| /* |
| * linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver |
| * |
| * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/highmem.h> |
| #include <linux/pci.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/scatterlist.h> |
| |
| #include <linux/mmc/host.h> |
| |
| #include <asm/scatterlist.h> |
| |
| #include "sdhci.h" |
| |
| #define DRIVER_NAME "sdhci" |
| |
| #define DBG(f, x...) \ |
| pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x) |
| |
| static unsigned int debug_quirks = 0; |
| |
| #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) |
| #define SDHCI_QUIRK_FORCE_DMA (1<<1) |
| /* Controller doesn't like some resets when there is no card inserted. */ |
| #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) |
| #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) |
| #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) |
| #define SDHCI_QUIRK_BROKEN_DMA (1<<5) |
| |
| static const struct pci_device_id pci_ids[] __devinitdata = { |
| { |
| .vendor = PCI_VENDOR_ID_RICOH, |
| .device = PCI_DEVICE_ID_RICOH_R5C822, |
| .subvendor = PCI_VENDOR_ID_IBM, |
| .subdevice = PCI_ANY_ID, |
| .driver_data = SDHCI_QUIRK_CLOCK_BEFORE_RESET | |
| SDHCI_QUIRK_FORCE_DMA, |
| }, |
| |
| { |
| .vendor = PCI_VENDOR_ID_RICOH, |
| .device = PCI_DEVICE_ID_RICOH_R5C822, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .driver_data = SDHCI_QUIRK_FORCE_DMA | |
| SDHCI_QUIRK_NO_CARD_NO_RESET, |
| }, |
| |
| { |
| .vendor = PCI_VENDOR_ID_TI, |
| .device = PCI_DEVICE_ID_TI_XX21_XX11_SD, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .driver_data = SDHCI_QUIRK_FORCE_DMA, |
| }, |
| |
| { |
| .vendor = PCI_VENDOR_ID_ENE, |
| .device = PCI_DEVICE_ID_ENE_CB712_SD, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | |
| SDHCI_QUIRK_BROKEN_DMA, |
| }, |
| |
| { |
| .vendor = PCI_VENDOR_ID_ENE, |
| .device = PCI_DEVICE_ID_ENE_CB712_SD_2, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | |
| SDHCI_QUIRK_BROKEN_DMA, |
| }, |
| |
| { |
| .vendor = PCI_VENDOR_ID_ENE, |
| .device = PCI_DEVICE_ID_ENE_CB714_SD, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | |
| SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS, |
| }, |
| |
| { |
| .vendor = PCI_VENDOR_ID_ENE, |
| .device = PCI_DEVICE_ID_ENE_CB714_SD_2, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | |
| SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS, |
| }, |
| |
| { /* Generic SD host controller */ |
| PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) |
| }, |
| |
| { /* end: all zeroes */ }, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, pci_ids); |
| |
| static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *); |
| static void sdhci_finish_data(struct sdhci_host *); |
| |
| static void sdhci_send_command(struct sdhci_host *, struct mmc_command *); |
| static void sdhci_finish_command(struct sdhci_host *); |
| |
| static void sdhci_dumpregs(struct sdhci_host *host) |
| { |
| printk(KERN_DEBUG DRIVER_NAME ": ============== REGISTER DUMP ==============\n"); |
| |
| printk(KERN_DEBUG DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n", |
| readl(host->ioaddr + SDHCI_DMA_ADDRESS), |
| readw(host->ioaddr + SDHCI_HOST_VERSION)); |
| printk(KERN_DEBUG DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n", |
| readw(host->ioaddr + SDHCI_BLOCK_SIZE), |
| readw(host->ioaddr + SDHCI_BLOCK_COUNT)); |
| printk(KERN_DEBUG DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n", |
| readl(host->ioaddr + SDHCI_ARGUMENT), |
| readw(host->ioaddr + SDHCI_TRANSFER_MODE)); |
| printk(KERN_DEBUG DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n", |
| readl(host->ioaddr + SDHCI_PRESENT_STATE), |
| readb(host->ioaddr + SDHCI_HOST_CONTROL)); |
| printk(KERN_DEBUG DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n", |
| readb(host->ioaddr + SDHCI_POWER_CONTROL), |
| readb(host->ioaddr + SDHCI_BLOCK_GAP_CONTROL)); |
| printk(KERN_DEBUG DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n", |
| readb(host->ioaddr + SDHCI_WAKE_UP_CONTROL), |
| readw(host->ioaddr + SDHCI_CLOCK_CONTROL)); |
| printk(KERN_DEBUG DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n", |
| readb(host->ioaddr + SDHCI_TIMEOUT_CONTROL), |
| readl(host->ioaddr + SDHCI_INT_STATUS)); |
| printk(KERN_DEBUG DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n", |
| readl(host->ioaddr + SDHCI_INT_ENABLE), |
| readl(host->ioaddr + SDHCI_SIGNAL_ENABLE)); |
| printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n", |
| readw(host->ioaddr + SDHCI_ACMD12_ERR), |
| readw(host->ioaddr + SDHCI_SLOT_INT_STATUS)); |
| printk(KERN_DEBUG DRIVER_NAME ": Caps: 0x%08x | Max curr: 0x%08x\n", |
| readl(host->ioaddr + SDHCI_CAPABILITIES), |
| readl(host->ioaddr + SDHCI_MAX_CURRENT)); |
| |
| printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n"); |
| } |
| |
| /*****************************************************************************\ |
| * * |
| * Low level functions * |
| * * |
| \*****************************************************************************/ |
| |
| static void sdhci_reset(struct sdhci_host *host, u8 mask) |
| { |
| unsigned long timeout; |
| |
