| #ifndef __LINUX_NL80211_H |
| #define __LINUX_NL80211_H |
| /* |
| * 802.11 netlink interface public header |
| * |
| * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> |
| * Copyright 2008 Michael Wu <flamingice@sourmilk.net> |
| * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com> |
| * Copyright 2008 Michael Buesch <mb@bu3sch.de> |
| * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com> |
| * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> |
| * Copyright 2008 Colin McCabe <colin@cozybit.com> |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| * |
| */ |
| |
| #include <linux/types.h> |
| |
| /** |
| * DOC: Station handling |
| * |
| * Stations are added per interface, but a special case exists with VLAN |
| * interfaces. When a station is bound to an AP interface, it may be moved |
| * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). |
| * The station is still assumed to belong to the AP interface it was added |
| * to. |
| * |
| * TODO: need more info? |
| */ |
| |
| /** |
| * DOC: Frame transmission/registration support |
| * |
| * Frame transmission and registration support exists to allow userspace |
| * management entities such as wpa_supplicant react to management frames |
| * that are not being handled by the kernel. This includes, for example, |
| * certain classes of action frames that cannot be handled in the kernel |
| * for various reasons. |
| * |
| * Frame registration is done on a per-interface basis and registrations |
| * cannot be removed other than by closing the socket. It is possible to |
| * specify a registration filter to register, for example, only for a |
| * certain type of action frame. In particular with action frames, those |
| * that userspace registers for will not be returned as unhandled by the |
| * driver, so that the registered application has to take responsibility |
| * for doing that. |
| * |
| * The type of frame that can be registered for is also dependent on the |
| * driver and interface type. The frame types are advertised in wiphy |
| * attributes so applications know what to expect. |
| * |
| * NOTE: When an interface changes type while registrations are active, |
| * these registrations are ignored until the interface type is |
| * changed again. This means that changing the interface type can |
| * lead to a situation that couldn't otherwise be produced, but |
| * any such registrations will be dormant in the sense that they |
| * will not be serviced, i.e. they will not receive any frames. |
| * |
| * Frame transmission allows userspace to send for example the required |
| * responses to action frames. It is subject to some sanity checking, |
| * but many frames can be transmitted. When a frame was transmitted, its |
| * status is indicated to the sending socket. |
| * |
| * For more technical details, see the corresponding command descriptions |
| * below. |
| */ |
| |
| /** |
| * DOC: Virtual interface / concurrency capabilities |
| * |
| * Some devices are able to operate with virtual MACs, they can have |
| * more than one virtual interface. The capability handling for this |
| * is a bit complex though, as there may be a number of restrictions |
| * on the types of concurrency that are supported. |
| * |
| * To start with, each device supports the interface types listed in |
| * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the |
| * types there no concurrency is implied. |
| * |
| * Once concurrency is desired, more attributes must be observed: |
| * To start with, since some interface types are purely managed in |
| * software, like the AP-VLAN type in mac80211 for example, there's |
| * an additional list of these, they can be added at any time and |
| * are only restricted by some semantic restrictions (e.g. AP-VLAN |
| * cannot be added without a corresponding AP interface). This list |
| * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. |
| * |
| * Further, the list of supported combinations is exported. This is |
| * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, |
| * it exports a list of "groups", and at any point in time the |
| * interfaces that are currently active must fall into any one of |
| * the advertised groups. Within each group, there are restrictions |
| * on the number of interfaces of different types that are supported |
| * and also the number of different channels, along with potentially |
| * some other restrictions. See &enum nl80211_if_combination_attrs. |
| * |
| * All together, these attributes define the concurrency of virtual |
| * interfaces that a given device supports. |
| */ |
| |
| /** |
| * enum nl80211_commands - supported nl80211 commands |
| * |
| * @NL80211_CMD_UNSPEC: unspecified command to catch errors |
| * |
| * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request |
| * to get a list of all present wiphys. |
| * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or |
| * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, |
| * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, |
| * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, |
| * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, |
| * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. |
| * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL |
| * instead, the support here is for backward compatibility only. |
| * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request |
| * or rename notification. Has attributes %NL80211_ATTR_WIPHY and |
| * %NL80211_ATTR_WIPHY_NAME. |
| * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes |
| * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. |
| * |
| * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; |
| * either a dump request on a %NL80211_ATTR_WIPHY or a specific get |
| * on an %NL80211_ATTR_IFINDEX is supported. |
| * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires |
| * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. |
| * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response |
| * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, |
| * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also |
| * be sent from userspace to request creation of a new virtual interface, |
| * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and |
| * %NL80211_ATTR_IFNAME. |
| * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes |
| * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from |
| * userspace to request deletion of a virtual interface, then requires |
| * attribute %NL80211_ATTR_IFINDEX. |
| * |
| * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified |
| * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. |
| * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, |
| * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. |
| * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, |
| * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, |
| * and %NL80211_ATTR_KEY_SEQ attributes. |
| * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX |
| * or %NL80211_ATTR_MAC. |
| * |
| * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a |
| * %NL80222_CMD_NEW_BEACON message) |
| * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface |
| * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, |
| * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. |
| * Following attributes are provided for drivers that generate full Beacon |
| * and Probe Response frames internally: %NL80211_ATTR_SSID, |
| * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, |
| * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, |
| * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, |
| * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, |
| * %NL80211_ATTR_IE_ASSOC_RESP. |
| * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, |
| * parameters are like for %NL80211_CMD_SET_BEACON. |
| * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it |
| * |
| * @NL80211_CMD_GET_STATION: Get station attributes for station identified by |
| * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. |
| * @NL80211_CMD_SET_STATION: Set station attributes for station identified by |
| * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. |
| * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the |
| * the interface identified by %NL80211_ATTR_IFINDEX. |
| * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC |
| * or, if no MAC address given, all stations, on the interface identified |
| * by %NL80211_ATTR_IFINDEX. |
| * |
| * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to |
| * destination %NL80211_ATTR_MAC on the interface identified by |
| * %NL80211_ATTR_IFINDEX. |
| * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to |
| * destination %NL80211_ATTR_MAC on the interface identified by |
| * %NL80211_ATTR_IFINDEX. |
| * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by |
| * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. |
| * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by |
| * %NL80211_ATTR_MAC. |
| * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the |
| * the interface identified by %NL80211_ATTR_IFINDEX. |
| * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC |
| * or, if no MAC address given, all mesh paths, on the interface identified |
| * by %NL80211_ATTR_IFINDEX. |
| * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by |
| * %NL80211_ATTR_IFINDEX. |
| * |
| * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set |
| * regulatory domain. |
| * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command |
| * after being queried by the kernel. CRDA replies by sending a regulatory |
| * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our |
| * current alpha2 if it found a match. It also provides |
| * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each |
| * regulatory rule is a nested set of attributes given by |
| * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and |
| * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by |
| * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and |
| * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. |
| * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain |
| * to the specified ISO/IEC 3166-1 alpha2 country code. The core will |
| * store this as a valid request and then query userspace for it. |
| * |
| * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the |
| * interface identified by %NL80211_ATTR_IFINDEX |
| * |
| * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the |
| * interface identified by %NL80211_ATTR_IFINDEX |
| * |
| * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The |
| * interface is identified with %NL80211_ATTR_IFINDEX and the management |
| * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be |
| * added to the end of the specified management frame is specified with |
| * %NL80211_ATTR_IE. If the command succeeds, the requested data will be |
| * added to all specified management frames generated by |
| * kernel/firmware/driver. |
| * Note: This command has been removed and it is only reserved at this |
| * point to avoid re-using existing command number. The functionality this |
| * command was planned for has been provided with cleaner design with the |
| * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, |
| * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, |
| * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. |
| * |
| * @NL80211_CMD_GET_SCAN: get scan results |
| * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters |
| * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to |
| * NL80211_CMD_GET_SCAN and on the "scan" multicast group) |
| * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, |
| * partial scan results may be available |
| * |
| * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain |
| * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL. |
| * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) |
| * are passed, they are used in the probe requests. For |
| * broadcast, a broadcast SSID must be passed (ie. an empty |
| * string). If no SSID is passed, no probe requests are sent and |
| * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES, |
| * if passed, define which channels should be scanned; if not |
| * passed, all channels allowed for the current regulatory domain |
| * are used. Extra IEs can also be passed from the userspace by |
| * using the %NL80211_ATTR_IE attribute. |
| * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan |
| * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan |
| * results available. |
| * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has |
| * stopped. The driver may issue this event at any time during a |
| * scheduled scan. One reason for stopping the scan is if the hardware |
| * does not support starting an association or a normal scan while running |
| * a scheduled scan. This event is also sent when the |
| * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface |
| * is brought down while a scheduled scan was running. |
| * |
| * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation |
| * or noise level |
| * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to |
| * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) |
| * |
| * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain |
| * has been changed and provides details of the request information |
| * that caused the change such as who initiated the regulatory request |
| * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx |
| * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if |
| * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or |
| * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain |
| * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is |
| * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on |
| * to (%NL80211_ATTR_REG_ALPHA2). |
| * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon |
| * has been found while world roaming thus enabling active scan or |
| * any mode of operation that initiates TX (beacons) on a channel |
| * where we would not have been able to do either before. As an example |
| * if you are world roaming (regulatory domain set to world or if your |
| * driver is using a custom world roaming regulatory domain) and while |
| * doing a passive scan on the 5 GHz band you find an AP there (if not |
| * on a DFS channel) you will now be able to actively scan for that AP |
| * or use AP mode on your card on that same channel. Note that this will |
| * never be used for channels 1-11 on the 2 GHz band as they are always |
| * enabled world wide. This beacon hint is only sent if your device had |
| * either disabled active scanning or beaconing on a channel. We send to |
| * userspace the wiphy on which we removed a restriction from |
| * (%NL80211_ATTR_WIPHY) and the channel on which this occurred |
| * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) |
| * the beacon hint was processed. |
| * |
| * @NL80211_CMD_AUTHENTICATE: authentication request and notification. |
| * This command is used both as a command (request to authenticate) and |
| * as an event on the "mlme" multicast group indicating completion of the |
| * authentication process. |
| * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the |
| * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and |
| * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify |
| * the SSID (mainly for association, but is included in authentication |
| * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used |
| * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE |
| * is used to specify the authentication type. %NL80211_ATTR_IE is used to |
| * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) |
| * to be added to the frame. |
| * When used as an event, this reports reception of an Authentication |
| * frame in station and IBSS modes when the local MLME processed the |
| * frame, i.e., it was for the local STA and was received in correct |
| * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the |
| * MLME SAP interface (kernel providing MLME, userspace SME). The |
| * included %NL80211_ATTR_FRAME attribute contains the management frame |
| * (including both the header and frame body, but not FCS). This event is |
| * also used to indicate if the authentication attempt timed out. In that |
| * case the %NL80211_ATTR_FRAME attribute is replaced with a |
| * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which |
| * pending authentication timed out). |
| * @NL80211_CMD_ASSOCIATE: association request and notification; like |
| * NL80211_CMD_AUTHENTICATE but for Association and Reassociation |
| * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, |
| * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). |
| * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like |
| * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to |
| * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication |
| * primitives). |
| * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like |
| * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to |
| * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). |
| * |
| * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael |
| * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the |
| * event includes %NL80211_ATTR_MAC to describe the source MAC address of |
| * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key |
| * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and |
| * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this |
| * event matches with MLME-MICHAELMICFAILURE.indication() primitive |
| * |
| * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a |
| * FREQ attribute (for the initial frequency if no peer can be found) |
| * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those |
| * should be fixed rather than automatically determined. Can only be |
| * executed on a network interface that is UP, and fixed BSSID/FREQ |
| * may be rejected. Another optional parameter is the beacon interval, |
| * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not |
| * given defaults to 100 TU (102.4ms). |
| * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is |
| * determined by the network interface. |
| * |
| * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute |
| * to identify the device, and the TESTDATA blob attribute to pass through |
| * to the driver. |
| * |
| * @NL80211_CMD_CONNECT: connection request and notification; this command |
| * requests to connect to a specified network but without separating |
| * auth and assoc steps. For this, you need to specify the SSID in a |
| * %NL80211_ATTR_SSID attribute, and can optionally specify the association |
| * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, |
| * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, |
| * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and |
| * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. |
| * It is also sent as an event, with the BSSID and response IEs when the |
| * connection is established or failed to be established. This can be |
| * determined by the STATUS_CODE attribute. |
| * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), |
| * sent as an event when the card/driver roamed by itself. |
| * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify |
| * userspace that a connection was dropped by the AP or due to other |
| * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and |
| * %NL80211_ATTR_REASON_CODE attributes are used. |
| * |
| * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices |
| * associated with this wiphy must be down and will follow. |
| * |
| * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified |
| * channel for the specified amount of time. This can be used to do |
| * off-channel operations like transmit a Public Action frame and wait for |
| * a response while being associated to an AP on another channel. |
| * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus |
| * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the |
| * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be |
| * optionally used to specify additional channel parameters. |
| * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds |
| * to remain on the channel. This command is also used as an event to |
| * notify when the requested duration starts (it may take a while for the |
| * driver to schedule this time due to other concurrent needs for the |
| * radio). |
| * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) |
| * that will be included with any events pertaining to this request; |
| * the cookie is also used to cancel the request. |
| * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a |
| * pending remain-on-channel duration if the desired operation has been |
| * completed prior to expiration of the originally requested duration. |
| * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the |
| * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to |
| * uniquely identify the request. |
| * This command is also used as an event to notify when a requested |
| * remain-on-channel duration has expired. |
| * |
| * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX |
| * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface |
| * and @NL80211_ATTR_TX_RATES the set of allowed rates. |
| * |
| * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames |
| * (via @NL80211_CMD_FRAME) for processing in userspace. This command |
| * requires an interface index, a frame type attribute (optional for |
| * backward compatibility reasons, if not given assumes action frames) |
| * and a match attribute containing the first few bytes of the frame |
| * that should match, e.g. a single byte for only a category match or |
| * four bytes for vendor frames including the OUI. The registration |
| * cannot be dropped, but is removed automatically when the netlink |
| * socket is closed. Multiple registrations can be made. |
| * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for |
| * backward compatibility |
| * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This |
| * command is used both as a request to transmit a management frame and |
| * as an event indicating reception of a frame that was not processed in |
| * kernel code, but is for us (i.e., which may need to be processed in a |
| * user space application). %NL80211_ATTR_FRAME is used to specify the |
| * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and |
| * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on |
| * which channel the frame is to be transmitted or was received. If this |
| * channel is not the current channel (remain-on-channel or the |
| * operational channel) the device will switch to the given channel and |
| * transmit the frame, optionally waiting for a response for the time |
| * specified using %NL80211_ATTR_DURATION. When called, this operation |
| * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the |
| * TX status event pertaining to the TX request. |
| * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this |
| * command may be used with the corresponding cookie to cancel the wait |
| * time if it is known that it is no longer necessary. |
| * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. |
| * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame |
| * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies |
| * the TX command and %NL80211_ATTR_FRAME includes the contents of the |
| * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged |
| * the frame. |
| * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for |
| * backward compatibility. |
| * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command |
| * is used to configure connection quality monitoring notification trigger |
| * levels. |
| * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This |
| * command is used as an event to indicate the that a trigger level was |
| * reached. |
| * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ |
| * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed |
| * by %NL80211_ATTR_IFINDEX) shall operate on. |
| * In case multiple channels are supported by the device, the mechanism |
| * with which it switches channels is implementation-defined. |
| * When a monitor interface is given, it can only switch channel while |
| * no other interfaces are operating to avoid disturbing the operation |
| * of any other interfaces, and other interfaces will again take |
| * precedence when they are used. |
| * |
| * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. |
| * |
| * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial |
| * mesh config parameters may be given. |
| * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the |
| * network is determined by the network interface. |
