include/asm-arm/arch-sa1100/irqs.h - kernel/msm - Gitiles

 /*
  * linux/include/asm-arm/arch-sa1100/irqs.h
  *
  * Copyright (C) 1996 Russell King
  * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
  * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
  *
  * 2001/11/14	RMK	Cleaned up and standardised a lot of the IRQs.
  */

 #define	IRQ_GPIO0		0
 #define	IRQ_GPIO1		1
 #define	IRQ_GPIO2		2
 #define	IRQ_GPIO3		3
 #define	IRQ_GPIO4		4
 #define	IRQ_GPIO5		5
 #define	IRQ_GPIO6		6
 #define	IRQ_GPIO7		7
 #define	IRQ_GPIO8		8
 #define	IRQ_GPIO9		9
 #define	IRQ_GPIO10		10
 #define	IRQ_GPIO11_27		11
 #define	IRQ_LCD  		12	/* LCD controller           */
 #define	IRQ_Ser0UDC		13	/* Ser. port 0 UDC          */
 #define	IRQ_Ser1SDLC		14	/* Ser. port 1 SDLC         */
 #define	IRQ_Ser1UART		15	/* Ser. port 1 UART         */
 #define	IRQ_Ser2ICP		16	/* Ser. port 2 ICP          */
 #define	IRQ_Ser3UART		17	/* Ser. port 3 UART         */
 #define	IRQ_Ser4MCP		18	/* Ser. port 4 MCP          */
 #define	IRQ_Ser4SSP		19	/* Ser. port 4 SSP          */
 #define	IRQ_DMA0 		20	/* DMA controller channel 0 */
 #define	IRQ_DMA1 		21	/* DMA controller channel 1 */
 #define	IRQ_DMA2 		22	/* DMA controller channel 2 */
 #define	IRQ_DMA3 		23	/* DMA controller channel 3 */
 #define	IRQ_DMA4 		24	/* DMA controller channel 4 */
 #define	IRQ_DMA5 		25	/* DMA controller channel 5 */
 #define	IRQ_OST0 		26	/* OS Timer match 0         */
 #define	IRQ_OST1 		27	/* OS Timer match 1         */
 #define	IRQ_OST2 		28	/* OS Timer match 2         */
 #define	IRQ_OST3 		29	/* OS Timer match 3         */
 #define	IRQ_RTC1Hz		30	/* RTC 1 Hz clock           */
 #define	IRQ_RTCAlrm		31	/* RTC Alarm                */

 #define	IRQ_GPIO11		32
 #define	IRQ_GPIO12		33
 #define	IRQ_GPIO13		34
 #define	IRQ_GPIO14		35
 #define	IRQ_GPIO15		36
 #define	IRQ_GPIO16		37
 #define	IRQ_GPIO17		38
 #define	IRQ_GPIO18		39
 #define	IRQ_GPIO19		40
 #define	IRQ_GPIO20		41
 #define	IRQ_GPIO21		42
 #define	IRQ_GPIO22		43
 #define	IRQ_GPIO23		44
 #define	IRQ_GPIO24		45
 #define	IRQ_GPIO25		46
 #define	IRQ_GPIO26		47
 #define	IRQ_GPIO27		48

 /*
  * The next 16 interrupts are for board specific purposes.  Since
  * the kernel can only run on one machine at a time, we can re-use
  * these.  If you need more, increase IRQ_BOARD_END, but keep it
  * within sensible limits.  IRQs 49 to 64 are available.
  */
 #define IRQ_BOARD_START		49
 #define IRQ_BOARD_END		65

