Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (425 commits)
V4L/DVB (11870): gspca - main: VIDIOC_ENUM_FRAMESIZES ioctl added.
V4L/DVB (12004): poll method lose race condition
V4L/DVB (11894): flexcop-pci: dmesg visible names broken
V4L/DVB (11892): Siano: smsendian - declare function as extern
V4L/DVB (11891): Siano: smscore - bind the GPIO SMS protocol
V4L/DVB (11890): Siano: smscore - remove redundant code
V4L/DVB (11889): Siano: smsdvb - add DVB v3 events
V4L/DVB (11888): Siano: smsusb - remove redundant ifdef
V4L/DVB (11887): Siano: smscards - add board (target) events
V4L/DVB (11886): Siano: smscore - fix some new GPIO definitions names
V4L/DVB (11885): Siano: Add new GPIO management interface
V4L/DVB (11884): Siano: smssdio - revert to stand alone module
V4L/DVB (11883): Siano: cards - add two additional (USB) devices
V4L/DVB (11824): Siano: smsusb - change exit func debug msg
V4L/DVB (11823): Siano: smsusb - fix typo in module description
V4L/DVB (11822): Siano: smscore - bug fix at get_device_mode
V4L/DVB (11821): Siano: smscore - fix isdb-t firmware name
V4L/DVB (11820): Siano: smscore - fix byte ordering bug
V4L/DVB (11819): Siano: smscore - fix get_common_buffer bug
V4L/DVB (11818): Siano: smscards - assign gpio to HPG targets
...
diff --git a/Documentation/DocBook/debugobjects.tmpl b/Documentation/DocBook/debugobjects.tmpl
index 7f5f218..08ff908 100644
--- a/Documentation/DocBook/debugobjects.tmpl
+++ b/Documentation/DocBook/debugobjects.tmpl
@@ -106,7 +106,7 @@
number of errors are printk'ed including a full stack trace.
</para>
<para>
- The statistics are available via debugfs/debug_objects/stats.
+ The statistics are available via /sys/kernel/debug/debug_objects/stats.
They provide information about the number of warnings and the
number of successful fixups along with information about the
usage of the internal tracking objects and the state of the
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index 7ea2311..aa73e72 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -246,7 +246,8 @@
int main(int argc, char *argv[])
{
- int c, rc, rep_len, aggr_len, len2, cmd_type;
+ int c, rc, rep_len, aggr_len, len2;
+ int cmd_type = TASKSTATS_CMD_ATTR_UNSPEC;
__u16 id;
__u32 mypid;
diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt
index 4ef2450..396bec3 100644
--- a/Documentation/atomic_ops.txt
+++ b/Documentation/atomic_ops.txt
@@ -229,10 +229,10 @@
counting, and it works such that once the counter falls to zero it can
be guaranteed that no other entity can be accessing the object:
-static void obj_list_add(struct obj *obj)
+static void obj_list_add(struct obj *obj, struct list_head *head)
{
obj->active = 1;
- list_add(&obj->list);
+ list_add(&obj->list, head);
}
static void obj_list_del(struct obj *obj)
diff --git a/Documentation/cdrom/packet-writing.txt b/Documentation/cdrom/packet-writing.txt
index cf1f812..1c40777 100644
--- a/Documentation/cdrom/packet-writing.txt
+++ b/Documentation/cdrom/packet-writing.txt
@@ -117,7 +117,7 @@
To read pktcdvd device infos in human readable form, do:
- # cat /debug/pktcdvd/pktcdvd[0-7]/info
+ # cat /sys/kernel/debug/pktcdvd/pktcdvd[0-7]/info
For a description of the debugfs interface look into the file:
diff --git a/Documentation/driver-model/device.txt b/Documentation/driver-model/device.txt
index a7cbfff..a124f31 100644
--- a/Documentation/driver-model/device.txt
+++ b/Documentation/driver-model/device.txt
@@ -162,3 +162,35 @@
The file name will be 'power' with a mode of 0644 (-rw-r--r--).
+Word of warning: While the kernel allows device_create_file() and
+device_remove_file() to be called on a device at any time, userspace has
+strict expectations on when attributes get created. When a new device is
+registered in the kernel, a uevent is generated to notify userspace (like
+udev) that a new device is available. If attributes are added after the
+device is registered, then userspace won't get notified and userspace will
+not know about the new attributes.
+
+This is important for device driver that need to publish additional
+attributes for a device at driver probe time. If the device driver simply
+calls device_create_file() on the device structure passed to it, then
+userspace will never be notified of the new attributes. Instead, it should
+probably use class_create() and class->dev_attrs to set up a list of
+desired attributes in the modules_init function, and then in the .probe()
+hook, and then use device_create() to create a new device as a child
+of the probed device. The new device will generate a new uevent and
+properly advertise the new attributes to userspace.
+
+For example, if a driver wanted to add the following attributes:
+struct device_attribute mydriver_attribs[] = {
+ __ATTR(port_count, 0444, port_count_show),
+ __ATTR(serial_number, 0444, serial_number_show),
+ NULL
+};
+
+Then in the module init function is would do:
+ mydriver_class = class_create(THIS_MODULE, "my_attrs");
+ mydriver_class.dev_attr = mydriver_attribs;
+
+And assuming 'dev' is the struct device passed into the probe hook, the driver
+probe function would do something like:
+ create_device(&mydriver_class, dev, chrdev, &private_data, "my_name");
diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt
index 4bc374a..0793056 100644
--- a/Documentation/fault-injection/fault-injection.txt
+++ b/Documentation/fault-injection/fault-injection.txt
@@ -29,16 +29,16 @@
fault-inject-debugfs kernel module provides some debugfs entries for runtime
configuration of fault-injection capabilities.
-- /debug/fail*/probability:
+- /sys/kernel/debug/fail*/probability:
likelihood of failure injection, in percent.
Format: <percent>
Note that one-failure-per-hundred is a very high error rate
for some testcases. Consider setting probability=100 and configure
- /debug/fail*/interval for such testcases.
+ /sys/kernel/debug/fail*/interval for such testcases.
-- /debug/fail*/interval:
+- /sys/kernel/debug/fail*/interval:
specifies the interval between failures, for calls to
should_fail() that pass all the other tests.
@@ -46,18 +46,18 @@
Note that if you enable this, by setting interval>1, you will
probably want to set probability=100.
-- /debug/fail*/times:
+- /sys/kernel/debug/fail*/times:
specifies how many times failures may happen at most.
A value of -1 means "no limit".
-- /debug/fail*/space:
+- /sys/kernel/debug/fail*/space:
specifies an initial resource "budget", decremented by "size"
on each call to should_fail(,size). Failure injection is
suppressed until "space" reaches zero.
-- /debug/fail*/verbose
+- /sys/kernel/debug/fail*/verbose
Format: { 0 | 1 | 2 }
specifies the verbosity of the messages when failure is
@@ -65,17 +65,17 @@
log line per failure; '2' will print a call trace too -- useful
to debug the problems revealed by fault injection.
-- /debug/fail*/task-filter:
+- /sys/kernel/debug/fail*/task-filter:
Format: { 'Y' | 'N' }
A value of 'N' disables filtering by process (default).
Any positive value limits failures to only processes indicated by
/proc/<pid>/make-it-fail==1.
-- /debug/fail*/require-start:
-- /debug/fail*/require-end:
-- /debug/fail*/reject-start:
-- /debug/fail*/reject-end:
+- /sys/kernel/debug/fail*/require-start:
+- /sys/kernel/debug/fail*/require-end:
+- /sys/kernel/debug/fail*/reject-start:
+- /sys/kernel/debug/fail*/reject-end:
specifies the range of virtual addresses tested during
stacktrace walking. Failure is injected only if some caller
@@ -84,26 +84,26 @@
Default required range is [0,ULONG_MAX) (whole of virtual address space).
Default rejected range is [0,0).
-- /debug/fail*/stacktrace-depth:
+- /sys/kernel/debug/fail*/stacktrace-depth:
specifies the maximum stacktrace depth walked during search
for a caller within [require-start,require-end) OR
[reject-start,reject-end).
-- /debug/fail_page_alloc/ignore-gfp-highmem:
+- /sys/kernel/debug/fail_page_alloc/ignore-gfp-highmem:
Format: { 'Y' | 'N' }
default is 'N', setting it to 'Y' won't inject failures into
highmem/user allocations.
-- /debug/failslab/ignore-gfp-wait:
-- /debug/fail_page_alloc/ignore-gfp-wait:
+- /sys/kernel/debug/failslab/ignore-gfp-wait:
+- /sys/kernel/debug/fail_page_alloc/ignore-gfp-wait:
Format: { 'Y' | 'N' }
default is 'N', setting it to 'Y' will inject failures
only into non-sleep allocations (GFP_ATOMIC allocations).
-- /debug/fail_page_alloc/min-order:
+- /sys/kernel/debug/fail_page_alloc/min-order:
specifies the minimum page allocation order to be injected
failures.
@@ -166,13 +166,13 @@
#!/bin/bash
FAILTYPE=failslab
-echo Y > /debug/$FAILTYPE/task-filter
-echo 10 > /debug/$FAILTYPE/probability
-echo 100 > /debug/$FAILTYPE/interval
-echo -1 > /debug/$FAILTYPE/times
-echo 0 > /debug/$FAILTYPE/space
-echo 2 > /debug/$FAILTYPE/verbose
-echo 1 > /debug/$FAILTYPE/ignore-gfp-wait
+echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
+echo 10 > /sys/kernel/debug/$FAILTYPE/probability
+echo 100 > /sys/kernel/debug/$FAILTYPE/interval
+echo -1 > /sys/kernel/debug/$FAILTYPE/times
+echo 0 > /sys/kernel/debug/$FAILTYPE/space
+echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
faulty_system()
{
@@ -217,20 +217,20 @@
exit 1
fi
-cat /sys/module/$module/sections/.text > /debug/$FAILTYPE/require-start
-cat /sys/module/$module/sections/.data > /debug/$FAILTYPE/require-end
+cat /sys/module/$module/sections/.text > /sys/kernel/debug/$FAILTYPE/require-start
+cat /sys/module/$module/sections/.data > /sys/kernel/debug/$FAILTYPE/require-end
-echo N > /debug/$FAILTYPE/task-filter
-echo 10 > /debug/$FAILTYPE/probability
-echo 100 > /debug/$FAILTYPE/interval
-echo -1 > /debug/$FAILTYPE/times
-echo 0 > /debug/$FAILTYPE/space
-echo 2 > /debug/$FAILTYPE/verbose
-echo 1 > /debug/$FAILTYPE/ignore-gfp-wait
-echo 1 > /debug/$FAILTYPE/ignore-gfp-highmem
-echo 10 > /debug/$FAILTYPE/stacktrace-depth
+echo N > /sys/kernel/debug/$FAILTYPE/task-filter
+echo 10 > /sys/kernel/debug/$FAILTYPE/probability
+echo 100 > /sys/kernel/debug/$FAILTYPE/interval
+echo -1 > /sys/kernel/debug/$FAILTYPE/times
+echo 0 > /sys/kernel/debug/$FAILTYPE/space
+echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem
+echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth
-trap "echo 0 > /debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
+trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
echo "Injecting errors into the module $module... (interrupt to stop)"
sleep 1000000
diff --git a/Documentation/fb/vesafb.txt b/Documentation/fb/vesafb.txt
index ee277dd..950d5a6 100644
--- a/Documentation/fb/vesafb.txt
+++ b/Documentation/fb/vesafb.txt
@@ -95,7 +95,7 @@
booting linux. If you are not happy with the 60 Hz refresh rate, you
have these options:
- * configure and load the DOS-Tools for your the graphics board (if
+ * configure and load the DOS-Tools for the graphics board (if
available) and boot linux with loadlin.
* use a native driver (matroxfb/atyfb) instead if vesafb. If none
is available, write a new one!
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index cd8717a..ebff3c1 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1003,11 +1003,13 @@
3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score
------------------------------------------------------
-This file can be used to adjust the score used to select which processes
-should be killed in an out-of-memory situation. Giving it a high score will
-increase the likelihood of this process being killed by the oom-killer. Valid
-values are in the range -16 to +15, plus the special value -17, which disables
-oom-killing altogether for this process.
+This file can be used to adjust the score used to select which processes should
+be killed in an out-of-memory situation. The oom_adj value is a characteristic
+of the task's mm, so all threads that share an mm with pid will have the same
+oom_adj value. A high value will increase the likelihood of this process being
+killed by the oom-killer. Valid values are in the range -16 to +15 as
+explained below and a special value of -17, which disables oom-killing
+altogether for threads sharing pid's mm.
The process to be killed in an out-of-memory situation is selected among all others
based on its badness score. This value equals the original memory size of the process
@@ -1021,6 +1023,9 @@
are the prime candidates to be killed. Having only one 'hungry' child will make
parent less preferable than the child.
+/proc/<pid>/oom_adj cannot be changed for kthreads since they are immune from
+oom-killing already.
+
/proc/<pid>/oom_score shows process' current badness score.
The following heuristics are then applied:
diff --git a/Documentation/firmware_class/README b/Documentation/firmware_class/README
index c3480aa..7eceaff 100644
--- a/Documentation/firmware_class/README
+++ b/Documentation/firmware_class/README
@@ -77,7 +77,8 @@
seconds for the whole load operation.
- request_firmware_nowait() is also provided for convenience in
- non-user contexts.
+ user contexts to request firmware asynchronously, but can't be called
+ in atomic contexts.
about in-kernel persistence:
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index ad38006..5578248 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -546,6 +546,10 @@
console=brl,ttyS0
For now, only VisioBraille is supported.
+ consoleblank= [KNL] The console blank (screen saver) timeout in
+ seconds. Defaults to 10*60 = 10mins. A value of 0
+ disables the blank timer.
+
coredump_filter=
[KNL] Change the default value for
/proc/<pid>/coredump_filter.
diff --git a/Documentation/kmemcheck.txt b/Documentation/kmemcheck.txt
new file mode 100644
index 0000000..3630446
--- /dev/null
+++ b/Documentation/kmemcheck.txt
@@ -0,0 +1,773 @@
+GETTING STARTED WITH KMEMCHECK
+==============================
+
+Vegard Nossum <vegardno@ifi.uio.no>
+
+
+Contents
+========
+0. Introduction
+1. Downloading
+2. Configuring and compiling
+3. How to use
+3.1. Booting
+3.2. Run-time enable/disable
+3.3. Debugging
+3.4. Annotating false positives
+4. Reporting errors
+5. Technical description
+
+
+0. Introduction
+===============
+
+kmemcheck is a debugging feature for the Linux Kernel. More specifically, it
+is a dynamic checker that detects and warns about some uses of uninitialized
+memory.
+
+Userspace programmers might be familiar with Valgrind's memcheck. The main
+difference between memcheck and kmemcheck is that memcheck works for userspace
+programs only, and kmemcheck works for the kernel only. The implementations
+are of course vastly different. Because of this, kmemcheck is not as accurate
+as memcheck, but it turns out to be good enough in practice to discover real
+programmer errors that the compiler is not able to find through static
+analysis.
+
+Enabling kmemcheck on a kernel will probably slow it down to the extent that
+the machine will not be usable for normal workloads such as e.g. an
+interactive desktop. kmemcheck will also cause the kernel to use about twice
+as much memory as normal. For this reason, kmemcheck is strictly a debugging
+feature.
+
+
+1. Downloading
+==============
+
+kmemcheck can only be downloaded using git. If you want to write patches
+against the current code, you should use the kmemcheck development branch of
+the tip tree. It is also possible to use the linux-next tree, which also
+includes the latest version of kmemcheck.
+
+Assuming that you've already cloned the linux-2.6.git repository, all you
+have to do is add the -tip tree as a remote, like this:
+
+ $ git remote add tip git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git
+
+To actually download the tree, fetch the remote:
+
+ $ git fetch tip
+
+And to check out a new local branch with the kmemcheck code:
+
+ $ git checkout -b kmemcheck tip/kmemcheck
+
+General instructions for the -tip tree can be found here:
+http://people.redhat.com/mingo/tip.git/readme.txt
+
+
+2. Configuring and compiling
+============================
+
+kmemcheck only works for the x86 (both 32- and 64-bit) platform. A number of
+configuration variables must have specific settings in order for the kmemcheck
+menu to even appear in "menuconfig". These are:
+
+ o CONFIG_CC_OPTIMIZE_FOR_SIZE=n
+
+ This option is located under "General setup" / "Optimize for size".
+
+ Without this, gcc will use certain optimizations that usually lead to
+ false positive warnings from kmemcheck. An example of this is a 16-bit
+ field in a struct, where gcc may load 32 bits, then discard the upper
+ 16 bits. kmemcheck sees only the 32-bit load, and may trigger a
+ warning for the upper 16 bits (if they're uninitialized).
+
+ o CONFIG_SLAB=y or CONFIG_SLUB=y
+
+ This option is located under "General setup" / "Choose SLAB
+ allocator".
+
+ o CONFIG_FUNCTION_TRACER=n
+
+ This option is located under "Kernel hacking" / "Tracers" / "Kernel
+ Function Tracer"
+
+ When function tracing is compiled in, gcc emits a call to another
+ function at the beginning of every function. This means that when the
+ page fault handler is called, the ftrace framework will be called
+ before kmemcheck has had a chance to handle the fault. If ftrace then
+ modifies memory that was tracked by kmemcheck, the result is an
+ endless recursive page fault.
+
+ o CONFIG_DEBUG_PAGEALLOC=n
+
+ This option is located under "Kernel hacking" / "Debug page memory
+ allocations".
+
+In addition, I highly recommend turning on CONFIG_DEBUG_INFO=y. This is also
+located under "Kernel hacking". With this, you will be able to get line number
+information from the kmemcheck warnings, which is extremely valuable in
+debugging a problem. This option is not mandatory, however, because it slows
+down the compilation process and produces a much bigger kernel image.
+
+Now the kmemcheck menu should be visible (under "Kernel hacking" / "kmemcheck:
+trap use of uninitialized memory"). Here follows a description of the
+kmemcheck configuration variables:
+
+ o CONFIG_KMEMCHECK
+
+ This must be enabled in order to use kmemcheck at all...
+
+ o CONFIG_KMEMCHECK_[DISABLED | ENABLED | ONESHOT]_BY_DEFAULT
+
+ This option controls the status of kmemcheck at boot-time. "Enabled"
+ will enable kmemcheck right from the start, "disabled" will boot the
+ kernel as normal (but with the kmemcheck code compiled in, so it can
+ be enabled at run-time after the kernel has booted), and "one-shot" is
+ a special mode which will turn kmemcheck off automatically after
+ detecting the first use of uninitialized memory.
+
+ If you are using kmemcheck to actively debug a problem, then you
+ probably want to choose "enabled" here.
+
+ The one-shot mode is mostly useful in automated test setups because it
+ can prevent floods of warnings and increase the chances of the machine
+ surviving in case something is really wrong. In other cases, the one-
+ shot mode could actually be counter-productive because it would turn
+ itself off at the very first error -- in the case of a false positive
+ too -- and this would come in the way of debugging the specific
+ problem you were interested in.
+
+ If you would like to use your kernel as normal, but with a chance to
+ enable kmemcheck in case of some problem, it might be a good idea to
+ choose "disabled" here. When kmemcheck is disabled, most of the run-
+ time overhead is not incurred, and the kernel will be almost as fast
+ as normal.
+
+ o CONFIG_KMEMCHECK_QUEUE_SIZE
+
+ Select the maximum number of error reports to store in an internal
+ (fixed-size) buffer. Since errors can occur virtually anywhere and in
+ any context, we need a temporary storage area which is guaranteed not
+ to generate any other page faults when accessed. The queue will be
+ emptied as soon as a tasklet may be scheduled. If the queue is full,
+ new error reports will be lost.
+
+ The default value of 64 is probably fine. If some code produces more
+ than 64 errors within an irqs-off section, then the code is likely to
+ produce many, many more, too, and these additional reports seldom give
+ any more information (the first report is usually the most valuable
+ anyway).
+
+ This number might have to be adjusted if you are not using serial
+ console or similar to capture the kernel log. If you are using the
+ "dmesg" command to save the log, then getting a lot of kmemcheck
+ warnings might overflow the kernel log itself, and the earlier reports
+ will get lost in that way instead. Try setting this to 10 or so on
+ such a setup.
+
+ o CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT
+
+ Select the number of shadow bytes to save along with each entry of the
+ error-report queue. These bytes indicate what parts of an allocation
+ are initialized, uninitialized, etc. and will be displayed when an
+ error is detected to help the debugging of a particular problem.
+
+ The number entered here is actually the logarithm of the number of
+ bytes that will be saved. So if you pick for example 5 here, kmemcheck
+ will save 2^5 = 32 bytes.
+
+ The default value should be fine for debugging most problems. It also
+ fits nicely within 80 columns.
+
+ o CONFIG_KMEMCHECK_PARTIAL_OK
+
+ This option (when enabled) works around certain GCC optimizations that
+ produce 32-bit reads from 16-bit variables where the upper 16 bits are
+ thrown away afterwards.
+
+ The default value (enabled) is recommended. This may of course hide
+ some real errors, but disabling it would probably produce a lot of
+ false positives.
+
+ o CONFIG_KMEMCHECK_BITOPS_OK
+
+ This option silences warnings that would be generated for bit-field
+ accesses where not all the bits are initialized at the same time. This
+ may also hide some real bugs.
+
+ This option is probably obsolete, or it should be replaced with
+ the kmemcheck-/bitfield-annotations for the code in question. The
+ default value is therefore fine.
+
+Now compile the kernel as usual.
+
+
+3. How to use
+=============
+
+3.1. Booting
+============
+
+First some information about the command-line options. There is only one
+option specific to kmemcheck, and this is called "kmemcheck". It can be used
+to override the default mode as chosen by the CONFIG_KMEMCHECK_*_BY_DEFAULT
+option. Its possible settings are:
+
+ o kmemcheck=0 (disabled)
+ o kmemcheck=1 (enabled)
+ o kmemcheck=2 (one-shot mode)
+
+If SLUB debugging has been enabled in the kernel, it may take precedence over
+kmemcheck in such a way that the slab caches which are under SLUB debugging
+will not be tracked by kmemcheck. In order to ensure that this doesn't happen
+(even though it shouldn't by default), use SLUB's boot option "slub_debug",
+like this: slub_debug=-
+
+In fact, this option may also be used for fine-grained control over SLUB vs.
+kmemcheck. For example, if the command line includes "kmemcheck=1
+slub_debug=,dentry", then SLUB debugging will be used only for the "dentry"
+slab cache, and with kmemcheck tracking all the other caches. This is advanced
+usage, however, and is not generally recommended.
+
+
+3.2. Run-time enable/disable
+============================
+
+When the kernel has booted, it is possible to enable or disable kmemcheck at
+run-time. WARNING: This feature is still experimental and may cause false
+positive warnings to appear. Therefore, try not to use this. If you find that
+it doesn't work properly (e.g. you see an unreasonable amount of warnings), I
+will be happy to take bug reports.
+
+Use the file /proc/sys/kernel/kmemcheck for this purpose, e.g.:
+
+ $ echo 0 > /proc/sys/kernel/kmemcheck # disables kmemcheck
+
+The numbers are the same as for the kmemcheck= command-line option.
+
+
+3.3. Debugging
+==============
+
+A typical report will look something like this:
+
+WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
+80000000000000000000000000000000000000000088ffff0000000000000000
+ i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
+ ^
+
+Pid: 1856, comm: ntpdate Not tainted 2.6.29-rc5 #264 945P-A
+RIP: 0010:[<ffffffff8104ede8>] [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
+RSP: 0018:ffff88003cdf7d98 EFLAGS: 00210002
+RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
+RDX: ffff88003e5d6018 RSI: ffff88003e5d6024 RDI: ffff88003cdf7e84
+RBP: ffff88003cdf7db8 R08: ffff88003e5d6000 R09: 0000000000000000
+R10: 0000000000000080 R11: 0000000000000000 R12: 000000000000000e
+R13: ffff88003cdf7e78 R14: ffff88003d530710 R15: ffff88003d5a98c8
+FS: 0000000000000000(0000) GS:ffff880001982000(0063) knlGS:00000
+CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
+CR2: ffff88003f806ea0 CR3: 000000003c036000 CR4: 00000000000006a0
+DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
+DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
+ [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
+ [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
+ [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
+ [<ffffffff8100c7b5>] int_signal+0x12/0x17
+ [<ffffffffffffffff>] 0xffffffffffffffff
+
+The single most valuable information in this report is the RIP (or EIP on 32-
+bit) value. This will help us pinpoint exactly which instruction that caused
+the warning.
+
+If your kernel was compiled with CONFIG_DEBUG_INFO=y, then all we have to do
+is give this address to the addr2line program, like this:
+
+ $ addr2line -e vmlinux -i ffffffff8104ede8
+ arch/x86/include/asm/string_64.h:12
+ include/asm-generic/siginfo.h:287
+ kernel/signal.c:380
+ kernel/signal.c:410
+
+The "-e vmlinux" tells addr2line which file to look in. IMPORTANT: This must
+be the vmlinux of the kernel that produced the warning in the first place! If
+not, the line number information will almost certainly be wrong.
+
+The "-i" tells addr2line to also print the line numbers of inlined functions.
+In this case, the flag was very important, because otherwise, it would only
+have printed the first line, which is just a call to memcpy(), which could be
+called from a thousand places in the kernel, and is therefore not very useful.
+These inlined functions would not show up in the stack trace above, simply
+because the kernel doesn't load the extra debugging information. This
+technique can of course be used with ordinary kernel oopses as well.
+
+In this case, it's the caller of memcpy() that is interesting, and it can be
+found in include/asm-generic/siginfo.h, line 287:
+
+281 static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+282 {
+283 if (from->si_code < 0)
+284 memcpy(to, from, sizeof(*to));
+285 else
+286 /* _sigchld is currently the largest know union member */
+287 memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
+288 }
+
+Since this was a read (kmemcheck usually warns about reads only, though it can
+warn about writes to unallocated or freed memory as well), it was probably the
+"from" argument which contained some uninitialized bytes. Following the chain
+of calls, we move upwards to see where "from" was allocated or initialized,
+kernel/signal.c, line 380:
+
+359 static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
+360 {
+...
+367 list_for_each_entry(q, &list->list, list) {
+368 if (q->info.si_signo == sig) {
+369 if (first)
+370 goto still_pending;
+371 first = q;
+...
+377 if (first) {
+378 still_pending:
+379 list_del_init(&first->list);
+380 copy_siginfo(info, &first->info);
+381 __sigqueue_free(first);
+...
+392 }
+393 }
+
+Here, it is &first->info that is being passed on to copy_siginfo(). The
+variable "first" was found on a list -- passed in as the second argument to
+collect_signal(). We continue our journey through the stack, to figure out
+where the item on "list" was allocated or initialized. We move to line 410:
+
+395 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
+396 siginfo_t *info)
+397 {
+...
+410 collect_signal(sig, pending, info);
+...
+414 }
+
+Now we need to follow the "pending" pointer, since that is being passed on to
+collect_signal() as "list". At this point, we've run out of lines from the
+"addr2line" output. Not to worry, we just paste the next addresses from the
+kmemcheck stack dump, i.e.:
+
+ [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
+ [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
+ [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
+ [<ffffffff8100c7b5>] int_signal+0x12/0x17
+
+ $ addr2line -e vmlinux -i ffffffff8104f04e ffffffff81050bd8 \
+ ffffffff8100b87d ffffffff8100c7b5
+ kernel/signal.c:446
+ kernel/signal.c:1806
+ arch/x86/kernel/signal.c:805
+ arch/x86/kernel/signal.c:871
+ arch/x86/kernel/entry_64.S:694
+
+Remember that since these addresses were found on the stack and not as the
+RIP value, they actually point to the _next_ instruction (they are return
+addresses). This becomes obvious when we look at the code for line 446:
+
+422 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
+423 {
+...
+431 signr = __dequeue_signal(&tsk->signal->shared_pending,
+432 mask, info);
+433 /*
+434 * itimer signal ?
+435 *
+436 * itimers are process shared and we restart periodic
+437 * itimers in the signal delivery path to prevent DoS
+438 * attacks in the high resolution timer case. This is
+439 * compliant with the old way of self restarting
+440 * itimers, as the SIGALRM is a legacy signal and only
+441 * queued once. Changing the restart behaviour to
+442 * restart the timer in the signal dequeue path is
+443 * reducing the timer noise on heavy loaded !highres
+444 * systems too.
+445 */
+446 if (unlikely(signr == SIGALRM)) {
+...
+489 }
+
+So instead of looking at 446, we should be looking at 431, which is the line
+that executes just before 446. Here we see that what we are looking for is
+&tsk->signal->shared_pending.
+
+Our next task is now to figure out which function that puts items on this
+"shared_pending" list. A crude, but efficient tool, is git grep:
+
+ $ git grep -n 'shared_pending' kernel/
+ ...
+ kernel/signal.c:828: pending = group ? &t->signal->shared_pending : &t->pending;
+ kernel/signal.c:1339: pending = group ? &t->signal->shared_pending : &t->pending;
+ ...
+
+There were more results, but none of them were related to list operations,
+and these were the only assignments. We inspect the line numbers more closely
+and find that this is indeed where items are being added to the list:
+
+816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
+817 int group)
+818 {
+...
+828 pending = group ? &t->signal->shared_pending : &t->pending;
+...
+851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
+852 (is_si_special(info) ||
+853 info->si_code >= 0)));
+854 if (q) {
+855 list_add_tail(&q->list, &pending->list);
+...
+890 }
+
+and:
+
+1309 int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
+1310 {
+....
+1339 pending = group ? &t->signal->shared_pending : &t->pending;
+1340 list_add_tail(&q->list, &pending->list);
+....
+1347 }
+
+In the first case, the list element we are looking for, "q", is being returned
+from the function __sigqueue_alloc(), which looks like an allocation function.
+Let's take a look at it:
+
+187 static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags,
+188 int override_rlimit)
+189 {
+190 struct sigqueue *q = NULL;
+191 struct user_struct *user;
+192
+193 /*
+194 * We won't get problems with the target's UID changing under us
+195 * because changing it requires RCU be used, and if t != current, the
+196 * caller must be holding the RCU readlock (by way of a spinlock) and
+197 * we use RCU protection here
+198 */
+199 user = get_uid(__task_cred(t)->user);
+200 atomic_inc(&user->sigpending);
+201 if (override_rlimit ||
+202 atomic_read(&user->sigpending) <=
+203 t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
+204 q = kmem_cache_alloc(sigqueue_cachep, flags);
+205 if (unlikely(q == NULL)) {
+206 atomic_dec(&user->sigpending);
+207 free_uid(user);
+208 } else {
+209 INIT_LIST_HEAD(&q->list);
+210 q->flags = 0;
+211 q->user = user;
+212 }
+213
+214 return q;
+215 }
+
+We see that this function initializes q->list, q->flags, and q->user. It seems
+that now is the time to look at the definition of "struct sigqueue", e.g.:
+
+14 struct sigqueue {
+15 struct list_head list;
+16 int flags;
+17 siginfo_t info;
+18 struct user_struct *user;
+19 };
+
+And, you might remember, it was a memcpy() on &first->info that caused the
+warning, so this makes perfect sense. It also seems reasonable to assume that
+it is the caller of __sigqueue_alloc() that has the responsibility of filling
+out (initializing) this member.
+
+But just which fields of the struct were uninitialized? Let's look at
+kmemcheck's report again:
+
+WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
+80000000000000000000000000000000000000000088ffff0000000000000000
+ i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
+ ^
+
+These first two lines are the memory dump of the memory object itself, and the
+shadow bytemap, respectively. The memory object itself is in this case
+&first->info. Just beware that the start of this dump is NOT the start of the
+object itself! The position of the caret (^) corresponds with the address of
+the read (ffff88003e4a2024).
+
+The shadow bytemap dump legend is as follows:
+
+ i - initialized
+ u - uninitialized
+ a - unallocated (memory has been allocated by the slab layer, but has not
+ yet been handed off to anybody)
+ f - freed (memory has been allocated by the slab layer, but has been freed
+ by the previous owner)
+
+In order to figure out where (relative to the start of the object) the
+uninitialized memory was located, we have to look at the disassembly. For
+that, we'll need the RIP address again:
+
+RIP: 0010:[<ffffffff8104ede8>] [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
+
+ $ objdump -d --no-show-raw-insn vmlinux | grep -C 8 ffffffff8104ede8:
+ ffffffff8104edc8: mov %r8,0x8(%r8)
+ ffffffff8104edcc: test %r10d,%r10d
+ ffffffff8104edcf: js ffffffff8104ee88 <__dequeue_signal+0x168>
+ ffffffff8104edd5: mov %rax,%rdx
+ ffffffff8104edd8: mov $0xc,%ecx
+ ffffffff8104eddd: mov %r13,%rdi
+ ffffffff8104ede0: mov $0x30,%eax
+ ffffffff8104ede5: mov %rdx,%rsi
+ ffffffff8104ede8: rep movsl %ds:(%rsi),%es:(%rdi)
+ ffffffff8104edea: test $0x2,%al
+ ffffffff8104edec: je ffffffff8104edf0 <__dequeue_signal+0xd0>
+ ffffffff8104edee: movsw %ds:(%rsi),%es:(%rdi)
+ ffffffff8104edf0: test $0x1,%al
+ ffffffff8104edf2: je ffffffff8104edf5 <__dequeue_signal+0xd5>
+ ffffffff8104edf4: movsb %ds:(%rsi),%es:(%rdi)
+ ffffffff8104edf5: mov %r8,%rdi
+ ffffffff8104edf8: callq ffffffff8104de60 <__sigqueue_free>
+
+As expected, it's the "rep movsl" instruction from the memcpy() that causes
+the warning. We know about REP MOVSL that it uses the register RCX to count
+the number of remaining iterations. By taking a look at the register dump
+again (from the kmemcheck report), we can figure out how many bytes were left
+to copy:
+
+RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
+
+By looking at the disassembly, we also see that %ecx is being loaded with the
+value $0xc just before (ffffffff8104edd8), so we are very lucky. Keep in mind
+that this is the number of iterations, not bytes. And since this is a "long"
+operation, we need to multiply by 4 to get the number of bytes. So this means
+that the uninitialized value was encountered at 4 * (0xc - 0x9) = 12 bytes
+from the start of the object.
+
+We can now try to figure out which field of the "struct siginfo" that was not
+initialized. This is the beginning of the struct:
+
+40 typedef struct siginfo {
+41 int si_signo;
+42 int si_errno;
+43 int si_code;
+44
+45 union {
+..
+92 } _sifields;
+93 } siginfo_t;
+
+On 64-bit, the int is 4 bytes long, so it must the the union member that has
+not been initialized. We can verify this using gdb:
+
+ $ gdb vmlinux
+ ...
+ (gdb) p &((struct siginfo *) 0)->_sifields
+ $1 = (union {...} *) 0x10
+
+Actually, it seems that the union member is located at offset 0x10 -- which
+means that gcc has inserted 4 bytes of padding between the members si_code
+and _sifields. We can now get a fuller picture of the memory dump:
+
+ _----------------------------=> si_code
+ / _--------------------=> (padding)
+ | / _------------=> _sifields(._kill._pid)
+ | | / _----=> _sifields(._kill._uid)
+ | | | /
+-------|-------|-------|-------|
+80000000000000000000000000000000000000000088ffff0000000000000000
+ i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
+
+This allows us to realize another important fact: si_code contains the value
+0x80. Remember that x86 is little endian, so the first 4 bytes "80000000" are
+really the number 0x00000080. With a bit of research, we find that this is
+actually the constant SI_KERNEL defined in include/asm-generic/siginfo.h:
+
+144 #define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
+
+This macro is used in exactly one place in the x86 kernel: In send_signal()
+in kernel/signal.c:
+
+816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
+817 int group)
+818 {
+...
+828 pending = group ? &t->signal->shared_pending : &t->pending;
+...
+851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
+852 (is_si_special(info) ||
+853 info->si_code >= 0)));
+854 if (q) {
+855 list_add_tail(&q->list, &pending->list);
+856 switch ((unsigned long) info) {
+...
+865 case (unsigned long) SEND_SIG_PRIV:
+866 q->info.si_signo = sig;
+867 q->info.si_errno = 0;
+868 q->info.si_code = SI_KERNEL;
+869 q->info.si_pid = 0;
+870 q->info.si_uid = 0;
+871 break;
+...
+890 }
+
+Not only does this match with the .si_code member, it also matches the place
+we found earlier when looking for where siginfo_t objects are enqueued on the
+"shared_pending" list.
+
+So to sum up: It seems that it is the padding introduced by the compiler
+between two struct fields that is uninitialized, and this gets reported when
+we do a memcpy() on the struct. This means that we have identified a false
+positive warning.
+
+Normally, kmemcheck will not report uninitialized accesses in memcpy() calls
+when both the source and destination addresses are tracked. (Instead, we copy
+the shadow bytemap as well). In this case, the destination address clearly
+was not tracked. We can dig a little deeper into the stack trace from above:
+
+ arch/x86/kernel/signal.c:805
+ arch/x86/kernel/signal.c:871
+ arch/x86/kernel/entry_64.S:694
+
+And we clearly see that the destination siginfo object is located on the
+stack:
+
+782 static void do_signal(struct pt_regs *regs)
+783 {
+784 struct k_sigaction ka;
+785 siginfo_t info;
+...
+804 signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+...
+854 }
+
+And this &info is what eventually gets passed to copy_siginfo() as the
+destination argument.
+
+Now, even though we didn't find an actual error here, the example is still a
+good one, because it shows how one would go about to find out what the report
+was all about.
+
+
+3.4. Annotating false positives
+===============================
+
+There are a few different ways to make annotations in the source code that
+will keep kmemcheck from checking and reporting certain allocations. Here
+they are:
+
+ o __GFP_NOTRACK_FALSE_POSITIVE
+
+ This flag can be passed to kmalloc() or kmem_cache_alloc() (therefore
+ also to other functions that end up calling one of these) to indicate
+ that the allocation should not be tracked because it would lead to
+ a false positive report. This is a "big hammer" way of silencing
+ kmemcheck; after all, even if the false positive pertains to
+ particular field in a struct, for example, we will now lose the
+ ability to find (real) errors in other parts of the same struct.
+
+ Example:
+
+ /* No warnings will ever trigger on accessing any part of x */
+ x = kmalloc(sizeof *x, GFP_KERNEL | __GFP_NOTRACK_FALSE_POSITIVE);
+
+ o kmemcheck_bitfield_begin(name)/kmemcheck_bitfield_end(name) and
+ kmemcheck_annotate_bitfield(ptr, name)
+
+ The first two of these three macros can be used inside struct
+ definitions to signal, respectively, the beginning and end of a
+ bitfield. Additionally, this will assign the bitfield a name, which
+ is given as an argument to the macros.
+
+ Having used these markers, one can later use
+ kmemcheck_annotate_bitfield() at the point of allocation, to indicate
+ which parts of the allocation is part of a bitfield.
+
+ Example:
+
+ struct foo {
+ int x;
+
+ kmemcheck_bitfield_begin(flags);
+ int flag_a:1;
+ int flag_b:1;
+ kmemcheck_bitfield_end(flags);
+
+ int y;
+ };
+
+ struct foo *x = kmalloc(sizeof *x);
+
+ /* No warnings will trigger on accessing the bitfield of x */
+ kmemcheck_annotate_bitfield(x, flags);
+
+ Note that kmemcheck_annotate_bitfield() can be used even before the
+ return value of kmalloc() is checked -- in other words, passing NULL
+ as the first argument is legal (and will do nothing).
+
+
+4. Reporting errors
+===================
+
+As we have seen, kmemcheck will produce false positive reports. Therefore, it
+is not very wise to blindly post kmemcheck warnings to mailing lists and
+maintainers. Instead, I encourage maintainers and developers to find errors
+in their own code. If you get a warning, you can try to work around it, try
+to figure out if it's a real error or not, or simply ignore it. Most
+developers know their own code and will quickly and efficiently determine the
+root cause of a kmemcheck report. This is therefore also the most efficient
+way to work with kmemcheck.
+
+That said, we (the kmemcheck maintainers) will always be on the lookout for
+false positives that we can annotate and silence. So whatever you find,
+please drop us a note privately! Kernel configs and steps to reproduce (if
+available) are of course a great help too.
+
+Happy hacking!
+
+
+5. Technical description
+========================
+
+kmemcheck works by marking memory pages non-present. This means that whenever
+somebody attempts to access the page, a page fault is generated. The page
+fault handler notices that the page was in fact only hidden, and so it calls
+on the kmemcheck code to make further investigations.
+
+When the investigations are completed, kmemcheck "shows" the page by marking
+it present (as it would be under normal circumstances). This way, the
+interrupted code can continue as usual.
+
+But after the instruction has been executed, we should hide the page again, so
+that we can catch the next access too! Now kmemcheck makes use of a debugging
+feature of the processor, namely single-stepping. When the processor has
+finished the one instruction that generated the memory access, a debug
+exception is raised. From here, we simply hide the page again and continue
+execution, this time with the single-stepping feature turned off.
+
+kmemcheck requires some assistance from the memory allocator in order to work.
+The memory allocator needs to
+
+ 1. Tell kmemcheck about newly allocated pages and pages that are about to
+ be freed. This allows kmemcheck to set up and tear down the shadow memory
+ for the pages in question. The shadow memory stores the status of each
+ byte in the allocation proper, e.g. whether it is initialized or
+ uninitialized.
+
+ 2. Tell kmemcheck which parts of memory should be marked uninitialized.
+ There are actually a few more states, such as "not yet allocated" and
+ "recently freed".
+
+If a slab cache is set up using the SLAB_NOTRACK flag, it will never return
+memory that can take page faults because of kmemcheck.
+
+If a slab cache is NOT set up using the SLAB_NOTRACK flag, callers can still
+request memory with the __GFP_NOTRACK or __GFP_NOTRACK_FALSE_POSITIVE flags.
+This does not prevent the page faults from occurring, however, but marks the
+object in question as being initialized so that no warnings will ever be
+produced for this object.
+
+Currently, the SLAB and SLUB allocators are supported by kmemcheck.
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 1e7a769..053037a 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -507,9 +507,9 @@
Appendix A: The kprobes debugfs interface
With recent kernels (> 2.6.20) the list of registered kprobes is visible
-under the /debug/kprobes/ directory (assuming debugfs is mounted at /debug).
+under the /sys/kernel/debug/kprobes/ directory (assuming debugfs is mounted at //sys/kernel/debug).
-/debug/kprobes/list: Lists all registered probes on the system
+/sys/kernel/debug/kprobes/list: Lists all registered probes on the system
c015d71a k vfs_read+0x0
c011a316 j do_fork+0x0
@@ -525,7 +525,7 @@
such probes are marked with [GONE]. If the probe is temporarily disabled,
such probes are marked with [DISABLED].
-/debug/kprobes/enabled: Turn kprobes ON/OFF forcibly.
+/sys/kernel/debug/kprobes/enabled: Turn kprobes ON/OFF forcibly.
Provides a knob to globally and forcibly turn registered kprobes ON or OFF.
By default, all kprobes are enabled. By echoing "0" to this file, all
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 6fab2dc..c4de635 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -233,8 +233,8 @@
for page allocation or should be reclaimed.
In this example, if normal pages (index=2) are required to this DMA zone and
-pages_high is used for watermark, the kernel judges this zone should not be
-used because pages_free(1355) is smaller than watermark + protection[2]
+watermark[WMARK_HIGH] is used for watermark, the kernel judges this zone should
+not be used because pages_free(1355) is smaller than watermark + protection[2]
(4 + 2004 = 2008). If this protection value is 0, this zone would be used for
normal page requirement. If requirement is DMA zone(index=0), protection[0]
(=0) is used.
@@ -280,9 +280,10 @@
min_free_kbytes:
This is used to force the Linux VM to keep a minimum number
-of kilobytes free. The VM uses this number to compute a pages_min
-value for each lowmem zone in the system. Each lowmem zone gets
-a number of reserved free pages based proportionally on its size.
+of kilobytes free. The VM uses this number to compute a
+watermark[WMARK_MIN] value for each lowmem zone in the system.
+Each lowmem zone gets a number of reserved free pages based
+proportionally on its size.
Some minimal amount of memory is needed to satisfy PF_MEMALLOC
allocations; if you set this to lower than 1024KB, your system will
@@ -314,10 +315,14 @@
This is available only on NUMA kernels.
-A percentage of the total pages in each zone. Zone reclaim will only
-occur if more than this percentage of pages are file backed and unmapped.
-This is to insure that a minimal amount of local pages is still available for
-file I/O even if the node is overallocated.
+This is a percentage of the total pages in each zone. Zone reclaim will
+only occur if more than this percentage of pages are in a state that
+zone_reclaim_mode allows to be reclaimed.
+
+If zone_reclaim_mode has the value 4 OR'd, then the percentage is compared
+against all file-backed unmapped pages including swapcache pages and tmpfs
+files. Otherwise, only unmapped pages backed by normal files but not tmpfs
+files and similar are considered.
The default is 1 percent.
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index 7bd27f0..a39b3c7 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -7,7 +7,6 @@
(dual licensed under the GPL v2)
Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton,
John Kacur, and David Teigland.
-
Written for: 2.6.28-rc2
Introduction
@@ -33,13 +32,26 @@
Ftrace uses the debugfs file system to hold the control files as
well as the files to display output.
-To mount the debugfs system:
+When debugfs is configured into the kernel (which selecting any ftrace
+option will do) the directory /sys/kernel/debug will be created. To mount
+this directory, you can add to your /etc/fstab file:
- # mkdir /debug
- # mount -t debugfs nodev /debug
+ debugfs /sys/kernel/debug debugfs defaults 0 0
-( Note: it is more common to mount at /sys/kernel/debug, but for
- simplicity this document will use /debug)
+Or you can mount it at run time with:
+
+ mount -t debugfs nodev /sys/kernel/debug
+
+For quicker access to that directory you may want to make a soft link to
+it:
+
+ ln -s /sys/kernel/debug /debug
+
+Any selected ftrace option will also create a directory called tracing
+within the debugfs. The rest of the document will assume that you are in
+the ftrace directory (cd /sys/kernel/debug/tracing) and will only concentrate
+on the files within that directory and not distract from the content with
+the extended "/sys/kernel/debug/tracing" path name.
That's it! (assuming that you have ftrace configured into your kernel)
@@ -389,18 +401,18 @@
The trace_options file is used to control what gets printed in
the trace output. To see what is available, simply cat the file:
- cat /debug/tracing/trace_options
+ cat trace_options
print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \
noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj
To disable one of the options, echo in the option prepended with
"no".
- echo noprint-parent > /debug/tracing/trace_options
+ echo noprint-parent > trace_options
To enable an option, leave off the "no".
- echo sym-offset > /debug/tracing/trace_options
+ echo sym-offset > trace_options
Here are the available options:
@@ -476,11 +488,11 @@
This tracer simply records schedule switches. Here is an example
of how to use it.
- # echo sched_switch > /debug/tracing/current_tracer
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo sched_switch > current_tracer
+ # echo 1 > tracing_enabled
# sleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/trace
+ # echo 0 > tracing_enabled
+ # cat trace
# tracer: sched_switch
#
@@ -583,13 +595,13 @@
To reset the maximum, echo 0 into tracing_max_latency. Here is
an example:
- # echo irqsoff > /debug/tracing/current_tracer
- # echo 0 > /debug/tracing/tracing_max_latency
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo irqsoff > current_tracer
+ # echo 0 > tracing_max_latency
+ # echo 1 > tracing_enabled
# ls -ltr
[...]
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/latency_trace
+ # echo 0 > tracing_enabled
+ # cat latency_trace
# tracer: irqsoff
#
irqsoff latency trace v1.1.5 on 2.6.26
@@ -690,13 +702,13 @@
which preemption was disabled. The control of preemptoff tracer
is much like the irqsoff tracer.
- # echo preemptoff > /debug/tracing/current_tracer
- # echo 0 > /debug/tracing/tracing_max_latency
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo preemptoff > current_tracer
+ # echo 0 > tracing_max_latency
+ # echo 1 > tracing_enabled
# ls -ltr
[...]
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/latency_trace
+ # echo 0 > tracing_enabled
+ # cat latency_trace
# tracer: preemptoff
#
preemptoff latency trace v1.1.5 on 2.6.26-rc8
@@ -837,13 +849,13 @@
Again, using this trace is much like the irqsoff and preemptoff
tracers.
- # echo preemptirqsoff > /debug/tracing/current_tracer
- # echo 0 > /debug/tracing/tracing_max_latency
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo preemptirqsoff > current_tracer
+ # echo 0 > tracing_max_latency
+ # echo 1 > tracing_enabled
# ls -ltr
[...]
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/latency_trace
+ # echo 0 > tracing_enabled
+ # cat latency_trace
# tracer: preemptirqsoff
#
preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
@@ -999,12 +1011,12 @@
Instead of performing an 'ls', we will run 'sleep 1' under
'chrt' which changes the priority of the task.
- # echo wakeup > /debug/tracing/current_tracer
- # echo 0 > /debug/tracing/tracing_max_latency
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo wakeup > current_tracer
+ # echo 0 > tracing_max_latency
+ # echo 1 > tracing_enabled
# chrt -f 5 sleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/latency_trace
+ # echo 0 > tracing_enabled
+ # cat latency_trace
# tracer: wakeup
#
wakeup latency trace v1.1.5 on 2.6.26-rc8
@@ -1114,11 +1126,11 @@
ftrace_enabled is set; otherwise this tracer is a nop.
# sysctl kernel.ftrace_enabled=1
- # echo function > /debug/tracing/current_tracer
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo function > current_tracer
+ # echo 1 > tracing_enabled
# usleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/trace
+ # echo 0 > tracing_enabled
+ # cat trace
# tracer: function
#
# TASK-PID CPU# TIMESTAMP FUNCTION
@@ -1155,7 +1167,7 @@
[...]
int main(int argc, char *argv[]) {
[...]
- trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY);
+ trace_fd = open(tracing_file("tracing_enabled"), O_WRONLY);
[...]
if (condition_hit()) {
write(trace_fd, "0", 1);
@@ -1163,26 +1175,20 @@
[...]
}
-Note: Here we hard coded the path name. The debugfs mount is not
-guaranteed to be at /debug (and is more commonly at
-/sys/kernel/debug). For simple one time traces, the above is
-sufficent. For anything else, a search through /proc/mounts may
-be needed to find where the debugfs file-system is mounted.
-
Single thread tracing
---------------------
-By writing into /debug/tracing/set_ftrace_pid you can trace a
+By writing into set_ftrace_pid you can trace a
single thread. For example:
-# cat /debug/tracing/set_ftrace_pid
+# cat set_ftrace_pid
no pid
-# echo 3111 > /debug/tracing/set_ftrace_pid
-# cat /debug/tracing/set_ftrace_pid
+# echo 3111 > set_ftrace_pid
+# cat set_ftrace_pid
3111
-# echo function > /debug/tracing/current_tracer
-# cat /debug/tracing/trace | head
+# echo function > current_tracer
+# cat trace | head
# tracer: function
#
# TASK-PID CPU# TIMESTAMP FUNCTION
@@ -1193,8 +1199,8 @@
yum-updatesd-3111 [003] 1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel
yum-updatesd-3111 [003] 1637.254685: fget_light <-do_sys_poll
yum-updatesd-3111 [003] 1637.254686: pipe_poll <-do_sys_poll
-# echo -1 > /debug/tracing/set_ftrace_pid
-# cat /debug/tracing/trace |head
+# echo -1 > set_ftrace_pid
+# cat trace |head
# tracer: function
#
# TASK-PID CPU# TIMESTAMP FUNCTION
@@ -1216,6 +1222,51 @@
#include <fcntl.h>
#include <unistd.h>
+#define _STR(x) #x
+#define STR(x) _STR(x)
+#define MAX_PATH 256
+
+const char *find_debugfs(void)
+{
+ static char debugfs[MAX_PATH+1];
+ static int debugfs_found;
+ char type[100];
+ FILE *fp;
+
+ if (debugfs_found)
+ return debugfs;
+
+ if ((fp = fopen("/proc/mounts","r")) == NULL) {
+ perror("/proc/mounts");
+ return NULL;
+ }
+
+ while (fscanf(fp, "%*s %"
+ STR(MAX_PATH)
+ "s %99s %*s %*d %*d\n",
+ debugfs, type) == 2) {
+ if (strcmp(type, "debugfs") == 0)
+ break;
+ }
+ fclose(fp);
+
+ if (strcmp(type, "debugfs") != 0) {
+ fprintf(stderr, "debugfs not mounted");
+ return NULL;
+ }
+
+ debugfs_found = 1;
+
+ return debugfs;
+}
+
+const char *tracing_file(const char *file_name)
+{
+ static char trace_file[MAX_PATH+1];
+ snprintf(trace_file, MAX_PATH, "%s/%s", find_debugfs(), file_name);
+ return trace_file;
+}
+
int main (int argc, char **argv)
{
if (argc < 1)
@@ -1226,12 +1277,12 @@
char line[64];
int s;
- ffd = open("/debug/tracing/current_tracer", O_WRONLY);
+ ffd = open(tracing_file("current_tracer"), O_WRONLY);
if (ffd < 0)
exit(-1);
write(ffd, "nop", 3);
- fd = open("/debug/tracing/set_ftrace_pid", O_WRONLY);
+ fd = open(tracing_file("set_ftrace_pid"), O_WRONLY);
s = sprintf(line, "%d\n", getpid());
write(fd, line, s);
@@ -1383,22 +1434,22 @@
tracing_cpu_mask file) or you might sometimes see unordered
function calls while cpu tracing switch.
- hide: echo nofuncgraph-cpu > /debug/tracing/trace_options
- show: echo funcgraph-cpu > /debug/tracing/trace_options
+ hide: echo nofuncgraph-cpu > trace_options
+ show: echo funcgraph-cpu > trace_options
- The duration (function's time of execution) is displayed on
the closing bracket line of a function or on the same line
than the current function in case of a leaf one. It is default
enabled.
- hide: echo nofuncgraph-duration > /debug/tracing/trace_options
- show: echo funcgraph-duration > /debug/tracing/trace_options
+ hide: echo nofuncgraph-duration > trace_options
+ show: echo funcgraph-duration > trace_options
- The overhead field precedes the duration field in case of
reached duration thresholds.
- hide: echo nofuncgraph-overhead > /debug/tracing/trace_options
- show: echo funcgraph-overhead > /debug/tracing/trace_options
+ hide: echo nofuncgraph-overhead > trace_options
+ show: echo funcgraph-overhead > trace_options
depends on: funcgraph-duration
ie:
@@ -1427,8 +1478,8 @@
- The task/pid field displays the thread cmdline and pid which
executed the function. It is default disabled.
- hide: echo nofuncgraph-proc > /debug/tracing/trace_options
- show: echo funcgraph-proc > /debug/tracing/trace_options
+ hide: echo nofuncgraph-proc > trace_options
+ show: echo funcgraph-proc > trace_options
ie:
@@ -1451,8 +1502,8 @@
system clock since it started. A snapshot of this time is
given on each entry/exit of functions
- hide: echo nofuncgraph-abstime > /debug/tracing/trace_options
- show: echo funcgraph-abstime > /debug/tracing/trace_options
+ hide: echo nofuncgraph-abstime > trace_options
+ show: echo funcgraph-abstime > trace_options
ie:
@@ -1549,7 +1600,7 @@
available_filter_functions
- # cat /debug/tracing/available_filter_functions
+ # cat available_filter_functions
put_prev_task_idle
kmem_cache_create
pick_next_task_rt
@@ -1561,12 +1612,12 @@
If I am only interested in sys_nanosleep and hrtimer_interrupt:
# echo sys_nanosleep hrtimer_interrupt \
- > /debug/tracing/set_ftrace_filter
- # echo ftrace > /debug/tracing/current_tracer
- # echo 1 > /debug/tracing/tracing_enabled
+ > set_ftrace_filter
+ # echo ftrace > current_tracer
+ # echo 1 > tracing_enabled
# usleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/trace
+ # echo 0 > tracing_enabled
+ # cat trace
# tracer: ftrace
#
# TASK-PID CPU# TIMESTAMP FUNCTION
@@ -1577,7 +1628,7 @@
To see which functions are being traced, you can cat the file:
- # cat /debug/tracing/set_ftrace_filter
+ # cat set_ftrace_filter
hrtimer_interrupt
sys_nanosleep
@@ -1597,7 +1648,7 @@
otherwise the shell may expand the parameters into names
of files in the local directory.
- # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter
+ # echo 'hrtimer_*' > set_ftrace_filter
Produces:
@@ -1618,7 +1669,7 @@
Notice that we lost the sys_nanosleep.
- # cat /debug/tracing/set_ftrace_filter
+ # cat set_ftrace_filter
hrtimer_run_queues
hrtimer_run_pending
hrtimer_init
@@ -1644,17 +1695,17 @@
To clear out a filter so that all functions will be recorded
again:
- # echo > /debug/tracing/set_ftrace_filter
- # cat /debug/tracing/set_ftrace_filter
+ # echo > set_ftrace_filter
+ # cat set_ftrace_filter
#
Again, now we want to append.
- # echo sys_nanosleep > /debug/tracing/set_ftrace_filter
- # cat /debug/tracing/set_ftrace_filter
+ # echo sys_nanosleep > set_ftrace_filter
+ # cat set_ftrace_filter
sys_nanosleep
- # echo 'hrtimer_*' >> /debug/tracing/set_ftrace_filter
- # cat /debug/tracing/set_ftrace_filter
+ # echo 'hrtimer_*' >> set_ftrace_filter
+ # cat set_ftrace_filter
hrtimer_run_queues
hrtimer_run_pending
hrtimer_init
@@ -1677,7 +1728,7 @@
The set_ftrace_notrace prevents those functions from being
traced.
- # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace
+ # echo '*preempt*' '*lock*' > set_ftrace_notrace
Produces:
@@ -1767,13 +1818,13 @@
trace_pipe is consumed. This means that subsequent reads will be
different. The trace is live.
- # echo function > /debug/tracing/current_tracer
- # cat /debug/tracing/trace_pipe > /tmp/trace.out &
+ # echo function > current_tracer
+ # cat trace_pipe > /tmp/trace.out &
[1] 4153
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo 1 > tracing_enabled
# usleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/trace
+ # echo 0 > tracing_enabled
+ # cat trace
# tracer: function
#
# TASK-PID CPU# TIMESTAMP FUNCTION
@@ -1809,7 +1860,7 @@
CPU. To know the full size, multiply the number of possible CPUS
with the number of entries.
- # cat /debug/tracing/buffer_size_kb
+ # cat buffer_size_kb
1408 (units kilobytes)
Note, to modify this, you must have tracing completely disabled.
@@ -1817,18 +1868,18 @@
current_tracer is not set to "nop", an EINVAL error will be
returned.
- # echo nop > /debug/tracing/current_tracer
- # echo 10000 > /debug/tracing/buffer_size_kb
- # cat /debug/tracing/buffer_size_kb
+ # echo nop > current_tracer
+ # echo 10000 > buffer_size_kb
+ # cat buffer_size_kb
10000 (units kilobytes)
The number of pages which will be allocated is limited to a
percentage of available memory. Allocating too much will produce
an error.
- # echo 1000000000000 > /debug/tracing/buffer_size_kb
+ # echo 1000000000000 > buffer_size_kb
-bash: echo: write error: Cannot allocate memory
- # cat /debug/tracing/buffer_size_kb
+ # cat buffer_size_kb
85
-----------
diff --git a/Documentation/trace/mmiotrace.txt b/Documentation/trace/mmiotrace.txt
index 5731c67..162effb 100644
--- a/Documentation/trace/mmiotrace.txt
+++ b/Documentation/trace/mmiotrace.txt
@@ -32,41 +32,41 @@
Usage Quick Reference
---------------------
-$ mount -t debugfs debugfs /debug
-$ echo mmiotrace > /debug/tracing/current_tracer
-$ cat /debug/tracing/trace_pipe > mydump.txt &
+$ mount -t debugfs debugfs /sys/kernel/debug
+$ echo mmiotrace > /sys/kernel/debug/tracing/current_tracer
+$ cat /sys/kernel/debug/tracing/trace_pipe > mydump.txt &
Start X or whatever.
-$ echo "X is up" > /debug/tracing/trace_marker
-$ echo nop > /debug/tracing/current_tracer
+$ echo "X is up" > /sys/kernel/debug/tracing/trace_marker
+$ echo nop > /sys/kernel/debug/tracing/current_tracer
Check for lost events.
Usage
-----
-Make sure debugfs is mounted to /debug. If not, (requires root privileges)
-$ mount -t debugfs debugfs /debug
+Make sure debugfs is mounted to /sys/kernel/debug. If not, (requires root privileges)
+$ mount -t debugfs debugfs /sys/kernel/debug
Check that the driver you are about to trace is not loaded.
Activate mmiotrace (requires root privileges):
-$ echo mmiotrace > /debug/tracing/current_tracer
+$ echo mmiotrace > /sys/kernel/debug/tracing/current_tracer
Start storing the trace:
-$ cat /debug/tracing/trace_pipe > mydump.txt &
+$ cat /sys/kernel/debug/tracing/trace_pipe > mydump.txt &
The 'cat' process should stay running (sleeping) in the background.
Load the driver you want to trace and use it. Mmiotrace will only catch MMIO
accesses to areas that are ioremapped while mmiotrace is active.
During tracing you can place comments (markers) into the trace by
-$ echo "X is up" > /debug/tracing/trace_marker
+$ echo "X is up" > /sys/kernel/debug/tracing/trace_marker
This makes it easier to see which part of the (huge) trace corresponds to
which action. It is recommended to place descriptive markers about what you
do.
Shut down mmiotrace (requires root privileges):
-$ echo nop > /debug/tracing/current_tracer
+$ echo nop > /sys/kernel/debug/tracing/current_tracer
The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
pressing ctrl+c.
@@ -78,10 +78,10 @@
events were lost, the trace is incomplete. You should enlarge the buffers and
try again. Buffers are enlarged by first seeing how large the current buffers
are:
-$ cat /debug/tracing/buffer_size_kb
+$ cat /sys/kernel/debug/tracing/buffer_size_kb
gives you a number. Approximately double this number and write it back, for
instance:
-$ echo 128000 > /debug/tracing/buffer_size_kb
+$ echo 128000 > /sys/kernel/debug/tracing/buffer_size_kb
Then start again from the top.
If you are doing a trace for a driver project, e.g. Nouveau, you should also
diff --git a/Documentation/vm/Makefile b/Documentation/vm/Makefile
index 6f562f7..27479d4 100644
--- a/Documentation/vm/Makefile
+++ b/Documentation/vm/Makefile
@@ -2,7 +2,7 @@
obj- := dummy.o
# List of programs to build
-hostprogs-y := slabinfo
+hostprogs-y := slabinfo slqbinfo page-types
# Tell kbuild to always build the programs
always := $(hostprogs-y)
diff --git a/Documentation/vm/balance b/Documentation/vm/balance
index bd3d31b..c46e68c 100644
--- a/Documentation/vm/balance
+++ b/Documentation/vm/balance
@@ -75,15 +75,15 @@
alleviate memory pressure on any zone in the page's node that has fallen below
its watermark.
-pages_min/pages_low/pages_high/low_on_memory/zone_wake_kswapd: These are
-per-zone fields, used to determine when a zone needs to be balanced. When
-the number of pages falls below pages_min, the hysteric field low_on_memory
-gets set. This stays set till the number of free pages becomes pages_high.
-When low_on_memory is set, page allocation requests will try to free some
-pages in the zone (providing GFP_WAIT is set in the request). Orthogonal
-to this, is the decision to poke kswapd to free some zone pages. That
-decision is not hysteresis based, and is done when the number of free
-pages is below pages_low; in which case zone_wake_kswapd is also set.
+watemark[WMARK_MIN/WMARK_LOW/WMARK_HIGH]/low_on_memory/zone_wake_kswapd: These
+are per-zone fields, used to determine when a zone needs to be balanced. When
+the number of pages falls below watermark[WMARK_MIN], the hysteric field
+low_on_memory gets set. This stays set till the number of free pages becomes
+watermark[WMARK_HIGH]. When low_on_memory is set, page allocation requests will
+try to free some pages in the zone (providing GFP_WAIT is set in the request).
+Orthogonal to this, is the decision to poke kswapd to free some zone pages.
+That decision is not hysteresis based, and is done when the number of free
+pages is below watermark[WMARK_LOW]; in which case zone_wake_kswapd is also set.
(Good) Ideas that I have heard:
diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c
new file mode 100644
index 0000000..0833f44
--- /dev/null
+++ b/Documentation/vm/page-types.c
@@ -0,0 +1,698 @@
+/*
+ * page-types: Tool for querying page flags
+ *
+ * Copyright (C) 2009 Intel corporation
+ * Copyright (C) 2009 Wu Fengguang <fengguang.wu@intel.com>
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <string.h>
+#include <getopt.h>
+#include <limits.h>
+#include <sys/types.h>
+#include <sys/errno.h>
+#include <sys/fcntl.h>
+
+
+/*
+ * kernel page flags
+ */
+
+#define KPF_BYTES 8
+#define PROC_KPAGEFLAGS "/proc/kpageflags"
+
+/* copied from kpageflags_read() */
+#define KPF_LOCKED 0
+#define KPF_ERROR 1
+#define KPF_REFERENCED 2
+#define KPF_UPTODATE 3
+#define KPF_DIRTY 4
+#define KPF_LRU 5
+#define KPF_ACTIVE 6
+#define KPF_SLAB 7
+#define KPF_WRITEBACK 8
+#define KPF_RECLAIM 9
+#define KPF_BUDDY 10
+
+/* [11-20] new additions in 2.6.31 */
+#define KPF_MMAP 11
+#define KPF_ANON 12
+#define KPF_SWAPCACHE 13
+#define KPF_SWAPBACKED 14
+#define KPF_COMPOUND_HEAD 15
+#define KPF_COMPOUND_TAIL 16
+#define KPF_HUGE 17
+#define KPF_UNEVICTABLE 18
+#define KPF_NOPAGE 20
+
+/* [32-] kernel hacking assistances */
+#define KPF_RESERVED 32
+#define KPF_MLOCKED 33
+#define KPF_MAPPEDTODISK 34
+#define KPF_PRIVATE 35
+#define KPF_PRIVATE_2 36
+#define KPF_OWNER_PRIVATE 37
+#define KPF_ARCH 38
+#define KPF_UNCACHED 39
+
+/* [48-] take some arbitrary free slots for expanding overloaded flags
+ * not part of kernel API
+ */
+#define KPF_READAHEAD 48
+#define KPF_SLOB_FREE 49
+#define KPF_SLUB_FROZEN 50
+#define KPF_SLUB_DEBUG 51
+
+#define KPF_ALL_BITS ((uint64_t)~0ULL)
+#define KPF_HACKERS_BITS (0xffffULL << 32)
+#define KPF_OVERLOADED_BITS (0xffffULL << 48)
+#define BIT(name) (1ULL << KPF_##name)
+#define BITS_COMPOUND (BIT(COMPOUND_HEAD) | BIT(COMPOUND_TAIL))
+
+static char *page_flag_names[] = {
+ [KPF_LOCKED] = "L:locked",
+ [KPF_ERROR] = "E:error",
+ [KPF_REFERENCED] = "R:referenced",
+ [KPF_UPTODATE] = "U:uptodate",
+ [KPF_DIRTY] = "D:dirty",
+ [KPF_LRU] = "l:lru",
+ [KPF_ACTIVE] = "A:active",
+ [KPF_SLAB] = "S:slab",
+ [KPF_WRITEBACK] = "W:writeback",
+ [KPF_RECLAIM] = "I:reclaim",
+ [KPF_BUDDY] = "B:buddy",
+
+ [KPF_MMAP] = "M:mmap",
+ [KPF_ANON] = "a:anonymous",
+ [KPF_SWAPCACHE] = "s:swapcache",
+ [KPF_SWAPBACKED] = "b:swapbacked",
+ [KPF_COMPOUND_HEAD] = "H:compound_head",
+ [KPF_COMPOUND_TAIL] = "T:compound_tail",
+ [KPF_HUGE] = "G:huge",
+ [KPF_UNEVICTABLE] = "u:unevictable",
+ [KPF_NOPAGE] = "n:nopage",
+
+ [KPF_RESERVED] = "r:reserved",
+ [KPF_MLOCKED] = "m:mlocked",
+ [KPF_MAPPEDTODISK] = "d:mappedtodisk",
+ [KPF_PRIVATE] = "P:private",
+ [KPF_PRIVATE_2] = "p:private_2",
+ [KPF_OWNER_PRIVATE] = "O:owner_private",
+ [KPF_ARCH] = "h:arch",
+ [KPF_UNCACHED] = "c:uncached",
+
+ [KPF_READAHEAD] = "I:readahead",
+ [KPF_SLOB_FREE] = "P:slob_free",
+ [KPF_SLUB_FROZEN] = "A:slub_frozen",
+ [KPF_SLUB_DEBUG] = "E:slub_debug",
+};
+
+
+/*
+ * data structures
+ */
+
+static int opt_raw; /* for kernel developers */
+static int opt_list; /* list pages (in ranges) */
+static int opt_no_summary; /* don't show summary */
+static pid_t opt_pid; /* process to walk */
+
+#define MAX_ADDR_RANGES 1024
+static int nr_addr_ranges;
+static unsigned long opt_offset[MAX_ADDR_RANGES];
+static unsigned long opt_size[MAX_ADDR_RANGES];
+
+#define MAX_BIT_FILTERS 64
+static int nr_bit_filters;
+static uint64_t opt_mask[MAX_BIT_FILTERS];
+static uint64_t opt_bits[MAX_BIT_FILTERS];
+
+static int page_size;
+
+#define PAGES_BATCH (64 << 10) /* 64k pages */
+static int kpageflags_fd;
+static uint64_t kpageflags_buf[KPF_BYTES * PAGES_BATCH];
+
+#define HASH_SHIFT 13
+#define HASH_SIZE (1 << HASH_SHIFT)
+#define HASH_MASK (HASH_SIZE - 1)
+#define HASH_KEY(flags) (flags & HASH_MASK)
+
+static unsigned long total_pages;
+static unsigned long nr_pages[HASH_SIZE];
+static uint64_t page_flags[HASH_SIZE];
+
+
+/*
+ * helper functions
+ */
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+#define min_t(type, x, y) ({ \
+ type __min1 = (x); \
+ type __min2 = (y); \
+ __min1 < __min2 ? __min1 : __min2; })
+
+unsigned long pages2mb(unsigned long pages)
+{
+ return (pages * page_size) >> 20;
+}
+
+void fatal(const char *x, ...)
+{
+ va_list ap;
+
+ va_start(ap, x);
+ vfprintf(stderr, x, ap);
+ va_end(ap);
+ exit(EXIT_FAILURE);
+}
+
+
+/*
+ * page flag names
+ */
+
+char *page_flag_name(uint64_t flags)
+{
+ static char buf[65];
+ int present;
+ int i, j;
+
+ for (i = 0, j = 0; i < ARRAY_SIZE(page_flag_names); i++) {
+ present = (flags >> i) & 1;
+ if (!page_flag_names[i]) {
+ if (present)
+ fatal("unkown flag bit %d\n", i);
+ continue;
+ }
+ buf[j++] = present ? page_flag_names[i][0] : '_';
+ }
+
+ return buf;
+}
+
+char *page_flag_longname(uint64_t flags)
+{
+ static char buf[1024];
+ int i, n;
+
+ for (i = 0, n = 0; i < ARRAY_SIZE(page_flag_names); i++) {
+ if (!page_flag_names[i])
+ continue;
+ if ((flags >> i) & 1)
+ n += snprintf(buf + n, sizeof(buf) - n, "%s,",
+ page_flag_names[i] + 2);
+ }
+ if (n)
+ n--;
+ buf[n] = '\0';
+
+ return buf;
+}
+
+
+/*
+ * page list and summary
+ */
+
+void show_page_range(unsigned long offset, uint64_t flags)
+{
+ static uint64_t flags0;
+ static unsigned long index;
+ static unsigned long count;
+
+ if (flags == flags0 && offset == index + count) {
+ count++;
+ return;
+ }
+
+ if (count)
+ printf("%lu\t%lu\t%s\n",
+ index, count, page_flag_name(flags0));
+
+ flags0 = flags;
+ index = offset;
+ count = 1;
+}
+
+void show_page(unsigned long offset, uint64_t flags)
+{
+ printf("%lu\t%s\n", offset, page_flag_name(flags));
+}
+
+void show_summary(void)
+{
+ int i;
+
+ printf(" flags\tpage-count MB"
+ " symbolic-flags\t\t\tlong-symbolic-flags\n");
+
+ for (i = 0; i < ARRAY_SIZE(nr_pages); i++) {
+ if (nr_pages[i])
+ printf("0x%016llx\t%10lu %8lu %s\t%s\n",
+ (unsigned long long)page_flags[i],
+ nr_pages[i],
+ pages2mb(nr_pages[i]),
+ page_flag_name(page_flags[i]),
+ page_flag_longname(page_flags[i]));
+ }
+
+ printf(" total\t%10lu %8lu\n",
+ total_pages, pages2mb(total_pages));
+}
+
+
+/*
+ * page flag filters
+ */
+
+int bit_mask_ok(uint64_t flags)
+{
+ int i;
+
+ for (i = 0; i < nr_bit_filters; i++) {
+ if (opt_bits[i] == KPF_ALL_BITS) {
+ if ((flags & opt_mask[i]) == 0)
+ return 0;
+ } else {
+ if ((flags & opt_mask[i]) != opt_bits[i])
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+uint64_t expand_overloaded_flags(uint64_t flags)
+{
+ /* SLOB/SLUB overload several page flags */
+ if (flags & BIT(SLAB)) {
+ if (flags & BIT(PRIVATE))
+ flags ^= BIT(PRIVATE) | BIT(SLOB_FREE);
+ if (flags & BIT(ACTIVE))
+ flags ^= BIT(ACTIVE) | BIT(SLUB_FROZEN);
+ if (flags & BIT(ERROR))
+ flags ^= BIT(ERROR) | BIT(SLUB_DEBUG);
+ }
+
+ /* PG_reclaim is overloaded as PG_readahead in the read path */
+ if ((flags & (BIT(RECLAIM) | BIT(WRITEBACK))) == BIT(RECLAIM))
+ flags ^= BIT(RECLAIM) | BIT(READAHEAD);
+
+ return flags;
+}
+
+uint64_t well_known_flags(uint64_t flags)
+{
+ /* hide flags intended only for kernel hacker */
+ flags &= ~KPF_HACKERS_BITS;
+
+ /* hide non-hugeTLB compound pages */
+ if ((flags & BITS_COMPOUND) && !(flags & BIT(HUGE)))
+ flags &= ~BITS_COMPOUND;
+
+ return flags;
+}
+
+
+/*
+ * page frame walker
+ */
+
+int hash_slot(uint64_t flags)
+{
+ int k = HASH_KEY(flags);
+ int i;
+
+ /* Explicitly reserve slot 0 for flags 0: the following logic
+ * cannot distinguish an unoccupied slot from slot (flags==0).
+ */
+ if (flags == 0)
+ return 0;
+
+ /* search through the remaining (HASH_SIZE-1) slots */
+ for (i = 1; i < ARRAY_SIZE(page_flags); i++, k++) {
+ if (!k || k >= ARRAY_SIZE(page_flags))
+ k = 1;
+ if (page_flags[k] == 0) {
+ page_flags[k] = flags;
+ return k;
+ }
+ if (page_flags[k] == flags)
+ return k;
+ }
+
+ fatal("hash table full: bump up HASH_SHIFT?\n");
+ exit(EXIT_FAILURE);
+}
+
+void add_page(unsigned long offset, uint64_t flags)
+{
+ flags = expand_overloaded_flags(flags);
+
+ if (!opt_raw)
+ flags = well_known_flags(flags);
+
+ if (!bit_mask_ok(flags))
+ return;
+
+ if (opt_list == 1)
+ show_page_range(offset, flags);
+ else if (opt_list == 2)
+ show_page(offset, flags);
+
+ nr_pages[hash_slot(flags)]++;
+ total_pages++;
+}
+
+void walk_pfn(unsigned long index, unsigned long count)
+{
+ unsigned long batch;
+ unsigned long n;
+ unsigned long i;
+
+ if (index > ULONG_MAX / KPF_BYTES)
+ fatal("index overflow: %lu\n", index);
+
+ lseek(kpageflags_fd, index * KPF_BYTES, SEEK_SET);
+
+ while (count) {
+ batch = min_t(unsigned long, count, PAGES_BATCH);
+ n = read(kpageflags_fd, kpageflags_buf, batch * KPF_BYTES);
+ if (n == 0)
+ break;
+ if (n < 0) {
+ perror(PROC_KPAGEFLAGS);
+ exit(EXIT_FAILURE);
+ }
+
+ if (n % KPF_BYTES != 0)
+ fatal("partial read: %lu bytes\n", n);
+ n = n / KPF_BYTES;
+
+ for (i = 0; i < n; i++)
+ add_page(index + i, kpageflags_buf[i]);
+
+ index += batch;
+ count -= batch;
+ }
+}
+
+void walk_addr_ranges(void)
+{
+ int i;
+
+ kpageflags_fd = open(PROC_KPAGEFLAGS, O_RDONLY);
+ if (kpageflags_fd < 0) {
+ perror(PROC_KPAGEFLAGS);
+ exit(EXIT_FAILURE);
+ }
+
+ if (!nr_addr_ranges)
+ walk_pfn(0, ULONG_MAX);
+
+ for (i = 0; i < nr_addr_ranges; i++)
+ walk_pfn(opt_offset[i], opt_size[i]);
+
+ close(kpageflags_fd);
+}
+
+
+/*
+ * user interface
+ */
+
+const char *page_flag_type(uint64_t flag)
+{
+ if (flag & KPF_HACKERS_BITS)
+ return "(r)";
+ if (flag & KPF_OVERLOADED_BITS)
+ return "(o)";
+ return " ";
+}
+
+void usage(void)
+{
+ int i, j;
+
+ printf(
+"page-types [options]\n"
+" -r|--raw Raw mode, for kernel developers\n"
+" -a|--addr addr-spec Walk a range of pages\n"
+" -b|--bits bits-spec Walk pages with specified bits\n"
+#if 0 /* planned features */
+" -p|--pid pid Walk process address space\n"
+" -f|--file filename Walk file address space\n"
+#endif
+" -l|--list Show page details in ranges\n"
+" -L|--list-each Show page details one by one\n"
+" -N|--no-summary Don't show summay info\n"
+" -h|--help Show this usage message\n"
+"addr-spec:\n"
+" N one page at offset N (unit: pages)\n"
+" N+M pages range from N to N+M-1\n"
+" N,M pages range from N to M-1\n"
+" N, pages range from N to end\n"
+" ,M pages range from 0 to M\n"
+"bits-spec:\n"
+" bit1,bit2 (flags & (bit1|bit2)) != 0\n"
+" bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1\n"
+" bit1,~bit2 (flags & (bit1|bit2)) == bit1\n"
+" =bit1,bit2 flags == (bit1|bit2)\n"
+"bit-names:\n"
+ );
+
+ for (i = 0, j = 0; i < ARRAY_SIZE(page_flag_names); i++) {
+ if (!page_flag_names[i])
+ continue;
+ printf("%16s%s", page_flag_names[i] + 2,
+ page_flag_type(1ULL << i));
+ if (++j > 3) {
+ j = 0;
+ putchar('\n');
+ }
+ }
+ printf("\n "
+ "(r) raw mode bits (o) overloaded bits\n");
+}
+
+unsigned long long parse_number(const char *str)
+{
+ unsigned long long n;
+
+ n = strtoll(str, NULL, 0);
+
+ if (n == 0 && str[0] != '0')
+ fatal("invalid name or number: %s\n", str);
+
+ return n;
+}
+
+void parse_pid(const char *str)
+{
+ opt_pid = parse_number(str);
+}
+
+void parse_file(const char *name)
+{
+}
+
+void add_addr_range(unsigned long offset, unsigned long size)
+{
+ if (nr_addr_ranges >= MAX_ADDR_RANGES)
+ fatal("too much addr ranges\n");
+
+ opt_offset[nr_addr_ranges] = offset;
+ opt_size[nr_addr_ranges] = size;
+ nr_addr_ranges++;
+}
+
+void parse_addr_range(const char *optarg)
+{
+ unsigned long offset;
+ unsigned long size;
+ char *p;
+
+ p = strchr(optarg, ',');
+ if (!p)
+ p = strchr(optarg, '+');
+
+ if (p == optarg) {
+ offset = 0;
+ size = parse_number(p + 1);
+ } else if (p) {
+ offset = parse_number(optarg);
+ if (p[1] == '\0')
+ size = ULONG_MAX;
+ else {
+ size = parse_number(p + 1);
+ if (*p == ',') {
+ if (size < offset)
+ fatal("invalid range: %lu,%lu\n",
+ offset, size);
+ size -= offset;
+ }
+ }
+ } else {
+ offset = parse_number(optarg);
+ size = 1;
+ }
+
+ add_addr_range(offset, size);
+}
+
+void add_bits_filter(uint64_t mask, uint64_t bits)
+{
+ if (nr_bit_filters >= MAX_BIT_FILTERS)
+ fatal("too much bit filters\n");
+
+ opt_mask[nr_bit_filters] = mask;
+ opt_bits[nr_bit_filters] = bits;
+ nr_bit_filters++;
+}
+
+uint64_t parse_flag_name(const char *str, int len)
+{
+ int i;
+
+ if (!*str || !len)
+ return 0;
+
+ if (len <= 8 && !strncmp(str, "compound", len))
+ return BITS_COMPOUND;
+
+ for (i = 0; i < ARRAY_SIZE(page_flag_names); i++) {
+ if (!page_flag_names[i])
+ continue;
+ if (!strncmp(str, page_flag_names[i] + 2, len))
+ return 1ULL << i;
+ }
+
+ return parse_number(str);
+}
+
+uint64_t parse_flag_names(const char *str, int all)
+{
+ const char *p = str;
+ uint64_t flags = 0;
+
+ while (1) {
+ if (*p == ',' || *p == '=' || *p == '\0') {
+ if ((*str != '~') || (*str == '~' && all && *++str))
+ flags |= parse_flag_name(str, p - str);
+ if (*p != ',')
+ break;
+ str = p + 1;
+ }
+ p++;
+ }
+
+ return flags;
+}
+
+void parse_bits_mask(const char *optarg)
+{
+ uint64_t mask;
+ uint64_t bits;
+ const char *p;
+
+ p = strchr(optarg, '=');
+ if (p == optarg) {
+ mask = KPF_ALL_BITS;
+ bits = parse_flag_names(p + 1, 0);
+ } else if (p) {
+ mask = parse_flag_names(optarg, 0);
+ bits = parse_flag_names(p + 1, 0);
+ } else if (strchr(optarg, '~')) {
+ mask = parse_flag_names(optarg, 1);
+ bits = parse_flag_names(optarg, 0);
+ } else {
+ mask = parse_flag_names(optarg, 0);
+ bits = KPF_ALL_BITS;
+ }
+
+ add_bits_filter(mask, bits);
+}
+
+
+struct option opts[] = {
+ { "raw" , 0, NULL, 'r' },
+ { "pid" , 1, NULL, 'p' },
+ { "file" , 1, NULL, 'f' },
+ { "addr" , 1, NULL, 'a' },
+ { "bits" , 1, NULL, 'b' },
+ { "list" , 0, NULL, 'l' },
+ { "list-each" , 0, NULL, 'L' },
+ { "no-summary", 0, NULL, 'N' },
+ { "help" , 0, NULL, 'h' },
+ { NULL , 0, NULL, 0 }
+};
+
+int main(int argc, char *argv[])
+{
+ int c;
+
+ page_size = getpagesize();
+
+ while ((c = getopt_long(argc, argv,
+ "rp:f:a:b:lLNh", opts, NULL)) != -1) {
+ switch (c) {
+ case 'r':
+ opt_raw = 1;
+ break;
+ case 'p':
+ parse_pid(optarg);
+ break;
+ case 'f':
+ parse_file(optarg);
+ break;
+ case 'a':
+ parse_addr_range(optarg);
+ break;
+ case 'b':
+ parse_bits_mask(optarg);
+ break;
+ case 'l':
+ opt_list = 1;
+ break;
+ case 'L':
+ opt_list = 2;
+ break;
+ case 'N':
+ opt_no_summary = 1;
+ break;
+ case 'h':
+ usage();
+ exit(0);
+ default:
+ usage();
+ exit(1);
+ }
+ }
+
+ if (opt_list == 1)
+ printf("offset\tcount\tflags\n");
+ if (opt_list == 2)
+ printf("offset\tflags\n");
+
+ walk_addr_ranges();
+
+ if (opt_list == 1)
+ show_page_range(0, 0); /* drain the buffer */
+
+ if (opt_no_summary)
+ return 0;
+
+ if (opt_list)
+ printf("\n\n");
+
+ show_summary();
+
+ return 0;
+}
diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt
index ce72c0f..600a304 100644
--- a/Documentation/vm/pagemap.txt
+++ b/Documentation/vm/pagemap.txt
@@ -12,9 +12,9 @@
value for each virtual page, containing the following data (from
fs/proc/task_mmu.c, above pagemap_read):
- * Bits 0-55 page frame number (PFN) if present
+ * Bits 0-54 page frame number (PFN) if present
* Bits 0-4 swap type if swapped
- * Bits 5-55 swap offset if swapped
+ * Bits 5-54 swap offset if swapped
* Bits 55-60 page shift (page size = 1<<page shift)
* Bit 61 reserved for future use
* Bit 62 page swapped
@@ -36,7 +36,7 @@
* /proc/kpageflags. This file contains a 64-bit set of flags for each
page, indexed by PFN.
- The flags are (from fs/proc/proc_misc, above kpageflags_read):
+ The flags are (from fs/proc/page.c, above kpageflags_read):
0. LOCKED
1. ERROR
@@ -49,6 +49,68 @@
8. WRITEBACK
9. RECLAIM
10. BUDDY
+ 11. MMAP
+ 12. ANON
+ 13. SWAPCACHE
+ 14. SWAPBACKED
+ 15. COMPOUND_HEAD
+ 16. COMPOUND_TAIL
+ 16. HUGE
+ 18. UNEVICTABLE
+ 20. NOPAGE
+
+Short descriptions to the page flags:
+
+ 0. LOCKED
+ page is being locked for exclusive access, eg. by undergoing read/write IO
+
+ 7. SLAB
+ page is managed by the SLAB/SLOB/SLUB/SLQB kernel memory allocator
+ When compound page is used, SLUB/SLQB will only set this flag on the head
+ page; SLOB will not flag it at all.
+
+10. BUDDY
+ a free memory block managed by the buddy system allocator
+ The buddy system organizes free memory in blocks of various orders.
+ An order N block has 2^N physically contiguous pages, with the BUDDY flag
+ set for and _only_ for the first page.
+
+15. COMPOUND_HEAD
+16. COMPOUND_TAIL
+ A compound page with order N consists of 2^N physically contiguous pages.
+ A compound page with order 2 takes the form of "HTTT", where H donates its
+ head page and T donates its tail page(s). The major consumers of compound
+ pages are hugeTLB pages (Documentation/vm/hugetlbpage.txt), the SLUB etc.
+ memory allocators and various device drivers. However in this interface,
+ only huge/giga pages are made visible to end users.
+17. HUGE
+ this is an integral part of a HugeTLB page
+
+20. NOPAGE
+ no page frame exists at the requested address
+
+ [IO related page flags]
+ 1. ERROR IO error occurred
+ 3. UPTODATE page has up-to-date data
+ ie. for file backed page: (in-memory data revision >= on-disk one)
+ 4. DIRTY page has been written to, hence contains new data
+ ie. for file backed page: (in-memory data revision > on-disk one)
+ 8. WRITEBACK page is being synced to disk
+
+ [LRU related page flags]
+ 5. LRU page is in one of the LRU lists
+ 6. ACTIVE page is in the active LRU list
+18. UNEVICTABLE page is in the unevictable (non-)LRU list
+ It is somehow pinned and not a candidate for LRU page reclaims,
+ eg. ramfs pages, shmctl(SHM_LOCK) and mlock() memory segments
+ 2. REFERENCED page has been referenced since last LRU list enqueue/requeue
+ 9. RECLAIM page will be reclaimed soon after its pageout IO completed
+11. MMAP a memory mapped page
+12. ANON a memory mapped page that is not part of a file
+13. SWAPCACHE page is mapped to swap space, ie. has an associated swap entry
+14. SWAPBACKED page is backed by swap/RAM
+
+The page-types tool in this directory can be used to query the above flags.
Using pagemap to do something useful:
diff --git a/MAINTAINERS b/MAINTAINERS
index 09f6b3e..fb94add 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -36,6 +36,12 @@
(scripts/checkpatch.pl) to catch trival style violations.
See Documentation/CodingStyle for guidance here.
+ PLEASE CC: the maintainers and mailing lists that are generated
+ by scripts/get_maintainer.pl. The results returned by the
+ script will be best if you have git installed and are making
+ your changes in a branch derived from Linus' latest git tree.
+ See Documentation/SubmittingPatches for details.
+
PLEASE try to include any credit lines you want added with the
patch. It avoids people being missed off by mistake and makes
it easier to know who wants adding and who doesn't.
@@ -489,7 +495,7 @@
P: Johannes Berg
M: johannes@sipsolutions.net
L: linuxppc-dev@ozlabs.org
-L: alsa-devel@alsa-project.org (subscribers-only)
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: sound/aoa/
@@ -912,7 +918,6 @@
M: dan.j.williams@intel.com
P: Maciej Sosnowski
M: maciej.sosnowski@intel.com
-L: linux-kernel@vger.kernel.org
W: http://sourceforge.net/projects/xscaleiop
S: Supported
F: Documentation/crypto/async-tx-api.txt
@@ -1008,7 +1013,6 @@
ATMEL AT91 / AT32 SERIAL DRIVER
P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
-L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/serial/atmel_serial.c
@@ -1064,7 +1068,6 @@
AUXILIARY DISPLAY DRIVERS
P: Miguel Ojeda Sandonis
M: miguel.ojeda.sandonis@gmail.com
-L: linux-kernel@vger.kernel.org
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
@@ -1134,7 +1137,6 @@
BEFS FILE SYSTEM
P: Sergey S. Kostyliov
M: rathamahata@php4.ru
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/befs.txt
F: fs/befs/
@@ -1142,7 +1144,6 @@
BFS FILE SYSTEM
P: Tigran A. Aivazian
M: tigran@aivazian.fsnet.co.uk
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/bfs.txt
F: fs/bfs/
@@ -1199,7 +1200,6 @@
BLOCK LAYER
P: Jens Axboe
M: axboe@kernel.dk
-L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
S: Maintained
F: block/
@@ -1326,7 +1326,6 @@
M: muli@il.ibm.com
P: Jon D. Mason
M: jdmason@kudzu.us
-L: linux-kernel@vger.kernel.org
L: discuss@x86-64.org
S: Maintained
F: arch/x86/kernel/pci-calgary_64.c
@@ -1378,7 +1377,6 @@
CFAG12864B LCD DRIVER
P: Miguel Ojeda Sandonis
M: miguel.ojeda.sandonis@gmail.com
-L: linux-kernel@vger.kernel.org
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
@@ -1388,7 +1386,6 @@
CFAG12864BFB LCD FRAMEBUFFER DRIVER
P: Miguel Ojeda Sandonis
M: miguel.ojeda.sandonis@gmail.com
-L: linux-kernel@vger.kernel.org
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
@@ -1408,7 +1405,6 @@
CHECKPATCH
P: Andy Whitcroft
M: apw@canonical.com
-L: linux-kernel@vger.kernel.org
S: Supported
F: scripts/checkpatch.pl
@@ -1437,7 +1433,7 @@
CIRRUS LOGIC CS4270 SOUND DRIVER
P: Timur Tabi
M: timur@freescale.com
-L: alsa-devel@alsa-project.org
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/codecs/cs4270*
@@ -1462,6 +1458,7 @@
M: jeykholt@cisco.com
L: linux-scsi@vger.kernel.org
S: Supported
+F: drivers/scsi/fnic/
CODA FILE SYSTEM
P: Jan Harkes
@@ -1534,7 +1531,6 @@
CONFIGFS
P: Joel Becker
M: joel.becker@oracle.com
-L: linux-kernel@vger.kernel.org
S: Supported
F: fs/configfs/
F: include/linux/configfs.h
@@ -1592,7 +1588,6 @@
CPUSETS
P: Paul Menage
M: menage@google.com
-L: linux-kernel@vger.kernel.org
W: http://www.bullopensource.org/cpuset/
W: http://oss.sgi.com/projects/cpusets/
S: Supported
@@ -1799,7 +1794,6 @@
P: Torben Mathiasen
M: device@lanana.org
W: http://lanana.org/docs/device-list/index.html
-L: linux-kernel@vger.kernel.org
S: Maintained
DEVICE-MAPPER (LVM)
@@ -1825,7 +1819,6 @@
DIRECTORY NOTIFICATION (DNOTIFY)
P: Eric Paris
M: eparis@parisplace.org
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/dnotify.txt
F: fs/notify/dnotify/
@@ -1842,7 +1835,6 @@
DISKQUOTA
P: Jan Kara
M: jack@suse.cz
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/quota.txt
F: fs/quota/
@@ -1864,7 +1856,6 @@
M: maciej.sosnowski@intel.com
P: Dan Williams
M: dan.j.williams@intel.com
-L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/dma/
F: include/linux/dma*
@@ -1916,7 +1907,6 @@
DRIVER CORE, KOBJECTS, AND SYSFS
P: Greg Kroah-Hartman
M: gregkh@suse.de
-L: linux-kernel@vger.kernel.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
F: Documentation/kobject.txt
@@ -1982,8 +1972,8 @@
ECRYPT FILE SYSTEM
P: Tyler Hicks
M: tyhicks@linux.vnet.ibm.com
-M: Dustin Kirkland
-P: kirkland@canonical.com
+P: Dustin Kirkland
+M: kirkland@canonical.com
L: ecryptfs-devel@lists.launchpad.net
W: https://launchpad.net/ecryptfs
S: Supported
@@ -2263,7 +2253,6 @@
F: include/linux/firewire*.h
FIRMWARE LOADER (request_firmware)
-L: linux-kernel@vger.kernel.org
S: Orphan
F: Documentation/firmware_class/
F: drivers/base/firmware*.c
@@ -2300,7 +2289,6 @@
P: Zhang Wei
M: zw@zh-kernel.org
L: linuxppc-dev@ozlabs.org
-L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/dma/fsldma.*
@@ -2366,7 +2354,7 @@
FREESCALE SOC SOUND DRIVERS
P: Timur Tabi
M: timur@freescale.com
-L: alsa-devel@alsa-project.org
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
L: linuxppc-dev@ozlabs.org
S: Supported
F: sound/soc/fsl/fsl*
@@ -2500,7 +2488,6 @@
HYPERVISOR VIRTUAL CONSOLE DRIVER
L: linuxppc-dev@ozlabs.org
-L: linux-kernel@vger.kernel.org
S: Odd Fixes
F: drivers/char/hvc_*
@@ -2567,7 +2554,6 @@
HAYES ESP SERIAL DRIVER
P: Andrew J. Robinson
M: arobinso@nyx.net
-L: linux-kernel@vger.kernel.org
W: http://www.nyx.net/~arobinso
S: Maintained
F: Documentation/serial/hayes-esp.txt
@@ -2593,7 +2579,6 @@
HFS FILESYSTEM
P: Roman Zippel
M: zippel@linux-m68k.org
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/hfs.txt
F: fs/hfs/
@@ -2633,7 +2618,6 @@
HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
P: Thomas Gleixner
M: tglx@linutronix.de
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/timers/
F: kernel/hrtimer.c
@@ -2772,7 +2756,6 @@
i386 BOOT CODE
P: H. Peter Anvin
M: hpa@zytor.com
-L: Linux-Kernel@vger.kernel.org
S: Maintained
F: arch/x86/boot/
@@ -2902,7 +2885,6 @@
M: rlove@rlove.org
P: Eric Paris
M: eparis@parisplace.org
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/inotify.txt
F: fs/notify/inotify/
@@ -2950,7 +2932,6 @@
INTEL I/OAT DMA DRIVER
P: Maciej Sosnowski
M: maciej.sosnowski@intel.com
-L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/dma/ioat*
@@ -2966,7 +2947,6 @@
INTEL IOP-ADMA DMA DRIVER
P: Dan Williams
M: dan.j.williams@intel.com
-L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/dma/iop-adma.c
@@ -3279,7 +3259,6 @@
P: Haren Myneni
M: hbabu@us.ibm.com
L: kexec@lists.infradead.org
-L: linux-kernel@vger.kernel.org
W: http://lse.sourceforge.net/kdump/
S: Maintained
F: Documentation/kdump/
@@ -3389,7 +3368,6 @@
P: Eric Biederman
M: ebiederm@xmission.com
W: http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
-L: linux-kernel@vger.kernel.org
L: kexec@lists.infradead.org
S: Maintained
F: include/linux/kexec.h
@@ -3406,6 +3384,14 @@
F: include/linux/kgdb.h
F: kernel/kgdb.c
+KMEMCHECK
+P: Vegard Nossum
+M: vegardno@ifi.uio.no
+P Pekka Enberg
+M: penberg@cs.helsinki.fi
+L: linux-kernel@vger.kernel.org
+S: Maintained
+
KMEMLEAK
P: Catalin Marinas
M: catalin.marinas@arm.com
@@ -3419,7 +3405,6 @@
KMEMTRACE
P: Eduard - Gabriel Munteanu
M: eduard.munteanu@linux360.ro
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/trace/kmemtrace.txt
F: include/trace/kmemtrace.h
@@ -3434,7 +3419,6 @@
M: davem@davemloft.net
P: Masami Hiramatsu
M: mhiramat@redhat.com
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/kprobes.txt
F: include/linux/kprobes.h
@@ -3443,7 +3427,6 @@
KS0108 LCD CONTROLLER DRIVER
P: Miguel Ojeda Sandonis
M: miguel.ojeda.sandonis@gmail.com
-L: linux-kernel@vger.kernel.org
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
@@ -3607,7 +3590,6 @@
M: peterz@infradead.org
P: Ingo Molnar
M: mingo@redhat.com
-L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
S: Maintained
F: Documentation/lockdep*.txt
@@ -3659,7 +3641,6 @@
W: http://www.linux-m32r.org/
S: Maintained
F: arch/m32r/
-F: include/asm-m32r/
M68K ARCHITECTURE
P: Geert Uytterhoeven
@@ -3743,7 +3724,6 @@
MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
P: Nicolas Pitre
M: nico@cam.org
-L: linux-kernel@vger.kernel.org
S: Maintained
MARVELL YUKON / SYSKONNECT DRIVER
@@ -3797,7 +3777,6 @@
MEMORY MANAGEMENT
L: linux-mm@kvack.org
-L: linux-kernel@vger.kernel.org
W: http://www.linux-mm.org
S: Maintained
F: include/linux/mm.h
@@ -3811,7 +3790,6 @@
P: KAMEZAWA Hiroyuki
M: kamezawa.hiroyu@jp.fujitsu.com
L: linux-mm@kvack.org
-L: linux-kernel@vger.kernel.org
S: Maintained
F: mm/memcontrol.c
@@ -3854,7 +3832,6 @@
MISCELLANEOUS MCA-SUPPORT
P: James Bottomley
M: James.Bottomley@HansenPartnership.com
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/ia64/mca.txt
F: Documentation/mca.txt
@@ -3864,7 +3841,6 @@
MODULE SUPPORT
P: Rusty Russell
M: rusty@rustcorp.com.au
-L: linux-kernel@vger.kernel.org
S: Maintained
F: include/linux/module.h
F: kernel/module.c
@@ -3888,7 +3864,6 @@
MOUSE AND MISC DEVICES [GENERAL]
P: Alessandro Rubini
M: rubini@ipvvis.unipv.it
-L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/input/mouse/
F: include/linux/gpio_mouse.h
@@ -3896,7 +3871,6 @@
MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
P: Jiri Slaby
M: jirislaby@gmail.com
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/serial/moxa-smartio
F: drivers/char/mxser.*
@@ -3912,7 +3886,6 @@
MULTIFUNCTION DEVICES (MFD)
P: Samuel Ortiz
M: sameo@linux.intel.com
-L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git
S: Supported
F: drivers/mfd/
@@ -3920,7 +3893,6 @@
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
P: Pierre Ossman
M: pierre@ossman.eu
-L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/mmc/
F: include/linux/mmc/
@@ -3928,7 +3900,6 @@
MULTIMEDIA CARD (MMC) ETC. OVER SPI
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-kernel@vger.kernel.org
S: Odd Fixes
F: drivers/mmc/host/mmc_spi.c
F: include/linux/spi/mmc_spi.h
@@ -3943,7 +3914,6 @@
MULTITECH MULTIPORT CARD (ISICOM)
P: Jiri Slaby
M: jirislaby@gmail.com
-L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/char/isicom.c
F: include/linux/isicom.h
@@ -4187,7 +4157,6 @@
P: Anton Altaparmakov
M: aia21@cantab.net
L: linux-ntfs-dev@lists.sourceforge.net
-L: linux-kernel@vger.kernel.org
W: http://www.linux-ntfs.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
S: Maintained
@@ -4421,7 +4390,6 @@
P: Rusty Russell
M: rusty@rustcorp.com.au
L: virtualization@lists.osdl.org
-L: linux-kernel@vger.kernel.org
S: Supported
F: Documentation/ia64/paravirt_ops.txt
F: arch/*/kernel/paravirt*
@@ -4472,7 +4440,6 @@
PCI ERROR RECOVERY
P: Linas Vepstas
M: linas@austin.ibm.com
-L: linux-kernel@vger.kernel.org
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/PCI/pci-error-recovery.txt
@@ -4481,7 +4448,6 @@
PCI SUBSYSTEM
P: Jesse Barnes
M: jbarnes@virtuousgeek.org
-L: linux-kernel@vger.kernel.org
L: linux-pci@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
S: Supported
@@ -4516,7 +4482,6 @@
PER-TASK DELAY ACCOUNTING
P: Balbir Singh
M: balbir@linux.vnet.ibm.com
-L: linux-kernel@vger.kernel.org
S: Maintained
F: include/linux/delayacct.h
F: kernel/delayacct.c
@@ -4548,7 +4513,6 @@
PKTCDVD DRIVER
P: Peter Osterlund
M: petero2@telia.com
-L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/block/pktcdvd.c
F: include/linux/pktcdvd.h
@@ -4556,7 +4520,6 @@
POSIX CLOCKS and TIMERS
P: Thomas Gleixner
M: tglx@linutronix.de
-L: linux-kernel@vger.kernel.org
S: Supported
F: fs/timerfd.c
F: include/linux/timer*
@@ -4567,7 +4530,6 @@
M: cbou@mail.ru
P: David Woodhouse
M: dwmw2@infradead.org
-L: linux-kernel@vger.kernel.org
T: git git://git.infradead.org/battery-2.6.git
S: Maintained
F: include/linux/power_supply.h
@@ -4619,7 +4581,6 @@
PREEMPTIBLE KERNEL
P: Robert Love
M: rml@tech9.net
-L: linux-kernel@vger.kernel.org
L: kpreempt-tech@lists.sourceforge.net
W: ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
S: Supported
@@ -4682,7 +4643,6 @@
M: roland@redhat.com
P: Oleg Nesterov
M: oleg@redhat.com
-L: linux-kernel@vger.kernel.org
S: Maintained
F: include/asm-generic/syscall.h
F: include/linux/ptrace.h
@@ -4768,7 +4728,6 @@
QNX4 FILESYSTEM
P: Anders Larsen
M: al@alarsen.net
-L: linux-kernel@vger.kernel.org
W: http://www.alarsen.net/linux/qnx4fs/
S: Maintained
F: fs/qnx4/
@@ -4815,7 +4774,6 @@
RAPIDIO SUBSYSTEM
P: Matt Porter
M: mporter@kernel.crashing.org
-L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/rapidio/
@@ -4829,7 +4787,8 @@
RCUTORTURE MODULE
P: Josh Triplett
M: josh@freedesktop.org
-L: linux-kernel@vger.kernel.org
+P: Paul E. McKenney
+M: paulmck@linux.vnet.ibm.com
S: Maintained
F: Documentation/RCU/torture.txt
F: kernel/rcutorture.c
@@ -4837,7 +4796,6 @@
RDC R-321X SoC
P: Florian Fainelli
M: florian@openwrt.org
-L: linux-kernel@vger.kernel.org
S: Maintained
RDC R6040 FAST ETHERNET DRIVER
@@ -4857,8 +4815,9 @@
READ-COPY UPDATE (RCU)
P: Dipankar Sarma
M: dipankar@in.ibm.com
+P: Paul E. McKenney
+M: paulmck@linux.vnet.ibm.com
W: http://www.rdrop.com/users/paulmck/rclock/
-L: linux-kernel@vger.kernel.org
S: Supported
F: Documentation/RCU/rcu.txt
F: Documentation/RCU/rcuref.txt
@@ -4869,7 +4828,6 @@
REAL TIME CLOCK DRIVER
P: Paul Gortmaker
M: p_gortmaker@yahoo.com
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/rtc.txt
F: drivers/rtc/
@@ -5007,7 +4965,6 @@
P: Ben Dooks
M: ben-linux@fluff.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/mmc/host/s3cmci.*
@@ -5033,7 +4990,6 @@
M: mingo@elte.hu
P: Peter Zijlstra
M: peterz@infradead.org
-L: linux-kernel@vger.kernel.org
S: Maintained
F: kernel/sched*
F: include/linux/sched.h
@@ -5135,7 +5091,6 @@
SECURITY SUBSYSTEM
P: James Morris
M: jmorris@namei.org
-L: linux-kernel@vger.kernel.org
L: linux-security-module@vger.kernel.org (suggested Cc:)
T: git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
W: http://security.wiki.kernel.org/
@@ -5154,7 +5109,6 @@
M: jmorris@namei.org
P: Eric Paris
M: eparis@parisplace.org
-L: linux-kernel@vger.kernel.org (kernel issues)
L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://selinuxproject.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
@@ -5417,7 +5371,6 @@
SONY MEMORYSTICK CARD SUPPORT
P: Alex Dubov
M: oakad@yahoo.com
-L: linux-kernel@vger.kernel.org
W: http://tifmxx.berlios.de/
S: Maintained
F: drivers/memstick/host/tifm_ms.c
@@ -5427,7 +5380,7 @@
M: perex@perex.cz
P: Takashi Iwai
M: tiwai@suse.de
-L: alsa-devel@alsa-project.org (subscribers-only)
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://www.alsa-project.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
T: git git://git.alsa-project.org/alsa-kernel.git
@@ -5442,7 +5395,7 @@
P: Mark Brown
M: broonie@opensource.wolfsonmicro.com
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
-L: alsa-devel@alsa-project.org (subscribers-only)
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://alsa-project.org/main/index.php/ASoC
S: Supported
F: sound/soc/
@@ -5460,7 +5413,6 @@
SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
P: Roger Wolff
M: R.E.Wolff@BitWizard.nl
-L: linux-kernel@vger.kernel.org
S: Supported
F: Documentation/serial/specialix.txt
F: drivers/char/specialix*
@@ -5506,7 +5458,6 @@
SRM (Alpha) environment access
P: Jan-Benedict Glaw
M: jbglaw@lug-owl.de
-L: linux-kernel@vger.kernel.org
S: Maintained
F: arch/alpha/kernel/srm_env.c
@@ -5521,7 +5472,6 @@
STAGING SUBSYSTEM
P: Greg Kroah-Hartman
M: gregkh@suse.de
-L: linux-kernel@vger.kernel.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Maintained
F: drivers/staging/
@@ -5601,7 +5551,6 @@
TASKSTATS STATISTICS INTERFACE
P: Balbir Singh
M: balbir@linux.vnet.ibm.com
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/accounting/taskstats*
F: include/linux/taskstats*
@@ -5694,7 +5643,6 @@
M: takedakn@nttdata.co.jp
P: Tetsuo Handa
M: penguin-kernel@I-love.SAKURA.ne.jp
-L: linux-kernel@vger.kernel.org (kernel issues)
L: tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and users in English)
L: tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese)
L: tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese)
@@ -5746,14 +5694,17 @@
TRIVIAL PATCHES
P: Jiri Kosina
M: trivial@kernel.org
-L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
S: Maintained
+F: drivers/char/tty_*
+F: drivers/serial/serial_core.c
+F: include/linux/serial_core.h
+F: include/linux/serial.h
+F: include/linux/tty.h
TTY LAYER
P: Alan Cox
M: alan@lxorguk.ukuu.org.uk
-L: linux-kernel@vger.kernel.org
S: Maintained
T: stgit http://zeniv.linux.org.uk/~alan/ttydev/
@@ -5826,7 +5777,6 @@
UFS FILESYSTEM
P: Evgeniy Dushistov
M: dushistov@mail.ru
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/ufs.txt
F: fs/ufs/
@@ -5843,7 +5793,6 @@
UNIFORM CDROM DRIVER
P: Jens Axboe
M: axboe@kernel.dk
-L: linux-kernel@vger.kernel.org
W: http://www.kernel.dk
S: Maintained
F: Documentation/cdrom/
@@ -5872,7 +5821,6 @@
USB BLOCK DRIVER (UB ub)
P: Pete Zaitcev
M: zaitcev@redhat.com
-L: linux-kernel@vger.kernel.org
L: linux-usb@vger.kernel.org
S: Supported
F: drivers/block/ub.c
@@ -6165,6 +6113,12 @@
S: Maintained
F: drivers/net/wireless/rndis_wlan.c
+USB XHCI DRIVER
+P: Sarah Sharp
+M: sarah.a.sharp@intel.com
+L: linux-usb@vger.kernel.org
+S: Supported
+
USB ZC0301 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
@@ -6212,7 +6166,6 @@
M: hjk@linutronix.de
P: Greg Kroah-Hartman
M: gregkh@suse.de
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/DocBook/uio-howto.tmpl
F: drivers/uio/
@@ -6238,7 +6191,6 @@
VFAT/FAT/MSDOS FILESYSTEM
P: OGAWA Hirofumi
M: hirofumi@mail.parknet.co.jp
-L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/filesystems/vfat.txt
F: fs/fat/
@@ -6282,6 +6234,14 @@
F: include/linux/if_*vlan.h
F: net/8021q/
+VLYNQ BUS
+P: Florian Fainelli
+M: florian@openwrt.org
+L: openwrt-devel@lists.openwrt.org
+S: Maintained
+F: drivers/vlynq/vlynq.c
+F: include/linux/vlynq.h
+
VOLTAGE AND CURRENT REGULATOR FRAMEWORK
P: Liam Girdwood
M: lrg@slimlogic.co.uk
@@ -6335,7 +6295,6 @@
W83L51xD SD/MMC CARD INTERFACE DRIVER
P: Pierre Ossman
M: pierre@ossman.eu
-L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/mmc/host/wbsd.*
@@ -6422,7 +6381,6 @@
P: H. Peter Anvin
M: hpa@zytor.com
M: x86@kernel.org
-L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
S: Maintained
F: Documentation/x86/
@@ -6458,7 +6416,6 @@
P: Grant Likely
M: grant.likely@secretlab.ca
W: http://www.secretlab.ca/
-L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/block/xsysace.c
@@ -6523,5 +6480,9 @@
THE REST
P: Linus Torvalds
+M: torvalds@linux-foundation.org
+L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
S: Buried alive in reporters
+F: *
+F: */
diff --git a/arch/alpha/include/asm/8253pit.h b/arch/alpha/include/asm/8253pit.h
index fef5c14..a71c9c1 100644
--- a/arch/alpha/include/asm/8253pit.h
+++ b/arch/alpha/include/asm/8253pit.h
@@ -1,10 +1,3 @@
/*
* 8253/8254 Programmable Interval Timer
*/
-
-#ifndef _8253PIT_H
-#define _8253PIT_H
-
-#define PIT_TICK_RATE 1193180UL
-
-#endif
diff --git a/arch/alpha/include/asm/kmap_types.h b/arch/alpha/include/asm/kmap_types.h
index 3e6735a..a8d4ec8 100644
--- a/arch/alpha/include/asm/kmap_types.h
+++ b/arch/alpha/include/asm/kmap_types.h
@@ -3,30 +3,12 @@
/* Dummy header just to define km_type. */
-
#ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define __WITH_KM_FENCE
#endif
-enum km_type {
-D(0) KM_BOUNCE_READ,
-D(1) KM_SKB_SUNRPC_DATA,
-D(2) KM_SKB_DATA_SOFTIRQ,
-D(3) KM_USER0,
-D(4) KM_USER1,
-D(5) KM_BIO_SRC_IRQ,
-D(6) KM_BIO_DST_IRQ,
-D(7) KM_PTE0,
-D(8) KM_PTE1,
-D(9) KM_IRQ0,
-D(10) KM_IRQ1,
-D(11) KM_SOFTIRQ0,
-D(12) KM_SOFTIRQ1,
-D(13) KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
-#undef D
+#undef __WITH_KM_FENCE
#endif
diff --git a/arch/alpha/kernel/init_task.c b/arch/alpha/kernel/init_task.c
index c2938e5..19b8632 100644
--- a/arch/alpha/kernel/init_task.c
+++ b/arch/alpha/kernel/init_task.c
@@ -10,10 +10,7 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
struct task_struct init_task = INIT_TASK(init_task);
-
-EXPORT_SYMBOL(init_mm);
EXPORT_SYMBOL(init_task);
union thread_union init_thread_union
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index 67c19f8..38c805d 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -227,7 +227,7 @@
.name = "timer",
};
-static struct hw_interrupt_type rtc_irq_type = {
+static struct irq_chip rtc_irq_type = {
.typename = "RTC",
.startup = rtc_startup,
.shutdown = rtc_enable_disable,
diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c
index 9405bee..50bfec9 100644
--- a/arch/alpha/kernel/irq_i8259.c
+++ b/arch/alpha/kernel/irq_i8259.c
@@ -83,7 +83,7 @@
i8259a_enable_irq(irq);
}
-struct hw_interrupt_type i8259a_irq_type = {
+struct irq_chip i8259a_irq_type = {
.typename = "XT-PIC",
.startup = i8259a_startup_irq,
.shutdown = i8259a_disable_irq,
diff --git a/arch/alpha/kernel/irq_impl.h b/arch/alpha/kernel/irq_impl.h
index cc9a8a7..b63ccd7 100644
--- a/arch/alpha/kernel/irq_impl.h
+++ b/arch/alpha/kernel/irq_impl.h
@@ -36,7 +36,7 @@
extern void i8259a_mask_and_ack_irq(unsigned int);
extern unsigned int i8259a_startup_irq(unsigned int);
extern void i8259a_end_irq(unsigned int);
-extern struct hw_interrupt_type i8259a_irq_type;
+extern struct irq_chip i8259a_irq_type;
extern void init_i8259a_irqs(void);
extern void handle_irq(int irq);
diff --git a/arch/alpha/kernel/irq_pyxis.c b/arch/alpha/kernel/irq_pyxis.c
index d53edbc..69199a7 100644
--- a/arch/alpha/kernel/irq_pyxis.c
+++ b/arch/alpha/kernel/irq_pyxis.c
@@ -70,7 +70,7 @@
*(vulp)PYXIS_INT_MASK;
}
-static struct hw_interrupt_type pyxis_irq_type = {
+static struct irq_chip pyxis_irq_type = {
.typename = "PYXIS",
.startup = pyxis_startup_irq,
.shutdown = pyxis_disable_irq,
diff --git a/arch/alpha/kernel/irq_srm.c b/arch/alpha/kernel/irq_srm.c
index a03fbca..8522936 100644
--- a/arch/alpha/kernel/irq_srm.c
+++ b/arch/alpha/kernel/irq_srm.c
@@ -48,7 +48,7 @@
}
/* Handle interrupts from the SRM, assuming no additional weirdness. */
-static struct hw_interrupt_type srm_irq_type = {
+static struct irq_chip srm_irq_type = {
.typename = "SRM",
.startup = srm_startup_irq,
.shutdown = srm_disable_irq,
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index 80df86c..d2634e4 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -252,9 +252,9 @@
}
#define PFN_MAX PFN_DOWN(0x80000000)
-#define for_each_mem_cluster(memdesc, cluster, i) \
- for ((cluster) = (memdesc)->cluster, (i) = 0; \
- (i) < (memdesc)->numclusters; (i)++, (cluster)++)
+#define for_each_mem_cluster(memdesc, _cluster, i) \
+ for ((_cluster) = (memdesc)->cluster, (i) = 0; \
+ (i) < (memdesc)->numclusters; (i)++, (_cluster)++)
static unsigned long __init
get_mem_size_limit(char *s)
diff --git a/arch/alpha/kernel/sys_alcor.c b/arch/alpha/kernel/sys_alcor.c
index e53a1e1..382035e 100644
--- a/arch/alpha/kernel/sys_alcor.c
+++ b/arch/alpha/kernel/sys_alcor.c
@@ -89,7 +89,7 @@
alcor_enable_irq(irq);
}
-static struct hw_interrupt_type alcor_irq_type = {
+static struct irq_chip alcor_irq_type = {
.typename = "ALCOR",
.startup = alcor_startup_irq,
.shutdown = alcor_disable_irq,
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
index ace475c..ed34943 100644
--- a/arch/alpha/kernel/sys_cabriolet.c
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -71,7 +71,7 @@
cabriolet_enable_irq(irq);
}
-static struct hw_interrupt_type cabriolet_irq_type = {
+static struct irq_chip cabriolet_irq_type = {
.typename = "CABRIOLET",
.startup = cabriolet_startup_irq,
.shutdown = cabriolet_disable_irq,
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
index 5bd5259..46e70ec 100644
--- a/arch/alpha/kernel/sys_dp264.c
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -198,7 +198,7 @@
return 0;
}
-static struct hw_interrupt_type dp264_irq_type = {
+static struct irq_chip dp264_irq_type = {
.typename = "DP264",
.startup = dp264_startup_irq,
.shutdown = dp264_disable_irq,
@@ -209,7 +209,7 @@
.set_affinity = dp264_set_affinity,
};
-static struct hw_interrupt_type clipper_irq_type = {
+static struct irq_chip clipper_irq_type = {
.typename = "CLIPPER",
.startup = clipper_startup_irq,
.shutdown = clipper_disable_irq,
@@ -298,7 +298,7 @@
}
static void __init
-init_tsunami_irqs(struct hw_interrupt_type * ops, int imin, int imax)
+init_tsunami_irqs(struct irq_chip * ops, int imin, int imax)
{
long i;
for (i = imin; i <= imax; ++i) {
diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c
index 9c5a306..660c23e 100644
--- a/arch/alpha/kernel/sys_eb64p.c
+++ b/arch/alpha/kernel/sys_eb64p.c
@@ -69,7 +69,7 @@
eb64p_enable_irq(irq);
}
-static struct hw_interrupt_type eb64p_irq_type = {
+static struct irq_chip eb64p_irq_type = {
.typename = "EB64P",
.startup = eb64p_startup_irq,
.shutdown = eb64p_disable_irq,
diff --git a/arch/alpha/kernel/sys_eiger.c b/arch/alpha/kernel/sys_eiger.c
index baf60f3..b99ea48 100644
--- a/arch/alpha/kernel/sys_eiger.c
+++ b/arch/alpha/kernel/sys_eiger.c
@@ -80,7 +80,7 @@
eiger_enable_irq(irq);
}
-static struct hw_interrupt_type eiger_irq_type = {
+static struct irq_chip eiger_irq_type = {
.typename = "EIGER",
.startup = eiger_startup_irq,
.shutdown = eiger_disable_irq,
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
index 2b5caf3..ef0b83a 100644
--- a/arch/alpha/kernel/sys_jensen.c
+++ b/arch/alpha/kernel/sys_jensen.c
@@ -118,7 +118,7 @@
i8259a_end_irq(1);
}
-static struct hw_interrupt_type jensen_local_irq_type = {
+static struct irq_chip jensen_local_irq_type = {
.typename = "LOCAL",
.startup = jensen_local_startup,
.shutdown = jensen_local_shutdown,
diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c
index c5a1a24..bbfc4f2 100644
--- a/arch/alpha/kernel/sys_marvel.c
+++ b/arch/alpha/kernel/sys_marvel.c
@@ -169,7 +169,7 @@
return 0;
}
-static struct hw_interrupt_type marvel_legacy_irq_type = {
+static struct irq_chip marvel_legacy_irq_type = {
.typename = "LEGACY",
.startup = marvel_irq_noop_return,
.shutdown = marvel_irq_noop,
@@ -179,7 +179,7 @@
.end = marvel_irq_noop,
};
-static struct hw_interrupt_type io7_lsi_irq_type = {
+static struct irq_chip io7_lsi_irq_type = {
.typename = "LSI",
.startup = io7_startup_irq,
.shutdown = io7_disable_irq,
@@ -189,7 +189,7 @@
.end = io7_end_irq,
};
-static struct hw_interrupt_type io7_msi_irq_type = {
+static struct irq_chip io7_msi_irq_type = {
.typename = "MSI",
.startup = io7_startup_irq,
.shutdown = io7_disable_irq,
@@ -273,8 +273,8 @@
static void __init
init_io7_irqs(struct io7 *io7,
- struct hw_interrupt_type *lsi_ops,
- struct hw_interrupt_type *msi_ops)
+ struct irq_chip *lsi_ops,
+ struct irq_chip *msi_ops)
{
long base = (io7->pe << MARVEL_IRQ_VEC_PE_SHIFT) + 16;
long i;
diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c
index 8d3e942..4e36664 100644
--- a/arch/alpha/kernel/sys_mikasa.c
+++ b/arch/alpha/kernel/sys_mikasa.c
@@ -68,7 +68,7 @@
mikasa_enable_irq(irq);
}
-static struct hw_interrupt_type mikasa_irq_type = {
+static struct irq_chip mikasa_irq_type = {
.typename = "MIKASA",
.startup = mikasa_startup_irq,
.shutdown = mikasa_disable_irq,
diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c
index 538876b..35753a1 100644
--- a/arch/alpha/kernel/sys_noritake.c
+++ b/arch/alpha/kernel/sys_noritake.c
@@ -73,7 +73,7 @@
noritake_enable_irq(irq);
}
-static struct hw_interrupt_type noritake_irq_type = {
+static struct irq_chip noritake_irq_type = {
.typename = "NORITAKE",
.startup = noritake_startup_irq,
.shutdown = noritake_disable_irq,
diff --git a/arch/alpha/kernel/sys_rawhide.c b/arch/alpha/kernel/sys_rawhide.c
index 672cb2d..f3aec7e 100644
--- a/arch/alpha/kernel/sys_rawhide.c
+++ b/arch/alpha/kernel/sys_rawhide.c
@@ -135,7 +135,7 @@
rawhide_enable_irq(irq);
}
-static struct hw_interrupt_type rawhide_irq_type = {
+static struct irq_chip rawhide_irq_type = {
.typename = "RAWHIDE",
.startup = rawhide_startup_irq,
.shutdown = rawhide_disable_irq,
diff --git a/arch/alpha/kernel/sys_ruffian.c b/arch/alpha/kernel/sys_ruffian.c
index f15a329..d9f9cfe 100644
--- a/arch/alpha/kernel/sys_ruffian.c
+++ b/arch/alpha/kernel/sys_ruffian.c
@@ -14,6 +14,7 @@
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/ioport.h>
+#include <linux/timex.h>
#include <linux/init.h>
#include <asm/ptrace.h>
diff --git a/arch/alpha/kernel/sys_rx164.c b/arch/alpha/kernel/sys_rx164.c
index ce1faa6..fc92463 100644
--- a/arch/alpha/kernel/sys_rx164.c
+++ b/arch/alpha/kernel/sys_rx164.c
@@ -72,7 +72,7 @@
rx164_enable_irq(irq);
}
-static struct hw_interrupt_type rx164_irq_type = {
+static struct irq_chip rx164_irq_type = {
.typename = "RX164",
.startup = rx164_startup_irq,
.shutdown = rx164_disable_irq,
diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c
index 9e26325..426eb69 100644
--- a/arch/alpha/kernel/sys_sable.c
+++ b/arch/alpha/kernel/sys_sable.c
@@ -501,7 +501,7 @@
spin_unlock(&sable_lynx_irq_lock);
}
-static struct hw_interrupt_type sable_lynx_irq_type = {
+static struct irq_chip sable_lynx_irq_type = {
.typename = "SABLE/LYNX",
.startup = sable_lynx_startup_irq,
.shutdown = sable_lynx_disable_irq,
diff --git a/arch/alpha/kernel/sys_takara.c b/arch/alpha/kernel/sys_takara.c
index 9bd9a31..830318c 100644
--- a/arch/alpha/kernel/sys_takara.c
+++ b/arch/alpha/kernel/sys_takara.c
@@ -74,7 +74,7 @@
takara_enable_irq(irq);
}
-static struct hw_interrupt_type takara_irq_type = {
+static struct irq_chip takara_irq_type = {
.typename = "TAKARA",
.startup = takara_startup_irq,
.shutdown = takara_disable_irq,
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
index 8dd239e..88978fc 100644
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@@ -185,7 +185,7 @@
static void __init
-init_titan_irqs(struct hw_interrupt_type * ops, int imin, int imax)
+init_titan_irqs(struct irq_chip * ops, int imin, int imax)
{
long i;
for (i = imin; i <= imax; ++i) {
@@ -194,7 +194,7 @@
}
}
-static struct hw_interrupt_type titan_irq_type = {
+static struct irq_chip titan_irq_type = {
.typename = "TITAN",
.startup = titan_startup_irq,
.shutdown = titan_disable_irq,
diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c
index 42c3eed..e91b4c3 100644
--- a/arch/alpha/kernel/sys_wildfire.c
+++ b/arch/alpha/kernel/sys_wildfire.c
@@ -157,7 +157,7 @@
wildfire_enable_irq(irq);
}
-static struct hw_interrupt_type wildfire_irq_type = {
+static struct irq_chip wildfire_irq_type = {
.typename = "WILDFIRE",
.startup = wildfire_startup_irq,
.shutdown = wildfire_disable_irq,
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index a13de49..0eab557 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -28,9 +28,9 @@
#define DBGDCONT(args...)
#endif
-#define for_each_mem_cluster(memdesc, cluster, i) \
- for ((cluster) = (memdesc)->cluster, (i) = 0; \
- (i) < (memdesc)->numclusters; (i)++, (cluster)++)
+#define for_each_mem_cluster(memdesc, _cluster, i) \
+ for ((_cluster) = (memdesc)->cluster, (i) = 0; \
+ (i) < (memdesc)->numclusters; (i)++, (_cluster)++)
static void __init show_mem_layout(void)
{
diff --git a/arch/arm/kernel/init_task.c b/arch/arm/kernel/init_task.c
index e859af3..3f47086 100644
--- a/arch/arm/kernel/init_task.c
+++ b/arch/arm/kernel/init_task.c
@@ -14,10 +14,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial thread structure.
*
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
new file mode 100644
index 0000000..36a85f5
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
@@ -0,0 +1,50 @@
+/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB2.0 Highspeed/OtG device PHY registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, this is a seperate header file as some of the clock framework
+ * needs to touch this if the clk_48m is used as the USB OHCI or other
+ * peripheral source.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
+#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
+
+/* S3C64XX_PA_USB_HSPHY */
+
+#define S3C_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
+
+#define S3C_PHYPWR S3C_HSOTG_PHYREG(0x00)
+#define SRC_PHYPWR_OTG_DISABLE (1 << 4)
+#define SRC_PHYPWR_ANALOG_POWERDOWN (1 << 3)
+#define SRC_PHYPWR_FORCE_SUSPEND (1 << 1)
+
+#define S3C_PHYCLK S3C_HSOTG_PHYREG(0x04)
+#define S3C_PHYCLK_MODE_USB11 (1 << 6)
+#define S3C_PHYCLK_EXT_OSC (1 << 5)
+#define S3C_PHYCLK_CLK_FORCE (1 << 4)
+#define S3C_PHYCLK_ID_PULL (1 << 2)
+#define S3C_PHYCLK_CLKSEL_MASK (0x3 << 0)
+#define S3C_PHYCLK_CLKSEL_SHIFT (0)
+#define S3C_PHYCLK_CLKSEL_48M (0x0 << 0)
+#define S3C_PHYCLK_CLKSEL_12M (0x2 << 0)
+#define S3C_PHYCLK_CLKSEL_24M (0x3 << 0)
+
+#define S3C_RSTCON S3C_HSOTG_PHYREG(0x08)
+#define S3C_RSTCON_PHYCLK (1 << 2)
+#define S3C_RSTCON_HCLK (1 << 2)
+#define S3C_RSTCON_PHY (1 << 0)
+
+#define S3C_PHYTUNE S3C_HSOTG_PHYREG(0x20)
+
+#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
new file mode 100644
index 0000000..8d18d9d
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
@@ -0,0 +1,377 @@
+/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB2.0 Highspeed/OtG device block registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H
+#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__
+
+#define S3C_HSOTG_REG(x) (x)
+
+#define S3C_GOTGCTL S3C_HSOTG_REG(0x000)
+#define S3C_GOTGCTL_BSESVLD (1 << 19)
+#define S3C_GOTGCTL_ASESVLD (1 << 18)
+#define S3C_GOTGCTL_DBNC_SHORT (1 << 17)
+#define S3C_GOTGCTL_CONID_B (1 << 16)
+#define S3C_GOTGCTL_DEVHNPEN (1 << 11)
+#define S3C_GOTGCTL_HSSETHNPEN (1 << 10)
+#define S3C_GOTGCTL_HNPREQ (1 << 9)
+#define S3C_GOTGCTL_HSTNEGSCS (1 << 8)
+#define S3C_GOTGCTL_SESREQ (1 << 1)
+#define S3C_GOTGCTL_SESREQSCS (1 << 0)
+
+#define S3C_GOTGINT S3C_HSOTG_REG(0x004)
+#define S3C_GOTGINT_DbnceDone (1 << 19)
+#define S3C_GOTGINT_ADevTOUTChg (1 << 18)
+#define S3C_GOTGINT_HstNegDet (1 << 17)
+#define S3C_GOTGINT_HstnegSucStsChng (1 << 9)
+#define S3C_GOTGINT_SesReqSucStsChng (1 << 8)
+#define S3C_GOTGINT_SesEndDet (1 << 2)
+
+#define S3C_GAHBCFG S3C_HSOTG_REG(0x008)
+#define S3C_GAHBCFG_PTxFEmpLvl (1 << 8)
+#define S3C_GAHBCFG_NPTxFEmpLvl (1 << 7)
+#define S3C_GAHBCFG_DMAEn (1 << 5)
+#define S3C_GAHBCFG_HBstLen_MASK (0xf << 1)
+#define S3C_GAHBCFG_HBstLen_SHIFT (1)
+#define S3C_GAHBCFG_HBstLen_Single (0x0 << 1)
+#define S3C_GAHBCFG_HBstLen_Incr (0x1 << 1)
+#define S3C_GAHBCFG_HBstLen_Incr4 (0x3 << 1)
+#define S3C_GAHBCFG_HBstLen_Incr8 (0x5 << 1)
+#define S3C_GAHBCFG_HBstLen_Incr16 (0x7 << 1)
+#define S3C_GAHBCFG_GlblIntrEn (1 << 0)
+
+#define S3C_GUSBCFG S3C_HSOTG_REG(0x00C)
+#define S3C_GUSBCFG_PHYLPClkSel (1 << 15)
+#define S3C_GUSBCFG_HNPCap (1 << 9)
+#define S3C_GUSBCFG_SRPCap (1 << 8)
+#define S3C_GUSBCFG_PHYIf16 (1 << 3)
+#define S3C_GUSBCFG_TOutCal_MASK (0x7 << 0)
+#define S3C_GUSBCFG_TOutCal_SHIFT (0)
+#define S3C_GUSBCFG_TOutCal_LIMIT (0x7)
+#define S3C_GUSBCFG_TOutCal(_x) ((_x) << 0)
+
+#define S3C_GRSTCTL S3C_HSOTG_REG(0x010)
+
+#define S3C_GRSTCTL_AHBIdle (1 << 31)
+#define S3C_GRSTCTL_DMAReq (1 << 30)
+#define S3C_GRSTCTL_TxFNum_MASK (0x1f << 6)
+#define S3C_GRSTCTL_TxFNum_SHIFT (6)
+#define S3C_GRSTCTL_TxFNum_LIMIT (0x1f)
+#define S3C_GRSTCTL_TxFNum(_x) ((_x) << 6)
+#define S3C_GRSTCTL_TxFFlsh (1 << 5)
+#define S3C_GRSTCTL_RxFFlsh (1 << 4)
+#define S3C_GRSTCTL_INTknQFlsh (1 << 3)
+#define S3C_GRSTCTL_FrmCntrRst (1 << 2)
+#define S3C_GRSTCTL_HSftRst (1 << 1)
+#define S3C_GRSTCTL_CSftRst (1 << 0)
+
+#define S3C_GINTSTS S3C_HSOTG_REG(0x014)
+#define S3C_GINTMSK S3C_HSOTG_REG(0x018)
+
+#define S3C_GINTSTS_WkUpInt (1 << 31)
+#define S3C_GINTSTS_SessReqInt (1 << 30)
+#define S3C_GINTSTS_DisconnInt (1 << 29)
+#define S3C_GINTSTS_ConIDStsChng (1 << 28)
+#define S3C_GINTSTS_PTxFEmp (1 << 26)
+#define S3C_GINTSTS_HChInt (1 << 25)
+#define S3C_GINTSTS_PrtInt (1 << 24)
+#define S3C_GINTSTS_FetSusp (1 << 22)
+#define S3C_GINTSTS_incompIP (1 << 21)
+#define S3C_GINTSTS_IncomplSOIN (1 << 20)
+#define S3C_GINTSTS_OEPInt (1 << 19)
+#define S3C_GINTSTS_IEPInt (1 << 18)
+#define S3C_GINTSTS_EPMis (1 << 17)
+#define S3C_GINTSTS_EOPF (1 << 15)
+#define S3C_GINTSTS_ISOutDrop (1 << 14)
+#define S3C_GINTSTS_EnumDone (1 << 13)
+#define S3C_GINTSTS_USBRst (1 << 12)
+#define S3C_GINTSTS_USBSusp (1 << 11)
+#define S3C_GINTSTS_ErlySusp (1 << 10)
+#define S3C_GINTSTS_GOUTNakEff (1 << 7)
+#define S3C_GINTSTS_GINNakEff (1 << 6)
+#define S3C_GINTSTS_NPTxFEmp (1 << 5)
+#define S3C_GINTSTS_RxFLvl (1 << 4)
+#define S3C_GINTSTS_SOF (1 << 3)
+#define S3C_GINTSTS_OTGInt (1 << 2)
+#define S3C_GINTSTS_ModeMis (1 << 1)
+#define S3C_GINTSTS_CurMod_Host (1 << 0)
+
+#define S3C_GRXSTSR S3C_HSOTG_REG(0x01C)
+#define S3C_GRXSTSP S3C_HSOTG_REG(0x020)
+
+#define S3C_GRXSTS_FN_MASK (0x7f << 25)
+#define S3C_GRXSTS_FN_SHIFT (25)
+
+#define S3C_GRXSTS_PktSts_MASK (0xf << 17)
+#define S3C_GRXSTS_PktSts_SHIFT (17)
+#define S3C_GRXSTS_PktSts_GlobalOutNAK (0x1 << 17)
+#define S3C_GRXSTS_PktSts_OutRX (0x2 << 17)
+#define S3C_GRXSTS_PktSts_OutDone (0x3 << 17)
+#define S3C_GRXSTS_PktSts_SetupDone (0x4 << 17)
+#define S3C_GRXSTS_PktSts_SetupRX (0x6 << 17)
+
+#define S3C_GRXSTS_DPID_MASK (0x3 << 15)
+#define S3C_GRXSTS_DPID_SHIFT (15)
+#define S3C_GRXSTS_ByteCnt_MASK (0x7ff << 4)
+#define S3C_GRXSTS_ByteCnt_SHIFT (4)
+#define S3C_GRXSTS_EPNum_MASK (0xf << 0)
+#define S3C_GRXSTS_EPNum_SHIFT (0)
+
+#define S3C_GRXFSIZ S3C_HSOTG_REG(0x024)
+
+#define S3C_GNPTXFSIZ S3C_HSOTG_REG(0x028)
+
+#define S3C_GNPTXFSIZ_NPTxFDep_MASK (0xffff << 16)
+#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT (16)
+#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT (0xffff)
+#define S3C_GNPTXFSIZ_NPTxFDep(_x) ((_x) << 16)
+#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK (0xffff << 0)
+#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT (0)
+#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT (0xffff)
+#define S3C_GNPTXFSIZ_NPTxFStAddr(_x) ((_x) << 0)
+
+#define S3C_GNPTXSTS S3C_HSOTG_REG(0x02C)
+
+#define S3C_GNPTXSTS_NPtxQTop_MASK (0x7f << 24)
+#define S3C_GNPTXSTS_NPtxQTop_SHIFT (24)
+
+#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK (0xff << 16)
+#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT (16)
+#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v) (((_v) >> 16) & 0xff)
+
+#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK (0xffff << 0)
+#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT (0)
+#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v) (((_v) >> 0) & 0xffff)
+
+
+#define S3C_HPTXFSIZ S3C_HSOTG_REG(0x100)
+
+#define S3C_DPTXFSIZn(_a) S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4))
+
+#define S3C_DPTXFSIZn_DPTxFSize_MASK (0xffff << 16)
+#define S3C_DPTXFSIZn_DPTxFSize_SHIFT (16)
+#define S3C_DPTXFSIZn_DPTxFSize_GET(_v) (((_v) >> 16) & 0xffff)
+#define S3C_DPTXFSIZn_DPTxFSize_LIMIT (0xffff)
+#define S3C_DPTXFSIZn_DPTxFSize(_x) ((_x) << 16)
+
+#define S3C_DPTXFSIZn_DPTxFStAddr_MASK (0xffff << 0)
+#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT (0)
+
+/* Device mode registers */
+#define S3C_DCFG S3C_HSOTG_REG(0x800)
+
+#define S3C_DCFG_EPMisCnt_MASK (0x1f << 18)
+#define S3C_DCFG_EPMisCnt_SHIFT (18)
+#define S3C_DCFG_EPMisCnt_LIMIT (0x1f)
+#define S3C_DCFG_EPMisCnt(_x) ((_x) << 18)
+
+#define S3C_DCFG_PerFrInt_MASK (0x3 << 11)
+#define S3C_DCFG_PerFrInt_SHIFT (11)
+#define S3C_DCFG_PerFrInt_LIMIT (0x3)
+#define S3C_DCFG_PerFrInt(_x) ((_x) << 11)
+
+#define S3C_DCFG_DevAddr_MASK (0x7f << 4)
+#define S3C_DCFG_DevAddr_SHIFT (4)
+#define S3C_DCFG_DevAddr_LIMIT (0x7f)
+#define S3C_DCFG_DevAddr(_x) ((_x) << 4)
+
+#define S3C_DCFG_NZStsOUTHShk (1 << 2)
+
+#define S3C_DCFG_DevSpd_MASK (0x3 << 0)
+#define S3C_DCFG_DevSpd_SHIFT (0)
+#define S3C_DCFG_DevSpd_HS (0x0 << 0)
+#define S3C_DCFG_DevSpd_FS (0x1 << 0)
+#define S3C_DCFG_DevSpd_LS (0x2 << 0)
+#define S3C_DCFG_DevSpd_FS48 (0x3 << 0)
+
+#define S3C_DCTL S3C_HSOTG_REG(0x804)
+
+#define S3C_DCTL_PWROnPrgDone (1 << 11)
+#define S3C_DCTL_CGOUTNak (1 << 10)
+#define S3C_DCTL_SGOUTNak (1 << 9)
+#define S3C_DCTL_CGNPInNAK (1 << 8)
+#define S3C_DCTL_SGNPInNAK (1 << 7)
+#define S3C_DCTL_TstCtl_MASK (0x7 << 4)
+#define S3C_DCTL_TstCtl_SHIFT (4)
+#define S3C_DCTL_GOUTNakSts (1 << 3)
+#define S3C_DCTL_GNPINNakSts (1 << 2)
+#define S3C_DCTL_SftDiscon (1 << 1)
+#define S3C_DCTL_RmtWkUpSig (1 << 0)
+
+#define S3C_DSTS S3C_HSOTG_REG(0x808)
+
+#define S3C_DSTS_SOFFN_MASK (0x3fff << 8)
+#define S3C_DSTS_SOFFN_SHIFT (8)
+#define S3C_DSTS_SOFFN_LIMIT (0x3fff)
+#define S3C_DSTS_SOFFN(_x) ((_x) << 8)
+#define S3C_DSTS_ErraticErr (1 << 3)
+#define S3C_DSTS_EnumSpd_MASK (0x3 << 1)
+#define S3C_DSTS_EnumSpd_SHIFT (1)
+#define S3C_DSTS_EnumSpd_HS (0x0 << 1)
+#define S3C_DSTS_EnumSpd_FS (0x1 << 1)
+#define S3C_DSTS_EnumSpd_LS (0x2 << 1)
+#define S3C_DSTS_EnumSpd_FS48 (0x3 << 1)
+
+#define S3C_DSTS_SuspSts (1 << 0)
+
+#define S3C_DIEPMSK S3C_HSOTG_REG(0x810)
+
+#define S3C_DIEPMSK_INEPNakEffMsk (1 << 6)
+#define S3C_DIEPMSK_INTknEPMisMsk (1 << 5)
+#define S3C_DIEPMSK_INTknTXFEmpMsk (1 << 4)
+#define S3C_DIEPMSK_TimeOUTMsk (1 << 3)
+#define S3C_DIEPMSK_AHBErrMsk (1 << 2)
+#define S3C_DIEPMSK_EPDisbldMsk (1 << 1)
+#define S3C_DIEPMSK_XferComplMsk (1 << 0)
+
+#define S3C_DOEPMSK S3C_HSOTG_REG(0x814)
+
+#define S3C_DOEPMSK_Back2BackSetup (1 << 6)
+#define S3C_DOEPMSK_OUTTknEPdisMsk (1 << 4)
+#define S3C_DOEPMSK_SetupMsk (1 << 3)
+#define S3C_DOEPMSK_AHBErrMsk (1 << 2)
+#define S3C_DOEPMSK_EPDisbldMsk (1 << 1)
+#define S3C_DOEPMSK_XferComplMsk (1 << 0)
+
+#define S3C_DAINT S3C_HSOTG_REG(0x818)
+#define S3C_DAINTMSK S3C_HSOTG_REG(0x81C)
+
+#define S3C_DAINT_OutEP_SHIFT (16)
+#define S3C_DAINT_OutEP(x) (1 << ((x) + 16))
+#define S3C_DAINT_InEP(x) (1 << (x))
+
+#define S3C_DTKNQR1 S3C_HSOTG_REG(0x820)
+#define S3C_DTKNQR2 S3C_HSOTG_REG(0x824)
+#define S3C_DTKNQR3 S3C_HSOTG_REG(0x830)
+#define S3C_DTKNQR4 S3C_HSOTG_REG(0x834)
+
+#define S3C_DVBUSDIS S3C_HSOTG_REG(0x828)
+#define S3C_DVBUSPULSE S3C_HSOTG_REG(0x82C)
+
+#define S3C_DIEPCTL0 S3C_HSOTG_REG(0x900)
+#define S3C_DOEPCTL0 S3C_HSOTG_REG(0xB00)
+#define S3C_DIEPCTL(_a) S3C_HSOTG_REG(0x900 + ((_a) * 0x20))
+#define S3C_DOEPCTL(_a) S3C_HSOTG_REG(0xB00 + ((_a) * 0x20))
+
+/* EP0 specialness:
+ * bits[29..28] - reserved (no SetD0PID, SetD1PID)
+ * bits[25..22] - should always be zero, this isn't a periodic endpoint
+ * bits[10..0] - MPS setting differenct for EP0
+*/
+#define S3C_D0EPCTL_MPS_MASK (0x3 << 0)
+#define S3C_D0EPCTL_MPS_SHIFT (0)
+#define S3C_D0EPCTL_MPS_64 (0x0 << 0)
+#define S3C_D0EPCTL_MPS_32 (0x1 << 0)
+#define S3C_D0EPCTL_MPS_16 (0x2 << 0)
+#define S3C_D0EPCTL_MPS_8 (0x3 << 0)
+
+#define S3C_DxEPCTL_EPEna (1 << 31)
+#define S3C_DxEPCTL_EPDis (1 << 30)
+#define S3C_DxEPCTL_SetD1PID (1 << 29)
+#define S3C_DxEPCTL_SetOddFr (1 << 29)
+#define S3C_DxEPCTL_SetD0PID (1 << 28)
+#define S3C_DxEPCTL_SetEvenFr (1 << 28)
+#define S3C_DxEPCTL_SNAK (1 << 27)
+#define S3C_DxEPCTL_CNAK (1 << 26)
+#define S3C_DxEPCTL_TxFNum_MASK (0xf << 22)
+#define S3C_DxEPCTL_TxFNum_SHIFT (22)
+#define S3C_DxEPCTL_TxFNum_LIMIT (0xf)
+#define S3C_DxEPCTL_TxFNum(_x) ((_x) << 22)
+
+#define S3C_DxEPCTL_Stall (1 << 21)
+#define S3C_DxEPCTL_Snp (1 << 20)
+#define S3C_DxEPCTL_EPType_MASK (0x3 << 18)
+#define S3C_DxEPCTL_EPType_SHIFT (18)
+#define S3C_DxEPCTL_EPType_Control (0x0 << 18)
+#define S3C_DxEPCTL_EPType_Iso (0x1 << 18)
+#define S3C_DxEPCTL_EPType_Bulk (0x2 << 18)
+#define S3C_DxEPCTL_EPType_Intterupt (0x3 << 18)
+
+#define S3C_DxEPCTL_NAKsts (1 << 17)
+#define S3C_DxEPCTL_DPID (1 << 16)
+#define S3C_DxEPCTL_EOFrNum (1 << 16)
+#define S3C_DxEPCTL_USBActEp (1 << 15)
+#define S3C_DxEPCTL_NextEp_MASK (0xf << 11)
+#define S3C_DxEPCTL_NextEp_SHIFT (11)
+#define S3C_DxEPCTL_NextEp_LIMIT (0xf)
+#define S3C_DxEPCTL_NextEp(_x) ((_x) << 11)
+
+#define S3C_DxEPCTL_MPS_MASK (0x7ff << 0)
+#define S3C_DxEPCTL_MPS_SHIFT (0)
+#define S3C_DxEPCTL_MPS_LIMIT (0x7ff)
+#define S3C_DxEPCTL_MPS(_x) ((_x) << 0)
+
+#define S3C_DIEPINT(_a) S3C_HSOTG_REG(0x908 + ((_a) * 0x20))
+#define S3C_DOEPINT(_a) S3C_HSOTG_REG(0xB08 + ((_a) * 0x20))
+
+#define S3C_DxEPINT_INEPNakEff (1 << 6)
+#define S3C_DxEPINT_Back2BackSetup (1 << 6)
+#define S3C_DxEPINT_INTknEPMis (1 << 5)
+#define S3C_DxEPINT_INTknTXFEmp (1 << 4)
+#define S3C_DxEPINT_OUTTknEPdis (1 << 4)
+#define S3C_DxEPINT_Timeout (1 << 3)
+#define S3C_DxEPINT_Setup (1 << 3)
+#define S3C_DxEPINT_AHBErr (1 << 2)
+#define S3C_DxEPINT_EPDisbld (1 << 1)
+#define S3C_DxEPINT_XferCompl (1 << 0)
+
+#define S3C_DIEPTSIZ0 S3C_HSOTG_REG(0x910)
+
+#define S3C_DIEPTSIZ0_PktCnt_MASK (0x3 << 19)
+#define S3C_DIEPTSIZ0_PktCnt_SHIFT (19)
+#define S3C_DIEPTSIZ0_PktCnt_LIMIT (0x3)
+#define S3C_DIEPTSIZ0_PktCnt(_x) ((_x) << 19)
+
+#define S3C_DIEPTSIZ0_XferSize_MASK (0x7f << 0)
+#define S3C_DIEPTSIZ0_XferSize_SHIFT (0)
+#define S3C_DIEPTSIZ0_XferSize_LIMIT (0x7f)
+#define S3C_DIEPTSIZ0_XferSize(_x) ((_x) << 0)
+
+
+#define DOEPTSIZ0 S3C_HSOTG_REG(0xB10)
+#define S3C_DOEPTSIZ0_SUPCnt_MASK (0x3 << 29)
+#define S3C_DOEPTSIZ0_SUPCnt_SHIFT (29)
+#define S3C_DOEPTSIZ0_SUPCnt_LIMIT (0x3)
+#define S3C_DOEPTSIZ0_SUPCnt(_x) ((_x) << 29)
+
+#define S3C_DOEPTSIZ0_PktCnt (1 << 19)
+#define S3C_DOEPTSIZ0_XferSize_MASK (0x7f << 0)
+#define S3C_DOEPTSIZ0_XferSize_SHIFT (0)
+
+#define S3C_DIEPTSIZ(_a) S3C_HSOTG_REG(0x910 + ((_a) * 0x20))
+#define S3C_DOEPTSIZ(_a) S3C_HSOTG_REG(0xB10 + ((_a) * 0x20))
+
+#define S3C_DxEPTSIZ_MC_MASK (0x3 << 29)
+#define S3C_DxEPTSIZ_MC_SHIFT (29)
+#define S3C_DxEPTSIZ_MC_LIMIT (0x3)
+#define S3C_DxEPTSIZ_MC(_x) ((_x) << 29)
+
+#define S3C_DxEPTSIZ_PktCnt_MASK (0x3ff << 19)
+#define S3C_DxEPTSIZ_PktCnt_SHIFT (19)
+#define S3C_DxEPTSIZ_PktCnt_GET(_v) (((_v) >> 19) & 0x3ff)
+#define S3C_DxEPTSIZ_PktCnt_LIMIT (0x3ff)
+#define S3C_DxEPTSIZ_PktCnt(_x) ((_x) << 19)
+
+#define S3C_DxEPTSIZ_XferSize_MASK (0x7ffff << 0)
+#define S3C_DxEPTSIZ_XferSize_SHIFT (0)
+#define S3C_DxEPTSIZ_XferSize_GET(_v) (((_v) >> 0) & 0x7ffff)
+#define S3C_DxEPTSIZ_XferSize_LIMIT (0x7ffff)
+#define S3C_DxEPTSIZ_XferSize(_x) ((_x) << 0)
+
+
+#define S3C_DIEPDMA(_a) S3C_HSOTG_REG(0x914 + ((_a) * 0x20))
+#define S3C_DOEPDMA(_a) S3C_HSOTG_REG(0xB14 + ((_a) * 0x20))
+
+#define S3C_EPFIFO(_a) S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000))
+
+#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */
diff --git a/arch/avr32/kernel/init_task.c b/arch/avr32/kernel/init_task.c
index 993d56e..57ec9f2 100644
--- a/arch/avr32/kernel/init_task.c
+++ b/arch/avr32/kernel/init_task.c
@@ -15,10 +15,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial thread structure. Must be aligned on an 8192-byte boundary.
*/
diff --git a/arch/blackfin/include/asm/kmap_types.h b/arch/blackfin/include/asm/kmap_types.h
index e215f71..0a88622 100644
--- a/arch/blackfin/include/asm/kmap_types.h
+++ b/arch/blackfin/include/asm/kmap_types.h
@@ -1,21 +1,6 @@
#ifndef _ASM_KMAP_TYPES_H
#define _ASM_KMAP_TYPES_H
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
#endif
diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c
index 2c228c0..c26c34d 100644
--- a/arch/blackfin/kernel/init_task.c
+++ b/arch/blackfin/kernel/init_task.c
@@ -35,10 +35,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-
-struct mm_struct init_mm = INIT_MM(init_mm);
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial task structure.
*
diff --git a/arch/cris/include/asm/kmap_types.h b/arch/cris/include/asm/kmap_types.h
index 492988c..d2d643c 100644
--- a/arch/cris/include/asm/kmap_types.h
+++ b/arch/cris/include/asm/kmap_types.h
@@ -5,21 +5,6 @@
* is actually used on cris.
*/
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
#endif
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index 4df0b32..51dcd04 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -38,10 +38,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial thread structure.
*
diff --git a/arch/frv/kernel/init_task.c b/arch/frv/kernel/init_task.c
index 29429a8..1d3df1d 100644
--- a/arch/frv/kernel/init_task.c
+++ b/arch/frv/kernel/init_task.c
@@ -12,10 +12,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial thread structure.
*
diff --git a/arch/h8300/include/asm/kmap_types.h b/arch/h8300/include/asm/kmap_types.h
index 1ec8a34..be12a71 100644
--- a/arch/h8300/include/asm/kmap_types.h
+++ b/arch/h8300/include/asm/kmap_types.h
@@ -1,21 +1,6 @@
#ifndef _ASM_H8300_KMAP_TYPES_H
#define _ASM_H8300_KMAP_TYPES_H
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
#endif
diff --git a/arch/h8300/kernel/init_task.c b/arch/h8300/kernel/init_task.c
index cb5dc55..089c65e 100644
--- a/arch/h8300/kernel/init_task.c
+++ b/arch/h8300/kernel/init_task.c
@@ -14,10 +14,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial task structure.
*
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 56ceb68..fe63b2dc9 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1131,7 +1131,7 @@
#ifdef CONFIG_NUMA
{
struct page *page;
- page = alloc_pages_node(ioc->node == MAX_NUMNODES ?
+ page = alloc_pages_exact_node(ioc->node == MAX_NUMNODES ?
numa_node_id() : ioc->node, flags,
get_order(size));
diff --git a/arch/ia64/include/asm/kmap_types.h b/arch/ia64/include/asm/kmap_types.h
index 5d1658a..05d5f99 100644
--- a/arch/ia64/include/asm/kmap_types.h
+++ b/arch/ia64/include/asm/kmap_types.h
@@ -1,30 +1,12 @@
#ifndef _ASM_IA64_KMAP_TYPES_H
#define _ASM_IA64_KMAP_TYPES_H
-
#ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define __WITH_KM_FENCE
#endif
-enum km_type {
-D(0) KM_BOUNCE_READ,
-D(1) KM_SKB_SUNRPC_DATA,
-D(2) KM_SKB_DATA_SOFTIRQ,
-D(3) KM_USER0,
-D(4) KM_USER1,
-D(5) KM_BIO_SRC_IRQ,
-D(6) KM_BIO_DST_IRQ,
-D(7) KM_PTE0,
-D(8) KM_PTE1,
-D(9) KM_IRQ0,
-D(10) KM_IRQ1,
-D(11) KM_SOFTIRQ0,
-D(12) KM_SOFTIRQ1,
-D(13) KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
-#undef D
+#undef __WITH_KM_FENCE
#endif /* _ASM_IA64_KMAP_TYPES_H */
diff --git a/arch/ia64/kernel/init_task.c b/arch/ia64/kernel/init_task.c
index 5b0e830..c475fc2 100644
--- a/arch/ia64/kernel/init_task.c
+++ b/arch/ia64/kernel/init_task.c
@@ -19,10 +19,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial task structure.
*
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 8f33a88..5b17bd4 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1829,8 +1829,7 @@
data = mca_bootmem();
first_time = 0;
} else
- data = page_address(alloc_pages_node(numa_node_id(),
- GFP_KERNEL, get_order(sz)));
+ data = __get_free_pages(GFP_KERNEL, get_order(sz));
if (!data)
panic("Could not allocate MCA memory for cpu %d\n",
cpu);
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 8a06dc48..bdc176c 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -5595,7 +5595,7 @@
(*pfm_alt_intr_handler->handler)(irq, arg, regs);
}
- put_cpu_no_resched();
+ put_cpu();
return IRQ_HANDLED;
}
diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c
index 8eff8c1..6ba72ab 100644
--- a/arch/ia64/kernel/uncached.c
+++ b/arch/ia64/kernel/uncached.c
@@ -98,7 +98,8 @@
/* attempt to allocate a granule's worth of cached memory pages */
- page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
+ page = alloc_pages_exact_node(nid,
+ GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
IA64_GRANULE_SHIFT-PAGE_SHIFT);
if (!page) {
mutex_unlock(&uc_pool->add_chunk_mutex);
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index d876423..98b6849 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -90,7 +90,8 @@
*/
node = pcibus_to_node(pdev->bus);
if (likely(node >=0)) {
- struct page *p = alloc_pages_node(node, flags, get_order(size));
+ struct page *p = alloc_pages_exact_node(node,
+ flags, get_order(size));
if (likely(p))
cpuaddr = page_address(p);
diff --git a/arch/m32r/include/asm/kmap_types.h b/arch/m32r/include/asm/kmap_types.h
index fa94dc6..4cdb5e3 100644
--- a/arch/m32r/include/asm/kmap_types.h
+++ b/arch/m32r/include/asm/kmap_types.h
@@ -2,28 +2,11 @@
#define __M32R_KMAP_TYPES_H
#ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define __WITH_KM_FENCE
#endif
-enum km_type {
-D(0) KM_BOUNCE_READ,
-D(1) KM_SKB_SUNRPC_DATA,
-D(2) KM_SKB_DATA_SOFTIRQ,
-D(3) KM_USER0,
-D(4) KM_USER1,
-D(5) KM_BIO_SRC_IRQ,
-D(6) KM_BIO_DST_IRQ,
-D(7) KM_PTE0,
-D(8) KM_PTE1,
-D(9) KM_IRQ0,
-D(10) KM_IRQ1,
-D(11) KM_SOFTIRQ0,
-D(12) KM_SOFTIRQ1,
-D(13) KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
-#undef D
+#undef __WITH_KM_FENCE
#endif /* __M32R_KMAP_TYPES_H */
diff --git a/arch/m32r/kernel/init_task.c b/arch/m32r/kernel/init_task.c
index 016885c..fce57e5 100644
--- a/arch/m32r/kernel/init_task.c
+++ b/arch/m32r/kernel/init_task.c
@@ -13,10 +13,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial thread structure.
*
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index 7daf897..b7a78ad 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -154,9 +154,9 @@
* Use all area of internal RAM.
* see __alloc_pages()
*/
- NODE_DATA(1)->node_zones->pages_min = 0;
- NODE_DATA(1)->node_zones->pages_low = 0;
- NODE_DATA(1)->node_zones->pages_high = 0;
+ NODE_DATA(1)->node_zones->watermark[WMARK_MIN] = 0;
+ NODE_DATA(1)->node_zones->watermark[WMARK_LOW] = 0;
+ NODE_DATA(1)->node_zones->watermark[WMARK_HIGH] = 0;
return holes;
}
diff --git a/arch/m32r/platforms/m32104ut/setup.c b/arch/m32r/platforms/m32104ut/setup.c
index 98138b4..922fdfd 100644
--- a/arch/m32r/platforms/m32104ut/setup.c
+++ b/arch/m32r/platforms/m32104ut/setup.c
@@ -63,7 +63,7 @@
outl(M32R_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type m32104ut_irq_type =
+static struct irq_chip m32104ut_irq_type =
{
.typename = "M32104UT-IRQ",
.startup = startup_m32104ut_irq,
diff --git a/arch/m32r/platforms/m32700ut/setup.c b/arch/m32r/platforms/m32700ut/setup.c
index 77b0ae9..9c1bc74 100644
--- a/arch/m32r/platforms/m32700ut/setup.c
+++ b/arch/m32r/platforms/m32700ut/setup.c
@@ -69,7 +69,7 @@
outl(M32R_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type m32700ut_irq_type =
+static struct irq_chip m32700ut_irq_type =
{
.typename = "M32700UT-IRQ",
.startup = startup_m32700ut_irq,
@@ -146,7 +146,7 @@
outw(PLD_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type m32700ut_pld_irq_type =
+static struct irq_chip m32700ut_pld_irq_type =
{
.typename = "M32700UT-PLD-IRQ",
.startup = startup_m32700ut_pld_irq,
@@ -215,7 +215,7 @@
outw(PLD_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type m32700ut_lanpld_irq_type =
+static struct irq_chip m32700ut_lanpld_irq_type =
{
.typename = "M32700UT-PLD-LAN-IRQ",
.startup = startup_m32700ut_lanpld_irq,
@@ -284,7 +284,7 @@
outw(PLD_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type m32700ut_lcdpld_irq_type =
+static struct irq_chip m32700ut_lcdpld_irq_type =
{
.typename = "M32700UT-PLD-LCD-IRQ",
.startup = startup_m32700ut_lcdpld_irq,
diff --git a/arch/m32r/platforms/mappi/setup.c b/arch/m32r/platforms/mappi/setup.c
index 3ec087f..fb4b177 100644
--- a/arch/m32r/platforms/mappi/setup.c
+++ b/arch/m32r/platforms/mappi/setup.c
@@ -63,7 +63,7 @@
outl(M32R_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type mappi_irq_type =
+static struct irq_chip mappi_irq_type =
{
.typename = "MAPPI-IRQ",
.startup = startup_mappi_irq,
diff --git a/arch/m32r/platforms/mappi2/setup.c b/arch/m32r/platforms/mappi2/setup.c
index d87969c..6a65eda 100644
--- a/arch/m32r/platforms/mappi2/setup.c
+++ b/arch/m32r/platforms/mappi2/setup.c
@@ -70,7 +70,7 @@
outl(M32R_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type mappi2_irq_type =
+static struct irq_chip mappi2_irq_type =
{
.typename = "MAPPI2-IRQ",
.startup = startup_mappi2_irq,
diff --git a/arch/m32r/platforms/mappi3/setup.c b/arch/m32r/platforms/mappi3/setup.c
index 785b4bd..9c337ae 100644
--- a/arch/m32r/platforms/mappi3/setup.c
+++ b/arch/m32r/platforms/mappi3/setup.c
@@ -70,7 +70,7 @@
outl(M32R_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type mappi3_irq_type =
+static struct irq_chip mappi3_irq_type =
{
.typename = "MAPPI3-IRQ",
.startup = startup_mappi3_irq,
diff --git a/arch/m32r/platforms/oaks32r/setup.c b/arch/m32r/platforms/oaks32r/setup.c
index 6faa5db..ed86574 100644
--- a/arch/m32r/platforms/oaks32r/setup.c
+++ b/arch/m32r/platforms/oaks32r/setup.c
@@ -61,7 +61,7 @@
outl(M32R_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type oaks32r_irq_type =
+static struct irq_chip oaks32r_irq_type =
{
.typename = "OAKS32R-IRQ",
.startup = startup_oaks32r_irq,
diff --git a/arch/m32r/platforms/opsput/setup.c b/arch/m32r/platforms/opsput/setup.c
index fab13fd..80d6806 100644
--- a/arch/m32r/platforms/opsput/setup.c
+++ b/arch/m32r/platforms/opsput/setup.c
@@ -70,7 +70,7 @@
outl(M32R_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type opsput_irq_type =
+static struct irq_chip opsput_irq_type =
{
.typename = "OPSPUT-IRQ",
.startup = startup_opsput_irq,
@@ -147,7 +147,7 @@
outw(PLD_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type opsput_pld_irq_type =
+static struct irq_chip opsput_pld_irq_type =
{
.typename = "OPSPUT-PLD-IRQ",
.startup = startup_opsput_pld_irq,
@@ -216,7 +216,7 @@
outw(PLD_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type opsput_lanpld_irq_type =
+static struct irq_chip opsput_lanpld_irq_type =
{
.typename = "OPSPUT-PLD-LAN-IRQ",
.startup = startup_opsput_lanpld_irq,
@@ -285,7 +285,7 @@
outw(PLD_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type opsput_lcdpld_irq_type =
+static struct irq_chip opsput_lcdpld_irq_type =
{
"OPSPUT-PLD-LCD-IRQ",
startup_opsput_lcdpld_irq,
diff --git a/arch/m32r/platforms/usrv/setup.c b/arch/m32r/platforms/usrv/setup.c
index 89588d6..7573026 100644
--- a/arch/m32r/platforms/usrv/setup.c
+++ b/arch/m32r/platforms/usrv/setup.c
@@ -61,7 +61,7 @@
outl(M32R_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type mappi_irq_type =
+static struct irq_chip mappi_irq_type =
{
.typename = "M32700-IRQ",
.startup = startup_mappi_irq,
@@ -134,7 +134,7 @@
outw(PLD_ICUCR_ILEVEL7, port);
}
-static struct hw_interrupt_type m32700ut_pld_irq_type =
+static struct irq_chip m32700ut_pld_irq_type =
{
.typename = "USRV-PLD-IRQ",
.startup = startup_m32700ut_pld_irq,
diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h
index c843c63..3413cc1 100644
--- a/arch/m68k/include/asm/kmap_types.h
+++ b/arch/m68k/include/asm/kmap_types.h
@@ -1,21 +1,6 @@
#ifndef __ASM_M68K_KMAP_TYPES_H
#define __ASM_M68K_KMAP_TYPES_H
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
#endif /* __ASM_M68K_KMAP_TYPES_H */
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index ec37fb56..72bad65 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -42,10 +42,6 @@
*/
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
union thread_union init_thread_union
__attribute__((section(".data.init_task"), aligned(THREAD_SIZE)))
= { INIT_THREAD_INFO(init_task) };
diff --git a/arch/m68knommu/kernel/init_task.c b/arch/m68knommu/kernel/init_task.c
index fe282de..45e97a2 100644
--- a/arch/m68knommu/kernel/init_task.c
+++ b/arch/m68knommu/kernel/init_task.c
@@ -14,10 +14,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial task structure.
*
diff --git a/arch/microblaze/include/asm/kmap_types.h b/arch/microblaze/include/asm/kmap_types.h
index 4d7e222..2597525 100644
--- a/arch/microblaze/include/asm/kmap_types.h
+++ b/arch/microblaze/include/asm/kmap_types.h
@@ -1,29 +1,6 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
#ifndef _ASM_MICROBLAZE_KMAP_TYPES_H
#define _ASM_MICROBLAZE_KMAP_TYPES_H
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR,
-};
+#include <asm-generic/kmap_types.h>
#endif /* _ASM_MICROBLAZE_KMAP_TYPES_H */
diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h
index 5dabc87..032ca73 100644
--- a/arch/mips/include/asm/i8253.h
+++ b/arch/mips/include/asm/i8253.h
@@ -12,8 +12,6 @@
#define PIT_CH0 0x40
#define PIT_CH2 0x42
-#define PIT_TICK_RATE 1193182UL
-
extern spinlock_t i8253_lock;
extern void setup_pit_timer(void);
diff --git a/arch/mips/include/asm/kmap_types.h b/arch/mips/include/asm/kmap_types.h
index 806aae3..58e91ed 100644
--- a/arch/mips/include/asm/kmap_types.h
+++ b/arch/mips/include/asm/kmap_types.h
@@ -1,30 +1,12 @@
#ifndef _ASM_KMAP_TYPES_H
#define _ASM_KMAP_TYPES_H
-
#ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define __WITH_KM_FENCE
#endif
-enum km_type {
-D(0) KM_BOUNCE_READ,
-D(1) KM_SKB_SUNRPC_DATA,
-D(2) KM_SKB_DATA_SOFTIRQ,
-D(3) KM_USER0,
-D(4) KM_USER1,
-D(5) KM_BIO_SRC_IRQ,
-D(6) KM_BIO_DST_IRQ,
-D(7) KM_PTE0,
-D(8) KM_PTE1,
-D(9) KM_IRQ0,
-D(10) KM_IRQ1,
-D(11) KM_SOFTIRQ0,
-D(12) KM_SOFTIRQ1,
-D(13) KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
-#undef D
+#undef __WITH_KM_FENCE
#endif
diff --git a/arch/mips/kernel/init_task.c b/arch/mips/kernel/init_task.c
index 149cd91..5b457a4 100644
--- a/arch/mips/kernel/init_task.c
+++ b/arch/mips/kernel/init_task.c
@@ -11,10 +11,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial thread structure.
*
diff --git a/arch/mips/sni/eisa.c b/arch/mips/sni/eisa.c
index 7396cd7..6827feb 100644
--- a/arch/mips/sni/eisa.c
+++ b/arch/mips/sni/eisa.c
@@ -38,7 +38,7 @@
if (!r)
return r;
- eisa_root_dev.dev.driver_data = &eisa_bus_root;
+ dev_set_drvdata(&eisa_root_dev.dev, &eisa_bus_root);
if (eisa_root_register(&eisa_bus_root)) {
/* A real bridge may have been registered before
diff --git a/arch/mn10300/include/asm/kmap_types.h b/arch/mn10300/include/asm/kmap_types.h
index 3398f9f..76d093b 100644
--- a/arch/mn10300/include/asm/kmap_types.h
+++ b/arch/mn10300/include/asm/kmap_types.h
@@ -1,31 +1,6 @@
-/* MN10300 kmap_atomic() slot IDs
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
#ifndef _ASM_KMAP_TYPES_H
#define _ASM_KMAP_TYPES_H
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
#endif /* _ASM_KMAP_TYPES_H */
diff --git a/arch/mn10300/kernel/init_task.c b/arch/mn10300/kernel/init_task.c
index 5ac3566..80d423b 100644
--- a/arch/mn10300/kernel/init_task.c
+++ b/arch/mn10300/kernel/init_task.c
@@ -20,9 +20,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial thread structure.
*
diff --git a/arch/parisc/include/asm/kmap_types.h b/arch/parisc/include/asm/kmap_types.h
index 806aae3..58e91ed 100644
--- a/arch/parisc/include/asm/kmap_types.h
+++ b/arch/parisc/include/asm/kmap_types.h
@@ -1,30 +1,12 @@
#ifndef _ASM_KMAP_TYPES_H
#define _ASM_KMAP_TYPES_H
-
#ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define __WITH_KM_FENCE
#endif
-enum km_type {
-D(0) KM_BOUNCE_READ,
-D(1) KM_SKB_SUNRPC_DATA,
-D(2) KM_SKB_DATA_SOFTIRQ,
-D(3) KM_USER0,
-D(4) KM_USER1,
-D(5) KM_BIO_SRC_IRQ,
-D(6) KM_BIO_DST_IRQ,
-D(7) KM_PTE0,
-D(8) KM_PTE1,
-D(9) KM_IRQ0,
-D(10) KM_IRQ1,
-D(11) KM_SOFTIRQ0,
-D(12) KM_SOFTIRQ1,
-D(13) KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
-#undef D
+#undef __WITH_KM_FENCE
#endif
diff --git a/arch/parisc/kernel/init_task.c b/arch/parisc/kernel/init_task.c
index 1e25a45..82974b2 100644
--- a/arch/parisc/kernel/init_task.c
+++ b/arch/parisc/kernel/init_task.c
@@ -36,10 +36,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial task structure.
*
diff --git a/arch/powerpc/include/asm/8253pit.h b/arch/powerpc/include/asm/8253pit.h
index b70d6e5..a71c9c1 100644
--- a/arch/powerpc/include/asm/8253pit.h
+++ b/arch/powerpc/include/asm/8253pit.h
@@ -1,10 +1,3 @@
-#ifndef _ASM_POWERPC_8253PIT_H
-#define _ASM_POWERPC_8253PIT_H
-
/*
* 8253/8254 Programmable Interval Timer
*/
-
-#define PIT_TICK_RATE 1193182UL
-
-#endif /* _ASM_POWERPC_8253PIT_H */
diff --git a/arch/powerpc/kernel/init_task.c b/arch/powerpc/kernel/init_task.c
index 688b329..ffc4253 100644
--- a/arch/powerpc/kernel/init_task.c
+++ b/arch/powerpc/kernel/init_task.c
@@ -9,10 +9,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial thread structure.
*
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 2f0e64b..ef6f649 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -44,10 +44,7 @@
#include <asm/sections.h>
#include <asm/machdep.h>
-#ifdef CONFIG_LOGO_LINUX_CLUT224
#include <linux/linux_logo.h>
-extern const struct linux_logo logo_linux_clut224;
-#endif
/*
* Properties whose value is longer than this get excluded from our
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 296b526..5e0a191 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -122,8 +122,8 @@
area->nid = nid;
area->order = order;
- area->pages = alloc_pages_node(area->nid, GFP_KERNEL | GFP_THISNODE,
- area->order);
+ area->pages = alloc_pages_exact_node(area->nid, GFP_KERNEL|GFP_THISNODE,
+ area->order);
if (!area->pages) {
printk(KERN_WARNING "%s: no page on node %d\n",
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 9abd210..8547e86 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -752,17 +752,8 @@
goto out_unregister_sysdev_class;
}
- if (ret > 0) {
- /*
- * We cannot put the forward declaration in
- * <linux/linux_logo.h> because of conflicting session type
- * conflicts for const and __initdata with different compiler
- * versions
- */
- extern const struct linux_logo logo_spe_clut224;
-
+ if (ret > 0)
fb_append_extra_logo(&logo_spe_clut224, ret);
- }
mutex_lock(&spu_full_list_mutex);
xmon_register_spus(&spu_full_list);
diff --git a/arch/s390/include/asm/kmap_types.h b/arch/s390/include/asm/kmap_types.h
index fd15746..94ec3ee 100644
--- a/arch/s390/include/asm/kmap_types.h
+++ b/arch/s390/include/asm/kmap_types.h
@@ -2,22 +2,7 @@
#ifndef _ASM_KMAP_TYPES_H
#define _ASM_KMAP_TYPES_H
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
#endif
#endif /* __KERNEL__ */
diff --git a/arch/s390/kernel/init_task.c b/arch/s390/kernel/init_task.c
index 7db95c0..fe787f9 100644
--- a/arch/s390/kernel/init_task.c
+++ b/arch/s390/kernel/init_task.c
@@ -18,10 +18,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial thread structure.
*
diff --git a/arch/sh/include/asm/kmap_types.h b/arch/sh/include/asm/kmap_types.h
index 84d565c..5962b08 100644
--- a/arch/sh/include/asm/kmap_types.h
+++ b/arch/sh/include/asm/kmap_types.h
@@ -3,30 +3,12 @@
/* Dummy header just to define km_type. */
-
#ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define __WITH_KM_FENCE
#endif
-enum km_type {
-D(0) KM_BOUNCE_READ,
-D(1) KM_SKB_SUNRPC_DATA,
-D(2) KM_SKB_DATA_SOFTIRQ,
-D(3) KM_USER0,
-D(4) KM_USER1,
-D(5) KM_BIO_SRC_IRQ,
-D(6) KM_BIO_DST_IRQ,
-D(7) KM_PTE0,
-D(8) KM_PTE1,
-D(9) KM_IRQ0,
-D(10) KM_IRQ1,
-D(11) KM_SOFTIRQ0,
-D(12) KM_SOFTIRQ1,
-D(13) KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
-#undef D
+#undef __WITH_KM_FENCE
#endif
diff --git a/arch/sh/kernel/init_task.c b/arch/sh/kernel/init_task.c
index 80c35ff..1719957 100644
--- a/arch/sh/kernel/init_task.c
+++ b/arch/sh/kernel/init_task.c
@@ -10,9 +10,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct pt_regs fake_swapper_regs;
-struct mm_struct init_mm = INIT_MM(init_mm);
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial thread structure.
*
diff --git a/arch/sparc/include/asm/kmap_types.h b/arch/sparc/include/asm/kmap_types.h
index 602f5e0..aad2174 100644
--- a/arch/sparc/include/asm/kmap_types.h
+++ b/arch/sparc/include/asm/kmap_types.h
@@ -5,21 +5,6 @@
* is actually used on sparc. -DaveM
*/
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
#endif
diff --git a/arch/sparc/kernel/init_task.c b/arch/sparc/kernel/init_task.c
index f28cb82..28125c5 100644
--- a/arch/sparc/kernel/init_task.c
+++ b/arch/sparc/kernel/init_task.c
@@ -10,10 +10,7 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
struct task_struct init_task = INIT_TASK(init_task);
-
-EXPORT_SYMBOL(init_mm);
EXPORT_SYMBOL(init_task);
/* .text section in head.S is aligned at 8k boundary and this gets linked
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 434ba12..3b44b47 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -360,7 +360,7 @@
static void net_device_release(struct device *dev)
{
- struct uml_net *device = dev->driver_data;
+ struct uml_net *device = dev_get_drvdata(dev);
struct net_device *netdev = device->dev;
struct uml_net_private *lp = netdev_priv(netdev);
@@ -440,7 +440,7 @@
device->pdev.id = n;
device->pdev.name = DRIVER_NAME;
device->pdev.dev.release = net_device_release;
- device->pdev.dev.driver_data = device;
+ dev_set_drvdata(&device->pdev.dev, device);
if (platform_device_register(&device->pdev))
goto out_free_netdev;
SET_NETDEV_DEV(dev,&device->pdev.dev);
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index aa9e926..8f05d4d 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -778,7 +778,7 @@
static void ubd_device_release(struct device *dev)
{
- struct ubd *ubd_dev = dev->driver_data;
+ struct ubd *ubd_dev = dev_get_drvdata(dev);
blk_cleanup_queue(ubd_dev->queue);
*ubd_dev = ((struct ubd) DEFAULT_UBD);
@@ -807,7 +807,7 @@
ubd_devs[unit].pdev.id = unit;
ubd_devs[unit].pdev.name = DRIVER_NAME;
ubd_devs[unit].pdev.dev.release = ubd_device_release;
- ubd_devs[unit].pdev.dev.driver_data = &ubd_devs[unit];
+ dev_set_drvdata(&ubd_devs[unit].pdev.dev, &ubd_devs[unit]);
platform_device_register(&ubd_devs[unit].pdev);
disk->driverfs_dev = &ubd_devs[unit].pdev.dev;
}
diff --git a/arch/um/include/shared/init.h b/arch/um/include/shared/init.h
index 37dd097..b3906f8 100644
--- a/arch/um/include/shared/init.h
+++ b/arch/um/include/shared/init.h
@@ -27,7 +27,7 @@
* sign followed by value, e.g.:
*
* static int init_variable __initdata = 0;
- * static char linux_logo[] __initdata = { 0x32, 0x36, ... };
+ * static const char linux_logo[] __initconst = { 0x32, 0x36, ... };
*
* Don't forget to initialize data not at file scope, i.e. within a function,
* as gcc otherwise puts the data into the bss section and not into the init
diff --git a/arch/um/include/shared/net_user.h b/arch/um/include/shared/net_user.h
index 63bee15..3dabbe1 100644
--- a/arch/um/include/shared/net_user.h
+++ b/arch/um/include/shared/net_user.h
@@ -8,7 +8,7 @@
#define ETH_ADDR_LEN (6)
#define ETH_HEADER_ETHERTAP (16)
-#define ETH_HEADER_OTHER (14)
+#define ETH_HEADER_OTHER (26) /* 14 for ethernet + VLAN + MPLS for crazy people */
#define ETH_MAX_PACKET (1500)
#define UML_NET_VERSION (4)
diff --git a/arch/um/kernel/init_task.c b/arch/um/kernel/init_task.c
index 806d381..b25121b 100644
--- a/arch/um/kernel/init_task.c
+++ b/arch/um/kernel/init_task.c
@@ -10,11 +10,8 @@
#include "linux/mqueue.h"
#include "asm/uaccess.h"
-struct mm_struct init_mm = INIT_MM(init_mm);
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-EXPORT_SYMBOL(init_mm);
-
/*
* Initial task structure.
*
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 336b615..454cdb4 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -358,7 +358,7 @@
EXPORT_SYMBOL(reactivate_fd);
/*
- * hw_interrupt_type must define (startup || enable) &&
+ * irq_chip must define (startup || enable) &&
* (shutdown || disable) && end
*/
static void dummy(unsigned int irq)
@@ -366,7 +366,7 @@
}
/* This is used for everything else than the timer. */
-static struct hw_interrupt_type normal_irq_type = {
+static struct irq_chip normal_irq_type = {
.typename = "SIGIO",
.release = free_irq_by_irq_and_dev,
.disable = dummy,
@@ -375,7 +375,7 @@
.end = dummy
};
-static struct hw_interrupt_type SIGVTALRM_irq_type = {
+static struct irq_chip SIGVTALRM_irq_type = {
.typename = "SIGVTALRM",
.release = free_irq_by_irq_and_dev,
.shutdown = dummy, /* never called */
diff --git a/arch/um/sys-i386/stub.S b/arch/um/sys-i386/stub.S
index c41b04b..54a36ec 100644
--- a/arch/um/sys-i386/stub.S
+++ b/arch/um/sys-i386/stub.S
@@ -1,7 +1,7 @@
#include "as-layout.h"
.globl syscall_stub
-.section .__syscall_stub, "x"
+.section .__syscall_stub, "ax"
.globl batch_syscall_stub
batch_syscall_stub:
diff --git a/arch/um/sys-x86_64/asm/elf.h b/arch/um/sys-x86_64/asm/elf.h
index 6e8a919..04b9e87 100644
--- a/arch/um/sys-x86_64/asm/elf.h
+++ b/arch/um/sys-x86_64/asm/elf.h
@@ -66,28 +66,28 @@
PT_REGS_R15(regs) = 0; \
} while (0)
-#define ELF_CORE_COPY_REGS(pr_reg, regs) \
- (pr_reg)[0] = (regs)->regs.gp[0]; \
- (pr_reg)[1] = (regs)->regs.gp[1]; \
- (pr_reg)[2] = (regs)->regs.gp[2]; \
- (pr_reg)[3] = (regs)->regs.gp[3]; \
- (pr_reg)[4] = (regs)->regs.gp[4]; \
- (pr_reg)[5] = (regs)->regs.gp[5]; \
- (pr_reg)[6] = (regs)->regs.gp[6]; \
- (pr_reg)[7] = (regs)->regs.gp[7]; \
- (pr_reg)[8] = (regs)->regs.gp[8]; \
- (pr_reg)[9] = (regs)->regs.gp[9]; \
- (pr_reg)[10] = (regs)->regs.gp[10]; \
- (pr_reg)[11] = (regs)->regs.gp[11]; \
- (pr_reg)[12] = (regs)->regs.gp[12]; \
- (pr_reg)[13] = (regs)->regs.gp[13]; \
- (pr_reg)[14] = (regs)->regs.gp[14]; \
- (pr_reg)[15] = (regs)->regs.gp[15]; \
- (pr_reg)[16] = (regs)->regs.gp[16]; \
- (pr_reg)[17] = (regs)->regs.gp[17]; \
- (pr_reg)[18] = (regs)->regs.gp[18]; \
- (pr_reg)[19] = (regs)->regs.gp[19]; \
- (pr_reg)[20] = (regs)->regs.gp[20]; \
+#define ELF_CORE_COPY_REGS(pr_reg, _regs) \
+ (pr_reg)[0] = (_regs)->regs.gp[0]; \
+ (pr_reg)[1] = (_regs)->regs.gp[1]; \
+ (pr_reg)[2] = (_regs)->regs.gp[2]; \
+ (pr_reg)[3] = (_regs)->regs.gp[3]; \
+ (pr_reg)[4] = (_regs)->regs.gp[4]; \
+ (pr_reg)[5] = (_regs)->regs.gp[5]; \
+ (pr_reg)[6] = (_regs)->regs.gp[6]; \
+ (pr_reg)[7] = (_regs)->regs.gp[7]; \
+ (pr_reg)[8] = (_regs)->regs.gp[8]; \
+ (pr_reg)[9] = (_regs)->regs.gp[9]; \
+ (pr_reg)[10] = (_regs)->regs.gp[10]; \
+ (pr_reg)[11] = (_regs)->regs.gp[11]; \
+ (pr_reg)[12] = (_regs)->regs.gp[12]; \
+ (pr_reg)[13] = (_regs)->regs.gp[13]; \
+ (pr_reg)[14] = (_regs)->regs.gp[14]; \
+ (pr_reg)[15] = (_regs)->regs.gp[15]; \
+ (pr_reg)[16] = (_regs)->regs.gp[16]; \
+ (pr_reg)[17] = (_regs)->regs.gp[17]; \
+ (pr_reg)[18] = (_regs)->regs.gp[18]; \
+ (pr_reg)[19] = (_regs)->regs.gp[19]; \
+ (pr_reg)[20] = (_regs)->regs.gp[20]; \
(pr_reg)[21] = current->thread.arch.fs; \
(pr_reg)[22] = 0; \
(pr_reg)[23] = 0; \
diff --git a/arch/um/sys-x86_64/stub.S b/arch/um/sys-x86_64/stub.S
index 6d9edf9..20e4a96 100644
--- a/arch/um/sys-x86_64/stub.S
+++ b/arch/um/sys-x86_64/stub.S
@@ -1,7 +1,7 @@
#include "as-layout.h"
.globl syscall_stub
-.section .__syscall_stub, "x"
+.section .__syscall_stub, "ax"
syscall_stub:
syscall
/* We don't have 64-bit constants, so this constructs the address
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 356d2ec..cf42fc3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -46,6 +46,7 @@
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
+ select HAVE_ARCH_KMEMCHECK
config OUTPUT_FORMAT
string
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index edbd0ca..1b68659 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -81,6 +81,11 @@
endif
endif
+# Don't unroll struct assignments with kmemcheck enabled
+ifeq ($(CONFIG_KMEMCHECK),y)
+ KBUILD_CFLAGS += $(call cc-option,-fno-builtin-memcpy)
+endif
+
# Stackpointer is addressed different for 32 bit and 64 bit x86
sp-$(CONFIG_X86_32) := esp
sp-$(CONFIG_X86_64) := rsp
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index f82fdc4..b93405b 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -6,6 +6,7 @@
* Documentation/DMA-API.txt for documentation.
*/
+#include <linux/kmemcheck.h>
#include <linux/scatterlist.h>
#include <linux/dma-debug.h>
#include <linux/dma-attrs.h>
@@ -60,6 +61,7 @@
dma_addr_t addr;
BUG_ON(!valid_dma_direction(dir));
+ kmemcheck_mark_initialized(ptr, size);
addr = ops->map_page(hwdev, virt_to_page(ptr),
(unsigned long)ptr & ~PAGE_MASK, size,
dir, NULL);
@@ -87,8 +89,12 @@
{
struct dma_map_ops *ops = get_dma_ops(hwdev);
int ents;
+ struct scatterlist *s;
+ int i;
BUG_ON(!valid_dma_direction(dir));
+ for_each_sg(sg, s, nents, i)
+ kmemcheck_mark_initialized(sg_virt(s), s->length);
ents = ops->map_sg(hwdev, sg, nents, dir, NULL);
debug_dma_map_sg(hwdev, sg, nents, ents, dir);
@@ -200,6 +206,7 @@
dma_addr_t addr;
BUG_ON(!valid_dma_direction(dir));
+ kmemcheck_mark_initialized(page_address(page) + offset, size);
addr = ops->map_page(dev, page, offset, size, dir, NULL);
debug_dma_map_page(dev, page, offset, size, dir, addr, false);
diff --git a/arch/x86/include/asm/kmap_types.h b/arch/x86/include/asm/kmap_types.h
index 5759c16..9e00a73 100644
--- a/arch/x86/include/asm/kmap_types.h
+++ b/arch/x86/include/asm/kmap_types.h
@@ -2,28 +2,11 @@
#define _ASM_X86_KMAP_TYPES_H
#if defined(CONFIG_X86_32) && defined(CONFIG_DEBUG_HIGHMEM)
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define __WITH_KM_FENCE
#endif
-enum km_type {
-D(0) KM_BOUNCE_READ,
-D(1) KM_SKB_SUNRPC_DATA,
-D(2) KM_SKB_DATA_SOFTIRQ,
-D(3) KM_USER0,
-D(4) KM_USER1,
-D(5) KM_BIO_SRC_IRQ,
-D(6) KM_BIO_DST_IRQ,
-D(7) KM_PTE0,
-D(8) KM_PTE1,
-D(9) KM_IRQ0,
-D(10) KM_IRQ1,
-D(11) KM_SOFTIRQ0,
-D(12) KM_SOFTIRQ1,
-D(13) KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
-#undef D
+#undef __WITH_KM_FENCE
#endif /* _ASM_X86_KMAP_TYPES_H */
diff --git a/arch/x86/include/asm/kmemcheck.h b/arch/x86/include/asm/kmemcheck.h
new file mode 100644
index 0000000..ed01518
--- /dev/null
+++ b/arch/x86/include/asm/kmemcheck.h
@@ -0,0 +1,42 @@
+#ifndef ASM_X86_KMEMCHECK_H
+#define ASM_X86_KMEMCHECK_H
+
+#include <linux/types.h>
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_KMEMCHECK
+bool kmemcheck_active(struct pt_regs *regs);
+
+void kmemcheck_show(struct pt_regs *regs);
+void kmemcheck_hide(struct pt_regs *regs);
+
+bool kmemcheck_fault(struct pt_regs *regs,
+ unsigned long address, unsigned long error_code);
+bool kmemcheck_trap(struct pt_regs *regs);
+#else
+static inline bool kmemcheck_active(struct pt_regs *regs)
+{
+ return false;
+}
+
+static inline void kmemcheck_show(struct pt_regs *regs)
+{
+}
+
+static inline void kmemcheck_hide(struct pt_regs *regs)
+{
+}
+
+static inline bool kmemcheck_fault(struct pt_regs *regs,
+ unsigned long address, unsigned long error_code)
+{
+ return false;
+}
+
+static inline bool kmemcheck_trap(struct pt_regs *regs)
+{
+ return false;
+}
+#endif /* CONFIG_KMEMCHECK */
+
+#endif
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 18ef7eb..3cc06e3 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -317,6 +317,11 @@
return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE);
}
+static inline int pte_hidden(pte_t pte)
+{
+ return pte_flags(pte) & _PAGE_HIDDEN;
+}
+
static inline int pmd_present(pmd_t pmd)
{
return pmd_flags(pmd) & _PAGE_PRESENT;
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 4d258ad..54cb697 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -18,7 +18,7 @@
#define _PAGE_BIT_GLOBAL 8 /* Global TLB entry PPro+ */
#define _PAGE_BIT_UNUSED1 9 /* available for programmer */
#define _PAGE_BIT_IOMAP 10 /* flag used to indicate IO mapping */
-#define _PAGE_BIT_UNUSED3 11
+#define _PAGE_BIT_HIDDEN 11 /* hidden by kmemcheck */
#define _PAGE_BIT_PAT_LARGE 12 /* On 2MB or 1GB pages */
#define _PAGE_BIT_SPECIAL _PAGE_BIT_UNUSED1
#define _PAGE_BIT_CPA_TEST _PAGE_BIT_UNUSED1
@@ -41,13 +41,18 @@
#define _PAGE_GLOBAL (_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)
#define _PAGE_UNUSED1 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1)
#define _PAGE_IOMAP (_AT(pteval_t, 1) << _PAGE_BIT_IOMAP)
-#define _PAGE_UNUSED3 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3)
#define _PAGE_PAT (_AT(pteval_t, 1) << _PAGE_BIT_PAT)
#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
#define _PAGE_SPECIAL (_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
#define _PAGE_CPA_TEST (_AT(pteval_t, 1) << _PAGE_BIT_CPA_TEST)
#define __HAVE_ARCH_PTE_SPECIAL
+#ifdef CONFIG_KMEMCHECK
+#define _PAGE_HIDDEN (_AT(pteval_t, 1) << _PAGE_BIT_HIDDEN)
+#else
+#define _PAGE_HIDDEN (_AT(pteval_t, 0))
+#endif
+
#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
#define _PAGE_NX (_AT(pteval_t, 1) << _PAGE_BIT_NX)
#else
diff --git a/arch/x86/include/asm/string_32.h b/arch/x86/include/asm/string_32.h
index 0e0e3ba..c86f452 100644
--- a/arch/x86/include/asm/string_32.h
+++ b/arch/x86/include/asm/string_32.h
@@ -177,10 +177,18 @@
* No 3D Now!
*/
+#ifndef CONFIG_KMEMCHECK
#define memcpy(t, f, n) \
(__builtin_constant_p((n)) \
? __constant_memcpy((t), (f), (n)) \
: __memcpy((t), (f), (n)))
+#else
+/*
+ * kmemcheck becomes very happy if we use the REP instructions unconditionally,
+ * because it means that we know both memory operands in advance.
+ */
+#define memcpy(t, f, n) __memcpy((t), (f), (n))
+#endif
#endif
diff --git a/arch/x86/include/asm/string_64.h b/arch/x86/include/asm/string_64.h
index 2afe164..19e2c46 100644
--- a/arch/x86/include/asm/string_64.h
+++ b/arch/x86/include/asm/string_64.h
@@ -27,6 +27,7 @@
function. */
#define __HAVE_ARCH_MEMCPY 1
+#ifndef CONFIG_KMEMCHECK
#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
extern void *memcpy(void *to, const void *from, size_t len);
#else
@@ -42,6 +43,13 @@
__ret; \
})
#endif
+#else
+/*
+ * kmemcheck becomes very happy if we use the REP instructions unconditionally,
+ * because it means that we know both memory operands in advance.
+ */
+#define memcpy(dst, src, len) __inline_memcpy((dst), (src), (len))
+#endif
#define __HAVE_ARCH_MEMSET
void *memset(void *s, int c, size_t n);
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 602c769..b078352 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -154,9 +154,9 @@
/* thread information allocation */
#ifdef CONFIG_DEBUG_STACK_USAGE
-#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO)
+#define THREAD_FLAGS (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO)
#else
-#define THREAD_FLAGS GFP_KERNEL
+#define THREAD_FLAGS (GFP_KERNEL | __GFP_NOTRACK)
#endif
#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
diff --git a/arch/x86/include/asm/timex.h b/arch/x86/include/asm/timex.h
index b5c9d45..1375cfc 100644
--- a/arch/x86/include/asm/timex.h
+++ b/arch/x86/include/asm/timex.h
@@ -4,9 +4,7 @@
#include <asm/processor.h>
#include <asm/tsc.h>
-/* The PIT ticks at this frequency (in HZ): */
-#define PIT_TICK_RATE 1193182
-
+/* Assume we use the PIT time source for the clock tick */
#define CLOCK_TICK_RATE PIT_TICK_RATE
#define ARCH_HAS_READ_CURRENT_TIMER
diff --git a/arch/x86/include/asm/xor.h b/arch/x86/include/asm/xor.h
index 11b3bb8..7fcf6f3 100644
--- a/arch/x86/include/asm/xor.h
+++ b/arch/x86/include/asm/xor.h
@@ -1,5 +1,10 @@
+#ifdef CONFIG_KMEMCHECK
+/* kmemcheck doesn't handle MMX/SSE/SSE2 instructions */
+# include <asm-generic/xor.h>
+#else
#ifdef CONFIG_X86_32
# include "xor_32.h"
#else
# include "xor_64.h"
#endif
+#endif
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 3ffdcfa..9fa3388 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -487,7 +487,6 @@
static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
{
char *v = c->x86_vendor_id;
- static int printed;
int i;
for (i = 0; i < X86_VENDOR_NUM; i++) {
@@ -504,13 +503,9 @@
}
}
- if (!printed) {
- printed++;
- printk(KERN_ERR
- "CPU: vendor_id '%s' unknown, using generic init.\n", v);
-
- printk(KERN_ERR "CPU: Your system may be unstable.\n");
- }
+ printk_once(KERN_ERR
+ "CPU: vendor_id '%s' unknown, using generic init.\n" \
+ "CPU: Your system may be unstable.\n", v);
c->x86_vendor = X86_VENDOR_UNKNOWN;
this_cpu = &default_cpu;
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index daed39b..3260ab0 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -86,6 +86,29 @@
*/
if (c->x86 == 6 && c->x86_model < 15)
clear_cpu_cap(c, X86_FEATURE_PAT);
+
+#ifdef CONFIG_KMEMCHECK
+ /*
+ * P4s have a "fast strings" feature which causes single-
+ * stepping REP instructions to only generate a #DB on
+ * cache-line boundaries.
+ *
+ * Ingo Molnar reported a Pentium D (model 6) and a Xeon
+ * (model 2) with the same problem.
+ */
+ if (c->x86 == 15) {
+ u64 misc_enable;
+
+ rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+
+ if (misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING) {
+ printk(KERN_INFO "kmemcheck: Disabling fast string operations\n");
+
+ misc_enable &= ~MSR_IA32_MISC_ENABLE_FAST_STRING;
+ wrmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+ }
+ }
+#endif
}
#ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 2ac1f0c..b07af88 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -182,6 +182,11 @@
.notifier_call = cpuid_class_cpu_callback,
};
+static char *cpuid_nodename(struct device *dev)
+{
+ return kasprintf(GFP_KERNEL, "cpu/%u/cpuid", MINOR(dev->devt));
+}
+
static int __init cpuid_init(void)
{
int i, err = 0;
@@ -198,6 +203,7 @@
err = PTR_ERR(cpuid_class);
goto out_chrdev;
}
+ cpuid_class->nodename = cpuid_nodename;
for_each_online_cpu(i) {
err = cpuid_device_create(i);
if (err != 0)
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index c2e0bb0..5cf36c0 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -7,6 +7,7 @@
#include <linux/spinlock.h>
#include <linux/jiffies.h>
#include <linux/module.h>
+#include <linux/timex.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c
index df3bf26..270ff83 100644
--- a/arch/x86/kernel/init_task.c
+++ b/arch/x86/kernel/init_task.c
@@ -12,7 +12,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
/*
* Initial thread structure.
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 9c44615..9371448 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -236,6 +236,7 @@
static struct miscdevice microcode_dev = {
.minor = MICROCODE_MINOR,
.name = "microcode",
+ .devnode = "cpu/microcode",
.fops = µcode_fops,
};
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 3cf3413..98fd6cd 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -196,6 +196,11 @@
.notifier_call = msr_class_cpu_callback,
};
+static char *msr_nodename(struct device *dev)
+{
+ return kasprintf(GFP_KERNEL, "cpu/%u/msr", MINOR(dev->devt));
+}
+
static int __init msr_init(void)
{
int i, err = 0;
@@ -212,6 +217,7 @@
err = PTR_ERR(msr_class);
goto out_chrdev;
}
+ msr_class->nodename = msr_nodename;
for_each_online_cpu(i) {
err = msr_device_create(i);
if (err != 0)
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 3bb2be1..994dd6a 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -63,7 +63,7 @@
task_xstate_cachep =
kmem_cache_create("task_xstate", xstate_size,
__alignof__(union thread_xstate),
- SLAB_PANIC, NULL);
+ SLAB_PANIC | SLAB_NOTRACK, NULL);
}
/*
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index 4aaf7e4..c3eb207 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -77,6 +77,13 @@
}
EXPORT_SYMBOL_GPL(save_stack_trace);
+void save_stack_trace_bp(struct stack_trace *trace, unsigned long bp)
+{
+ dump_trace(current, NULL, NULL, bp, &save_stack_ops, trace);
+ if (trace->nr_entries < trace->max_entries)
+ trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+
void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
{
dump_trace(tsk, NULL, NULL, 0, &save_stack_ops_nosched, trace);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 1e1e27b..5f935f0 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -45,6 +45,7 @@
#include <linux/edac.h>
#endif
+#include <asm/kmemcheck.h>
#include <asm/stacktrace.h>
#include <asm/processor.h>
#include <asm/debugreg.h>
@@ -534,6 +535,10 @@
get_debugreg(condition, 6);
+ /* Catch kmemcheck conditions first of all! */
+ if (condition & DR_STEP && kmemcheck_trap(regs))
+ return;
+
/*
* The processor cleared BTF, so don't mark that we need it set.
*/
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 3e1c057..ae3180c 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -9,6 +9,7 @@
#include <linux/delay.h>
#include <linux/clocksource.h>
#include <linux/percpu.h>
+#include <linux/timex.h>
#include <asm/hpet.h>
#include <asm/timer.h>
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 32d6ae8..e770bf3 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1277,7 +1277,7 @@
struct page *pages;
struct vmcs *vmcs;
- pages = alloc_pages_node(node, GFP_KERNEL, vmcs_config.order);
+ pages = alloc_pages_exact_node(node, GFP_KERNEL, vmcs_config.order);
if (!pages)
return NULL;
vmcs = page_address(pages);
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index fdd30d0..eefdeee 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -10,6 +10,8 @@
obj-$(CONFIG_HIGHMEM) += highmem_32.o
+obj-$(CONFIG_KMEMCHECK) += kmemcheck/
+
obj-$(CONFIG_MMIOTRACE) += mmiotrace.o
mmiotrace-y := kmmio.o pf_in.o mmio-mod.o
obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index c6acc63..baa0e86 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -14,6 +14,7 @@
#include <asm/traps.h> /* dotraplinkage, ... */
#include <asm/pgalloc.h> /* pgd_*(), ... */
+#include <asm/kmemcheck.h> /* kmemcheck_*(), ... */
/*
* Page fault error code bits:
@@ -956,6 +957,13 @@
/* Get the faulting address: */
address = read_cr2();
+ /*
+ * Detect and handle instructions that would cause a page fault for
+ * both a tracked kernel page and a userspace page.
+ */
+ if (kmemcheck_active(regs))
+ kmemcheck_hide(regs);
+
if (unlikely(kmmio_fault(regs, address)))
return;
@@ -973,9 +981,13 @@
* protection error (error_code & 9) == 0.
*/
if (unlikely(fault_in_kernel_space(address))) {
- if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) &&
- vmalloc_fault(address) >= 0)
- return;
+ if (!(error_code & (PF_RSVD | PF_USER | PF_PROT))) {
+ if (vmalloc_fault(address) >= 0)
+ return;
+
+ if (kmemcheck_fault(regs, address, error_code))
+ return;
+ }
/* Can handle a stale RO->RW TLB: */
if (spurious_fault(error_code, address))
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 34c1bfb..f53b57e 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -213,7 +213,7 @@
if (!after_bootmem)
init_gbpages();
-#ifdef CONFIG_DEBUG_PAGEALLOC
+#if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KMEMCHECK)
/*
* For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages.
* This will simplify cpa(), which otherwise needs to support splitting
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 9ff3c08..3cd7711 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -111,7 +111,7 @@
pte_t *page_table = NULL;
if (after_bootmem) {
-#ifdef CONFIG_DEBUG_PAGEALLOC
+#if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KMEMCHECK)
page_table = (pte_t *) alloc_bootmem_pages(PAGE_SIZE);
#endif
if (!page_table)
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 52bb951..9c54329 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -104,7 +104,7 @@
void *ptr;
if (after_bootmem)
- ptr = (void *) get_zeroed_page(GFP_ATOMIC);
+ ptr = (void *) get_zeroed_page(GFP_ATOMIC | __GFP_NOTRACK);
else
ptr = alloc_bootmem_pages(PAGE_SIZE);
@@ -281,7 +281,7 @@
void *adr;
if (after_bootmem) {
- adr = (void *)get_zeroed_page(GFP_ATOMIC);
+ adr = (void *)get_zeroed_page(GFP_ATOMIC | __GFP_NOTRACK);
*phys = __pa(adr);
return adr;
diff --git a/arch/x86/mm/kmemcheck/Makefile b/arch/x86/mm/kmemcheck/Makefile
new file mode 100644
index 0000000..520b3bc
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/Makefile
@@ -0,0 +1 @@
+obj-y := error.o kmemcheck.o opcode.o pte.o selftest.o shadow.o
diff --git a/arch/x86/mm/kmemcheck/error.c b/arch/x86/mm/kmemcheck/error.c
new file mode 100644
index 0000000..4901d0d
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/error.c
@@ -0,0 +1,228 @@
+#include <linux/interrupt.h>
+#include <linux/kdebug.h>
+#include <linux/kmemcheck.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/stacktrace.h>
+#include <linux/string.h>
+
+#include "error.h"
+#include "shadow.h"
+
+enum kmemcheck_error_type {
+ KMEMCHECK_ERROR_INVALID_ACCESS,
+ KMEMCHECK_ERROR_BUG,
+};
+
+#define SHADOW_COPY_SIZE (1 << CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT)
+
+struct kmemcheck_error {
+ enum kmemcheck_error_type type;
+
+ union {
+ /* KMEMCHECK_ERROR_INVALID_ACCESS */
+ struct {
+ /* Kind of access that caused the error */
+ enum kmemcheck_shadow state;
+ /* Address and size of the erroneous read */
+ unsigned long address;
+ unsigned int size;
+ };
+ };
+
+ struct pt_regs regs;
+ struct stack_trace trace;
+ unsigned long trace_entries[32];
+
+ /* We compress it to a char. */
+ unsigned char shadow_copy[SHADOW_COPY_SIZE];
+ unsigned char memory_copy[SHADOW_COPY_SIZE];
+};
+
+/*
+ * Create a ring queue of errors to output. We can't call printk() directly
+ * from the kmemcheck traps, since this may call the console drivers and
+ * result in a recursive fault.
+ */
+static struct kmemcheck_error error_fifo[CONFIG_KMEMCHECK_QUEUE_SIZE];
+static unsigned int error_count;
+static unsigned int error_rd;
+static unsigned int error_wr;
+static unsigned int error_missed_count;
+
+static struct kmemcheck_error *error_next_wr(void)
+{
+ struct kmemcheck_error *e;
+
+ if (error_count == ARRAY_SIZE(error_fifo)) {
+ ++error_missed_count;
+ return NULL;
+ }
+
+ e = &error_fifo[error_wr];
+ if (++error_wr == ARRAY_SIZE(error_fifo))
+ error_wr = 0;
+ ++error_count;
+ return e;
+}
+
+static struct kmemcheck_error *error_next_rd(void)
+{
+ struct kmemcheck_error *e;
+
+ if (error_count == 0)
+ return NULL;
+
+ e = &error_fifo[error_rd];
+ if (++error_rd == ARRAY_SIZE(error_fifo))
+ error_rd = 0;
+ --error_count;
+ return e;
+}
+
+void kmemcheck_error_recall(void)
+{
+ static const char *desc[] = {
+ [KMEMCHECK_SHADOW_UNALLOCATED] = "unallocated",
+ [KMEMCHECK_SHADOW_UNINITIALIZED] = "uninitialized",
+ [KMEMCHECK_SHADOW_INITIALIZED] = "initialized",
+ [KMEMCHECK_SHADOW_FREED] = "freed",
+ };
+
+ static const char short_desc[] = {
+ [KMEMCHECK_SHADOW_UNALLOCATED] = 'a',
+ [KMEMCHECK_SHADOW_UNINITIALIZED] = 'u',
+ [KMEMCHECK_SHADOW_INITIALIZED] = 'i',
+ [KMEMCHECK_SHADOW_FREED] = 'f',
+ };
+
+ struct kmemcheck_error *e;
+ unsigned int i;
+
+ e = error_next_rd();
+ if (!e)
+ return;
+
+ switch (e->type) {
+ case KMEMCHECK_ERROR_INVALID_ACCESS:
+ printk(KERN_ERR "WARNING: kmemcheck: Caught %d-bit read "
+ "from %s memory (%p)\n",
+ 8 * e->size, e->state < ARRAY_SIZE(desc) ?
+ desc[e->state] : "(invalid shadow state)",
+ (void *) e->address);
+
+ printk(KERN_INFO);
+ for (i = 0; i < SHADOW_COPY_SIZE; ++i)
+ printk("%02x", e->memory_copy[i]);
+ printk("\n");
+
+ printk(KERN_INFO);
+ for (i = 0; i < SHADOW_COPY_SIZE; ++i) {
+ if (e->shadow_copy[i] < ARRAY_SIZE(short_desc))
+ printk(" %c", short_desc[e->shadow_copy[i]]);
+ else
+ printk(" ?");
+ }
+ printk("\n");
+ printk(KERN_INFO "%*c\n", 2 + 2
+ * (int) (e->address & (SHADOW_COPY_SIZE - 1)), '^');
+ break;
+ case KMEMCHECK_ERROR_BUG:
+ printk(KERN_EMERG "ERROR: kmemcheck: Fatal error\n");
+ break;
+ }
+
+ __show_regs(&e->regs, 1);
+ print_stack_trace(&e->trace, 0);
+}
+
+static void do_wakeup(unsigned long data)
+{
+ while (error_count > 0)
+ kmemcheck_error_recall();
+
+ if (error_missed_count > 0) {
+ printk(KERN_WARNING "kmemcheck: Lost %d error reports because "
+ "the queue was too small\n", error_missed_count);
+ error_missed_count = 0;
+ }
+}
+
+static DECLARE_TASKLET(kmemcheck_tasklet, &do_wakeup, 0);
+
+/*
+ * Save the context of an error report.
+ */
+void kmemcheck_error_save(enum kmemcheck_shadow state,
+ unsigned long address, unsigned int size, struct pt_regs *regs)
+{
+ static unsigned long prev_ip;
+
+ struct kmemcheck_error *e;
+ void *shadow_copy;
+ void *memory_copy;
+
+ /* Don't report several adjacent errors from the same EIP. */
+ if (regs->ip == prev_ip)
+ return;
+ prev_ip = regs->ip;
+
+ e = error_next_wr();
+ if (!e)
+ return;
+
+ e->type = KMEMCHECK_ERROR_INVALID_ACCESS;
+
+ e->state = state;
+ e->address = address;
+ e->size = size;
+
+ /* Save regs */
+ memcpy(&e->regs, regs, sizeof(*regs));
+
+ /* Save stack trace */
+ e->trace.nr_entries = 0;
+ e->trace.entries = e->trace_entries;
+ e->trace.max_entries = ARRAY_SIZE(e->trace_entries);
+ e->trace.skip = 0;
+ save_stack_trace_bp(&e->trace, regs->bp);
+
+ /* Round address down to nearest 16 bytes */
+ shadow_copy = kmemcheck_shadow_lookup(address
+ & ~(SHADOW_COPY_SIZE - 1));
+ BUG_ON(!shadow_copy);
+
+ memcpy(e->shadow_copy, shadow_copy, SHADOW_COPY_SIZE);
+
+ kmemcheck_show_addr(address);
+ memory_copy = (void *) (address & ~(SHADOW_COPY_SIZE - 1));
+ memcpy(e->memory_copy, memory_copy, SHADOW_COPY_SIZE);
+ kmemcheck_hide_addr(address);
+
+ tasklet_hi_schedule_first(&kmemcheck_tasklet);
+}
+
+/*
+ * Save the context of a kmemcheck bug.
+ */
+void kmemcheck_error_save_bug(struct pt_regs *regs)
+{
+ struct kmemcheck_error *e;
+
+ e = error_next_wr();
+ if (!e)
+ return;
+
+ e->type = KMEMCHECK_ERROR_BUG;
+
+ memcpy(&e->regs, regs, sizeof(*regs));
+
+ e->trace.nr_entries = 0;
+ e->trace.entries = e->trace_entries;
+ e->trace.max_entries = ARRAY_SIZE(e->trace_entries);
+ e->trace.skip = 1;
+ save_stack_trace(&e->trace);
+
+ tasklet_hi_schedule_first(&kmemcheck_tasklet);
+}
diff --git a/arch/x86/mm/kmemcheck/error.h b/arch/x86/mm/kmemcheck/error.h
new file mode 100644
index 0000000..0efc2e8
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/error.h
@@ -0,0 +1,15 @@
+#ifndef ARCH__X86__MM__KMEMCHECK__ERROR_H
+#define ARCH__X86__MM__KMEMCHECK__ERROR_H
+
+#include <linux/ptrace.h>
+
+#include "shadow.h"
+
+void kmemcheck_error_save(enum kmemcheck_shadow state,
+ unsigned long address, unsigned int size, struct pt_regs *regs);
+
+void kmemcheck_error_save_bug(struct pt_regs *regs);
+
+void kmemcheck_error_recall(void);
+
+#endif
diff --git a/arch/x86/mm/kmemcheck/kmemcheck.c b/arch/x86/mm/kmemcheck/kmemcheck.c
new file mode 100644
index 0000000..2c55ed0
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/kmemcheck.c
@@ -0,0 +1,640 @@
+/**
+ * kmemcheck - a heavyweight memory checker for the linux kernel
+ * Copyright (C) 2007, 2008 Vegard Nossum <vegardno@ifi.uio.no>
+ * (With a lot of help from Ingo Molnar and Pekka Enberg.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2) as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
+#include <linux/kernel.h>
+#include <linux/kmemcheck.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/page-flags.h>
+#include <linux/percpu.h>
+#include <linux/ptrace.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/cacheflush.h>
+#include <asm/kmemcheck.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+#include "error.h"
+#include "opcode.h"
+#include "pte.h"
+#include "selftest.h"
+#include "shadow.h"
+
+
+#ifdef CONFIG_KMEMCHECK_DISABLED_BY_DEFAULT
+# define KMEMCHECK_ENABLED 0
+#endif
+
+#ifdef CONFIG_KMEMCHECK_ENABLED_BY_DEFAULT
+# define KMEMCHECK_ENABLED 1
+#endif
+
+#ifdef CONFIG_KMEMCHECK_ONESHOT_BY_DEFAULT
+# define KMEMCHECK_ENABLED 2
+#endif
+
+int kmemcheck_enabled = KMEMCHECK_ENABLED;
+
+int __init kmemcheck_init(void)
+{
+#ifdef CONFIG_SMP
+ /*
+ * Limit SMP to use a single CPU. We rely on the fact that this code
+ * runs before SMP is set up.
+ */
+ if (setup_max_cpus > 1) {
+ printk(KERN_INFO
+ "kmemcheck: Limiting number of CPUs to 1.\n");
+ setup_max_cpus = 1;
+ }
+#endif
+
+ if (!kmemcheck_selftest()) {
+ printk(KERN_INFO "kmemcheck: self-tests failed; disabling\n");
+ kmemcheck_enabled = 0;
+ return -EINVAL;
+ }
+
+ printk(KERN_INFO "kmemcheck: Initialized\n");
+ return 0;
+}
+
+early_initcall(kmemcheck_init);
+
+/*
+ * We need to parse the kmemcheck= option before any memory is allocated.
+ */
+static int __init param_kmemcheck(char *str)
+{
+ if (!str)
+ return -EINVAL;
+
+ sscanf(str, "%d", &kmemcheck_enabled);
+ return 0;
+}
+
+early_param("kmemcheck", param_kmemcheck);
+
+int kmemcheck_show_addr(unsigned long address)
+{
+ pte_t *pte;
+
+ pte = kmemcheck_pte_lookup(address);
+ if (!pte)
+ return 0;
+
+ set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT));
+ __flush_tlb_one(address);
+ return 1;
+}
+
+int kmemcheck_hide_addr(unsigned long address)
+{
+ pte_t *pte;
+
+ pte = kmemcheck_pte_lookup(address);
+ if (!pte)
+ return 0;
+
+ set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT));
+ __flush_tlb_one(address);
+ return 1;
+}
+
+struct kmemcheck_context {
+ bool busy;
+ int balance;
+
+ /*
+ * There can be at most two memory operands to an instruction, but
+ * each address can cross a page boundary -- so we may need up to
+ * four addresses that must be hidden/revealed for each fault.
+ */
+ unsigned long addr[4];
+ unsigned long n_addrs;
+ unsigned long flags;
+
+ /* Data size of the instruction that caused a fault. */
+ unsigned int size;
+};
+
+static DEFINE_PER_CPU(struct kmemcheck_context, kmemcheck_context);
+
+bool kmemcheck_active(struct pt_regs *regs)
+{
+ struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+
+ return data->balance > 0;
+}
+
+/* Save an address that needs to be shown/hidden */
+static void kmemcheck_save_addr(unsigned long addr)
+{
+ struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+
+ BUG_ON(data->n_addrs >= ARRAY_SIZE(data->addr));
+ data->addr[data->n_addrs++] = addr;
+}
+
+static unsigned int kmemcheck_show_all(void)
+{
+ struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+ unsigned int i;
+ unsigned int n;
+
+ n = 0;
+ for (i = 0; i < data->n_addrs; ++i)
+ n += kmemcheck_show_addr(data->addr[i]);
+
+ return n;
+}
+
+static unsigned int kmemcheck_hide_all(void)
+{
+ struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+ unsigned int i;
+ unsigned int n;
+
+ n = 0;
+ for (i = 0; i < data->n_addrs; ++i)
+ n += kmemcheck_hide_addr(data->addr[i]);
+
+ return n;
+}
+
+/*
+ * Called from the #PF handler.
+ */
+void kmemcheck_show(struct pt_regs *regs)
+{
+ struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+
+ BUG_ON(!irqs_disabled());
+
+ if (unlikely(data->balance != 0)) {
+ kmemcheck_show_all();
+ kmemcheck_error_save_bug(regs);
+ data->balance = 0;
+ return;
+ }
+
+ /*
+ * None of the addresses actually belonged to kmemcheck. Note that
+ * this is not an error.
+ */
+ if (kmemcheck_show_all() == 0)
+ return;
+
+ ++data->balance;
+
+ /*
+ * The IF needs to be cleared as well, so that the faulting
+ * instruction can run "uninterrupted". Otherwise, we might take
+ * an interrupt and start executing that before we've had a chance
+ * to hide the page again.
+ *
+ * NOTE: In the rare case of multiple faults, we must not override
+ * the original flags:
+ */
+ if (!(regs->flags & X86_EFLAGS_TF))
+ data->flags = regs->flags;
+
+ regs->flags |= X86_EFLAGS_TF;
+ regs->flags &= ~X86_EFLAGS_IF;
+}
+
+/*
+ * Called from the #DB handler.
+ */
+void kmemcheck_hide(struct pt_regs *regs)
+{
+ struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+ int n;
+
+ BUG_ON(!irqs_disabled());
+
+ if (data->balance == 0)
+ return;
+
+ if (unlikely(data->balance != 1)) {
+ kmemcheck_show_all();
+ kmemcheck_error_save_bug(regs);
+ data->n_addrs = 0;
+ data->balance = 0;
+
+ if (!(data->flags & X86_EFLAGS_TF))
+ regs->flags &= ~X86_EFLAGS_TF;
+ if (data->flags & X86_EFLAGS_IF)
+ regs->flags |= X86_EFLAGS_IF;
+ return;
+ }
+
+ if (kmemcheck_enabled)
+ n = kmemcheck_hide_all();
+ else
+ n = kmemcheck_show_all();
+
+ if (n == 0)
+ return;
+
+ --data->balance;
+
+ data->n_addrs = 0;
+
+ if (!(data->flags & X86_EFLAGS_TF))
+ regs->flags &= ~X86_EFLAGS_TF;
+ if (data->flags & X86_EFLAGS_IF)
+ regs->flags |= X86_EFLAGS_IF;
+}
+
+void kmemcheck_show_pages(struct page *p, unsigned int n)
+{
+ unsigned int i;
+
+ for (i = 0; i < n; ++i) {
+ unsigned long address;
+ pte_t *pte;
+ unsigned int level;
+
+ address = (unsigned long) page_address(&p[i]);
+ pte = lookup_address(address, &level);
+ BUG_ON(!pte);
+ BUG_ON(level != PG_LEVEL_4K);
+
+ set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT));
+ set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_HIDDEN));
+ __flush_tlb_one(address);
+ }
+}
+
+bool kmemcheck_page_is_tracked(struct page *p)
+{
+ /* This will also check the "hidden" flag of the PTE. */
+ return kmemcheck_pte_lookup((unsigned long) page_address(p));
+}
+
+void kmemcheck_hide_pages(struct page *p, unsigned int n)
+{
+ unsigned int i;
+
+ for (i = 0; i < n; ++i) {
+ unsigned long address;
+ pte_t *pte;
+ unsigned int level;
+
+ address = (unsigned long) page_address(&p[i]);
+ pte = lookup_address(address, &level);
+ BUG_ON(!pte);
+ BUG_ON(level != PG_LEVEL_4K);
+
+ set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT));
+ set_pte(pte, __pte(pte_val(*pte) | _PAGE_HIDDEN));
+ __flush_tlb_one(address);
+ }
+}
+
+/* Access may NOT cross page boundary */
+static void kmemcheck_read_strict(struct pt_regs *regs,
+ unsigned long addr, unsigned int size)
+{
+ void *shadow;
+ enum kmemcheck_shadow status;
+
+ shadow = kmemcheck_shadow_lookup(addr);
+ if (!shadow)
+ return;
+
+ kmemcheck_save_addr(addr);
+ status = kmemcheck_shadow_test(shadow, size);
+ if (status == KMEMCHECK_SHADOW_INITIALIZED)
+ return;
+
+ if (kmemcheck_enabled)
+ kmemcheck_error_save(status, addr, size, regs);
+
+ if (kmemcheck_enabled == 2)
+ kmemcheck_enabled = 0;
+
+ /* Don't warn about it again. */
+ kmemcheck_shadow_set(shadow, size);
+}
+
+/* Access may cross page boundary */
+static void kmemcheck_read(struct pt_regs *regs,
+ unsigned long addr, unsigned int size)
+{
+ unsigned long page = addr & PAGE_MASK;
+ unsigned long next_addr = addr + size - 1;
+ unsigned long next_page = next_addr & PAGE_MASK;
+
+ if (likely(page == next_page)) {
+ kmemcheck_read_strict(regs, addr, size);
+ return;
+ }
+
+ /*
+ * What we do is basically to split the access across the
+ * two pages and handle each part separately. Yes, this means
+ * that we may now see reads that are 3 + 5 bytes, for
+ * example (and if both are uninitialized, there will be two
+ * reports), but it makes the code a lot simpler.
