diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index aeb5309..abc6bd2 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -436,6 +436,21 @@
 	bool
 	default n
 
+config PPC_MPC5200
+	bool
+	select PPC_MPC52xx
+	default n
+
+config PPC_MPC5200_BUGFIX
+	bool "MPC5200 (L25R) bugfix support"
+	depends on PPC_MPC5200
+	default n
+	help
+	  Enable workarounds for original MPC5200 errata.  This is not required
+	  for MPC5200B based boards.
+
+	  It is safe to say 'Y' here
+
 config PPC_EFIKA
 	bool "bPlan Efika 5k2. MPC5200B based computer"
 	depends on PPC_MULTIPLATFORM && PPC32
@@ -448,7 +463,7 @@
 config PPC_LITE5200
 	bool "Freescale Lite5200 Eval Board"
 	depends on PPC_MULTIPLATFORM && PPC32
-	select PPC_MPC52xx
+	select PPC_MPC5200
 	default n
 
 config PPC_PMAC
@@ -1206,7 +1221,7 @@
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
-	depends on PPC64 && KALLSYMS && EXPERIMENTAL && MODULES
+	depends on !BOOKE && !4xx && KALLSYMS && EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 34dc37e..919fbf5 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -281,10 +281,10 @@
 
 	/*
 	 * Every platform is required to implement ppc_md.get_irq.
-	 * This function will either return an irq number or -1 to
+	 * This function will either return an irq number or NO_IRQ to
 	 * indicate there are no more pending.
-	 * The value -2 is for buggy hardware and means that this IRQ
-	 * has already been handled. -- Tom
+	 * The value NO_IRQ_IGNORE is for buggy hardware and means that this
+	 * IRQ has already been handled. -- Tom
 	 */
 	irq = ppc_md.get_irq();
 
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 4657563..dd2886f 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -46,8 +46,8 @@
 	if ((unsigned long)p->addr & 0x03) {
 		printk("Attempt to register kprobe at an unaligned address\n");
 		ret = -EINVAL;
-	} else if (IS_MTMSRD(insn) || IS_RFID(insn)) {
-		printk("Cannot register a kprobe on rfid or mtmsrd\n");
+	} else if (IS_MTMSRD(insn) || IS_RFID(insn) || IS_RFI(insn)) {
+		printk("Cannot register a kprobe on rfi/rfid or mtmsr[d]\n");
 		ret = -EINVAL;
 	}
 
@@ -483,8 +483,12 @@
 	memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs));
 
 	/* setup return addr to the jprobe handler routine */
+#ifdef CONFIG_PPC64
 	regs->nip = (unsigned long)(((func_descr_t *)jp->entry)->entry);
 	regs->gpr[2] = (unsigned long)(((func_descr_t *)jp->entry)->toc);
+#else
+	regs->nip = (unsigned long)jp->entry;
+#endif
 
 	return 1;
 }
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 41c05dc..0de5a08 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -439,6 +439,10 @@
 
 	ssize_t retval = -ENOMEM;
 
+	if (!firmware_has_feature(FW_FEATURE_SPLPAR) ||
+			firmware_has_feature(FW_FEATURE_ISERIES))
+		return -EINVAL;
+
 	kbuf = kmalloc(count, GFP_KERNEL);
 	if (!kbuf)
 		goto out;
@@ -517,7 +521,7 @@
 static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 			     size_t count, loff_t * off)
 {
-	return count;
+	return -EINVAL;
 }
 
 #endif				/* CONFIG_PPC_PSERIES */
@@ -570,6 +574,7 @@
 struct file_operations lparcfg_fops = {
 	.owner		= THIS_MODULE,
 	.read		= seq_read,
+	.write		= lparcfg_write,
 	.open		= lparcfg_open,
 	.release	= single_release,
 };
@@ -581,10 +586,8 @@
 
 	/* Allow writing if we have FW_FEATURE_SPLPAR */
 	if (firmware_has_feature(FW_FEATURE_SPLPAR) &&
-			!firmware_has_feature(FW_FEATURE_ISERIES)) {
-		lparcfg_fops.write = lparcfg_write;
+			!firmware_has_feature(FW_FEATURE_ISERIES))
 		mode |= S_IWUSR;
-	}
 
 	ent = create_proc_entry("ppc64/lparcfg", mode, NULL);
 	if (ent) {
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 61c65d1..6a19fa4 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -65,6 +65,7 @@
 
 #ifdef CONFIG_VGA_CONSOLE
 unsigned long vgacon_remap_base;
+EXPORT_SYMBOL(vgacon_remap_base);
 #endif
 
 /*
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 6915b91..dcc6f15 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -535,34 +535,40 @@
 	}
 }
 
-static void parse_fpe(struct pt_regs *regs)
+static inline int __parse_fpscr(unsigned long fpscr)
 {
-	int code = 0;
-	unsigned long fpscr;
-
-	flush_fp_to_thread(current);
-
-	fpscr = current->thread.fpscr.val;
+	int ret = 0;
 
