V4L (0979): Added V4L support for the Nova-S-Plus and Nova-SE2 DVB-S products
- Added V4L support for the Nova-S-Plus and Nova-SE2 DVB-S products.
- Basic DVB-S support is working, analog video inputs work.
- It has one or two fixme comments, primarily analog GPIOs (audio) and eeprom parsing.
- CX24123 code (in cx88-dvb.c) disabled until the
- cx24123 module is added to dvb-kernel cvs.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 951709a..d738ea8 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -897,6 +897,37 @@
.gpio3 = 0x0000,
}},
},
+ [CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1] = {
+ .name = "Hauppauge Nova-S-Plus DVB-S",
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ /* fixme: add the analog gpio stuff here */
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ },{
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ },{
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ }},
+ .dvb = 1,
+ },
+ [CX88_BOARD_HAUPPAUGE_NOVASE2_S1] = {
+ .name = "Hauppauge Nova-SE2 DVB-S",
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ }},
+ .dvb = 1,
+ },
};
const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
@@ -1044,6 +1075,14 @@
.subvendor = 0x1461,
.subdevice = 0x000a,
.card = CX88_BOARD_AVERTV_303,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x9200,
+ .card = CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x9202,
+ .card = CX88_BOARD_HAUPPAUGE_NOVASE2_S1,
},
};
const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
@@ -1211,6 +1250,8 @@
if (0 == core->i2c_rc)
leadtek_eeprom(core,eeprom);
break;
+ case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
+ case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
case CX88_BOARD_HAUPPAUGE_DVB_T1:
if (0 == core->i2c_rc)
hauppauge_eeprom(core,eeprom);