+ */
+ kmemcheck_read_strict(regs, addr, next_page - addr);
+ kmemcheck_read_strict(regs, next_page, next_addr - next_page);
+}
+
+static void kmemcheck_write_strict(struct pt_regs *regs,
+ unsigned long addr, unsigned int size)
+{
+ void *shadow;
+
+ shadow = kmemcheck_shadow_lookup(addr);
+ if (!shadow)
+ return;
+
+ kmemcheck_save_addr(addr);
+ kmemcheck_shadow_set(shadow, size);
+}
+
+static void kmemcheck_write(struct pt_regs *regs,
+ unsigned long addr, unsigned int size)
+{
+ unsigned long page = addr & PAGE_MASK;
+ unsigned long next_addr = addr + size - 1;
+ unsigned long next_page = next_addr & PAGE_MASK;
+
+ if (likely(page == next_page)) {
+ kmemcheck_write_strict(regs, addr, size);
+ return;
+ }
+
+ /* See comment in kmemcheck_read(). */
+ kmemcheck_write_strict(regs, addr, next_page - addr);
+ kmemcheck_write_strict(regs, next_page, next_addr - next_page);
+}
+
+/*
+ * Copying is hard. We have two addresses, each of which may be split across
+ * a page (and each page will have different shadow addresses).
+ */
+static void kmemcheck_copy(struct pt_regs *regs,
+ unsigned long src_addr, unsigned long dst_addr, unsigned int size)
+{
+ uint8_t shadow[8];
+ enum kmemcheck_shadow status;
+
+ unsigned long page;
+ unsigned long next_addr;
+ unsigned long next_page;
+
+ uint8_t *x;
+ unsigned int i;
+ unsigned int n;
+
+ BUG_ON(size > sizeof(shadow));
+
+ page = src_addr & PAGE_MASK;
+ next_addr = src_addr + size - 1;
+ next_page = next_addr & PAGE_MASK;
+
+ if (likely(page == next_page)) {
+ /* Same page */
+ x = kmemcheck_shadow_lookup(src_addr);
+ if (x) {
+ kmemcheck_save_addr(src_addr);
+ for (i = 0; i < size; ++i)
+ shadow[i] = x[i];
+ } else {
+ for (i = 0; i < size; ++i)
+ shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
+ }
+ } else {
+ n = next_page - src_addr;
+ BUG_ON(n > sizeof(shadow));
+
+ /* First page */
+ x = kmemcheck_shadow_lookup(src_addr);
+ if (x) {
+ kmemcheck_save_addr(src_addr);
+ for (i = 0; i < n; ++i)
+ shadow[i] = x[i];
+ } else {
+ /* Not tracked */
+ for (i = 0; i < n; ++i)
+ shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
+ }
+
+ /* Second page */
+ x = kmemcheck_shadow_lookup(next_page);
+ if (x) {
+ kmemcheck_save_addr(next_page);
+ for (i = n; i < size; ++i)
+ shadow[i] = x[i - n];
+ } else {
+ /* Not tracked */
+ for (i = n; i < size; ++i)
+ shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
+ }
+ }
+
+ page = dst_addr & PAGE_MASK;
+ next_addr = dst_addr + size - 1;
+ next_page = next_addr & PAGE_MASK;
+
+ if (likely(page == next_page)) {
+ /* Same page */
+ x = kmemcheck_shadow_lookup(dst_addr);
+ if (x) {
+ kmemcheck_save_addr(dst_addr);
+ for (i = 0; i < size; ++i) {
+ x[i] = shadow[i];
+ shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
+ }
+ }
+ } else {
+ n = next_page - dst_addr;
+ BUG_ON(n > sizeof(shadow));
+
+ /* First page */
+ x = kmemcheck_shadow_lookup(dst_addr);
+ if (x) {
+ kmemcheck_save_addr(dst_addr);
+ for (i = 0; i < n; ++i) {
+ x[i] = shadow[i];
+ shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
+ }
+ }
+
+ /* Second page */
+ x = kmemcheck_shadow_lookup(next_page);
+ if (x) {
+ kmemcheck_save_addr(next_page);
+ for (i = n; i < size; ++i) {
+ x[i - n] = shadow[i];
+ shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
+ }
+ }
+ }
+
+ status = kmemcheck_shadow_test(shadow, size);
+ if (status == KMEMCHECK_SHADOW_INITIALIZED)
+ return;
+
+ if (kmemcheck_enabled)
+ kmemcheck_error_save(status, src_addr, size, regs);
+
+ if (kmemcheck_enabled == 2)
+ kmemcheck_enabled = 0;
+}
+
+enum kmemcheck_method {
+ KMEMCHECK_READ,
+ KMEMCHECK_WRITE,
+};
+
+static void kmemcheck_access(struct pt_regs *regs,
+ unsigned long fallback_address, enum kmemcheck_method fallback_method)
+{
+ const uint8_t *insn;
+ const uint8_t *insn_primary;
+ unsigned int size;
+
+ struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+
+ /* Recursive fault -- ouch. */
+ if (data->busy) {
+ kmemcheck_show_addr(fallback_address);
+ kmemcheck_error_save_bug(regs);
+ return;
+ }
+
+ data->busy = true;
+
+ insn = (const uint8_t *) regs->ip;
+ insn_primary = kmemcheck_opcode_get_primary(insn);
+
+ kmemcheck_opcode_decode(insn, &size);
+
+ switch (insn_primary[0]) {
+#ifdef CONFIG_KMEMCHECK_BITOPS_OK
+ /* AND, OR, XOR */
+ /*
+ * Unfortunately, these instructions have to be excluded from
+ * our regular checking since they access only some (and not
+ * all) bits. This clears out "bogus" bitfield-access warnings.
+ */
+ case 0x80:
+ case 0x81:
+ case 0x82:
+ case 0x83:
+ switch ((insn_primary[1] >> 3) & 7) {
+ /* OR */
+ case 1:
+ /* AND */
+ case 4:
+ /* XOR */
+ case 6:
+ kmemcheck_write(regs, fallback_address, size);
+ goto out;
+
+ /* ADD */
+ case 0:
+ /* ADC */
+ case 2:
+ /* SBB */
+ case 3:
+ /* SUB */
+ case 5:
+ /* CMP */
+ case 7:
+ break;
+ }
+ break;
+#endif
+
+ /* MOVS, MOVSB, MOVSW, MOVSD */
+ case 0xa4:
+ case 0xa5:
+ /*
+ * These instructions are special because they take two
+ * addresses, but we only get one page fault.
+ */
+ kmemcheck_copy(regs, regs->si, regs->di, size);
+ goto out;
+
+ /* CMPS, CMPSB, CMPSW, CMPSD */
+ case 0xa6:
+ case 0xa7:
+ kmemcheck_read(regs, regs->si, size);
+ kmemcheck_read(regs, regs->di, size);
+ goto out;
+ }
+
+ /*
+ * If the opcode isn't special in any way, we use the data from the
+ * page fault handler to determine the address and type of memory
+ * access.
+ */
+ switch (fallback_method) {
+ case KMEMCHECK_READ:
+ kmemcheck_read(regs, fallback_address, size);
+ goto out;
+ case KMEMCHECK_WRITE:
+ kmemcheck_write(regs, fallback_address, size);
+ goto out;
+ }
+
+out:
+ data->busy = false;
+}
+
+bool kmemcheck_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code)
+{
+ pte_t *pte;
+
+ /*
+ * XXX: Is it safe to assume that memory accesses from virtual 86
+ * mode or non-kernel code segments will _never_ access kernel
+ * memory (e.g. tracked pages)? For now, we need this to avoid
+ * invoking kmemcheck for PnP BIOS calls.
+ */
+ if (regs->flags & X86_VM_MASK)
+ return false;
+ if (regs->cs != __KERNEL_CS)
+ return false;
+
+ pte = kmemcheck_pte_lookup(address);
+ if (!pte)
+ return false;
+
+ if (error_code & 2)
+ kmemcheck_access(regs, address, KMEMCHECK_WRITE);
+ else
+ kmemcheck_access(regs, address, KMEMCHECK_READ);
+
+ kmemcheck_show(regs);
+ return true;
+}
+
+bool kmemcheck_trap(struct pt_regs *regs)
+{
+ if (!kmemcheck_active(regs))
+ return false;
+
+ /* We're done. */
+ kmemcheck_hide(regs);
+ return true;
+}
diff --git a/arch/x86/mm/kmemcheck/opcode.c b/arch/x86/mm/kmemcheck/opcode.c
new file mode 100644
index 0000000..63c19e2
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/opcode.c
@@ -0,0 +1,106 @@
+#include <linux/types.h>
+
+#include "opcode.h"
+
+static bool opcode_is_prefix(uint8_t b)
+{
+ return
+ /* Group 1 */
+ b == 0xf0 || b == 0xf2 || b == 0xf3
+ /* Group 2 */
+ || b == 0x2e || b == 0x36 || b == 0x3e || b == 0x26
+ || b == 0x64 || b == 0x65 || b == 0x2e || b == 0x3e
+ /* Group 3 */
+ || b == 0x66
+ /* Group 4 */
+ || b == 0x67;
+}
+
+#ifdef CONFIG_X86_64
+static bool opcode_is_rex_prefix(uint8_t b)
+{
+ return (b & 0xf0) == 0x40;
+}
+#else
+static bool opcode_is_rex_prefix(uint8_t b)
+{
+ return false;
+}
+#endif
+
+#define REX_W (1 << 3)
+
+/*
+ * This is a VERY crude opcode decoder. We only need to find the size of the
+ * load/store that caused our #PF and this should work for all the opcodes
+ * that we care about. Moreover, the ones who invented this instruction set
+ * should be shot.
+ */
+void kmemcheck_opcode_decode(const uint8_t *op, unsigned int *size)
+{
+ /* Default operand size */
+ int operand_size_override = 4;
+
+ /* prefixes */
+ for (; opcode_is_prefix(*op); ++op) {
+ if (*op == 0x66)
+ operand_size_override = 2;
+ }
+
+ /* REX prefix */
+ if (opcode_is_rex_prefix(*op)) {
+ uint8_t rex = *op;
+
+ ++op;
+ if (rex & REX_W) {
+ switch (*op) {
+ case 0x63:
+ *size = 4;
+ return;
+ case 0x0f:
+ ++op;
+
+ switch (*op) {
+ case 0xb6:
+ case 0xbe:
+ *size = 1;
+ return;
+ case 0xb7:
+ case 0xbf:
+ *size = 2;
+ return;
+ }
+
+ break;
+ }
+
+ *size = 8;
+ return;
+ }
+ }
+
+ /* escape opcode */
+ if (*op == 0x0f) {
+ ++op;
+
+ /*
+ * This is move with zero-extend and sign-extend, respectively;
+ * we don't have to think about 0xb6/0xbe, because this is
+ * already handled in the conditional below.
+ */
+ if (*op == 0xb7 || *op == 0xbf)
+ operand_size_override = 2;
+ }
+
+ *size = (*op & 1) ? operand_size_override : 1;
+}
+
+const uint8_t *kmemcheck_opcode_get_primary(const uint8_t *op)
+{
+ /* skip prefixes */
+ while (opcode_is_prefix(*op))
+ ++op;
+ if (opcode_is_rex_prefix(*op))
+ ++op;
+ return op;
+}
diff --git a/arch/x86/mm/kmemcheck/opcode.h b/arch/x86/mm/kmemcheck/opcode.h
new file mode 100644
index 0000000..6956aad
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/opcode.h
@@ -0,0 +1,9 @@
+#ifndef ARCH__X86__MM__KMEMCHECK__OPCODE_H
+#define ARCH__X86__MM__KMEMCHECK__OPCODE_H
+
+#include <linux/types.h>
+
+void kmemcheck_opcode_decode(const uint8_t *op, unsigned int *size);
+const uint8_t *kmemcheck_opcode_get_primary(const uint8_t *op);
+
+#endif
diff --git a/arch/x86/mm/kmemcheck/pte.c b/arch/x86/mm/kmemcheck/pte.c
new file mode 100644
index 0000000..4ead26e
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/pte.c
@@ -0,0 +1,22 @@
+#include <linux/mm.h>
+
+#include <asm/pgtable.h>
+
+#include "pte.h"
+
+pte_t *kmemcheck_pte_lookup(unsigned long address)
+{
+ pte_t *pte;
+ unsigned int level;
+
+ pte = lookup_address(address, &level);
+ if (!pte)
+ return NULL;
+ if (level != PG_LEVEL_4K)
+ return NULL;
+ if (!pte_hidden(*pte))
+ return NULL;
+
+ return pte;
+}
+
diff --git a/arch/x86/mm/kmemcheck/pte.h b/arch/x86/mm/kmemcheck/pte.h
new file mode 100644
index 0000000..9f59664
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/pte.h
@@ -0,0 +1,10 @@
+#ifndef ARCH__X86__MM__KMEMCHECK__PTE_H
+#define ARCH__X86__MM__KMEMCHECK__PTE_H
+
+#include <linux/mm.h>
+
+#include <asm/pgtable.h>
+
+pte_t *kmemcheck_pte_lookup(unsigned long address);
+
+#endif
diff --git a/arch/x86/mm/kmemcheck/selftest.c b/arch/x86/mm/kmemcheck/selftest.c
new file mode 100644
index 0000000..036efbe
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/selftest.c
@@ -0,0 +1,69 @@
+#include <linux/kernel.h>
+
+#include "opcode.h"
+#include "selftest.h"
+
+struct selftest_opcode {
+ unsigned int expected_size;
+ const uint8_t *insn;
+ const char *desc;
+};
+
+static const struct selftest_opcode selftest_opcodes[] = {
+ /* REP MOVS */
+ {1, "\xf3\xa4", "rep movsb <mem8>, <mem8>"},
+ {4, "\xf3\xa5", "rep movsl <mem32>, <mem32>"},
+
+ /* MOVZX / MOVZXD */
+ {1, "\x66\x0f\xb6\x51\xf8", "movzwq <mem8>, <reg16>"},
+ {1, "\x0f\xb6\x51\xf8", "movzwq <mem8>, <reg32>"},
+
+ /* MOVSX / MOVSXD */
+ {1, "\x66\x0f\xbe\x51\xf8", "movswq <mem8>, <reg16>"},
+ {1, "\x0f\xbe\x51\xf8", "movswq <mem8>, <reg32>"},
+
+#ifdef CONFIG_X86_64
+ /* MOVZX / MOVZXD */
+ {1, "\x49\x0f\xb6\x51\xf8", "movzbq <mem8>, <reg64>"},
+ {2, "\x49\x0f\xb7\x51\xf8", "movzbq <mem16>, <reg64>"},
+
+ /* MOVSX / MOVSXD */
+ {1, "\x49\x0f\xbe\x51\xf8", "movsbq <mem8>, <reg64>"},
+ {2, "\x49\x0f\xbf\x51\xf8", "movsbq <mem16>, <reg64>"},
+ {4, "\x49\x63\x51\xf8", "movslq <mem32>, <reg64>"},
+#endif
+};
+
+static bool selftest_opcode_one(const struct selftest_opcode *op)
+{
+ unsigned size;
+
+ kmemcheck_opcode_decode(op->insn, &size);
+
+ if (size == op->expected_size)
+ return true;
+
+ printk(KERN_WARNING "kmemcheck: opcode %s: expected size %d, got %d\n",
+ op->desc, op->expected_size, size);
+ return false;
+}
+
+static bool selftest_opcodes_all(void)
+{
+ bool pass = true;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(selftest_opcodes); ++i)
+ pass = pass && selftest_opcode_one(&selftest_opcodes[i]);
+
+ return pass;
+}
+
+bool kmemcheck_selftest(void)
+{
+ bool pass = true;
+
+ pass = pass && selftest_opcodes_all();
+
+ return pass;
+}
diff --git a/arch/x86/mm/kmemcheck/selftest.h b/arch/x86/mm/kmemcheck/selftest.h
new file mode 100644
index 0000000..8fed4fe
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/selftest.h
@@ -0,0 +1,6 @@
+#ifndef ARCH_X86_MM_KMEMCHECK_SELFTEST_H
+#define ARCH_X86_MM_KMEMCHECK_SELFTEST_H
+
+bool kmemcheck_selftest(void);
+
+#endif
diff --git a/arch/x86/mm/kmemcheck/shadow.c b/arch/x86/mm/kmemcheck/shadow.c
new file mode 100644
index 0000000..e773b6b
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/shadow.c
@@ -0,0 +1,162 @@
+#include <linux/kmemcheck.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+#include "pte.h"
+#include "shadow.h"
+
+/*
+ * Return the shadow address for the given address. Returns NULL if the
+ * address is not tracked.
+ *
+ * We need to be extremely careful not to follow any invalid pointers,
+ * because this function can be called for *any* possible address.
+ */
+void *kmemcheck_shadow_lookup(unsigned long address)
+{
+ pte_t *pte;
+ struct page *page;
+
+ if (!virt_addr_valid(address))
+ return NULL;
+
+ pte = kmemcheck_pte_lookup(address);
+ if (!pte)
+ return NULL;
+
+ page = virt_to_page(address);
+ if (!page->shadow)
+ return NULL;
+ return page->shadow + (address & (PAGE_SIZE - 1));
+}
+
+static void mark_shadow(void *address, unsigned int n,
+ enum kmemcheck_shadow status)
+{
+ unsigned long addr = (unsigned long) address;
+ unsigned long last_addr = addr + n - 1;
+ unsigned long page = addr & PAGE_MASK;
+ unsigned long last_page = last_addr & PAGE_MASK;
+ unsigned int first_n;
+ void *shadow;
+
+ /* If the memory range crosses a page boundary, stop there. */
+ if (page == last_page)
+ first_n = n;
+ else
+ first_n = page + PAGE_SIZE - addr;
+
+ shadow = kmemcheck_shadow_lookup(addr);
+ if (shadow)
+ memset(shadow, status, first_n);
+
+ addr += first_n;
+ n -= first_n;
+
+ /* Do full-page memset()s. */
+ while (n >= PAGE_SIZE) {
+ shadow = kmemcheck_shadow_lookup(addr);
+ if (shadow)
+ memset(shadow, status, PAGE_SIZE);
+
+ addr += PAGE_SIZE;
+ n -= PAGE_SIZE;
+ }
+
+ /* Do the remaining page, if any. */
+ if (n > 0) {
+ shadow = kmemcheck_shadow_lookup(addr);
+ if (shadow)
+ memset(shadow, status, n);
+ }
+}
+
+void kmemcheck_mark_unallocated(void *address, unsigned int n)
+{
+ mark_shadow(address, n, KMEMCHECK_SHADOW_UNALLOCATED);
+}
+
+void kmemcheck_mark_uninitialized(void *address, unsigned int n)
+{
+ mark_shadow(address, n, KMEMCHECK_SHADOW_UNINITIALIZED);
+}
+
+/*
+ * Fill the shadow memory of the given address such that the memory at that
+ * address is marked as being initialized.
+ */
+void kmemcheck_mark_initialized(void *address, unsigned int n)
+{
+ mark_shadow(address, n, KMEMCHECK_SHADOW_INITIALIZED);
+}
+EXPORT_SYMBOL_GPL(kmemcheck_mark_initialized);
+
+void kmemcheck_mark_freed(void *address, unsigned int n)
+{
+ mark_shadow(address, n, KMEMCHECK_SHADOW_FREED);
+}
+
+void kmemcheck_mark_unallocated_pages(struct page *p, unsigned int n)
+{
+ unsigned int i;
+
+ for (i = 0; i < n; ++i)
+ kmemcheck_mark_unallocated(page_address(&p[i]), PAGE_SIZE);
+}
+
+void kmemcheck_mark_uninitialized_pages(struct page *p, unsigned int n)
+{
+ unsigned int i;
+
+ for (i = 0; i < n; ++i)
+ kmemcheck_mark_uninitialized(page_address(&p[i]), PAGE_SIZE);
+}
+
+void kmemcheck_mark_initialized_pages(struct page *p, unsigned int n)
+{
+ unsigned int i;
+
+ for (i = 0; i < n; ++i)
+ kmemcheck_mark_initialized(page_address(&p[i]), PAGE_SIZE);
+}
+
+enum kmemcheck_shadow kmemcheck_shadow_test(void *shadow, unsigned int size)
+{
+ uint8_t *x;
+ unsigned int i;
+
+ x = shadow;
+
+#ifdef CONFIG_KMEMCHECK_PARTIAL_OK
+ /*
+ * Make sure _some_ bytes are initialized. Gcc frequently generates
+ * code to access neighboring bytes.
+ */
+ for (i = 0; i < size; ++i) {
+ if (x[i] == KMEMCHECK_SHADOW_INITIALIZED)
+ return x[i];
+ }
+#else
+ /* All bytes must be initialized. */
+ for (i = 0; i < size; ++i) {
+ if (x[i] != KMEMCHECK_SHADOW_INITIALIZED)
+ return x[i];
+ }
+#endif
+
+ return x[0];
+}
+
+void kmemcheck_shadow_set(void *shadow, unsigned int size)
+{
+ uint8_t *x;
+ unsigned int i;
+
+ x = shadow;
+ for (i = 0; i < size; ++i)
+ x[i] = KMEMCHECK_SHADOW_INITIALIZED;
+}
diff --git a/arch/x86/mm/kmemcheck/shadow.h b/arch/x86/mm/kmemcheck/shadow.h
new file mode 100644
index 0000000..af46d9a
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/shadow.h
@@ -0,0 +1,16 @@
+#ifndef ARCH__X86__MM__KMEMCHECK__SHADOW_H
+#define ARCH__X86__MM__KMEMCHECK__SHADOW_H
+
+enum kmemcheck_shadow {
+ KMEMCHECK_SHADOW_UNALLOCATED,
+ KMEMCHECK_SHADOW_UNINITIALIZED,
+ KMEMCHECK_SHADOW_INITIALIZED,
+ KMEMCHECK_SHADOW_FREED,
+};
+
+void *kmemcheck_shadow_lookup(unsigned long address);
+
+enum kmemcheck_shadow kmemcheck_shadow_test(void *shadow, unsigned int size);
+void kmemcheck_shadow_set(void *shadow, unsigned int size);
+
+#endif
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 6ce9518..3cfe9ce 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -470,7 +470,7 @@
if (!debug_pagealloc)
spin_unlock(&cpa_lock);
- base = alloc_pages(GFP_KERNEL, 0);
+ base = alloc_pages(GFP_KERNEL | __GFP_NOTRACK, 0);
if (!debug_pagealloc)
spin_lock(&cpa_lock);
if (!base)
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 7aa03a5..8e43bdd 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -4,9 +4,11 @@
#include <asm/tlb.h>
#include <asm/fixmap.h>
+#define PGALLOC_GFP GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO
+
pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
{
- return (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+ return (pte_t *)__get_free_page(PGALLOC_GFP);
}
pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
@@ -14,9 +16,9 @@
struct page *pte;
#ifdef CONFIG_HIGHPTE
- pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT|__GFP_ZERO, 0);
+ pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0);
#else
- pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+ pte = alloc_pages(PGALLOC_GFP, 0);
#endif
if (pte)
pgtable_page_ctor(pte);
@@ -161,7 +163,7 @@
bool failed = false;
for(i = 0; i < PREALLOCATED_PMDS; i++) {
- pmd_t *pmd = (pmd_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+ pmd_t *pmd = (pmd_t *)__get_free_page(PGALLOC_GFP);
if (pmd == NULL)
failed = true;
pmds[i] = pmd;
@@ -228,7 +230,7 @@
pmd_t *pmds[PREALLOCATED_PMDS];
unsigned long flags;
- pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+ pgd = (pgd_t *)__get_free_page(PGALLOC_GFP);
if (pgd == NULL)
goto out;
diff --git a/arch/xtensa/include/asm/kmap_types.h b/arch/xtensa/include/asm/kmap_types.h
index 9e822d2..11c687e 100644
--- a/arch/xtensa/include/asm/kmap_types.h
+++ b/arch/xtensa/include/asm/kmap_types.h
@@ -1,31 +1,6 @@
-/*
- * include/asm-xtensa/kmap_types.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
#ifndef _XTENSA_KMAP_TYPES_H
#define _XTENSA_KMAP_TYPES_H
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
#endif /* _XTENSA_KMAP_TYPES_H */
diff --git a/arch/xtensa/kernel/init_task.c b/arch/xtensa/kernel/init_task.c
index e07f5c9..c4302f0 100644
--- a/arch/xtensa/kernel/init_task.c
+++ b/arch/xtensa/kernel/init_task.c
@@ -23,10 +23,6 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
union thread_union init_thread_union
__attribute__((__section__(".data.init_task"))) =
{ INIT_THREAD_INFO(init_task) };
diff --git a/block/bsg.c b/block/bsg.c
index 5358f9a..54106f0 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -1065,6 +1065,11 @@
static struct cdev bsg_cdev;
+static char *bsg_nodename(struct device *dev)
+{
+ return kasprintf(GFP_KERNEL, "bsg/%s", dev_name(dev));
+}
+
static int __init bsg_init(void)
{
int ret, i;
@@ -1085,6 +1090,7 @@
ret = PTR_ERR(bsg_class);
goto destroy_kmemcache;
}
+ bsg_class->nodename = bsg_nodename;
ret = alloc_chrdev_region(&devid, 0, BSG_MAX_DEVS, "bsg");
if (ret)
diff --git a/block/genhd.c b/block/genhd.c
index fe7ccc0..f4c64c2 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -996,10 +996,20 @@
.name = "block",
};
+static char *block_nodename(struct device *dev)
+{
+ struct gendisk *disk = dev_to_disk(dev);
+
+ if (disk->nodename)
+ return disk->nodename(disk);
+ return NULL;
+}
+
static struct device_type disk_type = {
.name = "disk",
.groups = disk_attr_groups,
.release = disk_release,
+ .nodename = block_nodename,
};
#ifdef CONFIG_PROC_FS
diff --git a/crypto/xor.c b/crypto/xor.c
index 996b6ee..fc5b836 100644
--- a/crypto/xor.c
+++ b/crypto/xor.c
@@ -101,7 +101,12 @@
void *b1, *b2;
struct xor_block_template *f, *fastest;
- b1 = (void *) __get_free_pages(GFP_KERNEL, 2);
+ /*
+ * Note: Since the memory is not actually used for _anything_ but to
+ * test the XOR speed, we don't really want kmemcheck to warn about
+ * reading uninitialized bytes here.
+ */
+ b1 = (void *) __get_free_pages(GFP_KERNEL | __GFP_NOTRACK, 2);
if (!b1) {
printk(KERN_WARNING "xor: Yikes! No memory available.\n");
return -ENOMEM;
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 00cf955..a442c8f 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -104,6 +104,8 @@
source "drivers/uio/Kconfig"
+source "drivers/vlynq/Kconfig"
+
source "drivers/xen/Kconfig"
source "drivers/staging/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 9e7d4e5..00b44f4 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -105,6 +105,7 @@
obj-$(CONFIG_OF) += of/
obj-$(CONFIG_SSB) += ssb/
obj-$(CONFIG_VIRTIO) += virtio/
+obj-$(CONFIG_VLYNQ) += vlynq/
obj-$(CONFIG_STAGING) += staging/
obj-y += platform/
obj-y += ieee802154/
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 1977d4b..7ecb193 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -22,6 +22,7 @@
#include <linux/kallsyms.h>
#include <linux/semaphore.h>
#include <linux/mutex.h>
+#include <linux/async.h>
#include "base.h"
#include "power/power.h"
@@ -161,10 +162,18 @@
struct device *dev = to_dev(kobj);
int retval = 0;
- /* add the major/minor if present */
+ /* add device node properties if present */
if (MAJOR(dev->devt)) {
+ const char *tmp;
+ const char *name;
+
add_uevent_var(env, "MAJOR=%u", MAJOR(dev->devt));
add_uevent_var(env, "MINOR=%u", MINOR(dev->devt));
+ name = device_get_nodename(dev, &tmp);
+ if (name) {
+ add_uevent_var(env, "DEVNAME=%s", name);
+ kfree(tmp);
+ }
}
if (dev->type && dev->type->name)
@@ -874,7 +883,7 @@
* the name, and force the use of dev_name()
*/
if (dev->init_name) {
- dev_set_name(dev, dev->init_name);
+ dev_set_name(dev, "%s", dev->init_name);
dev->init_name = NULL;
}
@@ -1128,6 +1137,47 @@
}
/**
+ * device_get_nodename - path of device node file
+ * @dev: device
+ * @tmp: possibly allocated string
+ *
+ * Return the relative path of a possible device node.
+ * Non-default names may need to allocate a memory to compose
+ * a name. This memory is returned in tmp and needs to be
+ * freed by the caller.
+ */
+const char *device_get_nodename(struct device *dev, const char **tmp)
+{
+ char *s;
+
+ *tmp = NULL;
+
+ /* the device type may provide a specific name */
+ if (dev->type && dev->type->nodename)
+ *tmp = dev->type->nodename(dev);
+ if (*tmp)
+ return *tmp;
+
+ /* the class may provide a specific name */
+ if (dev->class && dev->class->nodename)
+ *tmp = dev->class->nodename(dev);
+ if (*tmp)
+ return *tmp;
+
+ /* return name without allocation, tmp == NULL */
+ if (strchr(dev_name(dev), '!') == NULL)
+ return dev_name(dev);
+
+ /* replace '!' in the name with '/' */
+ *tmp = kstrdup(dev_name(dev), GFP_KERNEL);
+ if (!*tmp)
+ return NULL;
+ while ((s = strchr(*tmp, '!')))
+ s[0] = '/';
+ return *tmp;
+}
+
+/**
* device_for_each_child - device child iterator.
* @parent: parent struct device.
* @data: data for the callback.
@@ -1271,7 +1321,7 @@
if (!root)
return ERR_PTR(err);
- err = dev_set_name(&root->dev, name);
+ err = dev_set_name(&root->dev, "%s", name);
if (err) {
kfree(root);
return ERR_PTR(err);
@@ -1665,4 +1715,5 @@
kobject_put(sysfs_dev_char_kobj);
kobject_put(sysfs_dev_block_kobj);
kobject_put(dev_kobj);
+ async_synchronize_full();
}
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 742cbe6..f010687 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -226,7 +226,7 @@
* pair is found, break out and return.
*
* Returns 1 if the device was bound to a driver;
- * 0 if no matching device was found;
+ * 0 if no matching driver was found;
* -ENODEV if the device is not registered.
*
* When called for a USB interface, @dev->parent->sem must be held.
@@ -320,6 +320,10 @@
devres_release_all(dev);
dev->driver = NULL;
klist_remove(&dev->p->knode_driver);
+ if (dev->bus)
+ blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
+ BUS_NOTIFY_UNBOUND_DRIVER,
+ dev);
}
}
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 8a267c4..ddeb819 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -40,7 +40,7 @@
static DEFINE_MUTEX(fw_lock);
struct firmware_priv {
- char fw_id[FIRMWARE_NAME_MAX];
+ char *fw_id;
struct completion completion;
struct bin_attribute attr_data;
struct firmware *fw;
@@ -355,8 +355,9 @@
for (i = 0; i < fw_priv->nr_pages; i++)
__free_page(fw_priv->pages[i]);
kfree(fw_priv->pages);
+ kfree(fw_priv->fw_id);
kfree(fw_priv);
- kfree(dev);
+ put_device(dev);
module_put(THIS_MODULE);
}
@@ -386,13 +387,19 @@
init_completion(&fw_priv->completion);
fw_priv->attr_data = firmware_attr_data_tmpl;
- strlcpy(fw_priv->fw_id, fw_name, FIRMWARE_NAME_MAX);
+ fw_priv->fw_id = kstrdup(fw_name, GFP_KERNEL);
+ if (!fw_priv->fw_id) {
+ dev_err(device, "%s: Firmware name allocation failed\n",
+ __func__);
+ retval = -ENOMEM;
+ goto error_kfree;
+ }
fw_priv->timeout.function = firmware_class_timeout;
fw_priv->timeout.data = (u_long) fw_priv;
init_timer(&fw_priv->timeout);
- dev_set_name(f_dev, dev_name(device));
+ dev_set_name(f_dev, "%s", dev_name(device));
f_dev->parent = device;
f_dev->class = &firmware_class;
dev_set_drvdata(f_dev, fw_priv);
@@ -400,14 +407,17 @@
retval = device_register(f_dev);
if (retval) {
dev_err(device, "%s: device_register failed\n", __func__);
- goto error_kfree;
+ put_device(f_dev);
+ goto error_kfree_fw_id;
}
*dev_p = f_dev;
return 0;
+error_kfree_fw_id:
+ kfree(fw_priv->fw_id);
error_kfree:
- kfree(fw_priv);
kfree(f_dev);
+ kfree(fw_priv);
return retval;
}
@@ -615,8 +625,9 @@
* @cont: function will be called asynchronously when the firmware
* request is over.
*
- * Asynchronous variant of request_firmware() for contexts where
- * it is not possible to sleep.
+ * Asynchronous variant of request_firmware() for user contexts where
+ * it is not possible to sleep for long time. It can't be called
+ * in atomic contexts.
**/
int
request_firmware_nowait(
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 40b8097..91d4087 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -72,10 +72,8 @@
"Node %d Inactive(anon): %8lu kB\n"
"Node %d Active(file): %8lu kB\n"
"Node %d Inactive(file): %8lu kB\n"
-#ifdef CONFIG_UNEVICTABLE_LRU
"Node %d Unevictable: %8lu kB\n"
"Node %d Mlocked: %8lu kB\n"
-#endif
#ifdef CONFIG_HIGHMEM
"Node %d HighTotal: %8lu kB\n"
"Node %d HighFree: %8lu kB\n"
@@ -105,10 +103,8 @@
nid, K(node_page_state(nid, NR_INACTIVE_ANON)),
nid, K(node_page_state(nid, NR_ACTIVE_FILE)),
nid, K(node_page_state(nid, NR_INACTIVE_FILE)),
-#ifdef CONFIG_UNEVICTABLE_LRU
nid, K(node_page_state(nid, NR_UNEVICTABLE)),
nid, K(node_page_state(nid, NR_MLOCK)),
-#endif
#ifdef CONFIG_HIGHMEM
nid, K(i.totalhigh),
nid, K(i.freehigh),
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index ead3f64..81cb01b 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -69,7 +69,8 @@
* @name: resource name
*/
struct resource *platform_get_resource_byname(struct platform_device *dev,
- unsigned int type, char *name)
+ unsigned int type,
+ const char *name)
{
int i;
@@ -88,7 +89,7 @@
* @dev: platform device
* @name: IRQ name
*/
-int platform_get_irq_byname(struct platform_device *dev, char *name)
+int platform_get_irq_byname(struct platform_device *dev, const char *name)
{
struct resource *r = platform_get_resource_byname(dev, IORESOURCE_IRQ,
name);
@@ -244,7 +245,7 @@
if (pdev->id != -1)
dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
else
- dev_set_name(&pdev->dev, pdev->name);
+ dev_set_name(&pdev->dev, "%s", pdev->name);
for (i = 0; i < pdev->num_resources; i++) {
struct resource *p, *r = &pdev->resource[i];
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 9742a78..79a9ae5 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -131,6 +131,8 @@
int sysdev_class_register(struct sysdev_class *cls)
{
+ int retval;
+
pr_debug("Registering sysdev class '%s'\n", cls->name);
INIT_LIST_HEAD(&cls->drivers);
@@ -138,7 +140,11 @@
cls->kset.kobj.parent = &system_kset->kobj;
cls->kset.kobj.ktype = &ktype_sysdev_class;
cls->kset.kobj.kset = system_kset;
- kobject_set_name(&cls->kset.kobj, cls->name);
+
+ retval = kobject_set_name(&cls->kset.kobj, "%s", cls->name);
+ if (retval)
+ return retval;
+
return kset_register(&cls->kset);
}
diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c
index 200efc4..1988835 100644
--- a/drivers/block/aoe/aoechr.c
+++ b/drivers/block/aoe/aoechr.c
@@ -266,6 +266,11 @@
.owner = THIS_MODULE,
};
+static char *aoe_nodename(struct device *dev)
+{
+ return kasprintf(GFP_KERNEL, "etherd/%s", dev_name(dev));
+}
+
int __init
aoechr_init(void)
{
@@ -283,6 +288,8 @@
unregister_chrdev(AOE_MAJOR, "aoechr");
return PTR_ERR(aoe_class);
}
+ aoe_class->nodename = aoe_nodename;
+
for (i = 0; i < ARRAY_SIZE(chardevs); ++i)
device_create(aoe_class, NULL,
MKDEV(AOE_MAJOR, chardevs[i].minor), NULL,
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index d57f117..83650e0 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -430,7 +430,7 @@
/********************************************************************
entries in debugfs
- /debugfs/pktcdvd[0-7]/
+ /sys/kernel/debug/pktcdvd[0-7]/
info
*******************************************************************/
@@ -2855,6 +2855,11 @@
.media_changed = pkt_media_changed,
};
+static char *pktcdvd_nodename(struct gendisk *gd)
+{
+ return kasprintf(GFP_KERNEL, "pktcdvd/%s", gd->disk_name);
+}
+
/*
* Set up mapping from pktcdvd device to CD-ROM device.
*/
@@ -2907,6 +2912,7 @@
disk->fops = &pktcdvd_ops;
disk->flags = GENHD_FL_REMOVABLE;
strcpy(disk->disk_name, pd->name);
+ disk->nodename = pktcdvd_nodename;
disk->private_data = pd;
disk->queue = blk_alloc_queue(GFP_KERNEL);
if (!disk->queue)
@@ -3062,6 +3068,7 @@
static struct miscdevice pkt_misc = {
.minor = MISC_DYNAMIC_MINOR,
.name = DRIVER_NAME,
+ .name = "pktcdvd/control",
.fops = &pkt_ctl_fops
};
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index c199682..e532847 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -753,12 +753,12 @@
/* Front end dir is a number, which is used as the id. */
info->handle = simple_strtoul(strrchr(dev->nodename, '/')+1, NULL, 0);
- dev->dev.driver_data = info;
+ dev_set_drvdata(&dev->dev, info);
err = talk_to_backend(dev, info);
if (err) {
kfree(info);
- dev->dev.driver_data = NULL;
+ dev_set_drvdata(&dev->dev, NULL);
return err;
}
@@ -843,7 +843,7 @@
*/
static int blkfront_resume(struct xenbus_device *dev)
{
- struct blkfront_info *info = dev->dev.driver_data;
+ struct blkfront_info *info = dev_get_drvdata(&dev->dev);
int err;
dev_dbg(&dev->dev, "blkfront_resume: %s\n", dev->nodename);
@@ -922,7 +922,7 @@
*/
static void blkfront_closing(struct xenbus_device *dev)
{
- struct blkfront_info *info = dev->dev.driver_data;
+ struct blkfront_info *info = dev_get_drvdata(&dev->dev);
unsigned long flags;
dev_dbg(&dev->dev, "blkfront_closing: %s removed\n", dev->nodename);
@@ -957,7 +957,7 @@
static void backend_changed(struct xenbus_device *dev,
enum xenbus_state backend_state)
{
- struct blkfront_info *info = dev->dev.driver_data;
+ struct blkfront_info *info = dev_get_drvdata(&dev->dev);
struct block_device *bd;
dev_dbg(&dev->dev, "blkfront:backend_changed.\n");
@@ -997,7 +997,7 @@
static int blkfront_remove(struct xenbus_device *dev)
{
- struct blkfront_info *info = dev->dev.driver_data;
+ struct blkfront_info *info = dev_get_drvdata(&dev->dev);
dev_dbg(&dev->dev, "blkfront_remove: %s removed\n", dev->nodename);
@@ -1010,7 +1010,7 @@
static int blkfront_is_ready(struct xenbus_device *dev)
{
- struct blkfront_info *info = dev->dev.driver_data;
+ struct blkfront_info *info = dev_get_drvdata(&dev->dev);
return info->is_ready;
}
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index c76bccf..7d64e42 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -347,7 +347,7 @@
static inline struct hvcs_struct *from_vio_dev(struct vio_dev *viod)
{
- return viod->dev.driver_data;
+ return dev_get_drvdata(&viod->dev);
}
/* The sysfs interface for the driver and devices */
@@ -785,7 +785,7 @@
kref_init(&hvcsd->kref);
hvcsd->vdev = dev;
- dev->dev.driver_data = hvcsd;
+ dev_set_drvdata(&dev->dev, hvcsd);
hvcsd->index = index;
@@ -831,7 +831,7 @@
static int __devexit hvcs_remove(struct vio_dev *dev)
{
- struct hvcs_struct *hvcsd = dev->dev.driver_data;
+ struct hvcs_struct *hvcsd = dev_get_drvdata(&dev->dev);
unsigned long flags;
struct tty_struct *tty;
diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c
index e5d583c..fc93e2f 100644
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -153,6 +153,7 @@
static struct miscdevice rng_miscdev = {
.minor = RNG_MISCDEV_MINOR,
.name = RNG_MODULE_NAME,
+ .devnode = "hwrng",
.fops = &rng_chrdev_ops,
};
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 2596446..d2e6980 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2375,14 +2375,14 @@
info->io.addr_data, info->io.regsize, info->io.regspacing,
info->irq);
- dev->dev.driver_data = (void *) info;
+ dev_set_drvdata(&dev->dev, info);
return try_smi_init(info);
}
static int __devexit ipmi_of_remove(struct of_device *dev)
{
- cleanup_one_si(dev->dev.driver_data);
+ cleanup_one_si(dev_get_drvdata(&dev->dev));
return 0;
}
diff --git a/drivers/char/misc.c b/drivers/char/misc.c
index a5e0db9..62c99fa 100644
--- a/drivers/char/misc.c
+++ b/drivers/char/misc.c
@@ -168,7 +168,6 @@
.open = misc_open,
};
-
/**
* misc_register - register a miscellaneous device
* @misc: device structure
@@ -217,8 +216,8 @@
misc_minors[misc->minor >> 3] |= 1 << (misc->minor & 7);
dev = MKDEV(MISC_MAJOR, misc->minor);
- misc->this_device = device_create(misc_class, misc->parent, dev, NULL,
- "%s", misc->name);
+ misc->this_device = device_create(misc_class, misc->parent, dev,
+ misc, "%s", misc->name);
if (IS_ERR(misc->this_device)) {
err = PTR_ERR(misc->this_device);
goto out;
@@ -264,6 +263,15 @@
EXPORT_SYMBOL(misc_register);
EXPORT_SYMBOL(misc_deregister);
+static char *misc_nodename(struct device *dev)
+{
+ struct miscdevice *c = dev_get_drvdata(dev);
+
+ if (c->devnode)
+ return kstrdup(c->devnode, GFP_KERNEL);
+ return NULL;
+}
+
static int __init misc_init(void)
{
int err;
@@ -279,6 +287,7 @@
err = -EIO;
if (register_chrdev(MISC_MAJOR,"misc",&misc_fops))
goto fail_printk;
+ misc_class->nodename = misc_nodename;
return 0;
fail_printk:
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index db32f0e..05f9d18 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -261,6 +261,11 @@
static struct cdev raw_cdev;
+static char *raw_nodename(struct device *dev)
+{
+ return kasprintf(GFP_KERNEL, "raw/%s", dev_name(dev));
+}
+
static int __init raw_init(void)
{
dev_t dev = MKDEV(RAW_MAJOR, 0);
@@ -284,6 +289,7 @@
ret = PTR_ERR(raw_class);
goto error_region;
}
+ raw_class->nodename = raw_nodename;
device_create(raw_class, NULL, MKDEV(RAW_MAJOR, 0), NULL, "rawctl");
return 0;
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index c796a86..d9113b4 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -171,8 +171,9 @@
int console_blanked;
static int vesa_blank_mode; /* 0:none 1:suspendV 2:suspendH 3:powerdown */
-static int blankinterval = 10*60*HZ;
static int vesa_off_interval;
+static int blankinterval = 10*60;
+core_param(consoleblank, blankinterval, int, 0444);
static DECLARE_WORK(console_work, console_callback);
@@ -1485,7 +1486,7 @@
update_attr(vc);
break;
case 9: /* set blanking interval */
- blankinterval = ((vc->vc_par[1] < 60) ? vc->vc_par[1] : 60) * 60 * HZ;
+ blankinterval = ((vc->vc_par[1] < 60) ? vc->vc_par[1] : 60) * 60;
poke_blanked_console();
break;
case 10: /* set bell frequency in Hz */
@@ -2871,7 +2872,7 @@
if (blankinterval) {
blank_state = blank_normal_wait;
- mod_timer(&console_timer, jiffies + blankinterval);
+ mod_timer(&console_timer, jiffies + (blankinterval * HZ));
}
for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) {
@@ -3677,7 +3678,7 @@
return; /* but leave console_blanked != 0 */
if (blankinterval) {
- mod_timer(&console_timer, jiffies + blankinterval);
+ mod_timer(&console_timer, jiffies + (blankinterval * HZ));
blank_state = blank_normal_wait;
}
@@ -3711,7 +3712,7 @@
static void blank_screen_t(unsigned long dummy)
{
if (unlikely(!keventd_up())) {
- mod_timer(&console_timer, jiffies + blankinterval);
+ mod_timer(&console_timer, jiffies + (blankinterval * HZ));
return;
}
blank_timer_expired = 1;
@@ -3741,7 +3742,7 @@
if (console_blanked)
unblank_screen();
else if (blankinterval) {
- mod_timer(&console_timer, jiffies + blankinterval);
+ mod_timer(&console_timer, jiffies + (blankinterval * HZ));
blank_state = blank_normal_wait;
}
}
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 40bd8c6..72a633a 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -18,6 +18,7 @@
#include <linux/acpi_pmtmr.h>
#include <linux/clocksource.h>
+#include <linux/timex.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/pci.h>
diff --git a/drivers/eisa/eisa.ids b/drivers/eisa/eisa.ids
index ed69837..6cbb7a5 100644
--- a/drivers/eisa/eisa.ids
+++ b/drivers/eisa/eisa.ids
@@ -1140,6 +1140,11 @@
NON0401 "c't Universal Ethernet Adapter"
NON0501 "c't Universal 16-Bit Sound Adapter"
NON0601 "c't Universal 8-Bit Adapter"
+NPI0120 "Network Peripherals NP-EISA-1 FDDI Interface"
+NPI0221 "Network Peripherals NP-EISA-2 FDDI Interface"
+NPI0223 "Network Peripherals NP-EISA-2E Enhanced FDDI Interface"
+NPI0301 "Network Peripherals NP-EISA-3 FDDI Interface"
+NPI0303 "Network Peripherals NP-EISA-3E Enhanced FDDI Interface"
NSS0011 "Newport Systems Solutions WNIC Adapter"
NVL0701 "Novell NE3200 Bus Master Ethernet"
NVL0702 "Novell NE3200T Bus Master Ethernet"
diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c
index 74edb1d..0dd0f63 100644
--- a/drivers/eisa/pci_eisa.c
+++ b/drivers/eisa/pci_eisa.c
@@ -31,11 +31,11 @@
}
pci_eisa_root.dev = &pdev->dev;
- pci_eisa_root.dev->driver_data = &pci_eisa_root;
pci_eisa_root.res = pdev->bus->resource[0];
pci_eisa_root.bus_base_addr = pdev->bus->resource[0]->start;
pci_eisa_root.slots = EISA_MAX_SLOTS;
pci_eisa_root.dma_mask = pdev->dma_mask;
+ dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root);
if (eisa_root_register (&pci_eisa_root)) {
printk (KERN_ERR "pci_eisa : Could not register EISA root\n");
diff --git a/drivers/eisa/virtual_root.c b/drivers/eisa/virtual_root.c
index 3074879..535e4f9 100644
--- a/drivers/eisa/virtual_root.c
+++ b/drivers/eisa/virtual_root.c
@@ -57,7 +57,7 @@
eisa_bus_root.force_probe = force_probe;
- eisa_root_dev.dev.driver_data = &eisa_bus_root;
+ dev_set_drvdata(&eisa_root_dev.dev, &eisa_bus_root);
if (eisa_root_register (&eisa_bus_root)) {
/* A real bridge may have been registered before
diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile
index a7c31e9..bc3b9bf 100644
--- a/drivers/firewire/Makefile
+++ b/drivers/firewire/Makefile
@@ -2,10 +2,10 @@
# Makefile for the Linux IEEE 1394 implementation
#
-firewire-core-y += fw-card.o fw-topology.o fw-transaction.o fw-iso.o \
- fw-device.o fw-cdev.o
-firewire-ohci-y += fw-ohci.o
-firewire-sbp2-y += fw-sbp2.o
+firewire-core-y += core-card.o core-cdev.o core-device.o \
+ core-iso.o core-topology.o core-transaction.o
+firewire-ohci-y += ohci.o
+firewire-sbp2-y += sbp2.o
obj-$(CONFIG_FIREWIRE) += firewire-core.o
obj-$(CONFIG_FIREWIRE_OHCI) += firewire-ohci.o
diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/core-card.c
similarity index 97%
rename from drivers/firewire/fw-card.c
rename to drivers/firewire/core-card.c
index 8b8c8c2..4c1be64 100644
--- a/drivers/firewire/fw-card.c
+++ b/drivers/firewire/core-card.c
@@ -16,18 +16,27 @@
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include <linux/bug.h>
#include <linux/completion.h>
#include <linux/crc-itu-t.h>
-#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
#include <linux/kref.h>
+#include <linux/list.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
-#include "fw-transaction.h"
-#include "fw-topology.h"
-#include "fw-device.h"
+#include <asm/atomic.h>
+#include <asm/byteorder.h>
+
+#include "core.h"
int fw_compute_block_crc(u32 *block)
{
@@ -181,12 +190,6 @@
mutex_unlock(&card_mutex);
}
-static int set_broadcast_channel(struct device *dev, void *data)
-{
- fw_device_set_broadcast_channel(fw_device(dev), (long)data);
- return 0;
-}
-
static void allocate_broadcast_channel(struct fw_card *card, int generation)
{
int channel, bandwidth = 0;
@@ -196,7 +199,7 @@
if (channel == 31) {
card->broadcast_channel_allocated = true;
device_for_each_child(card->device, (void *)(long)generation,
- set_broadcast_channel);
+ fw_device_set_broadcast_channel);
}
}
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/core-cdev.c
similarity index 99%
rename from drivers/firewire/fw-cdev.c
rename to drivers/firewire/core-cdev.c
index 7eb6594..d1d30c6 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
+#include <linux/firewire.h>
#include <linux/firewire-cdev.h>
#include <linux/idr.h>
#include <linux/jiffies.h>
@@ -34,16 +35,14 @@
#include <linux/preempt.h>
#include <linux/spinlock.h>
#include <linux/time.h>
+#include <linux/uaccess.h>
#include <linux/vmalloc.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
-#include "fw-device.h"
-#include "fw-topology.h"
-#include "fw-transaction.h"
+#include "core.h"
struct client {
u32 version;
@@ -739,15 +738,11 @@
static int ioctl_add_descriptor(struct client *client, void *buffer)
{
struct fw_cdev_add_descriptor *request = buffer;
- struct fw_card *card = client->device->card;
struct descriptor_resource *r;
int ret;
/* Access policy: Allow this ioctl only on local nodes' device files. */
- spin_lock_irq(&card->lock);
- ret = client->device->node_id != card->local_node->node_id;
- spin_unlock_irq(&card->lock);
- if (ret)
+ if (!client->device->is_local)
return -ENOSYS;
if (request->length > 256)
diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/core-device.c
similarity index 88%
rename from drivers/firewire/fw-device.c
rename to drivers/firewire/core-device.c
index a47e212..97e656a 100644
--- a/drivers/firewire/fw-device.c
+++ b/drivers/firewire/core-device.c
@@ -22,10 +22,14 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
#include <linux/idr.h>
#include <linux/jiffies.h>
#include <linux/kobject.h>
#include <linux/list.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/rwsem.h>
#include <linux/semaphore.h>
@@ -33,11 +37,11 @@
#include <linux/string.h>
#include <linux/workqueue.h>
+#include <asm/atomic.h>
+#include <asm/byteorder.h>
#include <asm/system.h>
-#include "fw-device.h"
-#include "fw-topology.h"
-#include "fw-transaction.h"
+#include "core.h"
void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 * p)
{
@@ -55,9 +59,10 @@
}
EXPORT_SYMBOL(fw_csr_iterator_next);
-static int is_fw_unit(struct device *dev);
+static bool is_fw_unit(struct device *dev);
-static int match_unit_directory(u32 * directory, const struct fw_device_id *id)
+static int match_unit_directory(u32 *directory, u32 match_flags,
+ const struct ieee1394_device_id *id)
{
struct fw_csr_iterator ci;
int key, value, match;
@@ -65,31 +70,42 @@
match = 0;
fw_csr_iterator_init(&ci, directory);
while (fw_csr_iterator_next(&ci, &key, &value)) {
- if (key == CSR_VENDOR && value == id->vendor)
- match |= FW_MATCH_VENDOR;
- if (key == CSR_MODEL && value == id->model)
- match |= FW_MATCH_MODEL;
+ if (key == CSR_VENDOR && value == id->vendor_id)
+ match |= IEEE1394_MATCH_VENDOR_ID;
+ if (key == CSR_MODEL && value == id->model_id)
+ match |= IEEE1394_MATCH_MODEL_ID;
if (key == CSR_SPECIFIER_ID && value == id->specifier_id)
- match |= FW_MATCH_SPECIFIER_ID;
+ match |= IEEE1394_MATCH_SPECIFIER_ID;
if (key == CSR_VERSION && value == id->version)
- match |= FW_MATCH_VERSION;
+ match |= IEEE1394_MATCH_VERSION;
}
- return (match & id->match_flags) == id->match_flags;
+ return (match & match_flags) == match_flags;
}
static int fw_unit_match(struct device *dev, struct device_driver *drv)
{
struct fw_unit *unit = fw_unit(dev);
- struct fw_driver *driver = fw_driver(drv);
- int i;
+ struct fw_device *device;
+ const struct ieee1394_device_id *id;
/* We only allow binding to fw_units. */
if (!is_fw_unit(dev))
return 0;
- for (i = 0; driver->id_table[i].match_flags != 0; i++) {
- if (match_unit_directory(unit->directory, &driver->id_table[i]))
+ device = fw_parent_device(unit);
+ id = container_of(drv, struct fw_driver, driver)->id_table;
+
+ for (; id->match_flags != 0; id++) {
+ if (match_unit_directory(unit->directory, id->match_flags, id))
+ return 1;
+
+ /* Also check vendor ID in the root directory. */
+ if ((id->match_flags & IEEE1394_MATCH_VENDOR_ID) &&
+ match_unit_directory(&device->config_rom[5],
+ IEEE1394_MATCH_VENDOR_ID, id) &&
+ match_unit_directory(unit->directory, id->match_flags
+ & ~IEEE1394_MATCH_VENDOR_ID, id))
return 1;
}
@@ -98,7 +114,7 @@
static int get_modalias(struct fw_unit *unit, char *buffer, size_t buffer_size)
{
- struct fw_device *device = fw_device(unit->device.parent);
+ struct fw_device *device = fw_parent_device(unit);
struct fw_csr_iterator ci;
int key, value;
@@ -292,8 +308,7 @@
group->attrs[j++] = &attr->attr;
}
- BUG_ON(j >= ARRAY_SIZE(group->attrs));
- group->attrs[j++] = NULL;
+ group->attrs[j] = NULL;
group->groups[0] = &group->group;
group->groups[1] = NULL;
group->group.attrs = group->attrs;
@@ -356,9 +371,56 @@
return ret;
}
+static int units_sprintf(char *buf, u32 *directory)
+{
+ struct fw_csr_iterator ci;
+ int key, value;
+ int specifier_id = 0;
+ int version = 0;
+
+ fw_csr_iterator_init(&ci, directory);
+ while (fw_csr_iterator_next(&ci, &key, &value)) {
+ switch (key) {
+ case CSR_SPECIFIER_ID:
+ specifier_id = value;
+ break;
+ case CSR_VERSION:
+ version = value;
+ break;
+ }
+ }
+
+ return sprintf(buf, "0x%06x:0x%06x ", specifier_id, version);
+}
+
+static ssize_t units_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fw_device *device = fw_device(dev);
+ struct fw_csr_iterator ci;
+ int key, value, i = 0;
+
+ down_read(&fw_device_rwsem);
+ fw_csr_iterator_init(&ci, &device->config_rom[5]);
+ while (fw_csr_iterator_next(&ci, &key, &value)) {
+ if (key != (CSR_UNIT | CSR_DIRECTORY))
+ continue;
+ i += units_sprintf(&buf[i], ci.p + value - 1);
+ if (i >= PAGE_SIZE - (8 + 1 + 8 + 1))
+ break;
+ }
+ up_read(&fw_device_rwsem);
+
+ if (i)
+ buf[i - 1] = '\n';
+
+ return i;
+}
+
static struct device_attribute fw_device_attributes[] = {
__ATTR_RO(config_rom),
__ATTR_RO(guid),
+ __ATTR_RO(units),
__ATTR_NULL,
};
@@ -518,7 +580,9 @@
kfree(old_rom);
ret = 0;
- device->cmc = rom[2] >> 30 & 1;
+ device->max_rec = rom[2] >> 12 & 0xf;
+ device->cmc = rom[2] >> 30 & 1;
+ device->irmc = rom[2] >> 31 & 1;
out:
kfree(rom);
@@ -537,7 +601,7 @@
.release = fw_unit_release,
};
-static int is_fw_unit(struct device *dev)
+static bool is_fw_unit(struct device *dev)
{
return dev->type == &fw_unit_type;
}
@@ -570,9 +634,13 @@
unit->device.parent = &device->device;
dev_set_name(&unit->device, "%s.%d", dev_name(&device->device), i++);
+ BUILD_BUG_ON(ARRAY_SIZE(unit->attribute_group.attrs) <
+ ARRAY_SIZE(fw_unit_attributes) +
+ ARRAY_SIZE(config_rom_attributes));
init_fw_attribute_group(&unit->device,
fw_unit_attributes,
&unit->attribute_group);
+
if (device_register(&unit->device) < 0)
goto skip_unit;
@@ -683,6 +751,11 @@
.release = fw_device_release,
};
+static bool is_fw_device(struct device *dev)
+{
+ return dev->type == &fw_device_type;
+}
+
static int update_unit(struct device *dev, void *data)
{
struct fw_unit *unit = fw_unit(dev);
@@ -719,6 +792,9 @@
struct fw_card *card = new->card;
int match = 0;
+ if (!is_fw_device(dev))
+ return 0;
+
down_read(&fw_device_rwsem); /* serialize config_rom access */
spin_lock_irq(&card->lock); /* serialize node access */
@@ -758,7 +834,7 @@
enum { BC_UNKNOWN = 0, BC_UNIMPLEMENTED, BC_IMPLEMENTED, };
-void fw_device_set_broadcast_channel(struct fw_device *device, int generation)
+static void set_broadcast_channel(struct fw_device *device, int generation)
{
struct fw_card *card = device->card;
__be32 data;
@@ -767,6 +843,20 @@
if (!card->broadcast_channel_allocated)
return;
+ /*
+ * The Broadcast_Channel Valid bit is required by nodes which want to
+ * transmit on this channel. Such transmissions are practically
+ * exclusive to IP over 1394 (RFC 2734). IP capable nodes are required
+ * to be IRM capable and have a max_rec of 8 or more. We use this fact
+ * to narrow down to which nodes we send Broadcast_Channel updates.
+ */
+ if (!device->irmc || device->max_rec < 8)
+ return;
+
+ /*
+ * Some 1394-1995 nodes crash if this 1394a-2000 register is written.
+ * Perform a read test first.
+ */
if (device->bc_implemented == BC_UNKNOWN) {
rcode = fw_run_transaction(card, TCODE_READ_QUADLET_REQUEST,
device->node_id, generation, device->max_speed,
@@ -794,6 +884,14 @@
}
}
+int fw_device_set_broadcast_channel(struct device *dev, void *gen)
+{
+ if (is_fw_device(dev))
+ set_broadcast_channel(fw_device(dev), (long)gen);
+
+ return 0;
+}
+
static void fw_device_init(struct work_struct *work)
{
struct fw_device *device =
@@ -849,9 +947,13 @@
device->device.devt = MKDEV(fw_cdev_major, minor);
dev_set_name(&device->device, "fw%d", minor);
+ BUILD_BUG_ON(ARRAY_SIZE(device->attribute_group.attrs) <
+ ARRAY_SIZE(fw_device_attributes) +
+ ARRAY_SIZE(config_rom_attributes));
init_fw_attribute_group(&device->device,
fw_device_attributes,
&device->attribute_group);
+
if (device_add(&device->device)) {
fw_error("Failed to add device.\n");
goto error_with_cdev;
@@ -888,7 +990,7 @@
1 << device->max_speed);
device->config_rom_retries = 0;
- fw_device_set_broadcast_channel(device, device->generation);
+ set_broadcast_channel(device, device->generation);
}
/*
@@ -993,6 +1095,9 @@
create_units(device);
+ /* Userspace may want to re-read attributes. */
+ kobject_uevent(&device->device.kobj, KOBJ_CHANGE);
+
if (atomic_cmpxchg(&device->state,
FW_DEVICE_INITIALIZING,
FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
@@ -1042,6 +1147,7 @@
device->node = fw_node_get(node);
device->node_id = node->node_id;
device->generation = card->generation;
+ device->is_local = node == card->local_node;
mutex_init(&device->client_list_mutex);
INIT_LIST_HEAD(&device->client_list);
@@ -1075,7 +1181,7 @@
FW_DEVICE_INITIALIZING) == FW_DEVICE_RUNNING) {
PREPARE_DELAYED_WORK(&device->work, fw_device_refresh);
schedule_delayed_work(&device->work,
- node == card->local_node ? 0 : INITIAL_DELAY);
+ device->is_local ? 0 : INITIAL_DELAY);
}
break;
diff --git a/drivers/firewire/fw-iso.c b/drivers/firewire/core-iso.c
similarity index 98%
rename from drivers/firewire/fw-iso.c
rename to drivers/firewire/core-iso.c
index 2baf100..28076c8 100644
--- a/drivers/firewire/fw-iso.c
+++ b/drivers/firewire/core-iso.c
@@ -22,14 +22,16 @@
#include <linux/dma-mapping.h>
#include <linux/errno.h>
+#include <linux/firewire.h>
#include <linux/firewire-constants.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/vmalloc.h>
-#include "fw-topology.h"
-#include "fw-transaction.h"
+#include <asm/byteorder.h>
+
+#include "core.h"
/*
* Isochronous DMA context management
diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/core-topology.c
similarity index 97%
rename from drivers/firewire/fw-topology.c
rename to drivers/firewire/core-topology.c
index d0deecc..fddf2b3 100644
--- a/drivers/firewire/fw-topology.c
+++ b/drivers/firewire/core-topology.c
@@ -18,13 +18,22 @@
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-#include <linux/module.h>
-#include <linux/wait.h>
+#include <linux/bug.h>
#include <linux/errno.h>
-#include <asm/bug.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+
+#include <asm/atomic.h>
#include <asm/system.h>
-#include "fw-transaction.h"
-#include "fw-topology.h"
+
+#include "core.h"
#define SELF_ID_PHY_ID(q) (((q) >> 24) & 0x3f)
#define SELF_ID_EXTENDED(q) (((q) >> 23) & 0x01)
@@ -37,6 +46,11 @@
#define SELF_ID_EXT_SEQUENCE(q) (((q) >> 20) & 0x07)
+#define SELFID_PORT_CHILD 0x3
+#define SELFID_PORT_PARENT 0x2
+#define SELFID_PORT_NCONN 0x1
+#define SELFID_PORT_NONE 0x0
+
static u32 *count_ports(u32 *sid, int *total_port_count, int *child_port_count)
{
u32 q;
diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/core-transaction.c
similarity index 97%
rename from drivers/firewire/fw-transaction.c
rename to drivers/firewire/core-transaction.c
index 283dac6..479b22f 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/core-transaction.c
@@ -18,24 +18,28 @@
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include <linux/bug.h>
#include <linux/completion.h>
-#include <linux/idr.h>
-#include <linux/kernel.h>
-#include <linux/kref.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
+#include <linux/fs.h>
#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/poll.h>
+#include <linux/idr.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
#include <linux/list.h>
-#include <linux/kthread.h>
-#include <asm/uaccess.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/types.h>
-#include "fw-transaction.h"
-#include "fw-topology.h"
-#include "fw-device.h"
+#include <asm/byteorder.h>
+
+#include "core.h"
#define HEADER_PRI(pri) ((pri) << 0)
#define HEADER_TCODE(tcode) ((tcode) << 4)
@@ -60,6 +64,10 @@
#define HEADER_DESTINATION_IS_BROADCAST(q) \
(((q) & HEADER_DESTINATION(0x3f)) == HEADER_DESTINATION(0x3f))
+#define PHY_PACKET_CONFIG 0x0
+#define PHY_PACKET_LINK_ON 0x1
+#define PHY_PACKET_SELF_ID 0x2
+
#define PHY_CONFIG_GAP_COUNT(gap_count) (((gap_count) << 16) | (1 << 22))
#define PHY_CONFIG_ROOT_ID(node_id) ((((node_id) & 0x3f) << 24) | (1 << 23))
#define PHY_IDENTIFIER(id) ((id) << 30)
@@ -74,7 +82,7 @@
list_for_each_entry(t, &card->transaction_list, link) {
if (t == transaction) {
list_del(&t->link);
- card->tlabel_mask &= ~(1 << t->tlabel);
+ card->tlabel_mask &= ~(1ULL << t->tlabel);
break;
}
}
@@ -280,14 +288,14 @@
spin_lock_irqsave(&card->lock, flags);
tlabel = card->current_tlabel;
- if (card->tlabel_mask & (1 << tlabel)) {
+ if (card->tlabel_mask & (1ULL << tlabel)) {
spin_unlock_irqrestore(&card->lock, flags);
callback(card, RCODE_SEND_ERROR, NULL, 0, callback_data);
return;
}
- card->current_tlabel = (card->current_tlabel + 1) & 0x1f;
- card->tlabel_mask |= (1 << tlabel);
+ card->current_tlabel = (card->current_tlabel + 1) & 0x3f;
+ card->tlabel_mask |= (1ULL << tlabel);
t->node_id = destination_id;
t->tlabel = tlabel;
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h
new file mode 100644
index 0000000..0a25a7b
--- /dev/null
+++ b/drivers/firewire/core.h
@@ -0,0 +1,293 @@
+#ifndef _FIREWIRE_CORE_H
+#define _FIREWIRE_CORE_H
+
+#include <linux/dma-mapping.h>
+#include <linux/fs.h>
+#include <linux/list.h>
+#include <linux/idr.h>
+#include <linux/mm_types.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <asm/atomic.h>
+
+struct device;
+struct fw_card;
+struct fw_device;
+struct fw_iso_buffer;
+struct fw_iso_context;
+struct fw_iso_packet;
+struct fw_node;
+struct fw_packet;
+
+
+/* -card */
+
+/* bitfields within the PHY registers */
+#define PHY_LINK_ACTIVE 0x80
+#define PHY_CONTENDER 0x40
+#define PHY_BUS_RESET 0x40
+#define PHY_BUS_SHORT_RESET 0x40
+
+#define BANDWIDTH_AVAILABLE_INITIAL 4915
+#define BROADCAST_CHANNEL_INITIAL (1 << 31 | 31)
+#define BROADCAST_CHANNEL_VALID (1 << 30)
+
+struct fw_card_driver {
+ /*
+ * Enable the given card with the given initial config rom.
+ * This function is expected to activate the card, and either
+ * enable the PHY or set the link_on bit and initiate a bus
+ * reset.
+ */
+ int (*enable)(struct fw_card *card, u32 *config_rom, size_t length);
+
+ int (*update_phy_reg)(struct fw_card *card, int address,
+ int clear_bits, int set_bits);
+
+ /*
+ * Update the config rom for an enabled card. This function
+ * should change the config rom that is presented on the bus
+ * an initiate a bus reset.
+ */
+ int (*set_config_rom)(struct fw_card *card,
+ u32 *config_rom, size_t length);
+
+ void (*send_request)(struct fw_card *card, struct fw_packet *packet);
+ void (*send_response)(struct fw_card *card, struct fw_packet *packet);
+ /* Calling cancel is valid once a packet has been submitted. */
+ int (*cancel_packet)(struct fw_card *card, struct fw_packet *packet);
+
+ /*
+ * Allow the specified node ID to do direct DMA out and in of
+ * host memory. The card will disable this for all node when
+ * a bus reset happens, so driver need to reenable this after
+ * bus reset. Returns 0 on success, -ENODEV if the card
+ * doesn't support this, -ESTALE if the generation doesn't
+ * match.
+ */
+ int (*enable_phys_dma)(struct fw_card *card,
+ int node_id, int generation);
+
+ u64 (*get_bus_time)(struct fw_card *card);
+
+ struct fw_iso_context *
+ (*allocate_iso_context)(struct fw_card *card,
+ int type, int channel, size_t header_size);
+ void (*free_iso_context)(struct fw_iso_context *ctx);
+
+ int (*start_iso)(struct fw_iso_context *ctx,
+ s32 cycle, u32 sync, u32 tags);
+
+ int (*queue_iso)(struct fw_iso_context *ctx,
+ struct fw_iso_packet *packet,
+ struct fw_iso_buffer *buffer,
+ unsigned long payload);
+
+ int (*stop_iso)(struct fw_iso_context *ctx);
+};
+
+void fw_card_initialize(struct fw_card *card,
+ const struct fw_card_driver *driver, struct device *device);
+int fw_card_add(struct fw_card *card,
+ u32 max_receive, u32 link_speed, u64 guid);
+void fw_core_remove_card(struct fw_card *card);
+int fw_core_initiate_bus_reset(struct fw_card *card, int short_reset);
+int fw_compute_block_crc(u32 *block);
+void fw_schedule_bm_work(struct fw_card *card, unsigned long delay);
+
+struct fw_descriptor {
+ struct list_head link;
+ size_t length;
+ u32 immediate;
+ u32 key;
+ const u32 *data;
+};
+
+int fw_core_add_descriptor(struct fw_descriptor *desc);
+void fw_core_remove_descriptor(struct fw_descriptor *desc);
+
+
+/* -cdev */
+
+extern const struct file_operations fw_device_ops;
+
+void fw_device_cdev_update(struct fw_device *device);
+void fw_device_cdev_remove(struct fw_device *device);
+
+
+/* -device */
+
+extern struct rw_semaphore fw_device_rwsem;
+extern struct idr fw_device_idr;
+extern int fw_cdev_major;
+
+struct fw_device *fw_device_get_by_devt(dev_t devt);
+int fw_device_set_broadcast_channel(struct device *dev, void *gen);
+void fw_node_event(struct fw_card *card, struct fw_node *node, int event);
+
+
+/* -iso */
+
+/*
+ * The iso packet format allows for an immediate header/payload part
+ * stored in 'header' immediately after the packet info plus an
+ * indirect payload part that is pointer to by the 'payload' field.
+ * Applications can use one or the other or both to implement simple
+ * low-bandwidth streaming (e.g. audio) or more advanced
+ * scatter-gather streaming (e.g. assembling video frame automatically).
+ */
+struct fw_iso_packet {
+ u16 payload_length; /* Length of indirect payload. */
+ u32 interrupt:1; /* Generate interrupt on this packet */
+ u32 skip:1; /* Set to not send packet at all. */
+ u32 tag:2;
+ u32 sy:4;
+ u32 header_length:8; /* Length of immediate header. */
+ u32 header[0];
+};
+
+#define FW_ISO_CONTEXT_TRANSMIT 0
+#define FW_ISO_CONTEXT_RECEIVE 1
+
+#define FW_ISO_CONTEXT_MATCH_TAG0 1
+#define FW_ISO_CONTEXT_MATCH_TAG1 2
+#define FW_ISO_CONTEXT_MATCH_TAG2 4
+#define FW_ISO_CONTEXT_MATCH_TAG3 8
+#define FW_ISO_CONTEXT_MATCH_ALL_TAGS 15
+
+/*
+ * An iso buffer is just a set of pages mapped for DMA in the
+ * specified direction. Since the pages are to be used for DMA, they
+ * are not mapped into the kernel virtual address space. We store the
+ * DMA address in the page private. The helper function
+ * fw_iso_buffer_map() will map the pages into a given vma.
+ */
+struct fw_iso_buffer {
+ enum dma_data_direction direction;
+ struct page **pages;
+ int page_count;
+};
+
+typedef void (*fw_iso_callback_t)(struct fw_iso_context *context,
+ u32 cycle, size_t header_length,
+ void *header, void *data);
+
+struct fw_iso_context {
+ struct fw_card *card;
+ int type;
+ int channel;
+ int speed;
+ size_t header_size;
+ fw_iso_callback_t callback;
+ void *callback_data;
+};
+
+int fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
+ int page_count, enum dma_data_direction direction);
+int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma);
+void fw_iso_buffer_destroy(struct fw_iso_buffer *buffer, struct fw_card *card);
+
+struct fw_iso_context *fw_iso_context_create(struct fw_card *card,
+ int type, int channel, int speed, size_t header_size,
+ fw_iso_callback_t callback, void *callback_data);
+int fw_iso_context_queue(struct fw_iso_context *ctx,
+ struct fw_iso_packet *packet,
+ struct fw_iso_buffer *buffer,
+ unsigned long payload);
+int fw_iso_context_start(struct fw_iso_context *ctx,
+ int cycle, int sync, int tags);
+int fw_iso_context_stop(struct fw_iso_context *ctx);
+void fw_iso_context_destroy(struct fw_iso_context *ctx);
+
+void fw_iso_resource_manage(struct fw_card *card, int generation,
+ u64 channels_mask, int *channel, int *bandwidth, bool allocate);
+
+
+/* -topology */
+
+enum {
+ FW_NODE_CREATED,
+ FW_NODE_UPDATED,
+ FW_NODE_DESTROYED,
+ FW_NODE_LINK_ON,
+ FW_NODE_LINK_OFF,
+ FW_NODE_INITIATED_RESET,
+};
+
+struct fw_node {
+ u16 node_id;
+ u8 color;
+ u8 port_count;
+ u8 link_on:1;
+ u8 initiated_reset:1;
+ u8 b_path:1;
+ u8 phy_speed:2; /* As in the self ID packet. */
+ u8 max_speed:2; /* Minimum of all phy-speeds on the path from the
+ * local node to this node. */
+ u8 max_depth:4; /* Maximum depth to any leaf node */
+ u8 max_hops:4; /* Max hops in this sub tree */
+ atomic_t ref_count;
+
+ /* For serializing node topology into a list. */
+ struct list_head link;
+
+ /* Upper layer specific data. */
+ void *data;
+
+ struct fw_node *ports[0];
+};
+
+static inline struct fw_node *fw_node_get(struct fw_node *node)
+{
+ atomic_inc(&node->ref_count);
+
+ return node;
+}
+
+static inline void fw_node_put(struct fw_node *node)
+{
+ if (atomic_dec_and_test(&node->ref_count))
+ kfree(node);
+}
+
+void fw_core_handle_bus_reset(struct fw_card *card, int node_id,
+ int generation, int self_id_count, u32 *self_ids);
+void fw_destroy_nodes(struct fw_card *card);
+
+/*
+ * Check whether new_generation is the immediate successor of old_generation.
+ * Take counter roll-over at 255 (as per OHCI) into account.
+ */
+static inline bool is_next_generation(int new_generation, int old_generation)
+{
+ return (new_generation & 0xff) == ((old_generation + 1) & 0xff);
+}
+
+
+/* -transaction */
+
+#define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4)
+#define TCODE_IS_BLOCK_PACKET(tcode) (((tcode) & 1) != 0)
+#define TCODE_IS_REQUEST(tcode) (((tcode) & 2) == 0)
+#define TCODE_IS_RESPONSE(tcode) (((tcode) & 2) != 0)
+#define TCODE_HAS_REQUEST_DATA(tcode) (((tcode) & 12) != 4)
+#define TCODE_HAS_RESPONSE_DATA(tcode) (((tcode) & 12) != 0)
+
+#define LOCAL_BUS 0xffc0
+
+void fw_core_handle_request(struct fw_card *card, struct fw_packet *request);
+void fw_core_handle_response(struct fw_card *card, struct fw_packet *packet);
+void fw_fill_response(struct fw_packet *response, u32 *request_header,
+ int rcode, void *payload, size_t length);
+void fw_flush_transactions(struct fw_card *card);
+void fw_send_phy_config(struct fw_card *card,
+ int node_id, int generation, int gap_count);
+
+static inline int fw_stream_packet_destination_id(int tag, int channel, int sy)
+{
+ return tag << 14 | channel << 8 | sy;
+}
+
+#endif /* _FIREWIRE_CORE_H */
diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h
deleted file mode 100644
index 9758893..0000000
--- a/drivers/firewire/fw-device.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Kristian Hoegsberg <krh@bitplanet.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __fw_device_h
-#define __fw_device_h
-
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/idr.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/rwsem.h>
-#include <linux/sysfs.h>
-#include <linux/types.h>
-#include <linux/workqueue.h>
-
-#include <asm/atomic.h>
-
-enum fw_device_state {
- FW_DEVICE_INITIALIZING,
- FW_DEVICE_RUNNING,
- FW_DEVICE_GONE,
- FW_DEVICE_SHUTDOWN,
-};
-
-struct fw_attribute_group {
- struct attribute_group *groups[2];
- struct attribute_group group;
- struct attribute *attrs[11];
-};
-
-struct fw_node;
-struct fw_card;
-
-/*
- * Note, fw_device.generation always has to be read before fw_device.node_id.
- * Use SMP memory barriers to ensure this. Otherwise requests will be sent
- * to an outdated node_id if the generation was updated in the meantime due
- * to a bus reset.
- *
- * Likewise, fw-core will take care to update .node_id before .generation so
- * that whenever fw_device.generation is current WRT the actual bus generation,
- * fw_device.node_id is guaranteed to be current too.
- *
- * The same applies to fw_device.card->node_id vs. fw_device.generation.
- *
- * fw_device.config_rom and fw_device.config_rom_length may be accessed during
- * the lifetime of any fw_unit belonging to the fw_device, before device_del()
- * was called on the last fw_unit. Alternatively, they may be accessed while
- * holding fw_device_rwsem.
- */
-struct fw_device {
- atomic_t state;
- struct fw_node *node;
- int node_id;
- int generation;
- unsigned max_speed;
- struct fw_card *card;
- struct device device;
-
- struct mutex client_list_mutex;
- struct list_head client_list;
-
- u32 *config_rom;
- size_t config_rom_length;
- int config_rom_retries;
- unsigned cmc:1;
- unsigned bc_implemented:2;
-
- struct delayed_work work;
- struct fw_attribute_group attribute_group;
-};
-
-static inline struct fw_device *fw_device(struct device *dev)
-{
- return container_of(dev, struct fw_device, device);
-}
-
-static inline int fw_device_is_shutdown(struct fw_device *device)
-{
- return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN;
-}
-
-static inline struct fw_device *fw_device_get(struct fw_device *device)
-{
- get_device(&device->device);
-
- return device;
-}
-
-static inline void fw_device_put(struct fw_device *device)
-{
- put_device(&device->device);
-}
-
-struct fw_device *fw_device_get_by_devt(dev_t devt);
-int fw_device_enable_phys_dma(struct fw_device *device);
-void fw_device_set_broadcast_channel(struct fw_device *device, int generation);
-
-void fw_device_cdev_update(struct fw_device *device);
-void fw_device_cdev_remove(struct fw_device *device);
-
-extern struct rw_semaphore fw_device_rwsem;
-extern struct idr fw_device_idr;
-extern int fw_cdev_major;
-
-/*
- * fw_unit.directory must not be accessed after device_del(&fw_unit.device).
- */
-struct fw_unit {
- struct device device;
- u32 *directory;
- struct fw_attribute_group attribute_group;
-};
-
-static inline struct fw_unit *fw_unit(struct device *dev)
-{
- return container_of(dev, struct fw_unit, device);
-}
-
-static inline struct fw_unit *fw_unit_get(struct fw_unit *unit)
-{
- get_device(&unit->device);
-
- return unit;
-}
-
-static inline void fw_unit_put(struct fw_unit *unit)
-{
- put_device(&unit->device);
-}
-
-#define CSR_OFFSET 0x40
-#define CSR_LEAF 0x80
-#define CSR_DIRECTORY 0xc0
-
-#define CSR_DESCRIPTOR 0x01
-#define CSR_VENDOR 0x03
-#define CSR_HARDWARE_VERSION 0x04
-#define CSR_NODE_CAPABILITIES 0x0c
-#define CSR_UNIT 0x11
-#define CSR_SPECIFIER_ID 0x12
-#define CSR_VERSION 0x13
-#define CSR_DEPENDENT_INFO 0x14
-#define CSR_MODEL 0x17
-#define CSR_INSTANCE 0x18
-#define CSR_DIRECTORY_ID 0x20
-
-struct fw_csr_iterator {
- u32 *p;
- u32 *end;
-};
-
-void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 *p);
-int fw_csr_iterator_next(struct fw_csr_iterator *ci,
- int *key, int *value);
-
-#define FW_MATCH_VENDOR 0x0001
-#define FW_MATCH_MODEL 0x0002
-#define FW_MATCH_SPECIFIER_ID 0x0004
-#define FW_MATCH_VERSION 0x0008
-
-struct fw_device_id {
- u32 match_flags;
- u32 vendor;
- u32 model;
- u32 specifier_id;
- u32 version;
- void *driver_data;
-};
-
-struct fw_driver {
- struct device_driver driver;
- /* Called when the parent device sits through a bus reset. */
- void (*update) (struct fw_unit *unit);
- const struct fw_device_id *id_table;
-};
-
-static inline struct fw_driver *fw_driver(struct device_driver *drv)
-{
- return container_of(drv, struct fw_driver, driver);
-}
-
-extern const struct file_operations fw_device_ops;
-
-#endif /* __fw_device_h */
diff --git a/drivers/firewire/fw-topology.h b/drivers/firewire/fw-topology.h
deleted file mode 100644
index 3c497bb..0000000
--- a/drivers/firewire/fw-topology.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __fw_topology_h
-#define __fw_topology_h
-
-#include <linux/list.h>
-#include <linux/slab.h>
-
-#include <asm/atomic.h>
-
-enum {
- FW_NODE_CREATED,
- FW_NODE_UPDATED,
- FW_NODE_DESTROYED,
- FW_NODE_LINK_ON,
- FW_NODE_LINK_OFF,
- FW_NODE_INITIATED_RESET,
-};
-
-struct fw_node {
- u16 node_id;
- u8 color;
- u8 port_count;
- u8 link_on : 1;
- u8 initiated_reset : 1;
- u8 b_path : 1;
- u8 phy_speed : 2; /* As in the self ID packet. */
- u8 max_speed : 2; /* Minimum of all phy-speeds on the path from the
- * local node to this node. */
- u8 max_depth : 4; /* Maximum depth to any leaf node */
- u8 max_hops : 4; /* Max hops in this sub tree */
- atomic_t ref_count;
-
- /* For serializing node topology into a list. */
- struct list_head link;
-
- /* Upper layer specific data. */
- void *data;
-
- struct fw_node *ports[0];
-};
-
-static inline struct fw_node *fw_node_get(struct fw_node *node)
-{
- atomic_inc(&node->ref_count);
-
- return node;
-}
-
-static inline void fw_node_put(struct fw_node *node)
-{
- if (atomic_dec_and_test(&node->ref_count))
- kfree(node);
-}
-
-struct fw_card;
-void fw_destroy_nodes(struct fw_card *card);
-
-int fw_compute_block_crc(u32 *block);
-
-#endif /* __fw_topology_h */
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h
deleted file mode 100644
index dfa7990..0000000
--- a/drivers/firewire/fw-transaction.h
+++ /dev/null
@@ -1,446 +0,0 @@
-/*
- * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __fw_transaction_h
-#define __fw_transaction_h
-
-#include <linux/completion.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/firewire-constants.h>
-#include <linux/kref.h>
-#include <linux/list.h>
-#include <linux/spinlock_types.h>
-#include <linux/timer.h>
-#include <linux/types.h>
-#include <linux/workqueue.h>
-
-#define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4)
-#define TCODE_IS_BLOCK_PACKET(tcode) (((tcode) & 1) != 0)
-#define TCODE_IS_REQUEST(tcode) (((tcode) & 2) == 0)
-#define TCODE_IS_RESPONSE(tcode) (((tcode) & 2) != 0)
-#define TCODE_HAS_REQUEST_DATA(tcode) (((tcode) & 12) != 4)
-#define TCODE_HAS_RESPONSE_DATA(tcode) (((tcode) & 12) != 0)
-
-#define LOCAL_BUS 0xffc0
-
-#define SELFID_PORT_CHILD 0x3
-#define SELFID_PORT_PARENT 0x2
-#define SELFID_PORT_NCONN 0x1
-#define SELFID_PORT_NONE 0x0
-
-#define PHY_PACKET_CONFIG 0x0
-#define PHY_PACKET_LINK_ON 0x1
-#define PHY_PACKET_SELF_ID 0x2
-
-/* Bit fields _within_ the PHY registers. */
-#define PHY_LINK_ACTIVE 0x80
-#define PHY_CONTENDER 0x40
-#define PHY_BUS_RESET 0x40
-#define PHY_BUS_SHORT_RESET 0x40
-
-#define CSR_REGISTER_BASE 0xfffff0000000ULL
-
-/* register offsets relative to CSR_REGISTER_BASE */
-#define CSR_STATE_CLEAR 0x0
-#define CSR_STATE_SET 0x4
-#define CSR_NODE_IDS 0x8
-#define CSR_RESET_START 0xc
-#define CSR_SPLIT_TIMEOUT_HI 0x18
-#define CSR_SPLIT_TIMEOUT_LO 0x1c
-#define CSR_CYCLE_TIME 0x200
-#define CSR_BUS_TIME 0x204
-#define CSR_BUSY_TIMEOUT 0x210
-#define CSR_BUS_MANAGER_ID 0x21c
-#define CSR_BANDWIDTH_AVAILABLE 0x220
-#define CSR_CHANNELS_AVAILABLE 0x224
-#define CSR_CHANNELS_AVAILABLE_HI 0x224
-#define CSR_CHANNELS_AVAILABLE_LO 0x228
-#define CSR_BROADCAST_CHANNEL 0x234
-#define CSR_CONFIG_ROM 0x400
-#define CSR_CONFIG_ROM_END 0x800
-#define CSR_FCP_COMMAND 0xB00
-#define CSR_FCP_RESPONSE 0xD00
-#define CSR_FCP_END 0xF00
-#define CSR_TOPOLOGY_MAP 0x1000
-#define CSR_TOPOLOGY_MAP_END 0x1400
-#define CSR_SPEED_MAP 0x2000
-#define CSR_SPEED_MAP_END 0x3000
-
-#define BANDWIDTH_AVAILABLE_INITIAL 4915
-#define BROADCAST_CHANNEL_INITIAL (1 << 31 | 31)
-#define BROADCAST_CHANNEL_VALID (1 << 30)
-
-#define fw_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, ## args)
-#define fw_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args)
-
-static inline void fw_memcpy_from_be32(void *_dst, void *_src, size_t size)
-{
- u32 *dst = _dst;
- __be32 *src = _src;
- int i;
-
- for (i = 0; i < size / 4; i++)
- dst[i] = be32_to_cpu(src[i]);
-}
-
-static inline void fw_memcpy_to_be32(void *_dst, void *_src, size_t size)
-{
- fw_memcpy_from_be32(_dst, _src, size);
-}
-
-struct fw_card;
-struct fw_packet;
-struct fw_node;
-struct fw_request;
-
-struct fw_descriptor {
- struct list_head link;
- size_t length;
- u32 immediate;
- u32 key;
- const u32 *data;
-};
-
-int fw_core_add_descriptor(struct fw_descriptor *desc);
-void fw_core_remove_descriptor(struct fw_descriptor *desc);
-
-typedef void (*fw_packet_callback_t)(struct fw_packet *packet,
- struct fw_card *card, int status);
-
-typedef void (*fw_transaction_callback_t)(struct fw_card *card, int rcode,
- void *data, size_t length,
- void *callback_data);
-
-/*
- * Important note: The callback must guarantee that either fw_send_response()
- * or kfree() is called on the @request.
- */
-typedef void (*fw_address_callback_t)(struct fw_card *card,
- struct fw_request *request,
- int tcode, int destination, int source,
- int generation, int speed,
- unsigned long long offset,
- void *data, size_t length,
- void *callback_data);
-
-struct fw_packet {
- int speed;
- int generation;
- u32 header[4];
- size_t header_length;
- void *payload;
- size_t payload_length;
- dma_addr_t payload_bus;
- u32 timestamp;
-
- /*
- * This callback is called when the packet transmission has
- * completed; for successful transmission, the status code is
- * the ack received from the destination, otherwise it's a
- * negative errno: ENOMEM, ESTALE, ETIMEDOUT, ENODEV, EIO.
- * The callback can be called from tasklet context and thus
- * must never block.
- */
- fw_packet_callback_t callback;
- int ack;
- struct list_head link;
- void *driver_data;
-};
-
-struct fw_transaction {
- int node_id; /* The generation is implied; it is always the current. */
- int tlabel;
- int timestamp;
- struct list_head link;
-
- struct fw_packet packet;
-
- /*
- * The data passed to the callback is valid only during the
- * callback.
- */
- fw_transaction_callback_t callback;
- void *callback_data;
-};
-
-struct fw_address_handler {
- u64 offset;
- size_t length;
- fw_address_callback_t address_callback;
- void *callback_data;
- struct list_head link;
-};
-
-struct fw_address_region {
- u64 start;
- u64 end;
-};
-
-extern const struct fw_address_region fw_high_memory_region;
-
-int fw_core_add_address_handler(struct fw_address_handler *handler,
- const struct fw_address_region *region);
-void fw_core_remove_address_handler(struct fw_address_handler *handler);
-void fw_fill_response(struct fw_packet *response, u32 *request_header,
- int rcode, void *payload, size_t length);
-void fw_send_response(struct fw_card *card,
- struct fw_request *request, int rcode);
-
-extern struct bus_type fw_bus_type;
-
-struct fw_card {
- const struct fw_card_driver *driver;
- struct device *device;
- struct kref kref;
- struct completion done;
-
- int node_id;
- int generation;
- int current_tlabel, tlabel_mask;
- struct list_head transaction_list;
- struct timer_list flush_timer;
- unsigned long reset_jiffies;
-
- unsigned long long guid;
- unsigned max_receive;
- int link_speed;
- int config_rom_generation;
-
- spinlock_t lock; /* Take this lock when handling the lists in
- * this struct. */
- struct fw_node *local_node;
- struct fw_node *root_node;
- struct fw_node *irm_node;
- u8 color; /* must be u8 to match the definition in struct fw_node */
- int gap_count;
- bool beta_repeaters_present;
-
- int index;
-
- struct list_head link;
-
- /* Work struct for BM duties. */
- struct delayed_work work;
- int bm_retries;
- int bm_generation;
-
- bool broadcast_channel_allocated;
- u32 broadcast_channel;
- u32 topology_map[(CSR_TOPOLOGY_MAP_END - CSR_TOPOLOGY_MAP) / 4];
-};
-
-static inline struct fw_card *fw_card_get(struct fw_card *card)
-{
- kref_get(&card->kref);
-
- return card;
-}
-
-void fw_card_release(struct kref *kref);
-
-static inline void fw_card_put(struct fw_card *card)
-{
- kref_put(&card->kref, fw_card_release);
-}
-
-extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay);
-
-/*
- * Check whether new_generation is the immediate successor of old_generation.
- * Take counter roll-over at 255 (as per to OHCI) into account.
- */
-static inline bool is_next_generation(int new_generation, int old_generation)
-{
- return (new_generation & 0xff) == ((old_generation + 1) & 0xff);
-}
-
-/*
- * The iso packet format allows for an immediate header/payload part
- * stored in 'header' immediately after the packet info plus an
- * indirect payload part that is pointer to by the 'payload' field.
- * Applications can use one or the other or both to implement simple
- * low-bandwidth streaming (e.g. audio) or more advanced
- * scatter-gather streaming (e.g. assembling video frame automatically).
- */
-
-struct fw_iso_packet {
- u16 payload_length; /* Length of indirect payload. */
- u32 interrupt : 1; /* Generate interrupt on this packet */
- u32 skip : 1; /* Set to not send packet at all. */
- u32 tag : 2;
- u32 sy : 4;
- u32 header_length : 8; /* Length of immediate header. */
- u32 header[0];
-};
-
-#define FW_ISO_CONTEXT_TRANSMIT 0
-#define FW_ISO_CONTEXT_RECEIVE 1
-
-#define FW_ISO_CONTEXT_MATCH_TAG0 1
-#define FW_ISO_CONTEXT_MATCH_TAG1 2
-#define FW_ISO_CONTEXT_MATCH_TAG2 4
-#define FW_ISO_CONTEXT_MATCH_TAG3 8
-#define FW_ISO_CONTEXT_MATCH_ALL_TAGS 15
-
-struct fw_iso_context;
-
-typedef void (*fw_iso_callback_t)(struct fw_iso_context *context,
- u32 cycle, size_t header_length,
- void *header, void *data);
-
-/*
- * An iso buffer is just a set of pages mapped for DMA in the
- * specified direction. Since the pages are to be used for DMA, they
- * are not mapped into the kernel virtual address space. We store the
- * DMA address in the page private. The helper function
- * fw_iso_buffer_map() will map the pages into a given vma.
- */
-
-struct fw_iso_buffer {
- enum dma_data_direction direction;
- struct page **pages;
- int page_count;
-};
-
-struct fw_iso_context {
- struct fw_card *card;
- int type;
- int channel;
- int speed;
- size_t header_size;
- fw_iso_callback_t callback;
- void *callback_data;
-};
-
-int fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
- int page_count, enum dma_data_direction direction);
-int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma);
-void fw_iso_buffer_destroy(struct fw_iso_buffer *buffer, struct fw_card *card);
-
-struct fw_iso_context *fw_iso_context_create(struct fw_card *card,
- int type, int channel, int speed, size_t header_size,
- fw_iso_callback_t callback, void *callback_data);
-int fw_iso_context_queue(struct fw_iso_context *ctx,
- struct fw_iso_packet *packet,
- struct fw_iso_buffer *buffer,
- unsigned long payload);
-int fw_iso_context_start(struct fw_iso_context *ctx,
- int cycle, int sync, int tags);
-int fw_iso_context_stop(struct fw_iso_context *ctx);
-void fw_iso_context_destroy(struct fw_iso_context *ctx);
-
-void fw_iso_resource_manage(struct fw_card *card, int generation,
- u64 channels_mask, int *channel, int *bandwidth, bool allocate);
-
-struct fw_card_driver {
- /*
- * Enable the given card with the given initial config rom.
- * This function is expected to activate the card, and either
- * enable the PHY or set the link_on bit and initiate a bus
- * reset.
- */
- int (*enable)(struct fw_card *card, u32 *config_rom, size_t length);
-
- int (*update_phy_reg)(struct fw_card *card, int address,
- int clear_bits, int set_bits);
-
- /*
- * Update the config rom for an enabled card. This function
- * should change the config rom that is presented on the bus
- * an initiate a bus reset.
- */
- int (*set_config_rom)(struct fw_card *card,
- u32 *config_rom, size_t length);
-
- void (*send_request)(struct fw_card *card, struct fw_packet *packet);
- void (*send_response)(struct fw_card *card, struct fw_packet *packet);
- /* Calling cancel is valid once a packet has been submitted. */
- int (*cancel_packet)(struct fw_card *card, struct fw_packet *packet);
-
- /*
- * Allow the specified node ID to do direct DMA out and in of
- * host memory. The card will disable this for all node when
- * a bus reset happens, so driver need to reenable this after
- * bus reset. Returns 0 on success, -ENODEV if the card
- * doesn't support this, -ESTALE if the generation doesn't
- * match.
- */
- int (*enable_phys_dma)(struct fw_card *card,
- int node_id, int generation);
-
- u64 (*get_bus_time)(struct fw_card *card);
-
- struct fw_iso_context *
- (*allocate_iso_context)(struct fw_card *card,
- int type, int channel, size_t header_size);
- void (*free_iso_context)(struct fw_iso_context *ctx);
-
- int (*start_iso)(struct fw_iso_context *ctx,
- s32 cycle, u32 sync, u32 tags);
-
- int (*queue_iso)(struct fw_iso_context *ctx,
- struct fw_iso_packet *packet,
- struct fw_iso_buffer *buffer,
- unsigned long payload);
-
- int (*stop_iso)(struct fw_iso_context *ctx);
-};
-
-int fw_core_initiate_bus_reset(struct fw_card *card, int short_reset);
-
-void fw_send_request(struct fw_card *card, struct fw_transaction *t,
- int tcode, int destination_id, int generation, int speed,
- unsigned long long offset, void *payload, size_t length,
- fw_transaction_callback_t callback, void *callback_data);
-int fw_cancel_transaction(struct fw_card *card,
- struct fw_transaction *transaction);
-void fw_flush_transactions(struct fw_card *card);
-int fw_run_transaction(struct fw_card *card, int tcode, int destination_id,
- int generation, int speed, unsigned long long offset,
- void *payload, size_t length);
-void fw_send_phy_config(struct fw_card *card,
- int node_id, int generation, int gap_count);
-
-static inline int fw_stream_packet_destination_id(int tag, int channel, int sy)
-{
- return tag << 14 | channel << 8 | sy;
-}
-
-/*
- * Called by the topology code to inform the device code of node
- * activity; found, lost, or updated nodes.
- */
-void fw_node_event(struct fw_card *card, struct fw_node *node, int event);
-
-/* API used by card level drivers */
-
-void fw_card_initialize(struct fw_card *card,
- const struct fw_card_driver *driver, struct device *device);
-int fw_card_add(struct fw_card *card,
- u32 max_receive, u32 link_speed, u64 guid);
-void fw_core_remove_card(struct fw_card *card);
-void fw_core_handle_bus_reset(struct fw_card *card, int node_id,
- int generation, int self_id_count, u32 *self_ids);
-void fw_core_handle_request(struct fw_card *card, struct fw_packet *request);
-void fw_core_handle_response(struct fw_card *card, struct fw_packet *packet);
-
-extern int fw_irm_set_broadcast_channel_register(struct device *dev,
- void *data);
-
-#endif /* __fw_transaction_h */
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/ohci.c
similarity index 99%
rename from drivers/firewire/fw-ohci.c
rename to drivers/firewire/ohci.c
index 1180d0b..ecddd11 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/ohci.c
@@ -20,17 +20,25 @@
#include <linux/compiler.h>
#include <linux/delay.h>
+#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/list.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <asm/atomic.h>
+#include <asm/byteorder.h>
#include <asm/page.h>
#include <asm/system.h>
@@ -38,8 +46,8 @@
#include <asm/pmac_feature.h>
#endif
-#include "fw-ohci.h"
-#include "fw-transaction.h"
+#include "core.h"
+#include "ohci.h"
#define DESCRIPTOR_OUTPUT_MORE 0
#define DESCRIPTOR_OUTPUT_LAST (1 << 12)
@@ -178,7 +186,7 @@
int node_id;
int generation;
int request_generation; /* for timestamping incoming requests */
- u32 bus_seconds;
+ atomic_t bus_seconds;
bool use_dualbuffer;
bool old_uninorth;
@@ -231,7 +239,6 @@
#define OHCI1394_MAX_AT_RESP_RETRIES 0x2
#define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8
-#define FW_OHCI_MAJOR 240
#define OHCI1394_REGISTER_SIZE 0x800
#define OHCI_LOOP_COUNT 500
#define OHCI1394_PCI_HCI_Control 0x40
@@ -1434,7 +1441,7 @@
if (event & OHCI1394_cycle64Seconds) {
cycle_time = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
if ((cycle_time & 0x80000000) == 0)
- ohci->bus_seconds++;
+ atomic_inc(&ohci->bus_seconds);
}
return IRQ_HANDLED;
@@ -1770,7 +1777,7 @@
u64 bus_time;
cycle_time = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
- bus_time = ((u64) ohci->bus_seconds << 32) | cycle_time;
+ bus_time = ((u64)atomic_read(&ohci->bus_seconds) << 32) | cycle_time;
return bus_time;
}
diff --git a/drivers/firewire/fw-ohci.h b/drivers/firewire/ohci.h
similarity index 98%
rename from drivers/firewire/fw-ohci.h
rename to drivers/firewire/ohci.h
index a2fbb62..ba492d8 100644
--- a/drivers/firewire/fw-ohci.h
+++ b/drivers/firewire/ohci.h
@@ -1,5 +1,5 @@
-#ifndef __fw_ohci_h
-#define __fw_ohci_h
+#ifndef _FIREWIRE_OHCI_H
+#define _FIREWIRE_OHCI_H
/* OHCI register map */
@@ -154,4 +154,4 @@
#define OHCI1394_phy_tcode 0xe
-#endif /* __fw_ohci_h */
+#endif /* _FIREWIRE_OHCI_H */
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/sbp2.c
similarity index 96%
rename from drivers/firewire/fw-sbp2.c
rename to drivers/firewire/sbp2.c
index 2bcf515..24c4563 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -30,18 +30,28 @@
#include <linux/blkdev.h>
#include <linux/bug.h>
+#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/list.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/stringify.h>
-#include <linux/timer.h>
#include <linux/workqueue.h>
+
+#include <asm/byteorder.h>
#include <asm/system.h>
#include <scsi/scsi.h>
@@ -49,10 +59,6 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
-#include "fw-device.h"
-#include "fw-topology.h"
-#include "fw-transaction.h"
-
/*
* So far only bridges from Oxford Semiconductor are known to support
* concurrent logins. Depending on firmware, four or two concurrent logins
@@ -174,6 +180,11 @@
int blocked; /* ditto */
};
+static struct fw_device *target_device(struct sbp2_target *tgt)
+{
+ return fw_parent_device(tgt->unit);
+}
+
/* Impossible login_id, to detect logout attempt before successful login */
#define INVALID_LOGIN_ID 0x10000
@@ -482,7 +493,7 @@
static void sbp2_send_orb(struct sbp2_orb *orb, struct sbp2_logical_unit *lu,
int node_id, int generation, u64 offset)
{
- struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+ struct fw_device *device = target_device(lu->tgt);
unsigned long flags;
orb->pointer.high = 0;
@@ -504,7 +515,7 @@
static int sbp2_cancel_orbs(struct sbp2_logical_unit *lu)
{
- struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+ struct fw_device *device = target_device(lu->tgt);
struct sbp2_orb *orb, *next;
struct list_head list;
unsigned long flags;
@@ -542,7 +553,7 @@
int generation, int function,
int lun_or_login_id, void *response)
{
- struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+ struct fw_device *device = target_device(lu->tgt);
struct sbp2_management_orb *orb;
unsigned int timeout;
int retval = -ENOMEM;
@@ -638,7 +649,7 @@
static void sbp2_agent_reset(struct sbp2_logical_unit *lu)
{
- struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+ struct fw_device *device = target_device(lu->tgt);
__be32 d = 0;
fw_run_transaction(device->card, TCODE_WRITE_QUADLET_REQUEST,
@@ -655,7 +666,7 @@
static void sbp2_agent_reset_no_wait(struct sbp2_logical_unit *lu)
{
- struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+ struct fw_device *device = target_device(lu->tgt);
struct fw_transaction *t;
static __be32 d;
@@ -694,7 +705,7 @@
static void sbp2_conditionally_block(struct sbp2_logical_unit *lu)
{
struct sbp2_target *tgt = lu->tgt;
- struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+ struct fw_card *card = target_device(tgt)->card;
struct Scsi_Host *shost =
container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
unsigned long flags;
@@ -718,7 +729,7 @@
static void sbp2_conditionally_unblock(struct sbp2_logical_unit *lu)
{
struct sbp2_target *tgt = lu->tgt;
- struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+ struct fw_card *card = target_device(tgt)->card;
struct Scsi_Host *shost =
container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
unsigned long flags;
@@ -743,7 +754,7 @@
*/
static void sbp2_unblock(struct sbp2_target *tgt)
{
- struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+ struct fw_card *card = target_device(tgt)->card;
struct Scsi_Host *shost =
container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
unsigned long flags;
@@ -773,7 +784,7 @@
struct Scsi_Host *shost =
container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
struct scsi_device *sdev;
- struct fw_device *device = fw_device(tgt->unit->device.parent);
+ struct fw_device *device = target_device(tgt);
/* prevent deadlocks */
sbp2_unblock(tgt);
@@ -846,7 +857,7 @@
*/
static void sbp2_set_busy_timeout(struct sbp2_logical_unit *lu)
{
- struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+ struct fw_device *device = target_device(lu->tgt);
__be32 d = cpu_to_be32(SBP2_CYCLE_LIMIT | SBP2_RETRY_LIMIT);
fw_run_transaction(device->card, TCODE_WRITE_QUADLET_REQUEST,
@@ -862,7 +873,7 @@
struct sbp2_logical_unit *lu =
container_of(work, struct sbp2_logical_unit, work.work);
struct sbp2_target *tgt = lu->tgt;
- struct fw_device *device = fw_device(tgt->unit->device.parent);
+ struct fw_device *device = target_device(tgt);
struct Scsi_Host *shost;
struct scsi_device *sdev;
struct sbp2_login_response response;
@@ -1110,7 +1121,7 @@
static int sbp2_probe(struct device *dev)
{
struct fw_unit *unit = fw_unit(dev);
- struct fw_device *device = fw_device(unit->device.parent);
+ struct fw_device *device = fw_parent_device(unit);
struct sbp2_target *tgt;
struct sbp2_logical_unit *lu;
struct Scsi_Host *shost;
@@ -1125,7 +1136,7 @@
return -ENOMEM;
tgt = (struct sbp2_target *)shost->hostdata;
- unit->device.driver_data = tgt;
+ dev_set_drvdata(&unit->device, tgt);
tgt->unit = unit;
kref_init(&tgt->kref);
INIT_LIST_HEAD(&tgt->lu_list);
@@ -1180,7 +1191,7 @@
static int sbp2_remove(struct device *dev)
{
struct fw_unit *unit = fw_unit(dev);
- struct sbp2_target *tgt = unit->device.driver_data;
+ struct sbp2_target *tgt = dev_get_drvdata(&unit->device);
sbp2_target_put(tgt);
return 0;
@@ -1191,7 +1202,7 @@
struct sbp2_logical_unit *lu =
container_of(work, struct sbp2_logical_unit, work.work);
struct sbp2_target *tgt = lu->tgt;
- struct fw_device *device = fw_device(tgt->unit->device.parent);
+ struct fw_device *device = target_device(tgt);
int generation, node_id, local_node_id;
if (fw_device_is_shutdown(device))
@@ -1240,10 +1251,10 @@
static void sbp2_update(struct fw_unit *unit)
{
- struct sbp2_target *tgt = unit->device.driver_data;
+ struct sbp2_target *tgt = dev_get_drvdata(&unit->device);
struct sbp2_logical_unit *lu;
- fw_device_enable_phys_dma(fw_device(unit->device.parent));
+ fw_device_enable_phys_dma(fw_parent_device(unit));
/*
* Fw-core serializes sbp2_update() against sbp2_remove().
@@ -1259,9 +1270,10 @@
#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e
#define SBP2_SW_VERSION_ENTRY 0x00010483
-static const struct fw_device_id sbp2_id_table[] = {
+static const struct ieee1394_device_id sbp2_id_table[] = {
{
- .match_flags = FW_MATCH_SPECIFIER_ID | FW_MATCH_VERSION,
+ .match_flags = IEEE1394_MATCH_SPECIFIER_ID |
+ IEEE1394_MATCH_VERSION,
.specifier_id = SBP2_UNIT_SPEC_ID_ENTRY,
.version = SBP2_SW_VERSION_ENTRY,
},
@@ -1335,7 +1347,7 @@
{
struct sbp2_command_orb *orb =
container_of(base_orb, struct sbp2_command_orb, base);
- struct fw_device *device = fw_device(orb->lu->tgt->unit->device.parent);
+ struct fw_device *device = target_device(orb->lu->tgt);
int result;
if (status != NULL) {
@@ -1442,7 +1454,7 @@
static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
{
struct sbp2_logical_unit *lu = cmd->device->hostdata;
- struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+ struct fw_device *device = target_device(lu->tgt);
struct sbp2_command_orb *orb;
int generation, retval = SCSI_MLQUEUE_HOST_BUSY;
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index 05aa2d4..d5ea8a6 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -31,8 +31,12 @@
* information is necessary as for the resource tree.
*/
struct firmware_map_entry {
- resource_size_t start; /* start of the memory range */
- resource_size_t end; /* end of the memory range (incl.) */
+ /*
+ * start and end must be u64 rather than resource_size_t, because e820
+ * resources can lie at addresses above 4G.
+ */
+ u64 start; /* start of the memory range */
+ u64 end; /* end of the memory range (incl.) */
const char *type; /* type of the memory range */
struct list_head list; /* entry for the linked list */
struct kobject kobj; /* kobject for each entry */
@@ -101,7 +105,7 @@
* Common implementation of firmware_map_add() and firmware_map_add_early()
* which expects a pre-allocated struct firmware_map_entry.
**/
-static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
+static int firmware_map_add_entry(u64 start, u64 end,
const char *type,
struct firmware_map_entry *entry)
{
@@ -132,8 +136,7 @@
*
* Returns 0 on success, or -ENOMEM if no memory could be allocated.
**/
-int firmware_map_add(resource_size_t start, resource_size_t end,
- const char *type)
+int firmware_map_add(u64 start, u64 end, const char *type)
{
struct firmware_map_entry *entry;
@@ -157,8 +160,7 @@
*
* Returns 0 on success, or -ENOMEM if no memory could be allocated.
**/
-int __init firmware_map_add_early(resource_size_t start, resource_size_t end,
- const char *type)
+int __init firmware_map_add_early(u64 start, u64 end, const char *type)
{
struct firmware_map_entry *entry;
diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index c77c6c6..6ce0e26 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -105,7 +105,7 @@
ent = debugfs_create_file(files[i].name, S_IFREG | S_IRUGO,
root, tmp, &drm_debugfs_fops);
if (!ent) {
- DRM_ERROR("Cannot create /debugfs/dri/%s/%s\n",
+ DRM_ERROR("Cannot create /sys/kernel/debug/dri/%s/%s\n",
name, files[i].name);
drm_free(tmp, sizeof(struct drm_info_node),
_DRM_DRIVER);
@@ -133,9 +133,9 @@
* \param minor device minor number
* \param root DRI debugfs dir entry.
*
- * Create the DRI debugfs root entry "/debugfs/dri", the device debugfs root entry
- * "/debugfs/dri/%minor%/", and each entry in debugfs_list as
- * "/debugfs/dri/%minor%/%name%".
+ * Create the DRI debugfs root entry "/sys/kernel/debug/dri", the device debugfs root entry
+ * "/sys/kernel/debug/dri/%minor%/", and each entry in debugfs_list as
+ * "/sys/kernel/debug/dri/%minor%/%name%".
*/
int drm_debugfs_init(struct drm_minor *minor, int minor_id,
struct dentry *root)
@@ -148,7 +148,7 @@
sprintf(name, "%d", minor_id);
minor->debugfs_root = debugfs_create_dir(name, root);
if (!minor->debugfs_root) {
- DRM_ERROR("Cannot create /debugfs/dri/%s\n", name);
+ DRM_ERROR("Cannot create /sys/kernel/debug/dri/%s\n", name);
return -1;
}
@@ -165,7 +165,7 @@
ret = dev->driver->debugfs_init(minor);
if (ret) {
DRM_ERROR("DRM: Driver failed to initialize "
- "/debugfs/dri.\n");
+ "/sys/kernel/debug/dri.\n");
return ret;
}
}
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 019b7c5..1bf7efd 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -339,7 +339,7 @@
drm_debugfs_root = debugfs_create_dir("dri", NULL);
if (!drm_debugfs_root) {
- DRM_ERROR("Cannot create /debugfs/dri\n");
+ DRM_ERROR("Cannot create /sys/kernel/debug/dri\n");
ret = -1;
goto err_p3;
}
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 8905068..387a8de 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -343,7 +343,7 @@
#if defined(CONFIG_DEBUG_FS)
ret = drm_debugfs_init(new_minor, minor_id, drm_debugfs_root);
if (ret) {
- DRM_ERROR("DRM: Failed to initialize /debugfs/dri.\n");
+ DRM_ERROR("DRM: Failed to initialize /sys/kernel/debug/dri.\n");
goto err_g2;
}
#endif
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 9987ab8..85ec31b 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -70,6 +70,11 @@
CORE_MINOR, CORE_PATCHLEVEL, CORE_DATE);
}
+static char *drm_nodename(struct device *dev)
+{
+ return kasprintf(GFP_KERNEL, "dri/%s", dev_name(dev));
+}
+
static CLASS_ATTR(version, S_IRUGO, version_show, NULL);
/**
@@ -101,6 +106,8 @@
if (err)
goto err_out_class;
+ class->nodename = drm_nodename;
+
return class;
err_out_class:
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 0ecf6b7..8e28e59 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -504,6 +504,14 @@
info->fbops = &intelfb_ops;
info->fix.line_length = fb->pitch;
+
+ /* setup aperture base/size for vesafb takeover */
+ info->aperture_base = dev->mode_config.fb_base;
+ if (IS_I9XX(dev))
+ info->aperture_size = pci_resource_len(dev->pdev, 2);
+ else
+ info->aperture_size = pci_resource_len(dev->pdev, 0);
+
info->fix.smem_start = dev->mode_config.fb_base + obj_priv->gtt_offset;
info->fix.smem_len = size;
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index e9b436d..9e94215 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -850,8 +850,14 @@
#endif
};
+static char *hiddev_nodename(struct device *dev)
+{
+ return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
static struct usb_class_driver hiddev_class = {
.name = "hiddev%d",
+ .nodename = hiddev_nodename,
.fops = &hiddev_fops,
.minor_base = HIDDEV_MINOR_BASE,
};
@@ -955,7 +961,6 @@
return -ENODEV;
}
-
static /* const */ struct usb_driver hiddev_driver = {
.name = "hiddev",
.probe = hiddev_usbd_probe,
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index f8090e1..2d50166 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -950,6 +950,7 @@
config SENSORS_LIS3LV02D
tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
depends on ACPI && INPUT
+ select INPUT_POLLDEV
select NEW_LEDS
select LEDS_CLASS
default n
@@ -977,6 +978,7 @@
config SENSORS_LIS3_SPI
tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
depends on !ACPI && SPI_MASTER && INPUT
+ select INPUT_POLLDEV
default n
help
This driver provides support for the LIS3LV02Dx accelerometer connected
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index abca7e9..6679854 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -27,9 +27,6 @@
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/kthread.h>
-#include <linux/semaphore.h>
#include <linux/delay.h>
#include <linux/wait.h>
#include <linux/poll.h>
@@ -161,6 +158,7 @@
static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3};
static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3};
static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3};
+static struct axis_conversion lis3lv02d_axis_xy_swap = {2, 1, 3};
static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3};
static struct axis_conversion lis3lv02d_axis_xy_rotated_left_usd = {-2, 1, -3};
static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3};
@@ -194,13 +192,16 @@
AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted),
AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted),
AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted),
+ AXIS_DMI_MATCH("NC2710", "HP Compaq 2710", xy_swap),
AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted),
AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
AXIS_DMI_MATCH("HP2140", "HP 2140", xy_swap_inverted),
AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd),
AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
- AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted),
+ AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted),
+ AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted),
+ AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right),
/* Intel-based HP Pavilion dv5 */
AXIS_DMI_MATCH2("HPDV5_I",
PRODUCT_NAME, "HP Pavilion dv5",
@@ -216,7 +217,6 @@
{ NULL, }
/* Laptop models without axis info (yet):
* "NC6910" "HP Compaq 6910"
- * HP Compaq 8710x Notebook PC / Mobile Workstation
* "NC2400" "HP Compaq nc2400"
* "NX74x0" "HP Compaq nx74"
* "NX6325" "HP Compaq nx6325"
@@ -324,7 +324,7 @@
flush_work(&hpled_led.work);
led_classdev_unregister(&hpled_led.led_classdev);
- return lis3lv02d_remove_fs();
+ return lis3lv02d_remove_fs(&lis3_dev);
}
@@ -338,13 +338,7 @@
static int lis3lv02d_resume(struct acpi_device *device)
{
- /* put back the device in the right state (ACPI might turn it on) */
- mutex_lock(&lis3_dev.lock);
- if (lis3_dev.usage > 0)
- lis3lv02d_poweron(&lis3_dev);
- else
- lis3lv02d_poweroff(&lis3_dev);
- mutex_unlock(&lis3_dev.lock);
+ lis3lv02d_poweron(&lis3_dev);
return 0;
}
#else
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 778eb77..271338b 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -27,9 +27,7 @@
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/kthread.h>
-#include <linux/semaphore.h>
+#include <linux/input-polldev.h>
#include <linux/delay.h>
#include <linux/wait.h>
#include <linux/poll.h>
@@ -105,56 +103,39 @@
{
int position[3];
- position[0] = lis3_dev.read_data(lis3, OUTX);
- position[1] = lis3_dev.read_data(lis3, OUTY);
- position[2] = lis3_dev.read_data(lis3, OUTZ);
+ position[0] = lis3->read_data(lis3, OUTX);
+ position[1] = lis3->read_data(lis3, OUTY);
+ position[2] = lis3->read_data(lis3, OUTZ);
- *x = lis3lv02d_get_axis(lis3_dev.ac.x, position);
- *y = lis3lv02d_get_axis(lis3_dev.ac.y, position);
- *z = lis3lv02d_get_axis(lis3_dev.ac.z, position);
+ *x = lis3lv02d_get_axis(lis3->ac.x, position);
+ *y = lis3lv02d_get_axis(lis3->ac.y, position);
+ *z = lis3lv02d_get_axis(lis3->ac.z, position);
}
void lis3lv02d_poweroff(struct lis3lv02d *lis3)
{
- lis3_dev.is_on = 0;
+ /* disable X,Y,Z axis and power down */
+ lis3->write(lis3, CTRL_REG1, 0x00);
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
void lis3lv02d_poweron(struct lis3lv02d *lis3)
{
- lis3_dev.is_on = 1;
- lis3_dev.init(lis3);
+ u8 reg;
+
+ lis3->init(lis3);
+
+ /*
+ * Common configuration
+ * BDU: LSB and MSB values are not updated until both have been read.
+ * So the value read will always be correct.
+ */
+ lis3->read(lis3, CTRL_REG2, ®);
+ reg |= CTRL2_BDU;
+ lis3->write(lis3, CTRL_REG2, reg);
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
-/*
- * To be called before starting to use the device. It makes sure that the
- * device will always be on until a call to lis3lv02d_decrease_use(). Not to be
- * used from interrupt context.
- */
-static void lis3lv02d_increase_use(struct lis3lv02d *dev)
-{
- mutex_lock(&dev->lock);
- dev->usage++;
- if (dev->usage == 1) {
- if (!dev->is_on)
- lis3lv02d_poweron(dev);
- }
- mutex_unlock(&dev->lock);
-}
-
-/*
- * To be called whenever a usage of the device is stopped.
- * It will make sure to turn off the device when there is not usage.
- */
-static void lis3lv02d_decrease_use(struct lis3lv02d *dev)
-{
- mutex_lock(&dev->lock);
- dev->usage--;
- if (dev->usage == 0)
- lis3lv02d_poweroff(dev);
- mutex_unlock(&dev->lock);
-}
static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
{
@@ -198,15 +179,12 @@
printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", lis3_dev.irq);
return -EBUSY;
}
- lis3lv02d_increase_use(&lis3_dev);
- printk("lis3: registered interrupt %d\n", lis3_dev.irq);
return 0;
}
static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
{
fasync_helper(-1, file, 0, &lis3_dev.async_queue);
- lis3lv02d_decrease_use(&lis3_dev);
free_irq(lis3_dev.irq, &lis3_dev);
clear_bit(0, &lis3_dev.misc_opened); /* release the device */
return 0;
@@ -290,46 +268,16 @@
.fops = &lis3lv02d_misc_fops,
};
-/**
- * lis3lv02d_joystick_kthread - Kthread polling function
- * @data: unused - here to conform to threadfn prototype
- */
-static int lis3lv02d_joystick_kthread(void *data)
+static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev)
{
int x, y, z;
- while (!kthread_should_stop()) {
- lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
- input_report_abs(lis3_dev.idev, ABS_X, x - lis3_dev.xcalib);
- input_report_abs(lis3_dev.idev, ABS_Y, y - lis3_dev.ycalib);
- input_report_abs(lis3_dev.idev, ABS_Z, z - lis3_dev.zcalib);
-
- input_sync(lis3_dev.idev);
-
- try_to_freeze();
- msleep_interruptible(MDPS_POLL_INTERVAL);
- }
-
- return 0;
+ lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
+ input_report_abs(pidev->input, ABS_X, x - lis3_dev.xcalib);
+ input_report_abs(pidev->input, ABS_Y, y - lis3_dev.ycalib);
+ input_report_abs(pidev->input, ABS_Z, z - lis3_dev.zcalib);
}
-static int lis3lv02d_joystick_open(struct input_dev *input)
-{
- lis3lv02d_increase_use(&lis3_dev);
- lis3_dev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d");
- if (IS_ERR(lis3_dev.kthread)) {
- lis3lv02d_decrease_use(&lis3_dev);
- return PTR_ERR(lis3_dev.kthread);
- }
-
- return 0;
-}
-
-static void lis3lv02d_joystick_close(struct input_dev *input)
-{
- kthread_stop(lis3_dev.kthread);
- lis3lv02d_decrease_use(&lis3_dev);
-}
static inline void lis3lv02d_calibrate_joystick(void)
{
@@ -339,33 +287,36 @@
int lis3lv02d_joystick_enable(void)
{
+ struct input_dev *input_dev;
int err;
if (lis3_dev.idev)
return -EINVAL;
- lis3_dev.idev = input_allocate_device();
+ lis3_dev.idev = input_allocate_polled_device();
if (!lis3_dev.idev)
return -ENOMEM;
+ lis3_dev.idev->poll = lis3lv02d_joystick_poll;
+ lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL;
+ input_dev = lis3_dev.idev->input;
+
lis3lv02d_calibrate_joystick();
- lis3_dev.idev->name = "ST LIS3LV02DL Accelerometer";
- lis3_dev.idev->phys = DRIVER_NAME "/input0";
- lis3_dev.idev->id.bustype = BUS_HOST;
- lis3_dev.idev->id.vendor = 0;
- lis3_dev.idev->dev.parent = &lis3_dev.pdev->dev;
- lis3_dev.idev->open = lis3lv02d_joystick_open;
- lis3_dev.idev->close = lis3lv02d_joystick_close;
+ input_dev->name = "ST LIS3LV02DL Accelerometer";
+ input_dev->phys = DRIVER_NAME "/input0";
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0;
+ input_dev->dev.parent = &lis3_dev.pdev->dev;
- set_bit(EV_ABS, lis3_dev.idev->evbit);
- input_set_abs_params(lis3_dev.idev, ABS_X, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
- input_set_abs_params(lis3_dev.idev, ABS_Y, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
- input_set_abs_params(lis3_dev.idev, ABS_Z, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
+ set_bit(EV_ABS, input_dev->evbit);
+ input_set_abs_params(input_dev, ABS_X, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
+ input_set_abs_params(input_dev, ABS_Y, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
+ input_set_abs_params(input_dev, ABS_Z, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
- err = input_register_device(lis3_dev.idev);
+ err = input_register_polled_device(lis3_dev.idev);
if (err) {
- input_free_device(lis3_dev.idev);
+ input_free_polled_device(lis3_dev.idev);
lis3_dev.idev = NULL;
}
@@ -378,8 +329,9 @@
if (!lis3_dev.idev)
return;
- misc_deregister(&lis3lv02d_misc_device);
- input_unregister_device(lis3_dev.idev);
+ if (lis3_dev.irq)
+ misc_deregister(&lis3lv02d_misc_device);
+ input_unregister_polled_device(lis3_dev.idev);
lis3_dev.idev = NULL;
}
EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable);
@@ -390,9 +342,7 @@
{
int x, y, z;
- lis3lv02d_increase_use(&lis3_dev);
lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
- lis3lv02d_decrease_use(&lis3_dev);
return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
}
@@ -406,9 +356,7 @@
struct device_attribute *attr,
const char *buf, size_t count)
{
- lis3lv02d_increase_use(&lis3_dev);
lis3lv02d_calibrate_joystick();
- lis3lv02d_decrease_use(&lis3_dev);
return count;
}
@@ -420,9 +368,7 @@
u8 ctrl;
int val;
- lis3lv02d_increase_use(&lis3_dev);
lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
- lis3lv02d_decrease_use(&lis3_dev);
val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4;
return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]);
}
@@ -446,17 +392,17 @@
static int lis3lv02d_add_fs(struct lis3lv02d *lis3)
{
- lis3_dev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
- if (IS_ERR(lis3_dev.pdev))
- return PTR_ERR(lis3_dev.pdev);
+ lis3->pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
+ if (IS_ERR(lis3->pdev))
+ return PTR_ERR(lis3->pdev);
- return sysfs_create_group(&lis3_dev.pdev->dev.kobj, &lis3lv02d_attribute_group);
+ return sysfs_create_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group);
}
-int lis3lv02d_remove_fs(void)
+int lis3lv02d_remove_fs(struct lis3lv02d *lis3)
{
- sysfs_remove_group(&lis3_dev.pdev->dev.kobj, &lis3lv02d_attribute_group);
- platform_device_unregister(lis3_dev.pdev);
+ sysfs_remove_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group);
+ platform_device_unregister(lis3->pdev);
return 0;
}
EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
@@ -482,18 +428,35 @@
break;
default:
printk(KERN_ERR DRIVER_NAME
- ": unknown sensor type 0x%X\n", lis3_dev.whoami);
+ ": unknown sensor type 0x%X\n", dev->whoami);
return -EINVAL;
}
- mutex_init(&dev->lock);
lis3lv02d_add_fs(dev);
- lis3lv02d_increase_use(dev);
+ lis3lv02d_poweron(dev);
if (lis3lv02d_joystick_enable())
printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
- printk("lis3_init_device: irq %d\n", dev->irq);
+ /* passing in platform specific data is purely optional and only
+ * used by the SPI transport layer at the moment */
+ if (dev->pdata) {
+ struct lis3lv02d_platform_data *p = dev->pdata;
+
+ if (p->click_flags && (dev->whoami == LIS_SINGLE_ID)) {
+ dev->write(dev, CLICK_CFG, p->click_flags);
+ dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit);
+ dev->write(dev, CLICK_LATENCY, p->click_latency);
+ dev->write(dev, CLICK_WINDOW, p->click_window);
+ dev->write(dev, CLICK_THSZ, p->click_thresh_z & 0xf);
+ dev->write(dev, CLICK_THSY_X,
+ (p->click_thresh_x & 0xf) |
+ (p->click_thresh_y << 4));
+ }
+
+ if (p->irq_cfg)
+ dev->write(dev, CTRL_REG3, p->irq_cfg);
+ }
/* bail if we did not get an IRQ from the bus layer */
if (!dev->irq) {
@@ -502,11 +465,9 @@
goto out;
}
- printk("lis3: registering device\n");
if (misc_register(&lis3lv02d_misc_device))
printk(KERN_ERR DRIVER_NAME ": misc_register failed\n");
out:
- lis3lv02d_decrease_use(dev);
return 0;
}
EXPORT_SYMBOL_GPL(lis3lv02d_init_device);
diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
index 745ec96..e320e2f 100644
--- a/drivers/hwmon/lis3lv02d.h
+++ b/drivers/hwmon/lis3lv02d.h
@@ -18,6 +18,8 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/platform_device.h>
+#include <linux/input-polldev.h>
/*
* The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to
@@ -27,12 +29,14 @@
* They can also be connected via I²C.
*/
+#include <linux/lis3lv02d.h>
+
/* 2-byte registers */
#define LIS_DOUBLE_ID 0x3A /* LIS3LV02D[LQ] */
/* 1-byte registers */
#define LIS_SINGLE_ID 0x3B /* LIS[32]02DL and others */
-enum lis3lv02d_reg {
+enum lis3_reg {
WHO_AM_I = 0x0F,
OFFSET_X = 0x16,
OFFSET_Y = 0x17,
@@ -60,6 +64,19 @@
FF_WU_THS_L = 0x34,
FF_WU_THS_H = 0x35,
FF_WU_DURATION = 0x36,
+};
+
+enum lis302d_reg {
+ CLICK_CFG = 0x38,
+ CLICK_SRC = 0x39,
+ CLICK_THSY_X = 0x3B,
+ CLICK_THSZ = 0x3C,
+ CLICK_TIMELIMIT = 0x3D,
+ CLICK_LATENCY = 0x3E,
+ CLICK_WINDOW = 0x3F,
+};
+
+enum lis3lv02d_reg {
DD_CFG = 0x38,
DD_SRC = 0x39,
DD_ACK = 0x3A,
@@ -169,22 +186,20 @@
s16 (*read_data) (struct lis3lv02d *lis3, int reg);
int mdps_max_val;
- struct input_dev *idev; /* input device */
- struct task_struct *kthread; /* kthread for input */
- struct mutex lock;
+ struct input_polled_dev *idev; /* input device */
struct platform_device *pdev; /* platform device */
atomic_t count; /* interrupt count after last read */
int xcalib; /* calibrated null value for x */
int ycalib; /* calibrated null value for y */
int zcalib; /* calibrated null value for z */
- unsigned char is_on; /* whether the device is on or off */
- unsigned char usage; /* usage counter */
struct axis_conversion ac; /* hw -> logical axis */
u32 irq; /* IRQ number */
struct fasync_struct *async_queue; /* queue for the misc device */
wait_queue_head_t misc_wait; /* Wait queue for the misc device */
unsigned long misc_opened; /* bit0: whether the device is open */
+
+ struct lis3lv02d_platform_data *pdata; /* for passing board config */
};
int lis3lv02d_init_device(struct lis3lv02d *lis3);
@@ -192,6 +207,6 @@
void lis3lv02d_joystick_disable(void);
void lis3lv02d_poweroff(struct lis3lv02d *lis3);
void lis3lv02d_poweron(struct lis3lv02d *lis3);
-int lis3lv02d_remove_fs(void);
+int lis3lv02d_remove_fs(struct lis3lv02d *lis3);
extern struct lis3lv02d lis3_dev;
diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c
index 07ae74b..3827ff0 100644
--- a/drivers/hwmon/lis3lv02d_spi.c
+++ b/drivers/hwmon/lis3lv02d_spi.c
@@ -72,6 +72,7 @@
lis3_dev.write = lis3_spi_write;
lis3_dev.irq = spi->irq;
lis3_dev.ac = lis3lv02d_axis_normal;
+ lis3_dev.pdata = spi->dev.platform_data;
spi_set_drvdata(spi, &lis3_dev);
ret = lis3lv02d_init_device(&lis3_dev);
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index ba1488b..c14ca14 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -3,7 +3,8 @@
int generic_ide_suspend(struct device *dev, pm_message_t mesg)
{
- ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
+ ide_drive_t *drive = dev_get_drvdata(dev);
+ ide_drive_t *pair = ide_get_pair_dev(drive);
ide_hwif_t *hwif = drive->hwif;
struct request *rq;
struct request_pm_state rqpm;
@@ -34,7 +35,8 @@
int generic_ide_resume(struct device *dev)
{
- ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
+ ide_drive_t *drive = dev_get_drvdata(dev);
+ ide_drive_t *pair = ide_get_pair_dev(drive);
ide_hwif_t *hwif = drive->hwif;
struct request *rq;
struct request_pm_state rqpm;
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index f371b0d..79e0af3 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -535,7 +535,7 @@
/* register with global device tree */
dev_set_name(&hwif->gendev, hwif->name);
- hwif->gendev.driver_data = hwif;
+ dev_set_drvdata(&hwif->gendev, hwif);
if (hwif->gendev.parent == NULL)
hwif->gendev.parent = hwif->dev;
hwif->gendev.release = hwif_release_dev;
@@ -987,9 +987,9 @@
int ret;
dev_set_name(dev, "%u.%u", hwif->index, i);
+ dev_set_drvdata(dev, drive);
dev->parent = &hwif->gendev;
dev->bus = &ide_bus_type;
- dev->driver_data = drive;
dev->release = drive_release_dev;
ret = device_register(dev);
diff --git a/drivers/ide/ide_platform.c b/drivers/ide/ide_platform.c
index ee9b55e..b579fbe 100644
--- a/drivers/ide/ide_platform.c
+++ b/drivers/ide/ide_platform.c
@@ -112,7 +112,7 @@
static int __devexit plat_ide_remove(struct platform_device *pdev)
{
- struct ide_host *host = pdev->dev.driver_data;
+ struct ide_host *host = dev_get_drvdata(&pdev->dev);
ide_host_remove(host);
diff --git a/drivers/ieee1394/csr1212.c b/drivers/ieee1394/csr1212.c
index a6dfeb0..e76cac6 100644
--- a/drivers/ieee1394/csr1212.c
+++ b/drivers/ieee1394/csr1212.c
@@ -35,6 +35,7 @@
#include <linux/errno.h>
#include <linux/kernel.h>
+#include <linux/kmemcheck.h>
#include <linux/string.h>
#include <asm/bug.h>
#include <asm/byteorder.h>
@@ -387,6 +388,7 @@
if (!kv)
return NULL;
+ kmemcheck_annotate_variable(kv->value.leaf.data[0]);
CSR1212_DESCRIPTOR_LEAF_SET_TYPE(kv, dtype);
CSR1212_DESCRIPTOR_LEAF_SET_SPECIFIER_ID(kv, specifier_id);
diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c
index 4ca1035..f5c586c 100644
--- a/drivers/ieee1394/eth1394.c
+++ b/drivers/ieee1394/eth1394.c
@@ -361,7 +361,7 @@
node_info->pdg.sz = 0;
node_info->fifo = CSR1212_INVALID_ADDR_SPACE;
- ud->device.driver_data = node_info;
+ dev_set_drvdata(&ud->device, node_info);
new_node->ud = ud;
priv = netdev_priv(hi->dev);
@@ -406,7 +406,7 @@
list_del(&old_node->list);
kfree(old_node);
- node_info = (struct eth1394_node_info*)ud->device.driver_data;
+ node_info = dev_get_drvdata(&ud->device);
spin_lock_irqsave(&node_info->pdg.lock, flags);
/* The partial datagram list should be empty, but we'll just
@@ -416,7 +416,7 @@
spin_unlock_irqrestore(&node_info->pdg.lock, flags);
kfree(node_info);
- ud->device.driver_data = NULL;
+ dev_set_drvdata(&ud->device, NULL);
return 0;
}
@@ -688,7 +688,7 @@
ether1394_reset_priv(dev, 0);
list_for_each_entry(node, &priv->ip_node_list, list) {
- node_info = node->ud->device.driver_data;
+ node_info = dev_get_drvdata(&node->ud->device);
spin_lock_irqsave(&node_info->pdg.lock, flags);
@@ -872,8 +872,7 @@
if (!node)
return cpu_to_be16(0);
- node_info =
- (struct eth1394_node_info *)node->ud->device.driver_data;
+ node_info = dev_get_drvdata(&node->ud->device);
/* Update our speed/payload/fifo_offset table */
node_info->maxpayload = maxpayload;
@@ -1080,7 +1079,7 @@
priv->ud_list[NODEID_TO_NODE(srcid)] = ud;
}
- node_info = (struct eth1394_node_info *)ud->device.driver_data;
+ node_info = dev_get_drvdata(&ud->device);
/* First, did we receive a fragmented or unfragmented datagram? */
hdr->words.word1 = ntohs(hdr->words.word1);
@@ -1617,8 +1616,7 @@
if (!node)
goto fail;
- node_info =
- (struct eth1394_node_info *)node->ud->device.driver_data;
+ node_info = dev_get_drvdata(&node->ud->device);
if (node_info->fifo == CSR1212_INVALID_ADDR_SPACE)
goto fail;
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index a6d55be..5122b5a 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -10,6 +10,7 @@
#include <linux/bitmap.h>
#include <linux/kernel.h>
+#include <linux/kmemcheck.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -39,7 +40,10 @@
struct hpsb_host *host;
nodeid_t nodeid;
unsigned int generation;
+
+ kmemcheck_bitfield_begin(flags);
unsigned int speed_unverified:1;
+ kmemcheck_bitfield_end(flags);
};
@@ -1293,6 +1297,7 @@
u8 *speed;
ci = kmalloc(sizeof(*ci), GFP_KERNEL);
+ kmemcheck_annotate_bitfield(ci, flags);
if (!ci)
return;
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index a51ab23..83b734a 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -718,7 +718,7 @@
struct scsi_device *sdev;
ud = container_of(dev, struct unit_directory, device);
- lu = ud->device.driver_data;
+ lu = dev_get_drvdata(&ud->device);
if (!lu)
return 0;
@@ -746,7 +746,7 @@
static int sbp2_update(struct unit_directory *ud)
{
- struct sbp2_lu *lu = ud->device.driver_data;
+ struct sbp2_lu *lu = dev_get_drvdata(&ud->device);
if (sbp2_reconnect_device(lu) != 0) {
/*
@@ -815,7 +815,7 @@
atomic_set(&lu->state, SBP2LU_STATE_RUNNING);
INIT_WORK(&lu->protocol_work, NULL);
- ud->device.driver_data = lu;
+ dev_set_drvdata(&ud->device, lu);
hi = hpsb_get_hostinfo(&sbp2_highlevel, ud->ne->host);
if (!hi) {
@@ -1051,7 +1051,7 @@
hpsb_unregister_addrspace(&sbp2_highlevel, hi->host,
lu->status_fifo_addr);
- lu->ud->device.driver_data = NULL;
+ dev_set_drvdata(&lu->ud->device, NULL);
module_put(hi->host->driver->owner);
no_hi:
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 5c04cfb..158a214 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -760,9 +760,9 @@
int i;
class_dev->class = &ib_class;
- class_dev->driver_data = device;
class_dev->parent = device->dma_device;
dev_set_name(class_dev, device->name);
+ dev_set_drvdata(class_dev, device);
INIT_LIST_HEAD(&device->port_list);
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index 85905ab..ce4e6ef 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -636,7 +636,7 @@
struct hipz_query_hca *rblock; \
int data; \
\
- shca = dev->driver_data; \
+ shca = dev_get_drvdata(dev); \
\
rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL); \
if (!rblock) { \
@@ -680,7 +680,7 @@
struct device_attribute *attr,
char *buf)
{
- struct ehca_shca *shca = dev->driver_data;
+ struct ehca_shca *shca = dev_get_drvdata(dev);
return sprintf(buf, "%llx\n", shca->ipz_hca_handle.handle);
@@ -749,7 +749,7 @@
shca->ofdev = dev;
shca->ipz_hca_handle.handle = *handle;
- dev->dev.driver_data = shca;
+ dev_set_drvdata(&dev->dev, shca);
ret = ehca_sense_attributes(shca);
if (ret < 0) {
@@ -878,7 +878,7 @@
static int __devexit ehca_remove(struct of_device *dev)
{
- struct ehca_shca *shca = dev->dev.driver_data;
+ struct ehca_shca *shca = dev_get_drvdata(&dev->dev);
unsigned long flags;
int ret;
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 5d445f4..7c237e6 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1265,8 +1265,14 @@
.uevent = input_dev_uevent,
};
+static char *input_nodename(struct device *dev)
+{
+ return kasprintf(GFP_KERNEL, "input/%s", dev_name(dev));
+}
+
struct class input_class = {
.name = "input",
+ .nodename = input_nodename,
};
EXPORT_SYMBOL_GPL(input_class);
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index 356b3a2..1c0b529 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -35,7 +35,7 @@
#include <linux/input.h>
#include <linux/gameport.h>
#include <linux/jiffies.h>
-#include <asm/timex.h>
+#include <linux/timex.h>
#define DRIVER_DESC "Analog joystick and gamepad driver"
diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index d6a30ce..6d67af5 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/input.h>
#include <linux/platform_device.h>
+#include <linux/timex.h>
#include <asm/io.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 69af838..2957d48 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -569,7 +569,7 @@
mutex_init(&wm->codec_mutex);
wm->dev = dev;
- dev->driver_data = wm;
+ dev_set_drvdata(dev, wm);
wm->ac97 = to_ac97_t(dev);
/* check that we have a supported codec */
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c
index 928d2ed..b115726 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/xen-kbdfront.c
@@ -114,7 +114,7 @@
xenbus_dev_fatal(dev, -ENOMEM, "allocating info structure");
return -ENOMEM;
}
- dev->dev.driver_data = info;
+ dev_set_drvdata(&dev->dev, info);
info->xbdev = dev;
info->irq = -1;
snprintf(info->phys, sizeof(info->phys), "xenbus/%s", dev->nodename);
@@ -186,7 +186,7 @@
static int xenkbd_resume(struct xenbus_device *dev)
{
- struct xenkbd_info *info = dev->dev.driver_data;
+ struct xenkbd_info *info = dev_get_drvdata(&dev->dev);
xenkbd_disconnect_backend(info);
memset(info->page, 0, PAGE_SIZE);
@@ -195,7 +195,7 @@
static int xenkbd_remove(struct xenbus_device *dev)
{
- struct xenkbd_info *info = dev->dev.driver_data;
+ struct xenkbd_info *info = dev_get_drvdata(&dev->dev);
xenkbd_disconnect_backend(info);
if (info->kbd)
@@ -266,7 +266,7 @@
static void xenkbd_backend_changed(struct xenbus_device *dev,
enum xenbus_state backend_state)
{
- struct xenkbd_info *info = dev->dev.driver_data;
+ struct xenkbd_info *info = dev_get_drvdata(&dev->dev);
int ret, val;
switch (backend_state) {
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index 823ceba6..1128d3f 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -1513,6 +1513,7 @@
static struct miscdevice _dm_misc = {
.minor = MISC_DYNAMIC_MINOR,
.name = DM_NAME,
+ .devnode = "mapper/control",
.fops = &_ctl_fops
};
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
index bb42d99..b6da9c3 100644
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -48,7 +48,7 @@
"NICAM/A\n"
"NICAM/B\n");
-static char firmware_name[FIRMWARE_NAME_MAX];
+static char firmware_name[30];
module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0);
MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the "
"default firmware name\n");
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index a454ee8..479dd05 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -447,6 +447,15 @@
return 0;
}
+static char *dvb_nodename(struct device *dev)
+{
+ struct dvb_device *dvbdev = dev_get_drvdata(dev);
+
+ return kasprintf(GFP_KERNEL, "dvb/adapter%d/%s%d",
+ dvbdev->adapter->num, dnames[dvbdev->type], dvbdev->id);
+}
+
+
static int __init init_dvbdev(void)
{
int retval;
@@ -469,6 +478,7 @@
goto error;
}
dvb_class->dev_uevent = dvb_uevent;
+ dvb_class->nodename = dvb_nodename;
return 0;
error:
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 9749515..e441d27 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -196,7 +196,7 @@
#define CYPRESS_FX2 3
int usb_ctrl;
int (*download_firmware) (struct usb_device *, const struct firmware *);
- const char firmware[FIRMWARE_NAME_MAX];
+ const char *firmware;
int no_reconnect;
int size_of_priv;
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index ba3709b..ec2f45d 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -747,8 +747,14 @@
.release = dabusb_release,
};
+static char *dabusb_nodename(struct device *dev)
+{
+ return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
static struct usb_class_driver dabusb_class = {
.name = "dabusb%d",
+ .nodename = dabusb_nodename,
.fops = &dabusb_fops,
.minor_base = DABUSB_MINOR,
};
diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c
index 08d3e17..d09ce83 100644
--- a/drivers/media/video/videobuf-dma-contig.c
+++ b/drivers/media/video/videobuf-dma-contig.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mm.h>
+#include <linux/pagemap.h>
#include <linux/dma-mapping.h>
#include <media/videobuf-dma-contig.h>
@@ -25,6 +26,7 @@
void *vaddr;
dma_addr_t dma_handle;
unsigned long size;
+ int is_userptr;
};
#define MAGIC_DC_MEM 0x0733ac61
@@ -108,6 +110,82 @@
.close = videobuf_vm_close,
};
+/**
+ * videobuf_dma_contig_user_put() - reset pointer to user space buffer
+ * @mem: per-buffer private videobuf-dma-contig data
+ *
+ * This function resets the user space pointer
+ */
+static void videobuf_dma_contig_user_put(struct videobuf_dma_contig_memory *mem)
+{
+ mem->is_userptr = 0;
+ mem->dma_handle = 0;
+ mem->size = 0;
+}
+
+/**
+ * videobuf_dma_contig_user_get() - setup user space memory pointer
+ * @mem: per-buffer private videobuf-dma-contig data
+ * @vb: video buffer to map
+ *
+ * This function validates and sets up a pointer to user space memory.
+ * Only physically contiguous pfn-mapped memory is accepted.
+ *
+ * Returns 0 if successful.
+ */
+static int videobuf_dma_contig_user_get(struct videobuf_dma_contig_memory *mem,
+ struct videobuf_buffer *vb)
+{
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma;
+ unsigned long prev_pfn, this_pfn;
+ unsigned long pages_done, user_address;
+ int ret;
+
+ mem->size = PAGE_ALIGN(vb->size);
+ mem->is_userptr = 0;
+ ret = -EINVAL;
+
+ down_read(&mm->mmap_sem);
+
+ vma = find_vma(mm, vb->baddr);
+ if (!vma)
+ goto out_up;
+
+ if ((vb->baddr + mem->size) > vma->vm_end)
+ goto out_up;
+
+ pages_done = 0;
+ prev_pfn = 0; /* kill warning */
+ user_address = vb->baddr;
+
+ while (pages_done < (mem->size >> PAGE_SHIFT)) {
+ ret = follow_pfn(vma, user_address, &this_pfn);
+ if (ret)
+ break;
+
+ if (pages_done == 0)
+ mem->dma_handle = this_pfn << PAGE_SHIFT;
+ else if (this_pfn != (prev_pfn + 1))
+ ret = -EFAULT;
+
+ if (ret)
+ break;
+
+ prev_pfn = this_pfn;
+ user_address += PAGE_SIZE;
+ pages_done++;
+ }
+
+ if (!ret)
+ mem->is_userptr = 1;
+
+ out_up:
+ up_read(¤t->mm->mmap_sem);
+
+ return ret;
+}
+
static void *__videobuf_alloc(size_t size)
{
struct videobuf_dma_contig_memory *mem;
@@ -154,12 +232,11 @@
case V4L2_MEMORY_USERPTR:
dev_dbg(q->dev, "%s memory method USERPTR\n", __func__);
- /* The only USERPTR currently supported is the one needed for
- read() method.
- */
+ /* handle pointer from user space */
if (vb->baddr)
- return -EINVAL;
+ return videobuf_dma_contig_user_get(mem, vb);
+ /* allocate memory for the read() method */
mem->size = PAGE_ALIGN(vb->size);
mem->vaddr = dma_alloc_coherent(q->dev, mem->size,
&mem->dma_handle, GFP_KERNEL);
@@ -386,7 +463,7 @@
So, it should free memory only if the memory were allocated for
read() operation.
*/
- if ((buf->memory != V4L2_MEMORY_USERPTR) || buf->baddr)
+ if (buf->memory != V4L2_MEMORY_USERPTR)
return;
if (!mem)
@@ -394,6 +471,13 @@
MAGIC_CHECK(mem->magic, MAGIC_DC_MEM);
+ /* handle user space pointer case */
+ if (buf->baddr) {
+ videobuf_dma_contig_user_put(mem);
+ return;
+ }
+
+ /* read() method */
dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle);
mem->vaddr = NULL;
}
diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c
index 386da15..cb73051 100644
--- a/drivers/mfd/htc-pasic3.c
+++ b/drivers/mfd/htc-pasic3.c
@@ -35,7 +35,7 @@
*/
void pasic3_write_register(struct device *dev, u32 reg, u8 val)
{
- struct pasic3_data *asic = dev->driver_data;
+ struct pasic3_data *asic = dev_get_drvdata(dev);
int bus_shift = asic->bus_shift;
void __iomem *addr = asic->mapping + (REG_ADDR << bus_shift);
void __iomem *data = asic->mapping + (REG_DATA << bus_shift);
@@ -50,7 +50,7 @@
*/
u8 pasic3_read_register(struct device *dev, u32 reg)
{
- struct pasic3_data *asic = dev->driver_data;
+ struct pasic3_data *asic = dev_get_drvdata(dev);
int bus_shift = asic->bus_shift;
void __iomem *addr = asic->mapping + (REG_ADDR << bus_shift);
void __iomem *data = asic->mapping + (REG_DATA << bus_shift);
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 11a6248..082c197 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -618,7 +618,7 @@
pdev->dev.parent = pcf->dev;
pdev->dev.platform_data = &pdata->reg_init_data[i];
- pdev->dev.driver_data = pcf;
+ dev_set_drvdata(&pdev->dev, pcf);
pcf->regulator_pdev[i] = pdev;
platform_device_add(pdev);
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index cf30d06..7c21bf7 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -265,7 +265,7 @@
mutex_init(&wm8400->io_lock);
- wm8400->dev->driver_data = wm8400;
+ dev_set_drvdata(wm8400->dev, wm8400);
/* Check that this is actually a WM8400 */
ret = wm8400->read_dev(wm8400->io_data, WM8400_RESET_ID, 1, ®);
diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c
index 0207dd5..b5346b4 100644
--- a/drivers/misc/c2port/core.c
+++ b/drivers/misc/c2port/core.c
@@ -15,6 +15,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/kernel.h>
+#include <linux/kmemcheck.h>
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/idr.h>
@@ -891,6 +892,7 @@
return ERR_PTR(-EINVAL);
c2dev = kmalloc(sizeof(struct c2port_device), GFP_KERNEL);
+ kmemcheck_annotate_bitfield(c2dev, flags);
if (unlikely(!c2dev))
return ERR_PTR(-ENOMEM);
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index bbefe77..3ce2920 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -302,7 +302,7 @@
pnode = uv_node_to_pnode(nid);
if (bid < 0 || gru_base[bid])
continue;
- page = alloc_pages_node(nid, GFP_KERNEL, order);
+ page = alloc_pages_exact_node(nid, GFP_KERNEL, order);
if (!page)
goto fail;
gru_base[bid] = page_address(page);
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 9172fcd..c76677a 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -232,7 +232,7 @@
mq->mmr_blade = uv_cpu_to_blade_id(cpu);
nid = cpu_to_node(cpu);
- page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
+ page = alloc_pages_exact_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
pg_order);
if (page == NULL) {
dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d "
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 01f282c..3b63831 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2206,7 +2206,7 @@
depends on SKGE && DEBUG_FS
help
This option adds the ability to dump driver state for debugging.
- The file debugfs/skge/ethX displays the state of the internal
+ The file /sys/kernel/debug/skge/ethX displays the state of the internal
transmit and receive rings.
If unsure, say N.
@@ -2232,7 +2232,7 @@
depends on SKY2 && DEBUG_FS
help
This option adds the ability to dump driver state for debugging.
- The file debugfs/sky2/ethX displays the state of the internal
+ The file /sys/kernel/debug/sky2/ethX displays the state of the internal
transmit and receive rings.
If unsure, say N.
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 811d351..11a0ba4 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1366,6 +1366,7 @@
static struct miscdevice tun_miscdev = {
.minor = TUN_MINOR,
.name = "tun",
+ .devnode = "net/tun",
.fops = &tun_fops,
};
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 1fe5da4..60330f3 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -432,7 +432,7 @@
unsigned ready:1; /* all probing steps done */
unsigned rx_reorder:1; /* RX reorder is enabled */
u8 trace_msg_from_user; /* echo rx msgs to 'trace' pipe */
- /* typed u8 so debugfs/u8 can tweak */
+ /* typed u8 so /sys/kernel/debug/u8 can tweak */
enum i2400m_system_state state;
wait_queue_head_t state_wq; /* Woken up when on state updates */
diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index 509b6f9..daf0c83 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -28,11 +28,10 @@
Say Y, if and you will get debug options for ath5k.
To use this, you need to mount debugfs:
- mkdir /debug/
- mount -t debugfs debug /debug/
+ mount -t debugfs debug /sys/kernel/debug
You will get access to files under:
- /debug/ath5k/phy0/
+ /sys/kernel/debug/ath5k/phy0/
To enable debug, pass the debug level to the debug module
parameter. For example:
diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README
index d860fc3..ab6a2d5 100644
--- a/drivers/net/wireless/libertas/README
+++ b/drivers/net/wireless/libertas/README
@@ -72,7 +72,7 @@
location that is to be read. This parameter must be specified in
hexadecimal (its possible to preceed preceding the number with a "0x").
- Path: /debugfs/libertas_wireless/ethX/registers/
+ Path: /sys/kernel/debug/libertas_wireless/ethX/registers/
Usage:
echo "0xa123" > rdmac ; cat rdmac
@@ -95,7 +95,7 @@
sleepparams
This command is used to set the sleepclock configurations
- Path: /debugfs/libertas_wireless/ethX/
+ Path: /sys/kernel/debug/libertas_wireless/ethX/
Usage:
cat sleepparams: reads the current sleepclock configuration
@@ -115,7 +115,7 @@
The subscribed_events directory contains the interface for the
subscribed events API.
- Path: /debugfs/libertas_wireless/ethX/subscribed_events/
+ Path: /sys/kernel/debug/libertas_wireless/ethX/subscribed_events/
Each event is represented by a filename. Each filename consists of the
following three fields:
@@ -165,7 +165,7 @@
extscan
This command is used to do a specific scan.
- Path: /debugfs/libertas_wireless/ethX/
+ Path: /sys/kernel/debug/libertas_wireless/ethX/
Usage: echo "SSID" > extscan
@@ -179,7 +179,7 @@
Display the current contents of the driver scan table (ie. get the
scan results).
- Path: /debugfs/libertas_wireless/ethX/
+ Path: /sys/kernel/debug/libertas_wireless/ethX/
Usage:
cat getscantable
@@ -188,7 +188,7 @@
Initiate a customized scan and retrieve the results
- Path: /debugfs/libertas_wireless/ethX/
+ Path: /sys/kernel/debug/libertas_wireless/ethX/
Usage:
echo "[ARGS]" > setuserscan
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index f8c2898..06a46d7 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -43,8 +43,8 @@
struct lbs_private *priv;
struct libertas_spi_platform_data *pdata;
- char helper_fw_name[FIRMWARE_NAME_MAX];
- char main_fw_name[FIRMWARE_NAME_MAX];
+ char helper_fw_name[IF_SPI_FW_NAME_MAX];
+ char main_fw_name[IF_SPI_FW_NAME_MAX];
/* The card ID and card revision, as reported by the hardware. */
u16 card_id;
@@ -1019,9 +1019,9 @@
lbs_pr_err("Unsupported chip_id: 0x%02x\n", card_id);
return -EAFNOSUPPORT;
}
- snprintf(helper_fw, FIRMWARE_NAME_MAX, "libertas/gspi%d_hlp.bin",
+ snprintf(helper_fw, IF_SPI_FW_NAME_MAX, "libertas/gspi%d_hlp.bin",
chip_id_to_device_name[i].name);
- snprintf(main_fw, FIRMWARE_NAME_MAX, "libertas/gspi%d.bin",
+ snprintf(main_fw, IF_SPI_FW_NAME_MAX, "libertas/gspi%d.bin",
chip_id_to_device_name[i].name);
return 0;
}
diff --git a/drivers/net/wireless/libertas/if_spi.h b/drivers/net/wireless/libertas/if_spi.h
index 2103869..f87eec4 100644
--- a/drivers/net/wireless/libertas/if_spi.h
+++ b/drivers/net/wireless/libertas/if_spi.h
@@ -22,6 +22,9 @@
#define IF_SPI_CMD_BUF_SIZE 2400
/***************** Firmware *****************/
+
+#define IF_SPI_FW_NAME_MAX 30
+
struct chip_ident {
u16 chip_id;
u16 name;
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index d649cae..1844c5a 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -61,11 +61,9 @@
{
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct if_usb_card *cardp = priv->card;
- char fwname[FIRMWARE_NAME_MAX];
int ret;
- sscanf(buf, "%29s", fwname); /* FIRMWARE_NAME_MAX - 1 = 29 */
- ret = if_usb_prog_firmware(cardp, fwname, BOOT_CMD_UPDATE_FW);
+ ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_FW);
if (ret == 0)
return count;
@@ -88,11 +86,9 @@
{
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct if_usb_card *cardp = priv->card;
- char fwname[FIRMWARE_NAME_MAX];
int ret;
- sscanf(buf, "%29s", fwname); /* FIRMWARE_NAME_MAX - 1 = 29 */
- ret = if_usb_prog_firmware(cardp, fwname, BOOT_CMD_UPDATE_BOOT2);
+ ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_BOOT2);
if (ret == 0)
return count;
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index f673253..8d88dae 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1212,7 +1212,7 @@
}
info = netdev_priv(netdev);
- dev->dev.driver_data = info;
+ dev_set_drvdata(&dev->dev, info);
err = register_netdev(info->netdev);
if (err) {
@@ -1233,7 +1233,7 @@
fail:
free_netdev(netdev);
- dev->dev.driver_data = NULL;
+ dev_set_drvdata(&dev->dev, NULL);
return err;
}
@@ -1275,7 +1275,7 @@
*/
static int netfront_resume(struct xenbus_device *dev)
{
- struct netfront_info *info = dev->dev.driver_data;
+ struct netfront_info *info = dev_get_drvdata(&dev->dev);
dev_dbg(&dev->dev, "%s\n", dev->nodename);
@@ -1600,7 +1600,7 @@
static void backend_changed(struct xenbus_device *dev,
enum xenbus_state backend_state)
{
- struct netfront_info *np = dev->dev.driver_data;
+ struct netfront_info *np = dev_get_drvdata(&dev->dev);
struct net_device *netdev = np->netdev;
dev_dbg(&dev->dev, "%s\n", xenbus_strstate(backend_state));
@@ -1774,7 +1774,7 @@
static int __devexit xennet_remove(struct xenbus_device *dev)
{
- struct netfront_info *info = dev->dev.driver_data;
+ struct netfront_info *info = dev_get_drvdata(&dev->dev);
dev_dbg(&dev->dev, "%s\n", dev->nodename);
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index f415fdd..5b89f40 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -373,7 +373,7 @@
if (result >= 0) {
/* FIXME : Don't enumerate the bus twice. */
eisa_dev.root.dev = &dev->dev;
- dev->dev.driver_data = &eisa_dev.root;
+ dev_set_drvdata(&dev->dev, &eisa_dev.root);
eisa_dev.root.bus_base_addr = 0;
eisa_dev.root.res = &eisa_dev.hba.io_space;
eisa_dev.root.slots = result;
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index e5999c4..d46dd57 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -2010,7 +2010,7 @@
void * sba_get_iommu(struct parisc_device *pci_hba)
{
struct parisc_device *sba_dev = parisc_parent(pci_hba);
- struct sba_device *sba = sba_dev->dev.driver_data;
+ struct sba_device *sba = dev_get_drvdata(&sba_dev->dev);
char t = sba_dev->id.hw_type;
int iocnum = (pci_hba->hw_path >> 3); /* rope # */
@@ -2031,7 +2031,7 @@
void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r)
{
struct parisc_device *sba_dev = parisc_parent(pci_hba);
- struct sba_device *sba = sba_dev->dev.driver_data;
+ struct sba_device *sba = dev_get_drvdata(&sba_dev->dev);
char t = sba_dev->id.hw_type;
int i;
int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1)); /* rope # */
@@ -2073,7 +2073,7 @@
void sba_distributed_lmmio(struct parisc_device *pci_hba, struct resource *r )
{
struct parisc_device *sba_dev = parisc_parent(pci_hba);
- struct sba_device *sba = sba_dev->dev.driver_data;
+ struct sba_device *sba = dev_get_drvdata(&sba_dev->dev);
char t = sba_dev->id.hw_type;
int base, size;
int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1)); /* rope # */
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index ea31a45..5d6de38 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -376,14 +376,14 @@
/* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, NULL);
if (p)
parport_count++;
- dev->dev.driver_data = p;
+ dev_set_drvdata(&dev->dev, p);
return 0;
}
static int __devexit parport_remove_chip(struct parisc_device *dev)
{
- struct parport *p = dev->dev.driver_data;
+ struct parport *p = dev_get_drvdata(&dev->dev);
if (p) {
struct parport_gsc_private *priv = p->private_data;
struct parport_operations *ops = p->ops;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1a91bf9..07bbb9b 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -24,6 +24,11 @@
#include <asm/setup.h>
#include "pci.h"
+const char *pci_power_names[] = {
+ "error", "D0", "D1", "D2", "D3hot", "D3cold", "unknown",
+};
+EXPORT_SYMBOL_GPL(pci_power_names);
+
unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
#ifdef CONFIG_PCI_DOMAINS
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index e399825..13ffdc3 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -275,7 +275,7 @@
memset(device, 0, sizeof(struct device));
device->bus = &pcie_port_bus_type;
device->driver = NULL;
- device->driver_data = NULL;
+ dev_set_drvdata(device, NULL);
device->release = release_pcie_device; /* callback to free pcie dev */
dev_set_name(device, "%s:pcie%02x",
pci_name(parent), get_descriptor_id(port_type, service_type));
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 47cab31..304ff6d 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -394,7 +394,7 @@
p_drv = to_pcmcia_drv(dev->driver);
s = p_dev->socket;
- /* The PCMCIA code passes the match data in via dev->driver_data
+ /* The PCMCIA code passes the match data in via dev_set_drvdata(dev)
* which is an ugly hack. Once the driver probe is called it may
* and often will overwrite the match data so we must save it first
*
@@ -404,7 +404,7 @@
* call which will then check whether there are two
* pseudo devices, and if not, add the second one.
*/
- did = p_dev->dev.driver_data;
+ did = dev_get_drvdata(&p_dev->dev);
ds_dev_dbg(1, dev, "trying to bind to %s\n", p_drv->drv.name);
@@ -499,7 +499,7 @@
* pseudo multi-function card, we need to unbind
* all devices
*/
- did = p_dev->dev.driver_data;
+ did = dev_get_drvdata(&p_dev->dev);
if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
(p_dev->socket->device_count != 0) &&
(p_dev->device_no == 0))
@@ -828,7 +828,6 @@
{
struct pcmcia_socket *s = dev->socket;
const struct firmware *fw;
- char path[FIRMWARE_NAME_MAX];
int ret = -ENOMEM;
int no_funcs;
int old_funcs;
@@ -839,16 +838,7 @@
ds_dev_dbg(1, &dev->dev, "trying to load CIS file %s\n", filename);
- if (strlen(filename) > (FIRMWARE_NAME_MAX - 1)) {
- dev_printk(KERN_WARNING, &dev->dev,
- "pcmcia: CIS filename is too long [%s]\n",
- filename);
- return -EINVAL;
- }
-
- snprintf(path, sizeof(path), "%s", filename);
-
- if (request_firmware(&fw, path, &dev->dev) == 0) {
+ if (request_firmware(&fw, filename, &dev->dev) == 0) {
if (fw->size >= CISTPL_MAX_CIS_SIZE) {
ret = -EINVAL;
dev_printk(KERN_ERR, &dev->dev,
@@ -988,7 +978,7 @@
return 0;
}
- dev->dev.driver_data = (void *) did;
+ dev_set_drvdata(&dev->dev, did);
return 1;
}
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index 1703b20..6095f8d 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -915,12 +915,9 @@
err = -EPERM;
goto free_out;
} else {
- static int printed = 0;
- if (!printed) {
- printk(KERN_WARNING "2.6. kernels use pcmciamtd instead of memory_cs.c and do not require special\n");
- printk(KERN_WARNING "MTD handling any more.\n");
- printed++;
- }
+ printk_once(KERN_WARNING
+ "2.6. kernels use pcmciamtd instead of memory_cs.c and do not require special\n");
+ printk_once(KERN_WARNING "MTD handling any more.\n");
}
err = -EINVAL;
goto free_out;
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index b79f31a..04dc734 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -364,7 +364,7 @@
int cstat, dstat;
int count;
- raw = cdev->dev.driver_data;
+ raw = dev_get_drvdata(&cdev->dev);
req = (struct raw3215_req *) intparm;
cstat = irb->scsw.cmd.cstat;
dstat = irb->scsw.cmd.dstat;
@@ -652,7 +652,7 @@
int line;
/* Console is special. */
- if (raw3215[0] && (cdev->dev.driver_data == raw3215[0]))
+ if (raw3215[0] && (raw3215[0] == dev_get_drvdata(&cdev->dev)))
return 0;
raw = kmalloc(sizeof(struct raw3215_info) +
RAW3215_INBUF_SIZE, GFP_KERNEL|GFP_DMA);
@@ -686,7 +686,7 @@
}
init_waitqueue_head(&raw->empty_wait);
- cdev->dev.driver_data = raw;
+ dev_set_drvdata(&cdev->dev, raw);
cdev->handler = raw3215_irq;
return 0;
@@ -697,9 +697,9 @@
struct raw3215_info *raw;
ccw_device_set_offline(cdev);
- raw = cdev->dev.driver_data;
+ raw = dev_get_drvdata(&cdev->dev);
if (raw) {
- cdev->dev.driver_data = NULL;
+ dev_set_drvdata(&cdev->dev, NULL);
kfree(raw->buffer);
kfree(raw);
}
@@ -709,7 +709,7 @@
{
struct raw3215_info *raw;
- raw = cdev->dev.driver_data;
+ raw = dev_get_drvdata(&cdev->dev);
if (!raw)
return -ENODEV;
@@ -720,7 +720,7 @@
{
struct raw3215_info *raw;
- raw = cdev->dev.driver_data;
+ raw = dev_get_drvdata(&cdev->dev);
if (!raw)
return -ENODEV;
@@ -898,7 +898,7 @@
raw->buffer = (char *) alloc_bootmem_low(RAW3215_BUFFER_SIZE);
raw->inbuf = (char *) alloc_bootmem_low(RAW3215_INBUF_SIZE);
raw->cdev = cdev;
- cdev->dev.driver_data = raw;
+ dev_set_drvdata(&cdev->dev, raw);
cdev->handler = raw3215_irq;
raw->flags |= RAW3215_FIXED;
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 81c151b..acab7b2 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -357,7 +357,7 @@
struct raw3270_request *rq;
int rc;
- rp = (struct raw3270 *) cdev->dev.driver_data;
+ rp = dev_get_drvdata(&cdev->dev);
if (!rp)
return;
rq = (struct raw3270_request *) intparm;
@@ -831,7 +831,7 @@
if (rp->minor == -1)
return -EUSERS;
rp->cdev = cdev;
- cdev->dev.driver_data = rp;
+ dev_set_drvdata(&cdev->dev, rp);
cdev->handler = raw3270_irq;
return 0;
}
@@ -1112,7 +1112,7 @@
/* Disconnect from ccw_device. */
cdev = rp->cdev;
rp->cdev = NULL;
- cdev->dev.driver_data = NULL;
+ dev_set_drvdata(&cdev->dev, NULL);
cdev->handler = NULL;
/* Put ccw_device structure. */
@@ -1136,7 +1136,7 @@
raw3270_model_show(struct device *dev, struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%i\n",
- ((struct raw3270 *) dev->driver_data)->model);
+ ((struct raw3270 *) dev_get_drvdata(dev))->model);
}
static DEVICE_ATTR(model, 0444, raw3270_model_show, NULL);
@@ -1144,7 +1144,7 @@
raw3270_rows_show(struct device *dev, struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%i\n",
- ((struct raw3270 *) dev->driver_data)->rows);
+ ((struct raw3270 *) dev_get_drvdata(dev))->rows);
}
static DEVICE_ATTR(rows, 0444, raw3270_rows_show, NULL);
@@ -1152,7 +1152,7 @@
raw3270_columns_show(struct device *dev, struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%i\n",
- ((struct raw3270 *) dev->driver_data)->cols);
+ ((struct raw3270 *) dev_get_drvdata(dev))->cols);
}
static DEVICE_ATTR(columns, 0444, raw3270_columns_show, NULL);
@@ -1289,7 +1289,7 @@
struct raw3270_view *v;
struct raw3270_notifier *np;
- rp = cdev->dev.driver_data;
+ rp = dev_get_drvdata(&cdev->dev);
/*
* _remove is the opposite of _probe; it's probe that
* should set up rp. raw3270_remove gets entered for
@@ -1337,7 +1337,7 @@
{
struct raw3270 *rp;
- rp = cdev->dev.driver_data;
+ rp = dev_get_drvdata(&cdev->dev);
if (test_bit(RAW3270_FLAGS_CONSOLE, &rp->flags))
return -EBUSY;
raw3270_remove(cdev);
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 144d2a5..5a519fa 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -1289,7 +1289,7 @@
tape_34xx_online(struct ccw_device *cdev)
{
return tape_generic_online(
- cdev->dev.driver_data,
+ dev_get_drvdata(&cdev->dev),
&tape_discipline_34xx
);
}
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index 23e6598..418f72d 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -1703,7 +1703,7 @@
static int
tape_3590_online(struct ccw_device *cdev)
{
- return tape_generic_online(cdev->dev.driver_data,
+ return tape_generic_online(dev_get_drvdata(&cdev->dev),
&tape_discipline_3590);
}
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 3ebaa8e..595aa04 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -92,7 +92,7 @@
{
struct tape_device *tdev;
- tdev = (struct tape_device *) dev->driver_data;
+ tdev = dev_get_drvdata(dev);
return scnprintf(buf, PAGE_SIZE, "%i\n", tdev->medium_state);
}
@@ -104,7 +104,7 @@
{
struct tape_device *tdev;
- tdev = (struct tape_device *) dev->driver_data;
+ tdev = dev_get_drvdata(dev);
return scnprintf(buf, PAGE_SIZE, "%i\n", tdev->first_minor);
}
@@ -116,7 +116,7 @@
{
struct tape_device *tdev;
- tdev = (struct tape_device *) dev->driver_data;
+ tdev = dev_get_drvdata(dev);
return scnprintf(buf, PAGE_SIZE, "%s\n", (tdev->first_minor < 0) ?
"OFFLINE" : tape_state_verbose[tdev->tape_state]);
}
@@ -130,7 +130,7 @@
struct tape_device *tdev;
ssize_t rc;
- tdev = (struct tape_device *) dev->driver_data;
+ tdev = dev_get_drvdata(dev);
if (tdev->first_minor < 0)
return scnprintf(buf, PAGE_SIZE, "N/A\n");
@@ -156,7 +156,7 @@
{
struct tape_device *tdev;
- tdev = (struct tape_device *) dev->driver_data;
+ tdev = dev_get_drvdata(dev);
return scnprintf(buf, PAGE_SIZE, "%i\n", tdev->char_data.block_size);
}
@@ -440,7 +440,7 @@
{
struct tape_device *device;
- device = cdev->dev.driver_data;
+ device = dev_get_drvdata(&cdev->dev);
if (!device) {
return -ENODEV;
}
@@ -583,7 +583,7 @@
tape_put_device(device);
return ret;
}
- cdev->dev.driver_data = device;
+ dev_set_drvdata(&cdev->dev, device);
cdev->handler = __tape_do_irq;
device->cdev = cdev;
ccw_device_get_id(cdev, &dev_id);
@@ -622,7 +622,7 @@
{
struct tape_device * device;
- device = cdev->dev.driver_data;
+ device = dev_get_drvdata(&cdev->dev);
if (!device) {
return;
}
@@ -662,9 +662,9 @@
tape_cleanup_device(device);
}
- if (cdev->dev.driver_data != NULL) {
+ if (!dev_get_drvdata(&cdev->dev)) {
sysfs_remove_group(&cdev->dev.kobj, &tape_attr_group);
- cdev->dev.driver_data = tape_put_device(cdev->dev.driver_data);
+ dev_set_drvdata(&cdev->dev, tape_put_device(dev_get_drvdata(&cdev->dev)));
}
}
@@ -1060,7 +1060,7 @@
struct tape_request *request;
int rc;
- device = (struct tape_device *) cdev->dev.driver_data;
+ device = dev_get_drvdata(&cdev->dev);
if (device == NULL) {
return;
}
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index e925808..411cfa3 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -504,7 +504,7 @@
struct device_attribute *attr,
const char * buf, size_t count)
{
- struct vmlogrdr_priv_t *priv = dev->driver_data;
+ struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
ssize_t ret = count;
switch (buf[0]) {
@@ -525,7 +525,7 @@
struct device_attribute *attr,
char *buf)
{
- struct vmlogrdr_priv_t *priv = dev->driver_data;
+ struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", priv->autopurge);
}
@@ -541,7 +541,7 @@
char cp_command[80];
char cp_response[80];
- struct vmlogrdr_priv_t *priv = dev->driver_data;
+ struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
if (buf[0] != '1')
return -EINVAL;
@@ -578,7 +578,7 @@
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct vmlogrdr_priv_t *priv = dev->driver_data;
+ struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
ssize_t ret = count;
switch (buf[0]) {
@@ -599,7 +599,7 @@
struct device_attribute *attr,
char *buf)
{
- struct vmlogrdr_priv_t *priv = dev->driver_data;
+ struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", priv->autorecording);
}
@@ -612,7 +612,7 @@
struct device_attribute *attr,
const char * buf, size_t count)
{
- struct vmlogrdr_priv_t *priv = dev->driver_data;
+ struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
ssize_t ret;
switch (buf[0]) {
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index 9245821..7d9e67c 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -80,11 +80,11 @@
*
* Each ur device (urd) contains a reference to its corresponding ccw device
* (cdev) using the urd->cdev pointer. Each ccw device has a reference to the
- * ur device using the cdev->dev.driver_data pointer.
+ * ur device using dev_get_drvdata(&cdev->dev) pointer.
*
* urd references:
* - ur_probe gets a urd reference, ur_remove drops the reference
- * (cdev->dev.driver_data)
+ * dev_get_drvdata(&cdev->dev)
* - ur_open gets a urd reference, ur_relase drops the reference
* (urf->urd)
*
@@ -92,7 +92,7 @@
* - urdev_alloc get a cdev reference (urd->cdev)
* - urdev_free drops the cdev reference (urd->cdev)
*
- * Setting and clearing of cdev->dev.driver_data is protected by the ccwdev lock
+ * Setting and clearing of dev_get_drvdata(&cdev->dev) is protected by the ccwdev lock
*/
static struct urdev *urdev_alloc(struct ccw_device *cdev)
{
@@ -131,7 +131,7 @@
unsigned long flags;
spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
- urd = cdev->dev.driver_data;
+ urd = dev_get_drvdata(&cdev->dev);
if (urd)
urdev_get(urd);
spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
@@ -310,7 +310,7 @@
TRACE("ur_int_handler: unsolicited interrupt\n");
return;
}
- urd = cdev->dev.driver_data;
+ urd = dev_get_drvdata(&cdev->dev);
BUG_ON(!urd);
/* On special conditions irb is an error pointer */
if (IS_ERR(irb))
@@ -856,7 +856,7 @@
goto fail_remove_attr;
}
spin_lock_irq(get_ccwdev_lock(cdev));
- cdev->dev.driver_data = urd;
+ dev_set_drvdata(&cdev->dev, urd);
spin_unlock_irq(get_ccwdev_lock(cdev));
mutex_unlock(&vmur_mutex);
@@ -996,8 +996,8 @@
ur_remove_attributes(&cdev->dev);
spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
- urdev_put(cdev->dev.driver_data);
- cdev->dev.driver_data = NULL;
+ urdev_put(dev_get_drvdata(&cdev->dev));
+ dev_set_drvdata(&cdev->dev, NULL);
spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
mutex_unlock(&vmur_mutex);
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index d40f7a9..f370f8d 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -290,7 +290,7 @@
if (!get_device(&cgdev->dev))
return -ENODEV;
privptr = kzalloc(sizeof(struct claw_privbk), GFP_KERNEL);
- cgdev->dev.driver_data = privptr;
+ dev_set_drvdata(&cgdev->dev, privptr);
if (privptr == NULL) {
probe_error(cgdev);
put_device(&cgdev->dev);
@@ -597,14 +597,14 @@
CLAW_DBF_TEXT(4, trace, "clawirq");
/* Bypass all 'unsolicited interrupts' */
- if (!cdev->dev.driver_data) {
+ privptr = dev_get_drvdata(&cdev->dev);
+ if (!privptr) {
dev_warn(&cdev->dev, "An uninitialized CLAW device received an"
" IRQ, c-%02x d-%02x\n",
irb->scsw.cmd.cstat, irb->scsw.cmd.dstat);
CLAW_DBF_TEXT(2, trace, "badirq");
return;
}
- privptr = (struct claw_privbk *)cdev->dev.driver_data;
/* Try to extract channel from driver data. */
if (privptr->channel[READ].cdev == cdev)
@@ -1986,9 +1986,9 @@
struct claw_privbk *privptr;
CLAW_DBF_TEXT(4, trace, "proberr");
- privptr = (struct claw_privbk *) cgdev->dev.driver_data;
+ privptr = dev_get_drvdata(&cgdev->dev);
if (privptr != NULL) {
- cgdev->dev.driver_data = NULL;
+ dev_set_drvdata(&cgdev->dev, NULL);
kfree(privptr->p_env);
kfree(privptr->p_mtc_envelope);
kfree(privptr);
@@ -2917,9 +2917,9 @@
dev_info(&cgdev->dev, "add for %s\n",
dev_name(&cgdev->cdev[READ]->dev));
CLAW_DBF_TEXT(2, setup, "new_dev");
- privptr = cgdev->dev.driver_data;
- cgdev->cdev[READ]->dev.driver_data = privptr;
- cgdev->cdev[WRITE]->dev.driver_data = privptr;
+ privptr = dev_get_drvdata(&cgdev->dev);
+ dev_set_drvdata(&cgdev->cdev[READ]->dev, privptr);
+ dev_set_drvdata(&cgdev->cdev[WRITE]->dev, privptr);
if (!privptr)
return -ENODEV;
p_env = privptr->p_env;
@@ -2956,9 +2956,9 @@
goto out;
}
dev->ml_priv = privptr;
- cgdev->dev.driver_data = privptr;
- cgdev->cdev[READ]->dev.driver_data = privptr;
- cgdev->cdev[WRITE]->dev.driver_data = privptr;
+ dev_set_drvdata(&cgdev->dev, privptr);
+ dev_set_drvdata(&cgdev->cdev[READ]->dev, privptr);
+ dev_set_drvdata(&cgdev->cdev[WRITE]->dev, privptr);
/* sysfs magic */
SET_NETDEV_DEV(dev, &cgdev->dev);
if (register_netdev(dev) != 0) {
@@ -3024,7 +3024,7 @@
int ret;
CLAW_DBF_TEXT_(2, setup, "%s", dev_name(&cgdev->dev));
- priv = cgdev->dev.driver_data;
+ priv = dev_get_drvdata(&cgdev->dev);
if (!priv)
return -ENODEV;
ndev = priv->channel[READ].ndev;
@@ -3054,7 +3054,7 @@
BUG_ON(!cgdev);
CLAW_DBF_TEXT_(2, setup, "%s", dev_name(&cgdev->dev));
- priv = cgdev->dev.driver_data;
+ priv = dev_get_drvdata(&cgdev->dev);
BUG_ON(!priv);
dev_info(&cgdev->dev, " will be removed.\n");
if (cgdev->state == CCWGROUP_ONLINE)
@@ -3069,9 +3069,9 @@
kfree(priv->channel[1].irb);
priv->channel[1].irb=NULL;
kfree(priv);
- cgdev->dev.driver_data=NULL;
- cgdev->cdev[READ]->dev.driver_data = NULL;
- cgdev->cdev[WRITE]->dev.driver_data = NULL;
+ dev_set_drvdata(&cgdev->dev, NULL);
+ dev_set_drvdata(&cgdev->cdev[READ]->dev, NULL);
+ dev_set_drvdata(&cgdev->cdev[WRITE]->dev, NULL);
put_device(&cgdev->dev);
return;
@@ -3087,7 +3087,7 @@
struct claw_privbk *priv;
struct claw_env * p_env;
- priv = dev->driver_data;
+ priv = dev_get_drvdata(dev);
if (!priv)
return -ENODEV;
p_env = priv->p_env;
@@ -3101,7 +3101,7 @@
struct claw_privbk *priv;
struct claw_env * p_env;
- priv = dev->driver_data;
+ priv = dev_get_drvdata(dev);
if (!priv)
return -ENODEV;
p_env = priv->p_env;
@@ -3125,7 +3125,7 @@
struct claw_privbk *priv;
struct claw_env * p_env;
- priv = dev->driver_data;
+ priv = dev_get_drvdata(dev);
if (!priv)
return -ENODEV;
p_env = priv->p_env;
@@ -3139,7 +3139,7 @@
struct claw_privbk *priv;
struct claw_env * p_env;
- priv = dev->driver_data;
+ priv = dev_get_drvdata(dev);
if (!priv)
return -ENODEV;
p_env = priv->p_env;
@@ -3163,7 +3163,7 @@
struct claw_privbk *priv;
struct claw_env * p_env;
- priv = dev->driver_data;
+ priv = dev_get_drvdata(dev);
if (!priv)
return -ENODEV;
p_env = priv->p_env;
@@ -3178,7 +3178,7 @@
struct claw_privbk *priv;
struct claw_env * p_env;
- priv = dev->driver_data;
+ priv = dev_get_drvdata(dev);
if (!priv)
return -ENODEV;
p_env = priv->p_env;
@@ -3212,7 +3212,7 @@
struct claw_privbk *priv;
struct claw_env * p_env;
- priv = dev->driver_data;
+ priv = dev_get_drvdata(dev);
if (!priv)
return -ENODEV;
p_env = priv->p_env;
@@ -3227,7 +3227,7 @@
struct claw_env * p_env;
int nnn,max;
- priv = dev->driver_data;
+ priv = dev_get_drvdata(dev);
if (!priv)
return -ENODEV;
p_env = priv->p_env;
@@ -3254,7 +3254,7 @@
struct claw_privbk *priv;
struct claw_env * p_env;
- priv = dev->driver_data;
+ priv = dev_get_drvdata(dev);
if (!priv)
return -ENODEV;
p_env = priv->p_env;
@@ -3269,7 +3269,7 @@
struct claw_env *p_env;
int nnn,max;
- priv = dev->driver_data;
+ priv = dev_get_drvdata(dev);
if (!priv)
return -ENODEV;
p_env = priv->p_env;
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 07a25c3..8c67590 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1936,7 +1936,7 @@
{
struct lcs_card *card;
- card = (struct lcs_card *)dev->driver_data;
+ card = dev_get_drvdata(dev);
if (!card)
return 0;
@@ -1953,7 +1953,7 @@
struct lcs_card *card;
int value;
- card = (struct lcs_card *)dev->driver_data;
+ card = dev_get_drvdata(dev);
if (!card)
return 0;
@@ -1987,7 +1987,7 @@
{
struct lcs_card *card;
- card = (struct lcs_card *)dev->driver_data;
+ card = dev_get_drvdata(dev);
return card ? sprintf(buf, "%u\n", card->lancmd_timeout) : 0;
}
@@ -1998,7 +1998,7 @@
struct lcs_card *card;
int value;
- card = (struct lcs_card *)dev->driver_data;
+ card = dev_get_drvdata(dev);
if (!card)
return 0;
@@ -2017,7 +2017,7 @@
lcs_dev_recover_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct lcs_card *card = dev->driver_data;
+ struct lcs_card *card = dev_get_drvdata(dev);
char *tmp;
int i;
@@ -2070,7 +2070,7 @@
put_device(&ccwgdev->dev);
return ret;
}
- ccwgdev->dev.driver_data = card;
+ dev_set_drvdata(&ccwgdev->dev, card);
ccwgdev->cdev[0]->handler = lcs_irq;
ccwgdev->cdev[1]->handler = lcs_irq;
card->gdev = ccwgdev;
@@ -2087,7 +2087,7 @@
struct lcs_card *card;
LCS_DBF_TEXT(2, setup, "regnetdv");
- card = (struct lcs_card *)ccwgdev->dev.driver_data;
+ card = dev_get_drvdata(&ccwgdev->dev);
if (card->dev->reg_state != NETREG_UNINITIALIZED)
return 0;
SET_NETDEV_DEV(card->dev, &ccwgdev->dev);
@@ -2120,7 +2120,7 @@
enum lcs_dev_states recover_state;
int rc;
- card = (struct lcs_card *)ccwgdev->dev.driver_data;
+ card = dev_get_drvdata(&ccwgdev->dev);
if (!card)
return -ENODEV;
@@ -2226,7 +2226,7 @@
int ret;
LCS_DBF_TEXT(3, setup, "shtdndev");
- card = (struct lcs_card *)ccwgdev->dev.driver_data;
+ card = dev_get_drvdata(&ccwgdev->dev);
if (!card)
return -ENODEV;
if (recovery_mode == 0) {
@@ -2293,7 +2293,7 @@
{
struct lcs_card *card;
- card = (struct lcs_card *)ccwgdev->dev.driver_data;
+ card = dev_get_drvdata(&ccwgdev->dev);
if (!card)
return;
diff --git a/drivers/s390/net/lcs.h b/drivers/s390/net/lcs.h
index d58fea5..6d66864 100644
--- a/drivers/s390/net/lcs.h
+++ b/drivers/s390/net/lcs.h
@@ -34,8 +34,8 @@
* sysfs related stuff
*/
#define CARD_FROM_DEV(cdev) \
- (struct lcs_card *) \
- ((struct ccwgroup_device *)cdev->dev.driver_data)->dev.driver_data;
+ (struct lcs_card *) dev_get_drvdata( \
+ &((struct ccwgroup_device *)dev_get_drvdata(&cdev->dev))->dev);
/**
* CCW commands used in this driver
*/
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index fdb02d0..52574ce 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -1452,7 +1452,7 @@
static ssize_t user_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%s\n", netiucv_printname(priv->conn->userid));
@@ -1461,7 +1461,7 @@
static ssize_t user_write(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
struct net_device *ndev = priv->conn->netdev;
char *p;
char *tmp;
@@ -1518,7 +1518,8 @@
static ssize_t buffer_show (struct device *dev, struct device_attribute *attr,
char *buf)
-{ struct netiucv_priv *priv = dev->driver_data;
+{
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%d\n", priv->conn->max_buffsize);
@@ -1527,7 +1528,7 @@
static ssize_t buffer_write (struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
struct net_device *ndev = priv->conn->netdev;
char *e;
int bs1;
@@ -1575,7 +1576,7 @@
static ssize_t dev_fsm_show (struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%s\n", fsm_getstate_str(priv->fsm));
@@ -1586,7 +1587,7 @@
static ssize_t conn_fsm_show (struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%s\n", fsm_getstate_str(priv->conn->fsm));
@@ -1597,7 +1598,7 @@
static ssize_t maxmulti_show (struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.maxmulti);
@@ -1607,7 +1608,7 @@
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.maxmulti = 0;
@@ -1619,7 +1620,7 @@
static ssize_t maxcq_show (struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.maxcqueue);
@@ -1628,7 +1629,7 @@
static ssize_t maxcq_write (struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.maxcqueue = 0;
@@ -1640,7 +1641,7 @@
static ssize_t sdoio_show (struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.doios_single);
@@ -1649,7 +1650,7 @@
static ssize_t sdoio_write (struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.doios_single = 0;
@@ -1661,7 +1662,7 @@
static ssize_t mdoio_show (struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.doios_multi);
@@ -1670,7 +1671,7 @@
static ssize_t mdoio_write (struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 5, __func__);
priv->conn->prof.doios_multi = 0;
@@ -1682,7 +1683,7 @@
static ssize_t txlen_show (struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.txlen);
@@ -1691,7 +1692,7 @@
static ssize_t txlen_write (struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.txlen = 0;
@@ -1703,7 +1704,7 @@
static ssize_t txtime_show (struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.tx_time);
@@ -1712,7 +1713,7 @@
static ssize_t txtime_write (struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.tx_time = 0;
@@ -1724,7 +1725,7 @@
static ssize_t txpend_show (struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.tx_pending);
@@ -1733,7 +1734,7 @@
static ssize_t txpend_write (struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.tx_pending = 0;
@@ -1745,7 +1746,7 @@
static ssize_t txmpnd_show (struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.tx_max_pending);
@@ -1754,7 +1755,7 @@
static ssize_t txmpnd_write (struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct netiucv_priv *priv = dev->driver_data;
+ struct netiucv_priv *priv = dev_get_drvdata(dev);
IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.tx_max_pending = 0;
@@ -1845,7 +1846,7 @@
if (ret)
goto out_unreg;
priv->dev = dev;
- dev->driver_data = priv;
+ dev_set_drvdata(dev, priv);
return 0;
out_unreg:
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index ed0e3e5..5381357 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -646,7 +646,7 @@
static __devexit int aha1740_remove (struct device *dev)
{
- struct Scsi_Host *shpnt = dev->driver_data;
+ struct Scsi_Host *shpnt = dev_get_drvdata(dev);
struct aha1740_hostdata *host = HOSTDATA (shpnt);
scsi_remove_host(shpnt);
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 11d2602..869a11b 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1877,7 +1877,7 @@
unsigned long wait_switch = 0;
int rc;
- vdev->dev.driver_data = NULL;
+ dev_set_drvdata(&vdev->dev, NULL);
host = scsi_host_alloc(&driver_template, sizeof(*hostdata));
if (!host) {
@@ -1949,7 +1949,7 @@
scsi_scan_host(host);
}
- vdev->dev.driver_data = hostdata;
+ dev_set_drvdata(&vdev->dev, hostdata);
return 0;
add_srp_port_failed:
@@ -1968,7 +1968,7 @@
static int ibmvscsi_remove(struct vio_dev *vdev)
{
- struct ibmvscsi_host_data *hostdata = vdev->dev.driver_data;
+ struct ibmvscsi_host_data *hostdata = dev_get_drvdata(&vdev->dev);
unmap_persist_bufs(hostdata);
release_event_pool(&hostdata->pool, hostdata);
ibmvscsi_ops->release_crq_queue(&hostdata->queue, hostdata,
diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c
index e2dd6a4..d5eaf97 100644
--- a/drivers/scsi/ibmvscsi/ibmvstgt.c
+++ b/drivers/scsi/ibmvscsi/ibmvstgt.c
@@ -892,7 +892,7 @@
static int ibmvstgt_remove(struct vio_dev *dev)
{
- struct srp_target *target = (struct srp_target *) dev->dev.driver_data;
+ struct srp_target *target = dev_get_drvdata(&dev->dev);
struct Scsi_Host *shost = target->shost;
struct vio_port *vport = target->ldata;
diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c
index 15e2d13..2742ae8 100644
--- a/drivers/scsi/libsrp.c
+++ b/drivers/scsi/libsrp.c
@@ -135,7 +135,7 @@
INIT_LIST_HEAD(&target->cmd_queue);
target->dev = dev;
- target->dev->driver_data = target;
+ dev_set_drvdata(target->dev, target);
target->srp_iu_size = iu_size;
target->rx_ring_size = nr;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 2b02b1f..8d0f0de 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -53,8 +53,7 @@
* debugfs interface
*
* To access this interface the user should:
- * # mkdir /debug
- * # mount -t debugfs none /debug
+ * # mount -t debugfs none /sys/kernel/debug
*
* The lpfc debugfs directory hierarchy is:
* lpfc/lpfcX/vportY
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 14f8fa9..54483cd 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -122,7 +122,7 @@
info->type = port_type;
info->line = ret;
- ofdev->dev.driver_data = info;
+ dev_set_drvdata(&ofdev->dev, info);
return 0;
out:
kfree(info);
@@ -135,7 +135,7 @@
*/
static int of_platform_serial_remove(struct of_device *ofdev)
{
- struct of_serial_info *info = ofdev->dev.driver_data;
+ struct of_serial_info *info = dev_get_drvdata(&ofdev->dev);
switch (info->type) {
#ifdef CONFIG_SERIAL_8250
case PORT_8250 ... PORT_MAX_8250:
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index f4573a9..a32ccb4 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -711,12 +711,12 @@
return 0;
}
- pinfo->gpios = kmalloc(ngpios * sizeof(pinfo->gpios), GFP_KERNEL);
+ pinfo->gpios = kmalloc(ngpios * sizeof(*pinfo->gpios), GFP_KERNEL);
if (!pinfo->gpios)
return -ENOMEM;
- memset(pinfo->gpios, -1, ngpios * sizeof(pinfo->gpios));
+ memset(pinfo->gpios, -1, ngpios * sizeof(*pinfo->gpios));
- pinfo->alow_flags = kzalloc(ngpios * sizeof(pinfo->alow_flags),
+ pinfo->alow_flags = kzalloc(ngpios * sizeof(*pinfo->alow_flags),
GFP_KERNEL);
if (!pinfo->alow_flags) {
ret = -ENOMEM;
diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c
index 9c62f78..39d0926 100644
--- a/drivers/staging/uc2322/aten2011.c
+++ b/drivers/staging/uc2322/aten2011.c
@@ -2336,7 +2336,7 @@
return 0;
}
-static void ATEN2011_shutdown(struct usb_serial *serial)
+static void ATEN2011_release(struct usb_serial *serial)
{
int i;
struct ATENINTL_port *ATEN2011_port;
@@ -2382,7 +2382,7 @@
.tiocmget = ATEN2011_tiocmget,
.tiocmset = ATEN2011_tiocmset,
.attach = ATEN2011_startup,
- .shutdown = ATEN2011_shutdown,
+ .release = ATEN2011_release,
.read_bulk_callback = ATEN2011_bulk_in_callback,
.read_int_callback = ATEN2011_interrupt_callback,
};
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 5e38ba1..0a69672 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -417,7 +417,7 @@
static ssize_t
name_show(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct thermal_hwmon_device *hwmon = dev->driver_data;
+ struct thermal_hwmon_device *hwmon = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", hwmon->type);
}
static DEVICE_ATTR(name, 0444, name_show, NULL);
@@ -488,7 +488,7 @@
result = PTR_ERR(hwmon->device);
goto free_mem;
}
- hwmon->device->driver_data = hwmon;
+ dev_set_drvdata(hwmon->device, hwmon);
result = device_create_file(hwmon->device, &dev_attr_name);
if (result)
goto unregister_hwmon_device;
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 5eee3f8..dcd49f1 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -64,6 +64,7 @@
config USB
tristate "Support for Host-side USB"
depends on USB_ARCH_HAS_HCD
+ select NLS # for UTF-8 strings
---help---
Universal Serial Bus (USB) is a specification for a serial bus
subsystem which offers higher speeds and more features than the
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 0a3dc5e..19cb7d5 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -14,6 +14,7 @@
obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
obj-$(CONFIG_USB_FHCI_HCD) += host/
+obj-$(CONFIG_USB_XHCI_HCD) += host/
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 9cf9ff6..d171b56 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -306,6 +306,7 @@
#define FW_GET_BYTE(p) *((__u8 *) (p))
#define FW_DIR "ueagle-atm/"
+#define UEA_FW_NAME_MAX 30
#define NB_MODEM 4
#define BULK_TIMEOUT 300
@@ -1564,9 +1565,9 @@
file = cmv_file[sc->modem_index];
strcpy(cmv_name, FW_DIR);
- strlcat(cmv_name, file, FIRMWARE_NAME_MAX);
+ strlcat(cmv_name, file, UEA_FW_NAME_MAX);
if (ver == 2)
- strlcat(cmv_name, ".v2", FIRMWARE_NAME_MAX);
+ strlcat(cmv_name, ".v2", UEA_FW_NAME_MAX);
}
static int request_cmvs_old(struct uea_softc *sc,
@@ -1574,7 +1575,7 @@
{
int ret, size;
u8 *data;
- char cmv_name[FIRMWARE_NAME_MAX]; /* 30 bytes stack variable */
+ char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */
cmvs_file_name(sc, cmv_name, 1);
ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
@@ -1608,7 +1609,7 @@
int ret, size;
u32 crc;
u8 *data;
- char cmv_name[FIRMWARE_NAME_MAX]; /* 30 bytes stack variable */
+ char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */
cmvs_file_name(sc, cmv_name, 2);
ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index ddeb691..38bfdb0 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -937,9 +937,9 @@
int buflen = intf->altsetting->extralen;
struct usb_interface *control_interface;
struct usb_interface *data_interface;
- struct usb_endpoint_descriptor *epctrl;
- struct usb_endpoint_descriptor *epread;
- struct usb_endpoint_descriptor *epwrite;
+ struct usb_endpoint_descriptor *epctrl = NULL;
+ struct usb_endpoint_descriptor *epread = NULL;
+ struct usb_endpoint_descriptor *epwrite = NULL;
struct usb_device *usb_dev = interface_to_usbdev(intf);
struct acm *acm;
int minor;
@@ -952,6 +952,7 @@
unsigned long quirks;
int num_rx_buf;
int i;
+ int combined_interfaces = 0;
/* normal quirks */
quirks = (unsigned long)id->driver_info;
@@ -1033,9 +1034,15 @@
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
control_interface = intf;
} else {
- dev_dbg(&intf->dev,
- "No union descriptor, giving up\n");
- return -ENODEV;
+ if (intf->cur_altsetting->desc.bNumEndpoints != 3) {
+ dev_dbg(&intf->dev,"No union descriptor, giving up\n");
+ return -ENODEV;
+ } else {
+ dev_warn(&intf->dev,"No union descriptor, testing for castrated device\n");
+ combined_interfaces = 1;
+ control_interface = data_interface = intf;
+ goto look_for_collapsed_interface;
+ }
}
} else {
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
@@ -1049,6 +1056,36 @@
if (data_interface_num != call_interface_num)
dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n");
+ if (control_interface == data_interface) {
+ /* some broken devices designed for windows work this way */
+ dev_warn(&intf->dev,"Control and data interfaces are not separated!\n");
+ combined_interfaces = 1;
+ /* a popular other OS doesn't use it */
+ quirks |= NO_CAP_LINE;
+ if (data_interface->cur_altsetting->desc.bNumEndpoints != 3) {
+ dev_err(&intf->dev, "This needs exactly 3 endpoints\n");
+ return -EINVAL;
+ }
+look_for_collapsed_interface:
+ for (i = 0; i < 3; i++) {
+ struct usb_endpoint_descriptor *ep;
+ ep = &data_interface->cur_altsetting->endpoint[i].desc;
+
+ if (usb_endpoint_is_int_in(ep))
+ epctrl = ep;
+ else if (usb_endpoint_is_bulk_out(ep))
+ epwrite = ep;
+ else if (usb_endpoint_is_bulk_in(ep))
+ epread = ep;
+ else
+ return -EINVAL;
+ }
+ if (!epctrl || !epread || !epwrite)
+ return -ENODEV;
+ else
+ goto made_compressed_probe;
+ }
+
skip_normal_probe:
/*workaround for switched interfaces */
@@ -1068,10 +1105,11 @@
}
/* Accept probe requests only for the control interface */
- if (intf != control_interface)
+ if (!combined_interfaces && intf != control_interface)
return -ENODEV;
- if (usb_interface_claimed(data_interface)) { /* valid in this context */
+ if (!combined_interfaces && usb_interface_claimed(data_interface)) {
+ /* valid in this context */
dev_dbg(&intf->dev, "The data interface isn't available\n");
return -EBUSY;
}
@@ -1095,6 +1133,7 @@
epread = epwrite;
epwrite = t;
}
+made_compressed_probe:
dbg("interfaces are valid");
for (minor = 0; minor < ACM_TTY_MINORS && acm_table[minor]; minor++);
@@ -1112,12 +1151,15 @@
ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
readsize = le16_to_cpu(epread->wMaxPacketSize) *
(quirks == SINGLE_RX_URB ? 1 : 2);
+ acm->combined_interfaces = combined_interfaces;
acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20;
acm->control = control_interface;
acm->data = data_interface;
acm->minor = minor;
acm->dev = usb_dev;
acm->ctrl_caps = ac_management_function;
+ if (quirks & NO_CAP_LINE)
+ acm->ctrl_caps &= ~USB_CDC_CAP_LINE;
acm->ctrlsize = ctrlsize;
acm->readsize = readsize;
acm->rx_buflimit = num_rx_buf;
@@ -1223,9 +1265,10 @@
skip_countries:
usb_fill_int_urb(acm->ctrlurb, usb_dev,
- usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
- acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm,
- epctrl->bInterval);
+ usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
+ acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm,
+ /* works around buggy devices */
+ epctrl->bInterval ? epctrl->bInterval : 0xff);
acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
acm->ctrlurb->transfer_dma = acm->ctrl_dma;
@@ -1312,7 +1355,8 @@
acm->ctrl_dma);
acm_read_buffers_free(acm);
- usb_driver_release_interface(&acm_driver, intf == acm->control ?
+ if (!acm->combined_interfaces)
+ usb_driver_release_interface(&acm_driver, intf == acm->control ?
acm->data : acm->control);
if (acm->port.count == 0) {
@@ -1451,6 +1495,9 @@
Maybe we should define a new
quirk for this. */
},
+ { USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
+ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+ },
/* control interfaces with various AT-command sets */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 4c38564..1602324 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -125,6 +125,7 @@
unsigned char clocal; /* termios CLOCAL */
unsigned int ctrl_caps; /* control capabilities from the class specific header */
unsigned int susp_count; /* number of suspended interfaces */
+ int combined_interfaces:1; /* control and data collapsed */
struct acm_wb *delayed_wb; /* write queued for a device about to be woken */
};
@@ -133,3 +134,4 @@
/* constants describing various quirks and errors */
#define NO_UNION_NORMAL 1
#define SINGLE_RX_URB 2
+#define NO_CAP_LINE 4
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index d2747a4..26c09f0 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -1057,8 +1057,14 @@
.release = usblp_release,
};
+static char *usblp_nodename(struct device *dev)
+{
+ return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
static struct usb_class_driver usblp_class = {
.name = "lp%d",
+ .nodename = usblp_nodename,
.fops = &usblp_fops,
.minor_base = USBLP_MINOR_BASE,
};
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index c40a9b2..3703789 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -927,21 +927,27 @@
switch (cmd) {
case USBTMC_IOCTL_CLEAR_OUT_HALT:
retval = usbtmc_ioctl_clear_out_halt(data);
+ break;
case USBTMC_IOCTL_CLEAR_IN_HALT:
retval = usbtmc_ioctl_clear_in_halt(data);
+ break;
case USBTMC_IOCTL_INDICATOR_PULSE:
retval = usbtmc_ioctl_indicator_pulse(data);
+ break;
case USBTMC_IOCTL_CLEAR:
retval = usbtmc_ioctl_clear(data);
+ break;
case USBTMC_IOCTL_ABORT_BULK_OUT:
retval = usbtmc_ioctl_abort_bulk_out(data);
+ break;
case USBTMC_IOCTL_ABORT_BULK_IN:
retval = usbtmc_ioctl_abort_bulk_in(data);
+ break;
}
mutex_unlock(&data->io_mutex);
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index e1759d1..69280c3 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -28,7 +28,7 @@
depends on USB
config USB_DEVICEFS
- bool "USB device filesystem"
+ bool "USB device filesystem (DEPRECATED)" if EMBEDDED
depends on USB
---help---
If you say Y here (and to "/proc file system support" in the "File
@@ -46,11 +46,15 @@
For the format of the various /proc/bus/usb/ files, please read
<file:Documentation/usb/proc_usb_info.txt>.
- Usbfs files can't handle Access Control Lists (ACL), which are the
- default way to grant access to USB devices for untrusted users of a
- desktop system. The usbfs functionality is replaced by real
- device-nodes managed by udev. These nodes live in /dev/bus/usb and
- are used by libusb.
+ Modern Linux systems do not use this.
+
+ Usbfs entries are files and not character devices; usbfs can't
+ handle Access Control Lists (ACL) which are the default way to
+ grant access to USB devices for untrusted users of a desktop
+ system.
+
+ The usbfs functionality is replaced by real device-nodes managed by
+ udev. These nodes lived in /dev/bus/usb and are used by libusb.
config USB_DEVICE_CLASS
bool "USB device class-devices (DEPRECATED)"
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
index b607870..ec16e60 100644
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@@ -4,14 +4,14 @@
usbcore-objs := usb.o hub.o hcd.o urb.o message.o driver.o \
config.o file.o buffer.o sysfs.o endpoint.o \
- devio.o notify.o generic.o quirks.o
+ devio.o notify.o generic.o quirks.o devices.o
ifeq ($(CONFIG_PCI),y)
usbcore-objs += hcd-pci.o
endif
ifeq ($(CONFIG_USB_DEVICEFS),y)
- usbcore-objs += inode.o devices.o
+ usbcore-objs += inode.o
endif
obj-$(CONFIG_USB) += usbcore.o
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 568244c..24dfb33 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -19,6 +19,32 @@
return (n == 1 ? "" : "s");
}
+/* FIXME: this is a kludge */
+static int find_next_descriptor_more(unsigned char *buffer, int size,
+ int dt1, int dt2, int dt3, int *num_skipped)
+{
+ struct usb_descriptor_header *h;
+ int n = 0;
+ unsigned char *buffer0 = buffer;
+
+ /* Find the next descriptor of type dt1 or dt2 or dt3 */
+ while (size > 0) {
+ h = (struct usb_descriptor_header *) buffer;
+ if (h->bDescriptorType == dt1 || h->bDescriptorType == dt2 ||
+ h->bDescriptorType == dt3)
+ break;
+ buffer += h->bLength;
+ size -= h->bLength;
+ ++n;
+ }
+
+ /* Store the number of descriptors skipped and return the
+ * number of bytes skipped */
+ if (num_skipped)
+ *num_skipped = n;
+ return buffer - buffer0;
+}
+
static int find_next_descriptor(unsigned char *buffer, int size,
int dt1, int dt2, int *num_skipped)
{
@@ -43,6 +69,129 @@
return buffer - buffer0;
}
+static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
+ int inum, int asnum, struct usb_host_endpoint *ep,
+ int num_ep, unsigned char *buffer, int size)
+{
+ unsigned char *buffer_start = buffer;
+ struct usb_ss_ep_comp_descriptor *desc;
+ int retval;
+ int num_skipped;
+ int max_tx;
+ int i;
+
+ /* Allocate space for the SS endpoint companion descriptor */
+ ep->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
+ GFP_KERNEL);
+ if (!ep->ss_ep_comp)
+ return -ENOMEM;
+ desc = (struct usb_ss_ep_comp_descriptor *) buffer;
+ if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) {
+ dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
+ " interface %d altsetting %d ep %d: "
+ "using minimum values\n",
+ cfgno, inum, asnum, ep->desc.bEndpointAddress);
+ ep->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
+ ep->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
+ ep->ss_ep_comp->desc.bMaxBurst = 0;
+ /*
+ * Leave bmAttributes as zero, which will mean no streams for
+ * bulk, and isoc won't support multiple bursts of packets.
+ * With bursts of only one packet, and a Mult of 1, the max
+ * amount of data moved per endpoint service interval is one
+ * packet.
+ */
+ if (usb_endpoint_xfer_isoc(&ep->desc) ||
+ usb_endpoint_xfer_int(&ep->desc))
+ ep->ss_ep_comp->desc.wBytesPerInterval =
+ ep->desc.wMaxPacketSize;
+ /*
+ * The next descriptor is for an Endpoint or Interface,
+ * no extra descriptors to copy into the companion structure,
+ * and we didn't eat up any of the buffer.
+ */
+ retval = 0;
+ goto valid;
+ }
+ memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE);
+ desc = &ep->ss_ep_comp->desc;
+ buffer += desc->bLength;
+ size -= desc->bLength;
+
+ /* Eat up the other descriptors we don't care about */
+ ep->ss_ep_comp->extra = buffer;
+ i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
+ USB_DT_INTERFACE, &num_skipped);
+ ep->ss_ep_comp->extralen = i;
+ buffer += i;
+ size -= i;
+ retval = buffer - buffer_start + i;
+ if (num_skipped > 0)
+ dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
+ num_skipped, plural(num_skipped),
+ "SuperSpeed endpoint companion");
+
+ /* Check the various values */
+ if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) {
+ dev_warn(ddev, "Control endpoint with bMaxBurst = %d in "
+ "config %d interface %d altsetting %d ep %d: "
+ "setting to zero\n", desc->bMaxBurst,
+ cfgno, inum, asnum, ep->desc.bEndpointAddress);
+ desc->bMaxBurst = 0;
+ }
+ if (desc->bMaxBurst > 15) {
+ dev_warn(ddev, "Endpoint with bMaxBurst = %d in "
+ "config %d interface %d altsetting %d ep %d: "
+ "setting to 15\n", desc->bMaxBurst,
+ cfgno, inum, asnum, ep->desc.bEndpointAddress);
+ desc->bMaxBurst = 15;
+ }
+ if ((usb_endpoint_xfer_control(&ep->desc) || usb_endpoint_xfer_int(&ep->desc))
+ && desc->bmAttributes != 0) {
+ dev_warn(ddev, "%s endpoint with bmAttributes = %d in "
+ "config %d interface %d altsetting %d ep %d: "
+ "setting to zero\n",
+ usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk",
+ desc->bmAttributes,
+ cfgno, inum, asnum, ep->desc.bEndpointAddress);
+ desc->bmAttributes = 0;
+ }
+ if (usb_endpoint_xfer_bulk(&ep->desc) && desc->bmAttributes > 16) {
+ dev_warn(ddev, "Bulk endpoint with more than 65536 streams in "
+ "config %d interface %d altsetting %d ep %d: "
+ "setting to max\n",
+ cfgno, inum, asnum, ep->desc.bEndpointAddress);
+ desc->bmAttributes = 16;
+ }
+ if (usb_endpoint_xfer_isoc(&ep->desc) && desc->bmAttributes > 2) {
+ dev_warn(ddev, "Isoc endpoint has Mult of %d in "
+ "config %d interface %d altsetting %d ep %d: "
+ "setting to 3\n", desc->bmAttributes + 1,
+ cfgno, inum, asnum, ep->desc.bEndpointAddress);
+ desc->bmAttributes = 2;
+ }
+ if (usb_endpoint_xfer_isoc(&ep->desc)) {
+ max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1) *
+ (desc->bmAttributes + 1);
+ } else if (usb_endpoint_xfer_int(&ep->desc)) {
+ max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1);
+ } else {
+ goto valid;
+ }
+ if (desc->wBytesPerInterval > max_tx) {
+ dev_warn(ddev, "%s endpoint with wBytesPerInterval of %d in "
+ "config %d interface %d altsetting %d ep %d: "
+ "setting to %d\n",
+ usb_endpoint_xfer_isoc(&ep->desc) ? "Isoc" : "Int",
+ desc->wBytesPerInterval,
+ cfgno, inum, asnum, ep->desc.bEndpointAddress,
+ max_tx);
+ desc->wBytesPerInterval = max_tx;
+ }
+valid:
+ return retval;
+}
+
static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
int asnum, struct usb_host_interface *ifp, int num_ep,
unsigned char *buffer, int size)
@@ -50,7 +199,7 @@
unsigned char *buffer0 = buffer;
struct usb_endpoint_descriptor *d;
struct usb_host_endpoint *endpoint;
- int n, i, j;
+ int n, i, j, retval;
d = (struct usb_endpoint_descriptor *) buffer;
buffer += d->bLength;
@@ -92,6 +241,7 @@
if (usb_endpoint_xfer_int(d)) {
i = 1;
switch (to_usb_device(ddev)->speed) {
+ case USB_SPEED_SUPER:
case USB_SPEED_HIGH:
/* Many device manufacturers are using full-speed
* bInterval values in high-speed interrupt endpoint
@@ -161,17 +311,39 @@
cfgno, inum, asnum, d->bEndpointAddress,
maxp);
}
+ /* Allocate room for and parse any SS endpoint companion descriptors */
+ if (to_usb_device(ddev)->speed == USB_SPEED_SUPER) {
+ endpoint->extra = buffer;
+ i = find_next_descriptor_more(buffer, size, USB_DT_SS_ENDPOINT_COMP,
+ USB_DT_ENDPOINT, USB_DT_INTERFACE, &n);
+ endpoint->extralen = i;
+ buffer += i;
+ size -= i;
- /* Skip over any Class Specific or Vendor Specific descriptors;
- * find the next endpoint or interface descriptor */
- endpoint->extra = buffer;
- i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
- USB_DT_INTERFACE, &n);
- endpoint->extralen = i;
+ if (size > 0) {
+ retval = usb_parse_ss_endpoint_companion(ddev, cfgno,
+ inum, asnum, endpoint, num_ep, buffer,
+ size);
+ if (retval >= 0) {
+ buffer += retval;
+ retval = buffer - buffer0;
+ }
+ } else {
+ retval = buffer - buffer0;
+ }
+ } else {
+ /* Skip over any Class Specific or Vendor Specific descriptors;
+ * find the next endpoint or interface descriptor */
+ endpoint->extra = buffer;
+ i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
+ USB_DT_INTERFACE, &n);
+ endpoint->extralen = i;
+ retval = buffer - buffer0 + i;
+ }
if (n > 0)
dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
n, plural(n), "endpoint");
- return buffer - buffer0 + i;
+ return retval;
skip_to_next_endpoint_or_interface_descriptor:
i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
@@ -452,6 +624,8 @@
kref_init(&intfc->ref);
}
+ /* FIXME: parse the BOS descriptor */
+
/* Skip over any Class Specific or Vendor Specific descriptors;
* find the first interface descriptor */
config->extra = buffer;
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index d0a21a5..69e5773 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -154,16 +154,11 @@
static int usb_probe_device(struct device *dev)
{
struct usb_device_driver *udriver = to_usb_device_driver(dev->driver);
- struct usb_device *udev;
+ struct usb_device *udev = to_usb_device(dev);
int error = -ENODEV;
dev_dbg(dev, "%s\n", __func__);
- if (!is_usb_device(dev)) /* Sanity check */
- return error;
-
- udev = to_usb_device(dev);
-
/* TODO: Add real matching code */
/* The device should always appear to be in use
@@ -203,18 +198,13 @@
static int usb_probe_interface(struct device *dev)
{
struct usb_driver *driver = to_usb_driver(dev->driver);
- struct usb_interface *intf;
- struct usb_device *udev;
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct usb_device *udev = interface_to_usbdev(intf);
const struct usb_device_id *id;
int error = -ENODEV;
dev_dbg(dev, "%s\n", __func__);
- if (is_usb_device(dev)) /* Sanity check */
- return error;
-
- intf = to_usb_interface(dev);
- udev = interface_to_usbdev(intf);
intf->needs_binding = 0;
if (udev->authorized == 0) {
@@ -385,7 +375,6 @@
struct usb_interface *iface)
{
struct device *dev = &iface->dev;
- struct usb_device *udev = interface_to_usbdev(iface);
/* this should never happen, don't release something that's not ours */
if (!dev->driver || dev->driver != &driver->drvwrap.driver)
@@ -394,23 +383,19 @@
/* don't release from within disconnect() */
if (iface->condition != USB_INTERFACE_BOUND)
return;
+ iface->condition = USB_INTERFACE_UNBINDING;
- /* don't release if the interface hasn't been added yet */
+ /* Release via the driver core only if the interface
+ * has already been registered
+ */
if (device_is_registered(dev)) {
- iface->condition = USB_INTERFACE_UNBINDING;
device_release_driver(dev);
} else {
- iface->condition = USB_INTERFACE_UNBOUND;
- usb_cancel_queued_reset(iface);
+ down(&dev->sem);
+ usb_unbind_interface(dev);
+ dev->driver = NULL;
+ up(&dev->sem);
}
- dev->driver = NULL;
- usb_set_intfdata(iface, NULL);
-
- usb_pm_lock(udev);
- iface->condition = USB_INTERFACE_UNBOUND;
- mark_quiesced(iface);
- iface->needs_remote_wakeup = 0;
- usb_pm_unlock(udev);
}
EXPORT_SYMBOL_GPL(usb_driver_release_interface);
@@ -598,7 +583,7 @@
/* TODO: Add real matching code */
return 1;
- } else {
+ } else if (is_usb_interface(dev)) {
struct usb_interface *intf;
struct usb_driver *usb_drv;
const struct usb_device_id *id;
@@ -630,11 +615,14 @@
/* driver is often null here; dev_dbg() would oops */
pr_debug("usb %s: uevent\n", dev_name(dev));
- if (is_usb_device(dev))
+ if (is_usb_device(dev)) {
usb_dev = to_usb_device(dev);
- else {
+ } else if (is_usb_interface(dev)) {
struct usb_interface *intf = to_usb_interface(dev);
+
usb_dev = interface_to_usbdev(intf);
+ } else {
+ return 0;
}
if (usb_dev->devnum < 0) {
@@ -1762,6 +1750,7 @@
int usb_resume(struct device *dev, pm_message_t msg)
{
struct usb_device *udev;
+ int status;
udev = to_usb_device(dev);
@@ -1771,7 +1760,14 @@
*/
if (udev->skip_sys_resume)
return 0;
- return usb_external_resume_device(udev, msg);
+ status = usb_external_resume_device(udev, msg);
+
+ /* Avoid PM error messages for devices disconnected while suspended
+ * as we'll display regular disconnect messages just a bit later.
