Automatic merge of /spare/repo/netdev-2.6 branch hdlc
diff --git a/CREDITS b/CREDITS
index 3b9e160..9bd099d 100644
--- a/CREDITS
+++ b/CREDITS
@@ -882,13 +882,12 @@
S: USA
N: Randy Dunlap
-E: rddunlap@osdl.org
+E: rdunlap@xenotime.net
W: http://www.xenotime.net/linux/linux.html
W: http://www.linux-usb.org
D: Linux-USB subsystem, USB core/UHCI/printer/storage drivers
D: x86 SMP, ACPI, bootflag hacking
-S: 12725 SW Millikan Way, Suite 400
-S: Beaverton, Oregon 97005
+S: (ask for current address)
S: USA
N: Bob Dunlop
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index cf2fce7..6df1dfd 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -14,7 +14,7 @@
</authorgroup>
<copyright>
- <year>2003</year>
+ <year>2003-2005</year>
<holder>Jeff Garzik</holder>
</copyright>
@@ -44,30 +44,38 @@
<toc></toc>
- <chapter id="libataThanks">
- <title>Thanks</title>
+ <chapter id="libataIntroduction">
+ <title>Introduction</title>
<para>
- The bulk of the ATA knowledge comes thanks to long conversations with
- Andre Hedrick (www.linux-ide.org).
+ libATA is a library used inside the Linux kernel to support ATA host
+ controllers and devices. libATA provides an ATA driver API, class
+ transports for ATA and ATAPI devices, and SCSI<->ATA translation
+ for ATA devices according to the T10 SAT specification.
</para>
<para>
- Thanks to Alan Cox for pointing out similarities
- between SATA and SCSI, and in general for motivation to hack on
- libata.
- </para>
- <para>
- libata's device detection
- method, ata_pio_devchk, and in general all the early probing was
- based on extensive study of Hale Landis's probe/reset code in his
- ATADRVR driver (www.ata-atapi.com).
+ This Guide documents the libATA driver API, library functions, library
+ internals, and a couple sample ATA low-level drivers.
</para>
</chapter>
<chapter id="libataDriverApi">
<title>libata Driver API</title>
+ <para>
+ struct ata_port_operations is defined for every low-level libata
+ hardware driver, and it controls how the low-level driver
+ interfaces with the ATA and SCSI layers.
+ </para>
+ <para>
+ FIS-based drivers will hook into the system with ->qc_prep() and
+ ->qc_issue() high-level hooks. Hardware which behaves in a manner
+ similar to PCI IDE hardware may utilize several generic helpers,
+ defining at a bare minimum the bus I/O addresses of the ATA shadow
+ register blocks.
+ </para>
<sect1>
<title>struct ata_port_operations</title>
+ <sect2><title>Disable ATA port</title>
<programlisting>
void (*port_disable) (struct ata_port *);
</programlisting>
@@ -78,6 +86,9 @@
unplug).
</para>
+ </sect2>
+
+ <sect2><title>Post-IDENTIFY device configuration</title>
<programlisting>
void (*dev_config) (struct ata_port *, struct ata_device *);
</programlisting>
@@ -88,6 +99,9 @@
issue of SET FEATURES - XFER MODE, and prior to operation.
</para>
+ </sect2>
+
+ <sect2><title>Set PIO/DMA mode</title>
<programlisting>
void (*set_piomode) (struct ata_port *, struct ata_device *);
void (*set_dmamode) (struct ata_port *, struct ata_device *);
@@ -108,6 +122,9 @@
->set_dma_mode() is only called if DMA is possible.
</para>
+ </sect2>
+
+ <sect2><title>Taskfile read/write</title>
<programlisting>
void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
@@ -120,6 +137,9 @@
taskfile register values.
</para>
+ </sect2>
+
+ <sect2><title>ATA command execute</title>
<programlisting>
void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
@@ -129,17 +149,37 @@
->tf_load(), to be initiated in hardware.
</para>
+ </sect2>
+
+ <sect2><title>Per-cmd ATAPI DMA capabilities filter</title>
<programlisting>
-u8 (*check_status)(struct ata_port *ap);
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+int (*check_atapi_dma) (struct ata_queued_cmd *qc);
</programlisting>
<para>
- Reads the Status ATA shadow register from hardware. On some
- hardware, this has the side effect of clearing the interrupt
- condition.
+Allow low-level driver to filter ATA PACKET commands, returning a status
+indicating whether or not it is OK to use DMA for the supplied PACKET
+command.
</para>
+ </sect2>
+
+ <sect2><title>Read specific ATA shadow registers</title>
+ <programlisting>
+u8 (*check_status)(struct ata_port *ap);
+u8 (*check_altstatus)(struct ata_port *ap);
+u8 (*check_err)(struct ata_port *ap);
+ </programlisting>
+
+ <para>
+ Reads the Status/AltStatus/Error ATA shadow register from
+ hardware. On some hardware, reading the Status register has
+ the side effect of clearing the interrupt condition.
+ </para>
+
+ </sect2>
+
+ <sect2><title>Select ATA device on bus</title>
<programlisting>
void (*dev_select)(struct ata_port *ap, unsigned int device);
</programlisting>
@@ -147,9 +187,13 @@
<para>
Issues the low-level hardware command(s) that causes one of N
hardware devices to be considered 'selected' (active and
- available for use) on the ATA bus.
+ available for use) on the ATA bus. This generally has no
+meaning on FIS-based devices.
</para>
+ </sect2>
+
+ <sect2><title>Reset ATA bus</title>
<programlisting>
void (*phy_reset) (struct ata_port *ap);
</programlisting>
@@ -162,17 +206,31 @@
functions ata_bus_reset() or sata_phy_reset() for this hook.
</para>
+ </sect2>
+
+ <sect2><title>Control PCI IDE BMDMA engine</title>
<programlisting>
void (*bmdma_setup) (struct ata_queued_cmd *qc);
void (*bmdma_start) (struct ata_queued_cmd *qc);
+void (*bmdma_stop) (struct ata_port *ap);
+u8 (*bmdma_status) (struct ata_port *ap);
</programlisting>
<para>
- When setting up an IDE BMDMA transaction, these hooks arm
- (->bmdma_setup) and fire (->bmdma_start) the hardware's DMA
- engine.
+When setting up an IDE BMDMA transaction, these hooks arm
+(->bmdma_setup), fire (->bmdma_start), and halt (->bmdma_stop)
+the hardware's DMA engine. ->bmdma_status is used to read the standard
+PCI IDE DMA Status register.
</para>
+ <para>
+These hooks are typically either no-ops, or simply not implemented, in
+FIS-based drivers.
+ </para>
+
+ </sect2>
+
+ <sect2><title>High-level taskfile hooks</title>
<programlisting>
void (*qc_prep) (struct ata_queued_cmd *qc);
int (*qc_issue) (struct ata_queued_cmd *qc);
@@ -190,20 +248,26 @@
->qc_issue is used to make a command active, once the hardware
and S/G tables have been prepared. IDE BMDMA drivers use the
helper function ata_qc_issue_prot() for taskfile protocol-based
- dispatch. More advanced drivers roll their own ->qc_issue
- implementation, using this as the "issue new ATA command to
- hardware" hook.
+ dispatch. More advanced drivers implement their own ->qc_issue.
</para>
+ </sect2>
+
+ <sect2><title>Timeout (error) handling</title>
<programlisting>
void (*eng_timeout) (struct ata_port *ap);
</programlisting>
<para>
- This is a high level error handling function, called from the
- error handling thread, when a command times out.
+This is a high level error handling function, called from the
+error handling thread, when a command times out. Most newer
+hardware will implement its own error handling code here. IDE BMDMA
+drivers may use the helper function ata_eng_timeout().
</para>
+ </sect2>
+
+ <sect2><title>Hardware interrupt handling</title>
<programlisting>
irqreturn_t (*irq_handler)(int, void *, struct pt_regs *);
void (*irq_clear) (struct ata_port *);
@@ -216,6 +280,9 @@
is quiet.
</para>
+ </sect2>
+
+ <sect2><title>SATA phy read/write</title>
<programlisting>
u32 (*scr_read) (struct ata_port *ap, unsigned int sc_reg);
void (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
@@ -227,6 +294,9 @@
if ->phy_reset hook called the sata_phy_reset() helper function.
</para>
+ </sect2>
+
+ <sect2><title>Init and shutdown</title>
<programlisting>
int (*port_start) (struct ata_port *ap);
void (*port_stop) (struct ata_port *ap);
@@ -240,15 +310,17 @@
tasks.
</para>
<para>
- ->host_stop() is called when the rmmod or hot unplug process
- begins. The hook must stop all hardware interrupts, DMA
- engines, etc.
- </para>
- <para>
->port_stop() is called after ->host_stop(). It's sole function
is to release DMA/memory resources, now that they are no longer
actively being used.
</para>
+ <para>
+ ->host_stop() is called after all ->port_stop() calls
+have completed. The hook must finalize hardware shutdown, release DMA
+and other resources, etc.
+ </para>
+
+ </sect2>
</sect1>
</chapter>
@@ -279,4 +351,24 @@
!Idrivers/scsi/sata_sil.c
</chapter>
+ <chapter id="libataThanks">
+ <title>Thanks</title>
+ <para>
+ The bulk of the ATA knowledge comes thanks to long conversations with
+ Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA
+ and SCSI specifications.
+ </para>
+ <para>
+ Thanks to Alan Cox for pointing out similarities
+ between SATA and SCSI, and in general for motivation to hack on
+ libata.
+ </para>
+ <para>
+ libata's device detection
+ method, ata_pio_devchk, and in general all the early probing was
+ based on extensive study of Hale Landis's probe/reset code in his
+ ATADRVR driver (www.ata-atapi.com).
+ </para>
+ </chapter>
+
</book>
diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt
new file mode 100644
index 0000000..e2d1e76
--- /dev/null
+++ b/Documentation/cpu-freq/cpufreq-stats.txt
@@ -0,0 +1,128 @@
+
+ CPU frequency and voltage scaling statictics in the Linux(TM) kernel
+
+
+ L i n u x c p u f r e q - s t a t s d r i v e r
+
+ - information for users -
+
+
+ Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+Contents
+1. Introduction
+2. Statistics Provided (with example)
+3. Configuring cpufreq-stats
+
+
+1. Introduction
+
+cpufreq-stats is a driver that provices CPU frequency statistics for each CPU.
+This statistics is provided in /sysfs as a bunch of read_only interfaces. This
+interface (when configured) will appear in a seperate directory under cpufreq
+in /sysfs (<sysfs root>/devices/system/cpu/cpuX/cpufreq/stats/) for each CPU.
+Various statistics will form read_only files under this directory.
+
+This driver is designed to be independent of any particular cpufreq_driver
+that may be running on your CPU. So, it will work with any cpufreq_driver.
+
+
+2. Statistics Provided (with example)
+
+cpufreq stats provides following statistics (explained in detail below).
+- time_in_state
+- total_trans
+- trans_table
+
+All the statistics will be from the time the stats driver has been inserted
+to the time when a read of a particular statistic is done. Obviously, stats
+driver will not have any information about the the frequcny transitions before
+the stats driver insertion.
+
+--------------------------------------------------------------------------------
+<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # ls -l
+total 0
+drwxr-xr-x 2 root root 0 May 14 16:06 .
+drwxr-xr-x 3 root root 0 May 14 15:58 ..
+-r--r--r-- 1 root root 4096 May 14 16:06 time_in_state
+-r--r--r-- 1 root root 4096 May 14 16:06 total_trans
+-r--r--r-- 1 root root 4096 May 14 16:06 trans_table
+--------------------------------------------------------------------------------
+
+- time_in_state
+This gives the amount of time spent in each of the frequencies supported by
+this CPU. The cat output will have "<frequency> <time>" pair in each line, which
+will mean this CPU spent <time> usertime units of time at <frequency>. Output
+will have one line for each of the supported freuencies. usertime units here
+is 10mS (similar to other time exported in /proc).
+
+--------------------------------------------------------------------------------
+<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat time_in_state
+3600000 2089
+3400000 136
+3200000 34
+3000000 67
+2800000 172488
+--------------------------------------------------------------------------------
+
+
+- total_trans
+This gives the total number of frequency transitions on this CPU. The cat
+output will have a single count which is the total number of frequency
+transitions.
+
+--------------------------------------------------------------------------------
+<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat total_trans
+20
+--------------------------------------------------------------------------------
+
+- trans_table
+This will give a fine grained information about all the CPU frequency
+transitions. The cat output here is a two dimensional matrix, where an entry
+<i,j> (row i, column j) represents the count of number of transitions from
+Freq_i to Freq_j. Freq_i is in descending order with increasing rows and
+Freq_j is in descending order with increasing columns. The output here also
+contains the actual freq values for each row and column for better readability.
+
+--------------------------------------------------------------------------------
+<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table
+ From : To
+ : 3600000 3400000 3200000 3000000 2800000
+ 3600000: 0 5 0 0 0
+ 3400000: 4 0 2 0 0
+ 3200000: 0 1 0 2 0
+ 3000000: 0 0 1 0 3
+ 2800000: 0 0 0 2 0
+--------------------------------------------------------------------------------
+
+
+3. Configuring cpufreq-stats
+
+To configure cpufreq-stats in your kernel
+Config Main Menu
+ Power management options (ACPI, APM) --->
+ CPU Frequency scaling --->
+ [*] CPU Frequency scaling
+ <*> CPU frequency translation statistics
+ [*] CPU frequency translation statistics details
+
+
+"CPU Frequency scaling" (CONFIG_CPU_FREQ) should be enabled to configure
+cpufreq-stats.
+
+"CPU frequency translation statistics" (CONFIG_CPU_FREQ_STAT) provides the
+basic statistics which includes time_in_state and total_trans.
+
+"CPU frequency translation statistics details" (CONFIG_CPU_FREQ_STAT_DETAILS)
+provides fine grained cpufreq stats by trans_table. The reason for having a
+seperate config option for trans_table is:
+- trans_table goes against the traditional /sysfs rule of one value per
+ interface. It provides a whole bunch of value in a 2 dimensional matrix
+ form.
+
+Once these two options are enabled and your CPU supports cpufrequency, you
+will be able to see the CPU frequency statistics in /sysfs.
+
+
+
+
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index 1ad26d2..2f8f24e 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -252,8 +252,7 @@
There is an exception to the above. If hotplug funtionality is used
to remove all the CPUs that are currently assigned to a cpuset,
then the kernel will automatically update the cpus_allowed of all
-tasks attached to CPUs in that cpuset with the online CPUs of the
-nearest parent cpuset that still has some CPUs online. When memory
+tasks attached to CPUs in that cpuset to allow all CPUs. When memory
hotplug functionality for removing Memory Nodes is available, a
similar exception is expected to apply there as well. In general,
the kernel prefers to violate cpuset placement, over starving a task
diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop
new file mode 100644
index 0000000..a50c70f
--- /dev/null
+++ b/Documentation/dvb/README.flexcop
@@ -0,0 +1,205 @@
+This README escorted the skystar2-driver rewriting procedure. It describes the
+state of the new flexcop-driver set and some internals are written down here
+too.
+
+This document hopefully describes things about the flexcop and its
+device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
+drivers based on the skystar2.c and other information.
+
+Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
+touched and rewritten.
+
+History & News
+==============
+ 2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
+
+
+
+
+General coding processing
+=========================
+
+We should proceed as follows (as long as no one complains):
+
+0) Think before start writing code!
+
+1) rewriting the skystar2.c with the help of the flexcop register descriptions
+and splitting up the files to a pci-bus-part and a flexcop-part.
+The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
+device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
+
+2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
+and other pci drivers)
+
+3) make some beautification (see 'Improvements when rewriting (refactoring) is
+done')
+
+4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
+a wider tester audience.
+
+5) creating an usb-bus-part using the already written flexcop code for the pci
+card.
+
+Idea: create a kernel-object for the flexcop and export all important
+functions. This option saves kernel-memory, but maybe a lot of functions have
+to be exported to kernel namespace.
+
+
+Current situation
+=================
+
+0) Done :)
+1) Done (some minor issues left)
+2) Done
+3) Not ready yet, more information is necessary
+4) next to be done (see the table below)
+5) USB driver is working (yes, there are some minor issues)
+
+What seems to be ready?
+-----------------------
+
+1) Rewriting
+1a) i2c is cut off from the flexcop-pci.c and seems to work
+1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
+1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
+1e) eeprom (reading MAC address)
+1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
+1f) misc. register accesses for reading parameters (e.g. resetting, revision)
+1g) pid/mac filter (flexcop-hw-filter.c)
+1i) dvb-stuff initialization in flexcop.c (done)
+1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
+1j) remove flexcop initialization from flexcop-pci.c completely (done)
+1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
+1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
+non-static where possible, moved code to proper places)
+
+2) Search for errors in the leftover of flexcop-pci.c (partially done)
+5a) add MAC address reading
+5c) feeding of ISOC data to the software demux (format of the isochronous data
+and speed optimization, no real error) (thanks to Vadim Catana)
+
+What to do in the near future?
+--------------------------------------
+(no special order here)
+
+5) USB driver
+5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
+
+Testing changes
+---------------
+
+O = item is working
+P = item is partially working
+X = item is not working
+N = item does not apply here
+<empty field> = item need to be examined
+
+ | PCI | USB
+item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
+-------+-------+---------+---------+-------+-------+---------+---------+-------
+1a) | O | | | | N | N | N | N
+1b) | O | | | | | | O |
+1c) | N | N | | | N | N | O |
+1d) | O | O
+1e) | O | O
+1f) | P
+1g) | O
+1h) | P |
+1i) | O | N
+1j) | O | N
+1l) | O | N
+2) | O | N
+5a) | N | O
+5b)* | N |
+5c) | N | O
+
+* - not done yet
+
+Known bugs and problems and TODO
+--------------------------------
+
+1g/h/l) when pid filtering is enabled on the pci card
+
+DMA usage currently:
+ The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
+ address and triggers an IRQ when it's full and starts writing to the second
+ address. When the second address is full, the IRQ is triggered again, and
+ the flexcop writes to first address again, and so on.
+ The buffersize of each address is currently 640*188 bytes.
+
+ Problem is, when using hw-pid-filtering and doing some low-bandwidth
+ operation (like scanning) the buffers won't be filled enough to trigger
+ the IRQ. That's why:
+
+ When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
+ is triggered. Is the current write address of DMA1 different to the one
+ during the last IRQ, then the data is passed to the demuxer.
+
+ There is an additional DMA-IRQ-method: packet count IRQ. This isn't
+ implemented correctly yet.
+
+ The solution is to disable HW PID filtering, but I don't know how the DVB
+ API software demux behaves on slow systems with 45MBit/s TS.
+
+Solved bugs :)
+--------------
+1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
+working)
+SOLUTION: also index 0 was affected, because net_translation is done for
+these indexes by default
+
+5b) isochronous transfer does only work in the first attempt (for the Sky2PC
+USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
+woke up again (don't know if this need fixes, see
+flexcop-fe-tuner.c:flexcop_sleep)
+
+NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
+anything in the while the driver is loaded the first time), no transfers take
+place anymore.
+
+Improvements when rewriting (refactoring) is done
+=================================================
+
+- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
+ (enable sleeping for other demods than dvb-s)
+- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
+
+Debugging
+---------
+- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
+ with this flexcop, this is important, because i2c is now using the
+ flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
+ that, please tell us so).
+
+Everything which is identical in the following table, can be put into a common
+flexcop-module.
+
+ PCI USB
+-------------------------------------------------------------------------------
+Different:
+Register access: accessing IO memory USB control message
+I2C bus: I2C bus of the FC USB control message
+Data transfer: DMA isochronous transfer
+EEPROM transfer: through i2c bus not clear yet
+
+Identical:
+Streaming: accessing registers
+PID Filtering: accessing registers
+Sram destinations: accessing registers
+Tuner/Demod: I2C bus
+DVB-stuff: can be written for common use
+
+Acknowledgements (just for the rewriting part)
+================
+
+Bjarne Steinsbo thought a lot in the first place of the pci part for this code
+sharing idea.
+
+Andreas Oberritter for providing a recent PCI initialization template
+(pluto2.c).
+
+Boleslaw Ciesielski for pointing out a problem with firmware loader.
+
+Vadim Catana for correcting the USB transfer.
+
+comments, critics and ideas to linux-dvb@linuxtv.org.
diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt
index e3cacf4..d64430b 100644
--- a/Documentation/dvb/bt8xx.txt
+++ b/Documentation/dvb/bt8xx.txt
@@ -17,74 +17,53 @@
"Device drivers" => "Multimedia devices"
=> "Video For Linux" => "BT848 Video For Linux"
+Furthermore you need to enable
+"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
+ => "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards"
+
2) Loading Modules
==================
In general you need to load the bttv driver, which will handle the gpio and
-i2c communication for us. Next you need the common dvb-bt8xx device driver
-and one frontend driver.
-
-The bttv driver will HANG YOUR SYSTEM IF YOU DO NOT SPECIFY THE CORRECT
-CARD ID!
-
-(If you don't get your card running and you suspect that the card id you're
-using is wrong, have a look at "bttv-cards.c" for a list of possible card
-ids.)
-
-Pay attention to failures when you load the frontend drivers
-(e.g. dmesg, /var/log/messages).
+i2c communication for us, plus the common dvb-bt8xx device driver.
+The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and
+TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver.
3a) Nebula / Pinnacle PCTV
--------------------------
- $ modprobe bttv i2c_hw=1 card=0x68
- $ modprobe dvb-bt8xx
-
-For Nebula cards use the "nxt6000" frontend driver:
- $ modprobe nxt6000
+ $ modprobe bttv (normally bttv is being loaded automatically by kmod)
+ $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading)
-For Pinnacle PCTV cards use the "cx24110" frontend driver:
- $ modprobe cx24110
-3b) TwinHan
------------
+3b) TwinHan and Clones
+--------------------------
$ modprobe bttv i2c_hw=1 card=0x71
$ modprobe dvb-bt8xx
$ modprobe dst
-The value 0x71 will override the PCI type detection for dvb-bt8xx, which
-is necessary for TwinHan cards.#
+The value 0x71 will override the PCI type detection for dvb-bt8xx,
+which is necessary for TwinHan cards.
-If you're having an older card (blue color circuit) and card=0x71 locks your
-machine, try using 0x68, too. If that does not work, ask on the DVB mailing list.
+If you're having an older card (blue color circuit) and card=0x71 locks
+your machine, try using 0x68, too. If that does not work, ask on the
+mailing list.
-The DST module takes a couple of useful parameters, in case the
-dst drivers fails to detect your type of card correctly.
+The DST module takes a couple of useful parameters.
-dst_type takes values 0 (satellite), 1 (terrestial TV), 2 (cable).
+verbose takes values 0 to 5. These values control the verbosity level.
-dst_type_flags takes bit combined values:
-1 = new tuner type packets. You can use this if your card is detected
- and you have debug and you continually see the tuner packets not
- working (make sure not a basic problem like dish alignment etc.)
+debug takes values 0 and 1. You can either disable or enable debugging.
-2 = TS 204. If your card tunes OK, but the picture is terrible, seemingly
- breaking up in one half continually, and crc fails a lot, then
- this is worth a try (or trying to turn off)
+dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
+0x20 means it has a Conditional Access slot.
-4 = has symdiv. Some cards, mostly without new tuner packets, require
- a symbol division algorithm. Doesn't apply to terrestial TV.
-
-You can also specify a value to have the autodetected values turned off
-(e.g. 0). The autodected values are determined bythe cards 'response
+The autodected values are determined bythe cards 'response
string' which you can see in your logs e.g.
-dst_check_ci: recognize DST-MOT
+dst_get_device_id: Recognise [DSTMCI]
-or
-
-dst_check_ci: unable to recognize DSTXCI or STXCI
--
-Authors: Richard Walker, Jamie Honan, Michael Hunold
+Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham
diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt
new file mode 100644
index 0000000..62e0701
--- /dev/null
+++ b/Documentation/dvb/ci.txt
@@ -0,0 +1,219 @@
+* For the user
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+NOTE: This document describes the usage of the high level CI API as
+in accordance to the Linux DVB API. This is a not a documentation for the,
+existing low level CI API.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To utilize the High Level CI capabilities,
+
+(1*) This point is valid only for the Twinhan/clones
+ For the Twinhan/Twinhan clones, the dst_ca module handles the CI
+ hardware handling.This module is loaded automatically if a CI
+ (Common Interface, that holds the CAM (Conditional Access Module)
+ is detected.
+
+(2) one requires a userspace application, ca_zap. This small userland
+ application is in charge of sending the descrambling related information
+ to the CAM.
+
+This application requires the following to function properly as of now.
+
+ (a) Tune to a valid channel, with szap.
+ eg: $ szap -c channels.conf -r "TMC" -x
+
+ (b) a channels.conf containing a valid PMT PID
+
+ eg: TMC:11996:h:0:27500:278:512:650:321
+
+ here 278 is a valid PMT PID. the rest of the values are the
+ same ones that szap uses.
+
+ (c) after running a szap, you have to run ca_zap, for the
+ descrambler to function,
+
+ eg: $ ca_zap patched_channels.conf "TMC"
+
+ The patched means a patch to apply to scan, such that scan can
+ generate a channels.conf_with pmt, which has this PMT PID info
+ (NOTE: szap cannot use this channels.conf with the PMT_PID)
+
+
+ (d) Hopeflly Enjoy your favourite subscribed channel as you do with
+ a FTA card.
+
+(3) Currently ca_zap, and dst_test, both are meant for demonstration
+ purposes only, they can become full fledged applications if necessary.
+
+
+* Cards that fall in this category
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+At present the cards that fall in this category are the Twinhan and it's
+clones, these cards are available as VVMER, Tomato, Hercules, Orange and
+so on.
+
+* CI modules that are supported
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The CI module support is largely dependant upon the firmware on the cards
+Some cards do support almost all of the available CI modules. There is
+nothing much that can be done in order to make additional CI modules
+working with these cards.
+
+Modules that have been tested by this driver at present are
+
+(1) Irdeto 1 and 2 from SCM
+(2) Viaccess from SCM
+(3) Dragoncam
+
+* The High level CI API
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+* For the programmer
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+With the High Level CI approach any new card with almost any random
+architecture can be implemented with this style, the definitions
+insidethe switch statement can be easily adapted for any card, thereby
+eliminating the need for any additional ioctls.
+
+The disadvantage is that the driver/hardware has to manage the rest. For
+the application programmer it would be as simple as sending/receiving an
+array to/from the CI ioctls as defined in the Linux DVB API. No changes
+have been made in the API to accomodate this feature.
+
+
+* Why the need for another CI interface ?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+This is one of the most commonly asked question. Well a nice question.
+Strictly speaking this is not a new interface.
+
+The CI interface is defined in the DVB API in ca.h as
+
+typedef struct ca_slot_info {
+ int num; /* slot number */
+
+ int type; /* CA interface this slot supports */
+#define CA_CI 1 /* CI high level interface */
+#define CA_CI_LINK 2 /* CI link layer level interface */
+#define CA_CI_PHYS 4 /* CI physical layer level interface */
+#define CA_DESCR 8 /* built-in descrambler */
+#define CA_SC 128 /* simple smart card interface */
+
+ unsigned int flags;
+#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */
+#define CA_CI_MODULE_READY 2
+} ca_slot_info_t;
+
+
+
+This CI interface follows the CI high level interface, which is not
+implemented by most applications. Hence this area is revisited.
+
+This CI interface is quite different in the case that it tries to
+accomodate all other CI based devices, that fall into the other categories
+
+This means that this CI interface handles the EN50221 style tags in the
+Application layer only and no session management is taken care of by the
+application. The driver/hardware will take care of all that.
+
+This interface is purely an EN50221 interface exchanging APDU's. This
+means that no session management, link layer or a transport layer do
+exist in this case in the application to driver communication. It is
+as simple as that. The driver/hardware has to take care of that.
+
+
+With this High Level CI interface, the interface can be defined with the
+regular ioctls.
+
+All these ioctls are also valid for the High level CI interface
+
+#define CA_RESET _IO('o', 128)
+#define CA_GET_CAP _IOR('o', 129, ca_caps_t)
+#define CA_GET_SLOT_INFO _IOR('o', 130, ca_slot_info_t)
+#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t)
+#define CA_GET_MSG _IOR('o', 132, ca_msg_t)
+#define CA_SEND_MSG _IOW('o', 133, ca_msg_t)
+#define CA_SET_DESCR _IOW('o', 134, ca_descr_t)
+#define CA_SET_PID _IOW('o', 135, ca_pid_t)
+
+
+On querying the device, the device yields information thus
+
+CA_GET_SLOT_INFO
+----------------------------
+Command = [info]
+APP: Number=[1]
+APP: Type=[1]
+APP: flags=[1]
+APP: CI High level interface
+APP: CA/CI Module Present
+
+CA_GET_CAP
+----------------------------
+Command = [caps]
+APP: Slots=[1]
+APP: Type=[1]
+APP: Descrambler keys=[16]
+APP: Type=[1]
+
+CA_SEND_MSG
+----------------------------
+Descriptors(Program Level)=[ 09 06 06 04 05 50 ff f1]
+Found CA descriptor @ program level
+
+(20) ES type=[2] ES pid=[201] ES length =[0 (0x0)]
+(25) ES type=[4] ES pid=[301] ES length =[0 (0x0)]
+ca_message length is 25 (0x19) bytes
+EN50221 CA MSG=[ 9f 80 32 19 03 01 2d d1 f0 08 01 09 06 06 04 05 50 ff f1 02 e0 c9 00 00 04 e1 2d 00 00]
+
+
+Not all ioctl's are implemented in the driver from the API, the other
+features of the hardware that cannot be implemented by the API are achieved
+using the CA_GET_MSG and CA_SEND_MSG ioctls. An EN50221 style wrapper is
+used to exchange the data to maintain compatibility with other hardware.
+
+
+/* a message to/from a CI-CAM */
+typedef struct ca_msg {
+ unsigned int index;
+ unsigned int type;
+ unsigned int length;
+ unsigned char msg[256];
+} ca_msg_t;
+
+
+The flow of data can be described thus,
+
+
+
+
+
+ App (User)
+ -----
+ parse
+ |
+ |
+ v
+ en50221 APDU (package)
+ --------------------------------------
+ | | | High Level CI driver
+ | | |
+ | v |
+ | en50221 APDU (unpackage) |
+ | | |
+ | | |
+ | v |
+ | sanity checks |
+ | | |
+ | | |
+ | v |
+ | do (H/W dep) |
+ --------------------------------------
+ | Hardware
+ |
+ v
+
+
+
+
+The High Level CI interface uses the EN50221 DVB standard, following a
+standard ensures futureproofness.
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 3ffdcb3..a750f01 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -107,7 +107,7 @@
sub tda10046 {
my $sourcefile = "tt_budget_217g.zip";
my $url = "http://www.technotrend.de/new/217g/$sourcefile";
- my $hash = "a25b579e37109af60f4a36c37893957c";
+ my $hash = "6a7e1e2f2644b162ff0502367553c72d";
my $outfile = "dvb-fe-tda10046.fw";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@@ -115,7 +115,7 @@
wgetfile($sourcefile, $url);
unzip($sourcefile, $tmpdir);
- extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24479, "$tmpdir/fwtmp");
+ extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24478, "$tmpdir/fwtmp");
verify("$tmpdir/fwtmp", $hash);
copy("$tmpdir/fwtmp", $outfile);
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index d3c52dd..b9eb209 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -63,3 +63,23 @@
people, who might be using implementations that I am not aware
of, to adjust to this upcoming change.
Who: Paul E. McKenney <paulmck@us.ibm.com>
+
+---------------------------
+
+What: IEEE1394 Audio and Music Data Transmission Protocol driver,
+ Connection Management Procedures driver
+When: November 2005
+Files: drivers/ieee1394/{amdtp,cmp}*
+Why: These are incomplete, have never worked, and are better implemented
+ in userland via raw1394 (see http://freebob.sourceforge.net/ for
+ example.)
+Who: Jody McIntyre <scjody@steamballoon.com>
+
+---------------------------
+
+What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
+When: November 2005
+Why: Deprecated in favour of the new ioctl-based rawiso interface, which is
+ more efficient. You should really be using libraw1394 for raw1394
+ access anyway.
+Who: Jody McIntyre <scjody@steamballoon.com>
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index e97d024..988a62f 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -7,7 +7,6 @@
|-- 0000:17:00.0
| |-- class
| |-- config
- | |-- detach_state
| |-- device
| |-- irq
| |-- local_cpus
@@ -19,7 +18,7 @@
| |-- subsystem_device
| |-- subsystem_vendor
| `-- vendor
- `-- detach_state
+ `-- ...
The topmost element describes the PCI domain and bus number. In this case,
the domain number is 0000 and the bus number is 17 (both values are in hex).
@@ -31,7 +30,6 @@
---- --------
class PCI class (ascii, ro)
config PCI config space (binary, rw)
- detach_state connection status (bool, rw)
device PCI device (ascii, ro)
irq IRQ number (ascii, ro)
local_cpus nearby CPU mask (cpumask, ro)
@@ -85,4 +83,4 @@
Legacy resources are protected by the HAVE_PCI_LEGACY define. Platforms
wishing to support legacy functionality should define it and provide
-pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.
\ No newline at end of file
+pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 5d4ae9a..f987afe 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -207,27 +207,6 @@
#READY_AFTER_RESUME
#
-Driver Detach Power Management
-
-The kernel now supports the ability to place a device in a low-power
-state when it is detached from its driver, which happens when its
-module is removed.
-
-Each device contains a 'detach_state' file in its sysfs directory
-which can be used to control this state. Reading from this file
-displays what the current detach state is set to. This is 0 (On) by
-default. A user may write a positive integer value to this file in the
-range of 1-4 inclusive.
-
-A value of 1-3 will indicate the device should be placed in that
-low-power state, which will cause ->suspend() to be called for that
-device. A value of 4 indicates that the device should be shutdown, so
-->shutdown() will be called for that device.
-
-The driver is responsible for reinitializing the device when the
-module is re-inserted during it's ->probe() (or equivalent) method.
-The driver core will not call any extra functions when binding the
-device to the driver.
pm_message_t meaning
diff --git a/Documentation/powerpc/hvcs.txt b/Documentation/powerpc/hvcs.txt
index c0a62e1..dca75cb 100644
--- a/Documentation/powerpc/hvcs.txt
+++ b/Documentation/powerpc/hvcs.txt
@@ -347,8 +347,8 @@
looks like the following:
Pow5:/sys/bus/vio/drivers/hvcs/30000004 # ls
- . current_vty devspec name partner_vtys
- .. detach_state index partner_clcs vterm_state
+ . current_vty devspec name partner_vtys
+ .. index partner_clcs vterm_state
Each entry is provided, by default with a "name" attribute. Reading the
"name" attribute will reveal the device type as shown in the following
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 44b6eea..b9e6be0 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -25,6 +25,9 @@
noapictimer Don't set up the APIC timer
+ no_timer_check Don't check the IO-APIC timer. This can work around
+ problems with incorrect timer initialization on some boards.
+
Early Console
syntax: earlyprintk=vga
diff --git a/MAINTAINERS b/MAINTAINERS
index 5b84833..65ad825 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -239,6 +239,12 @@
W: http://www.linux-usb.org/SpeedTouch/
S: Maintained
+ALI1563 I2C DRIVER
+P: Rudolf Marek
+M: r.marek@sh.cvut.cz
+L: sensors@stimpy.netroedge.com
+S: Maintained
+
ALPHA PORT
P: Richard Henderson
M: rth@twiddle.net
@@ -1023,8 +1029,8 @@
S: Maintained
SN-IA64 (Itanium) SUB-PLATFORM
-P: Jesse Barnes
-M: jbarnes@sgi.com
+P: Greg Edwards
+M: edwardsg@sgi.com
L: linux-altix@sgi.com
L: linux-ia64@vger.kernel.org
W: http://www.sgi.com/altix
diff --git a/Makefile b/Makefile
index bddcb86..c11a317 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 12
-EXTRAVERSION =-rc4
+EXTRAVERSION =-rc5
NAME=Woozy Numbat
# *DOCUMENTATION*
@@ -530,7 +530,7 @@
include $(srctree)/arch/$(ARCH)/Makefile
# arch Makefile may override CC so keep this after arch Makefile is included
-NOSTDINC_FLAGS := -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
CHECKFLAGS += $(NOSTDINC_FLAGS)
# warn about C99 declaration after statement
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 64e450d..167fd89f 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -1150,16 +1150,13 @@
if (get_tv32(&tmp, sleep))
goto fault;
- ticks = tmp.tv_usec;
- ticks = (ticks + (1000000 / HZ) - 1) / (1000000 / HZ);
- ticks += tmp.tv_sec * HZ;
+ ticks = timeval_to_jiffies(&tmp);
current->state = TASK_INTERRUPTIBLE;
ticks = schedule_timeout(ticks);
if (remain) {
- tmp.tv_sec = ticks / HZ;
- tmp.tv_usec = ticks % HZ;
+ jiffies_to_timeval(ticks, &tmp);
if (put_tv32(remain, &tmp))
goto fault;
}
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index e23f534..8d986b8 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -478,7 +478,7 @@
{
unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
- s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate) * 2;
+ s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate);
printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n",
print_mhz(s3c2440_clk_upll.rate));
diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c
index 9a8cc5a..d4c8281 100644
--- a/arch/arm/mach-s3c2410/s3c2440.c
+++ b/arch/arm/mach-s3c2410/s3c2440.c
@@ -192,9 +192,11 @@
iotable_init(s3c2440_iodesc, ARRAY_SIZE(s3c2440_iodesc));
iotable_init(mach_desc, size);
+
/* rename any peripherals used differing from the s3c2410 */
- s3c_device_i2c.name = "s3c2440-i2c";
+ s3c_device_i2c.name = "s3c2440-i2c";
+ s3c_device_nand.name = "s3c2440-nand";
/* change irq for watchdog */
@@ -225,7 +227,7 @@
break;
case S3C2440_CLKDIVN_HDIVN_2:
- hdiv = 1;
+ hdiv = 2;
break;
case S3C2440_CLKDIVN_HDIVN_4_8:
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c4fc6be..48bac7d 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -412,21 +412,20 @@
config TLS_REG_EMUL
bool
- default y if (SMP || CPU_32v6) && (CPU_32v5 || CPU_32v4 || CPU_32v3)
+ default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3)
help
- We might be running on an ARMv6+ processor which should have the TLS
- register but for some reason we can't use it, or maybe an SMP system
- using a pre-ARMv6 processor (there are apparently a few prototypes
- like that in existence) and therefore access to that register must
- be emulated.
+ An SMP system using a pre-ARMv6 processor (there are apparently
+ a few prototypes like that in existence) and therefore access to
+ that required register must be emulated.
config HAS_TLS_REG
bool
- depends on CPU_32v6
- default y if !TLS_REG_EMUL
+ depends on !TLS_REG_EMUL
+ default y if SMP || CPU_32v7
help
This selects support for the CP15 thread register.
- It is defined to be available on ARMv6 or later. If a particular
- ARMv6 or later CPU doesn't support it then it must omc;ide "select
- TLS_REG_EMUL" along with its other caracteristics.
+ It is defined to be available on some ARMv6 processors (including
+ all SMP capable ARMv6's) or later processors. User space may
+ assume directly accessing that register and always obtain the
+ expected value only on ARMv7 and above.
diff --git a/arch/arm/mm/copypage-v4mc.S b/arch/arm/mm/copypage-v4mc.S
deleted file mode 100644
index 305af3d..0000000
--- a/arch/arm/mm/copypage-v4mc.S
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * linux/arch/arm/lib/copy_page-armv4mc.S
- *
- * Copyright (C) 1995-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/constants.h>
-
- .text
- .align 5
-/*
- * ARMv4 mini-dcache optimised copy_user_page
- *
- * We flush the destination cache lines just before we write the data into the
- * corresponding address. Since the Dcache is read-allocate, this removes the
- * Dcache aliasing issue. The writes will be forwarded to the write buffer,
- * and merged as appropriate.
- *
- * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
- * instruction. If your processor does not supply this, you have to write your
- * own copy_user_page that does the right thing.
- */
-ENTRY(v4_mc_copy_user_page)
- stmfd sp!, {r4, lr} @ 2
- mov r4, r0
- mov r0, r1
- bl map_page_minicache
- mov r1, #PAGE_SZ/64 @ 1
- ldmia r0!, {r2, r3, ip, lr} @ 4
-1: mcr p15, 0, r4, c7, c6, 1 @ 1 invalidate D line
- stmia r4!, {r2, r3, ip, lr} @ 4
- ldmia r0!, {r2, r3, ip, lr} @ 4+1
- stmia r4!, {r2, r3, ip, lr} @ 4
- ldmia r0!, {r2, r3, ip, lr} @ 4
- mcr p15, 0, r4, c7, c6, 1 @ 1 invalidate D line
- stmia r4!, {r2, r3, ip, lr} @ 4
- ldmia r0!, {r2, r3, ip, lr} @ 4
- subs r1, r1, #1 @ 1
- stmia r4!, {r2, r3, ip, lr} @ 4
- ldmneia r0!, {r2, r3, ip, lr} @ 4
- bne 1b @ 1
- ldmfd sp!, {r4, pc} @ 3
-
- .align 5
-/*
- * ARMv4 optimised clear_user_page
- *
- * Same story as above.
- */
-ENTRY(v4_mc_clear_user_page)
- str lr, [sp, #-4]!
- mov r1, #PAGE_SZ/64 @ 1
- mov r2, #0 @ 1
- mov r3, #0 @ 1
- mov ip, #0 @ 1
- mov lr, #0 @ 1
-1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
- stmia r0!, {r2, r3, ip, lr} @ 4
- stmia r0!, {r2, r3, ip, lr} @ 4
- mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
- stmia r0!, {r2, r3, ip, lr} @ 4
- stmia r0!, {r2, r3, ip, lr} @ 4
- subs r1, r1, #1 @ 1
- bne 1b @ 1
- ldr pc, [sp], #4
-
- __INITDATA
-
- .type v4_mc_user_fns, #object
-ENTRY(v4_mc_user_fns)
- .long v4_mc_clear_user_page
- .long v4_mc_copy_user_page
- .size v4_mc_user_fns, . - v4_mc_user_fns
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
new file mode 100644
index 0000000..fc69dcc
--- /dev/null
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -0,0 +1,111 @@
+/*
+ * linux/arch/arm/lib/copypage-armv4mc.S
+ *
+ * Copyright (C) 1995-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This handles the mini data cache, as found on SA11x0 and XScale
+ * processors. When we copy a user page page, we map it in such a way
+ * that accesses to this page will not touch the main data cache, but
+ * will be cached in the mini data cache. This prevents us thrashing
+ * the main data cache on page faults.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+/*
+ * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
+ * specific hacks for copying pages efficiently.
+ */
+#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
+ L_PTE_CACHEABLE)
+
+#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
+
+static DEFINE_SPINLOCK(minicache_lock);
+
+/*
+ * ARMv4 mini-dcache optimised copy_user_page
+ *
+ * We flush the destination cache lines just before we write the data into the
+ * corresponding address. Since the Dcache is read-allocate, this removes the
+ * Dcache aliasing issue. The writes will be forwarded to the write buffer,
+ * and merged as appropriate.
+ *
+ * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
+ * instruction. If your processor does not supply this, you have to write your
+ * own copy_user_page that does the right thing.
+ */
+static void __attribute__((naked))
+mc_copy_user_page(void *from, void *to)
+{
+ asm volatile(
+ "stmfd sp!, {r4, lr} @ 2\n\
+ mov r4, %2 @ 1\n\
+ ldmia %0!, {r2, r3, ip, lr} @ 4\n\
+1: mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia %1!, {r2, r3, ip, lr} @ 4\n\
+ ldmia %0!, {r2, r3, ip, lr} @ 4+1\n\
+ stmia %1!, {r2, r3, ip, lr} @ 4\n\
+ ldmia %0!, {r2, r3, ip, lr} @ 4\n\
+ mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia %1!, {r2, r3, ip, lr} @ 4\n\
+ ldmia %0!, {r2, r3, ip, lr} @ 4\n\
+ subs r4, r4, #1 @ 1\n\
+ stmia %1!, {r2, r3, ip, lr} @ 4\n\
+ ldmneia %0!, {r2, r3, ip, lr} @ 4\n\
+ bne 1b @ 1\n\
+ ldmfd sp!, {r4, pc} @ 3"
+ :
+ : "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
+}
+
+void v4_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
+{
+ spin_lock(&minicache_lock);
+
+ set_pte(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot));
+ flush_tlb_kernel_page(0xffff8000);
+
+ mc_copy_user_page((void *)0xffff8000, kto);
+
+ spin_unlock(&minicache_lock);
+}
+
+/*
+ * ARMv4 optimised clear_user_page
+ */
+void __attribute__((naked))
+v4_mc_clear_user_page(void *kaddr, unsigned long vaddr)
+{
+ asm volatile(
+ "str lr, [sp, #-4]!\n\
+ mov r1, %0 @ 1\n\
+ mov r2, #0 @ 1\n\
+ mov r3, #0 @ 1\n\
+ mov ip, #0 @ 1\n\
+ mov lr, #0 @ 1\n\
+1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia r0!, {r2, r3, ip, lr} @ 4\n\
+ stmia r0!, {r2, r3, ip, lr} @ 4\n\
+ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia r0!, {r2, r3, ip, lr} @ 4\n\
+ stmia r0!, {r2, r3, ip, lr} @ 4\n\
+ subs r1, r1, #1 @ 1\n\
+ bne 1b @ 1\n\
+ ldr pc, [sp], #4"
+ :
+ : "I" (PAGE_SIZE / 64));
+}
+
+struct cpu_user_fns v4_mc_user_fns __initdata = {
+ .cpu_clear_user_page = v4_mc_clear_user_page,
+ .cpu_copy_user_page = v4_mc_copy_user_page,
+};
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 694ac82..a8c0023 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -26,8 +26,8 @@
#define to_address (0xffffc000)
#define to_pgprot PAGE_KERNEL
-static pte_t *from_pte;
-static pte_t *to_pte;
+#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
+
static DEFINE_SPINLOCK(v6_lock);
#define DCACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
@@ -74,8 +74,8 @@
*/
spin_lock(&v6_lock);
- set_pte(from_pte + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
- set_pte(to_pte + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
+ set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
+ set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
from = from_address + (offset << PAGE_SHIFT);
to = to_address + (offset << PAGE_SHIFT);
@@ -114,7 +114,7 @@
*/
spin_lock(&v6_lock);
- set_pte(to_pte + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
+ set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
flush_tlb_kernel_page(to);
clear_page((void *)to);
@@ -129,21 +129,6 @@
static int __init v6_userpage_init(void)
{
if (cache_is_vipt_aliasing()) {
- pgd_t *pgd;
- pmd_t *pmd;
-
- pgd = pgd_offset_k(from_address);
- pmd = pmd_alloc(&init_mm, pgd, from_address);
- if (!pmd)
- BUG();
- from_pte = pte_alloc_kernel(&init_mm, pmd, from_address);
- if (!from_pte)
- BUG();
-
- to_pte = pte_alloc_kernel(&init_mm, pmd, to_address);
- if (!to_pte)
- BUG();
-
cpu_user.cpu_clear_user_page = v6_clear_user_page_aliasing;
cpu_user.cpu_copy_user_page = v6_copy_user_page_aliasing;
}
@@ -151,5 +136,4 @@
return 0;
}
-__initcall(v6_userpage_init);
-
+core_initcall(v6_userpage_init);
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index c6de48d..4085ed9 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -13,6 +13,29 @@
#include <asm/cacheflush.h>
#include <asm/system.h>
+#include <asm/tlbflush.h>
+
+#ifdef CONFIG_CPU_CACHE_VIPT
+#define ALIAS_FLUSH_START 0xffff4000
+
+#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
+
+static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
+{
+ unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
+
+ set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL));
+ flush_tlb_kernel_page(to);
+
+ asm( "mcrr p15, 0, %1, %0, c14\n"
+ " mcrr p15, 0, %1, %0, c5\n"
+ :
+ : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES)
+ : "cc");
+}
+#else
+#define flush_pfn_alias(pfn,vaddr) do { } while (0)
+#endif
static void __flush_dcache_page(struct address_space *mapping, struct page *page)
{
@@ -37,6 +60,18 @@
return;
/*
+ * This is a page cache page. If we have a VIPT cache, we
+ * only need to do one flush - which would be at the relevant
+ * userspace colour, which is congruent with page->index.
+ */
+ if (cache_is_vipt()) {
+ if (cache_is_vipt_aliasing())
+ flush_pfn_alias(page_to_pfn(page),
+ page->index << PAGE_CACHE_SHIFT);
+ return;
+ }
+
+ /*
* There are possible user space mappings of this page:
* - VIVT cache: we need to also write back and invalidate all user
* data in the current VM view associated with this page.
@@ -57,8 +92,6 @@
continue;
offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
flush_cache_page(mpnt, mpnt->vm_start + offset, page_to_pfn(page));
- if (cache_is_vipt())
- break;
}
flush_dcache_mmap_unlock(mapping);
}
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index 585dfb8..2c2b93d 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -37,6 +37,8 @@
EXPORT_SYMBOL(pgprot_kernel);
+pmd_t *top_pmd;
+
struct cachepolicy {
const char policy[16];
unsigned int cr_mask;
@@ -142,6 +144,16 @@
#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
+static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
+{
+ return pmd_offset(pgd, virt);
+}
+
+static inline pmd_t *pmd_off_k(unsigned long virt)
+{
+ return pmd_off(pgd_offset_k(virt), virt);
+}
+
/*
* need to get a 16k page for level 1
*/
@@ -220,7 +232,7 @@
return;
/* pgd is always present and good */
- pmd = (pmd_t *)pgd;
+ pmd = pmd_off(pgd, 0);
if (pmd_none(*pmd))
goto free;
if (pmd_bad(*pmd)) {
@@ -246,9 +258,8 @@
static inline void
alloc_init_section(unsigned long virt, unsigned long phys, int prot)
{
- pmd_t *pmdp;
+ pmd_t *pmdp = pmd_off_k(virt);
- pmdp = pmd_offset(pgd_offset_k(virt), virt);
if (virt & (1 << 20))
pmdp++;
@@ -283,11 +294,9 @@
static inline void
alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot)
{
- pmd_t *pmdp;
+ pmd_t *pmdp = pmd_off_k(virt);
pte_t *ptep;
- pmdp = pmd_offset(pgd_offset_k(virt), virt);
-
if (pmd_none(*pmdp)) {
unsigned long pmdval;
ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE *
@@ -310,7 +319,7 @@
*/
static inline void clear_mapping(unsigned long virt)
{
- pmd_clear(pmd_offset(pgd_offset_k(virt), virt));
+ pmd_clear(pmd_off_k(virt));
}
struct mem_types {
@@ -578,7 +587,7 @@
PMD_TYPE_SECT;
if (cpu_arch <= CPU_ARCH_ARMv5)
pmdval |= PMD_BIT4;
- pmd = pmd_offset(pgd + i, i << PGDIR_SHIFT);
+ pmd = pmd_off(pgd, i << PGDIR_SHIFT);
pmd[0] = __pmd(pmdval);
pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
flush_pmd_entry(pmd);
@@ -675,6 +684,8 @@
flush_cache_all();
flush_tlb_all();
+
+ top_pmd = pmd_off_k(0xffff0000);
}
/*
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index 134aec1..b5f83e9 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -54,7 +54,7 @@
void default_idle(void)
{
while(1) {
- if (need_resched()) {
+ if (!need_resched()) {
local_irq_enable();
__asm__("sleep");
local_irq_disable();
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index e382f32..dfd904f 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -1163,7 +1163,7 @@
config PCI_MMCONFIG
bool
- depends on PCI && (PCI_GOMMCONFIG || (PCI_GOANY && ACPI))
+ depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
select ACPI_BOOT
default y
diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c
index 16dbc41..73aeaf5 100644
--- a/arch/i386/kernel/cpu/amd.c
+++ b/arch/i386/kernel/cpu/amd.c
@@ -24,9 +24,6 @@
static void __init init_amd(struct cpuinfo_x86 *c)
{
-#ifdef CONFIG_X86_SMP
- int cpu = c == &boot_cpu_data ? 0 : c - cpu_data;
-#endif
u32 l, h;
int mbytes = num_physpages >> (20-PAGE_SHIFT);
int r;
@@ -198,14 +195,19 @@
c->x86_num_cores = 1;
}
-#ifdef CONFIG_X86_SMP
+#ifdef CONFIG_X86_HT
/*
* On a AMD dual core setup the lower bits of the APIC id
* distingush the cores. Assumes number of cores is a power
* of two.
*/
if (c->x86_num_cores > 1) {
- cpu_core_id[cpu] = cpu >> hweight32(c->x86_num_cores - 1);
+ int cpu = smp_processor_id();
+ unsigned bits = 0;
+ while ((1 << bits) < c->x86_num_cores)
+ bits++;
+ cpu_core_id[cpu] = phys_proc_id[cpu] & ((1<<bits)-1);
+ phys_proc_id[cpu] >>= bits;
printk(KERN_INFO "CPU %d(%d) -> Core %d\n",
cpu, c->x86_num_cores, cpu_core_id[cpu]);
}
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
index 6be0310..d199e52 100644
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/i386/kernel/cpu/common.c
@@ -243,6 +243,10 @@
}
early_intel_workaround(c);
+
+#ifdef CONFIG_X86_HT
+ phys_proc_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff;
+#endif
}
void __init generic_identify(struct cpuinfo_x86 * c)
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
index f25ffd7..0f1eb50 100644
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -23,7 +23,7 @@
If in doubt, say N.
config ELAN_CPUFREQ
- tristate "AMD Elan"
+ tristate "AMD Elan SC400 and SC410"
select CPU_FREQ_TABLE
depends on X86_ELAN
---help---
@@ -38,6 +38,18 @@
If in doubt, say N.
+config SC520_CPUFREQ
+ tristate "AMD Elan SC520"
+ select CPU_FREQ_TABLE
+ depends on X86_ELAN
+ ---help---
+ This adds the CPUFreq driver for AMD Elan SC520 processor.
+
+ For details, take a look at <file:Documentation/cpu-freq/>.
+
+ If in doubt, say N.
+
+
config X86_POWERNOW_K6
tristate "AMD Mobile K6-2/K6-3 PowerNow!"
select CPU_FREQ_TABLE
diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile
index a922e97..2e894f1 100644
--- a/arch/i386/kernel/cpu/cpufreq/Makefile
+++ b/arch/i386/kernel/cpu/cpufreq/Makefile
@@ -3,6 +3,7 @@
obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
obj-$(CONFIG_X86_LONGHAUL) += longhaul.o
obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o
+obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o
obj-$(CONFIG_X86_LONGRUN) += longrun.o
obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o
obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
index ab0f9f5..04e3563d 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -29,6 +29,7 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/pci.h>
#include <asm/msr.h>
#include <asm/timex.h>
@@ -119,7 +120,13 @@
static void do_powersaver(union msr_longhaul *longhaul,
unsigned int clock_ratio_index)
{
+ struct pci_dev *dev;
+ unsigned long flags;
+ unsigned int tmp_mask;
int version;
+ int i;
+ u16 pci_cmd;
+ u16 cmd_state[64];
switch (cpu_model) {
case CPU_EZRA_T:
@@ -137,17 +144,58 @@
longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
longhaul->bits.EnableSoftBusRatio = 1;
longhaul->bits.RevisionKey = 0;
- local_irq_disable();
- wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+
+ preempt_disable();
+ local_irq_save(flags);
+
+ /*
+ * get current pci bus master state for all devices
+ * and clear bus master bit
+ */
+ dev = NULL;
+ i = 0;
+ do {
+ dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
+ if (dev != NULL) {
+ pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
+ cmd_state[i++] = pci_cmd;
+ pci_cmd &= ~PCI_COMMAND_MASTER;
+ pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
+ }
+ } while (dev != NULL);
+
+ tmp_mask=inb(0x21); /* works on C3. save mask. */
+ outb(0xFE,0x21); /* TMR0 only */
+ outb(0xFF,0x80); /* delay */
+
local_irq_enable();
+
+ __hlt();
+ wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
__hlt();
+ local_irq_disable();
+
+ outb(tmp_mask,0x21); /* restore mask */
+
+ /* restore pci bus master state for all devices */
+ dev = NULL;
+ i = 0;
+ do {
+ dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
+ if (dev != NULL) {
+ pci_cmd = cmd_state[i++];
+ pci_write_config_byte(dev, PCI_COMMAND, pci_cmd);
+ }
+ } while (dev != NULL);
+ local_irq_restore(flags);
+ preempt_enable();
+
+ /* disable bus ratio bit */
rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
longhaul->bits.EnableSoftBusRatio = 0;
longhaul->bits.RevisionKey = version;
- local_irq_disable();
wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
- local_irq_enable();
}
/**
@@ -578,7 +626,7 @@
longhaul_setup_voltagescaling();
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
- policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->cpuinfo.transition_latency = 200000; /* nsec */
policy->cur = calc_speed(longhaul_get_cpu_mult());
ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
index 913f652..5c53006 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
@@ -23,6 +23,7 @@
#include <linux/dmi.h>
#include <asm/msr.h>
+#include <asm/timer.h>
#include <asm/timex.h>
#include <asm/io.h>
#include <asm/system.h>
@@ -586,13 +587,17 @@
rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
- /* A K7 with powernow technology is set to max frequency by BIOS */
- fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.MFID];
+ /* recalibrate cpu_khz */
+ result = recalibrate_cpu_khz();
+ if (result)
+ return result;
+
+ fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
if (!fsb) {
printk(KERN_WARNING PFX "can not determine bus frequency\n");
return -EINVAL;
}
- dprintk("FSB: %3d.%03d MHz\n", fsb/1000, fsb%1000);
+ dprintk("FSB: %3dMHz\n", fsb/1000);
if (dmi_check_system(powernow_dmi_table) || acpi_force) {
printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n");
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index a65ff7e..10cc096 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -4,7 +4,7 @@
* GNU general public license version 2. See "COPYING" or
* http://www.gnu.org/licenses/gpl.html
*
- * Support : paul.devriendt@amd.com
+ * Support : mark.langsdorf@amd.com
*
* Based on the powernow-k7.c module written by Dave Jones.
* (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs
@@ -15,12 +15,13 @@
*
* Valuable input gratefully received from Dave Jones, Pavel Machek,
* Dominik Brodowski, and others.
+ * Originally developed by Paul Devriendt.
* Processor information obtained from Chapter 9 (Power and Thermal Management)
* of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
* Opteron Processors" available for download from www.amd.com
*
* Tables for specific CPUs can be infrerred from
- * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf
*/
#include <linux/kernel.h>
@@ -30,6 +31,7 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/cpumask.h>
#include <asm/msr.h>
#include <asm/io.h>
@@ -42,7 +44,7 @@
#define PFX "powernow-k8: "
#define BFX PFX "BIOS error: "
-#define VERSION "version 1.00.09e"
+#define VERSION "version 1.40.2"
#include "powernow-k8.h"
/* serialize freq changes */
@@ -50,6 +52,10 @@
static struct powernow_k8_data *powernow_data[NR_CPUS];
+#ifndef CONFIG_SMP
+static cpumask_t cpu_core_map[1];
+#endif
+
/* Return a frequency in MHz, given an input fid */
static u32 find_freq_from_fid(u32 fid)
{
@@ -274,11 +280,18 @@
{
u32 rvosteps = data->rvo;
u32 savefid = data->currfid;
+ u32 maxvid, lo;
dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n",
smp_processor_id(),
data->currfid, data->currvid, reqvid, data->rvo);
+ rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
+ maxvid = 0x1f & (maxvid >> 16);
+ dprintk("ph1 maxvid=0x%x\n", maxvid);
+ if (reqvid < maxvid) /* lower numbers are higher voltages */
+ reqvid = maxvid;
+
while (data->currvid > reqvid) {
dprintk("ph1: curr 0x%x, req vid 0x%x\n",
data->currvid, reqvid);
@@ -286,8 +299,8 @@
return 1;
}
- while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
- if (data->currvid == 0) {
+ while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
+ if (data->currvid == maxvid) {
rvosteps = 0;
} else {
dprintk("ph1: changing vid for rvo, req 0x%x\n",
@@ -671,7 +684,7 @@
* BIOS and Kernel Developer's Guide, which is available on
* www.amd.com
*/
- printk(KERN_ERR PFX "BIOS error - no PSB\n");
+ printk(KERN_INFO PFX "BIOS error - no PSB or ACPI _PSS objects\n");
return -ENODEV;
}
@@ -695,7 +708,7 @@
struct cpufreq_frequency_table *powernow_table;
if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
- dprintk("register performance failed\n");
+ dprintk("register performance failed: bad ACPI data\n");
return -EIO;
}
@@ -746,22 +759,23 @@
continue;
}
- if (fid < HI_FID_TABLE_BOTTOM) {
- if (cntlofreq) {
- /* if both entries are the same, ignore this
- * one...
- */
- if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
- (powernow_table[i].index != powernow_table[cntlofreq].index)) {
- printk(KERN_ERR PFX "Too many lo freq table entries\n");
- goto err_out_mem;
- }
-
- dprintk("double low frequency table entry, ignoring it.\n");
- powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
- continue;
- } else
- cntlofreq = i;
+ /* verify only 1 entry from the lo frequency table */
+ if (fid < HI_FID_TABLE_BOTTOM) {
+ if (cntlofreq) {
+ /* if both entries are the same, ignore this
+ * one...
+ */
+ if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
+ (powernow_table[i].index != powernow_table[cntlofreq].index)) {
+ printk(KERN_ERR PFX "Too many lo freq table entries\n");
+ goto err_out_mem;
+ }
+
+ dprintk("double low frequency table entry, ignoring it.\n");
+ powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ continue;
+ } else
+ cntlofreq = i;
}
if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
@@ -816,7 +830,7 @@
{
u32 fid;
u32 vid;
- int res;
+ int res, i;
struct cpufreq_freqs freqs;
dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
@@ -841,7 +855,8 @@
}
if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
- printk("ignoring illegal change in lo freq table-%x to 0x%x\n",
+ printk(KERN_ERR PFX
+ "ignoring illegal change in lo freq table-%x to 0x%x\n",
data->currfid, fid);
return 1;
}
@@ -850,18 +865,20 @@
smp_processor_id(), fid, vid);
freqs.cpu = data->cpu;
-
freqs.old = find_khz_freq_from_fid(data->currfid);
freqs.new = find_khz_freq_from_fid(fid);
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ }
- down(&fidvid_sem);
res = transition_fid_vid(data, fid, vid);
- up(&fidvid_sem);
freqs.new = find_khz_freq_from_fid(data->currfid);
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
+ for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ }
return res;
}
@@ -874,6 +891,7 @@
u32 checkvid = data->currvid;
unsigned int newstate;
int ret = -EIO;
+ int i;
/* only run on specific CPU from here on */
oldmask = current->cpus_allowed;
@@ -902,22 +920,41 @@
data->currfid, data->currvid);
if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
- printk(KERN_ERR PFX
- "error - out of sync, fid 0x%x 0x%x, vid 0x%x 0x%x\n",
- checkfid, data->currfid, checkvid, data->currvid);
+ printk(KERN_INFO PFX
+ "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
+ checkfid, data->currfid, checkvid, data->currvid);
}
if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate))
goto err_out;
+ down(&fidvid_sem);
+
+ for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
+ /* make sure the sibling is initialized */
+ if (!powernow_data[i]) {
+ ret = 0;
+ up(&fidvid_sem);
+ goto err_out;
+ }
+ }
+
powernow_k8_acpi_pst_values(data, newstate);
if (transition_frequency(data, newstate)) {
printk(KERN_ERR PFX "transition frequency failed\n");
ret = 1;
+ up(&fidvid_sem);
goto err_out;
}
+ /* Update all the fid/vids of our siblings */
+ for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
+ powernow_data[i]->currvid = data->currvid;
+ powernow_data[i]->currfid = data->currfid;
+ }
+ up(&fidvid_sem);
+
pol->cur = find_khz_freq_from_fid(data->currfid);
ret = 0;
@@ -962,7 +999,7 @@
*/
if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) {
- printk(KERN_INFO PFX "MP systems not supported by PSB BIOS structure\n");
+ printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n");
kfree(data);
return -ENODEV;
}
@@ -1003,6 +1040,7 @@
schedule();
pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ pol->cpus = cpu_core_map[pol->cpu];
/* Take a crude guess here.
* That guess was in microseconds, so multiply with 1000 */
@@ -1069,7 +1107,7 @@
return 0;
}
preempt_disable();
-
+
if (query_current_values_with_pending_wait(data))
goto out;
@@ -1127,9 +1165,10 @@
cpufreq_unregister_driver(&cpufreq_amd64_driver);
}
-MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>");
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com.");
MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
MODULE_LICENSE("GPL");
late_initcall(powernowk8_init);
module_exit(powernowk8_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
index 63ebc84..9ed5bf2 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
@@ -174,3 +174,18 @@
static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
+
+#ifndef for_each_cpu_mask
+#define for_each_cpu_mask(i,mask) for (i=0;i<1;i++)
+#endif
+
+#ifdef CONFIG_SMP
+static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
+{
+}
+#else
+static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
+{
+ cpu_set(0, cpu_sharedcore_mask[0]);
+}
+#endif
diff --git a/arch/i386/kernel/cpu/cpufreq/sc520_freq.c b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c
new file mode 100644
index 0000000..ef457d5
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c
@@ -0,0 +1,186 @@
+/*
+ * sc520_freq.c: cpufreq driver for the AMD Elan sc520
+ *
+ * Copyright (C) 2005 Sean Young <sean@mess.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based on elanfreq.c
+ *
+ * 2005-03-30: - initial revision
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+#define MMCR_BASE 0xfffef000 /* The default base address */
+#define OFFS_CPUCTL 0x2 /* CPU Control Register */
+
+static __u8 __iomem *cpuctl;
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg)
+
+static struct cpufreq_frequency_table sc520_freq_table[] = {
+ {0x01, 100000},
+ {0x02, 133000},
+ {0, CPUFREQ_TABLE_END},
+};
+
+static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
+{
+ u8 clockspeed_reg = *cpuctl;
+
+ switch (clockspeed_reg & 0x03) {
+ default:
+ printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg);
+ case 0x01:
+ return 100000;
+ case 0x02:
+ return 133000;
+ }
+}
+
+static void sc520_freq_set_cpu_state (unsigned int state)
+{
+
+ struct cpufreq_freqs freqs;
+ u8 clockspeed_reg;
+
+ freqs.old = sc520_freq_get_cpu_frequency(0);
+ freqs.new = sc520_freq_table[state].frequency;
+ freqs.cpu = 0; /* AMD Elan is UP */
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ dprintk("attempting to set frequency to %i kHz\n",
+ sc520_freq_table[state].frequency);
+
+ local_irq_disable();
+
+ clockspeed_reg = *cpuctl & ~0x03;
+ *cpuctl = clockspeed_reg | sc520_freq_table[state].index;
+
+ local_irq_enable();
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+};
+
+static int sc520_freq_verify (struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]);
+}
+
+static int sc520_freq_target (struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int newstate = 0;
+
+ if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate))
+ return -EINVAL;
+
+ sc520_freq_set_cpu_state(newstate);
+
+ return 0;
+}
+
+
+/*
+ * Module init and exit code
+ */
+
+static int sc520_freq_cpu_init(struct cpufreq_policy *policy)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+ int result;
+
+ /* capability check */
+ if (c->x86_vendor != X86_VENDOR_AMD ||
+ c->x86 != 4 || c->x86_model != 9)
+ return -ENODEV;
+
+ /* cpuinfo and default policy values */
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.transition_latency = 1000000; /* 1ms */
+ policy->cur = sc520_freq_get_cpu_frequency(0);
+
+ result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table);
+ if (result)
+ return (result);
+
+ cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu);
+
+ return 0;
+}
+
+
+static int sc520_freq_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+
+static struct freq_attr* sc520_freq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+
+static struct cpufreq_driver sc520_freq_driver = {
+ .get = sc520_freq_get_cpu_frequency,
+ .verify = sc520_freq_verify,
+ .target = sc520_freq_target,
+ .init = sc520_freq_cpu_init,
+ .exit = sc520_freq_cpu_exit,
+ .name = "sc520_freq",
+ .owner = THIS_MODULE,
+ .attr = sc520_freq_attr,
+};
+
+
+static int __init sc520_freq_init(void)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+
+ /* Test if we have the right hardware */
+ if(c->x86_vendor != X86_VENDOR_AMD ||
+ c->x86 != 4 || c->x86_model != 9) {
+ dprintk("no Elan SC520 processor found!\n");
+ return -ENODEV;
+ }
+ cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
+ if(!cpuctl) {
+ printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
+ return -ENOMEM;
+ }
+
+ return cpufreq_register_driver(&sc520_freq_driver);
+}
+
+
+static void __exit sc520_freq_exit(void)
+{
+ cpufreq_unregister_driver(&sc520_freq_driver);
+ iounmap(cpuctl);
+}
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sean Young <sean@mess.org>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU");
+
+module_init(sc520_freq_init);
+module_exit(sc520_freq_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index 07d5612..7dcbf70 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -54,6 +54,8 @@
CPU_DOTHAN_A1,
CPU_DOTHAN_A2,
CPU_DOTHAN_B0,
+ CPU_MP4HT_D0,
+ CPU_MP4HT_E0,
};
static const struct cpu_id cpu_ids[] = {
@@ -61,6 +63,8 @@
[CPU_DOTHAN_A1] = { 6, 13, 1 },
[CPU_DOTHAN_A2] = { 6, 13, 2 },
[CPU_DOTHAN_B0] = { 6, 13, 6 },
+ [CPU_MP4HT_D0] = {15, 3, 4 },
+ [CPU_MP4HT_E0] = {15, 4, 1 },
};
#define N_IDS (sizeof(cpu_ids)/sizeof(cpu_ids[0]))
@@ -226,6 +230,8 @@
{ &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
{ &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
{ &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
+ { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL },
+ { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL },
{ NULL, }
};
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
index 8ba430a..d368b3f 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
@@ -336,7 +336,7 @@
if (!prev_speed)
return -EIO;
- dprintk("previous seped is %u\n", prev_speed);
+ dprintk("previous speed is %u\n", prev_speed);
local_irq_save(flags);
@@ -348,7 +348,7 @@
goto out;
}
- dprintk("low seped is %u\n", *low_speed);
+ dprintk("low speed is %u\n", *low_speed);
/* switch to high state */
set_state(SPEEDSTEP_HIGH);
@@ -358,7 +358,7 @@
goto out;
}
- dprintk("high seped is %u\n", *high_speed);
+ dprintk("high speed is %u\n", *high_speed);
if (*low_speed == *high_speed) {
ret = -ENODEV;
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
index 79440b3..b25fb6b 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
@@ -357,6 +357,9 @@
case SPEEDSTEP_PROCESSOR_PIII_C:
case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
break;
+ case SPEEDSTEP_PROCESSOR_P4M:
+ printk(KERN_INFO "speedstep-smi: you're trying to use this cpufreq driver on a Pentium 4-based CPU. Most likely it will not work.\n");
+ break;
default:
speedstep_processor = 0;
}
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
index aeb5b4e..a710dc4 100644
--- a/arch/i386/kernel/cpu/intel_cacheinfo.c
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -118,7 +118,7 @@
};
#define MAX_CACHE_LEAVES 4
-static unsigned short __devinitdata num_cache_leaves;
+static unsigned short num_cache_leaves;
static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
{
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 945ec73..2bfbdde 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -1502,11 +1502,13 @@
if (efi_enabled)
efi_map_memmap();
+#ifdef CONFIG_ACPI_BOOT
/*
* Parse the ACPI tables for possible boot-time SMP configuration.
*/
acpi_boot_table_init();
acpi_boot_init();
+#endif
#ifdef CONFIG_X86_LOCAL_APIC
if (smp_found_config)
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index cbea7ac..bc1bb69 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -888,6 +888,7 @@
cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned;
cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
+EXPORT_SYMBOL(cpu_core_map);
static void __init smp_boot_cpus(unsigned int max_cpus)
{
@@ -1073,8 +1074,10 @@
cpu_set(cpu, cpu_sibling_map[cpu]);
}
- if (siblings != smp_num_siblings)
+ if (siblings != smp_num_siblings) {
printk(KERN_WARNING "WARNING: %d siblings found for CPU%d, should be %d\n", siblings, cpu, smp_num_siblings);
+ smp_num_siblings = siblings;
+ }
if (c->x86_num_cores > 1) {
for (i = 0; i < NR_CPUS; i++) {
diff --git a/arch/i386/kernel/timers/common.c b/arch/i386/kernel/timers/common.c
index f7f9000..8e20121 100644
--- a/arch/i386/kernel/timers/common.c
+++ b/arch/i386/kernel/timers/common.c
@@ -6,6 +6,7 @@
#include <linux/timex.h>
#include <linux/errno.h>
#include <linux/jiffies.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <asm/timer.h>
@@ -24,7 +25,7 @@
#define CALIBRATE_TIME (5 * 1000020/HZ)
-unsigned long __init calibrate_tsc(void)
+unsigned long calibrate_tsc(void)
{
mach_prepare_counter();
@@ -139,7 +140,7 @@
#endif
/* calculate cpu_khz */
-void __init init_cpu_khz(void)
+void init_cpu_khz(void)
{
if (cpu_has_tsc) {
unsigned long tsc_quotient = calibrate_tsc();
@@ -158,3 +159,4 @@
}
}
}
+
diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
index 7926d96..180444d 100644
--- a/arch/i386/kernel/timers/timer_tsc.c
+++ b/arch/i386/kernel/timers/timer_tsc.c
@@ -320,6 +320,26 @@
static inline void cpufreq_delayed_get(void) { return; }
#endif
+int recalibrate_cpu_khz(void)
+{
+#ifndef CONFIG_SMP
+ unsigned long cpu_khz_old = cpu_khz;
+
+ if (cpu_has_tsc) {
+ init_cpu_khz();
+ cpu_data[0].loops_per_jiffy =
+ cpufreq_scale(cpu_data[0].loops_per_jiffy,
+ cpu_khz_old,
+ cpu_khz);
+ return 0;
+ } else
+ return -ENODEV;
+#else
+ return -ENODEV;
+#endif
+}
+EXPORT_SYMBOL(recalibrate_cpu_khz);
+
static void mark_offset_tsc(void)
{
unsigned long lost,delay;
diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c
index 903d739..a6e0ddd 100644
--- a/arch/i386/mach-voyager/voyager_smp.c
+++ b/arch/i386/mach-voyager/voyager_smp.c
@@ -97,7 +97,6 @@
static void vic_enable_cpi(void);
static void do_boot_cpu(__u8 cpuid);
static void do_quad_bootstrap(void);
-static inline void wrapper_smp_local_timer_interrupt(struct pt_regs *);
int hard_smp_processor_id(void);
@@ -126,6 +125,14 @@
}
static inline void
+wrapper_smp_local_timer_interrupt(struct pt_regs *regs)
+{
+ irq_enter();
+ smp_local_timer_interrupt(regs);
+ irq_exit();
+}
+
+static inline void
send_one_CPI(__u8 cpu, __u8 cpi)
{
if(voyager_quad_processors & (1<<cpu))
@@ -1249,14 +1256,6 @@
smp_local_timer_interrupt(regs);
}
-static inline void
-wrapper_smp_local_timer_interrupt(struct pt_regs *regs)
-{
- irq_enter();
- smp_local_timer_interrupt(regs);
- irq_exit();
-}
-
/* local (per CPU) timer interrupt. It does both profiling and
* process statistics/rescheduling.
*
diff --git a/arch/i386/mm/ioremap.c b/arch/i386/mm/ioremap.c
index db06f73..ab54279 100644
--- a/arch/i386/mm/ioremap.c
+++ b/arch/i386/mm/ioremap.c
@@ -238,19 +238,21 @@
addr < phys_to_virt(ISA_END_ADDRESS))
return;
- p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
+ write_lock(&vmlist_lock);
+ p = __remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
if (!p) {
- printk("__iounmap: bad address %p\n", addr);
- return;
+ printk("iounmap: bad address %p\n", addr);
+ goto out_unlock;
}
if ((p->flags >> 20) && p->phys_addr < virt_to_phys(high_memory) - 1) {
- /* p->size includes the guard page, but cpa doesn't like that */
change_page_attr(virt_to_page(__va(p->phys_addr)),
p->size >> PAGE_SHIFT,
PAGE_KERNEL);
global_flush_tlb();
}
+out_unlock:
+ write_unlock(&vmlist_lock);
kfree(p);
}
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
index be52c5a..8e8e895 100644
--- a/arch/i386/pci/fixup.c
+++ b/arch/i386/pci/fixup.c
@@ -253,7 +253,7 @@
#define MAX_PCIEROOT 6
static int quirk_aspm_offset[MAX_PCIEROOT << 3];
-#define GET_INDEX(a, b) (((a - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + b)
+#define GET_INDEX(a, b) ((((a) - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + ((b) & 7))
static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
{
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index d6598da..da21b1d 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -1029,7 +1029,6 @@
static int pirq_enable_irq(struct pci_dev *dev)
{
u8 pin;
- extern int via_interrupt_line_quirk;
struct pci_dev *temp_dev;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
@@ -1084,10 +1083,6 @@
printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
'A' + pin, pci_name(dev), msg);
}
- /* VIA bridges use interrupt line for apic/pci steering across
- the V-Link */
- else if (via_interrupt_line_quirk)
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq & 15);
return 0;
}
diff --git a/arch/ia64/ia32/ia32_ioctl.c b/arch/ia64/ia32/ia32_ioctl.c
index 9845dab..164b211 100644
--- a/arch/ia64/ia32/ia32_ioctl.c
+++ b/arch/ia64/ia32/ia32_ioctl.c
@@ -13,7 +13,6 @@
#define INCLUDES
#include "compat_ioctl.c"
-#include <asm/ioctl32.h>
#define IOCTL_NR(a) ((a) & ~(_IOC_SIZEMASK << _IOC_SIZESHIFT))
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 247a21c..c1e20d6 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -2427,7 +2427,7 @@
{
struct epoll_event *events64 = NULL;
mm_segment_t old_fs = get_fs();
- int error, numevents, size;
+ int numevents, size;
int evt_idx;
int do_free_pages = 0;
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 81c45d4..d99316c 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1182,7 +1182,7 @@
;;
(pNonSys) mov out2=0 // out2==0 => not a syscall
.fframe 16
- .spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!)
+ .spillsp ar.unat, 16
st8 [sp]=r9,-16 // allocate space for ar.unat and save it
st8 [out1]=loc1,-8 // save ar.pfs, out1=&sigscratch
.body
@@ -1208,7 +1208,7 @@
adds out2=8,sp // out2=&sigscratch->ar_pfs
;;
.fframe 16
- .spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!)
+ .spillsp ar.unat, 16
st8 [sp]=r9,-16 // allocate space for ar.unat and save it
st8 [out2]=loc1,-8 // save ar.pfs, out2=&sigscratch
.body
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 4d6c7b8f..736e328 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1103,8 +1103,6 @@
return IRQ_HANDLED;
}
-#endif /* CONFIG_ACPI */
-
/*
* ia64_mca_cpe_poll
*
@@ -1122,6 +1120,8 @@
platform_send_ipi(first_cpu(cpu_online_map), IA64_CPEP_VECTOR, IA64_IPI_DM_INT, 0);
}
+#endif /* CONFIG_ACPI */
+
/*
* C portion of the OS INIT handler
*
@@ -1390,8 +1390,7 @@
register_percpu_irq(IA64_MCA_WAKEUP_VECTOR, &mca_wkup_irqaction);
#ifdef CONFIG_ACPI
- /* Setup the CPEI/P vector and handler */
- cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI);
+ /* Setup the CPEI/P handler */
register_percpu_irq(IA64_CPEP_VECTOR, &mca_cpep_irqaction);
#endif
@@ -1436,6 +1435,7 @@
#ifdef CONFIG_ACPI
/* Setup the CPEI/P vector and handler */
+ cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI);
init_timer(&cpe_poll_timer);
cpe_poll_timer.function = ia64_mca_cpe_poll;
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index 1dbc7b2..f6d8a01 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -41,7 +41,7 @@
(pKStk) addl r3=THIS_CPU(ia64_mca_data),r3;; \
(pKStk) ld8 r3 = [r3];; \
(pKStk) addl r3=IA64_MCA_CPU_INIT_STACK_OFFSET,r3;; \
-(pKStk) addl sp=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \
+(pKStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \
(pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \
(pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of register backing store */ \
;; \
@@ -50,7 +50,6 @@
(pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \
(pUStk) dep r22=-1,r22,61,3; /* compute kernel virtual addr of RBS */ \
;; \
-(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \
(pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \
;; \
(pUStk) mov r18=ar.bsp; \
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 71c1016..6407bff 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -11,7 +11,7 @@
* Version Perfmon-2.x is a rewrite of perfmon-1.x
* by Stephane Eranian, Hewlett Packard Co.
*
- * Copyright (C) 1999-2003, 2005 Hewlett Packard Co
+ * Copyright (C) 1999-2005 Hewlett Packard Co
* Stephane Eranian <eranian@hpl.hp.com>
* David Mosberger-Tang <davidm@hpl.hp.com>
*
@@ -497,6 +497,9 @@
static pfm_stats_t pfm_stats[NR_CPUS];
static pfm_session_t pfm_sessions; /* global sessions information */
+static spinlock_t pfm_alt_install_check = SPIN_LOCK_UNLOCKED;
+static pfm_intr_handler_desc_t *pfm_alt_intr_handler;
+
static struct proc_dir_entry *perfmon_dir;
static pfm_uuid_t pfm_null_uuid = {0,};
@@ -606,6 +609,7 @@
DEFINE_PER_CPU(struct task_struct *, pmu_owner);
DEFINE_PER_CPU(pfm_context_t *, pmu_ctx);
DEFINE_PER_CPU(unsigned long, pmu_activation_number);
+EXPORT_PER_CPU_SYMBOL_GPL(pfm_syst_info);
/* forward declaration */
@@ -1325,7 +1329,7 @@
error_conflict:
DPRINT(("system wide not possible, conflicting session [%d] on CPU%d\n",
pfm_sessions.pfs_sys_session[cpu]->pid,
- smp_processor_id()));
+ cpu));
abort:
UNLOCK_PFS(flags);
@@ -5555,26 +5559,32 @@
int ret;
this_cpu = get_cpu();
- min = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min;
- max = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max;
+ if (likely(!pfm_alt_intr_handler)) {
+ min = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min;
+ max = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max;
- start_cycles = ia64_get_itc();
+ start_cycles = ia64_get_itc();
- ret = pfm_do_interrupt_handler(irq, arg, regs);
+ ret = pfm_do_interrupt_handler(irq, arg, regs);
- total_cycles = ia64_get_itc();
+ total_cycles = ia64_get_itc();
- /*
- * don't measure spurious interrupts
- */
- if (likely(ret == 0)) {
- total_cycles -= start_cycles;
+ /*
+ * don't measure spurious interrupts
+ */
+ if (likely(ret == 0)) {
+ total_cycles -= start_cycles;
- if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles;
- if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles;
+ if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles;
+ if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles;
- pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles;
+ pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles;
+ }
}
+ else {
+ (*pfm_alt_intr_handler->handler)(irq, arg, regs);
+ }
+
put_cpu_no_resched();
return IRQ_HANDLED;
}
@@ -6425,6 +6435,141 @@
.name = "perfmon"
};
+static void
+pfm_alt_save_pmu_state(void *data)
+{
+ struct pt_regs *regs;
+
+ regs = ia64_task_regs(current);
+
+ DPRINT(("called\n"));
+
+ /*
+ * should not be necessary but
+ * let's take not risk
+ */
+ pfm_clear_psr_up();
+ pfm_clear_psr_pp();
+ ia64_psr(regs)->pp = 0;
+
+ /*
+ * This call is required
+ * May cause a spurious interrupt on some processors
+ */
+ pfm_freeze_pmu();
+
+ ia64_srlz_d();
+}
+
+void
+pfm_alt_restore_pmu_state(void *data)
+{
+ struct pt_regs *regs;
+
+ regs = ia64_task_regs(current);
+
+ DPRINT(("called\n"));
+
+ /*
+ * put PMU back in state expected
+ * by perfmon
+ */
+ pfm_clear_psr_up();
+ pfm_clear_psr_pp();
+ ia64_psr(regs)->pp = 0;
+
+ /*
+ * perfmon runs with PMU unfrozen at all times
+ */
+ pfm_unfreeze_pmu();
+
+ ia64_srlz_d();
+}
+
+int
+pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl)
+{
+ int ret, i;
+ int reserve_cpu;
+
+ /* some sanity checks */
+ if (hdl == NULL || hdl->handler == NULL) return -EINVAL;
+
+ /* do the easy test first */
+ if (pfm_alt_intr_handler) return -EBUSY;
+
+ /* one at a time in the install or remove, just fail the others */
+ if (!spin_trylock(&pfm_alt_install_check)) {
+ return -EBUSY;
+ }
+
+ /* reserve our session */
+ for_each_online_cpu(reserve_cpu) {
+ ret = pfm_reserve_session(NULL, 1, reserve_cpu);
+ if (ret) goto cleanup_reserve;
+ }
+
+ /* save the current system wide pmu states */
+ ret = on_each_cpu(pfm_alt_save_pmu_state, NULL, 0, 1);
+ if (ret) {
+ DPRINT(("on_each_cpu() failed: %d\n", ret));
+ goto cleanup_reserve;
+ }
+
+ /* officially change to the alternate interrupt handler */
+ pfm_alt_intr_handler = hdl;
+
+ spin_unlock(&pfm_alt_install_check);
+
+ return 0;
+
+cleanup_reserve:
+ for_each_online_cpu(i) {
+ /* don't unreserve more than we reserved */
+ if (i >= reserve_cpu) break;
+
+ pfm_unreserve_session(NULL, 1, i);
+ }
+
+ spin_unlock(&pfm_alt_install_check);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pfm_install_alt_pmu_interrupt);
+
+int
+pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl)
+{
+ int i;
+ int ret;
+
+ if (hdl == NULL) return -EINVAL;
+
+ /* cannot remove someone else's handler! */
+ if (pfm_alt_intr_handler != hdl) return -EINVAL;
+
+ /* one at a time in the install or remove, just fail the others */
+ if (!spin_trylock(&pfm_alt_install_check)) {
+ return -EBUSY;
+ }
+
+ pfm_alt_intr_handler = NULL;
+
+ ret = on_each_cpu(pfm_alt_restore_pmu_state, NULL, 0, 1);
+ if (ret) {
+ DPRINT(("on_each_cpu() failed: %d\n", ret));
+ }
+
+ for_each_online_cpu(i) {
+ pfm_unreserve_session(NULL, 1, i);
+ }
+
+ spin_unlock(&pfm_alt_install_check);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pfm_remove_alt_pmu_interrupt);
+
/*
* perfmon initialization routine, called from the initcall() table
*/
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 907464e..08c8a5e 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -692,16 +692,30 @@
unsigned long cfm)
{
struct unw_frame_info info, prev_info;
- unsigned long ip, pr;
+ unsigned long ip, sp, pr;
unw_init_from_blocked_task(&info, child);
while (1) {
prev_info = info;
if (unw_unwind(&info) < 0)
return;
- if (unw_get_rp(&info, &ip) < 0)
+
+ unw_get_sp(&info, &sp);
+ if ((long)((unsigned long)child + IA64_STK_OFFSET - sp)
+ < IA64_PT_REGS_SIZE) {
+ dprintk("ptrace.%s: ran off the top of the kernel "
+ "stack\n", __FUNCTION__);
return;
- if (ip < FIXADDR_USER_END)
+ }
+ if (unw_get_pr (&prev_info, &pr) < 0) {
+ unw_get_rp(&prev_info, &ip);
+ dprintk("ptrace.%s: failed to read "
+ "predicate register (ip=0x%lx)\n",
+ __FUNCTION__, ip);
+ return;
+ }
+ if (unw_is_intr_frame(&info)
+ && (pr & (1UL << PRED_USER_STACK)))
break;
}
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 0d5ee57..3865f08 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -624,7 +624,7 @@
__u16 thread_id;
__u16 proc_fixed_addr;
__u8 valid;
-}mt_info[NR_CPUS] __devinit;
+} mt_info[NR_CPUS] __devinitdata;
#ifdef CONFIG_HOTPLUG_CPU
static inline void
diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c
index a8cf6d8..770fab3 100644
--- a/arch/ia64/kernel/sys_ia64.c
+++ b/arch/ia64/kernel/sys_ia64.c
@@ -182,13 +182,6 @@
}
}
- /*
- * A zero mmap always succeeds in Linux, independent of whether or not the
- * remaining arguments are valid.
- */
- if (len == 0)
- goto out;
-
/* Careful about overflows.. */
len = PAGE_ALIGN(len);
if (!len || len > TASK_SIZE) {
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 4fb4498..e64cb81 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -271,6 +271,8 @@
int major = sn_sal_rev_major(), minor = sn_sal_rev_minor();
extern void sn_cpu_init(void);
+ ia64_sn_plat_set_error_handling_features();
+
/*
* If the generic code has enabled vga console support - lets
* get rid of it again. This is a kludge for the fact that ACPI
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 2b6c9d3..c4a33f2 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -45,11 +45,13 @@
*/
void default_idle(void)
{
- while(1) {
- if (need_resched())
- __asm__("stop #0x2000" : : : "cc");
- schedule();
+ local_irq_disable();
+ while (!need_resched()) {
+ /* This stop will re-enable interrupts */
+ __asm__("stop #0x2000" : : : "cc");
+ local_irq_disable();
}
+ local_irq_enable();
}
void (*idle)(void) = default_idle;
@@ -63,7 +65,12 @@
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
- idle();
+ while (1) {
+ idle();
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
+ }
}
void machine_restart(char * __unused)
diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
index c5f1043..53166f3 100644
--- a/arch/mips/vr41xx/common/pmu.c
+++ b/arch/mips/vr41xx/common/pmu.c
@@ -1,7 +1,7 @@
/*
* pmu.c, Power Management Unit routines for NEC VR4100 series.
*
- * Copyright (C) 2003-2004 Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ * Copyright (C) 2003-2005 Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -17,7 +17,9 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/smp.h>
#include <linux/types.h>
@@ -27,20 +29,31 @@
#include <asm/reboot.h>
#include <asm/system.h>
-#define PMUCNT2REG KSEG1ADDR(0x0f0000c6)
+#define PMU_TYPE1_BASE 0x0b0000a0UL
+#define PMU_TYPE1_SIZE 0x0eUL
+
+#define PMU_TYPE2_BASE 0x0f0000c0UL
+#define PMU_TYPE2_SIZE 0x10UL
+
+#define PMUCNT2REG 0x06
#define SOFTRST 0x0010
+static void __iomem *pmu_base;
+
+#define pmu_read(offset) readw(pmu_base + (offset))
+#define pmu_write(offset, value) writew((value), pmu_base + (offset))
+
static inline void software_reset(void)
{
- uint16_t val;
+ uint16_t pmucnt2;
switch (current_cpu_data.cputype) {
case CPU_VR4122:
case CPU_VR4131:
case CPU_VR4133:
- val = readw(PMUCNT2REG);
- val |= SOFTRST;
- writew(val, PMUCNT2REG);
+ pmucnt2 = pmu_read(PMUCNT2REG);
+ pmucnt2 |= SOFTRST;
+ pmu_write(PMUCNT2REG, pmucnt2);
break;
default:
break;
@@ -71,6 +84,34 @@
static int __init vr41xx_pmu_init(void)
{
+ unsigned long start, size;
+
+ switch (current_cpu_data.cputype) {
+ case CPU_VR4111:
+ case CPU_VR4121:
+ start = PMU_TYPE1_BASE;
+ size = PMU_TYPE1_SIZE;
+ break;
+ case CPU_VR4122:
+ case CPU_VR4131:
+ case CPU_VR4133:
+ start = PMU_TYPE2_BASE;
+ size = PMU_TYPE2_SIZE;
+ break;
+ default:
+ printk("Unexpected CPU of NEC VR4100 series\n");
+ return -ENODEV;
+ }
+
+ if (request_mem_region(start, size, "PMU") == NULL)
+ return -EBUSY;
+
+ pmu_base = ioremap(start, size);
+ if (pmu_base == NULL) {
+ release_mem_region(start, size);
+ return -EBUSY;
+ }
+
_machine_restart = vr41xx_restart;
_machine_halt = vr41xx_halt;
_machine_power_off = vr41xx_power_off;
@@ -78,4 +119,4 @@
return 0;
}
-early_initcall(vr41xx_pmu_init);
+core_initcall(vr41xx_pmu_init);
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 600f23d..6e6377a 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -1143,12 +1143,12 @@
config PCI_8260
bool
- depends on PCI && 8260 && !8272
+ depends on PCI && 8260
default y
config 8260_PCI9
bool " Enable workaround for MPC826x erratum PCI 9"
- depends on PCI_8260
+ depends on PCI_8260 && !ADS8272
default y
choice
diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile
index f850fb0..c9ac5f5 100644
--- a/arch/ppc/boot/images/Makefile
+++ b/arch/ppc/boot/images/Makefile
@@ -22,7 +22,8 @@
$(obj)/uImage: $(obj)/vmlinux.gz
$(Q)rm -f $@
$(call if_changed,uimage)
- @echo ' Image: $@' $(if $(wildcard $@),'is ready','not made')
+ @echo -n ' Image: $@ '
+ @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi
# Files generated that shall be removed upon make clean
clean-files := sImage vmapus vmlinux* miboot* zImage* uImage
diff --git a/arch/ppc/configs/mpc8555_cds_defconfig b/arch/ppc/configs/mpc8555_cds_defconfig
index 728bd9e..15abebf 100644
--- a/arch/ppc/configs/mpc8555_cds_defconfig
+++ b/arch/ppc/configs/mpc8555_cds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc1
-# Thu Jan 20 01:25:35 2005
+# Linux kernel version: 2.6.12-rc4
+# Tue May 17 11:56:01 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
@@ -11,6 +11,7 @@
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
#
# Code maturity level options
@@ -18,6 +19,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -29,12 +31,14 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -44,6 +48,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -62,10 +67,12 @@
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_MATH_EMULATION=y
# CONFIG_CPU_FREQ is not set
CONFIG_PPC_GEN550=y
+# CONFIG_PM is not set
CONFIG_85xx=y
CONFIG_PPC_INDIRECT_PCI_BE=y
@@ -76,6 +83,7 @@
CONFIG_MPC8555_CDS=y
# CONFIG_MPC8560_ADS is not set
# CONFIG_SBC8560 is not set
+# CONFIG_STX_GP3 is not set
CONFIG_MPC8555=y
CONFIG_85xx_PCI2=y
@@ -90,6 +98,7 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ISA_DMA_API=y
#
# Bus options
@@ -105,10 +114,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
@@ -180,7 +185,59 @@
#
# ATA/ATAPI/MFM/RLL support
#
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
@@ -220,7 +277,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -370,14 +426,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -387,6 +435,13 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
# Character devices
#
# CONFIG_VT is not set
@@ -406,6 +461,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_CPM is not set
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -434,6 +490,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
CONFIG_I2C=y
@@ -456,11 +517,11 @@
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
@@ -483,7 +544,9 @@
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
@@ -494,9 +557,11 @@
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
@@ -506,10 +571,12 @@
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_M41T00 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -538,7 +605,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -548,13 +614,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -585,6 +647,10 @@
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -646,7 +712,6 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -698,7 +763,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
# CONFIG_KGDB_CONSOLE is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S
index 9b6a8e5..6c7ae60 100644
--- a/arch/ppc/kernel/head_44x.S
+++ b/arch/ppc/kernel/head_44x.S
@@ -330,8 +330,9 @@
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
- andis. r11, r10, 0x8000
- beq 3f
+ lis r11, TASK_SIZE@h
+ cmplw r10, r11
+ blt+ 3f
lis r11, swapper_pg_dir@h
ori r11, r11, swapper_pg_dir@l
@@ -464,8 +465,9 @@
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
- andis. r11, r10, 0x8000
- beq 3f
+ lis r11, TASK_SIZE@h
+ cmplw r10, r11
+ blt+ 3f
lis r11, swapper_pg_dir@h
ori r11, r11, swapper_pg_dir@l
@@ -533,8 +535,9 @@
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
- andis. r11, r10, 0x8000
- beq 3f
+ lis r11, TASK_SIZE@h
+ cmplw r10, r11
+ blt+ 3f
lis r11, swapper_pg_dir@h
ori r11, r11, swapper_pg_dir@l
diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S
index f22ddce..ce36e88 100644
--- a/arch/ppc/kernel/head_fsl_booke.S
+++ b/arch/ppc/kernel/head_fsl_booke.S
@@ -232,7 +232,8 @@
tlbwe
/* 7. Jump to KERNELBASE mapping */
- li r7,0
+ lis r7,MSR_KERNEL@h
+ ori r7,r7,MSR_KERNEL@l
bl 1f /* Find our address */
1: mflr r9
rlwimi r6,r9,0,20,31
@@ -293,6 +294,18 @@
mtspr SPRN_HID0, r2
#endif
+#if !defined(CONFIG_BDI_SWITCH)
+ /*
+ * The Abatron BDI JTAG debugger does not tolerate others
+ * mucking with the debug registers.
+ */
+ lis r2,DBCR0_IDM@h
+ mtspr SPRN_DBCR0,r2
+ /* clear any residual debug events */
+ li r2,-1
+ mtspr SPRN_DBSR,r2
+#endif
+
/*
* This is where the main kernel code starts.
*/
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 5dfb42f..5c20266 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -499,7 +499,7 @@
{
struct device_node *prom_stdout;
char *name;
- int offset;
+ int offset = 0;
if (of_stdout_device == NULL)
return -ENODEV;
@@ -753,6 +753,8 @@
strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
*cmdline_p = cmd_line;
+ parse_early_param();
+
/* set up the bootmem stuff with available memory */
do_init_bootmem();
if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c
index f8e7e32..c65731e 100644
--- a/arch/ppc/kernel/traps.c
+++ b/arch/ppc/kernel/traps.c
@@ -408,12 +408,7 @@
/* Early out if we are an invalid form of lswx */
if ((instword & INST_STRING_MASK) == INST_LSWX)
- if ((rA >= rT) || (NB_RB >= rT) || (rT == rA) || (rT == NB_RB))
- return -EINVAL;
-
- /* Early out if we are an invalid form of lswi */
- if ((instword & INST_STRING_MASK) == INST_LSWI)
- if ((rA >= rT) || (rT == rA))
+ if ((rT == rA) || (rT == NB_RB))
return -EINVAL;
EA = (rA == 0) ? 0 : regs->gpr[rA];
diff --git a/arch/ppc/lib/string.S b/arch/ppc/lib/string.S
index 8d08a2e..36c9b97 100644
--- a/arch/ppc/lib/string.S
+++ b/arch/ppc/lib/string.S
@@ -446,6 +446,7 @@
#ifdef CONFIG_8xx
/* Don't use prefetch on 8xx */
mtctr r0
+ li r0,0
53: COPY_16_BYTES_WITHEX(0)
bdnz 53b
@@ -564,7 +565,9 @@
/* or write fault in cacheline loop */
105: li r9,1
92: li r3,LG_CACHELINE_BYTES
- b 99f
+ mfctr r8
+ add r0,r0,r8
+ b 106f
/* read fault in final word loop */
108: li r9,0
b 93f
@@ -585,7 +588,7 @@
* r5 + (ctr << r3), and r9 is 0 for read or 1 for write.
*/
99: mfctr r0
- slw r3,r0,r3
+106: slw r3,r0,r3
add. r3,r3,r5
beq 120f /* shouldn't happen */
cmpwi 0,r9,0
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index be02a7f..363c157 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -179,6 +179,7 @@
if (!have_of)
FREESEC(openfirmware);
printk("\n");
+ ppc_md.progress = NULL;
#undef FREESEC
}
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c
index b3b0f51..e6348b5 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.c
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.c
@@ -127,7 +127,6 @@
{
/* we steal the lowest ioremap addr for virt space */
io_block_mapping(VIRT_IMMRBAR, immrbar, 1024*1024, _PAGE_IO);
- io_block_mapping(BCSR_VIRT_ADDR, BCSR_PHYS_ADDR, BCSR_SIZE, _PAGE_IO);
}
int
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h
index f4d055a..a2f6e49 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.h
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.h
@@ -26,9 +26,14 @@
#define VIRT_IMMRBAR ((uint)0xfe000000)
#define BCSR_PHYS_ADDR ((uint)0xf8000000)
-#define BCSR_VIRT_ADDR ((uint)0xfe100000)
#define BCSR_SIZE ((uint)(32 * 1024))
+#define BCSR_MISC_REG2_OFF 0x07
+#define BCSR_MISC_REG2_PORESET 0x01
+
+#define BCSR_MISC_REG3_OFF 0x08
+#define BCSR_MISC_REG3_CNFLOCK 0x80
+
#ifdef CONFIG_PCI
/* PCI interrupt controller */
#define PIRQA MPC83xx_IRQ_IRQ4
diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
index 4d857d6..583838a 100644
--- a/arch/ppc/platforms/85xx/mpc8540_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.c
@@ -210,6 +210,9 @@
#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
ppc_md.progress = gen550_progress;
#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+ ppc_md.early_serial_map = mpc85xx_early_serial_map;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
if (ppc_md.progress)
ppc_md.progress("mpc8540ads_init(): exit", 0);
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
index 6c020d6..e7cfa49 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
@@ -44,6 +44,7 @@
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/open_pic.h>
+#include <asm/i8259.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
@@ -181,6 +182,7 @@
mpc85xx_cds_init_IRQ(void)
{
bd_t *binfo = (bd_t *) __res;
+ int i;
/* Determine the Physical Address of the OpenPIC regs */
phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
@@ -198,6 +200,15 @@
*/
openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
+#ifdef CONFIG_PCI
+ openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq);
+
+ for (i = 0; i < NUM_8259_INTERRUPTS; i++)
+ irq_desc[i].handler = &i8259_pic;
+
+ i8259_init(0);
+#endif
+
#ifdef CONFIG_CPM2
/* Setup CPM2 PIC */
cpm2_init_IRQ();
@@ -231,7 +242,7 @@
* interrupt on slot */
{
{ 0, 1, 2, 3 }, /* 16 - PMC */
- { 3, 0, 0, 0 }, /* 17 P2P (Tsi320) */
+ { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
{ 0, 1, 2, 3 }, /* 18 - Slot 1 */
{ 1, 2, 3, 0 }, /* 19 - Slot 2 */
{ 2, 3, 0, 1 }, /* 20 - Slot 3 */
@@ -280,13 +291,135 @@
return PCIBIOS_DEVICE_NOT_FOUND;
#endif
/* We explicitly do not go past the Tundra 320 Bridge */
- if (bus == 1)
+ if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
return PCIBIOS_DEVICE_NOT_FOUND;
if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
return PCIBIOS_DEVICE_NOT_FOUND;
else
return PCIBIOS_SUCCESSFUL;
}
+
+void __init
+mpc85xx_cds_enable_via(struct pci_controller *hose)
+{
+ u32 pci_class;
+ u16 vid, did;
+
+ early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
+ if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
+ return;
+
+ /* Configure P2P so that we can reach bus 1 */
+ early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0);
+ early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1);
+ early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff);
+
+ early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
+ early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
+
+ if ((vid != PCI_VENDOR_ID_VIA) ||
+ (did != PCI_DEVICE_ID_VIA_82C686))
+ return;
+
+ /* Enable USB and IDE functions */
+ early_write_config_byte(hose, 1, 0x10, 0x48, 0x08);
+}
+
+void __init
+mpc85xx_cds_fixup_via(struct pci_controller *hose)
+{
+ u32 pci_class;
+ u16 vid, did;
+
+ early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
+ if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
+ return;
+
+ /*
+ * Force the backplane P2P bridge to have a window
+ * open from 0x00000000-0x00001fff in PCI I/O space.
+ * This allows legacy I/O (i8259, etc) on the VIA
+ * southbridge to be accessed.
+ */
+ early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00);
+ early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000);
+ early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10);
+ early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000);
+
+ early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
+ early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
+ if ((vid != PCI_VENDOR_ID_VIA) ||
+ (did != PCI_DEVICE_ID_VIA_82C686))
+ return;
+
+ /*
+ * Since the P2P window was forced to cover the fixed
+ * legacy I/O addresses, it is necessary to manually
+ * place the base addresses for the IDE and USB functions
+ * within this window.
+ */
+ /* Function 1, IDE */
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8);
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4);
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8);
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4);
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0);
+
+ /* Function 2, USB ports 0-1 */
+ early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0);
+
+ /* Function 3, USB ports 2-3 */
+ early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80);
+
+ /* Function 5, Power Management */
+ early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00);
+ early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc);
+ early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8);
+
+ /* Function 6, AC97 Interface */
+ early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00);
+}
+
+void __init
+mpc85xx_cds_pcibios_fixup(void)
+{
+ struct pci_dev *dev = NULL;
+ u_char c;
+
+ if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C586_1, NULL))) {
+ /*
+ * U-Boot does not set the enable bits
+ * for the IDE device. Force them on here.
+ */
+ pci_read_config_byte(dev, 0x40, &c);
+ c |= 0x03; /* IDE: Chip Enable Bits */
+ pci_write_config_byte(dev, 0x40, c);
+
+ /*
+ * Since only primary interface works, force the
+ * IDE function to standard primary IDE interrupt
+ * w/ 8259 offset
+ */
+ dev->irq = 14;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ }
+
+ /*
+ * Force legacy USB interrupt routing
+ */
+ if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C586_2, NULL))) {
+ dev->irq = 10;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10);
+ }
+
+ if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C586_2, dev))) {
+ dev->irq = 11;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
+ }
+}
#endif /* CONFIG_PCI */
TODC_ALLOC();
@@ -328,6 +461,9 @@
loops_per_jiffy = freq / HZ;
#ifdef CONFIG_PCI
+ /* VIA IDE configuration */
+ ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
+
/* setup PCI host bridges */
mpc85xx_setup_hose();
#endif
@@ -459,6 +595,9 @@
#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
ppc_md.progress = gen550_progress;
#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+ ppc_md.early_serial_map = mpc85xx_early_serial_map;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
if (ppc_md.progress)
ppc_md.progress("mpc85xx_cds_init(): exit", 0);
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
index 7627d77..12b292c 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
@@ -77,4 +77,7 @@
#define MPC85XX_PCI2_IO_SIZE 0x01000000
+#define NR_8259_INTS 16
+#define CPM_IRQ_OFFSET NR_8259_INTS
+
#endif /* __MACH_MPC85XX_CDS_H__ */
diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c
index 9ab05e5..7b9e154 100644
--- a/arch/ppc/platforms/85xx/sbc8560.c
+++ b/arch/ppc/platforms/85xx/sbc8560.c
@@ -221,6 +221,9 @@
#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
ppc_md.progress = gen550_progress;
#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+ ppc_md.early_serial_map = sbc8560_early_serial_map;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
if (ppc_md.progress)
ppc_md.progress("sbc8560_init(): exit", 0);
diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c
index f7fb278..937f46d 100644
--- a/arch/ppc/platforms/pmac_cpufreq.c
+++ b/arch/ppc/platforms/pmac_cpufreq.c
@@ -85,14 +85,11 @@
static int has_cpu_l2lve;
-#define PMAC_CPU_LOW_SPEED 1
-#define PMAC_CPU_HIGH_SPEED 0
-
/* There are only two frequency states for each processor. Values
* are in kHz for the time being.
*/
-#define CPUFREQ_HIGH PMAC_CPU_HIGH_SPEED
-#define CPUFREQ_LOW PMAC_CPU_LOW_SPEED
+#define CPUFREQ_HIGH 0
+#define CPUFREQ_LOW 1
static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
{CPUFREQ_HIGH, 0},
@@ -100,6 +97,11 @@
{0, CPUFREQ_TABLE_END},
};
+static struct freq_attr* pmac_cpu_freqs_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
static inline void local_delay(unsigned long ms)
{
if (no_schedule)
@@ -269,6 +271,8 @@
#ifdef DEBUG_FREQ
printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
#endif
+ pmu_suspend();
+
/* Disable all interrupt sources on openpic */
pic_prio = openpic_get_priority();
openpic_set_priority(0xf);
@@ -343,6 +347,8 @@
debug_calc_bogomips();
#endif
+ pmu_resume();
+
preempt_enable();
return 0;
@@ -355,7 +361,7 @@
static unsigned long prev_l3cr;
freqs.old = cur_freq;
- freqs.new = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq;
+ freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
freqs.cpu = smp_processor_id();
if (freqs.old == freqs.new)
@@ -363,7 +369,7 @@
if (notify)
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
- if (speed_mode == PMAC_CPU_LOW_SPEED &&
+ if (speed_mode == CPUFREQ_LOW &&
cpu_has_feature(CPU_FTR_L3CR)) {
l3cr = _get_L3CR();
if (l3cr & L3CR_L3E) {
@@ -371,8 +377,8 @@
_set_L3CR(0);
}
}
- set_speed_proc(speed_mode == PMAC_CPU_LOW_SPEED);
- if (speed_mode == PMAC_CPU_HIGH_SPEED &&
+ set_speed_proc(speed_mode == CPUFREQ_LOW);
+ if (speed_mode == CPUFREQ_HIGH &&
cpu_has_feature(CPU_FTR_L3CR)) {
l3cr = _get_L3CR();
if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
@@ -380,7 +386,7 @@
}
if (notify)
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- cur_freq = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq;
+ cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
return 0;
}
@@ -423,7 +429,8 @@
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = cur_freq;
- return cpufreq_frequency_table_cpuinfo(policy, &pmac_cpu_freqs[0]);
+ cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu);
+ return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs);
}
static u32 __pmac read_gpio(struct device_node *np)
@@ -457,7 +464,7 @@
no_schedule = 1;
sleep_freq = cur_freq;
if (cur_freq == low_freq)
- do_set_cpu_speed(PMAC_CPU_HIGH_SPEED, 0);
+ do_set_cpu_speed(CPUFREQ_HIGH, 0);
return 0;
}
@@ -473,8 +480,8 @@
* is that we force a switch to whatever it was, which is
* probably high speed due to our suspend() routine
*/
- do_set_cpu_speed(sleep_freq == low_freq ? PMAC_CPU_LOW_SPEED
- : PMAC_CPU_HIGH_SPEED, 0);
+ do_set_cpu_speed(sleep_freq == low_freq ?
