| /* Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <mach/clk-provider.h> |
| |
| #include "rpm_resources.h" |
| #include "clock-rpm.h" |
| |
| #define __clk_rpmrs_set_rate(r, value, ctx) \ |
| ((r)->rpmrs_data->set_rate_fn((r), (value), (ctx))) |
| |
| #define clk_rpmrs_set_rate_sleep(r, value) \ |
| __clk_rpmrs_set_rate((r), (value), (r)->rpmrs_data->ctx_sleep_id) |
| |
| #define clk_rpmrs_set_rate_active(r, value) \ |
| __clk_rpmrs_set_rate((r), (value), (r)->rpmrs_data->ctx_active_id) |
| |
| static int clk_rpmrs_set_rate(struct rpm_clk *r, uint32_t value, |
| uint32_t context) |
| { |
| struct msm_rpm_iv_pair iv = { |
| .id = r->rpm_clk_id, |
| .value = value, |
| }; |
| return msm_rpmrs_set(context, &iv, 1); |
| } |
| |
| static int clk_rpmrs_get_rate(struct rpm_clk *r) |
| { |
| int rc; |
| struct msm_rpm_iv_pair iv = { .id = r->rpm_status_id, }; |
| rc = msm_rpm_get_status(&iv, 1); |
| return (rc < 0) ? rc : iv.value * r->factor; |
| } |
| |
| static int clk_rpmrs_handoff(struct rpm_clk *r) |
| { |
| struct msm_rpm_iv_pair iv = { .id = r->rpm_status_id, }; |
| int rc = msm_rpm_get_status(&iv, 1); |
| |
| if (rc < 0) |
| return rc; |
| |
| if (!r->branch) { |
| r->last_set_khz = iv.value; |
| if (!r->active_only) |
| r->last_set_sleep_khz = iv.value; |
| r->c.rate = iv.value * r->factor; |
| } |
| |
| return 0; |
| } |
| |
| static int clk_rpmrs_set_rate_smd(struct rpm_clk *r, uint32_t value, |
| uint32_t context) |
| { |
| struct msm_rpm_kvp kvp = { |
| .key = r->rpm_key, |
| .data = (void *)&value, |
| .length = sizeof(value), |
| }; |
| |
| return msm_rpm_send_message(context, r->rpm_res_type, r->rpm_clk_id, |
| &kvp, 1); |
| } |
| |
| static int clk_rpmrs_handoff_smd(struct rpm_clk *r) |
| { |
| return 0; |
| } |
| |
| struct clk_rpmrs_data { |
| int (*set_rate_fn)(struct rpm_clk *r, uint32_t value, uint32_t context); |
| int (*get_rate_fn)(struct rpm_clk *r); |
| int (*handoff_fn)(struct rpm_clk *r); |
| int ctx_active_id; |
| int ctx_sleep_id; |
| }; |
| |
| struct clk_rpmrs_data clk_rpmrs_data = { |
| .set_rate_fn = clk_rpmrs_set_rate, |
| .get_rate_fn = clk_rpmrs_get_rate, |
| .handoff_fn = clk_rpmrs_handoff, |
| .ctx_active_id = MSM_RPM_CTX_SET_0, |
| .ctx_sleep_id = MSM_RPM_CTX_SET_SLEEP, |
| }; |
| |
| struct clk_rpmrs_data clk_rpmrs_data_smd = { |
| .set_rate_fn = clk_rpmrs_set_rate_smd, |
| .handoff_fn = clk_rpmrs_handoff_smd, |
| .ctx_active_id = MSM_RPM_CTX_ACTIVE_SET, |
| .ctx_sleep_id = MSM_RPM_CTX_SLEEP_SET, |
| }; |
| |
| static DEFINE_MUTEX(rpm_clock_lock); |
| |
| static int rpm_clk_prepare(struct clk *clk) |
| { |
| struct rpm_clk *r = to_rpm_clk(clk); |
| uint32_t value; |
| int rc = 0; |
| unsigned long this_khz, this_sleep_khz; |
| unsigned long peer_khz = 0, peer_sleep_khz = 0; |
| struct rpm_clk *peer = r->peer; |
| |
| mutex_lock(&rpm_clock_lock); |
| |
| this_khz = r->last_set_khz; |
| /* Don't send requests to the RPM if the rate has not been set. */ |
| if (this_khz == 0) |
| goto out; |
| |
| this_sleep_khz = r->last_set_sleep_khz; |
| |
| /* Take peer clock's rate into account only if it's enabled. */ |
| if (peer->enabled) { |
| peer_khz = peer->last_set_khz; |
| peer_sleep_khz = peer->last_set_sleep_khz; |
| } |
| |
| value = max(this_khz, peer_khz); |
| if (r->branch) |
| value = !!value; |
| |
| rc = clk_rpmrs_set_rate_active(r, value); |
| if (rc) |
| goto out; |
| |
| value = max(this_sleep_khz, peer_sleep_khz); |
| if (r->branch) |
| value = !!value; |
| |
| rc = clk_rpmrs_set_rate_sleep(r, value); |
| if (rc) { |
| /* Undo the active set vote and restore it to peer_khz */ |
| value = peer_khz; |
| rc = clk_rpmrs_set_rate_active(r, value); |
| } |
| |
| out: |
| if (!rc) |
| r->enabled = true; |
| |
| mutex_unlock(&rpm_clock_lock); |
| |
| return rc; |
| } |
| |
| static void rpm_clk_unprepare(struct clk *clk) |
| { |
| struct rpm_clk *r = to_rpm_clk(clk); |
| |
| mutex_lock(&rpm_clock_lock); |
| |
| if (r->last_set_khz) { |
| uint32_t value; |
| struct rpm_clk *peer = r->peer; |
