arch/arm/mach-msm/include/mach/iommu.h - kernel/msm - Gitiles

 /* Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #ifndef MSM_IOMMU_H
 #define MSM_IOMMU_H

 #include <linux/interrupt.h>
 #include <linux/clk.h>
 #include <linux/list.h>
 #include <linux/regulator/consumer.h>
 #include <mach/socinfo.h>

 extern pgprot_t     pgprot_kernel;
 extern struct bus_type msm_iommu_sec_bus_type;

 /* Domain attributes */
 #define MSM_IOMMU_DOMAIN_PT_CACHEABLE	0x1
 #define MSM_IOMMU_DOMAIN_PT_SECURE	0x2

 /* Mask for the cache policy attribute */
 #define MSM_IOMMU_CP_MASK		0x03

 /* Maximum number of Machine IDs that we are allowing to be mapped to the same
  * context bank. The number of MIDs mapped to the same CB does not affect
  * performance, but there is a practical limit on how many distinct MIDs may
  * be present. These mappings are typically determined at design time and are
  * not expected to change at run time.
  */
 #define MAX_NUM_MIDS	32

 /* Maximum number of SMT entries allowed by the system */
 #define MAX_NUM_SMR	128

 #define MAX_NUM_BFB_REGS	32

 /**
  * struct msm_iommu_dev - a single IOMMU hardware instance
  * name		Human-readable name given to this IOMMU HW instance
  * ncb		Number of context banks present on this IOMMU HW instance
  */
 struct msm_iommu_dev {
 	const char *name;
 	int ncb;
 	int ttbr_split;
 };

 /**
  * struct msm_iommu_ctx_dev - an IOMMU context bank instance
  * name		Human-readable name given to this context bank
  * num		Index of this context bank within the hardware
  * mids		List of Machine IDs that are to be mapped into this context
  *		bank, terminated by -1. The MID is a set of signals on the
  *		AXI bus that identifies the function associated with a specific
  *		memory request. (See ARM spec).
  */
 struct msm_iommu_ctx_dev {
 	const char *name;
 	int num;
 	int mids[MAX_NUM_MIDS];
 };

 /**
  * struct msm_iommu_bfb_settings - a set of IOMMU BFB tuning parameters
  * regs		An array of register offsets to configure
  * data		Values to write to corresponding registers
  * length	Number of valid entries in the offset/val arrays
  */
 struct msm_iommu_bfb_settings {
 	unsigned int regs[MAX_NUM_BFB_REGS];
 	unsigned int data[MAX_NUM_BFB_REGS];
 	int length;
 };

 /**
  * struct msm_iommu_drvdata - A single IOMMU hardware instance
  * @base:	IOMMU config port base address (VA)
  * @glb_base:	IOMMU config port base address for global register space (VA)
  * @ncb		The number of contexts on this IOMMU
  * @irq:	Interrupt number
  * @clk:	The bus clock for this IOMMU hardware instance
  * @pclk:	The clock for the IOMMU bus interconnect
  * @aclk:	Alternate clock for this IOMMU core, if any
  * @name:	Human-readable name of this IOMMU device
  * @gdsc:	Regulator needed to power this HW block (v2 only)
  * @bfb_settings: Optional BFB performance tuning parameters
  * @dev:	Struct device this hardware instance is tied to
  * @list:	List head to link all iommus together
  * @clk_reg_virt: Optional clock register virtual address.
  * @halt_enabled: Set to 1 if IOMMU halt is supported in the IOMMU, 0 otherwise.
  * @asid:         List of ASID and their usage count (index is ASID value).
  * @ctx_attach_count: Count of how many context are attached.
  *
  * A msm_iommu_drvdata holds the global driver data about a single piece
  * of an IOMMU hardware instance.
  */
 struct msm_iommu_drvdata {
 	void __iomem *base;
 	void __iomem *glb_base;
 	int ncb;
 	int ttbr_split;
 	struct clk *clk;
 	struct clk *pclk;
 	struct clk *aclk;
 	const char *name;
 	struct regulator *gdsc;
 	struct regulator *alt_gdsc;
 	struct msm_iommu_bfb_settings *bfb_settings;
 	int sec_id;
 	struct device *dev;
 	struct list_head list;
 	void __iomem *clk_reg_virt;
 	int halt_enabled;
 	int *asid;
 	unsigned int ctx_attach_count;
 };

 void msm_iommu_add_drv(struct msm_iommu_drvdata *drv);
 void msm_iommu_remove_drv(struct msm_iommu_drvdata *drv);
 void program_iommu_bfb_settings(void __iomem *base,
 			const struct msm_iommu_bfb_settings *bfb_settings);
 void iommu_halt(const struct msm_iommu_drvdata *iommu_drvdata);
 void iommu_resume(const struct msm_iommu_drvdata *iommu_drvdata);

