m68k: reorganize Kconfig options to improve mmu/non-mmu selections
The current mmu and non-mmu Kconfig files can be merged to form
a more general selection of options. The current break up of options
is due to the simple brute force merge from the m68k and m68knommu
arch directories.
Many of the options are not at all specific to having the MMU enabled
or not. They are actually associated with a particular CPU type or
platform type.
Ultimately as we support all processors with the MMU disabled we need
many of these options to be selectable without the MMU option enabled.
And likewise some of the ColdFire processors, which currently are only
supported with the MMU disabled, do have MMU hardware, and will need
to have options selected on CPU type, not MMU disabled.
This patch removes the old mmu and non-mmu Kconfigs and instead breaks
up the configuration into four areas: cpu, machine, bus, devices.
The Kconfig.cpu lists all the options associated with selecting a CPU,
and includes options specific to each CPU type as well.
Kconfig.machine lists all options associated with selecting a machine
type. Almost always the machines selectable is restricted by the chosen
CPU.
Kconfig.bus contains options associated with selecting bus types on the
various machine types. That includes PCI bus, PCMCIA bus, etc.
Kconfig.devices contains options for drivers and driver associated
options.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
new file mode 100644
index 0000000..7d5c20b
--- /dev/null
+++ b/arch/m68k/Kconfig.machine
@@ -0,0 +1,626 @@
+comment "Machine Types"
+
+config AMIGA
+ bool "Amiga support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ This option enables support for the Amiga series of computers. If
+ you plan to use this kernel on an Amiga, say Y here and browse the
+ material available in <file:Documentation/m68k>; otherwise say N.
+
+config ATARI
+ bool "Atari support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ This option enables support for the 68000-based Atari series of
+ computers (including the TT, Falcon and Medusa). If you plan to use
+ this kernel on an Atari, say Y here and browse the material
+ available in <file:Documentation/m68k>; otherwise say N.
+
+config MAC
+ bool "Macintosh support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ This option enables support for the Apple Macintosh series of
+ computers (yes, there is experimental support now, at least for part
+ of the series).
+
+ Say N unless you're willing to code the remaining necessary support.
+ ;)
+
+config APOLLO
+ bool "Apollo support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ Say Y here if you want to run Linux on an MC680x0-based Apollo
+ Domain workstation such as the DN3500.
+
+config VME
+ bool "VME (Motorola and BVM) support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ Say Y here if you want to build a kernel for a 680x0 based VME
+ board. Boards currently supported include Motorola boards MVME147,
+ MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and
+ BVME6000 boards from BVM Ltd are also supported.
+
+config MVME147
+ bool "MVME147 support"
+ depends on MMU
+ depends on VME
+ help
+ Say Y to include support for early Motorola VME boards. This will
+ build a kernel which can run on MVME147 single-board computers. If
+ you select this option you will have to select the appropriate
+ drivers for SCSI, Ethernet and serial ports later on.
+
+config MVME16x
+ bool "MVME162, 166 and 167 support"
+ depends on MMU
+ depends on VME
+ help
+ Say Y to include support for Motorola VME boards. This will build a
+ kernel which can run on MVME162, MVME166, MVME167, MVME172, and
+ MVME177 boards. If you select this option you will have to select
+ the appropriate drivers for SCSI, Ethernet and serial ports later
+ on.
+
+config BVME6000
+ bool "BVME4000 and BVME6000 support"
+ depends on MMU
+ depends on VME
+ help
+ Say Y to include support for VME boards from BVM Ltd. This will
+ build a kernel which can run on BVME4000 and BVME6000 boards. If
+ you select this option you will have to select the appropriate
+ drivers for SCSI, Ethernet and serial ports later on.
+
+config HP300
+ bool "HP9000/300 and HP9000/400 support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ This option enables support for the HP9000/300 and HP9000/400 series
+ of workstations. Support for these machines is still somewhat
+ experimental. If you plan to try to use the kernel on such a machine
+ say Y here.
+ Everybody else says N.
+
+config SUN3X
+ bool "Sun3x support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ select M68030
+ help
+ This option enables support for the Sun 3x series of workstations.
+ Be warned that this support is very experimental.
+ Note that Sun 3x kernels are not compatible with Sun 3 hardware.
+ General Linux information on the Sun 3x series (now discontinued)
+ is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+ If you don't want to compile a kernel for a Sun 3x, say N.
+
+config Q40
+ bool "Q40/Q60 support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ The Q40 is a Motorola 68040-based successor to the Sinclair QL
+ manufactured in Germany. There is an official Q40 home page at
+ <http://www.q40.de/>. This option enables support for the Q40 and
+ Q60. Select your CPU below. For 68LC060 don't forget to enable FPU
+ emulation.