| unsigned long peer_khz = 0, peer_sleep_khz = 0; |
| int rc; |
| |
| /* Take peer clock's rate into account only if it's enabled. */ |
| if (peer->enabled) { |
| peer_khz = peer->last_set_khz; |
| peer_sleep_khz = peer->last_set_sleep_khz; |
| } |
| |
| value = r->branch ? !!peer_khz : peer_khz; |
| rc = clk_rpmrs_set_rate_active(r, value); |
| if (rc) |
| goto out; |
| |
| value = r->branch ? !!peer_sleep_khz : peer_sleep_khz; |
| rc = clk_rpmrs_set_rate_sleep(r, value); |
| } |
| r->enabled = false; |
| out: |
| mutex_unlock(&rpm_clock_lock); |
| |
| return; |
| } |
| |
| static int rpm_clk_set_rate(struct clk *clk, unsigned long rate) |
| { |
| struct rpm_clk *r = to_rpm_clk(clk); |
| unsigned long this_khz, this_sleep_khz; |
| int rc = 0; |
| |
| this_khz = DIV_ROUND_UP(rate, r->factor); |
| |
| mutex_lock(&rpm_clock_lock); |
| |
| /* Active-only clocks don't care what the rate is during sleep. So, |
| * they vote for zero. */ |
| if (r->active_only) |
| this_sleep_khz = 0; |
| else |
| this_sleep_khz = this_khz; |
| |
| if (r->enabled) { |
| uint32_t value; |
| struct rpm_clk *peer = r->peer; |
| unsigned long peer_khz = 0, peer_sleep_khz = 0; |
| |
| /* Take peer clock's rate into account only if it's enabled. */ |
| if (peer->enabled) { |
| peer_khz = peer->last_set_khz; |
| peer_sleep_khz = peer->last_set_sleep_khz; |
| } |
| |
| value = max(this_khz, peer_khz); |
| rc = clk_rpmrs_set_rate_active(r, value); |
| if (rc) |
| goto out; |
| |
| value = max(this_sleep_khz, peer_sleep_khz); |
| rc = clk_rpmrs_set_rate_sleep(r, value); |
| } |
| if (!rc) { |
| r->last_set_khz = this_khz; |
| r->last_set_sleep_khz = this_sleep_khz; |
| } |
| |
| out: |
| mutex_unlock(&rpm_clock_lock); |
| |
| return rc; |
| } |
| |
| static unsigned long rpm_clk_get_rate(struct clk *clk) |
| { |
| struct rpm_clk *r = to_rpm_clk(clk); |
| if (r->rpmrs_data->get_rate_fn) |
| return r->rpmrs_data->get_rate_fn(r); |
| else |
| return clk->rate; |
| } |
| |
| static int rpm_clk_is_enabled(struct clk *clk) |
| { |
| return !!(rpm_clk_get_rate(clk)); |
| } |
| |
| static long rpm_clk_round_rate(struct clk *clk, unsigned long rate) |
| { |
| /* Not supported. */ |
| return rate; |
| } |
| |
| static bool rpm_clk_is_local(struct clk *clk) |
| { |
| return false; |
| } |
| |
| static enum handoff rpm_clk_handoff(struct clk *clk) |
| { |
| struct rpm_clk *r = to_rpm_clk(clk); |
| int rc; |
| |
| /* |
| * Querying an RPM clock's status will return 0 unless the clock's |
| * rate has previously been set through the RPM. When handing off, |
| * assume these clocks are enabled (unless the RPM call fails) so |
| * child clocks of these RPM clocks can still be handed off. |
| */ |
| rc = r->rpmrs_data->handoff_fn(r); |
| if (rc < 0) |
| return HANDOFF_DISABLED_CLK; |
| |
| return HANDOFF_ENABLED_CLK; |
| } |
| |
| #define RPM_MISC_CLK_TYPE 0x306b6c63 |
| #define RPM_SCALING_ENABLE_ID 0x2 |
| |
| void enable_rpm_scaling(void) |
| { |
| int rc, value = 0x1; |
| struct msm_rpm_kvp kvp = { |
| .key = RPM_SMD_KEY_ENABLE, |
| .data = (void *)&value, |
| .length = sizeof(value), |
| }; |
| |
| rc = msm_rpm_send_message_noirq(MSM_RPM_CTX_SLEEP_SET, |
| RPM_MISC_CLK_TYPE, RPM_SCALING_ENABLE_ID, &kvp, 1); |
| WARN(rc < 0, "RPM clock scaling (sleep set) did not enable!\n"); |
| |
| rc = msm_rpm_send_message_noirq(MSM_RPM_CTX_ACTIVE_SET, |
| RPM_MISC_CLK_TYPE, RPM_SCALING_ENABLE_ID, &kvp, 1); |
| WARN(rc < 0, "RPM clock scaling (active set) did not enable!\n"); |
| } |
| |
| struct clk_ops clk_ops_rpm = { |
| .prepare = rpm_clk_prepare, |
| .unprepare = rpm_clk_unprepare, |
| .set_rate = rpm_clk_set_rate, |
| .get_rate = rpm_clk_get_rate, |
| .is_enabled = rpm_clk_is_enabled, |
| .round_rate = rpm_clk_round_rate, |
| .is_local = rpm_clk_is_local, |
| .handoff = rpm_clk_handoff, |
| }; |
| |
| struct clk_ops clk_ops_rpm_branch = { |
| .prepare = rpm_clk_prepare, |
| .unprepare = rpm_clk_unprepare, |
| .is_local = rpm_clk_is_local, |
| .handoff = rpm_clk_handoff, |
| }; |