xHCI: report USB3.0 portstatus comply with USB3.0 specification
USB3.0 specification has different wPortStatus and wPortChange definitions
from USB2.0 specification. Since USB3 root hub and USB2 root hub are split
now and USB3 hub only has USB3 protocol ports, we should modify the
portstatus and portchange report of USB3 ports to comply with USB3.0
specification.
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 93720bd..dcd78c1 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -379,15 +379,6 @@
*status = le16_to_cpu(hub->status->port.wPortStatus);
*change = le16_to_cpu(hub->status->port.wPortChange);
- if ((hub->hdev->parent != NULL) &&
- hub_is_superspeed(hub->hdev)) {
- /* Translate the USB 3 port status */
- u16 tmp = *status & USB_SS_PORT_STAT_MASK;
- if (*status & USB_SS_PORT_STAT_POWER)
- tmp |= USB_PORT_STAT_POWER;
- *status = tmp;
- }
-
ret = 0;
}
mutex_unlock(&hub->status_mutex);
@@ -2160,11 +2151,40 @@
return status;
}
+/* Check if a port is power on */
+static int port_is_power_on(struct usb_hub *hub, unsigned portstatus)
+{
+ int ret = 0;
+
+ if (hub_is_superspeed(hub->hdev)) {
+ if (portstatus & USB_SS_PORT_STAT_POWER)
+ ret = 1;
+ } else {
+ if (portstatus & USB_PORT_STAT_POWER)
+ ret = 1;
+ }
+
+ return ret;
+}
+
#ifdef CONFIG_PM
-#define MASK_BITS (USB_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION | \
- USB_PORT_STAT_SUSPEND)
-#define WANT_BITS (USB_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION)
+/* Check if a port is suspended(USB2.0 port) or in U3 state(USB3.0 port) */
+static int port_is_suspended(struct usb_hub *hub, unsigned portstatus)
+{
+ int ret = 0;
+
+ if (hub_is_superspeed(hub->hdev)) {
+ if ((portstatus & USB_PORT_STAT_LINK_STATE)
+ == USB_SS_PORT_LS_U3)
+ ret = 1;
+ } else {
+ if (portstatus & USB_PORT_STAT_SUSPEND)
+ ret = 1;
+ }
+
+ return ret;
+}
/* Determine whether the device on a port is ready for a normal resume,
* is ready for a reset-resume, or should be disconnected.
@@ -2174,7 +2194,9 @@
int status, unsigned portchange, unsigned portstatus)
{
/* Is the device still present? */
- if (status || (portstatus & MASK_BITS) != WANT_BITS) {
+ if (status || port_is_suspended(hub, portstatus) ||
+ !port_is_power_on(hub, portstatus) ||
+ !(portstatus & USB_PORT_STAT_CONNECTION)) {
if (status >= 0)
status = -ENODEV;
}
@@ -2439,7 +2461,7 @@
/* Skip the initial Clear-Suspend step for a remote wakeup */
status = hub_port_status(hub, port1, &portstatus, &portchange);
- if (status == 0 && !(portstatus & USB_PORT_STAT_SUSPEND))
+ if (status == 0 && !port_is_suspended(hub, portstatus))
goto SuspendCleared;
// dev_dbg(hub->intfdev, "resume port %d\n", port1);
@@ -3147,7 +3169,7 @@
/* maybe switch power back on (e.g. root hub was reset) */
if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
- && !(portstatus & USB_PORT_STAT_POWER))
+ && !port_is_power_on(hub, portstatus))
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
if (portstatus & USB_PORT_STAT_ENABLE)