| * |
| * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame |
| * notification. This event is used to indicate that an unprotected |
| * deauthentication frame was dropped when MFP is in use. |
| * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame |
| * notification. This event is used to indicate that an unprotected |
| * disassociation frame was dropped when MFP is in use. |
| * |
| * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a |
| * beacon or probe response from a compatible mesh peer. This is only |
| * sent while no station information (sta_info) exists for the new peer |
| * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On |
| * reception of this notification, userspace may decide to create a new |
| * station (@NL80211_CMD_NEW_STATION). To stop this notification from |
| * reoccurring, the userspace authentication daemon may want to create the |
| * new station with the AUTHENTICATED flag unset and maybe change it later |
| * depending on the authentication result. |
| * |
| * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. |
| * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. |
| * Since wireless is more complex than wired ethernet, it supports |
| * various triggers. These triggers can be configured through this |
| * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For |
| * more background information, see |
| * http://wireless.kernel.org/en/users/Documentation/WoWLAN. |
| * |
| * @NL80211_CMD_MAX: highest used command number |
| * @__NL80211_CMD_AFTER_LAST: internal use |
| */ |
| enum nl80211_commands { |
| /* don't change the order or add anything between, this is ABI! */ |
| NL80211_CMD_UNSPEC, |
| |
| NL80211_CMD_GET_WIPHY, /* can dump */ |
| NL80211_CMD_SET_WIPHY, |
| NL80211_CMD_NEW_WIPHY, |
| NL80211_CMD_DEL_WIPHY, |
| |
| NL80211_CMD_GET_INTERFACE, /* can dump */ |
| NL80211_CMD_SET_INTERFACE, |
| NL80211_CMD_NEW_INTERFACE, |
| NL80211_CMD_DEL_INTERFACE, |
| |
| NL80211_CMD_GET_KEY, |
| NL80211_CMD_SET_KEY, |
| NL80211_CMD_NEW_KEY, |
| NL80211_CMD_DEL_KEY, |
| |
| NL80211_CMD_GET_BEACON, |
| NL80211_CMD_SET_BEACON, |
| NL80211_CMD_NEW_BEACON, |
| NL80211_CMD_DEL_BEACON, |
| |
| NL80211_CMD_GET_STATION, |
| NL80211_CMD_SET_STATION, |
| NL80211_CMD_NEW_STATION, |
| NL80211_CMD_DEL_STATION, |
| |
| NL80211_CMD_GET_MPATH, |
| NL80211_CMD_SET_MPATH, |
| NL80211_CMD_NEW_MPATH, |
| NL80211_CMD_DEL_MPATH, |
| |
| NL80211_CMD_SET_BSS, |
| |
| NL80211_CMD_SET_REG, |
| NL80211_CMD_REQ_SET_REG, |
| |
| NL80211_CMD_GET_MESH_CONFIG, |
| NL80211_CMD_SET_MESH_CONFIG, |
| |
| NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, |
| |
| NL80211_CMD_GET_REG, |
| |
| NL80211_CMD_GET_SCAN, |
| NL80211_CMD_TRIGGER_SCAN, |
| NL80211_CMD_NEW_SCAN_RESULTS, |
| NL80211_CMD_SCAN_ABORTED, |
| |
| NL80211_CMD_REG_CHANGE, |
| |
| NL80211_CMD_AUTHENTICATE, |
| NL80211_CMD_ASSOCIATE, |
| NL80211_CMD_DEAUTHENTICATE, |
| NL80211_CMD_DISASSOCIATE, |
| |
| NL80211_CMD_MICHAEL_MIC_FAILURE, |
| |
| NL80211_CMD_REG_BEACON_HINT, |
| |
| NL80211_CMD_JOIN_IBSS, |
| NL80211_CMD_LEAVE_IBSS, |
| |
| NL80211_CMD_TESTMODE, |
| |
| NL80211_CMD_CONNECT, |
| NL80211_CMD_ROAM, |
| NL80211_CMD_DISCONNECT, |
| |
| NL80211_CMD_SET_WIPHY_NETNS, |
| |
| NL80211_CMD_GET_SURVEY, |
| NL80211_CMD_NEW_SURVEY_RESULTS, |
| |
| NL80211_CMD_SET_PMKSA, |
| NL80211_CMD_DEL_PMKSA, |
| NL80211_CMD_FLUSH_PMKSA, |
| |
| NL80211_CMD_REMAIN_ON_CHANNEL, |
| NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, |
| |
| NL80211_CMD_SET_TX_BITRATE_MASK, |
| |
| NL80211_CMD_REGISTER_FRAME, |
| NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, |
| NL80211_CMD_FRAME, |
| NL80211_CMD_ACTION = NL80211_CMD_FRAME, |
| NL80211_CMD_FRAME_TX_STATUS, |
| NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, |
| |
| NL80211_CMD_SET_POWER_SAVE, |
| NL80211_CMD_GET_POWER_SAVE, |
| |
| NL80211_CMD_SET_CQM, |
| NL80211_CMD_NOTIFY_CQM, |
| |
| NL80211_CMD_SET_CHANNEL, |
| NL80211_CMD_SET_WDS_PEER, |
| |
| NL80211_CMD_FRAME_WAIT_CANCEL, |
| |
| NL80211_CMD_JOIN_MESH, |
| NL80211_CMD_LEAVE_MESH, |
| |
| NL80211_CMD_UNPROT_DEAUTHENTICATE, |
| NL80211_CMD_UNPROT_DISASSOCIATE, |
| |
| NL80211_CMD_NEW_PEER_CANDIDATE, |
| |
| NL80211_CMD_GET_WOWLAN, |
| NL80211_CMD_SET_WOWLAN, |
| |
| NL80211_CMD_START_SCHED_SCAN, |
| NL80211_CMD_STOP_SCHED_SCAN, |
| NL80211_CMD_SCHED_SCAN_RESULTS, |
| NL80211_CMD_SCHED_SCAN_STOPPED, |
| |
| /* add new commands above here */ |
| |
| /* used to define NL80211_CMD_MAX below */ |
| __NL80211_CMD_AFTER_LAST, |
| NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 |
| }; |
| |
| /* |
| * Allow user space programs to use #ifdef on new commands by defining them |
| * here |
| */ |
| #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS |
| #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE |
| #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE |
| #define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE |
| #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE |
| #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE |
| #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE |
| #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT |
| |
| /* source-level API compatibility */ |
| #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG |
| #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG |
| #define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE |
| |
| /** |
| * enum nl80211_attrs - nl80211 netlink attributes |
| * |
| * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors |
| * |
| * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. |
| * /sys/class/ieee80211/<phyname>/index |
| * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) |
| * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters |
| * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz |
| * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ |
| * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): |
| * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including |
| * this attribute) |
| * NL80211_CHAN_HT20 = HT20 only |
| * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel |
| * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel |
| * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is |
| * less than or equal to the RTS threshold; allowed range: 1..255; |
| * dot11ShortRetryLimit; u8 |
| * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is |
| * greater than the RTS threshold; allowed range: 1..255; |
| * dot11ShortLongLimit; u8 |
| * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum |
| * length in octets for frames; allowed range: 256..8000, disable |
| * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 |
| * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length |
| * larger than or equal to this use RTS/CTS handshake); allowed range: |
| * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 |
| * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 |
| * section 7.3.2.9; dot11CoverageClass; u8 |
| * |
| * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on |
| * @NL80211_ATTR_IFNAME: network interface name |
| * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype |
| * |
| * @NL80211_ATTR_MAC: MAC address (various uses) |
| * |
| * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of |
| * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC |
| * keys |
| * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) |
| * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 |
| * section 7.3.2.25.1, e.g. 0x000FAC04) |
| * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and |
| * CCMP keys, each six bytes in little endian |
| * |
| * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU |
| * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing |
| * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE |
| * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE |
| * |
| * @NL80211_ATTR_STA_AID: Association ID for the station (u16) |
| * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of |
| * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) |
| * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by |
| * IEEE 802.11 7.3.1.6 (u16). |
| * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported |
| * rates as defined by IEEE 802.11 7.3.2.2 but without the length |
| * restriction (at most %NL80211_MAX_SUPP_RATES). |
| * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station |
| * to, or the AP interface the station was originally added to to. |
| * @NL80211_ATTR_STA_INFO: information about a station, part of station info |
| * given for %NL80211_CMD_GET_STATION, nested attribute containing |
| * info as possible, see &enum nl80211_sta_info. |
| * |
| * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, |
| * consisting of a nested array. |
| * |
| * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). |
| * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link. |
| * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. |
| * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path |
| * info given for %NL80211_CMD_GET_MPATH, nested attribute described at |
| * &enum nl80211_mpath_info. |
| * |
| * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of |
| * &enum nl80211_mntr_flags. |
| * |
| * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the |
| * current regulatory domain should be set to or is already set to. |
| * For example, 'CR', for Costa Rica. This attribute is used by the kernel |
| * to query the CRDA to retrieve one regulatory domain. This attribute can |
| * also be used by userspace to query the kernel for the currently set |
| * regulatory domain. We chose an alpha2 as that is also used by the |
| * IEEE-802.11d country information element to identify a country. |
| * Users can also simply ask the wireless core to set regulatory domain |
| * to a specific alpha2. |
| * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory |
| * rules. |
| * |
| * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) |
| * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled |
| * (u8, 0 or 1) |
| * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled |
| * (u8, 0 or 1) |
| * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic |
| * rates in format defined by IEEE 802.11 7.3.2.2 but without the length |
| * restriction (at most %NL80211_MAX_SUPP_RATES). |
| * |
| * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from |
| * association request when used with NL80211_CMD_NEW_STATION) |
| * |
| * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all |
| * supported interface types, each a flag attribute with the number |
| * of the interface mode. |
| * |
| * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for |
| * %NL80211_CMD_SET_MGMT_EXTRA_IE. |
| * |
| * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with |
| * %NL80211_CMD_SET_MGMT_EXTRA_IE). |
| * |
| * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with |
| * a single scan request, a wiphy attribute. |
| * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can |
| * scan with a single scheduled scan request, a wiphy attribute. |
| * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements |
| * that can be added to a scan request |
| * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information |
| * elements that can be added to a scheduled scan request |
| * |
| * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) |
| * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive |
| * scanning and include a zero-length SSID (wildcard) for wildcard scan |
| * @NL80211_ATTR_BSS: scan result BSS |
| * |
| * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain |
| * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* |
| * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently |
| * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) |
| * |
| * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies |
| * an array of command numbers (i.e. a mapping index to command number) |
| * that the driver for the given wiphy supports. |
| * |
| * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header |
| * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and |
| * NL80211_CMD_ASSOCIATE events |
| * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) |
| * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, |
| * represented as a u32 |
| * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and |
