| /* Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /include/ "msm8226-camera-sensor-qrd.dtsi" |
| |
| &soc { |
| serial@f991f000 { |
| status = "ok"; |
| }; |
| |
| i2c@f9927000 { /* BLSP1 QUP5 */ |
| synaptics@20 { |
| compatible = "synaptics,rmi4"; |
| reg = <0x20>; |
| interrupt-parent = <&msmgpio>; |
| interrupts = <17 0x2008>; |
| vdd-supply = <&pm8226_l19>; |
| vcc_i2c-supply = <&pm8226_lvs1>; |
| synaptics,reset-gpio = <&msmgpio 16 0x00>; |
| synaptics,irq-gpio = <&msmgpio 17 0x2008>; |
| synaptics,button-map = <139 102 158>; |
| synaptics,fw-image-name = "PR1468813.img"; |
| synaptics,i2c-pull-up; |
| synaptics,power-down; |
| synaptics,disable-gpios; |
| }; |
| |
| focaltech@38 { |
| compatible = "focaltech,5x06"; |
| reg = <0x38>; |
| interrupt-parent = <&msmgpio>; |
| interrupts = <17 0x2>; |
| vdd-supply = <&pm8226_l19>; |
| vcc_i2c-supply = <&pm8226_lvs1>; |
| focaltech,name = "ft5x06"; |
| focaltech,family-id = <0x55>; |
| focaltech,reset-gpio = <&msmgpio 16 0x00>; |
| focaltech,irq-gpio = <&msmgpio 17 0x00>; |
| focaltech,display-coords = <0 0 1080 1920>; |
| focaltech,panel-coords = <0 0 1080 2000>; |
| focaltech,button-map= <139 102 158>; |
| focaltech,no-force-update; |
| focaltech,i2c-pull-up; |
| focaltech,group-id = <1>; |
| focaltech,hard-reset-delay-ms = <20>; |
| focaltech,soft-reset-delay-ms = <150>; |
| focaltech,num-max-touches = <5>; |
| focaltech,fw-name = "ft_8226_qrd_1080p_fw.bin"; |
| focaltech,fw-delay-aa-ms = <50>; |
| focaltech,fw-delay-55-ms = <30>; |
| focaltech,fw-upgrade-id1 = <0x79>; |
| focaltech,fw-upgrade-id2 = <0x03>; |
| focaltech,fw-delay-readid-ms = <10>; |
| focaltech,fw-delay-era-flsh-ms = <2000>; |
| }; |
| }; |
| |
| gen-vkeys { |
| compatible = "qcom,gen-vkeys"; |
| label = "ft5x06_ts"; |
| qcom,disp-maxx = <1080>; |
| qcom,disp-maxy = <1920>; |
| qcom,panel-maxx = <1080>; |
| qcom,panel-maxy = <2080>; |
| qcom,key-codes = <139 102 158>; |
| qcom,y-offset = <0>; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| input-name = "gpio-keys"; |
| |
| camera_focus { |
| label = "camera_focus"; |
| gpios = <&msmgpio 108 0x1>; |
| linux,input-type = <1>; |
| linux,code = <0x210>; |
| gpio-key,wakeup; |
| debounce-interval = <15>; |
| }; |
| |
| camera_snapshot { |
| label = "camera_snapshot"; |
| gpios = <&msmgpio 107 0x1>; |
| linux,input-type = <1>; |
| linux,code = <0x2fe>; |
| gpio-key,wakeup; |
| debounce-interval = <15>; |
| }; |
| |
| vol_up { |
| label = "volume_up"; |
| gpios = <&msmgpio 106 0x1>; |
| linux,input-type = <1>; |
| linux,code = <115>; |
| gpio-key,wakeup; |
| debounce-interval = <15>; |
| }; |
| }; |
| |
| spi@f9923000 { |
| ethernet-switch@3 { |
| compatible = "micrel,ks8851"; |
| reg = <3>; |
| interrupt-parent = <&msmgpio>; |
| interrupts = <115 0x8>; |
| spi-max-frequency = <4800000>; |
| rst-gpio = <&msmgpio 114 0>; |
| vdd-io-supply = <&pm8226_lvs1>; |
| vdd-phy-supply = <&pm8226_lvs1>; |
| }; |
| }; |
| |
| sound { |
| qcom,audio-routing = |