+ */
+ if (status == -ENODEV)
+ return 0;
+ return status;
}
#endif /* CONFIG_PM */
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 40dee2a..bc39fc4 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -15,19 +15,18 @@
#include <linux/usb.h>
#include "usb.h"
-#define MAX_ENDPOINT_MINORS (64*128*32)
-static int usb_endpoint_major;
-static DEFINE_IDR(endpoint_idr);
-
struct ep_device {
struct usb_endpoint_descriptor *desc;
struct usb_device *udev;
struct device dev;
- int minor;
};
#define to_ep_device(_dev) \
container_of(_dev, struct ep_device, dev)
+struct device_type usb_ep_device_type = {
+ .name = "usb_endpoint",
+};
+
struct ep_attribute {
struct attribute attr;
ssize_t (*show)(struct usb_device *,
@@ -160,118 +159,10 @@
NULL
};
-static int usb_endpoint_major_init(void)
-{
- dev_t dev;
- int error;
-
- error = alloc_chrdev_region(&dev, 0, MAX_ENDPOINT_MINORS,
- "usb_endpoint");
- if (error) {
- printk(KERN_ERR "Unable to get a dynamic major for "
- "usb endpoints.\n");
- return error;
- }
- usb_endpoint_major = MAJOR(dev);
-
- return error;
-}
-
-static void usb_endpoint_major_cleanup(void)
-{
- unregister_chrdev_region(MKDEV(usb_endpoint_major, 0),
- MAX_ENDPOINT_MINORS);
-}
-
-static int endpoint_get_minor(struct ep_device *ep_dev)
-{
- static DEFINE_MUTEX(minor_lock);
- int retval = -ENOMEM;
- int id;
-
- mutex_lock(&minor_lock);
- if (idr_pre_get(&endpoint_idr, GFP_KERNEL) == 0)
- goto exit;
-
- retval = idr_get_new(&endpoint_idr, ep_dev, &id);
- if (retval < 0) {
- if (retval == -EAGAIN)
- retval = -ENOMEM;
- goto exit;
- }
- ep_dev->minor = id & MAX_ID_MASK;
-exit:
- mutex_unlock(&minor_lock);
- return retval;
-}
-
-static void endpoint_free_minor(struct ep_device *ep_dev)
-{
- idr_remove(&endpoint_idr, ep_dev->minor);
-}
-
-static struct endpoint_class {
- struct kref kref;
- struct class *class;
-} *ep_class;
-
-static int init_endpoint_class(void)
-{
- int result = 0;
-
- if (ep_class != NULL) {
- kref_get(&ep_class->kref);
- goto exit;
- }
-
- ep_class = kmalloc(sizeof(*ep_class), GFP_KERNEL);
- if (!ep_class) {
- result = -ENOMEM;
- goto exit;
- }
-
- kref_init(&ep_class->kref);
- ep_class->class = class_create(THIS_MODULE, "usb_endpoint");
- if (IS_ERR(ep_class->class)) {
- result = PTR_ERR(ep_class->class);
- goto class_create_error;
- }
-
- result = usb_endpoint_major_init();
- if (result)
- goto endpoint_major_error;
-
- goto exit;
-
-endpoint_major_error:
- class_destroy(ep_class->class);
-class_create_error:
- kfree(ep_class);
- ep_class = NULL;
-exit:
- return result;
-}
-
-static void release_endpoint_class(struct kref *kref)
-{
- /* Ok, we cheat as we know we only have one ep_class */
- class_destroy(ep_class->class);
- kfree(ep_class);
- ep_class = NULL;
- usb_endpoint_major_cleanup();
-}
-
-static void destroy_endpoint_class(void)
-{
- if (ep_class)
- kref_put(&ep_class->kref, release_endpoint_class);
-}
-
static void ep_device_release(struct device *dev)
{
struct ep_device *ep_dev = to_ep_device(dev);
- endpoint_free_minor(ep_dev);
kfree(ep_dev);
}
@@ -279,62 +170,32 @@
struct usb_host_endpoint *endpoint,
struct usb_device *udev)
{
- char name[8];
struct ep_device *ep_dev;
int retval;
- retval = init_endpoint_class();
- if (retval)
- goto exit;
-
ep_dev = kzalloc(sizeof(*ep_dev), GFP_KERNEL);
if (!ep_dev) {
retval = -ENOMEM;
- goto error_alloc;
- }
-
- retval = endpoint_get_minor(ep_dev);
- if (retval) {
- dev_err(parent, "can not allocate minor number for %s\n",
- dev_name(&ep_dev->dev));
- goto error_register;
+ goto exit;
}
ep_dev->desc = &endpoint->desc;
ep_dev->udev = udev;
ep_dev->dev.groups = ep_dev_groups;
- ep_dev->dev.devt = MKDEV(usb_endpoint_major, ep_dev->minor);
- ep_dev->dev.class = ep_class->class;
+ ep_dev->dev.type = &usb_ep_device_type;
ep_dev->dev.parent = parent;
ep_dev->dev.release = ep_device_release;
- dev_set_name(&ep_dev->dev, "usbdev%d.%d_ep%02x",
- udev->bus->busnum, udev->devnum,
- endpoint->desc.bEndpointAddress);
+ dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress);
retval = device_register(&ep_dev->dev);
if (retval)
- goto error_chrdev;
+ goto error_register;
- /* create the symlink to the old-style "ep_XX" directory */
- sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
- retval = sysfs_create_link(&parent->kobj, &ep_dev->dev.kobj, name);
- if (retval)
- goto error_link;
endpoint->ep_dev = ep_dev;
return retval;
-error_link:
- device_unregister(&ep_dev->dev);
- destroy_endpoint_class();
- return retval;
-
-error_chrdev:
- endpoint_free_minor(ep_dev);
-
error_register:
kfree(ep_dev);
-error_alloc:
- destroy_endpoint_class();
exit:
return retval;
}
@@ -344,12 +205,7 @@
struct ep_device *ep_dev = endpoint->ep_dev;
if (ep_dev) {
- char name[8];
-
- sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
- sysfs_remove_link(&ep_dev->dev.parent->kobj, name);
device_unregister(&ep_dev->dev);
endpoint->ep_dev = NULL;
- destroy_endpoint_class();
}
}
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 997e659..5cef889 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -67,6 +67,16 @@
struct class *class;
} *usb_class;
+static char *usb_nodename(struct device *dev)
+{
+ struct usb_class_driver *drv;
+
+ drv = dev_get_drvdata(dev);
+ if (!drv || !drv->nodename)
+ return NULL;
+ return drv->nodename(dev);
+}
+
static int init_usb_class(void)
{
int result = 0;
@@ -90,6 +100,7 @@
kfree(usb_class);
usb_class = NULL;
}
+ usb_class->class->nodename = usb_nodename;
exit:
return result;
@@ -198,7 +209,7 @@
else
temp = name;
intf->usb_dev = device_create(usb_class->class, &intf->dev,
- MKDEV(USB_MAJOR, minor), NULL,
+ MKDEV(USB_MAJOR, minor), class_driver,
"%s", temp);
if (IS_ERR(intf->usb_dev)) {
down_write(&minor_rwsem);
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index a4301dc..91f2885 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -185,180 +185,6 @@
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
-
-#ifdef CONFIG_PM
-
-/**
- * usb_hcd_pci_suspend - power management suspend of a PCI-based HCD
- * @dev: USB Host Controller being suspended
- * @message: Power Management message describing this state transition
- *
- * Store this function in the HCD's struct pci_driver as .suspend.
- */
-int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
-{
- struct usb_hcd *hcd = pci_get_drvdata(dev);
- int retval = 0;
- int wake, w;
- int has_pci_pm;
-
- /* Root hub suspend should have stopped all downstream traffic,
- * and all bus master traffic. And done so for both the interface
- * and the stub usb_device (which we check here). But maybe it
- * didn't; writing sysfs power/state files ignores such rules...
- *
- * We must ignore the FREEZE vs SUSPEND distinction here, because
- * otherwise the swsusp will save (and restore) garbage state.
- */
- if (!(hcd->state == HC_STATE_SUSPENDED ||
- hcd->state == HC_STATE_HALT)) {
- dev_warn(&dev->dev, "Root hub is not suspended\n");
- retval = -EBUSY;
- goto done;
- }
-
- /* We might already be suspended (runtime PM -- not yet written) */
- if (dev->current_state != PCI_D0)
- goto done;
-
- if (hcd->driver->pci_suspend) {
- retval = hcd->driver->pci_suspend(hcd, message);
- suspend_report_result(hcd->driver->pci_suspend, retval);
- if (retval)
- goto done;
- }
-
- synchronize_irq(dev->irq);
-
- /* Downstream ports from this root hub should already be quiesced, so
- * there will be no DMA activity. Now we can shut down the upstream
- * link (except maybe for PME# resume signaling) and enter some PCI
- * low power state, if the hardware allows.
- */
- pci_disable_device(dev);
-
- pci_save_state(dev);
-
- /* Don't fail on error to enable wakeup. We rely on pci code
- * to reject requests the hardware can't implement, rather
- * than coding the same thing.
- */
- wake = (hcd->state == HC_STATE_SUSPENDED &&
- device_may_wakeup(&dev->dev));
- w = pci_wake_from_d3(dev, wake);
- if (w < 0)
- wake = w;
- dev_dbg(&dev->dev, "wakeup: %d\n", wake);
-
- /* Don't change state if we don't need to */
- if (message.event == PM_EVENT_FREEZE ||
- message.event == PM_EVENT_PRETHAW) {
- dev_dbg(&dev->dev, "--> no state change\n");
- goto done;
- }
-
- has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- if (!has_pci_pm) {
- dev_dbg(&dev->dev, "--> PCI D0 legacy\n");
- } else {
-
- /* NOTE: dev->current_state becomes nonzero only here, and
- * only for devices that support PCI PM. Also, exiting
- * PCI_D3 (but not PCI_D1 or PCI_D2) is allowed to reset
- * some device state (e.g. as part of clock reinit).
- */
- retval = pci_set_power_state(dev, PCI_D3hot);
- suspend_report_result(pci_set_power_state, retval);
- if (retval == 0) {
- dev_dbg(&dev->dev, "--> PCI D3\n");
- } else {
- dev_dbg(&dev->dev, "PCI D3 suspend fail, %d\n",
- retval);
- pci_restore_state(dev);
- }
- }
-
-#ifdef CONFIG_PPC_PMAC
- if (retval == 0) {
- /* Disable ASIC clocks for USB */
- if (machine_is(powermac)) {
- struct device_node *of_node;
-
- of_node = pci_device_to_OF_node(dev);
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE,
- of_node, 0, 0);
- }
- }
-#endif
-
- done:
- return retval;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
-
-/**
- * usb_hcd_pci_resume - power management resume of a PCI-based HCD
- * @dev: USB Host Controller being resumed
- *
- * Store this function in the HCD's struct pci_driver as .resume.
- */
-int usb_hcd_pci_resume(struct pci_dev *dev)
-{
- struct usb_hcd *hcd;
- int retval;
-
-#ifdef CONFIG_PPC_PMAC
- /* Reenable ASIC clocks for USB */
- if (machine_is(powermac)) {
- struct device_node *of_node;
-
- of_node = pci_device_to_OF_node(dev);
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE,
- of_node, 0, 1);
- }
-#endif
-
- pci_restore_state(dev);
-
- hcd = pci_get_drvdata(dev);
- if (hcd->state != HC_STATE_SUSPENDED) {
- dev_dbg(hcd->self.controller,
- "can't resume, not suspended!\n");
- return 0;
- }
-
- pci_enable_wake(dev, PCI_D0, false);
-
- retval = pci_enable_device(dev);
- if (retval < 0) {
- dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
- retval);
- return retval;
- }
-
- pci_set_master(dev);
-
- /* yes, ignore this result too... */
- (void) pci_wake_from_d3(dev, 0);
-
- clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
-
- if (hcd->driver->pci_resume) {
- retval = hcd->driver->pci_resume(hcd);
- if (retval) {
- dev_err(hcd->self.controller,
- "PCI post-resume error %d!\n", retval);
- usb_hc_died(hcd);
- }
- }
- return retval;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_resume);
-
-#endif /* CONFIG_PM */
-
/**
* usb_hcd_pci_shutdown - shutdown host controller
* @dev: USB Host Controller being shutdown
@@ -376,3 +202,181 @@
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
+#ifdef CONFIG_PM_SLEEP
+
+static int check_root_hub_suspended(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+
+ if (!(hcd->state == HC_STATE_SUSPENDED ||
+ hcd->state == HC_STATE_HALT)) {
+ dev_warn(dev, "Root hub is not suspended\n");
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static int hcd_pci_suspend(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+ int retval;
+
+ /* Root hub suspend should have stopped all downstream traffic,
+ * and all bus master traffic. And done so for both the interface
+ * and the stub usb_device (which we check here). But maybe it
+ * didn't; writing sysfs power/state files ignores such rules...
+ */
+ retval = check_root_hub_suspended(dev);
+ if (retval)
+ return retval;
+
+ /* We might already be suspended (runtime PM -- not yet written) */
+ if (pci_dev->current_state != PCI_D0)
+ return retval;
+
+ if (hcd->driver->pci_suspend) {
+ retval = hcd->driver->pci_suspend(hcd);
+ suspend_report_result(hcd->driver->pci_suspend, retval);
+ if (retval)
+ return retval;
+ }
+
+ synchronize_irq(pci_dev->irq);
+
+ /* Downstream ports from this root hub should already be quiesced, so
+ * there will be no DMA activity. Now we can shut down the upstream
+ * link (except maybe for PME# resume signaling). We'll enter a
+ * low power state during suspend_noirq, if the hardware allows.
+ */
+ pci_disable_device(pci_dev);
+ return retval;
+}
+
+static int hcd_pci_suspend_noirq(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+ int retval;
+
+ retval = check_root_hub_suspended(dev);
+ if (retval)
+ return retval;
+
+ pci_save_state(pci_dev);
+
+ /* If the root hub is HALTed rather than SUSPENDed,
+ * disallow remote wakeup.
+ */
+ if (hcd->state == HC_STATE_HALT)
+ device_set_wakeup_enable(dev, 0);
+ dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
+
+ /* Possibly enable remote wakeup,
+ * choose the appropriate low-power state, and go to that state.
+ */
+ retval = pci_prepare_to_sleep(pci_dev);
+ if (retval == -EIO) { /* Low-power not supported */
+ dev_dbg(dev, "--> PCI D0 legacy\n");
+ retval = 0;
+ } else if (retval == 0) {
+ dev_dbg(dev, "--> PCI %s\n",
+ pci_power_name(pci_dev->current_state));
+ } else {
+ suspend_report_result(pci_prepare_to_sleep, retval);
+ return retval;
+ }
+
+#ifdef CONFIG_PPC_PMAC
+ /* Disable ASIC clocks for USB */
+ if (machine_is(powermac)) {
+ struct device_node *of_node;
+
+ of_node = pci_device_to_OF_node(pci_dev);
+ if (of_node)
+ pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0);
+ }
+#endif
+ return retval;
+}
+
+static int hcd_pci_resume_noirq(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+
+#ifdef CONFIG_PPC_PMAC
+ /* Reenable ASIC clocks for USB */
+ if (machine_is(powermac)) {
+ struct device_node *of_node;
+
+ of_node = pci_device_to_OF_node(pci_dev);
+ if (of_node)
+ pmac_call_feature(PMAC_FTR_USB_ENABLE,
+ of_node, 0, 1);
+ }
+#endif
+
+ /* Go back to D0 and disable remote wakeup */
+ pci_back_from_sleep(pci_dev);
+ return 0;
+}
+
+static int resume_common(struct device *dev, bool hibernated)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+ int retval;
+
+ if (hcd->state != HC_STATE_SUSPENDED) {
+ dev_dbg(dev, "can't resume, not suspended!\n");
+ return 0;
+ }
+
+ retval = pci_enable_device(pci_dev);
+ if (retval < 0) {
+ dev_err(dev, "can't re-enable after resume, %d!\n", retval);
+ return retval;
+ }
+
+ pci_set_master(pci_dev);
+
+ clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+ if (hcd->driver->pci_resume) {
+ retval = hcd->driver->pci_resume(hcd, hibernated);
+ if (retval) {
+ dev_err(dev, "PCI post-resume error %d!\n", retval);
+ usb_hc_died(hcd);
+ }
+ }
+ return retval;
+}
+
+static int hcd_pci_resume(struct device *dev)
+{
+ return resume_common(dev, false);
+}
+
+static int hcd_pci_restore(struct device *dev)
+{
+ return resume_common(dev, true);
+}
+
+struct dev_pm_ops usb_hcd_pci_pm_ops = {
+ .suspend = hcd_pci_suspend,
+ .suspend_noirq = hcd_pci_suspend_noirq,
+ .resume_noirq = hcd_pci_resume_noirq,
+ .resume = hcd_pci_resume,
+ .freeze = check_root_hub_suspended,
+ .freeze_noirq = check_root_hub_suspended,
+ .thaw_noirq = NULL,
+ .thaw = NULL,
+ .poweroff = hcd_pci_suspend,
+ .poweroff_noirq = hcd_pci_suspend_noirq,
+ .restore_noirq = hcd_pci_resume_noirq,
+ .restore = hcd_pci_restore,
+};
+EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
+
+#endif /* CONFIG_PM_SLEEP */
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 42b93da..ce3f453 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -128,6 +128,27 @@
#define KERNEL_REL ((LINUX_VERSION_CODE >> 16) & 0x0ff)
#define KERNEL_VER ((LINUX_VERSION_CODE >> 8) & 0x0ff)
+/* usb 3.0 root hub device descriptor */
+static const u8 usb3_rh_dev_descriptor[18] = {
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x00, 0x03, /* __le16 bcdUSB; v3.0 */
+
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
+ 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
+
+ 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
+ 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
+ KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
+
+ 0x03, /* __u8 iManufacturer; */
+ 0x02, /* __u8 iProduct; */
+ 0x01, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
/* usb 2.0 root hub device descriptor */
static const u8 usb2_rh_dev_descriptor [18] = {
0x12, /* __u8 bLength; */
@@ -273,6 +294,47 @@
0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
};
+static const u8 ss_rh_config_descriptor[] = {
+ /* one configuration */
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, 0x00, /* __le16 wTotalLength; FIXME */
+ 0x01, /* __u8 bNumInterfaces; (1) */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0xc0, /* __u8 bmAttributes;
+ Bit 7: must be set,
+ 6: Self-powered,
+ 5: Remote wakeup,
+ 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* one interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* one endpoint (status change endpoint) */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
+ * see hub.c:hub_configure() for details. */
+ (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
+ 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
+ /*
+ * All 3.0 hubs should have an endpoint companion descriptor,
+ * but we're ignoring that for now. FIXME?
+ */
+};
+
/*-------------------------------------------------------------------------*/
/*
@@ -426,23 +488,39 @@
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
switch (wValue & 0xff00) {
case USB_DT_DEVICE << 8:
- if (hcd->driver->flags & HCD_USB2)
+ switch (hcd->driver->flags & HCD_MASK) {
+ case HCD_USB3:
+ bufp = usb3_rh_dev_descriptor;
+ break;
+ case HCD_USB2:
bufp = usb2_rh_dev_descriptor;
- else if (hcd->driver->flags & HCD_USB11)
+ break;
+ case HCD_USB11:
bufp = usb11_rh_dev_descriptor;
- else
+ break;
+ default:
goto error;
+ }
len = 18;
if (hcd->has_tt)
patch_protocol = 1;
break;
case USB_DT_CONFIG << 8:
- if (hcd->driver->flags & HCD_USB2) {
+ switch (hcd->driver->flags & HCD_MASK) {
+ case HCD_USB3:
+ bufp = ss_rh_config_descriptor;
+ len = sizeof ss_rh_config_descriptor;
+ break;
+ case HCD_USB2:
bufp = hs_rh_config_descriptor;
len = sizeof hs_rh_config_descriptor;
- } else {
+ break;
+ case HCD_USB11:
bufp = fs_rh_config_descriptor;
len = sizeof fs_rh_config_descriptor;
+ break;
+ default:
+ goto error;
}
if (device_can_wakeup(&hcd->self.root_hub->dev))
patch_wakeup = 1;
@@ -755,23 +833,6 @@
/*-------------------------------------------------------------------------*/
-static struct class *usb_host_class;
-
-int usb_host_init(void)
-{
- int retval = 0;
-
- usb_host_class = class_create(THIS_MODULE, "usb_host");
- if (IS_ERR(usb_host_class))
- retval = PTR_ERR(usb_host_class);
- return retval;
-}
-
-void usb_host_cleanup(void)
-{
- class_destroy(usb_host_class);
-}
-
/**
* usb_bus_init - shared initialization code
* @bus: the bus structure being initialized
@@ -818,12 +879,6 @@
set_bit (busnum, busmap.busmap);
bus->busnum = busnum;
- bus->dev = device_create(usb_host_class, bus->controller, MKDEV(0, 0),
- bus, "usb_host%d", busnum);
- result = PTR_ERR(bus->dev);
- if (IS_ERR(bus->dev))
- goto error_create_class_dev;
-
/* Add it to the local list of buses */
list_add (&bus->bus_list, &usb_bus_list);
mutex_unlock(&usb_bus_list_lock);
@@ -834,8 +889,6 @@
"number %d\n", bus->busnum);
return 0;
-error_create_class_dev:
- clear_bit(busnum, busmap.busmap);
error_find_busnum:
mutex_unlock(&usb_bus_list_lock);
return result;
@@ -865,8 +918,6 @@
usb_notify_remove_bus(bus);
clear_bit (bus->busnum, busmap.busmap);
-
- device_unregister(bus->dev);
}
/**
@@ -1199,7 +1250,8 @@
/* Map the URB's buffers for DMA access.
* Lower level HCD code should use *_dma exclusively,
- * unless it uses pio or talks to another transport.
+ * unless it uses pio or talks to another transport,
+ * or uses the provided scatter gather list for bulk.
*/
if (is_root_hub(urb->dev))
return 0;
@@ -1520,6 +1572,92 @@
}
}
+/* Check whether a new configuration or alt setting for an interface
+ * will exceed the bandwidth for the bus (or the host controller resources).
+ * Only pass in a non-NULL config or interface, not both!
+ * Passing NULL for both new_config and new_intf means the device will be
+ * de-configured by issuing a set configuration 0 command.
+ */
+int usb_hcd_check_bandwidth(struct usb_device *udev,
+ struct usb_host_config *new_config,
+ struct usb_interface *new_intf)
+{
+ int num_intfs, i, j;
+ struct usb_interface_cache *intf_cache;
+ struct usb_host_interface *alt = 0;
+ int ret = 0;
+ struct usb_hcd *hcd;
+ struct usb_host_endpoint *ep;
+
+ hcd = bus_to_hcd(udev->bus);
+ if (!hcd->driver->check_bandwidth)
+ return 0;
+
+ /* Configuration is being removed - set configuration 0 */
+ if (!new_config && !new_intf) {
+ for (i = 1; i < 16; ++i) {
+ ep = udev->ep_out[i];
+ if (ep)
+ hcd->driver->drop_endpoint(hcd, udev, ep);
+ ep = udev->ep_in[i];
+ if (ep)
+ hcd->driver->drop_endpoint(hcd, udev, ep);
+ }
+ hcd->driver->check_bandwidth(hcd, udev);
+ return 0;
+ }
+ /* Check if the HCD says there's enough bandwidth. Enable all endpoints
+ * each interface's alt setting 0 and ask the HCD to check the bandwidth
+ * of the bus. There will always be bandwidth for endpoint 0, so it's
+ * ok to exclude it.
+ */
+ if (new_config) {
+ num_intfs = new_config->desc.bNumInterfaces;
+ /* Remove endpoints (except endpoint 0, which is always on the
+ * schedule) from the old config from the schedule
+ */
+ for (i = 1; i < 16; ++i) {
+ ep = udev->ep_out[i];
+ if (ep) {
+ ret = hcd->driver->drop_endpoint(hcd, udev, ep);
+ if (ret < 0)
+ goto reset;
+ }
+ ep = udev->ep_in[i];
+ if (ep) {
+ ret = hcd->driver->drop_endpoint(hcd, udev, ep);
+ if (ret < 0)
+ goto reset;
+ }
+ }
+ for (i = 0; i < num_intfs; ++i) {
+
+ /* Dig the endpoints for alt setting 0 out of the
+ * interface cache for this interface
+ */
+ intf_cache = new_config->intf_cache[i];
+ for (j = 0; j < intf_cache->num_altsetting; j++) {
+ if (intf_cache->altsetting[j].desc.bAlternateSetting == 0)
+ alt = &intf_cache->altsetting[j];
+ }
+ if (!alt) {
+ printk(KERN_DEBUG "Did not find alt setting 0 for intf %d\n", i);
+ continue;
+ }
+ for (j = 0; j < alt->desc.bNumEndpoints; j++) {
+ ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
+ if (ret < 0)
+ goto reset;
+ }
+ }
+ }
+ ret = hcd->driver->check_bandwidth(hcd, udev);
+reset:
+ if (ret < 0)
+ hcd->driver->reset_bandwidth(hcd, udev);
+ return ret;
+}
+
/* Disables the endpoint: synchronizes with the hcd to make sure all
* endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
* have been called previously. Use for set_configuration, set_interface,
@@ -1897,8 +2035,20 @@
retval = -ENOMEM;
goto err_allocate_root_hub;
}
- rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
- USB_SPEED_FULL;
+
+ switch (hcd->driver->flags & HCD_MASK) {
+ case HCD_USB11:
+ rhdev->speed = USB_SPEED_FULL;
+ break;
+ case HCD_USB2:
+ rhdev->speed = USB_SPEED_HIGH;
+ break;
+ case HCD_USB3:
+ rhdev->speed = USB_SPEED_SUPER;
+ break;
+ default:
+ goto err_allocate_root_hub;
+ }
hcd->self.root_hub = rhdev;
/* wakeup flag init defaults to "everything works" for root hubs,
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index e7d4479..d397ecf 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -173,6 +173,8 @@
#define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */
#define HCD_USB11 0x0010 /* USB 1.1 */
#define HCD_USB2 0x0020 /* USB 2.0 */
+#define HCD_USB3 0x0040 /* USB 3.0 */
+#define HCD_MASK 0x0070
/* called to init HCD and root hub */
int (*reset) (struct usb_hcd *hcd);
@@ -182,10 +184,10 @@
* a whole, not just the root hub; they're for PCI bus glue.
*/
/* called after suspending the hub, before entering D3 etc */
- int (*pci_suspend) (struct usb_hcd *hcd, pm_message_t message);
+ int (*pci_suspend)(struct usb_hcd *hcd);
/* called after entering D0 (etc), before resuming the hub */
- int (*pci_resume) (struct usb_hcd *hcd);
+ int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
/* cleanly make HCD stop writing memory and doing I/O */
void (*stop) (struct usb_hcd *hcd);
@@ -224,6 +226,43 @@
void (*relinquish_port)(struct usb_hcd *, int);
/* has a port been handed over to a companion? */
int (*port_handed_over)(struct usb_hcd *, int);
+
+ /* xHCI specific functions */
+ /* Called by usb_alloc_dev to alloc HC device structures */
+ int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
+ /* Called by usb_release_dev to free HC device structures */
+ void (*free_dev)(struct usb_hcd *, struct usb_device *);
+
+ /* Bandwidth computation functions */
+ /* Note that add_endpoint() can only be called once per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * drop_endpoint() can only be called once per endpoint also.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ */
+ /* Allocate endpoint resources and add them to a new schedule */
+ int (*add_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *);
+ /* Drop an endpoint from a new schedule */
+ int (*drop_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *);
+ /* Check that a new hardware configuration, set using
+ * endpoint_enable and endpoint_disable, does not exceed bus
+ * bandwidth. This must be called before any set configuration
+ * or set interface requests are sent to the device.
+ */
+ int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
+ /* Reset the device schedule to the last known good schedule,
+ * which was set from a previous successful call to
+ * check_bandwidth(). This reverts any add_endpoint() and
+ * drop_endpoint() calls since that last successful call.
+ * Used for when a check_bandwidth() call fails due to resource
+ * or bandwidth constraints.
+ */
+ void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
+ /* Returns the hardware-chosen device address */
+ int (*address_device)(struct usb_hcd *, struct usb_device *udev);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
@@ -242,6 +281,9 @@
extern void usb_hcd_reset_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep);
extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
+extern int usb_hcd_check_bandwidth(struct usb_device *udev,
+ struct usb_host_config *new_config,
+ struct usb_interface *new_intf);
extern int usb_hcd_get_frame_number(struct usb_device *udev);
extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
@@ -261,14 +303,11 @@
extern int usb_hcd_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id);
extern void usb_hcd_pci_remove(struct pci_dev *dev);
-
-#ifdef CONFIG_PM
-extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_resume(struct pci_dev *dev);
-#endif /* CONFIG_PM */
-
extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
+#ifdef CONFIG_PM_SLEEP
+extern struct dev_pm_ops usb_hcd_pci_pm_ops;
+#endif
#endif /* CONFIG_PCI */
/* pci-ish (pdev null is ok) buffer alloc/mapping support */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index be86ae3..2af3b4f 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -155,6 +155,8 @@
return "480 Mb/s";
else if (portstatus & (1 << USB_PORT_FEAT_LOWSPEED))
return "1.5 Mb/s";
+ else if (portstatus & (1 << USB_PORT_FEAT_SUPERSPEED))
+ return "5.0 Gb/s";
else
return "12 Mb/s";
}
@@ -457,13 +459,13 @@
spin_lock_irqsave (&hub->tt.lock, flags);
while (--limit && !list_empty (&hub->tt.clear_list)) {
- struct list_head *temp;
+ struct list_head *next;
struct usb_tt_clear *clear;
struct usb_device *hdev = hub->hdev;
int status;
- temp = hub->tt.clear_list.next;
- clear = list_entry (temp, struct usb_tt_clear, clear_list);
+ next = hub->tt.clear_list.next;
+ clear = list_entry (next, struct usb_tt_clear, clear_list);
list_del (&clear->clear_list);
/* drop lock so HCD can concurrently report other TT errors */
@@ -951,6 +953,9 @@
ret);
hub->tt.hub = hdev;
break;
+ case 3:
+ /* USB 3.0 hubs don't have a TT */
+ break;
default:
dev_dbg(hub_dev, "Unrecognized hub protocol %d\n",
hdev->descriptor.bDeviceProtocol);
@@ -1323,6 +1328,11 @@
* 0 is reserved by USB for default address; (b) Linux's USB stack
* uses always #1 for the root hub of the controller. So USB stack's
* port #1, which is wusb virtual-port #0 has address #2.
+ *
+ * Devices connected under xHCI are not as simple. The host controller
+ * supports virtualization, so the hardware assigns device addresses and
+ * the HCD must setup data structures before issuing a set address
+ * command to the hardware.
*/
static void choose_address(struct usb_device *udev)
{
@@ -1642,6 +1652,9 @@
err = usb_configure_device(udev); /* detect & probe dev/intfs */
if (err < 0)
goto fail;
+ dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n",
+ udev->devnum, udev->bus->busnum,
+ (((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
/* export the usbdev device-node for libusb */
udev->dev.devt = MKDEV(USB_DEVICE_MAJOR,
(((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
@@ -2395,19 +2408,29 @@
static int hub_set_address(struct usb_device *udev, int devnum)
{
int retval;
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
- if (devnum <= 1)
+ /*
+ * The host controller will choose the device address,
+ * instead of the core having chosen it earlier
+ */
+ if (!hcd->driver->address_device && devnum <= 1)
return -EINVAL;
if (udev->state == USB_STATE_ADDRESS)
return 0;
if (udev->state != USB_STATE_DEFAULT)
return -EINVAL;
- retval = usb_control_msg(udev, usb_sndaddr0pipe(),
- USB_REQ_SET_ADDRESS, 0, devnum, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (hcd->driver->address_device) {
+ retval = hcd->driver->address_device(hcd, udev);
+ } else {
+ retval = usb_control_msg(udev, usb_sndaddr0pipe(),
+ USB_REQ_SET_ADDRESS, 0, devnum, 0,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (retval == 0)
+ update_address(udev, devnum);
+ }
if (retval == 0) {
/* Device now using proper address. */
- update_address(udev, devnum);
usb_set_device_state(udev, USB_STATE_ADDRESS);
usb_ep0_reinit(udev);
}
@@ -2430,6 +2453,7 @@
static DEFINE_MUTEX(usb_address0_mutex);
struct usb_device *hdev = hub->hdev;
+ struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
int i, j, retval;
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
@@ -2452,11 +2476,24 @@
mutex_lock(&usb_address0_mutex);
- /* Reset the device; full speed may morph to high speed */
- retval = hub_port_reset(hub, port1, udev, delay);
- if (retval < 0) /* error or disconnect */
+ if ((hcd->driver->flags & HCD_USB3) && udev->config) {
+ /* FIXME this will need special handling by the xHCI driver. */
+ dev_dbg(&udev->dev,
+ "xHCI reset of configured device "
+ "not supported yet.\n");
+ retval = -EINVAL;
goto fail;
- /* success, speed is known */
+ } else if (!udev->config && oldspeed == USB_SPEED_SUPER) {
+ /* Don't reset USB 3.0 devices during an initial setup */
+ usb_set_device_state(udev, USB_STATE_DEFAULT);
+ } else {
+ /* Reset the device; full speed may morph to high speed */
+ /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
+ retval = hub_port_reset(hub, port1, udev, delay);
+ if (retval < 0) /* error or disconnect */
+ goto fail;
+ /* success, speed is known */
+ }
retval = -ENODEV;
if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) {
@@ -2471,6 +2508,7 @@
* reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
*/
switch (udev->speed) {
+ case USB_SPEED_SUPER:
case USB_SPEED_VARIABLE: /* fixed at 512 */
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
break;
@@ -2496,16 +2534,20 @@
case USB_SPEED_LOW: speed = "low"; break;
case USB_SPEED_FULL: speed = "full"; break;
case USB_SPEED_HIGH: speed = "high"; break;
+ case USB_SPEED_SUPER:
+ speed = "super";
+ break;
case USB_SPEED_VARIABLE:
speed = "variable";
type = "Wireless ";
break;
default: speed = "?"; break;
}
- dev_info (&udev->dev,
- "%s %s speed %sUSB device using %s and address %d\n",
- (udev->config) ? "reset" : "new", speed, type,
- udev->bus->controller->driver->name, devnum);
+ if (udev->speed != USB_SPEED_SUPER)
+ dev_info(&udev->dev,
+ "%s %s speed %sUSB device using %s and address %d\n",
+ (udev->config) ? "reset" : "new", speed, type,
+ udev->bus->controller->driver->name, devnum);
/* Set up TT records, if needed */
if (hdev->tt) {
@@ -2530,7 +2572,11 @@
* value.
*/
for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
- if (USE_NEW_SCHEME(retry_counter)) {
+ /*
+ * An xHCI controller cannot send any packets to a device until
+ * a set address command successfully completes.
+ */
+ if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3)) {
struct usb_device_descriptor *buf;
int r = 0;
@@ -2596,7 +2642,7 @@
* unauthorized address in the Connect Ack sequence;
* authorization will assign the final address.
*/
- if (udev->wusb == 0) {
+ if (udev->wusb == 0) {
for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
retval = hub_set_address(udev, devnum);
if (retval >= 0)
@@ -2609,13 +2655,20 @@
devnum, retval);
goto fail;
}
+ if (udev->speed == USB_SPEED_SUPER) {
+ devnum = udev->devnum;
+ dev_info(&udev->dev,
+ "%s SuperSpeed USB device using %s and address %d\n",
+ (udev->config) ? "reset" : "new",
+ udev->bus->controller->driver->name, devnum);
+ }
/* cope with hardware quirkiness:
* - let SET_ADDRESS settle, some device hardware wants it
* - read ep0 maxpacket even for high and low speed,
*/
msleep(10);
- if (USE_NEW_SCHEME(retry_counter))
+ if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3))
break;
}
@@ -2634,8 +2687,11 @@
if (retval)
goto fail;
- i = udev->descriptor.bMaxPacketSize0 == 0xff? /* wusb device? */
- 512 : udev->descriptor.bMaxPacketSize0;
+ if (udev->descriptor.bMaxPacketSize0 == 0xff ||
+ udev->speed == USB_SPEED_SUPER)
+ i = 512;
+ else
+ i = udev->descriptor.bMaxPacketSize0;
if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
if (udev->speed != USB_SPEED_FULL ||
!(i == 8 || i == 16 || i == 32 || i == 64)) {
@@ -2847,19 +2903,41 @@
}
usb_set_device_state(udev, USB_STATE_POWERED);
- udev->speed = USB_SPEED_UNKNOWN;
udev->bus_mA = hub->mA_per_port;
udev->level = hdev->level + 1;
udev->wusb = hub_is_wusb(hub);
- /* set the address */
- choose_address(udev);
- if (udev->devnum <= 0) {
- status = -ENOTCONN; /* Don't retry */
- goto loop;
+ /*
+ * USB 3.0 devices are reset automatically before the connect
+ * port status change appears, and the root hub port status
+ * shows the correct speed. We also get port change
+ * notifications for USB 3.0 devices from the USB 3.0 portion of
+ * an external USB 3.0 hub, but this isn't handled correctly yet
+ * FIXME.
+ */
+
+ if (!(hcd->driver->flags & HCD_USB3))
+ udev->speed = USB_SPEED_UNKNOWN;
+ else if ((hdev->parent == NULL) &&
+ (portstatus & (1 << USB_PORT_FEAT_SUPERSPEED)))
+ udev->speed = USB_SPEED_SUPER;
+ else
+ udev->speed = USB_SPEED_UNKNOWN;
+
+ /*
+ * xHCI needs to issue an address device command later
+ * in the hub_port_init sequence for SS/HS/FS/LS devices.
+ */
+ if (!(hcd->driver->flags & HCD_USB3)) {
+ /* set the address */
+ choose_address(udev);
+ if (udev->devnum <= 0) {
+ status = -ENOTCONN; /* Don't retry */
+ goto loop;
+ }
}
- /* reset and get descriptor */
+ /* reset (non-USB 3.0 devices) and get descriptor */
status = hub_port_init(hub, udev, port1, i);
if (status < 0)
goto loop;
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 2a116ce..889c0f3 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -47,7 +47,10 @@
#define USB_PORT_FEAT_L1 5 /* L1 suspend */
#define USB_PORT_FEAT_POWER 8
#define USB_PORT_FEAT_LOWSPEED 9
+/* This value was never in Table 11-17 */
#define USB_PORT_FEAT_HIGHSPEED 10
+/* This value is also fake */
+#define USB_PORT_FEAT_SUPERSPEED 11
#define USB_PORT_FEAT_C_CONNECTION 16
#define USB_PORT_FEAT_C_ENABLE 17
#define USB_PORT_FEAT_C_SUSPEND 18
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b626283..2bed83c 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -10,6 +10,7 @@
#include <linux/mm.h>
#include <linux/timer.h>
#include <linux/ctype.h>
+#include <linux/nls.h>
#include <linux/device.h>
#include <linux/scatterlist.h>
#include <linux/usb/quirks.h>
@@ -364,6 +365,7 @@
int i;
int urb_flags;
int dma;
+ int use_sg;
if (!io || !dev || !sg
|| usb_pipecontrol(pipe)
@@ -391,7 +393,19 @@
if (io->entries <= 0)
return io->entries;
- io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
+ /* If we're running on an xHCI host controller, queue the whole scatter
+ * gather list with one call to urb_enqueue(). This is only for bulk,
+ * as that endpoint type does not care how the data gets broken up
+ * across frames.
+ */
+ if (usb_pipebulk(pipe) &&
+ bus_to_hcd(dev->bus)->driver->flags & HCD_USB3) {
+ io->urbs = kmalloc(sizeof *io->urbs, mem_flags);
+ use_sg = true;
+ } else {
+ io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
+ use_sg = false;
+ }
if (!io->urbs)
goto nomem;
@@ -401,62 +415,92 @@
if (usb_pipein(pipe))
urb_flags |= URB_SHORT_NOT_OK;
- for_each_sg(sg, sg, io->entries, i) {
- unsigned len;
-
- io->urbs[i] = usb_alloc_urb(0, mem_flags);
- if (!io->urbs[i]) {
- io->entries = i;
+ if (use_sg) {
+ io->urbs[0] = usb_alloc_urb(0, mem_flags);
+ if (!io->urbs[0]) {
+ io->entries = 0;
goto nomem;
}
- io->urbs[i]->dev = NULL;
- io->urbs[i]->pipe = pipe;
- io->urbs[i]->interval = period;
- io->urbs[i]->transfer_flags = urb_flags;
+ io->urbs[0]->dev = NULL;
+ io->urbs[0]->pipe = pipe;
+ io->urbs[0]->interval = period;
+ io->urbs[0]->transfer_flags = urb_flags;
- io->urbs[i]->complete = sg_complete;
- io->urbs[i]->context = io;
+ io->urbs[0]->complete = sg_complete;
+ io->urbs[0]->context = io;
+ /* A length of zero means transfer the whole sg list */
+ io->urbs[0]->transfer_buffer_length = length;
+ if (length == 0) {
+ for_each_sg(sg, sg, io->entries, i) {
+ io->urbs[0]->transfer_buffer_length +=
+ sg_dma_len(sg);
+ }
+ }
+ io->urbs[0]->sg = io;
+ io->urbs[0]->num_sgs = io->entries;
+ io->entries = 1;
+ } else {
+ for_each_sg(sg, sg, io->entries, i) {
+ unsigned len;
- /*
- * Some systems need to revert to PIO when DMA is temporarily
- * unavailable. For their sakes, both transfer_buffer and
- * transfer_dma are set when possible. However this can only
- * work on systems without:
- *
- * - HIGHMEM, since DMA buffers located in high memory are
- * not directly addressable by the CPU for PIO;
- *
- * - IOMMU, since dma_map_sg() is allowed to use an IOMMU to
- * make virtually discontiguous buffers be "dma-contiguous"
- * so that PIO and DMA need diferent numbers of URBs.
- *
- * So when HIGHMEM or IOMMU are in use, transfer_buffer is NULL
- * to prevent stale pointers and to help spot bugs.
- */
- if (dma) {
- io->urbs[i]->transfer_dma = sg_dma_address(sg);
- len = sg_dma_len(sg);
+ io->urbs[i] = usb_alloc_urb(0, mem_flags);
+ if (!io->urbs[i]) {
+ io->entries = i;
+ goto nomem;
+ }
+
+ io->urbs[i]->dev = NULL;
+ io->urbs[i]->pipe = pipe;
+ io->urbs[i]->interval = period;
+ io->urbs[i]->transfer_flags = urb_flags;
+
+ io->urbs[i]->complete = sg_complete;
+ io->urbs[i]->context = io;
+
+ /*
+ * Some systems need to revert to PIO when DMA is
+ * temporarily unavailable. For their sakes, both
+ * transfer_buffer and transfer_dma are set when
+ * possible. However this can only work on systems
+ * without:
+ *
+ * - HIGHMEM, since DMA buffers located in high memory
+ * are not directly addressable by the CPU for PIO;
+ *
+ * - IOMMU, since dma_map_sg() is allowed to use an
+ * IOMMU to make virtually discontiguous buffers be
+ * "dma-contiguous" so that PIO and DMA need diferent
+ * numbers of URBs.
+ *
+ * So when HIGHMEM or IOMMU are in use, transfer_buffer
+ * is NULL to prevent stale pointers and to help spot
+ * bugs.
+ */
+ if (dma) {
+ io->urbs[i]->transfer_dma = sg_dma_address(sg);
+ len = sg_dma_len(sg);
#if defined(CONFIG_HIGHMEM) || defined(CONFIG_GART_IOMMU)
- io->urbs[i]->transfer_buffer = NULL;
+ io->urbs[i]->transfer_buffer = NULL;
#else
- io->urbs[i]->transfer_buffer = sg_virt(sg);
+ io->urbs[i]->transfer_buffer = sg_virt(sg);
#endif
- } else {
- /* hc may use _only_ transfer_buffer */
- io->urbs[i]->transfer_buffer = sg_virt(sg);
- len = sg->length;
- }
+ } else {
+ /* hc may use _only_ transfer_buffer */
+ io->urbs[i]->transfer_buffer = sg_virt(sg);
+ len = sg->length;
+ }
- if (length) {
- len = min_t(unsigned, len, length);
- length -= len;
- if (length == 0)
- io->entries = i + 1;
+ if (length) {
+ len = min_t(unsigned, len, length);
+ length -= len;
+ if (length == 0)
+ io->entries = i + 1;
+ }
+ io->urbs[i]->transfer_buffer_length = len;
}
- io->urbs[i]->transfer_buffer_length = len;
+ io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
}
- io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
/* transaction state */
io->count = io->entries;
@@ -509,6 +553,10 @@
* could be transferred. That capability is less useful for low or full
* speed interrupt endpoints, which allow at most one packet per millisecond,
* of at most 8 or 64 bytes (respectively).
+ *
+ * It is not necessary to call this function to reserve bandwidth for devices
+ * under an xHCI host controller, as the bandwidth is reserved when the
+ * configuration or interface alt setting is selected.
*/
void usb_sg_wait(struct usb_sg_request *io)
{
@@ -759,7 +807,7 @@
}
/**
- * usb_string - returns ISO 8859-1 version of a string descriptor
+ * usb_string - returns UTF-8 version of a string descriptor
* @dev: the device whose string descriptor is being retrieved
* @index: the number of the descriptor
* @buf: where to put the string
@@ -767,17 +815,10 @@
* Context: !in_interrupt ()
*
* This converts the UTF-16LE encoded strings returned by devices, from
- * usb_get_string_descriptor(), to null-terminated ISO-8859-1 encoded ones
- * that are more usable in most kernel contexts. Note that all characters
- * in the chosen descriptor that can't be encoded using ISO-8859-1
- * are converted to the question mark ("?") character, and this function
+ * usb_get_string_descriptor(), to null-terminated UTF-8 encoded ones
+ * that are more usable in most kernel contexts. Note that this function
* chooses strings in the first language supported by the device.
*
- * The ASCII (or, redundantly, "US-ASCII") character set is the seven-bit
- * subset of ISO 8859-1. ISO-8859-1 is the eight-bit subset of Unicode,
- * and is appropriate for use many uses of English and several other
- * Western European languages. (But it doesn't include the "Euro" symbol.)
- *
* This call is synchronous, and may not be used in an interrupt context.
*
* Returns length of the string (>= 0) or usb_control_msg status (< 0).
@@ -786,7 +827,6 @@
{
unsigned char *tbuf;
int err;
- unsigned int u, idx;
if (dev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
@@ -821,16 +861,9 @@
goto errout;
size--; /* leave room for trailing NULL char in output buffer */
- for (idx = 0, u = 2; u < err; u += 2) {
- if (idx >= size)
- break;
- if (tbuf[u+1]) /* high byte */
- buf[idx++] = '?'; /* non ISO-8859-1 character */
- else
- buf[idx++] = tbuf[u];
- }
- buf[idx] = 0;
- err = idx;
+ err = utf16s_to_utf8s((wchar_t *) &tbuf[2], (err - 2) / 2,
+ UTF16_LITTLE_ENDIAN, buf, size);
+ buf[err] = 0;
if (tbuf[1] != USB_DT_STRING)
dev_dbg(&dev->dev,
@@ -843,6 +876,9 @@
}
EXPORT_SYMBOL_GPL(usb_string);
+/* one UTF-8-encoded 16-bit character has at most three bytes */
+#define MAX_USB_STRING_SIZE (127 * 3 + 1)
+
/**
* usb_cache_string - read a string descriptor and cache it for later use
* @udev: the device whose string descriptor is being read
@@ -860,9 +896,9 @@
if (index <= 0)
return NULL;
- buf = kmalloc(256, GFP_KERNEL);
+ buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL);
if (buf) {
- len = usb_string(udev, index, buf, 256);
+ len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
if (len > 0) {
smallbuf = kmalloc(++len, GFP_KERNEL);
if (!smallbuf)
@@ -1664,6 +1700,21 @@
if (ret)
goto free_interfaces;
+ /* Make sure we have bandwidth (and available HCD resources) for this
+ * configuration. Remove endpoints from the schedule if we're dropping
+ * this configuration to set configuration 0. After this point, the
+ * host controller will not allow submissions to dropped endpoints. If
+ * this call fails, the device state is unchanged.
+ */
+ if (cp)
+ ret = usb_hcd_check_bandwidth(dev, cp, NULL);
+ else
+ ret = usb_hcd_check_bandwidth(dev, NULL, NULL);
+ if (ret < 0) {
+ usb_autosuspend_device(dev);
+ goto free_interfaces;
+ }
+
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
@@ -1686,6 +1737,7 @@
dev->actconfig = cp;
if (!cp) {
usb_set_device_state(dev, USB_STATE_ADDRESS);
+ usb_hcd_check_bandwidth(dev, NULL, NULL);
usb_autosuspend_device(dev);
goto free_interfaces;
}
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index c667891..b5c72e4 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -552,8 +552,8 @@
static mode_t dev_string_attrs_are_visible(struct kobject *kobj,
struct attribute *a, int n)
{
- struct usb_device *udev = to_usb_device(
- container_of(kobj, struct device, kobj));
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct usb_device *udev = to_usb_device(dev);
if (a == &dev_attr_manufacturer.attr) {
if (udev->manufacturer == NULL)
@@ -585,8 +585,8 @@
read_descriptors(struct kobject *kobj, struct bin_attribute *attr,
char *buf, loff_t off, size_t count)
{
- struct usb_device *udev = to_usb_device(
- container_of(kobj, struct device, kobj));
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct usb_device *udev = to_usb_device(dev);
size_t nleft = count;
size_t srclen, n;
int cfgno;
@@ -786,8 +786,8 @@
static mode_t intf_assoc_attrs_are_visible(struct kobject *kobj,
struct attribute *a, int n)
{
- struct usb_interface *intf = to_usb_interface(
- container_of(kobj, struct device, kobj));
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct usb_interface *intf = to_usb_interface(dev);
if (intf->intf_assoc == NULL)
return 0;
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 3376055..0885d4a 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -241,6 +241,12 @@
* If the USB subsystem can't allocate sufficient bandwidth to perform
* the periodic request, submitting such a periodic request should fail.
*
+ * For devices under xHCI, the bandwidth is reserved at configuration time, or
+ * when the alt setting is selected. If there is not enough bus bandwidth, the
+ * configuration/alt setting request will fail. Therefore, submissions to
+ * periodic endpoints on devices under xHCI should never fail due to bandwidth
+ * constraints.
+ *
* Device drivers must explicitly request that repetition, by ensuring that
* some URB is always on the endpoint's queue (except possibly for short
* periods during completion callacks). When there is no longer an urb
@@ -351,6 +357,7 @@
if (xfertype == USB_ENDPOINT_XFER_ISOC) {
int n, len;
+ /* FIXME SuperSpeed isoc endpoints have up to 16 bursts */
/* "high bandwidth" mode, 1-3 packets/uframe? */
if (dev->speed == USB_SPEED_HIGH) {
int mult = 1 + ((max >> 11) & 0x03);
@@ -426,6 +433,11 @@
return -EINVAL;
/* too big? */
switch (dev->speed) {
+ case USB_SPEED_SUPER: /* units are 125us */
+ /* Handle up to 2^(16-1) microframes */
+ if (urb->interval > (1 << 15))
+ return -EINVAL;
+ max = 1 << 15;
case USB_SPEED_HIGH: /* units are microframes */
/* NOTE usb handles 2^15 */
if (urb->interval > (1024 * 8))
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 7eee400..a26f738 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -34,6 +34,7 @@
#include <linux/usb.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
+#include <linux/debugfs.h>
#include <asm/io.h>
#include <linux/scatterlist.h>
@@ -139,8 +140,7 @@
struct find_interface_arg *arg = data;
struct usb_interface *intf;
- /* can't look at usb devices, only interfaces */
- if (is_usb_device(dev))
+ if (!is_usb_interface(dev))
return 0;
intf = to_usb_interface(dev);
@@ -184,11 +184,16 @@
static void usb_release_dev(struct device *dev)
{
struct usb_device *udev;
+ struct usb_hcd *hcd;
udev = to_usb_device(dev);
+ hcd = bus_to_hcd(udev->bus);
usb_destroy_configuration(udev);
- usb_put_hcd(bus_to_hcd(udev->bus));
+ /* Root hubs aren't real devices, so don't free HCD resources */
+ if (hcd->driver->free_dev && udev->parent)
+ hcd->driver->free_dev(hcd, udev);
+ usb_put_hcd(hcd);
kfree(udev->product);
kfree(udev->manufacturer);
kfree(udev->serial);
@@ -305,10 +310,21 @@
#endif /* CONFIG_PM */
+
+static char *usb_nodename(struct device *dev)
+{
+ struct usb_device *usb_dev;
+
+ usb_dev = to_usb_device(dev);
+ return kasprintf(GFP_KERNEL, "bus/usb/%03d/%03d",
+ usb_dev->bus->busnum, usb_dev->devnum);
+}
+
struct device_type usb_device_type = {
.name = "usb_device",
.release = usb_release_dev,
.uevent = usb_dev_uevent,
+ .nodename = usb_nodename,
.pm = &usb_device_pm_ops,
};
@@ -348,6 +364,13 @@
kfree(dev);
return NULL;
}
+ /* Root hubs aren't true devices, so don't allocate HCD resources */
+ if (usb_hcd->driver->alloc_dev && parent &&
+ !usb_hcd->driver->alloc_dev(usb_hcd, dev)) {
+ usb_put_hcd(bus_to_hcd(bus));
+ kfree(dev);
+ return NULL;
+ }
device_initialize(&dev->dev);
dev->dev.bus = &usb_bus_type;
@@ -375,18 +398,24 @@
*/
if (unlikely(!parent)) {
dev->devpath[0] = '0';
+ dev->route = 0;
dev->dev.parent = bus->controller;
dev_set_name(&dev->dev, "usb%d", bus->busnum);
root_hub = 1;
} else {
/* match any labeling on the hubs; it's one-based */
- if (parent->devpath[0] == '0')
+ if (parent->devpath[0] == '0') {
snprintf(dev->devpath, sizeof dev->devpath,
"%d", port1);
- else
+ /* Root ports are not counted in route string */
+ dev->route = 0;
+ } else {
snprintf(dev->devpath, sizeof dev->devpath,
"%s.%d", parent->devpath, port1);
+ dev->route = parent->route +
+ (port1 << ((parent->level - 1)*4));
+ }
dev->dev.parent = &parent->dev;
dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath);
@@ -799,12 +828,12 @@
return;
if (controller->dma_mask) {
- dma_sync_single(controller,
+ dma_sync_single_for_cpu(controller,
urb->transfer_dma, urb->transfer_buffer_length,
usb_pipein(urb->pipe)
? DMA_FROM_DEVICE : DMA_TO_DEVICE);
if (usb_pipecontrol(urb->pipe))
- dma_sync_single(controller,
+ dma_sync_single_for_cpu(controller,
urb->setup_dma,
sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
@@ -922,8 +951,8 @@
|| !controller->dma_mask)
return;
- dma_sync_sg(controller, sg, n_hw_ents,
- is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ dma_sync_sg_for_cpu(controller, sg, n_hw_ents,
+ is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
EXPORT_SYMBOL_GPL(usb_buffer_dmasync_sg);
#endif
@@ -1001,6 +1030,35 @@
.notifier_call = usb_bus_notify,
};
+struct dentry *usb_debug_root;
+EXPORT_SYMBOL_GPL(usb_debug_root);
+
+struct dentry *usb_debug_devices;
+
+static int usb_debugfs_init(void)
+{
+ usb_debug_root = debugfs_create_dir("usb", NULL);
+ if (!usb_debug_root)
+ return -ENOENT;
+
+ usb_debug_devices = debugfs_create_file("devices", 0444,
+ usb_debug_root, NULL,
+ &usbfs_devices_fops);
+ if (!usb_debug_devices) {
+ debugfs_remove(usb_debug_root);
+ usb_debug_root = NULL;
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+static void usb_debugfs_cleanup(void)
+{
+ debugfs_remove(usb_debug_devices);
+ debugfs_remove(usb_debug_root);
+}
+
/*
* Init
*/
@@ -1012,6 +1070,10 @@
return 0;
}
+ retval = usb_debugfs_init();
+ if (retval)
+ goto out;
+
retval = ksuspend_usb_init();
if (retval)
goto out;
@@ -1021,9 +1083,6 @@
retval = bus_register_notifier(&usb_bus_type, &usb_bus_nb);
if (retval)
goto bus_notifier_failed;
- retval = usb_host_init();
- if (retval)
- goto host_init_failed;
retval = usb_major_init();
if (retval)
goto major_init_failed;
@@ -1053,8 +1112,6 @@
driver_register_failed:
usb_major_cleanup();
major_init_failed:
- usb_host_cleanup();
-host_init_failed:
bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
bus_notifier_failed:
bus_unregister(&usb_bus_type);
@@ -1079,10 +1136,10 @@
usb_deregister(&usbfs_driver);
usb_devio_cleanup();
usb_hub_cleanup();
- usb_host_cleanup();
bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
bus_unregister(&usb_bus_type);
ksuspend_usb_cleanup();
+ usb_debugfs_cleanup();
}
subsys_initcall(usb_init);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 79d8a9e..e2a8cfa 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -41,8 +41,6 @@
extern void usb_hub_cleanup(void);
extern int usb_major_init(void);
extern void usb_major_cleanup(void);
-extern int usb_host_init(void);
-extern void usb_host_cleanup(void);
#ifdef CONFIG_PM
@@ -106,6 +104,7 @@
extern struct bus_type usb_bus_type;
extern struct device_type usb_device_type;
extern struct device_type usb_if_device_type;
+extern struct device_type usb_ep_device_type;
extern struct usb_device_driver usb_generic_driver;
static inline int is_usb_device(const struct device *dev)
@@ -113,6 +112,16 @@
return dev->type == &usb_device_type;
}
+static inline int is_usb_interface(const struct device *dev)
+{
+ return dev->type == &usb_if_device_type;
+}
+
+static inline int is_usb_endpoint(const struct device *dev)
+{
+ return dev->type == &usb_ep_device_type;
+}
+
/* Do the same for device drivers and interface drivers. */
static inline int is_usb_device_driver(struct device_driver *drv)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 080bb1e..5d1ddf4 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -156,7 +156,7 @@
config USB_GADGET_FSL_USB2
boolean "Freescale Highspeed USB DR Peripheral Controller"
- depends on FSL_SOC
+ depends on FSL_SOC || ARCH_MXC
select USB_GADGET_DUALSPEED
help
Some of Freescale PowerPC processors have a High Speed
@@ -253,7 +253,7 @@
config USB_GADGET_PXA27X
boolean "PXA 27x"
- depends on ARCH_PXA && PXA27x
+ depends on ARCH_PXA && (PXA27x || PXA3xx)
select USB_OTG_UTILS
help
Intel's PXA 27x series XScale ARM v5TE processors include
@@ -272,6 +272,20 @@
default USB_GADGET
select USB_GADGET_SELECTED
+config USB_GADGET_S3C_HSOTG
+ boolean "S3C HS/OtG USB Device controller"
+ depends on S3C_DEV_USB_HSOTG
+ select USB_GADGET_S3C_HSOTG_PIO
+ help
+ The Samsung S3C64XX USB2.0 high-speed gadget controller
+ integrated into the S3C64XX series SoC.
+
+config USB_S3C_HSOTG
+ tristate
+ depends on USB_GADGET_S3C_HSOTG
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
config USB_GADGET_S3C2410
boolean "S3C2410 USB Device Controller"
depends on ARCH_S3C2410
@@ -460,6 +474,27 @@
default USB_GADGET
select USB_GADGET_SELECTED
+config USB_GADGET_LANGWELL
+ boolean "Intel Langwell USB Device Controller"
+ depends on PCI
+ select USB_GADGET_DUALSPEED
+ help
+ Intel Langwell USB Device Controller is a High-Speed USB
+ On-The-Go device controller.
+
+ The number of programmable endpoints is different through
+ controller revision.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "langwell_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_LANGWELL
+ tristate
+ depends on USB_GADGET_LANGWELL
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
#
# LAST -- dummy/emulated controller
@@ -566,6 +601,20 @@
the "B-Peripheral" role, that device will use HNP to let this
one serve as the USB host instead (in the "B-Host" role).
+config USB_AUDIO
+ tristate "Audio Gadget (EXPERIMENTAL)"
+ depends on SND
+ help
+ Gadget Audio is compatible with USB Audio Class specification 1.0.
+ It will include at least one AudioControl interface, zero or more
+ AudioStream interface and zero or more MIDIStream interface.
+
+ Gadget Audio will use on-board ALSA (CONFIG_SND) audio card to
+ playback or capture audio stream.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_audio".
+
config USB_ETH
tristate "Ethernet Gadget (with CDC Ethernet support)"
depends on NET
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 39a51d7..e6017e6 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -18,14 +18,21 @@
obj-$(CONFIG_USB_AT91) += at91_udc.o
obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
+fsl_usb2_udc-objs := fsl_udc_core.o
+ifeq ($(CONFIG_ARCH_MXC),y)
+fsl_usb2_udc-objs += fsl_mx3_udc.o
+endif
obj-$(CONFIG_USB_M66592) += m66592-udc.o
obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o
obj-$(CONFIG_USB_CI13XXX) += ci13xxx_udc.o
+obj-$(CONFIG_USB_S3C_HSOTG) += s3c-hsotg.o
+obj-$(CONFIG_USB_LANGWELL) += langwell_udc.o
#
# USB gadget drivers
#
g_zero-objs := zero.o
+g_audio-objs := audio.o
g_ether-objs := ether.o
g_serial-objs := serial.o
g_midi-objs := gmidi.o
@@ -35,6 +42,7 @@
g_cdc-objs := cdc2.o
obj-$(CONFIG_USB_ZERO) += g_zero.o
+obj-$(CONFIG_USB_AUDIO) += g_audio.o
obj-$(CONFIG_USB_ETH) += g_ether.o
obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 0b2bb8f..72bae8f 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -485,7 +485,7 @@
return -ESHUTDOWN;
}
- tmp = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ tmp = usb_endpoint_type(desc);
switch (tmp) {
case USB_ENDPOINT_XFER_CONTROL:
DBG("only one control endpoint\n");
@@ -517,7 +517,7 @@
local_irq_save(flags);
/* initialize endpoint to match this descriptor */
- ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0;
+ ep->is_in = usb_endpoint_dir_in(desc);
ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC);
ep->stopped = 0;
if (ep->is_in)
@@ -1574,7 +1574,7 @@
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
- udc->gadget.dev.driver_data = &driver->driver;
+ dev_set_drvdata(&udc->gadget.dev, &driver->driver);
udc->enabled = 1;
udc->selfpowered = 1;
@@ -1583,7 +1583,7 @@
DBG("driver->bind() returned %d\n", retval);
udc->driver = NULL;
udc->gadget.dev.driver = NULL;
- udc->gadget.dev.driver_data = NULL;
+ dev_set_drvdata(&udc->gadget.dev, NULL);
udc->enabled = 0;
udc->selfpowered = 0;
return retval;
@@ -1613,7 +1613,7 @@
driver->unbind(&udc->gadget);
udc->gadget.dev.driver = NULL;
- udc->gadget.dev.driver_data = NULL;
+ dev_set_drvdata(&udc->gadget.dev, NULL);
udc->driver = NULL;
DBG("unbound from %s\n", driver->driver.name);
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 05c913c..4e970cf 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -326,13 +326,7 @@
return 1;
}
-#if defined(CONFIG_AVR32)
-
-static void toggle_bias(int is_on)
-{
-}
-
-#elif defined(CONFIG_ARCH_AT91)
+#if defined(CONFIG_ARCH_AT91SAM9RL)
#include <mach/at91_pmc.h>
@@ -346,7 +340,13 @@
at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
}
-#endif /* CONFIG_ARCH_AT91 */
+#else
+
+static void toggle_bias(int is_on)
+{
+}
+
+#endif /* CONFIG_ARCH_AT91SAM9RL */
static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
{
@@ -550,12 +550,12 @@
DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
ep->ep.name, ept_cfg, maxpacket);
- if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+ if (usb_endpoint_dir_in(desc)) {
ep->is_in = 1;
ept_cfg |= USBA_EPT_DIR_IN;
}
- switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_CONTROL:
ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
new file mode 100644
index 0000000..94de7e8
--- /dev/null
+++ b/drivers/usb/gadget/audio.c
@@ -0,0 +1,302 @@
+/*
+ * audio.c -- Audio gadget driver
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+
+#include "u_audio.h"
+
+#define DRIVER_DESC "Linux USB Audio Gadget"
+#define DRIVER_VERSION "Dec 18, 2008"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module. So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+#include "composite.c"
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+
+#include "u_audio.c"
+#include "f_audio.c"
+
+/*-------------------------------------------------------------------------*/
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
+ * Instead: allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to NetChip Technologies for donating this product ID. */
+#define AUDIO_VENDOR_NUM 0x0525 /* NetChip */
+#define AUDIO_PRODUCT_NUM 0xa4a1 /* Linux-USB Audio Gadget */
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_device_descriptor device_desc = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+
+ .bcdUSB = __constant_cpu_to_le16(0x200),
+
+ .bDeviceClass = USB_CLASS_PER_INTERFACE,
+ .bDeviceSubClass = 0,
+ .bDeviceProtocol = 0,
+ /* .bMaxPacketSize0 = f(hardware) */
+
+ /* Vendor and product id defaults change according to what configs
+ * we support. (As does bNumConfigurations.) These values can
+ * also be overridden by module parameters.
+ */
+ .idVendor = __constant_cpu_to_le16(AUDIO_VENDOR_NUM),
+ .idProduct = __constant_cpu_to_le16(AUDIO_PRODUCT_NUM),
+ /* .bcdDevice = f(hardware) */
+ /* .iManufacturer = DYNAMIC */
+ /* .iProduct = DYNAMIC */
+ /* NO SERIAL NUMBER */
+ .bNumConfigurations = 1,
+};
+
+static struct usb_otg_descriptor otg_descriptor = {
+ .bLength = sizeof otg_descriptor,
+ .bDescriptorType = USB_DT_OTG,
+
+ /* REVISIT SRP-only hardware is possible, although
+ * it would not be called "OTG" ...
+ */
+ .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
+};
+
+static const struct usb_descriptor_header *otg_desc[] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * Handle USB audio endpoint set/get command in setup class request
+ */
+
+static int audio_set_endpoint_req(struct usb_configuration *c,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ int value = -EOPNOTSUPP;
+ u16 ep = le16_to_cpu(ctrl->wIndex);
+ u16 len = le16_to_cpu(ctrl->wLength);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+
+ DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, endpoint %d\n",
+ ctrl->bRequest, w_value, len, ep);
+
+ switch (ctrl->bRequest) {
+ case SET_CUR:
+ value = 0;
+ break;
+
+ case SET_MIN:
+ break;
+
+ case SET_MAX:
+ break;
+
+ case SET_RES:
+ break;
+
+ case SET_MEM:
+ break;
+
+ default:
+ break;
+ }
+
+ return value;
+}
+
+static int audio_get_endpoint_req(struct usb_configuration *c,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ int value = -EOPNOTSUPP;
+ u8 ep = ((le16_to_cpu(ctrl->wIndex) >> 8) & 0xFF);
+ u16 len = le16_to_cpu(ctrl->wLength);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+
+ DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, endpoint %d\n",
+ ctrl->bRequest, w_value, len, ep);
+
+ switch (ctrl->bRequest) {
+ case GET_CUR:
+ case GET_MIN:
+ case GET_MAX:
+ case GET_RES:
+ value = 3;
+ break;
+ case GET_MEM:
+ break;
+ default:
+ break;
+ }
+
+ return value;
+}
+
+static int
+audio_setup(struct usb_configuration *c, const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct usb_request *req = cdev->req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+
+ /* composite driver infrastructure handles everything except
+ * Audio class messages; interface activation uses set_alt().
+ */
+ switch (ctrl->bRequestType) {
+ case USB_AUDIO_SET_ENDPOINT:
+ value = audio_set_endpoint_req(c, ctrl);
+ break;
+
+ case USB_AUDIO_GET_ENDPOINT:
+ value = audio_get_endpoint_req(c, ctrl);
+ break;
+
+ default:
+ ERROR(cdev, "Invalid control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ }
+
+ /* respond with data transfer or status phase? */
+ if (value >= 0) {
+ DBG(cdev, "Audio req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ req->zero = 0;
+ req->length = value;
+ value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0)
+ ERROR(cdev, "Audio response on err %d\n", value);
+ }
+
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __init audio_do_config(struct usb_configuration *c)
+{
+ /* FIXME alloc iConfiguration string, set it in c->strings */
+
+ if (gadget_is_otg(c->cdev->gadget)) {
+ c->descriptors = otg_desc;
+ c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ audio_bind_config(c);
+
+ return 0;
+}
+
+static struct usb_configuration audio_config_driver = {
+ .label = DRIVER_DESC,
+ .bind = audio_do_config,
+ .setup = audio_setup,
+ .bConfigurationValue = 1,
+ /* .iConfiguration = DYNAMIC */
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init audio_bind(struct usb_composite_dev *cdev)
+{
+ int gcnum;
+ int status;
+
+ gcnum = usb_gadget_controller_number(cdev->gadget);
+ if (gcnum >= 0)
+ device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
+ else {
+ ERROR(cdev, "controller '%s' not recognized; trying %s\n",
+ cdev->gadget->name,
+ audio_config_driver.label);
+ device_desc.bcdDevice =
+ __constant_cpu_to_le16(0x0300 | 0x0099);
+ }
+
+ /* device descriptor strings: manufacturer, product */
+ snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
+ init_utsname()->sysname, init_utsname()->release,
+ cdev->gadget->name);
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail;
+ strings_dev[STRING_MANUFACTURER_IDX].id = status;
+ device_desc.iManufacturer = status;
+
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail;
+ strings_dev[STRING_PRODUCT_IDX].id = status;
+ device_desc.iProduct = status;
+
+ status = usb_add_config(cdev, &audio_config_driver);
+ if (status < 0)
+ goto fail;
+
+ INFO(cdev, "%s, version: %s\n", DRIVER_DESC, DRIVER_VERSION);
+ return 0;
+
+fail:
+ return status;
+}
+
+static int __exit audio_unbind(struct usb_composite_dev *cdev)
+{
+ return 0;
+}
+
+static struct usb_composite_driver audio_driver = {
+ .name = "g_audio",
+ .dev = &device_desc,
+ .strings = audio_strings,
+ .bind = audio_bind,
+ .unbind = __exit_p(audio_unbind),
+};
+
+static int __init init(void)
+{
+ return usb_composite_register(&audio_driver);
+}
+module_init(init);
+
+static void __exit cleanup(void)
+{
+ usb_composite_unregister(&audio_driver);
+}
+module_exit(cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Bryan Wu <cooloney@kernel.org>");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 38e531e..c7cb87a 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -1977,9 +1977,9 @@
if (!list_empty(&mEp->qh[mEp->dir].queue))
warn("enabling a non-empty endpoint!");
- mEp->dir = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? TX : RX;
- mEp->num = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
- mEp->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX;
+ mEp->num = usb_endpoint_num(desc);
+ mEp->type = usb_endpoint_type(desc);
mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize);
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
new file mode 100644
index 0000000..66527ba
--- /dev/null
+++ b/drivers/usb/gadget/f_audio.c
@@ -0,0 +1,707 @@
+/*
+ * f_audio.c -- USB Audio class function driver
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <asm/atomic.h>
+
+#include "u_audio.h"
+
+#define OUT_EP_MAX_PACKET_SIZE 200
+static int req_buf_size = OUT_EP_MAX_PACKET_SIZE;
+module_param(req_buf_size, int, S_IRUGO);
+MODULE_PARM_DESC(req_buf_size, "ISO OUT endpoint request buffer size");
+
+static int req_count = 256;
+module_param(req_count, int, S_IRUGO);
+MODULE_PARM_DESC(req_count, "ISO OUT endpoint request count");
+
+static int audio_buf_size = 48000;
+module_param(audio_buf_size, int, S_IRUGO);
+MODULE_PARM_DESC(audio_buf_size, "Audio buffer size");
+
+/*
+ * DESCRIPTORS ... most are static, but strings and full
+ * configuration descriptors are built on demand.
+ */
+
+/*
+ * We have two interfaces- AudioControl and AudioStreaming
+ * TODO: only supcard playback currently
+ */
+#define F_AUDIO_AC_INTERFACE 0
+#define F_AUDIO_AS_INTERFACE 1
+#define F_AUDIO_NUM_INTERFACES 2
+
+/* B.3.1 Standard AC Interface Descriptor */
+static struct usb_interface_descriptor ac_interface_desc __initdata = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bNumEndpoints = 0,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+};
+
+DECLARE_USB_AC_HEADER_DESCRIPTOR(2);
+
+#define USB_DT_AC_HEADER_LENGH USB_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES)
+/* B.3.2 Class-Specific AC Interface Descriptor */
+static struct usb_ac_header_descriptor_2 ac_header_desc = {
+ .bLength = USB_DT_AC_HEADER_LENGH,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = HEADER,
+ .bcdADC = __constant_cpu_to_le16(0x0100),
+ .wTotalLength = __constant_cpu_to_le16(USB_DT_AC_HEADER_LENGH),
+ .bInCollection = F_AUDIO_NUM_INTERFACES,
+ .baInterfaceNr = {
+ [0] = F_AUDIO_AC_INTERFACE,
+ [1] = F_AUDIO_AS_INTERFACE,
+ }
+};
+
+#define INPUT_TERMINAL_ID 1
+static struct usb_input_terminal_descriptor input_terminal_desc = {
+ .bLength = USB_DT_AC_INPUT_TERMINAL_SIZE,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = INPUT_TERMINAL,
+ .bTerminalID = INPUT_TERMINAL_ID,
+ .wTerminalType = USB_AC_TERMINAL_STREAMING,
+ .bAssocTerminal = 0,
+ .wChannelConfig = 0x3,
+};
+
+DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(0);
+
+#define FEATURE_UNIT_ID 2
+static struct usb_ac_feature_unit_descriptor_0 feature_unit_desc = {
+ .bLength = USB_DT_AC_FEATURE_UNIT_SIZE(0),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = FEATURE_UNIT,
+ .bUnitID = FEATURE_UNIT_ID,
+ .bSourceID = INPUT_TERMINAL_ID,
+ .bControlSize = 2,
+ .bmaControls[0] = (FU_MUTE | FU_VOLUME),
+};
+
+static struct usb_audio_control mute_control = {
+ .list = LIST_HEAD_INIT(mute_control.list),
+ .name = "Mute Control",
+ .type = MUTE_CONTROL,
+ /* Todo: add real Mute control code */
+ .set = generic_set_cmd,
+ .get = generic_get_cmd,
+};
+
+static struct usb_audio_control volume_control = {
+ .list = LIST_HEAD_INIT(volume_control.list),
+ .name = "Volume Control",
+ .type = VOLUME_CONTROL,
+ /* Todo: add real Volume control code */
+ .set = generic_set_cmd,
+ .get = generic_get_cmd,
+};
+
+static struct usb_audio_control_selector feature_unit = {
+ .list = LIST_HEAD_INIT(feature_unit.list),
+ .id = FEATURE_UNIT_ID,
+ .name = "Mute & Volume Control",
+ .type = FEATURE_UNIT,
+ .desc = (struct usb_descriptor_header *)&feature_unit_desc,
+};
+
+#define OUTPUT_TERMINAL_ID 3
+static struct usb_output_terminal_descriptor output_terminal_desc = {
+ .bLength = USB_DT_AC_OUTPUT_TERMINAL_SIZE,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = OUTPUT_TERMINAL,
+ .bTerminalID = OUTPUT_TERMINAL_ID,
+ .wTerminalType = USB_AC_OUTPUT_TERMINAL_SPEAKER,
+ .bAssocTerminal = FEATURE_UNIT_ID,
+ .bSourceID = FEATURE_UNIT_ID,
+};
+
+/* B.4.1 Standard AS Interface Descriptor */
+static struct usb_interface_descriptor as_interface_alt_0_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 0,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
+};
+
+static struct usb_interface_descriptor as_interface_alt_1_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bAlternateSetting = 1,
+ .bNumEndpoints = 1,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
+};
+
+/* B.4.2 Class-Specific AS Interface Descriptor */
+static struct usb_as_header_descriptor as_header_desc = {
+ .bLength = USB_DT_AS_HEADER_SIZE,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = AS_GENERAL,
+ .bTerminalLink = INPUT_TERMINAL_ID,
+ .bDelay = 1,
+ .wFormatTag = USB_AS_AUDIO_FORMAT_TYPE_I_PCM,
+};
+
+DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(1);
+
+static struct usb_as_formate_type_i_discrete_descriptor_1 as_type_i_desc = {
+ .bLength = USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(1),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = FORMAT_TYPE,
+ .bFormatType = USB_AS_FORMAT_TYPE_I,
+ .bSubframeSize = 2,
+ .bBitResolution = 16,
+ .bSamFreqType = 1,
+};
+
+/* Standard ISO OUT Endpoint Descriptor */
+static struct usb_endpoint_descriptor as_out_ep_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_AUDIO_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_AS_ENDPOINT_ADAPTIVE
+ | USB_ENDPOINT_XFER_ISOC,
+ .wMaxPacketSize = __constant_cpu_to_le16(OUT_EP_MAX_PACKET_SIZE),
+ .bInterval = 4,
+};
+
+/* Class-specific AS ISO OUT Endpoint Descriptor */
+static struct usb_as_iso_endpoint_descriptor as_iso_out_desc __initdata = {
+ .bLength = USB_AS_ISO_ENDPOINT_DESC_SIZE,
+ .bDescriptorType = USB_DT_CS_ENDPOINT,
+ .bDescriptorSubtype = EP_GENERAL,
+ .bmAttributes = 1,
+ .bLockDelayUnits = 1,
+ .wLockDelay = __constant_cpu_to_le16(1),
+};
+
+static struct usb_descriptor_header *f_audio_desc[] __initdata = {
+ (struct usb_descriptor_header *)&ac_interface_desc,
+ (struct usb_descriptor_header *)&ac_header_desc,
+
+ (struct usb_descriptor_header *)&input_terminal_desc,
+ (struct usb_descriptor_header *)&output_terminal_desc,
+ (struct usb_descriptor_header *)&feature_unit_desc,
+
+ (struct usb_descriptor_header *)&as_interface_alt_0_desc,
+ (struct usb_descriptor_header *)&as_interface_alt_1_desc,
+ (struct usb_descriptor_header *)&as_header_desc,
+
+ (struct usb_descriptor_header *)&as_type_i_desc,
+
+ (struct usb_descriptor_header *)&as_out_ep_desc,
+ (struct usb_descriptor_header *)&as_iso_out_desc,
+ NULL,
+};
+
+/* string IDs are assigned dynamically */
+
+#define STRING_MANUFACTURER_IDX 0
+#define STRING_PRODUCT_IDX 1
+
+static char manufacturer[50];
+
+static struct usb_string strings_dev[] = {
+ [STRING_MANUFACTURER_IDX].s = manufacturer,
+ [STRING_PRODUCT_IDX].s = DRIVER_DESC,
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+ .language = 0x0409, /* en-us */
+ .strings = strings_dev,
+};
+
+static struct usb_gadget_strings *audio_strings[] = {
+ &stringtab_dev,
+ NULL,
+};
+
+/*
+ * This function is an ALSA sound card following USB Audio Class Spec 1.0.
+ */
+
+/*-------------------------------------------------------------------------*/
+struct f_audio_buf {
+ u8 *buf;
+ int actual;
+ struct list_head list;
+};
+
+static struct f_audio_buf *f_audio_buffer_alloc(int buf_size)
+{
+ struct f_audio_buf *copy_buf;
+
+ copy_buf = kzalloc(sizeof *copy_buf, GFP_ATOMIC);
+ if (!copy_buf)
+ return (struct f_audio_buf *)-ENOMEM;
+
+ copy_buf->buf = kzalloc(buf_size, GFP_ATOMIC);
+ if (!copy_buf->buf) {
+ kfree(copy_buf);
+ return (struct f_audio_buf *)-ENOMEM;
+ }
+
+ return copy_buf;
+}
+
+static void f_audio_buffer_free(struct f_audio_buf *audio_buf)
+{
+ kfree(audio_buf->buf);
+ kfree(audio_buf);
+}
+/*-------------------------------------------------------------------------*/
+
+struct f_audio {
+ struct gaudio card;
+
+ /* endpoints handle full and/or high speeds */
+ struct usb_ep *out_ep;
+ struct usb_endpoint_descriptor *out_desc;
+
+ spinlock_t lock;
+ struct f_audio_buf *copy_buf;
+ struct work_struct playback_work;
+ struct list_head play_queue;
+
+ /* Control Set command */
+ struct list_head cs;
+ u8 set_cmd;
+ struct usb_audio_control *set_con;
+};
+
+static inline struct f_audio *func_to_audio(struct usb_function *f)
+{
+ return container_of(f, struct f_audio, card.func);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void f_audio_playback_work(struct work_struct *data)
+{
+ struct f_audio *audio = container_of(data, struct f_audio,
+ playback_work);
+ struct f_audio_buf *play_buf;
+
+ spin_lock_irq(&audio->lock);
+ if (list_empty(&audio->play_queue)) {
+ spin_unlock_irq(&audio->lock);
+ return;
+ }
+ play_buf = list_first_entry(&audio->play_queue,
+ struct f_audio_buf, list);
+ list_del(&play_buf->list);
+ spin_unlock_irq(&audio->lock);
+
+ u_audio_playback(&audio->card, play_buf->buf, play_buf->actual);
+ f_audio_buffer_free(play_buf);
+
+ return;
+}
+
+static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct f_audio *audio = req->context;
+ struct usb_composite_dev *cdev = audio->card.func.config->cdev;
+ struct f_audio_buf *copy_buf = audio->copy_buf;
+ int err;
+
+ if (!copy_buf)
+ return -EINVAL;
+
+ /* Copy buffer is full, add it to the play_queue */
+ if (audio_buf_size - copy_buf->actual < req->actual) {
+ list_add_tail(©_buf->list, &audio->play_queue);
+ schedule_work(&audio->playback_work);
+ copy_buf = f_audio_buffer_alloc(audio_buf_size);
+ if (copy_buf < 0)
+ return -ENOMEM;
+ }
+
+ memcpy(copy_buf->buf + copy_buf->actual, req->buf, req->actual);
+ copy_buf->actual += req->actual;
+ audio->copy_buf = copy_buf;
+
+ err = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (err)
+ ERROR(cdev, "%s queue req: %d\n", ep->name, err);
+
+ return 0;
+
+}
+
+static void f_audio_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct f_audio *audio = req->context;
+ int status = req->status;
+ u32 data = 0;
+ struct usb_ep *out_ep = audio->out_ep;
+
+ switch (status) {
+
+ case 0: /* normal completion? */
+ if (ep == out_ep)
+ f_audio_out_ep_complete(ep, req);
+ else if (audio->set_con) {
+ memcpy(&data, req->buf, req->length);
+ audio->set_con->set(audio->set_con, audio->set_cmd,
+ le16_to_cpu(data));
+ audio->set_con = NULL;
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static int audio_set_intf_req(struct usb_function *f,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct f_audio *audio = func_to_audio(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct usb_request *req = cdev->req;
+ u8 id = ((le16_to_cpu(ctrl->wIndex) >> 8) & 0xFF);
+ u16 len = le16_to_cpu(ctrl->wLength);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u8 con_sel = (w_value >> 8) & 0xFF;
+ u8 cmd = (ctrl->bRequest & 0x0F);
+ struct usb_audio_control_selector *cs;
+ struct usb_audio_control *con;
+
+ DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, entity %d\n",
+ ctrl->bRequest, w_value, len, id);
+
+ list_for_each_entry(cs, &audio->cs, list) {
+ if (cs->id == id) {
+ list_for_each_entry(con, &cs->control, list) {
+ if (con->type == con_sel) {
+ audio->set_con = con;
+ break;
+ }
+ }
+ break;
+ }
+ }
+
+ audio->set_cmd = cmd;
+ req->context = audio;
+ req->complete = f_audio_complete;
+
+ return len;
+}
+
+static int audio_get_intf_req(struct usb_function *f,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct f_audio *audio = func_to_audio(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct usb_request *req = cdev->req;
+ int value = -EOPNOTSUPP;
+ u8 id = ((le16_to_cpu(ctrl->wIndex) >> 8) & 0xFF);
+ u16 len = le16_to_cpu(ctrl->wLength);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u8 con_sel = (w_value >> 8) & 0xFF;
+ u8 cmd = (ctrl->bRequest & 0x0F);
+ struct usb_audio_control_selector *cs;
+ struct usb_audio_control *con;
+
+ DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, entity %d\n",
+ ctrl->bRequest, w_value, len, id);
+
+ list_for_each_entry(cs, &audio->cs, list) {
+ if (cs->id == id) {
+ list_for_each_entry(con, &cs->control, list) {
+ if (con->type == con_sel && con->get) {
+ value = con->get(con, cmd);
+ break;
+ }
+ }
+ break;
+ }
+ }
+
+ req->context = audio;
+ req->complete = f_audio_complete;
+ memcpy(req->buf, &value, len);
+
+ return len;
+}
+
+static int
+f_audio_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct usb_request *req = cdev->req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+
+ /* composite driver infrastructure handles everything except
+ * Audio class messages; interface activation uses set_alt().
+ */
+ switch (ctrl->bRequestType) {
+ case USB_AUDIO_SET_INTF:
+ value = audio_set_intf_req(f, ctrl);
+ break;
+
+ case USB_AUDIO_GET_INTF:
+ value = audio_get_intf_req(f, ctrl);
+ break;
+
+ default:
+ ERROR(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ }
+
+ /* respond with data transfer or status phase? */
+ if (value >= 0) {
+ DBG(cdev, "audio req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ req->zero = 0;
+ req->length = value;
+ value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0)
+ ERROR(cdev, "audio response on err %d\n", value);
+ }
+
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+ struct f_audio *audio = func_to_audio(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct usb_ep *out_ep = audio->out_ep;
+ struct usb_request *req;
+ int i = 0, err = 0;
+
+ DBG(cdev, "intf %d, alt %d\n", intf, alt);
+
+ if (intf == 1) {
+ if (alt == 1) {
+ usb_ep_enable(out_ep, audio->out_desc);
+ out_ep->driver_data = audio;
+ audio->copy_buf = f_audio_buffer_alloc(audio_buf_size);
+
+ /*
+ * allocate a bunch of read buffers
+ * and queue them all at once.
+ */
+ for (i = 0; i < req_count && err == 0; i++) {
+ req = usb_ep_alloc_request(out_ep, GFP_ATOMIC);
+ if (req) {
+ req->buf = kzalloc(req_buf_size,
+ GFP_ATOMIC);
+ if (req->buf) {
+ req->length = req_buf_size;
+ req->context = audio;
+ req->complete =
+ f_audio_complete;
+ err = usb_ep_queue(out_ep,
+ req, GFP_ATOMIC);
+ if (err)
+ ERROR(cdev,
+ "%s queue req: %d\n",
+ out_ep->name, err);
+ } else
+ err = -ENOMEM;
+ } else
+ err = -ENOMEM;
+ }
+
+ } else {
+ struct f_audio_buf *copy_buf = audio->copy_buf;
+ if (copy_buf) {
+ list_add_tail(©_buf->list,
+ &audio->play_queue);
+ schedule_work(&audio->playback_work);
+ }
+ }
+ }
+
+ return err;
+}
+
+static void f_audio_disable(struct usb_function *f)
+{
+ return;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void f_audio_build_desc(struct f_audio *audio)
+{
+ struct gaudio *card = &audio->card;
+ u8 *sam_freq;
+ int rate;
+
+ /* Set channel numbers */
+ input_terminal_desc.bNrChannels = u_audio_get_playback_channels(card);
+ as_type_i_desc.bNrChannels = u_audio_get_playback_channels(card);
+
+ /* Set sample rates */
+ rate = u_audio_get_playback_rate(card);
+ sam_freq = as_type_i_desc.tSamFreq[0];
+ memcpy(sam_freq, &rate, 3);
+
+ /* Todo: Set Sample bits and other parameters */
+
+ return;
+}
+
+/* audio function driver setup/binding */
+static int __init
+f_audio_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct f_audio *audio = func_to_audio(f);
+ int status;
+ struct usb_ep *ep;
+
+ f_audio_build_desc(audio);
+
+ /* allocate instance-specific interface IDs, and patch descriptors */
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ ac_interface_desc.bInterfaceNumber = status;
+
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ as_interface_alt_0_desc.bInterfaceNumber = status;
+ as_interface_alt_1_desc.bInterfaceNumber = status;
+
+ status = -ENODEV;
+
+ /* allocate instance-specific endpoints */
+ ep = usb_ep_autoconfig(cdev->gadget, &as_out_ep_desc);
+ if (!ep)
+ goto fail;
+ audio->out_ep = ep;
+ ep->driver_data = cdev; /* claim */
+
+ status = -ENOMEM;
+
+ /* supcard all relevant hardware speeds... we expect that when
+ * hardware is dual speed, all bulk-capable endpoints work at
+ * both speeds
+ */
+
+ /* copy descriptors, and track endpoint copies */
+ if (gadget_is_dualspeed(c->cdev->gadget)) {
+ c->highspeed = true;
+ f->hs_descriptors = usb_copy_descriptors(f_audio_desc);
+ } else
+ f->descriptors = usb_copy_descriptors(f_audio_desc);
+
+ return 0;
+
+fail:
+
+ return status;
+}
+
+static void
+f_audio_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct f_audio *audio = func_to_audio(f);
+
+ usb_free_descriptors(f->descriptors);
+ kfree(audio);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Todo: add more control selecotor dynamically */
+int __init control_selector_init(struct f_audio *audio)
+{
+ INIT_LIST_HEAD(&audio->cs);
+ list_add(&feature_unit.list, &audio->cs);
+
+ INIT_LIST_HEAD(&feature_unit.control);
+ list_add(&mute_control.list, &feature_unit.control);
+ list_add(&volume_control.list, &feature_unit.control);
+
+ volume_control.data[_CUR] = 0xffc0;
+ volume_control.data[_MIN] = 0xe3a0;
+ volume_control.data[_MAX] = 0xfff0;
+ volume_control.data[_RES] = 0x0030;
+
+ return 0;
+}
+
+/**
+ * audio_bind_config - add USB audio fucntion to a configuration
+ * @c: the configuration to supcard the USB audio function
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ */
+int __init audio_bind_config(struct usb_configuration *c)
+{
+ struct f_audio *audio;
+ int status;
+
+ /* allocate and initialize one new instance */
+ audio = kzalloc(sizeof *audio, GFP_KERNEL);
+ if (!audio)
+ return -ENOMEM;
+
+ audio->card.func.name = "g_audio";
+ audio->card.gadget = c->cdev->gadget;
+
+ INIT_LIST_HEAD(&audio->play_queue);
+ spin_lock_init(&audio->lock);
+
+ /* set up ASLA audio devices */
+ status = gaudio_setup(&audio->card);
+ if (status < 0)
+ goto setup_fail;
+
+ audio->card.func.strings = audio_strings;
+ audio->card.func.bind = f_audio_bind;
+ audio->card.func.unbind = f_audio_unbind;
+ audio->card.func.set_alt = f_audio_set_alt;
+ audio->card.func.setup = f_audio_setup;
+ audio->card.func.disable = f_audio_disable;
+ audio->out_desc = &as_out_ep_desc;
+
+ control_selector_init(audio);
+
+ INIT_WORK(&audio->playback_work, f_audio_playback_work);
+
+ status = usb_add_function(c, &audio->card.func);
+ if (status)
+ goto add_fail;
+
+ INFO(c->cdev, "audio_buf_size %d, req_buf_size %d, req_count %d\n",
+ audio_buf_size, req_buf_size, req_count);
+
+ return status;
+
+add_fail:
+ gaudio_cleanup(&audio->card);
+setup_fail:
+ kfree(audio);
+ return status;
+}
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 3279a47..424a37c 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -475,7 +475,9 @@
if (rndis->port.in_ep->driver_data) {
DBG(cdev, "reset rndis\n");
gether_disconnect(&rndis->port);
- } else {
+ }
+
+ if (!rndis->port.in) {
DBG(cdev, "init rndis\n");
rndis->port.in = ep_choose(cdev->gadget,
rndis->hs.in, rndis->fs.in);
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 381a53b..1e6aa50 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -248,6 +248,8 @@
#include <linux/freezer.h>
#include <linux/utsname.h>
+#include <asm/unaligned.h>
+
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
@@ -799,29 +801,9 @@
/* Routines for unaligned data access */
-static u16 get_be16(u8 *buf)
+static u32 get_unaligned_be24(u8 *buf)
{
- return ((u16) buf[0] << 8) | ((u16) buf[1]);
-}
-
-static u32 get_be32(u8 *buf)
-{
- return ((u32) buf[0] << 24) | ((u32) buf[1] << 16) |
- ((u32) buf[2] << 8) | ((u32) buf[3]);
-}
-
-static void put_be16(u8 *buf, u16 val)
-{
- buf[0] = val >> 8;
- buf[1] = val;
-}
-
-static void put_be32(u8 *buf, u32 val)
-{
- buf[0] = val >> 24;
- buf[1] = val >> 16;
- buf[2] = val >> 8;
- buf[3] = val & 0xff;
+ return 0xffffff & (u32) get_unaligned_be32(buf - 1);
}
@@ -1582,9 +1564,9 @@
/* Get the starting Logical Block Address and check that it's
* not too big */
if (fsg->cmnd[0] == SC_READ_6)
- lba = (fsg->cmnd[1] << 16) | get_be16(&fsg->cmnd[2]);
+ lba = get_unaligned_be24(&fsg->cmnd[1]);
else {
- lba = get_be32(&fsg->cmnd[2]);
+ lba = get_unaligned_be32(&fsg->cmnd[2]);
/* We allow DPO (Disable Page Out = don't save data in the
* cache) and FUA (Force Unit Access = don't read from the
@@ -1717,9 +1699,9 @@
/* Get the starting Logical Block Address and check that it's
* not too big */
if (fsg->cmnd[0] == SC_WRITE_6)
- lba = (fsg->cmnd[1] << 16) | get_be16(&fsg->cmnd[2]);
+ lba = get_unaligned_be24(&fsg->cmnd[1]);
else {
- lba = get_be32(&fsg->cmnd[2]);
+ lba = get_unaligned_be32(&fsg->cmnd[2]);
/* We allow DPO (Disable Page Out = don't save data in the
* cache) and FUA (Force Unit Access = write directly to the
@@ -1940,7 +1922,7 @@
/* Get the starting Logical Block Address and check that it's
* not too big */
- lba = get_be32(&fsg->cmnd[2]);
+ lba = get_unaligned_be32(&fsg->cmnd[2]);
if (lba >= curlun->num_sectors) {
curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
return -EINVAL;
@@ -1953,7 +1935,7 @@
return -EINVAL;
}
- verification_length = get_be16(&fsg->cmnd[7]);
+ verification_length = get_unaligned_be16(&fsg->cmnd[7]);
if (unlikely(verification_length == 0))
return -EIO; // No default reply
@@ -2103,7 +2085,7 @@
memset(buf, 0, 18);
buf[0] = valid | 0x70; // Valid, current error
buf[2] = SK(sd);
- put_be32(&buf[3], sdinfo); // Sense information
+ put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */
buf[7] = 18 - 8; // Additional sense length
buf[12] = ASC(sd);
buf[13] = ASCQ(sd);
@@ -2114,7 +2096,7 @@
static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
{
struct lun *curlun = fsg->curlun;
- u32 lba = get_be32(&fsg->cmnd[2]);
+ u32 lba = get_unaligned_be32(&fsg->cmnd[2]);
int pmi = fsg->cmnd[8];
u8 *buf = (u8 *) bh->buf;
@@ -2124,8 +2106,9 @@
return -EINVAL;
}
- put_be32(&buf[0], curlun->num_sectors - 1); // Max logical block
- put_be32(&buf[4], 512); // Block length
+ put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
+ /* Max logical block */
+ put_unaligned_be32(512, &buf[4]); /* Block length */
return 8;
}
@@ -2144,7 +2127,7 @@
dest[0] = 0; /* Reserved */
} else {
/* Absolute sector */
- put_be32(dest, addr);
+ put_unaligned_be32(addr, dest);
}
}
@@ -2152,7 +2135,7 @@
{
struct lun *curlun = fsg->curlun;
int msf = fsg->cmnd[1] & 0x02;
- u32 lba = get_be32(&fsg->cmnd[2]);
+ u32 lba = get_unaligned_be32(&fsg->cmnd[2]);
u8 *buf = (u8 *) bh->buf;
if ((fsg->cmnd[1] & ~0x02) != 0) { /* Mask away MSF */
@@ -2252,10 +2235,13 @@
buf[2] = 0x04; // Write cache enable,
// Read cache not disabled
// No cache retention priorities
- put_be16(&buf[4], 0xffff); // Don't disable prefetch
- // Minimum prefetch = 0
- put_be16(&buf[8], 0xffff); // Maximum prefetch
- put_be16(&buf[10], 0xffff); // Maximum prefetch ceiling
+ put_unaligned_be16(0xffff, &buf[4]);
+ /* Don't disable prefetch */
+ /* Minimum prefetch = 0 */
+ put_unaligned_be16(0xffff, &buf[8]);
+ /* Maximum prefetch */
+ put_unaligned_be16(0xffff, &buf[10]);
+ /* Maximum prefetch ceiling */
}
buf += 12;
}
@@ -2272,7 +2258,7 @@
if (mscmnd == SC_MODE_SENSE_6)
buf0[0] = len - 1;
else
- put_be16(buf0, len - 2);
+ put_unaligned_be16(len - 2, buf0);
return len;
}
@@ -2360,9 +2346,10 @@
buf[3] = 8; // Only the Current/Maximum Capacity Descriptor
buf += 4;
- put_be32(&buf[0], curlun->num_sectors); // Number of blocks
- put_be32(&buf[4], 512); // Block length
- buf[4] = 0x02; // Current capacity
+ put_unaligned_be32(curlun->num_sectors, &buf[0]);
+ /* Number of blocks */
+ put_unaligned_be32(512, &buf[4]); /* Block length */
+ buf[4] = 0x02; /* Current capacity */
return 12;
}
@@ -2882,7 +2869,7 @@
break;
case SC_MODE_SELECT_10:
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
(1<<1) | (3<<7), 0,
"MODE SELECT(10)")) == 0)
@@ -2898,7 +2885,7 @@
break;
case SC_MODE_SENSE_10:
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
(1<<1) | (1<<2) | (3<<7), 0,
"MODE SENSE(10)")) == 0)
@@ -2923,7 +2910,8 @@
break;
case SC_READ_10:
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]) << 9;
+ fsg->data_size_from_cmnd =
+ get_unaligned_be16(&fsg->cmnd[7]) << 9;
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
(1<<1) | (0xf<<2) | (3<<7), 1,
"READ(10)")) == 0)
@@ -2931,7 +2919,8 @@
break;
case SC_READ_12:
- fsg->data_size_from_cmnd = get_be32(&fsg->cmnd[6]) << 9;
+ fsg->data_size_from_cmnd =
+ get_unaligned_be32(&fsg->cmnd[6]) << 9;
if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST,
(1<<1) | (0xf<<2) | (0xf<<6), 1,
"READ(12)")) == 0)
@@ -2949,7 +2938,7 @@
case SC_READ_HEADER:
if (!mod_data.cdrom)
goto unknown_cmnd;
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
(3<<7) | (0x1f<<1), 1,
"READ HEADER")) == 0)
@@ -2959,7 +2948,7 @@
case SC_READ_TOC:
if (!mod_data.cdrom)
goto unknown_cmnd;
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
(7<<6) | (1<<1), 1,
"READ TOC")) == 0)
@@ -2967,7 +2956,7 @@
break;
case SC_READ_FORMAT_CAPACITIES:
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
(3<<7), 1,
"READ FORMAT CAPACITIES")) == 0)
@@ -3025,7 +3014,8 @@
break;
case SC_WRITE_10:
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]) << 9;
+ fsg->data_size_from_cmnd =
+ get_unaligned_be16(&fsg->cmnd[7]) << 9;
if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
(1<<1) | (0xf<<2) | (3<<7), 1,
"WRITE(10)")) == 0)
@@ -3033,7 +3023,8 @@
break;
case SC_WRITE_12:
- fsg->data_size_from_cmnd = get_be32(&fsg->cmnd[6]) << 9;
+ fsg->data_size_from_cmnd =
+ get_unaligned_be32(&fsg->cmnd[6]) << 9;
if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST,
(1<<1) | (0xf<<2) | (0xf<<6), 1,
"WRITE(12)")) == 0)
diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mx3_udc.c
new file mode 100644
index 0000000..4bc2bf3
--- /dev/null
+++ b/drivers/usb/gadget/fsl_mx3_udc.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Description:
+ * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c
+ * driver to function correctly on these systems.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fsl_devices.h>
+#include <linux/platform_device.h>
+
+static struct clk *mxc_ahb_clk;
+static struct clk *mxc_usb_clk;
+
+int fsl_udc_clk_init(struct platform_device *pdev)
+{
+ struct fsl_usb2_platform_data *pdata;
+ unsigned long freq;
+ int ret;
+
+ pdata = pdev->dev.platform_data;
+
+ mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
+ if (IS_ERR(mxc_ahb_clk))
+ return PTR_ERR(mxc_ahb_clk);
+
+ ret = clk_enable(mxc_ahb_clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
+ goto eenahb;
+ }
+
+ /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
+ mxc_usb_clk = clk_get(&pdev->dev, "usb");
+ if (IS_ERR(mxc_usb_clk)) {
+ dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
+ ret = PTR_ERR(mxc_usb_clk);
+ goto egusb;
+ }
+
+ freq = clk_get_rate(mxc_usb_clk);
+ if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
+ (freq < 59999000 || freq > 60001000)) {
+ dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
+ goto eclkrate;
+ }
+
+ ret = clk_enable(mxc_usb_clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
+ goto eenusb;
+ }
+
+ return 0;
+
+eenusb:
+eclkrate:
+ clk_put(mxc_usb_clk);
+ mxc_usb_clk = NULL;
+egusb:
+ clk_disable(mxc_ahb_clk);
+eenahb:
+ clk_put(mxc_ahb_clk);
+ return ret;
+}
+
+void fsl_udc_clk_finalize(struct platform_device *pdev)
+{
+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+
+ /* ULPI transceivers don't need usbpll */
+ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
+ clk_disable(mxc_usb_clk);
+ clk_put(mxc_usb_clk);
+ mxc_usb_clk = NULL;
+ }
+}
+
+void fsl_udc_clk_release(void)
+{
+ if (mxc_usb_clk) {
+ clk_disable(mxc_usb_clk);
+ clk_put(mxc_usb_clk);
+ }
+ clk_disable(mxc_ahb_clk);
+ clk_put(mxc_ahb_clk);
+}
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_udc_core.c
similarity index 98%
rename from drivers/usb/gadget/fsl_usb2_udc.c
rename to drivers/usb/gadget/fsl_udc_core.c
index 9d7b95d..42a74b8 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -38,6 +38,7 @@
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>
#include <linux/dmapool.h>
+#include <linux/delay.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -57,7 +58,9 @@
static const char driver_desc[] = DRIVER_DESC;
static struct usb_dr_device *dr_regs;
+#ifndef CONFIG_ARCH_MXC
static struct usb_sys_interface *usb_sys_regs;
+#endif
/* it is initialized in probe() */
static struct fsl_udc *udc_controller = NULL;
@@ -174,10 +177,34 @@
static int dr_controller_setup(struct fsl_udc *udc)
{
- unsigned int tmp = 0, portctrl = 0, ctrl = 0;
+ unsigned int tmp, portctrl;
+#ifndef CONFIG_ARCH_MXC
+ unsigned int ctrl;
+#endif
unsigned long timeout;
#define FSL_UDC_RESET_TIMEOUT 1000
+ /* Config PHY interface */
+ portctrl = fsl_readl(&dr_regs->portsc1);
+ portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
+ switch (udc->phy_mode) {
+ case FSL_USB2_PHY_ULPI:
+ portctrl |= PORTSCX_PTS_ULPI;
+ break;
+ case FSL_USB2_PHY_UTMI_WIDE:
+ portctrl |= PORTSCX_PTW_16BIT;
+ /* fall through */
+ case FSL_USB2_PHY_UTMI:
+ portctrl |= PORTSCX_PTS_UTMI;
+ break;
+ case FSL_USB2_PHY_SERIAL:
+ portctrl |= PORTSCX_PTS_FSLS;
+ break;
+ default:
+ return -EINVAL;
+ }
+ fsl_writel(portctrl, &dr_regs->portsc1);
+
/* Stop and reset the usb controller */
tmp = fsl_readl(&dr_regs->usbcmd);
tmp &= ~USB_CMD_RUN_STOP;
@@ -215,31 +242,12 @@
udc->ep_qh, (int)tmp,
fsl_readl(&dr_regs->endpointlistaddr));
- /* Config PHY interface */
- portctrl = fsl_readl(&dr_regs->portsc1);
- portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
- switch (udc->phy_mode) {
- case FSL_USB2_PHY_ULPI:
- portctrl |= PORTSCX_PTS_ULPI;
- break;
- case FSL_USB2_PHY_UTMI_WIDE:
- portctrl |= PORTSCX_PTW_16BIT;
- /* fall through */
- case FSL_USB2_PHY_UTMI:
- portctrl |= PORTSCX_PTS_UTMI;
- break;
- case FSL_USB2_PHY_SERIAL:
- portctrl |= PORTSCX_PTS_FSLS;
- break;
- default:
- return -EINVAL;
- }
- fsl_writel(portctrl, &dr_regs->portsc1);
-
/* Config control enable i/o output, cpu endian register */
+#ifndef CONFIG_ARCH_MXC
ctrl = __raw_readl(&usb_sys_regs->control);
ctrl |= USB_CTRL_IOENB;
__raw_writel(ctrl, &usb_sys_regs->control);
+#endif
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
/* Turn on cache snooping hardware, since some PowerPC platforms
@@ -2043,6 +2051,7 @@
size -= t;
next += t;
+#ifndef CONFIG_ARCH_MXC
tmp_reg = usb_sys_regs->snoop1;
t = scnprintf(next, size, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg);
size -= t;
@@ -2053,6 +2062,7 @@
tmp_reg);
size -= t;
next += t;
+#endif
/* ------fsl_udc, fsl_ep, fsl_request structure information ----- */
ep = &udc->eps[0];
@@ -2263,14 +2273,21 @@
goto err_kfree;
}
- dr_regs = ioremap(res->start, res->end - res->start + 1);
+ dr_regs = ioremap(res->start, resource_size(res));
if (!dr_regs) {
ret = -ENOMEM;
goto err_release_mem_region;
}
+#ifndef CONFIG_ARCH_MXC
usb_sys_regs = (struct usb_sys_interface *)
((u32)dr_regs + USB_DR_SYS_OFFSET);
+#endif
+
+ /* Initialize USB clocks */
+ ret = fsl_udc_clk_init(pdev);
+ if (ret < 0)
+ goto err_iounmap_noclk;
/* Read Device Controller Capability Parameters register */
dccparams = fsl_readl(&dr_regs->dccparams);
@@ -2308,6 +2325,8 @@
* leave usbintr reg untouched */
dr_controller_setup(udc_controller);
+ fsl_udc_clk_finalize(pdev);
+
/* Setup gadget structure */
udc_controller->gadget.ops = &fsl_gadget_ops;
udc_controller->gadget.is_dualspeed = 1;
@@ -2362,6 +2381,8 @@
err_free_irq:
free_irq(udc_controller->irq, udc_controller);
err_iounmap:
+ fsl_udc_clk_release();
+err_iounmap_noclk:
iounmap(dr_regs);
err_release_mem_region:
release_mem_region(res->start, res->end - res->start + 1);
@@ -2384,6 +2405,8 @@
return -ENODEV;
udc_controller->done = &done;
+ fsl_udc_clk_release();
+
/* DR has been stopped in usb_gadget_unregister_driver() */
remove_proc_file();
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index e63ef12..20aecee 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -563,4 +563,22 @@
* 2 + ((windex & USB_DIR_IN) ? 1 : 0))
#define get_pipe_by_ep(EP) (ep_index(EP) * 2 + ep_is_in(EP))
+struct platform_device;
+#ifdef CONFIG_ARCH_MXC
+int fsl_udc_clk_init(struct platform_device *pdev);
+void fsl_udc_clk_finalize(struct platform_device *pdev);
+void fsl_udc_clk_release(void);
+#else
+static inline int fsl_udc_clk_init(struct platform_device *pdev)
+{
+ return 0;
+}
+static inline void fsl_udc_clk_finalize(struct platform_device *pdev)
+{
+}
+static inline void fsl_udc_clk_release(void)
+{
+}
+#endif
+
#endif
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index ec6d439..8e0e9a0 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -137,6 +137,12 @@
#define gadget_is_musbhdrc(g) 0
#endif
+#ifdef CONFIG_USB_GADGET_LANGWELL
+#define gadget_is_langwell(g) (!strcmp("langwell_udc", (g)->name))
+#else
+#define gadget_is_langwell(g) 0
+#endif
+
/* from Montavista kernel (?) */
#ifdef CONFIG_USB_GADGET_MPC8272
#define gadget_is_mpc8272(g) !strcmp("mpc8272_udc", (g)->name)
@@ -231,6 +237,8 @@
return 0x22;
else if (gadget_is_ci13xxx(gadget))
return 0x23;
+ else if (gadget_is_langwell(gadget))
+ return 0x24;
return -ENOENT;
}
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index de010c9..112bb40 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -110,10 +110,10 @@
return -EINVAL;
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
return -ESHUTDOWN;
- if (ep->num != (desc->bEndpointAddress & 0x0f))
+ if (ep->num != usb_endpoint_num(desc))
return -EINVAL;
- switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_BULK:
case USB_ENDPOINT_XFER_INT:
break;
@@ -142,7 +142,7 @@
/* ep1/ep2 dma direction is chosen early; it works in the other
* direction, with pio. be cautious with out-dma.
*/
- ep->is_in = (USB_DIR_IN & desc->bEndpointAddress) != 0;
+ ep->is_in = usb_endpoint_dir_in(desc);
if (ep->is_in) {
mode |= 1;
ep->dma = (use_dma != 0) && (ep->num == UDC_MSTRD_ENDPOINT);
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 168658b..c52a681 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -415,6 +415,13 @@
u8 *buf;
int length, count, temp;
+ if (unlikely(__raw_readl(imx_ep->imx_usb->base +
+ USB_EP_STAT(EP_NO(imx_ep))) & EPSTAT_ZLPS)) {
+ D_TRX(imx_ep->imx_usb->dev, "<%s> zlp still queued in EP %s\n",
+ __func__, imx_ep->ep.name);
+ return -1;
+ }
+
buf = req->req.buf + req->req.actual;
prefetch(buf);
@@ -734,9 +741,12 @@
{
struct imx_request *req;
+ if (!usb_ep)
+ return NULL;
+
req = kzalloc(sizeof *req, gfp_flags);
- if (!req || !usb_ep)
- return 0;
+ if (!req)
+ return NULL;
INIT_LIST_HEAD(&req->queue);
req->in_use = 0;
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index d20937f..7d33f50 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -384,9 +384,8 @@
return value;
/* halt any endpoint by doing a "wrong direction" i/o call */
- if (data->desc.bEndpointAddress & USB_DIR_IN) {
- if ((data->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_ISOC)
+ if (usb_endpoint_dir_in(&data->desc)) {
+ if (usb_endpoint_xfer_isoc(&data->desc))
return -EINVAL;
DBG (data->dev, "%s halt\n", data->name);
spin_lock_irq (&data->dev->lock);
@@ -428,9 +427,8 @@
return value;
/* halt any endpoint by doing a "wrong direction" i/o call */
- if (!(data->desc.bEndpointAddress & USB_DIR_IN)) {
- if ((data->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_ISOC)
+ if (!usb_endpoint_dir_in(&data->desc)) {
+ if (usb_endpoint_xfer_isoc(&data->desc))
return -EINVAL;
DBG (data->dev, "%s halt\n", data->name);
spin_lock_irq (&data->dev->lock);
@@ -691,7 +689,7 @@
struct ep_data *epdata = iocb->ki_filp->private_data;
char *buf;
- if (unlikely(epdata->desc.bEndpointAddress & USB_DIR_IN))
+ if (unlikely(usb_endpoint_dir_in(&epdata->desc)))
return -EINVAL;
buf = kmalloc(iocb->ki_left, GFP_KERNEL);
@@ -711,7 +709,7 @@
size_t len = 0;
int i = 0;
- if (unlikely(!(epdata->desc.bEndpointAddress & USB_DIR_IN)))
+ if (unlikely(!usb_endpoint_dir_in(&epdata->desc)))
return -EINVAL;
buf = kmalloc(iocb->ki_left, GFP_KERNEL);
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
new file mode 100644
index 0000000..6829d59
--- /dev/null
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -0,0 +1,3373 @@
+/*
+ * Intel Langwell USB Device Controller driver
+ * Copyright (C) 2008-2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+
+/* #undef DEBUG */
+/* #undef VERBOSE */
+
+#if defined(CONFIG_USB_LANGWELL_OTG)
+#define OTG_TRANSCEIVER
+#endif
+
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+
+#include "langwell_udc.h"
+
+
+#define DRIVER_DESC "Intel Langwell USB Device Controller driver"
+#define DRIVER_VERSION "16 May 2009"
+
+static const char driver_name[] = "langwell_udc";
+static const char driver_desc[] = DRIVER_DESC;
+
+
+/* controller device global variable */
+static struct langwell_udc *the_controller;
+
+/* for endpoint 0 operations */
+static const struct usb_endpoint_descriptor
+langwell_ep0_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0,
+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+ .wMaxPacketSize = EP0_MAX_PKT_SIZE,
+};
+
+
+/*-------------------------------------------------------------------------*/
+/* debugging */
+
+#ifdef DEBUG
+#define DBG(dev, fmt, args...) \
+ pr_debug("%s %s: " fmt , driver_name, \
+ pci_name(dev->pdev), ## args)
+#else
+#define DBG(dev, fmt, args...) \
+ do { } while (0)
+#endif /* DEBUG */
+
+
+#ifdef VERBOSE
+#define VDBG DBG
+#else
+#define VDBG(dev, fmt, args...) \
+ do { } while (0)
+#endif /* VERBOSE */
+
+
+#define ERROR(dev, fmt, args...) \
+ pr_err("%s %s: " fmt , driver_name, \
+ pci_name(dev->pdev), ## args)
+
+#define WARNING(dev, fmt, args...) \
+ pr_warning("%s %s: " fmt , driver_name, \
+ pci_name(dev->pdev), ## args)
+
+#define INFO(dev, fmt, args...) \
+ pr_info("%s %s: " fmt , driver_name, \
+ pci_name(dev->pdev), ## args)
+
+
+#ifdef VERBOSE
+static inline void print_all_registers(struct langwell_udc *dev)
+{
+ int i;
+
+ /* Capability Registers */
+ printk(KERN_DEBUG "Capability Registers (offset: "
+ "0x%04x, length: 0x%08x)\n",
+ CAP_REG_OFFSET,
+ (u32)sizeof(struct langwell_cap_regs));
+ printk(KERN_DEBUG "caplength=0x%02x\n",
+ readb(&dev->cap_regs->caplength));
+ printk(KERN_DEBUG "hciversion=0x%04x\n",
+ readw(&dev->cap_regs->hciversion));
+ printk(KERN_DEBUG "hcsparams=0x%08x\n",
+ readl(&dev->cap_regs->hcsparams));
+ printk(KERN_DEBUG "hccparams=0x%08x\n",
+ readl(&dev->cap_regs->hccparams));
+ printk(KERN_DEBUG "dciversion=0x%04x\n",
+ readw(&dev->cap_regs->dciversion));
+ printk(KERN_DEBUG "dccparams=0x%08x\n",
+ readl(&dev->cap_regs->dccparams));
+
+ /* Operational Registers */
+ printk(KERN_DEBUG "Operational Registers (offset: "
+ "0x%04x, length: 0x%08x)\n",
+ OP_REG_OFFSET,
+ (u32)sizeof(struct langwell_op_regs));
+ printk(KERN_DEBUG "extsts=0x%08x\n",
+ readl(&dev->op_regs->extsts));
+ printk(KERN_DEBUG "extintr=0x%08x\n",
+ readl(&dev->op_regs->extintr));
+ printk(KERN_DEBUG "usbcmd=0x%08x\n",
+ readl(&dev->op_regs->usbcmd));
+ printk(KERN_DEBUG "usbsts=0x%08x\n",
+ readl(&dev->op_regs->usbsts));
+ printk(KERN_DEBUG "usbintr=0x%08x\n",
+ readl(&dev->op_regs->usbintr));
+ printk(KERN_DEBUG "frindex=0x%08x\n",
+ readl(&dev->op_regs->frindex));
+ printk(KERN_DEBUG "ctrldssegment=0x%08x\n",
+ readl(&dev->op_regs->ctrldssegment));
+ printk(KERN_DEBUG "deviceaddr=0x%08x\n",
+ readl(&dev->op_regs->deviceaddr));
+ printk(KERN_DEBUG "endpointlistaddr=0x%08x\n",
+ readl(&dev->op_regs->endpointlistaddr));
+ printk(KERN_DEBUG "ttctrl=0x%08x\n",
+ readl(&dev->op_regs->ttctrl));
+ printk(KERN_DEBUG "burstsize=0x%08x\n",
+ readl(&dev->op_regs->burstsize));
+ printk(KERN_DEBUG "txfilltuning=0x%08x\n",
+ readl(&dev->op_regs->txfilltuning));
+ printk(KERN_DEBUG "txttfilltuning=0x%08x\n",
+ readl(&dev->op_regs->txttfilltuning));
+ printk(KERN_DEBUG "ic_usb=0x%08x\n",
+ readl(&dev->op_regs->ic_usb));
+ printk(KERN_DEBUG "ulpi_viewport=0x%08x\n",
+ readl(&dev->op_regs->ulpi_viewport));
+ printk(KERN_DEBUG "configflag=0x%08x\n",
+ readl(&dev->op_regs->configflag));
+ printk(KERN_DEBUG "portsc1=0x%08x\n",
+ readl(&dev->op_regs->portsc1));
+ printk(KERN_DEBUG "devlc=0x%08x\n",
+ readl(&dev->op_regs->devlc));
+ printk(KERN_DEBUG "otgsc=0x%08x\n",
+ readl(&dev->op_regs->otgsc));
+ printk(KERN_DEBUG "usbmode=0x%08x\n",
+ readl(&dev->op_regs->usbmode));
+ printk(KERN_DEBUG "endptnak=0x%08x\n",
+ readl(&dev->op_regs->endptnak));
+ printk(KERN_DEBUG "endptnaken=0x%08x\n",
+ readl(&dev->op_regs->endptnaken));
+ printk(KERN_DEBUG "endptsetupstat=0x%08x\n",
+ readl(&dev->op_regs->endptsetupstat));
+ printk(KERN_DEBUG "endptprime=0x%08x\n",
+ readl(&dev->op_regs->endptprime));
+ printk(KERN_DEBUG "endptflush=0x%08x\n",
+ readl(&dev->op_regs->endptflush));
+ printk(KERN_DEBUG "endptstat=0x%08x\n",
+ readl(&dev->op_regs->endptstat));
+ printk(KERN_DEBUG "endptcomplete=0x%08x\n",
+ readl(&dev->op_regs->endptcomplete));
+
+ for (i = 0; i < dev->ep_max / 2; i++) {
+ printk(KERN_DEBUG "endptctrl[%d]=0x%08x\n",
+ i, readl(&dev->op_regs->endptctrl[i]));
+ }
+}
+#endif /* VERBOSE */
+
+
+/*-------------------------------------------------------------------------*/
+
+#define DIR_STRING(bAddress) (((bAddress) & USB_DIR_IN) ? "in" : "out")
+
+#define is_in(ep) (((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir == \
+ USB_DIR_IN) : ((ep)->desc->bEndpointAddress \
+ & USB_DIR_IN) == USB_DIR_IN)
+
+
+#ifdef DEBUG
+static char *type_string(u8 bmAttributes)
+{
+ switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_BULK:
+ return "bulk";
+ case USB_ENDPOINT_XFER_ISOC:
+ return "iso";
+ case USB_ENDPOINT_XFER_INT:
+ return "int";
+ };
+
+ return "control";
+}
+#endif
+
+
+/* configure endpoint control registers */
+static void ep_reset(struct langwell_ep *ep, unsigned char ep_num,
+ unsigned char is_in, unsigned char ep_type)
+{
+ struct langwell_udc *dev;
+ u32 endptctrl;
+
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+ if (is_in) { /* TX */
+ if (ep_num)
+ endptctrl |= EPCTRL_TXR;
+ endptctrl |= EPCTRL_TXE;
+ endptctrl |= ep_type << EPCTRL_TXT_SHIFT;
+ } else { /* RX */
+ if (ep_num)
+ endptctrl |= EPCTRL_RXR;
+ endptctrl |= EPCTRL_RXE;
+ endptctrl |= ep_type << EPCTRL_RXT_SHIFT;
+ }
+
+ writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* reset ep0 dQH and endptctrl */
+static void ep0_reset(struct langwell_udc *dev)
+{
+ struct langwell_ep *ep;
+ int i;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* ep0 in and out */
+ for (i = 0; i < 2; i++) {
+ ep = &dev->ep[i];
+ ep->dev = dev;
+
+ /* ep0 dQH */
+ ep->dqh = &dev->ep_dqh[i];
+
+ /* configure ep0 endpoint capabilities in dQH */
+ ep->dqh->dqh_ios = 1;
+ ep->dqh->dqh_mpl = EP0_MAX_PKT_SIZE;
+
+ /* FIXME: enable ep0-in HW zero length termination select */
+ if (is_in(ep))
+ ep->dqh->dqh_zlt = 0;
+ ep->dqh->dqh_mult = 0;
+
+ /* configure ep0 control registers */
+ ep_reset(&dev->ep[0], 0, i, USB_ENDPOINT_XFER_CONTROL);
+ }
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* endpoints operations */
+
+/* configure endpoint, making it usable */
+static int langwell_ep_enable(struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct langwell_udc *dev;
+ struct langwell_ep *ep;
+ u16 max = 0;
+ unsigned long flags;
+ int retval = 0;
+ unsigned char zlt, ios = 0, mult = 0;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !desc || ep->desc
+ || desc->bDescriptorType != USB_DT_ENDPOINT)
+ return -EINVAL;
+
+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+
+ max = le16_to_cpu(desc->wMaxPacketSize);
+
+ /*
+ * disable HW zero length termination select
+ * driver handles zero length packet through req->req.zero
+ */
+ zlt = 1;
+
+ /*
+ * sanity check type, direction, address, and then
+ * initialize the endpoint capabilities fields in dQH
+ */
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ ios = 1;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ if ((dev->gadget.speed == USB_SPEED_HIGH
+ && max != 512)
+ || (dev->gadget.speed == USB_SPEED_FULL
+ && max > 64)) {
+ goto done;
+ }
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
+ goto done;
+
+ switch (dev->gadget.speed) {
+ case USB_SPEED_HIGH:
+ if (max <= 1024)
+ break;
+ case USB_SPEED_FULL:
+ if (max <= 64)
+ break;
+ default:
+ if (max <= 8)
+ break;
+ goto done;
+ }
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (strstr(ep->ep.name, "-bulk")
+ || strstr(ep->ep.name, "-int"))
+ goto done;
+
+ switch (dev->gadget.speed) {
+ case USB_SPEED_HIGH:
+ if (max <= 1024)
+ break;
+ case USB_SPEED_FULL:
+ if (max <= 1023)
+ break;
+ default:
+ goto done;
+ }
+ /*
+ * FIXME:
+ * calculate transactions needed for high bandwidth iso
+ */
+ mult = (unsigned char)(1 + ((max >> 11) & 0x03));
+ max = max & 0x8ff; /* bit 0~10 */
+ /* 3 transactions at most */
+ if (mult > 3)
+ goto done;
+ break;
+ default:
+ goto done;
+ }
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* configure endpoint capabilities in dQH */
+ ep->dqh->dqh_ios = ios;
+ ep->dqh->dqh_mpl = cpu_to_le16(max);
+ ep->dqh->dqh_zlt = zlt;
+ ep->dqh->dqh_mult = mult;
+
+ ep->ep.maxpacket = max;
+ ep->desc = desc;
+ ep->stopped = 0;
+ ep->ep_num = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+
+ /* ep_type */
+ ep->ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+ /* configure endpoint control registers */
+ ep_reset(ep, ep->ep_num, is_in(ep), ep->ep_type);
+
+ DBG(dev, "enabled %s (ep%d%s-%s), max %04x\n",
+ _ep->name,
+ ep->ep_num,
+ DIR_STRING(desc->bEndpointAddress),
+ type_string(desc->bmAttributes),
+ max);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+done:
+ VDBG(dev, "<--- %s()\n", __func__);
+ return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* retire a request */
+static void done(struct langwell_ep *ep, struct langwell_request *req,
+ int status)
+{
+ struct langwell_udc *dev = ep->dev;
+ unsigned stopped = ep->stopped;
+ struct langwell_dtd *curr_dtd, *next_dtd;
+ int i;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* remove the req from ep->queue */
+ list_del_init(&req->queue);
+
+ if (req->req.status == -EINPROGRESS)
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ /* free dTD for the request */
+ next_dtd = req->head;
+ for (i = 0; i < req->dtd_count; i++) {
+ curr_dtd = next_dtd;
+ if (i != req->dtd_count - 1)
+ next_dtd = curr_dtd->next_dtd_virt;
+ dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma);
+ }
+
+ if (req->mapped) {
+ dma_unmap_single(&dev->pdev->dev, req->req.dma, req->req.length,
+ is_in(ep) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+ req->req.dma = DMA_ADDR_INVALID;
+ req->mapped = 0;
+ } else
+ dma_sync_single_for_cpu(&dev->pdev->dev, req->req.dma,
+ req->req.length,
+ is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+ if (status != -ESHUTDOWN)
+ DBG(dev, "complete %s, req %p, stat %d, len %u/%u\n",
+ ep->ep.name, &req->req, status,
+ req->req.actual, req->req.length);
+
+ /* don't modify queue heads during completion callback */
+ ep->stopped = 1;
+
+ spin_unlock(&dev->lock);
+ /* complete routine from gadget driver */
+ if (req->req.complete)
+ req->req.complete(&ep->ep, &req->req);
+
+ spin_lock(&dev->lock);
+ ep->stopped = stopped;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+static void langwell_ep_fifo_flush(struct usb_ep *_ep);
+
+/* delete all endpoint requests, called with spinlock held */
+static void nuke(struct langwell_ep *ep, int status)
+{
+ /* called with spinlock held */
+ ep->stopped = 1;
+
+ /* endpoint fifo flush */
+ if (&ep->ep && ep->desc)
+ langwell_ep_fifo_flush(&ep->ep);
+
+ while (!list_empty(&ep->queue)) {
+ struct langwell_request *req = NULL;
+ req = list_entry(ep->queue.next, struct langwell_request,
+ queue);
+ done(ep, req, status);
+ }
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* endpoint is no longer usable */
+static int langwell_ep_disable(struct usb_ep *_ep)
+{
+ struct langwell_ep *ep;
+ unsigned long flags;
+ struct langwell_udc *dev;
+ int ep_num;
+ u32 endptctrl;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !ep->desc)
+ return -EINVAL;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* disable endpoint control register */
+ ep_num = ep->ep_num;
+ endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+ if (is_in(ep))
+ endptctrl &= ~EPCTRL_TXE;
+ else
+ endptctrl &= ~EPCTRL_RXE;
+ writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+ /* nuke all pending requests (does flush) */
+ nuke(ep, -ESHUTDOWN);
+
+ ep->desc = NULL;
+ ep->stopped = 1;
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ DBG(dev, "disabled %s\n", _ep->name);
+ VDBG(dev, "<--- %s()\n", __func__);
+
+ return 0;
+}
+
+
+/* allocate a request object to use with this endpoint */
+static struct usb_request *langwell_alloc_request(struct usb_ep *_ep,
+ gfp_t gfp_flags)
+{
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+ struct langwell_request *req = NULL;
+
+ if (!_ep)
+ return NULL;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ req = kzalloc(sizeof(*req), gfp_flags);
+ if (!req)
+ return NULL;
+
+ req->req.dma = DMA_ADDR_INVALID;
+ INIT_LIST_HEAD(&req->queue);
+
+ VDBG(dev, "alloc request for %s\n", _ep->name);
+ VDBG(dev, "<--- %s()\n", __func__);
+ return &req->req;
+}
+
+
+/* free a request object */
+static void langwell_free_request(struct usb_ep *_ep,
+ struct usb_request *_req)
+{
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+ struct langwell_request *req = NULL;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !_req)
+ return;
+
+ req = container_of(_req, struct langwell_request, req);
+ WARN_ON(!list_empty(&req->queue));
+
+ if (_req)
+ kfree(req);
+
+ VDBG(dev, "free request for %s\n", _ep->name);
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* queue dTD and PRIME endpoint */
+static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
+{
+ u32 bit_mask, usbcmd, endptstat, dtd_dma;
+ u8 dtd_status;
+ int i;
+ struct langwell_dqh *dqh;
+ struct langwell_udc *dev;
+
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ i = ep->ep_num * 2 + is_in(ep);
+ dqh = &dev->ep_dqh[i];
+
+ if (ep->ep_num)
+ VDBG(dev, "%s\n", ep->name);
+ else
+ /* ep0 */
+ VDBG(dev, "%s-%s\n", ep->name, is_in(ep) ? "in" : "out");
+
+ VDBG(dev, "ep_dqh[%d] addr: 0x%08x\n", i, (u32)&(dev->ep_dqh[i]));
+
+ bit_mask = is_in(ep) ?
+ (1 << (ep->ep_num + 16)) : (1 << (ep->ep_num));
+
+ VDBG(dev, "bit_mask = 0x%08x\n", bit_mask);
+
+ /* check if the pipe is empty */
+ if (!(list_empty(&ep->queue))) {
+ /* add dTD to the end of linked list */
+ struct langwell_request *lastreq;
+ lastreq = list_entry(ep->queue.prev,
+ struct langwell_request, queue);
+
+ lastreq->tail->dtd_next =
+ cpu_to_le32(req->head->dtd_dma & DTD_NEXT_MASK);
+
+ /* read prime bit, if 1 goto out */
+ if (readl(&dev->op_regs->endptprime) & bit_mask)
+ goto out;
+
+ do {
+ /* set ATDTW bit in USBCMD */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ writel(usbcmd | CMD_ATDTW, &dev->op_regs->usbcmd);
+
+ /* read correct status bit */
+ endptstat = readl(&dev->op_regs->endptstat) & bit_mask;
+
+ } while (!(readl(&dev->op_regs->usbcmd) & CMD_ATDTW));
+
+ /* write ATDTW bit to 0 */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ writel(usbcmd & ~CMD_ATDTW, &dev->op_regs->usbcmd);
+
+ if (endptstat)
+ goto out;
+ }
+
+ /* write dQH next pointer and terminate bit to 0 */
+ dtd_dma = req->head->dtd_dma & DTD_NEXT_MASK;
+ dqh->dtd_next = cpu_to_le32(dtd_dma);
+
+ /* clear active and halt bit */
+ dtd_status = (u8) ~(DTD_STS_ACTIVE | DTD_STS_HALTED);
+ dqh->dtd_status &= dtd_status;
+ VDBG(dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
+
+ /* write 1 to endptprime register to PRIME endpoint */
+ bit_mask = is_in(ep) ? (1 << (ep->ep_num + 16)) : (1 << ep->ep_num);
+ VDBG(dev, "endprime bit_mask = 0x%08x\n", bit_mask);
+ writel(bit_mask, &dev->op_regs->endptprime);
+out:
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* fill in the dTD structure to build a transfer descriptor */
+static struct langwell_dtd *build_dtd(struct langwell_request *req,
+ unsigned *length, dma_addr_t *dma, int *is_last)
+{
+ u32 buf_ptr;
+ struct langwell_dtd *dtd;
+ struct langwell_udc *dev;
+ int i;
+
+ dev = req->ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* the maximum transfer length, up to 16k bytes */
+ *length = min(req->req.length - req->req.actual,
+ (unsigned)DTD_MAX_TRANSFER_LENGTH);
+
+ /* create dTD dma_pool resource */
+ dtd = dma_pool_alloc(dev->dtd_pool, GFP_KERNEL, dma);
+ if (dtd == NULL)
+ return dtd;
+ dtd->dtd_dma = *dma;
+
+ /* initialize buffer page pointers */
+ buf_ptr = (u32)(req->req.dma + req->req.actual);
+ for (i = 0; i < 5; i++)
+ dtd->dtd_buf[i] = cpu_to_le32(buf_ptr + i * PAGE_SIZE);
+
+ req->req.actual += *length;
+
+ /* fill in total bytes with transfer size */
+ dtd->dtd_total = cpu_to_le16(*length);
+ VDBG(dev, "dtd->dtd_total = %d\n", dtd->dtd_total);
+
+ /* set is_last flag if req->req.zero is set or not */
+ if (req->req.zero) {
+ if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
+ *is_last = 1;
+ else
+ *is_last = 0;
+ } else if (req->req.length == req->req.actual) {
+ *is_last = 1;
+ } else
+ *is_last = 0;
+
+ if (*is_last == 0)
+ VDBG(dev, "multi-dtd request!\n");
+
+ /* set interrupt on complete bit for the last dTD */
+ if (*is_last && !req->req.no_interrupt)
+ dtd->dtd_ioc = 1;
+
+ /* set multiplier override 0 for non-ISO and non-TX endpoint */
+ dtd->dtd_multo = 0;
+
+ /* set the active bit of status field to 1 */
+ dtd->dtd_status = DTD_STS_ACTIVE;
+ VDBG(dev, "dtd->dtd_status = 0x%02x\n", dtd->dtd_status);
+
+ VDBG(dev, "length = %d, dma addr= 0x%08x\n", *length, (int)*dma);
+ VDBG(dev, "<--- %s()\n", __func__);
+ return dtd;
+}
+
+
+/* generate dTD linked list for a request */
+static int req_to_dtd(struct langwell_request *req)
+{
+ unsigned count;
+ int is_last, is_first = 1;
+ struct langwell_dtd *dtd, *last_dtd = NULL;
+ struct langwell_udc *dev;
+ dma_addr_t dma;
+
+ dev = req->ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+ do {
+ dtd = build_dtd(req, &count, &dma, &is_last);
+ if (dtd == NULL)
+ return -ENOMEM;
+
+ if (is_first) {
+ is_first = 0;
+ req->head = dtd;
+ } else {
+ last_dtd->dtd_next = cpu_to_le32(dma);
+ last_dtd->next_dtd_virt = dtd;
+ }
+ last_dtd = dtd;
+ req->dtd_count++;
+ } while (!is_last);
+
+ /* set terminate bit to 1 for the last dTD */
+ dtd->dtd_next = DTD_TERM;
+
+ req->tail = dtd;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* queue (submits) an I/O requests to an endpoint */
+static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+ gfp_t gfp_flags)
+{
+ struct langwell_request *req;
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+ unsigned long flags;
+ int is_iso = 0, zlflag = 0;
+
+ /* always require a cpu-view buffer */
+ req = container_of(_req, struct langwell_request, req);
+ ep = container_of(_ep, struct langwell_ep, ep);
+
+ if (!_req || !_req->complete || !_req->buf
+ || !list_empty(&req->queue)) {
+ return -EINVAL;
+ }
+
+ if (unlikely(!_ep || !ep->desc))
+ return -EINVAL;
+
+ dev = ep->dev;
+ req->ep = ep;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+ if (req->req.length > ep->ep.maxpacket)
+ return -EMSGSIZE;
+ is_iso = 1;
+ }
+
+ if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
+ return -ESHUTDOWN;
+
+ /* set up dma mapping in case the caller didn't */
+ if (_req->dma == DMA_ADDR_INVALID) {
+ /* WORKAROUND: WARN_ON(size == 0) */
+ if (_req->length == 0) {
+ VDBG(dev, "req->length: 0->1\n");
+ zlflag = 1;
+ _req->length++;
+ }
+
+ _req->dma = dma_map_single(&dev->pdev->dev,
+ _req->buf, _req->length,
+ is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ if (zlflag && (_req->length == 1)) {
+ VDBG(dev, "req->length: 1->0\n");
+ zlflag = 0;
+ _req->length = 0;
+ }
+
+ req->mapped = 1;
+ VDBG(dev, "req->mapped = 1\n");
+ } else {
+ dma_sync_single_for_device(&dev->pdev->dev,
+ _req->dma, _req->length,
+ is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ req->mapped = 0;
+ VDBG(dev, "req->mapped = 0\n");
+ }
+
+ DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08x\n",
+ _ep->name,
+ _req, _req->length, _req->buf, _req->dma);
+
+ _req->status = -EINPROGRESS;
+ _req->actual = 0;
+ req->dtd_count = 0;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* build and put dTDs to endpoint queue */
+ if (!req_to_dtd(req)) {
+ queue_dtd(ep, req);
+ } else {
+ spin_unlock_irqrestore(&dev->lock, flags);
+ return -ENOMEM;
+ }
+
+ /* update ep0 state */
+ if (ep->ep_num == 0)
+ dev->ep0_state = DATA_STATE_XMIT;
+
+ if (likely(req != NULL)) {
+ list_add_tail(&req->queue, &ep->queue);
+ VDBG(dev, "list_add_tail() \n");
+ }
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* dequeue (cancels, unlinks) an I/O request from an endpoint */
+static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+ struct langwell_request *req;
+ unsigned long flags;
+ int stopped, ep_num, retval = 0;
+ u32 endptctrl;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !ep->desc || !_req)
+ return -EINVAL;
+
+ if (!dev->driver)
+ return -ESHUTDOWN;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ stopped = ep->stopped;
+
+ /* quiesce dma while we patch the queue */
+ ep->stopped = 1;
+ ep_num = ep->ep_num;
+
+ /* disable endpoint control register */
+ endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+ if (is_in(ep))
+ endptctrl &= ~EPCTRL_TXE;
+ else
+ endptctrl &= ~EPCTRL_RXE;
+ writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+ /* make sure it's still queued on this endpoint */
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+
+ if (&req->req != _req) {
+ retval = -EINVAL;
+ goto done;
+ }
+
+ /* queue head may be partially complete. */
+ if (ep->queue.next == &req->queue) {
+ DBG(dev, "unlink (%s) dma\n", _ep->name);
+ _req->status = -ECONNRESET;
+ langwell_ep_fifo_flush(&ep->ep);
+
+ /* not the last request in endpoint queue */
+ if (likely(ep->queue.next == &req->queue)) {
+ struct langwell_dqh *dqh;
+ struct langwell_request *next_req;
+
+ dqh = ep->dqh;
+ next_req = list_entry(req->queue.next,
+ struct langwell_request, queue);
+
+ /* point the dQH to the first dTD of next request */
+ writel((u32) next_req->head, &dqh->dqh_current);
+ }
+ } else {
+ struct langwell_request *prev_req;
+
+ prev_req = list_entry(req->queue.prev,
+ struct langwell_request, queue);
+ writel(readl(&req->tail->dtd_next),
+ &prev_req->tail->dtd_next);
+ }
+
+ done(ep, req, -ECONNRESET);
+
+done:
+ /* enable endpoint again */
+ endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+ if (is_in(ep))
+ endptctrl |= EPCTRL_TXE;
+ else
+ endptctrl |= EPCTRL_RXE;
+ writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+ ep->stopped = stopped;
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* endpoint set/clear halt */
+static void ep_set_halt(struct langwell_ep *ep, int value)
+{
+ u32 endptctrl = 0;
+ int ep_num;
+ struct langwell_udc *dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ ep_num = ep->ep_num;
+ endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+
+ /* value: 1 - set halt, 0 - clear halt */
+ if (value) {
+ /* set the stall bit */
+ if (is_in(ep))
+ endptctrl |= EPCTRL_TXS;
+ else
+ endptctrl |= EPCTRL_RXS;
+ } else {
+ /* clear the stall bit and reset data toggle */
+ if (is_in(ep)) {
+ endptctrl &= ~EPCTRL_TXS;
+ endptctrl |= EPCTRL_TXR;
+ } else {
+ endptctrl &= ~EPCTRL_RXS;
+ endptctrl |= EPCTRL_RXR;
+ }
+ }
+
+ writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* set the endpoint halt feature */
+static int langwell_ep_set_halt(struct usb_ep *_ep, int value)
+{
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+ unsigned long flags;
+ int retval = 0;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !ep->desc)
+ return -EINVAL;
+
+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+
+ if (ep->desc && (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_ISOC)
+ return -EOPNOTSUPP;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /*
+ * attempt to halt IN ep will fail if any transfer requests
+ * are still queue
+ */
+ if (!list_empty(&ep->queue) && is_in(ep) && value) {
+ /* IN endpoint FIFO holds bytes */
+ DBG(dev, "%s FIFO holds bytes\n", _ep->name);
+ retval = -EAGAIN;
+ goto done;
+ }
+
+ /* endpoint set/clear halt */
+ if (ep->ep_num) {
+ ep_set_halt(ep, value);
+ } else { /* endpoint 0 */
+ dev->ep0_state = WAIT_FOR_SETUP;
+ dev->ep0_dir = USB_DIR_OUT;
+ }
+done:
+ spin_unlock_irqrestore(&dev->lock, flags);
+ DBG(dev, "%s %s halt\n", _ep->name, value ? "set" : "clear");
+ VDBG(dev, "<--- %s()\n", __func__);
+ return retval;
+}
+
+
+/* set the halt feature and ignores clear requests */
+static int langwell_ep_set_wedge(struct usb_ep *_ep)
+{
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !ep->desc)
+ return -EINVAL;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return usb_ep_set_halt(_ep);
+}
+
+
+/* flush contents of a fifo */
+static void langwell_ep_fifo_flush(struct usb_ep *_ep)
+{
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+ u32 flush_bit;
+ unsigned long timeout;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !ep->desc) {
+ VDBG(dev, "ep or ep->desc is NULL\n");
+ VDBG(dev, "<--- %s()\n", __func__);
+ return;
+ }
+
+ VDBG(dev, "%s-%s fifo flush\n", _ep->name, is_in(ep) ? "in" : "out");
+
+ /* flush endpoint buffer */
+ if (ep->ep_num == 0)
+ flush_bit = (1 << 16) | 1;
+ else if (is_in(ep))
+ flush_bit = 1 << (ep->ep_num + 16); /* TX */
+ else
+ flush_bit = 1 << ep->ep_num; /* RX */
+
+ /* wait until flush complete */
+ timeout = jiffies + FLUSH_TIMEOUT;
+ do {
+ writel(flush_bit, &dev->op_regs->endptflush);
+ while (readl(&dev->op_regs->endptflush)) {
+ if (time_after(jiffies, timeout)) {
+ ERROR(dev, "ep flush timeout\n");
+ goto done;
+ }
+ cpu_relax();
+ }
+ } while (readl(&dev->op_regs->endptstat) & flush_bit);
+done:
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* endpoints operations structure */
+static const struct usb_ep_ops langwell_ep_ops = {
+
+ /* configure endpoint, making it usable */
+ .enable = langwell_ep_enable,
+
+ /* endpoint is no longer usable */
+ .disable = langwell_ep_disable,
+
+ /* allocate a request object to use with this endpoint */
+ .alloc_request = langwell_alloc_request,
+
+ /* free a request object */
+ .free_request = langwell_free_request,
+
+ /* queue (submits) an I/O requests to an endpoint */
+ .queue = langwell_ep_queue,
+
+ /* dequeue (cancels, unlinks) an I/O request from an endpoint */
+ .dequeue = langwell_ep_dequeue,
+
+ /* set the endpoint halt feature */
+ .set_halt = langwell_ep_set_halt,
+
+ /* set the halt feature and ignores clear requests */
+ .set_wedge = langwell_ep_set_wedge,
+
+ /* flush contents of a fifo */
+ .fifo_flush = langwell_ep_fifo_flush,
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* device controller usb_gadget_ops structure */
+
+/* returns the current frame number */
+static int langwell_get_frame(struct usb_gadget *_gadget)
+{
+ struct langwell_udc *dev;
+ u16 retval;
+
+ if (!_gadget)
+ return -ENODEV;
+
+ dev = container_of(_gadget, struct langwell_udc, gadget);
+ VDBG(dev, "---> %s()\n", __func__);
+
+ retval = readl(&dev->op_regs->frindex) & FRINDEX_MASK;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return retval;
+}
+
+
+/* tries to wake up the host connected to this gadget */
+static int langwell_wakeup(struct usb_gadget *_gadget)
+{
+ struct langwell_udc *dev;
+ u32 portsc1, devlc;
+ unsigned long flags;
+
+ if (!_gadget)
+ return 0;
+
+ dev = container_of(_gadget, struct langwell_udc, gadget);
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* Remote Wakeup feature not enabled by host */
+ if (!dev->remote_wakeup)
+ return -ENOTSUPP;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ portsc1 = readl(&dev->op_regs->portsc1);
+ if (!(portsc1 & PORTS_SUSP)) {
+ spin_unlock_irqrestore(&dev->lock, flags);
+ return 0;
+ }
+
+ /* LPM L1 to L0, remote wakeup */
+ if (dev->lpm && dev->lpm_state == LPM_L1) {
+ portsc1 |= PORTS_SLP;
+ writel(portsc1, &dev->op_regs->portsc1);
+ }
+
+ /* force port resume */
+ if (dev->usb_state == USB_STATE_SUSPENDED) {
+ portsc1 |= PORTS_FPR;
+ writel(portsc1, &dev->op_regs->portsc1);
+ }
+
+ /* exit PHY low power suspend */
+ devlc = readl(&dev->op_regs->devlc);
+ VDBG(dev, "devlc = 0x%08x\n", devlc);
+ devlc &= ~LPM_PHCD;
+ writel(devlc, &dev->op_regs->devlc);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* notify controller that VBUS is powered or not */
+static int langwell_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+ struct langwell_udc *dev;
+ unsigned long flags;
+ u32 usbcmd;
+
+ if (!_gadget)
+ return -ENODEV;
+
+ dev = container_of(_gadget, struct langwell_udc, gadget);
+ VDBG(dev, "---> %s()\n", __func__);
+
+ spin_lock_irqsave(&dev->lock, flags);
+ VDBG(dev, "VBUS status: %s\n", is_active ? "on" : "off");
+
+ dev->vbus_active = (is_active != 0);
+ if (dev->driver && dev->softconnected && dev->vbus_active) {
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd |= CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+ } else {
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd &= ~CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+ }
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* constrain controller's VBUS power usage */
+static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
+{
+ struct langwell_udc *dev;
+
+ if (!_gadget)
+ return -ENODEV;
+
+ dev = container_of(_gadget, struct langwell_udc, gadget);
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (dev->transceiver) {
+ VDBG(dev, "otg_set_power\n");
+ VDBG(dev, "<--- %s()\n", __func__);
+ return otg_set_power(dev->transceiver, mA);
+ }
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return -ENOTSUPP;
+}
+
+
+/* D+ pullup, software-controlled connect/disconnect to USB host */
+static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
+{
+ struct langwell_udc *dev;
+ u32 usbcmd;
+ unsigned long flags;
+
+ if (!_gadget)
+ return -ENODEV;
+
+ dev = container_of(_gadget, struct langwell_udc, gadget);
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ spin_lock_irqsave(&dev->lock, flags);
+ dev->softconnected = (is_on != 0);
+
+ if (dev->driver && dev->softconnected && dev->vbus_active) {
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd |= CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+ } else {
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd &= ~CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+ }
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* device controller usb_gadget_ops structure */
+static const struct usb_gadget_ops langwell_ops = {
+
+ /* returns the current frame number */
+ .get_frame = langwell_get_frame,
+
+ /* tries to wake up the host connected to this gadget */
+ .wakeup = langwell_wakeup,
+
+ /* set the device selfpowered feature, always selfpowered */
+ /* .set_selfpowered = langwell_set_selfpowered, */
+
+ /* notify controller that VBUS is powered or not */
+ .vbus_session = langwell_vbus_session,
+
+ /* constrain controller's VBUS power usage */
+ .vbus_draw = langwell_vbus_draw,
+
+ /* D+ pullup, software-controlled connect/disconnect to USB host */
+ .pullup = langwell_pullup,
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* device controller operations */
+
+/* reset device controller */
+static int langwell_udc_reset(struct langwell_udc *dev)
+{
+ u32 usbcmd, usbmode, devlc, endpointlistaddr;
+ unsigned long timeout;
+
+ if (!dev)
+ return -EINVAL;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ /* set controller to stop state */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd &= ~CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+
+ /* reset device controller */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd |= CMD_RST;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+
+ /* wait for reset to complete */
+ timeout = jiffies + RESET_TIMEOUT;
+ while (readl(&dev->op_regs->usbcmd) & CMD_RST) {
+ if (time_after(jiffies, timeout)) {
+ ERROR(dev, "device reset timeout\n");
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ }
+
+ /* set controller to device mode */
+ usbmode = readl(&dev->op_regs->usbmode);
+ usbmode |= MODE_DEVICE;
+
+ /* turn setup lockout off, require setup tripwire in usbcmd */
+ usbmode |= MODE_SLOM;
+
+ writel(usbmode, &dev->op_regs->usbmode);
+ usbmode = readl(&dev->op_regs->usbmode);
+ VDBG(dev, "usbmode=0x%08x\n", usbmode);
+
+ /* Write-Clear setup status */
+ writel(0, &dev->op_regs->usbsts);
+
+ /* if support USB LPM, ACK all LPM token */
+ if (dev->lpm) {
+ devlc = readl(&dev->op_regs->devlc);
+ devlc &= ~LPM_STL; /* don't STALL LPM token */
+ devlc &= ~LPM_NYT_ACK; /* ACK LPM token */
+ writel(devlc, &dev->op_regs->devlc);
+ }
+
+ /* fill endpointlistaddr register */
+ endpointlistaddr = dev->ep_dqh_dma;
+ endpointlistaddr &= ENDPOINTLISTADDR_MASK;
+ writel(endpointlistaddr, &dev->op_regs->endpointlistaddr);
+
+ VDBG(dev, "dQH base (vir: %p, phy: 0x%08x), endpointlistaddr=0x%08x\n",
+ dev->ep_dqh, endpointlistaddr,
+ readl(&dev->op_regs->endpointlistaddr));
+ DBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* reinitialize device controller endpoints */
+static int eps_reinit(struct langwell_udc *dev)
+{
+ struct langwell_ep *ep;
+ char name[14];
+ int i;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* initialize ep0 */
+ ep = &dev->ep[0];
+ ep->dev = dev;
+ strncpy(ep->name, "ep0", sizeof(ep->name));
+ ep->ep.name = ep->name;
+ ep->ep.ops = &langwell_ep_ops;
+ ep->stopped = 0;
+ ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
+ ep->ep_num = 0;
+ ep->desc = &langwell_ep0_desc;
+ INIT_LIST_HEAD(&ep->queue);
+
+ ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
+
+ /* initialize other endpoints */
+ for (i = 2; i < dev->ep_max; i++) {
+ ep = &dev->ep[i];
+ if (i % 2)
+ snprintf(name, sizeof(name), "ep%din", i / 2);
+ else
+ snprintf(name, sizeof(name), "ep%dout", i / 2);
+ ep->dev = dev;
+ strncpy(ep->name, name, sizeof(ep->name));
+ ep->ep.name = ep->name;
+
+ ep->ep.ops = &langwell_ep_ops;
+ ep->stopped = 0;
+ ep->ep.maxpacket = (unsigned short) ~0;
+ ep->ep_num = i / 2;
+
+ INIT_LIST_HEAD(&ep->queue);
+ list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+
+ ep->dqh = &dev->ep_dqh[i];
+ }
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* enable interrupt and set controller to run state */
+static void langwell_udc_start(struct langwell_udc *dev)
+{
+ u32 usbintr, usbcmd;
+ DBG(dev, "---> %s()\n", __func__);
+
+ /* enable interrupts */
+ usbintr = INTR_ULPIE /* ULPI */
+ | INTR_SLE /* suspend */
+ /* | INTR_SRE SOF received */
+ | INTR_URE /* USB reset */
+ | INTR_AAE /* async advance */
+ | INTR_SEE /* system error */
+ | INTR_FRE /* frame list rollover */
+ | INTR_PCE /* port change detect */
+ | INTR_UEE /* USB error interrupt */
+ | INTR_UE; /* USB interrupt */
+ writel(usbintr, &dev->op_regs->usbintr);
+
+ /* clear stopped bit */
+ dev->stopped = 0;
+
+ /* set controller to run */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd |= CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+
+ DBG(dev, "<--- %s()\n", __func__);
+ return;
+}
+
+
+/* disable interrupt and set controller to stop state */
+static void langwell_udc_stop(struct langwell_udc *dev)
+{
+ u32 usbcmd;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ /* disable all interrupts */
+ writel(0, &dev->op_regs->usbintr);
+
+ /* set stopped bit */
+ dev->stopped = 1;
+
+ /* set controller to stop state */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd &= ~CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+
+ DBG(dev, "<--- %s()\n", __func__);
+ return;
+}
+
+
+/* stop all USB activities */
+static void stop_activity(struct langwell_udc *dev,
+ struct usb_gadget_driver *driver)
+{
+ struct langwell_ep *ep;
+ DBG(dev, "---> %s()\n", __func__);
+
+ nuke(&dev->ep[0], -ESHUTDOWN);
+
+ list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
+ nuke(ep, -ESHUTDOWN);
+ }
+
+ /* report disconnect; the driver is already quiesced */
+ if (driver) {
+ spin_unlock(&dev->lock);
+ driver->disconnect(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
+
+ DBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* device "function" sysfs attribute file */
+static ssize_t show_function(struct device *_dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct langwell_udc *dev = the_controller;
+
+ if (!dev->driver || !dev->driver->function
+ || strlen(dev->driver->function) > PAGE_SIZE)
+ return 0;
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
+}
+static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
+
+
+/* device "langwell_udc" sysfs attribute file */
+static ssize_t show_langwell_udc(struct device *_dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct langwell_udc *dev = the_controller;
+ struct langwell_request *req;
+ struct langwell_ep *ep = NULL;
+ char *next;
+ unsigned size;
+ unsigned t;
+ unsigned i;
+ unsigned long flags;
+ u32 tmp_reg;
+
+ next = buf;
+ size = PAGE_SIZE;
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* driver basic information */
+ t = scnprintf(next, size,
+ DRIVER_DESC "\n"
+ "%s version: %s\n"
+ "Gadget driver: %s\n\n",
+ driver_name, DRIVER_VERSION,
+ dev->driver ? dev->driver->driver.name : "(none)");
+ size -= t;
+ next += t;
+
+ /* device registers */
+ tmp_reg = readl(&dev->op_regs->usbcmd);
+ t = scnprintf(next, size,
+ "USBCMD reg:\n"
+ "SetupTW: %d\n"
+ "Run/Stop: %s\n\n",
+ (tmp_reg & CMD_SUTW) ? 1 : 0,
+ (tmp_reg & CMD_RUNSTOP) ? "Run" : "Stop");
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->usbsts);
+ t = scnprintf(next, size,
+ "USB Status Reg:\n"
+ "Device Suspend: %d\n"
+ "Reset Received: %d\n"
+ "System Error: %s\n"
+ "USB Error Interrupt: %s\n\n",
+ (tmp_reg & STS_SLI) ? 1 : 0,
+ (tmp_reg & STS_URI) ? 1 : 0,
+ (tmp_reg & STS_SEI) ? "Error" : "No error",
+ (tmp_reg & STS_UEI) ? "Error detected" : "No error");
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->usbintr);
+ t = scnprintf(next, size,
+ "USB Intrrupt Enable Reg:\n"
+ "Sleep Enable: %d\n"
+ "SOF Received Enable: %d\n"
+ "Reset Enable: %d\n"
+ "System Error Enable: %d\n"
+ "Port Change Dectected Enable: %d\n"
+ "USB Error Intr Enable: %d\n"
+ "USB Intr Enable: %d\n\n",
+ (tmp_reg & INTR_SLE) ? 1 : 0,
+ (tmp_reg & INTR_SRE) ? 1 : 0,
+ (tmp_reg & INTR_URE) ? 1 : 0,
+ (tmp_reg & INTR_SEE) ? 1 : 0,
+ (tmp_reg & INTR_PCE) ? 1 : 0,
+ (tmp_reg & INTR_UEE) ? 1 : 0,
+ (tmp_reg & INTR_UE) ? 1 : 0);
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->frindex);
+ t = scnprintf(next, size,
+ "USB Frame Index Reg:\n"
+ "Frame Number is 0x%08x\n\n",
+ (tmp_reg & FRINDEX_MASK));
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->deviceaddr);
+ t = scnprintf(next, size,
+ "USB Device Address Reg:\n"
+ "Device Addr is 0x%x\n\n",
+ USBADR(tmp_reg));
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->endpointlistaddr);
+ t = scnprintf(next, size,
+ "USB Endpoint List Address Reg:\n"
+ "Endpoint List Pointer is 0x%x\n\n",
+ EPBASE(tmp_reg));
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->portsc1);
+ t = scnprintf(next, size,
+ "USB Port Status & Control Reg:\n"
+ "Port Reset: %s\n"
+ "Port Suspend Mode: %s\n"
+ "Over-current Change: %s\n"
+ "Port Enable/Disable Change: %s\n"
+ "Port Enabled/Disabled: %s\n"
+ "Current Connect Status: %s\n\n",
+ (tmp_reg & PORTS_PR) ? "Reset" : "Not Reset",
+ (tmp_reg & PORTS_SUSP) ? "Suspend " : "Not Suspend",
+ (tmp_reg & PORTS_OCC) ? "Detected" : "No",
+ (tmp_reg & PORTS_PEC) ? "Changed" : "Not Changed",
+ (tmp_reg & PORTS_PE) ? "Enable" : "Not Correct",
+ (tmp_reg & PORTS_CCS) ? "Attached" : "Not Attached");
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->devlc);
+ t = scnprintf(next, size,
+ "Device LPM Control Reg:\n"
+ "Parallel Transceiver : %d\n"
+ "Serial Transceiver : %d\n"
+ "Port Speed: %s\n"
+ "Port Force Full Speed Connenct: %s\n"
+ "PHY Low Power Suspend Clock Disable: %s\n"
+ "BmAttributes: %d\n\n",
+ LPM_PTS(tmp_reg),
+ (tmp_reg & LPM_STS) ? 1 : 0,
+ ({
+ char *s;
+ switch (LPM_PSPD(tmp_reg)) {
+ case LPM_SPEED_FULL:
+ s = "Full Speed"; break;
+ case LPM_SPEED_LOW:
+ s = "Low Speed"; break;
+ case LPM_SPEED_HIGH:
+ s = "High Speed"; break;
+ default:
+ s = "Unknown Speed"; break;
+ }
+ s;
+ }),
+ (tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
+ (tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
+ LPM_BA(tmp_reg));
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->usbmode);
+ t = scnprintf(next, size,
+ "USB Mode Reg:\n"
+ "Controller Mode is : %s\n\n", ({
+ char *s;
+ switch (MODE_CM(tmp_reg)) {
+ case MODE_IDLE:
+ s = "Idle"; break;
+ case MODE_DEVICE:
+ s = "Device Controller"; break;
+ case MODE_HOST:
+ s = "Host Controller"; break;
+ default:
+ s = "None"; break;
+ }
+ s;
+ }));
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->endptsetupstat);
+ t = scnprintf(next, size,
+ "Endpoint Setup Status Reg:\n"
+ "SETUP on ep 0x%04x\n\n",
+ tmp_reg & SETUPSTAT_MASK);
+ size -= t;
+ next += t;
+
+ for (i = 0; i < dev->ep_max / 2; i++) {
+ tmp_reg = readl(&dev->op_regs->endptctrl[i]);
+ t = scnprintf(next, size, "EP Ctrl Reg [%d]: 0x%08x\n",
+ i, tmp_reg);
+ size -= t;
+ next += t;
+ }
+ tmp_reg = readl(&dev->op_regs->endptprime);
+ t = scnprintf(next, size, "EP Prime Reg: 0x%08x\n\n", tmp_reg);
+ size -= t;
+ next += t;
+
+ /* langwell_udc, langwell_ep, langwell_request structure information */
+ ep = &dev->ep[0];
+ t = scnprintf(next, size, "%s MaxPacketSize: 0x%x, ep_num: %d\n",
+ ep->ep.name, ep->ep.maxpacket, ep->ep_num);
+ size -= t;
+ next += t;
+
+ if (list_empty(&ep->queue)) {
+ t = scnprintf(next, size, "its req queue is empty\n\n");
+ size -= t;
+ next += t;
+ } else {
+ list_for_each_entry(req, &ep->queue, queue) {
+ t = scnprintf(next, size,
+ "req %p actual 0x%x length 0x%x buf %p\n",
+ &req->req, req->req.actual,
+ req->req.length, req->req.buf);
+ size -= t;
+ next += t;
+ }
+ }
+ /* other gadget->eplist ep */
+ list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
+ if (ep->desc) {
+ t = scnprintf(next, size,
+ "\n%s MaxPacketSize: 0x%x, "
+ "ep_num: %d\n",
+ ep->ep.name, ep->ep.maxpacket,
+ ep->ep_num);
+ size -= t;
+ next += t;
+
+ if (list_empty(&ep->queue)) {
+ t = scnprintf(next, size,
+ "its req queue is empty\n\n");
+ size -= t;
+ next += t;
+ } else {
+ list_for_each_entry(req, &ep->queue, queue) {
+ t = scnprintf(next, size,
+ "req %p actual 0x%x length "
+ "0x%x buf %p\n",
+ &req->req, req->req.actual,
+ req->req.length, req->req.buf);
+ size -= t;
+ next += t;
+ }
+ }
+ }
+ }
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+ return PAGE_SIZE - size;
+}
+static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * when a driver is successfully registered, it will receive
+ * control requests including set_configuration(), which enables
+ * non-control requests. then usb traffic follows until a
+ * disconnect is reported. then a host may connect again, or
+ * the driver might get unbound.
+ */
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ struct langwell_udc *dev = the_controller;
+ unsigned long flags;
+ int retval;
+
+ if (!dev)
+ return -ENODEV;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ if (dev->driver)
+ return -EBUSY;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* hook up the driver ... */
+ driver->driver.bus = NULL;
+ dev->driver = driver;
+ dev->gadget.dev.driver = &driver->driver;
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ retval = driver->bind(&dev->gadget);
+ if (retval) {
+ DBG(dev, "bind to driver %s --> %d\n",
+ driver->driver.name, retval);
+ dev->driver = NULL;
+ dev->gadget.dev.driver = NULL;
+ return retval;
+ }
+
+ retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
+ if (retval)
+ goto err_unbind;
+
+ dev->usb_state = USB_STATE_ATTACHED;
+ dev->ep0_state = WAIT_FOR_SETUP;
+ dev->ep0_dir = USB_DIR_OUT;
+
+ /* enable interrupt and set controller to run state */
+ if (dev->got_irq)
+ langwell_udc_start(dev);
+
+ VDBG(dev, "After langwell_udc_start(), print all registers:\n");
+#ifdef VERBOSE
+ print_all_registers(dev);
+#endif
+
+ INFO(dev, "register driver: %s\n", driver->driver.name);
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+
+err_unbind:
+ driver->unbind(&dev->gadget);
+ dev->gadget.dev.driver = NULL;
+ dev->driver = NULL;
+
+ DBG(dev, "<--- %s()\n", __func__);
+ return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+
+/* unregister gadget driver */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct langwell_udc *dev = the_controller;
+ unsigned long flags;
+
+ if (!dev)
+ return -ENODEV;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ if (unlikely(!driver || !driver->bind || !driver->unbind))
+ return -EINVAL;
+
+ /* unbind OTG transceiver */
+ if (dev->transceiver)
+ (void)otg_set_peripheral(dev->transceiver, 0);
+
+ /* disable interrupt and set controller to stop state */
+ langwell_udc_stop(dev);
+
+ dev->usb_state = USB_STATE_ATTACHED;
+ dev->ep0_state = WAIT_FOR_SETUP;
+ dev->ep0_dir = USB_DIR_OUT;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* stop all usb activities */
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+ stop_activity(dev, driver);
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ /* unbind gadget driver */
+ driver->unbind(&dev->gadget);
+ dev->gadget.dev.driver = NULL;
+ dev->driver = NULL;
+
+ device_remove_file(&dev->pdev->dev, &dev_attr_function);
+
+ INFO(dev, "unregistered driver '%s'\n", driver->driver.name);
+ DBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * setup tripwire is used as a semaphore to ensure that the setup data
+ * payload is extracted from a dQH without being corrupted
+ */
+static void setup_tripwire(struct langwell_udc *dev)
+{
+ u32 usbcmd,
+ endptsetupstat;
+ unsigned long timeout;
+ struct langwell_dqh *dqh;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* ep0 OUT dQH */
+ dqh = &dev->ep_dqh[EP_DIR_OUT];
+
+ /* Write-Clear endptsetupstat */
+ endptsetupstat = readl(&dev->op_regs->endptsetupstat);
+ writel(endptsetupstat, &dev->op_regs->endptsetupstat);
+
+ /* wait until endptsetupstat is cleared */
+ timeout = jiffies + SETUPSTAT_TIMEOUT;
+ while (readl(&dev->op_regs->endptsetupstat)) {
+ if (time_after(jiffies, timeout)) {
+ ERROR(dev, "setup_tripwire timeout\n");
+ break;
+ }
+ cpu_relax();
+ }
+
+ /* while a hazard exists when setup packet arrives */
+ do {
+ /* set setup tripwire bit */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ writel(usbcmd | CMD_SUTW, &dev->op_regs->usbcmd);
+
+ /* copy the setup packet to local buffer */
+ memcpy(&dev->local_setup_buff, &dqh->dqh_setup, 8);
+ } while (!(readl(&dev->op_regs->usbcmd) & CMD_SUTW));
+
+ /* Write-Clear setup tripwire bit */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ writel(usbcmd & ~CMD_SUTW, &dev->op_regs->usbcmd);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* protocol ep0 stall, will automatically be cleared on new transaction */
+static void ep0_stall(struct langwell_udc *dev)
+{
+ u32 endptctrl;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* set TX and RX to stall */
+ endptctrl = readl(&dev->op_regs->endptctrl[0]);
+ endptctrl |= EPCTRL_TXS | EPCTRL_RXS;
+ writel(endptctrl, &dev->op_regs->endptctrl[0]);
+
+ /* update ep0 state */
+ dev->ep0_state = WAIT_FOR_SETUP;
+ dev->ep0_dir = USB_DIR_OUT;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* PRIME a status phase for ep0 */
+static int prime_status_phase(struct langwell_udc *dev, int dir)
+{
+ struct langwell_request *req;
+ struct langwell_ep *ep;
+ int status = 0;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (dir == EP_DIR_IN)
+ dev->ep0_dir = USB_DIR_IN;
+ else
+ dev->ep0_dir = USB_DIR_OUT;
+
+ ep = &dev->ep[0];
+ dev->ep0_state = WAIT_FOR_OUT_STATUS;
+
+ req = dev->status_req;
+
+ req->ep = ep;
+ req->req.length = 0;
+ req->req.status = -EINPROGRESS;
+ req->req.actual = 0;
+ req->req.complete = NULL;
+ req->dtd_count = 0;
+
+ if (!req_to_dtd(req))
+ status = queue_dtd(ep, req);
+ else
+ return -ENOMEM;
+
+ if (status)
+ ERROR(dev, "can't queue ep0 status request\n");
+
+ list_add_tail(&req->queue, &ep->queue);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return status;
+}
+
+
+/* SET_ADDRESS request routine */
+static void set_address(struct langwell_udc *dev, u16 value,
+ u16 index, u16 length)
+{
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* save the new address to device struct */
+ dev->dev_addr = (u8) value;
+ VDBG(dev, "dev->dev_addr = %d\n", dev->dev_addr);
+
+ /* update usb state */
+ dev->usb_state = USB_STATE_ADDRESS;
+
+ /* STATUS phase */
+ if (prime_status_phase(dev, EP_DIR_IN))
+ ep0_stall(dev);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* return endpoint by windex */
+static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev,
+ u16 wIndex)
+{
+ struct langwell_ep *ep;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
+ return &dev->ep[0];
+
+ list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
+ u8 bEndpointAddress;
+ if (!ep->desc)
+ continue;
+
+ bEndpointAddress = ep->desc->bEndpointAddress;
+ if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
+ continue;
+
+ if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
+ == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
+ return ep;
+ }
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return NULL;
+}
+
+
+/* return whether endpoint is stalled, 0: not stalled; 1: stalled */
+static int ep_is_stall(struct langwell_ep *ep)
+{
+ struct langwell_udc *dev = ep->dev;
+ u32 endptctrl;
+ int retval;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ endptctrl = readl(&dev->op_regs->endptctrl[ep->ep_num]);
+ if (is_in(ep))
+ retval = endptctrl & EPCTRL_TXS ? 1 : 0;
+ else
+ retval = endptctrl & EPCTRL_RXS ? 1 : 0;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return retval;
+}
+
+
+/* GET_STATUS request routine */
+static void get_status(struct langwell_udc *dev, u8 request_type, u16 value,
+ u16 index, u16 length)
+{
+ struct langwell_request *req;
+ struct langwell_ep *ep;
+ u16 status_data = 0; /* 16 bits cpu view status data */
+ int status = 0;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ ep = &dev->ep[0];
+
+ if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
+ /* get device status */
+ status_data = 1 << USB_DEVICE_SELF_POWERED;
+ status_data |= dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+ } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
+ /* get interface status */
+ status_data = 0;
+ } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
+ /* get endpoint status */
+ struct langwell_ep *epn;
+ epn = get_ep_by_windex(dev, index);
+ /* stall if endpoint doesn't exist */
+ if (!epn)
+ goto stall;
+
+ status_data = ep_is_stall(epn) << USB_ENDPOINT_HALT;
+ }
+
+ dev->ep0_dir = USB_DIR_IN;
+
+ /* borrow the per device status_req */
+ req = dev->status_req;
+
+ /* fill in the reqest structure */
+ *((u16 *) req->req.buf) = cpu_to_le16(status_data);
+ req->ep = ep;
+ req->req.length = 2;
+ req->req.status = -EINPROGRESS;
+ req->req.actual = 0;
+ req->req.complete = NULL;
+ req->dtd_count = 0;
+
+ /* prime the data phase */
+ if (!req_to_dtd(req))
+ status = queue_dtd(ep, req);
+ else /* no mem */
+ goto stall;
+
+ if (status) {
+ ERROR(dev, "response error on GET_STATUS request\n");
+ goto stall;
+ }
+
+ list_add_tail(&req->queue, &ep->queue);
+ dev->ep0_state = DATA_STATE_XMIT;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return;
+stall:
+ ep0_stall(dev);
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* setup packet interrupt handler */
+static void handle_setup_packet(struct langwell_udc *dev,
+ struct usb_ctrlrequest *setup)
+{
+ u16 wValue = le16_to_cpu(setup->wValue);
+ u16 wIndex = le16_to_cpu(setup->wIndex);
+ u16 wLength = le16_to_cpu(setup->wLength);
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* ep0 fifo flush */
+ nuke(&dev->ep[0], -ESHUTDOWN);
+
+ DBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+ setup->bRequestType, setup->bRequest,
+ wValue, wIndex, wLength);
+
+ /* RNDIS gadget delegate */
+ if ((setup->bRequestType == 0x21) && (setup->bRequest == 0x00)) {
+ /* USB_CDC_SEND_ENCAPSULATED_COMMAND */
+ goto delegate;
+ }
+
+ /* USB_CDC_GET_ENCAPSULATED_RESPONSE */
+ if ((setup->bRequestType == 0xa1) && (setup->bRequest == 0x01)) {
+ /* USB_CDC_GET_ENCAPSULATED_RESPONSE */
+ goto delegate;
+ }
+
+ /* We process some stardard setup requests here */
+ switch (setup->bRequest) {
+ case USB_REQ_GET_STATUS:
+ DBG(dev, "SETUP: USB_REQ_GET_STATUS\n");
+ /* get status, DATA and STATUS phase */
+ if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
+ != (USB_DIR_IN | USB_TYPE_STANDARD))
+ break;
+ get_status(dev, setup->bRequestType, wValue, wIndex, wLength);
+ goto end;
+
+ case USB_REQ_SET_ADDRESS:
+ DBG(dev, "SETUP: USB_REQ_SET_ADDRESS\n");
+ /* STATUS phase */
+ if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
+ | USB_RECIP_DEVICE))
+ break;
+ set_address(dev, wValue, wIndex, wLength);
+ goto end;
+
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ /* STATUS phase */
+ {
+ int rc = -EOPNOTSUPP;
+ if (setup->bRequest == USB_REQ_SET_FEATURE)
+ DBG(dev, "SETUP: USB_REQ_SET_FEATURE\n");
+ else if (setup->bRequest == USB_REQ_CLEAR_FEATURE)
+ DBG(dev, "SETUP: USB_REQ_CLEAR_FEATURE\n");
+
+ if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
+ == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
+ struct langwell_ep *epn;
+ epn = get_ep_by_windex(dev, wIndex);
+ /* stall if endpoint doesn't exist */
+ if (!epn) {
+ ep0_stall(dev);
+ goto end;
+ }
+
+ if (wValue != 0 || wLength != 0
+ || epn->ep_num > dev->ep_max)
+ break;
+
+ spin_unlock(&dev->lock);
+ rc = langwell_ep_set_halt(&epn->ep,
+ (setup->bRequest == USB_REQ_SET_FEATURE)
+ ? 1 : 0);
+ spin_lock(&dev->lock);
+
+ } else if ((setup->bRequestType & (USB_RECIP_MASK
+ | USB_TYPE_MASK)) == (USB_RECIP_DEVICE
+ | USB_TYPE_STANDARD)) {
+ if (!gadget_is_otg(&dev->gadget))
+ break;
+ else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
+ dev->gadget.b_hnp_enable = 1;
+#ifdef OTG_TRANSCEIVER
+ if (!dev->lotg->otg.default_a)
+ dev->lotg->hsm.b_hnp_enable = 1;
+#endif
+ } else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
+ dev->gadget.a_hnp_support = 1;
+ else if (setup->bRequest ==
+ USB_DEVICE_A_ALT_HNP_SUPPORT)
+ dev->gadget.a_alt_hnp_support = 1;
+ else
+ break;
+ rc = 0;
+ } else
+ break;
+
+ if (rc == 0) {
+ if (prime_status_phase(dev, EP_DIR_IN))
+ ep0_stall(dev);
+ }
+ goto end;
+ }
+
+ case USB_REQ_GET_DESCRIPTOR:
+ DBG(dev, "SETUP: USB_REQ_GET_DESCRIPTOR\n");
+ goto delegate;
+
+ case USB_REQ_SET_DESCRIPTOR:
+ DBG(dev, "SETUP: USB_REQ_SET_DESCRIPTOR unsupported\n");
+ goto delegate;
+
+ case USB_REQ_GET_CONFIGURATION:
+ DBG(dev, "SETUP: USB_REQ_GET_CONFIGURATION\n");
+ goto delegate;
+
+ case USB_REQ_SET_CONFIGURATION:
+ DBG(dev, "SETUP: USB_REQ_SET_CONFIGURATION\n");
+ goto delegate;
+
+ case USB_REQ_GET_INTERFACE:
+ DBG(dev, "SETUP: USB_REQ_GET_INTERFACE\n");
+ goto delegate;
+
+ case USB_REQ_SET_INTERFACE:
+ DBG(dev, "SETUP: USB_REQ_SET_INTERFACE\n");
+ goto delegate;
+
+ case USB_REQ_SYNCH_FRAME:
+ DBG(dev, "SETUP: USB_REQ_SYNCH_FRAME unsupported\n");
+ goto delegate;
+
+ default:
+ /* delegate USB standard requests to the gadget driver */
+ goto delegate;
+delegate:
+ /* USB requests handled by gadget */
+ if (wLength) {
+ /* DATA phase from gadget, STATUS phase from udc */
+ dev->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+ ? USB_DIR_IN : USB_DIR_OUT;
+ VDBG(dev, "dev->ep0_dir = 0x%x, wLength = %d\n",
+ dev->ep0_dir, wLength);
+ spin_unlock(&dev->lock);
+ if (dev->driver->setup(&dev->gadget,
+ &dev->local_setup_buff) < 0)
+ ep0_stall(dev);
+ spin_lock(&dev->lock);
+ dev->ep0_state = (setup->bRequestType & USB_DIR_IN)
+ ? DATA_STATE_XMIT : DATA_STATE_RECV;
+ } else {
+ /* no DATA phase, IN STATUS phase from gadget */
+ dev->ep0_dir = USB_DIR_IN;
+ VDBG(dev, "dev->ep0_dir = 0x%x, wLength = %d\n",
+ dev->ep0_dir, wLength);
+ spin_unlock(&dev->lock);
+ if (dev->driver->setup(&dev->gadget,
+ &dev->local_setup_buff) < 0)
+ ep0_stall(dev);
+ spin_lock(&dev->lock);
+ dev->ep0_state = WAIT_FOR_OUT_STATUS;
+ }
+ break;
+ }
+end:
+ VDBG(dev, "<--- %s()\n", __func__);
+ return;
+}
+
+
+/* transfer completion, process endpoint request and free the completed dTDs
+ * for this request
+ */
+static int process_ep_req(struct langwell_udc *dev, int index,
+ struct langwell_request *curr_req)
+{
+ struct langwell_dtd *curr_dtd;
+ struct langwell_dqh *curr_dqh;
+ int td_complete, actual, remaining_length;
+ int i, dir;
+ u8 dtd_status = 0;
+ int retval = 0;
+
+ curr_dqh = &dev->ep_dqh[index];
+ dir = index % 2;
+
+ curr_dtd = curr_req->head;
+ td_complete = 0;
+ actual = curr_req->req.length;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ for (i = 0; i < curr_req->dtd_count; i++) {
+ remaining_length = le16_to_cpu(curr_dtd->dtd_total);
+ actual -= remaining_length;
+
+ /* command execution states by dTD */
+ dtd_status = curr_dtd->dtd_status;
+
+ if (!dtd_status) {
+ /* transfers completed successfully */
+ if (!remaining_length) {
+ td_complete++;
+ VDBG(dev, "dTD transmitted successfully\n");
+ } else {
+ if (dir) {
+ VDBG(dev, "TX dTD remains data\n");
+ retval = -EPROTO;
+ break;
+
+ } else {
+ td_complete++;
+ break;
+ }
+ }
+ } else {
+ /* transfers completed with errors */
+ if (dtd_status & DTD_STS_ACTIVE) {
+ DBG(dev, "request not completed\n");
+ retval = 1;
+ return retval;
+ } else if (dtd_status & DTD_STS_HALTED) {
+ ERROR(dev, "dTD error %08x dQH[%d]\n",
+ dtd_status, index);
+ /* clear the errors and halt condition */
+ curr_dqh->dtd_status = 0;
+ retval = -EPIPE;
+ break;
+ } else if (dtd_status & DTD_STS_DBE) {
+ DBG(dev, "data buffer (overflow) error\n");
+ retval = -EPROTO;
+ break;
+ } else if (dtd_status & DTD_STS_TRE) {
+ DBG(dev, "transaction(ISO) error\n");
+ retval = -EILSEQ;
+ break;
+ } else
+ ERROR(dev, "unknown error (0x%x)!\n",
+ dtd_status);
+ }
+
+ if (i != curr_req->dtd_count - 1)
+ curr_dtd = (struct langwell_dtd *)
+ curr_dtd->next_dtd_virt;
+ }
+
+ if (retval)
+ return retval;
+
+ curr_req->req.actual = actual;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* complete DATA or STATUS phase of ep0 prime status phase if needed */
+static void ep0_req_complete(struct langwell_udc *dev,
+ struct langwell_ep *ep0, struct langwell_request *req)
+{
+ u32 new_addr;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (dev->usb_state == USB_STATE_ADDRESS) {
+ /* set the new address */
+ new_addr = (u32)dev->dev_addr;
+ writel(new_addr << USBADR_SHIFT, &dev->op_regs->deviceaddr);
+
+ new_addr = USBADR(readl(&dev->op_regs->deviceaddr));
+ VDBG(dev, "new_addr = %d\n", new_addr);
+ }
+
+ done(ep0, req, 0);
+
+ switch (dev->ep0_state) {
+ case DATA_STATE_XMIT:
+ /* receive status phase */
+ if (prime_status_phase(dev, EP_DIR_OUT))
+ ep0_stall(dev);
+ break;
+ case DATA_STATE_RECV:
+ /* send status phase */
+ if (prime_status_phase(dev, EP_DIR_IN))
+ ep0_stall(dev);
+ break;
+ case WAIT_FOR_OUT_STATUS:
+ dev->ep0_state = WAIT_FOR_SETUP;
+ break;
+ case WAIT_FOR_SETUP:
+ ERROR(dev, "unexpect ep0 packets\n");
+ break;
+ default:
+ ep0_stall(dev);
+ break;
+ }
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* USB transfer completion interrupt */
+static void handle_trans_complete(struct langwell_udc *dev)
+{
+ u32 complete_bits;
+ int i, ep_num, dir, bit_mask, status;
+ struct langwell_ep *epn;
+ struct langwell_request *curr_req, *temp_req;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ complete_bits = readl(&dev->op_regs->endptcomplete);
+ VDBG(dev, "endptcomplete register: 0x%08x\n", complete_bits);
+
+ /* Write-Clear the bits in endptcomplete register */
+ writel(complete_bits, &dev->op_regs->endptcomplete);
+
+ if (!complete_bits) {
+ DBG(dev, "complete_bits = 0\n");
+ goto done;
+ }
+
+ for (i = 0; i < dev->ep_max; i++) {
+ ep_num = i / 2;
+ dir = i % 2;
+
+ bit_mask = 1 << (ep_num + 16 * dir);
+
+ if (!(complete_bits & bit_mask))
+ continue;
+
+ /* ep0 */
+ if (i == 1)
+ epn = &dev->ep[0];
+ else
+ epn = &dev->ep[i];
+
+ if (epn->name == NULL) {
+ WARNING(dev, "invalid endpoint\n");
+ continue;
+ }
+
+ if (i < 2)
+ /* ep0 in and out */
+ DBG(dev, "%s-%s transfer completed\n",
+ epn->name,
+ is_in(epn) ? "in" : "out");
+ else
+ DBG(dev, "%s transfer completed\n", epn->name);
+
+ /* process the req queue until an uncomplete request */
+ list_for_each_entry_safe(curr_req, temp_req,
+ &epn->queue, queue) {
+ status = process_ep_req(dev, i, curr_req);
+ VDBG(dev, "%s req status: %d\n", epn->name, status);
+
+ if (status)
+ break;
+
+ /* write back status to req */
+ curr_req->req.status = status;
+
+ /* ep0 request completion */
+ if (ep_num == 0) {
+ ep0_req_complete(dev, epn, curr_req);
+ break;
+ } else {
+ done(epn, curr_req, status);
+ }
+ }
+ }
+done:
+ VDBG(dev, "<--- %s()\n", __func__);
+ return;
+}
+
+
+/* port change detect interrupt handler */
+static void handle_port_change(struct langwell_udc *dev)
+{
+ u32 portsc1, devlc;
+ u32 speed;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (dev->bus_reset)
+ dev->bus_reset = 0;
+
+ portsc1 = readl(&dev->op_regs->portsc1);
+ devlc = readl(&dev->op_regs->devlc);
+ VDBG(dev, "portsc1 = 0x%08x, devlc = 0x%08x\n",
+ portsc1, devlc);
+
+ /* bus reset is finished */
+ if (!(portsc1 & PORTS_PR)) {
+ /* get the speed */
+ speed = LPM_PSPD(devlc);
+ switch (speed) {
+ case LPM_SPEED_HIGH:
+ dev->gadget.speed = USB_SPEED_HIGH;
+ break;
+ case LPM_SPEED_FULL:
+ dev->gadget.speed = USB_SPEED_FULL;
+ break;
+ case LPM_SPEED_LOW:
+ dev->gadget.speed = USB_SPEED_LOW;
+ break;
+ default:
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+ break;
+ }
+ VDBG(dev, "speed = %d, dev->gadget.speed = %d\n",
+ speed, dev->gadget.speed);
+ }
+
+ /* LPM L0 to L1 */
+ if (dev->lpm && dev->lpm_state == LPM_L0)
+ if (portsc1 & PORTS_SUSP && portsc1 & PORTS_SLP) {
+ INFO(dev, "LPM L0 to L1\n");
+ dev->lpm_state = LPM_L1;
+ }
+
+ /* LPM L1 to L0, force resume or remote wakeup finished */
+ if (dev->lpm && dev->lpm_state == LPM_L1)
+ if (!(portsc1 & PORTS_SUSP)) {
+ if (portsc1 & PORTS_SLP)
+ INFO(dev, "LPM L1 to L0, force resume\n");
+ else
+ INFO(dev, "LPM L1 to L0, remote wakeup\n");
+
+ dev->lpm_state = LPM_L0;
+ }
+
+ /* update USB state */
+ if (!dev->resume_state)
+ dev->usb_state = USB_STATE_DEFAULT;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* USB reset interrupt handler */
+static void handle_usb_reset(struct langwell_udc *dev)
+{
+ u32 deviceaddr,
+ endptsetupstat,
+ endptcomplete;
+ unsigned long timeout;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* Write-Clear the device address */
+ deviceaddr = readl(&dev->op_regs->deviceaddr);
+ writel(deviceaddr & ~USBADR_MASK, &dev->op_regs->deviceaddr);
+
+ dev->dev_addr = 0;
+
+ /* clear usb state */
+ dev->resume_state = 0;
+
+ /* LPM L1 to L0, reset */
+ if (dev->lpm)
+ dev->lpm_state = LPM_L0;
+
+ dev->ep0_dir = USB_DIR_OUT;
+ dev->ep0_state = WAIT_FOR_SETUP;
+ dev->remote_wakeup = 0; /* default to 0 on reset */
+ dev->gadget.b_hnp_enable = 0;
+ dev->gadget.a_hnp_support = 0;
+ dev->gadget.a_alt_hnp_support = 0;
+
+ /* Write-Clear all the setup token semaphores */
+ endptsetupstat = readl(&dev->op_regs->endptsetupstat);
+ writel(endptsetupstat, &dev->op_regs->endptsetupstat);
+
+ /* Write-Clear all the endpoint complete status bits */
+ endptcomplete = readl(&dev->op_regs->endptcomplete);
+ writel(endptcomplete, &dev->op_regs->endptcomplete);
+
+ /* wait until all endptprime bits cleared */
+ timeout = jiffies + PRIME_TIMEOUT;
+ while (readl(&dev->op_regs->endptprime)) {
+ if (time_after(jiffies, timeout)) {
+ ERROR(dev, "USB reset timeout\n");
+ break;
+ }
+ cpu_relax();
+ }
+
+ /* write 1s to endptflush register to clear any primed buffers */
+ writel((u32) ~0, &dev->op_regs->endptflush);
+
+ if (readl(&dev->op_regs->portsc1) & PORTS_PR) {
+ VDBG(dev, "USB bus reset\n");
+ /* bus is reseting */
+ dev->bus_reset = 1;
+
+ /* reset all the queues, stop all USB activities */
+ stop_activity(dev, dev->driver);
+ dev->usb_state = USB_STATE_DEFAULT;
+ } else {
+ VDBG(dev, "device controller reset\n");
+ /* controller reset */
+ langwell_udc_reset(dev);
+
+ /* reset all the queues, stop all USB activities */
+ stop_activity(dev, dev->driver);
+
+ /* reset ep0 dQH and endptctrl */
+ ep0_reset(dev);
+
+ /* enable interrupt and set controller to run state */
+ langwell_udc_start(dev);
+
+ dev->usb_state = USB_STATE_ATTACHED;
+ }
+
+#ifdef OTG_TRANSCEIVER
+ /* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */
+ if (!dev->lotg->otg.default_a)
+ dev->lotg->hsm.b_hnp_enable = 0;
+#endif
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* USB bus suspend/resume interrupt */
+static void handle_bus_suspend(struct langwell_udc *dev)
+{
+ u32 devlc;
+ DBG(dev, "---> %s()\n", __func__);
+
+ dev->resume_state = dev->usb_state;
+ dev->usb_state = USB_STATE_SUSPENDED;
+
+#ifdef OTG_TRANSCEIVER
+ if (dev->lotg->otg.default_a) {
+ if (dev->lotg->hsm.b_bus_suspend_vld == 1) {
+ dev->lotg->hsm.b_bus_suspend = 1;
+ /* notify transceiver the state changes */
+ if (spin_trylock(&dev->lotg->wq_lock)) {
+ langwell_update_transceiver();
+ spin_unlock(&dev->lotg->wq_lock);
+ }
+ }
+ dev->lotg->hsm.b_bus_suspend_vld++;
+ } else {
+ if (!dev->lotg->hsm.a_bus_suspend) {
+ dev->lotg->hsm.a_bus_suspend = 1;
+ /* notify transceiver the state changes */
+ if (spin_trylock(&dev->lotg->wq_lock)) {
+ langwell_update_transceiver();
+ spin_unlock(&dev->lotg->wq_lock);
+ }
+ }
+ }
+#endif
+
+ /* report suspend to the driver */
+ if (dev->driver) {
+ if (dev->driver->suspend) {
+ spin_unlock(&dev->lock);
+ dev->driver->suspend(&dev->gadget);
+ spin_lock(&dev->lock);
+ DBG(dev, "suspend %s\n", dev->driver->driver.name);
+ }
+ }
+
+ /* enter PHY low power suspend */
+ devlc = readl(&dev->op_regs->devlc);
+ VDBG(dev, "devlc = 0x%08x\n", devlc);
+ devlc |= LPM_PHCD;
+ writel(devlc, &dev->op_regs->devlc);
+
+ DBG(dev, "<--- %s()\n", __func__);
+}
+
+
+static void handle_bus_resume(struct langwell_udc *dev)
+{
+ u32 devlc;
+ DBG(dev, "---> %s()\n", __func__);
+
+ dev->usb_state = dev->resume_state;
+ dev->resume_state = 0;
+
+ /* exit PHY low power suspend */
+ devlc = readl(&dev->op_regs->devlc);
+ VDBG(dev, "devlc = 0x%08x\n", devlc);
+ devlc &= ~LPM_PHCD;
+ writel(devlc, &dev->op_regs->devlc);
+
+#ifdef OTG_TRANSCEIVER
+ if (dev->lotg->otg.default_a == 0)
+ dev->lotg->hsm.a_bus_suspend = 0;
+#endif
+
+ /* report resume to the driver */
+ if (dev->driver) {
+ if (dev->driver->resume) {
+ spin_unlock(&dev->lock);
+ dev->driver->resume(&dev->gadget);
+ spin_lock(&dev->lock);
+ DBG(dev, "resume %s\n", dev->driver->driver.name);
+ }
+ }
+
+ DBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* USB device controller interrupt handler */
+static irqreturn_t langwell_irq(int irq, void *_dev)
+{
+ struct langwell_udc *dev = _dev;
+ u32 usbsts,
+ usbintr,
+ irq_sts,
+ portsc1;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (dev->stopped) {
+ VDBG(dev, "handle IRQ_NONE\n");
+ VDBG(dev, "<--- %s()\n", __func__);
+ return IRQ_NONE;
+ }
+
+ spin_lock(&dev->lock);
+
+ /* USB status */
+ usbsts = readl(&dev->op_regs->usbsts);
+
+ /* USB interrupt enable */
+ usbintr = readl(&dev->op_regs->usbintr);
+
+ irq_sts = usbsts & usbintr;
+ VDBG(dev, "usbsts = 0x%08x, usbintr = 0x%08x, irq_sts = 0x%08x\n",
+ usbsts, usbintr, irq_sts);
+
+ if (!irq_sts) {
+ VDBG(dev, "handle IRQ_NONE\n");
+ VDBG(dev, "<--- %s()\n", __func__);
+ spin_unlock(&dev->lock);
+ return IRQ_NONE;
+ }
+
+ /* Write-Clear interrupt status bits */
+ writel(irq_sts, &dev->op_regs->usbsts);
+
+ /* resume from suspend */
+ portsc1 = readl(&dev->op_regs->portsc1);
+ if (dev->usb_state == USB_STATE_SUSPENDED)
+ if (!(portsc1 & PORTS_SUSP))
+ handle_bus_resume(dev);
+
+ /* USB interrupt */
+ if (irq_sts & STS_UI) {
+ VDBG(dev, "USB interrupt\n");
+
+ /* setup packet received from ep0 */
+ if (readl(&dev->op_regs->endptsetupstat)
+ & EP0SETUPSTAT_MASK) {
+ VDBG(dev, "USB SETUP packet received interrupt\n");
+ /* setup tripwire semaphone */
+ setup_tripwire(dev);
+ handle_setup_packet(dev, &dev->local_setup_buff);
+ }
+
+ /* USB transfer completion */
+ if (readl(&dev->op_regs->endptcomplete)) {
+ VDBG(dev, "USB transfer completion interrupt\n");
+ handle_trans_complete(dev);
+ }
+ }
+
+ /* SOF received interrupt (for ISO transfer) */
+ if (irq_sts & STS_SRI) {
+ /* FIXME */
+ /* VDBG(dev, "SOF received interrupt\n"); */
+ }
+
+ /* port change detect interrupt */
+ if (irq_sts & STS_PCI) {
+ VDBG(dev, "port change detect interrupt\n");
+ handle_port_change(dev);
+ }
+
+ /* suspend interrrupt */
+ if (irq_sts & STS_SLI) {
+ VDBG(dev, "suspend interrupt\n");
+ handle_bus_suspend(dev);
+ }
+
+ /* USB reset interrupt */
+ if (irq_sts & STS_URI) {
+ VDBG(dev, "USB reset interrupt\n");
+ handle_usb_reset(dev);
+ }
+
+ /* USB error or system error interrupt */
+ if (irq_sts & (STS_UEI | STS_SEI)) {
+ /* FIXME */
+ WARNING(dev, "error IRQ, irq_sts: %x\n", irq_sts);
+ }
+
+ spin_unlock(&dev->lock);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return IRQ_HANDLED;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* release device structure */
+static void gadget_release(struct device *_dev)
+{
+ struct langwell_udc *dev = the_controller;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ complete(dev->done);
+
+ DBG(dev, "<--- %s()\n", __func__);
+ kfree(dev);
+}
+
+
+/* tear down the binding between this driver and the pci device */
+static void langwell_udc_remove(struct pci_dev *pdev)
+{
+ struct langwell_udc *dev = the_controller;
+
+ DECLARE_COMPLETION(done);
+
+ BUG_ON(dev->driver);
+ DBG(dev, "---> %s()\n", __func__);
+
+ dev->done = &done;
+
+ /* free memory allocated in probe */
+ if (dev->dtd_pool)
+ dma_pool_destroy(dev->dtd_pool);
+
+ if (dev->status_req) {
+ kfree(dev->status_req->req.buf);
+ kfree(dev->status_req);
+ }
+
+ if (dev->ep_dqh)
+ dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
+ dev->ep_dqh, dev->ep_dqh_dma);
+
+ kfree(dev->ep);
+
+ /* diable IRQ handler */
+ if (dev->got_irq)
+ free_irq(pdev->irq, dev);
+
+#ifndef OTG_TRANSCEIVER
+ if (dev->cap_regs)
+ iounmap(dev->cap_regs);
+
+ if (dev->region)
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+ if (dev->enabled)
+ pci_disable_device(pdev);
+#else
+ if (dev->transceiver) {
+ otg_put_transceiver(dev->transceiver);
+ dev->transceiver = NULL;
+ dev->lotg = NULL;
+ }
+#endif
+
+ dev->cap_regs = NULL;
+
+ INFO(dev, "unbind\n");
+ DBG(dev, "<--- %s()\n", __func__);
+
+ device_unregister(&dev->gadget.dev);
+ device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
+
+#ifndef OTG_TRANSCEIVER
+ pci_set_drvdata(pdev, NULL);
+#endif
+
+ /* free dev, wait for the release() finished */
+ wait_for_completion(&done);
+
+ the_controller = NULL;
+}
+
+
+/*
+ * wrap this driver around the specified device, but
+ * don't respond over USB until a gadget driver binds to us.
+ */
+static int langwell_udc_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct langwell_udc *dev;
+#ifndef OTG_TRANSCEIVER
+ unsigned long resource, len;
+#endif
+ void __iomem *base = NULL;
+ size_t size;
+ int retval;
+
+ if (the_controller) {
+ dev_warn(&pdev->dev, "ignoring\n");
+ return -EBUSY;
+ }
+
+ /* alloc, and start init */
+ dev = kzalloc(sizeof *dev, GFP_KERNEL);
+ if (dev == NULL) {
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ /* initialize device spinlock */
+ spin_lock_init(&dev->lock);
+
+ dev->pdev = pdev;
+ DBG(dev, "---> %s()\n", __func__);
+
+#ifdef OTG_TRANSCEIVER
+ /* PCI device is already enabled by otg_transceiver driver */
+ dev->enabled = 1;
+
+ /* mem region and register base */
+ dev->region = 1;
+ dev->transceiver = otg_get_transceiver();
+ dev->lotg = otg_to_langwell(dev->transceiver);
+ base = dev->lotg->regs;
+#else
+ pci_set_drvdata(pdev, dev);
+
+ /* now all the pci goodies ... */
+ if (pci_enable_device(pdev) < 0) {
+ retval = -ENODEV;
+ goto error;
+ }
+ dev->enabled = 1;
+
+ /* control register: BAR 0 */
+ resource = pci_resource_start(pdev, 0);
+ len = pci_resource_len(pdev, 0);
+ if (!request_mem_region(resource, len, driver_name)) {
+ ERROR(dev, "controller already in use\n");
+ retval = -EBUSY;
+ goto error;
+ }
+ dev->region = 1;
+
+ base = ioremap_nocache(resource, len);
+#endif
+ if (base == NULL) {
+ ERROR(dev, "can't map memory\n");
+ retval = -EFAULT;
+ goto error;
+ }
+
+ dev->cap_regs = (struct langwell_cap_regs __iomem *) base;
+ VDBG(dev, "dev->cap_regs: %p\n", dev->cap_regs);
+ dev->op_regs = (struct langwell_op_regs __iomem *)
+ (base + OP_REG_OFFSET);
+ VDBG(dev, "dev->op_regs: %p\n", dev->op_regs);
+
+ /* irq setup after old hardware is cleaned up */
+ if (!pdev->irq) {
+ ERROR(dev, "No IRQ. Check PCI setup!\n");
+ retval = -ENODEV;
+ goto error;
+ }
+
+#ifndef OTG_TRANSCEIVER
+ INFO(dev, "irq %d, io mem: 0x%08lx, len: 0x%08lx, pci mem 0x%p\n",
+ pdev->irq, resource, len, base);
+ /* enables bus-mastering for device dev */
+ pci_set_master(pdev);
+
+ if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
+ driver_name, dev) != 0) {
+ ERROR(dev, "request interrupt %d failed\n", pdev->irq);
+ retval = -EBUSY;
+ goto error;
+ }
+ dev->got_irq = 1;
+#endif
+
+ /* set stopped bit */
+ dev->stopped = 1;
+
+ /* capabilities and endpoint number */
+ dev->lpm = (readl(&dev->cap_regs->hccparams) & HCC_LEN) ? 1 : 0;
+ dev->dciversion = readw(&dev->cap_regs->dciversion);
+ dev->devcap = (readl(&dev->cap_regs->dccparams) & DEVCAP) ? 1 : 0;
+ VDBG(dev, "dev->lpm: %d\n", dev->lpm);
+ VDBG(dev, "dev->dciversion: 0x%04x\n", dev->dciversion);
+ VDBG(dev, "dccparams: 0x%08x\n", readl(&dev->cap_regs->dccparams));
+ VDBG(dev, "dev->devcap: %d\n", dev->devcap);
+ if (!dev->devcap) {
+ ERROR(dev, "can't support device mode\n");
+ retval = -ENODEV;
+ goto error;
+ }
+
+ /* a pair of endpoints (out/in) for each address */
+ dev->ep_max = DEN(readl(&dev->cap_regs->dccparams)) * 2;
+ VDBG(dev, "dev->ep_max: %d\n", dev->ep_max);
+
+ /* allocate endpoints memory */
+ dev->ep = kzalloc(sizeof(struct langwell_ep) * dev->ep_max,
+ GFP_KERNEL);
+ if (!dev->ep) {
+ ERROR(dev, "allocate endpoints memory failed\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ /* allocate device dQH memory */
+ size = dev->ep_max * sizeof(struct langwell_dqh);
+ VDBG(dev, "orig size = %d\n", size);
+ if (size < DQH_ALIGNMENT)
+ size = DQH_ALIGNMENT;
+ else if ((size % DQH_ALIGNMENT) != 0) {
+ size += DQH_ALIGNMENT + 1;
+ size &= ~(DQH_ALIGNMENT - 1);
+ }
+ dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
+ &dev->ep_dqh_dma, GFP_KERNEL);
+ if (!dev->ep_dqh) {
+ ERROR(dev, "allocate dQH memory failed\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ dev->ep_dqh_size = size;
+ VDBG(dev, "ep_dqh_size = %d\n", dev->ep_dqh_size);
+
+ /* initialize ep0 status request structure */
+ dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL);
+ if (!dev->status_req) {
+ ERROR(dev, "allocate status_req memory failed\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ INIT_LIST_HEAD(&dev->status_req->queue);
+
+ /* allocate a small amount of memory to get valid address */
+ dev->status_req->req.buf = kmalloc(8, GFP_KERNEL);
+ dev->status_req->req.dma = virt_to_phys(dev->status_req->req.buf);
+
+ dev->resume_state = USB_STATE_NOTATTACHED;
+ dev->usb_state = USB_STATE_POWERED;
+ dev->ep0_dir = USB_DIR_OUT;
+ dev->remote_wakeup = 0; /* default to 0 on reset */
+
+#ifndef OTG_TRANSCEIVER
+ /* reset device controller */
+ langwell_udc_reset(dev);
+#endif
+
+ /* initialize gadget structure */
+ dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */
+ dev->gadget.ep0 = &dev->ep[0].ep; /* gadget ep0 */
+ INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */
+ dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */
+ dev->gadget.is_dualspeed = 1; /* support dual speed */
+#ifdef OTG_TRANSCEIVER
+ dev->gadget.is_otg = 1; /* support otg mode */
+#endif
+
+ /* the "gadget" abstracts/virtualizes the controller */
+ dev_set_name(&dev->gadget.dev, "gadget");
+ dev->gadget.dev.parent = &pdev->dev;
+ dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ dev->gadget.dev.release = gadget_release;
+ dev->gadget.name = driver_name; /* gadget name */
+
+ /* controller endpoints reinit */
+ eps_reinit(dev);
+
+#ifndef OTG_TRANSCEIVER
+ /* reset ep0 dQH and endptctrl */
+ ep0_reset(dev);
+#endif
+
+ /* create dTD dma_pool resource */
+ dev->dtd_pool = dma_pool_create("langwell_dtd",
+ &dev->pdev->dev,
+ sizeof(struct langwell_dtd),
+ DTD_ALIGNMENT,
+ DMA_BOUNDARY);
+
+ if (!dev->dtd_pool) {
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ /* done */
+ INFO(dev, "%s\n", driver_desc);
+ INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base);
+ INFO(dev, "Driver version: " DRIVER_VERSION "\n");
+ INFO(dev, "Support (max) %d endpoints\n", dev->ep_max);
+ INFO(dev, "Device interface version: 0x%04x\n", dev->dciversion);
+ INFO(dev, "Controller mode: %s\n", dev->devcap ? "Device" : "Host");
+ INFO(dev, "Support USB LPM: %s\n", dev->lpm ? "Yes" : "No");
+
+ VDBG(dev, "After langwell_udc_probe(), print all registers:\n");
+#ifdef VERBOSE
+ print_all_registers(dev);
+#endif
+
+ the_controller = dev;
+
+ retval = device_register(&dev->gadget.dev);
+ if (retval)
+ goto error;
+
+ retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc);
+ if (retval)
+ goto error;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+
+error:
+ if (dev) {
+ DBG(dev, "<--- %s()\n", __func__);
+ langwell_udc_remove(pdev);
+ }
+
+ return retval;
+}
+
+
+/* device controller suspend */
+static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct langwell_udc *dev = the_controller;
+ u32 devlc;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ /* disable interrupt and set controller to stop state */
+ langwell_udc_stop(dev);
+
+ /* diable IRQ handler */
+ if (dev->got_irq)
+ free_irq(pdev->irq, dev);
+ dev->got_irq = 0;
+
+
+ /* save PCI state */
+ pci_save_state(pdev);
+
+ /* set device power state */
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ /* enter PHY low power suspend */
+ devlc = readl(&dev->op_regs->devlc);
+ VDBG(dev, "devlc = 0x%08x\n", devlc);
+ devlc |= LPM_PHCD;
+ writel(devlc, &dev->op_regs->devlc);
+
+ DBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* device controller resume */
+static int langwell_udc_resume(struct pci_dev *pdev)
+{
+ struct langwell_udc *dev = the_controller;
+ u32 devlc;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ /* exit PHY low power suspend */
+ devlc = readl(&dev->op_regs->devlc);
+ VDBG(dev, "devlc = 0x%08x\n", devlc);
+ devlc &= ~LPM_PHCD;
+ writel(devlc, &dev->op_regs->devlc);
+
+ /* set device D0 power state */
+ pci_set_power_state(pdev, PCI_D0);
+
+ /* restore PCI state */
+ pci_restore_state(pdev);
+
+ /* enable IRQ handler */
+ if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED, driver_name, dev)
+ != 0) {
+ ERROR(dev, "request interrupt %d failed\n", pdev->irq);
+ return -1;
+ }
+ dev->got_irq = 1;
+
+ /* reset and start controller to run state */
+ if (dev->stopped) {
+ /* reset device controller */
+ langwell_udc_reset(dev);
+
+ /* reset ep0 dQH and endptctrl */
+ ep0_reset(dev);
+
+ /* start device if gadget is loaded */
+ if (dev->driver)
+ langwell_udc_start(dev);
+ }
+
+ /* reset USB status */
+ dev->usb_state = USB_STATE_ATTACHED;
+ dev->ep0_state = WAIT_FOR_SETUP;
+ dev->ep0_dir = USB_DIR_OUT;
+
+ DBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* pci driver shutdown */
+static void langwell_udc_shutdown(struct pci_dev *pdev)
+{
+ struct langwell_udc *dev = the_controller;
+ u32 usbmode;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ /* reset controller mode to IDLE */
+ usbmode = readl(&dev->op_regs->usbmode);
+ DBG(dev, "usbmode = 0x%08x\n", usbmode);
+ usbmode &= (~3 | MODE_IDLE);
+ writel(usbmode, &dev->op_regs->usbmode);
+
+ DBG(dev, "<--- %s()\n", __func__);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct pci_device_id pci_ids[] = { {
+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class_mask = ~0,
+ .vendor = 0x8086,
+ .device = 0x0811,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+}, { /* end: all zeroes */ }
+};
+
+
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+
+static struct pci_driver langwell_pci_driver = {
+ .name = (char *) driver_name,
+ .id_table = pci_ids,
+
+ .probe = langwell_udc_probe,
+ .remove = langwell_udc_remove,
+
+ /* device controller suspend/resume */
+ .suspend = langwell_udc_suspend,
+ .resume = langwell_udc_resume,
+
+ .shutdown = langwell_udc_shutdown,
+};
+
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Xiaochen Shen <xiaochen.shen@intel.com>");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+
+static int __init init(void)
+{
+#ifdef OTG_TRANSCEIVER
+ return langwell_register_peripheral(&langwell_pci_driver);
+#else
+ return pci_register_driver(&langwell_pci_driver);
+#endif
+}
+module_init(init);
+
+
+static void __exit cleanup(void)
+{
+#ifdef OTG_TRANSCEIVER
+ return langwell_unregister_peripheral(&langwell_pci_driver);
+#else
+ pci_unregister_driver(&langwell_pci_driver);
+#endif
+}
+module_exit(cleanup);
+
diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
new file mode 100644
index 0000000..9719934
--- /dev/null
+++ b/drivers/usb/gadget/langwell_udc.h
@@ -0,0 +1,228 @@
+/*
+ * Intel Langwell USB Device Controller driver
+ * Copyright (C) 2008-2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/usb/langwell_udc.h>
+
+#if defined(CONFIG_USB_LANGWELL_OTG)
+#include <linux/usb/langwell_otg.h>
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+/* driver data structures and utilities */
+
+/*
+ * dTD: Device Endpoint Transfer Descriptor
+ * describe to the device controller the location and quantity of
+ * data to be send/received for given transfer
+ */
+struct langwell_dtd {
+ u32 dtd_next;
+/* bits 31:5, next transfer element pointer */
+#define DTD_NEXT(d) (((d)>>5)&0x7ffffff)
+#define DTD_NEXT_MASK (0x7ffffff << 5)
+/* terminate */
+#define DTD_TERM BIT(0)
+ /* bits 7:0, execution back states */
+ u32 dtd_status:8;
+#define DTD_STATUS(d) (((d)>>0)&0xff)
+#define DTD_STS_ACTIVE BIT(7) /* active */
+#define DTD_STS_HALTED BIT(6) /* halted */
+#define DTD_STS_DBE BIT(5) /* data buffer error */
+#define DTD_STS_TRE BIT(3) /* transaction error */
+ /* bits 9:8 */
+ u32 dtd_res0:2;
+ /* bits 11:10, multipier override */
+ u32 dtd_multo:2;
+#define DTD_MULTO (BIT(11) | BIT(10))
+ /* bits 14:12 */
+ u32 dtd_res1:3;
+ /* bit 15, interrupt on complete */
+ u32 dtd_ioc:1;
+#define DTD_IOC BIT(15)
+ /* bits 30:16, total bytes */
+ u32 dtd_total:15;
+#define DTD_TOTAL(d) (((d)>>16)&0x7fff)
+#define DTD_MAX_TRANSFER_LENGTH 0x4000
+ /* bit 31 */
+ u32 dtd_res2:1;
+ /* dTD buffer pointer page 0 to 4 */
+ u32 dtd_buf[5];
+#define DTD_OFFSET_MASK 0xfff
+/* bits 31:12, buffer pointer */
+#define DTD_BUFFER(d) (((d)>>12)&0x3ff)
+/* bits 11:0, current offset */
+#define DTD_C_OFFSET(d) (((d)>>0)&0xfff)
+/* bits 10:0, frame number */
+#define DTD_FRAME(d) (((d)>>0)&0x7ff)
+
+ /* driver-private parts */
+
+ /* dtd dma address */
+ dma_addr_t dtd_dma;
+ /* next dtd virtual address */
+ struct langwell_dtd *next_dtd_virt;
+};
+
+
+/*
+ * dQH: Device Endpoint Queue Head
+ * describe where all transfers are managed
+ * 48-byte data structure, aligned on 64-byte boundary
+ *
+ * These are associated with dTD structure
+ */
+struct langwell_dqh {
+ /* endpoint capabilities and characteristics */
+ u32 dqh_res0:15; /* bits 14:0 */
+ u32 dqh_ios:1; /* bit 15, interrupt on setup */
+#define DQH_IOS BIT(15)
+ u32 dqh_mpl:11; /* bits 26:16, maximum packet length */
+#define DQH_MPL (0x7ff << 16)
+ u32 dqh_res1:2; /* bits 28:27 */
+ u32 dqh_zlt:1; /* bit 29, zero length termination */
+#define DQH_ZLT BIT(29)
+ u32 dqh_mult:2; /* bits 31:30 */
+#define DQH_MULT (BIT(30) | BIT(31))
+
+ /* current dTD pointer */
+ u32 dqh_current; /* locate the transfer in progress */
+#define DQH_C_DTD(e) \
+ (((e)>>5)&0x7ffffff) /* bits 31:5, current dTD pointer */
+
+ /* transfer overlay, hardware parts of a struct langwell_dtd */
+ u32 dtd_next;
+ u32 dtd_status:8; /* bits 7:0, execution back states */
+ u32 dtd_res0:2; /* bits 9:8 */
+ u32 dtd_multo:2; /* bits 11:10, multipier override */
+ u32 dtd_res1:3; /* bits 14:12 */
+ u32 dtd_ioc:1; /* bit 15, interrupt on complete */
+ u32 dtd_total:15; /* bits 30:16, total bytes */
+ u32 dtd_res2:1; /* bit 31 */
+ u32 dtd_buf[5]; /* dTD buffer pointer page 0 to 4 */
+
+ u32 dqh_res2;
+ struct usb_ctrlrequest dqh_setup; /* setup packet buffer */
+} __attribute__ ((aligned(64)));
+
+
+/* endpoint data structure */
+struct langwell_ep {
+ struct usb_ep ep;
+ dma_addr_t dma;
+ struct langwell_udc *dev;
+ unsigned long irqs;
+ struct list_head queue;
+ struct langwell_dqh *dqh;
+ const struct usb_endpoint_descriptor *desc;
+ char name[14];
+ unsigned stopped:1,
+ ep_type:2,
+ ep_num:8;
+};
+
+
+/* request data structure */
+struct langwell_request {
+ struct usb_request req;
+ struct langwell_dtd *dtd, *head, *tail;
+ struct langwell_ep *ep;
+ dma_addr_t dtd_dma;
+ struct list_head queue;
+ unsigned dtd_count;
+ unsigned mapped:1;
+};
+
+
+/* ep0 transfer state */
+enum ep0_state {
+ WAIT_FOR_SETUP,
+ DATA_STATE_XMIT,
+ DATA_STATE_NEED_ZLP,
+ WAIT_FOR_OUT_STATUS,
+ DATA_STATE_RECV,
+};
+
+
+/* device suspend state */
+enum lpm_state {
+ LPM_L0, /* on */
+ LPM_L1, /* LPM L1 sleep */
+ LPM_L2, /* suspend */
+ LPM_L3, /* off */
+};
+
+
+/* device data structure */
+struct langwell_udc {
+ /* each pci device provides one gadget, several endpoints */
+ struct usb_gadget gadget;
+ spinlock_t lock; /* device lock */
+ struct langwell_ep *ep;
+ struct usb_gadget_driver *driver;
+ struct otg_transceiver *transceiver;
+ u8 dev_addr;
+ u32 usb_state;
+ u32 resume_state;
+ u32 bus_reset;
+ enum lpm_state lpm_state;
+ enum ep0_state ep0_state;
+ u32 ep0_dir;
+ u16 dciversion;
+ unsigned ep_max;
+ unsigned devcap:1,
+ enabled:1,
+ region:1,
+ got_irq:1,
+ powered:1,
+ remote_wakeup:1,
+ rate:1,
+ is_reset:1,
+ softconnected:1,
+ vbus_active:1,
+ suspended:1,
+ stopped:1,
+ lpm:1; /* LPM capability */
+
+ /* pci state used to access those endpoints */
+ struct pci_dev *pdev;
+
+ /* Langwell otg transceiver */
+ struct langwell_otg *lotg;
+
+ /* control registers */
+ struct langwell_cap_regs __iomem *cap_regs;
+ struct langwell_op_regs __iomem *op_regs;
+
+ struct usb_ctrlrequest local_setup_buff;
+ struct langwell_dqh *ep_dqh;
+ size_t ep_dqh_size;
+ dma_addr_t ep_dqh_dma;
+
+ /* ep0 status request */
+ struct langwell_request *status_req;
+
+ /* dma pool */
+ struct dma_pool *dtd_pool;
+
+ /* make sure release() is done */
+ struct completion *done;
+};
+
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 8cc676e..1937d8c 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -38,7 +38,6 @@
#include <linux/usb.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
#include <mach/udc.h>
#include "pxa27x_udc.h"
@@ -474,6 +473,23 @@
}
/**
+ * ep_write_UDCCSR - set bits in UDCCSR
+ * @udc: udc device
+ * @mask: bits to set in UDCCR
+ *
+ * Sets bits in UDCCSR (UDCCSR0 and UDCCSR*).
+ *
+ * A specific case is applied to ep0 : the ACM bit is always set to 1, for
+ * SET_INTERFACE and SET_CONFIGURATION.
+ */
+static inline void ep_write_UDCCSR(struct pxa_ep *ep, int mask)
+{
+ if (is_ep0(ep))
+ mask |= UDCCSR0_ACM;
+ udc_ep_writel(ep, UDCCSR, mask);
+}
+
+/**
* ep_count_bytes_remain - get how many bytes in udc endpoint
* @ep: udc endpoint
*
@@ -861,7 +877,7 @@
*buf++ = udc_ep_readl(ep, UDCDR);
req->req.actual += count;
- udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+ ep_write_UDCCSR(ep, UDCCSR_PC);
return count;
}
@@ -969,12 +985,12 @@
if (udccsr & UDCCSR_PC) {
ep_vdbg(ep, "Clearing Transmit Complete, udccsr=%x\n",
udccsr);
- udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+ ep_write_UDCCSR(ep, UDCCSR_PC);
}
if (udccsr & UDCCSR_TRN) {
ep_vdbg(ep, "Clearing Underrun on, udccsr=%x\n",
udccsr);
- udc_ep_writel(ep, UDCCSR, UDCCSR_TRN);
+ ep_write_UDCCSR(ep, UDCCSR_TRN);
}
count = write_packet(ep, req, max);
@@ -996,7 +1012,7 @@
}
if (is_short)
- udc_ep_writel(ep, UDCCSR, UDCCSR_SP);
+ ep_write_UDCCSR(ep, UDCCSR_SP);
/* requests complete when all IN data is in the FIFO */
if (is_last) {
@@ -1029,7 +1045,7 @@
while (epout_has_pkt(ep)) {
count = read_packet(ep, req);
- udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+ ep_write_UDCCSR(ep, UDCCSR0_OPC);
inc_ep_stats_bytes(ep, count, !USB_DIR_IN);
is_short = (count < ep->fifo_size);
@@ -1074,7 +1090,7 @@
/* Sends either a short packet or a 0 length packet */
if (unlikely(is_short))
- udc_ep_writel(ep, UDCCSR, UDCCSR0_IPR);
+ ep_write_UDCCSR(ep, UDCCSR0_IPR);
ep_dbg(ep, "in %d bytes%s%s, %d left, req=%p, udccsr0=0x%03x\n",
count, is_short ? "/S" : "", is_last ? "/L" : "",
@@ -1277,7 +1293,7 @@
/* FST, FEF bits are the same for control and non control endpoints */
rc = 0;
- udc_ep_writel(ep, UDCCSR, UDCCSR_FST | UDCCSR_FEF);
+ ep_write_UDCCSR(ep, UDCCSR_FST | UDCCSR_FEF);
if (is_ep0(ep))
set_ep0state(ep->dev, STALL);
@@ -1343,7 +1359,7 @@
udc_ep_readl(ep, UDCDR);
} else {
/* most IN status is the same, but ISO can't stall */
- udc_ep_writel(ep, UDCCSR,
+ ep_write_UDCCSR(ep,
UDCCSR_PC | UDCCSR_FEF | UDCCSR_TRN
| (EPXFERTYPE_is_ISO(ep) ? 0 : UDCCSR_SST));
}
@@ -1728,6 +1744,7 @@
memset(&udc->stats, 0, sizeof(udc->stats));
udc_set_mask_UDCCR(udc, UDCCR_UDE);
+ ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_ACM);
udelay(2);
if (udc_readl(udc, UDCCR) & UDCCR_EMCE)
dev_err(udc->dev, "Configuration errors, udc disabled\n");
@@ -1893,6 +1910,15 @@
nuke(ep, -EPROTO);
+ /*
+ * In the PXA320 manual, in the section about Back-to-Back setup
+ * packets, it describes this situation. The solution is to set OPC to
+ * get rid of the status packet, and then continue with the setup
+ * packet. Generalize to pxa27x CPUs.
+ */
+ if (epout_has_pkt(ep) && (ep_count_bytes_remain(ep) == 0))
+ ep_write_UDCCSR(ep, UDCCSR0_OPC);
+
/* read SETUP packet */
for (i = 0; i < 2; i++) {
if (unlikely(ep_is_empty(ep)))
@@ -1919,7 +1945,7 @@
set_ep0state(udc, OUT_DATA_STAGE);
/* Tell UDC to enter Data Stage */
- udc_ep_writel(ep, UDCCSR, UDCCSR0_SA | UDCCSR0_OPC);
+ ep_write_UDCCSR(ep, UDCCSR0_SA | UDCCSR0_OPC);
i = udc->driver->setup(&udc->gadget, &u.r);
if (i < 0)
@@ -1929,7 +1955,7 @@
stall:
ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n",
udc_ep_readl(ep, UDCCSR), i);
- udc_ep_writel(ep, UDCCSR, UDCCSR0_FST | UDCCSR0_FTF);
+ ep_write_UDCCSR(ep, UDCCSR0_FST | UDCCSR0_FTF);
set_ep0state(udc, STALL);
goto out;
}
@@ -1966,6 +1992,8 @@
* cleared by software.