 	/* Invalid operation */
 	if ((fpscr & FPSCR_VE) && (fpscr & FPSCR_VX))
-		code = FPE_FLTINV;
+		ret = FPE_FLTINV;
 
 	/* Overflow */
 	else if ((fpscr & FPSCR_OE) && (fpscr & FPSCR_OX))
-		code = FPE_FLTOVF;
+		ret = FPE_FLTOVF;
 
 	/* Underflow */
 	else if ((fpscr & FPSCR_UE) && (fpscr & FPSCR_UX))
-		code = FPE_FLTUND;
+		ret = FPE_FLTUND;
 
 	/* Divide by zero */
 	else if ((fpscr & FPSCR_ZE) && (fpscr & FPSCR_ZX))
-		code = FPE_FLTDIV;
+		ret = FPE_FLTDIV;
 
 	/* Inexact result */
 	else if ((fpscr & FPSCR_XE) && (fpscr & FPSCR_XX))
-		code = FPE_FLTRES;
+		ret = FPE_FLTRES;
+
+	return ret;
+}
+
+static void parse_fpe(struct pt_regs *regs)
+{
+	int code = 0;
+
+	flush_fp_to_thread(current);
+
+	code = __parse_fpscr(current->thread.fpscr.val);
 
 	_exception(SIGFPE, regs, code, regs->nip);
 }
@@ -739,20 +745,7 @@
 	extern int do_mathemu(struct pt_regs *regs);
 
 	/* We can now get here via a FP Unavailable exception if the core
-	 * has no FPU, in that case no reason flags will be set */
-#ifdef CONFIG_MATH_EMULATION
-	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
-	 * but there seems to be a hardware bug on the 405GP (RevD)
-	 * that means ESR is sometimes set incorrectly - either to
-	 * ESR_DST (!?) or 0.  In the process of chasing this with the
-	 * hardware people - not sure if it can happen on any illegal
-	 * instruction or only on FP instructions, whether there is a
-	 * pattern to occurences etc. -dgibson 31/Mar/2003 */
-	if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) {
-		emulate_single_step(regs);
-		return;
-	}
-#endif /* CONFIG_MATH_EMULATION */
+	 * has no FPU, in that case the reason flags will be 0 */
 
 	if (reason & REASON_FP) {
 		/* IEEE FP exception */
@@ -778,6 +771,31 @@
 
 	local_irq_enable();
 
+#ifdef CONFIG_MATH_EMULATION
+	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
+	 * but there seems to be a hardware bug on the 405GP (RevD)
+	 * that means ESR is sometimes set incorrectly - either to
+	 * ESR_DST (!?) or 0.  In the process of chasing this with the
+	 * hardware people - not sure if it can happen on any illegal
+	 * instruction or only on FP instructions, whether there is a
+	 * pattern to occurences etc. -dgibson 31/Mar/2003 */
+	switch (do_mathemu(regs)) {
+	case 0:
+		emulate_single_step(regs);
+		return;
+	case 1: {
+			int code = 0;
+			code = __parse_fpscr(current->thread.fpscr.val);
+			_exception(SIGFPE, regs, code, regs->nip);
+			return;
+		}
+	case -EFAULT:
+		_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
+		return;
+	}
+	/* fall through on any other errors */
+#endif /* CONFIG_MATH_EMULATION */
+
 	/* Try to emulate it if we should. */
 	if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
 		switch (emulate_instruction(regs)) {
@@ -891,18 +909,39 @@
 
 #ifdef CONFIG_MATH_EMULATION
 	errcode = do_mathemu(regs);
+
+	switch (errcode) {
+	case 0:
+		emulate_single_step(regs);
+		return;
+	case 1: {
+			int code = 0;
+			code = __parse_fpscr(current->thread.fpscr.val);
+			_exception(SIGFPE, regs, code, regs->nip);
+			return;
+		}
+	case -EFAULT:
+		_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
+		return;
+	default:
+		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+		return;
+	}
+
 #else
 	errcode = Soft_emulate_8xx(regs);
-#endif
-	if (errcode) {
-		if (errcode > 0)
-			_exception(SIGFPE, regs, 0, 0);
-		else if (errcode == -EFAULT)
-			_exception(SIGSEGV, regs, 0, 0);
-		else
-			_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-	} else
+	switch (errcode) {
+	case 0:
 		emulate_single_step(regs);
+		return;
+	case 1:
+		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+		return;
+	case -EFAULT:
+		_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
+		return;
+	}
+#endif
 }
 #endif /* CONFIG_8xx */
 
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index e2d4141..4b1ba49 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -16,11 +16,11 @@
 			   strcase.o
 obj-$(CONFIG_QUICC_ENGINE) += rheap.o
 obj-$(CONFIG_XMON)	+= sstep.o
+obj-$(CONFIG_KPROBES)	+= sstep.o
 obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-noncoherent.o
 
 ifeq ($(CONFIG_PPC64),y)
 obj-$(CONFIG_SMP)	+= locks.o
-obj-$(CONFIG_DEBUG_KERNEL) += sstep.o
 endif
 