+
+config SUN3
+ bool "Sun3 support"
+ depends on MMU
+ depends on !MMU_MOTOROLA
+ select MMU_SUN3 if MMU
+ select M68020
+ help
+ This option enables support for the Sun 3 series of workstations
+ (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
+ that all other hardware types must be disabled, as Sun 3 kernels
+ are incompatible with all other m68k targets (including Sun 3x!).
+
+ If you don't want to compile a kernel exclusively for a Sun 3, say N.
+
+config PILOT
+ bool
+
+config PILOT3
+ bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support"
+ depends on M68328
+ select PILOT
+ help
+ Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII.
+
+config XCOPILOT_BUGS
+ bool "(X)Copilot support"
+ depends on PILOT3
+ help
+ Support the bugs of Xcopilot.
+
+config UC5272
+ bool "Arcturus Networks uC5272 dimm board support"
+ depends on M5272
+ help
+ Support for the Arcturus Networks uC5272 dimm board.
+
+config UC5282
+ bool "Arcturus Networks uC5282 board support"
+ depends on M528x
+ help
+ Support for the Arcturus Networks uC5282 dimm board.
+
+config UCSIMM
+ bool "uCsimm module support"
+ depends on M68EZ328
+ help
+ Support for the Arcturus Networks uCsimm module.
+
+config UCDIMM
+ bool "uDsimm module support"
+ depends on M68VZ328
+ help
+ Support for the Arcturus Networks uDsimm module.
+
+config DRAGEN2
+ bool "DragenEngine II board support"
+ depends on M68VZ328
+ help
+ Support for the DragenEngine II board.
+
+config DIRECT_IO_ACCESS
+ bool "Allow user to access IO directly"
+ depends on (UCSIMM || UCDIMM || DRAGEN2)
+ help
+ Disable the CPU internal registers protection in user mode,
+ to allow a user application to read/write them.
+
+config INIT_LCD
+ bool "Initialize LCD"
+ depends on (UCSIMM || UCDIMM || DRAGEN2)
+ help
+ Initialize the LCD controller of the 68x328 processor.
+
+config MEMORY_RESERVE
+ int "Memory reservation (MiB)"
+ depends on (UCSIMM || UCDIMM)
+ help
+ Reserve certain memory regions on 68x328 based boards.
+
+config UCQUICC
+ bool "Lineo uCquicc board support"
+ depends on M68360
+ help
+ Support for the Lineo uCquicc board.
+
+config ARNEWSH
+ bool
+
+config ARN5206
+ bool "Arnewsh 5206 board support"
+ depends on M5206
+ select ARNEWSH
+ help
+ Support for the Arnewsh 5206 board.
+
+config FREESCALE
+ bool
+
+config M5206eC3
+ bool "Motorola M5206eC3 board support"
+ depends on M5206e
+ select FREESCALE
+ help
+ Support for the Motorola M5206eC3 board.
+
+config ELITE
+ bool "Motorola M5206eLITE board support"
+ depends on M5206e
+ help
+ Support for the Motorola M5206eLITE board.
+
+config M5208EVB
+ bool "Freescale M5208EVB board support"
+ depends on M520x
+ select FREESCALE
+ help
+ Support for the Freescale Coldfire M5208EVB.
+
+config M5235EVB
+ bool "Freescale M5235EVB support"
+ depends on M523x
+ select FREESCALE
+ help
+ Support for the Freescale M5235EVB board.
+
+config M5249C3
+ bool "Motorola M5249C3 board support"
+ depends on M5249
+ select FREESCALE
+ help
+ Support for the Motorola M5249C3 board.
+
+config M5271EVB
+ bool "Freescale (Motorola) M5271EVB board support"
+ depends on M5271
+ select FREESCALE
+ help
+ Support for the Freescale (Motorola) M5271EVB board.
+
+config M5275EVB
+ bool "Freescale (Motorola) M5275EVB board support"
+ depends on M5275
+ select FREESCALE
+ help
+ Support for the Freescale (Motorola) M5275EVB board.
+
+config M5272C3
+ bool "Motorola M5272C3 board support"
+ depends on M5272
+ select FREESCALE
+ help
+ Support for the Motorola M5272C3 board.
+
+config senTec
+ bool
+
+config COBRA5272
+ bool "senTec COBRA5272 board support"
+ depends on M5272
+ select senTec
+ help
+ Support for the senTec COBRA5272 board.
+
+config AVNET
+ bool
+
+config AVNET5282
+ bool "Avnet 5282 board support"
+ depends on M528x
+ select AVNET
+ help
+ Support for the Avnet 5282 board.
+
+config M5282EVB
+ bool "Motorola M5282EVB board support"
+ depends on M528x
+ select FREESCALE
+ help
+ Support for the Motorola M5282EVB board.