| "RX_BIAS", "MCLK", |
| "LDO_H", "MCLK", |
| "SPK_OUT", "MCLK", |
| "SPK_OUT", "EXT_VDD_SPKR", |
| "AMIC1", "MIC BIAS1 External", |
| "MIC BIAS1 External", "Handset Mic", |
| "AMIC2", "MIC BIAS2 External", |
| "MIC BIAS2 External", "Headset Mic", |
| "AMIC3", "MIC BIAS1 External", |
| "MIC BIAS1 External", "Analog Mic3", |
| "AMIC4", "MIC BIAS3 External", |
| "MIC BIAS3 External", "Analog Mic4"; |
| |
| qcom,cdc-mclk-gpios = <&pm8226_gpios 1 0>; |
| qcom,cdc-vdd-spkr-gpios = <&pm8226_gpios 2 0>; |
| qcom,cdc-us-euro-gpios = <&msmgpio 69 0>; |
| }; |
| |
| sound-9302 { |
| qcom,audio-routing = |
| "RX_BIAS", "MCLK", |
| "LDO_H", "MCLK", |
| "SPK_OUT", "MCLK", |
| "SPK_OUT", "EXT_VDD_SPKR", |
| "AMIC1", "MIC BIAS1 External", |
| "MIC BIAS1 External", "Handset Mic", |
| "AMIC2", "MIC BIAS2 External", |
| "MIC BIAS2 External", "Headset Mic", |
| "AMIC3", "MIC BIAS1 External", |
| "MIC BIAS1 External", "Handset Mic"; |
| |
| qcom,cdc-mclk-gpios = <&pm8226_gpios 1 0>; |
| qcom,cdc-vdd-spkr-gpios = <&pm8226_gpios 2 0>; |
| qcom,cdc-us-euro-gpios = <&msmgpio 69 0>; |
| }; |
| }; |
| |
| &sdcc1 { |
| vdd-supply = <&pm8226_l17>; |
| qcom,vdd-voltage-level = <2950000 2950000>; |
| qcom,vdd-current-level = <800 500000>; |
| |
| vdd-io-supply = <&pm8226_l6>; |
| qcom,vdd-io-always-on; |
| qcom,vdd-io-voltage-level = <1800000 1800000>; |
| qcom,vdd-io-current-level = <250 154000>; |
| |
| qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */ |
| qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ |
| |
| qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>; |
| qcom,sup-voltages = <2950 2950>; |
| |
| qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v"; |
| qcom,nonremovable; |
| |
| status = "disabled"; |
| }; |
| |
| &sdhc_1 { |
| vdd-supply = <&pm8226_l17>; |
| qcom,vdd-voltage-level = <2950000 2950000>; |
| qcom,vdd-current-level = <800 500000>; |
| |
| vdd-io-supply = <&pm8226_l6>; |
| qcom,vdd-io-always-on; |
| qcom,vdd-io-voltage-level = <1800000 1800000>; |
| qcom,vdd-io-current-level = <250 154000>; |
| |
| qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */ |
| qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ |
| |
| qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>; |
| qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v"; |
| qcom,nonremovable; |
| |
| status = "ok"; |
| }; |
| |
| &sdcc2 { |
| vdd-supply = <&pm8226_l18>; |
| qcom,vdd-voltage-level = <2950000 2950000>; |
| qcom,vdd-current-level = <9000 400000>; |
| |
| vdd-io-supply = <&pm8226_l21>; |
| qcom,vdd-io-voltage-level = <1800000 2950000>; |
| qcom,vdd-io-current-level = <6 22000>; |
| |
| qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */ |
| qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ |
| |
| qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>; |
| qcom,sup-voltages = <2950 2950>; |
| |
| qcom,xpc; |
| qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; |
| qcom,current-limit = <400>; |
| |
| #address-cells = <0>; |