 # Temporary hack until we have migrated to asm-powerpc
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index 4bbda6b..6c5c5dd 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -14,6 +14,7 @@
  */
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
 
@@ -671,7 +672,7 @@
 	int maxnr;
 	int i, nr;
 
-	maxnr = sizeof(st) / sizeof(st[0]);
+	maxnr = ARRAY_SIZE(st);
 
 	printk(KERN_INFO
 	       "info @0x%p (%d slots empty / %d max)\n",
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index c85eda6..77b4637 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -61,10 +61,6 @@
 extern void hash_preload(struct mm_struct *mm, unsigned long ea,
 			 unsigned long access, unsigned long trap);
 
-/*
- * This is called by /dev/mem to know if a given address has to
- * be mapped non-cacheable or not
- */
 int page_is_ram(unsigned long pfn)
 {
 	unsigned long paddr = (pfn << PAGE_SHIFT);
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index a46184a..795b713 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -3,6 +3,7 @@
 #
 ifeq ($(CONFIG_PPC_MERGE),y)
 obj-y				+= mpc52xx_pic.o mpc52xx_common.o
+obj-$(CONFIG_PCI)		+= mpc52xx_pci.o
 endif
 
 obj-$(CONFIG_PPC_EFIKA)		+= efika-setup.o efika-pci.o
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 0f21bab..cdb16bf 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -107,6 +107,12 @@
 	mpc52xx_setup_cpu();	/* Generic */
 	lite52xx_setup_cpu();	/* Platorm specific */
 
