blob: bcc4668835b5b11065256ba8a177f865a2f5dfe8 [file] [log] [blame]
/* Derived from Applicom driver ac.c for SCO Unix */
/* Ported by David Woodhouse, Axiom (Cambridge) Ltd. */
/* dwmw2@infradead.org 30/8/98 */
/* $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ */
/* This module is for Linux 2.1 and 2.2 series kernels. */
/*****************************************************************************/
/* J PAGET 18/02/94 passage V2.4.2 ioctl avec code 2 reset to les interrupt */
/* ceci pour reseter correctement apres une sortie sauvage */
/* J PAGET 02/05/94 passage V2.4.3 dans le traitement de d'interruption, */
/* LoopCount n'etait pas initialise a 0. */
/* F LAFORSE 04/07/95 version V2.6.0 lecture bidon apres acces a une carte */
/* pour liberer le bus */
/* J.PAGET 19/11/95 version V2.6.1 Nombre, addresse,irq n'est plus configure */
/* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter */
/* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3 */
/* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes */
/* adresses de base des cartes, IOCTL 6 plus complet */
/* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification */
/* de code autre que le texte V2.6.1 en V2.8.0 */
/*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/pci.h>
#include <linux/wait.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include "applicom.h"
/* NOTE: We use for loops with {write,read}b() instead of
memcpy_{from,to}io throughout this driver. This is because
the board doesn't correctly handle word accesses - only
bytes.
*/
#undef DEBUG
#define MAX_BOARD 8 /* maximum of pc board possible */
#define MAX_ISA_BOARD 4
#define LEN_RAM_IO 0x800
#define AC_MINOR 157
#ifndef PCI_VENDOR_ID_APPLICOM
#define PCI_VENDOR_ID_APPLICOM 0x1389
#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001
#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003
#endif
#define MAX_PCI_DEVICE_NUM 3
static char *applicom_pci_devnames[] = {
"PCI board",
"PCI2000IBS / PCI2000CAN",
"PCI2000PFB"
};
static struct pci_device_id applicom_pci_tbl[] = {
{ PCI_VENDOR_ID_APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, applicom_pci_tbl);
MODULE_AUTHOR("David Woodhouse & Applicom International");
MODULE_DESCRIPTION("Driver for Applicom Profibus card");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("ac");
static struct applicom_board {
unsigned long PhysIO;
void __iomem *RamIO;
wait_queue_head_t FlagSleepSend;
long irq;
spinlock_t mutex;
} apbs[MAX_BOARD];
static unsigned int irq = 0; /* interrupt number IRQ */
static unsigned long mem = 0; /* physical segment of board */
module_param(irq, uint, 0);
MODULE_PARM_DESC(irq, "IRQ of the Applicom board");
module_param(mem, ulong, 0);
MODULE_PARM_DESC(mem, "Shared Memory Address of Applicom board");
static unsigned int numboards; /* number of installed boards */
static volatile unsigned char Dummy;
static DECLARE_WAIT_QUEUE_HEAD(FlagSleepRec);
static unsigned int WriteErrorCount; /* number of write error */
static unsigned int ReadErrorCount; /* number of read error */
static unsigned int DeviceErrorCount; /* number of device error */
static ssize_t ac_read (struct file *, char __user *, size_t, loff_t *);
static ssize_t ac_write (struct file *, const char __user *, size_t, loff_t *);
static int ac_ioctl(struct inode *, struct file *, unsigned int,
unsigned long);
static irqreturn_t ac_interrupt(int, void *, struct pt_regs *);
static struct file_operations ac_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = ac_read,
.write = ac_write,
.ioctl = ac_ioctl,
};
static struct miscdevice ac_miscdev = {
AC_MINOR,
"ac",
&ac_fops
};
static int dummy; /* dev_id for request_irq() */