| interrupt-parent = <&sdcc2>; |
| interrupts = <0 1 2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0xffffffff>; |
| interrupt-map = <0 &intc 0 125 0 |
| 1 &intc 0 220 0 |
| 2 &msmgpio 38 0x3>; |
| interrupt-names = "core_irq", "bam_irq", "status_irq"; |
| cd-gpios = <&msmgpio 38 0x1>; |
| |
| status = "disabled"; |
| }; |
| |
| &sdhc_2 { |
| vdd-supply = <&pm8226_l18>; |
| qcom,vdd-voltage-level = <2950000 2950000>; |
| qcom,vdd-current-level = <9000 400000>; |
| |
| vdd-io-supply = <&pm8226_l21>; |
| qcom,vdd-io-voltage-level = <1800000 2950000>; |
| qcom,vdd-io-current-level = <6 22000>; |
| |
| qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */ |
| qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */ |
| qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */ |
| |
| qcom,clk-rates = <400000 25000000 50000000>; |
| |
| #address-cells = <0>; |
| interrupt-parent = <&sdhc_2>; |
| interrupts = <0 1 2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0xffffffff>; |
| interrupt-map = <0 &intc 0 125 0 |
| 1 &intc 0 221 0 |
| 2 &msmgpio 38 0x3>; |
| interrupt-names = "hc_irq", "pwr_irq", "status_irq"; |
| cd-gpios = <&msmgpio 38 0x1>; |
| |
| status = "ok"; |
| }; |
| |
| &spmi_bus { |
| qcom,pm8226@0 { |
| qcom,leds@a100 { |
| status = "okay"; |
| qcom,led_mpp_2 { |
| label = "mpp"; |
| linux,name = "button-backlight"; |
| linux,default-trigger = "none"; |
| qcom,default-state = "off"; |
| qcom,max-current = <40>; |
| qcom,current-setting = <5>; |
| qcom,id = <6>; |
| qcom,mode = "manual"; |
| qcom,source-sel = <1>; |
| qcom,mode-ctrl = <0x60>; |
| }; |
| }; |
| |
| qcom,leds@a300 { |
| status = "okay"; |
| qcom,led_mpp_4 { |
| label = "mpp"; |
| linux,name = "green"; |
| linux,default-trigger = "battery-full"; |
| qcom,default-state = "off"; |
| qcom,max-current = <40>; |
| qcom,current-setting = <5>; |
| qcom,id = <6>; |
| qcom,mode = "pwm"; |
| qcom,pwm-us = <1000>; |
| qcom,source-sel = <8>; |
| qcom,mode-ctrl = <0x60>; |
| qcom,pwm-channel = <0>; |
| qcom,start-idx = <1>; |
| qcom,ramp-step-ms = <120>; |
| qcom,duty-pcts = [00 00 00 00 00 |
| 00 00 00 00 00 |
| 50 00 00 00 00 |
| 00 00 00 00 00 |
| 00]; |
| qcom,use-blink; |
| }; |
| }; |
| |
| qcom,leds@a500 { |
| status = "okay"; |
| qcom,led_mpp_6 { |
| label = "mpp"; |
| linux,name = "red"; |
| linux,default-trigger = "battery-charging"; |
| qcom,default-state = "off"; |
| qcom,max-current = <40>; |
| qcom,current-setting = <5>; |
| qcom,id = <6>; |
| qcom,mode = "pwm"; |
| qcom,pwm-us = <1000>; |
| qcom,mode-ctrl = <0x60>; |
| qcom,source-sel = <10>; |
| qcom,pwm-channel = <5>; |
| qcom,start-idx = <1>; |
| qcom,ramp-step-ms = <120>; |
| qcom,duty-pcts = [00 00 00 00 00 |
| 00 00 00 00 00 |
| 50 00 00 00 00 |
| 00 00 00 00 00 |
| 00]; |
| qcom,use-blink; |
| }; |
| }; |
| }; |
| |
| qcom,pm8226@1 { |
| qcom,leds@d300 { |
| status = "okay"; |
| }; |
| |
| qcom,leds@d800 { |
| status = "okay"; |
| qcom,wled_0 { |
| label = "wled"; |
| linux,name = "wled:backlight"; |