+#ifdef CONFIG_PCI
+	np = of_find_node_by_type(np, "pci");
+	if (np)
+		mpc52xx_add_bridge(np);
+#endif
+
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start)
 		ROOT_DEV = Root_RAM0;
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
new file mode 100644
index 0000000..faf161b
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -0,0 +1,412 @@
+/*
+ * PCI code for the Freescale MPC52xx embedded CPU.
+ *
+ * Copyright (C) 2006 Secret Lab Technologies Ltd.
+ *                        Grant Likely <grant.likely@secretlab.ca>
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#undef DEBUG
+
+#include <asm/pci.h>
+#include <asm/mpc52xx.h>
+#include <asm/delay.h>
+#include <asm/machdep.h>
+#include <linux/kernel.h>
+
+
+/* ======================================================================== */
+/* PCI windows config                                                       */
+/* ======================================================================== */
+
+#define MPC52xx_PCI_TARGET_IO	0xf0000000
+#define MPC52xx_PCI_TARGET_MEM	0x00000000
+
+
+/* ======================================================================== */
+/* Structures mapping & Defines for PCI Unit                                */
+/* ======================================================================== */
+
+#define MPC52xx_PCI_GSCR_BM		0x40000000
+#define MPC52xx_PCI_GSCR_PE		0x20000000
+#define MPC52xx_PCI_GSCR_SE		0x10000000
+#define MPC52xx_PCI_GSCR_XLB2PCI_MASK	0x07000000
+#define MPC52xx_PCI_GSCR_XLB2PCI_SHIFT	24
+#define MPC52xx_PCI_GSCR_IPG2PCI_MASK	0x00070000
+#define MPC52xx_PCI_GSCR_IPG2PCI_SHIFT	16
+#define MPC52xx_PCI_GSCR_BME		0x00004000
+#define MPC52xx_PCI_GSCR_PEE		0x00002000
+#define MPC52xx_PCI_GSCR_SEE		0x00001000
+#define MPC52xx_PCI_GSCR_PR		0x00000001
+
+
+#define MPC52xx_PCI_IWBTAR_TRANSLATION(proc_ad,pci_ad,size)	  \
+		( ( (proc_ad) & 0xff000000 )			| \
+		  ( (((size) - 1) >> 8) & 0x00ff0000 )		| \
+		  ( ((pci_ad) >> 16) & 0x0000ff00 ) )
+
+#define MPC52xx_PCI_IWCR_PACK(win0,win1,win2)	(((win0) << 24) | \
+						 ((win1) << 16) | \
+						 ((win2) <<  8))
+
+#define MPC52xx_PCI_IWCR_DISABLE	0x0
+#define MPC52xx_PCI_IWCR_ENABLE		0x1
+#define MPC52xx_PCI_IWCR_READ		0x0
+#define MPC52xx_PCI_IWCR_READ_LINE	0x2
+#define MPC52xx_PCI_IWCR_READ_MULTI	0x4
+#define MPC52xx_PCI_IWCR_MEM		0x0
+#define MPC52xx_PCI_IWCR_IO		0x8
+
+#define MPC52xx_PCI_TCR_P		0x01000000
+#define MPC52xx_PCI_TCR_LD		0x00010000
+
+#define MPC52xx_PCI_TBATR_DISABLE	0x0
+#define MPC52xx_PCI_TBATR_ENABLE	0x1
+
+struct mpc52xx_pci {
+	u32	idr;		/* PCI + 0x00 */
+	u32	scr;		/* PCI + 0x04 */
+	u32	ccrir;		/* PCI + 0x08 */
+	u32	cr1;		/* PCI + 0x0C */
+	u32	bar0;		/* PCI + 0x10 */
+	u32	bar1;		/* PCI + 0x14 */
+	u8	reserved1[16];	/* PCI + 0x18 */
+	u32	ccpr;		/* PCI + 0x28 */
+	u32	sid;		/* PCI + 0x2C */
+	u32	erbar;		/* PCI + 0x30 */
+	u32	cpr;		/* PCI + 0x34 */
+	u8	reserved2[4];	/* PCI + 0x38 */
+	u32	cr2;		/* PCI + 0x3C */
+	u8	reserved3[32];	/* PCI + 0x40 */
+	u32	gscr;		/* PCI + 0x60 */
+	u32	tbatr0;		/* PCI + 0x64 */
+	u32	tbatr1;		/* PCI + 0x68 */
+	u32	tcr;		/* PCI + 0x6C */
+	u32	iw0btar;	/* PCI + 0x70 */
+	u32	iw1btar;	/* PCI + 0x74 */
+	u32	iw2btar;	/* PCI + 0x78 */
+	u8	reserved4[4];	/* PCI + 0x7C */
+	u32	iwcr;		/* PCI + 0x80 */
+	u32	icr;		/* PCI + 0x84 */
+	u32	isr;		/* PCI + 0x88 */
+	u32	arb;		/* PCI + 0x8C */
+	u8	reserved5[104];	/* PCI + 0x90 */
+	u32	car;		/* PCI + 0xF8 */
+	u8	reserved6[4];	/* PCI + 0xFC */
+};
+
+
+/* ======================================================================== */
+/* PCI configuration acess                                                  */
+/* ======================================================================== */
+
+static int
+mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+				int offset, int len, u32 *val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	u32 value;
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(bus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	out_be32(hose->cfg_addr,
+		(1 << 31) |
+		((bus->number - hose->bus_offset) << 16) |
+		(devfn << 8) |
+		(offset & 0xfc));
+	mb();
+
+#if defined(CONFIG_PPC_MPC5200_BUGFIX)
+	if (bus->number != hose->bus_offset) {
+		/* workaround for the bug 435 of the MPC5200 (L25R);
+		 * Don't do 32 bits config access during type-1 cycles */
+		switch (len) {
+		      case 1:
+			value = in_8(((u8 __iomem *)hose->cfg_data) +
+			             (offset & 3));
+			break;
+		      case 2:
+			value = in_le16(((u16 __iomem *)hose->cfg_data) +
+			                ((offset>>1) & 1));
+			break;
+
+		      default:
+			value = in_le16((u16 __iomem *)hose->cfg_data) |
+				(in_le16(((u16 __iomem *)hose->cfg_data) + 1) << 16);
+			break;
+		}
+	}
+	else
+#endif
+	{
+		value = in_le32(hose->cfg_data);
+
+		if (len != 4) {
+			value >>= ((offset & 0x3) << 3);
+			value &= 0xffffffff >> (32 - (len << 3));
+		}
+	}
+
+	*val = value;
+
+	out_be32(hose->cfg_addr, 0);
+	mb();
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+				int offset, int len, u32 val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	u32 value, mask;
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(bus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	out_be32(hose->cfg_addr,
+		(1 << 31) |
+		((bus->number - hose->bus_offset) << 16) |
+		(devfn << 8) |
+		(offset & 0xfc));
+	mb();
+
+#if defined(CONFIG_PPC_MPC5200_BUGFIX)
+	if (bus->number != hose->bus_offset) {
+		/* workaround for the bug 435 of the MPC5200 (L25R);
+		 * Don't do 32 bits config access during type-1 cycles */
+		switch (len) {
+		      case 1:
+			out_8(((u8 __iomem *)hose->cfg_data) +
+				(offset & 3), val);
+			break;
+		      case 2:
+			out_le16(((u16 __iomem *)hose->cfg_data) +
+				((offset>>1) & 1), val);
+			break;
+
+		      default:
+			out_le16((u16 __iomem *)hose->cfg_data,
+				(u16)val);
+			out_le16(((u16 __iomem *)hose->cfg_data) + 1,
+				(u16)(val>>16));
+			break;
+		}
+	}
+	else
+#endif
+	{
+		if (len != 4) {
+			value = in_le32(hose->cfg_data);
+
+			offset = (offset & 0x3) << 3;
+			mask = (0xffffffff >> (32 - (len << 3)));
+			mask <<= offset;
+
+			value &= ~mask;
+			val = value | ((val << offset) & mask);
+		}
+
+		out_le32(hose->cfg_data, val);
+	}
+	mb();
+
+	out_be32(hose->cfg_addr, 0);
+	mb();