+ CPUFREQ_LOW : CPUFREQ_HIGH, 0);
no_schedule = 0;
return 0;
@@ -488,6 +495,7 @@
.suspend = pmac_cpufreq_suspend,
.resume = pmac_cpufreq_resume,
.flags = CPUFREQ_PM_NO_WARN,
+ .attr = pmac_cpu_freqs_attr,
.name = "powermac",
.owner = THIS_MODULE,
};
diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h
index cf5e5dd..067d9a5 100644
--- a/arch/ppc/platforms/pq2ads.h
+++ b/arch/ppc/platforms/pq2ads.h
@@ -49,10 +49,10 @@
/* PCI interrupt controller */
#define PCI_INT_STAT_REG 0xF8200000
#define PCI_INT_MASK_REG 0xF8200004
-#define PIRQA (NR_SIU_INTS + 0)
-#define PIRQB (NR_SIU_INTS + 1)
-#define PIRQC (NR_SIU_INTS + 2)
-#define PIRQD (NR_SIU_INTS + 3)
+#define PIRQA (NR_CPM_INTS + 0)
+#define PIRQB (NR_CPM_INTS + 1)
+#define PIRQC (NR_CPM_INTS + 2)
+#define PIRQD (NR_CPM_INTS + 3)
/*
* PCI memory map definitions for MPC8266ADS-PCI.
@@ -68,28 +68,23 @@
* 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory
*/
-/* window for a PCI master to access MPC8266 memory */
-#define PCI_SLV_MEM_LOCAL 0x00000000 /* Local base */
-#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
+/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h
+ Here we should redefine what is unique for this board */
+#define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */
+#define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */
+#define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */
-/* window for the processor to access PCI memory with prefetching */
-#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
-#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
-#define PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */
+#define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */
+#define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */
-/* window for the processor to access PCI memory without prefetching */
-#define PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */
-#define PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */
-#define PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */
+#if defined(CONFIG_ADS8272)
+#define PCI_INT_TO_SIU SIU_INT_IRQ2
+#elif defined(CONFIG_PQ2FADS)
+#define PCI_INT_TO_SIU SIU_INT_IRQ6
+#else
+#warning PCI Bridge will be without interrupts support
+#endif
-/* window for the processor to access PCI I/O */
-#define PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */
-#define PCI_MSTR_IO_BUS 0x00000000 /* PCI base */
-#define PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */
-
-#define _IO_BASE PCI_MSTR_IO_LOCAL
-#define _ISA_MEM_BASE PCI_MSTR_MEMIO_LOCAL
-#define PCI_DRAM_OFFSET PCI_SLV_MEM_BUS
#endif /* CONFIG_PCI */
#endif /* __MACH_ADS8260_DEFS */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index dd418ea..96acf85 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -81,7 +81,7 @@
obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \
todc_time.o
obj-$(CONFIG_8260) += m8260_setup.o
-obj-$(CONFIG_PCI_8260) += m8260_pci.o indirect_pci.o
+obj-$(CONFIG_PCI_8260) += m82xx_pci.o indirect_pci.o pci_auto.o
obj-$(CONFIG_8260_PCI9) += m8260_pci_erratum9.o
obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o
ifeq ($(CONFIG_PPC_GEN550),y)
@@ -97,7 +97,7 @@
obj-$(CONFIG_40x) += dcr.o
obj-$(CONFIG_BOOKE) += dcr.o
obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \
- ppc_sys.o mpc85xx_sys.o \
+ ppc_sys.o i8259.o mpc85xx_sys.o \
mpc85xx_devices.o
ifeq ($(CONFIG_85xx),y)
obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o
diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c
index acb2cde..580ed65 100644
--- a/arch/ppc/syslib/ipic.c
+++ b/arch/ppc/syslib/ipic.c
@@ -479,7 +479,7 @@
temp = 0;
for (i = 0 ; i < senses_count ; i++) {
if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) {
- temp |= 1 << (16 - i);
+ temp |= 1 << (15 - i);
if (i != 0)
irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0;
else
diff --git a/arch/ppc/syslib/m8260_pci.c b/arch/ppc/syslib/m8260_pci.c
deleted file mode 100644
index 057cc3f..0000000
--- a/arch/ppc/syslib/m8260_pci.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004 Red Hat, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/immap_cpm2.h>
-#include <asm/mpc8260.h>
-
-#include "m8260_pci.h"
-
-
-/* PCI bus configuration registers.
- */
-
-static void __init m8260_setup_pci(struct pci_controller *hose)
-{
- volatile cpm2_map_t *immap = cpm2_immr;
- unsigned long pocmr;
- u16 tempShort;
-
-#ifndef CONFIG_ATC /* already done in U-Boot */
- /*
- * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
- * and local bus for PCI (SIUMCR [LBPC]).
- */
- immap->im_siu_conf.siu_82xx.sc_siumcr = 0x00640000;
-#endif
-
- /* Make PCI lowest priority */
- /* Each 4 bits is a device bus request and the MS 4bits
- is highest priority */
- /* Bus 4bit value
- --- ----------
- CPM high 0b0000
- CPM middle 0b0001
- CPM low 0b0010
- PCI reguest 0b0011
- Reserved 0b0100
- Reserved 0b0101
- Internal Core 0b0110
- External Master 1 0b0111
- External Master 2 0b1000
- External Master 3 0b1001
- The rest are reserved */
- immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
-
- /* Park bus on core while modifying PCI Bus accesses */
- immap->im_siu_conf.siu_82xx.sc_ppc_acr = 0x6;
-
- /*
- * Set up master window that allows the CPU to access PCI space. This
- * window is set up using the first SIU PCIBR registers.
- */
- immap->im_memctl.memc_pcimsk0 = MPC826x_PCI_MASK;
- immap->im_memctl.memc_pcibr0 = MPC826x_PCI_BASE | PCIBR_ENABLE;
-
- /* Disable machine check on no response or target abort */
- immap->im_pci.pci_emr = cpu_to_le32(0x1fe7);
- /* Release PCI RST (by default the PCI RST signal is held low) */
- immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
-
- /* give it some time */
- mdelay(1);
-
- /*
- * Set up master window that allows the CPU to access PCI Memory (prefetch)
- * space. This window is set up using the first set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar0 = cpu_to_le32(MPC826x_PCI_LOWER_MEM >> 12);
- immap->im_pci.pci_pobar0 = cpu_to_le32((MPC826x_PCI_LOWER_MEM - MPC826x_PCI_MEM_OFFSET) >> 12);
- pocmr = ((MPC826x_PCI_UPPER_MEM - MPC826x_PCI_LOWER_MEM) >> 12) ^ 0xfffff;
- immap->im_pci.pci_pocmr0 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PREFETCH_EN);
-
- /*
- * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
- * space. This window is set up using the second set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar1 = cpu_to_le32(MPC826x_PCI_LOWER_MMIO >> 12);
- immap->im_pci.pci_pobar1 = cpu_to_le32((MPC826x_PCI_LOWER_MMIO - MPC826x_PCI_MMIO_OFFSET) >> 12);
- pocmr = ((MPC826x_PCI_UPPER_MMIO - MPC826x_PCI_LOWER_MMIO) >> 12) ^ 0xfffff;
- immap->im_pci.pci_pocmr1 = cpu_to_le32(pocmr | POCMR_ENABLE);
-
- /*
- * Set up master window that allows the CPU to access PCI IO space. This window
- * is set up using the third set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar2 = cpu_to_le32(MPC826x_PCI_IO_BASE >> 12);
- immap->im_pci.pci_pobar2 = cpu_to_le32(MPC826x_PCI_LOWER_IO >> 12);
- pocmr = ((MPC826x_PCI_UPPER_IO - MPC826x_PCI_LOWER_IO) >> 12) ^ 0xfffff;
- immap->im_pci.pci_pocmr2 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PCI_IO);
-
- /*
- * Set up slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
-
- immap->im_pci.pci_pitar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_LOCAL >> 12);
- immap->im_pci.pci_pibar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_BUS >> 12);
- pocmr = ((MPC826x_PCI_SLAVE_MEM_SIZE-1) >> 12) ^ 0xfffff;
- immap->im_pci.pci_picmr0 = cpu_to_le32(pocmr | PICMR_ENABLE | PICMR_PREFETCH_EN);
-
- /* See above for description - puts PCI request as highest priority */
- immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
-
- /* Park the bus on the PCI */
- immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
-
- /* Host mode - specify the bridge as a host-PCI bridge */
- early_write_config_word(hose, 0, 0, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_HOST);
-
- /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
- early_read_config_word(hose, 0, 0, PCI_COMMAND, &tempShort);
- early_write_config_word(hose, 0, 0, PCI_COMMAND,
- tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-}
-
-void __init m8260_find_bridges(void)
-{
- extern int pci_assign_all_busses;
- struct pci_controller * hose;
-
- pci_assign_all_busses = 1;
-
- hose = pcibios_alloc_controller();
-
- if (!hose)
- return;
-
- ppc_md.pci_swizzle = common_swizzle;
-
- hose->first_busno = 0;
- hose->bus_offset = 0;
- hose->last_busno = 0xff;
-
- setup_m8260_indirect_pci(hose,
- (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
- (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
-
- m8260_setup_pci(hose);
- hose->pci_mem_offset = MPC826x_PCI_MEM_OFFSET;
-
- hose->io_base_virt = ioremap(MPC826x_PCI_IO_BASE,
- MPC826x_PCI_IO_SIZE);
- isa_io_base = (unsigned long) hose->io_base_virt;
-
- /* setup resources */
- pci_init_resource(&hose->mem_resources[0],
- MPC826x_PCI_LOWER_MEM,
- MPC826x_PCI_UPPER_MEM,
- IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
-
- pci_init_resource(&hose->mem_resources[1],
- MPC826x_PCI_LOWER_MMIO,
- MPC826x_PCI_UPPER_MMIO,
- IORESOURCE_MEM, "PCI memory");
-
- pci_init_resource(&hose->io_resource,
- MPC826x_PCI_LOWER_IO,
- MPC826x_PCI_UPPER_IO,
- IORESOURCE_IO, "PCI I/O");
-}
diff --git a/arch/ppc/syslib/m8260_pci.h b/arch/ppc/syslib/m8260_pci.h
deleted file mode 100644
index d1352120..0000000
--- a/arch/ppc/syslib/m8260_pci.h
+++ /dev/null
@@ -1,76 +0,0 @@
-
-#ifndef _PPC_KERNEL_M8260_PCI_H
-#define _PPC_KERNEL_M8260_PCI_H
-
-#include <asm/m8260_pci.h>
-
-/*
- * Local->PCI map (from CPU) controlled by
- * MPC826x master window
- *
- * 0x80000000 - 0xBFFFFFFF Total CPU2PCI space PCIBR0
- *
- * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1)
- * 0xA0000000 - 0xAFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2)
- * 0xB0000000 - 0xB0FFFFFF 32-bit PCI IO (Outbound ATU #3)
- *
- * PCI->Local map (from PCI)
- * MPC826x slave window controlled by
- *
- * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1)
- */
-
-/*
- * Slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
-
-#ifndef MPC826x_PCI_SLAVE_MEM_LOCAL
-#define MPC826x_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart)
-#define MPC826x_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart)
-#define MPC826x_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize)
-#endif
-
-/*
- * This is the window that allows the CPU to access PCI address space.
- * It will be setup with the SIU PCIBR0 register. All three PCI master
- * windows, which allow the CPU to access PCI prefetch, non prefetch,
- * and IO space (see below), must all fit within this window.
- */
-#ifndef MPC826x_PCI_BASE
-#define MPC826x_PCI_BASE 0x80000000
-#define MPC826x_PCI_MASK 0xc0000000
-#endif
-
-#ifndef MPC826x_PCI_LOWER_MEM
-#define MPC826x_PCI_LOWER_MEM 0x80000000
-#define MPC826x_PCI_UPPER_MEM 0x9fffffff
-#define MPC826x_PCI_MEM_OFFSET 0x00000000
-#endif
-
-#ifndef MPC826x_PCI_LOWER_MMIO
-#define MPC826x_PCI_LOWER_MMIO 0xa0000000
-#define MPC826x_PCI_UPPER_MMIO 0xafffffff
-#define MPC826x_PCI_MMIO_OFFSET 0x00000000
-#endif
-
-#ifndef MPC826x_PCI_LOWER_IO
-#define MPC826x_PCI_LOWER_IO 0x00000000
-#define MPC826x_PCI_UPPER_IO 0x00ffffff
-#define MPC826x_PCI_IO_BASE 0xb0000000
-#define MPC826x_PCI_IO_SIZE 0x01000000
-#endif
-
-#ifndef _IO_BASE
-#define _IO_BASE isa_io_base
-#endif
-
-#ifdef CONFIG_8260_PCI9
-struct pci_controller;
-extern void setup_m8260_indirect_pci(struct pci_controller* hose,
- u32 cfg_addr, u32 cfg_data);
-#else
-#define setup_m8260_indirect_pci setup_indirect_pci
-#endif
-
-#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c
index 9c0582d..1dc7e4e 100644
--- a/arch/ppc/syslib/m8260_pci_erratum9.c
+++ b/arch/ppc/syslib/m8260_pci_erratum9.c
@@ -31,7 +31,7 @@
#include <asm/immap_cpm2.h>
#include <asm/cpm2.h>
-#include "m8260_pci.h"
+#include "m82xx_pci.h"
#ifdef CONFIG_8260_PCI9
/*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */
@@ -248,11 +248,11 @@
static inline int is_pci_mem(unsigned long addr)
{
- if (addr >= MPC826x_PCI_LOWER_MMIO &&
- addr <= MPC826x_PCI_UPPER_MMIO)
+ if (addr >= M82xx_PCI_LOWER_MMIO &&
+ addr <= M82xx_PCI_UPPER_MMIO)
return 1;
- if (addr >= MPC826x_PCI_LOWER_MEM &&
- addr <= MPC826x_PCI_UPPER_MEM)
+ if (addr >= M82xx_PCI_LOWER_MEM &&
+ addr <= M82xx_PCI_UPPER_MEM)
return 1;
return 0;
}
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c
index 23ea3f6..fda75d7 100644
--- a/arch/ppc/syslib/m8260_setup.c
+++ b/arch/ppc/syslib/m8260_setup.c
@@ -34,7 +34,8 @@
unsigned char __res[sizeof(bd_t)];
extern void cpm2_reset(void);
-extern void m8260_find_bridges(void);
+extern void pq2_find_bridges(void);
+extern void pq2pci_init_irq(void);
extern void idma_pci9_init(void);
/* Place-holder for board-specific init */
@@ -56,7 +57,7 @@
idma_pci9_init();
#endif
#ifdef CONFIG_PCI_8260
- m8260_find_bridges();
+ pq2_find_bridges();
#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
@@ -173,6 +174,12 @@
* in case the boot rom changed something on us.
*/
cpm2_immr->im_intctl.ic_siprr = 0x05309770;
+
+#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS))
+ /* Initialize stuff for the 82xx CPLD IC and install demux */
+ pq2pci_init_irq();
+#endif
+
}
/*
diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c
new file mode 100644
index 0000000..5e7a7ed
--- /dev/null
+++ b/arch/ppc/syslib/m82xx_pci.c
@@ -0,0 +1,383 @@
+/*
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004 Red Hat, Inc.
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+#include <asm/cpm2.h>
+
+#include "m82xx_pci.h"
+
+/*
+ * Interrupt routing
+ */
+
+static inline int
+pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */
+ { PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */
+ { PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */
+ };
+
+ const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void
+pq2pci_mask_irq(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
+ return;
+}
+
+static void
+pq2pci_unmask_irq(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
+ return;
+}
+
+static void
+pq2pci_mask_and_ack(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
+ return;
+}
+
+static void
+pq2pci_end_irq(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
+ return;
+}
+
+struct hw_interrupt_type pq2pci_ic = {
+ "PQ2 PCI",
+ NULL,
+ NULL,
+ pq2pci_unmask_irq,
+ pq2pci_mask_irq,
+ pq2pci_mask_and_ack,
+ pq2pci_end_irq,
+ 0
+};
+
+static irqreturn_t
+pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long stat, mask, pend;
+ int bit;
+
+ for(;;) {
+ stat = *(volatile unsigned long *) PCI_INT_STAT_REG;
+ mask = *(volatile unsigned long *) PCI_INT_MASK_REG;
+ pend = stat & ~mask & 0xf0000000;
+ if (!pend)
+ break;
+ for (bit = 0; pend != 0; ++bit, pend <<= 1) {
+ if (pend & 0x80000000)
+ __do_IRQ(NR_CPM_INTS + bit, regs);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction pq2pci_irqaction = {
+ .handler = pq2pci_irq_demux,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "PQ2 PCI cascade",
+};
+
+
+void
+pq2pci_init_irq(void)
+{
+ int irq;
+ volatile cpm2_map_t *immap = cpm2_immr;
+#if defined CONFIG_ADS8272
+ /* configure chip select for PCI interrupt controller */
+ immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801;
+ immap->im_memctl.memc_or3 = 0xffff8010;
+#elif defined CONFIG_PQ2FADS
+ immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801;
+ immap->im_memctl.memc_or8 = 0xffff8010;
+#endif
+ for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
+ irq_desc[irq].handler = &pq2pci_ic;
+
+ /* make PCI IRQ level sensitive */
+ immap->im_intctl.ic_siexr &=
+ ~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1)));
+
+ /* mask all PCI interrupts */
+ *(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000;
+
+ /* install the demultiplexer for the PCI cascade interrupt */
+ setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction);
+ return;
+}
+
+static int
+pq2pci_exclude_device(u_char bus, u_char devfn)
+{
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/* PCI bus configuration registers.
+ */
+static void
+pq2ads_setup_pci(struct pci_controller *hose)
+{
+ __u32 val;
+ volatile cpm2_map_t *immap = cpm2_immr;
+ bd_t* binfo = (bd_t*) __res;
+ u32 sccr = immap->im_clkrst.car_sccr;
+ uint pci_div,freq,time;
+ /* PCI int lowest prio */
+ /* Each 4 bits is a device bus request and the MS 4bits
+ is highest priority */
+ /* Bus 4bit value
+ --- ----------
+ CPM high 0b0000
+ CPM middle 0b0001
+ CPM low 0b0010
+ PCI reguest 0b0011
+ Reserved 0b0100
+ Reserved 0b0101
+ Internal Core 0b0110
+ External Master 1 0b0111
+ External Master 2 0b1000
+ External Master 3 0b1001
+ The rest are reserved
+ */
+ immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
+ /* park bus on core */
+ immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE;
+ /*
+ * Set up master windows that allow the CPU to access PCI space. These
+ * windows are set up using the two SIU PCIBR registers.
+ */
+
+ immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE;
+ immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE;
+
+#ifdef M82xx_PCI_SEC_WND_SIZE
+ immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE;
+ immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
+#endif
+
+#if defined CONFIG_ADS8272
+ immap->im_siu_conf.siu_82xx.sc_siumcr =
+ (immap->im_siu_conf.siu_82xx.sc_siumcr &
+ ~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE |
+ SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 |
+ SIUMCR_LBPC11 | SIUMCR_APPC11 |
+ SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) |
+ SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 |
+ SIUMCR_APPC10 | SIUMCR_CS10PC00 |
+ SIUMCR_BCTLC00 | SIUMCR_MMR11 ;
+
+#elif defined CONFIG_PQ2FADS
+ /*
+ * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
+ * and local bus for PCI (SIUMCR [LBPC]).
+ */
+ immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
+ ~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) |
+ SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10;
+#endif
+ /* Enable PCI */
+ immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
+
+ pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
+ ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
+ freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
+ time = (int)666666/freq;
+ /* due to PCI Local Bus spec, some devices needs to wait such a long
+ time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
+ printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
+ (time==1) ? "0.5 seconds":"1 second" );
+
+ {
+ int i;
+ for(i=0;i<(500*time);i++)
+ udelay(1000);
+ }
+
+ /* setup ATU registers */
+ immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO |
+ ((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT));
+ immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT);
+ immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT);
+
+ /* Set-up non-prefetchable window */
+ immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT));
+ immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT);
+ immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT);
+
+ /* Set-up prefetchable window */
+ immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN |
+ (~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT));
+ immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT);
+ immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT);
+
+ /* Inbound transactions from PCI memory space */
+ immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN |
+ ((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT));
+ immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT);
+ immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
+
+#if defined CONFIG_ADS8272
+ /* PCI int highest prio */
+ immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745;
+#elif defined CONFIG_PQ2FADS
+ immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
+#endif
+ /* park bus on PCI */
+ immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
+
+ /* Enable bus mastering and inbound memory transactions */
+ early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val);
+ val &= 0xffff0000;
+ val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
+ early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val);
+
+}
+
+void __init pq2_find_bridges(void)
+{
+ extern int pci_assign_all_busses;
+ struct pci_controller * hose;
+ int host_bridge;
+
+ pci_assign_all_busses = 1;
+
+ hose = pcibios_alloc_controller();
+
+ if (!hose)
+ return;
+
+ ppc_md.pci_swizzle = common_swizzle;
+
+ hose->first_busno = 0;
+ hose->bus_offset = 0;
+ hose->last_busno = 0xff;
+
+#ifdef CONFIG_ADS8272
+ hose->set_cfg_type = 1;
+#endif
+
+ setup_m8260_indirect_pci(hose,
+ (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
+ (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
+
+ /* Make sure it is a supported bridge */
+ early_read_config_dword(hose,
+ 0,
+ PCI_DEVFN(0,0),
+ PCI_VENDOR_ID,
+ &host_bridge);
+ switch (host_bridge) {
+ case PCI_DEVICE_ID_MPC8265:
+ break;
+ case PCI_DEVICE_ID_MPC8272:
+ break;
+ default:
+ printk("Attempting to use unrecognized host bridge ID"
+ " 0x%08x.\n", host_bridge);
+ break;
+ }
+
+ pq2ads_setup_pci(hose);
+
+ hose->io_space.start = M82xx_PCI_LOWER_IO;
+ hose->io_space.end = M82xx_PCI_UPPER_IO;
+ hose->mem_space.start = M82xx_PCI_LOWER_MEM;
+ hose->mem_space.end = M82xx_PCI_UPPER_MMIO;
+ hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET;
+
+ isa_io_base =
+ (unsigned long) ioremap(M82xx_PCI_IO_BASE,
+ M82xx_PCI_IO_SIZE);
+ hose->io_base_virt = (void *) isa_io_base;
+
+ /* setup resources */
+ pci_init_resource(&hose->mem_resources[0],
+ M82xx_PCI_LOWER_MEM,
+ M82xx_PCI_UPPER_MEM,
+ IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
+
+ pci_init_resource(&hose->mem_resources[1],
+ M82xx_PCI_LOWER_MMIO,
+ M82xx_PCI_UPPER_MMIO,
+ IORESOURCE_MEM, "PCI memory");
+
+ pci_init_resource(&hose->io_resource,
+ M82xx_PCI_LOWER_IO,
+ M82xx_PCI_UPPER_IO,
+ IORESOURCE_IO | 1, "PCI I/O");
+
+ ppc_md.pci_exclude_device = pq2pci_exclude_device;
+ hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+ ppc_md.pci_map_irq = pq2pci_map_irq;
+ ppc_md.pcibios_fixup = NULL;
+ ppc_md.pcibios_fixup_bus = NULL;
+
+}
diff --git a/arch/ppc/syslib/m82xx_pci.h b/arch/ppc/syslib/m82xx_pci.h
new file mode 100644
index 0000000..924f73f
--- /dev/null
+++ b/arch/ppc/syslib/m82xx_pci.h
@@ -0,0 +1,92 @@
+
+#ifndef _PPC_KERNEL_M82XX_PCI_H
+#define _PPC_KERNEL_M82XX_PCI_H
+
+#include <asm/m8260_pci.h>
+/*
+ * Local->PCI map (from CPU) controlled by
+ * MPC826x master window
+ *
+ * 0xF6000000 - 0xF7FFFFFF IO space
+ * 0x80000000 - 0xBFFFFFFF CPU2PCI memory space PCIBR0
+ *
+ * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1)
+ * 0xA0000000 - 0xBFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2)
+ * 0xF6000000 - 0xF7FFFFFF 32-bit PCI IO (Outbound ATU #3)
+ *
+ * PCI->Local map (from PCI)
+ * MPC826x slave window controlled by
+ *
+ * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1)
+ */
+
+/*
+ * Slave window that allows PCI masters to access MPC826x local memory.
+ * This window is set up using the first set of Inbound ATU registers
+ */
+
+#ifndef M82xx_PCI_SLAVE_MEM_LOCAL
+#define M82xx_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart)
+#define M82xx_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart)
+#define M82xx_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize)
+#endif
+
+/*
+ * This is the window that allows the CPU to access PCI address space.
+ * It will be setup with the SIU PCIBR0 register. All three PCI master
+ * windows, which allow the CPU to access PCI prefetch, non prefetch,
+ * and IO space (see below), must all fit within this window.
+ */
+
+#ifndef M82xx_PCI_LOWER_MEM
+#define M82xx_PCI_LOWER_MEM 0x80000000
+#define M82xx_PCI_UPPER_MEM 0x9fffffff
+#define M82xx_PCI_MEM_OFFSET 0x00000000
+#define M82xx_PCI_MEM_SIZE 0x20000000
+#endif
+
+#ifndef M82xx_PCI_LOWER_MMIO
+#define M82xx_PCI_LOWER_MMIO 0xa0000000
+#define M82xx_PCI_UPPER_MMIO 0xafffffff
+#define M82xx_PCI_MMIO_OFFSET 0x00000000
+#define M82xx_PCI_MMIO_SIZE 0x20000000
+#endif
+
+#ifndef M82xx_PCI_LOWER_IO
+#define M82xx_PCI_LOWER_IO 0x00000000
+#define M82xx_PCI_UPPER_IO 0x01ffffff
+#define M82xx_PCI_IO_BASE 0xf6000000
+#define M82xx_PCI_IO_SIZE 0x02000000
+#endif
+
+#ifndef M82xx_PCI_PRIM_WND_SIZE
+#define M82xx_PCI_PRIM_WND_SIZE ~(M82xx_PCI_IO_SIZE - 1U)
+#define M82xx_PCI_PRIM_WND_BASE (M82xx_PCI_IO_BASE)
+#endif
+
+#ifndef M82xx_PCI_SEC_WND_SIZE
+#define M82xx_PCI_SEC_WND_SIZE ~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U)
+#define M82xx_PCI_SEC_WND_BASE (M82xx_PCI_LOWER_MEM)
+#endif
+
+#ifndef POTA_ADDR_SHIFT
+#define POTA_ADDR_SHIFT 12
+#endif
+
+#ifndef PITA_ADDR_SHIFT
+#define PITA_ADDR_SHIFT 12
+#endif
+
+#ifndef _IO_BASE
+#define _IO_BASE isa_io_base
+#endif
+
+#ifdef CONFIG_8260_PCI9
+struct pci_controller;
+extern void setup_m8260_indirect_pci(struct pci_controller* hose,
+ u32 cfg_addr, u32 cfg_data);
+#else
+#define setup_m8260_indirect_pci setup_indirect_pci
+#endif
+
+#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c
index 5c1a919e..75c8e98 100644
--- a/arch/ppc/syslib/mpc83xx_devices.c
+++ b/arch/ppc/syslib/mpc83xx_devices.c
@@ -61,6 +61,7 @@
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
},
+ { },
};
struct platform_device ppc_sys_platform_devices[] = {
diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c
index a231795..1e658ef 100644
--- a/arch/ppc/syslib/mpc85xx_devices.c
+++ b/arch/ppc/syslib/mpc85xx_devices.c
@@ -61,6 +61,7 @@
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ,
},
+ { },
};
struct platform_device ppc_sys_platform_devices[] = {
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
index 7619e16..000ba47 100644
--- a/arch/ppc/syslib/open_pic.c
+++ b/arch/ppc/syslib/open_pic.c
@@ -275,7 +275,7 @@
}
#endif
-#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PM)
+#if defined(CONFIG_EPIC_SERIAL_MODE)
static void openpic_reset(void)
{
openpic_setfield(&OpenPIC->Global.Global_Configuration0,
@@ -557,12 +557,10 @@
*/
void openpic_cause_IPI(u_int ipi, cpumask_t cpumask)
{
- cpumask_t phys;
DECL_THIS_CPU;
CHECK_THIS_CPU;
check_arg_ipi(ipi);
- phys = physmask(cpumask);
openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi),
cpus_addr(physmask(cpumask))[0]);
}
@@ -995,8 +993,6 @@
return 0;
}
- openpic_reset();
-
/* OpenPIC sometimes seem to need some time to be fully back up... */
do {
openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c
index c28f9d6..843cf88 100644
--- a/arch/ppc/syslib/ppc83xx_setup.c
+++ b/arch/ppc/syslib/ppc83xx_setup.c
@@ -29,6 +29,7 @@
#include <asm/mmu.h>
#include <asm/ppc_sys.h>
#include <asm/kgdb.h>
+#include <asm/delay.h>
#include <syslib/ppc83xx_setup.h>
@@ -117,7 +118,34 @@
void
mpc83xx_restart(char *cmd)
{
+ volatile unsigned char __iomem *reg;
+ unsigned char tmp;
+
+ reg = ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
+
local_irq_disable();
+
+ /*
+ * Unlock the BCSR bits so a PRST will update the contents.
+ * Otherwise the reset asserts but doesn't clear.
+ */
+ tmp = in_8(reg + BCSR_MISC_REG3_OFF);
+ tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */
+ out_8(reg + BCSR_MISC_REG3_OFF, tmp);
+
+ /*
+ * Trigger a reset via a low->high transition of the
+ * PORESET bit.
+ */
+ tmp = in_8(reg + BCSR_MISC_REG2_OFF);
+ tmp &= ~BCSR_MISC_REG2_PORESET;
+ out_8(reg + BCSR_MISC_REG2_OFF, tmp);
+
+ udelay(1);
+
+ tmp |= BCSR_MISC_REG2_PORESET;
+ out_8(reg + BCSR_MISC_REG2_OFF, tmp);
+
for(;;);
}
diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
index 152c3ef..f3277f4 100644
--- a/arch/ppc/syslib/ppc85xx_setup.c
+++ b/arch/ppc/syslib/ppc85xx_setup.c
@@ -132,6 +132,12 @@
}
#ifdef CONFIG_PCI
+
+#if defined(CONFIG_MPC8555_CDS)
+extern void mpc85xx_cds_enable_via(struct pci_controller *hose);
+extern void mpc85xx_cds_fixup_via(struct pci_controller *hose);
+#endif
+
static void __init
mpc85xx_setup_pci1(struct pci_controller *hose)
{
@@ -302,8 +308,18 @@
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+#if defined(CONFIG_MPC8555_CDS)
+ /* Pre pciauto_bus_scan VIA init */
+ mpc85xx_cds_enable_via(hose_a);
+#endif
+
hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
+#if defined(CONFIG_MPC8555_CDS)
+ /* Post pciauto_bus_scan VIA fixup */
+ mpc85xx_cds_fixup_via(hose_a);
+#endif
+
#ifdef CONFIG_85xx_PCI2
hose_b = pcibios_alloc_controller();
diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c
index 2cee871..7f15136 100644
--- a/arch/ppc/syslib/prom_init.c
+++ b/arch/ppc/syslib/prom_init.c
@@ -626,8 +626,18 @@
l = call_prom("package-to-path", 3, 1, node,
mem_start, mem_end - mem_start);
if (l >= 0) {
+ char *p, *ep;
+
np->full_name = PTRUNRELOC((char *) mem_start);
*(char *)(mem_start + l) = 0;
+ /* Fixup an Apple bug where they have bogus \0 chars in the
+ * middle of the path in some properties
+ */
+ for (p = (char *)mem_start, ep = p + l; p < ep; p++)
+ if ((*p) == '\0') {
+ memmove(p, p+1, ep - p);
+ ep--;
+ }
mem_start = ALIGNUL(mem_start + l + 1);
}
diff --git a/arch/ppc64/kernel/entry.S b/arch/ppc64/kernel/entry.S
index d360405..b61572e 100644
--- a/arch/ppc64/kernel/entry.S
+++ b/arch/ppc64/kernel/entry.S
@@ -436,15 +436,6 @@
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
-#ifdef CONFIG_PPC_ISERIES
- clrrdi r7,r1,THREAD_SHIFT /* get current_thread_info() */
- ld r7,TI_FLAGS(r7) /* Get run light flag */
- mfspr r9,CTRLF
- srdi r7,r7,TIF_RUN_LIGHT
- insrdi r9,r7,1,63 /* Insert run light into CTRL */
- mtspr CTRLT,r9
-#endif
-
/* convert old thread to its task_struct for return value */
addi r3,r3,-THREAD
ld r7,_NIP(r1) /* Return to _switch caller in new task */
diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S
index 92a744c..346dbf6 100644
--- a/arch/ppc64/kernel/head.S
+++ b/arch/ppc64/kernel/head.S
@@ -626,10 +626,10 @@
lhz r24,PACAPACAINDEX(r13) /* Get processor # */
cmpwi 0,r24,0 /* Are we processor 0? */
beq .__start_initialization_iSeries /* Start up the first processor */
- mfspr r4,CTRLF
- li r5,RUNLATCH /* Turn off the run light */
+ mfspr r4,SPRN_CTRLF
+ li r5,CTRL_RUNLATCH /* Turn off the run light */
andc r4,r4,r5
- mtspr CTRLT,r4
+ mtspr SPRN_CTRLT,r4
1:
HMT_LOW
@@ -2082,9 +2082,9 @@
mfspr r4, HID0
ori r4, r4, 0x1
mtspr HID0, r4
- mfspr r4, CTRLF
+ mfspr r4, SPRN_CTRLF
oris r4, r4, 0x40
- mtspr CTRLT, r4
+ mtspr SPRN_CTRLT, r4
blr
#endif
diff --git a/arch/ppc64/kernel/iSeries_setup.c b/arch/ppc64/kernel/iSeries_setup.c
index da20120..6d06eb5 100644
--- a/arch/ppc64/kernel/iSeries_setup.c
+++ b/arch/ppc64/kernel/iSeries_setup.c
@@ -852,6 +852,28 @@
late_initcall(iSeries_src_init);
+static int set_spread_lpevents(char *str)
+{
+ unsigned long i;
+ unsigned long val = simple_strtoul(str, NULL, 0);
+
+ /*
+ * The parameter is the number of processors to share in processing
+ * lp events.
+ */
+ if (( val > 0) && (val <= NR_CPUS)) {
+ for (i = 1; i < val; ++i)
+ paca[i].lpqueue_ptr = paca[0].lpqueue_ptr;
+
+ printk("lpevent processing spread over %ld processors\n", val);
+ } else {
+ printk("invalid spread_lpevents %ld\n", val);
+ }
+
+ return 1;
+}
+__setup("spread_lpevents=", set_spread_lpevents);
+
void __init iSeries_early_setup(void)
{
iSeries_fixup_klimit();
diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c
index 6abc621..f24ce2b 100644
--- a/arch/ppc64/kernel/idle.c
+++ b/arch/ppc64/kernel/idle.c
@@ -75,13 +75,9 @@
{
struct paca_struct *lpaca;
long oldval;
- unsigned long CTRL;
/* ensure iSeries run light will be out when idle */
- clear_thread_flag(TIF_RUN_LIGHT);
- CTRL = mfspr(CTRLF);
- CTRL &= ~RUNLATCH;
- mtspr(CTRLT, CTRL);
+ ppc64_runlatch_off();
lpaca = get_paca();
@@ -111,7 +107,9 @@
}
}
+ ppc64_runlatch_on();
schedule();
+ ppc64_runlatch_off();
}
return 0;
diff --git a/arch/ppc64/kernel/mf.c b/arch/ppc64/kernel/mf.c
index 1bd52ec..5aca7e8 100644
--- a/arch/ppc64/kernel/mf.c
+++ b/arch/ppc64/kernel/mf.c
@@ -1,7 +1,7 @@
/*
* mf.c
* Copyright (C) 2001 Troy D. Armstrong IBM Corporation
- * Copyright (C) 2004 Stephen Rothwell IBM Corporation
+ * Copyright (C) 2004-2005 Stephen Rothwell IBM Corporation
*
* This modules exists as an interface between a Linux secondary partition
* running on an iSeries and the primary partition's Virtual Service
@@ -36,10 +36,12 @@
#include <asm/time.h>
#include <asm/uaccess.h>
+#include <asm/paca.h>
#include <asm/iSeries/vio.h>
#include <asm/iSeries/mf.h>
#include <asm/iSeries/HvLpConfig.h>
#include <asm/iSeries/ItSpCommArea.h>
+#include <asm/iSeries/ItLpQueue.h>
/*
* This is the structure layout for the Machine Facilites LPAR event
@@ -696,36 +698,23 @@
complete(&rtc->com);
}
-int mf_get_rtc(struct rtc_time *tm)
+static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm)
{
- struct ce_msg_comp_data ce_complete;
- struct rtc_time_data rtc_data;
- int rc;
-
- memset(&ce_complete, 0, sizeof(ce_complete));
- memset(&rtc_data, 0, sizeof(rtc_data));
- init_completion(&rtc_data.com);
- ce_complete.handler = &get_rtc_time_complete;
- ce_complete.token = &rtc_data;
- rc = signal_ce_msg_simple(0x40, &ce_complete);
- if (rc)
- return rc;
- wait_for_completion(&rtc_data.com);
tm->tm_wday = 0;
tm->tm_yday = 0;
tm->tm_isdst = 0;
- if (rtc_data.rc) {
+ if (rc) {
tm->tm_sec = 0;
tm->tm_min = 0;
tm->tm_hour = 0;
tm->tm_mday = 15;
tm->tm_mon = 5;
tm->tm_year = 52;
- return rtc_data.rc;
+ return rc;
}
- if ((rtc_data.ce_msg.ce_msg[2] == 0xa9) ||
- (rtc_data.ce_msg.ce_msg[2] == 0xaf)) {
+ if ((ce_msg[2] == 0xa9) ||
+ (ce_msg[2] == 0xaf)) {
/* TOD clock is not set */
tm->tm_sec = 1;
tm->tm_min = 1;
@@ -736,7 +725,6 @@
mf_set_rtc(tm);
}
{
- u8 *ce_msg = rtc_data.ce_msg.ce_msg;
u8 year = ce_msg[5];
u8 sec = ce_msg[6];
u8 min = ce_msg[7];
@@ -765,6 +753,63 @@
return 0;
}
+int mf_get_rtc(struct rtc_time *tm)
+{
+ struct ce_msg_comp_data ce_complete;
+ struct rtc_time_data rtc_data;
+ int rc;
+
+ memset(&ce_complete, 0, sizeof(ce_complete));
+ memset(&rtc_data, 0, sizeof(rtc_data));
+ init_completion(&rtc_data.com);
+ ce_complete.handler = &get_rtc_time_complete;
+ ce_complete.token = &rtc_data;
+ rc = signal_ce_msg_simple(0x40, &ce_complete);
+ if (rc)
+ return rc;
+ wait_for_completion(&rtc_data.com);
+ return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm);
+}
+
+struct boot_rtc_time_data {
+ int busy;
+ struct ce_msg_data ce_msg;
+ int rc;
+};
+
+static void get_boot_rtc_time_complete(void *token, struct ce_msg_data *ce_msg)
+{
+ struct boot_rtc_time_data *rtc = token;
+
+ memcpy(&rtc->ce_msg, ce_msg, sizeof(rtc->ce_msg));
+ rtc->rc = 0;
+ rtc->busy = 0;
+}
+
+int mf_get_boot_rtc(struct rtc_time *tm)
+{
+ struct ce_msg_comp_data ce_complete;
+ struct boot_rtc_time_data rtc_data;
+ int rc;
+
+ memset(&ce_complete, 0, sizeof(ce_complete));
+ memset(&rtc_data, 0, sizeof(rtc_data));
+ rtc_data.busy = 1;
+ ce_complete.handler = &get_boot_rtc_time_complete;
+ ce_complete.token = &rtc_data;
+ rc = signal_ce_msg_simple(0x40, &ce_complete);
+ if (rc)
+ return rc;
+ /* We need to poll here as we are not yet taking interrupts */
+ while (rtc_data.busy) {
+ extern unsigned long lpevent_count;
+ struct ItLpQueue *lpq = get_paca()->lpqueue_ptr;
+ if (lpq && ItLpQueue_isLpIntPending(lpq))
+ lpevent_count += ItLpQueue_process(lpq, NULL);
+ }
+ return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm);
+}
+
int mf_set_rtc(struct rtc_time *tm)
{
char ce_time[12];
diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/ppc64/kernel/pSeries_reconfig.c
index cb5443f..dc2a69d 100644
--- a/arch/ppc64/kernel/pSeries_reconfig.c
+++ b/arch/ppc64/kernel/pSeries_reconfig.c
@@ -47,14 +47,6 @@
remove_proc_entry(pp->name, np->pde);
pp = pp->next;
}
-
- /* Assuming that symlinks have the same parent directory as
- * np->pde.
- */
- if (np->name_link)
- remove_proc_entry(np->name_link->name, parent->pde);
- if (np->addr_link)
- remove_proc_entry(np->addr_link->name, parent->pde);
if (np->pde)
remove_proc_entry(np->pde->name, parent->pde);
}
diff --git a/arch/ppc64/kernel/pmac_smp.c b/arch/ppc64/kernel/pmac_smp.c
index c27588e..a23de37 100644
--- a/arch/ppc64/kernel/pmac_smp.c
+++ b/arch/ppc64/kernel/pmac_smp.c
@@ -68,6 +68,7 @@
static void (*pmac_tb_freeze)(int freeze);
static struct device_node *pmac_tb_clock_chip_host;
+static u8 pmac_tb_pulsar_addr;
static DEFINE_SPINLOCK(timebase_lock);
static unsigned long timebase;
@@ -106,12 +107,9 @@
u8 data;
int rc;
- /* Strangely, the device-tree says address is 0xd2, but darwin
- * accesses 0xd0 ...
- */
pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
- 0xd4 | pmac_low_i2c_read,
+ pmac_tb_pulsar_addr | pmac_low_i2c_read,
0x2e, &data, 1);
if (rc != 0)
goto bail;
@@ -120,7 +118,7 @@
pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
- 0xd4 | pmac_low_i2c_write,
+ pmac_tb_pulsar_addr | pmac_low_i2c_write,
0x2e, &data, 1);
bail:
if (rc != 0) {
@@ -185,6 +183,12 @@
if (ncpus <= 1)
return 1;
+ /* HW sync only on these platforms */
+ if (!machine_is_compatible("PowerMac7,2") &&
+ !machine_is_compatible("PowerMac7,3") &&
+ !machine_is_compatible("RackMac3,1"))
+ goto nohwsync;
+
/* Look for the clock chip */
for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) {
struct device_node *p = of_get_parent(cc);
@@ -198,11 +202,18 @@
goto next;
switch (*reg) {
case 0xd2:
- pmac_tb_freeze = smp_core99_cypress_tb_freeze;
- printk(KERN_INFO "Timebase clock is Cypress chip\n");
+ if (device_is_compatible(cc, "pulsar-legacy-slewing")) {
+ pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+ pmac_tb_pulsar_addr = 0xd2;
+ printk(KERN_INFO "Timebase clock is Pulsar chip\n");
+ } else if (device_is_compatible(cc, "cy28508")) {
+ pmac_tb_freeze = smp_core99_cypress_tb_freeze;
+ printk(KERN_INFO "Timebase clock is Cypress chip\n");
+ }
break;
case 0xd4:
pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+ pmac_tb_pulsar_addr = 0xd4;
printk(KERN_INFO "Timebase clock is Pulsar chip\n");
break;
}
@@ -210,12 +221,15 @@
pmac_tb_clock_chip_host = p;
smp_ops->give_timebase = smp_core99_give_timebase;
smp_ops->take_timebase = smp_core99_take_timebase;
+ of_node_put(cc);
+ of_node_put(p);
break;
}
next:
of_node_put(p);
}
+ nohwsync:
mpic_request_ipis();
return ncpus;
diff --git a/arch/ppc64/kernel/process.c b/arch/ppc64/kernel/process.c
index 8b06861..cdfecbe 100644
--- a/arch/ppc64/kernel/process.c
+++ b/arch/ppc64/kernel/process.c
@@ -378,9 +378,6 @@
childregs->gpr[1] = sp + sizeof(struct pt_regs);
p->thread.regs = NULL; /* no user register state */
clear_ti_thread_flag(p->thread_info, TIF_32BIT);
-#ifdef CONFIG_PPC_ISERIES
- set_ti_thread_flag(p->thread_info, TIF_RUN_LIGHT);
-#endif
} else {
childregs->gpr[1] = usp;
p->thread.regs = childregs;
diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c
index 35ec42d..b7683ab 100644
--- a/arch/ppc64/kernel/prom_init.c
+++ b/arch/ppc64/kernel/prom_init.c
@@ -211,13 +211,23 @@
*/
#define ADDR(x) (u32) ((unsigned long)(x) - offset)
+/*
+ * Error results ... some OF calls will return "-1" on error, some
+ * will return 0, some will return either. To simplify, here are
+ * macros to use with any ihandle or phandle return value to check if
+ * it is valid
+ */
+
+#define PROM_ERROR (-1u)
+#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR)
+#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR)
+
+
/* This is the one and *ONLY* place where we actually call open
* firmware from, since we need to make sure we're running in 32b
* mode when we do. We switch back to 64b mode upon return.
*/
-#define PROM_ERROR (-1)
-
static int __init call_prom(const char *service, int nargs, int nret, ...)
{
int i;
@@ -587,14 +597,13 @@
{
unsigned long offset = reloc_offset();
ihandle elfloader;
- int ret;
elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
if (elfloader == 0) {
prom_printf("couldn't open /packages/elf-loader\n");
return;
}
- ret = call_prom("call-method", 3, 1, ADDR("process-elf-header"),
+ call_prom("call-method", 3, 1, ADDR("process-elf-header"),
elfloader, ADDR(&fake_elf));
call_prom("close", 1, 0, elfloader);
}
@@ -646,7 +655,7 @@
base = _ALIGN_UP(base + 0x100000, align)) {
prom_debug(" trying: 0x%x\n\r", base);
addr = (unsigned long)prom_claim(base, size, 0);
- if ((int)addr != PROM_ERROR)
+ if (addr != PROM_ERROR)
break;
addr = 0;
if (align == 0)
@@ -708,7 +717,7 @@
for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align)) {
prom_debug(" trying: 0x%x\n\r", base);
addr = (unsigned long)prom_claim(base, size, 0);
- if ((int)addr != PROM_ERROR)
+ if (addr != PROM_ERROR)
break;
addr = 0;
}
@@ -902,18 +911,19 @@
{
unsigned long offset = reloc_offset();
struct prom_t *_prom = PTRRELOC(&prom);
- phandle prom_rtas, rtas_node;
+ phandle rtas_node;
+ ihandle rtas_inst;
u32 base, entry = 0;
u32 size = 0;
prom_debug("prom_instantiate_rtas: start...\n");
- prom_rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
- prom_debug("prom_rtas: %x\n", prom_rtas);
- if (prom_rtas == (phandle) -1)
+ rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas"));
+ prom_debug("rtas_node: %x\n", rtas_node);
+ if (!PHANDLE_VALID(rtas_node))
return;
- prom_getprop(prom_rtas, "rtas-size", &size, sizeof(size));
+ prom_getprop(rtas_node, "rtas-size", &size, sizeof(size));
if (size == 0)
return;
@@ -922,14 +932,18 @@
prom_printf("RTAS allocation failed !\n");
return;
}
- prom_printf("instantiating rtas at 0x%x", base);
- rtas_node = call_prom("open", 1, 1, ADDR("/rtas"));
- prom_printf("...");
+ rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
+ if (!IHANDLE_VALID(rtas_inst)) {
+ prom_printf("opening rtas package failed");
+ return;
+ }
+
+ prom_printf("instantiating rtas at 0x%x ...", base);
if (call_prom("call-method", 3, 2,
ADDR("instantiate-rtas"),
- rtas_node, base) != PROM_ERROR) {
+ rtas_inst, base) != PROM_ERROR) {
entry = (long)_prom->args.rets[1];
}
if (entry == 0) {
@@ -940,8 +954,8 @@
reserve_mem(base, size);
- prom_setprop(prom_rtas, "linux,rtas-base", &base, sizeof(base));
- prom_setprop(prom_rtas, "linux,rtas-entry", &entry, sizeof(entry));
+ prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base));
+ prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry));
prom_debug("rtas base = 0x%x\n", base);
prom_debug("rtas entry = 0x%x\n", entry);
@@ -1062,7 +1076,7 @@
prom_printf("opening PHB %s", path);
phb_node = call_prom("open", 1, 1, path);
- if ( (long)phb_node <= 0)
+ if (phb_node == 0)
prom_printf("... failed\n");
else
prom_printf("... done\n");
@@ -1279,12 +1293,12 @@
/* get a handle for the stdout device */
_prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen"));
- if ((long)_prom->chosen <= 0)
+ if (!PHANDLE_VALID(_prom->chosen))
prom_panic("cannot find chosen"); /* msg won't be printed :( */
/* get device tree root */
_prom->root = call_prom("finddevice", 1, 1, ADDR("/"));
- if ((long)_prom->root <= 0)
+ if (!PHANDLE_VALID(_prom->root))
prom_panic("cannot find device tree root"); /* msg won't be printed :( */
}
@@ -1356,9 +1370,8 @@
}
/* Default to pSeries. We need to know if we are running LPAR */
rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
- if (rtas != (phandle) -1) {
- unsigned long x;
- x = prom_getproplen(rtas, "ibm,hypertas-functions");
+ if (PHANDLE_VALID(rtas)) {
+ int x = prom_getproplen(rtas, "ibm,hypertas-functions");
if (x != PROM_ERROR) {
prom_printf("Hypertas detected, assuming LPAR !\n");
return PLATFORM_PSERIES_LPAR;
@@ -1426,12 +1439,13 @@
* leave some room at the end of the path for appending extra
* arguments
*/
- if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-10) < 0)
+ if (call_prom("package-to-path", 3, 1, node, path,
+ PROM_SCRATCH_SIZE-10) == PROM_ERROR)
continue;
prom_printf("found display : %s, opening ... ", path);
ih = call_prom("open", 1, 1, path);
- if (ih == (ihandle)0 || ih == (ihandle)-1) {
+ if (ih == 0) {
prom_printf("failed\n");
continue;
}
@@ -1514,6 +1528,12 @@
return 0;
}
+/*
+ * The Open Firmware 1275 specification states properties must be 31 bytes or
+ * less, however not all firmwares obey this. Make it 64 bytes to be safe.
+ */
+#define MAX_PROPERTY_NAME 64
+
static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start,
unsigned long *mem_end)
{
@@ -1527,10 +1547,12 @@
/* get and store all property names */
prev_name = RELOC("");
for (;;) {
-
- /* 32 is max len of name including nul. */
- namep = make_room(mem_start, mem_end, 32, 1);
- if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) {
+ int rc;
+
+ /* 64 is max len of name including nul. */
+ namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1);
+ rc = call_prom("nextprop", 3, 1, node, prev_name, namep);
+ if (rc != 1) {
/* No more nodes: unwind alloc */
*mem_start = (unsigned long)namep;
break;
@@ -1555,18 +1577,12 @@
}
}
-/*
- * The Open Firmware 1275 specification states properties must be 31 bytes or
- * less, however not all firmwares obey this. Make it 64 bytes to be safe.
- */
-#define MAX_PROPERTY_NAME 64
-
static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
unsigned long *mem_end)
{
int l, align;
phandle child;
- char *namep, *prev_name, *sstart;
+ char *namep, *prev_name, *sstart, *p, *ep;
unsigned long soff;
unsigned char *valp;
unsigned long offset = reloc_offset();
@@ -1588,6 +1604,14 @@
call_prom("package-to-path", 3, 1, node, namep, l);
}
namep[l] = '\0';
+ /* Fixup an Apple bug where they have bogus \0 chars in the
+ * middle of the path in some properties
+ */
+ for (p = namep, ep = namep + l; p < ep; p++)
+ if (*p == '\0') {
+ memmove(p, p+1, ep - p);
+ ep--; l--;
+ }
*mem_start = _ALIGN(((unsigned long) namep) + strlen(namep) + 1, 4);
}
@@ -1599,7 +1623,10 @@
prev_name = RELOC("");
sstart = (char *)RELOC(dt_string_start);
for (;;) {
- if (call_prom("nextprop", 3, 1, node, prev_name, pname) <= 0)
+ int rc;
+
+ rc = call_prom("nextprop", 3, 1, node, prev_name, pname);
+ if (rc != 1)
break;
/* find string offset */
@@ -1615,7 +1642,7 @@
l = call_prom("getproplen", 2, 1, node, pname);
/* sanity checks */
- if (l < 0)
+ if (l == PROM_ERROR)
continue;
if (l > MAX_PROPERTY_LENGTH) {
prom_printf("WARNING: ignoring large property ");
@@ -1750,7 +1777,45 @@
prom_printf("Device tree struct 0x%x -> 0x%x\n",
RELOC(dt_struct_start), RELOC(dt_struct_end));
- }
+}
+
+
+static void __init fixup_device_tree(void)
+{
+ unsigned long offset = reloc_offset();
+ phandle u3, i2c, mpic;
+ u32 u3_rev;
+ u32 interrupts[2];
+ u32 parent;
+
+ /* Some G5s have a missing interrupt definition, fix it up here */
+ u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000"));
+ if (!PHANDLE_VALID(u3))
+ return;
+ i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000"));
+ if (!PHANDLE_VALID(i2c))
+ return;
+ mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000"));
+ if (!PHANDLE_VALID(mpic))
+ return;
+
+ /* check if proper rev of u3 */
+ if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev))
+ == PROM_ERROR)
+ return;
+ if (u3_rev != 0x35)
+ return;
+ /* does it need fixup ? */
+ if (prom_getproplen(i2c, "interrupts") > 0)
+ return;
+ /* interrupt on this revision of u3 is number 0 and level */
+ interrupts[0] = 0;
+ interrupts[1] = 1;
+ prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts));
+ parent = (u32)mpic;
+ prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent));
+}
+
static void __init prom_find_boot_cpu(void)
{
@@ -1844,6 +1909,12 @@
&getprop_rval, sizeof(getprop_rval));
/*
+ * On pSeries, inform the firmware about our capabilities
+ */
+ if (RELOC(of_platform) & PLATFORM_PSERIES)
+ prom_send_capabilities();
+
+ /*
* On pSeries, copy the CPU hold code
*/
if (RELOC(of_platform) & PLATFORM_PSERIES)
@@ -1920,6 +1991,11 @@
}
/*
+ * Fixup any known bugs in the device-tree
+ */
+ fixup_device_tree();
+
+ /*
* Now finally create the flattened device-tree
*/
prom_printf("copying OF device tree ...\n");
diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c
index 3e70b91..6798905 100644
--- a/arch/ppc64/kernel/rtc.c
+++ b/arch/ppc64/kernel/rtc.c
@@ -292,47 +292,10 @@
void iSeries_get_boot_time(struct rtc_time *tm)
{
- unsigned long time;
- static unsigned long lastsec = 1;
-
- u32 dataWord1 = *((u32 *)(&xSpCommArea.xBcdTimeAtIplStart));
- u32 dataWord2 = *(((u32 *)&(xSpCommArea.xBcdTimeAtIplStart)) + 1);
- int year = 1970;
- int year1 = ( dataWord1 >> 24 ) & 0x000000FF;
- int year2 = ( dataWord1 >> 16 ) & 0x000000FF;
- int sec = ( dataWord1 >> 8 ) & 0x000000FF;
- int min = dataWord1 & 0x000000FF;
- int hour = ( dataWord2 >> 24 ) & 0x000000FF;
- int day = ( dataWord2 >> 8 ) & 0x000000FF;
- int mon = dataWord2 & 0x000000FF;
-
if ( piranha_simulator )
return;
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year1);
- BCD_TO_BIN(year2);
- year = year1 * 100 + year2;
-
- time = mktime(year, mon, day, hour, min, sec);
- time += ( jiffies / HZ );
-
- /* Now THIS is a nasty hack!
- * It ensures that the first two calls get different answers.
- * That way the loop in init_time (time.c) will not think
- * the clock is stuck.
- */
- if ( lastsec ) {
- time -= lastsec;
- --lastsec;
- }
-
- to_tm(time, tm);
- tm->tm_year -= 1900;
+ mf_get_boot_rtc(tm);
tm->tm_mon -= 1;
}
#endif
diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c
index 21c57f5..dce198d 100644
--- a/arch/ppc64/kernel/setup.c
+++ b/arch/ppc64/kernel/setup.c
@@ -103,11 +103,6 @@
extern void smp_release_cpus(void);
-unsigned long decr_overclock = 1;
-unsigned long decr_overclock_proc0 = 1;
-unsigned long decr_overclock_set = 0;
-unsigned long decr_overclock_proc0_set = 0;
-
int have_of = 1;
int boot_cpuid = 0;
int boot_cpuid_phys = 0;
@@ -1120,64 +1115,15 @@
printk("[dump]%04x %s\n", src, msg);
}
-int set_spread_lpevents( char * str )
-{
- /* The parameter is the number of processors to share in processing lp events */
- unsigned long i;
- unsigned long val = simple_strtoul( str, NULL, 0 );
- if ( ( val > 0 ) && ( val <= NR_CPUS ) ) {
- for ( i=1; i<val; ++i )
- paca[i].lpqueue_ptr = paca[0].lpqueue_ptr;
- printk("lpevent processing spread over %ld processors\n", val);
- }
- else
- printk("invalid spreaqd_lpevents %ld\n", val);
- return 1;
-}
-
/* This should only be called on processor 0 during calibrate decr */
void setup_default_decr(void)
{
struct paca_struct *lpaca = get_paca();
- if ( decr_overclock_set && !decr_overclock_proc0_set )
- decr_overclock_proc0 = decr_overclock;
-
- lpaca->default_decr = tb_ticks_per_jiffy / decr_overclock_proc0;
+ lpaca->default_decr = tb_ticks_per_jiffy;
lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy;
}
-int set_decr_overclock_proc0( char * str )
-{
- unsigned long val = simple_strtoul( str, NULL, 0 );
- if ( ( val >= 1 ) && ( val <= 48 ) ) {
- decr_overclock_proc0_set = 1;
- decr_overclock_proc0 = val;
- printk("proc 0 decrementer overclock factor of %ld\n", val);
- }
- else
- printk("invalid proc 0 decrementer overclock factor of %ld\n", val);
- return 1;
-}
-
-int set_decr_overclock( char * str )
-{
- unsigned long val = simple_strtoul( str, NULL, 0 );
- if ( ( val >= 1 ) && ( val <= 48 ) ) {
- decr_overclock_set = 1;
- decr_overclock = val;
- printk("decrementer overclock factor of %ld\n", val);
- }
- else
- printk("invalid decrementer overclock factor of %ld\n", val);
- return 1;
-
-}
-
-__setup("spread_lpevents=", set_spread_lpevents );
-__setup("decr_overclock_proc0=", set_decr_overclock_proc0 );
-__setup("decr_overclock=", set_decr_overclock );
-
#ifndef CONFIG_PPC_ISERIES
/*
* This function can be used by platforms to "find" legacy serial ports.
diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c
index 3b906cd..9ef5d36 100644
--- a/arch/ppc64/kernel/smp.c
+++ b/arch/ppc64/kernel/smp.c
@@ -334,7 +334,6 @@
}
}
-extern unsigned long decr_overclock;
extern struct gettimeofday_struct do_gtod;
struct thread_info *current_set[NR_CPUS];
@@ -491,7 +490,7 @@
if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))
return -EINVAL;
- paca[cpu].default_decr = tb_ticks_per_jiffy / decr_overclock;
+ paca[cpu].default_decr = tb_ticks_per_jiffy;
if (!cpu_has_feature(CPU_FTR_SLB)) {
void *tmp;
diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c
index 0925694..c8fa656 100644
--- a/arch/ppc64/kernel/sysfs.c
+++ b/arch/ppc64/kernel/sysfs.c
@@ -113,7 +113,6 @@
#ifdef CONFIG_PPC_PSERIES
unsigned long set, reset;
int ret;
- unsigned int ctrl;
#endif /* CONFIG_PPC_PSERIES */
/* Only need to enable them once */
@@ -167,11 +166,8 @@
* On SMT machines we have to set the run latch in the ctrl register
* in order to make PMC6 spin.
*/
- if (cpu_has_feature(CPU_FTR_SMT)) {
- ctrl = mfspr(CTRLF);
- ctrl |= RUNLATCH;
- mtspr(CTRLT, ctrl);
- }
+ if (cpu_has_feature(CPU_FTR_SMT))
+ ppc64_runlatch_on();
#endif /* CONFIG_PPC_PSERIES */
}
diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c
index 772a465..33364a7 100644
--- a/arch/ppc64/kernel/time.c
+++ b/arch/ppc64/kernel/time.c
@@ -325,9 +325,7 @@
irq_enter();
-#ifndef CONFIG_PPC_ISERIES
profile_tick(CPU_PROFILING, regs);
-#endif
lpaca->lppaca.int_dword.fields.decr_int = 0;
@@ -515,6 +513,7 @@
do_gtod.varp = &do_gtod.vars[0];
do_gtod.var_idx = 0;
do_gtod.varp->tb_orig_stamp = tb_last_stamp;
+ get_paca()->next_jiffy_update_tb = tb_last_stamp + tb_ticks_per_jiffy;
do_gtod.varp->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
do_gtod.varp->tb_to_xs = tb_to_xs;
diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c
index 2929834..2803bc7 100644
--- a/arch/sparc64/kernel/pci_iommu.c
+++ b/arch/sparc64/kernel/pci_iommu.c
@@ -8,6 +8,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/delay.h>
#include <asm/pbm.h>
@@ -195,6 +196,34 @@
return NULL;
}
+static int iommu_alloc_ctx(struct pci_iommu *iommu)
+{
+ int lowest = iommu->ctx_lowest_free;
+ int sz = IOMMU_NUM_CTXS - lowest;
+ int n = find_next_zero_bit(iommu->ctx_bitmap, sz, lowest);
+
+ if (unlikely(n == sz)) {
+ n = find_next_zero_bit(iommu->ctx_bitmap, lowest, 1);
+ if (unlikely(n == lowest)) {
+ printk(KERN_WARNING "IOMMU: Ran out of contexts.\n");
+ n = 0;
+ }
+ }
+ if (n)
+ __set_bit(n, iommu->ctx_bitmap);
+
+ return n;
+}
+
+static inline void iommu_free_ctx(struct pci_iommu *iommu, int ctx)
+{
+ if (likely(ctx)) {
+ __clear_bit(ctx, iommu->ctx_bitmap);
+ if (ctx < iommu->ctx_lowest_free)
+ iommu->ctx_lowest_free = ctx;
+ }
+}
+
/* Allocate and map kernel buffer of size SIZE using consistent mode
* DMA for PCI device PDEV. Return non-NULL cpu-side address if
* successful and set *DMA_ADDRP to the PCI side dma address.
@@ -235,7 +264,7 @@
npages = size >> IO_PAGE_SHIFT;
ctx = 0;
if (iommu->iommu_ctxflush)
- ctx = iommu->iommu_cur_ctx++;
+ ctx = iommu_alloc_ctx(iommu);
first_page = __pa(first_page);
while (npages--) {
iopte_val(*iopte) = (IOPTE_CONSISTENT(ctx) |
@@ -316,6 +345,8 @@
}
}
+ iommu_free_ctx(iommu, ctx);
+
spin_unlock_irqrestore(&iommu->lock, flags);
order = get_order(size);
@@ -359,7 +390,7 @@
base_paddr = __pa(oaddr & IO_PAGE_MASK);
ctx = 0;
if (iommu->iommu_ctxflush)
- ctx = iommu->iommu_cur_ctx++;
+ ctx = iommu_alloc_ctx(iommu);
if (strbuf->strbuf_enabled)
iopte_protection = IOPTE_STREAMING(ctx);
else
@@ -379,6 +410,70 @@
return PCI_DMA_ERROR_CODE;
}
+static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages, int direction)
+{
+ int limit;
+
+ if (strbuf->strbuf_ctxflush &&
+ iommu->iommu_ctxflush) {
+ unsigned long matchreg, flushreg;
+ u64 val;
+
+ flushreg = strbuf->strbuf_ctxflush;
+ matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
+
+ pci_iommu_write(flushreg, ctx);
+ val = pci_iommu_read(matchreg);
+ val &= 0xffff;
+ if (!val)
+ goto do_flush_sync;
+
+ while (val) {
+ if (val & 0x1)
+ pci_iommu_write(flushreg, ctx);
+ val >>= 1;
+ }
+ val = pci_iommu_read(matchreg);
+ if (unlikely(val)) {
+ printk(KERN_WARNING "pci_strbuf_flush: ctx flush "
+ "timeout matchreg[%lx] ctx[%lx]\n",
+ val, ctx);
+ goto do_page_flush;
+ }
+ } else {
+ unsigned long i;
+
+ do_page_flush:
+ for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE)
+ pci_iommu_write(strbuf->strbuf_pflush, vaddr);
+ }
+
+do_flush_sync:
+ /* If the device could not have possibly put dirty data into
+ * the streaming cache, no flush-flag synchronization needs
+ * to be performed.
+ */
+ if (direction == PCI_DMA_TODEVICE)
+ return;
+
+ PCI_STC_FLUSHFLAG_INIT(strbuf);
+ pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
+ (void) pci_iommu_read(iommu->write_complete_reg);
+
+ limit = 100000;
+ while (!PCI_STC_FLUSHFLAG_SET(strbuf)) {
+ limit--;
+ if (!limit)
+ break;
+ udelay(1);
+ membar("#LoadLoad");
+ }
+ if (!limit)
+ printk(KERN_WARNING "pci_strbuf_flush: flushflag timeout "
+ "vaddr[%08x] ctx[%lx] npages[%ld]\n",
+ vaddr, ctx, npages);
+}
+
/* Unmap a single streaming mode DMA translation. */
void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction)
{
@@ -386,7 +481,7 @@
struct pci_iommu *iommu;
struct pci_strbuf *strbuf;
iopte_t *base;
- unsigned long flags, npages, i, ctx;
+ unsigned long flags, npages, ctx;
if (direction == PCI_DMA_NONE)
BUG();
@@ -414,29 +509,8 @@
ctx = (iopte_val(*base) & IOPTE_CONTEXT) >> 47UL;
/* Step 1: Kick data out of streaming buffers if necessary. */
- if (strbuf->strbuf_enabled) {
- u32 vaddr = bus_addr;
-
- PCI_STC_FLUSHFLAG_INIT(strbuf);
- if (strbuf->strbuf_ctxflush &&
- iommu->iommu_ctxflush) {
- unsigned long matchreg, flushreg;
-
- flushreg = strbuf->strbuf_ctxflush;
- matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
- do {
- pci_iommu_write(flushreg, ctx);
- } while(((long)pci_iommu_read(matchreg)) < 0L);
- } else {
- for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE)
- pci_iommu_write(strbuf->strbuf_pflush, vaddr);
- }
-
- pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
- (void) pci_iommu_read(iommu->write_complete_reg);
- while (!PCI_STC_FLUSHFLAG_SET(strbuf))
- membar("#LoadLoad");
- }
+ if (strbuf->strbuf_enabled)
+ pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
/* Step 2: Clear out first TSB entry. */
iopte_make_dummy(iommu, base);
@@ -444,6 +518,8 @@
free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base,
npages, ctx);
+ iommu_free_ctx(iommu, ctx);
+
spin_unlock_irqrestore(&iommu->lock, flags);
}
@@ -583,7 +659,7 @@
/* Step 4: Choose a context if necessary. */
ctx = 0;
if (iommu->iommu_ctxflush)
- ctx = iommu->iommu_cur_ctx++;
+ ctx = iommu_alloc_ctx(iommu);
/* Step 5: Create the mappings. */
if (strbuf->strbuf_enabled)
@@ -647,29 +723,8 @@
ctx = (iopte_val(*base) & IOPTE_CONTEXT) >> 47UL;
/* Step 1: Kick data out of streaming buffers if necessary. */
- if (strbuf->strbuf_enabled) {
- u32 vaddr = (u32) bus_addr;
-
- PCI_STC_FLUSHFLAG_INIT(strbuf);
- if (strbuf->strbuf_ctxflush &&
- iommu->iommu_ctxflush) {
- unsigned long matchreg, flushreg;
-
- flushreg = strbuf->strbuf_ctxflush;
- matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
- do {
- pci_iommu_write(flushreg, ctx);
- } while(((long)pci_iommu_read(matchreg)) < 0L);
- } else {
- for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE)
- pci_iommu_write(strbuf->strbuf_pflush, vaddr);
- }
-
- pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
- (void) pci_iommu_read(iommu->write_complete_reg);
- while (!PCI_STC_FLUSHFLAG_SET(strbuf))
- membar("#LoadLoad");
- }
+ if (strbuf->strbuf_enabled)
+ pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
/* Step 2: Clear out first TSB entry. */
iopte_make_dummy(iommu, base);
@@ -677,6 +732,8 @@
free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base,
npages, ctx);
+ iommu_free_ctx(iommu, ctx);
+
spin_unlock_irqrestore(&iommu->lock, flags);
}
@@ -715,28 +772,7 @@
}
/* Step 2: Kick data out of streaming buffers. */
- PCI_STC_FLUSHFLAG_INIT(strbuf);
- if (iommu->iommu_ctxflush &&
- strbuf->strbuf_ctxflush) {
- unsigned long matchreg, flushreg;
-
- flushreg = strbuf->strbuf_ctxflush;
- matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
- do {
- pci_iommu_write(flushreg, ctx);
- } while(((long)pci_iommu_read(matchreg)) < 0L);
- } else {
- unsigned long i;
-
- for (i = 0; i < npages; i++, bus_addr += IO_PAGE_SIZE)
- pci_iommu_write(strbuf->strbuf_pflush, bus_addr);
- }
-
- /* Step 3: Perform flush synchronization sequence. */
- pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
- (void) pci_iommu_read(iommu->write_complete_reg);
- while (!PCI_STC_FLUSHFLAG_SET(strbuf))
- membar("#LoadLoad");
+ pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
spin_unlock_irqrestore(&iommu->lock, flags);
}
@@ -749,7 +785,8 @@
struct pcidev_cookie *pcp;
struct pci_iommu *iommu;
struct pci_strbuf *strbuf;
- unsigned long flags, ctx;
+ unsigned long flags, ctx, npages, i;
+ u32 bus_addr;
pcp = pdev->sysdata;
iommu = pcp->pbm->iommu;
@@ -772,36 +809,14 @@
}
/* Step 2: Kick data out of streaming buffers. */
- PCI_STC_FLUSHFLAG_INIT(strbuf);
- if (iommu->iommu_ctxflush &&
- strbuf->strbuf_ctxflush) {
- unsigned long matchreg, flushreg;
-
- flushreg = strbuf->strbuf_ctxflush;
- matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
- do {
- pci_iommu_write(flushreg, ctx);
- } while (((long)pci_iommu_read(matchreg)) < 0L);
- } else {
- unsigned long i, npages;
- u32 bus_addr;
-
- bus_addr = sglist[0].dma_address & IO_PAGE_MASK;
-
- for(i = 1; i < nelems; i++)
- if (!sglist[i].dma_length)
- break;
- i--;
- npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) - bus_addr) >> IO_PAGE_SHIFT;
- for (i = 0; i < npages; i++, bus_addr += IO_PAGE_SIZE)
- pci_iommu_write(strbuf->strbuf_pflush, bus_addr);
- }
-
- /* Step 3: Perform flush synchronization sequence. */
- pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
- (void) pci_iommu_read(iommu->write_complete_reg);
- while (!PCI_STC_FLUSHFLAG_SET(strbuf))
- membar("#LoadLoad");
+ bus_addr = sglist[0].dma_address & IO_PAGE_MASK;
+ for(i = 1; i < nelems; i++)
+ if (!sglist[i].dma_length)
+ break;
+ i--;
+ npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length)
+ - bus_addr) >> IO_PAGE_SHIFT;
+ pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
spin_unlock_irqrestore(&iommu->lock, flags);
}
diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index 3567fa8..534320e 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -1212,7 +1212,7 @@
/* Setup initial software IOMMU state. */
spin_lock_init(&iommu->lock);
- iommu->iommu_cur_ctx = 0;
+ iommu->ctx_lowest_free = 1;
/* Register addresses. */
iommu->iommu_control = p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL;
diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c
index 5525d1e..53d333b 100644
--- a/arch/sparc64/kernel/pci_sabre.c
+++ b/arch/sparc64/kernel/pci_sabre.c
@@ -1265,7 +1265,7 @@
/* Setup initial software IOMMU state. */
spin_lock_init(&iommu->lock);
- iommu->iommu_cur_ctx = 0;
+ iommu->ctx_lowest_free = 1;
/* Register addresses. */
iommu->iommu_control = p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL;
diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c
index e93fcad..5753175 100644
--- a/arch/sparc64/kernel/pci_schizo.c
+++ b/arch/sparc64/kernel/pci_schizo.c
@@ -1753,7 +1753,7 @@
/* Setup initial software IOMMU state. */
spin_lock_init(&iommu->lock);
- iommu->iommu_cur_ctx = 0;
+ iommu->ctx_lowest_free = 1;
/* Register addresses, SCHIZO has iommu ctx flushing. */
iommu->iommu_control = pbm->pbm_regs + SCHIZO_IOMMU_CONTROL;
diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c
index 14d9c3a..89f5e01 100644
--- a/arch/sparc64/kernel/sbus.c
+++ b/arch/sparc64/kernel/sbus.c
@@ -117,19 +117,42 @@
#define STRBUF_TAG_VALID 0x02UL
-static void strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages)
+static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages, int direction)
{
- iommu->strbuf_flushflag = 0UL;
- while (npages--)
- upa_writeq(base + (npages << IO_PAGE_SHIFT),
+ unsigned long n;
+ int limit;
+
+ n = npages;
+ while (n--)
+ upa_writeq(base + (n << IO_PAGE_SHIFT),
iommu->strbuf_regs + STRBUF_PFLUSH);
+ /* If the device could not have possibly put dirty data into
+ * the streaming cache, no flush-flag synchronization needs
+ * to be performed.
+ */
+ if (direction == SBUS_DMA_TODEVICE)
+ return;
+
+ iommu->strbuf_flushflag = 0UL;
+
/* Whoopee cushion! */
upa_writeq(__pa(&iommu->strbuf_flushflag),
iommu->strbuf_regs + STRBUF_FSYNC);
upa_readq(iommu->sbus_control_reg);
- while (iommu->strbuf_flushflag == 0UL)
+
+ limit = 100000;
+ while (iommu->strbuf_flushflag == 0UL) {
+ limit--;
+ if (!limit)
+ break;
+ udelay(1);
membar("#LoadLoad");
+ }
+ if (!limit)
+ printk(KERN_WARNING "sbus_strbuf_flush: flushflag timeout "
+ "vaddr[%08x] npages[%ld]\n",
+ base, npages);
}
static iopte_t *alloc_streaming_cluster(struct sbus_iommu *iommu, unsigned long npages)
@@ -406,7 +429,7 @@
spin_lock_irqsave(&iommu->lock, flags);
free_streaming_cluster(iommu, dma_base, size >> IO_PAGE_SHIFT);
- strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT);
+ sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT, direction);
spin_unlock_irqrestore(&iommu->lock, flags);
}
@@ -569,7 +592,7 @@
iommu = sdev->bus->iommu;
spin_lock_irqsave(&iommu->lock, flags);
free_streaming_cluster(iommu, dvma_base, size >> IO_PAGE_SHIFT);
- strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT);
+ sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT, direction);
spin_unlock_irqrestore(&iommu->lock, flags);
}
@@ -581,7 +604,7 @@
size = (IO_PAGE_ALIGN(base + size) - (base & IO_PAGE_MASK));
spin_lock_irqsave(&iommu->lock, flags);
- strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT);
+ sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT, direction);
spin_unlock_irqrestore(&iommu->lock, flags);
}
@@ -605,7 +628,7 @@
size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - base;
spin_lock_irqsave(&iommu->lock, flags);
- strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT);
+ sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT, direction);
spin_unlock_irqrestore(&iommu->lock, flags);
}
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index 12c3d84b..b7e6a91 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -383,6 +383,17 @@
/* Use PROM debug console. */
register_console(&prom_debug_console);
break;
+ case 'P':
+ /* Force UltraSPARC-III P-Cache on. */
+ if (tlb_type != cheetah) {
+ printk("BOOT: Ignoring P-Cache force option.\n");
+ break;
+ }
+ cheetah_pcache_forced_on = 1;
+ add_taint(TAINT_MACHINE_CHECK);
+ cheetah_enable_pcache();
+ break;
+
default:
printk("Unknown boot switch (-%c)\n", c);
break;
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 6dff06a..e5b9c7a 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -123,6 +123,9 @@
smp_setup_percpu_timer();
+ if (cheetah_pcache_forced_on)
+ cheetah_enable_pcache();
+
local_irq_enable();
calibrate_delay();
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 56b203a..a9f4596 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -421,6 +421,25 @@
}
}
+int cheetah_pcache_forced_on;
+
+void cheetah_enable_pcache(void)
+{
+ unsigned long dcr;
+
+ printk("CHEETAH: Enabling P-Cache on cpu %d.\n",
+ smp_processor_id());
+
+ __asm__ __volatile__("ldxa [%%g0] %1, %0"
+ : "=r" (dcr)
+ : "i" (ASI_DCU_CONTROL_REG));
+ dcr |= (DCU_PE | DCU_HPE | DCU_SPE | DCU_SL);
+ __asm__ __volatile__("stxa %0, [%%g0] %1\n\t"
+ "membar #Sync"
+ : /* no outputs */
+ : "r" (dcr), "i" (ASI_DCU_CONTROL_REG));
+}
+
/* Cheetah error trap handling. */
static unsigned long ecache_flush_physbase;
static unsigned long ecache_flush_linesize;
diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug
index b89989d..bd41e42 100644
--- a/arch/um/Kconfig.debug
+++ b/arch/um/Kconfig.debug
@@ -2,10 +2,6 @@
source "lib/Kconfig.debug"
-config FRAME_POINTER
- bool
- default y if DEBUG_INFO
-
config PT_PROXY
bool "Enable ptrace proxy"
depends on XTERM_CHAN && DEBUG_INFO && MODE_TT
diff --git a/arch/um/Kconfig_x86_64 b/arch/um/Kconfig_x86_64
index fd8d7e8..f162f50 100644
--- a/arch/um/Kconfig_x86_64
+++ b/arch/um/Kconfig_x86_64
@@ -6,6 +6,10 @@
bool
default y
+config TOP_ADDR
+ hex
+ default 0x80000000
+
config 3_LEVEL_PGTABLES
bool
default y
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index 0150038..14a12d6 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -20,9 +20,17 @@
#include "os.h"
#ifdef CONFIG_NOCONFIG_CHAN
+
+/* The printk's here are wrong because we are complaining that there is no
+ * output device, but printk is printing to that output device. The user will
+ * never see the error. printf would be better, except it can't run on a
+ * kernel stack because it will overflow it.
+ * Use printk for now since that will avoid crashing.
+ */
+
static void *not_configged_init(char *str, int device, struct chan_opts *opts)
{
- printf(KERN_ERR "Using a channel type which is configured out of "
+ printk(KERN_ERR "Using a channel type which is configured out of "
"UML\n");
return(NULL);
}
@@ -30,27 +38,27 @@
static int not_configged_open(int input, int output, int primary, void *data,
char **dev_out)
{
- printf(KERN_ERR "Using a channel type which is configured out of "
+ printk(KERN_ERR "Using a channel type which is configured out of "
"UML\n");
return(-ENODEV);
}
static void not_configged_close(int fd, void *data)
{
- printf(KERN_ERR "Using a channel type which is configured out of "
+ printk(KERN_ERR "Using a channel type which is configured out of "
"UML\n");
}
static int not_configged_read(int fd, char *c_out, void *data)
{
- printf(KERN_ERR "Using a channel type which is configured out of "
+ printk(KERN_ERR "Using a channel type which is configured out of "
"UML\n");
return(-EIO);
}
static int not_configged_write(int fd, const char *buf, int len, void *data)
{
- printf(KERN_ERR "Using a channel type which is configured out of "
+ printk(KERN_ERR "Using a channel type which is configured out of "
"UML\n");
return(-EIO);
}
@@ -58,7 +66,7 @@
static int not_configged_console_write(int fd, const char *buf, int len,
void *data)
{
- printf(KERN_ERR "Using a channel type which is configured out of "
+ printk(KERN_ERR "Using a channel type which is configured out of "
"UML\n");
return(-EIO);
}
@@ -66,7 +74,7 @@
static int not_configged_window_size(int fd, void *data, unsigned short *rows,
unsigned short *cols)
{
- printf(KERN_ERR "Using a channel type which is configured out of "
+ printk(KERN_ERR "Using a channel type which is configured out of "
"UML\n");
return(-ENODEV);
}
diff --git a/arch/um/drivers/mcast_kern.c b/arch/um/drivers/mcast_kern.c
index faf714e..217438c 100644
--- a/arch/um/drivers/mcast_kern.c
+++ b/arch/um/drivers/mcast_kern.c
@@ -73,7 +73,6 @@
struct mcast_init *init = data;
char *port_str = NULL, *ttl_str = NULL, *remain;
char *last;
- int n;
*init = ((struct mcast_init)
{ .addr = "239.192.168.1",
@@ -89,13 +88,12 @@
}
if(port_str != NULL){
- n = simple_strtoul(port_str, &last, 10);
+ init->port = simple_strtoul(port_str, &last, 10);
if((*last != '\0') || (last == port_str)){
printk(KERN_ERR "mcast_setup - Bad port : '%s'\n",
port_str);
return(0);
}
- init->port = htons(n);
}
if(ttl_str != NULL){
diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c
index 0fe1d9f..7a0d115 100644
--- a/arch/um/drivers/mcast_user.c
+++ b/arch/um/drivers/mcast_user.c
@@ -38,7 +38,7 @@
}
sin->sin_family = AF_INET;
sin->sin_addr.s_addr = in_aton(addr);
- sin->sin_port = port;
+ sin->sin_port = htons(port);
return(sin);
}
@@ -55,28 +55,25 @@
struct mcast_data *pri = data;
struct sockaddr_in *sin = pri->mcast_addr;
struct ip_mreq mreq;
- int fd, yes = 1;
+ int fd = -EINVAL, yes = 1, err = -EINVAL;;
- if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) {
- fd = -EINVAL;
+ if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0))
goto out;
- }
fd = socket(AF_INET, SOCK_DGRAM, 0);
+
if (fd < 0){
printk("mcast_open : data socket failed, errno = %d\n",
errno);
- fd = -ENOMEM;
+ fd = -errno;
goto out;
}
if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) {
printk("mcast_open: SO_REUSEADDR failed, errno = %d\n",
errno);
- os_close_file(fd);
- fd = -EINVAL;
- goto out;
+ goto out_close;
}
/* set ttl according to config */
@@ -84,26 +81,20 @@
sizeof(pri->ttl)) < 0) {
printk("mcast_open: IP_MULTICAST_TTL failed, error = %d\n",
errno);
- os_close_file(fd);
- fd = -EINVAL;
- goto out;
+ goto out_close;
}
/* set LOOP, so data does get fed back to local sockets */
if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, &yes, sizeof(yes)) < 0) {
printk("mcast_open: IP_MULTICAST_LOOP failed, error = %d\n",
errno);
- os_close_file(fd);
- fd = -EINVAL;
- goto out;
+ goto out_close;
}
/* bind socket to mcast address */
if (bind(fd, (struct sockaddr *) sin, sizeof(*sin)) < 0) {
printk("mcast_open : data bind failed, errno = %d\n", errno);
- os_close_file(fd);
- fd = -EINVAL;
- goto out;
+ goto out_close;
}
/* subscribe to the multicast group */
@@ -117,12 +108,15 @@
"interface on the host.\n");
printk("eth0 should be configured in order to use the "
"multicast transport.\n");
- os_close_file(fd);
- fd = -EINVAL;
+ goto out_close;
}
out:
- return(fd);
+ return fd;
+
+ out_close:
+ os_close_file(fd);
+ return err;
}
static void mcast_close(int fd, void *data)
@@ -164,14 +158,3 @@
.delete_address = NULL,
.max_packet = MAX_PACKET - ETH_HEADER_OTHER
};
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c
index d43e9fa..f9e2219 100644
--- a/arch/um/drivers/random.c
+++ b/arch/um/drivers/random.c
@@ -1,5 +1,10 @@
-/* Much of this ripped from hw_random.c */
-
+/* Copyright (C) 2005 Jeff Dike <jdike@addtoit.com> */
+/* Much of this ripped from drivers/char/hw_random.c, see there for other
+ * copyright.
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ */
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
@@ -12,8 +17,6 @@
*/
#define RNG_VERSION "1.0.0"
#define RNG_MODULE_NAME "random"
-#define RNG_DRIVER_NAME RNG_MODULE_NAME " virtual driver " RNG_VERSION
-#define PFX RNG_MODULE_NAME ": "
#define RNG_MISCDEV_MINOR 183 /* official */
@@ -98,7 +101,7 @@
err = misc_register (&rng_miscdev);
if (err) {
- printk (KERN_ERR PFX "misc device register failed\n");
+ printk (KERN_ERR RNG_MODULE_NAME ": misc device register failed\n");
goto err_out_cleanup_hw;
}
@@ -120,3 +123,6 @@
module_init (rng_init);
module_exit (rng_cleanup);
+
+MODULE_DESCRIPTION("UML Host Random Number Generator (RNG) driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c
index a2bac42..b32a770 100644
--- a/arch/um/drivers/ssl.c
+++ b/arch/um/drivers/ssl.c
@@ -22,7 +22,6 @@
#include "init.h"
#include "irq_user.h"
#include "mconsole_kern.h"
-#include "2_5compat.h"
static int ssl_version = 1;
diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c
index 361d0be..afbe1e7 100644
--- a/arch/um/drivers/stdio_console.c
+++ b/arch/um/drivers/stdio_console.c
@@ -28,7 +28,6 @@
#include "irq_user.h"
#include "mconsole_kern.h"
#include "init.h"
-#include "2_5compat.h"
#define MAX_TTYS (16)
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 9a56ff9..2a7f689 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -49,13 +49,12 @@
#include "irq_user.h"
#include "irq_kern.h"
#include "ubd_user.h"
-#include "2_5compat.h"
#include "os.h"
#include "mem.h"
#include "mem_kern.h"
#include "cow.h"
-enum ubd_req { UBD_READ, UBD_WRITE, UBD_MMAP };
+enum ubd_req { UBD_READ, UBD_WRITE };
struct io_thread_req {
enum ubd_req op;
@@ -68,8 +67,6 @@
unsigned long sector_mask;
unsigned long long cow_offset;
unsigned long bitmap_words[2];
- int map_fd;
- unsigned long long map_offset;
int error;
};
@@ -122,10 +119,6 @@
#define MAX_DEV (8)
-/* Changed in early boot */
-static int ubd_do_mmap = 0;
-#define UBD_MMAP_BLOCK_SIZE PAGE_SIZE
-
static struct block_device_operations ubd_blops = {
.owner = THIS_MODULE,
.open = ubd_open,
@@ -175,12 +168,6 @@
int no_cow;
struct cow cow;
struct platform_device pdev;
-
- int map_writes;
- int map_reads;
- int nomap_writes;
- int nomap_reads;
- int write_maps;
};
#define DEFAULT_COW { \
@@ -200,11 +187,6 @@
.openflags = OPEN_FLAGS, \
.no_cow = 0, \
.cow = DEFAULT_COW, \
- .map_writes = 0, \
- .map_reads = 0, \
- .nomap_writes = 0, \
- .nomap_reads = 0, \
- .write_maps = 0, \
}
struct ubd ubd_dev[MAX_DEV] = { [ 0 ... MAX_DEV - 1 ] = DEFAULT_UBD };
@@ -314,13 +296,6 @@
int major;
str++;
- if(!strcmp(str, "mmap")){
- CHOOSE_MODE(printk("mmap not supported by the ubd "
- "driver in tt mode\n"),
- ubd_do_mmap = 1);
- return(0);
- }
-
if(!strcmp(str, "sync")){
global_openflags = of_sync(global_openflags);
return(0);
@@ -464,9 +439,9 @@
__setup("udb", udb_setup);
__uml_help(udb_setup,
"udb\n"
-" This option is here solely to catch ubd -> udb typos, which can be\n\n"
-" to impossible to catch visually unless you specifically look for\n\n"
-" them. The only result of any option starting with 'udb' is an error\n\n"
+" This option is here solely to catch ubd -> udb typos, which can be\n"
+" to impossible to catch visually unless you specifically look for\n"
+" them. The only result of any option starting with 'udb' is an error\n"
" in the boot output.\n\n"
);
@@ -524,7 +499,7 @@
{
struct io_thread_req req;
struct request *rq = elv_next_request(ubd_queue);
- int n, err;
+ int n;
do_ubd = NULL;
intr_count++;
@@ -538,19 +513,6 @@
return;
}
- if((req.op != UBD_MMAP) &&
- ((req.offset != ((__u64) (rq->sector)) << 9) ||
- (req.length != (rq->current_nr_sectors) << 9)))
- panic("I/O op mismatch");
-
- if(req.map_fd != -1){
- err = physmem_subst_mapping(req.buffer, req.map_fd,
- req.map_offset, 1);
- if(err)
- printk("ubd_handler - physmem_subst_mapping failed, "
- "err = %d\n", -err);
- }
-
ubd_finish(rq, req.error);
reactivate_fd(thread_fd, UBD_IRQ);
do_ubd_request(ubd_queue);
@@ -583,14 +545,10 @@
static void ubd_close(struct ubd *dev)
{
- if(ubd_do_mmap)
- physmem_forget_descriptor(dev->fd);
os_close_file(dev->fd);
if(dev->cow.file == NULL)
return;
- if(ubd_do_mmap)
- physmem_forget_descriptor(dev->cow.fd);
os_close_file(dev->cow.fd);
vfree(dev->cow.bitmap);
dev->cow.bitmap = NULL;
@@ -1010,94 +968,13 @@
req->bitmap_words, bitmap_len);
}
-static int mmap_fd(struct request *req, struct ubd *dev, __u64 offset)
-{
- __u64 sector;
- unsigned char *bitmap;
- int bit, i;
-
- /* mmap must have been requested on the command line */
- if(!ubd_do_mmap)
- return(-1);
-
- /* The buffer must be page aligned */
- if(((unsigned long) req->buffer % UBD_MMAP_BLOCK_SIZE) != 0)
- return(-1);
-
- /* The request must be a page long */
- if((req->current_nr_sectors << 9) != PAGE_SIZE)
- return(-1);
-
- if(dev->cow.file == NULL)
- return(dev->fd);
-
- sector = offset >> 9;
- bitmap = (unsigned char *) dev->cow.bitmap;
- bit = ubd_test_bit(sector, bitmap);
-
- for(i = 1; i < req->current_nr_sectors; i++){
- if(ubd_test_bit(sector + i, bitmap) != bit)
- return(-1);
- }
-
- if(bit || (rq_data_dir(req) == WRITE))
- offset += dev->cow.data_offset;
-
- /* The data on disk must be page aligned */
- if((offset % UBD_MMAP_BLOCK_SIZE) != 0)
- return(-1);
-
- return(bit ? dev->fd : dev->cow.fd);
-}
-
-static int prepare_mmap_request(struct ubd *dev, int fd, __u64 offset,
- struct request *req,
- struct io_thread_req *io_req)
-{
- int err;
-
- if(rq_data_dir(req) == WRITE){
- /* Writes are almost no-ops since the new data is already in the
- * host page cache
- */
- dev->map_writes++;
- if(dev->cow.file != NULL)
- cowify_bitmap(io_req->offset, io_req->length,
- &io_req->sector_mask, &io_req->cow_offset,
- dev->cow.bitmap, dev->cow.bitmap_offset,
- io_req->bitmap_words,
- dev->cow.bitmap_len);
- }
- else {
- int w;
-
- if((dev->cow.file != NULL) && (fd == dev->cow.fd))
- w = 0;
- else w = dev->openflags.w;
-
- if((dev->cow.file != NULL) && (fd == dev->fd))
- offset += dev->cow.data_offset;
-
- err = physmem_subst_mapping(req->buffer, fd, offset, w);
- if(err){
- printk("physmem_subst_mapping failed, err = %d\n",
- -err);
- return(1);
- }
- dev->map_reads++;
- }
- io_req->op = UBD_MMAP;
- io_req->buffer = req->buffer;
- return(0);
-}
-
/* Called with ubd_io_lock held */
static int prepare_request(struct request *req, struct io_thread_req *io_req)
{
struct gendisk *disk = req->rq_disk;
struct ubd *dev = disk->private_data;
__u64 offset;
- int len, fd;
+ int len;
if(req->rq_status == RQ_INACTIVE) return(1);
@@ -1114,34 +991,12 @@
io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd;
io_req->fds[1] = dev->fd;
- io_req->map_fd = -1;
io_req->cow_offset = -1;
io_req->offset = offset;
io_req->length = len;
io_req->error = 0;
io_req->sector_mask = 0;
- fd = mmap_fd(req, dev, io_req->offset);
- if(fd > 0){
- /* If mmapping is otherwise OK, but the first access to the
- * page is a write, then it's not mapped in yet. So we have
- * to write the data to disk first, then we can map the disk
- * page in and continue normally from there.
- */
- if((rq_data_dir(req) == WRITE) && !is_remapped(req->buffer)){
- io_req->map_fd = dev->fd;
- io_req->map_offset = io_req->offset +
- dev->cow.data_offset;
- dev->write_maps++;
- }
- else return(prepare_mmap_request(dev, fd, io_req->offset, req,
- io_req));
- }
-
- if(rq_data_dir(req) == READ)
- dev->nomap_reads++;
- else dev->nomap_writes++;
-
io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE;
io_req->offsets[0] = 0;
io_req->offsets[1] = dev->cow.data_offset;
@@ -1229,143 +1084,6 @@
return(-EINVAL);
}
-static int ubd_check_remapped(int fd, unsigned long address, int is_write,
- __u64 offset)
-{
- __u64 bitmap_offset;
- unsigned long new_bitmap[2];
- int i, err, n;
-
- /* If it's not a write access, we can't do anything about it */
- if(!is_write)
- return(0);
-
- /* We have a write */
- for(i = 0; i < sizeof(ubd_dev) / sizeof(ubd_dev[0]); i++){
- struct ubd *dev = &ubd_dev[i];
-
- if((dev->fd != fd) && (dev->cow.fd != fd))
- continue;
-
- /* It's a write to a ubd device */
-
- /* This should be impossible now */
- if(!dev->openflags.w){
- /* It's a write access on a read-only device - probably
- * shouldn't happen. If the kernel is trying to change
- * something with no intention of writing it back out,
- * then this message will clue us in that this needs
- * fixing
- */
- printk("Write access to mapped page from readonly ubd "
- "device %d\n", i);
- return(0);
- }
-
- /* It's a write to a writeable ubd device - it must be COWed
- * because, otherwise, the page would have been mapped in
- * writeable
- */
-
- if(!dev->cow.file)
- panic("Write fault on writeable non-COW ubd device %d",
- i);
-
- /* It should also be an access to the backing file since the
- * COW pages should be mapped in read-write
- */
-
- if(fd == dev->fd)
- panic("Write fault on a backing page of ubd "
- "device %d\n", i);
-
- /* So, we do the write, copying the backing data to the COW
- * file...
- */
-
- err = os_seek_file(dev->fd, offset + dev->cow.data_offset);
- if(err < 0)
- panic("Couldn't seek to %lld in COW file of ubd "
- "device %d, err = %d",
- offset + dev->cow.data_offset, i, -err);
-
- n = os_write_file(dev->fd, (void *) address, PAGE_SIZE);
- if(n != PAGE_SIZE)
- panic("Couldn't copy data to COW file of ubd "
- "device %d, err = %d", i, -n);
-
- /* ... updating the COW bitmap... */
-
- cowify_bitmap(offset, PAGE_SIZE, NULL, &bitmap_offset,
- dev->cow.bitmap, dev->cow.bitmap_offset,
- new_bitmap, dev->cow.bitmap_len);
-
- err = os_seek_file(dev->fd, bitmap_offset);
- if(err < 0)
- panic("Couldn't seek to %lld in COW file of ubd "
- "device %d, err = %d", bitmap_offset, i, -err);
-
- n = os_write_file(dev->fd, new_bitmap, sizeof(new_bitmap));
- if(n != sizeof(new_bitmap))
- panic("Couldn't update bitmap of ubd device %d, "
- "err = %d", i, -n);
-
- /* Maybe we can map the COW page in, and maybe we can't. If
- * it is a pre-V3 COW file, we can't, since the alignment will
- * be wrong. If it is a V3 or later COW file which has been
- * moved to a system with a larger page size, then maybe we
- * can't, depending on the exact location of the page.
- */
-
- offset += dev->cow.data_offset;
-
- /* Remove the remapping, putting the original anonymous page
- * back. If the COW file can be mapped in, that is done.
- * Otherwise, the COW page is read in.
- */
-
- if(!physmem_remove_mapping((void *) address))
- panic("Address 0x%lx not remapped by ubd device %d",
- address, i);
- if((offset % UBD_MMAP_BLOCK_SIZE) == 0)
- physmem_subst_mapping((void *) address, dev->fd,
- offset, 1);
- else {
- err = os_seek_file(dev->fd, offset);
- if(err < 0)
- panic("Couldn't seek to %lld in COW file of "
- "ubd device %d, err = %d", offset, i,
- -err);
-
- n = os_read_file(dev->fd, (void *) address, PAGE_SIZE);
- if(n != PAGE_SIZE)
- panic("Failed to read page from offset %llx of "
- "COW file of ubd device %d, err = %d",
- offset, i, -n);
- }
-
- return(1);
- }
-
- /* It's not a write on a ubd device */
- return(0);
-}
-
-static struct remapper ubd_remapper = {
- .list = LIST_HEAD_INIT(ubd_remapper.list),
- .proc = ubd_check_remapped,
-};
-
-static int ubd_remapper_setup(void)
-{
- if(ubd_do_mmap)
- register_remapper(&ubd_remapper);
-
- return(0);
-}
-
-__initcall(ubd_remapper_setup);
-
static int same_backing_files(char *from_cmdline, char *from_cow, char *cow)
{
struct uml_stat buf1, buf2;
@@ -1568,15 +1286,6 @@
int err;
__u64 off;
- if(req->op == UBD_MMAP){
- /* Touch the page to force the host to do any necessary IO to
- * get it into memory
- */
- n = *((volatile int *) req->buffer);
- req->error = update_bitmap(req);
- return;
- }
-
nsectors = req->length / req->sectorsize;
start = 0;
do {
diff --git a/arch/um/include/2_5compat.h b/arch/um/include/2_5compat.h
deleted file mode 100644
index abdb015..0000000
--- a/arch/um/include/2_5compat.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2001 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __2_5_COMPAT_H__
-#define __2_5_COMPAT_H__
-
-#define INIT_HARDSECT(arr, maj, sizes)
-
-#define SET_PRI(task) do ; while(0)
-
-#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/sysdep-i386/ptrace.h b/arch/um/include/sysdep-i386/ptrace.h
index 84ec7ff..6eaeb99 100644
--- a/arch/um/include/sysdep-i386/ptrace.h
+++ b/arch/um/include/sysdep-i386/ptrace.h
@@ -31,7 +31,6 @@
#ifdef UML_CONFIG_MODE_SKAS
#include "skas_ptregs.h"
-#include "sysdep/faultinfo.h"
#define REGS_IP(r) ((r)[HOST_IP])
#define REGS_SP(r) ((r)[HOST_SP])
@@ -59,6 +58,7 @@
#define PTRACE_SYSEMU_SINGLESTEP 32
#endif
+#include "sysdep/faultinfo.h"
#include "choose-mode.h"
union uml_pt_regs {
diff --git a/arch/um/include/sysdep-x86_64/checksum.h b/arch/um/include/sysdep-x86_64/checksum.h
index 572c6c1..ea97005 100644
--- a/arch/um/include/sysdep-x86_64/checksum.h
+++ b/arch/um/include/sysdep-x86_64/checksum.h
@@ -9,8 +9,6 @@
#include "linux/in6.h"
#include "asm/uaccess.h"
-extern unsigned int csum_partial_copy_from(const unsigned char *src, unsigned char *dst, int len,
- int sum, int *err_ptr);
extern unsigned csum_partial(const unsigned char *buff, unsigned len,
unsigned sum);
@@ -31,10 +29,15 @@
}
static __inline__
-unsigned int csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
- int len, int sum, int *err_ptr)
+unsigned int csum_partial_copy_from_user(const unsigned char *src,
+ unsigned char *dst, int len, int sum,
+ int *err_ptr)
{
- return csum_partial_copy_from(src, dst, len, sum, err_ptr);
+ if(copy_from_user(dst, src, len)){
+ *err_ptr = -EFAULT;
+ return(-1);
+ }
+ return csum_partial(dst, len, sum);
}
/**
@@ -137,15 +140,6 @@
return a;
}
-#endif
+extern unsigned short ip_compute_csum(unsigned char * buff, int len);
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+#endif
diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h
index 348e8fc..be8acd5 100644
--- a/arch/um/include/sysdep-x86_64/ptrace.h
+++ b/arch/um/include/sysdep-x86_64/ptrace.h
@@ -135,6 +135,7 @@
__CHOOSE_MODE(SC_EFLAGS(UPT_SC(r)), REGS_EFLAGS((r)->skas.regs))
#define UPT_SC(r) ((r)->tt.sc)
#define UPT_SYSCALL_NR(r) __CHOOSE_MODE((r)->tt.syscall, (r)->skas.syscall)
+#define UPT_SYSCALL_RET(r) UPT_RAX(r)
extern int user_context(unsigned long sp);
@@ -196,32 +197,32 @@
#define UPT_SET(regs, reg, val) \
- ({ unsigned long val; \
+ ({ unsigned long __upt_val = val; \
switch(reg){ \
- case R8: UPT_R8(regs) = val; break; \
- case R9: UPT_R9(regs) = val; break; \
- case R10: UPT_R10(regs) = val; break; \
- case R11: UPT_R11(regs) = val; break; \
- case R12: UPT_R12(regs) = val; break; \
- case R13: UPT_R13(regs) = val; break; \
- case R14: UPT_R14(regs) = val; break; \
- case R15: UPT_R15(regs) = val; break; \
- case RIP: UPT_IP(regs) = val; break; \
- case RSP: UPT_SP(regs) = val; break; \
- case RAX: UPT_RAX(regs) = val; break; \
- case RBX: UPT_RBX(regs) = val; break; \
- case RCX: UPT_RCX(regs) = val; break; \
- case RDX: UPT_RDX(regs) = val; break; \
- case RSI: UPT_RSI(regs) = val; break; \
- case RDI: UPT_RDI(regs) = val; break; \
- case RBP: UPT_RBP(regs) = val; break; \
- case ORIG_RAX: UPT_ORIG_RAX(regs) = val; break; \
- case CS: UPT_CS(regs) = val; break; \
- case DS: UPT_DS(regs) = val; break; \
- case ES: UPT_ES(regs) = val; break; \
- case FS: UPT_FS(regs) = val; break; \
- case GS: UPT_GS(regs) = val; break; \
- case EFLAGS: UPT_EFLAGS(regs) = val; break; \
+ case R8: UPT_R8(regs) = __upt_val; break; \
+ case R9: UPT_R9(regs) = __upt_val; break; \
+ case R10: UPT_R10(regs) = __upt_val; break; \
+ case R11: UPT_R11(regs) = __upt_val; break; \
+ case R12: UPT_R12(regs) = __upt_val; break; \
+ case R13: UPT_R13(regs) = __upt_val; break; \
+ case R14: UPT_R14(regs) = __upt_val; break; \
+ case R15: UPT_R15(regs) = __upt_val; break; \
+ case RIP: UPT_IP(regs) = __upt_val; break; \
+ case RSP: UPT_SP(regs) = __upt_val; break; \
+ case RAX: UPT_RAX(regs) = __upt_val; break; \
+ case RBX: UPT_RBX(regs) = __upt_val; break; \
+ case RCX: UPT_RCX(regs) = __upt_val; break; \
+ case RDX: UPT_RDX(regs) = __upt_val; break; \
+ case RSI: UPT_RSI(regs) = __upt_val; break; \
+ case RDI: UPT_RDI(regs) = __upt_val; break; \
+ case RBP: UPT_RBP(regs) = __upt_val; break; \
+ case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \
+ case CS: UPT_CS(regs) = __upt_val; break; \
+ case DS: UPT_DS(regs) = __upt_val; break; \
+ case ES: UPT_ES(regs) = __upt_val; break; \
+ case FS: UPT_FS(regs) = __upt_val; break; \
+ case GS: UPT_GS(regs) = __upt_val; break; \
+ case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \
default : \
panic("Bad register in UPT_SET : %d\n", reg); \
break; \
@@ -245,14 +246,3 @@
CHOOSE_MODE((&(r)->tt.faultinfo), (&(r)->skas.faultinfo))
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/sysrq.h b/arch/um/include/sysrq.h
index 2ce9423..c8d332b 100644
--- a/arch/um/include/sysrq.h
+++ b/arch/um/include/sysrq.h
@@ -1,6 +1,7 @@
#ifndef __UM_SYSRQ_H
#define __UM_SYSRQ_H
-extern void show_trace(unsigned long *stack);
+struct task_struct;
+extern void show_trace(struct task_struct* task, unsigned long *stack);
#endif
diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile
index 9736ca2..a8918e80 100644
--- a/arch/um/kernel/Makefile
+++ b/arch/um/kernel/Makefile
@@ -14,7 +14,7 @@
tlb.o trap_kern.o trap_user.o uaccess_user.o um_arch.o umid.o \
user_util.o
-obj-$(CONFIG_BLK_DEV_INITRD) += initrd_kern.o initrd_user.o
+obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o
obj-$(CONFIG_GPROF) += gprof_syms.o
obj-$(CONFIG_GCOV) += gmon_syms.o
obj-$(CONFIG_TTY_LOG) += tty_log.o
diff --git a/arch/um/kernel/checksum.c b/arch/um/kernel/checksum.c
deleted file mode 100644
index e69de29..0000000
--- a/arch/um/kernel/checksum.c
+++ /dev/null
diff --git a/arch/um/kernel/exec_kern.c b/arch/um/kernel/exec_kern.c
index 49ddabe..efd222f 100644
--- a/arch/um/kernel/exec_kern.c
+++ b/arch/um/kernel/exec_kern.c
@@ -16,7 +16,6 @@
#include "kern.h"
#include "irq_user.h"
#include "tlb.h"
-#include "2_5compat.h"
#include "os.h"
#include "time_user.h"
#include "choose-mode.h"
diff --git a/arch/um/kernel/initrd_kern.c b/arch/um/kernel/initrd.c
similarity index 75%
rename from arch/um/kernel/initrd_kern.c
rename to arch/um/kernel/initrd.c
index fc568af..82ecf90 100644
--- a/arch/um/kernel/initrd_kern.c
+++ b/arch/um/kernel/initrd.c
@@ -41,12 +41,31 @@
return 0;
}
-__uml_setup("initrd=", uml_initrd_setup,
+__uml_setup("initrd=", uml_initrd_setup,
"initrd=<initrd image>\n"
" This is used to boot UML from an initrd image. The argument is the\n"
" name of the file containing the image.\n\n"
);
+int load_initrd(char *filename, void *buf, int size)
+{
+ int fd, n;
+
+ fd = os_open_file(filename, of_read(OPENFLAGS()), 0);
+ if(fd < 0){
+ printk("Opening '%s' failed - err = %d\n", filename, -fd);
+ return(-1);
+ }
+ n = os_read_file(fd, buf, size);
+ if(n != size){
+ printk("Read of %d bytes from '%s' failed, err = %d\n", size,
+ filename, -n);
+ return(-1);
+ }
+
+ os_close_file(fd);
+ return(0);
+}
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
diff --git a/arch/um/kernel/initrd_user.c b/arch/um/kernel/initrd_user.c
deleted file mode 100644
index cb90681..0000000
--- a/arch/um/kernel/initrd_user.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <errno.h>
-
-#include "user_util.h"
-#include "kern_util.h"
-#include "user.h"
-#include "initrd.h"
-#include "os.h"
-
-int load_initrd(char *filename, void *buf, int size)
-{
- int fd, n;
-
- fd = os_open_file(filename, of_read(OPENFLAGS()), 0);
- if(fd < 0){
- printk("Opening '%s' failed - err = %d\n", filename, -fd);
- return(-1);
- }
- n = os_read_file(fd, buf, size);
- if(n != size){
- printk("Read of %d bytes from '%s' failed, err = %d\n", size,
- filename, -n);
- return(-1);
- }
-
- os_close_file(fd);
- return(0);
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/irq_user.c b/arch/um/kernel/irq_user.c
index 6d6f948..b3074cb 100644
--- a/arch/um/kernel/irq_user.c
+++ b/arch/um/kernel/irq_user.c
@@ -236,9 +236,15 @@
(*prev)->fd, pollfds[i].fd);
goto out;
}
- memcpy(&pollfds[i], &pollfds[i + 1],
- (pollfds_num - i - 1) * sizeof(pollfds[0]));
+
pollfds_num--;
+
+ /* This moves the *whole* array after pollfds[i] (though
+ * it doesn't spot as such)! */
+
+ memmove(&pollfds[i], &pollfds[i + 1],
+ (pollfds_num - i) * sizeof(pollfds[0]));
+
if(last_irq_ptr == &old_fd->next)
last_irq_ptr = prev;
*prev = (*prev)->next;
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index 78d69dc..99439fa 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -57,6 +57,7 @@
EXPORT_SYMBOL(strncpy_from_user_skas);
EXPORT_SYMBOL(copy_to_user_skas);
EXPORT_SYMBOL(copy_from_user_skas);
+EXPORT_SYMBOL(clear_user_skas);
#endif
EXPORT_SYMBOL(uml_strdup);
diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c
index a17c497..e42e636 100644
--- a/arch/um/kernel/main.c
+++ b/arch/um/kernel/main.c
@@ -71,7 +71,7 @@
static void last_ditch_exit(int sig)
{
- CHOOSE_MODE(kmalloc_ok = 0, (void) 0);
+ kmalloc_ok = 0;
signal(SIGINT, SIG_DFL);
signal(SIGTERM, SIG_DFL);
signal(SIGHUP, SIG_DFL);
@@ -87,7 +87,7 @@
{
char **new_argv;
sigset_t mask;
- int ret, i;
+ int ret, i, err;
/* Enable all signals except SIGIO - in some environments, we can
* enter with some signals blocked
@@ -160,27 +160,29 @@
*/
change_sig(SIGPROF, 0);
+ /* This signal stuff used to be in the reboot case. However,
+ * sometimes a SIGVTALRM can come in when we're halting (reproducably
+ * when writing out gcov information, presumably because that takes
+ * some time) and cause a segfault.