static int ac_register_board(unsigned long physloc, void __iomem *loc,
unsigned char boardno)
{
volatile unsigned char byte_reset_it;
if((readb(loc + CONF_END_TEST) != 0x00) ||
(readb(loc + CONF_END_TEST + 1) != 0x55) ||
(readb(loc + CONF_END_TEST + 2) != 0xAA) ||
(readb(loc + CONF_END_TEST + 3) != 0xFF))
return 0;
if (!boardno)
boardno = readb(loc + NUMCARD_OWNER_TO_PC);
if (!boardno || boardno > MAX_BOARD) {
printk(KERN_WARNING "Board #%d (at 0x%lx) is out of range (1 <= x <= %d).\n",
boardno, physloc, MAX_BOARD);
return 0;
}
if (apbs[boardno - 1].RamIO) {
printk(KERN_WARNING "Board #%d (at 0x%lx) conflicts with previous board #%d (at 0x%lx)\n",
boardno, physloc, boardno, apbs[boardno-1].PhysIO);
return 0;
}
boardno--;
apbs[boardno].PhysIO = physloc;
apbs[boardno].RamIO = loc;
init_waitqueue_head(&apbs[boardno].FlagSleepSend);
spin_lock_init(&apbs[boardno].mutex);
byte_reset_it = readb(loc + RAM_IT_TO_PC);
numboards++;
return boardno + 1;
}
static void __exit applicom_exit(void)
{
unsigned int i;
misc_deregister(&ac_miscdev);
for (i = 0; i < MAX_BOARD; i++) {
if (!apbs[i].RamIO)
continue;
if (apbs[i].irq)
free_irq(apbs[i].irq, &dummy);
iounmap(apbs[i].RamIO);
}
}
static int __init applicom_init(void)
{
int i, numisa = 0;
struct pci_dev *dev = NULL;
void __iomem *RamIO;
int boardno, ret;
printk(KERN_INFO "Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $\n");
/* No mem and irq given - check for a PCI card */
while ( (dev = pci_get_class(PCI_CLASS_OTHERS << 16, dev))) {
if (dev->vendor != PCI_VENDOR_ID_APPLICOM)
continue;
if (dev->device > MAX_PCI_DEVICE_NUM || dev->device == 0)
continue;
if (pci_enable_device(dev))
return -EIO;
RamIO = ioremap(dev->resource[0].start, LEN_RAM_IO);
if (!RamIO) {
printk(KERN_INFO "ac.o: Failed to ioremap PCI memory "
"space at 0x%llx\n",
(unsigned long long)dev->resource[0].start);
pci_disable_device(dev);
return -EIO;
}
printk(KERN_INFO "Applicom %s found at mem 0x%llx, irq %d\n",
applicom_pci_devnames[dev->device-1],
(unsigned long long)dev->resource[0].start,
dev->irq);
boardno = ac_register_board(dev->resource[0].start, RamIO,0);
if (!boardno) {
printk(KERN_INFO "ac.o: PCI Applicom device doesn't have correct signature.\n");
iounmap(RamIO);
pci_disable_device(dev);
continue;
}
if (request_irq(dev->irq, &ac_interrupt, IRQF_SHARED, "Applicom PCI", &dummy)) {
printk(KERN_INFO "Could not allocate IRQ %d for PCI Applicom device.\n", dev->irq);
iounmap(RamIO);
pci_disable_device(dev);
apbs[boardno - 1].RamIO = NULL;
continue;
}
/* Enable interrupts. */
writeb(0x40, apbs[boardno - 1].RamIO + RAM_IT_FROM_PC);
apbs[boardno - 1].irq = dev->irq;
}
/* Finished with PCI cards. If none registered,
* and there was no mem/irq specified, exit */
if (!mem || !irq) {
if (numboards)
goto fin;
else {
printk(KERN_INFO "ac.o: No PCI boards found.\n");
printk(KERN_INFO "ac.o: For an ISA board you must supply memory and irq parameters.\n");
return -ENXIO;
}
}
/* Now try the specified ISA cards */
for (i = 0; i < MAX_ISA_BOARD; i++) {
RamIO = ioremap(mem + (LEN_RAM_IO * i), LEN_RAM_IO);
if (!RamIO) {
printk(KERN_INFO "ac.o: Failed to ioremap the ISA card's memory space (slot #%d)\n", i + 1);
continue;
}
if (!(boardno = ac_register_board((unsigned long)mem+ (LEN_RAM_IO*i),
RamIO,i+1))) {
iounmap(RamIO);
continue;
}
printk(KERN_NOTICE "Applicom ISA card found at mem 0x%lx, irq %d\n", mem + (LEN_RAM_IO*i), irq);
if (!numisa) {
if (request_irq(irq, &ac_interrupt, IRQF_SHARED, "Applicom ISA", &dummy)) {
printk(KERN_WARNING "Could not allocate IRQ %d for ISA Applicom device.\n", irq);
iounmap(RamIO);
apbs[boardno - 1].RamIO = NULL;
}
else
apbs[boardno - 1].irq = irq;
}
else
apbs[boardno - 1].irq = 0;
numisa++;
}
if (!numisa)