 /**
  * struct msm_iommu_ctx_drvdata - an IOMMU context bank instance
  * @num:		Hardware context number of this context
  * @pdev:		Platform device associated wit this HW instance
  * @attached_elm:	List element for domains to track which devices are
  *			attached to them
  * @attached_domain	Domain currently attached to this context (if any)
  * @name		Human-readable name of this context device
  * @sids		List of Stream IDs mapped to this context
  * @nsid		Number of Stream IDs mapped to this context
  * @secure_context	true if this is a secure context programmed by
 			the secure environment, false otherwise
  * @asid		ASID used with this context.
  * @attach_count	Number of time this context has been attached.
  *
  * A msm_iommu_ctx_drvdata holds the driver data for a single context bank
  * within each IOMMU hardware instance
  */
 struct msm_iommu_ctx_drvdata {
 	int num;
 	struct platform_device *pdev;
 	struct list_head attached_elm;
 	struct iommu_domain *attached_domain;
 	const char *name;
 	u32 sids[MAX_NUM_SMR];
 	unsigned int nsid;
 	unsigned int secure_context;
 	int asid;
 	int attach_count;
 };

 /*
  * Interrupt handler for the IOMMU context fault interrupt. Hooking the
  * interrupt is not supported in the API yet, but this will print an error
  * message and dump useful IOMMU registers.
  */
 irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id);
 irqreturn_t msm_iommu_fault_handler_v2(int irq, void *dev_id);

 enum {
 	PROC_APPS,
 	PROC_GPU,
 	PROC_MAX
 };

 /* Expose structure to allow kgsl iommu driver to use the same structure to
  * communicate to GPU the addresses of the flag and turn variables.
  */
 struct remote_iommu_petersons_spinlock {
 	uint32_t flag[PROC_MAX];
 	uint32_t turn;
 };

 #ifdef CONFIG_MSM_IOMMU
 void *msm_iommu_lock_initialize(void);
 void msm_iommu_mutex_lock(void);
 void msm_iommu_mutex_unlock(void);
 #else
 static inline void *msm_iommu_lock_initialize(void)
 {
 	return NULL;
 }
 static inline void msm_iommu_mutex_lock(void) { }
 static inline void msm_iommu_mutex_unlock(void) { }
 #endif

 #ifdef CONFIG_MSM_IOMMU_GPU_SYNC
 void msm_iommu_remote_p0_spin_lock(void);
 void msm_iommu_remote_p0_spin_unlock(void);

 #define msm_iommu_remote_lock_init() _msm_iommu_remote_spin_lock_init()
 #define msm_iommu_remote_spin_lock() msm_iommu_remote_p0_spin_lock()
 #define msm_iommu_remote_spin_unlock() msm_iommu_remote_p0_spin_unlock()
 #else
 #define msm_iommu_remote_lock_init()
 #define msm_iommu_remote_spin_lock()
 #define msm_iommu_remote_spin_unlock()
 #endif

 /* Allows kgsl iommu driver to acquire lock */
 #define msm_iommu_lock() \
 	do { \
 		msm_iommu_mutex_lock(); \
 		msm_iommu_remote_spin_lock(); \
 	} while (0)

 #define msm_iommu_unlock() \
 	do { \
 		msm_iommu_remote_spin_unlock(); \
 		msm_iommu_mutex_unlock(); \
 	} while (0)

 #ifdef CONFIG_MSM_IOMMU
 /*
  * Look up an IOMMU context device by its context name. NULL if none found.
  * Useful for testing and drivers that do not yet fully have IOMMU stuff in
  * their platform devices.
  */
 struct device *msm_iommu_get_ctx(const char *ctx_name);
 #else
 static inline struct device *msm_iommu_get_ctx(const char *ctx_name)
 {
 	return NULL;
 }
 #endif

 /*
  * Function to program the global registers of an IOMMU securely.
  * This should only be called on IOMMUs for which kernel programming
  * of global registers is not possible
  */
 int msm_iommu_sec_program_iommu(int sec_id);

 static inline int msm_soc_version_supports_iommu_v0(void)
 {
 #ifdef CONFIG_OF
 	struct device_node *node;

 	node = of_find_compatible_node(NULL, NULL, "qcom,msm-smmu-v1");
 	if (node) {
 		of_node_put(node);
 		return 0;
 	}

 	node = of_find_compatible_node(NULL, NULL, "qcom,msm-smmu-v0");
 	if (node) {
 		of_node_put(node);
 		return 1;
 	}
 #endif
 	if (cpu_is_msm8960() &&
 	    SOCINFO_VERSION_MAJOR(socinfo_get_version()) < 2)
 		return 0;

 	if (cpu_is_msm8x60() &&
 	    (SOCINFO_VERSION_MAJOR(socinfo_get_version()) != 2 ||
 	    SOCINFO_VERSION_MINOR(socinfo_get_version()) < 1))	{
 		return 0;
 	}
 	return 1;
 }
 #endif
	/* Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#ifndef MSM_IOMMU_H
	#define MSM_IOMMU_H