+ */
+
+ /* stop timers and set SIG*ALRM to be ignored */
+ disable_timer();
+
+ /* disable SIGIO for the fds and set SIGIO to be ignored */
+ err = deactivate_all_fds();
+ if(err)
+ printf("deactivate_all_fds failed, errno = %d\n", -err);
+
+ /* Let any pending signals fire now. This ensures
+ * that they won't be delivered after the exec, when
+ * they are definitely not expected.
+ */
+ unblock_signals();
+
/* Reboot */
if(ret){
- int err;
-
printf("\n");
-
- /* stop timers and set SIG*ALRM to be ignored */
- disable_timer();
-
- /* disable SIGIO for the fds and set SIGIO to be ignored */
- err = deactivate_all_fds();
- if(err)
- printf("deactivate_all_fds failed, errno = %d\n",
- -err);
-
- /* Let any pending signals fire now. This ensures
- * that they won't be delivered after the exec, when
- * they are definitely not expected.
- */
- unblock_signals();
-
execvp(new_argv[0], new_argv);
perror("Failed to exec kernel");
ret = 1;
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index f156661..c22825f 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -100,12 +100,37 @@
#endif
}
+/*
+ * Create a page table and place a pointer to it in a middle page
+ * directory entry.
+ */
+static void __init one_page_table_init(pmd_t *pmd)
+{
+ if (pmd_none(*pmd)) {
+ pte_t *pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+ set_pmd(pmd, __pmd(_KERNPG_TABLE +
+ (unsigned long) __pa(pte)));
+ if (pte != pte_offset_kernel(pmd, 0))
+ BUG();
+ }
+}
+
+static void __init one_md_table_init(pud_t *pud)
+{
+#ifdef CONFIG_3_LEVEL_PGTABLES
+ pmd_t *pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+ set_pud(pud, __pud(_KERNPG_TABLE + (unsigned long) __pa(pmd_table)));
+ if (pmd_table != pmd_offset(pud, 0))
+ BUG();
+#endif
+}
+
static void __init fixrange_init(unsigned long start, unsigned long end,
pgd_t *pgd_base)
{
pgd_t *pgd;
+ pud_t *pud;
pmd_t *pmd;
- pte_t *pte;
int i, j;
unsigned long vaddr;
@@ -115,15 +140,12 @@
pgd = pgd_base + i;
for ( ; (i < PTRS_PER_PGD) && (vaddr < end); pgd++, i++) {
- pmd = (pmd_t *)pgd;
+ pud = pud_offset(pgd, vaddr);
+ if (pud_none(*pud))
+ one_md_table_init(pud);
+ pmd = pmd_offset(pud, vaddr);
for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) {
- if (pmd_none(*pmd)) {
- pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
- set_pmd(pmd, __pmd(_KERNPG_TABLE +
- (unsigned long) __pa(pte)));
- if (pte != pte_offset_kernel(pmd, 0))
- BUG();
- }
+ one_page_table_init(pmd);
vaddr += PMD_SIZE;
}
j = 0;
diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c
index c1adf7b..804c6bb 100644
--- a/arch/um/kernel/process_kern.c
+++ b/arch/um/kernel/process_kern.c
@@ -43,7 +43,6 @@
#include "tlb.h"
#include "frame_kern.h"
#include "sigcontext.h"
-#include "2_5compat.h"
#include "os.h"
#include "mode.h"
#include "mode_kern.h"
@@ -55,18 +54,6 @@
*/
struct cpu_task cpu_tasks[NR_CPUS] = { [0 ... NR_CPUS - 1] = { -1, NULL } };
-struct task_struct *get_task(int pid, int require)
-{
- struct task_struct *ret;
-
- read_lock(&tasklist_lock);
- ret = find_task_by_pid(pid);
- read_unlock(&tasklist_lock);
-
- if(require && (ret == NULL)) panic("get_task couldn't find a task\n");
- return(ret);
-}
-
int external_pid(void *t)
{
struct task_struct *task = t ? t : current;
@@ -189,7 +176,6 @@
while(1){
/* endless idle loop with no priority at all */
- SET_PRI(current);
/*
* although we are an idle CPU, we do not want to
@@ -212,11 +198,6 @@
return(PAGE_SIZE);
}
-unsigned long page_mask(void)
-{
- return(PAGE_MASK);
-}
-
void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
pte_t *pte_out)
{
@@ -349,11 +330,6 @@
return(new);
}
-void *get_init_task(void)
-{
- return(&init_thread_union.thread_info.task);
-}
-
int copy_to_user_proc(void __user *to, void *from, int size)
{
return(copy_to_user(to, from, size));
@@ -480,15 +456,3 @@
return sp & ~0xf;
}
#endif
-
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 2b75d8d..71af4d5 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -28,9 +28,9 @@
child->thread.singlestep_syscall = 0;
#ifdef SUBARCH_SET_SINGLESTEPPING
- SUBARCH_SET_SINGLESTEPPING(child, on)
+ SUBARCH_SET_SINGLESTEPPING(child, on);
#endif
- }
+}
/*
* Called by kernel/ptrace.c when detaching..
@@ -83,7 +83,7 @@
}
#ifdef SUBACH_PTRACE_SPECIAL
- SUBARCH_PTRACE_SPECIAL(child,request,addr,data)
+ SUBARCH_PTRACE_SPECIAL(child,request,addr,data);
#endif
ret = ptrace_check_attach(child, request == PTRACE_KILL);
@@ -322,11 +322,9 @@
UPT_SYSCALL_ARG2(regs),
UPT_SYSCALL_ARG3(regs),
UPT_SYSCALL_ARG4(regs));
- else {
- int res = UPT_SYSCALL_RET(regs);
- audit_syscall_exit(current, AUDITSC_RESULT(res),
- res);
- }
+ else audit_syscall_exit(current,
+ AUDITSC_RESULT(UPT_SYSCALL_RET(regs)),
+ UPT_SYSCALL_RET(regs));
}
/* Fake a debug trap */
@@ -356,14 +354,3 @@
current->exit_code = 0;
}
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index e630438..f808500 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -3,6 +3,7 @@
* Licensed under the GPL
*/
+#include "linux/config.h"
#include "linux/sched.h"
#include "linux/kernel.h"
#include "linux/module.h"
@@ -12,14 +13,14 @@
#include "sysrq.h"
#include "user_util.h"
-void show_trace(unsigned long * stack)
+/* Catch non-i386 SUBARCH's. */
+#if !defined(CONFIG_UML_X86) || defined(CONFIG_64BIT)
+void show_trace(struct task_struct *task, unsigned long * stack)
{
- /* XXX: Copy the CONFIG_FRAME_POINTER stack-walking backtrace from
- * arch/i386/kernel/traps.c, and then move this to sys-i386/sysrq.c.*/
unsigned long addr;
if (!stack) {
- stack = (unsigned long*) &stack;
+ stack = (unsigned long*) &stack;
WARN_ON(1);
}
@@ -35,6 +36,7 @@
}
printk("\n");
}
+#endif
/*
* stack dumps generator - this is used by arch-independent code.
@@ -44,7 +46,7 @@
{
unsigned long stack;
- show_trace(&stack);
+ show_trace(current, &stack);
}
EXPORT_SYMBOL(dump_stack);
@@ -59,7 +61,11 @@
int i;
if (esp == NULL) {
- if (task != current) {
+ if (task != current && task != NULL) {
+ /* XXX: Isn't this bogus? I.e. isn't this the
+ * *userspace* stack of this task? If not so, use this
+ * even when task == current (as in i386).
+ */
esp = (unsigned long *) KSTK_ESP(task);
/* Which one? No actual difference - just coding style.*/
//esp = (unsigned long *) PT_REGS_IP(&task->thread.regs);
@@ -77,5 +83,6 @@
printk("%08lx ", *stack++);
}
- show_trace(esp);
+ printk("Call Trace: \n");
+ show_trace(current, esp);
}
diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c
index 5fca2c6..c20aef1 100644
--- a/arch/um/kernel/trap_kern.c
+++ b/arch/um/kernel/trap_kern.c
@@ -23,7 +23,6 @@
#include "kern.h"
#include "chan_kern.h"
#include "mconsole_kern.h"
-#include "2_5compat.h"
#include "mem.h"
#include "mem_kern.h"
@@ -57,10 +56,11 @@
*code_out = SEGV_ACCERR;
if(is_write && !(vma->vm_flags & VM_WRITE))
goto out;
+
+ if(!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ goto out;
+
page = address & PAGE_MASK;
- pgd = pgd_offset(mm, page);
- pud = pud_offset(pgd, page);
- pmd = pmd_offset(pud, page);
do {
survive:
switch (handle_mm_fault(mm, vma, address, is_write)){
@@ -106,33 +106,6 @@
goto out;
}
-LIST_HEAD(physmem_remappers);
-
-void register_remapper(struct remapper *info)
-{
- list_add(&info->list, &physmem_remappers);
-}
-
-static int check_remapped_addr(unsigned long address, int is_write)
-{
- struct remapper *remapper;
- struct list_head *ele;
- __u64 offset;
- int fd;
-
- fd = phys_mapping(__pa(address), &offset);
- if(fd == -1)
- return(0);
-
- list_for_each(ele, &physmem_remappers){
- remapper = list_entry(ele, struct remapper, list);
- if((*remapper->proc)(fd, address, is_write, offset))
- return(1);
- }
-
- return(0);
-}
-
/*
* We give a *copy* of the faultinfo in the regs to segv.
* This must be done, since nesting SEGVs could overwrite
@@ -151,8 +124,6 @@
flush_tlb_kernel_vm();
return(0);
}
- else if(check_remapped_addr(address & PAGE_MASK, is_write))
- return(0);
else if(current->mm == NULL)
panic("Segfault with no mm");
err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
diff --git a/arch/um/kernel/tt/ksyms.c b/arch/um/kernel/tt/ksyms.c
index 92ec85d..84a9385 100644
--- a/arch/um/kernel/tt/ksyms.c
+++ b/arch/um/kernel/tt/ksyms.c
@@ -12,6 +12,7 @@
EXPORT_SYMBOL(__do_strncpy_from_user);
EXPORT_SYMBOL(__do_strnlen_user);
EXPORT_SYMBOL(__do_clear_user);
+EXPORT_SYMBOL(clear_user_tt);
EXPORT_SYMBOL(tracing_pid);
EXPORT_SYMBOL(honeypot);
diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c
index df810ca..776310f 100644
--- a/arch/um/kernel/tt/process_kern.c
+++ b/arch/um/kernel/tt/process_kern.c
@@ -32,10 +32,6 @@
unsigned long flags;
int err, vtalrm, alrm, prof, cpu;
char c;
- /* jailing and SMP are incompatible, so this doesn't need to be
- * made per-cpu
- */
- static int reading;
from = prev;
to = next;
@@ -59,13 +55,11 @@
c = 0;
set_current(to);
- reading = 0;
err = os_write_file(to->thread.mode.tt.switch_pipe[1], &c, sizeof(c));
if(err != sizeof(c))
panic("write of switch_pipe failed, err = %d", -err);
- reading = 1;
- if(from->thread.mode.tt.switch_pipe[0] == -1)
+ if(from->thread.mode.tt.switch_pipe[0] == -1)
os_kill_process(os_getpid(), 0);
err = os_read_file(from->thread.mode.tt.switch_pipe[0], &c, sizeof(c));
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 4d10ec3..4184271 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -111,12 +111,6 @@
.show = show_cpuinfo,
};
-pte_t * __bad_pagetable(void)
-{
- panic("Someone should implement __bad_pagetable");
- return(NULL);
-}
-
/* Set in linux_main */
unsigned long host_task_size;
unsigned long task_size;
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 76eadb3..dd53555 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -73,6 +73,8 @@
.got : { *(.got.plt) *(.got) }
.dynamic : { *(.dynamic) }
+ .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+ .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
index fcd67c3..4351e56 100644
--- a/arch/um/sys-i386/Makefile
+++ b/arch/um/sys-i386/Makefile
@@ -9,11 +9,11 @@
SYMLINKS = bitops.c semaphore.c highmem.c module.c
+include arch/um/scripts/Makefile.rules
+
bitops.c-dir = lib
semaphore.c-dir = kernel
highmem.c-dir = mm
module.c-dir = kernel
subdir- := util
-
-include arch/um/scripts/Makefile.rules
diff --git a/arch/um/sys-i386/delay.c b/arch/um/sys-i386/delay.c
index e9892ee..2c11b97 100644
--- a/arch/um/sys-i386/delay.c
+++ b/arch/um/sys-i386/delay.c
@@ -1,5 +1,7 @@
-#include "linux/delay.h"
-#include "asm/param.h"
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <asm/param.h>
void __delay(unsigned long time)
{
@@ -20,13 +22,19 @@
int i, n;
n = (loops_per_jiffy * HZ * usecs) / MILLION;
- for(i=0;i<n;i++) ;
+ for(i=0;i<n;i++)
+ cpu_relax();
}
+EXPORT_SYMBOL(__udelay);
+
void __const_udelay(unsigned long usecs)
{
int i, n;
n = (loops_per_jiffy * HZ * usecs) / MILLION;
- for(i=0;i<n;i++) ;
+ for(i=0;i<n;i++)
+ cpu_relax();
}
+
+EXPORT_SYMBOL(__const_udelay);
diff --git a/arch/um/sys-i386/sysrq.c b/arch/um/sys-i386/sysrq.c
index 281fc7b..e3706d1 100644
--- a/arch/um/sys-i386/sysrq.c
+++ b/arch/um/sys-i386/sysrq.c
@@ -3,12 +3,15 @@
* Licensed under the GPL
*/
+#include "linux/config.h"
#include "linux/kernel.h"
#include "linux/smp.h"
#include "linux/sched.h"
+#include "linux/kallsyms.h"
#include "asm/ptrace.h"
#include "sysrq.h"
+/* This is declared by <linux/sched.h> */
void show_regs(struct pt_regs *regs)
{
printk("\n");
@@ -31,5 +34,80 @@
0xffff & PT_REGS_DS(regs),
0xffff & PT_REGS_ES(regs));
- show_trace((unsigned long *) ®s);
+ show_trace(NULL, (unsigned long *) ®s);
}
+
+/* Copied from i386. */
+static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
+{
+ return p > (void *)tinfo &&
+ p < (void *)tinfo + THREAD_SIZE - 3;
+}
+
+/* Adapted from i386 (we also print the address we read from). */
+static inline unsigned long print_context_stack(struct thread_info *tinfo,
+ unsigned long *stack, unsigned long ebp)
+{
+ unsigned long addr;
+
+#ifdef CONFIG_FRAME_POINTER
+ while (valid_stack_ptr(tinfo, (void *)ebp)) {
+ addr = *(unsigned long *)(ebp + 4);
+ printk("%08lx: [<%08lx>]", ebp + 4, addr);
+ print_symbol(" %s", addr);
+ printk("\n");
+ ebp = *(unsigned long *)ebp;
+ }
+#else
+ while (valid_stack_ptr(tinfo, stack)) {
+ addr = *stack;
+ if (__kernel_text_address(addr)) {
+ printk("%08lx: [<%08lx>]", (unsigned long) stack, addr);
+ print_symbol(" %s", addr);
+ printk("\n");
+ }
+ stack++;
+ }
+#endif
+ return ebp;
+}
+
+void show_trace(struct task_struct* task, unsigned long * stack)
+{
+ unsigned long ebp;
+ struct thread_info *context;
+
+ /* Turn this into BUG_ON if possible. */
+ if (!stack) {
+ stack = (unsigned long*) &stack;
+ printk("show_trace: got NULL stack, implicit assumption task == current");
+ WARN_ON(1);
+ }
+
+ if (!task)
+ task = current;
+
+ if (task != current) {
+ //ebp = (unsigned long) KSTK_EBP(task);
+ /* Which one? No actual difference - just coding style.*/
+ ebp = (unsigned long) PT_REGS_EBP(&task->thread.regs);
+ } else {
+ asm ("movl %%ebp, %0" : "=r" (ebp) : );
+ }
+
+ context = (struct thread_info *)
+ ((unsigned long)stack & (~(THREAD_SIZE - 1)));
+ print_context_stack(context, stack, ebp);
+
+ /*while (((long) stack & (THREAD_SIZE-1)) != 0) {
+ addr = *stack;
+ if (__kernel_text_address(addr)) {
+ printk("%08lx: [<%08lx>]", (unsigned long) stack, addr);
+ print_symbol(" %s", addr);
+ printk("\n");
+ }
+ stack++;
+ }*/
+ printk("\n");
+}
+
diff --git a/arch/um/sys-ppc/sysrq.c b/arch/um/sys-ppc/sysrq.c
index 82d6e93..2f816f1 100644
--- a/arch/um/sys-ppc/sysrq.c
+++ b/arch/um/sys-ppc/sysrq.c
@@ -27,17 +27,5 @@
0xffff & regs->xds, 0xffff & regs->xes);
#endif
- show_trace(®s->gpr[1]);
+ show_trace(current, ®s->gpr[1]);
}
-
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile
index 3d7da91..608466a 100644
--- a/arch/um/sys-x86_64/Makefile
+++ b/arch/um/sys-x86_64/Makefile
@@ -14,11 +14,11 @@
USER_OBJS := ptrace_user.o sigcontext.o
-include arch/um/scripts/Makefile.rules
-
SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c memcpy.S \
semaphore.c thunk.S module.c
+include arch/um/scripts/Makefile.rules
+
bitops.c-dir = lib
csum-copy.S-dir = lib
csum-partial.c-dir = lib
@@ -28,6 +28,4 @@
thunk.S-dir = lib
module.c-dir = kernel
-CFLAGS_csum-partial.o := -Dcsum_partial=arch_csum_partial
-
subdir- := util
diff --git a/arch/um/sys-x86_64/delay.c b/arch/um/sys-x86_64/delay.c
index 651332a..137f444 100644
--- a/arch/um/sys-x86_64/delay.c
+++ b/arch/um/sys-x86_64/delay.c
@@ -5,40 +5,37 @@
* Licensed under the GPL
*/
-#include "linux/delay.h"
-#include "asm/processor.h"
-#include "asm/param.h"
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <asm/processor.h>
+#include <asm/param.h>
void __delay(unsigned long loops)
{
unsigned long i;
- for(i = 0; i < loops; i++) ;
+ for(i = 0; i < loops; i++)
+ cpu_relax();
}
void __udelay(unsigned long usecs)
{
- int i, n;
+ unsigned long i, n;
n = (loops_per_jiffy * HZ * usecs) / MILLION;
- for(i=0;i<n;i++) ;
+ for(i=0;i<n;i++)
+ cpu_relax();
}
+EXPORT_SYMBOL(__udelay);
+
void __const_udelay(unsigned long usecs)
{
- int i, n;
+ unsigned long i, n;
n = (loops_per_jiffy * HZ * usecs) / MILLION;
- for(i=0;i<n;i++) ;
+ for(i=0;i<n;i++)
+ cpu_relax();
}
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+EXPORT_SYMBOL(__const_udelay);
diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c
index a27f0ee..8592738 100644
--- a/arch/um/sys-x86_64/ksyms.c
+++ b/arch/um/sys-x86_64/ksyms.c
@@ -16,5 +16,4 @@
EXPORT_SYMBOL(__memcpy);
/* Networking helper routines. */
-/*EXPORT_SYMBOL(csum_partial_copy_from);
-EXPORT_SYMBOL(csum_partial_copy_to);*/
+EXPORT_SYMBOL(ip_compute_csum);
diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c
index b593bb2..74eee5c 100644
--- a/arch/um/sys-x86_64/ptrace.c
+++ b/arch/um/sys-x86_64/ptrace.c
@@ -5,10 +5,11 @@
*/
#define __FRAME_OFFSETS
-#include "asm/ptrace.h"
-#include "linux/sched.h"
-#include "linux/errno.h"
-#include "asm/elf.h"
+#include <asm/ptrace.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/uaccess.h>
+#include <asm/elf.h>
/* XXX x86_64 */
unsigned long not_ss;
diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c
index dd99146..6f44f40 100644
--- a/arch/um/sys-x86_64/syscalls.c
+++ b/arch/um/sys-x86_64/syscalls.c
@@ -15,6 +15,7 @@
#include "asm/unistd.h"
#include "asm/prctl.h" /* XXX This should get the constants from libc */
#include "choose-mode.h"
+#include "kern.h"
asmlinkage long sys_uname64(struct new_utsname __user * name)
{
@@ -132,23 +133,27 @@
#ifdef CONFIG_MODE_SKAS
+/* XXX: Must also call arch_prctl in the host, beside saving the segment bases! */
static long arch_prctl_skas(int code, unsigned long addr)
{
long ret = 0;
switch(code){
- case ARCH_SET_GS:
- current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr;
- break;
case ARCH_SET_FS:
current->thread.regs.regs.skas.regs[FS_BASE / sizeof(unsigned long)] = addr;
break;
+ case ARCH_SET_GS:
+ current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr;
+ break;
case ARCH_GET_FS:
- ret = put_user(current->thread.regs.regs.skas.regs[GS / sizeof(unsigned long)], &addr);
+ ret = put_user(current->thread.regs.regs.skas.
+ regs[FS_BASE / sizeof(unsigned long)],
+ (unsigned long __user *)addr);
break;
case ARCH_GET_GS:
- ret = put_user(current->thread.regs.regs.skas.regs[FS / sizeof(unsigned \
-long)], &addr);
+ ret = put_user(current->thread.regs.regs.skas.
+ regs[GS_BASE / sizeof(unsigned long)],
+ (unsigned long __user *)addr);
break;
default:
ret = -EINVAL;
diff --git a/arch/um/sys-x86_64/sysrq.c b/arch/um/sys-x86_64/sysrq.c
index ddf7469..d0a25af 100644
--- a/arch/um/sys-x86_64/sysrq.c
+++ b/arch/um/sys-x86_64/sysrq.c
@@ -36,14 +36,5 @@
void show_regs(struct pt_regs *regs)
{
__show_regs(regs);
- show_trace((unsigned long *) ®s);
+ show_trace(current, (unsigned long *) ®s);
}
-
-/* Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c
index 5e14792..513d17c 100644
--- a/arch/um/sys-x86_64/user-offsets.c
+++ b/arch/um/sys-x86_64/user-offsets.c
@@ -3,6 +3,14 @@
#include <signal.h>
#define __FRAME_OFFSETS
#include <asm/ptrace.h>
+#include <asm/types.h>
+/* For some reason, x86_64 defines u64 and u32 only in <pci/types.h>, which I
+ * refuse to include here, even though they're used throughout the headers.
+ * These are used in asm/user.h, and that include can't be avoided because of
+ * the sizeof(struct user_regs_struct) below.
+ */
+typedef __u64 u64;
+typedef __u32 u32;
#include <asm/user.h>
#define DEFINE(sym, val) \
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 44ee7f6..289f448 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -303,6 +303,21 @@
as it is off-chip. You can find the HPET spec at
<http://www.intel.com/labs/platcomp/hpet/hpetspec.htm>.
+config X86_PM_TIMER
+ bool "PM timer"
+ depends on ACPI
+ default y
+ help
+ Support the ACPI PM timer for time keeping. This is slow,
+ but is useful on some chipsets without HPET on systems with more
+ than one CPU. On a single processor or single socket multi core
+ system it is normally not required.
+ When the PM timer is active 64bit vsyscalls are disabled
+ and should not be enabled (/proc/sys/kernel/vsyscall64 should
+ not be changed).
+ The kernel selects the PM timer only as a last resort, so it is
+ useful to enable just in case.
+
config HPET_EMULATE_RTC
bool "Provide RTC interrupt"
depends on HPET_TIMER && RTC=y
@@ -407,7 +422,7 @@
config PCI_MMCONFIG
bool "Support mmconfig PCI config space access"
- depends on PCI
+ depends on PCI && ACPI
select ACPI_BOOT
config UNORDERED_IO
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 9ce51de..569595b 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-bk7
-# Sat Mar 12 23:43:44 2005
+# Linux kernel version: 2.6.12-rc4
+# Fri May 13 06:39:11 2005
#
CONFIG_X86_64=y
CONFIG_64BIT=y
@@ -11,8 +11,6 @@
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
-CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
@@ -22,6 +20,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -33,7 +32,6 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=18
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
@@ -43,10 +41,11 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
@@ -93,6 +92,9 @@
CONFIG_NUMA=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_NR_CPUS=8
+CONFIG_HPET_TIMER=y
+CONFIG_X86_PM_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
@@ -100,6 +102,7 @@
CONFIG_SECCOMP=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ISA_DMA_API=y
#
# Power management options
@@ -129,7 +132,7 @@
# CONFIG_ACPI_IBM is not set
CONFIG_ACPI_TOSHIBA=y
CONFIG_ACPI_BLACKLIST_YEAR=2001
-CONFIG_ACPI_DEBUG=y
+# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
@@ -141,6 +144,7 @@
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
@@ -150,7 +154,6 @@
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_TABLE=y
#
# CPUFreq processor drivers
@@ -164,6 +167,7 @@
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
+# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
@@ -172,9 +176,11 @@
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_UNORDERED_IO=y
+# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -182,10 +188,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -254,7 +256,7 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
@@ -308,7 +310,8 @@
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+CONFIG_BLK_DEV_PDC202XX_NEW=y
+# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
@@ -353,7 +356,7 @@
#
# SCSI low-level drivers
#
-CONFIG_BLK_DEV_3W_XXXX_RAID=y
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
@@ -384,7 +387,6 @@
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
@@ -392,7 +394,6 @@
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -401,6 +402,7 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
@@ -437,7 +439,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -502,7 +503,7 @@
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
+CONFIG_TUN=y
#
# ARCnet devices
@@ -525,8 +526,7 @@
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
-CONFIG_AMD8111_ETH=y
-# CONFIG_AMD8111E_NAPI is not set
+# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
@@ -536,7 +536,7 @@
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
-CONFIG_8139CP=m
+CONFIG_8139CP=y
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
@@ -671,6 +671,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -696,6 +697,7 @@
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
@@ -703,7 +705,7 @@
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_MAX_RAW_DEVS=256
-CONFIG_HANGCHECK_TIMER=y
+# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
@@ -786,6 +788,8 @@
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -797,8 +801,6 @@
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
@@ -826,7 +828,6 @@
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
@@ -965,7 +966,7 @@
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
+CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
@@ -1092,9 +1093,10 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_PRINTK_TIME is not set
+CONFIG_LOG_BUF_SHIFT=18
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index 0a3318e..5ca4a45 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -28,6 +28,7 @@
obj-$(CONFIG_DUMMY_IOMMU) += pci-nommu.o pci-dma.o
obj-$(CONFIG_SWIOTLB) += swiotlb.o
obj-$(CONFIG_KPROBES) += kprobes.o
+obj-$(CONFIG_X86_PM_TIMER) += pmtimer.o
obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index 7e13545..f8e6cc4 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -33,6 +33,7 @@
#include <asm/mpspec.h>
#include <asm/pgalloc.h>
#include <asm/mach_apic.h>
+#include <asm/nmi.h>
int apic_verbosity;
@@ -925,7 +926,7 @@
unsigned id;
DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
- bitmap_empty(clustermap, NUM_APIC_CLUSTERS);
+ bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
for (i = 0; i < NR_CPUS; i++) {
id = bios_cpu_apicid[i];
@@ -1056,7 +1057,7 @@
nr_ioapics = 0;
#endif
setup_boot_APIC_clock();
-
+ check_nmi_watchdog();
return 0;
}
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index 1086b5f..2881749 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -220,13 +220,18 @@
jmp sysret_check
/* Handle a signal */
- /* edx: work flags (arg3) */
sysret_signal:
sti
+ testl $(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SINGLESTEP),%edx
+ jz 1f
+
+ /* Really a signal */
+ /* edx: work flags (arg3) */
leaq do_notify_resume(%rip),%rax
leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
xorl %esi,%esi # oldset -> arg2
call ptregscall_common
+1: movl $_TIF_NEED_RESCHED,%edi
jmp sysret_check
/* Do syscall tracing */
@@ -484,6 +489,8 @@
jmp retint_check
retint_signal:
+ testl $(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SINGLESTEP),%edx
+ jz retint_swapgs
sti
SAVE_REST
movq $-1,ORIG_RAX(%rsp)
@@ -492,8 +499,8 @@
call do_notify_resume
RESTORE_REST
cli
+ movl $_TIF_NEED_RESCHED,%edi
GET_THREAD_INFO(%rcx)
- movl $_TIF_WORK_MASK,%edi
jmp retint_check
#ifdef CONFIG_PREEMPT
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 60be586..afd87e6 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -37,11 +37,14 @@
#include <asm/desc.h>
#include <asm/proto.h>
#include <asm/mach_apic.h>
+#include <asm/acpi.h>
#define __apicdebuginit __init
int sis_apic_bug; /* not actually supported, dummy for compile */
+static int no_timer_check;
+
static DEFINE_SPINLOCK(ioapic_lock);
/*
@@ -1601,7 +1604,7 @@
* Ok, does IRQ0 through the IOAPIC work?
*/
unmask_IO_APIC_irq(0);
- if (timer_irq_works()) {
+ if (!no_timer_check && timer_irq_works()) {
nmi_watchdog_default();
if (nmi_watchdog == NMI_IO_APIC) {
disable_8259A_irq(0);
@@ -1671,6 +1674,13 @@
panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
}
+static int __init notimercheck(char *s)
+{
+ no_timer_check = 1;
+ return 1;
+}
+__setup("no_timer_check", notimercheck);
+
/*
*
* IRQ's that are handled by the PIC in the MPS IOAPIC case.
@@ -1804,76 +1814,6 @@
#define IO_APIC_MAX_ID 0xFE
-int __init io_apic_get_unique_id (int ioapic, int apic_id)
-{
- union IO_APIC_reg_00 reg_00;
- static physid_mask_t apic_id_map;
- unsigned long flags;
- int i = 0;
-
- /*
- * The P4 platform supports up to 256 APIC IDs on two separate APIC
- * buses (one for LAPICs, one for IOAPICs), where predecessors only
- * supports up to 16 on one shared APIC bus.
- *
- * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
- * advantage of new APIC bus architecture.
- */
-
- if (physids_empty(apic_id_map))
- apic_id_map = phys_cpu_present_map;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- reg_00.raw = io_apic_read(ioapic, 0);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- if (apic_id >= IO_APIC_MAX_ID) {
- apic_printk(APIC_QUIET, KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
- "%d\n", ioapic, apic_id, reg_00.bits.ID);
- apic_id = reg_00.bits.ID;
- }
-
- /*
- * Every APIC in a system must have a unique ID or we get lots of nice
- * 'stuck on smp_invalidate_needed IPI wait' messages.
- */
- if (physid_isset(apic_id, apic_id_map)) {
-
- for (i = 0; i < IO_APIC_MAX_ID; i++) {
- if (!physid_isset(i, apic_id_map))
- break;
- }
-
- if (i == IO_APIC_MAX_ID)
- panic("Max apic_id exceeded!\n");
-
- apic_printk(APIC_VERBOSE, KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
- "trying %d\n", ioapic, apic_id, i);
-
- apic_id = i;
- }
-
- physid_set(apic_id, apic_id_map);
-
- if (reg_00.bits.ID != apic_id) {
- reg_00.bits.ID = apic_id;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(ioapic, 0, reg_00.raw);
- reg_00.raw = io_apic_read(ioapic, 0);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- /* Sanity check */
- if (reg_00.bits.ID != apic_id)
- panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
- }
-
- apic_printk(APIC_VERBOSE,KERN_INFO "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
-
- return apic_id;
-}
-
-
int __init io_apic_get_version (int ioapic)
{
union IO_APIC_reg_01 reg_01;
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index 7ec031c..61a63be 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -30,6 +30,7 @@
#include <asm/pgalloc.h>
#include <asm/io_apic.h>
#include <asm/proto.h>
+#include <asm/acpi.h>
/* Have we found an MP table */
int smp_found_config;
@@ -107,6 +108,7 @@
static void __init MP_processor_info (struct mpc_config_processor *m)
{
int ver;
+ static int found_bsp=0;
if (!(m->mpc_cpuflag & CPU_ENABLED))
return;
@@ -126,11 +128,6 @@
" Processor ignored.\n", NR_CPUS);
return;
}
- if (num_processors >= maxcpus) {
- printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
- " Processor ignored.\n", maxcpus);
- return;
- }
num_processors++;
@@ -150,7 +147,19 @@
ver = 0x10;
}
apic_version[m->mpc_apicid] = ver;
- bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
+ if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
+ /*
+ * bios_cpu_apicid is required to have processors listed
+ * in same order as logical cpu numbers. Hence the first
+ * entry is BSP, and so on.
+ */
+ bios_cpu_apicid[0] = m->mpc_apicid;
+ x86_cpu_to_apicid[0] = m->mpc_apicid;
+ found_bsp = 1;
+ } else {
+ bios_cpu_apicid[num_processors - found_bsp] = m->mpc_apicid;
+ x86_cpu_to_apicid[num_processors - found_bsp] = m->mpc_apicid;
+ }
}
static void __init MP_bus_info (struct mpc_config_bus *m)
@@ -759,7 +768,7 @@
mp_ioapics[idx].mpc_apicaddr = address;
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
- mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
+ mp_ioapics[idx].mpc_apicid = id;
mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
/*
diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c
index 61de0b3..31c0f2e 100644
--- a/arch/x86_64/kernel/nmi.c
+++ b/arch/x86_64/kernel/nmi.c
@@ -33,6 +33,7 @@
#include <asm/msr.h>
#include <asm/proto.h>
#include <asm/kdebug.h>
+#include <asm/local.h>
/*
* lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
@@ -59,7 +60,8 @@
unsigned int nmi_watchdog = NMI_DEFAULT;
static unsigned int nmi_hz = HZ;
-unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */
+static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */
+static unsigned int nmi_p4_cccr_val;
/* Note that these events don't tick when the CPU idles. This means
the frequency varies with CPU load. */
@@ -71,61 +73,87 @@
#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76
#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
-#define P6_EVNTSEL0_ENABLE (1 << 22)
-#define P6_EVNTSEL_INT (1 << 20)
-#define P6_EVNTSEL_OS (1 << 17)
-#define P6_EVNTSEL_USR (1 << 16)
-#define P6_EVENT_CPU_CLOCKS_NOT_HALTED 0x79
-#define P6_NMI_EVENT P6_EVENT_CPU_CLOCKS_NOT_HALTED
+#define MSR_P4_MISC_ENABLE 0x1A0
+#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7)
+#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12)
+#define MSR_P4_PERFCTR0 0x300
+#define MSR_P4_CCCR0 0x360
+#define P4_ESCR_EVENT_SELECT(N) ((N)<<25)
+#define P4_ESCR_OS (1<<3)
+#define P4_ESCR_USR (1<<2)
+#define P4_CCCR_OVF_PMI0 (1<<26)
+#define P4_CCCR_OVF_PMI1 (1<<27)
+#define P4_CCCR_THRESHOLD(N) ((N)<<20)
+#define P4_CCCR_COMPLEMENT (1<<19)
+#define P4_CCCR_COMPARE (1<<18)
+#define P4_CCCR_REQUIRED (3<<16)
+#define P4_CCCR_ESCR_SELECT(N) ((N)<<13)
+#define P4_CCCR_ENABLE (1<<12)
+/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
+ CRU_ESCR0 (with any non-null event selector) through a complemented
+ max threshold. [IA32-Vol3, Section 14.9.9] */
+#define MSR_P4_IQ_COUNTER0 0x30C
+#define P4_NMI_CRU_ESCR0 (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR)
+#define P4_NMI_IQ_CCCR0 \
+ (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \
+ P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
+
+static __init inline int nmi_known_cpu(void)
+{
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ return boot_cpu_data.x86 == 15;
+ case X86_VENDOR_INTEL:
+ return boot_cpu_data.x86 == 15;
+ }
+ return 0;
+}
/* Run after command line and cpu_init init, but before all other checks */
void __init nmi_watchdog_default(void)
{
if (nmi_watchdog != NMI_DEFAULT)
return;
-
- /* For some reason the IO APIC watchdog doesn't work on the AMD
- 8111 chipset. For now switch to local APIC mode using
- perfctr0 there. On Intel CPUs we don't have code to handle
- the perfctr and the IO-APIC seems to work, so use that. */
-
- if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
- nmi_watchdog = NMI_LOCAL_APIC;
- printk(KERN_INFO
- "Using local APIC NMI watchdog using perfctr0\n");
- } else {
- printk(KERN_INFO "Using IO APIC NMI watchdog\n");
+ if (nmi_known_cpu())
+ nmi_watchdog = NMI_LOCAL_APIC;
+ else
nmi_watchdog = NMI_IO_APIC;
- }
}
-/* Why is there no CPUID flag for this? */
-static __init int cpu_has_lapic(void)
+#ifdef CONFIG_SMP
+/* The performance counters used by NMI_LOCAL_APIC don't trigger when
+ * the CPU is idle. To make sure the NMI watchdog really ticks on all
+ * CPUs during the test make them busy.
+ */
+static __init void nmi_cpu_busy(void *data)
{
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_INTEL:
- case X86_VENDOR_AMD:
- return boot_cpu_data.x86 >= 6;
- /* .... add more cpus here or find a different way to figure this out. */
- default:
- return 0;
- }
+ volatile int *endflag = data;
+ local_irq_enable();
+ /* Intentionally don't use cpu_relax here. This is
+ to make sure that the performance counter really ticks,
+ even if there is a simulator or similar that catches the
+ pause instruction. On a real HT machine this is fine because
+ all other CPUs are busy with "useless" delay loops and don't
+ care if they get somewhat less cycles. */
+ while (*endflag == 0)
+ barrier();
}
+#endif
-static int __init check_nmi_watchdog (void)
+int __init check_nmi_watchdog (void)
{
- int counts[NR_CPUS];
+ volatile int endflag = 0;
+ int *counts;
int cpu;
- if (nmi_watchdog == NMI_NONE)
- return 0;
+ counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
+ if (!counts)
+ return -1;
- if (nmi_watchdog == NMI_LOCAL_APIC && !cpu_has_lapic()) {
- nmi_watchdog = NMI_NONE;
- return -1;
- }
+ printk(KERN_INFO "testing NMI watchdog ... ");
- printk(KERN_INFO "Testing NMI watchdog ... ");
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
for (cpu = 0; cpu < NR_CPUS; cpu++)
counts[cpu] = cpu_pda[cpu].__nmi_count;
@@ -133,15 +161,22 @@
mdelay((10*1000)/nmi_hz); // wait 10 ticks
for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ if (!cpu_online(cpu))
+ continue;
if (cpu_pda[cpu].__nmi_count - counts[cpu] <= 5) {
- printk("CPU#%d: NMI appears to be stuck (%d)!\n",
+ endflag = 1;
+ printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
cpu,
+ counts[cpu],
cpu_pda[cpu].__nmi_count);
nmi_active = 0;
lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
+ nmi_perfctr_msr = 0;
+ kfree(counts);
return -1;
}
}
+ endflag = 1;
printk("OK.\n");
/* now that we know it works we can reduce NMI frequency to
@@ -149,10 +184,9 @@
if (nmi_watchdog == NMI_LOCAL_APIC)
nmi_hz = 1;
+ kfree(counts);
return 0;
}
-/* Have this called later during boot so counters are updating */
-late_initcall(check_nmi_watchdog);
int __init setup_nmi_watchdog(char *str)
{
@@ -170,7 +204,7 @@
if (nmi >= NMI_INVALID)
return 0;
- nmi_watchdog = nmi;
+ nmi_watchdog = nmi;
return 1;
}
@@ -185,7 +219,10 @@
wrmsr(MSR_K7_EVNTSEL0, 0, 0);
break;
case X86_VENDOR_INTEL:
- wrmsr(MSR_IA32_EVNTSEL0, 0, 0);
+ if (boot_cpu_data.x86 == 15) {
+ wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
+ wrmsr(MSR_P4_CRU_ESCR0, 0, 0);
+ }
break;
}
nmi_active = -1;
@@ -253,7 +290,7 @@
static int nmi_pm_active; /* nmi_active before suspend */
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
+static int lapic_nmi_suspend(struct sys_device *dev, u32 state)
{
nmi_pm_active = nmi_active;
disable_lapic_nmi_watchdog();
@@ -300,22 +337,27 @@
* Original code written by Keith Owens.
*/
+static void clear_msr_range(unsigned int base, unsigned int n)
+{
+ unsigned int i;
+
+ for(i = 0; i < n; ++i)
+ wrmsr(base+i, 0, 0);
+}
+
static void setup_k7_watchdog(void)
{
int i;
unsigned int evntsel;
- /* No check, so can start with slow frequency */
- nmi_hz = 1;
-
- /* XXX should check these in EFER */
-
nmi_perfctr_msr = MSR_K7_PERFCTR0;
for(i = 0; i < 4; ++i) {
/* Simulator may not support it */
- if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL))
+ if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL)) {
+ nmi_perfctr_msr = 0;
return;
+ }
wrmsrl(MSR_K7_PERFCTR0+i, 0UL);
}
@@ -325,12 +367,54 @@
| K7_NMI_EVENT;
wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
- wrmsrl(MSR_K7_PERFCTR0, -((u64)cpu_khz*1000) / nmi_hz);
+ wrmsr(MSR_K7_PERFCTR0, -(cpu_khz/nmi_hz*1000), -1);
apic_write(APIC_LVTPC, APIC_DM_NMI);
evntsel |= K7_EVNTSEL_ENABLE;
wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
}
+
+static int setup_p4_watchdog(void)
+{
+ unsigned int misc_enable, dummy;
+
+ rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy);
+ if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
+ return 0;
+
+ nmi_perfctr_msr = MSR_P4_IQ_COUNTER0;
+ nmi_p4_cccr_val = P4_NMI_IQ_CCCR0;
+#ifdef CONFIG_SMP
+ if (smp_num_siblings == 2)
+ nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1;
+#endif
+
+ if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL))
+ clear_msr_range(0x3F1, 2);
+ /* MSR 0x3F0 seems to have a default value of 0xFC00, but current
+ docs doesn't fully define it, so leave it alone for now. */
+ if (boot_cpu_data.x86_model >= 0x3) {
+ /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */
+ clear_msr_range(0x3A0, 26);
+ clear_msr_range(0x3BC, 3);
+ } else {
+ clear_msr_range(0x3A0, 31);
+ }
+ clear_msr_range(0x3C0, 6);
+ clear_msr_range(0x3C8, 6);
+ clear_msr_range(0x3E0, 2);
+ clear_msr_range(MSR_P4_CCCR0, 18);
+ clear_msr_range(MSR_P4_PERFCTR0, 18);
+
+ wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0);
+ wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0);
+ Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz/nmi_hz*1000));
+ wrmsr(MSR_P4_IQ_COUNTER0, -(cpu_khz/nmi_hz*1000), -1);
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
+ return 1;
+}
+
void setup_apic_nmi_watchdog(void)
{
switch (boot_cpu_data.x86_vendor) {
@@ -341,6 +425,13 @@
return;
setup_k7_watchdog();
break;
+ case X86_VENDOR_INTEL:
+ if (boot_cpu_data.x86 != 15)
+ return;
+ if (!setup_p4_watchdog())
+ return;
+ break;
+
default:
return;
}
@@ -355,56 +446,67 @@
*
* as these watchdog NMI IRQs are generated on every CPU, we only
* have to check the current processor.
- *
- * since NMIs don't listen to _any_ locks, we have to be extremely
- * careful not to rely on unsafe variables. The printk might lock
- * up though, so we have to break up any console locks first ...
- * [when there will be more tty-related locks, break them up
- * here too!]
*/
-static unsigned int
- last_irq_sums [NR_CPUS],
- alert_counter [NR_CPUS];
+static DEFINE_PER_CPU(unsigned, last_irq_sum);
+static DEFINE_PER_CPU(local_t, alert_counter);
+static DEFINE_PER_CPU(int, nmi_touch);
void touch_nmi_watchdog (void)
{
int i;
/*
- * Just reset the alert counters, (other CPUs might be
- * spinning on locks we hold):
+ * Tell other CPUs to reset their alert counters. We cannot
+ * do it ourselves because the alert count increase is not
+ * atomic.
*/
for (i = 0; i < NR_CPUS; i++)
- alert_counter[i] = 0;
+ per_cpu(nmi_touch, i) = 1;
}
void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason)
{
- int sum, cpu;
+ int sum;
+ int touched = 0;
- cpu = safe_smp_processor_id();
sum = read_pda(apic_timer_irqs);
- if (last_irq_sums[cpu] == sum) {
+ if (__get_cpu_var(nmi_touch)) {
+ __get_cpu_var(nmi_touch) = 0;
+ touched = 1;
+ }
+ if (!touched && __get_cpu_var(last_irq_sum) == sum) {
/*
* Ayiee, looks like this CPU is stuck ...
* wait a few IRQs (5 seconds) before doing the oops ...
*/
- alert_counter[cpu]++;
- if (alert_counter[cpu] == 5*nmi_hz) {
+ local_inc(&__get_cpu_var(alert_counter));
+ if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) {
if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
== NOTIFY_STOP) {
- alert_counter[cpu] = 0;
+ local_set(&__get_cpu_var(alert_counter), 0);
return;
}
die_nmi("NMI Watchdog detected LOCKUP on CPU%d", regs);
}
} else {
- last_irq_sums[cpu] = sum;
- alert_counter[cpu] = 0;
+ __get_cpu_var(last_irq_sum) = sum;
+ local_set(&__get_cpu_var(alert_counter), 0);
}
- if (nmi_perfctr_msr)
+ if (nmi_perfctr_msr) {
+ if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) {
+ /*
+ * P4 quirks:
+ * - An overflown perfctr will assert its interrupt
+ * until the OVF flag in its CCCR is cleared.
+ * - LVTPC is masked on interrupt and must be
+ * unmasked by the LVTPC handler.
+ */
+ wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ }
wrmsr(nmi_perfctr_msr, -(cpu_khz/nmi_hz*1000), -1);
+ }
}
static int dummy_nmi_callback(struct pt_regs * regs, int cpu)
diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86_64/kernel/pmtimer.c
new file mode 100644
index 0000000..feb5f10
--- /dev/null
+++ b/arch/x86_64/kernel/pmtimer.c
@@ -0,0 +1,101 @@
+/* Ported over from i386 by AK, original copyright was:
+ *
+ * (C) Dominik Brodowski <linux@brodo.de> 2003
+ *
+ * Driver to use the Power Management Timer (PMTMR) available in some
+ * southbridges as primary timing source for the Linux kernel.
+ *
+ * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c,
+ * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4.
+ *
+ * This file is licensed under the GPL v2.
+ *
+ * Dropped all the hardware bug workarounds for now. Hopefully they
+ * are not needed on 64bit chipsets.
+ */
+
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/cpumask.h>
+#include <asm/io.h>
+#include <asm/proto.h>
+#include <asm/msr.h>
+#include <asm/vsyscall.h>
+
+/* The I/O port the PMTMR resides at.
+ * The location is detected during setup_arch(),
+ * in arch/i386/kernel/acpi/boot.c */
+u32 pmtmr_ioport;
+
+/* value of the Power timer at last timer interrupt */
+static u32 offset_delay;
+static u32 last_pmtmr_tick;
+
+#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */
+
+static inline u32 cyc2us(u32 cycles)
+{
+ /* The Power Management Timer ticks at 3.579545 ticks per microsecond.
+ * 1 / PM_TIMER_FREQUENCY == 0.27936511 =~ 286/1024 [error: 0.024%]
+ *
+ * Even with HZ = 100, delta is at maximum 35796 ticks, so it can
+ * easily be multiplied with 286 (=0x11E) without having to fear
+ * u32 overflows.
+ */
+ cycles *= 286;
+ return (cycles >> 10);
+}
+
+int pmtimer_mark_offset(void)
+{
+ static int first_run = 1;
+ unsigned long tsc;
+ u32 lost;
+
+ u32 tick = inl(pmtmr_ioport);
+ u32 delta;
+
+ delta = cyc2us((tick - last_pmtmr_tick) & ACPI_PM_MASK);
+
+ last_pmtmr_tick = tick;
+ monotonic_base += delta * NSEC_PER_USEC;
+
+ delta += offset_delay;
+
+ lost = delta / (USEC_PER_SEC / HZ);
+ offset_delay = delta % (USEC_PER_SEC / HZ);
+
+ rdtscll(tsc);
+ vxtime.last_tsc = tsc - offset_delay * cpu_khz;
+
+ /* don't calculate delay for first run,
+ or if we've got less then a tick */
+ if (first_run || (lost < 1)) {
+ first_run = 0;
+ offset_delay = 0;
+ }
+
+ return lost - 1;
+}
+
+unsigned int do_gettimeoffset_pm(void)
+{
+ u32 now, offset, delta = 0;
+
+ offset = last_pmtmr_tick;
+ now = inl(pmtmr_ioport);
+ delta = (now - offset) & ACPI_PM_MASK;
+
+ return offset_delay + cyc2us(delta);
+}
+
+
+static int __init nopmtimer_setup(char *s)
+{
+ pmtmr_ioport = 0;
+ return 0;
+}
+
+__setup("nopmtimer", nopmtimer_setup);
diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c
index e26e86b..525f6a1 100644
--- a/arch/x86_64/kernel/ptrace.c
+++ b/arch/x86_64/kernel/ptrace.c
@@ -257,13 +257,13 @@
value &= 0xffff;
return 0;
case offsetof(struct user_regs_struct,fs_base):
- if (!((value >> 48) == 0 || (value >> 48) == 0xffff))
- return -EIO;
+ if (value >= TASK_SIZE)
+ return -EIO;
child->thread.fs = value;
return 0;
case offsetof(struct user_regs_struct,gs_base):
- if (!((value >> 48) == 0 || (value >> 48) == 0xffff))
- return -EIO;
+ if (value >= TASK_SIZE)
+ return -EIO;
child->thread.gs = value;
return 0;
case offsetof(struct user_regs_struct, eflags):
@@ -277,6 +277,11 @@
return -EIO;
value &= 0xffff;
break;
+ case offsetof(struct user_regs_struct, rip):
+ /* Check if the new RIP address is canonical */
+ if (value >= TASK_SIZE)
+ return -EIO;
+ break;
}
put_stack_long(child, regno - sizeof(struct pt_regs), value);
return 0;
@@ -375,7 +380,7 @@
break;
switch (addr) {
- case 0 ... sizeof(struct user_regs_struct):
+ case 0 ... sizeof(struct user_regs_struct) - sizeof(long):
tmp = getreg(child, addr);
break;
case offsetof(struct user, u_debugreg[0]):
@@ -420,7 +425,7 @@
break;
switch (addr) {
- case 0 ... sizeof(struct user_regs_struct):
+ case 0 ... sizeof(struct user_regs_struct) - sizeof(long):
ret = putreg(child, addr, data);
break;
/* Disallows to set a breakpoint into the vsyscall */
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 2129cf9..99f038e 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -719,7 +719,6 @@
}
}
-#ifdef CONFIG_SMP
/*
* On a AMD dual core setup the lower bits of the APIC id distingush the cores.
* Assumes number of cores is a power of two.
@@ -727,17 +726,26 @@
static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
- int cpu = c->x86_apicid;
+ int cpu = smp_processor_id();
int node = 0;
+ unsigned bits;
if (c->x86_num_cores == 1)
return;
- cpu_core_id[cpu] = cpu >> hweight32(c->x86_num_cores - 1);
+
+ bits = 0;
+ while ((1 << bits) < c->x86_num_cores)
+ bits++;
+
+ /* Low order bits define the core id (index of core in socket) */
+ cpu_core_id[cpu] = phys_proc_id[cpu] & ((1 << bits)-1);
+ /* Convert the APIC ID into the socket ID */
+ phys_proc_id[cpu] >>= bits;
#ifdef CONFIG_NUMA
/* When an ACPI SRAT table is available use the mappings from SRAT
instead. */
if (acpi_numa <= 0) {
- node = cpu_core_id[cpu];
+ node = phys_proc_id[cpu];
if (!node_online(node))
node = first_node(node_online_map);
cpu_to_node[cpu] = node;
@@ -745,15 +753,11 @@
node = cpu_to_node[cpu];
}
#endif
+
printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n",
cpu, c->x86_num_cores, node, cpu_core_id[cpu]);
#endif
}
-#else
-static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
-{
-}
-#endif
static int __init init_amd(struct cpuinfo_x86 *c)
{
@@ -925,7 +929,6 @@
c->x86_clflush_size = 64;
c->x86_cache_alignment = c->x86_clflush_size;
c->x86_num_cores = 1;
- c->x86_apicid = c == &boot_cpu_data ? 0 : c - cpu_data;
c->extended_cpuid_level = 0;
memset(&c->x86_capability, 0, sizeof c->x86_capability);
@@ -954,11 +957,14 @@
}
if (c->x86_capability[0] & (1<<19))
c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
- c->x86_apicid = misc >> 24;
} else {
/* Have CPUID level 0 only - unheard of */
c->x86 = 4;
}
+
+#ifdef CONFIG_SMP
+ phys_proc_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff;
+#endif
}
/*
@@ -1088,7 +1094,7 @@
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Other (Linux-defined) */
- "cxmmx", NULL, "cyrix_arr", "centaur_mcr", "k8c+",
+ "cxmmx", NULL, "cyrix_arr", "centaur_mcr", NULL,
"constant_tsc", NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c
index d439ced..429c026 100644
--- a/arch/x86_64/kernel/signal.c
+++ b/arch/x86_64/kernel/signal.c
@@ -28,6 +28,7 @@
#include <asm/uaccess.h>
#include <asm/i387.h>
#include <asm/proto.h>
+#include <asm/ia32_unistd.h>
/* #define DEBUG_SIG 1 */
@@ -452,7 +453,9 @@
regs->rip -= 2;
}
if (regs->rax == (unsigned long)-ERESTART_RESTARTBLOCK) {
- regs->rax = __NR_restart_syscall;
+ regs->rax = test_thread_flag(TIF_IA32) ?
+ __NR_ia32_restart_syscall :
+ __NR_restart_syscall;
regs->rip -= 2;
}
}
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index 73f7e8b..f1ec0f3 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -56,6 +56,7 @@
#include <asm/kdebug.h>
#include <asm/tlbflush.h>
#include <asm/proto.h>
+#include <asm/nmi.h>
/* Change for real CPU hotplug. Note other files need to be fixed
first too. */
@@ -93,6 +94,7 @@
cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned;
cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
+EXPORT_SYMBOL(cpu_core_map);
/*
* Trampoline 80x86 program as an array.
@@ -125,97 +127,211 @@
*c = boot_cpu_data;
identify_cpu(c);
+ print_cpu_info(c);
}
/*
- * Synchronize TSCs of CPUs
+ * New Funky TSC sync algorithm borrowed from IA64.
+ * Main advantage is that it doesn't reset the TSCs fully and
+ * in general looks more robust and it works better than my earlier
+ * attempts. I believe it was written by David Mosberger. Some minor
+ * adjustments for x86-64 by me -AK
*
- * This new algorithm is less accurate than the old "zero TSCs"
- * one, but we cannot zero TSCs anymore in the new hotplug CPU
- * model.
+ * Original comment reproduced below.
+ *
+ * Synchronize TSC of the current (slave) CPU with the TSC of the
+ * MASTER CPU (normally the time-keeper CPU). We use a closed loop to
+ * eliminate the possibility of unaccounted-for errors (such as
+ * getting a machine check in the middle of a calibration step). The
+ * basic idea is for the slave to ask the master what itc value it has
+ * and to read its own itc before and after the master responds. Each
+ * iteration gives us three timestamps:
+ *
+ * slave master
+ *
+ * t0 ---\
+ * ---\
+ * --->
+ * tm
+ * /---
+ * /---
+ * t1 <---
+ *
+ *
+ * The goal is to adjust the slave's TSC such that tm falls exactly
+ * half-way between t0 and t1. If we achieve this, the clocks are
+ * synchronized provided the interconnect between the slave and the
+ * master is symmetric. Even if the interconnect were asymmetric, we
+ * would still know that the synchronization error is smaller than the
+ * roundtrip latency (t0 - t1).
+ *
+ * When the interconnect is quiet and symmetric, this lets us
+ * synchronize the TSC to within one or two cycles. However, we can
+ * only *guarantee* that the synchronization is accurate to within a
+ * round-trip time, which is typically in the range of several hundred
+ * cycles (e.g., ~500 cycles). In practice, this means that the TSCs
+ * are usually almost perfectly synchronized, but we shouldn't assume
+ * that the accuracy is much better than half a micro second or so.
+ *
+ * [there are other errors like the latency of RDTSC and of the
+ * WRMSR. These can also account to hundreds of cycles. So it's
+ * probably worse. It claims 153 cycles error on a dual Opteron,
+ * but I suspect the numbers are actually somewhat worse -AK]
*/
-static atomic_t __cpuinitdata tsc_flag;
+#define MASTER 0
+#define SLAVE (SMP_CACHE_BYTES/8)
+
+/* Intentionally don't use cpu_relax() while TSC synchronization
+ because we don't want to go into funky power save modi or cause
+ hypervisors to schedule us away. Going to sleep would likely affect
+ latency and low latency is the primary objective here. -AK */
+#define no_cpu_relax() barrier()
+
static __cpuinitdata DEFINE_SPINLOCK(tsc_sync_lock);
-static unsigned long long __cpuinitdata bp_tsc, ap_tsc;
+static volatile __cpuinitdata unsigned long go[SLAVE + 1];
+static int notscsync __cpuinitdata;
-#define NR_LOOPS 5
+#undef DEBUG_TSC_SYNC
-static void __cpuinit sync_tsc_bp_init(int init)
+#define NUM_ROUNDS 64 /* magic value */
+#define NUM_ITERS 5 /* likewise */
+
+/* Callback on boot CPU */
+static __cpuinit void sync_master(void *arg)
{
- if (init)
- _raw_spin_lock(&tsc_sync_lock);
- else
- _raw_spin_unlock(&tsc_sync_lock);
- atomic_set(&tsc_flag, 0);
-}
+ unsigned long flags, i;
-/*
- * Synchronize TSC on AP with BP.
- */
-static void __cpuinit __sync_tsc_ap(void)
-{
- if (!cpu_has_tsc)
- return;
- Dprintk("AP %d syncing TSC\n", smp_processor_id());
-
- while (atomic_read(&tsc_flag) != 0)
- cpu_relax();
- atomic_inc(&tsc_flag);
- mb();
- _raw_spin_lock(&tsc_sync_lock);
- wrmsrl(MSR_IA32_TSC, bp_tsc);
- _raw_spin_unlock(&tsc_sync_lock);
- rdtscll(ap_tsc);
- mb();
- atomic_inc(&tsc_flag);
- mb();
-}
-
-static void __cpuinit sync_tsc_ap(void)
-{
- int i;
- for (i = 0; i < NR_LOOPS; i++)
- __sync_tsc_ap();
-}
-
-/*
- * Synchronize TSC from BP to AP.
- */
-static void __cpuinit __sync_tsc_bp(int cpu)
-{
- if (!cpu_has_tsc)
+ if (smp_processor_id() != boot_cpu_id)
return;
- /* Wait for AP */
- while (atomic_read(&tsc_flag) == 0)
- cpu_relax();
- /* Save BPs TSC */
- sync_core();
- rdtscll(bp_tsc);
- /* Don't do the sync core here to avoid too much latency. */
- mb();
- /* Start the AP */
- _raw_spin_unlock(&tsc_sync_lock);
- /* Wait for AP again */
- while (atomic_read(&tsc_flag) < 2)
- cpu_relax();
- rdtscl(bp_tsc);
- barrier();
-}
+ go[MASTER] = 0;
-static void __cpuinit sync_tsc_bp(int cpu)
-{
- int i;
- for (i = 0; i < NR_LOOPS - 1; i++) {
- __sync_tsc_bp(cpu);
- sync_tsc_bp_init(1);
+ local_irq_save(flags);
+ {
+ for (i = 0; i < NUM_ROUNDS*NUM_ITERS; ++i) {
+ while (!go[MASTER])
+ no_cpu_relax();
+ go[MASTER] = 0;
+ rdtscll(go[SLAVE]);
+ }
}
- __sync_tsc_bp(cpu);
- printk(KERN_INFO "Synced TSC of CPU %d difference %Ld\n",
- cpu, ap_tsc - bp_tsc);
+ local_irq_restore(flags);
}
+/*
+ * Return the number of cycles by which our tsc differs from the tsc
+ * on the master (time-keeper) CPU. A positive number indicates our
+ * tsc is ahead of the master, negative that it is behind.
+ */
+static inline long
+get_delta(long *rt, long *master)
+{
+ unsigned long best_t0 = 0, best_t1 = ~0UL, best_tm = 0;
+ unsigned long tcenter, t0, t1, tm;
+ int i;
+
+ for (i = 0; i < NUM_ITERS; ++i) {
+ rdtscll(t0);
+ go[MASTER] = 1;
+ while (!(tm = go[SLAVE]))
+ no_cpu_relax();
+ go[SLAVE] = 0;
+ rdtscll(t1);
+
+ if (t1 - t0 < best_t1 - best_t0)
+ best_t0 = t0, best_t1 = t1, best_tm = tm;
+ }
+
+ *rt = best_t1 - best_t0;
+ *master = best_tm - best_t0;
+
+ /* average best_t0 and best_t1 without overflow: */
+ tcenter = (best_t0/2 + best_t1/2);
+ if (best_t0 % 2 + best_t1 % 2 == 2)
+ ++tcenter;
+ return tcenter - best_tm;
+}
+
+static __cpuinit void sync_tsc(void)
+{
+ int i, done = 0;
+ long delta, adj, adjust_latency = 0;
+ unsigned long flags, rt, master_time_stamp, bound;
+#if DEBUG_TSC_SYNC
+ static struct syncdebug {
+ long rt; /* roundtrip time */
+ long master; /* master's timestamp */
+ long diff; /* difference between midpoint and master's timestamp */
+ long lat; /* estimate of tsc adjustment latency */
+ } t[NUM_ROUNDS] __cpuinitdata;
+#endif
+
+ go[MASTER] = 1;
+
+ smp_call_function(sync_master, NULL, 1, 0);
+
+ while (go[MASTER]) /* wait for master to be ready */
+ no_cpu_relax();
+
+ spin_lock_irqsave(&tsc_sync_lock, flags);
+ {
+ for (i = 0; i < NUM_ROUNDS; ++i) {
+ delta = get_delta(&rt, &master_time_stamp);
+ if (delta == 0) {
+ done = 1; /* let's lock on to this... */
+ bound = rt;
+ }
+
+ if (!done) {
+ unsigned long t;
+ if (i > 0) {
+ adjust_latency += -delta;
+ adj = -delta + adjust_latency/4;
+ } else
+ adj = -delta;
+
+ rdtscll(t);
+ wrmsrl(MSR_IA32_TSC, t + adj);
+ }
+#if DEBUG_TSC_SYNC
+ t[i].rt = rt;
+ t[i].master = master_time_stamp;
+ t[i].diff = delta;
+ t[i].lat = adjust_latency/4;
+#endif
+ }
+ }
+ spin_unlock_irqrestore(&tsc_sync_lock, flags);
+
+#if DEBUG_TSC_SYNC
+ for (i = 0; i < NUM_ROUNDS; ++i)
+ printk("rt=%5ld master=%5ld diff=%5ld adjlat=%5ld\n",
+ t[i].rt, t[i].master, t[i].diff, t[i].lat);
+#endif
+
+ printk(KERN_INFO
+ "CPU %d: synchronized TSC with CPU %u (last diff %ld cycles, "
+ "maxerr %lu cycles)\n",
+ smp_processor_id(), boot_cpu_id, delta, rt);
+}
+
+static void __cpuinit tsc_sync_wait(void)
+{
+ if (notscsync || !cpu_has_tsc)
+ return;
+ printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n", smp_processor_id(),
+ boot_cpu_id);
+ sync_tsc();
+}
+
+static __init int notscsync_setup(char *s)
+{
+ notscsync = 1;
+ return 0;
+}
+__setup("notscsync", notscsync_setup);
+
static atomic_t init_deasserted __cpuinitdata;
/*
@@ -315,11 +431,6 @@
cpu_init();
smp_callin();
- /*
- * Synchronize the TSC with the BP
- */
- sync_tsc_ap();
-
/* otherwise gcc will move up the smp_processor_id before the cpu_init */
barrier();
@@ -334,7 +445,6 @@
enable_8259A_irq(0);
}
-
enable_APIC_timer();
/*
@@ -343,6 +453,11 @@
cpu_set(smp_processor_id(), cpu_online_map);
mb();
+ /* Wait for TSC sync to not schedule things before.
+ We still process interrupts, which could see an inconsistent
+ time in that window unfortunately. */
+ tsc_sync_wait();
+
cpu_idle();
}
@@ -531,7 +646,6 @@
printk("failed fork for CPU %d\n", cpu);
return PTR_ERR(idle);
}
- x86_cpu_to_apicid[cpu] = apicid;
cpu_pda[cpu].pcurrent = idle;
@@ -600,8 +714,6 @@
if (cpu_isset(cpu, cpu_callin_map)) {
/* number CPUs logically, starting from 1 (BSP is 0) */
- Dprintk("OK.\n");
- print_cpu_info(&cpu_data[cpu]);
Dprintk("CPU has booted.\n");
} else {
boot_error = 1;
@@ -842,7 +954,6 @@
GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_id);
/* Or can we switch back to PIC here? */
}
- x86_cpu_to_apicid[0] = boot_cpu_id;
/*
* Now start the IO-APICs
@@ -889,18 +1000,14 @@
printk("__cpu_up: bad cpu %d\n", cpu);
return -EINVAL;
}
- sync_tsc_bp_init(1);
/* Boot it! */
err = do_boot_cpu(cpu, apicid);
if (err < 0) {
- sync_tsc_bp_init(0);
Dprintk("do_boot_cpu failed %d\n", err);
return err;
}
- sync_tsc_bp(cpu);
-
/* Unleash the CPU! */
Dprintk("waiting for cpu %d\n", cpu);
@@ -923,4 +1030,6 @@
detect_siblings();
time_init_gtod();
+
+ check_nmi_watchdog();
}
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 0e3b60e..fb8c809 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -26,6 +26,10 @@
#include <linux/sysdev.h>
#include <linux/bcd.h>
#include <linux/kallsyms.h>
+#include <linux/acpi.h>
+#ifdef CONFIG_ACPI
+#include <acpi/achware.h> /* for PM timer frequency */
+#endif
#include <asm/8253pit.h>
#include <asm/pgtable.h>
#include <asm/vsyscall.h>
@@ -396,6 +400,10 @@
(offset - vxtime.last)*(NSEC_PER_SEC/HZ) / hpet_tick;
vxtime.last = offset;
+#ifdef CONFIG_X86_PM_TIMER
+ } else if (vxtime.mode == VXTIME_PMTMR) {
+ lost = pmtimer_mark_offset();
+#endif
} else {
offset = (((tsc - vxtime.last_tsc) *
vxtime.tsc_quot) >> 32) - (USEC_PER_SEC / HZ);
@@ -898,6 +906,13 @@
hpet_period;
cpu_khz = hpet_calibrate_tsc();
timename = "HPET";
+#ifdef CONFIG_X86_PM_TIMER
+ } else if (pmtmr_ioport) {
+ vxtime_hz = PM_TIMER_FREQUENCY;
+ timename = "PM";
+ pit_init();
+ cpu_khz = pit_calibrate_tsc();
+#endif
} else {
pit_init();
cpu_khz = pit_calibrate_tsc();
@@ -923,35 +938,50 @@
}
/*
+ * Make an educated guess if the TSC is trustworthy and synchronized
+ * over all CPUs.
+ */
+static __init int unsynchronized_tsc(void)
+{
+#ifdef CONFIG_SMP
+ if (oem_force_hpet_timer())
+ return 1;
+ /* Intel systems are normally all synchronized. Exceptions
+ are handled in the OEM check above. */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+ return 0;
+ /* All in a single socket - should be synchronized */
+ if (cpus_weight(cpu_core_map[0]) == num_online_cpus())
+ return 0;
+#endif
+ /* Assume multi socket systems are not synchronized */
+ return num_online_cpus() > 1;
+}
+
+/*
* Decide after all CPUs are booted what mode gettimeofday should use.
*/
void __init time_init_gtod(void)
{
char *timetype;
- /*
- * AMD systems with more than one CPU don't have fully synchronized
- * TSCs. Always use HPET gettimeofday for these, although it is slower.
- * Intel SMP systems usually have synchronized TSCs, so use always
- * the TSC.
- *
- * Exceptions:
- * IBM Summit2 checked by oem_force_hpet_timer().
- * AMD dual core may also not need HPET. Check me.
- *
- * Can be turned off with "notsc".
- */
- if (num_online_cpus() > 1 &&
- boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
- notsc = 1;
- /* Some systems will want to disable TSC and use HPET. */
- if (oem_force_hpet_timer())
+ if (unsynchronized_tsc())
notsc = 1;
if (vxtime.hpet_address && notsc) {
timetype = "HPET";
vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
vxtime.mode = VXTIME_HPET;
do_gettimeoffset = do_gettimeoffset_hpet;
+#ifdef CONFIG_X86_PM_TIMER
+ /* Using PM for gettimeofday is quite slow, but we have no other
+ choice because the TSC is too unreliable on some systems. */
+ } else if (pmtmr_ioport && !vxtime.hpet_address && notsc) {
+ timetype = "PM";
+ do_gettimeoffset = do_gettimeoffset_pm;
+ vxtime.mode = VXTIME_PMTMR;
+ sysctl_vsyscall = 0;
+ printk(KERN_INFO "Disabling vsyscall due to use of PM timer\n");
+#endif
} else {
timetype = vxtime.hpet_address ? "HPET/TSC" : "PIT/TSC";
vxtime.mode = VXTIME_TSC;
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index 65a37f5..3dfec8f 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -332,10 +332,12 @@
printk(KERN_ALERT "Kernel BUG at %.50s:%d\n", f.filename, f.line);
}
+#ifdef CONFIG_BUG
void out_of_line_bug(void)
{
BUG();
}
+#endif
static DEFINE_SPINLOCK(die_lock);
static int die_owner = -1;
diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c
index b4b8dc5..2e57344 100644
--- a/arch/x86_64/kernel/vsyscall.c
+++ b/arch/x86_64/kernel/vsyscall.c
@@ -65,7 +65,7 @@
usec = (__xtime.tv_nsec / 1000) +
(__jiffies - __wall_jiffies) * (1000000 / HZ);
- if (__vxtime.mode == VXTIME_TSC) {
+ if (__vxtime.mode != VXTIME_HPET) {
sync_core();
rdtscll(t);
if (t < __vxtime.last_tsc)
@@ -217,8 +217,9 @@
BUG_ON((unsigned long) &vtime != VSYSCALL_ADDR(__NR_vtime));
BUG_ON((VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE)));
map_vsyscall();
- sysctl_vsyscall = 1;
+#ifdef CONFIG_SYSCTL
register_sysctl_table(kernel_root_table2, 0);
+#endif
return 0;
}
diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c
index a43dedb..68ec030 100644
--- a/arch/x86_64/kernel/x8664_ksyms.c
+++ b/arch/x86_64/kernel/x8664_ksyms.c
@@ -193,8 +193,9 @@
extern void do_softirq_thunk(void);
EXPORT_SYMBOL(do_softirq_thunk);
-void out_of_line_bug(void);
+#ifdef CONFIG_BUG
EXPORT_SYMBOL(out_of_line_bug);
+#endif
EXPORT_SYMBOL(init_level4_pgt);
diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c
index e033092..5d6b211 100644
--- a/arch/x86_64/mm/fault.c
+++ b/arch/x86_64/mm/fault.c
@@ -234,6 +234,8 @@
/*
* Handle a fault on the vmalloc or module mapping area
+ *
+ * This assumes no large pages in there.
*/
static int vmalloc_fault(unsigned long address)
{
@@ -272,7 +274,10 @@
if (!pte_present(*pte_ref))
return -1;
pte = pte_offset_kernel(pmd, address);
- if (!pte_present(*pte) || pte_page(*pte) != pte_page(*pte_ref))
+ /* Don't use pte_page here, because the mappings can point
+ outside mem_map, and the NUMA hash lookup cannot handle
+ that. */
+ if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref))
BUG();
__flush_tlb_all();
return 0;
@@ -346,7 +351,9 @@
* protection error (error_code & 1) == 0.
*/
if (unlikely(address >= TASK_SIZE)) {
- if (!(error_code & 5)) {
+ if (!(error_code & 5) &&
+ ((address >= VMALLOC_START && address < VMALLOC_END) ||
+ (address >= MODULES_VADDR && address < MODULES_END))) {
if (vmalloc_fault(address) < 0)
goto bad_area_nosemaphore;
return;
diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c
index 74ec855..58aac23 100644
--- a/arch/x86_64/mm/ioremap.c
+++ b/arch/x86_64/mm/ioremap.c
@@ -133,7 +133,7 @@
unsigned long flags)
{
int err = 0;
- if (flags && phys_addr + size - 1 < (end_pfn_map << PAGE_SHIFT)) {
+ if (phys_addr + size - 1 < (end_pfn_map << PAGE_SHIFT)) {
unsigned long npages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
unsigned long vaddr = (unsigned long) __va(phys_addr);
@@ -214,7 +214,7 @@
remove_vm_area((void *)(PAGE_MASK & (unsigned long) addr));
return NULL;
}
- if (ioremap_change_attr(phys_addr, size, flags) < 0) {
+ if (flags && ioremap_change_attr(phys_addr, size, flags) < 0) {
area->flags &= 0xffffff;
vunmap(addr);
return NULL;
@@ -251,7 +251,7 @@
void iounmap(volatile void __iomem *addr)
{
- struct vm_struct *p, **pprev;
+ struct vm_struct *p;
if (addr <= high_memory)
return;
@@ -260,24 +260,11 @@
return;
write_lock(&vmlist_lock);
- for (p = vmlist, pprev = &vmlist; p != NULL; pprev = &p->next, p = *pprev)
- if (p->addr == (void *)(PAGE_MASK & (unsigned long)addr))
- break;
- if (!p) {
- printk("__iounmap: bad address %p\n", addr);
- goto out_unlock;
- }
- *pprev = p->next;
- unmap_vm_area(p);
- if ((p->flags >> 20) &&
- p->phys_addr + p->size - 1 < virt_to_phys(high_memory)) {
- /* p->size includes the guard page, but cpa doesn't like that */
- change_page_attr(virt_to_page(__va(p->phys_addr)),
- p->size >> PAGE_SHIFT,
- PAGE_KERNEL);
- global_flush_tlb();
- }
-out_unlock:
+ p = __remove_vm_area((void *)((unsigned long)addr & PAGE_MASK));
+ if (!p)
+ printk("iounmap: bad address %p\n", addr);
+ else if (p->flags >> 20)
+ ioremap_change_attr(p->phys_addr, p->size, 0);
write_unlock(&vmlist_lock);
kfree(p);
}
diff --git a/crypto/crypto_null.c b/crypto/crypto_null.c
index f691d31..3fcf6e8 100644
--- a/crypto/crypto_null.c
+++ b/crypto/crypto_null.c
@@ -21,6 +21,7 @@
#include <linux/mm.h>
#include <asm/scatterlist.h>
#include <linux/crypto.h>
+#include <linux/string.h>
#define NULL_KEY_SIZE 0
#define NULL_BLOCK_SIZE 1
@@ -28,11 +29,13 @@
static int null_compress(void *ctx, const u8 *src, unsigned int slen,
u8 *dst, unsigned int *dlen)
-{ return 0; }
-
-static int null_decompress(void *ctx, const u8 *src, unsigned int slen,
- u8 *dst, unsigned int *dlen)
-{ return 0; }
+{
+ if (slen > *dlen)
+ return -EINVAL;
+ memcpy(dst, src, slen);
+ *dlen = slen;
+ return 0;
+}
static void null_init(void *ctx)
{ }
@@ -47,11 +50,10 @@
unsigned int keylen, u32 *flags)
{ return 0; }
-static void null_encrypt(void *ctx, u8 *dst, const u8 *src)
-{ }
-
-static void null_decrypt(void *ctx, u8 *dst, const u8 *src)
-{ }
+static void null_crypt(void *ctx, u8 *dst, const u8 *src)
+{
+ memcpy(dst, src, NULL_BLOCK_SIZE);
+}
static struct crypto_alg compress_null = {
.cra_name = "compress_null",
@@ -62,7 +64,7 @@
.cra_list = LIST_HEAD_INIT(compress_null.cra_list),
.cra_u = { .compress = {
.coa_compress = null_compress,
- .coa_decompress = null_decompress } }
+ .coa_decompress = null_compress } }
};
static struct crypto_alg digest_null = {
@@ -90,8 +92,8 @@
.cia_min_keysize = NULL_KEY_SIZE,
.cia_max_keysize = NULL_KEY_SIZE,
.cia_setkey = null_setkey,
- .cia_encrypt = null_encrypt,
- .cia_decrypt = null_decrypt } }
+ .cia_encrypt = null_crypt,
+ .cia_decrypt = null_crypt } }
};
MODULE_ALIAS("compress_null");
diff --git a/crypto/internal.h b/crypto/internal.h
index e68e438..964b9a6 100644
--- a/crypto/internal.h
+++ b/crypto/internal.h
@@ -38,7 +38,7 @@
static inline void crypto_yield(struct crypto_tfm *tfm)
{
- if (!in_softirq())
+ if (!in_atomic())
cond_resched();
}
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 0400a52..670fdb5 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -40,13 +40,12 @@
available at:
<http://www.acpi.info>
+if ACPI
+
config ACPI_BOOT
bool
- depends on ACPI || X86_HT
default y
-if ACPI
-
config ACPI_INTERPRETER
bool
depends on !IA64_SGI_SN
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 12b0eea..8093f2e 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -391,7 +391,6 @@
u8 pin = 0;
int edge_level = ACPI_LEVEL_SENSITIVE;
int active_high_low = ACPI_ACTIVE_LOW;
- extern int via_interrupt_line_quirk;
char *link = NULL;
ACPI_FUNCTION_TRACE("acpi_pci_irq_enable");
@@ -444,9 +443,6 @@
}
}
- if (via_interrupt_line_quirk)
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq & 15);
-
dev->irq = acpi_register_gsi(irq, edge_level, active_high_low);
printk(KERN_INFO PREFIX "PCI Interrupt %s[%c] -> ",
diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile
index d1dcd8e..5b77188 100644
--- a/drivers/atm/Makefile
+++ b/drivers/atm/Makefile
@@ -39,7 +39,8 @@
fore_200e-objs += fore200e_pca_fw.o
# guess the target endianess to choose the right PCA-200E firmware image
ifeq ($(CONFIG_ATM_FORE200E_PCA_DEFAULT_FW),y)
- CONFIG_ATM_FORE200E_PCA_FW = $(shell if test -n "`$(CC) -E -dM $(src)/../../include/asm/byteorder.h | grep ' __LITTLE_ENDIAN '`"; then echo $(obj)/pca200e.bin; else echo $(obj)/pca200e_ecd.bin2; fi)
+ byteorder.h := include$(if $(patsubst $(srctree),,$(objtree)),2)/asm/byteorder.h
+ CONFIG_ATM_FORE200E_PCA_FW := $(obj)/pca200e$(if $(shell $(CC) -E -dM $(byteorder.h) | grep ' __LITTLE_ENDIAN '),.bin,_ecd.bin2)
endif
endif
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index 9e65bfb..5f70219 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -383,8 +383,7 @@
switch(fore200e->state) {
case FORE200E_STATE_COMPLETE:
- if (fore200e->stats)
- kfree(fore200e->stats);
+ kfree(fore200e->stats);
case FORE200E_STATE_IRQ:
free_irq(fore200e->irq, fore200e->atm_dev);
@@ -963,8 +962,7 @@
entry, txq->tail, entry->vc_map, entry->skb);
/* free copy of misaligned data */
- if (entry->data)
- kfree(entry->data);
+ kfree(entry->data);
/* remove DMA mapping */
fore200e->bus->dma_unmap(fore200e, entry->tpd->tsd[ 0 ].buffer, entry->tpd->tsd[ 0 ].length,
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 3022c54..df2c83f 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -412,8 +412,7 @@
init_one_failure:
if (atm_dev)
atm_dev_deregister(atm_dev);
- if (he_dev)
- kfree(he_dev);
+ kfree(he_dev);
pci_disable_device(pci_dev);
return err;
}
@@ -2534,8 +2533,7 @@
open_failed:
if (err) {
- if (he_vcc)
- kfree(he_vcc);
+ kfree(he_vcc);
clear_bit(ATM_VF_ADDR, &vcc->flags);
}
else
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 85bf5c8..b2a7b75 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -676,10 +676,10 @@
PRINTK("nicstar%d: RSQ base at 0x%x.\n", i, (u32) card->rsq.base);
/* Initialize SCQ0, the only VBR SCQ used */
- card->scq1 = (scq_info *) NULL;
- card->scq2 = (scq_info *) NULL;
+ card->scq1 = NULL;
+ card->scq2 = NULL;
card->scq0 = get_scq(VBR_SCQSIZE, NS_VRSCD0);
- if (card->scq0 == (scq_info *) NULL)
+ if (card->scq0 == NULL)
{
printk("nicstar%d: can't get SCQ0.\n", i);
error = 12;
@@ -993,24 +993,24 @@
int i;
if (size != VBR_SCQSIZE && size != CBR_SCQSIZE)
- return (scq_info *) NULL;
+ return NULL;
scq = (scq_info *) kmalloc(sizeof(scq_info), GFP_KERNEL);
- if (scq == (scq_info *) NULL)
- return (scq_info *) NULL;
+ if (scq == NULL)
+ return NULL;
scq->org = kmalloc(2 * size, GFP_KERNEL);
if (scq->org == NULL)
{
kfree(scq);
- return (scq_info *) NULL;
+ return NULL;
}
scq->skb = (struct sk_buff **) kmalloc(sizeof(struct sk_buff *) *
(size / NS_SCQE_SIZE), GFP_KERNEL);
- if (scq->skb == (struct sk_buff **) NULL)
+ if (scq->skb == NULL)
{
kfree(scq->org);
kfree(scq);
- return (scq_info *) NULL;
+ return NULL;
}
scq->num_entries = size / NS_SCQE_SIZE;
scq->base = (ns_scqe *) ALIGN_ADDRESS(scq->org, size);
@@ -1498,7 +1498,7 @@
vc->cbr_scd = NS_FRSCD + frscdi * NS_FRSCD_SIZE;
scq = get_scq(CBR_SCQSIZE, vc->cbr_scd);
- if (scq == (scq_info *) NULL)
+ if (scq == NULL)
{
PRINTK("nicstar%d: can't get fixed rate SCQ.\n", card->index);
card->scd2vc[frscdi] = NULL;
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index 47a8005..8d5e65c 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -902,7 +902,7 @@
zatm_dev->tx_bw += vcc->qos.txtp.min_pcr;
dealloc_shaper(vcc->dev,zatm_vcc->shaper);
}
- if (zatm_vcc->ring) kfree(zatm_vcc->ring);
+ kfree(zatm_vcc->ring);
}
@@ -1339,12 +1339,9 @@
return 0;
out:
for (i = 0; i < NR_MBX; i++)
- if (zatm_dev->mbx_start[i] != 0)
- kfree((void *) zatm_dev->mbx_start[i]);
- if (zatm_dev->rx_map != NULL)
- kfree(zatm_dev->rx_map);
- if (zatm_dev->tx_map != NULL)
- kfree(zatm_dev->tx_map);
+ kfree(zatm_dev->mbx_start[i]);
+ kfree(zatm_dev->rx_map);
+ kfree(zatm_dev->tx_map);
free_irq(zatm_dev->irq, dev);
return error;
}
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 6662b54..a47928a2 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -1,6 +1,6 @@
# Makefile for the Linux device tree
-obj-y := core.o sys.o interface.o bus.o \
+obj-y := core.o sys.o bus.o \
driver.o class.o class_simple.o platform.o \
cpu.o firmware.o init.o map.o dmapool.o \
attribute_container.o transport_class.o
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 2b3902c..3cb04bb 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -390,7 +390,6 @@
sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj));
sysfs_remove_link(&dev->kobj, "driver");
list_del_init(&dev->driver_list);
- device_detach_shutdown(dev);
if (drv->remove)
drv->remove(dev);
dev->driver = NULL;
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 268a9c8..fbc2234 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -31,8 +31,6 @@
#define to_dev(obj) container_of(obj, struct device, kobj)
#define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
-extern struct attribute * dev_default_attrs[];
-
static ssize_t
dev_attr_show(struct kobject * kobj, struct attribute * attr, char * buf)
{
@@ -89,7 +87,6 @@
static struct kobj_type ktype_device = {
.release = device_release,
.sysfs_ops = &dev_sysfs_ops,
- .default_attrs = dev_default_attrs,
};
@@ -248,6 +245,7 @@
if ((error = kobject_add(&dev->kobj)))
goto Error;
+ kobject_hotplug(&dev->kobj, KOBJ_ADD);
if ((error = device_pm_add(dev)))
goto PMError;
if ((error = bus_add_device(dev)))
@@ -260,14 +258,13 @@
/* notify platform of device entry */
if (platform_notify)
platform_notify(dev);
-
- kobject_hotplug(&dev->kobj, KOBJ_ADD);
Done:
put_device(dev);
return error;
BusError:
device_pm_remove(dev);
PMError:
+ kobject_hotplug(&dev->kobj, KOBJ_REMOVE);
kobject_del(&dev->kobj);
Error:
if (parent)
diff --git a/drivers/base/interface.c b/drivers/base/interface.c
deleted file mode 100644
index bd51584..0000000
--- a/drivers/base/interface.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * drivers/base/interface.c - common driverfs interface that's exported to
- * the world for all devices.
- *
- * Copyright (c) 2002-3 Patrick Mochel
- * Copyright (c) 2002-3 Open Source Development Labs
- *
- * This file is released under the GPLv2
- *
- */
-
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/stat.h>
-#include <linux/string.h>
-
-/**
- * detach_state - control the default power state for the device.
- *
- * This is the state the device enters when it's driver module is
- * unloaded. The value is an unsigned integer, in the range of 0-4.
- * '0' indicates 'On', so no action will be taken when the driver is
- * unloaded. This is the default behavior.
- * '4' indicates 'Off', meaning the driver core will call the driver's
- * shutdown method to quiesce the device.
- * 1-3 indicate a low-power state for the device to enter via the
- * driver's suspend method.
- */
-
-static ssize_t detach_show(struct device * dev, char * buf)
-{
- return sprintf(buf, "%u\n", dev->detach_state);
-}
-
-static ssize_t detach_store(struct device * dev, const char * buf, size_t n)
-{
- u32 state;
- state = simple_strtoul(buf, NULL, 10);
- if (state > 4)
- return -EINVAL;
- dev->detach_state = state;
- return n;
-}
-
-static DEVICE_ATTR(detach_state, 0644, detach_show, detach_store);
-
-
-struct attribute * dev_default_attrs[] = {
- &dev_attr_detach_state.attr,
- NULL,
-};
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index e5eda74..2e700d7 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -1,18 +1,7 @@
-
-
-enum {
- DEVICE_PM_ON,
- DEVICE_PM1,
- DEVICE_PM2,
- DEVICE_PM3,
- DEVICE_PM_OFF,
-};
-
/*
* shutdown.c
*/
-extern int device_detach_shutdown(struct device *);
extern void device_shutdown(void);
diff --git a/drivers/base/power/resume.c b/drivers/base/power/resume.c
index f8f5055..2646897 100644
--- a/drivers/base/power/resume.c
+++ b/drivers/base/power/resume.c
@@ -22,8 +22,17 @@
int resume_device(struct device * dev)
{
- if (dev->bus && dev->bus->resume)
+ if (dev->power.pm_parent
+ && dev->power.pm_parent->power.power_state) {
+ dev_err(dev, "PM: resume from %d, parent %s still %d\n",
+ dev->power.power_state,
+ dev->power.pm_parent->bus_id,
+ dev->power.pm_parent->power.power_state);
+ }
+ if (dev->bus && dev->bus->resume) {
+ dev_dbg(dev,"resuming\n");
return dev->bus->resume(dev);
+ }
return 0;
}
diff --git a/drivers/base/power/shutdown.c b/drivers/base/power/shutdown.c
index d1e023f..f50a08b 100644
--- a/drivers/base/power/shutdown.c
+++ b/drivers/base/power/shutdown.c
@@ -19,20 +19,6 @@
extern struct subsystem devices_subsys;
-int device_detach_shutdown(struct device * dev)
-{
- if (!dev->detach_state)
- return 0;
-
- if (dev->detach_state == DEVICE_PM_OFF) {
- if (dev->driver && dev->driver->shutdown)
- dev->driver->shutdown(dev);
- return 0;
- }
- return dpm_runtime_suspend(dev, dev->detach_state);
-}
-
-
/**
* We handle system devices differently - we suspend and shut them
* down last and resume them first. That way, we don't do anything stupid like
@@ -52,13 +38,12 @@
struct device * dev;
down_write(&devices_subsys.rwsem);
- list_for_each_entry_reverse(dev, &devices_subsys.kset.list, kobj.entry) {
- pr_debug("shutting down %s: ", dev->bus_id);
+ list_for_each_entry_reverse(dev, &devices_subsys.kset.list,
+ kobj.entry) {
if (dev->driver && dev->driver->shutdown) {
- pr_debug("Ok\n");
+ dev_dbg(dev, "shutdown\n");
dev->driver->shutdown(dev);
- } else
- pr_debug("Ignored.\n");
+ }
}
up_write(&devices_subsys.rwsem);
diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c
index a0b5cf6..0ec44ef 100644
--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@@ -39,12 +39,25 @@
{
int error = 0;
- dev_dbg(dev, "suspending\n");
+ if (dev->power.power_state) {
+ dev_dbg(dev, "PM: suspend %d-->%d\n",
+ dev->power.power_state, state);
+ }
+ if (dev->power.pm_parent
+ && dev->power.pm_parent->power.power_state) {
+ dev_err(dev,
+ "PM: suspend %d->%d, parent %s already %d\n",
+ dev->power.power_state, state,
+ dev->power.pm_parent->bus_id,
+ dev->power.pm_parent->power.power_state);
+ }
dev->power.prev_state = dev->power.power_state;
- if (dev->bus && dev->bus->suspend && !dev->power.power_state)
+ if (dev->bus && dev->bus->suspend && !dev->power.power_state) {
+ dev_dbg(dev, "suspending\n");
error = dev->bus->suspend(dev, state);
+ }
return error;
}
diff --git a/drivers/block/ioctl.c b/drivers/block/ioctl.c
index 5e03f51..6d7bcc9 100644
--- a/drivers/block/ioctl.c
+++ b/drivers/block/ioctl.c
@@ -237,3 +237,5 @@
}
return ret;
}
+
+EXPORT_SYMBOL_GPL(blkdev_ioctl);
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 1a1fa3c..bc56770 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -914,8 +914,10 @@
bio = node->bio;
zone = ZONE(bio->bi_sector, pd);
list_for_each_entry(p, &pd->cdrw.pkt_active_list, list) {
- if (p->sector == zone)
+ if (p->sector == zone) {
+ bio = NULL;
goto try_next_bio;
+ }
}
break;
try_next_bio:
@@ -2019,7 +2021,13 @@
BUG_ON(pd->refcnt < 0);
pd->refcnt++;
- if (pd->refcnt == 1) {
+ if (pd->refcnt > 1) {
+ if ((file->f_mode & FMODE_WRITE) &&
+ !test_bit(PACKET_WRITABLE, &pd->flags)) {
+ ret = -EBUSY;
+ goto out_dec;
+ }
+ } else {
if (pkt_open_dev(pd, file->f_mode & FMODE_WRITE)) {
ret = -EIO;
goto out_dec;
@@ -2406,7 +2414,7 @@
case CDROM_LAST_WRITTEN:
case CDROM_SEND_PACKET:
case SCSI_IOCTL_SEND_COMMAND:
- return ioctl_by_bdev(pd->bdev, cmd, arg);
+ return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
case CDROMEJECT:
/*
@@ -2414,7 +2422,7 @@
* have to unlock it or else the eject command fails.
*/
pkt_lock_door(pd, 0);
- return ioctl_by_bdev(pd->bdev, cmd, arg);
+ return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
default:
printk("pktcdvd: Unknown ioctl for %s (%x)\n", pd->name, cmd);
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index ce42889..adc4dcc 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -8,13 +8,12 @@
* and is not licensed separately. See file COPYING for details.
*
* TODO (sorted by decreasing priority)
+ * -- Kill first_open (Al Viro fixed the block layer now)
* -- Do resets with usb_device_reset (needs a thread context, use khubd)
* -- set readonly flag for CDs, set removable flag for CF readers
* -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
- * -- support pphaneuf's SDDR-75 with two LUNs (also broken capacity...)
* -- special case some senses, e.g. 3a/0 -> no media present, reduce retries
* -- verify the 13 conditions and do bulk resets
- * -- normal pool of commands instead of cmdv[]?
* -- kill last_pipe and simply do two-state clearing on both pipes
* -- verify protocol (bulk) from USB descriptors (maybe...)
* -- highmem and sg
@@ -49,7 +48,14 @@
#define US_SC_SCSI 0x06 /* Transparent */
/*
+ * This many LUNs per USB device.
+ * Every one of them takes a host, see UB_MAX_HOSTS.
*/
+#define UB_MAX_LUNS 4
+
+/*
+ */
+
#define UB_MINORS_PER_MAJOR 8
#define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */
@@ -65,7 +71,7 @@
u32 Tag; /* unique per command id */
__le32 DataTransferLength; /* size of data */
u8 Flags; /* direction in bit 0 */
- u8 Lun; /* LUN normally 0 */
+ u8 Lun; /* LUN */
u8 Length; /* of of the CDB */
u8 CDB[UB_MAX_CDB_SIZE]; /* max command */
};
@@ -168,6 +174,7 @@
unsigned int len; /* Requested length */
// struct scatterlist sgv[UB_MAX_REQ_SG];
+ struct ub_lun *lun;
void (*done)(struct ub_dev *, struct ub_scsi_cmd *);
void *back;
};
@@ -252,25 +259,47 @@
};
/*
- * The UB device instance.
+ * The block device instance (one per LUN).
*/
-struct ub_dev {
- spinlock_t lock;
- int id; /* Number among ub's */
- atomic_t poison; /* The USB device is disconnected */
- int openc; /* protected by ub_lock! */
- /* kref is too implicit for our taste */
- unsigned int tagcnt;
+struct ub_lun {
+ struct ub_dev *udev;
+ struct list_head link;
+ struct gendisk *disk;
+ int id; /* Host index */
+ int num; /* LUN number */
+ char name[16];
+
int changed; /* Media was changed */
int removable;
int readonly;
int first_open; /* Kludge. See ub_bd_open. */
- char name[8];
+
+ /* Use Ingo's mempool if or when we have more than one command. */
+ /*
+ * Currently we never need more than one command for the whole device.
+ * However, giving every LUN a command is a cheap and automatic way
+ * to enforce fairness between them.
+ */
+ int cmda[1];
+ struct ub_scsi_cmd cmdv[1];
+
+ struct ub_capacity capacity;
+};
+
+/*
+ * The USB device instance.
+ */
+struct ub_dev {
+ spinlock_t lock;
+ atomic_t poison; /* The USB device is disconnected */
+ int openc; /* protected by ub_lock! */
+ /* kref is too implicit for our taste */
+ unsigned int tagcnt;
+ char name[12];
struct usb_device *dev;
struct usb_interface *intf;
- struct ub_capacity capacity;
- struct gendisk *disk;
+ struct list_head luns;
unsigned int send_bulk_pipe; /* cached pipe values */
unsigned int recv_bulk_pipe;
@@ -279,10 +308,6 @@
struct tasklet_struct tasklet;
- /* XXX Use Ingo's mempool (once we have more than one) */
- int cmda[1];
- struct ub_scsi_cmd cmdv[1];
-
struct ub_scsi_cmd_queue cmd_queue;
struct ub_scsi_cmd top_rqs_cmd; /* REQUEST SENSE */
unsigned char top_sense[UB_SENSE_SIZE];
@@ -301,9 +326,9 @@
/*
*/
static void ub_cleanup(struct ub_dev *sc);
-static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq);
-static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
- struct request *rq);
+static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq);
+static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_scsi_cmd *cmd, struct request *rq);
static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
struct request *rq);
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
@@ -320,8 +345,10 @@
static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
int stalled_pipe);
static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd);
-static int ub_sync_tur(struct ub_dev *sc);
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret);
+static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun);
+static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_capacity *ret);
+static int ub_probe_lun(struct ub_dev *sc, int lnum);
/*
*/
@@ -342,6 +369,7 @@
*/
#define UB_MAX_HOSTS 26
static char ub_hostv[UB_MAX_HOSTS];
+
static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */
/*
@@ -406,6 +434,8 @@
{
struct usb_interface *intf;
struct ub_dev *sc;
+ struct list_head *p;
+ struct ub_lun *lun;
int cnt;
unsigned long flags;
int nc, nh;
@@ -421,9 +451,15 @@
spin_lock_irqsave(&sc->lock, flags);
cnt += sprintf(page + cnt,
- "qlen %d qmax %d changed %d removable %d readonly %d\n",
- sc->cmd_queue.qlen, sc->cmd_queue.qmax,
- sc->changed, sc->removable, sc->readonly);
+ "qlen %d qmax %d\n",
+ sc->cmd_queue.qlen, sc->cmd_queue.qmax);
+
+ list_for_each (p, &sc->luns) {
+ lun = list_entry(p, struct ub_lun, link);
+ cnt += sprintf(page + cnt,
+ "lun %u changed %d removable %d readonly %d\n",
+ lun->num, lun->changed, lun->removable, lun->readonly);
+ }
if ((nc = sc->tr.cur + 1) == SCMD_TRACE_SZ) nc = 0;
for (j = 0; j < SCMD_TRACE_SZ; j++) {
@@ -523,53 +559,63 @@
*/
static void ub_cleanup(struct ub_dev *sc)
{
+ struct list_head *p;
+ struct ub_lun *lun;
request_queue_t *q;
- /* I don't think queue can be NULL. But... Stolen from sx8.c */
- if ((q = sc->disk->queue) != NULL)
- blk_cleanup_queue(q);
+ while (!list_empty(&sc->luns)) {
+ p = sc->luns.next;
+ lun = list_entry(p, struct ub_lun, link);
+ list_del(p);
- /*
- * If we zero disk->private_data BEFORE put_disk, we have to check
- * for NULL all over the place in open, release, check_media and
- * revalidate, because the block level semaphore is well inside the
- * put_disk. But we cannot zero after the call, because *disk is gone.
- * The sd.c is blatantly racy in this area.
- */
- /* disk->private_data = NULL; */
- put_disk(sc->disk);
- sc->disk = NULL;
+ /* I don't think queue can be NULL. But... Stolen from sx8.c */
+ if ((q = lun->disk->queue) != NULL)
+ blk_cleanup_queue(q);
+ /*
+ * If we zero disk->private_data BEFORE put_disk, we have
+ * to check for NULL all over the place in open, release,
+ * check_media and revalidate, because the block level
+ * semaphore is well inside the put_disk.
+ * But we cannot zero after the call, because *disk is gone.
+ * The sd.c is blatantly racy in this area.
+ */
+ /* disk->private_data = NULL; */
+ put_disk(lun->disk);
+ lun->disk = NULL;
- ub_id_put(sc->id);
+ ub_id_put(lun->id);
+ kfree(lun);
+ }
+
kfree(sc);
}
/*
* The "command allocator".
*/
-static struct ub_scsi_cmd *ub_get_cmd(struct ub_dev *sc)
+static struct ub_scsi_cmd *ub_get_cmd(struct ub_lun *lun)
{
struct ub_scsi_cmd *ret;
- if (sc->cmda[0])
+ if (lun->cmda[0])
return NULL;
- ret = &sc->cmdv[0];
- sc->cmda[0] = 1;
+ ret = &lun->cmdv[0];
+ lun->cmda[0] = 1;
return ret;
}
-static void ub_put_cmd(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
+static void ub_put_cmd(struct ub_lun *lun, struct ub_scsi_cmd *cmd)
{
- if (cmd != &sc->cmdv[0]) {
+ if (cmd != &lun->cmdv[0]) {
printk(KERN_WARNING "%s: releasing a foreign cmd %p\n",
- sc->name, cmd);
+ lun->name, cmd);
return;
}
- if (!sc->cmda[0]) {
- printk(KERN_WARNING "%s: releasing a free cmd\n", sc->name);
+ if (!lun->cmda[0]) {
+ printk(KERN_WARNING "%s: releasing a free cmd\n", lun->name);
return;
}
- sc->cmda[0] = 0;
+ lun->cmda[0] = 0;
}
/*
@@ -630,29 +676,30 @@
static void ub_bd_rq_fn(request_queue_t *q)
{
- struct ub_dev *sc = q->queuedata;
+ struct ub_lun *lun = q->queuedata;
struct request *rq;
while ((rq = elv_next_request(q)) != NULL) {
- if (ub_bd_rq_fn_1(sc, rq) != 0) {
+ if (ub_bd_rq_fn_1(lun, rq) != 0) {
blk_stop_queue(q);
break;
}
}
}
-static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq)
+static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq)
{
+ struct ub_dev *sc = lun->udev;
struct ub_scsi_cmd *cmd;
int rc;
- if (atomic_read(&sc->poison) || sc->changed) {
+ if (atomic_read(&sc->poison) || lun->changed) {
blkdev_dequeue_request(rq);
ub_end_rq(rq, 0);
return 0;
}
- if ((cmd = ub_get_cmd(sc)) == NULL)
+ if ((cmd = ub_get_cmd(lun)) == NULL)
return -1;
memset(cmd, 0, sizeof(struct ub_scsi_cmd));
@@ -661,32 +708,30 @@
if (blk_pc_request(rq)) {
rc = ub_cmd_build_packet(sc, cmd, rq);
} else {
- rc = ub_cmd_build_block(sc, cmd, rq);
+ rc = ub_cmd_build_block(sc, lun, cmd, rq);
}
if (rc != 0) {
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, 0);
- blk_start_queue(sc->disk->queue);
return 0;
}
-
cmd->state = UB_CMDST_INIT;
+ cmd->lun = lun;
cmd->done = ub_rw_cmd_done;
cmd->back = rq;
cmd->tag = sc->tagcnt++;
if ((rc = ub_submit_scsi(sc, cmd)) != 0) {
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, 0);
- blk_start_queue(sc->disk->queue);
return 0;
}
return 0;
}
-static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
- struct request *rq)
+static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_scsi_cmd *cmd, struct request *rq)
{
int ub_dir;
#if 0 /* We use rq->buffer for now */
@@ -707,7 +752,7 @@
sg = &cmd->sgv[0];
n_elem = blk_rq_map_sg(q, rq, sg);
if (n_elem <= 0) {
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, 0);
blk_start_queue(q);
return 0; /* request with no s/g entries? */
@@ -716,7 +761,7 @@
if (n_elem != 1) { /* Paranoia */
printk(KERN_WARNING "%s: request with %d segments\n",
sc->name, n_elem);
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, 0);
blk_start_queue(q);
return 0;
@@ -748,8 +793,8 @@
* The call to blk_queue_hardsect_size() guarantees that request
* is aligned, but it is given in terms of 512 byte units, always.
*/
- block = rq->sector >> sc->capacity.bshift;
- nblks = rq->nr_sectors >> sc->capacity.bshift;
+ block = rq->sector >> lun->capacity.bshift;
+ nblks = rq->nr_sectors >> lun->capacity.bshift;
cmd->cdb[0] = (ub_dir == UB_DIR_READ)? READ_10: WRITE_10;
/* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
@@ -803,7 +848,8 @@
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
{
struct request *rq = cmd->back;
- struct gendisk *disk = sc->disk;
+ struct ub_lun *lun = cmd->lun;
+ struct gendisk *disk = lun->disk;
request_queue_t *q = disk->queue;
int uptodate;
@@ -818,7 +864,7 @@
else
uptodate = 0;
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, uptodate);
blk_start_queue(q);
}
@@ -887,7 +933,7 @@
bcb->Tag = cmd->tag; /* Endianness is not important */
bcb->DataTransferLength = cpu_to_le32(cmd->len);
bcb->Flags = (cmd->dir == UB_DIR_READ) ? 0x80 : 0;
- bcb->Lun = 0; /* No multi-LUN yet */
+ bcb->Lun = (cmd->lun != NULL) ? cmd->lun->num : 0;
bcb->Length = cmd->cdb_len;
/* copy the command payload */
@@ -1002,9 +1048,8 @@
* The control pipe clears itself - nothing to do.
* XXX Might try to reset the device here and retry.
*/
- printk(KERN_NOTICE "%s: "
- "stall on control pipe for device %u\n",
- sc->name, sc->dev->devnum);
+ printk(KERN_NOTICE "%s: stall on control pipe\n",
+ sc->name);
goto Bad_End;
}
@@ -1025,9 +1070,8 @@
* The control pipe clears itself - nothing to do.
* XXX Might try to reset the device here and retry.
*/
- printk(KERN_NOTICE "%s: "
- "stall on control pipe for device %u\n",
- sc->name, sc->dev->devnum);
+ printk(KERN_NOTICE "%s: stall on control pipe\n",
+ sc->name);
goto Bad_End;
}
@@ -1046,9 +1090,8 @@
rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
if (rc != 0) {
printk(KERN_NOTICE "%s: "
- "unable to submit clear for device %u"
- " (code %d)\n",
- sc->name, sc->dev->devnum, rc);
+ "unable to submit clear (%d)\n",
+ sc->name, rc);
/*
* This is typically ENOMEM or some other such shit.
* Retrying is pointless. Just do Bad End on it...
@@ -1107,9 +1150,8 @@
rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
if (rc != 0) {
printk(KERN_NOTICE "%s: "
- "unable to submit clear for device %u"
- " (code %d)\n",
- sc->name, sc->dev->devnum, rc);
+ "unable to submit clear (%d)\n",
+ sc->name, rc);
/*
* This is typically ENOMEM or some other such shit.
* Retrying is pointless. Just do Bad End on it...
@@ -1140,9 +1182,8 @@
rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
if (rc != 0) {
printk(KERN_NOTICE "%s: "
- "unable to submit clear for device %u"
- " (code %d)\n",
- sc->name, sc->dev->devnum, rc);
+ "unable to submit clear (%d)\n",
+ sc->name, rc);
/*
* This is typically ENOMEM or some other such shit.
* Retrying is pointless. Just do Bad End on it...
@@ -1164,9 +1205,8 @@
* encounter such a thing, try to read the CSW again.
*/
if (++cmd->stat_count >= 4) {
- printk(KERN_NOTICE "%s: "
- "unable to get CSW on device %u\n",
- sc->name, sc->dev->devnum);
+ printk(KERN_NOTICE "%s: unable to get CSW\n",
+ sc->name);
goto Bad_End;
}
__ub_state_stat(sc, cmd);
@@ -1207,10 +1247,8 @@
*/
if (++cmd->stat_count >= 4) {
printk(KERN_NOTICE "%s: "
- "tag mismatch orig 0x%x reply 0x%x "
- "on device %u\n",
- sc->name, cmd->tag, bcs->Tag,
- sc->dev->devnum);
+ "tag mismatch orig 0x%x reply 0x%x\n",
+ sc->name, cmd->tag, bcs->Tag);
goto Bad_End;
}
__ub_state_stat(sc, cmd);
@@ -1244,8 +1282,8 @@
} else {
printk(KERN_WARNING "%s: "
- "wrong command state %d on device %u\n",
- sc->name, cmd->state, sc->dev->devnum);
+ "wrong command state %d\n",
+ sc->name, cmd->state);
goto Bad_End;
}
return;
@@ -1288,7 +1326,6 @@
if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
/* XXX Clear stalls */
- printk("%s: CSW #%d submit failed (%d)\n", sc->name, cmd->tag, rc); /* P3 */
ub_complete(&sc->work_done);
ub_state_done(sc, cmd, rc);
return;
@@ -1333,6 +1370,7 @@
scmd->state = UB_CMDST_INIT;
scmd->data = sc->top_sense;
scmd->len = UB_SENSE_SIZE;
+ scmd->lun = cmd->lun;
scmd->done = ub_top_sense_done;
scmd->back = cmd;
@@ -1411,14 +1449,14 @@
}
if (cmd != scmd->back) {
printk(KERN_WARNING "%s: "
- "sense done for wrong command 0x%x on device %u\n",
- sc->name, cmd->tag, sc->dev->devnum);
+ "sense done for wrong command 0x%x\n",
+ sc->name, cmd->tag);
return;
}
if (cmd->state != UB_CMDST_SENSE) {
printk(KERN_WARNING "%s: "
- "sense done with bad cmd state %d on device %u\n",
- sc->name, cmd->state, sc->dev->devnum);
+ "sense done with bad cmd state %d\n",
+ sc->name, cmd->state);
return;
}
@@ -1429,68 +1467,32 @@
ub_scsi_urb_compl(sc, cmd);
}
-#if 0
-/* Determine what the maximum LUN supported is */
-int usb_stor_Bulk_max_lun(struct us_data *us)
-{
- int result;
-
- /* issue the command */
- result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
- US_BULK_GET_MAX_LUN,
- USB_DIR_IN | USB_TYPE_CLASS |
- USB_RECIP_INTERFACE,
- 0, us->ifnum, us->iobuf, 1, HZ);
-
- /*
- * Some devices (i.e. Iomega Zip100) need this -- apparently
- * the bulk pipes get STALLed when the GetMaxLUN request is
- * processed. This is, in theory, harmless to all other devices
- * (regardless of if they stall or not).
