amd64_edac: enhance address to DRAM bank mapping
Add cs mode to cs size mapping tables for DDR2 and DDR3 and F10
and all K8 flavors and remove klugdy table of pseudo values. Add a
low_ops->dbam_to_cs member which is family-specific and replaces
low_ops->dbam_map_to_pages since the pages calculation is a one liner
now.
Further cleanups, while at it:
- shorten family name defines
- align amd64_family_types struct members
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index ed9b07a..7e67054 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -19,26 +19,48 @@
static struct amd64_pvt *pvt_lookup[EDAC_MAX_NUMNODES];
/*
- * See F2x80 for K8 and F2x[1,0]80 for Fam10 and later. The table below is only
- * for DDR2 DRAM mapping.
+ * Address to DRAM bank mapping: see F2x80 for K8 and F2x[1,0]80 for Fam10 and
+ * later.
*/
-u32 revf_quad_ddr2_shift[] = {
- 0, /* 0000b NULL DIMM (128mb) */
- 28, /* 0001b 256mb */
- 29, /* 0010b 512mb */
- 29, /* 0011b 512mb */
- 29, /* 0100b 512mb */
- 30, /* 0101b 1gb */
- 30, /* 0110b 1gb */
- 31, /* 0111b 2gb */
- 31, /* 1000b 2gb */
- 32, /* 1001b 4gb */
- 32, /* 1010b 4gb */
- 33, /* 1011b 8gb */
- 0, /* 1100b future */
- 0, /* 1101b future */
- 0, /* 1110b future */
- 0 /* 1111b future */
+static int ddr2_dbam_revCG[] = {
+ [0] = 32,
+ [1] = 64,
+ [2] = 128,
+ [3] = 256,
+ [4] = 512,
+ [5] = 1024,
+ [6] = 2048,
+};
+
+static int ddr2_dbam_revD[] = {
+ [0] = 32,
+ [1] = 64,
+ [2 ... 3] = 128,
+ [4] = 256,
+ [5] = 512,
+ [6] = 256,
+ [7] = 512,
+ [8 ... 9] = 1024,
+ [10] = 2048,
+};
+
+static int ddr2_dbam[] = { [0] = 128,
+ [1] = 256,
+ [2 ... 4] = 512,
+ [5 ... 6] = 1024,
+ [7 ... 8] = 2048,
+ [9 ... 10] = 4096,
+ [11] = 8192,
+};
+
+static int ddr3_dbam[] = { [0] = -1,
+ [1] = 256,
+ [2] = 512,
+ [3 ... 4] = -1,
+ [5 ... 6] = 1024,
+ [7 ... 8] = 2048,
+ [9 ... 10] = 4096,
+ [11] = 8192,
};
/*
@@ -187,7 +209,7 @@
/* Map from a CSROW entry to the mask entry that operates on it */
static inline u32 amd64_map_to_dcs_mask(struct amd64_pvt *pvt, int csrow)
{
- if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F)
+ if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F)
return csrow;
else
return csrow >> 1;
@@ -435,7 +457,7 @@
u64 base;
/* only revE and later have the DRAM Hole Address Register */
- if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_E) {
+ if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_E) {
debugf1(" revision %d for node %d does not support DHAR\n",
pvt->ext_model, pvt->mc_node_id);
return 1;
@@ -795,7 +817,7 @@
edac_printk(KERN_DEBUG, EDAC_MC, "F10h CPU detected\n");
else if (boot_cpu_data.x86 == 0xf)
edac_printk(KERN_DEBUG, EDAC_MC, "%s detected\n",
- (pvt->ext_model >= OPTERON_CPU_REV_F) ?
+ (pvt->ext_model >= K8_REV_F) ?