	#include <linux/interrupt.h>
	#include <linux/clk.h>
	#include <linux/list.h>
	#include <linux/regulator/consumer.h>
	#include <mach/socinfo.h>

	extern pgprot_t pgprot_kernel;
	extern struct bus_type msm_iommu_sec_bus_type;

	/* Domain attributes */
	#define MSM_IOMMU_DOMAIN_PT_CACHEABLE 0x1
	#define MSM_IOMMU_DOMAIN_PT_SECURE 0x2

	/* Mask for the cache policy attribute */
	#define MSM_IOMMU_CP_MASK 0x03

	/* Maximum number of Machine IDs that we are allowing to be mapped to the same
	* context bank. The number of MIDs mapped to the same CB does not affect
	* performance, but there is a practical limit on how many distinct MIDs may
	* be present. These mappings are typically determined at design time and are
	* not expected to change at run time.
	*/
	#define MAX_NUM_MIDS 32

	/* Maximum number of SMT entries allowed by the system */
	#define MAX_NUM_SMR 128

	#define MAX_NUM_BFB_REGS 32

	/**
	* struct msm_iommu_dev - a single IOMMU hardware instance
	* name Human-readable name given to this IOMMU HW instance
	* ncb Number of context banks present on this IOMMU HW instance
	*/
	struct msm_iommu_dev {
	const char *name;
	int ncb;
	int ttbr_split;
	};

	/**
	* struct msm_iommu_ctx_dev - an IOMMU context bank instance
	* name Human-readable name given to this context bank
	* num Index of this context bank within the hardware
	* mids List of Machine IDs that are to be mapped into this context
	* bank, terminated by -1. The MID is a set of signals on the
	* AXI bus that identifies the function associated with a specific
	* memory request. (See ARM spec).
	*/
	struct msm_iommu_ctx_dev {
	const char *name;
	int num;
	int mids[MAX_NUM_MIDS];
	};

	/**
	* struct msm_iommu_bfb_settings - a set of IOMMU BFB tuning parameters
	* regs An array of register offsets to configure
	* data Values to write to corresponding registers
	* length Number of valid entries in the offset/val arrays
	*/
	struct msm_iommu_bfb_settings {
	unsigned int regs[MAX_NUM_BFB_REGS];
	unsigned int data[MAX_NUM_BFB_REGS];
	int length;
	};

	/**
	* struct msm_iommu_drvdata - A single IOMMU hardware instance
	* @base: IOMMU config port base address (VA)
	* @glb_base: IOMMU config port base address for global register space (VA)
	* @ncb The number of contexts on this IOMMU
	* @irq: Interrupt number
	* @clk: The bus clock for this IOMMU hardware instance
	* @pclk: The clock for the IOMMU bus interconnect
	* @aclk: Alternate clock for this IOMMU core, if any
	* @name: Human-readable name of this IOMMU device
	* @gdsc: Regulator needed to power this HW block (v2 only)
	* @bfb_settings: Optional BFB performance tuning parameters
	* @dev: Struct device this hardware instance is tied to
	* @list: List head to link all iommus together
	* @clk_reg_virt: Optional clock register virtual address.
	* @halt_enabled: Set to 1 if IOMMU halt is supported in the IOMMU, 0 otherwise.
	* @asid: List of ASID and their usage count (index is ASID value).
	* @ctx_attach_count: Count of how many context are attached.
	*
	* A msm_iommu_drvdata holds the global driver data about a single piece
	* of an IOMMU hardware instance.
	*/
	struct msm_iommu_drvdata {
	void __iomem *base;
	void __iomem *glb_base;
	int ncb;
	int ttbr_split;
	struct clk *clk;
	struct clk *pclk;
	struct clk *aclk;
	const char *name;
	struct regulator *gdsc;
	struct regulator *alt_gdsc;
	struct msm_iommu_bfb_settings *bfb_settings;
	int sec_id;
	struct device *dev;
	struct list_head list;
	void __iomem *clk_reg_virt;
	int halt_enabled;
	int *asid;
	unsigned int ctx_attach_count;
	};

	void msm_iommu_add_drv(struct msm_iommu_drvdata *drv);
	void msm_iommu_remove_drv(struct msm_iommu_drvdata *drv);
	void program_iommu_bfb_settings(void __iomem *base,
	const struct msm_iommu_bfb_settings *bfb_settings);
	void iommu_halt(const struct msm_iommu_drvdata *iommu_drvdata);
	void iommu_resume(const struct msm_iommu_drvdata *iommu_drvdata);