- */
- if (result < 0) {
- usb_stor_clear_halt(us, us->recv_bulk_pipe);
- usb_stor_clear_halt(us, us->send_bulk_pipe);
- }
-
- US_DEBUGP("GetMaxLUN command result is %d, data is %d\n",
- result, us->iobuf[0]);
-
- /* if we have a successful request, return the result */
- if (result == 1)
- return us->iobuf[0];
-
- /* return the default -- no LUNs */
- return 0;
-}
-#endif
-
/*
* This is called from a process context.
*/
-static void ub_revalidate(struct ub_dev *sc)
+static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
{
- sc->readonly = 0; /* XXX Query this from the device */
+ lun->readonly = 0; /* XXX Query this from the device */
- sc->capacity.nsec = 0;
- sc->capacity.bsize = 512;
- sc->capacity.bshift = 0;
+ lun->capacity.nsec = 0;
+ lun->capacity.bsize = 512;
+ lun->capacity.bshift = 0;
- if (ub_sync_tur(sc) != 0)
+ if (ub_sync_tur(sc, lun) != 0)
return; /* Not ready */
- sc->changed = 0;
+ lun->changed = 0;
- if (ub_sync_read_cap(sc, &sc->capacity) != 0) {
+ if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
/*
* The retry here means something is wrong, either with the
* device, with the transport, or with our code.
* We keep this because sd.c has retries for capacity.
*/
- if (ub_sync_read_cap(sc, &sc->capacity) != 0) {
- sc->capacity.nsec = 0;
- sc->capacity.bsize = 512;
- sc->capacity.bshift = 0;
+ if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
+ lun->capacity.nsec = 0;
+ lun->capacity.bsize = 512;
+ lun->capacity.bshift = 0;
}
}
}
@@ -1503,12 +1505,15 @@
static int ub_bd_open(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
+ struct ub_lun *lun;
struct ub_dev *sc;
unsigned long flags;
int rc;
- if ((sc = disk->private_data) == NULL)
+ if ((lun = disk->private_data) == NULL)
return -ENXIO;
+ sc = lun->udev;
+
spin_lock_irqsave(&ub_lock, flags);
if (atomic_read(&sc->poison)) {
spin_unlock_irqrestore(&ub_lock, flags);
@@ -1529,15 +1534,15 @@
* The bottom line is, Al Viro says that we should not allow
* bdev->bd_invalidated to be set when doing add_disk no matter what.
*/
- if (sc->first_open) {
- if (sc->changed) {
- sc->first_open = 0;
+ if (lun->first_open) {
+ lun->first_open = 0;
+ if (lun->changed) {
rc = -ENOMEDIUM;
goto err_open;
}
}
- if (sc->removable || sc->readonly)
+ if (lun->removable || lun->readonly)
check_disk_change(inode->i_bdev);
/*
@@ -1545,12 +1550,12 @@
* under some pretty murky conditions (a failure of READ CAPACITY).
* We may need it one day.
*/
- if (sc->removable && sc->changed && !(filp->f_flags & O_NDELAY)) {
+ if (lun->removable && lun->changed && !(filp->f_flags & O_NDELAY)) {
rc = -ENOMEDIUM;
goto err_open;
}
- if (sc->readonly && (filp->f_mode & FMODE_WRITE)) {
+ if (lun->readonly && (filp->f_mode & FMODE_WRITE)) {
rc = -EROFS;
goto err_open;
}
@@ -1567,7 +1572,8 @@
static int ub_bd_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ub_dev *sc = disk->private_data;
+ struct ub_lun *lun = disk->private_data;
+ struct ub_dev *sc = lun->udev;
ub_put(sc);
return 0;
@@ -1597,20 +1603,14 @@
*/
static int ub_bd_revalidate(struct gendisk *disk)
{
- struct ub_dev *sc = disk->private_data;
+ struct ub_lun *lun = disk->private_data;
- ub_revalidate(sc);
- /* This is pretty much a long term P3 */
- if (!atomic_read(&sc->poison)) { /* Cover sc->dev */
- printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n",
- sc->name, sc->dev->devnum,
- sc->capacity.nsec, sc->capacity.bsize);
- }
+ ub_revalidate(lun->udev, lun);
/* XXX Support sector size switching like in sr.c */
- blk_queue_hardsect_size(disk->queue, sc->capacity.bsize);
- set_capacity(disk, sc->capacity.nsec);
- // set_disk_ro(sdkp->disk, sc->readonly);
+ blk_queue_hardsect_size(disk->queue, lun->capacity.bsize);
+ set_capacity(disk, lun->capacity.nsec);
+ // set_disk_ro(sdkp->disk, lun->readonly);
return 0;
}
@@ -1626,9 +1626,9 @@
*/
static int ub_bd_media_changed(struct gendisk *disk)
{
- struct ub_dev *sc = disk->private_data;
+ struct ub_lun *lun = disk->private_data;
- if (!sc->removable)
+ if (!lun->removable)
return 0;
/*
@@ -1640,12 +1640,12 @@
* will fail, then block layer discards the data. Since we never
* spin drives up, such devices simply cannot be used with ub anyway.
*/
- if (ub_sync_tur(sc) != 0) {
- sc->changed = 1;
+ if (ub_sync_tur(lun->udev, lun) != 0) {
+ lun->changed = 1;
return 1;
}
- return sc->changed;
+ return lun->changed;
}
static struct block_device_operations ub_bd_fops = {
@@ -1669,7 +1669,7 @@
/*
* Test if the device has a check condition on it, synchronously.
*/
-static int ub_sync_tur(struct ub_dev *sc)
+static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun)
{
struct ub_scsi_cmd *cmd;
enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) };
@@ -1688,6 +1688,7 @@
cmd->cdb_len = 6;
cmd->dir = UB_DIR_NONE;
cmd->state = UB_CMDST_INIT;
+ cmd->lun = lun; /* This may be NULL, but that's ok */
cmd->done = ub_probe_done;
cmd->back = &compl;
@@ -1718,7 +1719,8 @@
/*
* Read the SCSI capacity synchronously (for probing).
*/
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret)
+static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_capacity *ret)
{
struct ub_scsi_cmd *cmd;
char *p;
@@ -1743,6 +1745,7 @@
cmd->state = UB_CMDST_INIT;
cmd->data = p;
cmd->len = 8;
+ cmd->lun = lun;
cmd->done = ub_probe_done;
cmd->back = &compl;
@@ -1812,6 +1815,90 @@
}
/*
+ * Get number of LUNs by the way of Bulk GetMaxLUN command.
+ */
+static int ub_sync_getmaxlun(struct ub_dev *sc)
+{
+ int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
+ unsigned char *p;
+ enum { ALLOC_SIZE = 1 };
+ struct usb_ctrlrequest *cr;
+ struct completion compl;
+ struct timer_list timer;
+ int nluns;
+ int rc;
+
+ init_completion(&compl);
+
+ rc = -ENOMEM;
+ if ((p = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
+ goto err_alloc;
+ *p = 55;
+
+ cr = &sc->work_cr;
+ cr->bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+ cr->bRequest = US_BULK_GET_MAX_LUN;
+ cr->wValue = cpu_to_le16(0);
+ cr->wIndex = cpu_to_le16(ifnum);
+ cr->wLength = cpu_to_le16(1);
+
+ usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
+ (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
+ sc->work_urb.transfer_flags = 0;
+ sc->work_urb.actual_length = 0;
+ sc->work_urb.error_count = 0;
+ sc->work_urb.status = 0;
+
+ if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
+ if (rc == -EPIPE) {
+ printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+ sc->name); /* P3 */
+ } else {
+ printk(KERN_WARNING
+ "%s: Unable to submit GetMaxLUN (%d)\n",
+ sc->name, rc);
+ }
+ goto err_submit;
+ }
+
+ init_timer(&timer);
+ timer.function = ub_probe_timeout;
+ timer.data = (unsigned long) &compl;
+ timer.expires = jiffies + UB_CTRL_TIMEOUT;
+ add_timer(&timer);
+
+ wait_for_completion(&compl);
+
+ del_timer_sync(&timer);
+ usb_kill_urb(&sc->work_urb);
+
+ if (sc->work_urb.actual_length != 1) {
+ printk("%s: GetMaxLUN returned %d bytes\n", sc->name,
+ sc->work_urb.actual_length); /* P3 */
+ nluns = 0;
+ } else {
+ if ((nluns = *p) == 55) {
+ nluns = 0;
+ } else {
+ /* GetMaxLUN returns the maximum LUN number */
+ nluns += 1;
+ if (nluns > UB_MAX_LUNS)
+ nluns = UB_MAX_LUNS;
+ }
+ printk("%s: GetMaxLUN returned %d, using %d LUNs\n", sc->name,
+ *p, nluns); /* P3 */
+ }
+
+ kfree(p);
+ return nluns;
+
+err_submit:
+ kfree(p);
+err_alloc:
+ return rc;
+}
+
+/*
* Clear initial stalls.
*/
static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
@@ -1897,8 +1984,8 @@
}
if (ep_in == NULL || ep_out == NULL) {
- printk(KERN_NOTICE "%s: device %u failed endpoint check\n",
- sc->name, sc->dev->devnum);
+ printk(KERN_NOTICE "%s: failed endpoint check\n",
+ sc->name);
return -EIO;
}
@@ -1921,8 +2008,7 @@
const struct usb_device_id *dev_id)
{
struct ub_dev *sc;
- request_queue_t *q;
- struct gendisk *disk;
+ int nluns;
int rc;
int i;
@@ -1931,6 +2017,7 @@
goto err_core;
memset(sc, 0, sizeof(struct ub_dev));
spin_lock_init(&sc->lock);
+ INIT_LIST_HEAD(&sc->luns);
usb_init_urb(&sc->work_urb);
tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc);
atomic_set(&sc->poison, 0);
@@ -1942,19 +2029,16 @@
ub_init_completion(&sc->work_done);
sc->work_done.done = 1; /* A little yuk, but oh well... */
- rc = -ENOSR;
- if ((sc->id = ub_id_get()) == -1)
- goto err_id;
- snprintf(sc->name, 8, DRV_NAME "%c", sc->id + 'a');
-
sc->dev = interface_to_usbdev(intf);
sc->intf = intf;
// sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-
usb_set_intfdata(intf, sc);
usb_get_dev(sc->dev);
// usb_get_intf(sc->intf); /* Do we need this? */
+ snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
+ sc->dev->bus->busnum, sc->dev->devnum);
+
/* XXX Verify that we can handle the device (from descriptors) */
ub_get_pipes(sc, sc->dev, intf);
@@ -1992,35 +2076,88 @@
* In any case it's not our business how revaliadation is implemented.
*/
for (i = 0; i < 3; i++) { /* Retries for benh's key */
- if ((rc = ub_sync_tur(sc)) <= 0) break;
+ if ((rc = ub_sync_tur(sc, NULL)) <= 0) break;
if (rc != 0x6) break;
msleep(10);
}
- sc->removable = 1; /* XXX Query this from the device */
- sc->changed = 1; /* ub_revalidate clears only */
- sc->first_open = 1;
+ nluns = 1;
+ for (i = 0; i < 3; i++) {
+ if ((rc = ub_sync_getmaxlun(sc)) < 0) {
+ /*
+ * Some devices (i.e. Iomega Zip100) need this --
+ * apparently the bulk pipes get STALLed when the
+ * GetMaxLUN request is processed.
+ * XXX I have a ZIP-100, verify it does this.
+ */
+ if (rc == -EPIPE) {
+ ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
+ ub_probe_clear_stall(sc, sc->send_bulk_pipe);
+ }
+ break;
+ }
+ if (rc != 0) {
+ nluns = rc;
+ break;
+ }
+ mdelay(100);
+ }
- ub_revalidate(sc);
- /* This is pretty much a long term P3 */
- printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n",
- sc->name, sc->dev->devnum, sc->capacity.nsec, sc->capacity.bsize);
+ for (i = 0; i < nluns; i++) {
+ ub_probe_lun(sc, i);
+ }
+ return 0;
- /*
- * Just one disk per sc currently, but maybe more.
- */
+ /* device_remove_file(&sc->intf->dev, &dev_attr_diag); */
+err_diag:
+ usb_set_intfdata(intf, NULL);
+ // usb_put_intf(sc->intf);
+ usb_put_dev(sc->dev);
+ kfree(sc);
+err_core:
+ return rc;
+}
+
+static int ub_probe_lun(struct ub_dev *sc, int lnum)
+{
+ struct ub_lun *lun;
+ request_queue_t *q;
+ struct gendisk *disk;
+ int rc;
+
+ rc = -ENOMEM;
+ if ((lun = kmalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL)
+ goto err_alloc;
+ memset(lun, 0, sizeof(struct ub_lun));
+ lun->num = lnum;
+
+ rc = -ENOSR;
+ if ((lun->id = ub_id_get()) == -1)
+ goto err_id;
+
+ lun->udev = sc;
+ list_add(&lun->link, &sc->luns);
+
+ snprintf(lun->name, 16, DRV_NAME "%c(%d.%d.%d)",
+ lun->id + 'a', sc->dev->bus->busnum, sc->dev->devnum, lun->num);
+
+ lun->removable = 1; /* XXX Query this from the device */
+ lun->changed = 1; /* ub_revalidate clears only */
+ lun->first_open = 1;
+ ub_revalidate(sc, lun);
+
rc = -ENOMEM;
if ((disk = alloc_disk(UB_MINORS_PER_MAJOR)) == NULL)
goto err_diskalloc;
- sc->disk = disk;
- sprintf(disk->disk_name, DRV_NAME "%c", sc->id + 'a');
- sprintf(disk->devfs_name, DEVFS_NAME "/%c", sc->id + 'a');
+ lun->disk = disk;
+ sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a');
+ sprintf(disk->devfs_name, DEVFS_NAME "/%c", lun->id + 'a');
disk->major = UB_MAJOR;
- disk->first_minor = sc->id * UB_MINORS_PER_MAJOR;
+ disk->first_minor = lun->id * UB_MINORS_PER_MAJOR;
disk->fops = &ub_bd_fops;
- disk->private_data = sc;
- disk->driverfs_dev = &intf->dev;
+ disk->private_data = lun;
+ disk->driverfs_dev = &sc->intf->dev; /* XXX Many to one ok? */
rc = -ENOMEM;
if ((q = blk_init_queue(ub_bd_rq_fn, &sc->lock)) == NULL)
@@ -2028,28 +2165,17 @@
disk->queue = q;
- // blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
+ blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
blk_queue_max_hw_segments(q, UB_MAX_REQ_SG);
blk_queue_max_phys_segments(q, UB_MAX_REQ_SG);
- // blk_queue_segment_boundary(q, CARM_SG_BOUNDARY);
+ blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */
blk_queue_max_sectors(q, UB_MAX_SECTORS);
- blk_queue_hardsect_size(q, sc->capacity.bsize);
+ blk_queue_hardsect_size(q, lun->capacity.bsize);
- /*
- * This is a serious infraction, caused by a deficiency in the
- * USB sg interface (usb_sg_wait()). We plan to remove this once
- * we get mileage on the driver and can justify a change to USB API.
- * See blk_queue_bounce_limit() to understand this part.
- *
- * XXX And I still need to be aware of the DMA mask in the HC.
- */
- q->bounce_pfn = blk_max_low_pfn;
- q->bounce_gfp = GFP_NOIO;
+ q->queuedata = lun;
- q->queuedata = sc;
-
- set_capacity(disk, sc->capacity.nsec);
- if (sc->removable)
+ set_capacity(disk, lun->capacity.nsec);
+ if (lun->removable)
disk->flags |= GENHD_FL_REMOVABLE;
add_disk(disk);
@@ -2059,22 +2185,20 @@
err_blkqinit:
put_disk(disk);
err_diskalloc:
- device_remove_file(&sc->intf->dev, &dev_attr_diag);
-err_diag:
- usb_set_intfdata(intf, NULL);
- // usb_put_intf(sc->intf);
- usb_put_dev(sc->dev);
- ub_id_put(sc->id);
+ list_del(&lun->link);
+ ub_id_put(lun->id);
err_id:
- kfree(sc);
-err_core:
+ kfree(lun);
+err_alloc:
return rc;
}
static void ub_disconnect(struct usb_interface *intf)
{
struct ub_dev *sc = usb_get_intfdata(intf);
- struct gendisk *disk = sc->disk;
+ struct list_head *p;
+ struct ub_lun *lun;
+ struct gendisk *disk;
unsigned long flags;
/*
@@ -2124,14 +2248,18 @@
/*
* Unregister the upper layer.
*/
- if (disk->flags & GENHD_FL_UP)
- del_gendisk(disk);
- /*
- * I wish I could do:
- * set_bit(QUEUE_FLAG_DEAD, &q->queue_flags);
- * As it is, we rely on our internal poisoning and let
- * the upper levels to spin furiously failing all the I/O.
- */
+ list_for_each (p, &sc->luns) {
+ lun = list_entry(p, struct ub_lun, link);
+ disk = lun->disk;
+ if (disk->flags & GENHD_FL_UP)
+ del_gendisk(disk);
+ /*
+ * I wish I could do:
+ * set_bit(QUEUE_FLAG_DEAD, &q->queue_flags);
+ * As it is, we rely on our internal poisoning and let
+ * the upper levels to spin furiously failing all the I/O.
+ */
+ }
/*
* Taking a lock on a structure which is about to be freed
@@ -2182,8 +2310,8 @@
{
int rc;
- /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu\n",
- sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev));
+ /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n",
+ sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun));
if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
goto err_regblkdev;
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index fcca26c..38dd9ff 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -488,6 +488,20 @@
& (CDC_DVD_RAM | CDC_RAM)) != 0;
}
break;
+ case GPCMD_GET_CONFIGURATION:
+ if (cgc->cmd[3] == CDF_RWRT) {
+ struct rwrt_feature_desc *rfd = (struct rwrt_feature_desc *)(cgc->buffer + sizeof(struct feature_header));
+
+ if ((buflen >=
+ (sizeof(struct feature_header) + sizeof(*rfd))) &&
+ (cdi->ops->capability & ~cdi->mask
+ & (CDC_DVD_RAM | CDC_RAM))) {
+ rfd->feature_code = cpu_to_be16(CDF_RWRT);
+ rfd->curr = 1;
+ ret = 0;
+ }
+ }
+ break;
default:
if (cgc->sense) {
/* indicate Unknown code */
diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c
index 49d67f5..6dc765d 100644
--- a/drivers/char/ipmi/ipmi_devintf.c
+++ b/drivers/char/ipmi/ipmi_devintf.c
@@ -44,6 +44,7 @@
#include <linux/ipmi.h>
#include <asm/semaphore.h>
#include <linux/init.h>
+#include <linux/device.h>
#define IPMI_DEVINTF_VERSION "v33"
@@ -519,15 +520,21 @@
" interface. Other values will set the major device number"
" to that value.");
+static struct class_simple *ipmi_class;
+
static void ipmi_new_smi(int if_num)
{
- devfs_mk_cdev(MKDEV(ipmi_major, if_num),
- S_IFCHR | S_IRUSR | S_IWUSR,
+ dev_t dev = MKDEV(ipmi_major, if_num);
+
+ devfs_mk_cdev(dev, S_IFCHR | S_IRUSR | S_IWUSR,
"ipmidev/%d", if_num);
+
+ class_simple_device_add(ipmi_class, dev, NULL, "ipmi%d", if_num);
}
static void ipmi_smi_gone(int if_num)
{
+ class_simple_device_remove(MKDEV(ipmi_major, if_num));
devfs_remove("ipmidev/%d", if_num);
}
@@ -548,8 +555,15 @@
printk(KERN_INFO "ipmi device interface version "
IPMI_DEVINTF_VERSION "\n");
+ ipmi_class = class_simple_create(THIS_MODULE, "ipmi");
+ if (IS_ERR(ipmi_class)) {
+ printk(KERN_ERR "ipmi: can't register device class\n");
+ return PTR_ERR(ipmi_class);
+ }
+
rv = register_chrdev(ipmi_major, DEVICE_NAME, &ipmi_fops);
if (rv < 0) {
+ class_simple_destroy(ipmi_class);
printk(KERN_ERR "ipmi: can't get major %d\n", ipmi_major);
return rv;
}
@@ -563,6 +577,7 @@
rv = ipmi_smi_watcher_register(&smi_watcher);
if (rv) {
unregister_chrdev(ipmi_major, DEVICE_NAME);
+ class_simple_destroy(ipmi_class);
printk(KERN_WARNING "ipmi: can't register smi watcher\n");
return rv;
}
@@ -573,6 +588,7 @@
static __exit void cleanup_ipmi(void)
{
+ class_simple_destroy(ipmi_class);
ipmi_smi_watcher_unregister(&smi_watcher);
devfs_remove(DEVICE_NAME);
unregister_chrdev(ipmi_major, DEVICE_NAME);
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index a2e33ec..ca5f42b 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -122,7 +122,7 @@
{
struct block_device *bdev = filp->private_data;
- return ioctl_by_bdev(bdev, command, arg);
+ return blkdev_ioctl(bdev->bd_inode, NULL, command, arg);
}
static void bind_device(struct raw_config_request *rq)
diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
index c337978..b14d642 100644
--- a/drivers/char/watchdog/i8xx_tco.c
+++ b/drivers/char/watchdog/i8xx_tco.c
@@ -382,6 +382,7 @@
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID, PCI_ANY_ID, },
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE (pci, i8xx_tco_pci_tbl);
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 95882bb..60c9be9 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -46,6 +46,10 @@
This will show detail CPU frequency translation table in sysfs file
system
+# Note that it is not currently possible to set the other governors (such as ondemand)
+# as the default, since if they fail to initialise, cpufreq will be
+# left in an undefined state.
+
choice
prompt "Default CPUFreq governor"
default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110
@@ -115,4 +119,24 @@
If in doubt, say N.
+config CPU_FREQ_GOV_CONSERVATIVE
+ tristate "'conservative' cpufreq governor"
+ depends on CPU_FREQ
+ help
+ 'conservative' - this driver is rather similar to the 'ondemand'
+ governor both in its source code and its purpose, the difference is
+ its optimisation for better suitability in a battery powered
+ environment. The frequency is gracefully increased and decreased
+ rather than jumping to 100% when speed is required.
+
+ If you have a desktop machine then you should really be considering
+ the 'ondemand' governor instead, however if you are using a laptop,
+ PDA or even an AMD64 based computer (due to the unacceptable
+ step-by-step latency issues between the minimum and maximum frequency
+ transitions in the CPU) you will probably want to use this governor.
+
+ For details, take a look at linux/Documentation/cpu-freq.
+
+ If in doubt, say N.
+
endif # CPU_FREQ
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 67b16e5..71fc3b4 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE) += cpufreq_powersave.o
obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o
obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o
+obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
# CPUfreq cross-arch helpers
obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 8e56131..03b5fb2 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -258,7 +258,7 @@
(likely(cpufreq_cpu_data[freqs->cpu]->cur)) &&
(unlikely(freqs->old != cpufreq_cpu_data[freqs->cpu]->cur)))
{
- printk(KERN_WARNING "Warning: CPU frequency is %u, "
+ dprintk(KERN_WARNING "Warning: CPU frequency is %u, "
"cpufreq assumed %u kHz.\n", freqs->old, cpufreq_cpu_data[freqs->cpu]->cur);
freqs->old = cpufreq_cpu_data[freqs->cpu]->cur;
}
@@ -814,7 +814,7 @@
{
struct cpufreq_freqs freqs;
- printk(KERN_WARNING "Warning: CPU frequency out of sync: cpufreq and timing "
+ dprintk(KERN_WARNING "Warning: CPU frequency out of sync: cpufreq and timing "
"core thinks of %u, is %u kHz.\n", old_freq, new_freq);
freqs.cpu = cpu;
@@ -923,7 +923,7 @@
struct cpufreq_freqs freqs;
if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
- printk(KERN_DEBUG "Warning: CPU frequency is %u, "
+ dprintk(KERN_DEBUG "Warning: CPU frequency is %u, "
"cpufreq assumed %u kHz.\n",
cur_freq, cpu_policy->cur);
@@ -1004,7 +1004,7 @@
struct cpufreq_freqs freqs;
if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
- printk(KERN_WARNING "Warning: CPU frequency"
+ dprintk(KERN_WARNING "Warning: CPU frequency"
"is %u, cpufreq assumed %u kHz.\n",
cur_freq, cpu_policy->cur);
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
new file mode 100644
index 0000000..e1df376
--- /dev/null
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -0,0 +1,586 @@
+/*
+ * drivers/cpufreq/cpufreq_conservative.c
+ *
+ * Copyright (C) 2001 Russell King
+ * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ * Jun Nakajima <jun.nakajima@intel.com>
+ * (C) 2004 Alexander Clouter <alex-kernel@digriz.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ctype.h>
+#include <linux/cpufreq.h>
+#include <linux/sysctl.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/sysfs.h>
+#include <linux/sched.h>
+#include <linux/kmod.h>
+#include <linux/workqueue.h>
+#include <linux/jiffies.h>
+#include <linux/kernel_stat.h>
+#include <linux/percpu.h>
+
+/*
+ * dbs is used in this file as a shortform for demandbased switching
+ * It helps to keep variable names smaller, simpler
+ */
+
+#define DEF_FREQUENCY_UP_THRESHOLD (80)
+#define MIN_FREQUENCY_UP_THRESHOLD (0)
+#define MAX_FREQUENCY_UP_THRESHOLD (100)
+
+#define DEF_FREQUENCY_DOWN_THRESHOLD (20)
+#define MIN_FREQUENCY_DOWN_THRESHOLD (0)
+#define MAX_FREQUENCY_DOWN_THRESHOLD (100)
+
+/*
+ * The polling frequency of this governor depends on the capability of
+ * the processor. Default polling frequency is 1000 times the transition
+ * latency of the processor. The governor will work on any processor with
+ * transition latency <= 10mS, using appropriate sampling
+ * rate.
+ * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
+ * this governor will not work.
+ * All times here are in uS.
+ */
+static unsigned int def_sampling_rate;
+#define MIN_SAMPLING_RATE (def_sampling_rate / 2)
+#define MAX_SAMPLING_RATE (500 * def_sampling_rate)
+#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (100000)
+#define DEF_SAMPLING_DOWN_FACTOR (5)
+#define TRANSITION_LATENCY_LIMIT (10 * 1000)
+
+static void do_dbs_timer(void *data);
+
+struct cpu_dbs_info_s {
+ struct cpufreq_policy *cur_policy;
+ unsigned int prev_cpu_idle_up;
+ unsigned int prev_cpu_idle_down;
+ unsigned int enable;
+};
+static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
+
+static unsigned int dbs_enable; /* number of CPUs using this policy */
+
+static DECLARE_MUTEX (dbs_sem);
+static DECLARE_WORK (dbs_work, do_dbs_timer, NULL);
+
+struct dbs_tuners {
+ unsigned int sampling_rate;
+ unsigned int sampling_down_factor;
+ unsigned int up_threshold;
+ unsigned int down_threshold;
+ unsigned int ignore_nice;
+ unsigned int freq_step;
+};
+
+static struct dbs_tuners dbs_tuners_ins = {
+ .up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
+ .down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD,
+ .sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
+};
+
+static inline unsigned int get_cpu_idle_time(unsigned int cpu)
+{
+ return kstat_cpu(cpu).cpustat.idle +
+ kstat_cpu(cpu).cpustat.iowait +
+ ( !dbs_tuners_ins.ignore_nice ?
+ kstat_cpu(cpu).cpustat.nice :
+ 0);
+}
+
+/************************** sysfs interface ************************/
+static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf)
+{
+ return sprintf (buf, "%u\n", MAX_SAMPLING_RATE);
+}
+
+static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf)
+{
+ return sprintf (buf, "%u\n", MIN_SAMPLING_RATE);
+}
+
+#define define_one_ro(_name) \
+static struct freq_attr _name = \
+__ATTR(_name, 0444, show_##_name, NULL)
+
+define_one_ro(sampling_rate_max);
+define_one_ro(sampling_rate_min);
+
+/* cpufreq_conservative Governor Tunables */
+#define show_one(file_name, object) \
+static ssize_t show_##file_name \
+(struct cpufreq_policy *unused, char *buf) \
+{ \
+ return sprintf(buf, "%u\n", dbs_tuners_ins.object); \
+}
+show_one(sampling_rate, sampling_rate);
+show_one(sampling_down_factor, sampling_down_factor);
+show_one(up_threshold, up_threshold);
+show_one(down_threshold, down_threshold);
+show_one(ignore_nice, ignore_nice);
+show_one(freq_step, freq_step);
+
+static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+ ret = sscanf (buf, "%u", &input);
+ if (ret != 1 )
+ return -EINVAL;
+
+ down(&dbs_sem);
+ dbs_tuners_ins.sampling_down_factor = input;
+ up(&dbs_sem);
+
+ return count;
+}
+
+static ssize_t store_sampling_rate(struct cpufreq_policy *unused,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+ ret = sscanf (buf, "%u", &input);
+
+ down(&dbs_sem);
+ if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) {
+ up(&dbs_sem);
+ return -EINVAL;
+ }
+
+ dbs_tuners_ins.sampling_rate = input;
+ up(&dbs_sem);
+
+ return count;
+}
+
+static ssize_t store_up_threshold(struct cpufreq_policy *unused,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+ ret = sscanf (buf, "%u", &input);
+
+ down(&dbs_sem);
+ if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
+ input < MIN_FREQUENCY_UP_THRESHOLD ||
+ input <= dbs_tuners_ins.down_threshold) {
+ up(&dbs_sem);
+ return -EINVAL;
+ }
+
+ dbs_tuners_ins.up_threshold = input;
+ up(&dbs_sem);
+
+ return count;
+}
+
+static ssize_t store_down_threshold(struct cpufreq_policy *unused,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+ ret = sscanf (buf, "%u", &input);
+
+ down(&dbs_sem);
+ if (ret != 1 || input > MAX_FREQUENCY_DOWN_THRESHOLD ||
+ input < MIN_FREQUENCY_DOWN_THRESHOLD ||
+ input >= dbs_tuners_ins.up_threshold) {
+ up(&dbs_sem);
+ return -EINVAL;
+ }
+
+ dbs_tuners_ins.down_threshold = input;
+ up(&dbs_sem);
+
+ return count;
+}
+
+static ssize_t store_ignore_nice(struct cpufreq_policy *policy,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+
+ unsigned int j;
+
+ ret = sscanf (buf, "%u", &input);
+ if ( ret != 1 )
+ return -EINVAL;
+
+ if ( input > 1 )
+ input = 1;
+
+ down(&dbs_sem);
+ if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */
+ up(&dbs_sem);
+ return count;
+ }
+ dbs_tuners_ins.ignore_nice = input;
+
+ /* we need to re-evaluate prev_cpu_idle_up and prev_cpu_idle_down */
+ for_each_online_cpu(j) {
+ struct cpu_dbs_info_s *j_dbs_info;
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j);
+ j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up;
+ }
+ up(&dbs_sem);
+
+ return count;
+}
+
+static ssize_t store_freq_step(struct cpufreq_policy *policy,
+ const char *buf, size_t count)
+{
+ unsigned int input;
+ int ret;
+
+ ret = sscanf (buf, "%u", &input);
+
+ if ( ret != 1 )
+ return -EINVAL;
+
+ if ( input > 100 )
+ input = 100;
+
+ /* no need to test here if freq_step is zero as the user might actually
+ * want this, they would be crazy though :) */
+ down(&dbs_sem);
+ dbs_tuners_ins.freq_step = input;
+ up(&dbs_sem);
+
+ return count;
+}
+
+#define define_one_rw(_name) \
+static struct freq_attr _name = \
+__ATTR(_name, 0644, show_##_name, store_##_name)
+
+define_one_rw(sampling_rate);
+define_one_rw(sampling_down_factor);
+define_one_rw(up_threshold);
+define_one_rw(down_threshold);
+define_one_rw(ignore_nice);
+define_one_rw(freq_step);
+
+static struct attribute * dbs_attributes[] = {
+ &sampling_rate_max.attr,
+ &sampling_rate_min.attr,
+ &sampling_rate.attr,
+ &sampling_down_factor.attr,
+ &up_threshold.attr,
+ &down_threshold.attr,
+ &ignore_nice.attr,
+ &freq_step.attr,
+ NULL
+};
+
+static struct attribute_group dbs_attr_group = {
+ .attrs = dbs_attributes,
+ .name = "conservative",
+};
+
+/************************** sysfs end ************************/
+
+static void dbs_check_cpu(int cpu)
+{
+ unsigned int idle_ticks, up_idle_ticks, down_idle_ticks;
+ unsigned int freq_step;
+ unsigned int freq_down_sampling_rate;
+ static int down_skip[NR_CPUS];
+ static int requested_freq[NR_CPUS];
+ static unsigned short init_flag = 0;
+ struct cpu_dbs_info_s *this_dbs_info;
+ struct cpu_dbs_info_s *dbs_info;
+
+ struct cpufreq_policy *policy;
+ unsigned int j;
+
+ this_dbs_info = &per_cpu(cpu_dbs_info, cpu);
+ if (!this_dbs_info->enable)
+ return;
+
+ policy = this_dbs_info->cur_policy;
+
+ if ( init_flag == 0 ) {
+ for ( /* NULL */; init_flag < NR_CPUS; init_flag++ ) {
+ dbs_info = &per_cpu(cpu_dbs_info, init_flag);
+ requested_freq[cpu] = dbs_info->cur_policy->cur;
+ }
+ init_flag = 1;
+ }
+
+ /*
+ * The default safe range is 20% to 80%
+ * Every sampling_rate, we check
+ * - If current idle time is less than 20%, then we try to
+ * increase frequency
+ * Every sampling_rate*sampling_down_factor, we check
+ * - If current idle time is more than 80%, then we try to
+ * decrease frequency
+ *
+ * Any frequency increase takes it to the maximum frequency.
+ * Frequency reduction happens at minimum steps of
+ * 5% (default) of max_frequency
+ */
+
+ /* Check for frequency increase */
+
+ idle_ticks = UINT_MAX;
+ for_each_cpu_mask(j, policy->cpus) {
+ unsigned int tmp_idle_ticks, total_idle_ticks;
+ struct cpu_dbs_info_s *j_dbs_info;
+
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ /* Check for frequency increase */
+ total_idle_ticks = get_cpu_idle_time(j);
+ tmp_idle_ticks = total_idle_ticks -
+ j_dbs_info->prev_cpu_idle_up;
+ j_dbs_info->prev_cpu_idle_up = total_idle_ticks;
+
+ if (tmp_idle_ticks < idle_ticks)
+ idle_ticks = tmp_idle_ticks;
+ }
+
+ /* Scale idle ticks by 100 and compare with up and down ticks */
+ idle_ticks *= 100;
+ up_idle_ticks = (100 - dbs_tuners_ins.up_threshold) *
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
+
+ if (idle_ticks < up_idle_ticks) {
+ down_skip[cpu] = 0;
+ for_each_cpu_mask(j, policy->cpus) {
+ struct cpu_dbs_info_s *j_dbs_info;
+
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ j_dbs_info->prev_cpu_idle_down =
+ j_dbs_info->prev_cpu_idle_up;
+ }
+ /* if we are already at full speed then break out early */
+ if (requested_freq[cpu] == policy->max)
+ return;
+
+ freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100;
+
+ /* max freq cannot be less than 100. But who knows.... */
+ if (unlikely(freq_step == 0))
+ freq_step = 5;
+
+ requested_freq[cpu] += freq_step;
+ if (requested_freq[cpu] > policy->max)
+ requested_freq[cpu] = policy->max;
+
+ __cpufreq_driver_target(policy, requested_freq[cpu],
+ CPUFREQ_RELATION_H);
+ return;
+ }
+
+ /* Check for frequency decrease */
+ down_skip[cpu]++;
+ if (down_skip[cpu] < dbs_tuners_ins.sampling_down_factor)
+ return;
+
+ idle_ticks = UINT_MAX;
+ for_each_cpu_mask(j, policy->cpus) {
+ unsigned int tmp_idle_ticks, total_idle_ticks;
+ struct cpu_dbs_info_s *j_dbs_info;
+
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ total_idle_ticks = j_dbs_info->prev_cpu_idle_up;
+ tmp_idle_ticks = total_idle_ticks -
+ j_dbs_info->prev_cpu_idle_down;
+ j_dbs_info->prev_cpu_idle_down = total_idle_ticks;
+
+ if (tmp_idle_ticks < idle_ticks)
+ idle_ticks = tmp_idle_ticks;
+ }
+
+ /* Scale idle ticks by 100 and compare with up and down ticks */
+ idle_ticks *= 100;
+ down_skip[cpu] = 0;
+
+ freq_down_sampling_rate = dbs_tuners_ins.sampling_rate *
+ dbs_tuners_ins.sampling_down_factor;
+ down_idle_ticks = (100 - dbs_tuners_ins.down_threshold) *
+ usecs_to_jiffies(freq_down_sampling_rate);
+
+ if (idle_ticks > down_idle_ticks) {
+ /* if we are already at the lowest speed then break out early
+ * or if we 'cannot' reduce the speed as the user might want
+ * freq_step to be zero */
+ if (requested_freq[cpu] == policy->min
+ || dbs_tuners_ins.freq_step == 0)
+ return;
+
+ freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100;
+
+ /* max freq cannot be less than 100. But who knows.... */
+ if (unlikely(freq_step == 0))
+ freq_step = 5;
+
+ requested_freq[cpu] -= freq_step;
+ if (requested_freq[cpu] < policy->min)
+ requested_freq[cpu] = policy->min;
+
+ __cpufreq_driver_target(policy,
+ requested_freq[cpu],
+ CPUFREQ_RELATION_H);
+ return;
+ }
+}
+
+static void do_dbs_timer(void *data)
+{
+ int i;
+ down(&dbs_sem);
+ for_each_online_cpu(i)
+ dbs_check_cpu(i);
+ schedule_delayed_work(&dbs_work,
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
+ up(&dbs_sem);
+}
+
+static inline void dbs_timer_init(void)
+{
+ INIT_WORK(&dbs_work, do_dbs_timer, NULL);
+ schedule_delayed_work(&dbs_work,
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
+ return;
+}
+
+static inline void dbs_timer_exit(void)
+{
+ cancel_delayed_work(&dbs_work);
+ return;
+}
+
+static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
+ unsigned int event)
+{
+ unsigned int cpu = policy->cpu;
+ struct cpu_dbs_info_s *this_dbs_info;
+ unsigned int j;
+
+ this_dbs_info = &per_cpu(cpu_dbs_info, cpu);
+
+ switch (event) {
+ case CPUFREQ_GOV_START:
+ if ((!cpu_online(cpu)) ||
+ (!policy->cur))
+ return -EINVAL;
+
+ if (policy->cpuinfo.transition_latency >
+ (TRANSITION_LATENCY_LIMIT * 1000))
+ return -EINVAL;
+ if (this_dbs_info->enable) /* Already enabled */
+ break;
+
+ down(&dbs_sem);
+ for_each_cpu_mask(j, policy->cpus) {
+ struct cpu_dbs_info_s *j_dbs_info;
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ j_dbs_info->cur_policy = policy;
+
+ j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j);
+ j_dbs_info->prev_cpu_idle_down
+ = j_dbs_info->prev_cpu_idle_up;
+ }
+ this_dbs_info->enable = 1;
+ sysfs_create_group(&policy->kobj, &dbs_attr_group);
+ dbs_enable++;
+ /*
+ * Start the timerschedule work, when this governor
+ * is used for first time
+ */
+ if (dbs_enable == 1) {
+ unsigned int latency;
+ /* policy latency is in nS. Convert it to uS first */
+
+ latency = policy->cpuinfo.transition_latency;
+ if (latency < 1000)
+ latency = 1000;
+
+ def_sampling_rate = (latency / 1000) *
+ DEF_SAMPLING_RATE_LATENCY_MULTIPLIER;
+ dbs_tuners_ins.sampling_rate = def_sampling_rate;
+ dbs_tuners_ins.ignore_nice = 0;
+ dbs_tuners_ins.freq_step = 5;
+
+ dbs_timer_init();
+ }
+
+ up(&dbs_sem);
+ break;
+
+ case CPUFREQ_GOV_STOP:
+ down(&dbs_sem);
+ this_dbs_info->enable = 0;
+ sysfs_remove_group(&policy->kobj, &dbs_attr_group);
+ dbs_enable--;
+ /*
+ * Stop the timerschedule work, when this governor
+ * is used for first time
+ */
+ if (dbs_enable == 0)
+ dbs_timer_exit();
+
+ up(&dbs_sem);
+
+ break;
+
+ case CPUFREQ_GOV_LIMITS:
+ down(&dbs_sem);
+ if (policy->max < this_dbs_info->cur_policy->cur)
+ __cpufreq_driver_target(
+ this_dbs_info->cur_policy,
+ policy->max, CPUFREQ_RELATION_H);
+ else if (policy->min > this_dbs_info->cur_policy->cur)
+ __cpufreq_driver_target(
+ this_dbs_info->cur_policy,
+ policy->min, CPUFREQ_RELATION_L);
+ up(&dbs_sem);
+ break;
+ }
+ return 0;
+}
+
+static struct cpufreq_governor cpufreq_gov_dbs = {
+ .name = "conservative",
+ .governor = cpufreq_governor_dbs,
+ .owner = THIS_MODULE,
+};
+
+static int __init cpufreq_gov_dbs_init(void)
+{
+ return cpufreq_register_governor(&cpufreq_gov_dbs);
+}
+
+static void __exit cpufreq_gov_dbs_exit(void)
+{
+ /* Make sure that the scheduled work is indeed not running */
+ flush_scheduled_work();
+
+ cpufreq_unregister_governor(&cpufreq_gov_dbs);
+}
+
+
+MODULE_AUTHOR ("Alexander Clouter <alex-kernel@digriz.org.uk>");
+MODULE_DESCRIPTION ("'cpufreq_conservative' - A dynamic cpufreq governor for "
+ "Low Latency Frequency Transition capable processors "
+ "optimised for use in a battery environment");
+MODULE_LICENSE ("GPL");
+
+module_init(cpufreq_gov_dbs_init);
+module_exit(cpufreq_gov_dbs_exit);
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 8d83a21..c1fc9c6 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -34,13 +34,9 @@
*/
#define DEF_FREQUENCY_UP_THRESHOLD (80)
-#define MIN_FREQUENCY_UP_THRESHOLD (0)
+#define MIN_FREQUENCY_UP_THRESHOLD (11)
#define MAX_FREQUENCY_UP_THRESHOLD (100)
-#define DEF_FREQUENCY_DOWN_THRESHOLD (20)
-#define MIN_FREQUENCY_DOWN_THRESHOLD (0)
-#define MAX_FREQUENCY_DOWN_THRESHOLD (100)
-
/*
* The polling frequency of this governor depends on the capability of
* the processor. Default polling frequency is 1000 times the transition
@@ -55,9 +51,9 @@
#define MIN_SAMPLING_RATE (def_sampling_rate / 2)
#define MAX_SAMPLING_RATE (500 * def_sampling_rate)
#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (1000)
-#define DEF_SAMPLING_DOWN_FACTOR (10)
+#define DEF_SAMPLING_DOWN_FACTOR (1)
+#define MAX_SAMPLING_DOWN_FACTOR (10)
#define TRANSITION_LATENCY_LIMIT (10 * 1000)
-#define sampling_rate_in_HZ(x) (((x * HZ) < (1000 * 1000))?1:((x * HZ) / (1000 * 1000)))
static void do_dbs_timer(void *data);
@@ -78,15 +74,23 @@
unsigned int sampling_rate;
unsigned int sampling_down_factor;
unsigned int up_threshold;
- unsigned int down_threshold;
+ unsigned int ignore_nice;
};
static struct dbs_tuners dbs_tuners_ins = {
.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
- .down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD,
.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
};
+static inline unsigned int get_cpu_idle_time(unsigned int cpu)
+{
+ return kstat_cpu(cpu).cpustat.idle +
+ kstat_cpu(cpu).cpustat.iowait +
+ ( !dbs_tuners_ins.ignore_nice ?
+ kstat_cpu(cpu).cpustat.nice :
+ 0);
+}
+
/************************** sysfs interface ************************/
static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf)
{
@@ -115,7 +119,7 @@
show_one(sampling_rate, sampling_rate);
show_one(sampling_down_factor, sampling_down_factor);
show_one(up_threshold, up_threshold);
-show_one(down_threshold, down_threshold);
+show_one(ignore_nice, ignore_nice);
static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused,
const char *buf, size_t count)
@@ -126,6 +130,9 @@
if (ret != 1 )
return -EINVAL;
+ if (input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
+ return -EINVAL;
+
down(&dbs_sem);
dbs_tuners_ins.sampling_down_factor = input;
up(&dbs_sem);
@@ -161,8 +168,7 @@
down(&dbs_sem);
if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
- input < MIN_FREQUENCY_UP_THRESHOLD ||
- input <= dbs_tuners_ins.down_threshold) {
+ input < MIN_FREQUENCY_UP_THRESHOLD) {
up(&dbs_sem);
return -EINVAL;
}
@@ -173,22 +179,35 @@
return count;
}
-static ssize_t store_down_threshold(struct cpufreq_policy *unused,
+static ssize_t store_ignore_nice(struct cpufreq_policy *policy,
const char *buf, size_t count)
{
unsigned int input;
int ret;
+
+ unsigned int j;
+
ret = sscanf (buf, "%u", &input);
-
- down(&dbs_sem);
- if (ret != 1 || input > MAX_FREQUENCY_DOWN_THRESHOLD ||
- input < MIN_FREQUENCY_DOWN_THRESHOLD ||
- input >= dbs_tuners_ins.up_threshold) {
- up(&dbs_sem);
+ if ( ret != 1 )
return -EINVAL;
- }
- dbs_tuners_ins.down_threshold = input;
+ if ( input > 1 )
+ input = 1;
+
+ down(&dbs_sem);
+ if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */
+ up(&dbs_sem);
+ return count;
+ }
+ dbs_tuners_ins.ignore_nice = input;
+
+ /* we need to re-evaluate prev_cpu_idle_up and prev_cpu_idle_down */
+ for_each_online_cpu(j) {
+ struct cpu_dbs_info_s *j_dbs_info;
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j);
+ j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up;
+ }
up(&dbs_sem);
return count;
@@ -201,7 +220,7 @@
define_one_rw(sampling_rate);
define_one_rw(sampling_down_factor);
define_one_rw(up_threshold);
-define_one_rw(down_threshold);
+define_one_rw(ignore_nice);
static struct attribute * dbs_attributes[] = {
&sampling_rate_max.attr,
@@ -209,7 +228,7 @@
&sampling_rate.attr,
&sampling_down_factor.attr,
&up_threshold.attr,
- &down_threshold.attr,
+ &ignore_nice.attr,
NULL
};
@@ -222,9 +241,8 @@
static void dbs_check_cpu(int cpu)
{
- unsigned int idle_ticks, up_idle_ticks, down_idle_ticks;
- unsigned int total_idle_ticks;
- unsigned int freq_down_step;
+ unsigned int idle_ticks, up_idle_ticks, total_ticks;
+ unsigned int freq_next;
unsigned int freq_down_sampling_rate;
static int down_skip[NR_CPUS];
struct cpu_dbs_info_s *this_dbs_info;
@@ -238,38 +256,25 @@
policy = this_dbs_info->cur_policy;
/*
- * The default safe range is 20% to 80%
- * Every sampling_rate, we check
- * - If current idle time is less than 20%, then we try to
- * increase frequency
- * Every sampling_rate*sampling_down_factor, we check
- * - If current idle time is more than 80%, then we try to
- * decrease frequency
+ * Every sampling_rate, we check, if current idle time is less
+ * than 20% (default), then we try to increase frequency
+ * Every sampling_rate*sampling_down_factor, we look for a the lowest
+ * frequency which can sustain the load while keeping idle time over
+ * 30%. If such a frequency exist, we try to decrease to this frequency.
*
* Any frequency increase takes it to the maximum frequency.
* Frequency reduction happens at minimum steps of
- * 5% of max_frequency
+ * 5% (default) of current frequency
*/
/* Check for frequency increase */
- total_idle_ticks = kstat_cpu(cpu).cpustat.idle +
- kstat_cpu(cpu).cpustat.iowait;
- idle_ticks = total_idle_ticks -
- this_dbs_info->prev_cpu_idle_up;
- this_dbs_info->prev_cpu_idle_up = total_idle_ticks;
-
-
+ idle_ticks = UINT_MAX;
for_each_cpu_mask(j, policy->cpus) {
- unsigned int tmp_idle_ticks;
+ unsigned int tmp_idle_ticks, total_idle_ticks;
struct cpu_dbs_info_s *j_dbs_info;
- if (j == cpu)
- continue;
-
j_dbs_info = &per_cpu(cpu_dbs_info, j);
- /* Check for frequency increase */
- total_idle_ticks = kstat_cpu(j).cpustat.idle +
- kstat_cpu(j).cpustat.iowait;
+ total_idle_ticks = get_cpu_idle_time(j);
tmp_idle_ticks = total_idle_ticks -
j_dbs_info->prev_cpu_idle_up;
j_dbs_info->prev_cpu_idle_up = total_idle_ticks;
@@ -281,13 +286,23 @@
/* Scale idle ticks by 100 and compare with up and down ticks */
idle_ticks *= 100;
up_idle_ticks = (100 - dbs_tuners_ins.up_threshold) *
- sampling_rate_in_HZ(dbs_tuners_ins.sampling_rate);
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
if (idle_ticks < up_idle_ticks) {
+ down_skip[cpu] = 0;
+ for_each_cpu_mask(j, policy->cpus) {
+ struct cpu_dbs_info_s *j_dbs_info;
+
+ j_dbs_info = &per_cpu(cpu_dbs_info, j);
+ j_dbs_info->prev_cpu_idle_down =
+ j_dbs_info->prev_cpu_idle_up;
+ }
+ /* if we are already at full speed then break out early */
+ if (policy->cur == policy->max)
+ return;
+
__cpufreq_driver_target(policy, policy->max,
CPUFREQ_RELATION_H);
- down_skip[cpu] = 0;
- this_dbs_info->prev_cpu_idle_down = total_idle_ticks;
return;
}
@@ -296,23 +311,14 @@
if (down_skip[cpu] < dbs_tuners_ins.sampling_down_factor)
return;
- total_idle_ticks = kstat_cpu(cpu).cpustat.idle +
- kstat_cpu(cpu).cpustat.iowait;
- idle_ticks = total_idle_ticks -
- this_dbs_info->prev_cpu_idle_down;
- this_dbs_info->prev_cpu_idle_down = total_idle_ticks;
-
+ idle_ticks = UINT_MAX;
for_each_cpu_mask(j, policy->cpus) {
- unsigned int tmp_idle_ticks;
+ unsigned int tmp_idle_ticks, total_idle_ticks;
struct cpu_dbs_info_s *j_dbs_info;
- if (j == cpu)
- continue;
-
j_dbs_info = &per_cpu(cpu_dbs_info, j);
- /* Check for frequency increase */
- total_idle_ticks = kstat_cpu(j).cpustat.idle +
- kstat_cpu(j).cpustat.iowait;
+ /* Check for frequency decrease */
+ total_idle_ticks = j_dbs_info->prev_cpu_idle_up;
tmp_idle_ticks = total_idle_ticks -
j_dbs_info->prev_cpu_idle_down;
j_dbs_info->prev_cpu_idle_down = total_idle_ticks;
@@ -321,38 +327,37 @@
idle_ticks = tmp_idle_ticks;
}
- /* Scale idle ticks by 100 and compare with up and down ticks */
- idle_ticks *= 100;
down_skip[cpu] = 0;
+ /* if we cannot reduce the frequency anymore, break out early */
+ if (policy->cur == policy->min)
+ return;
+ /* Compute how many ticks there are between two measurements */
freq_down_sampling_rate = dbs_tuners_ins.sampling_rate *
dbs_tuners_ins.sampling_down_factor;
- down_idle_ticks = (100 - dbs_tuners_ins.down_threshold) *
- sampling_rate_in_HZ(freq_down_sampling_rate);
+ total_ticks = usecs_to_jiffies(freq_down_sampling_rate);
- if (idle_ticks > down_idle_ticks ) {
- freq_down_step = (5 * policy->max) / 100;
+ /*
+ * The optimal frequency is the frequency that is the lowest that
+ * can support the current CPU usage without triggering the up
+ * policy. To be safe, we focus 10 points under the threshold.
+ */
+ freq_next = ((total_ticks - idle_ticks) * 100) / total_ticks;
+ freq_next = (freq_next * policy->cur) /
+ (dbs_tuners_ins.up_threshold - 10);
- /* max freq cannot be less than 100. But who knows.... */
- if (unlikely(freq_down_step == 0))
- freq_down_step = 5;
-
- __cpufreq_driver_target(policy,
- policy->cur - freq_down_step,
- CPUFREQ_RELATION_H);
- return;
- }
+ if (freq_next <= ((policy->cur * 95) / 100))
+ __cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_L);
}
static void do_dbs_timer(void *data)
{
int i;
down(&dbs_sem);
- for (i = 0; i < NR_CPUS; i++)
- if (cpu_online(i))
- dbs_check_cpu(i);
+ for_each_online_cpu(i)
+ dbs_check_cpu(i);
schedule_delayed_work(&dbs_work,
- sampling_rate_in_HZ(dbs_tuners_ins.sampling_rate));
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
up(&dbs_sem);
}
@@ -360,7 +365,7 @@
{
INIT_WORK(&dbs_work, do_dbs_timer, NULL);
schedule_delayed_work(&dbs_work,
- sampling_rate_in_HZ(dbs_tuners_ins.sampling_rate));
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
return;
}
@@ -397,12 +402,9 @@
j_dbs_info = &per_cpu(cpu_dbs_info, j);
j_dbs_info->cur_policy = policy;
- j_dbs_info->prev_cpu_idle_up =
- kstat_cpu(j).cpustat.idle +
- kstat_cpu(j).cpustat.iowait;
- j_dbs_info->prev_cpu_idle_down =
- kstat_cpu(j).cpustat.idle +
- kstat_cpu(j).cpustat.iowait;
+ j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j);
+ j_dbs_info->prev_cpu_idle_down
+ = j_dbs_info->prev_cpu_idle_up;
}
this_dbs_info->enable = 1;
sysfs_create_group(&policy->kobj, &dbs_attr_group);
@@ -422,6 +424,7 @@
def_sampling_rate = (latency / 1000) *
DEF_SAMPLING_RATE_LATENCY_MULTIPLIER;
dbs_tuners_ins.sampling_rate = def_sampling_rate;
+ dbs_tuners_ins.ignore_nice = 0;
dbs_timer_init();
}
@@ -461,12 +464,11 @@
return 0;
}
-struct cpufreq_governor cpufreq_gov_dbs = {
+static struct cpufreq_governor cpufreq_gov_dbs = {
.name = "ondemand",
.governor = cpufreq_governor_dbs,
.owner = THIS_MODULE,
};
-EXPORT_SYMBOL(cpufreq_gov_dbs);
static int __init cpufreq_gov_dbs_init(void)
{
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index 2084593..741b6b1 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -19,6 +19,7 @@
#include <linux/percpu.h>
#include <linux/kobject.h>
#include <linux/spinlock.h>
+#include <asm/cputime.h>
static spinlock_t cpufreq_stats_lock;
@@ -29,20 +30,14 @@
.show = _show,\
};
-static unsigned long
-delta_time(unsigned long old, unsigned long new)
-{
- return (old > new) ? (old - new): (new + ~old + 1);
-}
-
struct cpufreq_stats {
unsigned int cpu;
unsigned int total_trans;
- unsigned long long last_time;
+ unsigned long long last_time;
unsigned int max_state;
unsigned int state_num;
unsigned int last_index;
- unsigned long long *time_in_state;
+ cputime64_t *time_in_state;
unsigned int *freq_table;
#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
unsigned int *trans_table;
@@ -60,12 +55,16 @@
cpufreq_stats_update (unsigned int cpu)
{
struct cpufreq_stats *stat;
+ unsigned long long cur_time;
+
+ cur_time = get_jiffies_64();
spin_lock(&cpufreq_stats_lock);
stat = cpufreq_stats_table[cpu];
if (stat->time_in_state)
- stat->time_in_state[stat->last_index] +=
- delta_time(stat->last_time, jiffies);
- stat->last_time = jiffies;
+ stat->time_in_state[stat->last_index] =
+ cputime64_add(stat->time_in_state[stat->last_index],
+ cputime_sub(cur_time, stat->last_time));
+ stat->last_time = cur_time;
spin_unlock(&cpufreq_stats_lock);
return 0;
}
@@ -90,8 +89,8 @@
return 0;
cpufreq_stats_update(stat->cpu);
for (i = 0; i < stat->state_num; i++) {
- len += sprintf(buf + len, "%u %llu\n",
- stat->freq_table[i], stat->time_in_state[i]);
+ len += sprintf(buf + len, "%u %llu\n", stat->freq_table[i],
+ (unsigned long long)cputime64_to_clock_t(stat->time_in_state[i]));
}
return len;
}
@@ -107,16 +106,30 @@
if(!stat)
return 0;
cpufreq_stats_update(stat->cpu);
+ len += snprintf(buf + len, PAGE_SIZE - len, " From : To\n");
+ len += snprintf(buf + len, PAGE_SIZE - len, " : ");
for (i = 0; i < stat->state_num; i++) {
if (len >= PAGE_SIZE)
break;
- len += snprintf(buf + len, PAGE_SIZE - len, "%9u:\t",
+ len += snprintf(buf + len, PAGE_SIZE - len, "%9u ",
+ stat->freq_table[i]);
+ }
+ if (len >= PAGE_SIZE)
+ return len;
+
+ len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+
+ for (i = 0; i < stat->state_num; i++) {
+ if (len >= PAGE_SIZE)
+ break;
+
+ len += snprintf(buf + len, PAGE_SIZE - len, "%9u: ",
stat->freq_table[i]);
for (j = 0; j < stat->state_num; j++) {
if (len >= PAGE_SIZE)
break;
- len += snprintf(buf + len, PAGE_SIZE - len, "%u\t",
+ len += snprintf(buf + len, PAGE_SIZE - len, "%9u ",
stat->trans_table[i*stat->max_state+j]);
}
len += snprintf(buf + len, PAGE_SIZE - len, "\n");
@@ -197,7 +210,7 @@
count++;
}
- alloc_size = count * sizeof(int) + count * sizeof(long long);
+ alloc_size = count * sizeof(int) + count * sizeof(cputime64_t);
#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
alloc_size += count * count * sizeof(int);
@@ -224,7 +237,7 @@
}
stat->state_num = j;
spin_lock(&cpufreq_stats_lock);
- stat->last_time = jiffies;
+ stat->last_time = get_jiffies_64();
stat->last_index = freq_table_get_index(stat, policy->cur);
spin_unlock(&cpufreq_stats_lock);
cpufreq_cpu_put(data);
diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c
index 6d5df6c..df1b721 100644
--- a/drivers/firmware/pcdp.c
+++ b/drivers/firmware/pcdp.c
@@ -11,6 +11,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/config.h>
#include <linux/acpi.h>
#include <linux/console.h>
#include <linux/efi.h>
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 3571081..fdd881a 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -2,6 +2,7 @@
* i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
*
* Copyright (C) 2004 Patrick Mochel
+ * 2005 Rudolf Marek <r.marek@sh.cvut.cz>
*
* The 1563 southbridge is deceptively similar to the 1533, with a
* few notable exceptions. One of those happens to be the fact they
@@ -57,10 +58,11 @@
#define HST_CNTL2_BLOCK 0x05
+#define HST_CNTL2_SIZEMASK 0x38
static unsigned short ali1563_smba;
-static int ali1563_transaction(struct i2c_adapter * a)
+static int ali1563_transaction(struct i2c_adapter * a, int size)
{
u32 data;
int timeout;
@@ -73,7 +75,7 @@
data = inb_p(SMB_HST_STS);
if (data & HST_STS_BAD) {
- dev_warn(&a->dev,"ali1563: Trying to reset busy device\n");
+ dev_err(&a->dev, "ali1563: Trying to reset busy device\n");
outb_p(data | HST_STS_BAD,SMB_HST_STS);
data = inb_p(SMB_HST_STS);
if (data & HST_STS_BAD)
@@ -94,19 +96,31 @@
if (timeout && !(data & HST_STS_BAD))
return 0;
- dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n",
- timeout ? "Timeout " : "",
- data & HST_STS_FAIL ? "Transaction Failed " : "",
- data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
- data & HST_STS_DEVERR ? "Device Error " : "",
- !(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
- if (!(data & HST_STS_DONE))
+ if (!timeout) {
+ dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n");
/* Issue 'kill' to host controller */
outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2);
- else
- /* Issue timeout to reset all devices on bus */
+ data = inb_p(SMB_HST_STS);
+ }
+
+ /* device error - no response, ignore the autodetection case */
+ if ((data & HST_STS_DEVERR) && (size != HST_CNTL2_QUICK)) {
+ dev_err(&a->dev, "Device error!\n");
+ }
+
+ /* bus collision */
+ if (data & HST_STS_BUSERR) {
+ dev_err(&a->dev, "Bus collision!\n");
+ /* Issue timeout, hoping it helps */
outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1);
+ }
+
+ if (data & HST_STS_FAIL) {
+ dev_err(&a->dev, "Cleaning fail after KILL!\n");
+ outb_p(0x0,SMB_HST_CNTL2);
+ }
+
return -1;
}
@@ -149,7 +163,7 @@
if (timeout && !(data & HST_STS_BAD))
return 0;
- dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n",
+ dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n",
timeout ? "Timeout " : "",
data & HST_STS_FAIL ? "Transaction Failed " : "",
data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
@@ -242,13 +256,15 @@
}
outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
- outb_p(inb_p(SMB_HST_CNTL2) | (size << 3), SMB_HST_CNTL2);
+ outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | (size << 3), SMB_HST_CNTL2);
/* Write the command register */
+
switch(size) {
case HST_CNTL2_BYTE:
if (rw== I2C_SMBUS_WRITE)
- outb_p(cmd, SMB_HST_CMD);
+ /* Beware it uses DAT0 register and not CMD! */
+ outb_p(cmd, SMB_HST_DAT0);
break;
case HST_CNTL2_BYTE_DATA:
outb_p(cmd, SMB_HST_CMD);
@@ -268,7 +284,7 @@
goto Done;
}
- if ((error = ali1563_transaction(a)))
+ if ((error = ali1563_transaction(a, size)))
goto Done;
if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))
diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c
index dd0d4c4..867d443 100644
--- a/drivers/i2c/busses/i2c-keywest.c
+++ b/drivers/i2c/busses/i2c-keywest.c
@@ -516,6 +516,11 @@
u32 *psteps, *prate;
int rc;
+ if (np->n_intrs < 1 || np->n_addrs < 1) {
+ printk(KERN_ERR "%s: Missing interrupt or address !\n",
+ np->full_name);
+ return -ENODEV;
+ }
if (pmac_low_i2c_lock(np))
return -ENODEV;
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 33a020f..39f3e91 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1932,8 +1932,11 @@
/*
* check if dma is safe
+ *
+ * NOTE! The "len" and "addr" checks should possibly have
+ * separate masks.
*/
- if ((rq->data_len & mask) || (addr & mask))
+ if ((rq->data_len & 15) || (addr & mask))
info->dma = 0;
}
@@ -3255,16 +3258,12 @@
return capacity * sectors_per_frame;
}
-static
-int ide_cdrom_cleanup(ide_drive_t *drive)
+static int ide_cd_remove(struct device *dev)
{
+ ide_drive_t *drive = to_ide_device(dev);
struct cdrom_info *info = drive->driver_data;
- if (ide_unregister_subdriver(drive)) {
- printk(KERN_ERR "%s: %s: failed to ide_unregister_subdriver\n",
- __FUNCTION__, drive->name);
- return 1;
- }
+ ide_unregister_subdriver(drive, info->driver);
del_gendisk(info->disk);
@@ -3297,7 +3296,7 @@
kfree(info);
}
-static int ide_cdrom_attach (ide_drive_t *drive);
+static int ide_cd_probe(struct device *);
#ifdef CONFIG_PROC_FS
static int proc_idecd_read_capacity
@@ -3320,19 +3319,20 @@
static ide_driver_t ide_cdrom_driver = {
.owner = THIS_MODULE,
- .name = "ide-cdrom",
+ .gen_driver = {
+ .name = "ide-cdrom",
+ .bus = &ide_bus_type,
+ .probe = ide_cd_probe,
+ .remove = ide_cd_remove,
+ },
.version = IDECD_VERSION,
.media = ide_cdrom,
- .busy = 0,
.supports_dsc_overlap = 1,
- .cleanup = ide_cdrom_cleanup,
.do_request = ide_do_rw_cdrom,
.end_request = ide_end_request,
.error = __ide_error,
.abort = __ide_abort,
.proc = idecd_proc,
- .attach = ide_cdrom_attach,
- .drives = LIST_HEAD_INIT(ide_cdrom_driver.drives),
};
static int idecd_open(struct inode * inode, struct file * file)
@@ -3418,8 +3418,9 @@
module_param(ignore, charp, 0400);
MODULE_DESCRIPTION("ATAPI CD-ROM Driver");
-static int ide_cdrom_attach (ide_drive_t *drive)
+static int ide_cd_probe(struct device *dev)
{
+ ide_drive_t *drive = to_ide_device(dev);
struct cdrom_info *info;
struct gendisk *g;
struct request_sense sense;
@@ -3453,11 +3454,8 @@
ide_init_disk(g, drive);
- if (ide_register_subdriver(drive, &ide_cdrom_driver)) {
- printk(KERN_ERR "%s: Failed to register the driver with ide.c\n",
- drive->name);
- goto out_put_disk;
- }
+ ide_register_subdriver(drive, &ide_cdrom_driver);
+
memset(info, 0, sizeof (struct cdrom_info));
kref_init(&info->kref);
@@ -3470,7 +3468,6 @@
drive->driver_data = info;
- DRIVER(drive)->busy++;
g->minors = 1;
snprintf(g->devfs_name, sizeof(g->devfs_name),
"%s/cd", drive->devfs_name);
@@ -3478,8 +3475,7 @@
g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
if (ide_cdrom_setup(drive)) {
struct cdrom_device_info *devinfo = &info->devinfo;
- DRIVER(drive)->busy--;
- ide_unregister_subdriver(drive);
+ ide_unregister_subdriver(drive, &ide_cdrom_driver);
if (info->buffer != NULL)
kfree(info->buffer);
if (info->toc != NULL)
@@ -3492,7 +3488,6 @@
drive->driver_data = NULL;
goto failed;
}
- DRIVER(drive)->busy--;
cdrom_read_toc(drive, &sense);
g->fops = &idecd_ops;
@@ -3500,23 +3495,20 @@
add_disk(g);
return 0;
-out_put_disk:
- put_disk(g);
out_free_cd:
kfree(info);
failed:
- return 1;
+ return -ENODEV;
}
static void __exit ide_cdrom_exit(void)
{
- ide_unregister_driver(&ide_cdrom_driver);
+ driver_unregister(&ide_cdrom_driver.gen_driver);
}
static int ide_cdrom_init(void)
{
- ide_register_driver(&ide_cdrom_driver);
- return 0;
+ return driver_register(&ide_cdrom_driver.gen_driver);
}
module_init(ide_cdrom_init);
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 5d54f77..3302cd8 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -1024,14 +1024,16 @@
printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
}
-static int idedisk_cleanup (ide_drive_t *drive)
+static int ide_disk_remove(struct device *dev)
{
+ ide_drive_t *drive = to_ide_device(dev);
struct ide_disk_obj *idkp = drive->driver_data;
struct gendisk *g = idkp->disk;
ide_cacheflush_p(drive);
- if (ide_unregister_subdriver(drive))
- return 1;
+
+ ide_unregister_subdriver(drive, idkp->driver);
+
del_gendisk(g);
ide_disk_put(idkp);
@@ -1052,7 +1054,7 @@
kfree(idkp);
}
-static int idedisk_attach(ide_drive_t *drive);
+static int ide_disk_probe(struct device *dev);
static void ide_device_shutdown(struct device *dev)
{
@@ -1082,27 +1084,23 @@
dev->bus->suspend(dev, PMSG_SUSPEND);
}
-/*
- * IDE subdriver functions, registered with ide.c
- */
static ide_driver_t idedisk_driver = {
.owner = THIS_MODULE,
.gen_driver = {
+ .name = "ide-disk",
+ .bus = &ide_bus_type,
+ .probe = ide_disk_probe,
+ .remove = ide_disk_remove,
.shutdown = ide_device_shutdown,
},
- .name = "ide-disk",
.version = IDEDISK_VERSION,
.media = ide_disk,
- .busy = 0,
.supports_dsc_overlap = 0,
- .cleanup = idedisk_cleanup,
.do_request = ide_do_rw_disk,
.end_request = ide_end_request,
.error = __ide_error,
.abort = __ide_abort,
.proc = idedisk_proc,
- .attach = idedisk_attach,
- .drives = LIST_HEAD_INIT(idedisk_driver.drives),
};
static int idedisk_open(struct inode *inode, struct file *filp)
@@ -1199,8 +1197,9 @@
MODULE_DESCRIPTION("ATA DISK Driver");
-static int idedisk_attach(ide_drive_t *drive)
+static int ide_disk_probe(struct device *dev)
{
+ ide_drive_t *drive = to_ide_device(dev);
struct ide_disk_obj *idkp;
struct gendisk *g;
@@ -1222,10 +1221,7 @@
ide_init_disk(g, drive);
- if (ide_register_subdriver(drive, &idedisk_driver)) {
- printk (KERN_ERR "ide-disk: %s: Failed to register the driver with ide.c\n", drive->name);
- goto out_put_disk;
- }
+ ide_register_subdriver(drive, &idedisk_driver);
memset(idkp, 0, sizeof(*idkp));
@@ -1239,7 +1235,6 @@
drive->driver_data = idkp;
- DRIVER(drive)->busy++;
idedisk_setup(drive);
if ((!drive->head || drive->head > 16) && !drive->select.b.lba) {
printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n",
@@ -1247,7 +1242,7 @@
drive->attach = 0;
} else
drive->attach = 1;
- DRIVER(drive)->busy--;
+
g->minors = 1 << PARTN_BITS;
strcpy(g->devfs_name, drive->devfs_name);
g->driverfs_dev = &drive->gendev;
@@ -1257,22 +1252,20 @@
add_disk(g);
return 0;
-out_put_disk:
- put_disk(g);
out_free_idkp:
kfree(idkp);
failed:
- return 1;
+ return -ENODEV;
}
static void __exit idedisk_exit (void)
{
- ide_unregister_driver(&idedisk_driver);
+ driver_unregister(&idedisk_driver.gen_driver);
}
static int idedisk_init (void)
{
- return ide_register_driver(&idedisk_driver);
+ return driver_register(&idedisk_driver.gen_driver);
}
module_init(idedisk_init);
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 36c0b74..c949e98 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -1865,13 +1865,13 @@
idefloppy_add_settings(drive);
}
-static int idefloppy_cleanup (ide_drive_t *drive)
+static int ide_floppy_remove(struct device *dev)
{
+ ide_drive_t *drive = to_ide_device(dev);
idefloppy_floppy_t *floppy = drive->driver_data;
struct gendisk *g = floppy->disk;
- if (ide_unregister_subdriver(drive))
- return 1;
+ ide_unregister_subdriver(drive, floppy->driver);
del_gendisk(g);
@@ -1916,26 +1916,24 @@
#endif /* CONFIG_PROC_FS */
-static int idefloppy_attach(ide_drive_t *drive);
+static int ide_floppy_probe(struct device *);
-/*
- * IDE subdriver functions, registered with ide.c
- */
static ide_driver_t idefloppy_driver = {
.owner = THIS_MODULE,
- .name = "ide-floppy",
+ .gen_driver = {
+ .name = "ide-floppy",
+ .bus = &ide_bus_type,
+ .probe = ide_floppy_probe,
+ .remove = ide_floppy_remove,
+ },
.version = IDEFLOPPY_VERSION,
.media = ide_floppy,
- .busy = 0,
.supports_dsc_overlap = 0,
- .cleanup = idefloppy_cleanup,
.do_request = idefloppy_do_request,
.end_request = idefloppy_do_end_request,
.error = __ide_error,
.abort = __ide_abort,
.proc = idefloppy_proc,
- .attach = idefloppy_attach,
- .drives = LIST_HEAD_INIT(idefloppy_driver.drives),
};
static int idefloppy_open(struct inode *inode, struct file *filp)
@@ -2122,8 +2120,9 @@
.revalidate_disk= idefloppy_revalidate_disk
};
-static int idefloppy_attach (ide_drive_t *drive)
+static int ide_floppy_probe(struct device *dev)
{
+ ide_drive_t *drive = to_ide_device(dev);
idefloppy_floppy_t *floppy;
struct gendisk *g;
@@ -2152,10 +2151,7 @@
ide_init_disk(g, drive);
- if (ide_register_subdriver(drive, &idefloppy_driver)) {
- printk (KERN_ERR "ide-floppy: %s: Failed to register the driver with ide.c\n", drive->name);
- goto out_put_disk;
- }
+ ide_register_subdriver(drive, &idefloppy_driver);
memset(floppy, 0, sizeof(*floppy));
@@ -2169,9 +2165,8 @@
drive->driver_data = floppy;
- DRIVER(drive)->busy++;
idefloppy_setup (drive, floppy);
- DRIVER(drive)->busy--;
+
g->minors = 1 << PARTN_BITS;
g->driverfs_dev = &drive->gendev;
strcpy(g->devfs_name, drive->devfs_name);
@@ -2181,19 +2176,17 @@
add_disk(g);
return 0;
-out_put_disk:
- put_disk(g);
out_free_floppy:
kfree(floppy);
failed:
- return 1;
+ return -ENODEV;
}
MODULE_DESCRIPTION("ATAPI FLOPPY Driver");
static void __exit idefloppy_exit (void)
{
- ide_unregister_driver(&idefloppy_driver);
+ driver_unregister(&idefloppy_driver.gen_driver);
}
/*
@@ -2202,8 +2195,7 @@
static int idefloppy_init (void)
{
printk("ide-floppy driver " IDEFLOPPY_VERSION "\n");
- ide_register_driver(&idefloppy_driver);
- return 0;
+ return driver_register(&idefloppy_driver.gen_driver);
}
module_init(idefloppy_init);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 554473a..5d876f5 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -47,6 +47,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/ide.h>
+#include <linux/devfs_fs_kernel.h>
#include <linux/spinlock.h>
#include <linux/kmod.h>
#include <linux/pci.h>
@@ -696,13 +697,13 @@
SELECT_DRIVE(&hwif->drives[0]);
hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
mdelay(2);
- rc = ide_wait_not_busy(hwif, 10000);
+ rc = ide_wait_not_busy(hwif, 35000);
if (rc)
return rc;
SELECT_DRIVE(&hwif->drives[1]);
hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
mdelay(2);
- rc = ide_wait_not_busy(hwif, 10000);
+ rc = ide_wait_not_busy(hwif, 35000);
/* Exit function with master reselected (let's be sane) */
SELECT_DRIVE(&hwif->drives[0]);
@@ -918,7 +919,7 @@
want them on default or a new "empty" class
for hotplug reprobing ? */
if (drive->present) {
- ata_attach(drive);
+ device_register(&drive->gendev);
}
}
}
@@ -1279,10 +1280,51 @@
EXPORT_SYMBOL_GPL(ide_init_disk);
+static void ide_remove_drive_from_hwgroup(ide_drive_t *drive)
+{
+ ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
+
+ if (drive == drive->next) {
+ /* special case: last drive from hwgroup. */
+ BUG_ON(hwgroup->drive != drive);
+ hwgroup->drive = NULL;
+ } else {
+ ide_drive_t *walk;
+
+ walk = hwgroup->drive;
+ while (walk->next != drive)
+ walk = walk->next;
+ walk->next = drive->next;
+ if (hwgroup->drive == drive) {
+ hwgroup->drive = drive->next;
+ hwgroup->hwif = hwgroup->drive->hwif;
+ }
+ }
+ BUG_ON(hwgroup->drive == drive);
+}
+
static void drive_release_dev (struct device *dev)
{
ide_drive_t *drive = container_of(dev, ide_drive_t, gendev);
+ spin_lock_irq(&ide_lock);
+ if (drive->devfs_name[0] != '\0') {
+ devfs_remove(drive->devfs_name);
+ drive->devfs_name[0] = '\0';
+ }
+ ide_remove_drive_from_hwgroup(drive);
+ if (drive->id != NULL) {
+ kfree(drive->id);
+ drive->id = NULL;
+ }
+ drive->present = 0;
+ /* Messed up locking ... */
+ spin_unlock_irq(&ide_lock);
+ blk_cleanup_queue(drive->queue);
+ spin_lock_irq(&ide_lock);
+ drive->queue = NULL;
+ spin_unlock_irq(&ide_lock);
+
up(&drive->gendev_rel_sem);
}
@@ -1306,7 +1348,6 @@
drive->gendev.driver_data = drive;
drive->gendev.release = drive_release_dev;
if (drive->present) {
- device_register(&drive->gendev);
sprintf(drive->devfs_name, "ide/host%d/bus%d/target%d/lun%d",
(hwif->channel && hwif->mate) ?
hwif->mate->index : hwif->index,
@@ -1412,7 +1453,7 @@
hwif->chipset = ide_generic;
for (unit = 0; unit < MAX_DRIVES; ++unit)
if (hwif->drives[unit].present)
- ata_attach(&hwif->drives[unit]);
+ device_register(&hwif->drives[unit].gendev);
}
}
return 0;
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index bdff5ac..4063d2c 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -307,17 +307,41 @@
(char *page, char **start, off_t off, int count, int *eof, void *data)
{
ide_drive_t *drive = (ide_drive_t *) data;
- ide_driver_t *driver = drive->driver;
+ struct device *dev = &drive->gendev;
+ ide_driver_t *ide_drv;
int len;
- if (driver) {
+ down_read(&dev->bus->subsys.rwsem);
+ if (dev->driver) {
+ ide_drv = container_of(dev->driver, ide_driver_t, gen_driver);
len = sprintf(page, "%s version %s\n",
- driver->name, driver->version);
+ dev->driver->name, ide_drv->version);
} else
len = sprintf(page, "ide-default version 0.9.newide\n");
+ up_read(&dev->bus->subsys.rwsem);
PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
}
+static int ide_replace_subdriver(ide_drive_t *drive, const char *driver)
+{
+ struct device *dev = &drive->gendev;
+ int ret = 1;
+
+ down_write(&dev->bus->subsys.rwsem);
+ device_release_driver(dev);
+ /* FIXME: device can still be in use by previous driver */
+ strlcpy(drive->driver_req, driver, sizeof(drive->driver_req));
+ device_attach(dev);
+ drive->driver_req[0] = 0;
+ if (dev->driver == NULL)
+ device_attach(dev);
+ if (dev->driver && !strcmp(dev->driver->name, driver))
+ ret = 0;
+ up_write(&dev->bus->subsys.rwsem);
+
+ return ret;
+}
+
static int proc_ide_write_driver
(struct file *file, const char __user *buffer, unsigned long count, void *data)
{
@@ -488,16 +512,32 @@
}
}
-extern struct seq_operations ide_drivers_op;
+static int proc_print_driver(struct device_driver *drv, void *data)
+{
+ ide_driver_t *ide_drv = container_of(drv, ide_driver_t, gen_driver);
+ struct seq_file *s = data;
+
+ seq_printf(s, "%s version %s\n", drv->name, ide_drv->version);
+
+ return 0;
+}
+
+static int ide_drivers_show(struct seq_file *s, void *p)
+{
+ bus_for_each_drv(&ide_bus_type, NULL, s, proc_print_driver);
+ return 0;
+}
+
static int ide_drivers_open(struct inode *inode, struct file *file)
{
- return seq_open(file, &ide_drivers_op);
+ return single_open(file, &ide_drivers_show, NULL);
}
+
static struct file_operations ide_drivers_operations = {
.open = ide_drivers_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = single_release,
};
void proc_ide_create(void)
@@ -516,6 +556,6 @@
void proc_ide_destroy(void)
{
- remove_proc_entry("ide/drivers", proc_ide_root);
+ remove_proc_entry("drivers", proc_ide_root);
remove_proc_entry("ide", NULL);
}
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 4825448..5a3dc46 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -4681,21 +4681,12 @@
idetape_add_settings(drive);
}
-static int idetape_cleanup (ide_drive_t *drive)
+static int ide_tape_remove(struct device *dev)
{
+ ide_drive_t *drive = to_ide_device(dev);
idetape_tape_t *tape = drive->driver_data;
- unsigned long flags;
- spin_lock_irqsave(&ide_lock, flags);
- if (test_bit(IDETAPE_BUSY, &tape->flags) || drive->usage ||
- tape->first_stage != NULL || tape->merge_stage_size) {
- spin_unlock_irqrestore(&ide_lock, flags);
- return 1;
- }
-
- spin_unlock_irqrestore(&ide_lock, flags);
- DRIVER(drive)->busy = 0;
- (void) ide_unregister_subdriver(drive);
+ ide_unregister_subdriver(drive, tape->driver);
ide_unregister_region(tape->disk);
@@ -4710,6 +4701,8 @@
ide_drive_t *drive = tape->drive;
struct gendisk *g = tape->disk;
+ BUG_ON(tape->first_stage != NULL || tape->merge_stage_size);
+
drive->dsc_overlap = 0;
drive->driver_data = NULL;
devfs_remove("%s/mt", drive->devfs_name);
@@ -4747,26 +4740,24 @@
#endif
-static int idetape_attach(ide_drive_t *drive);
+static int ide_tape_probe(struct device *);
-/*
- * IDE subdriver functions, registered with ide.c
- */
static ide_driver_t idetape_driver = {
.owner = THIS_MODULE,
- .name = "ide-tape",
+ .gen_driver = {
+ .name = "ide-tape",
+ .bus = &ide_bus_type,
+ .probe = ide_tape_probe,
+ .remove = ide_tape_remove,
+ },
.version = IDETAPE_VERSION,
.media = ide_tape,
- .busy = 1,
.supports_dsc_overlap = 1,
- .cleanup = idetape_cleanup,
.do_request = idetape_do_request,
.end_request = idetape_end_request,
.error = __ide_error,
.abort = __ide_abort,
.proc = idetape_proc,
- .attach = idetape_attach,
- .drives = LIST_HEAD_INIT(idetape_driver.drives),
};
/*
@@ -4829,8 +4820,9 @@
.ioctl = idetape_ioctl,
};
-static int idetape_attach (ide_drive_t *drive)
+static int ide_tape_probe(struct device *dev)
{
+ ide_drive_t *drive = to_ide_device(dev);
idetape_tape_t *tape;
struct gendisk *g;
int minor;
@@ -4865,10 +4857,7 @@
ide_init_disk(g, drive);
- if (ide_register_subdriver(drive, &idetape_driver)) {
- printk(KERN_ERR "ide-tape: %s: Failed to register the driver with ide.c\n", drive->name);
- goto out_put_disk;
- }
+ ide_register_subdriver(drive, &idetape_driver);
memset(tape, 0, sizeof(*tape));
@@ -4902,12 +4891,11 @@
ide_register_region(g);
return 0;
-out_put_disk:
- put_disk(g);
+
out_free_tape:
kfree(tape);
failed:
- return 1;
+ return -ENODEV;
}
MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver");
@@ -4915,7 +4903,7 @@
static void __exit idetape_exit (void)
{
- ide_unregister_driver(&idetape_driver);
+ driver_unregister(&idetape_driver.gen_driver);
unregister_chrdev(IDETAPE_MAJOR, "ht");
}
@@ -4928,8 +4916,7 @@
printk(KERN_ERR "ide-tape: Failed to register character device interface\n");
return -EBUSY;
}
- ide_register_driver(&idetape_driver);
- return 0;
+ return driver_register(&idetape_driver.gen_driver);
}
module_init(idetape_init);
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 973dec7..dae1bd5 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -196,8 +196,6 @@
EXPORT_SYMBOL(ide_hwifs);
-static struct list_head ide_drives = LIST_HEAD_INIT(ide_drives);
-
/*
* Do not even *think* about calling this!
*/
@@ -358,54 +356,6 @@
return system_bus_speed;
}
-/*
- * drives_lock protects the list of drives, drivers_lock the
- * list of drivers. Currently nobody takes both at once.
- */
-
-static DEFINE_SPINLOCK(drives_lock);
-static DEFINE_SPINLOCK(drivers_lock);
-static LIST_HEAD(drivers);
-
-/* Iterator for the driver list. */
-
-static void *m_start(struct seq_file *m, loff_t *pos)
-{
- struct list_head *p;
- loff_t l = *pos;
- spin_lock(&drivers_lock);
- list_for_each(p, &drivers)
- if (!l--)
- return list_entry(p, ide_driver_t, drivers);
- return NULL;
-}
-
-static void *m_next(struct seq_file *m, void *v, loff_t *pos)
-{
- struct list_head *p = ((ide_driver_t *)v)->drivers.next;
- (*pos)++;
- return p==&drivers ? NULL : list_entry(p, ide_driver_t, drivers);
-}
-
-static void m_stop(struct seq_file *m, void *v)
-{
- spin_unlock(&drivers_lock);
-}
-
-static int show_driver(struct seq_file *m, void *v)
-{
- ide_driver_t *driver = v;
- seq_printf(m, "%s version %s\n", driver->name, driver->version);
- return 0;
-}
-
-struct seq_operations ide_drivers_op = {
- .start = m_start,
- .next = m_next,
- .stop = m_stop,
- .show = show_driver
-};
-
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *proc_ide_root;
#endif
@@ -630,7 +580,7 @@
ide_hwif_t *hwif, *g;
static ide_hwif_t tmp_hwif; /* protected by ide_cfg_sem */
ide_hwgroup_t *hwgroup;
- int irq_count = 0, unit, i;
+ int irq_count = 0, unit;
BUG_ON(index >= MAX_HWIFS);
@@ -643,23 +593,22 @@
goto abort;
for (unit = 0; unit < MAX_DRIVES; ++unit) {
drive = &hwif->drives[unit];
- if (!drive->present)
+ if (!drive->present) {
+ if (drive->devfs_name[0] != '\0') {
+ devfs_remove(drive->devfs_name);
+ drive->devfs_name[0] = '\0';
+ }
continue;
- if (drive->usage || DRIVER(drive)->busy)
- goto abort;
- drive->dead = 1;
+ }
+ spin_unlock_irq(&ide_lock);
+ device_unregister(&drive->gendev);
+ down(&drive->gendev_rel_sem);
+ spin_lock_irq(&ide_lock);
}
hwif->present = 0;
spin_unlock_irq(&ide_lock);
- for (unit = 0; unit < MAX_DRIVES; ++unit) {
- drive = &hwif->drives[unit];
- if (!drive->present)
- continue;
- DRIVER(drive)->cleanup(drive);
- }
-
destroy_proc_ide_interface(hwif);
hwgroup = hwif->hwgroup;
@@ -687,44 +636,6 @@
* Remove us from the hwgroup, and free
* the hwgroup if we were the only member
*/
- for (i = 0; i < MAX_DRIVES; ++i) {
- drive = &hwif->drives[i];
- if (drive->devfs_name[0] != '\0') {
- devfs_remove(drive->devfs_name);
- drive->devfs_name[0] = '\0';
- }
- if (!drive->present)
- continue;
- if (drive == drive->next) {
- /* special case: last drive from hwgroup. */
- BUG_ON(hwgroup->drive != drive);
- hwgroup->drive = NULL;
- } else {
- ide_drive_t *walk;
-
- walk = hwgroup->drive;
- while (walk->next != drive)
- walk = walk->next;
- walk->next = drive->next;
- if (hwgroup->drive == drive) {
- hwgroup->drive = drive->next;
- hwgroup->hwif = HWIF(hwgroup->drive);
- }
- }
- BUG_ON(hwgroup->drive == drive);
- if (drive->id != NULL) {
- kfree(drive->id);
- drive->id = NULL;
- }
- drive->present = 0;
- /* Messed up locking ... */
- spin_unlock_irq(&ide_lock);
- blk_cleanup_queue(drive->queue);
- device_unregister(&drive->gendev);
- down(&drive->gendev_rel_sem);
- spin_lock_irq(&ide_lock);
- drive->queue = NULL;
- }
if (hwif->next == hwif) {
BUG_ON(hwgroup->hwif != hwif);
kfree(hwgroup);
@@ -1304,73 +1215,6 @@
EXPORT_SYMBOL(system_bus_clock);
-/*
- * Locking is badly broken here - since way back. That sucker is
- * root-only, but that's not an excuse... The real question is what
- * exclusion rules do we want here.
- */
-int ide_replace_subdriver (ide_drive_t *drive, const char *driver)
-{
- if (!drive->present || drive->usage || drive->dead)
- goto abort;
- if (DRIVER(drive)->cleanup(drive))
- goto abort;
- strlcpy(drive->driver_req, driver, sizeof(drive->driver_req));
- if (ata_attach(drive)) {
- spin_lock(&drives_lock);
- list_del_init(&drive->list);
- spin_unlock(&drives_lock);
- drive->driver_req[0] = 0;
- ata_attach(drive);
- } else {
- drive->driver_req[0] = 0;
- }
- if (drive->driver && !strcmp(drive->driver->name, driver))
- return 0;
-abort:
- return 1;
-}
-
-/**
- * ata_attach - attach an ATA/ATAPI device
- * @drive: drive to attach
- *
- * Takes a drive that is as yet not assigned to any midlayer IDE
- * driver (or is assigned to the default driver) and figures out
- * which driver would like to own it. If nobody claims the drive
- * then it is automatically attached to the default driver used for
- * unclaimed objects.
- *
- * A return of zero indicates attachment to a driver, of one
- * attachment to the default driver.
- *
- * Takes drivers_lock.
- */
-
-int ata_attach(ide_drive_t *drive)
-{
- struct list_head *p;
- spin_lock(&drivers_lock);
- list_for_each(p, &drivers) {
- ide_driver_t *driver = list_entry(p, ide_driver_t, drivers);
- if (!try_module_get(driver->owner))
- continue;
- spin_unlock(&drivers_lock);
- if (driver->attach(drive) == 0) {
- module_put(driver->owner);
- drive->gendev.driver = &driver->gen_driver;
- return 0;
- }
- spin_lock(&drivers_lock);
- module_put(driver->owner);
- }
- drive->gendev.driver = NULL;
- spin_unlock(&drivers_lock);
- if (ide_register_subdriver(drive, NULL))
- panic("ide: default attach failed");
- return 1;
-}
-
static int generic_ide_suspend(struct device *dev, pm_message_t state)
{
ide_drive_t *drive = dev->driver_data;
@@ -2013,27 +1857,11 @@
#endif
}
-int ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver)
+void ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver)
{
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
- if (!drive->present || drive->driver != NULL ||
- drive->usage || drive->dead) {
- spin_unlock_irqrestore(&ide_lock, flags);
- return 1;
- }
- drive->driver = driver;
- spin_unlock_irqrestore(&ide_lock, flags);
- spin_lock(&drives_lock);
- list_add_tail(&drive->list, driver ? &driver->drives : &ide_drives);
- spin_unlock(&drives_lock);
-// printk(KERN_INFO "%s: attached %s driver.\n", drive->name, driver->name);
#ifdef CONFIG_PROC_FS
- if (driver)
- ide_add_proc_entries(drive->proc, driver->proc, drive);
+ ide_add_proc_entries(drive->proc, driver->proc, drive);
#endif
- return 0;
}
EXPORT_SYMBOL(ide_register_subdriver);
@@ -2041,136 +1869,51 @@
/**
* ide_unregister_subdriver - disconnect drive from driver
* @drive: drive to unplug
+ * @driver: driver
*
* Disconnect a drive from the driver it was attached to and then
* clean up the various proc files and other objects attached to it.
*
- * Takes ide_setting_sem, ide_lock and drives_lock.
+ * Takes ide_setting_sem and ide_lock.
* Caller must hold none of the locks.
- *
- * No locking versus subdriver unload because we are moving to the
- * default driver anyway. Wants double checking.
*/
-int ide_unregister_subdriver (ide_drive_t *drive)
+void ide_unregister_subdriver(ide_drive_t *drive, ide_driver_t *driver)
{
unsigned long flags;
down(&ide_setting_sem);
spin_lock_irqsave(&ide_lock, flags);
- if (drive->usage || drive->driver == NULL || DRIVER(drive)->busy) {
- spin_unlock_irqrestore(&ide_lock, flags);
- up(&ide_setting_sem);
- return 1;
- }
#ifdef CONFIG_PROC_FS
- ide_remove_proc_entries(drive->proc, DRIVER(drive)->proc);
+ ide_remove_proc_entries(drive->proc, driver->proc);
#endif
auto_remove_settings(drive);
- drive->driver = NULL;
spin_unlock_irqrestore(&ide_lock, flags);
up(&ide_setting_sem);
- spin_lock(&drives_lock);
- list_del_init(&drive->list);
- spin_unlock(&drives_lock);
- /* drive will be added to &ide_drives in ata_attach() */
- return 0;
}
EXPORT_SYMBOL(ide_unregister_subdriver);
-static int ide_drive_remove(struct device * dev)
-{
- ide_drive_t * drive = container_of(dev,ide_drive_t,gendev);
- DRIVER(drive)->cleanup(drive);
- return 0;
-}
-
-/**
- * ide_register_driver - register IDE device driver
- * @driver: the IDE device driver
- *
- * Register a new device driver and then scan the devices
- * on the IDE bus in case any should be attached to the
- * driver we have just registered. If so attach them.
- *
- * Takes drivers_lock and drives_lock.
- */
-
-int ide_register_driver(ide_driver_t *driver)
-{
- struct list_head list;
- struct list_head *list_loop;
- struct list_head *tmp_storage;
-
- spin_lock(&drivers_lock);
- list_add(&driver->drivers, &drivers);
- spin_unlock(&drivers_lock);
-
- INIT_LIST_HEAD(&list);
- spin_lock(&drives_lock);
- list_splice_init(&ide_drives, &list);
- spin_unlock(&drives_lock);
-
- list_for_each_safe(list_loop, tmp_storage, &list) {
- ide_drive_t *drive = container_of(list_loop, ide_drive_t, list);
- list_del_init(&drive->list);
- if (drive->present)
- ata_attach(drive);
- }
- driver->gen_driver.name = (char *) driver->name;
- driver->gen_driver.bus = &ide_bus_type;
- driver->gen_driver.remove = ide_drive_remove;
- return driver_register(&driver->gen_driver);
-}
-
-EXPORT_SYMBOL(ide_register_driver);
-
-/**
- * ide_unregister_driver - unregister IDE device driver
- * @driver: the IDE device driver
- *
- * Called when a driver module is being unloaded. We reattach any
- * devices to whatever driver claims them next (typically the default
- * driver).
- *
- * Takes drivers_lock and called functions will take ide_setting_sem.
- */
-
-void ide_unregister_driver(ide_driver_t *driver)
-{
- ide_drive_t *drive;
-
- spin_lock(&drivers_lock);
- list_del(&driver->drivers);
- spin_unlock(&drivers_lock);
-
- driver_unregister(&driver->gen_driver);
-
- while(!list_empty(&driver->drives)) {
- drive = list_entry(driver->drives.next, ide_drive_t, list);
- if (driver->cleanup(drive)) {
- printk(KERN_ERR "%s: cleanup_module() called while still busy\n", drive->name);
- BUG();
- }
- ata_attach(drive);
- }
-}
-
-EXPORT_SYMBOL(ide_unregister_driver);
-
/*
* Probe module
*/
EXPORT_SYMBOL(ide_lock);
+static int ide_bus_match(struct device *dev, struct device_driver *drv)
+{
+ return 1;
+}
+
struct bus_type ide_bus_type = {
.name = "ide",
+ .match = ide_bus_match,
.suspend = generic_ide_suspend,
.resume = generic_ide_resume,
};
+EXPORT_SYMBOL_GPL(ide_bus_type);
+
/*
* This is gets invoked once during initialization, to set *everything* up
*/
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 47225e3..4e0f13d 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -72,6 +72,7 @@
{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, AMD_UDMA_133 },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, AMD_UDMA_133 },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, AMD_UDMA_133 },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, AMD_UDMA_133 },
{ 0 }
};
@@ -487,6 +488,7 @@
/* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"),
/* 13 */ DECLARE_NV_DEV("NFORCE-CK804"),
/* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"),
+ /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"),
};
static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -521,6 +523,7 @@
#endif
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
index 78b201f..7d58af1 100644
--- a/drivers/ieee1394/Kconfig
+++ b/drivers/ieee1394/Kconfig
@@ -84,11 +84,6 @@
To compile this driver as a module, say M here: the
module will be called pcilynx.
-# Non-maintained pcilynx options
-# if [ "$CONFIG_IEEE1394_PCILYNX" != "n" ]; then
-# bool ' Use PCILynx local RAM' CONFIG_IEEE1394_PCILYNX_LOCALRAM
-# bool ' Support for non-IEEE1394 local ports' CONFIG_IEEE1394_PCILYNX_PORTS
-# fi
config IEEE1394_OHCI1394
tristate "OHCI-1394 support"
depends on PCI && IEEE1394
diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c
index 1c5845f..a294e45 100644
--- a/drivers/ieee1394/ieee1394_core.c
+++ b/drivers/ieee1394/ieee1394_core.c
@@ -520,7 +520,7 @@
if (!packet->no_waiter || packet->expect_response) {
atomic_inc(&packet->refcnt);
- packet->sendtime = jiffies;
+ packet->sendtime = jiffies + 10 * HZ;
skb_queue_tail(&host->pending_packet_queue, packet->skb);
}
@@ -1248,7 +1248,6 @@
EXPORT_SYMBOL(hpsb_make_isopacket);
EXPORT_SYMBOL(hpsb_read);
EXPORT_SYMBOL(hpsb_write);
-EXPORT_SYMBOL(hpsb_lock);
EXPORT_SYMBOL(hpsb_packet_success);
/** highlevel.c **/
diff --git a/drivers/ieee1394/ieee1394_transactions.c b/drivers/ieee1394/ieee1394_transactions.c
index 09908b9..0aa8763 100644
--- a/drivers/ieee1394/ieee1394_transactions.c
+++ b/drivers/ieee1394/ieee1394_transactions.c
@@ -535,6 +535,7 @@
return retval;
}
+#if 0
int hpsb_lock(struct hpsb_host *host, nodeid_t node, unsigned int generation,
u64 addr, int extcode, quadlet_t *data, quadlet_t arg)
@@ -599,3 +600,5 @@
return retval;
}
+
+#endif /* 0 */
diff --git a/drivers/ieee1394/ieee1394_transactions.h b/drivers/ieee1394/ieee1394_transactions.h
index 526a43c..45ba784 100644
--- a/drivers/ieee1394/ieee1394_transactions.h
+++ b/drivers/ieee1394/ieee1394_transactions.h
@@ -53,12 +53,5 @@
u64 addr, quadlet_t *buffer, size_t length);
int hpsb_write(struct hpsb_host *host, nodeid_t node, unsigned int generation,
u64 addr, quadlet_t *buffer, size_t length);
-int hpsb_lock(struct hpsb_host *host, nodeid_t node, unsigned int generation,
- u64 addr, int extcode, quadlet_t *data, quadlet_t arg);
-int hpsb_lock64(struct hpsb_host *host, nodeid_t node, unsigned int generation,
- u64 addr, int extcode, octlet_t *data, octlet_t arg);
-int hpsb_send_gasp(struct hpsb_host *host, int channel, unsigned int generation,
- quadlet_t *buffer, size_t length, u32 specifier_id,
- unsigned int version);
#endif /* _IEEE1394_TRANSACTIONS_H */
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index a1e30a6..83e66ed9 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -1005,8 +1005,7 @@
return ud;
unit_directory_error:
- if (ud != NULL)
- kfree(ud);
+ kfree(ud);
return NULL;
}
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index 6cb0b58..36e25ac 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -2931,7 +2931,7 @@
kfree(d->prg_cpu);
kfree(d->prg_bus);
}
- if (d->spb) kfree(d->spb);
+ kfree(d->spb);
/* Mark this context as freed. */
d->ohci = NULL;
diff --git a/drivers/ieee1394/ohci1394.h b/drivers/ieee1394/ohci1394.h
index d1758d4..cc66c1c 100644
--- a/drivers/ieee1394/ohci1394.h
+++ b/drivers/ieee1394/ohci1394.h
@@ -236,6 +236,9 @@
static inline int cross_bound(unsigned long addr, unsigned int size)
{
+ if (size == 0)
+ return 0;
+
if (size > PAGE_SIZE)
return 1;
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index a261d2b..bdb3a85 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -43,6 +43,7 @@
#include <linux/fs.h>
#include <linux/poll.h>
#include <linux/kdev_t.h>
+#include <linux/dma-mapping.h>
#include <asm/byteorder.h>
#include <asm/atomic.h>
#include <asm/io.h>
@@ -834,327 +835,6 @@
* IEEE-1394 functionality section END *
***************************************/
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
-/* VFS functions for local bus / aux device access. Access to those
- * is implemented as a character device instead of block devices
- * because buffers are not wanted for this. Therefore llseek (from
- * VFS) can be used for these char devices with obvious effects.
- */
-static int mem_open(struct inode*, struct file*);
-static int mem_release(struct inode*, struct file*);
-static unsigned int aux_poll(struct file*, struct poll_table_struct*);
-static loff_t mem_llseek(struct file*, loff_t, int);
-static ssize_t mem_read (struct file*, char*, size_t, loff_t*);
-static ssize_t mem_write(struct file*, const char*, size_t, loff_t*);
-
-
-static struct file_operations aux_ops = {
- .owner = THIS_MODULE,
- .read = mem_read,
- .write = mem_write,
- .poll = aux_poll,
- .llseek = mem_llseek,
- .open = mem_open,
- .release = mem_release,
-};
-
-
-static void aux_setup_pcls(struct ti_lynx *lynx)
-{
- struct ti_pcl pcl;
-
- pcl.next = PCL_NEXT_INVALID;
- pcl.user_data = pcl_bus(lynx, lynx->dmem_pcl);
- put_pcl(lynx, lynx->dmem_pcl, &pcl);
-}
-
-static int mem_open(struct inode *inode, struct file *file)
-{
- int cid = iminor(inode);
- enum { t_rom, t_aux, t_ram } type;
- struct memdata *md;
-
- if (cid < PCILYNX_MINOR_AUX_START) {
- /* just for completeness */
- return -ENXIO;
- } else if (cid < PCILYNX_MINOR_ROM_START) {
- cid -= PCILYNX_MINOR_AUX_START;
- if (cid >= num_of_cards || !cards[cid].aux_port)
- return -ENXIO;
- type = t_aux;
- } else if (cid < PCILYNX_MINOR_RAM_START) {
- cid -= PCILYNX_MINOR_ROM_START;
- if (cid >= num_of_cards || !cards[cid].local_rom)
- return -ENXIO;
- type = t_rom;
- } else {
- /* WARNING: Know what you are doing when opening RAM.