| * %NL80211_CMD_DISASSOCIATE, u16 |
| * |
| * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as |
| * a u32 |
| * |
| * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change |
| * due to considerations from a beacon hint. This attribute reflects |
| * the state of the channel _before_ the beacon hint processing. This |
| * attributes consists of a nested attribute containing |
| * NL80211_FREQUENCY_ATTR_* |
| * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change |
| * due to considerations from a beacon hint. This attribute reflects |
| * the state of the channel _after_ the beacon hint processing. This |
| * attributes consists of a nested attribute containing |
| * NL80211_FREQUENCY_ATTR_* |
| * |
| * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported |
| * cipher suites |
| * |
| * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look |
| * for other networks on different channels |
| * |
| * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this |
| * is used, e.g., with %NL80211_CMD_AUTHENTICATE event |
| * |
| * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is |
| * used for the association (&enum nl80211_mfp, represented as a u32); |
| * this attribute can be used |
| * with %NL80211_CMD_ASSOCIATE request |
| * |
| * @NL80211_ATTR_STA_FLAGS2: Attribute containing a |
| * &struct nl80211_sta_flag_update. |
| * |
| * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls |
| * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in |
| * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE |
| * request, the driver will assume that the port is unauthorized until |
| * authorized by user space. Otherwise, port is marked authorized by |
| * default in station mode. |
| * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the |
| * ethertype that will be used for key negotiation. It can be |
| * specified with the associate and connect commands. If it is not |
| * specified, the value defaults to 0x888E (PAE, 802.1X). This |
| * attribute is also used as a flag in the wiphy information to |
| * indicate that protocols other than PAE are supported. |
| * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with |
| * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom |
| * ethertype frames used for key negotiation must not be encrypted. |
| * |
| * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. |
| * We recommend using nested, driver-specific attributes within this. |
| * |
| * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT |
| * event was due to the AP disconnecting the station, and not due to |
| * a local disconnect request. |
| * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT |
| * event (u16) |
| * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating |
| * that protected APs should be used. This is also used with NEW_BEACON to |
| * indicate that the BSS is to use protection. |
| * |
| * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON |
| * to indicate which unicast key ciphers will be used with the connection |
| * (an array of u32). |
| * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to |
| * indicate which group key cipher will be used with the connection (a |
| * u32). |
| * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to |
| * indicate which WPA version(s) the AP we want to associate with is using |
| * (a u32 with flags from &enum nl80211_wpa_versions). |
| * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to |
| * indicate which key management algorithm(s) to use (an array of u32). |
| * |
| * @NL80211_ATTR_REQ_IE: (Re)association request information elements as |
| * sent out by the card, for ROAM and successful CONNECT events. |
| * @NL80211_ATTR_RESP_IE: (Re)association response information elements as |
| * sent by peer, for ROAM and successful CONNECT events. |
| * |
| * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE |
| * commands to specify using a reassociate frame |
| * |
| * @NL80211_ATTR_KEY: key information in a nested attribute with |
| * %NL80211_KEY_* sub-attributes |
| * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() |
| * and join_ibss(), key information is in a nested attribute each |
| * with %NL80211_KEY_* sub-attributes |
| * |
| * @NL80211_ATTR_PID: Process ID of a network namespace. |
| * |
| * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for |
| * dumps. This number increases whenever the object list being |
| * dumped changes, and as such userspace can verify that it has |
| * obtained a complete and consistent snapshot by verifying that |
| * all dump messages contain the same generation number. If it |
| * changed then the list changed and the dump should be repeated |
| * completely from scratch. |
| * |
| * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface |
| * |
| * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of |
| * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute |
| * containing info as possible, see &enum survey_info. |
| * |
| * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. |
| * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can |
| * cache, a wiphy attribute. |
| * |
| * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. |
| * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that |
| * specifies the maximum duration that can be requested with the |
| * remain-on-channel operation, in milliseconds, u32. |
| * |
| * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. |
| * |
| * @NL80211_ATTR_TX_RATES: Nested set of attributes |
| * (enum nl80211_tx_rate_attributes) describing TX rates per band. The |
| * enum nl80211_band value is used as the index (nla_type() of the nested |
| * data. If a band is not included, it will be configured to allow all |
| * rates based on negotiated supported rates information. This attribute |
| * is used with %NL80211_CMD_SET_TX_BITRATE_MASK. |
| * |
| * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain |
| * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. |
| * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the |
| * @NL80211_CMD_REGISTER_FRAME command. |
| * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a |
| * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing |
| * information about which frame types can be transmitted with |
| * %NL80211_CMD_FRAME. |
| * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a |
| * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing |
| * information about which frame types can be registered for RX. |
| * |
| * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was |
| * acknowledged by the recipient. |
| * |
| * @NL80211_ATTR_CQM: connection quality monitor configuration in a |
| * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. |
| * |
| * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command |
| * is requesting a local authentication/association state change without |
| * invoking actual management frame exchange. This can be used with |
| * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, |
| * NL80211_CMD_DISASSOCIATE. |
| * |
| * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations |
| * connected to this BSS. |
| * |
| * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See |
| * &enum nl80211_tx_power_setting for possible values. |
| * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. |
| * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING |
| * for non-automatic settings. |
| * |
| * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly |
| * means support for per-station GTKs. |
| * |
| * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. |
| * This can be used to mask out antennas which are not attached or should |
| * not be used for transmitting. If an antenna is not selected in this |
| * bitmap the hardware is not allowed to transmit on this antenna. |
| * |
| * Each bit represents one antenna, starting with antenna 1 at the first |
| * bit. Depending on which antennas are selected in the bitmap, 802.11n |
| * drivers can derive which chainmasks to use (if all antennas belonging to |
| * a particular chain are disabled this chain should be disabled) and if |
| * a chain has diversity antennas wether diversity should be used or not. |
| * HT capabilities (STBC, TX Beamforming, Antenna selection) can be |
| * derived from the available chains after applying the antenna mask. |
| * Non-802.11n drivers can derive wether to use diversity or not. |
| * Drivers may reject configurations or RX/TX mask combinations they cannot |
| * support by returning -EINVAL. |
| * |
| * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. |
| * This can be used to mask out antennas which are not attached or should |
| * not be used for receiving. If an antenna is not selected in this bitmap |
| * the hardware should not be configured to receive on this antenna. |
| * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. |
| * |
| * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available |
| * for configuration as TX antennas via the above parameters. |
| * |
| * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available |
| * for configuration as RX antennas via the above parameters. |
| * |
| * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS |
| * |
| * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be |
| * transmitted on another channel when the channel given doesn't match |
| * the current channel. If the current channel doesn't match and this |
| * flag isn't set, the frame will be rejected. This is also used as an |
| * nl80211 capability flag. |
| * |
| * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16) |
| * |
| * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags |
| * attributes, specifying what a key should be set as default as. |
| * See &enum nl80211_key_default_types. |
| * |
| * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be |
| * changed once the mesh is active. |
| * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute |
| * containing attributes from &enum nl80211_meshconf_params. |
| * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver |
| * allows auth frames in a mesh to be passed to userspace for processing via |
| * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. |
| * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as |
| * defined in &enum nl80211_plink_state. Used when userspace is |
| * driving the peer link management state machine. |
| * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled. |
| * |
| * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities, |
| * the supported WoWLAN triggers |
| * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to |
| * indicate which WoW triggers should be enabled. This is also |
| * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN |
| * triggers. |
| |
| * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan |
| * cycles, in msecs. |
| * |
| * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported |
| * interface combinations. In each nested item, it contains attributes |
| * defined in &enum nl80211_if_combination_attrs. |
| * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like |
| * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that |
| * are managed in software: interfaces of these types aren't subject to |
| * any restrictions in their number or combinations. |
| * |
| * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information |
| * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. |
| * |
| * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in |
| * scan, nested array attribute containing an entry for each band, with |
| * the entry being a list of supported rates as defined by IEEE 802.11 |
| * 7.3.2.2 but without the length restriction |
| * (at most %NL80211_MAX_SUPP_RATES). |
| * |
| * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon |
| * and Probe Response (when response to wildcard Probe Request); see |
| * &enum nl80211_hidden_ssid, represented as a u32 |
| * |
| * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. |
| * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to |
| * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the |
| * driver (or firmware) replies to Probe Request frames. |
| * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association |
| * Response frames. This is used with %NL80211_CMD_NEW_BEACON and |
| * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into |