| if (host->chip->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) { |
| if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & |
| SDHCI_CARD_PRESENT)) |
| return; |
| } |
| |
| writeb(mask, host->ioaddr + SDHCI_SOFTWARE_RESET); |
| |
| if (mask & SDHCI_RESET_ALL) |
| host->clock = 0; |
| |
| /* Wait max 100 ms */ |
| timeout = 100; |
| |
| /* hw clears the bit when it's done */ |
| while (readb(host->ioaddr + SDHCI_SOFTWARE_RESET) & mask) { |
| if (timeout == 0) { |
| printk(KERN_ERR "%s: Reset 0x%x never completed.\n", |
| mmc_hostname(host->mmc), (int)mask); |
| sdhci_dumpregs(host); |
| return; |
| } |
| timeout--; |
| mdelay(1); |
| } |
| } |
| |
| static void sdhci_init(struct sdhci_host *host) |
| { |
| u32 intmask; |
| |
| sdhci_reset(host, SDHCI_RESET_ALL); |
| |
| intmask = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | |
| SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | |
| SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT | |
| SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT | |
| SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | |
| SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE; |
| |
| writel(intmask, host->ioaddr + SDHCI_INT_ENABLE); |
| writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE); |
| } |
| |
| static void sdhci_activate_led(struct sdhci_host *host) |
| { |
| u8 ctrl; |
| |
| ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); |
| ctrl |= SDHCI_CTRL_LED; |
| writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); |
| } |
| |
| static void sdhci_deactivate_led(struct sdhci_host *host) |
| { |
| u8 ctrl; |
| |
| ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); |
| ctrl &= ~SDHCI_CTRL_LED; |
| writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); |
| } |
| |
| /*****************************************************************************\ |
| * * |
| * Core functions * |
| * * |
| \*****************************************************************************/ |
| |
| static inline char* sdhci_sg_to_buffer(struct sdhci_host* host) |
| { |
| return sg_virt(host->cur_sg); |
| } |
| |
| static inline int sdhci_next_sg(struct sdhci_host* host) |
| { |
| /* |
| * Skip to next SG entry. |
| */ |
| host->cur_sg++; |
| host->num_sg--; |
| |
| /* |
| * Any entries left? |
| */ |
| if (host->num_sg > 0) { |
| host->offset = 0; |
| host->remain = host->cur_sg->length; |
| } |
| |
| return host->num_sg; |
| } |
| |
| static void sdhci_read_block_pio(struct sdhci_host *host) |
| { |
| int blksize, chunk_remain; |
| u32 data; |
| char *buffer; |
| int size; |
| |
| DBG("PIO reading\n"); |
| |
| blksize = host->data->blksz; |
| chunk_remain = 0; |
| data = 0; |
| |
| buffer = sdhci_sg_to_buffer(host) + host->offset; |
| |
| while (blksize) { |
| if (chunk_remain == 0) { |
| data = readl(host->ioaddr + SDHCI_BUFFER); |
| chunk_remain = min(blksize, 4); |
| } |
| |
| size = min(host->remain, chunk_remain); |
| |
| chunk_remain -= size; |
| blksize -= size; |
| host->offset += size; |
| host->remain -= size; |
| |
| while (size) { |
| *buffer = data & 0xFF; |
| buffer++; |
| data >>= 8; |
| size--; |
| } |
| |
| if (host->remain == 0) { |
| if (sdhci_next_sg(host) == 0) { |
| BUG_ON(blksize != 0); |
| return; |
| } |
| buffer = sdhci_sg_to_buffer(host); |
| } |
| } |
| } |
| |
| static void sdhci_write_block_pio(struct sdhci_host *host) |
| { |
| int blksize, chunk_remain; |
| u32 data; |
| char *buffer; |
| int bytes, size; |
| |
| DBG("PIO writing\n"); |
| |
| blksize = host->data->blksz; |
| chunk_remain = 4; |
| data = 0; |
| |
| bytes = 0; |
| buffer = sdhci_sg_to_buffer(host) + host->offset; |
| |
| while (blksize) { |
| size = min(host->remain, chunk_remain); |
| |
| chunk_remain -= size; |
| blksize -= size; |
| host->offset += size; |
| host->remain -= size; |
| |
| while (size) { |
| data >>= 8; |
| data |= (u32)*buffer << 24; |
| buffer++; |
| size--; |
| } |
| |
| if (chunk_remain == 0) { |
| writel(data, host->ioaddr + SDHCI_BUFFER); |
| chunk_remain = min(blksize, 4); |
| } |
| |
| if (host->remain == 0) { |
| if (sdhci_next_sg(host) == 0) { |
| BUG_ON(blksize != 0); |
| return; |
| } |
| buffer = sdhci_sg_to_buffer(host); |
| } |
| } |
| } |
| |
| static void sdhci_transfer_pio(struct sdhci_host *host) |
| { |
| u32 mask; |
| |
| BUG_ON(!host->data); |
| |
| if (host->num_sg == 0) |
| return; |
| |
| if (host->data->flags & MMC_DATA_READ) |
| mask = SDHCI_DATA_AVAILABLE; |
| else |
| mask = SDHCI_SPACE_AVAILABLE; |
| |
| while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) { |
| if (host->data->flags & MMC_DATA_READ) |
| sdhci_read_block_pio(host); |
| else |
| sdhci_write_block_pio(host); |
| |
| if (host->num_sg == 0) |
| break; |
| } |
| |
| DBG("PIO transfer complete.\n"); |
| } |
| |
| static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) |
| { |
| u8 count; |
| unsigned target_timeout, current_timeout; |
| |
| WARN_ON(host->data); |
| |
| if (data == NULL) |
| return; |
| |
| /* Sanity checks */ |
| BUG_ON(data->blksz * data->blocks > 524288); |
| BUG_ON(data->blksz > host->mmc->max_blk_size); |
| BUG_ON(data->blocks > 65535); |
| |
| host->data = data; |
| host->data_early = 0; |