* - clearing UDCCSR0_OPC always flushes ep0. If in setup stage, never do it
* before reading ep0.
+ * This is true only for PXA27x. This is not true anymore for PXA3xx family
+ * (check Back-to-Back setup packet in developers guide).
* - irq can be called on a "packet complete" event (opc_irq=1), while
* UDCCSR0_OPC is not yet raised (delta can be as big as 100ms
* from experimentation).
@@ -1998,7 +2026,7 @@
if (udccsr0 & UDCCSR0_SST) {
ep_dbg(ep, "clearing stall status\n");
nuke(ep, -EPIPE);
- udc_ep_writel(ep, UDCCSR, UDCCSR0_SST);
+ ep_write_UDCCSR(ep, UDCCSR0_SST);
ep0_idle(udc);
}
@@ -2023,7 +2051,7 @@
break;
case IN_DATA_STAGE: /* GET_DESCRIPTOR */
if (epout_has_pkt(ep))
- udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+ ep_write_UDCCSR(ep, UDCCSR0_OPC);
if (req && !ep_is_full(ep))
completed = write_ep0_fifo(ep, req);
if (completed)
@@ -2036,7 +2064,7 @@
ep0_end_out_req(ep, req);
break;
case STALL:
- udc_ep_writel(ep, UDCCSR, UDCCSR0_FST);
+ ep_write_UDCCSR(ep, UDCCSR0_FST);
break;
case IN_STATUS_STAGE:
/*
@@ -2131,6 +2159,7 @@
set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
udc->driver->setup(&udc->gadget, &req);
+ ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_AREN);
}
/**
@@ -2159,6 +2188,7 @@
set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
udc->driver->setup(&udc->gadget, &req);
+ ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_AREN);
}
/*
@@ -2280,7 +2310,7 @@
memset(&udc->stats, 0, sizeof udc->stats);
nuke(ep, -EPROTO);
- udc_ep_writel(ep, UDCCSR, UDCCSR0_FTF | UDCCSR0_OPC);
+ ep_write_UDCCSR(ep, UDCCSR0_FTF | UDCCSR0_OPC);
ep0_idle(udc);
}
@@ -2479,6 +2509,12 @@
udc_disable(udc);
}
+#ifdef CONFIG_CPU_PXA27x
+extern void pxa27x_clear_otgph(void);
+#else
+#define pxa27x_clear_otgph() do {} while (0)
+#endif
+
#ifdef CONFIG_PM
/**
* pxa_udc_suspend - Suspend udc device
@@ -2546,8 +2582,7 @@
* Software must configure the USB OTG pad, UDC, and UHC
* to the state they were in before entering sleep mode.
*/
- if (cpu_is_pxa27x())
- PSSR |= PSSR_OTGPH;
+ pxa27x_clear_otgph();
return 0;
}
@@ -2571,7 +2606,7 @@
static int __init udc_init(void)
{
- if (!cpu_is_pxa27x())
+ if (!cpu_is_pxa27x() && !cpu_is_pxa3xx())
return -ENODEV;
printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index db58125..e25225e 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -130,6 +130,8 @@
#define UP2OCR_HXOE (1 << 17) /* Transceiver Output Enable */
#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */
+#define UDCCSR0_ACM (1 << 9) /* Ack Control Mode */
+#define UDCCSR0_AREN (1 << 8) /* Ack Response Enable */
#define UDCCSR0_SA (1 << 7) /* Setup Active */
#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
#define UDCCSR0_FST (1 << 5) /* Force Stall */
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
new file mode 100644
index 0000000..50c71aa
--- /dev/null
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -0,0 +1,3269 @@
+/* linux/drivers/usb/gadget/s3c-hsotg.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-usb-hsotg-phy.h>
+#include <plat/regs-usb-hsotg.h>
+#include <plat/regs-sys.h>
+#include <plat/udc-hs.h>
+
+#define DMA_ADDR_INVALID (~((dma_addr_t)0))
+
+/* EP0_MPS_LIMIT
+ *
+ * Unfortunately there seems to be a limit of the amount of data that can
+ * be transfered by IN transactions on EP0. This is either 127 bytes or 3
+ * packets (which practially means 1 packet and 63 bytes of data) when the
+ * MPS is set to 64.
+ *
+ * This means if we are wanting to move >127 bytes of data, we need to
+ * split the transactions up, but just doing one packet at a time does
+ * not work (this may be an implicit DATA0 PID on first packet of the
+ * transaction) and doing 2 packets is outside the controller's limits.
+ *
+ * If we try to lower the MPS size for EP0, then no transfers work properly
+ * for EP0, and the system will fail basic enumeration. As no cause for this
+ * has currently been found, we cannot support any large IN transfers for
+ * EP0.
+ */
+#define EP0_MPS_LIMIT 64
+
+struct s3c_hsotg;
+struct s3c_hsotg_req;
+
+/**
+ * struct s3c_hsotg_ep - driver endpoint definition.
+ * @ep: The gadget layer representation of the endpoint.
+ * @name: The driver generated name for the endpoint.
+ * @queue: Queue of requests for this endpoint.
+ * @parent: Reference back to the parent device structure.
+ * @req: The current request that the endpoint is processing. This is
+ * used to indicate an request has been loaded onto the endpoint
+ * and has yet to be completed (maybe due to data move, or simply
+ * awaiting an ack from the core all the data has been completed).
+ * @debugfs: File entry for debugfs file for this endpoint.
+ * @lock: State lock to protect contents of endpoint.
+ * @dir_in: Set to true if this endpoint is of the IN direction, which
+ * means that it is sending data to the Host.
+ * @index: The index for the endpoint registers.
+ * @name: The name array passed to the USB core.
+ * @halted: Set if the endpoint has been halted.
+ * @periodic: Set if this is a periodic ep, such as Interrupt
+ * @sent_zlp: Set if we've sent a zero-length packet.
+ * @total_data: The total number of data bytes done.
+ * @fifo_size: The size of the FIFO (for periodic IN endpoints)
+ * @fifo_load: The amount of data loaded into the FIFO (periodic IN)
+ * @last_load: The offset of data for the last start of request.
+ * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN
+ *
+ * This is the driver's state for each registered enpoint, allowing it
+ * to keep track of transactions that need doing. Each endpoint has a
+ * lock to protect the state, to try and avoid using an overall lock
+ * for the host controller as much as possible.
+ *
+ * For periodic IN endpoints, we have fifo_size and fifo_load to try
+ * and keep track of the amount of data in the periodic FIFO for each
+ * of these as we don't have a status register that tells us how much
+ * is in each of them.
+ */
+struct s3c_hsotg_ep {
+ struct usb_ep ep;
+ struct list_head queue;
+ struct s3c_hsotg *parent;
+ struct s3c_hsotg_req *req;
+ struct dentry *debugfs;
+
+ spinlock_t lock;
+
+ unsigned long total_data;
+ unsigned int size_loaded;
+ unsigned int last_load;
+ unsigned int fifo_load;
+ unsigned short fifo_size;
+
+ unsigned char dir_in;
+ unsigned char index;
+
+ unsigned int halted:1;
+ unsigned int periodic:1;
+ unsigned int sent_zlp:1;
+
+ char name[10];
+};
+
+#define S3C_HSOTG_EPS (8+1) /* limit to 9 for the moment */
+
+/**
+ * struct s3c_hsotg - driver state.
+ * @dev: The parent device supplied to the probe function
+ * @driver: USB gadget driver
+ * @plat: The platform specific configuration data.
+ * @regs: The memory area mapped for accessing registers.
+ * @regs_res: The resource that was allocated when claiming register space.
+ * @irq: The IRQ number we are using
+ * @debug_root: root directrory for debugfs.
+ * @debug_file: main status file for debugfs.
+ * @debug_fifo: FIFO status file for debugfs.
+ * @ep0_reply: Request used for ep0 reply.
+ * @ep0_buff: Buffer for EP0 reply data, if needed.
+ * @ctrl_buff: Buffer for EP0 control requests.
+ * @ctrl_req: Request for EP0 control packets.
+ * @eps: The endpoints being supplied to the gadget framework
+ */
+struct s3c_hsotg {
+ struct device *dev;
+ struct usb_gadget_driver *driver;
+ struct s3c_hsotg_plat *plat;
+
+ void __iomem *regs;
+ struct resource *regs_res;
+ int irq;
+
+ struct dentry *debug_root;
+ struct dentry *debug_file;
+ struct dentry *debug_fifo;
+
+ struct usb_request *ep0_reply;
+ struct usb_request *ctrl_req;
+ u8 ep0_buff[8];
+ u8 ctrl_buff[8];
+
+ struct usb_gadget gadget;
+ struct s3c_hsotg_ep eps[];
+};
+
+/**
+ * struct s3c_hsotg_req - data transfer request
+ * @req: The USB gadget request
+ * @queue: The list of requests for the endpoint this is queued for.
+ * @in_progress: Has already had size/packets written to core
+ * @mapped: DMA buffer for this request has been mapped via dma_map_single().
+ */
+struct s3c_hsotg_req {
+ struct usb_request req;
+ struct list_head queue;
+ unsigned char in_progress;
+ unsigned char mapped;
+};
+
+/* conversion functions */
+static inline struct s3c_hsotg_req *our_req(struct usb_request *req)
+{
+ return container_of(req, struct s3c_hsotg_req, req);
+}
+
+static inline struct s3c_hsotg_ep *our_ep(struct usb_ep *ep)
+{
+ return container_of(ep, struct s3c_hsotg_ep, ep);
+}
+
+static inline struct s3c_hsotg *to_hsotg(struct usb_gadget *gadget)
+{
+ return container_of(gadget, struct s3c_hsotg, gadget);
+}
+
+static inline void __orr32(void __iomem *ptr, u32 val)
+{
+ writel(readl(ptr) | val, ptr);
+}
+
+static inline void __bic32(void __iomem *ptr, u32 val)
+{
+ writel(readl(ptr) & ~val, ptr);
+}
+
+/* forward decleration of functions */
+static void s3c_hsotg_dump(struct s3c_hsotg *hsotg);
+
+/**
+ * using_dma - return the DMA status of the driver.
+ * @hsotg: The driver state.
+ *
+ * Return true if we're using DMA.
+ *
+ * Currently, we have the DMA support code worked into everywhere
+ * that needs it, but the AMBA DMA implementation in the hardware can
+ * only DMA from 32bit aligned addresses. This means that gadgets such
+ * as the CDC Ethernet cannot work as they often pass packets which are
+ * not 32bit aligned.
+ *
+ * Unfortunately the choice to use DMA or not is global to the controller
+ * and seems to be only settable when the controller is being put through
+ * a core reset. This means we either need to fix the gadgets to take
+ * account of DMA alignment, or add bounce buffers (yuerk).
+ *
+ * Until this issue is sorted out, we always return 'false'.
+ */
+static inline bool using_dma(struct s3c_hsotg *hsotg)
+{
+ return false; /* support is not complete */
+}
+
+/**
+ * s3c_hsotg_en_gsint - enable one or more of the general interrupt
+ * @hsotg: The device state
+ * @ints: A bitmask of the interrupts to enable
+ */
+static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints)
+{
+ u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK);
+ u32 new_gsintmsk;
+
+ new_gsintmsk = gsintmsk | ints;
+
+ if (new_gsintmsk != gsintmsk) {
+ dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk);
+ writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK);
+ }
+}
+
+/**
+ * s3c_hsotg_disable_gsint - disable one or more of the general interrupt
+ * @hsotg: The device state
+ * @ints: A bitmask of the interrupts to enable
+ */
+static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints)
+{
+ u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK);
+ u32 new_gsintmsk;
+
+ new_gsintmsk = gsintmsk & ~ints;
+
+ if (new_gsintmsk != gsintmsk)
+ writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK);
+}
+
+/**
+ * s3c_hsotg_ctrl_epint - enable/disable an endpoint irq
+ * @hsotg: The device state
+ * @ep: The endpoint index
+ * @dir_in: True if direction is in.
+ * @en: The enable value, true to enable
+ *
+ * Set or clear the mask for an individual endpoint's interrupt
+ * request.
+ */
+static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg,
+ unsigned int ep, unsigned int dir_in,
+ unsigned int en)
+{
+ unsigned long flags;
+ u32 bit = 1 << ep;
+ u32 daint;
+
+ if (!dir_in)
+ bit <<= 16;
+
+ local_irq_save(flags);
+ daint = readl(hsotg->regs + S3C_DAINTMSK);
+ if (en)
+ daint |= bit;
+ else
+ daint &= ~bit;
+ writel(daint, hsotg->regs + S3C_DAINTMSK);
+ local_irq_restore(flags);
+}
+
+/**
+ * s3c_hsotg_init_fifo - initialise non-periodic FIFOs
+ * @hsotg: The device instance.
+ */
+static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
+{
+ /* the ryu 2.6.24 release ahs
+ writel(0x1C0, hsotg->regs + S3C_GRXFSIZ);
+ writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) |
+ S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
+ hsotg->regs + S3C_GNPTXFSIZ);
+ */
+
+ /* set FIFO sizes to 2048/0x1C0 */
+
+ writel(2048, hsotg->regs + S3C_GRXFSIZ);
+ writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) |
+ S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
+ hsotg->regs + S3C_GNPTXFSIZ);
+}
+
+/**
+ * @ep: USB endpoint to allocate request for.
+ * @flags: Allocation flags
+ *
+ * Allocate a new USB request structure appropriate for the specified endpoint
+ */
+struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep, gfp_t flags)
+{
+ struct s3c_hsotg_req *req;
+
+ req = kzalloc(sizeof(struct s3c_hsotg_req), flags);
+ if (!req)
+ return NULL;
+
+ INIT_LIST_HEAD(&req->queue);
+
+ req->req.dma = DMA_ADDR_INVALID;
+ return &req->req;
+}
+
+/**
+ * is_ep_periodic - return true if the endpoint is in periodic mode.
+ * @hs_ep: The endpoint to query.
+ *
+ * Returns true if the endpoint is in periodic mode, meaning it is being
+ * used for an Interrupt or ISO transfer.
+ */
+static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep)
+{
+ return hs_ep->periodic;
+}
+
+/**
+ * s3c_hsotg_unmap_dma - unmap the DMA memory being used for the request
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint for the request
+ * @hs_req: The request being processed.
+ *
+ * This is the reverse of s3c_hsotg_map_dma(), called for the completion
+ * of a request to ensure the buffer is ready for access by the caller.
+*/
+static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ struct s3c_hsotg_req *hs_req)
+{
+ struct usb_request *req = &hs_req->req;
+ enum dma_data_direction dir;
+
+ dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+
+ /* ignore this if we're not moving any data */
+ if (hs_req->req.length == 0)
+ return;
+
+ if (hs_req->mapped) {
+ /* we mapped this, so unmap and remove the dma */
+
+ dma_unmap_single(hsotg->dev, req->dma, req->length, dir);
+
+ req->dma = DMA_ADDR_INVALID;
+ hs_req->mapped = 0;
+ } else {
+ dma_sync_single(hsotg->dev, req->dma, req->length, dir);
+ }
+}
+
+/**
+ * s3c_hsotg_write_fifo - write packet Data to the TxFIFO
+ * @hsotg: The controller state.
+ * @hs_ep: The endpoint we're going to write for.
+ * @hs_req: The request to write data for.
+ *
+ * This is called when the TxFIFO has some space in it to hold a new
+ * transmission and we have something to give it. The actual setup of
+ * the data size is done elsewhere, so all we have to do is to actually
+ * write the data.
+ *
+ * The return value is zero if there is more space (or nothing was done)
+ * otherwise -ENOSPC is returned if the FIFO space was used up.
+ *
+ * This routine is only needed for PIO
+*/
+static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ struct s3c_hsotg_req *hs_req)
+{
+ bool periodic = is_ep_periodic(hs_ep);
+ u32 gnptxsts = readl(hsotg->regs + S3C_GNPTXSTS);
+ int buf_pos = hs_req->req.actual;
+ int to_write = hs_ep->size_loaded;
+ void *data;
+ int can_write;
+ int pkt_round;
+
+ to_write -= (buf_pos - hs_ep->last_load);
+
+ /* if there's nothing to write, get out early */
+ if (to_write == 0)
+ return 0;
+
+ if (periodic) {
+ u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
+ int size_left;
+ int size_done;
+
+ /* work out how much data was loaded so we can calculate
+ * how much data is left in the fifo. */
+
+ size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+
+ dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n",
+ __func__, size_left,
+ hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size);
+
+ /* how much of the data has moved */
+ size_done = hs_ep->size_loaded - size_left;
+
+ /* how much data is left in the fifo */
+ can_write = hs_ep->fifo_load - size_done;
+ dev_dbg(hsotg->dev, "%s: => can_write1=%d\n",
+ __func__, can_write);
+
+ can_write = hs_ep->fifo_size - can_write;
+ dev_dbg(hsotg->dev, "%s: => can_write2=%d\n",
+ __func__, can_write);
+
+ if (can_write <= 0) {
+ s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
+ return -ENOSPC;
+ }
+ } else {
+ if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) {
+ dev_dbg(hsotg->dev,
+ "%s: no queue slots available (0x%08x)\n",
+ __func__, gnptxsts);
+
+ s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_NPTxFEmp);
+ return -ENOSPC;
+ }
+
+ can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts);
+ }
+
+ dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
+ __func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket);
+
+ /* limit to 512 bytes of data, it seems at least on the non-periodic
+ * FIFO, requests of >512 cause the endpoint to get stuck with a
+ * fragment of the end of the transfer in it.
+ */
+ if (can_write > 512)
+ can_write = 512;
+
+ /* see if we can write data */
+
+ if (to_write > can_write) {
+ to_write = can_write;
+ pkt_round = to_write % hs_ep->ep.maxpacket;
+
+ /* Not sure, but we probably shouldn't be writing partial
+ * packets into the FIFO, so round the write down to an
+ * exact number of packets.
+ *
+ * Note, we do not currently check to see if we can ever
+ * write a full packet or not to the FIFO.
+ */
+
+ if (pkt_round)
+ to_write -= pkt_round;
+
+ /* enable correct FIFO interrupt to alert us when there
+ * is more room left. */
+
+ s3c_hsotg_en_gsint(hsotg,
+ periodic ? S3C_GINTSTS_PTxFEmp :
+ S3C_GINTSTS_NPTxFEmp);
+ }
+
+ dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n",
+ to_write, hs_req->req.length, can_write, buf_pos);
+
+ if (to_write <= 0)
+ return -ENOSPC;
+
+ hs_req->req.actual = buf_pos + to_write;
+ hs_ep->total_data += to_write;
+
+ if (periodic)
+ hs_ep->fifo_load += to_write;
+
+ to_write = DIV_ROUND_UP(to_write, 4);
+ data = hs_req->req.buf + buf_pos;
+
+ writesl(hsotg->regs + S3C_EPFIFO(hs_ep->index), data, to_write);
+
+ return (to_write >= can_write) ? -ENOSPC : 0;
+}
+
+/**
+ * get_ep_limit - get the maximum data legnth for this endpoint
+ * @hs_ep: The endpoint
+ *
+ * Return the maximum data that can be queued in one go on a given endpoint
+ * so that transfers that are too long can be split.
+ */
+static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep)
+{
+ int index = hs_ep->index;
+ unsigned maxsize;
+ unsigned maxpkt;
+
+ if (index != 0) {
+ maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1;
+ maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1;
+ } else {
+ if (hs_ep->dir_in) {
+ /* maxsize = S3C_DIEPTSIZ0_XferSize_LIMIT + 1; */
+ maxsize = 64+64+1;
+ maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1;
+ } else {
+ maxsize = 0x3f;
+ maxpkt = 2;
+ }
+ }
+
+ /* we made the constant loading easier above by using +1 */
+ maxpkt--;
+ maxsize--;
+
+ /* constrain by packet count if maxpkts*pktsize is greater
+ * than the length register size. */
+
+ if ((maxpkt * hs_ep->ep.maxpacket) < maxsize)
+ maxsize = maxpkt * hs_ep->ep.maxpacket;
+
+ return maxsize;
+}
+
+/**
+ * s3c_hsotg_start_req - start a USB request from an endpoint's queue
+ * @hsotg: The controller state.
+ * @hs_ep: The endpoint to process a request for
+ * @hs_req: The request to start.
+ * @continuing: True if we are doing more for the current request.
+ *
+ * Start the given request running by setting the endpoint registers
+ * appropriately, and writing any data to the FIFOs.
+ */
+static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ struct s3c_hsotg_req *hs_req,
+ bool continuing)
+{
+ struct usb_request *ureq = &hs_req->req;
+ int index = hs_ep->index;
+ int dir_in = hs_ep->dir_in;
+ u32 epctrl_reg;
+ u32 epsize_reg;
+ u32 epsize;
+ u32 ctrl;
+ unsigned length;
+ unsigned packets;
+ unsigned maxreq;
+
+ if (index != 0) {
+ if (hs_ep->req && !continuing) {
+ dev_err(hsotg->dev, "%s: active request\n", __func__);
+ WARN_ON(1);
+ return;
+ } else if (hs_ep->req != hs_req && continuing) {
+ dev_err(hsotg->dev,
+ "%s: continue different req\n", __func__);
+ WARN_ON(1);
+ return;
+ }
+ }
+
+ epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
+ epsize_reg = dir_in ? S3C_DIEPTSIZ(index) : S3C_DOEPTSIZ(index);
+
+ dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n",
+ __func__, readl(hsotg->regs + epctrl_reg), index,
+ hs_ep->dir_in ? "in" : "out");
+
+ length = ureq->length - ureq->actual;
+
+ if (0)
+ dev_dbg(hsotg->dev,
+ "REQ buf %p len %d dma 0x%08x noi=%d zp=%d snok=%d\n",
+ ureq->buf, length, ureq->dma,
+ ureq->no_interrupt, ureq->zero, ureq->short_not_ok);
+
+ maxreq = get_ep_limit(hs_ep);
+ if (length > maxreq) {
+ int round = maxreq % hs_ep->ep.maxpacket;
+
+ dev_dbg(hsotg->dev, "%s: length %d, max-req %d, r %d\n",
+ __func__, length, maxreq, round);
+
+ /* round down to multiple of packets */
+ if (round)
+ maxreq -= round;
+
+ length = maxreq;
+ }
+
+ if (length)
+ packets = DIV_ROUND_UP(length, hs_ep->ep.maxpacket);
+ else
+ packets = 1; /* send one packet if length is zero. */
+
+ if (dir_in && index != 0)
+ epsize = S3C_DxEPTSIZ_MC(1);
+ else
+ epsize = 0;
+
+ if (index != 0 && ureq->zero) {
+ /* test for the packets being exactly right for the
+ * transfer */
+
+ if (length == (packets * hs_ep->ep.maxpacket))
+ packets++;
+ }
+
+ epsize |= S3C_DxEPTSIZ_PktCnt(packets);
+ epsize |= S3C_DxEPTSIZ_XferSize(length);
+
+ dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n",
+ __func__, packets, length, ureq->length, epsize, epsize_reg);
+
+ /* store the request as the current one we're doing */
+ hs_ep->req = hs_req;
+
+ /* write size / packets */
+ writel(epsize, hsotg->regs + epsize_reg);
+
+ ctrl = readl(hsotg->regs + epctrl_reg);
+
+ if (ctrl & S3C_DxEPCTL_Stall) {
+ dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index);
+
+ /* not sure what we can do here, if it is EP0 then we should
+ * get this cleared once the endpoint has transmitted the
+ * STALL packet, otherwise it needs to be cleared by the
+ * host.
+ */
+ }
+
+ if (using_dma(hsotg)) {
+ unsigned int dma_reg;
+
+ /* write DMA address to control register, buffer already
+ * synced by s3c_hsotg_ep_queue(). */
+
+ dma_reg = dir_in ? S3C_DIEPDMA(index) : S3C_DOEPDMA(index);
+ writel(ureq->dma, hsotg->regs + dma_reg);
+
+ dev_dbg(hsotg->dev, "%s: 0x%08x => 0x%08x\n",
+ __func__, ureq->dma, dma_reg);
+ }
+
+ ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */
+ ctrl |= S3C_DxEPCTL_USBActEp;
+ ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */
+
+ dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
+ writel(ctrl, hsotg->regs + epctrl_reg);
+
+ /* set these, it seems that DMA support increments past the end
+ * of the packet buffer so we need to calculate the length from
+ * this information. */
+ hs_ep->size_loaded = length;
+ hs_ep->last_load = ureq->actual;
+
+ if (dir_in && !using_dma(hsotg)) {
+ /* set these anyway, we may need them for non-periodic in */
+ hs_ep->fifo_load = 0;
+
+ s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
+ }
+
+ /* clear the INTknTXFEmpMsk when we start request, more as a aide
+ * to debugging to see what is going on. */
+ if (dir_in)
+ writel(S3C_DIEPMSK_INTknTXFEmpMsk,
+ hsotg->regs + S3C_DIEPINT(index));
+
+ /* Note, trying to clear the NAK here causes problems with transmit
+ * on the S3C6400 ending up with the TXFIFO becomming full. */
+
+ /* check ep is enabled */
+ if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna))
+ dev_warn(hsotg->dev,
+ "ep%d: failed to become enabled (DxEPCTL=0x%08x)?\n",
+ index, readl(hsotg->regs + epctrl_reg));
+
+ dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n",
+ __func__, readl(hsotg->regs + epctrl_reg));
+}
+
+/**
+ * s3c_hsotg_map_dma - map the DMA memory being used for the request
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint the request is on.
+ * @req: The request being processed.
+ *
+ * We've been asked to queue a request, so ensure that the memory buffer
+ * is correctly setup for DMA. If we've been passed an extant DMA address
+ * then ensure the buffer has been synced to memory. If our buffer has no
+ * DMA memory, then we map the memory and mark our request to allow us to
+ * cleanup on completion.
+*/
+static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ struct usb_request *req)
+{
+ enum dma_data_direction dir;
+ struct s3c_hsotg_req *hs_req = our_req(req);
+
+ dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+
+ /* if the length is zero, ignore the DMA data */
+ if (hs_req->req.length == 0)
+ return 0;
+
+ if (req->dma == DMA_ADDR_INVALID) {
+ dma_addr_t dma;
+
+ dma = dma_map_single(hsotg->dev, req->buf, req->length, dir);
+
+ if (unlikely(dma_mapping_error(hsotg->dev, dma)))
+ goto dma_error;
+
+ if (dma & 3) {
+ dev_err(hsotg->dev, "%s: unaligned dma buffer\n",
+ __func__);
+
+ dma_unmap_single(hsotg->dev, dma, req->length, dir);
+ return -EINVAL;
+ }
+
+ hs_req->mapped = 1;
+ req->dma = dma;
+ } else {
+ dma_sync_single(hsotg->dev, req->dma, req->length, dir);
+ hs_req->mapped = 0;
+ }
+
+ return 0;
+
+dma_error:
+ dev_err(hsotg->dev, "%s: failed to map buffer %p, %d bytes\n",
+ __func__, req->buf, req->length);
+
+ return -EIO;
+}
+
+static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
+ gfp_t gfp_flags)
+{
+ struct s3c_hsotg_req *hs_req = our_req(req);
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hs = hs_ep->parent;
+ unsigned long irqflags;
+ bool first;
+
+ dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n",
+ ep->name, req, req->length, req->buf, req->no_interrupt,
+ req->zero, req->short_not_ok);
+
+ /* initialise status of the request */
+ INIT_LIST_HEAD(&hs_req->queue);
+ req->actual = 0;
+ req->status = -EINPROGRESS;
+
+ /* if we're using DMA, sync the buffers as necessary */
+ if (using_dma(hs)) {
+ int ret = s3c_hsotg_map_dma(hs, hs_ep, req);
+ if (ret)
+ return ret;
+ }
+
+ spin_lock_irqsave(&hs_ep->lock, irqflags);
+
+ first = list_empty(&hs_ep->queue);
+ list_add_tail(&hs_req->queue, &hs_ep->queue);
+
+ if (first)
+ s3c_hsotg_start_req(hs, hs_ep, hs_req, false);
+
+ spin_unlock_irqrestore(&hs_ep->lock, irqflags);
+
+ return 0;
+}
+
+static void s3c_hsotg_ep_free_request(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ struct s3c_hsotg_req *hs_req = our_req(req);
+
+ kfree(hs_req);
+}
+
+/**
+ * s3c_hsotg_complete_oursetup - setup completion callback
+ * @ep: The endpoint the request was on.
+ * @req: The request completed.
+ *
+ * Called on completion of any requests the driver itself
+ * submitted that need cleaning up.
+ */
+static void s3c_hsotg_complete_oursetup(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hsotg = hs_ep->parent;
+
+ dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req);
+
+ s3c_hsotg_ep_free_request(ep, req);
+}
+
+/**
+ * ep_from_windex - convert control wIndex value to endpoint
+ * @hsotg: The driver state.
+ * @windex: The control request wIndex field (in host order).
+ *
+ * Convert the given wIndex into a pointer to an driver endpoint
+ * structure, or return NULL if it is not a valid endpoint.
+*/
+static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg,
+ u32 windex)
+{
+ struct s3c_hsotg_ep *ep = &hsotg->eps[windex & 0x7F];
+ int dir = (windex & USB_DIR_IN) ? 1 : 0;
+ int idx = windex & 0x7F;
+
+ if (windex >= 0x100)
+ return NULL;
+
+ if (idx > S3C_HSOTG_EPS)
+ return NULL;
+
+ if (idx && ep->dir_in != dir)
+ return NULL;
+
+ return ep;
+}
+
+/**
+ * s3c_hsotg_send_reply - send reply to control request
+ * @hsotg: The device state
+ * @ep: Endpoint 0
+ * @buff: Buffer for request
+ * @length: Length of reply.
+ *
+ * Create a request and queue it on the given endpoint. This is useful as
+ * an internal method of sending replies to certain control requests, etc.
+ */
+static int s3c_hsotg_send_reply(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *ep,
+ void *buff,
+ int length)
+{
+ struct usb_request *req;
+ int ret;
+
+ dev_dbg(hsotg->dev, "%s: buff %p, len %d\n", __func__, buff, length);
+
+ req = s3c_hsotg_ep_alloc_request(&ep->ep, GFP_ATOMIC);
+ hsotg->ep0_reply = req;
+ if (!req) {
+ dev_warn(hsotg->dev, "%s: cannot alloc req\n", __func__);
+ return -ENOMEM;
+ }
+
+ req->buf = hsotg->ep0_buff;
+ req->length = length;
+ req->zero = 1; /* always do zero-length final transfer */
+ req->complete = s3c_hsotg_complete_oursetup;
+
+ if (length)
+ memcpy(req->buf, buff, length);
+ else
+ ep->sent_zlp = 1;
+
+ ret = s3c_hsotg_ep_queue(&ep->ep, req, GFP_ATOMIC);
+ if (ret) {
+ dev_warn(hsotg->dev, "%s: cannot queue req\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * s3c_hsotg_process_req_status - process request GET_STATUS
+ * @hsotg: The device state
+ * @ctrl: USB control request
+ */
+static int s3c_hsotg_process_req_status(struct s3c_hsotg *hsotg,
+ struct usb_ctrlrequest *ctrl)
+{
+ struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
+ struct s3c_hsotg_ep *ep;
+ __le16 reply;
+ int ret;
+
+ dev_dbg(hsotg->dev, "%s: USB_REQ_GET_STATUS\n", __func__);
+
+ if (!ep0->dir_in) {
+ dev_warn(hsotg->dev, "%s: direction out?\n", __func__);
+ return -EINVAL;
+ }
+
+ switch (ctrl->bRequestType & USB_RECIP_MASK) {
+ case USB_RECIP_DEVICE:
+ reply = cpu_to_le16(0); /* bit 0 => self powered,
+ * bit 1 => remote wakeup */
+ break;
+
+ case USB_RECIP_INTERFACE:
+ /* currently, the data result should be zero */
+ reply = cpu_to_le16(0);
+ break;
+
+ case USB_RECIP_ENDPOINT:
+ ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
+ if (!ep)
+ return -ENOENT;
+
+ reply = cpu_to_le16(ep->halted ? 1 : 0);
+ break;
+
+ default:
+ return 0;
+ }
+
+ if (le16_to_cpu(ctrl->wLength) != 2)
+ return -EINVAL;
+
+ ret = s3c_hsotg_send_reply(hsotg, ep0, &reply, 2);
+ if (ret) {
+ dev_err(hsotg->dev, "%s: failed to send reply\n", __func__);
+ return ret;
+ }
+
+ return 1;
+}
+
+static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value);
+
+/**
+ * s3c_hsotg_process_req_featire - process request {SET,CLEAR}_FEATURE
+ * @hsotg: The device state
+ * @ctrl: USB control request
+ */
+static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
+ struct usb_ctrlrequest *ctrl)
+{
+ bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
+ struct s3c_hsotg_ep *ep;
+
+ dev_dbg(hsotg->dev, "%s: %s_FEATURE\n",
+ __func__, set ? "SET" : "CLEAR");
+
+ if (ctrl->bRequestType == USB_RECIP_ENDPOINT) {
+ ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
+ if (!ep) {
+ dev_dbg(hsotg->dev, "%s: no endpoint for 0x%04x\n",
+ __func__, le16_to_cpu(ctrl->wIndex));
+ return -ENOENT;
+ }
+
+ switch (le16_to_cpu(ctrl->wValue)) {
+ case USB_ENDPOINT_HALT:
+ s3c_hsotg_ep_sethalt(&ep->ep, set);
+ break;
+
+ default:
+ return -ENOENT;
+ }
+ } else
+ return -ENOENT; /* currently only deal with endpoint */
+
+ return 1;
+}
+
+/**
+ * s3c_hsotg_process_control - process a control request
+ * @hsotg: The device state
+ * @ctrl: The control request received
+ *
+ * The controller has received the SETUP phase of a control request, and
+ * needs to work out what to do next (and whether to pass it on to the
+ * gadget driver).
+ */
+static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
+ struct usb_ctrlrequest *ctrl)
+{
+ struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
+ int ret = 0;
+ u32 dcfg;
+
+ ep0->sent_zlp = 0;
+
+ dev_dbg(hsotg->dev, "ctrl Req=%02x, Type=%02x, V=%04x, L=%04x\n",
+ ctrl->bRequest, ctrl->bRequestType,
+ ctrl->wValue, ctrl->wLength);
+
+ /* record the direction of the request, for later use when enquing
+ * packets onto EP0. */
+
+ ep0->dir_in = (ctrl->bRequestType & USB_DIR_IN) ? 1 : 0;
+ dev_dbg(hsotg->dev, "ctrl: dir_in=%d\n", ep0->dir_in);
+
+ /* if we've no data with this request, then the last part of the
+ * transaction is going to implicitly be IN. */
+ if (ctrl->wLength == 0)
+ ep0->dir_in = 1;
+
+ if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+ switch (ctrl->bRequest) {
+ case USB_REQ_SET_ADDRESS:
+ dcfg = readl(hsotg->regs + S3C_DCFG);
+ dcfg &= ~S3C_DCFG_DevAddr_MASK;
+ dcfg |= ctrl->wValue << S3C_DCFG_DevAddr_SHIFT;
+ writel(dcfg, hsotg->regs + S3C_DCFG);
+
+ dev_info(hsotg->dev, "new address %d\n", ctrl->wValue);
+
+ ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
+ return;
+
+ case USB_REQ_GET_STATUS:
+ ret = s3c_hsotg_process_req_status(hsotg, ctrl);
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ ret = s3c_hsotg_process_req_feature(hsotg, ctrl);
+ break;
+ }
+ }
+
+ /* as a fallback, try delivering it to the driver to deal with */
+
+ if (ret == 0 && hsotg->driver) {
+ ret = hsotg->driver->setup(&hsotg->gadget, ctrl);
+ if (ret < 0)
+ dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
+ }
+
+ if (ret > 0) {
+ if (!ep0->dir_in) {
+ /* need to generate zlp in reply or take data */
+ /* todo - deal with any data we might be sent? */
+ ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
+ }
+ }
+
+ /* the request is either unhandlable, or is not formatted correctly
+ * so respond with a STALL for the status stage to indicate failure.
+ */
+
+ if (ret < 0) {
+ u32 reg;
+ u32 ctrl;
+
+ dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
+ reg = (ep0->dir_in) ? S3C_DIEPCTL0 : S3C_DOEPCTL0;
+
+ /* S3C_DxEPCTL_Stall will be cleared by EP once it has
+ * taken effect, so no need to clear later. */
+
+ ctrl = readl(hsotg->regs + reg);
+ ctrl |= S3C_DxEPCTL_Stall;
+ ctrl |= S3C_DxEPCTL_CNAK;
+ writel(ctrl, hsotg->regs + reg);
+
+ dev_dbg(hsotg->dev,
+ "writen DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
+ ctrl, reg, readl(hsotg->regs + reg));
+
+ /* don't belive we need to anything more to get the EP
+ * to reply with a STALL packet */
+ }
+}
+
+static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
+
+/**
+ * s3c_hsotg_complete_setup - completion of a setup transfer
+ * @ep: The endpoint the request was on.
+ * @req: The request completed.
+ *
+ * Called on completion of any requests the driver itself submitted for
+ * EP0 setup packets
+ */
+static void s3c_hsotg_complete_setup(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hsotg = hs_ep->parent;
+
+ if (req->status < 0) {
+ dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status);
+ return;
+ }
+
+ if (req->actual == 0)
+ s3c_hsotg_enqueue_setup(hsotg);
+ else
+ s3c_hsotg_process_control(hsotg, req->buf);
+}
+
+/**
+ * s3c_hsotg_enqueue_setup - start a request for EP0 packets
+ * @hsotg: The device state.
+ *
+ * Enqueue a request on EP0 if necessary to received any SETUP packets
+ * received from the host.
+ */
+static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg)
+{
+ struct usb_request *req = hsotg->ctrl_req;
+ struct s3c_hsotg_req *hs_req = our_req(req);
+ int ret;
+
+ dev_dbg(hsotg->dev, "%s: queueing setup request\n", __func__);
+
+ req->zero = 0;
+ req->length = 8;
+ req->buf = hsotg->ctrl_buff;
+ req->complete = s3c_hsotg_complete_setup;
+
+ if (!list_empty(&hs_req->queue)) {
+ dev_dbg(hsotg->dev, "%s already queued???\n", __func__);
+ return;
+ }
+
+ hsotg->eps[0].dir_in = 0;
+
+ ret = s3c_hsotg_ep_queue(&hsotg->eps[0].ep, req, GFP_ATOMIC);
+ if (ret < 0) {
+ dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret);
+ /* Don't think there's much we can do other than watch the
+ * driver fail. */
+ }
+}
+
+/**
+ * get_ep_head - return the first request on the endpoint
+ * @hs_ep: The controller endpoint to get
+ *
+ * Get the first request on the endpoint.
+*/
+static struct s3c_hsotg_req *get_ep_head(struct s3c_hsotg_ep *hs_ep)
+{
+ if (list_empty(&hs_ep->queue))
+ return NULL;
+
+ return list_first_entry(&hs_ep->queue, struct s3c_hsotg_req, queue);
+}
+
+/**
+ * s3c_hsotg_complete_request - complete a request given to us
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint the request was on.
+ * @hs_req: The request to complete.
+ * @result: The result code (0 => Ok, otherwise errno)
+ *
+ * The given request has finished, so call the necessary completion
+ * if it has one and then look to see if we can start a new request
+ * on the endpoint.
+ *
+ * Note, expects the ep to already be locked as appropriate.
+*/
+static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ struct s3c_hsotg_req *hs_req,
+ int result)
+{
+ bool restart;
+
+ if (!hs_req) {
+ dev_dbg(hsotg->dev, "%s: nothing to complete?\n", __func__);
+ return;
+ }
+
+ dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n",
+ hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete);
+
+ /* only replace the status if we've not already set an error
+ * from a previous transaction */
+
+ if (hs_req->req.status == -EINPROGRESS)
+ hs_req->req.status = result;
+
+ hs_ep->req = NULL;
+ list_del_init(&hs_req->queue);
+
+ if (using_dma(hsotg))
+ s3c_hsotg_unmap_dma(hsotg, hs_ep, hs_req);
+
+ /* call the complete request with the locks off, just in case the
+ * request tries to queue more work for this endpoint. */
+
+ if (hs_req->req.complete) {
+ spin_unlock(&hs_ep->lock);
+ hs_req->req.complete(&hs_ep->ep, &hs_req->req);
+ spin_lock(&hs_ep->lock);
+ }
+
+ /* Look to see if there is anything else to do. Note, the completion
+ * of the previous request may have caused a new request to be started
+ * so be careful when doing this. */
+
+ if (!hs_ep->req && result >= 0) {
+ restart = !list_empty(&hs_ep->queue);
+ if (restart) {
+ hs_req = get_ep_head(hs_ep);
+ s3c_hsotg_start_req(hsotg, hs_ep, hs_req, false);
+ }
+ }
+}
+
+/**
+ * s3c_hsotg_complete_request_lock - complete a request given to us (locked)
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint the request was on.
+ * @hs_req: The request to complete.
+ * @result: The result code (0 => Ok, otherwise errno)
+ *
+ * See s3c_hsotg_complete_request(), but called with the endpoint's
+ * lock held.
+*/
+static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ struct s3c_hsotg_req *hs_req,
+ int result)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hs_ep->lock, flags);
+ s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
+ spin_unlock_irqrestore(&hs_ep->lock, flags);
+}
+
+/**
+ * s3c_hsotg_rx_data - receive data from the FIFO for an endpoint
+ * @hsotg: The device state.
+ * @ep_idx: The endpoint index for the data
+ * @size: The size of data in the fifo, in bytes
+ *
+ * The FIFO status shows there is data to read from the FIFO for a given
+ * endpoint, so sort out whether we need to read the data into a request
+ * that has been made for that endpoint.
+ */
+static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
+{
+ struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep_idx];
+ struct s3c_hsotg_req *hs_req = hs_ep->req;
+ void __iomem *fifo = hsotg->regs + S3C_EPFIFO(ep_idx);
+ int to_read;
+ int max_req;
+ int read_ptr;
+
+ if (!hs_req) {
+ u32 epctl = readl(hsotg->regs + S3C_DOEPCTL(ep_idx));
+ int ptr;
+
+ dev_warn(hsotg->dev,
+ "%s: FIFO %d bytes on ep%d but no req (DxEPCTl=0x%08x)\n",
+ __func__, size, ep_idx, epctl);
+
+ /* dump the data from the FIFO, we've nothing we can do */
+ for (ptr = 0; ptr < size; ptr += 4)
+ (void)readl(fifo);
+
+ return;
+ }
+
+ spin_lock(&hs_ep->lock);
+
+ to_read = size;
+ read_ptr = hs_req->req.actual;
+ max_req = hs_req->req.length - read_ptr;
+
+ if (to_read > max_req) {
+ /* more data appeared than we where willing
+ * to deal with in this request.
+ */
+
+ /* currently we don't deal this */
+ WARN_ON_ONCE(1);
+ }
+
+ dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
+ __func__, to_read, max_req, read_ptr, hs_req->req.length);
+
+ hs_ep->total_data += to_read;
+ hs_req->req.actual += to_read;
+ to_read = DIV_ROUND_UP(to_read, 4);
+
+ /* note, we might over-write the buffer end by 3 bytes depending on
+ * alignment of the data. */
+ readsl(fifo, hs_req->req.buf + read_ptr, to_read);
+
+ spin_unlock(&hs_ep->lock);
+}
+
+/**
+ * s3c_hsotg_send_zlp - send zero-length packet on control endpoint
+ * @hsotg: The device instance
+ * @req: The request currently on this endpoint
+ *
+ * Generate a zero-length IN packet request for terminating a SETUP
+ * transaction.
+ *
+ * Note, since we don't write any data to the TxFIFO, then it is
+ * currently belived that we do not need to wait for any space in
+ * the TxFIFO.
+ */
+static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_req *req)
+{
+ u32 ctrl;
+
+ if (!req) {
+ dev_warn(hsotg->dev, "%s: no request?\n", __func__);
+ return;
+ }
+
+ if (req->req.length == 0) {
+ hsotg->eps[0].sent_zlp = 1;
+ s3c_hsotg_enqueue_setup(hsotg);
+ return;
+ }
+
+ hsotg->eps[0].dir_in = 1;
+ hsotg->eps[0].sent_zlp = 1;
+
+ dev_dbg(hsotg->dev, "sending zero-length packet\n");
+
+ /* issue a zero-sized packet to terminate this */
+ writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) |
+ S3C_DxEPTSIZ_XferSize(0), hsotg->regs + S3C_DIEPTSIZ(0));
+
+ ctrl = readl(hsotg->regs + S3C_DIEPCTL0);
+ ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */
+ ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */
+ ctrl |= S3C_DxEPCTL_USBActEp;
+ writel(ctrl, hsotg->regs + S3C_DIEPCTL0);
+}
+
+/**
+ * s3c_hsotg_handle_outdone - handle receiving OutDone/SetupDone from RXFIFO
+ * @hsotg: The device instance
+ * @epnum: The endpoint received from
+ * @was_setup: Set if processing a SetupDone event.
+ *
+ * The RXFIFO has delivered an OutDone event, which means that the data
+ * transfer for an OUT endpoint has been completed, either by a short
+ * packet or by the finish of a transfer.
+*/
+static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
+ int epnum, bool was_setup)
+{
+ struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum];
+ struct s3c_hsotg_req *hs_req = hs_ep->req;
+ struct usb_request *req = &hs_req->req;
+ int result = 0;
+
+ if (!hs_req) {
+ dev_dbg(hsotg->dev, "%s: no request active\n", __func__);
+ return;
+ }
+
+ if (using_dma(hsotg)) {
+ u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum));
+ unsigned size_done;
+ unsigned size_left;
+
+ /* Calculate the size of the transfer by checking how much
+ * is left in the endpoint size register and then working it
+ * out from the amount we loaded for the transfer.
+ *
+ * We need to do this as DMA pointers are always 32bit aligned
+ * so may overshoot/undershoot the transfer.
+ */
+
+ size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+
+ size_done = hs_ep->size_loaded - size_left;
+ size_done += hs_ep->last_load;
+
+ req->actual = size_done;
+ }
+
+ if (req->actual < req->length && req->short_not_ok) {
+ dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n",
+ __func__, req->actual, req->length);
+
+ /* todo - what should we return here? there's no one else
+ * even bothering to check the status. */
+ }
+
+ if (epnum == 0) {
+ if (!was_setup && req->complete != s3c_hsotg_complete_setup)
+ s3c_hsotg_send_zlp(hsotg, hs_req);
+ }
+
+ s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, result);
+}
+
+/**
+ * s3c_hsotg_read_frameno - read current frame number
+ * @hsotg: The device instance
+ *
+ * Return the current frame number
+*/
+static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
+{
+ u32 dsts;
+
+ dsts = readl(hsotg->regs + S3C_DSTS);
+ dsts &= S3C_DSTS_SOFFN_MASK;
+ dsts >>= S3C_DSTS_SOFFN_SHIFT;
+
+ return dsts;
+}
+
+/**
+ * s3c_hsotg_handle_rx - RX FIFO has data
+ * @hsotg: The device instance
+ *
+ * The IRQ handler has detected that the RX FIFO has some data in it
+ * that requires processing, so find out what is in there and do the
+ * appropriate read.
+ *
+ * The RXFIFO is a true FIFO, the packets comming out are still in packet
+ * chunks, so if you have x packets received on an endpoint you'll get x
+ * FIFO events delivered, each with a packet's worth of data in it.
+ *
+ * When using DMA, we should not be processing events from the RXFIFO
+ * as the actual data should be sent to the memory directly and we turn
+ * on the completion interrupts to get notifications of transfer completion.
+ */
+void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg)
+{
+ u32 grxstsr = readl(hsotg->regs + S3C_GRXSTSP);
+ u32 epnum, status, size;
+
+ WARN_ON(using_dma(hsotg));
+
+ epnum = grxstsr & S3C_GRXSTS_EPNum_MASK;
+ status = grxstsr & S3C_GRXSTS_PktSts_MASK;
+
+ size = grxstsr & S3C_GRXSTS_ByteCnt_MASK;
+ size >>= S3C_GRXSTS_ByteCnt_SHIFT;
+
+ if (1)
+ dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n",
+ __func__, grxstsr, size, epnum);
+
+#define __status(x) ((x) >> S3C_GRXSTS_PktSts_SHIFT)
+
+ switch (status >> S3C_GRXSTS_PktSts_SHIFT) {
+ case __status(S3C_GRXSTS_PktSts_GlobalOutNAK):
+ dev_dbg(hsotg->dev, "GlobalOutNAK\n");
+ break;
+
+ case __status(S3C_GRXSTS_PktSts_OutDone):
+ dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n",
+ s3c_hsotg_read_frameno(hsotg));
+
+ if (!using_dma(hsotg))
+ s3c_hsotg_handle_outdone(hsotg, epnum, false);
+ break;
+
+ case __status(S3C_GRXSTS_PktSts_SetupDone):
+ dev_dbg(hsotg->dev,
+ "SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
+ s3c_hsotg_read_frameno(hsotg),
+ readl(hsotg->regs + S3C_DOEPCTL(0)));
+
+ s3c_hsotg_handle_outdone(hsotg, epnum, true);
+ break;
+
+ case __status(S3C_GRXSTS_PktSts_OutRX):
+ s3c_hsotg_rx_data(hsotg, epnum, size);
+ break;
+
+ case __status(S3C_GRXSTS_PktSts_SetupRX):
+ dev_dbg(hsotg->dev,
+ "SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
+ s3c_hsotg_read_frameno(hsotg),
+ readl(hsotg->regs + S3C_DOEPCTL(0)));
+
+ s3c_hsotg_rx_data(hsotg, epnum, size);
+ break;
+
+ default:
+ dev_warn(hsotg->dev, "%s: unknown status %08x\n",
+ __func__, grxstsr);
+
+ s3c_hsotg_dump(hsotg);
+ break;
+ }
+}
+
+/**
+ * s3c_hsotg_ep0_mps - turn max packet size into register setting
+ * @mps: The maximum packet size in bytes.
+*/
+static u32 s3c_hsotg_ep0_mps(unsigned int mps)
+{
+ switch (mps) {
+ case 64:
+ return S3C_D0EPCTL_MPS_64;
+ case 32:
+ return S3C_D0EPCTL_MPS_32;
+ case 16:
+ return S3C_D0EPCTL_MPS_16;
+ case 8:
+ return S3C_D0EPCTL_MPS_8;
+ }
+
+ /* bad max packet size, warn and return invalid result */
+ WARN_ON(1);
+ return (u32)-1;
+}
+
+/**
+ * s3c_hsotg_set_ep_maxpacket - set endpoint's max-packet field
+ * @hsotg: The driver state.
+ * @ep: The index number of the endpoint
+ * @mps: The maximum packet size in bytes
+ *
+ * Configure the maximum packet size for the given endpoint, updating
+ * the hardware control registers to reflect this.
+ */
+static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
+ unsigned int ep, unsigned int mps)
+{
+ struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep];
+ void __iomem *regs = hsotg->regs;
+ u32 mpsval;
+ u32 reg;
+
+ if (ep == 0) {
+ /* EP0 is a special case */
+ mpsval = s3c_hsotg_ep0_mps(mps);
+ if (mpsval > 3)
+ goto bad_mps;
+ } else {
+ if (mps >= S3C_DxEPCTL_MPS_LIMIT+1)
+ goto bad_mps;
+
+ mpsval = mps;
+ }
+
+ hs_ep->ep.maxpacket = mps;
+
+ /* update both the in and out endpoint controldir_ registers, even
+ * if one of the directions may not be in use. */
+
+ reg = readl(regs + S3C_DIEPCTL(ep));
+ reg &= ~S3C_DxEPCTL_MPS_MASK;
+ reg |= mpsval;
+ writel(reg, regs + S3C_DIEPCTL(ep));
+
+ reg = readl(regs + S3C_DOEPCTL(ep));
+ reg &= ~S3C_DxEPCTL_MPS_MASK;
+ reg |= mpsval;
+ writel(reg, regs + S3C_DOEPCTL(ep));
+
+ return;
+
+bad_mps:
+ dev_err(hsotg->dev, "ep%d: bad mps of %d\n", ep, mps);
+}
+
+
+/**
+ * s3c_hsotg_trytx - check to see if anything needs transmitting
+ * @hsotg: The driver state
+ * @hs_ep: The driver endpoint to check.
+ *
+ * Check to see if there is a request that has data to send, and if so
+ * make an attempt to write data into the FIFO.
+ */
+static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep)
+{
+ struct s3c_hsotg_req *hs_req = hs_ep->req;
+
+ if (!hs_ep->dir_in || !hs_req)
+ return 0;
+
+ if (hs_req->req.actual < hs_req->req.length) {
+ dev_dbg(hsotg->dev, "trying to write more for ep%d\n",
+ hs_ep->index);
+ return s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
+ }
+
+ return 0;
+}
+
+/**
+ * s3c_hsotg_complete_in - complete IN transfer
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint that has just completed.
+ *
+ * An IN transfer has been completed, update the transfer's state and then
+ * call the relevant completion routines.
+ */
+static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep)
+{
+ struct s3c_hsotg_req *hs_req = hs_ep->req;
+ u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
+ int size_left, size_done;
+
+ if (!hs_req) {
+ dev_dbg(hsotg->dev, "XferCompl but no req\n");
+ return;
+ }
+
+ /* Calculate the size of the transfer by checking how much is left
+ * in the endpoint size register and then working it out from
+ * the amount we loaded for the transfer.
+ *
+ * We do this even for DMA, as the transfer may have incremented
+ * past the end of the buffer (DMA transfers are always 32bit
+ * aligned).
+ */
+
+ size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+
+ size_done = hs_ep->size_loaded - size_left;
+ size_done += hs_ep->last_load;
+
+ if (hs_req->req.actual != size_done)
+ dev_dbg(hsotg->dev, "%s: adjusting size done %d => %d\n",
+ __func__, hs_req->req.actual, size_done);
+
+ hs_req->req.actual = size_done;
+
+ /* if we did all of the transfer, and there is more data left
+ * around, then try restarting the rest of the request */
+
+ if (!size_left && hs_req->req.actual < hs_req->req.length) {
+ dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__);
+ s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
+ } else
+ s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0);
+}
+
+/**
+ * s3c_hsotg_epint - handle an in/out endpoint interrupt
+ * @hsotg: The driver state
+ * @idx: The index for the endpoint (0..15)
+ * @dir_in: Set if this is an IN endpoint
+ *
+ * Process and clear any interrupt pending for an individual endpoint
+*/
+static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
+ int dir_in)
+{
+ struct s3c_hsotg_ep *hs_ep = &hsotg->eps[idx];
+ u32 epint_reg = dir_in ? S3C_DIEPINT(idx) : S3C_DOEPINT(idx);
+ u32 epctl_reg = dir_in ? S3C_DIEPCTL(idx) : S3C_DOEPCTL(idx);
+ u32 epsiz_reg = dir_in ? S3C_DIEPTSIZ(idx) : S3C_DOEPTSIZ(idx);
+ u32 ints;
+ u32 clear = 0;
+
+ ints = readl(hsotg->regs + epint_reg);
+
+ dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n",
+ __func__, idx, dir_in ? "in" : "out", ints);
+
+ if (ints & S3C_DxEPINT_XferCompl) {
+ dev_dbg(hsotg->dev,
+ "%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n",
+ __func__, readl(hsotg->regs + epctl_reg),
+ readl(hsotg->regs + epsiz_reg));
+
+ /* we get OutDone from the FIFO, so we only need to look
+ * at completing IN requests here */
+ if (dir_in) {
+ s3c_hsotg_complete_in(hsotg, hs_ep);
+
+ if (idx == 0)
+ s3c_hsotg_enqueue_setup(hsotg);
+ } else if (using_dma(hsotg)) {
+ /* We're using DMA, we need to fire an OutDone here
+ * as we ignore the RXFIFO. */
+
+ s3c_hsotg_handle_outdone(hsotg, idx, false);
+ }
+
+ clear |= S3C_DxEPINT_XferCompl;
+ }
+
+ if (ints & S3C_DxEPINT_EPDisbld) {
+ dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
+ clear |= S3C_DxEPINT_EPDisbld;
+ }
+
+ if (ints & S3C_DxEPINT_AHBErr) {
+ dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__);
+ clear |= S3C_DxEPINT_AHBErr;
+ }
+
+ if (ints & S3C_DxEPINT_Setup) { /* Setup or Timeout */
+ dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__);
+
+ if (using_dma(hsotg) && idx == 0) {
+ /* this is the notification we've received a
+ * setup packet. In non-DMA mode we'd get this
+ * from the RXFIFO, instead we need to process
+ * the setup here. */
+
+ if (dir_in)
+ WARN_ON_ONCE(1);
+ else
+ s3c_hsotg_handle_outdone(hsotg, 0, true);
+ }
+
+ clear |= S3C_DxEPINT_Setup;
+ }
+
+ if (ints & S3C_DxEPINT_Back2BackSetup) {
+ dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
+ clear |= S3C_DxEPINT_Back2BackSetup;
+ }
+
+ if (dir_in) {
+ /* not sure if this is important, but we'll clear it anyway
+ */
+ if (ints & S3C_DIEPMSK_INTknTXFEmpMsk) {
+ dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
+ __func__, idx);
+ clear |= S3C_DIEPMSK_INTknTXFEmpMsk;
+ }
+
+ /* this probably means something bad is happening */
+ if (ints & S3C_DIEPMSK_INTknEPMisMsk) {
+ dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n",
+ __func__, idx);
+ clear |= S3C_DIEPMSK_INTknEPMisMsk;
+ }
+ }
+
+ writel(clear, hsotg->regs + epint_reg);
+}
+
+/**
+ * s3c_hsotg_irq_enumdone - Handle EnumDone interrupt (enumeration done)
+ * @hsotg: The device state.
+ *
+ * Handle updating the device settings after the enumeration phase has
+ * been completed.
+*/
+static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
+{
+ u32 dsts = readl(hsotg->regs + S3C_DSTS);
+ int ep0_mps = 0, ep_mps;
+
+ /* This should signal the finish of the enumeration phase
+ * of the USB handshaking, so we should now know what rate
+ * we connected at. */
+
+ dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts);
+
+ /* note, since we're limited by the size of transfer on EP0, and
+ * it seems IN transfers must be a even number of packets we do
+ * not advertise a 64byte MPS on EP0. */
+
+ /* catch both EnumSpd_FS and EnumSpd_FS48 */
+ switch (dsts & S3C_DSTS_EnumSpd_MASK) {
+ case S3C_DSTS_EnumSpd_FS:
+ case S3C_DSTS_EnumSpd_FS48:
+ hsotg->gadget.speed = USB_SPEED_FULL;
+ dev_info(hsotg->dev, "new device is full-speed\n");
+
+ ep0_mps = EP0_MPS_LIMIT;
+ ep_mps = 64;
+ break;
+
+ case S3C_DSTS_EnumSpd_HS:
+ dev_info(hsotg->dev, "new device is high-speed\n");
+ hsotg->gadget.speed = USB_SPEED_HIGH;
+
+ ep0_mps = EP0_MPS_LIMIT;
+ ep_mps = 512;
+ break;
+
+ case S3C_DSTS_EnumSpd_LS:
+ hsotg->gadget.speed = USB_SPEED_LOW;
+ dev_info(hsotg->dev, "new device is low-speed\n");
+
+ /* note, we don't actually support LS in this driver at the
+ * moment, and the documentation seems to imply that it isn't
+ * supported by the PHYs on some of the devices.
+ */
+ break;
+ }
+
+ /* we should now know the maximum packet size for an
+ * endpoint, so set the endpoints to a default value. */
+
+ if (ep0_mps) {
+ int i;
+ s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps);
+ for (i = 1; i < S3C_HSOTG_EPS; i++)
+ s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps);
+ }
+
+ /* ensure after enumeration our EP0 is active */
+
+ s3c_hsotg_enqueue_setup(hsotg);
+
+ dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+ readl(hsotg->regs + S3C_DIEPCTL0),
+ readl(hsotg->regs + S3C_DOEPCTL0));
+}
+
+/**
+ * kill_all_requests - remove all requests from the endpoint's queue
+ * @hsotg: The device state.
+ * @ep: The endpoint the requests may be on.
+ * @result: The result code to use.
+ * @force: Force removal of any current requests
+ *
+ * Go through the requests on the given endpoint and mark them
+ * completed with the given result code.
+ */
+static void kill_all_requests(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *ep,
+ int result, bool force)
+{
+ struct s3c_hsotg_req *req, *treq;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ list_for_each_entry_safe(req, treq, &ep->queue, queue) {
+ /* currently, we can't do much about an already
+ * running request on an in endpoint */
+
+ if (ep->req == req && ep->dir_in && !force)
+ continue;
+
+ s3c_hsotg_complete_request(hsotg, ep, req,
+ result);
+ }
+
+ spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+#define call_gadget(_hs, _entry) \
+ if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \
+ (_hs)->driver && (_hs)->driver->_entry) \
+ (_hs)->driver->_entry(&(_hs)->gadget);
+
+/**
+ * s3c_hsotg_disconnect_irq - disconnect irq service
+ * @hsotg: The device state.
+ *
+ * A disconnect IRQ has been received, meaning that the host has
+ * lost contact with the bus. Remove all current transactions
+ * and signal the gadget driver that this has happened.
+*/
+static void s3c_hsotg_disconnect_irq(struct s3c_hsotg *hsotg)
+{
+ unsigned ep;
+
+ for (ep = 0; ep < S3C_HSOTG_EPS; ep++)
+ kill_all_requests(hsotg, &hsotg->eps[ep], -ESHUTDOWN, true);
+
+ call_gadget(hsotg, disconnect);
+}
+
+/**
+ * s3c_hsotg_irq_fifoempty - TX FIFO empty interrupt handler
+ * @hsotg: The device state:
+ * @periodic: True if this is a periodic FIFO interrupt
+ */
+static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic)
+{
+ struct s3c_hsotg_ep *ep;
+ int epno, ret;
+
+ /* look through for any more data to transmit */
+
+ for (epno = 0; epno < S3C_HSOTG_EPS; epno++) {
+ ep = &hsotg->eps[epno];
+
+ if (!ep->dir_in)
+ continue;
+
+ if ((periodic && !ep->periodic) ||
+ (!periodic && ep->periodic))
+ continue;
+
+ ret = s3c_hsotg_trytx(hsotg, ep);
+ if (ret < 0)
+ break;
+ }
+}
+
+static struct s3c_hsotg *our_hsotg;
+
+/* IRQ flags which will trigger a retry around the IRQ loop */
+#define IRQ_RETRY_MASK (S3C_GINTSTS_NPTxFEmp | \
+ S3C_GINTSTS_PTxFEmp | \
+ S3C_GINTSTS_RxFLvl)
+
+/**
+ * s3c_hsotg_irq - handle device interrupt
+ * @irq: The IRQ number triggered
+ * @pw: The pw value when registered the handler.
+ */
+static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
+{
+ struct s3c_hsotg *hsotg = pw;
+ int retry_count = 8;
+ u32 gintsts;
+ u32 gintmsk;
+
+irq_retry:
+ gintsts = readl(hsotg->regs + S3C_GINTSTS);
+ gintmsk = readl(hsotg->regs + S3C_GINTMSK);
+
+ dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n",
+ __func__, gintsts, gintsts & gintmsk, gintmsk, retry_count);
+
+ gintsts &= gintmsk;
+
+ if (gintsts & S3C_GINTSTS_OTGInt) {
+ u32 otgint = readl(hsotg->regs + S3C_GOTGINT);
+
+ dev_info(hsotg->dev, "OTGInt: %08x\n", otgint);
+
+ writel(otgint, hsotg->regs + S3C_GOTGINT);
+ writel(S3C_GINTSTS_OTGInt, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_DisconnInt) {
+ dev_dbg(hsotg->dev, "%s: DisconnInt\n", __func__);
+ writel(S3C_GINTSTS_DisconnInt, hsotg->regs + S3C_GINTSTS);
+
+ s3c_hsotg_disconnect_irq(hsotg);
+ }
+
+ if (gintsts & S3C_GINTSTS_SessReqInt) {
+ dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__);
+ writel(S3C_GINTSTS_SessReqInt, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_EnumDone) {
+ s3c_hsotg_irq_enumdone(hsotg);
+ writel(S3C_GINTSTS_EnumDone, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_ConIDStsChng) {
+ dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n",
+ readl(hsotg->regs + S3C_DSTS),
+ readl(hsotg->regs + S3C_GOTGCTL));
+
+ writel(S3C_GINTSTS_ConIDStsChng, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & (S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt)) {
+ u32 daint = readl(hsotg->regs + S3C_DAINT);
+ u32 daint_out = daint >> S3C_DAINT_OutEP_SHIFT;
+ u32 daint_in = daint & ~(daint_out << S3C_DAINT_OutEP_SHIFT);
+ int ep;
+
+ dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint);
+
+ for (ep = 0; ep < 15 && daint_out; ep++, daint_out >>= 1) {
+ if (daint_out & 1)
+ s3c_hsotg_epint(hsotg, ep, 0);
+ }
+
+ for (ep = 0; ep < 15 && daint_in; ep++, daint_in >>= 1) {
+ if (daint_in & 1)
+ s3c_hsotg_epint(hsotg, ep, 1);
+ }
+
+ writel(daint, hsotg->regs + S3C_DAINT);
+ writel(gintsts & (S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt),
+ hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_USBRst) {
+ dev_info(hsotg->dev, "%s: USBRst\n", __func__);
+ dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
+ readl(hsotg->regs + S3C_GNPTXSTS));
+
+ kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true);
+
+ /* it seems after a reset we can end up with a situation
+ * where the TXFIFO still has data in it... try flushing
+ * it to remove anything that may still be in it.
+ */
+
+ if (1) {
+ writel(S3C_GRSTCTL_TxFNum(0) | S3C_GRSTCTL_TxFFlsh,
+ hsotg->regs + S3C_GRSTCTL);
+
+ dev_info(hsotg->dev, "GNPTXSTS=%08x\n",
+ readl(hsotg->regs + S3C_GNPTXSTS));
+ }
+
+ s3c_hsotg_enqueue_setup(hsotg);
+
+ writel(S3C_GINTSTS_USBRst, hsotg->regs + S3C_GINTSTS);
+ }
+
+ /* check both FIFOs */
+
+ if (gintsts & S3C_GINTSTS_NPTxFEmp) {
+ dev_dbg(hsotg->dev, "NPTxFEmp\n");
+
+ /* Disable the interrupt to stop it happening again
+ * unless one of these endpoint routines decides that
+ * it needs re-enabling */
+
+ s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_NPTxFEmp);
+ s3c_hsotg_irq_fifoempty(hsotg, false);
+
+ writel(S3C_GINTSTS_NPTxFEmp, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_PTxFEmp) {
+ dev_dbg(hsotg->dev, "PTxFEmp\n");
+
+ /* See note in S3C_GINTSTS_NPTxFEmp */
+
+ s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
+ s3c_hsotg_irq_fifoempty(hsotg, true);
+
+ writel(S3C_GINTSTS_PTxFEmp, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_RxFLvl) {
+ /* note, since GINTSTS_RxFLvl doubles as FIFO-not-empty,
+ * we need to retry s3c_hsotg_handle_rx if this is still
+ * set. */
+
+ s3c_hsotg_handle_rx(hsotg);
+ writel(S3C_GINTSTS_RxFLvl, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_ModeMis) {
+ dev_warn(hsotg->dev, "warning, mode mismatch triggered\n");
+ writel(S3C_GINTSTS_ModeMis, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_USBSusp) {
+ dev_info(hsotg->dev, "S3C_GINTSTS_USBSusp\n");
+ writel(S3C_GINTSTS_USBSusp, hsotg->regs + S3C_GINTSTS);
+
+ call_gadget(hsotg, suspend);
+ }
+
+ if (gintsts & S3C_GINTSTS_WkUpInt) {
+ dev_info(hsotg->dev, "S3C_GINTSTS_WkUpIn\n");
+ writel(S3C_GINTSTS_WkUpInt, hsotg->regs + S3C_GINTSTS);
+
+ call_gadget(hsotg, resume);
+ }
+
+ if (gintsts & S3C_GINTSTS_ErlySusp) {
+ dev_dbg(hsotg->dev, "S3C_GINTSTS_ErlySusp\n");
+ writel(S3C_GINTSTS_ErlySusp, hsotg->regs + S3C_GINTSTS);
+ }
+
+ /* these next two seem to crop-up occasionally causing the core
+ * to shutdown the USB transfer, so try clearing them and logging
+ * the occurence. */
+
+ if (gintsts & S3C_GINTSTS_GOUTNakEff) {
+ dev_info(hsotg->dev, "GOUTNakEff triggered\n");
+
+ s3c_hsotg_dump(hsotg);
+
+ writel(S3C_DCTL_CGOUTNak, hsotg->regs + S3C_DCTL);
+ writel(S3C_GINTSTS_GOUTNakEff, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_GINNakEff) {
+ dev_info(hsotg->dev, "GINNakEff triggered\n");
+
+ s3c_hsotg_dump(hsotg);
+
+ writel(S3C_DCTL_CGNPInNAK, hsotg->regs + S3C_DCTL);
+ writel(S3C_GINTSTS_GINNakEff, hsotg->regs + S3C_GINTSTS);
+ }
+
+ /* if we've had fifo events, we should try and go around the
+ * loop again to see if there's any point in returning yet. */
+
+ if (gintsts & IRQ_RETRY_MASK && --retry_count > 0)
+ goto irq_retry;
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * s3c_hsotg_ep_enable - enable the given endpoint
+ * @ep: The USB endpint to configure
+ * @desc: The USB endpoint descriptor to configure with.
+ *
+ * This is called from the USB gadget code's usb_ep_enable().
+*/
+static int s3c_hsotg_ep_enable(struct usb_ep *ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hsotg = hs_ep->parent;
+ unsigned long flags;
+ int index = hs_ep->index;
+ u32 epctrl_reg;
+ u32 epctrl;
+ u32 mps;
+ int dir_in;
+
+ dev_dbg(hsotg->dev,
+ "%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n",
+ __func__, ep->name, desc->bEndpointAddress, desc->bmAttributes,
+ desc->wMaxPacketSize, desc->bInterval);
+
+ /* not to be called for EP0 */
+ WARN_ON(index == 0);
+
+ dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
+ if (dir_in != hs_ep->dir_in) {
+ dev_err(hsotg->dev, "%s: direction mismatch!\n", __func__);
+ return -EINVAL;
+ }
+
+ mps = le16_to_cpu(desc->wMaxPacketSize);
+
+ /* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */
+
+ epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
+ epctrl = readl(hsotg->regs + epctrl_reg);
+
+ dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
+ __func__, epctrl, epctrl_reg);
+
+ spin_lock_irqsave(&hs_ep->lock, flags);
+
+ epctrl &= ~(S3C_DxEPCTL_EPType_MASK | S3C_DxEPCTL_MPS_MASK);
+ epctrl |= S3C_DxEPCTL_MPS(mps);
+
+ /* mark the endpoint as active, otherwise the core may ignore
+ * transactions entirely for this endpoint */
+ epctrl |= S3C_DxEPCTL_USBActEp;
+
+ /* set the NAK status on the endpoint, otherwise we might try and
+ * do something with data that we've yet got a request to process
+ * since the RXFIFO will take data for an endpoint even if the
+ * size register hasn't been set.
+ */
+
+ epctrl |= S3C_DxEPCTL_SNAK;
+
+ /* update the endpoint state */
+ hs_ep->ep.maxpacket = mps;
+
+ /* default, set to non-periodic */
+ hs_ep->periodic = 0;
+
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_ISOC:
+ dev_err(hsotg->dev, "no current ISOC support\n");
+ return -EINVAL;
+
+ case USB_ENDPOINT_XFER_BULK:
+ epctrl |= S3C_DxEPCTL_EPType_Bulk;
+ break;
+
+ case USB_ENDPOINT_XFER_INT:
+ if (dir_in) {
+ /* Allocate our TxFNum by simply using the index
+ * of the endpoint for the moment. We could do
+ * something better if the host indicates how
+ * many FIFOs we are expecting to use. */
+
+ hs_ep->periodic = 1;
+ epctrl |= S3C_DxEPCTL_TxFNum(index);
+ }
+
+ epctrl |= S3C_DxEPCTL_EPType_Intterupt;
+ break;
+
+ case USB_ENDPOINT_XFER_CONTROL:
+ epctrl |= S3C_DxEPCTL_EPType_Control;
+ break;
+ }
+
+ /* for non control endpoints, set PID to D0 */
+ if (index)
+ epctrl |= S3C_DxEPCTL_SetD0PID;
+
+ dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
+ __func__, epctrl);
+
+ writel(epctrl, hsotg->regs + epctrl_reg);
+ dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n",
+ __func__, readl(hsotg->regs + epctrl_reg));
+
+ /* enable the endpoint interrupt */
+ s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
+
+ spin_unlock_irqrestore(&hs_ep->lock, flags);
+ return 0;
+}
+
+static int s3c_hsotg_ep_disable(struct usb_ep *ep)
+{
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hsotg = hs_ep->parent;
+ int dir_in = hs_ep->dir_in;
+ int index = hs_ep->index;
+ unsigned long flags;
+ u32 epctrl_reg;
+ u32 ctrl;
+
+ dev_info(hsotg->dev, "%s(ep %p)\n", __func__, ep);
+
+ if (ep == &hsotg->eps[0].ep) {
+ dev_err(hsotg->dev, "%s: called for ep0\n", __func__);
+ return -EINVAL;
+ }
+
+ epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
+
+ /* terminate all requests with shutdown */
+ kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
+
+ spin_lock_irqsave(&hs_ep->lock, flags);
+
+ ctrl = readl(hsotg->regs + epctrl_reg);
+ ctrl &= ~S3C_DxEPCTL_EPEna;
+ ctrl &= ~S3C_DxEPCTL_USBActEp;
+ ctrl |= S3C_DxEPCTL_SNAK;
+
+ dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
+ writel(ctrl, hsotg->regs + epctrl_reg);
+
+ /* disable endpoint interrupts */
+ s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0);
+
+ spin_unlock_irqrestore(&hs_ep->lock, flags);
+ return 0;
+}
+
+/**
+ * on_list - check request is on the given endpoint
+ * @ep: The endpoint to check.
+ * @test: The request to test if it is on the endpoint.
+*/
+static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test)
+{
+ struct s3c_hsotg_req *req, *treq;
+
+ list_for_each_entry_safe(req, treq, &ep->queue, queue) {
+ if (req == test)
+ return true;
+ }
+
+ return false;
+}
+
+static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+ struct s3c_hsotg_req *hs_req = our_req(req);
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hs = hs_ep->parent;
+ unsigned long flags;
+
+ dev_info(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
+
+ if (hs_req == hs_ep->req) {
+ dev_dbg(hs->dev, "%s: already in progress\n", __func__);
+ return -EINPROGRESS;
+ }
+
+ spin_lock_irqsave(&hs_ep->lock, flags);
+
+ if (!on_list(hs_ep, hs_req)) {
+ spin_unlock_irqrestore(&hs_ep->lock, flags);
+ return -EINVAL;
+ }
+
+ s3c_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET);
+ spin_unlock_irqrestore(&hs_ep->lock, flags);
+
+ return 0;
+}
+
+static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
+{
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hs = hs_ep->parent;
+ int index = hs_ep->index;
+ unsigned long irqflags;
+ u32 epreg;
+ u32 epctl;
+
+ dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
+
+ spin_lock_irqsave(&hs_ep->lock, irqflags);
+
+ /* write both IN and OUT control registers */
+
+ epreg = S3C_DIEPCTL(index);
+ epctl = readl(hs->regs + epreg);
+
+ if (value)
+ epctl |= S3C_DxEPCTL_Stall;
+ else
+ epctl &= ~S3C_DxEPCTL_Stall;
+
+ writel(epctl, hs->regs + epreg);
+
+ epreg = S3C_DOEPCTL(index);
+ epctl = readl(hs->regs + epreg);
+
+ if (value)
+ epctl |= S3C_DxEPCTL_Stall;
+ else
+ epctl &= ~S3C_DxEPCTL_Stall;
+
+ writel(epctl, hs->regs + epreg);
+
+ spin_unlock_irqrestore(&hs_ep->lock, irqflags);
+
+ return 0;
+}
+
+static struct usb_ep_ops s3c_hsotg_ep_ops = {
+ .enable = s3c_hsotg_ep_enable,
+ .disable = s3c_hsotg_ep_disable,
+ .alloc_request = s3c_hsotg_ep_alloc_request,
+ .free_request = s3c_hsotg_ep_free_request,
+ .queue = s3c_hsotg_ep_queue,
+ .dequeue = s3c_hsotg_ep_dequeue,
+ .set_halt = s3c_hsotg_ep_sethalt,
+ /* note, don't belive we have any call for the fifo routines */
+};
+
+/**
+ * s3c_hsotg_corereset - issue softreset to the core
+ * @hsotg: The device state
+ *
+ * Issue a soft reset to the core, and await the core finishing it.
+*/
+static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
+{
+ int timeout;
+ u32 grstctl;
+
+ dev_dbg(hsotg->dev, "resetting core\n");
+
+ /* issue soft reset */
+ writel(S3C_GRSTCTL_CSftRst, hsotg->regs + S3C_GRSTCTL);
+
+ timeout = 1000;
+ do {
+ grstctl = readl(hsotg->regs + S3C_GRSTCTL);
+ } while (!(grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0);
+
+ if (!grstctl & S3C_GRSTCTL_CSftRst) {
+ dev_err(hsotg->dev, "Failed to get CSftRst asserted\n");
+ return -EINVAL;
+ }
+
+ timeout = 1000;
+
+ while (1) {
+ u32 grstctl = readl(hsotg->regs + S3C_GRSTCTL);
+
+ if (timeout-- < 0) {
+ dev_info(hsotg->dev,
+ "%s: reset failed, GRSTCTL=%08x\n",
+ __func__, grstctl);
+ return -ETIMEDOUT;
+ }
+
+ if (grstctl & S3C_GRSTCTL_CSftRst)
+ continue;
+
+ if (!(grstctl & S3C_GRSTCTL_AHBIdle))
+ continue;
+
+ break; /* reset done */
+ }
+
+ dev_dbg(hsotg->dev, "reset successful\n");
+ return 0;
+}
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ struct s3c_hsotg *hsotg = our_hsotg;
+ int ret;
+
+ if (!hsotg) {
+ printk(KERN_ERR "%s: called with no device\n", __func__);
+ return -ENODEV;
+ }
+
+ if (!driver) {
+ dev_err(hsotg->dev, "%s: no driver\n", __func__);
+ return -EINVAL;
+ }
+
+ if (driver->speed != USB_SPEED_HIGH &&
+ driver->speed != USB_SPEED_FULL) {
+ dev_err(hsotg->dev, "%s: bad speed\n", __func__);
+ }
+
+ if (!driver->bind || !driver->setup) {
+ dev_err(hsotg->dev, "%s: missing entry points\n", __func__);
+ return -EINVAL;
+ }
+
+ WARN_ON(hsotg->driver);
+
+ driver->driver.bus = NULL;
+ hsotg->driver = driver;
+ hsotg->gadget.dev.driver = &driver->driver;
+ hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask;
+ hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+
+ ret = device_add(&hsotg->gadget.dev);
+ if (ret) {
+ dev_err(hsotg->dev, "failed to register gadget device\n");
+ goto err;
+ }
+
+ ret = driver->bind(&hsotg->gadget);
+ if (ret) {
+ dev_err(hsotg->dev, "failed bind %s\n", driver->driver.name);
+
+ hsotg->gadget.dev.driver = NULL;
+ hsotg->driver = NULL;
+ goto err;
+ }
+
+ /* we must now enable ep0 ready for host detection and then
+ * set configuration. */
+
+ s3c_hsotg_corereset(hsotg);
+
+ /* set the PLL on, remove the HNP/SRP and set the PHY */
+ writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) |
+ (0x5 << 10), hsotg->regs + S3C_GUSBCFG);
+
+ /* looks like soft-reset changes state of FIFOs */
+ s3c_hsotg_init_fifo(hsotg);
+
+ __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
+
+ writel(1 << 18 | S3C_DCFG_DevSpd_HS, hsotg->regs + S3C_DCFG);
+
+ writel(S3C_GINTSTS_DisconnInt | S3C_GINTSTS_SessReqInt |
+ S3C_GINTSTS_ConIDStsChng | S3C_GINTSTS_USBRst |
+ S3C_GINTSTS_EnumDone | S3C_GINTSTS_OTGInt |
+ S3C_GINTSTS_USBSusp | S3C_GINTSTS_WkUpInt |
+ S3C_GINTSTS_GOUTNakEff | S3C_GINTSTS_GINNakEff |
+ S3C_GINTSTS_ErlySusp,
+ hsotg->regs + S3C_GINTMSK);
+
+ if (using_dma(hsotg))
+ writel(S3C_GAHBCFG_GlblIntrEn | S3C_GAHBCFG_DMAEn |
+ S3C_GAHBCFG_HBstLen_Incr4,
+ hsotg->regs + S3C_GAHBCFG);
+ else
+ writel(S3C_GAHBCFG_GlblIntrEn, hsotg->regs + S3C_GAHBCFG);
+
+ /* Enabling INTknTXFEmpMsk here seems to be a big mistake, we end
+ * up being flooded with interrupts if the host is polling the
+ * endpoint to try and read data. */
+
+ writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
+ S3C_DIEPMSK_INTknEPMisMsk |
+ S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk,
+ hsotg->regs + S3C_DIEPMSK);
+
+ /* don't need XferCompl, we get that from RXFIFO in slave mode. In
+ * DMA mode we may need this. */
+ writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
+ S3C_DOEPMSK_EPDisbldMsk |
+ using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk |
+ S3C_DIEPMSK_TimeOUTMsk) : 0,
+ hsotg->regs + S3C_DOEPMSK);
+
+ writel(0, hsotg->regs + S3C_DAINTMSK);
+
+ dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+ readl(hsotg->regs + S3C_DIEPCTL0),
+ readl(hsotg->regs + S3C_DOEPCTL0));
+
+ /* enable in and out endpoint interrupts */
+ s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt);
+
+ /* Enable the RXFIFO when in slave mode, as this is how we collect
+ * the data. In DMA mode, we get events from the FIFO but also
+ * things we cannot process, so do not use it. */
+ if (!using_dma(hsotg))
+ s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_RxFLvl);
+
+ /* Enable interrupts for EP0 in and out */
+ s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1);
+ s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1);
+
+ __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
+ udelay(10); /* see openiboot */
+ __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
+
+ dev_info(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
+
+ /* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by
+ writing to the EPCTL register.. */
+
+ /* set to read 1 8byte packet */
+ writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) |
+ S3C_DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0);
+
+ writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
+ S3C_DxEPCTL_CNAK | S3C_DxEPCTL_EPEna |
+ S3C_DxEPCTL_USBActEp,
+ hsotg->regs + S3C_DOEPCTL0);
+
+ /* enable, but don't activate EP0in */
+ writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
+ S3C_DxEPCTL_USBActEp, hsotg->regs + S3C_DIEPCTL0);
+
+ s3c_hsotg_enqueue_setup(hsotg);
+
+ dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+ readl(hsotg->regs + S3C_DIEPCTL0),
+ readl(hsotg->regs + S3C_DOEPCTL0));
+
+ /* clear global NAKs */
+ writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
+ hsotg->regs + S3C_DCTL);
+
+ /* remove the soft-disconnect and let's go */
+ __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
+
+ /* report to the user, and return */
+
+ dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
+ return 0;
+
+err:
+ hsotg->driver = NULL;
+ hsotg->gadget.dev.driver = NULL;
+ return ret;
+}
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct s3c_hsotg *hsotg = our_hsotg;
+ int ep;
+
+ if (!hsotg)
+ return -ENODEV;
+
+ if (!driver || driver != hsotg->driver || !driver->unbind)
+ return -EINVAL;
+
+ /* all endpoints should be shutdown */
+ for (ep = 0; ep < S3C_HSOTG_EPS; ep++)
+ s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
+
+ call_gadget(hsotg, disconnect);
+
+ driver->unbind(&hsotg->gadget);
+ hsotg->driver = NULL;
+ hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+
+ device_del(&hsotg->gadget.dev);
+
+ dev_info(hsotg->dev, "unregistered gadget driver '%s'\n",
+ driver->driver.name);
+
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
+{
+ return s3c_hsotg_read_frameno(to_hsotg(gadget));
+}
+
+static struct usb_gadget_ops s3c_hsotg_gadget_ops = {
+ .get_frame = s3c_hsotg_gadget_getframe,
+};
+
+/**
+ * s3c_hsotg_initep - initialise a single endpoint
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint to be initialised.
+ * @epnum: The endpoint number
+ *
+ * Initialise the given endpoint (as part of the probe and device state
+ * creation) to give to the gadget driver. Setup the endpoint name, any
+ * direction information and other state that may be required.
+ */
+static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ int epnum)
+{
+ u32 ptxfifo;
+ char *dir;
+
+ if (epnum == 0)
+ dir = "";
+ else if ((epnum % 2) == 0) {
+ dir = "out";
+ } else {
+ dir = "in";
+ hs_ep->dir_in = 1;
+ }
+
+ hs_ep->index = epnum;
+
+ snprintf(hs_ep->name, sizeof(hs_ep->name), "ep%d%s", epnum, dir);
+
+ INIT_LIST_HEAD(&hs_ep->queue);
+ INIT_LIST_HEAD(&hs_ep->ep.ep_list);
+
+ spin_lock_init(&hs_ep->lock);
+
+ /* add to the list of endpoints known by the gadget driver */
+ if (epnum)
+ list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list);
+
+ hs_ep->parent = hsotg;
+ hs_ep->ep.name = hs_ep->name;
+ hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT;
+ hs_ep->ep.ops = &s3c_hsotg_ep_ops;
+
+ /* Read the FIFO size for the Periodic TX FIFO, even if we're
+ * an OUT endpoint, we may as well do this if in future the
+ * code is changed to make each endpoint's direction changeable.
+ */
+
+ ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum));
+ hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo);
+
+ /* if we're using dma, we need to set the next-endpoint pointer
+ * to be something valid.
+ */
+
+ if (using_dma(hsotg)) {
+ u32 next = S3C_DxEPCTL_NextEp((epnum + 1) % 15);
+ writel(next, hsotg->regs + S3C_DIEPCTL(epnum));
+ writel(next, hsotg->regs + S3C_DOEPCTL(epnum));
+ }
+}
+
+/**
+ * s3c_hsotg_otgreset - reset the OtG phy block
+ * @hsotg: The host state.
+ *
+ * Power up the phy, set the basic configuration and start the PHY.
+ */
+static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
+{
+ u32 osc;
+
+ writel(0, S3C_PHYPWR);
+ mdelay(1);
+
+ osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0;
+
+ writel(osc | 0x10, S3C_PHYCLK);
+
+ /* issue a full set of resets to the otg and core */
+
+ writel(S3C_RSTCON_PHY, S3C_RSTCON);
+ udelay(20); /* at-least 10uS */
+ writel(0, S3C_RSTCON);
+}
+
+
+static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
+{
+ /* unmask subset of endpoint interrupts */
+
+ writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
+ S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk,
+ hsotg->regs + S3C_DIEPMSK);
+
+ writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
+ S3C_DOEPMSK_EPDisbldMsk | S3C_DOEPMSK_XferComplMsk,
+ hsotg->regs + S3C_DOEPMSK);
+
+ writel(0, hsotg->regs + S3C_DAINTMSK);
+
+ if (0) {
+ /* post global nak until we're ready */
+ writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak,
+ hsotg->regs + S3C_DCTL);
+ }
+
+ /* setup fifos */
+
+ dev_info(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+ readl(hsotg->regs + S3C_GRXFSIZ),
+ readl(hsotg->regs + S3C_GNPTXFSIZ));
+
+ s3c_hsotg_init_fifo(hsotg);
+
+ /* set the PLL on, remove the HNP/SRP and set the PHY */
+ writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | (0x5 << 10),
+ hsotg->regs + S3C_GUSBCFG);
+
+ writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0,
+ hsotg->regs + S3C_GAHBCFG);
+}
+
+static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
+{
+ struct device *dev = hsotg->dev;
+ void __iomem *regs = hsotg->regs;
+ u32 val;
+ int idx;
+
+ dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n",
+ readl(regs + S3C_DCFG), readl(regs + S3C_DCTL),
+ readl(regs + S3C_DIEPMSK));
+
+ dev_info(dev, "GAHBCFG=0x%08x, 0x44=0x%08x\n",
+ readl(regs + S3C_GAHBCFG), readl(regs + 0x44));
+
+ dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+ readl(regs + S3C_GRXFSIZ), readl(regs + S3C_GNPTXFSIZ));
+
+ /* show periodic fifo settings */
+
+ for (idx = 1; idx <= 15; idx++) {
+ val = readl(regs + S3C_DPTXFSIZn(idx));
+ dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx,
+ val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT,
+ val & S3C_DPTXFSIZn_DPTxFStAddr_MASK);
+ }
+
+ for (idx = 0; idx < 15; idx++) {
+ dev_info(dev,
+ "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx,
+ readl(regs + S3C_DIEPCTL(idx)),
+ readl(regs + S3C_DIEPTSIZ(idx)),
+ readl(regs + S3C_DIEPDMA(idx)));
+
+ val = readl(regs + S3C_DOEPCTL(idx));
+ dev_info(dev,
+ "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n",
+ idx, readl(regs + S3C_DOEPCTL(idx)),
+ readl(regs + S3C_DOEPTSIZ(idx)),
+ readl(regs + S3C_DOEPDMA(idx)));
+
+ }
+
+ dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
+ readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE));
+}
+
+
+/**
+ * state_show - debugfs: show overall driver and device state.
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the overall state of the hardware and
+ * some general information about each of the endpoints available
+ * to the system.
+ */
+static int state_show(struct seq_file *seq, void *v)
+{
+ struct s3c_hsotg *hsotg = seq->private;
+ void __iomem *regs = hsotg->regs;
+ int idx;
+
+ seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
+ readl(regs + S3C_DCFG),
+ readl(regs + S3C_DCTL),
+ readl(regs + S3C_DSTS));
+
+ seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
+ readl(regs + S3C_DIEPMSK), readl(regs + S3C_DOEPMSK));
+
+ seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
+ readl(regs + S3C_GINTMSK),
+ readl(regs + S3C_GINTSTS));
+
+ seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
+ readl(regs + S3C_DAINTMSK),
+ readl(regs + S3C_DAINT));
+
+ seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
+ readl(regs + S3C_GNPTXSTS),
+ readl(regs + S3C_GRXSTSR));
+
+ seq_printf(seq, "\nEndpoint status:\n");
+
+ for (idx = 0; idx < 15; idx++) {
+ u32 in, out;
+
+ in = readl(regs + S3C_DIEPCTL(idx));
+ out = readl(regs + S3C_DOEPCTL(idx));
+
+ seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
+ idx, in, out);
+
+ in = readl(regs + S3C_DIEPTSIZ(idx));
+ out = readl(regs + S3C_DOEPTSIZ(idx));
+
+ seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
+ in, out);
+
+ seq_printf(seq, "\n");
+ }
+
+ return 0;
+}
+
+static int state_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, state_show, inode->i_private);
+}
+
+static const struct file_operations state_fops = {
+ .owner = THIS_MODULE,
+ .open = state_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/**
+ * fifo_show - debugfs: show the fifo information
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * Show the FIFO information for the overall fifo and all the
+ * periodic transmission FIFOs.
+*/
+static int fifo_show(struct seq_file *seq, void *v)
+{
+ struct s3c_hsotg *hsotg = seq->private;
+ void __iomem *regs = hsotg->regs;
+ u32 val;
+ int idx;
+
+ seq_printf(seq, "Non-periodic FIFOs:\n");
+ seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + S3C_GRXFSIZ));
+
+ val = readl(regs + S3C_GNPTXFSIZ);
+ seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
+ val >> S3C_GNPTXFSIZ_NPTxFDep_SHIFT,
+ val & S3C_GNPTXFSIZ_NPTxFStAddr_MASK);
+
+ seq_printf(seq, "\nPeriodic TXFIFOs:\n");
+
+ for (idx = 1; idx <= 15; idx++) {
+ val = readl(regs + S3C_DPTXFSIZn(idx));
+
+ seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
+ val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT,
+ val & S3C_DPTXFSIZn_DPTxFStAddr_MASK);
+ }
+
+ return 0;
+}
+
+static int fifo_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, fifo_show, inode->i_private);
+}
+
+static const struct file_operations fifo_fops = {
+ .owner = THIS_MODULE,
+ .open = fifo_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+
+static const char *decode_direction(int is_in)
+{
+ return is_in ? "in" : "out";
+}
+
+/**
+ * ep_show - debugfs: show the state of an endpoint.
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the state of the given endpoint (one is
+ * registered for each available).
+*/
+static int ep_show(struct seq_file *seq, void *v)
+{
+ struct s3c_hsotg_ep *ep = seq->private;
+ struct s3c_hsotg *hsotg = ep->parent;
+ struct s3c_hsotg_req *req;
+ void __iomem *regs = hsotg->regs;
+ int index = ep->index;
+ int show_limit = 15;
+ unsigned long flags;
+
+ seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n",
+ ep->index, ep->ep.name, decode_direction(ep->dir_in));
+
+ /* first show the register state */
+
+ seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
+ readl(regs + S3C_DIEPCTL(index)),
+ readl(regs + S3C_DOEPCTL(index)));
+
+ seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
+ readl(regs + S3C_DIEPDMA(index)),
+ readl(regs + S3C_DOEPDMA(index)));
+
+ seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
+ readl(regs + S3C_DIEPINT(index)),
+ readl(regs + S3C_DOEPINT(index)));
+
+ seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
+ readl(regs + S3C_DIEPTSIZ(index)),
+ readl(regs + S3C_DOEPTSIZ(index)));
+
+ seq_printf(seq, "\n");
+ seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
+ seq_printf(seq, "total_data=%ld\n", ep->total_data);
+
+ seq_printf(seq, "request list (%p,%p):\n",
+ ep->queue.next, ep->queue.prev);
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (--show_limit < 0) {
+ seq_printf(seq, "not showing more requests...\n");
+ break;
+ }
+
+ seq_printf(seq, "%c req %p: %d bytes @%p, ",
+ req == ep->req ? '*' : ' ',
+ req, req->req.length, req->req.buf);
+ seq_printf(seq, "%d done, res %d\n",
+ req->req.actual, req->req.status);
+ }
+
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ return 0;
+}
+
+static int ep_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ep_show, inode->i_private);
+}
+
+static const struct file_operations ep_fops = {
+ .owner = THIS_MODULE,
+ .open = ep_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/**
+ * s3c_hsotg_create_debug - create debugfs directory and files
+ * @hsotg: The driver state
+ *
+ * Create the debugfs files to allow the user to get information
+ * about the state of the system. The directory name is created
+ * with the same name as the device itself, in case we end up
+ * with multiple blocks in future systems.
+*/
+static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
+{
+ struct dentry *root;
+ unsigned epidx;
+
+ root = debugfs_create_dir(dev_name(hsotg->dev), NULL);
+ hsotg->debug_root = root;
+ if (IS_ERR(root)) {
+ dev_err(hsotg->dev, "cannot create debug root\n");
+ return;
+ }
+
+ /* create general state file */
+
+ hsotg->debug_file = debugfs_create_file("state", 0444, root,
+ hsotg, &state_fops);
+
+ if (IS_ERR(hsotg->debug_file))
+ dev_err(hsotg->dev, "%s: failed to create state\n", __func__);
+
+ hsotg->debug_fifo = debugfs_create_file("fifo", 0444, root,
+ hsotg, &fifo_fops);
+
+ if (IS_ERR(hsotg->debug_fifo))
+ dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__);
+
+ /* create one file for each endpoint */
+
+ for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) {
+ struct s3c_hsotg_ep *ep = &hsotg->eps[epidx];
+
+ ep->debugfs = debugfs_create_file(ep->name, 0444,
+ root, ep, &ep_fops);
+
+ if (IS_ERR(ep->debugfs))
+ dev_err(hsotg->dev, "failed to create %s debug file\n",
+ ep->name);
+ }
+}
+
+/**
+ * s3c_hsotg_delete_debug - cleanup debugfs entries
+ * @hsotg: The driver state
+ *
+ * Cleanup (remove) the debugfs files for use on module exit.
+*/
+static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
+{
+ unsigned epidx;
+
+ for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) {
+ struct s3c_hsotg_ep *ep = &hsotg->eps[epidx];
+ debugfs_remove(ep->debugfs);
+ }
+
+ debugfs_remove(hsotg->debug_file);
+ debugfs_remove(hsotg->debug_fifo);
+ debugfs_remove(hsotg->debug_root);
+}
+
+/**
+ * s3c_hsotg_gate - set the hardware gate for the block
+ * @pdev: The device we bound to
+ * @on: On or off.
+ *
+ * Set the hardware gate setting into the block. If we end up on
+ * something other than an S3C64XX, then we might need to change this
+ * to using a platform data callback, or some other mechanism.
+ */
+static void s3c_hsotg_gate(struct platform_device *pdev, bool on)
+{
+ unsigned long flags;
+ u32 others;
+
+ local_irq_save(flags);
+
+ others = __raw_readl(S3C64XX_OTHERS);
+ if (on)
+ others |= S3C64XX_OTHERS_USBMASK;
+ else
+ others &= ~S3C64XX_OTHERS_USBMASK;
+ __raw_writel(others, S3C64XX_OTHERS);
+
+ local_irq_restore(flags);
+}
+
+struct s3c_hsotg_plat s3c_hsotg_default_pdata;
+
+static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
+{
+ struct s3c_hsotg_plat *plat = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct s3c_hsotg *hsotg;
+ struct resource *res;
+ int epnum;
+ int ret;
+
+ if (!plat)
+ plat = &s3c_hsotg_default_pdata;
+
+ hsotg = kzalloc(sizeof(struct s3c_hsotg) +
+ sizeof(struct s3c_hsotg_ep) * S3C_HSOTG_EPS,
+ GFP_KERNEL);
+ if (!hsotg) {
+ dev_err(dev, "cannot get memory\n");
+ return -ENOMEM;
+ }
+
+ hsotg->dev = dev;
+ hsotg->plat = plat;
+
+ platform_set_drvdata(pdev, hsotg);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "cannot find register resource 0\n");
+ ret = -EINVAL;
+ goto err_mem;
+ }
+
+ hsotg->regs_res = request_mem_region(res->start, resource_size(res),
+ dev_name(dev));
+ if (!hsotg->regs_res) {
+ dev_err(dev, "cannot reserve registers\n");
+ ret = -ENOENT;
+ goto err_mem;
+ }
+
+ hsotg->regs = ioremap(res->start, resource_size(res));
+ if (!hsotg->regs) {
+ dev_err(dev, "cannot map registers\n");
+ ret = -ENXIO;
+ goto err_regs_res;
+ }
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
+ dev_err(dev, "cannot find IRQ\n");
+ goto err_regs;
+ }
+
+ hsotg->irq = ret;
+
+ ret = request_irq(ret, s3c_hsotg_irq, 0, dev_name(dev), hsotg);
+ if (ret < 0) {
+ dev_err(dev, "cannot claim IRQ\n");
+ goto err_regs;
+ }
+
+ dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq);
+
+ device_initialize(&hsotg->gadget.dev);
+
+ dev_set_name(&hsotg->gadget.dev, "gadget");
+
+ hsotg->gadget.is_dualspeed = 1;
+ hsotg->gadget.ops = &s3c_hsotg_gadget_ops;
+ hsotg->gadget.name = dev_name(dev);
+
+ hsotg->gadget.dev.parent = dev;
+ hsotg->gadget.dev.dma_mask = dev->dma_mask;
+
+ /* setup endpoint information */
+
+ INIT_LIST_HEAD(&hsotg->gadget.ep_list);
+ hsotg->gadget.ep0 = &hsotg->eps[0].ep;
+
+ /* allocate EP0 request */
+
+ hsotg->ctrl_req = s3c_hsotg_ep_alloc_request(&hsotg->eps[0].ep,
+ GFP_KERNEL);
+ if (!hsotg->ctrl_req) {
+ dev_err(dev, "failed to allocate ctrl req\n");
+ goto err_regs;
+ }
+
+ /* reset the system */
+
+ s3c_hsotg_gate(pdev, true);
+
+ s3c_hsotg_otgreset(hsotg);
+ s3c_hsotg_corereset(hsotg);
+ s3c_hsotg_init(hsotg);
+
+ /* initialise the endpoints now the core has been initialised */
+ for (epnum = 0; epnum < S3C_HSOTG_EPS; epnum++)
+ s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum);
+
+ s3c_hsotg_create_debug(hsotg);
+
+ s3c_hsotg_dump(hsotg);
+
+ our_hsotg = hsotg;
+ return 0;
+
+err_regs:
+ iounmap(hsotg->regs);
+
+err_regs_res:
+ release_resource(hsotg->regs_res);
+ kfree(hsotg->regs_res);
+
+err_mem:
+ kfree(hsotg);
+ return ret;
+}
+
+static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
+{
+ struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
+
+ s3c_hsotg_delete_debug(hsotg);
+
+ usb_gadget_unregister_driver(hsotg->driver);
+
+ free_irq(hsotg->irq, hsotg);
+ iounmap(hsotg->regs);
+
+ release_resource(hsotg->regs_res);
+ kfree(hsotg->regs_res);
+
+ s3c_hsotg_gate(pdev, false);
+
+ kfree(hsotg);
+ return 0;
+}
+
+#if 1
+#define s3c_hsotg_suspend NULL
+#define s3c_hsotg_resume NULL
+#endif
+
+static struct platform_driver s3c_hsotg_driver = {
+ .driver = {
+ .name = "s3c-hsotg",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c_hsotg_probe,
+ .remove = __devexit_p(s3c_hsotg_remove),
+ .suspend = s3c_hsotg_suspend,
+ .resume = s3c_hsotg_resume,
+};
+
+static int __init s3c_hsotg_modinit(void)
+{
+ return platform_driver_register(&s3c_hsotg_driver);
+}
+
+static void __exit s3c_hsotg_modexit(void)
+{
+ platform_driver_unregister(&s3c_hsotg_driver);
+}
+
+module_init(s3c_hsotg_modinit);
+module_exit(s3c_hsotg_modexit);
+
+MODULE_DESCRIPTION("Samsung S3C USB High-speed/OtG device");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c-hsotg");
diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c
new file mode 100644
index 0000000..0f3d22f
--- /dev/null
+++ b/drivers/usb/gadget/u_audio.c
@@ -0,0 +1,319 @@
+/*
+ * u_audio.c -- ALSA audio utilities for Gadget stack
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/random.h>
+#include <linux/syscalls.h>
+
+#include "u_audio.h"
+
+/*
+ * This component encapsulates the ALSA devices for USB audio gadget
+ */
+
+#define FILE_PCM_PLAYBACK "/dev/snd/pcmC0D0p"
+#define FILE_PCM_CAPTURE "/dev/snd/pcmC0D0c"
+#define FILE_CONTROL "/dev/snd/controlC0"
+
+static char *fn_play = FILE_PCM_PLAYBACK;
+module_param(fn_play, charp, S_IRUGO);
+MODULE_PARM_DESC(fn_play, "Playback PCM device file name");
+
+static char *fn_cap = FILE_PCM_CAPTURE;
+module_param(fn_cap, charp, S_IRUGO);
+MODULE_PARM_DESC(fn_cap, "Capture PCM device file name");
+
+static char *fn_cntl = FILE_CONTROL;
+module_param(fn_cntl, charp, S_IRUGO);
+MODULE_PARM_DESC(fn_cntl, "Control device file name");
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * Some ALSA internal helper functions
+ */
+static int snd_interval_refine_set(struct snd_interval *i, unsigned int val)
+{
+ struct snd_interval t;
+ t.empty = 0;
+ t.min = t.max = val;
+ t.openmin = t.openmax = 0;
+ t.integer = 1;
+ return snd_interval_refine(i, &t);
+}
+
+static int _snd_pcm_hw_param_set(struct snd_pcm_hw_params *params,
+ snd_pcm_hw_param_t var, unsigned int val,
+ int dir)
+{
+ int changed;
+ if (hw_is_mask(var)) {
+ struct snd_mask *m = hw_param_mask(params, var);
+ if (val == 0 && dir < 0) {
+ changed = -EINVAL;
+ snd_mask_none(m);
+ } else {
+ if (dir > 0)
+ val++;
+ else if (dir < 0)
+ val--;
+ changed = snd_mask_refine_set(
+ hw_param_mask(params, var), val);
+ }
+ } else if (hw_is_interval(var)) {
+ struct snd_interval *i = hw_param_interval(params, var);
+ if (val == 0 && dir < 0) {
+ changed = -EINVAL;
+ snd_interval_none(i);
+ } else if (dir == 0)
+ changed = snd_interval_refine_set(i, val);
+ else {
+ struct snd_interval t;
+ t.openmin = 1;
+ t.openmax = 1;
+ t.empty = 0;
+ t.integer = 0;
+ if (dir < 0) {
+ t.min = val - 1;
+ t.max = val;
+ } else {
+ t.min = val;
+ t.max = val+1;
+ }
+ changed = snd_interval_refine(i, &t);
+ }
+ } else
+ return -EINVAL;
+ if (changed) {
+ params->cmask |= 1 << var;
+ params->rmask |= 1 << var;
+ }
+ return changed;
+}
+/*-------------------------------------------------------------------------*/
+
+/**
+ * Set default hardware params
+ */
+static int playback_default_hw_params(struct gaudio_snd_dev *snd)
+{
+ struct snd_pcm_substream *substream = snd->substream;
+ struct snd_pcm_hw_params *params;
+ snd_pcm_sframes_t result;
+
+ /*
+ * SNDRV_PCM_ACCESS_RW_INTERLEAVED,
+ * SNDRV_PCM_FORMAT_S16_LE
+ * CHANNELS: 2
+ * RATE: 48000
+ */
+ snd->access = SNDRV_PCM_ACCESS_RW_INTERLEAVED;
+ snd->format = SNDRV_PCM_FORMAT_S16_LE;
+ snd->channels = 2;
+ snd->rate = 48000;
+
+ params = kzalloc(sizeof(*params), GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+
+ _snd_pcm_hw_params_any(params);
+ _snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_ACCESS,
+ snd->access, 0);
+ _snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_FORMAT,
+ snd->format, 0);
+ _snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_CHANNELS,
+ snd->channels, 0);
+ _snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_RATE,
+ snd->rate, 0);
+
+ snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
+ snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_HW_PARAMS, params);
+
+ result = snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_PREPARE, NULL);
+ if (result < 0) {
+ ERROR(snd->card,
+ "Preparing sound card failed: %d\n", (int)result);
+ kfree(params);
+ return result;
+ }
+
+ /* Store the hardware parameters */
+ snd->access = params_access(params);
+ snd->format = params_format(params);
+ snd->channels = params_channels(params);
+ snd->rate = params_rate(params);
+
+ kfree(params);
+
+ INFO(snd->card,
+ "Hardware params: access %x, format %x, channels %d, rate %d\n",
+ snd->access, snd->format, snd->channels, snd->rate);
+
+ return 0;
+}
+
+/**
+ * Playback audio buffer data by ALSA PCM device
+ */
+static size_t u_audio_playback(struct gaudio *card, void *buf, size_t count)
+{
+ struct gaudio_snd_dev *snd = &card->playback;
+ struct snd_pcm_substream *substream = snd->substream;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ mm_segment_t old_fs;
+ ssize_t result;
+ snd_pcm_sframes_t frames;
+
+try_again:
+ if (runtime->status->state == SNDRV_PCM_STATE_XRUN ||
+ runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) {
+ result = snd_pcm_kernel_ioctl(substream,
+ SNDRV_PCM_IOCTL_PREPARE, NULL);
+ if (result < 0) {
+ ERROR(card, "Preparing sound card failed: %d\n",
+ (int)result);
+ return result;
+ }
+ }
+
+ frames = bytes_to_frames(runtime, count);
+ old_fs = get_fs();
+ set_fs(KERNEL_DS);
+ result = snd_pcm_lib_write(snd->substream, buf, frames);
+ if (result != frames) {
+ ERROR(card, "Playback error: %d\n", (int)result);
+ set_fs(old_fs);
+ goto try_again;
+ }
+ set_fs(old_fs);
+
+ return 0;
+}
+
+static int u_audio_get_playback_channels(struct gaudio *card)
+{
+ return card->playback.channels;
+}
+
+static int u_audio_get_playback_rate(struct gaudio *card)
+{
+ return card->playback.rate;
+}
+
+/**
+ * Open ALSA PCM and control device files
+ * Initial the PCM or control device
+ */
+static int gaudio_open_snd_dev(struct gaudio *card)
+{
+ struct snd_pcm_file *pcm_file;
+ struct gaudio_snd_dev *snd;
+
+ if (!card)
+ return -ENODEV;
+
+ /* Open control device */
+ snd = &card->control;
+ snd->filp = filp_open(fn_cntl, O_RDWR, 0);
+ if (IS_ERR(snd->filp)) {
+ int ret = PTR_ERR(snd->filp);
+ ERROR(card, "unable to open sound control device file: %s\n",
+ fn_cntl);
+ snd->filp = NULL;
+ return ret;
+ }
+ snd->card = card;
+
+ /* Open PCM playback device and setup substream */
+ snd = &card->playback;
+ snd->filp = filp_open(fn_play, O_WRONLY, 0);
+ if (IS_ERR(snd->filp)) {
+ ERROR(card, "No such PCM playback device: %s\n", fn_play);
+ snd->filp = NULL;
+ }
+ pcm_file = snd->filp->private_data;
+ snd->substream = pcm_file->substream;
+ snd->card = card;
+ playback_default_hw_params(snd);
+
+ /* Open PCM capture device and setup substream */
+ snd = &card->capture;
+ snd->filp = filp_open(fn_cap, O_RDONLY, 0);
+ if (IS_ERR(snd->filp)) {
+ ERROR(card, "No such PCM capture device: %s\n", fn_cap);
+ snd->filp = NULL;
+ }
+ pcm_file = snd->filp->private_data;
+ snd->substream = pcm_file->substream;
+ snd->card = card;
+
+ return 0;
+}
+
+/**
+ * Close ALSA PCM and control device files
+ */
+static int gaudio_close_snd_dev(struct gaudio *gau)
+{
+ struct gaudio_snd_dev *snd;
+
+ /* Close control device */
+ snd = &gau->control;
+ if (!IS_ERR(snd->filp))
+ filp_close(snd->filp, current->files);
+
+ /* Close PCM playback device and setup substream */
+ snd = &gau->playback;
+ if (!IS_ERR(snd->filp))
+ filp_close(snd->filp, current->files);
+
+ /* Close PCM capture device and setup substream */
+ snd = &gau->capture;
+ if (!IS_ERR(snd->filp))
+ filp_close(snd->filp, current->files);
+
+ return 0;
+}
+
+/**
+ * gaudio_setup - setup ALSA interface and preparing for USB transfer
+ *
+ * This sets up PCM, mixer or MIDI ALSA devices fore USB gadget using.
+ *
+ * Returns negative errno, or zero on success
+ */
+int __init gaudio_setup(struct gaudio *card)
+{
+ int ret;
+
+ ret = gaudio_open_snd_dev(card);
+ if (ret)
+ ERROR(card, "we need at least one control device\n");
+
+ return ret;
+
+}
+
+/**
+ * gaudio_cleanup - remove ALSA device interface
+ *
+ * This is called to free all resources allocated by @gaudio_setup().
+ */
+void gaudio_cleanup(struct gaudio *card)
+{
+ if (card)
+ gaudio_close_snd_dev(card);
+}
+
diff --git a/drivers/usb/gadget/u_audio.h b/drivers/usb/gadget/u_audio.h
new file mode 100644
index 0000000..cc8d159
--- /dev/null
+++ b/drivers/usb/gadget/u_audio.h
@@ -0,0 +1,56 @@
+/*
+ * u_audio.h -- interface to USB gadget "ALSA AUDIO" utilities
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __U_AUDIO_H
+#define __U_AUDIO_H
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/composite.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "gadget_chips.h"
+
+/*
+ * This represents the USB side of an audio card device, managed by a USB
+ * function which provides control and stream interfaces.
+ */
+
+struct gaudio_snd_dev {
+ struct gaudio *card;
+ struct file *filp;
+ struct snd_pcm_substream *substream;
+ int access;
+ int format;
+ int channels;
+ int rate;
+};
+
+struct gaudio {
+ struct usb_function func;
+ struct usb_gadget *gadget;
+
+ /* ALSA sound device interfaces */
+ struct gaudio_snd_dev control;
+ struct gaudio_snd_dev playback;
+ struct gaudio_snd_dev capture;
+
+ /* TODO */
+};
+
+int gaudio_setup(struct gaudio *card);
+void gaudio_cleanup(struct gaudio *card);
+
+#endif /* __U_AUDIO_H */
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 0a4d99a..fc6e709 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -371,6 +371,7 @@
req->length = len;
list_del(&req->list);
+ req->zero = (gs_buf_data_avail(&port->port_write_buf) == 0);
pr_vdebug(PREFIX "%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
port->port_num, len, *((u8 *)req->buf),
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 845479f..1576a05 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -17,6 +17,26 @@
To compile this driver as a module, choose M here: the
module will be called c67x00.
+config USB_XHCI_HCD
+ tristate "xHCI HCD (USB 3.0) support (EXPERIMENTAL)"
+ depends on USB && PCI && EXPERIMENTAL
+ ---help---
+ The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
+ "SuperSpeed" host controller hardware.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xhci-hcd.
+
+config USB_XHCI_HCD_DEBUGGING
+ bool "Debugging for the xHCI host controller"
+ depends on USB_XHCI_HCD
+ ---help---
+ Say 'Y' to turn on debugging for the xHCI host controller driver.
+ This will spew debugging output, even in interrupt context.
+ This should only be used for debugging xHCI driver bugs.
+
+ If unsure, say N.
+
config USB_EHCI_HCD
tristate "EHCI HCD (USB 2.0) support"
depends on USB && USB_ARCH_HAS_EHCI
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index f163571..289d748 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -12,6 +12,7 @@
ifeq ($(CONFIG_FHCI_DEBUG),y)
fhci-objs += fhci-dbg.o
endif
+xhci-objs := xhci-hcd.o xhci-mem.o xhci-pci.o xhci-ring.o xhci-hub.o xhci-dbg.o
obj-$(CONFIG_USB_WHCI_HCD) += whci/
@@ -23,6 +24,7 @@
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
+obj-$(CONFIG_USB_XHCI_HCD) += xhci.o
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index bf69f47..c3a778b 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -97,6 +97,7 @@
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 01c3da3..bf86809 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -309,6 +309,7 @@
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c637207..2b72473 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1024,6 +1024,51 @@
return;
}
+static void
+ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct ehci_qh *qh;
+ int eptype = usb_endpoint_type(&ep->desc);
+
+ if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
+ return;
+
+ rescan:
+ spin_lock_irq(&ehci->lock);
+ qh = ep->hcpriv;
+
+ /* For Bulk and Interrupt endpoints we maintain the toggle state
+ * in the hardware; the toggle bits in udev aren't used at all.
+ * When an endpoint is reset by usb_clear_halt() we must reset
+ * the toggle bit in the QH.
+ */
+ if (qh) {
+ if (!list_empty(&qh->qtd_list)) {
+ WARN_ONCE(1, "clear_halt for a busy endpoint\n");
+ } else if (qh->qh_state == QH_STATE_IDLE) {
+ qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
+ } else {
+ /* It's not safe to write into the overlay area
+ * while the QH is active. Unlink it first and
+ * wait for the unlink to complete.
+ */
+ if (qh->qh_state == QH_STATE_LINKED) {
+ if (eptype == USB_ENDPOINT_XFER_BULK) {
+ unlink_async(ehci, qh);
+ } else {
+ intr_deschedule(ehci, qh);
+ (void) qh_schedule(ehci, qh);
+ }
+ }
+ spin_unlock_irq(&ehci->lock);
+ schedule_timeout_uninterruptible(1);
+ goto rescan;
+ }
+ }
+ spin_unlock_irq(&ehci->lock);
+}
+
static int ehci_get_frame (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
@@ -1097,7 +1142,7 @@
sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
#ifdef DEBUG
- ehci_debug_root = debugfs_create_dir("ehci", NULL);
+ ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root);
if (!ehci_debug_root) {
retval = -ENOENT;
goto err_debug;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 97a53a4..f46ad27 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -391,7 +391,7 @@
/* with integrated TT there is no companion! */
if (!ehci_is_TDI(ehci))
- i = device_create_file(ehci_to_hcd(ehci)->self.dev,
+ i = device_create_file(ehci_to_hcd(ehci)->self.controller,
&dev_attr_companion);
}
@@ -399,7 +399,7 @@
{
/* with integrated TT there is no companion! */
if (!ehci_is_TDI(ehci))
- device_remove_file(ehci_to_hcd(ehci)->self.dev,
+ device_remove_file(ehci_to_hcd(ehci)->self.controller,
&dev_attr_companion);
}
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index 9c32063..a44bb4a 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -51,6 +51,7 @@
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
.get_frame_number = ehci_get_frame,
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 9d48790..770dd9a 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -149,6 +149,7 @@
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
@@ -187,7 +188,7 @@
}
}
-static int __init ehci_orion_drv_probe(struct platform_device *pdev)
+static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
{
struct orion_ehci_data *pd = pdev->dev.platform_data;
struct resource *res;
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 5aa8bce..f3683e1 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -268,7 +268,7 @@
* Also they depend on separate root hub suspend/resume.
*/
-static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
+static int ehci_pci_suspend(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
unsigned long flags;
@@ -293,12 +293,6 @@
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
- /* make sure snapshot being resumed re-enumerates everything */
- if (message.event == PM_EVENT_PRETHAW) {
- ehci_halt(ehci);
- ehci_reset(ehci);
- }
-
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
bail:
spin_unlock_irqrestore (&ehci->lock, flags);
@@ -309,7 +303,7 @@
return rc;
}
-static int ehci_pci_resume(struct usb_hcd *hcd)
+static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
@@ -322,10 +316,12 @@
/* Mark hardware accessible again as we are out of D3 state by now */
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- /* If CF is still set, we maintained PCI Vaux power.
+ /* If CF is still set and we aren't resuming from hibernation
+ * then we maintained PCI Vaux power.
* Just undo the effect of ehci_pci_suspend().
*/
- if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
+ if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF &&
+ !hibernated) {
int mask = INTR_MASK;
if (!hcd->self.root_hub->do_remote_wakeup)
@@ -335,7 +331,6 @@
return 0;
}
- ehci_dbg(ehci, "lost power, restarting\n");
usb_root_hub_lost_power(hcd->self.root_hub);
/* Else reset, to cope with power loss or flush-to-storage
@@ -393,6 +388,7 @@
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
@@ -429,10 +425,11 @@
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
-
-#ifdef CONFIG_PM
- .suspend = usb_hcd_pci_suspend,
- .resume = usb_hcd_pci_resume,
-#endif
.shutdown = usb_hcd_pci_shutdown,
+
+#ifdef CONFIG_PM_SLEEP
+ .driver = {
+ .pm = &usb_hcd_pci_pm_ops
+ },
+#endif
};
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index ef732b7..fbd27228 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -61,6 +61,7 @@
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index bb870b8..eecd2a0 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -65,6 +65,7 @@
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
.get_frame_number = ehci_get_frame,
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 1976b1b..3192f68 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -93,22 +93,6 @@
qh->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
qh->hw_alt_next = EHCI_LIST_END(ehci);
- /* Except for control endpoints, we make hardware maintain data
- * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
- * and set the pseudo-toggle in udev. Only usb_clear_halt() will
- * ever clear it.
- */
- if (!(qh->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
- unsigned is_out, epnum;
-
- is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8));
- epnum = (hc32_to_cpup(ehci, &qh->hw_info1) >> 8) & 0x0f;
- if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
- qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
- usb_settoggle (qh->dev, epnum, is_out, 1);
- }
- }
-
/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
wmb ();
qh->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
@@ -850,7 +834,6 @@
qh->qh_state = QH_STATE_IDLE;
qh->hw_info1 = cpu_to_hc32(ehci, info1);
qh->hw_info2 = cpu_to_hc32(ehci, info2);
- usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
qh_refresh (ehci, qh);
return qh;
}
@@ -881,7 +864,7 @@
}
}
- /* clear halt and/or toggle; and maybe recover from silicon quirk */
+ /* clear halt and maybe recover from silicon quirk */
if (qh->qh_state == QH_STATE_IDLE)
qh_refresh (ehci, qh);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 556d0ec..9d1babc 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -760,8 +760,10 @@
if (status) {
/* "normal" case, uframing flexible except with splits */
if (qh->period) {
- frame = qh->period - 1;
- do {
+ int i;
+
+ for (i = qh->period; status && i > 0; --i) {
+ frame = ++ehci->random_frame % qh->period;
for (uframe = 0; uframe < 8; uframe++) {
status = check_intr_schedule (ehci,
frame, uframe, qh,
@@ -769,7 +771,7 @@
if (status == 0)
break;
}
- } while (status && frame--);
+ }
/* qh->period == 0 means every uframe */
} else {
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 6cff195..90ad339 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -116,6 +116,7 @@
struct timer_list watchdog;
unsigned long actions;
unsigned stamp;
+ unsigned random_frame;
unsigned long next_statechange;
u32 command;
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
index ea8a425..e799f86 100644
--- a/drivers/usb/host/fhci-dbg.c
+++ b/drivers/usb/host/fhci-dbg.c
@@ -108,7 +108,7 @@
{
struct device *dev = fhci_to_hcd(fhci)->self.controller;
- fhci->dfs_root = debugfs_create_dir(dev_name(dev), NULL);
+ fhci->dfs_root = debugfs_create_dir(dev_name(dev), usb_debug_root);
if (!fhci->dfs_root) {
WARN_ON(1);
return;
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index cbf30e5..88b0321 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -172,25 +172,6 @@
}
-static int hwahc_op_suspend(struct usb_hcd *usb_hcd, pm_message_t msg)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- dev_err(wusbhc->dev, "%s (%p [%p], 0x%lx) UNIMPLEMENTED\n", __func__,
- usb_hcd, hwahc, *(unsigned long *) &msg);
- return -ENOSYS;
-}
-
-static int hwahc_op_resume(struct usb_hcd *usb_hcd)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
-
- dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
- usb_hcd, hwahc);
- return -ENOSYS;
-}
-
/*
* No need to abort pipes, as when this is called, all the children
* has been disconnected and that has done it [through
@@ -598,8 +579,6 @@
.flags = HCD_USB2, /* FIXME */
.reset = hwahc_op_reset,
.start = hwahc_op_start,
- .pci_suspend = hwahc_op_suspend,
- .pci_resume = hwahc_op_resume,
.stop = hwahc_op_stop,
.get_frame_number = hwahc_op_get_frame_number,
.urb_enqueue = hwahc_op_urb_enqueue,
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index d3269656..811f5dfd 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -431,7 +431,7 @@
struct debug_buffer {
ssize_t (*fill_func)(struct debug_buffer *); /* fill method */
- struct device *dev;
+ struct ohci_hcd *ohci;
struct mutex mutex; /* protect filling of buffer */
size_t count; /* number of characters filled into buffer */
char *page;
@@ -505,15 +505,11 @@
static ssize_t fill_async_buffer(struct debug_buffer *buf)
{
- struct usb_bus *bus;
- struct usb_hcd *hcd;
struct ohci_hcd *ohci;
size_t temp;
unsigned long flags;
- bus = dev_get_drvdata(buf->dev);
- hcd = bus_to_hcd(bus);
- ohci = hcd_to_ohci(hcd);
+ ohci = buf->ohci;
/* display control and bulk lists together, for simplicity */
spin_lock_irqsave (&ohci->lock, flags);
@@ -529,8 +525,6 @@
static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
{
- struct usb_bus *bus;
- struct usb_hcd *hcd;
struct ohci_hcd *ohci;
struct ed **seen, *ed;
unsigned long flags;
@@ -542,9 +536,7 @@
return 0;
seen_count = 0;
- bus = (struct usb_bus *)dev_get_drvdata(buf->dev);
- hcd = bus_to_hcd(bus);
- ohci = hcd_to_ohci(hcd);
+ ohci = buf->ohci;
next = buf->page;
size = PAGE_SIZE;
@@ -626,7 +618,6 @@
static ssize_t fill_registers_buffer(struct debug_buffer *buf)
{
- struct usb_bus *bus;
struct usb_hcd *hcd;
struct ohci_hcd *ohci;
struct ohci_regs __iomem *regs;
@@ -635,9 +626,8 @@
char *next;
u32 rdata;
- bus = (struct usb_bus *)dev_get_drvdata(buf->dev);
- hcd = bus_to_hcd(bus);
- ohci = hcd_to_ohci(hcd);
+ ohci = buf->ohci;
+ hcd = ohci_to_hcd(ohci);
regs = ohci->regs;
next = buf->page;
size = PAGE_SIZE;
@@ -710,7 +700,7 @@
return PAGE_SIZE - size;
}
-static struct debug_buffer *alloc_buffer(struct device *dev,
+static struct debug_buffer *alloc_buffer(struct ohci_hcd *ohci,
ssize_t (*fill_func)(struct debug_buffer *))
{
struct debug_buffer *buf;
@@ -718,7 +708,7 @@
buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
if (buf) {
- buf->dev = dev;
+ buf->ohci = ohci;
buf->fill_func = fill_func;
mutex_init(&buf->mutex);
}
@@ -810,26 +800,25 @@
static inline void create_debug_files (struct ohci_hcd *ohci)
{
struct usb_bus *bus = &ohci_to_hcd(ohci)->self;
- struct device *dev = bus->dev;
ohci->debug_dir = debugfs_create_dir(bus->bus_name, ohci_debug_root);
if (!ohci->debug_dir)
goto dir_error;
ohci->debug_async = debugfs_create_file("async", S_IRUGO,
- ohci->debug_dir, dev,
+ ohci->debug_dir, ohci,
&debug_async_fops);
if (!ohci->debug_async)
goto async_error;
ohci->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
- ohci->debug_dir, dev,
+ ohci->debug_dir, ohci,
&debug_periodic_fops);
if (!ohci->debug_periodic)
goto periodic_error;
ohci->debug_registers = debugfs_create_file("registers", S_IRUGO,
- ohci->debug_dir, dev,
+ ohci->debug_dir, ohci,
&debug_registers_fops);
if (!ohci->debug_registers)
goto registers_error;
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 25db704..5815168 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -571,7 +571,7 @@
*/
static int ohci_run (struct ohci_hcd *ohci)
{
- u32 mask, temp;
+ u32 mask, val;
int first = ohci->fminterval == 0;
struct usb_hcd *hcd = ohci_to_hcd(ohci);
@@ -580,8 +580,8 @@
/* boot firmware should have set this up (5.1.1.3.1) */
if (first) {
- temp = ohci_readl (ohci, &ohci->regs->fminterval);
- ohci->fminterval = temp & 0x3fff;
+ val = ohci_readl (ohci, &ohci->regs->fminterval);
+ ohci->fminterval = val & 0x3fff;
if (ohci->fminterval != FI)
ohci_dbg (ohci, "fminterval delta %d\n",
ohci->fminterval - FI);
@@ -600,25 +600,25 @@
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
- temp = 0;
+ val = 0;
break;
case OHCI_USB_SUSPEND:
case OHCI_USB_RESUME:
ohci->hc_control &= OHCI_CTRL_RWC;
ohci->hc_control |= OHCI_USB_RESUME;
- temp = 10 /* msec wait */;
+ val = 10 /* msec wait */;
break;
// case OHCI_USB_RESET:
default:
ohci->hc_control &= OHCI_CTRL_RWC;
ohci->hc_control |= OHCI_USB_RESET;
- temp = 50 /* msec wait */;
+ val = 50 /* msec wait */;
break;
}
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
// flush the writes
(void) ohci_readl (ohci, &ohci->regs->control);
- msleep(temp);
+ msleep(val);
memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
@@ -628,9 +628,9 @@
retry:
/* HC Reset requires max 10 us delay */
ohci_writel (ohci, OHCI_HCR, &ohci->regs->cmdstatus);
- temp = 30; /* ... allow extra time */
+ val = 30; /* ... allow extra time */
while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
- if (--temp == 0) {
+ if (--val == 0) {
spin_unlock_irq (&ohci->lock);
ohci_err (ohci, "USB HC reset timed out!\n");
return -1;
@@ -699,23 +699,23 @@
ohci_writel (ohci, mask, &ohci->regs->intrenable);
/* handle root hub init quirks ... */
- temp = roothub_a (ohci);
- temp &= ~(RH_A_PSM | RH_A_OCPM);
+ val = roothub_a (ohci);
+ val &= ~(RH_A_PSM | RH_A_OCPM);
if (ohci->flags & OHCI_QUIRK_SUPERIO) {
/* NSC 87560 and maybe others */
- temp |= RH_A_NOCP;
- temp &= ~(RH_A_POTPGT | RH_A_NPS);
- ohci_writel (ohci, temp, &ohci->regs->roothub.a);
+ val |= RH_A_NOCP;
+ val &= ~(RH_A_POTPGT | RH_A_NPS);
+ ohci_writel (ohci, val, &ohci->regs->roothub.a);
} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
/* hub power always on; required for AMD-756 and some
* Mac platforms. ganged overcurrent reporting, if any.
*/
- temp |= RH_A_NPS;
- ohci_writel (ohci, temp, &ohci->regs->roothub.a);
+ val |= RH_A_NPS;
+ ohci_writel (ohci, val, &ohci->regs->roothub.a);
}
ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
- ohci_writel (ohci, (temp & RH_A_NPS) ? 0 : RH_B_PPCM,
+ ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM,
&ohci->regs->roothub.b);
// flush those writes
(void) ohci_readl (ohci, &ohci->regs->control);
@@ -724,7 +724,7 @@
spin_unlock_irq (&ohci->lock);
// POTPGT delay is bits 24-31, in 2 ms units.
- mdelay ((temp >> 23) & 0x1fe);
+ mdelay ((val >> 23) & 0x1fe);
hcd->state = HC_STATE_RUNNING;
if (quirk_zfmicro(ohci)) {
@@ -1105,7 +1105,7 @@
set_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
#ifdef DEBUG
- ohci_debug_root = debugfs_create_dir("ohci", NULL);
+ ohci_debug_root = debugfs_create_dir("ohci", usb_debug_root);
if (!ohci_debug_root) {
retval = -ENOENT;
goto error_debug;
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index f9961b4..d2ba04d 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -372,7 +372,7 @@
#ifdef CONFIG_PM
-static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
+static int ohci_pci_suspend(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;
@@ -394,10 +394,6 @@
ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
(void)ohci_readl(ohci, &ohci->regs->intrdisable);
- /* make sure snapshot being resumed re-enumerates everything */
- if (message.event == PM_EVENT_PRETHAW)
- ohci_usb_reset(ohci);
-
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
bail:
spin_unlock_irqrestore (&ohci->lock, flags);
@@ -406,9 +402,14 @@
}
-static int ohci_pci_resume (struct usb_hcd *hcd)
+static int ohci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ /* Make sure resume from hibernation re-enumerates everything */
+ if (hibernated)
+ ohci_usb_reset(hcd_to_ohci(hcd));
+
ohci_finish_controller_resume(hcd);
return 0;
}
@@ -484,12 +485,11 @@
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
-
-#ifdef CONFIG_PM
- .suspend = usb_hcd_pci_suspend,
- .resume = usb_hcd_pci_resume,
-#endif
-
.shutdown = usb_hcd_pci_shutdown,
-};
+#ifdef CONFIG_PM_SLEEP
+ .driver = {
+ .pm = &usb_hcd_pci_pm_ops
+ },
+#endif
+};
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 033c284..83b5f9c 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/acpi.h>
#include "pci-quirks.h"
+#include "xhci-ext-caps.h"
#define UHCI_USBLEGSUP 0xc0 /* legacy support */
@@ -341,7 +342,127 @@
return;
}
+/*
+ * handshake - spin reading a register until handshake completes
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @wait_usec: timeout in microseconds
+ * @delay_usec: delay in microseconds to wait between polling
+ *
+ * Polls a register every delay_usec microseconds.
+ * Returns 0 when the mask bits have the value done.
+ * Returns -ETIMEDOUT if this condition is not true after
+ * wait_usec microseconds have passed.
+ */
+static int handshake(void __iomem *ptr, u32 mask, u32 done,
+ int wait_usec, int delay_usec)
+{
+ u32 result;
+ do {
+ result = readl(ptr);
+ result &= mask;
+ if (result == done)
+ return 0;
+ udelay(delay_usec);
+ wait_usec -= delay_usec;
+ } while (wait_usec > 0);
+ return -ETIMEDOUT;
+}
+
+/**
+ * PCI Quirks for xHCI.
+ *
+ * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS.
+ * It signals to the BIOS that the OS wants control of the host controller,
+ * and then waits 5 seconds for the BIOS to hand over control.
+ * If we timeout, assume the BIOS is broken and take control anyway.
+ */
+static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
+{
+ void __iomem *base;
+ int ext_cap_offset;
+ void __iomem *op_reg_base;
+ u32 val;
+ int timeout;
+
+ if (!mmio_resource_enabled(pdev, 0))
+ return;
+
+ base = ioremap_nocache(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (base == NULL)
+ return;
+
+ /*
+ * Find the Legacy Support Capability register -
+ * this is optional for xHCI host controllers.
+ */
+ ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
+ do {
+ if (!ext_cap_offset)
+ /* We've reached the end of the extended capabilities */
+ goto hc_init;
+ val = readl(base + ext_cap_offset);
+ if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
+ break;
+ ext_cap_offset = xhci_find_next_cap_offset(base, ext_cap_offset);
+ } while (1);
+
+ /* If the BIOS owns the HC, signal that the OS wants it, and wait */
+ if (val & XHCI_HC_BIOS_OWNED) {
+ writel(val & XHCI_HC_OS_OWNED, base + ext_cap_offset);
+
+ /* Wait for 5 seconds with 10 microsecond polling interval */
+ timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED,
+ 0, 5000, 10);
+
+ /* Assume a buggy BIOS and take HC ownership anyway */
+ if (timeout) {
+ dev_warn(&pdev->dev, "xHCI BIOS handoff failed"
+ " (BIOS bug ?) %08x\n", val);
+ writel(val & ~XHCI_HC_BIOS_OWNED, base + ext_cap_offset);
+ }
+ }
+
+ /* Disable any BIOS SMIs */
+ writel(XHCI_LEGACY_DISABLE_SMI,
+ base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+
+hc_init:
+ op_reg_base = base + XHCI_HC_LENGTH(readl(base));
+
+ /* Wait for the host controller to be ready before writing any
+ * operational or runtime registers. Wait 5 seconds and no more.
+ */
+ timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0,
+ 5000, 10);
+ /* Assume a buggy HC and start HC initialization anyway */
+ if (timeout) {
+ val = readl(op_reg_base + XHCI_STS_OFFSET);
+ dev_warn(&pdev->dev,
+ "xHCI HW not ready after 5 sec (HC bug?) "
+ "status = 0x%x\n", val);
+ }
+
+ /* Send the halt and disable interrupts command */
+ val = readl(op_reg_base + XHCI_CMD_OFFSET);
+ val &= ~(XHCI_CMD_RUN | XHCI_IRQS);
+ writel(val, op_reg_base + XHCI_CMD_OFFSET);
+
+ /* Wait for the HC to halt - poll every 125 usec (one microframe). */
+ timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_HALT, 1,
+ XHCI_MAX_HALT_USEC, 125);
+ if (timeout) {
+ val = readl(op_reg_base + XHCI_STS_OFFSET);
+ dev_warn(&pdev->dev,
+ "xHCI HW did not halt within %d usec "
+ "status = 0x%x\n", XHCI_MAX_HALT_USEC, val);
+ }
+
+ iounmap(base);
+}
static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
{
@@ -351,5 +472,7 @@
quirk_usb_handoff_ohci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
quirk_usb_disable_ehci(pdev);
+ else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
+ quirk_usb_handoff_xhci(pdev);
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index f1626e5..56976cc 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -46,31 +46,10 @@
MODULE_AUTHOR("Yoshihiro Shimoda");
MODULE_ALIAS("platform:r8a66597_hcd");
-#define DRIVER_VERSION "10 Apr 2008"
+#define DRIVER_VERSION "2009-05-26"
static const char hcd_name[] = "r8a66597_hcd";
-/* module parameters */
-#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-static unsigned short clock = XTAL12;
-module_param(clock, ushort, 0644);
-MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 "
- "(default=0)");
-#endif
-
-static unsigned short vif = LDRV;
-module_param(vif, ushort, 0644);
-MODULE_PARM_DESC(vif, "input VIF: 3.3V=32768, 1.5V=0(default=32768)");
-
-static unsigned short endian;
-module_param(endian, ushort, 0644);
-MODULE_PARM_DESC(endian, "data endian: big=256, little=0 (default=0)");
-
-static unsigned short irq_sense = 0xff;
-module_param(irq_sense, ushort, 0644);
-MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=32, falling edge=0 "
- "(default=32)");
-
static void packet_write(struct r8a66597 *r8a66597, u16 pipenum);
static int r8a66597_get_frame(struct usb_hcd *hcd);
@@ -136,7 +115,8 @@
}
} while ((tmp & USBE) != USBE);
r8a66597_bclr(r8a66597, USBE, SYSCFG0);
- r8a66597_mdfy(r8a66597, clock, XTAL, SYSCFG0);
+ r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata), XTAL,
+ SYSCFG0);
i = 0;
r8a66597_bset(r8a66597, XCKE, SYSCFG0);
@@ -203,6 +183,9 @@
static int enable_controller(struct r8a66597 *r8a66597)
{
int ret, port;
+ u16 vif = r8a66597->pdata->vif ? LDRV : 0;
+ u16 irq_sense = r8a66597->irq_sense_low ? INTL : 0;
+ u16 endian = r8a66597->pdata->endian ? BIGEND : 0;
ret = r8a66597_clock_enable(r8a66597);
if (ret < 0)
@@ -2373,7 +2356,7 @@
return 0;
}
-static int __init r8a66597_probe(struct platform_device *pdev)
+static int __devinit r8a66597_probe(struct platform_device *pdev)
{
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
char clk_name[8];
@@ -2418,6 +2401,12 @@
goto clean_up;
}
+ if (pdev->dev.platform_data == NULL) {
+ dev_err(&pdev->dev, "no platform data\n");
+ ret = -ENODEV;
+ goto clean_up;
+ }
+
/* initialize hcd */
hcd = usb_create_hcd(&r8a66597_hc_driver, &pdev->dev, (char *)hcd_name);
if (!hcd) {
@@ -2428,6 +2417,8 @@
r8a66597 = hcd_to_r8a66597(hcd);
memset(r8a66597, 0, sizeof(struct r8a66597));
dev_set_drvdata(&pdev->dev, r8a66597);
+ r8a66597->pdata = pdev->dev.platform_data;
+ r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
@@ -2458,29 +2449,6 @@
hcd->rsrc_start = res->start;
- /* irq_sense setting on cmdline takes precedence over resource
- * settings, so the introduction of irqflags in IRQ resourse
- * won't disturb existing setups */
- switch (irq_sense) {
- case INTL:
- irq_trigger = IRQF_TRIGGER_LOW;
- break;
- case 0:
- irq_trigger = IRQF_TRIGGER_FALLING;
- break;
- case 0xff:
- if (irq_trigger)
- irq_sense = (irq_trigger & IRQF_TRIGGER_LOW) ?
- INTL : 0;
- else {
- irq_sense = INTL;
- irq_trigger = IRQF_TRIGGER_LOW;
- }
- break;
- default:
- dev_err(&pdev->dev, "Unknown irq_sense value.\n");
- }
-
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to add hcd\n");
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index f49208f..d72680b 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -30,6 +30,8 @@
#include <linux/clk.h>
#endif
+#include <linux/usb/r8a66597.h>
+
#define SYSCFG0 0x00
#define SYSCFG1 0x02
#define SYSSTS0 0x04
@@ -488,6 +490,7 @@
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
struct clk *clk;
#endif
+ struct r8a66597_platdata *pdata;
struct r8a66597_device device0;
struct r8a66597_root_hub root_hub[R8A66597_MAX_ROOT_HUB];
struct list_head pipe_queue[R8A66597_MAX_NUM_PIPE];
@@ -506,6 +509,7 @@
unsigned long child_connect_map[4];
unsigned bus_suspended:1;
+ unsigned irq_sense_low:1;
};
static inline struct r8a66597 *hcd_to_r8a66597(struct usb_hcd *hcd)
@@ -660,10 +664,36 @@
{
unsigned long dvstctr_reg = get_dvstctr_reg(port);
- if (power)
- r8a66597_bset(r8a66597, VBOUT, dvstctr_reg);
- else
- r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg);
+ if (r8a66597->pdata->port_power) {
+ r8a66597->pdata->port_power(port, power);
+ } else {
+ if (power)
+ r8a66597_bset(r8a66597, VBOUT, dvstctr_reg);
+ else
+ r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg);
+ }
+}
+
+static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata)
+{
+ u16 clock = 0;
+
+ switch (pdata->xtal) {
+ case R8A66597_PLATDATA_XTAL_12MHZ:
+ clock = XTAL12;
+ break;
+ case R8A66597_PLATDATA_XTAL_24MHZ:
+ clock = XTAL24;
+ break;
+ case R8A66597_PLATDATA_XTAL_48MHZ:
+ clock = XTAL48;
+ break;
+ default:
+ printk(KERN_ERR "r8a66597: platdata clock is wrong.\n");
+ break;
+ }
+
+ return clock;
}
#define get_pipectr_addr(pipenum) (PIPE1CTR + (pipenum - 1) * 2)
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index cf5e4cf..274751b 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -769,7 +769,7 @@
return rc;
}
-static int uhci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
+static int uhci_pci_suspend(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int rc = 0;
@@ -795,10 +795,6 @@
/* FIXME: Enable non-PME# remote wakeup? */
- /* make sure snapshot being resumed re-enumerates everything */
- if (message.event == PM_EVENT_PRETHAW)
- uhci_hc_died(uhci);
-
done_okay:
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
done:
@@ -806,7 +802,7 @@
return rc;
}
-static int uhci_pci_resume(struct usb_hcd *hcd)
+static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
@@ -820,6 +816,10 @@
spin_lock_irq(&uhci->lock);
+ /* Make sure resume from hibernation re-enumerates everything */
+ if (hibernated)
+ uhci_hc_died(uhci);
+
/* FIXME: Disable non-PME# remote wakeup? */
/* The firmware or a boot kernel may have changed the controller
@@ -940,10 +940,11 @@
.remove = usb_hcd_pci_remove,
.shutdown = uhci_shutdown,
-#ifdef CONFIG_PM
- .suspend = usb_hcd_pci_suspend,
- .resume = usb_hcd_pci_resume,
-#endif /* PM */
+#ifdef CONFIG_PM_SLEEP
+ .driver = {
+ .pm = &usb_hcd_pci_pm_ops
+ },
+#endif
};
static int __init uhci_hcd_init(void)
@@ -961,7 +962,7 @@
errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL);
if (!errbuf)
goto errbuf_failed;
- uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
+ uhci_debugfs_root = debugfs_create_dir("uhci", usb_debug_root);
if (!uhci_debugfs_root)
goto debug_failed;
}
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 3e5807d..64e57bf 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -260,7 +260,7 @@
INIT_LIST_HEAD(&qh->node);
if (udev) { /* Normal QH */
- qh->type = hep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ qh->type = usb_endpoint_type(&hep->desc);
if (qh->type != USB_ENDPOINT_XFER_ISOC) {
qh->dummy_td = uhci_alloc_td(uhci);
if (!qh->dummy_td) {
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
new file mode 100644
index 0000000..2501c57
--- /dev/null
+++ b/drivers/usb/host/xhci-dbg.c
@@ -0,0 +1,485 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "xhci.h"
+
+#define XHCI_INIT_VALUE 0x0
+
+/* Add verbose debugging later, just print everything for now */
+
+void xhci_dbg_regs(struct xhci_hcd *xhci)
+{
+ u32 temp;
+
+ xhci_dbg(xhci, "// xHCI capability registers at %p:\n",
+ xhci->cap_regs);
+ temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+ xhci_dbg(xhci, "// @%p = 0x%x (CAPLENGTH AND HCIVERSION)\n",
+ &xhci->cap_regs->hc_capbase, temp);
+ xhci_dbg(xhci, "// CAPLENGTH: 0x%x\n",
+ (unsigned int) HC_LENGTH(temp));
+#if 0
+ xhci_dbg(xhci, "// HCIVERSION: 0x%x\n",
+ (unsigned int) HC_VERSION(temp));
+#endif
+
+ xhci_dbg(xhci, "// xHCI operational registers at %p:\n", xhci->op_regs);
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->run_regs_off);
+ xhci_dbg(xhci, "// @%p = 0x%x RTSOFF\n",
+ &xhci->cap_regs->run_regs_off,
+ (unsigned int) temp & RTSOFF_MASK);
+ xhci_dbg(xhci, "// xHCI runtime registers at %p:\n", xhci->run_regs);
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->db_off);
+ xhci_dbg(xhci, "// @%p = 0x%x DBOFF\n", &xhci->cap_regs->db_off, temp);
+ xhci_dbg(xhci, "// Doorbell array at %p:\n", xhci->dba);
+}
+
+static void xhci_print_cap_regs(struct xhci_hcd *xhci)
+{
+ u32 temp;
+
+ xhci_dbg(xhci, "xHCI capability registers at %p:\n", xhci->cap_regs);
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+ xhci_dbg(xhci, "CAPLENGTH AND HCIVERSION 0x%x:\n",
+ (unsigned int) temp);
+ xhci_dbg(xhci, "CAPLENGTH: 0x%x\n",
+ (unsigned int) HC_LENGTH(temp));
+ xhci_dbg(xhci, "HCIVERSION: 0x%x\n",
+ (unsigned int) HC_VERSION(temp));
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
+ xhci_dbg(xhci, "HCSPARAMS 1: 0x%x\n",
+ (unsigned int) temp);
+ xhci_dbg(xhci, " Max device slots: %u\n",
+ (unsigned int) HCS_MAX_SLOTS(temp));
+ xhci_dbg(xhci, " Max interrupters: %u\n",
+ (unsigned int) HCS_MAX_INTRS(temp));
+ xhci_dbg(xhci, " Max ports: %u\n",
+ (unsigned int) HCS_MAX_PORTS(temp));
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
+ xhci_dbg(xhci, "HCSPARAMS 2: 0x%x\n",
+ (unsigned int) temp);
+ xhci_dbg(xhci, " Isoc scheduling threshold: %u\n",
+ (unsigned int) HCS_IST(temp));
+ xhci_dbg(xhci, " Maximum allowed segments in event ring: %u\n",
+ (unsigned int) HCS_ERST_MAX(temp));
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+ xhci_dbg(xhci, "HCSPARAMS 3 0x%x:\n",
+ (unsigned int) temp);
+ xhci_dbg(xhci, " Worst case U1 device exit latency: %u\n",
+ (unsigned int) HCS_U1_LATENCY(temp));
+ xhci_dbg(xhci, " Worst case U2 device exit latency: %u\n",
+ (unsigned int) HCS_U2_LATENCY(temp));
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+ xhci_dbg(xhci, "HCC PARAMS 0x%x:\n", (unsigned int) temp);
+ xhci_dbg(xhci, " HC generates %s bit addresses\n",
+ HCC_64BIT_ADDR(temp) ? "64" : "32");
+ /* FIXME */
+ xhci_dbg(xhci, " FIXME: more HCCPARAMS debugging\n");
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->run_regs_off);
+ xhci_dbg(xhci, "RTSOFF 0x%x:\n", temp & RTSOFF_MASK);
+}
+
+static void xhci_print_command_reg(struct xhci_hcd *xhci)
+{
+ u32 temp;
+
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ xhci_dbg(xhci, "USBCMD 0x%x:\n", temp);
+ xhci_dbg(xhci, " HC is %s\n",
+ (temp & CMD_RUN) ? "running" : "being stopped");
+ xhci_dbg(xhci, " HC has %sfinished hard reset\n",
+ (temp & CMD_RESET) ? "not " : "");
+ xhci_dbg(xhci, " Event Interrupts %s\n",
+ (temp & CMD_EIE) ? "enabled " : "disabled");
+ xhci_dbg(xhci, " Host System Error Interrupts %s\n",
+ (temp & CMD_EIE) ? "enabled " : "disabled");
+ xhci_dbg(xhci, " HC has %sfinished light reset\n",
+ (temp & CMD_LRESET) ? "not " : "");
+}
+
+static void xhci_print_status(struct xhci_hcd *xhci)
+{
+ u32 temp;
+
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ xhci_dbg(xhci, "USBSTS 0x%x:\n", temp);
+ xhci_dbg(xhci, " Event ring is %sempty\n",
+ (temp & STS_EINT) ? "not " : "");
+ xhci_dbg(xhci, " %sHost System Error\n",
+ (temp & STS_FATAL) ? "WARNING: " : "No ");
+ xhci_dbg(xhci, " HC is %s\n",
+ (temp & STS_HALT) ? "halted" : "running");
+}
+
+static void xhci_print_op_regs(struct xhci_hcd *xhci)
+{
+ xhci_dbg(xhci, "xHCI operational registers at %p:\n", xhci->op_regs);
+ xhci_print_command_reg(xhci);
+ xhci_print_status(xhci);
+}
+
+static void xhci_print_ports(struct xhci_hcd *xhci)
+{
+ u32 __iomem *addr;
+ int i, j;
+ int ports;
+ char *names[NUM_PORT_REGS] = {
+ "status",
+ "power",
+ "link",
+ "reserved",
+ };
+
+ ports = HCS_MAX_PORTS(xhci->hcs_params1);
+ addr = &xhci->op_regs->port_status_base;
+ for (i = 0; i < ports; i++) {
+ for (j = 0; j < NUM_PORT_REGS; ++j) {
+ xhci_dbg(xhci, "%p port %s reg = 0x%x\n",
+ addr, names[j],
+ (unsigned int) xhci_readl(xhci, addr));
+ addr++;
+ }
+ }
+}
+
+void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num)
+{
+ void *addr;
+ u32 temp;
+
+ addr = &ir_set->irq_pending;
+ temp = xhci_readl(xhci, addr);
+ if (temp == XHCI_INIT_VALUE)
+ return;
+
+ xhci_dbg(xhci, " %p: ir_set[%i]\n", ir_set, set_num);
+
+ xhci_dbg(xhci, " %p: ir_set.pending = 0x%x\n", addr,
+ (unsigned int)temp);
+
+ addr = &ir_set->irq_control;
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.control = 0x%x\n", addr,
+ (unsigned int)temp);
+
+ addr = &ir_set->erst_size;
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_size = 0x%x\n", addr,
+ (unsigned int)temp);
+
+ addr = &ir_set->rsvd;
+ temp = xhci_readl(xhci, addr);
+ if (temp != XHCI_INIT_VALUE)
+ xhci_dbg(xhci, " WARN: %p: ir_set.rsvd = 0x%x\n",
+ addr, (unsigned int)temp);
+
+ addr = &ir_set->erst_base[0];
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_base[0] = 0x%x\n",
+ addr, (unsigned int) temp);
+
+ addr = &ir_set->erst_base[1];
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_base[1] = 0x%x\n",
+ addr, (unsigned int) temp);
+
+ addr = &ir_set->erst_dequeue[0];
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_dequeue[0] = 0x%x\n",
+ addr, (unsigned int) temp);
+
+ addr = &ir_set->erst_dequeue[1];
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_dequeue[1] = 0x%x\n",
+ addr, (unsigned int) temp);
+}
+
+void xhci_print_run_regs(struct xhci_hcd *xhci)
+{
+ u32 temp;
+ int i;
+
+ xhci_dbg(xhci, "xHCI runtime registers at %p:\n", xhci->run_regs);
+ temp = xhci_readl(xhci, &xhci->run_regs->microframe_index);
+ xhci_dbg(xhci, " %p: Microframe index = 0x%x\n",
+ &xhci->run_regs->microframe_index,
+ (unsigned int) temp);
+ for (i = 0; i < 7; ++i) {
+ temp = xhci_readl(xhci, &xhci->run_regs->rsvd[i]);
+ if (temp != XHCI_INIT_VALUE)
+ xhci_dbg(xhci, " WARN: %p: Rsvd[%i] = 0x%x\n",
+ &xhci->run_regs->rsvd[i],
+ i, (unsigned int) temp);
+ }
+}
+
+void xhci_print_registers(struct xhci_hcd *xhci)
+{
+ xhci_print_cap_regs(xhci);
+ xhci_print_op_regs(xhci);
+ xhci_print_ports(xhci);
+}
+
+void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb)
+{
+ int i;
+ for (i = 0; i < 4; ++i)
+ xhci_dbg(xhci, "Offset 0x%x = 0x%x\n",
+ i*4, trb->generic.field[i]);
+}
+
+/**
+ * Debug a transfer request block (TRB).
+ */
+void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
+{
+ u64 address;
+ u32 type = xhci_readl(xhci, &trb->link.control) & TRB_TYPE_BITMASK;
+
+ switch (type) {
+ case TRB_TYPE(TRB_LINK):
+ xhci_dbg(xhci, "Link TRB:\n");
+ xhci_print_trb_offsets(xhci, trb);
+
+ address = trb->link.segment_ptr[0] +
+ (((u64) trb->link.segment_ptr[1]) << 32);
+ xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
+
+ xhci_dbg(xhci, "Interrupter target = 0x%x\n",
+ GET_INTR_TARGET(trb->link.intr_target));
+ xhci_dbg(xhci, "Cycle bit = %u\n",
+ (unsigned int) (trb->link.control & TRB_CYCLE));
+ xhci_dbg(xhci, "Toggle cycle bit = %u\n",
+ (unsigned int) (trb->link.control & LINK_TOGGLE));
+ xhci_dbg(xhci, "No Snoop bit = %u\n",
+ (unsigned int) (trb->link.control & TRB_NO_SNOOP));
+ break;
+ case TRB_TYPE(TRB_TRANSFER):
+ address = trb->trans_event.buffer[0] +
+ (((u64) trb->trans_event.buffer[1]) << 32);
+ /*
+ * FIXME: look at flags to figure out if it's an address or if
+ * the data is directly in the buffer field.
+ */
+ xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address);
+ break;
+ case TRB_TYPE(TRB_COMPLETION):
+ address = trb->event_cmd.cmd_trb[0] +
+ (((u64) trb->event_cmd.cmd_trb[1]) << 32);
+ xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
+ xhci_dbg(xhci, "Completion status = %u\n",
+ (unsigned int) GET_COMP_CODE(trb->event_cmd.status));
+ xhci_dbg(xhci, "Flags = 0x%x\n", (unsigned int) trb->event_cmd.flags);
+ break;
+ default:
+ xhci_dbg(xhci, "Unknown TRB with TRB type ID %u\n",
+ (unsigned int) type>>10);
+ xhci_print_trb_offsets(xhci, trb);
+ break;
+ }
+}
+
+/**
+ * Debug a segment with an xHCI ring.
+ *
+ * @return The Link TRB of the segment, or NULL if there is no Link TRB
+ * (which is a bug, since all segments must have a Link TRB).
+ *
+ * Prints out all TRBs in the segment, even those after the Link TRB.
+ *
+ * XXX: should we print out TRBs that the HC owns? As long as we don't
+ * write, that should be fine... We shouldn't expect that the memory pointed to
+ * by the TRB is valid at all. Do we care about ones the HC owns? Probably,
+ * for HC debugging.
+ */
+void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg)
+{
+ int i;
+ u32 addr = (u32) seg->dma;
+ union xhci_trb *trb = seg->trbs;
+
+ for (i = 0; i < TRBS_PER_SEGMENT; ++i) {
+ trb = &seg->trbs[i];
+ xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n", addr,
+ (unsigned int) trb->link.segment_ptr[0],
+ (unsigned int) trb->link.segment_ptr[1],
+ (unsigned int) trb->link.intr_target,
+ (unsigned int) trb->link.control);
+ addr += sizeof(*trb);
+ }
+}
+
+void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+ xhci_dbg(xhci, "Ring deq = %p (virt), 0x%llx (dma)\n",
+ ring->dequeue,
+ (unsigned long long)xhci_trb_virt_to_dma(ring->deq_seg,
+ ring->dequeue));
+ xhci_dbg(xhci, "Ring deq updated %u times\n",
+ ring->deq_updates);
+ xhci_dbg(xhci, "Ring enq = %p (virt), 0x%llx (dma)\n",
+ ring->enqueue,
+ (unsigned long long)xhci_trb_virt_to_dma(ring->enq_seg,
+ ring->enqueue));
+ xhci_dbg(xhci, "Ring enq updated %u times\n",
+ ring->enq_updates);
+}
+
+/**
+ * Debugging for an xHCI ring, which is a queue broken into multiple segments.
+ *
+ * Print out each segment in the ring. Check that the DMA address in
+ * each link segment actually matches the segment's stored DMA address.
+ * Check that the link end bit is only set at the end of the ring.
+ * Check that the dequeue and enqueue pointers point to real data in this ring
+ * (not some other ring).
+ */
+void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+ /* FIXME: Throw an error if any segment doesn't have a Link TRB */
+ struct xhci_segment *seg;
+ struct xhci_segment *first_seg = ring->first_seg;
+ xhci_debug_segment(xhci, first_seg);
+
+ if (!ring->enq_updates && !ring->deq_updates) {
+ xhci_dbg(xhci, " Ring has not been updated\n");
+ return;
+ }
+ for (seg = first_seg->next; seg != first_seg; seg = seg->next)
+ xhci_debug_segment(xhci, seg);
+}
+
+void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
+{
+ u32 addr = (u32) erst->erst_dma_addr;
+ int i;
+ struct xhci_erst_entry *entry;
+
+ for (i = 0; i < erst->num_entries; ++i) {
+ entry = &erst->entries[i];
+ xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n",
+ (unsigned int) addr,
+ (unsigned int) entry->seg_addr[0],
+ (unsigned int) entry->seg_addr[1],
+ (unsigned int) entry->seg_size,
+ (unsigned int) entry->rsvd);
+ addr += sizeof(*entry);
+ }
+}
+
+void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci)
+{
+ u32 val;
+
+ val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
+ xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = 0x%x\n", val);
+ val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[1]);
+ xhci_dbg(xhci, "// xHC command ring deq ptr high bits = 0x%x\n", val);
+}
+
+void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep)
+{
+ int i, j;
+ int last_ep_ctx = 31;
+ /* Fields are 32 bits wide, DMA addresses are in bytes */
+ int field_size = 32 / 8;
+
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
+ &ctx->drop_flags, (unsigned long long)dma,
+ ctx->drop_flags);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
+ &ctx->add_flags, (unsigned long long)dma,
+ ctx->add_flags);
+ dma += field_size;
+ for (i = 0; i > 6; ++i) {
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
+ &ctx->rsvd[i], (unsigned long long)dma,
+ ctx->rsvd[i], i);
+ dma += field_size;
+ }
+
+ xhci_dbg(xhci, "Slot Context:\n");
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n",
+ &ctx->slot.dev_info,
+ (unsigned long long)dma, ctx->slot.dev_info);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n",
+ &ctx->slot.dev_info2,
+ (unsigned long long)dma, ctx->slot.dev_info2);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n",
+ &ctx->slot.tt_info,
+ (unsigned long long)dma, ctx->slot.tt_info);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n",
+ &ctx->slot.dev_state,
+ (unsigned long long)dma, ctx->slot.dev_state);
+ dma += field_size;
+ for (i = 0; i > 4; ++i) {
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
+ &ctx->slot.reserved[i], (unsigned long long)dma,
+ ctx->slot.reserved[i], i);
+ dma += field_size;
+ }
+
+ if (last_ep < 31)
+ last_ep_ctx = last_ep + 1;
+ for (i = 0; i < last_ep_ctx; ++i) {
+ xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
+ &ctx->ep[i].ep_info,
+ (unsigned long long)dma, ctx->ep[i].ep_info);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info2\n",
+ &ctx->ep[i].ep_info2,
+ (unsigned long long)dma, ctx->ep[i].ep_info2);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[0]\n",
+ &ctx->ep[i].deq[0],
+ (unsigned long long)dma, ctx->ep[i].deq[0]);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[1]\n",
+ &ctx->ep[i].deq[1],
+ (unsigned long long)dma, ctx->ep[i].deq[1]);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n",
+ &ctx->ep[i].tx_info,
+ (unsigned long long)dma, ctx->ep[i].tx_info);
+ dma += field_size;
+ for (j = 0; j < 3; ++j) {
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
+ &ctx->ep[i].reserved[j],
+ (unsigned long long)dma,
+ ctx->ep[i].reserved[j], j);
+ dma += field_size;
+ }
+ }
+}
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
new file mode 100644
index 0000000..ecc131c
--- /dev/null
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -0,0 +1,145 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+/* Up to 16 microframes to halt an HC - one microframe is 125 microsectonds */
+#define XHCI_MAX_HALT_USEC (16*125)
+/* HC not running - set to 1 when run/stop bit is cleared. */
+#define XHCI_STS_HALT (1<<0)
+
+/* HCCPARAMS offset from PCI base address */
+#define XHCI_HCC_PARAMS_OFFSET 0x10
+/* HCCPARAMS contains the first extended capability pointer */
+#define XHCI_HCC_EXT_CAPS(p) (((p)>>16)&0xffff)
+
+/* Command and Status registers offset from the Operational Registers address */
+#define XHCI_CMD_OFFSET 0x00
+#define XHCI_STS_OFFSET 0x04
+
+#define XHCI_MAX_EXT_CAPS 50
+
+/* Capability Register */
+/* bits 7:0 - how long is the Capabilities register */
+#define XHCI_HC_LENGTH(p) (((p)>>00)&0x00ff)
+
+/* Extended capability register fields */
+#define XHCI_EXT_CAPS_ID(p) (((p)>>0)&0xff)
+#define XHCI_EXT_CAPS_NEXT(p) (((p)>>8)&0xff)
+#define XHCI_EXT_CAPS_VAL(p) ((p)>>16)
+/* Extended capability IDs - ID 0 reserved */
+#define XHCI_EXT_CAPS_LEGACY 1
+#define XHCI_EXT_CAPS_PROTOCOL 2
+#define XHCI_EXT_CAPS_PM 3
+#define XHCI_EXT_CAPS_VIRT 4
+#define XHCI_EXT_CAPS_ROUTE 5
+/* IDs 6-9 reserved */
+#define XHCI_EXT_CAPS_DEBUG 10
+/* USB Legacy Support Capability - section 7.1.1 */
+#define XHCI_HC_BIOS_OWNED (1 << 16)
+#define XHCI_HC_OS_OWNED (1 << 24)
+
+/* USB Legacy Support Capability - section 7.1.1 */
+/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
+#define XHCI_LEGACY_SUPPORT_OFFSET (0x00)
+
+/* USB Legacy Support Control and Status Register - section 7.1.2 */
+/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
+#define XHCI_LEGACY_CONTROL_OFFSET (0x04)
+/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define XHCI_LEGACY_DISABLE_SMI ((0x3 << 1) + (0xff << 5) + (0x7 << 17))
+
+/* command register values to disable interrupts and halt the HC */
+/* start/stop HC execution - do not write unless HC is halted*/
+#define XHCI_CMD_RUN (1 << 0)
+/* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */
+#define XHCI_CMD_EIE (1 << 2)
+/* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */
+#define XHCI_CMD_HSEIE (1 << 3)
+/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
+#define XHCI_CMD_EWE (1 << 10)
+
+#define XHCI_IRQS (XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE)
+
+/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
+#define XHCI_STS_CNR (1 << 11)
+
+#include <linux/io.h>
+
+/**
+ * Return the next extended capability pointer register.
+ *
+ * @base PCI register base address.
+ *
+ * @ext_offset Offset of the 32-bit register that contains the extended
+ * capabilites pointer. If searching for the first extended capability, pass
+ * in XHCI_HCC_PARAMS_OFFSET. If searching for the next extended capability,
+ * pass in the offset of the current extended capability register.
+ *
+ * Returns 0 if there is no next extended capability register or returns the register offset
+ * from the PCI registers base address.
+ */
+static inline int xhci_find_next_cap_offset(void __iomem *base, int ext_offset)
+{
+ u32 next;
+
+ next = readl(base + ext_offset);
+
+ if (ext_offset == XHCI_HCC_PARAMS_OFFSET)
+ /* Find the first extended capability */
+ next = XHCI_HCC_EXT_CAPS(next);
+ else
+ /* Find the next extended capability */
+ next = XHCI_EXT_CAPS_NEXT(next);
+ if (!next)
+ return 0;
+ /*
+ * Address calculation from offset of extended capabilities
+ * (or HCCPARAMS) register - see section 5.3.6 and section 7.
+ */
+ return ext_offset + (next << 2);
+}
+
+/**
+ * Find the offset of the extended capabilities with capability ID id.
+ *
+ * @base PCI MMIO registers base address.
+ * @ext_offset Offset from base of the first extended capability to look at,
+ * or the address of HCCPARAMS.
+ * @id Extended capability ID to search for.
+ *
+ * This uses an arbitrary limit of XHCI_MAX_EXT_CAPS extended capabilities
+ * to make sure that the list doesn't contain a loop.
+ */
+static inline int xhci_find_ext_cap_by_id(void __iomem *base, int ext_offset, int id)
+{
+ u32 val;
+ int limit = XHCI_MAX_EXT_CAPS;
+
+ while (ext_offset && limit > 0) {
+ val = readl(base + ext_offset);
+ if (XHCI_EXT_CAPS_ID(val) == id)
+ break;
+ ext_offset = xhci_find_next_cap_offset(base, ext_offset);
+ limit--;
+ }
+ if (limit > 0)
+ return ext_offset;
+ return 0;
+}
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
new file mode 100644
index 0000000..dba3e07
--- /dev/null
+++ b/drivers/usb/host/xhci-hcd.c
@@ -0,0 +1,1274 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include "xhci.h"
+
+#define DRIVER_AUTHOR "Sarah Sharp"
+#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+
+/* TODO: copied from ehci-hcd.c - can this be refactored? */
+/*
+ * handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done). There are two failure modes: "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ */
+static int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+ u32 mask, u32 done, int usec)
+{
+ u32 result;
+
+ do {
+ result = xhci_readl(xhci, ptr);
+ if (result == ~(u32)0) /* card removed */
+ return -ENODEV;
+ result &= mask;
+ if (result == done)
+ return 0;
+ udelay(1);
+ usec--;
+ } while (usec > 0);
+ return -ETIMEDOUT;
+}
+
+/*
+ * Force HC into halt state.
+ *
+ * Disable any IRQs and clear the run/stop bit.
+ * HC will complete any current and actively pipelined transactions, and
+ * should halt within 16 microframes of the run/stop bit being cleared.
+ * Read HC Halted bit in the status register to see when the HC is finished.
+ * XXX: shouldn't we set HC_STATE_HALT here somewhere?
+ */
+int xhci_halt(struct xhci_hcd *xhci)
+{
+ u32 halted;
+ u32 cmd;
+ u32 mask;
+
+ xhci_dbg(xhci, "// Halt the HC\n");
+ /* Disable all interrupts from the host controller */
+ mask = ~(XHCI_IRQS);
+ halted = xhci_readl(xhci, &xhci->op_regs->status) & STS_HALT;
+ if (!halted)
+ mask &= ~CMD_RUN;
+
+ cmd = xhci_readl(xhci, &xhci->op_regs->command);
+ cmd &= mask;
+ xhci_writel(xhci, cmd, &xhci->op_regs->command);
+
+ return handshake(xhci, &xhci->op_regs->status,
+ STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
+}
+
+/*
+ * Reset a halted HC, and set the internal HC state to HC_STATE_HALT.
+ *
+ * This resets pipelines, timers, counters, state machines, etc.
+ * Transactions will be terminated immediately, and operational registers
+ * will be set to their defaults.
+ */
+int xhci_reset(struct xhci_hcd *xhci)
+{
+ u32 command;
+ u32 state;
+
+ state = xhci_readl(xhci, &xhci->op_regs->status);
+ BUG_ON((state & STS_HALT) == 0);
+
+ xhci_dbg(xhci, "// Reset the HC\n");
+ command = xhci_readl(xhci, &xhci->op_regs->command);
+ command |= CMD_RESET;
+ xhci_writel(xhci, command, &xhci->op_regs->command);
+ /* XXX: Why does EHCI set this here? Shouldn't other code do this? */
+ xhci_to_hcd(xhci)->state = HC_STATE_HALT;
+
+ return handshake(xhci, &xhci->op_regs->command, CMD_RESET, 0, 250 * 1000);
+}
+
+/*
+ * Stop the HC from processing the endpoint queues.
+ */
+static void xhci_quiesce(struct xhci_hcd *xhci)
+{
+ /*
+ * Queues are per endpoint, so we need to disable an endpoint or slot.
+ *
+ * To disable a slot, we need to insert a disable slot command on the
+ * command ring and ring the doorbell. This will also free any internal
+ * resources associated with the slot (which might not be what we want).
+ *
+ * A Release Endpoint command sounds better - doesn't free internal HC
+ * memory, but removes the endpoints from the schedule and releases the
+ * bandwidth, disables the doorbells, and clears the endpoint enable
+ * flag. Usually used prior to a set interface command.
+ *
+ * TODO: Implement after command ring code is done.
+ */
+ BUG_ON(!HC_IS_RUNNING(xhci_to_hcd(xhci)->state));
+ xhci_dbg(xhci, "Finished quiescing -- code not written yet\n");
+}
+
+#if 0
+/* Set up MSI-X table for entry 0 (may claim other entries later) */
+static int xhci_setup_msix(struct xhci_hcd *xhci)
+{
+ int ret;
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+ xhci->msix_count = 0;
+ /* XXX: did I do this right? ixgbe does kcalloc for more than one */
+ xhci->msix_entries = kmalloc(sizeof(struct msix_entry), GFP_KERNEL);
+ if (!xhci->msix_entries) {
+ xhci_err(xhci, "Failed to allocate MSI-X entries\n");
+ return -ENOMEM;
+ }
+ xhci->msix_entries[0].entry = 0;
+
+ ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count);
+ if (ret) {
+ xhci_err(xhci, "Failed to enable MSI-X\n");
+ goto free_entries;
+ }
+
+ /*
+ * Pass the xhci pointer value as the request_irq "cookie".
+ * If more irqs are added, this will need to be unique for each one.
+ */
+ ret = request_irq(xhci->msix_entries[0].vector, &xhci_irq, 0,
+ "xHCI", xhci_to_hcd(xhci));
+ if (ret) {
+ xhci_err(xhci, "Failed to allocate MSI-X interrupt\n");
+ goto disable_msix;
+ }
+ xhci_dbg(xhci, "Finished setting up MSI-X\n");
+ return 0;
+
+disable_msix:
+ pci_disable_msix(pdev);
+free_entries:
+ kfree(xhci->msix_entries);
+ xhci->msix_entries = NULL;
+ return ret;
+}
+
+/* XXX: code duplication; can xhci_setup_msix call this? */
+/* Free any IRQs and disable MSI-X */
+static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+ if (!xhci->msix_entries)
+ return;
+
+ free_irq(xhci->msix_entries[0].vector, xhci);
+ pci_disable_msix(pdev);
+ kfree(xhci->msix_entries);
+ xhci->msix_entries = NULL;
+ xhci_dbg(xhci, "Finished cleaning up MSI-X\n");
+}
+#endif
+
+/*
+ * Initialize memory for HCD and xHC (one-time init).
+ *
+ * Program the PAGESIZE register, initialize the device context array, create
+ * device contexts (?), set up a command ring segment (or two?), create event
+ * ring (one for now).
+ */
+int xhci_init(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int retval = 0;
+
+ xhci_dbg(xhci, "xhci_init\n");
+ spin_lock_init(&xhci->lock);
+ retval = xhci_mem_init(xhci, GFP_KERNEL);
+ xhci_dbg(xhci, "Finished xhci_init\n");
+
+ return retval;
+}
+
+/*
+ * Called in interrupt context when there might be work
+ * queued on the event ring
+ *
+ * xhci->lock must be held by caller.
+ */
+static void xhci_work(struct xhci_hcd *xhci)
+{
+ u32 temp;
+
+ /*
+ * Clear the op reg interrupt status first,
+ * so we can receive interrupts from other MSI-X interrupters.
+ * Write 1 to clear the interrupt status.
+ */
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp |= STS_EINT;
+ xhci_writel(xhci, temp, &xhci->op_regs->status);
+ /* FIXME when MSI-X is supported and there are multiple vectors */
+ /* Clear the MSI-X event interrupt status */
+
+ /* Acknowledge the interrupt */
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ temp |= 0x3;
+ xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
+ /* Flush posted writes */
+ xhci_readl(xhci, &xhci->ir_set->irq_pending);
+
+ /* FIXME this should be a delayed service routine that clears the EHB */
+ xhci_handle_event(xhci);
+
+ /* Clear the event handler busy flag; the event ring should be empty. */
+ temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+ xhci_writel(xhci, temp & ~ERST_EHB, &xhci->ir_set->erst_dequeue[0]);
+ /* Flush posted writes -- FIXME is this necessary? */
+ xhci_readl(xhci, &xhci->ir_set->irq_pending);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * xHCI spec says we can get an interrupt, and if the HC has an error condition,
+ * we might get bad data out of the event ring. Section 4.10.2.7 has a list of
+ * indicators of an event TRB error, but we check the status *first* to be safe.
+ */
+irqreturn_t xhci_irq(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ u32 temp, temp2;
+
+ spin_lock(&xhci->lock);
+ /* Check if the xHC generated the interrupt, or the irq is shared */
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
+ spin_unlock(&xhci->lock);
+ return IRQ_NONE;
+ }
+
+ if (temp & STS_FATAL) {
+ xhci_warn(xhci, "WARNING: Host System Error\n");
+ xhci_halt(xhci);
+ xhci_to_hcd(xhci)->state = HC_STATE_HALT;
+ spin_unlock(&xhci->lock);
+ return -ESHUTDOWN;
+ }
+
+ xhci_work(xhci);
+ spin_unlock(&xhci->lock);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+void xhci_event_ring_work(unsigned long arg)
+{
+ unsigned long flags;
+ int temp;
+ struct xhci_hcd *xhci = (struct xhci_hcd *) arg;
+ int i, j;
+
+ xhci_dbg(xhci, "Poll event ring: %lu\n", jiffies);
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ xhci_dbg(xhci, "op reg status = 0x%x\n", temp);
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp);
+ xhci_dbg(xhci, "No-op commands handled = %d\n", xhci->noops_handled);
+ xhci_dbg(xhci, "HC error bitmask = 0x%x\n", xhci->error_bitmask);
+ xhci->error_bitmask = 0;
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
+ xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+ temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+ temp &= ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
+ xhci_dbg(xhci, "Command ring:\n");
+ xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg);
+ xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+ xhci_dbg_cmd_ptrs(xhci);
+ for (i = 0; i < MAX_HC_SLOTS; ++i) {
+ if (xhci->devs[i]) {
+ for (j = 0; j < 31; ++j) {
+ if (xhci->devs[i]->ep_rings[j]) {
+ xhci_dbg(xhci, "Dev %d endpoint ring %d:\n", i, j);
+ xhci_debug_segment(xhci, xhci->devs[i]->ep_rings[j]->deq_seg);
+ }
+ }
+ }
+ }
+
+ if (xhci->noops_submitted != NUM_TEST_NOOPS)
+ if (xhci_setup_one_noop(xhci))
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ if (!xhci->zombie)
+ mod_timer(&xhci->event_ring_timer, jiffies + POLL_TIMEOUT * HZ);
+ else
+ xhci_dbg(xhci, "Quit polling the event ring.\n");
+}
+#endif
+
+/*
+ * Start the HC after it was halted.
+ *
+ * This function is called by the USB core when the HC driver is added.
+ * Its opposite is xhci_stop().
+ *
+ * xhci_init() must be called once before this function can be called.
+ * Reset the HC, enable device slot contexts, program DCBAAP, and
+ * set command ring pointer and event ring pointer.
+ *
+ * Setup MSI-X vectors and enable interrupts.
+ */
+int xhci_run(struct usb_hcd *hcd)
+{
+ u32 temp;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ void (*doorbell)(struct xhci_hcd *) = NULL;
+
+ hcd->uses_new_polling = 1;
+ hcd->poll_rh = 0;
+
+ xhci_dbg(xhci, "xhci_run\n");
+#if 0 /* FIXME: MSI not setup yet */
+ /* Do this at the very last minute */
+ ret = xhci_setup_msix(xhci);
+ if (!ret)
+ return ret;
+
+ return -ENOSYS;
+#endif
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+ init_timer(&xhci->event_ring_timer);
+ xhci->event_ring_timer.data = (unsigned long) xhci;
+ xhci->event_ring_timer.function = xhci_event_ring_work;
+ /* Poll the event ring */
+ xhci->event_ring_timer.expires = jiffies + POLL_TIMEOUT * HZ;
+ xhci->zombie = 0;
+ xhci_dbg(xhci, "Setting event ring polling timer\n");
+ add_timer(&xhci->event_ring_timer);
+#endif
+
+ xhci_dbg(xhci, "// Set the interrupt modulation register\n");
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
+ temp &= ~ER_IRQ_INTERVAL_MASK;
+ temp |= (u32) 160;
+ xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
+
+ /* Set the HCD state before we enable the irqs */
+ hcd->state = HC_STATE_RUNNING;
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp |= (CMD_EIE);
+ xhci_dbg(xhci, "// Enable interrupts, cmd = 0x%x.\n",
+ temp);
+ xhci_writel(xhci, temp, &xhci->op_regs->command);
+
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci_dbg(xhci, "// Enabling event ring interrupter %p by writing 0x%x to irq_pending\n",
+ xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
+ xhci_writel(xhci, ER_IRQ_ENABLE(temp),
+ &xhci->ir_set->irq_pending);
+ xhci_print_ir_set(xhci, xhci->ir_set, 0);
+
+ if (NUM_TEST_NOOPS > 0)
+ doorbell = xhci_setup_one_noop(xhci);
+
+ xhci_dbg(xhci, "Command ring memory map follows:\n");
+ xhci_debug_ring(xhci, xhci->cmd_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+ xhci_dbg_cmd_ptrs(xhci);
+
+ xhci_dbg(xhci, "ERST memory map follows:\n");
+ xhci_dbg_erst(xhci, &xhci->erst);
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_ring(xhci, xhci->event_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+ temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+ temp &= ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
+ temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[1]);
+ xhci_dbg(xhci, "ERST deq upper = 0x%x\n", temp);
+
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp |= (CMD_RUN);
+ xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
+ temp);
+ xhci_writel(xhci, temp, &xhci->op_regs->command);
+ /* Flush PCI posted writes */
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp);
+ if (doorbell)
+ (*doorbell)(xhci);
+
+ xhci_dbg(xhci, "Finished xhci_run\n");
+ return 0;
+}
+
+/*
+ * Stop xHCI driver.
+ *
+ * This function is called by the USB core when the HC driver is removed.
+ * Its opposite is xhci_run().
+ *
+ * Disable device contexts, disable IRQs, and quiesce the HC.
+ * Reset the HC, finish any completed transactions, and cleanup memory.
+ */
+void xhci_stop(struct usb_hcd *hcd)
+{
+ u32 temp;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ spin_lock_irq(&xhci->lock);
+ if (HC_IS_RUNNING(hcd->state))
+ xhci_quiesce(xhci);
+ xhci_halt(xhci);
+ xhci_reset(xhci);
+ spin_unlock_irq(&xhci->lock);
+
+#if 0 /* No MSI yet */
+ xhci_cleanup_msix(xhci);
+#endif
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+ /* Tell the event ring poll function not to reschedule */
+ xhci->zombie = 1;
+ del_timer_sync(&xhci->event_ring_timer);
+#endif
+
+ xhci_dbg(xhci, "// Disabling event ring interrupts\n");
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci_writel(xhci, ER_IRQ_DISABLE(temp),
+ &xhci->ir_set->irq_pending);
+ xhci_print_ir_set(xhci, xhci->ir_set, 0);
+
+ xhci_dbg(xhci, "cleaning up memory\n");
+ xhci_mem_cleanup(xhci);
+ xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
+ xhci_readl(xhci, &xhci->op_regs->status));
+}
+
+/*
+ * Shutdown HC (not bus-specific)
+ *
+ * This is called when the machine is rebooting or halting. We assume that the
+ * machine will be powered off, and the HC's internal state will be reset.
+ * Don't bother to free memory.
+ */
+void xhci_shutdown(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ spin_lock_irq(&xhci->lock);
+ xhci_halt(xhci);
+ spin_unlock_irq(&xhci->lock);
+
+#if 0
+ xhci_cleanup_msix(xhci);
+#endif
+
+ xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
+ xhci_readl(xhci, &xhci->op_regs->status));
+}
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and
+ * HCDs. Find the index for an endpoint given its descriptor. Use the return
+ * value to right shift 1 for the bitmask.
+ *
+ * Index = (epnum * 2) + direction - 1,
+ * where direction = 0 for OUT, 1 for IN.
+ * For control endpoints, the IN index is used (OUT index is unused), so
+ * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
+ */
+unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc)
+{
+ unsigned int index;
+ if (usb_endpoint_xfer_control(desc))
+ index = (unsigned int) (usb_endpoint_num(desc)*2);
+ else
+ index = (unsigned int) (usb_endpoint_num(desc)*2) +
+ (usb_endpoint_dir_in(desc) ? 1 : 0) - 1;
+ return index;
+}
+
+/* Find the flag for this endpoint (for use in the control context). Use the
+ * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc)
+{
+ return 1 << (xhci_get_endpoint_index(desc) + 1);
+}
+
+/* Compute the last valid endpoint context index. Basically, this is the
+ * endpoint index plus one. For slot contexts with more than valid endpoint,
+ * we find the most significant bit set in the added contexts flags.
+ * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000
+ * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one.
+ */
+static inline unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
+{
+ return fls(added_ctxs) - 1;
+}
+
+/* Returns 1 if the arguments are OK;
+ * returns 0 this is a root hub; returns -EINVAL for NULL pointers.
+ */
+int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep, int check_ep, const char *func) {
+ if (!hcd || (check_ep && !ep) || !udev) {
+ printk(KERN_DEBUG "xHCI %s called with invalid args\n",
+ func);
+ return -EINVAL;
+ }
+ if (!udev->parent) {
+ printk(KERN_DEBUG "xHCI %s called for root hub\n",
+ func);
+ return 0;
+ }
+ if (!udev->slot_id) {
+ printk(KERN_DEBUG "xHCI %s called with unaddressed device\n",
+ func);
+ return -EINVAL;
+ }
+ return 1;
+}
+
+/*
+ * non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ */
+int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ unsigned long flags;
+ int ret = 0;
+ unsigned int slot_id, ep_index;
+
+ if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0)
+ return -EINVAL;
+
+ slot_id = urb->dev->slot_id;
+ ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (!xhci->devs || !xhci->devs[slot_id]) {
+ if (!in_interrupt())
+ dev_warn(&urb->dev->dev, "WARN: urb submitted for dev with no Slot ID\n");
+ ret = -EINVAL;
+ goto exit;
+ }
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!in_interrupt())
+ xhci_dbg(xhci, "urb submitted during PCI suspend\n");
+ ret = -ESHUTDOWN;
+ goto exit;
+ }
+ if (usb_endpoint_xfer_control(&urb->ep->desc))
+ ret = xhci_queue_ctrl_tx(xhci, mem_flags, urb,
+ slot_id, ep_index);
+ else if (usb_endpoint_xfer_bulk(&urb->ep->desc))
+ ret = xhci_queue_bulk_tx(xhci, mem_flags, urb,
+ slot_id, ep_index);
+ else
+ ret = -EINVAL;
+exit:
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return ret;
+}
+
+/*
+ * Remove the URB's TD from the endpoint ring. This may cause the HC to stop
+ * USB transfers, potentially stopping in the middle of a TRB buffer. The HC
+ * should pick up where it left off in the TD, unless a Set Transfer Ring
+ * Dequeue Pointer is issued.
+ *
+ * The TRBs that make up the buffers for the canceled URB will be "removed" from
+ * the ring. Since the ring is a contiguous structure, they can't be physically
+ * removed. Instead, there are two options:
+ *
+ * 1) If the HC is in the middle of processing the URB to be canceled, we
+ * simply move the ring's dequeue pointer past those TRBs using the Set
+ * Transfer Ring Dequeue Pointer command. This will be the common case,
+ * when drivers timeout on the last submitted URB and attempt to cancel.
+ *
+ * 2) If the HC is in the middle of a different TD, we turn the TRBs into a
+ * series of 1-TRB transfer no-op TDs. (No-ops shouldn't be chained.) The
+ * HC will need to invalidate the any TRBs it has cached after the stop
+ * endpoint command, as noted in the xHCI 0.95 errata.
+ *
+ * 3) The TD may have completed by the time the Stop Endpoint Command
+ * completes, so software needs to handle that case too.
+ *
+ * This function should protect against the TD enqueueing code ringing the
+ * doorbell while this code is waiting for a Stop Endpoint command to complete.
+ * It also needs to account for multiple cancellations on happening at the same
+ * time for the same endpoint.
+ *
+ * Note that this function can be called in any context, or so says
+ * usb_hcd_unlink_urb()
+ */
+int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+ unsigned long flags;
+ int ret;
+ struct xhci_hcd *xhci;
+ struct xhci_td *td;
+ unsigned int ep_index;
+ struct xhci_ring *ep_ring;
+
+ xhci = hcd_to_xhci(hcd);
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* Make sure the URB hasn't completed or been unlinked already */
+ ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (ret || !urb->hcpriv)
+ goto done;
+
+ xhci_dbg(xhci, "Cancel URB %p\n", urb);
+ ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+ ep_ring = xhci->devs[urb->dev->slot_id]->ep_rings[ep_index];
+ td = (struct xhci_td *) urb->hcpriv;
+
+ ep_ring->cancels_pending++;
+ list_add_tail(&td->cancelled_td_list, &ep_ring->cancelled_td_list);
+ /* Queue a stop endpoint command, but only if this is
+ * the first cancellation to be handled.
+ */
+ if (ep_ring->cancels_pending == 1) {
+ xhci_queue_stop_endpoint(xhci, urb->dev->slot_id, ep_index);
+ xhci_ring_cmd_db(xhci);
+ }
+done:
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return ret;
+}
+
+/* Drop an endpoint from a new bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint that is being
+ * disabled, so there's no need for mutual exclusion to protect
+ * the xhci->devs[slot_id] structure.
+ */
+int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_device_control *in_ctx;
+ unsigned int last_ctx;
+ unsigned int ep_index;
+ struct xhci_ep_ctx *ep_ctx;
+ u32 drop_flag;
+ u32 new_add_flags, new_drop_flags, new_slot_info;
+ int ret;
+
+ ret = xhci_check_args(hcd, udev, ep, 1, __func__);
+ if (ret <= 0)
+ return ret;
+ xhci = hcd_to_xhci(hcd);
+ xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+
+ drop_flag = xhci_get_endpoint_flag(&ep->desc);
+ if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) {
+ xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",
+ __func__, drop_flag);
+ return 0;
+ }
+
+ if (!xhci->devs || !xhci->devs[udev->slot_id]) {
+ xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+ /* If the HC already knows the endpoint is disabled,
+ * or the HCD has noted it is disabled, ignore this request
+ */
+ if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED ||
+ in_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
+ __func__, ep);
+ return 0;
+ }
+
+ in_ctx->drop_flags |= drop_flag;
+ new_drop_flags = in_ctx->drop_flags;
+
+ in_ctx->add_flags = ~drop_flag;
+ new_add_flags = in_ctx->add_flags;
+
+ last_ctx = xhci_last_valid_endpoint(in_ctx->add_flags);
+ /* Update the last valid endpoint context, if we deleted the last one */
+ if ((in_ctx->slot.dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
+ in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+ in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+ }
+ new_slot_info = in_ctx->slot.dev_info;
+
+ xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+
+ xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
+ (unsigned int) ep->desc.bEndpointAddress,
+ udev->slot_id,
+ (unsigned int) new_drop_flags,
+ (unsigned int) new_add_flags,
+ (unsigned int) new_slot_info);
+ return 0;
+}
+
+/* Add an endpoint to a new possible bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint until the
+ * configuration or alt setting is installed in the device, so there's no need
+ * for mutual exclusion to protect the xhci->devs[slot_id] structure.
+ */
+int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_device_control *in_ctx;
+ unsigned int ep_index;
+ struct xhci_ep_ctx *ep_ctx;
+ u32 added_ctxs;
+ unsigned int last_ctx;
+ u32 new_add_flags, new_drop_flags, new_slot_info;
+ int ret = 0;
+
+ ret = xhci_check_args(hcd, udev, ep, 1, __func__);
+ if (ret <= 0)
+ return ret;
+ xhci = hcd_to_xhci(hcd);
+
+ added_ctxs = xhci_get_endpoint_flag(&ep->desc);
+ last_ctx = xhci_last_valid_endpoint(added_ctxs);
+ if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) {
+ /* FIXME when we have to issue an evaluate endpoint command to
+ * deal with ep0 max packet size changing once we get the
+ * descriptors
+ */
+ xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n",
+ __func__, added_ctxs);
+ return 0;
+ }
+
+ if (!xhci->devs || !xhci->devs[udev->slot_id]) {
+ xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+ /* If the HCD has already noted the endpoint is enabled,
+ * ignore this request.
+ */
+ if (in_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
+ __func__, ep);
+ return 0;
+ }
+
+ /*
+ * Configuration and alternate setting changes must be done in
+ * process context, not interrupt context (or so documenation
+ * for usb_set_interface() and usb_set_configuration() claim).
+ */
+ if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id],
+ udev, ep, GFP_KERNEL) < 0) {
+ dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
+ __func__, ep->desc.bEndpointAddress);
+ return -ENOMEM;
+ }
+
+ in_ctx->add_flags |= added_ctxs;
+ new_add_flags = in_ctx->add_flags;
+
+ /* If xhci_endpoint_disable() was called for this endpoint, but the
+ * xHC hasn't been notified yet through the check_bandwidth() call,
+ * this re-adds a new state for the endpoint from the new endpoint
+ * descriptors. We must drop and re-add this endpoint, so we leave the
+ * drop flags alone.
+ */
+ new_drop_flags = in_ctx->drop_flags;
+
+ /* Update the last valid endpoint context, if we just added one past */
+ if ((in_ctx->slot.dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
+ in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+ in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+ }
+ new_slot_info = in_ctx->slot.dev_info;
+
+ xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
+ (unsigned int) ep->desc.bEndpointAddress,
+ udev->slot_id,
+ (unsigned int) new_drop_flags,
+ (unsigned int) new_add_flags,
+ (unsigned int) new_slot_info);
+ return 0;
+}
+
+static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
+{
+ struct xhci_ep_ctx *ep_ctx;
+ int i;
+
+ /* When a device's add flag and drop flag are zero, any subsequent
+ * configure endpoint command will leave that endpoint's state
+ * untouched. Make sure we don't leave any old state in the input
+ * endpoint contexts.
+ */
+ virt_dev->in_ctx->drop_flags = 0;
+ virt_dev->in_ctx->add_flags = 0;
+ virt_dev->in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+ /* Endpoint 0 is always valid */
+ virt_dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+ for (i = 1; i < 31; ++i) {
+ ep_ctx = &virt_dev->in_ctx->ep[i];
+ ep_ctx->ep_info = 0;
+ ep_ctx->ep_info2 = 0;
+ ep_ctx->deq[0] = 0;
+ ep_ctx->deq[1] = 0;
+ ep_ctx->tx_info = 0;
+ }
+}
+
+/* Called after one or more calls to xhci_add_endpoint() or
+ * xhci_drop_endpoint(). If this call fails, the USB core is expected
+ * to call xhci_reset_bandwidth().
+ *
+ * Since we are in the middle of changing either configuration or
+ * installing a new alt setting, the USB core won't allow URBs to be
+ * enqueued for any endpoint on the old config or interface. Nothing
+ * else should be touching the xhci->devs[slot_id] structure, so we
+ * don't need to take the xhci->lock for manipulating that.
+ */
+int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ int i;
+ int ret = 0;
+ int timeleft;
+ unsigned long flags;
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *virt_dev;
+
+ ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
+ if (ret <= 0)
+ return ret;
+ xhci = hcd_to_xhci(hcd);
+
+ if (!udev->slot_id || !xhci->devs || !xhci->devs[udev->slot_id]) {
+ xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+ __func__);
+ return -EINVAL;
+ }
+ xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+ virt_dev = xhci->devs[udev->slot_id];
+
+ /* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
+ virt_dev->in_ctx->add_flags |= SLOT_FLAG;
+ virt_dev->in_ctx->add_flags &= ~EP0_FLAG;
+ virt_dev->in_ctx->drop_flags &= ~SLOT_FLAG;
+ virt_dev->in_ctx->drop_flags &= ~EP0_FLAG;
+ xhci_dbg(xhci, "New Input Control Context:\n");
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma,
+ LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx_dma,
+ udev->slot_id);
+ if (ret < 0) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
+ return -ENOMEM;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* Wait for the configure endpoint command to complete */
+ timeleft = wait_for_completion_interruptible_timeout(
+ &virt_dev->cmd_completion,
+ USB_CTRL_SET_TIMEOUT);
+ if (timeleft <= 0) {
+ xhci_warn(xhci, "%s while waiting for configure endpoint command\n",
+ timeleft == 0 ? "Timeout" : "Signal");
+ /* FIXME cancel the configure endpoint command */
+ return -ETIME;
+ }
+
+ switch (virt_dev->cmd_status) {
+ case COMP_ENOMEM:
+ dev_warn(&udev->dev, "Not enough host controller resources "
+ "for new device state.\n");
+ ret = -ENOMEM;
+ /* FIXME: can we allocate more resources for the HC? */
+ break;
+ case COMP_BW_ERR:
+ dev_warn(&udev->dev, "Not enough bandwidth "
+ "for new device state.\n");
+ ret = -ENOSPC;
+ /* FIXME: can we go back to the old state? */
+ break;
+ case COMP_TRB_ERR:
+ /* the HCD set up something wrong */
+ dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, add flag = 1, "
+ "and endpoint is not disabled.\n");
+ ret = -EINVAL;
+ break;
+ case COMP_SUCCESS:
+ dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
+ break;
+ default:
+ xhci_err(xhci, "ERROR: unexpected command completion "
+ "code 0x%x.\n", virt_dev->cmd_status);
+ ret = -EINVAL;
+ break;
+ }
+ if (ret) {
+ /* Callee should call reset_bandwidth() */
+ return ret;
+ }
+
+ xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma,
+ LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+
+ xhci_zero_in_ctx(virt_dev);
+ /* Free any old rings */
+ for (i = 1; i < 31; ++i) {
+ if (virt_dev->new_ep_rings[i]) {
+ xhci_ring_free(xhci, virt_dev->ep_rings[i]);
+ virt_dev->ep_rings[i] = virt_dev->new_ep_rings[i];
+ virt_dev->new_ep_rings[i] = NULL;
+ }
+ }
+
+ return ret;
+}
+
+void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *virt_dev;
+ int i, ret;
+
+ ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
+ if (ret <= 0)
+ return;
+ xhci = hcd_to_xhci(hcd);
+
+ if (!xhci->devs || !xhci->devs[udev->slot_id]) {
+ xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+ __func__);
+ return;
+ }
+ xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+ virt_dev = xhci->devs[udev->slot_id];
+ /* Free any rings allocated for added endpoints */
+ for (i = 0; i < 31; ++i) {
+ if (virt_dev->new_ep_rings[i]) {
+ xhci_ring_free(xhci, virt_dev->new_ep_rings[i]);
+ virt_dev->new_ep_rings[i] = NULL;
+ }
+ }
+ xhci_zero_in_ctx(virt_dev);
+}
+
+/*
+ * At this point, the struct usb_device is about to go away, the device has
+ * disconnected, and all traffic has been stopped and the endpoints have been
+ * disabled. Free any HC data structures associated with that device.
+ */
+void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ unsigned long flags;
+
+ if (udev->slot_id == 0)
+ return;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+ return;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ /*
+ * Event command completion handler will free any data structures
+ * associated with the slot. XXX Can free sleep?
+ */
+}
+
+/*
+ * Returns 0 if the xHC ran out of device slots, the Enable Slot command
+ * timed out, or allocating memory failed. Returns 1 on success.
+ */
+int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ unsigned long flags;
+ int timeleft;
+ int ret;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0);
+ if (ret) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+ return 0;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* XXX: how much time for xHC slot assignment? */
+ timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
+ USB_CTRL_SET_TIMEOUT);
+ if (timeleft <= 0) {
+ xhci_warn(xhci, "%s while waiting for a slot\n",
+ timeleft == 0 ? "Timeout" : "Signal");
+ /* FIXME cancel the enable slot request */
+ return 0;
+ }
+
+ if (!xhci->slot_id) {
+ xhci_err(xhci, "Error while assigning device slot ID\n");
+ return 0;
+ }
+ /* xhci_alloc_virt_device() does not touch rings; no need to lock */
+ if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) {
+ /* Disable slot, if we can do it without mem alloc */
+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id))
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return 0;
+ }
+ udev->slot_id = xhci->slot_id;
+ /* Is this a LS or FS device under a HS hub? */
+ /* Hub or peripherial? */
+ return 1;
+}
+
+/*
+ * Issue an Address Device command (which will issue a SetAddress request to
+ * the device).
+ * We should be protected by the usb_address0_mutex in khubd's hub_port_init, so
+ * we should only issue and wait on one address command at the same time.
+ *
+ * We add one to the device address issued by the hardware because the USB core
+ * uses address 1 for the root hubs (even though they're not really devices).
+ */
+int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ unsigned long flags;
+ int timeleft;
+ struct xhci_virt_device *virt_dev;
+ int ret = 0;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ u32 temp;
+
+ if (!udev->slot_id) {
+ xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
+ return -EINVAL;
+ }
+
+ virt_dev = xhci->devs[udev->slot_id];
+
+ /* If this is a Set Address to an unconfigured device, setup ep 0 */
+ if (!udev->config)
+ xhci_setup_addressable_virt_dev(xhci, udev);
+ /* Otherwise, assume the core has the device configured how it wants */
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_address_device(xhci, virt_dev->in_ctx_dma,
+ udev->slot_id);
+ if (ret) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+ return ret;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */
+ timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
+ USB_CTRL_SET_TIMEOUT);
+ /* FIXME: From section 4.3.4: "Software shall be responsible for timing
+ * the SetAddress() "recovery interval" required by USB and aborting the
+ * command on a timeout.
+ */
+ if (timeleft <= 0) {
+ xhci_warn(xhci, "%s while waiting for a slot\n",
+ timeleft == 0 ? "Timeout" : "Signal");
+ /* FIXME cancel the address device command */
+ return -ETIME;
+ }
+
+ switch (virt_dev->cmd_status) {
+ case COMP_CTX_STATE:
+ case COMP_EBADSLT:
+ xhci_err(xhci, "Setup ERROR: address device command for slot %d.\n",
+ udev->slot_id);
+ ret = -EINVAL;
+ break;
+ case COMP_TX_ERR:
+ dev_warn(&udev->dev, "Device not responding to set address.\n");
+ ret = -EPROTO;
+ break;
+ case COMP_SUCCESS:
+ xhci_dbg(xhci, "Successful Address Device command\n");
+ break;
+ default:
+ xhci_err(xhci, "ERROR: unexpected command completion "
+ "code 0x%x.\n", virt_dev->cmd_status);
+ ret = -EINVAL;
+ break;
+ }
+ if (ret) {
+ return ret;
+ }
+ temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[0]);
+ xhci_dbg(xhci, "Op regs DCBAA ptr[0] = %#08x\n", temp);
+ temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[1]);
+ xhci_dbg(xhci, "Op regs DCBAA ptr[1] = %#08x\n", temp);
+ xhci_dbg(xhci, "Slot ID %d dcbaa entry[0] @%p = %#08x\n",
+ udev->slot_id,
+ &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id],
+ xhci->dcbaa->dev_context_ptrs[2*udev->slot_id]);
+ xhci_dbg(xhci, "Slot ID %d dcbaa entry[1] @%p = %#08x\n",
+ udev->slot_id,
+ &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1],
+ xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1]);
+ xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
+ (unsigned long long)virt_dev->out_ctx_dma);
+ xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2);
+ xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2);
+ /*
+ * USB core uses address 1 for the roothubs, so we add one to the
+ * address given back to us by the HC.
+ */
+ udev->devnum = (virt_dev->out_ctx->slot.dev_state & DEV_ADDR_MASK) + 1;
+ /* Zero the input context control for later use */
+ virt_dev->in_ctx->add_flags = 0;
+ virt_dev->in_ctx->drop_flags = 0;
+ /* Mirror flags in the output context for future ep enable/disable */
+ virt_dev->out_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+ virt_dev->out_ctx->drop_flags = 0;
+
+ xhci_dbg(xhci, "Device address = %d\n", udev->devnum);
+ /* XXX Meh, not sure if anyone else but choose_address uses this. */
+ set_bit(udev->devnum, udev->bus->devmap.devicemap);
+
+ return 0;
+}
+
+int xhci_get_frame(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ /* EHCI mods by the periodic size. Why? */
+ return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3;
+}
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+
+static int __init xhci_hcd_init(void)
+{
+#ifdef CONFIG_PCI
+ int retval = 0;
+
+ retval = xhci_register_pci();
+
+ if (retval < 0) {
+ printk(KERN_DEBUG "Problem registering PCI driver.");
+ return retval;
+ }
+#endif
+ /*
+ * Check the compiler generated sizes of structures that must be laid
+ * out in specific ways for hardware access.
+ */
+ BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_slot_ctx) != 8*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_ep_ctx) != 8*32/8);
+ /* xhci_device_control has eight fields, and also
+ * embeds one xhci_slot_ctx and 31 xhci_ep_ctx
+ */
+ BUILD_BUG_ON(sizeof(struct xhci_device_control) != (8+8+8*31)*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
+ BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_cap_regs) != 7*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
+ /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
+ BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
+ return 0;
+}
+module_init(xhci_hcd_init);
+
+static void __exit xhci_hcd_cleanup(void)
+{
+#ifdef CONFIG_PCI
+ xhci_unregister_pci();
+#endif
+}
+module_exit(xhci_hcd_cleanup);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
new file mode 100644
index 0000000..eac5b53
--- /dev/null
+++ b/drivers/usb/host/xhci-hub.c
@@ -0,0 +1,308 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/unaligned.h>
+
+#include "xhci.h"
+
+static void xhci_hub_descriptor(struct xhci_hcd *xhci,
+ struct usb_hub_descriptor *desc)
+{
+ int ports;
+ u16 temp;
+
+ ports = HCS_MAX_PORTS(xhci->hcs_params1);
+
+ /* USB 3.0 hubs have a different descriptor, but we fake this for now */
+ desc->bDescriptorType = 0x29;
+ desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.9 says 20ms max */
+ desc->bHubContrCurrent = 0;
+
+ desc->bNbrPorts = ports;
+ temp = 1 + (ports / 8);
+ desc->bDescLength = 7 + 2 * temp;
+
+ /* Why does core/hcd.h define bitmap? It's just confusing. */
+ memset(&desc->DeviceRemovable[0], 0, temp);
+ memset(&desc->DeviceRemovable[temp], 0xff, temp);
+
+ /* Ugh, these should be #defines, FIXME */
+ /* Using table 11-13 in USB 2.0 spec. */
+ temp = 0;
+ /* Bits 1:0 - support port power switching, or power always on */
+ if (HCC_PPC(xhci->hcc_params))
+ temp |= 0x0001;
+ else
+ temp |= 0x0002;
+ /* Bit 2 - root hubs are not part of a compound device */
+ /* Bits 4:3 - individual port over current protection */
+ temp |= 0x0008;
+ /* Bits 6:5 - no TTs in root ports */
+ /* Bit 7 - no port indicators */
+ desc->wHubCharacteristics = (__force __u16) cpu_to_le16(temp);
+}
+
+static unsigned int xhci_port_speed(unsigned int port_status)
+{
+ if (DEV_LOWSPEED(port_status))
+ return 1 << USB_PORT_FEAT_LOWSPEED;
+ if (DEV_HIGHSPEED(port_status))
+ return 1 << USB_PORT_FEAT_HIGHSPEED;
+ if (DEV_SUPERSPEED(port_status))
+ return 1 << USB_PORT_FEAT_SUPERSPEED;
+ /*
+ * FIXME: Yes, we should check for full speed, but the core uses that as
+ * a default in portspeed() in usb/core/hub.c (which is the only place
+ * USB_PORT_FEAT_*SPEED is used).
+ */
+ return 0;
+}
+
+/*
+ * These bits are Read Only (RO) and should be saved and written to the
+ * registers: 0, 3, 10:13, 30
+ * connect status, over-current status, port speed, and device removable.
+ * connect status and port speed are also sticky - meaning they're in
+ * the AUX well and they aren't changed by a hot, warm, or cold reset.
+ */
+#define XHCI_PORT_RO ((1<<0) | (1<<3) | (0xf<<10) | (1<<30))
+/*
+ * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
+ * bits 5:8, 9, 14:15, 25:27
+ * link state, port power, port indicator state, "wake on" enable state
+ */
+#define XHCI_PORT_RWS ((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25))
+/*
+ * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
+ * bit 4 (port reset)
+ */
+#define XHCI_PORT_RW1S ((1<<4))
+/*
+ * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
+ * bits 1, 17, 18, 19, 20, 21, 22, 23
+ * port enable/disable, and
+ * change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports),
+ * over-current, reset, link state, and L1 change
+ */
+#define XHCI_PORT_RW1CS ((1<<1) | (0x7f<<17))
+/*
+ * Bit 16 is RW, and writing a '1' to it causes the link state control to be
+ * latched in
+ */
+#define XHCI_PORT_RW ((1<<16))
+/*
+ * These bits are Reserved Zero (RsvdZ) and zero should be written to them:
+ * bits 2, 24, 28:31
+ */
+#define XHCI_PORT_RZ ((1<<2) | (1<<24) | (0xf<<28))
+
+/*
+ * Given a port state, this function returns a value that would result in the
+ * port being in the same state, if the value was written to the port status
+ * control register.
+ * Save Read Only (RO) bits and save read/write bits where
+ * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
+ * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
+ */
+static u32 xhci_port_state_to_neutral(u32 state)
+{
+ /* Save read-only status and port state */
+ return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
+}
+
+int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int ports;
+ unsigned long flags;
+ u32 temp, status;
+ int retval = 0;
+ u32 __iomem *addr;
+ char *port_change_bit;
+
+ ports = HCS_MAX_PORTS(xhci->hcs_params1);
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ switch (typeReq) {
+ case GetHubStatus:
+ /* No power source, over-current reported per port */
+ memset(buf, 0, 4);
+ break;
+ case GetHubDescriptor:
+ xhci_hub_descriptor(xhci, (struct usb_hub_descriptor *) buf);
+ break;
+ case GetPortStatus:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ status = 0;
+ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff);
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", wIndex, temp);
+
+ /* wPortChange bits */
+ if (temp & PORT_CSC)
+ status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+ if (temp & PORT_PEC)
+ status |= 1 << USB_PORT_FEAT_C_ENABLE;
+ if ((temp & PORT_OCC))
+ status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+ /*
+ * FIXME ignoring suspend, reset, and USB 2.1/3.0 specific
+ * changes
+ */
+ if (temp & PORT_CONNECT) {
+ status |= 1 << USB_PORT_FEAT_CONNECTION;
+ status |= xhci_port_speed(temp);
+ }
+ if (temp & PORT_PE)
+ status |= 1 << USB_PORT_FEAT_ENABLE;
+ if (temp & PORT_OC)
+ status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+ if (temp & PORT_RESET)
+ status |= 1 << USB_PORT_FEAT_RESET;
+ if (temp & PORT_POWER)
+ status |= 1 << USB_PORT_FEAT_POWER;
+ xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
+ put_unaligned(cpu_to_le32(status), (__le32 *) buf);
+ break;
+ case SetPortFeature:
+ wIndex &= 0xff;
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff);
+ temp = xhci_readl(xhci, addr);
+ temp = xhci_port_state_to_neutral(temp);
+ switch (wValue) {
+ case USB_PORT_FEAT_POWER:
+ /*
+ * Turn on ports, even if there isn't per-port switching.
+ * HC will report connect events even before this is set.
+ * However, khubd will ignore the roothub events until
+ * the roothub is registered.
+ */
+ xhci_writel(xhci, temp | PORT_POWER, addr);
+
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp);
+ break;
+ case USB_PORT_FEAT_RESET:
+ temp = (temp | PORT_RESET);
+ xhci_writel(xhci, temp, addr);
+
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp);
+ break;
+ default:
+ goto error;
+ }
+ temp = xhci_readl(xhci, addr); /* unblock any posted writes */
+ break;
+ case ClearPortFeature:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ addr = &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*(wIndex & 0xff);
+ temp = xhci_readl(xhci, addr);
+ temp = xhci_port_state_to_neutral(temp);
+ switch (wValue) {
+ case USB_PORT_FEAT_C_RESET:
+ status = PORT_RC;
+ port_change_bit = "reset";
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ status = PORT_CSC;
+ port_change_bit = "connect";
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ status = PORT_OCC;
+ port_change_bit = "over-current";
+ break;
+ default:
+ goto error;
+ }
+ /* Change bits are all write 1 to clear */
+ xhci_writel(xhci, temp | status, addr);
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n",
+ port_change_bit, wIndex, temp);
+ temp = xhci_readl(xhci, addr); /* unblock any posted writes */
+ break;
+ default:
+error:
+ /* "stall" on error */
+ retval = -EPIPE;
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return retval;
+}
+
+/*
+ * Returns 0 if the status hasn't changed, or the number of bytes in buf.
+ * Ports are 0-indexed from the HCD point of view,
+ * and 1-indexed from the USB core pointer of view.
+ * xHCI instances can have up to 127 ports, so FIXME if you see more than 15.
+ *
+ * Note that the status change bits will be cleared as soon as a port status
+ * change event is generated, so we use the saved status from that event.
+ */
+int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ unsigned long flags;
+ u32 temp, status;
+ int i, retval;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int ports;
+ u32 __iomem *addr;
+
+ ports = HCS_MAX_PORTS(xhci->hcs_params1);
+
+ /* Initial status is no changes */
+ buf[0] = 0;
+ status = 0;
+ if (ports > 7) {
+ buf[1] = 0;
+ retval = 2;
+ } else {
+ retval = 1;
+ }
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* For each port, did anything change? If so, set that bit in buf. */
+ for (i = 0; i < ports; i++) {
+ addr = &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ temp = xhci_readl(xhci, addr);
+ if (temp & (PORT_CSC | PORT_PEC | PORT_OCC)) {
+ if (i < 7)
+ buf[0] |= 1 << (i + 1);
+ else
+ buf[1] |= 1 << (i - 7);
+ status = 1;
+ }
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return status ? retval : 0;
+}
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
new file mode 100644
index 0000000..c8a72de
--- /dev/null
+++ b/drivers/usb/host/xhci-mem.c
@@ -0,0 +1,769 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/usb.h>
+#include <linux/pci.h>
+#include <linux/dmapool.h>
+
+#include "xhci.h"
+
+/*
+ * Allocates a generic ring segment from the ring pool, sets the dma address,
+ * initializes the segment to zero, and sets the private next pointer to NULL.
+ *
+ * Section 4.11.1.1:
+ * "All components of all Command and Transfer TRBs shall be initialized to '0'"
+ */
+static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, gfp_t flags)
+{
+ struct xhci_segment *seg;
+ dma_addr_t dma;
+
+ seg = kzalloc(sizeof *seg, flags);
+ if (!seg)
+ return 0;
+ xhci_dbg(xhci, "Allocating priv segment structure at %p\n", seg);
+
+ seg->trbs = dma_pool_alloc(xhci->segment_pool, flags, &dma);
+ if (!seg->trbs) {
+ kfree(seg);
+ return 0;
+ }
+ xhci_dbg(xhci, "// Allocating segment at %p (virtual) 0x%llx (DMA)\n",
+ seg->trbs, (unsigned long long)dma);
+
+ memset(seg->trbs, 0, SEGMENT_SIZE);
+ seg->dma = dma;
+ seg->next = NULL;
+
+ return seg;
+}
+
+static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
+{
+ if (!seg)
+ return;
+ if (seg->trbs) {
+ xhci_dbg(xhci, "Freeing DMA segment at %p (virtual) 0x%llx (DMA)\n",
+ seg->trbs, (unsigned long long)seg->dma);
+ dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
+ seg->trbs = NULL;
+ }
+ xhci_dbg(xhci, "Freeing priv segment structure at %p\n", seg);
+ kfree(seg);
+}
+
+/*
+ * Make the prev segment point to the next segment.
+ *
+ * Change the last TRB in the prev segment to be a Link TRB which points to the
+ * DMA address of the next segment. The caller needs to set any Link TRB
+ * related flags, such as End TRB, Toggle Cycle, and no snoop.
+ */
+static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
+ struct xhci_segment *next, bool link_trbs)
+{
+ u32 val;
+
+ if (!prev || !next)
+ return;
+ prev->next = next;
+ if (link_trbs) {
+ prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr[0] = next->dma;
+
+ /* Set the last TRB in the segment to have a TRB type ID of Link TRB */
+ val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
+ val &= ~TRB_TYPE_BITMASK;
+ val |= TRB_TYPE(TRB_LINK);
+ prev->trbs[TRBS_PER_SEGMENT-1].link.control = val;
+ }
+ xhci_dbg(xhci, "Linking segment 0x%llx to segment 0x%llx (DMA)\n",
+ (unsigned long long)prev->dma,
+ (unsigned long long)next->dma);
+}
+
+/* XXX: Do we need the hcd structure in all these functions? */
+void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+ struct xhci_segment *seg;
+ struct xhci_segment *first_seg;
+
+ if (!ring || !ring->first_seg)
+ return;
+ first_seg = ring->first_seg;
+ seg = first_seg->next;
+ xhci_dbg(xhci, "Freeing ring at %p\n", ring);
+ while (seg != first_seg) {
+ struct xhci_segment *next = seg->next;
+ xhci_segment_free(xhci, seg);
+ seg = next;
+ }
+ xhci_segment_free(xhci, first_seg);
+ ring->first_seg = NULL;
+ kfree(ring);
+}
+
+/**
+ * Create a new ring with zero or more segments.
+ *
+ * Link each segment together into a ring.
+ * Set the end flag and the cycle toggle bit on the last segment.
+ * See section 4.9.1 and figures 15 and 16.
+ */
+static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
+ unsigned int num_segs, bool link_trbs, gfp_t flags)
+{
+ struct xhci_ring *ring;
+ struct xhci_segment *prev;
+
+ ring = kzalloc(sizeof *(ring), flags);
+ xhci_dbg(xhci, "Allocating ring at %p\n", ring);
+ if (!ring)
+ return 0;
+
+ INIT_LIST_HEAD(&ring->td_list);
+ INIT_LIST_HEAD(&ring->cancelled_td_list);
+ if (num_segs == 0)
+ return ring;
+
+ ring->first_seg = xhci_segment_alloc(xhci, flags);
+ if (!ring->first_seg)
+ goto fail;
+ num_segs--;
+
+ prev = ring->first_seg;
+ while (num_segs > 0) {
+ struct xhci_segment *next;
+
+ next = xhci_segment_alloc(xhci, flags);
+ if (!next)
+ goto fail;
+ xhci_link_segments(xhci, prev, next, link_trbs);
+
+ prev = next;
+ num_segs--;
+ }
+ xhci_link_segments(xhci, prev, ring->first_seg, link_trbs);
+
+ if (link_trbs) {
+ /* See section 4.9.2.1 and 6.4.4.1 */
+ prev->trbs[TRBS_PER_SEGMENT-1].link.control |= (LINK_TOGGLE);
+ xhci_dbg(xhci, "Wrote link toggle flag to"
+ " segment %p (virtual), 0x%llx (DMA)\n",
+ prev, (unsigned long long)prev->dma);
+ }
+ /* The ring is empty, so the enqueue pointer == dequeue pointer */
+ ring->enqueue = ring->first_seg->trbs;
+ ring->enq_seg = ring->first_seg;
+ ring->dequeue = ring->enqueue;
+ ring->deq_seg = ring->first_seg;
+ /* The ring is initialized to 0. The producer must write 1 to the cycle
+ * bit to handover ownership of the TRB, so PCS = 1. The consumer must
+ * compare CCS to the cycle bit to check ownership, so CCS = 1.
+ */
+ ring->cycle_state = 1;
+
+ return ring;
+
+fail:
+ xhci_ring_free(xhci, ring);
+ return 0;
+}
+
+/* All the xhci_tds in the ring's TD list should be freed at this point */
+void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
+{
+ struct xhci_virt_device *dev;
+ int i;
+
+ /* Slot ID 0 is reserved */
+ if (slot_id == 0 || !xhci->devs[slot_id])
+ return;
+
+ dev = xhci->devs[slot_id];
+ xhci->dcbaa->dev_context_ptrs[2*slot_id] = 0;
+ xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+ if (!dev)
+ return;
+
+ for (i = 0; i < 31; ++i)
+ if (dev->ep_rings[i])
+ xhci_ring_free(xhci, dev->ep_rings[i]);
+
+ if (dev->in_ctx)
+ dma_pool_free(xhci->device_pool,
+ dev->in_ctx, dev->in_ctx_dma);
+ if (dev->out_ctx)
+ dma_pool_free(xhci->device_pool,
+ dev->out_ctx, dev->out_ctx_dma);
+ kfree(xhci->devs[slot_id]);
+ xhci->devs[slot_id] = 0;
+}
+
+int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
+ struct usb_device *udev, gfp_t flags)
+{
+ dma_addr_t dma;
+ struct xhci_virt_device *dev;
+
+ /* Slot ID 0 is reserved */
+ if (slot_id == 0 || xhci->devs[slot_id]) {
+ xhci_warn(xhci, "Bad Slot ID %d\n", slot_id);
+ return 0;
+ }
+
+ xhci->devs[slot_id] = kzalloc(sizeof(*xhci->devs[slot_id]), flags);
+ if (!xhci->devs[slot_id])
+ return 0;
+ dev = xhci->devs[slot_id];
+
+ /* Allocate the (output) device context that will be used in the HC */
+ dev->out_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+ if (!dev->out_ctx)
+ goto fail;
+ dev->out_ctx_dma = dma;
+ xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
+ (unsigned long long)dma);
+ memset(dev->out_ctx, 0, sizeof(*dev->out_ctx));
+
+ /* Allocate the (input) device context for address device command */
+ dev->in_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+ if (!dev->in_ctx)
+ goto fail;
+ dev->in_ctx_dma = dma;
+ xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
+ (unsigned long long)dma);
+ memset(dev->in_ctx, 0, sizeof(*dev->in_ctx));
+
+ /* Allocate endpoint 0 ring */
+ dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags);
+ if (!dev->ep_rings[0])
+ goto fail;
+
+ init_completion(&dev->cmd_completion);
+
+ /*
+ * Point to output device context in dcbaa; skip the output control
+ * context, which is eight 32 bit fields (or 32 bytes long)
+ */
+ xhci->dcbaa->dev_context_ptrs[2*slot_id] =
+ (u32) dev->out_ctx_dma + (32);
+ xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
+ slot_id,
+ &xhci->dcbaa->dev_context_ptrs[2*slot_id],
+ (unsigned long long)dev->out_ctx_dma);
+ xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+
+ return 1;
+fail:
+ xhci_free_virt_device(xhci, slot_id);
+ return 0;
+}
+
+/* Setup an xHCI virtual device for a Set Address command */
+int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
+{
+ struct xhci_virt_device *dev;
+ struct xhci_ep_ctx *ep0_ctx;
+ struct usb_device *top_dev;
+
+ dev = xhci->devs[udev->slot_id];
+ /* Slot ID 0 is reserved */
+ if (udev->slot_id == 0 || !dev) {
+ xhci_warn(xhci, "Slot ID %d is not assigned to this device\n",
+ udev->slot_id);
+ return -EINVAL;
+ }
+ ep0_ctx = &dev->in_ctx->ep[0];
+
+ /* 2) New slot context and endpoint 0 context are valid*/
+ dev->in_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+
+ /* 3) Only the control endpoint is valid - one endpoint context */
+ dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+
+ switch (udev->speed) {
+ case USB_SPEED_SUPER:
+ dev->in_ctx->slot.dev_info |= (u32) udev->route;
+ dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_SS;
+ break;
+ case USB_SPEED_HIGH:
+ dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_HS;
+ break;
+ case USB_SPEED_FULL:
+ dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_FS;
+ break;
+ case USB_SPEED_LOW:
+ dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_LS;
+ break;
+ case USB_SPEED_VARIABLE:
+ xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
+ return -EINVAL;
+ break;
+ default:
+ /* Speed was set earlier, this shouldn't happen. */
+ BUG();
+ }
+ /* Find the root hub port this device is under */
+ for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
+ top_dev = top_dev->parent)
+ /* Found device below root hub */;
+ dev->in_ctx->slot.dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
+ xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
+
+ /* Is this a LS/FS device under a HS hub? */
+ /*
+ * FIXME: I don't think this is right, where does the TT info for the
+ * roothub or parent hub come from?