| * (Re)Association Response frames when the driver (or firmware) replies to |
| * (Re)Association Request frames. |
| * |
| * @NL80211_ATTR_MAX: highest attribute number currently defined |
| * @__NL80211_ATTR_AFTER_LAST: internal use |
| */ |
| enum nl80211_attrs { |
| /* don't change the order or add anything between, this is ABI! */ |
| NL80211_ATTR_UNSPEC, |
| |
| NL80211_ATTR_WIPHY, |
| NL80211_ATTR_WIPHY_NAME, |
| |
| NL80211_ATTR_IFINDEX, |
| NL80211_ATTR_IFNAME, |
| NL80211_ATTR_IFTYPE, |
| |
| NL80211_ATTR_MAC, |
| |
| NL80211_ATTR_KEY_DATA, |
| NL80211_ATTR_KEY_IDX, |
| NL80211_ATTR_KEY_CIPHER, |
| NL80211_ATTR_KEY_SEQ, |
| NL80211_ATTR_KEY_DEFAULT, |
| |
| NL80211_ATTR_BEACON_INTERVAL, |
| NL80211_ATTR_DTIM_PERIOD, |
| NL80211_ATTR_BEACON_HEAD, |
| NL80211_ATTR_BEACON_TAIL, |
| |
| NL80211_ATTR_STA_AID, |
| NL80211_ATTR_STA_FLAGS, |
| NL80211_ATTR_STA_LISTEN_INTERVAL, |
| NL80211_ATTR_STA_SUPPORTED_RATES, |
| NL80211_ATTR_STA_VLAN, |
| NL80211_ATTR_STA_INFO, |
| |
| NL80211_ATTR_WIPHY_BANDS, |
| |
| NL80211_ATTR_MNTR_FLAGS, |
| |
| NL80211_ATTR_MESH_ID, |
| NL80211_ATTR_STA_PLINK_ACTION, |
| NL80211_ATTR_MPATH_NEXT_HOP, |
| NL80211_ATTR_MPATH_INFO, |
| |
| NL80211_ATTR_BSS_CTS_PROT, |
| NL80211_ATTR_BSS_SHORT_PREAMBLE, |
| NL80211_ATTR_BSS_SHORT_SLOT_TIME, |
| |
| NL80211_ATTR_HT_CAPABILITY, |
| |
| NL80211_ATTR_SUPPORTED_IFTYPES, |
| |
| NL80211_ATTR_REG_ALPHA2, |
| NL80211_ATTR_REG_RULES, |
| |
| NL80211_ATTR_MESH_CONFIG, |
| |
| NL80211_ATTR_BSS_BASIC_RATES, |
| |
| NL80211_ATTR_WIPHY_TXQ_PARAMS, |
| NL80211_ATTR_WIPHY_FREQ, |
| NL80211_ATTR_WIPHY_CHANNEL_TYPE, |
| |
| NL80211_ATTR_KEY_DEFAULT_MGMT, |
| |
| NL80211_ATTR_MGMT_SUBTYPE, |
| NL80211_ATTR_IE, |
| |
| NL80211_ATTR_MAX_NUM_SCAN_SSIDS, |
| |
| NL80211_ATTR_SCAN_FREQUENCIES, |
| NL80211_ATTR_SCAN_SSIDS, |
| NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ |
| NL80211_ATTR_BSS, |
| |
| NL80211_ATTR_REG_INITIATOR, |
| NL80211_ATTR_REG_TYPE, |
| |
| NL80211_ATTR_SUPPORTED_COMMANDS, |
| |
| NL80211_ATTR_FRAME, |
| NL80211_ATTR_SSID, |
| NL80211_ATTR_AUTH_TYPE, |
| NL80211_ATTR_REASON_CODE, |
| |
| NL80211_ATTR_KEY_TYPE, |
| |
| NL80211_ATTR_MAX_SCAN_IE_LEN, |
| NL80211_ATTR_CIPHER_SUITES, |
| |
| NL80211_ATTR_FREQ_BEFORE, |
| NL80211_ATTR_FREQ_AFTER, |
| |
| NL80211_ATTR_FREQ_FIXED, |
| |
| |
| NL80211_ATTR_WIPHY_RETRY_SHORT, |
| NL80211_ATTR_WIPHY_RETRY_LONG, |
| NL80211_ATTR_WIPHY_FRAG_THRESHOLD, |
| NL80211_ATTR_WIPHY_RTS_THRESHOLD, |
| |
| NL80211_ATTR_TIMED_OUT, |
| |
| NL80211_ATTR_USE_MFP, |
| |
| NL80211_ATTR_STA_FLAGS2, |
| |
| NL80211_ATTR_CONTROL_PORT, |
| |
| NL80211_ATTR_TESTDATA, |
| |
| NL80211_ATTR_PRIVACY, |
| |
| NL80211_ATTR_DISCONNECTED_BY_AP, |
| NL80211_ATTR_STATUS_CODE, |
| |
| NL80211_ATTR_CIPHER_SUITES_PAIRWISE, |
| NL80211_ATTR_CIPHER_SUITE_GROUP, |
| NL80211_ATTR_WPA_VERSIONS, |
| NL80211_ATTR_AKM_SUITES, |
| |
| NL80211_ATTR_REQ_IE, |
| NL80211_ATTR_RESP_IE, |
| |
| NL80211_ATTR_PREV_BSSID, |
| |
| NL80211_ATTR_KEY, |
| NL80211_ATTR_KEYS, |
| |
| NL80211_ATTR_PID, |
| |
| NL80211_ATTR_4ADDR, |
| |
| NL80211_ATTR_SURVEY_INFO, |
| |
| NL80211_ATTR_PMKID, |
| NL80211_ATTR_MAX_NUM_PMKIDS, |
| |
| NL80211_ATTR_DURATION, |
| |
| NL80211_ATTR_COOKIE, |
| |
| NL80211_ATTR_WIPHY_COVERAGE_CLASS, |
| |
| NL80211_ATTR_TX_RATES, |
| |
| NL80211_ATTR_FRAME_MATCH, |
| |
| NL80211_ATTR_ACK, |
| |
| NL80211_ATTR_PS_STATE, |
| |
| NL80211_ATTR_CQM, |
| |
| NL80211_ATTR_LOCAL_STATE_CHANGE, |
| |
| NL80211_ATTR_AP_ISOLATE, |
| |
| NL80211_ATTR_WIPHY_TX_POWER_SETTING, |
| NL80211_ATTR_WIPHY_TX_POWER_LEVEL, |
| |
| NL80211_ATTR_TX_FRAME_TYPES, |
| NL80211_ATTR_RX_FRAME_TYPES, |
| NL80211_ATTR_FRAME_TYPE, |
| |
| NL80211_ATTR_CONTROL_PORT_ETHERTYPE, |
| NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, |
| |
| NL80211_ATTR_SUPPORT_IBSS_RSN, |
| |
| NL80211_ATTR_WIPHY_ANTENNA_TX, |
| NL80211_ATTR_WIPHY_ANTENNA_RX, |
| |
| NL80211_ATTR_MCAST_RATE, |
| |
| NL80211_ATTR_OFFCHANNEL_TX_OK, |
| |
| NL80211_ATTR_BSS_HT_OPMODE, |
| |
| NL80211_ATTR_KEY_DEFAULT_TYPES, |
| |
| NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, |
| |
| NL80211_ATTR_MESH_SETUP, |
| |
| NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, |
| NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, |
| |
| NL80211_ATTR_SUPPORT_MESH_AUTH, |
| NL80211_ATTR_STA_PLINK_STATE, |
| |
| NL80211_ATTR_WOWLAN_TRIGGERS, |
| NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, |
| |
| NL80211_ATTR_SCHED_SCAN_INTERVAL, |
| |
| NL80211_ATTR_INTERFACE_COMBINATIONS, |
| NL80211_ATTR_SOFTWARE_IFTYPES, |
| |
| NL80211_ATTR_REKEY_DATA, |
| |
| NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, |
| NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, |
| |
| NL80211_ATTR_SCAN_SUPP_RATES, |
| |
| NL80211_ATTR_HIDDEN_SSID, |
| |
| NL80211_ATTR_IE_PROBE_RESP, |
| NL80211_ATTR_IE_ASSOC_RESP, |
| |
| /* add attributes here, update the policy in nl80211.c */ |
| |
| __NL80211_ATTR_AFTER_LAST, |
| NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 |
| }; |
| |
| /* source-level API compatibility */ |
| #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION |
| #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG |
| |
| /* |
| * Allow user space programs to use #ifdef on new attributes by defining them |
| * here |
| */ |
| #define NL80211_CMD_CONNECT NL80211_CMD_CONNECT |
| #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY |
| #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES |
| #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS |
| #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ |
| #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE |
| #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE |
| #define NL80211_ATTR_IE NL80211_ATTR_IE |
| #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR |
| #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE |
| #define NL80211_ATTR_FRAME NL80211_ATTR_FRAME |
| #define NL80211_ATTR_SSID NL80211_ATTR_SSID |
| #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE |
| #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE |
| #define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE |
| #define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP |
| #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS |
| #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES |
| #define NL80211_ATTR_KEY NL80211_ATTR_KEY |
| #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS |
| |
| #define NL80211_MAX_SUPP_RATES 32 |
| #define NL80211_MAX_SUPP_REG_RULES 32 |
| #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 |
| #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 |
| #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 |
| #define NL80211_HT_CAPABILITY_LEN 26 |
| |
| #define NL80211_MAX_NR_CIPHER_SUITES 5 |
| #define NL80211_MAX_NR_AKM_SUITES 2 |
| |
| /** |
| * enum nl80211_iftype - (virtual) interface types |
| * |
| * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides |
| * @NL80211_IFTYPE_ADHOC: independent BSS member |
| * @NL80211_IFTYPE_STATION: managed BSS member |
| * @NL80211_IFTYPE_AP: access point |
| * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces |
| * are a bit special in that they must always be tied to a pre-existing |
| * AP type interface. |
| * @NL80211_IFTYPE_WDS: wireless distribution interface |
| * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames |
| * @NL80211_IFTYPE_MESH_POINT: mesh point |
| * @NL80211_IFTYPE_P2P_CLIENT: P2P client |
| * @NL80211_IFTYPE_P2P_GO: P2P group owner |
| * @NL80211_IFTYPE_MAX: highest interface type number currently defined |
| * @NUM_NL80211_IFTYPES: number of defined interface types |
| * |
| * These values are used with the %NL80211_ATTR_IFTYPE |
| * to set the type of an interface. |
| * |
| */ |
| enum nl80211_iftype { |
| NL80211_IFTYPE_UNSPECIFIED, |
| NL80211_IFTYPE_ADHOC, |
| NL80211_IFTYPE_STATION, |
| NL80211_IFTYPE_AP, |
| NL80211_IFTYPE_AP_VLAN, |
| NL80211_IFTYPE_WDS, |
| NL80211_IFTYPE_MONITOR, |
| NL80211_IFTYPE_MESH_POINT, |
| NL80211_IFTYPE_P2P_CLIENT, |
| NL80211_IFTYPE_P2P_GO, |
| |
| /* keep last */ |
| NUM_NL80211_IFTYPES, |
| NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 |
| }; |
| |
| /** |
| * enum nl80211_sta_flags - station flags |
| * |
| * Station flags. When a station is added to an AP interface, it is |
| * assumed to be already associated (and hence authenticated.) |
| * |
| * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved |
| * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) |
| * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames |
| * with short barker preamble |
| * @NL80211_STA_FLAG_WME: station is WME/QoS capable |
| * @NL80211_STA_FLAG_MFP: station uses management frame protection |
| * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated |
| * @NL80211_STA_FLAG_MAX: highest station flag number currently defined |
| * @__NL80211_STA_FLAG_AFTER_LAST: internal use |
| */ |
| enum nl80211_sta_flags { |
| __NL80211_STA_FLAG_INVALID, |
| NL80211_STA_FLAG_AUTHORIZED, |
| NL80211_STA_FLAG_SHORT_PREAMBLE, |
| NL80211_STA_FLAG_WME, |
| NL80211_STA_FLAG_MFP, |
| NL80211_STA_FLAG_AUTHENTICATED, |
| |
| /* keep last */ |
| __NL80211_STA_FLAG_AFTER_LAST, |
| NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * struct nl80211_sta_flag_update - station flags mask/set |
| * @mask: mask of station flags to set |
| * @set: which values to set them to |
| * |
| * Both mask and set contain bits as per &enum nl80211_sta_flags. |
| */ |
| struct nl80211_sta_flag_update { |
| __u32 mask; |
| __u32 set; |
| } __attribute__((packed)); |
| |
| /** |
| * enum nl80211_rate_info - bitrate information |
| * |
| * These attribute types are used with %NL80211_STA_INFO_TXRATE |
| * when getting information about the bitrate of a station. |
| * |
| * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved |
| * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) |
| * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) |
| * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate |
| * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval |
| * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined |
| * @__NL80211_RATE_INFO_AFTER_LAST: internal use |
| */ |
| enum nl80211_rate_info { |
| __NL80211_RATE_INFO_INVALID, |
| NL80211_RATE_INFO_BITRATE, |
| NL80211_RATE_INFO_MCS, |
| NL80211_RATE_INFO_40_MHZ_WIDTH, |
| NL80211_RATE_INFO_SHORT_GI, |
| |
| /* keep last */ |
| __NL80211_RATE_INFO_AFTER_LAST, |
| NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_sta_bss_param - BSS information collected by STA |
| * |
| * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM |
| * when getting information about the bitrate of a station. |
| * |
| * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved |
| * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) |
| * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled |
| * (flag) |
| * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled |
| * (flag) |
| * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) |
| * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) |
| * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined |
| * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use |
| */ |
| enum nl80211_sta_bss_param { |
| __NL80211_STA_BSS_PARAM_INVALID, |
| NL80211_STA_BSS_PARAM_CTS_PROT, |
| NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, |
| NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, |
| NL80211_STA_BSS_PARAM_DTIM_PERIOD, |
| NL80211_STA_BSS_PARAM_BEACON_INTERVAL, |
| |
| /* keep last */ |
| __NL80211_STA_BSS_PARAM_AFTER_LAST, |
| NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_sta_info - station information |
| * |
| * These attribute types are used with %NL80211_ATTR_STA_INFO |
| * when getting information about a station. |
| * |
| * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved |
| * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) |
| * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) |
| * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) |
| * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) |
| * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute |
| * containing info as possible, see &enum nl80211_rate_info |
| * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) |
| * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this |
| * station) |
| * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station) |
| * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station) |
| * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) |
| * @NL80211_STA_INFO_LLID: the station's mesh LLID |
| * @NL80211_STA_INFO_PLID: the station's mesh PLID |
| * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station |
| * (see %enum nl80211_plink_state) |
| * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested |
| * attribute, like NL80211_STA_INFO_TX_BITRATE. |
| * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute |
| * containing info as possible, see &enum nl80211_sta_bss_param |
| * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected |
| * @__NL80211_STA_INFO_AFTER_LAST: internal |
| * @NL80211_STA_INFO_MAX: highest possible station info attribute |
| */ |
| enum nl80211_sta_info { |
| __NL80211_STA_INFO_INVALID, |
| NL80211_STA_INFO_INACTIVE_TIME, |
| NL80211_STA_INFO_RX_BYTES, |
| NL80211_STA_INFO_TX_BYTES, |
| NL80211_STA_INFO_LLID, |
| NL80211_STA_INFO_PLID, |
| NL80211_STA_INFO_PLINK_STATE, |
| NL80211_STA_INFO_SIGNAL, |
| NL80211_STA_INFO_TX_BITRATE, |
| NL80211_STA_INFO_RX_PACKETS, |
| NL80211_STA_INFO_TX_PACKETS, |
| NL80211_STA_INFO_TX_RETRIES, |
| NL80211_STA_INFO_TX_FAILED, |
| NL80211_STA_INFO_SIGNAL_AVG, |
| NL80211_STA_INFO_RX_BITRATE, |
| NL80211_STA_INFO_BSS_PARAM, |
| NL80211_STA_INFO_CONNECTED_TIME, |
| |
| /* keep last */ |
| __NL80211_STA_INFO_AFTER_LAST, |
| NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_mpath_flags - nl80211 mesh path flags |
| * |
| * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active |
| * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running |
| * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN |
| * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set |
| * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded |
| */ |
| enum nl80211_mpath_flags { |
| NL80211_MPATH_FLAG_ACTIVE = 1<<0, |
| NL80211_MPATH_FLAG_RESOLVING = 1<<1, |
| NL80211_MPATH_FLAG_SN_VALID = 1<<2, |
| NL80211_MPATH_FLAG_FIXED = 1<<3, |
| NL80211_MPATH_FLAG_RESOLVED = 1<<4, |
| }; |
| |
| /** |
| * enum nl80211_mpath_info - mesh path information |
| * |
| * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting |
| * information about a mesh path. |
| * |
| * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved |
| * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination |
| * @NL80211_MPATH_INFO_SN: destination sequence number |
| * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path |
| * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now |
| * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in |
| * &enum nl80211_mpath_flags; |
| * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec |
| * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries |
| * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number |
| * currently defind |
| * @__NL80211_MPATH_INFO_AFTER_LAST: internal use |
| */ |
| enum nl80211_mpath_info { |
| __NL80211_MPATH_INFO_INVALID, |
| NL80211_MPATH_INFO_FRAME_QLEN, |
| NL80211_MPATH_INFO_SN, |
| NL80211_MPATH_INFO_METRIC, |
| NL80211_MPATH_INFO_EXPTIME, |
| NL80211_MPATH_INFO_FLAGS, |
| NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, |
| NL80211_MPATH_INFO_DISCOVERY_RETRIES, |
| |
| /* keep last */ |
| __NL80211_MPATH_INFO_AFTER_LAST, |
| NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_band_attr - band attributes |
| * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved |
| * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, |
| * an array of nested frequency attributes |
| * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, |
| * an array of nested bitrate attributes |
| * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as |
| * defined in 802.11n |
| * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE |
| * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n |
| * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n |
| * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined |
| * @__NL80211_BAND_ATTR_AFTER_LAST: internal use |
| */ |
| enum nl80211_band_attr { |
| __NL80211_BAND_ATTR_INVALID, |
| NL80211_BAND_ATTR_FREQS, |
| NL80211_BAND_ATTR_RATES, |
| |
| NL80211_BAND_ATTR_HT_MCS_SET, |
| NL80211_BAND_ATTR_HT_CAPA, |
| NL80211_BAND_ATTR_HT_AMPDU_FACTOR, |
| NL80211_BAND_ATTR_HT_AMPDU_DENSITY, |
| |
| /* keep last */ |
| __NL80211_BAND_ATTR_AFTER_LAST, |
| NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 |
| }; |
| |
| #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA |
| |
| /** |
| * enum nl80211_frequency_attr - frequency attributes |
| * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved |
| * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz |
| * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current |
| * regulatory domain. |
| * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is |
| * permitted on this channel in current regulatory domain. |
| * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted |
| * on this channel in current regulatory domain. |
| * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory |
| * on this channel in current regulatory domain. |
| * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm |
| * (100 * dBm). |
| * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number |
| * currently defined |
| * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use |
| */ |
| enum nl80211_frequency_attr { |
| __NL80211_FREQUENCY_ATTR_INVALID, |
| NL80211_FREQUENCY_ATTR_FREQ, |
| NL80211_FREQUENCY_ATTR_DISABLED, |
| NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, |
| NL80211_FREQUENCY_ATTR_NO_IBSS, |
| NL80211_FREQUENCY_ATTR_RADAR, |
| NL80211_FREQUENCY_ATTR_MAX_TX_POWER, |
| |
| /* keep last */ |
| __NL80211_FREQUENCY_ATTR_AFTER_LAST, |
| NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 |
| }; |
| |
| #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER |
| |
| /** |
| * enum nl80211_bitrate_attr - bitrate attributes |
| * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved |
| * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps |
| * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported |
| * in 2.4 GHz band. |
| * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number |
| * currently defined |
| * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use |
| */ |
| enum nl80211_bitrate_attr { |
| __NL80211_BITRATE_ATTR_INVALID, |
| NL80211_BITRATE_ATTR_RATE, |
| NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, |
| |
| /* keep last */ |
| __NL80211_BITRATE_ATTR_AFTER_LAST, |
| NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_initiator - Indicates the initiator of a reg domain request |
| * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world |
| * regulatory domain. |
| * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the |
| * regulatory domain. |
| * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the |
| * wireless core it thinks its knows the regulatory domain we should be in. |
| * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an |
| * 802.11 country information element with regulatory information it |
| * thinks we should consider. cfg80211 only processes the country |
| * code from the IE, and relies on the regulatory domain information |
| * structure passed by userspace (CRDA) from our wireless-regdb. |
| * If a channel is enabled but the country code indicates it should |
| * be disabled we disable the channel and re-enable it upon disassociation. |
| */ |
| enum nl80211_reg_initiator { |
| NL80211_REGDOM_SET_BY_CORE, |
| NL80211_REGDOM_SET_BY_USER, |
| NL80211_REGDOM_SET_BY_DRIVER, |
| NL80211_REGDOM_SET_BY_COUNTRY_IE, |
| }; |
| |
| /** |
| * enum nl80211_reg_type - specifies the type of regulatory domain |
| * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains |
| * to a specific country. When this is set you can count on the |
| * ISO / IEC 3166 alpha2 country code being valid. |
| * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory |
| * domain. |
| * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom |
| * driver specific world regulatory domain. These do not apply system-wide |
| * and are only applicable to the individual devices which have requested |
| * them to be applied. |
| * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product |
| * of an intersection between two regulatory domains -- the previously |
| * set regulatory domain on the system and the last accepted regulatory |
| * domain request to be processed. |
| */ |
| enum nl80211_reg_type { |
| NL80211_REGDOM_TYPE_COUNTRY, |
| NL80211_REGDOM_TYPE_WORLD, |
| NL80211_REGDOM_TYPE_CUSTOM_WORLD, |
| NL80211_REGDOM_TYPE_INTERSECTION, |
| }; |
| |
| /** |
| * enum nl80211_reg_rule_attr - regulatory rule attributes |
| * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved |
| * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional |
| * considerations for a given frequency range. These are the |
| * &enum nl80211_reg_rule_flags. |
| * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory |
| * rule in KHz. This is not a center of frequency but an actual regulatory |
| * band edge. |
| * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule |
| * in KHz. This is not a center a frequency but an actual regulatory |
| * band edge. |
| * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this |
| * frequency range, in KHz. |
| * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain |
| * for a given frequency range. The value is in mBi (100 * dBi). |
| * If you don't have one then don't send this. |
| * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for |
| * a given frequency range. The value is in mBm (100 * dBm). |
| * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number |
| * currently defined |
| * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use |
| */ |
| enum nl80211_reg_rule_attr { |
| __NL80211_REG_RULE_ATTR_INVALID, |
| NL80211_ATTR_REG_RULE_FLAGS, |
| |
| NL80211_ATTR_FREQ_RANGE_START, |
| NL80211_ATTR_FREQ_RANGE_END, |
| NL80211_ATTR_FREQ_RANGE_MAX_BW, |
| |
| NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, |
| NL80211_ATTR_POWER_RULE_MAX_EIRP, |
| |
| /* keep last */ |
| __NL80211_REG_RULE_ATTR_AFTER_LAST, |
| NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_reg_rule_flags - regulatory rule flags |
| * |
| * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed |
| * @NL80211_RRF_NO_CCK: CCK modulation not allowed |
| * @NL80211_RRF_NO_INDOOR: indoor operation not allowed |
| * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed |
| * @NL80211_RRF_DFS: DFS support is required to be used |
| * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links |
| * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links |
| * @NL80211_RRF_PASSIVE_SCAN: passive scan is required |
| * @NL80211_RRF_NO_IBSS: no IBSS is allowed |
| */ |
| enum nl80211_reg_rule_flags { |
| NL80211_RRF_NO_OFDM = 1<<0, |
| NL80211_RRF_NO_CCK = 1<<1, |
| NL80211_RRF_NO_INDOOR = 1<<2, |
| NL80211_RRF_NO_OUTDOOR = 1<<3, |
| NL80211_RRF_DFS = 1<<4, |
| NL80211_RRF_PTP_ONLY = 1<<5, |
| NL80211_RRF_PTMP_ONLY = 1<<6, |
| NL80211_RRF_PASSIVE_SCAN = 1<<7, |
| NL80211_RRF_NO_IBSS = 1<<8, |
| }; |
| |
| /** |
| * enum nl80211_survey_info - survey information |
| * |
| * These attribute types are used with %NL80211_ATTR_SURVEY_INFO |
| * when getting information about a survey. |
| * |
| * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved |
| * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel |
| * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) |
| * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used |
| * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio |
| * spent on this channel |
| * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary |
| * channel was sensed busy (either due to activity or energy detect) |
| * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension |
| * channel was sensed busy |
| * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent |
| * receiving data |
| * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent |
| * transmitting data |
| * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number |
| * currently defined |
| * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use |
| */ |
| enum nl80211_survey_info { |
| __NL80211_SURVEY_INFO_INVALID, |
| NL80211_SURVEY_INFO_FREQUENCY, |
| NL80211_SURVEY_INFO_NOISE, |
| NL80211_SURVEY_INFO_IN_USE, |