- * It is currently used inside the driver! */
- cid -= PCILYNX_MINOR_RAM_START;
- if (cid >= num_of_cards || !cards[cid].local_ram)
- return -ENXIO;
- type = t_ram;
- }
-
- md = (struct memdata *)kmalloc(sizeof(struct memdata), SLAB_KERNEL);
- if (md == NULL)
- return -ENOMEM;
-
- md->lynx = &cards[cid];
- md->cid = cid;
-
- switch (type) {
- case t_rom:
- md->type = rom;
- break;
- case t_ram:
- md->type = ram;
- break;
- case t_aux:
- atomic_set(&md->aux_intr_last_seen,
- atomic_read(&cards[cid].aux_intr_seen));
- md->type = aux;
- break;
- }
-
- file->private_data = md;
-
- return 0;
-}
-
-static int mem_release(struct inode *inode, struct file *file)
-{
- kfree(file->private_data);
- return 0;
-}
-
-static unsigned int aux_poll(struct file *file, poll_table *pt)
-{
- struct memdata *md = (struct memdata *)file->private_data;
- int cid = md->cid;
- unsigned int mask;
-
- /* reading and writing is always allowed */
- mask = POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM;
-
- if (md->type == aux) {
- poll_wait(file, &cards[cid].aux_intr_wait, pt);
-
- if (atomic_read(&md->aux_intr_last_seen)
- != atomic_read(&cards[cid].aux_intr_seen)) {
- mask |= POLLPRI;
- atomic_inc(&md->aux_intr_last_seen);
- }
- }
-
- return mask;
-}
-
-loff_t mem_llseek(struct file *file, loff_t offs, int orig)
-{
- loff_t newoffs;
-
- switch (orig) {
- case 0:
- newoffs = offs;
- break;
- case 1:
- newoffs = offs + file->f_pos;
- break;
- case 2:
- newoffs = PCILYNX_MAX_MEMORY + 1 + offs;
- break;
- default:
- return -EINVAL;
- }
-
- if (newoffs < 0 || newoffs > PCILYNX_MAX_MEMORY + 1) return -EINVAL;
-
- file->f_pos = newoffs;
- return newoffs;
-}
-
-/*
- * do not DMA if count is too small because this will have a serious impact
- * on performance - the value 2400 was found by experiment and may not work
- * everywhere as good as here - use mem_mindma option for modules to change
- */
-static short mem_mindma = 2400;
-module_param(mem_mindma, short, 0444);
-MODULE_PARM_DESC(mem_mindma, "Minimum amount of data required to use DMA");
-
-static ssize_t mem_dmaread(struct memdata *md, u32 physbuf, ssize_t count,
- int offset)
-{
- pcltmp_t pcltmp;
- struct ti_pcl *pcl;
- size_t retval;
- int i;
- DECLARE_WAITQUEUE(wait, current);
-
- count &= ~3;
- count = min(count, 53196);
- retval = count;
-
- if (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS))
- & DMA_CHAN_CTRL_BUSY) {
- PRINT(KERN_WARNING, md->lynx->id, "DMA ALREADY ACTIVE!");
- }
-
- reg_write(md->lynx, LBUS_ADDR, md->type | offset);
-
- pcl = edit_pcl(md->lynx, md->lynx->dmem_pcl, &pcltmp);
- pcl->buffer[0].control = PCL_CMD_LBUS_TO_PCI | min(count, 4092);
- pcl->buffer[0].pointer = physbuf;
- count -= 4092;
-
- i = 0;
- while (count > 0) {
- i++;
- pcl->buffer[i].control = min(count, 4092);
- pcl->buffer[i].pointer = physbuf + i * 4092;
- count -= 4092;
- }
- pcl->buffer[i].control |= PCL_LAST_BUFF;
- commit_pcl(md->lynx, md->lynx->dmem_pcl, &pcltmp);
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&md->lynx->mem_dma_intr_wait, &wait);
- run_sub_pcl(md->lynx, md->lynx->dmem_pcl, 2, CHANNEL_LOCALBUS);
-
- schedule();
- while (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS))
- & DMA_CHAN_CTRL_BUSY) {
- if (signal_pending(current)) {
- retval = -EINTR;
- break;
- }
- schedule();
- }
-
- reg_write(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS), 0);
- remove_wait_queue(&md->lynx->mem_dma_intr_wait, &wait);
-
- if (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS))
- & DMA_CHAN_CTRL_BUSY) {
- PRINT(KERN_ERR, md->lynx->id, "DMA STILL ACTIVE!");
- }
-
- return retval;
-}
-
-static ssize_t mem_read(struct file *file, char *buffer, size_t count,
- loff_t *offset)
-{
- struct memdata *md = (struct memdata *)file->private_data;
- ssize_t bcount;
- size_t alignfix;
- loff_t off = *offset; /* avoid useless 64bit-arithmetic */
- ssize_t retval;
- void *membase;
-
- if ((off + count) > PCILYNX_MAX_MEMORY+1) {
- count = PCILYNX_MAX_MEMORY+1 - off;
- }
- if (count == 0 || off > PCILYNX_MAX_MEMORY) {
- return -ENOSPC;
- }
-
- switch (md->type) {
- case rom:
- membase = md->lynx->local_rom;
- break;
- case ram:
- membase = md->lynx->local_ram;
- break;
- case aux:
- membase = md->lynx->aux_port;
- break;
- default:
- panic("pcilynx%d: unsupported md->type %d in %s",
- md->lynx->id, md->type, __FUNCTION__);
- }
-
- down(&md->lynx->mem_dma_mutex);
-
- if (count < mem_mindma) {
- memcpy_fromio(md->lynx->mem_dma_buffer, membase+off, count);
- goto out;
- }
-
- bcount = count;
- alignfix = 4 - (off % 4);
- if (alignfix != 4) {
- if (bcount < alignfix) {
- alignfix = bcount;
- }
- memcpy_fromio(md->lynx->mem_dma_buffer, membase+off,
- alignfix);
- if (bcount == alignfix) {
- goto out;
- }
- bcount -= alignfix;
- off += alignfix;
- }
-
- while (bcount >= 4) {
- retval = mem_dmaread(md, md->lynx->mem_dma_buffer_dma
- + count - bcount, bcount, off);
- if (retval < 0) return retval;
-
- bcount -= retval;
- off += retval;
- }
-
- if (bcount) {
- memcpy_fromio(md->lynx->mem_dma_buffer + count - bcount,
- membase+off, bcount);
- }
-
- out:
- retval = copy_to_user(buffer, md->lynx->mem_dma_buffer, count);
- up(&md->lynx->mem_dma_mutex);
-
- if (retval) return -EFAULT;
- *offset += count;
- return count;
-}
-
-
-static ssize_t mem_write(struct file *file, const char *buffer, size_t count,
- loff_t *offset)
-{
- struct memdata *md = (struct memdata *)file->private_data;
-
- if (((*offset) + count) > PCILYNX_MAX_MEMORY+1) {
- count = PCILYNX_MAX_MEMORY+1 - *offset;
- }
- if (count == 0 || *offset > PCILYNX_MAX_MEMORY) {
- return -ENOSPC;
- }
-
- /* FIXME: dereferencing pointers to PCI mem doesn't work everywhere */
- switch (md->type) {
- case aux:
- if (copy_from_user(md->lynx->aux_port+(*offset), buffer, count))
- return -EFAULT;
- break;
- case ram:
- if (copy_from_user(md->lynx->local_ram+(*offset), buffer, count))
- return -EFAULT;
- break;
- case rom:
- /* the ROM may be writeable */
- if (copy_from_user(md->lynx->local_rom+(*offset), buffer, count))
- return -EFAULT;
- break;
- }
-
- file->f_pos += count;
- return count;
-}
-#endif /* CONFIG_IEEE1394_PCILYNX_PORTS */
-
/********************************************************
* Global stuff (interrupt handler, init/shutdown code) *
@@ -1181,18 +861,6 @@
reg_write(lynx, LINK_INT_STATUS, linkint);
reg_write(lynx, PCI_INT_STATUS, intmask);
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
- if (intmask & PCI_INT_AUX_INT) {
- atomic_inc(&lynx->aux_intr_seen);
- wake_up_interruptible(&lynx->aux_intr_wait);
- }
-
- if (intmask & PCI_INT_DMA_HLT(CHANNEL_LOCALBUS)) {
- wake_up_interruptible(&lynx->mem_dma_intr_wait);
- }
-#endif
-
-
if (intmask & PCI_INT_1394) {
if (linkint & LINK_INT_PHY_TIMEOUT) {
PRINT(KERN_INFO, lynx->id, "PHY timeout occurred");
@@ -1484,15 +1152,9 @@
pci_free_consistent(lynx->dev, PAGE_SIZE, lynx->rcv_page,
lynx->rcv_page_dma);
case have_aux_buf:
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
- pci_free_consistent(lynx->dev, 65536, lynx->mem_dma_buffer,
- lynx->mem_dma_buffer_dma);
-#endif
case have_pcl_mem:
-#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM
pci_free_consistent(lynx->dev, LOCALRAM_SIZE, lynx->pcl_mem,
lynx->pcl_mem_dma);
-#endif
case clear:
/* do nothing - already freed */
;
@@ -1524,7 +1186,7 @@
error = -ENXIO;
- if (pci_set_dma_mask(dev, 0xffffffff))
+ if (pci_set_dma_mask(dev, DMA_32BIT_MASK))
FAIL("DMA address limits not supported for PCILynx hardware");
if (pci_enable_device(dev))
FAIL("failed to enable PCILynx hardware");
@@ -1546,7 +1208,6 @@
spin_lock_init(&lynx->lock);
spin_lock_init(&lynx->phy_reg_lock);
-#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM
lynx->pcl_mem = pci_alloc_consistent(dev, LOCALRAM_SIZE,
&lynx->pcl_mem_dma);
@@ -1558,16 +1219,6 @@
} else {
FAIL("failed to allocate PCL memory area");
}
-#endif
-
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
- lynx->mem_dma_buffer = pci_alloc_consistent(dev, 65536,
- &lynx->mem_dma_buffer_dma);
- if (lynx->mem_dma_buffer == NULL) {
- FAIL("failed to allocate DMA buffer for aux");
- }
- lynx->state = have_aux_buf;
-#endif
lynx->rcv_page = pci_alloc_consistent(dev, PAGE_SIZE,
&lynx->rcv_page_dma);
@@ -1597,13 +1248,6 @@
FAIL("failed to remap registers - card not accessible");
}
-#ifdef CONFIG_IEEE1394_PCILYNX_LOCALRAM
- if (lynx->local_ram == NULL) {
- FAIL("failed to remap local RAM which is required for "
- "operation");
- }
-#endif
-
reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
/* Fix buggy cards with autoboot pin not tied low: */
reg_write(lynx, DMA0_CHAN_CTRL, 0);
@@ -1624,13 +1268,6 @@
/* alloc_pcl return values are not checked, it is expected that the
* provided PCL space is sufficient for the initial allocations */
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
- if (lynx->aux_port != NULL) {
- lynx->dmem_pcl = alloc_pcl(lynx);
- aux_setup_pcls(lynx);
- sema_init(&lynx->mem_dma_mutex, 1);
- }
-#endif
lynx->rcv_pcl = alloc_pcl(lynx);
lynx->rcv_pcl_start = alloc_pcl(lynx);
lynx->async.pcl = alloc_pcl(lynx);
@@ -1647,12 +1284,6 @@
reg_write(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL);
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
- reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_AUX_INT);
- init_waitqueue_head(&lynx->mem_dma_intr_wait);
- init_waitqueue_head(&lynx->aux_intr_wait);
-#endif
-
tasklet_init(&lynx->iso_rcv.tq, (void (*)(unsigned long))iso_rcv_bh,
(unsigned long)lynx);
@@ -1944,37 +1575,18 @@
{
int ret;
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
- if (register_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME, &aux_ops)) {
- PRINT_G(KERN_ERR, "allocation of char major number %d failed",
- PCILYNX_MAJOR);
- return -EBUSY;
- }
-#endif
-
ret = pci_register_driver(&lynx_pci_driver);
if (ret < 0) {
PRINT_G(KERN_ERR, "PCI module init failed");
- goto free_char_dev;
+ return ret;
}
return 0;
-
- free_char_dev:
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
- unregister_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME);
-#endif
-
- return ret;
}
static void __exit pcilynx_cleanup(void)
{
pci_unregister_driver(&lynx_pci_driver);
-
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
- unregister_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME);
-#endif
}
diff --git a/drivers/ieee1394/pcilynx.h b/drivers/ieee1394/pcilynx.h
index 644ec55..d631aa8 100644
--- a/drivers/ieee1394/pcilynx.h
+++ b/drivers/ieee1394/pcilynx.h
@@ -55,16 +55,6 @@
void __iomem *aux_port;
quadlet_t bus_info_block[5];
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
- atomic_t aux_intr_seen;
- wait_queue_head_t aux_intr_wait;
-
- void *mem_dma_buffer;
- dma_addr_t mem_dma_buffer_dma;
- struct semaphore mem_dma_mutex;
- wait_queue_head_t mem_dma_intr_wait;
-#endif
-
/*
* use local RAM of LOCALRAM_SIZE bytes for PCLs, which allows for
* LOCALRAM_SIZE * 8 PCLs (each sized 128 bytes);
@@ -72,11 +62,9 @@
*/
u8 pcl_bmap[LOCALRAM_SIZE / 1024];
-#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM
/* point to PCLs memory area if needed */
void *pcl_mem;
dma_addr_t pcl_mem_dma;
-#endif
/* PCLs for local mem / aux transfers */
pcl_t dmem_pcl;
@@ -378,39 +366,6 @@
#define pcloffs(MEMBER) (offsetof(struct ti_pcl, MEMBER))
-#ifdef CONFIG_IEEE1394_PCILYNX_LOCALRAM
-
-static inline void put_pcl(const struct ti_lynx *lynx, pcl_t pclid,
- const struct ti_pcl *pcl)
-{
- int i;
- u32 *in = (u32 *)pcl;
- u32 *out = (u32 *)(lynx->local_ram + pclid * sizeof(struct ti_pcl));
-
- for (i = 0; i < 32; i++, out++, in++) {
- writel(*in, out);
- }
-}
-
-static inline void get_pcl(const struct ti_lynx *lynx, pcl_t pclid,
- struct ti_pcl *pcl)
-{
- int i;
- u32 *out = (u32 *)pcl;
- u32 *in = (u32 *)(lynx->local_ram + pclid * sizeof(struct ti_pcl));
-
- for (i = 0; i < 32; i++, out++, in++) {
- *out = readl(in);
- }
-}
-
-static inline u32 pcl_bus(const struct ti_lynx *lynx, pcl_t pclid)
-{
- return pci_resource_start(lynx->dev, 1) + pclid * sizeof(struct ti_pcl);
-}
-
-#else /* CONFIG_IEEE1394_PCILYNX_LOCALRAM */
-
static inline void put_pcl(const struct ti_lynx *lynx, pcl_t pclid,
const struct ti_pcl *pcl)
{
@@ -431,10 +386,8 @@
return lynx->pcl_mem_dma + pclid * sizeof(struct ti_pcl);
}
-#endif /* CONFIG_IEEE1394_PCILYNX_LOCALRAM */
-
-#if defined (CONFIG_IEEE1394_PCILYNX_LOCALRAM) || defined (__BIG_ENDIAN)
+#if defined (__BIG_ENDIAN)
typedef struct ti_pcl pcltmp_t;
static inline struct ti_pcl *edit_pcl(const struct ti_lynx *lynx, pcl_t pclid,
diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c
index 4bedf71..d68c465 100644
--- a/drivers/ieee1394/video1394.c
+++ b/drivers/ieee1394/video1394.c
@@ -35,6 +35,11 @@
*
*/
+/* Markus Tavenrath <speedygoo@speedygoo.de> :
+ - fixed checks for valid buffer-numbers in video1394_icotl
+ - changed the ways the dma prg's are used, now it's possible to use
+ even a single dma buffer
+*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/list.h>
@@ -112,6 +117,7 @@
struct it_dma_prg **it_prg;
unsigned int *buffer_status;
+ unsigned int *buffer_prg_assignment;
struct timeval *buffer_time; /* time when the buffer was received */
unsigned int *last_used_cmd; /* For ISO Transmit with
variable sized packets only ! */
@@ -180,23 +186,14 @@
kfree(d->prg_reg);
}
- if (d->ir_prg)
- kfree(d->ir_prg);
-
- if (d->it_prg)
- kfree(d->it_prg);
-
- if (d->buffer_status)
- kfree(d->buffer_status);
- if (d->buffer_time)
- kfree(d->buffer_time);
- if (d->last_used_cmd)
- kfree(d->last_used_cmd);
- if (d->next_buffer)
- kfree(d->next_buffer);
-
+ kfree(d->ir_prg);
+ kfree(d->it_prg);
+ kfree(d->buffer_status);
+ kfree(d->buffer_prg_assignment);
+ kfree(d->buffer_time);
+ kfree(d->last_used_cmd);
+ kfree(d->next_buffer);
list_del(&d->link);
-
kfree(d);
return 0;
@@ -230,7 +227,7 @@
/* Init the regions for easy cleanup */
dma_region_init(&d->dma);
- if (dma_region_alloc(&d->dma, d->num_desc * d->buf_size, ohci->dev,
+ if (dma_region_alloc(&d->dma, (d->num_desc - 1) * d->buf_size, ohci->dev,
PCI_DMA_BIDIRECTIONAL)) {
PRINT(KERN_ERR, ohci->host->id, "Failed to allocate dma buffer");
free_dma_iso_ctx(d);
@@ -342,6 +339,8 @@
d->buffer_status = kmalloc(d->num_desc * sizeof(unsigned int),
GFP_KERNEL);
+ d->buffer_prg_assignment = kmalloc(d->num_desc * sizeof(unsigned int),
+ GFP_KERNEL);
d->buffer_time = kmalloc(d->num_desc * sizeof(struct timeval),
GFP_KERNEL);
d->last_used_cmd = kmalloc(d->num_desc * sizeof(unsigned int),
@@ -354,6 +353,11 @@
free_dma_iso_ctx(d);
return NULL;
}
+ if (d->buffer_prg_assignment == NULL) {
+ PRINT(KERN_ERR, ohci->host->id, "Failed to allocate buffer_prg_assignment");
+ free_dma_iso_ctx(d);
+ return NULL;
+ }
if (d->buffer_time == NULL) {
PRINT(KERN_ERR, ohci->host->id, "Failed to allocate buffer_time");
free_dma_iso_ctx(d);
@@ -370,6 +374,7 @@
return NULL;
}
memset(d->buffer_status, 0, d->num_desc * sizeof(unsigned int));
+ memset(d->buffer_prg_assignment, 0, d->num_desc * sizeof(unsigned int));
memset(d->buffer_time, 0, d->num_desc * sizeof(struct timeval));
memset(d->last_used_cmd, 0, d->num_desc * sizeof(unsigned int));
memset(d->next_buffer, -1, d->num_desc * sizeof(int));
@@ -379,7 +384,7 @@
PRINT(KERN_INFO, ohci->host->id, "Iso %s DMA: %d buffers "
"of size %d allocated for a frame size %d, each with %d prgs",
(type == OHCI_ISO_RECEIVE) ? "receive" : "transmit",
- d->num_desc, d->buf_size, d->frame_size, d->nb_cmd);
+ d->num_desc - 1, d->buf_size, d->frame_size, d->nb_cmd);
return d;
}
@@ -394,11 +399,36 @@
d->ir_prg[n][i].status = cpu_to_le32(d->left_size);
}
+static void reprogram_dma_ir_prg(struct dma_iso_ctx *d, int n, int buffer, int flags)
+{
+ struct dma_cmd *ir_prg = d->ir_prg[n];
+ unsigned long buf = (unsigned long)d->dma.kvirt + buffer * d->buf_size;
+ int i;
+
+ d->buffer_prg_assignment[n] = buffer;
+
+ ir_prg[0].address = cpu_to_le32(dma_region_offset_to_bus(&d->dma, buf -
+ (unsigned long)d->dma.kvirt));
+ ir_prg[1].address = cpu_to_le32(dma_region_offset_to_bus(&d->dma,
+ (buf + 4) - (unsigned long)d->dma.kvirt));
+
+ for (i=2;i<d->nb_cmd-1;i++) {
+ ir_prg[i].address = cpu_to_le32(dma_region_offset_to_bus(&d->dma,
+ (buf+(i-1)*PAGE_SIZE) -
+ (unsigned long)d->dma.kvirt));
+ }
+
+ ir_prg[i].control = cpu_to_le32(DMA_CTL_INPUT_MORE | DMA_CTL_UPDATE |
+ DMA_CTL_IRQ | DMA_CTL_BRANCH | d->left_size);
+ ir_prg[i].address = cpu_to_le32(dma_region_offset_to_bus(&d->dma,
+ (buf+(i-1)*PAGE_SIZE) - (unsigned long)d->dma.kvirt));
+}
+
static void initialize_dma_ir_prg(struct dma_iso_ctx *d, int n, int flags)
{
struct dma_cmd *ir_prg = d->ir_prg[n];
struct dma_prog_region *ir_reg = &d->prg_reg[n];
- unsigned long buf = (unsigned long)d->dma.kvirt + n * d->buf_size;
+ unsigned long buf = (unsigned long)d->dma.kvirt;
int i;
/* the first descriptor will read only 4 bytes */
@@ -508,7 +538,7 @@
for (i = 0; i < d->num_desc; i++) {
if (d->ir_prg[i][d->nb_cmd-1].status & cpu_to_le32(0xFFFF0000)) {
reset_ir_status(d, i);
- d->buffer_status[i] = VIDEO1394_BUFFER_READY;
+ d->buffer_status[d->buffer_prg_assignment[i]] = VIDEO1394_BUFFER_READY;
do_gettimeofday(&d->buffer_time[i]);
}
}
@@ -585,7 +615,7 @@
int next = d->next_buffer[i];
put_timestamp(ohci, d, next);
d->it_prg[i][d->last_used_cmd[i]].end.status = 0;
- d->buffer_status[i] = VIDEO1394_BUFFER_READY;
+ d->buffer_status[d->buffer_prg_assignment[i]] = VIDEO1394_BUFFER_READY;
}
}
@@ -595,11 +625,25 @@
wake_up_interruptible(&d->waitq);
}
+static void reprogram_dma_it_prg(struct dma_iso_ctx *d, int n, int buffer)
+{
+ struct it_dma_prg *it_prg = d->it_prg[n];
+ unsigned long buf = (unsigned long)d->dma.kvirt + buffer * d->buf_size;
+ int i;
+
+ d->buffer_prg_assignment[n] = buffer;
+ for (i=0;i<d->nb_cmd;i++) {
+ it_prg[i].end.address =
+ cpu_to_le32(dma_region_offset_to_bus(&d->dma,
+ (buf+i*d->packet_size) - (unsigned long)d->dma.kvirt));
+ }
+}
+
static void initialize_dma_it_prg(struct dma_iso_ctx *d, int n, int sync_tag)
{
struct it_dma_prg *it_prg = d->it_prg[n];
struct dma_prog_region *it_reg = &d->prg_reg[n];
- unsigned long buf = (unsigned long)d->dma.kvirt + n * d->buf_size;
+ unsigned long buf = (unsigned long)d->dma.kvirt;
int i;
d->last_used_cmd[n] = d->nb_cmd - 1;
for (i=0;i<d->nb_cmd;i++) {
@@ -796,7 +840,7 @@
if (cmd == VIDEO1394_IOC_LISTEN_CHANNEL) {
d = alloc_dma_iso_ctx(ohci, OHCI_ISO_RECEIVE,
- v.nb_buffers, v.buf_size,
+ v.nb_buffers + 1, v.buf_size,
v.channel, 0);
if (d == NULL) {
@@ -817,7 +861,7 @@
}
else {
d = alloc_dma_iso_ctx(ohci, OHCI_ISO_TRANSMIT,
- v.nb_buffers, v.buf_size,
+ v.nb_buffers + 1, v.buf_size,
v.channel, v.packet_size);
if (d == NULL) {
@@ -889,6 +933,7 @@
{
struct video1394_wait v;
struct dma_iso_ctx *d;
+ int next_prg;
if (copy_from_user(&v, argp, sizeof(v)))
return -EFAULT;
@@ -896,7 +941,7 @@
d = find_ctx(&ctx->context_list, OHCI_ISO_RECEIVE, v.channel);
if (d == NULL) return -EFAULT;
- if ((v.buffer<0) || (v.buffer>d->num_desc)) {
+ if ((v.buffer<0) || (v.buffer>=d->num_desc - 1)) {
PRINT(KERN_ERR, ohci->host->id,
"Buffer %d out of range",v.buffer);
return -EINVAL;
@@ -913,12 +958,14 @@
d->buffer_status[v.buffer]=VIDEO1394_BUFFER_QUEUED;
+ next_prg = (d->last_buffer + 1) % d->num_desc;
if (d->last_buffer>=0)
d->ir_prg[d->last_buffer][d->nb_cmd-1].branchAddress =
- cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer], 0)
+ cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[next_prg], 0)
& 0xfffffff0) | 0x1);
- d->last_buffer = v.buffer;
+ d->last_buffer = next_prg;
+ reprogram_dma_ir_prg(d, d->last_buffer, v.buffer, d->flags);
d->ir_prg[d->last_buffer][d->nb_cmd-1].branchAddress = 0;
@@ -930,7 +977,7 @@
/* Tell the controller where the first program is */
reg_write(ohci, d->cmdPtr,
- dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer], 0) | 0x1);
+ dma_prog_region_offset_to_bus(&d->prg_reg[d->last_buffer], 0) | 0x1);
/* Run IR context */
reg_write(ohci, d->ctrlSet, 0x8000);
@@ -951,7 +998,7 @@
{
struct video1394_wait v;
struct dma_iso_ctx *d;
- int i;
+ int i = 0;
if (copy_from_user(&v, argp, sizeof(v)))
return -EFAULT;
@@ -959,7 +1006,7 @@
d = find_ctx(&ctx->context_list, OHCI_ISO_RECEIVE, v.channel);
if (d == NULL) return -EFAULT;
- if ((v.buffer<0) || (v.buffer>d->num_desc)) {
+ if ((v.buffer<0) || (v.buffer>d->num_desc - 1)) {
PRINT(KERN_ERR, ohci->host->id,
"Buffer %d out of range",v.buffer);
return -EINVAL;
@@ -1005,9 +1052,9 @@
* Look ahead to see how many more buffers have been received
*/
i=0;
- while (d->buffer_status[(v.buffer+1)%d->num_desc]==
+ while (d->buffer_status[(v.buffer+1)%(d->num_desc - 1)]==
VIDEO1394_BUFFER_READY) {
- v.buffer=(v.buffer+1)%d->num_desc;
+ v.buffer=(v.buffer+1)%(d->num_desc - 1);
i++;
}
spin_unlock_irqrestore(&d->lock, flags);
@@ -1023,6 +1070,7 @@
struct video1394_wait v;
unsigned int *psizes = NULL;
struct dma_iso_ctx *d;
+ int next_prg;
if (copy_from_user(&v, argp, sizeof(v)))
return -EFAULT;
@@ -1030,7 +1078,7 @@
d = find_ctx(&ctx->context_list, OHCI_ISO_TRANSMIT, v.channel);
if (d == NULL) return -EFAULT;
- if ((v.buffer<0) || (v.buffer>d->num_desc)) {
+ if ((v.buffer<0) || (v.buffer>=d->num_desc - 1)) {
PRINT(KERN_ERR, ohci->host->id,
"Buffer %d out of range",v.buffer);
return -EINVAL;
@@ -1056,19 +1104,19 @@
spin_lock_irqsave(&d->lock,flags);
+ // last_buffer is last_prg
+ next_prg = (d->last_buffer + 1) % d->num_desc;
if (d->buffer_status[v.buffer]!=VIDEO1394_BUFFER_FREE) {
PRINT(KERN_ERR, ohci->host->id,
"Buffer %d is already used",v.buffer);
spin_unlock_irqrestore(&d->lock,flags);
- if (psizes)
- kfree(psizes);
+ kfree(psizes);
return -EBUSY;
}
if (d->flags & VIDEO1394_VARIABLE_PACKET_SIZE) {
initialize_dma_it_prg_var_packet_queue(
- d, v.buffer, psizes,
- ohci);
+ d, next_prg, psizes, ohci);
}
d->buffer_status[v.buffer]=VIDEO1394_BUFFER_QUEUED;
@@ -1076,16 +1124,17 @@
if (d->last_buffer >= 0) {
d->it_prg[d->last_buffer]
[ d->last_used_cmd[d->last_buffer] ].end.branchAddress =
- cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer],
+ cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[next_prg],
0) & 0xfffffff0) | 0x3);
d->it_prg[d->last_buffer]
[ d->last_used_cmd[d->last_buffer] ].begin.branchAddress =
- cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer],
+ cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[next_prg],
0) & 0xfffffff0) | 0x3);
- d->next_buffer[d->last_buffer] = v.buffer;
+ d->next_buffer[d->last_buffer] = (v.buffer + 1) % (d->num_desc - 1);
}
- d->last_buffer = v.buffer;
+ d->last_buffer = next_prg;
+ reprogram_dma_it_prg(d, d->last_buffer, v.buffer);
d->next_buffer[d->last_buffer] = -1;
d->it_prg[d->last_buffer][d->last_used_cmd[d->last_buffer]].end.branchAddress = 0;
@@ -1100,7 +1149,7 @@
/* Tell the controller where the first program is */
reg_write(ohci, d->cmdPtr,
- dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer], 0) | 0x3);
+ dma_prog_region_offset_to_bus(&d->prg_reg[next_prg], 0) | 0x3);
/* Run IT context */
reg_write(ohci, d->ctrlSet, 0x8000);
@@ -1116,9 +1165,7 @@
}
}
- if (psizes)
- kfree(psizes);
-
+ kfree(psizes);
return 0;
}
@@ -1133,7 +1180,7 @@
d = find_ctx(&ctx->context_list, OHCI_ISO_TRANSMIT, v.channel);
if (d == NULL) return -EFAULT;
- if ((v.buffer<0) || (v.buffer>d->num_desc)) {
+ if ((v.buffer<0) || (v.buffer>=d->num_desc-1)) {
PRINT(KERN_ERR, ohci->host->id,
"Buffer %d out of range",v.buffer);
return -EINVAL;
diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index d4233ee..276e1a5 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -587,7 +587,7 @@
init_mad(query->sa_query.mad, agent);
- query->sa_query.callback = ib_sa_path_rec_callback;
+ query->sa_query.callback = callback ? ib_sa_path_rec_callback : NULL;
query->sa_query.release = ib_sa_path_rec_release;
query->sa_query.port = port;
query->sa_query.mad->mad_hdr.method = IB_MGMT_METHOD_GET;
@@ -663,7 +663,7 @@
init_mad(query->sa_query.mad, agent);
- query->sa_query.callback = ib_sa_mcmember_rec_callback;
+ query->sa_query.callback = callback ? ib_sa_mcmember_rec_callback : NULL;
query->sa_query.release = ib_sa_mcmember_rec_release;
query->sa_query.port = port;
query->sa_query.mad->mad_hdr.method = method;
@@ -698,20 +698,21 @@
if (!query)
return;
- switch (mad_send_wc->status) {
- case IB_WC_SUCCESS:
- /* No callback -- already got recv */
- break;
- case IB_WC_RESP_TIMEOUT_ERR:
- query->callback(query, -ETIMEDOUT, NULL);
- break;
- case IB_WC_WR_FLUSH_ERR:
- query->callback(query, -EINTR, NULL);
- break;
- default:
- query->callback(query, -EIO, NULL);
- break;
- }
+ if (query->callback)
+ switch (mad_send_wc->status) {
+ case IB_WC_SUCCESS:
+ /* No callback -- already got recv */
+ break;
+ case IB_WC_RESP_TIMEOUT_ERR:
+ query->callback(query, -ETIMEDOUT, NULL);
+ break;
+ case IB_WC_WR_FLUSH_ERR:
+ query->callback(query, -EINTR, NULL);
+ break;
+ default:
+ query->callback(query, -EIO, NULL);
+ break;
+ }
dma_unmap_single(agent->device->dma_device,
pci_unmap_addr(query, mapping),
@@ -736,7 +737,7 @@
query = idr_find(&query_idr, mad_recv_wc->wc->wr_id);
spin_unlock_irqrestore(&idr_lock, flags);
- if (query) {
+ if (query && query->callback) {
if (mad_recv_wc->wc->status == IB_WC_SUCCESS)
query->callback(query,
mad_recv_wc->recv_buf.mad->mad_hdr.status ?
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 56b9c2f..9d912d6 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -499,6 +499,7 @@
static int ib_umad_close(struct inode *inode, struct file *filp)
{
struct ib_umad_file *file = filp->private_data;
+ struct ib_umad_packet *packet, *tmp;
int i;
for (i = 0; i < IB_UMAD_MAX_AGENTS; ++i)
@@ -507,6 +508,9 @@
ib_unregister_mad_agent(file->agent[i]);
}
+ list_for_each_entry_safe(packet, tmp, &file->recv_list, list)
+ kfree(packet);
+
kfree(file);
return 0;
diff --git a/drivers/infiniband/include/ib_sa.h b/drivers/infiniband/include/ib_sa.h
index f4f7477..0022228 100644
--- a/drivers/infiniband/include/ib_sa.h
+++ b/drivers/infiniband/include/ib_sa.h
@@ -147,7 +147,7 @@
/* reserved */
u8 sl;
u8 mtu_selector;
- enum ib_mtu mtu;
+ u8 mtu;
u8 rate_selector;
u8 rate;
u8 packet_life_time_selector;
@@ -180,7 +180,7 @@
u32 qkey;
u16 mlid;
u8 mtu_selector;
- enum ib_mtu mtu;
+ u8 mtu;
u8 traffic_class;
u16 pkey;
u8 rate_selector;
diff --git a/drivers/input/gameport/Kconfig b/drivers/input/gameport/Kconfig
index 6282f46..1d93f50 100644
--- a/drivers/input/gameport/Kconfig
+++ b/drivers/input/gameport/Kconfig
@@ -68,23 +68,3 @@
depends on PCI
endif
-
-# Yes, SOUND_GAMEPORT looks a bit odd. Yes, it ends up being turned on
-# in every .config. Please don't touch it. It is here to handle an
-# unusual dependency between GAMEPORT and sound drivers.
-#
-# Some sound drivers call gameport functions. If GAMEPORT is
-# not selected, empty stubs are provided for the functions and all is
-# well.
-# If GAMEPORT is built in, everything is fine.
-# If GAMEPORT is a module, however, it would need to be loaded for the
-# sound driver to be able to link properly. Therefore, the sound
-# driver must be a module as well in that case. Since there's no way
-# to express that directly in Kconfig, we use SOUND_GAMEPORT to
-# express it. SOUND_GAMEPORT boils down to "if GAMEPORT is 'm',
-# anything that depends on SOUND_GAMEPORT must be 'm' as well. if
-# GAMEPORT is 'y' or 'n', it can be anything".
-config SOUND_GAMEPORT
- tristate
- default m if GAMEPORT=m
- default y
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 7d7527f..627d343 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -422,7 +422,7 @@
joydev->nkey++;
}
- for (i = 0; i < BTN_JOYSTICK - BTN_MISC + 1; i++)
+ for (i = 0; i < BTN_JOYSTICK - BTN_MISC; i++)
if (test_bit(i + BTN_MISC, dev->keybit)) {
joydev->keymap[i] = joydev->nkey;
joydev->keypam[joydev->nkey] = i + BTN_MISC;
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index ff66ed4..af0446c 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -171,9 +171,9 @@
unsigned char set2;
} atkbd_scroll_keys[] = {
{ ATKBD_SCR_1, 0xc5 },
- { ATKBD_SCR_2, 0xa9 },
- { ATKBD_SCR_4, 0xb6 },
- { ATKBD_SCR_8, 0xa7 },
+ { ATKBD_SCR_2, 0x9d },
+ { ATKBD_SCR_4, 0xa4 },
+ { ATKBD_SCR_8, 0x9b },
{ ATKBD_SCR_CLICK, 0xe0 },
{ ATKBD_SCR_LEFT, 0xcb },
{ ATKBD_SCR_RIGHT, 0xd2 },
@@ -465,8 +465,10 @@
if (atkbd->softrepeat) return 0;
i = j = 0;
- while (i < 32 && period[i] < dev->rep[REP_PERIOD]) i++;
- while (j < 4 && delay[j] < dev->rep[REP_DELAY]) j++;
+ while (i < 31 && period[i] < dev->rep[REP_PERIOD])
+ i++;
+ while (j < 3 && delay[j] < dev->rep[REP_DELAY])
+ j++;
dev->rep[REP_PERIOD] = period[i];
dev->rep[REP_DELAY] = delay[j];
param[0] = i | (j << 5);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 1f85a97..42a9f7f 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -341,6 +341,8 @@
unsigned char param[4];
int version;
+ psmouse_reset(psmouse);
+
if (!(priv->i = alps_get_model(psmouse, &version)))
return -1;
@@ -395,7 +397,7 @@
}
if (param[0] & 0x04) {
- printk(KERN_INFO " Enabling hardware tapping\n");
+ printk(KERN_INFO "alps.c: Enabling hardware tapping\n");
if (alps_tap_mode(psmouse, 1))
printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
}
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index cd85095..019034b 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -518,13 +518,16 @@
/*
* First, we check if it's a mouse. It should send 0x00 or 0x03
* in case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer.
+ * Sunrex K8561 IR Keyboard/Mouse reports 0xff on second and subsequent
+ * ID queries, probably due to a firmware bug.
*/
param[0] = 0xa5;
if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETID))
return -1;
- if (param[0] != 0x00 && param[0] != 0x03 && param[0] != 0x04)
+ if (param[0] != 0x00 && param[0] != 0x03 &&
+ param[0] != 0x04 && param[0] != 0xff)
return -1;
/*
@@ -972,7 +975,7 @@
return -EINVAL;
if (!strncmp(val, "any", 3)) {
- *((unsigned int *)kp->arg) = -1UL;
+ *((unsigned int *)kp->arg) = -1U;
return 0;
}
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 69832f8..36c7212 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -143,39 +143,6 @@
return -1;
}
-static void print_ident(struct synaptics_data *priv)
-{
- printk(KERN_INFO "Synaptics Touchpad, model: %ld\n", SYN_ID_MODEL(priv->identity));
- printk(KERN_INFO " Firmware: %ld.%ld\n", SYN_ID_MAJOR(priv->identity),
- SYN_ID_MINOR(priv->identity));
- if (SYN_MODEL_ROT180(priv->model_id))
- printk(KERN_INFO " 180 degree mounted touchpad\n");
- if (SYN_MODEL_PORTRAIT(priv->model_id))
- printk(KERN_INFO " portrait touchpad\n");
- printk(KERN_INFO " Sensor: %ld\n", SYN_MODEL_SENSOR(priv->model_id));
- if (SYN_MODEL_NEWABS(priv->model_id))
- printk(KERN_INFO " new absolute packet format\n");
- if (SYN_MODEL_PEN(priv->model_id))
- printk(KERN_INFO " pen detection\n");
-
- if (SYN_CAP_EXTENDED(priv->capabilities)) {
- printk(KERN_INFO " Touchpad has extended capability bits\n");
- if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap))
- printk(KERN_INFO " -> %d multi-buttons, i.e. besides standard buttons\n",
- (int)(SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap)));
- if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities))
- printk(KERN_INFO " -> middle button\n");
- if (SYN_CAP_FOUR_BUTTON(priv->capabilities))
- printk(KERN_INFO " -> four buttons\n");
- if (SYN_CAP_MULTIFINGER(priv->capabilities))
- printk(KERN_INFO " -> multifinger detection\n");
- if (SYN_CAP_PALMDETECT(priv->capabilities))
- printk(KERN_INFO " -> palm detection\n");
- if (SYN_CAP_PASS_THROUGH(priv->capabilities))
- printk(KERN_INFO " -> pass-through port\n");
- }
-}
-
static int synaptics_query_hardware(struct psmouse *psmouse)
{
int retries = 0;
@@ -666,7 +633,11 @@
priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
- print_ident(priv);
+ printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx\n",
+ SYN_ID_MODEL(priv->identity),
+ SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
+ priv->model_id, priv->capabilities, priv->ext_cap);
+
set_input_params(&psmouse->dev, priv);
psmouse->protocol_handler = synaptics_process_byte;
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 564974c..96fb987 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -101,6 +101,7 @@
unsigned char ready, buffer, bufsiz;
unsigned char imexseq, impsseq;
enum mousedev_emul mode;
+ unsigned long last_buttons;
};
#define MOUSEDEV_SEQ_LEN 6
@@ -224,7 +225,7 @@
spin_lock_irqsave(&list->packet_lock, flags);
p = &list->packets[list->head];
- if (list->ready && p->buttons != packet->buttons) {
+ if (list->ready && p->buttons != mousedev->packet.buttons) {
unsigned int new_head = (list->head + 1) % PACKET_QUEUE_LEN;
if (new_head != list->tail) {
p = &list->packets[list->head = new_head];
@@ -249,10 +250,13 @@
p->dz += packet->dz;
p->buttons = mousedev->packet.buttons;
- list->ready = 1;
+ if (p->dx || p->dy || p->dz || p->buttons != list->last_buttons)
+ list->ready = 1;
spin_unlock_irqrestore(&list->packet_lock, flags);
- kill_fasync(&list->fasync, SIGIO, POLL_IN);
+
+ if (list->ready)
+ kill_fasync(&list->fasync, SIGIO, POLL_IN);
}
wake_up_interruptible(&mousedev->wait);
@@ -477,9 +481,10 @@
}
if (!p->dx && !p->dy && !p->dz) {
- if (list->tail == list->head)
+ if (list->tail == list->head) {
list->ready = 0;
- else
+ list->last_buttons = p->buttons;
+ } else
list->tail = (list->tail + 1) % PACKET_QUEUE_LEN;
}
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index f648678..0487ecb 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -88,9 +88,11 @@
};
/*
- * Some Fujitsu notebooks are ahving trouble with touhcpads if
+ * Some Fujitsu notebooks are having trouble with touchpads if
* active multiplexing mode is activated. Luckily they don't have
* external PS/2 ports so we can safely disable it.
+ * ... apparently some Toshibas don't like MUX mode either and
+ * die horrible death on reboot.
*/
static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
{
@@ -115,12 +117,26 @@
},
},
{
+ .ident = "Fujitsu Lifebook S6230",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S6230"),
+ },
+ },
+ {
.ident = "Fujitsu T70H",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "FMVLT70H"),
},
},
+ {
+ .ident = "Toshiba P10",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"),
+ },
+ },
{ }
};
@@ -215,11 +231,15 @@
static void i8042_pnp_exit(void)
{
- if (i8042_pnp_kbd_registered)
+ if (i8042_pnp_kbd_registered) {
+ i8042_pnp_kbd_registered = 0;
pnp_unregister_driver(&i8042_pnp_kbd_driver);
+ }
- if (i8042_pnp_aux_registered)
+ if (i8042_pnp_aux_registered) {
+ i8042_pnp_aux_registered = 0;
pnp_unregister_driver(&i8042_pnp_aux_driver);
+ }
}
static int i8042_pnp_init(void)
@@ -227,7 +247,7 @@
int result_kbd, result_aux;
if (i8042_nopnp) {
- printk("i8042: PNP detection disabled\n");
+ printk(KERN_INFO "i8042: PNP detection disabled\n");
return 0;
}
@@ -241,7 +261,7 @@
#if defined(__ia64__)
return -ENODEV;
#else
- printk(KERN_WARNING "PNP: No PS/2 controller found. Probing ports directly.\n");
+ printk(KERN_INFO "PNP: No PS/2 controller found. Probing ports directly.\n");
return 0;
#endif
}
@@ -265,7 +285,7 @@
i8042_pnp_kbd_irq = i8042_kbd_irq;
}
- if (result_aux > 0 && !i8042_pnp_aux_irq) {
+ if (!i8042_pnp_aux_irq) {
printk(KERN_WARNING "PNP: PS/2 controller doesn't have AUX irq; using default %#x\n", i8042_aux_irq);
i8042_pnp_aux_irq = i8042_aux_irq;
}
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 8e63e46..5900de3 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -698,6 +698,26 @@
i8042_interrupt(0, NULL, NULL);
}
+static int i8042_ctl_test(void)
+{
+ unsigned char param;
+
+ if (!i8042_reset)
+ return 0;
+
+ if (i8042_command(¶m, I8042_CMD_CTL_TEST)) {
+ printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+ return -1;
+ }
+
+ if (param != I8042_RET_CTL_TEST) {
+ printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
+ param, I8042_RET_CTL_TEST);
+ return -1;
+ }
+
+ return 0;
+}
/*
* i8042_controller init initializes the i8042 controller, and,
@@ -719,21 +739,8 @@
return -1;
}
- if (i8042_reset) {
-
- unsigned char param;
-
- if (i8042_command(¶m, I8042_CMD_CTL_TEST)) {
- printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
- return -1;
- }
-
- if (param != I8042_RET_CTL_TEST) {
- printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
- param, I8042_RET_CTL_TEST);
- return -1;
- }
- }
+ if (i8042_ctl_test())
+ return -1;
/*
* Save the CTR for restoral on unload / reboot.
@@ -802,15 +809,11 @@
*/
static void i8042_controller_reset(void)
{
- unsigned char param;
-
/*
* Reset the controller if requested.
*/
- if (i8042_reset)
- if (i8042_command(¶m, I8042_CMD_CTL_TEST))
- printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n");
+ i8042_ctl_test();
/*
* Disable MUX mode if present.
@@ -922,8 +925,11 @@
if (level != RESUME_ENABLE)
return 0;
- if (i8042_controller_init()) {
- printk(KERN_ERR "i8042: resume failed\n");
+ if (i8042_ctl_test())
+ return -1;
+
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+ printk(KERN_ERR "i8042: Can't write CTR\n");
return -1;
}
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 3313e2d..0beacb7 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -388,6 +388,24 @@
return sprintf(buf, "%02x\n", serio->id.extra);
}
+static DEVICE_ATTR(type, S_IRUGO, serio_show_id_type, NULL);
+static DEVICE_ATTR(proto, S_IRUGO, serio_show_id_proto, NULL);
+static DEVICE_ATTR(id, S_IRUGO, serio_show_id_id, NULL);
+static DEVICE_ATTR(extra, S_IRUGO, serio_show_id_extra, NULL);
+
+static struct attribute *serio_device_id_attrs[] = {
+ &dev_attr_type.attr,
+ &dev_attr_proto.attr,
+ &dev_attr_id.attr,
+ &dev_attr_extra.attr,
+ NULL
+};
+
+static struct attribute_group serio_id_attr_group = {
+ .name = "id",
+ .attrs = serio_device_id_attrs,
+};
+
static ssize_t serio_rebind_driver(struct device *dev, const char *buf, size_t count)
{
struct serio *serio = to_serio_port(dev);
@@ -444,10 +462,6 @@
static struct device_attribute serio_device_attrs[] = {
__ATTR(description, S_IRUGO, serio_show_description, NULL),
- __ATTR(id_type, S_IRUGO, serio_show_id_type, NULL),
- __ATTR(id_proto, S_IRUGO, serio_show_id_proto, NULL),
- __ATTR(id_id, S_IRUGO, serio_show_id_id, NULL),
- __ATTR(id_extra, S_IRUGO, serio_show_id_extra, NULL),
__ATTR(drvctl, S_IWUSR, NULL, serio_rebind_driver),
__ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode),
__ATTR_NULL
@@ -498,6 +512,7 @@
if (serio->start)
serio->start(serio);
device_add(&serio->dev);
+ sysfs_create_group(&serio->dev.kobj, &serio_id_attr_group);
serio->registered = 1;
}
@@ -526,6 +541,7 @@
}
if (serio->registered) {
+ sysfs_remove_group(&serio->dev.kobj, &serio_id_attr_group);
device_del(&serio->dev);
list_del_init(&serio->node);
serio->registered = 0;
@@ -779,7 +795,6 @@
struct serio *serio = to_serio_port(dev);
if (!serio->drv || !serio->drv->reconnect || serio->drv->reconnect(serio)) {
- serio_disconnect_port(serio);
/*
* Driver re-probing can take a while, so better let kseriod
* deal with it.
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index 22f7368..f6b8522 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -27,11 +27,15 @@
MODULE_ALIAS_LDISC(N_MOUSE);
#define SERPORT_BUSY 1
+#define SERPORT_ACTIVE 2
+#define SERPORT_DEAD 3
struct serport {
struct tty_struct *tty;
wait_queue_head_t wait;
struct serio *serio;
+ struct serio_device_id id;
+ spinlock_t lock;
unsigned long flags;
};
@@ -45,11 +49,29 @@
return -(serport->tty->driver->write(serport->tty, &data, 1) != 1);
}
+static int serport_serio_open(struct serio *serio)
+{
+ struct serport *serport = serio->port_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&serport->lock, flags);
+ set_bit(SERPORT_ACTIVE, &serport->flags);
+ spin_unlock_irqrestore(&serport->lock, flags);
+
+ return 0;
+}
+
+
static void serport_serio_close(struct serio *serio)
{
struct serport *serport = serio->port_data;
+ unsigned long flags;
- serport->serio->id.type = 0;
+ spin_lock_irqsave(&serport->lock, flags);
+ clear_bit(SERPORT_ACTIVE, &serport->flags);
+ set_bit(SERPORT_DEAD, &serport->flags);
+ spin_unlock_irqrestore(&serport->lock, flags);
+
wake_up_interruptible(&serport->wait);
}
@@ -61,36 +83,21 @@
static int serport_ldisc_open(struct tty_struct *tty)
{
struct serport *serport;
- struct serio *serio;
- char name[64];
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- serport = kmalloc(sizeof(struct serport), GFP_KERNEL);
- serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
- if (unlikely(!serport || !serio)) {
- kfree(serport);
- kfree(serio);
+ serport = kcalloc(1, sizeof(struct serport), GFP_KERNEL);
+ if (!serport)
return -ENOMEM;
- }
- memset(serport, 0, sizeof(struct serport));
- serport->serio = serio;
- set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
serport->tty = tty;
- tty->disc_data = serport;
-
- memset(serio, 0, sizeof(struct serio));
- strlcpy(serio->name, "Serial port", sizeof(serio->name));
- snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty, name));
- serio->id.type = SERIO_RS232;
- serio->write = serport_serio_write;
- serio->close = serport_serio_close;
- serio->port_data = serport;
-
+ spin_lock_init(&serport->lock);
init_waitqueue_head(&serport->wait);
+ tty->disc_data = serport;
+ set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+
return 0;
}
@@ -100,7 +107,8 @@
static void serport_ldisc_close(struct tty_struct *tty)
{
- struct serport *serport = (struct serport*) tty->disc_data;
+ struct serport *serport = (struct serport *) tty->disc_data;
+
kfree(serport);
}
@@ -116,9 +124,19 @@
static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *cp, char *fp, int count)
{
struct serport *serport = (struct serport*) tty->disc_data;
+ unsigned long flags;
int i;
+
+ spin_lock_irqsave(&serport->lock, flags);
+
+ if (!test_bit(SERPORT_ACTIVE, &serport->flags))
+ goto out;
+
for (i = 0; i < count; i++)
serio_interrupt(serport->serio, cp[i], 0, NULL);
+
+out:
+ spin_unlock_irqrestore(&serport->lock, flags);
}
/*
@@ -141,16 +159,33 @@
static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, unsigned char __user * buf, size_t nr)
{
struct serport *serport = (struct serport*) tty->disc_data;
+ struct serio *serio;
char name[64];
if (test_and_set_bit(SERPORT_BUSY, &serport->flags))
return -EBUSY;
+ serport->serio = serio = kcalloc(1, sizeof(struct serio), GFP_KERNEL);
+ if (!serio)
+ return -ENOMEM;
+
+ strlcpy(serio->name, "Serial port", sizeof(serio->name));
+ snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty, name));
+ serio->id = serport->id;
+ serio->id.type = SERIO_RS232;
+ serio->write = serport_serio_write;
+ serio->open = serport_serio_open;
+ serio->close = serport_serio_close;
+ serio->port_data = serport;
+
serio_register_port(serport->serio);
printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty, name));
- wait_event_interruptible(serport->wait, !serport->serio->id.type);
- serio_unregister_port(serport->serio);
+ wait_event_interruptible(serport->wait, test_bit(SERPORT_DEAD, &serport->flags));
+ serio_unregister_port(serport->serio);
+ serport->serio = NULL;
+
+ clear_bit(SERPORT_DEAD, &serport->flags);
clear_bit(SERPORT_BUSY, &serport->flags);
return 0;
@@ -163,16 +198,15 @@
static int serport_ldisc_ioctl(struct tty_struct * tty, struct file * file, unsigned int cmd, unsigned long arg)
{
struct serport *serport = (struct serport*) tty->disc_data;
- struct serio *serio = serport->serio;
unsigned long type;
if (cmd == SPIOCSTYPE) {
if (get_user(type, (unsigned long __user *) arg))
return -EFAULT;
- serio->id.proto = type & 0x000000ff;
- serio->id.id = (type & 0x0000ff00) >> 8;
- serio->id.extra = (type & 0x00ff0000) >> 16;
+ serport->id.proto = type & 0x000000ff;
+ serport->id.id = (type & 0x0000ff00) >> 8;
+ serport->id.extra = (type & 0x00ff0000) >> 16;
return 0;
}
@@ -182,9 +216,13 @@
static void serport_ldisc_write_wakeup(struct tty_struct * tty)
{
- struct serport *sp = (struct serport *) tty->disc_data;
+ struct serport *serport = (struct serport *) tty->disc_data;
+ unsigned long flags;
- serio_drv_write_wakeup(sp->serio);
+ spin_lock_irqsave(&serport->lock, flags);
+ if (test_bit(SERPORT_ACTIVE, &serport->flags))
+ serio_drv_write_wakeup(serport->serio);
+ spin_unlock_irqrestore(&serport->lock, flags);
}
/*
diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c
index c9d0a15..53a27e4 100644
--- a/drivers/input/touchscreen/gunze.c
+++ b/drivers/input/touchscreen/gunze.c
@@ -68,8 +68,7 @@
if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' ||
(gunze->data[0] != 'T' && gunze->data[0] != 'R')) {
- gunze->data[10] = 0;
- printk(KERN_WARNING "gunze.c: bad packet: >%s<\n", gunze->data);
+ printk(KERN_WARNING "gunze.c: bad packet: >%.*s<\n", GUNZE_MAX_LENGTH, gunze->data);
return;
}
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index e0ac63e..d09308f 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -39,15 +39,16 @@
#define MANUAL_MASK 0xe0
#define AUTO_MASK 0x20
-static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, cpu, gpu */
-static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, cpu, gpu */
+static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */
+static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */
static u8 MANUAL_MODE[2] = {0x5c, 0x5d};
static u8 REM_CONTROL[2] = {0x00, 0x40};
static u8 FAN_SPEED[2] = {0x28, 0x2a};
static u8 FAN_SPD_SET[2] = {0x30, 0x31};
-static u8 default_limits_local[3] = {70, 50, 70}; /* local, cpu, gpu */
-static u8 default_limits_chip[3] = {80, 65, 80}; /* local, cpu, gpu */
+static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */
+static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */
+static char *sensor_location[3] = {NULL, NULL, NULL};
static int limit_adjust = 0;
static int fan_speed = -1;
@@ -58,7 +59,7 @@
MODULE_LICENSE("GPL");
module_param(limit_adjust, int, 0644);
-MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 cpu, 70 gpu) "
+MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 sensor1, 70 sensor2) "
"by N degrees.");
module_param(fan_speed, int, 0644);
@@ -213,10 +214,10 @@
if (th->last_speed[fan] != speed) {
if (speed == -1)
printk(KERN_DEBUG "adt746x: Setting speed to automatic "
- "for %s fan.\n", fan?"GPU":"CPU");
+ "for %s fan.\n", sensor_location[fan+1]);
else
printk(KERN_DEBUG "adt746x: Setting speed to %d "
- "for %s fan.\n", speed, fan?"GPU":"CPU");
+ "for %s fan.\n", speed, sensor_location[fan+1]);
} else
return;
@@ -300,11 +301,11 @@
printk(KERN_DEBUG "adt746x: setting fans speed to %d "
"(limit exceeded by %d on %s) \n",
new_speed, var,
- fan_number?"GPU/pwr":"CPU");
+ sensor_location[fan_number+1]);
write_both_fan_speed(th, new_speed);
th->last_var[fan_number] = var;
} else if (var < -2) {
- /* don't stop fan if GPU/power is cold and CPU is not
+ /* don't stop fan if sensor2 is cold and sensor1 is not
* so cold (lastvar >= -1) */
if (i == 2 && lastvar < -1) {
if (th->last_speed[fan_number] != 0)
@@ -318,7 +319,7 @@
if (started)
return; /* we don't want to re-stop the fan
- * if CPU is heating and GPU/power is not */
+ * if sensor1 is heating and sensor2 is not */
}
}
@@ -353,7 +354,7 @@
static void set_limit(struct thermostat *th, int i)
{
- /* Set CPU limit higher to avoid powerdowns */
+ /* Set sensor1 limit higher to avoid powerdowns */
th->limits[i] = default_limits_chip[i] + limit_adjust;
write_reg(th, LIMIT_REG[i], th->limits[i]);
@@ -461,6 +462,12 @@
return sprintf(buf, "%d\n", data); \
}
+#define BUILD_SHOW_FUNC_STR(name, data) \
+static ssize_t show_##name(struct device *dev, char *buf) \
+{ \
+ return sprintf(buf, "%s\n", data); \
+}
+
#define BUILD_SHOW_FUNC_FAN(name, data) \
static ssize_t show_##name(struct device *dev, char *buf) \
{ \
@@ -476,7 +483,7 @@
int val; \
int i; \
val = simple_strtol(buf, NULL, 10); \
- printk(KERN_INFO "Adjusting limits by %d°C\n", val); \
+ printk(KERN_INFO "Adjusting limits by %d degrees\n", val); \
limit_adjust = val; \
for (i=0; i < 3; i++) \
set_limit(thermostat, i); \
@@ -495,35 +502,41 @@
return n; \
}
-BUILD_SHOW_FUNC_INT(cpu_temperature, (read_reg(thermostat, TEMP_REG[1])))
-BUILD_SHOW_FUNC_INT(gpu_temperature, (read_reg(thermostat, TEMP_REG[2])))
-BUILD_SHOW_FUNC_INT(cpu_limit, thermostat->limits[1])
-BUILD_SHOW_FUNC_INT(gpu_limit, thermostat->limits[2])
+BUILD_SHOW_FUNC_INT(sensor1_temperature, (read_reg(thermostat, TEMP_REG[1])))
+BUILD_SHOW_FUNC_INT(sensor2_temperature, (read_reg(thermostat, TEMP_REG[2])))
+BUILD_SHOW_FUNC_INT(sensor1_limit, thermostat->limits[1])
+BUILD_SHOW_FUNC_INT(sensor2_limit, thermostat->limits[2])
+BUILD_SHOW_FUNC_STR(sensor1_location, sensor_location[1])
+BUILD_SHOW_FUNC_STR(sensor2_location, sensor_location[2])
BUILD_SHOW_FUNC_INT(specified_fan_speed, fan_speed)
-BUILD_SHOW_FUNC_FAN(cpu_fan_speed, 0)
-BUILD_SHOW_FUNC_FAN(gpu_fan_speed, 1)
+BUILD_SHOW_FUNC_FAN(sensor1_fan_speed, 0)
+BUILD_SHOW_FUNC_FAN(sensor2_fan_speed, 1)
BUILD_STORE_FUNC_INT(specified_fan_speed,fan_speed)
BUILD_SHOW_FUNC_INT(limit_adjust, limit_adjust)
BUILD_STORE_FUNC_DEG(limit_adjust, thermostat)
-static DEVICE_ATTR(cpu_temperature, S_IRUGO,
- show_cpu_temperature,NULL);
-static DEVICE_ATTR(gpu_temperature, S_IRUGO,
- show_gpu_temperature,NULL);
-static DEVICE_ATTR(cpu_limit, S_IRUGO,
- show_cpu_limit, NULL);
-static DEVICE_ATTR(gpu_limit, S_IRUGO,
- show_gpu_limit, NULL);
+static DEVICE_ATTR(sensor1_temperature, S_IRUGO,
+ show_sensor1_temperature,NULL);
+static DEVICE_ATTR(sensor2_temperature, S_IRUGO,
+ show_sensor2_temperature,NULL);
+static DEVICE_ATTR(sensor1_limit, S_IRUGO,
+ show_sensor1_limit, NULL);
+static DEVICE_ATTR(sensor2_limit, S_IRUGO,
+ show_sensor2_limit, NULL);
+static DEVICE_ATTR(sensor1_location, S_IRUGO,
+ show_sensor1_location, NULL);
+static DEVICE_ATTR(sensor2_location, S_IRUGO,
+ show_sensor2_location, NULL);
static DEVICE_ATTR(specified_fan_speed, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
show_specified_fan_speed,store_specified_fan_speed);
-static DEVICE_ATTR(cpu_fan_speed, S_IRUGO,
- show_cpu_fan_speed, NULL);
-static DEVICE_ATTR(gpu_fan_speed, S_IRUGO,
- show_gpu_fan_speed, NULL);
+static DEVICE_ATTR(sensor1_fan_speed, S_IRUGO,
+ show_sensor1_fan_speed, NULL);
+static DEVICE_ATTR(sensor2_fan_speed, S_IRUGO,
+ show_sensor2_fan_speed, NULL);
static DEVICE_ATTR(limit_adjust, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
show_limit_adjust, store_limit_adjust);
@@ -534,6 +547,7 @@
{
struct device_node* np;
u32 *prop;
+ int i = 0, offset = 0;
np = of_find_node_by_name(NULL, "fan");
if (!np)
@@ -545,6 +559,12 @@
else
return -ENODEV;
+ prop = (u32 *)get_property(np, "hwsensor-params-version", NULL);
+ printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop,
+ (*prop == 1)?"":"un");
+ if (*prop != 1)
+ return -ENODEV;
+
prop = (u32 *)get_property(np, "reg", NULL);
if (!prop)
return -ENODEV;
@@ -563,6 +583,23 @@
"limit_adjust: %d, fan_speed: %d\n",
therm_bus, therm_address, limit_adjust, fan_speed);
+ if (get_property(np, "hwsensor-location", NULL)) {
+ for (i = 0; i < 3; i++) {
+ sensor_location[i] = get_property(np,
+ "hwsensor-location", NULL) + offset;
+
+ if (sensor_location[i] == NULL)
+ sensor_location[i] = "";
+
+ printk(KERN_INFO "sensor %d: %s\n", i, sensor_location[i]);
+ offset += strlen(sensor_location[i]) + 1;
+ }
+ } else {
+ sensor_location[0] = "?";
+ sensor_location[1] = "?";
+ sensor_location[2] = "?";
+ }
+
of_dev = of_platform_device_create(np, "temperatures");
if (of_dev == NULL) {
@@ -570,15 +607,17 @@
return -ENODEV;
}
- device_create_file(&of_dev->dev, &dev_attr_cpu_temperature);
- device_create_file(&of_dev->dev, &dev_attr_gpu_temperature);
- device_create_file(&of_dev->dev, &dev_attr_cpu_limit);
- device_create_file(&of_dev->dev, &dev_attr_gpu_limit);
+ device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature);
+ device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature);
+ device_create_file(&of_dev->dev, &dev_attr_sensor1_limit);
+ device_create_file(&of_dev->dev, &dev_attr_sensor2_limit);
+ device_create_file(&of_dev->dev, &dev_attr_sensor1_location);
+ device_create_file(&of_dev->dev, &dev_attr_sensor2_location);
device_create_file(&of_dev->dev, &dev_attr_limit_adjust);
device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed);
- device_create_file(&of_dev->dev, &dev_attr_cpu_fan_speed);
+ device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
if(therm_type == ADT7460)
- device_create_file(&of_dev->dev, &dev_attr_gpu_fan_speed);
+ device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
#ifndef CONFIG_I2C_KEYWEST
request_module("i2c-keywest");
@@ -591,17 +630,19 @@
thermostat_exit(void)
{
if (of_dev) {
- device_remove_file(&of_dev->dev, &dev_attr_cpu_temperature);
- device_remove_file(&of_dev->dev, &dev_attr_gpu_temperature);
- device_remove_file(&of_dev->dev, &dev_attr_cpu_limit);
- device_remove_file(&of_dev->dev, &dev_attr_gpu_limit);
+ device_remove_file(&of_dev->dev, &dev_attr_sensor1_temperature);
+ device_remove_file(&of_dev->dev, &dev_attr_sensor2_temperature);
+ device_remove_file(&of_dev->dev, &dev_attr_sensor1_limit);
+ device_remove_file(&of_dev->dev, &dev_attr_sensor2_limit);
+ device_remove_file(&of_dev->dev, &dev_attr_sensor1_location);
+ device_remove_file(&of_dev->dev, &dev_attr_sensor2_location);
device_remove_file(&of_dev->dev, &dev_attr_limit_adjust);
device_remove_file(&of_dev->dev, &dev_attr_specified_fan_speed);
- device_remove_file(&of_dev->dev, &dev_attr_cpu_fan_speed);
+ device_remove_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
if(therm_type == ADT7460)
device_remove_file(&of_dev->dev,
- &dev_attr_gpu_fan_speed);
+ &dev_attr_sensor2_fan_speed);
of_device_unregister(of_dev);
}
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index e654aa5..bb9f404 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -2421,7 +2421,7 @@
/* Re-enable local CPU interrupts */
local_irq_enable();
- mdelay(100);
+ mdelay(10);
preempt_enable();
/* Re-enable clock spreading on some machines */
@@ -2549,7 +2549,9 @@
return ret;
}
- printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
+ /* Stop environment and ADB interrupts */
+ pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
+ pmu_wait_complete(&req);
/* Tell PMU what events will wake us up */
pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_CLR_WAKEUP_EVENTS,
@@ -2611,8 +2613,6 @@
pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
pmu_wait_complete(&req);
- printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
-
pmac_wakeup_devices();
return 0;
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 161e9aa..b1941b8 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -269,9 +269,8 @@
* split it.
*/
struct bio_pair *bp;
- bp = bio_split(bio, bio_split_pool,
- (bio->bi_sector + (bio->bi_size >> 9) -
- (tmp_dev->offset + tmp_dev->size))<<1);
+ bp = bio_split(bio, bio_split_pool,
+ ((tmp_dev->offset + tmp_dev->size)<<1) - bio->bi_sector);
if (linear_make_request(q, &bp->bio1))
generic_make_request(&bp->bio1);
if (linear_make_request(q, &bp->bio2))
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 4e4bfde..2ae2d70 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -462,10 +462,6 @@
}
memset(conf->multipaths, 0, sizeof(struct multipath_info)*mddev->raid_disks);
- mddev->queue->unplug_fn = multipath_unplug;
-
- mddev->queue->issue_flush_fn = multipath_issue_flush;
-
conf->working_disks = 0;
ITERATE_RDEV(mddev,rdev,tmp) {
disk_idx = rdev->raid_disk;
@@ -528,6 +524,10 @@
* Ok, everything is just fine now
*/
mddev->array_size = mddev->size;
+
+ mddev->queue->unplug_fn = multipath_unplug;
+ mddev->queue->issue_flush_fn = multipath_issue_flush;
+
return 0;
out_free_conf:
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 83380b5..1db5de5 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1197,10 +1197,6 @@
if (!conf->r1bio_pool)
goto out_no_mem;
- mddev->queue->unplug_fn = raid1_unplug;
-
- mddev->queue->issue_flush_fn = raid1_issue_flush;
-
ITERATE_RDEV(mddev, rdev, tmp) {
disk_idx = rdev->raid_disk;
if (disk_idx >= mddev->raid_disks
@@ -1282,6 +1278,9 @@
*/
mddev->array_size = mddev->size;
+ mddev->queue->unplug_fn = raid1_unplug;
+ mddev->queue->issue_flush_fn = raid1_issue_flush;
+
return 0;
out_no_mem:
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index e9dc287..3c37be6 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1639,9 +1639,6 @@
mdname(mddev));
goto out_free_conf;
}
- mddev->queue->unplug_fn = raid10_unplug;
-
- mddev->queue->issue_flush_fn = raid10_issue_flush;
ITERATE_RDEV(mddev, rdev, tmp) {
disk_idx = rdev->raid_disk;
@@ -1713,6 +1710,9 @@
mddev->array_size = size/2;
mddev->resync_max_sectors = size;
+ mddev->queue->unplug_fn = raid10_unplug;
+ mddev->queue->issue_flush_fn = raid10_issue_flush;
+
/* Calculate max read-ahead size.
* We need to readahead at least twice a whole stripe....
* maybe...
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index e96e2a1..3cb11ac 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1620,9 +1620,6 @@
atomic_set(&conf->active_stripes, 0);
atomic_set(&conf->preread_active_stripes, 0);
- mddev->queue->unplug_fn = raid5_unplug_device;
- mddev->queue->issue_flush_fn = raid5_issue_flush;
-
PRINTK("raid5: run(%s) called.\n", mdname(mddev));
ITERATE_RDEV(mddev,rdev,tmp) {
@@ -1728,6 +1725,10 @@
}
/* Ok, everything is just fine now */
+
+ mddev->queue->unplug_fn = raid5_unplug_device;
+ mddev->queue->issue_flush_fn = raid5_issue_flush;
+
mddev->array_size = mddev->size * (mddev->raid_disks - 1);
return 0;
abort:
diff --git a/drivers/md/raid6main.c b/drivers/md/raid6main.c
index 8a33f35..908edd7 100644
--- a/drivers/md/raid6main.c
+++ b/drivers/md/raid6main.c
@@ -1779,9 +1779,6 @@
atomic_set(&conf->active_stripes, 0);
atomic_set(&conf->preread_active_stripes, 0);
- mddev->queue->unplug_fn = raid6_unplug_device;
- mddev->queue->issue_flush_fn = raid6_issue_flush;
-
PRINTK("raid6: run(%s) called.\n", mdname(mddev));
ITERATE_RDEV(mddev,rdev,tmp) {
@@ -1895,6 +1892,9 @@
/* Ok, everything is just fine now */
mddev->array_size = mddev->size * (mddev->raid_disks - 2);
+
+ mddev->queue->unplug_fn = raid6_unplug_device;
+ mddev->queue->issue_flush_fn = raid6_issue_flush;
return 0;
abort:
if (conf) {
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 9f6c19a..50e8b86 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -23,9 +23,9 @@
LIST_HEAD(saa7146_devices);
DECLARE_MUTEX(saa7146_devices_lock);
-static int saa7146_num = 0;
+static int saa7146_num;
-unsigned int saa7146_debug = 0;
+unsigned int saa7146_debug;
module_param(saa7146_debug, int, 0644);
MODULE_PARM_DESC(saa7146_debug, "debug level (default: 0)");
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index 883ec08..4983e1b 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -33,7 +33,7 @@
source "drivers/media/dvb/cinergyT2/Kconfig"
comment "Supported FlexCopII (B2C2) Adapters"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && (PCI || USB)
source "drivers/media/dvb/b2c2/Kconfig"
comment "Supported BT878 Adapters"
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 5259690..99bd675 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -1,3 +1,40 @@
+config DVB_B2C2_FLEXCOP
+ tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
+ depends on DVB_CORE
+ select DVB_STV0299
+ select DVB_MT352
+ select DVB_MT312
+ select DVB_NXT2002
+ select DVB_STV0297
+ help
+ Support for the digital TV receiver chip made by B2C2 Inc. included in
+ Technisats PCI cards and USB boxes.
+
+ Say Y if you own such a device and want to use it.
+
+config DVB_B2C2_FLEXCOP_PCI
+ tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI"
+ depends on DVB_B2C2_FLEXCOP && PCI
+ help
+ Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2.
+
+ Say Y if you own such a device and want to use it.
+
+config DVB_B2C2_FLEXCOP_USB
+ tristate "Technisat/B2C2 Air/Sky/Cable2PC USB"
+ depends on DVB_B2C2_FLEXCOP && USB
+ help
+ Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2,
+
+ Say Y if you own such a device and want to use it.
+
+config DVB_B2C2_FLEXCOP_DEBUG
+ bool "Enable debug for the B2C2 FlexCop drivers"
+ depends on DVB_B2C2_FLEXCOP
+ help
+ Say Y if you want to enable the module option to control debug messages
+ of all B2C2 FlexCop drivers.
+
config DVB_B2C2_SKYSTAR
tristate "B2C2/Technisat Air/Sky/CableStar 2 PCI"
depends on DVB_CORE && PCI
@@ -11,16 +48,3 @@
for the B2C2/BBTI Air2PC-ATSC card.
Say Y if you own such a device and want to use it.
-
-config DVB_B2C2_USB
- tristate "B2C2/Technisat Air/Sky/Cable2PC USB"
- depends on DVB_CORE && USB && EXPERIMENTAL
- select DVB_STV0299
- select DVB_MT352
- help
- Support for the Air/Sky/Cable2PC USB DVB device by B2C2. Currently
- the does nothing, but providing basic function for the used usb
- protocol.
-
- Say Y if you own such a device and want to use it.
-
diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile
index 9fb1247..7703812 100644
--- a/drivers/media/dvb/b2c2/Makefile
+++ b/drivers/media/dvb/b2c2/Makefile
@@ -1,6 +1,14 @@
-obj-b2c2-usb = b2c2-usb-core.o b2c2-common.o
+b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \
+ flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o \
+ flexcop-dma.o
+obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o
+
+b2c2-flexcop-pci-objs = flexcop-pci.o
+obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o
+
+b2c2-flexcop-usb-objs = flexcop-usb.o
+obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o
obj-$(CONFIG_DVB_B2C2_SKYSTAR) += skystar2.o
-obj-$(CONFIG_DVB_B2C2_USB) + = b2c2-usb.o
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/b2c2/b2c2-common.c b/drivers/media/dvb/b2c2/b2c2-common.c
deleted file mode 100644
index 000d60c..0000000
--- a/drivers/media/dvb/b2c2/b2c2-common.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * b2c2-common.c - common methods for the B2C2/Technisat SkyStar2 PCI DVB card and
- * for the B2C2/Technisat Sky/Cable/AirStar USB devices
- * based on the FlexCopII/FlexCopIII by B2C2, Inc.
- *
- * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
- *
- * FIX: DISEQC Tone Burst in flexcop_diseqc_ioctl()
- * FIX: FULL soft DiSEqC for skystar2 (FlexCopII rev 130) VP310 equipped
- * Vincenzo Di Massa, hawk.it at tiscalinet.it
- *
- * Converted to Linux coding style
- * Misc reorganization, polishing, restyling
- * Roberto Ragusa, r.ragusa at libero.it
- *
- * Added hardware filtering support,
- * Niklas Peinecke, peinecke at gdv.uni-hannover.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- */
-#include "stv0299.h"
-#include "mt352.h"
-#include "mt312.h"
-
-static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
-{
- u8 aclk = 0;
- u8 bclk = 0;
-
- if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
- else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
- else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
- else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
- else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
- else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
-
- stv0299_writereg (fe, 0x13, aclk);
- stv0299_writereg (fe, 0x14, bclk);
- stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
- stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
- stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
-
- return 0;
-}
-
-static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
-{
- u8 buf[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-// struct adapter* adapter = (struct adapter*) fe->dvb->priv;
-
- div = params->frequency / 125;
-
- buf[0] = (div >> 8) & 0x7f;
- buf[1] = div & 0xff;
- buf[2] = 0x84; // 0xC4
- buf[3] = 0x08;
-
- if (params->frequency < 1500000) buf[3] |= 0x10;
-
-// if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO;
- return 0;
-}
-
-static u8 samsung_tbmu24112_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x30,
- 0x03, 0x00,
- 0x04, 0x7D,
- 0x05, 0x35,
- 0x06, 0x02,
- 0x07, 0x00,
- 0x08, 0xC3,
- 0x0C, 0x00,
- 0x0D, 0x81,
- 0x0E, 0x23,
- 0x0F, 0x12,
- 0x10, 0x7E,
- 0x11, 0x84,
- 0x12, 0xB9,
- 0x13, 0x88,
- 0x14, 0x89,
- 0x15, 0xC9,
- 0x16, 0x00,
- 0x17, 0x5C,
- 0x18, 0x00,
- 0x19, 0x00,
- 0x1A, 0x00,
- 0x1C, 0x00,
- 0x1D, 0x00,
- 0x1E, 0x00,
- 0x1F, 0x3A,
- 0x20, 0x2E,
- 0x21, 0x80,
- 0x22, 0xFF,
- 0x23, 0xC1,
- 0x28, 0x00,
- 0x29, 0x1E,
- 0x2A, 0x14,
- 0x2B, 0x0F,
- 0x2C, 0x09,
- 0x2D, 0x05,
- 0x31, 0x1F,
- 0x32, 0x19,
- 0x33, 0xFE,
- 0x34, 0x93,
- 0xff, 0xff,
-};
-
-static struct stv0299_config samsung_tbmu24112_config = {
- .demod_address = 0x68,
- .inittab = samsung_tbmu24112_inittab,
- .mclk = 88000000UL,
- .invert = 0,
- .enhanced_tuning = 0,
- .skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_LK,
- .volt13_op0_op1 = STV0299_VOLT13_OP1,
- .min_delay_ms = 100,
- .set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
- .pll_set = samsung_tbmu24112_pll_set,
-};
-
-
-
-
-
-static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
-{
- static u8 mt352_clock_config [] = { 0x89, 0x10, 0x2d };
- static u8 mt352_reset [] = { 0x50, 0x80 };
- static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
- static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
- static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
-
- mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
- udelay(2000);
- mt352_write(fe, mt352_reset, sizeof(mt352_reset));
- mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
-
- mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
- mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
-
- return 0;
-}
-
-static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
-{
- u32 div;
- unsigned char bs = 0;
-
- #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
- div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
-
- if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
- if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
- if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
-
- pllbuf[0] = 0xc2; // Note: non-linux standard PLL i2c address
- pllbuf[1] = div >> 8;
- pllbuf[2] = div & 0xff;
- pllbuf[3] = 0xcc;
- pllbuf[4] = bs;
-
- return 0;
-}
-
-static struct mt352_config samsung_tdtc9251dh0_config = {
-
- .demod_address = 0x0f,
- .demod_init = samsung_tdtc9251dh0_demod_init,
- .pll_set = samsung_tdtc9251dh0_pll_set,
-};
-
-static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
-{
- u8 buf[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-// struct adapter* adapter = (struct adapter*) fe->dvb->priv;
-
- div = (params->frequency + (125/2)) / 125;
-
- buf[0] = (div >> 8) & 0x7f;
- buf[1] = (div >> 0) & 0xff;
- buf[2] = 0x84 | ((div >> 10) & 0x60);
- buf[3] = 0x80;
-
- if (params->frequency < 1550000)
- buf[3] |= 0x02;
-
- //if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO;
- return 0;
-}
-
-static struct mt312_config skystar23_samsung_tbdu18132_config = {
-
- .demod_address = 0x0e,
- .pll_set = skystar23_samsung_tbdu18132_pll_set,
-};
diff --git a/drivers/media/dvb/b2c2/b2c2-usb-core.c b/drivers/media/dvb/b2c2/b2c2-usb-core.c
deleted file mode 100644
index 9306da0..0000000
--- a/drivers/media/dvb/b2c2/b2c2-usb-core.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * Copyright (C) 2004 Patrick Boettcher <patrick.boettcher@desy.de>,
- * Luca Bertagnolio <>,
- *
- * based on information provided by John Jurrius from BBTI, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, version 2.
- *
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/usb.h>
-#include <linux/moduleparam.h>
-#include <linux/pci.h>
-#include <linux/version.h>
-
-#include "dmxdev.h"
-#include "dvb_demux.h"
-#include "dvb_filter.h"
-#include "dvb_net.h"
-#include "dvb_frontend.h"
-
-/* debug */
-#define dprintk(level,args...) \
- do { if ((debug & level)) { printk(args); } } while (0)
-#define debug_dump(b,l) if (debug) {\
- int i; deb_xfer("%s: %d > ",__FUNCTION__,l); \
- for (i = 0; i < l; i++) deb_xfer("%02x ", b[i]); \
- deb_xfer("\n");\
-}
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4 (or-able)).");
-
-#define deb_info(args...) dprintk(0x01,args)
-#define deb_ts(args...) dprintk(0x02,args)
-#define deb_ctrl(args...) dprintk(0x04,args)
-
-/* Version information */
-#define DRIVER_VERSION "0.0"
-#define DRIVER_DESC "Driver for B2C2/Technisat Air/Cable/Sky-2-PC USB devices"
-#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de"
-
-/* transfer parameters */
-#define B2C2_USB_FRAMES_PER_ISO 4
-#define B2C2_USB_NUM_ISO_URB 4 /* TODO check out a good value */
-
-#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(b2c2->udev,0)
-#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(b2c2->udev,0)
-#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(b2c2->udev,0x81)
-
-struct usb_b2c2_usb {
- struct usb_device *udev;
- struct usb_interface *uintf;
-
- u8 *iso_buffer;
- int buffer_size;
- dma_addr_t iso_dma_handle;
- struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
-};
-
-
-/*
- * USB
- * 10 90 34 12 78 56 04 00
- * usb_control_msg(udev, usb_sndctrlpipe(udev,0),
- * 0x90,
- * 0x10,
- * 0x1234,
- * 0x5678,
- * buf,
- * 4,
- * 5*HZ);
- *
- * extern int usb_control_msg(struct usb_device *dev, unsigned int pipe,
- * __u8 request,
- * __u8 requesttype,
- * __u16 value,
- * __u16 index,
- * void *data,
- * __u16 size,
- * int timeout);
- *
- */
-
-/* request types */
-typedef enum {
-
-/* something is wrong with this part
- RTYPE_READ_DW = (1 << 6),
- RTYPE_WRITE_DW_1 = (3 << 6),
- RTYPE_READ_V8_MEMORY = (6 << 6),
- RTYPE_WRITE_V8_MEMORY = (7 << 6),
- RTYPE_WRITE_V8_FLASH = (8 << 6),
- RTYPE_GENERIC = (9 << 6),
-*/
- RTYPE_READ_DW = (3 << 6),
- RTYPE_WRITE_DW_1 = (1 << 6),
-
- RTYPE_READ_V8_MEMORY = (6 << 6),
- RTYPE_WRITE_V8_MEMORY = (7 << 6),
- RTYPE_WRITE_V8_FLASH = (8 << 6),
- RTYPE_GENERIC = (9 << 6),
-} b2c2_usb_request_type_t;
-
-/* request */
-typedef enum {
- B2C2_USB_WRITE_V8_MEM = 0x04,
- B2C2_USB_READ_V8_MEM = 0x05,
- B2C2_USB_READ_REG = 0x08,
- B2C2_USB_WRITE_REG = 0x0A,
-/* B2C2_USB_WRITEREGLO = 0x0A, */
- B2C2_USB_WRITEREGHI = 0x0B,
- B2C2_USB_FLASH_BLOCK = 0x10,
- B2C2_USB_I2C_REQUEST = 0x11,
- B2C2_USB_UTILITY = 0x12,
-} b2c2_usb_request_t;
-
-/* function definition for I2C_REQUEST */
-typedef enum {
- USB_FUNC_I2C_WRITE = 0x01,
- USB_FUNC_I2C_MULTIWRITE = 0x02,
- USB_FUNC_I2C_READ = 0x03,
- USB_FUNC_I2C_REPEATWRITE = 0x04,
- USB_FUNC_GET_DESCRIPTOR = 0x05,
- USB_FUNC_I2C_REPEATREAD = 0x06,
-/* DKT 020208 - add this to support special case of DiSEqC */
- USB_FUNC_I2C_CHECKWRITE = 0x07,
- USB_FUNC_I2C_CHECKRESULT = 0x08,
-} b2c2_usb_i2c_function_t;
-
-/*
- * function definition for UTILITY request 0x12
- * DKT 020304 - new utility function
- */
-typedef enum {
- UTILITY_SET_FILTER = 0x01,
- UTILITY_DATA_ENABLE = 0x02,
- UTILITY_FLEX_MULTIWRITE = 0x03,
- UTILITY_SET_BUFFER_SIZE = 0x04,
- UTILITY_FLEX_OPERATOR = 0x05,
- UTILITY_FLEX_RESET300_START = 0x06,
- UTILITY_FLEX_RESET300_STOP = 0x07,
- UTILITY_FLEX_RESET300 = 0x08,
- UTILITY_SET_ISO_SIZE = 0x09,
- UTILITY_DATA_RESET = 0x0A,
- UTILITY_GET_DATA_STATUS = 0x10,
- UTILITY_GET_V8_REG = 0x11,
-/* DKT 020326 - add function for v1.14 */
- UTILITY_SRAM_WRITE = 0x12,
- UTILITY_SRAM_READ = 0x13,
- UTILITY_SRAM_TESTFILL = 0x14,
- UTILITY_SRAM_TESTSET = 0x15,
- UTILITY_SRAM_TESTVERIFY = 0x16,
-} b2c2_usb_utility_function_t;
-
-#define B2C2_WAIT_FOR_OPERATION_RW 1 // 1 s
-#define B2C2_WAIT_FOR_OPERATION_RDW 3 // 3 s
-#define B2C2_WAIT_FOR_OPERATION_WDW 1 // 1 s
-
-#define B2C2_WAIT_FOR_OPERATION_V8READ 3 // 3 s
-#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3 // 3 s
-#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3 // 3 s
-
-/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
- * in the IBI address, to make the V8 code simpler.
- * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (these are the six bits used)
- * in general: 0000 0HHH 000L LL00
- * IBI ADDRESS FORMAT: RHHH BLLL
- *
- * where R is the read(1)/write(0) bit, B is the busy bit
- * and HHH and LLL are the two sets of three bits from the PCI address.
- */
-#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
-#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
-
-/*
- * DKT 020228 - forget about this VENDOR_BUFFER_SIZE, read and write register
- * deal with DWORD or 4 bytes, that should be should from now on
- */
-static u32 b2c2_usb_read_dw(struct usb_b2c2_usb *b2c2, u16 wRegOffsPCI)
-{
- u32 val;
- u16 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | 0x0080;
- int len = usb_control_msg(b2c2->udev,
- B2C2_USB_CTRL_PIPE_IN,
- B2C2_USB_READ_REG,
- RTYPE_READ_DW,
- wAddress,
- 0,
- &val,
- sizeof(u32),
- B2C2_WAIT_FOR_OPERATION_RDW * 1000);
-
- if (len != sizeof(u32)) {
- err("error while reading dword from %d (%d).",wAddress,wRegOffsPCI);
- return -EIO;
- } else
- return val;
-}
-
-/*
- * DKT 020228 - from now on, we don't support anything older than firm 1.00
- * I eliminated the write register as a 2 trip of writing hi word and lo word
- * and force this to write only 4 bytes at a time.
- * NOTE: this should work with all the firmware from 1.00 and newer
- */
-static int b2c2_usb_write_dw(struct usb_b2c2_usb *b2c2, u16 wRegOffsPCI, u32 val)
-{
- u16 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI);
- int len = usb_control_msg(b2c2->udev,
- B2C2_USB_CTRL_PIPE_OUT,
- B2C2_USB_WRITE_REG,
- RTYPE_WRITE_DW_1,
- wAddress,
- 0,
- &val,
- sizeof(u32),
- B2C2_WAIT_FOR_OPERATION_RDW * 1000);
-
- if (len != sizeof(u32)) {
- err("error while reading dword from %d (%d).",wAddress,wRegOffsPCI);
- return -EIO;
- } else
- return 0;
-}
-
-/*
- * DKT 010817 - add support for V8 memory read/write and flash update
- */
-static int b2c2_usb_v8_memory_req(struct usb_b2c2_usb *b2c2,
- b2c2_usb_request_t req, u8 page, u16 wAddress,
- u16 buflen, u8 *pbBuffer)
-{
- u8 dwRequestType;
- u16 wIndex;
- int nWaitTime,pipe,len;
-
- wIndex = page << 8;
-
- switch (req) {
- case B2C2_USB_READ_V8_MEM:
- nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
- dwRequestType = (u8) RTYPE_READ_V8_MEMORY;
- pipe = B2C2_USB_CTRL_PIPE_IN;
- break;
- case B2C2_USB_WRITE_V8_MEM:
- wIndex |= pbBuffer[0];
- nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
- dwRequestType = (u8) RTYPE_WRITE_V8_MEMORY;
- pipe = B2C2_USB_CTRL_PIPE_OUT;
- break;
- case B2C2_USB_FLASH_BLOCK:
- nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
- dwRequestType = (u8) RTYPE_WRITE_V8_FLASH;
- pipe = B2C2_USB_CTRL_PIPE_OUT;
- break;
- default:
- deb_info("unsupported request for v8_mem_req %x.\n",req);
- return -EINVAL;
- }
- len = usb_control_msg(b2c2->udev,pipe,
- req,
- dwRequestType,
- wAddress,
- wIndex,
- pbBuffer,
- buflen,
- nWaitTime * 1000);
- return len == buflen ? 0 : -EIO;
-}
-
-static int b2c2_usb_i2c_req(struct usb_b2c2_usb *b2c2,
- b2c2_usb_request_t req, b2c2_usb_i2c_function_t func,
- u8 port, u8 chipaddr, u8 addr, u8 buflen, u8 *buf)
-{
- u16 wValue, wIndex;
- int nWaitTime,pipe,len;
- u8 dwRequestType;
-
- switch (func) {
- case USB_FUNC_I2C_WRITE:
- case USB_FUNC_I2C_MULTIWRITE:
- case USB_FUNC_I2C_REPEATWRITE:
- /* DKT 020208 - add this to support special case of DiSEqC */
- case USB_FUNC_I2C_CHECKWRITE:
- pipe = B2C2_USB_CTRL_PIPE_OUT;
- nWaitTime = 2;
- dwRequestType = (u8) RTYPE_GENERIC;
- break;
- case USB_FUNC_I2C_READ:
- case USB_FUNC_I2C_REPEATREAD:
- pipe = B2C2_USB_CTRL_PIPE_IN;
- nWaitTime = 2;
- dwRequestType = (u8) RTYPE_GENERIC;
- break;
- default:
- deb_info("unsupported function for i2c_req %x\n",func);
- return -EINVAL;
- }
- wValue = (func << 8 ) | port;
- wIndex = (chipaddr << 8 ) | addr;
-
- len = usb_control_msg(b2c2->udev,pipe,
- req,
- dwRequestType,
- addr,
- wIndex,
- buf,
- buflen,
- nWaitTime * 1000);
- return len == buflen ? 0 : -EIO;
-}
-
-int static b2c2_usb_utility_req(struct usb_b2c2_usb *b2c2, int set,
- b2c2_usb_utility_function_t func, u8 extra, u16 wIndex,
- u16 buflen, u8 *pvBuffer)
-{
- u16 wValue;
- int nWaitTime = 2,
- pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN,
- len;
-
- wValue = (func << 8) | extra;
-
- len = usb_control_msg(b2c2->udev,pipe,
- B2C2_USB_UTILITY,
- (u8) RTYPE_GENERIC,
- wValue,
- wIndex,
- pvBuffer,
- buflen,
- nWaitTime * 1000);
- return len == buflen ? 0 : -EIO;
-}
-
-
-
-static void b2c2_dumpfourreg(struct usb_b2c2_usb *b2c2, u16 offs)
-{
- u32 r0,r1,r2,r3;
- r0 = r1 = r2 = r3 = 0;
- r0 = b2c2_usb_read_dw(b2c2,offs);
- r1 = b2c2_usb_read_dw(b2c2,offs + 0x04);
- r2 = b2c2_usb_read_dw(b2c2,offs + 0x08);
- r3 = b2c2_usb_read_dw(b2c2,offs + 0x0c);
- deb_ctrl("dump: offset: %03x, %08x, %08x, %08x, %08x\n",offs,r0,r1,r2,r3);
-}
-
-static void b2c2_urb_complete(struct urb *urb, struct pt_regs *ptregs)
-{
- struct usb_b2c2_usb *b2c2 = urb->context;
- deb_ts("urb completed, bufsize: %d\n",urb->transfer_buffer_length);
-
-// urb_submit_urb(urb,GFP_ATOMIC); enable for real action
-}
-
-static void b2c2_exit_usb(struct usb_b2c2_usb *b2c2)
-{
- int i;
- for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
- if (b2c2->iso_urb[i] != NULL) { /* not sure about unlink_urb and iso-urbs TODO */
- deb_info("unlinking/killing urb no. %d\n",i);
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,7)
- usb_unlink_urb(b2c2->iso_urb[i]);
-#else
- usb_kill_urb(b2c2->iso_urb[i]);
-#endif
- usb_free_urb(b2c2->iso_urb[i]);
- }
-
- if (b2c2->iso_buffer != NULL)
- pci_free_consistent(NULL,b2c2->buffer_size, b2c2->iso_buffer, b2c2->iso_dma_handle);
-
-}
-
-static int b2c2_init_usb(struct usb_b2c2_usb *b2c2)
-{
- u16 frame_size = le16_to_cpu(b2c2->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
- int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret;
- int buffer_offset = 0;
-
- deb_info("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n",
- B2C2_USB_NUM_ISO_URB, B2C2_USB_FRAMES_PER_ISO, frame_size,bufsize);
-
- b2c2->iso_buffer = pci_alloc_consistent(NULL,bufsize,&b2c2->iso_dma_handle);
- if (b2c2->iso_buffer == NULL)
- return -ENOMEM;
- memset(b2c2->iso_buffer, 0, bufsize);
- b2c2->buffer_size = bufsize;
-
- /* creating iso urbs */
- for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
- if (!(b2c2->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,GFP_ATOMIC))) {
- ret = -ENOMEM;
- goto urb_error;
- }
- /* initialising and submitting iso urbs */
- for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
- int frame_offset = 0;
- struct urb *urb = b2c2->iso_urb[i];
- deb_info("initializing and submitting urb no. %d (buf_offset: %d).\n",i,buffer_offset);
-
- urb->dev = b2c2->udev;
- urb->context = b2c2;
- urb->complete = b2c2_urb_complete;
- urb->pipe = B2C2_USB_DATA_PIPE;
- urb->transfer_flags = URB_ISO_ASAP;
- urb->interval = 1;
- urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO;
- urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO;
- urb->transfer_buffer = b2c2->iso_buffer + buffer_offset;
-
- buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
- for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
- deb_info("urb no: %d, frame: %d, frame_offset: %d\n",i,j,frame_offset);
- urb->iso_frame_desc[j].offset = frame_offset;
- urb->iso_frame_desc[j].length = frame_size;
- frame_offset += frame_size;
- }
-
- if ((ret = usb_submit_urb(b2c2->iso_urb[i],GFP_ATOMIC))) {
- err("submitting urb %d failed with %d.",i,ret);
- goto urb_error;
- }
- deb_info("submitted urb no. %d.\n",i);
- }
-
- ret = 0;
- goto success;
-urb_error:
- b2c2_exit_usb(b2c2);
-success:
- return ret;
-}
-
-static int b2c2_usb_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- struct usb_device *udev = interface_to_usbdev(intf);
- struct usb_b2c2_usb *b2c2 = NULL;
- int ret;
-
- b2c2 = kmalloc(sizeof(struct usb_b2c2_usb),GFP_KERNEL);
- if (b2c2 == NULL) {
- err("no memory");
- return -ENOMEM;
- }
- b2c2->udev = udev;
- b2c2->uintf = intf;
-
- /* use the alternate setting with the larges buffer */
- usb_set_interface(udev,0,1);
-
- if ((ret = b2c2_init_usb(b2c2)))
- goto usb_init_error;
-
- usb_set_intfdata(intf,b2c2);
-
- switch (udev->speed) {
- case USB_SPEED_LOW:
- err("cannot handle USB speed because it is to sLOW.");
- break;
- case USB_SPEED_FULL:
- info("running at FULL speed.");
- break;
- case USB_SPEED_HIGH:
- info("running at HIGH speed.");
- break;
- case USB_SPEED_UNKNOWN: /* fall through */
- default:
- err("cannot handle USB speed because it is unkown.");
- break;
- }
-
- b2c2_dumpfourreg(b2c2,0x200);
- b2c2_dumpfourreg(b2c2,0x300);
- b2c2_dumpfourreg(b2c2,0x400);
- b2c2_dumpfourreg(b2c2,0x700);
-
-
- if (ret == 0)
- info("%s successfully initialized and connected.",DRIVER_DESC);
- else
- info("%s error while loading driver (%d)",DRIVER_DESC,ret);
-
- ret = 0;
- goto success;
-
-usb_init_error:
- kfree(b2c2);
-success:
- return ret;
-}
-
-static void b2c2_usb_disconnect(struct usb_interface *intf)
-{
- struct usb_b2c2_usb *b2c2 = usb_get_intfdata(intf);
- usb_set_intfdata(intf,NULL);
- if (b2c2 != NULL) {
- b2c2_exit_usb(b2c2);
- kfree(b2c2);
- }
- info("%s successfully deinitialized and disconnected.",DRIVER_DESC);
-
-}
-
-static struct usb_device_id b2c2_usb_table [] = {
- { USB_DEVICE(0x0af7, 0x0101) }
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver b2c2_usb_driver = {
- .owner = THIS_MODULE,
- .name = "dvb_b2c2_usb",
- .probe = b2c2_usb_probe,
- .disconnect = b2c2_usb_disconnect,
- .id_table = b2c2_usb_table,
-};
-
-/* module stuff */
-static int __init b2c2_usb_init(void)
-{
- int result;
- if ((result = usb_register(&b2c2_usb_driver))) {
- err("usb_register failed. Error number %d",result);
- return result;
- }
-
- return 0;
-}
-
-static void __exit b2c2_usb_exit(void)
-{
- /* deregister this driver from the USB subsystem */
- usb_deregister(&b2c2_usb_driver);
-}
-
-module_init (b2c2_usb_init);
-module_exit (b2c2_usb_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(usb, b2c2_usb_table);
diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h
new file mode 100644
index 0000000..773d158
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-common.h
@@ -0,0 +1,164 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-common.h - common header file for device-specific source files also.
+ *
+ * see flexcop.c for copyright information.
+ */
+#ifndef __FLEXCOP_COMMON_H__
+#define __FLEXCOP_COMMON_H__
+
+#include <linux/config.h>
+#include <linux/pci.h>
+
+#include "flexcop-reg.h"
+
+#include "dmxdev.h"
+#include "dvb_demux.h"
+#include "dvb_filter.h"
+#include "dvb_net.h"
+#include "dvb_frontend.h"
+
+#define FC_MAX_FEED 256
+
+#ifndef FC_LOG_PREFIX
+#warning please define a log prefix for your file, using a default one
+#define FC_LOG_PREFIX "b2c2-undef"
+#endif
+
+/* Steal from usb.h */
+#undef err
+#define err(format, arg...) printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg)
+#undef info
+#define info(format, arg...) printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg)
+#undef warn
+#define warn(format, arg...) printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg)
+
+struct flexcop_dma {
+ struct pci_dev *pdev;
+
+ u8 *cpu_addr0;
+ dma_addr_t dma_addr0;
+ u8 *cpu_addr1;
+ dma_addr_t dma_addr1;
+ u32 size; /* size of each address in bytes */
+};
+
+/* Control structure for data definitions that are common to
+ * the B2C2-based PCI and USB devices.
+ */
+struct flexcop_device {
+ /* general */
+ struct device *dev; /* for firmware_class */
+
+#define FC_STATE_DVB_INIT 0x01
+#define FC_STATE_I2C_INIT 0x02
+#define FC_STATE_FE_INIT 0x04
+ int init_state;
+
+ /* device information */
+ int has_32_hw_pid_filter;
+ flexcop_revision_t rev;
+ flexcop_device_type_t dev_type;
+ flexcop_bus_t bus_type;
+
+ /* dvb stuff */
+ struct dvb_adapter dvb_adapter;
+ struct dvb_frontend *fe;
+ struct dvb_net dvbnet;
+ struct dvb_demux demux;
+ struct dmxdev dmxdev;
+ struct dmx_frontend hw_frontend;
+ struct dmx_frontend mem_frontend;
+ int (*fe_sleep) (struct dvb_frontend *);
+
+ struct i2c_adapter i2c_adap;
+ struct semaphore i2c_sem;
+
+ struct module *owner;
+
+ /* options and status */
+ int extra_feedcount;
+ int feedcount;
+ int pid_filtering;
+ int fullts_streaming_state;
+
+ /* bus specific callbacks */
+ flexcop_ibi_value (*read_ibi_reg) (struct flexcop_device *, flexcop_ibi_register);
+ int (*write_ibi_reg) (struct flexcop_device *, flexcop_ibi_register, flexcop_ibi_value);
+
+
+ int (*i2c_request) (struct flexcop_device*, flexcop_access_op_t, flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
+ int (*stream_control) (struct flexcop_device*, int);
+
+ int (*get_mac_addr) (struct flexcop_device *fc, int extended);
+
+ void *bus_specific;
+};
+
+/* exported prototypes */
+
+/* from flexcop.c */
+void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len);
+void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no);
+
+struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len);
+void flexcop_device_kfree(struct flexcop_device*);
+
+int flexcop_device_initialize(struct flexcop_device*);
+void flexcop_device_exit(struct flexcop_device *fc);
+
+/* from flexcop-dma.c */
+int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size);
+void flexcop_dma_free(struct flexcop_dma *dma);
+
+int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
+int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
+int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
+int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index);
+int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles);
+int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets);
+
+/* from flexcop-eeprom.c */
+/* the PCI part uses this call to get the MAC address, the USB part has its own */
+int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended);
+
+/* from flexcop-i2c.c */
+/* the PCI part uses this a i2c_request callback, whereas the usb part has its own
+ * one. We have it in flexcop-i2c.c, because it is going via the actual
+ * I2C-channel of the flexcop.
+ */
+int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t,
+ flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
+
+/* from flexcop-sram.c */
+int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target);
+void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s);
+void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill);
+
+/* global prototypes for the flexcop-chip */
+/* from flexcop-fe-tuner.c */
+int flexcop_frontend_init(struct flexcop_device *card);
+void flexcop_frontend_exit(struct flexcop_device *fc);
+
+/* from flexcop-i2c.c */
+int flexcop_i2c_init(struct flexcop_device *fc);
+void flexcop_i2c_exit(struct flexcop_device *fc);
+
+/* from flexcop-sram.c */
+int flexcop_sram_init(struct flexcop_device *fc);
+
+/* from flexcop-misc.c */
+void flexcop_determine_revision(struct flexcop_device *fc);
+void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const char *suffix);
+
+/* from flexcop-hw-filter.c */
+int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff);
+void flexcop_hw_filter_init(struct flexcop_device *fc);
+
+void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff);
+
+void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]);
+void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff);
+
+#endif
diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c
new file mode 100644
index 0000000..8d27060
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-dma.c
@@ -0,0 +1,149 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-dma.c - methods for configuring and controlling the DMA of the FlexCop.
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size)
+{
+ u8 *tcpu;
+ dma_addr_t tdma;
+
+ if (size % 2) {
+ err("dma buffersize has to be even.");
+ return -EINVAL;
+ }
+
+ if ((tcpu = pci_alloc_consistent(pdev, size, &tdma)) != NULL) {
+ dma->pdev = pdev;
+ dma->cpu_addr0 = tcpu;
+ dma->dma_addr0 = tdma;
+ dma->cpu_addr1 = tcpu + size/2;
+ dma->dma_addr1 = tdma + size/2;
+ dma->size = size/2;
+ return 0;
+ }
+ return -ENOMEM;
+}
+EXPORT_SYMBOL(flexcop_dma_allocate);
+
+void flexcop_dma_free(struct flexcop_dma *dma)
+{
+ pci_free_consistent(dma->pdev, dma->size*2,dma->cpu_addr0, dma->dma_addr0);
+ memset(dma,0,sizeof(struct flexcop_dma));
+}
+EXPORT_SYMBOL(flexcop_dma_free);
+
+int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff)
+{
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
+
+ if (no & FC_DMA_1)
+ v.ctrl_208.DMA1_Timer_Enable_sig = onoff;
+
+ if (no & FC_DMA_2)
+ v.ctrl_208.DMA2_Timer_Enable_sig = onoff;
+
+ fc->write_ibi_reg(fc,ctrl_208,v);
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_control_timer_irq);
+
+int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff)
+{
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
+
+ if (no & FC_DMA_1)
+ v.ctrl_208.DMA1_IRQ_Enable_sig = onoff;
+
+ if (no & FC_DMA_2)
+ v.ctrl_208.DMA2_IRQ_Enable_sig = onoff;
+
+ fc->write_ibi_reg(fc,ctrl_208,v);
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_control_size_irq);
+
+int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff)
+{
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
+
+ if (no & FC_DMA_1)
+ v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff;
+
+ if (no & FC_DMA_2)
+ v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff;
+
+ fc->write_ibi_reg(fc,ctrl_208,v);
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_control_packet_irq);
+
+int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index)
+{
+
+ flexcop_ibi_value v0x0,v0x4,v0xc;
+ v0x0.raw = v0x4.raw = v0xc.raw = 0;
+
+ v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2;
+ v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2;
+ v0x4.dma_0x4_write.dma_addr_size = dma->size / 4;
+
+ if (index & FC_DMA_SUBADDR_0)
+ v0x0.dma_0x0.dma_0start = 1;
+
+ if (index & FC_DMA_SUBADDR_1)
+ v0xc.dma_0xc.dma_1start = 1;
+
+ if (dma_idx & FC_DMA_1) {
+ fc->write_ibi_reg(fc,dma1_000,v0x0);
+ fc->write_ibi_reg(fc,dma1_004,v0x4);
+ fc->write_ibi_reg(fc,dma1_00c,v0xc);
+ } else { /* (dma_idx & FC_DMA_2) */
+ fc->write_ibi_reg(fc,dma2_010,v0x0);
+ fc->write_ibi_reg(fc,dma2_014,v0x4);
+ fc->write_ibi_reg(fc,dma2_01c,v0xc);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_config);
+
+static int flexcop_dma_remap(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, int onoff)
+{
+ flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c;
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
+ v.dma_0xc.remap_enable = onoff;
+ fc->write_ibi_reg(fc,r,v);
+ return 0;
+}
+
+/* 1 cycles = 1.97 msec */
+int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles)
+{
+ flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
+
+ flexcop_dma_remap(fc,dma_idx,0);
+
+ v.dma_0x4_write.dmatimer = cycles >> 1;
+ fc->write_ibi_reg(fc,r,v);
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_config_timer);
+
+int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets)
+{
+ flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
+
+ flexcop_dma_remap(fc,dma_idx,1);
+
+ v.dma_0x4_remap.DMA_maxpackets = packets;
+ fc->write_ibi_reg(fc,r,v);
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_config_packet_count);
diff --git a/drivers/media/dvb/b2c2/flexcop-eeprom.c b/drivers/media/dvb/b2c2/flexcop-eeprom.c
new file mode 100644
index 0000000..bbcf070
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-eeprom.c
@@ -0,0 +1,153 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading is used)
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+#if 0
+/*EEPROM (Skystar2 has one "24LC08B" chip on board) */
+static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len)
+{
+ return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len);
+}
+
+static int eeprom_lrc_write(struct adapter *adapter, u32 addr, u32 len, u8 *wbuf, u8 *rbuf, int retries)
+{
+ int i;
+
+ for (i = 0; i < retries; i++) {
+ if (eeprom_write(adapter, addr, wbuf, len) == len) {
+ if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+/* These functions could be used to unlock SkyStar2 cards. */
+
+static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len)
+{
+ u8 rbuf[20];
+ u8 wbuf[20];
+
+ if (len != 16)
+ return 0;
+
+ memcpy(wbuf, key, len);
+
+ wbuf[16] = 0;
+ wbuf[17] = 0;
+ wbuf[18] = 0;
+ wbuf[19] = calc_lrc(wbuf, 19);
+
+ return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4);
+}
+
+static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len)
+{
+ u8 buf[20];
+
+ if (len != 16)
+ return 0;
+
+ if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0)
+ return 0;
+
+ memcpy(key, buf, len);
+
+ return 1;
+}
+
+static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac)
+{
+ u8 tmp[8];
+
+ if (type != 0) {
+ tmp[0] = mac[0];
+ tmp[1] = mac[1];
+ tmp[2] = mac[2];
+ tmp[3] = mac[5];
+ tmp[4] = mac[6];
+ tmp[5] = mac[7];
+
+ } else {
+
+ tmp[0] = mac[0];
+ tmp[1] = mac[1];
+ tmp[2] = mac[2];
+ tmp[3] = mac[3];
+ tmp[4] = mac[4];
+ tmp[5] = mac[5];
+ }
+
+ tmp[6] = 0;
+ tmp[7] = calc_lrc(tmp, 7);
+
+ if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8)
+ return 1;
+
+ return 0;
+}
+
+static int flexcop_eeprom_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len)
+{
+ return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len);
+}
+
+#endif
+
+static u8 calc_lrc(u8 *buf, int len)
+{
+ int i;
+ u8 sum = 0;
+ for (i = 0; i < len; i++)
+ sum = sum ^ buf[i];
+ return sum;
+}
+
+static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries)
+{
+ int i,ret = 0;
+ u8 chipaddr = 0x50 | ((addr >> 8) & 3);
+ for (i = 0; i < retries; i++)
+ if ((ret = fc->i2c_request(fc,op,FC_I2C_PORT_EEPROM,chipaddr,addr & 0xff,buf,len)) == 0)
+ break;
+ return ret;
+}
+
+static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len, int retries)
+{
+ int ret = flexcop_eeprom_request(fc,FC_READ,addr,buf,len,retries);
+ if (ret == 0)
+ if (calc_lrc(buf, len - 1) != buf[len - 1])
+ ret = -EINVAL;
+ return ret;
+}
+
+/* JJ's comment about extended == 1: it is not presently used anywhere but was
+ * added to the low-level functions for possible support of EUI64
+ */
+int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
+{
+ u8 buf[8];
+ int ret = 0;
+
+ if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) {
+ if (extended != 0) {
+ err("TODO: extended (EUI64) MAC addresses aren't completely supported yet");
+ ret = -EINVAL;
+/* memcpy(fc->dvb_adapter.proposed_mac,buf,3);
+ mac[3] = 0xfe;
+ mac[4] = 0xff;
+ memcpy(&fc->dvb_adapter.proposed_mac[3],&buf[5],3); */
+ } else
+ memcpy(fc->dvb_adapter.proposed_mac,buf,6);
+ }
+ return ret;
+}
+EXPORT_SYMBOL(flexcop_eeprom_check_mac_addr);
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
new file mode 100644
index 0000000..71be400
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -0,0 +1,403 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+#include "stv0299.h"
+#include "mt352.h"
+#include "nxt2002.h"
+#include "stv0297.h"
+#include "mt312.h"
+
+/* lnb control */
+
+static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct flexcop_device *fc = fe->dvb->priv;
+ flexcop_ibi_value v;
+ deb_tuner("polarity/voltage = %u\n", voltage);
+
+ v = fc->read_ibi_reg(fc, misc_204);
+ switch (voltage) {
+ case SEC_VOLTAGE_OFF:
+ v.misc_204.ACPI1_sig = 1;
+ break;
+ case SEC_VOLTAGE_13:
+ v.misc_204.ACPI1_sig = 0;
+ v.misc_204.LNB_L_H_sig = 0;
+ break;
+ case SEC_VOLTAGE_18:
+ v.misc_204.ACPI1_sig = 0;
+ v.misc_204.LNB_L_H_sig = 1;
+ break;
+ default:
+ err("unknown SEC_VOLTAGE value");
+ return -EINVAL;
+ }
+ return fc->write_ibi_reg(fc, misc_204, v);
+}
+
+static int flexcop_sleep(struct dvb_frontend* fe)
+{
+ struct flexcop_device *fc = fe->dvb->priv;
+/* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
+
+ if (fc->fe_sleep)
+ return fc->fe_sleep(fe);
+
+/* v.misc_204.ACPI3_sig = 1;
+ fc->write_ibi_reg(fc,misc_204,v);*/
+
+ return 0;
+}
+
+static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+ /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
+ struct flexcop_device *fc = fe->dvb->priv;
+ flexcop_ibi_value v;
+ u16 ax;
+ v.raw = 0;
+
+ deb_tuner("tone = %u\n",tone);
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ ax = 0x01ff;
+ break;
+ case SEC_TONE_OFF:
+ ax = 0;
+ break;
+ default:
+ err("unknown SEC_TONE value");
+ return -EINVAL;
+ }
+
+ v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
+
+ v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
+ v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax;
+
+ return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
+}
+
+static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
+{
+ flexcop_set_tone(fe, SEC_TONE_ON);
+ udelay(data ? 500 : 1000);
+ flexcop_set_tone(fe, SEC_TONE_OFF);
+ udelay(data ? 1000 : 500);
+}
+
+static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
+{
+ int i, par = 1, d;
+
+ for (i = 7; i >= 0; i--) {
+ d = (data >> i) & 1;
+ par ^= d;
+ flexcop_diseqc_send_bit(fe, d);
+ }
+
+ flexcop_diseqc_send_bit(fe, par);
+}
+
+static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
+{
+ int i;
+
+ flexcop_set_tone(fe, SEC_TONE_OFF);
+ mdelay(16);
+
+ for (i = 0; i < len; i++)
+ flexcop_diseqc_send_byte(fe,msg[i]);
+
+ mdelay(16);
+
+ if (burst != -1) {
+ if (burst)
+ flexcop_diseqc_send_byte(fe, 0xff);
+ else {
+ flexcop_set_tone(fe, SEC_TONE_ON);
+ udelay(12500);
+ flexcop_set_tone(fe, SEC_TONE_OFF);
+ }
+ msleep(20);
+ }
+ return 0;
+}
+
+static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+{
+ return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
+}
+
+static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+{
+ return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
+}
+
+/* dvb-s stv0299 */
+static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+ else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+ else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+ else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+ else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+ else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+ stv0299_writereg (fe, 0x13, aclk);
+ stv0299_writereg (fe, 0x14, bclk);
+ stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
+
+ return 0;
+}
+
+static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ u8 buf[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+ struct flexcop_device *fc = fe->dvb->priv;
+
+ div = params->frequency / 125;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x84; /* 0xC4 */
+ buf[3] = 0x08;
+
+ if (params->frequency < 1500000) buf[3] |= 0x10;
+
+ if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static u8 samsung_tbmu24112_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7D,
+ 0x05, 0x35,
+ 0x06, 0x02,
+ 0x07, 0x00,
+ 0x08, 0xC3,
+ 0x0C, 0x00,
+ 0x0D, 0x81,
+ 0x0E, 0x23,
+ 0x0F, 0x12,
+ 0x10, 0x7E,
+ 0x11, 0x84,
+ 0x12, 0xB9,
+ 0x13, 0x88,
+ 0x14, 0x89,
+ 0x15, 0xC9,
+ 0x16, 0x00,
+ 0x17, 0x5C,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1A, 0x00,
+ 0x1C, 0x00,
+ 0x1D, 0x00,
+ 0x1E, 0x00,
+ 0x1F, 0x3A,
+ 0x20, 0x2E,
+ 0x21, 0x80,
+ 0x22, 0xFF,
+ 0x23, 0xC1,
+ 0x28, 0x00,
+ 0x29, 0x1E,
+ 0x2A, 0x14,
+ 0x2B, 0x0F,
+ 0x2C, 0x09,
+ 0x2D, 0x05,
+ 0x31, 0x1F,
+ 0x32, 0x19,
+ 0x33, 0xFE,
+ 0x34, 0x93,
+ 0xff, 0xff,
+};
+
+static struct stv0299_config samsung_tbmu24112_config = {
+ .demod_address = 0x68,
+ .inittab = samsung_tbmu24112_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .enhanced_tuning = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_LK,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
+ .pll_set = samsung_tbmu24112_pll_set,
+};
+
+/* dvb-t mt352 */
+static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
+{
+ static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
+ static u8 mt352_reset [] = { 0x50, 0x80 };
+ static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+ static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
+ static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+ mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+ udelay(2000);
+ mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+ mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+
+ mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
+ mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+ return 0;
+}
+
+static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
+{
+ u32 div;
+ unsigned char bs = 0;
+
+ #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
+ div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+ if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
+ if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
+ if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
+
+ pllbuf[0] = 0xc2; /* Note: non-linux standard PLL i2c address */
+ pllbuf[1] = div >> 8;
+ pllbuf[2] = div & 0xff;
+ pllbuf[3] = 0xcc;
+ pllbuf[4] = bs;
+
+ return 0;
+}
+
+static struct mt352_config samsung_tdtc9251dh0_config = {
+
+ .demod_address = 0x0f,
+ .demod_init = samsung_tdtc9251dh0_demod_init,
+ .pll_set = samsung_tdtc9251dh0_pll_set,
+};
+
+static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+{
+ struct flexcop_device *fc = fe->dvb->priv;
+ return request_firmware(fw, name, fc->dev);
+}
+
+static struct nxt2002_config samsung_tbmv_config = {
+ .demod_address = 0x0a,
+ .request_firmware = nxt2002_request_firmware,
+};
+
+static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ u8 buf[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+ struct flexcop_device *fc = fe->dvb->priv;
+
+ div = (params->frequency + (125/2)) / 125;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = (div >> 0) & 0xff;
+ buf[2] = 0x84 | ((div >> 10) & 0x60);
+ buf[3] = 0x80;
+
+ if (params->frequency < 1550000)
+ buf[3] |= 0x02;
+
+ if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static struct mt312_config skystar23_samsung_tbdu18132_config = {
+
+ .demod_address = 0x0e,
+ .pll_set = skystar23_samsung_tbdu18132_pll_set,
+};
+
+static struct stv0297_config alps_tdee4_stv0297_config = {
+ .demod_address = 0x1c,
+// .invert = 1,
+// .pll_set = alps_tdee4_stv0297_pll_set,
+};
+
+/* try to figure out the frontend, each card/box can have on of the following list */
+int flexcop_frontend_init(struct flexcop_device *fc)
+{
+ /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
+ if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) {
+ fc->fe->ops->set_voltage = flexcop_set_voltage;
+
+ fc->fe_sleep = fc->fe->ops->sleep;
+ fc->fe->ops->sleep = flexcop_sleep;
+
+ fc->dev_type = FC_SKY;
+ info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address);
+ } else
+ /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
+ if ((fc->fe = mt352_attach(&samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) {
+ fc->dev_type = FC_AIR_DVB;
+ info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
+ } else
+ /* try the air atsc (nxt2002) */
+ if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
+ fc->dev_type = FC_AIR_ATSC;
+ info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
+ } else
+ /* try the cable dvb (stv0297) */
+ if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) {
+ fc->dev_type = FC_CABLE;
+ info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
+ } else
+ /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
+ if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
+ fc->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
+ fc->fe->ops->diseqc_send_burst = flexcop_diseqc_send_burst;
+ fc->fe->ops->set_tone = flexcop_set_tone;
+ fc->fe->ops->set_voltage = flexcop_set_voltage;
+
+ fc->fe_sleep = fc->fe->ops->sleep;
+ fc->fe->ops->sleep = flexcop_sleep;
+
+ fc->dev_type = FC_SKY_OLD;
+ info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address);
+ }
+
+ if (fc->fe == NULL) {
+ err("no frontend driver found for this B2C2/FlexCop adapter");
+ return -ENODEV;
+ } else {
+ if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
+ err("frontend registration failed!");
+ if (fc->fe->ops->release != NULL)
+ fc->fe->ops->release(fc->fe);
+ fc->fe = NULL;
+ return -EINVAL;
+ }
+ }
+ fc->init_state |= FC_STATE_FE_INIT;
+ return 0;
+}
+
+void flexcop_frontend_exit(struct flexcop_device *fc)
+{
+ if (fc->init_state & FC_STATE_FE_INIT)
+ dvb_unregister_frontend(fc->fe);
+
+ fc->init_state &= ~FC_STATE_FE_INIT;
+}
diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c
new file mode 100644
index 0000000..2baf43d
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-hw-filter.c
@@ -0,0 +1,204 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-hw-filter.c - pid and mac address filtering and corresponding control functions.
