[SCSI] convert ninja driver to struct scsi_cmnd
Changes the obsolete typedefd Scsi_Cmnd to struct scsi_cmnd in
the ninja scsi pcmcia driver.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index b1d3460..f2d79c3 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -183,7 +183,7 @@
* Clenaup parameters and call done() functions.
* You must be set SCpnt->result before call this function.
*/
-static void nsp_scsi_done(Scsi_Cmnd *SCpnt)
+static void nsp_scsi_done(struct scsi_cmnd *SCpnt)
{
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
@@ -192,7 +192,8 @@
SCpnt->scsi_done(SCpnt);
}
-static int nsp_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
+static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
+ void (*done)(struct scsi_cmnd *))
{
#ifdef NSP_DEBUG
/*unsigned int host_id = SCpnt->device->host->this_id;*/
@@ -365,7 +366,7 @@
/*
* Start selection phase
*/
-static int nsphw_start_selection(Scsi_Cmnd *SCpnt)
+static int nsphw_start_selection(struct scsi_cmnd *SCpnt)
{
unsigned int host_id = SCpnt->device->host->this_id;
unsigned int base = SCpnt->device->host->io_port;
@@ -446,7 +447,7 @@
/*
* setup synchronous data transfer mode
*/
-static int nsp_analyze_sdtr(Scsi_Cmnd *SCpnt)
+static int nsp_analyze_sdtr(struct scsi_cmnd *SCpnt)
{
unsigned char target = scmd_id(SCpnt);
// unsigned char lun = SCpnt->device->lun;
@@ -504,7 +505,7 @@
/*
* start ninja hardware timer
*/
-static void nsp_start_timer(Scsi_Cmnd *SCpnt, int time)
+static void nsp_start_timer(struct scsi_cmnd *SCpnt, int time)
{
unsigned int base = SCpnt->device->host->io_port;
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
@@ -517,7 +518,8 @@
/*
* wait for bus phase change
*/
-static int nsp_negate_signal(Scsi_Cmnd *SCpnt, unsigned char mask, char *str)
+static int nsp_negate_signal(struct scsi_cmnd *SCpnt, unsigned char mask,
+ char *str)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned char reg;
@@ -544,9 +546,9 @@
/*
* expect Ninja Irq
*/
-static int nsp_expect_signal(Scsi_Cmnd *SCpnt,
- unsigned char current_phase,
- unsigned char mask)
+static int nsp_expect_signal(struct scsi_cmnd *SCpnt,
+ unsigned char current_phase,
+ unsigned char mask)
{
unsigned int base = SCpnt->device->host->io_port;
int time_out;
@@ -579,7 +581,7 @@
/*
* transfer SCSI message
*/
-static int nsp_xfer(Scsi_Cmnd *SCpnt, int phase)
+static int nsp_xfer(struct scsi_cmnd *SCpnt, int phase)
{
unsigned int base = SCpnt->device->host->io_port;
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
@@ -619,7 +621,7 @@
/*
* get extra SCSI data from fifo
*/
-static int nsp_dataphase_bypass(Scsi_Cmnd *SCpnt)
+static int nsp_dataphase_bypass(struct scsi_cmnd *SCpnt)
{
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
unsigned int count;
@@ -651,7 +653,7 @@
/*
* accept reselection
*/
-static int nsp_reselected(Scsi_Cmnd *SCpnt)
+static int nsp_reselected(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned int host_id = SCpnt->device->host->this_id;
@@ -690,7 +692,7 @@
/*
* count how many data transferd
*/
-static int nsp_fifo_count(Scsi_Cmnd *SCpnt)
+static int nsp_fifo_count(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned int count;
@@ -717,7 +719,7 @@
/*
* read data in DATA IN phase
*/
-static void nsp_pio_read(Scsi_Cmnd *SCpnt)
+static void nsp_pio_read(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned long mmio_base = SCpnt->device->host->base;
@@ -812,7 +814,7 @@
/*
* write data in DATA OUT phase
*/
-static void nsp_pio_write(Scsi_Cmnd *SCpnt)
+static void nsp_pio_write(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned long mmio_base = SCpnt->device->host->base;
@@ -905,7 +907,7 @@
/*
* setup synchronous/asynchronous data transfer mode
*/
-static int nsp_nexus(Scsi_Cmnd *SCpnt)
+static int nsp_nexus(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned char target = scmd_id(SCpnt);
@@ -952,7 +954,7 @@
{
unsigned int base;
unsigned char irq_status, irq_phase, phase;
- Scsi_Cmnd *tmpSC;
+ struct scsi_cmnd *tmpSC;
unsigned char target, lun;
unsigned int *sync_neg;
int i, tmp;
@@ -1530,7 +1532,7 @@
/*---------------------------------------------------------------*/
/*
-static int nsp_eh_abort(Scsi_Cmnd *SCpnt)
+static int nsp_eh_abort(struct scsi_cmnd *SCpnt)
{
nsp_dbg(NSP_DEBUG_BUSRESET, "SCpnt=0x%p", SCpnt);
@@ -1558,7 +1560,7 @@
return SUCCESS;
}
-static int nsp_eh_bus_reset(Scsi_Cmnd *SCpnt)
+static int nsp_eh_bus_reset(struct scsi_cmnd *SCpnt)
{
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
@@ -1567,7 +1569,7 @@
return nsp_bus_reset(data);
}
-static int nsp_eh_host_reset(Scsi_Cmnd *SCpnt)
+static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt)
{
nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;