| |
| /* timeout in us */ |
| target_timeout = data->timeout_ns / 1000 + |
| data->timeout_clks / host->clock; |
| |
| /* |
| * Figure out needed cycles. |
| * We do this in steps in order to fit inside a 32 bit int. |
| * The first step is the minimum timeout, which will have a |
| * minimum resolution of 6 bits: |
| * (1) 2^13*1000 > 2^22, |
| * (2) host->timeout_clk < 2^16 |
| * => |
| * (1) / (2) > 2^6 |
| */ |
| count = 0; |
| current_timeout = (1 << 13) * 1000 / host->timeout_clk; |
| while (current_timeout < target_timeout) { |
| count++; |
| current_timeout <<= 1; |
| if (count >= 0xF) |
| break; |
| } |
| |
| if (count >= 0xF) { |
| printk(KERN_WARNING "%s: Too large timeout requested!\n", |
| mmc_hostname(host->mmc)); |
| count = 0xE; |
| } |
| |
| writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL); |
| |
| if (host->flags & SDHCI_USE_DMA) { |
| int count; |
| |
| count = pci_map_sg(host->chip->pdev, data->sg, data->sg_len, |
| (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE); |
| BUG_ON(count != 1); |
| |
| writel(sg_dma_address(data->sg), host->ioaddr + SDHCI_DMA_ADDRESS); |
| } else { |
| host->cur_sg = data->sg; |
| host->num_sg = data->sg_len; |
| |
| host->offset = 0; |
| host->remain = host->cur_sg->length; |
| } |
| |
| /* We do not handle DMA boundaries, so set it to max (512 KiB) */ |
| writew(SDHCI_MAKE_BLKSZ(7, data->blksz), |
| host->ioaddr + SDHCI_BLOCK_SIZE); |
| writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT); |
| } |
| |
| static void sdhci_set_transfer_mode(struct sdhci_host *host, |
| struct mmc_data *data) |
| { |
| u16 mode; |
| |
| if (data == NULL) |
| return; |
| |
| WARN_ON(!host->data); |
| |
| mode = SDHCI_TRNS_BLK_CNT_EN; |
| if (data->blocks > 1) |
| mode |= SDHCI_TRNS_MULTI; |
| if (data->flags & MMC_DATA_READ) |
| mode |= SDHCI_TRNS_READ; |
| if (host->flags & SDHCI_USE_DMA) |
| mode |= SDHCI_TRNS_DMA; |
| |
| writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE); |
| } |
| |
| static void sdhci_finish_data(struct sdhci_host *host) |
| { |
| struct mmc_data *data; |
| u16 blocks; |
| |
| BUG_ON(!host->data); |
| |
| data = host->data; |
| host->data = NULL; |
| |
| if (host->flags & SDHCI_USE_DMA) { |
| pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len, |
| (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE); |
| } |
| |
| /* |
| * Controller doesn't count down when in single block mode. |
| */ |
| if (data->blocks == 1) |
| blocks = (data->error == 0) ? 0 : 1; |
| else |
| blocks = readw(host->ioaddr + SDHCI_BLOCK_COUNT); |
| data->bytes_xfered = data->blksz * (data->blocks - blocks); |
| |
| if (!data->error && blocks) { |
| printk(KERN_ERR "%s: Controller signalled completion even " |
| "though there were blocks left.\n", |
| mmc_hostname(host->mmc)); |
| data->error = -EIO; |
| } |
| |
| if (data->stop) { |
| /* |
| * The controller needs a reset of internal state machines |
| * upon error conditions. |
| */ |
| if (data->error) { |
| sdhci_reset(host, SDHCI_RESET_CMD); |
| sdhci_reset(host, SDHCI_RESET_DATA); |
| } |
| |
| sdhci_send_command(host, data->stop); |
| } else |
| tasklet_schedule(&host->finish_tasklet); |
| } |
| |
| static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) |
| { |
| int flags; |
| u32 mask; |
| unsigned long timeout; |
| |
| WARN_ON(host->cmd); |
| |
| /* Wait max 10 ms */ |
| timeout = 10; |
| |
| mask = SDHCI_CMD_INHIBIT; |
| if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY)) |
| mask |= SDHCI_DATA_INHIBIT; |
| |
| /* We shouldn't wait for data inihibit for stop commands, even |
| though they might use busy signaling */ |
| if (host->mrq->data && (cmd == host->mrq->data->stop)) |
| mask &= ~SDHCI_DATA_INHIBIT; |
| |
| while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) { |
| if (timeout == 0) { |
| printk(KERN_ERR "%s: Controller never released " |
| "inhibit bit(s).\n", mmc_hostname(host->mmc)); |
| sdhci_dumpregs(host); |
| cmd->error = -EIO; |
| tasklet_schedule(&host->finish_tasklet); |
| return; |
| } |
| timeout--; |
| mdelay(1); |
| } |
| |
| mod_timer(&host->timer, jiffies + 10 * HZ); |
| |
| host->cmd = cmd; |
| |
| sdhci_prepare_data(host, cmd->data); |
| |
| writel(cmd->arg, host->ioaddr + SDHCI_ARGUMENT); |
| |
| sdhci_set_transfer_mode(host, cmd->data); |
| |
| if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { |
| printk(KERN_ERR "%s: Unsupported response type!\n", |
| mmc_hostname(host->mmc)); |
| cmd->error = -EINVAL; |
| tasklet_schedule(&host->finish_tasklet); |
| return; |
| } |
| |
| if (!(cmd->flags & MMC_RSP_PRESENT)) |
| flags = SDHCI_CMD_RESP_NONE; |
| else if (cmd->flags & MMC_RSP_136) |
| flags = SDHCI_CMD_RESP_LONG; |
| else if (cmd->flags & MMC_RSP_BUSY) |
| flags = SDHCI_CMD_RESP_SHORT_BUSY; |
| else |
| flags = SDHCI_CMD_RESP_SHORT; |
| |
| if (cmd->flags & MMC_RSP_CRC) |
| flags |= SDHCI_CMD_CRC; |
| if (cmd->flags & MMC_RSP_OPCODE) |
| flags |= SDHCI_CMD_INDEX; |
| if (cmd->data) |
| flags |= SDHCI_CMD_DATA; |
| |
| writew(SDHCI_MAKE_CMD(cmd->opcode, flags), |
| host->ioaddr + SDHCI_COMMAND); |
| } |
| |
| static void sdhci_finish_command(struct sdhci_host *host) |
| { |