+ */
+ if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
+ udev->tt) {
+ dev->in_ctx->slot.tt_info = udev->tt->hub->slot_id;
+ dev->in_ctx->slot.tt_info |= udev->ttport << 8;
+ }
+ xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
+ xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
+
+ /* Step 4 - ring already allocated */
+ /* Step 5 */
+ ep0_ctx->ep_info2 = EP_TYPE(CTRL_EP);
+ /*
+ * See section 4.3 bullet 6:
+ * The default Max Packet size for ep0 is "8 bytes for a USB2
+ * LS/FS/HS device or 512 bytes for a USB3 SS device"
+ * XXX: Not sure about wireless USB devices.
+ */
+ if (udev->speed == USB_SPEED_SUPER)
+ ep0_ctx->ep_info2 |= MAX_PACKET(512);
+ else
+ ep0_ctx->ep_info2 |= MAX_PACKET(8);
+ /* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
+ ep0_ctx->ep_info2 |= MAX_BURST(0);
+ ep0_ctx->ep_info2 |= ERROR_COUNT(3);
+
+ ep0_ctx->deq[0] =
+ dev->ep_rings[0]->first_seg->dma;
+ ep0_ctx->deq[0] |= dev->ep_rings[0]->cycle_state;
+ ep0_ctx->deq[1] = 0;
+
+ /* Steps 7 and 8 were done in xhci_alloc_virt_device() */
+
+ return 0;
+}
+
+/* Return the polling or NAK interval.
+ *
+ * The polling interval is expressed in "microframes". If xHCI's Interval field
+ * is set to N, it will service the endpoint every 2^(Interval)*125us.
+ *
+ * The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval
+ * is set to 0.
+ */
+static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ unsigned int interval = 0;
+
+ switch (udev->speed) {
+ case USB_SPEED_HIGH:
+ /* Max NAK rate */
+ if (usb_endpoint_xfer_control(&ep->desc) ||
+ usb_endpoint_xfer_bulk(&ep->desc))
+ interval = ep->desc.bInterval;
+ /* Fall through - SS and HS isoc/int have same decoding */
+ case USB_SPEED_SUPER:
+ if (usb_endpoint_xfer_int(&ep->desc) ||
+ usb_endpoint_xfer_isoc(&ep->desc)) {
+ if (ep->desc.bInterval == 0)
+ interval = 0;
+ else
+ interval = ep->desc.bInterval - 1;
+ if (interval > 15)
+ interval = 15;
+ if (interval != ep->desc.bInterval + 1)
+ dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
+ ep->desc.bEndpointAddress, 1 << interval);
+ }
+ break;
+ /* Convert bInterval (in 1-255 frames) to microframes and round down to
+ * nearest power of 2.
+ */
+ case USB_SPEED_FULL:
+ case USB_SPEED_LOW:
+ if (usb_endpoint_xfer_int(&ep->desc) ||
+ usb_endpoint_xfer_isoc(&ep->desc)) {
+ interval = fls(8*ep->desc.bInterval) - 1;
+ if (interval > 10)
+ interval = 10;
+ if (interval < 3)
+ interval = 3;
+ if ((1 << interval) != 8*ep->desc.bInterval)
+ dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
+ ep->desc.bEndpointAddress, 1 << interval);
+ }
+ break;
+ default:
+ BUG();
+ }
+ return EP_INTERVAL(interval);
+}
+
+static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ int in;
+ u32 type;
+
+ in = usb_endpoint_dir_in(&ep->desc);
+ if (usb_endpoint_xfer_control(&ep->desc)) {
+ type = EP_TYPE(CTRL_EP);
+ } else if (usb_endpoint_xfer_bulk(&ep->desc)) {
+ if (in)
+ type = EP_TYPE(BULK_IN_EP);
+ else
+ type = EP_TYPE(BULK_OUT_EP);
+ } else if (usb_endpoint_xfer_isoc(&ep->desc)) {
+ if (in)
+ type = EP_TYPE(ISOC_IN_EP);
+ else
+ type = EP_TYPE(ISOC_OUT_EP);
+ } else if (usb_endpoint_xfer_int(&ep->desc)) {
+ if (in)
+ type = EP_TYPE(INT_IN_EP);
+ else
+ type = EP_TYPE(INT_OUT_EP);
+ } else {
+ BUG();
+ }
+ return type;
+}
+
+int xhci_endpoint_init(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ struct usb_device *udev,
+ struct usb_host_endpoint *ep,
+ gfp_t mem_flags)
+{
+ unsigned int ep_index;
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_ring *ep_ring;
+ unsigned int max_packet;
+ unsigned int max_burst;
+
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+
+ /* Set up the endpoint ring */
+ virt_dev->new_ep_rings[ep_index] = xhci_ring_alloc(xhci, 1, true, mem_flags);
+ if (!virt_dev->new_ep_rings[ep_index])
+ return -ENOMEM;
+ ep_ring = virt_dev->new_ep_rings[ep_index];
+ ep_ctx->deq[0] = ep_ring->first_seg->dma | ep_ring->cycle_state;
+ ep_ctx->deq[1] = 0;
+
+ ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
+
+ /* FIXME dig Mult and streams info out of ep companion desc */
+
+ /* Allow 3 retries for everything but isoc */
+ if (!usb_endpoint_xfer_isoc(&ep->desc))
+ ep_ctx->ep_info2 = ERROR_COUNT(3);
+ else
+ ep_ctx->ep_info2 = ERROR_COUNT(0);
+
+ ep_ctx->ep_info2 |= xhci_get_endpoint_type(udev, ep);
+
+ /* Set the max packet size and max burst */
+ switch (udev->speed) {
+ case USB_SPEED_SUPER:
+ max_packet = ep->desc.wMaxPacketSize;
+ ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
+ /* dig out max burst from ep companion desc */
+ max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+ ep_ctx->ep_info2 |= MAX_BURST(max_packet);
+ break;
+ case USB_SPEED_HIGH:
+ /* bits 11:12 specify the number of additional transaction
+ * opportunities per microframe (USB 2.0, section 9.6.6)
+ */
+ if (usb_endpoint_xfer_isoc(&ep->desc) ||
+ usb_endpoint_xfer_int(&ep->desc)) {
+ max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
+ ep_ctx->ep_info2 |= MAX_BURST(max_burst);
+ }
+ /* Fall through */
+ case USB_SPEED_FULL:
+ case USB_SPEED_LOW:
+ max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+ ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
+ break;
+ default:
+ BUG();
+ }
+ /* FIXME Debug endpoint context */
+ return 0;
+}
+
+void xhci_endpoint_zero(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ struct usb_host_endpoint *ep)
+{
+ unsigned int ep_index;
+ struct xhci_ep_ctx *ep_ctx;
+
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+
+ ep_ctx->ep_info = 0;
+ ep_ctx->ep_info2 = 0;
+ ep_ctx->deq[0] = 0;
+ ep_ctx->deq[1] = 0;
+ ep_ctx->tx_info = 0;
+ /* Don't free the endpoint ring until the set interface or configuration
+ * request succeeds.
+ */
+}
+
+void xhci_mem_cleanup(struct xhci_hcd *xhci)
+{
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+ int size;
+ int i;
+
+ /* Free the Event Ring Segment Table and the actual Event Ring */
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_base[0]);
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[0]);
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
+ size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
+ if (xhci->erst.entries)
+ pci_free_consistent(pdev, size,
+ xhci->erst.entries, xhci->erst.erst_dma_addr);
+ xhci->erst.entries = NULL;
+ xhci_dbg(xhci, "Freed ERST\n");
+ if (xhci->event_ring)
+ xhci_ring_free(xhci, xhci->event_ring);
+ xhci->event_ring = NULL;
+ xhci_dbg(xhci, "Freed event ring\n");
+
+ xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[0]);
+ xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[1]);
+ if (xhci->cmd_ring)
+ xhci_ring_free(xhci, xhci->cmd_ring);
+ xhci->cmd_ring = NULL;
+ xhci_dbg(xhci, "Freed command ring\n");
+
+ for (i = 1; i < MAX_HC_SLOTS; ++i)
+ xhci_free_virt_device(xhci, i);
+
+ if (xhci->segment_pool)
+ dma_pool_destroy(xhci->segment_pool);
+ xhci->segment_pool = NULL;
+ xhci_dbg(xhci, "Freed segment pool\n");
+
+ if (xhci->device_pool)
+ dma_pool_destroy(xhci->device_pool);
+ xhci->device_pool = NULL;
+ xhci_dbg(xhci, "Freed device context pool\n");
+
+ xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[0]);
+ xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[1]);
+ if (xhci->dcbaa)
+ pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
+ xhci->dcbaa, xhci->dcbaa->dma);
+ xhci->dcbaa = NULL;
+
+ xhci->page_size = 0;
+ xhci->page_shift = 0;
+}
+
+int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
+{
+ dma_addr_t dma;
+ struct device *dev = xhci_to_hcd(xhci)->self.controller;
+ unsigned int val, val2;
+ struct xhci_segment *seg;
+ u32 page_size;
+ int i;
+
+ page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
+ xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
+ for (i = 0; i < 16; i++) {
+ if ((0x1 & page_size) != 0)
+ break;
+ page_size = page_size >> 1;
+ }
+ if (i < 16)
+ xhci_dbg(xhci, "Supported page size of %iK\n", (1 << (i+12)) / 1024);
+ else
+ xhci_warn(xhci, "WARN: no supported page size\n");
+ /* Use 4K pages, since that's common and the minimum the HC supports */
+ xhci->page_shift = 12;
+ xhci->page_size = 1 << xhci->page_shift;
+ xhci_dbg(xhci, "HCD page size set to %iK\n", xhci->page_size / 1024);
+
+ /*
+ * Program the Number of Device Slots Enabled field in the CONFIG
+ * register with the max value of slots the HC can handle.
+ */
+ val = HCS_MAX_SLOTS(xhci_readl(xhci, &xhci->cap_regs->hcs_params1));
+ xhci_dbg(xhci, "// xHC can handle at most %d device slots.\n",
+ (unsigned int) val);
+ val2 = xhci_readl(xhci, &xhci->op_regs->config_reg);
+ val |= (val2 & ~HCS_SLOTS_MASK);
+ xhci_dbg(xhci, "// Setting Max device slots reg = 0x%x.\n",
+ (unsigned int) val);
+ xhci_writel(xhci, val, &xhci->op_regs->config_reg);
+
+ /*
+ * Section 5.4.8 - doorbell array must be
+ * "physically contiguous and 64-byte (cache line) aligned".
+ */
+ xhci->dcbaa = pci_alloc_consistent(to_pci_dev(dev),
+ sizeof(*xhci->dcbaa), &dma);
+ if (!xhci->dcbaa)
+ goto fail;
+ memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa));
+ xhci->dcbaa->dma = dma;
+ xhci_dbg(xhci, "// Device context base array address = 0x%llx (DMA), %p (virt)\n",
+ (unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
+ xhci_writel(xhci, dma, &xhci->op_regs->dcbaa_ptr[0]);
+ xhci_writel(xhci, (u32) 0, &xhci->op_regs->dcbaa_ptr[1]);
+
+ /*
+ * Initialize the ring segment pool. The ring must be a contiguous
+ * structure comprised of TRBs. The TRBs must be 16 byte aligned,
+ * however, the command ring segment needs 64-byte aligned segments,
+ * so we pick the greater alignment need.
+ */
+ xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
+ SEGMENT_SIZE, 64, xhci->page_size);
+ /* See Table 46 and Note on Figure 55 */
+ /* FIXME support 64-byte contexts */
+ xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
+ sizeof(struct xhci_device_control),
+ 64, xhci->page_size);
+ if (!xhci->segment_pool || !xhci->device_pool)
+ goto fail;
+
+ /* Set up the command ring to have one segments for now. */
+ xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, flags);
+ if (!xhci->cmd_ring)
+ goto fail;
+ xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
+ xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
+ (unsigned long long)xhci->cmd_ring->first_seg->dma);
+
+ /* Set the address in the Command Ring Control register */
+ val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
+ val = (val & ~CMD_RING_ADDR_MASK) |
+ (xhci->cmd_ring->first_seg->dma & CMD_RING_ADDR_MASK) |
+ xhci->cmd_ring->cycle_state;
+ xhci_dbg(xhci, "// Setting command ring address low bits to 0x%x\n", val);
+ xhci_writel(xhci, val, &xhci->op_regs->cmd_ring[0]);
+ xhci_dbg(xhci, "// Setting command ring address high bits to 0x0\n");
+ xhci_writel(xhci, (u32) 0, &xhci->op_regs->cmd_ring[1]);
+ xhci_dbg_cmd_ptrs(xhci);
+
+ val = xhci_readl(xhci, &xhci->cap_regs->db_off);
+ val &= DBOFF_MASK;
+ xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x"
+ " from cap regs base addr\n", val);
+ xhci->dba = (void *) xhci->cap_regs + val;
+ xhci_dbg_regs(xhci);
+ xhci_print_run_regs(xhci);
+ /* Set ir_set to interrupt register set 0 */
+ xhci->ir_set = (void *) xhci->run_regs->ir_set;
+
+ /*
+ * Event ring setup: Allocate a normal ring, but also setup
+ * the event ring segment table (ERST). Section 4.9.3.
+ */
+ xhci_dbg(xhci, "// Allocating event ring\n");
+ xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, flags);
+ if (!xhci->event_ring)
+ goto fail;
+
+ xhci->erst.entries = pci_alloc_consistent(to_pci_dev(dev),
+ sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS, &dma);
+ if (!xhci->erst.entries)
+ goto fail;
+ xhci_dbg(xhci, "// Allocated event ring segment table at 0x%llx\n",
+ (unsigned long long)dma);
+
+ memset(xhci->erst.entries, 0, sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS);
+ xhci->erst.num_entries = ERST_NUM_SEGS;
+ xhci->erst.erst_dma_addr = dma;
+ xhci_dbg(xhci, "Set ERST to 0; private num segs = %i, virt addr = %p, dma addr = 0x%llx\n",
+ xhci->erst.num_entries,
+ xhci->erst.entries,
+ (unsigned long long)xhci->erst.erst_dma_addr);
+
+ /* set ring base address and size for each segment table entry */
+ for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) {
+ struct xhci_erst_entry *entry = &xhci->erst.entries[val];
+ entry->seg_addr[0] = seg->dma;
+ entry->seg_addr[1] = 0;
+ entry->seg_size = TRBS_PER_SEGMENT;
+ entry->rsvd = 0;
+ seg = seg->next;
+ }
+
+ /* set ERST count with the number of entries in the segment table */
+ val = xhci_readl(xhci, &xhci->ir_set->erst_size);
+ val &= ERST_SIZE_MASK;
+ val |= ERST_NUM_SEGS;
+ xhci_dbg(xhci, "// Write ERST size = %i to ir_set 0 (some bits preserved)\n",
+ val);
+ xhci_writel(xhci, val, &xhci->ir_set->erst_size);
+
+ xhci_dbg(xhci, "// Set ERST entries to point to event ring.\n");
+ /* set the segment table base address */
+ xhci_dbg(xhci, "// Set ERST base address for ir_set 0 = 0x%llx\n",
+ (unsigned long long)xhci->erst.erst_dma_addr);
+ val = xhci_readl(xhci, &xhci->ir_set->erst_base[0]);
+ val &= ERST_PTR_MASK;
+ val |= (xhci->erst.erst_dma_addr & ~ERST_PTR_MASK);
+ xhci_writel(xhci, val, &xhci->ir_set->erst_base[0]);
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
+
+ /* Set the event ring dequeue address */
+ xhci_set_hc_event_deq(xhci);
+ xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n");
+ xhci_print_ir_set(xhci, xhci->ir_set, 0);
+
+ /*
+ * XXX: Might need to set the Interrupter Moderation Register to
+ * something other than the default (~1ms minimum between interrupts).
+ * See section 5.5.1.2.
+ */
+ init_completion(&xhci->addr_dev);
+ for (i = 0; i < MAX_HC_SLOTS; ++i)
+ xhci->devs[i] = 0;
+
+ return 0;
+fail:
+ xhci_warn(xhci, "Couldn't initialize memory\n");
+ xhci_mem_cleanup(xhci);
+ return -ENOMEM;
+}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
new file mode 100644
index 0000000..1462709
--- /dev/null
+++ b/drivers/usb/host/xhci-pci.c
@@ -0,0 +1,166 @@
+/*
+ * xHCI host controller driver PCI Bus Glue.
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pci.h>
+
+#include "xhci.h"
+
+static const char hcd_name[] = "xhci_hcd";
+
+/* called after powerup, by probe or system-pm "wakeup" */
+static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
+{
+ /*
+ * TODO: Implement finding debug ports later.
+ * TODO: see if there are any quirks that need to be added to handle
+ * new extended capabilities.
+ */
+
+ /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
+ if (!pci_set_mwi(pdev))
+ xhci_dbg(xhci, "MWI active\n");
+
+ xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
+ return 0;
+}
+
+/* called during probe() after chip reset completes */
+static int xhci_pci_setup(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ int retval;
+
+ xhci->cap_regs = hcd->regs;
+ xhci->op_regs = hcd->regs +
+ HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
+ xhci->run_regs = hcd->regs +
+ (xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
+ /* Cache read-only capability registers */
+ xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
+ xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
+ xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+ xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+ xhci_print_registers(xhci);
+
+ /* Make sure the HC is halted. */
+ retval = xhci_halt(xhci);
+ if (retval)
+ return retval;
+
+ xhci_dbg(xhci, "Resetting HCD\n");
+ /* Reset the internal HC memory state and registers. */
+ retval = xhci_reset(xhci);
+ if (retval)
+ return retval;
+ xhci_dbg(xhci, "Reset complete\n");
+
+ xhci_dbg(xhci, "Calling HCD init\n");
+ /* Initialize HCD and host controller data structures. */
+ retval = xhci_init(hcd);
+ if (retval)
+ return retval;
+ xhci_dbg(xhci, "Called HCD init\n");
+
+ pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
+ xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
+
+ /* Find any debug ports */
+ return xhci_pci_reinit(xhci, pdev);
+}
+
+static const struct hc_driver xhci_pci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "xHCI Host Controller",
+ .hcd_priv_size = sizeof(struct xhci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = xhci_irq,
+ .flags = HCD_MEMORY | HCD_USB3,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = xhci_pci_setup,
+ .start = xhci_run,
+ /* suspend and resume implemented later */
+ .stop = xhci_stop,
+ .shutdown = xhci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = xhci_urb_enqueue,
+ .urb_dequeue = xhci_urb_dequeue,
+ .alloc_dev = xhci_alloc_dev,
+ .free_dev = xhci_free_dev,
+ .add_endpoint = xhci_add_endpoint,
+ .drop_endpoint = xhci_drop_endpoint,
+ .check_bandwidth = xhci_check_bandwidth,
+ .reset_bandwidth = xhci_reset_bandwidth,
+ .address_device = xhci_address_device,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = xhci_get_frame,
+
+ /* Root hub support */
+ .hub_control = xhci_hub_control,
+ .hub_status_data = xhci_hub_status_data,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* PCI driver selection metadata; PCI hotplugging uses this */
+static const struct pci_device_id pci_ids[] = { {
+ /* handle any USB 3.0 xHCI controller */
+ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
+ .driver_data = (unsigned long) &xhci_pci_hc_driver,
+ },
+ { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver xhci_pci_driver = {
+ .name = (char *) hcd_name,
+ .id_table = pci_ids,
+
+ .probe = usb_hcd_pci_probe,
+ .remove = usb_hcd_pci_remove,
+ /* suspend and resume implemented later */
+
+ .shutdown = usb_hcd_pci_shutdown,
+};
+
+int xhci_register_pci()
+{
+ return pci_register_driver(&xhci_pci_driver);
+}
+
+void xhci_unregister_pci()
+{
+ pci_unregister_driver(&xhci_pci_driver);
+}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
new file mode 100644
index 0000000..02d8198
--- /dev/null
+++ b/drivers/usb/host/xhci-ring.c
@@ -0,0 +1,1648 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Ring initialization rules:
+ * 1. Each segment is initialized to zero, except for link TRBs.
+ * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or
+ * Consumer Cycle State (CCS), depending on ring function.
+ * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
+ *
+ * Ring behavior rules:
+ * 1. A ring is empty if enqueue == dequeue. This means there will always be at
+ * least one free TRB in the ring. This is useful if you want to turn that
+ * into a link TRB and expand the ring.
+ * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
+ * link TRB, then load the pointer with the address in the link TRB. If the
+ * link TRB had its toggle bit set, you may need to update the ring cycle
+ * state (see cycle bit rules). You may have to do this multiple times
+ * until you reach a non-link TRB.
+ * 3. A ring is full if enqueue++ (for the definition of increment above)
+ * equals the dequeue pointer.
+ *
+ * Cycle bit rules:
+ * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
+ * in a link TRB, it must toggle the ring cycle state.
+ * 2. When a producer increments an enqueue pointer and encounters a toggle bit
+ * in a link TRB, it must toggle the ring cycle state.
+ *
+ * Producer rules:
+ * 1. Check if ring is full before you enqueue.
+ * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
+ * Update enqueue pointer between each write (which may update the ring
+ * cycle state).
+ * 3. Notify consumer. If SW is producer, it rings the doorbell for command
+ * and endpoint rings. If HC is the producer for the event ring,
+ * and it generates an interrupt according to interrupt modulation rules.
+ *
+ * Consumer rules:
+ * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state,
+ * the TRB is owned by the consumer.
+ * 2. Update dequeue pointer (which may update the ring cycle state) and
+ * continue processing TRBs until you reach a TRB which is not owned by you.
+ * 3. Notify the producer. SW is the consumer for the event ring, and it
+ * updates event ring dequeue pointer. HC is the consumer for the command and
+ * endpoint rings; it generates events on the event ring for these.
+ */
+
+#include <linux/scatterlist.h>
+#include "xhci.h"
+
+/*
+ * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
+ * address of the TRB.
+ */
+dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
+ union xhci_trb *trb)
+{
+ unsigned long segment_offset;
+
+ if (!seg || !trb || trb < seg->trbs)
+ return 0;
+ /* offset in TRBs */
+ segment_offset = trb - seg->trbs;
+ if (segment_offset > TRBS_PER_SEGMENT)
+ return 0;
+ return seg->dma + (segment_offset * sizeof(*trb));
+}
+
+/* Does this link TRB point to the first segment in a ring,
+ * or was the previous TRB the last TRB on the last segment in the ERST?
+ */
+static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ struct xhci_segment *seg, union xhci_trb *trb)
+{
+ if (ring == xhci->event_ring)
+ return (trb == &seg->trbs[TRBS_PER_SEGMENT]) &&
+ (seg->next == xhci->event_ring->first_seg);
+ else
+ return trb->link.control & LINK_TOGGLE;
+}
+
+/* Is this TRB a link TRB or was the last TRB the last TRB in this event ring
+ * segment? I.e. would the updated event TRB pointer step off the end of the
+ * event seg?
+ */
+static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ struct xhci_segment *seg, union xhci_trb *trb)
+{
+ if (ring == xhci->event_ring)
+ return trb == &seg->trbs[TRBS_PER_SEGMENT];
+ else
+ return (trb->link.control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK);
+}
+
+/* Updates trb to point to the next TRB in the ring, and updates seg if the next
+ * TRB is in a new segment. This does not skip over link TRBs, and it does not
+ * effect the ring dequeue or enqueue pointers.
+ */
+static void next_trb(struct xhci_hcd *xhci,
+ struct xhci_ring *ring,
+ struct xhci_segment **seg,
+ union xhci_trb **trb)
+{
+ if (last_trb(xhci, ring, *seg, *trb)) {
+ *seg = (*seg)->next;
+ *trb = ((*seg)->trbs);
+ } else {
+ *trb = (*trb)++;
+ }
+}
+
+/*
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ * Don't make a ring full of link TRBs. That would be dumb and this would loop.
+ */
+static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
+{
+ union xhci_trb *next = ++(ring->dequeue);
+
+ ring->deq_updates++;
+ /* Update the dequeue pointer further if that was a link TRB or we're at
+ * the end of an event ring segment (which doesn't have link TRBS)
+ */
+ while (last_trb(xhci, ring, ring->deq_seg, next)) {
+ if (consumer && last_trb_on_last_seg(xhci, ring, ring->deq_seg, next)) {
+ ring->cycle_state = (ring->cycle_state ? 0 : 1);
+ if (!in_interrupt())
+ xhci_dbg(xhci, "Toggle cycle state for ring %p = %i\n",
+ ring,
+ (unsigned int) ring->cycle_state);
+ }
+ ring->deq_seg = ring->deq_seg->next;
+ ring->dequeue = ring->deq_seg->trbs;
+ next = ring->dequeue;
+ }
+}
+
+/*
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ * Don't make a ring full of link TRBs. That would be dumb and this would loop.
+ *
+ * If we've just enqueued a TRB that is in the middle of a TD (meaning the
+ * chain bit is set), then set the chain bit in all the following link TRBs.
+ * If we've enqueued the last TRB in a TD, make sure the following link TRBs
+ * have their chain bit cleared (so that each Link TRB is a separate TD).
+ *
+ * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
+ * set, but other sections talk about dealing with the chain bit set.
+ * Assume section 6.4.4.1 is wrong, and the chain bit can be set in a Link TRB.
+ */
+static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
+{
+ u32 chain;
+ union xhci_trb *next;
+
+ chain = ring->enqueue->generic.field[3] & TRB_CHAIN;
+ next = ++(ring->enqueue);
+
+ ring->enq_updates++;
+ /* Update the dequeue pointer further if that was a link TRB or we're at
+ * the end of an event ring segment (which doesn't have link TRBS)
+ */
+ while (last_trb(xhci, ring, ring->enq_seg, next)) {
+ if (!consumer) {
+ if (ring != xhci->event_ring) {
+ next->link.control &= ~TRB_CHAIN;
+ next->link.control |= chain;
+ /* Give this link TRB to the hardware */
+ wmb();
+ if (next->link.control & TRB_CYCLE)
+ next->link.control &= (u32) ~TRB_CYCLE;
+ else
+ next->link.control |= (u32) TRB_CYCLE;
+ }
+ /* Toggle the cycle bit after the last ring segment. */
+ if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
+ ring->cycle_state = (ring->cycle_state ? 0 : 1);
+ if (!in_interrupt())
+ xhci_dbg(xhci, "Toggle cycle state for ring %p = %i\n",
+ ring,
+ (unsigned int) ring->cycle_state);
+ }
+ }
+ ring->enq_seg = ring->enq_seg->next;
+ ring->enqueue = ring->enq_seg->trbs;
+ next = ring->enqueue;
+ }
+}
+
+/*
+ * Check to see if there's room to enqueue num_trbs on the ring. See rules
+ * above.
+ * FIXME: this would be simpler and faster if we just kept track of the number
+ * of free TRBs in a ring.
+ */
+static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ unsigned int num_trbs)
+{
+ int i;
+ union xhci_trb *enq = ring->enqueue;
+ struct xhci_segment *enq_seg = ring->enq_seg;
+
+ /* Check if ring is empty */
+ if (enq == ring->dequeue)
+ return 1;
+ /* Make sure there's an extra empty TRB available */
+ for (i = 0; i <= num_trbs; ++i) {
+ if (enq == ring->dequeue)
+ return 0;
+ enq++;
+ while (last_trb(xhci, ring, enq_seg, enq)) {
+ enq_seg = enq_seg->next;
+ enq = enq_seg->trbs;
+ }
+ }
+ return 1;
+}
+
+void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
+{
+ u32 temp;
+ dma_addr_t deq;
+
+ deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
+ xhci->event_ring->dequeue);
+ if (deq == 0 && !in_interrupt())
+ xhci_warn(xhci, "WARN something wrong with SW event ring "
+ "dequeue ptr.\n");
+ /* Update HC event ring dequeue pointer */
+ temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+ temp &= ERST_PTR_MASK;
+ if (!in_interrupt())
+ xhci_dbg(xhci, "// Write event ring dequeue pointer\n");
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
+ xhci_writel(xhci, (deq & ~ERST_PTR_MASK) | temp,
+ &xhci->ir_set->erst_dequeue[0]);
+}
+
+/* Ring the host controller doorbell after placing a command on the ring */
+void xhci_ring_cmd_db(struct xhci_hcd *xhci)
+{
+ u32 temp;
+
+ xhci_dbg(xhci, "// Ding dong!\n");
+ temp = xhci_readl(xhci, &xhci->dba->doorbell[0]) & DB_MASK;
+ xhci_writel(xhci, temp | DB_TARGET_HOST, &xhci->dba->doorbell[0]);
+ /* Flush PCI posted writes */
+ xhci_readl(xhci, &xhci->dba->doorbell[0]);
+}
+
+static void ring_ep_doorbell(struct xhci_hcd *xhci,
+ unsigned int slot_id,
+ unsigned int ep_index)
+{
+ struct xhci_ring *ep_ring;
+ u32 field;
+ __u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
+
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+ /* Don't ring the doorbell for this endpoint if there are pending
+ * cancellations because the we don't want to interrupt processing.
+ */
+ if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)) {
+ field = xhci_readl(xhci, db_addr) & DB_MASK;
+ xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr);
+ /* Flush PCI posted writes - FIXME Matthew Wilcox says this
+ * isn't time-critical and we shouldn't make the CPU wait for
+ * the flush.
+ */
+ xhci_readl(xhci, db_addr);
+ }
+}
+
+/*
+ * Find the segment that trb is in. Start searching in start_seg.
+ * If we must move past a segment that has a link TRB with a toggle cycle state
+ * bit set, then we will toggle the value pointed at by cycle_state.
+ */
+static struct xhci_segment *find_trb_seg(
+ struct xhci_segment *start_seg,
+ union xhci_trb *trb, int *cycle_state)
+{
+ struct xhci_segment *cur_seg = start_seg;
+ struct xhci_generic_trb *generic_trb;
+
+ while (cur_seg->trbs > trb ||
+ &cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) {
+ generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic;
+ if (TRB_TYPE(generic_trb->field[3]) == TRB_LINK &&
+ (generic_trb->field[3] & LINK_TOGGLE))
+ *cycle_state = ~(*cycle_state) & 0x1;
+ cur_seg = cur_seg->next;
+ if (cur_seg == start_seg)
+ /* Looped over the entire list. Oops! */
+ return 0;
+ }
+ return cur_seg;
+}
+
+struct dequeue_state {
+ struct xhci_segment *new_deq_seg;
+ union xhci_trb *new_deq_ptr;
+ int new_cycle_state;
+};
+
+/*
+ * Move the xHC's endpoint ring dequeue pointer past cur_td.
+ * Record the new state of the xHC's endpoint ring dequeue segment,
+ * dequeue pointer, and new consumer cycle state in state.
+ * Update our internal representation of the ring's dequeue pointer.
+ *
+ * We do this in three jumps:
+ * - First we update our new ring state to be the same as when the xHC stopped.
+ * - Then we traverse the ring to find the segment that contains
+ * the last TRB in the TD. We toggle the xHC's new cycle state when we pass
+ * any link TRBs with the toggle cycle bit set.
+ * - Finally we move the dequeue state one TRB further, toggling the cycle bit
+ * if we've moved it past a link TRB with the toggle cycle bit set.
+ */
+static void find_new_dequeue_state(struct xhci_hcd *xhci,
+ unsigned int slot_id, unsigned int ep_index,
+ struct xhci_td *cur_td, struct dequeue_state *state)
+{
+ struct xhci_virt_device *dev = xhci->devs[slot_id];
+ struct xhci_ring *ep_ring = dev->ep_rings[ep_index];
+ struct xhci_generic_trb *trb;
+
+ state->new_cycle_state = 0;
+ state->new_deq_seg = find_trb_seg(cur_td->start_seg,
+ ep_ring->stopped_trb,
+ &state->new_cycle_state);
+ if (!state->new_deq_seg)
+ BUG();
+ /* Dig out the cycle state saved by the xHC during the stop ep cmd */
+ state->new_cycle_state = 0x1 & dev->out_ctx->ep[ep_index].deq[0];
+
+ state->new_deq_ptr = cur_td->last_trb;
+ state->new_deq_seg = find_trb_seg(state->new_deq_seg,
+ state->new_deq_ptr,
+ &state->new_cycle_state);
+ if (!state->new_deq_seg)
+ BUG();
+
+ trb = &state->new_deq_ptr->generic;
+ if (TRB_TYPE(trb->field[3]) == TRB_LINK &&
+ (trb->field[3] & LINK_TOGGLE))
+ state->new_cycle_state = ~(state->new_cycle_state) & 0x1;
+ next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
+
+ /* Don't update the ring cycle state for the producer (us). */
+ ep_ring->dequeue = state->new_deq_ptr;
+ ep_ring->deq_seg = state->new_deq_seg;
+}
+
+static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+ struct xhci_td *cur_td)
+{
+ struct xhci_segment *cur_seg;
+ union xhci_trb *cur_trb;
+
+ for (cur_seg = cur_td->start_seg, cur_trb = cur_td->first_trb;
+ true;
+ next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
+ if ((cur_trb->generic.field[3] & TRB_TYPE_BITMASK) ==
+ TRB_TYPE(TRB_LINK)) {
+ /* Unchain any chained Link TRBs, but
+ * leave the pointers intact.
+ */
+ cur_trb->generic.field[3] &= ~TRB_CHAIN;
+ xhci_dbg(xhci, "Cancel (unchain) link TRB\n");
+ xhci_dbg(xhci, "Address = %p (0x%llx dma); "
+ "in seg %p (0x%llx dma)\n",
+ cur_trb,
+ (unsigned long long)xhci_trb_virt_to_dma(cur_seg, cur_trb),
+ cur_seg,
+ (unsigned long long)cur_seg->dma);
+ } else {
+ cur_trb->generic.field[0] = 0;
+ cur_trb->generic.field[1] = 0;
+ cur_trb->generic.field[2] = 0;
+ /* Preserve only the cycle bit of this TRB */
+ cur_trb->generic.field[3] &= TRB_CYCLE;
+ cur_trb->generic.field[3] |= TRB_TYPE(TRB_TR_NOOP);
+ xhci_dbg(xhci, "Cancel TRB %p (0x%llx dma) "
+ "in seg %p (0x%llx dma)\n",
+ cur_trb,
+ (unsigned long long)xhci_trb_virt_to_dma(cur_seg, cur_trb),
+ cur_seg,
+ (unsigned long long)cur_seg->dma);
+ }
+ if (cur_trb == cur_td->last_trb)
+ break;
+ }
+}
+
+static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index, struct xhci_segment *deq_seg,
+ union xhci_trb *deq_ptr, u32 cycle_state);
+
+/*
+ * When we get a command completion for a Stop Endpoint Command, we need to
+ * unlink any cancelled TDs from the ring. There are two ways to do that:
+ *
+ * 1. If the HW was in the middle of processing the TD that needs to be
+ * cancelled, then we must move the ring's dequeue pointer past the last TRB
+ * in the TD with a Set Dequeue Pointer Command.
+ * 2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
+ * bit cleared) so that the HW will skip over them.
+ */
+static void handle_stopped_endpoint(struct xhci_hcd *xhci,
+ union xhci_trb *trb)
+{
+ unsigned int slot_id;
+ unsigned int ep_index;
+ struct xhci_ring *ep_ring;
+ struct list_head *entry;
+ struct xhci_td *cur_td = 0;
+ struct xhci_td *last_unlinked_td;
+
+ struct dequeue_state deq_state;
+#ifdef CONFIG_USB_HCD_STAT
+ ktime_t stop_time = ktime_get();
+#endif
+
+ memset(&deq_state, 0, sizeof(deq_state));
+ slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
+ ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+
+ if (list_empty(&ep_ring->cancelled_td_list))
+ return;
+
+ /* Fix up the ep ring first, so HW stops executing cancelled TDs.
+ * We have the xHCI lock, so nothing can modify this list until we drop
+ * it. We're also in the event handler, so we can't get re-interrupted
+ * if another Stop Endpoint command completes
+ */
+ list_for_each(entry, &ep_ring->cancelled_td_list) {
+ cur_td = list_entry(entry, struct xhci_td, cancelled_td_list);
+ xhci_dbg(xhci, "Cancelling TD starting at %p, 0x%llx (dma).\n",
+ cur_td->first_trb,
+ (unsigned long long)xhci_trb_virt_to_dma(cur_td->start_seg, cur_td->first_trb));
+ /*
+ * If we stopped on the TD we need to cancel, then we have to
+ * move the xHC endpoint ring dequeue pointer past this TD.
+ */
+ if (cur_td == ep_ring->stopped_td)
+ find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
+ &deq_state);
+ else
+ td_to_noop(xhci, ep_ring, cur_td);
+ /*
+ * The event handler won't see a completion for this TD anymore,
+ * so remove it from the endpoint ring's TD list. Keep it in
+ * the cancelled TD list for URB completion later.
+ */
+ list_del(&cur_td->td_list);
+ ep_ring->cancels_pending--;
+ }
+ last_unlinked_td = cur_td;
+
+ /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
+ if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
+ xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
+ "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
+ deq_state.new_deq_seg,
+ (unsigned long long)deq_state.new_deq_seg->dma,
+ deq_state.new_deq_ptr,
+ (unsigned long long)xhci_trb_virt_to_dma(deq_state.new_deq_seg, deq_state.new_deq_ptr),
+ deq_state.new_cycle_state);
+ queue_set_tr_deq(xhci, slot_id, ep_index,
+ deq_state.new_deq_seg,
+ deq_state.new_deq_ptr,
+ (u32) deq_state.new_cycle_state);
+ /* Stop the TD queueing code from ringing the doorbell until
+ * this command completes. The HC won't set the dequeue pointer
+ * if the ring is running, and ringing the doorbell starts the
+ * ring running.
+ */
+ ep_ring->state |= SET_DEQ_PENDING;
+ xhci_ring_cmd_db(xhci);
+ } else {
+ /* Otherwise just ring the doorbell to restart the ring */
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+ }
+
+ /*
+ * Drop the lock and complete the URBs in the cancelled TD list.
+ * New TDs to be cancelled might be added to the end of the list before
+ * we can complete all the URBs for the TDs we already unlinked.
+ * So stop when we've completed the URB for the last TD we unlinked.
+ */
+ do {
+ cur_td = list_entry(ep_ring->cancelled_td_list.next,
+ struct xhci_td, cancelled_td_list);
+ list_del(&cur_td->cancelled_td_list);
+
+ /* Clean up the cancelled URB */
+#ifdef CONFIG_USB_HCD_STAT
+ hcd_stat_update(xhci->tp_stat, cur_td->urb->actual_length,
+ ktime_sub(stop_time, cur_td->start_time));
+#endif
+ cur_td->urb->hcpriv = NULL;
+ usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), cur_td->urb);
+
+ xhci_dbg(xhci, "Giveback cancelled URB %p\n", cur_td->urb);
+ spin_unlock(&xhci->lock);
+ /* Doesn't matter what we pass for status, since the core will
+ * just overwrite it (because the URB has been unlinked).
+ */
+ usb_hcd_giveback_urb(xhci_to_hcd(xhci), cur_td->urb, 0);
+ kfree(cur_td);
+
+ spin_lock(&xhci->lock);
+ } while (cur_td != last_unlinked_td);
+
+ /* Return to the event handler with xhci->lock re-acquired */
+}
+
+/*
+ * When we get a completion for a Set Transfer Ring Dequeue Pointer command,
+ * we need to clear the set deq pending flag in the endpoint ring state, so that
+ * the TD queueing code can ring the doorbell again. We also need to ring the
+ * endpoint doorbell to restart the ring, but only if there aren't more
+ * cancellations pending.
+ */
+static void handle_set_deq_completion(struct xhci_hcd *xhci,
+ struct xhci_event_cmd *event,
+ union xhci_trb *trb)
+{
+ unsigned int slot_id;
+ unsigned int ep_index;
+ struct xhci_ring *ep_ring;
+ struct xhci_virt_device *dev;
+
+ slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
+ ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+ dev = xhci->devs[slot_id];
+ ep_ring = dev->ep_rings[ep_index];
+
+ if (GET_COMP_CODE(event->status) != COMP_SUCCESS) {
+ unsigned int ep_state;
+ unsigned int slot_state;
+
+ switch (GET_COMP_CODE(event->status)) {
+ case COMP_TRB_ERR:
+ xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because "
+ "of stream ID configuration\n");
+ break;
+ case COMP_CTX_STATE:
+ xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due "
+ "to incorrect slot or ep state.\n");
+ ep_state = dev->out_ctx->ep[ep_index].ep_info;
+ ep_state &= EP_STATE_MASK;
+ slot_state = dev->out_ctx->slot.dev_state;
+ slot_state = GET_SLOT_STATE(slot_state);
+ xhci_dbg(xhci, "Slot state = %u, EP state = %u\n",
+ slot_state, ep_state);
+ break;
+ case COMP_EBADSLT:
+ xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because "
+ "slot %u was not enabled.\n", slot_id);
+ break;
+ default:
+ xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown "
+ "completion code of %u.\n",
+ GET_COMP_CODE(event->status));
+ break;
+ }
+ /* OK what do we do now? The endpoint state is hosed, and we
+ * should never get to this point if the synchronization between
+ * queueing, and endpoint state are correct. This might happen
+ * if the device gets disconnected after we've finished
+ * cancelling URBs, which might not be an error...
+ */
+ } else {
+ xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq[0] = 0x%x, "
+ "deq[1] = 0x%x.\n",
+ dev->out_ctx->ep[ep_index].deq[0],
+ dev->out_ctx->ep[ep_index].deq[1]);
+ }
+
+ ep_ring->state &= ~SET_DEQ_PENDING;
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+}
+
+
+static void handle_cmd_completion(struct xhci_hcd *xhci,
+ struct xhci_event_cmd *event)
+{
+ int slot_id = TRB_TO_SLOT_ID(event->flags);
+ u64 cmd_dma;
+ dma_addr_t cmd_dequeue_dma;
+
+ cmd_dma = (((u64) event->cmd_trb[1]) << 32) + event->cmd_trb[0];
+ cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+ xhci->cmd_ring->dequeue);
+ /* Is the command ring deq ptr out of sync with the deq seg ptr? */
+ if (cmd_dequeue_dma == 0) {
+ xhci->error_bitmask |= 1 << 4;
+ return;
+ }
+ /* Does the DMA address match our internal dequeue pointer address? */
+ if (cmd_dma != (u64) cmd_dequeue_dma) {
+ xhci->error_bitmask |= 1 << 5;
+ return;
+ }
+ switch (xhci->cmd_ring->dequeue->generic.field[3] & TRB_TYPE_BITMASK) {
+ case TRB_TYPE(TRB_ENABLE_SLOT):
+ if (GET_COMP_CODE(event->status) == COMP_SUCCESS)
+ xhci->slot_id = slot_id;
+ else
+ xhci->slot_id = 0;
+ complete(&xhci->addr_dev);
+ break;
+ case TRB_TYPE(TRB_DISABLE_SLOT):
+ if (xhci->devs[slot_id])
+ xhci_free_virt_device(xhci, slot_id);
+ break;
+ case TRB_TYPE(TRB_CONFIG_EP):
+ xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
+ complete(&xhci->devs[slot_id]->cmd_completion);
+ break;
+ case TRB_TYPE(TRB_ADDR_DEV):
+ xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
+ complete(&xhci->addr_dev);
+ break;
+ case TRB_TYPE(TRB_STOP_RING):
+ handle_stopped_endpoint(xhci, xhci->cmd_ring->dequeue);
+ break;
+ case TRB_TYPE(TRB_SET_DEQ):
+ handle_set_deq_completion(xhci, event, xhci->cmd_ring->dequeue);
+ break;
+ case TRB_TYPE(TRB_CMD_NOOP):
+ ++xhci->noops_handled;
+ break;
+ default:
+ /* Skip over unknown commands on the event ring */
+ xhci->error_bitmask |= 1 << 6;
+ break;
+ }
+ inc_deq(xhci, xhci->cmd_ring, false);
+}
+
+static void handle_port_status(struct xhci_hcd *xhci,
+ union xhci_trb *event)
+{
+ u32 port_id;
+
+ /* Port status change events always have a successful completion code */
+ if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) {
+ xhci_warn(xhci, "WARN: xHC returned failed port status event\n");
+ xhci->error_bitmask |= 1 << 8;
+ }
+ /* FIXME: core doesn't care about all port link state changes yet */
+ port_id = GET_PORT_ID(event->generic.field[0]);
+ xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id);
+
+ /* Update event ring dequeue pointer before dropping the lock */
+ inc_deq(xhci, xhci->event_ring, true);
+ xhci_set_hc_event_deq(xhci);
+
+ spin_unlock(&xhci->lock);
+ /* Pass this up to the core */
+ usb_hcd_poll_rh_status(xhci_to_hcd(xhci));
+ spin_lock(&xhci->lock);
+}
+
+/*
+ * This TD is defined by the TRBs starting at start_trb in start_seg and ending
+ * at end_trb, which may be in another segment. If the suspect DMA address is a
+ * TRB in this TD, this function returns that TRB's segment. Otherwise it
+ * returns 0.
+ */
+static struct xhci_segment *trb_in_td(
+ struct xhci_segment *start_seg,
+ union xhci_trb *start_trb,
+ union xhci_trb *end_trb,
+ dma_addr_t suspect_dma)
+{
+ dma_addr_t start_dma;
+ dma_addr_t end_seg_dma;
+ dma_addr_t end_trb_dma;
+ struct xhci_segment *cur_seg;
+
+ start_dma = xhci_trb_virt_to_dma(start_seg, start_trb);
+ cur_seg = start_seg;
+
+ do {
+ /* We may get an event for a Link TRB in the middle of a TD */
+ end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
+ &start_seg->trbs[TRBS_PER_SEGMENT - 1]);
+ /* If the end TRB isn't in this segment, this is set to 0 */
+ end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
+
+ if (end_trb_dma > 0) {
+ /* The end TRB is in this segment, so suspect should be here */
+ if (start_dma <= end_trb_dma) {
+ if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
+ return cur_seg;
+ } else {
+ /* Case for one segment with
+ * a TD wrapped around to the top
+ */
+ if ((suspect_dma >= start_dma &&
+ suspect_dma <= end_seg_dma) ||
+ (suspect_dma >= cur_seg->dma &&
+ suspect_dma <= end_trb_dma))
+ return cur_seg;
+ }
+ return 0;
+ } else {
+ /* Might still be somewhere in this segment */
+ if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
+ return cur_seg;
+ }
+ cur_seg = cur_seg->next;
+ start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
+ } while (1);
+
+}
+
+/*
+ * If this function returns an error condition, it means it got a Transfer
+ * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
+ * At this point, the host controller is probably hosed and should be reset.
+ */
+static int handle_tx_event(struct xhci_hcd *xhci,
+ struct xhci_transfer_event *event)
+{
+ struct xhci_virt_device *xdev;
+ struct xhci_ring *ep_ring;
+ int ep_index;
+ struct xhci_td *td = 0;
+ dma_addr_t event_dma;
+ struct xhci_segment *event_seg;
+ union xhci_trb *event_trb;
+ struct urb *urb = 0;
+ int status = -EINPROGRESS;
+
+ xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
+ if (!xdev) {
+ xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
+ return -ENODEV;
+ }
+
+ /* Endpoint ID is 1 based, our index is zero based */
+ ep_index = TRB_TO_EP_ID(event->flags) - 1;
+ ep_ring = xdev->ep_rings[ep_index];
+ if (!ep_ring || (xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
+ xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n");
+ return -ENODEV;
+ }
+
+ event_dma = event->buffer[0];
+ if (event->buffer[1] != 0)
+ xhci_warn(xhci, "WARN ignoring upper 32-bits of 64-bit TRB dma address\n");
+
+ /* This TRB should be in the TD at the head of this ring's TD list */
+ if (list_empty(&ep_ring->td_list)) {
+ xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
+ TRB_TO_SLOT_ID(event->flags), ep_index);
+ xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+ (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
+ xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
+ urb = NULL;
+ goto cleanup;
+ }
+ td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
+
+ /* Is this a TRB in the currently executing TD? */
+ event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
+ td->last_trb, event_dma);
+ if (!event_seg) {
+ /* HC is busted, give up! */
+ xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
+ return -ESHUTDOWN;
+ }
+ event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
+ xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+ (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
+ xhci_dbg(xhci, "Offset 0x00 (buffer[0]) = 0x%x\n",
+ (unsigned int) event->buffer[0]);
+ xhci_dbg(xhci, "Offset 0x04 (buffer[0]) = 0x%x\n",
+ (unsigned int) event->buffer[1]);
+ xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n",
+ (unsigned int) event->transfer_len);
+ xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n",
+ (unsigned int) event->flags);
+
+ /* Look for common error cases */
+ switch (GET_COMP_CODE(event->transfer_len)) {
+ /* Skip codes that require special handling depending on
+ * transfer type
+ */
+ case COMP_SUCCESS:
+ case COMP_SHORT_TX:
+ break;
+ case COMP_STOP:
+ xhci_dbg(xhci, "Stopped on Transfer TRB\n");
+ break;
+ case COMP_STOP_INVAL:
+ xhci_dbg(xhci, "Stopped on No-op or Link TRB\n");
+ break;
+ case COMP_STALL:
+ xhci_warn(xhci, "WARN: Stalled endpoint\n");
+ status = -EPIPE;
+ break;
+ case COMP_TRB_ERR:
+ xhci_warn(xhci, "WARN: TRB error on endpoint\n");
+ status = -EILSEQ;
+ break;
+ case COMP_TX_ERR:
+ xhci_warn(xhci, "WARN: transfer error on endpoint\n");
+ status = -EPROTO;
+ break;
+ case COMP_DB_ERR:
+ xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
+ status = -ENOSR;
+ break;
+ default:
+ xhci_warn(xhci, "ERROR Unknown event condition, HC probably busted\n");
+ urb = NULL;
+ goto cleanup;
+ }
+ /* Now update the urb's actual_length and give back to the core */
+ /* Was this a control transfer? */
+ if (usb_endpoint_xfer_control(&td->urb->ep->desc)) {
+ xhci_debug_trb(xhci, xhci->event_ring->dequeue);
+ switch (GET_COMP_CODE(event->transfer_len)) {
+ case COMP_SUCCESS:
+ if (event_trb == ep_ring->dequeue) {
+ xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n");
+ status = -ESHUTDOWN;
+ } else if (event_trb != td->last_trb) {
+ xhci_warn(xhci, "WARN: Success on ctrl data TRB without IOC set??\n");
+ status = -ESHUTDOWN;
+ } else {
+ xhci_dbg(xhci, "Successful control transfer!\n");
+ status = 0;
+ }
+ break;
+ case COMP_SHORT_TX:
+ xhci_warn(xhci, "WARN: short transfer on control ep\n");
+ status = -EREMOTEIO;
+ break;
+ default:
+ /* Others already handled above */
+ break;
+ }
+ /*
+ * Did we transfer any data, despite the errors that might have
+ * happened? I.e. did we get past the setup stage?
+ */
+ if (event_trb != ep_ring->dequeue) {
+ /* The event was for the status stage */
+ if (event_trb == td->last_trb) {
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length;
+ } else {
+ /* Maybe the event was for the data stage? */
+ if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+ /* We didn't stop on a link TRB in the middle */
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length -
+ TRB_LEN(event->transfer_len);
+ }
+ }
+ } else {
+ switch (GET_COMP_CODE(event->transfer_len)) {
+ case COMP_SUCCESS:
+ /* Double check that the HW transferred everything. */
+ if (event_trb != td->last_trb) {
+ xhci_warn(xhci, "WARN Successful completion "
+ "on short TX\n");
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
+ } else {
+ xhci_dbg(xhci, "Successful bulk transfer!\n");
+ status = 0;
+ }
+ break;
+ case COMP_SHORT_TX:
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
+ break;
+ default:
+ /* Others already handled above */
+ break;
+ }
+ dev_dbg(&td->urb->dev->dev,
+ "ep %#x - asked for %d bytes, "
+ "%d bytes untransferred\n",
+ td->urb->ep->desc.bEndpointAddress,
+ td->urb->transfer_buffer_length,
+ TRB_LEN(event->transfer_len));
+ /* Fast path - was this the last TRB in the TD for this URB? */
+ if (event_trb == td->last_trb) {
+ if (TRB_LEN(event->transfer_len) != 0) {
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length -
+ TRB_LEN(event->transfer_len);
+ if (td->urb->actual_length < 0) {
+ xhci_warn(xhci, "HC gave bad length "
+ "of %d bytes left\n",
+ TRB_LEN(event->transfer_len));
+ td->urb->actual_length = 0;
+ }
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
+ } else {
+ td->urb->actual_length = td->urb->transfer_buffer_length;
+ /* Ignore a short packet completion if the
+ * untransferred length was zero.
+ */
+ status = 0;
+ }
+ } else {
+ /* Slow path - walk the list, starting from the dequeue
+ * pointer, to get the actual length transferred.
+ */
+ union xhci_trb *cur_trb;
+ struct xhci_segment *cur_seg;
+
+ td->urb->actual_length = 0;
+ for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
+ cur_trb != event_trb;
+ next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
+ if (TRB_TYPE(cur_trb->generic.field[3]) != TRB_TR_NOOP &&
+ TRB_TYPE(cur_trb->generic.field[3]) != TRB_LINK)
+ td->urb->actual_length +=
+ TRB_LEN(cur_trb->generic.field[2]);
+ }
+ /* If the ring didn't stop on a Link or No-op TRB, add
+ * in the actual bytes transferred from the Normal TRB
+ */
+ if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+ td->urb->actual_length +=
+ TRB_LEN(cur_trb->generic.field[2]) -
+ TRB_LEN(event->transfer_len);
+ }
+ }
+ /* The Endpoint Stop Command completion will take care of
+ * any stopped TDs. A stopped TD may be restarted, so don't update the
+ * ring dequeue pointer or take this TD off any lists yet.
+ */
+ if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL ||
+ GET_COMP_CODE(event->transfer_len) == COMP_STOP) {
+ ep_ring->stopped_td = td;
+ ep_ring->stopped_trb = event_trb;
+ } else {
+ /* Update ring dequeue pointer */
+ while (ep_ring->dequeue != td->last_trb)
+ inc_deq(xhci, ep_ring, false);
+ inc_deq(xhci, ep_ring, false);
+
+ /* Clean up the endpoint's TD list */
+ urb = td->urb;
+ list_del(&td->td_list);
+ /* Was this TD slated to be cancelled but completed anyway? */
+ if (!list_empty(&td->cancelled_td_list)) {
+ list_del(&td->cancelled_td_list);
+ ep_ring->cancels_pending--;
+ }
+ kfree(td);
+ urb->hcpriv = NULL;
+ }
+cleanup:
+ inc_deq(xhci, xhci->event_ring, true);
+ xhci_set_hc_event_deq(xhci);
+
+ /* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
+ if (urb) {
+ usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
+ spin_unlock(&xhci->lock);
+ usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
+ spin_lock(&xhci->lock);
+ }
+ return 0;
+}
+
+/*
+ * This function handles all OS-owned events on the event ring. It may drop
+ * xhci->lock between event processing (e.g. to pass up port status changes).
+ */
+void xhci_handle_event(struct xhci_hcd *xhci)
+{
+ union xhci_trb *event;
+ int update_ptrs = 1;
+ int ret;
+
+ if (!xhci->event_ring || !xhci->event_ring->dequeue) {
+ xhci->error_bitmask |= 1 << 1;
+ return;
+ }
+
+ event = xhci->event_ring->dequeue;
+ /* Does the HC or OS own the TRB? */
+ if ((event->event_cmd.flags & TRB_CYCLE) !=
+ xhci->event_ring->cycle_state) {
+ xhci->error_bitmask |= 1 << 2;
+ return;
+ }
+
+ /* FIXME: Handle more event types. */
+ switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) {
+ case TRB_TYPE(TRB_COMPLETION):
+ handle_cmd_completion(xhci, &event->event_cmd);
+ break;
+ case TRB_TYPE(TRB_PORT_STATUS):
+ handle_port_status(xhci, event);
+ update_ptrs = 0;
+ break;
+ case TRB_TYPE(TRB_TRANSFER):
+ ret = handle_tx_event(xhci, &event->trans_event);
+ if (ret < 0)
+ xhci->error_bitmask |= 1 << 9;
+ else
+ update_ptrs = 0;
+ break;
+ default:
+ xhci->error_bitmask |= 1 << 3;
+ }
+
+ if (update_ptrs) {
+ /* Update SW and HC event ring dequeue pointer */
+ inc_deq(xhci, xhci->event_ring, true);
+ xhci_set_hc_event_deq(xhci);
+ }
+ /* Are there more items on the event ring? */
+ xhci_handle_event(xhci);
+}
+
+/**** Endpoint Ring Operations ****/
+
+/*
+ * Generic function for queueing a TRB on a ring.
+ * The caller must have checked to make sure there's room on the ring.
+ */
+static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ bool consumer,
+ u32 field1, u32 field2, u32 field3, u32 field4)
+{
+ struct xhci_generic_trb *trb;
+
+ trb = &ring->enqueue->generic;
+ trb->field[0] = field1;
+ trb->field[1] = field2;
+ trb->field[2] = field3;
+ trb->field[3] = field4;
+ inc_enq(xhci, ring, consumer);
+}
+
+/*
+ * Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
+ * FIXME allocate segments if the ring is full.
+ */
+static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+ u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
+{
+ /* Make sure the endpoint has been added to xHC schedule */
+ xhci_dbg(xhci, "Endpoint state = 0x%x\n", ep_state);
+ switch (ep_state) {
+ case EP_STATE_DISABLED:
+ /*
+ * USB core changed config/interfaces without notifying us,
+ * or hardware is reporting the wrong state.
+ */
+ xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
+ return -ENOENT;
+ case EP_STATE_HALTED:
+ case EP_STATE_ERROR:
+ xhci_warn(xhci, "WARN waiting for halt or error on ep "
+ "to be cleared\n");
+ /* FIXME event handling code for error needs to clear it */
+ /* XXX not sure if this should be -ENOENT or not */
+ return -EINVAL;
+ case EP_STATE_STOPPED:
+ case EP_STATE_RUNNING:
+ break;
+ default:
+ xhci_err(xhci, "ERROR unknown endpoint state for ep\n");
+ /*
+ * FIXME issue Configure Endpoint command to try to get the HC
+ * back into a known state.
+ */
+ return -EINVAL;
+ }
+ if (!room_on_ring(xhci, ep_ring, num_trbs)) {
+ /* FIXME allocate more room */
+ xhci_err(xhci, "ERROR no room on ep ring\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static int prepare_transfer(struct xhci_hcd *xhci,
+ struct xhci_virt_device *xdev,
+ unsigned int ep_index,
+ unsigned int num_trbs,
+ struct urb *urb,
+ struct xhci_td **td,
+ gfp_t mem_flags)
+{
+ int ret;
+
+ ret = prepare_ring(xhci, xdev->ep_rings[ep_index],
+ xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK,
+ num_trbs, mem_flags);
+ if (ret)
+ return ret;
+ *td = kzalloc(sizeof(struct xhci_td), mem_flags);
+ if (!*td)
+ return -ENOMEM;
+ INIT_LIST_HEAD(&(*td)->td_list);
+ INIT_LIST_HEAD(&(*td)->cancelled_td_list);
+
+ ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb);
+ if (unlikely(ret)) {
+ kfree(*td);
+ return ret;
+ }
+
+ (*td)->urb = urb;
+ urb->hcpriv = (void *) (*td);
+ /* Add this TD to the tail of the endpoint ring's TD list */
+ list_add_tail(&(*td)->td_list, &xdev->ep_rings[ep_index]->td_list);
+ (*td)->start_seg = xdev->ep_rings[ep_index]->enq_seg;
+ (*td)->first_trb = xdev->ep_rings[ep_index]->enqueue;
+
+ return 0;
+}
+
+static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
+{
+ int num_sgs, num_trbs, running_total, temp, i;
+ struct scatterlist *sg;
+
+ sg = NULL;
+ num_sgs = urb->num_sgs;
+ temp = urb->transfer_buffer_length;
+
+ xhci_dbg(xhci, "count sg list trbs: \n");
+ num_trbs = 0;
+ for_each_sg(urb->sg->sg, sg, num_sgs, i) {
+ unsigned int previous_total_trbs = num_trbs;
+ unsigned int len = sg_dma_len(sg);
+
+ /* Scatter gather list entries may cross 64KB boundaries */
+ running_total = TRB_MAX_BUFF_SIZE -
+ (sg_dma_address(sg) & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ if (running_total != 0)
+ num_trbs++;
+
+ /* How many more 64KB chunks to transfer, how many more TRBs? */
+ while (running_total < sg_dma_len(sg)) {
+ num_trbs++;
+ running_total += TRB_MAX_BUFF_SIZE;
+ }
+ xhci_dbg(xhci, " sg #%d: dma = %#llx, len = %#x (%d), num_trbs = %d\n",
+ i, (unsigned long long)sg_dma_address(sg),
+ len, len, num_trbs - previous_total_trbs);
+
+ len = min_t(int, len, temp);
+ temp -= len;
+ if (temp == 0)
+ break;
+ }
+ xhci_dbg(xhci, "\n");
+ if (!in_interrupt())
+ dev_dbg(&urb->dev->dev, "ep %#x - urb len = %d, sglist used, num_trbs = %d\n",
+ urb->ep->desc.bEndpointAddress,
+ urb->transfer_buffer_length,
+ num_trbs);
+ return num_trbs;
+}
+
+static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
+{
+ if (num_trbs != 0)
+ dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
+ "TRBs, %d left\n", __func__,
+ urb->ep->desc.bEndpointAddress, num_trbs);
+ if (running_total != urb->transfer_buffer_length)
+ dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
+ "queued %#x (%d), asked for %#x (%d)\n",
+ __func__,
+ urb->ep->desc.bEndpointAddress,
+ running_total, running_total,
+ urb->transfer_buffer_length,
+ urb->transfer_buffer_length);
+}
+
+static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index, int start_cycle,
+ struct xhci_generic_trb *start_trb, struct xhci_td *td)
+{
+ /*
+ * Pass all the TRBs to the hardware at once and make sure this write
+ * isn't reordered.
+ */
+ wmb();
+ start_trb->field[3] |= start_cycle;
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+}
+
+static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index)
+{
+ struct xhci_ring *ep_ring;
+ unsigned int num_trbs;
+ struct xhci_td *td;
+ struct scatterlist *sg;
+ int num_sgs;
+ int trb_buff_len, this_sg_len, running_total;
+ bool first_trb;
+ u64 addr;
+
+ struct xhci_generic_trb *start_trb;
+ int start_cycle;
+
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+ num_trbs = count_sg_trbs_needed(xhci, urb);
+ num_sgs = urb->num_sgs;
+
+ trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
+ ep_index, num_trbs, urb, &td, mem_flags);
+ if (trb_buff_len < 0)
+ return trb_buff_len;
+ /*
+ * Don't give the first TRB to the hardware (by toggling the cycle bit)
+ * until we've finished creating all the other TRBs. The ring's cycle
+ * state may change as we enqueue the other TRBs, so save it too.
+ */
+ start_trb = &ep_ring->enqueue->generic;
+ start_cycle = ep_ring->cycle_state;
+
+ running_total = 0;
+ /*
+ * How much data is in the first TRB?
+ *
+ * There are three forces at work for TRB buffer pointers and lengths:
+ * 1. We don't want to walk off the end of this sg-list entry buffer.
+ * 2. The transfer length that the driver requested may be smaller than
+ * the amount of memory allocated for this scatter-gather list.
+ * 3. TRBs buffers can't cross 64KB boundaries.
+ */
+ sg = urb->sg->sg;
+ addr = (u64) sg_dma_address(sg);
+ this_sg_len = sg_dma_len(sg);
+ trb_buff_len = TRB_MAX_BUFF_SIZE -
+ (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
+ if (trb_buff_len > urb->transfer_buffer_length)
+ trb_buff_len = urb->transfer_buffer_length;
+ xhci_dbg(xhci, "First length to xfer from 1st sglist entry = %u\n",
+ trb_buff_len);
+
+ first_trb = true;
+ /* Queue the first TRB, even if it's zero-length */
+ do {
+ u32 field = 0;
+
+ /* Don't change the cycle bit of the first TRB until later */
+ if (first_trb)
+ first_trb = false;
+ else
+ field |= ep_ring->cycle_state;
+
+ /* Chain all the TRBs together; clear the chain bit in the last
+ * TRB to indicate it's the last TRB in the chain.
+ */
+ if (num_trbs > 1) {
+ field |= TRB_CHAIN;
+ } else {
+ /* FIXME - add check for ZERO_PACKET flag before this */
+ td->last_trb = ep_ring->enqueue;
+ field |= TRB_IOC;
+ }
+ xhci_dbg(xhci, " sg entry: dma = %#x, len = %#x (%d), "
+ "64KB boundary at %#x, end dma = %#x\n",
+ (unsigned int) addr, trb_buff_len, trb_buff_len,
+ (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
+ (unsigned int) addr + trb_buff_len);
+ if (TRB_MAX_BUFF_SIZE -
+ (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)) < trb_buff_len) {
+ xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n");
+ xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n",
+ (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
+ (unsigned int) addr + trb_buff_len);
+ }
+ queue_trb(xhci, ep_ring, false,
+ (u32) addr,
+ (u32) ((u64) addr >> 32),
+ TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+ /* We always want to know if the TRB was short,
+ * or we won't get an event when it completes.
+ * (Unless we use event data TRBs, which are a
+ * waste of space and HC resources.)
+ */
+ field | TRB_ISP | TRB_TYPE(TRB_NORMAL));
+ --num_trbs;
+ running_total += trb_buff_len;
+
+ /* Calculate length for next transfer --
+ * Are we done queueing all the TRBs for this sg entry?
+ */
+ this_sg_len -= trb_buff_len;
+ if (this_sg_len == 0) {
+ --num_sgs;
+ if (num_sgs == 0)
+ break;
+ sg = sg_next(sg);
+ addr = (u64) sg_dma_address(sg);
+ this_sg_len = sg_dma_len(sg);
+ } else {
+ addr += trb_buff_len;
+ }
+
+ trb_buff_len = TRB_MAX_BUFF_SIZE -
+ (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
+ if (running_total + trb_buff_len > urb->transfer_buffer_length)
+ trb_buff_len =
+ urb->transfer_buffer_length - running_total;
+ } while (running_total < urb->transfer_buffer_length);
+
+ check_trb_math(urb, num_trbs, running_total);
+ giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td);
+ return 0;
+}
+
+/* This is very similar to what ehci-q.c qtd_fill() does */
+int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index)
+{
+ struct xhci_ring *ep_ring;
+ struct xhci_td *td;
+ int num_trbs;
+ struct xhci_generic_trb *start_trb;
+ bool first_trb;
+ int start_cycle;
+ u32 field;
+
+ int running_total, trb_buff_len, ret;
+ u64 addr;
+
+ if (urb->sg)
+ return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
+
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+
+ num_trbs = 0;
+ /* How much data is (potentially) left before the 64KB boundary? */
+ running_total = TRB_MAX_BUFF_SIZE -
+ (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+
+ /* If there's some data on this 64KB chunk, or we have to send a
+ * zero-length transfer, we need at least one TRB
+ */
+ if (running_total != 0 || urb->transfer_buffer_length == 0)
+ num_trbs++;
+ /* How many more 64KB chunks to transfer, how many more TRBs? */
+ while (running_total < urb->transfer_buffer_length) {
+ num_trbs++;
+ running_total += TRB_MAX_BUFF_SIZE;
+ }
+ /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
+
+ if (!in_interrupt())
+ dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d), addr = %#llx, num_trbs = %d\n",
+ urb->ep->desc.bEndpointAddress,
+ urb->transfer_buffer_length,
+ urb->transfer_buffer_length,
+ (unsigned long long)urb->transfer_dma,
+ num_trbs);
+
+ ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
+ num_trbs, urb, &td, mem_flags);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Don't give the first TRB to the hardware (by toggling the cycle bit)
+ * until we've finished creating all the other TRBs. The ring's cycle
+ * state may change as we enqueue the other TRBs, so save it too.
+ */
+ start_trb = &ep_ring->enqueue->generic;
+ start_cycle = ep_ring->cycle_state;
+
+ running_total = 0;
+ /* How much data is in the first TRB? */
+ addr = (u64) urb->transfer_dma;
+ trb_buff_len = TRB_MAX_BUFF_SIZE -
+ (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ if (urb->transfer_buffer_length < trb_buff_len)
+ trb_buff_len = urb->transfer_buffer_length;
+
+ first_trb = true;
+
+ /* Queue the first TRB, even if it's zero-length */
+ do {
+ field = 0;
+
+ /* Don't change the cycle bit of the first TRB until later */
+ if (first_trb)
+ first_trb = false;
+ else
+ field |= ep_ring->cycle_state;
+
+ /* Chain all the TRBs together; clear the chain bit in the last
+ * TRB to indicate it's the last TRB in the chain.
+ */
+ if (num_trbs > 1) {
+ field |= TRB_CHAIN;
+ } else {
+ /* FIXME - add check for ZERO_PACKET flag before this */
+ td->last_trb = ep_ring->enqueue;
+ field |= TRB_IOC;
+ }
+ queue_trb(xhci, ep_ring, false,
+ (u32) addr,
+ (u32) ((u64) addr >> 32),
+ TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+ /* We always want to know if the TRB was short,
+ * or we won't get an event when it completes.
+ * (Unless we use event data TRBs, which are a
+ * waste of space and HC resources.)
+ */
+ field | TRB_ISP | TRB_TYPE(TRB_NORMAL));
+ --num_trbs;
+ running_total += trb_buff_len;
+
+ /* Calculate length for next transfer */
+ addr += trb_buff_len;
+ trb_buff_len = urb->transfer_buffer_length - running_total;
+ if (trb_buff_len > TRB_MAX_BUFF_SIZE)
+ trb_buff_len = TRB_MAX_BUFF_SIZE;
+ } while (running_total < urb->transfer_buffer_length);
+
+ check_trb_math(urb, num_trbs, running_total);
+ giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td);
+ return 0;
+}
+
+/* Caller must have locked xhci->lock */
+int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index)
+{
+ struct xhci_ring *ep_ring;
+ int num_trbs;
+ int ret;
+ struct usb_ctrlrequest *setup;
+ struct xhci_generic_trb *start_trb;
+ int start_cycle;
+ u32 field;
+ struct xhci_td *td;
+
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+
+ /*
+ * Need to copy setup packet into setup TRB, so we can't use the setup
+ * DMA address.
+ */
+ if (!urb->setup_packet)
+ return -EINVAL;
+
+ if (!in_interrupt())
+ xhci_dbg(xhci, "Queueing ctrl tx for slot id %d, ep %d\n",
+ slot_id, ep_index);
+ /* 1 TRB for setup, 1 for status */
+ num_trbs = 2;
+ /*
+ * Don't need to check if we need additional event data and normal TRBs,
+ * since data in control transfers will never get bigger than 16MB
+ * XXX: can we get a buffer that crosses 64KB boundaries?
+ */
+ if (urb->transfer_buffer_length > 0)
+ num_trbs++;
+ ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, num_trbs,
+ urb, &td, mem_flags);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Don't give the first TRB to the hardware (by toggling the cycle bit)
+ * until we've finished creating all the other TRBs. The ring's cycle
+ * state may change as we enqueue the other TRBs, so save it too.
+ */
+ start_trb = &ep_ring->enqueue->generic;
+ start_cycle = ep_ring->cycle_state;
+
+ /* Queue setup TRB - see section 6.4.1.2.1 */
+ /* FIXME better way to translate setup_packet into two u32 fields? */
+ setup = (struct usb_ctrlrequest *) urb->setup_packet;
+ queue_trb(xhci, ep_ring, false,
+ /* FIXME endianness is probably going to bite my ass here. */
+ setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
+ setup->wIndex | setup->wLength << 16,
+ TRB_LEN(8) | TRB_INTR_TARGET(0),
+ /* Immediate data in pointer */
+ TRB_IDT | TRB_TYPE(TRB_SETUP));
+
+ /* If there's data, queue data TRBs */
+ field = 0;
+ if (urb->transfer_buffer_length > 0) {
+ if (setup->bRequestType & USB_DIR_IN)
+ field |= TRB_DIR_IN;
+ queue_trb(xhci, ep_ring, false,
+ lower_32_bits(urb->transfer_dma),
+ upper_32_bits(urb->transfer_dma),
+ TRB_LEN(urb->transfer_buffer_length) | TRB_INTR_TARGET(0),
+ /* Event on short tx */
+ field | TRB_ISP | TRB_TYPE(TRB_DATA) | ep_ring->cycle_state);
+ }
+
+ /* Save the DMA address of the last TRB in the TD */
+ td->last_trb = ep_ring->enqueue;
+
+ /* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
+ /* If the device sent data, the status stage is an OUT transfer */
+ if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN)
+ field = 0;
+ else
+ field = TRB_DIR_IN;
+ queue_trb(xhci, ep_ring, false,
+ 0,
+ 0,
+ TRB_INTR_TARGET(0),
+ /* Event on completion */
+ field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
+
+ giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td);
+ return 0;
+}
+
+/**** Command Ring Operations ****/
+
+/* Generic function for queueing a command TRB on the command ring */
+static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 field3, u32 field4)
+{
+ if (!room_on_ring(xhci, xhci->cmd_ring, 1)) {
+ if (!in_interrupt())
+ xhci_err(xhci, "ERR: No room for command on command ring\n");
+ return -ENOMEM;
+ }
+ queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
+ field4 | xhci->cmd_ring->cycle_state);
+ return 0;
+}
+
+/* Queue a no-op command on the command ring */
+static int queue_cmd_noop(struct xhci_hcd *xhci)
+{
+ return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP));
+}
+
+/*
+ * Place a no-op command on the command ring to test the command and
+ * event ring.
+ */
+void *xhci_setup_one_noop(struct xhci_hcd *xhci)
+{
+ if (queue_cmd_noop(xhci) < 0)
+ return NULL;
+ xhci->noops_submitted++;
+ return xhci_ring_cmd_db;
+}
+
+/* Queue a slot enable or disable request on the command ring */
+int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
+{
+ return queue_command(xhci, 0, 0, 0,
+ TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id));
+}
+
+/* Queue an address device command TRB */
+int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+ u32 slot_id)
+{
+ return queue_command(xhci, in_ctx_ptr, 0, 0,
+ TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id));
+}
+
+/* Queue a configure endpoint command TRB */
+int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+ u32 slot_id)
+{
+ return queue_command(xhci, in_ctx_ptr, 0, 0,
+ TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id));
+}
+
+int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index)
+{
+ u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+ u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+ u32 type = TRB_TYPE(TRB_STOP_RING);
+
+ return queue_command(xhci, 0, 0, 0,
+ trb_slot_id | trb_ep_index | type);
+}
+
+/* Set Transfer Ring Dequeue Pointer command.
+ * This should not be used for endpoints that have streams enabled.
+ */
+static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index, struct xhci_segment *deq_seg,
+ union xhci_trb *deq_ptr, u32 cycle_state)
+{
+ dma_addr_t addr;
+ u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+ u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+ u32 type = TRB_TYPE(TRB_SET_DEQ);
+
+ addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
+ if (addr == 0)
+ xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
+ xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
+ deq_seg, deq_ptr);
+ return queue_command(xhci, (u32) addr | cycle_state, 0, 0,
+ trb_slot_id | trb_ep_index | type);
+}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
new file mode 100644
index 0000000..8936eeb
--- /dev/null
+++ b/drivers/usb/host/xhci.h
@@ -0,0 +1,1157 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_XHCI_HCD_H
+#define __LINUX_XHCI_HCD_H
+
+#include <linux/usb.h>
+#include <linux/timer.h>
+
+#include "../core/hcd.h"
+/* Code sharing between pci-quirks and xhci hcd */
+#include "xhci-ext-caps.h"
+
+/* xHCI PCI Configuration Registers */
+#define XHCI_SBRN_OFFSET (0x60)
+
+/* Max number of USB devices for any host controller - limit in section 6.1 */
+#define MAX_HC_SLOTS 256
+/* Section 5.3.3 - MaxPorts */
+#define MAX_HC_PORTS 127
+
+/*
+ * xHCI register interface.
+ * This corresponds to the eXtensible Host Controller Interface (xHCI)
+ * Revision 0.95 specification
+ *
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers. Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+
+/**
+ * struct xhci_cap_regs - xHCI Host Controller Capability Registers.
+ * @hc_capbase: length of the capabilities register and HC version number
+ * @hcs_params1: HCSPARAMS1 - Structural Parameters 1
+ * @hcs_params2: HCSPARAMS2 - Structural Parameters 2
+ * @hcs_params3: HCSPARAMS3 - Structural Parameters 3
+ * @hcc_params: HCCPARAMS - Capability Parameters
+ * @db_off: DBOFF - Doorbell array offset
+ * @run_regs_off: RTSOFF - Runtime register space offset
+ */
+struct xhci_cap_regs {
+ u32 hc_capbase;
+ u32 hcs_params1;
+ u32 hcs_params2;
+ u32 hcs_params3;
+ u32 hcc_params;
+ u32 db_off;
+ u32 run_regs_off;
+ /* Reserved up to (CAPLENGTH - 0x1C) */
+};
+
+/* hc_capbase bitmasks */
+/* bits 7:0 - how long is the Capabilities register */
+#define HC_LENGTH(p) XHCI_HC_LENGTH(p)
+/* bits 31:16 */
+#define HC_VERSION(p) (((p) >> 16) & 0xffff)
+
+/* HCSPARAMS1 - hcs_params1 - bitmasks */
+/* bits 0:7, Max Device Slots */
+#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff)
+#define HCS_SLOTS_MASK 0xff
+/* bits 8:18, Max Interrupters */
+#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff)
+/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
+#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f)
+
+/* HCSPARAMS2 - hcs_params2 - bitmasks */
+/* bits 0:3, frames or uframes that SW needs to queue transactions
+ * ahead of the HW to meet periodic deadlines */
+#define HCS_IST(p) (((p) >> 0) & 0xf)
+/* bits 4:7, max number of Event Ring segments */
+#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
+/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
+/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
+
+/* HCSPARAMS3 - hcs_params3 - bitmasks */
+/* bits 0:7, Max U1 to U0 latency for the roothub ports */
+#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff)
+/* bits 16:31, Max U2 to U0 latency for the roothub ports */
+#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff)
+
+/* HCCPARAMS - hcc_params - bitmasks */
+/* true: HC can use 64-bit address pointers */
+#define HCC_64BIT_ADDR(p) ((p) & (1 << 0))
+/* true: HC can do bandwidth negotiation */
+#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1))
+/* true: HC uses 64-byte Device Context structures
+ * FIXME 64-byte context structures aren't supported yet.
+ */
+#define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2))
+/* true: HC has port power switches */
+#define HCC_PPC(p) ((p) & (1 << 3))
+/* true: HC has port indicators */
+#define HCS_INDICATOR(p) ((p) & (1 << 4))
+/* true: HC has Light HC Reset Capability */
+#define HCC_LIGHT_RESET(p) ((p) & (1 << 5))
+/* true: HC supports latency tolerance messaging */
+#define HCC_LTC(p) ((p) & (1 << 6))
+/* true: no secondary Stream ID Support */
+#define HCC_NSS(p) ((p) & (1 << 7))
+/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
+#define HCC_MAX_PSA (1 << ((((p) >> 12) & 0xf) + 1))
+/* Extended Capabilities pointer from PCI base - section 5.3.6 */
+#define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p)
+
+/* db_off bitmask - bits 0:1 reserved */
+#define DBOFF_MASK (~0x3)
+
+/* run_regs_off bitmask - bits 0:4 reserved */
+#define RTSOFF_MASK (~0x1f)
+
+
+/* Number of registers per port */
+#define NUM_PORT_REGS 4
+
+/**
+ * struct xhci_op_regs - xHCI Host Controller Operational Registers.
+ * @command: USBCMD - xHC command register
+ * @status: USBSTS - xHC status register
+ * @page_size: This indicates the page size that the host controller
+ * supports. If bit n is set, the HC supports a page size
+ * of 2^(n+12), up to a 128MB page size.
+ * 4K is the minimum page size.
+ * @cmd_ring: CRP - 64-bit Command Ring Pointer
+ * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer
+ * @config_reg: CONFIG - Configure Register
+ * @port_status_base: PORTSCn - base address for Port Status and Control
+ * Each port has a Port Status and Control register,
+ * followed by a Port Power Management Status and Control
+ * register, a Port Link Info register, and a reserved
+ * register.
+ * @port_power_base: PORTPMSCn - base address for
+ * Port Power Management Status and Control
+ * @port_link_base: PORTLIn - base address for Port Link Info (current
+ * Link PM state and control) for USB 2.1 and USB 3.0
+ * devices.
+ */
+struct xhci_op_regs {
+ u32 command;
+ u32 status;
+ u32 page_size;
+ u32 reserved1;
+ u32 reserved2;
+ u32 dev_notification;
+ u32 cmd_ring[2];
+ /* rsvd: offset 0x20-2F */
+ u32 reserved3[4];
+ u32 dcbaa_ptr[2];
+ u32 config_reg;
+ /* rsvd: offset 0x3C-3FF */
+ u32 reserved4[241];
+ /* port 1 registers, which serve as a base address for other ports */
+ u32 port_status_base;
+ u32 port_power_base;
+ u32 port_link_base;
+ u32 reserved5;
+ /* registers for ports 2-255 */
+ u32 reserved6[NUM_PORT_REGS*254];
+};
+
+/* USBCMD - USB command - command bitmasks */
+/* start/stop HC execution - do not write unless HC is halted*/
+#define CMD_RUN XHCI_CMD_RUN
+/* Reset HC - resets internal HC state machine and all registers (except
+ * PCI config regs). HC does NOT drive a USB reset on the downstream ports.
+ * The xHCI driver must reinitialize the xHC after setting this bit.
+ */
+#define CMD_RESET (1 << 1)
+/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
+#define CMD_EIE XHCI_CMD_EIE
+/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
+#define CMD_HSEIE XHCI_CMD_HSEIE
+/* bits 4:6 are reserved (and should be preserved on writes). */
+/* light reset (port status stays unchanged) - reset completed when this is 0 */
+#define CMD_LRESET (1 << 7)
+/* FIXME: ignoring host controller save/restore state for now. */
+#define CMD_CSS (1 << 8)
+#define CMD_CRS (1 << 9)
+/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
+#define CMD_EWE XHCI_CMD_EWE
+/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
+ * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
+ * '0' means the xHC can power it off if all ports are in the disconnect,
+ * disabled, or powered-off state.
+ */
+#define CMD_PM_INDEX (1 << 11)
+/* bits 12:31 are reserved (and should be preserved on writes). */
+
+/* USBSTS - USB status - status bitmasks */
+/* HC not running - set to 1 when run/stop bit is cleared. */
+#define STS_HALT XHCI_STS_HALT
+/* serious error, e.g. PCI parity error. The HC will clear the run/stop bit. */
+#define STS_FATAL (1 << 2)
+/* event interrupt - clear this prior to clearing any IP flags in IR set*/
+#define STS_EINT (1 << 3)
+/* port change detect */
+#define STS_PORT (1 << 4)
+/* bits 5:7 reserved and zeroed */
+/* save state status - '1' means xHC is saving state */
+#define STS_SAVE (1 << 8)
+/* restore state status - '1' means xHC is restoring state */
+#define STS_RESTORE (1 << 9)
+/* true: save or restore error */
+#define STS_SRE (1 << 10)
+/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
+#define STS_CNR XHCI_STS_CNR
+/* true: internal Host Controller Error - SW needs to reset and reinitialize */
+#define STS_HCE (1 << 12)
+/* bits 13:31 reserved and should be preserved */
+
+/*
+ * DNCTRL - Device Notification Control Register - dev_notification bitmasks
+ * Generate a device notification event when the HC sees a transaction with a
+ * notification type that matches a bit set in this bit field.
+ */
+#define DEV_NOTE_MASK (0xffff)
+#define ENABLE_DEV_NOTE(x) (1 << x)
+/* Most of the device notification types should only be used for debug.
+ * SW does need to pay attention to function wake notifications.
+ */
+#define DEV_NOTE_FWAKE ENABLE_DEV_NOTE(1)
+
+/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
+/* bit 0 is the command ring cycle state */
+/* stop ring operation after completion of the currently executing command */
+#define CMD_RING_PAUSE (1 << 1)
+/* stop ring immediately - abort the currently executing command */
+#define CMD_RING_ABORT (1 << 2)
+/* true: command ring is running */
+#define CMD_RING_RUNNING (1 << 3)
+/* bits 4:5 reserved and should be preserved */
+/* Command Ring pointer - bit mask for the lower 32 bits. */
+#define CMD_RING_ADDR_MASK (0xffffffc0)
+
+/* CONFIG - Configure Register - config_reg bitmasks */
+/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
+#define MAX_DEVS(p) ((p) & 0xff)
+/* bits 8:31 - reserved and should be preserved */
+
+/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
+/* true: device connected */
+#define PORT_CONNECT (1 << 0)
+/* true: port enabled */
+#define PORT_PE (1 << 1)
+/* bit 2 reserved and zeroed */
+/* true: port has an over-current condition */
+#define PORT_OC (1 << 3)
+/* true: port reset signaling asserted */
+#define PORT_RESET (1 << 4)
+/* Port Link State - bits 5:8
+ * A read gives the current link PM state of the port,
+ * a write with Link State Write Strobe set sets the link state.
+ */
+/* true: port has power (see HCC_PPC) */
+#define PORT_POWER (1 << 9)
+/* bits 10:13 indicate device speed:
+ * 0 - undefined speed - port hasn't be initialized by a reset yet
+ * 1 - full speed
+ * 2 - low speed
+ * 3 - high speed
+ * 4 - super speed
+ * 5-15 reserved
+ */
+#define DEV_SPEED_MASK (0xf << 10)
+#define XDEV_FS (0x1 << 10)
+#define XDEV_LS (0x2 << 10)
+#define XDEV_HS (0x3 << 10)
+#define XDEV_SS (0x4 << 10)
+#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10))
+#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
+#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS)
+#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
+#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
+/* Bits 20:23 in the Slot Context are the speed for the device */
+#define SLOT_SPEED_FS (XDEV_FS << 10)
+#define SLOT_SPEED_LS (XDEV_LS << 10)
+#define SLOT_SPEED_HS (XDEV_HS << 10)
+#define SLOT_SPEED_SS (XDEV_SS << 10)
+/* Port Indicator Control */
+#define PORT_LED_OFF (0 << 14)
+#define PORT_LED_AMBER (1 << 14)
+#define PORT_LED_GREEN (2 << 14)
+#define PORT_LED_MASK (3 << 14)
+/* Port Link State Write Strobe - set this when changing link state */
+#define PORT_LINK_STROBE (1 << 16)
+/* true: connect status change */
+#define PORT_CSC (1 << 17)
+/* true: port enable change */
+#define PORT_PEC (1 << 18)
+/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port
+ * into an enabled state, and the device into the default state. A "warm" reset
+ * also resets the link, forcing the device through the link training sequence.
+ * SW can also look at the Port Reset register to see when warm reset is done.
+ */
+#define PORT_WRC (1 << 19)
+/* true: over-current change */
+#define PORT_OCC (1 << 20)
+/* true: reset change - 1 to 0 transition of PORT_RESET */
+#define PORT_RC (1 << 21)
+/* port link status change - set on some port link state transitions:
+ * Transition Reason
+ * ------------------------------------------------------------------------------
+ * - U3 to Resume Wakeup signaling from a device
+ * - Resume to Recovery to U0 USB 3.0 device resume
+ * - Resume to U0 USB 2.0 device resume
+ * - U3 to Recovery to U0 Software resume of USB 3.0 device complete
+ * - U3 to U0 Software resume of USB 2.0 device complete
+ * - U2 to U0 L1 resume of USB 2.1 device complete
+ * - U0 to U0 (???) L1 entry rejection by USB 2.1 device
+ * - U0 to disabled L1 entry error with USB 2.1 device
+ * - Any state to inactive Error on USB 3.0 port
+ */
+#define PORT_PLC (1 << 22)
+/* port configure error change - port failed to configure its link partner */
+#define PORT_CEC (1 << 23)
+/* bit 24 reserved */
+/* wake on connect (enable) */
+#define PORT_WKCONN_E (1 << 25)
+/* wake on disconnect (enable) */
+#define PORT_WKDISC_E (1 << 26)
+/* wake on over-current (enable) */
+#define PORT_WKOC_E (1 << 27)
+/* bits 28:29 reserved */
+/* true: device is removable - for USB 3.0 roothub emulation */
+#define PORT_DEV_REMOVE (1 << 30)
+/* Initiate a warm port reset - complete when PORT_WRC is '1' */
+#define PORT_WR (1 << 31)
+
+/* Port Power Management Status and Control - port_power_base bitmasks */
+/* Inactivity timer value for transitions into U1, in microseconds.
+ * Timeout can be up to 127us. 0xFF means an infinite timeout.
+ */
+#define PORT_U1_TIMEOUT(p) ((p) & 0xff)
+/* Inactivity timer value for transitions into U2 */
+#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8)
+/* Bits 24:31 for port testing */
+
+
+/**
+ * struct xhci_intr_reg - Interrupt Register Set
+ * @irq_pending: IMAN - Interrupt Management Register. Used to enable
+ * interrupts and check for pending interrupts.
+ * @irq_control: IMOD - Interrupt Moderation Register.
+ * Used to throttle interrupts.
+ * @erst_size: Number of segments in the Event Ring Segment Table (ERST).
+ * @erst_base: ERST base address.
+ * @erst_dequeue: Event ring dequeue pointer.
+ *
+ * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
+ * Ring Segment Table (ERST) associated with it. The event ring is comprised of
+ * multiple segments of the same size. The HC places events on the ring and
+ * "updates the Cycle bit in the TRBs to indicate to software the current
+ * position of the Enqueue Pointer." The HCD (Linux) processes those events and
+ * updates the dequeue pointer.
+ */
+struct xhci_intr_reg {
+ u32 irq_pending;
+ u32 irq_control;
+ u32 erst_size;
+ u32 rsvd;
+ u32 erst_base[2];
+ u32 erst_dequeue[2];
+};
+
+/* irq_pending bitmasks */
+#define ER_IRQ_PENDING(p) ((p) & 0x1)
+/* bits 2:31 need to be preserved */
+/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
+#define ER_IRQ_CLEAR(p) ((p) & 0xfffffffe)
+#define ER_IRQ_ENABLE(p) ((ER_IRQ_CLEAR(p)) | 0x2)
+#define ER_IRQ_DISABLE(p) ((ER_IRQ_CLEAR(p)) & ~(0x2))
+
+/* irq_control bitmasks */
+/* Minimum interval between interrupts (in 250ns intervals). The interval
+ * between interrupts will be longer if there are no events on the event ring.
+ * Default is 4000 (1 ms).
+ */
+#define ER_IRQ_INTERVAL_MASK (0xffff)
+/* Counter used to count down the time to the next interrupt - HW use only */
+#define ER_IRQ_COUNTER_MASK (0xffff << 16)
+
+/* erst_size bitmasks */
+/* Preserve bits 16:31 of erst_size */
+#define ERST_SIZE_MASK (0xffff << 16)
+
+/* erst_dequeue bitmasks */
+/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
+ * where the current dequeue pointer lies. This is an optional HW hint.
+ */
+#define ERST_DESI_MASK (0x7)
+/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
+ * a work queue (or delayed service routine)?
+ */
+#define ERST_EHB (1 << 3)
+#define ERST_PTR_MASK (0xf)
+
+/**
+ * struct xhci_run_regs
+ * @microframe_index:
+ * MFINDEX - current microframe number
+ *
+ * Section 5.5 Host Controller Runtime Registers:
+ * "Software should read and write these registers using only Dword (32 bit)
+ * or larger accesses"
+ */
+struct xhci_run_regs {
+ u32 microframe_index;
+ u32 rsvd[7];
+ struct xhci_intr_reg ir_set[128];
+};
+
+/**
+ * struct doorbell_array
+ *
+ * Section 5.6
+ */
+struct xhci_doorbell_array {
+ u32 doorbell[256];
+};
+
+#define DB_TARGET_MASK 0xFFFFFF00
+#define DB_STREAM_ID_MASK 0x0000FFFF
+#define DB_TARGET_HOST 0x0
+#define DB_STREAM_ID_HOST 0x0
+#define DB_MASK (0xff << 8)
+
+/* Endpoint Target - bits 0:7 */
+#define EPI_TO_DB(p) (((p) + 1) & 0xff)
+
+
+/**
+ * struct xhci_slot_ctx
+ * @dev_info: Route string, device speed, hub info, and last valid endpoint
+ * @dev_info2: Max exit latency for device number, root hub port number
+ * @tt_info: tt_info is used to construct split transaction tokens
+ * @dev_state: slot state and device address
+ *
+ * Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context
+ * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
+ * reserved at the end of the slot context for HC internal use.
+ */
+struct xhci_slot_ctx {
+ u32 dev_info;
+ u32 dev_info2;
+ u32 tt_info;
+ u32 dev_state;
+ /* offset 0x10 to 0x1f reserved for HC internal use */
+ u32 reserved[4];
+};
+
+/* dev_info bitmasks */
+/* Route String - 0:19 */
+#define ROUTE_STRING_MASK (0xfffff)
+/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
+#define DEV_SPEED (0xf << 20)
+/* bit 24 reserved */
+/* Is this LS/FS device connected through a HS hub? - bit 25 */
+#define DEV_MTT (0x1 << 25)
+/* Set if the device is a hub - bit 26 */
+#define DEV_HUB (0x1 << 26)
+/* Index of the last valid endpoint context in this device context - 27:31 */
+#define LAST_CTX_MASK (0x1f << 27)
+#define LAST_CTX(p) ((p) << 27)
+#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1)
+#define SLOT_FLAG (1 << 0)
+#define EP0_FLAG (1 << 1)
+
+/* dev_info2 bitmasks */
+/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
+#define MAX_EXIT (0xffff)
+/* Root hub port number that is needed to access the USB device */
+#define ROOT_HUB_PORT(p) (((p) & 0xff) << 16)
+
+/* tt_info bitmasks */
+/*
+ * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
+ * The Slot ID of the hub that isolates the high speed signaling from
+ * this low or full-speed device. '0' if attached to root hub port.
+ */
+#define TT_SLOT (0xff)
+/*
+ * The number of the downstream facing port of the high-speed hub
+ * '0' if the device is not low or full speed.
+ */
+#define TT_PORT (0xff << 8)
+
+/* dev_state bitmasks */
+/* USB device address - assigned by the HC */
+#define DEV_ADDR_MASK (0xff)
+/* bits 8:26 reserved */
+/* Slot state */
+#define SLOT_STATE (0x1f << 27)
+#define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
+
+
+/**
+ * struct xhci_ep_ctx
+ * @ep_info: endpoint state, streams, mult, and interval information.
+ * @ep_info2: information on endpoint type, max packet size, max burst size,
+ * error count, and whether the HC will force an event for all
+ * transactions.
+ * @deq: 64-bit ring dequeue pointer address. If the endpoint only
+ * defines one stream, this points to the endpoint transfer ring.
+ * Otherwise, it points to a stream context array, which has a
+ * ring pointer for each flow.
+ * @tx_info:
+ * Average TRB lengths for the endpoint ring and
+ * max payload within an Endpoint Service Interval Time (ESIT).
+ *
+ * Endpoint Context - section 6.2.1.2. This assumes the HC uses 32-byte context
+ * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
+ * reserved at the end of the endpoint context for HC internal use.
+ */
+struct xhci_ep_ctx {
+ u32 ep_info;
+ u32 ep_info2;
+ u32 deq[2];
+ u32 tx_info;
+ /* offset 0x14 - 0x1f reserved for HC internal use */
+ u32 reserved[3];
+};
+
+/* ep_info bitmasks */
+/*
+ * Endpoint State - bits 0:2
+ * 0 - disabled
+ * 1 - running
+ * 2 - halted due to halt condition - ok to manipulate endpoint ring
+ * 3 - stopped
+ * 4 - TRB error
+ * 5-7 - reserved
+ */
+#define EP_STATE_MASK (0xf)
+#define EP_STATE_DISABLED 0
+#define EP_STATE_RUNNING 1
+#define EP_STATE_HALTED 2
+#define EP_STATE_STOPPED 3
+#define EP_STATE_ERROR 4
+/* Mult - Max number of burtst within an interval, in EP companion desc. */
+#define EP_MULT(p) ((p & 0x3) << 8)
+/* bits 10:14 are Max Primary Streams */
+/* bit 15 is Linear Stream Array */
+/* Interval - period between requests to an endpoint - 125u increments. */
+#define EP_INTERVAL(p) ((p & 0xff) << 16)
+
+/* ep_info2 bitmasks */
+/*
+ * Force Event - generate transfer events for all TRBs for this endpoint
+ * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
+ */
+#define FORCE_EVENT (0x1)
+#define ERROR_COUNT(p) (((p) & 0x3) << 1)
+#define EP_TYPE(p) ((p) << 3)
+#define ISOC_OUT_EP 1
+#define BULK_OUT_EP 2
+#define INT_OUT_EP 3
+#define CTRL_EP 4
+#define ISOC_IN_EP 5
+#define BULK_IN_EP 6
+#define INT_IN_EP 7
+/* bit 6 reserved */
+/* bit 7 is Host Initiate Disable - for disabling stream selection */
+#define MAX_BURST(p) (((p)&0xff) << 8)
+#define MAX_PACKET(p) (((p)&0xffff) << 16)
+
+
+/**
+ * struct xhci_device_control
+ * Input/Output context; see section 6.2.5.
+ *
+ * @drop_context: set the bit of the endpoint context you want to disable
+ * @add_context: set the bit of the endpoint context you want to enable
+ */
+struct xhci_device_control {
+ u32 drop_flags;
+ u32 add_flags;
+ u32 rsvd[6];
+ struct xhci_slot_ctx slot;
+ struct xhci_ep_ctx ep[31];
+};
+
+/* drop context bitmasks */
+#define DROP_EP(x) (0x1 << x)
+/* add context bitmasks */
+#define ADD_EP(x) (0x1 << x)
+
+
+struct xhci_virt_device {
+ /*
+ * Commands to the hardware are passed an "input context" that
+ * tells the hardware what to change in its data structures.
+ * The hardware will return changes in an "output context" that
+ * software must allocate for the hardware. We need to keep
+ * track of input and output contexts separately because
+ * these commands might fail and we don't trust the hardware.
+ */
+ struct xhci_device_control *out_ctx;
+ dma_addr_t out_ctx_dma;
+ /* Used for addressing devices and configuration changes */
+ struct xhci_device_control *in_ctx;
+ dma_addr_t in_ctx_dma;
+ /* FIXME when stream support is added */
+ struct xhci_ring *ep_rings[31];
+ /* Temporary storage in case the configure endpoint command fails and we
+ * have to restore the device state to the previous state
+ */
+ struct xhci_ring *new_ep_rings[31];
+ struct completion cmd_completion;
+ /* Status of the last command issued for this device */
+ u32 cmd_status;
+};
+
+
+/**
+ * struct xhci_device_context_array
+ * @dev_context_ptr array of 64-bit DMA addresses for device contexts
+ */
+struct xhci_device_context_array {
+ /* 64-bit device addresses; we only write 32-bit addresses */
+ u32 dev_context_ptrs[2*MAX_HC_SLOTS];
+ /* private xHCD pointers */
+ dma_addr_t dma;
+};
+/* TODO: write function to set the 64-bit device DMA address */
+/*
+ * TODO: change this to be dynamically sized at HC mem init time since the HC
+ * might not be able to handle the maximum number of devices possible.
+ */
+
+
+struct xhci_stream_ctx {
+ /* 64-bit stream ring address, cycle state, and stream type */
+ u32 stream_ring[2];
+ /* offset 0x14 - 0x1f reserved for HC internal use */
+ u32 reserved[2];
+};
+
+
+struct xhci_transfer_event {
+ /* 64-bit buffer address, or immediate data */
+ u32 buffer[2];
+ u32 transfer_len;
+ /* This field is interpreted differently based on the type of TRB */
+ u32 flags;
+};
+
+/** Transfer Event bit fields **/
+#define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
+
+/* Completion Code - only applicable for some types of TRBs */
+#define COMP_CODE_MASK (0xff << 24)
+#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24)
+#define COMP_SUCCESS 1
+/* Data Buffer Error */
+#define COMP_DB_ERR 2
+/* Babble Detected Error */
+#define COMP_BABBLE 3
+/* USB Transaction Error */
+#define COMP_TX_ERR 4
+/* TRB Error - some TRB field is invalid */
+#define COMP_TRB_ERR 5
+/* Stall Error - USB device is stalled */
+#define COMP_STALL 6
+/* Resource Error - HC doesn't have memory for that device configuration */
+#define COMP_ENOMEM 7
+/* Bandwidth Error - not enough room in schedule for this dev config */
+#define COMP_BW_ERR 8
+/* No Slots Available Error - HC ran out of device slots */
+#define COMP_ENOSLOTS 9
+/* Invalid Stream Type Error */
+#define COMP_STREAM_ERR 10
+/* Slot Not Enabled Error - doorbell rung for disabled device slot */
+#define COMP_EBADSLT 11
+/* Endpoint Not Enabled Error */
+#define COMP_EBADEP 12
+/* Short Packet */
+#define COMP_SHORT_TX 13
+/* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */
+#define COMP_UNDERRUN 14
+/* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */
+#define COMP_OVERRUN 15
+/* Virtual Function Event Ring Full Error */
+#define COMP_VF_FULL 16
+/* Parameter Error - Context parameter is invalid */
+#define COMP_EINVAL 17
+/* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */
+#define COMP_BW_OVER 18
+/* Context State Error - illegal context state transition requested */
+#define COMP_CTX_STATE 19
+/* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */
+#define COMP_PING_ERR 20
+/* Event Ring is full */
+#define COMP_ER_FULL 21
+/* Missed Service Error - HC couldn't service an isoc ep within interval */
+#define COMP_MISSED_INT 23
+/* Successfully stopped command ring */
+#define COMP_CMD_STOP 24
+/* Successfully aborted current command and stopped command ring */
+#define COMP_CMD_ABORT 25
+/* Stopped - transfer was terminated by a stop endpoint command */
+#define COMP_STOP 26
+/* Same as COMP_EP_STOPPED, but the transfered length in the event is invalid */
+#define COMP_STOP_INVAL 27
+/* Control Abort Error - Debug Capability - control pipe aborted */
+#define COMP_DBG_ABORT 28
+/* TRB type 29 and 30 reserved */
+/* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */
+#define COMP_BUFF_OVER 31
+/* Event Lost Error - xHC has an "internal event overrun condition" */
+#define COMP_ISSUES 32
+/* Undefined Error - reported when other error codes don't apply */
+#define COMP_UNKNOWN 33
+/* Invalid Stream ID Error */
+#define COMP_STRID_ERR 34
+/* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
+/* FIXME - check for this */
+#define COMP_2ND_BW_ERR 35
+/* Split Transaction Error */
+#define COMP_SPLIT_ERR 36
+
+struct xhci_link_trb {
+ /* 64-bit segment pointer*/
+ u32 segment_ptr[2];
+ u32 intr_target;
+ u32 control;
+};
+
+/* control bitfields */
+#define LINK_TOGGLE (0x1<<1)
+
+/* Command completion event TRB */
+struct xhci_event_cmd {
+ /* Pointer to command TRB, or the value passed by the event data trb */
+ u32 cmd_trb[2];
+ u32 status;
+ u32 flags;
+};
+
+/* flags bitmasks */
+/* bits 16:23 are the virtual function ID */
+/* bits 24:31 are the slot ID */
+#define TRB_TO_SLOT_ID(p) (((p) & (0xff<<24)) >> 24)
+#define SLOT_ID_FOR_TRB(p) (((p) & 0xff) << 24)
+
+/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
+#define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1)
+#define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16)
+
+
+/* Port Status Change Event TRB fields */
+/* Port ID - bits 31:24 */
+#define GET_PORT_ID(p) (((p) & (0xff << 24)) >> 24)
+
+/* Normal TRB fields */
+/* transfer_len bitmasks - bits 0:16 */
+#define TRB_LEN(p) ((p) & 0x1ffff)
+/* TD size - number of bytes remaining in the TD (including this TRB):
+ * bits 17 - 21. Shift the number of bytes by 10. */
+#define TD_REMAINDER(p) ((((p) >> 10) & 0x1f) << 17)
+/* Interrupter Target - which MSI-X vector to target the completion event at */
+#define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22)
+#define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff)
+
+/* Cycle bit - indicates TRB ownership by HC or HCD */
+#define TRB_CYCLE (1<<0)
+/*
+ * Force next event data TRB to be evaluated before task switch.
+ * Used to pass OS data back after a TD completes.
+ */
+#define TRB_ENT (1<<1)
+/* Interrupt on short packet */
+#define TRB_ISP (1<<2)
+/* Set PCIe no snoop attribute */
+#define TRB_NO_SNOOP (1<<3)
+/* Chain multiple TRBs into a TD */
+#define TRB_CHAIN (1<<4)
+/* Interrupt on completion */
+#define TRB_IOC (1<<5)
+/* The buffer pointer contains immediate data */
+#define TRB_IDT (1<<6)
+
+
+/* Control transfer TRB specific fields */
+#define TRB_DIR_IN (1<<16)
+
+struct xhci_generic_trb {
+ u32 field[4];
+};
+
+union xhci_trb {
+ struct xhci_link_trb link;
+ struct xhci_transfer_event trans_event;
+ struct xhci_event_cmd event_cmd;
+ struct xhci_generic_trb generic;
+};
+
+/* TRB bit mask */
+#define TRB_TYPE_BITMASK (0xfc00)
+#define TRB_TYPE(p) ((p) << 10)
+/* TRB type IDs */
+/* bulk, interrupt, isoc scatter/gather, and control data stage */
+#define TRB_NORMAL 1
+/* setup stage for control transfers */
+#define TRB_SETUP 2
+/* data stage for control transfers */
+#define TRB_DATA 3
+/* status stage for control transfers */
+#define TRB_STATUS 4
+/* isoc transfers */
+#define TRB_ISOC 5
+/* TRB for linking ring segments */
+#define TRB_LINK 6
+#define TRB_EVENT_DATA 7
+/* Transfer Ring No-op (not for the command ring) */
+#define TRB_TR_NOOP 8
+/* Command TRBs */
+/* Enable Slot Command */
+#define TRB_ENABLE_SLOT 9
+/* Disable Slot Command */
+#define TRB_DISABLE_SLOT 10
+/* Address Device Command */
+#define TRB_ADDR_DEV 11
+/* Configure Endpoint Command */
+#define TRB_CONFIG_EP 12
+/* Evaluate Context Command */
+#define TRB_EVAL_CONTEXT 13
+/* Reset Transfer Ring Command */
+#define TRB_RESET_RING 14
+/* Stop Transfer Ring Command */
+#define TRB_STOP_RING 15
+/* Set Transfer Ring Dequeue Pointer Command */
+#define TRB_SET_DEQ 16
+/* Reset Device Command */
+#define TRB_RESET_DEV 17
+/* Force Event Command (opt) */
+#define TRB_FORCE_EVENT 18
+/* Negotiate Bandwidth Command (opt) */
+#define TRB_NEG_BANDWIDTH 19
+/* Set Latency Tolerance Value Command (opt) */
+#define TRB_SET_LT 20
+/* Get port bandwidth Command */
+#define TRB_GET_BW 21
+/* Force Header Command - generate a transaction or link management packet */
+#define TRB_FORCE_HEADER 22
+/* No-op Command - not for transfer rings */
+#define TRB_CMD_NOOP 23
+/* TRB IDs 24-31 reserved */
+/* Event TRBS */
+/* Transfer Event */
+#define TRB_TRANSFER 32
+/* Command Completion Event */
+#define TRB_COMPLETION 33
+/* Port Status Change Event */
+#define TRB_PORT_STATUS 34
+/* Bandwidth Request Event (opt) */
+#define TRB_BANDWIDTH_EVENT 35
+/* Doorbell Event (opt) */
+#define TRB_DOORBELL 36
+/* Host Controller Event */
+#define TRB_HC_EVENT 37
+/* Device Notification Event - device sent function wake notification */
+#define TRB_DEV_NOTE 38
+/* MFINDEX Wrap Event - microframe counter wrapped */
+#define TRB_MFINDEX_WRAP 39
+/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
+
+/*
+ * TRBS_PER_SEGMENT must be a multiple of 4,
+ * since the command ring is 64-byte aligned.
+ * It must also be greater than 16.
+ */
+#define TRBS_PER_SEGMENT 64
+#define SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
+/* TRB buffer pointers can't cross 64KB boundaries */
+#define TRB_MAX_BUFF_SHIFT 16
+#define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT)
+
+struct xhci_segment {
+ union xhci_trb *trbs;
+ /* private to HCD */
+ struct xhci_segment *next;
+ dma_addr_t dma;
+};
+
+struct xhci_td {
+ struct list_head td_list;
+ struct list_head cancelled_td_list;
+ struct urb *urb;
+ struct xhci_segment *start_seg;
+ union xhci_trb *first_trb;
+ union xhci_trb *last_trb;
+};
+
+struct xhci_ring {
+ struct xhci_segment *first_seg;
+ union xhci_trb *enqueue;
+ struct xhci_segment *enq_seg;
+ unsigned int enq_updates;
+ union xhci_trb *dequeue;
+ struct xhci_segment *deq_seg;
+ unsigned int deq_updates;
+ struct list_head td_list;
+ /* ---- Related to URB cancellation ---- */
+ struct list_head cancelled_td_list;
+ unsigned int cancels_pending;
+ unsigned int state;
+#define SET_DEQ_PENDING (1 << 0)
+ /* The TRB that was last reported in a stopped endpoint ring */
+ union xhci_trb *stopped_trb;
+ struct xhci_td *stopped_td;
+ /*
+ * Write the cycle state into the TRB cycle field to give ownership of
+ * the TRB to the host controller (if we are the producer), or to check
+ * if we own the TRB (if we are the consumer). See section 4.9.1.
+ */
+ u32 cycle_state;
+};
+
+struct xhci_erst_entry {
+ /* 64-bit event ring segment address */
+ u32 seg_addr[2];
+ u32 seg_size;
+ /* Set to zero */
+ u32 rsvd;
+};
+
+struct xhci_erst {
+ struct xhci_erst_entry *entries;
+ unsigned int num_entries;
+ /* xhci->event_ring keeps track of segment dma addresses */
+ dma_addr_t erst_dma_addr;
+ /* Num entries the ERST can contain */
+ unsigned int erst_size;
+};
+
+/*
+ * Each segment table entry is 4*32bits long. 1K seems like an ok size:
+ * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
+ * meaning 64 ring segments.
+ * Initial allocated size of the ERST, in number of entries */
+#define ERST_NUM_SEGS 1
+/* Initial allocated size of the ERST, in number of entries */
+#define ERST_SIZE 64
+/* Initial number of event segment rings allocated */
+#define ERST_ENTRIES 1
+/* Poll every 60 seconds */
+#define POLL_TIMEOUT 60
+/* XXX: Make these module parameters */
+
+
+/* There is one ehci_hci structure per controller */
+struct xhci_hcd {
+ /* glue to PCI and HCD framework */
+ struct xhci_cap_regs __iomem *cap_regs;
+ struct xhci_op_regs __iomem *op_regs;
+ struct xhci_run_regs __iomem *run_regs;
+ struct xhci_doorbell_array __iomem *dba;
+ /* Our HCD's current interrupter register set */
+ struct xhci_intr_reg __iomem *ir_set;
+
+ /* Cached register copies of read-only HC data */
+ __u32 hcs_params1;
+ __u32 hcs_params2;
+ __u32 hcs_params3;
+ __u32 hcc_params;
+
+ spinlock_t lock;
+
+ /* packed release number */
+ u8 sbrn;
+ u16 hci_version;
+ u8 max_slots;
+ u8 max_interrupters;
+ u8 max_ports;
+ u8 isoc_threshold;
+ int event_ring_max;
+ int addr_64;
+ /* 4KB min, 128MB max */
+ int page_size;
+ /* Valid values are 12 to 20, inclusive */
+ int page_shift;
+ /* only one MSI vector for now, but might need more later */
+ int msix_count;
+ struct msix_entry *msix_entries;
+ /* data structures */
+ struct xhci_device_context_array *dcbaa;
+ struct xhci_ring *cmd_ring;
+ struct xhci_ring *event_ring;
+ struct xhci_erst erst;
+ /* slot enabling and address device helpers */
+ struct completion addr_dev;
+ int slot_id;
+ /* Internal mirror of the HW's dcbaa */
+ struct xhci_virt_device *devs[MAX_HC_SLOTS];
+
+ /* DMA pools */
+ struct dma_pool *device_pool;
+ struct dma_pool *segment_pool;
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+ /* Poll the rings - for debugging */
+ struct timer_list event_ring_timer;
+ int zombie;
+#endif
+ /* Statistics */
+ int noops_submitted;
+ int noops_handled;
+ int error_bitmask;
+};
+
+/* For testing purposes */
+#define NUM_TEST_NOOPS 0
+
+/* convert between an HCD pointer and the corresponding EHCI_HCD */
+static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
+{
+ return (struct xhci_hcd *) (hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
+{
+ return container_of((void *) xhci, struct usb_hcd, hcd_priv);
+}
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+#define XHCI_DEBUG 1
+#else
+#define XHCI_DEBUG 0
+#endif
+
+#define xhci_dbg(xhci, fmt, args...) \
+ do { if (XHCI_DEBUG) dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
+#define xhci_info(xhci, fmt, args...) \
+ do { if (XHCI_DEBUG) dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
+#define xhci_err(xhci, fmt, args...) \
+ dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+#define xhci_warn(xhci, fmt, args...) \
+ dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+
+/* TODO: copied from ehci.h - can be refactored? */
+/* xHCI spec says all registers are little endian */
+static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
+ __u32 __iomem *regs)
+{
+ return readl(regs);
+}
+static inline void xhci_writel(struct xhci_hcd *xhci,
+ const unsigned int val, __u32 __iomem *regs)
+{
+ if (!in_interrupt())
+ xhci_dbg(xhci,
+ "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
+ regs, val);
+ writel(val, regs);
+}
+
+/* xHCI debugging */
+void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
+void xhci_print_registers(struct xhci_hcd *xhci);
+void xhci_dbg_regs(struct xhci_hcd *xhci);
+void xhci_print_run_regs(struct xhci_hcd *xhci);
+void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb);
+void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb);
+void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg);
+void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring);
+void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
+void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
+void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
+void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep);
+
+/* xHCI memory managment */
+void xhci_mem_cleanup(struct xhci_hcd *xhci);
+int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
+void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
+int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
+int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
+unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
+unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
+void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
+int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
+ struct usb_device *udev, struct usb_host_endpoint *ep,
+ gfp_t mem_flags);
+void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
+
+#ifdef CONFIG_PCI
+/* xHCI PCI glue */
+int xhci_register_pci(void);
+void xhci_unregister_pci(void);
+#endif
+
+/* xHCI host controller glue */
+int xhci_halt(struct xhci_hcd *xhci);
+int xhci_reset(struct xhci_hcd *xhci);
+int xhci_init(struct usb_hcd *hcd);
+int xhci_run(struct usb_hcd *hcd);
+void xhci_stop(struct usb_hcd *hcd);
+void xhci_shutdown(struct usb_hcd *hcd);
+int xhci_get_frame(struct usb_hcd *hcd);
+irqreturn_t xhci_irq(struct usb_hcd *hcd);
+int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
+void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
+int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
+int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+
+/* xHCI ring, segment, TRB, and TD functions */
+dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
+void xhci_ring_cmd_db(struct xhci_hcd *xhci);
+void *xhci_setup_one_noop(struct xhci_hcd *xhci);
+void xhci_handle_event(struct xhci_hcd *xhci);
+void xhci_set_hc_event_deq(struct xhci_hcd *xhci);
+int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
+int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+ u32 slot_id);
+int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index);
+int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+ int slot_id, unsigned int ep_index);
+int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+ int slot_id, unsigned int ep_index);
+int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+ u32 slot_id);
+
+/* xHCI roothub code */
+int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
+ char *buf, u16 wLength);
+int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+
+#endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index a4ef77e..3c5fe5c 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -726,12 +726,18 @@
.poll = iowarrior_poll,
};
+static char *iowarrior_nodename(struct device *dev)
+{
+ return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
/*
* usb class driver info in order to get a minor number from the usb core,
* and to have the device registered with devfs and the driver core
*/
static struct usb_class_driver iowarrior_class = {
.name = "iowarrior%d",
+ .nodename = iowarrior_nodename,
.fops = &iowarrior_fops,
.minor_base = IOWARRIOR_MINOR_BASE,
};
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index ab0f322..c1e2433 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -266,12 +266,18 @@
.llseek = tower_llseek,
};
+static char *legousbtower_nodename(struct device *dev)
+{
+ return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
/*
* usb class driver info in order to get a minor number from the usb core,
* and to have the device registered with the driver core
*/
static struct usb_class_driver tower_class = {
.name = "legousbtower%d",
+ .nodename = legousbtower_nodename,
.fops = &tower_fops,
.minor_base = LEGO_USB_TOWER_MINOR_BASE,
};
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
index 7603cbe..30ea7ca 100644
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -1,7 +1,7 @@
config USB_SISUSBVGA
tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
- depends on USB && USB_EHCI_HCD
+ depends on USB && (USB_MUSB_HDRC || USB_EHCI_HCD)
---help---
Say Y here if you intend to attach a USB2VGA dongle based on a
Net2280 and a SiS315 chip.
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 5f1a19d..a9f06d7 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1072,23 +1072,34 @@
*/
msleep (jiffies % (2 * INTERRUPT_RATE));
if (async) {
-retry:
- retval = usb_unlink_urb (urb);
- if (retval == -EBUSY || retval == -EIDRM) {
- /* we can't unlink urbs while they're completing.
- * or if they've completed, and we haven't resubmitted.
- * "normal" drivers would prevent resubmission, but
- * since we're testing unlink paths, we can't.
- */
- ERROR(dev, "unlink retry\n");
- goto retry;
+ while (!completion_done(&completion)) {
+ retval = usb_unlink_urb(urb);
+
+ switch (retval) {
+ case -EBUSY:
+ case -EIDRM:
+ /* we can't unlink urbs while they're completing
+ * or if they've completed, and we haven't
+ * resubmitted. "normal" drivers would prevent
+ * resubmission, but since we're testing unlink
+ * paths, we can't.
+ */
+ ERROR(dev, "unlink retry\n");
+ continue;
+ case 0:
+ case -EINPROGRESS:
+ break;
+
+ default:
+ dev_err(&dev->intf->dev,
+ "unlink fail %d\n", retval);
+ return retval;
+ }
+
+ break;
}
} else
usb_kill_urb (urb);
- if (!(retval == 0 || retval == -EINPROGRESS)) {
- dev_err(&dev->intf->dev, "unlink fail %d\n", retval);
- return retval;
- }
wait_for_completion (&completion);
retval = urb->status;
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 1f71543..a7eb4c9 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -733,7 +733,7 @@
{
struct dentry *mondir;
- mondir = debugfs_create_dir("usbmon", NULL);
+ mondir = debugfs_create_dir("usbmon", usb_debug_root);
if (IS_ERR(mondir)) {
printk(KERN_NOTICE TAG ": debugfs is not available\n");
return -ENODEV;
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index b66e854..70073b1 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -10,6 +10,7 @@
config USB_MUSB_HDRC
depends on (USB || USB_GADGET) && HAVE_CLK
depends on !SUPERH
+ select NOP_USB_XCEIV if ARCH_DAVINCI
select TWL4030_USB if MACH_OMAP_3430SDP
select USB_OTG_UTILS
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
@@ -55,6 +56,7 @@
config USB_TUSB6010
boolean "TUSB 6010 support"
depends on USB_MUSB_HDRC && !USB_MUSB_SOC
+ select NOP_USB_XCEIV
default y
help
The TUSB 6010 chip, from Texas Instruments, connects a discrete
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 7861348..f2f66eb 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -143,7 +143,7 @@
u16 val;
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_IDLE:
case OTG_STATE_A_WAIT_BCON:
/* Start a new session */
@@ -154,7 +154,7 @@
val = musb_readw(musb->mregs, MUSB_DEVCTL);
if (!(val & MUSB_DEVCTL_BDEVICE)) {
gpio_set_value(musb->config->gpio_vrsel, 1);
- musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
} else {
gpio_set_value(musb->config->gpio_vrsel, 0);
@@ -247,6 +247,11 @@
}
gpio_direction_output(musb->config->gpio_vrsel, 0);
+ usb_nop_xceiv_register();
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv)
+ return -ENODEV;
+
if (ANOMALY_05000346) {
bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
SSYNC();
@@ -291,7 +296,7 @@
musb_conn_timer_handler, (unsigned long) musb);
}
if (is_peripheral_enabled(musb))
- musb->xceiv.set_power = bfin_set_power;
+ musb->xceiv->set_power = bfin_set_power;
musb->isr = blackfin_interrupt;
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 1976e9b..c3577bb 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -6,6 +6,7 @@
* The TUSB6020, using VLYNQ, has CPPI that looks much like DaVinci.
*/
+#include <linux/platform_device.h>
#include <linux/usb.h>
#include "musb_core.h"
@@ -1145,17 +1146,27 @@
return completed;
}
-void cppi_completion(struct musb *musb, u32 rx, u32 tx)
+irqreturn_t cppi_interrupt(int irq, void *dev_id)
{
- void __iomem *tibase;
- int i, index;
+ struct musb *musb = dev_id;
struct cppi *cppi;
+ void __iomem *tibase;
struct musb_hw_ep *hw_ep = NULL;
+ u32 rx, tx;
+ int i, index;
cppi = container_of(musb->dma_controller, struct cppi, controller);
tibase = musb->ctrl_base;
+ tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
+ rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
+
+ if (!tx && !rx)
+ return IRQ_NONE;
+
+ DBG(4, "CPPI IRQ Tx%x Rx%x\n", tx, rx);
+
/* process TX channels */
for (index = 0; tx; tx = tx >> 1, index++) {
struct cppi_channel *tx_ch;
@@ -1273,6 +1284,8 @@
/* write to CPPI EOI register to re-enable interrupts */
musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0);
+
+ return IRQ_HANDLED;
}
/* Instantiate a software object representing a DMA controller. */
@@ -1280,6 +1293,9 @@
dma_controller_create(struct musb *musb, void __iomem *mregs)
{
struct cppi *controller;
+ struct device *dev = musb->controller;
+ struct platform_device *pdev = to_platform_device(dev);
+ int irq = platform_get_irq(pdev, 1);
controller = kzalloc(sizeof *controller, GFP_KERNEL);
if (!controller)
@@ -1310,6 +1326,15 @@
return NULL;
}
+ if (irq > 0) {
+ if (request_irq(irq, cppi_interrupt, 0, "cppi-dma", musb)) {
+ dev_err(dev, "request_irq %d failed!\n", irq);
+ dma_controller_destroy(&controller->controller);
+ return NULL;
+ }
+ controller->irq = irq;
+ }
+
return &controller->controller;
}
@@ -1322,6 +1347,9 @@
cppi = container_of(c, struct cppi, controller);
+ if (cppi->irq)
+ free_irq(cppi->irq, cppi->musb);
+
/* assert: caller stopped the controller first */
dma_pool_destroy(cppi->pool);
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
index 729b407..8a39de3 100644
--- a/drivers/usb/musb/cppi_dma.h
+++ b/drivers/usb/musb/cppi_dma.h
@@ -119,6 +119,8 @@
void __iomem *mregs; /* Mentor regs */
void __iomem *tibase; /* TI/CPPI regs */
+ int irq;
+
struct cppi_channel tx[4];
struct cppi_channel rx[4];
@@ -127,7 +129,7 @@
struct list_head tx_complete;
};
-/* irq handling hook */
-extern void cppi_completion(struct musb *, u32 rx, u32 tx);
+/* CPPI IRQ handler */
+extern irqreturn_t cppi_interrupt(int, void *);
#endif /* end of ifndef _CPPI_DMA_H_ */
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 10d11ab..180d7da 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -215,7 +215,7 @@
DBG(7, "poll devctl %02x (%s)\n", devctl, otg_state_string(musb));
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_VFALL:
/* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL
* seems to mis-handle session "start" otherwise (or in our
@@ -226,7 +226,7 @@
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
break;
}
- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT);
break;
@@ -251,7 +251,7 @@
if (devctl & MUSB_DEVCTL_BDEVICE)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
else
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
break;
default:
break;
@@ -265,6 +265,7 @@
irqreturn_t retval = IRQ_NONE;
struct musb *musb = __hci;
void __iomem *tibase = musb->ctrl_base;
+ struct cppi *cppi;
u32 tmp;
spin_lock_irqsave(&musb->lock, flags);
@@ -281,16 +282,9 @@
/* CPPI interrupts share the same IRQ line, but have their own
* mask, state, "vector", and EOI registers.
*/
- if (is_cppi_enabled()) {
- u32 cppi_tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
- u32 cppi_rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
-
- if (cppi_tx || cppi_rx) {
- DBG(4, "CPPI IRQ t%x r%x\n", cppi_tx, cppi_rx);
- cppi_completion(musb, cppi_rx, cppi_tx);
- retval = IRQ_HANDLED;
- }
- }
+ cppi = container_of(musb->dma_controller, struct cppi, controller);
+ if (is_cppi_enabled() && musb->dma_controller && !cppi->irq)
+ retval = cppi_interrupt(irq, __hci);
/* ack and handle non-CPPI interrupts */
tmp = musb_readl(tibase, DAVINCI_USB_INT_SRC_MASKED_REG);
@@ -331,21 +325,21 @@
* to stop registering in devctl.
*/
musb->int_usb &= ~MUSB_INTR_VBUSERROR;
- musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
WARNING("VBUS error workaround (delay coming)\n");
} else if (is_host_enabled(musb) && drvvbus) {
musb->is_active = 1;
MUSB_HST_MODE(musb);
- musb->xceiv.default_a = 1;
- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&otg_workaround);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
- musb->xceiv.default_a = 0;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
@@ -367,17 +361,12 @@
/* poll for ID change */
if (is_otg_enabled(musb)
- && musb->xceiv.state == OTG_STATE_B_IDLE)
+ && musb->xceiv->state == OTG_STATE_B_IDLE)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
spin_unlock_irqrestore(&musb->lock, flags);
- /* REVISIT we sometimes get unhandled IRQs
- * (e.g. ep0). not clear why...
- */
- if (retval != IRQ_HANDLED)
- DBG(5, "unhandled? %08x\n", tmp);
- return IRQ_HANDLED;
+ return retval;
}
int musb_platform_set_mode(struct musb *musb, u8 mode)
@@ -391,6 +380,11 @@
void __iomem *tibase = musb->ctrl_base;
u32 revision;
+ usb_nop_xceiv_register();
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv)
+ return -ENODEV;
+
musb->mregs += DAVINCI_BASE_OFFSET;
clk_enable(musb->clock);
@@ -398,7 +392,7 @@
/* returns zero if e.g. not clocked */
revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
if (revision == 0)
- return -ENODEV;
+ goto fail;
if (is_host_enabled(musb))
setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
@@ -432,6 +426,10 @@
musb->isr = davinci_interrupt;
return 0;
+
+fail:
+ usb_nop_xceiv_unregister();
+ return -ENODEV;
}
int musb_platform_exit(struct musb *musb)
@@ -442,7 +440,7 @@
davinci_source_power(musb, 0 /*off*/, 1);
/* delay, to avoid problems with module reload */
- if (is_host_enabled(musb) && musb->xceiv.default_a) {
+ if (is_host_enabled(musb) && musb->xceiv->default_a) {
int maxdelay = 30;
u8 devctl, warn = 0;
@@ -471,5 +469,7 @@
clk_disable(musb->clock);
+ usb_nop_xceiv_unregister();
+
return 0;
}
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 4000cf6..554a414 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -112,6 +112,7 @@
#include "davinci.h"
#endif
+#define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
unsigned musb_debug;
@@ -267,7 +268,7 @@
const char *otg_state_string(struct musb *musb)
{
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_IDLE: return "a_idle";
case OTG_STATE_A_WAIT_VRISE: return "a_wait_vrise";
case OTG_STATE_A_WAIT_BCON: return "a_wait_bcon";
@@ -288,12 +289,6 @@
#ifdef CONFIG_USB_MUSB_OTG
/*
- * See also USB_OTG_1-3.pdf 6.6.5 Timers
- * REVISIT: Are the other timers done in the hardware?
- */
-#define TB_ASE0_BRST 100 /* Min 3.125 ms */
-
-/*
* Handles OTG hnp timeouts, such as b_ase0_brst
*/
void musb_otg_timer_func(unsigned long data)
@@ -302,16 +297,18 @@
unsigned long flags;
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_WAIT_ACON:
DBG(1, "HNP: b_wait_acon timeout; back to b_peripheral\n");
musb_g_disconnect(musb);
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
musb->is_active = 0;
break;
+ case OTG_STATE_A_SUSPEND:
case OTG_STATE_A_WAIT_BCON:
- DBG(1, "HNP: a_wait_bcon timeout; back to a_host\n");
- musb_hnp_stop(musb);
+ DBG(1, "HNP: %s timeout\n", otg_state_string(musb));
+ musb_set_vbus(musb, 0);
+ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
break;
default:
DBG(1, "HNP: Unhandled mode %s\n", otg_state_string(musb));
@@ -320,10 +317,8 @@
spin_unlock_irqrestore(&musb->lock, flags);
}
-static DEFINE_TIMER(musb_otg_timer, musb_otg_timer_func, 0, 0);
-
/*
- * Stops the B-device HNP state. Caller must take care of locking.
+ * Stops the HNP transition. Caller must take care of locking.
*/
void musb_hnp_stop(struct musb *musb)
{
@@ -331,20 +326,17 @@
void __iomem *mbase = musb->mregs;
u8 reg;
- switch (musb->xceiv.state) {
+ DBG(1, "HNP: stop from %s\n", otg_state_string(musb));
+
+ switch (musb->xceiv->state) {
case OTG_STATE_A_PERIPHERAL:
- case OTG_STATE_A_WAIT_VFALL:
- case OTG_STATE_A_WAIT_BCON:
- DBG(1, "HNP: Switching back to A-host\n");
musb_g_disconnect(musb);
- musb->xceiv.state = OTG_STATE_A_IDLE;
- MUSB_HST_MODE(musb);
- musb->is_active = 0;
+ DBG(1, "HNP: back to %s\n", otg_state_string(musb));
break;
case OTG_STATE_B_HOST:
DBG(1, "HNP: Disabling HR\n");
hcd->self.is_b_host = 0;
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
MUSB_DEV_MODE(musb);
reg = musb_readb(mbase, MUSB_POWER);
reg |= MUSB_POWER_SUSPENDM;
@@ -402,7 +394,7 @@
if (devctl & MUSB_DEVCTL_HM) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_SUSPEND:
/* remote wakeup? later, GetPortStatus
* will stop RESUME signaling
@@ -425,12 +417,12 @@
musb->rh_timer = jiffies
+ msecs_to_jiffies(20);
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
musb->is_active = 1;
usb_hcd_resume_root_hub(musb_to_hcd(musb));
break;
case OTG_STATE_B_WAIT_ACON:
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
musb->is_active = 1;
MUSB_DEV_MODE(musb);
break;
@@ -441,11 +433,11 @@
}
#endif
} else {
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
case OTG_STATE_A_SUSPEND:
/* possibly DISCONNECT is upcoming */
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
usb_hcd_resume_root_hub(musb_to_hcd(musb));
break;
#endif
@@ -490,7 +482,7 @@
*/
musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
musb->ep0_stage = MUSB_EP0_START;
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
musb_set_vbus(musb, 1);
@@ -516,7 +508,7 @@
* REVISIT: do delays from lots of DEBUG_KERNEL checks
* make trouble here, keeping VBUS < 4.4V ?
*/
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_HOST:
/* recovery is dicey once we've gotten past the
* initial stages of enumeration, but if VBUS
@@ -594,37 +586,40 @@
if (devctl & MUSB_DEVCTL_LSDEV)
musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
+ /* indicate new connection to OTG machine */
+ switch (musb->xceiv->state) {
+ case OTG_STATE_B_PERIPHERAL:
+ if (int_usb & MUSB_INTR_SUSPEND) {
+ DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n");
+ int_usb &= ~MUSB_INTR_SUSPEND;
+ goto b_host;
+ } else
+ DBG(1, "CONNECT as b_peripheral???\n");
+ break;
+ case OTG_STATE_B_WAIT_ACON:
+ DBG(1, "HNP: CONNECT, now b_host\n");
+b_host:
+ musb->xceiv->state = OTG_STATE_B_HOST;
+ hcd->self.is_b_host = 1;
+ musb->ignore_disconnect = 0;
+ del_timer(&musb->otg_timer);
+ break;
+ default:
+ if ((devctl & MUSB_DEVCTL_VBUS)
+ == (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
+ musb->xceiv->state = OTG_STATE_A_HOST;
+ hcd->self.is_b_host = 0;
+ }
+ break;
+ }
+
+ /* poke the root hub */
+ MUSB_HST_MODE(musb);
if (hcd->status_urb)
usb_hcd_poll_rh_status(hcd);
else
usb_hcd_resume_root_hub(hcd);
- MUSB_HST_MODE(musb);
-
- /* indicate new connection to OTG machine */
- switch (musb->xceiv.state) {
- case OTG_STATE_B_PERIPHERAL:
- if (int_usb & MUSB_INTR_SUSPEND) {
- DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n");
- musb->xceiv.state = OTG_STATE_B_HOST;
- hcd->self.is_b_host = 1;
- int_usb &= ~MUSB_INTR_SUSPEND;
- } else
- DBG(1, "CONNECT as b_peripheral???\n");
- break;
- case OTG_STATE_B_WAIT_ACON:
- DBG(1, "HNP: Waiting to switch to b_host state\n");
- musb->xceiv.state = OTG_STATE_B_HOST;
- hcd->self.is_b_host = 1;
- break;
- default:
- if ((devctl & MUSB_DEVCTL_VBUS)
- == (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
- musb->xceiv.state = OTG_STATE_A_HOST;
- hcd->self.is_b_host = 0;
- }
- break;
- }
DBG(1, "CONNECT (%s) devctl %02x\n",
otg_state_string(musb), devctl);
}
@@ -650,7 +645,7 @@
}
} else if (is_peripheral_capable()) {
DBG(1, "BUS RESET as %s\n", otg_state_string(musb));
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
#ifdef CONFIG_USB_OTG
case OTG_STATE_A_SUSPEND:
/* We need to ignore disconnect on suspend
@@ -661,24 +656,27 @@
musb_g_reset(musb);
/* FALLTHROUGH */
case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */
- DBG(1, "HNP: Setting timer as %s\n",
- otg_state_string(musb));
- musb_otg_timer.data = (unsigned long)musb;
- mod_timer(&musb_otg_timer, jiffies
- + msecs_to_jiffies(100));
+ /* never use invalid T(a_wait_bcon) */
+ DBG(1, "HNP: in %s, %d msec timeout\n",
+ otg_state_string(musb),
+ TA_WAIT_BCON(musb));
+ mod_timer(&musb->otg_timer, jiffies
+ + msecs_to_jiffies(TA_WAIT_BCON(musb)));
break;
case OTG_STATE_A_PERIPHERAL:
- musb_hnp_stop(musb);
+ musb->ignore_disconnect = 0;
+ del_timer(&musb->otg_timer);
+ musb_g_reset(musb);
break;
case OTG_STATE_B_WAIT_ACON:
DBG(1, "HNP: RESET (%s), to b_peripheral\n",
otg_state_string(musb));
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
musb_g_reset(musb);
break;
#endif
case OTG_STATE_B_IDLE:
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
/* FALLTHROUGH */
case OTG_STATE_B_PERIPHERAL:
musb_g_reset(musb);
@@ -763,7 +761,7 @@
MUSB_MODE(musb), devctl);
handled = IRQ_HANDLED;
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
case OTG_STATE_A_HOST:
case OTG_STATE_A_SUSPEND:
@@ -776,7 +774,16 @@
#endif /* HOST */
#ifdef CONFIG_USB_MUSB_OTG
case OTG_STATE_B_HOST:
- musb_hnp_stop(musb);
+ /* REVISIT this behaves for "real disconnect"
+ * cases; make sure the other transitions from
+ * from B_HOST act right too. The B_HOST code
+ * in hnp_stop() is currently not used...
+ */
+ musb_root_disconnect(musb);
+ musb_to_hcd(musb)->self.is_b_host = 0;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ MUSB_DEV_MODE(musb);
+ musb_g_disconnect(musb);
break;
case OTG_STATE_A_PERIPHERAL:
musb_hnp_stop(musb);
@@ -805,26 +812,35 @@
otg_state_string(musb), devctl, power);
handled = IRQ_HANDLED;
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
#ifdef CONFIG_USB_MUSB_OTG
case OTG_STATE_A_PERIPHERAL:
- /*
- * We cannot stop HNP here, devctl BDEVICE might be
- * still set.
+ /* We also come here if the cable is removed, since
+ * this silicon doesn't report ID-no-longer-grounded.
+ *
+ * We depend on T(a_wait_bcon) to shut us down, and
+ * hope users don't do anything dicey during this
+ * undesired detour through A_WAIT_BCON.
*/
+ musb_hnp_stop(musb);
+ usb_hcd_resume_root_hub(musb_to_hcd(musb));
+ musb_root_disconnect(musb);
+ musb_platform_try_idle(musb, jiffies
+ + msecs_to_jiffies(musb->a_wait_bcon
+ ? : OTG_TIME_A_WAIT_BCON));
break;
#endif
case OTG_STATE_B_PERIPHERAL:
musb_g_suspend(musb);
musb->is_active = is_otg_enabled(musb)
- && musb->xceiv.gadget->b_hnp_enable;
+ && musb->xceiv->gadget->b_hnp_enable;
if (musb->is_active) {
#ifdef CONFIG_USB_MUSB_OTG
- musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+ musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
DBG(1, "HNP: Setting timer for b_ase0_brst\n");
- musb_otg_timer.data = (unsigned long)musb;
- mod_timer(&musb_otg_timer, jiffies
- + msecs_to_jiffies(TB_ASE0_BRST));
+ mod_timer(&musb->otg_timer, jiffies
+ + msecs_to_jiffies(
+ OTG_TIME_B_ASE0_BRST));
#endif
}
break;
@@ -834,9 +850,9 @@
+ msecs_to_jiffies(musb->a_wait_bcon));
break;
case OTG_STATE_A_HOST:
- musb->xceiv.state = OTG_STATE_A_SUSPEND;
+ musb->xceiv->state = OTG_STATE_A_SUSPEND;
musb->is_active = is_otg_enabled(musb)
- && musb->xceiv.host->b_hnp_enable;
+ && musb->xceiv->host->b_hnp_enable;
break;
case OTG_STATE_B_HOST:
/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
@@ -1068,14 +1084,13 @@
{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 13, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 13, .style = FIFO_RX, .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 256, },
+{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 64, },
+{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 256, },
+{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 64, },
+{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 256, },
+{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 64, },
+{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, },
{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
};
@@ -1335,11 +1350,11 @@
}
if (reg & MUSB_CONFIGDATA_HBRXE) {
strcat(aInfo, ", HB-ISO Rx");
- strcat(aInfo, " (X)"); /* no driver support */
+ musb->hb_iso_rx = true;
}
if (reg & MUSB_CONFIGDATA_HBTXE) {
strcat(aInfo, ", HB-ISO Tx");
- strcat(aInfo, " (X)"); /* no driver support */
+ musb->hb_iso_tx = true;
}
if (reg & MUSB_CONFIGDATA_SOFTCONE)
strcat(aInfo, ", SoftConn");
@@ -1481,13 +1496,7 @@
spin_unlock_irqrestore(&musb->lock, flags);
- /* REVISIT we sometimes get spurious IRQs on g_ep0
- * not clear why...
- */
- if (retval != IRQ_HANDLED)
- DBG(5, "spurious?\n");
-
- return IRQ_HANDLED;
+ return retval;
}
#else
@@ -1687,8 +1696,9 @@
}
spin_lock_irqsave(&musb->lock, flags);
- musb->a_wait_bcon = val;
- if (musb->xceiv.state == OTG_STATE_A_WAIT_BCON)
+ /* force T(a_wait_bcon) to be zero/unlimited *OR* valid */
+ musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ;
+ if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON)
musb->is_active = 0;
musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
spin_unlock_irqrestore(&musb->lock, flags);
@@ -1706,10 +1716,13 @@
spin_lock_irqsave(&musb->lock, flags);
val = musb->a_wait_bcon;
+ /* FIXME get_vbus_status() is normally #defined as false...
+ * and is effectively TUSB-specific.
+ */
vbus = musb_platform_get_vbus_status(musb);
spin_unlock_irqrestore(&musb->lock, flags);
- return sprintf(buf, "Vbus %s, timeout %lu\n",
+ return sprintf(buf, "Vbus %s, timeout %lu msec\n",
vbus ? "on" : "off", val);
}
static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
@@ -1749,8 +1762,8 @@
struct musb *musb = container_of(data, struct musb, irq_work);
static int old_state;
- if (musb->xceiv.state != old_state) {
- old_state = musb->xceiv.state;
+ if (musb->xceiv->state != old_state) {
+ old_state = musb->xceiv->state;
sysfs_notify(&musb->controller->kobj, NULL, "mode");
}
}
@@ -1782,6 +1795,7 @@
hcd->uses_new_polling = 1;
musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+ musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
#else
musb = kzalloc(sizeof *musb, GFP_KERNEL);
if (!musb)
@@ -1847,7 +1861,7 @@
}
#ifdef CONFIG_USB_MUSB_OTG
- put_device(musb->xceiv.dev);
+ put_device(musb->xceiv->dev);
#endif
#ifdef CONFIG_USB_MUSB_HDRC_HCD
@@ -1928,10 +1942,18 @@
}
}
- /* assume vbus is off */
-
- /* platform adjusts musb->mregs and musb->isr if needed,
- * and activates clocks
+ /* The musb_platform_init() call:
+ * - adjusts musb->mregs and musb->isr if needed,
+ * - may initialize an integrated tranceiver
+ * - initializes musb->xceiv, usually by otg_get_transceiver()
+ * - activates clocks.
+ * - stops powering VBUS
+ * - assigns musb->board_set_vbus if host mode is enabled
+ *
+ * There are various transciever configurations. Blackfin,
+ * DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
+ * external/discrete ones in various flavors (twl4030 family,
+ * isp1504, non-OTG, etc) mostly hooking up through ULPI.
*/
musb->isr = generic_interrupt;
status = musb_platform_init(musb);
@@ -1968,6 +1990,10 @@
if (status < 0)
goto fail2;
+#ifdef CONFIG_USB_OTG
+ setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
+#endif
+
/* Init IRQ workqueue before request_irq */
INIT_WORK(&musb->irq_work, musb_irq_work);
@@ -1999,17 +2025,17 @@
? "DMA" : "PIO",
musb->nIrq);
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- /* host side needs more setup, except for no-host modes */
- if (musb->board_mode != MUSB_PERIPHERAL) {
+ /* host side needs more setup */
+ if (is_host_enabled(musb)) {
struct usb_hcd *hcd = musb_to_hcd(musb);
- if (musb->board_mode == MUSB_OTG)
+ otg_set_host(musb->xceiv, &hcd->self);
+
+ if (is_otg_enabled(musb))
hcd->self.otg_port = 1;
- musb->xceiv.host = &hcd->self;
+ musb->xceiv->host = &hcd->self;
hcd->power_budget = 2 * (plat->power ? : 250);
}
-#endif /* CONFIG_USB_MUSB_HDRC_HCD */
/* For the host-only role, we can activate right away.
* (We expect the ID pin to be forcibly grounded!!)
@@ -2017,8 +2043,8 @@
*/
if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
MUSB_HST_MODE(musb);
- musb->xceiv.default_a = 1;
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
if (status)
@@ -2033,8 +2059,8 @@
} else /* peripheral is enabled */ {
MUSB_DEV_MODE(musb);
- musb->xceiv.default_a = 0;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
status = musb_gadget_setup(musb);
if (status)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index efb39b5..f3772ca 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -40,6 +40,7 @@
#include <linux/interrupt.h>
#include <linux/smp_lock.h>
#include <linux/errno.h>
+#include <linux/timer.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/usb/ch9.h>
@@ -171,7 +172,8 @@
/* peripheral side ep0 states */
enum musb_g_ep0_state {
- MUSB_EP0_STAGE_SETUP, /* idle, waiting for setup */
+ MUSB_EP0_STAGE_IDLE, /* idle, waiting for SETUP */
+ MUSB_EP0_STAGE_SETUP, /* received SETUP */
MUSB_EP0_STAGE_TX, /* IN data */
MUSB_EP0_STAGE_RX, /* OUT data */
MUSB_EP0_STAGE_STATUSIN, /* (after OUT data) */
@@ -179,10 +181,15 @@
MUSB_EP0_STAGE_ACKWAIT, /* after zlp, before statusin */
} __attribute__ ((packed));
-/* OTG protocol constants */
+/*
+ * OTG protocol constants. See USB OTG 1.3 spec,
+ * sections 5.5 "Device Timings" and 6.6.5 "Timers".
+ */
#define OTG_TIME_A_WAIT_VRISE 100 /* msec (max) */
-#define OTG_TIME_A_WAIT_BCON 0 /* 0=infinite; min 1000 msec */
-#define OTG_TIME_A_IDLE_BDIS 200 /* msec (min) */
+#define OTG_TIME_A_WAIT_BCON 1100 /* min 1 second */
+#define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */
+#define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */
+
/*************************** REGISTER ACCESS ********************************/
@@ -331,6 +338,8 @@
struct list_head control; /* of musb_qh */
struct list_head in_bulk; /* of musb_qh */
struct list_head out_bulk; /* of musb_qh */
+
+ struct timer_list otg_timer;
#endif
/* called with IRQs blocked; ON/nonzero implies starting a session,
@@ -355,7 +364,7 @@
u16 int_rx;
u16 int_tx;
- struct otg_transceiver xceiv;
+ struct otg_transceiver *xceiv;
int nIrq;
unsigned irq_wake:1;
@@ -386,6 +395,9 @@
unsigned is_multipoint:1;
unsigned ignore_disconnect:1; /* during bus resets */
+ unsigned hb_iso_rx:1; /* high bandwidth iso rx? */
+ unsigned hb_iso_tx:1; /* high bandwidth iso tx? */
+
#ifdef C_MP_TX
unsigned bulk_split:1;
#define can_bulk_split(musb,type) \
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f79440c..8b3c4e2 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -310,7 +310,7 @@
/* setup DMA, then program endpoint CSR */
request_size = min(request->length,
musb_ep->dma->max_len);
- if (request_size <= musb_ep->packet_sz)
+ if (request_size < musb_ep->packet_sz)
musb_ep->dma->desired_mode = 0;
else
musb_ep->dma->desired_mode = 1;
@@ -349,7 +349,8 @@
#elif defined(CONFIG_USB_TI_CPPI_DMA)
/* program endpoint CSR first, then setup DMA */
csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
- csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
+ csr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE |
+ MUSB_TXCSR_MODE;
musb_writew(epio, MUSB_TXCSR,
(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
| csr);
@@ -1405,7 +1406,7 @@
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_PERIPHERAL:
/* NOTE: OTG state machine doesn't include B_SUSPENDED;
* that's part of the standard usb 1.1 state machine, and
@@ -1507,9 +1508,9 @@
{
struct musb *musb = gadget_to_musb(gadget);
- if (!musb->xceiv.set_power)
+ if (!musb->xceiv->set_power)
return -EOPNOTSUPP;
- return otg_set_power(&musb->xceiv, mA);
+ return otg_set_power(musb->xceiv, mA);
}
static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
@@ -1732,11 +1733,7 @@
spin_lock_irqsave(&musb->lock, flags);
- /* REVISIT always use otg_set_peripheral(), handling
- * issues including the root hub one below ...
- */
- musb->xceiv.gadget = &musb->g;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ otg_set_peripheral(musb->xceiv, &musb->g);
musb->is_active = 1;
/* FIXME this ignores the softconnect flag. Drivers are
@@ -1748,6 +1745,8 @@
if (!is_otg_enabled(musb))
musb_start(musb);
+ otg_set_peripheral(musb->xceiv, &musb->g);
+
spin_unlock_irqrestore(&musb->lock, flags);
if (is_otg_enabled(musb)) {
@@ -1761,8 +1760,7 @@
if (retval < 0) {
DBG(1, "add_hcd failed, %d\n", retval);
spin_lock_irqsave(&musb->lock, flags);
- musb->xceiv.gadget = NULL;
- musb->xceiv.state = OTG_STATE_UNDEFINED;
+ otg_set_peripheral(musb->xceiv, NULL);
musb->gadget_driver = NULL;
musb->g.dev.driver = NULL;
spin_unlock_irqrestore(&musb->lock, flags);
@@ -1845,8 +1843,9 @@
(void) musb_gadget_vbus_draw(&musb->g, 0);
- musb->xceiv.state = OTG_STATE_UNDEFINED;
+ musb->xceiv->state = OTG_STATE_UNDEFINED;
stop_activity(musb, driver);
+ otg_set_peripheral(musb->xceiv, NULL);
DBG(3, "unregistering driver %s\n", driver->function);
spin_unlock_irqrestore(&musb->lock, flags);
@@ -1882,7 +1881,7 @@
void musb_g_resume(struct musb *musb)
{
musb->is_suspended = 0;
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_IDLE:
break;
case OTG_STATE_B_WAIT_ACON:
@@ -1908,10 +1907,10 @@
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
DBG(3, "devctl %02x\n", devctl);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_IDLE:
if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
break;
case OTG_STATE_B_PERIPHERAL:
musb->is_suspended = 1;
@@ -1957,22 +1956,24 @@
spin_lock(&musb->lock);
}
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
default:
#ifdef CONFIG_USB_MUSB_OTG
DBG(2, "Unhandled disconnect %s, setting a_idle\n",
otg_state_string(musb));
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
+ MUSB_HST_MODE(musb);
break;
case OTG_STATE_A_PERIPHERAL:
- musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ MUSB_HST_MODE(musb);
break;
case OTG_STATE_B_WAIT_ACON:
case OTG_STATE_B_HOST:
#endif
case OTG_STATE_B_PERIPHERAL:
case OTG_STATE_B_IDLE:
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
break;
case OTG_STATE_B_SRP_INIT:
break;
@@ -2028,10 +2029,10 @@
* or else after HNP, as A-Device
*/
if (devctl & MUSB_DEVCTL_BDEVICE) {
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
musb->g.is_a_peripheral = 0;
} else if (is_otg_enabled(musb)) {
- musb->xceiv.state = OTG_STATE_A_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
musb->g.is_a_peripheral = 1;
} else
WARN_ON(1);
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 3f5e30d..40ed50e 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -4,6 +4,7 @@
* Copyright 2005 Mentor Graphics Corporation
* Copyright (C) 2005-2006 by Texas Instruments
* Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -58,7 +59,8 @@
static char *decode_ep0stage(u8 stage)
{
switch (stage) {
- case MUSB_EP0_STAGE_SETUP: return "idle";
+ case MUSB_EP0_STAGE_IDLE: return "idle";
+ case MUSB_EP0_STAGE_SETUP: return "setup";
case MUSB_EP0_STAGE_TX: return "in";
case MUSB_EP0_STAGE_RX: return "out";
case MUSB_EP0_STAGE_ACKWAIT: return "wait";
@@ -628,7 +630,7 @@
musb_writew(regs, MUSB_CSR0,
csr & ~MUSB_CSR0_P_SENTSTALL);
retval = IRQ_HANDLED;
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
csr = musb_readw(regs, MUSB_CSR0);
}
@@ -636,7 +638,18 @@
if (csr & MUSB_CSR0_P_SETUPEND) {
musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
retval = IRQ_HANDLED;
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ /* Transition into the early status phase */
+ switch (musb->ep0_state) {
+ case MUSB_EP0_STAGE_TX:
+ musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
+ break;
+ case MUSB_EP0_STAGE_RX:
+ musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+ break;
+ default:
+ ERR("SetupEnd came in a wrong ep0stage %s",
+ decode_ep0stage(musb->ep0_state));
+ }
csr = musb_readw(regs, MUSB_CSR0);
/* NOTE: request may need completion */
}
@@ -697,11 +710,31 @@
if (req)
musb_g_ep0_giveback(musb, req);
}
+
+ /*
+ * In case when several interrupts can get coalesced,
+ * check to see if we've already received a SETUP packet...
+ */
+ if (csr & MUSB_CSR0_RXPKTRDY)
+ goto setup;
+
+ retval = IRQ_HANDLED;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+ break;
+
+ case MUSB_EP0_STAGE_IDLE:
+ /*
+ * This state is typically (but not always) indiscernible
+ * from the status states since the corresponding interrupts
+ * tend to happen within too little period of time (with only
+ * a zero-length packet in between) and so get coalesced...
+ */
retval = IRQ_HANDLED;
musb->ep0_state = MUSB_EP0_STAGE_SETUP;
/* FALLTHROUGH */
case MUSB_EP0_STAGE_SETUP:
+setup:
if (csr & MUSB_CSR0_RXPKTRDY) {
struct usb_ctrlrequest setup;
int handled = 0;
@@ -783,7 +816,7 @@
stall:
DBG(3, "stall (%d)\n", handled);
musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
finish:
musb_writew(regs, MUSB_CSR0,
musb->ackpend);
@@ -803,7 +836,7 @@
/* "can't happen" */
WARN_ON(1);
musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
break;
}
@@ -959,7 +992,7 @@
csr |= MUSB_CSR0_P_SENDSTALL;
musb_writew(regs, MUSB_CSR0, csr);
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
musb->ackpend = 0;
break;
default:
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index db1b574..94a2a35 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -181,6 +181,19 @@
musb_writew(ep->regs, MUSB_TXCSR, txcsr);
}
+static void musb_ep_set_qh(struct musb_hw_ep *ep, int is_in, struct musb_qh *qh)
+{
+ if (is_in != 0 || ep->is_shared_fifo)
+ ep->in_qh = qh;
+ if (is_in == 0 || ep->is_shared_fifo)
+ ep->out_qh = qh;
+}
+
+static struct musb_qh *musb_ep_get_qh(struct musb_hw_ep *ep, int is_in)
+{
+ return is_in ? ep->in_qh : ep->out_qh;
+}
+
/*
* Start the URB at the front of an endpoint's queue
* end must be claimed from the caller.
@@ -210,7 +223,6 @@
case USB_ENDPOINT_XFER_CONTROL:
/* control transfers always start with SETUP */
is_in = 0;
- hw_ep->out_qh = qh;
musb->ep0_stage = MUSB_EP0_START;
buf = urb->setup_packet;
len = 8;
@@ -239,10 +251,7 @@
epnum, buf + offset, len);
/* Configure endpoint */
- if (is_in || hw_ep->is_shared_fifo)
- hw_ep->in_qh = qh;
- else
- hw_ep->out_qh = qh;
+ musb_ep_set_qh(hw_ep, is_in, qh);
musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
/* transmit may have more work: start it when it is time */
@@ -286,9 +295,8 @@
}
}
-/* caller owns controller lock, irqs are blocked */
-static void
-__musb_giveback(struct musb *musb, struct urb *urb, int status)
+/* Context: caller owns controller lock, IRQs are blocked */
+static void musb_giveback(struct musb *musb, struct urb *urb, int status)
__releases(musb->lock)
__acquires(musb->lock)
{
@@ -321,60 +329,57 @@
spin_lock(&musb->lock);
}
-/* for bulk/interrupt endpoints only */
-static inline void
-musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
+/* For bulk/interrupt endpoints only */
+static inline void musb_save_toggle(struct musb_qh *qh, int is_in,
+ struct urb *urb)
{
- struct usb_device *udev = urb->dev;
+ void __iomem *epio = qh->hw_ep->regs;
u16 csr;
- void __iomem *epio = ep->regs;
- struct musb_qh *qh;
- /* FIXME: the current Mentor DMA code seems to have
+ /*
+ * FIXME: the current Mentor DMA code seems to have
* problems getting toggle correct.
*/
- if (is_in || ep->is_shared_fifo)
- qh = ep->in_qh;
+ if (is_in)
+ csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE;
else
- qh = ep->out_qh;
+ csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE;
- if (!is_in) {
- csr = musb_readw(epio, MUSB_TXCSR);
- usb_settoggle(udev, qh->epnum, 1,
- (csr & MUSB_TXCSR_H_DATATOGGLE)
- ? 1 : 0);
- } else {
- csr = musb_readw(epio, MUSB_RXCSR);
- usb_settoggle(udev, qh->epnum, 0,
- (csr & MUSB_RXCSR_H_DATATOGGLE)
- ? 1 : 0);
- }
+ usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0);
}
-/* caller owns controller lock, irqs are blocked */
-static struct musb_qh *
-musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
+/*
+ * Advance this hardware endpoint's queue, completing the specified URB and
+ * advancing to either the next URB queued to that qh, or else invalidating
+ * that qh and advancing to the next qh scheduled after the current one.
+ *
+ * Context: caller owns controller lock, IRQs are blocked
+ */
+static void musb_advance_schedule(struct musb *musb, struct urb *urb,
+ struct musb_hw_ep *hw_ep, int is_in)
{
+ struct musb_qh *qh = musb_ep_get_qh(hw_ep, is_in);
struct musb_hw_ep *ep = qh->hw_ep;
- struct musb *musb = ep->musb;
- int is_in = usb_pipein(urb->pipe);
int ready = qh->is_ready;
+ int status;
+
+ status = (urb->status == -EINPROGRESS) ? 0 : urb->status;
/* save toggle eagerly, for paranoia */
switch (qh->type) {
case USB_ENDPOINT_XFER_BULK:
case USB_ENDPOINT_XFER_INT:
- musb_save_toggle(ep, is_in, urb);
+ musb_save_toggle(qh, is_in, urb);
break;
case USB_ENDPOINT_XFER_ISOC:
- if (status == 0 && urb->error_count)
+ if (urb->error_count)
status = -EXDEV;
break;
}
qh->is_ready = 0;
- __musb_giveback(musb, urb, status);
+ musb_giveback(musb, urb, status);
qh->is_ready = ready;
/* reclaim resources (and bandwidth) ASAP; deschedule it, and
@@ -388,11 +393,8 @@
else
ep->tx_reinit = 1;
- /* clobber old pointers to this qh */
- if (is_in || ep->is_shared_fifo)
- ep->in_qh = NULL;
- else
- ep->out_qh = NULL;
+ /* Clobber old pointers to this qh */
+ musb_ep_set_qh(ep, is_in, NULL);
qh->hep->hcpriv = NULL;
switch (qh->type) {
@@ -421,36 +423,10 @@
break;
}
}
- return qh;
-}
-
-/*
- * Advance this hardware endpoint's queue, completing the specified urb and
- * advancing to either the next urb queued to that qh, or else invalidating
- * that qh and advancing to the next qh scheduled after the current one.
- *
- * Context: caller owns controller lock, irqs are blocked
- */
-static void
-musb_advance_schedule(struct musb *musb, struct urb *urb,
- struct musb_hw_ep *hw_ep, int is_in)
-{
- struct musb_qh *qh;
-
- if (is_in || hw_ep->is_shared_fifo)
- qh = hw_ep->in_qh;
- else
- qh = hw_ep->out_qh;
-
- if (urb->status == -EINPROGRESS)
- qh = musb_giveback(qh, urb, 0);
- else
- qh = musb_giveback(qh, urb, urb->status);
if (qh != NULL && qh->is_ready) {
DBG(4, "... next ep%d %cX urb %p\n",
- hw_ep->epnum, is_in ? 'R' : 'T',
- next_urb(qh));
+ hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh));
musb_start_urb(musb, is_in, qh);
}
}
@@ -629,7 +605,8 @@
musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
/* NOTE: bulk combining rewrites high bits of maxpacket */
- musb_writew(ep->regs, MUSB_RXMAXP, qh->maxpacket);
+ musb_writew(ep->regs, MUSB_RXMAXP,
+ qh->maxpacket | ((qh->hb_mult - 1) << 11));
ep->rx_reinit = 0;
}
@@ -651,9 +628,10 @@
csr = musb_readw(epio, MUSB_TXCSR);
if (length > pkt_size) {
mode = 1;
- csr |= MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_DMAENAB;
+ csr |= MUSB_TXCSR_DMAMODE | MUSB_TXCSR_DMAENAB;
+ /* autoset shouldn't be set in high bandwidth */
+ if (qh->hb_mult == 1)
+ csr |= MUSB_TXCSR_AUTOSET;
} else {
mode = 0;
csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
@@ -703,15 +681,8 @@
void __iomem *mbase = musb->mregs;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
- struct musb_qh *qh;
- u16 packet_sz;
-
- if (!is_out || hw_ep->is_shared_fifo)
- qh = hw_ep->in_qh;
- else
- qh = hw_ep->out_qh;
-
- packet_sz = qh->maxpacket;
+ struct musb_qh *qh = musb_ep_get_qh(hw_ep, !is_out);
+ u16 packet_sz = qh->maxpacket;
DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s "
"h_addr%02x h_port%02x bytes %d\n",
@@ -1129,17 +1100,14 @@
u16 tx_csr;
size_t length = 0;
size_t offset = 0;
- struct urb *urb;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
- struct musb_qh *qh = hw_ep->is_shared_fifo ? hw_ep->in_qh
- : hw_ep->out_qh;
+ struct musb_qh *qh = hw_ep->out_qh;
+ struct urb *urb = next_urb(qh);
u32 status = 0;
void __iomem *mbase = musb->mregs;
struct dma_channel *dma;
- urb = next_urb(qh);
-
musb_ep_select(mbase, epnum);
tx_csr = musb_readw(epio, MUSB_TXCSR);
@@ -1427,7 +1395,7 @@
urb->actual_length += dma->actual_len;
dma->actual_len = 0L;
}
- musb_save_toggle(ep, 1, urb);
+ musb_save_toggle(cur_qh, 1, urb);
/* move cur_qh to end of queue */
list_move_tail(&cur_qh->ring, &musb->in_bulk);
@@ -1531,6 +1499,10 @@
/* packet error reported later */
iso_err = true;
}
+ } else if (rx_csr & MUSB_RXCSR_INCOMPRX) {
+ DBG(3, "end %d high bandwidth incomplete ISO packet RX\n",
+ epnum);
+ status = -EPROTO;
}
/* faults abort the transfer */
@@ -1738,7 +1710,11 @@
val &= ~MUSB_RXCSR_H_AUTOREQ;
else
val |= MUSB_RXCSR_H_AUTOREQ;
- val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
+ val |= MUSB_RXCSR_DMAENAB;
+
+ /* autoclear shouldn't be set in high bandwidth */
+ if (qh->hb_mult == 1)
+ val |= MUSB_RXCSR_AUTOCLEAR;
musb_writew(epio, MUSB_RXCSR,
MUSB_RXCSR_H_WZC_BITS | val);
@@ -1817,19 +1793,17 @@
epnum++, hw_ep++) {
int diff;
- if (is_in || hw_ep->is_shared_fifo) {
- if (hw_ep->in_qh != NULL)
- continue;
- } else if (hw_ep->out_qh != NULL)
+ if (musb_ep_get_qh(hw_ep, is_in) != NULL)
continue;
if (hw_ep == musb->bulk_ep)
continue;
if (is_in)
- diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
+ diff = hw_ep->max_packet_sz_rx;
else
- diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
+ diff = hw_ep->max_packet_sz_tx;
+ diff -= (qh->maxpacket * qh->hb_mult);
if (diff >= 0 && best_diff > diff) {
best_diff = diff;
@@ -1932,15 +1906,27 @@
qh->is_ready = 1;
qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
+ qh->type = usb_endpoint_type(epd);
- /* no high bandwidth support yet */
- if (qh->maxpacket & ~0x7ff) {
- ret = -EMSGSIZE;
- goto done;
+ /* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier.
+ * Some musb cores don't support high bandwidth ISO transfers; and
+ * we don't (yet!) support high bandwidth interrupt transfers.
+ */
+ qh->hb_mult = 1 + ((qh->maxpacket >> 11) & 0x03);
+ if (qh->hb_mult > 1) {
+ int ok = (qh->type == USB_ENDPOINT_XFER_ISOC);
+
+ if (ok)
+ ok = (usb_pipein(urb->pipe) && musb->hb_iso_rx)
+ || (usb_pipeout(urb->pipe) && musb->hb_iso_tx);
+ if (!ok) {
+ ret = -EMSGSIZE;
+ goto done;
+ }
+ qh->maxpacket &= 0x7ff;
}
qh->epnum = usb_endpoint_num(epd);
- qh->type = usb_endpoint_type(epd);
/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
@@ -2052,14 +2038,15 @@
* called with controller locked, irqs blocked
* that hardware queue advances to the next transfer, unless prevented
*/
-static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
+static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
{
struct musb_hw_ep *ep = qh->hw_ep;
void __iomem *epio = ep->regs;
unsigned hw_end = ep->epnum;
void __iomem *regs = ep->musb->mregs;
- u16 csr;
+ int is_in = usb_pipein(urb->pipe);
int status = 0;
+ u16 csr;
musb_ep_select(regs, hw_end);
@@ -2112,14 +2099,14 @@
{
struct musb *musb = hcd_to_musb(hcd);
struct musb_qh *qh;
- struct list_head *sched;
unsigned long flags;
+ int is_in = usb_pipein(urb->pipe);
int ret;
DBG(4, "urb=%p, dev%d ep%d%s\n", urb,
usb_pipedevice(urb->pipe),
usb_pipeendpoint(urb->pipe),
- usb_pipein(urb->pipe) ? "in" : "out");
+ is_in ? "in" : "out");
spin_lock_irqsave(&musb->lock, flags);
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
@@ -2130,47 +2117,25 @@
if (!qh)
goto done;
- /* Any URB not actively programmed into endpoint hardware can be
+ /*
+ * Any URB not actively programmed into endpoint hardware can be
* immediately given back; that's any URB not at the head of an
* endpoint queue, unless someday we get real DMA queues. And even
* if it's at the head, it might not be known to the hardware...
*
- * Otherwise abort current transfer, pending dma, etc.; urb->status
+ * Otherwise abort current transfer, pending DMA, etc.; urb->status
* has already been updated. This is a synchronous abort; it'd be
* OK to hold off until after some IRQ, though.
+ *
+ * NOTE: qh is invalid unless !list_empty(&hep->urb_list)
*/
- if (!qh->is_ready || urb->urb_list.prev != &qh->hep->urb_list)
- ret = -EINPROGRESS;
- else {
- switch (qh->type) {
- case USB_ENDPOINT_XFER_CONTROL:
- sched = &musb->control;
- break;
- case USB_ENDPOINT_XFER_BULK:
- if (qh->mux == 1) {
- if (usb_pipein(urb->pipe))
- sched = &musb->in_bulk;
- else
- sched = &musb->out_bulk;
- break;
- }
- default:
- /* REVISIT when we get a schedule tree, periodic
- * transfers won't always be at the head of a
- * singleton queue...
- */
- sched = NULL;
- break;
- }
- }
-
- /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
- if (ret < 0 || (sched && qh != first_qh(sched))) {
+ if (!qh->is_ready
+ || urb->urb_list.prev != &qh->hep->urb_list
+ || musb_ep_get_qh(qh->hw_ep, is_in) != qh) {
int ready = qh->is_ready;
- ret = 0;
qh->is_ready = 0;
- __musb_giveback(musb, urb, 0);
+ musb_giveback(musb, urb, 0);
qh->is_ready = ready;
/* If nothing else (usually musb_giveback) is using it
@@ -2182,7 +2147,7 @@
kfree(qh);
}
} else
- ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+ ret = musb_cleanup_urb(urb, qh);
done:
spin_unlock_irqrestore(&musb->lock, flags);
return ret;
@@ -2192,13 +2157,11 @@
static void
musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
{
- u8 epnum = hep->desc.bEndpointAddress;
+ u8 is_in = hep->desc.bEndpointAddress & USB_DIR_IN;
unsigned long flags;
struct musb *musb = hcd_to_musb(hcd);
- u8 is_in = epnum & USB_DIR_IN;
struct musb_qh *qh;
struct urb *urb;
- struct list_head *sched;
spin_lock_irqsave(&musb->lock, flags);
@@ -2206,31 +2169,11 @@
if (qh == NULL)
goto exit;
- switch (qh->type) {
- case USB_ENDPOINT_XFER_CONTROL:
- sched = &musb->control;
- break;
- case USB_ENDPOINT_XFER_BULK:
- if (qh->mux == 1) {
- if (is_in)
- sched = &musb->in_bulk;
- else
- sched = &musb->out_bulk;
- break;
- }
- default:
- /* REVISIT when we get a schedule tree, periodic transfers
- * won't always be at the head of a singleton queue...
- */
- sched = NULL;
- break;
- }
+ /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
- /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
-
- /* kick first urb off the hardware, if needed */
+ /* Kick the first URB off the hardware, if needed */
qh->is_ready = 0;
- if (!sched || qh == first_qh(sched)) {
+ if (musb_ep_get_qh(qh->hw_ep, is_in) == qh) {
urb = next_urb(qh);
/* make software (then hardware) stop ASAP */
@@ -2238,7 +2181,7 @@
urb->status = -ESHUTDOWN;
/* cleanup */
- musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+ musb_cleanup_urb(urb, qh);
/* Then nuke all the others ... and advance the
* queue on hw_ep (e.g. bulk ring) when we're done.
@@ -2254,7 +2197,7 @@
* will activate any of these as it advances.
*/
while (!list_empty(&hep->urb_list))
- __musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
+ musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
hep->hcpriv = NULL;
list_del(&qh->ring);
@@ -2293,7 +2236,7 @@
{
struct musb *musb = hcd_to_musb(hcd);
- if (musb->xceiv.state == OTG_STATE_A_SUSPEND)
+ if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
return 0;
if (is_host_active(musb) && musb->is_active) {
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 0b7fbcd..14b0077 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -67,6 +67,7 @@
u8 is_ready; /* safe to modify hw_ep */
u8 type; /* XFERTYPE_* */
u8 epnum;
+ u8 hb_mult; /* high bandwidth pkts per uf */
u16 maxpacket;
u16 frame; /* for periodic schedule */
unsigned iso_idx; /* in urb->iso_frame_desc[] */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index bf677ac..bfe5fe4 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -78,18 +78,22 @@
DBG(3, "Root port suspended, power %02x\n", power);
musb->port1_status |= USB_PORT_STAT_SUSPEND;
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_HOST:
- musb->xceiv.state = OTG_STATE_A_SUSPEND;
+ musb->xceiv->state = OTG_STATE_A_SUSPEND;
musb->is_active = is_otg_enabled(musb)
- && musb->xceiv.host->b_hnp_enable;
+ && musb->xceiv->host->b_hnp_enable;
+ if (musb->is_active)
+ mod_timer(&musb->otg_timer, jiffies
+ + msecs_to_jiffies(
+ OTG_TIME_A_AIDL_BDIS));
musb_platform_try_idle(musb, 0);
break;
#ifdef CONFIG_USB_MUSB_OTG
case OTG_STATE_B_HOST:
- musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+ musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
musb->is_active = is_otg_enabled(musb)
- && musb->xceiv.host->b_hnp_enable;
+ && musb->xceiv->host->b_hnp_enable;
musb_platform_try_idle(musb, 0);
break;
#endif
@@ -116,7 +120,7 @@
void __iomem *mbase = musb->mregs;
#ifdef CONFIG_USB_MUSB_OTG
- if (musb->xceiv.state == OTG_STATE_B_IDLE) {
+ if (musb->xceiv->state == OTG_STATE_B_IDLE) {
DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n");
musb->port1_status &= ~USB_PORT_STAT_RESET;
return;
@@ -186,14 +190,23 @@
usb_hcd_poll_rh_status(musb_to_hcd(musb));
musb->is_active = 0;
- switch (musb->xceiv.state) {
- case OTG_STATE_A_HOST:
+ switch (musb->xceiv->state) {
case OTG_STATE_A_SUSPEND:
- musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+#ifdef CONFIG_USB_MUSB_OTG
+ if (is_otg_enabled(musb)
+ && musb->xceiv->host->b_hnp_enable) {
+ musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
+ musb->g.is_a_peripheral = 1;
+ break;
+ }
+#endif
+ /* FALLTHROUGH */
+ case OTG_STATE_A_HOST:
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
musb->is_active = 0;
break;
case OTG_STATE_A_WAIT_VFALL:
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
break;
default:
DBG(1, "host disconnect (%s)\n", otg_state_string(musb));
@@ -332,7 +345,7 @@
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
usb_hcd_poll_rh_status(musb_to_hcd(musb));
/* NOTE: it might really be A_WAIT_BCON ... */
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
}
put_unaligned(cpu_to_le32(musb->port1_status
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 60924ce..3487520 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -44,7 +44,6 @@
#define get_cpu_rev() 2
#endif
-#define MUSB_TIMEOUT_A_WAIT_BCON 1100
static struct timer_list musb_idle_timer;
@@ -61,17 +60,17 @@
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_BCON:
devctl &= ~MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (devctl & MUSB_DEVCTL_BDEVICE) {
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
} else {
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
}
break;
@@ -89,7 +88,7 @@
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
usb_hcd_poll_rh_status(musb_to_hcd(musb));
/* NOTE: it might really be A_WAIT_BCON ... */
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
}
break;
#endif
@@ -97,9 +96,9 @@
case OTG_STATE_A_HOST:
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (devctl & MUSB_DEVCTL_BDEVICE)
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
else
- musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
#endif
default:
break;
@@ -118,7 +117,7 @@
/* Never idle if active, or when VBUS timeout is not set as host */
if (musb->is_active || ((musb->a_wait_bcon == 0)
- && (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+ && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
del_timer(&musb_idle_timer);
last_timer = jiffies;
@@ -163,8 +162,8 @@
if (is_on) {
musb->is_active = 1;
- musb->xceiv.default_a = 1;
- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
MUSB_HST_MODE(musb);
@@ -175,8 +174,8 @@
* jumping right to B_IDLE...
*/
- musb->xceiv.default_a = 0;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
devctl &= ~MUSB_DEVCTL_SESSION;
MUSB_DEV_MODE(musb);
@@ -188,10 +187,6 @@
otg_state_string(musb),
musb_readb(musb->mregs, MUSB_DEVCTL));
}
-static int omap_set_power(struct otg_transceiver *x, unsigned mA)
-{
- return 0;
-}
static int musb_platform_resume(struct musb *musb);
@@ -202,24 +197,6 @@
devctl |= MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
- switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- case MUSB_HOST:
- otg_set_host(&musb->xceiv, musb->xceiv.host);
- break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- case MUSB_PERIPHERAL:
- otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget);
- break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
- case MUSB_OTG:
- break;
-#endif
- default:
- return -EINVAL;
- }
return 0;
}
@@ -231,6 +208,16 @@
omap_cfg_reg(AE5_2430_USB0HS_STP);
#endif
+ /* We require some kind of external transceiver, hooked
+ * up through ULPI. TWL4030-family PMICs include one,
+ * which needs a driver, drivers aren't always needed.
+ */
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv) {
+ pr_err("HS USB OTG: no transceiver configured\n");
+ return -ENODEV;
+ }
+
musb_platform_resume(musb);
l = omap_readl(OTG_SYSCONFIG);
@@ -240,7 +227,12 @@
l &= ~AUTOIDLE; /* disable auto idle */
l &= ~NOIDLE; /* remove possible noidle */
l |= SMARTIDLE; /* enable smart idle */
- l |= AUTOIDLE; /* enable auto idle */
+ /*
+ * MUSB AUTOIDLE don't work in 3430.
+ * Workaround by Richard Woodruff/TI
+ */
+ if (!cpu_is_omap3430())
+ l |= AUTOIDLE; /* enable auto idle */
omap_writel(l, OTG_SYSCONFIG);
l = omap_readl(OTG_INTERFSEL);
@@ -257,9 +249,6 @@
if (is_host_enabled(musb))
musb->board_set_vbus = omap_set_vbus;
- if (is_peripheral_enabled(musb))
- musb->xceiv.set_power = omap_set_power;
- musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON;
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
@@ -282,8 +271,7 @@
l |= ENABLEWAKEUP; /* enable wakeup */
omap_writel(l, OTG_SYSCONFIG);
- if (musb->xceiv.set_suspend)
- musb->xceiv.set_suspend(&musb->xceiv, 1);
+ otg_set_suspend(musb->xceiv, 1);
if (musb->set_clock)
musb->set_clock(musb->clock, 0);
@@ -300,8 +288,7 @@
if (!musb->clock)
return 0;
- if (musb->xceiv.set_suspend)
- musb->xceiv.set_suspend(&musb->xceiv, 0);
+ otg_set_suspend(musb->xceiv, 0);
if (musb->set_clock)
musb->set_clock(musb->clock, 1);
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 4ac1477..88b587c 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -259,6 +259,8 @@
tusb_fifo_read_unaligned(fifo, buf, len);
}
+static struct musb *the_musb;
+
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
/* This is used by gadget drivers, and OTG transceiver logic, allowing
@@ -269,7 +271,7 @@
*/
static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
{
- struct musb *musb = container_of(x, struct musb, xceiv);
+ struct musb *musb = the_musb;
void __iomem *tbase = musb->ctrl_base;
u32 reg;
@@ -419,7 +421,7 @@
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_BCON:
if ((musb->a_wait_bcon != 0)
&& (musb->idle_timeout == 0
@@ -483,7 +485,7 @@
/* Never idle if active, or when VBUS timeout is not set as host */
if (musb->is_active || ((musb->a_wait_bcon == 0)
- && (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+ && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
del_timer(&musb_idle_timer);
last_timer = jiffies;
@@ -532,8 +534,8 @@
if (musb->set_clock)
musb->set_clock(musb->clock, 1);
timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
- musb->xceiv.default_a = 1;
- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
conf |= TUSB_DEV_CONF_USB_HOST_MODE;
@@ -546,24 +548,24 @@
/* If ID pin is grounded, we want to be a_idle */
otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_VRISE:
case OTG_STATE_A_WAIT_BCON:
- musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
break;
case OTG_STATE_A_WAIT_VFALL:
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
break;
default:
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
}
musb->is_active = 0;
- musb->xceiv.default_a = 1;
+ musb->xceiv->default_a = 1;
MUSB_HST_MODE(musb);
} else {
musb->is_active = 0;
- musb->xceiv.default_a = 0;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
}
@@ -674,7 +676,7 @@
else
default_a = is_host_enabled(musb);
DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
- musb->xceiv.default_a = default_a;
+ musb->xceiv->default_a = default_a;
tusb_source_power(musb, default_a);
/* Don't allow idling immediately */
@@ -686,7 +688,7 @@
if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
/* B-dev state machine: no vbus ~= disconnect */
- if ((is_otg_enabled(musb) && !musb->xceiv.default_a)
+ if ((is_otg_enabled(musb) && !musb->xceiv->default_a)
|| !is_host_enabled(musb)) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
/* ? musb_root_disconnect(musb); */
@@ -701,9 +703,9 @@
if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
DBG(1, "Forcing disconnect (no interrupt)\n");
- if (musb->xceiv.state != OTG_STATE_B_IDLE) {
+ if (musb->xceiv->state != OTG_STATE_B_IDLE) {
/* INTR_DISCONNECT can hide... */
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
musb->int_usb |= MUSB_INTR_DISCONNECT;
}
musb->is_active = 0;
@@ -717,7 +719,7 @@
DBG(2, "vbus change, %s, otg %03x\n",
otg_state_string(musb), otg_stat);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_IDLE:
DBG(2, "Got SRP, turning on VBUS\n");
musb_set_vbus(musb, 1);
@@ -765,7 +767,7 @@
DBG(4, "%s timer, %03x\n", otg_state_string(musb), otg_stat);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_VRISE:
/* VBUS has probably been valid for a while now,
* but may well have bounced out of range a bit
@@ -777,7 +779,7 @@
DBG(2, "devctl %02x\n", devctl);
break;
}
- musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
musb->is_active = 0;
idle_timeout = jiffies
+ msecs_to_jiffies(musb->a_wait_bcon);
@@ -1093,9 +1095,14 @@
{
struct platform_device *pdev;
struct resource *mem;
- void __iomem *sync;
+ void __iomem *sync = NULL;
int ret;
+ usb_nop_xceiv_register();
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv)
+ return -ENODEV;
+
pdev = to_platform_device(musb->controller);
/* dma address for async dma */
@@ -1106,14 +1113,16 @@
mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!mem) {
pr_debug("no sync dma resource?\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto done;
}
musb->sync = mem->start;
sync = ioremap(mem->start, mem->end - mem->start + 1);
if (!sync) {
pr_debug("ioremap for sync failed\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto done;
}
musb->sync_va = sync;
@@ -1126,28 +1135,37 @@
if (ret) {
printk(KERN_ERR "Could not start tusb6010 (%d)\n",
ret);
- return -ENODEV;
+ goto done;
}
musb->isr = tusb_interrupt;
if (is_host_enabled(musb))
musb->board_set_vbus = tusb_source_power;
- if (is_peripheral_enabled(musb))
- musb->xceiv.set_power = tusb_draw_power;
+ if (is_peripheral_enabled(musb)) {
+ musb->xceiv->set_power = tusb_draw_power;
+ the_musb = musb;
+ }
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+done:
+ if (ret < 0) {
+ if (sync)
+ iounmap(sync);
+ usb_nop_xceiv_unregister();
+ }
return ret;
}
int musb_platform_exit(struct musb *musb)
{
del_timer_sync(&musb_idle_timer);
+ the_musb = NULL;
if (musb->board_set_power)
musb->board_set_power(0);
iounmap(musb->sync_va);
-
+ usb_nop_xceiv_unregister();
return 0;
}
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index aa884d0..69feeec 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -59,4 +59,18 @@
built-in with usb ip or which are autonomous and doesn't require any
phy programming such as ISP1x04 etc.
+config USB_LANGWELL_OTG
+ tristate "Intel Langwell USB OTG dual-role support"
+ depends on USB && MRST
+ select USB_OTG
+ select USB_OTG_UTILS
+ help
+ Say Y here if you want to build Intel Langwell USB OTG
+ transciever driver in kernel. This driver implements role
+ switch between EHCI host driver and Langwell USB OTG
+ client driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called langwell_otg.
+
endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 2081678..6d1abdd 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
+obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o
obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o
ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
new file mode 100644
index 0000000..6f628d0
--- /dev/null
+++ b/drivers/usb/otg/langwell_otg.c
@@ -0,0 +1,1915 @@
+/*
+ * Intel Langwell USB OTG transceiver driver
+ * Copyright (C) 2008 - 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+/* This driver helps to switch Langwell OTG controller function between host
+ * and peripheral. It works with EHCI driver and Langwell client controller
+ * driver together.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/notifier.h>
+#include <asm/ipc_defs.h>
+#include <linux/delay.h>
+#include "../core/hcd.h"
+
+#include <linux/usb/langwell_otg.h>
+
+#define DRIVER_DESC "Intel Langwell USB OTG transceiver driver"
+#define DRIVER_VERSION "3.0.0.32L.0002"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+static const char driver_name[] = "langwell_otg";
+
+static int langwell_otg_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id);
+static void langwell_otg_remove(struct pci_dev *pdev);
+static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message);
+static int langwell_otg_resume(struct pci_dev *pdev);
+
+static int langwell_otg_set_host(struct otg_transceiver *otg,
+ struct usb_bus *host);
+static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
+ struct usb_gadget *gadget);
+static int langwell_otg_start_srp(struct otg_transceiver *otg);
+
+static const struct pci_device_id pci_ids[] = {{
+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class_mask = ~0,
+ .vendor = 0x8086,
+ .device = 0x0811,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+}, { /* end: all zeroes */ }
+};
+
+static struct pci_driver otg_pci_driver = {
+ .name = (char *) driver_name,
+ .id_table = pci_ids,
+
+ .probe = langwell_otg_probe,
+ .remove = langwell_otg_remove,
+
+ .suspend = langwell_otg_suspend,
+ .resume = langwell_otg_resume,
+};
+
+static const char *state_string(enum usb_otg_state state)
+{
+ switch (state) {
+ case OTG_STATE_A_IDLE:
+ return "a_idle";
+ case OTG_STATE_A_WAIT_VRISE:
+ return "a_wait_vrise";
+ case OTG_STATE_A_WAIT_BCON:
+ return "a_wait_bcon";
+ case OTG_STATE_A_HOST:
+ return "a_host";
+ case OTG_STATE_A_SUSPEND:
+ return "a_suspend";
+ case OTG_STATE_A_PERIPHERAL:
+ return "a_peripheral";
+ case OTG_STATE_A_WAIT_VFALL:
+ return "a_wait_vfall";
+ case OTG_STATE_A_VBUS_ERR:
+ return "a_vbus_err";
+ case OTG_STATE_B_IDLE:
+ return "b_idle";
+ case OTG_STATE_B_SRP_INIT:
+ return "b_srp_init";
+ case OTG_STATE_B_PERIPHERAL:
+ return "b_peripheral";
+ case OTG_STATE_B_WAIT_ACON:
+ return "b_wait_acon";
+ case OTG_STATE_B_HOST:
+ return "b_host";
+ default:
+ return "UNDEFINED";
+ }
+}
+
+/* HSM timers */
+static inline struct langwell_otg_timer *otg_timer_initializer
+(void (*function)(unsigned long), unsigned long expires, unsigned long data)
+{
+ struct langwell_otg_timer *timer;
+ timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL);
+ timer->function = function;
+ timer->expires = expires;
+ timer->data = data;
+ return timer;
+}
+
+static struct langwell_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr,
+ *a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_res_tmr,
+ *b_bus_suspend_tmr;
+
+static struct list_head active_timers;
+
+static struct langwell_otg *the_transceiver;
+
+/* host/client notify transceiver when event affects HNP state */
+void langwell_update_transceiver()
+{
+ otg_dbg("transceiver driver is notified\n");
+ queue_work(the_transceiver->qwork, &the_transceiver->work);
+}
+EXPORT_SYMBOL(langwell_update_transceiver);
+
+static int langwell_otg_set_host(struct otg_transceiver *otg,
+ struct usb_bus *host)
+{
+ otg->host = host;
+
+ return 0;
+}
+
+static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
+ struct usb_gadget *gadget)
+{
+ otg->gadget = gadget;
+
+ return 0;
+}
+
+static int langwell_otg_set_power(struct otg_transceiver *otg,
+ unsigned mA)
+{
+ return 0;
+}
+
+/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/
+static void langwell_otg_drv_vbus(int on)
+{
+ struct ipc_pmic_reg_data pmic_data = {0};
+ struct ipc_pmic_reg_data battery_data;
+
+ /* Check if battery is attached or not */
+ battery_data.pmic_reg_data[0].register_address = 0xd2;
+ battery_data.ioc = 0;
+ battery_data.num_entries = 1;
+ if (ipc_pmic_register_read(&battery_data)) {
+ otg_dbg("Failed to read PMIC register 0xd2.\n");
+ return;
+ }
+
+ if ((battery_data.pmic_reg_data[0].value & 0x20) == 0) {
+ otg_dbg("no battery attached\n");
+ return;
+ }
+
+ /* Workaround for battery attachment issue */
+ if (battery_data.pmic_reg_data[0].value == 0x34) {
+ otg_dbg("battery \n");
+ return;
+ }
+
+ otg_dbg("battery attached\n");
+
+ pmic_data.ioc = 0;
+ pmic_data.pmic_reg_data[0].register_address = 0xD4;
+ pmic_data.num_entries = 1;
+ if (on)
+ pmic_data.pmic_reg_data[0].value = 0x20;
+ else
+ pmic_data.pmic_reg_data[0].value = 0xc0;
+
+ if (ipc_pmic_register_write(&pmic_data, TRUE))
+ otg_dbg("Failed to write PMIC.\n");
+
+}
+
+/* charge vbus or discharge vbus through a resistor to ground */
+static void langwell_otg_chrg_vbus(int on)
+{
+
+ u32 val;
+
+ val = readl(the_transceiver->regs + CI_OTGSC);
+
+ if (on)
+ writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC,
+ the_transceiver->regs + CI_OTGSC);
+ else
+ writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD,
+ the_transceiver->regs + CI_OTGSC);
+
+}
+
+/* Start SRP */
+static int langwell_otg_start_srp(struct otg_transceiver *otg)
+{
+ u32 val;
+
+ otg_dbg("Start SRP ->\n");
+
+ val = readl(the_transceiver->regs + CI_OTGSC);
+
+ writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP,
+ the_transceiver->regs + CI_OTGSC);
+
+ /* Check if the data plus is finished or not */
+ msleep(8);
+ val = readl(the_transceiver->regs + CI_OTGSC);
+ if (val & (OTGSC_HADP | OTGSC_DP))
+ otg_dbg("DataLine SRP Error\n");
+
+ /* FIXME: VBus SRP */
+
+ return 0;
+}
+
+
+/* stop SOF via bus_suspend */
+static void langwell_otg_loc_sof(int on)
+{
+ struct usb_hcd *hcd;
+ int err;
+
+ otg_dbg("loc_sof -> %d\n", on);
+
+ hcd = bus_to_hcd(the_transceiver->otg.host);
+ if (on)
+ err = hcd->driver->bus_resume(hcd);
+ else
+ err = hcd->driver->bus_suspend(hcd);
+
+ if (err)
+ otg_dbg("Failed to resume/suspend bus - %d\n", err);
+}
+
+static void langwell_otg_phy_low_power(int on)
+{
+ u32 val;
+
+ otg_dbg("phy low power mode-> %d\n", on);
+
+ val = readl(the_transceiver->regs + CI_HOSTPC1);
+ if (on)
+ writel(val | HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
+ else
+ writel(val & ~HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
+}
+
+/* Enable/Disable OTG interrupt */
+static void langwell_otg_intr(int on)
+{
+ u32 val;
+
+ otg_dbg("interrupt -> %d\n", on);
+
+ val = readl(the_transceiver->regs + CI_OTGSC);
+ if (on) {
+ val = val | (OTGSC_INTEN_MASK | OTGSC_IDPU);
+ writel(val, the_transceiver->regs + CI_OTGSC);
+ } else {
+ val = val & ~(OTGSC_INTEN_MASK | OTGSC_IDPU);
+ writel(val, the_transceiver->regs + CI_OTGSC);
+ }
+}
+
+/* set HAAR: Hardware Assist Auto-Reset */
+static void langwell_otg_HAAR(int on)
+{
+ u32 val;
+
+ otg_dbg("HAAR -> %d\n", on);
+
+ val = readl(the_transceiver->regs + CI_OTGSC);
+ if (on)
+ writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR,
+ the_transceiver->regs + CI_OTGSC);
+ else
+ writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR,
+ the_transceiver->regs + CI_OTGSC);
+}
+
+/* set HABA: Hardware Assist B-Disconnect to A-Connect */
+static void langwell_otg_HABA(int on)
+{
+ u32 val;
+
+ otg_dbg("HABA -> %d\n", on);
+
+ val = readl(the_transceiver->regs + CI_OTGSC);
+ if (on)
+ writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA,
+ the_transceiver->regs + CI_OTGSC);
+ else
+ writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA,
+ the_transceiver->regs + CI_OTGSC);
+}
+
+static int langwell_otg_check_se0_srp(int on)
+{
+ u32 val;
+
+ int delay_time = TB_SE0_SRP * 10; /* step is 100us */
+
+ otg_dbg("check_se0_srp -> \n");
+
+ do {
+ udelay(100);
+ if (!delay_time--)
+ break;
+ val = readl(the_transceiver->regs + CI_PORTSC1);
+ val &= PORTSC_LS;
+ } while (!val);
+
+ otg_dbg("check_se0_srp <- \n");
+ return val;
+}
+
+/* The timeout callback function to set time out bit */
+static void set_tmout(unsigned long indicator)
+{
+ *(int *)indicator = 1;
+}
+
+void langwell_otg_nsf_msg(unsigned long indicator)
+{
+ switch (indicator) {
+ case 2:
+ case 4:
+ case 6:
+ case 7:
+ printk(KERN_ERR "OTG:NSF-%lu - deivce not responding\n",
+ indicator);
+ break;
+ case 3:
+ printk(KERN_ERR "OTG:NSF-%lu - deivce not supported\n",
+ indicator);
+ break;
+ default:
+ printk(KERN_ERR "Do not have this kind of NSF\n");
+ break;
+ }
+}
+
+/* Initialize timers */
+static void langwell_otg_init_timers(struct otg_hsm *hsm)
+{
+ /* HSM used timers */
+ a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
+ (unsigned long)&hsm->a_wait_vrise_tmout);
+ a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
+ (unsigned long)&hsm->a_wait_bcon_tmout);
+ a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
+ (unsigned long)&hsm->a_aidl_bdis_tmout);
+ b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
+ (unsigned long)&hsm->b_ase0_brst_tmout);
+ b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
+ (unsigned long)&hsm->b_se0_srp);
+ b_srp_res_tmr = otg_timer_initializer(&set_tmout, TB_SRP_RES,
+ (unsigned long)&hsm->b_srp_res_tmout);
+ b_bus_suspend_tmr = otg_timer_initializer(&set_tmout, TB_BUS_SUSPEND,
+ (unsigned long)&hsm->b_bus_suspend_tmout);
+}
+
+/* Free timers */
+static void langwell_otg_free_timers(void)
+{
+ kfree(a_wait_vrise_tmr);
+ kfree(a_wait_bcon_tmr);
+ kfree(a_aidl_bdis_tmr);
+ kfree(b_ase0_brst_tmr);
+ kfree(b_se0_srp_tmr);
+ kfree(b_srp_res_tmr);
+ kfree(b_bus_suspend_tmr);
+}
+
+/* Add timer to timer list */
+static void langwell_otg_add_timer(void *gtimer)
+{
+ struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
+ struct langwell_otg_timer *tmp_timer;
+ u32 val32;
+
+ /* Check if the timer is already in the active list,
+ * if so update timer count
+ */
+ list_for_each_entry(tmp_timer, &active_timers, list)
+ if (tmp_timer == timer) {
+ timer->count = timer->expires;
+ return;
+ }
+ timer->count = timer->expires;
+
+ if (list_empty(&active_timers)) {
+ val32 = readl(the_transceiver->regs + CI_OTGSC);
+ writel(val32 | OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
+ }
+
+ list_add_tail(&timer->list, &active_timers);
+}
+
+/* Remove timer from the timer list; clear timeout status */
+static void langwell_otg_del_timer(void *gtimer)
+{
+ struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
+ struct langwell_otg_timer *tmp_timer, *del_tmp;
+ u32 val32;
+
+ list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
+ if (tmp_timer == timer)
+ list_del(&timer->list);
+
+ if (list_empty(&active_timers)) {
+ val32 = readl(the_transceiver->regs + CI_OTGSC);
+ writel(val32 & ~OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
+ }
+}
+
+/* Reduce timer count by 1, and find timeout conditions.*/
+static int langwell_otg_tick_timer(u32 *int_sts)
+{
+ struct langwell_otg_timer *tmp_timer, *del_tmp;
+ int expired = 0;
+
+ list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
+ tmp_timer->count--;
+ /* check if timer expires */
+ if (!tmp_timer->count) {
+ list_del(&tmp_timer->list);
+ tmp_timer->function(tmp_timer->data);
+ expired = 1;
+ }
+ }
+
+ if (list_empty(&active_timers)) {
+ otg_dbg("tick timer: disable 1ms int\n");
+ *int_sts = *int_sts & ~OTGSC_1MSE;
+ }
+ return expired;
+}
+
+static void reset_otg(void)
+{
+ u32 val;
+ int delay_time = 1000;
+
+ otg_dbg("reseting OTG controller ...\n");
+ val = readl(the_transceiver->regs + CI_USBCMD);
+ writel(val | USBCMD_RST, the_transceiver->regs + CI_USBCMD);
+ do {
+ udelay(100);
+ if (!delay_time--)
+ otg_dbg("reset timeout\n");
+ val = readl(the_transceiver->regs + CI_USBCMD);
+ val &= USBCMD_RST;
+ } while (val != 0);
+ otg_dbg("reset done.\n");
+}
+
+static void set_host_mode(void)
+{
+ u32 val;
+
+ reset_otg();
+ val = readl(the_transceiver->regs + CI_USBMODE);
+ val = (val & (~USBMODE_CM)) | USBMODE_HOST;
+ writel(val, the_transceiver->regs + CI_USBMODE);
+}
+
+static void set_client_mode(void)
+{
+ u32 val;
+
+ reset_otg();
+ val = readl(the_transceiver->regs + CI_USBMODE);
+ val = (val & (~USBMODE_CM)) | USBMODE_DEVICE;
+ writel(val, the_transceiver->regs + CI_USBMODE);
+}
+
+static void init_hsm(void)
+{
+ struct langwell_otg *langwell = the_transceiver;
+ u32 val32;
+
+ /* read OTGSC after reset */
+ val32 = readl(langwell->regs + CI_OTGSC);
+ otg_dbg("%s: OTGSC init value = 0x%x\n", __func__, val32);
+
+ /* set init state */
+ if (val32 & OTGSC_ID) {
+ langwell->hsm.id = 1;
+ langwell->otg.default_a = 0;
+ set_client_mode();
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ langwell_otg_drv_vbus(0);
+ } else {
+ langwell->hsm.id = 0;
+ langwell->otg.default_a = 1;
+ set_host_mode();
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ }
+
+ /* set session indicator */
+ if (val32 & OTGSC_BSE)
+ langwell->hsm.b_sess_end = 1;
+ if (val32 & OTGSC_BSV)
+ langwell->hsm.b_sess_vld = 1;
+ if (val32 & OTGSC_ASV)
+ langwell->hsm.a_sess_vld = 1;
+ if (val32 & OTGSC_AVV)
+ langwell->hsm.a_vbus_vld = 1;
+
+ /* defautly power the bus */
+ langwell->hsm.a_bus_req = 1;
+ langwell->hsm.a_bus_drop = 0;
+ /* defautly don't request bus as B device */
+ langwell->hsm.b_bus_req = 0;
+ /* no system error */
+ langwell->hsm.a_clr_err = 0;
+}
+
+static irqreturn_t otg_dummy_irq(int irq, void *_dev)
+{
+ void __iomem *reg_base = _dev;
+ u32 val;
+ u32 int_mask = 0;
+
+ val = readl(reg_base + CI_USBMODE);
+ if ((val & USBMODE_CM) != USBMODE_DEVICE)
+ return IRQ_NONE;
+
+ val = readl(reg_base + CI_USBSTS);
+ int_mask = val & INTR_DUMMY_MASK;
+
+ if (int_mask == 0)
+ return IRQ_NONE;
+
+ /* clear hsm.b_conn here since host driver can't detect it
+ * otg_dummy_irq called means B-disconnect happened.
+ */
+ if (the_transceiver->hsm.b_conn) {
+ the_transceiver->hsm.b_conn = 0;
+ if (spin_trylock(&the_transceiver->wq_lock)) {
+ queue_work(the_transceiver->qwork,
+ &the_transceiver->work);
+ spin_unlock(&the_transceiver->wq_lock);
+ }
+ }
+ /* Clear interrupts */
+ writel(int_mask, reg_base + CI_USBSTS);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t otg_irq(int irq, void *_dev)
+{
+ struct langwell_otg *langwell = _dev;
+ u32 int_sts, int_en;
+ u32 int_mask = 0;
+ int flag = 0;
+
+ int_sts = readl(langwell->regs + CI_OTGSC);
+ int_en = (int_sts & OTGSC_INTEN_MASK) >> 8;
+ int_mask = int_sts & int_en;
+ if (int_mask == 0)
+ return IRQ_NONE;
+
+ if (int_mask & OTGSC_IDIS) {
+ otg_dbg("%s: id change int\n", __func__);
+ langwell->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0;
+ flag = 1;
+ }
+ if (int_mask & OTGSC_DPIS) {
+ otg_dbg("%s: data pulse int\n", __func__);
+ langwell->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0;
+ flag = 1;
+ }
+ if (int_mask & OTGSC_BSEIS) {
+ otg_dbg("%s: b session end int\n", __func__);
+ langwell->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0;
+ flag = 1;
+ }
+ if (int_mask & OTGSC_BSVIS) {
+ otg_dbg("%s: b session valid int\n", __func__);
+ langwell->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0;
+ flag = 1;
+ }
+ if (int_mask & OTGSC_ASVIS) {
+ otg_dbg("%s: a session valid int\n", __func__);
+ langwell->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0;
+ flag = 1;
+ }
+ if (int_mask & OTGSC_AVVIS) {
+ otg_dbg("%s: a vbus valid int\n", __func__);
+ langwell->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0;
+ flag = 1;
+ }
+
+ if (int_mask & OTGSC_1MSS) {
+ /* need to schedule otg_work if any timer is expired */
+ if (langwell_otg_tick_timer(&int_sts))
+ flag = 1;
+ }
+
+ writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask,
+ langwell->regs + CI_OTGSC);
+ if (flag)
+ queue_work(langwell->qwork, &langwell->work);
+
+ return IRQ_HANDLED;
+}
+
+static void langwell_otg_work(struct work_struct *work)
+{
+ struct langwell_otg *langwell = container_of(work,
+ struct langwell_otg, work);
+ int retval;
+
+ otg_dbg("%s: old state = %s\n", __func__,
+ state_string(langwell->otg.state));
+
+ switch (langwell->otg.state) {
+ case OTG_STATE_UNDEFINED:
+ case OTG_STATE_B_IDLE:
+ if (!langwell->hsm.id) {
+ langwell_otg_del_timer(b_srp_res_tmr);
+ langwell->otg.default_a = 1;
+ langwell->hsm.a_srp_det = 0;
+
+ langwell_otg_chrg_vbus(0);
+ langwell_otg_drv_vbus(0);
+
+ set_host_mode();
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.b_srp_res_tmout) {
+ langwell->hsm.b_srp_res_tmout = 0;
+ langwell->hsm.b_bus_req = 0;
+ langwell_otg_nsf_msg(6);
+ } else if (langwell->hsm.b_sess_vld) {
+ langwell_otg_del_timer(b_srp_res_tmr);
+ langwell->hsm.b_sess_end = 0;
+ langwell->hsm.a_bus_suspend = 0;
+
+ langwell_otg_chrg_vbus(0);
+ if (langwell->client_ops) {
+ langwell->client_ops->resume(langwell->pdev);
+ langwell->otg.state = OTG_STATE_B_PERIPHERAL;
+ } else
+ otg_dbg("client driver not loaded.\n");
+
+ } else if (langwell->hsm.b_bus_req &&
+ (langwell->hsm.b_sess_end)) {
+ /* workaround for b_se0_srp detection */
+ retval = langwell_otg_check_se0_srp(0);
+ if (retval) {
+ langwell->hsm.b_bus_req = 0;
+ otg_dbg("LS is not SE0, try again later\n");
+ } else {
+ /* Start SRP */
+ langwell_otg_start_srp(&langwell->otg);
+ langwell_otg_add_timer(b_srp_res_tmr);
+ }
+ }
+ break;
+ case OTG_STATE_B_SRP_INIT:
+ if (!langwell->hsm.id) {
+ langwell->otg.default_a = 1;
+ langwell->hsm.a_srp_det = 0;
+
+ langwell_otg_drv_vbus(0);
+ langwell_otg_chrg_vbus(0);
+
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.b_sess_vld) {
+ langwell_otg_chrg_vbus(0);
+ if (langwell->client_ops) {
+ langwell->client_ops->resume(langwell->pdev);
+ langwell->otg.state = OTG_STATE_B_PERIPHERAL;
+ } else
+ otg_dbg("client driver not loaded.\n");
+ }
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ if (!langwell->hsm.id) {
+ langwell->otg.default_a = 1;
+ langwell->hsm.a_srp_det = 0;
+
+ langwell_otg_drv_vbus(0);
+ langwell_otg_chrg_vbus(0);
+ set_host_mode();
+
+ if (langwell->client_ops) {
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ } else
+ otg_dbg("client driver has been removed.\n");
+
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (!langwell->hsm.b_sess_vld) {
+ langwell->hsm.b_hnp_enable = 0;
+
+ if (langwell->client_ops) {
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ } else
+ otg_dbg("client driver has been removed.\n");
+
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ } else if (langwell->hsm.b_bus_req && langwell->hsm.b_hnp_enable
+ && langwell->hsm.a_bus_suspend) {
+
+ if (langwell->client_ops) {
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ } else
+ otg_dbg("client driver has been removed.\n");
+
+ langwell_otg_HAAR(1);
+ langwell->hsm.a_conn = 0;
+
+ if (langwell->host_ops) {
+ langwell->host_ops->probe(langwell->pdev,
+ langwell->host_ops->id_table);
+ langwell->otg.state = OTG_STATE_B_WAIT_ACON;
+ } else
+ otg_dbg("host driver not loaded.\n");
+
+ langwell->hsm.a_bus_resume = 0;
+ langwell->hsm.b_ase0_brst_tmout = 0;
+ langwell_otg_add_timer(b_ase0_brst_tmr);
+ }
+ break;
+
+ case OTG_STATE_B_WAIT_ACON:
+ if (!langwell->hsm.id) {
+ langwell_otg_del_timer(b_ase0_brst_tmr);
+ langwell->otg.default_a = 1;
+ langwell->hsm.a_srp_det = 0;
+
+ langwell_otg_drv_vbus(0);
+ langwell_otg_chrg_vbus(0);
+ set_host_mode();
+
+ langwell_otg_HAAR(0);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (!langwell->hsm.b_sess_vld) {
+ langwell_otg_del_timer(b_ase0_brst_tmr);
+ langwell->hsm.b_hnp_enable = 0;
+ langwell->hsm.b_bus_req = 0;
+ langwell_otg_chrg_vbus(0);
+ langwell_otg_HAAR(0);
+
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ } else if (langwell->hsm.a_conn) {
+ langwell_otg_del_timer(b_ase0_brst_tmr);
+ langwell_otg_HAAR(0);
+ langwell->otg.state = OTG_STATE_B_HOST;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.a_bus_resume ||
+ langwell->hsm.b_ase0_brst_tmout) {
+ langwell_otg_del_timer(b_ase0_brst_tmr);
+ langwell_otg_HAAR(0);
+ langwell_otg_nsf_msg(7);
+
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+
+ langwell->hsm.a_bus_suspend = 0;
+ langwell->hsm.b_bus_req = 0;
+
+ if (langwell->client_ops)
+ langwell->client_ops->resume(langwell->pdev);
+ else
+ otg_dbg("client driver not loaded.\n");
+
+ langwell->otg.state = OTG_STATE_B_PERIPHERAL;
+ }
+ break;
+
+ case OTG_STATE_B_HOST:
+ if (!langwell->hsm.id) {
+ langwell->otg.default_a = 1;
+ langwell->hsm.a_srp_det = 0;
+
+ langwell_otg_drv_vbus(0);
+ langwell_otg_chrg_vbus(0);
+ set_host_mode();
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (!langwell->hsm.b_sess_vld) {
+ langwell->hsm.b_hnp_enable = 0;
+ langwell->hsm.b_bus_req = 0;
+ langwell_otg_chrg_vbus(0);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ } else if ((!langwell->hsm.b_bus_req) ||
+ (!langwell->hsm.a_conn)) {
+ langwell->hsm.b_bus_req = 0;
+ langwell_otg_loc_sof(0);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+
+ langwell->hsm.a_bus_suspend = 0;
+
+ if (langwell->client_ops)
+ langwell->client_ops->resume(langwell->pdev);
+ else
+ otg_dbg("client driver not loaded.\n");
+
+ langwell->otg.state = OTG_STATE_B_PERIPHERAL;
+ }
+ break;
+
+ case OTG_STATE_A_IDLE:
+ langwell->otg.default_a = 1;
+ if (langwell->hsm.id) {
+ langwell->otg.default_a = 0;
+ langwell->hsm.b_bus_req = 0;
+ langwell_otg_drv_vbus(0);
+ langwell_otg_chrg_vbus(0);
+
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.a_sess_vld) {
+ langwell_otg_drv_vbus(1);
+ langwell->hsm.a_srp_det = 1;
+ langwell->hsm.a_wait_vrise_tmout = 0;
+ langwell_otg_add_timer(a_wait_vrise_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (!langwell->hsm.a_bus_drop &&
+ (langwell->hsm.a_srp_det || langwell->hsm.a_bus_req)) {
+ langwell_otg_drv_vbus(1);
+ langwell->hsm.a_wait_vrise_tmout = 0;
+ langwell_otg_add_timer(a_wait_vrise_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
+ queue_work(langwell->qwork, &langwell->work);
+ }
+ break;
+ case OTG_STATE_A_WAIT_VRISE:
+ if (langwell->hsm.id) {
+ langwell_otg_del_timer(a_wait_vrise_tmr);
+ langwell->hsm.b_bus_req = 0;
+ langwell->otg.default_a = 0;
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ } else if (langwell->hsm.a_vbus_vld) {
+ langwell_otg_del_timer(a_wait_vrise_tmr);
+ if (langwell->host_ops)
+ langwell->host_ops->probe(langwell->pdev,
+ langwell->host_ops->id_table);
+ else
+ otg_dbg("host driver not loaded.\n");
+ langwell->hsm.b_conn = 0;
+ langwell->hsm.a_set_b_hnp_en = 0;
+ langwell->hsm.a_wait_bcon_tmout = 0;
+ langwell_otg_add_timer(a_wait_bcon_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+ } else if (langwell->hsm.a_wait_vrise_tmout) {
+ if (langwell->hsm.a_vbus_vld) {
+ if (langwell->host_ops)
+ langwell->host_ops->probe(
+ langwell->pdev,
+ langwell->host_ops->id_table);
+ else
+ otg_dbg("host driver not loaded.\n");
+ langwell->hsm.b_conn = 0;
+ langwell->hsm.a_set_b_hnp_en = 0;
+ langwell->hsm.a_wait_bcon_tmout = 0;
+ langwell_otg_add_timer(a_wait_bcon_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+ } else {
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+ }
+ }
+ break;
+ case OTG_STATE_A_WAIT_BCON:
+ if (langwell->hsm.id) {
+ langwell_otg_del_timer(a_wait_bcon_tmr);
+
+ langwell->otg.default_a = 0;
+ langwell->hsm.b_bus_req = 0;
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (!langwell->hsm.a_vbus_vld) {
+ langwell_otg_del_timer(a_wait_bcon_tmr);
+
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+ } else if (langwell->hsm.a_bus_drop ||
+ (langwell->hsm.a_wait_bcon_tmout &&
+ !langwell->hsm.a_bus_req)) {
+ langwell_otg_del_timer(a_wait_bcon_tmr);
+
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ } else if (langwell->hsm.b_conn) {
+ langwell_otg_del_timer(a_wait_bcon_tmr);
+
+ langwell->hsm.a_suspend_req = 0;
+ langwell->otg.state = OTG_STATE_A_HOST;
+ if (!langwell->hsm.a_bus_req &&
+ langwell->hsm.a_set_b_hnp_en) {
+ /* It is not safe enough to do a fast
+ * transistion from A_WAIT_BCON to
+ * A_SUSPEND */
+ msleep(10000);
+ if (langwell->hsm.a_bus_req)
+ break;
+
+ if (request_irq(langwell->pdev->irq,
+ otg_dummy_irq, IRQF_SHARED,
+ driver_name, langwell->regs) != 0) {
+ otg_dbg("request interrupt %d fail\n",
+ langwell->pdev->irq);
+ }
+
+ langwell_otg_HABA(1);
+ langwell->hsm.b_bus_resume = 0;
+ langwell->hsm.a_aidl_bdis_tmout = 0;
+ langwell_otg_add_timer(a_aidl_bdis_tmr);
+
+ langwell_otg_loc_sof(0);
+ langwell->otg.state = OTG_STATE_A_SUSPEND;
+ } else if (!langwell->hsm.a_bus_req &&
+ !langwell->hsm.a_set_b_hnp_en) {
+ struct pci_dev *pdev = langwell->pdev;
+ if (langwell->host_ops)
+ langwell->host_ops->remove(pdev);
+ else
+ otg_dbg("host driver removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ }
+ }
+ break;
+ case OTG_STATE_A_HOST:
+ if (langwell->hsm.id) {
+ langwell->otg.default_a = 0;
+ langwell->hsm.b_bus_req = 0;
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.a_bus_drop ||
+ (!langwell->hsm.a_set_b_hnp_en && !langwell->hsm.a_bus_req)) {
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ } else if (!langwell->hsm.a_vbus_vld) {
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+ } else if (langwell->hsm.a_set_b_hnp_en
+ && !langwell->hsm.a_bus_req) {
+ /* Set HABA to enable hardware assistance to signal
+ * A-connect after receiver B-disconnect. Hardware
+ * will then set client mode and enable URE, SLE and
+ * PCE after the assistance. otg_dummy_irq is used to
+ * clean these ints when client driver is not resumed.