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops mpc52xx_pci_ops = {
+	.read  = mpc52xx_pci_read_config,
+	.write = mpc52xx_pci_write_config
+};
+
+
+/* ======================================================================== */
+/* PCI setup                                                                */
+/* ======================================================================== */
+
+static void __init
+mpc52xx_pci_setup(struct pci_controller *hose,
+                  struct mpc52xx_pci __iomem *pci_regs)
+{
+	struct resource *res;
+	u32 tmp;
+	int iwcr0 = 0, iwcr1 = 0, iwcr2 = 0;
+
+	pr_debug("mpc52xx_pci_setup(hose=%p, pci_regs=%p)\n", hose, pci_regs);
+
+	/* pci_process_bridge_OF_ranges() found all our addresses for us;
+	 * now store them in the right places */
+	hose->cfg_addr = &pci_regs->car;
+	hose->cfg_data = hose->io_base_virt;
+
+	/* Control regs */
+	tmp = in_be32(&pci_regs->scr);
+	tmp |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	out_be32(&pci_regs->scr, tmp);
+
+	/* Memory windows */
+	res = &hose->mem_resources[0];
+	if (res->flags) {
+		pr_debug("mem_resource[0] = {.start=%x, .end=%x, .flags=%lx}\n",
+		         res->start, res->end, res->flags);
+		out_be32(&pci_regs->iw0btar,
+		         MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start,
+		                  res->end - res->start + 1));
+		iwcr0 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM;
+		if (res->flags & IORESOURCE_PREFETCH)
+			iwcr0 |= MPC52xx_PCI_IWCR_READ_MULTI;
+		else
+			iwcr0 |= MPC52xx_PCI_IWCR_READ;
+	}
+
+	res = &hose->mem_resources[1];
+	if (res->flags) {
+		pr_debug("mem_resource[1] = {.start=%x, .end=%x, .flags=%lx}\n",
+		         res->start, res->end, res->flags);
+		out_be32(&pci_regs->iw1btar,
+		         MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start,
+		                  res->end - res->start + 1));
+		iwcr1 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM;
+		if (res->flags & IORESOURCE_PREFETCH)
+			iwcr1 |= MPC52xx_PCI_IWCR_READ_MULTI;
+		else
+			iwcr1 |= MPC52xx_PCI_IWCR_READ;
+	}
+
+	/* IO resources */
+	res = &hose->io_resource;
+	if (!res) {
+		printk(KERN_ERR "%s: Didn't find IO resources\n", __FILE__);
+		return;
+	}
+	pr_debug(".io_resource={.start=%x,.end=%x,.flags=%lx} "
+	         ".io_base_phys=0x%p\n",
+	         res->start, res->end, res->flags, (void*)hose->io_base_phys);
+	out_be32(&pci_regs->iw2btar,
+	         MPC52xx_PCI_IWBTAR_TRANSLATION(hose->io_base_phys,
+	                                        res->start,
+	                                        res->end - res->start + 1));
+	iwcr2 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_IO;
+
+	/* Set all the IWCR fields at once; they're in the same reg */
+	out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(iwcr0, iwcr1, iwcr2));
+
+	out_be32(&pci_regs->tbatr0,
+		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO );
+	out_be32(&pci_regs->tbatr1,
+		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
+
+	out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
+
+	tmp = in_be32(&pci_regs->gscr);
+#if 0
+	/* Reset the exteral bus ( internal PCI controller is NOT resetted ) */
+	/* Not necessary and can be a bad thing if for example the bootloader
+	   is displaying a splash screen or ... Just left here for
+	   documentation purpose if anyone need it */
+	out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR);
+	udelay(50);
+#endif
+
+	/* Make sure the PCI bridge is out of reset */
+	out_be32(&pci_regs->gscr, tmp & ~MPC52xx_PCI_GSCR_PR);
+}
+
+static void
+mpc52xx_pci_fixup_resources(struct pci_dev *dev)
+{
+	int i;
+
+	pr_debug("mpc52xx_pci_fixup_resources() %.4x:%.4x\n",
+	         dev->vendor, dev->device);
+
+	/* We don't rely on boot loader for PCI and resets all
+	   devices */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		struct resource *res = &dev->resource[i];
+		if (res->end > res->start) {	/* Only valid resources */
+			res->end -= res->start;
+			res->start = 0;
+			res->flags |= IORESOURCE_UNSET;
+		}
+	}
+
+	/* The PCI Host bridge of MPC52xx has a prefetch memory resource
+	   fixed to 1Gb. Doesn't fit in the resource system so we remove it */
+	if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
+	     (   dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200
+	      || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) {
+		struct resource *res = &dev->resource[1];
+		res->start = res->end = res->flags = 0;
+	}
+}
+
+int __init
+mpc52xx_add_bridge(struct device_node *node)
+{
+	int len;
+	struct mpc52xx_pci __iomem *pci_regs;
+	struct pci_controller *hose;
+	const int *bus_range;
+	struct resource rsrc;
+
+	pr_debug("Adding MPC52xx PCI host bridge %s\n", node->full_name);
+
+	pci_assign_all_buses = 1;
+
+	if (of_address_to_resource(node, 0, &rsrc) != 0) {
+		printk(KERN_ERR "Can't get %s resources\n", node->full_name);
+		return -EINVAL;
+	}
+
+	bus_range = get_property(node, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get %s bus-range, assume bus 0\n",
+		       node->full_name);
+		bus_range = NULL;
+	}
+
+	/* There are some PCI quirks on the 52xx, register the hook to
+	 * fix them. */
+	ppc_md.pcibios_fixup_resources = mpc52xx_pci_fixup_resources;
+
+	/* Alloc and initialize the pci controller.  Values in the device
+	 * tree are needed to configure the 52xx PCI controller.  Rather
+	 * than parse the tree here, let pci_process_bridge_OF_ranges()
+	 * do it for us and extract the values after the fact */
+	hose = pcibios_alloc_controller();
+	if (!hose)
+		return -ENOMEM;
+
+	hose->arch_data = node;
+	hose->set_cfg_type = 1;
+
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	hose->bus_offset = 0;
+	hose->ops = &mpc52xx_pci_ops;
+
+	pci_regs = ioremap(rsrc.start, rsrc.end - rsrc.start + 1);
+	if (!pci_regs)
+		return -ENOMEM;
+
+	pci_process_bridge_OF_ranges(hose, node, 1);
+
+	/* Finish setting up PCI using values obtained by
+	 * pci_proces_bridge_OF_ranges */
+	mpc52xx_pci_setup(hose, pci_regs);
+
+	return 0;
+}
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index 1c7b2ba..90522e3 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -59,6 +59,7 @@
 	{FW_FEATURE_XDABR,		"hcall-xdabr"},
 	{FW_FEATURE_MULTITCE,		"hcall-multi-tce"},
 	{FW_FEATURE_SPLPAR,		"hcall-splpar"},
+	{FW_FEATURE_BULK_REMOVE,	"hcall-bulk"},
 };
 