| int i; |
| |
| BUG_ON(host->cmd == NULL); |
| |
| if (host->cmd->flags & MMC_RSP_PRESENT) { |
| if (host->cmd->flags & MMC_RSP_136) { |
| /* CRC is stripped so we need to do some shifting. */ |
| for (i = 0;i < 4;i++) { |
| host->cmd->resp[i] = readl(host->ioaddr + |
| SDHCI_RESPONSE + (3-i)*4) << 8; |
| if (i != 3) |
| host->cmd->resp[i] |= |
| readb(host->ioaddr + |
| SDHCI_RESPONSE + (3-i)*4-1); |
| } |
| } else { |
| host->cmd->resp[0] = readl(host->ioaddr + SDHCI_RESPONSE); |
| } |
| } |
| |
| host->cmd->error = 0; |
| |
| if (host->data && host->data_early) |
| sdhci_finish_data(host); |
| |
| if (!host->cmd->data) |
| tasklet_schedule(&host->finish_tasklet); |
| |
| host->cmd = NULL; |
| } |
| |
| static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) |
| { |
| int div; |
| u16 clk; |
| unsigned long timeout; |
| |
| if (clock == host->clock) |
| return; |
| |
| writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); |
| |
| if (clock == 0) |
| goto out; |
| |
| for (div = 1;div < 256;div *= 2) { |
| if ((host->max_clk / div) <= clock) |
| break; |
| } |
| div >>= 1; |
| |
| clk = div << SDHCI_DIVIDER_SHIFT; |
| clk |= SDHCI_CLOCK_INT_EN; |
| writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL); |
| |
| /* Wait max 10 ms */ |
| timeout = 10; |
| while (!((clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL)) |
| & SDHCI_CLOCK_INT_STABLE)) { |
| if (timeout == 0) { |
| printk(KERN_ERR "%s: Internal clock never " |
| "stabilised.\n", mmc_hostname(host->mmc)); |
| sdhci_dumpregs(host); |
| return; |
| } |
| timeout--; |
| mdelay(1); |
| } |
| |
| clk |= SDHCI_CLOCK_CARD_EN; |
| writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL); |
| |
| out: |
| host->clock = clock; |
| } |
| |
| static void sdhci_set_power(struct sdhci_host *host, unsigned short power) |
| { |
| u8 pwr; |
| |
| if (host->power == power) |
| return; |
| |
| if (power == (unsigned short)-1) { |
| writeb(0, host->ioaddr + SDHCI_POWER_CONTROL); |
| goto out; |
| } |
| |
| /* |
| * Spec says that we should clear the power reg before setting |
| * a new value. Some controllers don't seem to like this though. |
| */ |
| if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) |
| writeb(0, host->ioaddr + SDHCI_POWER_CONTROL); |
| |
| pwr = SDHCI_POWER_ON; |
| |
| switch (1 << power) { |
| case MMC_VDD_165_195: |
| pwr |= SDHCI_POWER_180; |
| break; |
| case MMC_VDD_29_30: |
| case MMC_VDD_30_31: |
| pwr |= SDHCI_POWER_300; |
| break; |
| case MMC_VDD_32_33: |
| case MMC_VDD_33_34: |
| pwr |= SDHCI_POWER_330; |
| break; |
| default: |
| BUG(); |
| } |
| |
| writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL); |
| |
| out: |
| host->power = power; |
| } |
| |
| /*****************************************************************************\ |
| * * |
| * MMC callbacks * |
| * * |
| \*****************************************************************************/ |
| |
| static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct sdhci_host *host; |
| unsigned long flags; |
| |
| host = mmc_priv(mmc); |
| |
| spin_lock_irqsave(&host->lock, flags); |
| |
| WARN_ON(host->mrq != NULL); |
| |
| sdhci_activate_led(host); |
| |
| host->mrq = mrq; |
| |
| if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) { |
| host->mrq->cmd->error = -ENOMEDIUM; |
| tasklet_schedule(&host->finish_tasklet); |
| } else |
| sdhci_send_command(host, mrq->cmd); |
| |
| mmiowb(); |
| spin_unlock_irqrestore(&host->lock, flags); |
| } |
| |
| static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct sdhci_host *host; |
| unsigned long flags; |
| u8 ctrl; |
| |
| host = mmc_priv(mmc); |
| |
| spin_lock_irqsave(&host->lock, flags); |
| |
| /* |
| * Reset the chip on each power off. |
| * Should clear out any weird states. |
| */ |
| if (ios->power_mode == MMC_POWER_OFF) { |
| writel(0, host->ioaddr + SDHCI_SIGNAL_ENABLE); |
| sdhci_init(host); |
| } |
| |
| sdhci_set_clock(host, ios->clock); |
| |
| if (ios->power_mode == MMC_POWER_OFF) |
| sdhci_set_power(host, -1); |
| else |
| sdhci_set_power(host, ios->vdd); |
| |
| ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); |
| |
| if (ios->bus_width == MMC_BUS_WIDTH_4) |
| ctrl |= SDHCI_CTRL_4BITBUS; |
| else |
| ctrl &= ~SDHCI_CTRL_4BITBUS; |
| |
| if (ios->timing == MMC_TIMING_SD_HS) |
| ctrl |= SDHCI_CTRL_HISPD; |
| else |
| ctrl &= ~SDHCI_CTRL_HISPD; |
| |
| writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); |
| |
| /* |
| * Some (ENE) controllers go apeshit on some ios operation, |
| * signalling timeout and CRC errors even on CMD0. Resetting |
| * it on each ios seems to solve the problem. |
| */ |
| if(host->chip->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS) |
| sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); |
| |
| mmiowb(); |
| spin_unlock_irqrestore(&host->lock, flags); |
| } |
| |
| static int sdhci_get_ro(struct mmc_host *mmc) |
| { |
| struct sdhci_host *host; |
| unsigned long flags; |
| int present; |
| |
| host = mmc_priv(mmc); |
| |
| spin_lock_irqsave(&host->lock, flags); |
| |
| present = readl(host->ioaddr + SDHCI_PRESENT_STATE); |
| |
| spin_unlock_irqrestore(&host->lock, flags); |
| |