 #define IRQ_SA1111_START	(IRQ_BOARD_END)
 #define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
 #define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
 #define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
 #define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
 #define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
 #define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
 #define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
 #define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
 #define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
 #define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
 #define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
 #define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
 #define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
 #define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
 #define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
 #define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
 #define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
 #define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
 #define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
 #define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
 #define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
 #define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
 #define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
 #define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
 #define SSPXMTINT		(IRQ_BOARD_END + 24)
 #define SSPRCVINT		(IRQ_BOARD_END + 25)
 #define SSPROR			(IRQ_BOARD_END + 26)
 #define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
 #define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
 #define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
 #define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
 #define AUDTFSR			(IRQ_BOARD_END + 36)
 #define AUDRFSR			(IRQ_BOARD_END + 37)
 #define AUDTUR			(IRQ_BOARD_END + 38)
 #define AUDROR			(IRQ_BOARD_END + 39)
 #define AUDDTS			(IRQ_BOARD_END + 40)
 #define AUDRDD			(IRQ_BOARD_END + 41)
 #define AUDSTO			(IRQ_BOARD_END + 42)
 #define IRQ_USBPWR		(IRQ_BOARD_END + 43)
 #define IRQ_HCIM		(IRQ_BOARD_END + 44)
 #define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
 #define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
 #define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
 #define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
 #define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
 #define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
 #define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
 #define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
 #define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
 #define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)

 #define IRQ_LOCOMO_START	(IRQ_BOARD_END)
 #define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
 #define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
 #define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
 #define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
 #define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
 #define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
 #define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
 #define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
 #define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
 #define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
 #define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
 #define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
 #define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
 #define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
 #define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
 #define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
 #define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
 #define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
 #define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
 #define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
 #define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
 #define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)

 /*
  * Figure out the MAX IRQ number.
  *
  * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
  * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
  * Otherwise, we have the standard IRQs only.
  */
 #ifdef CONFIG_SA1111
 #define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
 #elif defined(CONFIG_SA1100_H3800)
 #define NR_IRQS			(IRQ_BOARD_END)
 #elif defined(CONFIG_SHARP_LOCOMO)
 #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
 #endif

 /*
  * Board specific IRQs.  Define them here.
  * Do not surround them with ifdefs.
  */
 #define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
 #define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
 #define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)

 /* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
 #define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
 #define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
 #define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
 #define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)

 /* H3800-specific IRQs (CONFIG_SA1100_H3800) */
 #define H3800_KPIO_IRQ_START    (IRQ_BOARD_START)
 #define IRQ_H3800_KEY           (IRQ_BOARD_START + 0)
 #define IRQ_H3800_SPI           (IRQ_BOARD_START + 1)
 #define IRQ_H3800_OWM           (IRQ_BOARD_START + 2)
 #define IRQ_H3800_ADC           (IRQ_BOARD_START + 3)
 #define IRQ_H3800_UART_0        (IRQ_BOARD_START + 4)
 #define IRQ_H3800_UART_1        (IRQ_BOARD_START + 5)
 #define IRQ_H3800_TIMER_0       (IRQ_BOARD_START + 6)
 #define IRQ_H3800_TIMER_1       (IRQ_BOARD_START + 7)
 #define IRQ_H3800_TIMER_2       (IRQ_BOARD_START + 8)
 #define H3800_KPIO_IRQ_COUNT    9

 #define H3800_GPIO_IRQ_START    (IRQ_BOARD_START + 9)
 #define IRQ_H3800_PEN           (IRQ_BOARD_START + 9)
 #define IRQ_H3800_SD_DETECT     (IRQ_BOARD_START + 10)
 #define IRQ_H3800_EAR_IN        (IRQ_BOARD_START + 11)
 #define IRQ_H3800_USB_DETECT    (IRQ_BOARD_START + 12)
 #define IRQ_H3800_SD_CON_SLT    (IRQ_BOARD_START + 13)
 #define H3800_GPIO_IRQ_COUNT    5
	/*
	* linux/include/asm-arm/arch-sa1100/irqs.h
	*
	* Copyright (C) 1996 Russell King
	* Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
	* Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
	*
	* 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs.
	*/