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff)
+{
+ flexcop_set_ibi_value(ctrl_208,Rcv_Data_sig,onoff);
+}
+
+void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff)
+{
+ flexcop_set_ibi_value(ctrl_208,SMC_Enable_sig,onoff);
+}
+
+void flexcop_null_filter_ctrl(struct flexcop_device *fc, int onoff)
+{
+ flexcop_set_ibi_value(ctrl_208,Null_filter_sig,onoff);
+}
+
+void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6])
+{
+ flexcop_ibi_value v418,v41c;
+ v41c = fc->read_ibi_reg(fc,mac_address_41c);
+
+ v418.mac_address_418.MAC1 = mac[0];
+ v418.mac_address_418.MAC2 = mac[1];
+ v418.mac_address_418.MAC3 = mac[2];
+ v418.mac_address_418.MAC6 = mac[3];
+ v41c.mac_address_41c.MAC7 = mac[4];
+ v41c.mac_address_41c.MAC8 = mac[5];
+
+ fc->write_ibi_reg(fc,mac_address_418,v418);
+ fc->write_ibi_reg(fc,mac_address_41c,v41c);
+}
+
+void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff)
+{
+ flexcop_set_ibi_value(ctrl_208,MAC_filter_Mode_sig,onoff);
+}
+
+static void flexcop_pid_group_filter(struct flexcop_device *fc, u16 pid, u16 mask)
+{
+ /* index_reg_310.extra_index_reg need to 0 or 7 to work */
+ flexcop_ibi_value v30c;
+ v30c.pid_filter_30c_ext_ind_0_7.Group_PID = pid;
+ v30c.pid_filter_30c_ext_ind_0_7.Group_mask = mask;
+ fc->write_ibi_reg(fc,pid_filter_30c,v30c);
+}
+
+static void flexcop_pid_group_filter_ctrl(struct flexcop_device *fc, int onoff)
+{
+ flexcop_set_ibi_value(ctrl_208,Mask_filter_sig,onoff);
+}
+
+/* this fancy define reduces the code size of the quite similar PID controlling of
+ * the first 6 PIDs
+ */
+
+#define pid_ctrl(vregname,field,enablefield,trans_field,transval) \
+ flexcop_ibi_value vpid = fc->read_ibi_reg(fc, vregname), \
+ v208 = fc->read_ibi_reg(fc, ctrl_208); \
+\
+ vpid.vregname.field = onoff ? pid : 0x1fff; \
+ vpid.vregname.trans_field = transval; \
+ v208.ctrl_208.enablefield = onoff; \
+\
+ fc->write_ibi_reg(fc,vregname,vpid); \
+ fc->write_ibi_reg(fc,ctrl_208,v208);
+
+static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+{
+ pid_ctrl(pid_filter_300,Stream1_PID,Stream1_filter_sig,Stream1_trans,0);
+}
+
+static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+{
+ pid_ctrl(pid_filter_300,Stream2_PID,Stream2_filter_sig,Stream2_trans,0);
+}
+
+static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+{
+ pid_ctrl(pid_filter_304,PCR_PID,PCR_filter_sig,PCR_trans,0);
+}
+
+static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+{
+ pid_ctrl(pid_filter_304,PMT_PID,PMT_filter_sig,PMT_trans,0);
+}
+
+static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+{
+ pid_ctrl(pid_filter_308,EMM_PID,EMM_filter_sig,EMM_trans,0);
+}
+
+static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+{
+ pid_ctrl(pid_filter_308,ECM_PID,ECM_filter_sig,ECM_trans,0);
+}
+
+static void flexcop_pid_control(struct flexcop_device *fc, int index, u16 pid,int onoff)
+{
+ if (pid == 0x2000)
+ return;
+
+ deb_ts("setting pid: %5d %04x at index %d '%s'\n",pid,pid,index,onoff ? "on" : "off");
+
+ /* We could use bit magic here to reduce source code size.
+ * I decided against it, but to use the real register names */
+ switch (index) {
+ case 0: flexcop_pid_Stream1_PID_ctrl(fc,pid,onoff); break;
+ case 1: flexcop_pid_Stream2_PID_ctrl(fc,pid,onoff); break;
+ case 2: flexcop_pid_PCR_PID_ctrl(fc,pid,onoff); break;
+ case 3: flexcop_pid_PMT_PID_ctrl(fc,pid,onoff); break;
+ case 4: flexcop_pid_EMM_PID_ctrl(fc,pid,onoff); break;
+ case 5: flexcop_pid_ECM_PID_ctrl(fc,pid,onoff); break;
+ default:
+ if (fc->has_32_hw_pid_filter && index < 38) {
+ flexcop_ibi_value vpid,vid;
+
+ /* set the index */
+ vid = fc->read_ibi_reg(fc,index_reg_310);
+ vid.index_reg_310.index_reg = index - 6;
+ fc->write_ibi_reg(fc,index_reg_310, vid);
+
+ vpid = fc->read_ibi_reg(fc,pid_n_reg_314);
+ vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff;
+ vpid.pid_n_reg_314.PID_enable_bit = onoff;
+ fc->write_ibi_reg(fc,pid_n_reg_314, vpid);
+ }
+ break;
+ }
+}
+
+static int flexcop_toggle_fullts_streaming(struct flexcop_device *fc,int onoff)
+{
+ if (fc->fullts_streaming_state != onoff) {
+ deb_ts("%s full TS transfer\n",onoff ? "enabling" : "disabling");
+ flexcop_pid_group_filter(fc, 0, 0x1fe0 * (!onoff));
+ flexcop_pid_group_filter_ctrl(fc,onoff);
+ fc->fullts_streaming_state = onoff;
+ }
+ return 0;
+}
+
+int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff)
+{
+ int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32;
+
+ fc->feedcount += onoff ? 1 : -1;
+ if (dvbdmxfeed->index >= max_pid_filter)
+ fc->extra_feedcount += onoff ? 1 : -1;
+
+ /* toggle complete-TS-streaming when:
+ * - pid_filtering is not enabled and it is the first or last feed requested
+ * - pid_filtering is enabled,
+ * - but the number of requested feeds is exceeded
+ * - or the requested pid is 0x2000 */
+
+ if (!fc->pid_filtering && fc->feedcount == onoff)
+ flexcop_toggle_fullts_streaming(fc,onoff);
+
+ if (fc->pid_filtering) {
+ flexcop_pid_control(fc,dvbdmxfeed->index,dvbdmxfeed->pid,onoff);
+
+ if (fc->extra_feedcount > 0)
+ flexcop_toggle_fullts_streaming(fc,1);
+ else if (dvbdmxfeed->pid == 0x2000)
+ flexcop_toggle_fullts_streaming(fc,onoff);
+ else
+ flexcop_toggle_fullts_streaming(fc,0);
+ }
+
+ /* if it was the first or last feed request change the stream-status */
+ if (fc->feedcount == onoff) {
+ flexcop_rcv_data_ctrl(fc,onoff);
+ if (fc->stream_control)
+ fc->stream_control(fc,onoff);
+ }
+
+ return 0;
+}
+
+void flexcop_hw_filter_init(struct flexcop_device *fc)
+{
+ int i;
+ flexcop_ibi_value v;
+ for (i = 0; i < 6 + 32*fc->has_32_hw_pid_filter; i++)
+ flexcop_pid_control(fc,i,0x1fff,0);
+
+ flexcop_pid_group_filter(fc, 0, 0x1fe0);
+ flexcop_pid_group_filter_ctrl(fc,0);
+
+ v = fc->read_ibi_reg(fc,pid_filter_308);
+ v.pid_filter_308.EMM_filter_4 = 1;
+ v.pid_filter_308.EMM_filter_6 = 0;
+ fc->write_ibi_reg(fc,pid_filter_308,v);
+
+ flexcop_null_filter_ctrl(fc, 1);
+}
diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c
new file mode 100644
index 0000000..be4266d
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -0,0 +1,210 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+#define FC_MAX_I2C_RETRIES 100000
+
+static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100)
+{
+ int i;
+ flexcop_ibi_value r;
+
+ r100->tw_sm_c_100.working_start = 1;
+ deb_i2c("r100 before: %08x\n",r100->raw);
+
+ fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero);
+ fc->write_ibi_reg(fc, tw_sm_c_100, *r100); /* initiating i2c operation */
+
+ for (i = 0; i < FC_MAX_I2C_RETRIES; i++) {
+ r = fc->read_ibi_reg(fc, tw_sm_c_100);
+
+ if (!r.tw_sm_c_100.no_base_addr_ack_error) {
+ if (r.tw_sm_c_100.st_done) { /* && !r.tw_sm_c_100.working_start */
+ *r100 = r;
+ deb_i2c("i2c success\n");
+ return 0;
+ }
+ } else {
+ deb_i2c("suffering from an i2c ack_error\n");
+ return -EREMOTEIO;
+ }
+ }
+ deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n",i);
+ return -EREMOTEIO;
+}
+
+static int flexcop_i2c_read4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf)
+{
+ flexcop_ibi_value r104;
+ int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
+ ret;
+
+ if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) {
+ /* The Cablestar needs a different kind of i2c-transfer (does not
+ * support "Repeat Start"):
+ * wait for the ACK failure,
+ * and do a subsequent read with the Bit 30 enabled
+ */
+ r100.tw_sm_c_100.no_base_addr_ack_error = 1;
+ if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) {
+ deb_i2c("no_base_addr read failed. %d\n",ret);
+ return ret;
+ }
+ }
+
+ buf[0] = r100.tw_sm_c_100.data1_reg;
+
+ if (len > 0) {
+ r104 = fc->read_ibi_reg(fc,tw_sm_c_104);
+ deb_i2c("read: r100: %08x, r104: %08x\n",r100.raw,r104.raw);
+
+ /* there is at least one more byte, otherwise we wouldn't be here */
+ buf[1] = r104.tw_sm_c_104.data2_reg;
+ if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg;
+ if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg;
+ }
+
+ return 0;
+}
+
+static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf)
+{
+ flexcop_ibi_value r104;
+ int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */
+ r104.raw = 0;
+
+ /* there is at least one byte, otherwise we wouldn't be here */
+ r100.tw_sm_c_100.data1_reg = buf[0];
+
+ r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0;
+ r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0;
+ r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0;
+
+ deb_i2c("write: r100: %08x, r104: %08x\n",r100.raw,r104.raw);
+
+ /* write the additional i2c data before doing the actual i2c operation */
+ fc->write_ibi_reg(fc,tw_sm_c_104,r104);
+ return flexcop_i2c_operation(fc,&r100);
+}
+
+int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op,
+ flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len)
+{
+ int ret;
+ u16 bytes_to_transfer;
+ flexcop_ibi_value r100;
+
+ deb_i2c("op = %d\n",op);
+ r100.raw = 0;
+ r100.tw_sm_c_100.chipaddr = chipaddr;
+ r100.tw_sm_c_100.twoWS_rw = op;
+ r100.tw_sm_c_100.twoWS_port_reg = port;
+
+ while (len != 0) {
+ bytes_to_transfer = len > 4 ? 4 : len;
+
+ r100.tw_sm_c_100.total_bytes = bytes_to_transfer - 1;
+ r100.tw_sm_c_100.baseaddr = addr;
+
+ if (op == FC_READ)
+ ret = flexcop_i2c_read4(fc, r100, buf);
+ else
+ ret = flexcop_i2c_write4(fc,r100, buf);
+
+ if (ret < 0)
+ return ret;
+
+ buf += bytes_to_transfer;
+ addr += bytes_to_transfer;
+ len -= bytes_to_transfer;
+ };
+
+ return 0;
+}
+/* exported for PCI i2c */
+EXPORT_SYMBOL(flexcop_i2c_request);
+
+/* master xfer callback for demodulator */
+static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
+{
+ struct flexcop_device *fc = i2c_get_adapdata(i2c_adap);
+ int i, ret = 0;
+
+ if (down_interruptible(&fc->i2c_sem))
+ return -ERESTARTSYS;
+
+ /* reading */
+ if (num == 2 &&
+ msgs[0].flags == 0 &&
+ msgs[1].flags == I2C_M_RD &&
+ msgs[0].buf != NULL &&
+ msgs[1].buf != NULL) {
+
+ ret = fc->i2c_request(fc, FC_READ, FC_I2C_PORT_DEMOD, msgs[0].addr, msgs[0].buf[0], msgs[1].buf, msgs[1].len);
+
+ } else for (i = 0; i < num; i++) { /* writing command */
+ if (msgs[i].flags != 0 || msgs[i].buf == NULL || msgs[i].len < 2) {
+ ret = -EINVAL;
+ break;
+ }
+
+ ret = fc->i2c_request(fc, FC_WRITE, FC_I2C_PORT_DEMOD, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1);
+ }
+
+ if (ret < 0)
+ err("i2c master_xfer failed");
+ else
+ ret = num;
+
+ up(&fc->i2c_sem);
+
+ return ret;
+}
+
+static u32 flexcop_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm flexcop_algo = {
+ .name = "FlexCop I2C algorithm",
+ .id = I2C_ALGO_BIT,
+ .master_xfer = flexcop_master_xfer,
+ .functionality = flexcop_i2c_func,
+};
+
+int flexcop_i2c_init(struct flexcop_device *fc)
+{
+ int ret;
+
+ sema_init(&fc->i2c_sem,1);
+
+ memset(&fc->i2c_adap, 0, sizeof(struct i2c_adapter));
+ strncpy(fc->i2c_adap.name, "B2C2 FlexCop device",I2C_NAME_SIZE);
+
+ i2c_set_adapdata(&fc->i2c_adap,fc);
+
+ fc->i2c_adap.class = I2C_CLASS_TV_DIGITAL;
+ fc->i2c_adap.algo = &flexcop_algo;
+ fc->i2c_adap.algo_data = NULL;
+ fc->i2c_adap.id = I2C_ALGO_BIT;
+
+ if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0)
+ return ret;
+
+ fc->init_state |= FC_STATE_I2C_INIT;
+ return 0;
+}
+
+void flexcop_i2c_exit(struct flexcop_device *fc)
+{
+ if (fc->init_state & FC_STATE_I2C_INIT)
+ i2c_del_adapter(&fc->i2c_adap);
+
+ fc->init_state &= ~FC_STATE_I2C_INIT;
+}
diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c
new file mode 100644
index 0000000..19e06da
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-misc.c
@@ -0,0 +1,66 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-misc.c - miscellaneous functions.
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+void flexcop_determine_revision(struct flexcop_device *fc)
+{
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204);
+
+ switch (v.misc_204.Rev_N_sig_revision_hi) {
+ case 0x2:
+ deb_info("found a FlexCopII.\n");
+ fc->rev = FLEXCOP_II;
+ break;
+ case 0x3:
+ deb_info("found a FlexCopIIb.\n");
+ fc->rev = FLEXCOP_IIB;
+ break;
+ case 0x0:
+ deb_info("found a FlexCopIII.\n");
+ fc->rev = FLEXCOP_III;
+ break;
+ default:
+ err("unkown FlexCop Revision: %x. Please report the linux-dvb@linuxtv.org.",v.misc_204.Rev_N_sig_revision_hi);
+ break;
+ }
+
+ if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps))
+ deb_info("this FlexCop has the additional 32 hardware pid filter.\n");
+ else
+ deb_info("this FlexCop has only the 6 basic main hardware pid filter.\n");
+ /* bus parts have to decide if hw pid filtering is used or not. */
+}
+
+const char *flexcop_revision_names[] = {
+ "Unkown chip",
+ "FlexCopII",
+ "FlexCopIIb",
+ "FlexCopIII",
+};
+
+const char *flexcop_device_names[] = {
+ "Unkown device",
+ "AirStar 2 DVB-T",
+ "AirStar 2 ATSC",
+ "SkyStar 2 DVB-S",
+ "SkyStar 2 DVB-S (old version)",
+ "CableStar 2 DVB-C",
+};
+
+const char *flexcop_bus_names[] = {
+ "USB",
+ "PCI",
+};
+
+void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const
+ char *suffix)
+{
+ info("%s '%s' at the '%s' bus controlled by a '%s' %s",prefix,
+ flexcop_device_names[fc->dev_type],flexcop_bus_names[fc->bus_type],
+ flexcop_revision_names[fc->rev],suffix);
+}
diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c
new file mode 100644
index 0000000..ed717c0
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-pci.c
@@ -0,0 +1,381 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-pci.c - covers the PCI part including DMA transfers.
+ *
+ * see flexcop.c for copyright information.
+ */
+
+#define FC_LOG_PREFIX "flexcop-pci"
+#include "flexcop-common.h"
+
+static int enable_pid_filtering = 1;
+module_param(enable_pid_filtering, int, 0444);
+MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1");
+
+#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+#define dprintk(level,args...) \
+ do { if ((debug & level)) printk(args); } while (0)
+#define DEBSTATUS ""
+#else
+#define dprintk(level,args...)
+#define DEBSTATUS " (debugging is not enabled)"
+#endif
+
+#define deb_info(args...) dprintk(0x01,args)
+#define deb_reg(args...) dprintk(0x02,args)
+#define deb_ts(args...) dprintk(0x04,args)
+#define deb_irq(args...) dprintk(0x08,args)
+
+static int debug = 0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS);
+
+#define DRIVER_VERSION "0.1"
+#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
+#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
+
+struct flexcop_pci {
+ struct pci_dev *pdev;
+
+#define FC_PCI_INIT 0x01
+#define FC_PCI_DMA_INIT 0x02
+ int init_state;
+
+ void __iomem *io_mem;
+ u32 irq;
+/* buffersize (at least for DMA1, need to be % 188 == 0,
+ * this logic is required */
+#define FC_DEFAULT_DMA1_BUFSIZE (1280 * 188)
+#define FC_DEFAULT_DMA2_BUFSIZE (10 * 188)
+ struct flexcop_dma dma[2];
+
+ int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
+ u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */
+ int count;
+
+ spinlock_t irq_lock;
+
+ struct flexcop_device *fc_dev;
+};
+
+static int lastwreg,lastwval,lastrreg,lastrval;
+
+static flexcop_ibi_value flexcop_pci_read_ibi_reg (struct flexcop_device *fc, flexcop_ibi_register r)
+{
+ struct flexcop_pci *fc_pci = fc->bus_specific;
+ flexcop_ibi_value v;
+ v.raw = readl(fc_pci->io_mem + r);
+
+ if (lastrreg != r || lastrval != v.raw) {
+ lastrreg = r; lastrval = v.raw;
+ deb_reg("new rd: %3x: %08x\n",r,v.raw);
+ }
+
+ return v;
+}
+
+static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register r, flexcop_ibi_value v)
+{
+ struct flexcop_pci *fc_pci = fc->bus_specific;
+
+ if (lastwreg != r || lastwval != v.raw) {
+ lastwreg = r; lastwval = v.raw;
+ deb_reg("new wr: %3x: %08x\n",r,v.raw);
+ }
+
+ writel(v.raw, fc_pci->io_mem + r);
+ return 0;
+}
+
+/* When PID filtering is turned on, we use the timer IRQ, because small amounts
+ * of data need to be passed to the user space instantly as well. When PID
+ * filtering is turned off, we use the page-change-IRQ */
+static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct flexcop_pci *fc_pci = dev_id;
+ struct flexcop_device *fc = fc_pci->fc_dev;
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,irq_20c);
+ irqreturn_t ret = IRQ_HANDLED;
+
+ spin_lock_irq(&fc_pci->irq_lock);
+
+ if (v.irq_20c.DMA1_IRQ_Status == 1) {
+ if (fc_pci->active_dma1_addr == 0)
+ flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr0,fc_pci->dma[0].size / 188);
+ else
+ flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr1,fc_pci->dma[0].size / 188);
+
+ deb_irq("page change to page: %d\n",!fc_pci->active_dma1_addr);
+ fc_pci->active_dma1_addr = !fc_pci->active_dma1_addr;
+ } else if (v.irq_20c.DMA1_Timer_Status == 1) {
+ /* for the timer IRQ we only can use buffer dmx feeding, because we don't have
+ * complete TS packets when reading from the DMA memory */
+ dma_addr_t cur_addr =
+ fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
+ u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
+
+ deb_irq("irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ",
+ v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos);
+
+ /* buffer end was reached, restarted from the beginning
+ * pass the data from last_cur_pos to the buffer end to the demux
+ */
+ if (cur_pos < fc_pci->last_dma1_cur_pos) {
+ deb_irq(" end was reached: passing %d bytes ",(fc_pci->dma[0].size*2 - 1) - fc_pci->last_dma1_cur_pos);
+ flexcop_pass_dmx_data(fc_pci->fc_dev,
+ fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos,
+ (fc_pci->dma[0].size*2) - fc_pci->last_dma1_cur_pos);
+ fc_pci->last_dma1_cur_pos = 0;
+ fc_pci->count = 0;
+ }
+
+ if (cur_pos > fc_pci->last_dma1_cur_pos) {
+ deb_irq(" passing %d bytes ",cur_pos - fc_pci->last_dma1_cur_pos);
+ flexcop_pass_dmx_data(fc_pci->fc_dev,
+ fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos,
+ cur_pos - fc_pci->last_dma1_cur_pos);
+ }
+ deb_irq("\n");
+
+ fc_pci->last_dma1_cur_pos = cur_pos;
+ } else
+ ret = IRQ_NONE;
+
+ spin_unlock_irq(&fc_pci->irq_lock);
+
+/* packet count would be ideal for hw filtering, but it isn't working. Either
+ * the data book is wrong, or I'm unable to read it correctly */
+
+/* if (v.irq_20c.DMA1_Size_IRQ_Status == 1) { packet counter */
+
+ return ret;
+}
+
+static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff)
+{
+ struct flexcop_pci *fc_pci = fc->bus_specific;
+ if (onoff) {
+ flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1);
+ flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1);
+ flexcop_dma_config_timer(fc,FC_DMA_1,1);
+
+ if (fc_pci->fc_dev->pid_filtering) {
+ fc_pci->last_dma1_cur_pos = 0;
+ flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
+ } else {
+ fc_pci->active_dma1_addr = 0;
+ flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
+ }
+
+/* flexcop_dma_config_packet_count(fc,FC_DMA_1,0xc0);
+ flexcop_dma_control_packet_irq(fc,FC_DMA_1,1); */
+
+ deb_irq("irqs enabled\n");
+ } else {
+ if (fc_pci->fc_dev->pid_filtering)
+ flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
+ else
+ flexcop_dma_control_size_irq(fc,FC_DMA_1,0);
+
+// flexcop_dma_control_packet_irq(fc,FC_DMA_1,0);
+ deb_irq("irqs disabled\n");
+ }
+
+ return 0;
+}
+
+static int flexcop_pci_dma_init(struct flexcop_pci *fc_pci)
+{
+ int ret;
+ if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[0],FC_DEFAULT_DMA1_BUFSIZE)) != 0)
+ return ret;
+
+ if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[1],FC_DEFAULT_DMA2_BUFSIZE)) != 0)
+ goto dma1_free;
+
+ flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_MEDIA | FC_SRAM_DEST_NET, FC_SRAM_DEST_TARGET_DMA1);
+ flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2);
+
+ fc_pci->init_state |= FC_PCI_DMA_INIT;
+ goto success;
+dma1_free:
+ flexcop_dma_free(&fc_pci->dma[0]);
+
+success:
+ return ret;
+}
+
+static void flexcop_pci_dma_exit(struct flexcop_pci *fc_pci)
+{
+ if (fc_pci->init_state & FC_PCI_DMA_INIT) {
+ flexcop_dma_free(&fc_pci->dma[0]);
+ flexcop_dma_free(&fc_pci->dma[1]);
+ }
+ fc_pci->init_state &= ~FC_PCI_DMA_INIT;
+}
+
+static int flexcop_pci_init(struct flexcop_pci *fc_pci)
+{
+ int ret;
+ u8 card_rev;
+
+ pci_read_config_byte(fc_pci->pdev, PCI_CLASS_REVISION, &card_rev);
+ info("card revision %x", card_rev);
+
+ if ((ret = pci_enable_device(fc_pci->pdev)) != 0)
+ return ret;
+
+ pci_set_master(fc_pci->pdev);
+
+ /* enable interrupts */
+ // pci_write_config_dword(pdev, 0x6c, 0x8000);
+
+ if ((ret = pci_request_regions(fc_pci->pdev, DRIVER_NAME)) != 0)
+ goto err_pci_disable_device;
+
+ fc_pci->io_mem = pci_iomap(fc_pci->pdev, 0, 0x800);
+
+ if (!fc_pci->io_mem) {
+ err("cannot map io memory\n");
+ ret = -EIO;
+ goto err_pci_release_regions;
+ }
+
+ pci_set_drvdata(fc_pci->pdev, fc_pci);
+
+ if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_irq,
+ SA_SHIRQ, DRIVER_NAME, fc_pci)) != 0)
+ goto err_pci_iounmap;
+
+ spin_lock_init(&fc_pci->irq_lock);
+
+ fc_pci->init_state |= FC_PCI_INIT;
+ goto success;
+
+err_pci_iounmap:
+ pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
+ pci_set_drvdata(fc_pci->pdev, NULL);
+err_pci_release_regions:
+ pci_release_regions(fc_pci->pdev);
+err_pci_disable_device:
+ pci_disable_device(fc_pci->pdev);
+
+success:
+ return ret;
+}
+
+static void flexcop_pci_exit(struct flexcop_pci *fc_pci)
+{
+ if (fc_pci->init_state & FC_PCI_INIT) {
+ free_irq(fc_pci->pdev->irq, fc_pci);
+ pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
+ pci_set_drvdata(fc_pci->pdev, NULL);
+ pci_release_regions(fc_pci->pdev);
+ pci_disable_device(fc_pci->pdev);
+ }
+ fc_pci->init_state &= ~FC_PCI_INIT;
+}
+
+
+static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct flexcop_device *fc;
+ struct flexcop_pci *fc_pci;
+ int ret = -ENOMEM;
+
+ if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_pci))) == NULL) {
+ err("out of memory\n");
+ return -ENOMEM;
+ }
+
+/* general flexcop init */
+ fc_pci = fc->bus_specific;
+ fc_pci->fc_dev = fc;
+
+ fc->read_ibi_reg = flexcop_pci_read_ibi_reg;
+ fc->write_ibi_reg = flexcop_pci_write_ibi_reg;
+ fc->i2c_request = flexcop_i2c_request;
+ fc->get_mac_addr = flexcop_eeprom_check_mac_addr;
+
+ fc->stream_control = flexcop_pci_stream_control;
+
+ if (enable_pid_filtering)
+ info("will use the HW PID filter.");
+ else
+ info("will pass the complete TS to the demuxer.");
+
+ fc->pid_filtering = enable_pid_filtering;
+ fc->bus_type = FC_PCI;
+
+ fc->dev = &pdev->dev;
+ fc->owner = THIS_MODULE;
+
+/* bus specific part */
+ fc_pci->pdev = pdev;
+ if ((ret = flexcop_pci_init(fc_pci)) != 0)
+ goto err_kfree;
+
+/* init flexcop */
+ if ((ret = flexcop_device_initialize(fc)) != 0)
+ goto err_pci_exit;
+
+/* init dma */
+ if ((ret = flexcop_pci_dma_init(fc_pci)) != 0)
+ goto err_fc_exit;
+
+ goto success;
+err_fc_exit:
+ flexcop_device_exit(fc);
+err_pci_exit:
+ flexcop_pci_exit(fc_pci);
+err_kfree:
+ flexcop_device_kfree(fc);
+success:
+ return ret;
+}
+
+/* in theory every _exit function should be called exactly two times,
+ * here and in the bail-out-part of the _init-function
+ */
+static void flexcop_pci_remove(struct pci_dev *pdev)
+{
+ struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
+
+ flexcop_pci_dma_exit(fc_pci);
+ flexcop_device_exit(fc_pci->fc_dev);
+ flexcop_pci_exit(fc_pci);
+ flexcop_device_kfree(fc_pci->fc_dev);
+}
+
+static struct pci_device_id flexcop_pci_tbl[] = {
+ { PCI_DEVICE(0x13d0, 0x2103) },
+/* { PCI_DEVICE(0x13d0, 0x2200) }, PCI FlexCopIII ? */
+ { },
+};
+
+MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl);
+
+static struct pci_driver flexcop_pci_driver = {
+ .name = "Technisat/B2C2 FlexCop II/IIb/III PCI",
+ .id_table = flexcop_pci_tbl,
+ .probe = flexcop_pci_probe,
+ .remove = flexcop_pci_remove,
+};
+
+static int __init flexcop_pci_module_init(void)
+{
+ return pci_register_driver(&flexcop_pci_driver);
+}
+
+static void __exit flexcop_pci_module_exit(void)
+{
+ pci_unregister_driver(&flexcop_pci_driver);
+}
+
+module_init(flexcop_pci_module_init);
+module_exit(flexcop_pci_module_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_NAME);
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h
new file mode 100644
index 0000000..5e131be
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-reg.h
@@ -0,0 +1,701 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-reg.h - register abstraction for FlexCopII, FlexCopIIb and FlexCopIII
+ *
+ * see flexcop.c for copyright information.
+ */
+#ifndef __FLEXCOP_REG_H__
+#define __FLEXCOP_REG_H__
+
+
+typedef enum {
+ FLEXCOP_UNK = 0,
+ FLEXCOP_II,
+ FLEXCOP_IIB,
+ FLEXCOP_III,
+} flexcop_revision_t;
+
+extern const char *flexcop_revision_names[];
+
+typedef enum {
+ FC_UNK = 0,
+ FC_AIR_DVB,
+ FC_AIR_ATSC,
+ FC_SKY,
+ FC_SKY_OLD,
+ FC_CABLE,
+} flexcop_device_type_t;
+
+typedef enum {
+ FC_USB = 0,
+ FC_PCI,
+} flexcop_bus_t;
+
+extern const char *flexcop_device_names[];
+
+/* FlexCop IBI Registers */
+
+/* flexcop_ibi_reg - a huge union representing the register structure */
+typedef union {
+ u32 raw;
+
+/* DMA 0x000 to 0x01c
+ * DMA1 0x000 to 0x00c
+ * DMA2 0x010 to 0x01c
+ */
+ struct {
+ u32 dma_0start : 1; /* set: data will be delivered to dma1_address0 */
+ u32 dma_0No_update : 1; /* set: dma1_cur_address will be updated, unset: no update */
+ u32 dma_address0 :30; /* physical/virtual host memory address0 DMA */
+ } dma_0x0;
+
+ struct {
+ u32 DMA_maxpackets : 8; /* (remapped) PCI DMA1 Packet Count Interrupt. This variable
+ is able to be read and written while bit(1) of register
+ 0x00c (remap_enable) is set. This variable represents
+ the number of packets that will be transmitted to the PCI
+ host using PCI DMA1 before an interrupt to the PCI is
+ asserted. This functionality may be enabled using bit(20)
+ of register 0x208. N=0 disables the IRQ. */
+ u32 dma_addr_size :24; /* size of memory buffer in DWORDs (bytesize / 4) for DMA */
+ } dma_0x4_remap;
+
+ struct {
+ u32 dma1timer : 7; /* reading PCI DMA1 timer ... when remap_enable is 0 */
+ u32 unused : 1;
+ u32 dma_addr_size :24;
+ } dma_0x4_read;
+
+ struct {
+ u32 unused : 1;
+ u32 dmatimer : 7; /* writing PCI DMA1 timer ... when remap_enable is 0 */
+ u32 dma_addr_size :24;
+ } dma_0x4_write;
+
+ struct {
+ u32 unused : 2;
+ u32 dma_cur_addr :30; /* current physical host memory address pointer for DMA */
+ } dma_0x8;
+
+ struct {
+ u32 dma_1start : 1; /* set: data will be delivered to dma_address1, when dma_address0 is full */
+ u32 remap_enable : 1; /* remap enable for 0x0x4(7:0) */
+ u32 dma_address1 :30; /* Physical/virtual address 1 on DMA */
+ } dma_0xc;
+
+/* Two-wire Serial Master and Clock 0x100-0x110 */
+ struct {
+// u32 slave_transmitter : 1; /* ???*/
+ u32 chipaddr : 7; /* two-line serial address of the target slave */
+ u32 reserved1 : 1;
+ u32 baseaddr : 8; /* address of the location of the read/write operation */
+ u32 data1_reg : 8; /* first byte in two-line serial read/write operation */
+ u32 working_start : 1; /* when doing a write operation this indicator is 0 when ready
+ * set to 1 when doing a write operation */
+ u32 twoWS_rw : 1; /* read/write indicator (1 = read, 0 write) */
+ u32 total_bytes : 2; /* number of data bytes in each two-line serial transaction (0 = 1 byte, 11 = 4byte)*/
+ u32 twoWS_port_reg : 2; /* port selection: 01 - Front End/Demod, 10 - EEPROM, 11 - Tuner */
+ u32 no_base_addr_ack_error : 1; /* writing: write-req: frame is produced w/o baseaddr, read-req: read-cycles w/o
+ * preceding address assignment write frame
+ * ACK_ERROR = 1 when no ACK from slave in the last transaction */
+ u32 st_done : 1; /* indicator for transaction is done */
+ } tw_sm_c_100;
+
+ struct {
+ u32 data2_reg : 8; /* 2nd data byte */
+ u32 data3_reg : 8; /* 3rd data byte */
+ u32 data4_reg : 8; /* 4th data byte */
+ u32 exlicit_stops : 1; /* when set, transactions are produced w/o trailing STOP flag, then send isolated STOP flags */
+ u32 force_stop : 1; /* isolated stop flag */
+ u32 unused : 6;
+ } tw_sm_c_104;
+
+/* Clock. The register allows the FCIII to convert an incoming Master clock
+ * (MCLK) signal into a lower frequency clock through the use of a LowCounter
+ * (TLO) and a High- Counter (THI). The time counts for THI and TLO are
+ * measured in MCLK; each count represents 4 MCLK input clock cycles.
+ *
+ * The default output for port #1 is set for Front End Demod communication. (0x108)
+ * The default output for port #2 is set for EEPROM communication. (0x10c)
+ * The default output for port #3 is set for Tuner communication. (0x110)
+ */
+ struct {
+ u32 thi1 : 6; /* Thi for port #1 (def: 100110b; 38) */
+ u32 reserved1 : 2;
+ u32 tlo1 : 5; /* Tlo for port #1 (def: 11100b; 28) */
+ u32 reserved2 :19;
+ } tw_sm_c_108;
+
+ struct {
+ u32 thi1 : 6; /* Thi for port #2 (def: 111001b; 57) */
+ u32 reserved1 : 2;
+ u32 tlo1 : 5; /* Tlo for port #2 (def: 11100b; 28) */
+ u32 reserved2 :19;
+ } tw_sm_c_10c;
+
+ struct {
+ u32 thi1 : 6; /* Thi for port #3 (def: 111001b; 57) */
+ u32 reserved1 : 2;
+ u32 tlo1 : 5; /* Tlo for port #3 (def: 11100b; 28) */
+ u32 reserved2 :19;
+ } tw_sm_c_110;
+
+/* LNB Switch Frequency 0x200
+ * Clock that creates the LNB switch tone. The default is set to have a fixed
+ * low output (not oscillating) to the LNB_CTL line.
+ */
+ struct {
+ u32 LNB_CTLHighCount_sig :15; /* It is the number of pre-scaled clock cycles that will be low. */
+ u32 LNB_CTLLowCount_sig :15; /* For example, to obtain a 22KHz output given a 45 Mhz Master
+ Clock signal (MCLK), set PreScalar=01 and LowCounter value to 0x1ff. */
+ u32 LNB_CTLPrescaler_sig : 2; /* pre-scaler divides MCLK: 00 (no division), 01 by 2, 10 by 4, 11 by 12 */
+ } lnb_switch_freq_200;
+
+/* ACPI, Peripheral Reset, LNB Polarity
+ * ACPI power conservation mode, LNB polarity selection (low or high voltage),
+ * and peripheral reset.
+ */
+ struct {
+ u32 ACPI1_sig : 1; /* turn of the power of tuner and LNB, not implemented in FCIII */
+ u32 ACPI3_sig : 1; /* turn of power of the complete satelite receiver board (except FCIII) */
+ u32 LNB_L_H_sig : 1; /* low or high voltage for LNB. (0 = low, 1 = high) */
+ u32 Per_reset_sig : 1; /* misc. init reset (default: 1), to reset set to low and back to high */
+ u32 reserved :20;
+ u32 Rev_N_sig_revision_hi : 4;/* 0xc in case of FCIII */
+ u32 Rev_N_sig_reserved1 : 2;
+ u32 Rev_N_sig_caps : 1; /* if 1, FCIII has 32 PID- and MAC-filters and is capable of IP multicast */
+ u32 Rev_N_sig_reserved2 : 1;
+ } misc_204;
+
+/* Control and Status 0x208 to 0x21c */
+/* Gross enable and disable control */
+ struct {
+ u32 Stream1_filter_sig : 1; /* Stream1 PID filtering */
+ u32 Stream2_filter_sig : 1; /* Stream2 PID filtering */
+ u32 PCR_filter_sig : 1; /* PCR PID filter */
+ u32 PMT_filter_sig : 1; /* PMT PID filter */
+
+ u32 EMM_filter_sig : 1; /* EMM PID filter */
+ u32 ECM_filter_sig : 1; /* ECM PID filter */
+ u32 Null_filter_sig : 1; /* Filters null packets, PID=0x1fff. */
+ u32 Mask_filter_sig : 1; /* mask PID filter */
+
+ u32 WAN_Enable_sig : 1; /* WAN output line through V8 memory space is activated. */
+ u32 WAN_CA_Enable_sig : 1; /* not in FCIII */
+ u32 CA_Enable_sig : 1; /* not in FCIII */
+ u32 SMC_Enable_sig : 1; /* CI stream data (CAI) goes directly to the smart card intf (opposed IBI 0x600 or SC-cmd buf). */
+
+ u32 Per_CA_Enable_sig : 1; /* not in FCIII */
+ u32 Multi2_Enable_sig : 1; /* ? */
+ u32 MAC_filter_Mode_sig : 1; /* (MAC_filter_enable) Globally enables MAC filters for Net PID filteres. */
+ u32 Rcv_Data_sig : 1; /* PID filtering module enable. When this bit is a one, the PID filter will
+ examine and process packets according to all other (individual) PID
+ filtering controls. If it a zero, no packet processing of any kind will
+ take place. All data from the tuner will be thrown away. */
+
+ u32 DMA1_IRQ_Enable_sig : 1; /* When set, a DWORD counter is enabled on PCI DMA1 that asserts the PCI
+ * interrupt after the specified count for filling the buffer. */
+ u32 DMA1_Timer_Enable_sig : 1; /* When set, a timer is enabled on PCI DMA1 that asserts the PCI interrupt
+ after a specified amount of time. */
+ u32 DMA2_IRQ_Enable_sig : 1; /* same as DMA1_IRQ_Enable_sig but for DMA2 */
+ u32 DMA2_Timer_Enable_sig : 1; /* same as DMA1_Timer_Enable_sig but for DMA2 */
+
+ u32 DMA1_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA1 that asserts the PCI interrupt. */
+ u32 DMA2_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA2 that asserts the PCI interrupt. */
+ u32 Mailbox_from_V8_Enable_sig: 1; /* When set, writes to the mailbox register produce an interrupt to the
+ PCI host to indicate that mailbox data is available. */
+
+ u32 unused : 9;
+ } ctrl_208;
+
+/* General status. When a PCI interrupt occurs, this register is read to
+ * discover the reason for the interrupt.
+ */
+ struct {
+ u32 DMA1_IRQ_Status : 1; /* When set(1) the DMA1 counter had generated an IRQ. Read Only. */
+ u32 DMA1_Timer_Status : 1; /* When set(1) the DMA1 timer had generated an IRQ. Read Only. */
+ u32 DMA2_IRQ_Status : 1; /* When set(1) the DMA2 counter had generated an IRQ. Read Only. */
+ u32 DMA2_Timer_Status : 1; /* When set(1) the DMA2 timer had generated an IRQ. Read Only. */
+ u32 DMA1_Size_IRQ_Status : 1; /* (Read only). This register is read after an interrupt to */
+ u32 DMA2_Size_IRQ_Status : 1; /* find out why we had an IRQ. Reading this register will clear this bit. Packet count*/
+ u32 Mailbox_from_V8_Status_sig: 1; /* Same as above. Reading this register will clear this bit. */
+ u32 Data_receiver_error : 1; /* 1 indicate an error in the receiver Front End (Tuner module) */
+ u32 Continuity_error_flag : 1; /* 1 indicates a continuity error in the TS stream. */
+ u32 LLC_SNAP_FLAG_set : 1; /* 1 indicates that the LCC_SNAP_FLAG was set. */
+ u32 Transport_Error : 1; /* When set indicates that an unexpected packet was received. */
+ u32 reserved :21;
+ } irq_20c;
+
+
+/* Software reset register */
+ struct {
+ u32 reset_blocks : 8; /* Enabled when Block_reset_enable = 0xB2 and 0x208 bits 15:8 = 0x00.
+ Each bit location represents a 0x100 block of registers. Writing
+ a one in a bit location resets that block of registers and the logic
+ that it controls. */
+ u32 Block_reset_enable : 8; /* This variable is set to 0xB2 when the register is written. */
+ u32 Special_controls :16; /* Asserts Reset_V8 => 0xC258; Turns on pci encryption => 0xC25A;
+ Turns off pci encryption => 0xC259 Note: pci_encryption default
+ at power-up is ON. */
+ } sw_reset_210;
+
+ struct {
+ u32 vuart_oe_sig : 1; /* When clear, the V8 processor has sole control of the serial UART
+ (RS-232 Smart Card interface). When set, the IBI interface
+ defined by register 0x600 controls the serial UART. */
+ u32 v2WS_oe_sig : 1; /* When clear, the V8 processor has direct control of the Two-line
+ Serial Master EEPROM target. When set, the Two-line Serial Master
+ EEPROM target interface is controlled by IBI register 0x100. */
+ u32 halt_V8_sig : 1; /* When set, contiguous wait states are applied to the V8-space
+ bus masters. Once this signal is cleared, normal V8-space
+ operations resume. */
+ u32 section_pkg_enable_sig: 1; /* When set, this signal enables the front end translation circuitry
+ to process section packed transport streams. */
+ u32 s2p_sel_sig : 1; /* Serial to parallel conversion. When set, polarized transport data
+ within the FlexCop3 front end circuitry is converted from a serial
+ stream into parallel data before downstream processing otherwise
+ interprets the data. */
+ u32 unused1 : 3;
+ u32 polarity_PS_CLK_sig: 1; /* This signal is used to invert the input polarity of the tranport
+ stream CLOCK signal before any processing occurs on the transport
+ stream within FlexCop3. */
+ u32 polarity_PS_VALID_sig: 1; /* This signal is used to invert the input polarity of the tranport
+ stream VALID signal before any processing occurs on the transport
+ stream within FlexCop3. */
+ u32 polarity_PS_SYNC_sig: 1; /* This signal is used to invert the input polarity of the tranport
+ stream SYNC signal before any processing occurs on the transport
+ stream within FlexCop3. */
+ u32 polarity_PS_ERR_sig: 1; /* This signal is used to invert the input polarity of the tranport
+ stream ERROR signal before any processing occurs on the transport
+ stream within FlexCop3. */
+ u32 unused2 :20;
+ } misc_214;
+
+/* Mailbox from V8 to host */
+ struct {
+ u32 Mailbox_from_V8 :32; /* When this register is written by either the V8 processor or by an
+ end host, an interrupt is generated to the PCI host to indicate
+ that mailbox data is available. Reading register 20c will clear
+ the IRQ. */
+ } mbox_v8_to_host_218;
+
+/* Mailbox from host to v8 Mailbox_to_V8
+ * Mailbox_to_V8 mailbox storage register
+ * used to send messages from PCI to V8. Writing to this register will send an
+ * IRQ to the V8. Then it can read the data from here. Reading this register
+ * will clear the IRQ. If the V8 is halted and bit 31 of this register is set,
+ * then this register is used instead as a direct interface to access the
+ * V8space memory.
+ */
+ struct {
+ u32 sysramaccess_data : 8; /* Data byte written or read from the specified address in V8 SysRAM. */
+ u32 sysramaccess_addr :15; /* 15 bit address used to access V8 Sys-RAM. */
+ u32 unused : 7;
+ u32 sysramaccess_write: 1; /* Write flag used to latch data into the V8 SysRAM. */
+ u32 sysramaccess_busmuster: 1; /* Setting this bit when the V8 is halted at 0x214 Bit(2) allows
+ this IBI register interface to directly drive the V8-space memory. */
+ } mbox_host_to_v8_21c;
+
+
+/* PIDs, Translation Bit, SMC Filter Select 0x300 to 0x31c */
+ struct {
+ u32 Stream1_PID :13; /* Primary use is receiving Net data, so these 13 bits normally
+ hold the PID value for the desired network stream. */
+ u32 Stream1_trans : 1; /* When set, Net translation will take place for Net data ferried in TS packets. */
+ u32 MAC_Multicast_filter : 1; /* When clear, multicast MAC filtering is not allowed for Stream1 and PID_n filters. */
+ u32 debug_flag_pid_saved : 1;
+ u32 Stream2_PID :13; /* 13 bits for Stream 2 PID filter value. General use. */
+ u32 Stream2_trans : 1; /* When set Tables/CAI translation will take place for the data ferried in
+ Stream2_PID TS packets. */
+ u32 debug_flag_write_status00 : 1;
+ u32 debug_fifo_problem : 1;
+ } pid_filter_300;
+
+ struct {
+ u32 PCR_PID :13; /* PCR stream PID filter value. Primary use is Program Clock Reference stream filtering. */
+ u32 PCR_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */
+ u32 debug_overrun3 : 1;
+ u32 debug_overrun2 : 1;
+ u32 PMT_PID :13; /* stream PID filter value. Primary use is Program Management Table segment filtering. */
+ u32 PMT_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */
+ u32 reserved : 2;
+ } pid_filter_304;
+
+ struct {
+ u32 EMM_PID :13; /* EMM PID filter value. Primary use is Entitlement Management Messaging for
+ conditional access-related data. */
+ u32 EMM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */
+ u32 EMM_filter_4 : 1; /* When set will pass only EMM data possessing the same ID code as the
+ first four bytes (32 bits) of the end-user s 6-byte Smart Card ID number Select */
+ u32 EMM_filter_6 : 1; /* When set will pass only EMM data possessing the same 6-byte code as the end-users
+ complete 6-byte Smart Card ID number. */
+ u32 ECM_PID :13; /* ECM PID filter value. Primary use is Entitlement Control Messaging for conditional
+ access-related data. */
+ u32 ECM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */
+ u32 reserved : 2;
+ } pid_filter_308;
+
+ struct {
+ u32 Group_PID :13; /* PID value for group filtering. */
+ u32 Group_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */
+ u32 unused1 : 2;
+ u32 Group_mask :13; /* Mask value used in logical "and" equation that defines group filtering */
+ u32 unused2 : 3;
+ } pid_filter_30c_ext_ind_0_7;
+
+ struct {
+ u32 net_master_read :17;
+ u32 unused :15;
+ } pid_filter_30c_ext_ind_1;
+
+ struct {
+ u32 net_master_write :17;
+ u32 unused :15;
+ } pid_filter_30c_ext_ind_2;
+
+ struct {
+ u32 next_net_master_write :17;
+ u32 unused :15;
+ } pid_filter_30c_ext_ind_3;
+
+ struct {
+ u32 unused1 : 1;
+ u32 state_write :10;
+ u32 reserved1 : 6; /* default: 000100 */
+ u32 stack_read :10;
+ u32 reserved2 : 5; /* default: 00100 */
+ } pid_filter_30c_ext_ind_4;
+
+ struct {
+ u32 stack_cnt :10;
+ u32 unused :22;
+ } pid_filter_30c_ext_ind_5;
+
+ struct {
+ u32 pid_fsm_save_reg0 : 2;
+ u32 pid_fsm_save_reg1 : 2;
+ u32 pid_fsm_save_reg2 : 2;
+ u32 pid_fsm_save_reg3 : 2;
+ u32 pid_fsm_save_reg4 : 2;
+ u32 pid_fsm_save_reg300 : 2;
+ u32 write_status1 : 2;
+ u32 write_status4 : 2;
+ u32 data_size_reg :12;
+ u32 unused : 4;
+ } pid_filter_30c_ext_ind_6;
+
+ struct {
+ u32 index_reg : 5; /* (Index pointer) Points at an internal PIDn register. A binary code
+ representing one of 32 internal PIDn registers as well as its
+ corresponding internal MAC_lown register. */
+ u32 extra_index_reg : 3; /* This vector is used to select between sets of debug signals routed to register 0x30c. */
+ u32 AB_select : 1; /* Used in conjunction with 0x31c. read/write to the MAC_highA or MAC_highB register
+ 0=MAC_highB register, 1=MAC_highA */
+ u32 pass_alltables : 1; /* 1=Net packets are not filtered against the Network Table ID found in register 0x400.
+ All types of networks (DVB, ATSC, ISDB) are passed. */
+ u32 unused :22;
+ } index_reg_310;
+
+ struct {
+ u32 PID :13; /* PID value */
+ u32 PID_trans : 1; /* translation will take place for packets filtered */
+ u32 PID_enable_bit : 1; /* When set this PID filter is enabled */
+ u32 reserved :17;
+ } pid_n_reg_314;
+
+ struct {
+ u32 A4_byte : 8;
+ u32 A5_byte : 8;
+ u32 A6_byte : 8;
+ u32 Enable_bit : 1; /* enabled (1) or disabled (1) */
+ u32 HighAB_bit : 1; /* use MAC_highA (1) or MAC_highB (0) as MSB */
+ u32 reserved : 6;
+ } mac_low_reg_318;
+
+ struct {
+ u32 A1_byte : 8;
+ u32 A2_byte : 8;
+ u32 A3_byte : 8;
+ u32 reserved : 8;
+ } mac_high_reg_31c;
+
+/* Table, SMCID,MACDestination Filters 0x400 to 0x41c */
+ struct {
+ u32 reserved :16;
+#define fc_data_Tag_ID_DVB 0x3e
+#define fc_data_Tag_ID_ATSC 0x3f
+#define fc_data_Tag_ID_IDSB 0x8b
+ u32 data_Tag_ID :16;
+ } data_tag_400;
+
+ struct {
+ u32 Card_IDbyte6 : 8;
+ u32 Card_IDbyte5 : 8;
+ u32 Card_IDbyte4 : 8;
+ u32 Card_IDbyte3 : 8;
+ } card_id_408;
+
+ struct {
+ u32 Card_IDbyte2 : 8;
+ u32 Card_IDbyte1 : 8;
+ } card_id_40c;
+
+ /* holding the unique mac address of the receiver which houses the FlexCopIII */
+ struct {
+ u32 MAC1 : 8;
+ u32 MAC2 : 8;
+ u32 MAC3 : 8;
+ u32 MAC6 : 8;
+ } mac_address_418;
+
+ struct {
+ u32 MAC7 : 8;
+ u32 MAC8 : 8;
+ u32 reserved : 16;
+ } mac_address_41c;
+
+ struct {
+ u32 transmitter_data_byte : 8;
+ u32 ReceiveDataReady : 1;
+ u32 ReceiveByteFrameError: 1;
+ u32 txbuffempty : 1;
+ u32 reserved :21;
+ } ci_600;
+
+ struct {
+ u32 pi_d : 8;
+ u32 pi_ha :20;
+ u32 pi_rw : 1;
+ u32 pi_component_reg : 3;
+ } pi_604;
+
+ struct {
+ u32 serialReset : 1;
+ u32 oncecycle_read : 1;
+ u32 Timer_Read_req : 1;
+ u32 Timer_Load_req : 1;
+ u32 timer_data : 7;
+ u32 unused : 1; /* ??? not mentioned in data book */
+ u32 Timer_addr : 5;
+ u32 reserved : 3;
+ u32 pcmcia_a_mod_pwr_n : 1;
+ u32 pcmcia_b_mod_pwr_n : 1;
+ u32 config_Done_stat : 1;
+ u32 config_Init_stat : 1;
+ u32 config_Prog_n : 1;
+ u32 config_wr_n : 1;
+ u32 config_cs_n : 1;
+ u32 config_cclk : 1;
+ u32 pi_CiMax_IRQ_n : 1;
+ u32 pi_timeout_status : 1;
+ u32 pi_wait_n : 1;
+ u32 pi_busy_n : 1;
+ } pi_608;
+
+ struct {
+ u32 PID :13;
+ u32 key_enable : 1;
+#define fc_key_code_default 0x1
+#define fc_key_code_even 0x2
+#define fc_key_code_odd 0x3
+ u32 key_code : 2;
+ u32 key_array_col : 3;
+ u32 key_array_row : 5;
+ u32 dvb_en : 1; /* 0=TS bypasses the Descrambler */
+ u32 rw_flag : 1;
+ u32 reserved : 6;
+ } dvb_reg_60c;
+
+/* SRAM and Output Destination 0x700 to 0x714 */
+ struct {
+ u32 sram_addr :15;
+ u32 sram_rw : 1; /* 0=write, 1=read */
+ u32 sram_data : 8;
+ u32 sc_xfer_bit : 1;
+ u32 reserved1 : 3;
+ u32 oe_pin_reg : 1;
+ u32 ce_pin_reg : 1;
+ u32 reserved2 : 1;
+ u32 start_sram_ibi : 1;
+ } sram_ctrl_reg_700;
+
+ struct {
+ u32 net_addr_read :16;
+ u32 net_addr_write :16;
+ } net_buf_reg_704;
+
+ struct {
+ u32 cai_read :11;
+ u32 reserved1 : 5;
+ u32 cai_write :11;
+ u32 reserved2 : 6;
+ u32 cai_cnt : 4;
+ } cai_buf_reg_708;
+
+ struct {
+ u32 cao_read :11;
+ u32 reserved1 : 5;
+ u32 cap_write :11;
+ u32 reserved2 : 6;
+ u32 cao_cnt : 4;
+ } cao_buf_reg_70c;
+
+ struct {
+ u32 media_read :11;
+ u32 reserved1 : 5;
+ u32 media_write :11;
+ u32 reserved2 : 6;
+ u32 media_cnt : 4;
+ } media_buf_reg_710;
+
+ struct {
+ u32 NET_Dest : 2;
+ u32 CAI_Dest : 2;
+ u32 CAO_Dest : 2;
+ u32 MEDIA_Dest : 2;
+ u32 net_ovflow_error : 1;
+ u32 media_ovflow_error : 1;
+ u32 cai_ovflow_error : 1;
+ u32 cao_ovflow_error : 1;
+ u32 ctrl_usb_wan : 1;
+ u32 ctrl_sramdma : 1;
+ u32 ctrl_maximumfill : 1;
+ u32 reserved :17;
+ } sram_dest_reg_714;
+
+ struct {
+ u32 net_cnt :12;
+ u32 reserved1 : 4;
+ u32 net_addr_read : 1;
+ u32 reserved2 : 3;
+ u32 net_addr_write : 1;
+ u32 reserved3 :11;
+ } net_buf_reg_718;
+
+ struct {
+ u32 wan_speed_sig : 2;
+ u32 reserved1 : 6;
+ u32 wan_wait_state : 8;
+ u32 sram_chip : 2;
+ u32 sram_memmap : 2;
+ u32 reserved2 : 4;
+ u32 wan_pkt_frame : 4;
+ u32 reserved3 : 4;
+ } wan_ctrl_reg_71c;
+} flexcop_ibi_value;
+
+extern flexcop_ibi_value ibi_zero;
+
+typedef enum {
+ FC_I2C_PORT_DEMOD = 1,
+ FC_I2C_PORT_EEPROM = 2,
+ FC_I2C_PORT_TUNER = 3,
+} flexcop_i2c_port_t;
+
+typedef enum {
+ FC_WRITE = 0,
+ FC_READ = 1,
+} flexcop_access_op_t;
+
+typedef enum {
+ FC_SRAM_DEST_NET = 1,
+ FC_SRAM_DEST_CAI = 2,
+ FC_SRAM_DEST_CAO = 4,
+ FC_SRAM_DEST_MEDIA = 8
+} flexcop_sram_dest_t;
+
+typedef enum {
+ FC_SRAM_DEST_TARGET_WAN_USB = 0,
+ FC_SRAM_DEST_TARGET_DMA1 = 1,
+ FC_SRAM_DEST_TARGET_DMA2 = 2,
+ FC_SRAM_DEST_TARGET_FC3_CA = 3
+} flexcop_sram_dest_target_t;
+
+typedef enum {
+ FC_SRAM_2_32KB = 0, /* 64KB */
+ FC_SRAM_1_32KB = 1, /* 32KB - default fow FCII */
+ FC_SRAM_1_128KB = 2, /* 128KB */
+ FC_SRAM_1_48KB = 3, /* 48KB - default for FCIII */
+} flexcop_sram_type_t;
+
+typedef enum {
+ FC_WAN_SPEED_4MBITS = 0,
+ FC_WAN_SPEED_8MBITS = 1,
+ FC_WAN_SPEED_12MBITS = 2,
+ FC_WAN_SPEED_16MBITS = 3,
+} flexcop_wan_speed_t;
+
+typedef enum {
+ FC_DMA_1 = 1,
+ FC_DMA_2 = 2,
+} flexcop_dma_index_t;
+
+typedef enum {
+ FC_DMA_SUBADDR_0 = 1,
+ FC_DMA_SUBADDR_1 = 2,
+} flexcop_dma_addr_index_t;
+
+/* names of the particular registers */
+typedef enum {
+ dma1_000 = 0x000,
+ dma1_004 = 0x004,
+ dma1_008 = 0x008,
+ dma1_00c = 0x00c,
+ dma2_010 = 0x010,
+ dma2_014 = 0x014,
+ dma2_018 = 0x018,
+ dma2_01c = 0x01c,
+
+ tw_sm_c_100 = 0x100,
+ tw_sm_c_104 = 0x104,
+ tw_sm_c_108 = 0x108,
+ tw_sm_c_10c = 0x10c,
+ tw_sm_c_110 = 0x110,
+
+ lnb_switch_freq_200 = 0x200,
+ misc_204 = 0x204,
+ ctrl_208 = 0x208,
+ irq_20c = 0x20c,
+ sw_reset_210 = 0x210,
+ misc_214 = 0x214,
+ mbox_v8_to_host_218 = 0x218,
+ mbox_host_to_v8_21c = 0x21c,
+
+ pid_filter_300 = 0x300,
+ pid_filter_304 = 0x304,
+ pid_filter_308 = 0x308,
+ pid_filter_30c = 0x30c,
+ index_reg_310 = 0x310,
+ pid_n_reg_314 = 0x314,
+ mac_low_reg_318 = 0x318,
+ mac_high_reg_31c = 0x31c,
+
+ data_tag_400 = 0x400,
+ card_id_408 = 0x408,
+ card_id_40c = 0x40c,
+ mac_address_418 = 0x418,
+ mac_address_41c = 0x41c,
+
+ ci_600 = 0x600,
+ pi_604 = 0x604,
+ pi_608 = 0x608,
+ dvb_reg_60c = 0x60c,
+
+ sram_ctrl_reg_700 = 0x700,
+ net_buf_reg_704 = 0x704,
+ cai_buf_reg_708 = 0x708,
+ cao_buf_reg_70c = 0x70c,
+ media_buf_reg_710 = 0x710,
+ sram_dest_reg_714 = 0x714,
+ net_buf_reg_718 = 0x718,
+ wan_ctrl_reg_71c = 0x71c,
+} flexcop_ibi_register;
+
+#define flexcop_set_ibi_value(reg,attr,val) { \
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,reg); \
+ v.reg.attr = val; \
+ fc->write_ibi_reg(fc,reg,v); \
+}
+
+#endif
diff --git a/drivers/media/dvb/b2c2/flexcop-sram.c b/drivers/media/dvb/b2c2/flexcop-sram.c
new file mode 100644
index 0000000..01570ec
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-sram.c
@@ -0,0 +1,403 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-sram.c - functions for controlling the SRAM.
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+static void flexcop_sram_set_chip (struct flexcop_device *fc, flexcop_sram_type_t type)
+{
+ flexcop_set_ibi_value(wan_ctrl_reg_71c,sram_chip,type);
+}
+
+int flexcop_sram_init(struct flexcop_device *fc)
+{
+ switch (fc->rev) {
+ case FLEXCOP_II:
+ case FLEXCOP_IIB:
+ flexcop_sram_set_chip(fc,FC_SRAM_1_32KB);
+ break;
+ case FLEXCOP_III:
+ flexcop_sram_set_chip(fc,FC_SRAM_1_48KB);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target)
+{
+ flexcop_ibi_value v;
+
+ v = fc->read_ibi_reg(fc,sram_dest_reg_714);
+
+ if (fc->rev != FLEXCOP_III && target == FC_SRAM_DEST_TARGET_FC3_CA) {
+ err("SRAM destination target to available on FlexCopII(b)\n");
+ return -EINVAL;
+ }
+
+ deb_sram("sram dest: %x target: %x\n",dest, target);
+
+ if (dest & FC_SRAM_DEST_NET)
+ v.sram_dest_reg_714.NET_Dest = target;
+ if (dest & FC_SRAM_DEST_CAI)
+ v.sram_dest_reg_714.CAI_Dest = target;
+ if (dest & FC_SRAM_DEST_CAO)
+ v.sram_dest_reg_714.CAO_Dest = target;
+ if (dest & FC_SRAM_DEST_MEDIA)
+ v.sram_dest_reg_714.MEDIA_Dest = target;
+
+ fc->write_ibi_reg(fc,sram_dest_reg_714,v);
+ udelay(1000); /* TODO delay really necessary */
+
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_sram_set_dest);
+
+void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s)
+{
+ flexcop_set_ibi_value(wan_ctrl_reg_71c,wan_speed_sig,s);
+}
+EXPORT_SYMBOL(flexcop_wan_set_speed);
+
+void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill)
+{
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
+ v.sram_dest_reg_714.ctrl_usb_wan = usb_wan;
+ v.sram_dest_reg_714.ctrl_sramdma = sramdma;
+ v.sram_dest_reg_714.ctrl_maximumfill = maximumfill;
+ fc->write_ibi_reg(fc,sram_dest_reg_714,v);
+}
+EXPORT_SYMBOL(flexcop_sram_ctrl);
+
+#if 0
+static void flexcop_sram_write(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len)
+{
+ int i, retries;
+ u32 command;
+
+ for (i = 0; i < len; i++) {
+ command = bank | addr | 0x04000000 | (*buf << 0x10);
+
+ retries = 2;
+
+ while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
+ mdelay(1);
+ retries--;
+ };
+
+ if (retries == 0)
+ printk("%s: SRAM timeout\n", __FUNCTION__);
+
+ write_reg_dw(adapter, 0x700, command);
+
+ buf++;
+ addr++;
+ }
+}
+
+static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len)
+{
+ int i, retries;
+ u32 command, value;
+
+ for (i = 0; i < len; i++) {
+ command = bank | addr | 0x04008000;
+
+ retries = 10000;
+
+ while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
+ mdelay(1);
+ retries--;
+ };
+
+ if (retries == 0)
+ printk("%s: SRAM timeout\n", __FUNCTION__);
+
+ write_reg_dw(adapter, 0x700, command);
+
+ retries = 10000;
+
+ while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
+ mdelay(1);
+ retries--;
+ };
+
+ if (retries == 0)
+ printk("%s: SRAM timeout\n", __FUNCTION__);
+
+ value = read_reg_dw(adapter, 0x700) >> 0x10;
+
+ *buf = (value & 0xff);
+
+ addr++;
+ buf++;
+ }
+}
+
+static void sram_write_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
+{
+ u32 bank;
+
+ bank = 0;
+
+ if (adapter->dw_sram_type == 0x20000) {
+ bank = (addr & 0x18000) << 0x0d;
+ }
+
+ if (adapter->dw_sram_type == 0x00000) {
+ if ((addr >> 0x0f) == 0)
+ bank = 0x20000000;
+ else
+ bank = 0x10000000;
+ }
+
+ flex_sram_write(adapter, bank, addr & 0x7fff, buf, len);
+}
+
+static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
+{
+ u32 bank;
+
+ bank = 0;
+
+ if (adapter->dw_sram_type == 0x20000) {
+ bank = (addr & 0x18000) << 0x0d;
+ }
+
+ if (adapter->dw_sram_type == 0x00000) {
+ if ((addr >> 0x0f) == 0)
+ bank = 0x20000000;
+ else
+ bank = 0x10000000;
+ }
+
+ flex_sram_read(adapter, bank, addr & 0x7fff, buf, len);
+}
+
+static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
+{
+ u32 length;
+
+ while (len != 0) {
+ length = len;
+
+ // check if the address range belongs to the same
+ // 32K memory chip. If not, the data is read from
+ // one chip at a time.
+ if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
+ length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
+ }
+
+ sram_read_chunk(adapter, addr, buf, length);
+
+ addr = addr + length;
+ buf = buf + length;
+ len = len - length;
+ }
+}
+
+static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
+{
+ u32 length;
+
+ while (len != 0) {
+ length = len;
+
+ // check if the address range belongs to the same
+ // 32K memory chip. If not, the data is written to
+ // one chip at a time.
+ if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
+ length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
+ }
+
+ sram_write_chunk(adapter, addr, buf, length);
+
+ addr = addr + length;
+ buf = buf + length;
+ len = len - length;
+ }
+}
+
+static void sram_set_size(struct adapter *adapter, u32 mask)
+{
+ write_reg_dw(adapter, 0x71c, (mask | (~0x30000 & read_reg_dw(adapter, 0x71c))));
+}
+
+static void sram_init(struct adapter *adapter)
+{
+ u32 tmp;
+
+ tmp = read_reg_dw(adapter, 0x71c);
+
+ write_reg_dw(adapter, 0x71c, 1);
+
+ if (read_reg_dw(adapter, 0x71c) != 0) {
+ write_reg_dw(adapter, 0x71c, tmp);
+
+ adapter->dw_sram_type = tmp & 0x30000;
+
+ ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type);
+
+ } else {
+
+ adapter->dw_sram_type = 0x10000;
+
+ ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type);
+ }
+
+ /* return value is never used? */
+/* return adapter->dw_sram_type; */
+}
+
+static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr)
+{
+ u8 tmp1, tmp2;
+
+ dprintk("%s: mask = %x, addr = %x\n", __FUNCTION__, mask, addr);
+
+ sram_set_size(adapter, mask);
+ sram_init(adapter);
+
+ tmp2 = 0xa5;
+ tmp1 = 0x4f;
+
+ sram_write(adapter, addr, &tmp2, 1);
+ sram_write(adapter, addr + 4, &tmp1, 1);
+
+ tmp2 = 0;
+
+ mdelay(20);
+
+ sram_read(adapter, addr, &tmp2, 1);
+ sram_read(adapter, addr, &tmp2, 1);
+
+ dprintk("%s: wrote 0xa5, read 0x%2x\n", __FUNCTION__, tmp2);
+
+ if (tmp2 != 0xa5)
+ return 0;
+
+ tmp2 = 0x5a;
+ tmp1 = 0xf4;
+
+ sram_write(adapter, addr, &tmp2, 1);
+ sram_write(adapter, addr + 4, &tmp1, 1);
+
+ tmp2 = 0;
+
+ mdelay(20);
+
+ sram_read(adapter, addr, &tmp2, 1);
+ sram_read(adapter, addr, &tmp2, 1);
+
+ dprintk("%s: wrote 0x5a, read 0x%2x\n", __FUNCTION__, tmp2);
+
+ if (tmp2 != 0x5a)
+ return 0;
+
+ return 1;
+}
+
+static u32 sram_length(struct adapter *adapter)
+{
+ if (adapter->dw_sram_type == 0x10000)
+ return 32768; // 32K
+ if (adapter->dw_sram_type == 0x00000)
+ return 65536; // 64K
+ if (adapter->dw_sram_type == 0x20000)
+ return 131072; // 128K
+
+ return 32768; // 32K
+}
+
+/* FlexcopII can work with 32K, 64K or 128K of external SRAM memory.
+ - for 128K there are 4x32K chips at bank 0,1,2,3.
+ - for 64K there are 2x32K chips at bank 1,2.
+ - for 32K there is one 32K chip at bank 0.
+
+ FlexCop works only with one bank at a time. The bank is selected
+ by bits 28-29 of the 0x700 register.
+
+ bank 0 covers addresses 0x00000-0x07fff
+ bank 1 covers addresses 0x08000-0x0ffff
+ bank 2 covers addresses 0x10000-0x17fff
+ bank 3 covers addresses 0x18000-0x1ffff
+*/
+
+static int flexcop_sram_detect(struct flexcop_device *fc)
+{
+ flexcop_ibi_value r208,r71c_0,vr71c_1;
+
+ r208 = fc->read_ibi_reg(fc, ctrl_208);
+ fc->write_ibi_reg(fc, ctrl_208, ibi_zero);
+
+ r71c_0 = fc->read_ibi_reg(fc, wan_ctrl_reg_71c);
+
+ write_reg_dw(adapter, 0x71c, 1);
+
+ tmp3 = read_reg_dw(adapter, 0x71c);
+
+ dprintk("%s: tmp3 = %x\n", __FUNCTION__, tmp3);
+
+ write_reg_dw(adapter, 0x71c, tmp2);
+
+ // check for internal SRAM ???
+ tmp3--;
+ if (tmp3 != 0) {
+ sram_set_size(adapter, 0x10000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+
+ dprintk("%s: sram size = 32K\n", __FUNCTION__);
+
+ return 32;
+ }
+
+ if (sram_test_location(adapter, 0x20000, 0x18000) != 0) {
+ sram_set_size(adapter, 0x20000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+
+ dprintk("%s: sram size = 128K\n", __FUNCTION__);
+
+ return 128;
+ }
+
+ if (sram_test_location(adapter, 0x00000, 0x10000) != 0) {
+ sram_set_size(adapter, 0x00000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+
+ dprintk("%s: sram size = 64K\n", __FUNCTION__);
+
+ return 64;
+ }
+
+ if (sram_test_location(adapter, 0x10000, 0x00000) != 0) {
+ sram_set_size(adapter, 0x10000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+
+ dprintk("%s: sram size = 32K\n", __FUNCTION__);
+
+ return 32;
+ }
+
+ sram_set_size(adapter, 0x10000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+
+ dprintk("%s: SRAM detection failed. Set to 32K \n", __FUNCTION__);
+
+ return 0;
+}
+
+static void sll_detect_sram_size(struct adapter *adapter)
+{
+ sram_detect_for_flex2(adapter);
+}
+
+#endif
diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c
new file mode 100644
index 0000000..0113449
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-usb.c
@@ -0,0 +1,577 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-usb.c - covers the USB part.
+ *
+ * see flexcop.c for copyright information.
+ */
+
+#define FC_LOG_PREFIX "flexcop_usb"
+#include "flexcop-usb.h"
+#include "flexcop-common.h"
+
+/* Version information */
+#define DRIVER_VERSION "0.1"
+#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver"
+#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
+
+/* debug */
+#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+#define dprintk(level,args...) \
+ do { if ((debug & level)) { printk(args); } } while (0)
+#define debug_dump(b,l,method) {\
+ int i; \
+ for (i = 0; i < l; i++) method("%02x ", b[i]); \
+ method("\n");\
+}
+
+#define DEBSTATUS ""
+#else
+#define dprintk(level,args...)
+#define debug_dump(b,l,method)
+#define DEBSTATUS " (debugging is not enabled)"
+#endif
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS);
+#undef DEBSTATUS
+
+#define deb_info(args...) dprintk(0x01,args)
+#define deb_ts(args...) dprintk(0x02,args)
+#define deb_ctrl(args...) dprintk(0x04,args)
+#define deb_i2c(args...) dprintk(0x08,args)
+#define deb_v8(args...) dprintk(0x10,args)
+
+/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
+ * in the IBI address, to make the V8 code simpler.
+ * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (these are the six bits used)
+ * in general: 0000 0HHH 000L LL00
+ * IBI ADDRESS FORMAT: RHHH BLLL
+ *
+ * where R is the read(1)/write(0) bit, B is the busy bit
+ * and HHH and LLL are the two sets of three bits from the PCI address.
+ */
+#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
+#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
+
+/*
+ * DKT 020228
+ * - forget about this VENDOR_BUFFER_SIZE, read and write register
+ * deal with DWORD or 4 bytes, that should be should from now on
+ * - from now on, we don't support anything older than firm 1.00
+ * I eliminated the write register as a 2 trip of writing hi word and lo word
+ * and force this to write only 4 bytes at a time.
+ * NOTE: this should work with all the firmware from 1.00 and newer
+ */
+static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u32 *val, u8 read)
+{
+ struct flexcop_usb *fc_usb = fc->bus_specific;
+ u8 request = read ? B2C2_USB_READ_REG : B2C2_USB_WRITE_REG;
+ u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR;
+ u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | (read ? 0x80 : 0);
+
+ int len = usb_control_msg(fc_usb->udev,
+ read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT,
+ request,
+ request_type, /* 0xc0 read or 0x40 write*/
+ wAddress,
+ 0,
+ val,
+ sizeof(u32),
+ B2C2_WAIT_FOR_OPERATION_RDW * HZ);
+
+ if (len != sizeof(u32)) {
+ err("error while %s dword from %d (%d).",read ? "reading" : "writing",
+ wAddress,wRegOffsPCI);
+ return -EIO;
+ }
+ return 0;
+}
+
+/*
+ * DKT 010817 - add support for V8 memory read/write and flash update
+ */
+static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
+ flexcop_usb_request_t req, u8 page, u16 wAddress,
+ u8 *pbBuffer,u32 buflen)
+{
+// u8 dwRequestType;
+ u8 request_type = USB_TYPE_VENDOR;
+ u16 wIndex;
+ int nWaitTime,pipe,len;
+
+ wIndex = page << 8;
+
+ switch (req) {
+ case B2C2_USB_READ_V8_MEM:
+ nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
+ request_type |= USB_DIR_IN;
+// dwRequestType = (u8) RTYPE_READ_V8_MEMORY;
+ pipe = B2C2_USB_CTRL_PIPE_IN;
+ break;
+ case B2C2_USB_WRITE_V8_MEM:
+ wIndex |= pbBuffer[0];
+ request_type |= USB_DIR_OUT;
+ nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
+// dwRequestType = (u8) RTYPE_WRITE_V8_MEMORY;
+ pipe = B2C2_USB_CTRL_PIPE_OUT;
+ break;
+ case B2C2_USB_FLASH_BLOCK:
+ request_type |= USB_DIR_OUT;
+ nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
+// dwRequestType = (u8) RTYPE_WRITE_V8_FLASH;
+ pipe = B2C2_USB_CTRL_PIPE_OUT;
+ break;
+ default:
+ deb_info("unsupported request for v8_mem_req %x.\n",req);
+ return -EINVAL;
+ }
+ deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n",request_type,req,
+ wAddress,wIndex,buflen);
+
+ len = usb_control_msg(fc_usb->udev,pipe,
+ req,
+ request_type,
+ wAddress,
+ wIndex,
+ pbBuffer,
+ buflen,
+ nWaitTime * HZ);
+
+ debug_dump(pbBuffer,len,deb_v8);
+
+ return len == buflen ? 0 : -EIO;
+}
+
+#define bytes_left_to_read_on_page(paddr,buflen) \
+ ((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \
+ ? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)))
+
+static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb,flexcop_usb_request_t req,
+ flexcop_usb_mem_page_t page_start, u32 addr, int extended, u8 *buf, u32 len)
+{
+ int i,ret = 0;
+ u16 wMax;
+ u32 pagechunk = 0;
+
+ switch(req) {
+ case B2C2_USB_READ_V8_MEM: wMax = USB_MEM_READ_MAX; break;
+ case B2C2_USB_WRITE_V8_MEM: wMax = USB_MEM_WRITE_MAX; break;
+ case B2C2_USB_FLASH_BLOCK: wMax = USB_FLASH_MAX; break;
+ default:
+ return -EINVAL;
+ break;
+ }
+ for (i = 0; i < len;) {
+ pagechunk = wMax < bytes_left_to_read_on_page(addr,len) ? wMax : bytes_left_to_read_on_page(addr,len);
+ deb_info("%x\n",(addr & V8_MEMORY_PAGE_MASK) | (V8_MEMORY_EXTENDED*extended));
+ if ((ret = flexcop_usb_v8_memory_req(fc_usb,req,
+ page_start + (addr / V8_MEMORY_PAGE_SIZE), /* actual page */
+ (addr & V8_MEMORY_PAGE_MASK) | (V8_MEMORY_EXTENDED*extended),
+ &buf[i],pagechunk)) < 0)
+ return ret;
+
+ addr += pagechunk;
+ len -= pagechunk;
+ }
+ return 0;
+}
+
+static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended)
+{
+ return flexcop_usb_memory_req(fc->bus_specific,B2C2_USB_READ_V8_MEM,
+ V8_MEMORY_PAGE_FLASH,0x1f010,1,fc->dvb_adapter.proposed_mac,6);
+}
+
+#if 0
+static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set,
+ flexcop_usb_utility_function_t func, u8 extra, u16 wIndex,
+ u16 buflen, u8 *pvBuffer)
+{
+ u16 wValue;
+ u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR;
+// u8 dwRequestType = (u8) RTYPE_GENERIC,
+ int nWaitTime = 2,
+ pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN,
+ len;
+
+ wValue = (func << 8) | extra;
+
+ len = usb_control_msg(fc_usb->udev,pipe,
+ B2C2_USB_UTILITY,
+ request_type,
+ wValue,
+ wIndex,
+ pvBuffer,
+ buflen,
+ nWaitTime * HZ);
+ return len == buflen ? 0 : -EIO;
+}
+#endif
+
+/* usb i2c stuff */
+static int flexcop_usb_i2c_req(struct flexcop_usb *fc_usb,
+ flexcop_usb_request_t req, flexcop_usb_i2c_function_t func,
+ flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u8 buflen)
+{
+ u16 wValue, wIndex;
+ int nWaitTime,pipe,len;
+// u8 dwRequestType;
+ u8 request_type = USB_TYPE_VENDOR;
+
+ switch (func) {
+ case USB_FUNC_I2C_WRITE:
+ case USB_FUNC_I2C_MULTIWRITE:
+ case USB_FUNC_I2C_REPEATWRITE:
+ /* DKT 020208 - add this to support special case of DiSEqC */
+ case USB_FUNC_I2C_CHECKWRITE:
+ pipe = B2C2_USB_CTRL_PIPE_OUT;
+ nWaitTime = 2;
+// dwRequestType = (u8) RTYPE_GENERIC;
+ request_type |= USB_DIR_OUT;
+ break;
+ case USB_FUNC_I2C_READ:
+ case USB_FUNC_I2C_REPEATREAD:
+ pipe = B2C2_USB_CTRL_PIPE_IN;
+ nWaitTime = 2;
+// dwRequestType = (u8) RTYPE_GENERIC;
+ request_type |= USB_DIR_IN;
+ break;
+ default:
+ deb_info("unsupported function for i2c_req %x\n",func);
+ return -EINVAL;
+ }
+ wValue = (func << 8 ) | (port << 4);
+ wIndex = (chipaddr << 8 ) | addr;
+
+ deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",func,request_type,req,
+ ((wValue && 0xff) << 8),wValue >> 8,((wIndex && 0xff) << 8),wIndex >> 8);
+
+ len = usb_control_msg(fc_usb->udev,pipe,
+ req,
+ request_type,
+ wValue,
+ wIndex,
+ buf,
+ buflen,
+ nWaitTime * HZ);
+
+ return len == buflen ? 0 : -EREMOTEIO;
+}
+
+/* actual bus specific access functions, make sure prototype are/will be equal to pci */
+static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register reg)
+{
+ flexcop_ibi_value val;
+ val.raw = 0;
+ flexcop_usb_readwrite_dw(fc,reg, &val.raw, 1);
+ return val;
+}
+
+static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register reg, flexcop_ibi_value val)
+{
+ return flexcop_usb_readwrite_dw(fc,reg, &val.raw, 0);
+}
+
+static int flexcop_usb_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op,
+ flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len)
+{
+ if (op == FC_READ)
+ return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_READ,port,chipaddr,addr,buf,len);
+ else
+ return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_WRITE,port,chipaddr,addr,buf,len);
+}
+
+static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb, u8 *buffer, int buffer_length)
+{
+ u8 *b;
+ int l;
+
+ deb_ts("tmp_buffer_length=%d, buffer_length=%d\n", fc_usb->tmp_buffer_length, buffer_length);
+
+ if (fc_usb->tmp_buffer_length > 0) {
+ memcpy(fc_usb->tmp_buffer+fc_usb->tmp_buffer_length, buffer, buffer_length);
+ fc_usb->tmp_buffer_length += buffer_length;
+ b = fc_usb->tmp_buffer;
+ l = fc_usb->tmp_buffer_length;
+ } else {
+ b=buffer;
+ l=buffer_length;
+ }
+
+ while (l >= 190) {
+ if (*b == 0xff)
+ switch (*(b+1) & 0x03) {
+ case 0x01: /* media packet */
+ if ( *(b+2) == 0x47 )
+ flexcop_pass_dmx_packets(fc_usb->fc_dev, b+2, 1);
+ else
+ deb_ts("not ts packet %02x %02x %02x %02x \n", *(b+2), *(b+3), *(b+4), *(b+5) );
+
+ b += 190;
+ l -= 190;
+ break;
+ default:
+ deb_ts("wrong packet type\n");
+ l = 0;
+ break;
+ }
+ else {
+ deb_ts("wrong header\n");
+ l = 0;
+ }
+ }
+
+ if (l>0)
+ memcpy(fc_usb->tmp_buffer, b, l);
+ fc_usb->tmp_buffer_length = l;
+}
+
+static void flexcop_usb_urb_complete(struct urb *urb, struct pt_regs *ptregs)
+{
+ struct flexcop_usb *fc_usb = urb->context;
+ int i;
+
+ if (urb->actual_length > 0)
+ deb_ts("urb completed, bufsize: %d actlen; %d\n",urb->transfer_buffer_length, urb->actual_length);
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ if (urb->iso_frame_desc[i].status < 0) {
+ err("iso frame descriptor %d has an error: %d\n",i,urb->iso_frame_desc[i].status);
+ } else
+ if (urb->iso_frame_desc[i].actual_length > 0) {
+ deb_ts("passed %d bytes to the demux\n",urb->iso_frame_desc[i].actual_length);
+
+ flexcop_usb_process_frame(fc_usb,
+ urb->transfer_buffer + urb->iso_frame_desc[i].offset,
+ urb->iso_frame_desc[i].actual_length);
+ }
+ urb->iso_frame_desc[i].status = 0;
+ urb->iso_frame_desc[i].actual_length = 0;
+ }
+
+ usb_submit_urb(urb,GFP_ATOMIC);
+}
+
+static int flexcop_usb_stream_control(struct flexcop_device *fc, int onoff)
+{
+ /* submit/kill iso packets */
+ return 0;
+}
+
+static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb)
+{
+ int i;
+ for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
+ if (fc_usb->iso_urb[i] != NULL) {
+ deb_ts("unlinking/killing urb no. %d\n",i);
+ usb_kill_urb(fc_usb->iso_urb[i]);
+ usb_free_urb(fc_usb->iso_urb[i]);
+ }
+
+ if (fc_usb->iso_buffer != NULL)
+ pci_free_consistent(NULL,fc_usb->buffer_size, fc_usb->iso_buffer, fc_usb->dma_addr);
+}
+
+static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
+{
+ u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize;
+ int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret;
+ int buffer_offset = 0;
+
+ deb_ts("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n",
+ B2C2_USB_NUM_ISO_URB, B2C2_USB_FRAMES_PER_ISO, frame_size,bufsize);
+
+ fc_usb->iso_buffer = pci_alloc_consistent(NULL,bufsize,&fc_usb->dma_addr);
+ if (fc_usb->iso_buffer == NULL)
+ return -ENOMEM;
+ memset(fc_usb->iso_buffer, 0, bufsize);
+ fc_usb->buffer_size = bufsize;
+
+ /* creating iso urbs */
+ for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
+ if (!(fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,GFP_ATOMIC))) {
+ ret = -ENOMEM;
+ goto urb_error;
+ }
+ /* initialising and submitting iso urbs */
+ for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
+ int frame_offset = 0;
+ struct urb *urb = fc_usb->iso_urb[i];
+ deb_ts("initializing and submitting urb no. %d (buf_offset: %d).\n",i,buffer_offset);
+
+ urb->dev = fc_usb->udev;
+ urb->context = fc_usb;
+ urb->complete = flexcop_usb_urb_complete;
+ urb->pipe = B2C2_USB_DATA_PIPE;
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->interval = 1;
+ urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO;
+ urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO;
+ urb->transfer_buffer = fc_usb->iso_buffer + buffer_offset;
+
+ buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
+ for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
+ deb_ts("urb no: %d, frame: %d, frame_offset: %d\n",i,j,frame_offset);
+ urb->iso_frame_desc[j].offset = frame_offset;
+ urb->iso_frame_desc[j].length = frame_size;
+ frame_offset += frame_size;
+ }
+
+ if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) {
+ err("submitting urb %d failed with %d.",i,ret);
+ goto urb_error;
+ }
+ deb_ts("submitted urb no. %d.\n",i);
+ }
+
+/* SRAM */
+
+ flexcop_sram_set_dest(fc_usb->fc_dev,FC_SRAM_DEST_MEDIA | FC_SRAM_DEST_NET |
+ FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_WAN_USB);
+ flexcop_wan_set_speed(fc_usb->fc_dev,FC_WAN_SPEED_8MBITS);
+ flexcop_sram_ctrl(fc_usb->fc_dev,1,1,1);
+
+ ret = 0;
+ goto success;
+urb_error:
+ flexcop_usb_transfer_exit(fc_usb);
+success:
+ return ret;
+}
+
+static int flexcop_usb_init(struct flexcop_usb *fc_usb)
+{
+ /* use the alternate setting with the larges buffer */
+ usb_set_interface(fc_usb->udev,0,1);
+ switch (fc_usb->udev->speed) {
+ case USB_SPEED_LOW:
+ err("cannot handle USB speed because it is to sLOW.");
+ return -ENODEV;
+ break;
+ case USB_SPEED_FULL:
+ info("running at FULL speed.");
+ break;
+ case USB_SPEED_HIGH:
+ info("running at HIGH speed.");
+ break;
+ case USB_SPEED_UNKNOWN: /* fall through */
+ default:
+ err("cannot handle USB speed because it is unkown.");
+ return -ENODEV;
+ }
+ usb_set_intfdata(fc_usb->uintf, fc_usb);
+ return 0;
+}
+
+static void flexcop_usb_exit(struct flexcop_usb *fc_usb)
+{
+ usb_set_intfdata(fc_usb->uintf, NULL);
+}
+
+static int flexcop_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct flexcop_usb *fc_usb = NULL;
+ struct flexcop_device *fc = NULL;
+ int ret;
+
+ if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
+ err("out of memory\n");
+ return -ENOMEM;
+ }
+
+/* general flexcop init */
+ fc_usb = fc->bus_specific;
+ fc_usb->fc_dev = fc;
+
+ fc->read_ibi_reg = flexcop_usb_read_ibi_reg;
+ fc->write_ibi_reg = flexcop_usb_write_ibi_reg;
+ fc->i2c_request = flexcop_usb_i2c_request;
+ fc->get_mac_addr = flexcop_usb_get_mac_addr;
+
+ fc->stream_control = flexcop_usb_stream_control;
+
+ fc->pid_filtering = 1;
+ fc->bus_type = FC_USB;
+
+ fc->dev = &udev->dev;
+ fc->owner = THIS_MODULE;
+
+/* bus specific part */
+ fc_usb->udev = udev;
+ fc_usb->uintf = intf;
+ if ((ret = flexcop_usb_init(fc_usb)) != 0)
+ goto err_kfree;
+
+/* init flexcop */
+ if ((ret = flexcop_device_initialize(fc)) != 0)
+ goto err_usb_exit;
+
+/* xfer init */
+ if ((ret = flexcop_usb_transfer_init(fc_usb)) != 0)
+ goto err_fc_exit;
+
+ info("%s successfully initialized and connected.",DRIVER_NAME);
+ ret = 0;
+ goto success;
+err_fc_exit:
+ flexcop_device_exit(fc);
+err_usb_exit:
+ flexcop_usb_exit(fc_usb);
+err_kfree:
+ flexcop_device_kfree(fc);
+success:
+ return ret;
+}
+
+static void flexcop_usb_disconnect(struct usb_interface *intf)
+{
+ struct flexcop_usb *fc_usb = usb_get_intfdata(intf);
+ flexcop_usb_transfer_exit(fc_usb);
+ flexcop_device_exit(fc_usb->fc_dev);
+ flexcop_usb_exit(fc_usb);
+ flexcop_device_kfree(fc_usb->fc_dev);
+ info("%s successfully deinitialized and disconnected.",DRIVER_NAME);
+}
+
+static struct usb_device_id flexcop_usb_table [] = {
+ { USB_DEVICE(0x0af7, 0x0101) },
+ { }
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver flexcop_usb_driver = {
+ .owner = THIS_MODULE,
+ .name = "Technisat/B2C2 FlexCop II/IIb/III USB",
+ .probe = flexcop_usb_probe,
+ .disconnect = flexcop_usb_disconnect,
+ .id_table = flexcop_usb_table,
+};
+
+/* module stuff */
+static int __init flexcop_usb_module_init(void)
+{
+ int result;
+ if ((result = usb_register(&flexcop_usb_driver))) {
+ err("usb_register failed. (%d)",result);
+ return result;
+ }
+
+ return 0;
+}
+
+static void __exit flexcop_usb_module_exit(void)
+{
+ /* deregister this driver from the USB subsystem */
+ usb_deregister(&flexcop_usb_driver);
+}
+
+module_init(flexcop_usb_module_init);
+module_exit(flexcop_usb_module_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_NAME);
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/b2c2/flexcop-usb.h b/drivers/media/dvb/b2c2/flexcop-usb.h
new file mode 100644
index 0000000..630e647
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-usb.h
@@ -0,0 +1,119 @@
+#ifndef __FLEXCOP_USB_H_INCLUDED__
+#define __FLEXCOP_USB_H_INCLUDED__
+
+#include <linux/usb.h>
+
+/* transfer parameters */
+#define B2C2_USB_FRAMES_PER_ISO 4
+#define B2C2_USB_NUM_ISO_URB 4
+
+#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev,0)
+#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev,0)
+#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev,0x81)
+
+struct flexcop_usb {
+ struct usb_device *udev;
+ struct usb_interface *uintf;
+
+ u8 *iso_buffer;
+ int buffer_size;
+ dma_addr_t dma_addr;
+ struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
+
+ struct flexcop_device *fc_dev;
+
+ u8 tmp_buffer[1023+190];
+ int tmp_buffer_length;
+};
+
+#if 0
+/* request types TODO What is its use?*/
+typedef enum {
+
+/* something is wrong with this part
+ RTYPE_READ_DW = (1 << 6),
+ RTYPE_WRITE_DW_1 = (3 << 6),
+ RTYPE_READ_V8_MEMORY = (6 << 6),
+ RTYPE_WRITE_V8_MEMORY = (7 << 6),
+ RTYPE_WRITE_V8_FLASH = (8 << 6),
+ RTYPE_GENERIC = (9 << 6),
+*/
+} flexcop_usb_request_type_t;
+#endif
+
+/* request */
+typedef enum {
+ B2C2_USB_WRITE_V8_MEM = 0x04,
+ B2C2_USB_READ_V8_MEM = 0x05,
+ B2C2_USB_READ_REG = 0x08,
+ B2C2_USB_WRITE_REG = 0x0A,
+/* B2C2_USB_WRITEREGLO = 0x0A, */
+ B2C2_USB_WRITEREGHI = 0x0B,
+ B2C2_USB_FLASH_BLOCK = 0x10,
+ B2C2_USB_I2C_REQUEST = 0x11,
+ B2C2_USB_UTILITY = 0x12,
+} flexcop_usb_request_t;
+
+/* function definition for I2C_REQUEST */
+typedef enum {
+ USB_FUNC_I2C_WRITE = 0x01,
+ USB_FUNC_I2C_MULTIWRITE = 0x02,
+ USB_FUNC_I2C_READ = 0x03,
+ USB_FUNC_I2C_REPEATWRITE = 0x04,
+ USB_FUNC_GET_DESCRIPTOR = 0x05,
+ USB_FUNC_I2C_REPEATREAD = 0x06,
+/* DKT 020208 - add this to support special case of DiSEqC */
+ USB_FUNC_I2C_CHECKWRITE = 0x07,
+ USB_FUNC_I2C_CHECKRESULT = 0x08,
+} flexcop_usb_i2c_function_t;
+
+/*
+ * function definition for UTILITY request 0x12
+ * DKT 020304 - new utility function
+ */
+typedef enum {
+ UTILITY_SET_FILTER = 0x01,
+ UTILITY_DATA_ENABLE = 0x02,
+ UTILITY_FLEX_MULTIWRITE = 0x03,
+ UTILITY_SET_BUFFER_SIZE = 0x04,
+ UTILITY_FLEX_OPERATOR = 0x05,
+ UTILITY_FLEX_RESET300_START = 0x06,
+ UTILITY_FLEX_RESET300_STOP = 0x07,
+ UTILITY_FLEX_RESET300 = 0x08,
+ UTILITY_SET_ISO_SIZE = 0x09,
+ UTILITY_DATA_RESET = 0x0A,
+ UTILITY_GET_DATA_STATUS = 0x10,
+ UTILITY_GET_V8_REG = 0x11,
+/* DKT 020326 - add function for v1.14 */
+ UTILITY_SRAM_WRITE = 0x12,
+ UTILITY_SRAM_READ = 0x13,
+ UTILITY_SRAM_TESTFILL = 0x14,
+ UTILITY_SRAM_TESTSET = 0x15,
+ UTILITY_SRAM_TESTVERIFY = 0x16,
+} flexcop_usb_utility_function_t;
+
+#define B2C2_WAIT_FOR_OPERATION_RW 1*HZ /* 1 s */
+#define B2C2_WAIT_FOR_OPERATION_RDW 3*HZ /* 3 s */
+#define B2C2_WAIT_FOR_OPERATION_WDW 1*HZ /* 1 s */
+
+#define B2C2_WAIT_FOR_OPERATION_V8READ 3*HZ /* 3 s */
+#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3*HZ /* 3 s */
+#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3*HZ /* 3 s */
+
+typedef enum {
+ V8_MEMORY_PAGE_DVB_CI = 0x20,
+ V8_MEMORY_PAGE_DVB_DS = 0x40,
+ V8_MEMORY_PAGE_MULTI2 = 0x60,
+ V8_MEMORY_PAGE_FLASH = 0x80
+} flexcop_usb_mem_page_t;
+
+#define V8_MEMORY_EXTENDED (1 << 15)
+
+#define USB_MEM_READ_MAX 32
+#define USB_MEM_WRITE_MAX 1
+#define USB_FLASH_MAX 8
+
+#define V8_MEMORY_PAGE_SIZE 0x8000 // 32K
+#define V8_MEMORY_PAGE_MASK 0x7FFF
+
+#endif
diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c
new file mode 100644
index 0000000..8b5d14d
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop.c
@@ -0,0 +1,286 @@
+/*
+ * flexcop.c - driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher <patrick.boettcher@desy.de>
+ *
+ * based on the skystar2-driver
+ * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
+ *
+ * Acknowledgements:
+ * John Jurrius from BBTI, Inc. for extensive support with
+ * code examples and data books
+ *
+ * Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting)
+ *
+ * Contributions to the skystar2-driver have been done by
+ * Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes)
+ * Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code)
+ * Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac filtering)
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include "flexcop.h"
+
+#define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip"
+#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de"
+
+#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+#define DEBSTATUS ""
+#else
+#define DEBSTATUS " (debugging is not enabled)"
+#endif
+
+int b2c2_flexcop_debug;
+module_param_named(debug, b2c2_flexcop_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram (|-able))." DEBSTATUS);
+#undef DEBSTATUS
+
+/* global zero for ibi values */
+flexcop_ibi_value ibi_zero;
+
+static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct flexcop_device *fc = dvbdmxfeed->demux->priv;
+ return flexcop_pid_feed_control(fc,dvbdmxfeed,1);
+}
+
+static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct flexcop_device *fc = dvbdmxfeed->demux->priv;
+ return flexcop_pid_feed_control(fc,dvbdmxfeed,0);
+}
+
+static int flexcop_dvb_init(struct flexcop_device *fc)
+{
+ int ret;
+ if ((ret = dvb_register_adapter(&fc->dvb_adapter,"FlexCop Digital TV device",fc->owner)) < 0) {
+ err("error registering DVB adapter");
+ return ret;
+ }
+ fc->dvb_adapter.priv = fc;
+
+ fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
+ fc->demux.priv = fc;
+
+ fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED;
+
+ fc->demux.start_feed = flexcop_dvb_start_feed;
+ fc->demux.stop_feed = flexcop_dvb_stop_feed;
+ fc->demux.write_to_decoder = NULL;
+
+ if ((ret = dvb_dmx_init(&fc->demux)) < 0) {
+ err("dvb_dmx failed: error %d",ret);
+ goto err_dmx;
+ }
+
+ fc->hw_frontend.source = DMX_FRONTEND_0;
+
+ fc->dmxdev.filternum = fc->demux.feednum;
+ fc->dmxdev.demux = &fc->demux.dmx;
+ fc->dmxdev.capabilities = 0;
+ if ((ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter)) < 0) {
+ err("dvb_dmxdev_init failed: error %d",ret);
+ goto err_dmx_dev;
+ }
+
+ if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
+ err("adding hw_frontend to dmx failed: error %d",ret);
+ goto err_dmx_add_hw_frontend;
+ }
+
+ fc->mem_frontend.source = DMX_MEMORY_FE;
+ if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend)) < 0) {
+ err("adding mem_frontend to dmx failed: error %d",ret);
+ goto err_dmx_add_mem_frontend;
+ }
+
+ if ((ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
+ err("connect frontend failed: error %d",ret);
+ goto err_connect_frontend;
+ }
+
+ dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx);
+
+ fc->init_state |= FC_STATE_DVB_INIT;
+ goto success;
+
+err_connect_frontend:
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend);
+err_dmx_add_mem_frontend:
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend);
+err_dmx_add_hw_frontend:
+ dvb_dmxdev_release(&fc->dmxdev);
+err_dmx_dev:
+ dvb_dmx_release(&fc->demux);
+err_dmx:
+ dvb_unregister_adapter(&fc->dvb_adapter);
+ return ret;
+
+success:
+ return 0;
+}
+
+static void flexcop_dvb_exit(struct flexcop_device *fc)
+{
+ if (fc->init_state & FC_STATE_DVB_INIT) {
+ dvb_net_release(&fc->dvbnet);
+
+ fc->demux.dmx.close(&fc->demux.dmx);
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend);
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend);
+ dvb_dmxdev_release(&fc->dmxdev);
+ dvb_dmx_release(&fc->demux);
+ dvb_unregister_adapter(&fc->dvb_adapter);
+
+ deb_info("deinitialized dvb stuff\n");
+ }
+ fc->init_state &= ~FC_STATE_DVB_INIT;
+}
+
+/* these methods are necessary to achieve the long-term-goal of hiding the
+ * struct flexcop_device from the bus-parts */
+void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len)
+{
+ dvb_dmx_swfilter(&fc->demux, buf, len);
+}
+EXPORT_SYMBOL(flexcop_pass_dmx_data);
+
+void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no)
+{
+ dvb_dmx_swfilter_packets(&fc->demux, buf, no);
+}
+EXPORT_SYMBOL(flexcop_pass_dmx_packets);
+
+static void flexcop_reset(struct flexcop_device *fc)
+{
+ flexcop_ibi_value v210,v204;
+
+/* reset the flexcop itself */
+ fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
+
+ v210.raw = 0;
+ v210.sw_reset_210.reset_blocks = 0xff;
+ v210.sw_reset_210.Block_reset_enable = 0xb2;
+ fc->write_ibi_reg(fc,sw_reset_210,v210);
+
+/* reset the periphical devices */
+
+ v204 = fc->read_ibi_reg(fc,misc_204);
+ v204.misc_204.Per_reset_sig = 0;
+ fc->write_ibi_reg(fc,misc_204,v204);
+ v204.misc_204.Per_reset_sig = 1;
+ fc->write_ibi_reg(fc,misc_204,v204);
+}
+
+struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len)
+{
+ void *bus;
+ struct flexcop_device *fc = kmalloc(sizeof(struct flexcop_device), GFP_KERNEL);
+ if (!fc) {
+ err("no memory");
+ return NULL;
+ }
+ memset(fc, 0, sizeof(struct flexcop_device));
+
+ bus = kmalloc(bus_specific_len, GFP_KERNEL);
+ if (!bus) {
+ err("no memory");
+ kfree(fc);
+ return NULL;
+ }
+ memset(bus, 0, bus_specific_len);
+
+ fc->bus_specific = bus;
+
+ return fc;
+}
+EXPORT_SYMBOL(flexcop_device_kmalloc);
+
+void flexcop_device_kfree(struct flexcop_device *fc)
+{
+ kfree(fc->bus_specific);
+ kfree(fc);
+}
+EXPORT_SYMBOL(flexcop_device_kfree);
+
+int flexcop_device_initialize(struct flexcop_device *fc)
+{
+ int ret;
+ ibi_zero.raw = 0;
+
+ flexcop_reset(fc);
+ flexcop_determine_revision(fc);
+ flexcop_sram_init(fc);
+ flexcop_hw_filter_init(fc);
+
+ flexcop_smc_ctrl(fc, 0);
+
+ if ((ret = flexcop_dvb_init(fc)))
+ goto error;
+
+ /* do the MAC address reading after initializing the dvb_adapter */
+ if (fc->get_mac_addr(fc, 0) == 0) {
+ u8 *b = fc->dvb_adapter.proposed_mac;
+ info("MAC address = %02x:%02x:%02x:%02x:%02x:%02x", b[0],b[1],b[2],b[3],b[4],b[5]);
+ flexcop_set_mac_filter(fc,b);
+ flexcop_mac_filter_ctrl(fc,1);
+ } else
+ warn("reading of MAC address failed.\n");
+
+
+ if ((ret = flexcop_i2c_init(fc)))
+ goto error;
+
+ if ((ret = flexcop_frontend_init(fc)))
+ goto error;
+
+ flexcop_device_name(fc,"initialization of","complete");
+
+ ret = 0;
+ goto success;
+error:
+ flexcop_device_exit(fc);
+success:
+ return ret;
+}
+EXPORT_SYMBOL(flexcop_device_initialize);
+
+void flexcop_device_exit(struct flexcop_device *fc)
+{
+ flexcop_frontend_exit(fc);
+ flexcop_i2c_exit(fc);
+ flexcop_dvb_exit(fc);
+}
+EXPORT_SYMBOL(flexcop_device_exit);
+
+static int flexcop_module_init(void)
+{
+ info(DRIVER_NAME " loaded successfully");
+ return 0;
+}
+
+static void flexcop_module_cleanup(void)
+{
+ info(DRIVER_NAME " unloaded successfully");
+}
+
+module_init(flexcop_module_init);
+module_exit(flexcop_module_cleanup);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_NAME);
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/b2c2/flexcop.h b/drivers/media/dvb/b2c2/flexcop.h
new file mode 100644
index 0000000..caa343a
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop.h
@@ -0,0 +1,30 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop.h - private header file for all flexcop-chip-source files.
+ *
+ * see flexcop.c for copyright information.
+ */
+#ifndef __FLEXCOP_H__
+#define __FLEXCOP_H___
+
+#define FC_LOG_PREFIX "b2c2-flexcop"
+#include "flexcop-common.h"
+
+extern int b2c2_flexcop_debug;
+
+/* debug */
+#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+#define dprintk(level,args...) \
+ do { if ((b2c2_flexcop_debug & level)) printk(args); } while (0)
+#else
+#define dprintk(level,args...)