"Rev F or later" : "Rev E or earlier");
else
/* we'll hardly ever ever get here */
@@ -811,7 +833,7 @@
int bit;
enum dev_type edac_cap = EDAC_FLAG_NONE;
- bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F)
+ bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= K8_REV_F)
? 19
: 17;
@@ -936,7 +958,7 @@
static void amd64_set_dct_base_and_mask(struct amd64_pvt *pvt)
{
- if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F) {
+ if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F) {
pvt->dcsb_base = REV_E_DCSB_BASE_BITS;
pvt->dcsm_mask = REV_E_DCSM_MASK_BITS;
pvt->dcs_mask_notused = REV_E_DCS_NOTUSED_BITS;
@@ -1009,7 +1031,7 @@
{
enum mem_type type;
- if (boot_cpu_data.x86 >= 0x10 || pvt->ext_model >= OPTERON_CPU_REV_F) {
+ if (boot_cpu_data.x86 >= 0x10 || pvt->ext_model >= K8_REV_F) {
/* Rev F and later */
type = (pvt->dclr0 & BIT(16)) ? MEM_DDR2 : MEM_RDDR2;
} else {
@@ -1042,7 +1064,7 @@
if (err)
return err;
- if ((boot_cpu_data.x86_model >> 4) >= OPTERON_CPU_REV_F) {
+ if ((boot_cpu_data.x86_model >> 4) >= K8_REV_F) {
/* RevF (NPT) and later */
flag = pvt->dclr0 & F10_WIDTH_128;
} else {
@@ -1158,36 +1180,18 @@
}
}
-/*
- * determrine the number of PAGES in for this DIMM's size based on its DRAM
- * Address Mapping.
- *
- * First step is to calc the number of bits to shift a value of 1 left to
- * indicate show many pages. Start with the DBAM value as the starting bits,
- * then proceed to adjust those shift bits, based on CPU rev and the table.
- * See BKDG on the DBAM
- */
-static int k8_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map)
+static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, int cs_mode)
{
- int nr_pages;
+ int *dbam_map;
- if (pvt->ext_model >= OPTERON_CPU_REV_F) {
- nr_pages = 1 << (revf_quad_ddr2_shift[dram_map] - PAGE_SHIFT);
- } else {
- /*
- * RevE and less section; this line is tricky. It collapses the
- * table used by RevD and later to one that matches revisions CG
- * and earlier.
- */
- dram_map -= (pvt->ext_model >= OPTERON_CPU_REV_D) ?
- (dram_map > 8 ? 4 : (dram_map > 5 ?
- 3 : (dram_map > 2 ? 1 : 0))) : 0;
+ if (pvt->ext_model >= K8_REV_F)
+ dbam_map = ddr2_dbam;
+ else if (pvt->ext_model >= K8_REV_D)
+ dbam_map = ddr2_dbam_revD;
+ else
+ dbam_map = ddr2_dbam_revCG;
- /* 25 shift is 32MiB minimum DIMM size in RevE and prior */
- nr_pages = 1 << (dram_map + 25 - PAGE_SHIFT);
- }
-
- return nr_pages;
+ return dbam_map[cs_mode];
}
/*
@@ -1249,9 +1253,16 @@
}
-static int f10_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map)
+static int f10_dbam_to_chip_select(struct amd64_pvt *pvt, int cs_mode)
{
- return 1 << (revf_quad_ddr2_shift[dram_map] - PAGE_SHIFT);
+ int *dbam_map;
+
+ if (pvt->dchr0 & DDR3_MODE || pvt->dchr1 & DDR3_MODE)
+ dbam_map = ddr3_dbam;
+ else
+ dbam_map = ddr2_dbam;
+
+ return dbam_map[cs_mode];
}
/* Enable extended configuration access via 0xCF8 feature */
@@ -1706,23 +1717,6 @@
}
/*
- * Input (@index) is the DBAM DIMM value (1 of 4) used as an index into a shift
- * table (revf_quad_ddr2_shift) which starts at 128MB DIMM size. Index of 0
- * indicates an empty DIMM slot, as reported by Hardware on empty slots.
- *
- * Normalize to 128MB by subracting 27 bit shift.
