diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 91b00a5..0816c5d 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -357,11 +357,11 @@
  * Asynchronous forces are implemented by setting the WANT_SYNC
  * bit in the appropriate in-core log and then returning.
  *
- * Synchronous forces are implemented with a semaphore.  All callers
- * to force a given lsn to disk will wait on a semaphore attached to the
+ * Synchronous forces are implemented with a signal variable. All callers
+ * to force a given lsn to disk will wait on a the sv attached to the
  * specific in-core log.  When given in-core log finally completes its
  * write to disk, that thread will wake up all threads waiting on the
- * semaphore.
+ * sv.
  */
 int
 _xfs_log_force(
@@ -707,7 +707,7 @@
 		if (!(iclog->ic_state == XLOG_STATE_ACTIVE ||
 		      iclog->ic_state == XLOG_STATE_DIRTY)) {
 			if (!XLOG_FORCED_SHUTDOWN(log)) {
-				sv_wait(&iclog->ic_forcesema, PMEM,
+				sv_wait(&iclog->ic_force_wait, PMEM,
 					&log->l_icloglock, s);
 			} else {
 				spin_unlock(&log->l_icloglock);
@@ -748,7 +748,7 @@
 			|| iclog->ic_state == XLOG_STATE_DIRTY
 			|| iclog->ic_state == XLOG_STATE_IOERROR) ) {
 
-				sv_wait(&iclog->ic_forcesema, PMEM,
+				sv_wait(&iclog->ic_force_wait, PMEM,
 					&log->l_icloglock, s);
 		} else {
 			spin_unlock(&log->l_icloglock);
@@ -838,7 +838,7 @@
 				break;
 			tail_lsn = 0;
 			free_bytes -= tic->t_unit_res;
-			sv_signal(&tic->t_sema);
+			sv_signal(&tic->t_wait);
 			tic = tic->t_next;
 		} while (tic != log->l_write_headq);
 	}
@@ -859,7 +859,7 @@
 				break;
 			tail_lsn = 0;
 			free_bytes -= need_bytes;
-			sv_signal(&tic->t_sema);
+			sv_signal(&tic->t_wait);
 			tic = tic->t_next;
 		} while (tic != log->l_reserve_headq);
 	}
@@ -1285,8 +1285,8 @@
 
 		ASSERT(XFS_BUF_ISBUSY(iclog->ic_bp));
 		ASSERT(XFS_BUF_VALUSEMA(iclog->ic_bp) <= 0);
-		sv_init(&iclog->ic_forcesema, SV_DEFAULT, "iclog-force");
-		sv_init(&iclog->ic_writesema, SV_DEFAULT, "iclog-write");
+		sv_init(&iclog->ic_force_wait, SV_DEFAULT, "iclog-force");
+		sv_init(&iclog->ic_write_wait, SV_DEFAULT, "iclog-write");
 
 		iclogp = &iclog->ic_next;
 	}
@@ -1565,8 +1565,8 @@
 
 	iclog = log->l_iclog;
 	for (i=0; i<log->l_iclog_bufs; i++) {
-		sv_destroy(&iclog->ic_forcesema);
-		sv_destroy(&iclog->ic_writesema);
+		sv_destroy(&iclog->ic_force_wait);
+		sv_destroy(&iclog->ic_write_wait);
 		xfs_buf_free(iclog->ic_bp);
 #ifdef XFS_LOG_TRACE
 		if (iclog->ic_trace != NULL) {
@@ -1976,7 +1976,7 @@
 /* Clean iclogs starting from the head.  This ordering must be
  * maintained, so an iclog doesn't become ACTIVE beyond one that
  * is SYNCING.  This is also required to maintain the notion that we use
- * a counting semaphore to hold off would be writers to the log when every
+ * a ordered wait queue to hold off would be writers to the log when every
  * iclog is trying to sync to disk.
  *
  * State Change: DIRTY -> ACTIVE
@@ -2240,7 +2240,7 @@
 			xlog_state_clean_log(log);
 
 			/* wake up threads waiting in xfs_log_force() */
-			sv_broadcast(&iclog->ic_forcesema);
+			sv_broadcast(&iclog->ic_force_wait);
 
 			iclog = iclog->ic_next;
 		} while (first_iclog != iclog);
@@ -2302,8 +2302,7 @@
  * the second completion goes through.
  *
  * Callbacks could take time, so they are done outside the scope of the
- * global state machine log lock.  Assume that the calls to cvsema won't
- * take a long time.  At least we know it won't sleep.
+ * global state machine log lock.
  */
 STATIC void
 xlog_state_done_syncing(
@@ -2339,7 +2338,7 @@
 	 * iclog buffer, we wake them all, one will get to do the
 	 * I/O, the others get to wait for the result.
 	 */
-	sv_broadcast(&iclog->ic_writesema);
+	sv_broadcast(&iclog->ic_write_wait);
 	spin_unlock(&log->l_icloglock);
 	xlog_state_do_callback(log, aborted, iclog);	/* also cleans log */
 }	/* xlog_state_done_syncing */
@@ -2347,11 +2346,9 @@
 
 /*
  * If the head of the in-core log ring is not (ACTIVE or DIRTY), then we must
- * sleep.  The flush semaphore is set to the number of in-core buffers and
- * decremented around disk syncing.  Therefore, if all buffers are syncing,
- * this semaphore will cause new writes to sleep until a sync completes.
- * Otherwise, this code just does p() followed by v().  This approximates
- * a sleep/wakeup except we can't race.
+ * sleep.  We wait on the flush queue on the head iclog as that should be
+ * the first iclog to complete flushing. Hence if all iclogs are syncing,
+ * we will wait here and all new writes will sleep until a sync completes.
  *
  * The in-core logs are used in a circular fashion. They are not used
  * out-of-order even when an iclog past the head is free.
@@ -2508,7 +2505,7 @@
 			goto error_return;
 