+ */
+ if (request_irq(langwell->pdev->irq,
+ otg_dummy_irq, IRQF_SHARED, driver_name,
+ langwell->regs) != 0) {
+ otg_dbg("request interrupt %d failed\n",
+ langwell->pdev->irq);
+ }
+
+ /* set HABA */
+ langwell_otg_HABA(1);
+ langwell->hsm.b_bus_resume = 0;
+ langwell->hsm.a_aidl_bdis_tmout = 0;
+ langwell_otg_add_timer(a_aidl_bdis_tmr);
+ langwell_otg_loc_sof(0);
+ langwell->otg.state = OTG_STATE_A_SUSPEND;
+ } else if (!langwell->hsm.b_conn || !langwell->hsm.a_bus_req) {
+ langwell->hsm.a_wait_bcon_tmout = 0;
+ langwell->hsm.a_set_b_hnp_en = 0;
+ langwell_otg_add_timer(a_wait_bcon_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+ }
+ break;
+ case OTG_STATE_A_SUSPEND:
+ if (langwell->hsm.id) {
+ langwell_otg_del_timer(a_aidl_bdis_tmr);
+ langwell_otg_HABA(0);
+ free_irq(langwell->pdev->irq, langwell->regs);
+ langwell->otg.default_a = 0;
+ langwell->hsm.b_bus_req = 0;
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.a_bus_req ||
+ langwell->hsm.b_bus_resume) {
+ langwell_otg_del_timer(a_aidl_bdis_tmr);
+ langwell_otg_HABA(0);
+ free_irq(langwell->pdev->irq, langwell->regs);
+ langwell->hsm.a_suspend_req = 0;
+ langwell_otg_loc_sof(1);
+ langwell->otg.state = OTG_STATE_A_HOST;
+ } else if (langwell->hsm.a_aidl_bdis_tmout ||
+ langwell->hsm.a_bus_drop) {
+ langwell_otg_del_timer(a_aidl_bdis_tmr);
+ langwell_otg_HABA(0);
+ free_irq(langwell->pdev->irq, langwell->regs);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ } else if (!langwell->hsm.b_conn &&
+ langwell->hsm.a_set_b_hnp_en) {
+ langwell_otg_del_timer(a_aidl_bdis_tmr);
+ langwell_otg_HABA(0);
+ free_irq(langwell->pdev->irq, langwell->regs);
+
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+
+ langwell->hsm.b_bus_suspend = 0;
+ langwell->hsm.b_bus_suspend_vld = 0;
+ langwell->hsm.b_bus_suspend_tmout = 0;
+
+ /* msleep(200); */
+ if (langwell->client_ops)
+ langwell->client_ops->resume(langwell->pdev);
+ else
+ otg_dbg("client driver not loaded.\n");
+
+ langwell_otg_add_timer(b_bus_suspend_tmr);
+ langwell->otg.state = OTG_STATE_A_PERIPHERAL;
+ break;
+ } else if (!langwell->hsm.a_vbus_vld) {
+ langwell_otg_del_timer(a_aidl_bdis_tmr);
+ langwell_otg_HABA(0);
+ free_irq(langwell->pdev->irq, langwell->regs);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+ }
+ break;
+ case OTG_STATE_A_PERIPHERAL:
+ if (langwell->hsm.id) {
+ langwell_otg_del_timer(b_bus_suspend_tmr);
+ langwell->otg.default_a = 0;
+ langwell->hsm.b_bus_req = 0;
+ if (langwell->client_ops)
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ else
+ otg_dbg("client driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (!langwell->hsm.a_vbus_vld) {
+ langwell_otg_del_timer(b_bus_suspend_tmr);
+ if (langwell->client_ops)
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ else
+ otg_dbg("client driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+ } else if (langwell->hsm.a_bus_drop) {
+ langwell_otg_del_timer(b_bus_suspend_tmr);
+ if (langwell->client_ops)
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ else
+ otg_dbg("client driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ } else if (langwell->hsm.b_bus_suspend) {
+ langwell_otg_del_timer(b_bus_suspend_tmr);
+ if (langwell->client_ops)
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ else
+ otg_dbg("client driver has been removed.\n");
+
+ if (langwell->host_ops)
+ langwell->host_ops->probe(langwell->pdev,
+ langwell->host_ops->id_table);
+ else
+ otg_dbg("host driver not loaded.\n");
+ langwell->hsm.a_set_b_hnp_en = 0;
+ langwell->hsm.a_wait_bcon_tmout = 0;
+ langwell_otg_add_timer(a_wait_bcon_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+ } else if (langwell->hsm.b_bus_suspend_tmout) {
+ u32 val;
+ val = readl(langwell->regs + CI_PORTSC1);
+ if (!(val & PORTSC_SUSP))
+ break;
+ if (langwell->client_ops)
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ else
+ otg_dbg("client driver has been removed.\n");
+ if (langwell->host_ops)
+ langwell->host_ops->probe(langwell->pdev,
+ langwell->host_ops->id_table);
+ else
+ otg_dbg("host driver not loaded.\n");
+ langwell->hsm.a_set_b_hnp_en = 0;
+ langwell->hsm.a_wait_bcon_tmout = 0;
+ langwell_otg_add_timer(a_wait_bcon_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+ }
+ break;
+ case OTG_STATE_A_VBUS_ERR:
+ if (langwell->hsm.id) {
+ langwell->otg.default_a = 0;
+ langwell->hsm.a_clr_err = 0;
+ langwell->hsm.a_srp_det = 0;
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.a_clr_err) {
+ langwell->hsm.a_clr_err = 0;
+ langwell->hsm.a_srp_det = 0;
+ reset_otg();
+ init_hsm();
+ if (langwell->otg.state == OTG_STATE_A_IDLE)
+ queue_work(langwell->qwork, &langwell->work);
+ }
+ break;
+ case OTG_STATE_A_WAIT_VFALL:
+ if (langwell->hsm.id) {
+ langwell->otg.default_a = 0;
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.a_bus_req) {
+ langwell_otg_drv_vbus(1);
+ langwell->hsm.a_wait_vrise_tmout = 0;
+ langwell_otg_add_timer(a_wait_vrise_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
+ } else if (!langwell->hsm.a_sess_vld) {
+ langwell->hsm.a_srp_det = 0;
+ langwell_otg_drv_vbus(0);
+ set_host_mode();
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ }
+ break;
+ default:
+ ;
+ }
+
+ otg_dbg("%s: new state = %s\n", __func__,
+ state_string(langwell->otg.state));
+}
+
+ static ssize_t
+show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
+{
+ struct langwell_otg *langwell;
+ char *next;
+ unsigned size;
+ unsigned t;
+
+ langwell = the_transceiver;
+ next = buf;
+ size = PAGE_SIZE;
+
+ t = scnprintf(next, size,
+ "\n"
+ "USBCMD = 0x%08x \n"
+ "USBSTS = 0x%08x \n"
+ "USBINTR = 0x%08x \n"
+ "ASYNCLISTADDR = 0x%08x \n"
+ "PORTSC1 = 0x%08x \n"
+ "HOSTPC1 = 0x%08x \n"
+ "OTGSC = 0x%08x \n"
+ "USBMODE = 0x%08x \n",
+ readl(langwell->regs + 0x30),
+ readl(langwell->regs + 0x34),
+ readl(langwell->regs + 0x38),
+ readl(langwell->regs + 0x48),
+ readl(langwell->regs + 0x74),
+ readl(langwell->regs + 0xb4),
+ readl(langwell->regs + 0xf4),
+ readl(langwell->regs + 0xf8)
+ );
+ size -= t;
+ next += t;
+
+ return PAGE_SIZE - size;
+}
+static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
+
+static ssize_t
+show_hsm(struct device *_dev, struct device_attribute *attr, char *buf)
+{
+ struct langwell_otg *langwell;
+ char *next;
+ unsigned size;
+ unsigned t;
+
+ langwell = the_transceiver;
+ next = buf;
+ size = PAGE_SIZE;
+
+ t = scnprintf(next, size,
+ "\n"
+ "current state = %s\n"
+ "a_bus_resume = \t%d\n"
+ "a_bus_suspend = \t%d\n"
+ "a_conn = \t%d\n"
+ "a_sess_vld = \t%d\n"
+ "a_srp_det = \t%d\n"
+ "a_vbus_vld = \t%d\n"
+ "b_bus_resume = \t%d\n"
+ "b_bus_suspend = \t%d\n"
+ "b_conn = \t%d\n"
+ "b_se0_srp = \t%d\n"
+ "b_sess_end = \t%d\n"
+ "b_sess_vld = \t%d\n"
+ "id = \t%d\n"
+ "a_set_b_hnp_en = \t%d\n"
+ "b_srp_done = \t%d\n"
+ "b_hnp_enable = \t%d\n"
+ "a_wait_vrise_tmout = \t%d\n"
+ "a_wait_bcon_tmout = \t%d\n"
+ "a_aidl_bdis_tmout = \t%d\n"
+ "b_ase0_brst_tmout = \t%d\n"
+ "a_bus_drop = \t%d\n"
+ "a_bus_req = \t%d\n"
+ "a_clr_err = \t%d\n"
+ "a_suspend_req = \t%d\n"
+ "b_bus_req = \t%d\n"
+ "b_bus_suspend_tmout = \t%d\n"
+ "b_bus_suspend_vld = \t%d\n",
+ state_string(langwell->otg.state),
+ langwell->hsm.a_bus_resume,
+ langwell->hsm.a_bus_suspend,
+ langwell->hsm.a_conn,
+ langwell->hsm.a_sess_vld,
+ langwell->hsm.a_srp_det,
+ langwell->hsm.a_vbus_vld,
+ langwell->hsm.b_bus_resume,
+ langwell->hsm.b_bus_suspend,
+ langwell->hsm.b_conn,
+ langwell->hsm.b_se0_srp,
+ langwell->hsm.b_sess_end,
+ langwell->hsm.b_sess_vld,
+ langwell->hsm.id,
+ langwell->hsm.a_set_b_hnp_en,
+ langwell->hsm.b_srp_done,
+ langwell->hsm.b_hnp_enable,
+ langwell->hsm.a_wait_vrise_tmout,
+ langwell->hsm.a_wait_bcon_tmout,
+ langwell->hsm.a_aidl_bdis_tmout,
+ langwell->hsm.b_ase0_brst_tmout,
+ langwell->hsm.a_bus_drop,
+ langwell->hsm.a_bus_req,
+ langwell->hsm.a_clr_err,
+ langwell->hsm.a_suspend_req,
+ langwell->hsm.b_bus_req,
+ langwell->hsm.b_bus_suspend_tmout,
+ langwell->hsm.b_bus_suspend_vld
+ );
+ size -= t;
+ next += t;
+
+ return PAGE_SIZE - size;
+}
+static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL);
+
+static ssize_t
+get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct langwell_otg *langwell;
+ char *next;
+ unsigned size;
+ unsigned t;
+
+ langwell = the_transceiver;
+ next = buf;
+ size = PAGE_SIZE;
+
+ t = scnprintf(next, size, "%d", langwell->hsm.a_bus_req);
+ size -= t;
+ next += t;
+
+ return PAGE_SIZE - size;
+}
+
+static ssize_t
+set_a_bus_req(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct langwell_otg *langwell;
+ langwell = the_transceiver;
+ if (!langwell->otg.default_a)
+ return -1;
+ if (count > 2)
+ return -1;
+
+ if (buf[0] == '0') {
+ langwell->hsm.a_bus_req = 0;
+ otg_dbg("a_bus_req = 0\n");
+ } else if (buf[0] == '1') {
+ /* If a_bus_drop is TRUE, a_bus_req can't be set */
+ if (langwell->hsm.a_bus_drop)
+ return -1;
+ langwell->hsm.a_bus_req = 1;
+ otg_dbg("a_bus_req = 1\n");
+ }
+ if (spin_trylock(&langwell->wq_lock)) {
+ queue_work(langwell->qwork, &langwell->work);
+ spin_unlock(&langwell->wq_lock);
+ }
+ return count;
+}
+static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
+
+static ssize_t
+get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct langwell_otg *langwell;
+ char *next;
+ unsigned size;
+ unsigned t;
+
+ langwell = the_transceiver;
+ next = buf;
+ size = PAGE_SIZE;
+
+ t = scnprintf(next, size, "%d", langwell->hsm.a_bus_drop);
+ size -= t;
+ next += t;
+
+ return PAGE_SIZE - size;
+}
+
+static ssize_t
+set_a_bus_drop(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct langwell_otg *langwell;
+ langwell = the_transceiver;
+ if (!langwell->otg.default_a)
+ return -1;
+ if (count > 2)
+ return -1;
+
+ if (buf[0] == '0') {
+ langwell->hsm.a_bus_drop = 0;
+ otg_dbg("a_bus_drop = 0\n");
+ } else if (buf[0] == '1') {
+ langwell->hsm.a_bus_drop = 1;
+ langwell->hsm.a_bus_req = 0;
+ otg_dbg("a_bus_drop = 1, then a_bus_req = 0\n");
+ }
+ if (spin_trylock(&langwell->wq_lock)) {
+ queue_work(langwell->qwork, &langwell->work);
+ spin_unlock(&langwell->wq_lock);
+ }
+ return count;
+}
+static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
+ get_a_bus_drop, set_a_bus_drop);
+
+static ssize_t
+get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct langwell_otg *langwell;
+ char *next;
+ unsigned size;
+ unsigned t;
+
+ langwell = the_transceiver;
+ next = buf;
+ size = PAGE_SIZE;
+
+ t = scnprintf(next, size, "%d", langwell->hsm.b_bus_req);
+ size -= t;
+ next += t;
+
+ return PAGE_SIZE - size;
+}
+
+static ssize_t
+set_b_bus_req(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct langwell_otg *langwell;
+ langwell = the_transceiver;
+
+ if (langwell->otg.default_a)
+ return -1;
+
+ if (count > 2)
+ return -1;
+
+ if (buf[0] == '0') {
+ langwell->hsm.b_bus_req = 0;
+ otg_dbg("b_bus_req = 0\n");
+ } else if (buf[0] == '1') {
+ langwell->hsm.b_bus_req = 1;
+ otg_dbg("b_bus_req = 1\n");
+ }
+ if (spin_trylock(&langwell->wq_lock)) {
+ queue_work(langwell->qwork, &langwell->work);
+ spin_unlock(&langwell->wq_lock);
+ }
+ return count;
+}
+static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
+
+static ssize_t
+set_a_clr_err(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct langwell_otg *langwell;
+ langwell = the_transceiver;
+
+ if (!langwell->otg.default_a)
+ return -1;
+ if (count > 2)
+ return -1;
+
+ if (buf[0] == '1') {
+ langwell->hsm.a_clr_err = 1;
+ otg_dbg("a_clr_err = 1\n");
+ }
+ if (spin_trylock(&langwell->wq_lock)) {
+ queue_work(langwell->qwork, &langwell->work);
+ spin_unlock(&langwell->wq_lock);
+ }
+ return count;
+}
+static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
+
+static struct attribute *inputs_attrs[] = {
+ &dev_attr_a_bus_req.attr,
+ &dev_attr_a_bus_drop.attr,
+ &dev_attr_b_bus_req.attr,
+ &dev_attr_a_clr_err.attr,
+ NULL,
+};
+
+static struct attribute_group debug_dev_attr_group = {
+ .name = "inputs",
+ .attrs = inputs_attrs,
+};
+
+int langwell_register_host(struct pci_driver *host_driver)
+{
+ int ret = 0;
+
+ the_transceiver->host_ops = host_driver;
+ queue_work(the_transceiver->qwork, &the_transceiver->work);
+ otg_dbg("host controller driver is registered\n");
+
+ return ret;
+}
+EXPORT_SYMBOL(langwell_register_host);
+
+void langwell_unregister_host(struct pci_driver *host_driver)
+{
+ if (the_transceiver->host_ops)
+ the_transceiver->host_ops->remove(the_transceiver->pdev);
+ the_transceiver->host_ops = NULL;
+ the_transceiver->hsm.a_bus_drop = 1;
+ queue_work(the_transceiver->qwork, &the_transceiver->work);
+ otg_dbg("host controller driver is unregistered\n");
+}
+EXPORT_SYMBOL(langwell_unregister_host);
+
+int langwell_register_peripheral(struct pci_driver *client_driver)
+{
+ int ret = 0;
+
+ if (client_driver)
+ ret = client_driver->probe(the_transceiver->pdev,
+ client_driver->id_table);
+ if (!ret) {
+ the_transceiver->client_ops = client_driver;
+ queue_work(the_transceiver->qwork, &the_transceiver->work);
+ otg_dbg("client controller driver is registered\n");
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(langwell_register_peripheral);
+
+void langwell_unregister_peripheral(struct pci_driver *client_driver)
+{
+ if (the_transceiver->client_ops)
+ the_transceiver->client_ops->remove(the_transceiver->pdev);
+ the_transceiver->client_ops = NULL;
+ the_transceiver->hsm.b_bus_req = 0;
+ queue_work(the_transceiver->qwork, &the_transceiver->work);
+ otg_dbg("client controller driver is unregistered\n");
+}
+EXPORT_SYMBOL(langwell_unregister_peripheral);
+
+static int langwell_otg_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ unsigned long resource, len;
+ void __iomem *base = NULL;
+ int retval;
+ u32 val32;
+ struct langwell_otg *langwell;
+ char qname[] = "langwell_otg_queue";
+
+ retval = 0;
+ otg_dbg("\notg controller is detected.\n");
+ if (pci_enable_device(pdev) < 0) {
+ retval = -ENODEV;
+ goto done;
+ }
+
+ langwell = kzalloc(sizeof *langwell, GFP_KERNEL);
+ if (langwell == NULL) {
+ retval = -ENOMEM;
+ goto done;
+ }
+ the_transceiver = langwell;
+
+ /* control register: BAR 0 */
+ resource = pci_resource_start(pdev, 0);
+ len = pci_resource_len(pdev, 0);
+ if (!request_mem_region(resource, len, driver_name)) {
+ retval = -EBUSY;
+ goto err;
+ }
+ langwell->region = 1;
+
+ base = ioremap_nocache(resource, len);
+ if (base == NULL) {
+ retval = -EFAULT;
+ goto err;
+ }
+ langwell->regs = base;
+
+ if (!pdev->irq) {
+ otg_dbg("No IRQ.\n");
+ retval = -ENODEV;
+ goto err;
+ }
+
+ langwell->qwork = create_workqueue(qname);
+ if (!langwell->qwork) {
+ otg_dbg("cannot create workqueue %s\n", qname);
+ retval = -ENOMEM;
+ goto err;
+ }
+ INIT_WORK(&langwell->work, langwell_otg_work);
+
+ /* OTG common part */
+ langwell->pdev = pdev;
+ langwell->otg.dev = &pdev->dev;
+ langwell->otg.label = driver_name;
+ langwell->otg.set_host = langwell_otg_set_host;
+ langwell->otg.set_peripheral = langwell_otg_set_peripheral;
+ langwell->otg.set_power = langwell_otg_set_power;
+ langwell->otg.start_srp = langwell_otg_start_srp;
+ langwell->otg.state = OTG_STATE_UNDEFINED;
+ if (otg_set_transceiver(&langwell->otg)) {
+ otg_dbg("can't set transceiver\n");
+ retval = -EBUSY;
+ goto err;
+ }
+
+ reset_otg();
+ init_hsm();
+
+ spin_lock_init(&langwell->lock);
+ spin_lock_init(&langwell->wq_lock);
+ INIT_LIST_HEAD(&active_timers);
+ langwell_otg_init_timers(&langwell->hsm);
+
+ if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
+ driver_name, langwell) != 0) {
+ otg_dbg("request interrupt %d failed\n", pdev->irq);
+ retval = -EBUSY;
+ goto err;
+ }
+
+ /* enable OTGSC int */
+ val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE |
+ OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU;
+ writel(val32, langwell->regs + CI_OTGSC);
+
+ retval = device_create_file(&pdev->dev, &dev_attr_registers);
+ if (retval < 0) {
+ otg_dbg("Can't register sysfs attribute: %d\n", retval);
+ goto err;
+ }
+
+ retval = device_create_file(&pdev->dev, &dev_attr_hsm);
+ if (retval < 0) {
+ otg_dbg("Can't hsm sysfs attribute: %d\n", retval);
+ goto err;
+ }
+
+ retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group);
+ if (retval < 0) {
+ otg_dbg("Can't register sysfs attr group: %d\n", retval);
+ goto err;
+ }
+
+ if (langwell->otg.state == OTG_STATE_A_IDLE)
+ queue_work(langwell->qwork, &langwell->work);
+
+ return 0;
+
+err:
+ if (the_transceiver)
+ langwell_otg_remove(pdev);
+done:
+ return retval;
+}
+
+static void langwell_otg_remove(struct pci_dev *pdev)
+{
+ struct langwell_otg *langwell;
+
+ langwell = the_transceiver;
+
+ if (langwell->qwork) {
+ flush_workqueue(langwell->qwork);
+ destroy_workqueue(langwell->qwork);
+ }
+ langwell_otg_free_timers();
+
+ /* disable OTGSC interrupt as OTGSC doesn't change in reset */
+ writel(0, langwell->regs + CI_OTGSC);
+
+ if (pdev->irq)
+ free_irq(pdev->irq, langwell);
+ if (langwell->regs)
+ iounmap(langwell->regs);
+ if (langwell->region)
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+ otg_set_transceiver(NULL);
+ pci_disable_device(pdev);
+ sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group);
+ device_remove_file(&pdev->dev, &dev_attr_hsm);
+ device_remove_file(&pdev->dev, &dev_attr_registers);
+ kfree(langwell);
+ langwell = NULL;
+}
+
+static void transceiver_suspend(struct pci_dev *pdev)
+{
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+ langwell_otg_phy_low_power(1);
+}
+
+static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message)
+{
+ int ret = 0;
+ struct langwell_otg *langwell;
+
+ langwell = the_transceiver;
+
+ /* Disbale OTG interrupts */
+ langwell_otg_intr(0);
+
+ if (pdev->irq)
+ free_irq(pdev->irq, langwell);
+
+ /* Prevent more otg_work */
+ flush_workqueue(langwell->qwork);
+ spin_lock(&langwell->wq_lock);
+
+ /* start actions */
+ switch (langwell->otg.state) {
+ case OTG_STATE_A_IDLE:
+ case OTG_STATE_B_IDLE:
+ case OTG_STATE_A_WAIT_VFALL:
+ case OTG_STATE_A_VBUS_ERR:
+ transceiver_suspend(pdev);
+ break;
+ case OTG_STATE_A_WAIT_VRISE:
+ langwell_otg_del_timer(a_wait_vrise_tmr);
+ langwell->hsm.a_srp_det = 0;
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ transceiver_suspend(pdev);
+ break;
+ case OTG_STATE_A_WAIT_BCON:
+ langwell_otg_del_timer(a_wait_bcon_tmr);
+ if (langwell->host_ops)
+ ret = langwell->host_ops->suspend(pdev, message);
+ langwell_otg_drv_vbus(0);
+ break;
+ case OTG_STATE_A_HOST:
+ if (langwell->host_ops)
+ ret = langwell->host_ops->suspend(pdev, message);
+ langwell_otg_drv_vbus(0);
+ langwell_otg_phy_low_power(1);
+ break;
+ case OTG_STATE_A_SUSPEND:
+ langwell_otg_del_timer(a_aidl_bdis_tmr);
+ langwell_otg_HABA(0);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ transceiver_suspend(pdev);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ break;
+ case OTG_STATE_A_PERIPHERAL:
+ if (langwell->client_ops)
+ ret = langwell->client_ops->suspend(pdev, message);
+ else
+ otg_dbg("client driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ transceiver_suspend(pdev);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ break;
+ case OTG_STATE_B_HOST:
+ if (langwell->host_ops)
+ langwell->host_ops->remove(pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell->hsm.b_bus_req = 0;
+ transceiver_suspend(pdev);
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ if (langwell->client_ops)
+ ret = langwell->client_ops->suspend(pdev, message);
+ else
+ otg_dbg("client driver has been removed.\n");
+ break;
+ case OTG_STATE_B_WAIT_ACON:
+ langwell_otg_del_timer(b_ase0_brst_tmr);
+ langwell_otg_HAAR(0);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell->hsm.b_bus_req = 0;
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ transceiver_suspend(pdev);
+ break;
+ default:
+ otg_dbg("error state before suspend\n ");
+ break;
+ }
+ spin_unlock(&langwell->wq_lock);
+
+ return ret;
+}
+
+static void transceiver_resume(struct pci_dev *pdev)
+{
+ pci_restore_state(pdev);
+ pci_set_power_state(pdev, PCI_D0);
+ langwell_otg_phy_low_power(0);
+}
+
+static int langwell_otg_resume(struct pci_dev *pdev)
+{
+ int ret = 0;
+ struct langwell_otg *langwell;
+
+ langwell = the_transceiver;
+
+ spin_lock(&langwell->wq_lock);
+
+ switch (langwell->otg.state) {
+ case OTG_STATE_A_IDLE:
+ case OTG_STATE_B_IDLE:
+ case OTG_STATE_A_WAIT_VFALL:
+ case OTG_STATE_A_VBUS_ERR:
+ transceiver_resume(pdev);
+ break;
+ case OTG_STATE_A_WAIT_BCON:
+ langwell_otg_add_timer(a_wait_bcon_tmr);
+ langwell_otg_drv_vbus(1);
+ if (langwell->host_ops)
+ ret = langwell->host_ops->resume(pdev);
+ break;
+ case OTG_STATE_A_HOST:
+ langwell_otg_drv_vbus(1);
+ langwell_otg_phy_low_power(0);
+ if (langwell->host_ops)
+ ret = langwell->host_ops->resume(pdev);
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ if (langwell->client_ops)
+ ret = langwell->client_ops->resume(pdev);
+ else
+ otg_dbg("client driver not loaded.\n");
+ break;
+ default:
+ otg_dbg("error state before suspend\n ");
+ break;
+ }
+
+ if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
+ driver_name, the_transceiver) != 0) {
+ otg_dbg("request interrupt %d failed\n", pdev->irq);
+ ret = -EBUSY;
+ }
+
+ /* enable OTG interrupts */
+ langwell_otg_intr(1);
+
+ spin_unlock(&langwell->wq_lock);
+
+ queue_work(langwell->qwork, &langwell->work);
+
+
+ return ret;
+}
+
+static int __init langwell_otg_init(void)
+{
+ return pci_register_driver(&otg_pci_driver);
+}
+module_init(langwell_otg_init);
+
+static void __exit langwell_otg_cleanup(void)
+{
+ pci_unregister_driver(&otg_pci_driver);
+}
+module_exit(langwell_otg_cleanup);
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index c567168..9ed5ea5 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -22,8 +22,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Current status:
- * this is to add "nop" transceiver for all those phy which is
- * autonomous such as isp1504 etc.
+ * This provides a "nop" transceiver for PHYs which are
+ * autonomous such as isp1504, isp1707, etc.
*/
#include <linux/module.h>
@@ -36,30 +36,25 @@
struct device *dev;
};
-static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device nop_xceiv_device = {
- .name = "nop_usb_xceiv",
- .id = -1,
- .dev = {
- .dma_mask = &nop_xceiv_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = NULL,
- },
-};
+static struct platform_device *pd;
void usb_nop_xceiv_register(void)
{
- if (platform_device_register(&nop_xceiv_device) < 0) {
+ if (pd)
+ return;
+ pd = platform_device_register_simple("nop_usb_xceiv", -1, NULL, 0);
+ if (!pd) {
printk(KERN_ERR "Unable to register usb nop transceiver\n");
return;
}
}
+EXPORT_SYMBOL(usb_nop_xceiv_register);
void usb_nop_xceiv_unregister(void)
{
- platform_device_unregister(&nop_xceiv_device);
+ platform_device_unregister(pd);
}
+EXPORT_SYMBOL(usb_nop_xceiv_unregister);
static inline struct nop_usb_xceiv *xceiv_to_nop(struct otg_transceiver *x)
{
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index d9478d0..9e3e7a5 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -217,6 +217,7 @@
/* In module TWL4030_MODULE_PM_MASTER */
#define PROTECT_KEY 0x0E
+#define STS_HW_CONDITIONS 0x0F
/* In module TWL4030_MODULE_PM_RECEIVER */
#define VUSB_DEDICATED1 0x7D
@@ -351,15 +352,26 @@
int status;
int linkstat = USB_LINK_UNKNOWN;
- /* STS_HW_CONDITIONS */
- status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER, 0x0f);
+ /*
+ * For ID/VBUS sensing, see manual section 15.4.8 ...
+ * except when using only battery backup power, two
+ * comparators produce VBUS_PRES and ID_PRES signals,
+ * which don't match docs elsewhere. But ... BIT(7)
+ * and BIT(2) of STS_HW_CONDITIONS, respectively, do
+ * seem to match up. If either is true the USB_PRES
+ * signal is active, the OTG module is activated, and
+ * its interrupt may be raised (may wake the system).
+ */
+ status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER,
+ STS_HW_CONDITIONS);
if (status < 0)
dev_err(twl->dev, "USB link status err %d\n", status);
- else if (status & BIT(7))
- linkstat = USB_LINK_VBUS;
- else if (status & BIT(2))
- linkstat = USB_LINK_ID;
- else
+ else if (status & (BIT(7) | BIT(2))) {
+ if (status & BIT(2))
+ linkstat = USB_LINK_ID;
+ else
+ linkstat = USB_LINK_VBUS;
+ } else
linkstat = USB_LINK_NONE;
dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
@@ -641,7 +653,7 @@
return 0;
}
-static int __init twl4030_usb_probe(struct platform_device *pdev)
+static int __devinit twl4030_usb_probe(struct platform_device *pdev)
{
struct twl4030_usb_data *pdata = pdev->dev.platform_data;
struct twl4030_usb *twl;
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 6d106e7..2cbfab3 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -364,7 +364,7 @@
return 0;
}
-static void aircable_shutdown(struct usb_serial *serial)
+static void aircable_release(struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
@@ -375,7 +375,6 @@
if (priv) {
serial_buf_free(priv->tx_buf);
serial_buf_free(priv->rx_buf);
- usb_set_serial_port_data(port, NULL);
kfree(priv);
}
}
@@ -601,7 +600,7 @@
.num_ports = 1,
.attach = aircable_attach,
.probe = aircable_probe,
- .shutdown = aircable_shutdown,
+ .release = aircable_release,
.write = aircable_write,
.write_room = aircable_write_room,
.write_bulk_callback = aircable_write_bulk_callback,
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 2bfd6dd..7033b03 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -90,7 +90,7 @@
/* function prototypes for a Belkin USB Serial Adapter F5U103 */
static int belkin_sa_startup(struct usb_serial *serial);
-static void belkin_sa_shutdown(struct usb_serial *serial);
+static void belkin_sa_release(struct usb_serial *serial);
static int belkin_sa_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void belkin_sa_close(struct usb_serial_port *port);
@@ -142,7 +142,7 @@
.tiocmget = belkin_sa_tiocmget,
.tiocmset = belkin_sa_tiocmset,
.attach = belkin_sa_startup,
- .shutdown = belkin_sa_shutdown,
+ .release = belkin_sa_release,
};
@@ -197,14 +197,13 @@
}
-static void belkin_sa_shutdown(struct usb_serial *serial)
+static void belkin_sa_release(struct usb_serial *serial)
{
struct belkin_sa_private *priv;
int i;
dbg("%s", __func__);
- /* stop reads and writes on all ports */
for (i = 0; i < serial->num_ports; ++i) {
/* My special items, the standard routines free my urbs */
priv = usb_get_serial_port_data(serial->port[i]);
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 83bbb5b..ba555c5 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -59,23 +59,22 @@
retval = -ENODEV;
goto exit;
}
+ if (port->dev_state != PORT_REGISTERING)
+ goto exit;
driver = port->serial->type;
if (driver->port_probe) {
- if (!try_module_get(driver->driver.owner)) {
- dev_err(dev, "module get failed, exiting\n");
- retval = -EIO;
- goto exit;
- }
retval = driver->port_probe(port);
- module_put(driver->driver.owner);
if (retval)
goto exit;
}
retval = device_create_file(dev, &dev_attr_port_number);
- if (retval)
+ if (retval) {
+ if (driver->port_remove)
+ retval = driver->port_remove(port);
goto exit;
+ }
minor = port->number;
tty_register_device(usb_serial_tty_driver, minor, dev);
@@ -98,19 +97,15 @@
if (!port)
return -ENODEV;
+ if (port->dev_state != PORT_UNREGISTERING)
+ return retval;
+
device_remove_file(&port->dev, &dev_attr_port_number);
driver = port->serial->type;
- if (driver->port_remove) {
- if (!try_module_get(driver->driver.owner)) {
- dev_err(dev, "module get failed, exiting\n");
- retval = -EIO;
- goto exit;
- }
+ if (driver->port_remove)
retval = driver->port_remove(port);
- module_put(driver->driver.owner);
- }
-exit:
+
minor = port->number;
tty_unregister_device(usb_serial_tty_driver, minor);
dev_info(dev, "%s converter now disconnected from ttyUSB%d\n",
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 16a154d..2b9eeda 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -50,7 +50,7 @@
unsigned int, unsigned int);
static void cp210x_break_ctl(struct tty_struct *, int);
static int cp210x_startup(struct usb_serial *);
-static void cp210x_shutdown(struct usb_serial *);
+static void cp210x_disconnect(struct usb_serial *);
static int debug;
@@ -137,7 +137,7 @@
.tiocmget = cp210x_tiocmget,
.tiocmset = cp210x_tiocmset,
.attach = cp210x_startup,
- .shutdown = cp210x_shutdown,
+ .disconnect = cp210x_disconnect,
};
/* Config request types */
@@ -792,7 +792,7 @@
return 0;
}
-static void cp210x_shutdown(struct usb_serial *serial)
+static void cp210x_disconnect(struct usb_serial *serial)
{
int i;
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 933ba91..336523f 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -58,7 +58,8 @@
/* Function prototypes */
static int cyberjack_startup(struct usb_serial *serial);
-static void cyberjack_shutdown(struct usb_serial *serial);
+static void cyberjack_disconnect(struct usb_serial *serial);
+static void cyberjack_release(struct usb_serial *serial);
static int cyberjack_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void cyberjack_close(struct usb_serial_port *port);
@@ -94,7 +95,8 @@
.id_table = id_table,
.num_ports = 1,
.attach = cyberjack_startup,
- .shutdown = cyberjack_shutdown,
+ .disconnect = cyberjack_disconnect,
+ .release = cyberjack_release,
.open = cyberjack_open,
.close = cyberjack_close,
.write = cyberjack_write,
@@ -148,17 +150,25 @@
return 0;
}
-static void cyberjack_shutdown(struct usb_serial *serial)
+static void cyberjack_disconnect(struct usb_serial *serial)
+{
+ int i;
+
+ dbg("%s", __func__);
+
+ for (i = 0; i < serial->num_ports; ++i)
+ usb_kill_urb(serial->port[i]->interrupt_in_urb);
+}
+
+static void cyberjack_release(struct usb_serial *serial)
{
int i;
dbg("%s", __func__);
for (i = 0; i < serial->num_ports; ++i) {
- usb_kill_urb(serial->port[i]->interrupt_in_urb);
/* My special items, the standard routines free my urbs */
kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
}
}
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 669f938..9734085 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -171,7 +171,7 @@
static int cypress_earthmate_startup(struct usb_serial *serial);
static int cypress_hidcom_startup(struct usb_serial *serial);
static int cypress_ca42v2_startup(struct usb_serial *serial);
-static void cypress_shutdown(struct usb_serial *serial);
+static void cypress_release(struct usb_serial *serial);
static int cypress_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void cypress_close(struct usb_serial_port *port);
@@ -215,7 +215,7 @@
.id_table = id_table_earthmate,
.num_ports = 1,
.attach = cypress_earthmate_startup,
- .shutdown = cypress_shutdown,
+ .release = cypress_release,
.open = cypress_open,
.close = cypress_close,
.dtr_rts = cypress_dtr_rts,
@@ -242,7 +242,7 @@
.id_table = id_table_cyphidcomrs232,
.num_ports = 1,
.attach = cypress_hidcom_startup,
- .shutdown = cypress_shutdown,
+ .release = cypress_release,
.open = cypress_open,
.close = cypress_close,
.dtr_rts = cypress_dtr_rts,
@@ -269,7 +269,7 @@
.id_table = id_table_nokiaca42v2,
.num_ports = 1,
.attach = cypress_ca42v2_startup,
- .shutdown = cypress_shutdown,
+ .release = cypress_release,
.open = cypress_open,
.close = cypress_close,
.dtr_rts = cypress_dtr_rts,
@@ -616,7 +616,7 @@
} /* cypress_ca42v2_startup */
-static void cypress_shutdown(struct usb_serial *serial)
+static void cypress_release(struct usb_serial *serial)
{
struct cypress_private *priv;
@@ -629,7 +629,6 @@
if (priv) {
cypress_buf_free(priv->buf);
kfree(priv);
- usb_set_serial_port_data(serial->port[0], NULL);
}
}
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 30f5140..f480809 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -460,7 +460,8 @@
static void digi_dtr_rts(struct usb_serial_port *port, int on);
static int digi_startup_device(struct usb_serial *serial);
static int digi_startup(struct usb_serial *serial);
-static void digi_shutdown(struct usb_serial *serial);
+static void digi_disconnect(struct usb_serial *serial);
+static void digi_release(struct usb_serial *serial);
static void digi_read_bulk_callback(struct urb *urb);
static int digi_read_inb_callback(struct urb *urb);
static int digi_read_oob_callback(struct urb *urb);
@@ -524,7 +525,8 @@
.tiocmget = digi_tiocmget,
.tiocmset = digi_tiocmset,
.attach = digi_startup,
- .shutdown = digi_shutdown,
+ .disconnect = digi_disconnect,
+ .release = digi_release,
};
static struct usb_serial_driver digi_acceleport_4_device = {
@@ -550,7 +552,8 @@
.tiocmget = digi_tiocmget,
.tiocmset = digi_tiocmset,
.attach = digi_startup,
- .shutdown = digi_shutdown,
+ .disconnect = digi_disconnect,
+ .release = digi_release,
};
@@ -1556,16 +1559,23 @@
}
-static void digi_shutdown(struct usb_serial *serial)
+static void digi_disconnect(struct usb_serial *serial)
{
int i;
- dbg("digi_shutdown: TOP, in_interrupt()=%ld", in_interrupt());
+ dbg("digi_disconnect: TOP, in_interrupt()=%ld", in_interrupt());
/* stop reads and writes on all ports */
for (i = 0; i < serial->type->num_ports + 1; i++) {
usb_kill_urb(serial->port[i]->read_urb);
usb_kill_urb(serial->port[i]->write_urb);
}
+}
+
+
+static void digi_release(struct usb_serial *serial)
+{
+ int i;
+ dbg("digi_release: TOP, in_interrupt()=%ld", in_interrupt());
/* free the private data structures for all ports */
/* number of regular ports + 1 for the out-of-band port */
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 2b141cc..80cb347 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -90,7 +90,6 @@
static void empeg_throttle(struct tty_struct *tty);
static void empeg_unthrottle(struct tty_struct *tty);
static int empeg_startup(struct usb_serial *serial);
-static void empeg_shutdown(struct usb_serial *serial);
static void empeg_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios);
static void empeg_write_bulk_callback(struct urb *urb);
@@ -124,7 +123,6 @@
.throttle = empeg_throttle,
.unthrottle = empeg_unthrottle,
.attach = empeg_startup,
- .shutdown = empeg_shutdown,
.set_termios = empeg_set_termios,
.write = empeg_write,
.write_room = empeg_write_room,
@@ -427,12 +425,6 @@
}
-static void empeg_shutdown(struct usb_serial *serial)
-{
- dbg("%s", __func__);
-}
-
-
static void empeg_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 683304d..3dc3768 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -47,7 +47,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.4.3"
+#define DRIVER_VERSION "v1.5.0"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
@@ -82,7 +82,8 @@
int rx_processed;
unsigned long rx_bytes;
- __u16 interface; /* FT2232C port interface (0 for FT232/245) */
+ __u16 interface; /* FT2232C, FT2232H or FT4232H port interface
+ (0 for FT232/245) */
speed_t force_baud; /* if non-zero, force the baud rate to
this value */
@@ -94,6 +95,7 @@
unsigned long tx_bytes;
unsigned long tx_outstanding_bytes;
unsigned long tx_outstanding_urbs;
+ unsigned short max_packet_size;
};
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
@@ -164,6 +166,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
@@ -673,6 +676,7 @@
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -693,12 +697,13 @@
[FT232BM] = "FT232BM",
[FT2232C] = "FT2232C",
[FT232RL] = "FT232RL",
+ [FT2232H] = "FT2232H",
+ [FT4232H] = "FT4232H"
};
/* Constants for read urb and write urb */
#define BUFSZ 512
-#define PKTSZ 64
/* rx_flags */
#define THROTTLED 0x01
@@ -715,7 +720,6 @@
/* function prototypes for a FTDI serial converter */
static int ftdi_sio_probe(struct usb_serial *serial,
const struct usb_device_id *id);
-static void ftdi_shutdown(struct usb_serial *serial);
static int ftdi_sio_port_probe(struct usb_serial_port *port);
static int ftdi_sio_port_remove(struct usb_serial_port *port);
static int ftdi_open(struct tty_struct *tty,
@@ -744,6 +748,8 @@
static unsigned short int ftdi_232am_baud_to_divisor(int baud);
static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
static __u32 ftdi_232bm_baud_to_divisor(int baud);
+static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
+static __u32 ftdi_2232h_baud_to_divisor(int baud);
static struct usb_serial_driver ftdi_sio_device = {
.driver = {
@@ -772,7 +778,6 @@
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
- .shutdown = ftdi_shutdown,
};
@@ -838,6 +843,36 @@
return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
}
+static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
+{
+ static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
+ __u32 divisor;
+ int divisor3;
+
+ /* hi-speed baud rate is 10-bit sampling instead of 16-bit */
+ divisor3 = (base / 10 / baud) * 8;
+
+ divisor = divisor3 >> 3;
+ divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
+ /* Deal with special cases for highest baud rates. */
+ if (divisor == 1)
+ divisor = 0;
+ else if (divisor == 0x4001)
+ divisor = 1;
+ /*
+ * Set this bit to turn off a divide by 2.5 on baud rate generator
+ * This enables baud rates up to 12Mbaud but cannot reach below 1200
+ * baud with this bit set
+ */
+ divisor |= 0x00020000;
+ return divisor;
+}
+
+static __u32 ftdi_2232h_baud_to_divisor(int baud)
+{
+ return ftdi_2232h_baud_base_to_divisor(baud, 120000000);
+}
+
#define set_mctrl(port, set) update_mctrl((port), (set), 0)
#define clear_mctrl(port, clear) update_mctrl((port), 0, (clear))
@@ -996,6 +1031,19 @@
baud = 9600;
}
break;
+ case FT2232H: /* FT2232H chip */
+ case FT4232H: /* FT4232H chip */
+ if ((baud <= 12000000) & (baud >= 1200)) {
+ div_value = ftdi_2232h_baud_to_divisor(baud);
+ } else if (baud < 1200) {
+ div_value = ftdi_232bm_baud_to_divisor(baud);
+ } else {
+ dbg("%s - Baud rate too high!", __func__);
+ div_value = ftdi_232bm_baud_to_divisor(9600);
+ div_okay = 0;
+ baud = 9600;
+ }
+ break;
} /* priv->chip_type */
if (div_okay) {
@@ -1196,14 +1244,29 @@
if (interfaces > 1) {
int inter;
- /* Multiple interfaces. Assume FT2232C. */
- priv->chip_type = FT2232C;
+ /* Multiple interfaces.*/
+ if (version == 0x0800) {
+ priv->chip_type = FT4232H;
+ /* Hi-speed - baud clock runs at 120MHz */
+ priv->baud_base = 120000000 / 2;
+ } else if (version == 0x0700) {
+ priv->chip_type = FT2232H;
+ /* Hi-speed - baud clock runs at 120MHz */
+ priv->baud_base = 120000000 / 2;
+ } else
+ priv->chip_type = FT2232C;
+
/* Determine interface code. */
inter = serial->interface->altsetting->desc.bInterfaceNumber;
- if (inter == 0)
- priv->interface = PIT_SIOA;
- else
- priv->interface = PIT_SIOB;
+ if (inter == 0) {
+ priv->interface = INTERFACE_A;
+ } else if (inter == 1) {
+ priv->interface = INTERFACE_B;
+ } else if (inter == 2) {
+ priv->interface = INTERFACE_C;
+ } else if (inter == 3) {
+ priv->interface = INTERFACE_D;
+ }
/* BM-type devices have a bug where bcdDevice gets set
* to 0x200 when iSerialNumber is 0. */
if (version < 0x500) {
@@ -1231,6 +1294,45 @@
}
+/* Determine the maximum packet size for the device. This depends on the chip
+ * type and the USB host capabilities. The value should be obtained from the
+ * device descriptor as the chip will use the appropriate values for the host.*/
+static void ftdi_set_max_packet_size(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ struct usb_device *udev = serial->dev;
+
+ struct usb_interface *interface = serial->interface;
+ struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
+
+ unsigned num_endpoints;
+ int i = 0;
+
+ num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
+ dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
+
+ /* NOTE: some customers have programmed FT232R/FT245R devices
+ * with an endpoint size of 0 - not good. In this case, we
+ * want to override the endpoint descriptor setting and use a
+ * value of 64 for wMaxPacketSize */
+ for (i = 0; i < num_endpoints; i++) {
+ dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
+ interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
+ ep_desc = &interface->cur_altsetting->endpoint[i].desc;
+ if (ep_desc->wMaxPacketSize == 0) {
+ ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
+ dev_info(&udev->dev, "Overriding wMaxPacketSize on endpoint %d\n", i);
+ }
+ }
+
+ /* set max packet size based on descriptor */
+ priv->max_packet_size = ep_desc->wMaxPacketSize;
+
+ dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
+}
+
+
/*
* ***************************************************************************
* Sysfs Attribute
@@ -1314,7 +1416,9 @@
if ((!retval) &&
(priv->chip_type == FT232BM ||
priv->chip_type == FT2232C ||
- priv->chip_type == FT232RL)) {
+ priv->chip_type == FT232RL ||
+ priv->chip_type == FT2232H ||
+ priv->chip_type == FT4232H)) {
retval = device_create_file(&port->dev,
&dev_attr_latency_timer);
}
@@ -1333,7 +1437,9 @@
device_remove_file(&port->dev, &dev_attr_event_char);
if (priv->chip_type == FT232BM ||
priv->chip_type == FT2232C ||
- priv->chip_type == FT232RL) {
+ priv->chip_type == FT232RL ||
+ priv->chip_type == FT2232H ||
+ priv->chip_type == FT4232H) {
device_remove_file(&port->dev, &dev_attr_latency_timer);
}
}
@@ -1416,6 +1522,7 @@
usb_set_serial_port_data(port, priv);
ftdi_determine_type(port);
+ ftdi_set_max_packet_size(port);
read_latency_timer(port);
create_sysfs_attrs(port);
return 0;
@@ -1485,18 +1592,6 @@
return 0;
}
-/* ftdi_shutdown is called from usbserial:usb_serial_disconnect
- * it is called when the usb device is disconnected
- *
- * usbserial:usb_serial_disconnect
- * calls __serial_close for each open of the port
- * shutdown is called then (ie ftdi_shutdown)
- */
-static void ftdi_shutdown(struct usb_serial *serial)
-{
- dbg("%s", __func__);
-}
-
static void ftdi_sio_priv_release(struct kref *k)
{
struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
@@ -1671,8 +1766,8 @@
if (data_offset > 0) {
/* Original sio needs control bytes too... */
transfer_size += (data_offset *
- ((count + (PKTSZ - 1 - data_offset)) /
- (PKTSZ - data_offset)));
+ ((count + (priv->max_packet_size - 1 - data_offset)) /
+ (priv->max_packet_size - data_offset)));
}
buffer = kmalloc(transfer_size, GFP_ATOMIC);
@@ -1694,7 +1789,7 @@
if (data_offset > 0) {
/* Original sio requires control byte at start of
each packet. */
- int user_pktsz = PKTSZ - data_offset;
+ int user_pktsz = priv->max_packet_size - data_offset;
int todo = count;
unsigned char *first_byte = buffer;
const unsigned char *current_position = buf;
@@ -1775,11 +1870,6 @@
dbg("%s - port %d", __func__, port->number);
- if (status) {
- dbg("nonzero write bulk status received: %d", status);
- return;
- }
-
priv = usb_get_serial_port_data(port);
if (!priv) {
dbg("%s - bad port private data pointer - exiting", __func__);
@@ -1790,13 +1880,18 @@
data_offset = priv->write_offset;
if (data_offset > 0) {
/* Subtract the control bytes */
- countback -= (data_offset * DIV_ROUND_UP(countback, PKTSZ));
+ countback -= (data_offset * DIV_ROUND_UP(countback, priv->max_packet_size));
}
spin_lock_irqsave(&priv->tx_lock, flags);
--priv->tx_outstanding_urbs;
priv->tx_outstanding_bytes -= countback;
spin_unlock_irqrestore(&priv->tx_lock, flags);
+ if (status) {
+ dbg("nonzero write bulk status received: %d", status);
+ return;
+ }
+
usb_serial_port_softint(port);
} /* ftdi_write_bulk_callback */
@@ -1892,7 +1987,7 @@
/* count data bytes, but not status bytes */
countread = urb->actual_length;
- countread -= 2 * DIV_ROUND_UP(countread, PKTSZ);
+ countread -= 2 * DIV_ROUND_UP(countread, priv->max_packet_size);
spin_lock_irqsave(&priv->rx_lock, flags);
priv->rx_bytes += countread;
spin_unlock_irqrestore(&priv->rx_lock, flags);
@@ -1965,7 +2060,7 @@
need_flip = 0;
for (packet_offset = priv->rx_processed;
- packet_offset < urb->actual_length; packet_offset += PKTSZ) {
+ packet_offset < urb->actual_length; packet_offset += priv->max_packet_size) {
int length;
/* Compare new line status to the old one, signal if different/
@@ -1980,7 +2075,7 @@
priv->prev_status = new_status;
}
- length = min_t(u32, PKTSZ, urb->actual_length-packet_offset)-2;
+ length = min_t(u32, priv->max_packet_size, urb->actual_length-packet_offset)-2;
if (length < 0) {
dev_err(&port->dev, "%s - bad packet length: %d\n",
__func__, length+2);
@@ -2011,6 +2106,7 @@
if (data[packet_offset+1] & FTDI_RS_BI) {
error_flag = TTY_BREAK;
dbg("BREAK received");
+ usb_serial_handle_break(port);
}
if (data[packet_offset+1] & FTDI_RS_PE) {
error_flag = TTY_PARITY;
@@ -2025,8 +2121,11 @@
/* Note that the error flag is duplicated for
every character received since we don't know
which character it applied to */
- tty_insert_flip_char(tty,
- data[packet_offset + i], error_flag);
+ if (!usb_serial_handle_sysrq_char(port,
+ data[packet_offset + i]))
+ tty_insert_flip_char(tty,
+ data[packet_offset + i],
+ error_flag);
}
need_flip = 1;
}
@@ -2332,6 +2431,8 @@
case FT232BM:
case FT2232C:
case FT232RL:
+ case FT2232H:
+ case FT4232H:
/* the 8U232AM returns a two byte value (the sio is a 1 byte
value) - in the same format as the data returned from the in
point */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 12330fa..f1d440a 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -10,7 +10,7 @@
* The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side,
* USB on the other.
*
- * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details
+ * Thanx to FTDI (http://www.ftdichip.com) for so kindly providing details
* of the protocol required to talk to the device and ongoing assistence
* during development.
*
@@ -28,11 +28,15 @@
#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
+#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */
+/* Larsen and Brusgaard AltiTrack/USBtrack */
+#define LARSENBRUSGAARD_VID 0x0FD8
+#define LB_ALTITRACK_PID 0x0001
/* www.canusb.com Lawicel CANUSB device */
#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
@@ -873,6 +877,11 @@
#define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */
#define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */
+/* Interface indicies for FT2232, FT2232H and FT4232H devices*/
+#define INTERFACE_A 1
+#define INTERFACE_B 2
+#define INTERFACE_C 3
+#define INTERFACE_D 4
/*
* FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
@@ -1036,6 +1045,8 @@
FT232BM = 3,
FT2232C = 4,
FT232RL = 5,
+ FT2232H = 6,
+ FT4232H = 7
} ftdi_chip_type_t;
typedef enum {
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index ee25a3f..8839f1c 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1,7 +1,7 @@
/*
* Garmin GPS driver
*
- * Copyright (C) 2006,2007 Hermann Kneissel herkne@users.sourceforge.net
+ * Copyright (C) 2006-2009 Hermann Kneissel herkne@users.sourceforge.net
*
* The latest version of the driver can be found at
* http://sourceforge.net/projects/garmin-gps/
@@ -51,7 +51,7 @@
*/
#define VERSION_MAJOR 0
-#define VERSION_MINOR 31
+#define VERSION_MINOR 33
#define _STR(s) #s
#define _DRIVER_VERSION(a, b) "v" _STR(a) "." _STR(b)
@@ -129,7 +129,6 @@
__u8 state;
__u16 flags;
__u8 mode;
- __u8 ignorePkts;
__u8 count;
__u8 pkt_id;
__u32 serial_num;
@@ -141,8 +140,6 @@
__u8 inbuffer [GPS_IN_BUFSIZ]; /* tty -> usb */
__u8 outbuffer[GPS_OUT_BUFSIZ]; /* usb -> tty */
__u8 privpkt[4*6];
- atomic_t req_count;
- atomic_t resp_count;
spinlock_t lock;
struct list_head pktlist;
};
@@ -170,6 +167,8 @@
#define FLAGS_BULK_IN_ACTIVE 0x0020
#define FLAGS_BULK_IN_RESTART 0x0010
#define FLAGS_THROTTLED 0x0008
+#define APP_REQ_SEEN 0x0004
+#define APP_RESP_SEEN 0x0002
#define CLEAR_HALT_REQUIRED 0x0001
#define FLAGS_QUEUING 0x0100
@@ -184,20 +183,16 @@
/* function prototypes */
-static void gsp_next_packet(struct garmin_data *garmin_data_p);
-static int garmin_write_bulk(struct usb_serial_port *port,
+static int gsp_next_packet(struct garmin_data *garmin_data_p);
+static int garmin_write_bulk(struct usb_serial_port *port,
const unsigned char *buf, int count,
int dismiss_ack);
/* some special packets to be send or received */
static unsigned char const GARMIN_START_SESSION_REQ[]
= { 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0 };
-static unsigned char const GARMIN_START_SESSION_REQ2[]
- = { 0, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
static unsigned char const GARMIN_START_SESSION_REPLY[]
= { 0, 0, 0, 0, 6, 0, 0, 0, 4, 0, 0, 0 };
-static unsigned char const GARMIN_SESSION_ACTIVE_REPLY[]
- = { 0, 0, 0, 0, 17, 0, 0, 0, 4, 0, 0, 0, 0, 16, 0, 0 };
static unsigned char const GARMIN_BULK_IN_AVAIL_REPLY[]
= { 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 };
static unsigned char const GARMIN_APP_LAYER_REPLY[]
@@ -233,13 +228,6 @@
};
-static inline int noResponseFromAppLayer(struct garmin_data *garmin_data_p)
-{
- return atomic_read(&garmin_data_p->req_count) ==
- atomic_read(&garmin_data_p->resp_count);
-}
-
-
static inline int getLayerId(const __u8 *usbPacket)
{
return __le32_to_cpup((__le32 *)(usbPacket));
@@ -325,8 +313,11 @@
state = garmin_data_p->state;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+ dbg("%s - added: pkt: %d - %d bytes",
+ __func__, pkt->seq, data_length);
+
/* in serial mode, if someone is waiting for data from
- the device, iconvert and send the next packet to tty. */
+ the device, convert and send the next packet to tty. */
if (result && (state == STATE_GSP_WAIT_DATA))
gsp_next_packet(garmin_data_p);
}
@@ -411,7 +402,7 @@
/*
* called for a complete packet received from tty layer
*
- * the complete packet (pkzid ... cksum) is in garmin_data_p->inbuf starting
+ * the complete packet (pktid ... cksum) is in garmin_data_p->inbuf starting
* at GSP_INITIAL_OFFSET.
*
* count - number of bytes in the input buffer including space reserved for
@@ -501,7 +492,6 @@
unsigned long flags;
int offs = 0;
int ack_or_nak_seen = 0;
- int i = 0;
__u8 *dest;
int size;
/* dleSeen: set if last byte read was a DLE */
@@ -519,8 +509,8 @@
skip = garmin_data_p->flags & FLAGS_GSP_SKIP;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
- dbg("%s - dle=%d skip=%d size=%d count=%d",
- __func__, dleSeen, skip, size, count);
+ /* dbg("%s - dle=%d skip=%d size=%d count=%d",
+ __func__, dleSeen, skip, size, count); */
if (size == 0)
size = GSP_INITIAL_OFFSET;
@@ -568,7 +558,6 @@
} else if (!skip) {
if (dleSeen) {
- dbg("non-masked DLE at %d - restarting", i);
size = GSP_INITIAL_OFFSET;
dleSeen = 0;
}
@@ -599,19 +588,19 @@
else
garmin_data_p->flags &= ~FLAGS_GSP_DLESEEN;
- if (ack_or_nak_seen)
- garmin_data_p->state = STATE_GSP_WAIT_DATA;
-
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
- if (ack_or_nak_seen)
- gsp_next_packet(garmin_data_p);
+ if (ack_or_nak_seen) {
+ if (gsp_next_packet(garmin_data_p) > 0)
+ garmin_data_p->state = STATE_ACTIVE;
+ else
+ garmin_data_p->state = STATE_GSP_WAIT_DATA;
+ }
return count;
}
-
/*
* Sends a usb packet to the tty
*
@@ -733,29 +722,28 @@
}
-
-
-
/*
* Process the next pending data packet - if there is one
*/
-static void gsp_next_packet(struct garmin_data *garmin_data_p)
+static int gsp_next_packet(struct garmin_data *garmin_data_p)
{
+ int result = 0;
struct garmin_packet *pkt = NULL;
while ((pkt = pkt_pop(garmin_data_p)) != NULL) {
dbg("%s - next pkt: %d", __func__, pkt->seq);
- if (gsp_send(garmin_data_p, pkt->data, pkt->size) > 0) {
+ result = gsp_send(garmin_data_p, pkt->data, pkt->size);
+ if (result > 0) {
kfree(pkt);
- return;
+ return result;
}
kfree(pkt);
}
+ return result;
}
-
/******************************************************************************
* garmin native mode
******************************************************************************/
@@ -888,14 +876,6 @@
unsigned long flags;
int status = 0;
- struct usb_serial_port *port = garmin_data_p->port;
-
- if (port != NULL && atomic_read(&garmin_data_p->resp_count)) {
- /* send a terminate command */
- status = garmin_write_bulk(port, GARMIN_STOP_TRANSFER_REQ,
- sizeof(GARMIN_STOP_TRANSFER_REQ), 1);
- }
-
/* flush all queued data */
pkt_clear(garmin_data_p);
@@ -908,16 +888,12 @@
}
-
-
-
-
static int garmin_init_session(struct usb_serial_port *port)
{
- unsigned long flags;
struct usb_serial *serial = port->serial;
struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
int status = 0;
+ int i = 0;
if (status == 0) {
usb_kill_urb(port->interrupt_in_urb);
@@ -931,30 +907,25 @@
__func__, status);
}
+ /*
+ * using the initialization method from gpsbabel. See comments in
+ * gpsbabel/jeeps/gpslibusb.c gusb_reset_toggles()
+ */
if (status == 0) {
dbg("%s - starting session ...", __func__);
garmin_data_p->state = STATE_ACTIVE;
- status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ,
+
+ for (i = 0; i < 3; i++) {
+ status = garmin_write_bulk(port,
+ GARMIN_START_SESSION_REQ,
sizeof(GARMIN_START_SESSION_REQ), 0);
- if (status >= 0) {
-
- spin_lock_irqsave(&garmin_data_p->lock, flags);
- garmin_data_p->ignorePkts++;
- spin_unlock_irqrestore(&garmin_data_p->lock, flags);
-
- /* not needed, but the win32 driver does it too ... */
- status = garmin_write_bulk(port,
- GARMIN_START_SESSION_REQ2,
- sizeof(GARMIN_START_SESSION_REQ2), 0);
- if (status >= 0) {
- status = 0;
- spin_lock_irqsave(&garmin_data_p->lock, flags);
- garmin_data_p->ignorePkts++;
- spin_unlock_irqrestore(&garmin_data_p->lock,
- flags);
- }
+ if (status < 0)
+ break;
}
+
+ if (status > 0)
+ status = 0;
}
return status;
@@ -962,8 +933,6 @@
-
-
static int garmin_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
{
@@ -977,8 +946,6 @@
garmin_data_p->mode = initial_mode;
garmin_data_p->count = 0;
garmin_data_p->flags = 0;
- atomic_set(&garmin_data_p->req_count, 0);
- atomic_set(&garmin_data_p->resp_count, 0);
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
/* shutdown any bulk reads that might be going on */
@@ -1006,6 +973,7 @@
return;
mutex_lock(&port->serial->disc_mutex);
+
if (!port->serial->disconnected)
garmin_clear(garmin_data_p);
@@ -1013,25 +981,17 @@
usb_kill_urb(port->read_urb);
usb_kill_urb(port->write_urb);
- if (!port->serial->disconnected) {
- if (noResponseFromAppLayer(garmin_data_p) ||
- ((garmin_data_p->flags & CLEAR_HALT_REQUIRED) != 0)) {
- process_resetdev_request(port);
- garmin_data_p->state = STATE_RESET;
- } else {
- garmin_data_p->state = STATE_DISCONNECTED;
- }
- } else {
+ /* keep reset state so we know that we must start a new session */
+ if (garmin_data_p->state != STATE_RESET)
garmin_data_p->state = STATE_DISCONNECTED;
- }
+
mutex_unlock(&port->serial->disc_mutex);
}
+
static void garmin_write_bulk_callback(struct urb *urb)
{
- unsigned long flags;
struct usb_serial_port *port = urb->context;
- int status = urb->status;
if (port) {
struct garmin_data *garmin_data_p =
@@ -1039,20 +999,13 @@
dbg("%s - port %d", __func__, port->number);
- if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)
- && (garmin_data_p->mode == MODE_GARMIN_SERIAL)) {
- gsp_send_ack(garmin_data_p,
+ if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)) {
+
+ if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
+ gsp_send_ack(garmin_data_p,
((__u8 *)urb->transfer_buffer)[4]);
+ }
}
-
- if (status) {
- dbg("%s - nonzero write bulk status received: %d",
- __func__, status);
- spin_lock_irqsave(&garmin_data_p->lock, flags);
- garmin_data_p->flags |= CLEAR_HALT_REQUIRED;
- spin_unlock_irqrestore(&garmin_data_p->lock, flags);
- }
-
usb_serial_port_softint(port);
}
@@ -1108,7 +1061,11 @@
urb->transfer_flags |= URB_ZERO_PACKET;
if (GARMIN_LAYERID_APPL == getLayerId(buffer)) {
- atomic_inc(&garmin_data_p->req_count);
+
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
+ garmin_data_p->flags |= APP_REQ_SEEN;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
pkt_clear(garmin_data_p);
garmin_data_p->state = STATE_GSP_WAIT_DATA;
@@ -1140,6 +1097,9 @@
usb_serial_debug_data(debug, &port->dev, __func__, count, buf);
+ if (garmin_data_p->state == STATE_RESET)
+ return -EIO;
+
/* check for our private packets */
if (count >= GARMIN_PKTHDR_LENGTH) {
len = PRIVPKTSIZ;
@@ -1184,7 +1144,7 @@
break;
case PRIV_PKTID_RESET_REQ:
- atomic_inc(&garmin_data_p->req_count);
+ process_resetdev_request(port);
break;
case PRIV_PKTID_SET_DEF_MODE:
@@ -1200,8 +1160,6 @@
}
}
- garmin_data_p->ignorePkts = 0;
-
if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
return gsp_receive(garmin_data_p, buf, count);
} else { /* MODE_NATIVE */
@@ -1224,31 +1182,33 @@
static void garmin_read_process(struct garmin_data *garmin_data_p,
unsigned char *data, unsigned data_length)
{
+ unsigned long flags;
+
if (garmin_data_p->flags & FLAGS_DROP_DATA) {
/* abort-transfer cmd is actice */
dbg("%s - pkt dropped", __func__);
} else if (garmin_data_p->state != STATE_DISCONNECTED &&
garmin_data_p->state != STATE_RESET) {
- /* remember any appl.layer packets, so we know
- if a reset is required or not when closing
- the device */
- if (0 == memcmp(data, GARMIN_APP_LAYER_REPLY,
- sizeof(GARMIN_APP_LAYER_REPLY))) {
- atomic_inc(&garmin_data_p->resp_count);
- }
-
/* if throttling is active or postprecessing is required
put the received data in the input queue, otherwise
send it directly to the tty port */
if (garmin_data_p->flags & FLAGS_QUEUING) {
pkt_add(garmin_data_p, data, data_length);
- } else if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
- if (getLayerId(data) == GARMIN_LAYERID_APPL)
+ } else if (getLayerId(data) == GARMIN_LAYERID_APPL) {
+
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
+ garmin_data_p->flags |= APP_RESP_SEEN;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+ if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
pkt_add(garmin_data_p, data, data_length);
- } else {
- send_to_tty(garmin_data_p->port, data, data_length);
+ } else {
+ send_to_tty(garmin_data_p->port, data,
+ data_length);
+ }
}
+ /* ignore system layer packets ... */
}
}
@@ -1363,8 +1323,6 @@
} else {
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= FLAGS_BULK_IN_ACTIVE;
- /* do not send this packet to the user */
- garmin_data_p->ignorePkts = 1;
spin_unlock_irqrestore(&garmin_data_p->lock,
flags);
}
@@ -1391,17 +1349,7 @@
__func__, garmin_data_p->serial_num);
}
- if (garmin_data_p->ignorePkts) {
- /* this reply belongs to a request generated by the driver,
- ignore it. */
- dbg("%s - pkt ignored (%d)",
- __func__, garmin_data_p->ignorePkts);
- spin_lock_irqsave(&garmin_data_p->lock, flags);
- garmin_data_p->ignorePkts--;
- spin_unlock_irqrestore(&garmin_data_p->lock, flags);
- } else {
- garmin_read_process(garmin_data_p, data, urb->actual_length);
- }
+ garmin_read_process(garmin_data_p, data, urb->actual_length);
port->interrupt_in_urb->dev = port->serial->dev;
retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -1527,7 +1475,7 @@
}
-static void garmin_shutdown(struct usb_serial *serial)
+static void garmin_disconnect(struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
@@ -1536,8 +1484,17 @@
usb_kill_urb(port->interrupt_in_urb);
del_timer_sync(&garmin_data_p->timer);
+}
+
+
+static void garmin_release(struct usb_serial *serial)
+{
+ struct usb_serial_port *port = serial->port[0];
+ struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+
+ dbg("%s", __func__);
+
kfree(garmin_data_p);
- usb_set_serial_port_data(port, NULL);
}
@@ -1556,7 +1513,8 @@
.throttle = garmin_throttle,
.unthrottle = garmin_unthrottle,
.attach = garmin_attach,
- .shutdown = garmin_shutdown,
+ .disconnect = garmin_disconnect,
+ .release = garmin_release,
.write = garmin_write,
.write_room = garmin_write_room,
.write_bulk_callback = garmin_write_bulk_callback,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index be82ea9..932d624 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -63,7 +63,8 @@
.id_table = generic_device_ids,
.usb_driver = &generic_driver,
.num_ports = 1,
- .shutdown = usb_serial_generic_shutdown,
+ .disconnect = usb_serial_generic_disconnect,
+ .release = usb_serial_generic_release,
.throttle = usb_serial_generic_throttle,
.unthrottle = usb_serial_generic_unthrottle,
.resume = usb_serial_generic_resume,
@@ -190,6 +191,88 @@
generic_cleanup(port);
}
+static int usb_serial_multi_urb_write(struct tty_struct *tty,
+ struct usb_serial_port *port, const unsigned char *buf, int count)
+{
+ unsigned long flags;
+ struct urb *urb;
+ unsigned char *buffer;
+ int status;
+ int towrite;
+ int bwrite = 0;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ if (count == 0)
+ dbg("%s - write request of 0 bytes", __func__);
+
+ while (count > 0) {
+ towrite = (count > port->bulk_out_size) ?
+ port->bulk_out_size : count;
+ spin_lock_irqsave(&port->lock, flags);
+ if (port->urbs_in_flight >
+ port->serial->type->max_in_flight_urbs) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ dbg("%s - write limit hit\n", __func__);
+ return bwrite;
+ }
+ port->tx_bytes_flight += towrite;
+ port->urbs_in_flight++;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ buffer = kmalloc(towrite, GFP_ATOMIC);
+ if (!buffer) {
+ dev_err(&port->dev,
+ "%s ran out of kernel memory for urb ...\n", __func__);
+ goto error_no_buffer;
+ }
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ dev_err(&port->dev, "%s - no more free urbs\n",
+ __func__);
+ goto error_no_urb;
+ }
+
+ /* Copy data */
+ memcpy(buffer, buf + bwrite, towrite);
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ towrite, buffer);
+ /* fill the buffer and send it */
+ usb_fill_bulk_urb(urb, port->serial->dev,
+ usb_sndbulkpipe(port->serial->dev,
+ port->bulk_out_endpointAddress),
+ buffer, towrite,
+ usb_serial_generic_write_bulk_callback, port);
+
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status) {
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, status);
+ goto error;
+ }
+
+ /* This urb is the responsibility of the host driver now */
+ usb_free_urb(urb);
+ dbg("%s write: %d", __func__, towrite);
+ count -= towrite;
+ bwrite += towrite;
+ }
+ return bwrite;
+
+error:
+ usb_free_urb(urb);
+error_no_urb:
+ kfree(buffer);
+error_no_buffer:
+ spin_lock_irqsave(&port->lock, flags);
+ port->urbs_in_flight--;
+ port->tx_bytes_flight -= towrite;
+ spin_unlock_irqrestore(&port->lock, flags);
+ return bwrite;
+}
+
int usb_serial_generic_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count)
{
@@ -207,6 +290,11 @@
/* only do something if we have a bulk out endpoint */
if (serial->num_bulk_out) {
unsigned long flags;
+
+ if (serial->type->max_in_flight_urbs)
+ return usb_serial_multi_urb_write(tty, port,
+ buf, count);
+
spin_lock_irqsave(&port->lock, flags);
if (port->write_urb_busy) {
spin_unlock_irqrestore(&port->lock, flags);
@@ -252,20 +340,26 @@
/* no bulk out, so return 0 bytes written */
return 0;
}
+EXPORT_SYMBOL_GPL(usb_serial_generic_write);
int usb_serial_generic_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
+ unsigned long flags;
int room = 0;
dbg("%s - port %d", __func__, port->number);
-
- /* FIXME: Locking */
- if (serial->num_bulk_out) {
- if (!(port->write_urb_busy))
- room = port->bulk_out_size;
+ spin_lock_irqsave(&port->lock, flags);
+ if (serial->type->max_in_flight_urbs) {
+ if (port->urbs_in_flight < serial->type->max_in_flight_urbs)
+ room = port->bulk_out_size *
+ (serial->type->max_in_flight_urbs -
+ port->urbs_in_flight);
+ } else if (serial->num_bulk_out && !(port->write_urb_busy)) {
+ room = port->bulk_out_size;
}
+ spin_unlock_irqrestore(&port->lock, flags);
dbg("%s - returns %d", __func__, room);
return room;
@@ -276,11 +370,16 @@
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
int chars = 0;
+ unsigned long flags;
dbg("%s - port %d", __func__, port->number);
- /* FIXME: Locking */
- if (serial->num_bulk_out) {
+ if (serial->type->max_in_flight_urbs) {
+ spin_lock_irqsave(&port->lock, flags);
+ chars = port->tx_bytes_flight;
+ spin_unlock_irqrestore(&port->lock, flags);
+ } else if (serial->num_bulk_out) {
+ /* FIXME: Locking */
if (port->write_urb_busy)
chars = port->write_urb->transfer_buffer_length;
}
@@ -290,7 +389,8 @@
}
-static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
+void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
+ gfp_t mem_flags)
{
struct urb *urb = port->read_urb;
struct usb_serial *serial = port->serial;
@@ -311,25 +411,28 @@
"%s - failed resubmitting read urb, error %d\n",
__func__, result);
}
+EXPORT_SYMBOL_GPL(usb_serial_generic_resubmit_read_urb);
/* Push data to tty layer and resubmit the bulk read URB */
static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
{
struct urb *urb = port->read_urb;
struct tty_struct *tty = tty_port_tty_get(&port->port);
- int room;
+ char *ch = (char *)urb->transfer_buffer;
+ int i;
+
+ if (!tty)
+ goto done;
/* Push data to tty */
- if (tty && urb->actual_length) {
- room = tty_buffer_request_room(tty, urb->actual_length);
- if (room) {
- tty_insert_flip_string(tty, urb->transfer_buffer, room);
- tty_flip_buffer_push(tty);
- }
+ for (i = 0; i < urb->actual_length; i++, ch++) {
+ if (!usb_serial_handle_sysrq_char(port, *ch))
+ tty_insert_flip_char(tty, *ch, TTY_NORMAL);
}
+ tty_flip_buffer_push(tty);
tty_kref_put(tty);
-
- resubmit_read_urb(port, GFP_ATOMIC);
+done:
+ usb_serial_generic_resubmit_read_urb(port, GFP_ATOMIC);
}
void usb_serial_generic_read_bulk_callback(struct urb *urb)
@@ -363,12 +466,24 @@
void usb_serial_generic_write_bulk_callback(struct urb *urb)
{
+ unsigned long flags;
struct usb_serial_port *port = urb->context;
int status = urb->status;
dbg("%s - port %d", __func__, port->number);
- port->write_urb_busy = 0;
+ if (port->serial->type->max_in_flight_urbs) {
+ spin_lock_irqsave(&port->lock, flags);
+ --port->urbs_in_flight;
+ port->tx_bytes_flight -= urb->transfer_buffer_length;
+ if (port->urbs_in_flight < 0)
+ port->urbs_in_flight = 0;
+ spin_unlock_irqrestore(&port->lock, flags);
+ } else {
+ /* Handle the case for single urb mode */
+ port->write_urb_busy = 0;
+ }
+
if (status) {
dbg("%s - nonzero write bulk status received: %d",
__func__, status);
@@ -408,11 +523,36 @@
if (was_throttled) {
/* Resume reading from device */
- resubmit_read_urb(port, GFP_KERNEL);
+ usb_serial_generic_resubmit_read_urb(port, GFP_KERNEL);
}
}
-void usb_serial_generic_shutdown(struct usb_serial *serial)
+int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch)
+{
+ if (port->sysrq && port->console) {
+ if (ch && time_before(jiffies, port->sysrq)) {
+ handle_sysrq(ch, tty_port_tty_get(&port->port));
+ port->sysrq = 0;
+ return 1;
+ }
+ port->sysrq = 0;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_serial_handle_sysrq_char);
+
+int usb_serial_handle_break(struct usb_serial_port *port)
+{
+ if (!port->sysrq) {
+ port->sysrq = jiffies + HZ*5;
+ return 1;
+ }
+ port->sysrq = 0;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_serial_handle_break);
+
+void usb_serial_generic_disconnect(struct usb_serial *serial)
{
int i;
@@ -423,3 +563,7 @@
generic_cleanup(serial->port[i]);
}
+void usb_serial_generic_release(struct usb_serial *serial)
+{
+ dbg("%s", __func__);
+}
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 53ef599..0191693 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -224,7 +224,8 @@
static int edge_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int edge_startup(struct usb_serial *serial);
-static void edge_shutdown(struct usb_serial *serial);
+static void edge_disconnect(struct usb_serial *serial);
+static void edge_release(struct usb_serial *serial);
#include "io_tables.h" /* all of the devices that this driver supports */
@@ -3193,21 +3194,16 @@
/****************************************************************************
- * edge_shutdown
+ * edge_disconnect
* This function is called whenever the device is removed from the usb bus.
****************************************************************************/
-static void edge_shutdown(struct usb_serial *serial)
+static void edge_disconnect(struct usb_serial *serial)
{
struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
- int i;
dbg("%s", __func__);
/* stop reads and writes on all ports */
- for (i = 0; i < serial->num_ports; ++i) {
- kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
- }
/* free up our endpoint stuff */
if (edge_serial->is_epic) {
usb_kill_urb(edge_serial->interrupt_read_urb);
@@ -3218,9 +3214,24 @@
usb_free_urb(edge_serial->read_urb);
kfree(edge_serial->bulk_in_buffer);
}
+}
+
+
+/****************************************************************************
+ * edge_release
+ * This function is called when the device structure is deallocated.
+ ****************************************************************************/
+static void edge_release(struct usb_serial *serial)
+{
+ struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+ int i;
+
+ dbg("%s", __func__);
+
+ for (i = 0; i < serial->num_ports; ++i)
+ kfree(usb_get_serial_port_data(serial->port[i]));
kfree(edge_serial);
- usb_set_serial_data(serial, NULL);
}
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 7eb9d67..9241d31 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -117,7 +117,8 @@
.throttle = edge_throttle,
.unthrottle = edge_unthrottle,
.attach = edge_startup,
- .shutdown = edge_shutdown,
+ .disconnect = edge_disconnect,
+ .release = edge_release,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
@@ -145,7 +146,8 @@
.throttle = edge_throttle,
.unthrottle = edge_unthrottle,
.attach = edge_startup,
- .shutdown = edge_shutdown,
+ .disconnect = edge_disconnect,
+ .release = edge_release,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
@@ -173,7 +175,8 @@
.throttle = edge_throttle,
.unthrottle = edge_unthrottle,
.attach = edge_startup,
- .shutdown = edge_shutdown,
+ .disconnect = edge_disconnect,
+ .release = edge_release,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
@@ -200,7 +203,8 @@
.throttle = edge_throttle,
.unthrottle = edge_unthrottle,
.attach = edge_startup,
- .shutdown = edge_shutdown,
+ .disconnect = edge_disconnect,
+ .release = edge_release,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index db964db..e8bc42f 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2663,7 +2663,7 @@
return -ENOMEM;
}
-static void edge_shutdown(struct usb_serial *serial)
+static void edge_disconnect(struct usb_serial *serial)
{
int i;
struct edgeport_port *edge_port;
@@ -2673,12 +2673,22 @@
for (i = 0; i < serial->num_ports; ++i) {
edge_port = usb_get_serial_port_data(serial->port[i]);
edge_remove_sysfs_attrs(edge_port->port);
+ }
+}
+
+static void edge_release(struct usb_serial *serial)
+{
+ int i;
+ struct edgeport_port *edge_port;
+
+ dbg("%s", __func__);
+
+ for (i = 0; i < serial->num_ports; ++i) {
+ edge_port = usb_get_serial_port_data(serial->port[i]);
edge_buf_free(edge_port->ep_out_buf);
kfree(edge_port);
- usb_set_serial_port_data(serial->port[i], NULL);
}
kfree(usb_get_serial_data(serial));
- usb_set_serial_data(serial, NULL);
}
@@ -2915,7 +2925,8 @@
.throttle = edge_throttle,
.unthrottle = edge_unthrottle,
.attach = edge_startup,
- .shutdown = edge_shutdown,
+ .disconnect = edge_disconnect,
+ .release = edge_release,
.port_probe = edge_create_sysfs_attrs,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
@@ -2944,7 +2955,8 @@
.throttle = edge_throttle,
.unthrottle = edge_unthrottle,
.attach = edge_startup,
- .shutdown = edge_shutdown,
+ .disconnect = edge_disconnect,
+ .release = edge_release,
.port_probe = edge_create_sysfs_attrs,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index c610a99..2545d45 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -79,7 +79,6 @@
static void ipaq_close(struct usb_serial_port *port);
static int ipaq_calc_num_ports(struct usb_serial *serial);
static int ipaq_startup(struct usb_serial *serial);
-static void ipaq_shutdown(struct usb_serial *serial);
static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int ipaq_write_bulk(struct usb_serial_port *port,
@@ -576,7 +575,6 @@
.close = ipaq_close,
.attach = ipaq_startup,
.calc_num_ports = ipaq_calc_num_ports,
- .shutdown = ipaq_shutdown,
.write = ipaq_write,
.write_room = ipaq_write_room,
.chars_in_buffer = ipaq_chars_in_buffer,
@@ -990,11 +988,6 @@
return usb_reset_configuration(serial->dev);
}
-static void ipaq_shutdown(struct usb_serial *serial)
-{
- dbg("%s", __func__);
-}
-
static int __init ipaq_init(void)
{
int retval;
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 76a3cc3..96873a7 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -121,8 +121,8 @@
return 0;
}
-/* Shutdown function */
-static void iuu_shutdown(struct usb_serial *serial)
+/* Release function */
+static void iuu_release(struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
struct iuu_private *priv = usb_get_serial_port_data(port);
@@ -1202,7 +1202,7 @@
.tiocmset = iuu_tiocmset,
.set_termios = iuu_set_termios,
.attach = iuu_startup,
- .shutdown = iuu_shutdown,
+ .release = iuu_release,
};
static int __init iuu_init(void)
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index f1195a9..2594b87 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2689,7 +2689,7 @@
return 0;
}
-static void keyspan_shutdown(struct usb_serial *serial)
+static void keyspan_disconnect(struct usb_serial *serial)
{
int i, j;
struct usb_serial_port *port;
@@ -2729,6 +2729,17 @@
usb_free_urb(p_priv->out_urbs[j]);
}
}
+}
+
+static void keyspan_release(struct usb_serial *serial)
+{
+ int i;
+ struct usb_serial_port *port;
+ struct keyspan_serial_private *s_priv;
+
+ dbg("%s", __func__);
+
+ s_priv = usb_get_serial_data(serial);
/* dbg("Freeing serial->private."); */
kfree(s_priv);
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 0d4569b..3107ed1 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -41,7 +41,8 @@
static void keyspan_close (struct usb_serial_port *port);
static void keyspan_dtr_rts (struct usb_serial_port *port, int on);
static int keyspan_startup (struct usb_serial *serial);
-static void keyspan_shutdown (struct usb_serial *serial);
+static void keyspan_disconnect (struct usb_serial *serial);
+static void keyspan_release (struct usb_serial *serial);
static int keyspan_write_room (struct tty_struct *tty);
static int keyspan_write (struct tty_struct *tty,
@@ -569,7 +570,8 @@
.tiocmget = keyspan_tiocmget,
.tiocmset = keyspan_tiocmset,
.attach = keyspan_startup,
- .shutdown = keyspan_shutdown,
+ .disconnect = keyspan_disconnect,
+ .release = keyspan_release,
};
static struct usb_serial_driver keyspan_2port_device = {
@@ -590,7 +592,8 @@
.tiocmget = keyspan_tiocmget,
.tiocmset = keyspan_tiocmset,
.attach = keyspan_startup,
- .shutdown = keyspan_shutdown,
+ .disconnect = keyspan_disconnect,
+ .release = keyspan_release,
};
static struct usb_serial_driver keyspan_4port_device = {
@@ -611,7 +614,8 @@
.tiocmget = keyspan_tiocmget,
.tiocmset = keyspan_tiocmset,
.attach = keyspan_startup,
- .shutdown = keyspan_shutdown,
+ .disconnect = keyspan_disconnect,
+ .release = keyspan_release,
};
#endif
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index ab769db..d0b12e4 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -809,7 +809,7 @@
return 0;
}
-static void keyspan_pda_shutdown(struct usb_serial *serial)
+static void keyspan_pda_release(struct usb_serial *serial)
{
dbg("%s", __func__);
@@ -869,7 +869,7 @@
.tiocmget = keyspan_pda_tiocmget,
.tiocmset = keyspan_pda_tiocmset,
.attach = keyspan_pda_startup,
- .shutdown = keyspan_pda_shutdown,
+ .release = keyspan_pda_release,
};
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index fa817c6..0f44bb8 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -73,7 +73,8 @@
* Function prototypes
*/
static int klsi_105_startup(struct usb_serial *serial);
-static void klsi_105_shutdown(struct usb_serial *serial);
+static void klsi_105_disconnect(struct usb_serial *serial);
+static void klsi_105_release(struct usb_serial *serial);
static int klsi_105_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void klsi_105_close(struct usb_serial_port *port);
@@ -131,7 +132,8 @@
.tiocmget = klsi_105_tiocmget,
.tiocmset = klsi_105_tiocmset,
.attach = klsi_105_startup,
- .shutdown = klsi_105_shutdown,
+ .disconnect = klsi_105_disconnect,
+ .release = klsi_105_release,
.throttle = klsi_105_throttle,
.unthrottle = klsi_105_unthrottle,
};
@@ -315,7 +317,7 @@
} /* klsi_105_startup */
-static void klsi_105_shutdown(struct usb_serial *serial)
+static void klsi_105_disconnect(struct usb_serial *serial)
{
int i;
@@ -325,33 +327,36 @@
for (i = 0; i < serial->num_ports; ++i) {
struct klsi_105_private *priv =
usb_get_serial_port_data(serial->port[i]);
- unsigned long flags;
if (priv) {
/* kill our write urb pool */
int j;
struct urb **write_urbs = priv->write_urb_pool;
- spin_lock_irqsave(&priv->lock, flags);
for (j = 0; j < NUM_URBS; j++) {
if (write_urbs[j]) {
- /* FIXME - uncomment the following
- * usb_kill_urb call when the host
- * controllers get fixed to set
- * urb->dev = NULL after the urb is
- * finished. Otherwise this call
- * oopses. */
- /* usb_kill_urb(write_urbs[j]); */
- kfree(write_urbs[j]->transfer_buffer);
+ usb_kill_urb(write_urbs[j]);
usb_free_urb(write_urbs[j]);
}
}
- spin_unlock_irqrestore(&priv->lock, flags);
- kfree(priv);
- usb_set_serial_port_data(serial->port[i], NULL);
}
}
-} /* klsi_105_shutdown */
+} /* klsi_105_disconnect */
+
+
+static void klsi_105_release(struct usb_serial *serial)
+{
+ int i;
+
+ dbg("%s", __func__);
+
+ for (i = 0; i < serial->num_ports; ++i) {
+ struct klsi_105_private *priv =
+ usb_get_serial_port_data(serial->port[i]);
+
+ kfree(priv);
+ }
+} /* klsi_105_release */
static int klsi_105_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6b57049..6db0e56 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -69,7 +69,7 @@
/* Function prototypes */
static int kobil_startup(struct usb_serial *serial);
-static void kobil_shutdown(struct usb_serial *serial);
+static void kobil_release(struct usb_serial *serial);
static int kobil_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void kobil_close(struct usb_serial_port *port);
@@ -117,7 +117,7 @@
.id_table = id_table,
.num_ports = 1,
.attach = kobil_startup,
- .shutdown = kobil_shutdown,
+ .release = kobil_release,
.ioctl = kobil_ioctl,
.set_termios = kobil_set_termios,
.tiocmget = kobil_tiocmget,
@@ -201,17 +201,13 @@
}
-static void kobil_shutdown(struct usb_serial *serial)
+static void kobil_release(struct usb_serial *serial)
{
int i;
dbg("%s - port %d", __func__, serial->port[0]->number);
- for (i = 0; i < serial->num_ports; ++i) {
- while (serial->port[i]->port.count > 0)
- kobil_close(serial->port[i]);
+ for (i = 0; i < serial->num_ports; ++i)
kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
- }
}
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 8737955..d8825e1 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -92,7 +92,7 @@
* Function prototypes
*/
static int mct_u232_startup(struct usb_serial *serial);
-static void mct_u232_shutdown(struct usb_serial *serial);
+static void mct_u232_release(struct usb_serial *serial);
static int mct_u232_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void mct_u232_close(struct usb_serial_port *port);
@@ -149,7 +149,7 @@
.tiocmget = mct_u232_tiocmget,
.tiocmset = mct_u232_tiocmset,
.attach = mct_u232_startup,
- .shutdown = mct_u232_shutdown,
+ .release = mct_u232_release,
};
@@ -407,7 +407,7 @@
} /* mct_u232_startup */
-static void mct_u232_shutdown(struct usb_serial *serial)
+static void mct_u232_release(struct usb_serial *serial)
{
struct mct_u232_private *priv;
int i;
@@ -417,12 +417,9 @@
for (i = 0; i < serial->num_ports; ++i) {
/* My special items, the standard routines free my urbs */
priv = usb_get_serial_port_data(serial->port[i]);
- if (priv) {
- usb_set_serial_port_data(serial->port[i], NULL);
- kfree(priv);
- }
+ kfree(priv);
}
-} /* mct_u232_shutdown */
+} /* mct_u232_release */
static int mct_u232_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 9e1a013..bfc5ce0 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1521,19 +1521,16 @@
return 0;
}
-static void mos7720_shutdown(struct usb_serial *serial)
+static void mos7720_release(struct usb_serial *serial)
{
int i;
/* free private structure allocated for serial port */
- for (i = 0; i < serial->num_ports; ++i) {
+ for (i = 0; i < serial->num_ports; ++i)
kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
- }
/* free private structure allocated for serial device */
kfree(usb_get_serial_data(serial));
- usb_set_serial_data(serial, NULL);
}
static struct usb_driver usb_driver = {
@@ -1558,7 +1555,7 @@
.throttle = mos7720_throttle,
.unthrottle = mos7720_unthrottle,
.attach = mos7720_startup,
- .shutdown = mos7720_shutdown,
+ .release = mos7720_release,
.ioctl = mos7720_ioctl,
.set_termios = mos7720_set_termios,
.write = mos7720_write,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 10b78a3..c40f95c 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -238,7 +238,7 @@
{
struct usb_device *dev = port->serial->dev;
val = val & 0x00ff;
- dbg("mos7840_set_reg_sync offset is %x, value %x\n", reg, val);
+ dbg("mos7840_set_reg_sync offset is %x, value %x", reg, val);
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
MCS_WR_RTYPE, val, reg, NULL, 0,
@@ -260,7 +260,7 @@
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
MOS_WDR_TIMEOUT);
- dbg("mos7840_get_reg_sync offset is %x, return val %x\n", reg, *val);
+ dbg("mos7840_get_reg_sync offset is %x, return val %x", reg, *val);
*val = (*val) & 0x00ff;
return ret;
}
@@ -282,18 +282,18 @@
if (port->serial->num_ports == 4) {
val |= (((__u16) port->number -
(__u16) (port->serial->minor)) + 1) << 8;
- dbg("mos7840_set_uart_reg application number is %x\n", val);
+ dbg("mos7840_set_uart_reg application number is %x", val);
} else {
if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
val |= (((__u16) port->number -
(__u16) (port->serial->minor)) + 1) << 8;
- dbg("mos7840_set_uart_reg application number is %x\n",
+ dbg("mos7840_set_uart_reg application number is %x",
val);
} else {
val |=
(((__u16) port->number -
(__u16) (port->serial->minor)) + 2) << 8;
- dbg("mos7840_set_uart_reg application number is %x\n",
+ dbg("mos7840_set_uart_reg application number is %x",
val);
}
}
@@ -315,24 +315,24 @@
int ret = 0;
__u16 Wval;
- /* dbg("application number is %4x \n",
+ /* dbg("application number is %4x",
(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */
/* Wval is same as application number */
if (port->serial->num_ports == 4) {
Wval =
(((__u16) port->number - (__u16) (port->serial->minor)) +
1) << 8;
- dbg("mos7840_get_uart_reg application number is %x\n", Wval);
+ dbg("mos7840_get_uart_reg application number is %x", Wval);
} else {
if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
Wval = (((__u16) port->number -
(__u16) (port->serial->minor)) + 1) << 8;
- dbg("mos7840_get_uart_reg application number is %x\n",
+ dbg("mos7840_get_uart_reg application number is %x",
Wval);
} else {
Wval = (((__u16) port->number -
(__u16) (port->serial->minor)) + 2) << 8;
- dbg("mos7840_get_uart_reg application number is %x\n",
+ dbg("mos7840_get_uart_reg application number is %x",
Wval);
}
}
@@ -346,11 +346,11 @@
static void mos7840_dump_serial_port(struct moschip_port *mos7840_port)
{
- dbg("***************************************\n");
- dbg("SpRegOffset is %2x\n", mos7840_port->SpRegOffset);
- dbg("ControlRegOffset is %2x \n", mos7840_port->ControlRegOffset);
- dbg("DCRRegOffset is %2x \n", mos7840_port->DcrRegOffset);
- dbg("***************************************\n");
+ dbg("***************************************");
+ dbg("SpRegOffset is %2x", mos7840_port->SpRegOffset);
+ dbg("ControlRegOffset is %2x", mos7840_port->ControlRegOffset);
+ dbg("DCRRegOffset is %2x", mos7840_port->DcrRegOffset);
+ dbg("***************************************");
}
@@ -474,12 +474,12 @@
goto exit;
}
- dbg("%s urb buffer size is %d\n", __func__, urb->actual_length);
- dbg("%s mos7840_port->MsrLsr is %d port %d\n", __func__,
+ dbg("%s urb buffer size is %d", __func__, urb->actual_length);
+ dbg("%s mos7840_port->MsrLsr is %d port %d", __func__,
mos7840_port->MsrLsr, mos7840_port->port_num);
data = urb->transfer_buffer;
regval = (__u8) data[0];
- dbg("%s data is %x\n", __func__, regval);
+ dbg("%s data is %x", __func__, regval);
if (mos7840_port->MsrLsr == 0)
mos7840_handle_new_msr(mos7840_port, regval);
else if (mos7840_port->MsrLsr == 1)
@@ -538,7 +538,7 @@
__u16 wval, wreg = 0;
int status = urb->status;
- dbg("%s", " : Entering\n");
+ dbg("%s", " : Entering");
switch (status) {
case 0:
@@ -570,7 +570,7 @@
* Byte 5 FIFO status for both */
if (length && length > 5) {
- dbg("%s \n", "Wrong data !!!");
+ dbg("%s", "Wrong data !!!");
return;
}
@@ -587,17 +587,17 @@
(__u16) (serial->minor)) + 1) << 8;
if (mos7840_port->open) {
if (sp[i] & 0x01) {
- dbg("SP%d No Interrupt !!!\n", i);
+ dbg("SP%d No Interrupt !!!", i);
} else {
switch (sp[i] & 0x0f) {
case SERIAL_IIR_RLS:
dbg("Serial Port %d: Receiver status error or ", i);
- dbg("address bit detected in 9-bit mode\n");
+ dbg("address bit detected in 9-bit mode");
mos7840_port->MsrLsr = 1;
wreg = LINE_STATUS_REGISTER;
break;
case SERIAL_IIR_MS:
- dbg("Serial Port %d: Modem status change\n", i);
+ dbg("Serial Port %d: Modem status change", i);
mos7840_port->MsrLsr = 0;
wreg = MODEM_STATUS_REGISTER;
break;
@@ -689,7 +689,7 @@
mos7840_port = urb->context;
if (!mos7840_port) {
- dbg("%s", "NULL mos7840_port pointer \n");
+ dbg("%s", "NULL mos7840_port pointer");
mos7840_port->read_urb_busy = false;
return;
}
@@ -702,41 +702,41 @@
port = (struct usb_serial_port *)mos7840_port->port;
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed \n");
+ dbg("%s", "Port Paranoia failed");
mos7840_port->read_urb_busy = false;
return;
}
serial = mos7840_get_usb_serial(port, __func__);
if (!serial) {
- dbg("%s\n", "Bad serial pointer ");
+ dbg("%s", "Bad serial pointer");
mos7840_port->read_urb_busy = false;
return;
}
- dbg("%s\n", "Entering... \n");
+ dbg("%s", "Entering... ");
data = urb->transfer_buffer;
- dbg("%s", "Entering ........... \n");
+ dbg("%s", "Entering ...........");
if (urb->actual_length) {
tty = tty_port_tty_get(&mos7840_port->port->port);
if (tty) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
- dbg(" %s \n", data);
+ dbg(" %s ", data);
tty_flip_buffer_push(tty);
tty_kref_put(tty);
}
mos7840_port->icount.rx += urb->actual_length;
smp_wmb();
- dbg("mos7840_port->icount.rx is %d:\n",
+ dbg("mos7840_port->icount.rx is %d:",
mos7840_port->icount.rx);
}
if (!mos7840_port->read_urb) {
- dbg("%s", "URB KILLED !!!\n");
+ dbg("%s", "URB KILLED !!!");
mos7840_port->read_urb_busy = false;
return;
}
@@ -777,16 +777,16 @@
spin_unlock(&mos7840_port->pool_lock);
if (status) {
- dbg("nonzero write bulk status received:%d\n", status);
+ dbg("nonzero write bulk status received:%d", status);
return;
}
if (mos7840_port_paranoia_check(mos7840_port->port, __func__)) {
- dbg("%s", "Port Paranoia failed \n");
+ dbg("%s", "Port Paranoia failed");
return;
}
- dbg("%s \n", "Entering .........");
+ dbg("%s", "Entering .........");
tty = tty_port_tty_get(&mos7840_port->port->port);
if (tty && mos7840_port->open)
@@ -830,15 +830,17 @@
struct moschip_port *mos7840_port;
struct moschip_port *port0;
+ dbg ("%s enter", __func__);
+
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed \n");
+ dbg("%s", "Port Paranoia failed");
return -ENODEV;
}
serial = port->serial;
if (mos7840_serial_paranoia_check(serial, __func__)) {
- dbg("%s", "Serial Paranoia failed \n");
+ dbg("%s", "Serial Paranoia failed");
return -ENODEV;
}
@@ -891,20 +893,20 @@
Data = 0x0;
status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
if (status < 0) {
- dbg("Reading Spreg failed\n");
+ dbg("Reading Spreg failed");
return -1;
}
Data |= 0x80;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
if (status < 0) {
- dbg("writing Spreg failed\n");
+ dbg("writing Spreg failed");
return -1;
}
Data &= ~0x80;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
if (status < 0) {
- dbg("writing Spreg failed\n");
+ dbg("writing Spreg failed");
return -1;
}
/* End of block to be checked */
@@ -913,7 +915,7 @@
status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
&Data);
if (status < 0) {
- dbg("Reading Controlreg failed\n");
+ dbg("Reading Controlreg failed");
return -1;
}
Data |= 0x08; /* Driver done bit */
@@ -921,7 +923,7 @@
status = mos7840_set_reg_sync(port,
mos7840_port->ControlRegOffset, Data);
if (status < 0) {
- dbg("writing Controlreg failed\n");
+ dbg("writing Controlreg failed");
return -1;
}
/* do register settings here */
@@ -932,21 +934,21 @@
Data = 0x00;
status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
if (status < 0) {
- dbg("disableing interrupts failed\n");
+ dbg("disabling interrupts failed");
return -1;
}
/* Set FIFO_CONTROL_REGISTER to the default value */
Data = 0x00;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
- dbg("Writing FIFO_CONTROL_REGISTER failed\n");
+ dbg("Writing FIFO_CONTROL_REGISTER failed");
return -1;
}
Data = 0xcf;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
- dbg("Writing FIFO_CONTROL_REGISTER failed\n");
+ dbg("Writing FIFO_CONTROL_REGISTER failed");
return -1;
}
@@ -1043,12 +1045,12 @@
* (can't set it up in mos7840_startup as the *
* structures were not set up at that time.) */
- dbg("port number is %d \n", port->number);
- dbg("serial number is %d \n", port->serial->minor);
- dbg("Bulkin endpoint is %d \n", port->bulk_in_endpointAddress);
- dbg("BulkOut endpoint is %d \n", port->bulk_out_endpointAddress);
- dbg("Interrupt endpoint is %d \n", port->interrupt_in_endpointAddress);
- dbg("port's number in the device is %d\n", mos7840_port->port_num);
+ dbg("port number is %d", port->number);
+ dbg("serial number is %d", port->serial->minor);
+ dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress);
+ dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress);
+ dbg("Interrupt endpoint is %d", port->interrupt_in_endpointAddress);
+ dbg("port's number in the device is %d", mos7840_port->port_num);
mos7840_port->read_urb = port->read_urb;
/* set up our bulk in urb */
@@ -1061,7 +1063,7 @@
mos7840_port->read_urb->transfer_buffer_length,
mos7840_bulk_in_callback, mos7840_port);
- dbg("mos7840_open: bulkin endpoint is %d\n",
+ dbg("mos7840_open: bulkin endpoint is %d",
port->bulk_in_endpointAddress);
mos7840_port->read_urb_busy = true;
response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
@@ -1087,9 +1089,11 @@
mos7840_port->icount.tx = 0;
mos7840_port->icount.rx = 0;
- dbg("\n\nusb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p\n\n",
+ dbg("usb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p",
serial, mos7840_port, port);
+ dbg ("%s leave", __func__);
+
return 0;
}
@@ -1112,16 +1116,16 @@
unsigned long flags;
struct moschip_port *mos7840_port;
- dbg("%s \n", " mos7840_chars_in_buffer:entering ...........");
+ dbg("%s", " mos7840_chars_in_buffer:entering ...........");
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return 0;
}
mos7840_port = mos7840_get_port_private(port);
if (mos7840_port == NULL) {
- dbg("%s \n", "mos7840_break:leaving ...........");
+ dbg("%s", "mos7840_break:leaving ...........");
return 0;
}
@@ -1148,16 +1152,16 @@
int j;
__u16 Data;
- dbg("%s\n", "mos7840_close:entering...");
+ dbg("%s", "mos7840_close:entering...");
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed \n");
+ dbg("%s", "Port Paranoia failed");
return;
}
serial = mos7840_get_usb_serial(port, __func__);
if (!serial) {
- dbg("%s", "Serial Paranoia failed \n");
+ dbg("%s", "Serial Paranoia failed");
return;
}
@@ -1185,27 +1189,27 @@
* and interrupt read if they exists */
if (serial->dev) {
if (mos7840_port->write_urb) {
- dbg("%s", "Shutdown bulk write\n");
+ dbg("%s", "Shutdown bulk write");
usb_kill_urb(mos7840_port->write_urb);
}
if (mos7840_port->read_urb) {
- dbg("%s", "Shutdown bulk read\n");
+ dbg("%s", "Shutdown bulk read");
usb_kill_urb(mos7840_port->read_urb);
mos7840_port->read_urb_busy = false;
}
if ((&mos7840_port->control_urb)) {
- dbg("%s", "Shutdown control read\n");
+ dbg("%s", "Shutdown control read");
/*/ usb_kill_urb (mos7840_port->control_urb); */
}
}
/* if(mos7840_port->ctrl_buf != NULL) */
/* kfree(mos7840_port->ctrl_buf); */
port0->open_ports--;
- dbg("mos7840_num_open_ports in close%d:in port%d\n",
+ dbg("mos7840_num_open_ports in close%d:in port%d",
port0->open_ports, port->number);
if (port0->open_ports == 0) {
if (serial->port[0]->interrupt_in_urb) {
- dbg("%s", "Shutdown interrupt_in_urb\n");
+ dbg("%s", "Shutdown interrupt_in_urb");
usb_kill_urb(serial->port[0]->interrupt_in_urb);
}
}
@@ -1225,7 +1229,7 @@
mos7840_port->open = 0;
- dbg("%s \n", "Leaving ............");
+ dbg("%s", "Leaving ............");
}
/************************************************************************
@@ -1280,17 +1284,17 @@
struct usb_serial *serial;
struct moschip_port *mos7840_port;
- dbg("%s \n", "Entering ...........");
- dbg("mos7840_break: Start\n");
+ dbg("%s", "Entering ...........");
+ dbg("mos7840_break: Start");
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed \n");
+ dbg("%s", "Port Paranoia failed");
return;
}
serial = mos7840_get_usb_serial(port, __func__);
if (!serial) {
- dbg("%s", "Serial Paranoia failed \n");
+ dbg("%s", "Serial Paranoia failed");
return;
}
@@ -1310,7 +1314,7 @@
/* FIXME: no locking on shadowLCR anywhere in driver */
mos7840_port->shadowLCR = data;
- dbg("mcs7840_break mos7840_port->shadowLCR is %x\n",
+ dbg("mcs7840_break mos7840_port->shadowLCR is %x",
mos7840_port->shadowLCR);
mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER,
mos7840_port->shadowLCR);
@@ -1334,17 +1338,17 @@
unsigned long flags;
struct moschip_port *mos7840_port;
- dbg("%s \n", " mos7840_write_room:entering ...........");
+ dbg("%s", " mos7840_write_room:entering ...........");
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
- dbg("%s \n", " mos7840_write_room:leaving ...........");
+ dbg("%s", "Invalid port");
+ dbg("%s", " mos7840_write_room:leaving ...........");
return -1;
}
mos7840_port = mos7840_get_port_private(port);
if (mos7840_port == NULL) {
- dbg("%s \n", "mos7840_break:leaving ...........");
+ dbg("%s", "mos7840_break:leaving ...........");
return -1;
}
@@ -1384,16 +1388,16 @@
/* __u16 Data; */
const unsigned char *current_position = data;
unsigned char *data1;
- dbg("%s \n", "entering ...........");
- /* dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
+ dbg("%s", "entering ...........");
+ /* dbg("mos7840_write: mos7840_port->shadowLCR is %x",
mos7840_port->shadowLCR); */
#ifdef NOTMOS7840
Data = 0x00;
status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
mos7840_port->shadowLCR = Data;
- dbg("mos7840_write: LINE_CONTROL_REGISTER is %x\n", Data);
- dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
+ dbg("mos7840_write: LINE_CONTROL_REGISTER is %x", Data);
+ dbg("mos7840_write: mos7840_port->shadowLCR is %x",
mos7840_port->shadowLCR);
/* Data = 0x03; */
@@ -1407,32 +1411,32 @@
/* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */
Data = 0x00;
status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data);
- dbg("mos7840_write:DLL value is %x\n", Data);
+ dbg("mos7840_write:DLL value is %x", Data);
Data = 0x0;
status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data);
- dbg("mos7840_write:DLM value is %x\n", Data);
+ dbg("mos7840_write:DLM value is %x", Data);
Data = Data & ~SERIAL_LCR_DLAB;
- dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
+ dbg("mos7840_write: mos7840_port->shadowLCR is %x",
mos7840_port->shadowLCR);
status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
#endif
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed \n");
+ dbg("%s", "Port Paranoia failed");
return -1;
}
serial = port->serial;
if (mos7840_serial_paranoia_check(serial, __func__)) {
- dbg("%s", "Serial Paranoia failed \n");
+ dbg("%s", "Serial Paranoia failed");
return -1;
}
mos7840_port = mos7840_get_port_private(port);
if (mos7840_port == NULL) {
- dbg("%s", "mos7840_port is NULL\n");
+ dbg("%s", "mos7840_port is NULL");
return -1;
}
@@ -1444,7 +1448,7 @@
if (!mos7840_port->busy[i]) {
mos7840_port->busy[i] = 1;
urb = mos7840_port->write_urb_pool[i];
- dbg("\nURB:%d", i);
+ dbg("URB:%d", i);
break;
}
}
@@ -1479,7 +1483,7 @@
mos7840_bulk_out_data_callback, mos7840_port);
data1 = urb->transfer_buffer;
- dbg("\nbulkout endpoint is %d", port->bulk_out_endpointAddress);
+ dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
/* send it down the pipe */
status = usb_submit_urb(urb, GFP_ATOMIC);
@@ -1494,7 +1498,7 @@
bytes_sent = transfer_size;
mos7840_port->icount.tx += transfer_size;
smp_wmb();
- dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
+ dbg("mos7840_port->icount.tx is %d:", mos7840_port->icount.tx);
exit:
return bytes_sent;
@@ -1513,11 +1517,11 @@
int status;
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return;
}
- dbg("- port %d\n", port->number);
+ dbg("- port %d", port->number);
mos7840_port = mos7840_get_port_private(port);
@@ -1525,11 +1529,11 @@
return;
if (!mos7840_port->open) {
- dbg("%s\n", "port not opened");
+ dbg("%s", "port not opened");
return;
}
- dbg("%s", "Entering .......... \n");
+ dbg("%s", "Entering ..........");
/* if we are implementing XON/XOFF, send the stop character */
if (I_IXOFF(tty)) {
@@ -1563,7 +1567,7 @@
struct moschip_port *mos7840_port = mos7840_get_port_private(port);
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return;
}
@@ -1575,7 +1579,7 @@
return;
}
- dbg("%s", "Entering .......... \n");
+ dbg("%s", "Entering ..........");
/* if we are implementing XON/XOFF, send the start character */
if (I_IXOFF(tty)) {
@@ -1660,7 +1664,7 @@
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
if (status < 0) {
- dbg("setting MODEM_CONTROL_REGISTER Failed\n");
+ dbg("setting MODEM_CONTROL_REGISTER Failed");
return status;
}
@@ -1729,11 +1733,11 @@
custom++;
*divisor = custom;
- dbg(" Baud %d = %d\n", baudrate, custom);
+ dbg(" Baud %d = %d", baudrate, custom);
return 0;
}
- dbg("%s\n", " Baud calculation Failed...");
+ dbg("%s", " Baud calculation Failed...");
return -1;
#endif
}
@@ -1759,16 +1763,16 @@
port = (struct usb_serial_port *)mos7840_port->port;
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return -1;
}
if (mos7840_serial_paranoia_check(port->serial, __func__)) {
- dbg("%s", "Invalid Serial \n");
+ dbg("%s", "Invalid Serial");
return -1;
}
- dbg("%s", "Entering .......... \n");
+ dbg("%s", "Entering ..........");
number = mos7840_port->port->number - mos7840_port->port->serial->minor;
@@ -1784,7 +1788,7 @@
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
Data);
if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud\n");
+ dbg("Writing spreg failed in set_serial_baud");
return -1;
}
#endif
@@ -1797,7 +1801,7 @@
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
Data);
if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud\n");
+ dbg("Writing spreg failed in set_serial_baud");
return -1;
}
#endif
@@ -1812,14 +1816,14 @@
status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset,
&Data);
if (status < 0) {
- dbg("reading spreg failed in set_serial_baud\n");
+ dbg("reading spreg failed in set_serial_baud");
return -1;
}
Data = (Data & 0x8f) | clk_sel_val;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset,
Data);
if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud\n");
+ dbg("Writing spreg failed in set_serial_baud");
return -1;
}
/* Calculate the Divisor */
@@ -1835,11 +1839,11 @@
/* Write the divisor */
Data = (unsigned char)(divisor & 0xff);
- dbg("set_serial_baud Value to write DLL is %x\n", Data);
+ dbg("set_serial_baud Value to write DLL is %x", Data);
mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
Data = (unsigned char)((divisor & 0xff00) >> 8);
- dbg("set_serial_baud Value to write DLM is %x\n", Data);
+ dbg("set_serial_baud Value to write DLM is %x", Data);
mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
/* Disable access to divisor latch */
@@ -1877,12 +1881,12 @@
port = (struct usb_serial_port *)mos7840_port->port;
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return;
}
if (mos7840_serial_paranoia_check(port->serial, __func__)) {
- dbg("%s", "Invalid Serial \n");
+ dbg("%s", "Invalid Serial");
return;
}
@@ -1895,7 +1899,7 @@
return;
}
- dbg("%s", "Entering .......... \n");
+ dbg("%s", "Entering ..........");
lData = LCR_BITS_8;
lStop = LCR_STOP_1;
@@ -1955,7 +1959,7 @@
~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
mos7840_port->shadowLCR |= (lData | lParity | lStop);
- dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x\n",
+ dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x",
mos7840_port->shadowLCR);
/* Disable Interrupts */
Data = 0x00;
@@ -1997,7 +2001,7 @@
if (!baud) {
/* pick a default, any default... */
- dbg("%s\n", "Picked default baud...");
+ dbg("%s", "Picked default baud...");
baud = 9600;
}
@@ -2020,7 +2024,7 @@
}
wake_up(&mos7840_port->delta_msr_wait);
mos7840_port->delta_msr_cond = 1;
- dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x\n",
+ dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x",
mos7840_port->shadowLCR);
return;
@@ -2040,16 +2044,16 @@
unsigned int cflag;
struct usb_serial *serial;
struct moschip_port *mos7840_port;
- dbg("mos7840_set_termios: START\n");
+ dbg("mos7840_set_termios: START");
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return;
}
serial = port->serial;
if (mos7840_serial_paranoia_check(serial, __func__)) {
- dbg("%s", "Invalid Serial \n");
+ dbg("%s", "Invalid Serial");
return;
}
@@ -2063,7 +2067,7 @@
return;
}
- dbg("%s\n", "setting termios - ");
+ dbg("%s", "setting termios - ");
cflag = tty->termios->c_cflag;
@@ -2078,7 +2082,7 @@
mos7840_change_port_settings(tty, mos7840_port, old_termios);
if (!mos7840_port->read_urb) {
- dbg("%s", "URB KILLED !!!!!\n");
+ dbg("%s", "URB KILLED !!!!!");
return;
}
@@ -2144,7 +2148,7 @@
port = (struct usb_serial_port *)mos7840_port->port;
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return -1;
}
@@ -2189,7 +2193,7 @@
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
unlock_kernel();
if (status < 0) {
- dbg("setting MODEM_CONTROL_REGISTER Failed\n");
+ dbg("setting MODEM_CONTROL_REGISTER Failed");
return -1;
}
@@ -2274,7 +2278,7 @@
int mosret = 0;
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return -1;
}
@@ -2374,9 +2378,8 @@
{
int mos7840_num_ports = 0;
- dbg("numberofendpoints: %d \n",
- (int)serial->interface->cur_altsetting->desc.bNumEndpoints);
- dbg("numberofendpoints: %d \n",
+ dbg("numberofendpoints: cur %d, alt %d",
+ (int)serial->interface->cur_altsetting->desc.bNumEndpoints,
(int)serial->interface->altsetting->desc.bNumEndpoints);
if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) {
mos7840_num_ports = serial->num_ports = 2;
@@ -2385,7 +2388,7 @@
serial->num_bulk_out = 4;
mos7840_num_ports = serial->num_ports = 4;
}
-
+ dbg ("mos7840_num_ports = %d", mos7840_num_ports);
return mos7840_num_ports;
}
@@ -2400,22 +2403,24 @@
int i, status;
__u16 Data;
- dbg("%s \n", " mos7840_startup :entering..........");
+ dbg("%s", "mos7840_startup :Entering..........");
if (!serial) {
- dbg("%s\n", "Invalid Handler");
+ dbg("%s", "Invalid Handler");
return -1;
}
dev = serial->dev;
- dbg("%s\n", "Entering...");
+ dbg("%s", "Entering...");
+ dbg ("mos7840_startup: serial = %p", serial);
/* we set up the pointers to the endpoints in the mos7840_open *
* function, as the structures aren't created yet. */
/* set up port private structures */
for (i = 0; i < serial->num_ports; ++i) {
+ dbg ("mos7840_startup: configuring port %d............", i);
mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7840_port == NULL) {
dev_err(&dev->dev, "%s - Out of memory\n", __func__);
@@ -2473,10 +2478,10 @@
status = mos7840_get_reg_sync(serial->port[i],
mos7840_port->ControlRegOffset, &Data);
if (status < 0) {
- dbg("Reading ControlReg failed status-0x%x\n", status);
+ dbg("Reading ControlReg failed status-0x%x", status);
break;
} else
- dbg("ControlReg Reading success val is %x, status%d\n",
+ dbg("ControlReg Reading success val is %x, status%d",
Data, status);
Data |= 0x08; /* setting driver done bit */
Data |= 0x04; /* sp1_bit to have cts change reflect in
@@ -2486,10 +2491,10 @@
status = mos7840_set_reg_sync(serial->port[i],
mos7840_port->ControlRegOffset, Data);
if (status < 0) {
- dbg("Writing ControlReg failed(rx_disable) status-0x%x\n", status);
+ dbg("Writing ControlReg failed(rx_disable) status-0x%x", status);
break;
} else
- dbg("ControlReg Writing success(rx_disable) status%d\n",
+ dbg("ControlReg Writing success(rx_disable) status%d",
status);
/* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
@@ -2498,48 +2503,48 @@
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (mos7840_port->DcrRegOffset + 0), Data);
if (status < 0) {
- dbg("Writing DCR0 failed status-0x%x\n", status);
+ dbg("Writing DCR0 failed status-0x%x", status);
break;
} else
- dbg("DCR0 Writing success status%d\n", status);
+ dbg("DCR0 Writing success status%d", status);
Data = 0x05;
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (mos7840_port->DcrRegOffset + 1), Data);
if (status < 0) {
- dbg("Writing DCR1 failed status-0x%x\n", status);
+ dbg("Writing DCR1 failed status-0x%x", status);
break;
} else
- dbg("DCR1 Writing success status%d\n", status);
+ dbg("DCR1 Writing success status%d", status);
Data = 0x24;
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (mos7840_port->DcrRegOffset + 2), Data);
if (status < 0) {
- dbg("Writing DCR2 failed status-0x%x\n", status);
+ dbg("Writing DCR2 failed status-0x%x", status);
break;
} else
- dbg("DCR2 Writing success status%d\n", status);
+ dbg("DCR2 Writing success status%d", status);
/* write values in clkstart0x0 and clkmulti 0x20 */
Data = 0x0;
status = mos7840_set_reg_sync(serial->port[i],
CLK_START_VALUE_REGISTER, Data);
if (status < 0) {
- dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
+ dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x", status);
break;
} else
- dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status);
+ dbg("CLK_START_VALUE_REGISTER Writing success status%d", status);
Data = 0x20;
status = mos7840_set_reg_sync(serial->port[i],
CLK_MULTI_REGISTER, Data);
if (status < 0) {
- dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n",
+ dbg("Writing CLK_MULTI_REGISTER failed status-0x%x",
status);
goto error;
} else
- dbg("CLK_MULTI_REGISTER Writing success status%d\n",
+ dbg("CLK_MULTI_REGISTER Writing success status%d",
status);
/* write value 0x0 to scratchpad register */
@@ -2547,11 +2552,11 @@
status = mos7840_set_uart_reg(serial->port[i],
SCRATCH_PAD_REGISTER, Data);
if (status < 0) {
- dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n",
+ dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x",
status);
break;
} else
- dbg("SCRATCH_PAD_REGISTER Writing success status%d\n",
+ dbg("SCRATCH_PAD_REGISTER Writing success status%d",
status);
/* Zero Length flag register */
@@ -2562,30 +2567,30 @@
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (ZLP_REG1 +
((__u16)mos7840_port->port_num)), Data);
- dbg("ZLIP offset%x\n",
+ dbg("ZLIP offset %x",
(__u16) (ZLP_REG1 +
((__u16) mos7840_port->port_num)));
if (status < 0) {
- dbg("Writing ZLP_REG%d failed status-0x%x\n",
+ dbg("Writing ZLP_REG%d failed status-0x%x",
i + 2, status);
break;
} else
- dbg("ZLP_REG%d Writing success status%d\n",
+ dbg("ZLP_REG%d Writing success status%d",
i + 2, status);
} else {
Data = 0xff;
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (ZLP_REG1 +
((__u16)mos7840_port->port_num) - 0x1), Data);
- dbg("ZLIP offset%x\n",
+ dbg("ZLIP offset %x",
(__u16) (ZLP_REG1 +
((__u16) mos7840_port->port_num) - 0x1));
if (status < 0) {
- dbg("Writing ZLP_REG%d failed status-0x%x\n",
+ dbg("Writing ZLP_REG%d failed status-0x%x",
i + 1, status);
break;
} else
- dbg("ZLP_REG%d Writing success status%d\n",
+ dbg("ZLP_REG%d Writing success status%d",
i + 1, status);
}
@@ -2599,15 +2604,16 @@
goto error;
}
}
+ dbg ("mos7840_startup: all ports configured...........");
/* Zero Length flag enable */
Data = 0x0f;
status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
if (status < 0) {
- dbg("Writing ZLP_REG5 failed status-0x%x\n", status);
+ dbg("Writing ZLP_REG5 failed status-0x%x", status);
goto error;
} else
- dbg("ZLP_REG5 Writing success status%d\n", status);
+ dbg("ZLP_REG5 Writing success status%d", status);
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
@@ -2627,19 +2633,19 @@
}
/****************************************************************************
- * mos7840_shutdown
+ * mos7840_disconnect
* This function is called whenever the device is removed from the usb bus.
****************************************************************************/
-static void mos7840_shutdown(struct usb_serial *serial)
+static void mos7840_disconnect(struct usb_serial *serial)
{
int i;
unsigned long flags;
struct moschip_port *mos7840_port;
- dbg("%s \n", " shutdown :entering..........");
+ dbg("%s", " disconnect :entering..........");
if (!serial) {
- dbg("%s", "Invalid Handler \n");
+ dbg("%s", "Invalid Handler");
return;
}
@@ -2656,14 +2662,45 @@
mos7840_port->zombie = 1;
spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
usb_kill_urb(mos7840_port->control_urb);
+ }
+ }
+
+ dbg("%s", "Thank u :: ");
+
+}
+
+/****************************************************************************
+ * mos7840_release
+ * This function is called when the usb_serial structure is freed.
+ ****************************************************************************/
+
+static void mos7840_release(struct usb_serial *serial)
+{
+ int i;
+ struct moschip_port *mos7840_port;
+ dbg("%s", " release :entering..........");
+
+ if (!serial) {
+ dbg("%s", "Invalid Handler");
+ return;
+ }
+
+ /* check for the ports to be closed,close the ports and disconnect */
+
+ /* free private structure allocated for serial port *
+ * stop reads and writes on all ports */
+
+ for (i = 0; i < serial->num_ports; ++i) {
+ mos7840_port = mos7840_get_port_private(serial->port[i]);
+ dbg("mos7840_port %d = %p", i, mos7840_port);
+ if (mos7840_port) {
kfree(mos7840_port->ctrl_buf);
kfree(mos7840_port->dr);
kfree(mos7840_port);
}
- mos7840_set_port_private(serial->port[i], NULL);
}
- dbg("%s\n", "Thank u :: ");
+ dbg("%s", "Thank u :: ");
}
@@ -2701,7 +2738,8 @@
.tiocmget = mos7840_tiocmget,
.tiocmset = mos7840_tiocmset,
.attach = mos7840_startup,
- .shutdown = mos7840_shutdown,
+ .disconnect = mos7840_disconnect,
+ .release = mos7840_release,
.read_bulk_callback = mos7840_bulk_in_callback,
.read_int_callback = mos7840_interrupt_callback,
};
@@ -2714,7 +2752,7 @@
{
int retval;
- dbg("%s \n", " mos7840_init :entering..........");
+ dbg("%s", " mos7840_init :entering..........");
/* Register with the usb serial */
retval = usb_serial_register(&moschip7840_4port_device);
@@ -2722,14 +2760,14 @@
if (retval)
goto failed_port_device_register;
- dbg("%s\n", "Entring...");
+ dbg("%s", "Entering...");
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
DRIVER_DESC "\n");
/* Register with the usb */
retval = usb_register(&io_driver);
if (retval == 0) {
- dbg("%s\n", "Leaving...");
+ dbg("%s", "Leaving...");
return 0;
}
usb_serial_deregister(&moschip7840_4port_device);
@@ -2744,13 +2782,13 @@
static void __exit moschip7840_exit(void)
{
- dbg("%s \n", " mos7840_exit :entering..........");
+ dbg("%s", " mos7840_exit :entering..........");
usb_deregister(&io_driver);
usb_serial_deregister(&moschip7840_4port_device);
- dbg("%s\n", "Entring...");
+ dbg("%s", "Entering...");
}
module_init(moschip7840_init);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 1104617..56857dd 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -72,7 +72,8 @@
static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int omninet_write_room(struct tty_struct *tty);
-static void omninet_shutdown(struct usb_serial *serial);
+static void omninet_disconnect(struct usb_serial *serial);
+static void omninet_release(struct usb_serial *serial);
static int omninet_attach(struct usb_serial *serial);
static struct usb_device_id id_table[] = {
@@ -108,7 +109,8 @@
.write_room = omninet_write_room,
.read_bulk_callback = omninet_read_bulk_callback,
.write_bulk_callback = omninet_write_bulk_callback,
- .shutdown = omninet_shutdown,
+ .disconnect = omninet_disconnect,
+ .release = omninet_release,
};
@@ -345,13 +347,22 @@
}
-static void omninet_shutdown(struct usb_serial *serial)
+static void omninet_disconnect(struct usb_serial *serial)
{
struct usb_serial_port *wport = serial->port[1];
- struct usb_serial_port *port = serial->port[0];
+
dbg("%s", __func__);
usb_kill_urb(wport->write_urb);
+}
+
+
+static void omninet_release(struct usb_serial *serial)
+{
+ struct usb_serial_port *port = serial->port[0];
+
+ dbg("%s", __func__);
+
kfree(usb_get_serial_port_data(port));
}
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index c20480a..336bba7 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -463,7 +463,7 @@
return retval;
}
-static void opticon_shutdown(struct usb_serial *serial)
+static void opticon_disconnect(struct usb_serial *serial)
{
struct opticon_private *priv = usb_get_serial_data(serial);
@@ -471,9 +471,16 @@
usb_kill_urb(priv->bulk_read_urb);
usb_free_urb(priv->bulk_read_urb);
+}
+
+static void opticon_release(struct usb_serial *serial)
+{
+ struct opticon_private *priv = usb_get_serial_data(serial);
+
+ dbg("%s", __func__);
+
kfree(priv->bulk_in_buffer);
kfree(priv);
- usb_set_serial_data(serial, NULL);
}
static int opticon_suspend(struct usb_interface *intf, pm_message_t message)
@@ -524,7 +531,8 @@
.close = opticon_close,
.write = opticon_write,
.write_room = opticon_write_room,
- .shutdown = opticon_shutdown,
+ .disconnect = opticon_disconnect,
+ .release = opticon_release,
.throttle = opticon_throttle,
.unthrottle = opticon_unthrottle,
.ioctl = opticon_ioctl,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a16d69f..575816e 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -43,13 +43,16 @@
#include <linux/usb/serial.h>
/* Function prototypes */
+static int option_probe(struct usb_serial *serial,
+ const struct usb_device_id *id);
static int option_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
static void option_close(struct usb_serial_port *port);
static void option_dtr_rts(struct usb_serial_port *port, int on);
static int option_startup(struct usb_serial *serial);
-static void option_shutdown(struct usb_serial *serial);
+static void option_disconnect(struct usb_serial *serial);
+static void option_release(struct usb_serial *serial);
static int option_write_room(struct tty_struct *tty);
static void option_instat_callback(struct urb *urb);
@@ -202,9 +205,9 @@
#define NOVATELWIRELESS_PRODUCT_MC727 0x4100
#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400
#define NOVATELWIRELESS_PRODUCT_U727 0x5010
+#define NOVATELWIRELESS_PRODUCT_MC760 0x6000
/* FUTURE NOVATEL PRODUCTS */
-#define NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED 0X6000
#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED 0X6001
#define NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED 0X7000
#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED 0X7001
@@ -305,6 +308,10 @@
#define DLINK_PRODUCT_DWM_652 0x3e04
+/* TOSHIBA PRODUCTS */
+#define TOSHIBA_VENDOR_ID 0x0930
+#define TOSHIBA_PRODUCT_HSDPA_MINICARD 0x1302
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -422,7 +429,7 @@
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED) }, /* Novatel EVDO product */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */
@@ -523,6 +530,7 @@
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
+ { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
@@ -550,6 +558,7 @@
.usb_driver = &option_driver,
.id_table = option_ids,
.num_ports = 1,
+ .probe = option_probe,
.open = option_open,
.close = option_close,
.dtr_rts = option_dtr_rts,
@@ -560,7 +569,8 @@
.tiocmget = option_tiocmget,
.tiocmset = option_tiocmset,
.attach = option_startup,
- .shutdown = option_shutdown,
+ .disconnect = option_disconnect,
+ .release = option_release,
.read_int_callback = option_instat_callback,
.suspend = option_suspend,
.resume = option_resume,
@@ -626,6 +636,18 @@
module_init(option_init);
module_exit(option_exit);
+static int option_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+ /* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */
+ if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID &&
+ serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 &&
+ serial->interface->cur_altsetting->desc.bInterfaceClass == 0x8)
+ return -ENODEV;
+
+ return 0;
+}
+
static void option_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
@@ -1129,7 +1151,14 @@
}
}
-static void option_shutdown(struct usb_serial *serial)
+static void option_disconnect(struct usb_serial *serial)
+{
+ dbg("%s", __func__);
+
+ stop_read_write_urbs(serial);
+}
+
+static void option_release(struct usb_serial *serial)
{
int i, j;
struct usb_serial_port *port;
@@ -1137,8 +1166,6 @@
dbg("%s", __func__);
- stop_read_write_urbs(serial);
-
/* Now free them */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 7de5478..3cece27 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -159,7 +159,7 @@
static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int oti6858_startup(struct usb_serial *serial);
-static void oti6858_shutdown(struct usb_serial *serial);
+static void oti6858_release(struct usb_serial *serial);
/* functions operating on buffers */
static struct oti6858_buf *oti6858_buf_alloc(unsigned int size);
@@ -194,7 +194,7 @@
.write_room = oti6858_write_room,
.chars_in_buffer = oti6858_chars_in_buffer,
.attach = oti6858_startup,
- .shutdown = oti6858_shutdown,
+ .release = oti6858_release,
};
struct oti6858_private {
@@ -782,7 +782,7 @@
}
-static void oti6858_shutdown(struct usb_serial *serial)
+static void oti6858_release(struct usb_serial *serial)
{
struct oti6858_private *priv;
int i;
@@ -794,7 +794,6 @@
if (priv) {
oti6858_buf_free(priv->buf);
kfree(priv);
- usb_set_serial_port_data(serial->port[i], NULL);
}
}
}
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index e02dc3d..ec6c132 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -878,7 +878,7 @@
dbg("%s - error sending break = %d", __func__, result);
}
-static void pl2303_shutdown(struct usb_serial *serial)
+static void pl2303_release(struct usb_serial *serial)
{
int i;
struct pl2303_private *priv;
@@ -890,7 +890,6 @@
if (priv) {
pl2303_buf_free(priv->buf);
kfree(priv);
- usb_set_serial_port_data(serial->port[i], NULL);
}
}
}
@@ -927,6 +926,8 @@
spin_lock_irqsave(&priv->lock, flags);
priv->line_status = data[status_idx];
spin_unlock_irqrestore(&priv->lock, flags);
+ if (priv->line_status & UART_BREAK_ERROR)
+ usb_serial_handle_break(port);
wake_up_interruptible(&priv->delta_msr_wait);
}
@@ -1037,7 +1038,8 @@
if (line_status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
for (i = 0; i < urb->actual_length; ++i)
- tty_insert_flip_char(tty, data[i], tty_flag);
+ if (!usb_serial_handle_sysrq_char(port, data[i]))
+ tty_insert_flip_char(tty, data[i], tty_flag);
tty_flip_buffer_push(tty);
}
tty_kref_put(tty);
@@ -1120,7 +1122,7 @@
.write_room = pl2303_write_room,
.chars_in_buffer = pl2303_chars_in_buffer,
.attach = pl2303_startup,
- .shutdown = pl2303_shutdown,
+ .release = pl2303_release,
};
static int __init pl2303_init(void)
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 17ac34f..032f7ae 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -1,7 +1,10 @@
/*
USB Driver for Sierra Wireless
- Copyright (C) 2006, 2007, 2008 Kevin Lloyd <klloyd@sierrawireless.com>
+ Copyright (C) 2006, 2007, 2008 Kevin Lloyd <klloyd@sierrawireless.com>,
+
+ Copyright (C) 2008, 2009 Elina Pasheva, Matthew Safar, Rory Filer
+ <linux@sierrawireless.com>
IMPORTANT DISCLAIMER: This driver is not commercially supported by
Sierra Wireless. Use at your own risk.
@@ -14,8 +17,8 @@
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
*/
-#define DRIVER_VERSION "v.1.3.3"
-#define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
+#define DRIVER_VERSION "v.1.3.7"
+#define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
#include <linux/kernel.h>
@@ -30,10 +33,15 @@
#define SWIMS_USB_REQUEST_SetPower 0x00
#define SWIMS_USB_REQUEST_SetNmea 0x07
-#define N_IN_URB 4
-#define N_OUT_URB 4
+#define N_IN_URB 8
+#define N_OUT_URB 64
#define IN_BUFLEN 4096
+#define MAX_TRANSFER (PAGE_SIZE - 512)
+/* MAX_TRANSFER is chosen so that the VM is not stressed by
+ allocations > PAGE_SIZE and the number of packets in a page
+ is an integer 512 is the largest possible packet on EHCI */
+
static int debug;
static int nmea;
@@ -46,7 +54,7 @@
static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
{
int result;
- dev_dbg(&udev->dev, "%s", __func__);
+ dev_dbg(&udev->dev, "%s\n", __func__);
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
SWIMS_USB_REQUEST_SetPower, /* __u8 request */
USB_TYPE_VENDOR, /* __u8 request type */
@@ -61,7 +69,7 @@
static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
{
int result;
- dev_dbg(&udev->dev, "%s", __func__);
+ dev_dbg(&udev->dev, "%s\n", __func__);
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
SWIMS_USB_REQUEST_SetNmea, /* __u8 request */
USB_TYPE_VENDOR, /* __u8 request type */
@@ -75,18 +83,22 @@
static int sierra_calc_num_ports(struct usb_serial *serial)
{
- int result;
- int *num_ports = usb_get_serial_data(serial);
- dev_dbg(&serial->dev->dev, "%s", __func__);
+ int num_ports = 0;
+ u8 ifnum, numendpoints;
- result = *num_ports;
+ dev_dbg(&serial->dev->dev, "%s\n", __func__);
- if (result) {
- kfree(num_ports);
- usb_set_serial_data(serial, NULL);
- }
+ ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+ numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints;
- return result;
+ /* Dummy interface present on some SKUs should be ignored */
+ if (ifnum == 0x99)
+ num_ports = 0;
+ else if (numendpoints <= 3)
+ num_ports = 1;
+ else
+ num_ports = (numendpoints-1)/2;
+ return num_ports;
}
static int is_blacklisted(const u8 ifnum,
@@ -111,7 +123,7 @@
int interface;
struct usb_interface *p_interface;
struct usb_host_interface *p_host_interface;
- dev_dbg(&serial->dev->dev, "%s", __func__);
+ dev_dbg(&serial->dev->dev, "%s\n", __func__);
/* Get the interface structure pointer from the serial struct */
p_interface = serial->interface;
@@ -132,23 +144,12 @@
{
int result = 0;
struct usb_device *udev;
- int *num_ports;
u8 ifnum;
- u8 numendpoints;
- dev_dbg(&serial->dev->dev, "%s", __func__);
-
- num_ports = kmalloc(sizeof(*num_ports), GFP_KERNEL);
- if (!num_ports)
- return -ENOMEM;
-
- ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
- numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints;
udev = serial->dev;
+ dev_dbg(&udev->dev, "%s\n", __func__);
- /* Figure out the interface number from the serial structure */
ifnum = sierra_calc_interface(serial);
-
/*
* If this interface supports more than 1 alternate
* select the 2nd one
@@ -160,20 +161,6 @@
usb_set_interface(udev, ifnum, 1);
}
- /* Dummy interface present on some SKUs should be ignored */
- if (ifnum == 0x99)
- *num_ports = 0;
- else if (numendpoints <= 3)
- *num_ports = 1;
- else
- *num_ports = (numendpoints-1)/2;
-
- /*
- * save off our num_ports info so that we can use it in the
- * calc_num_ports callback
- */
- usb_set_serial_data(serial, (void *)num_ports);
-
/* ifnum could have changed - by calling usb_set_interface */
ifnum = sierra_calc_interface(serial);
@@ -289,7 +276,7 @@
__u16 interface = 0;
int val = 0;
- dev_dbg(&port->dev, "%s", __func__);
+ dev_dbg(&port->dev, "%s\n", __func__);
portdata = usb_get_serial_port_data(port);
@@ -332,7 +319,7 @@
static void sierra_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
- dev_dbg(&port->dev, "%s", __func__);
+ dev_dbg(&port->dev, "%s\n", __func__);
tty_termios_copy_hw(tty->termios, old_termios);
sierra_send_setup(port);
}
@@ -343,7 +330,7 @@
unsigned int value;
struct sierra_port_private *portdata;
- dev_dbg(&port->dev, "%s", __func__);
+ dev_dbg(&port->dev, "%s\n", __func__);
portdata = usb_get_serial_port_data(port);
value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
@@ -394,14 +381,14 @@
int status = urb->status;
unsigned long flags;
- dev_dbg(&port->dev, "%s - port %d", __func__, port->number);
+ dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
/* free up the transfer buffer, as usb_free_urb() does not do this */
kfree(urb->transfer_buffer);
if (status)
dev_dbg(&port->dev, "%s - nonzero write bulk status "
- "received: %d", __func__, status);
+ "received: %d\n", __func__, status);
spin_lock_irqsave(&portdata->lock, flags);
--portdata->outstanding_urbs;
@@ -419,50 +406,61 @@
unsigned long flags;
unsigned char *buffer;
struct urb *urb;
- int status;
+ size_t writesize = min((size_t)count, (size_t)MAX_TRANSFER);
+ int retval = 0;
+
+ /* verify that we actually have some data to write */
+ if (count == 0)
+ return 0;
portdata = usb_get_serial_port_data(port);
- dev_dbg(&port->dev, "%s: write (%d chars)", __func__, count);
+ dev_dbg(&port->dev, "%s: write (%zd bytes)\n", __func__, writesize);
spin_lock_irqsave(&portdata->lock, flags);
+ dev_dbg(&port->dev, "%s - outstanding_urbs: %d\n", __func__,
+ portdata->outstanding_urbs);
if (portdata->outstanding_urbs > N_OUT_URB) {
spin_unlock_irqrestore(&portdata->lock, flags);
dev_dbg(&port->dev, "%s - write limit hit\n", __func__);
return 0;
}
portdata->outstanding_urbs++;
+ dev_dbg(&port->dev, "%s - 1, outstanding_urbs: %d\n", __func__,
+ portdata->outstanding_urbs);
spin_unlock_irqrestore(&portdata->lock, flags);
- buffer = kmalloc(count, GFP_ATOMIC);
+ buffer = kmalloc(writesize, GFP_ATOMIC);
if (!buffer) {
dev_err(&port->dev, "out of memory\n");
- count = -ENOMEM;
+ retval = -ENOMEM;
goto error_no_buffer;
}
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
dev_err(&port->dev, "no more free urbs\n");
- count = -ENOMEM;
+ retval = -ENOMEM;
goto error_no_urb;
}
- memcpy(buffer, buf, count);
+ memcpy(buffer, buf, writesize);
- usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, writesize, buffer);
usb_fill_bulk_urb(urb, serial->dev,
usb_sndbulkpipe(serial->dev,
port->bulk_out_endpointAddress),
- buffer, count, sierra_outdat_callback, port);
+ buffer, writesize, sierra_outdat_callback, port);
+
+ /* Handle the need to send a zero length packet */
+ urb->transfer_flags |= URB_ZERO_PACKET;
/* send it down the pipe */
- status = usb_submit_urb(urb, GFP_ATOMIC);
- if (status) {
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval) {
dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
- "with status = %d\n", __func__, status);
- count = status;
+ "with status = %d\n", __func__, retval);
goto error;
}
@@ -470,7 +468,7 @@
* really free it when it is finished with it */
usb_free_urb(urb);
- return count;
+ return writesize;
error:
usb_free_urb(urb);
error_no_urb:
@@ -478,8 +476,10 @@
error_no_buffer:
spin_lock_irqsave(&portdata->lock, flags);
--portdata->outstanding_urbs;
+ dev_dbg(&port->dev, "%s - 2. outstanding_urbs: %d\n", __func__,
+ portdata->outstanding_urbs);
spin_unlock_irqrestore(&portdata->lock, flags);
- return count;
+ return retval;
}
static void sierra_indat_callback(struct urb *urb)
@@ -491,33 +491,39 @@
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
- dbg("%s: %p", __func__, urb);
-
endpoint = usb_pipeendpoint(urb->pipe);
- port = urb->context;
+ port = urb->context;
+
+ dev_dbg(&port->dev, "%s: %p\n", __func__, urb);
if (status) {
dev_dbg(&port->dev, "%s: nonzero status: %d on"
- " endpoint %02x.", __func__, status, endpoint);
+ " endpoint %02x\n", __func__, status, endpoint);
} else {
if (urb->actual_length) {
tty = tty_port_tty_get(&port->port);
+
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- } else
- dev_dbg(&port->dev, "%s: empty read urb"
- " received", __func__);
- /* Resubmit urb so we continue receiving */
- if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err)
- dev_err(&port->dev, "resubmit read urb failed."
- "(%d)\n", err);
+ tty_kref_put(tty);
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ urb->actual_length, data);
+ } else {
+ dev_dbg(&port->dev, "%s: empty read urb"
+ " received\n", __func__);
}
}
+
+ /* Resubmit urb so we continue receiving */
+ if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err)
+ dev_err(&port->dev, "resubmit read urb failed."
+ "(%d)\n", err);
+ }
+
return;
}
@@ -529,8 +535,7 @@
struct sierra_port_private *portdata = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
- dev_dbg(&port->dev, "%s", __func__);
- dev_dbg(&port->dev, "%s: urb %p port %p has data %p", __func__,
+ dev_dbg(&port->dev, "%s: urb %p port %p has data %p\n", __func__,
urb, port, portdata);
if (status == 0) {
@@ -550,7 +555,7 @@
sizeof(struct usb_ctrlrequest));
struct tty_struct *tty;
- dev_dbg(&port->dev, "%s: signal x%x", __func__,
+ dev_dbg(&port->dev, "%s: signal x%x\n", __func__,
signals);
old_dcd_state = portdata->dcd_state;
@@ -565,20 +570,20 @@
tty_hangup(tty);
tty_kref_put(tty);
} else {
- dev_dbg(&port->dev, "%s: type %x req %x",
+ dev_dbg(&port->dev, "%s: type %x req %x\n",
__func__, req_pkt->bRequestType,
req_pkt->bRequest);
}
} else
- dev_dbg(&port->dev, "%s: error %d", __func__, status);
+ dev_dbg(&port->dev, "%s: error %d\n", __func__, status);
/* Resubmit urb so we continue receiving IRQ data */
- if (status != -ESHUTDOWN) {
+ if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) {
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
- dev_dbg(&port->dev, "%s: resubmit intr urb "
- "failed. (%d)", __func__, err);
+ dev_err(&port->dev, "%s: resubmit intr urb "
+ "failed. (%d)\n", __func__, err);
}
}
@@ -588,7 +593,7 @@
struct sierra_port_private *portdata = usb_get_serial_port_data(port);
unsigned long flags;
- dev_dbg(&port->dev, "%s - port %d", __func__, port->number);
+ dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
/* try to give a good number back based on if we have any free urbs at
* this point in time */
@@ -729,7 +734,7 @@
portdata = usb_get_serial_port_data(port);
- dev_dbg(&port->dev, "%s", __func__);
+ dev_dbg(&port->dev, "%s\n", __func__);
/* Set some sane defaults */
portdata->rts_state = 1;
@@ -782,7 +787,7 @@
struct sierra_port_private *portdata;
int i;
- dev_dbg(&serial->dev->dev, "%s", __func__);
+ dev_dbg(&serial->dev->dev, "%s\n", __func__);
/* Set Device mode to D0 */
sierra_set_power_state(serial->dev, 0x0000);
@@ -797,7 +802,7 @@
portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
if (!portdata) {
dev_dbg(&port->dev, "%s: kmalloc for "
- "sierra_port_private (%d) failed!.",
+ "sierra_port_private (%d) failed!.\n",
__func__, i);
return -ENOMEM;
}
@@ -809,13 +814,13 @@
return 0;
}
-static void sierra_shutdown(struct usb_serial *serial)
+static void sierra_disconnect(struct usb_serial *serial)
{
int i;
struct usb_serial_port *port;
struct sierra_port_private *portdata;
- dev_dbg(&serial->dev->dev, "%s", __func__);
+ dev_dbg(&serial->dev->dev, "%s\n", __func__);
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
@@ -848,7 +853,7 @@
.tiocmget = sierra_tiocmget,
.tiocmset = sierra_tiocmset,
.attach = sierra_startup,
- .shutdown = sierra_shutdown,
+ .disconnect = sierra_disconnect,
.read_int_callback = sierra_instat_callback,
};
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 8f7ed8f..3c249d8 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -356,7 +356,7 @@
}
/* call when the device plug out. free all the memory alloced by probe */
-static void spcp8x5_shutdown(struct usb_serial *serial)
+static void spcp8x5_release(struct usb_serial *serial)
{
int i;
struct spcp8x5_private *priv;
@@ -366,7 +366,6 @@
if (priv) {
free_ringbuf(priv->buf);
kfree(priv);
- usb_set_serial_port_data(serial->port[i] , NULL);
}
}
}
@@ -1020,7 +1019,7 @@
.write_bulk_callback = spcp8x5_write_bulk_callback,
.chars_in_buffer = spcp8x5_chars_in_buffer,
.attach = spcp8x5_startup,
- .shutdown = spcp8x5_shutdown,
+ .release = spcp8x5_release,
};
static int __init spcp8x5_init(void)
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 8b07ebc..6157fac 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -267,7 +267,7 @@
return retval;
}
-static void symbol_shutdown(struct usb_serial *serial)
+static void symbol_disconnect(struct usb_serial *serial)
{
struct symbol_private *priv = usb_get_serial_data(serial);
@@ -275,9 +275,16 @@
usb_kill_urb(priv->int_urb);
usb_free_urb(priv->int_urb);
+}
+
+static void symbol_release(struct usb_serial *serial)
+{
+ struct symbol_private *priv = usb_get_serial_data(serial);
+
+ dbg("%s", __func__);
+
kfree(priv->int_buffer);
kfree(priv);
- usb_set_serial_data(serial, NULL);
}
static struct usb_driver symbol_driver = {
@@ -299,7 +306,8 @@
.attach = symbol_startup,
.open = symbol_open,
.close = symbol_close,
- .shutdown = symbol_shutdown,
+ .disconnect = symbol_disconnect,
+ .release = symbol_release,
.throttle = symbol_throttle,
.unthrottle = symbol_unthrottle,
};
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 42cb04c..991d823 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -97,7 +97,7 @@
/* Function Declarations */
static int ti_startup(struct usb_serial *serial);
-static void ti_shutdown(struct usb_serial *serial);
+static void ti_release(struct usb_serial *serial);
static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *file);
static void ti_close(struct usb_serial_port *port);
@@ -230,7 +230,7 @@
.id_table = ti_id_table_3410,
.num_ports = 1,
.attach = ti_startup,
- .shutdown = ti_shutdown,
+ .release = ti_release,
.open = ti_open,
.close = ti_close,
.write = ti_write,
@@ -258,7 +258,7 @@
.id_table = ti_id_table_5052,
.num_ports = 2,
.attach = ti_startup,
- .shutdown = ti_shutdown,
+ .release = ti_release,
.open = ti_open,
.close = ti_close,
.write = ti_write,
@@ -473,7 +473,7 @@
}
-static void ti_shutdown(struct usb_serial *serial)
+static void ti_release(struct usb_serial *serial)
{
int i;
struct ti_device *tdev = usb_get_serial_data(serial);
@@ -486,12 +486,10 @@
if (tport) {
ti_buf_free(tport->tp_write_buf);
kfree(tport);
- usb_set_serial_port_data(serial->port[i], NULL);
}
}
kfree(tdev);
- usb_set_serial_data(serial, NULL);
}
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 1967a7e..d595aa5 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -141,6 +141,14 @@
if (serial->minor != SERIAL_TTY_NO_MINOR)
return_serial(serial);
+ serial->type->release(serial);
+
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ if (port)
+ put_device(&port->dev);
+ }
+
/* If this is a "fake" port, we have to clean it up here, as it will
* not get cleaned up in port_release() as it was never registered with
* the driver core */
@@ -148,9 +156,8 @@
for (i = serial->num_ports;
i < serial->num_port_pointers; ++i) {
port = serial->port[i];
- if (!port)
- continue;
- port_free(port);
+ if (port)
+ port_free(port);
}
}
@@ -1046,10 +1053,15 @@
dev_set_name(&port->dev, "ttyUSB%d", port->number);
dbg ("%s - registering %s", __func__, dev_name(&port->dev));
+ port->dev_state = PORT_REGISTERING;
retval = device_register(&port->dev);
- if (retval)
+ if (retval) {
dev_err(&port->dev, "Error registering port device, "
"continuing\n");
+ port->dev_state = PORT_UNREGISTERED;
+ } else {
+ port->dev_state = PORT_REGISTERED;
+ }
}
usb_serial_console_init(debug, minor);
@@ -1113,10 +1125,6 @@
serial->disconnected = 1;
mutex_unlock(&serial->disc_mutex);
- /* Unfortunately, many of the sub-drivers expect the port structures
- * to exist when their shutdown method is called, so we have to go
- * through this awkward two-step unregistration procedure.
- */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
if (port) {
@@ -1130,17 +1138,25 @@
}
kill_traffic(port);
cancel_work_sync(&port->work);
- device_del(&port->dev);
+ if (port->dev_state == PORT_REGISTERED) {
+
+ /* Make sure the port is bound so that the
+ * driver's port_remove method is called.
+ */
+ if (!port->dev.driver) {
+ int rc;
+
+ port->dev.driver =
+ &serial->type->driver;
+ rc = device_bind_driver(&port->dev);
+ }
+ port->dev_state = PORT_UNREGISTERING;
+ device_del(&port->dev);
+ port->dev_state = PORT_UNREGISTERED;
+ }
}
}
- serial->type->shutdown(serial);
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- if (port) {
- put_device(&port->dev);
- serial->port[i] = NULL;
- }
- }
+ serial->type->disconnect(serial);
/* let the last holder of this object
* cause it to be cleaned up */
@@ -1318,7 +1334,8 @@
set_to_generic_if_null(device, chars_in_buffer);
set_to_generic_if_null(device, read_bulk_callback);
set_to_generic_if_null(device, write_bulk_callback);
- set_to_generic_if_null(device, shutdown);
+ set_to_generic_if_null(device, disconnect);
+ set_to_generic_if_null(device, release);
}
int usb_serial_register(struct usb_serial_driver *driver)
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 6c9cbb5..6148009 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -15,7 +15,19 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#define URB_DEBUG_MAX_IN_FLIGHT_URBS 4000
#define USB_DEBUG_MAX_PACKET_SIZE 8
+#define USB_DEBUG_BRK_SIZE 8
+static char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = {
+ 0x00,
+ 0xff,
+ 0x01,
+ 0xfe,
+ 0x00,
+ 0xfe,
+ 0x01,
+ 0xff,
+};
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0525, 0x127a) },
@@ -38,6 +50,32 @@
return usb_serial_generic_open(tty, port, filp);
}
+/* This HW really does not support a serial break, so one will be
+ * emulated when ever the break state is set to true.
+ */
+static void usb_debug_break_ctl(struct tty_struct *tty, int break_state)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ if (!break_state)
+ return;
+ usb_serial_generic_write(tty, port, USB_DEBUG_BRK, USB_DEBUG_BRK_SIZE);
+}
+
+static void usb_debug_read_bulk_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+
+ if (urb->actual_length == USB_DEBUG_BRK_SIZE &&
+ memcmp(urb->transfer_buffer, USB_DEBUG_BRK,
+ USB_DEBUG_BRK_SIZE) == 0) {
+ usb_serial_handle_break(port);
+ usb_serial_generic_resubmit_read_urb(port, GFP_ATOMIC);
+ return;
+ }
+
+ usb_serial_generic_read_bulk_callback(urb);
+}
+
static struct usb_serial_driver debug_device = {
.driver = {
.owner = THIS_MODULE,
@@ -46,6 +84,9 @@
.id_table = id_table,
.num_ports = 1,
.open = usb_debug_open,
+ .max_in_flight_urbs = URB_DEBUG_MAX_IN_FLIGHT_URBS,
+ .break_ctl = usb_debug_break_ctl,
+ .read_bulk_callback = usb_debug_read_bulk_callback,
};
static int __init debug_init(void)
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index b15f1c0..f5d0f64 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -47,7 +47,7 @@
static int visor_probe(struct usb_serial *serial,
const struct usb_device_id *id);
static int visor_calc_num_ports(struct usb_serial *serial);
-static void visor_shutdown(struct usb_serial *serial);
+static void visor_release(struct usb_serial *serial);
static void visor_write_bulk_callback(struct urb *urb);
static void visor_read_bulk_callback(struct urb *urb);
static void visor_read_int_callback(struct urb *urb);
@@ -202,7 +202,7 @@
.attach = treo_attach,
.probe = visor_probe,
.calc_num_ports = visor_calc_num_ports,
- .shutdown = visor_shutdown,
+ .release = visor_release,
.write = visor_write,
.write_room = visor_write_room,
.write_bulk_callback = visor_write_bulk_callback,
@@ -227,7 +227,7 @@
.attach = clie_5_attach,
.probe = visor_probe,
.calc_num_ports = visor_calc_num_ports,
- .shutdown = visor_shutdown,
+ .release = visor_release,
.write = visor_write,
.write_room = visor_write_room,
.write_bulk_callback = visor_write_bulk_callback,
@@ -918,7 +918,7 @@
return generic_startup(serial);
}
-static void visor_shutdown(struct usb_serial *serial)
+static void visor_release(struct usb_serial *serial)
{
struct visor_private *priv;
int i;
@@ -927,10 +927,7 @@
for (i = 0; i < serial->num_ports; i++) {
priv = usb_get_serial_port_data(serial->port[i]);
- if (priv) {
- usb_set_serial_port_data(serial->port[i], NULL);
- kfree(priv);
- }
+ kfree(priv);
}
}
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 7c7295d..8d126dd 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -144,7 +144,7 @@
/* function prototypes for the Connect Tech WhiteHEAT serial converter */
static int whiteheat_attach(struct usb_serial *serial);
-static void whiteheat_shutdown(struct usb_serial *serial);
+static void whiteheat_release(struct usb_serial *serial);
static int whiteheat_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void whiteheat_close(struct usb_serial_port *port);
@@ -189,7 +189,7 @@
.id_table = id_table_std,
.num_ports = 4,
.attach = whiteheat_attach,
- .shutdown = whiteheat_shutdown,
+ .release = whiteheat_release,
.open = whiteheat_open,
.close = whiteheat_close,
.write = whiteheat_write,
@@ -617,7 +617,7 @@
}
-static void whiteheat_shutdown(struct usb_serial *serial)
+static void whiteheat_release(struct usb_serial *serial)
{
struct usb_serial_port *command_port;
struct usb_serial_port *port;
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 2dd9bd4..ec17c96 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -52,7 +52,7 @@
us->iobuf[0] = 0x1;
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
- 0x01, 0x0, us->iobuf, 0x1, 5*HZ);
+ 0x01, 0x0, us->iobuf, 0x1, 5000);
US_DEBUGP("-- result is %d\n", result);
return 0;
@@ -80,14 +80,16 @@
res = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb,
US_BULK_CB_WRAP_LEN, &partial);
- if(res)
- return res;
+ if (res)
+ return -EIO;
US_DEBUGP("Getting status packet...\n");
res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
US_BULK_CS_WRAP_LEN, &partial);
+ if (res)
+ return -EIO;
- return (res ? -1 : 0);
+ return 0;
}
/* This places the HUAWEI E220 devices in multi-port mode */
@@ -99,6 +101,6 @@
USB_REQ_SET_FEATURE,
USB_TYPE_STANDARD | USB_RECIP_DEVICE,
0x01, 0x0, NULL, 0x0, 1000);
- US_DEBUGP("usb_control_msg performing result is %d\n", result);
- return (result ? 0 : -1);
+ US_DEBUGP("Huawei mode set result is %d\n", result);
+ return (result ? 0 : -ENODEV);
}
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
index 353f922..d41cc0a 100644
--- a/drivers/usb/storage/option_ms.c
+++ b/drivers/usb/storage/option_ms.c
@@ -37,7 +37,7 @@
#define RESPONSE_LEN 1024
-static int option_rezero(struct us_data *us, int ep_in, int ep_out)
+static int option_rezero(struct us_data *us)
{
const unsigned char rezero_msg[] = {
0x55, 0x53, 0x42, 0x43, 0x78, 0x56, 0x34, 0x12,
@@ -54,10 +54,10 @@
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR;
- memcpy(buffer, rezero_msg, sizeof (rezero_msg));
+ memcpy(buffer, rezero_msg, sizeof(rezero_msg));
result = usb_stor_bulk_transfer_buf(us,
- usb_sndbulkpipe(us->pusb_dev, ep_out),
- buffer, sizeof (rezero_msg), NULL);
+ us->send_bulk_pipe,
+ buffer, sizeof(rezero_msg), NULL);
if (result != USB_STOR_XFER_GOOD) {
result = USB_STOR_XFER_ERROR;
goto out;
@@ -66,9 +66,15 @@
/* Some of the devices need to be asked for a response, but we don't
* care what that response is.
*/
- result = usb_stor_bulk_transfer_buf(us,
- usb_sndbulkpipe(us->pusb_dev, ep_out),
+ usb_stor_bulk_transfer_buf(us,
+ us->recv_bulk_pipe,
buffer, RESPONSE_LEN, NULL);
+
+ /* Read the CSW */
+ usb_stor_bulk_transfer_buf(us,
+ us->recv_bulk_pipe,
+ buffer, 13, NULL);
+
result = USB_STOR_XFER_GOOD;
out:
@@ -76,63 +82,75 @@
return result;
}
+static int option_inquiry(struct us_data *us)
+{
+ const unsigned char inquiry_msg[] = {
+ 0x55, 0x53, 0x42, 0x43, 0x12, 0x34, 0x56, 0x78,
+ 0x24, 0x00, 0x00, 0x00, 0x80, 0x00, 0x06, 0x12,
+ 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+ char *buffer;
+ int result;
+
+ US_DEBUGP("Option MS: %s", "device inquiry for vendor name\n");
+
+ buffer = kzalloc(0x24, GFP_KERNEL);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ memcpy(buffer, inquiry_msg, sizeof(inquiry_msg));
+ result = usb_stor_bulk_transfer_buf(us,
+ us->send_bulk_pipe,
+ buffer, sizeof(inquiry_msg), NULL);
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_XFER_ERROR;
+ goto out;
+ }
+
+ result = usb_stor_bulk_transfer_buf(us,
+ us->recv_bulk_pipe,
+ buffer, 0x24, NULL);
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_XFER_ERROR;
+ goto out;
+ }
+
+ result = memcmp(buffer+8, "Option", 6);
+
+ /* Read the CSW */
+ usb_stor_bulk_transfer_buf(us,
+ us->recv_bulk_pipe,
+ buffer, 13, NULL);
+
+out:
+ kfree(buffer);
+ return result;
+}
+
+
int option_ms_init(struct us_data *us)
{
- struct usb_device *udev;
- struct usb_interface *intf;
- struct usb_host_interface *iface_desc;
- struct usb_endpoint_descriptor *endpoint = NULL;
- u8 ep_in = 0, ep_out = 0;
- int ep_in_size = 0, ep_out_size = 0;
- int i, result;
-
- udev = us->pusb_dev;
- intf = us->pusb_intf;
-
- /* Ensure it's really a ZeroCD device; devices that are already
- * in modem mode return 0xFF for class, subclass, and protocol.
- */
- if (udev->descriptor.bDeviceClass != 0 ||
- udev->descriptor.bDeviceSubClass != 0 ||
- udev->descriptor.bDeviceProtocol != 0)
- return USB_STOR_TRANSPORT_GOOD;
+ int result;
US_DEBUGP("Option MS: option_ms_init called\n");
- /* Find the right mass storage interface */
- iface_desc = intf->cur_altsetting;
- if (iface_desc->desc.bInterfaceClass != 0x8 ||
- iface_desc->desc.bInterfaceSubClass != 0x6 ||
- iface_desc->desc.bInterfaceProtocol != 0x50) {
- US_DEBUGP("Option MS: mass storage interface not found, no action "
- "required\n");
- return USB_STOR_TRANSPORT_GOOD;
- }
-
- /* Find the mass storage bulk endpoints */
- for (i = 0; i < iface_desc->desc.bNumEndpoints && (!ep_in_size || !ep_out_size); ++i) {
- endpoint = &iface_desc->endpoint[i].desc;
-
- if (usb_endpoint_is_bulk_in(endpoint)) {
- ep_in = usb_endpoint_num(endpoint);
- ep_in_size = le16_to_cpu(endpoint->wMaxPacketSize);
- } else if (usb_endpoint_is_bulk_out(endpoint)) {
- ep_out = usb_endpoint_num(endpoint);
- ep_out_size = le16_to_cpu(endpoint->wMaxPacketSize);
- }
- }
-
- /* Can't find the mass storage endpoints */
- if (!ep_in_size || !ep_out_size) {
- US_DEBUGP("Option MS: mass storage endpoints not found, no action "
- "required\n");
- return USB_STOR_TRANSPORT_GOOD;
- }
+ /* Additional test for vendor information via INQUIRY,
+ * because some vendor/product IDs are ambiguous
+ */
+ result = option_inquiry(us);
+ if (result != 0) {
+ US_DEBUGP("Option MS: vendor is not Option or not determinable,"
+ " no action taken\n");
+ return 0;
+ } else
+ US_DEBUGP("Option MS: this is a genuine Option device,"
+ " proceeding\n");
/* Force Modem mode */
if (option_zero_cd == ZCD_FORCE_MODEM) {
US_DEBUGP("Option MS: %s", "Forcing Modem Mode\n");
- result = option_rezero(us, ep_in, ep_out);
+ result = option_rezero(us);
if (result != USB_STOR_XFER_GOOD)
US_DEBUGP("Option MS: Failed to switch to modem mode.\n");
return -EIO;
@@ -142,6 +160,6 @@
" requests it\n");
}
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
index 4359a2c..4395c41 100644
--- a/drivers/usb/storage/sierra_ms.c
+++ b/drivers/usb/storage/sierra_ms.c
@@ -202,6 +202,6 @@
complete:
result = device_create_file(&us->pusb_intf->dev, &dev_attr_truinst);
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 4b8b690..1b9c5dd 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1385,7 +1385,7 @@
UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000,
"D-Link",
"USB Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0),
+ US_SC_DEVICE, US_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
/* Reported by Kevin Lloyd <linux@sierrawireless.com>
* Entry is needed for the initializer function override,
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 2b5a691..932ffdb 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2104,6 +2104,7 @@
bool "Lime GDC"
depends on FB_MB862XX
depends on OF && !FB_MB862XX_PCI_GDC
+ depends on PPC
select FB_FOREIGN_ENDIAN
select FB_LITTLE_ENDIAN
---help---
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index 6995fe1..0bcc59e 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -859,43 +859,6 @@
return 0;
}
-/*
- * Note that we are entered with the kernel locked.
- */
-static int
-acornfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-{
- unsigned long off, start;
- u32 len;
-
- off = vma->vm_pgoff << PAGE_SHIFT;
-
- start = info->fix.smem_start;
- len = PAGE_ALIGN(start & ~PAGE_MASK) + info->fix.smem_len;
- start &= PAGE_MASK;
- if ((vma->vm_end - vma->vm_start + off) > len)
- return -EINVAL;
- off += start;
- vma->vm_pgoff = off >> PAGE_SHIFT;
-
- /* This is an IO map - tell maydump to skip this VMA */
- vma->vm_flags |= VM_IO;
-
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-
- /*
- * Don't alter the page protection flags; we want to keep the area
- * cached for better performance. This does mean that we may miss
- * some updates to the screen occasionally, but process switches
- * should cause the caches and buffers to be flushed often enough.
- */
- if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot))
- return -EAGAIN;
- return 0;
-}
-
static struct fb_ops acornfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = acornfb_check_var,
@@ -905,7 +868,6 @@
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_mmap = acornfb_mmap,
};
/*
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 2fb63f6..5afd644 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -345,7 +345,7 @@
dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel);
dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz);
- if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
+ if (PICOS2KHZ(var->pixclock) > clk_value_khz) {
dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
return -EINVAL;
}
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 97a1f09..515cf19 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -213,7 +213,6 @@
PIXCLKS_CNTL__R300_PIXCLK_TRANS_ALWAYS_ONb |
PIXCLKS_CNTL__R300_PIXCLK_TVO_ALWAYS_ONb |
PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb |
- PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb |
PIXCLKS_CNTL__R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF);
OUTPLL(pllPIXCLKS_CNTL, tmp);
@@ -395,7 +394,7 @@
PIXCLKS_CNTL__R300_PIXCLK_TRANS_ALWAYS_ONb |
PIXCLKS_CNTL__R300_PIXCLK_TVO_ALWAYS_ONb |
PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb |
- PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb);
+ PIXCLKS_CNTL__R300_P2G2CLK_DAC_ALWAYS_ONb);
OUTPLL(pllPIXCLKS_CNTL, tmp);
tmp = INPLL(pllMCLK_MISC);
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 37e60b1..e49ae5e 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -323,7 +323,6 @@
bfin_write_EPPI0_CONTROL(0);
SSYNC();
disable_dma(CH_EPPI0);
- memset(fbi->fb_buffer, 0, info->fix.smem_len);
}
spin_unlock(&fbi->lock);
@@ -530,7 +529,7 @@
return IRQ_HANDLED;
}
-static int __init bfin_bf54x_probe(struct platform_device *pdev)
+static int __devinit bfin_bf54x_probe(struct platform_device *pdev)
{
struct bfin_bf54xfb_info *info;
struct fb_info *fbinfo;
@@ -626,14 +625,12 @@
goto out3;
}
- memset(info->fb_buffer, 0, fbinfo->fix.smem_len);
-
fbinfo->screen_base = (void *)info->fb_buffer;
fbinfo->fix.smem_start = (int)info->fb_buffer;
fbinfo->fbops = &bfin_bf54x_fb_ops;
- fbinfo->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
+ fbinfo->pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL);
if (!fbinfo->pseudo_palette) {
printk(KERN_ERR DRIVER_NAME
"Fail to allocate pseudo_palette\n");
@@ -642,8 +639,6 @@
goto out4;
}
- memset(fbinfo->pseudo_palette, 0, sizeof(u32) * 16);
-
if (fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0)
< 0) {
printk(KERN_ERR DRIVER_NAME
@@ -712,7 +707,7 @@
return ret;
}
-static int bfin_bf54x_remove(struct platform_device *pdev)
+static int __devexit bfin_bf54x_remove(struct platform_device *pdev)
{
struct fb_info *fbinfo = platform_get_drvdata(pdev);
@@ -781,7 +776,7 @@
static struct platform_driver bfin_bf54x_driver = {
.probe = bfin_bf54x_probe,
- .remove = bfin_bf54x_remove,
+ .remove = __devexit_p(bfin_bf54x_remove),
.suspend = bfin_bf54x_suspend,
.resume = bfin_bf54x_resume,
.driver = {
@@ -790,7 +785,7 @@
},
};
-static int __devinit bfin_bf54x_driver_init(void)
+static int __init bfin_bf54x_driver_init(void)
{
return platform_driver_register(&bfin_bf54x_driver);
}
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index 90cfdda..5cc36cf 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -242,7 +242,6 @@
SSYNC();
disable_dma(CH_PPI);
bfin_t350mcqb_stop_timers();
- memset(fbi->fb_buffer, 0, info->fix.smem_len);
}
spin_unlock(&fbi->lock);
@@ -527,8 +526,6 @@
goto out3;
}
- memset(info->fb_buffer, 0, fbinfo->fix.smem_len);
-
fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
@@ -602,7 +599,7 @@
return ret;
}
-static int bfin_t350mcqb_remove(struct platform_device *pdev)
+static int __devexit bfin_t350mcqb_remove(struct platform_device *pdev)
{
struct fb_info *fbinfo = platform_get_drvdata(pdev);
@@ -637,9 +634,6 @@
#ifdef CONFIG_PM
static int bfin_t350mcqb_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct fb_info *fbinfo = platform_get_drvdata(pdev);
- struct bfin_t350mcqbfb_info *info = fbinfo->par;
-
bfin_t350mcqb_disable_ppi();
disable_dma(CH_PPI);
bfin_write_PPI_STATUS(0xFFFF);
@@ -649,9 +643,6 @@
static int bfin_t350mcqb_resume(struct platform_device *pdev)
{
- struct fb_info *fbinfo = platform_get_drvdata(pdev);
- struct bfin_t350mcqbfb_info *info = fbinfo->par;
-
enable_dma(CH_PPI);
bfin_t350mcqb_enable_ppi();
@@ -664,7 +655,7 @@
static struct platform_driver bfin_t350mcqb_driver = {
.probe = bfin_t350mcqb_probe,
- .remove = bfin_t350mcqb_remove,
+ .remove = __devexit_p(bfin_t350mcqb_remove),
.suspend = bfin_t350mcqb_suspend,
.resume = bfin_t350mcqb_resume,
.driver = {
@@ -673,7 +664,7 @@
},
};
-static int __devinit bfin_t350mcqb_driver_init(void)
+static int __init bfin_t350mcqb_driver_init(void)
{
return platform_driver_register(&bfin_t350mcqb_driver);
}
diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c
index c7ff3c1..0c02f8e 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/carminefb.c
@@ -562,7 +562,7 @@
if (ret < 0)
goto err_free_fb;
- if (fb_mode > ARRAY_SIZE(carmine_modedb))
+ if (fb_mode >= ARRAY_SIZE(carmine_modedb))
fb_mode = CARMINEFB_DEFAULT_VIDEO_MODE;
par->cur_mode = par->new_mode = ~0;
diff --git a/drivers/video/chipsfb.c b/drivers/video/chipsfb.c
index 777389c..57b9d27 100644
--- a/drivers/video/chipsfb.c
+++ b/drivers/video/chipsfb.c
@@ -414,7 +414,6 @@
}
pci_set_drvdata(dp, p);
- p->device = &dp->dev;
init_chips(p, addr);
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index 8dea2bc..eb12182 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -280,6 +280,9 @@
info->pseudo_palette = info->par;
info->par = NULL;
+ info->aperture_base = efifb_fix.smem_start;
+ info->aperture_size = size_total;
+
info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len);
if (!info->screen_base) {
printk(KERN_ERR "efifb: abort, cannot ioremap video memory "
@@ -337,7 +340,7 @@
info->fbops = &efifb_ops;
info->var = efifb_defined;
info->fix = efifb_fix;
- info->flags = FBINFO_FLAG_DEFAULT;
+ info->flags = FBINFO_FLAG_DEFAULT | FBINFO_MISC_FIRMWARE;
if ((err = fb_alloc_cmap(&info->cmap, 256, 0)) < 0) {
printk(KERN_ERR "efifb: cannot allocate colormap\n");
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index d412a1d..f8a09bf 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1462,6 +1462,16 @@
return 0;
}
+static bool fb_do_apertures_overlap(struct fb_info *gen, struct fb_info *hw)
+{
+ /* is the generic aperture base the same as the HW one */
+ if (gen->aperture_base == hw->aperture_base)
+ return true;
+ /* is the generic aperture base inside the hw base->hw base+size */
+ if (gen->aperture_base > hw->aperture_base && gen->aperture_base <= hw->aperture_base + hw->aperture_size)
+ return true;
+ return false;
+}
/**
* register_framebuffer - registers a frame buffer device
* @fb_info: frame buffer info structure
@@ -1485,6 +1495,23 @@
if (fb_check_foreignness(fb_info))
return -ENOSYS;
+ /* check all firmware fbs and kick off if the base addr overlaps */
+ for (i = 0 ; i < FB_MAX; i++) {
+ if (!registered_fb[i])
+ continue;
+
+ if (registered_fb[i]->flags & FBINFO_MISC_FIRMWARE) {
+ if (fb_do_apertures_overlap(registered_fb[i], fb_info)) {
+ printk(KERN_ERR "fb: conflicting fb hw usage "
+ "%s vs %s - removing generic driver\n",
+ fb_info->fix.id,
+ registered_fb[i]->fix.id);
+ unregister_framebuffer(registered_fb[i]);
+ break;
+ }
+ }
+ }
+
num_registered_fb++;
for (i = 0 ; i < FB_MAX; i++)
if (!registered_fb[i])
@@ -1586,6 +1613,10 @@
device_destroy(fb_class, MKDEV(FB_MAJOR, i));
event.info = fb_info;
fb_notifier_call_chain(FB_EVENT_FB_UNREGISTERED, &event);
+
+ /* this may free fb info */
+ if (fb_info->fbops->fb_destroy)
+ fb_info->fbops->fb_destroy(fb_info);
done:
return ret;
}
diff --git a/drivers/video/igafb.c b/drivers/video/igafb.c
index 3a81060..15d2001 100644
--- a/drivers/video/igafb.c
+++ b/drivers/video/igafb.c
@@ -395,17 +395,16 @@
/* We leak a reference here but as it cannot be unloaded this is
fine. If you write unload code remember to free it in unload */
- size = sizeof(struct fb_info) + sizeof(struct iga_par) + sizeof(u32)*16;
+ size = sizeof(struct iga_par) + sizeof(u32)*16;
- info = kzalloc(size, GFP_ATOMIC);
+ info = framebuffer_alloc(size, &pdev->dev);
if (!info) {
printk("igafb_init: can't alloc fb_info\n");
pci_dev_put(pdev);
return -ENOMEM;
}
- par = (struct iga_par *) (info + 1);
-
+ par = info->par;
if ((addr = pdev->resource[0].start) == 0) {
printk("igafb_init: no memory start\n");
@@ -526,7 +525,6 @@
info->var = default_var;
info->fix = igafb_fix;
info->pseudo_palette = (void *)(par + 1);
- info->device = &pdev->dev;
if (!iga_init(info, par)) {
iounmap((void *)par->io_base);
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c
index ace14fe..0cafd64 100644
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/intelfb/intelfbdrv.c
@@ -1365,6 +1365,11 @@
DBG_MSG("intelfb_set_par (%dx%d-%d)\n", info->var.xres,
info->var.yres, info->var.bits_per_pixel);
+ /*
+ * Disable VCO prior to timing register change.
+ */
+ OUTREG(DPLL_A, INREG(DPLL_A) & ~DPLL_VCO_ENABLE);
+
intelfb_blank(FB_BLANK_POWERDOWN, info);
if (ACCEL(dinfo, info))
diff --git a/drivers/video/logo/Makefile b/drivers/video/logo/Makefile
index b91251d..3b43781 100644
--- a/drivers/video/logo/Makefile
+++ b/drivers/video/logo/Makefile
@@ -37,22 +37,24 @@
# Gray 256
extra-y += $(call logo-cfiles,_gray256,pgm)
+pnmtologo := scripts/pnmtologo
+
# Create commands like "pnmtologo -t mono -n logo_mac_mono -o ..."
quiet_cmd_logo = LOGO $@
- cmd_logo = scripts/pnmtologo \
+ cmd_logo = $(pnmtologo) \
-t $(patsubst $*_%,%,$(notdir $(basename $<))) \
-n $(notdir $(basename $<)) -o $@ $<
-$(obj)/%_mono.c: $(src)/%_mono.pbm FORCE
+$(obj)/%_mono.c: $(src)/%_mono.pbm $(pnmtologo) FORCE
$(call if_changed,logo)
-$(obj)/%_vga16.c: $(src)/%_vga16.ppm FORCE
+$(obj)/%_vga16.c: $(src)/%_vga16.ppm $(pnmtologo) FORCE
$(call if_changed,logo)
-$(obj)/%_clut224.c: $(src)/%_clut224.ppm FORCE
+$(obj)/%_clut224.c: $(src)/%_clut224.ppm $(pnmtologo) FORCE
$(call if_changed,logo)
-$(obj)/%_gray256.c: $(src)/%_gray256.pgm FORCE
+$(obj)/%_gray256.c: $(src)/%_gray256.pgm $(pnmtologo) FORCE
$(call if_changed,logo)
# Files generated that shall be removed upon make clean
diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c
index 2e85a2b..ea7a8cc 100644
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
@@ -21,21 +21,6 @@
#include <asm/bootinfo.h>
#endif
-extern const struct linux_logo logo_linux_mono;
-extern const struct linux_logo logo_linux_vga16;
-extern const struct linux_logo logo_linux_clut224;
-extern const struct linux_logo logo_blackfin_vga16;
-extern const struct linux_logo logo_blackfin_clut224;
-extern const struct linux_logo logo_dec_clut224;
-extern const struct linux_logo logo_mac_clut224;
-extern const struct linux_logo logo_parisc_clut224;
-extern const struct linux_logo logo_sgi_clut224;
-extern const struct linux_logo logo_sun_clut224;
-extern const struct linux_logo logo_superh_mono;
-extern const struct linux_logo logo_superh_vga16;
-extern const struct linux_logo logo_superh_clut224;
-extern const struct linux_logo logo_m32r_clut224;
-
static int nologo;
module_param(nologo, bool, 0);
MODULE_PARM_DESC(nologo, "Disables startup logo");
diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c
index fb64234..a28e3cf 100644
--- a/drivers/video/mb862xx/mb862xxfb.c
+++ b/drivers/video/mb862xx/mb862xxfb.c
@@ -19,7 +19,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#if defined(CONFIG_PPC_OF)
+#if defined(CONFIG_OF)
#include <linux/of_platform.h>
#endif
#include "mb862xxfb.h"
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index 1618624..34e4e79 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -264,6 +264,14 @@
/* 1280x800, 60 Hz, 47.403 kHz hsync, WXGA 16:10 aspect ratio */
NULL, 60, 1280, 800, 12048, 200, 64, 24, 1, 136, 3,
0, FB_VMODE_NONINTERLACED
+ }, {
+ /* 720x576i @ 50 Hz, 15.625 kHz hsync (PAL RGB) */
+ NULL, 50, 720, 576, 74074, 64, 16, 39, 5, 64, 5,
+ 0, FB_VMODE_INTERLACED
+ }, {
+ /* 800x520i @ 50 Hz, 15.625 kHz hsync (PAL RGB) */
+ NULL, 50, 800, 520, 58823, 144, 64, 72, 28, 80, 5,
+ 0, FB_VMODE_INTERLACED
},
};
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index e1d9eeb..4d8c54c 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -378,7 +378,6 @@
struct fb_fix_screeninfo *fix;
struct fb_var_screeninfo *var;
struct fb_info *info;
- int size;
if (!request_mem_region(res_start, res_size, "offb"))
return;
@@ -393,15 +392,12 @@
return;
}
- size = sizeof(struct fb_info) + sizeof(u32) * 16;
-
- info = kmalloc(size, GFP_ATOMIC);
+ info = framebuffer_alloc(sizeof(u32) * 16, NULL);
if (info == 0) {
release_mem_region(res_start, res_size);
return;
}
- memset(info, 0, size);
fix = &info->fix;
var = &info->var;
@@ -497,7 +493,7 @@
iounmap(par->cmap_adr);
par->cmap_adr = NULL;
iounmap(info->screen_base);
- kfree(info);
+ framebuffer_release(info);
release_mem_region(res_start, res_size);
return;
}
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index c6dd924..36436ee 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -1748,7 +1748,7 @@
pci_set_drvdata(pdev, NULL);
fb_dealloc_cmap(&info->cmap);
kfree(info->pixmap.addr);
- kfree(info);
+ framebuffer_release(info);
}
static struct pci_device_id pm2fb_id_table[] = {
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index 0726aec..0deb0a8 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -2,6 +2,7 @@
*
* (c) 2004 Simtec Electronics
* (c) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ * (c) 2009 Kristoffer Ericson <kristoffer.ericson@gmail.com>
*
* Driver for Epson S1D13xxx series framebuffer chips
*
@@ -10,18 +11,10 @@
* linux/drivers/video/epson1355fb.c
* linux/drivers/video/epson/s1d13xxxfb.c (2.4 driver by Epson)
*
- * Note, currently only tested on S1D13806 with 16bit CRT.
- * As such, this driver might still contain some hardcoded bits relating to
- * S1D13806.
- * Making it work on other S1D13XXX chips should merely be a matter of adding
- * a few switch()s, some missing glue here and there maybe, and split header
- * files.
- *
* TODO: - handle dual screen display (CRT and LCD at the same time).
* - check_var(), mode change, etc.
- * - PM untested.
- * - Accelerated interfaces.
- * - Probably not SMP safe :)
+ * - probably not SMP safe :)
+ * - support all bitblt operations on all cards
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
@@ -31,19 +24,24 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
-
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/fb.h>
+#include <linux/spinlock_types.h>
+#include <linux/spinlock.h>
#include <asm/io.h>
#include <video/s1d13xxxfb.h>
-#define PFX "s1d13xxxfb: "
+#define PFX "s1d13xxxfb: "
+#define BLIT "s1d13xxxfb_bitblt: "
+/*
+ * set this to enable debugging on general functions
+ */
#if 0
#define dbg(fmt, args...) do { printk(KERN_INFO fmt, ## args); } while(0)
#else
@@ -51,7 +49,21 @@
#endif
/*
- * List of card production ids
+ * set this to enable debugging on 2D acceleration
+ */
+#if 0
+#define dbg_blit(fmt, args...) do { printk(KERN_INFO BLIT fmt, ## args); } while (0)
+#else
+#define dbg_blit(fmt, args...) do { } while (0)
+#endif
+
+/*
+ * we make sure only one bitblt operation is running
+ */
+static DEFINE_SPINLOCK(s1d13xxxfb_bitblt_lock);
+
+/*
+ * list of card production ids
*/
static const int s1d13xxxfb_prod_ids[] = {
S1D13505_PROD_ID,
@@ -69,7 +81,7 @@
};
/*
- * Here we define the default struct fb_fix_screeninfo
+ * here we define the default struct fb_fix_screeninfo
*/
static struct fb_fix_screeninfo __devinitdata s1d13xxxfb_fix = {
.id = S1D_FBID,
@@ -145,8 +157,10 @@
s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, mode);
}
-/* framebuffer control routines */
+/*************************************************************
+ framebuffer control functions
+ *************************************************************/
static inline void
s1d13xxxfb_setup_pseudocolour(struct fb_info *info)
{
@@ -242,13 +256,13 @@
}
/**
- * s1d13xxxfb_setcolreg - sets a color register.
- * @regno: Which register in the CLUT we are programming
- * @red: The red value which can be up to 16 bits wide
+ * s1d13xxxfb_setcolreg - sets a color register.
+ * @regno: Which register in the CLUT we are programming
+ * @red: The red value which can be up to 16 bits wide
* @green: The green value which can be up to 16 bits wide
* @blue: The blue value which can be up to 16 bits wide.
* @transp: If supported the alpha value which can be up to 16 bits wide.
- * @info: frame buffer info structure
+ * @info: frame buffer info structure
*
* Returns negative errno on error, or zero on success.
*/
@@ -351,15 +365,15 @@
}
/**
- * s1d13xxxfb_pan_display - Pans the display.
- * @var: frame buffer variable screen structure
- * @info: frame buffer structure that represents a single frame buffer
+ * s1d13xxxfb_pan_display - Pans the display.
+ * @var: frame buffer variable screen structure
+ * @info: frame buffer structure that represents a single frame buffer
*
* Pan (or wrap, depending on the `vmode' field) the display using the
- * `yoffset' field of the `var' structure (`xoffset' not yet supported).
- * If the values don't fit, return -EINVAL.
+ * `yoffset' field of the `var' structure (`xoffset' not yet supported).
+ * If the values don't fit, return -EINVAL.
*
- * Returns negative errno on error, or zero on success.
+ * Returns negative errno on error, or zero on success.
*/
static int
s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -390,8 +404,259 @@
return 0;
}
-/* framebuffer information structures */
+/************************************************************
+ functions to handle bitblt acceleration
+ ************************************************************/
+/**
+ * bltbit_wait_bitset - waits for change in register value
+ * @info : framebuffer structure
+ * @bit : value expected in register
+ * @timeout : ...
+ *
+ * waits until value changes INTO bit
+ */
+static u8
+bltbit_wait_bitset(struct fb_info *info, u8 bit, int timeout)
+{
+ while (!(s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0) & bit)) {
+ udelay(10);
+ if (!--timeout) {
+ dbg_blit("wait_bitset timeout\n");
+ break;
+ }
+ }
+
+ return timeout;
+}
+
+/**
+ * bltbit_wait_bitclear - waits for change in register value
+ * @info : frambuffer structure
+ * @bit : value currently in register
+ * @timeout : ...
+ *
+ * waits until value changes FROM bit
+ *
+ */
+static u8
+bltbit_wait_bitclear(struct fb_info *info, u8 bit, int timeout)
+{
+ while (s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0) & bit) {
+ udelay(10);
+ if (!--timeout) {
+ dbg_blit("wait_bitclear timeout\n");
+ break;
+ }
+ }
+
+ return timeout;
+}
+
+/**
+ * bltbit_fifo_status - checks the current status of the fifo
+ * @info : framebuffer structure
+ *
+ * returns number of free words in buffer
+ */
+static u8
+bltbit_fifo_status(struct fb_info *info)
+{
+ u8 status;
+
+ status = s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0);
+
+ /* its empty so room for 16 words */
+ if (status & BBLT_FIFO_EMPTY)
+ return 16;
+
+ /* its full so we dont want to add */
+ if (status & BBLT_FIFO_FULL)
+ return 0;
+
+ /* its atleast half full but we can add one atleast */
+ if (status & BBLT_FIFO_NOT_FULL)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * s1d13xxxfb_bitblt_copyarea - accelerated copyarea function
+ * @info : framebuffer structure
+ * @area : fb_copyarea structure
+ *
+ * supports (atleast) S1D13506
+ *
+ */
+static void
+s1d13xxxfb_bitblt_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+ u32 dst, src;
+ u32 stride;
+ u16 reverse = 0;
+ u16 sx = area->sx, sy = area->sy;
+ u16 dx = area->dx, dy = area->dy;
+ u16 width = area->width, height = area->height;
+ u16 bpp;
+
+ spin_lock(&s1d13xxxfb_bitblt_lock);
+
+ /* bytes per xres line */
+ bpp = (info->var.bits_per_pixel >> 3);
+ stride = bpp * info->var.xres;
+
+ /* reverse, calculate the last pixel in rectangle */
+ if ((dy > sy) || ((dy == sy) && (dx >= sx))) {
+ dst = (((dy + height - 1) * stride) + (bpp * (dx + width - 1)));
+ src = (((sy + height - 1) * stride) + (bpp * (sx + width - 1)));
+ reverse = 1;
+ /* not reverse, calculate the first pixel in rectangle */
+ } else { /* (y * xres) + (bpp * x) */
+ dst = (dy * stride) + (bpp * dx);
+ src = (sy * stride) + (bpp * sx);
+ }
+
+ /* set source adress */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START0, (src & 0xff));
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START1, (src >> 8) & 0x00ff);
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START2, (src >> 16) & 0x00ff);
+
+ /* set destination adress */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dst & 0xff));
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, (dst >> 8) & 0x00ff);
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, (dst >> 16) & 0x00ff);
+
+ /* program height and width */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH0, (width & 0xff) - 1);
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH1, (width >> 8));
+
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT0, (height & 0xff) - 1);
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT1, (height >> 8));
+
+ /* negative direction ROP */
+ if (reverse == 1) {
+ dbg_blit("(copyarea) negative rop\n");
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, 0x03);
+ } else /* positive direction ROP */ {
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, 0x02);
+ dbg_blit("(copyarea) positive rop\n");
+ }
+
+ /* set for rectangel mode and not linear */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x0);
+
+ /* setup the bpp 1 = 16bpp, 0 = 8bpp*/
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL1, (bpp >> 1));
+
+ /* set words per xres */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF0, (stride >> 1) & 0xff);
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF1, (stride >> 9));
+
+ dbg_blit("(copyarea) dx=%d, dy=%d\n", dx, dy);
+ dbg_blit("(copyarea) sx=%d, sy=%d\n", sx, sy);
+ dbg_blit("(copyarea) width=%d, height=%d\n", width - 1, height - 1);
+ dbg_blit("(copyarea) stride=%d\n", stride);
+ dbg_blit("(copyarea) bpp=%d=0x0%d, mem_offset1=%d, mem_offset2=%d\n", bpp, (bpp >> 1),
+ (stride >> 1) & 0xff, stride >> 9);
+
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CC_EXP, 0x0c);
+
+ /* initialize the engine */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x80);
+
+ /* wait to complete */
+ bltbit_wait_bitclear(info, 0x80, 8000);
+
+ spin_unlock(&s1d13xxxfb_bitblt_lock);
+}
+
+/**
+ *
+ * s1d13xxxfb_bitblt_solidfill - accelerated solidfill function
+ * @info : framebuffer structure
+ * @rect : fb_fillrect structure
+ *
+ * supports (atleast 13506)
+ *
+ **/
+static void
+s1d13xxxfb_bitblt_solidfill(struct fb_info *info, const struct fb_fillrect *rect)
+{
+ u32 screen_stride, dest;
+ u32 fg;
+ u16 bpp = (info->var.bits_per_pixel >> 3);
+
+ /* grab spinlock */
+ spin_lock(&s1d13xxxfb_bitblt_lock);
+
+ /* bytes per x width */
+ screen_stride = (bpp * info->var.xres);
+
+ /* bytes to starting point */
+ dest = ((rect->dy * screen_stride) + (bpp * rect->dx));
+
+ dbg_blit("(solidfill) dx=%d, dy=%d, stride=%d, dest=%d\n"
+ "(solidfill) : rect_width=%d, rect_height=%d\n",
+ rect->dx, rect->dy, screen_stride, dest,
+ rect->width - 1, rect->height - 1);
+
+ dbg_blit("(solidfill) : xres=%d, yres=%d, bpp=%d\n",
+ info->var.xres, info->var.yres,
+ info->var.bits_per_pixel);
+ dbg_blit("(solidfill) : rop=%d\n", rect->rop);
+
+ /* We split the destination into the three registers */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dest & 0x00ff));
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, ((dest >> 8) & 0x00ff));
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, ((dest >> 16) & 0x00ff));
+
+ /* give information regarding rectangel width */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH0, ((rect->width) & 0x00ff) - 1);
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH1, (rect->width >> 8));
+
+ /* give information regarding rectangel height */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT0, ((rect->height) & 0x00ff) - 1);
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT1, (rect->height >> 8));
+
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
+ info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
+ fg = ((u32 *)info->pseudo_palette)[rect->color];
+ dbg_blit("(solidfill) truecolor/directcolor\n");
+ dbg_blit("(solidfill) pseudo_palette[%d] = %d\n", rect->color, fg);
+ } else {
+ fg = rect->color;
+ dbg_blit("(solidfill) color = %d\n", rect->color);
+ }
+
+ /* set foreground color */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_FGC0, (fg & 0xff));
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_FGC1, (fg >> 8) & 0xff);
+
+ /* set rectangual region of memory (rectangle and not linear) */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x0);
+
+ /* set operation mode SOLID_FILL */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, BBLT_SOLID_FILL);
+
+ /* set bits per pixel (1 = 16bpp, 0 = 8bpp) */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL1, (info->var.bits_per_pixel >> 4));
+
+ /* set the memory offset for the bblt in word sizes */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF0, (screen_stride >> 1) & 0x00ff);
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF1, (screen_stride >> 9));
+
+ /* and away we go.... */
+ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x80);
+
+ /* wait until its done */
+ bltbit_wait_bitclear(info, 0x80, 8000);
+
+ /* let others play */
+ spin_unlock(&s1d13xxxfb_bitblt_lock);
+}
+
+/* framebuffer information structures */
static struct fb_ops s1d13xxxfb_fbops = {
.owner = THIS_MODULE,
.fb_set_par = s1d13xxxfb_set_par,
@@ -400,7 +665,7 @@
.fb_pan_display = s1d13xxxfb_pan_display,
- /* to be replaced by any acceleration we can */
+ /* gets replaced at chip detection time */
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
@@ -412,9 +677,9 @@
};
/**
- * s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to
+ * s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to
* hardware setup.
- * @info: frame buffer structure
+ * @info: frame buffer structure
*
* We setup the framebuffer structures according to the current
* hardware setup. On some machines, the BIOS will have filled
@@ -569,7 +834,6 @@
if (pdata && pdata->platform_init_video)
pdata->platform_init_video();
-
if (pdev->num_resources != 2) {
dev_err(&pdev->dev, "invalid num_resources: %i\n",
pdev->num_resources);
@@ -655,16 +919,27 @@
info->fix = s1d13xxxfb_fix;
info->fix.mmio_start = pdev->resource[1].start;
- info->fix.mmio_len = pdev->resource[1].end - pdev->resource[1].start +1;
+ info->fix.mmio_len = pdev->resource[1].end - pdev->resource[1].start + 1;
info->fix.smem_start = pdev->resource[0].start;
- info->fix.smem_len = pdev->resource[0].end - pdev->resource[0].start +1;
+ info->fix.smem_len = pdev->resource[0].end - pdev->resource[0].start + 1;
printk(KERN_INFO PFX "regs mapped at 0x%p, fb %d KiB mapped at 0x%p\n",
default_par->regs, info->fix.smem_len / 1024, info->screen_base);
info->par = default_par;
- info->fbops = &s1d13xxxfb_fbops;
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
+ info->fbops = &s1d13xxxfb_fbops;
+
+ switch(prod_id) {
+ case S1D13506_PROD_ID: /* activate acceleration */
+ s1d13xxxfb_fbops.fb_fillrect = s1d13xxxfb_bitblt_solidfill;
+ s1d13xxxfb_fbops.fb_copyarea = s1d13xxxfb_bitblt_copyarea;
+ info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
+ FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
+ break;
+ default:
+ break;
+ }
/* perform "manual" chip initialization, if needed */
if (pdata && pdata->initregs)
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index d3a568e..43680e5 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -358,9 +358,16 @@
writel(data, regs + VIDOSD_B(win_no));
data = var->xres * var->yres;
+
+ u32 osdc_data = 0;
+
+ osdc_data = VIDISD14C_ALPHA1_R(0xf) |
+ VIDISD14C_ALPHA1_G(0xf) |
+ VIDISD14C_ALPHA1_B(0xf);
+
if (s3c_fb_has_osd_d(win_no)) {
writel(data, regs + VIDOSD_D(win_no));
- writel(0, regs + VIDOSD_C(win_no));
+ writel(osdc_data, regs + VIDOSD_C(win_no));
} else
writel(data, regs + VIDOSD_C(win_no));
@@ -409,8 +416,12 @@
data |= WINCON1_BPPMODE_19BPP_A1666;
else
data |= WINCON1_BPPMODE_18BPP_666;
- } else if (var->transp.length != 0)
- data |= WINCON1_BPPMODE_25BPP_A1888;
+ } else if (var->transp.length == 1)
+ data |= WINCON1_BPPMODE_25BPP_A1888
+ | WINCON1_BLD_PIX;
+ else if (var->transp.length == 4)
+ data |= WINCON1_BPPMODE_28BPP_A4888
+ | WINCON1_BLD_PIX | WINCON1_ALPHA_SEL;
else
data |= WINCON0_BPPMODE_24BPP_888;
@@ -418,6 +429,20 @@
break;
}
+ /* It has no color key control register for window0 */
+ if (win_no > 0) {
+ u32 keycon0_data = 0, keycon1_data = 0;
+
+ keycon0_data = ~(WxKEYCON0_KEYBL_EN |
+ WxKEYCON0_KEYEN_F |
+ WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
+
+ keycon1_data = WxKEYCON1_COLVAL(0xffffff);
+
+ writel(keycon0_data, regs + WxKEYCONy(win_no-1, 0));
+ writel(keycon1_data, regs + WxKEYCONy(win_no-1, 1));
+ }
+
writel(data, regs + WINCON(win_no));
writel(0x0, regs + WINxMAP(win_no));
@@ -700,9 +725,12 @@
*/
static void s3c_fb_release_win(struct s3c_fb *sfb, struct s3c_fb_win *win)
{
- fb_dealloc_cmap(&win->fbinfo->cmap);
- unregister_framebuffer(win->fbinfo);
- s3c_fb_free_memory(sfb, win);
+ if (win->fbinfo) {
+ unregister_framebuffer(win->fbinfo);
+ fb_dealloc_cmap(&win->fbinfo->cmap);
+ s3c_fb_free_memory(sfb, win);
+ framebuffer_release(win->fbinfo);
+ }
}
/**
@@ -753,7 +781,7 @@
ret = s3c_fb_alloc_memory(sfb, win);
if (ret) {
dev_err(sfb->dev, "failed to allocate display memory\n");
- goto err_framebuffer;
+ return ret;
}
/* setup the r/b/g positions for the window's palette */
@@ -776,7 +804,7 @@
ret = s3c_fb_check_var(&fbinfo->var, fbinfo);
if (ret < 0) {
dev_err(sfb->dev, "check_var failed on initial video params\n");
- goto err_alloc_mem;
+ return ret;
}
/* create initial colour map */
@@ -796,20 +824,13 @@
ret = register_framebuffer(fbinfo);
if (ret < 0) {
dev_err(sfb->dev, "failed to register framebuffer\n");
- goto err_alloc_mem;
+ return ret;
}
*res = win;
dev_info(sfb->dev, "window %d: fb %s\n", win_no, fbinfo->fix.id);
return 0;
-
-err_alloc_mem:
- s3c_fb_free_memory(sfb, win);
-
-err_framebuffer:
- unregister_framebuffer(fbinfo);
- return ret;
}
/**
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index b0b4513..7da0027 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -24,6 +24,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/cpufreq.h>
#include <asm/io.h>
#include <asm/div64.h>
@@ -89,7 +90,7 @@
static unsigned int s3c2410fb_calc_pixclk(struct s3c2410fb_info *fbi,
unsigned long pixclk)
{
- unsigned long clk = clk_get_rate(fbi->clk);
+ unsigned long clk = fbi->clk_rate;
unsigned long long div;
/* pixclk is in picoseconds, our clock is in Hz
@@ -758,6 +759,57 @@
return IRQ_HANDLED;
}
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c2410fb_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct cpufreq_freqs *freqs = data;
+ struct s3c2410fb_info *info;
+ struct fb_info *fbinfo;
+ long delta_f;
+
+ info = container_of(nb, struct s3c2410fb_info, freq_transition);
+ fbinfo = platform_get_drvdata(to_platform_device(info->dev));
+
+ /* work out change, <0 for speed-up */
+ delta_f = info->clk_rate - clk_get_rate(info->clk);
+
+ if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
+ (val == CPUFREQ_PRECHANGE && delta_f < 0)) {
+ info->clk_rate = clk_get_rate(info->clk);
+ s3c2410fb_activate_var(fbinfo);
+ }
+
+ return 0;
+}
+
+static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
+{
+ info->freq_transition.notifier_call = s3c2410fb_cpufreq_transition;
+
+ return cpufreq_register_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
+{
+ cpufreq_unregister_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
+{
+ return 0;
+}
+
+static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
+{
+}
+#endif
+
+
static char driver_name[] = "s3c2410fb";
static int __init s3c24xxfb_probe(struct platform_device *pdev,
@@ -875,6 +927,8 @@
msleep(1);
+ info->clk_rate = clk_get_rate(info->clk);
+
/* find maximum required memory size for display */
for (i = 0; i < mach_info->num_displays; i++) {
unsigned long smem_len = mach_info->displays[i].xres;
@@ -904,11 +958,17 @@
s3c2410fb_check_var(&fbinfo->var, fbinfo);
+ ret = s3c2410fb_cpufreq_register(info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register cpufreq\n");
+ goto free_video_memory;
+ }
+
ret = register_framebuffer(fbinfo);
if (ret < 0) {
printk(KERN_ERR "Failed to register framebuffer device: %d\n",
ret);
- goto free_video_memory;
+ goto free_cpufreq;
}
/* create device files */
@@ -922,6 +982,8 @@
return 0;
+ free_cpufreq:
+ s3c2410fb_cpufreq_deregister(info);
free_video_memory:
s3c2410fb_unmap_video_memory(fbinfo);
release_clock:
@@ -961,6 +1023,7 @@
int irq;
unregister_framebuffer(fbinfo);
+ s3c2410fb_cpufreq_deregister(info);
s3c2410fb_lcd_enable(info, 0);
msleep(1);
diff --git a/drivers/video/s3c2410fb.h b/drivers/video/s3c2410fb.h
index 9a6ba3e..47a17bd 100644
--- a/drivers/video/s3c2410fb.h
+++ b/drivers/video/s3c2410fb.h
@@ -29,8 +29,13 @@
enum s3c_drv_type drv_type;
struct s3c2410fb_hw regs;
+ unsigned long clk_rate;
unsigned int palette_ready;
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+#endif
+
/* keep these registers in case we need to re-write palette */
u32 palette_buffer[256];
u32 pseudo_pal[16];
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 7e17ee9..7072d19 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -5928,7 +5928,7 @@
if(pci_enable_device(pdev)) {
if(ivideo->nbridge) pci_dev_put(ivideo->nbridge);
pci_set_drvdata(pdev, NULL);
- kfree(sis_fb_info);
+ framebuffer_release(sis_fb_info);
return -EIO;
}
}
@@ -6134,7 +6134,7 @@
pci_set_drvdata(pdev, NULL);
if(!ivideo->sisvga_enabled)
pci_disable_device(pdev);
- kfree(sis_fb_info);
+ framebuffer_release(sis_fb_info);
return ret;
}
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index eabaad7..eec9dcb 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -1380,7 +1380,7 @@
if (info->screen_base)
iounmap(info->screen_base);
fb_dealloc_cmap(&info->cmap);
- kfree(info);
+ framebuffer_release(info);
}
sti->info = NULL;
}
diff --git a/drivers/video/tcx.c b/drivers/video/tcx.c
index 643afbfe..45b8835 100644
--- a/drivers/video/tcx.c
+++ b/drivers/video/tcx.c
@@ -116,17 +116,16 @@
u32 flags;
#define TCX_FLAG_BLANKED 0x00000001
- unsigned long physbase;
unsigned long which_io;
- unsigned long fbsize;
struct sbus_mmap_map mmap_map[TCX_MMAP_ENTRIES];
int lowdepth;
};
/* Reset control plane so that WID is 8-bit plane. */
-static void __tcx_set_control_plane(struct tcx_par *par)
+static void __tcx_set_control_plane(struct fb_info *info)
{
+ struct tcx_par *par = info->par;
u32 __iomem *p, *pend;
if (par->lowdepth)
@@ -135,7 +134,7 @@
p = par->cplane;
if (p == NULL)
return;
- for (pend = p + par->fbsize; p < pend; p++) {
+ for (pend = p + info->fix.smem_len; p < pend; p++) {
u32 tmp = sbus_readl(p);
tmp &= 0xffffff;
@@ -149,7 +148,7 @@
unsigned long flags;
spin_lock_irqsave(&par->lock, flags);
- __tcx_set_control_plane(par);
+ __tcx_set_control_plane(info);
spin_unlock_irqrestore(&par->lock, flags);
}
@@ -304,7 +303,7 @@
struct tcx_par *par = (struct tcx_par *)info->par;
return sbusfb_mmap_helper(par->mmap_map,
- par->physbase, par->fbsize,
+ info->fix.smem_start, info->fix.smem_len,
par->which_io, vma);
}
@@ -316,7 +315,7 @@
return sbusfb_ioctl_helper(cmd, arg, info,
FBTYPE_TCXCOLOR,
(par->lowdepth ? 8 : 24),
- par->fbsize);
+ info->fix.smem_len);
}
/*
@@ -358,10 +357,10 @@
par->bt, sizeof(struct bt_regs));
if (par->cplane)
of_iounmap(&op->resource[4],
- par->cplane, par->fbsize * sizeof(u32));
+ par->cplane, info->fix.smem_len * sizeof(u32));
if (info->screen_base)
of_iounmap(&op->resource[0],
- info->screen_base, par->fbsize);
+ info->screen_base, info->fix.smem_len);
}
static int __devinit tcx_probe(struct of_device *op,
@@ -391,7 +390,7 @@
linebytes = of_getintprop_default(dp, "linebytes",
info->var.xres);
- par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+ info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
par->tec = of_ioremap(&op->resource[7], 0,
sizeof(struct tcx_tec), "tcx tec");
@@ -400,7 +399,7 @@
par->bt = of_ioremap(&op->resource[8], 0,
sizeof(struct bt_regs), "tcx dac");
info->screen_base = of_ioremap(&op->resource[0], 0,
- par->fbsize, "tcx ram");
+ info->fix.smem_len, "tcx ram");
if (!par->tec || !par->thc ||
!par->bt || !info->screen_base)
goto out_unmap_regs;
@@ -408,7 +407,7 @@
memcpy(&par->mmap_map, &__tcx_mmap_map, sizeof(par->mmap_map));
if (!par->lowdepth) {
par->cplane = of_ioremap(&op->resource[4], 0,
- par->fbsize * sizeof(u32),
+ info->fix.smem_len * sizeof(u32),
"tcx cplane");
if (!par->cplane)
goto out_unmap_regs;
@@ -419,7 +418,7 @@
par->mmap_map[6].size = SBUS_MMAP_EMPTY;
}
- par->physbase = op->resource[0].start;
+ info->fix.smem_start = op->resource[0].start;
par->which_io = op->resource[0].flags & IORESOURCE_BITS;
for (i = 0; i < TCX_MMAP_ENTRIES; i++) {
@@ -473,7 +472,7 @@
printk(KERN_INFO "%s: TCX at %lx:%lx, %s\n",
dp->full_name,
par->which_io,
- par->physbase,
+ info->fix.smem_start,
par->lowdepth ? "8-bit only" : "24-bit depth");
return 0;
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index d6856f4..bd37ee1 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -174,8 +174,17 @@
return err;
}
+static void vesafb_destroy(struct fb_info *info)
+{
+ if (info->screen_base)
+ iounmap(info->screen_base);
+ release_mem_region(info->aperture_base, info->aperture_size);
+ framebuffer_release(info);
+}
+
static struct fb_ops vesafb_ops = {
.owner = THIS_MODULE,
+ .fb_destroy = vesafb_destroy,
.fb_setcolreg = vesafb_setcolreg,
.fb_pan_display = vesafb_pan_display,
.fb_fillrect = cfb_fillrect,
@@ -286,6 +295,10 @@
info->pseudo_palette = info->par;
info->par = NULL;
+ /* set vesafb aperture size for generic probing */
+ info->aperture_base = screen_info.lfb_base;
+ info->aperture_size = size_total;
+
info->screen_base = ioremap(vesafb_fix.smem_start, vesafb_fix.smem_len);
if (!info->screen_base) {
printk(KERN_ERR
@@ -437,7 +450,7 @@
info->fbops = &vesafb_ops;
info->var = vesafb_defined;
info->fix = vesafb_fix;
- info->flags = FBINFO_FLAG_DEFAULT |
+ info->flags = FBINFO_FLAG_DEFAULT | FBINFO_MISC_FIRMWARE |
(ypan ? FBINFO_HWACCEL_YPAN : 0);
if (!ypan)
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index 2493f05..15502d5 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -384,7 +384,7 @@
fb_size = XENFB_DEFAULT_FB_LEN;
}
- dev->dev.driver_data = info;
+ dev_set_drvdata(&dev->dev, info);
info->xbdev = dev;
info->irq = -1;
info->x1 = info->y1 = INT_MAX;
@@ -503,7 +503,7 @@
static int xenfb_resume(struct xenbus_device *dev)
{
- struct xenfb_info *info = dev->dev.driver_data;
+ struct xenfb_info *info = dev_get_drvdata(&dev->dev);
xenfb_disconnect_backend(info);
xenfb_init_shared_page(info, info->fb_info);
@@ -512,7 +512,7 @@
static int xenfb_remove(struct xenbus_device *dev)
{
- struct xenfb_info *info = dev->dev.driver_data;
+ struct xenfb_info *info = dev_get_drvdata(&dev->dev);
xenfb_disconnect_backend(info);
if (info->fb_info) {
@@ -621,7 +621,7 @@
static void xenfb_backend_changed(struct xenbus_device *dev,
enum xenbus_state backend_state)
{
- struct xenfb_info *info = dev->dev.driver_data;
+ struct xenfb_info *info = dev_get_drvdata(&dev->dev);
int val;
switch (backend_state) {
diff --git a/drivers/vlynq/Kconfig b/drivers/vlynq/Kconfig
new file mode 100644
index 0000000..f654221
--- /dev/null
+++ b/drivers/vlynq/Kconfig
@@ -0,0 +1,20 @@
+menu "TI VLYNQ"
+
+config VLYNQ
+ bool "TI VLYNQ bus support"
+ depends on AR7 && EXPERIMENTAL
+ help
+ Support for Texas Instruments(R) VLYNQ bus.
+ The VLYNQ bus is a high-speed, serial and packetized
+ data bus which allows external peripherals of a SoC
+ to appear into the system's main memory.
+
+ If unsure, say N
+
+config VLYNQ_DEBUG
+ bool "VLYNQ bus debug"
+ depends on VLYNQ && KERNEL_DEBUG
+ help
+ Turn on VLYNQ bus debugging.
+
+endmenu
diff --git a/drivers/vlynq/Makefile b/drivers/vlynq/Makefile
new file mode 100644
index 0000000..b3f6114
--- /dev/null
+++ b/drivers/vlynq/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for kernel vlynq drivers
+#
+
+obj-$(CONFIG_VLYNQ) += vlynq.o
diff --git a/drivers/vlynq/vlynq.c b/drivers/vlynq/vlynq.c
new file mode 100644
index 0000000..7335433
--- /dev/null
+++ b/drivers/vlynq/vlynq.c
@@ -0,0 +1,814 @@
+/*
+ * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Parts of the VLYNQ specification can be found here:
+ * http://www.ti.com/litv/pdf/sprue36a
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <linux/vlynq.h>
+
+#define VLYNQ_CTRL_PM_ENABLE 0x80000000
+#define VLYNQ_CTRL_CLOCK_INT 0x00008000
+#define VLYNQ_CTRL_CLOCK_DIV(x) (((x) & 7) << 16)
+#define VLYNQ_CTRL_INT_LOCAL 0x00004000
+#define VLYNQ_CTRL_INT_ENABLE 0x00002000
+#define VLYNQ_CTRL_INT_VECTOR(x) (((x) & 0x1f) << 8)
+#define VLYNQ_CTRL_INT2CFG 0x00000080
+#define VLYNQ_CTRL_RESET 0x00000001
+
+#define VLYNQ_CTRL_CLOCK_MASK (0x7 << 16)
+
+#define VLYNQ_INT_OFFSET 0x00000014
+#define VLYNQ_REMOTE_OFFSET 0x00000080
+
+#define VLYNQ_STATUS_LINK 0x00000001
+#define VLYNQ_STATUS_LERROR 0x00000080
+#define VLYNQ_STATUS_RERROR 0x00000100
+
+#define VINT_ENABLE 0x00000100
+#define VINT_TYPE_EDGE 0x00000080
+#define VINT_LEVEL_LOW 0x00000040
+#define VINT_VECTOR(x) ((x) & 0x1f)
+#define VINT_OFFSET(irq) (8 * ((irq) % 4))
+
+#define VLYNQ_AUTONEGO_V2 0x00010000
+
+struct vlynq_regs {
+ u32 revision;
+ u32 control;
+ u32 status;
+ u32 int_prio;
+ u32 int_status;
+ u32 int_pending;
+ u32 int_ptr;
+ u32 tx_offset;
+ struct vlynq_mapping rx_mapping[4];
+ u32 chip;
+ u32 autonego;
+ u32 unused[6];
+ u32 int_device[8];
+};
+
+#ifdef VLYNQ_DEBUG
+static void vlynq_dump_regs(struct vlynq_device *dev)
+{
+ int i;
+
+ printk(KERN_DEBUG "VLYNQ local=%p remote=%p\n",
+ dev->local, dev->remote);
+ for (i = 0; i < 32; i++) {
+ printk(KERN_DEBUG "VLYNQ: local %d: %08x\n",
+ i + 1, ((u32 *)dev->local)[i]);
+ printk(KERN_DEBUG "VLYNQ: remote %d: %08x\n",
+ i + 1, ((u32 *)dev->remote)[i]);
+ }
+}
+
+static void vlynq_dump_mem(u32 *base, int count)
+{
+ int i;
+
+ for (i = 0; i < (count + 3) / 4; i++) {
+ if (i % 4 == 0)
+ printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4);
+ printk(KERN_DEBUG " 0x%08x", *(base + i));
+ }
+ printk(KERN_DEBUG "\n");
+}
+#endif
+
+/* Check the VLYNQ link status with a given device */
+static int vlynq_linked(struct vlynq_device *dev)
+{
+ int i;
+
+ for (i = 0; i < 100; i++)
+ if (readl(&dev->local->status) & VLYNQ_STATUS_LINK)
+ return 1;
+ else
+ cpu_relax();
+
+ return 0;
+}
+
+static void vlynq_reset(struct vlynq_device *dev)
+{
+ writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
+ &dev->local->control);
+
+ /* Wait for the devices to finish resetting */
+ msleep(5);
+
+ /* Remove reset bit */
+ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
+ &dev->local->control);
+
+ /* Give some time for the devices to settle */
+ msleep(5);
+}
+
+static void vlynq_irq_unmask(unsigned int irq)
+{
+ u32 val;
+ struct vlynq_device *dev = get_irq_chip_data(irq);
+ int virq;
+
+ BUG_ON(!dev);
+ virq = irq - dev->irq_start;
+ val = readl(&dev->remote->int_device[virq >> 2]);
+ val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq);
+ writel(val, &dev->remote->int_device[virq >> 2]);
+}
+
+static void vlynq_irq_mask(unsigned int irq)
+{
+ u32 val;
+ struct vlynq_device *dev = get_irq_chip_data(irq);
+ int virq;
+
+ BUG_ON(!dev);
+ virq = irq - dev->irq_start;
+ val = readl(&dev->remote->int_device[virq >> 2]);
+ val &= ~(VINT_ENABLE << VINT_OFFSET(virq));
+ writel(val, &dev->remote->int_device[virq >> 2]);
+}
+
+static int vlynq_irq_type(unsigned int irq, unsigned int flow_type)
+{
+ u32 val;
+ struct vlynq_device *dev = get_irq_chip_data(irq);
+ int virq;
+
+ BUG_ON(!dev);
+ virq = irq - dev->irq_start;
+ val = readl(&dev->remote->int_device[virq >> 2]);
+ switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_EDGE_FALLING:
+ case IRQ_TYPE_EDGE_BOTH:
+ val |= VINT_TYPE_EDGE << VINT_OFFSET(virq);
+ val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq));
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq));
+ val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq));
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq));
+ val |= VINT_LEVEL_LOW << VINT_OFFSET(virq);
+ break;
+ default:
+ return -EINVAL;
+ }
+ writel(val, &dev->remote->int_device[virq >> 2]);
+ return 0;
+}
+
+static void vlynq_local_ack(unsigned int irq)
+{
+ struct vlynq_device *dev = get_irq_chip_data(irq);
+
+ u32 status = readl(&dev->local->status);
+
+ pr_debug("%s: local status: 0x%08x\n",
+ dev_name(&dev->dev), status);
+ writel(status, &dev->local->status);
+}
+
+static void vlynq_remote_ack(unsigned int irq)
+{
+ struct vlynq_device *dev = get_irq_chip_data(irq);
+
+ u32 status = readl(&dev->remote->status);
+
+ pr_debug("%s: remote status: 0x%08x\n",
+ dev_name(&dev->dev), status);
+ writel(status, &dev->remote->status);
+}
+
+static irqreturn_t vlynq_irq(int irq, void *dev_id)
+{
+ struct vlynq_device *dev = dev_id;
+ u32 status;
+ int virq = 0;
+
+ status = readl(&dev->local->int_status);
+ writel(status, &dev->local->int_status);
+
+ if (unlikely(!status))
+ spurious_interrupt();
+
+ while (status) {
+ if (status & 1)
+ do_IRQ(dev->irq_start + virq);
+ status >>= 1;
+ virq++;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irq_chip vlynq_irq_chip = {
+ .name = "vlynq",
+ .unmask = vlynq_irq_unmask,
+ .mask = vlynq_irq_mask,
+ .set_type = vlynq_irq_type,
+};
+
+static struct irq_chip vlynq_local_chip = {
+ .name = "vlynq local error",
+ .unmask = vlynq_irq_unmask,
+ .mask = vlynq_irq_mask,
+ .ack = vlynq_local_ack,
+};
+
+static struct irq_chip vlynq_remote_chip = {
+ .name = "vlynq local error",
+ .unmask = vlynq_irq_unmask,
+ .mask = vlynq_irq_mask,
+ .ack = vlynq_remote_ack,
+};
+
+static int vlynq_setup_irq(struct vlynq_device *dev)
+{
+ u32 val;
+ int i, virq;
+
+ if (dev->local_irq == dev->remote_irq) {
+ printk(KERN_ERR
+ "%s: local vlynq irq should be different from remote\n",
+ dev_name(&dev->dev));
+ return -EINVAL;
+ }
+
+ /* Clear local and remote error bits */
+ writel(readl(&dev->local->status), &dev->local->status);
+ writel(readl(&dev->remote->status), &dev->remote->status);
+
+ /* Now setup interrupts */
+ val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq);
+ val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL |
+ VLYNQ_CTRL_INT2CFG;
+ val |= readl(&dev->local->control);
+ writel(VLYNQ_INT_OFFSET, &dev->local->int_ptr);
+ writel(val, &dev->local->control);
+
+ val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq);
+ val |= VLYNQ_CTRL_INT_ENABLE;
+ val |= readl(&dev->remote->control);
+ writel(VLYNQ_INT_OFFSET, &dev->remote->int_ptr);
+ writel(val, &dev->remote->int_ptr);
+ writel(val, &dev->remote->control);
+
+ for (i = dev->irq_start; i <= dev->irq_end; i++) {
+ virq = i - dev->irq_start;
+ if (virq == dev->local_irq) {
+ set_irq_chip_and_handler(i, &vlynq_local_chip,
+ handle_level_irq);
+ set_irq_chip_data(i, dev);
+ } else if (virq == dev->remote_irq) {
+ set_irq_chip_and_handler(i, &vlynq_remote_chip,
+ handle_level_irq);
+ set_irq_chip_data(i, dev);
+ } else {
+ set_irq_chip_and_handler(i, &vlynq_irq_chip,
+ handle_simple_irq);
+ set_irq_chip_data(i, dev);
+ writel(0, &dev->remote->int_device[virq >> 2]);
+ }
+ }
+
+ if (request_irq(dev->irq, vlynq_irq, IRQF_SHARED, "vlynq", dev)) {
+ printk(KERN_ERR "%s: request_irq failed\n",
+ dev_name(&dev->dev));
+ return -EAGAIN;
+ }
+
+ return 0;
+}
+
+static void vlynq_device_release(struct device *dev)
+{
+ struct vlynq_device *vdev = to_vlynq_device(dev);
+ kfree(vdev);
+}
+
+static int vlynq_device_match(struct device *dev,
+ struct device_driver *drv)
+{
+ struct vlynq_device *vdev = to_vlynq_device(dev);
+ struct vlynq_driver *vdrv = to_vlynq_driver(drv);
+ struct vlynq_device_id *ids = vdrv->id_table;
+
+ while (ids->id) {
+ if (ids->id == vdev->dev_id) {
+ vdev->divisor = ids->divisor;
+ vlynq_set_drvdata(vdev, ids);
+ printk(KERN_INFO "Driver found for VLYNQ "
+ "device: %08x\n", vdev->dev_id);
+ return 1;
+ }
+ printk(KERN_DEBUG "Not using the %08x VLYNQ device's driver"
+ " for VLYNQ device: %08x\n", ids->id, vdev->dev_id);
+ ids++;
+ }
+ return 0;
+}
+
+static int vlynq_device_probe(struct device *dev)
+{
+ struct vlynq_device *vdev = to_vlynq_device(dev);
+ struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
+ struct vlynq_device_id *id = vlynq_get_drvdata(vdev);
+ int result = -ENODEV;
+
+ if (drv->probe)
+ result = drv->probe(vdev, id);
+ if (result)
+ put_device(dev);
+ return result;
+}
+
+static int vlynq_device_remove(struct device *dev)
+{
+ struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
+
+ if (drv->remove)
+ drv->remove(to_vlynq_device(dev));
+
+ return 0;
+}
+
+int __vlynq_register_driver(struct vlynq_driver *driver, struct module *owner)
+{
+ driver->driver.name = driver->name;
+ driver->driver.bus = &vlynq_bus_type;
+ return driver_register(&driver->driver);
+}
+EXPORT_SYMBOL(__vlynq_register_driver);
+
+void vlynq_unregister_driver(struct vlynq_driver *driver)
+{
+ driver_unregister(&driver->driver);
+}
+EXPORT_SYMBOL(vlynq_unregister_driver);
+
+/*
+ * A VLYNQ remote device can clock the VLYNQ bus master
+ * using a dedicated clock line. In that case, both the
+ * remove device and the bus master should have the same
+ * serial clock dividers configured. Iterate through the
+ * 8 possible dividers until we actually link with the
+ * device.
+ */
+static int __vlynq_try_remote(struct vlynq_device *dev)
+{
+ int i;
+
+ vlynq_reset(dev);
+ for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ?
+ i <= vlynq_rdiv8 : i >= vlynq_rdiv2;
+ dev->dev_id ? i++ : i--) {
+
+ if (!vlynq_linked(dev))
+ break;
+
+ writel((readl(&dev->remote->control) &
+ ~VLYNQ_CTRL_CLOCK_MASK) |
+ VLYNQ_CTRL_CLOCK_INT |
+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
+ &dev->remote->control);
+ writel((readl(&dev->local->control)
+ & ~(VLYNQ_CTRL_CLOCK_INT |
+ VLYNQ_CTRL_CLOCK_MASK)) |
+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
+ &dev->local->control);
+
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
+ "%s: using remote clock divisor %d\n",
+ dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
+ dev->divisor = i;
+ return 0;
+ } else {
+ vlynq_reset(dev);
+ }
+ }
+
+ return -ENODEV;
+}
+
+/*
+ * A VLYNQ remote device can be clocked by the VLYNQ bus
+ * master using a dedicated clock line. In that case, only
+ * the bus master configures the serial clock divider.
+ * Iterate through the 8 possible dividers until we
+ * actually get a link with the device.
+ */
+static int __vlynq_try_local(struct vlynq_device *dev)
+{
+ int i;
+
+ vlynq_reset(dev);
+
+ for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
+ i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
+ dev->dev_id ? i++ : i--) {
+
+ writel((readl(&dev->local->control) &
+ ~VLYNQ_CTRL_CLOCK_MASK) |
+ VLYNQ_CTRL_CLOCK_INT |
+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
+ &dev->local->control);
+
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
+ "%s: using local clock divisor %d\n",
+ dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
+ dev->divisor = i;
+ return 0;
+ } else {
+ vlynq_reset(dev);
+ }
+ }
+
+ return -ENODEV;
+}
+
+/*
+ * When using external clocking method, serial clock
+ * is supplied by an external oscillator, therefore we
+ * should mask the local clock bit in the clock control
+ * register for both the bus master and the remote device.
+ */
+static int __vlynq_try_external(struct vlynq_device *dev)
+{
+ vlynq_reset(dev);
+ if (!vlynq_linked(dev))
+ return -ENODEV;
+
+ writel((readl(&dev->remote->control) &
+ ~VLYNQ_CTRL_CLOCK_INT),
+ &dev->remote->control);
+
+ writel((readl(&dev->local->control) &
+ ~VLYNQ_CTRL_CLOCK_INT),
+ &dev->local->control);
+
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG "%s: using external clock\n",
+ dev_name(&dev->dev));
+ dev->divisor = vlynq_div_external;
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static int __vlynq_enable_device(struct vlynq_device *dev)
+{
+ int result;
+ struct plat_vlynq_ops *ops = dev->dev.platform_data;
+
+ result = ops->on(dev);
+ if (result)
+ return result;
+
+ switch (dev->divisor) {
+ case vlynq_div_external:
+ case vlynq_div_auto:
+ /* When the device is brought from reset it should have clock
+ * generation negotiated by hardware.