printk(KERN_WARNING "ac.o: No valid ISA Applicom boards found "
"at mem 0x%lx\n", mem);
fin:
init_waitqueue_head(&FlagSleepRec);
WriteErrorCount = 0;
ReadErrorCount = 0;
DeviceErrorCount = 0;
if (numboards) {
ret = misc_register(&ac_miscdev);
if (ret) {
printk(KERN_WARNING "ac.o: Unable to register misc device\n");
goto out;
}
for (i = 0; i < MAX_BOARD; i++) {
int serial;
char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1];
if (!apbs[i].RamIO)
continue;
for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++)
boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial);
boardname[serial] = 0;
printk(KERN_INFO "Applicom board %d: %s, PROM V%d.%d",
i+1, boardname,
(int)(readb(apbs[i].RamIO + VERS) >> 4),
(int)(readb(apbs[i].RamIO + VERS) & 0xF));
serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) +
(readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) +
(readb(apbs[i].RamIO + SERIAL_NUMBER + 2) );
if (serial != 0)
printk(" S/N %d\n", serial);
else
printk("\n");
}
return 0;
}
else
return -ENXIO;
out:
for (i = 0; i < MAX_BOARD; i++) {
if (!apbs[i].RamIO)
continue;
if (apbs[i].irq)
free_irq(apbs[i].irq, &dummy);
iounmap(apbs[i].RamIO);
}
pci_disable_device(dev);
return ret;
}
module_init(applicom_init);
module_exit(applicom_exit);
static ssize_t ac_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos)
{
unsigned int NumCard; /* Board number 1 -> 8 */
unsigned int IndexCard; /* Index board number 0 -> 7 */
unsigned char TicCard; /* Board TIC to send */
unsigned long flags; /* Current priority */
struct st_ram_io st_loc;
struct mailbox tmpmailbox;
#ifdef DEBUG
int c;
#endif
DECLARE_WAITQUEUE(wait, current);
if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) {
static int warncount = 5;
if (warncount) {
printk(KERN_INFO "Hmmm. write() of Applicom card, length %zd != expected %zd\n",
count, sizeof(struct st_ram_io) + sizeof(struct mailbox));
warncount--;
}
return -EINVAL;
}
if(copy_from_user(&st_loc, buf, sizeof(struct st_ram_io)))
return -EFAULT;
if(copy_from_user(&tmpmailbox, &buf[sizeof(struct st_ram_io)],
sizeof(struct mailbox)))
return -EFAULT;
NumCard = st_loc.num_card; /* board number to send */
TicCard = st_loc.tic_des_from_pc; /* tic number to send */
IndexCard = NumCard - 1;
if((NumCard < 1) || (NumCard > MAX_BOARD) || !apbs[IndexCard].RamIO)
return -EINVAL;
#ifdef DEBUG
printk("Write to applicom card #%d. struct st_ram_io follows:",
IndexCard+1);
for (c = 0; c < sizeof(struct st_ram_io);) {
printk("\n%5.5X: %2.2X", c, ((unsigned char *) &st_loc)[c]);
for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) {
printk(" %2.2X", ((unsigned char *) &st_loc)[c]);
}
}
printk("\nstruct mailbox follows:");
for (c = 0; c < sizeof(struct mailbox);) {
printk("\n%5.5X: %2.2X", c, ((unsigned char *) &tmpmailbox)[c]);
for (c++; c % 8 && c < sizeof(struct mailbox); c++) {
printk(" %2.2X", ((unsigned char *) &tmpmailbox)[c]);
}
}
printk("\n");
#endif
spin_lock_irqsave(&apbs[IndexCard].mutex, flags);
/* Test octet ready correct */
if(readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) > 2) {
Dummy = readb(apbs[IndexCard].RamIO + VERS);
spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
printk(KERN_WARNING "APPLICOM driver write error board %d, DataFromPcReady = %d\n",
IndexCard,(int)readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY));
DeviceErrorCount++;
return -EIO;
}
/* Place ourselves on the wait queue */
set_current_state(TASK_INTERRUPTIBLE);
add_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait);
/* Check whether the card is ready for us */
while (readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) != 0) {
Dummy = readb(apbs[IndexCard].RamIO + VERS);
/* It's busy. Sleep. */
spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
schedule();
if (signal_pending(current)) {
remove_wait_queue(&apbs[IndexCard].FlagSleepSend,
&wait);
return -EINTR;
}
spin_lock_irqsave(&apbs[IndexCard].mutex, flags);
set_current_state(TASK_INTERRUPTIBLE);
}
/* We may not have actually slept */
set_current_state(TASK_RUNNING);
remove_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait);
writeb(1, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
/* Which is best - lock down the pages with rawio and then
copy directly, or use bounce buffers? For now we do the latter
because it works with 2.2 still */
{
unsigned char *from = (unsigned char *) &tmpmailbox;
void __iomem *to = apbs[IndexCard].RamIO + RAM_FROM_PC;
int c;
for (c = 0; c < sizeof(struct mailbox); c++)
writeb(*(from++), to++);
}
writeb(0x20, apbs[IndexCard].RamIO + TIC_OWNER_FROM_PC);
writeb(0xff, apbs[IndexCard].RamIO + NUMCARD_OWNER_FROM_PC);
writeb(TicCard, apbs[IndexCard].RamIO + TIC_DES_FROM_PC);
writeb(NumCard, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC);
writeb(2, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
Dummy = readb(apbs[IndexCard].RamIO + VERS);
spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
return 0;
}
static int do_ac_read(int IndexCard, char __user *buf,
struct st_ram_io *st_loc, struct mailbox *mailbox)
{
void __iomem *from = apbs[IndexCard].RamIO + RAM_TO_PC;
unsigned char *to = (unsigned char *)&mailbox;
#ifdef DEBUG
int c;
#endif
st_loc->tic_owner_to_pc = readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC);
st_loc->numcard_owner_to_pc = readb(apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC);
{
int c;
for (c = 0; c < sizeof(struct mailbox); c++)
*(to++) = readb(from++);
}
writeb(1, apbs[IndexCard].RamIO + ACK_FROM_PC_READY);
writeb(1, apbs[IndexCard].RamIO + TYP_ACK_FROM_PC);
writeb(IndexCard+1, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC);
writeb(readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC),
apbs[IndexCard].RamIO + TIC_ACK_FROM_PC);
writeb(2, apbs[IndexCard].RamIO + ACK_FROM_PC_READY);
writeb(0, apbs[IndexCard].RamIO + DATA_TO_PC_READY);
writeb(2, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
Dummy = readb(apbs[IndexCard].RamIO + VERS);
#ifdef DEBUG
printk("Read from applicom card #%d. struct st_ram_io follows:", NumCard);
for (c = 0; c < sizeof(struct st_ram_io);) {
printk("\n%5.5X: %2.2X", c, ((unsigned char *)st_loc)[c]);
for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) {
printk(" %2.2X", ((unsigned char *)st_loc)[c]);
}
}
printk("\nstruct mailbox follows:");
for (c = 0; c < sizeof(struct mailbox);) {
printk("\n%5.5X: %2.2X", c, ((unsigned char *)mailbox)[c]);
for (c++; c % 8 && c < sizeof(struct mailbox); c++) {
printk(" %2.2X", ((unsigned char *)mailbox)[c]);
}
}
printk("\n");
#endif
return (sizeof(struct st_ram_io) + sizeof(struct mailbox));
}
static ssize_t ac_read (struct file *filp, char __user *buf, size_t count, loff_t *ptr)
{
unsigned long flags;
unsigned int i;
unsigned char tmp;
int ret = 0;
DECLARE_WAITQUEUE(wait, current);
#ifdef DEBUG
int loopcount=0;
#endif
/* No need to ratelimit this. Only root can trigger it anyway */
if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) {
printk( KERN_WARNING "Hmmm. read() of Applicom card, length %zd != expected %zd\n",
count,sizeof(struct st_ram_io) + sizeof(struct mailbox));
return -EINVAL;
}
while(1) {
/* Stick ourself on the wait queue */
set_current_state(TASK_INTERRUPTIBLE);
add_wait_queue(&FlagSleepRec, &wait);
/* Scan each board, looking for one which has a packet for us */
for (i=0; i < MAX_BOARD; i++) {
if (!apbs[i].RamIO)
continue;
spin_lock_irqsave(&apbs[i].mutex, flags);