 		XFS_STATS_INC(xs_sleep_logspace);
-		sv_wait(&tic->t_sema, PINOD|PLTWAIT, &log->l_grant_lock, s);
+		sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
 		/*
 		 * If we got an error, and the filesystem is shutting down,
 		 * we'll catch it down below. So just continue...
@@ -2534,7 +2531,7 @@
 		xlog_trace_loggrant(log, tic,
 				    "xlog_grant_log_space: sleep 2");
 		XFS_STATS_INC(xs_sleep_logspace);
-		sv_wait(&tic->t_sema, PINOD|PLTWAIT, &log->l_grant_lock, s);
+		sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
 
 		if (XLOG_FORCED_SHUTDOWN(log)) {
 			spin_lock(&log->l_grant_lock);
@@ -2633,7 +2630,7 @@
 			if (free_bytes < ntic->t_unit_res)
 				break;
 			free_bytes -= ntic->t_unit_res;
-			sv_signal(&ntic->t_sema);
+			sv_signal(&ntic->t_wait);
 			ntic = ntic->t_next;
 		} while (ntic != log->l_write_headq);
 
@@ -2644,7 +2641,7 @@
 			xlog_trace_loggrant(log, tic,
 				    "xlog_regrant_write_log_space: sleep 1");
 			XFS_STATS_INC(xs_sleep_logspace);
-			sv_wait(&tic->t_sema, PINOD|PLTWAIT,
+			sv_wait(&tic->t_wait, PINOD|PLTWAIT,
 				&log->l_grant_lock, s);
 
 			/* If we're shutting down, this tic is already
@@ -2673,7 +2670,7 @@
 		if ((tic->t_flags & XLOG_TIC_IN_Q) == 0)
 			xlog_ins_ticketq(&log->l_write_headq, tic);
 		XFS_STATS_INC(xs_sleep_logspace);
-		sv_wait(&tic->t_sema, PINOD|PLTWAIT, &log->l_grant_lock, s);
+		sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
 
 		/* If we're shutting down, this tic is already off the queue */
 		if (XLOG_FORCED_SHUTDOWN(log)) {
@@ -2916,7 +2913,7 @@
  *	2. the current iclog is drity, and the previous iclog is in the
  *		active or dirty state.
  *
- * We may sleep (call psema) if:
+ * We may sleep if:
  *
  *	1. the current iclog is not in the active nor dirty state.
  *	2. the current iclog dirty, and the previous iclog is not in the
@@ -3013,7 +3010,7 @@
 			return XFS_ERROR(EIO);
 		}
 		XFS_STATS_INC(xs_log_force_sleep);
-		sv_wait(&iclog->ic_forcesema, PINOD, &log->l_icloglock, s);
+		sv_wait(&iclog->ic_force_wait, PINOD, &log->l_icloglock, s);
 		/*
 		 * No need to grab the log lock here since we're
 		 * only deciding whether or not to return EIO
@@ -3096,7 +3093,7 @@
 						 XLOG_STATE_SYNCING))) {
 			ASSERT(!(iclog->ic_state & XLOG_STATE_IOERROR));
 			XFS_STATS_INC(xs_log_force_sleep);
-			sv_wait(&iclog->ic_prev->ic_writesema, PSWP,
+			sv_wait(&iclog->ic_prev->ic_write_wait, PSWP,
 				&log->l_icloglock, s);
 			*log_flushed = 1;
 			already_slept = 1;
@@ -3116,7 +3113,7 @@
 	    !(iclog->ic_state & (XLOG_STATE_ACTIVE | XLOG_STATE_DIRTY))) {
 
 		/*
-		 * Don't wait on the forcesema if we know that we've
+		 * Don't wait on completion if we know that we've
 		 * gotten a log write error.
 		 */
 		if (iclog->ic_state & XLOG_STATE_IOERROR) {
@@ -3124,7 +3121,7 @@
 			return XFS_ERROR(EIO);
 		}
 		XFS_STATS_INC(xs_log_force_sleep);
-		sv_wait(&iclog->ic_forcesema, PSWP, &log->l_icloglock, s);
+		sv_wait(&iclog->ic_force_wait, PSWP, &log->l_icloglock, s);
 		/*
 		 * No need to grab the log lock here since we're
 		 * only deciding whether or not to return EIO
@@ -3180,7 +3177,7 @@
 xlog_ticket_put(xlog_t		*log,
 		xlog_ticket_t	*ticket)
 {
-	sv_destroy(&ticket->t_sema);
+	sv_destroy(&ticket->t_wait);
 	kmem_zone_free(xfs_log_ticket_zone, ticket);
 }	/* xlog_ticket_put */
 
@@ -3270,7 +3267,7 @@
 	tic->t_trans_type	= 0;
 	if (xflags & XFS_LOG_PERM_RESERV)
 		tic->t_flags |= XLOG_TIC_PERM_RESERV;
-	sv_init(&(tic->t_sema), SV_DEFAULT, "logtick");
+	sv_init(&(tic->t_wait), SV_DEFAULT, "logtick");
 
 	xlog_tic_reset_res(tic);
 
@@ -3557,14 +3554,14 @@
 	 */
 	if ((tic = log->l_reserve_headq)) {
 		do {
-			sv_signal(&tic->t_sema);
+			sv_signal(&tic->t_wait);
 			tic = tic->t_next;
 		} while (tic != log->l_reserve_headq);
 	}
 
 	if ((tic = log->l_write_headq)) {
 		do {
-			sv_signal(&tic->t_sema);
+			sv_signal(&tic->t_wait);
 			tic = tic->t_next;
 		} while (tic != log->l_write_headq);
 	}