ARM: vexpress: switch Versatile Express to use consolidated CLCD
This switches Versatile Express to use the conslidated CLCD panel
support, including the display capabilities. As Versatile Express uses
a PL111, it can support the full range of pixel formats - 444, 5551,
565 in both RGB and BGR mode.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7ee15c2..4f0e83e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -274,6 +274,7 @@
select HAVE_PATA_PLATFORM
select ICST
select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLCD
help
This enables support for the ARM Ltd Versatile Express boards.
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index e628402..27baed1 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -30,6 +30,8 @@
#include <mach/motherboard.h>
+#include <plat/clcd.h>
+
#define V2M_PA_CS7 0x10000000
static struct map_desc ct_ca9x4_io_desc[] __initdata = {
@@ -80,29 +82,6 @@
};
#endif
-static struct clcd_panel xvga_panel = {
- .mode = {
- .name = "XVGA",
- .refresh = 60,
- .xres = 1024,
- .yres = 768,
- .pixclock = 15384,
- .left_margin = 168,
- .right_margin = 8,
- .upper_margin = 29,
- .lower_margin = 3,
- .hsync_len = 144,
- .vsync_len = 6,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_BCD | TIM2_IPC,
- .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
- .bpp = 16,
-};
-
static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
{
v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0);
@@ -112,42 +91,23 @@
static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
{
unsigned long framesize = 1024 * 768 * 2;
- dma_addr_t dma;
- fb->panel = &xvga_panel;
+ fb->panel = versatile_clcd_get_panel("XVGA");
+ if (!fb->panel)
+ return -EINVAL;
- fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
- &dma, GFP_KERNEL);
- if (!fb->fb.screen_base) {
- printk(KERN_ERR "CLCD: unable to map frame buffer\n");
- return -ENOMEM;
- }
- fb->fb.fix.smem_start = dma;
- fb->fb.fix.smem_len = framesize;
-
- return 0;
-}
-
-static int ct_ca9x4_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
- return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base,
- fb->fb.fix.smem_start, fb->fb.fix.smem_len);
-}
-
-static void ct_ca9x4_clcd_remove(struct clcd_fb *fb)
-{
- dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
- fb->fb.screen_base, fb->fb.fix.smem_start);
+ return versatile_clcd_setup_dma(fb, framesize);
}
static struct clcd_board ct_ca9x4_clcd_data = {
.name = "CT-CA9X4",
+ .caps = CLCD_CAP_5551 | CLCD_CAP_565,
.check = clcdfb_check,
.decode = clcdfb_decode,
.enable = ct_ca9x4_clcd_enable,
.setup = ct_ca9x4_clcd_setup,
- .mmap = ct_ca9x4_clcd_mmap,
- .remove = ct_ca9x4_clcd_remove,
+ .mmap = versatile_clcd_mmap_dma,
+ .remove = versatile_clcd_remove_dma,
};
static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);