+
+config COBRA5282
+ bool "senTec COBRA5282 board support"
+ depends on M528x
+ select senTec
+ help
+ Support for the senTec COBRA5282 board.
+
+config EMAC_INC
+ bool
+
+config SOM5282EM
+ bool "EMAC.Inc SOM5282EM board support"
+ depends on M528x
+ select EMAC_INC
+ help
+ Support for the EMAC.Inc SOM5282EM module.
+
+config WILDFIRE
+ bool "Intec Automation Inc. WildFire board support"
+ depends on M528x
+ help
+ Support for the Intec Automation Inc. WildFire.
+
+config WILDFIREMOD
+ bool "Intec Automation Inc. WildFire module support"
+ depends on M528x
+ help
+ Support for the Intec Automation Inc. WildFire module.
+
+config ARN5307
+ bool "Arnewsh 5307 board support"
+ depends on M5307
+ select ARNEWSH
+ help
+ Support for the Arnewsh 5307 board.
+
+config M5307C3
+ bool "Motorola M5307C3 board support"
+ depends on M5307
+ select FREESCALE
+ help
+ Support for the Motorola M5307C3 board.
+
+config SECUREEDGEMP3
+ bool "SnapGear SecureEdge/MP3 platform support"
+ depends on M5307
+ help
+ Support for the SnapGear SecureEdge/MP3 platform.
+
+config M5329EVB
+ bool "Freescale (Motorola) M5329EVB board support"
+ depends on M532x
+ select FREESCALE
+ help
+ Support for the Freescale (Motorola) M5329EVB board.
+
+config COBRA5329
+ bool "senTec COBRA5329 board support"
+ depends on M532x
+ help
+ Support for the senTec COBRA5329 board.
+
+config M5407C3
+ bool "Motorola M5407C3 board support"
+ depends on M5407
+ select FREESCALE
+ help
+ Support for the Motorola M5407C3 board.
+
+config FIREBEE
+ bool "FireBee board support"
+ depends on M547x
+ help
+ Support for the FireBee ColdFire 5475 based board.
+
+config HW_FEITH
+ bool
+
+config CLEOPATRA
+ bool "Feith CLEOPATRA board support"
+ depends on (M5307 || M5407)
+ select HW_FEITH
+ help
+ Support for the Feith Cleopatra boards.
+
+config CANCam
+ bool "Feith CANCam board support"
+ depends on M5272
+ select HW_FEITH
+ help
+ Support for the Feith CANCam board.
+
+config SCALES
+ bool "Feith SCALES board support"
+ depends on M5272
+ select HW_FEITH
+ help
+ Support for the Feith SCALES board.
+
+config NETtel
+ bool "SecureEdge/NETtel board support"
+ depends on (M5206e || M5272 || M5307)
+ help
+ Support for the SnapGear NETtel/SecureEdge/SnapGear boards.
+
+config SNAPGEAR
+ bool "SnapGear router board support"
+ depends on NETtel
+ help
+ Special additional support for SnapGear router boards.
+
+config SNEHA
+ bool
+
+config CPU16B
+ bool "Sneha Technologies S.L. Sarasvati board support"
+ depends on M5272
+ select SNEHA
+ help
+ Support for the SNEHA CPU16B board.
+
+config MOD5272
+ bool "Netburner MOD-5272 board support"
+ depends on M5272
+ help
+ Support for the Netburner MOD-5272 board.
+
+config SAVANT
+ bool
+
+config SAVANTrosie1
+ bool "Savant Rosie1 board support"
+ depends on M523x
+ select SAVANT
+ help
+ Support for the Savant Rosie1 board.
+
+
+if !MMU || COLDFIRE
+
+comment "Machine Options"
+
+config ROMFS_FROM_ROM
+ bool "ROMFS image not RAM resident"
+ depends on (NETtel || SNAPGEAR)
+ help
+ The ROMfs filesystem will stay resident in the FLASH/ROM, not be
+ moved into RAM.
+
+config UBOOT
+ bool "Support for U-Boot command line parameters"
+ help
+ If you say Y here kernel will try to collect command
+ line parameters from the initial u-boot stack.
+ default n
+
+config 4KSTACKS
+ bool "Use 4Kb for kernel stacks instead of 8Kb"
+ default y
+ help
+ If you say Y here the kernel will use a 4Kb stacksize for the
+ kernel stack attached to each process/thread. This facilitates
+ running more threads on a system and also reduces the pressure
+ on the VM subsystem for higher order allocations.
+
+comment "RAM configuration"
+
+config RAMBASE
+ hex "Address of the base of RAM"
+ default "0"
+ help
+ Define the address that RAM starts at. On many platforms this is
+ 0, the base of the address space. And this is the default. Some
+ platforms choose to setup their RAM at other addresses within the
+ processor address space.