| return !(present & SDHCI_WRITE_PROTECT); |
| } |
| |
| static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable) |
| { |
| struct sdhci_host *host; |
| unsigned long flags; |
| u32 ier; |
| |
| host = mmc_priv(mmc); |
| |
| spin_lock_irqsave(&host->lock, flags); |
| |
| ier = readl(host->ioaddr + SDHCI_INT_ENABLE); |
| |
| ier &= ~SDHCI_INT_CARD_INT; |
| if (enable) |
| ier |= SDHCI_INT_CARD_INT; |
| |
| writel(ier, host->ioaddr + SDHCI_INT_ENABLE); |
| writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE); |
| |
| mmiowb(); |
| |
| spin_unlock_irqrestore(&host->lock, flags); |
| } |
| |
| static const struct mmc_host_ops sdhci_ops = { |
| .request = sdhci_request, |
| .set_ios = sdhci_set_ios, |
| .get_ro = sdhci_get_ro, |
| .enable_sdio_irq = sdhci_enable_sdio_irq, |
| }; |
| |
| /*****************************************************************************\ |
| * * |
| * Tasklets * |
| * * |
| \*****************************************************************************/ |
| |
| static void sdhci_tasklet_card(unsigned long param) |
| { |
| struct sdhci_host *host; |
| unsigned long flags; |
| |
| host = (struct sdhci_host*)param; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| |
| if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) { |
| if (host->mrq) { |
| printk(KERN_ERR "%s: Card removed during transfer!\n", |
| mmc_hostname(host->mmc)); |
| printk(KERN_ERR "%s: Resetting controller.\n", |
| mmc_hostname(host->mmc)); |
| |
| sdhci_reset(host, SDHCI_RESET_CMD); |
| sdhci_reset(host, SDHCI_RESET_DATA); |
| |
| host->mrq->cmd->error = -ENOMEDIUM; |
| tasklet_schedule(&host->finish_tasklet); |
| } |
| } |
| |
| spin_unlock_irqrestore(&host->lock, flags); |
| |
| mmc_detect_change(host->mmc, msecs_to_jiffies(500)); |
| } |
| |
| static void sdhci_tasklet_finish(unsigned long param) |
| { |
| struct sdhci_host *host; |
| unsigned long flags; |
| struct mmc_request *mrq; |
| |
| host = (struct sdhci_host*)param; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| |
| del_timer(&host->timer); |
| |
| mrq = host->mrq; |
| |
| /* |
| * The controller needs a reset of internal state machines |
| * upon error conditions. |
| */ |
| if (mrq->cmd->error || |
| (mrq->data && (mrq->data->error || |
| (mrq->data->stop && mrq->data->stop->error)))) { |
| |
| /* Some controllers need this kick or reset won't work here */ |
| if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) { |
| unsigned int clock; |
| |
| /* This is to force an update */ |
| clock = host->clock; |
| host->clock = 0; |
| sdhci_set_clock(host, clock); |
| } |
| |
| /* Spec says we should do both at the same time, but Ricoh |
| controllers do not like that. */ |
| sdhci_reset(host, SDHCI_RESET_CMD); |
| sdhci_reset(host, SDHCI_RESET_DATA); |
| } |
| |
| host->mrq = NULL; |
| host->cmd = NULL; |
| host->data = NULL; |
| |
| sdhci_deactivate_led(host); |
| |
| mmiowb(); |
| spin_unlock_irqrestore(&host->lock, flags); |
| |
| mmc_request_done(host->mmc, mrq); |
| } |
| |
| static void sdhci_timeout_timer(unsigned long data) |
| { |
| struct sdhci_host *host; |
| unsigned long flags; |
| |
| host = (struct sdhci_host*)data; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| |
| if (host->mrq) { |
| printk(KERN_ERR "%s: Timeout waiting for hardware " |
| "interrupt.\n", mmc_hostname(host->mmc)); |
| sdhci_dumpregs(host); |
| |
| if (host->data) { |
| host->data->error = -ETIMEDOUT; |
| sdhci_finish_data(host); |
| } else { |
| if (host->cmd) |
| host->cmd->error = -ETIMEDOUT; |
| else |
| host->mrq->cmd->error = -ETIMEDOUT; |
| |
| tasklet_schedule(&host->finish_tasklet); |
| } |
| } |
| |
| mmiowb(); |
| spin_unlock_irqrestore(&host->lock, flags); |
| } |
| |
| /*****************************************************************************\ |
| * * |
| * Interrupt handling * |
| * * |
| \*****************************************************************************/ |
| |
| static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask) |
| { |
| BUG_ON(intmask == 0); |
| |
| if (!host->cmd) { |
| printk(KERN_ERR "%s: Got command interrupt 0x%08x even " |
| "though no command operation was in progress.\n", |
| mmc_hostname(host->mmc), (unsigned)intmask); |
| sdhci_dumpregs(host); |
| return; |
| } |
| |
| if (intmask & SDHCI_INT_TIMEOUT) |
| host->cmd->error = -ETIMEDOUT; |
| else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT | |
| SDHCI_INT_INDEX)) |
| host->cmd->error = -EILSEQ; |
| |
| if (host->cmd->error) |
| tasklet_schedule(&host->finish_tasklet); |
| else if (intmask & SDHCI_INT_RESPONSE) |
| sdhci_finish_command(host); |
| } |
| |
| static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) |
| { |
| BUG_ON(intmask == 0); |
| |
| if (!host->data) { |
| /* |
| * A data end interrupt is sent together with the response |
| * for the stop command. |
| */ |
| if (intmask & SDHCI_INT_DATA_END) |
| return; |
| |
| printk(KERN_ERR "%s: Got data interrupt 0x%08x even " |
| "though no data operation was in progress.\n", |
| mmc_hostname(host->mmc), (unsigned)intmask); |
| sdhci_dumpregs(host); |
| |
| return; |
| } |
| |
| if (intmask & SDHCI_INT_DATA_TIMEOUT) |
