arm/dt: msm8226: add sdcc support
This patch adds sdcc slot 1 and 2 information specific to CDP,
MTP and QRD platforms.
Change-Id: I53e22448e54e8c593d5eb6e0f7aa72178bfa2b12
Signed-off-by: Krishna Konda <kkonda@codeaurora.org>
diff --git a/arch/arm/boot/dts/msm8226-cdp.dts b/arch/arm/boot/dts/msm8226-cdp.dts
index 1c431e8..f01491f 100644
--- a/arch/arm/boot/dts/msm8226-cdp.dts
+++ b/arch/arm/boot/dts/msm8226-cdp.dts
@@ -22,3 +22,66 @@
status = "ok";
};
};
+
+&sdcc1 {
+ vdd-supply = <&pm8226_l17>;
+ qcom,vdd-always-on;
+ qcom,vdd-lpm-sup;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <800 500000>;
+
+ vdd-io-supply = <&pm8226_l6>;
+ qcom,vdd-io-always-on;
+ qcom,vdd-io-voltage-level = <1800000 1800000>;
+ qcom,vdd-io-current-level = <250 154000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 16mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+ qcom,sup-voltages = <2950 2950>;
+
+ qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
+ qcom,nonremovable;
+
+ status = "ok";
+};
+
+&sdcc2 {
+ vdd-supply = <&pm8226_l18>;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <9000 800000>;
+
+ vdd-io-supply = <&pm8226_l21>;
+ qcom,vdd-io-always-on;
+ qcom,vdd-io-lpm-sup;
+ qcom,vdd-io-voltage-level = <1800000 2950000>;
+ qcom,vdd-io-current-level = <6 22000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 16mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+ qcom,sup-voltages = <2950 2950>;
+
+ qcom,xpc;
+ qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
+ qcom,current-limit = <600>;
+
+ #address-cells = <0>;
+ interrupt-parent = <&sdcc2>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xffffffff>;
+ interrupt-map = <0 &intc 0 125 0
+ 1 &intc 0 220 0
+ 2 &msmgpio 38 0x3>;
+ interrupt-names = "core_irq", "bam_irq", "status_irq";
+ cd-gpios = <&msmgpio 38 0x1>;
+
+ status = "ok";
+};
diff --git a/arch/arm/boot/dts/msm8226-mtp.dts b/arch/arm/boot/dts/msm8226-mtp.dts
index ef0fdc0..0242540 100644
--- a/arch/arm/boot/dts/msm8226-mtp.dts
+++ b/arch/arm/boot/dts/msm8226-mtp.dts
@@ -22,3 +22,63 @@
status = "ok";
};
};
+
+&sdcc1 {
+ vdd-supply = <&pm8226_l17>;
+ qcom,vdd-always-on;
+ qcom,vdd-lpm-sup;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <800 500000>;
+
+ vdd-io-supply = <&pm8226_l6>;
+ qcom,vdd-io-always-on;
+ qcom,vdd-io-voltage-level = <1800000 1800000>;
+ qcom,vdd-io-current-level = <250 154000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 16mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+ qcom,sup-voltages = <2950 2950>;
+
+ qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
+ qcom,nonremovable;
+
+ status = "ok";
+};
+
+&sdcc2 {
+ vdd-supply = <&pm8226_l18>;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <9000 800000>;
+
+ vdd-io-supply = <&pm8226_l21>;
+ qcom,vdd-io-always-on;
+ qcom,vdd-io-lpm-sup;
+ qcom,vdd-io-voltage-level = <1800000 2950000>;
+ qcom,vdd-io-current-level = <6 22000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 16mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+ qcom,sup-voltages = <2950 2950>;
+
+ qcom,xpc;
+ qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
+ qcom,current-limit = <600>; #address-cells = <0>; interrupt-parent = <&sdcc2>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xffffffff>;
+ interrupt-map = <0 &intc 0 125 0
+ 1 &intc 0 220 0
+ 2 &msmgpio 38 0x3>;
+ interrupt-names = "core_irq", "bam_irq", "status_irq";
+ cd-gpios = <&msmgpio 38 0x1>;
+
+ status = "ok";
+};
diff --git a/arch/arm/boot/dts/msm8226-qrd.dts b/arch/arm/boot/dts/msm8226-qrd.dts
index 7909435..65d4b33 100644
--- a/arch/arm/boot/dts/msm8226-qrd.dts
+++ b/arch/arm/boot/dts/msm8226-qrd.dts
@@ -22,3 +22,66 @@
status = "ok";
};
};
+
+&sdcc1 {
+ vdd-supply = <&pm8226_l17>;
+ qcom,vdd-always-on;
+ qcom,vdd-lpm-sup;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <800 500000>;
+
+ vdd-io-supply = <&pm8226_l6>;
+ qcom,vdd-io-always-on;
+ qcom,vdd-io-voltage-level = <1800000 1800000>;
+ qcom,vdd-io-current-level = <250 154000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 16mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+ qcom,sup-voltages = <2950 2950>;
+
+ qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
+ qcom,nonremovable;
+
+ status = "ok";
+};
+
+&sdcc2 {
+ vdd-supply = <&pm8226_l18>;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <9000 800000>;
+
+ vdd-io-supply = <&pm8226_l21>;
+ qcom,vdd-io-always-on;
+ qcom,vdd-io-lpm-sup;
+ qcom,vdd-io-voltage-level = <1800000 2950000>;
+ qcom,vdd-io-current-level = <6 22000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 16mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+ qcom,sup-voltages = <2950 2950>;
+
+ qcom,xpc;
+ qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
+ qcom,current-limit = <600>;
+
+ #address-cells = <0>;
+ interrupt-parent = <&sdcc2>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xffffffff>;
+ interrupt-map = <0 &intc 0 125 0
+ 1 &intc 0 220 0
+ 2 &msmgpio 38 0x3>;
+ interrupt-names = "core_irq", "bam_irq", "status_irq";
+ cd-gpios = <&msmgpio 38 0x1>;
+
+ status = "ok";
+};