 /* Build up the firmware features bitmask using the contents of
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 5a684fb..7496005 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -516,7 +516,7 @@
 static void pSeries_lpar_flush_hash_range(unsigned long number, int local)
 {
 	unsigned long i, pix, rc;
-	unsigned long flags;
+	unsigned long flags = 0;
 	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
 	int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
 	unsigned long param[9];
@@ -540,16 +540,22 @@
 				hash = ~hash;
 			slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
 			slot += hidx & _PTEIDX_GROUP_IX;
-			param[pix] = HBR_REQUEST | HBR_AVPN | slot;
-			param[pix+1] = hpte_encode_v(va, psize) & HPTE_V_AVPN;
-			pix += 2;
-			if (pix == 8) {
-				rc = plpar_hcall9(H_BULK_REMOVE, param,
+			if (!firmware_has_feature(FW_FEATURE_BULK_REMOVE)) {
+				pSeries_lpar_hpte_invalidate(slot, va, psize,
+							     local);
+			} else {
+				param[pix] = HBR_REQUEST | HBR_AVPN | slot;
+				param[pix+1] = hpte_encode_v(va, psize) &
+					HPTE_V_AVPN;
+				pix += 2;
+				if (pix == 8) {
+					rc = plpar_hcall9(H_BULK_REMOVE, param,
 						param[0], param[1], param[2],
 						param[3], param[4], param[5],
 						param[6], param[7]);
-				BUG_ON(rc != H_SUCCESS);
-				pix = 0;
+					BUG_ON(rc != H_SUCCESS);
+					pix = 0;
+				}
 			}
 		} pte_iterate_hashed_end();
 	}
diff --git a/arch/powerpc/xmon/ppc-opc.c b/arch/powerpc/xmon/ppc-opc.c
index 5d841f4..af3780e 100644
--- a/arch/powerpc/xmon/ppc-opc.c
+++ b/arch/powerpc/xmon/ppc-opc.c
@@ -21,6 +21,7 @@
    02110-1301, USA.  */
 