	/**
	* struct msm_iommu_ctx_drvdata - an IOMMU context bank instance
	* @num: Hardware context number of this context
	* @pdev: Platform device associated wit this HW instance
	* @attached_elm: List element for domains to track which devices are
	* attached to them
	* @attached_domain Domain currently attached to this context (if any)
	* @name Human-readable name of this context device
	* @sids List of Stream IDs mapped to this context
	* @nsid Number of Stream IDs mapped to this context
	* @secure_context true if this is a secure context programmed by
	the secure environment, false otherwise
	* @asid ASID used with this context.
	* @attach_count Number of time this context has been attached.
	*
	* A msm_iommu_ctx_drvdata holds the driver data for a single context bank
	* within each IOMMU hardware instance
	*/
	struct msm_iommu_ctx_drvdata {
	int num;
	struct platform_device *pdev;
	struct list_head attached_elm;
	struct iommu_domain *attached_domain;
	const char *name;
	u32 sids[MAX_NUM_SMR];
	unsigned int nsid;
	unsigned int secure_context;
	int asid;
	int attach_count;
	};

	/*
	* Interrupt handler for the IOMMU context fault interrupt. Hooking the
	* interrupt is not supported in the API yet, but this will print an error
	* message and dump useful IOMMU registers.
	*/
	irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id);
	irqreturn_t msm_iommu_fault_handler_v2(int irq, void *dev_id);

	enum {
	PROC_APPS,
	PROC_GPU,
	PROC_MAX
	};

	/* Expose structure to allow kgsl iommu driver to use the same structure to
	* communicate to GPU the addresses of the flag and turn variables.
	*/
	struct remote_iommu_petersons_spinlock {
	uint32_t flag[PROC_MAX];
	uint32_t turn;
	};

	#ifdef CONFIG_MSM_IOMMU
	void *msm_iommu_lock_initialize(void);
	void msm_iommu_mutex_lock(void);
	void msm_iommu_mutex_unlock(void);
	#else
	static inline void *msm_iommu_lock_initialize(void)
	{
	return NULL;
	}
	static inline void msm_iommu_mutex_lock(void) { }
	static inline void msm_iommu_mutex_unlock(void) { }
	#endif

	#ifdef CONFIG_MSM_IOMMU_GPU_SYNC
	void msm_iommu_remote_p0_spin_lock(void);
	void msm_iommu_remote_p0_spin_unlock(void);

	#define msm_iommu_remote_lock_init() _msm_iommu_remote_spin_lock_init()
	#define msm_iommu_remote_spin_lock() msm_iommu_remote_p0_spin_lock()
	#define msm_iommu_remote_spin_unlock() msm_iommu_remote_p0_spin_unlock()
	#else
	#define msm_iommu_remote_lock_init()
	#define msm_iommu_remote_spin_lock()
	#define msm_iommu_remote_spin_unlock()
	#endif

	/* Allows kgsl iommu driver to acquire lock */
	#define msm_iommu_lock() \
	do { \
	msm_iommu_mutex_lock(); \
	msm_iommu_remote_spin_lock(); \
	} while (0)

	#define msm_iommu_unlock() \
	do { \
	msm_iommu_remote_spin_unlock(); \
	msm_iommu_mutex_unlock(); \
	} while (0)

	#ifdef CONFIG_MSM_IOMMU
	/*
	* Look up an IOMMU context device by its context name. NULL if none found.
	* Useful for testing and drivers that do not yet fully have IOMMU stuff in
	* their platform devices.
	*/
	struct device msm_iommu_get_ctx(const char ctx_name);
	#else
	static inline struct device msm_iommu_get_ctx(const char ctx_name)
	{
	return NULL;
	}
	#endif

	/*
	* Function to program the global registers of an IOMMU securely.
	* This should only be called on IOMMUs for which kernel programming
	* of global registers is not possible
	*/
	int msm_iommu_sec_program_iommu(int sec_id);

	static inline int msm_soc_version_supports_iommu_v0(void)
	{
	#ifdef CONFIG_OF
	struct device_node *node;

	node = of_find_compatible_node(NULL, NULL, "qcom,msm-smmu-v1");
	if (node) {
	of_node_put(node);
	return 0;
	}

	node = of_find_compatible_node(NULL, NULL, "qcom,msm-smmu-v0");
	if (node) {
	of_node_put(node);
	return 1;
	}
	#endif
	if (cpu_is_msm8960() &&
	SOCINFO_VERSION_MAJOR(socinfo_get_version()) < 2)
	return 0;

	if (cpu_is_msm8x60() &&
	(SOCINFO_VERSION_MAJOR(socinfo_get_version()) != 2 \|\|
	SOCINFO_VERSION_MINOR(socinfo_get_version()) < 1)) {
	return 0;
	}
	return 1;
	}
	#endif