| #ifndef _ASM_HW_IRQ_H |
| #define _ASM_HW_IRQ_H |
| |
| /* |
| * linux/include/asm/hw_irq.h |
| * |
| * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar |
| * |
| * moved some of the old arch/i386/kernel/irq.h to here. VY |
| * |
| * IRQ/IPI changes taken from work by Thomas Radke |
| * <tomsoft@informatik.tu-chemnitz.de> |
| * |
| * hacked by Andi Kleen for x86-64. |
| */ |
| |
| #ifndef __ASSEMBLY__ |
| #include <asm/atomic.h> |
| #include <asm/irq.h> |
| #include <linux/profile.h> |
| #include <linux/smp.h> |
| #include <linux/percpu.h> |
| #endif |
| |
| #define NMI_VECTOR 0x02 |
| /* |
| * IDT vectors usable for external interrupt sources start |
| * at 0x20: |
| */ |
| #define FIRST_EXTERNAL_VECTOR 0x20 |
| |
| #define IA32_SYSCALL_VECTOR 0x80 |
| |
| |
| /* Reserve the lowest usable priority level 0x20 - 0x2f for triggering |
| * cleanup after irq migration. |
| */ |
| #define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR |
| |
| /* |
| * Vectors 0x30-0x3f are used for ISA interrupts. |
| */ |
| #define IRQ0_VECTOR FIRST_EXTERNAL_VECTOR + 0x10 |
| #define IRQ1_VECTOR IRQ0_VECTOR + 1 |
| #define IRQ2_VECTOR IRQ0_VECTOR + 2 |
| #define IRQ3_VECTOR IRQ0_VECTOR + 3 |
| #define IRQ4_VECTOR IRQ0_VECTOR + 4 |
| #define IRQ5_VECTOR IRQ0_VECTOR + 5 |
| #define IRQ6_VECTOR IRQ0_VECTOR + 6 |
| #define IRQ7_VECTOR IRQ0_VECTOR + 7 |
| #define IRQ8_VECTOR IRQ0_VECTOR + 8 |
| #define IRQ9_VECTOR IRQ0_VECTOR + 9 |
| #define IRQ10_VECTOR IRQ0_VECTOR + 10 |
| #define IRQ11_VECTOR IRQ0_VECTOR + 11 |
| #define IRQ12_VECTOR IRQ0_VECTOR + 12 |
| #define IRQ13_VECTOR IRQ0_VECTOR + 13 |
| #define IRQ14_VECTOR IRQ0_VECTOR + 14 |
| #define IRQ15_VECTOR IRQ0_VECTOR + 15 |
| |
| /* |
| * Special IRQ vectors used by the SMP architecture, 0xf0-0xff |
| * |
| * some of the following vectors are 'rare', they are merged |
| * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. |
| * TLB, reschedule and local APIC vectors are performance-critical. |
| */ |
| #define SPURIOUS_APIC_VECTOR 0xff |
| #define ERROR_APIC_VECTOR 0xfe |
| #define RESCHEDULE_VECTOR 0xfd |
| #define CALL_FUNCTION_VECTOR 0xfc |
| /* fb free - please don't readd KDB here because it's useless |
| (hint - think what a NMI bit does to a vector) */ |
| #define THERMAL_APIC_VECTOR 0xfa |
| #define THRESHOLD_APIC_VECTOR 0xf9 |
| /* f8 free */ |
| #define INVALIDATE_TLB_VECTOR_END 0xf7 |
| #define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */ |
| |
| #define NUM_INVALIDATE_TLB_VECTORS 8 |
| |
| /* |
| * Local APIC timer IRQ vector is on a different priority level, |
| * to work around the 'lost local interrupt if more than 2 IRQ |
| * sources per level' errata. |
| */ |
| #define LOCAL_TIMER_VECTOR 0xef |
| |
| /* |
| * First APIC vector available to drivers: (vectors 0x30-0xee) |
| * we start at 0x41 to spread out vectors evenly between priority |
| * levels. (0x80 is the syscall vector) |
| */ |
| #define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2) |
| #define FIRST_SYSTEM_VECTOR 0xef /* duplicated in irq.h */ |
| |
| |
| #ifndef __ASSEMBLY__ |
| typedef int vector_irq_t[NR_VECTORS]; |
| DECLARE_PER_CPU(vector_irq_t, vector_irq); |
| extern void __setup_vector_irq(int cpu); |
| extern spinlock_t vector_lock; |
| |
| /* |
| * Various low-level irq details needed by irq.c, process.c, |
| * time.c, io_apic.c and smp.c |
| * |
| * Interrupt entry/exit code at both C and assembly level |
| */ |
| |
| extern void disable_8259A_irq(unsigned int irq); |
| extern void enable_8259A_irq(unsigned int irq); |
| extern int i8259A_irq_pending(unsigned int irq); |
| extern void make_8259A_irq(unsigned int irq); |
| extern void init_8259A(int aeoi); |
| extern void send_IPI_self(int vector); |
| extern void init_VISWS_APIC_irqs(void); |
| extern void setup_IO_APIC(void); |
| extern void disable_IO_APIC(void); |
| extern void print_IO_APIC(void); |
| extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); |
| extern void send_IPI(int dest, int vector); |
| extern void setup_ioapic_dest(void); |
| |
| extern unsigned long io_apic_irqs; |
| |
| extern atomic_t irq_err_count; |
| extern atomic_t irq_mis_count; |
| |
| #define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs)) |
| |
| #define __STR(x) #x |
| #define STR(x) __STR(x) |
| |
| #include <asm/ptrace.h> |
| |
| #define IRQ_NAME2(nr) nr##_interrupt(void) |
| #define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) |
| |
| /* |
| * SMP has a few special interrupts for IPI messages |
| */ |
| |
| #define BUILD_IRQ(nr) \ |
| asmlinkage void IRQ_NAME(nr); \ |
| __asm__( \ |
| "\n.p2align\n" \ |
| "IRQ" #nr "_interrupt:\n\t" \ |
| "push $~(" #nr ") ; " \ |
| "jmp common_interrupt"); |
| |
| #define platform_legacy_irq(irq) ((irq) < 16) |
| |
| #endif |
| |
| #endif /* _ASM_HW_IRQ_H */ |