 #include <linux/stddef.h>
+#include <linux/kernel.h>
 #include "nonstdio.h"
 #include "ppc.h"
 
@@ -4932,8 +4933,7 @@
 
 };
 
-const int powerpc_num_opcodes =
-  sizeof (powerpc_opcodes) / sizeof (powerpc_opcodes[0]);
+const int powerpc_num_opcodes = ARRAY_SIZE(powerpc_opcodes);
 
 /* The macro table.  This is only used by the assembler.  */
 
@@ -4989,5 +4989,4 @@
 { "clrlslwi.",4,  PPCCOM,	"rlwinm. %0,%1,%3,(%2)-(%3),31-(%3)" },
 };
 
-const int powerpc_num_macros =
-  sizeof (powerpc_macros) / sizeof (powerpc_macros[0]);
+const int powerpc_num_macros = ARRAY_SIZE(powerpc_macros);
diff --git a/arch/powerpc/xmon/spu-opc.c b/arch/powerpc/xmon/spu-opc.c
index efffde9..530df3d 100644
--- a/arch/powerpc/xmon/spu-opc.c
+++ b/arch/powerpc/xmon/spu-opc.c
@@ -18,6 +18,7 @@
    with this program; if not, write to the Free Software Foundation, Inc.,
    51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */
 
+#include <linux/kernel.h>
 #include "spu.h"
 
 /* This file holds the Spu opcode table */
@@ -40,5 +41,4 @@
 #undef APUOPFB
 };
 
-const int spu_num_opcodes =
-  sizeof (spu_opcodes) / sizeof (spu_opcodes[0]);
+const int spu_num_opcodes = ARRAY_SIZE(spu_opcodes);
diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c
index b7bb5f0..684ed04 100644
--- a/arch/ppc/8xx_io/cs4218_tdm.c
+++ b/arch/ppc/8xx_io/cs4218_tdm.c
@@ -1379,7 +1379,6 @@
 }
 
 static DEFINE_TIMER(beep_timer, cs_nosound, 0, 0);
-};
 
 static void cs_mksound(unsigned int hz, unsigned int ticks)
 {
diff --git a/arch/ppc/lib/rheap.c b/arch/ppc/lib/rheap.c
index 31e5118..d407007 100644
--- a/arch/ppc/lib/rheap.c
+++ b/arch/ppc/lib/rheap.c
@@ -14,6 +14,7 @@
  */
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
 
@@ -654,7 +655,7 @@
 	int maxnr;
 	int i, nr;
 
-	maxnr = sizeof(st) / sizeof(st[0]);
+	maxnr = ARRAY_SIZE(st);
 
 	printk(KERN_INFO
 	       "info @0x%p (%d slots empty / %d max)\n",
diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c
index 5475709..ebb8c8f 100644
--- a/arch/ppc/syslib/m8260_pci_erratum9.c
+++ b/arch/ppc/syslib/m8260_pci_erratum9.c
@@ -105,7 +105,8 @@
 	idma_reg[IDMA_CHAN].idmr = 0;		/* mask all IDMA interrupts */
 	idma_reg[IDMA_CHAN].idsr = 0xff;	/* clear all event flags */
 
-	printk("<4>Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n",
+	printk(KERN_WARNING
+		"Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n",
 		IDMA_CHAN + 1);
 
 	return;
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
index d8d299b..01e48d8 100644
--- a/arch/ppc/syslib/m8xx_setup.c
+++ b/arch/ppc/syslib/m8xx_setup.c
@@ -77,7 +77,7 @@
 	}
 };
 
-#define mpc8xxads_part_num (sizeof (mpc8xxads_partitions) / sizeof (mpc8xxads_partitions[0]))
+#define mpc8xxads_part_num ARRAY_SIZE(mpc8xxads_partitions)
 
 #endif
 
diff --git a/arch/ppc/xmon/ppc-opc.c b/arch/ppc/xmon/ppc-opc.c
index 533a6c9..034313c 100644
--- a/arch/ppc/xmon/ppc-opc.c
+++ b/arch/ppc/xmon/ppc-opc.c
@@ -19,6 +19,7 @@
 Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 
 #include <linux/posix_types.h>
+#include <linux/kernel.h>
 #include "ansidecl.h"
 #include "ppc.h"
 
@@ -2669,8 +2670,7 @@
 
 };
 
-const int powerpc_num_opcodes =
-  sizeof (powerpc_opcodes) / sizeof (powerpc_opcodes[0]);
+const int powerpc_num_opcodes = ARRAY_SIZE(powerpc_opcodes);
 
 /* The macro table.  This is only used by the assembler.  */
 
@@ -2717,5 +2717,4 @@
 
 };
 
-const int powerpc_num_macros =
-  sizeof (powerpc_macros) / sizeof (powerpc_macros[0]);
+const int powerpc_num_macros = ARRAY_SIZE(powerpc_macros);
diff --git a/drivers/char/watchdog/booke_wdt.c b/drivers/char/watchdog/booke_wdt.c
index 4889022..0e23f29 100644
--- a/drivers/char/watchdog/booke_wdt.c
+++ b/drivers/char/watchdog/booke_wdt.c
@@ -35,7 +35,7 @@
 #ifdef	CONFIG_FSL_BOOKE
 #define WDT_PERIOD_DEFAULT 63	/* Ex. wdt_period=28 bus=333Mhz , reset=~40sec */
 #else
-#define WDT_PERIOD_DEFAULT 4	/* Refer to the PPC40x and PPC4xx manuals */
+#define WDT_PERIOD_DEFAULT 3	/* Refer to the PPC40x and PPC4xx manuals */
 #endif				/* for timing information */
 
 u32 booke_wdt_enabled = 0;
@@ -48,12 +48,22 @@
 #endif
 
 /*
+ * booke_wdt_ping:
+ */
+static __inline__ void booke_wdt_ping(void)
+{
+	mtspr(SPRN_TSR, TSR_ENW|TSR_WIS);
+}
+
+/*
  * booke_wdt_enable:
  */
 static __inline__ void booke_wdt_enable(void)
 {
 	u32 val;
 