| host->data->error = -ETIMEDOUT; |
| else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT)) |
| host->data->error = -EILSEQ; |
| |
| if (host->data->error) |
| sdhci_finish_data(host); |
| else { |
| if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) |
| sdhci_transfer_pio(host); |
| |
| /* |
| * We currently don't do anything fancy with DMA |
| * boundaries, but as we can't disable the feature |
| * we need to at least restart the transfer. |
| */ |
| if (intmask & SDHCI_INT_DMA_END) |
| writel(readl(host->ioaddr + SDHCI_DMA_ADDRESS), |
| host->ioaddr + SDHCI_DMA_ADDRESS); |
| |
| if (intmask & SDHCI_INT_DATA_END) { |
| if (host->cmd) { |
| /* |
| * Data managed to finish before the |
| * command completed. Make sure we do |
| * things in the proper order. |
| */ |
| host->data_early = 1; |
| } else { |
| sdhci_finish_data(host); |
| } |
| } |
| } |
| } |
| |
| static irqreturn_t sdhci_irq(int irq, void *dev_id) |
| { |
| irqreturn_t result; |
| struct sdhci_host* host = dev_id; |
| u32 intmask; |
| int cardint = 0; |
| |
| spin_lock(&host->lock); |
| |
| intmask = readl(host->ioaddr + SDHCI_INT_STATUS); |
| |
| if (!intmask || intmask == 0xffffffff) { |
| result = IRQ_NONE; |
| goto out; |
| } |
| |
| DBG("*** %s got interrupt: 0x%08x\n", host->slot_descr, intmask); |
| |
| if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) { |
| writel(intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE), |
| host->ioaddr + SDHCI_INT_STATUS); |
| tasklet_schedule(&host->card_tasklet); |
| } |
| |
| intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE); |
| |
| if (intmask & SDHCI_INT_CMD_MASK) { |
| writel(intmask & SDHCI_INT_CMD_MASK, |
| host->ioaddr + SDHCI_INT_STATUS); |
| sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK); |
| } |
| |
| if (intmask & SDHCI_INT_DATA_MASK) { |
| writel(intmask & SDHCI_INT_DATA_MASK, |
| host->ioaddr + SDHCI_INT_STATUS); |
| sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK); |
| } |
| |
| intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK); |
| |
| intmask &= ~SDHCI_INT_ERROR; |
| |
| if (intmask & SDHCI_INT_BUS_POWER) { |
| printk(KERN_ERR "%s: Card is consuming too much power!\n", |
| mmc_hostname(host->mmc)); |
| writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS); |
| } |
| |
| intmask &= ~SDHCI_INT_BUS_POWER; |
| |
| if (intmask & SDHCI_INT_CARD_INT) |
| cardint = 1; |
| |
| intmask &= ~SDHCI_INT_CARD_INT; |
| |
| if (intmask) { |
| printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n", |
| mmc_hostname(host->mmc), intmask); |
| sdhci_dumpregs(host); |
| |
| writel(intmask, host->ioaddr + SDHCI_INT_STATUS); |
| } |
| |
| result = IRQ_HANDLED; |
| |
| mmiowb(); |
| out: |
| spin_unlock(&host->lock); |
| |
| /* |
| * We have to delay this as it calls back into the driver. |
| */ |
| if (cardint) |
| mmc_signal_sdio_irq(host->mmc); |
| |
| return result; |
| } |
| |
| /*****************************************************************************\ |
| * * |
| * Suspend/resume * |
| * * |
| \*****************************************************************************/ |
| |
| #ifdef CONFIG_PM |
| |
| static int sdhci_suspend (struct pci_dev *pdev, pm_message_t state) |
| { |
| struct sdhci_chip *chip; |
| int i, ret; |
| |
| chip = pci_get_drvdata(pdev); |
| if (!chip) |
| return 0; |
| |
| DBG("Suspending...\n"); |
| |
| for (i = 0;i < chip->num_slots;i++) { |
| if (!chip->hosts[i]) |
| continue; |
| ret = mmc_suspend_host(chip->hosts[i]->mmc, state); |
| if (ret) { |
| for (i--;i >= 0;i--) |
| mmc_resume_host(chip->hosts[i]->mmc); |
| return ret; |
| } |
| } |
| |
| pci_save_state(pdev); |
| pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); |
| |
| for (i = 0;i < chip->num_slots;i++) { |
| if (!chip->hosts[i]) |
| continue; |
| free_irq(chip->hosts[i]->irq, chip->hosts[i]); |
| } |
| |
| pci_disable_device(pdev); |
| pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| |
| return 0; |
| } |
| |
| static int sdhci_resume (struct pci_dev *pdev) |
| { |
| struct sdhci_chip *chip; |
| int i, ret; |
| |
| chip = pci_get_drvdata(pdev); |
| if (!chip) |
| return 0; |
| |
| DBG("Resuming...\n"); |
| |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| ret = pci_enable_device(pdev); |
| if (ret) |
| return ret; |
| |
| for (i = 0;i < chip->num_slots;i++) { |
| if (!chip->hosts[i]) |
| continue; |
| if (chip->hosts[i]->flags & SDHCI_USE_DMA) |
| pci_set_master(pdev); |
| ret = request_irq(chip->hosts[i]->irq, sdhci_irq, |
| IRQF_SHARED, chip->hosts[i]->slot_descr, |
| chip->hosts[i]); |
| if (ret) |
| return ret; |
| sdhci_init(chip->hosts[i]); |
| mmiowb(); |
| ret = mmc_resume_host(chip->hosts[i]->mmc); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| #else /* CONFIG_PM */ |
| |
| #define sdhci_suspend NULL |
| #define sdhci_resume NULL |
| |
| #endif /* CONFIG_PM */ |
| |
| /*****************************************************************************\ |
| * * |
| * Device probing/removal * |
| * * |
| \*****************************************************************************/ |
| |
| static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) |
| { |
| int ret; |