	#define IRQ_GPIO0 0
	#define IRQ_GPIO1 1
	#define IRQ_GPIO2 2
	#define IRQ_GPIO3 3
	#define IRQ_GPIO4 4
	#define IRQ_GPIO5 5
	#define IRQ_GPIO6 6
	#define IRQ_GPIO7 7
	#define IRQ_GPIO8 8
	#define IRQ_GPIO9 9
	#define IRQ_GPIO10 10
	#define IRQ_GPIO11_27 11
	#define IRQ_LCD 12 /* LCD controller */
	#define IRQ_Ser0UDC 13 /* Ser. port 0 UDC */
	#define IRQ_Ser1SDLC 14 /* Ser. port 1 SDLC */
	#define IRQ_Ser1UART 15 /* Ser. port 1 UART */
	#define IRQ_Ser2ICP 16 /* Ser. port 2 ICP */
	#define IRQ_Ser3UART 17 /* Ser. port 3 UART */
	#define IRQ_Ser4MCP 18 /* Ser. port 4 MCP */
	#define IRQ_Ser4SSP 19 /* Ser. port 4 SSP */
	#define IRQ_DMA0 20 /* DMA controller channel 0 */
	#define IRQ_DMA1 21 /* DMA controller channel 1 */
	#define IRQ_DMA2 22 /* DMA controller channel 2 */
	#define IRQ_DMA3 23 /* DMA controller channel 3 */
	#define IRQ_DMA4 24 /* DMA controller channel 4 */
	#define IRQ_DMA5 25 /* DMA controller channel 5 */
	#define IRQ_OST0 26 /* OS Timer match 0 */
	#define IRQ_OST1 27 /* OS Timer match 1 */
	#define IRQ_OST2 28 /* OS Timer match 2 */
	#define IRQ_OST3 29 /* OS Timer match 3 */
	#define IRQ_RTC1Hz 30 /* RTC 1 Hz clock */
	#define IRQ_RTCAlrm 31 /* RTC Alarm */

	#define IRQ_GPIO11 32
	#define IRQ_GPIO12 33
	#define IRQ_GPIO13 34
	#define IRQ_GPIO14 35
	#define IRQ_GPIO15 36
	#define IRQ_GPIO16 37
	#define IRQ_GPIO17 38
	#define IRQ_GPIO18 39
	#define IRQ_GPIO19 40
	#define IRQ_GPIO20 41
	#define IRQ_GPIO21 42
	#define IRQ_GPIO22 43
	#define IRQ_GPIO23 44
	#define IRQ_GPIO24 45
	#define IRQ_GPIO25 46
	#define IRQ_GPIO26 47
	#define IRQ_GPIO27 48

	/*
	* The next 16 interrupts are for board specific purposes. Since
	* the kernel can only run on one machine at a time, we can re-use
	* these. If you need more, increase IRQ_BOARD_END, but keep it
	* within sensible limits. IRQs 49 to 64 are available.
	*/
	#define IRQ_BOARD_START 49
	#define IRQ_BOARD_END 65