- */
-static int map_dbam_to_csrow_size(int index)
-{
- int mega_bytes = 0;
-
- if (index > 0 && index <= DBAM_MAX_VALUE)
- mega_bytes = ((128 << (revf_quad_ddr2_shift[index]-27)));
-
- return mega_bytes;
-}
-
-/*
* debug routine to display the memory sizes of all logical DIMMs and its
* CSROWs as well
*/
@@ -1734,7 +1728,7 @@
if (boot_cpu_data.x86 == 0xf) {
/* K8 families < revF not supported yet */
- if (pvt->ext_model < OPTERON_CPU_REV_F)
+ if (pvt->ext_model < K8_REV_F)
return;
else
WARN_ON(ctrl != 0);
@@ -1753,11 +1747,11 @@
size0 = 0;
if (dcsb[dimm*2] & K8_DCSB_CS_ENABLE)
- size0 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam));
+ size0 = pvt->ops->dbam_to_cs(pvt, DBAM_DIMM(dimm, dbam));
size1 = 0;
if (dcsb[dimm*2 + 1] & K8_DCSB_CS_ENABLE)
- size1 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam));
+ size1 = pvt->ops->dbam_to_cs(pvt, DBAM_DIMM(dimm, dbam));
edac_printk(KERN_DEBUG, EDAC_MC, " %d: %5dMB %d: %5dMB\n",
dimm * 2, size0, dimm * 2 + 1, size1);
@@ -1780,8 +1774,8 @@
* If we are on a DDR3 machine, we don't know yet if
* we support that properly at this time
*/
- if ((pvt->dchr0 & F10_DCHR_Ddr3Mode) ||
- (pvt->dchr1 & F10_DCHR_Ddr3Mode)) {
+ if ((pvt->dchr0 & DDR3_MODE) ||
+ (pvt->dchr1 & DDR3_MODE)) {
amd64_printk(KERN_WARNING,
"%s() This machine is running with DDR3 memory. "
@@ -1817,11 +1811,11 @@
.addr_f1_ctl = PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
.misc_f3_ctl = PCI_DEVICE_ID_AMD_K8_NB_MISC,
.ops = {
- .early_channel_count = k8_early_channel_count,
- .get_error_address = k8_get_error_address,
- .read_dram_base_limit = k8_read_dram_base_limit,
- .map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow,
- .dbam_map_to_pages = k8_dbam_map_to_pages,
+ .early_channel_count = k8_early_channel_count,
+ .get_error_address = k8_get_error_address,
+ .read_dram_base_limit = k8_read_dram_base_limit,
+ .map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow,
+ .dbam_to_cs = k8_dbam_to_chip_select,
}
},
[F10_CPUS] = {
@@ -1829,13 +1823,13 @@
.addr_f1_ctl = PCI_DEVICE_ID_AMD_10H_NB_MAP,
.misc_f3_ctl = PCI_DEVICE_ID_AMD_10H_NB_MISC,
.ops = {
- .probe_valid_hardware = f10_probe_valid_hardware,
- .early_channel_count = f10_early_channel_count,
- .get_error_address = f10_get_error_address,
- .read_dram_base_limit = f10_read_dram_base_limit,
- .read_dram_ctl_register = f10_read_dram_ctl_register,
- .map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow,
- .dbam_map_to_pages = f10_dbam_map_to_pages,
+ .probe_valid_hardware = f10_probe_valid_hardware,
+ .early_channel_count = f10_early_channel_count,
+ .get_error_address = f10_get_error_address,
+ .read_dram_base_limit = f10_read_dram_base_limit,
+ .read_dram_ctl_register = f10_read_dram_ctl_register,
+ .map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow,
+ .dbam_to_cs = f10_dbam_to_chip_select,
}
},
[F11_CPUS] = {
@@ -1843,13 +1837,13 @@
.addr_f1_ctl = PCI_DEVICE_ID_AMD_11H_NB_MAP,
.misc_f3_ctl = PCI_DEVICE_ID_AMD_11H_NB_MISC,
.ops = {
- .probe_valid_hardware = f10_probe_valid_hardware,
- .early_channel_count = f10_early_channel_count,
- .get_error_address = f10_get_error_address,
- .read_dram_base_limit = f10_read_dram_base_limit,
- .read_dram_ctl_register = f10_read_dram_ctl_register,
- .map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow,
- .dbam_map_to_pages = f10_dbam_map_to_pages,
+ .probe_valid_hardware = f10_probe_valid_hardware,
+ .early_channel_count = f10_early_channel_count,
+ .get_error_address = f10_get_error_address,
+ .read_dram_base_limit = f10_read_dram_base_limit,
+ .read_dram_ctl_register = f10_read_dram_ctl_register,
+ .map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow,
+ .dbam_to_cs = f10_dbam_to_chip_select,
}
},
};
@@ -2425,7 +2419,7 @@
*/
static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt)
{
- u32 dram_map, nr_pages;
+ u32 cs_mode, nr_pages;
/*
* The math on this doesn't look right on the surface because x/2*4 can
@@ -2434,9 +2428,9 @@
* number of bits to shift the DBAM register to extract the proper CSROW
* field.