| unsigned int version; |
| struct sdhci_chip *chip; |
| struct mmc_host *mmc; |
| struct sdhci_host *host; |
| |
| u8 first_bar; |
| unsigned int caps; |
| |
| chip = pci_get_drvdata(pdev); |
| BUG_ON(!chip); |
| |
| ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &first_bar); |
| if (ret) |
| return ret; |
| |
| first_bar &= PCI_SLOT_INFO_FIRST_BAR_MASK; |
| |
| if (first_bar > 5) { |
| printk(KERN_ERR DRIVER_NAME ": Invalid first BAR. Aborting.\n"); |
| return -ENODEV; |
| } |
| |
| if (!(pci_resource_flags(pdev, first_bar + slot) & IORESOURCE_MEM)) { |
| printk(KERN_ERR DRIVER_NAME ": BAR is not iomem. Aborting.\n"); |
| return -ENODEV; |
| } |
| |
| if (pci_resource_len(pdev, first_bar + slot) != 0x100) { |
| printk(KERN_ERR DRIVER_NAME ": Invalid iomem size. " |
| "You may experience problems.\n"); |
| } |
| |
| if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) { |
| printk(KERN_ERR DRIVER_NAME ": Vendor specific interface. Aborting.\n"); |
| return -ENODEV; |
| } |
| |
| if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) { |
| printk(KERN_ERR DRIVER_NAME ": Unknown interface. Aborting.\n"); |
| return -ENODEV; |
| } |
| |
| mmc = mmc_alloc_host(sizeof(struct sdhci_host), &pdev->dev); |
| if (!mmc) |
| return -ENOMEM; |
| |
| host = mmc_priv(mmc); |
| host->mmc = mmc; |
| |
| host->chip = chip; |
| chip->hosts[slot] = host; |
| |
| host->bar = first_bar + slot; |
| |
| host->addr = pci_resource_start(pdev, host->bar); |
| host->irq = pdev->irq; |
| |
| DBG("slot %d at 0x%08lx, irq %d\n", slot, host->addr, host->irq); |
| |
| snprintf(host->slot_descr, 20, "sdhci:slot%d", slot); |
| |
| ret = pci_request_region(pdev, host->bar, host->slot_descr); |
| if (ret) |
| goto free; |
| |
| host->ioaddr = ioremap_nocache(host->addr, |
| pci_resource_len(pdev, host->bar)); |
| if (!host->ioaddr) { |
| ret = -ENOMEM; |
| goto release; |
| } |
| |
| sdhci_reset(host, SDHCI_RESET_ALL); |
| |
| version = readw(host->ioaddr + SDHCI_HOST_VERSION); |
| version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT; |
| if (version != 0) { |
| printk(KERN_ERR "%s: Unknown controller version (%d). " |
| "You may experience problems.\n", host->slot_descr, |
| version); |
| } |
| |
| caps = readl(host->ioaddr + SDHCI_CAPABILITIES); |
| |
| if (chip->quirks & SDHCI_QUIRK_FORCE_DMA) |
| host->flags |= SDHCI_USE_DMA; |
| else if (!(caps & SDHCI_CAN_DO_DMA)) |
| DBG("Controller doesn't have DMA capability\n"); |
| else |
| host->flags |= SDHCI_USE_DMA; |
| |
| if ((chip->quirks & SDHCI_QUIRK_BROKEN_DMA) && |
| (host->flags & SDHCI_USE_DMA)) { |
| DBG("Disabling DMA as it is marked broken"); |
| host->flags &= ~SDHCI_USE_DMA; |
| } |
| |
| if (((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) && |
| (host->flags & SDHCI_USE_DMA)) { |
| printk(KERN_WARNING "%s: Will use DMA " |
| "mode even though HW doesn't fully " |
| "claim to support it.\n", host->slot_descr); |
| } |
| |
| if (host->flags & SDHCI_USE_DMA) { |
| if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { |
| printk(KERN_WARNING "%s: No suitable DMA available. " |
| "Falling back to PIO.\n", host->slot_descr); |
| host->flags &= ~SDHCI_USE_DMA; |
| } |
| } |
| |
| if (host->flags & SDHCI_USE_DMA) |
| pci_set_master(pdev); |
| else /* XXX: Hack to get MMC layer to avoid highmem */ |
| pdev->dma_mask = 0; |
| |
| host->max_clk = |
| (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; |
| if (host->max_clk == 0) { |
| printk(KERN_ERR "%s: Hardware doesn't specify base clock " |
| "frequency.\n", host->slot_descr); |
| ret = -ENODEV; |
| goto unmap; |
| } |
| host->max_clk *= 1000000; |
| |
| host->timeout_clk = |
| (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT; |
| if (host->timeout_clk == 0) { |
| printk(KERN_ERR "%s: Hardware doesn't specify timeout clock " |
| "frequency.\n", host->slot_descr); |
| ret = -ENODEV; |
| goto unmap; |
| } |
| if (caps & SDHCI_TIMEOUT_CLK_UNIT) |
| host->timeout_clk *= 1000; |
| |
| /* |
| * Set host parameters. |
| */ |
| mmc->ops = &sdhci_ops; |
| mmc->f_min = host->max_clk / 256; |
| mmc->f_max = host->max_clk; |
| mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_SDIO_IRQ; |
| |
| if (caps & SDHCI_CAN_DO_HISPD) |
| mmc->caps |= MMC_CAP_SD_HIGHSPEED; |
| |
| mmc->ocr_avail = 0; |
| if (caps & SDHCI_CAN_VDD_330) |
| mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34; |
| if (caps & SDHCI_CAN_VDD_300) |
| mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31; |
| if (caps & SDHCI_CAN_VDD_180) |
| mmc->ocr_avail |= MMC_VDD_165_195; |
| |
| if (mmc->ocr_avail == 0) { |
| printk(KERN_ERR "%s: Hardware doesn't report any " |
| "support voltages.\n", host->slot_descr); |
| ret = -ENODEV; |
| goto unmap; |
| } |
| |
| spin_lock_init(&host->lock); |
| |
| /* |
| * Maximum number of segments. Hardware cannot do scatter lists. |
| */ |
| if (host->flags & SDHCI_USE_DMA) |
| mmc->max_hw_segs = 1; |
| else |
| mmc->max_hw_segs = 16; |
| mmc->max_phys_segs = 16; |
| |
| /* |
| * Maximum number of sectors in one transfer. Limited by DMA boundary |
| * size (512KiB). |
| */ |
| mmc->max_req_size = 524288; |
| |
| /* |
| * Maximum segment size. Could be one segment with the maximum number |