+#endif
+
+#define deb_info(args...) dprintk(0x01,args)
+#define deb_tuner(args...) dprintk(0x02,args)
+#define deb_i2c(args...) dprintk(0x04,args)
+#define deb_ts(args...) dprintk(0x08,args)
+#define deb_sram(args...) dprintk(0x10,args)
+
+#endif
diff --git a/drivers/media/dvb/b2c2/skystar2.c b/drivers/media/dvb/b2c2/skystar2.c
index 336c178..acbc4c3 100644
--- a/drivers/media/dvb/b2c2/skystar2.c
+++ b/drivers/media/dvb/b2c2/skystar2.c
@@ -97,7 +97,7 @@
u8 mac_addr[8];
u32 dw_sram_type;
- struct dvb_adapter *dvb_adapter;
+ struct dvb_adapter dvb_adapter;
struct dvb_demux demux;
struct dmxdev dmxdev;
struct dmx_frontend hw_frontend;
@@ -2461,7 +2461,7 @@
skystar2->pdev->subsystem_vendor,
skystar2->pdev->subsystem_device);
} else {
- if (dvb_register_frontend(skystar2->dvb_adapter, skystar2->fe)) {
+ if (dvb_register_frontend(&skystar2->dvb_adapter, skystar2->fe)) {
printk("skystar2: Frontend registration failed!\n");
if (skystar2->fe->ops->release)
skystar2->fe->ops->release(skystar2->fe);
@@ -2486,17 +2486,17 @@
if (ret < 0)
goto out;
- ret = dvb_register_adapter(&dvb_adapter, skystar2_pci_driver.name,
+ adapter = pci_get_drvdata(pdev);
+ dvb_adapter = &adapter->dvb_adapter;
+
+ ret = dvb_register_adapter(dvb_adapter, skystar2_pci_driver.name,
THIS_MODULE);
if (ret < 0) {
printk("%s: Error registering DVB adapter\n", __FUNCTION__);
goto err_halt;
}
- adapter = pci_get_drvdata(pdev);
-
dvb_adapter->priv = adapter;
- adapter->dvb_adapter = dvb_adapter;
init_MUTEX(&adapter->i2c_sem);
@@ -2541,7 +2541,7 @@
adapter->dmxdev.demux = dmx;
adapter->dmxdev.capabilities = 0;
- ret = dvb_dmxdev_init(&adapter->dmxdev, adapter->dvb_adapter);
+ ret = dvb_dmxdev_init(&adapter->dmxdev, &adapter->dvb_adapter);
if (ret < 0)
goto err_dmx_release;
@@ -2559,7 +2559,7 @@
if (ret < 0)
goto err_remove_mem_frontend;
- dvb_net_init(adapter->dvb_adapter, &adapter->dvbnet, &dvbdemux->dmx);
+ dvb_net_init(&adapter->dvb_adapter, &adapter->dvbnet, &dvbdemux->dmx);
frontend_init(adapter);
out:
@@ -2576,7 +2576,7 @@
err_i2c_del:
i2c_del_adapter(&adapter->i2c_adap);
err_dvb_unregister:
- dvb_unregister_adapter(adapter->dvb_adapter);
+ dvb_unregister_adapter(&adapter->dvb_adapter);
err_halt:
driver_halt(pdev);
goto out;
@@ -2605,7 +2605,7 @@
if (adapter->fe != NULL)
dvb_unregister_frontend(adapter->fe);
- dvb_unregister_adapter(adapter->dvb_adapter);
+ dvb_unregister_adapter(&adapter->dvb_adapter);
i2c_del_adapter(&adapter->i2c_adap);
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index e7d11e0..b12545f 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -11,9 +11,8 @@
the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards and
pcHDTV HD2000 cards.
- Since these cards have no MPEG decoder onboard, they transmit
+ Since these cards have no MPEG decoder onboard, they transmit
only compressed MPEG data over the PCI bus, so you need
an external software decoder to watch TV on your computer.
Say Y if you own such a device and want to use it.
-
diff --git a/drivers/media/dvb/bt8xx/Makefile b/drivers/media/dvb/bt8xx/Makefile
index 9da8604..d188e4c 100644
--- a/drivers/media/dvb/bt8xx/Makefile
+++ b/drivers/media/dvb/bt8xx/Makefile
@@ -1,5 +1,3 @@
-
-obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o
+obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o dst_ca.o
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/video -Idrivers/media/dvb/frontends
-
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index 213ff79..3c5a8e2 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -4,27 +4,27 @@
* Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@t-online.de>
*
* large parts based on the bttv driver
- * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
- * & Marcus Metzler (mocm@thp.uni-koeln.de)
+ * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@metzlerbros.de)
+ * & Marcus Metzler (mocm@metzlerbros.de)
* (c) 1999,2000 Gerd Knorr <kraxel@goldbach.in-berlin.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
- *
+ *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
+ *
*/
#include <linux/module.h>
@@ -58,7 +58,7 @@
MODULE_PARM_DESC(verbose,
"verbose startup messages, default is 1 (yes)");
module_param_named(debug, bt878_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+MODULE_PARM_DESC(debug, "Turn on/off debugging, default is 0 (off).");
int bt878_num;
struct bt878 bt878[BT878_MAX];
@@ -128,21 +128,21 @@
}
/* RISC instructions */
-#define RISC_WRITE (0x01 << 28)
-#define RISC_JUMP (0x07 << 28)
-#define RISC_SYNC (0x08 << 28)
+#define RISC_WRITE (0x01 << 28)
+#define RISC_JUMP (0x07 << 28)
+#define RISC_SYNC (0x08 << 28)
/* RISC bits */
-#define RISC_WR_SOL (1 << 27)
-#define RISC_WR_EOL (1 << 26)
-#define RISC_IRQ (1 << 24)
+#define RISC_WR_SOL (1 << 27)
+#define RISC_WR_EOL (1 << 26)
+#define RISC_IRQ (1 << 24)
#define RISC_STATUS(status) ((((~status) & 0x0F) << 20) | ((status & 0x0F) << 16))
-#define RISC_SYNC_RESYNC (1 << 15)
-#define RISC_SYNC_FM1 0x06
-#define RISC_SYNC_VRO 0x0C
+#define RISC_SYNC_RESYNC (1 << 15)
+#define RISC_SYNC_FM1 0x06
+#define RISC_SYNC_VRO 0x0C
#define RISC_FLUSH() bt->risc_pos = 0
-#define RISC_INSTR(instr) bt->risc_cpu[bt->risc_pos++] = cpu_to_le32(instr)
+#define RISC_INSTR(instr) bt->risc_cpu[bt->risc_pos++] = cpu_to_le32(instr)
static int bt878_make_risc(struct bt878 *bt)
{
@@ -173,7 +173,7 @@
RISC_INSTR(RISC_SYNC | RISC_SYNC_FM1 | op_sync_orin);
RISC_INSTR(0);
- dprintk("bt878: risc len lines %u, bytes per line %u\n",
+ dprintk("bt878: risc len lines %u, bytes per line %u\n",
bt->line_count, bt->line_bytes);
for (line = 0; line < bt->line_count; line++) {
// At the beginning of every block we issue an IRQ with previous (finished) block number set
@@ -228,14 +228,14 @@
* Hacked for DST to:
* SCERR | OCERR | FDSR | FTRGT | FBUS | RISCI
*/
- int_mask = BT878_ASCERR | BT878_AOCERR | BT878_APABORT |
- BT878_ARIPERR | BT878_APPERR | BT878_AFDSR | BT878_AFTRGT |
+ int_mask = BT878_ASCERR | BT878_AOCERR | BT878_APABORT |
+ BT878_ARIPERR | BT878_APPERR | BT878_AFDSR | BT878_AFTRGT |
BT878_AFBUS | BT878_ARISCI;
/* ignore pesky bits */
int_mask &= ~irq_err_ignore;
-
+
btwrite(int_mask, BT878_AINT_MASK);
btwrite(controlreg, BT878_AGPIO_DMA_CTL);
}
@@ -461,9 +461,9 @@
pci_set_drvdata(dev, bt);
/* if(init_bt878(btv) < 0) {
- bt878_remove(dev);
- return -EIO;
- }
+ bt878_remove(dev);
+ return -EIO;
+ }
*/
if ((result = bt878_mem_alloc(bt))) {
@@ -536,10 +536,10 @@
MODULE_DEVICE_TABLE(pci, bt878_pci_tbl);
static struct pci_driver bt878_pci_driver = {
- .name = "bt878",
+ .name = "bt878",
.id_table = bt878_pci_tbl,
- .probe = bt878_probe,
- .remove = bt878_remove,
+ .probe = bt878_probe,
+ .remove = bt878_remove,
};
static int bt878_pci_driver_registered = 0;
@@ -558,7 +558,7 @@
(BT878_VERSION_CODE >> 8) & 0xff,
BT878_VERSION_CODE & 0xff);
/*
- bt878_check_chipset();
+ bt878_check_chipset();
*/
/* later we register inside of bt878_find_audio_dma()
* because we may want to ignore certain cards */
diff --git a/drivers/media/dvb/bt8xx/bt878.h b/drivers/media/dvb/bt8xx/bt878.h
index e1b9809..837623f 100644
--- a/drivers/media/dvb/bt8xx/bt878.h
+++ b/drivers/media/dvb/bt8xx/bt878.h
@@ -1,4 +1,4 @@
-/*
+/*
bt878.h - Bt878 audio module (register offsets)
Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@t-online.de>
@@ -120,14 +120,14 @@
u32 risc_pos;
struct tasklet_struct tasklet;
- int shutdown;
+ int shutdown;
};
extern struct bt878 bt878[BT878_MAX];
void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin,
u32 irq_err_ignore);
-void bt878_stop(struct bt878 *bt);
+void bt878_stop(struct bt878 *bt);
#if defined(__powerpc__) /* big-endian */
extern __inline__ void io_st_le32(volatile unsigned __iomem *addr, unsigned val)
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index eac8376..1339912 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -1,25 +1,25 @@
/*
- Frontend-driver for TwinHan DST Frontend
- Copyright (C) 2003 Jamie Honan
+ Frontend/Card driver for TwinHan DST Frontend
+ Copyright (C) 2003 Jamie Honan
+ Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -31,59 +31,22 @@
#include "dvb_frontend.h"
#include "dst_priv.h"
-#include "dst.h"
+#include "dst_common.h"
-struct dst_state {
- struct i2c_adapter* i2c;
+static unsigned int verbose = 1;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
- struct bt878* bt;
+static unsigned int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug messages, default is 0 (yes)");
- struct dvb_frontend_ops ops;
+static unsigned int dst_addons;
+module_param(dst_addons, int, 0644);
+MODULE_PARM_DESC(dst_addons, "CA daughterboard, default is 0 (No addons)");
- /* configuration settings */
- const struct dst_config* config;
-
- struct dvb_frontend frontend;
-
- /* private demodulator data */
- u8 tx_tuna[10];
- u8 rx_tuna[10];
- u8 rxbuffer[10];
- u8 diseq_flags;
- u8 dst_type;
- u32 type_flags;
- u32 frequency; /* intermediate frequency in kHz for QPSK */
- fe_spectral_inversion_t inversion;
- u32 symbol_rate; /* symbol rate in Symbols per second */
- fe_code_rate_t fec;
- fe_sec_voltage_t voltage;
- fe_sec_tone_mode_t tone;
- u32 decode_freq;
- u8 decode_lock;
- u16 decode_strength;
- u16 decode_snr;
- unsigned long cur_jiff;
- u8 k22;
- fe_bandwidth_t bandwidth;
-};
-
-static unsigned int dst_verbose = 0;
-module_param(dst_verbose, int, 0644);
-MODULE_PARM_DESC(dst_verbose, "verbose startup messages, default is 1 (yes)");
-static unsigned int dst_debug = 0;
-module_param(dst_debug, int, 0644);
-MODULE_PARM_DESC(dst_debug, "debug messages, default is 0 (no)");
-
-#define dprintk if (dst_debug) printk
-
-#define DST_TYPE_IS_SAT 0
-#define DST_TYPE_IS_TERR 1
-#define DST_TYPE_IS_CABLE 2
-
-#define DST_TYPE_HAS_NEWTUNE 1
-#define DST_TYPE_HAS_TS204 2
-#define DST_TYPE_HAS_SYMDIV 4
+#define dprintk if (debug) printk
#define HAS_LOCK 1
#define ATTEMPT_TUNE 2
@@ -97,7 +60,7 @@
bt878_device_control(state->bt, DST_IG_TS, &bits);
}
-static int dst_gpio_outb(struct dst_state* state, u32 mask, u32 enbb, u32 outhigh)
+int dst_gpio_outb(struct dst_state* state, u32 mask, u32 enbb, u32 outhigh, int delay)
{
union dst_gpio_packet enb;
union dst_gpio_packet bits;
@@ -105,26 +68,33 @@
enb.enb.mask = mask;
enb.enb.enable = enbb;
+ if (verbose > 4)
+ dprintk("%s: mask=[%04x], enbb=[%04x], outhigh=[%04x]\n", __FUNCTION__, mask, enbb, outhigh);
+
if ((err = bt878_device_control(state->bt, DST_IG_ENABLE, &enb)) < 0) {
- dprintk("%s: dst_gpio_enb error (err == %i, mask == 0x%02x, enb == 0x%02x)\n", __FUNCTION__, err, mask, enbb);
+ dprintk("%s: dst_gpio_enb error (err == %i, mask == %02x, enb == %02x)\n", __FUNCTION__, err, mask, enbb);
return -EREMOTEIO;
}
-
+ udelay(1000);
/* because complete disabling means no output, no need to do output packet */
if (enbb == 0)
return 0;
+ if (delay)
+ msleep(10);
+
bits.outp.mask = enbb;
bits.outp.highvals = outhigh;
if ((err = bt878_device_control(state->bt, DST_IG_WRITE, &bits)) < 0) {
- dprintk("%s: dst_gpio_outb error (err == %i, enbb == 0x%02x, outhigh == 0x%02x)\n", __FUNCTION__, err, enbb, outhigh);
+ dprintk("%s: dst_gpio_outb error (err == %i, enbb == %02x, outhigh == %02x)\n", __FUNCTION__, err, enbb, outhigh);
return -EREMOTEIO;
}
return 0;
}
+EXPORT_SYMBOL(dst_gpio_outb);
-static int dst_gpio_inb(struct dst_state *state, u8 * result)
+int dst_gpio_inb(struct dst_state *state, u8 * result)
{
union dst_gpio_packet rd_packet;
int err;
@@ -139,143 +109,225 @@
*result = (u8) rd_packet.rd.value;
return 0;
}
+EXPORT_SYMBOL(dst_gpio_inb);
-#define DST_I2C_ENABLE 1
-#define DST_8820 2
-
-static int dst_reset8820(struct dst_state *state)
+int rdc_reset_state(struct dst_state *state)
{
- int retval;
- /* pull 8820 gpio pin low, wait, high, wait, then low */
- // dprintk ("%s: reset 8820\n", __FUNCTION__);
- retval = dst_gpio_outb(state, DST_8820, DST_8820, 0);
- if (retval < 0)
- return retval;
+ if (verbose > 1)
+ dprintk("%s: Resetting state machine\n", __FUNCTION__);
+
+ if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, 0, NO_DELAY) < 0) {
+ dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__);
+ return -1;
+ }
+
msleep(10);
- retval = dst_gpio_outb(state, DST_8820, DST_8820, DST_8820);
- if (retval < 0)
- return retval;
- /* wait for more feedback on what works here *
- msleep(10);
- retval = dst_gpio_outb(dst, DST_8820, DST_8820, 0);
- if (retval < 0)
- return retval;
- */
+
+ if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, RDC_8820_INT, NO_DELAY) < 0) {
+ dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__);
+ msleep(10);
+ return -1;
+ }
+
return 0;
}
+EXPORT_SYMBOL(rdc_reset_state);
-static int dst_i2c_enable(struct dst_state *state)
+int rdc_8820_reset(struct dst_state *state)
{
- int retval;
- /* pull I2C enable gpio pin low, wait */
- // dprintk ("%s: i2c enable\n", __FUNCTION__);
- retval = dst_gpio_outb(state, ~0, DST_I2C_ENABLE, 0);
- if (retval < 0)
- return retval;
- // dprintk ("%s: i2c enable delay\n", __FUNCTION__);
- msleep(33);
+ if (verbose > 1)
+ dprintk("%s: Resetting DST\n", __FUNCTION__);
+
+ if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, 0, NO_DELAY) < 0) {
+ dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__);
+ return -1;
+ }
+ udelay(1000);
+ if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, RDC_8820_RESET, DELAY) < 0) {
+ dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__);
+ return -1;
+ }
+
return 0;
}
+EXPORT_SYMBOL(rdc_8820_reset);
-static int dst_i2c_disable(struct dst_state *state)
+int dst_pio_enable(struct dst_state *state)
{
- int retval;
- /* release I2C enable gpio pin, wait */
- // dprintk ("%s: i2c disable\n", __FUNCTION__);
- retval = dst_gpio_outb(state, ~0, 0, 0);
- if (retval < 0)
- return retval;
- // dprintk ("%s: i2c disable delay\n", __FUNCTION__);
- msleep(33);
+ if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_ENABLE, 0, NO_DELAY) < 0) {
+ dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__);
+ return -1;
+ }
+ udelay(1000);
return 0;
}
+EXPORT_SYMBOL(dst_pio_enable);
-static int dst_wait_dst_ready(struct dst_state *state)
+int dst_pio_disable(struct dst_state *state)
+{
+ if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_DISABLE, RDC_8820_PIO_0_DISABLE, NO_DELAY) < 0) {
+ dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__);
+ return -1;
+ }
+ if (state->type_flags & DST_TYPE_HAS_FW_1)
+ udelay(1000);
+
+ return 0;
+}
+EXPORT_SYMBOL(dst_pio_disable);
+
+int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode)
{
u8 reply;
- int retval;
int i;
+
for (i = 0; i < 200; i++) {
- retval = dst_gpio_inb(state, &reply);
- if (retval < 0)
- return retval;
- if ((reply & DST_I2C_ENABLE) == 0) {
- dprintk("%s: dst wait ready after %d\n", __FUNCTION__, i);
+ if (dst_gpio_inb(state, &reply) < 0) {
+ dprintk("%s: dst_gpio_inb ERROR !\n", __FUNCTION__);
+ return -1;
+ }
+
+ if ((reply & RDC_8820_PIO_0_ENABLE) == 0) {
+ if (verbose > 4)
+ dprintk("%s: dst wait ready after %d\n", __FUNCTION__, i);
return 1;
}
msleep(10);
}
- dprintk("%s: dst wait NOT ready after %d\n", __FUNCTION__, i);
+ if (verbose > 1)
+ dprintk("%s: dst wait NOT ready after %d\n", __FUNCTION__, i);
+
return 0;
}
+EXPORT_SYMBOL(dst_wait_dst_ready);
-static int write_dst(struct dst_state *state, u8 * data, u8 len)
+int dst_error_recovery(struct dst_state *state)
+{
+ dprintk("%s: Trying to return from previous errors...\n", __FUNCTION__);
+ dst_pio_disable(state);
+ msleep(10);
+ dst_pio_enable(state);
+ msleep(10);
+
+ return 0;
+}
+EXPORT_SYMBOL(dst_error_recovery);
+
+int dst_error_bailout(struct dst_state *state)
+{
+ dprintk("%s: Trying to bailout from previous error...\n", __FUNCTION__);
+ rdc_8820_reset(state);
+ dst_pio_disable(state);
+ msleep(10);
+
+ return 0;
+}
+EXPORT_SYMBOL(dst_error_bailout);
+
+
+int dst_comm_init(struct dst_state* state)
+{
+ if (verbose > 1)
+ dprintk ("%s: Initializing DST..\n", __FUNCTION__);
+ if ((dst_pio_enable(state)) < 0) {
+ dprintk("%s: PIO Enable Failed.\n", __FUNCTION__);
+ return -1;
+ }
+ if ((rdc_reset_state(state)) < 0) {
+ dprintk("%s: RDC 8820 State RESET Failed.\n", __FUNCTION__);
+ return -1;
+ }
+ if (state->type_flags & DST_TYPE_HAS_FW_1)
+ msleep(100);
+ else
+ msleep(5);
+
+ return 0;
+}
+EXPORT_SYMBOL(dst_comm_init);
+
+
+int write_dst(struct dst_state *state, u8 *data, u8 len)
{
struct i2c_msg msg = {
.addr = state->config->demod_address,.flags = 0,.buf = data,.len = len
};
+
int err;
int cnt;
-
- if (dst_debug && dst_verbose) {
+ if (debug && (verbose > 4)) {
u8 i;
- dprintk("%s writing", __FUNCTION__);
- for (i = 0; i < len; i++) {
- dprintk(" 0x%02x", data[i]);
+ if (verbose > 4) {
+ dprintk("%s writing", __FUNCTION__);
+ for (i = 0; i < len; i++)
+ dprintk(" %02x", data[i]);
+ dprintk("\n");
}
- dprintk("\n");
}
- msleep(30);
- for (cnt = 0; cnt < 4; cnt++) {
+ for (cnt = 0; cnt < 2; cnt++) {
if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) {
- dprintk("%s: write_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)\n", __FUNCTION__, err, len, data[0]);
- dst_i2c_disable(state);
- msleep(500);
- dst_i2c_enable(state);
- msleep(500);
+ dprintk("%s: _write_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)\n", __FUNCTION__, err, len, data[0]);
+ dst_error_recovery(state);
continue;
} else
break;
}
- if (cnt >= 4)
- return -EREMOTEIO;
+
+ if (cnt >= 2) {
+ if (verbose > 1)
+ printk("%s: RDC 8820 RESET...\n", __FUNCTION__);
+ dst_error_bailout(state);
+
+ return -1;
+ }
+
return 0;
}
+EXPORT_SYMBOL(write_dst);
-static int read_dst(struct dst_state *state, u8 * ret, u8 len)
+int read_dst(struct dst_state *state, u8 * ret, u8 len)
{
struct i2c_msg msg = {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = ret,.len = len };
int err;
int cnt;
- for (cnt = 0; cnt < 4; cnt++) {
+ for (cnt = 0; cnt < 2; cnt++) {
if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) {
+
dprintk("%s: read_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)\n", __FUNCTION__, err, len, ret[0]);
- dst_i2c_disable(state);
- dst_i2c_enable(state);
+ dst_error_recovery(state);
+
continue;
} else
break;
}
- if (cnt >= 4)
- return -EREMOTEIO;
- dprintk("%s reply is 0x%x\n", __FUNCTION__, ret[0]);
- if (dst_debug && dst_verbose) {
+ if (cnt >= 2) {
+ if (verbose > 1)
+ printk("%s: RDC 8820 RESET...\n", __FUNCTION__);
+ dst_error_bailout(state);
+
+ return -1;
+ }
+ if (debug && (verbose > 4)) {
+ dprintk("%s reply is 0x%x\n", __FUNCTION__, ret[0]);
for (err = 1; err < len; err++)
dprintk(" 0x%x", ret[err]);
if (err > 1)
dprintk("\n");
}
+
return 0;
}
+EXPORT_SYMBOL(read_dst);
static int dst_set_freq(struct dst_state *state, u32 freq)
{
u8 *val;
state->frequency = freq;
+ if (debug > 4)
+ dprintk("%s: set Frequency %u\n", __FUNCTION__, freq);
- // dprintk("%s: set frequency %u\n", __FUNCTION__, freq);
if (state->dst_type == DST_TYPE_IS_SAT) {
freq = freq / 1000;
if (freq < 950 || freq > 2150)
@@ -398,7 +450,8 @@
if (state->dst_type == DST_TYPE_IS_TERR) {
return 0;
}
- // dprintk("%s: set srate %u\n", __FUNCTION__, srate);
+ if (debug > 4)
+ dprintk("%s: set symrate %u\n", __FUNCTION__, srate);
srate /= 1000;
val = &state->tx_tuna[0];
@@ -407,7 +460,10 @@
sval <<= 20;
do_div(sval, 88000);
symcalc = (u32) sval;
- // dprintk("%s: set symcalc %u\n", __FUNCTION__, symcalc);
+
+ if (debug > 4)
+ dprintk("%s: set symcalc %u\n", __FUNCTION__, symcalc);
+
val[5] = (u8) (symcalc >> 12);
val[6] = (u8) (symcalc >> 4);
val[7] = (u8) (symcalc << 4);
@@ -422,7 +478,7 @@
return 0;
}
-static u8 dst_check_sum(u8 * buf, u32 len)
+u8 dst_check_sum(u8 * buf, u32 len)
{
u32 i;
u8 val = 0;
@@ -433,28 +489,7 @@
}
return ((~val) + 1);
}
-
-struct dst_types {
- char *mstr;
- int offs;
- u8 dst_type;
- u32 type_flags;
-};
-
-static struct dst_types dst_tlist[] = {
- {"DST-020", 0, DST_TYPE_IS_SAT, DST_TYPE_HAS_SYMDIV},
- {"DST-030", 0, DST_TYPE_IS_SAT, DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE},
- {"DST-03T", 0, DST_TYPE_IS_SAT, DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_TS204},
- {"DST-MOT", 0, DST_TYPE_IS_SAT, DST_TYPE_HAS_SYMDIV},
- {"DST-CI", 1, DST_TYPE_IS_SAT, DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE},
- {"DSTMCI", 1, DST_TYPE_IS_SAT, DST_TYPE_HAS_NEWTUNE},
- {"DSTFCI", 1, DST_TYPE_IS_SAT, DST_TYPE_HAS_NEWTUNE},
- {"DCTNEW", 1, DST_TYPE_IS_CABLE, DST_TYPE_HAS_NEWTUNE},
- {"DCT-CI", 1, DST_TYPE_IS_CABLE, DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_TS204},
- {"DTTDIG", 1, DST_TYPE_IS_TERR, 0}
-};
-
-/* DCTNEW and DCT-CI are guesses */
+EXPORT_SYMBOL(dst_check_sum);
static void dst_type_flags_print(u32 type_flags)
{
@@ -465,93 +500,270 @@
printk(" 0x%x ts204", DST_TYPE_HAS_TS204);
if (type_flags & DST_TYPE_HAS_SYMDIV)
printk(" 0x%x symdiv", DST_TYPE_HAS_SYMDIV);
+ if (type_flags & DST_TYPE_HAS_FW_1)
+ printk(" 0x%x firmware version = 1", DST_TYPE_HAS_FW_1);
+ if (type_flags & DST_TYPE_HAS_FW_2)
+ printk(" 0x%x firmware version = 2", DST_TYPE_HAS_FW_2);
+ if (type_flags & DST_TYPE_HAS_FW_3)
+ printk(" 0x%x firmware version = 3", DST_TYPE_HAS_FW_3);
+// if ((type_flags & DST_TYPE_HAS_FW_BUILD) && new_fw)
+
printk("\n");
}
-static int dst_type_print(u8 type)
+
+static int dst_type_print (u8 type)
{
char *otype;
switch (type) {
case DST_TYPE_IS_SAT:
otype = "satellite";
break;
+
case DST_TYPE_IS_TERR:
otype = "terrestrial";
break;
+
case DST_TYPE_IS_CABLE:
otype = "cable";
break;
+
default:
printk("%s: invalid dst type %d\n", __FUNCTION__, type);
return -EINVAL;
}
printk("DST type : %s\n", otype);
+
return 0;
}
-static int dst_check_ci(struct dst_state *state)
+/*
+ Known cards list
+ Satellite
+ -------------------
+ 200103A
+ VP-1020 DST-MOT LG(old), TS=188
+
+ VP-1020 DST-03T LG(new), TS=204
+ VP-1022 DST-03T LG(new), TS=204
+ VP-1025 DST-03T LG(new), TS=204
+
+ VP-1030 DSTMCI, LG(new), TS=188
+ VP-1032 DSTMCI, LG(new), TS=188
+
+ Cable
+ -------------------
+ VP-2030 DCT-CI, Samsung, TS=204
+ VP-2021 DCT-CI, Unknown, TS=204
+ VP-2031 DCT-CI, Philips, TS=188
+ VP-2040 DCT-CI, Philips, TS=188, with CA daughter board
+ VP-2040 DCT-CI, Philips, TS=204, without CA daughter board
+
+ Terrestrial
+ -------------------
+ VP-3050 DTTNXT TS=188
+ VP-3040 DTT-CI, Philips, TS=188
+ VP-3040 DTT-CI, Philips, TS=204
+
+ ATSC
+ -------------------
+ VP-3220 ATSCDI, TS=188
+ VP-3250 ATSCAD, TS=188
+
+*/
+
+struct dst_types dst_tlist[] = {
+ {
+ .device_id = "200103A",
+ .offset = 0,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1,
+ .dst_feature = 0
+ }, /* obsolete */
+
+ {
+ .device_id = "DST-020",
+ .offset = 0,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1,
+ .dst_feature = 0
+ }, /* obsolete */
+
+ {
+ .device_id = "DST-030",
+ .offset = 0,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1,
+ .dst_feature = 0
+ }, /* obsolete */
+
+ {
+ .device_id = "DST-03T",
+ .offset = 0,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_2,
+ .dst_feature = DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4 | DST_TYPE_HAS_DISEQC5
+ | DST_TYPE_HAS_MAC | DST_TYPE_HAS_MOTO
+ },
+
+ {
+ .device_id = "DST-MOT",
+ .offset = 0,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1,
+ .dst_feature = 0
+ }, /* obsolete */
+
+ {
+ .device_id = "DST-CI",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1,
+ .dst_feature = DST_TYPE_HAS_CA
+ }, /* An OEM board */
+
+ {
+ .device_id = "DSTMCI",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD,
+ .dst_feature = DST_TYPE_HAS_CA | DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4
+ | DST_TYPE_HAS_MOTO | DST_TYPE_HAS_MAC
+ },
+
+ {
+ .device_id = "DSTFCI",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1,
+ .dst_feature = 0
+ }, /* unknown to vendor */
+
+ {
+ .device_id = "DCT-CI",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_CABLE,
+ .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1
+ | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD,
+ .dst_feature = DST_TYPE_HAS_CA
+ },
+
+ {
+ .device_id = "DCTNEW",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_CABLE,
+ .type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_3,
+ .dst_feature = 0
+ },
+
+ {
+ .device_id = "DTT-CI",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_TERR,
+ .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD,
+ .dst_feature = 0
+ },
+
+ {
+ .device_id = "DTTDIG",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_TERR,
+ .type_flags = DST_TYPE_HAS_FW_2,
+ .dst_feature = 0
+ },
+
+ {
+ .device_id = "DTTNXT",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_TERR,
+ .type_flags = DST_TYPE_HAS_FW_2,
+ .dst_feature = DST_TYPE_HAS_ANALOG
+ },
+
+ {
+ .device_id = "ATSCDI",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_ATSC,
+ .type_flags = DST_TYPE_HAS_FW_2,
+ .dst_feature = 0
+ },
+
+ {
+ .device_id = "ATSCAD",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_ATSC,
+ .type_flags = DST_TYPE_HAS_FW_2,
+ .dst_feature = 0
+ },
+
+ { }
+
+};
+
+
+static int dst_get_device_id(struct dst_state *state)
{
- u8 txbuf[8];
- u8 rxbuf[8];
- int retval;
+ u8 reply;
+
int i;
- struct dst_types *dsp;
- u8 use_dst_type;
- u32 use_type_flags;
+ struct dst_types *p_dst_type;
+ u8 use_dst_type = 0;
+ u32 use_type_flags = 0;
- memset(txbuf, 0, sizeof(txbuf));
- txbuf[1] = 6;
- txbuf[7] = dst_check_sum(txbuf, 7);
+ static u8 device_type[8] = {0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff};
- dst_i2c_enable(state);
- dst_reset8820(state);
- retval = write_dst(state, txbuf, 8);
- if (retval < 0) {
- dst_i2c_disable(state);
- dprintk("%s: write not successful, maybe no card?\n", __FUNCTION__);
- return retval;
+ device_type[7] = dst_check_sum(device_type, 7);
+
+ if (write_dst(state, device_type, FIXED_COMM))
+ return -1; /* Write failed */
+
+ if ((dst_pio_disable(state)) < 0)
+ return -1;
+
+ if (read_dst(state, &reply, GET_ACK))
+ return -1; /* Read failure */
+
+ if (reply != ACK) {
+ dprintk("%s: Write not Acknowledged! [Reply=0x%02x]\n", __FUNCTION__, reply);
+ return -1; /* Unack'd write */
}
- msleep(3);
- retval = read_dst(state, rxbuf, 1);
- dst_i2c_disable(state);
- if (retval < 0) {
- dprintk("%s: read not successful, maybe no card?\n", __FUNCTION__);
- return retval;
+
+ if (!dst_wait_dst_ready(state, DEVICE_INIT))
+ return -1; /* DST not ready yet */
+
+ if (read_dst(state, state->rxbuffer, FIXED_COMM))
+ return -1;
+
+ dst_pio_disable(state);
+
+ if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) {
+ dprintk("%s: Checksum failure! \n", __FUNCTION__);
+ return -1; /* Checksum failure */
}
- if (rxbuf[0] != 0xff) {
- dprintk("%s: write reply not 0xff, not ci (%02x)\n", __FUNCTION__, rxbuf[0]);
- return retval;
- }
- if (!dst_wait_dst_ready(state))
- return 0;
- // dst_i2c_enable(i2c); Dimitri
- retval = read_dst(state, rxbuf, 8);
- dst_i2c_disable(state);
- if (retval < 0) {
- dprintk("%s: read not successful\n", __FUNCTION__);
- return retval;
- }
- if (rxbuf[7] != dst_check_sum(rxbuf, 7)) {
- dprintk("%s: checksum failure\n", __FUNCTION__);
- return retval;
- }
- rxbuf[7] = '\0';
- for (i = 0, dsp = &dst_tlist[0]; i < sizeof(dst_tlist) / sizeof(dst_tlist[0]); i++, dsp++) {
- if (!strncmp(&rxbuf[dsp->offs], dsp->mstr, strlen(dsp->mstr))) {
- use_type_flags = dsp->type_flags;
- use_dst_type = dsp->dst_type;
- printk("%s: recognize %s\n", __FUNCTION__, dsp->mstr);
+
+ state->rxbuffer[7] = '\0';
+
+ for (i = 0, p_dst_type = dst_tlist; i < ARRAY_SIZE (dst_tlist); i++, p_dst_type++) {
+ if (!strncmp (&state->rxbuffer[p_dst_type->offset], p_dst_type->device_id, strlen (p_dst_type->device_id))) {
+ use_type_flags = p_dst_type->type_flags;
+ use_dst_type = p_dst_type->dst_type;
+
+ /* Card capabilities */
+ state->dst_hw_cap = p_dst_type->dst_feature;
+ printk ("%s: Recognise [%s]\n", __FUNCTION__, p_dst_type->device_id);
+
break;
}
}
- if (i >= sizeof(dst_tlist) / sizeof(dst_tlist[0])) {
- printk("%s: unable to recognize %s or %s\n", __FUNCTION__, &rxbuf[0], &rxbuf[1]);
- printk("%s please email linux-dvb@linuxtv.org with this type in\n", __FUNCTION__);
+
+ if (i >= sizeof (dst_tlist) / sizeof (dst_tlist [0])) {
+ printk("%s: Unable to recognize %s or %s\n", __FUNCTION__, &state->rxbuffer[0], &state->rxbuffer[1]);
+ printk("%s: please email linux-dvb@linuxtv.org with this type in\n", __FUNCTION__);
use_dst_type = DST_TYPE_IS_SAT;
use_type_flags = DST_TYPE_HAS_SYMDIV;
}
- dst_type_print(use_dst_type);
+ dst_type_print(use_dst_type);
state->type_flags = use_type_flags;
state->dst_type = use_dst_type;
dst_type_flags_print(state->type_flags);
@@ -559,50 +771,102 @@
if (state->type_flags & DST_TYPE_HAS_TS204) {
dst_packsize(state, 204);
}
+
return 0;
}
-static int dst_command(struct dst_state* state, u8 * data, u8 len)
+static int dst_probe(struct dst_state *state)
{
- int retval;
- u8 reply;
+ if ((rdc_8820_reset(state)) < 0) {
+ dprintk("%s: RDC 8820 RESET Failed.\n", __FUNCTION__);
+ return -1;
+ }
+ if (dst_addons & DST_TYPE_HAS_CA)
+ msleep(4000);
+ else
+ msleep(100);
- dst_i2c_enable(state);
- dst_reset8820(state);
- retval = write_dst(state, data, len);
- if (retval < 0) {
- dst_i2c_disable(state);
- dprintk("%s: write not successful\n", __FUNCTION__);
- return retval;
+ if ((dst_comm_init(state)) < 0) {
+ dprintk("%s: DST Initialization Failed.\n", __FUNCTION__);
+ return -1;
}
- msleep(33);
- retval = read_dst(state, &reply, 1);
- dst_i2c_disable(state);
- if (retval < 0) {
- dprintk("%s: read verify not successful\n", __FUNCTION__);
- return retval;
+ msleep(100);
+ if (dst_get_device_id(state) < 0) {
+ dprintk("%s: unknown device.\n", __FUNCTION__);
+ return -1;
}
- if (reply != 0xff) {
- dprintk("%s: write reply not 0xff 0x%02x \n", __FUNCTION__, reply);
- return 0;
+
+ return 0;
+}
+
+int dst_command(struct dst_state* state, u8 * data, u8 len)
+{
+ u8 reply;
+ if ((dst_comm_init(state)) < 0) {
+ dprintk("%s: DST Communication Initialization Failed.\n", __FUNCTION__);
+ return -1;
+ }
+
+ if (write_dst(state, data, len)) {
+ if (verbose > 1)
+ dprintk("%s: Tring to recover.. \n", __FUNCTION__);
+ if ((dst_error_recovery(state)) < 0) {
+ dprintk("%s: Recovery Failed.\n", __FUNCTION__);
+ return -1;
+ }
+ return -1;
+ }
+ if ((dst_pio_disable(state)) < 0) {
+ dprintk("%s: PIO Disable Failed.\n", __FUNCTION__);
+ return -1;
+ }
+ if (state->type_flags & DST_TYPE_HAS_FW_1)
+ udelay(3000);
+
+ if (read_dst(state, &reply, GET_ACK)) {
+ if (verbose > 1)
+ dprintk("%s: Trying to recover.. \n", __FUNCTION__);
+ if ((dst_error_recovery(state)) < 0) {
+ dprintk("%s: Recovery Failed.\n", __FUNCTION__);
+ return -1;
+ }
+ return -1;
+ }
+
+ if (reply != ACK) {
+ dprintk("%s: write not acknowledged 0x%02x \n", __FUNCTION__, reply);
+ return -1;
}
if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3))
return 0;
- if (!dst_wait_dst_ready(state))
- return 0;
- // dst_i2c_enable(i2c); Per dimitri
- retval = read_dst(state, state->rxbuffer, 8);
- dst_i2c_disable(state);
- if (retval < 0) {
- dprintk("%s: read not successful\n", __FUNCTION__);
- return 0;
+
+// udelay(3000);
+ if (state->type_flags & DST_TYPE_HAS_FW_1)
+ udelay(3000);
+ else
+ udelay(2000);
+
+ if (!dst_wait_dst_ready(state, NO_DELAY))
+ return -1;
+
+ if (read_dst(state, state->rxbuffer, FIXED_COMM)) {
+ if (verbose > 1)
+ dprintk("%s: Trying to recover.. \n", __FUNCTION__);
+ if ((dst_error_recovery(state)) < 0) {
+ dprintk("%s: Recovery failed.\n", __FUNCTION__);
+ return -1;
+ }
+ return -1;
}
+
if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) {
dprintk("%s: checksum failure\n", __FUNCTION__);
- return 0;
+ return -1;
}
+
return 0;
}
+EXPORT_SYMBOL(dst_command);
static int dst_get_signal(struct dst_state* state)
{
@@ -642,37 +906,38 @@
if (state->dst_type == DST_TYPE_IS_TERR)
return 0;
- if (state->voltage == SEC_VOLTAGE_OFF)
- paket[4] = 0;
- else
- paket[4] = 1;
- if (state->tone == SEC_TONE_ON)
- paket[2] = state->k22;
- else
- paket[2] = 0;
- paket[7] = dst_check_sum(&paket[0], 7);
+ paket[4] = state->tx_tuna[4];
+ paket[2] = state->tx_tuna[2];
+ paket[3] = state->tx_tuna[3];
+ paket[7] = dst_check_sum (paket, 7);
dst_command(state, paket, 8);
+
return 0;
}
static int dst_get_tuna(struct dst_state* state)
{
int retval;
+
if ((state->diseq_flags & ATTEMPT_TUNE) == 0)
return 0;
+
state->diseq_flags &= ~(HAS_LOCK);
- if (!dst_wait_dst_ready(state))
+ if (!dst_wait_dst_ready(state, NO_DELAY))
return 0;
+
if (state->type_flags & DST_TYPE_HAS_NEWTUNE) {
/* how to get variable length reply ???? */
retval = read_dst(state, state->rx_tuna, 10);
} else {
- retval = read_dst(state, &state->rx_tuna[2], 8);
+ retval = read_dst(state, &state->rx_tuna[2], FIXED_COMM);
}
+
if (retval < 0) {
dprintk("%s: read not successful\n", __FUNCTION__);
return 0;
}
+
if (state->type_flags & DST_TYPE_HAS_NEWTUNE) {
if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
dprintk("%s: checksum failure?\n", __FUNCTION__);
@@ -705,11 +970,13 @@
static int dst_write_tuna(struct dvb_frontend* fe)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
int retval;
u8 reply;
- dprintk("%s: type_flags 0x%x \n", __FUNCTION__, state->type_flags);
+ if (debug > 4)
+ dprintk("%s: type_flags 0x%x \n", __FUNCTION__, state->type_flags);
+
state->decode_freq = 0;
state->decode_lock = state->decode_strength = state->decode_snr = 0;
if (state->dst_type == DST_TYPE_IS_SAT) {
@@ -717,32 +984,41 @@
dst_set_voltage(fe, SEC_VOLTAGE_13);
}
state->diseq_flags &= ~(HAS_LOCK | ATTEMPT_TUNE);
- dst_i2c_enable(state);
+
+ if ((dst_comm_init(state)) < 0) {
+ dprintk("%s: DST Communication initialization failed.\n", __FUNCTION__);
+ return -1;
+ }
+
if (state->type_flags & DST_TYPE_HAS_NEWTUNE) {
- dst_reset8820(state);
state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[0], 9);
retval = write_dst(state, &state->tx_tuna[0], 10);
+
} else {
state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[2], 7);
- retval = write_dst(state, &state->tx_tuna[2], 8);
+ retval = write_dst(state, &state->tx_tuna[2], FIXED_COMM);
}
if (retval < 0) {
- dst_i2c_disable(state);
+ dst_pio_disable(state);
dprintk("%s: write not successful\n", __FUNCTION__);
return retval;
}
- msleep(3);
- retval = read_dst(state, &reply, 1);
- dst_i2c_disable(state);
- if (retval < 0) {
- dprintk("%s: read verify not successful\n", __FUNCTION__);
- return retval;
+
+ if ((dst_pio_disable(state)) < 0) {
+ dprintk("%s: DST PIO disable failed !\n", __FUNCTION__);
+ return -1;
}
- if (reply != 0xff) {
- dprintk("%s: write reply not 0xff 0x%02x \n", __FUNCTION__, reply);
+
+ if ((read_dst(state, &reply, GET_ACK) < 0)) {
+ dprintk("%s: read verify not successful.\n", __FUNCTION__);
+ return -1;
+ }
+ if (reply != ACK) {
+ dprintk("%s: write not acknowledged 0x%02x \n", __FUNCTION__, reply);
return 0;
}
state->diseq_flags |= ATTEMPT_TUNE;
+
return dst_get_tuna(state);
}
@@ -762,10 +1038,10 @@
static int dst_set_diseqc(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec };
- if (state->dst_type == DST_TYPE_IS_TERR)
+ if (state->dst_type != DST_TYPE_IS_SAT)
return 0;
if (cmd->msg_len == 0 || cmd->msg_len > 4)
@@ -778,73 +1054,91 @@
static int dst_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
- u8 *val;
int need_cmd;
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
state->voltage = voltage;
- if (state->dst_type == DST_TYPE_IS_TERR)
+ if (state->dst_type != DST_TYPE_IS_SAT)
return 0;
need_cmd = 0;
- val = &state->tx_tuna[0];
- val[8] &= ~0x40;
switch (voltage) {
- case SEC_VOLTAGE_13:
- if ((state->diseq_flags & HAS_POWER) == 0)
+ case SEC_VOLTAGE_13:
+ case SEC_VOLTAGE_18:
+ if ((state->diseq_flags & HAS_POWER) == 0)
+ need_cmd = 1;
+ state->diseq_flags |= HAS_POWER;
+ state->tx_tuna[4] = 0x01;
+ break;
+
+ case SEC_VOLTAGE_OFF:
need_cmd = 1;
- state->diseq_flags |= HAS_POWER;
- break;
- case SEC_VOLTAGE_18:
- if ((state->diseq_flags & HAS_POWER) == 0)
- need_cmd = 1;
- state->diseq_flags |= HAS_POWER;
- val[8] |= 0x40;
- break;
- case SEC_VOLTAGE_OFF:
- need_cmd = 1;
- state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE);
- break;
- default:
- return -EINVAL;
+ state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE);
+ state->tx_tuna[4] = 0x00;
+ break;
+
+ default:
+ return -EINVAL;
}
- if (need_cmd) {
+ if (need_cmd)
dst_tone_power_cmd(state);
- }
+
return 0;
}
static int dst_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
{
- u8 *val;
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
state->tone = tone;
- if (state->dst_type == DST_TYPE_IS_TERR)
+ if (state->dst_type != DST_TYPE_IS_SAT)
return 0;
- val = &state->tx_tuna[0];
-
- val[8] &= ~0x1;
-
switch (tone) {
- case SEC_TONE_OFF:
- break;
- case SEC_TONE_ON:
- val[8] |= 1;
- break;
- default:
- return -EINVAL;
+ case SEC_TONE_OFF:
+ state->tx_tuna[2] = 0xff;
+ break;
+
+ case SEC_TONE_ON:
+ state->tx_tuna[2] = 0x02;
+ break;
+
+ default:
+ return -EINVAL;
}
dst_tone_power_cmd(state);
+
return 0;
}
+static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd)
+{
+ struct dst_state *state = fe->demodulator_priv;
+
+ if (state->dst_type != DST_TYPE_IS_SAT)
+ return 0;
+
+ state->minicmd = minicmd;
+
+ switch (minicmd) {
+ case SEC_MINI_A:
+ state->tx_tuna[3] = 0x02;
+ break;
+ case SEC_MINI_B:
+ state->tx_tuna[3] = 0xff;
+ break;
+ }
+ dst_tone_power_cmd(state);
+
+ return 0;
+}
+
+
static int dst_init(struct dvb_frontend* fe)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
static u8 ini_satci_tuna[] = { 9, 0, 3, 0xb6, 1, 0, 0x73, 0x21, 0, 0 };
static u8 ini_satfta_tuna[] = { 0, 0, 3, 0xb6, 1, 0x55, 0xbd, 0x50, 0, 0 };
static u8 ini_tvfta_tuna[] = { 0, 0, 3, 0xb6, 1, 7, 0x0, 0x0, 0, 0 };
@@ -876,7 +1170,7 @@
static int dst_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
*status = 0;
if (state->diseq_flags & HAS_LOCK) {
@@ -890,7 +1184,7 @@
static int dst_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
dst_get_signal(state);
*strength = state->decode_strength;
@@ -900,7 +1194,7 @@
static int dst_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
dst_get_signal(state);
*snr = state->decode_snr;
@@ -910,13 +1204,19 @@
static int dst_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
dst_set_freq(state, p->frequency);
+ if (verbose > 4)
+ dprintk("Set Frequency = [%d]\n", p->frequency);
+
dst_set_inversion(state, p->inversion);
if (state->dst_type == DST_TYPE_IS_SAT) {
dst_set_fec(state, p->u.qpsk.fec_inner);
dst_set_symbolrate(state, p->u.qpsk.symbol_rate);
+ if (verbose > 4)
+ dprintk("Set Symbolrate = [%d]\n", p->u.qpsk.symbol_rate);
+
} else if (state->dst_type == DST_TYPE_IS_TERR) {
dst_set_bandwidth(state, p->u.ofdm.bandwidth);
} else if (state->dst_type == DST_TYPE_IS_CABLE) {
@@ -930,7 +1230,7 @@
static int dst_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
p->frequency = state->decode_freq;
p->inversion = state->inversion;
@@ -950,7 +1250,7 @@
static void dst_release(struct dvb_frontend* fe)
{
- struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
+ struct dst_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -958,50 +1258,47 @@
static struct dvb_frontend_ops dst_dvbs_ops;
static struct dvb_frontend_ops dst_dvbc_ops;
-struct dvb_frontend* dst_attach(const struct dst_config* config,
- struct i2c_adapter* i2c,
- struct bt878 *bt)
+struct dst_state* dst_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter)
{
- struct dst_state* state = NULL;
- /* allocate memory for the internal state */
- state = (struct dst_state*) kmalloc(sizeof(struct dst_state), GFP_KERNEL);
- if (state == NULL) goto error;
+ /* check if the ASIC is there */
+ if (dst_probe(state) < 0) {
+ if (state)
+ kfree(state);
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- state->bt = bt;
-
- /* check if the demod is there */
- if (dst_check_ci(state) < 0) goto error;
-
+ return NULL;
+ }
/* determine settings based on type */
switch (state->dst_type) {
case DST_TYPE_IS_TERR:
memcpy(&state->ops, &dst_dvbt_ops, sizeof(struct dvb_frontend_ops));
break;
+
case DST_TYPE_IS_CABLE:
memcpy(&state->ops, &dst_dvbc_ops, sizeof(struct dvb_frontend_ops));
break;
+
case DST_TYPE_IS_SAT:
memcpy(&state->ops, &dst_dvbs_ops, sizeof(struct dvb_frontend_ops));
break;
+
default:
- printk("dst: unknown frontend type. please report to the LinuxTV.org DVB mailinglist.\n");
- goto error;
+ printk("%s: unknown DST type. please report to the LinuxTV.org DVB mailinglist.\n", __FUNCTION__);
+ if (state)
+ kfree(state);
+
+ return NULL;
}
/* create dvb_frontend */
state->frontend.ops = &state->ops;
state->frontend.demodulator_priv = state;
- return &state->frontend;
-error:
- kfree(state);
- return NULL;
+ return state; /* Manu (DST is a card not a frontend) */
}
+EXPORT_SYMBOL(dst_attach);
+
static struct dvb_frontend_ops dst_dvbt_ops = {
.info = {
@@ -1051,6 +1348,7 @@
.read_signal_strength = dst_read_signal_strength,
.read_snr = dst_read_snr,
+ .diseqc_send_burst = dst_send_burst,
.diseqc_send_master_cmd = dst_set_diseqc,
.set_voltage = dst_set_voltage,
.set_tone = dst_set_tone,
@@ -1082,8 +1380,7 @@
.read_snr = dst_read_snr,
};
-MODULE_DESCRIPTION("DST DVB-S/T/C Combo Frontend driver");
-MODULE_AUTHOR("Jamie Honan");
-MODULE_LICENSE("GPL");
-EXPORT_SYMBOL(dst_attach);
+MODULE_DESCRIPTION("DST DVB-S/T/C Combo Frontend driver");
+MODULE_AUTHOR("Jamie Honan, Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/bt8xx/dst.h b/drivers/media/dvb/bt8xx/dst.h
deleted file mode 100644
index bcb418c..0000000
--- a/drivers/media/dvb/bt8xx/dst.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- Frontend-driver for TwinHan DST Frontend
-
- Copyright (C) 2003 Jamie Honan
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef DST_H
-#define DST_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/device.h>
-#include "bt878.h"
-
-struct dst_config
-{
- /* the demodulator's i2c address */
- u8 demod_address;
-};
-
-extern struct dvb_frontend* dst_attach(const struct dst_config* config,
- struct i2c_adapter* i2c,
- struct bt878 *bt);
-
-#endif // DST_H
diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c
new file mode 100644
index 0000000..d781504
--- /dev/null
+++ b/drivers/media/dvb/bt8xx/dst_ca.c
@@ -0,0 +1,861 @@
+/*
+ CA-driver for TwinHan DST Frontend/Card
+
+ Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <linux/dvb/ca.h>
+#include "dvbdev.h"
+#include "dvb_frontend.h"
+
+#include "dst_ca.h"
+#include "dst_common.h"
+
+static unsigned int verbose = 1;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+static unsigned int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug messages, default is 1 (yes)");
+
+#define dprintk if (debug) printk
+
+/* Need some more work */
+static int ca_set_slot_descr(void)
+{
+ /* We could make this more graceful ? */
+ return -EOPNOTSUPP;
+}
+
+/* Need some more work */
+static int ca_set_pid(void)
+{
+ /* We could make this more graceful ? */
+ return -EOPNOTSUPP;
+}
+
+
+static int put_checksum(u8 *check_string, int length)
+{
+ u8 i = 0, checksum = 0;
+
+ if (verbose > 3) {
+ dprintk("%s: ========================= Checksum calculation ===========================\n", __FUNCTION__);
+ dprintk("%s: String Length=[0x%02x]\n", __FUNCTION__, length);
+
+ dprintk("%s: String=[", __FUNCTION__);
+ }
+ while (i < length) {
+ if (verbose > 3)
+ dprintk(" %02x", check_string[i]);
+ checksum += check_string[i];
+ i++;
+ }
+ if (verbose > 3) {
+ dprintk(" ]\n");
+ dprintk("%s: Sum=[%02x]\n", __FUNCTION__, checksum);
+ }
+ check_string[length] = ~checksum + 1;
+ if (verbose > 3) {
+ dprintk("%s: Checksum=[%02x]\n", __FUNCTION__, check_string[length]);
+ dprintk("%s: ==========================================================================\n", __FUNCTION__);
+ }
+
+ return 0;
+}
+
+static int dst_ci_command(struct dst_state* state, u8 * data, u8 *ca_string, u8 len, int read)
+{
+ u8 reply;
+
+ dst_comm_init(state);
+ msleep(65);
+
+ if (write_dst(state, data, len)) {
+ dprintk("%s: Write not successful, trying to recover\n", __FUNCTION__);
+ dst_error_recovery(state);
+ return -1;
+ }
+
+ if ((dst_pio_disable(state)) < 0) {
+ dprintk("%s: DST PIO disable failed.\n", __FUNCTION__);
+ return -1;
+ }
+
+ if (read_dst(state, &reply, GET_ACK) < 0) {
+ dprintk("%s: Read not successful, trying to recover\n", __FUNCTION__);
+ dst_error_recovery(state);
+ return -1;
+ }
+
+ if (read) {
+ if (! dst_wait_dst_ready(state, LONG_DELAY)) {
+ dprintk("%s: 8820 not ready\n", __FUNCTION__);
+ return -1;
+ }
+
+ if (read_dst(state, ca_string, 128) < 0) { /* Try to make this dynamic */
+ dprintk("%s: Read not successful, trying to recover\n", __FUNCTION__);
+ dst_error_recovery(state);
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+
+static int dst_put_ci(struct dst_state *state, u8 *data, int len, u8 *ca_string, int read)
+{
+ u8 dst_ca_comm_err = 0;
+
+ while (dst_ca_comm_err < RETRIES) {
+ dst_comm_init(state);
+ if (verbose > 2)
+ dprintk("%s: Put Command\n", __FUNCTION__);
+ if (dst_ci_command(state, data, ca_string, len, read)) { // If error
+ dst_error_recovery(state);
+ dst_ca_comm_err++; // work required here.
+ }
+ break;
+ }
+
+ return 0;
+}
+
+
+
+static int ca_get_app_info(struct dst_state *state)
+{
+ static u8 command[8] = {0x07, 0x40, 0x01, 0x00, 0x01, 0x00, 0x00, 0xff};
+
+ put_checksum(&command[0], command[0]);
+ if ((dst_put_ci(state, command, sizeof(command), state->messages, GET_REPLY)) < 0) {
+ dprintk("%s: -->dst_put_ci FAILED !\n", __FUNCTION__);
+ return -1;
+ }
+ if (verbose > 1) {
+ dprintk("%s: -->dst_put_ci SUCCESS !\n", __FUNCTION__);
+
+ dprintk("%s: ================================ CI Module Application Info ======================================\n", __FUNCTION__);
+ dprintk("%s: Application Type=[%d], Application Vendor=[%d], Vendor Code=[%d]\n%s: Application info=[%s]\n",
+ __FUNCTION__, state->messages[7], (state->messages[8] << 8) | state->messages[9],
+ (state->messages[10] << 8) | state->messages[11], __FUNCTION__, (char *)(&state->messages[12]));
+ dprintk("%s: ==================================================================================================\n", __FUNCTION__);
+ }
+
+ return 0;
+}
+
+static int ca_get_slot_caps(struct dst_state *state, struct ca_caps *p_ca_caps, void *arg)
+{
+ int i;
+ u8 slot_cap[256];
+ static u8 slot_command[8] = {0x07, 0x40, 0x02, 0x00, 0x02, 0x00, 0x00, 0xff};
+
+ put_checksum(&slot_command[0], slot_command[0]);
+ if ((dst_put_ci(state, slot_command, sizeof (slot_command), slot_cap, GET_REPLY)) < 0) {
+ dprintk("%s: -->dst_put_ci FAILED !\n", __FUNCTION__);
+ return -1;
+ }
+ if (verbose > 1)
+ dprintk("%s: -->dst_put_ci SUCCESS !\n", __FUNCTION__);
+
+ /* Will implement the rest soon */
+
+ if (verbose > 1) {
+ dprintk("%s: Slot cap = [%d]\n", __FUNCTION__, slot_cap[7]);
+ dprintk("===================================\n");
+ for (i = 0; i < 8; i++)
+ dprintk(" %d", slot_cap[i]);
+ dprintk("\n");
+ }
+
+ p_ca_caps->slot_num = 1;
+ p_ca_caps->slot_type = 1;
+ p_ca_caps->descr_num = slot_cap[7];
+ p_ca_caps->descr_type = 1;
+
+
+ if (copy_to_user((struct ca_caps *)arg, p_ca_caps, sizeof (struct ca_caps))) {
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+/* Need some more work */
+static int ca_get_slot_descr(struct dst_state *state, struct ca_msg *p_ca_message, void *arg)
+{
+ return -EOPNOTSUPP;
+}
+
+
+static int ca_get_slot_info(struct dst_state *state, struct ca_slot_info *p_ca_slot_info, void *arg)
+{
+ int i;
+ static u8 slot_command[8] = {0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff};
+
+ u8 *slot_info = state->rxbuffer;
+
+ put_checksum(&slot_command[0], 7);
+ if ((dst_put_ci(state, slot_command, sizeof (slot_command), slot_info, GET_REPLY)) < 0) {
+ dprintk("%s: -->dst_put_ci FAILED !\n", __FUNCTION__);
+ return -1;
+ }
+ if (verbose > 1)
+ dprintk("%s: -->dst_put_ci SUCCESS !\n", __FUNCTION__);
+
+ /* Will implement the rest soon */
+
+ if (verbose > 1) {
+ dprintk("%s: Slot info = [%d]\n", __FUNCTION__, slot_info[3]);
+ dprintk("===================================\n");
+ for (i = 0; i < 8; i++)
+ dprintk(" %d", slot_info[i]);
+ dprintk("\n");
+ }
+
+ if (slot_info[4] & 0x80) {
+ p_ca_slot_info->flags = CA_CI_MODULE_PRESENT;
+ p_ca_slot_info->num = 1;
+ p_ca_slot_info->type = CA_CI;
+ }
+ else if (slot_info[4] & 0x40) {
+ p_ca_slot_info->flags = CA_CI_MODULE_READY;
+ p_ca_slot_info->num = 1;
+ p_ca_slot_info->type = CA_CI;
+ }
+ else {
+ p_ca_slot_info->flags = 0;
+ }
+
+ if (copy_to_user((struct ca_slot_info *)arg, p_ca_slot_info, sizeof (struct ca_slot_info))) {
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+
+
+
+static int ca_get_message(struct dst_state *state, struct ca_msg *p_ca_message, void *arg)
+{
+ u8 i = 0;
+ u32 command = 0;
+
+ if (copy_from_user(p_ca_message, (void *)arg, sizeof (struct ca_msg)))
+ return -EFAULT;
+
+
+ if (p_ca_message->msg) {
+ if (verbose > 3)
+ dprintk("Message = [%02x %02x %02x]\n", p_ca_message->msg[0], p_ca_message->msg[1], p_ca_message->msg[2]);
+
+ for (i = 0; i < 3; i++) {
+ command = command | p_ca_message->msg[i];
+ if (i < 2)
+ command = command << 8;
+ }
+ if (verbose > 3)
+ dprintk("%s:Command=[0x%x]\n", __FUNCTION__, command);
+
+ switch (command) {
+ case CA_APP_INFO:
+ memcpy(p_ca_message->msg, state->messages, 128);
+ if (copy_to_user((void *)arg, p_ca_message, sizeof (struct ca_msg)) )
+ return -EFAULT;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int handle_en50221_tag(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer)
+{
+ if (state->dst_hw_cap & DST_TYPE_HAS_SESSION) {
+ hw_buffer->msg[2] = p_ca_message->msg[1]; /* MSB */
+ hw_buffer->msg[3] = p_ca_message->msg[2]; /* LSB */
+ }
+ else {
+ hw_buffer->msg[2] = 0x03;
+ hw_buffer->msg[3] = 0x00;
+ }
+ return 0;
+}
+
+static int debug_8820_buffer(struct ca_msg *hw_buffer)
+{
+ unsigned int i;
+
+ dprintk("%s:Debug=[", __FUNCTION__);
+ for (i = 0; i < (hw_buffer->msg[0] + 1); i++)
+ dprintk(" %02x", hw_buffer->msg[i]);
+ dprintk("]\n");
+
+ return 0;
+}
+
+static int write_to_8820(struct dst_state *state, struct ca_msg *hw_buffer, u8 reply)
+{
+ if ((dst_put_ci(state, hw_buffer->msg, (hw_buffer->length + 1), hw_buffer->msg, reply)) < 0) {
+ dprintk("%s: DST-CI Command failed.\n", __FUNCTION__);
+ dprintk("%s: Resetting DST.\n", __FUNCTION__);
+ rdc_reset_state(state);
+ return -1;
+ }
+ if (verbose > 2)
+ dprintk("%s: DST-CI Command succes.\n", __FUNCTION__);
+
+ return 0;
+}
+
+
+static int ca_set_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer, u8 reply, u8 query)
+{
+ u32 hw_offset, buf_offset, i, k;
+ u32 program_info_length = 0, es_info_length = 0, length = 0, words = 0;
+ u8 found_prog_ca_desc = 0, found_stream_ca_desc = 0, error_condition = 0, hw_buffer_length = 0;
+
+ if (verbose > 3)
+ dprintk("%s, p_ca_message length %d (0x%x)\n", __FUNCTION__,p_ca_message->length,p_ca_message->length );
+
+ handle_en50221_tag(state, p_ca_message, hw_buffer); /* EN50221 tag */
+
+ /* Handle the length field (variable) */
+ if (!(p_ca_message->msg[3] & 0x80)) { /* Length = 1 */
+ length = p_ca_message->msg[3] & 0x7f;
+ words = 0; /* domi's suggestion */
+ }
+ else { /* Length = words */
+ words = p_ca_message->msg[3] & 0x7f;
+ for (i = 0; i < words; i++) {
+ length = length << 8;
+ length = length | p_ca_message->msg[4 + i];
+ }
+ }
+ if (verbose > 4) {
+ dprintk("%s:Length=[%d (0x%x)], Words=[%d]\n", __FUNCTION__, length,length, words);
+
+ /* Debug Input string */
+ for (i = 0; i < length; i++)
+ dprintk(" %02x", p_ca_message->msg[i]);
+ dprintk("]\n");
+ }
+
+ hw_offset = 7;
+ buf_offset = words + 4;
+
+ /* Program Header */
+ if (verbose > 4)
+ dprintk("\n%s:Program Header=[", __FUNCTION__);
+ for (i = 0; i < 6; i++) {
+ hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset];
+ if (verbose > 4)
+ dprintk(" %02x", p_ca_message->msg[buf_offset]);
+ hw_offset++, buf_offset++, hw_buffer_length++;
+ }
+ if (verbose > 4)
+ dprintk("]\n");
+
+ program_info_length = 0;
+ program_info_length = (((program_info_length | p_ca_message->msg[words + 8]) & 0x0f) << 8) | p_ca_message->msg[words + 9];
+ if (verbose > 4)
+ dprintk("%s:Program info Length=[%d][%02x], hw_offset=[%d], buf_offset=[%d] \n",
+ __FUNCTION__, program_info_length, program_info_length, hw_offset, buf_offset);
+
+ if (program_info_length && (program_info_length < 256)) { /* If program_info_length */
+ hw_buffer->msg[11] = hw_buffer->msg[11] & 0x0f; /* req only 4 bits */
+ hw_buffer->msg[12] = hw_buffer->msg[12] + 1; /* increment! ASIC bug! */
+
+ if (p_ca_message->msg[buf_offset + 1] == 0x09) { /* Check CA descriptor */
+ found_prog_ca_desc = 1;
+ if (verbose > 4)
+ dprintk("%s: Found CA descriptor @ Program level\n", __FUNCTION__);
+ }
+
+ if (found_prog_ca_desc) { /* Command only if CA descriptor */
+ hw_buffer->msg[13] = p_ca_message->msg[buf_offset]; /* CA PMT command ID */
+ hw_offset++, buf_offset++, hw_buffer_length++;
+ }
+
+ /* Program descriptors */
+ if (verbose > 4) {
+ dprintk("%s:**********>buf_offset=[%d], hw_offset=[%d]\n", __FUNCTION__, buf_offset, hw_offset);
+ dprintk("%s:Program descriptors=[", __FUNCTION__);
+ }
+ while (program_info_length && !error_condition) { /* Copy prog descriptors */
+ if (program_info_length > p_ca_message->length) { /* Error situation */
+ dprintk ("%s:\"WARNING\" Length error, line=[%d], prog_info_length=[%d]\n",
+ __FUNCTION__, __LINE__, program_info_length);
+ dprintk("%s:\"WARNING\" Bailing out of possible loop\n", __FUNCTION__);
+ error_condition = 1;
+ break;
+ }
+
+ hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset];
+ dprintk(" %02x", p_ca_message->msg[buf_offset]);
+ hw_offset++, buf_offset++, hw_buffer_length++, program_info_length--;
+ }
+ if (verbose > 4) {
+ dprintk("]\n");
+ dprintk("%s:**********>buf_offset=[%d], hw_offset=[%d]\n", __FUNCTION__, buf_offset, hw_offset);
+ }
+ if (found_prog_ca_desc) {
+ if (!reply) {
+ hw_buffer->msg[13] = 0x01; /* OK descrambling */
+ if (verbose > 1)
+ dprintk("CA PMT Command = OK Descrambling\n");
+ }
+ else {
+ hw_buffer->msg[13] = 0x02; /* Ok MMI */
+ if (verbose > 1)
+ dprintk("CA PMT Command = Ok MMI\n");
+ }
+ if (query) {
+ hw_buffer->msg[13] = 0x03; /* Query */
+ if (verbose > 1)
+ dprintk("CA PMT Command = CA PMT query\n");
+ }
+ }
+ }
+ else {
+ hw_buffer->msg[11] = hw_buffer->msg[11] & 0xf0; /* Don't write to ASIC */
+ hw_buffer->msg[12] = hw_buffer->msg[12] = 0x00;
+ }
+ if (verbose > 4)
+ dprintk("%s:**********>p_ca_message->length=[%d], buf_offset=[%d], hw_offset=[%d]\n",
+ __FUNCTION__, p_ca_message->length, buf_offset, hw_offset);
+
+ while ((buf_offset < p_ca_message->length) && !error_condition) {
+ /* Bail out in case of an indefinite loop */
+ if ((es_info_length > p_ca_message->length) || (buf_offset > p_ca_message->length)) {
+ dprintk("%s:\"WARNING\" Length error, line=[%d], prog_info_length=[%d], buf_offset=[%d]\n",
+ __FUNCTION__, __LINE__, program_info_length, buf_offset);
+
+ dprintk("%s:\"WARNING\" Bailing out of possible loop\n", __FUNCTION__);
+ error_condition = 1;
+ break;
+ }
+
+ /* Stream Header */
+
+ for (k = 0; k < 5; k++) {
+ hw_buffer->msg[hw_offset + k] = p_ca_message->msg[buf_offset + k];
+ }
+
+ es_info_length = 0;
+ es_info_length = (es_info_length | (p_ca_message->msg[buf_offset + 3] & 0x0f)) << 8 | p_ca_message->msg[buf_offset + 4];
+
+ if (verbose > 4) {
+ dprintk("\n%s:----->Stream header=[%02x %02x %02x %02x %02x]\n", __FUNCTION__,
+ p_ca_message->msg[buf_offset + 0], p_ca_message->msg[buf_offset + 1],
+ p_ca_message->msg[buf_offset + 2], p_ca_message->msg[buf_offset + 3],
+ p_ca_message->msg[buf_offset + 4]);
+
+ dprintk("%s:----->Stream type=[%02x], es length=[%d (0x%x)], Chars=[%02x] [%02x], buf_offset=[%d]\n", __FUNCTION__,
+ p_ca_message->msg[buf_offset + 0], es_info_length, es_info_length,
+ p_ca_message->msg[buf_offset + 3], p_ca_message->msg[buf_offset + 4], buf_offset);
+ }
+
+ hw_buffer->msg[hw_offset + 3] &= 0x0f; /* req only 4 bits */
+
+ if (found_prog_ca_desc) {
+ hw_buffer->msg[hw_offset + 3] = 0x00;
+ hw_buffer->msg[hw_offset + 4] = 0x00;
+ }
+
+ hw_offset += 5, buf_offset += 5, hw_buffer_length += 5;
+
+ /* Check for CA descriptor */
+ if (p_ca_message->msg[buf_offset + 1] == 0x09) {
+ if (verbose > 4)
+ dprintk("%s:Found CA descriptor @ Stream level\n", __FUNCTION__);
+ found_stream_ca_desc = 1;
+ }
+
+ /* ES descriptors */
+
+ if (es_info_length && !error_condition && !found_prog_ca_desc && found_stream_ca_desc) {
+// if (!ca_pmt_done) {
+ hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset]; /* CA PMT cmd(es) */
+ if (verbose > 4)
+ printk("%s:----->CA PMT Command ID=[%02x]\n", __FUNCTION__, p_ca_message->msg[buf_offset]);
+// hw_offset++, buf_offset++, hw_buffer_length++, es_info_length--, ca_pmt_done = 1;
+ hw_offset++, buf_offset++, hw_buffer_length++, es_info_length--;
+// }
+ if (verbose > 4)
+ dprintk("%s:----->ES descriptors=[", __FUNCTION__);
+
+ while (es_info_length && !error_condition) { /* ES descriptors */
+ if ((es_info_length > p_ca_message->length) || (buf_offset > p_ca_message->length)) {
+ if (verbose > 4) {
+ dprintk("%s:\"WARNING\" ES Length error, line=[%d], es_info_length=[%d], buf_offset=[%d]\n",
+ __FUNCTION__, __LINE__, es_info_length, buf_offset);
+
+ dprintk("%s:\"WARNING\" Bailing out of possible loop\n", __FUNCTION__);
+ }
+ error_condition = 1;
+ break;
+ }
+
+ hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset];
+ if (verbose > 3)
+ dprintk("%02x ", hw_buffer->msg[hw_offset]);
+ hw_offset++, buf_offset++, hw_buffer_length++, es_info_length--;
+ }
+ found_stream_ca_desc = 0; /* unset for new streams */
+ dprintk("]\n");
+ }
+ }
+
+ /* MCU Magic words */
+
+ hw_buffer_length += 7;
+ hw_buffer->msg[0] = hw_buffer_length;
+ hw_buffer->msg[1] = 64;
+ hw_buffer->msg[4] = 3;
+ hw_buffer->msg[5] = hw_buffer->msg[0] - 7;
+ hw_buffer->msg[6] = 0;
+
+
+ /* Fix length */
+ hw_buffer->length = hw_buffer->msg[0];
+
+ put_checksum(&hw_buffer->msg[0], hw_buffer->msg[0]);
+ /* Do the actual write */
+ if (verbose > 4) {
+ dprintk("%s:======================DEBUGGING================================\n", __FUNCTION__);
+ dprintk("%s: Actual Length=[%d]\n", __FUNCTION__, hw_buffer_length);
+ }
+ /* Only for debugging! */
+ if (verbose > 2)
+ debug_8820_buffer(hw_buffer);
+ if (verbose > 3)
+ dprintk("%s: Reply = [%d]\n", __FUNCTION__, reply);
+ write_to_8820(state, hw_buffer, reply);
+
+ return 0;
+}
+
+/* Board supports CA PMT reply ? */
+static int dst_check_ca_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer)
+{
+ int ca_pmt_reply_test = 0;
+
+ /* Do test board */
+ /* Not there yet but soon */
+
+
+ /* CA PMT Reply capable */
+ if (ca_pmt_reply_test) {
+ if ((ca_set_pmt(state, p_ca_message, hw_buffer, 1, GET_REPLY)) < 0) {
+ dprintk("%s: ca_set_pmt.. failed !\n", __FUNCTION__);
+ return -1;
+ }
+
+ /* Process CA PMT Reply */
+ /* will implement soon */
+ dprintk("%s: Not there yet\n", __FUNCTION__);
+ }
+ /* CA PMT Reply not capable */
+ if (!ca_pmt_reply_test) {
+ if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, NO_REPLY)) < 0) {
+ dprintk("%s: ca_set_pmt.. failed !\n", __FUNCTION__);
+ return -1;
+ }
+ if (verbose > 3)
+ dprintk("%s: ca_set_pmt.. success !\n", __FUNCTION__);
+ /* put a dummy message */
+
+ }
+ return 0;
+}
+
+static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, void *arg)
+{
+ int i = 0;
+ unsigned int ca_message_header_len;
+
+ u32 command = 0;
+ struct ca_msg *hw_buffer;
+
+ if ((hw_buffer = (struct ca_msg *) kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) {
+ printk("%s: Memory allocation failure\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+ if (verbose > 3)
+ dprintk("%s\n", __FUNCTION__);
+
+ if (copy_from_user(p_ca_message, (void *)arg, sizeof (struct ca_msg)))
+ return -EFAULT;
+
+ if (p_ca_message->msg) {
+ ca_message_header_len = p_ca_message->length; /* Restore it back when you are done */
+ /* EN50221 tag */
+ command = 0;
+
+ for (i = 0; i < 3; i++) {
+ command = command | p_ca_message->msg[i];
+ if (i < 2)
+ command = command << 8;
+ }
+ if (verbose > 3)
+ dprintk("%s:Command=[0x%x]\n", __FUNCTION__, command);
+
+ switch (command) {
+ case CA_PMT:
+ if (verbose > 3)
+ dprintk("Command = SEND_CA_PMT\n");
+ if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, 0)) < 0) {
+ dprintk("%s: -->CA_PMT Failed !\n", __FUNCTION__);
+ return -1;
+ }
+ if (verbose > 3)
+ dprintk("%s: -->CA_PMT Success !\n", __FUNCTION__);
+// retval = dummy_set_pmt(state, p_ca_message, hw_buffer, 0, 0);
+
+ break;
+
+ case CA_PMT_REPLY:
+ if (verbose > 3)
+ dprintk("Command = CA_PMT_REPLY\n");
+ /* Have to handle the 2 basic types of cards here */
+ if ((dst_check_ca_pmt(state, p_ca_message, hw_buffer)) < 0) {
+ dprintk("%s: -->CA_PMT_REPLY Failed !\n", __FUNCTION__);
+ return -1;
+ }
+ if (verbose > 3)
+ dprintk("%s: -->CA_PMT_REPLY Success !\n", __FUNCTION__);
+
+ /* Certain boards do behave different ? */
+// retval = ca_set_pmt(state, p_ca_message, hw_buffer, 1, 1);
+
+ case CA_APP_INFO_ENQUIRY: // only for debugging
+ if (verbose > 3)
+ dprintk("%s: Getting Cam Application information\n", __FUNCTION__);
+
+ if ((ca_get_app_info(state)) < 0) {
+ dprintk("%s: -->CA_APP_INFO_ENQUIRY Failed !\n", __FUNCTION__);
+ return -1;
+ }
+ if (verbose > 3)
+ printk("%s: -->CA_APP_INFO_ENQUIRY Success !\n", __FUNCTION__);
+
+ break;
+ }
+ }
+ return 0;
+}
+
+static int dst_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg)
+{
+ struct dvb_device* dvbdev = (struct dvb_device*) file->private_data;
+ struct dst_state* state = (struct dst_state*) dvbdev->priv;
+ struct ca_slot_info *p_ca_slot_info;
+ struct ca_caps *p_ca_caps;
+ struct ca_msg *p_ca_message;
+
+ if ((p_ca_message = (struct ca_msg *) kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) {
+ printk("%s: Memory allocation failure\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ if ((p_ca_slot_info = (struct ca_slot_info *) kmalloc(sizeof (struct ca_slot_info), GFP_KERNEL)) == NULL) {
+ printk("%s: Memory allocation failure\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ if ((p_ca_caps = (struct ca_caps *) kmalloc(sizeof (struct ca_caps), GFP_KERNEL)) == NULL) {
+ printk("%s: Memory allocation failure\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ /* We have now only the standard ioctl's, the driver is upposed to handle internals. */
+ switch (cmd) {
+ case CA_SEND_MSG:
+ if (verbose > 1)
+ dprintk("%s: Sending message\n", __FUNCTION__);
+ if ((ca_send_message(state, p_ca_message, arg)) < 0) {
+ dprintk("%s: -->CA_SEND_MSG Failed !\n", __FUNCTION__);
+ return -1;
+ }
+
+ break;
+
+ case CA_GET_MSG:
+ if (verbose > 1)
+ dprintk("%s: Getting message\n", __FUNCTION__);
+ if ((ca_get_message(state, p_ca_message, arg)) < 0) {
+ dprintk("%s: -->CA_GET_MSG Failed !\n", __FUNCTION__);
+ return -1;
+ }
+ if (verbose > 1)
+ dprintk("%s: -->CA_GET_MSG Success !\n", __FUNCTION__);
+
+ break;
+
+ case CA_RESET:
+ if (verbose > 1)
+ dprintk("%s: Resetting DST\n", __FUNCTION__);
+ dst_error_bailout(state);
+ msleep(4000);
+
+ break;
+
+ case CA_GET_SLOT_INFO:
+ if (verbose > 1)
+ dprintk("%s: Getting Slot info\n", __FUNCTION__);
+ if ((ca_get_slot_info(state, p_ca_slot_info, arg)) < 0) {
+ dprintk("%s: -->CA_GET_SLOT_INFO Failed !\n", __FUNCTION__);
+ return -1;
+ }
+ if (verbose > 1)
+ dprintk("%s: -->CA_GET_SLOT_INFO Success !\n", __FUNCTION__);
+
+ break;
+
+ case CA_GET_CAP:
+ if (verbose > 1)
+ dprintk("%s: Getting Slot capabilities\n", __FUNCTION__);
+ if ((ca_get_slot_caps(state, p_ca_caps, arg)) < 0) {
+ dprintk("%s: -->CA_GET_CAP Failed !\n", __FUNCTION__);
+ return -1;
+ }
+ if (verbose > 1)
+ dprintk("%s: -->CA_GET_CAP Success !\n", __FUNCTION__);
+
+ break;
+
+ case CA_GET_DESCR_INFO:
+ if (verbose > 1)
+ dprintk("%s: Getting descrambler description\n", __FUNCTION__);
+ if ((ca_get_slot_descr(state, p_ca_message, arg)) < 0) {
+ dprintk("%s: -->CA_GET_DESCR_INFO Failed !\n", __FUNCTION__);
+ return -1;
+ }
+ if (verbose > 1)
+ dprintk("%s: -->CA_GET_DESCR_INFO Success !\n", __FUNCTION__);
+
+ break;
+
+ case CA_SET_DESCR:
+ if (verbose > 1)
+ dprintk("%s: Setting descrambler\n", __FUNCTION__);
+ if ((ca_set_slot_descr()) < 0) {
+ dprintk("%s: -->CA_SET_DESCR Failed !\n", __FUNCTION__);
+ return -1;
+ }
+ if (verbose > 1)
+ dprintk("%s: -->CA_SET_DESCR Success !\n", __FUNCTION__);
+
+ break;
+
+ case CA_SET_PID:
+ if (verbose > 1)
+ dprintk("%s: Setting PID\n", __FUNCTION__);
+ if ((ca_set_pid()) < 0) {
+ dprintk("%s: -->CA_SET_PID Failed !\n", __FUNCTION__);
+ return -1;
+ }
+ if (verbose > 1)
+ dprintk("%s: -->CA_SET_PID Success !\n", __FUNCTION__);
+
+ default:
+ return -EOPNOTSUPP;
+ };
+
+ return 0;
+}
+
+static int dst_ca_open(struct inode *inode, struct file *file)
+{
+ if (verbose > 4)
+ dprintk("%s:Device opened [%p]\n", __FUNCTION__, file);
+ try_module_get(THIS_MODULE);
+
+ return 0;
+}
+
+static int dst_ca_release(struct inode *inode, struct file *file)
+{
+ if (verbose > 4)
+ dprintk("%s:Device closed.\n", __FUNCTION__);
+ module_put(THIS_MODULE);
+
+ return 0;
+}
+
+static int dst_ca_read(struct file *file, char __user * buffer, size_t length, loff_t * offset)
+{
+ int bytes_read = 0;
+
+ if (verbose > 4)
+ dprintk("%s:Device read.\n", __FUNCTION__);
+
+ return bytes_read;
+}
+
+static int dst_ca_write(struct file *file, const char __user * buffer, size_t length, loff_t * offset)
+{
+ if (verbose > 4)
+ dprintk("%s:Device write.\n", __FUNCTION__);
+
+ return 0;
+}
+
+static struct file_operations dst_ca_fops = {
+ .owner = THIS_MODULE,
+ .ioctl = (void *)dst_ca_ioctl,
+ .open = dst_ca_open,
+ .release = dst_ca_release,
+ .read = dst_ca_read,
+ .write = dst_ca_write
+};
+
+static struct dvb_device dvbdev_ca = {
+ .priv = NULL,
+ .users = 1,
+ .readers = 1,
+ .writers = 1,
+ .fops = &dst_ca_fops
+};
+
+int dst_ca_attach(struct dst_state *dst, struct dvb_adapter *dvb_adapter)
+{
+ struct dvb_device *dvbdev;
+ if (verbose > 4)
+ dprintk("%s:registering DST-CA device\n", __FUNCTION__);
+ dvb_register_device(dvb_adapter, &dvbdev, &dvbdev_ca, dst, DVB_DEVICE_CA);
+ return 0;
+}
+
+EXPORT_SYMBOL(dst_ca_attach);
+
+MODULE_DESCRIPTION("DST DVB-S/T/C Combo CA driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/bt8xx/dst_ca.h b/drivers/media/dvb/bt8xx/dst_ca.h
new file mode 100644
index 0000000..59cd0dd
--- /dev/null
+++ b/drivers/media/dvb/bt8xx/dst_ca.h
@@ -0,0 +1,58 @@
+/*
+ CA-driver for TwinHan DST Frontend/Card
+
+ Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _DST_CA_H_
+#define _DST_CA_H_
+
+#define RETRIES 5
+
+
+#define CA_APP_INFO_ENQUIRY 0x9f8020
+#define CA_APP_INFO 0x9f8021
+#define CA_ENTER_MENU 0x9f8022
+#define CA_INFO_ENQUIRY 0x9f8030
+#define CA_INFO 0x9f8031
+#define CA_PMT 0x9f8032
+#define CA_PMT_REPLY 0x9f8033
+
+#define CA_CLOSE_MMI 0x9f8800
+#define CA_DISPLAY_CONTROL 0x9f8801
+#define CA_DISPLAY_REPLY 0x9f8802
+#define CA_TEXT_LAST 0x9f8803
+#define CA_TEXT_MORE 0x9f8804
+#define CA_KEYPAD_CONTROL 0x9f8805
+#define CA_KEYPRESS 0x9f8806
+
+#define CA_ENQUIRY 0x9f8807
+#define CA_ANSWER 0x9f8808
+#define CA_MENU_LAST 0x9f8809
+#define CA_MENU_MORE 0x9f880a
+#define CA_MENU_ANSWER 0x9f880b
+#define CA_LIST_LAST 0x9f880c
+#define CA_LIST_MORE 0x9f880d
+
+
+struct dst_ca_private {
+ struct dst_state *dst;
+ struct dvb_device *dvbdev;
+};
+
+
+#endif
diff --git a/drivers/media/dvb/bt8xx/dst_common.h b/drivers/media/dvb/bt8xx/dst_common.h
new file mode 100644
index 0000000..0b3da29
--- /dev/null
+++ b/drivers/media/dvb/bt8xx/dst_common.h
@@ -0,0 +1,153 @@
+/*
+ Frontend-driver for TwinHan DST Frontend
+
+ Copyright (C) 2003 Jamie Honan
+ Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef DST_COMMON_H
+#define DST_COMMON_H
+
+#include <linux/dvb/frontend.h>
+#include <linux/device.h>
+#include "bt878.h"
+
+#include "dst_ca.h"
+
+
+#define NO_DELAY 0
+#define LONG_DELAY 1
+#define DEVICE_INIT 2
+
+#define DELAY 1
+
+#define DST_TYPE_IS_SAT 0
+#define DST_TYPE_IS_TERR 1
+#define DST_TYPE_IS_CABLE 2
+#define DST_TYPE_IS_ATSC 3
+
+#define DST_TYPE_HAS_NEWTUNE 1
+#define DST_TYPE_HAS_TS204 2
+#define DST_TYPE_HAS_SYMDIV 4
+#define DST_TYPE_HAS_FW_1 8
+#define DST_TYPE_HAS_FW_2 16
+#define DST_TYPE_HAS_FW_3 32
+#define DST_TYPE_HAS_FW_BUILD 64
+
+/* Card capability list */
+
+#define DST_TYPE_HAS_MAC 1
+#define DST_TYPE_HAS_DISEQC3 2
+#define DST_TYPE_HAS_DISEQC4 4
+#define DST_TYPE_HAS_DISEQC5 8
+#define DST_TYPE_HAS_MOTO 16
+#define DST_TYPE_HAS_CA 32
+#define DST_TYPE_HAS_ANALOG 64 /* Analog inputs */
+#define DST_TYPE_HAS_SESSION 128
+
+
+#define RDC_8820_PIO_0_DISABLE 0
+#define RDC_8820_PIO_0_ENABLE 1
+#define RDC_8820_INT 2
+#define RDC_8820_RESET 4
+
+/* DST Communication */
+#define GET_REPLY 1
+#define NO_REPLY 0
+
+#define GET_ACK 1
+#define FIXED_COMM 8
+
+#define ACK 0xff
+
+struct dst_state {
+
+ struct i2c_adapter* i2c;
+
+ struct bt878* bt;
+
+ struct dvb_frontend_ops ops;
+
+ /* configuration settings */
+ const struct dst_config* config;
+
+ struct dvb_frontend frontend;
+
+ /* private ASIC data */
+ u8 tx_tuna[10];
+ u8 rx_tuna[10];
+ u8 rxbuffer[10];
+ u8 diseq_flags;
+ u8 dst_type;
+ u32 type_flags;
+ u32 frequency; /* intermediate frequency in kHz for QPSK */
+ fe_spectral_inversion_t inversion;
+ u32 symbol_rate; /* symbol rate in Symbols per second */
+ fe_code_rate_t fec;
+ fe_sec_voltage_t voltage;
+ fe_sec_tone_mode_t tone;
+ u32 decode_freq;
+ u8 decode_lock;
+ u16 decode_strength;
+ u16 decode_snr;
+ unsigned long cur_jiff;
+ u8 k22;
+ fe_bandwidth_t bandwidth;
+ u32 dst_hw_cap;
+ u8 dst_fw_version;
+ fe_sec_mini_cmd_t minicmd;
+ u8 messages[256];
+};
+
+struct dst_types {
+ char *device_id;
+ int offset;
+ u8 dst_type;
+ u32 type_flags;
+ u32 dst_feature;
+};
+
+
+
+struct dst_config
+{
+ /* the ASIC i2c address */
+ u8 demod_address;
+};
+
+
+int rdc_reset_state(struct dst_state *state);
+int rdc_8820_reset(struct dst_state *state);
+
+int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode);
+int dst_pio_enable(struct dst_state *state);
+int dst_pio_disable(struct dst_state *state);
+int dst_error_recovery(struct dst_state* state);
+int dst_error_bailout(struct dst_state *state);
+int dst_comm_init(struct dst_state* state);
+
+int write_dst(struct dst_state *state, u8 * data, u8 len);
+int read_dst(struct dst_state *state, u8 * ret, u8 len);
+u8 dst_check_sum(u8 * buf, u32 len);
+struct dst_state* dst_attach(struct dst_state* state, struct dvb_adapter *dvb_adapter);
+int dst_ca_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter);
+int dst_gpio_outb(struct dst_state* state, u32 mask, u32 enbb, u32 outhigh, int delay);
+
+int dst_command(struct dst_state* state, u8 * data, u8 len);
+
+
+#endif // DST_COMMON_H
diff --git a/drivers/media/dvb/bt8xx/dst_priv.h b/drivers/media/dvb/bt8xx/dst_priv.h
index 80488aa..3974a4c 100644
--- a/drivers/media/dvb/bt8xx/dst_priv.h
+++ b/drivers/media/dvb/bt8xx/dst_priv.h
@@ -33,4 +33,3 @@
struct bt878;
int bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp);
-
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index b735397..6f857c6 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -142,7 +142,7 @@
mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
- mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg));
+ mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg));
mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
return 0;
@@ -161,7 +161,7 @@
else if (params->frequency < 771000000) cp = 0xbc;
else cp = 0xf4;
- if (params->frequency == 0) bs = 0x03;
+ if (params->frequency == 0) bs = 0x03;
else if (params->frequency < 443250000) bs = 0x02;
else bs = 0x08;
@@ -190,44 +190,44 @@
u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
- 1576000,1718000,1856000,2036000,2150000};
+ 1576000,1718000,1856000,2036000,2150000};
u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
- 0x00102000,0x00104000,0x00108000,0x00110000,
- 0x00120000,0x00140000};
+ 0x00102000,0x00104000,0x00108000,0x00110000,
+ 0x00120000,0x00140000};
#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
- printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
+ printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
- /* This is really the bit driving the tuner chip cx24108 */
+ /* This is really the bit driving the tuner chip cx24108 */
- if(freq<950000) freq=950000; /* kHz */
- if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */
+ if(freq<950000) freq=950000; /* kHz */
+ if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */
- /* decide which VCO to use for the input frequency */
- for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
- printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
- band=bandsel[i];
- /* the gain values must be set by SetSymbolrate */
- /* compute the pll divider needed, from Conexant data sheet,
- resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
- depending on the divider bit. It is set to /4 on the 2 lowest
- bands */
- n=((i<=2?2:1)*freq*10L)/(XTAL/100);
- a=n%32; n/=32; if(a==0) n--;
- pump=(freq<(osci[i-1]+osci[i])/2);
- pll=0xf8000000|
- ((pump?1:2)<<(14+11))|
- ((n&0x1ff)<<(5+11))|
- ((a&0x1f)<<11);
- /* everything is shifted left 11 bits to left-align the bits in the
- 32bit word. Output to the tuner goes MSB-aligned, after all */
- printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
- cx24110_pll_write(fe,band);
- /* set vga and vca to their widest-band settings, as a precaution.
- SetSymbolrate might not be called to set this up */
- cx24110_pll_write(fe,0x500c0000);
- cx24110_pll_write(fe,0x83f1f800);
- cx24110_pll_write(fe,pll);
+ /* decide which VCO to use for the input frequency */
+ for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
+ printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
+ band=bandsel[i];
+ /* the gain values must be set by SetSymbolrate */
+ /* compute the pll divider needed, from Conexant data sheet,
+ resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
+ depending on the divider bit. It is set to /4 on the 2 lowest
+ bands */
+ n=((i<=2?2:1)*freq*10L)/(XTAL/100);
+ a=n%32; n/=32; if(a==0) n--;
+ pump=(freq<(osci[i-1]+osci[i])/2);
+ pll=0xf8000000|
+ ((pump?1:2)<<(14+11))|
+ ((n&0x1ff)<<(5+11))|
+ ((a&0x1f)<<11);
+ /* everything is shifted left 11 bits to left-align the bits in the
+ 32bit word. Output to the tuner goes MSB-aligned, after all */
+ printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
+ cx24110_pll_write(fe,band);
+ /* set vga and vca to their widest-band settings, as a precaution.
+ SetSymbolrate might not be called to set this up */
+ cx24110_pll_write(fe,0x500c0000);
+ cx24110_pll_write(fe,0x83f1f800);
+ cx24110_pll_write(fe,pll);
/* writereg(client,0x56,0x7f);*/
return 0;
@@ -299,7 +299,7 @@
static u8 mt352_reset [] = { 0x50, 0x80 };
static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
static u8 mt352_agc_cfg [] = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF,
- 0x00, 0xFF, 0x00, 0x40, 0x40 };
+ 0x00, 0xFF, 0x00, 0x40, 0x40 };
static u8 mt352_av771_extra[] = { 0xB5, 0x7A };
static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
@@ -463,6 +463,9 @@
static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
{
+ int ret;
+ struct dst_state* state = NULL;
+
switch(type) {
#ifdef BTTV_DVICO_DVBT_LITE
case BTTV_DVICO_DVBT_LITE:
@@ -503,7 +506,25 @@
break;
case BTTV_TWINHAN_DST:
- card->fe = dst_attach(&dst_config, card->i2c_adapter, card->bt);
+ /* DST is not a frontend driver !!! */
+ state = (struct dst_state *) kmalloc(sizeof (struct dst_state), GFP_KERNEL);
+ /* Setup the Card */
+ state->config = &dst_config;
+ state->i2c = card->i2c_adapter;
+ state->bt = card->bt;
+
+ /* DST is not a frontend, attaching the ASIC */
+ if ((dst_attach(state, &card->dvb_adapter)) == NULL) {
+ printk("%s: Could not find a Twinhan DST.\n", __FUNCTION__);
+ break;
+ }
+ card->fe = &state->frontend;
+
+ /* Attach other DST peripherals if any */
+ /* Conditional Access device */
+ if (state->dst_hw_cap & DST_TYPE_HAS_CA) {
+ ret = dst_ca_attach(state, &card->dvb_adapter);
+ }
if (card->fe != NULL) {
break;
}
@@ -531,7 +552,7 @@
card->bt->dev->subsystem_vendor,
card->bt->dev->subsystem_device);
} else {
- if (dvb_register_frontend(card->dvb_adapter, card->fe)) {
+ if (dvb_register_frontend(&card->dvb_adapter, card->fe)) {
printk("dvb-bt8xx: Frontend registration failed!\n");
if (card->fe->ops->release)
card->fe->ops->release(card->fe);
@@ -550,7 +571,7 @@
return result;
}
- card->dvb_adapter->priv = card;
+ card->dvb_adapter.priv = card;
card->bt->adapter = card->i2c_adapter;
@@ -568,7 +589,7 @@
if ((result = dvb_dmx_init(&card->demux)) < 0) {
printk("dvb_bt8xx: dvb_dmx_init failed (errno = %d)\n", result);
- dvb_unregister_adapter(card->dvb_adapter);
+ dvb_unregister_adapter(&card->dvb_adapter);
return result;
}
@@ -576,11 +597,11 @@
card->dmxdev.demux = &card->demux.dmx;
card->dmxdev.capabilities = 0;
- if ((result = dvb_dmxdev_init(&card->dmxdev, card->dvb_adapter)) < 0) {
+ if ((result = dvb_dmxdev_init(&card->dmxdev, &card->dvb_adapter)) < 0) {
printk("dvb_bt8xx: dvb_dmxdev_init failed (errno = %d)\n", result);
dvb_dmx_release(&card->demux);
- dvb_unregister_adapter(card->dvb_adapter);
+ dvb_unregister_adapter(&card->dvb_adapter);
return result;
}
@@ -591,7 +612,7 @@
dvb_dmxdev_release(&card->dmxdev);
dvb_dmx_release(&card->demux);
- dvb_unregister_adapter(card->dvb_adapter);
+ dvb_unregister_adapter(&card->dvb_adapter);
return result;
}
@@ -603,7 +624,7 @@
card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
dvb_dmxdev_release(&card->dmxdev);
dvb_dmx_release(&card->demux);
- dvb_unregister_adapter(card->dvb_adapter);
+ dvb_unregister_adapter(&card->dvb_adapter);
return result;
}
@@ -614,11 +635,11 @@
card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
dvb_dmxdev_release(&card->dmxdev);
dvb_dmx_release(&card->demux);
- dvb_unregister_adapter(card->dvb_adapter);
+ dvb_unregister_adapter(&card->dvb_adapter);
return result;
}
- dvb_net_init(card->dvb_adapter, &card->dvbnet, &card->demux.dmx);
+ dvb_net_init(&card->dvb_adapter, &card->dvbnet, &card->demux.dmx);
tasklet_init(&card->bt->tasklet, dvb_bt8xx_task, (unsigned long) card);
@@ -648,7 +669,7 @@
case BTTV_PINNACLESAT:
card->gpio_mode = 0x0400c060;
/* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
- BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
+ BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
card->op_sync_orin = 0;
card->irq_err_ignore = 0;
break;
@@ -759,7 +780,7 @@
dvb_dmxdev_release(&card->dmxdev);
dvb_dmx_release(&card->demux);
if (card->fe) dvb_unregister_frontend(card->fe);
- dvb_unregister_adapter(card->dvb_adapter);
+ dvb_unregister_adapter(&card->dvb_adapter);
kfree(card);
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.h b/drivers/media/dvb/bt8xx/dvb-bt8xx.h
index 80ef189..2923b3b 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.h
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.h
@@ -31,7 +31,7 @@
#include "bttv.h"
#include "mt352.h"
#include "sp887x.h"
-#include "dst.h"
+#include "dst_common.h"
#include "nxt6000.h"
#include "cx24110.h"
#include "or51211.h"
@@ -40,7 +40,7 @@
struct semaphore lock;
int nfeeds;
char card_name[32];
- struct dvb_adapter *dvb_adapter;
+ struct dvb_adapter dvb_adapter;
struct bt878 *bt;
unsigned int bttv_nr;
struct dvb_demux demux;
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 28d4d92..96c57fd 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -119,7 +119,7 @@
struct dvb_demux demux;
struct usb_device *udev;
struct semaphore sem;
- struct dvb_adapter *adapter;
+ struct dvb_adapter adapter;
struct dvb_device *fedev;
struct dmxdev dmxdev;
struct dvb_net dvbnet;
@@ -813,15 +813,15 @@
cinergyt2->dmxdev.demux = &cinergyt2->demux.dmx;
cinergyt2->dmxdev.capabilities = 0;
- if ((err = dvb_dmxdev_init(&cinergyt2->dmxdev, cinergyt2->adapter)) < 0) {
+ if ((err = dvb_dmxdev_init(&cinergyt2->dmxdev, &cinergyt2->adapter)) < 0) {
dprintk(1, "dvb_dmxdev_init() failed (err = %d)\n", err);
goto bailout;
}
- if (dvb_net_init(cinergyt2->adapter, &cinergyt2->dvbnet, &cinergyt2->demux.dmx))
+ if (dvb_net_init(&cinergyt2->adapter, &cinergyt2->dvbnet, &cinergyt2->demux.dmx))
dprintk(1, "dvb_net_init() failed!\n");
- dvb_register_device(cinergyt2->adapter, &cinergyt2->fedev,
+ dvb_register_device(&cinergyt2->adapter, &cinergyt2->fedev,
&cinergyt2_fe_template, cinergyt2,
DVB_DEVICE_FRONTEND);
@@ -848,7 +848,7 @@
bailout:
dvb_dmxdev_release(&cinergyt2->dmxdev);
dvb_dmx_release(&cinergyt2->demux);
- dvb_unregister_adapter (cinergyt2->adapter);
+ dvb_unregister_adapter (&cinergyt2->adapter);
cinergyt2_free_stream_urbs (cinergyt2);
kfree(cinergyt2);
return -ENOMEM;
@@ -872,7 +872,7 @@
dvb_dmxdev_release(&cinergyt2->dmxdev);
dvb_dmx_release(&cinergyt2->demux);
dvb_unregister_device(cinergyt2->fedev);
- dvb_unregister_adapter(cinergyt2->adapter);
+ dvb_unregister_adapter(&cinergyt2->adapter);
cinergyt2_free_stream_urbs(cinergyt2);
up(&cinergyt2->sem);
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c b/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c
index 04e54ec..400b439 100644
--- a/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c
@@ -131,7 +131,7 @@
deb_info("dvb_register_adapter failed: error %d", ret);
goto err;
}
- dib->adapter->priv = dib;
+ dib->adapter.priv = dib;
/* i2c is done in dibusb_i2c_init */
@@ -151,18 +151,18 @@
dib->dmxdev.filternum = dib->demux.filternum;
dib->dmxdev.demux = &dib->demux.dmx;
dib->dmxdev.capabilities = 0;
- if ((ret = dvb_dmxdev_init(&dib->dmxdev, dib->adapter)) < 0) {
+ if ((ret = dvb_dmxdev_init(&dib->dmxdev, &dib->adapter)) < 0) {
err("dvb_dmxdev_init failed: error %d",ret);
goto err_dmx_dev;
}
- dvb_net_init(dib->adapter, &dib->dvb_net, &dib->demux.dmx);
+ dvb_net_init(&dib->adapter, &dib->dvb_net, &dib->demux.dmx);
goto success;
err_dmx_dev:
dvb_dmx_release(&dib->demux);
err_dmx:
- dvb_unregister_adapter(dib->adapter);
+ dvb_unregister_adapter(&dib->adapter);
err:
return ret;
success:
@@ -179,7 +179,7 @@
dib->demux.dmx.close(&dib->demux.dmx);
dvb_dmxdev_release(&dib->dmxdev);
dvb_dmx_release(&dib->demux);
- dvb_unregister_adapter(dib->adapter);
+ dvb_unregister_adapter(&dib->adapter);
}
return 0;
}
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c b/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c
index 2ed8948..5a71b88 100644
--- a/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c
@@ -183,7 +183,7 @@
dib->dibdev->name);
return -ENODEV;
} else {
- if (dvb_register_frontend(dib->adapter, dib->fe)) {
+ if (dvb_register_frontend(&dib->adapter, dib->fe)) {
err("Frontend registration failed.");
if (dib->fe->ops->release)
dib->fe->ops->release(dib->fe);
@@ -206,7 +206,7 @@
{
int ret = 0;
- dib->adapter->priv = dib;
+ dib->adapter.priv = dib;
strncpy(dib->i2c_adap.name,dib->dibdev->name,I2C_NAME_SIZE);
#ifdef I2C_ADAP_CLASS_TV_DIGITAL
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb.h b/drivers/media/dvb/dibusb/dvb-dibusb.h
index 52cd35d..c965b64 100644
--- a/drivers/media/dvb/dibusb/dvb-dibusb.h
+++ b/drivers/media/dvb/dibusb/dvb-dibusb.h
@@ -181,7 +181,7 @@
struct semaphore i2c_sem;
/* dvb */
- struct dvb_adapter *adapter;
+ struct dvb_adapter adapter;
struct dmxdev dmxdev;
struct dvb_demux demux;
struct dvb_net dvb_net;
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 1863f1d..c225de7 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -175,8 +175,8 @@
static int dvb_dvr_open(struct inode *inode, struct file *file)
{
- struct dvb_device *dvbdev=(struct dvb_device *) file->private_data;
- struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dmxdev *dmxdev = dvbdev->priv;
struct dmx_frontend *front;
dprintk ("function : %s\n", __FUNCTION__);
@@ -224,8 +224,8 @@
static int dvb_dvr_release(struct inode *inode, struct file *file)
{
- struct dvb_device *dvbdev=(struct dvb_device *) file->private_data;
- struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dmxdev *dmxdev = dvbdev->priv;
if (down_interruptible (&dmxdev->mutex))
return -ERESTARTSYS;
@@ -252,8 +252,8 @@
static ssize_t dvb_dvr_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- struct dvb_device *dvbdev=(struct dvb_device *) file->private_data;
- struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dmxdev *dmxdev = dvbdev->priv;
int ret;
if (!dmxdev->demux->write)
@@ -270,8 +270,8 @@
static ssize_t dvb_dvr_read(struct file *file, char __user *buf, size_t count,
loff_t *ppos)
{
- struct dvb_device *dvbdev=(struct dvb_device *) file->private_data;
- struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dmxdev *dmxdev = dvbdev->priv;
int ret;
//down(&dmxdev->mutex);
@@ -345,7 +345,7 @@
const u8 *buffer2, size_t buffer2_len,
struct dmx_section_filter *filter, enum dmx_success success)
{
- struct dmxdev_filter *dmxdevfilter=(struct dmxdev_filter *) filter->priv;
+ struct dmxdev_filter *dmxdevfilter = filter->priv;
int ret;
if (dmxdevfilter->buffer.error) {
@@ -381,7 +381,7 @@
const u8 *buffer2, size_t buffer2_len,
struct dmx_ts_feed *feed, enum dmx_success success)
{
- struct dmxdev_filter *dmxdevfilter=(struct dmxdev_filter *) feed->priv;
+ struct dmxdev_filter *dmxdevfilter = feed->priv;
struct dmxdev_buffer *buffer;
int ret;
@@ -684,8 +684,8 @@
static int dvb_demux_open(struct inode *inode, struct file *file)
{
- struct dvb_device *dvbdev=(struct dvb_device *) file->private_data;
- struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dmxdev *dmxdev = dvbdev->priv;
int i;
struct dmxdev_filter *dmxdevfilter;
@@ -1013,8 +1013,8 @@
static int dvb_dvr_do_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, void *parg)
{
- struct dvb_device *dvbdev=(struct dvb_device *) file->private_data;
- struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dmxdev *dmxdev = dvbdev->priv;
int ret=0;
@@ -1044,8 +1044,8 @@
static unsigned int dvb_dvr_poll (struct file *file, poll_table *wait)
{
- struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
- struct dmxdev *dmxdev = (struct dmxdev *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dmxdev *dmxdev = dvbdev->priv;
unsigned int mask = 0;
dprintk ("function : %s\n", __FUNCTION__);
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
index c1ea89f..0eb9aa7 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
@@ -829,7 +829,7 @@
*/
void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot, int change_type)
{
- struct dvb_ca_private *ca = (struct dvb_ca_private *) pubca->private;
+ struct dvb_ca_private *ca = pubca->private;
dprintk("CAMCHANGE IRQ slot:%i change_type:%i\n", slot, change_type);
@@ -857,7 +857,7 @@
*/
void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot)
{
- struct dvb_ca_private *ca = (struct dvb_ca_private *) pubca->private;
+ struct dvb_ca_private *ca = pubca->private;
dprintk("CAMREADY IRQ slot:%i\n", slot);
@@ -876,7 +876,7 @@
*/
void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *pubca, int slot)
{
- struct dvb_ca_private *ca = (struct dvb_ca_private *) pubca->private;
+ struct dvb_ca_private *ca = pubca->private;
int flags;
dprintk("FR/DA IRQ slot:%i\n", slot);
@@ -993,7 +993,7 @@
*/
static int dvb_ca_en50221_thread(void *data)
{
- struct dvb_ca_private *ca = (struct dvb_ca_private *) data;
+ struct dvb_ca_private *ca = data;
char name[15];
int slot;
int flags;
@@ -1202,8 +1202,8 @@
static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, void *parg)
{
- struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
- struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dvb_ca_private *ca = dvbdev->priv;
int err = 0;
int slot;
@@ -1225,7 +1225,7 @@
break;
case CA_GET_CAP: {
- struct ca_caps *caps = (struct ca_caps *) parg;
+ struct ca_caps *caps = parg;
caps->slot_num = ca->slot_count;
caps->slot_type = CA_CI_LINK;
@@ -1235,7 +1235,7 @@
}
case CA_GET_SLOT_INFO: {
- struct ca_slot_info *info = (struct ca_slot_info *) parg;
+ struct ca_slot_info *info = parg;
if ((info->num > ca->slot_count) || (info->num < 0))
return -EINVAL;
@@ -1291,8 +1291,8 @@
static ssize_t dvb_ca_en50221_io_write(struct file *file,
const char __user * buf, size_t count, loff_t * ppos)
{
- struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
- struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dvb_ca_private *ca = dvbdev->priv;
u8 slot, connection_id;
int status;
char fragbuf[HOST_LINK_BUF_SIZE];
@@ -1428,8 +1428,8 @@
static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user * buf,
size_t count, loff_t * ppos)
{
- struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
- struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dvb_ca_private *ca = dvbdev->priv;
int status;
int result = 0;
u8 hdr[2];
@@ -1526,8 +1526,8 @@
*/
static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
{
- struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
- struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dvb_ca_private *ca = dvbdev->priv;
int err;
int i;
@@ -1569,8 +1569,8 @@
*/
static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
{
- struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
- struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dvb_ca_private *ca = dvbdev->priv;
int err = 0;
dprintk("%s\n", __FUNCTION__);
@@ -1597,8 +1597,8 @@
*/
static unsigned int dvb_ca_en50221_io_poll(struct file *file, poll_table * wait)
{
- struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
- struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dvb_ca_private *ca = dvbdev->priv;
unsigned int mask = 0;
int slot;
int result = 0;
@@ -1750,7 +1750,7 @@
*/
void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca)
{
- struct dvb_ca_private *ca = (struct dvb_ca_private *) pubca->private;
+ struct dvb_ca_private *ca = pubca->private;
int i;
dprintk("%s\n", __FUNCTION__);
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 59a9adf..d19301d 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -48,7 +48,7 @@
static int dvb_powerdown_on_sleep = 1;
module_param_named(frontend_debug, dvb_frontend_debug, int, 0644);
-MODULE_PARM_DESC(dvb_frontend_debug, "Turn on/off frontend core debugging (default:off).");
+MODULE_PARM_DESC(frontend_debug, "Turn on/off frontend core debugging (default:off).");
module_param(dvb_shutdown_timeout, int, 0444);
MODULE_PARM_DESC(dvb_shutdown_timeout, "wait <shutdown_timeout> seconds after close() before suspending hardware");
module_param(dvb_force_auto_inversion, int, 0444);
@@ -117,7 +117,7 @@
static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status)
{
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
struct dvb_fe_events *events = &fepriv->events;
struct dvb_frontend_event *e;
int wp;
@@ -155,7 +155,7 @@
static int dvb_frontend_get_event(struct dvb_frontend *fe,
struct dvb_frontend_event *event, int flags)
{
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
struct dvb_fe_events *events = &fepriv->events;
dprintk ("%s\n", __FUNCTION__);
@@ -234,7 +234,7 @@
{
int autoinversion;
int ready = 0;
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
int original_inversion = fepriv->parameters.inversion;
u32 original_frequency = fepriv->parameters.frequency;
@@ -321,7 +321,7 @@
static int dvb_frontend_is_exiting(struct dvb_frontend *fe)
{
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
if (fepriv->exit)
return 1;
@@ -335,7 +335,7 @@
static int dvb_frontend_should_wakeup(struct dvb_frontend *fe)
{
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
if (fepriv->wakeup) {
fepriv->wakeup = 0;
@@ -346,7 +346,7 @@
static void dvb_frontend_wakeup(struct dvb_frontend *fe)
{
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
fepriv->wakeup = 1;
wake_up_interruptible(&fepriv->wait_queue);
@@ -357,8 +357,8 @@
*/
static int dvb_frontend_thread(void *data)
{
- struct dvb_frontend *fe = (struct dvb_frontend *) data;
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend *fe = data;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
unsigned long timeout;
char name [15];
int quality = 0, delay = 3*HZ;
@@ -520,7 +520,7 @@
static void dvb_frontend_stop(struct dvb_frontend *fe)
{
unsigned long ret;
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
dprintk ("%s\n", __FUNCTION__);
@@ -559,7 +559,7 @@
static int dvb_frontend_start(struct dvb_frontend *fe)
{
int ret;
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
dprintk ("%s\n", __FUNCTION__);
@@ -597,7 +597,7 @@
{
struct dvb_device *dvbdev = file->private_data;
struct dvb_frontend *fe = dvbdev->priv;
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
int err = -EOPNOTSUPP;
dprintk ("%s\n", __FUNCTION__);
@@ -615,7 +615,7 @@
switch (cmd) {
case FE_GET_INFO: {
- struct dvb_frontend_info* info = (struct dvb_frontend_info*) parg;
+ struct dvb_frontend_info* info = parg;
memcpy(info, &fe->ops->info, sizeof(struct dvb_frontend_info));
/* Force the CAN_INVERSION_AUTO bit on. If the frontend doesn't
@@ -793,7 +793,7 @@
{
struct dvb_device *dvbdev = file->private_data;
struct dvb_frontend *fe = dvbdev->priv;
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
dprintk ("%s\n", __FUNCTION__);
@@ -809,7 +809,7 @@
{
struct dvb_device *dvbdev = file->private_data;
struct dvb_frontend *fe = dvbdev->priv;
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
int ret;
dprintk ("%s\n", __FUNCTION__);
@@ -833,7 +833,7 @@
{
struct dvb_device *dvbdev = file->private_data;
struct dvb_frontend *fe = dvbdev->priv;
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
dprintk ("%s\n", __FUNCTION__);
@@ -873,7 +873,7 @@
up(&frontend_mutex);
return -ENOMEM;
}
- fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ fepriv = fe->frontend_priv;
memset(fe->frontend_priv, 0, sizeof(struct dvb_frontend_private));
init_MUTEX (&fepriv->sem);
@@ -897,7 +897,7 @@
int dvb_unregister_frontend(struct dvb_frontend* fe)
{
- struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
dprintk ("%s\n", __FUNCTION__);
down (&frontend_mutex);
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 44892e7..6a968c3 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -315,7 +315,7 @@
*/
static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
{
- struct dvb_net_priv *priv = (struct dvb_net_priv *)dev->priv;
+ struct dvb_net_priv *priv = dev->priv;
unsigned long skipped = 0L;
u8 *ts, *ts_end, *from_where = NULL, ts_remain = 0, how_much = 0, new_ts = 1;
struct ethhdr *ethh = NULL;
@@ -709,7 +709,7 @@
const u8 *buffer2, size_t buffer2_len,
struct dmx_ts_feed *feed, enum dmx_success success)
{
- struct net_device *dev = (struct net_device *)feed->priv;
+ struct net_device *dev = feed->priv;
if (buffer2 != 0)
printk(KERN_WARNING "buffer2 not 0: %p.\n", buffer2);
@@ -727,6 +727,7 @@
u8 *eth;
struct sk_buff *skb;
struct net_device_stats *stats = &(((struct dvb_net_priv *) dev->priv)->stats);
+ int snap = 0;
/* note: pkt_len includes a 32bit checksum */
if (pkt_len < 16) {
@@ -750,9 +751,12 @@
return;
}
if (pkt[5] & 0x02) {
- //FIXME: handle LLC/SNAP
- stats->rx_dropped++;
- return;
+ /* handle LLC/SNAP, see rfc-1042 */
+ if (pkt_len < 24 || memcmp(&pkt[12], "\xaa\xaa\x03\0\0\0", 6)) {
+ stats->rx_dropped++;
+ return;
+ }
+ snap = 8;
}
if (pkt[7]) {
/* FIXME: assemble datagram from multiple sections */
@@ -762,9 +766,9 @@
}
/* we have 14 byte ethernet header (ip header follows);
- * 12 byte MPE header; 4 byte checksum; + 2 byte alignment
+ * 12 byte MPE header; 4 byte checksum; + 2 byte alignment, 8 byte LLC/SNAP
*/
- if (!(skb = dev_alloc_skb(pkt_len - 4 - 12 + 14 + 2))) {
+ if (!(skb = dev_alloc_skb(pkt_len - 4 - 12 + 14 + 2 - snap))) {
//printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
stats->rx_dropped++;
return;
@@ -773,8 +777,8 @@
skb->dev = dev;
/* copy L3 payload */
- eth = (u8 *) skb_put(skb, pkt_len - 12 - 4 + 14);
- memcpy(eth + 14, pkt + 12, pkt_len - 12 - 4);
+ eth = (u8 *) skb_put(skb, pkt_len - 12 - 4 + 14 - snap);
+ memcpy(eth + 14, pkt + 12 + snap, pkt_len - 12 - 4 - snap);
/* create ethernet header: */
eth[0]=pkt[0x0b];
@@ -786,8 +790,21 @@
eth[6]=eth[7]=eth[8]=eth[9]=eth[10]=eth[11]=0;
- eth[12] = 0x08; /* ETH_P_IP */
- eth[13] = 0x00;
+ if (snap) {
+ eth[12] = pkt[18];
+ eth[13] = pkt[19];
+ } else {
+ /* protocol numbers are from rfc-1700 or
+ * http://www.iana.org/assignments/ethernet-numbers
+ */
+ if (pkt[12] >> 4 == 6) { /* version field from IP header */
+ eth[12] = 0x86; /* IPv6 */
+ eth[13] = 0xdd;
+ } else {
+ eth[12] = 0x08; /* IPv4 */
+ eth[13] = 0x00;
+ }
+ }
skb->protocol = dvb_net_eth_type_trans(skb, dev);
@@ -801,7 +818,7 @@
struct dmx_section_filter *filter,
enum dmx_success success)
{
- struct net_device *dev=(struct net_device *) filter->priv;
+ struct net_device *dev = filter->priv;
/**
* we rely on the DVB API definition where exactly one complete
@@ -826,7 +843,7 @@
struct dmx_section_filter **secfilter,
u8 *mac, u8 *mac_mask)
{
- struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+ struct dvb_net_priv *priv = dev->priv;
int ret;
*secfilter=NULL;
@@ -870,7 +887,7 @@
static int dvb_net_feed_start(struct net_device *dev)
{
int ret, i;
- struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+ struct dvb_net_priv *priv = dev->priv;
struct dmx_demux *demux = priv->demux;
unsigned char *mac = (unsigned char *) dev->dev_addr;
@@ -965,7 +982,7 @@
static int dvb_net_feed_stop(struct net_device *dev)
{
- struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+ struct dvb_net_priv *priv = dev->priv;
int i;
dprintk("%s\n", __FUNCTION__);
@@ -1016,7 +1033,7 @@
static int dvb_set_mc_filter (struct net_device *dev, struct dev_mc_list *mc)
{
- struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+ struct dvb_net_priv *priv = dev->priv;
if (priv->multi_num == DVB_NET_MULTICAST_MAX)
return -ENOMEM;
@@ -1031,7 +1048,7 @@
static void wq_set_multicast_list (void *data)
{
struct net_device *dev = data;
- struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+ struct dvb_net_priv *priv = dev->priv;
dvb_net_feed_stop(dev);
@@ -1066,7 +1083,7 @@
static void dvb_net_set_multicast_list (struct net_device *dev)
{
- struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+ struct dvb_net_priv *priv = dev->priv;
schedule_work(&priv->set_multicast_list_wq);
}
@@ -1084,7 +1101,7 @@
static int dvb_net_set_mac (struct net_device *dev, void *p)
{
- struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+ struct dvb_net_priv *priv = dev->priv;
struct sockaddr *addr=p;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
@@ -1098,7 +1115,7 @@
static int dvb_net_open(struct net_device *dev)
{
- struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+ struct dvb_net_priv *priv = dev->priv;
priv->in_use++;
dvb_net_feed_start(dev);
@@ -1108,7 +1125,7 @@
static int dvb_net_stop(struct net_device *dev)
{
- struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+ struct dvb_net_priv *priv = dev->priv;
priv->in_use--;
return dvb_net_feed_stop(dev);
@@ -1228,8 +1245,8 @@
static int dvb_net_do_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, void *parg)
{
- struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
- struct dvb_net *dvbnet = (struct dvb_net *) dvbdev->priv;
+ struct dvb_device *dvbdev = file->private_data;
+ struct dvb_net *dvbnet = dvbdev->priv;
if (((file->f_flags&O_ACCMODE)==O_RDONLY))
return -EPERM;
@@ -1237,7 +1254,7 @@
switch (cmd) {
case NET_ADD_IF:
{
- struct dvb_net_if *dvbnetif=(struct dvb_net_if *)parg;
+ struct dvb_net_if *dvbnetif = parg;
int result;
if (!capable(CAP_SYS_ADMIN))
@@ -1258,7 +1275,7 @@
{
struct net_device *netdev;
struct dvb_net_priv *priv_data;
- struct dvb_net_if *dvbnetif=(struct dvb_net_if *)parg;
+ struct dvb_net_if *dvbnetif = parg;
if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
!dvbnet->state[dvbnetif->if_num])
@@ -1266,7 +1283,7 @@
netdev = dvbnet->device[dvbnetif->if_num];
- priv_data=(struct dvb_net_priv*)netdev->priv;
+ priv_data = netdev->priv;
dvbnetif->pid=priv_data->pid;
dvbnetif->feedtype=priv_data->feedtype;
break;
@@ -1288,7 +1305,7 @@
/* binary compatiblity cruft */
case __NET_ADD_IF_OLD:
{
- struct __dvb_net_if_old *dvbnetif=(struct __dvb_net_if_old *)parg;
+ struct __dvb_net_if_old *dvbnetif = parg;
int result;
if (!capable(CAP_SYS_ADMIN))
@@ -1309,7 +1326,7 @@
{
struct net_device *netdev;
struct dvb_net_priv *priv_data;
- struct __dvb_net_if_old *dvbnetif=(struct __dvb_net_if_old *)parg;
+ struct __dvb_net_if_old *dvbnetif = parg;
if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
!dvbnet->state[dvbnetif->if_num])
@@ -1317,7 +1334,7 @@
netdev = dvbnet->device[dvbnetif->if_num];
- priv_data=(struct dvb_net_priv*)netdev->priv;
+ priv_data = netdev->priv;
dvbnetif->pid=priv_data->pid;
break;
}
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index cf4ffe3..9d9662f 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -286,9 +286,8 @@
}
-int dvb_register_adapter(struct dvb_adapter **padap, const char *name, struct module *module)
+int dvb_register_adapter(struct dvb_adapter *adap, const char *name, struct module *module)
{
- struct dvb_adapter *adap;
int num;
if (down_interruptible (&dvbdev_register_lock))
@@ -299,11 +298,6 @@
return -ENFILE;
}
- if (!(*padap = adap = kmalloc(sizeof(struct dvb_adapter), GFP_KERNEL))) {
- up(&dvbdev_register_lock);
- return -ENOMEM;
- }
-
memset (adap, 0, sizeof(struct dvb_adapter));
INIT_LIST_HEAD (&adap->device_list);
@@ -331,7 +325,6 @@
return -ERESTARTSYS;
list_del (&adap->list_head);
up (&dvbdev_register_lock);
- kfree (adap);
return 0;
}
EXPORT_SYMBOL(dvb_unregister_adapter);
diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h
index 184edba..a251867 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.h
+++ b/drivers/media/dvb/dvb-core/dvbdev.h
@@ -76,7 +76,7 @@
};
-extern int dvb_register_adapter (struct dvb_adapter **padap, const char *name, struct module *module);
+extern int dvb_register_adapter (struct dvb_adapter *adap, const char *name, struct module *module);
extern int dvb_unregister_adapter (struct dvb_adapter *adap);
extern int dvb_register_device (struct dvb_adapter *adap,
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 0bfd4df..75fb556 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -12,10 +12,10 @@
config DVB_CX24110
tristate "Conexant CX24110 based"
- depends on DVB_CORE
- help
+ depends on DVB_CORE
+ help
A DVB-S tuner module. Say Y when you want to support this frontend.