	#define IRQ_SA1111_START (IRQ_BOARD_END)
	#define IRQ_GPAIN0 (IRQ_BOARD_END + 0)
	#define IRQ_GPAIN1 (IRQ_BOARD_END + 1)
	#define IRQ_GPAIN2 (IRQ_BOARD_END + 2)
	#define IRQ_GPAIN3 (IRQ_BOARD_END + 3)
	#define IRQ_GPBIN0 (IRQ_BOARD_END + 4)
	#define IRQ_GPBIN1 (IRQ_BOARD_END + 5)
	#define IRQ_GPBIN2 (IRQ_BOARD_END + 6)
	#define IRQ_GPBIN3 (IRQ_BOARD_END + 7)
	#define IRQ_GPBIN4 (IRQ_BOARD_END + 8)
	#define IRQ_GPBIN5 (IRQ_BOARD_END + 9)
	#define IRQ_GPCIN0 (IRQ_BOARD_END + 10)
	#define IRQ_GPCIN1 (IRQ_BOARD_END + 11)
	#define IRQ_GPCIN2 (IRQ_BOARD_END + 12)
	#define IRQ_GPCIN3 (IRQ_BOARD_END + 13)
	#define IRQ_GPCIN4 (IRQ_BOARD_END + 14)
	#define IRQ_GPCIN5 (IRQ_BOARD_END + 15)
	#define IRQ_GPCIN6 (IRQ_BOARD_END + 16)
	#define IRQ_GPCIN7 (IRQ_BOARD_END + 17)
	#define IRQ_MSTXINT (IRQ_BOARD_END + 18)
	#define IRQ_MSRXINT (IRQ_BOARD_END + 19)
	#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20)
	#define IRQ_TPTXINT (IRQ_BOARD_END + 21)
	#define IRQ_TPRXINT (IRQ_BOARD_END + 22)
	#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23)
	#define SSPXMTINT (IRQ_BOARD_END + 24)
	#define SSPRCVINT (IRQ_BOARD_END + 25)
	#define SSPROR (IRQ_BOARD_END + 26)
	#define AUDXMTDMADONEA (IRQ_BOARD_END + 32)
	#define AUDRCVDMADONEA (IRQ_BOARD_END + 33)
	#define AUDXMTDMADONEB (IRQ_BOARD_END + 34)
	#define AUDRCVDMADONEB (IRQ_BOARD_END + 35)
	#define AUDTFSR (IRQ_BOARD_END + 36)
	#define AUDRFSR (IRQ_BOARD_END + 37)
	#define AUDTUR (IRQ_BOARD_END + 38)
	#define AUDROR (IRQ_BOARD_END + 39)
	#define AUDDTS (IRQ_BOARD_END + 40)
	#define AUDRDD (IRQ_BOARD_END + 41)
	#define AUDSTO (IRQ_BOARD_END + 42)
	#define IRQ_USBPWR (IRQ_BOARD_END + 43)
	#define IRQ_HCIM (IRQ_BOARD_END + 44)
	#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45)
	#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46)
	#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47)
	#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48)
	#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49)
	#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50)
	#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51)
	#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52)
	#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53)
	#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54)

	#define IRQ_LOCOMO_START (IRQ_BOARD_END)
	#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0)
	#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1)
	#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2)
	#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3)
	#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4)
	#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5)
	#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6)
	#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7)
	#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8)
	#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9)
	#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10)
	#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11)
	#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12)
	#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13)
	#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14)
	#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15)
	#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16)
	#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
	#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
	#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
	#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20)
	#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)

	/*
	* Figure out the MAX IRQ number.
	*
	* If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
	* If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
	* Otherwise, we have the standard IRQs only.
	*/
	#ifdef CONFIG_SA1111
	#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
	#elif defined(CONFIG_SA1100_H3800)
	#define NR_IRQS (IRQ_BOARD_END)
	#elif defined(CONFIG_SHARP_LOCOMO)
	#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
	#else
	#define NR_IRQS (IRQ_BOARD_START)
	#endif

	/*
	* Board specific IRQs. Define them here.
	* Do not surround them with ifdefs.
	*/
	#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0)
	#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1)
	#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2)

	/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
	#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0)
	#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
	#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
	#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)

	/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
	#define H3800_KPIO_IRQ_START (IRQ_BOARD_START)
	#define IRQ_H3800_KEY (IRQ_BOARD_START + 0)
	#define IRQ_H3800_SPI (IRQ_BOARD_START + 1)
	#define IRQ_H3800_OWM (IRQ_BOARD_START + 2)
	#define IRQ_H3800_ADC (IRQ_BOARD_START + 3)
	#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4)
	#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5)
	#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6)
	#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7)
	#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8)
	#define H3800_KPIO_IRQ_COUNT 9

	#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9)
	#define IRQ_H3800_PEN (IRQ_BOARD_START + 9)
	#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10)
	#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11)
	#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12)
	#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13)
	#define H3800_GPIO_IRQ_COUNT 5