+
+config RAMSIZE
+ hex "Size of RAM (in bytes), or 0 for automatic"
+ default "0x400000"
+ help
+ Define the size of the system RAM. If you select 0 then the
+ kernel will try to probe the RAM size at runtime. This is not
+ supported on all CPU types.
+
+config VECTORBASE
+ hex "Address of the base of system vectors"
+ default "0"
+ help
+ Define the address of the system vectors. Commonly this is
+ put at the start of RAM, but it doesn't have to be. On ColdFire
+ platforms this address is programmed into the VBR register, thus
+ actually setting the address to use.
+
+config MBAR
+ hex "Address of the MBAR (internal peripherals)"
+ default "0x10000000"
+ depends on HAVE_MBAR
+ help
+ Define the address of the internal system peripherals. This value
+ is set in the processors MBAR register. This is generally setup by
+ the boot loader, and will not be written by the kernel. By far most
+ ColdFire boards use the default 0x10000000 value, so if unsure then
+ use this.
+
+config IPSBAR
+ hex "Address of the IPSBAR (internal peripherals)"
+ default "0x40000000"
+ depends on HAVE_IPSBAR
+ help
+ Define the address of the internal system peripherals. This value
+ is set in the processors IPSBAR register. This is generally setup by
+ the boot loader, and will not be written by the kernel. By far most
+ ColdFire boards use the default 0x40000000 value, so if unsure then
+ use this.
+
+config KERNELBASE
+ hex "Address of the base of kernel code"
+ default "0x400"
+ help
+ Typically on m68k systems the kernel will not start at the base
+ of RAM, but usually some small offset from it. Define the start
+ address of the kernel here. The most common setup will have the
+ processor vectors at the base of RAM and then the start of the
+ kernel. On some platforms some RAM is reserved for boot loaders
+ and the kernel starts after that. The 0x400 default was based on
+ a system with the RAM based at address 0, and leaving enough room
+ for the theoretical maximum number of 256 vectors.
+
+choice
+ prompt "RAM bus width"
+ default RAMAUTOBIT
+
+config RAMAUTOBIT
+ bool "AUTO"
+ help
+ Select the physical RAM data bus size. Not needed on most platforms,
+ so you can generally choose AUTO.
+
+config RAM8BIT
+ bool "8bit"
+ help
+ Configure RAM bus to be 8 bits wide.
+
+config RAM16BIT
+ bool "16bit"
+ help
+ Configure RAM bus to be 16 bits wide.
+
+config RAM32BIT
+ bool "32bit"
+ help
+ Configure RAM bus to be 32 bits wide.
+
+endchoice
+
+comment "ROM configuration"
+
+config ROM
+ bool "Specify ROM linker regions"
+ default n
+ help
+ Define a ROM region for the linker script. This creates a kernel
+ that can be stored in flash, with possibly the text, and data
+ regions being copied out to RAM at startup.
+
+config ROMBASE
+ hex "Address of the base of ROM device"
+ default "0"
+ depends on ROM
+ help
+ Define the address that the ROM region starts at. Some platforms
+ use this to set their chip select region accordingly for the boot
+ device.
+
+config ROMVEC
+ hex "Address of the base of the ROM vectors"
+ default "0"
+ depends on ROM
+ help
+ This is almost always the same as the base of the ROM. Since on all
+ 68000 type variants the vectors are at the base of the boot device
+ on system startup.
+
+config ROMVECSIZE
+ hex "Size of ROM vector region (in bytes)"
+ default "0x400"
+ depends on ROM
+ help
+ Define the size of the vector region in ROM. For most 68000
+ variants this would be 0x400 bytes in size. Set to 0 if you do
+ not want a vector region at the start of the ROM.
+
+config ROMSTART
+ hex "Address of the base of system image in ROM"
+ default "0x400"
+ depends on ROM
+ help
+ Define the start address of the system image in ROM. Commonly this
+ is strait after the ROM vectors.
+
+config ROMSIZE
+ hex "Size of the ROM device"
+ default "0x100000"
+ depends on ROM
+ help
+ Size of the ROM device. On some platforms this is used to setup
+ the chip select that controls the boot ROM device.
+
+choice
+ prompt "Kernel executes from"
+ ---help---
+ Choose the memory type that the kernel will be running in.
+
+config RAMKERNEL
+ bool "RAM"
+ help
+ The kernel will be resident in RAM when running.
+
+config ROMKERNEL
+ bool "ROM"
+ help
+ The kernel will be resident in FLASH/ROM when running. This is
+ often referred to as Execute-in-Place (XIP), since the kernel
+ code executes from the position it is stored in the FLASH/ROM.
+
+endchoice
+
+endif