*/
- dram_map = (pvt->dbam0 >> ((csrow_nr / 2) * 4)) & 0xF;
+ cs_mode = (pvt->dbam0 >> ((csrow_nr / 2) * 4)) & 0xF;
- nr_pages = pvt->ops->dbam_map_to_pages(pvt, dram_map);
+ nr_pages = pvt->ops->dbam_to_cs(pvt, cs_mode) << (20 - PAGE_SHIFT);
/*
* If dual channel then double the memory size of single channel.
@@ -2444,7 +2438,7 @@
*/
nr_pages <<= (pvt->channel_count - 1);
- debugf0(" (csrow=%d) DBAM map index= %d\n", csrow_nr, dram_map);
+ debugf0(" (csrow=%d) DBAM map index= %d\n", csrow_nr, cs_mode);
debugf0(" nr_pages= %u channel-count = %d\n",
nr_pages, pvt->channel_count);
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 24e2804..f8c187e 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -135,13 +135,9 @@
#define EDAC_MAX_NUMNODES 8
/* Extended Model from CPUID, for CPU Revision numbers */
-#define OPTERON_CPU_LE_REV_C 0
-#define OPTERON_CPU_REV_D 1
-#define OPTERON_CPU_REV_E 2
-
-/* NPT processors have the following Extended Models */
-#define OPTERON_CPU_REV_F 4
-#define OPTERON_CPU_REV_FA 5
+#define K8_REV_D 1
+#define K8_REV_E 2
+#define K8_REV_F 4
/* Hardware limit on ChipSelect rows per MC and processors per system */
#define MAX_CS_COUNT 8
@@ -243,7 +239,7 @@
#define F10_DCHR_1 0x194
#define F10_DCHR_FOUR_RANK_DIMM BIT(18)
-#define F10_DCHR_Ddr3Mode BIT(8)
+#define DDR3_MODE BIT(8)
#define F10_DCHR_MblMode BIT(6)
@@ -501,7 +497,6 @@
};
extern struct scrubrate scrubrates[23];
-extern u32 revf_quad_ddr2_shift[16];
extern const char *tt_msgs[4];
extern const char *ll_msgs[4];
extern const char *rrrr_msgs[16];
@@ -531,17 +526,16 @@
* functions and per device encoding/decoding logic.
*/
struct low_ops {
- int (*probe_valid_hardware)(struct amd64_pvt *pvt);
- int (*early_channel_count)(struct amd64_pvt *pvt);
+ int (*probe_valid_hardware) (struct amd64_pvt *pvt);
+ int (*early_channel_count) (struct amd64_pvt *pvt);
- u64 (*get_error_address)(struct mem_ctl_info *mci,
- struct err_regs *info);
- void (*read_dram_base_limit)(struct amd64_pvt *pvt, int dram);
- void (*read_dram_ctl_register)(struct amd64_pvt *pvt);
- void (*map_sysaddr_to_csrow)(struct mem_ctl_info *mci,
- struct err_regs *info,
- u64 SystemAddr);
- int (*dbam_map_to_pages)(struct amd64_pvt *pvt, int dram_map);
+ u64 (*get_error_address) (struct mem_ctl_info *mci,
+ struct err_regs *info);
+ void (*read_dram_base_limit) (struct amd64_pvt *pvt, int dram);
+ void (*read_dram_ctl_register) (struct amd64_pvt *pvt);
+ void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci,
+ struct err_regs *info, u64 SystemAddr);
+ int (*dbam_to_cs) (struct amd64_pvt *pvt, int cs_mode);
};
struct amd64_family_type {