tmp = readb(apbs[i].RamIO + DATA_TO_PC_READY);
if (tmp == 2) {
struct st_ram_io st_loc;
struct mailbox mailbox;
/* Got a packet for us */
ret = do_ac_read(i, buf, &st_loc, &mailbox);
spin_unlock_irqrestore(&apbs[i].mutex, flags);
set_current_state(TASK_RUNNING);
remove_wait_queue(&FlagSleepRec, &wait);
if (copy_to_user(buf, &st_loc, sizeof(st_loc)))
return -EFAULT;
if (copy_to_user(buf + sizeof(st_loc), &mailbox, sizeof(mailbox)))
return -EFAULT;
return tmp;
}
if (tmp > 2) {
/* Got an error */
Dummy = readb(apbs[i].RamIO + VERS);
spin_unlock_irqrestore(&apbs[i].mutex, flags);
set_current_state(TASK_RUNNING);
remove_wait_queue(&FlagSleepRec, &wait);
printk(KERN_WARNING "APPLICOM driver read error board %d, DataToPcReady = %d\n",
i,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY));
DeviceErrorCount++;
return -EIO;
}
/* Nothing for us. Try the next board */
Dummy = readb(apbs[i].RamIO + VERS);
spin_unlock_irqrestore(&apbs[i].mutex, flags);
} /* per board */
/* OK - No boards had data for us. Sleep now */
schedule();
remove_wait_queue(&FlagSleepRec, &wait);
if (signal_pending(current))
return -EINTR;
#ifdef DEBUG
if (loopcount++ > 2) {
printk(KERN_DEBUG "Looping in ac_read. loopcount %d\n", loopcount);
}
#endif
}
}
static irqreturn_t ac_interrupt(int vec, void *dev_instance, struct pt_regs *regs)
{
unsigned int i;
unsigned int FlagInt;
unsigned int LoopCount;
int handled = 0;
// printk("Applicom interrupt on IRQ %d occurred\n", vec);
LoopCount = 0;
do {
FlagInt = 0;
for (i = 0; i < MAX_BOARD; i++) {
/* Skip if this board doesn't exist */
if (!apbs[i].RamIO)
continue;
spin_lock(&apbs[i].mutex);
/* Skip if this board doesn't want attention */
if(readb(apbs[i].RamIO + RAM_IT_TO_PC) == 0) {
spin_unlock(&apbs[i].mutex);
continue;
}
handled = 1;
FlagInt = 1;
writeb(0, apbs[i].RamIO + RAM_IT_TO_PC);
if (readb(apbs[i].RamIO + DATA_TO_PC_READY) > 2) {
printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataToPcReady = %d\n",
i+1,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY));
DeviceErrorCount++;
}
if((readb(apbs[i].RamIO + DATA_FROM_PC_READY) > 2) &&
(readb(apbs[i].RamIO + DATA_FROM_PC_READY) != 6)) {
printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataFromPcReady = %d\n",
i+1,(int)readb(apbs[i].RamIO + DATA_FROM_PC_READY));
DeviceErrorCount++;
}
if (readb(apbs[i].RamIO + DATA_TO_PC_READY) == 2) { /* mailbox sent by the card ? */
if (waitqueue_active(&FlagSleepRec)) {
wake_up_interruptible(&FlagSleepRec);
}
}
if (readb(apbs[i].RamIO + DATA_FROM_PC_READY) == 0) { /* ram i/o free for write by pc ? */
if (waitqueue_active(&apbs[i].FlagSleepSend)) { /* process sleep during read ? */
wake_up_interruptible(&apbs[i].FlagSleepSend);
}
}
Dummy = readb(apbs[i].RamIO + VERS);
if(readb(apbs[i].RamIO + RAM_IT_TO_PC)) {
/* There's another int waiting on this card */
spin_unlock(&apbs[i].mutex);
i--;
} else {
spin_unlock(&apbs[i].mutex);
}
}
if (FlagInt)
LoopCount = 0;
else
LoopCount++;
} while(LoopCount < 2);
return IRQ_RETVAL(handled);
}
static int ac_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{ /* @ ADG ou ATO selon le cas */
int i;
unsigned char IndexCard;
void __iomem *pmem;
int ret = 0;
volatile unsigned char byte_reset_it;
struct st_ram_io *adgl;
void __user *argp = (void __user *)arg;
/* In general, the device is only openable by root anyway, so we're not
particularly concerned that bogus ioctls can flood the console. */
adgl = kmalloc(sizeof(struct st_ram_io), GFP_KERNEL);
if (!adgl)
return -ENOMEM;
if (copy_from_user(adgl, argp, sizeof(struct st_ram_io))) {
kfree(adgl);
return -EFAULT;
}
IndexCard = adgl->num_card-1;
if(cmd != 0 && cmd != 6 &&
((IndexCard >= MAX_BOARD) || !apbs[IndexCard].RamIO)) {