| * of bytes. |
| */ |
| mmc->max_seg_size = mmc->max_req_size; |
| |
| /* |
| * Maximum block size. This varies from controller to controller and |
| * is specified in the capabilities register. |
| */ |
| mmc->max_blk_size = (caps & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT; |
| if (mmc->max_blk_size >= 3) { |
| printk(KERN_WARNING "%s: Invalid maximum block size, assuming 512\n", |
| host->slot_descr); |
| mmc->max_blk_size = 512; |
| } else |
| mmc->max_blk_size = 512 << mmc->max_blk_size; |
| |
| /* |
| * Maximum block count. |
| */ |
| mmc->max_blk_count = 65535; |
| |
| /* |
| * Init tasklets. |
| */ |
| tasklet_init(&host->card_tasklet, |
| sdhci_tasklet_card, (unsigned long)host); |
| tasklet_init(&host->finish_tasklet, |
| sdhci_tasklet_finish, (unsigned long)host); |
| |
| setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host); |
| |
| ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED, |
| host->slot_descr, host); |
| if (ret) |
| goto untasklet; |
| |
| sdhci_init(host); |
| |
| #ifdef CONFIG_MMC_DEBUG |
| sdhci_dumpregs(host); |
| #endif |
| |
| mmiowb(); |
| |
| mmc_add_host(mmc); |
| |
| printk(KERN_INFO "%s: SDHCI at 0x%08lx irq %d %s\n", mmc_hostname(mmc), |
| host->addr, host->irq, |
| (host->flags & SDHCI_USE_DMA)?"DMA":"PIO"); |
| |
| return 0; |
| |
| untasklet: |
| tasklet_kill(&host->card_tasklet); |
| tasklet_kill(&host->finish_tasklet); |
| unmap: |
| iounmap(host->ioaddr); |
| release: |
| pci_release_region(pdev, host->bar); |
| free: |
| mmc_free_host(mmc); |
| |
| return ret; |
| } |
| |
| static void sdhci_remove_slot(struct pci_dev *pdev, int slot) |
| { |
| struct sdhci_chip *chip; |
| struct mmc_host *mmc; |
| struct sdhci_host *host; |
| |
| chip = pci_get_drvdata(pdev); |
| host = chip->hosts[slot]; |
| mmc = host->mmc; |
| |
| chip->hosts[slot] = NULL; |
| |
| mmc_remove_host(mmc); |
| |
| sdhci_reset(host, SDHCI_RESET_ALL); |
| |
| free_irq(host->irq, host); |
| |
| del_timer_sync(&host->timer); |
| |
| tasklet_kill(&host->card_tasklet); |
| tasklet_kill(&host->finish_tasklet); |
| |
| iounmap(host->ioaddr); |
| |
| pci_release_region(pdev, host->bar); |
| |
| mmc_free_host(mmc); |
| } |
| |
| static int __devinit sdhci_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| int ret, i; |
| u8 slots, rev; |
| struct sdhci_chip *chip; |
| |
| BUG_ON(pdev == NULL); |
| BUG_ON(ent == NULL); |
| |
| pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev); |
| |
| printk(KERN_INFO DRIVER_NAME |
| ": SDHCI controller found at %s [%04x:%04x] (rev %x)\n", |
| pci_name(pdev), (int)pdev->vendor, (int)pdev->device, |
| (int)rev); |
| |
| ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots); |
| if (ret) |
| return ret; |
| |
| slots = PCI_SLOT_INFO_SLOTS(slots) + 1; |
| DBG("found %d slot(s)\n", slots); |
| if (slots == 0) |
| return -ENODEV; |
| |
| ret = pci_enable_device(pdev); |
| if (ret) |
| return ret; |
| |
| chip = kzalloc(sizeof(struct sdhci_chip) + |
| sizeof(struct sdhci_host*) * slots, GFP_KERNEL); |
| if (!chip) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| chip->pdev = pdev; |
| chip->quirks = ent->driver_data; |
| |
| if (debug_quirks) |
| chip->quirks = debug_quirks; |
| |
| chip->num_slots = slots; |
| pci_set_drvdata(pdev, chip); |
| |
| for (i = 0;i < slots;i++) { |
| ret = sdhci_probe_slot(pdev, i); |
| if (ret) { |
| for (i--;i >= 0;i--) |
| sdhci_remove_slot(pdev, i); |
| goto free; |
| } |
| } |
| |
| return 0; |
| |
| free: |
| pci_set_drvdata(pdev, NULL); |
| kfree(chip); |
| |
| err: |
| pci_disable_device(pdev); |
| return ret; |
| } |
| |
| static void __devexit sdhci_remove(struct pci_dev *pdev) |
| { |
| int i; |
| struct sdhci_chip *chip; |
| |
| chip = pci_get_drvdata(pdev); |
| |
| if (chip) { |
| for (i = 0;i < chip->num_slots;i++) |
| sdhci_remove_slot(pdev, i); |
| |
| pci_set_drvdata(pdev, NULL); |
| |
| kfree(chip); |
| } |
| |
| pci_disable_device(pdev); |
| } |
| |
| static struct pci_driver sdhci_driver = { |
| .name = DRIVER_NAME, |
| .id_table = pci_ids, |
| .probe = sdhci_probe, |
| .remove = __devexit_p(sdhci_remove), |
| .suspend = sdhci_suspend, |
| .resume = sdhci_resume, |
| }; |
| |
| /*****************************************************************************\ |
| * * |
| * Driver init/exit * |
| * * |
| \*****************************************************************************/ |
| |
| static int __init sdhci_drv_init(void) |
| { |
| printk(KERN_INFO DRIVER_NAME |
| ": Secure Digital Host Controller Interface driver\n"); |
| printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); |
| |
| return pci_register_driver(&sdhci_driver); |
| } |
| |
| static void __exit sdhci_drv_exit(void) |
| { |
| DBG("Exiting\n"); |
| |
| pci_unregister_driver(&sdhci_driver); |
| } |
| |
| module_init(sdhci_drv_init); |
| module_exit(sdhci_drv_exit); |
| |
| module_param(debug_quirks, uint, 0444); |
| |
| MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>"); |
| MODULE_DESCRIPTION("Secure Digital Host Controller Interface driver"); |
| MODULE_LICENSE("GPL"); |
| |
| MODULE_PARM_DESC(debug_quirks, "Force certain quirks."); |