+	/* clear status before enabling watchdog */
+	booke_wdt_ping();
 	val = mfspr(SPRN_TCR);
 	val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(booke_wdt_period));
 
@@ -61,14 +71,6 @@
 }
 
 /*
- * booke_wdt_ping:
- */
-static __inline__ void booke_wdt_ping(void)
-{
-	mtspr(SPRN_TSR, TSR_ENW|TSR_WIS);
-}
-
-/*
  * booke_wdt_write:
  */
 static ssize_t booke_wdt_write (struct file *file, const char __user *buf,
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index e947af9..94c117e 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -94,8 +94,6 @@
 	DBG("wf: thread started\n");
 
 	while(!kthread_should_stop()) {
-		try_to_freeze();
-
 		if (time_after_eq(jiffies, next)) {
 			wf_notify(WF_EVENT_TICK, NULL);
 			if (wf_overtemp) {
@@ -118,8 +116,8 @@
 		if (delay <= HZ)
 			schedule_timeout_interruptible(delay);
 
-		/* there should be no signal, but oh well */
-		if (signal_pending(current)) {
+		/* there should be no non-suspend signal, but oh well */
+		if (signal_pending(current) && !try_to_freeze()) {
 			printk(KERN_WARNING "windfarm: thread got sigl !\n");
 			break;
 		}
diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h
index abba808..3671c12 100644
--- a/include/asm-powerpc/firmware.h
+++ b/include/asm-powerpc/firmware.h
@@ -44,6 +44,7 @@
 #define FW_FEATURE_LPAR		ASM_CONST(0x0000000000400000)
 #define FW_FEATURE_PS3_LV1	ASM_CONST(0x0000000000800000)
 #define FW_FEATURE_BEAT		ASM_CONST(0x0000000001000000)
+#define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000002000000)
 
 #ifndef __ASSEMBLY__
 
diff --git a/include/asm-powerpc/kprobes.h b/include/asm-powerpc/kprobes.h
index 2dafa37..3a5dd49 100644
--- a/include/asm-powerpc/kprobes.h
+++ b/include/asm-powerpc/kprobes.h
@@ -44,6 +44,7 @@
 #define IS_TDI(instr)		(((instr) & 0xfc000000) == 0x08000000)
 #define IS_TWI(instr)		(((instr) & 0xfc000000) == 0x0c000000)
 
+#ifdef CONFIG_PPC64
 /*
  * 64bit powerpc uses function descriptors.
  * Handle cases where:
@@ -67,9 +68,13 @@
 }
 
 #define JPROBE_ENTRY(pentry)	(kprobe_opcode_t *)((func_descr_t *)pentry)
-
 #define is_trap(instr)	(IS_TW(instr) || IS_TD(instr) || \
 			IS_TWI(instr) || IS_TDI(instr))
+#else
+/* Use stock kprobe_lookup_name since ppc32 doesn't use function descriptors */
+#define JPROBE_ENTRY(pentry)	(kprobe_opcode_t *)(pentry)
+#define is_trap(instr)	(IS_TW(instr) || IS_TWI(instr))
+#endif
 
 #define ARCH_SUPPORTS_KRETPROBES
 #define  ARCH_INACTIVE_KPROBE_COUNT 1
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
index 4560d72..7afd5bf 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/include/asm-powerpc/mpc52xx.h
@@ -249,6 +249,8 @@
 extern void mpc52xx_init_irq(void);
 extern unsigned int mpc52xx_get_irq(void);
 
+extern int __init mpc52xx_add_bridge(struct device_node *node);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __ASM_POWERPC_MPC52xx_H__ */
diff --git a/include/asm-powerpc/sstep.h b/include/asm-powerpc/sstep.h
index 630a988..f593b0f 100644
--- a/include/asm-powerpc/sstep.h
+++ b/include/asm-powerpc/sstep.h
@@ -21,6 +21,7 @@
  */
 #define IS_MTMSRD(instr)	(((instr) & 0xfc0007be) == 0x7c000124)
 #define IS_RFID(instr)		(((instr) & 0xfc0007fe) == 0x4c000024)
+#define IS_RFI(instr)		(((instr) & 0xfc0007fe) == 0x4c000064)
 
 /* Emulate instructions that cause a transfer of control. */
 extern int emulate_step(struct pt_regs *regs, unsigned int instr);