static int warncount = 10;
if (warncount) {
printk( KERN_WARNING "APPLICOM driver IOCTL, bad board number %d\n",(int)IndexCard+1);
warncount--;
}
kfree(adgl);
return -EINVAL;
}
switch (cmd) {
case 0:
pmem = apbs[IndexCard].RamIO;
for (i = 0; i < sizeof(struct st_ram_io); i++)
((unsigned char *)adgl)[i]=readb(pmem++);
if (copy_to_user(argp, adgl, sizeof(struct st_ram_io)))
ret = -EFAULT;
break;
case 1:
pmem = apbs[IndexCard].RamIO + CONF_END_TEST;
for (i = 0; i < 4; i++)
adgl->conf_end_test[i] = readb(pmem++);
for (i = 0; i < 2; i++)
adgl->error_code[i] = readb(pmem++);
for (i = 0; i < 4; i++)
adgl->parameter_error[i] = readb(pmem++);
pmem = apbs[IndexCard].RamIO + VERS;
adgl->vers = readb(pmem);
pmem = apbs[IndexCard].RamIO + TYPE_CARD;
for (i = 0; i < 20; i++)
adgl->reserv1[i] = readb(pmem++);
*(int *)&adgl->reserv1[20] =
(readb(apbs[IndexCard].RamIO + SERIAL_NUMBER) << 16) +
(readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 1) << 8) +
(readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 2) );
if (copy_to_user(argp, adgl, sizeof(struct st_ram_io)))
ret = -EFAULT;
break;
case 2:
pmem = apbs[IndexCard].RamIO + CONF_END_TEST;
for (i = 0; i < 10; i++)
writeb(0xff, pmem++);
writeb(adgl->data_from_pc_ready,
apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
for (i = 0; i < MAX_BOARD; i++) {
if (apbs[i].RamIO) {
byte_reset_it = readb(apbs[i].RamIO + RAM_IT_TO_PC);
}
}
break;
case 3:
pmem = apbs[IndexCard].RamIO + TIC_DES_FROM_PC;
writeb(adgl->tic_des_from_pc, pmem);
break;
case 4:
pmem = apbs[IndexCard].RamIO + TIC_OWNER_TO_PC;
adgl->tic_owner_to_pc = readb(pmem++);
adgl->numcard_owner_to_pc = readb(pmem);
if (copy_to_user(argp, adgl,sizeof(struct st_ram_io)))
ret = -EFAULT;
break;
case 5:
writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC);
writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC);
writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC);
writeb(4, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
break;
case 6:
printk(KERN_INFO "APPLICOM driver release .... V2.8.0 ($Revision: 1.30 $)\n");
printk(KERN_INFO "Number of installed boards . %d\n", (int) numboards);
printk(KERN_INFO "Segment of board ........... %X\n", (int) mem);
printk(KERN_INFO "Interrupt IRQ number ....... %d\n", (int) irq);
for (i = 0; i < MAX_BOARD; i++) {
int serial;
char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1];
if (!apbs[i].RamIO)
continue;
for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++)
boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial);
boardname[serial] = 0;
printk(KERN_INFO "Prom version board %d ....... V%d.%d %s",
i+1,
(int)(readb(apbs[IndexCard].RamIO + VERS) >> 4),
(int)(readb(apbs[IndexCard].RamIO + VERS) & 0xF),
boardname);
serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) +
(readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) +
(readb(apbs[i].RamIO + SERIAL_NUMBER + 2) );
if (serial != 0)
printk(" S/N %d\n", serial);
else
printk("\n");
}
if (DeviceErrorCount != 0)
printk(KERN_INFO "DeviceErrorCount ........... %d\n", DeviceErrorCount);
if (ReadErrorCount != 0)
printk(KERN_INFO "ReadErrorCount ............. %d\n", ReadErrorCount);
if (WriteErrorCount != 0)
printk(KERN_INFO "WriteErrorCount ............ %d\n", WriteErrorCount);
if (waitqueue_active(&FlagSleepRec))
printk(KERN_INFO "Process in read pending\n");
for (i = 0; i < MAX_BOARD; i++) {
if (apbs[i].RamIO && waitqueue_active(&apbs[i].FlagSleepSend))
printk(KERN_INFO "Process in write pending board %d\n",i+1);
}
break;
default:
printk(KERN_INFO "APPLICOM driver ioctl, unknown function code %d\n",cmd) ;
ret = -EINVAL;
break;
}
Dummy = readb(apbs[IndexCard].RamIO + VERS);
kfree(adgl);
return 0;
}