+ * Check which device is generating clocks and perform setup
+ * accordingly */
+ if (vlynq_linked(dev) && readl(&dev->remote->control) &
+ VLYNQ_CTRL_CLOCK_INT) {
+ if (!__vlynq_try_remote(dev) ||
+ !__vlynq_try_local(dev) ||
+ !__vlynq_try_external(dev))
+ return 0;
+ } else {
+ if (!__vlynq_try_external(dev) ||
+ !__vlynq_try_local(dev) ||
+ !__vlynq_try_remote(dev))
+ return 0;
+ }
+ break;
+ case vlynq_ldiv1:
+ case vlynq_ldiv2:
+ case vlynq_ldiv3:
+ case vlynq_ldiv4:
+ case vlynq_ldiv5:
+ case vlynq_ldiv6:
+ case vlynq_ldiv7:
+ case vlynq_ldiv8:
+ writel(VLYNQ_CTRL_CLOCK_INT |
+ VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+ vlynq_ldiv1), &dev->local->control);
+ writel(0, &dev->remote->control);
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
+ "%s: using local clock divisor %d\n",
+ dev_name(&dev->dev),
+ dev->divisor - vlynq_ldiv1 + 1);
+ return 0;
+ }
+ break;
+ case vlynq_rdiv1:
+ case vlynq_rdiv2:
+ case vlynq_rdiv3:
+ case vlynq_rdiv4:
+ case vlynq_rdiv5:
+ case vlynq_rdiv6:
+ case vlynq_rdiv7:
+ case vlynq_rdiv8:
+ writel(0, &dev->local->control);
+ writel(VLYNQ_CTRL_CLOCK_INT |
+ VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+ vlynq_rdiv1), &dev->remote->control);
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
+ "%s: using remote clock divisor %d\n",
+ dev_name(&dev->dev),
+ dev->divisor - vlynq_rdiv1 + 1);
+ return 0;
+ }
+ break;
+ }
+
+ ops->off(dev);
+ return -ENODEV;
+}
+
+int vlynq_enable_device(struct vlynq_device *dev)
+{
+ struct plat_vlynq_ops *ops = dev->dev.platform_data;
+ int result = -ENODEV;
+
+ result = __vlynq_enable_device(dev);
+ if (result)
+ return result;
+
+ result = vlynq_setup_irq(dev);
+ if (result)
+ ops->off(dev);
+
+ dev->enabled = !result;
+ return result;
+}
+EXPORT_SYMBOL(vlynq_enable_device);
+
+
+void vlynq_disable_device(struct vlynq_device *dev)
+{
+ struct plat_vlynq_ops *ops = dev->dev.platform_data;
+
+ dev->enabled = 0;
+ free_irq(dev->irq, dev);
+ ops->off(dev);
+}
+EXPORT_SYMBOL(vlynq_disable_device);
+
+int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset,
+ struct vlynq_mapping *mapping)
+{
+ int i;
+
+ if (!dev->enabled)
+ return -ENXIO;
+
+ writel(tx_offset, &dev->local->tx_offset);
+ for (i = 0; i < 4; i++) {
+ writel(mapping[i].offset, &dev->local->rx_mapping[i].offset);
+ writel(mapping[i].size, &dev->local->rx_mapping[i].size);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(vlynq_set_local_mapping);
+
+int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset,
+ struct vlynq_mapping *mapping)
+{
+ int i;
+
+ if (!dev->enabled)
+ return -ENXIO;
+
+ writel(tx_offset, &dev->remote->tx_offset);
+ for (i = 0; i < 4; i++) {
+ writel(mapping[i].offset, &dev->remote->rx_mapping[i].offset);
+ writel(mapping[i].size, &dev->remote->rx_mapping[i].size);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(vlynq_set_remote_mapping);
+
+int vlynq_set_local_irq(struct vlynq_device *dev, int virq)
+{
+ int irq = dev->irq_start + virq;
+ if (dev->enabled)
+ return -EBUSY;
+
+ if ((irq < dev->irq_start) || (irq > dev->irq_end))
+ return -EINVAL;
+
+ if (virq == dev->remote_irq)
+ return -EINVAL;
+
+ dev->local_irq = virq;
+
+ return 0;
+}
+EXPORT_SYMBOL(vlynq_set_local_irq);
+
+int vlynq_set_remote_irq(struct vlynq_device *dev, int virq)
+{
+ int irq = dev->irq_start + virq;
+ if (dev->enabled)
+ return -EBUSY;
+
+ if ((irq < dev->irq_start) || (irq > dev->irq_end))
+ return -EINVAL;
+
+ if (virq == dev->local_irq)
+ return -EINVAL;
+
+ dev->remote_irq = virq;
+
+ return 0;
+}
+EXPORT_SYMBOL(vlynq_set_remote_irq);
+
+static int vlynq_probe(struct platform_device *pdev)
+{
+ struct vlynq_device *dev;
+ struct resource *regs_res, *mem_res, *irq_res;
+ int len, result;
+
+ regs_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ if (!regs_res)
+ return -ENODEV;
+
+ mem_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
+ if (!mem_res)
+ return -ENODEV;
+
+ irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "devirq");
+ if (!irq_res)
+ return -ENODEV;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ printk(KERN_ERR
+ "vlynq: failed to allocate device structure\n");
+ return -ENOMEM;
+ }
+
+ dev->id = pdev->id;
+ dev->dev.bus = &vlynq_bus_type;
+ dev->dev.parent = &pdev->dev;
+ dev_set_name(&dev->dev, "vlynq%d", dev->id);
+ dev->dev.platform_data = pdev->dev.platform_data;
+ dev->dev.release = vlynq_device_release;
+
+ dev->regs_start = regs_res->start;
+ dev->regs_end = regs_res->end;
+ dev->mem_start = mem_res->start;
+ dev->mem_end = mem_res->end;
+
+ len = regs_res->end - regs_res->start;
+ if (!request_mem_region(regs_res->start, len, dev_name(&dev->dev))) {
+ printk(KERN_ERR "%s: Can't request vlynq registers\n",
+ dev_name(&dev->dev));
+ result = -ENXIO;
+ goto fail_request;
+ }
+
+ dev->local = ioremap(regs_res->start, len);
+ if (!dev->local) {
+ printk(KERN_ERR "%s: Can't remap vlynq registers\n",
+ dev_name(&dev->dev));
+ result = -ENXIO;
+ goto fail_remap;
+ }
+
+ dev->remote = (struct vlynq_regs *)((void *)dev->local +
+ VLYNQ_REMOTE_OFFSET);
+
+ dev->irq = platform_get_irq_byname(pdev, "irq");
+ dev->irq_start = irq_res->start;
+ dev->irq_end = irq_res->end;
+ dev->local_irq = dev->irq_end - dev->irq_start;
+ dev->remote_irq = dev->local_irq - 1;
+
+ if (device_register(&dev->dev))
+ goto fail_register;
+ platform_set_drvdata(pdev, dev);
+
+ printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
+ dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
+ (void *)dev->mem_start);
+
+ dev->dev_id = 0;
+ dev->divisor = vlynq_div_auto;
+ result = __vlynq_enable_device(dev);
+ if (result == 0) {
+ dev->dev_id = readl(&dev->remote->chip);
+ ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
+ }
+ if (dev->dev_id)
+ printk(KERN_INFO "Found a VLYNQ device: %08x\n", dev->dev_id);
+
+ return 0;
+
+fail_register:
+ iounmap(dev->local);
+fail_remap:
+fail_request:
+ release_mem_region(regs_res->start, len);
+ kfree(dev);
+ return result;
+}
+
+static int vlynq_remove(struct platform_device *pdev)
+{
+ struct vlynq_device *dev = platform_get_drvdata(pdev);
+
+ device_unregister(&dev->dev);
+ iounmap(dev->local);
+ release_mem_region(dev->regs_start, dev->regs_end - dev->regs_start);
+
+ kfree(dev);
+
+ return 0;
+}
+
+static struct platform_driver vlynq_platform_driver = {
+ .driver.name = "vlynq",
+ .probe = vlynq_probe,
+ .remove = __devexit_p(vlynq_remove),
+};
+
+struct bus_type vlynq_bus_type = {
+ .name = "vlynq",
+ .match = vlynq_device_match,
+ .probe = vlynq_device_probe,
+ .remove = vlynq_device_remove,
+};
+EXPORT_SYMBOL(vlynq_bus_type);
+
+static int __devinit vlynq_init(void)
+{
+ int res = 0;
+
+ res = bus_register(&vlynq_bus_type);
+ if (res)
+ goto fail_bus;
+
+ res = platform_driver_register(&vlynq_platform_driver);
+ if (res)
+ goto fail_platform;
+
+ return 0;
+
+fail_platform:
+ bus_unregister(&vlynq_bus_type);
+fail_bus:
+ return res;
+}
+
+static void __devexit vlynq_exit(void)
+{
+ platform_driver_unregister(&vlynq_platform_driver);
+ bus_unregister(&vlynq_bus_type);
+}
+
+module_init(vlynq_init);
+module_exit(vlynq_exit);
diff --git a/fs/Kconfig b/fs/Kconfig
index 525da2e..4044f16 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -39,6 +39,13 @@
bool
default n
+source "fs/xfs/Kconfig"
+source "fs/gfs2/Kconfig"
+source "fs/ocfs2/Kconfig"
+source "fs/btrfs/Kconfig"
+
+endif # BLOCK
+
config FILE_LOCKING
bool "Enable POSIX file locking API" if EMBEDDED
default y
@@ -47,13 +54,6 @@
for filesystems like NFS and for the flock() system
call. Disabling this option saves about 11k.
-source "fs/xfs/Kconfig"
-source "fs/gfs2/Kconfig"
-source "fs/ocfs2/Kconfig"
-source "fs/btrfs/Kconfig"
-
-endif # BLOCK
-
source "fs/notify/Kconfig"
source "fs/quota/Kconfig"
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 9367b62..89cd2de 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -513,7 +513,7 @@
{
struct nls_table *nls = BEFS_SB(sb)->nls;
int i, o;
- wchar_t uni;
+ unicode_t uni;
int unilen, utflen;
char *result;
/* The utf8->nls conversion won't make the final nls string bigger
@@ -539,16 +539,16 @@
for (i = o = 0; i < in_len; i += utflen, o += unilen) {
/* convert from UTF-8 to Unicode */
- utflen = utf8_mbtowc(&uni, &in[i], in_len - i);
- if (utflen < 0) {
+ utflen = utf8_to_utf32(&in[i], in_len - i, &uni);
+ if (utflen < 0)
goto conv_err;
- }
/* convert from Unicode to nls */
- unilen = nls->uni2char(uni, &result[o], in_len - o);
- if (unilen < 0) {
+ if (uni > MAX_WCHAR_T)
goto conv_err;
- }
+ unilen = nls->uni2char(uni, &result[o], in_len - o);
+ if (unilen < 0)
+ goto conv_err;
}
result[o] = '\0';
*out_len = o;
@@ -619,15 +619,13 @@
/* convert from nls to unicode */
unilen = nls->char2uni(&in[i], in_len - i, &uni);
- if (unilen < 0) {
+ if (unilen < 0)
goto conv_err;
- }
/* convert from unicode to UTF-8 */
- utflen = utf8_wctomb(&result[o], uni, 3);
- if (utflen <= 0) {
+ utflen = utf32_to_utf8(uni, &result[o], 3);
+ if (utflen <= 0)
goto conv_err;
- }
}
result[o] = '\0';
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index 33a9012..4d74fc7 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -67,6 +67,8 @@
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_u8, debugfs_u8_get, debugfs_u8_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u8_ro, debugfs_u8_get, NULL, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u8_wo, NULL, debugfs_u8_set, "%llu\n");
/**
* debugfs_create_u8 - create a debugfs file that is used to read and write an unsigned 8-bit value
@@ -95,6 +97,13 @@
struct dentry *debugfs_create_u8(const char *name, mode_t mode,
struct dentry *parent, u8 *value)
{
+ /* if there are no write bits set, make read only */
+ if (!(mode & S_IWUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_u8_ro);
+ /* if there are no read bits set, make write only */
+ if (!(mode & S_IRUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_u8_wo);
+
return debugfs_create_file(name, mode, parent, value, &fops_u8);
}
EXPORT_SYMBOL_GPL(debugfs_create_u8);
@@ -110,6 +119,8 @@
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_u16, debugfs_u16_get, debugfs_u16_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u16_ro, debugfs_u16_get, NULL, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u16_wo, NULL, debugfs_u16_set, "%llu\n");
/**
* debugfs_create_u16 - create a debugfs file that is used to read and write an unsigned 16-bit value
@@ -138,6 +149,13 @@
struct dentry *debugfs_create_u16(const char *name, mode_t mode,
struct dentry *parent, u16 *value)
{
+ /* if there are no write bits set, make read only */
+ if (!(mode & S_IWUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_u16_ro);
+ /* if there are no read bits set, make write only */
+ if (!(mode & S_IRUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_u16_wo);
+
return debugfs_create_file(name, mode, parent, value, &fops_u16);
}
EXPORT_SYMBOL_GPL(debugfs_create_u16);
@@ -153,6 +171,8 @@
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_u32, debugfs_u32_get, debugfs_u32_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u32_ro, debugfs_u32_get, NULL, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u32_wo, NULL, debugfs_u32_set, "%llu\n");
/**
* debugfs_create_u32 - create a debugfs file that is used to read and write an unsigned 32-bit value
@@ -181,6 +201,13 @@
struct dentry *debugfs_create_u32(const char *name, mode_t mode,
struct dentry *parent, u32 *value)
{
+ /* if there are no write bits set, make read only */
+ if (!(mode & S_IWUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_u32_ro);
+ /* if there are no read bits set, make write only */
+ if (!(mode & S_IRUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_u32_wo);
+
return debugfs_create_file(name, mode, parent, value, &fops_u32);
}
EXPORT_SYMBOL_GPL(debugfs_create_u32);
@@ -197,6 +224,8 @@
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_u64, debugfs_u64_get, debugfs_u64_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u64_ro, debugfs_u64_get, NULL, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
/**
* debugfs_create_u64 - create a debugfs file that is used to read and write an unsigned 64-bit value
@@ -225,15 +254,28 @@
struct dentry *debugfs_create_u64(const char *name, mode_t mode,
struct dentry *parent, u64 *value)
{
+ /* if there are no write bits set, make read only */
+ if (!(mode & S_IWUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_u64_ro);
+ /* if there are no read bits set, make write only */
+ if (!(mode & S_IRUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_u64_wo);
+
return debugfs_create_file(name, mode, parent, value, &fops_u64);
}
EXPORT_SYMBOL_GPL(debugfs_create_u64);
DEFINE_SIMPLE_ATTRIBUTE(fops_x8, debugfs_u8_get, debugfs_u8_set, "0x%02llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_x8_ro, debugfs_u8_get, NULL, "0x%02llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_x8_wo, NULL, debugfs_u8_set, "0x%02llx\n");
DEFINE_SIMPLE_ATTRIBUTE(fops_x16, debugfs_u16_get, debugfs_u16_set, "0x%04llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_x16_ro, debugfs_u16_get, NULL, "0x%04llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_x16_wo, NULL, debugfs_u16_set, "0x%04llx\n");
DEFINE_SIMPLE_ATTRIBUTE(fops_x32, debugfs_u32_get, debugfs_u32_set, "0x%08llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_x32_ro, debugfs_u32_get, NULL, "0x%08llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_x32_wo, NULL, debugfs_u32_set, "0x%08llx\n");
/*
* debugfs_create_x{8,16,32} - create a debugfs file that is used to read and write an unsigned {8,16,32}-bit value
@@ -256,6 +298,13 @@
struct dentry *debugfs_create_x8(const char *name, mode_t mode,
struct dentry *parent, u8 *value)
{
+ /* if there are no write bits set, make read only */
+ if (!(mode & S_IWUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_x8_ro);
+ /* if there are no read bits set, make write only */
+ if (!(mode & S_IRUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_x8_wo);
+
return debugfs_create_file(name, mode, parent, value, &fops_x8);
}
EXPORT_SYMBOL_GPL(debugfs_create_x8);
@@ -273,6 +322,13 @@
struct dentry *debugfs_create_x16(const char *name, mode_t mode,
struct dentry *parent, u16 *value)
{
+ /* if there are no write bits set, make read only */
+ if (!(mode & S_IWUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_x16_ro);
+ /* if there are no read bits set, make write only */
+ if (!(mode & S_IRUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_x16_wo);
+
return debugfs_create_file(name, mode, parent, value, &fops_x16);
}
EXPORT_SYMBOL_GPL(debugfs_create_x16);
@@ -290,6 +346,13 @@
struct dentry *debugfs_create_x32(const char *name, mode_t mode,
struct dentry *parent, u32 *value)
{
+ /* if there are no write bits set, make read only */
+ if (!(mode & S_IWUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_x32_ro);
+ /* if there are no read bits set, make write only */
+ if (!(mode & S_IRUGO))
+ return debugfs_create_file(name, mode, parent, value, &fops_x32_wo);
+
return debugfs_create_file(name, mode, parent, value, &fops_x32);
}
EXPORT_SYMBOL_GPL(debugfs_create_x32);
@@ -419,7 +482,7 @@
};
/**
- * debugfs_create_blob - create a debugfs file that is used to read and write a binary blob
+ * debugfs_create_blob - create a debugfs file that is used to read a binary blob
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index 0662ba6..d22438e 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -403,6 +403,7 @@
}
child = list_entry(parent->d_subdirs.next, struct dentry,
d_u.d_child);
+ next_sibling:
/*
* If "child" isn't empty, walk down the tree and
@@ -417,6 +418,16 @@
__debugfs_remove(child, parent);
if (parent->d_subdirs.next == &child->d_u.d_child) {
/*
+ * Try the next sibling.
+ */
+ if (child->d_u.d_child.next != &parent->d_subdirs) {
+ child = list_entry(child->d_u.d_child.next,
+ struct dentry,
+ d_u.d_child);
+ goto next_sibling;
+ }
+
+ /*
* Avoid infinite loop if we fail to remove
* one dentry.
*/
diff --git a/fs/drop_caches.c b/fs/drop_caches.c
index b6a719a..a2edb79 100644
--- a/fs/drop_caches.c
+++ b/fs/drop_caches.c
@@ -24,7 +24,7 @@
continue;
__iget(inode);
spin_unlock(&inode_lock);
- __invalidate_mapping_pages(inode->i_mapping, 0, -1, true);
+ invalidate_mapping_pages(inode->i_mapping, 0, -1);
iput(toput_inode);
toput_inode = inode;
spin_lock(&inode_lock);
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 3b8e71b..38ff75a 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -22,6 +22,19 @@
#include <asm/uaccess.h>
#include "fat.h"
+/*
+ * Maximum buffer size of short name.
+ * [(MSDOS_NAME + '.') * max one char + nul]
+ * For msdos style, ['.' (hidden) + MSDOS_NAME + '.' + nul]
+ */
+#define FAT_MAX_SHORT_SIZE ((MSDOS_NAME + 1) * NLS_MAX_CHARSET_SIZE + 1)
+/*
+ * Maximum buffer size of unicode chars from slots.
+ * [(max longname slots * 13 (size in a slot) + nul) * sizeof(wchar_t)]
+ */
+#define FAT_MAX_UNI_CHARS ((MSDOS_SLOTS - 1) * 13 + 1)
+#define FAT_MAX_UNI_SIZE (FAT_MAX_UNI_CHARS * sizeof(wchar_t))
+
static inline loff_t fat_make_i_pos(struct super_block *sb,
struct buffer_head *bh,
struct msdos_dir_entry *de)
@@ -171,7 +184,8 @@
unsigned char *buf, int size)
{
if (sbi->options.utf8)
- return utf8_wcstombs(buf, uni, size);
+ return utf16s_to_utf8s(uni, FAT_MAX_UNI_CHARS,
+ UTF16_HOST_ENDIAN, buf, size);
else
return uni16_to_x8(buf, uni, size, sbi->options.unicode_xlate,
sbi->nls_io);
@@ -325,19 +339,6 @@
}
/*
- * Maximum buffer size of short name.
- * [(MSDOS_NAME + '.') * max one char + nul]
- * For msdos style, ['.' (hidden) + MSDOS_NAME + '.' + nul]
- */
-#define FAT_MAX_SHORT_SIZE ((MSDOS_NAME + 1) * NLS_MAX_CHARSET_SIZE + 1)
-/*
- * Maximum buffer size of unicode chars from slots.
- * [(max longname slots * 13 (size in a slot) + nul) * sizeof(wchar_t)]
- */
-#define FAT_MAX_UNI_CHARS ((MSDOS_SLOTS - 1) * 13 + 1)
-#define FAT_MAX_UNI_SIZE (FAT_MAX_UNI_CHARS * sizeof(wchar_t))
-
-/*
* Return values: negative -> error, 0 -> not found, positive -> found,
* value is the total amount of slots, including the shortname entry.
*/
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index 8d6fdcf..73471b7 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -502,11 +502,11 @@
if (utf8) {
int name_len = strlen(name);
- *outlen = utf8_mbstowcs((wchar_t *)outname, name, PATH_MAX);
+ *outlen = utf8s_to_utf16s(name, PATH_MAX, (wchar_t *) outname);
/*
* We stripped '.'s before and set len appropriately,
- * but utf8_mbstowcs doesn't care about len
+ * but utf8s_to_utf16s doesn't care about len
*/
*outlen -= (name_len - len);
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 1ad7031..a040b76 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -198,15 +198,19 @@
}
static void f_modown(struct file *filp, struct pid *pid, enum pid_type type,
- uid_t uid, uid_t euid, int force)
+ int force)
{
write_lock_irq(&filp->f_owner.lock);
if (force || !filp->f_owner.pid) {
put_pid(filp->f_owner.pid);
filp->f_owner.pid = get_pid(pid);
filp->f_owner.pid_type = type;
- filp->f_owner.uid = uid;
- filp->f_owner.euid = euid;
+
+ if (pid) {
+ const struct cred *cred = current_cred();
+ filp->f_owner.uid = cred->uid;
+ filp->f_owner.euid = cred->euid;
+ }
}
write_unlock_irq(&filp->f_owner.lock);
}
@@ -214,14 +218,13 @@
int __f_setown(struct file *filp, struct pid *pid, enum pid_type type,
int force)
{
- const struct cred *cred = current_cred();
int err;
-
+
err = security_file_set_fowner(filp);
if (err)
return err;
- f_modown(filp, pid, type, cred->uid, cred->euid, force);
+ f_modown(filp, pid, type, force);
return 0;
}
EXPORT_SYMBOL(__f_setown);
@@ -247,7 +250,7 @@
void f_delown(struct file *filp)
{
- f_modown(filp, NULL, PIDTYPE_PID, 0, 0, 1);
+ f_modown(filp, NULL, PIDTYPE_PID, 1);
}
pid_t f_getown(struct file *filp)
@@ -425,14 +428,20 @@
}
static void send_sigio_to_task(struct task_struct *p,
- struct fown_struct *fown,
+ struct fown_struct *fown,
int fd,
int reason)
{
- if (!sigio_perm(p, fown, fown->signum))
+ /*
+ * F_SETSIG can change ->signum lockless in parallel, make
+ * sure we read it once and use the same value throughout.
+ */
+ int signum = ACCESS_ONCE(fown->signum);
+
+ if (!sigio_perm(p, fown, signum))
return;
- switch (fown->signum) {
+ switch (signum) {
siginfo_t si;
default:
/* Queue a rt signal with the appropriate fd as its
@@ -441,7 +450,7 @@
delivered even if we can't queue. Failure to
queue in this case _should_ be reported; we fall
back to SIGIO in that case. --sct */
- si.si_signo = fown->signum;
+ si.si_signo = signum;
si.si_errno = 0;
si.si_code = reason;
/* Make sure we are called with one of the POLL_*
@@ -453,7 +462,7 @@
else
si.si_band = band_table[reason - POLL_IN];
si.si_fd = fd;
- if (!group_send_sig_info(fown->signum, &si, p))
+ if (!group_send_sig_info(signum, &si, p))
break;
/* fall-through: fall back on the old plain SIGIO signal */
case 0:
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 40308e9..caf0491 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -321,7 +321,7 @@
spin_lock(&inode_lock);
inode->i_state &= ~I_SYNC;
- if (!(inode->i_state & I_FREEING)) {
+ if (!(inode->i_state & (I_FREEING | I_CLEAR))) {
if (!(inode->i_state & I_DIRTY) &&
mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
/*
@@ -492,7 +492,7 @@
break;
}
- if (inode->i_state & I_NEW) {
+ if (inode->i_state & (I_NEW | I_WILL_FREE)) {
requeue_io(inode);
continue;
}
@@ -523,7 +523,7 @@
if (current_is_pdflush() && !writeback_acquire(bdi))
break;
- BUG_ON(inode->i_state & I_FREEING);
+ BUG_ON(inode->i_state & (I_FREEING | I_CLEAR));
__iget(inode);
pages_skipped = wbc->pages_skipped;
__writeback_single_inode(inode, wbc);
diff --git a/fs/isofs/joliet.c b/fs/isofs/joliet.c
index 92c14b8..a048de8 100644
--- a/fs/isofs/joliet.c
+++ b/fs/isofs/joliet.c
@@ -37,37 +37,6 @@
return (op - ascii);
}
-/* Convert big endian wide character string to utf8 */
-static int
-wcsntombs_be(__u8 *s, const __u8 *pwcs, int inlen, int maxlen)
-{
- const __u8 *ip;
- __u8 *op;
- int size;
- __u16 c;
-
- op = s;
- ip = pwcs;
- while ((*ip || ip[1]) && (maxlen > 0) && (inlen > 0)) {
- c = (*ip << 8) | ip[1];
- if (c > 0x7f) {
- size = utf8_wctomb(op, c, maxlen);
- if (size == -1) {
- /* Ignore character and move on */
- maxlen--;
- } else {
- op += size;
- maxlen -= size;
- }
- } else {
- *op++ = (__u8) c;
- }
- ip += 2;
- inlen--;
- }
- return (op - s);
-}
-
int
get_joliet_filename(struct iso_directory_record * de, unsigned char *outname, struct inode * inode)
{
@@ -79,8 +48,9 @@
nls = ISOFS_SB(inode->i_sb)->s_nls_iocharset;
if (utf8) {
- len = wcsntombs_be(outname, de->name,
- de->name_len[0] >> 1, PAGE_SIZE);
+ len = utf16s_to_utf8s((const wchar_t *) de->name,
+ de->name_len[0] >> 1, UTF16_BIG_ENDIAN,
+ outname, PAGE_SIZE);
} else {
len = uni16_to_x8(outname, (__be16 *) de->name,
de->name_len[0] >> 1, nls);
diff --git a/fs/jfs/jfs_extent.c b/fs/jfs/jfs_extent.c
index bbbd5f2..41d6045 100644
--- a/fs/jfs/jfs_extent.c
+++ b/fs/jfs/jfs_extent.c
@@ -391,6 +391,7 @@
}
XADaddress(xp, xaddr);
XADlength(xp, xlen);
+ XADoffset(xp, prev);
/*
* only preserve the abnr flag within the xad flags
* of the returned hint.
diff --git a/fs/ncpfs/ncplib_kernel.c b/fs/ncpfs/ncplib_kernel.c
index 97645f1..0ec6237 100644
--- a/fs/ncpfs/ncplib_kernel.c
+++ b/fs/ncpfs/ncplib_kernel.c
@@ -1113,11 +1113,13 @@
if (NCP_IS_FLAG(server, NCP_FLAG_UTF8)) {
int k;
+ unicode_t u;
- k = utf8_mbtowc(&ec, iname, iname_end - iname);
- if (k < 0)
+ k = utf8_to_utf32(iname, iname_end - iname, &u);
+ if (k < 0 || u > MAX_WCHAR_T)
return -EINVAL;
iname += k;
+ ec = u;
} else {
if (*iname == NCP_ESC) {
int k;
@@ -1214,7 +1216,7 @@
if (NCP_IS_FLAG(server, NCP_FLAG_UTF8)) {
int k;
- k = utf8_wctomb(iname, ec, iname_end - iname);
+ k = utf32_to_utf8(ec, iname, iname_end - iname);
if (k < 0) {
err = -ENAMETOOLONG;
goto quit;
diff --git a/fs/nfs/iostat.h b/fs/nfs/iostat.h
index a2ab252..ceda50a 100644
--- a/fs/nfs/iostat.h
+++ b/fs/nfs/iostat.h
@@ -31,7 +31,7 @@
cpu = get_cpu();
iostats = per_cpu_ptr(server->io_stats, cpu);
iostats->events[stat]++;
- put_cpu_no_resched();
+ put_cpu();
}
static inline void nfs_inc_stats(const struct inode *inode,
@@ -50,7 +50,7 @@
cpu = get_cpu();
iostats = per_cpu_ptr(server->io_stats, cpu);
iostats->bytes[stat] += addend;
- put_cpu_no_resched();
+ put_cpu();
}
static inline void nfs_add_stats(const struct inode *inode,
@@ -71,7 +71,7 @@
cpu = get_cpu();
iostats = per_cpu_ptr(NFS_SERVER(inode)->io_stats, cpu);
iostats->fscache[stat] += addend;
- put_cpu_no_resched();
+ put_cpu();
}
#endif
diff --git a/fs/nls/nls_base.c b/fs/nls/nls_base.c
index 9b0efda..477d37d 100644
--- a/fs/nls/nls_base.c
+++ b/fs/nls/nls_base.c
@@ -15,6 +15,7 @@
#include <linux/errno.h>
#include <linux/kmod.h>
#include <linux/spinlock.h>
+#include <asm/byteorder.h>
static struct nls_table default_table;
static struct nls_table *tables = &default_table;
@@ -43,10 +44,17 @@
{0, /* end of table */}
};
-int
-utf8_mbtowc(wchar_t *p, const __u8 *s, int n)
+#define UNICODE_MAX 0x0010ffff
+#define PLANE_SIZE 0x00010000
+
+#define SURROGATE_MASK 0xfffff800
+#define SURROGATE_PAIR 0x0000d800
+#define SURROGATE_LOW 0x00000400
+#define SURROGATE_BITS 0x000003ff
+
+int utf8_to_utf32(const u8 *s, int len, unicode_t *pu)
{
- long l;
+ unsigned long l;
int c0, c, nc;
const struct utf8_table *t;
@@ -57,12 +65,13 @@
nc++;
if ((c0 & t->cmask) == t->cval) {
l &= t->lmask;
- if (l < t->lval)
+ if (l < t->lval || l > UNICODE_MAX ||
+ (l & SURROGATE_MASK) == SURROGATE_PAIR)
return -1;
- *p = l;
+ *pu = (unicode_t) l;
return nc;
}
- if (n <= nc)
+ if (len <= nc)
return -1;
s++;
c = (*s ^ 0x80) & 0xFF;
@@ -72,90 +81,133 @@
}
return -1;
}
+EXPORT_SYMBOL(utf8_to_utf32);
-int
-utf8_mbstowcs(wchar_t *pwcs, const __u8 *s, int n)
+int utf32_to_utf8(unicode_t u, u8 *s, int maxlen)
{
- __u16 *op;
- const __u8 *ip;
- int size;
-
- op = pwcs;
- ip = s;
- while (*ip && n > 0) {
- if (*ip & 0x80) {
- size = utf8_mbtowc(op, ip, n);
- if (size == -1) {
- /* Ignore character and move on */
- ip++;
- n--;
- } else {
- op++;
- ip += size;
- n -= size;
- }
- } else {
- *op++ = *ip++;
- n--;
- }
- }
- return (op - pwcs);
-}
-
-int
-utf8_wctomb(__u8 *s, wchar_t wc, int maxlen)
-{
- long l;
+ unsigned long l;
int c, nc;
const struct utf8_table *t;
-
+
if (!s)
return 0;
-
- l = wc;
+
+ l = u;
+ if (l > UNICODE_MAX || (l & SURROGATE_MASK) == SURROGATE_PAIR)
+ return -1;
+
nc = 0;
for (t = utf8_table; t->cmask && maxlen; t++, maxlen--) {
nc++;
if (l <= t->lmask) {
c = t->shift;
- *s = t->cval | (l >> c);
+ *s = (u8) (t->cval | (l >> c));
while (c > 0) {
c -= 6;
s++;
- *s = 0x80 | ((l >> c) & 0x3F);
+ *s = (u8) (0x80 | ((l >> c) & 0x3F));
}
return nc;
}
}
return -1;
}
+EXPORT_SYMBOL(utf32_to_utf8);
-int
-utf8_wcstombs(__u8 *s, const wchar_t *pwcs, int maxlen)
+int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs)
{
- const __u16 *ip;
- __u8 *op;
+ u16 *op;
int size;
+ unicode_t u;
+
+ op = pwcs;
+ while (*s && len > 0) {
+ if (*s & 0x80) {
+ size = utf8_to_utf32(s, len, &u);
+ if (size < 0) {
+ /* Ignore character and move on */
+ size = 1;
+ } else if (u >= PLANE_SIZE) {
+ u -= PLANE_SIZE;
+ *op++ = (wchar_t) (SURROGATE_PAIR |
+ ((u >> 10) & SURROGATE_BITS));
+ *op++ = (wchar_t) (SURROGATE_PAIR |
+ SURROGATE_LOW |
+ (u & SURROGATE_BITS));
+ } else {
+ *op++ = (wchar_t) u;
+ }
+ s += size;
+ len -= size;
+ } else {
+ *op++ = *s++;
+ len--;
+ }
+ }
+ return op - pwcs;
+}
+EXPORT_SYMBOL(utf8s_to_utf16s);
+
+static inline unsigned long get_utf16(unsigned c, enum utf16_endian endian)
+{
+ switch (endian) {
+ default:
+ return c;
+ case UTF16_LITTLE_ENDIAN:
+ return __le16_to_cpu(c);
+ case UTF16_BIG_ENDIAN:
+ return __be16_to_cpu(c);
+ }
+}
+
+int utf16s_to_utf8s(const wchar_t *pwcs, int len, enum utf16_endian endian,
+ u8 *s, int maxlen)
+{
+ u8 *op;
+ int size;
+ unsigned long u, v;
op = s;
- ip = pwcs;
- while (*ip && maxlen > 0) {
- if (*ip > 0x7f) {
- size = utf8_wctomb(op, *ip, maxlen);
+ while (len > 0 && maxlen > 0) {
+ u = get_utf16(*pwcs, endian);
+ if (!u)
+ break;
+ pwcs++;
+ len--;
+ if (u > 0x7f) {
+ if ((u & SURROGATE_MASK) == SURROGATE_PAIR) {
+ if (u & SURROGATE_LOW) {
+ /* Ignore character and move on */
+ continue;
+ }
+ if (len <= 0)
+ break;
+ v = get_utf16(*pwcs, endian);
+ if ((v & SURROGATE_MASK) != SURROGATE_PAIR ||
+ !(v & SURROGATE_LOW)) {
+ /* Ignore character and move on */
+ continue;
+ }
+ u = PLANE_SIZE + ((u & SURROGATE_BITS) << 10)
+ + (v & SURROGATE_BITS);
+ pwcs++;
+ len--;
+ }
+ size = utf32_to_utf8(u, op, maxlen);
if (size == -1) {
/* Ignore character and move on */
- maxlen--;
} else {
op += size;
maxlen -= size;
}
} else {
- *op++ = (__u8) *ip;
+ *op++ = (u8) u;
+ maxlen--;
}
- ip++;
}
- return (op - s);
+ return op - s;
}
+EXPORT_SYMBOL(utf16s_to_utf8s);
int register_nls(struct nls_table * nls)
{
@@ -467,9 +519,5 @@
EXPORT_SYMBOL(unload_nls);
EXPORT_SYMBOL(load_nls);
EXPORT_SYMBOL(load_nls_default);
-EXPORT_SYMBOL(utf8_mbtowc);
-EXPORT_SYMBOL(utf8_mbstowcs);
-EXPORT_SYMBOL(utf8_wctomb);
-EXPORT_SYMBOL(utf8_wcstombs);
MODULE_LICENSE("Dual BSD/GPL");
diff --git a/fs/nls/nls_utf8.c b/fs/nls/nls_utf8.c
index aa2c42f..0d60a44 100644
--- a/fs/nls/nls_utf8.c
+++ b/fs/nls/nls_utf8.c
@@ -15,7 +15,11 @@
{
int n;
- if ( (n = utf8_wctomb(out, uni, boundlen)) == -1) {
+ if (boundlen <= 0)
+ return -ENAMETOOLONG;
+
+ n = utf32_to_utf8(uni, out, boundlen);
+ if (n < 0) {
*out = '?';
return -EINVAL;
}
@@ -25,11 +29,14 @@
static int char2uni(const unsigned char *rawstring, int boundlen, wchar_t *uni)
{
int n;
+ unicode_t u;
- if ( (n = utf8_mbtowc(uni, rawstring, boundlen)) == -1) {
+ n = utf8_to_utf32(rawstring, boundlen, &u);
+ if (n < 0 || u > MAX_WCHAR_T) {
*uni = 0x003f; /* ? */
- n = -EINVAL;
+ return -EINVAL;
}
+ *uni = (wchar_t) u;
return n;
}
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index 82c5085..9938034 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -27,6 +27,7 @@
#include <linux/pagemap.h>
#include <linux/quotaops.h>
#include <linux/slab.h>
+#include <linux/log2.h>
#include "aops.h"
#include "attrib.h"
@@ -1570,7 +1571,7 @@
ntfs_debug("Index collation rule is 0x%x.",
le32_to_cpu(ir->collation_rule));
ni->itype.index.block_size = le32_to_cpu(ir->index_block_size);
- if (ni->itype.index.block_size & (ni->itype.index.block_size - 1)) {
+ if (!is_power_of_2(ni->itype.index.block_size)) {
ntfs_error(vi->i_sb, "Index block size (%u) is not a power of "
"two.", ni->itype.index.block_size);
goto unm_err_out;
diff --git a/fs/ntfs/logfile.c b/fs/ntfs/logfile.c
index d7932e9..89b0298 100644
--- a/fs/ntfs/logfile.c
+++ b/fs/ntfs/logfile.c
@@ -26,6 +26,7 @@
#include <linux/highmem.h>
#include <linux/buffer_head.h>
#include <linux/bitops.h>
+#include <linux/log2.h>
#include "attrib.h"
#include "aops.h"
@@ -65,7 +66,7 @@
logfile_log_page_size < NTFS_BLOCK_SIZE ||
logfile_system_page_size &
(logfile_system_page_size - 1) ||
- logfile_log_page_size & (logfile_log_page_size - 1)) {
+ !is_power_of_2(logfile_log_page_size)) {
ntfs_error(vi->i_sb, "$LogFile uses unsupported page size.");
return false;
}
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 1539e63..3ce5ae9 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1006,7 +1006,12 @@
if (!task)
return -ESRCH;
- oom_adjust = task->oomkilladj;
+ task_lock(task);
+ if (task->mm)
+ oom_adjust = task->mm->oom_adj;
+ else
+ oom_adjust = OOM_DISABLE;
+ task_unlock(task);
put_task_struct(task);
len = snprintf(buffer, sizeof(buffer), "%i\n", oom_adjust);
@@ -1035,11 +1040,19 @@
task = get_proc_task(file->f_path.dentry->d_inode);
if (!task)
return -ESRCH;
- if (oom_adjust < task->oomkilladj && !capable(CAP_SYS_RESOURCE)) {
+ task_lock(task);
+ if (!task->mm) {
+ task_unlock(task);
+ put_task_struct(task);
+ return -EINVAL;
+ }
+ if (oom_adjust < task->mm->oom_adj && !capable(CAP_SYS_RESOURCE)) {
+ task_unlock(task);
put_task_struct(task);
return -EACCES;
}
- task->oomkilladj = oom_adjust;
+ task->mm->oom_adj = oom_adjust;
+ task_unlock(task);
put_task_struct(task);
if (end - buffer == 0)
return -EIO;
diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
index c6b0302..d5c410d 100644
--- a/fs/proc/meminfo.c
+++ b/fs/proc/meminfo.c
@@ -64,10 +64,8 @@
"Inactive(anon): %8lu kB\n"
"Active(file): %8lu kB\n"
"Inactive(file): %8lu kB\n"
-#ifdef CONFIG_UNEVICTABLE_LRU
"Unevictable: %8lu kB\n"
"Mlocked: %8lu kB\n"
-#endif
#ifdef CONFIG_HIGHMEM
"HighTotal: %8lu kB\n"
"HighFree: %8lu kB\n"
@@ -109,10 +107,8 @@
K(pages[LRU_INACTIVE_ANON]),
K(pages[LRU_ACTIVE_FILE]),
K(pages[LRU_INACTIVE_FILE]),
-#ifdef CONFIG_UNEVICTABLE_LRU
K(pages[LRU_UNEVICTABLE]),
K(global_page_state(NR_MLOCK)),
-#endif
#ifdef CONFIG_HIGHMEM
K(i.totalhigh),
K(i.freehigh),
diff --git a/fs/proc/page.c b/fs/proc/page.c
index e998383..2707c6c 100644
--- a/fs/proc/page.c
+++ b/fs/proc/page.c
@@ -6,11 +6,13 @@
#include <linux/mmzone.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/hugetlb.h>
#include <asm/uaccess.h>
#include "internal.h"
#define KPMSIZE sizeof(u64)
#define KPMMASK (KPMSIZE - 1)
+
/* /proc/kpagecount - an array exposing page counts
*
* Each entry is a u64 representing the corresponding
@@ -32,20 +34,22 @@
return -EINVAL;
while (count > 0) {
- ppage = NULL;
if (pfn_valid(pfn))
ppage = pfn_to_page(pfn);
- pfn++;
+ else
+ ppage = NULL;
if (!ppage)
pcount = 0;
else
pcount = page_mapcount(ppage);
- if (put_user(pcount, out++)) {
+ if (put_user(pcount, out)) {
ret = -EFAULT;
break;
}
+ pfn++;
+ out++;
count -= KPMSIZE;
}
@@ -68,19 +72,122 @@
/* These macros are used to decouple internal flags from exported ones */
-#define KPF_LOCKED 0
-#define KPF_ERROR 1
-#define KPF_REFERENCED 2
-#define KPF_UPTODATE 3
-#define KPF_DIRTY 4
-#define KPF_LRU 5
-#define KPF_ACTIVE 6
-#define KPF_SLAB 7
-#define KPF_WRITEBACK 8
-#define KPF_RECLAIM 9
-#define KPF_BUDDY 10
+#define KPF_LOCKED 0
+#define KPF_ERROR 1
+#define KPF_REFERENCED 2
+#define KPF_UPTODATE 3
+#define KPF_DIRTY 4
+#define KPF_LRU 5
+#define KPF_ACTIVE 6
+#define KPF_SLAB 7
+#define KPF_WRITEBACK 8
+#define KPF_RECLAIM 9
+#define KPF_BUDDY 10
-#define kpf_copy_bit(flags, dstpos, srcpos) (((flags >> srcpos) & 1) << dstpos)
+/* 11-20: new additions in 2.6.31 */
+#define KPF_MMAP 11
+#define KPF_ANON 12
+#define KPF_SWAPCACHE 13
+#define KPF_SWAPBACKED 14
+#define KPF_COMPOUND_HEAD 15
+#define KPF_COMPOUND_TAIL 16
+#define KPF_HUGE 17
+#define KPF_UNEVICTABLE 18
+#define KPF_NOPAGE 20
+
+/* kernel hacking assistances
+ * WARNING: subject to change, never rely on them!
+ */
+#define KPF_RESERVED 32
+#define KPF_MLOCKED 33
+#define KPF_MAPPEDTODISK 34
+#define KPF_PRIVATE 35
+#define KPF_PRIVATE_2 36
+#define KPF_OWNER_PRIVATE 37
+#define KPF_ARCH 38
+#define KPF_UNCACHED 39
+
+static inline u64 kpf_copy_bit(u64 kflags, int ubit, int kbit)
+{
+ return ((kflags >> kbit) & 1) << ubit;
+}
+
+static u64 get_uflags(struct page *page)
+{
+ u64 k;
+ u64 u;
+
+ /*
+ * pseudo flag: KPF_NOPAGE
+ * it differentiates a memory hole from a page with no flags
+ */
+ if (!page)
+ return 1 << KPF_NOPAGE;
+
+ k = page->flags;
+ u = 0;
+
+ /*
+ * pseudo flags for the well known (anonymous) memory mapped pages
+ *
+ * Note that page->_mapcount is overloaded in SLOB/SLUB/SLQB, so the
+ * simple test in page_mapped() is not enough.
+ */
+ if (!PageSlab(page) && page_mapped(page))
+ u |= 1 << KPF_MMAP;
+ if (PageAnon(page))
+ u |= 1 << KPF_ANON;
+
+ /*
+ * compound pages: export both head/tail info
+ * they together define a compound page's start/end pos and order
+ */
+ if (PageHead(page))
+ u |= 1 << KPF_COMPOUND_HEAD;
+ if (PageTail(page))
+ u |= 1 << KPF_COMPOUND_TAIL;
+ if (PageHuge(page))
+ u |= 1 << KPF_HUGE;
+
+ u |= kpf_copy_bit(k, KPF_LOCKED, PG_locked);
+
+ /*
+ * Caveats on high order pages:
+ * PG_buddy will only be set on the head page; SLUB/SLQB do the same
+ * for PG_slab; SLOB won't set PG_slab at all on compound pages.
+ */
+ u |= kpf_copy_bit(k, KPF_SLAB, PG_slab);
+ u |= kpf_copy_bit(k, KPF_BUDDY, PG_buddy);
+
+ u |= kpf_copy_bit(k, KPF_ERROR, PG_error);
+ u |= kpf_copy_bit(k, KPF_DIRTY, PG_dirty);
+ u |= kpf_copy_bit(k, KPF_UPTODATE, PG_uptodate);
+ u |= kpf_copy_bit(k, KPF_WRITEBACK, PG_writeback);
+
+ u |= kpf_copy_bit(k, KPF_LRU, PG_lru);
+ u |= kpf_copy_bit(k, KPF_REFERENCED, PG_referenced);
+ u |= kpf_copy_bit(k, KPF_ACTIVE, PG_active);
+ u |= kpf_copy_bit(k, KPF_RECLAIM, PG_reclaim);
+
+ u |= kpf_copy_bit(k, KPF_SWAPCACHE, PG_swapcache);
+ u |= kpf_copy_bit(k, KPF_SWAPBACKED, PG_swapbacked);
+
+ u |= kpf_copy_bit(k, KPF_UNEVICTABLE, PG_unevictable);
+ u |= kpf_copy_bit(k, KPF_MLOCKED, PG_mlocked);
+
+#ifdef CONFIG_IA64_UNCACHED_ALLOCATOR
+ u |= kpf_copy_bit(k, KPF_UNCACHED, PG_uncached);
+#endif
+
+ u |= kpf_copy_bit(k, KPF_RESERVED, PG_reserved);
+ u |= kpf_copy_bit(k, KPF_MAPPEDTODISK, PG_mappedtodisk);
+ u |= kpf_copy_bit(k, KPF_PRIVATE, PG_private);
+ u |= kpf_copy_bit(k, KPF_PRIVATE_2, PG_private_2);
+ u |= kpf_copy_bit(k, KPF_OWNER_PRIVATE, PG_owner_priv_1);
+ u |= kpf_copy_bit(k, KPF_ARCH, PG_arch_1);
+
+ return u;
+};
static ssize_t kpageflags_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
@@ -90,7 +197,6 @@
unsigned long src = *ppos;
unsigned long pfn;
ssize_t ret = 0;
- u64 kflags, uflags;
pfn = src / KPMSIZE;
count = min_t(unsigned long, count, (max_pfn * KPMSIZE) - src);
@@ -98,32 +204,18 @@
return -EINVAL;
while (count > 0) {
- ppage = NULL;
if (pfn_valid(pfn))
ppage = pfn_to_page(pfn);
- pfn++;
- if (!ppage)
- kflags = 0;
else
- kflags = ppage->flags;
+ ppage = NULL;
- uflags = kpf_copy_bit(kflags, KPF_LOCKED, PG_locked) |
- kpf_copy_bit(kflags, KPF_ERROR, PG_error) |
- kpf_copy_bit(kflags, KPF_REFERENCED, PG_referenced) |
- kpf_copy_bit(kflags, KPF_UPTODATE, PG_uptodate) |
- kpf_copy_bit(kflags, KPF_DIRTY, PG_dirty) |
- kpf_copy_bit(kflags, KPF_LRU, PG_lru) |
- kpf_copy_bit(kflags, KPF_ACTIVE, PG_active) |
- kpf_copy_bit(kflags, KPF_SLAB, PG_slab) |
- kpf_copy_bit(kflags, KPF_WRITEBACK, PG_writeback) |
- kpf_copy_bit(kflags, KPF_RECLAIM, PG_reclaim) |
- kpf_copy_bit(kflags, KPF_BUDDY, PG_buddy);
-
- if (put_user(uflags, out++)) {
+ if (put_user(get_uflags(ppage), out)) {
ret = -EFAULT;
break;
}
+ pfn++;
+ out++;
count -= KPMSIZE;
}
diff --git a/fs/select.c b/fs/select.c
index 0fe0e14..d870237 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -168,7 +168,7 @@
return table->entry++;
}
-static int pollwake(wait_queue_t *wait, unsigned mode, int sync, void *key)
+static int __pollwake(wait_queue_t *wait, unsigned mode, int sync, void *key)
{
struct poll_wqueues *pwq = wait->private;
DECLARE_WAITQUEUE(dummy_wait, pwq->polling_task);
@@ -194,6 +194,16 @@
return default_wake_function(&dummy_wait, mode, sync, key);
}
+static int pollwake(wait_queue_t *wait, unsigned mode, int sync, void *key)
+{
+ struct poll_table_entry *entry;
+
+ entry = container_of(wait, struct poll_table_entry, wait);
+ if (key && !((unsigned long)key & entry->key))
+ return 0;
+ return __pollwake(wait, mode, sync, key);
+}
+
/* Add a new entry */
static void __pollwait(struct file *filp, wait_queue_head_t *wait_address,
poll_table *p)
@@ -205,6 +215,7 @@
get_file(filp);
entry->filp = filp;
entry->wait_address = wait_address;
+ entry->key = p->key;
init_waitqueue_func_entry(&entry->wait, pollwake);
entry->wait.private = pwq;
add_wait_queue(wait_address, &entry->wait);
@@ -362,6 +373,18 @@
#define POLLOUT_SET (POLLWRBAND | POLLWRNORM | POLLOUT | POLLERR)
#define POLLEX_SET (POLLPRI)
+static inline void wait_key_set(poll_table *wait, unsigned long in,
+ unsigned long out, unsigned long bit)
+{
+ if (wait) {
+ wait->key = POLLEX_SET;
+ if (in & bit)
+ wait->key |= POLLIN_SET;
+ if (out & bit)
+ wait->key |= POLLOUT_SET;
+ }
+}
+
int do_select(int n, fd_set_bits *fds, struct timespec *end_time)
{
ktime_t expire, *to = NULL;
@@ -418,20 +441,25 @@
if (file) {
f_op = file->f_op;
mask = DEFAULT_POLLMASK;
- if (f_op && f_op->poll)
- mask = (*f_op->poll)(file, retval ? NULL : wait);
+ if (f_op && f_op->poll) {
+ wait_key_set(wait, in, out, bit);
+ mask = (*f_op->poll)(file, wait);
+ }
fput_light(file, fput_needed);
if ((mask & POLLIN_SET) && (in & bit)) {
res_in |= bit;
retval++;
+ wait = NULL;
}
if ((mask & POLLOUT_SET) && (out & bit)) {
res_out |= bit;
retval++;
+ wait = NULL;
}
if ((mask & POLLEX_SET) && (ex & bit)) {
res_ex |= bit;
retval++;
+ wait = NULL;
}
}
}
@@ -685,8 +713,12 @@
mask = POLLNVAL;
if (file != NULL) {
mask = DEFAULT_POLLMASK;
- if (file->f_op && file->f_op->poll)
+ if (file->f_op && file->f_op->poll) {
+ if (pwait)
+ pwait->key = pollfd->events |
+ POLLERR | POLLHUP;
mask = file->f_op->poll(file, pwait);
+ }
/* Mask out unneeded events. */
mask &= pollfd->events | POLLERR | POLLHUP;
fput_light(file, fput_needed);
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index a3ba217..1d897ad 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -192,8 +192,11 @@
{
int error = -ENOMEM;
unsigned long page = get_zeroed_page(GFP_KERNEL);
- if (page)
+ if (page) {
error = sysfs_getlink(dentry, (char *) page);
+ if (error < 0)
+ free_page((unsigned long)page);
+ }
nd_set_link(nd, error ? ERR_PTR(error) : (char *)page);
return NULL;
}
diff --git a/include/asm-generic/kmap_types.h b/include/asm-generic/kmap_types.h
index 58c3305..54e8b3d 100644
--- a/include/asm-generic/kmap_types.h
+++ b/include/asm-generic/kmap_types.h
@@ -1,7 +1,7 @@
#ifndef _ASM_GENERIC_KMAP_TYPES_H
#define _ASM_GENERIC_KMAP_TYPES_H
-#ifdef CONFIG_DEBUG_HIGHMEM
+#ifdef __WITH_KM_FENCE
# define D(n) __KM_FENCE_##n ,
#else
# define D(n)
diff --git a/include/linux/bug.h b/include/linux/bug.h
index 54398d2..d276b55 100644
--- a/include/linux/bug.h
+++ b/include/linux/bug.h
@@ -1,7 +1,6 @@
#ifndef _LINUX_BUG_H
#define _LINUX_BUG_H
-#include <linux/module.h>
#include <asm/bug.h>
enum bug_trap_type {
@@ -24,10 +23,6 @@
enum bug_trap_type report_bug(unsigned long bug_addr, struct pt_regs *regs);
-int module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
- struct module *);
-void module_bug_cleanup(struct module *);
-
/* These are defined by the architecture */
int is_valid_bugaddr(unsigned long addr);
@@ -38,13 +33,6 @@
{
return BUG_TRAP_TYPE_BUG;
}
-static inline int module_bug_finalize(const Elf_Ehdr *hdr,
- const Elf_Shdr *sechdrs,
- struct module *mod)
-{
- return 0;
-}
-static inline void module_bug_cleanup(struct module *mod) {}
#endif /* CONFIG_GENERIC_BUG */
#endif /* _LINUX_BUG_H */
diff --git a/include/linux/c2port.h b/include/linux/c2port.h
index 7b5a238..2a5cd86 100644
--- a/include/linux/c2port.h
+++ b/include/linux/c2port.h
@@ -10,6 +10,7 @@
*/
#include <linux/device.h>
+#include <linux/kmemcheck.h>
#define C2PORT_NAME_LEN 32
@@ -20,8 +21,10 @@
/* Main struct */
struct c2port_ops;
struct c2port_device {
+ kmemcheck_bitfield_begin(flags);
unsigned int access:1;
unsigned int flash_access:1;
+ kmemcheck_bitfield_end(flags);
int id;
char name[C2PORT_NAME_LEN];
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
index 05ea1dd..a5740fc 100644
--- a/include/linux/cpuset.h
+++ b/include/linux/cpuset.h
@@ -18,7 +18,6 @@
extern int number_of_cpusets; /* How many cpusets are defined in system? */
-extern int cpuset_init_early(void);
extern int cpuset_init(void);
extern void cpuset_init_smp(void);
extern void cpuset_cpus_allowed(struct task_struct *p, struct cpumask *mask);
@@ -27,7 +26,6 @@
extern nodemask_t cpuset_mems_allowed(struct task_struct *p);
#define cpuset_current_mems_allowed (current->mems_allowed)
void cpuset_init_current_mems_allowed(void);
-void cpuset_update_task_memory_state(void);
int cpuset_nodemask_valid_mems_allowed(nodemask_t *nodemask);
extern int __cpuset_node_allowed_softwall(int node, gfp_t gfp_mask);
@@ -92,9 +90,13 @@
extern void cpuset_print_task_mems_allowed(struct task_struct *p);
+static inline void set_mems_allowed(nodemask_t nodemask)
+{
+ current->mems_allowed = nodemask;
+}
+
#else /* !CONFIG_CPUSETS */
-static inline int cpuset_init_early(void) { return 0; }
static inline int cpuset_init(void) { return 0; }
static inline void cpuset_init_smp(void) {}
@@ -116,7 +118,6 @@
#define cpuset_current_mems_allowed (node_states[N_HIGH_MEMORY])
static inline void cpuset_init_current_mems_allowed(void) {}
-static inline void cpuset_update_task_memory_state(void) {}
static inline int cpuset_nodemask_valid_mems_allowed(nodemask_t *nodemask)
{
@@ -188,6 +189,10 @@
{
}
+static inline void set_mems_allowed(nodemask_t nodemask)
+{
+}
+
#endif /* !CONFIG_CPUSETS */
#endif /* _LINUX_CPUSET_H */
diff --git a/include/linux/device.h b/include/linux/device.h
index a4a7b10..ed4e39f 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -114,6 +114,8 @@
#define BUS_NOTIFY_BOUND_DRIVER 0x00000003 /* driver bound to device */
#define BUS_NOTIFY_UNBIND_DRIVER 0x00000004 /* driver about to be
unbound */
+#define BUS_NOTIFY_UNBOUND_DRIVER 0x00000005 /* driver is unbound
+ from the device */
extern struct kset *bus_get_kset(struct bus_type *bus);
extern struct klist *bus_get_device_klist(struct bus_type *bus);
@@ -192,6 +194,7 @@
struct kobject *dev_kobj;
int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env);
+ char *(*nodename)(struct device *dev);
void (*class_release)(struct class *class);
void (*dev_release)(struct device *dev);
@@ -287,6 +290,7 @@
const char *name;
struct attribute_group **groups;
int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
+ char *(*nodename)(struct device *dev);
void (*release)(struct device *dev);
struct dev_pm_ops *pm;
@@ -486,6 +490,7 @@
extern int device_rename(struct device *dev, char *new_name);
extern int device_move(struct device *dev, struct device *new_parent,
enum dpm_order dpm_order);
+extern const char *device_get_nodename(struct device *dev, const char **tmp);
/*
* Root device objects for grouping under /sys/devices
diff --git a/include/linux/eisa.h b/include/linux/eisa.h
index e61c0be..6925249 100644
--- a/include/linux/eisa.h
+++ b/include/linux/eisa.h
@@ -78,12 +78,12 @@
/* Mimics pci.h... */
static inline void *eisa_get_drvdata (struct eisa_device *edev)
{
- return edev->dev.driver_data;
+ return dev_get_drvdata(&edev->dev);
}
static inline void eisa_set_drvdata (struct eisa_device *edev, void *data)
{
- edev->dev.driver_data = data;
+ dev_set_drvdata(&edev->dev, data);
}
/* The EISA root device. There's rumours about machines with multiple
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 330c4b1..dd68358 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -677,6 +677,9 @@
/* get capability given var */
void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps,
struct fb_var_screeninfo *var);
+
+ /* teardown any resources to do with this framebuffer */
+ void (*fb_destroy)(struct fb_info *info);
};
#ifdef CONFIG_FB_TILEBLITTING
@@ -786,6 +789,8 @@
#define FBINFO_MISC_USEREVENT 0x10000 /* event request
from userspace */
#define FBINFO_MISC_TILEBLITTING 0x20000 /* use tile blitting */
+#define FBINFO_MISC_FIRMWARE 0x40000 /* a replaceable firmware
+ inited framebuffer */
/* A driver may set this flag to indicate that it does want a set_par to be
* called every time when fbcon_switch is executed. The advantage is that with
@@ -854,7 +859,12 @@
u32 state; /* Hardware state i.e suspend */
void *fbcon_par; /* fbcon use-only private area */
/* From here on everything is device dependent */
- void *par;
+ void *par;
+ /* we need the PCI or similiar aperture base/size not
+ smem_start/size as smem_start may just be an object
+ allocated inside the aperture so may not actually overlap */
+ resource_size_t aperture_base;
+ resource_size_t aperture_size;
};
#ifdef MODULE
@@ -893,7 +903,7 @@
#define fb_writeq sbus_writeq
#define fb_memset sbus_memset_io
-#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__avr32__)
+#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__avr32__) || defined(__bfin__)
#define fb_readb __raw_readb
#define fb_readw __raw_readw
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
new file mode 100644
index 0000000..e584b72
--- /dev/null
+++ b/include/linux/firewire.h
@@ -0,0 +1,358 @@
+#ifndef _LINUX_FIREWIRE_H
+#define _LINUX_FIREWIRE_H
+
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/sysfs.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <asm/atomic.h>
+#include <asm/byteorder.h>
+
+#define fw_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, ## args)
+#define fw_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args)
+
+static inline void fw_memcpy_from_be32(void *_dst, void *_src, size_t size)
+{
+ u32 *dst = _dst;
+ __be32 *src = _src;
+ int i;
+
+ for (i = 0; i < size / 4; i++)
+ dst[i] = be32_to_cpu(src[i]);
+}
+
+static inline void fw_memcpy_to_be32(void *_dst, void *_src, size_t size)
+{
+ fw_memcpy_from_be32(_dst, _src, size);
+}
+#define CSR_REGISTER_BASE 0xfffff0000000ULL
+
+/* register offsets are relative to CSR_REGISTER_BASE */
+#define CSR_STATE_CLEAR 0x0
+#define CSR_STATE_SET 0x4
+#define CSR_NODE_IDS 0x8
+#define CSR_RESET_START 0xc
+#define CSR_SPLIT_TIMEOUT_HI 0x18
+#define CSR_SPLIT_TIMEOUT_LO 0x1c
+#define CSR_CYCLE_TIME 0x200
+#define CSR_BUS_TIME 0x204
+#define CSR_BUSY_TIMEOUT 0x210
+#define CSR_BUS_MANAGER_ID 0x21c
+#define CSR_BANDWIDTH_AVAILABLE 0x220
+#define CSR_CHANNELS_AVAILABLE 0x224
+#define CSR_CHANNELS_AVAILABLE_HI 0x224
+#define CSR_CHANNELS_AVAILABLE_LO 0x228
+#define CSR_BROADCAST_CHANNEL 0x234
+#define CSR_CONFIG_ROM 0x400
+#define CSR_CONFIG_ROM_END 0x800
+#define CSR_FCP_COMMAND 0xB00
+#define CSR_FCP_RESPONSE 0xD00
+#define CSR_FCP_END 0xF00
+#define CSR_TOPOLOGY_MAP 0x1000
+#define CSR_TOPOLOGY_MAP_END 0x1400
+#define CSR_SPEED_MAP 0x2000
+#define CSR_SPEED_MAP_END 0x3000
+
+#define CSR_OFFSET 0x40
+#define CSR_LEAF 0x80
+#define CSR_DIRECTORY 0xc0
+
+#define CSR_DESCRIPTOR 0x01
+#define CSR_VENDOR 0x03
+#define CSR_HARDWARE_VERSION 0x04
+#define CSR_NODE_CAPABILITIES 0x0c
+#define CSR_UNIT 0x11
+#define CSR_SPECIFIER_ID 0x12
+#define CSR_VERSION 0x13
+#define CSR_DEPENDENT_INFO 0x14
+#define CSR_MODEL 0x17
+#define CSR_INSTANCE 0x18
+#define CSR_DIRECTORY_ID 0x20
+
+struct fw_csr_iterator {
+ u32 *p;
+ u32 *end;
+};
+
+void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 *p);
+int fw_csr_iterator_next(struct fw_csr_iterator *ci, int *key, int *value);
+
+extern struct bus_type fw_bus_type;
+
+struct fw_card_driver;
+struct fw_node;
+
+struct fw_card {
+ const struct fw_card_driver *driver;
+ struct device *device;
+ struct kref kref;
+ struct completion done;
+
+ int node_id;
+ int generation;
+ int current_tlabel;
+ u64 tlabel_mask;
+ struct list_head transaction_list;
+ struct timer_list flush_timer;
+ unsigned long reset_jiffies;
+
+ unsigned long long guid;
+ unsigned max_receive;
+ int link_speed;
+ int config_rom_generation;
+
+ spinlock_t lock; /* Take this lock when handling the lists in
+ * this struct. */
+ struct fw_node *local_node;
+ struct fw_node *root_node;
+ struct fw_node *irm_node;
+ u8 color; /* must be u8 to match the definition in struct fw_node */
+ int gap_count;
+ bool beta_repeaters_present;
+
+ int index;
+
+ struct list_head link;
+
+ /* Work struct for BM duties. */
+ struct delayed_work work;
+ int bm_retries;
+ int bm_generation;
+
+ bool broadcast_channel_allocated;
+ u32 broadcast_channel;
+ u32 topology_map[(CSR_TOPOLOGY_MAP_END - CSR_TOPOLOGY_MAP) / 4];
+};
+
+static inline struct fw_card *fw_card_get(struct fw_card *card)
+{
+ kref_get(&card->kref);
+
+ return card;
+}
+
+void fw_card_release(struct kref *kref);
+
+static inline void fw_card_put(struct fw_card *card)
+{
+ kref_put(&card->kref, fw_card_release);
+}
+
+struct fw_attribute_group {
+ struct attribute_group *groups[2];
+ struct attribute_group group;
+ struct attribute *attrs[12];
+};
+
+enum fw_device_state {
+ FW_DEVICE_INITIALIZING,
+ FW_DEVICE_RUNNING,
+ FW_DEVICE_GONE,
+ FW_DEVICE_SHUTDOWN,
+};
+
+/*
+ * Note, fw_device.generation always has to be read before fw_device.node_id.
+ * Use SMP memory barriers to ensure this. Otherwise requests will be sent
+ * to an outdated node_id if the generation was updated in the meantime due
+ * to a bus reset.
+ *
+ * Likewise, fw-core will take care to update .node_id before .generation so
+ * that whenever fw_device.generation is current WRT the actual bus generation,
+ * fw_device.node_id is guaranteed to be current too.
+ *
+ * The same applies to fw_device.card->node_id vs. fw_device.generation.
+ *
+ * fw_device.config_rom and fw_device.config_rom_length may be accessed during
+ * the lifetime of any fw_unit belonging to the fw_device, before device_del()
+ * was called on the last fw_unit. Alternatively, they may be accessed while
+ * holding fw_device_rwsem.
+ */
+struct fw_device {
+ atomic_t state;
+ struct fw_node *node;
+ int node_id;
+ int generation;
+ unsigned max_speed;
+ struct fw_card *card;
+ struct device device;
+
+ struct mutex client_list_mutex;
+ struct list_head client_list;
+
+ u32 *config_rom;
+ size_t config_rom_length;
+ int config_rom_retries;
+ unsigned is_local:1;
+ unsigned max_rec:4;
+ unsigned cmc:1;
+ unsigned irmc:1;
+ unsigned bc_implemented:2;
+
+ struct delayed_work work;
+ struct fw_attribute_group attribute_group;
+};
+
+static inline struct fw_device *fw_device(struct device *dev)
+{
+ return container_of(dev, struct fw_device, device);
+}
+
+static inline int fw_device_is_shutdown(struct fw_device *device)
+{
+ return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN;
+}
+
+static inline struct fw_device *fw_device_get(struct fw_device *device)
+{
+ get_device(&device->device);
+
+ return device;
+}
+
+static inline void fw_device_put(struct fw_device *device)
+{
+ put_device(&device->device);
+}
+
+int fw_device_enable_phys_dma(struct fw_device *device);
+
+/*
+ * fw_unit.directory must not be accessed after device_del(&fw_unit.device).
+ */
+struct fw_unit {
+ struct device device;
+ u32 *directory;
+ struct fw_attribute_group attribute_group;
+};
+
+static inline struct fw_unit *fw_unit(struct device *dev)
+{
+ return container_of(dev, struct fw_unit, device);
+}
+
+static inline struct fw_unit *fw_unit_get(struct fw_unit *unit)
+{
+ get_device(&unit->device);
+
+ return unit;
+}
+
+static inline void fw_unit_put(struct fw_unit *unit)
+{
+ put_device(&unit->device);
+}
+
+static inline struct fw_device *fw_parent_device(struct fw_unit *unit)
+{
+ return fw_device(unit->device.parent);
+}
+
+struct ieee1394_device_id;
+
+struct fw_driver {
+ struct device_driver driver;
+ /* Called when the parent device sits through a bus reset. */
+ void (*update)(struct fw_unit *unit);
+ const struct ieee1394_device_id *id_table;
+};
+
+struct fw_packet;
+struct fw_request;
+
+typedef void (*fw_packet_callback_t)(struct fw_packet *packet,
+ struct fw_card *card, int status);
+typedef void (*fw_transaction_callback_t)(struct fw_card *card, int rcode,
+ void *data, size_t length,
+ void *callback_data);
+/*
+ * Important note: The callback must guarantee that either fw_send_response()
+ * or kfree() is called on the @request.
+ */
+typedef void (*fw_address_callback_t)(struct fw_card *card,
+ struct fw_request *request,
+ int tcode, int destination, int source,
+ int generation, int speed,
+ unsigned long long offset,
+ void *data, size_t length,
+ void *callback_data);
+
+struct fw_packet {
+ int speed;
+ int generation;
+ u32 header[4];
+ size_t header_length;
+ void *payload;
+ size_t payload_length;
+ dma_addr_t payload_bus;
+ u32 timestamp;
+
+ /*
+ * This callback is called when the packet transmission has
+ * completed; for successful transmission, the status code is
+ * the ack received from the destination, otherwise it's a
+ * negative errno: ENOMEM, ESTALE, ETIMEDOUT, ENODEV, EIO.
+ * The callback can be called from tasklet context and thus
+ * must never block.
+ */
+ fw_packet_callback_t callback;
+ int ack;
+ struct list_head link;
+ void *driver_data;
+};
+
+struct fw_transaction {
+ int node_id; /* The generation is implied; it is always the current. */
+ int tlabel;
+ int timestamp;
+ struct list_head link;
+
+ struct fw_packet packet;
+
+ /*
+ * The data passed to the callback is valid only during the
+ * callback.
+ */
+ fw_transaction_callback_t callback;
+ void *callback_data;
+};
+
+struct fw_address_handler {
+ u64 offset;
+ size_t length;
+ fw_address_callback_t address_callback;
+ void *callback_data;
+ struct list_head link;
+};
+
+struct fw_address_region {
+ u64 start;
+ u64 end;
+};
+
+extern const struct fw_address_region fw_high_memory_region;
+
+int fw_core_add_address_handler(struct fw_address_handler *handler,
+ const struct fw_address_region *region);
+void fw_core_remove_address_handler(struct fw_address_handler *handler);
+void fw_send_response(struct fw_card *card,
+ struct fw_request *request, int rcode);
+void fw_send_request(struct fw_card *card, struct fw_transaction *t,
+ int tcode, int destination_id, int generation, int speed,
+ unsigned long long offset, void *payload, size_t length,
+ fw_transaction_callback_t callback, void *callback_data);
+int fw_cancel_transaction(struct fw_card *card,
+ struct fw_transaction *transaction);
+int fw_run_transaction(struct fw_card *card, int tcode, int destination_id,
+ int generation, int speed, unsigned long long offset,
+ void *payload, size_t length);
+
+#endif /* _LINUX_FIREWIRE_H */
diff --git a/include/linux/firmware-map.h b/include/linux/firmware-map.h
index cca686b..875451f 100644
--- a/include/linux/firmware-map.h
+++ b/include/linux/firmware-map.h
@@ -24,21 +24,17 @@
*/
#ifdef CONFIG_FIRMWARE_MEMMAP
-int firmware_map_add(resource_size_t start, resource_size_t end,
- const char *type);
-int firmware_map_add_early(resource_size_t start, resource_size_t end,
- const char *type);
+int firmware_map_add(u64 start, u64 end, const char *type);
+int firmware_map_add_early(u64 start, u64 end, const char *type);
#else /* CONFIG_FIRMWARE_MEMMAP */
-static inline int firmware_map_add(resource_size_t start, resource_size_t end,
- const char *type)
+static inline int firmware_map_add(u64 start, u64 end, const char *type)
{
return 0;
}
-static inline int firmware_map_add_early(resource_size_t start,
- resource_size_t end, const char *type)
+static inline int firmware_map_add_early(u64 start, u64 end, const char *type)
{
return 0;
}
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index c8ecf5b..d315446 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -5,7 +5,6 @@
#include <linux/types.h>
#include <linux/compiler.h>
-#define FIRMWARE_NAME_MAX 30
#define FW_ACTION_NOHOTPLUG 0
#define FW_ACTION_HOTPLUG 1
diff --git a/include/linux/fs.h b/include/linux/fs.h
index ede84fa..74a5793 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -879,7 +879,7 @@
there are only # of pages ahead */
unsigned int ra_pages; /* Maximum readahead window */
- int mmap_miss; /* Cache miss stat for mmap accesses */
+ unsigned int mmap_miss; /* Cache miss stat for mmap accesses */
loff_t prev_pos; /* Cache last read() position */
};
@@ -1919,8 +1919,9 @@
extern struct kmem_cache *names_cachep;
-#define __getname() kmem_cache_alloc(names_cachep, GFP_KERNEL)
-#define __putname(name) kmem_cache_free(names_cachep, (void *)(name))
+#define __getname_gfp(gfp) kmem_cache_alloc(names_cachep, (gfp))
+#define __getname() __getname_gfp(GFP_KERNEL)
+#define __putname(name) kmem_cache_free(names_cachep, (void *)(name))
#ifndef CONFIG_AUDITSYSCALL
#define putname(name) __putname(name)
#else
@@ -2036,9 +2037,6 @@
extern int invalidate_partition(struct gendisk *, int);
#endif
extern int invalidate_inodes(struct super_block *);
-unsigned long __invalidate_mapping_pages(struct address_space *mapping,
- pgoff_t start, pgoff_t end,
- bool be_atomic);
unsigned long invalidate_mapping_pages(struct address_space *mapping,
pgoff_t start, pgoff_t end);
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 7cbd38d..45fc320 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -142,7 +142,7 @@
* disks that can't be partitioned. */
char disk_name[DISK_NAME_LEN]; /* name of major driver */
-
+ char *(*nodename)(struct gendisk *gd);
/* Array of pointers to partitions indexed by partno.
* Protected with matching bdev lock but stat and other
* non-critical accesses use RCU. Always access through
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index 3760e7c..cfdb35d 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -5,6 +5,7 @@
#include <linux/stddef.h>
#include <linux/linkage.h>
#include <linux/topology.h>
+#include <linux/mmdebug.h>
struct vm_area_struct;
@@ -20,7 +21,8 @@
#define __GFP_DMA ((__force gfp_t)0x01u)
#define __GFP_HIGHMEM ((__force gfp_t)0x02u)
#define __GFP_DMA32 ((__force gfp_t)0x04u)
-
+#define __GFP_MOVABLE ((__force gfp_t)0x08u) /* Page is movable */
+#define GFP_ZONEMASK (__GFP_DMA|__GFP_HIGHMEM|__GFP_DMA32|__GFP_MOVABLE)
/*
* Action modifiers - doesn't change the zoning
*
@@ -50,9 +52,20 @@
#define __GFP_HARDWALL ((__force gfp_t)0x20000u) /* Enforce hardwall cpuset memory allocs */
#define __GFP_THISNODE ((__force gfp_t)0x40000u)/* No fallback, no policies */
#define __GFP_RECLAIMABLE ((__force gfp_t)0x80000u) /* Page is reclaimable */
-#define __GFP_MOVABLE ((__force gfp_t)0x100000u) /* Page is movable */
-#define __GFP_BITS_SHIFT 21 /* Room for 21 __GFP_FOO bits */
+#ifdef CONFIG_KMEMCHECK
+#define __GFP_NOTRACK ((__force gfp_t)0x200000u) /* Don't track with kmemcheck */
+#else
+#define __GFP_NOTRACK ((__force gfp_t)0)
+#endif
+
+/*
+ * This may seem redundant, but it's a way of annotating false positives vs.
+ * allocations that simply cannot be supported (e.g. page tables).
+ */
+#define __GFP_NOTRACK_FALSE_POSITIVE (__GFP_NOTRACK)
+
+#define __GFP_BITS_SHIFT 22 /* Room for 22 __GFP_FOO bits */
#define __GFP_BITS_MASK ((__force gfp_t)((1 << __GFP_BITS_SHIFT) - 1))
/* This equals 0, but use constants in case they ever change */
@@ -115,24 +128,105 @@
((gfp_flags & __GFP_RECLAIMABLE) != 0);
}
+#ifdef CONFIG_HIGHMEM
+#define OPT_ZONE_HIGHMEM ZONE_HIGHMEM
+#else
+#define OPT_ZONE_HIGHMEM ZONE_NORMAL
+#endif
+
+#ifdef CONFIG_ZONE_DMA
+#define OPT_ZONE_DMA ZONE_DMA
+#else
+#define OPT_ZONE_DMA ZONE_NORMAL
+#endif
+
+#ifdef CONFIG_ZONE_DMA32
+#define OPT_ZONE_DMA32 ZONE_DMA32
+#else
+#define OPT_ZONE_DMA32 ZONE_NORMAL
+#endif
+
+/*
+ * GFP_ZONE_TABLE is a word size bitstring that is used for looking up the
+ * zone to use given the lowest 4 bits of gfp_t. Entries are ZONE_SHIFT long
+ * and there are 16 of them to cover all possible combinations of
+ * __GFP_DMA, __GFP_DMA32, __GFP_MOVABLE and __GFP_HIGHMEM
+ *
+ * The zone fallback order is MOVABLE=>HIGHMEM=>NORMAL=>DMA32=>DMA.
+ * But GFP_MOVABLE is not only a zone specifier but also an allocation
+ * policy. Therefore __GFP_MOVABLE plus another zone selector is valid.
+ * Only 1bit of the lowest 3 bit (DMA,DMA32,HIGHMEM) can be set to "1".
+ *
+ * bit result
+ * =================
+ * 0x0 => NORMAL
+ * 0x1 => DMA or NORMAL
+ * 0x2 => HIGHMEM or NORMAL
+ * 0x3 => BAD (DMA+HIGHMEM)
+ * 0x4 => DMA32 or DMA or NORMAL
+ * 0x5 => BAD (DMA+DMA32)
+ * 0x6 => BAD (HIGHMEM+DMA32)
+ * 0x7 => BAD (HIGHMEM+DMA32+DMA)
+ * 0x8 => NORMAL (MOVABLE+0)
+ * 0x9 => DMA or NORMAL (MOVABLE+DMA)
+ * 0xa => MOVABLE (Movable is valid only if HIGHMEM is set too)
+ * 0xb => BAD (MOVABLE+HIGHMEM+DMA)
+ * 0xc => DMA32 (MOVABLE+HIGHMEM+DMA32)
+ * 0xd => BAD (MOVABLE+DMA32+DMA)
+ * 0xe => BAD (MOVABLE+DMA32+HIGHMEM)
+ * 0xf => BAD (MOVABLE+DMA32+HIGHMEM+DMA)
+ *
+ * ZONES_SHIFT must be <= 2 on 32 bit platforms.
+ */
+
+#if 16 * ZONES_SHIFT > BITS_PER_LONG
+#error ZONES_SHIFT too large to create GFP_ZONE_TABLE integer
+#endif
+
+#define GFP_ZONE_TABLE ( \
+ (ZONE_NORMAL << 0 * ZONES_SHIFT) \
+ | (OPT_ZONE_DMA << __GFP_DMA * ZONES_SHIFT) \
+ | (OPT_ZONE_HIGHMEM << __GFP_HIGHMEM * ZONES_SHIFT) \
+ | (OPT_ZONE_DMA32 << __GFP_DMA32 * ZONES_SHIFT) \
+ | (ZONE_NORMAL << __GFP_MOVABLE * ZONES_SHIFT) \
+ | (OPT_ZONE_DMA << (__GFP_MOVABLE | __GFP_DMA) * ZONES_SHIFT) \
+ | (ZONE_MOVABLE << (__GFP_MOVABLE | __GFP_HIGHMEM) * ZONES_SHIFT)\
+ | (OPT_ZONE_DMA32 << (__GFP_MOVABLE | __GFP_DMA32) * ZONES_SHIFT)\
+)
+
+/*
+ * GFP_ZONE_BAD is a bitmap for all combination of __GFP_DMA, __GFP_DMA32
+ * __GFP_HIGHMEM and __GFP_MOVABLE that are not permitted. One flag per
+ * entry starting with bit 0. Bit is set if the combination is not
+ * allowed.
+ */
+#define GFP_ZONE_BAD ( \
+ 1 << (__GFP_DMA | __GFP_HIGHMEM) \
+ | 1 << (__GFP_DMA | __GFP_DMA32) \
+ | 1 << (__GFP_DMA32 | __GFP_HIGHMEM) \
+ | 1 << (__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM) \
+ | 1 << (__GFP_MOVABLE | __GFP_HIGHMEM | __GFP_DMA) \
+ | 1 << (__GFP_MOVABLE | __GFP_DMA32 | __GFP_DMA) \
+ | 1 << (__GFP_MOVABLE | __GFP_DMA32 | __GFP_HIGHMEM) \
+ | 1 << (__GFP_MOVABLE | __GFP_DMA32 | __GFP_DMA | __GFP_HIGHMEM)\
+)
+
static inline enum zone_type gfp_zone(gfp_t flags)
{
-#ifdef CONFIG_ZONE_DMA
- if (flags & __GFP_DMA)
- return ZONE_DMA;
+ enum zone_type z;
+ int bit = flags & GFP_ZONEMASK;
+
+ z = (GFP_ZONE_TABLE >> (bit * ZONES_SHIFT)) &
+ ((1 << ZONES_SHIFT) - 1);
+
+ if (__builtin_constant_p(bit))
+ BUILD_BUG_ON((GFP_ZONE_BAD >> bit) & 1);
+ else {
+#ifdef CONFIG_DEBUG_VM
+ BUG_ON((GFP_ZONE_BAD >> bit) & 1);
#endif
-#ifdef CONFIG_ZONE_DMA32
- if (flags & __GFP_DMA32)
- return ZONE_DMA32;
-#endif
- if ((flags & (__GFP_HIGHMEM | __GFP_MOVABLE)) ==
- (__GFP_HIGHMEM | __GFP_MOVABLE))
- return ZONE_MOVABLE;
-#ifdef CONFIG_HIGHMEM
- if (flags & __GFP_HIGHMEM)
- return ZONE_HIGHMEM;
-#endif
- return ZONE_NORMAL;
+ }
+ return z;
}
/*
@@ -172,30 +266,19 @@
#endif
struct page *
-__alloc_pages_internal(gfp_t gfp_mask, unsigned int order,
+__alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
struct zonelist *zonelist, nodemask_t *nodemask);
static inline struct page *
__alloc_pages(gfp_t gfp_mask, unsigned int order,
struct zonelist *zonelist)
{
- return __alloc_pages_internal(gfp_mask, order, zonelist, NULL);
+ return __alloc_pages_nodemask(gfp_mask, order, zonelist, NULL);
}
-static inline struct page *
-__alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
- struct zonelist *zonelist, nodemask_t *nodemask)
-{
- return __alloc_pages_internal(gfp_mask, order, zonelist, nodemask);
-}
-
-
static inline struct page *alloc_pages_node(int nid, gfp_t gfp_mask,
unsigned int order)
{
- if (unlikely(order >= MAX_ORDER))
- return NULL;
-
/* Unknown node is current node */
if (nid < 0)
nid = numa_node_id();
@@ -203,15 +286,20 @@
return __alloc_pages(gfp_mask, order, node_zonelist(nid, gfp_mask));
}
+static inline struct page *alloc_pages_exact_node(int nid, gfp_t gfp_mask,
+ unsigned int order)
+{
+ VM_BUG_ON(nid < 0 || nid >= MAX_NUMNODES);
+
+ return __alloc_pages(gfp_mask, order, node_zonelist(nid, gfp_mask));
+}
+
#ifdef CONFIG_NUMA
extern struct page *alloc_pages_current(gfp_t gfp_mask, unsigned order);
static inline struct page *
alloc_pages(gfp_t gfp_mask, unsigned int order)
{
- if (unlikely(order >= MAX_ORDER))
- return NULL;
-
return alloc_pages_current(gfp_mask, order);
}
extern struct page *alloc_page_vma(gfp_t gfp_mask,
@@ -248,4 +336,16 @@
void drain_all_pages(void);
void drain_local_pages(void *dummy);
+extern bool oom_killer_disabled;
+
+static inline void oom_killer_disable(void)
+{
+ oom_killer_disabled = true;
+}
+
+static inline void oom_killer_enable(void)
+{
+ oom_killer_disabled = false;
+}
+
#endif /* __LINUX_GFP_H */
diff --git a/include/linux/highmem.h b/include/linux/highmem.h
index 1fcb712..211ff44 100644
--- a/include/linux/highmem.h
+++ b/include/linux/highmem.h
@@ -55,7 +55,9 @@
return page_address(page);
}
-#define kunmap(page) do { (void) (page); } while (0)
+static inline void kunmap(struct page *page)
+{
+}
static inline void *kmap_atomic(struct page *page, enum km_type idx)
{
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 03be7f2..a05a5ef 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -11,6 +11,8 @@
struct ctl_table;
+int PageHuge(struct page *page);
+
static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
{
return vma->vm_flags & VM_HUGETLB;
@@ -61,6 +63,11 @@
#else /* !CONFIG_HUGETLB_PAGE */
+static inline int PageHuge(struct page *page)
+{
+ return 0;
+}
+
static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
{
return 0;
diff --git a/include/linux/init.h b/include/linux/init.h
index b218980..8c2c998 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -29,7 +29,7 @@
* sign followed by value, e.g.:
*
* static int init_variable __initdata = 0;
- * static char linux_logo[] __initdata = { 0x32, 0x36, ... };
+ * static const char linux_logo[] __initconst = { 0x32, 0x36, ... };
*
* Don't forget to initialize data not at file scope, i.e. within a function,
* as gcc otherwise puts the data into the bss section and not into the init
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 28b1f30..5368fbd 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -15,18 +15,6 @@
extern struct files_struct init_files;
extern struct fs_struct init_fs;
-#define INIT_MM(name) \
-{ \
- .mm_rb = RB_ROOT, \
- .pgd = swapper_pg_dir, \
- .mm_users = ATOMIC_INIT(2), \
- .mm_count = ATOMIC_INIT(1), \
- .mmap_sem = __RWSEM_INITIALIZER(name.mmap_sem), \
- .page_table_lock = __SPIN_LOCK_UNLOCKED(name.page_table_lock), \
- .mmlist = LIST_HEAD_INIT(name.mmlist), \
- .cpu_vm_mask = CPU_MASK_ALL, \
-}
-
#define INIT_SIGNALS(sig) { \
.count = ATOMIC_INIT(1), \
.wait_chldexit = __WAIT_QUEUE_HEAD_INITIALIZER(sig.wait_chldexit),\
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index c41e812..2721f07 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -472,6 +472,20 @@
__tasklet_hi_schedule(t);
}
+extern void __tasklet_hi_schedule_first(struct tasklet_struct *t);
+
+/*
+ * This version avoids touching any other tasklets. Needed for kmemcheck
+ * in order not to take any page faults while enqueueing this tasklet;
+ * consider VERY carefully whether you really need this or
+ * tasklet_hi_schedule()...
+ */
+static inline void tasklet_hi_schedule_first(struct tasklet_struct *t)
+{
+ if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
+ __tasklet_hi_schedule_first(t);
+}
+
static inline void tasklet_disable_nosync(struct tasklet_struct *t)
{
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 1b2e174..c5a71c3 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -408,7 +408,7 @@
*
* Use tracing_on/tracing_off when you want to quickly turn on or off
* tracing. It simply enables or disables the recording of the trace events.
- * This also corresponds to the user space debugfs/tracing/tracing_on
+ * This also corresponds to the user space /sys/kernel/debug/tracing/tracing_on
* file, which gives a means for the kernel and userspace to interact.
* Place a tracing_off() in the kernel where you want tracing to end.
* From user space, examine the trace, and then echo 1 > tracing_on
diff --git a/include/linux/kmemcheck.h b/include/linux/kmemcheck.h
new file mode 100644
index 0000000..47b39b7
--- /dev/null
+++ b/include/linux/kmemcheck.h
@@ -0,0 +1,153 @@
+#ifndef LINUX_KMEMCHECK_H
+#define LINUX_KMEMCHECK_H
+
+#include <linux/mm_types.h>
+#include <linux/types.h>
+
+#ifdef CONFIG_KMEMCHECK
+extern int kmemcheck_enabled;
+
+/* The slab-related functions. */
+void kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node);
+void kmemcheck_free_shadow(struct page *page, int order);
+void kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object,
+ size_t size);
+void kmemcheck_slab_free(struct kmem_cache *s, void *object, size_t size);
+
+void kmemcheck_pagealloc_alloc(struct page *p, unsigned int order,
+ gfp_t gfpflags);
+
+void kmemcheck_show_pages(struct page *p, unsigned int n);
+void kmemcheck_hide_pages(struct page *p, unsigned int n);
+
+bool kmemcheck_page_is_tracked(struct page *p);
+
+void kmemcheck_mark_unallocated(void *address, unsigned int n);
+void kmemcheck_mark_uninitialized(void *address, unsigned int n);
+void kmemcheck_mark_initialized(void *address, unsigned int n);
+void kmemcheck_mark_freed(void *address, unsigned int n);
+
+void kmemcheck_mark_unallocated_pages(struct page *p, unsigned int n);
+void kmemcheck_mark_uninitialized_pages(struct page *p, unsigned int n);
+void kmemcheck_mark_initialized_pages(struct page *p, unsigned int n);
+
+int kmemcheck_show_addr(unsigned long address);
+int kmemcheck_hide_addr(unsigned long address);
+
+#else
+#define kmemcheck_enabled 0
+
+static inline void
+kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node)
+{
+}
+
+static inline void
+kmemcheck_free_shadow(struct page *page, int order)
+{
+}
+
+static inline void
+kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object,
+ size_t size)
+{
+}
+
+static inline void kmemcheck_slab_free(struct kmem_cache *s, void *object,
+ size_t size)
+{
+}
+
+static inline void kmemcheck_pagealloc_alloc(struct page *p,
+ unsigned int order, gfp_t gfpflags)
+{
+}
+
+static inline bool kmemcheck_page_is_tracked(struct page *p)
+{
+ return false;
+}
+
+static inline void kmemcheck_mark_unallocated(void *address, unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_uninitialized(void *address, unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_initialized(void *address, unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_freed(void *address, unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_unallocated_pages(struct page *p,
+ unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_uninitialized_pages(struct page *p,
+ unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_initialized_pages(struct page *p,
+ unsigned int n)
+{
+}
+
+#endif /* CONFIG_KMEMCHECK */
+
+/*
+ * Bitfield annotations
+ *
+ * How to use: If you have a struct using bitfields, for example
+ *
+ * struct a {
+ * int x:8, y:8;
+ * };
+ *
+ * then this should be rewritten as
+ *
+ * struct a {
+ * kmemcheck_bitfield_begin(flags);
+ * int x:8, y:8;
+ * kmemcheck_bitfield_end(flags);
+ * };
+ *
+ * Now the "flags_begin" and "flags_end" members may be used to refer to the
+ * beginning and end, respectively, of the bitfield (and things like
+ * &x.flags_begin is allowed). As soon as the struct is allocated, the bit-
+ * fields should be annotated:
+ *
+ * struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL);
+ * kmemcheck_annotate_bitfield(a, flags);
+ *
+ * Note: We provide the same definitions for both kmemcheck and non-
+ * kmemcheck kernels. This makes it harder to introduce accidental errors. It
+ * is also allowed to pass NULL pointers to kmemcheck_annotate_bitfield().
+ */
+#define kmemcheck_bitfield_begin(name) \
+ int name##_begin[0];
+
+#define kmemcheck_bitfield_end(name) \
+ int name##_end[0];
+
+#define kmemcheck_annotate_bitfield(ptr, name) \
+ do if (ptr) { \
+ int _n = (long) &((ptr)->name##_end) \
+ - (long) &((ptr)->name##_begin); \
+ BUILD_BUG_ON(_n < 0); \
+ \
+ kmemcheck_mark_initialized(&((ptr)->name##_begin), _n); \
+ } while (0)
+
+#define kmemcheck_annotate_variable(var) \
+ do { \
+ kmemcheck_mark_initialized(&(var), sizeof(var)); \
+ } while (0) \
+
+#endif /* LINUX_KMEMCHECK_H */
diff --git a/include/linux/linux_logo.h b/include/linux/linux_logo.h
index 08a9296..ca5bd91 100644
--- a/include/linux/linux_logo.h
+++ b/include/linux/linux_logo.h
@@ -32,6 +32,22 @@
const unsigned char *data;
};
+extern const struct linux_logo logo_linux_mono;
+extern const struct linux_logo logo_linux_vga16;
+extern const struct linux_logo logo_linux_clut224;
+extern const struct linux_logo logo_blackfin_vga16;
+extern const struct linux_logo logo_blackfin_clut224;
+extern const struct linux_logo logo_dec_clut224;
+extern const struct linux_logo logo_mac_clut224;
+extern const struct linux_logo logo_parisc_clut224;
+extern const struct linux_logo logo_sgi_clut224;
+extern const struct linux_logo logo_sun_clut224;
+extern const struct linux_logo logo_superh_mono;
+extern const struct linux_logo logo_superh_vga16;
+extern const struct linux_logo logo_superh_clut224;
+extern const struct linux_logo logo_m32r_clut224;
+extern const struct linux_logo logo_spe_clut224;
+
extern const struct linux_logo *fb_find_logo(int depth);
#ifdef CONFIG_FB_LOGO_EXTRA
extern void fb_append_extra_logo(const struct linux_logo *logo,
diff --git a/include/linux/lis3lv02d.h b/include/linux/lis3lv02d.h
new file mode 100644
index 0000000..ad651f4
--- /dev/null
+++ b/include/linux/lis3lv02d.h
@@ -0,0 +1,39 @@
+#ifndef __LIS3LV02D_H_
+#define __LIS3LV02D_H_
+
+struct lis3lv02d_platform_data {
+ /* please note: the 'click' feature is only supported for
+ * LIS[32]02DL variants of the chip and will be ignored for
+ * others */
+#define LIS3_CLICK_SINGLE_X (1 << 0)
+#define LIS3_CLICK_DOUBLE_X (1 << 1)
+#define LIS3_CLICK_SINGLE_Y (1 << 2)
+#define LIS3_CLICK_DOUBLE_Y (1 << 3)
+#define LIS3_CLICK_SINGLE_Z (1 << 4)
+#define LIS3_CLICK_DOUBLE_Z (1 << 5)
+ unsigned char click_flags;
+ unsigned char click_thresh_x;
+ unsigned char click_thresh_y;
+ unsigned char click_thresh_z;
+ unsigned char click_time_limit;
+ unsigned char click_latency;
+ unsigned char click_window;
+
+#define LIS3_IRQ1_DISABLE (0 << 0)
+#define LIS3_IRQ1_FF_WU_1 (1 << 0)
+#define LIS3_IRQ1_FF_WU_2 (2 << 0)
+#define LIS3_IRQ1_FF_WU_12 (3 << 0)
+#define LIS3_IRQ1_DATA_READY (4 << 0)
+#define LIS3_IRQ1_CLICK (7 << 0)
+#define LIS3_IRQ2_DISABLE (0 << 3)
+#define LIS3_IRQ2_FF_WU_1 (1 << 3)
+#define LIS3_IRQ2_FF_WU_2 (2 << 3)
+#define LIS3_IRQ2_FF_WU_12 (3 << 3)
+#define LIS3_IRQ2_DATA_READY (4 << 3)
+#define LIS3_IRQ2_CLICK (7 << 3)
+#define LIS3_IRQ_OPEN_DRAIN (1 << 6)
+#define LIS3_IRQ_ACTIVE_HIGH (1 << 7)
+ unsigned char irq_cfg;
+};
+
+#endif /* __LIS3LV02D_H_ */
diff --git a/include/linux/major.h b/include/linux/major.h
index 058ec15..6a8ca98 100644
--- a/include/linux/major.h
+++ b/include/linux/major.h
@@ -145,6 +145,7 @@
#define UNIX98_PTY_MAJOR_COUNT 8
#define UNIX98_PTY_SLAVE_MAJOR (UNIX98_PTY_MASTER_MAJOR+UNIX98_PTY_MAJOR_COUNT)
+#define DRBD_MAJOR 147
#define RTF_MAJOR 150
#define RAW_MAJOR 162
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 25b9ca9..45add35 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -94,6 +94,7 @@
extern void mem_cgroup_record_reclaim_priority(struct mem_cgroup *mem,
int priority);
int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg);
+int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg);
unsigned long mem_cgroup_zone_nr_pages(struct mem_cgroup *memcg,
struct zone *zone,
enum lru_list lru);
@@ -239,6 +240,12 @@
return 1;
}
+static inline int
+mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg)
+{
+ return 1;
+}
+
static inline unsigned long
mem_cgroup_zone_nr_pages(struct mem_cgroup *memcg, struct zone *zone,
enum lru_list lru)
diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h
index beb6ec9..0521177 100644
--- a/include/linux/miscdevice.h
+++ b/include/linux/miscdevice.h
@@ -41,6 +41,7 @@
struct list_head list;
struct device *parent;
struct device *this_device;
+ const char *devnode;
};
extern int misc_register(struct miscdevice * misc);
diff --git a/include/linux/mm.h b/include/linux/mm.h
index ad613ed..d88d6fc 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -7,7 +7,6 @@
#include <linux/gfp.h>
#include <linux/list.h>
-#include <linux/mmdebug.h>
#include <linux/mmzone.h>
#include <linux/rbtree.h>
#include <linux/prio_tree.h>
@@ -725,7 +724,7 @@
return 0;
}
#endif
-struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags);
+struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags);
int shmem_zero_setup(struct vm_area_struct *);
@@ -793,6 +792,8 @@
struct vm_area_struct *vma);
void unmap_mapping_range(struct address_space *mapping,
loff_t const holebegin, loff_t const holelen, int even_cows);
+int follow_pfn(struct vm_area_struct *vma, unsigned long address,
+ unsigned long *pfn);
int follow_phys(struct vm_area_struct *vma, unsigned long address,
unsigned int flags, unsigned long *prot, resource_size_t *phys);
int generic_access_phys(struct vm_area_struct *vma, unsigned long addr,
@@ -824,8 +825,11 @@
extern int make_pages_present(unsigned long addr, unsigned long end);
extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write);
-int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, unsigned long start,
- int len, int write, int force, struct page **pages, struct vm_area_struct **vmas);
+int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
+ unsigned long start, int len, int write, int force,
+ struct page **pages, struct vm_area_struct **vmas);
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+ struct page **pages);
extern int try_to_release_page(struct page * page, gfp_t gfp_mask);
extern void do_invalidatepage(struct page *page, unsigned long offset);
@@ -850,19 +854,6 @@
unsigned long end, unsigned long newflags);
/*
- * get_user_pages_fast provides equivalent functionality to get_user_pages,
- * operating on current and current->mm (force=0 and doesn't return any vmas).
- *
- * get_user_pages_fast may take mmap_sem and page tables, so no assumptions
- * can be made about locking. get_user_pages_fast is to be implemented in a
- * way that is advantageous (vs get_user_pages()) when the user memory area is
- * already faulted in and present in ptes. However if the pages have to be
- * faulted in, it may turn out to be slightly slower).
- */
-int get_user_pages_fast(unsigned long start, int nr_pages, int write,
- struct page **pages);
-
-/*
* A callback you can register to apply pressure to ageable caches.
*
* 'shrink' is passed a count 'nr_to_scan' and a 'gfpmask'. It should
@@ -1061,7 +1052,8 @@
extern void set_dma_reserve(unsigned long new_dma_reserve);
extern void memmap_init_zone(unsigned long, int, unsigned long,
unsigned long, enum memmap_context);
-extern void setup_per_zone_pages_min(void);
+extern void setup_per_zone_wmarks(void);
+extern void calculate_zone_inactive_ratio(struct zone *zone);
extern void mem_init(void);
extern void __init mmap_init(void);
extern void show_mem(void);
@@ -1178,8 +1170,6 @@
#define VM_MAX_READAHEAD 128 /* kbytes */
#define VM_MIN_READAHEAD 16 /* kbytes (includes current page) */
-int do_page_cache_readahead(struct address_space *mapping, struct file *filp,
- pgoff_t offset, unsigned long nr_to_read);
int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
pgoff_t offset, unsigned long nr_to_read);
@@ -1197,6 +1187,9 @@
unsigned long size);
unsigned long max_sane_readahead(unsigned long nr);
+unsigned long ra_submit(struct file_ra_state *ra,
+ struct address_space *mapping,
+ struct file *filp);
/* Do stack extension */
extern int expand_stack(struct vm_area_struct *vma, unsigned long address);
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 0e80e26..7acc843 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -98,6 +98,14 @@
#ifdef CONFIG_WANT_PAGE_DEBUG_FLAGS
unsigned long debug_flags; /* Use atomic bitops on this */
#endif
+
+#ifdef CONFIG_KMEMCHECK
+ /*
+ * kmemcheck wants to track the status of each byte in a page; this
+ * is a pointer to such a status block. NULL if not tracked.
+ */
+ void *shadow;
+#endif
};
/*
@@ -232,6 +240,8 @@
unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */
+ s8 oom_adj; /* OOM kill score adjustment (bit shift) */
+
cpumask_t cpu_vm_mask;
/* Architecture-specific MM context */
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index a47c879..8895985 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -50,9 +50,6 @@
static inline int get_pageblock_migratetype(struct page *page)
{
- if (unlikely(page_group_by_mobility_disabled))
- return MIGRATE_UNMOVABLE;
-
return get_pageblock_flags_group(page, PB_migrate, PB_migrate_end);
}
@@ -86,13 +83,8 @@
NR_ACTIVE_ANON, /* " " " " " */
NR_INACTIVE_FILE, /* " " " " " */
NR_ACTIVE_FILE, /* " " " " " */
-#ifdef CONFIG_UNEVICTABLE_LRU
NR_UNEVICTABLE, /* " " " " " */
NR_MLOCK, /* mlock()ed pages found and moved off LRU */
-#else
- NR_UNEVICTABLE = NR_ACTIVE_FILE, /* avoid compiler errors in dead code */
- NR_MLOCK = NR_ACTIVE_FILE,
-#endif
NR_ANON_PAGES, /* Mapped anonymous pages */
NR_FILE_MAPPED, /* pagecache pages mapped into pagetables.
only modified from process context */
@@ -135,11 +127,7 @@
LRU_ACTIVE_ANON = LRU_BASE + LRU_ACTIVE,
LRU_INACTIVE_FILE = LRU_BASE + LRU_FILE,
LRU_ACTIVE_FILE = LRU_BASE + LRU_FILE + LRU_ACTIVE,
-#ifdef CONFIG_UNEVICTABLE_LRU
LRU_UNEVICTABLE,
-#else
- LRU_UNEVICTABLE = LRU_ACTIVE_FILE, /* avoid compiler errors in dead code */
-#endif
NR_LRU_LISTS
};
@@ -159,13 +147,20 @@
static inline int is_unevictable_lru(enum lru_list l)
{
-#ifdef CONFIG_UNEVICTABLE_LRU
return (l == LRU_UNEVICTABLE);
-#else
- return 0;
-#endif
}
+enum zone_watermarks {
+ WMARK_MIN,
+ WMARK_LOW,
+ WMARK_HIGH,
+ NR_WMARK
+};
+
+#define min_wmark_pages(z) (z->watermark[WMARK_MIN])
+#define low_wmark_pages(z) (z->watermark[WMARK_LOW])
+#define high_wmark_pages(z) (z->watermark[WMARK_HIGH])
+
struct per_cpu_pages {
int count; /* number of pages in the list */
int high; /* high watermark, emptying needed */
@@ -278,7 +273,10 @@
struct zone {
/* Fields commonly accessed by the page allocator */
- unsigned long pages_min, pages_low, pages_high;
+
+ /* zone watermarks, access with *_wmark_pages(zone) macros */
+ unsigned long watermark[NR_WMARK];
+
/*
* We don't know if the memory that we're going to allocate will be freeable
* or/and it will be released eventually, so to avoid totally wasting several
@@ -323,9 +321,9 @@
/* Fields commonly accessed by the page reclaim scanner */
spinlock_t lru_lock;
- struct {
+ struct zone_lru {
struct list_head list;
- unsigned long nr_scan;
+ unsigned long nr_saved_scan; /* accumulated for batching */
} lru[NR_LRU_LISTS];
struct zone_reclaim_stat reclaim_stat;
diff --git a/include/linux/module.h b/include/linux/module.h
index a7bc6e7..505f20d 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -697,4 +697,21 @@
#define __MODULE_STRING(x) __stringify(x)
+
+#ifdef CONFIG_GENERIC_BUG
+int module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
+ struct module *);
+void module_bug_cleanup(struct module *);
+
+#else /* !CONFIG_GENERIC_BUG */
+
+static inline int module_bug_finalize(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs,
+ struct module *mod)
+{
+ return 0;
+}
+static inline void module_bug_cleanup(struct module *mod) {}
+#endif /* CONFIG_GENERIC_BUG */
+
#endif /* _LINUX_MODULE_H */
diff --git a/include/linux/nls.h b/include/linux/nls.h
index 52b1a76..d47beef 100644
--- a/include/linux/nls.h
+++ b/include/linux/nls.h
@@ -3,8 +3,23 @@
#include <linux/init.h>
-/* unicode character */
-typedef __u16 wchar_t;
+/* Unicode has changed over the years. Unicode code points no longer
+ * fit into 16 bits; as of Unicode 5 valid code points range from 0
+ * to 0x10ffff (17 planes, where each plane holds 65536 code points).
+ *
+ * The original decision to represent Unicode characters as 16-bit
+ * wchar_t values is now outdated. But plane 0 still includes the
+ * most commonly used characters, so we will retain it. The newer
+ * 32-bit unicode_t type can be used when it is necessary to
+ * represent the full Unicode character set.
+ */
+
+/* Plane-0 Unicode character */
+typedef u16 wchar_t;
+#define MAX_WCHAR_T 0xffff
+
+/* Arbitrary Unicode character */
+typedef u32 unicode_t;
struct nls_table {
const char *charset;
@@ -21,6 +36,13 @@
/* this value hold the maximum octet of charset */
#define NLS_MAX_CHARSET_SIZE 6 /* for UTF-8 */
+/* Byte order for UTF-16 strings */
+enum utf16_endian {
+ UTF16_HOST_ENDIAN,
+ UTF16_LITTLE_ENDIAN,
+ UTF16_BIG_ENDIAN
+};
+
/* nls.c */
extern int register_nls(struct nls_table *);
extern int unregister_nls(struct nls_table *);
@@ -28,10 +50,11 @@
extern void unload_nls(struct nls_table *);
extern struct nls_table *load_nls_default(void);
-extern int utf8_mbtowc(wchar_t *, const __u8 *, int);
-extern int utf8_mbstowcs(wchar_t *, const __u8 *, int);
-extern int utf8_wctomb(__u8 *, wchar_t, int);
-extern int utf8_wcstombs(__u8 *, const wchar_t *, int);
+extern int utf8_to_utf32(const u8 *s, int len, unicode_t *pu);
+extern int utf32_to_utf8(unicode_t u, u8 *s, int maxlen);
+extern int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs);
+extern int utf16s_to_utf8s(const wchar_t *pwcs, int len,
+ enum utf16_endian endian, u8 *s, int maxlen);
static inline unsigned char nls_tolower(struct nls_table *t, unsigned char c)
{
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index 848025c..829b94b 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -408,6 +408,19 @@
#define next_online_node(nid) next_node((nid), node_states[N_ONLINE])
extern int nr_node_ids;
+extern int nr_online_nodes;
+
+static inline void node_set_online(int nid)
+{
+ node_set_state(nid, N_ONLINE);
+ nr_online_nodes = num_node_state(N_ONLINE);
+}
+
+static inline void node_set_offline(int nid)
+{
+ node_clear_state(nid, N_ONLINE);
+ nr_online_nodes = num_node_state(N_ONLINE);
+}
#else
static inline int node_state(int node, enum node_states state)
@@ -434,7 +447,10 @@
#define first_online_node 0
#define next_online_node(nid) (MAX_NUMNODES)
#define nr_node_ids 1
+#define nr_online_nodes 1
+#define node_set_online(node) node_set_state((node), N_ONLINE)
+#define node_set_offline(node) node_clear_state((node), N_ONLINE)
#endif
#define node_online_map node_states[N_ONLINE]
@@ -454,9 +470,6 @@
#define node_online(node) node_state((node), N_ONLINE)
#define node_possible(node) node_state((node), N_POSSIBLE)
-#define node_set_online(node) node_set_state((node), N_ONLINE)
-#define node_set_offline(node) node_clear_state((node), N_ONLINE)
-
#define for_each_node(node) for_each_node_state(node, N_POSSIBLE)
#define for_each_online_node(node) for_each_node_state(node, N_ONLINE)
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 62214c7..d6792f8 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -95,9 +95,7 @@
PG_reclaim, /* To be reclaimed asap */
PG_buddy, /* Page is free, on buddy lists */
PG_swapbacked, /* Page is backed by RAM/swap */
-#ifdef CONFIG_UNEVICTABLE_LRU
PG_unevictable, /* Page is "unevictable" */
-#endif
#ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT
PG_mlocked, /* Page is vma mlocked */
#endif
@@ -248,14 +246,8 @@
SETPAGEFLAG_NOOP(SwapCache) CLEARPAGEFLAG_NOOP(SwapCache)
#endif
-#ifdef CONFIG_UNEVICTABLE_LRU
PAGEFLAG(Unevictable, unevictable) __CLEARPAGEFLAG(Unevictable, unevictable)
TESTCLEARFLAG(Unevictable, unevictable)
-#else
-PAGEFLAG_FALSE(Unevictable) TESTCLEARFLAG_FALSE(Unevictable)
- SETPAGEFLAG_NOOP(Unevictable) CLEARPAGEFLAG_NOOP(Unevictable)
- __CLEARPAGEFLAG_NOOP(Unevictable)
-#endif
#ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT
#define MLOCK_PAGES 1
@@ -382,12 +374,6 @@
#endif /* !PAGEFLAGS_EXTENDED */
-#ifdef CONFIG_UNEVICTABLE_LRU
-#define __PG_UNEVICTABLE (1 << PG_unevictable)
-#else
-#define __PG_UNEVICTABLE 0
-#endif
-
#ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT
#define __PG_MLOCKED (1 << PG_mlocked)
#else
@@ -403,7 +389,7 @@
1 << PG_private | 1 << PG_private_2 | \
1 << PG_buddy | 1 << PG_writeback | 1 << PG_reserved | \
1 << PG_slab | 1 << PG_swapcache | 1 << PG_active | \
- __PG_UNEVICTABLE | __PG_MLOCKED)
+ 1 << PG_unevictable | __PG_MLOCKED)
/*
* Flags checked when a page is prepped for return by the page allocator.
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index 34da523..aec3252 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -22,9 +22,7 @@
AS_EIO = __GFP_BITS_SHIFT + 0, /* IO error on async write */
AS_ENOSPC = __GFP_BITS_SHIFT + 1, /* ENOSPC on async write */
AS_MM_ALL_LOCKS = __GFP_BITS_SHIFT + 2, /* under mm_take_all_locks() */
-#ifdef CONFIG_UNEVICTABLE_LRU
AS_UNEVICTABLE = __GFP_BITS_SHIFT + 3, /* e.g., ramdisk, SHM_LOCK */
-#endif
};
static inline void mapping_set_error(struct address_space *mapping, int error)
@@ -37,8 +35,6 @@
}
}
-#ifdef CONFIG_UNEVICTABLE_LRU
-
static inline void mapping_set_unevictable(struct address_space *mapping)
{
set_bit(AS_UNEVICTABLE, &mapping->flags);
@@ -55,14 +51,6 @@
return test_bit(AS_UNEVICTABLE, &mapping->flags);
return !!mapping;
}
-#else
-static inline void mapping_set_unevictable(struct address_space *mapping) { }
-static inline void mapping_clear_unevictable(struct address_space *mapping) { }
-static inline int mapping_unevictable(struct address_space *mapping)
-{
- return 0;
-}
-#endif
static inline gfp_t mapping_gfp_mask(struct address_space * mapping)
{
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 72698d8..8e366bb 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -124,6 +124,14 @@
#define PCI_UNKNOWN ((pci_power_t __force) 5)
#define PCI_POWER_ERROR ((pci_power_t __force) -1)
+/* Remember to update this when the list above changes! */
+extern const char *pci_power_names[];
+
+static inline const char *pci_power_name(pci_power_t state)
+{
+ return pci_power_names[1 + (int) state];
+}
+
#define PCI_PM_D2_DELAY 200
#define PCI_PM_D3_WAIT 10
#define PCI_PM_BUS_WAIT 50
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index aa01d38..a3b0003 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -104,6 +104,7 @@
#define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300
#define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310
#define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320
+#define PCI_CLASS_SERIAL_USB_XHCI 0x0c0330
#define PCI_CLASS_SERIAL_FIBER 0x0c04
#define PCI_CLASS_SERIAL_SMBUS 0x0c05
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index b67bb5d..8dc5123 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -36,8 +36,8 @@
extern struct resource *platform_get_resource(struct platform_device *, unsigned int, unsigned int);
extern int platform_get_irq(struct platform_device *, unsigned int);
-extern struct resource *platform_get_resource_byname(struct platform_device *, unsigned int, char *);
-extern int platform_get_irq_byname(struct platform_device *, char *);
+extern struct resource *platform_get_resource_byname(struct platform_device *, unsigned int, const char *);
+extern int platform_get_irq_byname(struct platform_device *, const char *);
extern int platform_add_devices(struct platform_device **, int);
extern struct platform_device *platform_device_register_simple(const char *, int id,
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 8c24ef8..fa287f2 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -32,6 +32,7 @@
typedef struct poll_table_struct {
poll_queue_proc qproc;
+ unsigned long key;
} poll_table;
static inline void poll_wait(struct file * filp, wait_queue_head_t * wait_address, poll_table *p)
@@ -43,10 +44,12 @@
static inline void init_poll_funcptr(poll_table *pt, poll_queue_proc qproc)
{
pt->qproc = qproc;
+ pt->key = ~0UL; /* all events enabled */
}
struct poll_table_entry {
struct file *filp;
+ unsigned long key;
wait_queue_t wait;
wait_queue_head_t *wait_address;
};
diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
index 355f6e8..c5da749 100644
--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h
@@ -167,6 +167,8 @@
unsigned long first_index, unsigned int max_items);
unsigned long radix_tree_next_hole(struct radix_tree_root *root,
unsigned long index, unsigned long max_scan);
+unsigned long radix_tree_prev_hole(struct radix_tree_root *root,
+ unsigned long index, unsigned long max_scan);
int radix_tree_preload(gfp_t gfp_mask);
void radix_tree_init(void);
void *radix_tree_tag_set(struct radix_tree_root *root,
diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h
index 8670f15..29f8599 100644
--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -1,6 +1,7 @@
#ifndef _LINUX_RING_BUFFER_H
#define _LINUX_RING_BUFFER_H
+#include <linux/kmemcheck.h>
#include <linux/mm.h>
#include <linux/seq_file.h>
@@ -11,7 +12,10 @@
* Don't refer to this struct directly, use functions below.
*/
struct ring_buffer_event {
+ kmemcheck_bitfield_begin(bitfield);
u32 type_len:5, time_delta:27;
+ kmemcheck_bitfield_end(bitfield);
+
u32 array[];
};
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index b35bc0e..216d024 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -83,7 +83,8 @@
/*
* Called from mm/vmscan.c to handle paging out
*/
-int page_referenced(struct page *, int is_locked, struct mem_cgroup *cnt);
+int page_referenced(struct page *, int is_locked,
+ struct mem_cgroup *cnt, unsigned long *vm_flags);
int try_to_unmap(struct page *, int ignore_refs);
/*
@@ -105,18 +106,11 @@
*/
int page_mkclean(struct page *);
-#ifdef CONFIG_UNEVICTABLE_LRU
/*
* called in munlock()/munmap() path to check for other vmas holding
* the page mlocked.
*/
int try_to_munlock(struct page *);
-#else
-static inline int try_to_munlock(struct page *page)
-{
- return 0; /* a.k.a. SWAP_SUCCESS */
-}
-#endif
#else /* !CONFIG_MMU */
@@ -124,7 +118,7 @@
#define anon_vma_prepare(vma) (0)
#define anon_vma_link(vma) do {} while (0)
-#define page_referenced(page,l,cnt) TestClearPageReferenced(page)
+#define page_referenced(page, locked, cnt, flags) TestClearPageReferenced(page)
#define try_to_unmap(page, refs) SWAP_FAIL
static inline int page_mkclean(struct page *page)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index c900aa5..02042e7 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -674,7 +674,7 @@
struct task_group *tg;
#ifdef CONFIG_SYSFS
struct kobject kobj;
- struct work_struct work;
+ struct delayed_work work;
#endif
#endif
@@ -1178,7 +1178,6 @@
* a short time
*/
unsigned char fpu_counter;
- s8 oomkilladj; /* OOM kill score adjustment (bit shift). */
#ifdef CONFIG_BLK_DEV_IO_TRACE
unsigned int btrace_seq;
#endif
@@ -1318,7 +1317,8 @@
/* Thread group tracking */
u32 parent_exec_id;
u32 self_exec_id;
-/* Protection of (de-)allocation: mm, files, fs, tty, keyrings */
+/* Protection of (de-)allocation: mm, files, fs, tty, keyrings, mems_allowed,
+ * mempolicy */
spinlock_t alloc_lock;
#ifdef CONFIG_GENERIC_HARDIRQS
@@ -1386,8 +1386,7 @@
cputime_t acct_timexpd; /* stime + utime since last update */
#endif
#ifdef CONFIG_CPUSETS
- nodemask_t mems_allowed;
- int cpuset_mems_generation;
+ nodemask_t mems_allowed; /* Protected by alloc_lock */
int cpuset_mem_spread_rotor;
#endif
#ifdef CONFIG_CGROUPS
@@ -1410,7 +1409,7 @@
struct list_head perf_counter_list;
#endif
#ifdef CONFIG_NUMA
- struct mempolicy *mempolicy;
+ struct mempolicy *mempolicy; /* Protected by alloc_lock */
short il_next;
#endif
atomic_t fs_excl; /* holding fs exclusive resources */
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index fa51293..63ef24b 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -15,6 +15,7 @@
#define _LINUX_SKBUFF_H
#include <linux/kernel.h>
+#include <linux/kmemcheck.h>
#include <linux/compiler.h>
#include <linux/time.h>
#include <linux/cache.h>
@@ -343,6 +344,7 @@
};
};
__u32 priority;
+ kmemcheck_bitfield_begin(flags1);
__u8 local_df:1,
cloned:1,
ip_summed:2,
@@ -353,6 +355,7 @@
ipvs_property:1,
peeked:1,
nf_trace:1;
+ kmemcheck_bitfield_end(flags1);
__be16 protocol;
void (*destructor)(struct sk_buff *skb);
@@ -372,12 +375,16 @@
__u16 tc_verd; /* traffic control verdict */
#endif
#endif
+
+ kmemcheck_bitfield_begin(flags2);
#ifdef CONFIG_IPV6_NDISC_NODETYPE
__u8 ndisc_nodetype:2;
#endif
#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
__u8 do_not_encrypt:1;
#endif
+ kmemcheck_bitfield_end(flags2);
+
/* 0/13/14 bit hole */
#ifdef CONFIG_NET_DMA
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 219b8fb..2da8372 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -64,6 +64,13 @@
#define SLAB_NOLEAKTRACE 0x00800000UL /* Avoid kmemleak tracing */
+/* Don't track use of uninitialized memory */
+#ifdef CONFIG_KMEMCHECK
+# define SLAB_NOTRACK 0x01000000UL
+#else
+# define SLAB_NOTRACK 0x00000000UL
+#endif
+
/* The following flags affect the page allocator grouping pages by mobility */
#define SLAB_RECLAIM_ACCOUNT 0x00020000UL /* Objects are reclaimable */
#define SLAB_TEMPORARY SLAB_RECLAIM_ACCOUNT /* Objects are short-lived */
diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h
index 713f841..850d057 100644
--- a/include/linux/slab_def.h
+++ b/include/linux/slab_def.h
@@ -16,6 +16,87 @@
#include <linux/compiler.h>
#include <linux/kmemtrace.h>
+/*
+ * struct kmem_cache
+ *
+ * manages a cache.
+ */
+
+struct kmem_cache {
+/* 1) per-cpu data, touched during every alloc/free */
+ struct array_cache *array[NR_CPUS];
+/* 2) Cache tunables. Protected by cache_chain_mutex */
+ unsigned int batchcount;
+ unsigned int limit;
+ unsigned int shared;
+
+ unsigned int buffer_size;
+ u32 reciprocal_buffer_size;
+/* 3) touched by every alloc & free from the backend */
+
+ unsigned int flags; /* constant flags */
+ unsigned int num; /* # of objs per slab */
+
+/* 4) cache_grow/shrink */
+ /* order of pgs per slab (2^n) */
+ unsigned int gfporder;
+
+ /* force GFP flags, e.g. GFP_DMA */
+ gfp_t gfpflags;
+
+ size_t colour; /* cache colouring range */
+ unsigned int colour_off; /* colour offset */
+ struct kmem_cache *slabp_cache;
+ unsigned int slab_size;
+ unsigned int dflags; /* dynamic flags */
+
+ /* constructor func */
+ void (*ctor)(void *obj);
+
+/* 5) cache creation/removal */
+ const char *name;
+ struct list_head next;
+
+/* 6) statistics */
+#ifdef CONFIG_DEBUG_SLAB
+ unsigned long num_active;
+ unsigned long num_allocations;
+ unsigned long high_mark;
+ unsigned long grown;
+ unsigned long reaped;
+ unsigned long errors;
+ unsigned long max_freeable;
+ unsigned long node_allocs;
+ unsigned long node_frees;
+ unsigned long node_overflow;
+ atomic_t allochit;
+ atomic_t allocmiss;
+ atomic_t freehit;
+ atomic_t freemiss;
+
+ /*
+ * If debugging is enabled, then the allocator can add additional
+ * fields and/or padding to every object. buffer_size contains the total
+ * object size including these internal fields, the following two
+ * variables contain the offset to the user object and its size.
+ */
+ int obj_offset;
+ int obj_size;
+#endif /* CONFIG_DEBUG_SLAB */
+
+ /*
+ * We put nodelists[] at the end of kmem_cache, because we want to size
+ * this array to nr_node_ids slots instead of MAX_NUMNODES
+ * (see kmem_cache_init())
+ * We still use [MAX_NUMNODES] and not [1] or [0] because cache_cache
+ * is statically defined, so we reserve the max number of nodes.
+ */
+ struct kmem_list3 *nodelists[MAX_NUMNODES];
+ /*
+ * Do not add fields after nodelists[]
+ */
+};
+
/* Size description struct for general caches. */
struct cache_sizes {
size_t cs_size;
diff --git a/include/linux/smp.h b/include/linux/smp.h
index a69db82..9e3d8af 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -177,7 +177,6 @@
#define get_cpu() ({ preempt_disable(); smp_processor_id(); })
#define put_cpu() preempt_enable()
-#define put_cpu_no_resched() preempt_enable_no_resched()
/*
* Callback to arch code if there's nosmp or maxcpus=0 on the
diff --git a/include/linux/stacktrace.h b/include/linux/stacktrace.h
index 1a8cecc..51efbef 100644
--- a/include/linux/stacktrace.h
+++ b/include/linux/stacktrace.h
@@ -4,6 +4,8 @@
struct task_struct;
#ifdef CONFIG_STACKTRACE
+struct task_struct;
+
struct stack_trace {
unsigned int nr_entries, max_entries;
unsigned long *entries;
@@ -11,6 +13,7 @@
};
extern void save_stack_trace(struct stack_trace *trace);
+extern void save_stack_trace_bp(struct stack_trace *trace, unsigned long bp);
extern void save_stack_trace_tsk(struct task_struct *tsk,
struct stack_trace *trace);
diff --git a/include/linux/swap.h b/include/linux/swap.h
index d476aad..0cedf31 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -129,9 +129,10 @@
#define SWAP_CLUSTER_MAX 32
-#define SWAP_MAP_MAX 0x7fff
-#define SWAP_MAP_BAD 0x8000
-
+#define SWAP_MAP_MAX 0x7ffe
+#define SWAP_MAP_BAD 0x7fff
+#define SWAP_HAS_CACHE 0x8000 /* There is a swap cache of entry. */
+#define SWAP_COUNT_MASK (~SWAP_HAS_CACHE)
/*
* The in-memory structure used to track swap areas.
*/
@@ -235,7 +236,6 @@
}
#endif
-#ifdef CONFIG_UNEVICTABLE_LRU
extern int page_evictable(struct page *page, struct vm_area_struct *vma);
extern void scan_mapping_unevictable_pages(struct address_space *);
@@ -244,24 +244,6 @@
void __user *, size_t *, loff_t *);
extern int scan_unevictable_register_node(struct node *node);
extern void scan_unevictable_unregister_node(struct node *node);
-#else
-static inline int page_evictable(struct page *page,
- struct vm_area_struct *vma)
-{
- return 1;
-}
-
-static inline void scan_mapping_unevictable_pages(struct address_space *mapping)
-{
-}
-
-static inline int scan_unevictable_register_node(struct node *node)
-{
- return 0;
-}
-
-static inline void scan_unevictable_unregister_node(struct node *node) { }
-#endif
extern int kswapd_run(int nid);
@@ -274,7 +256,7 @@
#ifdef CONFIG_SWAP
/* linux/mm/page_io.c */
-extern int swap_readpage(struct file *, struct page *);
+extern int swap_readpage(struct page *);
extern int swap_writepage(struct page *page, struct writeback_control *wbc);
extern void end_swap_bio_read(struct bio *bio, int err);
@@ -300,9 +282,11 @@
extern void si_swapinfo(struct sysinfo *);
extern swp_entry_t get_swap_page(void);
extern swp_entry_t get_swap_page_of_type(int);
-extern int swap_duplicate(swp_entry_t);
+extern void swap_duplicate(swp_entry_t);
+extern int swapcache_prepare(swp_entry_t);
extern int valid_swaphandles(swp_entry_t, unsigned long *);
extern void swap_free(swp_entry_t);
+extern void swapcache_free(swp_entry_t, struct page *page);
extern int free_swap_and_cache(swp_entry_t);
extern int swap_type_of(dev_t, sector_t, struct block_device **);
extern unsigned int count_swap_pages(int, int);
@@ -370,12 +354,20 @@
}
#define free_swap_and_cache(swp) is_migration_entry(swp)
-#define swap_duplicate(swp) is_migration_entry(swp)
+#define swapcache_prepare(swp) is_migration_entry(swp)
+
+static inline void swap_duplicate(swp_entry_t swp)
+{
+}
static inline void swap_free(swp_entry_t swp)
{
}
+static inline void swapcache_free(swp_entry_t swp, struct page *page)
+{
+}
+
static inline struct page *swapin_readahead(swp_entry_t swp, gfp_t gfp_mask,
struct vm_area_struct *vma, unsigned long addr)
{
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 418d90f..fa4242c 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -434,6 +434,7 @@
asmlinkage long sys_fcntl64(unsigned int fd,
unsigned int cmd, unsigned long arg);
#endif
+asmlinkage long sys_pipe(int __user *fildes);
asmlinkage long sys_pipe2(int __user *fildes, int flags);
asmlinkage long sys_dup(unsigned int fildes);
asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd);
@@ -751,8 +752,6 @@
asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int,
struct timespec __user *, const sigset_t __user *,
size_t);
-asmlinkage long sys_pipe2(int __user *, int);
-asmlinkage long sys_pipe(int __user *);
int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
diff --git a/include/linux/timex.h b/include/linux/timex.h
index 9910e3b..e6967d1 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -280,6 +280,9 @@
int read_current_timer(unsigned long *timer_val);
+/* The clock frequency of the i8253/i8254 PIT */
+#define PIT_TICK_RATE 1193182ul
+
#endif /* KERNEL */
#endif /* LINUX_TIMEX_H */
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index 14df7e6..b9dc4ca 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -198,7 +198,7 @@
* * This is how the trace record is structured and will
* * be saved into the ring buffer. These are the fields
* * that will be exposed to user-space in
- * * /debug/tracing/events/<*>/format.
+ * * /sys/kernel/debug/tracing/events/<*>/format.
* *
* * The declared 'local variable' is called '__entry'
* *
@@ -258,7 +258,7 @@
* tracepoint callback (this is used by programmatic plugins and
* can also by used by generic instrumentation like SystemTap), and
* it is also used to expose a structured trace record in
- * /debug/tracing/events/.
+ * /sys/kernel/debug/tracing/events/.
*/
#define TRACE_EVENT(name, proto, args, struct, assign, print) \
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 3aa2cd1..84929e9 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -36,6 +36,7 @@
* - configs have one (often) or more interfaces;
* - interfaces have one (usually) or more settings;
* - each interface setting has zero or (usually) more endpoints.
+ * - a SuperSpeed endpoint has a companion descriptor
*
* And there might be other descriptors mixed in with those.
*
@@ -44,6 +45,19 @@
struct ep_device;
+/* For SS devices */
+/**
+ * struct usb_host_ss_ep_comp - Valid for SuperSpeed devices only
+ * @desc: endpoint companion descriptor, wMaxPacketSize in native byteorder
+ * @extra: descriptors following this endpoint companion descriptor
+ * @extralen: how many bytes of "extra" are valid
+ */
+struct usb_host_ss_ep_comp {
+ struct usb_ss_ep_comp_descriptor desc;
+ unsigned char *extra; /* Extra descriptors */
+ int extralen;
+};
+
/**
* struct usb_host_endpoint - host-side endpoint descriptor and queue
* @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder
@@ -51,6 +65,7 @@
* @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
* with one or more transfer descriptors (TDs) per urb
* @ep_dev: ep_device for sysfs info
+ * @ss_ep_comp: companion descriptor information for this endpoint
* @extra: descriptors following this endpoint in the configuration
* @extralen: how many bytes of "extra" are valid
* @enabled: URBs may be submitted to this endpoint
@@ -63,6 +78,7 @@
struct list_head urb_list;
void *hcpriv;
struct ep_device *ep_dev; /* For sysfs info */
+ struct usb_host_ss_ep_comp *ss_ep_comp; /* For SS devices */
unsigned char *extra; /* Extra descriptors */
int extralen;
@@ -336,7 +352,6 @@
#ifdef CONFIG_USB_DEVICEFS
struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */
#endif
- struct device *dev; /* device for this bus */
#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
struct mon_bus *mon_bus; /* non-null when associated */
@@ -363,6 +378,7 @@
* struct usb_device - kernel's representation of a USB device
* @devnum: device number; address on a USB bus
* @devpath: device ID string for use in messages (e.g., /port/...)
+ * @route: tree topology hex string for use with xHCI
* @state: device state: configured, not attached, etc.
* @speed: device speed: high/full/low (or error)
* @tt: Transaction Translator info; used with low/full speed dev, highspeed hub
@@ -420,6 +436,7 @@
* @skip_sys_resume: skip the next system resume
* @wusb_dev: if this is a Wireless USB device, link to the WUSB
* specific data for the device.
+ * @slot_id: Slot ID assigned by xHCI
*
* Notes:
* Usbcore drivers should not set usbdev->state directly. Instead use
@@ -428,6 +445,7 @@
struct usb_device {
int devnum;
char devpath [16];
+ u32 route;
enum usb_device_state state;
enum usb_device_speed speed;
@@ -503,6 +521,7 @@
unsigned skip_sys_resume:1;
#endif
struct wusb_dev *wusb_dev;
+ int slot_id;
};
#define to_usb_device(d) container_of(d, struct usb_device, dev)
@@ -869,6 +888,8 @@
* struct usb_device_driver - identifies USB device driver to usbcore
* @name: The driver name should be unique among USB drivers,
* and should normally be the same as the module name.
+ * @nodename: Callback to provide a naming hint for a possible
+ * device node to create.
* @probe: Called to see if the driver is willing to manage a particular
* device. If it is, probe returns zero and uses dev_set_drvdata()
* to associate driver-specific data with the device. If unwilling
@@ -912,6 +933,7 @@
*/
struct usb_class_driver {
char *name;
+ char *(*nodename)(struct device *dev);
const struct file_operations *fops;
int minor_base;
};
@@ -1041,7 +1063,9 @@
* @setup_dma: For control transfers with URB_NO_SETUP_DMA_MAP set, the
* device driver has provided this DMA address for the setup packet.
* The host controller driver should use this in preference to
- * setup_packet.
+ * setup_packet, but the HCD may chose to ignore the address if it must
+ * copy the setup packet into internal structures. Therefore, setup_packet
+ * must always point to a valid buffer.
* @start_frame: Returns the initial frame for isochronous transfers.
* @number_of_packets: Lists the number of ISO transfer buffers.
* @interval: Specifies the polling interval for interrupt or isochronous
@@ -1177,6 +1201,8 @@
unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/
void *transfer_buffer; /* (in) associated data buffer */
dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */
+ struct usb_sg_request *sg; /* (in) scatter gather buffer list */
+ int num_sgs; /* (in) number of entries in the sg list */
u32 transfer_buffer_length; /* (in) data buffer length */
u32 actual_length; /* (return) actual transfer length */
unsigned char *setup_packet; /* (in) setup packet (control only) */
@@ -1422,8 +1448,8 @@
int status;
size_t bytes;
- /*
- * members below are private: to usbcore,
+ /* private:
+ * members below are private to usbcore,
* and are not provided for driver access!
*/
spinlock_t lock;
@@ -1558,6 +1584,9 @@
#define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \
format "\n" , ## arg)
+/* debugfs stuff */
+extern struct dentry *usb_debug_root;
+
#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index 8cb025f..b5744bc 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -24,10 +24,75 @@
#define USB_SUBCLASS_AUDIOCONTROL 0x01
#define USB_SUBCLASS_AUDIOSTREAMING 0x02
#define USB_SUBCLASS_MIDISTREAMING 0x03
+#define USB_SUBCLASS_VENDOR_SPEC 0xff
+/* A.5 Audio Class-Specific AC interface Descriptor Subtypes*/
+#define HEADER 0x01
+#define INPUT_TERMINAL 0x02
+#define OUTPUT_TERMINAL 0x03
+#define MIXER_UNIT 0x04
+#define SELECTOR_UNIT 0x05
+#define FEATURE_UNIT 0x06
+#define PROCESSING_UNIT 0x07
+#define EXTENSION_UNIT 0x08
+
+#define AS_GENERAL 0x01
+#define FORMAT_TYPE 0x02
+#define FORMAT_SPECIFIC 0x03
+
+#define EP_GENERAL 0x01
+
+#define MS_GENERAL 0x01
+#define MIDI_IN_JACK 0x02
+#define MIDI_OUT_JACK 0x03
+
+/* endpoint attributes */
+#define EP_ATTR_MASK 0x0c
+#define EP_ATTR_ASYNC 0x04
+#define EP_ATTR_ADAPTIVE 0x08
+#define EP_ATTR_SYNC 0x0c
+
+/* cs endpoint attributes */
+#define EP_CS_ATTR_SAMPLE_RATE 0x01
+#define EP_CS_ATTR_PITCH_CONTROL 0x02
+#define EP_CS_ATTR_FILL_MAX 0x80
+
+/* Audio Class specific Request Codes */
+#define USB_AUDIO_SET_INTF 0x21
+#define USB_AUDIO_SET_ENDPOINT 0x22
+#define USB_AUDIO_GET_INTF 0xa1
+#define USB_AUDIO_GET_ENDPOINT 0xa2
+
+#define SET_ 0x00
+#define GET_ 0x80
+
+#define _CUR 0x1
+#define _MIN 0x2
+#define _MAX 0x3
+#define _RES 0x4
+#define _MEM 0x5
+
+#define SET_CUR (SET_ | _CUR)
+#define GET_CUR (GET_ | _CUR)
+#define SET_MIN (SET_ | _MIN)
+#define GET_MIN (GET_ | _MIN)
+#define SET_MAX (SET_ | _MAX)
+#define GET_MAX (GET_ | _MAX)
+#define SET_RES (SET_ | _RES)
+#define GET_RES (GET_ | _RES)
+#define SET_MEM (SET_ | _MEM)
+#define GET_MEM (GET_ | _MEM)
+
+#define GET_STAT 0xff
+
+#define USB_AC_TERMINAL_UNDEFINED 0x100
+#define USB_AC_TERMINAL_STREAMING 0x101
+#define USB_AC_TERMINAL_VENDOR_SPEC 0x1FF
+
+/* Terminal Control Selectors */
/* 4.3.2 Class-Specific AC Interface Descriptor */
struct usb_ac_header_descriptor {
- __u8 bLength; /* 8+n */
+ __u8 bLength; /* 8 + n */
__u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
__u8 bDescriptorSubtype; /* USB_MS_HEADER */
__le16 bcdADC; /* 0x0100 */
@@ -36,7 +101,7 @@
__u8 baInterfaceNr[]; /* [n] */
} __attribute__ ((packed));
-#define USB_DT_AC_HEADER_SIZE(n) (8+(n))
+#define USB_DT_AC_HEADER_SIZE(n) (8 + (n))
/* As above, but more useful for defining your own descriptors: */
#define DECLARE_USB_AC_HEADER_DESCRIPTOR(n) \
@@ -50,4 +115,200 @@
__u8 baInterfaceNr[n]; \
} __attribute__ ((packed))
+/* 4.3.2.1 Input Terminal Descriptor */
+struct usb_input_terminal_descriptor {
+ __u8 bLength; /* in bytes: 12 */
+ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */
+ __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */
+ __u8 bTerminalID; /* Constant uniquely terminal ID */
+ __le16 wTerminalType; /* USB Audio Terminal Types */
+ __u8 bAssocTerminal; /* ID of the Output Terminal associated */
+ __u8 bNrChannels; /* Number of logical output channels */
+ __le16 wChannelConfig;
+ __u8 iChannelNames;
+ __u8 iTerminal;
+} __attribute__ ((packed));
+
+#define USB_DT_AC_INPUT_TERMINAL_SIZE 12
+
+#define USB_AC_INPUT_TERMINAL_UNDEFINED 0x200
+#define USB_AC_INPUT_TERMINAL_MICROPHONE 0x201
+#define USB_AC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202
+#define USB_AC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203
+#define USB_AC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204
+#define USB_AC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205
+#define USB_AC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206
+
+/* 4.3.2.2 Output Terminal Descriptor */
+struct usb_output_terminal_descriptor {
+ __u8 bLength; /* in bytes: 9 */
+ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */
+ __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */
+ __u8 bTerminalID; /* Constant uniquely terminal ID */
+ __le16 wTerminalType; /* USB Audio Terminal Types */
+ __u8 bAssocTerminal; /* ID of the Input Terminal associated */
+ __u8 bSourceID; /* ID of the connected Unit or Terminal*/
+ __u8 iTerminal;
+} __attribute__ ((packed));
+
+#define USB_DT_AC_OUTPUT_TERMINAL_SIZE 9
+
+#define USB_AC_OUTPUT_TERMINAL_UNDEFINED 0x300
+#define USB_AC_OUTPUT_TERMINAL_SPEAKER 0x301
+#define USB_AC_OUTPUT_TERMINAL_HEADPHONES 0x302
+#define USB_AC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303
+#define USB_AC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304
+#define USB_AC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305
+#define USB_AC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306
+#define USB_AC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307
+
+/* Set bControlSize = 2 as default setting */
+#define USB_DT_AC_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2)
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(ch) \
+struct usb_ac_feature_unit_descriptor_##ch { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bUnitID; \
+ __u8 bSourceID; \
+ __u8 bControlSize; \
+ __le16 bmaControls[ch + 1]; \
+ __u8 iFeature; \
+} __attribute__ ((packed))
+
+/* 4.5.2 Class-Specific AS Interface Descriptor */
+struct usb_as_header_descriptor {
+ __u8 bLength; /* in bytes: 7 */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* AS_GENERAL */
+ __u8 bTerminalLink; /* Terminal ID of connected Terminal */
+ __u8 bDelay; /* Delay introduced by the data path */
+ __le16 wFormatTag; /* The Audio Data Format */
+} __attribute__ ((packed));
+
+#define USB_DT_AS_HEADER_SIZE 7
+
+#define USB_AS_AUDIO_FORMAT_TYPE_I_UNDEFINED 0x0
+#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM 0x1
+#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM8 0x2
+#define USB_AS_AUDIO_FORMAT_TYPE_I_IEEE_FLOAT 0x3
+#define USB_AS_AUDIO_FORMAT_TYPE_I_ALAW 0x4
+#define USB_AS_AUDIO_FORMAT_TYPE_I_MULAW 0x5
+
+struct usb_as_format_type_i_continuous_descriptor {
+ __u8 bLength; /* in bytes: 8 + (ns * 3) */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* FORMAT_TYPE */
+ __u8 bFormatType; /* FORMAT_TYPE_1 */
+ __u8 bNrChannels; /* physical channels in the stream */
+ __u8 bSubframeSize; /* */
+ __u8 bBitResolution;
+ __u8 bSamFreqType;
+ __u8 tLowerSamFreq[3];
+ __u8 tUpperSamFreq[3];
+} __attribute__ ((packed));
+
+#define USB_AS_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14
+
+struct usb_as_formate_type_i_discrete_descriptor {
+ __u8 bLength; /* in bytes: 8 + (ns * 3) */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* FORMAT_TYPE */
+ __u8 bFormatType; /* FORMAT_TYPE_1 */
+ __u8 bNrChannels; /* physical channels in the stream */
+ __u8 bSubframeSize; /* */
+ __u8 bBitResolution;
+ __u8 bSamFreqType;
+ __u8 tSamFreq[][3];
+} __attribute__ ((packed));
+
+#define DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(n) \
+struct usb_as_formate_type_i_discrete_descriptor_##n { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bFormatType; \
+ __u8 bNrChannels; \
+ __u8 bSubframeSize; \
+ __u8 bBitResolution; \
+ __u8 bSamFreqType; \
+ __u8 tSamFreq[n][3]; \
+} __attribute__ ((packed))
+
+#define USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3))
+
+#define USB_AS_FORMAT_TYPE_UNDEFINED 0x0
+#define USB_AS_FORMAT_TYPE_I 0x1
+#define USB_AS_FORMAT_TYPE_II 0x2
+#define USB_AS_FORMAT_TYPE_III 0x3
+
+#define USB_AS_ENDPOINT_ASYNC (1 << 2)
+#define USB_AS_ENDPOINT_ADAPTIVE (2 << 2)
+#define USB_AS_ENDPOINT_SYNC (3 << 2)
+
+struct usb_as_iso_endpoint_descriptor {
+ __u8 bLength; /* in bytes: 7 */
+ __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */
+ __u8 bDescriptorSubtype; /* EP_GENERAL */
+ __u8 bmAttributes;
+ __u8 bLockDelayUnits;
+ __le16 wLockDelay;
+};
+#define USB_AS_ISO_ENDPOINT_DESC_SIZE 7
+
+#define FU_CONTROL_UNDEFINED 0x00
+#define MUTE_CONTROL 0x01
+#define VOLUME_CONTROL 0x02
+#define BASS_CONTROL 0x03
+#define MID_CONTROL 0x04
+#define TREBLE_CONTROL 0x05
+#define GRAPHIC_EQUALIZER_CONTROL 0x06
+#define AUTOMATIC_GAIN_CONTROL 0x07
+#define DELAY_CONTROL 0x08
+#define BASS_BOOST_CONTROL 0x09
+#define LOUDNESS_CONTROL 0x0a
+
+#define FU_MUTE (1 << (MUTE_CONTROL - 1))
+#define FU_VOLUME (1 << (VOLUME_CONTROL - 1))
+#define FU_BASS (1 << (BASS_CONTROL - 1))
+#define FU_MID (1 << (MID_CONTROL - 1))
+#define FU_TREBLE (1 << (TREBLE_CONTROL - 1))
+#define FU_GRAPHIC_EQ (1 << (GRAPHIC_EQUALIZER_CONTROL - 1))
+#define FU_AUTO_GAIN (1 << (AUTOMATIC_GAIN_CONTROL - 1))
+#define FU_DELAY (1 << (DELAY_CONTROL - 1))
+#define FU_BASS_BOOST (1 << (BASS_BOOST_CONTROL - 1))
+#define FU_LOUDNESS (1 << (LOUDNESS_CONTROL - 1))
+
+struct usb_audio_control {
+ struct list_head list;
+ const char *name;
+ u8 type;
+ int data[5];
+ int (*set)(struct usb_audio_control *con, u8 cmd, int value);
+ int (*get)(struct usb_audio_control *con, u8 cmd);
+};
+
+static inline int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value)
+{
+ con->data[cmd] = value;
+
+ return 0;
+}
+
+static inline int generic_get_cmd(struct usb_audio_control *con, u8 cmd)
+{
+ return con->data[cmd];
+}
+
+struct usb_audio_control_selector {
+ struct list_head list;
+ struct list_head control;
+ u8 id;
+ const char *name;
+ u8 type;
+ struct usb_descriptor_header *desc;
+};
+
#endif /* __LINUX_USB_AUDIO_H */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index b145119..9322363 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -191,6 +191,8 @@
#define USB_DT_WIRE_ADAPTER 0x21
#define USB_DT_RPIPE 0x22
#define USB_DT_CS_RADIO_CONTROL 0x23
+/* From the USB 3.0 spec */
+#define USB_DT_SS_ENDPOINT_COMP 0x30
/* Conventional codes for class-specific descriptors. The convention is
* defined in the USB "Common Class" Spec (3.11). Individual class specs
@@ -535,6 +537,20 @@
/*-------------------------------------------------------------------------*/
+/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
+struct usb_ss_ep_comp_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bMaxBurst;
+ __u8 bmAttributes;
+ __u16 wBytesPerInterval;
+} __attribute__ ((packed));
+
+#define USB_DT_SS_EP_COMP_SIZE 6
+
+/*-------------------------------------------------------------------------*/
+
/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
struct usb_qualifier_descriptor {
__u8 bLength;
@@ -752,6 +768,7 @@
USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
USB_SPEED_HIGH, /* usb 2.0 */
USB_SPEED_VARIABLE, /* wireless (usb 2.5) */
+ USB_SPEED_SUPER, /* usb 3.0 */
};
enum usb_device_state {
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index acd7b0f..4f6bb3d 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -124,6 +124,7 @@
void (*suspend)(struct usb_function *);
void (*resume)(struct usb_function *);
+ /* private: */
/* internals */
struct list_head list;
};
@@ -219,6 +220,7 @@
struct usb_composite_dev *cdev;
+ /* private: */
/* internals */
struct list_head list;
struct list_head functions;
@@ -321,6 +323,7 @@
struct usb_configuration *config;
+ /* private: */
/* internals */
struct usb_device_descriptor desc;
struct list_head configs;
diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h
new file mode 100644
index 0000000..e115ae6
--- /dev/null
+++ b/include/linux/usb/langwell_otg.h
@@ -0,0 +1,177 @@
+/*
+ * Intel Langwell USB OTG transceiver driver
+ * Copyright (C) 2008, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __LANGWELL_OTG_H__
+#define __LANGWELL_OTG_H__
+
+/* notify transceiver driver about OTG events */
+extern void langwell_update_transceiver(void);
+/* HCD register bus driver */
+extern int langwell_register_host(struct pci_driver *host_driver);
+/* HCD unregister bus driver */
+extern void langwell_unregister_host(struct pci_driver *host_driver);
+/* DCD register bus driver */
+extern int langwell_register_peripheral(struct pci_driver *client_driver);
+/* DCD unregister bus driver */
+extern void langwell_unregister_peripheral(struct pci_driver *client_driver);
+/* No silent failure, output warning message */
+extern void langwell_otg_nsf_msg(unsigned long message);
+
+#define CI_USBCMD 0x30
+# define USBCMD_RST BIT(1)
+# define USBCMD_RS BIT(0)
+#define CI_USBSTS 0x34
+# define USBSTS_SLI BIT(8)
+# define USBSTS_URI BIT(6)
+# define USBSTS_PCI BIT(2)
+#define CI_PORTSC1 0x74
+# define PORTSC_PP BIT(12)
+# define PORTSC_LS (BIT(11) | BIT(10))
+# define PORTSC_SUSP BIT(7)
+# define PORTSC_CCS BIT(0)
+#define CI_HOSTPC1 0xb4
+# define HOSTPC1_PHCD BIT(22)
+#define CI_OTGSC 0xf4
+# define OTGSC_DPIE BIT(30)
+# define OTGSC_1MSE BIT(29)
+# define OTGSC_BSEIE BIT(28)
+# define OTGSC_BSVIE BIT(27)
+# define OTGSC_ASVIE BIT(26)
+# define OTGSC_AVVIE BIT(25)
+# define OTGSC_IDIE BIT(24)
+# define OTGSC_DPIS BIT(22)
+# define OTGSC_1MSS BIT(21)
+# define OTGSC_BSEIS BIT(20)
+# define OTGSC_BSVIS BIT(19)
+# define OTGSC_ASVIS BIT(18)
+# define OTGSC_AVVIS BIT(17)
+# define OTGSC_IDIS BIT(16)
+# define OTGSC_DPS BIT(14)
+# define OTGSC_1MST BIT(13)
+# define OTGSC_BSE BIT(12)
+# define OTGSC_BSV BIT(11)
+# define OTGSC_ASV BIT(10)
+# define OTGSC_AVV BIT(9)
+# define OTGSC_ID BIT(8)
+# define OTGSC_HABA BIT(7)
+# define OTGSC_HADP BIT(6)
+# define OTGSC_IDPU BIT(5)
+# define OTGSC_DP BIT(4)
+# define OTGSC_OT BIT(3)
+# define OTGSC_HAAR BIT(2)
+# define OTGSC_VC BIT(1)
+# define OTGSC_VD BIT(0)
+# define OTGSC_INTEN_MASK (0x7f << 24)
+# define OTGSC_INTSTS_MASK (0x7f << 16)
+#define CI_USBMODE 0xf8
+# define USBMODE_CM (BIT(1) | BIT(0))
+# define USBMODE_IDLE 0
+# define USBMODE_DEVICE 0x2
+# define USBMODE_HOST 0x3
+
+#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI)
+
+struct otg_hsm {
+ /* Input */
+ int a_bus_resume;
+ int a_bus_suspend;
+ int a_conn;
+ int a_sess_vld;
+ int a_srp_det;
+ int a_vbus_vld;
+ int b_bus_resume;
+ int b_bus_suspend;
+ int b_conn;
+ int b_se0_srp;
+ int b_sess_end;
+ int b_sess_vld;
+ int id;
+
+ /* Internal variables */
+ int a_set_b_hnp_en;
+ int b_srp_done;
+ int b_hnp_enable;
+
+ /* Timeout indicator for timers */
+ int a_wait_vrise_tmout;
+ int a_wait_bcon_tmout;
+ int a_aidl_bdis_tmout;
+ int b_ase0_brst_tmout;
+ int b_bus_suspend_tmout;
+ int b_srp_res_tmout;
+
+ /* Informative variables */
+ int a_bus_drop;
+ int a_bus_req;
+ int a_clr_err;
+ int a_suspend_req;
+ int b_bus_req;
+
+ /* Output */
+ int drv_vbus;
+ int loc_conn;
+ int loc_sof;
+
+ /* Others */
+ int b_bus_suspend_vld;
+};
+
+#define TA_WAIT_VRISE 100
+#define TA_WAIT_BCON 30000
+#define TA_AIDL_BDIS 15000
+#define TB_ASE0_BRST 5000
+#define TB_SE0_SRP 2
+#define TB_SRP_RES 100
+#define TB_BUS_SUSPEND 500
+
+struct langwell_otg_timer {
+ unsigned long expires; /* Number of count increase to timeout */
+ unsigned long count; /* Tick counter */
+ void (*function)(unsigned long); /* Timeout function */
+ unsigned long data; /* Data passed to function */
+ struct list_head list;
+};
+
+struct langwell_otg {
+ struct otg_transceiver otg;
+ struct otg_hsm hsm;
+ void __iomem *regs;
+ unsigned region;
+ struct pci_driver *host_ops;
+ struct pci_driver *client_ops;
+ struct pci_dev *pdev;
+ struct work_struct work;
+ struct workqueue_struct *qwork;
+ spinlock_t lock;
+ spinlock_t wq_lock;
+};
+
+static inline struct langwell_otg *otg_to_langwell(struct otg_transceiver *otg)
+{
+ return container_of(otg, struct langwell_otg, otg);
+}
+
+#ifdef DEBUG
+#define otg_dbg(fmt, args...) \
+ printk(KERN_DEBUG fmt , ## args)
+#else
+#define otg_dbg(fmt, args...) \
+ do { } while (0)
+#endif /* DEBUG */
+#endif /* __LANGWELL_OTG_H__ */
diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h
new file mode 100644
index 0000000..c949178
--- /dev/null
+++ b/include/linux/usb/langwell_udc.h
@@ -0,0 +1,310 @@
+/*
+ * Intel Langwell USB Device Controller driver
+ * Copyright (C) 2008-2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __LANGWELL_UDC_H
+#define __LANGWELL_UDC_H
+
+
+/* MACRO defines */
+#define CAP_REG_OFFSET 0x0
+#define OP_REG_OFFSET 0x28
+
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+
+#define DQH_ALIGNMENT 2048
+#define DTD_ALIGNMENT 64
+#define DMA_BOUNDARY 4096
+
+#define EP0_MAX_PKT_SIZE 64
+#define EP_DIR_IN 1
+#define EP_DIR_OUT 0
+
+#define FLUSH_TIMEOUT 1000
+#define RESET_TIMEOUT 1000
+#define SETUPSTAT_TIMEOUT 100
+#define PRIME_TIMEOUT 100
+
+
+/* device memory space registers */
+
+/* Capability Registers, BAR0 + CAP_REG_OFFSET */
+struct langwell_cap_regs {
+ /* offset: 0x0 */
+ u8 caplength; /* offset of Operational Register */
+ u8 _reserved3;
+ u16 hciversion; /* H: BCD encoding of host version */
+ u32 hcsparams; /* H: host port steering logic capability */
+ u32 hccparams; /* H: host multiple mode control capability */
+#define HCC_LEN BIT(17) /* Link power management (LPM) capability */
+ u8 _reserved4[0x20-0xc];
+ /* offset: 0x20 */
+ u16 dciversion; /* BCD encoding of device version */
+ u8 _reserved5[0x24-0x22];
+ u32 dccparams; /* overall device controller capability */
+#define HOSTCAP BIT(8) /* host capable */
+#define DEVCAP BIT(7) /* device capable */
+#define DEN(d) \
+ (((d)>>0)&0x1f) /* bits 4:0, device endpoint number */
+} __attribute__ ((packed));
+
+
+/* Operational Registers, BAR0 + OP_REG_OFFSET */
+struct langwell_op_regs {
+ /* offset: 0x28 */
+ u32 extsts;
+#define EXTS_TI1 BIT(4) /* general purpose timer interrupt 1 */
+#define EXTS_TI1TI0 BIT(3) /* general purpose timer interrupt 0 */
+#define EXTS_TI1UPI BIT(2) /* USB host periodic interrupt */
+#define EXTS_TI1UAI BIT(1) /* USB host asynchronous interrupt */
+#define EXTS_TI1NAKI BIT(0) /* NAK interrupt */
+ u32 extintr;
+#define EXTI_TIE1 BIT(4) /* general purpose timer interrupt enable 1 */
+#define EXTI_TIE0 BIT(3) /* general purpose timer interrupt enable 0 */
+#define EXTI_UPIE BIT(2) /* USB host periodic interrupt enable */
+#define EXTI_UAIE BIT(1) /* USB host asynchronous interrupt enable */
+#define EXTI_NAKE BIT(0) /* NAK interrupt enable */
+ /* offset: 0x30 */
+ u32 usbcmd;
+#define CMD_HIRD(u) \
+ (((u)>>24)&0xf) /* bits 27:24, host init resume duration */
+#define CMD_ITC(u) \
+ (((u)>>16)&0xff) /* bits 23:16, interrupt threshold control */
+#define CMD_PPE BIT(15) /* per-port change events enable */
+#define CMD_ATDTW BIT(14) /* add dTD tripwire */
+#define CMD_SUTW BIT(13) /* setup tripwire */
+#define CMD_ASPE BIT(11) /* asynchronous schedule park mode enable */
+#define CMD_FS2 BIT(10) /* frame list size */
+#define CMD_ASP1 BIT(9) /* asynchronous schedule park mode count */
+#define CMD_ASP0 BIT(8)
+#define CMD_LR BIT(7) /* light host/device controller reset */
+#define CMD_IAA BIT(6) /* interrupt on async advance doorbell */
+#define CMD_ASE BIT(5) /* asynchronous schedule enable */
+#define CMD_PSE BIT(4) /* periodic schedule enable */
+#define CMD_FS1 BIT(3)
+#define CMD_FS0 BIT(2)
+#define CMD_RST BIT(1) /* controller reset */
+#define CMD_RUNSTOP BIT(0) /* run/stop */
+ u32 usbsts;
+#define STS_PPCI(u) \
+ (((u)>>16)&0xffff) /* bits 31:16, port-n change detect */
+#define STS_AS BIT(15) /* asynchronous schedule status */
+#define STS_PS BIT(14) /* periodic schedule status */
+#define STS_RCL BIT(13) /* reclamation */
+#define STS_HCH BIT(12) /* HC halted */
+#define STS_ULPII BIT(10) /* ULPI interrupt */
+#define STS_SLI BIT(8) /* DC suspend */
+#define STS_SRI BIT(7) /* SOF received */
+#define STS_URI BIT(6) /* USB reset received */
+#define STS_AAI BIT(5) /* interrupt on async advance */
+#define STS_SEI BIT(4) /* system error */
+#define STS_FRI BIT(3) /* frame list rollover */
+#define STS_PCI BIT(2) /* port change detect */
+#define STS_UEI BIT(1) /* USB error interrupt */
+#define STS_UI BIT(0) /* USB interrupt */
+ u32 usbintr;
+/* bits 31:16, per-port interrupt enable */
+#define INTR_PPCE(u) (((u)>>16)&0xffff)
+#define INTR_ULPIE BIT(10) /* ULPI enable */
+#define INTR_SLE BIT(8) /* DC sleep/suspend enable */
+#define INTR_SRE BIT(7) /* SOF received enable */
+#define INTR_URE BIT(6) /* USB reset enable */
+#define INTR_AAE BIT(5) /* interrupt on async advance enable */
+#define INTR_SEE BIT(4) /* system error enable */
+#define INTR_FRE BIT(3) /* frame list rollover enable */
+#define INTR_PCE BIT(2) /* port change detect enable */
+#define INTR_UEE BIT(1) /* USB error interrupt enable */
+#define INTR_UE BIT(0) /* USB interrupt enable */
+ u32 frindex; /* frame index */
+#define FRINDEX_MASK (0x3fff << 0)
+ u32 ctrldssegment; /* not used */
+ u32 deviceaddr;
+#define USBADR_SHIFT 25
+#define USBADR(d) \
+ (((d)>>25)&0x7f) /* bits 31:25, device address */
+#define USBADR_MASK (0x7f << 25)
+#define USBADRA BIT(24) /* device address advance */
+ u32 endpointlistaddr;/* endpoint list top memory address */
+/* bits 31:11, endpoint list pointer */
+#define EPBASE(d) (((d)>>11)&0x1fffff)
+#define ENDPOINTLISTADDR_MASK (0x1fffff << 11)
+ u32 ttctrl; /* H: TT operatin, not used */
+ /* offset: 0x50 */
+ u32 burstsize; /* burst size of data movement */
+#define TXPBURST(b) \
+ (((b)>>8)&0xff) /* bits 15:8, TX burst length */
+#define RXPBURST(b) \
+ (((b)>>0)&0xff) /* bits 7:0, RX burst length */
+ u32 txfilltuning; /* TX tuning */
+ u32 txttfilltuning; /* H: TX TT tuning */
+ u32 ic_usb; /* control the IC_USB FS/LS transceiver */
+ /* offset: 0x60 */
+ u32 ulpi_viewport; /* indirect access to ULPI PHY */
+#define ULPIWU BIT(31) /* ULPI wakeup */
+#define ULPIRUN BIT(30) /* ULPI read/write run */
+#define ULPIRW BIT(29) /* ULPI read/write control */
+#define ULPISS BIT(27) /* ULPI sync state */
+#define ULPIPORT(u) \
+ (((u)>>24)&7) /* bits 26:24, ULPI port number */
+#define ULPIADDR(u) \
+ (((u)>>16)&0xff) /* bits 23:16, ULPI data address */
+#define ULPIDATRD(u) \
+ (((u)>>8)&0xff) /* bits 15:8, ULPI data read */
+#define ULPIDATWR(u) \
+ (((u)>>0)&0xff) /* bits 7:0, ULPI date write */
+ u8 _reserved6[0x70-0x64];
+ /* offset: 0x70 */
+ u32 configflag; /* H: not used */
+ u32 portsc1; /* port status */
+#define DA(p) \
+ (((p)>>25)&0x7f) /* bits 31:25, device address */
+#define PORTS_SSTS (BIT(24) | BIT(23)) /* suspend status */
+#define PORTS_WKOC BIT(22) /* wake on over-current enable */
+#define PORTS_WKDS BIT(21) /* wake on disconnect enable */
+#define PORTS_WKCN BIT(20) /* wake on connect enable */
+#define PORTS_PTC(p) (((p)>>16)&0xf) /* bits 19:16, port test control */
+#define PORTS_PIC (BIT(15) | BIT(14)) /* port indicator control */
+#define PORTS_PO BIT(13) /* port owner */
+#define PORTS_PP BIT(12) /* port power */
+#define PORTS_LS (BIT(11) | BIT(10)) /* line status */
+#define PORTS_SLP BIT(9) /* suspend using L1 */
+#define PORTS_PR BIT(8) /* port reset */
+#define PORTS_SUSP BIT(7) /* suspend */
+#define PORTS_FPR BIT(6) /* force port resume */
+#define PORTS_OCC BIT(5) /* over-current change */
+#define PORTS_OCA BIT(4) /* over-current active */
+#define PORTS_PEC BIT(3) /* port enable/disable change */
+#define PORTS_PE BIT(2) /* port enable/disable */
+#define PORTS_CSC BIT(1) /* connect status change */
+#define PORTS_CCS BIT(0) /* current connect status */
+ u8 _reserved7[0xb4-0x78];
+ /* offset: 0xb4 */
+ u32 devlc; /* control LPM and each USB port behavior */
+/* bits 31:29, parallel transceiver select */
+#define LPM_PTS(d) (((d)>>29)&7)
+#define LPM_STS BIT(28) /* serial transceiver select */
+#define LPM_PTW BIT(27) /* parallel transceiver width */
+#define LPM_PSPD(d) (((d)>>25)&3) /* bits 26:25, port speed */
+#define LPM_PSPD_MASK (BIT(26) | BIT(25))
+#define LPM_SPEED_FULL 0
+#define LPM_SPEED_LOW 1
+#define LPM_SPEED_HIGH 2
+#define LPM_SRT BIT(24) /* shorten reset time */
+#define LPM_PFSC BIT(23) /* port force full speed connect */
+#define LPM_PHCD BIT(22) /* PHY low power suspend clock disable */
+#define LPM_STL BIT(16) /* STALL reply to LPM token */
+#define LPM_BA(d) \
+ (((d)>>1)&0x7ff) /* bits 11:1, BmAttributes */
+#define LPM_NYT_ACK BIT(0) /* NYET/ACK reply to LPM token */
+ u8 _reserved8[0xf4-0xb8];
+ /* offset: 0xf4 */
+ u32 otgsc; /* On-The-Go status and control */
+#define OTGSC_DPIE BIT(30) /* data pulse interrupt enable */
+#define OTGSC_MSE BIT(29) /* 1 ms timer interrupt enable */
+#define OTGSC_BSEIE BIT(28) /* B session end interrupt enable */
+#define OTGSC_BSVIE BIT(27) /* B session valid interrupt enable */
+#define OTGSC_ASVIE BIT(26) /* A session valid interrupt enable */
+#define OTGSC_AVVIE BIT(25) /* A VBUS valid interrupt enable */
+#define OTGSC_IDIE BIT(24) /* USB ID interrupt enable */
+#define OTGSC_DPIS BIT(22) /* data pulse interrupt status */
+#define OTGSC_MSS BIT(21) /* 1 ms timer interrupt status */
+#define OTGSC_BSEIS BIT(20) /* B session end interrupt status */
+#define OTGSC_BSVIS BIT(19) /* B session valid interrupt status */
+#define OTGSC_ASVIS BIT(18) /* A session valid interrupt status */
+#define OTGSC_AVVIS BIT(17) /* A VBUS valid interrupt status */
+#define OTGSC_IDIS BIT(16) /* USB ID interrupt status */
+#define OTGSC_DPS BIT(14) /* data bus pulsing status */
+#define OTGSC_MST BIT(13) /* 1 ms timer toggle */
+#define OTGSC_BSE BIT(12) /* B session end */
+#define OTGSC_BSV BIT(11) /* B session valid */
+#define OTGSC_ASV BIT(10) /* A session valid */
+#define OTGSC_AVV BIT(9) /* A VBUS valid */
+#define OTGSC_USBID BIT(8) /* USB ID */
+#define OTGSC_HABA BIT(7) /* hw assist B-disconnect to A-connect */
+#define OTGSC_HADP BIT(6) /* hw assist data pulse */
+#define OTGSC_IDPU BIT(5) /* ID pullup */
+#define OTGSC_DP BIT(4) /* data pulsing */
+#define OTGSC_OT BIT(3) /* OTG termination */
+#define OTGSC_HAAR BIT(2) /* hw assist auto reset */
+#define OTGSC_VC BIT(1) /* VBUS charge */
+#define OTGSC_VD BIT(0) /* VBUS discharge */
+ u32 usbmode;
+#define MODE_VBPS BIT(5) /* R/W VBUS power select */
+#define MODE_SDIS BIT(4) /* R/W stream disable mode */
+#define MODE_SLOM BIT(3) /* R/W setup lockout mode */
+#define MODE_ENSE BIT(2) /* endian select */
+#define MODE_CM(u) (((u)>>0)&3) /* bits 1:0, controller mode */
+#define MODE_IDLE 0
+#define MODE_DEVICE 2
+#define MODE_HOST 3
+ u8 _reserved9[0x100-0xfc];
+ /* offset: 0x100 */
+ u32 endptnak;
+#define EPTN(e) \
+ (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK */
+#define EPRN(e) \
+ (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK */
+ u32 endptnaken;
+#define EPTNE(e) \
+ (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK enable */
+#define EPRNE(e) \
+ (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK enable */
+ u32 endptsetupstat;
+#define SETUPSTAT_MASK (0xffff << 0) /* bits 15:0 */
+#define EP0SETUPSTAT_MASK 1
+ u32 endptprime;
+/* bits 31:16, prime endpoint transmit buffer */
+#define PETB(e) (((e)>>16)&0xffff)
+/* bits 15:0, prime endpoint receive buffer */
+#define PERB(e) (((e)>>0)&0xffff)
+ /* offset: 0x110 */
+ u32 endptflush;
+/* bits 31:16, flush endpoint transmit buffer */
+#define FETB(e) (((e)>>16)&0xffff)
+/* bits 15:0, flush endpoint receive buffer */
+#define FERB(e) (((e)>>0)&0xffff)
+ u32 endptstat;
+/* bits 31:16, endpoint transmit buffer ready */
+#define ETBR(e) (((e)>>16)&0xffff)
+/* bits 15:0, endpoint receive buffer ready */
+#define ERBR(e) (((e)>>0)&0xffff)
+ u32 endptcomplete;
+/* bits 31:16, endpoint transmit complete event */
+#define ETCE(e) (((e)>>16)&0xffff)
+/* bits 15:0, endpoint receive complete event */
+#define ERCE(e) (((e)>>0)&0xffff)
+ /* offset: 0x11c */
+ u32 endptctrl[16];
+#define EPCTRL_TXE BIT(23) /* TX endpoint enable */
+#define EPCTRL_TXR BIT(22) /* TX data toggle reset */
+#define EPCTRL_TXI BIT(21) /* TX data toggle inhibit */
+#define EPCTRL_TXT(e) (((e)>>18)&3) /* bits 19:18, TX endpoint type */
+#define EPCTRL_TXT_SHIFT 18
+#define EPCTRL_TXD BIT(17) /* TX endpoint data source */
+#define EPCTRL_TXS BIT(16) /* TX endpoint STALL */
+#define EPCTRL_RXE BIT(7) /* RX endpoint enable */
+#define EPCTRL_RXR BIT(6) /* RX data toggle reset */
+#define EPCTRL_RXI BIT(5) /* RX data toggle inhibit */
+#define EPCTRL_RXT(e) (((e)>>2)&3) /* bits 3:2, RX endpoint type */
+#define EPCTRL_RXT_SHIFT 2 /* bits 19:18, TX endpoint type */
+#define EPCTRL_RXD BIT(1) /* RX endpoint data sink */
+#define EPCTRL_RXS BIT(0) /* RX endpoint STALL */
+} __attribute__ ((packed));
+
+#endif /* __LANGWELL_UDC_H */
+
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 1aaa826..2443c0e 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -80,10 +80,10 @@
/* for board-specific init logic */
extern int otg_set_transceiver(struct otg_transceiver *);
-#ifdef CONFIG_NOP_USB_XCEIV
+
+/* sometimes transceivers are accessed only through e.g. ULPI */
extern void usb_nop_xceiv_register(void);
extern void usb_nop_xceiv_unregister(void);
-#endif
/* for usb host and peripheral controller drivers */
diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h
new file mode 100644
index 0000000..e9f0384
--- /dev/null
+++ b/include/linux/usb/r8a66597.h
@@ -0,0 +1,44 @@
+/*
+ * R8A66597 driver platform data
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __LINUX_USB_R8A66597_H
+#define __LINUX_USB_R8A66597_H
+
+#define R8A66597_PLATDATA_XTAL_12MHZ 0x01
+#define R8A66597_PLATDATA_XTAL_24MHZ 0x02
+#define R8A66597_PLATDATA_XTAL_48MHZ 0x03
+
+struct r8a66597_platdata {
+ /* This ops can controll port power instead of DVSTCTR register. */
+ void (*port_power)(int port, int power);
+
+ /* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */
+ unsigned xtal:2;
+
+ /* set one = 3.3V, set zero = 1.5V */
+ unsigned vif:1;
+
+ /* set one = big endian, set zero = little endian */
+ unsigned endian:1;
+};
+#endif
+
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 8cdfed7..44801d2 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -15,6 +15,7 @@
#include <linux/kref.h>
#include <linux/mutex.h>
+#include <linux/sysrq.h>
#define SERIAL_TTY_MAJOR 188 /* Nice legal number now */
#define SERIAL_TTY_MINORS 254 /* loads of devices :) */
@@ -26,6 +27,13 @@
/* parity check flag */
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+enum port_dev_state {
+ PORT_UNREGISTERED,
+ PORT_REGISTERING,
+ PORT_REGISTERED,
+ PORT_UNREGISTERING,
+};
+
/**
* usb_serial_port: structure for the specific ports of a device.
* @serial: pointer back to the struct usb_serial owner of this port.
@@ -91,12 +99,17 @@
int write_urb_busy;
__u8 bulk_out_endpointAddress;
+ int tx_bytes_flight;
+ int urbs_in_flight;
+
wait_queue_head_t write_wait;
struct work_struct work;
char throttled;
char throttle_req;
char console;
+ unsigned long sysrq; /* sysrq timeout */
struct device dev;
+ enum port_dev_state dev_state;
};
#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
@@ -181,8 +194,10 @@
* This will be called when the struct usb_serial structure is fully set
* set up. Do any local initialization of the device, or any private
* memory structure allocation at this point in time.
- * @shutdown: pointer to the driver's shutdown function. This will be
- * called when the device is removed from the system.
+ * @disconnect: pointer to the driver's disconnect function. This will be
+ * called when the device is unplugged or unbound from the driver.
+ * @release: pointer to the driver's release function. This will be called
+ * when the usb_serial data structure is about to be destroyed.
* @usb_driver: pointer to the struct usb_driver that controls this
* device. This is necessary to allow dynamic ids to be added to
* the driver from sysfs.
@@ -207,12 +222,14 @@
struct device_driver driver;
struct usb_driver *usb_driver;
struct usb_dynids dynids;
+ int max_in_flight_urbs;
int (*probe)(struct usb_serial *serial, const struct usb_device_id *id);
int (*attach)(struct usb_serial *serial);
int (*calc_num_ports) (struct usb_serial *serial);
- void (*shutdown)(struct usb_serial *serial);
+ void (*disconnect)(struct usb_serial *serial);
+ void (*release)(struct usb_serial *serial);
int (*port_probe)(struct usb_serial_port *port);
int (*port_remove)(struct usb_serial_port *port);
@@ -294,9 +311,16 @@
extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
extern void usb_serial_generic_throttle(struct tty_struct *tty);
extern void usb_serial_generic_unthrottle(struct tty_struct *tty);
-extern void usb_serial_generic_shutdown(struct usb_serial *serial);
+extern void usb_serial_generic_disconnect(struct usb_serial *serial);
+extern void usb_serial_generic_release(struct usb_serial *serial);
extern int usb_serial_generic_register(int debug);
extern void usb_serial_generic_deregister(void);
+extern void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
+ gfp_t mem_flags);
+extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port,
+ unsigned int ch);
+extern int usb_serial_handle_break(struct usb_serial_port *port);
+
extern int usb_serial_bus_register(struct usb_serial_driver *device);
extern void usb_serial_bus_deregister(struct usb_serial_driver *device);
diff --git a/include/linux/utsname.h b/include/linux/utsname.h
index 1123267..3656b30 100644
--- a/include/linux/utsname.h
+++ b/include/linux/utsname.h
@@ -22,12 +22,12 @@
};
struct new_utsname {
- char sysname[65];
- char nodename[65];
- char release[65];
- char version[65];
- char machine[65];
- char domainname[65];
+ char sysname[__NEW_UTS_LEN + 1];
+ char nodename[__NEW_UTS_LEN + 1];
+ char release[__NEW_UTS_LEN + 1];
+ char version[__NEW_UTS_LEN + 1];
+ char machine[__NEW_UTS_LEN + 1];
+ char domainname[__NEW_UTS_LEN + 1];
};
#ifdef __KERNEL__
diff --git a/include/linux/vlynq.h b/include/linux/vlynq.h
new file mode 100644
index 0000000..8f6a958
--- /dev/null
+++ b/include/linux/vlynq.h
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __VLYNQ_H__
+#define __VLYNQ_H__
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#define VLYNQ_NUM_IRQS 32
+
+struct vlynq_mapping {
+ u32 size;
+ u32 offset;
+};
+
+enum vlynq_divisor {
+ vlynq_div_auto = 0,
+ vlynq_ldiv1,
+ vlynq_ldiv2,
+ vlynq_ldiv3,
+ vlynq_ldiv4,
+ vlynq_ldiv5,
+ vlynq_ldiv6,
+ vlynq_ldiv7,
+ vlynq_ldiv8,
+ vlynq_rdiv1,
+ vlynq_rdiv2,
+ vlynq_rdiv3,
+ vlynq_rdiv4,
+ vlynq_rdiv5,
+ vlynq_rdiv6,
+ vlynq_rdiv7,
+ vlynq_rdiv8,
+ vlynq_div_external
+};
+
+struct vlynq_device_id {
+ u32 id;
+ enum vlynq_divisor divisor;
+ unsigned long driver_data;
+};
+
+struct vlynq_regs;
+struct vlynq_device {
+ u32 id, dev_id;
+ int local_irq;
+ int remote_irq;
+ enum vlynq_divisor divisor;
+ u32 regs_start, regs_end;
+ u32 mem_start, mem_end;
+ u32 irq_start, irq_end;
+ int irq;
+ int enabled;
+ struct vlynq_regs *local;
+ struct vlynq_regs *remote;
+ struct device dev;
+};
+
+struct vlynq_driver {
+ char *name;
+ struct vlynq_device_id *id_table;
+ int (*probe)(struct vlynq_device *dev, struct vlynq_device_id *id);
+ void (*remove)(struct vlynq_device *dev);
+ struct device_driver driver;
+};
+
+struct plat_vlynq_ops {
+ int (*on)(struct vlynq_device *dev);
+ void (*off)(struct vlynq_device *dev);
+};
+
+static inline struct vlynq_driver *to_vlynq_driver(struct device_driver *drv)
+{
+ return container_of(drv, struct vlynq_driver, driver);
+}
+
+static inline struct vlynq_device *to_vlynq_device(struct device *device)
+{
+ return container_of(device, struct vlynq_device, dev);
+}
+
+extern struct bus_type vlynq_bus_type;
+
+extern int __vlynq_register_driver(struct vlynq_driver *driver,
+ struct module *owner);
+
+static inline int vlynq_register_driver(struct vlynq_driver *driver)
+{
+ return __vlynq_register_driver(driver, THIS_MODULE);
+}
+
+static inline void *vlynq_get_drvdata(struct vlynq_device *dev)
+{
+ return dev_get_drvdata(&dev->dev);
+}
+
+static inline void vlynq_set_drvdata(struct vlynq_device *dev, void *data)
+{
+ dev_set_drvdata(&dev->dev, data);
+}
+
+static inline u32 vlynq_mem_start(struct vlynq_device *dev)
+{
+ return dev->mem_start;
+}
+
+static inline u32 vlynq_mem_end(struct vlynq_device *dev)
+{
+ return dev->mem_end;
+}
+
+static inline u32 vlynq_mem_len(struct vlynq_device *dev)
+{
+ return dev->mem_end - dev->mem_start + 1;
+}
+
+static inline int vlynq_virq_to_irq(struct vlynq_device *dev, int virq)
+{
+ int irq = dev->irq_start + virq;
+ if ((irq < dev->irq_start) || (irq > dev->irq_end))
+ return -EINVAL;
+
+ return irq;
+}
+
+static inline int vlynq_irq_to_virq(struct vlynq_device *dev, int irq)
+{
+ if ((irq < dev->irq_start) || (irq > dev->irq_end))
+ return -EINVAL;
+
+ return irq - dev->irq_start;
+}
+
+extern void vlynq_unregister_driver(struct vlynq_driver *driver);
+extern int vlynq_enable_device(struct vlynq_device *dev);
+extern void vlynq_disable_device(struct vlynq_device *dev);
+extern int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset,
+ struct vlynq_mapping *mapping);
+extern int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset,
+ struct vlynq_mapping *mapping);
+extern int vlynq_set_local_irq(struct vlynq_device *dev, int virq);
+extern int vlynq_set_remote_irq(struct vlynq_device *dev, int virq);
+
+#endif /* __VLYNQ_H__ */
diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h
index 524cd1b..81a97cf 100644
--- a/include/linux/vmstat.h
+++ b/include/linux/vmstat.h
@@ -36,12 +36,14 @@
FOR_ALL_ZONES(PGSTEAL),
FOR_ALL_ZONES(PGSCAN_KSWAPD),
FOR_ALL_ZONES(PGSCAN_DIRECT),
+#ifdef CONFIG_NUMA
+ PGSCAN_ZONE_RECLAIM_FAILED,
+#endif
PGINODESTEAL, SLABS_SCANNED, KSWAPD_STEAL, KSWAPD_INODESTEAL,
PAGEOUTRUN, ALLOCSTALL, PGROTATED,
#ifdef CONFIG_HUGETLB_PAGE
HTLB_BUDDY_PGALLOC, HTLB_BUDDY_PGALLOC_FAIL,
#endif
-#ifdef CONFIG_UNEVICTABLE_LRU
UNEVICTABLE_PGCULLED, /* culled to noreclaim list */
UNEVICTABLE_PGSCANNED, /* scanned for reclaimability */
UNEVICTABLE_PGRESCUED, /* rescued from noreclaim list */
@@ -50,7 +52,6 @@
UNEVICTABLE_PGCLEARED, /* on COW, page truncate */
UNEVICTABLE_PGSTRANDED, /* unable to isolate on unlock */
UNEVICTABLE_MLOCKFREED,
-#endif
NR_VM_EVENT_ITEMS
};
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index 20a6957..47004f3 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -17,6 +17,7 @@
#define _INET_SOCK_H
+#include <linux/kmemcheck.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/jhash.h>
@@ -66,14 +67,16 @@
__be32 loc_addr;
__be32 rmt_addr;
__be16 rmt_port;
- u16 snd_wscale : 4,
- rcv_wscale : 4,
+ kmemcheck_bitfield_begin(flags);
+ u16 snd_wscale : 4,
+ rcv_wscale : 4,
tstamp_ok : 1,
sack_ok : 1,
wscale_ok : 1,
ecn_ok : 1,
acked : 1,
no_srccheck: 1;
+ kmemcheck_bitfield_end(flags);
struct ip_options *opt;
};
@@ -199,9 +202,12 @@
static inline struct request_sock *inet_reqsk_alloc(struct request_sock_ops *ops)
{
struct request_sock *req = reqsk_alloc(ops);
+ struct inet_request_sock *ireq = inet_rsk(req);
- if (req != NULL)
- inet_rsk(req)->opt = NULL;
+ if (req != NULL) {
+ kmemcheck_annotate_bitfield(ireq, flags);
+ ireq->opt = NULL;
+ }
return req;
}
diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h
index 4b8ece2..b63b80f 100644
--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h
@@ -16,6 +16,7 @@
#define _INET_TIMEWAIT_SOCK_
+#include <linux/kmemcheck.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/timer.h>
@@ -127,10 +128,12 @@
__be32 tw_rcv_saddr;
__be16 tw_dport;
__u16 tw_num;
+ kmemcheck_bitfield_begin(flags);
/* And these are ours. */
__u8 tw_ipv6only:1,
tw_transparent:1;
- /* 15 bits hole, try to pack */
+ /* 14 bits hole, try to pack */
+ kmemcheck_bitfield_end(flags);
__u16 tw_ipv6_offset;
unsigned long tw_ttd;
struct inet_bind_bucket *tw_tb;
diff --git a/include/net/sock.h b/include/net/sock.h
index 010e14a..95bd3fd 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -218,9 +218,11 @@
#define sk_hash __sk_common.skc_hash
#define sk_prot __sk_common.skc_prot
#define sk_net __sk_common.skc_net
+ kmemcheck_bitfield_begin(flags);
unsigned char sk_shutdown : 2,
sk_no_check : 2,
sk_userlocks : 4;
+ kmemcheck_bitfield_end(flags);
unsigned char sk_protocol;
unsigned short sk_type;
int sk_rcvbuf;
diff --git a/include/video/s1d13xxxfb.h b/include/video/s1d13xxxfb.h
index c3b2a2a..f0736cf 100644
--- a/include/video/s1d13xxxfb.h
+++ b/include/video/s1d13xxxfb.h
@@ -136,6 +136,15 @@
#define S1DREG_DELAYOFF 0xFFFE
#define S1DREG_DELAYON 0xFFFF
+#define BBLT_FIFO_EMPTY 0x00
+#define BBLT_FIFO_NOT_EMPTY 0x40
+#define BBLT_FIFO_NOT_FULL 0x30
+#define BBLT_FIFO_HALF_FULL 0x20
+#define BBLT_FIFO_FULL 0x10
+
+#define BBLT_SOLID_FILL 0x0c
+
+
/* Note: all above defines should go in separate header files
when implementing other S1D13xxx chip support. */
diff --git a/init/Kconfig b/init/Kconfig
index fed6dc3..c4b3c6d 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -616,13 +616,13 @@
bool
config SYSFS_DEPRECATED_V2
- bool "Create deprecated sysfs layout for older userspace tools"
+ bool "remove sysfs features which may confuse old userspace tools"
depends on SYSFS
- default y
+ default n
select SYSFS_DEPRECATED
help
This option switches the layout of sysfs to the deprecated
- version.
+ version. Do not use it on recent distributions.
The current sysfs layout features a unified device tree at
/sys/devices/, which is able to express a hierarchy between
diff --git a/init/do_mounts.c b/init/do_mounts.c
index dd7ee5f..093f659 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -231,7 +231,8 @@
void __init mount_block_root(char *name, int flags)
{
- char *fs_names = __getname();
+ char *fs_names = __getname_gfp(GFP_KERNEL
+ | __GFP_NOTRACK_FALSE_POSITIVE);
char *p;
#ifdef CONFIG_BLOCK
char b[BDEVNAME_SIZE];
diff --git a/init/main.c b/init/main.c
index f6204f7..0e7aede 100644
--- a/init/main.c
+++ b/init/main.c
@@ -65,6 +65,7 @@
#include <linux/idr.h>
#include <linux/ftrace.h>
#include <linux/async.h>
+#include <linux/kmemcheck.h>
#include <linux/kmemtrace.h>
#include <trace/boot.h>
@@ -546,6 +547,7 @@
page_cgroup_init_flatmem();
mem_init();
kmem_cache_init();
+ pgtable_cache_init();
vmalloc_init();
}
@@ -670,7 +672,6 @@
initrd_start = 0;
}
#endif
- cpuset_init_early();
page_cgroup_init();
enable_debug_pagealloc();
cpu_hotplug_init();
@@ -684,7 +685,6 @@
late_time_init();
calibrate_delay();
pidmap_init();
- pgtable_cache_init();
anon_vma_init();
#ifdef CONFIG_X86
if (efi_enabled)
@@ -867,6 +867,11 @@
static int __init kernel_init(void * unused)
{
lock_kernel();
+
+ /*
+ * init can allocate pages on any node
+ */
+ set_mems_allowed(node_possible_map);
/*
* init can run on any cpu.
*/
diff --git a/kernel/Makefile b/kernel/Makefile
index 90b53f6..9df4501 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -11,6 +11,7 @@
hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \
notifier.o ksysfs.o pm_qos_params.o sched_clock.o cred.o \
async.o
+obj-y += groups.o
ifdef CONFIG_FUNCTION_TRACER
# Do not trace debug files and internal ftrace files
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index d5a7e17..7e75a41 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -97,12 +97,6 @@
struct cpuset *parent; /* my parent */
- /*
- * Copy of global cpuset_mems_generation as of the most
- * recent time this cpuset changed its mems_allowed.
- */
- int mems_generation;
-
struct fmeter fmeter; /* memory_pressure filter */
/* partition number for rebuild_sched_domains() */
@@ -176,27 +170,6 @@
return test_bit(CS_SPREAD_SLAB, &cs->flags);
}
-/*
- * Increment this integer everytime any cpuset changes its
- * mems_allowed value. Users of cpusets can track this generation
- * number, and avoid having to lock and reload mems_allowed unless
- * the cpuset they're using changes generation.
- *
- * A single, global generation is needed because cpuset_attach_task() could
- * reattach a task to a different cpuset, which must not have its
- * generation numbers aliased with those of that tasks previous cpuset.
- *
- * Generations are needed for mems_allowed because one task cannot
- * modify another's memory placement. So we must enable every task,
- * on every visit to __alloc_pages(), to efficiently check whether
- * its current->cpuset->mems_allowed has changed, requiring an update
- * of its current->mems_allowed.
- *
- * Since writes to cpuset_mems_generation are guarded by the cgroup lock
- * there is no need to mark it atomic.
- */
-static int cpuset_mems_generation;
-
static struct cpuset top_cpuset = {
.flags = ((1 << CS_CPU_EXCLUSIVE) | (1 << CS_MEM_EXCLUSIVE)),
};
@@ -228,8 +201,9 @@
* If a task is only holding callback_mutex, then it has read-only
* access to cpusets.
*
- * The task_struct fields mems_allowed and mems_generation may only
- * be accessed in the context of that task, so require no locks.
+ * Now, the task_struct fields mems_allowed and mempolicy may be changed
+ * by other task, we use alloc_lock in the task_struct fields to protect
+ * them.
*
* The cpuset_common_file_read() handlers only hold callback_mutex across
* small pieces of code, such as when reading out possibly multi-word
@@ -331,75 +305,22 @@
BUG_ON(!nodes_intersects(*pmask, node_states[N_HIGH_MEMORY]));
}
-/**
- * cpuset_update_task_memory_state - update task memory placement
+/*
+ * update task's spread flag if cpuset's page/slab spread flag is set
*
- * If the current tasks cpusets mems_allowed changed behind our
- * backs, update current->mems_allowed, mems_generation and task NUMA
- * mempolicy to the new value.
- *
- * Task mempolicy is updated by rebinding it relative to the
- * current->cpuset if a task has its memory placement changed.
- * Do not call this routine if in_interrupt().
- *
- * Call without callback_mutex or task_lock() held. May be
- * called with or without cgroup_mutex held. Thanks in part to
- * 'the_top_cpuset_hack', the task's cpuset pointer will never
- * be NULL. This routine also might acquire callback_mutex during
- * call.
- *
- * Reading current->cpuset->mems_generation doesn't need task_lock
- * to guard the current->cpuset derefence, because it is guarded
- * from concurrent freeing of current->cpuset using RCU.
- *
- * The rcu_dereference() is technically probably not needed,
- * as I don't actually mind if I see a new cpuset pointer but
- * an old value of mems_generation. However this really only
- * matters on alpha systems using cpusets heavily. If I dropped
- * that rcu_dereference(), it would save them a memory barrier.
- * For all other arch's, rcu_dereference is a no-op anyway, and for
- * alpha systems not using cpusets, another planned optimization,
- * avoiding the rcu critical section for tasks in the root cpuset
- * which is statically allocated, so can't vanish, will make this
- * irrelevant. Better to use RCU as intended, than to engage in
- * some cute trick to save a memory barrier that is impossible to
- * test, for alpha systems using cpusets heavily, which might not
- * even exist.
- *
- * This routine is needed to update the per-task mems_allowed data,
- * within the tasks context, when it is trying to allocate memory
- * (in various mm/mempolicy.c routines) and notices that some other
- * task has been modifying its cpuset.
+ * Called with callback_mutex/cgroup_mutex held
*/
-
-void cpuset_update_task_memory_state(void)
+static void cpuset_update_task_spread_flag(struct cpuset *cs,
+ struct task_struct *tsk)
{
- int my_cpusets_mem_gen;
- struct task_struct *tsk = current;
- struct cpuset *cs;
-
- rcu_read_lock();
- my_cpusets_mem_gen = task_cs(tsk)->mems_generation;
- rcu_read_unlock();
-
- if (my_cpusets_mem_gen != tsk->cpuset_mems_generation) {
- mutex_lock(&callback_mutex);
- task_lock(tsk);
- cs = task_cs(tsk); /* Maybe changed when task not locked */
- guarantee_online_mems(cs, &tsk->mems_allowed);
- tsk->cpuset_mems_generation = cs->mems_generation;
- if (is_spread_page(cs))
- tsk->flags |= PF_SPREAD_PAGE;
- else
- tsk->flags &= ~PF_SPREAD_PAGE;
- if (is_spread_slab(cs))
- tsk->flags |= PF_SPREAD_SLAB;
- else
- tsk->flags &= ~PF_SPREAD_SLAB;
- task_unlock(tsk);
- mutex_unlock(&callback_mutex);
- mpol_rebind_task(tsk, &tsk->mems_allowed);
- }
+ if (is_spread_page(cs))
+ tsk->flags |= PF_SPREAD_PAGE;
+ else
+ tsk->flags &= ~PF_SPREAD_PAGE;
+ if (is_spread_slab(cs))
+ tsk->flags |= PF_SPREAD_SLAB;
+ else
+ tsk->flags &= ~PF_SPREAD_SLAB;
}
/*
@@ -1007,14 +928,6 @@
* other task, the task_struct mems_allowed that we are hacking
* is for our current task, which must allocate new pages for that
* migrating memory region.
- *
- * We call cpuset_update_task_memory_state() before hacking
- * our tasks mems_allowed, so that we are assured of being in
- * sync with our tasks cpuset, and in particular, callbacks to
- * cpuset_update_task_memory_state() from nested page allocations
- * won't see any mismatch of our cpuset and task mems_generation
- * values, so won't overwrite our hacked tasks mems_allowed
- * nodemask.
*/
static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from,
@@ -1022,22 +935,37 @@
{
struct task_struct *tsk = current;
- cpuset_update_task_memory_state();
-
- mutex_lock(&callback_mutex);
tsk->mems_allowed = *to;
- mutex_unlock(&callback_mutex);
do_migrate_pages(mm, from, to, MPOL_MF_MOVE_ALL);
- mutex_lock(&callback_mutex);
guarantee_online_mems(task_cs(tsk),&tsk->mems_allowed);
- mutex_unlock(&callback_mutex);
}
/*
- * Rebind task's vmas to cpuset's new mems_allowed, and migrate pages to new
- * nodes if memory_migrate flag is set. Called with cgroup_mutex held.
+ * cpuset_change_task_nodemask - change task's mems_allowed and mempolicy
+ * @tsk: the task to change
+ * @newmems: new nodes that the task will be set
+ *
+ * In order to avoid seeing no nodes if the old and new nodes are disjoint,
+ * we structure updates as setting all new allowed nodes, then clearing newly
+ * disallowed ones.
+ *
+ * Called with task's alloc_lock held
+ */
+static void cpuset_change_task_nodemask(struct task_struct *tsk,
+ nodemask_t *newmems)
+{
+ nodes_or(tsk->mems_allowed, tsk->mems_allowed, *newmems);
+ mpol_rebind_task(tsk, &tsk->mems_allowed);
+ mpol_rebind_task(tsk, newmems);
+ tsk->mems_allowed = *newmems;
+}
+
+/*
+ * Update task's mems_allowed and rebind its mempolicy and vmas' mempolicy
+ * of it to cpuset's new mems_allowed, and migrate pages to new nodes if
+ * memory_migrate flag is set. Called with cgroup_mutex held.
*/
static void cpuset_change_nodemask(struct task_struct *p,
struct cgroup_scanner *scan)
@@ -1046,12 +974,19 @@
struct cpuset *cs;
int migrate;
const nodemask_t *oldmem = scan->data;
+ nodemask_t newmems;
+
+ cs = cgroup_cs(scan->cg);
+ guarantee_online_mems(cs, &newmems);
+
+ task_lock(p);
+ cpuset_change_task_nodemask(p, &newmems);
+ task_unlock(p);
mm = get_task_mm(p);
if (!mm)
return;
- cs = cgroup_cs(scan->cg);
migrate = is_memory_migrate(cs);
mpol_rebind_mm(mm, &cs->mems_allowed);
@@ -1104,10 +1039,10 @@
/*
* Handle user request to change the 'mems' memory placement
* of a cpuset. Needs to validate the request, update the
- * cpusets mems_allowed and mems_generation, and for each
- * task in the cpuset, rebind any vma mempolicies and if
- * the cpuset is marked 'memory_migrate', migrate the tasks
- * pages to the new memory.
+ * cpusets mems_allowed, and for each task in the cpuset,
+ * update mems_allowed and rebind task's mempolicy and any vma
+ * mempolicies and if the cpuset is marked 'memory_migrate',
+ * migrate the tasks pages to the new memory.
*
* Call with cgroup_mutex held. May take callback_mutex during call.
* Will take tasklist_lock, scan tasklist for tasks in cpuset cs,
@@ -1160,7 +1095,6 @@
mutex_lock(&callback_mutex);
cs->mems_allowed = trialcs->mems_allowed;
- cs->mems_generation = cpuset_mems_generation++;
mutex_unlock(&callback_mutex);
update_tasks_nodemask(cs, &oldmem, &heap);
@@ -1193,6 +1127,46 @@
}
/*
+ * cpuset_change_flag - make a task's spread flags the same as its cpuset's
+ * @tsk: task to be updated
+ * @scan: struct cgroup_scanner containing the cgroup of the task
+ *
+ * Called by cgroup_scan_tasks() for each task in a cgroup.
+ *
+ * We don't need to re-check for the cgroup/cpuset membership, since we're
+ * holding cgroup_lock() at this point.
+ */
+static void cpuset_change_flag(struct task_struct *tsk,
+ struct cgroup_scanner *scan)
+{
+ cpuset_update_task_spread_flag(cgroup_cs(scan->cg), tsk);
+}
+
+/*
+ * update_tasks_flags - update the spread flags of tasks in the cpuset.
+ * @cs: the cpuset in which each task's spread flags needs to be changed
+ * @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks()
+ *
+ * Called with cgroup_mutex held
+ *
+ * The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
+ * calling callback functions for each.
+ *
+ * No return value. It's guaranteed that cgroup_scan_tasks() always returns 0
+ * if @heap != NULL.
+ */
+static void update_tasks_flags(struct cpuset *cs, struct ptr_heap *heap)
+{
+ struct cgroup_scanner scan;
+
+ scan.cg = cs->css.cgroup;
+ scan.test_task = NULL;
+ scan.process_task = cpuset_change_flag;
+ scan.heap = heap;
+ cgroup_scan_tasks(&scan);
+}
+
+/*
* update_flag - read a 0 or a 1 in a file and update associated flag
* bit: the bit to update (see cpuset_flagbits_t)
* cs: the cpuset to update
@@ -1205,8 +1179,10 @@
int turning_on)
{
struct cpuset *trialcs;
- int err;
int balance_flag_changed;
+ int spread_flag_changed;
+ struct ptr_heap heap;
+ int err;
trialcs = alloc_trial_cpuset(cs);
if (!trialcs)
@@ -1221,9 +1197,16 @@
if (err < 0)
goto out;
+ err = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
+ if (err < 0)
+ goto out;
+
balance_flag_changed = (is_sched_load_balance(cs) !=
is_sched_load_balance(trialcs));
+ spread_flag_changed = ((is_spread_slab(cs) != is_spread_slab(trialcs))
+ || (is_spread_page(cs) != is_spread_page(trialcs)));
+
mutex_lock(&callback_mutex);
cs->flags = trialcs->flags;
mutex_unlock(&callback_mutex);
@@ -1231,6 +1214,9 @@
if (!cpumask_empty(trialcs->cpus_allowed) && balance_flag_changed)
async_rebuild_sched_domains();
+ if (spread_flag_changed)
+ update_tasks_flags(cs, &heap);
+ heap_free(&heap);
out:
free_trial_cpuset(trialcs);
return err;
@@ -1372,15 +1358,20 @@
if (cs == &top_cpuset) {
cpumask_copy(cpus_attach, cpu_possible_mask);
+ to = node_possible_map;
} else {
- mutex_lock(&callback_mutex);
guarantee_online_cpus(cs, cpus_attach);
- mutex_unlock(&callback_mutex);
+ guarantee_online_mems(cs, &to);
}
err = set_cpus_allowed_ptr(tsk, cpus_attach);
if (err)
return;
+ task_lock(tsk);
+ cpuset_change_task_nodemask(tsk, &to);
+ task_unlock(tsk);
+ cpuset_update_task_spread_flag(cs, tsk);
+
from = oldcs->mems_allowed;
to = cs->mems_allowed;
mm = get_task_mm(tsk);
@@ -1442,11 +1433,9 @@
break;
case FILE_SPREAD_PAGE:
retval = update_flag(CS_SPREAD_PAGE, cs, val);
- cs->mems_generation = cpuset_mems_generation++;
break;
case FILE_SPREAD_SLAB:
retval = update_flag(CS_SPREAD_SLAB, cs, val);
- cs->mems_generation = cpuset_mems_generation++;
break;
default:
retval = -EINVAL;
@@ -1786,8 +1775,6 @@
struct cpuset *parent;
if (!cont->parent) {
- /* This is early initialization for the top cgroup */
- top_cpuset.mems_generation = cpuset_mems_generation++;
return &top_cpuset.css;
}
parent = cgroup_cs(cont->parent);
@@ -1799,7 +1786,6 @@
return ERR_PTR(-ENOMEM);
}
- cpuset_update_task_memory_state();
cs->flags = 0;
if (is_spread_page(parent))
set_bit(CS_SPREAD_PAGE, &cs->flags);
@@ -1808,7 +1794,6 @@
set_bit(CS_SCHED_LOAD_BALANCE, &cs->flags);
cpumask_clear(cs->cpus_allowed);
nodes_clear(cs->mems_allowed);
- cs->mems_generation = cpuset_mems_generation++;
fmeter_init(&cs->fmeter);
cs->relax_domain_level = -1;
@@ -1827,8 +1812,6 @@
{
struct cpuset *cs = cgroup_cs(cont);
- cpuset_update_task_memory_state();
-
if (is_sched_load_balance(cs))
update_flag(CS_SCHED_LOAD_BALANCE, cs, 0);
@@ -1849,21 +1832,6 @@
.early_init = 1,
};
-/*
- * cpuset_init_early - just enough so that the calls to
- * cpuset_update_task_memory_state() in early init code
- * are harmless.
- */
-
-int __init cpuset_init_early(void)
-{
- alloc_cpumask_var(&top_cpuset.cpus_allowed, GFP_NOWAIT);
-
- top_cpuset.mems_generation = cpuset_mems_generation++;
- return 0;
-}
-
-
/**
* cpuset_init - initialize cpusets at system boot
*
@@ -1874,11 +1842,13 @@
{
int err = 0;
+ if (!alloc_cpumask_var(&top_cpuset.cpus_allowed, GFP_KERNEL))
+ BUG();
+
cpumask_setall(top_cpuset.cpus_allowed);
nodes_setall(top_cpuset.mems_allowed);
fmeter_init(&top_cpuset.fmeter);
- top_cpuset.mems_generation = cpuset_mems_generation++;
set_bit(CS_SCHED_LOAD_BALANCE, &top_cpuset.flags);
top_cpuset.relax_domain_level = -1;
diff --git a/kernel/fork.c b/kernel/fork.c
index 4430eb1..be022c2 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -178,7 +178,7 @@
/* create a slab on which task_structs can be allocated */
task_struct_cachep =
kmem_cache_create("task_struct", sizeof(struct task_struct),
- ARCH_MIN_TASKALIGN, SLAB_PANIC, NULL);
+ ARCH_MIN_TASKALIGN, SLAB_PANIC | SLAB_NOTRACK, NULL);
#endif
/* do the arch specific task caches init */
@@ -1470,20 +1470,20 @@
{
sighand_cachep = kmem_cache_create("sighand_cache",
sizeof(struct sighand_struct), 0,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_DESTROY_BY_RCU,
- sighand_ctor);
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_DESTROY_BY_RCU|
+ SLAB_NOTRACK, sighand_ctor);
signal_cachep = kmem_cache_create("signal_cache",
sizeof(struct signal_struct), 0,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK, NULL);
files_cachep = kmem_cache_create("files_cache",
sizeof(struct files_struct), 0,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK, NULL);
fs_cachep = kmem_cache_create("fs_cache",
sizeof(struct fs_struct), 0,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK, NULL);
mm_cachep = kmem_cache_create("mm_struct",
sizeof(struct mm_struct), ARCH_MIN_MMSTRUCT_ALIGN,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK, NULL);
vm_area_cachep = KMEM_CACHE(vm_area_struct, SLAB_PANIC);
mmap_init();
}
diff --git a/kernel/groups.c b/kernel/groups.c
new file mode 100644
index 0000000..2b45b2e
--- /dev/null
+++ b/kernel/groups.c
@@ -0,0 +1,288 @@
+/*
+ * Supplementary group IDs
+ */
+#include <linux/cred.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/security.h>
+#include <linux/syscalls.h>
+#include <asm/uaccess.h>
+
+/* init to 2 - one for init_task, one to ensure it is never freed */
+struct group_info init_groups = { .usage = ATOMIC_INIT(2) };
+
+struct group_info *groups_alloc(int gidsetsize)
+{
+ struct group_info *group_info;
+ int nblocks;
+ int i;
+
+ nblocks = (gidsetsize + NGROUPS_PER_BLOCK - 1) / NGROUPS_PER_BLOCK;
+ /* Make sure we always allocate at least one indirect block pointer */
+ nblocks = nblocks ? : 1;
+ group_info = kmalloc(sizeof(*group_info) + nblocks*sizeof(gid_t *), GFP_USER);
+ if (!group_info)
+ return NULL;
+ group_info->ngroups = gidsetsize;
+ group_info->nblocks = nblocks;
+ atomic_set(&group_info->usage, 1);
+
+ if (gidsetsize <= NGROUPS_SMALL)
+ group_info->blocks[0] = group_info->small_block;
+ else {
+ for (i = 0; i < nblocks; i++) {
+ gid_t *b;
+ b = (void *)__get_free_page(GFP_USER);
+ if (!b)
+ goto out_undo_partial_alloc;
+ group_info->blocks[i] = b;
+ }
+ }
+ return group_info;
+
+out_undo_partial_alloc:
+ while (--i >= 0) {
+ free_page((unsigned long)group_info->blocks[i]);
+ }
+ kfree(group_info);
+ return NULL;
+}
+
+EXPORT_SYMBOL(groups_alloc);
+
+void groups_free(struct group_info *group_info)
+{
+ if (group_info->blocks[0] != group_info->small_block) {
+ int i;
+ for (i = 0; i < group_info->nblocks; i++)
+ free_page((unsigned long)group_info->blocks[i]);
+ }
+ kfree(group_info);
+}
+
+EXPORT_SYMBOL(groups_free);
+
+/* export the group_info to a user-space array */
+static int groups_to_user(gid_t __user *grouplist,
+ const struct group_info *group_info)
+{
+ int i;
+ unsigned int count = group_info->ngroups;
+
+ for (i = 0; i < group_info->nblocks; i++) {
+ unsigned int cp_count = min(NGROUPS_PER_BLOCK, count);
+ unsigned int len = cp_count * sizeof(*grouplist);
+
+ if (copy_to_user(grouplist, group_info->blocks[i], len))
+ return -EFAULT;
+
+ grouplist += NGROUPS_PER_BLOCK;
+ count -= cp_count;
+ }
+ return 0;
+}
+
+/* fill a group_info from a user-space array - it must be allocated already */
+static int groups_from_user(struct group_info *group_info,
+ gid_t __user *grouplist)
+{
+ int i;
+ unsigned int count = group_info->ngroups;
+
+ for (i = 0; i < group_info->nblocks; i++) {
+ unsigned int cp_count = min(NGROUPS_PER_BLOCK, count);
+ unsigned int len = cp_count * sizeof(*grouplist);
+
+ if (copy_from_user(group_info->blocks[i], grouplist, len))
+ return -EFAULT;
+
+ grouplist += NGROUPS_PER_BLOCK;
+ count -= cp_count;
+ }
+ return 0;
+}
+
+/* a simple Shell sort */
+static void groups_sort(struct group_info *group_info)
+{
+ int base, max, stride;
+ int gidsetsize = group_info->ngroups;
+
+ for (stride = 1; stride < gidsetsize; stride = 3 * stride + 1)
+ ; /* nothing */
+ stride /= 3;
+
+ while (stride) {
+ max = gidsetsize - stride;
+ for (base = 0; base < max; base++) {
+ int left = base;
+ int right = left + stride;
+ gid_t tmp = GROUP_AT(group_info, right);
+
+ while (left >= 0 && GROUP_AT(group_info, left) > tmp) {
+ GROUP_AT(group_info, right) =
+ GROUP_AT(group_info, left);
+ right = left;
+ left -= stride;
+ }
+ GROUP_AT(group_info, right) = tmp;
+ }
+ stride /= 3;
+ }
+}
+
+/* a simple bsearch */
+int groups_search(const struct group_info *group_info, gid_t grp)
+{
+ unsigned int left, right;
+
+ if (!group_info)
+ return 0;
+
+ left = 0;
+ right = group_info->ngroups;
+ while (left < right) {
+ unsigned int mid = (left+right)/2;
+ int cmp = grp - GROUP_AT(group_info, mid);
+ if (cmp > 0)
+ left = mid + 1;
+ else if (cmp < 0)
+ right = mid;
+ else
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * set_groups - Change a group subscription in a set of credentials
+ * @new: The newly prepared set of credentials to alter
+ * @group_info: The group list to install
+ *
+ * Validate a group subscription and, if valid, insert it into a set
+ * of credentials.
+ */
+int set_groups(struct cred *new, struct group_info *group_info)
+{
+ int retval;
+
+ retval = security_task_setgroups(group_info);
+ if (retval)
+ return retval;
+
+ put_group_info(new->group_info);
+ groups_sort(group_info);
+ get_group_info(group_info);
+ new->group_info = group_info;
+ return 0;
+}
+
+EXPORT_SYMBOL(set_groups);
+
+/**
+ * set_current_groups - Change current's group subscription
+ * @group_info: The group list to impose
+ *
+ * Validate a group subscription and, if valid, impose it upon current's task
+ * security record.
+ */
+int set_current_groups(struct group_info *group_info)
+{
+ struct cred *new;
+ int ret;
+
+ new = prepare_creds();
+ if (!new)
+ return -ENOMEM;
+
+ ret = set_groups(new, group_info);
+ if (ret < 0) {
+ abort_creds(new);
+ return ret;
+ }
+
+ return commit_creds(new);
+}
+
+EXPORT_SYMBOL(set_current_groups);
+
+SYSCALL_DEFINE2(getgroups, int, gidsetsize, gid_t __user *, grouplist)
+{
+ const struct cred *cred = current_cred();
+ int i;
+
+ if (gidsetsize < 0)
+ return -EINVAL;
+
+ /* no need to grab task_lock here; it cannot change */
+ i = cred->group_info->ngroups;
+ if (gidsetsize) {
+ if (i > gidsetsize) {
+ i = -EINVAL;
+ goto out;
+ }
+ if (groups_to_user(grouplist, cred->group_info)) {
+ i = -EFAULT;
+ goto out;
+ }
+ }
+out:
+ return i;
+}
+
+/*
+ * SMP: Our groups are copy-on-write. We can set them safely
+ * without another task interfering.
+ */
+
+SYSCALL_DEFINE2(setgroups, int, gidsetsize, gid_t __user *, grouplist)
+{
+ struct group_info *group_info;
+ int retval;
+
+ if (!capable(CAP_SETGID))
+ return -EPERM;
+ if ((unsigned)gidsetsize > NGROUPS_MAX)
+ return -EINVAL;
+
+ group_info = groups_alloc(gidsetsize);
+ if (!group_info)
+ return -ENOMEM;
+ retval = groups_from_user(group_info, grouplist);
+ if (retval) {
+ put_group_info(group_info);
+ return retval;
+ }
+
+ retval = set_current_groups(group_info);
+ put_group_info(group_info);
+
+ return retval;
+}
+
+/*
+ * Check whether we're fsgid/egid or in the supplemental group..
+ */
+int in_group_p(gid_t grp)
+{
+ const struct cred *cred = current_cred();
+ int retval = 1;
+
+ if (grp != cred->fsgid)
+ retval = groups_search(cred->group_info, grp);
+ return retval;
+}
+
+EXPORT_SYMBOL(in_group_p);
+
+int in_egroup_p(gid_t grp)
+{
+ const struct cred *cred = current_cred();
+ int retval = 1;
+
+ if (grp != cred->egid)
+ retval = groups_search(cred->group_info, grp);
+ return retval;
+}
+
+EXPORT_SYMBOL(in_egroup_p);
diff --git a/kernel/kfifo.c b/kernel/kfifo.c
index bc41ad0..26539e3 100644
--- a/kernel/kfifo.c
+++ b/kernel/kfifo.c
@@ -72,9 +72,9 @@
/*
* round up to the next power of 2, since our 'let the indices
- * wrap' tachnique works only in this case.
+ * wrap' technique works only in this case.
*/
- if (size & (size - 1)) {
+ if (!is_power_of_2(size)) {
BUG_ON(size > 0x80000000);
size = roundup_pow_of_two(size);
}
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 41c88fe..7fa4413 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -9,6 +9,7 @@
#include <linux/kthread.h>
#include <linux/completion.h>
#include <linux/err.h>
+#include <linux/cpuset.h>
#include <linux/unistd.h>
#include <linux/file.h>
#include <linux/module.h>
@@ -236,6 +237,7 @@
ignore_signals(tsk);
set_user_nice(tsk, KTHREAD_NICE_LEVEL);
set_cpus_allowed_ptr(tsk, cpu_all_mask);
+ set_mems_allowed(node_possible_map);
current->flags |= PF_NOFREEZE | PF_FREEZER_NOSIG;
diff --git a/kernel/power/process.c b/kernel/power/process.c
index ca63401..da2072d 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -117,9 +117,12 @@
if (error)
goto Exit;
printk("done.");
+
+ oom_killer_disable();
Exit:
BUG_ON(in_atomic());
printk("\n");
+
return error;
}
@@ -145,6 +148,8 @@
void thaw_processes(void)
{
+ oom_killer_enable();
+
printk("Restarting tasks ... ");
thaw_tasks(true);
thaw_tasks(false);
diff --git a/kernel/profile.c b/kernel/profile.c
index 28cf26a..69911b5 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -365,7 +365,7 @@
node = cpu_to_node(cpu);
per_cpu(cpu_profile_flip, cpu) = 0;
if (!per_cpu(cpu_profile_hits, cpu)[1]) {
- page = alloc_pages_node(node,
+ page = alloc_pages_exact_node(node,
GFP_KERNEL | __GFP_ZERO,
0);
if (!page)
@@ -373,7 +373,7 @@
per_cpu(cpu_profile_hits, cpu)[1] = page_address(page);
}
if (!per_cpu(cpu_profile_hits, cpu)[0]) {
- page = alloc_pages_node(node,
+ page = alloc_pages_exact_node(node,
GFP_KERNEL | __GFP_ZERO,
0);
if (!page)
@@ -564,14 +564,14 @@
int node = cpu_to_node(cpu);
struct page *page;
- page = alloc_pages_node(node,
+ page = alloc_pages_exact_node(node,
GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
0);
if (!page)
goto out_cleanup;
per_cpu(cpu_profile_hits, cpu)[1]
= (struct profile_hit *)page_address(page);
- page = alloc_pages_node(node,
+ page = alloc_pages_exact_node(node,
GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
0);
if (!page)
diff --git a/kernel/signal.c b/kernel/signal.c
index 809a228..d81f495 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -832,6 +832,7 @@
{
struct sigpending *pending;
struct sigqueue *q;
+ int override_rlimit;
trace_sched_signal_send(sig, t);
@@ -863,9 +864,13 @@
make sure at least one signal gets delivered and don't
pass on the info struct. */
- q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
- (is_si_special(info) ||
- info->si_code >= 0)));
+ if (sig < SIGRTMIN)
+ override_rlimit = (is_si_special(info) || info->si_code >= 0);
+ else
+ override_rlimit = 0;
+
+ q = __sigqueue_alloc(t, GFP_ATOMIC | __GFP_NOTRACK_FALSE_POSITIVE,
+ override_rlimit);
if (q) {
list_add_tail(&q->list, &pending->list);
switch ((unsigned long) info) {
diff --git a/kernel/slow-work.c b/kernel/slow-work.c
index 521ed20..09d7519 100644
--- a/kernel/slow-work.c
+++ b/kernel/slow-work.c
@@ -319,6 +319,15 @@
EXPORT_SYMBOL(slow_work_enqueue);
/*
+ * Schedule a cull of the thread pool at some time in the near future
+ */
+static void slow_work_schedule_cull(void)
+{
+ mod_timer(&slow_work_cull_timer,
+ round_jiffies(jiffies + SLOW_WORK_CULL_TIMEOUT));
+}
+
+/*
* Worker thread culling algorithm
*/
static bool slow_work_cull_thread(void)
@@ -335,8 +344,7 @@
list_empty(&vslow_work_queue) &&
atomic_read(&slow_work_thread_count) >
slow_work_min_threads) {
- mod_timer(&slow_work_cull_timer,
- jiffies + SLOW_WORK_CULL_TIMEOUT);
+ slow_work_schedule_cull();
do_cull = true;
}
}
@@ -393,8 +401,7 @@
list_empty(&vslow_work_queue) &&
atomic_read(&slow_work_thread_count) >
slow_work_min_threads)
- mod_timer(&slow_work_cull_timer,
- jiffies + SLOW_WORK_CULL_TIMEOUT);
+ slow_work_schedule_cull();
continue;
}
@@ -458,7 +465,7 @@
if (atomic_dec_and_test(&slow_work_thread_count))
BUG(); /* we're running on a slow work thread... */
mod_timer(&slow_work_oom_timer,
- jiffies + SLOW_WORK_OOM_TIMEOUT);
+ round_jiffies(jiffies + SLOW_WORK_OOM_TIMEOUT));
} else {
/* ratelimit the starting of new threads */
mod_timer(&slow_work_oom_timer, jiffies + 1);
@@ -502,8 +509,7 @@
if (n < 0 && !slow_work_may_not_start_new_thread)
slow_work_enqueue(&slow_work_new_thread);
else if (n > 0)
- mod_timer(&slow_work_cull_timer,
- jiffies + SLOW_WORK_CULL_TIMEOUT);
+ slow_work_schedule_cull();
}
mutex_unlock(&slow_work_user_lock);
}
@@ -529,8 +535,7 @@
atomic_read(&slow_work_thread_count);
if (n < 0)
- mod_timer(&slow_work_cull_timer,
- jiffies + SLOW_WORK_CULL_TIMEOUT);
+ slow_work_schedule_cull();
}
mutex_unlock(&slow_work_user_lock);
}
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 258885a..b41fb71 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -382,6 +382,17 @@
EXPORT_SYMBOL(__tasklet_hi_schedule);
+void __tasklet_hi_schedule_first(struct tasklet_struct *t)
+{
+ BUG_ON(!irqs_disabled());
+
+ t->next = __get_cpu_var(tasklet_hi_vec).head;
+ __get_cpu_var(tasklet_hi_vec).head = t;
+ __raise_softirq_irqoff(HI_SOFTIRQ);
+}
+
+EXPORT_SYMBOL(__tasklet_hi_schedule_first);
+
static void tasklet_action(struct softirq_action *a)
{
struct tasklet_struct *list;
diff --git a/kernel/sys.c b/kernel/sys.c
index 438d99a..b3f1097 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1113,289 +1113,6 @@
return err;
}
-/*
- * Supplementary group IDs
- */
-
-/* init to 2 - one for init_task, one to ensure it is never freed */
-struct group_info init_groups = { .usage = ATOMIC_INIT(2) };
-
-struct group_info *groups_alloc(int gidsetsize)
-{
- struct group_info *group_info;
- int nblocks;
- int i;
-
- nblocks = (gidsetsize + NGROUPS_PER_BLOCK - 1) / NGROUPS_PER_BLOCK;
- /* Make sure we always allocate at least one indirect block pointer */
- nblocks = nblocks ? : 1;
- group_info = kmalloc(sizeof(*group_info) + nblocks*sizeof(gid_t *), GFP_USER);
- if (!group_info)
- return NULL;
- group_info->ngroups = gidsetsize;
- group_info->nblocks = nblocks;
- atomic_set(&group_info->usage, 1);
-
- if (gidsetsize <= NGROUPS_SMALL)
- group_info->blocks[0] = group_info->small_block;
- else {
- for (i = 0; i < nblocks; i++) {
- gid_t *b;
- b = (void *)__get_free_page(GFP_USER);
- if (!b)
- goto out_undo_partial_alloc;
- group_info->blocks[i] = b;
- }
- }
- return group_info;
-
-out_undo_partial_alloc:
- while (--i >= 0) {
- free_page((unsigned long)group_info->blocks[i]);
- }
- kfree(group_info);
- return NULL;
-}
-
-EXPORT_SYMBOL(groups_alloc);
-
-void groups_free(struct group_info *group_info)
-{
- if (group_info->blocks[0] != group_info->small_block) {
- int i;
- for (i = 0; i < group_info->nblocks; i++)
- free_page((unsigned long)group_info->blocks[i]);
- }
- kfree(group_info);
-}
-
-EXPORT_SYMBOL(groups_free);
-
-/* export the group_info to a user-space array */
-static int groups_to_user(gid_t __user *grouplist,
- const struct group_info *group_info)
-{
- int i;
- unsigned int count = group_info->ngroups;
-
- for (i = 0; i < group_info->nblocks; i++) {
- unsigned int cp_count = min(NGROUPS_PER_BLOCK, count);
- unsigned int len = cp_count * sizeof(*grouplist);
-
- if (copy_to_user(grouplist, group_info->blocks[i], len))
- return -EFAULT;
-
- grouplist += NGROUPS_PER_BLOCK;
- count -= cp_count;
- }
- return 0;
-}
-
-/* fill a group_info from a user-space array - it must be allocated already */
-static int groups_from_user(struct group_info *group_info,
- gid_t __user *grouplist)
-{
- int i;
- unsigned int count = group_info->ngroups;
-
- for (i = 0; i < group_info->nblocks; i++) {
- unsigned int cp_count = min(NGROUPS_PER_BLOCK, count);
- unsigned int len = cp_count * sizeof(*grouplist);
-
- if (copy_from_user(group_info->blocks[i], grouplist, len))
- return -EFAULT;
-
- grouplist += NGROUPS_PER_BLOCK;
- count -= cp_count;
- }
- return 0;
-}
-
-/* a simple Shell sort */
-static void groups_sort(struct group_info *group_info)
-{
- int base, max, stride;
- int gidsetsize = group_info->ngroups;
-
- for (stride = 1; stride < gidsetsize; stride = 3 * stride + 1)
- ; /* nothing */
- stride /= 3;
-
- while (stride) {
- max = gidsetsize - stride;
- for (base = 0; base < max; base++) {
- int left = base;
- int right = left + stride;
- gid_t tmp = GROUP_AT(group_info, right);
-
- while (left >= 0 && GROUP_AT(group_info, left) > tmp) {
- GROUP_AT(group_info, right) =
- GROUP_AT(group_info, left);
- right = left;
- left -= stride;
- }
- GROUP_AT(group_info, right) = tmp;
- }
- stride /= 3;
- }
-}
-
-/* a simple bsearch */
-int groups_search(const struct group_info *group_info, gid_t grp)
-{
- unsigned int left, right;
-
- if (!group_info)
- return 0;
-
- left = 0;
- right = group_info->ngroups;
- while (left < right) {
- unsigned int mid = (left+right)/2;
- int cmp = grp - GROUP_AT(group_info, mid);
- if (cmp > 0)
- left = mid + 1;
- else if (cmp < 0)
- right = mid;
- else
- return 1;
- }
- return 0;
-}
-
-/**
- * set_groups - Change a group subscription in a set of credentials
- * @new: The newly prepared set of credentials to alter
- * @group_info: The group list to install
- *
- * Validate a group subscription and, if valid, insert it into a set
- * of credentials.