| NL80211_SURVEY_INFO_CHANNEL_TIME, |
| NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY, |
| NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY, |
| NL80211_SURVEY_INFO_CHANNEL_TIME_RX, |
| NL80211_SURVEY_INFO_CHANNEL_TIME_TX, |
| |
| /* keep last */ |
| __NL80211_SURVEY_INFO_AFTER_LAST, |
| NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_mntr_flags - monitor configuration flags |
| * |
| * Monitor configuration flags. |
| * |
| * @__NL80211_MNTR_FLAG_INVALID: reserved |
| * |
| * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS |
| * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP |
| * @NL80211_MNTR_FLAG_CONTROL: pass control frames |
| * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering |
| * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. |
| * overrides all other flags. |
| * |
| * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use |
| * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag |
| */ |
| enum nl80211_mntr_flags { |
| __NL80211_MNTR_FLAG_INVALID, |
| NL80211_MNTR_FLAG_FCSFAIL, |
| NL80211_MNTR_FLAG_PLCPFAIL, |
| NL80211_MNTR_FLAG_CONTROL, |
| NL80211_MNTR_FLAG_OTHER_BSS, |
| NL80211_MNTR_FLAG_COOK_FRAMES, |
| |
| /* keep last */ |
| __NL80211_MNTR_FLAG_AFTER_LAST, |
| NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_meshconf_params - mesh configuration parameters |
| * |
| * Mesh configuration parameters. These can be changed while the mesh is |
| * active. |
| * |
| * @__NL80211_MESHCONF_INVALID: internal use |
| * |
| * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in |
| * millisecond units, used by the Peer Link Open message |
| * |
| * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in |
| * millisecond units, used by the peer link management to close a peer link |
| * |
| * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in |
| * millisecond units |
| * |
| * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed |
| * on this mesh interface |
| * |
| * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link |
| * open retries that can be sent to establish a new peer link instance in a |
| * mesh |
| * |
| * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh |
| * point. |
| * |
| * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically |
| * open peer links when we detect compatible mesh peers. |
| * |
| * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames |
| * containing a PREQ that an MP can send to a particular destination (path |
| * target) |
| * |
| * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths |
| * (in milliseconds) |
| * |
| * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait |
| * until giving up on a path discovery (in milliseconds) |
| * |
| * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh |
| * points receiving a PREQ shall consider the forwarding information from the |
| * root to be valid. (TU = time unit) |
| * |
| * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in |
| * TUs) during which an MP can send only one action frame containing a PREQ |
| * reference element |
| * |
| * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) |
| * that it takes for an HWMP information element to propagate across the mesh |
| * |
| * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not |
| * |
| * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a |
| * source mesh point for path selection elements. |
| * |
| * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute |
| * |
| * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use |
| */ |
| enum nl80211_meshconf_params { |
| __NL80211_MESHCONF_INVALID, |
| NL80211_MESHCONF_RETRY_TIMEOUT, |
| NL80211_MESHCONF_CONFIRM_TIMEOUT, |
| NL80211_MESHCONF_HOLDING_TIMEOUT, |
| NL80211_MESHCONF_MAX_PEER_LINKS, |
| NL80211_MESHCONF_MAX_RETRIES, |
| NL80211_MESHCONF_TTL, |
| NL80211_MESHCONF_AUTO_OPEN_PLINKS, |
| NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, |
| NL80211_MESHCONF_PATH_REFRESH_TIME, |
| NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, |
| NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, |
| NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, |
| NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, |
| NL80211_MESHCONF_HWMP_ROOTMODE, |
| NL80211_MESHCONF_ELEMENT_TTL, |
| |
| /* keep last */ |
| __NL80211_MESHCONF_ATTR_AFTER_LAST, |
| NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_mesh_setup_params - mesh setup parameters |
| * |
| * Mesh setup parameters. These are used to start/join a mesh and cannot be |
| * changed while the mesh is active. |
| * |
| * @__NL80211_MESH_SETUP_INVALID: Internal use |
| * |
| * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a |
| * vendor specific path selection algorithm or disable it to use the default |
| * HWMP. |
| * |
| * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a |
| * vendor specific path metric or disable it to use the default Airtime |
| * metric. |
| * |
| * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a |
| * robust security network ie, or a vendor specific information element that |
| * vendors will use to identify the path selection methods and metrics in use. |
| * |
| * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication |
| * daemon will be authenticating mesh candidates. |
| * |
| * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication |
| * daemon will be securing peer link frames. AMPE is a secured version of Mesh |
| * Peering Management (MPM) and is implemented with the assistance of a |
| * userspace daemon. When this flag is set, the kernel will send peer |
| * management frames to a userspace daemon that will implement AMPE |
| * functionality (security capabilities selection, key confirmation, and key |
| * management). When the flag is unset (default), the kernel can autonomously |
| * complete (unsecured) mesh peering without the need of a userspace daemon. |
| * |
| * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number |
| * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use |
| */ |
| enum nl80211_mesh_setup_params { |
| __NL80211_MESH_SETUP_INVALID, |
| NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, |
| NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, |
| NL80211_MESH_SETUP_IE, |
| NL80211_MESH_SETUP_USERSPACE_AUTH, |
| NL80211_MESH_SETUP_USERSPACE_AMPE, |
| |
| /* keep last */ |
| __NL80211_MESH_SETUP_ATTR_AFTER_LAST, |
| NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_txq_attr - TX queue parameter attributes |
| * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved |
| * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) |
| * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning |
| * disabled |
| * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form |
| * 2^n-1 in the range 1..32767] |
| * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form |
| * 2^n-1 in the range 1..32767] |
| * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] |
| * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal |
| * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number |
| */ |
| enum nl80211_txq_attr { |
| __NL80211_TXQ_ATTR_INVALID, |
| NL80211_TXQ_ATTR_QUEUE, |
| NL80211_TXQ_ATTR_TXOP, |
| NL80211_TXQ_ATTR_CWMIN, |
| NL80211_TXQ_ATTR_CWMAX, |
| NL80211_TXQ_ATTR_AIFS, |
| |
| /* keep last */ |
| __NL80211_TXQ_ATTR_AFTER_LAST, |
| NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 |
| }; |
| |
| enum nl80211_txq_q { |
| NL80211_TXQ_Q_VO, |
| NL80211_TXQ_Q_VI, |
| NL80211_TXQ_Q_BE, |
| NL80211_TXQ_Q_BK |
| }; |
| |
| enum nl80211_channel_type { |
| NL80211_CHAN_NO_HT, |
| NL80211_CHAN_HT20, |
| NL80211_CHAN_HT40MINUS, |
| NL80211_CHAN_HT40PLUS |
| }; |
| |
| /** |
| * enum nl80211_bss - netlink attributes for a BSS |
| * |
| * @__NL80211_BSS_INVALID: invalid |
| * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) |
| * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) |
| * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) |
| * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) |
| * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) |
| * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the |
| * raw information elements from the probe response/beacon (bin); |
| * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are |
| * from a Probe Response frame; otherwise they are from a Beacon frame. |
| * However, if the driver does not indicate the source of the IEs, these |
| * IEs may be from either frame subtype. |
| * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon |
| * in mBm (100 * dBm) (s32) |
| * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon |
| * in unspecified units, scaled to 0..100 (u8) |
| * @NL80211_BSS_STATUS: status, if this BSS is "used" |
| * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms |
| * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information |
| * elements from a Beacon frame (bin); not present if no Beacon frame has |
| * yet been received |
| * @__NL80211_BSS_AFTER_LAST: internal |
| * @NL80211_BSS_MAX: highest BSS attribute |
| */ |
| enum nl80211_bss { |
| __NL80211_BSS_INVALID, |
| NL80211_BSS_BSSID, |
| NL80211_BSS_FREQUENCY, |
| NL80211_BSS_TSF, |
| NL80211_BSS_BEACON_INTERVAL, |
| NL80211_BSS_CAPABILITY, |
| NL80211_BSS_INFORMATION_ELEMENTS, |
| NL80211_BSS_SIGNAL_MBM, |
| NL80211_BSS_SIGNAL_UNSPEC, |
| NL80211_BSS_STATUS, |
| NL80211_BSS_SEEN_MS_AGO, |
| NL80211_BSS_BEACON_IES, |
| |
| /* keep last */ |
| __NL80211_BSS_AFTER_LAST, |
| NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_bss_status - BSS "status" |
| * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. |
| * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. |
| * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. |
| * |
| * The BSS status is a BSS attribute in scan dumps, which |
| * indicates the status the interface has wrt. this BSS. |
| */ |
| enum nl80211_bss_status { |
| NL80211_BSS_STATUS_AUTHENTICATED, |
| NL80211_BSS_STATUS_ASSOCIATED, |
| NL80211_BSS_STATUS_IBSS_JOINED, |
| }; |
| |
| /** |
| * enum nl80211_auth_type - AuthenticationType |
| * |
| * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication |
| * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) |
| * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) |
| * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) |
| * @__NL80211_AUTHTYPE_NUM: internal |
| * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm |
| * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by |
| * trying multiple times); this is invalid in netlink -- leave out |
| * the attribute for this on CONNECT commands. |
| */ |
| enum nl80211_auth_type { |
| NL80211_AUTHTYPE_OPEN_SYSTEM, |
| NL80211_AUTHTYPE_SHARED_KEY, |
| NL80211_AUTHTYPE_FT, |
| NL80211_AUTHTYPE_NETWORK_EAP, |
| |
| /* keep last */ |
| __NL80211_AUTHTYPE_NUM, |
| NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, |
| NL80211_AUTHTYPE_AUTOMATIC |
| }; |
| |
| /** |
| * enum nl80211_key_type - Key Type |
| * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key |
| * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key |
| * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) |
| * @NUM_NL80211_KEYTYPES: number of defined key types |
| */ |
| enum nl80211_key_type { |
| NL80211_KEYTYPE_GROUP, |
| NL80211_KEYTYPE_PAIRWISE, |
| NL80211_KEYTYPE_PEERKEY, |
| |
| NUM_NL80211_KEYTYPES |
| }; |
| |
| /** |
| * enum nl80211_mfp - Management frame protection state |
| * @NL80211_MFP_NO: Management frame protection not used |
| * @NL80211_MFP_REQUIRED: Management frame protection required |
| */ |
| enum nl80211_mfp { |
| NL80211_MFP_NO, |
| NL80211_MFP_REQUIRED, |
| }; |
| |
| enum nl80211_wpa_versions { |
| NL80211_WPA_VERSION_1 = 1 << 0, |
| NL80211_WPA_VERSION_2 = 1 << 1, |
| }; |
| |
| /** |
| * enum nl80211_key_default_types - key default types |
| * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid |
| * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default |
| * unicast key |
| * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default |
| * multicast key |
| * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types |
| */ |
| enum nl80211_key_default_types { |
| __NL80211_KEY_DEFAULT_TYPE_INVALID, |
| NL80211_KEY_DEFAULT_TYPE_UNICAST, |
| NL80211_KEY_DEFAULT_TYPE_MULTICAST, |
| |
| NUM_NL80211_KEY_DEFAULT_TYPES |
| }; |
| |
| /** |
| * enum nl80211_key_attributes - key attributes |
| * @__NL80211_KEY_INVALID: invalid |
| * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of |
| * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC |
| * keys |
| * @NL80211_KEY_IDX: key ID (u8, 0-3) |
| * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 |
| * section 7.3.2.25.1, e.g. 0x000FAC04) |
| * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and |
| * CCMP keys, each six bytes in little endian |
| * @NL80211_KEY_DEFAULT: flag indicating default key |
| * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key |
| * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not |
| * specified the default depends on whether a MAC address was |
| * given with the command using the key or not (u32) |
| * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags |
| * attributes, specifying what a key should be set as default as. |
| * See &enum nl80211_key_default_types. |
| * @__NL80211_KEY_AFTER_LAST: internal |
| * @NL80211_KEY_MAX: highest key attribute |
| */ |
| enum nl80211_key_attributes { |
| __NL80211_KEY_INVALID, |
| NL80211_KEY_DATA, |
| NL80211_KEY_IDX, |
| NL80211_KEY_CIPHER, |
| NL80211_KEY_SEQ, |
| NL80211_KEY_DEFAULT, |
| NL80211_KEY_DEFAULT_MGMT, |
| NL80211_KEY_TYPE, |
| NL80211_KEY_DEFAULT_TYPES, |
| |
| /* keep last */ |
| __NL80211_KEY_AFTER_LAST, |
| NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_tx_rate_attributes - TX rate set attributes |
| * @__NL80211_TXRATE_INVALID: invalid |
| * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection |
| * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with |
| * 1 = 500 kbps) but without the IE length restriction (at most |
| * %NL80211_MAX_SUPP_RATES in a single array). |
| * @__NL80211_TXRATE_AFTER_LAST: internal |
| * @NL80211_TXRATE_MAX: highest TX rate attribute |
| */ |
| enum nl80211_tx_rate_attributes { |
| __NL80211_TXRATE_INVALID, |
| NL80211_TXRATE_LEGACY, |
| |
| /* keep last */ |
| __NL80211_TXRATE_AFTER_LAST, |
| NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_band - Frequency band |
| * @NL80211_BAND_2GHZ: 2.4 GHz ISM band |
| * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) |
| */ |
| enum nl80211_band { |
| NL80211_BAND_2GHZ, |
| NL80211_BAND_5GHZ, |
| }; |
| |
| enum nl80211_ps_state { |
| NL80211_PS_DISABLED, |
| NL80211_PS_ENABLED, |
| }; |
| |
| /** |
| * enum nl80211_attr_cqm - connection quality monitor attributes |
| * @__NL80211_ATTR_CQM_INVALID: invalid |
| * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies |
| * the threshold for the RSSI level at which an event will be sent. Zero |
| * to disable. |
| * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies |
| * the minimum amount the RSSI level must change after an event before a |
| * new event may be issued (to reduce effects of RSSI oscillation). |
| * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event |
| * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many |
| * consecutive packets were not acknowledged by the peer |
| * @__NL80211_ATTR_CQM_AFTER_LAST: internal |
| * @NL80211_ATTR_CQM_MAX: highest key attribute |
| */ |
| enum nl80211_attr_cqm { |
| __NL80211_ATTR_CQM_INVALID, |
| NL80211_ATTR_CQM_RSSI_THOLD, |
| NL80211_ATTR_CQM_RSSI_HYST, |
| NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, |
| NL80211_ATTR_CQM_PKT_LOSS_EVENT, |
| |
| /* keep last */ |
| __NL80211_ATTR_CQM_AFTER_LAST, |
| NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event |
| * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the |
| * configured threshold |
| * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the |
| * configured threshold |
| */ |
| enum nl80211_cqm_rssi_threshold_event { |
| NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, |
| NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, |
| }; |
| |
| |
| /** |
| * enum nl80211_tx_power_setting - TX power adjustment |
| * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power |
| * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter |
| * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter |
| */ |
| enum nl80211_tx_power_setting { |
| NL80211_TX_POWER_AUTOMATIC, |
| NL80211_TX_POWER_LIMITED, |
| NL80211_TX_POWER_FIXED, |
| }; |
| |
| /** |
| * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute |
| * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute |
| * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has |
| * a zero bit are ignored |
| * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have |
| * a bit for each byte in the pattern. The lowest-order bit corresponds |
| * to the first byte of the pattern, but the bytes of the pattern are |
| * in a little-endian-like format, i.e. the 9th byte of the pattern |
| * corresponds to the lowest-order bit in the second byte of the mask. |
| * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where |
| * xx indicates "don't care") would be represented by a pattern of |
| * twelve zero bytes, and a mask of "0xed,0x07". |
| * Note that the pattern matching is done as though frames were not |
| * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked |
| * first (including SNAP header unpacking) and then matched. |
| * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes |
| * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number |
| */ |
| enum nl80211_wowlan_packet_pattern_attr { |
| __NL80211_WOWLAN_PKTPAT_INVALID, |
| NL80211_WOWLAN_PKTPAT_MASK, |
| NL80211_WOWLAN_PKTPAT_PATTERN, |
| |
| NUM_NL80211_WOWLAN_PKTPAT, |
| MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, |
| }; |
| |
| /** |
| * struct nl80211_wowlan_pattern_support - pattern support information |
| * @max_patterns: maximum number of patterns supported |
| * @min_pattern_len: minimum length of each pattern |
| * @max_pattern_len: maximum length of each pattern |
| * |
| * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when |
| * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the |
| * capability information given by the kernel to userspace. |
| */ |
| struct nl80211_wowlan_pattern_support { |
| __u32 max_patterns; |
| __u32 min_pattern_len; |
| __u32 max_pattern_len; |
| } __attribute__((packed)); |
| |
| /** |
| * enum nl80211_wowlan_triggers - WoWLAN trigger definitions |
| * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes |
| * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put |
| * the chip into a special state -- works best with chips that have |
| * support for low-power operation already (flag) |
| * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect |
| * is detected is implementation-specific (flag) |
| * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed |
| * by 16 repetitions of MAC addr, anywhere in payload) (flag) |
| * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns |
| * which are passed in an array of nested attributes, each nested attribute |
| * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. |
| * Each pattern defines a wakeup packet. The matching is done on the MSDU, |
| * i.e. as though the packet was an 802.3 packet, so the pattern matching |
| * is done after the packet is converted to the MSDU. |
| * |
| * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute |
| * carrying a &struct nl80211_wowlan_pattern_support. |
| * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers |
| * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number |
| */ |
| enum nl80211_wowlan_triggers { |
| __NL80211_WOWLAN_TRIG_INVALID, |
| NL80211_WOWLAN_TRIG_ANY, |
| NL80211_WOWLAN_TRIG_DISCONNECT, |
| NL80211_WOWLAN_TRIG_MAGIC_PKT, |
| NL80211_WOWLAN_TRIG_PKT_PATTERN, |
| |
| /* keep last */ |
| NUM_NL80211_WOWLAN_TRIG, |
| MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 |
| }; |
| |
| /** |
| * enum nl80211_iface_limit_attrs - limit attributes |
| * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) |
| * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that |
| * can be chosen from this set of interface types (u32) |
| * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a |
| * flag attribute for each interface type in this set |
| * @NUM_NL80211_IFACE_LIMIT: number of attributes |
| * @MAX_NL80211_IFACE_LIMIT: highest attribute number |
| */ |
| enum nl80211_iface_limit_attrs { |
| NL80211_IFACE_LIMIT_UNSPEC, |
| NL80211_IFACE_LIMIT_MAX, |
| NL80211_IFACE_LIMIT_TYPES, |
| |
| /* keep last */ |
| NUM_NL80211_IFACE_LIMIT, |
| MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 |
| }; |
| |
| /** |
| * enum nl80211_if_combination_attrs -- interface combination attributes |
| * |
| * @NL80211_IFACE_COMB_UNSPEC: (reserved) |
| * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits |
| * for given interface types, see &enum nl80211_iface_limit_attrs. |
| * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of |
| * interfaces that can be created in this group. This number doesn't |
| * apply to interfaces purely managed in software, which are listed |
| * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. |
| * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that |
| * beacon intervals within this group must be all the same even for |
| * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt |
| * the infrastructure network's beacon interval. |
| * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many |
| * different channels may be used within this group. |
| * @NUM_NL80211_IFACE_COMB: number of attributes |
| * @MAX_NL80211_IFACE_COMB: highest attribute number |
| * |
| * Examples: |
| * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 |
| * => allows an AP and a STA that must match BIs |
| * |
| * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8 |
| * => allows 8 of AP/GO |
| * |
| * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 |
| * => allows two STAs on different channels |
| * |
| * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 |
| * => allows a STA plus three P2P interfaces |
| * |
| * The list of these four possiblities could completely be contained |
| * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate |
| * that any of these groups must match. |
| * |
| * "Combinations" of just a single interface will not be listed here, |
| * a single interface of any valid interface type is assumed to always |
| * be possible by itself. This means that implicitly, for each valid |
| * interface type, the following group always exists: |
| * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1 |
| */ |
| enum nl80211_if_combination_attrs { |
| NL80211_IFACE_COMB_UNSPEC, |
| NL80211_IFACE_COMB_LIMITS, |
| NL80211_IFACE_COMB_MAXNUM, |
| NL80211_IFACE_COMB_STA_AP_BI_MATCH, |
| NL80211_IFACE_COMB_NUM_CHANNELS, |
| |
| /* keep last */ |
| NUM_NL80211_IFACE_COMB, |
| MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 |
| }; |
| |
| |
| /** |
| * enum nl80211_plink_state - state of a mesh peer link finite state machine |
| * |
| * @NL80211_PLINK_LISTEN: initial state, considered the implicit |
| * state of non existant mesh peer links |
| * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to |
| * this mesh peer |
| * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received |
| * from this mesh peer |
| * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been |
| * received from this mesh peer |
| * @NL80211_PLINK_ESTAB: mesh peer link is established |
| * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled |
| * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh |
| * plink are discarded |
| * @NUM_NL80211_PLINK_STATES: number of peer link states |
| * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states |
| */ |
| enum nl80211_plink_state { |
| NL80211_PLINK_LISTEN, |
| NL80211_PLINK_OPN_SNT, |
| NL80211_PLINK_OPN_RCVD, |
| NL80211_PLINK_CNF_RCVD, |
| NL80211_PLINK_ESTAB, |
| NL80211_PLINK_HOLDING, |
| NL80211_PLINK_BLOCKED, |
| |
| /* keep last */ |
| NUM_NL80211_PLINK_STATES, |
| MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 |
| }; |
| |
| /** |
| * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID |
| * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in |
| * Beacon frames) |
| * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element |
| * in Beacon frames |
| * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID |
| * element in Beacon frames but zero out each byte in the SSID |
| */ |
| enum nl80211_hidden_ssid { |
| NL80211_HIDDEN_SSID_NOT_IN_USE, |
| NL80211_HIDDEN_SSID_ZERO_LEN, |
| NL80211_HIDDEN_SSID_ZERO_CONTENTS |
| }; |
| |
| #endif /* __LINUX_NL80211_H */ |