| linux,default-trigger = "bkl-trigger"; |
| qcom,cs-out-en; |
| qcom,op-fdbck = <1>; |
| qcom,default-state = "on"; |
| qcom,max-current = <20>; |
| qcom,ctrl-delay-us = <0>; |
| qcom,boost-curr-lim = <3>; |
| qcom,cp-sel = <0>; |
| qcom,switch-freq = <11>; |
| qcom,ovp-val = <0>; |
| qcom,num-strings = <1>; |
| qcom,id = <0>; |
| }; |
| }; |
| |
| qcom,vibrator@c000 { |
| status = "okay"; |
| qcom,vib-timeout-ms = <15000>; |
| qcom,vib-vtg-level-mV = <3100>; |
| }; |
| |
| }; |
| }; |
| |
| / { |
| qrd_batterydata: qcom,battery-data { |
| qcom,rpull-up-kohm = <100>; |
| qcom,vref-batt-therm = <1800000>; |
| |
| /include/ "batterydata-qrd-4v35-2000mah.dtsi" |
| }; |
| }; |
| |
| &pm8226_bms { |
| status = "okay"; |
| qcom,enable-fcc-learning; |
| qcom,min-fcc-learning-soc = <20>; |
| qcom,min-fcc-ocv-pc = <30>; |
| qcom,min-fcc-learning-samples = <5>; |
| qcom,fcc-resolution = <10>; |
| qcom,battery-data = <&qrd_batterydata>; |
| }; |
| |
| &pm8226_chg { |
| status = "okay"; |
| qcom,battery-data = <&qrd_batterydata>; |
| qcom,tchg-mins = <240>; |
| qcom,ovp-monitor-en; |
| }; |
| |
| &pm8226_gpios { |
| gpio@c000 { /* GPIO 1 */ |
| /* XO_PMIC_CDC_MCLK enable for tapan codec */ |
| qcom,mode = <1>; /* Digital output */ |
| qcom,output-type = <0>; /* CMOS logic */ |
| qcom,pull = <5>; /* QPNP_PIN_PULL_NO*/ |
| qcom,vin-sel = <3>; /* QPNP_PIN_VIN3 */ |
| qcom,out-strength = <3>;/* QPNP_PIN_OUT_STRENGTH_HIGH */ |
| qcom,src-sel = <2>; /* QPNP_PIN_SEL_FUNC_1 */ |
| qcom,master-en = <1>; /* Enable GPIO */ |
| }; |
| |
| gpio@c100 { /* GPIO 2 */ |
| qcom,mode = <1>; |
| qcom,output-type = <0>; |
| qcom,pull = <5>; |
| qcom,vin-sel = <3>; |
| qcom,out-strength = <3>; |
| qcom,src-sel = <2>; |
| qcom,master-en = <1>; |
| }; |
| |
| gpio@c200 { /* GPIO 3 */ |
| }; |
| |
| gpio@c300 { /* GPIO 4 */ |
| }; |
| |
| gpio@c400 { /* GPIO 5 */ |
| }; |
| |
| gpio@c500 { /* GPIO 6 */ |
| }; |
| |
| gpio@c600 { /* GPIO 7 */ |
| }; |
| |
| gpio@c700 { /* GPIO 8 */ |
| }; |
| }; |
| |
| &pm8226_mpps { |
| mpp@a000 { /* MPP 1 */ |
| }; |
| |
| mpp@a100 { /* MPP 2 */ |
| }; |
| |
| mpp@a200 { /* MPP 3 */ |
| }; |
| |
| mpp@a300 { /* MPP 4 */ |
| }; |
| |
| mpp@a400 { /* MPP 5 */ |
| }; |
| |
| mpp@a500 { /* MPP 6 */ |
| }; |
| |
| mpp@a600 { /* MPP 7 */ |
| }; |
| |
| mpp@a700 { /* MPP 8 */ |
| }; |
| }; |
| |
| &slim_msm { |
| tapan_codec { |
| qcom,cdc-micbias1-ext-cap; |
| qcom,cdc-micbias3-ext-cap; |
| }; |
| }; |
| |
| &pm8226_vadc { |
| chan@30 { |
| label = "batt_therm"; |
| reg = <0x30>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <6>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| }; |
| |
| &android_usb { |
| qcom,android-usb-cdrom; |
| qcom,android-usb-internal-ums; |
| }; |
| |
| &mdss_mdp { |
| qcom,mdss-pref-prim-intf = "dsi"; |
| batfet-supply = <&pm8226_chg_batif>; |
| }; |
| |
| &mdss_dsi0 { |
| qcom,dsi-pref-prim-pan = <&dsi_nt35596_1080_vid>; |
| }; |
| |
| &dsi_nt35596_1080_vid { |
| qcom,cont-splash-enabled; |
| }; |