- */
-int set_groups(struct cred *new, struct group_info *group_info)
-{
- int retval;
-
- retval = security_task_setgroups(group_info);
- if (retval)
- return retval;
-
- put_group_info(new->group_info);
- groups_sort(group_info);
- get_group_info(group_info);
- new->group_info = group_info;
- return 0;
-}
-
-EXPORT_SYMBOL(set_groups);
-
-/**
- * set_current_groups - Change current's group subscription
- * @group_info: The group list to impose
- *
- * Validate a group subscription and, if valid, impose it upon current's task
- * security record.
- */
-int set_current_groups(struct group_info *group_info)
-{
- struct cred *new;
- int ret;
-
- new = prepare_creds();
- if (!new)
- return -ENOMEM;
-
- ret = set_groups(new, group_info);
- if (ret < 0) {
- abort_creds(new);
- return ret;
- }
-
- return commit_creds(new);
-}
-
-EXPORT_SYMBOL(set_current_groups);
-
-SYSCALL_DEFINE2(getgroups, int, gidsetsize, gid_t __user *, grouplist)
-{
- const struct cred *cred = current_cred();
- int i;
-
- if (gidsetsize < 0)
- return -EINVAL;
-
- /* no need to grab task_lock here; it cannot change */
- i = cred->group_info->ngroups;
- if (gidsetsize) {
- if (i > gidsetsize) {
- i = -EINVAL;
- goto out;
- }
- if (groups_to_user(grouplist, cred->group_info)) {
- i = -EFAULT;
- goto out;
- }
- }
-out:
- return i;
-}
-
-/*
- * SMP: Our groups are copy-on-write. We can set them safely
- * without another task interfering.
- */
-
-SYSCALL_DEFINE2(setgroups, int, gidsetsize, gid_t __user *, grouplist)
-{
- struct group_info *group_info;
- int retval;
-
- if (!capable(CAP_SETGID))
- return -EPERM;
- if ((unsigned)gidsetsize > NGROUPS_MAX)
- return -EINVAL;
-
- group_info = groups_alloc(gidsetsize);
- if (!group_info)
- return -ENOMEM;
- retval = groups_from_user(group_info, grouplist);
- if (retval) {
- put_group_info(group_info);
- return retval;
- }
-
- retval = set_current_groups(group_info);
- put_group_info(group_info);
-
- return retval;
-}
-
-/*
- * Check whether we're fsgid/egid or in the supplemental group..
- */
-int in_group_p(gid_t grp)
-{
- const struct cred *cred = current_cred();
- int retval = 1;
-
- if (grp != cred->fsgid)
- retval = groups_search(cred->group_info, grp);
- return retval;
-}
-
-EXPORT_SYMBOL(in_group_p);
-
-int in_egroup_p(gid_t grp)
-{
- const struct cred *cred = current_cred();
- int retval = 1;
-
- if (grp != cred->egid)
- retval = groups_search(cred->group_info, grp);
- return retval;
-}
-
-EXPORT_SYMBOL(in_egroup_p);
-
DECLARE_RWSEM(uts_sem);
SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 0e51a35..ab462b9 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -27,6 +27,7 @@
#include <linux/security.h>
#include <linux/ctype.h>
#include <linux/utsname.h>
+#include <linux/kmemcheck.h>
#include <linux/smp_lock.h>
#include <linux/fs.h>
#include <linux/init.h>
@@ -967,6 +968,17 @@
.proc_handler = &proc_dointvec,
},
#endif
+#ifdef CONFIG_KMEMCHECK
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "kmemcheck",
+ .data = &kmemcheck_enabled,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
+#endif
+
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
@@ -1325,7 +1337,6 @@
.extra2 = &one,
},
#endif
-#ifdef CONFIG_UNEVICTABLE_LRU
{
.ctl_name = CTL_UNNUMBERED,
.procname = "scan_unevictable_pages",
@@ -1334,7 +1345,6 @@
.mode = 0644,
.proc_handler = &scan_unevictable_handler,
},
-#endif
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 4a13e5a..61071fe 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -147,7 +147,7 @@
disabled by default and can be runtime (re-)started
via:
- echo 0 > /debugfs/tracing/tracing_max_latency
+ echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
(Note that kernel size and overhead increases with this option
enabled. This option and the preempt-off timing option can be
@@ -168,7 +168,7 @@
disabled by default and can be runtime (re-)started
via:
- echo 0 > /debugfs/tracing/tracing_max_latency
+ echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
(Note that kernel size and overhead increases with this option
enabled. This option and the irqs-off timing option can be
@@ -261,7 +261,7 @@
This tracer profiles all the the likely and unlikely macros
in the kernel. It will display the results in:
- /debugfs/tracing/profile_annotated_branch
+ /sys/kernel/debug/tracing/profile_annotated_branch
Note: this will add a significant overhead, only turn this
on if you need to profile the system's use of these macros.
@@ -274,7 +274,7 @@
taken in the kernel is recorded whether it hit or miss.
The results will be displayed in:
- /debugfs/tracing/profile_branch
+ /sys/kernel/debug/tracing/profile_branch
This option also enables the likely/unlikely profiler.
@@ -323,7 +323,7 @@
select KALLSYMS
help
This special tracer records the maximum stack footprint of the
- kernel and displays it in debugfs/tracing/stack_trace.
+ kernel and displays it in /sys/kernel/debug/tracing/stack_trace.
This tracer works by hooking into every function call that the
kernel executes, and keeping a maximum stack depth value and
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 2e642b2..dc4dc70 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -10,6 +10,7 @@
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/hardirq.h>
+#include <linux/kmemcheck.h>
#include <linux/module.h>
#include <linux/percpu.h>
#include <linux/mutex.h>
@@ -1270,6 +1271,7 @@
if (tail < BUF_PAGE_SIZE) {
/* Mark the rest of the page with padding */
event = __rb_page_index(tail_page, tail);
+ kmemcheck_annotate_bitfield(event, bitfield);
rb_event_set_padding(event);
}
@@ -1327,6 +1329,7 @@
return NULL;
event = __rb_page_index(tail_page, tail);
+ kmemcheck_annotate_bitfield(event, bitfield);
rb_update_event(event, type, length);
/* The passed in type is zero for DATA */
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 8acd9b8..c1878bf 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -344,7 +344,7 @@
/*
* Copy the new maximum trace into the separate maximum-trace
* structure. (this way the maximum trace is permanently saved,
- * for later retrieval via /debugfs/tracing/latency_trace)
+ * for later retrieval via /sys/kernel/debug/tracing/latency_trace)
*/
static void
__update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu)
@@ -2414,21 +2414,20 @@
static const char readme_msg[] =
"tracing mini-HOWTO:\n\n"
- "# mkdir /debug\n"
- "# mount -t debugfs nodev /debug\n\n"
- "# cat /debug/tracing/available_tracers\n"
+ "# mount -t debugfs nodev /sys/kernel/debug\n\n"
+ "# cat /sys/kernel/debug/tracing/available_tracers\n"
"wakeup preemptirqsoff preemptoff irqsoff function sched_switch nop\n\n"
- "# cat /debug/tracing/current_tracer\n"
+ "# cat /sys/kernel/debug/tracing/current_tracer\n"
"nop\n"
- "# echo sched_switch > /debug/tracing/current_tracer\n"
- "# cat /debug/tracing/current_tracer\n"
+ "# echo sched_switch > /sys/kernel/debug/tracing/current_tracer\n"
+ "# cat /sys/kernel/debug/tracing/current_tracer\n"
"sched_switch\n"
- "# cat /debug/tracing/trace_options\n"
+ "# cat /sys/kernel/debug/tracing/trace_options\n"
"noprint-parent nosym-offset nosym-addr noverbose\n"
- "# echo print-parent > /debug/tracing/trace_options\n"
- "# echo 1 > /debug/tracing/tracing_enabled\n"
- "# cat /debug/tracing/trace > /tmp/trace.txt\n"
- "# echo 0 > /debug/tracing/tracing_enabled\n"
+ "# echo print-parent > /sys/kernel/debug/tracing/trace_options\n"
+ "# echo 1 > /sys/kernel/debug/tracing/tracing_enabled\n"
+ "# cat /sys/kernel/debug/tracing/trace > /tmp/trace.txt\n"
+ "# echo 0 > /sys/kernel/debug/tracing/tracing_enabled\n"
;
static ssize_t
diff --git a/kernel/user.c b/kernel/user.c
index 850e0ba..2c000e7 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -75,21 +75,6 @@
put_user_ns(up->user_ns);
}
-static struct user_struct *uid_hash_find(uid_t uid, struct hlist_head *hashent)
-{
- struct user_struct *user;
- struct hlist_node *h;
-
- hlist_for_each_entry(user, h, hashent, uidhash_node) {
- if (user->uid == uid) {
- atomic_inc(&user->__count);
- return user;
- }
- }
-
- return NULL;
-}
-
#ifdef CONFIG_USER_SCHED
static void sched_destroy_user(struct user_struct *up)
@@ -119,6 +104,23 @@
#if defined(CONFIG_USER_SCHED) && defined(CONFIG_SYSFS)
+static struct user_struct *uid_hash_find(uid_t uid, struct hlist_head *hashent)
+{
+ struct user_struct *user;
+ struct hlist_node *h;
+
+ hlist_for_each_entry(user, h, hashent, uidhash_node) {
+ if (user->uid == uid) {
+ /* possibly resurrect an "almost deleted" object */
+ if (atomic_inc_return(&user->__count) == 1)
+ cancel_delayed_work(&user->work);
+ return user;
+ }
+ }
+
+ return NULL;
+}
+
static struct kset *uids_kset; /* represents the /sys/kernel/uids/ directory */
static DEFINE_MUTEX(uids_mutex);
@@ -283,12 +285,12 @@
return uids_user_create(&root_user);
}
-/* work function to remove sysfs directory for a user and free up
+/* delayed work function to remove sysfs directory for a user and free up
* corresponding structures.
*/
static void cleanup_user_struct(struct work_struct *w)
{
- struct user_struct *up = container_of(w, struct user_struct, work);
+ struct user_struct *up = container_of(w, struct user_struct, work.work);
unsigned long flags;
int remove_user = 0;
@@ -297,15 +299,12 @@
*/
uids_mutex_lock();
- local_irq_save(flags);
-
- if (atomic_dec_and_lock(&up->__count, &uidhash_lock)) {
+ spin_lock_irqsave(&uidhash_lock, flags);
+ if (atomic_read(&up->__count) == 0) {
uid_hash_remove(up);
remove_user = 1;
- spin_unlock_irqrestore(&uidhash_lock, flags);
- } else {
- local_irq_restore(flags);
}
+ spin_unlock_irqrestore(&uidhash_lock, flags);
if (!remove_user)
goto done;
@@ -331,16 +330,28 @@
*/
static void free_user(struct user_struct *up, unsigned long flags)
{
- /* restore back the count */
- atomic_inc(&up->__count);
spin_unlock_irqrestore(&uidhash_lock, flags);
-
- INIT_WORK(&up->work, cleanup_user_struct);
- schedule_work(&up->work);
+ INIT_DELAYED_WORK(&up->work, cleanup_user_struct);
+ schedule_delayed_work(&up->work, msecs_to_jiffies(1000));
}
#else /* CONFIG_USER_SCHED && CONFIG_SYSFS */
+static struct user_struct *uid_hash_find(uid_t uid, struct hlist_head *hashent)
+{
+ struct user_struct *user;
+ struct hlist_node *h;
+
+ hlist_for_each_entry(user, h, hashent, uidhash_node) {
+ if (user->uid == uid) {
+ atomic_inc(&user->__count);
+ return user;
+ }
+ }
+
+ return NULL;
+}
+
int uids_sysfs_init(void) { return 0; }
static inline int uids_user_create(struct user_struct *up) { return 0; }
static inline void uids_mutex_lock(void) { }
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 116a350..6b0c2d8a 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -300,7 +300,7 @@
config DEBUG_SLAB
bool "Debug slab memory allocations"
- depends on DEBUG_KERNEL && SLAB
+ depends on DEBUG_KERNEL && SLAB && !KMEMCHECK
help
Say Y here to have the kernel do limited verification on memory
allocation as well as poisoning memory on free to catch use of freed
@@ -312,7 +312,7 @@
config SLUB_DEBUG_ON
bool "SLUB debugging on by default"
- depends on SLUB && SLUB_DEBUG
+ depends on SLUB && SLUB_DEBUG && !KMEMCHECK
default n
help
Boot with debugging on by default. SLUB boots by default with
@@ -996,3 +996,5 @@
source "samples/Kconfig"
source "lib/Kconfig.kgdb"
+
+source "lib/Kconfig.kmemcheck"
diff --git a/lib/Kconfig.kmemcheck b/lib/Kconfig.kmemcheck
new file mode 100644
index 0000000..603c81b
--- /dev/null
+++ b/lib/Kconfig.kmemcheck
@@ -0,0 +1,91 @@
+config HAVE_ARCH_KMEMCHECK
+ bool
+
+menuconfig KMEMCHECK
+ bool "kmemcheck: trap use of uninitialized memory"
+ depends on DEBUG_KERNEL
+ depends on !X86_USE_3DNOW
+ depends on SLUB || SLAB
+ depends on !CC_OPTIMIZE_FOR_SIZE
+ depends on !FUNCTION_TRACER
+ select FRAME_POINTER
+ select STACKTRACE
+ default n
+ help
+ This option enables tracing of dynamically allocated kernel memory
+ to see if memory is used before it has been given an initial value.
+ Be aware that this requires half of your memory for bookkeeping and
+ will insert extra code at *every* read and write to tracked memory
+ thus slow down the kernel code (but user code is unaffected).
+
+ The kernel may be started with kmemcheck=0 or kmemcheck=1 to disable
+ or enable kmemcheck at boot-time. If the kernel is started with
+ kmemcheck=0, the large memory and CPU overhead is not incurred.
+
+choice
+ prompt "kmemcheck: default mode at boot"
+ depends on KMEMCHECK
+ default KMEMCHECK_ONESHOT_BY_DEFAULT
+ help
+ This option controls the default behaviour of kmemcheck when the
+ kernel boots and no kmemcheck= parameter is given.
+
+config KMEMCHECK_DISABLED_BY_DEFAULT
+ bool "disabled"
+ depends on KMEMCHECK
+
+config KMEMCHECK_ENABLED_BY_DEFAULT
+ bool "enabled"
+ depends on KMEMCHECK
+
+config KMEMCHECK_ONESHOT_BY_DEFAULT
+ bool "one-shot"
+ depends on KMEMCHECK
+ help
+ In one-shot mode, only the first error detected is reported before
+ kmemcheck is disabled.
+
+endchoice
+
+config KMEMCHECK_QUEUE_SIZE
+ int "kmemcheck: error queue size"
+ depends on KMEMCHECK
+ default 64
+ help
+ Select the maximum number of errors to store in the queue. Since
+ errors can occur virtually anywhere and in any context, we need a
+ temporary storage area which is guarantueed not to generate any
+ other faults. The queue will be emptied as soon as a tasklet may
+ be scheduled. If the queue is full, new error reports will be
+ lost.
+
+config KMEMCHECK_SHADOW_COPY_SHIFT
+ int "kmemcheck: shadow copy size (5 => 32 bytes, 6 => 64 bytes)"
+ depends on KMEMCHECK
+ range 2 8
+ default 5
+ help
+ Select the number of shadow bytes to save along with each entry of
+ the queue. These bytes indicate what parts of an allocation are
+ initialized, uninitialized, etc. and will be displayed when an
+ error is detected to help the debugging of a particular problem.
+
+config KMEMCHECK_PARTIAL_OK
+ bool "kmemcheck: allow partially uninitialized memory"
+ depends on KMEMCHECK
+ default y
+ help
+ This option works around certain GCC optimizations that produce
+ 32-bit reads from 16-bit variables where the upper 16 bits are
+ thrown away afterwards. This may of course also hide some real
+ bugs.
+
+config KMEMCHECK_BITOPS_OK
+ bool "kmemcheck: allow bit-field manipulation"
+ depends on KMEMCHECK
+ default n
+ help
+ This option silences warnings that would be generated for bit-field
+ accesses where not all the bits are initialized at the same time.
+ This may also hide some real bugs.
+
diff --git a/lib/dec_and_lock.c b/lib/dec_and_lock.c
index a65c314..e73822a 100644
--- a/lib/dec_and_lock.c
+++ b/lib/dec_and_lock.c
@@ -19,11 +19,10 @@
*/
int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock)
{
-#ifdef CONFIG_SMP
/* Subtract 1 from counter unless that drops it to 0 (ie. it was 1) */
if (atomic_add_unless(atomic, -1, 1))
return 0;
-#endif
+
/* Otherwise do it the slow way */
spin_lock(lock);
if (atomic_dec_and_test(atomic))
diff --git a/lib/genalloc.c b/lib/genalloc.c
index f6d276d..eed2bdb 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -85,7 +85,6 @@
int bit, end_bit;
- write_lock(&pool->lock);
list_for_each_safe(_chunk, _next_chunk, &pool->chunks) {
chunk = list_entry(_chunk, struct gen_pool_chunk, next_chunk);
list_del(&chunk->next_chunk);
diff --git a/lib/hexdump.c b/lib/hexdump.c
index f07c0db..39af256 100644
--- a/lib/hexdump.c
+++ b/lib/hexdump.c
@@ -65,7 +65,8 @@
for (j = 0; j < ngroups; j++)
lx += scnprintf(linebuf + lx, linebuflen - lx,
- "%16.16llx ", (unsigned long long)*(ptr8 + j));
+ "%s%16.16llx", j ? " " : "",
+ (unsigned long long)*(ptr8 + j));
ascii_column = 17 * ngroups + 2;
break;
}
@@ -76,7 +77,7 @@
for (j = 0; j < ngroups; j++)
lx += scnprintf(linebuf + lx, linebuflen - lx,
- "%8.8x ", *(ptr4 + j));
+ "%s%8.8x", j ? " " : "", *(ptr4 + j));
ascii_column = 9 * ngroups + 2;
break;
}
@@ -87,19 +88,21 @@
for (j = 0; j < ngroups; j++)
lx += scnprintf(linebuf + lx, linebuflen - lx,
- "%4.4x ", *(ptr2 + j));
+ "%s%4.4x", j ? " " : "", *(ptr2 + j));
ascii_column = 5 * ngroups + 2;
break;
}
default:
- for (j = 0; (j < rowsize) && (j < len) && (lx + 4) < linebuflen;
- j++) {
+ for (j = 0; (j < len) && (lx + 3) <= linebuflen; j++) {
ch = ptr[j];
linebuf[lx++] = hex_asc_hi(ch);
linebuf[lx++] = hex_asc_lo(ch);
linebuf[lx++] = ' ';
}
+ if (j)
+ lx--;
+
ascii_column = 3 * rowsize + 2;
break;
}
@@ -108,7 +111,7 @@
while (lx < (linebuflen - 1) && lx < (ascii_column - 1))
linebuf[lx++] = ' ';
- for (j = 0; (j < rowsize) && (j < len) && (lx + 2) < linebuflen; j++)
+ for (j = 0; (j < len) && (lx + 2) < linebuflen; j++)
linebuf[lx++] = (isascii(ptr[j]) && isprint(ptr[j])) ? ptr[j]
: '.';
nil:
diff --git a/lib/kobject.c b/lib/kobject.c
index bacf6fe..b512b74 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -793,11 +793,16 @@
struct kobject *parent_kobj)
{
struct kset *kset;
+ int retval;
kset = kzalloc(sizeof(*kset), GFP_KERNEL);
if (!kset)
return NULL;
- kobject_set_name(&kset->kobj, name);
+ retval = kobject_set_name(&kset->kobj, name);
+ if (retval) {
+ kfree(kset);
+ return NULL;
+ }
kset->uevent_ops = uevent_ops;
kset->kobj.parent = parent_kobj;
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index 4bb42a0..23abbd9 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -351,20 +351,12 @@
}
EXPORT_SYMBOL(radix_tree_insert);
-/**
- * radix_tree_lookup_slot - lookup a slot in a radix tree
- * @root: radix tree root
- * @index: index key
- *
- * Returns: the slot corresponding to the position @index in the
- * radix tree @root. This is useful for update-if-exists operations.
- *
- * This function can be called under rcu_read_lock iff the slot is not
- * modified by radix_tree_replace_slot, otherwise it must be called
- * exclusive from other writers. Any dereference of the slot must be done
- * using radix_tree_deref_slot.
+/*
+ * is_slot == 1 : search for the slot.
+ * is_slot == 0 : search for the node.
*/
-void **radix_tree_lookup_slot(struct radix_tree_root *root, unsigned long index)
+static void *radix_tree_lookup_element(struct radix_tree_root *root,
+ unsigned long index, int is_slot)
{
unsigned int height, shift;
struct radix_tree_node *node, **slot;
@@ -376,7 +368,7 @@
if (!radix_tree_is_indirect_ptr(node)) {
if (index > 0)
return NULL;
- return (void **)&root->rnode;
+ return is_slot ? (void *)&root->rnode : node;
}
node = radix_tree_indirect_to_ptr(node);
@@ -397,7 +389,25 @@
height--;
} while (height > 0);
- return (void **)slot;
+ return is_slot ? (void *)slot:node;
+}
+
+/**
+ * radix_tree_lookup_slot - lookup a slot in a radix tree
+ * @root: radix tree root
+ * @index: index key
+ *
+ * Returns: the slot corresponding to the position @index in the
+ * radix tree @root. This is useful for update-if-exists operations.
+ *
+ * This function can be called under rcu_read_lock iff the slot is not
+ * modified by radix_tree_replace_slot, otherwise it must be called
+ * exclusive from other writers. Any dereference of the slot must be done
+ * using radix_tree_deref_slot.
+ */
+void **radix_tree_lookup_slot(struct radix_tree_root *root, unsigned long index)
+{
+ return (void **)radix_tree_lookup_element(root, index, 1);
}
EXPORT_SYMBOL(radix_tree_lookup_slot);
@@ -415,38 +425,7 @@
*/
void *radix_tree_lookup(struct radix_tree_root *root, unsigned long index)
{
- unsigned int height, shift;
- struct radix_tree_node *node, **slot;
-
- node = rcu_dereference(root->rnode);
- if (node == NULL)
- return NULL;
-
- if (!radix_tree_is_indirect_ptr(node)) {
- if (index > 0)
- return NULL;
- return node;
- }
- node = radix_tree_indirect_to_ptr(node);
-
- height = node->height;
- if (index > radix_tree_maxindex(height))
- return NULL;
-
- shift = (height-1) * RADIX_TREE_MAP_SHIFT;
-
- do {
- slot = (struct radix_tree_node **)
- (node->slots + ((index>>shift) & RADIX_TREE_MAP_MASK));
- node = rcu_dereference(*slot);
- if (node == NULL)
- return NULL;
-
- shift -= RADIX_TREE_MAP_SHIFT;
- height--;
- } while (height > 0);
-
- return node;
+ return radix_tree_lookup_element(root, index, 0);
}
EXPORT_SYMBOL(radix_tree_lookup);
@@ -666,6 +645,43 @@
}
EXPORT_SYMBOL(radix_tree_next_hole);
+/**
+ * radix_tree_prev_hole - find the prev hole (not-present entry)
+ * @root: tree root
+ * @index: index key
+ * @max_scan: maximum range to search
+ *
+ * Search backwards in the range [max(index-max_scan+1, 0), index]
+ * for the first hole.
+ *
+ * Returns: the index of the hole if found, otherwise returns an index
+ * outside of the set specified (in which case 'index - return >= max_scan'
+ * will be true). In rare cases of wrap-around, LONG_MAX will be returned.
+ *
+ * radix_tree_next_hole may be called under rcu_read_lock. However, like
+ * radix_tree_gang_lookup, this will not atomically search a snapshot of
+ * the tree at a single point in time. For example, if a hole is created
+ * at index 10, then subsequently a hole is created at index 5,
+ * radix_tree_prev_hole covering both indexes may return 5 if called under
+ * rcu_read_lock.
+ */
+unsigned long radix_tree_prev_hole(struct radix_tree_root *root,
+ unsigned long index, unsigned long max_scan)
+{
+ unsigned long i;
+
+ for (i = 0; i < max_scan; i++) {
+ if (!radix_tree_lookup(root, index))
+ break;
+ index--;
+ if (index == LONG_MAX)
+ break;
+ }
+
+ return index;
+}
+EXPORT_SYMBOL(radix_tree_prev_hole);
+
static unsigned int
__lookup(struct radix_tree_node *slot, void ***results, unsigned long index,
unsigned int max_items, unsigned long *next_index)
diff --git a/lib/rbtree.c b/lib/rbtree.c
index f653659..e2aa3be 100644
--- a/lib/rbtree.c
+++ b/lib/rbtree.c
@@ -231,24 +231,8 @@
node = node->rb_right;
while ((left = node->rb_left) != NULL)
node = left;
- child = node->rb_right;
- parent = rb_parent(node);
- color = rb_color(node);
- if (child)
- rb_set_parent(child, parent);
- if (parent == old) {
- parent->rb_right = child;
- parent = node;
- } else
- parent->rb_left = child;
-
- node->rb_parent_color = old->rb_parent_color;
- node->rb_right = old->rb_right;
- node->rb_left = old->rb_left;
-
- if (rb_parent(old))
- {
+ if (rb_parent(old)) {
if (rb_parent(old)->rb_left == old)
rb_parent(old)->rb_left = node;
else
@@ -256,9 +240,25 @@
} else
root->rb_node = node;
- rb_set_parent(old->rb_left, node);
- if (old->rb_right)
+ child = node->rb_right;
+ parent = rb_parent(node);
+ color = rb_color(node);
+
+ if (parent == old) {
+ parent = node;
+ } else {
+ if (child)
+ rb_set_parent(child, parent);
+ parent->rb_left = child;
+
+ node->rb_right = old->rb_right;
rb_set_parent(old->rb_right, node);
+ }
+
+ node->rb_parent_color = old->rb_parent_color;
+ node->rb_left = old->rb_left;
+ rb_set_parent(old->rb_left, node);
+
goto color;
}
diff --git a/mm/Kconfig b/mm/Kconfig
index 6f4610a..c948d4c 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -203,25 +203,13 @@
def_bool y
depends on !ARCH_NO_VIRT_TO_BUS
-config UNEVICTABLE_LRU
- bool "Add LRU list to track non-evictable pages"
- default y
- help
- Keeps unevictable pages off of the active and inactive pageout
- lists, so kswapd will not waste CPU time or have its balancing
- algorithms thrown off by scanning these pages. Selecting this
- will use one page flag and increase the code size a little,
- say Y unless you know what you are doing.
-
- See Documentation/vm/unevictable-lru.txt for more information.
-
config HAVE_MLOCK
bool
default y if MMU=y
config HAVE_MLOCKED_PAGE_BIT
bool
- default y if HAVE_MLOCK=y && UNEVICTABLE_LRU=y
+ default y if HAVE_MLOCK=y
config MMU_NOTIFIER
bool
diff --git a/mm/Kconfig.debug b/mm/Kconfig.debug
index bb01e29..aa99fd1 100644
--- a/mm/Kconfig.debug
+++ b/mm/Kconfig.debug
@@ -2,6 +2,7 @@
bool "Debug page memory allocations"
depends on DEBUG_KERNEL && ARCH_SUPPORTS_DEBUG_PAGEALLOC
depends on !HIBERNATION || !PPC && !SPARC
+ depends on !KMEMCHECK
---help---
Unmap pages from the kernel linear mapping after free_pages().
This results in a large slowdown, but helps to find certain types
diff --git a/mm/Makefile b/mm/Makefile
index e89acb0..5e0bd64 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -12,6 +12,7 @@
readahead.o swap.o truncate.o vmscan.o shmem.o \
prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
page_isolation.o mm_init.o $(mmu-y)
+obj-y += init-mm.o
obj-$(CONFIG_PROC_PAGE_MONITOR) += pagewalk.o
obj-$(CONFIG_BOUNCE) += bounce.o
@@ -27,6 +28,7 @@
obj-$(CONFIG_PAGE_POISONING) += debug-pagealloc.o
obj-$(CONFIG_SLAB) += slab.o
obj-$(CONFIG_SLUB) += slub.o
+obj-$(CONFIG_KMEMCHECK) += kmemcheck.o
obj-$(CONFIG_FAILSLAB) += failslab.o
obj-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o
obj-$(CONFIG_FS_XIP) += filemap_xip.o
diff --git a/mm/fadvise.c b/mm/fadvise.c
index 54a0f80..e433592 100644
--- a/mm/fadvise.c
+++ b/mm/fadvise.c
@@ -101,7 +101,7 @@
ret = force_page_cache_readahead(mapping, file,
start_index,
- max_sane_readahead(nrpages));
+ nrpages);
if (ret > 0)
ret = 0;
break;
diff --git a/mm/filemap.c b/mm/filemap.c
index 1b60f30..2239671 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -521,7 +521,7 @@
{
if (cpuset_do_page_mem_spread()) {
int n = cpuset_mem_spread_node();
- return alloc_pages_node(n, gfp, 0);
+ return alloc_pages_exact_node(n, gfp, 0);
}
return alloc_pages(gfp, 0);
}
@@ -1004,9 +1004,6 @@
static void shrink_readahead_size_eio(struct file *filp,
struct file_ra_state *ra)
{
- if (!ra->ra_pages)
- return;
-
ra->ra_pages /= 4;
}
@@ -1390,8 +1387,7 @@
if (!mapping || !mapping->a_ops || !mapping->a_ops->readpage)
return -EINVAL;
- force_page_cache_readahead(mapping, filp, index,
- max_sane_readahead(nr));
+ force_page_cache_readahead(mapping, filp, index, nr);
return 0;
}
@@ -1457,6 +1453,73 @@
#define MMAP_LOTSAMISS (100)
+/*
+ * Synchronous readahead happens when we don't even find
+ * a page in the page cache at all.
+ */
+static void do_sync_mmap_readahead(struct vm_area_struct *vma,
+ struct file_ra_state *ra,
+ struct file *file,
+ pgoff_t offset)
+{
+ unsigned long ra_pages;
+ struct address_space *mapping = file->f_mapping;
+
+ /* If we don't want any read-ahead, don't bother */
+ if (VM_RandomReadHint(vma))
+ return;
+
+ if (VM_SequentialReadHint(vma) ||
+ offset - 1 == (ra->prev_pos >> PAGE_CACHE_SHIFT)) {
+ page_cache_sync_readahead(mapping, ra, file, offset,
+ ra->ra_pages);
+ return;
+ }
+
+ if (ra->mmap_miss < INT_MAX)
+ ra->mmap_miss++;
+
+ /*
+ * Do we miss much more than hit in this file? If so,
+ * stop bothering with read-ahead. It will only hurt.
+ */
+ if (ra->mmap_miss > MMAP_LOTSAMISS)
+ return;
+
+ /*
+ * mmap read-around
+ */
+ ra_pages = max_sane_readahead(ra->ra_pages);
+ if (ra_pages) {
+ ra->start = max_t(long, 0, offset - ra_pages/2);
+ ra->size = ra_pages;
+ ra->async_size = 0;
+ ra_submit(ra, mapping, file);
+ }
+}
+
+/*
+ * Asynchronous readahead happens when we find the page and PG_readahead,
+ * so we want to possibly extend the readahead further..
+ */
+static void do_async_mmap_readahead(struct vm_area_struct *vma,
+ struct file_ra_state *ra,
+ struct file *file,
+ struct page *page,
+ pgoff_t offset)
+{
+ struct address_space *mapping = file->f_mapping;
+
+ /* If we don't want any read-ahead, don't bother */
+ if (VM_RandomReadHint(vma))
+ return;
+ if (ra->mmap_miss > 0)
+ ra->mmap_miss--;
+ if (PageReadahead(page))
+ page_cache_async_readahead(mapping, ra, file,
+ page, offset, ra->ra_pages);
+}
+
/**
* filemap_fault - read in file data for page fault handling
* @vma: vma in which the fault was taken
@@ -1476,78 +1539,44 @@
struct address_space *mapping = file->f_mapping;
struct file_ra_state *ra = &file->f_ra;
struct inode *inode = mapping->host;
+ pgoff_t offset = vmf->pgoff;
struct page *page;
pgoff_t size;
- int did_readaround = 0;
int ret = 0;
size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- if (vmf->pgoff >= size)
+ if (offset >= size)
return VM_FAULT_SIGBUS;
- /* If we don't want any read-ahead, don't bother */
- if (VM_RandomReadHint(vma))
- goto no_cached_page;
-
/*
* Do we have something in the page cache already?
*/
-retry_find:
- page = find_lock_page(mapping, vmf->pgoff);
- /*
- * For sequential accesses, we use the generic readahead logic.
- */
- if (VM_SequentialReadHint(vma)) {
- if (!page) {
- page_cache_sync_readahead(mapping, ra, file,
- vmf->pgoff, 1);
- page = find_lock_page(mapping, vmf->pgoff);
- if (!page)
- goto no_cached_page;
- }
- if (PageReadahead(page)) {
- page_cache_async_readahead(mapping, ra, file, page,
- vmf->pgoff, 1);
- }
- }
-
- if (!page) {
- unsigned long ra_pages;
-
- ra->mmap_miss++;
-
+ page = find_get_page(mapping, offset);
+ if (likely(page)) {
/*
- * Do we miss much more than hit in this file? If so,
- * stop bothering with read-ahead. It will only hurt.
+ * We found the page, so try async readahead before
+ * waiting for the lock.
*/
- if (ra->mmap_miss > MMAP_LOTSAMISS)
+ do_async_mmap_readahead(vma, ra, file, page, offset);
+ lock_page(page);
+
+ /* Did it get truncated? */
+ if (unlikely(page->mapping != mapping)) {
+ unlock_page(page);
+ put_page(page);
goto no_cached_page;
-
- /*
- * To keep the pgmajfault counter straight, we need to
- * check did_readaround, as this is an inner loop.
- */
- if (!did_readaround) {
- ret = VM_FAULT_MAJOR;
- count_vm_event(PGMAJFAULT);
}
- did_readaround = 1;
- ra_pages = max_sane_readahead(file->f_ra.ra_pages);
- if (ra_pages) {
- pgoff_t start = 0;
-
- if (vmf->pgoff > ra_pages / 2)
- start = vmf->pgoff - ra_pages / 2;
- do_page_cache_readahead(mapping, file, start, ra_pages);
- }
- page = find_lock_page(mapping, vmf->pgoff);
+ } else {
+ /* No page in the page cache at all */
+ do_sync_mmap_readahead(vma, ra, file, offset);
+ count_vm_event(PGMAJFAULT);
+ ret = VM_FAULT_MAJOR;
+retry_find:
+ page = find_lock_page(mapping, offset);
if (!page)
goto no_cached_page;
}
- if (!did_readaround)
- ra->mmap_miss--;
-
/*
* We have a locked page in the page cache, now we need to check
* that it's up-to-date. If not, it is going to be due to an error.
@@ -1555,18 +1584,18 @@
if (unlikely(!PageUptodate(page)))
goto page_not_uptodate;
- /* Must recheck i_size under page lock */
+ /*
+ * Found the page and have a reference on it.
+ * We must recheck i_size under page lock.
+ */
size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- if (unlikely(vmf->pgoff >= size)) {
+ if (unlikely(offset >= size)) {
unlock_page(page);
page_cache_release(page);
return VM_FAULT_SIGBUS;
}
- /*
- * Found the page and have a reference on it.
- */
- ra->prev_pos = (loff_t)page->index << PAGE_CACHE_SHIFT;
+ ra->prev_pos = (loff_t)offset << PAGE_CACHE_SHIFT;
vmf->page = page;
return ret | VM_FAULT_LOCKED;
@@ -1575,7 +1604,7 @@
* We're only likely to ever get here if MADV_RANDOM is in
* effect.
*/
- error = page_cache_read(file, vmf->pgoff);
+ error = page_cache_read(file, offset);
/*
* The page we want has now been added to the page cache.
@@ -1595,12 +1624,6 @@
return VM_FAULT_SIGBUS;
page_not_uptodate:
- /* IO error path */
- if (!did_readaround) {
- ret = VM_FAULT_MAJOR;
- count_vm_event(PGMAJFAULT);
- }
-
/*
* Umm, take care of errors if the page isn't up-to-date.
* Try to re-read it _once_. We do this synchronously,
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index e83ad2c..a56e6f3 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -578,41 +578,6 @@
hugetlb_put_quota(mapping, 1);
}
-/*
- * Increment or decrement surplus_huge_pages. Keep node-specific counters
- * balanced by operating on them in a round-robin fashion.
- * Returns 1 if an adjustment was made.
- */
-static int adjust_pool_surplus(struct hstate *h, int delta)
-{
- static int prev_nid;
- int nid = prev_nid;
- int ret = 0;
-
- VM_BUG_ON(delta != -1 && delta != 1);
- do {
- nid = next_node(nid, node_online_map);
- if (nid == MAX_NUMNODES)
- nid = first_node(node_online_map);
-
- /* To shrink on this node, there must be a surplus page */
- if (delta < 0 && !h->surplus_huge_pages_node[nid])
- continue;
- /* Surplus cannot exceed the total number of pages */
- if (delta > 0 && h->surplus_huge_pages_node[nid] >=
- h->nr_huge_pages_node[nid])
- continue;
-
- h->surplus_huge_pages += delta;
- h->surplus_huge_pages_node[nid] += delta;
- ret = 1;
- break;
- } while (nid != prev_nid);
-
- prev_nid = nid;
- return ret;
-}
-
static void prep_new_huge_page(struct hstate *h, struct page *page, int nid)
{
set_compound_page_dtor(page, free_huge_page);
@@ -623,6 +588,34 @@
put_page(page); /* free it into the hugepage allocator */
}
+static void prep_compound_gigantic_page(struct page *page, unsigned long order)
+{
+ int i;
+ int nr_pages = 1 << order;
+ struct page *p = page + 1;
+
+ /* we rely on prep_new_huge_page to set the destructor */
+ set_compound_order(page, order);
+ __SetPageHead(page);
+ for (i = 1; i < nr_pages; i++, p = mem_map_next(p, page, i)) {
+ __SetPageTail(p);
+ p->first_page = page;
+ }
+}
+
+int PageHuge(struct page *page)
+{
+ compound_page_dtor *dtor;
+
+ if (!PageCompound(page))
+ return 0;
+
+ page = compound_head(page);
+ dtor = get_compound_page_dtor(page);
+
+ return dtor == free_huge_page;
+}
+
static struct page *alloc_fresh_huge_page_node(struct hstate *h, int nid)
{
struct page *page;
@@ -630,7 +623,7 @@
if (h->order >= MAX_ORDER)
return NULL;
- page = alloc_pages_node(nid,
+ page = alloc_pages_exact_node(nid,
htlb_alloc_mask|__GFP_COMP|__GFP_THISNODE|
__GFP_REPEAT|__GFP_NOWARN,
huge_page_order(h));
@@ -649,7 +642,7 @@
* Use a helper variable to find the next node and then
* copy it back to hugetlb_next_nid afterwards:
* otherwise there's a window in which a racer might
- * pass invalid nid MAX_NUMNODES to alloc_pages_node.
+ * pass invalid nid MAX_NUMNODES to alloc_pages_exact_node.
* But we don't need to use a spin_lock here: it really
* doesn't matter if occasionally a racer chooses the
* same nid as we do. Move nid forward in the mask even
@@ -875,7 +868,7 @@
* can no longer free unreserved surplus pages. This occurs when
* the nodes with surplus pages have no free pages.
*/
- unsigned long remaining_iterations = num_online_nodes();
+ unsigned long remaining_iterations = nr_online_nodes;
/* Uncommit the reservation */
h->resv_huge_pages -= unused_resv_pages;
@@ -904,7 +897,7 @@
h->surplus_huge_pages--;
h->surplus_huge_pages_node[nid]--;
nr_pages--;
- remaining_iterations = num_online_nodes();
+ remaining_iterations = nr_online_nodes;
}
}
}
@@ -1140,6 +1133,41 @@
}
#endif
+/*
+ * Increment or decrement surplus_huge_pages. Keep node-specific counters
+ * balanced by operating on them in a round-robin fashion.
+ * Returns 1 if an adjustment was made.
+ */
+static int adjust_pool_surplus(struct hstate *h, int delta)
+{
+ static int prev_nid;
+ int nid = prev_nid;
+ int ret = 0;
+
+ VM_BUG_ON(delta != -1 && delta != 1);
+ do {
+ nid = next_node(nid, node_online_map);
+ if (nid == MAX_NUMNODES)
+ nid = first_node(node_online_map);
+
+ /* To shrink on this node, there must be a surplus page */
+ if (delta < 0 && !h->surplus_huge_pages_node[nid])
+ continue;
+ /* Surplus cannot exceed the total number of pages */
+ if (delta > 0 && h->surplus_huge_pages_node[nid] >=
+ h->nr_huge_pages_node[nid])
+ continue;
+
+ h->surplus_huge_pages += delta;
+ h->surplus_huge_pages_node[nid] += delta;
+ ret = 1;
+ break;
+ } while (nid != prev_nid);
+
+ prev_nid = nid;
+ return ret;
+}
+
#define persistent_huge_pages(h) (h->nr_huge_pages - h->surplus_huge_pages)
static unsigned long set_max_huge_pages(struct hstate *h, unsigned long count)
{
diff --git a/mm/init-mm.c b/mm/init-mm.c
new file mode 100644
index 0000000..57aba0d
--- /dev/null
+++ b/mm/init-mm.c
@@ -0,0 +1,20 @@
+#include <linux/mm_types.h>
+#include <linux/rbtree.h>
+#include <linux/rwsem.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/cpumask.h>
+
+#include <asm/atomic.h>
+#include <asm/pgtable.h>
+
+struct mm_struct init_mm = {
+ .mm_rb = RB_ROOT,
+ .pgd = swapper_pg_dir,
+ .mm_users = ATOMIC_INIT(2),
+ .mm_count = ATOMIC_INIT(1),
+ .mmap_sem = __RWSEM_INITIALIZER(init_mm.mmap_sem),
+ .page_table_lock = __SPIN_LOCK_UNLOCKED(init_mm.page_table_lock),
+ .mmlist = LIST_HEAD_INIT(init_mm.mmlist),
+ .cpu_vm_mask = CPU_MASK_ALL,
+};
diff --git a/mm/internal.h b/mm/internal.h
index 987bb03..f290c4d 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -16,9 +16,6 @@
void free_pgtables(struct mmu_gather *tlb, struct vm_area_struct *start_vma,
unsigned long floor, unsigned long ceiling);
-extern void prep_compound_page(struct page *page, unsigned long order);
-extern void prep_compound_gigantic_page(struct page *page, unsigned long order);
-
static inline void set_page_count(struct page *page, int v)
{
atomic_set(&page->_count, v);
@@ -51,6 +48,8 @@
*/
extern unsigned long highest_memmap_pfn;
extern void __free_pages_bootmem(struct page *page, unsigned int order);
+extern void prep_compound_page(struct page *page, unsigned long order);
+
/*
* function for dealing with page's order in buddy system.
@@ -74,7 +73,6 @@
}
#endif
-#ifdef CONFIG_UNEVICTABLE_LRU
/*
* unevictable_migrate_page() called only from migrate_page_copy() to
* migrate unevictable flag to new page.
@@ -86,11 +84,6 @@
if (TestClearPageUnevictable(old))
SetPageUnevictable(new);
}
-#else
-static inline void unevictable_migrate_page(struct page *new, struct page *old)
-{
-}
-#endif
#ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT
/*
@@ -150,23 +143,6 @@
}
}
-/*
- * free_page_mlock() -- clean up attempts to free and mlocked() page.
- * Page should not be on lru, so no need to fix that up.
- * free_pages_check() will verify...
- */
-static inline void free_page_mlock(struct page *page)
-{
- if (unlikely(TestClearPageMlocked(page))) {
- unsigned long flags;
-
- local_irq_save(flags);
- __dec_zone_page_state(page, NR_MLOCK);
- __count_vm_event(UNEVICTABLE_MLOCKFREED);
- local_irq_restore(flags);
- }
-}
-
#else /* CONFIG_HAVE_MLOCKED_PAGE_BIT */
static inline int is_mlocked_vma(struct vm_area_struct *v, struct page *p)
{
@@ -175,7 +151,6 @@
static inline void clear_page_mlock(struct page *page) { }
static inline void mlock_vma_page(struct page *page) { }
static inline void mlock_migrate_page(struct page *new, struct page *old) { }
-static inline void free_page_mlock(struct page *page) { }
#endif /* CONFIG_HAVE_MLOCKED_PAGE_BIT */
@@ -284,4 +259,8 @@
unsigned long start, int len, int flags,
struct page **pages, struct vm_area_struct **vmas);
+#define ZONE_RECLAIM_NOSCAN -2
+#define ZONE_RECLAIM_FULL -1
+#define ZONE_RECLAIM_SOME 0
+#define ZONE_RECLAIM_SUCCESS 1
#endif
diff --git a/mm/kmemcheck.c b/mm/kmemcheck.c
new file mode 100644
index 0000000..fd814fd
--- /dev/null
+++ b/mm/kmemcheck.c
@@ -0,0 +1,122 @@
+#include <linux/gfp.h>
+#include <linux/mm_types.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/kmemcheck.h>
+
+void kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node)
+{
+ struct page *shadow;
+ int pages;
+ int i;
+
+ pages = 1 << order;
+
+ /*
+ * With kmemcheck enabled, we need to allocate a memory area for the
+ * shadow bits as well.
+ */
+ shadow = alloc_pages_node(node, flags | __GFP_NOTRACK, order);
+ if (!shadow) {
+ if (printk_ratelimit())
+ printk(KERN_ERR "kmemcheck: failed to allocate "
+ "shadow bitmap\n");
+ return;
+ }
+
+ for(i = 0; i < pages; ++i)
+ page[i].shadow = page_address(&shadow[i]);
+
+ /*
+ * Mark it as non-present for the MMU so that our accesses to
+ * this memory will trigger a page fault and let us analyze
+ * the memory accesses.
+ */
+ kmemcheck_hide_pages(page, pages);
+}
+
+void kmemcheck_free_shadow(struct page *page, int order)
+{
+ struct page *shadow;
+ int pages;
+ int i;
+
+ if (!kmemcheck_page_is_tracked(page))
+ return;
+
+ pages = 1 << order;
+
+ kmemcheck_show_pages(page, pages);
+
+ shadow = virt_to_page(page[0].shadow);
+
+ for(i = 0; i < pages; ++i)
+ page[i].shadow = NULL;
+
+ __free_pages(shadow, order);
+}
+
+void kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object,
+ size_t size)
+{
+ /*
+ * Has already been memset(), which initializes the shadow for us
+ * as well.
+ */
+ if (gfpflags & __GFP_ZERO)
+ return;
+
+ /* No need to initialize the shadow of a non-tracked slab. */
+ if (s->flags & SLAB_NOTRACK)
+ return;
+
+ if (!kmemcheck_enabled || gfpflags & __GFP_NOTRACK) {
+ /*
+ * Allow notracked objects to be allocated from
+ * tracked caches. Note however that these objects
+ * will still get page faults on access, they just
+ * won't ever be flagged as uninitialized. If page
+ * faults are not acceptable, the slab cache itself
+ * should be marked NOTRACK.
+ */
+ kmemcheck_mark_initialized(object, size);
+ } else if (!s->ctor) {
+ /*
+ * New objects should be marked uninitialized before
+ * they're returned to the called.
+ */
+ kmemcheck_mark_uninitialized(object, size);
+ }
+}
+
+void kmemcheck_slab_free(struct kmem_cache *s, void *object, size_t size)
+{
+ /* TODO: RCU freeing is unsupported for now; hide false positives. */
+ if (!s->ctor && !(s->flags & SLAB_DESTROY_BY_RCU))
+ kmemcheck_mark_freed(object, size);
+}
+
+void kmemcheck_pagealloc_alloc(struct page *page, unsigned int order,
+ gfp_t gfpflags)
+{
+ int pages;
+
+ if (gfpflags & (__GFP_HIGHMEM | __GFP_NOTRACK))
+ return;
+
+ pages = 1 << order;
+
+ /*
+ * NOTE: We choose to track GFP_ZERO pages too; in fact, they
+ * can become uninitialized by copying uninitialized memory
+ * into them.
+ */
+
+ /* XXX: Can use zone->node for node? */
+ kmemcheck_alloc_shadow(page, order, gfpflags, -1);
+
+ if (gfpflags & __GFP_ZERO)
+ kmemcheck_mark_initialized_pages(page, pages);
+ else
+ kmemcheck_mark_uninitialized_pages(page, pages);
+}
diff --git a/mm/madvise.c b/mm/madvise.c
index b9ce574..76eb419 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -123,8 +123,7 @@
end = vma->vm_end;
end = ((end - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
- force_page_cache_readahead(file->f_mapping,
- file, start, max_sane_readahead(end - start));
+ force_page_cache_readahead(file->f_mapping, file, start, end - start);
return 0;
}
@@ -239,12 +238,30 @@
break;
default:
- error = -EINVAL;
+ BUG();
break;
}
return error;
}
+static int
+madvise_behavior_valid(int behavior)
+{
+ switch (behavior) {
+ case MADV_DOFORK:
+ case MADV_DONTFORK:
+ case MADV_NORMAL:
+ case MADV_SEQUENTIAL:
+ case MADV_RANDOM:
+ case MADV_REMOVE:
+ case MADV_WILLNEED:
+ case MADV_DONTNEED:
+ return 1;
+
+ default:
+ return 0;
+ }
+}
/*
* The madvise(2) system call.
*
@@ -290,6 +307,9 @@
int write;
size_t len;
+ if (!madvise_behavior_valid(behavior))
+ return error;
+
write = madvise_need_mmap_write(behavior);
if (write)
down_write(¤t->mm->mmap_sem);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 78eb855..70db6e0 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -570,6 +570,17 @@
return 0;
}
+int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg)
+{
+ unsigned long active;
+ unsigned long inactive;
+
+ inactive = mem_cgroup_get_local_zonestat(memcg, LRU_INACTIVE_FILE);
+ active = mem_cgroup_get_local_zonestat(memcg, LRU_ACTIVE_FILE);
+
+ return (active > inactive);
+}
+
unsigned long mem_cgroup_zone_nr_pages(struct mem_cgroup *memcg,
struct zone *zone,
enum lru_list lru)
diff --git a/mm/memory.c b/mm/memory.c
index 4126dd1..d5d1653 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1360,6 +1360,56 @@
return i;
}
+/**
+ * get_user_pages() - pin user pages in memory
+ * @tsk: task_struct of target task
+ * @mm: mm_struct of target mm
+ * @start: starting user address
+ * @len: number of pages from start to pin
+ * @write: whether pages will be written to by the caller
+ * @force: whether to force write access even if user mapping is
+ * readonly. This will result in the page being COWed even
+ * in MAP_SHARED mappings. You do not want this.
+ * @pages: array that receives pointers to the pages pinned.
+ * Should be at least nr_pages long. Or NULL, if caller
+ * only intends to ensure the pages are faulted in.
+ * @vmas: array of pointers to vmas corresponding to each page.
+ * Or NULL if the caller does not require them.
+ *
+ * Returns number of pages pinned. This may be fewer than the number
+ * requested. If len is 0 or negative, returns 0. If no pages
+ * were pinned, returns -errno. Each page returned must be released
+ * with a put_page() call when it is finished with. vmas will only
+ * remain valid while mmap_sem is held.
+ *
+ * Must be called with mmap_sem held for read or write.
+ *
+ * get_user_pages walks a process's page tables and takes a reference to
+ * each struct page that each user address corresponds to at a given
+ * instant. That is, it takes the page that would be accessed if a user
+ * thread accesses the given user virtual address at that instant.
+ *
+ * This does not guarantee that the page exists in the user mappings when
+ * get_user_pages returns, and there may even be a completely different
+ * page there in some cases (eg. if mmapped pagecache has been invalidated
+ * and subsequently re faulted). However it does guarantee that the page
+ * won't be freed completely. And mostly callers simply care that the page
+ * contains data that was valid *at some point in time*. Typically, an IO
+ * or similar operation cannot guarantee anything stronger anyway because
+ * locks can't be held over the syscall boundary.
+ *
+ * If write=0, the page must not be written to. If the page is written to,
+ * set_page_dirty (or set_page_dirty_lock, as appropriate) must be called
+ * after the page is finished with, and before put_page is called.
+ *
+ * get_user_pages is typically used for fewer-copy IO operations, to get a
+ * handle on the memory by some means other than accesses via the user virtual
+ * addresses. The pages may be submitted for DMA to devices or accessed via
+ * their kernel linear mapping (via the kmap APIs). Care should be taken to
+ * use the correct cache flushing APIs.
+ *
+ * See also get_user_pages_fast, for performance critical applications.
+ */
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
unsigned long start, int len, int write, int force,
struct page **pages, struct vm_area_struct **vmas)
@@ -3053,22 +3103,13 @@
#endif /* __HAVE_ARCH_GATE_AREA */
-#ifdef CONFIG_HAVE_IOREMAP_PROT
-int follow_phys(struct vm_area_struct *vma,
- unsigned long address, unsigned int flags,
- unsigned long *prot, resource_size_t *phys)
+static int follow_pte(struct mm_struct *mm, unsigned long address,
+ pte_t **ptepp, spinlock_t **ptlp)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
- pte_t *ptep, pte;
- spinlock_t *ptl;
- resource_size_t phys_addr = 0;
- struct mm_struct *mm = vma->vm_mm;
- int ret = -EINVAL;
-
- if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)))
- goto out;
+ pte_t *ptep;
pgd = pgd_offset(mm, address);
if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
@@ -3086,22 +3127,71 @@
if (pmd_huge(*pmd))
goto out;
- ptep = pte_offset_map_lock(mm, pmd, address, &ptl);
+ ptep = pte_offset_map_lock(mm, pmd, address, ptlp);
if (!ptep)
goto out;
-
- pte = *ptep;
- if (!pte_present(pte))
+ if (!pte_present(*ptep))
goto unlock;
+ *ptepp = ptep;
+ return 0;
+unlock:
+ pte_unmap_unlock(ptep, *ptlp);
+out:
+ return -EINVAL;
+}
+
+/**
+ * follow_pfn - look up PFN at a user virtual address
+ * @vma: memory mapping
+ * @address: user virtual address
+ * @pfn: location to store found PFN
+ *
+ * Only IO mappings and raw PFN mappings are allowed.
+ *
+ * Returns zero and the pfn at @pfn on success, -ve otherwise.
+ */
+int follow_pfn(struct vm_area_struct *vma, unsigned long address,
+ unsigned long *pfn)
+{
+ int ret = -EINVAL;
+ spinlock_t *ptl;
+ pte_t *ptep;
+
+ if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)))
+ return ret;
+
+ ret = follow_pte(vma->vm_mm, address, &ptep, &ptl);
+ if (ret)
+ return ret;
+ *pfn = pte_pfn(*ptep);
+ pte_unmap_unlock(ptep, ptl);
+ return 0;
+}
+EXPORT_SYMBOL(follow_pfn);
+
+#ifdef CONFIG_HAVE_IOREMAP_PROT
+int follow_phys(struct vm_area_struct *vma,
+ unsigned long address, unsigned int flags,
+ unsigned long *prot, resource_size_t *phys)
+{
+ int ret = -EINVAL;
+ pte_t *ptep, pte;
+ spinlock_t *ptl;
+
+ if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)))
+ goto out;
+
+ if (follow_pte(vma->vm_mm, address, &ptep, &ptl))
+ goto out;
+ pte = *ptep;
+
if ((flags & FOLL_WRITE) && !pte_write(pte))
goto unlock;
- phys_addr = pte_pfn(pte);
- phys_addr <<= PAGE_SHIFT; /* Shift here to avoid overflow on PAE */
*prot = pgprot_val(pte_pgprot(pte));
- *phys = phys_addr;
- ret = 0;
+ *phys = (resource_size_t)pte_pfn(pte) << PAGE_SHIFT;
+ ret = 0;
unlock:
pte_unmap_unlock(ptep, ptl);
out:
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index c083cf5..e4412a6 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -422,7 +422,8 @@
zone->present_pages += onlined_pages;
zone->zone_pgdat->node_present_pages += onlined_pages;
- setup_per_zone_pages_min();
+ setup_per_zone_wmarks();
+ calculate_zone_inactive_ratio(zone);
if (onlined_pages) {
kswapd_run(zone_to_nid(zone));
node_set_state(zone_to_nid(zone), N_HIGH_MEMORY);
@@ -832,6 +833,9 @@
totalram_pages -= offlined_pages;
num_physpages -= offlined_pages;
+ setup_per_zone_wmarks();
+ calculate_zone_inactive_ratio(zone);
+
vm_total_pages = nr_free_pagecache_pages();
writeback_set_ratelimit();
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 3eb4a6f..e08e2c4 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -182,13 +182,54 @@
return 0;
}
-/* Create a new policy */
+/*
+ * mpol_set_nodemask is called after mpol_new() to set up the nodemask, if
+ * any, for the new policy. mpol_new() has already validated the nodes
+ * parameter with respect to the policy mode and flags. But, we need to
+ * handle an empty nodemask with MPOL_PREFERRED here.
+ *
+ * Must be called holding task's alloc_lock to protect task's mems_allowed
+ * and mempolicy. May also be called holding the mmap_semaphore for write.
+ */
+static int mpol_set_nodemask(struct mempolicy *pol, const nodemask_t *nodes)
+{
+ nodemask_t cpuset_context_nmask;
+ int ret;
+
+ /* if mode is MPOL_DEFAULT, pol is NULL. This is right. */
+ if (pol == NULL)
+ return 0;
+
+ VM_BUG_ON(!nodes);
+ if (pol->mode == MPOL_PREFERRED && nodes_empty(*nodes))
+ nodes = NULL; /* explicit local allocation */
+ else {
+ if (pol->flags & MPOL_F_RELATIVE_NODES)
+ mpol_relative_nodemask(&cpuset_context_nmask, nodes,
+ &cpuset_current_mems_allowed);
+ else
+ nodes_and(cpuset_context_nmask, *nodes,
+ cpuset_current_mems_allowed);
+ if (mpol_store_user_nodemask(pol))
+ pol->w.user_nodemask = *nodes;
+ else
+ pol->w.cpuset_mems_allowed =
+ cpuset_current_mems_allowed;
+ }
+
+ ret = mpol_ops[pol->mode].create(pol,
+ nodes ? &cpuset_context_nmask : NULL);
+ return ret;
+}
+
+/*
+ * This function just creates a new policy, does some check and simple
+ * initialization. You must invoke mpol_set_nodemask() to set nodes.
+ */
static struct mempolicy *mpol_new(unsigned short mode, unsigned short flags,
nodemask_t *nodes)
{
struct mempolicy *policy;
- nodemask_t cpuset_context_nmask;
- int ret;
pr_debug("setting mode %d flags %d nodes[0] %lx\n",
mode, flags, nodes ? nodes_addr(*nodes)[0] : -1);
@@ -210,7 +251,6 @@
if (((flags & MPOL_F_STATIC_NODES) ||
(flags & MPOL_F_RELATIVE_NODES)))
return ERR_PTR(-EINVAL);
- nodes = NULL; /* flag local alloc */
}
} else if (nodes_empty(*nodes))
return ERR_PTR(-EINVAL);
@@ -221,30 +261,6 @@
policy->mode = mode;
policy->flags = flags;
- if (nodes) {
- /*
- * cpuset related setup doesn't apply to local allocation
- */
- cpuset_update_task_memory_state();
- if (flags & MPOL_F_RELATIVE_NODES)
- mpol_relative_nodemask(&cpuset_context_nmask, nodes,
- &cpuset_current_mems_allowed);
- else
- nodes_and(cpuset_context_nmask, *nodes,
- cpuset_current_mems_allowed);
- if (mpol_store_user_nodemask(policy))
- policy->w.user_nodemask = *nodes;
- else
- policy->w.cpuset_mems_allowed =
- cpuset_mems_allowed(current);
- }
-
- ret = mpol_ops[mode].create(policy,
- nodes ? &cpuset_context_nmask : NULL);
- if (ret < 0) {
- kmem_cache_free(policy_cache, policy);
- return ERR_PTR(ret);
- }
return policy;
}
@@ -324,6 +340,8 @@
/*
* Wrapper for mpol_rebind_policy() that just requires task
* pointer, and updates task mempolicy.
+ *
+ * Called with task's alloc_lock held.
*/
void mpol_rebind_task(struct task_struct *tsk, const nodemask_t *new)
@@ -600,8 +618,9 @@
static long do_set_mempolicy(unsigned short mode, unsigned short flags,
nodemask_t *nodes)
{
- struct mempolicy *new;
+ struct mempolicy *new, *old;
struct mm_struct *mm = current->mm;
+ int ret;
new = mpol_new(mode, flags, nodes);
if (IS_ERR(new))
@@ -615,20 +634,33 @@
*/
if (mm)
down_write(&mm->mmap_sem);
- mpol_put(current->mempolicy);
+ task_lock(current);
+ ret = mpol_set_nodemask(new, nodes);
+ if (ret) {
+ task_unlock(current);
+ if (mm)
+ up_write(&mm->mmap_sem);
+ mpol_put(new);
+ return ret;
+ }
+ old = current->mempolicy;
current->mempolicy = new;
mpol_set_task_struct_flag();
if (new && new->mode == MPOL_INTERLEAVE &&
nodes_weight(new->v.nodes))
current->il_next = first_node(new->v.nodes);
+ task_unlock(current);
if (mm)
up_write(&mm->mmap_sem);
+ mpol_put(old);
return 0;
}
/*
* Return nodemask for policy for get_mempolicy() query
+ *
+ * Called with task's alloc_lock held
*/
static void get_policy_nodemask(struct mempolicy *p, nodemask_t *nodes)
{
@@ -674,7 +706,6 @@
struct vm_area_struct *vma = NULL;
struct mempolicy *pol = current->mempolicy;
- cpuset_update_task_memory_state();
if (flags &
~(unsigned long)(MPOL_F_NODE|MPOL_F_ADDR|MPOL_F_MEMS_ALLOWED))
return -EINVAL;
@@ -683,7 +714,9 @@
if (flags & (MPOL_F_NODE|MPOL_F_ADDR))
return -EINVAL;
*policy = 0; /* just so it's initialized */
+ task_lock(current);
*nmask = cpuset_current_mems_allowed;
+ task_unlock(current);
return 0;
}
@@ -738,8 +771,11 @@
}
err = 0;
- if (nmask)
+ if (nmask) {
+ task_lock(current);
get_policy_nodemask(pol, nmask);
+ task_unlock(current);
+ }
out:
mpol_cond_put(pol);
@@ -767,7 +803,7 @@
static struct page *new_node_page(struct page *page, unsigned long node, int **x)
{
- return alloc_pages_node(node, GFP_HIGHUSER_MOVABLE, 0);
+ return alloc_pages_exact_node(node, GFP_HIGHUSER_MOVABLE, 0);
}
/*
@@ -979,6 +1015,14 @@
return err;
}
down_write(&mm->mmap_sem);
+ task_lock(current);
+ err = mpol_set_nodemask(new, nmask);
+ task_unlock(current);
+ if (err) {
+ up_write(&mm->mmap_sem);
+ mpol_put(new);
+ return err;
+ }
vma = check_range(mm, start, end, nmask,
flags | MPOL_MF_INVERT, &pagelist);
@@ -1545,8 +1589,6 @@
struct mempolicy *pol = get_vma_policy(current, vma, addr);
struct zonelist *zl;
- cpuset_update_task_memory_state();
-
if (unlikely(pol->mode == MPOL_INTERLEAVE)) {
unsigned nid;
@@ -1593,8 +1635,6 @@
{
struct mempolicy *pol = current->mempolicy;
- if ((gfp & __GFP_WAIT) && !in_interrupt())
- cpuset_update_task_memory_state();
if (!pol || in_interrupt() || (gfp & __GFP_THISNODE))
pol = &default_policy;
@@ -1854,6 +1894,8 @@
*/
void mpol_shared_policy_init(struct shared_policy *sp, struct mempolicy *mpol)
{
+ int ret;
+
sp->root = RB_ROOT; /* empty tree == default mempolicy */
spin_lock_init(&sp->lock);
@@ -1863,9 +1905,19 @@
/* contextualize the tmpfs mount point mempolicy */
new = mpol_new(mpol->mode, mpol->flags, &mpol->w.user_nodemask);
- mpol_put(mpol); /* drop our ref on sb mpol */
- if (IS_ERR(new))
+ if (IS_ERR(new)) {
+ mpol_put(mpol); /* drop our ref on sb mpol */
return; /* no valid nodemask intersection */
+ }
+
+ task_lock(current);
+ ret = mpol_set_nodemask(new, &mpol->w.user_nodemask);
+ task_unlock(current);
+ mpol_put(mpol); /* drop our ref on sb mpol */
+ if (ret) {
+ mpol_put(new);
+ return;
+ }
/* Create pseudo-vma that contains just the policy */
memset(&pvma, 0, sizeof(struct vm_area_struct));
@@ -2086,8 +2138,19 @@
new = mpol_new(mode, mode_flags, &nodes);
if (IS_ERR(new))
err = 1;
- else if (no_context)
- new->w.user_nodemask = nodes; /* save for contextualization */
+ else {
+ int ret;
+
+ task_lock(current);
+ ret = mpol_set_nodemask(new, &nodes);
+ task_unlock(current);
+ if (ret)
+ err = 1;
+ else if (no_context) {
+ /* save for contextualization */
+ new->w.user_nodemask = nodes;
+ }
+ }
out:
/* Restore string for error message */
diff --git a/mm/migrate.c b/mm/migrate.c
index 068655d..939888f 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -802,7 +802,7 @@
*result = &pm->status;
- return alloc_pages_node(pm->node,
+ return alloc_pages_exact_node(pm->node,
GFP_HIGHUSER_MOVABLE | GFP_THISNODE, 0);
}
@@ -820,7 +820,6 @@
struct page_to_node *pp;
LIST_HEAD(pagelist);
- migrate_prep();
down_read(&mm->mmap_sem);
/*
@@ -907,6 +906,9 @@
pm = (struct page_to_node *)__get_free_page(GFP_KERNEL);
if (!pm)
goto out;
+
+ migrate_prep();
+
/*
* Store a chunk of page_to_node array in a page,
* but keep the last one as a marker
diff --git a/mm/mlock.c b/mm/mlock.c
index ac13043..45eb650 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -31,7 +31,6 @@
}
EXPORT_SYMBOL(can_do_mlock);
-#ifdef CONFIG_UNEVICTABLE_LRU
/*
* Mlocked pages are marked with PageMlocked() flag for efficient testing
* in vmscan and, possibly, the fault path; and to support semi-accurate
@@ -261,27 +260,6 @@
return retval;
}
-#else /* CONFIG_UNEVICTABLE_LRU */
-
-/*
- * Just make pages present if VM_LOCKED. No-op if unlocking.
- */
-static long __mlock_vma_pages_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end,
- int mlock)
-{
- if (mlock && (vma->vm_flags & VM_LOCKED))
- return make_pages_present(start, end);
- return 0;
-}
-
-static inline int __mlock_posix_error_return(long retval)
-{
- return 0;
-}
-
-#endif /* CONFIG_UNEVICTABLE_LRU */
-
/**
* mlock_vma_pages_range() - mlock pages in specified vma range.
* @vma - the vma containing the specfied address range
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index a7b2460..175a67a 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -58,6 +58,7 @@
unsigned long points, cpu_time, run_time;
struct mm_struct *mm;
struct task_struct *child;
+ int oom_adj;
task_lock(p);
mm = p->mm;
@@ -65,6 +66,11 @@
task_unlock(p);
return 0;
}
+ oom_adj = mm->oom_adj;
+ if (oom_adj == OOM_DISABLE) {
+ task_unlock(p);
+ return 0;
+ }
/*
* The memory size of the process is the basis for the badness.
@@ -148,15 +154,15 @@
points /= 8;
/*
- * Adjust the score by oomkilladj.
+ * Adjust the score by oom_adj.
*/
- if (p->oomkilladj) {
- if (p->oomkilladj > 0) {
+ if (oom_adj) {
+ if (oom_adj > 0) {
if (!points)
points = 1;
- points <<= p->oomkilladj;
+ points <<= oom_adj;
} else
- points >>= -(p->oomkilladj);
+ points >>= -(oom_adj);
}
#ifdef DEBUG
@@ -251,11 +257,8 @@
*ppoints = ULONG_MAX;
}
- if (p->oomkilladj == OOM_DISABLE)
- continue;
-
points = badness(p, uptime.tv_sec);
- if (points > *ppoints || !chosen) {
+ if (points > *ppoints) {
chosen = p;
*ppoints = points;
}
@@ -304,8 +307,7 @@
}
printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d %3d %s\n",
p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm,
- get_mm_rss(mm), (int)task_cpu(p), p->oomkilladj,
- p->comm);
+ get_mm_rss(mm), (int)task_cpu(p), mm->oom_adj, p->comm);
task_unlock(p);
} while_each_thread(g, p);
}
@@ -323,11 +325,8 @@
return;
}
- if (!p->mm) {
- WARN_ON(1);
- printk(KERN_WARNING "tried to kill an mm-less task!\n");
+ if (!p->mm)
return;
- }
if (verbose)
printk(KERN_ERR "Killed process %d (%s)\n",
@@ -349,28 +348,13 @@
struct mm_struct *mm;
struct task_struct *g, *q;
+ task_lock(p);
mm = p->mm;
-
- /* WARNING: mm may not be dereferenced since we did not obtain its
- * value from get_task_mm(p). This is OK since all we need to do is
- * compare mm to q->mm below.
- *
- * Furthermore, even if mm contains a non-NULL value, p->mm may
- * change to NULL at any time since we do not hold task_lock(p).
- * However, this is of no concern to us.
- */
-
- if (mm == NULL)
+ if (!mm || mm->oom_adj == OOM_DISABLE) {
+ task_unlock(p);
return 1;
-
- /*
- * Don't kill the process if any threads are set to OOM_DISABLE
- */
- do_each_thread(g, q) {
- if (q->mm == mm && q->oomkilladj == OOM_DISABLE)
- return 1;
- } while_each_thread(g, q);
-
+ }
+ task_unlock(p);
__oom_kill_task(p, 1);
/*
@@ -393,10 +377,11 @@
struct task_struct *c;
if (printk_ratelimit()) {
- printk(KERN_WARNING "%s invoked oom-killer: "
- "gfp_mask=0x%x, order=%d, oomkilladj=%d\n",
- current->comm, gfp_mask, order, current->oomkilladj);
task_lock(current);
+ printk(KERN_WARNING "%s invoked oom-killer: "
+ "gfp_mask=0x%x, order=%d, oom_adj=%d\n",
+ current->comm, gfp_mask, order,
+ current->mm ? current->mm->oom_adj : OOM_DISABLE);
cpuset_print_task_mems_allowed(current);
task_unlock(current);
dump_stack();
@@ -409,8 +394,9 @@
/*
* If the task is already exiting, don't alarm the sysadmin or kill
* its children or threads, just set TIF_MEMDIE so it can die quickly
+ * if its mm is still attached.
*/
- if (p->flags & PF_EXITING) {
+ if (p->mm && (p->flags & PF_EXITING)) {
__oom_kill_task(p, 0);
return 0;
}
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index bb553c3..7b0dcea 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -265,18 +265,19 @@
* This avoids exceeding the total dirty_limit when the floating averages
* fluctuate too quickly.
*/
-static void
-clip_bdi_dirty_limit(struct backing_dev_info *bdi, long dirty, long *pbdi_dirty)
+static void clip_bdi_dirty_limit(struct backing_dev_info *bdi,
+ unsigned long dirty, unsigned long *pbdi_dirty)
{
- long avail_dirty;
+ unsigned long avail_dirty;
- avail_dirty = dirty -
- (global_page_state(NR_FILE_DIRTY) +
+ avail_dirty = global_page_state(NR_FILE_DIRTY) +
global_page_state(NR_WRITEBACK) +
global_page_state(NR_UNSTABLE_NFS) +
- global_page_state(NR_WRITEBACK_TEMP));
+ global_page_state(NR_WRITEBACK_TEMP);
- if (avail_dirty < 0)
+ if (avail_dirty < dirty)
+ avail_dirty = dirty - avail_dirty;
+ else
avail_dirty = 0;
avail_dirty += bdi_stat(bdi, BDI_RECLAIMABLE) +
@@ -299,10 +300,10 @@
*
* dirty -= (dirty/8) * p_{t}
*/
-static void task_dirty_limit(struct task_struct *tsk, long *pdirty)
+static void task_dirty_limit(struct task_struct *tsk, unsigned long *pdirty)
{
long numerator, denominator;
- long dirty = *pdirty;
+ unsigned long dirty = *pdirty;
u64 inv = dirty >> 3;
task_dirties_fraction(tsk, &numerator, &denominator);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 17d5f53..a5f3c27 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -23,6 +23,7 @@
#include <linux/bootmem.h>
#include <linux/compiler.h>
#include <linux/kernel.h>
+#include <linux/kmemcheck.h>
#include <linux/module.h>
#include <linux/suspend.h>
#include <linux/pagevec.h>
@@ -161,17 +162,25 @@
#if MAX_NUMNODES > 1
int nr_node_ids __read_mostly = MAX_NUMNODES;
+int nr_online_nodes __read_mostly = 1;
EXPORT_SYMBOL(nr_node_ids);
+EXPORT_SYMBOL(nr_online_nodes);
#endif
int page_group_by_mobility_disabled __read_mostly;
static void set_pageblock_migratetype(struct page *page, int migratetype)
{
+
+ if (unlikely(page_group_by_mobility_disabled))
+ migratetype = MIGRATE_UNMOVABLE;
+
set_pageblock_flags_group(page, (unsigned long)migratetype,
PB_migrate, PB_migrate_end);
}
+bool oom_killer_disabled __read_mostly;
+
#ifdef CONFIG_DEBUG_VM
static int page_outside_zone_boundaries(struct zone *zone, struct page *page)
{
@@ -294,23 +303,6 @@
}
}
-#ifdef CONFIG_HUGETLBFS
-void prep_compound_gigantic_page(struct page *page, unsigned long order)
-{
- int i;
- int nr_pages = 1 << order;
- struct page *p = page + 1;
-
- set_compound_page_dtor(page, free_compound_page);
- set_compound_order(page, order);
- __SetPageHead(page);
- for (i = 1; i < nr_pages; i++, p = mem_map_next(p, page, i)) {
- __SetPageTail(p);
- p->first_page = page;
- }
-}
-#endif
-
static int destroy_compound_page(struct page *page, unsigned long order)
{
int i;
@@ -417,7 +409,7 @@
return 0;
if (PageBuddy(buddy) && page_order(buddy) == order) {
- BUG_ON(page_count(buddy) != 0);
+ VM_BUG_ON(page_count(buddy) != 0);
return 1;
}
return 0;
@@ -448,22 +440,22 @@
*/
static inline void __free_one_page(struct page *page,
- struct zone *zone, unsigned int order)
+ struct zone *zone, unsigned int order,
+ int migratetype)
{
unsigned long page_idx;
- int order_size = 1 << order;
- int migratetype = get_pageblock_migratetype(page);
if (unlikely(PageCompound(page)))
if (unlikely(destroy_compound_page(page, order)))
return;
+ VM_BUG_ON(migratetype == -1);
+
page_idx = page_to_pfn(page) & ((1 << MAX_ORDER) - 1);
- VM_BUG_ON(page_idx & (order_size - 1));
+ VM_BUG_ON(page_idx & ((1 << order) - 1));
VM_BUG_ON(bad_range(zone, page));
- __mod_zone_page_state(zone, NR_FREE_PAGES, order_size);
while (order < MAX_ORDER-1) {
unsigned long combined_idx;
struct page *buddy;
@@ -487,12 +479,27 @@
zone->free_area[order].nr_free++;
}
+#ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT
+/*
+ * free_page_mlock() -- clean up attempts to free and mlocked() page.
+ * Page should not be on lru, so no need to fix that up.
+ * free_pages_check() will verify...
+ */
+static inline void free_page_mlock(struct page *page)
+{
+ __ClearPageMlocked(page);
+ __dec_zone_page_state(page, NR_MLOCK);
+ __count_vm_event(UNEVICTABLE_MLOCKFREED);
+}
+#else
+static void free_page_mlock(struct page *page) { }
+#endif
+
static inline int free_pages_check(struct page *page)
{
- free_page_mlock(page);
if (unlikely(page_mapcount(page) |
(page->mapping != NULL) |
- (page_count(page) != 0) |
+ (atomic_read(&page->_count) != 0) |
(page->flags & PAGE_FLAGS_CHECK_AT_FREE))) {
bad_page(page);
return 1;
@@ -519,6 +526,8 @@
spin_lock(&zone->lock);
zone_clear_flag(zone, ZONE_ALL_UNRECLAIMABLE);
zone->pages_scanned = 0;
+
+ __mod_zone_page_state(zone, NR_FREE_PAGES, count << order);
while (count--) {
struct page *page;
@@ -526,17 +535,20 @@
page = list_entry(list->prev, struct page, lru);
/* have to delete it as __free_one_page list manipulates */
list_del(&page->lru);
- __free_one_page(page, zone, order);
+ __free_one_page(page, zone, order, page_private(page));
}
spin_unlock(&zone->lock);
}
-static void free_one_page(struct zone *zone, struct page *page, int order)
+static void free_one_page(struct zone *zone, struct page *page, int order,
+ int migratetype)
{
spin_lock(&zone->lock);
zone_clear_flag(zone, ZONE_ALL_UNRECLAIMABLE);
zone->pages_scanned = 0;
- __free_one_page(page, zone, order);
+
+ __mod_zone_page_state(zone, NR_FREE_PAGES, 1 << order);
+ __free_one_page(page, zone, order, migratetype);
spin_unlock(&zone->lock);
}
@@ -545,6 +557,9 @@
unsigned long flags;
int i;
int bad = 0;
+ int clearMlocked = PageMlocked(page);
+
+ kmemcheck_free_shadow(page, order);
for (i = 0 ; i < (1 << order) ; ++i)
bad += free_pages_check(page + i);
@@ -560,8 +575,11 @@
kernel_map_pages(page, 1 << order, 0);
local_irq_save(flags);
+ if (unlikely(clearMlocked))
+ free_page_mlock(page);
__count_vm_events(PGFREE, 1 << order);
- free_one_page(page_zone(page), page, order);
+ free_one_page(page_zone(page), page, order,
+ get_pageblock_migratetype(page));
local_irq_restore(flags);
}
@@ -632,7 +650,7 @@
{
if (unlikely(page_mapcount(page) |
(page->mapping != NULL) |
- (page_count(page) != 0) |
+ (atomic_read(&page->_count) != 0) |
(page->flags & PAGE_FLAGS_CHECK_AT_PREP))) {
bad_page(page);
return 1;
@@ -657,7 +675,8 @@
* Go through the free lists for the given migratetype and remove
* the smallest available page from the freelists
*/
-static struct page *__rmqueue_smallest(struct zone *zone, unsigned int order,
+static inline
+struct page *__rmqueue_smallest(struct zone *zone, unsigned int order,
int migratetype)
{
unsigned int current_order;
@@ -675,7 +694,6 @@
list_del(&page->lru);
rmv_page_order(page);
area->nr_free--;
- __mod_zone_page_state(zone, NR_FREE_PAGES, - (1UL << order));
expand(zone, page, order, current_order, area, migratetype);
return page;
}
@@ -766,8 +784,8 @@
}
/* Remove an element from the buddy allocator from the fallback list */
-static struct page *__rmqueue_fallback(struct zone *zone, int order,
- int start_migratetype)
+static inline struct page *
+__rmqueue_fallback(struct zone *zone, int order, int start_migratetype)
{
struct free_area * area;
int current_order;
@@ -815,8 +833,6 @@
/* Remove the page from the freelists */
list_del(&page->lru);
rmv_page_order(page);
- __mod_zone_page_state(zone, NR_FREE_PAGES,
- -(1UL << order));
if (current_order == pageblock_order)
set_pageblock_migratetype(page,
@@ -827,8 +843,7 @@
}
}
- /* Use MIGRATE_RESERVE rather than fail an allocation */
- return __rmqueue_smallest(zone, order, MIGRATE_RESERVE);
+ return NULL;
}
/*
@@ -840,11 +855,23 @@
{
struct page *page;
+retry_reserve:
page = __rmqueue_smallest(zone, order, migratetype);
- if (unlikely(!page))
+ if (unlikely(!page) && migratetype != MIGRATE_RESERVE) {
page = __rmqueue_fallback(zone, order, migratetype);
+ /*
+ * Use MIGRATE_RESERVE rather than fail an allocation. goto
+ * is used because __rmqueue_smallest is an inline function
+ * and we want just one call site
+ */
+ if (!page) {
+ migratetype = MIGRATE_RESERVE;
+ goto retry_reserve;
+ }
+ }
+
return page;
}
@@ -878,6 +905,7 @@
set_page_private(page, migratetype);
list = &page->lru;
}
+ __mod_zone_page_state(zone, NR_FREE_PAGES, -(i << order));
spin_unlock(&zone->lock);
return i;
}
@@ -993,6 +1021,9 @@
struct zone *zone = page_zone(page);
struct per_cpu_pages *pcp;
unsigned long flags;
+ int clearMlocked = PageMlocked(page);
+
+ kmemcheck_free_shadow(page, 0);
if (PageAnon(page))
page->mapping = NULL;
@@ -1007,13 +1038,16 @@
kernel_map_pages(page, 1, 0);
pcp = &zone_pcp(zone, get_cpu())->pcp;
+ set_page_private(page, get_pageblock_migratetype(page));
local_irq_save(flags);
+ if (unlikely(clearMlocked))
+ free_page_mlock(page);
__count_vm_event(PGFREE);
+
if (cold)
list_add_tail(&page->lru, &pcp->list);
else
list_add(&page->lru, &pcp->list);
- set_page_private(page, get_pageblock_migratetype(page));
pcp->count++;
if (pcp->count >= pcp->high) {
free_pages_bulk(zone, pcp->batch, &pcp->list, 0);
@@ -1047,6 +1081,16 @@
VM_BUG_ON(PageCompound(page));
VM_BUG_ON(!page_count(page));
+
+#ifdef CONFIG_KMEMCHECK
+ /*
+ * Split shadow pages too, because free(page[0]) would
+ * otherwise free the whole shadow.
+ */
+ if (kmemcheck_page_is_tracked(page))
+ split_page(virt_to_page(page[0].shadow), order);
+#endif
+
for (i = 1; i < (1 << order); i++)
set_page_refcounted(page + i);
}
@@ -1056,14 +1100,15 @@
* we cheat by calling it from here, in the order > 0 path. Saves a branch
* or two.
*/
-static struct page *buffered_rmqueue(struct zone *preferred_zone,
- struct zone *zone, int order, gfp_t gfp_flags)
+static inline
+struct page *buffered_rmqueue(struct zone *preferred_zone,
+ struct zone *zone, int order, gfp_t gfp_flags,
+ int migratetype)
{
unsigned long flags;
struct page *page;
int cold = !!(gfp_flags & __GFP_COLD);
int cpu;
- int migratetype = allocflags_to_migratetype(gfp_flags);
again:
cpu = get_cpu();
@@ -1100,8 +1145,22 @@
list_del(&page->lru);
pcp->count--;
} else {
+ if (unlikely(gfp_flags & __GFP_NOFAIL)) {
+ /*
+ * __GFP_NOFAIL is not to be used in new code.
+ *
+ * All __GFP_NOFAIL callers should be fixed so that they
+ * properly detect and handle allocation failures.
+ *
+ * We most definitely don't want callers attempting to
+ * allocate greater than single-page units with
+ * __GFP_NOFAIL.
+ */
+ WARN_ON_ONCE(order > 0);
+ }
spin_lock_irqsave(&zone->lock, flags);
page = __rmqueue(zone, order, migratetype);
+ __mod_zone_page_state(zone, NR_FREE_PAGES, -(1 << order));
spin_unlock(&zone->lock);
if (!page)
goto failed;
@@ -1123,10 +1182,15 @@
return NULL;
}
-#define ALLOC_NO_WATERMARKS 0x01 /* don't check watermarks at all */
-#define ALLOC_WMARK_MIN 0x02 /* use pages_min watermark */
-#define ALLOC_WMARK_LOW 0x04 /* use pages_low watermark */
-#define ALLOC_WMARK_HIGH 0x08 /* use pages_high watermark */
+/* The ALLOC_WMARK bits are used as an index to zone->watermark */
+#define ALLOC_WMARK_MIN WMARK_MIN
+#define ALLOC_WMARK_LOW WMARK_LOW
+#define ALLOC_WMARK_HIGH WMARK_HIGH
+#define ALLOC_NO_WATERMARKS 0x04 /* don't check watermarks at all */
+
+/* Mask to get the watermark bits */
+#define ALLOC_WMARK_MASK (ALLOC_NO_WATERMARKS-1)
+
#define ALLOC_HARDER 0x10 /* try to alloc harder */
#define ALLOC_HIGH 0x20 /* __GFP_HIGH set */
#define ALLOC_CPUSET 0x40 /* check for correct cpuset */
@@ -1384,23 +1448,18 @@
*/
static struct page *
get_page_from_freelist(gfp_t gfp_mask, nodemask_t *nodemask, unsigned int order,
- struct zonelist *zonelist, int high_zoneidx, int alloc_flags)
+ struct zonelist *zonelist, int high_zoneidx, int alloc_flags,
+ struct zone *preferred_zone, int migratetype)
{
struct zoneref *z;
struct page *page = NULL;
int classzone_idx;
- struct zone *zone, *preferred_zone;
+ struct zone *zone;
nodemask_t *allowednodes = NULL;/* zonelist_cache approximation */
int zlc_active = 0; /* set if using zonelist_cache */
int did_zlc_setup = 0; /* just call zlc_setup() one time */
- (void)first_zones_zonelist(zonelist, high_zoneidx, nodemask,
- &preferred_zone);
- if (!preferred_zone)
- return NULL;
-
classzone_idx = zone_idx(preferred_zone);
-
zonelist_scan:
/*
* Scan zonelist, looking for a zone with enough free.
@@ -1415,31 +1474,49 @@
!cpuset_zone_allowed_softwall(zone, gfp_mask))
goto try_next_zone;
+ BUILD_BUG_ON(ALLOC_NO_WATERMARKS < NR_WMARK);
if (!(alloc_flags & ALLOC_NO_WATERMARKS)) {
unsigned long mark;
- if (alloc_flags & ALLOC_WMARK_MIN)
- mark = zone->pages_min;
- else if (alloc_flags & ALLOC_WMARK_LOW)
- mark = zone->pages_low;
- else
- mark = zone->pages_high;
- if (!zone_watermark_ok(zone, order, mark,
- classzone_idx, alloc_flags)) {
- if (!zone_reclaim_mode ||
- !zone_reclaim(zone, gfp_mask, order))
+ int ret;
+
+ mark = zone->watermark[alloc_flags & ALLOC_WMARK_MASK];
+ if (zone_watermark_ok(zone, order, mark,
+ classzone_idx, alloc_flags))
+ goto try_this_zone;
+
+ if (zone_reclaim_mode == 0)
+ goto this_zone_full;
+
+ ret = zone_reclaim(zone, gfp_mask, order);
+ switch (ret) {
+ case ZONE_RECLAIM_NOSCAN:
+ /* did not scan */
+ goto try_next_zone;
+ case ZONE_RECLAIM_FULL:
+ /* scanned but unreclaimable */
+ goto this_zone_full;
+ default:
+ /* did we reclaim enough */
+ if (!zone_watermark_ok(zone, order, mark,
+ classzone_idx, alloc_flags))
goto this_zone_full;
}
}
- page = buffered_rmqueue(preferred_zone, zone, order, gfp_mask);
+try_this_zone:
+ page = buffered_rmqueue(preferred_zone, zone, order,
+ gfp_mask, migratetype);
if (page)
break;
this_zone_full:
if (NUMA_BUILD)
zlc_mark_zone_full(zonelist, z);
try_next_zone:
- if (NUMA_BUILD && !did_zlc_setup) {
- /* we do zlc_setup after the first zone is tried */
+ if (NUMA_BUILD && !did_zlc_setup && nr_online_nodes > 1) {
+ /*
+ * we do zlc_setup after the first zone is tried but only
+ * if there are multiple nodes make it worthwhile
+ */
allowednodes = zlc_setup(zonelist, alloc_flags);
zlc_active = 1;
did_zlc_setup = 1;
@@ -1454,47 +1531,217 @@
return page;
}
-/*
- * This is the 'heart' of the zoned buddy allocator.
- */
-struct page *
-__alloc_pages_internal(gfp_t gfp_mask, unsigned int order,
- struct zonelist *zonelist, nodemask_t *nodemask)
+static inline int
+should_alloc_retry(gfp_t gfp_mask, unsigned int order,
+ unsigned long pages_reclaimed)
{
- const gfp_t wait = gfp_mask & __GFP_WAIT;
- enum zone_type high_zoneidx = gfp_zone(gfp_mask);
- struct zoneref *z;
- struct zone *zone;
+ /* Do not loop if specifically requested */
+ if (gfp_mask & __GFP_NORETRY)
+ return 0;
+
+ /*
+ * In this implementation, order <= PAGE_ALLOC_COSTLY_ORDER
+ * means __GFP_NOFAIL, but that may not be true in other
+ * implementations.
+ */
+ if (order <= PAGE_ALLOC_COSTLY_ORDER)
+ return 1;
+
+ /*
+ * For order > PAGE_ALLOC_COSTLY_ORDER, if __GFP_REPEAT is
+ * specified, then we retry until we no longer reclaim any pages
+ * (above), or we've reclaimed an order of pages at least as
+ * large as the allocation's order. In both cases, if the
+ * allocation still fails, we stop retrying.
+ */
+ if (gfp_mask & __GFP_REPEAT && pages_reclaimed < (1 << order))
+ return 1;
+
+ /*
+ * Don't let big-order allocations loop unless the caller
+ * explicitly requests that.
+ */
+ if (gfp_mask & __GFP_NOFAIL)
+ return 1;
+
+ return 0;
+}
+
+static inline struct page *
+__alloc_pages_may_oom(gfp_t gfp_mask, unsigned int order,
+ struct zonelist *zonelist, enum zone_type high_zoneidx,
+ nodemask_t *nodemask, struct zone *preferred_zone,
+ int migratetype)
+{
struct page *page;
- struct reclaim_state reclaim_state;
- struct task_struct *p = current;
- int do_retry;
- int alloc_flags;
- unsigned long did_some_progress;
- unsigned long pages_reclaimed = 0;
- lockdep_trace_alloc(gfp_mask);
-
- might_sleep_if(wait);
-
- if (should_fail_alloc_page(gfp_mask, order))
- return NULL;
-
-restart:
- z = zonelist->_zonerefs; /* the list of zones suitable for gfp_mask */
-
- if (unlikely(!z->zone)) {
- /*
- * Happens if we have an empty zonelist as a result of
- * GFP_THISNODE being used on a memoryless node
- */
+ /* Acquire the OOM killer lock for the zones in zonelist */
+ if (!try_set_zone_oom(zonelist, gfp_mask)) {
+ schedule_timeout_uninterruptible(1);
return NULL;
}
- page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, nodemask, order,
- zonelist, high_zoneidx, ALLOC_WMARK_LOW|ALLOC_CPUSET);
+ /*
+ * Go through the zonelist yet one more time, keep very high watermark
+ * here, this is only to catch a parallel oom killing, we must fail if
+ * we're still under heavy pressure.
+ */
+ page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, nodemask,
+ order, zonelist, high_zoneidx,
+ ALLOC_WMARK_HIGH|ALLOC_CPUSET,
+ preferred_zone, migratetype);
if (page)
- goto got_pg;
+ goto out;
+
+ /* The OOM killer will not help higher order allocs */
+ if (order > PAGE_ALLOC_COSTLY_ORDER && !(gfp_mask & __GFP_NOFAIL))
+ goto out;
+
+ /* Exhausted what can be done so it's blamo time */
+ out_of_memory(zonelist, gfp_mask, order);
+
+out:
+ clear_zonelist_oom(zonelist, gfp_mask);
+ return page;
+}
+
+/* The really slow allocator path where we enter direct reclaim */
+static inline struct page *
+__alloc_pages_direct_reclaim(gfp_t gfp_mask, unsigned int order,
+ struct zonelist *zonelist, enum zone_type high_zoneidx,
+ nodemask_t *nodemask, int alloc_flags, struct zone *preferred_zone,
+ int migratetype, unsigned long *did_some_progress)
+{
+ struct page *page = NULL;
+ struct reclaim_state reclaim_state;
+ struct task_struct *p = current;
+
+ cond_resched();
+
+ /* We now go into synchronous reclaim */
+ cpuset_memory_pressure_bump();
+
+ /*
+ * The task's cpuset might have expanded its set of allowable nodes
+ */
+ p->flags |= PF_MEMALLOC;
+ lockdep_set_current_reclaim_state(gfp_mask);
+ reclaim_state.reclaimed_slab = 0;
+ p->reclaim_state = &reclaim_state;
+
+ *did_some_progress = try_to_free_pages(zonelist, order, gfp_mask, nodemask);
+
+ p->reclaim_state = NULL;
+ lockdep_clear_current_reclaim_state();
+ p->flags &= ~PF_MEMALLOC;
+
+ cond_resched();
+
+ if (order != 0)
+ drain_all_pages();
+
+ if (likely(*did_some_progress))
+ page = get_page_from_freelist(gfp_mask, nodemask, order,
+ zonelist, high_zoneidx,
+ alloc_flags, preferred_zone,
+ migratetype);
+ return page;
+}
+
+/*
+ * This is called in the allocator slow-path if the allocation request is of
+ * sufficient urgency to ignore watermarks and take other desperate measures
+ */
+static inline struct page *
+__alloc_pages_high_priority(gfp_t gfp_mask, unsigned int order,
+ struct zonelist *zonelist, enum zone_type high_zoneidx,
+ nodemask_t *nodemask, struct zone *preferred_zone,
+ int migratetype)
+{
+ struct page *page;
+
+ do {
+ page = get_page_from_freelist(gfp_mask, nodemask, order,
+ zonelist, high_zoneidx, ALLOC_NO_WATERMARKS,
+ preferred_zone, migratetype);
+
+ if (!page && gfp_mask & __GFP_NOFAIL)
+ congestion_wait(WRITE, HZ/50);
+ } while (!page && (gfp_mask & __GFP_NOFAIL));
+
+ return page;
+}
+
+static inline
+void wake_all_kswapd(unsigned int order, struct zonelist *zonelist,
+ enum zone_type high_zoneidx)
+{
+ struct zoneref *z;
+ struct zone *zone;
+
+ for_each_zone_zonelist(zone, z, zonelist, high_zoneidx)
+ wakeup_kswapd(zone, order);
+}
+
+static inline int
+gfp_to_alloc_flags(gfp_t gfp_mask)
+{
+ struct task_struct *p = current;
+ int alloc_flags = ALLOC_WMARK_MIN | ALLOC_CPUSET;
+ const gfp_t wait = gfp_mask & __GFP_WAIT;
+
+ /* __GFP_HIGH is assumed to be the same as ALLOC_HIGH to save a branch. */
+ BUILD_BUG_ON(__GFP_HIGH != ALLOC_HIGH);
+
+ /*
+ * The caller may dip into page reserves a bit more if the caller
+ * cannot run direct reclaim, or if the caller has realtime scheduling
+ * policy or is asking for __GFP_HIGH memory. GFP_ATOMIC requests will
+ * set both ALLOC_HARDER (!wait) and ALLOC_HIGH (__GFP_HIGH).
+ */
+ alloc_flags |= (gfp_mask & __GFP_HIGH);
+
+ if (!wait) {
+ alloc_flags |= ALLOC_HARDER;
+ /*
+ * Ignore cpuset if GFP_ATOMIC (!wait) rather than fail alloc.
+ * See also cpuset_zone_allowed() comment in kernel/cpuset.c.
+ */
+ alloc_flags &= ~ALLOC_CPUSET;
+ } else if (unlikely(rt_task(p)))
+ alloc_flags |= ALLOC_HARDER;
+
+ if (likely(!(gfp_mask & __GFP_NOMEMALLOC))) {
+ if (!in_interrupt() &&
+ ((p->flags & PF_MEMALLOC) ||
+ unlikely(test_thread_flag(TIF_MEMDIE))))
+ alloc_flags |= ALLOC_NO_WATERMARKS;
+ }
+
+ return alloc_flags;
+}
+
+static inline struct page *
+__alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
+ struct zonelist *zonelist, enum zone_type high_zoneidx,
+ nodemask_t *nodemask, struct zone *preferred_zone,
+ int migratetype)
+{
+ const gfp_t wait = gfp_mask & __GFP_WAIT;
+ struct page *page = NULL;
+ int alloc_flags;
+ unsigned long pages_reclaimed = 0;
+ unsigned long did_some_progress;
+ struct task_struct *p = current;
+
+ /*
+ * In the slowpath, we sanity check order to avoid ever trying to
+ * reclaim >= MAX_ORDER areas which will never succeed. Callers may
+ * be using allocators in order of preference for an area that is
+ * too large.
+ */
+ if (WARN_ON_ONCE(order >= MAX_ORDER))
+ return NULL;
/*
* GFP_THISNODE (meaning __GFP_THISNODE, __GFP_NORETRY and
@@ -1507,154 +1754,83 @@
if (NUMA_BUILD && (gfp_mask & GFP_THISNODE) == GFP_THISNODE)
goto nopage;
- for_each_zone_zonelist(zone, z, zonelist, high_zoneidx)
- wakeup_kswapd(zone, order);
+ wake_all_kswapd(order, zonelist, high_zoneidx);
/*
* OK, we're below the kswapd watermark and have kicked background
* reclaim. Now things get more complex, so set up alloc_flags according
* to how we want to proceed.
- *
- * The caller may dip into page reserves a bit more if the caller
- * cannot run direct reclaim, or if the caller has realtime scheduling
- * policy or is asking for __GFP_HIGH memory. GFP_ATOMIC requests will
- * set both ALLOC_HARDER (!wait) and ALLOC_HIGH (__GFP_HIGH).
*/
- alloc_flags = ALLOC_WMARK_MIN;
- if ((unlikely(rt_task(p)) && !in_interrupt()) || !wait)
- alloc_flags |= ALLOC_HARDER;
- if (gfp_mask & __GFP_HIGH)
- alloc_flags |= ALLOC_HIGH;
- if (wait)
- alloc_flags |= ALLOC_CPUSET;
+ alloc_flags = gfp_to_alloc_flags(gfp_mask);
- /*
- * Go through the zonelist again. Let __GFP_HIGH and allocations
- * coming from realtime tasks go deeper into reserves.
- *
- * This is the last chance, in general, before the goto nopage.
- * Ignore cpuset if GFP_ATOMIC (!wait) rather than fail alloc.
- * See also cpuset_zone_allowed() comment in kernel/cpuset.c.
- */
+restart:
+ /* This is the last chance, in general, before the goto nopage. */
page = get_page_from_freelist(gfp_mask, nodemask, order, zonelist,
- high_zoneidx, alloc_flags);
+ high_zoneidx, alloc_flags & ~ALLOC_NO_WATERMARKS,
+ preferred_zone, migratetype);
if (page)
goto got_pg;
- /* This allocation should allow future memory freeing. */
-
rebalance:
- if (((p->flags & PF_MEMALLOC) || unlikely(test_thread_flag(TIF_MEMDIE)))
- && !in_interrupt()) {
- if (!(gfp_mask & __GFP_NOMEMALLOC)) {
-nofail_alloc:
- /* go through the zonelist yet again, ignoring mins */
- page = get_page_from_freelist(gfp_mask, nodemask, order,
- zonelist, high_zoneidx, ALLOC_NO_WATERMARKS);
- if (page)
- goto got_pg;
- if (gfp_mask & __GFP_NOFAIL) {
- congestion_wait(WRITE, HZ/50);
- goto nofail_alloc;
- }
- }
- goto nopage;
+ /* Allocate without watermarks if the context allows */
+ if (alloc_flags & ALLOC_NO_WATERMARKS) {
+ page = __alloc_pages_high_priority(gfp_mask, order,
+ zonelist, high_zoneidx, nodemask,
+ preferred_zone, migratetype);
+ if (page)
+ goto got_pg;
}
/* Atomic allocations - we can't balance anything */
if (!wait)
goto nopage;
- cond_resched();
+ /* Avoid recursion of direct reclaim */
+ if (p->flags & PF_MEMALLOC)
+ goto nopage;
- /* We now go into synchronous reclaim */
- cpuset_memory_pressure_bump();
+ /* Try direct reclaim and then allocating */
+ page = __alloc_pages_direct_reclaim(gfp_mask, order,
+ zonelist, high_zoneidx,
+ nodemask,
+ alloc_flags, preferred_zone,
+ migratetype, &did_some_progress);
+ if (page)
+ goto got_pg;
+
/*
- * The task's cpuset might have expanded its set of allowable nodes
+ * If we failed to make any progress reclaiming, then we are
+ * running out of options and have to consider going OOM
*/
- cpuset_update_task_memory_state();
- p->flags |= PF_MEMALLOC;
+ if (!did_some_progress) {
+ if ((gfp_mask & __GFP_FS) && !(gfp_mask & __GFP_NORETRY)) {
+ if (oom_killer_disabled)
+ goto nopage;
+ page = __alloc_pages_may_oom(gfp_mask, order,
+ zonelist, high_zoneidx,
+ nodemask, preferred_zone,
+ migratetype);
+ if (page)
+ goto got_pg;
- lockdep_set_current_reclaim_state(gfp_mask);
- reclaim_state.reclaimed_slab = 0;
- p->reclaim_state = &reclaim_state;
+ /*
+ * The OOM killer does not trigger for high-order
+ * ~__GFP_NOFAIL allocations so if no progress is being
+ * made, there are no other options and retrying is
+ * unlikely to help.
+ */
+ if (order > PAGE_ALLOC_COSTLY_ORDER &&
+ !(gfp_mask & __GFP_NOFAIL))
+ goto nopage;
- did_some_progress = try_to_free_pages(zonelist, order,
- gfp_mask, nodemask);
-
- p->reclaim_state = NULL;
- lockdep_clear_current_reclaim_state();
- p->flags &= ~PF_MEMALLOC;
-
- cond_resched();
-
- if (order != 0)
- drain_all_pages();
-
- if (likely(did_some_progress)) {
- page = get_page_from_freelist(gfp_mask, nodemask, order,
- zonelist, high_zoneidx, alloc_flags);
- if (page)
- goto got_pg;
- } else if ((gfp_mask & __GFP_FS) && !(gfp_mask & __GFP_NORETRY)) {
- if (!try_set_zone_oom(zonelist, gfp_mask)) {
- schedule_timeout_uninterruptible(1);
goto restart;
}
-
- /*
- * Go through the zonelist yet one more time, keep
- * very high watermark here, this is only to catch
- * a parallel oom killing, we must fail if we're still
- * under heavy pressure.
- */
- page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, nodemask,
- order, zonelist, high_zoneidx,
- ALLOC_WMARK_HIGH|ALLOC_CPUSET);
- if (page) {
- clear_zonelist_oom(zonelist, gfp_mask);
- goto got_pg;
- }
-
- /* The OOM killer will not help higher order allocs so fail */
- if (order > PAGE_ALLOC_COSTLY_ORDER) {
- clear_zonelist_oom(zonelist, gfp_mask);
- goto nopage;
- }
-
- out_of_memory(zonelist, gfp_mask, order);
- clear_zonelist_oom(zonelist, gfp_mask);
- goto restart;
}
- /*
- * Don't let big-order allocations loop unless the caller explicitly
- * requests that. Wait for some write requests to complete then retry.
- *
- * In this implementation, order <= PAGE_ALLOC_COSTLY_ORDER
- * means __GFP_NOFAIL, but that may not be true in other
- * implementations.
- *
- * For order > PAGE_ALLOC_COSTLY_ORDER, if __GFP_REPEAT is
- * specified, then we retry until we no longer reclaim any pages
- * (above), or we've reclaimed an order of pages at least as
- * large as the allocation's order. In both cases, if the
- * allocation still fails, we stop retrying.
- */
+ /* Check if we should retry the allocation */
pages_reclaimed += did_some_progress;
- do_retry = 0;
- if (!(gfp_mask & __GFP_NORETRY)) {
- if (order <= PAGE_ALLOC_COSTLY_ORDER) {
- do_retry = 1;
- } else {
- if (gfp_mask & __GFP_REPEAT &&
- pages_reclaimed < (1 << order))
- do_retry = 1;
- }
- if (gfp_mask & __GFP_NOFAIL)
- do_retry = 1;
- }
- if (do_retry) {
+ if (should_alloc_retry(gfp_mask, order, pages_reclaimed)) {
+ /* Wait for some write requests to complete then retry */
congestion_wait(WRITE, HZ/50);
goto rebalance;
}
@@ -1667,10 +1843,58 @@
dump_stack();
show_mem();
}
+ return page;
got_pg:
+ if (kmemcheck_enabled)
+ kmemcheck_pagealloc_alloc(page, order, gfp_mask);
+ return page;
+
+}
+
+/*
+ * This is the 'heart' of the zoned buddy allocator.
+ */
+struct page *
+__alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
+ struct zonelist *zonelist, nodemask_t *nodemask)
+{
+ enum zone_type high_zoneidx = gfp_zone(gfp_mask);
+ struct zone *preferred_zone;
+ struct page *page;
+ int migratetype = allocflags_to_migratetype(gfp_mask);
+
+ lockdep_trace_alloc(gfp_mask);
+
+ might_sleep_if(gfp_mask & __GFP_WAIT);
+
+ if (should_fail_alloc_page(gfp_mask, order))
+ return NULL;
+
+ /*
+ * Check the zones suitable for the gfp_mask contain at least one
+ * valid zone. It's possible to have an empty zonelist as a result
+ * of GFP_THISNODE and a memoryless node
+ */
+ if (unlikely(!zonelist->_zonerefs->zone))
+ return NULL;
+
+ /* The preferred zone is used for statistics later */
+ first_zones_zonelist(zonelist, high_zoneidx, nodemask, &preferred_zone);
+ if (!preferred_zone)
+ return NULL;
+
+ /* First allocation attempt */
+ page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, nodemask, order,
+ zonelist, high_zoneidx, ALLOC_WMARK_LOW|ALLOC_CPUSET,
+ preferred_zone, migratetype);
+ if (unlikely(!page))
+ page = __alloc_pages_slowpath(gfp_mask, order,
+ zonelist, high_zoneidx, nodemask,
+ preferred_zone, migratetype);
+
return page;
}
-EXPORT_SYMBOL(__alloc_pages_internal);
+EXPORT_SYMBOL(__alloc_pages_nodemask);
/*
* Common helper functions.
@@ -1799,7 +2023,7 @@
for_each_zone_zonelist(zone, z, zonelist, offset) {
unsigned long size = zone->present_pages;
- unsigned long high = zone->pages_high;
+ unsigned long high = high_wmark_pages(zone);
if (size > high)
sum += size - high;
}
@@ -1891,19 +2115,14 @@
printk("Active_anon:%lu active_file:%lu inactive_anon:%lu\n"
" inactive_file:%lu"
-//TODO: check/adjust line lengths
-#ifdef CONFIG_UNEVICTABLE_LRU
" unevictable:%lu"
-#endif
" dirty:%lu writeback:%lu unstable:%lu\n"
" free:%lu slab:%lu mapped:%lu pagetables:%lu bounce:%lu\n",
global_page_state(NR_ACTIVE_ANON),
global_page_state(NR_ACTIVE_FILE),
global_page_state(NR_INACTIVE_ANON),
global_page_state(NR_INACTIVE_FILE),
-#ifdef CONFIG_UNEVICTABLE_LRU
global_page_state(NR_UNEVICTABLE),
-#endif
global_page_state(NR_FILE_DIRTY),
global_page_state(NR_WRITEBACK),
global_page_state(NR_UNSTABLE_NFS),
@@ -1927,25 +2146,21 @@
" inactive_anon:%lukB"
" active_file:%lukB"
" inactive_file:%lukB"
-#ifdef CONFIG_UNEVICTABLE_LRU
" unevictable:%lukB"
-#endif
" present:%lukB"
" pages_scanned:%lu"
" all_unreclaimable? %s"
"\n",
zone->name,
K(zone_page_state(zone, NR_FREE_PAGES)),
- K(zone->pages_min),
- K(zone->pages_low),
- K(zone->pages_high),
+ K(min_wmark_pages(zone)),
+ K(low_wmark_pages(zone)),
+ K(high_wmark_pages(zone)),
K(zone_page_state(zone, NR_ACTIVE_ANON)),
K(zone_page_state(zone, NR_INACTIVE_ANON)),
K(zone_page_state(zone, NR_ACTIVE_FILE)),
K(zone_page_state(zone, NR_INACTIVE_FILE)),
-#ifdef CONFIG_UNEVICTABLE_LRU
K(zone_page_state(zone, NR_UNEVICTABLE)),
-#endif
K(zone->present_pages),
zone->pages_scanned,
(zone_is_all_unreclaimable(zone) ? "yes" : "no")
@@ -2103,7 +2318,7 @@
}
-#define MAX_NODE_LOAD (num_online_nodes())
+#define MAX_NODE_LOAD (nr_online_nodes)
static int node_load[MAX_NUMNODES];
/**
@@ -2312,7 +2527,7 @@
/* NUMA-aware ordering of nodes */
local_node = pgdat->node_id;
- load = num_online_nodes();
+ load = nr_online_nodes;
prev_node = local_node;
nodes_clear(used_mask);
@@ -2463,7 +2678,7 @@
printk("Built %i zonelists in %s order, mobility grouping %s. "
"Total pages: %ld\n",
- num_online_nodes(),
+ nr_online_nodes,
zonelist_order_name[current_zonelist_order],
page_group_by_mobility_disabled ? "off" : "on",
vm_total_pages);
@@ -2542,8 +2757,8 @@
/*
* Mark a number of pageblocks as MIGRATE_RESERVE. The number
- * of blocks reserved is based on zone->pages_min. The memory within the
- * reserve will tend to store contiguous free pages. Setting min_free_kbytes
+ * of blocks reserved is based on min_wmark_pages(zone). The memory within
+ * the reserve will tend to store contiguous free pages. Setting min_free_kbytes
* higher will lead to a bigger reserve which will get freed as contiguous
* blocks as reclaim kicks in
*/
@@ -2556,7 +2771,7 @@
/* Get the start pfn, end pfn and the number of blocks to reserve */
start_pfn = zone->zone_start_pfn;
end_pfn = start_pfn + zone->spanned_pages;
- reserve = roundup(zone->pages_min, pageblock_nr_pages) >>
+ reserve = roundup(min_wmark_pages(zone), pageblock_nr_pages) >>
pageblock_order;
for (pfn = start_pfn; pfn < end_pfn; pfn += pageblock_nr_pages) {
@@ -3488,7 +3703,7 @@
zone_pcp_init(zone);
for_each_lru(l) {
INIT_LIST_HEAD(&zone->lru[l].list);
- zone->lru[l].nr_scan = 0;
+ zone->lru[l].nr_saved_scan = 0;
}
zone->reclaim_stat.recent_rotated[0] = 0;
zone->reclaim_stat.recent_rotated[1] = 0;
@@ -4025,6 +4240,11 @@
early_node_map[i].start_pfn,
early_node_map[i].end_pfn);
+ /*
+ * find_zone_movable_pfns_for_nodes/early_calculate_totalpages init
+ * that node_mask, clear it at first
+ */
+ nodes_clear(node_states[N_HIGH_MEMORY]);
/* Initialise every node */
mminit_verify_pageflags_layout();
setup_nr_node_ids();
@@ -4159,8 +4379,8 @@
max = zone->lowmem_reserve[j];
}
- /* we treat pages_high as reserved pages. */
- max += zone->pages_high;
+ /* we treat the high watermark as reserved pages. */
+ max += high_wmark_pages(zone);
if (max > zone->present_pages)
max = zone->present_pages;
@@ -4210,12 +4430,13 @@
}
/**
- * setup_per_zone_pages_min - called when min_free_kbytes changes.
+ * setup_per_zone_wmarks - called when min_free_kbytes changes
+ * or when memory is hot-{added|removed}
*
- * Ensures that the pages_{min,low,high} values for each zone are set correctly
- * with respect to min_free_kbytes.
+ * Ensures that the watermark[min,low,high] values for each zone are set
+ * correctly with respect to min_free_kbytes.
*/
-void setup_per_zone_pages_min(void)
+void setup_per_zone_wmarks(void)
{
unsigned long pages_min = min_free_kbytes >> (PAGE_SHIFT - 10);
unsigned long lowmem_pages = 0;
@@ -4240,7 +4461,7 @@
* need highmem pages, so cap pages_min to a small
* value here.
*
- * The (pages_high-pages_low) and (pages_low-pages_min)
+ * The WMARK_HIGH-WMARK_LOW and (WMARK_LOW-WMARK_MIN)
* deltas controls asynch page reclaim, and so should
* not be capped for highmem.
*/
@@ -4251,17 +4472,17 @@
min_pages = SWAP_CLUSTER_MAX;
if (min_pages > 128)
min_pages = 128;
- zone->pages_min = min_pages;
+ zone->watermark[WMARK_MIN] = min_pages;
} else {
/*
* If it's a lowmem zone, reserve a number of pages
* proportionate to the zone's size.
*/
- zone->pages_min = tmp;
+ zone->watermark[WMARK_MIN] = tmp;
}
- zone->pages_low = zone->pages_min + (tmp >> 2);
- zone->pages_high = zone->pages_min + (tmp >> 1);
+ zone->watermark[WMARK_LOW] = min_wmark_pages(zone) + (tmp >> 2);
+ zone->watermark[WMARK_HIGH] = min_wmark_pages(zone) + (tmp >> 1);
setup_zone_migrate_reserve(zone);
spin_unlock_irqrestore(&zone->lock, flags);
}
@@ -4271,8 +4492,6 @@
}
/**
- * setup_per_zone_inactive_ratio - called when min_free_kbytes changes.
- *
* The inactive anon list should be small enough that the VM never has to
* do too much work, but large enough that each inactive page has a chance
* to be referenced again before it is swapped out.
@@ -4293,21 +4512,26 @@
* 1TB 101 10GB
* 10TB 320 32GB
*/
-static void setup_per_zone_inactive_ratio(void)
+void calculate_zone_inactive_ratio(struct zone *zone)
+{
+ unsigned int gb, ratio;
+
+ /* Zone size in gigabytes */
+ gb = zone->present_pages >> (30 - PAGE_SHIFT);
+ if (gb)
+ ratio = int_sqrt(10 * gb);
+ else
+ ratio = 1;
+
+ zone->inactive_ratio = ratio;
+}
+
+static void __init setup_per_zone_inactive_ratio(void)
{
struct zone *zone;
- for_each_zone(zone) {
- unsigned int gb, ratio;
-
- /* Zone size in gigabytes */
- gb = zone->present_pages >> (30 - PAGE_SHIFT);
- ratio = int_sqrt(10 * gb);
- if (!ratio)
- ratio = 1;
-
- zone->inactive_ratio = ratio;
- }
+ for_each_zone(zone)
+ calculate_zone_inactive_ratio(zone);
}
/*
@@ -4334,7 +4558,7 @@
* 8192MB: 11584k
* 16384MB: 16384k
*/
-static int __init init_per_zone_pages_min(void)
+static int __init init_per_zone_wmark_min(void)
{
unsigned long lowmem_kbytes;
@@ -4345,12 +4569,12 @@
min_free_kbytes = 128;
if (min_free_kbytes > 65536)
min_free_kbytes = 65536;
- setup_per_zone_pages_min();
+ setup_per_zone_wmarks();
setup_per_zone_lowmem_reserve();
setup_per_zone_inactive_ratio();
return 0;
}
-module_init(init_per_zone_pages_min)
+module_init(init_per_zone_wmark_min)
/*
* min_free_kbytes_sysctl_handler - just a wrapper around proc_dointvec() so
@@ -4362,7 +4586,7 @@
{
proc_dointvec(table, write, file, buffer, length, ppos);
if (write)
- setup_per_zone_pages_min();
+ setup_per_zone_wmarks();
return 0;
}
@@ -4406,7 +4630,7 @@
* whenever sysctl_lowmem_reserve_ratio changes.
*
* The reserve ratio obviously has absolutely no relation with the
- * pages_min watermarks. The lowmem reserve ratio can only make sense
+ * minimum watermarks. The lowmem reserve ratio can only make sense
* if in function of the boot time zone sizes.
*/
int lowmem_reserve_ratio_sysctl_handler(ctl_table *table, int write,
@@ -4513,23 +4737,13 @@
else if (hashdist)
table = __vmalloc(size, GFP_ATOMIC, PAGE_KERNEL);
else {
- unsigned long order = get_order(size);
- table = (void*) __get_free_pages(GFP_ATOMIC, order);
/*
* If bucketsize is not a power-of-two, we may free
- * some pages at the end of hash table.
+ * some pages at the end of hash table which
+ * alloc_pages_exact() automatically does
*/
- if (table) {
- unsigned long alloc_end = (unsigned long)table +
- (PAGE_SIZE << order);
- unsigned long used = (unsigned long)table +
- PAGE_ALIGN(size);
- split_page(virt_to_page(table), order);
- while (used < alloc_end) {
- free_page(used);
- used += PAGE_SIZE;
- }
- }
+ if (get_order(size) < MAX_ORDER)
+ table = alloc_pages_exact(size, GFP_ATOMIC);
}
} while (!table && size > PAGE_SIZE && --log2qty);
diff --git a/mm/page_io.c b/mm/page_io.c
index 3023c47..c6f3e50 100644
--- a/mm/page_io.c
+++ b/mm/page_io.c
@@ -120,7 +120,7 @@
return ret;
}
-int swap_readpage(struct file *file, struct page *page)
+int swap_readpage(struct page *page)
{
struct bio *bio;
int ret = 0;
diff --git a/mm/readahead.c b/mm/readahead.c
index 133b6d5..aa1aa23 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -133,15 +133,12 @@
}
/*
- * do_page_cache_readahead actually reads a chunk of disk. It allocates all
+ * __do_page_cache_readahead() actually reads a chunk of disk. It allocates all
* the pages first, then submits them all for I/O. This avoids the very bad
* behaviour which would occur if page allocations are causing VM writeback.
* We really don't want to intermingle reads and writes like that.
*
* Returns the number of pages requested, or the maximum amount of I/O allowed.
- *
- * do_page_cache_readahead() returns -1 if it encountered request queue
- * congestion.
*/
static int
__do_page_cache_readahead(struct address_space *mapping, struct file *filp,
@@ -210,6 +207,7 @@
if (unlikely(!mapping->a_ops->readpage && !mapping->a_ops->readpages))
return -EINVAL;
+ nr_to_read = max_sane_readahead(nr_to_read);
while (nr_to_read) {
int err;
@@ -231,22 +229,6 @@
}
/*
- * This version skips the IO if the queue is read-congested, and will tell the
- * block layer to abandon the readahead if request allocation would block.
- *
- * force_page_cache_readahead() will ignore queue congestion and will block on
- * request queues.
- */
-int do_page_cache_readahead(struct address_space *mapping, struct file *filp,
- pgoff_t offset, unsigned long nr_to_read)
-{
- if (bdi_read_congested(mapping->backing_dev_info))
- return -1;
-
- return __do_page_cache_readahead(mapping, filp, offset, nr_to_read, 0);
-}
-
-/*
* Given a desired number of PAGE_CACHE_SIZE readahead pages, return a
* sensible upper limit.
*/
@@ -259,7 +241,7 @@
/*
* Submit IO for the read-ahead request in file_ra_state.
*/
-static unsigned long ra_submit(struct file_ra_state *ra,
+unsigned long ra_submit(struct file_ra_state *ra,
struct address_space *mapping, struct file *filp)
{
int actual;
@@ -348,6 +330,59 @@
*/
/*
+ * Count contiguously cached pages from @offset-1 to @offset-@max,
+ * this count is a conservative estimation of
+ * - length of the sequential read sequence, or
+ * - thrashing threshold in memory tight systems
+ */
+static pgoff_t count_history_pages(struct address_space *mapping,
+ struct file_ra_state *ra,
+ pgoff_t offset, unsigned long max)
+{
+ pgoff_t head;
+
+ rcu_read_lock();
+ head = radix_tree_prev_hole(&mapping->page_tree, offset - 1, max);
+ rcu_read_unlock();
+
+ return offset - 1 - head;
+}
+
+/*
+ * page cache context based read-ahead
+ */
+static int try_context_readahead(struct address_space *mapping,
+ struct file_ra_state *ra,
+ pgoff_t offset,
+ unsigned long req_size,
+ unsigned long max)
+{
+ pgoff_t size;
+
+ size = count_history_pages(mapping, ra, offset, max);
+
+ /*
+ * no history pages:
+ * it could be a random read
+ */
+ if (!size)
+ return 0;
+
+ /*
+ * starts from beginning of file:
+ * it is a strong indication of long-run stream (or whole-file-read)
+ */
+ if (size >= offset)
+ size *= 2;
+
+ ra->start = offset;
+ ra->size = get_init_ra_size(size + req_size, max);
+ ra->async_size = ra->size;
+
+ return 1;
+}
+
+/*
* A minimal readahead algorithm for trivial sequential/random reads.
*/
static unsigned long
@@ -356,34 +391,26 @@
bool hit_readahead_marker, pgoff_t offset,
unsigned long req_size)
{
- int max = ra->ra_pages; /* max readahead pages */
- pgoff_t prev_offset;
- int sequential;
+ unsigned long max = max_sane_readahead(ra->ra_pages);
+
+ /*
+ * start of file
+ */
+ if (!offset)
+ goto initial_readahead;
/*
* It's the expected callback offset, assume sequential access.
* Ramp up sizes, and push forward the readahead window.
*/
- if (offset && (offset == (ra->start + ra->size - ra->async_size) ||
- offset == (ra->start + ra->size))) {
+ if ((offset == (ra->start + ra->size - ra->async_size) ||
+ offset == (ra->start + ra->size))) {
ra->start += ra->size;
ra->size = get_next_ra_size(ra, max);
ra->async_size = ra->size;
goto readit;
}
- prev_offset = ra->prev_pos >> PAGE_CACHE_SHIFT;
- sequential = offset - prev_offset <= 1UL || req_size > max;
-
- /*
- * Standalone, small read.
- * Read as is, and do not pollute the readahead state.
- */
- if (!hit_readahead_marker && !sequential) {
- return __do_page_cache_readahead(mapping, filp,
- offset, req_size, 0);
- }
-
/*
* Hit a marked page without valid readahead state.
* E.g. interleaved reads.
@@ -394,7 +421,7 @@
pgoff_t start;
rcu_read_lock();
- start = radix_tree_next_hole(&mapping->page_tree, offset,max+1);
+ start = radix_tree_next_hole(&mapping->page_tree, offset+1,max);
rcu_read_unlock();
if (!start || start - offset > max)
@@ -402,23 +429,53 @@
ra->start = start;
ra->size = start - offset; /* old async_size */
+ ra->size += req_size;
ra->size = get_next_ra_size(ra, max);
ra->async_size = ra->size;
goto readit;
}
/*
- * It may be one of
- * - first read on start of file
- * - sequential cache miss
- * - oversize random read
- * Start readahead for it.
+ * oversize read
*/
+ if (req_size > max)
+ goto initial_readahead;
+
+ /*
+ * sequential cache miss
+ */
+ if (offset - (ra->prev_pos >> PAGE_CACHE_SHIFT) <= 1UL)
+ goto initial_readahead;
+
+ /*
+ * Query the page cache and look for the traces(cached history pages)
+ * that a sequential stream would leave behind.
+ */
+ if (try_context_readahead(mapping, ra, offset, req_size, max))
+ goto readit;
+
+ /*
+ * standalone, small random read
+ * Read as is, and do not pollute the readahead state.
+ */
+ return __do_page_cache_readahead(mapping, filp, offset, req_size, 0);
+
+initial_readahead:
ra->start = offset;
ra->size = get_init_ra_size(req_size, max);
ra->async_size = ra->size > req_size ? ra->size - req_size : ra->size;
readit:
+ /*
+ * Will this read hit the readahead marker made by itself?
+ * If so, trigger the readahead marker hit now, and merge
+ * the resulted next readahead window into the current one.
+ */
+ if (offset == ra->start && ra->size == ra->async_size) {
+ ra->async_size = get_next_ra_size(ra, max);
+ ra->size += ra->async_size;
+ }
+
return ra_submit(ra, mapping, filp);
}
diff --git a/mm/rmap.c b/mm/rmap.c
index 23122af..c9ccc1a 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -333,7 +333,9 @@
* repeatedly from either page_referenced_anon or page_referenced_file.
*/
static int page_referenced_one(struct page *page,
- struct vm_area_struct *vma, unsigned int *mapcount)
+ struct vm_area_struct *vma,
+ unsigned int *mapcount,
+ unsigned long *vm_flags)
{
struct mm_struct *mm = vma->vm_mm;
unsigned long address;
@@ -381,11 +383,14 @@
(*mapcount)--;
pte_unmap_unlock(pte, ptl);
out:
+ if (referenced)
+ *vm_flags |= vma->vm_flags;
return referenced;
}
static int page_referenced_anon(struct page *page,
- struct mem_cgroup *mem_cont)
+ struct mem_cgroup *mem_cont,
+ unsigned long *vm_flags)
{
unsigned int mapcount;
struct anon_vma *anon_vma;
@@ -405,7 +410,8 @@
*/
if (mem_cont && !mm_match_cgroup(vma->vm_mm, mem_cont))
continue;
- referenced += page_referenced_one(page, vma, &mapcount);
+ referenced += page_referenced_one(page, vma,
+ &mapcount, vm_flags);
if (!mapcount)
break;
}
@@ -418,6 +424,7 @@
* page_referenced_file - referenced check for object-based rmap
* @page: the page we're checking references on.
* @mem_cont: target memory controller
+ * @vm_flags: collect encountered vma->vm_flags who actually referenced the page
*
* For an object-based mapped page, find all the places it is mapped and
* check/clear the referenced flag. This is done by following the page->mapping
@@ -427,7 +434,8 @@
* This function is only called from page_referenced for object-based pages.
*/
static int page_referenced_file(struct page *page,
- struct mem_cgroup *mem_cont)
+ struct mem_cgroup *mem_cont,
+ unsigned long *vm_flags)
{
unsigned int mapcount;
struct address_space *mapping = page->mapping;
@@ -467,7 +475,8 @@
*/
if (mem_cont && !mm_match_cgroup(vma->vm_mm, mem_cont))
continue;
- referenced += page_referenced_one(page, vma, &mapcount);
+ referenced += page_referenced_one(page, vma,
+ &mapcount, vm_flags);
if (!mapcount)
break;
}
@@ -481,29 +490,35 @@
* @page: the page to test
* @is_locked: caller holds lock on the page
* @mem_cont: target memory controller
+ * @vm_flags: collect encountered vma->vm_flags who actually referenced the page
*
* Quick test_and_clear_referenced for all mappings to a page,
* returns the number of ptes which referenced the page.
*/
-int page_referenced(struct page *page, int is_locked,
- struct mem_cgroup *mem_cont)
+int page_referenced(struct page *page,
+ int is_locked,
+ struct mem_cgroup *mem_cont,
+ unsigned long *vm_flags)
{
int referenced = 0;
if (TestClearPageReferenced(page))
referenced++;
+ *vm_flags = 0;
if (page_mapped(page) && page->mapping) {
if (PageAnon(page))
- referenced += page_referenced_anon(page, mem_cont);
+ referenced += page_referenced_anon(page, mem_cont,
+ vm_flags);
else if (is_locked)
- referenced += page_referenced_file(page, mem_cont);
+ referenced += page_referenced_file(page, mem_cont,
+ vm_flags);
else if (!trylock_page(page))
referenced++;
else {
if (page->mapping)
- referenced +=
- page_referenced_file(page, mem_cont);
+ referenced += page_referenced_file(page,
+ mem_cont, vm_flags);
unlock_page(page);
}
}
@@ -1202,7 +1217,6 @@
return ret;
}
-#ifdef CONFIG_UNEVICTABLE_LRU
/**
* try_to_munlock - try to munlock a page
* @page: the page to be munlocked
@@ -1226,4 +1240,4 @@
else
return try_to_unmap_file(page, 1, 0);
}
-#endif
+
diff --git a/mm/shmem.c b/mm/shmem.c
index 0132fbd..e89d7ec 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1097,7 +1097,7 @@
shmem_swp_unmap(entry);
unlock:
spin_unlock(&info->lock);
- swap_free(swap);
+ swapcache_free(swap, NULL);
redirty:
set_page_dirty(page);
if (wbc->for_reclaim)
@@ -2612,7 +2612,7 @@
* @size: size to be set for the file
* @flags: VM_NORESERVE suppresses pre-accounting of the entire object size
*/
-struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
+struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags)
{
int error;
struct file *file;
diff --git a/mm/slab.c b/mm/slab.c
index 18e3164..f257d4d 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -114,6 +114,7 @@
#include <linux/rtmutex.h>
#include <linux/reciprocal_div.h>
#include <linux/debugobjects.h>
+#include <linux/kmemcheck.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
@@ -179,13 +180,13 @@
SLAB_STORE_USER | \
SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD | \
- SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE)
+ SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE | SLAB_NOTRACK)
#else
# define CREATE_MASK (SLAB_HWCACHE_ALIGN | \
SLAB_CACHE_DMA | \
SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD | \
- SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE)
+ SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE | SLAB_NOTRACK)
#endif
/*
@@ -380,87 +381,6 @@
MAKE_LIST((cachep), (&(ptr)->slabs_free), slabs_free, nodeid); \
} while (0)
-/*
- * struct kmem_cache
- *
- * manages a cache.
- */
-
-struct kmem_cache {
-/* 1) per-cpu data, touched during every alloc/free */
- struct array_cache *array[NR_CPUS];
-/* 2) Cache tunables. Protected by cache_chain_mutex */
- unsigned int batchcount;
- unsigned int limit;
- unsigned int shared;
-
- unsigned int buffer_size;
- u32 reciprocal_buffer_size;
-/* 3) touched by every alloc & free from the backend */
-
- unsigned int flags; /* constant flags */
- unsigned int num; /* # of objs per slab */
-
-/* 4) cache_grow/shrink */
- /* order of pgs per slab (2^n) */
- unsigned int gfporder;
-
- /* force GFP flags, e.g. GFP_DMA */
- gfp_t gfpflags;
-
- size_t colour; /* cache colouring range */
- unsigned int colour_off; /* colour offset */
- struct kmem_cache *slabp_cache;
- unsigned int slab_size;
- unsigned int dflags; /* dynamic flags */
-
- /* constructor func */
- void (*ctor)(void *obj);
-
-/* 5) cache creation/removal */
- const char *name;
- struct list_head next;
-
-/* 6) statistics */
-#if STATS
- unsigned long num_active;
- unsigned long num_allocations;
- unsigned long high_mark;
- unsigned long grown;
- unsigned long reaped;
- unsigned long errors;
- unsigned long max_freeable;
- unsigned long node_allocs;
- unsigned long node_frees;
- unsigned long node_overflow;
- atomic_t allochit;
- atomic_t allocmiss;
- atomic_t freehit;
- atomic_t freemiss;
-#endif
-#if DEBUG
- /*
- * If debugging is enabled, then the allocator can add additional
- * fields and/or padding to every object. buffer_size contains the total
- * object size including these internal fields, the following two
- * variables contain the offset to the user object and its size.
- */
- int obj_offset;
- int obj_size;
-#endif
- /*
- * We put nodelists[] at the end of kmem_cache, because we want to size
- * this array to nr_node_ids slots instead of MAX_NUMNODES
- * (see kmem_cache_init())
- * We still use [MAX_NUMNODES] and not [1] or [0] because cache_cache
- * is statically defined, so we reserve the max number of nodes.
- */
- struct kmem_list3 *nodelists[MAX_NUMNODES];
- /*
- * Do not add fields after nodelists[]
- */
-};
-
#define CFLGS_OFF_SLAB (0x80000000UL)
#define OFF_SLAB(x) ((x)->flags & CFLGS_OFF_SLAB)
@@ -898,7 +818,6 @@
*/
static int use_alien_caches __read_mostly = 1;
-static int numa_platform __read_mostly = 1;
static int __init noaliencache_setup(char *s)
{
use_alien_caches = 0;
@@ -1457,10 +1376,8 @@
int order;
int node;
- if (num_possible_nodes() == 1) {
+ if (num_possible_nodes() == 1)
use_alien_caches = 0;
- numa_platform = 0;
- }
for (i = 0; i < NUM_INIT_LISTS; i++) {
kmem_list3_init(&initkmem_list3[i]);
@@ -1707,7 +1624,7 @@
if (cachep->flags & SLAB_RECLAIM_ACCOUNT)
flags |= __GFP_RECLAIMABLE;
- page = alloc_pages_node(nodeid, flags, cachep->gfporder);
+ page = alloc_pages_exact_node(nodeid, flags | __GFP_NOTRACK, cachep->gfporder);
if (!page)
return NULL;
@@ -1720,6 +1637,16 @@
NR_SLAB_UNRECLAIMABLE, nr_pages);
for (i = 0; i < nr_pages; i++)
__SetPageSlab(page + i);
+
+ if (kmemcheck_enabled && !(cachep->flags & SLAB_NOTRACK)) {
+ kmemcheck_alloc_shadow(page, cachep->gfporder, flags, nodeid);
+
+ if (cachep->ctor)
+ kmemcheck_mark_uninitialized_pages(page, nr_pages);
+ else
+ kmemcheck_mark_unallocated_pages(page, nr_pages);
+ }
+
return page_address(page);
}
@@ -1732,6 +1659,8 @@
struct page *page = virt_to_page(addr);
const unsigned long nr_freed = i;
+ kmemcheck_free_shadow(page, cachep->gfporder);
+
if (cachep->flags & SLAB_RECLAIM_ACCOUNT)
sub_zone_page_state(page_zone(page),
NR_SLAB_RECLAIMABLE, nr_freed);
@@ -3261,7 +3190,7 @@
if (local_flags & __GFP_WAIT)
local_irq_enable();
kmem_flagcheck(cache, flags);
- obj = kmem_getpages(cache, local_flags, -1);
+ obj = kmem_getpages(cache, local_flags, numa_node_id());
if (local_flags & __GFP_WAIT)
local_irq_disable();
if (obj) {
@@ -3407,6 +3336,9 @@
kmemleak_alloc_recursive(ptr, obj_size(cachep), 1, cachep->flags,
flags);
+ if (likely(ptr))
+ kmemcheck_slab_alloc(cachep, flags, ptr, obj_size(cachep));
+
if (unlikely((flags & __GFP_ZERO) && ptr))
memset(ptr, 0, obj_size(cachep));
@@ -3467,6 +3399,9 @@
flags);
prefetchw(objp);
+ if (likely(objp))
+ kmemcheck_slab_alloc(cachep, flags, objp, obj_size(cachep));
+
if (unlikely((flags & __GFP_ZERO) && objp))
memset(objp, 0, obj_size(cachep));
@@ -3583,6 +3518,8 @@
kmemleak_free_recursive(objp, cachep->flags);
objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
+ kmemcheck_slab_free(cachep, objp, obj_size(cachep));
+
/*
* Skip calling cache_free_alien() when the platform is not numa.
* This will avoid cache misses that happen while accessing slabp (which
@@ -3590,7 +3527,7 @@
* variable to skip the call, which is mostly likely to be present in
* the cache.
*/
- if (numa_platform && cache_free_alien(cachep, objp))
+ if (nr_online_nodes > 1 && cache_free_alien(cachep, objp))
return;
if (likely(ac->avail < ac->limit)) {
diff --git a/mm/slob.c b/mm/slob.c
index 12f2614..64f6db1 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -46,7 +46,7 @@
* NUMA support in SLOB is fairly simplistic, pushing most of the real
* logic down to the page allocator, and simply doing the node accounting
* on the upper levels. In the event that a node id is explicitly
- * provided, alloc_pages_node() with the specified node id is used
+ * provided, alloc_pages_exact_node() with the specified node id is used
* instead. The common case (or when the node id isn't explicitly provided)
* will default to the current node, as per numa_node_id().
*
@@ -244,7 +244,7 @@
#ifdef CONFIG_NUMA
if (node != -1)
- page = alloc_pages_node(node, gfp, order);
+ page = alloc_pages_exact_node(node, gfp, order);
else
#endif
page = alloc_pages(gfp, order);
diff --git a/mm/slub.c b/mm/slub.c
index 30354bf..2701419 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -18,6 +18,7 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/kmemtrace.h>
+#include <linux/kmemcheck.h>
#include <linux/cpu.h>
#include <linux/cpuset.h>
#include <linux/kmemleak.h>
@@ -147,7 +148,7 @@
SLAB_TRACE | SLAB_DESTROY_BY_RCU | SLAB_NOLEAKTRACE)
#define SLUB_MERGE_SAME (SLAB_DEBUG_FREE | SLAB_RECLAIM_ACCOUNT | \
- SLAB_CACHE_DMA)
+ SLAB_CACHE_DMA | SLAB_NOTRACK)
#ifndef ARCH_KMALLOC_MINALIGN
#define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long)
@@ -1071,6 +1072,8 @@
{
int order = oo_order(oo);
+ flags |= __GFP_NOTRACK;
+
if (node == -1)
return alloc_pages(flags, order);
else
@@ -1098,6 +1101,24 @@
stat(get_cpu_slab(s, raw_smp_processor_id()), ORDER_FALLBACK);
}
+
+ if (kmemcheck_enabled
+ && !(s->flags & (SLAB_NOTRACK | DEBUG_DEFAULT_FLAGS)))
+ {
+ int pages = 1 << oo_order(oo);
+
+ kmemcheck_alloc_shadow(page, oo_order(oo), flags, node);
+
+ /*
+ * Objects from caches that have a constructor don't get
+ * cleared when they're allocated, so we need to do it here.
+ */
+ if (s->ctor)
+ kmemcheck_mark_uninitialized_pages(page, pages);
+ else
+ kmemcheck_mark_unallocated_pages(page, pages);
+ }
+
page->objects = oo_objects(oo);
mod_zone_page_state(page_zone(page),
(s->flags & SLAB_RECLAIM_ACCOUNT) ?
@@ -1171,6 +1192,8 @@
__ClearPageSlubDebug(page);
}
+ kmemcheck_free_shadow(page, compound_order(page));
+
mod_zone_page_state(page_zone(page),
(s->flags & SLAB_RECLAIM_ACCOUNT) ?
NR_SLAB_RECLAIMABLE : NR_SLAB_UNRECLAIMABLE,
@@ -1626,7 +1649,9 @@
if (unlikely((gfpflags & __GFP_ZERO) && object))
memset(object, 0, objsize);
+ kmemcheck_slab_alloc(s, gfpflags, object, c->objsize);
kmemleak_alloc_recursive(object, objsize, 1, s->flags, gfpflags);
+
return object;
}
@@ -1759,6 +1784,7 @@
kmemleak_free_recursive(x, s->flags);
local_irq_save(flags);
c = get_cpu_slab(s, smp_processor_id());
+ kmemcheck_slab_free(s, object, c->objsize);
debug_check_no_locks_freed(object, c->objsize);
if (!(s->flags & SLAB_DEBUG_OBJECTS))
debug_check_no_obj_freed(object, c->objsize);
@@ -2633,7 +2659,8 @@
if (!s || !text || !kmem_cache_open(s, flags, text,
realsize, ARCH_KMALLOC_MINALIGN,
- SLAB_CACHE_DMA|__SYSFS_ADD_DEFERRED, NULL)) {
+ SLAB_CACHE_DMA|SLAB_NOTRACK|__SYSFS_ADD_DEFERRED,
+ NULL)) {
kfree(s);
kfree(text);
goto unlock_out;
@@ -2727,9 +2754,10 @@
static void *kmalloc_large_node(size_t size, gfp_t flags, int node)
{
- struct page *page = alloc_pages_node(node, flags | __GFP_COMP,
- get_order(size));
+ struct page *page;
+ flags |= __GFP_COMP | __GFP_NOTRACK;
+ page = alloc_pages_node(node, flags, get_order(size));
if (page)
return page_address(page);
else
@@ -3737,7 +3765,7 @@
to_cpumask(l->cpus));
}
- if (num_online_nodes() > 1 && !nodes_empty(l->nodes) &&
+ if (nr_online_nodes > 1 && !nodes_empty(l->nodes) &&
len < PAGE_SIZE - 60) {
len += sprintf(buf + len, " nodes=");
len += nodelist_scnprintf(buf + len, PAGE_SIZE - len - 50,
@@ -4412,6 +4440,8 @@
*p++ = 'a';
if (s->flags & SLAB_DEBUG_FREE)
*p++ = 'F';
+ if (!(s->flags & SLAB_NOTRACK))
+ *p++ = 't';
if (p != name + 1)
*p++ = '-';
p += sprintf(p, "%07d", s->size);
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 1416e7e..42cd38e 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -124,7 +124,6 @@
/**
* add_to_swap - allocate swap space for a page
* @page: page we want to move to swap
- * @gfp_mask: memory allocation flags
*
* Allocate swap space for the page and add the page to the
* swap cache. Caller needs to hold the page lock.
@@ -162,11 +161,11 @@
return 1;
case -EEXIST:
/* Raced with "speculative" read_swap_cache_async */
- swap_free(entry);
+ swapcache_free(entry, NULL);
continue;
default:
/* -ENOMEM radix-tree allocation failure */
- swap_free(entry);
+ swapcache_free(entry, NULL);
return 0;
}
}
@@ -188,8 +187,7 @@
__delete_from_swap_cache(page);
spin_unlock_irq(&swapper_space.tree_lock);
- mem_cgroup_uncharge_swapcache(page, entry);
- swap_free(entry);
+ swapcache_free(entry, page);
page_cache_release(page);
}
@@ -293,7 +291,10 @@
/*
* Swap entry may have been freed since our caller observed it.
*/
- if (!swap_duplicate(entry))
+ err = swapcache_prepare(entry);
+ if (err == -EEXIST) /* seems racy */
+ continue;
+ if (err) /* swp entry is obsolete ? */
break;
/*
@@ -312,12 +313,12 @@
* Initiate read into locked page and return.
*/
lru_cache_add_anon(new_page);
- swap_readpage(NULL, new_page);
+ swap_readpage(new_page);
return new_page;
}
ClearPageSwapBacked(new_page);
__clear_page_locked(new_page);
- swap_free(entry);
+ swapcache_free(entry, NULL);
} while (err != -ENOMEM);
if (new_page)
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 312fafe..28faa01 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -53,6 +53,59 @@
static DEFINE_MUTEX(swapon_mutex);
+/* For reference count accounting in swap_map */
+/* enum for swap_map[] handling. internal use only */
+enum {
+ SWAP_MAP = 0, /* ops for reference from swap users */
+ SWAP_CACHE, /* ops for reference from swap cache */
+};
+
+static inline int swap_count(unsigned short ent)
+{
+ return ent & SWAP_COUNT_MASK;
+}
+
+static inline bool swap_has_cache(unsigned short ent)
+{
+ return !!(ent & SWAP_HAS_CACHE);
+}
+
+static inline unsigned short encode_swapmap(int count, bool has_cache)
+{
+ unsigned short ret = count;
+
+ if (has_cache)
+ return SWAP_HAS_CACHE | ret;
+ return ret;
+}
+
+/* returnes 1 if swap entry is freed */
+static int
+__try_to_reclaim_swap(struct swap_info_struct *si, unsigned long offset)
+{
+ int type = si - swap_info;
+ swp_entry_t entry = swp_entry(type, offset);
+ struct page *page;
+ int ret = 0;
+
+ page = find_get_page(&swapper_space, entry.val);
+ if (!page)
+ return 0;
+ /*
+ * This function is called from scan_swap_map() and it's called
+ * by vmscan.c at reclaiming pages. So, we hold a lock on a page, here.
+ * We have to use trylock for avoiding deadlock. This is a special
+ * case and you should use try_to_free_swap() with explicit lock_page()
+ * in usual operations.
+ */
+ if (trylock_page(page)) {
+ ret = try_to_free_swap(page);
+ unlock_page(page);
+ }
+ page_cache_release(page);
+ return ret;
+}
+
/*
* We need this because the bdev->unplug_fn can sleep and we cannot
* hold swap_lock while calling the unplug_fn. And swap_lock
@@ -167,7 +220,8 @@
#define SWAPFILE_CLUSTER 256
#define LATENCY_LIMIT 256
-static inline unsigned long scan_swap_map(struct swap_info_struct *si)
+static inline unsigned long scan_swap_map(struct swap_info_struct *si,
+ int cache)
{
unsigned long offset;
unsigned long scan_base;
@@ -273,6 +327,19 @@
goto no_page;
if (offset > si->highest_bit)
scan_base = offset = si->lowest_bit;
+
+ /* reuse swap entry of cache-only swap if not busy. */
+ if (vm_swap_full() && si->swap_map[offset] == SWAP_HAS_CACHE) {
+ int swap_was_freed;
+ spin_unlock(&swap_lock);
+ swap_was_freed = __try_to_reclaim_swap(si, offset);
+ spin_lock(&swap_lock);
+ /* entry was freed successfully, try to use this again */
+ if (swap_was_freed)
+ goto checks;
+ goto scan; /* check next one */
+ }
+
if (si->swap_map[offset])
goto scan;
@@ -285,7 +352,10 @@
si->lowest_bit = si->max;
si->highest_bit = 0;
}
- si->swap_map[offset] = 1;
+ if (cache == SWAP_CACHE) /* at usual swap-out via vmscan.c */
+ si->swap_map[offset] = encode_swapmap(0, true);
+ else /* at suspend */
+ si->swap_map[offset] = encode_swapmap(1, false);
si->cluster_next = offset + 1;
si->flags -= SWP_SCANNING;
@@ -351,6 +421,10 @@
spin_lock(&swap_lock);
goto checks;
}
+ if (vm_swap_full() && si->swap_map[offset] == SWAP_HAS_CACHE) {
+ spin_lock(&swap_lock);
+ goto checks;
+ }
if (unlikely(--latency_ration < 0)) {
cond_resched();
latency_ration = LATENCY_LIMIT;
@@ -362,6 +436,10 @@
spin_lock(&swap_lock);
goto checks;
}
+ if (vm_swap_full() && si->swap_map[offset] == SWAP_HAS_CACHE) {
+ spin_lock(&swap_lock);
+ goto checks;
+ }
if (unlikely(--latency_ration < 0)) {
cond_resched();
latency_ration = LATENCY_LIMIT;
@@ -401,7 +479,8 @@
continue;
swap_list.next = next;
- offset = scan_swap_map(si);
+ /* This is called for allocating swap entry for cache */
+ offset = scan_swap_map(si, SWAP_CACHE);
if (offset) {
spin_unlock(&swap_lock);
return swp_entry(type, offset);
@@ -415,6 +494,7 @@
return (swp_entry_t) {0};
}
+/* The only caller of this function is now susupend routine */
swp_entry_t get_swap_page_of_type(int type)
{
struct swap_info_struct *si;
@@ -424,7 +504,8 @@
si = swap_info + type;
if (si->flags & SWP_WRITEOK) {
nr_swap_pages--;
- offset = scan_swap_map(si);
+ /* This is called for allocating swap entry, not cache */
+ offset = scan_swap_map(si, SWAP_MAP);
if (offset) {
spin_unlock(&swap_lock);
return swp_entry(type, offset);
@@ -471,25 +552,38 @@
return NULL;
}
-static int swap_entry_free(struct swap_info_struct *p, swp_entry_t ent)
+static int swap_entry_free(struct swap_info_struct *p,
+ swp_entry_t ent, int cache)
{
unsigned long offset = swp_offset(ent);
- int count = p->swap_map[offset];
+ int count = swap_count(p->swap_map[offset]);
+ bool has_cache;
- if (count < SWAP_MAP_MAX) {
- count--;
- p->swap_map[offset] = count;
- if (!count) {
- if (offset < p->lowest_bit)
- p->lowest_bit = offset;
- if (offset > p->highest_bit)
- p->highest_bit = offset;
- if (p->prio > swap_info[swap_list.next].prio)
- swap_list.next = p - swap_info;
- nr_swap_pages++;
- p->inuse_pages--;
- mem_cgroup_uncharge_swap(ent);
+ has_cache = swap_has_cache(p->swap_map[offset]);
+
+ if (cache == SWAP_MAP) { /* dropping usage count of swap */
+ if (count < SWAP_MAP_MAX) {
+ count--;
+ p->swap_map[offset] = encode_swapmap(count, has_cache);
}
+ } else { /* dropping swap cache flag */
+ VM_BUG_ON(!has_cache);
+ p->swap_map[offset] = encode_swapmap(count, false);
+
+ }
+ /* return code. */
+ count = p->swap_map[offset];
+ /* free if no reference */
+ if (!count) {
+ if (offset < p->lowest_bit)
+ p->lowest_bit = offset;
+ if (offset > p->highest_bit)
+ p->highest_bit = offset;
+ if (p->prio > swap_info[swap_list.next].prio)
+ swap_list.next = p - swap_info;
+ nr_swap_pages++;
+ p->inuse_pages--;
+ mem_cgroup_uncharge_swap(ent);
}
return count;
}
@@ -504,12 +598,29 @@
p = swap_info_get(entry);
if (p) {
- swap_entry_free(p, entry);
+ swap_entry_free(p, entry, SWAP_MAP);
spin_unlock(&swap_lock);
}
}
/*
+ * Called after dropping swapcache to decrease refcnt to swap entries.
+ */
+void swapcache_free(swp_entry_t entry, struct page *page)
+{
+ struct swap_info_struct *p;
+
+ if (page)
+ mem_cgroup_uncharge_swapcache(page, entry);
+ p = swap_info_get(entry);
+ if (p) {
+ swap_entry_free(p, entry, SWAP_CACHE);
+ spin_unlock(&swap_lock);
+ }
+ return;
+}
+
+/*
* How many references to page are currently swapped out?
*/
static inline int page_swapcount(struct page *page)
@@ -521,8 +632,7 @@
entry.val = page_private(page);
p = swap_info_get(entry);
if (p) {
- /* Subtract the 1 for the swap cache itself */
- count = p->swap_map[swp_offset(entry)] - 1;
+ count = swap_count(p->swap_map[swp_offset(entry)]);
spin_unlock(&swap_lock);
}
return count;
@@ -584,7 +694,7 @@
p = swap_info_get(entry);
if (p) {
- if (swap_entry_free(p, entry) == 1) {
+ if (swap_entry_free(p, entry, SWAP_MAP) == SWAP_HAS_CACHE) {
page = find_get_page(&swapper_space, entry.val);
if (page && !trylock_page(page)) {
page_cache_release(page);
@@ -891,7 +1001,7 @@
i = 1;
}
count = si->swap_map[i];
- if (count && count != SWAP_MAP_BAD)
+ if (count && swap_count(count) != SWAP_MAP_BAD)
break;
}
return i;
@@ -995,13 +1105,13 @@
*/
shmem = 0;
swcount = *swap_map;
- if (swcount > 1) {
+ if (swap_count(swcount)) {
if (start_mm == &init_mm)
shmem = shmem_unuse(entry, page);
else
retval = unuse_mm(start_mm, entry, page);
}
- if (*swap_map > 1) {
+ if (swap_count(*swap_map)) {
int set_start_mm = (*swap_map >= swcount);
struct list_head *p = &start_mm->mmlist;
struct mm_struct *new_start_mm = start_mm;
@@ -1011,7 +1121,7 @@
atomic_inc(&new_start_mm->mm_users);
atomic_inc(&prev_mm->mm_users);
spin_lock(&mmlist_lock);
- while (*swap_map > 1 && !retval && !shmem &&
+ while (swap_count(*swap_map) && !retval && !shmem &&
(p = p->next) != &start_mm->mmlist) {
mm = list_entry(p, struct mm_struct, mmlist);
if (!atomic_inc_not_zero(&mm->mm_users))
@@ -1023,14 +1133,16 @@
cond_resched();
swcount = *swap_map;
- if (swcount <= 1)
+ if (!swap_count(swcount)) /* any usage ? */
;
else if (mm == &init_mm) {
set_start_mm = 1;
shmem = shmem_unuse(entry, page);
} else
retval = unuse_mm(mm, entry, page);
- if (set_start_mm && *swap_map < swcount) {
+
+ if (set_start_mm &&
+ swap_count(*swap_map) < swcount) {
mmput(new_start_mm);
atomic_inc(&mm->mm_users);
new_start_mm = mm;
@@ -1057,21 +1169,25 @@
}
/*
- * How could swap count reach 0x7fff when the maximum
- * pid is 0x7fff, and there's no way to repeat a swap
- * page within an mm (except in shmem, where it's the
- * shared object which takes the reference count)?
- * We believe SWAP_MAP_MAX cannot occur in Linux 2.4.
- *
+ * How could swap count reach 0x7ffe ?
+ * There's no way to repeat a swap page within an mm
+ * (except in shmem, where it's the shared object which takes
+ * the reference count)?
+ * We believe SWAP_MAP_MAX cannot occur.(if occur, unsigned
+ * short is too small....)
* If that's wrong, then we should worry more about
* exit_mmap() and do_munmap() cases described above:
* we might be resetting SWAP_MAP_MAX too early here.
* We know "Undead"s can happen, they're okay, so don't
* report them; but do report if we reset SWAP_MAP_MAX.
*/
- if (*swap_map == SWAP_MAP_MAX) {
+ /* We might release the lock_page() in unuse_mm(). */
+ if (!PageSwapCache(page) || page_private(page) != entry.val)
+ goto retry;
+
+ if (swap_count(*swap_map) == SWAP_MAP_MAX) {
spin_lock(&swap_lock);
- *swap_map = 1;
+ *swap_map = encode_swapmap(0, true);
spin_unlock(&swap_lock);
reset_overflow = 1;
}
@@ -1089,7 +1205,8 @@
* pages would be incorrect if swap supported "shared
* private" pages, but they are handled by tmpfs files.
*/
- if ((*swap_map > 1) && PageDirty(page) && PageSwapCache(page)) {
+ if (swap_count(*swap_map) &&
+ PageDirty(page) && PageSwapCache(page)) {
struct writeback_control wbc = {
.sync_mode = WB_SYNC_NONE,
};
@@ -1116,6 +1233,7 @@
* mark page dirty so shrink_page_list will preserve it.
*/
SetPageDirty(page);
+retry:
unlock_page(page);
page_cache_release(page);
@@ -1942,15 +2060,23 @@
*
* Note: if swap_map[] reaches SWAP_MAP_MAX the entries are treated as
* "permanent", but will be reclaimed by the next swapoff.
+ * Returns error code in following case.
+ * - success -> 0
+ * - swp_entry is invalid -> EINVAL
+ * - swp_entry is migration entry -> EINVAL
+ * - swap-cache reference is requested but there is already one. -> EEXIST
+ * - swap-cache reference is requested but the entry is not used. -> ENOENT
*/
-int swap_duplicate(swp_entry_t entry)
+static int __swap_duplicate(swp_entry_t entry, bool cache)
{
struct swap_info_struct * p;
unsigned long offset, type;
- int result = 0;
+ int result = -EINVAL;
+ int count;
+ bool has_cache;
if (is_migration_entry(entry))
- return 1;
+ return -EINVAL;
type = swp_type(entry);
if (type >= nr_swapfiles)
@@ -1959,17 +2085,40 @@
offset = swp_offset(entry);
spin_lock(&swap_lock);
- if (offset < p->max && p->swap_map[offset]) {
- if (p->swap_map[offset] < SWAP_MAP_MAX - 1) {
- p->swap_map[offset]++;
- result = 1;
- } else if (p->swap_map[offset] <= SWAP_MAP_MAX) {
+
+ if (unlikely(offset >= p->max))
+ goto unlock_out;
+
+ count = swap_count(p->swap_map[offset]);
+ has_cache = swap_has_cache(p->swap_map[offset]);
+
+ if (cache == SWAP_CACHE) { /* called for swapcache/swapin-readahead */
+
+ /* set SWAP_HAS_CACHE if there is no cache and entry is used */
+ if (!has_cache && count) {
+ p->swap_map[offset] = encode_swapmap(count, true);
+ result = 0;
+ } else if (has_cache) /* someone added cache */
+ result = -EEXIST;
+ else if (!count) /* no users */
+ result = -ENOENT;
+
+ } else if (count || has_cache) {
+ if (count < SWAP_MAP_MAX - 1) {
+ p->swap_map[offset] = encode_swapmap(count + 1,
+ has_cache);
+ result = 0;
+ } else if (count <= SWAP_MAP_MAX) {
if (swap_overflow++ < 5)
- printk(KERN_WARNING "swap_dup: swap entry overflow\n");
- p->swap_map[offset] = SWAP_MAP_MAX;
- result = 1;
+ printk(KERN_WARNING
+ "swap_dup: swap entry overflow\n");
+ p->swap_map[offset] = encode_swapmap(SWAP_MAP_MAX,
+ has_cache);
+ result = 0;
}
- }
+ } else
+ result = -ENOENT; /* unused swap entry */
+unlock_out:
spin_unlock(&swap_lock);
out:
return result;
@@ -1978,6 +2127,27 @@
printk(KERN_ERR "swap_dup: %s%08lx\n", Bad_file, entry.val);
goto out;
}
+/*
+ * increase reference count of swap entry by 1.
+ */
+void swap_duplicate(swp_entry_t entry)
+{
+ __swap_duplicate(entry, SWAP_MAP);
+}
+
+/*
+ * @entry: swap entry for which we allocate swap cache.
+ *
+ * Called when allocating swap cache for exising swap entry,
+ * This can return error codes. Returns 0 at success.
+ * -EBUSY means there is a swap cache.
+ * Note: return code is different from swap_duplicate().
+ */
+int swapcache_prepare(swp_entry_t entry)
+{
+ return __swap_duplicate(entry, SWAP_CACHE);
+}
+
struct swap_info_struct *
get_swap_info_struct(unsigned type)
@@ -2016,7 +2186,7 @@
/* Don't read in free or bad pages */
if (!si->swap_map[toff])
break;
- if (si->swap_map[toff] == SWAP_MAP_BAD)
+ if (swap_count(si->swap_map[toff]) == SWAP_MAP_BAD)
break;
}
/* Count contiguous allocated slots below our target */
@@ -2024,7 +2194,7 @@
/* Don't read in free or bad pages */
if (!si->swap_map[toff])
break;
- if (si->swap_map[toff] == SWAP_MAP_BAD)
+ if (swap_count(si->swap_map[toff]) == SWAP_MAP_BAD)
break;
}
spin_unlock(&swap_lock);
diff --git a/mm/truncate.c b/mm/truncate.c
index 12e1579..ccc3ecf 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -267,8 +267,21 @@
}
EXPORT_SYMBOL(truncate_inode_pages);
-unsigned long __invalidate_mapping_pages(struct address_space *mapping,
- pgoff_t start, pgoff_t end, bool be_atomic)
+/**
+ * invalidate_mapping_pages - Invalidate all the unlocked pages of one inode
+ * @mapping: the address_space which holds the pages to invalidate
+ * @start: the offset 'from' which to invalidate
+ * @end: the offset 'to' which to invalidate (inclusive)
+ *
+ * This function only removes the unlocked pages, if you want to
+ * remove all the pages of one inode, you must call truncate_inode_pages.
+ *
+ * invalidate_mapping_pages() will not block on IO activity. It will not
+ * invalidate pages which are dirty, locked, under writeback or mapped into
+ * pagetables.
+ */
+unsigned long invalidate_mapping_pages(struct address_space *mapping,
+ pgoff_t start, pgoff_t end)
{
struct pagevec pvec;
pgoff_t next = start;
@@ -309,30 +322,10 @@
break;
}
pagevec_release(&pvec);
- if (likely(!be_atomic))
- cond_resched();
+ cond_resched();
}
return ret;
}
-
-/**
- * invalidate_mapping_pages - Invalidate all the unlocked pages of one inode
- * @mapping: the address_space which holds the pages to invalidate
- * @start: the offset 'from' which to invalidate
- * @end: the offset 'to' which to invalidate (inclusive)
- *
- * This function only removes the unlocked pages, if you want to
- * remove all the pages of one inode, you must call truncate_inode_pages.
- *
- * invalidate_mapping_pages() will not block on IO activity. It will not
- * invalidate pages which are dirty, locked, under writeback or mapped into
- * pagetables.
- */
-unsigned long invalidate_mapping_pages(struct address_space *mapping,
- pgoff_t start, pgoff_t end)
-{
- return __invalidate_mapping_pages(mapping, start, end, false);
-}
EXPORT_SYMBOL(invalidate_mapping_pages);
/*
diff --git a/mm/util.c b/mm/util.c
index abc65aa..d5d2213 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -233,13 +233,21 @@
* @pages: array that receives pointers to the pages pinned.
* Should be at least nr_pages long.
*
- * Attempt to pin user pages in memory without taking mm->mmap_sem.
- * If not successful, it will fall back to taking the lock and
- * calling get_user_pages().
- *
* Returns number of pages pinned. This may be fewer than the number
* requested. If nr_pages is 0 or negative, returns 0. If no pages
* were pinned, returns -errno.
+ *
+ * get_user_pages_fast provides equivalent functionality to get_user_pages,
+ * operating on current and current->mm, with force=0 and vma=NULL. However
+ * unlike get_user_pages, it must be called without mmap_sem held.
+ *
+ * get_user_pages_fast may take mmap_sem and page table locks, so no
+ * assumptions can be made about lack of locking. get_user_pages_fast is to be
+ * implemented in a way that is advantageous (vs get_user_pages()) when the
+ * user memory area is already faulted in and present in ptes. However if the
+ * pages have to be faulted in, it may turn out to be slightly slower so
+ * callers need to carefully consider what to use. On many architectures,
+ * get_user_pages_fast simply falls back to get_user_pages.
*/
int __attribute__((weak)) get_user_pages_fast(unsigned long start,
int nr_pages, int write, struct page **pages)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 95c08a8..4139aa5 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -470,8 +470,7 @@
swp_entry_t swap = { .val = page_private(page) };
__delete_from_swap_cache(page);
spin_unlock_irq(&mapping->tree_lock);
- mem_cgroup_uncharge_swapcache(page, swap);
- swap_free(swap);
+ swapcache_free(swap, page);
} else {
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
@@ -514,7 +513,6 @@
*
* lru_lock must not be held, interrupts must be enabled.
*/
-#ifdef CONFIG_UNEVICTABLE_LRU
void putback_lru_page(struct page *page)
{
int lru;
@@ -568,20 +566,6 @@
put_page(page); /* drop ref from isolate */
}
-#else /* CONFIG_UNEVICTABLE_LRU */
-
-void putback_lru_page(struct page *page)
-{
- int lru;
- VM_BUG_ON(PageLRU(page));
-
- lru = !!TestClearPageActive(page) + page_is_file_cache(page);
- lru_cache_add_lru(page, lru);
- put_page(page);
-}
-#endif /* CONFIG_UNEVICTABLE_LRU */
-
-
/*
* shrink_page_list() returns the number of reclaimed pages
*/
@@ -593,6 +577,7 @@
struct pagevec freed_pvec;
int pgactivate = 0;
unsigned long nr_reclaimed = 0;
+ unsigned long vm_flags;
cond_resched();
@@ -643,7 +628,8 @@
goto keep_locked;
}
- referenced = page_referenced(page, 1, sc->mem_cgroup);
+ referenced = page_referenced(page, 1,
+ sc->mem_cgroup, &vm_flags);
/* In active use or really unfreeable? Activate it. */
if (sc->order <= PAGE_ALLOC_COSTLY_ORDER &&
referenced && page_mapping_inuse(page))
@@ -943,18 +929,10 @@
/* Check that we have not crossed a zone boundary. */
if (unlikely(page_zone_id(cursor_page) != zone_id))
continue;
- switch (__isolate_lru_page(cursor_page, mode, file)) {
- case 0:
+ if (__isolate_lru_page(cursor_page, mode, file) == 0) {
list_move(&cursor_page->lru, dst);
nr_taken++;
scan++;
- break;
-
- case -EBUSY:
- /* else it is being freed elsewhere */
- list_move(&cursor_page->lru, src);
- default:
- break; /* ! on LRU or wrong list */
}
}
}
@@ -1061,6 +1039,19 @@
unsigned long nr_scanned = 0;
unsigned long nr_reclaimed = 0;
struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
+ int lumpy_reclaim = 0;
+
+ /*
+ * If we need a large contiguous chunk of memory, or have
+ * trouble getting a small set of contiguous pages, we
+ * will reclaim both active and inactive pages.
+ *
+ * We use the same threshold as pageout congestion_wait below.
+ */
+ if (sc->order > PAGE_ALLOC_COSTLY_ORDER)
+ lumpy_reclaim = 1;
+ else if (sc->order && priority < DEF_PRIORITY - 2)
+ lumpy_reclaim = 1;
pagevec_init(&pvec, 1);
@@ -1073,19 +1064,7 @@
unsigned long nr_freed;
unsigned long nr_active;
unsigned int count[NR_LRU_LISTS] = { 0, };
- int mode = ISOLATE_INACTIVE;
-
- /*
- * If we need a large contiguous chunk of memory, or have
- * trouble getting a small set of contiguous pages, we
- * will reclaim both active and inactive pages.
- *
- * We use the same threshold as pageout congestion_wait below.
- */
- if (sc->order > PAGE_ALLOC_COSTLY_ORDER)
- mode = ISOLATE_BOTH;
- else if (sc->order && priority < DEF_PRIORITY - 2)
- mode = ISOLATE_BOTH;
+ int mode = lumpy_reclaim ? ISOLATE_BOTH : ISOLATE_INACTIVE;
nr_taken = sc->isolate_pages(sc->swap_cluster_max,
&page_list, &nr_scan, sc->order, mode,
@@ -1122,7 +1101,7 @@
* but that should be acceptable to the caller
*/
if (nr_freed < nr_taken && !current_is_kswapd() &&
- sc->order > PAGE_ALLOC_COSTLY_ORDER) {
+ lumpy_reclaim) {
congestion_wait(WRITE, HZ/10);
/*
@@ -1217,18 +1196,54 @@
* But we had to alter page->flags anyway.
*/
+static void move_active_pages_to_lru(struct zone *zone,
+ struct list_head *list,
+ enum lru_list lru)
+{
+ unsigned long pgmoved = 0;
+ struct pagevec pvec;
+ struct page *page;
+
+ pagevec_init(&pvec, 1);
+
+ while (!list_empty(list)) {
+ page = lru_to_page(list);
+ prefetchw_prev_lru_page(page, list, flags);
+
+ VM_BUG_ON(PageLRU(page));
+ SetPageLRU(page);
+
+ VM_BUG_ON(!PageActive(page));
+ if (!is_active_lru(lru))
+ ClearPageActive(page); /* we are de-activating */
+
+ list_move(&page->lru, &zone->lru[lru].list);
+ mem_cgroup_add_lru_list(page, lru);
+ pgmoved++;
+
+ if (!pagevec_add(&pvec, page) || list_empty(list)) {
+ spin_unlock_irq(&zone->lru_lock);
+ if (buffer_heads_over_limit)
+ pagevec_strip(&pvec);
+ __pagevec_release(&pvec);
+ spin_lock_irq(&zone->lru_lock);
+ }
+ }
+ __mod_zone_page_state(zone, NR_LRU_BASE + lru, pgmoved);
+ if (!is_active_lru(lru))
+ __count_vm_events(PGDEACTIVATE, pgmoved);
+}
static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
struct scan_control *sc, int priority, int file)
{
unsigned long pgmoved;
- int pgdeactivate = 0;
unsigned long pgscanned;
+ unsigned long vm_flags;
LIST_HEAD(l_hold); /* The pages which were snipped off */
+ LIST_HEAD(l_active);
LIST_HEAD(l_inactive);
struct page *page;
- struct pagevec pvec;
- enum lru_list lru;
struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
lru_add_drain();
@@ -1245,13 +1260,14 @@
}
reclaim_stat->recent_scanned[!!file] += pgmoved;
+ __count_zone_vm_events(PGREFILL, zone, pgscanned);
if (file)
__mod_zone_page_state(zone, NR_ACTIVE_FILE, -pgmoved);
else
__mod_zone_page_state(zone, NR_ACTIVE_ANON, -pgmoved);
spin_unlock_irq(&zone->lru_lock);
- pgmoved = 0;
+ pgmoved = 0; /* count referenced (mapping) mapped pages */
while (!list_empty(&l_hold)) {
cond_resched();
page = lru_to_page(&l_hold);
@@ -1264,58 +1280,44 @@
/* page_referenced clears PageReferenced */
if (page_mapping_inuse(page) &&
- page_referenced(page, 0, sc->mem_cgroup))
+ page_referenced(page, 0, sc->mem_cgroup, &vm_flags)) {
pgmoved++;
+ /*
+ * Identify referenced, file-backed active pages and
+ * give them one more trip around the active list. So
+ * that executable code get better chances to stay in
+ * memory under moderate memory pressure. Anon pages
+ * are not likely to be evicted by use-once streaming
+ * IO, plus JVM can create lots of anon VM_EXEC pages,
+ * so we ignore them here.
+ */
+ if ((vm_flags & VM_EXEC) && !PageAnon(page)) {
+ list_add(&page->lru, &l_active);
+ continue;
+ }
+ }
list_add(&page->lru, &l_inactive);
}
/*
- * Move the pages to the [file or anon] inactive list.
+ * Move pages back to the lru list.
*/
- pagevec_init(&pvec, 1);
- lru = LRU_BASE + file * LRU_FILE;
-
spin_lock_irq(&zone->lru_lock);
/*
- * Count referenced pages from currently used mappings as
- * rotated, even though they are moved to the inactive list.
- * This helps balance scan pressure between file and anonymous
- * pages in get_scan_ratio.
+ * Count referenced pages from currently used mappings as rotated,
+ * even though only some of them are actually re-activated. This
+ * helps balance scan pressure between file and anonymous pages in
+ * get_scan_ratio.
*/
reclaim_stat->recent_rotated[!!file] += pgmoved;
- pgmoved = 0;
- while (!list_empty(&l_inactive)) {
- page = lru_to_page(&l_inactive);
- prefetchw_prev_lru_page(page, &l_inactive, flags);
- VM_BUG_ON(PageLRU(page));
- SetPageLRU(page);
- VM_BUG_ON(!PageActive(page));
- ClearPageActive(page);
+ move_active_pages_to_lru(zone, &l_active,
+ LRU_ACTIVE + file * LRU_FILE);
+ move_active_pages_to_lru(zone, &l_inactive,
+ LRU_BASE + file * LRU_FILE);
- list_move(&page->lru, &zone->lru[lru].list);
- mem_cgroup_add_lru_list(page, lru);
- pgmoved++;
- if (!pagevec_add(&pvec, page)) {
- __mod_zone_page_state(zone, NR_LRU_BASE + lru, pgmoved);
- spin_unlock_irq(&zone->lru_lock);
- pgdeactivate += pgmoved;
- pgmoved = 0;
- if (buffer_heads_over_limit)
- pagevec_strip(&pvec);
- __pagevec_release(&pvec);
- spin_lock_irq(&zone->lru_lock);
- }
- }
- __mod_zone_page_state(zone, NR_LRU_BASE + lru, pgmoved);
- pgdeactivate += pgmoved;
- __count_zone_vm_events(PGREFILL, zone, pgscanned);
- __count_vm_events(PGDEACTIVATE, pgdeactivate);
spin_unlock_irq(&zone->lru_lock);
- if (buffer_heads_over_limit)
- pagevec_strip(&pvec);
- pagevec_release(&pvec);
}
static int inactive_anon_is_low_global(struct zone *zone)
@@ -1350,12 +1352,48 @@
return low;
}
+static int inactive_file_is_low_global(struct zone *zone)
+{
+ unsigned long active, inactive;
+
+ active = zone_page_state(zone, NR_ACTIVE_FILE);
+ inactive = zone_page_state(zone, NR_INACTIVE_FILE);
+
+ return (active > inactive);
+}
+
+/**
+ * inactive_file_is_low - check if file pages need to be deactivated
+ * @zone: zone to check
+ * @sc: scan control of this context
+ *
+ * When the system is doing streaming IO, memory pressure here
+ * ensures that active file pages get deactivated, until more
+ * than half of the file pages are on the inactive list.
+ *
+ * Once we get to that situation, protect the system's working
+ * set from being evicted by disabling active file page aging.
+ *
+ * This uses a different ratio than the anonymous pages, because
+ * the page cache uses a use-once replacement algorithm.
+ */
+static int inactive_file_is_low(struct zone *zone, struct scan_control *sc)
+{
+ int low;
+
+ if (scanning_global_lru(sc))
+ low = inactive_file_is_low_global(zone);
+ else
+ low = mem_cgroup_inactive_file_is_low(sc->mem_cgroup);
+ return low;
+}
+
static unsigned long shrink_list(enum lru_list lru, unsigned long nr_to_scan,
struct zone *zone, struct scan_control *sc, int priority)
{
int file = is_file_lru(lru);
- if (lru == LRU_ACTIVE_FILE) {
+ if (lru == LRU_ACTIVE_FILE && inactive_file_is_low(zone, sc)) {
shrink_active_list(nr_to_scan, zone, sc, priority, file);
return 0;
}
@@ -1384,13 +1422,6 @@
unsigned long ap, fp;
struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
- /* If we have no swap space, do not bother scanning anon pages. */
- if (!sc->may_swap || (nr_swap_pages <= 0)) {
- percent[0] = 0;
- percent[1] = 100;
- return;
- }
-
anon = zone_nr_pages(zone, sc, LRU_ACTIVE_ANON) +
zone_nr_pages(zone, sc, LRU_INACTIVE_ANON);
file = zone_nr_pages(zone, sc, LRU_ACTIVE_FILE) +
@@ -1400,7 +1431,7 @@
free = zone_page_state(zone, NR_FREE_PAGES);
/* If we have very few page cache pages,
force-scan anon pages. */
- if (unlikely(file + free <= zone->pages_high)) {
+ if (unlikely(file + free <= high_wmark_pages(zone))) {
percent[0] = 100;
percent[1] = 0;
return;
@@ -1455,6 +1486,26 @@
percent[1] = 100 - percent[0];
}
+/*
+ * Smallish @nr_to_scan's are deposited in @nr_saved_scan,
+ * until we collected @swap_cluster_max pages to scan.
+ */
+static unsigned long nr_scan_try_batch(unsigned long nr_to_scan,
+ unsigned long *nr_saved_scan,
+ unsigned long swap_cluster_max)
+{
+ unsigned long nr;
+
+ *nr_saved_scan += nr_to_scan;
+ nr = *nr_saved_scan;
+
+ if (nr >= swap_cluster_max)
+ *nr_saved_scan = 0;
+ else
+ nr = 0;
+
+ return nr;
+}
/*
* This is a basic per-zone page freer. Used by both kswapd and direct reclaim.
@@ -1468,26 +1519,30 @@
enum lru_list l;
unsigned long nr_reclaimed = sc->nr_reclaimed;
unsigned long swap_cluster_max = sc->swap_cluster_max;
+ int noswap = 0;
- get_scan_ratio(zone, sc, percent);
+ /* If we have no swap space, do not bother scanning anon pages. */
+ if (!sc->may_swap || (nr_swap_pages <= 0)) {
+ noswap = 1;
+ percent[0] = 0;
+ percent[1] = 100;
+ } else
+ get_scan_ratio(zone, sc, percent);
for_each_evictable_lru(l) {
int file = is_file_lru(l);
unsigned long scan;
scan = zone_nr_pages(zone, sc, l);
- if (priority) {
+ if (priority || noswap) {
scan >>= priority;
scan = (scan * percent[file]) / 100;
}
- if (scanning_global_lru(sc)) {
- zone->lru[l].nr_scan += scan;
- nr[l] = zone->lru[l].nr_scan;
- if (nr[l] >= swap_cluster_max)
- zone->lru[l].nr_scan = 0;
- else
- nr[l] = 0;
- } else
+ if (scanning_global_lru(sc))
+ nr[l] = nr_scan_try_batch(scan,
+ &zone->lru[l].nr_saved_scan,
+ swap_cluster_max);
+ else
nr[l] = scan;
}
@@ -1521,7 +1576,7 @@
* Even if we did not try to evict anon pages at all, we want to
* rebalance the anon lru active/inactive ratio.
*/
- if (inactive_anon_is_low(zone, sc))
+ if (inactive_anon_is_low(zone, sc) && nr_swap_pages > 0)
shrink_active_list(SWAP_CLUSTER_MAX, zone, sc, priority, 0);
throttle_vm_writeout(sc->gfp_mask);
@@ -1532,11 +1587,13 @@
* try to reclaim pages from zones which will satisfy the caller's allocation
* request.
*
- * We reclaim from a zone even if that zone is over pages_high. Because:
+ * We reclaim from a zone even if that zone is over high_wmark_pages(zone).
+ * Because:
* a) The caller may be trying to free *extra* pages to satisfy a higher-order
* allocation or
- * b) The zones may be over pages_high but they must go *over* pages_high to
- * satisfy the `incremental min' zone defense algorithm.
+ * b) The target zone may be at high_wmark_pages(zone) but the lower zones
+ * must go *over* high_wmark_pages(zone) to satisfy the `incremental min'
+ * zone defense algorithm.
*
* If a zone is deemed to be full of pinned pages then just give it a light
* scan then give up on it.
@@ -1742,7 +1799,7 @@
/*
* For kswapd, balance_pgdat() will work across all this node's zones until
- * they are all at pages_high.
+ * they are all at high_wmark_pages(zone).
*
* Returns the number of pages which were actually freed.
*
@@ -1755,11 +1812,11 @@
* the zone for when the problem goes away.
*
* kswapd scans the zones in the highmem->normal->dma direction. It skips
- * zones which have free_pages > pages_high, but once a zone is found to have
- * free_pages <= pages_high, we scan that zone and the lower zones regardless
- * of the number of free pages in the lower zones. This interoperates with
- * the page allocator fallback scheme to ensure that aging of pages is balanced
- * across the zones.
+ * zones which have free_pages > high_wmark_pages(zone), but once a zone is
+ * found to have free_pages <= high_wmark_pages(zone), we scan that zone and the
+ * lower zones regardless of the number of free pages in the lower zones. This
+ * interoperates with the page allocator fallback scheme to ensure that aging
+ * of pages is balanced across the zones.
*/
static unsigned long balance_pgdat(pg_data_t *pgdat, int order)
{
@@ -1780,7 +1837,8 @@
};
/*
* temp_priority is used to remember the scanning priority at which
- * this zone was successfully refilled to free_pages == pages_high.
+ * this zone was successfully refilled to
+ * free_pages == high_wmark_pages(zone).
*/
int temp_priority[MAX_NR_ZONES];
@@ -1825,8 +1883,8 @@
shrink_active_list(SWAP_CLUSTER_MAX, zone,
&sc, priority, 0);
- if (!zone_watermark_ok(zone, order, zone->pages_high,
- 0, 0)) {
+ if (!zone_watermark_ok(zone, order,
+ high_wmark_pages(zone), 0, 0)) {
end_zone = i;
break;
}
@@ -1860,8 +1918,8 @@
priority != DEF_PRIORITY)
continue;
- if (!zone_watermark_ok(zone, order, zone->pages_high,
- end_zone, 0))
+ if (!zone_watermark_ok(zone, order,
+ high_wmark_pages(zone), end_zone, 0))
all_zones_ok = 0;
temp_priority[i] = priority;
sc.nr_scanned = 0;
@@ -1870,8 +1928,8 @@
* We put equal pressure on every zone, unless one
* zone has way too many pages free already.
*/
- if (!zone_watermark_ok(zone, order, 8*zone->pages_high,
- end_zone, 0))
+ if (!zone_watermark_ok(zone, order,
+ 8*high_wmark_pages(zone), end_zone, 0))
shrink_zone(priority, zone, &sc);
reclaim_state->reclaimed_slab = 0;
nr_slab = shrink_slab(sc.nr_scanned, GFP_KERNEL,
@@ -2037,7 +2095,7 @@
return;
pgdat = zone->zone_pgdat;
- if (zone_watermark_ok(zone, order, zone->pages_low, 0, 0))
+ if (zone_watermark_ok(zone, order, low_wmark_pages(zone), 0, 0))
return;
if (pgdat->kswapd_max_order < order)
pgdat->kswapd_max_order = order;
@@ -2084,11 +2142,11 @@
l == LRU_ACTIVE_FILE))
continue;
- zone->lru[l].nr_scan += (lru_pages >> prio) + 1;
- if (zone->lru[l].nr_scan >= nr_pages || pass > 3) {
+ zone->lru[l].nr_saved_scan += (lru_pages >> prio) + 1;
+ if (zone->lru[l].nr_saved_scan >= nr_pages || pass > 3) {
unsigned long nr_to_scan;
- zone->lru[l].nr_scan = 0;
+ zone->lru[l].nr_saved_scan = 0;
nr_to_scan = min(nr_pages, lru_pages);
nr_reclaimed += shrink_list(l, nr_to_scan, zone,
sc, prio);
@@ -2290,6 +2348,48 @@
*/
int sysctl_min_slab_ratio = 5;
+static inline unsigned long zone_unmapped_file_pages(struct zone *zone)
+{
+ unsigned long file_mapped = zone_page_state(zone, NR_FILE_MAPPED);
+ unsigned long file_lru = zone_page_state(zone, NR_INACTIVE_FILE) +
+ zone_page_state(zone, NR_ACTIVE_FILE);
+
+ /*
+ * It's possible for there to be more file mapped pages than
+ * accounted for by the pages on the file LRU lists because
+ * tmpfs pages accounted for as ANON can also be FILE_MAPPED
+ */
+ return (file_lru > file_mapped) ? (file_lru - file_mapped) : 0;
+}
+
+/* Work out how many page cache pages we can reclaim in this reclaim_mode */
+static long zone_pagecache_reclaimable(struct zone *zone)
+{
+ long nr_pagecache_reclaimable;
+ long delta = 0;
+
+ /*
+ * If RECLAIM_SWAP is set, then all file pages are considered
+ * potentially reclaimable. Otherwise, we have to worry about
+ * pages like swapcache and zone_unmapped_file_pages() provides
+ * a better estimate
+ */
+ if (zone_reclaim_mode & RECLAIM_SWAP)
+ nr_pagecache_reclaimable = zone_page_state(zone, NR_FILE_PAGES);
+ else
+ nr_pagecache_reclaimable = zone_unmapped_file_pages(zone);
+
+ /* If we can't clean pages, remove dirty pages from consideration */
+ if (!(zone_reclaim_mode & RECLAIM_WRITE))
+ delta += zone_page_state(zone, NR_FILE_DIRTY);
+
+ /* Watch for any possible underflows due to delta */
+ if (unlikely(delta > nr_pagecache_reclaimable))
+ delta = nr_pagecache_reclaimable;
+
+ return nr_pagecache_reclaimable - delta;
+}
+
/*
* Try to free up some pages from this zone through reclaim.
*/
@@ -2324,9 +2424,7 @@
reclaim_state.reclaimed_slab = 0;
p->reclaim_state = &reclaim_state;
- if (zone_page_state(zone, NR_FILE_PAGES) -
- zone_page_state(zone, NR_FILE_MAPPED) >
- zone->min_unmapped_pages) {
+ if (zone_pagecache_reclaimable(zone) > zone->min_unmapped_pages) {
/*
* Free memory by calling shrink zone with increasing
* priorities until we have enough memory freed.
@@ -2384,20 +2482,18 @@
* if less than a specified percentage of the zone is used by
* unmapped file backed pages.
*/
- if (zone_page_state(zone, NR_FILE_PAGES) -
- zone_page_state(zone, NR_FILE_MAPPED) <= zone->min_unmapped_pages
- && zone_page_state(zone, NR_SLAB_RECLAIMABLE)
- <= zone->min_slab_pages)
- return 0;
+ if (zone_pagecache_reclaimable(zone) <= zone->min_unmapped_pages &&
+ zone_page_state(zone, NR_SLAB_RECLAIMABLE) <= zone->min_slab_pages)
+ return ZONE_RECLAIM_FULL;
if (zone_is_all_unreclaimable(zone))
- return 0;
+ return ZONE_RECLAIM_FULL;
/*
* Do not scan if the allocation should not be delayed.
*/
if (!(gfp_mask & __GFP_WAIT) || (current->flags & PF_MEMALLOC))
- return 0;
+ return ZONE_RECLAIM_NOSCAN;
/*
* Only run zone reclaim on the local zone or on zones that do not
@@ -2407,18 +2503,21 @@
*/
node_id = zone_to_nid(zone);
if (node_state(node_id, N_CPU) && node_id != numa_node_id())
- return 0;
+ return ZONE_RECLAIM_NOSCAN;
if (zone_test_and_set_flag(zone, ZONE_RECLAIM_LOCKED))
- return 0;
+ return ZONE_RECLAIM_NOSCAN;
+
ret = __zone_reclaim(zone, gfp_mask, order);
zone_clear_flag(zone, ZONE_RECLAIM_LOCKED);
+ if (!ret)
+ count_vm_event(PGSCAN_ZONE_RECLAIM_FAILED);
+
return ret;
}
#endif
-#ifdef CONFIG_UNEVICTABLE_LRU
/*
* page_evictable - test whether a page is evictable
* @page: the page to test
@@ -2665,4 +2764,3 @@
sysdev_remove_file(&node->sysdev, &attr_scan_unevictable_pages);
}
-#endif
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 74d66db..138bed5 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -629,10 +629,8 @@
"nr_active_anon",
"nr_inactive_file",
"nr_active_file",
-#ifdef CONFIG_UNEVICTABLE_LRU
"nr_unevictable",
"nr_mlock",
-#endif
"nr_anon_pages",
"nr_mapped",
"nr_file_pages",
@@ -675,6 +673,9 @@
TEXTS_FOR_ZONES("pgscan_kswapd")
TEXTS_FOR_ZONES("pgscan_direct")
+#ifdef CONFIG_NUMA
+ "zone_reclaim_failed",
+#endif
"pginodesteal",
"slabs_scanned",
"kswapd_steal",
@@ -687,7 +688,6 @@
"htlb_buddy_alloc_success",
"htlb_buddy_alloc_fail",
#endif
-#ifdef CONFIG_UNEVICTABLE_LRU
"unevictable_pgs_culled",
"unevictable_pgs_scanned",
"unevictable_pgs_rescued",
@@ -697,7 +697,6 @@
"unevictable_pgs_stranded",
"unevictable_pgs_mlockfreed",
#endif
-#endif
};
static void zoneinfo_show_print(struct seq_file *m, pg_data_t *pgdat,
@@ -710,18 +709,14 @@
"\n min %lu"
"\n low %lu"
"\n high %lu"
- "\n scanned %lu (aa: %lu ia: %lu af: %lu if: %lu)"
+ "\n scanned %lu"
"\n spanned %lu"
"\n present %lu",
zone_page_state(zone, NR_FREE_PAGES),
- zone->pages_min,
- zone->pages_low,
- zone->pages_high,
+ min_wmark_pages(zone),
+ low_wmark_pages(zone),
+ high_wmark_pages(zone),
zone->pages_scanned,
- zone->lru[LRU_ACTIVE_ANON].nr_scan,
- zone->lru[LRU_INACTIVE_ANON].nr_scan,
- zone->lru[LRU_ACTIVE_FILE].nr_scan,
- zone->lru[LRU_INACTIVE_FILE].nr_scan,
zone->spanned_pages,
zone->present_pages);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 1a94a30..5c93435 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -39,6 +39,7 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/kmemcheck.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/in.h>
@@ -201,6 +202,8 @@
skb->data = data;
skb_reset_tail_pointer(skb);
skb->end = skb->tail + size;
+ kmemcheck_annotate_bitfield(skb, flags1);
+ kmemcheck_annotate_bitfield(skb, flags2);
/* make sure we initialize shinfo sequentially */
shinfo = skb_shinfo(skb);
atomic_set(&shinfo->dataref, 1);
@@ -217,6 +220,8 @@
struct sk_buff *child = skb + 1;
atomic_t *fclone_ref = (atomic_t *) (child + 1);
+ kmemcheck_annotate_bitfield(child, flags1);
+ kmemcheck_annotate_bitfield(child, flags2);
skb->fclone = SKB_FCLONE_ORIG;
atomic_set(fclone_ref, 1);
@@ -635,6 +640,9 @@
n = kmem_cache_alloc(skbuff_head_cache, gfp_mask);
if (!n)
return NULL;
+
+ kmemcheck_annotate_bitfield(n, flags1);
+ kmemcheck_annotate_bitfield(n, flags2);
n->fclone = SKB_FCLONE_UNAVAILABLE;
}
diff --git a/net/core/sock.c b/net/core/sock.c
index 06e26b7..b0ba569 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -945,6 +945,8 @@
sk = kmalloc(prot->obj_size, priority);
if (sk != NULL) {
+ kmemcheck_annotate_bitfield(sk, flags);
+
if (security_sk_alloc(sk, family, priority))
goto out_free;
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index 68a8d89..61283f9 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -9,6 +9,7 @@
*/
#include <linux/kernel.h>
+#include <linux/kmemcheck.h>
#include <net/inet_hashtables.h>
#include <net/inet_timewait_sock.h>
#include <net/ip.h>
@@ -120,6 +121,8 @@
if (tw != NULL) {
const struct inet_sock *inet = inet_sk(sk);
+ kmemcheck_annotate_bitfield(tw, flags);
+
/* Give us an identity. */
tw->tw_daddr = inet->daddr;
tw->tw_rcv_saddr = inet->rcv_saddr;
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index 8847add..5ed8931 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -124,7 +124,7 @@
{
unsigned int node;
- if (num_online_nodes() > 1) {
+ if (nr_online_nodes > 1) {
/*
* Actually have multiple NUMA nodes,
* so split pools on NUMA node boundaries
diff --git a/samples/Kconfig b/samples/Kconfig
index b75d28c..428b065 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -26,7 +26,8 @@
This build trace event example modules.
config SAMPLE_KOBJECT
- tristate "Build kobject examples"
+ tristate "Build kobject examples -- loadable modules only"
+ depends on m
help
This config option will allow you to build a number of
different kobject sample modules showing how to use kobjects,
diff --git a/samples/firmware_class/firmware_sample_driver.c b/samples/firmware_class/firmware_sample_driver.c
deleted file mode 100644
index 219a298..0000000
--- a/samples/firmware_class/firmware_sample_driver.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * firmware_sample_driver.c -
- *
- * Copyright (c) 2003 Manuel Estrada Sainz
- *
- * Sample code on how to use request_firmware() from drivers.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/string.h>
-#include <linux/firmware.h>
-
-static struct device ghost_device = {
- .bus_id = "ghost0",
-};
-
-
-static void sample_firmware_load(char *firmware, int size)
-{
- u8 buf[size+1];
- memcpy(buf, firmware, size);
- buf[size] = '\0';
- printk(KERN_INFO "firmware_sample_driver: firmware: %s\n", buf);
-}
-
-static void sample_probe_default(void)
-{
- /* uses the default method to get the firmware */
- const struct firmware *fw_entry;
- int retval;
-
- printk(KERN_INFO "firmware_sample_driver: "
- "a ghost device got inserted :)\n");
-
- retval = request_firmware(&fw_entry, "sample_driver_fw", &ghost_device);
- if (retval) {
- printk(KERN_ERR
- "firmware_sample_driver: Firmware not available\n");
- return;
- }
-
- sample_firmware_load(fw_entry->data, fw_entry->size);
-
- release_firmware(fw_entry);
-
- /* finish setting up the device */
-}
-
-static void sample_probe_specific(void)
-{
- int retval;
- /* Uses some specific hotplug support to get the firmware from
- * userspace directly into the hardware, or via some sysfs file */
-
- /* NOTE: This currently doesn't work */
-
- printk(KERN_INFO "firmware_sample_driver: "
- "a ghost device got inserted :)\n");
-
- retval = request_firmware(NULL, "sample_driver_fw", &ghost_device);
- if (retval) {
- printk(KERN_ERR
- "firmware_sample_driver: Firmware load failed\n");
- return;
- }
-
- /* request_firmware blocks until userspace finished, so at
- * this point the firmware should be already in the device */
-
- /* finish setting up the device */
-}
-
-static void sample_probe_async_cont(const struct firmware *fw, void *context)
-{
- if (!fw) {
- printk(KERN_ERR
- "firmware_sample_driver: firmware load failed\n");
- return;
- }
-
- printk(KERN_INFO "firmware_sample_driver: device pointer \"%s\"\n",
- (char *)context);
- sample_firmware_load(fw->data, fw->size);
-}
-
-static void sample_probe_async(void)
-{
- /* Let's say that I can't sleep */
- int error;
- error = request_firmware_nowait(THIS_MODULE, FW_ACTION_NOHOTPLUG,
- "sample_driver_fw", &ghost_device,
- "my device pointer",
- sample_probe_async_cont);
- if (error)
- printk(KERN_ERR "firmware_sample_driver:"
- " request_firmware_nowait failed\n");
-}
-
-static int __init sample_init(void)
-{
- device_initialize(&ghost_device);
- /* since there is no real hardware insertion I just call the
- * sample probe functions here */
- sample_probe_specific();
- sample_probe_default();
- sample_probe_async();
- return 0;
-}
-
-static void __exit sample_exit(void)
-{
-}
-
-module_init(sample_init);
-module_exit(sample_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/samples/firmware_class/firmware_sample_firmware_class.c b/samples/firmware_class/firmware_sample_firmware_class.c
deleted file mode 100644
index e6cf7a4..0000000
--- a/samples/firmware_class/firmware_sample_firmware_class.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * firmware_sample_firmware_class.c -
- *
- * Copyright (c) 2003 Manuel Estrada Sainz
- *
- * NOTE: This is just a probe of concept, if you think that your driver would
- * be well served by this mechanism please contact me first.
- *
- * DON'T USE THIS CODE AS IS
- *
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/firmware.h>
-
-
-MODULE_AUTHOR("Manuel Estrada Sainz");
-MODULE_DESCRIPTION("Hackish sample for using firmware class directly");
-MODULE_LICENSE("GPL");
-
-static inline struct class_device *to_class_dev(struct kobject *obj)
-{
- return container_of(obj, struct class_device, kobj);
-}
-
-static inline
-struct class_device_attribute *to_class_dev_attr(struct attribute *_attr)
-{
- return container_of(_attr, struct class_device_attribute, attr);
-}
-
-struct firmware_priv {
- char fw_id[FIRMWARE_NAME_MAX];
- s32 loading:2;
- u32 abort:1;
-};
-
-static ssize_t firmware_loading_show(struct class_device *class_dev, char *buf)
-{
- struct firmware_priv *fw_priv = class_get_devdata(class_dev);
- return sprintf(buf, "%d\n", fw_priv->loading);
-}
-
-static ssize_t firmware_loading_store(struct class_device *class_dev,
- const char *buf, size_t count)
-{
- struct firmware_priv *fw_priv = class_get_devdata(class_dev);
- int prev_loading = fw_priv->loading;
-
- fw_priv->loading = simple_strtol(buf, NULL, 10);
-
- switch (fw_priv->loading) {
- case -1:
- /* abort load an panic */
- break;
- case 1:
- /* setup load */
- break;
- case 0:
- if (prev_loading == 1) {
- /* finish load and get the device back to working
- * state */
- }
- break;
- }
-
- return count;
-}
-static CLASS_DEVICE_ATTR(loading, 0644,
- firmware_loading_show, firmware_loading_store);
-
-static ssize_t firmware_data_read(struct kobject *kobj,
- struct bin_attribute *bin_attr,
- char *buffer, loff_t offset, size_t count)
-{
- struct class_device *class_dev = to_class_dev(kobj);
- struct firmware_priv *fw_priv = class_get_devdata(class_dev);
-
- /* read from the devices firmware memory */
-
- return count;
-}
-static ssize_t firmware_data_write(struct kobject *kobj,
- struct bin_attribute *bin_attr,
- char *buffer, loff_t offset, size_t count)
-{
- struct class_device *class_dev = to_class_dev(kobj);
- struct firmware_priv *fw_priv = class_get_devdata(class_dev);
-
- /* write to the devices firmware memory */
-
- return count;
-}
-static struct bin_attribute firmware_attr_data = {
- .attr = {.name = "data", .mode = 0644},
- .size = 0,
- .read = firmware_data_read,
- .write = firmware_data_write,
-};
-static int fw_setup_class_device(struct class_device *class_dev,
- const char *fw_name,
- struct device *device)
-{
- int retval;
- struct firmware_priv *fw_priv;
-
- fw_priv = kzalloc(sizeof(struct firmware_priv), GFP_KERNEL);
- if (!fw_priv) {
- retval = -ENOMEM;
- goto out;
- }
-
- memset(class_dev, 0, sizeof(*class_dev));
-
- strncpy(fw_priv->fw_id, fw_name, FIRMWARE_NAME_MAX);
- fw_priv->fw_id[FIRMWARE_NAME_MAX-1] = '\0';
-
- strncpy(class_dev->class_id, device->bus_id, BUS_ID_SIZE);
- class_dev->class_id[BUS_ID_SIZE-1] = '\0';
- class_dev->dev = device;
-
- class_dev->class = &firmware_class;
- class_set_devdata(class_dev, fw_priv);
- retval = class_device_register(class_dev);
- if (retval) {
- printk(KERN_ERR "%s: class_device_register failed\n",
- __func__);
- goto error_free_fw_priv;
- }
-
- retval = sysfs_create_bin_file(&class_dev->kobj, &firmware_attr_data);
- if (retval) {
- printk(KERN_ERR "%s: sysfs_create_bin_file failed\n",
- __func__);
- goto error_unreg_class_dev;
- }
-
- retval = class_device_create_file(class_dev,
- &class_device_attr_loading);
- if (retval) {
- printk(KERN_ERR "%s: class_device_create_file failed\n",
- __func__);
- goto error_remove_data;
- }
-
- goto out;
-
-error_remove_data:
- sysfs_remove_bin_file(&class_dev->kobj, &firmware_attr_data);
-error_unreg_class_dev:
- class_device_unregister(class_dev);
-error_free_fw_priv:
- kfree(fw_priv);
-out:
- return retval;
-}
-static void fw_remove_class_device(struct class_device *class_dev)
-{
- struct firmware_priv *fw_priv = class_get_devdata(class_dev);
-
- class_device_remove_file(class_dev, &class_device_attr_loading);
- sysfs_remove_bin_file(&class_dev->kobj, &firmware_attr_data);
- class_device_unregister(class_dev);
-}
-
-static struct class_device *class_dev;
-
-static struct device my_device = {
- .bus_id = "my_dev0",
-};
-
-static int __init firmware_sample_init(void)
-{
- int error;
-
- device_initialize(&my_device);
- class_dev = kmalloc(sizeof(struct class_device), GFP_KERNEL);
- if (!class_dev)
- return -ENOMEM;
-
- error = fw_setup_class_device(class_dev, "my_firmware_image",
- &my_device);
- if (error) {
- kfree(class_dev);
- return error;
- }
- return 0;
-
-}
-static void __exit firmware_sample_exit(void)
-{
- struct firmware_priv *fw_priv = class_get_devdata(class_dev);
- fw_remove_class_device(class_dev);
- kfree(fw_priv);
- kfree(class_dev);
-}
-
-module_init(firmware_sample_init);
-module_exit(firmware_sample_exit);
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 60dc0c4..3e73314 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -13,7 +13,7 @@
use strict;
my $P = $0;
-my $V = '0.15';
+my $V = '0.16';
use Getopt::Long qw(:config no_auto_abbrev);
@@ -55,6 +55,10 @@
}
my $penguin_chiefs = "\(" . join("|",@penguin_chief_names) . "\)";
+# rfc822 email address - preloaded methods go here.
+my $rfc822_lwsp = "(?:(?:\\r\\n)?[ \\t])";
+my $rfc822_char = '[\\000-\\377]';
+
if (!GetOptions(
'email!' => \$email,
'git!' => \$email_git,
@@ -161,7 +165,7 @@
}
close(PATCH);
if ($file_cnt == @files) {
- die "$P: file '${file}' doesn't appear to be a patch. "
+ warn "$P: file '${file}' doesn't appear to be a patch. "
. "Add -f to options?\n";
}
@files = sort_and_uniq(@files);
@@ -169,6 +173,7 @@
}
my @email_to = ();
+my @list_to = ();
my @scm = ();
my @web = ();
my @subsystem = ();
@@ -182,7 +187,7 @@
my $exclude = 0;
foreach my $line (@typevalue) {
- if ($line =~ m/^(\C):(.*)/) {
+ if ($line =~ m/^(\C):\s*(.*)/) {
my $type = $1;
my $value = $2;
if ($type eq 'X') {
@@ -196,7 +201,7 @@
if (!$exclude) {
my $tvi = 0;
foreach my $line (@typevalue) {
- if ($line =~ m/^(\C):(.*)/) {
+ if ($line =~ m/^(\C):\s*(.*)/) {
my $type = $1;
my $value = $2;
if ($type eq 'F') {
@@ -215,29 +220,33 @@
}
-if ($email_git_penguin_chiefs) {
+if ($email) {
foreach my $chief (@penguin_chief) {
if ($chief =~ m/^(.*):(.*)/) {
- my $chief_name = $1;
- my $chief_addr = $2;
+ my $email_address;
if ($email_usename) {
- push(@email_to, format_email($chief_name, $chief_addr));
+ $email_address = format_email($1, $2);
} else {
- push(@email_to, $chief_addr);
+ $email_address = $2;
+ }
+ if ($email_git_penguin_chiefs) {
+ push(@email_to, $email_address);
+ } else {
+ @email_to = grep(!/${email_address}/, @email_to);
}
}
}
}
-if ($email) {
- my $address_cnt = @email_to;
- if ($address_cnt == 0 && $email_list) {
- push(@email_to, "linux-kernel\@vger.kernel.org");
+if ($email || $email_list) {
+ my @to = ();
+ if ($email) {
+ @to = (@to, @email_to);
}
-
-#Don't sort email address list, but do remove duplicates
- @email_to = uniq(@email_to);
- output(@email_to);
+ if ($email_list) {
+ @to = (@to, @list_to);
+ }
+ output(uniq(@to));
}
if ($scm) {
@@ -307,10 +316,10 @@
--multiline => print 1 entry per line
Default options:
- [--email --git --m --l --multiline]
+ [--email --git --m --n --l --multiline]
Other options:
- --version -> show version
+ --version => show version
--help => show this help information
EOT
@@ -347,6 +356,7 @@
my ($name, $email) = @_;
$name =~ s/^\s+|\s+$//g;
+ $name =~ s/^\"|\"$//g;
$email =~ s/^\s+|\s+$//g;
my $formatted_email = "";
@@ -366,36 +376,41 @@
$index = $index - 1;
while ($index >= 0) {
my $tv = $typevalue[$index];
- if ($tv =~ m/^(\C):(.*)/) {
+ if ($tv =~ m/^(\C):\s*(.*)/) {
my $ptype = $1;
my $pvalue = $2;
if ($ptype eq "L") {
- my $subscr = $pvalue;
- if ($subscr =~ m/\s*\(subscribers-only\)/) {
+ my $list_address = $pvalue;
+ my $list_additional = "";
+ if ($list_address =~ m/([^\s]+)\s+(.*)$/) {
+ $list_address = $1;
+ $list_additional = $2;
+ }
+ if ($list_additional =~ m/subscribers-only/) {
if ($email_subscriber_list) {
- $subscr =~ s/\s*\(subscribers-only\)//g;
- push(@email_to, $subscr);
+ push(@list_to, $list_address);
}
} else {
if ($email_list) {
- push(@email_to, $pvalue);
+ push(@list_to, $list_address);
}
}
} elsif ($ptype eq "M") {
- if ($email_maintainer) {
- if ($index >= 0) {
- my $tv = $typevalue[$index - 1];
- if ($tv =~ m/^(\C):(.*)/) {
- if ($1 eq "P" && $email_usename) {
- push(@email_to, format_email($2, $pvalue));
- } else {
- push(@email_to, $pvalue);
+ my $p_used = 0;
+ if ($index >= 0) {
+ my $tv = $typevalue[$index - 1];
+ if ($tv =~ m/^(\C):\s*(.*)/) {
+ if ($1 eq "P") {
+ if ($email_usename) {
+ push_email_address(format_email($2, $pvalue));
+ $p_used = 1;
}
}
- } else {
- push(@email_to, $pvalue);
}
}
+ if (!$p_used) {
+ push_email_addresses($pvalue);
+ }
} elsif ($ptype eq "T") {
push(@scm, $pvalue);
} elsif ($ptype eq "W") {
@@ -412,10 +427,45 @@
}
}
+sub push_email_address {
+ my ($email_address) = @_;
+
+ my $email_name = "";
+ if ($email_address =~ m/([^<]+)<(.*\@.*)>$/) {
+ $email_name = $1;
+ $email_address = $2;
+ }
+
+ if ($email_maintainer) {
+ if ($email_usename && $email_name) {
+ push(@email_to, format_email($email_name, $email_address));
+ } else {
+ push(@email_to, $email_address);
+ }
+ }
+}
+
+sub push_email_addresses {
+ my ($address) = @_;
+
+ my @address_list = ();
+
+ if (rfc822_valid($address)) {
+ push_email_address($address);
+ } elsif (@address_list = rfc822_validlist($address)) {
+ my $array_count = shift(@address_list);
+ while (my $entry = shift(@address_list)) {
+ push_email_address($entry);
+ }
+ } else {
+ warn("Invalid MAINTAINERS address: '" . $address . "'\n");
+ }
+}
+
sub which {
my ($bin) = @_;
- foreach my $path (split /:/, $ENV{PATH}) {
+ foreach my $path (split(/:/, $ENV{PATH})) {
if (-e "$path/$bin") {
return "$path/$bin";
}
@@ -434,16 +484,21 @@
my @lines = ();
if (which("git") eq "") {
- die("$P: git not found. Add --nogit to options?\n");
+ warn("$P: git not found. Add --nogit to options?\n");
+ return;
+ }
+ if (!(-d ".git")) {
+ warn("$P: .git directory not found. Use a git repository for better results.\n");
+ warn("$P: perhaps 'git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git'\n");
+ return;
}
$cmd = "git log --since=${email_git_since} -- ${file}";
- $cmd .= " | grep -Pi \"^[-_ a-z]+by:.*\\\@\"";
+ $cmd .= " | grep -Ei \"^[-_ a-z]+by:.*\\\@.*\$\"";
if (!$email_git_penguin_chiefs) {
- $cmd .= " | grep -Pv \"${penguin_chiefs}\"";
+ $cmd .= " | grep -Ev \"${penguin_chiefs}\"";
}
$cmd .= " | cut -f2- -d\":\"";
- $cmd .= " | sed -e \"s/^\\s+//g\"";
$cmd .= " | sort | uniq -c | sort -rn";
$output = `${cmd}`;
@@ -465,10 +520,6 @@
if ($line =~ m/(.+)<(.+)>/) {
my $git_name = $1;
my $git_addr = $2;
- $git_name =~ tr/^\"//;
- $git_name =~ tr/^\\s*//;
- $git_name =~ tr/\"$//;
- $git_name =~ tr/\\s*$//;
if ($email_usename) {
push(@email_to, format_email($git_name, $git_addr));
} else {
@@ -481,7 +532,6 @@
push(@email_to, $line);
}
}
- return $output;
}
sub uniq {
@@ -513,3 +563,97 @@
print("\n");
}
}
+
+my $rfc822re;
+
+sub make_rfc822re {
+# Basic lexical tokens are specials, domain_literal, quoted_string, atom, and
+# comment. We must allow for rfc822_lwsp (or comments) after each of these.
+# This regexp will only work on addresses which have had comments stripped
+# and replaced with rfc822_lwsp.
+
+ my $specials = '()<>@,;:\\\\".\\[\\]';
+ my $controls = '\\000-\\037\\177';
+
+ my $dtext = "[^\\[\\]\\r\\\\]";
+ my $domain_literal = "\\[(?:$dtext|\\\\.)*\\]$rfc822_lwsp*";
+
+ my $quoted_string = "\"(?:[^\\\"\\r\\\\]|\\\\.|$rfc822_lwsp)*\"$rfc822_lwsp*";
+
+# Use zero-width assertion to spot the limit of an atom. A simple
+# $rfc822_lwsp* causes the regexp engine to hang occasionally.
+ my $atom = "[^$specials $controls]+(?:$rfc822_lwsp+|\\Z|(?=[\\[\"$specials]))";
+ my $word = "(?:$atom|$quoted_string)";
+ my $localpart = "$word(?:\\.$rfc822_lwsp*$word)*";
+
+ my $sub_domain = "(?:$atom|$domain_literal)";
+ my $domain = "$sub_domain(?:\\.$rfc822_lwsp*$sub_domain)*";
+
+ my $addr_spec = "$localpart\@$rfc822_lwsp*$domain";
+
+ my $phrase = "$word*";
+ my $route = "(?:\@$domain(?:,\@$rfc822_lwsp*$domain)*:$rfc822_lwsp*)";
+ my $route_addr = "\\<$rfc822_lwsp*$route?$addr_spec\\>$rfc822_lwsp*";
+ my $mailbox = "(?:$addr_spec|$phrase$route_addr)";
+
+ my $group = "$phrase:$rfc822_lwsp*(?:$mailbox(?:,\\s*$mailbox)*)?;\\s*";
+ my $address = "(?:$mailbox|$group)";
+
+ return "$rfc822_lwsp*$address";
+}
+
+sub rfc822_strip_comments {
+ my $s = shift;
+# Recursively remove comments, and replace with a single space. The simpler
+# regexps in the Email Addressing FAQ are imperfect - they will miss escaped
+# chars in atoms, for example.
+
+ while ($s =~ s/^((?:[^"\\]|\\.)*
+ (?:"(?:[^"\\]|\\.)*"(?:[^"\\]|\\.)*)*)
+ \((?:[^()\\]|\\.)*\)/$1 /osx) {}
+ return $s;
+}
+
+# valid: returns true if the parameter is an RFC822 valid address
+#
+sub rfc822_valid ($) {
+ my $s = rfc822_strip_comments(shift);
+
+ if (!$rfc822re) {
+ $rfc822re = make_rfc822re();
+ }
+
+ return $s =~ m/^$rfc822re$/so && $s =~ m/^$rfc822_char*$/;
+}
+
+# validlist: In scalar context, returns true if the parameter is an RFC822
+# valid list of addresses.
+#
+# In list context, returns an empty list on failure (an invalid
+# address was found); otherwise a list whose first element is the
+# number of addresses found and whose remaining elements are the
+# addresses. This is needed to disambiguate failure (invalid)
+# from success with no addresses found, because an empty string is
+# a valid list.
+
+sub rfc822_validlist ($) {
+ my $s = rfc822_strip_comments(shift);
+
+ if (!$rfc822re) {
+ $rfc822re = make_rfc822re();
+ }
+ # * null list items are valid according to the RFC
+ # * the '1' business is to aid in distinguishing failure from no results
+
+ my @r;
+ if ($s =~ m/^(?:$rfc822re)?(?:,(?:$rfc822re)?)*$/so &&
+ $s =~ m/^$rfc822_char*$/) {
+ while ($s =~ m/(?:^|,$rfc822_lwsp*)($rfc822re)/gos) {
+ push @r, $1;
+ }
+ return wantarray ? (scalar(@r), @r) : 1;
+ }
+ else {
+ return wantarray ? () : 0;
+ }
+}
diff --git a/scripts/gfp-translate b/scripts/gfp-translate
new file mode 100644
index 0000000..073cb6d
--- /dev/null
+++ b/scripts/gfp-translate
@@ -0,0 +1,81 @@
+#!/bin/bash
+# Translate the bits making up a GFP mask
+# (c) 2009, Mel Gorman <mel@csn.ul.ie>
+# Licensed under the terms of the GNU GPL License version 2
+SOURCE=
+GFPMASK=none
+
+# Helper function to report failures and exit
+die() {
+ echo ERROR: $@
+ if [ "$TMPFILE" != "" ]; then
+ rm -f $TMPFILE
+ fi
+ exit -1
+}
+
+usage() {
+ echo "usage: gfp-translate [-h] [ --source DIRECTORY ] gfpmask"
+ exit 0
+}
+
+# Parse command-line arguements
+while [ $# -gt 0 ]; do
+ case $1 in
+ --source)
+ SOURCE=$2
+ shift 2
+ ;;
+ -h)
+ usage
+ ;;
+ --help)
+ usage
+ ;;
+ *)
+ GFPMASK=$1
+ shift
+ ;;
+ esac
+done
+
+# Guess the kernel source directory if it's not set. Preference is in order of
+# o current directory
+# o /usr/src/linux
+if [ "$SOURCE" = "" ]; then
+ if [ -r "/usr/src/linux/Makefile" ]; then
+ SOURCE=/usr/src/linux
+ fi
+ if [ -r "`pwd`/Makefile" ]; then
+ SOURCE=`pwd`
+ fi
+fi
+
+# Confirm that a source directory exists
+if [ ! -r "$SOURCE/Makefile" ]; then
+ die "Could not locate kernel source directory or it is invalid"
+fi
+
+# Confirm that a GFP mask has been specified
+if [ "$GFPMASK" = "none" ]; then
+ usage
+fi
+
+# Extract GFP flags from the kernel source
+TMPFILE=`mktemp -t gfptranslate-XXXXXX` || exit 1
+grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE
+
+# Parse the flags
+IFS="
+"
+echo Source: $SOURCE
+echo Parsing: $GFPMASK
+for LINE in `cat $TMPFILE`; do
+ MASK=`echo $LINE | awk '{print $3}'`
+ if [ $(($GFPMASK&$MASK)) -ne 0 ]; then
+ echo $LINE
+ fi
+done
+
+rm -f $TMPFILE
+exit 0
diff --git a/scripts/pnmtologo.c b/scripts/pnmtologo.c
index 6aa2a24..64f5ddb 100644
--- a/scripts/pnmtologo.c
+++ b/scripts/pnmtologo.c
@@ -237,22 +237,22 @@
fprintf(out, " * Linux logo %s\n", logoname);
fputs(" */\n\n", out);
fputs("#include <linux/linux_logo.h>\n\n", out);
- fprintf(out, "static unsigned char %s_data[] __initdata = {\n",
+ fprintf(out, "static const unsigned char %s_data[] __initconst = {\n",
logoname);
}
static void write_footer(void)
{
fputs("\n};\n\n", out);
- fprintf(out, "struct linux_logo %s __initdata = {\n", logoname);
- fprintf(out, " .type\t= %s,\n", logo_types[logo_type]);
- fprintf(out, " .width\t= %d,\n", logo_width);
- fprintf(out, " .height\t= %d,\n", logo_height);
+ fprintf(out, "const struct linux_logo %s __initconst = {\n", logoname);
+ fprintf(out, "\t.type\t\t= %s,\n", logo_types[logo_type]);
+ fprintf(out, "\t.width\t\t= %d,\n", logo_width);
+ fprintf(out, "\t.height\t\t= %d,\n", logo_height);
if (logo_type == LINUX_LOGO_CLUT224) {
- fprintf(out, " .clutsize\t= %d,\n", logo_clutsize);
- fprintf(out, " .clut\t= %s_clut,\n", logoname);
+ fprintf(out, "\t.clutsize\t= %d,\n", logo_clutsize);
+ fprintf(out, "\t.clut\t\t= %s_clut,\n", logoname);
}
- fprintf(out, " .data\t= %s_data\n", logoname);
+ fprintf(out, "\t.data\t\t= %s_data\n", logoname);
fputs("};\n\n", out);
/* close logo file */
@@ -374,7 +374,7 @@
fputs("\n};\n\n", out);
/* write logo clut */
- fprintf(out, "static unsigned char %s_clut[] __initdata = {\n",
+ fprintf(out, "static const unsigned char %s_clut[] __initconst = {\n",
logoname);
write_hex_cnt = 0;
for (i = 0; i < logo_clutsize; i++) {
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index 902f9a9..db40fa0 100644
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -12,10 +12,9 @@
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
- # mkdir /debugfs
- # mount -t debug debug /debug
- # echo function > /debug/tracing/current_tracer
- $ cat /debug/tracing/trace_pipe > ~/raw_trace_func
+ # mount -t debugfs nodev /sys/kernel/debug
+ # echo function > /sys/kernel/debug/tracing/current_tracer
+ $ cat /sys/kernel/debug/tracing/trace_pipe > ~/raw_trace_func
Wait some times but not too much, the script is a bit slow.
Break the pipe (Ctrl + Z)
$ scripts/draw_functrace.py < raw_trace_func > draw_functrace
diff --git a/sound/drivers/pcsp/pcsp.h b/sound/drivers/pcsp/pcsp.h
index cdef266..174dd2f 100644
--- a/sound/drivers/pcsp/pcsp.h
+++ b/sound/drivers/pcsp/pcsp.h
@@ -10,6 +10,7 @@
#define __PCSP_H__
#include <linux/hrtimer.h>
+#include <linux/timex.h>
#if defined(CONFIG_MIPS) || defined(CONFIG_X86)
/* Use the global PIT lock ! */
#include <asm/i8253.h>
diff --git a/sound/oss/pas2_pcm.c b/sound/oss/pas2_pcm.c
index 36c3ea6..8f7d175 100644
--- a/sound/oss/pas2_pcm.c
+++ b/sound/oss/pas2_pcm.c
@@ -17,7 +17,7 @@
#include <linux/init.h>
#include <linux/spinlock.h>
-#include <asm/timex.h>
+#include <linux/timex.h>
#include "sound_config.h"
#include "pas2.h"
diff --git a/sound/sound_core.c b/sound/sound_core.c
index 2b302bb..12522e6 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -27,6 +27,11 @@
MODULE_AUTHOR("Alan Cox");
MODULE_LICENSE("GPL");
+static char *sound_nodename(struct device *dev)
+{
+ return kasprintf(GFP_KERNEL, "snd/%s", dev_name(dev));
+}
+
static int __init init_soundcore(void)
{
int rc;
@@ -41,6 +46,8 @@
return PTR_ERR(sound_class);
}
+ sound_class->nodename = sound_nodename;
+
return 0;
}