bcma: add support for on-chip OTP memory used for SPROM storage
Wireless Broadcom chips can have either their SPROM data stored
on either external SPROM or on-chip OTP memory. Both are accessed
through the same register space. This patch adds support for the
on-chip OTP memory.
Tested with:
BCM43224 OTP and SPROM
BCM4331 SPROM
BCM4313 OTP
This patch is in response to linux-wireless thread [1].
[1] http://article.gmane.org/gmane.linux.kernel.wireless.general/85426
Tested-by: Saul St. John <saul.stjohn@gmail.com>
Tested-by: Rafal Milecki <zajec5@gmail.com>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c
index fba8066..cdcf75c 100644
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -300,37 +300,128 @@
SSB_SROM8_FEM_ANTSWLUT_SHIFT);
}
-static bool bcma_is_sprom_available(struct bcma_bus *bus)
+/*
+ * Indicates the presence of external SPROM.
+ */
+static bool bcma_sprom_ext_available(struct bcma_bus *bus)
{
- u32 sromctrl;
+ u32 chip_status;
+ u32 srom_control;
+ u32 present_mask;
- if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
- return false;
+ if (bus->drv_cc.core->id.rev >= 31) {
+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
+ return false;
- if (bus->drv_cc.core->id.rev >= 32) {
- sromctrl = bcma_read32(bus->drv_cc.core, BCMA_CC_SROM_CONTROL);
- return sromctrl & BCMA_CC_SROM_CONTROL_PRESENT;
+ srom_control = bcma_read32(bus->drv_cc.core,
+ BCMA_CC_SROM_CONTROL);
+ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT;
}
- return true;
+
+ /* older chipcommon revisions use chip status register */
+ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT);
+ switch (bus->chipinfo.id) {
+ case 0x4313:
+ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT;
+ break;
+
+ case 0x4331:
+ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT;
+ break;
+
+ default:
+ return true;
+ }
+
+ return chip_status & present_mask;
+}
+
+/*
+ * Indicates that on-chip OTP memory is present and enabled.
+ */
+static bool bcma_sprom_onchip_available(struct bcma_bus *bus)
+{
+ u32 chip_status;
+ u32 otpsize = 0;
+ bool present;
+
+ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT);
+ switch (bus->chipinfo.id) {
+ case 0x4313:
+ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT;
+ break;
+
+ case 0x4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
+
+ case 43224:
+ case 43225:
+ /* for these chips OTP is always available */
+ present = true;
+ break;
+
+ default:
+ present = false;
+ break;
+ }
+
+ if (present) {
+ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS;
+ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT;
+ }
+
+ return otpsize != 0;
+}
+
+/*
+ * Verify OTP is filled and determine the byte
+ * offset where SPROM data is located.
+ *
+ * On error, returns 0; byte offset otherwise.
+ */
+static int bcma_sprom_onchip_offset(struct bcma_bus *bus)
+{
+ struct bcma_device *cc = bus->drv_cc.core;
+ u32 offset;
+
+ /* verify OTP status */
+ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0)
+ return 0;
+
+ /* obtain bit offset from otplayout register */
+ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET);
+ return BCMA_CC_SPROM + (offset >> 3);
}
int bcma_sprom_get(struct bcma_bus *bus)
{
- u16 offset;
+ u16 offset = BCMA_CC_SPROM;
u16 *sprom;
int err = 0;
if (!bus->drv_cc.core)
return -EOPNOTSUPP;
- if (!bcma_is_sprom_available(bus)) {
+ if (!bcma_sprom_ext_available(bus)) {
/*
- * Maybe there is no SPROM on the device?
- * Now we ask the arch code if there is some sprom
- * available for this device in some other storage.
+ * External SPROM takes precedence so check
+ * on-chip OTP only when no external SPROM
+ * is present.
*/
- err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
- return err;
+ if (bcma_sprom_onchip_available(bus)) {
+ /* determine offset */
+ offset = bcma_sprom_onchip_offset(bus);
+ }
+ if (!offset) {
+ /*
+ * Maybe there is no SPROM on the device?
+ * Now we ask the arch code if there is some sprom
+ * available for this device in some other storage.
+ */
+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
+ return err;
+ }
}
sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
@@ -341,11 +432,6 @@
if (bus->chipinfo.id == 0x4331)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
- /* Most cards have SPROM moved by additional offset 0x30 (48 dwords).
- * According to brcm80211 this applies to cards with PCIe rev >= 6
- * TODO: understand this condition and use it */
- offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
- BCMA_CC_SPROM_PCIE6;
pr_debug("SPROM offset 0x%x\n", offset);
bcma_sprom_read(bus, offset, sprom);
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index e72938b..8bbfe31 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -56,6 +56,9 @@
#define BCMA_CC_OTPS_HW_PROTECT 0x00000001
#define BCMA_CC_OTPS_SW_PROTECT 0x00000002
#define BCMA_CC_OTPS_CID_PROTECT 0x00000004
+#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */
+#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8
+#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */
#define BCMA_CC_OTPC 0x0014 /* OTP control */
#define BCMA_CC_OTPC_RECWAIT 0xFF000000
#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00
@@ -72,6 +75,8 @@
#define BCMA_CC_OTPP_READ 0x40000000
#define BCMA_CC_OTPP_START 0x80000000
#define BCMA_CC_OTPP_BUSY 0x80000000
+#define BCMA_CC_OTPL 0x001C /* OTP layout */
+#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */
#define BCMA_CC_IRQSTAT 0x0020
#define BCMA_CC_IRQMASK 0x0024
#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
@@ -79,6 +84,10 @@
#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
+#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1
+#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2
+#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2
+#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4
#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
#define BCMA_CC_JCMD_START 0x80000000
#define BCMA_CC_JCMD_BUSY 0x80000000
@@ -256,7 +265,6 @@
#define BCMA_CC_PLLCTL_ADDR 0x0660
#define BCMA_CC_PLLCTL_DATA 0x0664
#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
-#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */
/* Divider allocation in 4716/47162/5356 */
#define BCMA_CC_PMU5_MAINPLL_CPU 1