-
+
config DVB_TDA8083
tristate "Philips TDA8083 based"
depends on DVB_CORE
@@ -127,8 +127,8 @@
config DVB_ATMEL_AT76C651
tristate "Atmel AT76C651 based"
depends on DVB_CORE
- help
- A DVB-C tuner module. Say Y when you want to support this frontend.
+ help
+ A DVB-C tuner module. Say Y when you want to support this frontend.
config DVB_VES1820
tristate "VLSI VES1820 based"
@@ -158,10 +158,6 @@
help
An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
-config DVB_OR51132
- tristate "OR51132 based (pcHDTV)"
- depends on DVB_CORE
-
config DVB_OR51211
tristate "or51211 based (pcHDTV HD2000 card)"
depends on DVB_CORE
@@ -169,4 +165,12 @@
help
An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
+config DVB_OR51132
+ tristate "OR51132 based (pcHDTV HD3000 card)"
+ depends on DVB_CORE
+ select FW_LOADER
+ help
+ An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
+ to support this frontend.
+
endmenu
diff --git a/drivers/media/dvb/frontends/at76c651.c b/drivers/media/dvb/frontends/at76c651.c
index ce2eaa1..72a2b54 100644
--- a/drivers/media/dvb/frontends/at76c651.c
+++ b/drivers/media/dvb/frontends/at76c651.c
@@ -259,7 +259,7 @@
struct dvb_frontend_parameters *p)
{
int ret;
- struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+ struct at76c651_state* state = fe->demodulator_priv;
at76c651_writereg(state, 0x0c, 0xc3);
state->config->pll_set(fe, p);
@@ -276,7 +276,7 @@
static int at76c651_set_defaults(struct dvb_frontend* fe)
{
- struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+ struct at76c651_state* state = fe->demodulator_priv;
at76c651_set_symbol_rate(state, 6900000);
at76c651_set_qam(state, QAM_64);
@@ -294,7 +294,7 @@
static int at76c651_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+ struct at76c651_state* state = fe->demodulator_priv;
u8 sync;
/*
@@ -319,7 +319,7 @@
static int at76c651_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+ struct at76c651_state* state = fe->demodulator_priv;
*ber = (at76c651_readreg(state, 0x81) & 0x0F) << 16;
*ber |= at76c651_readreg(state, 0x82) << 8;
@@ -331,7 +331,7 @@
static int at76c651_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+ struct at76c651_state* state = fe->demodulator_priv;
u8 gain = ~at76c651_readreg(state, 0x91);
*strength = (gain << 8) | gain;
@@ -341,7 +341,7 @@
static int at76c651_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+ struct at76c651_state* state = fe->demodulator_priv;
*snr = 0xFFFF -
((at76c651_readreg(state, 0x8F) << 8) |
@@ -352,7 +352,7 @@
static int at76c651_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+ struct at76c651_state* state = fe->demodulator_priv;
*ucblocks = at76c651_readreg(state, 0x82);
@@ -369,7 +369,7 @@
static void at76c651_release(struct dvb_frontend* fe)
{
- struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+ struct at76c651_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -381,7 +381,7 @@
struct at76c651_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct at76c651_state*) kmalloc(sizeof(struct at76c651_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct at76c651_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c
index a212279..0c2ed44 100644
--- a/drivers/media/dvb/frontends/cx22700.c
+++ b/drivers/media/dvb/frontends/cx22700.c
@@ -232,7 +232,7 @@
static int cx22700_init (struct dvb_frontend* fe)
-{ struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+{ struct cx22700_state* state = fe->demodulator_priv;
int i;
dprintk("cx22700_init: init chip\n");
@@ -258,7 +258,7 @@
static int cx22700_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+ struct cx22700_state* state = fe->demodulator_priv;
u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9)
| (cx22700_readreg (state, 0x0e) << 1);
@@ -286,7 +286,7 @@
static int cx22700_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+ struct cx22700_state* state = fe->demodulator_priv;
*ber = cx22700_readreg (state, 0x0c) & 0x7f;
cx22700_writereg (state, 0x0c, 0x00);
@@ -296,7 +296,7 @@
static int cx22700_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
{
- struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+ struct cx22700_state* state = fe->demodulator_priv;
u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9)
| (cx22700_readreg (state, 0x0e) << 1);
@@ -307,7 +307,7 @@
static int cx22700_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+ struct cx22700_state* state = fe->demodulator_priv;
u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9)
| (cx22700_readreg (state, 0x0e) << 1);
@@ -318,7 +318,7 @@
static int cx22700_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+ struct cx22700_state* state = fe->demodulator_priv;
*ucblocks = cx22700_readreg (state, 0x0f);
cx22700_writereg (state, 0x0f, 0x00);
@@ -328,7 +328,7 @@
static int cx22700_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+ struct cx22700_state* state = fe->demodulator_priv;
cx22700_writereg (state, 0x00, 0x02); /* XXX CHECKME: soft reset*/
cx22700_writereg (state, 0x00, 0x00);
@@ -346,7 +346,7 @@
static int cx22700_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+ struct cx22700_state* state = fe->demodulator_priv;
u8 reg09 = cx22700_readreg (state, 0x09);
p->inversion = reg09 & 0x1 ? INVERSION_ON : INVERSION_OFF;
@@ -363,7 +363,7 @@
static void cx22700_release(struct dvb_frontend* fe)
{
- struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+ struct cx22700_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -375,7 +375,7 @@
struct cx22700_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct cx22700_state*) kmalloc(sizeof(struct cx22700_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct cx22700_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c
index 011860c..f4aa441 100644
--- a/drivers/media/dvb/frontends/cx22702.c
+++ b/drivers/media/dvb/frontends/cx22702.c
@@ -200,7 +200,7 @@
static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
u8 val;
- struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+ struct cx22702_state* state = fe->demodulator_priv;
/* set PLL */
cx22702_writereg (state, 0x0D, cx22702_readreg(state,0x0D) &0xfe);
@@ -338,7 +338,7 @@
static int cx22702_init (struct dvb_frontend* fe)
{
int i;
- struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+ struct cx22702_state* state = fe->demodulator_priv;
cx22702_writereg (state, 0x00, 0x02);
@@ -360,7 +360,7 @@
static int cx22702_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+ struct cx22702_state* state = fe->demodulator_priv;
u8 reg0A;
u8 reg23;
@@ -389,7 +389,7 @@
static int cx22702_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+ struct cx22702_state* state = fe->demodulator_priv;
if(cx22702_readreg (state, 0xE4) & 0x02) {
/* Realtime statistics */
@@ -406,7 +406,7 @@
static int cx22702_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
{
- struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+ struct cx22702_state* state = fe->demodulator_priv;
*signal_strength = cx22702_readreg (state, 0x23);
@@ -415,7 +415,7 @@
static int cx22702_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+ struct cx22702_state* state = fe->demodulator_priv;
u16 rs_ber=0;
if(cx22702_readreg (state, 0xE4) & 0x02) {
@@ -434,7 +434,7 @@
static int cx22702_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+ struct cx22702_state* state = fe->demodulator_priv;
u8 _ucblocks;
@@ -449,7 +449,7 @@
static int cx22702_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+ struct cx22702_state* state = fe->demodulator_priv;
u8 reg0C = cx22702_readreg (state, 0x0C);
@@ -459,7 +459,7 @@
static void cx22702_release(struct dvb_frontend* fe)
{
- struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+ struct cx22702_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -471,7 +471,7 @@
struct cx22702_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct cx22702_state*) kmalloc(sizeof(struct cx22702_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct cx22702_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index ae16112..8222b88 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -315,7 +315,7 @@
int cx24110_pll_write (struct dvb_frontend* fe, u32 data)
{
- struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+ struct cx24110_state *state = fe->demodulator_priv;
/* tuner data is 21 bits long, must be left-aligned in data */
/* tuner cx24108 is written through a dedicated 3wire interface on the demod chip */
@@ -356,7 +356,7 @@
static int cx24110_initfe(struct dvb_frontend* fe)
{
- struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+ struct cx24110_state *state = fe->demodulator_priv;
/* fixme (low): error handling */
int i;
@@ -373,7 +373,7 @@
static int cx24110_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
- struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+ struct cx24110_state *state = fe->demodulator_priv;
switch (voltage) {
case SEC_VOLTAGE_13:
@@ -385,8 +385,7 @@
};
}
-static int cx24110_diseqc_send_burst(struct dvb_frontend* fe,
- fe_sec_mini_cmd_t burst)
+static int cx24110_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
{
int rv, bit, i;
struct cx24110_state *state = fe->demodulator_priv;
@@ -413,7 +412,7 @@
struct dvb_diseqc_master_cmd *cmd)
{
int i, rv;
- struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+ struct cx24110_state *state = fe->demodulator_priv;
for (i = 0; i < cmd->msg_len; i++)
cx24110_writereg(state, 0x79 + i, cmd->msg[i]);
@@ -432,7 +431,7 @@
static int cx24110_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+ struct cx24110_state *state = fe->demodulator_priv;
int sync = cx24110_readreg (state, 0x55);
@@ -460,7 +459,7 @@
static int cx24110_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+ struct cx24110_state *state = fe->demodulator_priv;
/* fixme (maybe): value range is 16 bit. Scale? */
if(cx24110_readreg(state,0x24)&0x10) {
@@ -478,7 +477,7 @@
static int cx24110_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
{
- struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+ struct cx24110_state *state = fe->demodulator_priv;
/* no provision in hardware. Read the frontend AGC accumulator. No idea how to scale this, but I know it is 2s complement */
u8 signal = cx24110_readreg (state, 0x27)+128;
@@ -489,7 +488,7 @@
static int cx24110_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+ struct cx24110_state *state = fe->demodulator_priv;
/* no provision in hardware. Can be computed from the Es/N0 estimator, but I don't know how. */
if(cx24110_readreg(state,0x6a)&0x80) {
@@ -505,7 +504,7 @@
static int cx24110_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+ struct cx24110_state *state = fe->demodulator_priv;
u32 lastbyer;
if(cx24110_readreg(state,0x10)&0x40) {
@@ -527,7 +526,7 @@
static int cx24110_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+ struct cx24110_state *state = fe->demodulator_priv;
state->config->pll_set(fe, p);
cx24110_set_inversion (state, p->inversion);
@@ -540,7 +539,7 @@
static int cx24110_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+ struct cx24110_state *state = fe->demodulator_priv;
s32 afc; unsigned sclk;
/* cannot read back tuner settings (freq). Need to have some private storage */
@@ -567,14 +566,14 @@
static int cx24110_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
{
- struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+ struct cx24110_state *state = fe->demodulator_priv;
return cx24110_writereg(state,0x76,(cx24110_readreg(state,0x76)&~0x10)|(((tone==SEC_TONE_ON))?0x10:0));
}
static void cx24110_release(struct dvb_frontend* fe)
{
- struct cx24110_state* state = (struct cx24110_state*) fe->demodulator_priv;
+ struct cx24110_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -587,7 +586,7 @@
int ret;
/* allocate memory for the internal state */
- state = (struct cx24110_state*) kmalloc(sizeof(struct cx24110_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct cx24110_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c
index a853d12..6f52d64 100644
--- a/drivers/media/dvb/frontends/dib3000mb.c
+++ b/drivers/media/dvb/frontends/dib3000mb.c
@@ -56,12 +56,12 @@
static int dib3000mb_set_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep, int tuner)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm;
fe_code_rate_t fe_cr = FEC_NONE;
int search_state, seq;
- if (tuner) {
+ if (tuner && state->config.pll_addr && state->config.pll_set) {
dib3000mb_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe));
state->config.pll_set(fe, fep, NULL);
dib3000mb_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe));
@@ -317,7 +317,7 @@
static int dib3000mb_fe_init(struct dvb_frontend* fe, int mobile_mode)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
deb_info("dib3000mb is getting up.\n");
wr(DIB3000MB_REG_POWER_CONTROL, DIB3000MB_POWER_UP);
@@ -401,7 +401,7 @@
static int dib3000mb_get_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm;
fe_code_rate_t *cr;
u16 tps_val;
@@ -562,7 +562,7 @@
static int dib3000mb_read_status(struct dvb_frontend* fe, fe_status_t *stat)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
*stat = 0;
@@ -594,7 +594,7 @@
static int dib3000mb_read_ber(struct dvb_frontend* fe, u32 *ber)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
*ber = ((rd(DIB3000MB_REG_BER_MSB) << 16) | rd(DIB3000MB_REG_BER_LSB));
return 0;
@@ -603,7 +603,7 @@
/* see dib3000-watch dvb-apps for exact calcuations of signal_strength and snr */
static int dib3000mb_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
*strength = rd(DIB3000MB_REG_SIGNAL_POWER) * 0xffff / 0x170;
return 0;
@@ -611,7 +611,7 @@
static int dib3000mb_read_snr(struct dvb_frontend* fe, u16 *snr)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
short sigpow = rd(DIB3000MB_REG_SIGNAL_POWER);
int icipow = ((rd(DIB3000MB_REG_NOISE_POWER_MSB) & 0xff) << 16) |
rd(DIB3000MB_REG_NOISE_POWER_LSB);
@@ -621,7 +621,7 @@
static int dib3000mb_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
*unc = rd(DIB3000MB_REG_UNC);
return 0;
@@ -629,7 +629,7 @@
static int dib3000mb_sleep(struct dvb_frontend* fe)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
deb_info("dib3000mb is going to bed.\n");
wr(DIB3000MB_REG_POWER_CONTROL, DIB3000MB_POWER_DOWN);
return 0;
@@ -656,7 +656,7 @@
static void dib3000mb_release(struct dvb_frontend* fe)
{
- struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state *state = fe->demodulator_priv;
kfree(state);
}
@@ -671,7 +671,7 @@
static int dib3000mb_fifo_control(struct dvb_frontend *fe, int onoff)
{
- struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state *state = fe->demodulator_priv;
deb_xfer("%s fifo\n",onoff ? "enabling" : "disabling");
if (onoff) {
@@ -692,7 +692,7 @@
static int dib3000mb_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8 pll_addr)
{
- struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state *state = fe->demodulator_priv;
if (onoff) {
wr(DIB3000MB_REG_TUNER, DIB3000_TUNER_WRITE_ENABLE(pll_addr));
} else {
@@ -709,7 +709,7 @@
struct dib3000_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct dib3000_state*) kmalloc(sizeof(struct dib3000_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct dib3000_state), GFP_KERNEL);
if (state == NULL)
goto error;
memset(state,0,sizeof(struct dib3000_state));
diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb/frontends/dib3000mc.c
index 4a31c05..888f10a 100644
--- a/drivers/media/dvb/frontends/dib3000mc.c
+++ b/drivers/media/dvb/frontends/dib3000mc.c
@@ -297,7 +297,7 @@
static int dib3000mc_get_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm;
fe_code_rate_t *cr;
u16 tps_val,cr_val;
@@ -458,12 +458,12 @@
static int dib3000mc_set_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep, int tuner)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm;
int search_state,auto_val;
u16 val;
- if (tuner) { /* initial call from dvb */
+ if (tuner && state->config.pll_addr && state->config.pll_set) { /* initial call from dvb */
dib3000mc_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe));
state->config.pll_set(fe,fep,NULL);
dib3000mc_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe));
@@ -659,7 +659,7 @@
}
static int dib3000mc_read_status(struct dvb_frontend* fe, fe_status_t *stat)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
u16 lock = rd(DIB3000MC_REG_LOCKING);
*stat = 0;
@@ -679,14 +679,14 @@
static int dib3000mc_read_ber(struct dvb_frontend* fe, u32 *ber)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
*ber = ((rd(DIB3000MC_REG_BER_MSB) << 16) | rd(DIB3000MC_REG_BER_LSB));
return 0;
}
static int dib3000mc_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
*unc = rd(DIB3000MC_REG_PACKET_ERROR_COUNT);
return 0;
@@ -695,7 +695,7 @@
/* see dib3000mb.c for calculation comments */
static int dib3000mc_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
u16 val = rd(DIB3000MC_REG_SIGNAL_NOISE_LSB);
*strength = (((val >> 6) & 0xff) << 8) + (val & 0x3f);
@@ -706,7 +706,7 @@
/* see dib3000mb.c for calculation comments */
static int dib3000mc_read_snr(struct dvb_frontend* fe, u16 *snr)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
u16 val = rd(DIB3000MC_REG_SIGNAL_NOISE_LSB),
val2 = rd(DIB3000MC_REG_SIGNAL_NOISE_MSB);
u16 sig,noise;
@@ -726,7 +726,7 @@
static int dib3000mc_sleep(struct dvb_frontend* fe)
{
- struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state* state = fe->demodulator_priv;
set_or(DIB3000MC_REG_CLK_CFG_7,DIB3000MC_CLK_CFG_7_PWR_DOWN);
wr(DIB3000MC_REG_CLK_CFG_1,DIB3000MC_CLK_CFG_1_POWER_DOWN);
@@ -756,7 +756,7 @@
static void dib3000mc_release(struct dvb_frontend* fe)
{
- struct dib3000_state *state = (struct dib3000_state *) fe->demodulator_priv;
+ struct dib3000_state *state = fe->demodulator_priv;
kfree(state);
}
@@ -771,7 +771,7 @@
static int dib3000mc_fifo_control(struct dvb_frontend *fe, int onoff)
{
- struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state *state = fe->demodulator_priv;
u16 tmp = rd(DIB3000MC_REG_SMO_MODE);
deb_xfer("%s fifo\n",onoff ? "enabling" : "disabling");
@@ -803,7 +803,7 @@
static int dib3000mc_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8 pll_addr)
{
- struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv;
+ struct dib3000_state *state = fe->demodulator_priv;
if (onoff) {
wr(DIB3000MC_REG_TUNER, DIB3000_TUNER_WRITE_ENABLE(pll_addr));
} else {
@@ -844,7 +844,7 @@
u16 devid;
/* allocate memory for the internal state */
- state = (struct dib3000_state*) kmalloc(sizeof(struct dib3000_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct dib3000_state), GFP_KERNEL);
if (state == NULL)
goto error;
memset(state,0,sizeof(struct dib3000_state));
diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h
index 016c794..c4c3c56 100644
--- a/drivers/media/dvb/frontends/dvb-pll.h
+++ b/drivers/media/dvb/frontends/dvb-pll.h
@@ -2,6 +2,9 @@
* $Id: dvb-pll.h,v 1.2 2005/02/10 11:43:41 kraxel Exp $
*/
+#ifndef __DVB_PLL_H__
+#define __DVB_PLL_H__
+
struct dvb_pll_desc {
char *name;
u32 min;
@@ -26,9 +29,4 @@
int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
u32 freq, int bandwidth);
-/*
- * Local variables:
- * c-basic-offset: 8
- * compile-command: "make DVB=1"
- * End:
- */
+#endif
diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.c b/drivers/media/dvb/frontends/dvb_dummy_fe.c
index c05a9b0..cff93b9 100644
--- a/drivers/media/dvb/frontends/dvb_dummy_fe.c
+++ b/drivers/media/dvb/frontends/dvb_dummy_fe.c
@@ -100,7 +100,7 @@
static void dvb_dummy_fe_release(struct dvb_frontend* fe)
{
- struct dvb_dummy_fe_state* state = (struct dvb_dummy_fe_state*) fe->demodulator_priv;
+ struct dvb_dummy_fe_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -111,7 +111,7 @@
struct dvb_dummy_fe_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct dvb_dummy_fe_state*) kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
@@ -134,7 +134,7 @@
struct dvb_dummy_fe_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct dvb_dummy_fe_state*) kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
@@ -157,7 +157,7 @@
struct dvb_dummy_fe_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct dvb_dummy_fe_state*) kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c
index 9ac95de..031a1dd 100644
--- a/drivers/media/dvb/frontends/l64781.c
+++ b/drivers/media/dvb/frontends/l64781.c
@@ -121,7 +121,7 @@
static int apply_frontend_param (struct dvb_frontend* fe, struct dvb_frontend_parameters *param)
{
- struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+ struct l64781_state* state = fe->demodulator_priv;
/* The coderates for FEC_NONE, FEC_4_5 and FEC_FEC_6_7 are arbitrary */
static const u8 fec_tab[] = { 7, 0, 1, 2, 9, 3, 10, 4 };
/* QPSK, QAM_16, QAM_64 */
@@ -234,7 +234,7 @@
static int get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters* param)
{
- struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+ struct l64781_state* state = fe->demodulator_priv;
int tmp;
@@ -352,7 +352,7 @@
static int l64781_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+ struct l64781_state* state = fe->demodulator_priv;
int sync = l64781_readreg (state, 0x32);
int gain = l64781_readreg (state, 0x0e);
@@ -381,7 +381,7 @@
static int l64781_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+ struct l64781_state* state = fe->demodulator_priv;
/* XXX FIXME: set up counting period (reg 0x26...0x28)
*/
@@ -393,7 +393,7 @@
static int l64781_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
{
- struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+ struct l64781_state* state = fe->demodulator_priv;
u8 gain = l64781_readreg (state, 0x0e);
*signal_strength = (gain << 8) | gain;
@@ -403,7 +403,7 @@
static int l64781_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+ struct l64781_state* state = fe->demodulator_priv;
u8 avg_quality = 0xff - l64781_readreg (state, 0x33);
*snr = (avg_quality << 8) | avg_quality; /* not exact, but...*/
@@ -413,7 +413,7 @@
static int l64781_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+ struct l64781_state* state = fe->demodulator_priv;
*ucblocks = l64781_readreg (state, 0x37)
| (l64781_readreg (state, 0x38) << 8);
@@ -423,7 +423,7 @@
static int l64781_sleep(struct dvb_frontend* fe)
{
- struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+ struct l64781_state* state = fe->demodulator_priv;
/* Power down */
return l64781_writereg (state, 0x3e, 0x5a);
@@ -431,7 +431,7 @@
static int l64781_init(struct dvb_frontend* fe)
{
- struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+ struct l64781_state* state = fe->demodulator_priv;
reset_and_configure (state);
@@ -484,7 +484,7 @@
static void l64781_release(struct dvb_frontend* fe)
{
- struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+ struct l64781_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -501,7 +501,7 @@
{ .addr = config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
/* allocate memory for the internal state */
- state = (struct l64781_state*) kmalloc(sizeof(struct l64781_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct l64781_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index 176a22e..e455aec 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -226,7 +226,7 @@
static int mt312_initfe(struct dvb_frontend* fe)
{
- struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 buf[2];
@@ -287,7 +287,7 @@
static int mt312_send_master_cmd(struct dvb_frontend* fe,
struct dvb_diseqc_master_cmd *c)
{
- struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 diseqc_mode;
@@ -318,7 +318,7 @@
static int mt312_send_burst(struct dvb_frontend* fe, const fe_sec_mini_cmd_t c)
{
- struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state *state = fe->demodulator_priv;
const u8 mini_tab[2] = { 0x02, 0x03 };
int ret;
@@ -340,7 +340,7 @@
static int mt312_set_tone(struct dvb_frontend* fe, const fe_sec_tone_mode_t t)
{
- struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state *state = fe->demodulator_priv;
const u8 tone_tab[2] = { 0x01, 0x00 };
int ret;
@@ -362,7 +362,7 @@
static int mt312_set_voltage(struct dvb_frontend* fe, const fe_sec_voltage_t v)
{
- struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state *state = fe->demodulator_priv;
const u8 volt_tab[3] = { 0x00, 0x40, 0x00 };
if (v > SEC_VOLTAGE_OFF)
@@ -373,7 +373,7 @@
static int mt312_read_status(struct dvb_frontend* fe, fe_status_t *s)
{
- struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 status[3];
@@ -400,7 +400,7 @@
static int mt312_read_ber(struct dvb_frontend* fe, u32 *ber)
{
- struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 buf[3];
@@ -414,7 +414,7 @@
static int mt312_read_signal_strength(struct dvb_frontend* fe, u16 *signal_strength)
{
- struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 buf[3];
u16 agc;
@@ -435,7 +435,7 @@
static int mt312_read_snr(struct dvb_frontend* fe, u16 *snr)
{
- struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 buf[2];
@@ -449,7 +449,7 @@
static int mt312_read_ucblocks(struct dvb_frontend* fe, u32 *ubc)
{
- struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 buf[2];
@@ -464,7 +464,7 @@
static int mt312_set_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *p)
{
- struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 buf[5], config_val;
u16 sr;
@@ -560,7 +560,7 @@
static int mt312_get_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *p)
{
- struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state *state = fe->demodulator_priv;
int ret;
if ((ret = mt312_get_inversion(state, &p->inversion)) < 0)
@@ -577,7 +577,7 @@
static int mt312_sleep(struct dvb_frontend* fe)
{
- struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 config;
@@ -605,7 +605,7 @@
static void mt312_release(struct dvb_frontend* fe)
{
- struct mt312_state* state = (struct mt312_state*) fe->demodulator_priv;
+ struct mt312_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -617,7 +617,7 @@
struct mt312_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct mt312_state*) kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
if (state == NULL)
goto error;
@@ -651,7 +651,7 @@
struct mt312_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct mt312_state*) kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
if (state == NULL)
goto error;
diff --git a/drivers/media/dvb/frontends/mt352.c b/drivers/media/dvb/frontends/mt352.c
index 50326c7..d32dc4d 100644
--- a/drivers/media/dvb/frontends/mt352.c
+++ b/drivers/media/dvb/frontends/mt352.c
@@ -46,7 +46,7 @@
struct dvb_frontend_ops ops;
/* configuration settings */
- const struct mt352_config* config;
+ struct mt352_config config;
};
static int debug;
@@ -59,7 +59,7 @@
{
struct mt352_state* state = fe->demodulator_priv;
u8 buf[2] = { reg, val };
- struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0,
+ struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0,
.buf = buf, .len = 2 };
int err = i2c_transfer(state->i2c, &msg, 1);
if (err != 1) {
@@ -84,10 +84,10 @@
int ret;
u8 b0 [] = { reg };
u8 b1 [] = { 0 };
- struct i2c_msg msg [] = { { .addr = state->config->demod_address,
+ struct i2c_msg msg [] = { { .addr = state->config.demod_address,
.flags = 0,
.buf = b0, .len = 1 },
- { .addr = state->config->demod_address,
+ { .addr = state->config.demod_address,
.flags = I2C_M_RD,
.buf = b1, .len = 1 } };
@@ -102,11 +102,6 @@
return b1[0];
}
-int mt352_read(struct dvb_frontend *fe, u8 reg)
-{
- return mt352_read_register(fe->demodulator_priv,reg);
-}
-
static int mt352_sleep(struct dvb_frontend* fe)
{
static u8 mt352_softdown[] = { CLOCK_CTL, 0x20, 0x08 };
@@ -134,8 +129,8 @@
bw = 8;
break;
}
- if (state->config->adc_clock)
- adc_clock = state->config->adc_clock;
+ if (state->config.adc_clock)
+ adc_clock = state->config.adc_clock;
value = 64 * bw * (1<<16) / (7 * 8);
value = value * 1000 / adc_clock;
@@ -152,10 +147,10 @@
int if2 = 36167; /* 36.166667 MHz */
int ife,value;
- if (state->config->adc_clock)
- adc_clock = state->config->adc_clock;
- if (state->config->if2)
- if2 = state->config->if2;
+ if (state->config.adc_clock)
+ adc_clock = state->config.adc_clock;
+ if (state->config.if2)
+ if2 = state->config.if2;
ife = (2*adc_clock - if2);
value = -16374 * ife / adc_clock;
@@ -289,10 +284,10 @@
mt352_calc_nominal_rate(state, op->bandwidth, buf+4);
mt352_calc_input_freq(state, buf+6);
- state->config->pll_set(fe, param, buf+8);
+ state->config.pll_set(fe, param, buf+8);
mt352_write(fe, buf, sizeof(buf));
- if (state->config->no_tuner) {
+ if (state->config.no_tuner) {
/* start decoding */
mt352_write(fe, fsm_go, 2);
} else {
@@ -516,7 +511,7 @@
/* Do a "hard" reset */
mt352_write(fe, mt352_reset_attach, sizeof(mt352_reset_attach));
- return state->config->demod_init(fe);
+ return state->config.demod_init(fe);
}
return 0;
@@ -541,8 +536,8 @@
memset(state,0,sizeof(*state));
/* setup the state */
- state->config = config;
state->i2c = i2c;
+ memcpy(&state->config,config,sizeof(struct mt352_config));
memcpy(&state->ops, &mt352_ops, sizeof(struct dvb_frontend_ops));
/* check if the demod is there */
@@ -601,10 +596,3 @@
EXPORT_SYMBOL(mt352_attach);
EXPORT_SYMBOL(mt352_write);
-EXPORT_SYMBOL(mt352_read);
-/*
- * Local variables:
- * c-basic-offset: 8
- * compile-command: "make DVB=1"
- * End:
- */
diff --git a/drivers/media/dvb/frontends/mt352.h b/drivers/media/dvb/frontends/mt352.h
index f5d8a5a..03040cd 100644
--- a/drivers/media/dvb/frontends/mt352.h
+++ b/drivers/media/dvb/frontends/mt352.h
@@ -61,12 +61,5 @@
struct i2c_adapter* i2c);
extern int mt352_write(struct dvb_frontend* fe, u8* ibuf, int ilen);
-extern int mt352_read(struct dvb_frontend *fe, u8 reg);
#endif // MT352_H
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c
index 4743aa1..35a1d60 100644
--- a/drivers/media/dvb/frontends/nxt2002.c
+++ b/drivers/media/dvb/frontends/nxt2002.c
@@ -241,7 +241,7 @@
static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
{
- struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+ struct nxt2002_state* state = fe->demodulator_priv;
u8 buf[256],written = 0,chunkpos = 0;
u16 rambase,position,crc = 0;
@@ -309,7 +309,7 @@
static int nxt2002_setup_frontend_parameters (struct dvb_frontend* fe,
struct dvb_frontend_parameters *p)
{
- struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+ struct nxt2002_state* state = fe->demodulator_priv;
u32 freq = 0;
u16 tunerfreq = 0;
u8 buf[4];
@@ -343,8 +343,6 @@
/* reset the agc now that tuning has been completed */
nxt2002_agc_reset(state);
-
-
/* set target power level */
switch (p->u.vsb.modulation) {
case QAM_64:
@@ -453,7 +451,7 @@
static int nxt2002_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+ struct nxt2002_state* state = fe->demodulator_priv;
u8 lock;
i2c_readbytes(state,0x31,&lock,1);
@@ -470,7 +468,7 @@
static int nxt2002_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+ struct nxt2002_state* state = fe->demodulator_priv;
u8 b[3];
nxt2002_readreg_multibyte(state,0xE6,b,3);
@@ -482,7 +480,7 @@
static int nxt2002_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+ struct nxt2002_state* state = fe->demodulator_priv;
u8 b[2];
u16 temp = 0;
@@ -502,7 +500,7 @@
static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+ struct nxt2002_state* state = fe->demodulator_priv;
u8 b[2];
u16 temp = 0, temp2;
u32 snrdb = 0;
@@ -536,7 +534,7 @@
static int nxt2002_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+ struct nxt2002_state* state = fe->demodulator_priv;
u8 b[3];
nxt2002_readreg_multibyte(state,0xE6,b,3);
@@ -552,7 +550,7 @@
static int nxt2002_init(struct dvb_frontend* fe)
{
- struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+ struct nxt2002_state* state = fe->demodulator_priv;
const struct firmware *fw;
int ret;
u8 buf[2];
@@ -624,7 +622,7 @@
static void nxt2002_release(struct dvb_frontend* fe)
{
- struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+ struct nxt2002_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -637,7 +635,7 @@
u8 buf [] = {0,0,0,0,0};
/* allocate memory for the internal state */
- state = (struct nxt2002_state*) kmalloc(sizeof(struct nxt2002_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct nxt2002_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c
index a41f7da..966de98 100644
--- a/drivers/media/dvb/frontends/nxt6000.c
+++ b/drivers/media/dvb/frontends/nxt6000.c
@@ -176,11 +176,16 @@
static void nxt6000_setup(struct dvb_frontend* fe)
{
- struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv;
+ struct nxt6000_state* state = fe->demodulator_priv;
nxt6000_writereg(state, RS_COR_SYNC_PARAM, SYNC_PARAM);
nxt6000_writereg(state, BER_CTRL, /*(1 << 2) | */ (0x01 << 1) | 0x01);
- nxt6000_writereg(state, VIT_COR_CTL, VIT_COR_RESYNC);
+ nxt6000_writereg(state, VIT_BERTIME_2, 0x00); // BER Timer = 0x000200 * 256 = 131072 bits
+ nxt6000_writereg(state, VIT_BERTIME_1, 0x02); //
+ nxt6000_writereg(state, VIT_BERTIME_0, 0x00); //
+ nxt6000_writereg(state, VIT_COR_INTEN, 0x98); // Enable BER interrupts
+ nxt6000_writereg(state, VIT_COR_CTL, 0x82); // Enable BER measurement
+ nxt6000_writereg(state, VIT_COR_CTL, VIT_COR_RESYNC | 0x02 );
nxt6000_writereg(state, OFDM_COR_CTL, (0x01 << 5) | (nxt6000_readreg(state, OFDM_COR_CTL) & 0x0F));
nxt6000_writereg(state, OFDM_COR_MODEGUARD, FORCEMODE8K | 0x02);
nxt6000_writereg(state, OFDM_AGC_CTL, AGCLAST | INITIAL_AGC_BW);
@@ -422,7 +427,7 @@
static int nxt6000_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
u8 core_status;
- struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv;
+ struct nxt6000_state* state = fe->demodulator_priv;
*status = 0;
@@ -451,7 +456,7 @@
static int nxt6000_init(struct dvb_frontend* fe)
{
- struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv;
+ struct nxt6000_state* state = fe->demodulator_priv;
nxt6000_reset(state);
nxt6000_setup(fe);
@@ -461,7 +466,7 @@
static int nxt6000_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *param)
{
- struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv;
+ struct nxt6000_state* state = fe->demodulator_priv;
int result;
nxt6000_writereg(state, ENABLE_TUNER_IIC, 0x01); /* open i2c bus switch */
@@ -482,10 +487,44 @@
static void nxt6000_release(struct dvb_frontend* fe)
{
- struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv;
+ struct nxt6000_state* state = fe->demodulator_priv;
kfree(state);
}
+static int nxt6000_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+ struct nxt6000_state* state = fe->demodulator_priv;
+
+ *snr = nxt6000_readreg( state, OFDM_CHC_SNR) / 8;
+
+ return 0;
+}
+
+static int nxt6000_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+ struct nxt6000_state* state = fe->demodulator_priv;
+
+ nxt6000_writereg( state, VIT_COR_INTSTAT, 0x18 );
+
+ *ber = (nxt6000_readreg( state, VIT_BER_1 ) << 8 ) |
+ nxt6000_readreg( state, VIT_BER_0 );
+
+ nxt6000_writereg( state, VIT_COR_INTSTAT, 0x18); // Clear BER Done interrupts
+
+ return 0;
+}
+
+static int nxt6000_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
+{
+ struct nxt6000_state* state = fe->demodulator_priv;
+
+ *signal_strength = (short) (511 -
+ (nxt6000_readreg(state, AGC_GAIN_1) +
+ ((nxt6000_readreg(state, AGC_GAIN_2) & 0x03) << 8)));
+
+ return 0;
+}
+
static struct dvb_frontend_ops nxt6000_ops;
struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config,
@@ -494,7 +533,7 @@
struct nxt6000_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct nxt6000_state*) kmalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
@@ -542,6 +581,9 @@
.set_frontend = nxt6000_set_frontend,
.read_status = nxt6000_read_status,
+ .read_ber = nxt6000_read_ber,
+ .read_signal_strength = nxt6000_read_signal_strength,
+ .read_snr = nxt6000_read_snr,
};
module_param(debug, int, 0644);
diff --git a/drivers/media/dvb/frontends/nxt6000_priv.h b/drivers/media/dvb/frontends/nxt6000_priv.h
index 64b1a89..0422e58 100644
--- a/drivers/media/dvb/frontends/nxt6000_priv.h
+++ b/drivers/media/dvb/frontends/nxt6000_priv.h
@@ -65,12 +65,27 @@
#define BER_DONE (0x08)
#define BER_OVERFLOW (0x10)
+/* 0x38 VIT_BERTIME_2 */
+#define VIT_BERTIME_2 (0x38)
+
+/* 0x39 VIT_BERTIME_1 */
+#define VIT_BERTIME_1 (0x39)
+
+/* 0x3A VIT_BERTIME_0 */
+#define VIT_BERTIME_0 (0x3a)
+
/* 0x38 OFDM_BERTimer *//* Use the alias registers */
#define A_VIT_BER_TIMER_0 (0x1D)
/* 0x3A VIT_BER_TIMER_0 *//* Use the alias registers */
#define A_VIT_BER_0 (0x1B)
+/* 0x3B VIT_BER_1 */
+#define VIT_BER_1 (0x3b)
+
+/* 0x3C VIT_BER_0 */
+#define VIT_BER_0 (0x3c)
+
/* 0x40 OFDM_COR_CTL */
#define OFDM_COR_CTL (0x40)
#define COREACT (0x20)
@@ -117,6 +132,12 @@
#define OFDM_ITB_CTL (0x4B)
#define ITBINV (0x01)
+/* 0x49 AGC_GAIN_1 */
+#define AGC_GAIN_1 (0x49)
+
+/* 0x4A AGC_GAIN_2 */
+#define AGC_GAIN_2 (0x4A)
+
/* 0x4C OFDM_ITB_FREQ_1 */
#define OFDM_ITB_FREQ_1 (0x4C)
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index df5dee7..cc0a77c 100644
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -102,7 +102,7 @@
static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
{
- struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ struct or51132_state* state = fe->demodulator_priv;
static u8 run_buf[] = {0x7F,0x01};
static u8 get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00};
u8 rec_buf[14];
@@ -240,7 +240,7 @@
static int or51132_setmode(struct dvb_frontend* fe)
{
- struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ struct or51132_state* state = fe->demodulator_priv;
unsigned char cmd_buf[4];
dprintk("setmode %d\n",(int)state->current_modulation);
@@ -316,7 +316,7 @@
{
int ret;
u8 buf[4];
- struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ struct or51132_state* state = fe->demodulator_priv;
const struct firmware *fw;
/* Change only if we are actually changing the modulation */
@@ -391,7 +391,7 @@
static int or51132_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ struct or51132_state* state = fe->demodulator_priv;
unsigned char rec_buf[2];
unsigned char snd_buf[2];
*status = 0;
@@ -464,7 +464,7 @@
static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ struct or51132_state* state = fe->demodulator_priv;
unsigned char rec_buf[2];
unsigned char snd_buf[2];
u8 rcvr_stat;
@@ -512,7 +512,7 @@
static int or51132_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ struct or51132_state* state = fe->demodulator_priv;
unsigned char rec_buf[2];
unsigned char snd_buf[2];
u16 snr_equ;
@@ -549,7 +549,7 @@
static void or51132_release(struct dvb_frontend* fe)
{
- struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ struct or51132_state* state = fe->demodulator_priv;
kfree(state);
}
diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c
index 58ad34e..764a95a 100644
--- a/drivers/media/dvb/frontends/sp8870.c
+++ b/drivers/media/dvb/frontends/sp8870.c
@@ -248,7 +248,7 @@
static int sp8870_set_frontend_parameters (struct dvb_frontend* fe,
struct dvb_frontend_parameters *p)
{
- struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+ struct sp8870_state* state = fe->demodulator_priv;
int err;
u16 reg0xc05;
@@ -302,7 +302,7 @@
static int sp8870_init (struct dvb_frontend* fe)
{
- struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+ struct sp8870_state* state = fe->demodulator_priv;
const struct firmware *fw = NULL;
sp8870_wake_up(state);
@@ -358,7 +358,7 @@
static int sp8870_read_status (struct dvb_frontend* fe, fe_status_t * fe_status)
{
- struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+ struct sp8870_state* state = fe->demodulator_priv;
int status;
int signal;
@@ -384,7 +384,7 @@
static int sp8870_read_ber (struct dvb_frontend* fe, u32 * ber)
{
- struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+ struct sp8870_state* state = fe->demodulator_priv;
int ret;
u32 tmp;
@@ -412,7 +412,7 @@
static int sp8870_read_signal_strength(struct dvb_frontend* fe, u16 * signal)
{
- struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+ struct sp8870_state* state = fe->demodulator_priv;
int ret;
u16 tmp;
@@ -438,7 +438,7 @@
static int sp8870_read_uncorrected_blocks (struct dvb_frontend* fe, u32* ublocks)
{
- struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+ struct sp8870_state* state = fe->demodulator_priv;
int ret;
*ublocks = 0;
@@ -467,7 +467,7 @@
static int sp8870_set_frontend (struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+ struct sp8870_state* state = fe->demodulator_priv;
/*
The firmware of the sp8870 sometimes locks up after setting frontend parameters.
@@ -524,7 +524,7 @@
static int sp8870_sleep(struct dvb_frontend* fe)
{
- struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+ struct sp8870_state* state = fe->demodulator_priv;
// tristate TS output and disable interface pins
return sp8870_writereg(state, 0xC18, 0x000);
@@ -540,7 +540,7 @@
static void sp8870_release(struct dvb_frontend* fe)
{
- struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+ struct sp8870_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -552,7 +552,7 @@
struct sp8870_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct sp8870_state*) kmalloc(sizeof(struct sp8870_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct sp8870_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c
index 7eae833..d868a69 100644
--- a/drivers/media/dvb/frontends/sp887x.c
+++ b/drivers/media/dvb/frontends/sp887x.c
@@ -135,7 +135,7 @@
*/
static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware *fw)
{
- struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+ struct sp887x_state* state = fe->demodulator_priv;
u8 buf [BLOCKSIZE+2];
int i;
int fw_size = fw->size;
@@ -344,7 +344,7 @@
static int sp887x_setup_frontend_parameters (struct dvb_frontend* fe,
struct dvb_frontend_parameters *p)
{
- struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+ struct sp887x_state* state = fe->demodulator_priv;
int actual_freq, err;
u16 val, reg0xc05;
@@ -405,7 +405,7 @@
static int sp887x_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+ struct sp887x_state* state = fe->demodulator_priv;
u16 snr12 = sp887x_readreg(state, 0xf16);
u16 sync0x200 = sp887x_readreg(state, 0x200);
u16 sync0xf17 = sp887x_readreg(state, 0xf17);
@@ -439,7 +439,7 @@
static int sp887x_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+ struct sp887x_state* state = fe->demodulator_priv;
*ber = (sp887x_readreg(state, 0xc08) & 0x3f) |
(sp887x_readreg(state, 0xc07) << 6);
@@ -453,7 +453,7 @@
static int sp887x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+ struct sp887x_state* state = fe->demodulator_priv;
u16 snr12 = sp887x_readreg(state, 0xf16);
u32 signal = 3 * (snr12 << 4);
@@ -464,7 +464,7 @@
static int sp887x_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+ struct sp887x_state* state = fe->demodulator_priv;
u16 snr12 = sp887x_readreg(state, 0xf16);
*snr = (snr12 << 4) | (snr12 >> 8);
@@ -474,7 +474,7 @@
static int sp887x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+ struct sp887x_state* state = fe->demodulator_priv;
*ucblocks = sp887x_readreg(state, 0xc0c);
if (*ucblocks == 0xfff)
@@ -485,7 +485,7 @@
static int sp887x_sleep(struct dvb_frontend* fe)
{
- struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+ struct sp887x_state* state = fe->demodulator_priv;
/* tristate TS output and disable interface pins */
sp887x_writereg(state, 0xc18, 0x000);
@@ -495,7 +495,7 @@
static int sp887x_init(struct dvb_frontend* fe)
{
- struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+ struct sp887x_state* state = fe->demodulator_priv;
const struct firmware *fw = NULL;
int ret;
@@ -534,7 +534,7 @@
static void sp887x_release(struct dvb_frontend* fe)
{
- struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+ struct sp887x_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -546,7 +546,7 @@
struct sp887x_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct sp887x_state*) kmalloc(sizeof(struct sp887x_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct sp887x_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
index 502c640..e681263 100644
--- a/drivers/media/dvb/frontends/stv0297.c
+++ b/drivers/media/dvb/frontends/stv0297.c
@@ -365,7 +365,7 @@
int stv0297_enable_plli2c(struct dvb_frontend *fe)
{
- struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+ struct stv0297_state *state = fe->demodulator_priv;
stv0297_writereg(state, 0x87, 0x78);
stv0297_writereg(state, 0x86, 0xc8);
@@ -375,7 +375,7 @@
static int stv0297_init(struct dvb_frontend *fe)
{
- struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+ struct stv0297_state *state = fe->demodulator_priv;
int i;
/* soft reset */
@@ -416,7 +416,7 @@
static int stv0297_sleep(struct dvb_frontend *fe)
{
- struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+ struct stv0297_state *state = fe->demodulator_priv;
stv0297_writereg_mask(state, 0x80, 1, 1);
@@ -425,7 +425,7 @@
static int stv0297_read_status(struct dvb_frontend *fe, fe_status_t * status)
{
- struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+ struct stv0297_state *state = fe->demodulator_priv;
u8 sync = stv0297_readreg(state, 0xDF);
@@ -438,7 +438,7 @@
static int stv0297_read_ber(struct dvb_frontend *fe, u32 * ber)
{
- struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+ struct stv0297_state *state = fe->demodulator_priv;
u8 BER[3];
stv0297_writereg(state, 0xA0, 0x80); // Start Counting bit errors for 4096 Bytes
@@ -453,7 +453,7 @@
static int stv0297_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
{
- struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+ struct stv0297_state *state = fe->demodulator_priv;
u8 STRENGTH[2];
stv0297_readregs(state, 0x41, STRENGTH, 2);
@@ -464,7 +464,7 @@
static int stv0297_read_snr(struct dvb_frontend *fe, u16 * snr)
{
- struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+ struct stv0297_state *state = fe->demodulator_priv;
u8 SNR[2];
stv0297_readregs(state, 0x07, SNR, 2);
@@ -475,7 +475,7 @@
static int stv0297_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks)
{
- struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+ struct stv0297_state *state = fe->demodulator_priv;
*ucblocks = (stv0297_readreg(state, 0xD5) << 8)
| stv0297_readreg(state, 0xD4);
@@ -485,7 +485,7 @@
static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
{
- struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+ struct stv0297_state *state = fe->demodulator_priv;
int u_threshold;
int initial_u;
int blind_u;
@@ -689,7 +689,7 @@
static int stv0297_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
{
- struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+ struct stv0297_state *state = fe->demodulator_priv;
int reg_00, reg_83;
reg_00 = stv0297_readreg(state, 0x00);
@@ -725,7 +725,7 @@
static void stv0297_release(struct dvb_frontend *fe)
{
- struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+ struct stv0297_state *state = fe->demodulator_priv;
kfree(state);
}
@@ -737,7 +737,7 @@
struct stv0297_state *state = NULL;
/* allocate memory for the internal state */
- state = (struct stv0297_state *) kmalloc(sizeof(struct stv0297_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct stv0297_state), GFP_KERNEL);
if (state == NULL)
goto error;
diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c
index 15b4054..cfa3928 100644
--- a/drivers/media/dvb/frontends/stv0299.c
+++ b/drivers/media/dvb/frontends/stv0299.c
@@ -70,6 +70,7 @@
#define STATUS_UCBLOCKS 1
static int debug;
+static int debug_legacy_dish_switch;
#define dprintk(args...) \
do { \
if (debug) printk(KERN_DEBUG "stv0299: " args); \
@@ -93,7 +94,7 @@
int stv0299_writereg (struct dvb_frontend* fe, u8 reg, u8 data)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
return stv0299_writeregI(state, reg, data);
}
@@ -218,7 +219,7 @@
static int stv0299_set_symbolrate (struct dvb_frontend* fe, u32 srate)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u64 big = srate;
u32 ratio;
@@ -269,7 +270,7 @@
static int stv0299_send_diseqc_msg (struct dvb_frontend* fe,
struct dvb_diseqc_master_cmd *m)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 val;
int i;
@@ -299,7 +300,7 @@
static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 val;
dprintk ("%s\n", __FUNCTION__);
@@ -326,7 +327,7 @@
static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 val;
if (stv0299_wait_diseqc_idle (state, 100) < 0)
@@ -348,7 +349,7 @@
static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 reg0x08;
u8 reg0x0c;
@@ -385,34 +386,84 @@
};
}
-static int stv0299_send_legacy_dish_cmd(struct dvb_frontend* fe, u32 cmd)
+static inline s32 stv0299_calc_usec_delay (struct timeval lasttime, struct timeval curtime)
{
+ return ((curtime.tv_usec < lasttime.tv_usec) ?
+ 1000000 - lasttime.tv_usec + curtime.tv_usec :
+ curtime.tv_usec - lasttime.tv_usec);
+}
+
+static void stv0299_sleep_until (struct timeval *waketime, u32 add_usec)
+{
+ struct timeval lasttime;
+ s32 delta, newdelta;
+
+ waketime->tv_usec += add_usec;
+ if (waketime->tv_usec >= 1000000) {
+ waketime->tv_usec -= 1000000;
+ waketime->tv_sec++;
+ }
+
+ do_gettimeofday (&lasttime);
+ delta = stv0299_calc_usec_delay (lasttime, *waketime);
+ if (delta > 2500) {
+ msleep ((delta - 1500) / 1000);
+ do_gettimeofday (&lasttime);
+ newdelta = stv0299_calc_usec_delay (lasttime, *waketime);
+ delta = (newdelta > delta) ? 0 : newdelta;
+ }
+ if (delta > 0)
+ udelay (delta);
+}
+
+static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, u32 cmd)
+{
+ struct stv0299_state* state = fe->demodulator_priv;
+ u8 reg0x08;
+ u8 reg0x0c;
+ u8 lv_mask = 0x40;
u8 last = 1;
int i;
+ struct timeval nexttime;
+ struct timeval tv[10];
- /* reset voltage at the end
- if((0x50 & stv0299_readreg (i2c, 0x0c)) == 0x50)
- cmd |= 0x80;
- else
- cmd &= 0x7F;
- */
+ reg0x08 = stv0299_readreg (state, 0x08);
+ reg0x0c = stv0299_readreg (state, 0x0c);
+ reg0x0c &= 0x0f;
+ stv0299_writeregI (state, 0x08, (reg0x08 & 0x3f) | (state->config->lock_output << 6));
+ if (state->config->volt13_op0_op1 == STV0299_VOLT13_OP0)
+ lv_mask = 0x10;
cmd = cmd << 1;
- dprintk("%s switch command: 0x%04x\n",__FUNCTION__, cmd);
+ if (debug_legacy_dish_switch)
+ printk ("%s switch command: 0x%04x\n",__FUNCTION__, cmd);
- stv0299_set_voltage(fe,SEC_VOLTAGE_18);
- msleep(32);
+ do_gettimeofday (&nexttime);
+ if (debug_legacy_dish_switch)
+ memcpy (&tv[0], &nexttime, sizeof (struct timeval));
+ stv0299_writeregI (state, 0x0c, reg0x0c | 0x50); /* set LNB to 18V */
+
+ stv0299_sleep_until (&nexttime, 32000);
for (i=0; i<9; i++) {
+ if (debug_legacy_dish_switch)
+ do_gettimeofday (&tv[i+1]);
if((cmd & 0x01) != last) {
- stv0299_set_voltage(fe, last ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18);
+ /* set voltage to (last ? 13V : 18V) */
+ stv0299_writeregI (state, 0x0c, reg0x0c | (last ? lv_mask : 0x50));
last = (last) ? 0 : 1;
}
cmd = cmd >> 1;
if (i != 8)
- msleep(8);
+ stv0299_sleep_until (&nexttime, 8000);
+ }
+ if (debug_legacy_dish_switch) {
+ printk ("%s(%d): switch delay (should be 32k followed by all 8k\n",
+ __FUNCTION__, fe->dvb->num);
+ for (i=1; i < 10; i++)
+ printk ("%d: %d\n", i, stv0299_calc_usec_delay (tv[i-1] , tv[i]));
}
return 0;
@@ -420,7 +471,7 @@
static int stv0299_init (struct dvb_frontend* fe)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
int i;
dprintk("stv0299: init chip\n");
@@ -439,7 +490,7 @@
static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 signal = 0xff - stv0299_readreg (state, 0x18);
u8 sync = stv0299_readreg (state, 0x1b);
@@ -467,7 +518,7 @@
static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
if (state->errmode != STATUS_BER) return 0;
*ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
@@ -477,7 +528,7 @@
static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
s32 signal = 0xffff - ((stv0299_readreg (state, 0x18) << 8)
| stv0299_readreg (state, 0x19));
@@ -494,7 +545,7 @@
static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
s32 xsnr = 0xffff - ((stv0299_readreg (state, 0x24) << 8)
| stv0299_readreg (state, 0x25));
@@ -506,7 +557,7 @@
static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0;
else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
@@ -516,7 +567,7 @@
static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
int invval = 0;
dprintk ("%s : FE_SET_FRONTEND\n", __FUNCTION__);
@@ -584,7 +635,7 @@
static int stv0299_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
s32 derot_freq;
int invval;
@@ -609,7 +660,7 @@
static int stv0299_sleep(struct dvb_frontend* fe)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
stv0299_writeregI(state, 0x02, 0x80);
state->initialised = 0;
@@ -619,7 +670,7 @@
static int stv0299_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
fesettings->min_delay_ms = state->config->min_delay_ms;
if (fesettings->parameters.u.qpsk.symbol_rate < 10000000) {
@@ -634,7 +685,7 @@
static void stv0299_release(struct dvb_frontend* fe)
{
- struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -647,7 +698,7 @@
int id;
/* allocate memory for the internal state */
- state = (struct stv0299_state*) kmalloc(sizeof(struct stv0299_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct stv0299_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
@@ -719,6 +770,9 @@
.dishnetwork_send_legacy_command = stv0299_send_legacy_dish_cmd,
};
+module_param(debug_legacy_dish_switch, int, 0444);
+MODULE_PARM_DESC(debug_legacy_dish_switch, "Enable timing analysis for Dish Network legacy switches");
+
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index 4e40d95..87d5f4d 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -205,7 +205,7 @@
static int tda10021_init (struct dvb_frontend *fe)
{
- struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+ struct tda10021_state* state = fe->demodulator_priv;
int i;
dprintk("DVB: TDA10021(%d): init chip\n", fe->adapter->num);
@@ -238,7 +238,7 @@
static int tda10021_set_parameters (struct dvb_frontend *fe,
struct dvb_frontend_parameters *p)
{
- struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+ struct tda10021_state* state = fe->demodulator_priv;
//table for QAM4-QAM256 ready QAM4 QAM16 QAM32 QAM64 QAM128 QAM256
//CONF
@@ -278,7 +278,7 @@
static int tda10021_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+ struct tda10021_state* state = fe->demodulator_priv;
int sync;
*status = 0;
@@ -303,7 +303,7 @@
static int tda10021_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+ struct tda10021_state* state = fe->demodulator_priv;
u32 _ber = tda10021_readreg(state, 0x14) |
(tda10021_readreg(state, 0x15) << 8) |
@@ -315,7 +315,7 @@
static int tda10021_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+ struct tda10021_state* state = fe->demodulator_priv;
u8 gain = tda10021_readreg(state, 0x17);
*strength = (gain << 8) | gain;
@@ -325,7 +325,7 @@
static int tda10021_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+ struct tda10021_state* state = fe->demodulator_priv;
u8 quality = ~tda10021_readreg(state, 0x18);
*snr = (quality << 8) | quality;
@@ -335,7 +335,7 @@
static int tda10021_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+ struct tda10021_state* state = fe->demodulator_priv;
*ucblocks = tda10021_readreg (state, 0x13) & 0x7f;
if (*ucblocks == 0x7f)
@@ -350,7 +350,7 @@
static int tda10021_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+ struct tda10021_state* state = fe->demodulator_priv;
int sync;
s8 afc = 0;
@@ -378,7 +378,7 @@
static int tda10021_sleep(struct dvb_frontend* fe)
{
- struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+ struct tda10021_state* state = fe->demodulator_priv;
tda10021_writereg (state, 0x1b, 0x02); /* pdown ADC */
tda10021_writereg (state, 0x00, 0x80); /* standby */
@@ -388,7 +388,7 @@
static void tda10021_release(struct dvb_frontend* fe)
{
- struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+ struct tda10021_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -401,7 +401,7 @@
struct tda10021_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct tda10021_state*) kmalloc(sizeof(struct tda10021_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct tda10021_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index 687ad9c..0beb370 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -35,9 +35,10 @@
#include "dvb_frontend.h"
#include "tda1004x.h"
-#define TDA1004X_DEMOD_TDA10045 0
-#define TDA1004X_DEMOD_TDA10046 1
-
+enum tda1004x_demod {
+ TDA1004X_DEMOD_TDA10045,
+ TDA1004X_DEMOD_TDA10046,
+};
struct tda1004x_state {
struct i2c_adapter* i2c;
@@ -46,8 +47,9 @@
struct dvb_frontend frontend;
/* private demod data */
- u8 initialised:1;
- u8 demod_type;
+ u8 initialised;
+ enum tda1004x_demod demod_type;
+ u8 fw_version;
};
@@ -139,7 +141,7 @@
{
int ret;
u8 buf[] = { reg, data };
- struct i2c_msg msg = { .addr=0, .flags=0, .buf=buf, .len=2 };
+ struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 };
dprintk("%s: reg=0x%x, data=0x%x\n", __FUNCTION__, reg, data);
@@ -160,8 +162,8 @@
int ret;
u8 b0[] = { reg };
u8 b1[] = { 0 };
- struct i2c_msg msg[] = {{ .addr=0, .flags=0, .buf=b0, .len=1},
- { .addr=0, .flags=I2C_M_RD, .buf=b1, .len = 1}};
+ struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 },
+ { .flags = I2C_M_RD, .buf = b1, .len = 1 }};
dprintk("%s: reg=0x%x\n", __FUNCTION__, reg);
@@ -294,7 +296,7 @@
u8 dspCodeCounterReg, u8 dspCodeInReg)
{
u8 buf[65];
- struct i2c_msg fw_msg = {.addr = 0,.flags = 0,.buf = buf,.len = 0 };
+ struct i2c_msg fw_msg = { .flags = 0, .buf = buf, .len = 0 };
int tx_size;
int pos = 0;
@@ -304,12 +306,10 @@
buf[0] = dspCodeInReg;
while (pos != len) {
-
// work out how much to send this time
tx_size = len - pos;
- if (tx_size > 0x10) {
+ if (tx_size > 0x10)
tx_size = 0x10;
- }
// send the chunk
memcpy(buf + 1, mem + pos, tx_size);
@@ -322,6 +322,7 @@
dprintk("%s: fw_pos=0x%x\n", __FUNCTION__, pos);
}
+
return 0;
}
@@ -335,9 +336,8 @@
data1 = tda1004x_read_byte(state, TDA1004X_DSP_DATA1);
data2 = tda1004x_read_byte(state, TDA1004X_DSP_DATA2);
- if (data1 != 0x67 || data2 != dspVersion) {
+ if ((data1 != 0x67) || (data2 != dspVersion))
return -EIO;
- }
return 0;
}
@@ -348,9 +348,9 @@
int ret;
const struct firmware *fw;
-
/* don't re-upload unless necessary */
- if (tda1004x_check_upload_ok(state, 0x2c) == 0) return 0;
+ if (tda1004x_check_upload_ok(state, 0x2c) == 0)
+ return 0;
/* request the firmware, this will block until someone uploads it */
printk("tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE);
@@ -381,6 +381,25 @@
return tda1004x_check_upload_ok(state, 0x2c);
}
+static int tda10046_get_fw_version(struct tda1004x_state *state,
+ const struct firmware *fw)
+{
+ const unsigned char pattern[] = { 0x67, 0x00, 0x50, 0x62, 0x5e, 0x18, 0x67 };
+ unsigned int i;
+
+ /* area guessed from firmware v20, v21 and v25 */
+ for (i = 0x660; i < 0x700; i++) {
+ if (!memcmp(&fw->data[i], pattern, sizeof(pattern))) {
+ state->fw_version = fw->data[i + sizeof(pattern)];
+ printk(KERN_INFO "tda1004x: using firmware v%02x\n",
+ state->fw_version);
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
static int tda10046_fwupload(struct dvb_frontend* fe)
{
struct tda1004x_state* state = fe->demodulator_priv;
@@ -394,7 +413,8 @@
msleep(100);
/* don't re-upload unless necessary */
- if (tda1004x_check_upload_ok(state, 0x20) == 0) return 0;
+ if (tda1004x_check_upload_ok(state, state->fw_version) == 0)
+ return 0;
/* request the firmware, this will block until someone uploads it */
printk("tda1004x: waiting for firmware upload (%s)...\n", TDA10046_DEFAULT_FIRMWARE);
@@ -404,9 +424,20 @@
return ret;
}
+ if (fw->size < 24478) { /* size of firmware v20, which is the smallest of v20, v21 and v25 */
+ printk("tda1004x: firmware file seems to be too small (%d bytes)\n", fw->size);
+ return -EINVAL;
+ }
+
+ ret = tda10046_get_fw_version(state, fw);
+ if (ret < 0) {
+ printk("tda1004x: unable to find firmware version\n");
+ return ret;
+ }
+
/* set parameters */
tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10);
- tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0);
+ tda1004x_write_byteI(state, TDA10046H_CONFPLL3, state->config->n_i2c);
tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c);
@@ -419,7 +450,7 @@
/* wait for DSP to initialise */
timeout = jiffies + HZ;
- while(!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) {
+ while (!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) {
if (time_after(jiffies, timeout)) {
printk("tda1004x: DSP failed to initialised.\n");
return -EIO;
@@ -427,7 +458,7 @@
msleep(1);
}
- return tda1004x_check_upload_ok(state, 0x20);
+ return tda1004x_check_upload_ok(state, state->fw_version);
}
static int tda1004x_encode_fec(int fec)
@@ -483,7 +514,8 @@
dprintk("%s\n", __FUNCTION__);
- if (state->initialised) return 0;
+ if (state->initialised)
+ return 0;
if (tda10045_fwupload(fe)) {
printk("tda1004x: firmware upload failed\n");
@@ -523,7 +555,8 @@
struct tda1004x_state* state = fe->demodulator_priv;
dprintk("%s\n", __FUNCTION__);
- if (state->initialised) return 0;
+ if (state->initialised)
+ return 0;
if (tda10046_fwupload(fe)) {
printk("tda1004x: firmware upload failed\n");
@@ -545,7 +578,7 @@
tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream
tda1004x_write_mask(state, TDA1004X_CONFC1, 0x80, 0); // disable pulse killer
tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10); // PLL M = 10
- tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0
+ tda1004x_write_byteI(state, TDA10046H_CONFPLL3, state->config->n_i2c); // PLL P = N = 0
tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99); // FREQOFFS = 99
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4); // } PHY2 = -11221
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c); // }
@@ -621,12 +654,14 @@
// set HP FEC
tmp = tda1004x_encode_fec(fe_params->u.ofdm.code_rate_HP);
- if (tmp < 0) return tmp;
+ if (tmp < 0)
+ return tmp;
tda1004x_write_mask(state, TDA1004X_IN_CONF2, 7, tmp);
// set LP FEC
tmp = tda1004x_encode_fec(fe_params->u.ofdm.code_rate_LP);
- if (tmp < 0) return tmp;
+ if (tmp < 0)
+ return tmp;
tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x38, tmp << 3);
// set constellation
@@ -671,7 +706,7 @@
}
// set bandwidth
- switch(state->demod_type) {
+ switch (state->demod_type) {
case TDA1004X_DEMOD_TDA10045:
tda10045h_set_bandwidth(state, fe_params->u.ofdm.bandwidth);
break;
@@ -683,7 +718,8 @@
// set inversion
inversion = fe_params->inversion;
- if (state->config->invert) inversion = inversion ? INVERSION_OFF : INVERSION_ON;
+ if (state->config->invert)
+ inversion = inversion ? INVERSION_OFF : INVERSION_ON;
switch (inversion) {
case INVERSION_OFF:
tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0);
@@ -750,19 +786,19 @@
}
// start the lock
- switch(state->demod_type) {
+ switch (state->demod_type) {
case TDA1004X_DEMOD_TDA10045:
tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);
tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);
- msleep(10);
break;
case TDA1004X_DEMOD_TDA10046:
tda1004x_write_mask(state, TDA1004X_AUTO, 0x40, 0x40);
- msleep(10);
break;
}
+ msleep(10);
+
return 0;
}
@@ -773,13 +809,13 @@
// inversion status
fe_params->inversion = INVERSION_OFF;
- if (tda1004x_read_byte(state, TDA1004X_CONFC1) & 0x20) {
+ if (tda1004x_read_byte(state, TDA1004X_CONFC1) & 0x20)
fe_params->inversion = INVERSION_ON;
- }
- if (state->config->invert) fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON;
+ if (state->config->invert)
+ fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON;
// bandwidth
- switch(state->demod_type) {
+ switch (state->demod_type) {
case TDA1004X_DEMOD_TDA10045:
switch (tda1004x_read_byte(state, TDA10045H_WREF_LSB)) {
case 0x14:
@@ -830,9 +866,8 @@
// transmission mode
fe_params->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K;
- if (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x10) {
+ if (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x10)
fe_params->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K;
- }
// guard interval
switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x0c) >> 2) {
@@ -880,30 +915,33 @@
// read status
status = tda1004x_read_byte(state, TDA1004X_STATUS_CD);
- if (status == -1) {
+ if (status == -1)
return -EIO;
- }
// decode
*fe_status = 0;
- if (status & 4) *fe_status |= FE_HAS_SIGNAL;
- if (status & 2) *fe_status |= FE_HAS_CARRIER;
- if (status & 8) *fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+ if (status & 4)
+ *fe_status |= FE_HAS_SIGNAL;
+ if (status & 2)
+ *fe_status |= FE_HAS_CARRIER;
+ if (status & 8)
+ *fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
// if we don't already have VITERBI (i.e. not LOCKED), see if the viterbi
// is getting anything valid
if (!(*fe_status & FE_HAS_VITERBI)) {
// read the CBER
cber = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
- if (cber == -1) return -EIO;
+ if (cber == -1)
+ return -EIO;
status = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
- if (status == -1) return -EIO;
+ if (status == -1)
+ return -EIO;
cber |= (status << 8);
tda1004x_read_byte(state, TDA1004X_CBER_RESET);
- if (cber != 65535) {
+ if (cber != 65535)
*fe_status |= FE_HAS_VITERBI;
- }
}
// if we DO have some valid VITERBI output, but don't already have SYNC
@@ -911,20 +949,22 @@
if ((*fe_status & FE_HAS_VITERBI) && (!(*fe_status & FE_HAS_SYNC))) {
// read the VBER
vber = tda1004x_read_byte(state, TDA1004X_VBER_LSB);
- if (vber == -1) return -EIO;
+ if (vber == -1)
+ return -EIO;
status = tda1004x_read_byte(state, TDA1004X_VBER_MID);
- if (status == -1) return -EIO;
+ if (status == -1)
+ return -EIO;
vber |= (status << 8);
status = tda1004x_read_byte(state, TDA1004X_VBER_MSB);
- if (status == -1) return -EIO;
+ if (status == -1)
+ return -EIO;
vber |= ((status << 16) & 0x0f);
tda1004x_read_byte(state, TDA1004X_CVBER_LUT);
// if RS has passed some valid TS packets, then we must be
// getting some SYNC bytes
- if (vber < 16632) {
+ if (vber < 16632)
*fe_status |= FE_HAS_SYNC;
- }
}
// success
@@ -941,7 +981,7 @@
dprintk("%s\n", __FUNCTION__);
// determine the register to use
- switch(state->demod_type) {
+ switch (state->demod_type) {
case TDA1004X_DEMOD_TDA10045:
reg = TDA10045H_S_AGC;
break;
@@ -972,9 +1012,8 @@
tmp = tda1004x_read_byte(state, TDA1004X_SNR);
if (tmp < 0)
return -EIO;
- if (tmp) {
+ if (tmp)
tmp = 255 - tmp;
- }
*snr = ((tmp << 8) | tmp);
dprintk("%s: snr=0x%x\n", __FUNCTION__, *snr);
@@ -1009,11 +1048,11 @@
break;
}
- if (tmp != 0x7f) {
+ if (tmp != 0x7f)
*ucblocks = tmp;
- } else {
+ else
*ucblocks = 0xffffffff;
- }
+
dprintk("%s: ucblocks=0x%x\n", __FUNCTION__, *ucblocks);
return 0;
}
@@ -1027,10 +1066,12 @@
// read it in
tmp = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
- if (tmp < 0) return -EIO;
+ if (tmp < 0)
+ return -EIO;
*ber = tmp << 1;
tmp = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
- if (tmp < 0) return -EIO;
+ if (tmp < 0)
+ return -EIO;
*ber |= (tmp << 9);
tda1004x_read_byte(state, TDA1004X_CBER_RESET);
@@ -1042,7 +1083,7 @@
{
struct tda1004x_state* state = fe->demodulator_priv;
- switch(state->demod_type) {
+ switch (state->demod_type) {
case TDA1004X_DEMOD_TDA10045:
tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0x10);
break;
@@ -1066,74 +1107,11 @@
static void tda1004x_release(struct dvb_frontend* fe)
{
- struct tda1004x_state* state = (struct tda1004x_state*) fe->demodulator_priv;
+ struct tda1004x_state *state = fe->demodulator_priv;
kfree(state);
}
-static struct dvb_frontend_ops tda10045_ops;
-
-struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
- struct i2c_adapter* i2c)
-{
- struct tda1004x_state* state = NULL;
-
- /* allocate memory for the internal state */
- state = (struct tda1004x_state*) kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
- if (state == NULL) goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- memcpy(&state->ops, &tda10045_ops, sizeof(struct dvb_frontend_ops));
- state->initialised = 0;
- state->demod_type = TDA1004X_DEMOD_TDA10045;
-
- /* check if the demod is there */
- if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) goto error;
-
- /* create dvb_frontend */
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
-static struct dvb_frontend_ops tda10046_ops;
-
-struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
- struct i2c_adapter* i2c)
-{
- struct tda1004x_state* state = NULL;
-
- /* allocate memory for the internal state */
- state = (struct tda1004x_state*) kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
- if (state == NULL) goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- memcpy(&state->ops, &tda10046_ops, sizeof(struct dvb_frontend_ops));
- state->initialised = 0;
- state->demod_type = TDA1004X_DEMOD_TDA10046;
-
- /* check if the demod is there */
- if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) goto error;
-
- /* create dvb_frontend */
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- if (state) kfree(state);
- return NULL;
-}
-
static struct dvb_frontend_ops tda10045_ops = {
-
.info = {
.name = "Philips TDA10045H DVB-T",
.type = FE_OFDM,
@@ -1163,8 +1141,36 @@
.read_ucblocks = tda1004x_read_ucblocks,
};
-static struct dvb_frontend_ops tda10046_ops = {
+struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct tda1004x_state *state;
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+ if (!state)
+ return NULL;
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ memcpy(&state->ops, &tda10045_ops, sizeof(struct dvb_frontend_ops));
+ state->initialised = 0;
+ state->demod_type = TDA1004X_DEMOD_TDA10045;
+
+ /* check if the demod is there */
+ if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) {
+ kfree(state);
+ return NULL;
+ }
+
+ /* create dvb_frontend */
+ state->frontend.ops = &state->ops;
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+}
+
+static struct dvb_frontend_ops tda10046_ops = {
.info = {
.name = "Philips TDA10046H DVB-T",
.type = FE_OFDM,
@@ -1194,6 +1200,36 @@
.read_ucblocks = tda1004x_read_ucblocks,
};
+struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct tda1004x_state *state;
+
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+ if (!state)
+ return NULL;
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ memcpy(&state->ops, &tda10046_ops, sizeof(struct dvb_frontend_ops));
+ state->initialised = 0;
+ state->demod_type = TDA1004X_DEMOD_TDA10046;
+ state->fw_version = 0x20; /* dummy default value */
+
+ /* check if the demod is there */
+ if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) {
+ kfree(state);
+ return NULL;
+ }
+
+ /* create dvb_frontend */
+ state->frontend.ops = &state->ops;
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+}
+
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h
index e452fc0..c8e1d54 100644
--- a/drivers/media/dvb/frontends/tda1004x.h
+++ b/drivers/media/dvb/frontends/tda1004x.h
@@ -32,10 +32,13 @@
u8 demod_address;
/* does the "inversion" need inverted? */
- u8 invert:1;
+ u8 invert;
/* Does the OCLK signal need inverted? */
- u8 invert_oclk:1;
+ u8 invert_oclk;
+
+ /* value of N_I2C of the CONF_PLL3 register */
+ u8 n_i2c;
/* PLL maintenance */
int (*pll_init)(struct dvb_frontend* fe);
diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c
index da82e90..168e013 100644
--- a/drivers/media/dvb/frontends/tda8083.c
+++ b/drivers/media/dvb/frontends/tda8083.c
@@ -226,7 +226,7 @@
static int tda8083_send_diseqc_msg (struct dvb_frontend* fe,
struct dvb_diseqc_master_cmd *m)
{
- struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+ struct tda8083_state* state = fe->demodulator_priv;
int i;
tda8083_writereg (state, 0x29, (m->msg_len - 3) | (1 << 2)); /* enable */
@@ -243,7 +243,7 @@
static int tda8083_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+ struct tda8083_state* state = fe->demodulator_priv;
u8 signal = ~tda8083_readreg (state, 0x01);
u8 sync = tda8083_readreg (state, 0x02);
@@ -270,7 +270,7 @@
static int tda8083_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+ struct tda8083_state* state = fe->demodulator_priv;
u8 signal = ~tda8083_readreg (state, 0x01);
*strength = (signal << 8) | signal;
@@ -280,7 +280,7 @@
static int tda8083_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+ struct tda8083_state* state = fe->demodulator_priv;
u8 _snr = tda8083_readreg (state, 0x08);
*snr = (_snr << 8) | _snr;
@@ -290,7 +290,7 @@
static int tda8083_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+ struct tda8083_state* state = fe->demodulator_priv;
state->config->pll_set(fe, p);
tda8083_set_inversion (state, p->inversion);
@@ -305,7 +305,7 @@
static int tda8083_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+ struct tda8083_state* state = fe->demodulator_priv;
/* FIXME: get symbolrate & frequency offset...*/
/*p->frequency = ???;*/
@@ -319,7 +319,7 @@
static int tda8083_sleep(struct dvb_frontend* fe)
{
- struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+ struct tda8083_state* state = fe->demodulator_priv;
tda8083_writereg (state, 0x00, 0x02);
return 0;
@@ -327,7 +327,7 @@
static int tda8083_init(struct dvb_frontend* fe)
{
- struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+ struct tda8083_state* state = fe->demodulator_priv;
int i;
for (i=0; i<44; i++)
@@ -343,7 +343,7 @@
static int tda8083_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
{
- struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+ struct tda8083_state* state = fe->demodulator_priv;
tda8083_send_diseqc_burst (state, burst);
tda8083_writereg (state, 0x00, 0x3c);
@@ -354,7 +354,7 @@
static int tda8083_diseqc_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
{
- struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+ struct tda8083_state* state = fe->demodulator_priv;
tda8083_set_tone (state, tone);
tda8083_writereg (state, 0x00, 0x3c);
@@ -365,7 +365,7 @@
static int tda8083_diseqc_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
- struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+ struct tda8083_state* state = fe->demodulator_priv;
tda8083_set_voltage (state, voltage);
tda8083_writereg (state, 0x00, 0x3c);
@@ -376,7 +376,7 @@
static void tda8083_release(struct dvb_frontend* fe)
{
- struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+ struct tda8083_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -388,7 +388,7 @@
struct tda8083_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct tda8083_state*) kmalloc(sizeof(struct tda8083_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct tda8083_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/tda80xx.c b/drivers/media/dvb/frontends/tda80xx.c
index c996321..032d348 100644
--- a/drivers/media/dvb/frontends/tda80xx.c
+++ b/drivers/media/dvb/frontends/tda80xx.c
@@ -27,7 +27,7 @@
#include <linux/spinlock.h>
#include <linux/threads.h>
#include <linux/interrupt.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -400,7 +400,7 @@
static int tda8044_init(struct dvb_frontend* fe)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
int ret;
/*
@@ -432,7 +432,7 @@
static int tda8083_init(struct dvb_frontend* fe)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
tda80xx_write(state, 0x00, tda8083_inittab, sizeof(tda8083_inittab));
@@ -447,7 +447,7 @@
static int tda80xx_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
switch (voltage) {
case SEC_VOLTAGE_13:
@@ -463,7 +463,7 @@
static int tda80xx_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
switch (tone) {
case SEC_TONE_OFF:
@@ -477,7 +477,7 @@
static int tda80xx_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
if (cmd->msg_len > 6)
return -EINVAL;
@@ -492,7 +492,7 @@
static int tda80xx_send_diseqc_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t cmd)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
switch (cmd) {
case SEC_MINI_A:
@@ -512,7 +512,7 @@
static int tda80xx_sleep(struct dvb_frontend* fe)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
tda80xx_writereg(state, 0x00, 0x02); /* enter standby */
@@ -521,7 +521,7 @@
static int tda80xx_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
tda80xx_writereg(state, 0x1c, 0x80);
state->config->pll_set(fe, p);
@@ -537,7 +537,7 @@
static int tda80xx_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
if (!state->config->irq)
tda80xx_read_status_int(state);
@@ -550,7 +550,7 @@
static int tda80xx_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
if (!state->config->irq)
tda80xx_read_status_int(state);
@@ -561,7 +561,7 @@
static int tda80xx_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
int ret;
u8 buf[3];
@@ -575,7 +575,7 @@
static int tda80xx_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
u8 gain = ~tda80xx_readreg(state, 0x01);
*strength = (gain << 8) | gain;
@@ -585,7 +585,7 @@
static int tda80xx_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
u8 quality = tda80xx_readreg(state, 0x08);
*snr = (quality << 8) | quality;
@@ -595,7 +595,7 @@
static int tda80xx_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
*ucblocks = tda80xx_readreg(state, 0x0f);
if (*ucblocks == 0xff)
@@ -606,7 +606,7 @@
static int tda80xx_init(struct dvb_frontend* fe)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
switch(state->id) {
case ID_TDA8044:
@@ -620,7 +620,7 @@
static void tda80xx_release(struct dvb_frontend* fe)
{
- struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+ struct tda80xx_state* state = fe->demodulator_priv;
if (state->config->irq)
free_irq(state->config->irq, &state->worklet);
@@ -637,7 +637,7 @@
int ret;
/* allocate memory for the internal state */
- state = (struct tda80xx_state*) kmalloc(sizeof(struct tda80xx_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct tda80xx_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/frontends/ves1820.c b/drivers/media/dvb/frontends/ves1820.c
index 9c0d23e..70fb44b 100644
--- a/drivers/media/dvb/frontends/ves1820.c
+++ b/drivers/media/dvb/frontends/ves1820.c
@@ -70,7 +70,6 @@
printk("ves1820: %s(): writereg error (reg == 0x%02x,"
"val == 0x%02x, ret == %i)\n", __FUNCTION__, reg, data, ret);
- msleep(10);
return (ret != 1) ? -EREMOTEIO : 0;
}
@@ -193,7 +192,7 @@
static int ves1820_init(struct dvb_frontend* fe)
{
- struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+ struct ves1820_state* state = fe->demodulator_priv;
int i;
int val;
@@ -214,7 +213,7 @@
static int ves1820_set_parameters(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+ struct ves1820_state* state = fe->demodulator_priv;
static const u8 reg0x00[] = { 0x00, 0x04, 0x08, 0x0c, 0x10 };
static const u8 reg0x01[] = { 140, 140, 106, 100, 92 };
static const u8 reg0x05[] = { 135, 100, 70, 54, 38 };
@@ -241,7 +240,7 @@
static int ves1820_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+ struct ves1820_state* state = fe->demodulator_priv;
int sync;
*status = 0;
@@ -267,7 +266,7 @@
static int ves1820_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+ struct ves1820_state* state = fe->demodulator_priv;
u32 _ber = ves1820_readreg(state, 0x14) |
(ves1820_readreg(state, 0x15) << 8) |
@@ -279,7 +278,7 @@
static int ves1820_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+ struct ves1820_state* state = fe->demodulator_priv;
u8 gain = ves1820_readreg(state, 0x17);
*strength = (gain << 8) | gain;
@@ -289,7 +288,7 @@
static int ves1820_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+ struct ves1820_state* state = fe->demodulator_priv;
u8 quality = ~ves1820_readreg(state, 0x18);
*snr = (quality << 8) | quality;
@@ -299,7 +298,7 @@
static int ves1820_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+ struct ves1820_state* state = fe->demodulator_priv;
*ucblocks = ves1820_readreg(state, 0x13) & 0x7f;
if (*ucblocks == 0x7f)
@@ -314,7 +313,7 @@
static int ves1820_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+ struct ves1820_state* state = fe->demodulator_priv;
int sync;
s8 afc = 0;
@@ -345,7 +344,7 @@
static int ves1820_sleep(struct dvb_frontend* fe)
{
- struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+ struct ves1820_state* state = fe->demodulator_priv;
ves1820_writereg(state, 0x1b, 0x02); /* pdown ADC */
ves1820_writereg(state, 0x00, 0x80); /* standby */
@@ -364,7 +363,7 @@
static void ves1820_release(struct dvb_frontend* fe)
{
- struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+ struct ves1820_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -377,7 +376,7 @@
struct ves1820_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct ves1820_state*) kmalloc(sizeof(struct ves1820_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct ves1820_state), GFP_KERNEL);
if (state == NULL)
goto error;
diff --git a/drivers/media/dvb/frontends/ves1x93.c b/drivers/media/dvb/frontends/ves1x93.c
index edcad28..821df8e 100644
--- a/drivers/media/dvb/frontends/ves1x93.c
+++ b/drivers/media/dvb/frontends/ves1x93.c
@@ -263,7 +263,7 @@
static int ves1x93_init (struct dvb_frontend* fe)
{
- struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+ struct ves1x93_state* state = fe->demodulator_priv;
int i;
int val;
@@ -289,7 +289,7 @@
static int ves1x93_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
- struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+ struct ves1x93_state* state = fe->demodulator_priv;
switch (voltage) {
case SEC_VOLTAGE_13:
@@ -305,7 +305,7 @@
static int ves1x93_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+ struct ves1x93_state* state = fe->demodulator_priv;
u8 sync = ves1x93_readreg (state, 0x0e);
@@ -346,7 +346,7 @@
static int ves1x93_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+ struct ves1x93_state* state = fe->demodulator_priv;
*ber = ves1x93_readreg (state, 0x15);
*ber |= (ves1x93_readreg (state, 0x16) << 8);
@@ -358,7 +358,7 @@
static int ves1x93_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+ struct ves1x93_state* state = fe->demodulator_priv;
u8 signal = ~ves1x93_readreg (state, 0x0b);
*strength = (signal << 8) | signal;
@@ -368,7 +368,7 @@
static int ves1x93_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+ struct ves1x93_state* state = fe->demodulator_priv;
u8 _snr = ~ves1x93_readreg (state, 0x1c);
*snr = (_snr << 8) | _snr;
@@ -378,7 +378,7 @@
static int ves1x93_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+ struct ves1x93_state* state = fe->demodulator_priv;
*ucblocks = ves1x93_readreg (state, 0x18) & 0x7f;
@@ -393,7 +393,7 @@
static int ves1x93_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+ struct ves1x93_state* state = fe->demodulator_priv;
ves1x93_writereg(state, 0x00, 0x11);
state->config->pll_set(fe, p);
@@ -408,7 +408,7 @@
static int ves1x93_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
- struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+ struct ves1x93_state* state = fe->demodulator_priv;
int afc;
afc = ((int)((char)(ves1x93_readreg (state, 0x0a) << 1)))/2;
@@ -431,14 +431,14 @@
static int ves1x93_sleep(struct dvb_frontend* fe)
{
- struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+ struct ves1x93_state* state = fe->demodulator_priv;
return ves1x93_writereg (state, 0x00, 0x08);
}
static void ves1x93_release(struct dvb_frontend* fe)
{
- struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+ struct ves1x93_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -451,7 +451,7 @@
u8 identity;
/* allocate memory for the internal state */
- state = (struct ves1x93_state*) kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 922c205..8e33a85 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -130,7 +130,7 @@
av7110->current_input = 0;
if (i2c_writereg(av7110, 0x20, 0x00, 0x00) == 1) {
printk ("dvb-ttpci: Crystal audio DAC @ card %d detected\n",
- av7110->dvb_adapter->num);
+ av7110->dvb_adapter.num);
av7110->adac_type = DVB_ADAC_CRYSTAL;
i2c_writereg(av7110, 0x20, 0x01, 0xd2);
i2c_writereg(av7110, 0x20, 0x02, 0x49);
@@ -145,13 +145,13 @@
}
else if (dev->pci->subsystem_vendor == 0x110a) {
printk("dvb-ttpci: DVB-C w/o analog module @ card %d detected\n",
- av7110->dvb_adapter->num);
+ av7110->dvb_adapter.num);
av7110->adac_type = DVB_ADAC_NONE;
}
else {
av7110->adac_type = adac;
printk("dvb-ttpci: adac type set to %d @ card %d\n",
- av7110->dvb_adapter->num, av7110->adac_type);
+ av7110->dvb_adapter.num, av7110->adac_type);
}
if (av7110->adac_type == DVB_ADAC_NONE || av7110->adac_type == DVB_ADAC_MSP) {
@@ -231,7 +231,7 @@
if (newloops == av7110->arm_loops) {
printk(KERN_ERR "dvb-ttpci: ARM crashed @ card %d\n",
- av7110->dvb_adapter->num);
+ av7110->dvb_adapter.num);
arm_error(av7110);
av7710_set_video_mode(av7110, vidmode);
@@ -1282,7 +1282,7 @@
av7110->dmxdev.demux = &dvbdemux->dmx;
av7110->dmxdev.capabilities = 0;
- dvb_dmxdev_init(&av7110->dmxdev, av7110->dvb_adapter);
+ dvb_dmxdev_init(&av7110->dmxdev, &av7110->dvb_adapter);
av7110->hw_frontend.source = DMX_FRONTEND_0;
@@ -1307,11 +1307,11 @@
av7110_ca_register(av7110);
#ifdef CONFIG_DVB_AV7110_OSD
- dvb_register_device(av7110->dvb_adapter, &av7110->osd_dev,
+ dvb_register_device(&av7110->dvb_adapter, &av7110->osd_dev,
&dvbdev_osd, av7110, DVB_DEVICE_OSD);
#endif
- dvb_net_init(av7110->dvb_adapter, &av7110->dvb_net, &dvbdemux->dmx);
+ dvb_net_init(&av7110->dvb_adapter, &av7110->dvb_net, &dvbdemux->dmx);
if (budgetpatch) {
/* initialize software demux1 without its own frontend
@@ -1334,9 +1334,9 @@
av7110->dmxdev1.demux = &dvbdemux1->dmx;
av7110->dmxdev1.capabilities = 0;
- dvb_dmxdev_init(&av7110->dmxdev1, av7110->dvb_adapter);
+ dvb_dmxdev_init(&av7110->dmxdev1, &av7110->dvb_adapter);
- dvb_net_init(av7110->dvb_adapter, &av7110->dvb_net1, &dvbdemux1->dmx);
+ dvb_net_init(&av7110->dvb_adapter, &av7110->dvb_net1, &dvbdemux1->dmx);
printk("dvb-ttpci: additional demux1 for budget-patch registered\n");
}
return 0;
@@ -1673,6 +1673,106 @@
};
+static u8 alps_bsbe1_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
+ 0x06, 0x40, /* DAC not used, set to high impendance mode */
+ 0x07, 0x00, /* DAC LSB */
+ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
+ 0x09, 0x00, /* FIFO */
+ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
+ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
+ 0x10, 0x3f, // AGC2 0x3d
+ 0x11, 0x84,
+ 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
+ 0x15, 0xc9, // lock detector threshold
+ 0x16, 0x00,
+ 0x17, 0x00,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
+ 0x29, 0x1e, // 1/2 threshold
+ 0x2a, 0x14, // 2/3 threshold
+ 0x2b, 0x0f, // 3/4 threshold
+ 0x2c, 0x09, // 5/6 threshold
+ 0x2d, 0x05, // 7/8 threshold
+ 0x2e, 0x01,
+ 0x31, 0x1f, // test all FECs
+ 0x32, 0x19, // viterbi and synchro search
+ 0x33, 0xfc, // rs control
+ 0x34, 0x93, // error control
+ 0x0f, 0x92,
+ 0xff, 0xff
+};
+
+static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ struct av7110* av7110 = (struct av7110*) fe->dvb->priv;
+ int ret;
+ u8 data[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ if ((params->frequency < 950000) || (params->frequency > 2150000))
+ return -EINVAL;
+
+ div = (params->frequency + (125 - 1)) / 125; // round correctly
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+ data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
+
+ ret = i2c_transfer(&av7110->i2c_adap, &msg, 1);
+ return (ret != 1) ? -EIO : 0;
+}
+
+static struct stv0299_config alps_bsbe1_config = {
+ .demod_address = 0x68,
+ .inittab = alps_bsbe1_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .enhanced_tuning = 0,
+ .skip_reinit = 0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = alps_bsru6_set_symbol_rate,
+ .pll_set = alps_bsbe1_pll_set,
+};
+
+static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+{
+ struct av7110* av7110 = (struct av7110*) fe->dvb->priv;
+ int ret;
+ u8 data[1];
+ struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ switch(voltage) {
+ case SEC_VOLTAGE_OFF:
+ data[0] = 0x00;
+ break;
+ case SEC_VOLTAGE_13:
+ data[0] = 0x44;
+ break;
+ case SEC_VOLTAGE_18:
+ data[0] = 0x4c;
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ ret = i2c_transfer(&av7110->i2c_adap, &msg, 1);
+ return (ret != 1) ? -EIO : 0;
+}
+
static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
@@ -2116,6 +2216,14 @@
av7110->dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
break;
}
+ break;
+
+ case 0x000E: /* Hauppauge/TT Nexus-S rev 2.3 */
+ /* ALPS BSBE1 */
+ av7110->fe = stv0299_attach(&alps_bsbe1_config, &av7110->i2c_adap);
+ if (av7110->fe)
+ av7110->fe->ops->set_voltage = lnbp21_set_voltage;
+ break;
}
}
@@ -2138,7 +2246,7 @@
FE_FUNC_OVERRIDE(av7110->fe->ops->dishnetwork_send_legacy_command, av7110->fe_dishnetwork_send_legacy_command, av7110_fe_dishnetwork_send_legacy_command);
FE_FUNC_OVERRIDE(av7110->fe->ops->set_frontend, av7110->fe_set_frontend, av7110_fe_set_frontend);
- ret = dvb_register_frontend(av7110->dvb_adapter, av7110->fe);
+ ret = dvb_register_frontend(&av7110->dvb_adapter, av7110->fe);
if (ret < 0) {
printk("av7110: Frontend registration failed!\n");
if (av7110->fe->ops->release)
@@ -2352,7 +2460,7 @@
goto err_dvb_unregister_adapter_2;
ttpci_eeprom_parse_mac(&av7110->i2c_adap,
- av7110->dvb_adapter->proposed_mac);
+ av7110->dvb_adapter.proposed_mac);
ret = -ENOMEM;
if (budgetpatch) {
@@ -2523,7 +2631,7 @@
if (ret < 0)
goto err_av7110_unregister_11;
- av7110->dvb_adapter->priv = av7110;
+ av7110->dvb_adapter.priv = av7110;
ret = frontend_init(av7110);
if (ret < 0)
goto err_av7110_exit_v4l_12;
@@ -2558,7 +2666,7 @@
err_i2c_del_3:
i2c_del_adapter(&av7110->i2c_adap);
err_dvb_unregister_adapter_2:
- dvb_unregister_adapter(av7110->dvb_adapter);
+ dvb_unregister_adapter(&av7110->dvb_adapter);
err_put_firmware_1:
put_firmware(av7110);
err_kfree_0:
@@ -2604,7 +2712,7 @@
i2c_del_adapter(&av7110->i2c_adap);
- dvb_unregister_adapter (av7110->dvb_adapter);
+ dvb_unregister_adapter (&av7110->dvb_adapter);
av7110_num--;
@@ -2672,21 +2780,23 @@
MAKE_AV7110_INFO(ttc_1_X, "Technotrend/Hauppauge WinTV Nexus-CA rev1.X");
MAKE_AV7110_INFO(ttc_2_X, "Technotrend/Hauppauge WinTV DVB-C rev2.X");
MAKE_AV7110_INFO(tts_2_X, "Technotrend/Hauppauge WinTV Nexus-S rev2.X");
+MAKE_AV7110_INFO(tts_2_3, "Technotrend/Hauppauge WinTV Nexus-S rev2.3");
MAKE_AV7110_INFO(tts_1_3se, "Technotrend/Hauppauge WinTV DVB-S rev1.3 SE");
MAKE_AV7110_INFO(ttt, "Technotrend/Hauppauge DVB-T");
MAKE_AV7110_INFO(fsc, "Fujitsu Siemens DVB-C");
MAKE_AV7110_INFO(fss, "Fujitsu Siemens DVB-S rev1.6");
static struct pci_device_id pci_tbl[] = {
+ MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000),
MAKE_EXTENSION_PCI(tts_1_X, 0x13c2, 0x0000),
MAKE_EXTENSION_PCI(ttt_1_X, 0x13c2, 0x0001),
MAKE_EXTENSION_PCI(ttc_2_X, 0x13c2, 0x0002),
MAKE_EXTENSION_PCI(tts_2_X, 0x13c2, 0x0003),
- MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002),
- MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000),
- MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a),
MAKE_EXTENSION_PCI(fss, 0x13c2, 0x0006),
MAKE_EXTENSION_PCI(ttt, 0x13c2, 0x0008),
+ MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a),
+ MAKE_EXTENSION_PCI(tts_2_3, 0x13c2, 0x000e),
+ MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002),
/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0004), UNDEFINED CARD */ // Galaxis DVB PC-Sat-Carte
/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1
diff --git a/drivers/media/dvb/ttpci/av7110.h b/drivers/media/dvb/ttpci/av7110.h
index 5070e05..4f69b4d 100644
--- a/drivers/media/dvb/ttpci/av7110.h
+++ b/drivers/media/dvb/ttpci/av7110.h
@@ -220,7 +220,7 @@
struct audio_mixer mixer;
- struct dvb_adapter *dvb_adapter;
+ struct dvb_adapter dvb_adapter;
struct dvb_device *video_dev;
struct dvb_device *audio_dev;
struct dvb_device *ca_dev;
@@ -274,7 +274,6 @@
extern int i2c_writereg(struct av7110 *av7110, u8 id, u8 reg, u8 val);
extern u8 i2c_readreg(struct av7110 *av7110, u8 id, u8 reg);
extern int msp_writereg(struct av7110 *av7110, u8 dev, u16 reg, u16 val);
-extern int msp_readreg(struct av7110 *av7110, u8 dev, u16 reg, u16 *val);
extern int av7110_init_analog_module(struct av7110 *av7110);
diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c
index d77e8a0..ccf9461 100644
--- a/drivers/media/dvb/ttpci/av7110_av.c
+++ b/drivers/media/dvb/ttpci/av7110_av.c
@@ -1075,7 +1075,7 @@
}
if (ret < 0)
break;
- av7110->videostate.video_format = format;
+ av7110->videostate.display_format = format;
ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetPanScanType,
1, (u16) val);
break;
@@ -1230,14 +1230,20 @@
switch(av7110->audiostate.channel_select) {
case AUDIO_STEREO:
audcom(av7110, AUDIO_CMD_STEREO);
+ if (av7110->adac_type == DVB_ADAC_CRYSTAL)
+ i2c_writereg(av7110, 0x20, 0x02, 0x49);
break;
case AUDIO_MONO_LEFT:
audcom(av7110, AUDIO_CMD_MONO_L);
+ if (av7110->adac_type == DVB_ADAC_CRYSTAL)
+ i2c_writereg(av7110, 0x20, 0x02, 0x4a);
break;
case AUDIO_MONO_RIGHT:
audcom(av7110, AUDIO_CMD_MONO_R);
+ if (av7110->adac_type == DVB_ADAC_CRYSTAL)
+ i2c_writereg(av7110, 0x20, 0x02, 0x45);
break;
default:
@@ -1409,10 +1415,10 @@
av7110->video_events.overflow = 0;
memset(&av7110->video_size, 0, sizeof (video_size_t));
- dvb_register_device(av7110->dvb_adapter, &av7110->video_dev,
+ dvb_register_device(&av7110->dvb_adapter, &av7110->video_dev,
&dvbdev_video, av7110, DVB_DEVICE_VIDEO);
- dvb_register_device(av7110->dvb_adapter, &av7110->audio_dev,
+ dvb_register_device(&av7110->dvb_adapter, &av7110->audio_dev,
&dvbdev_audio, av7110, DVB_DEVICE_AUDIO);
return 0;
diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c
index 21f7aac..c3801e3 100644
--- a/drivers/media/dvb/ttpci/av7110_ca.c
+++ b/drivers/media/dvb/ttpci/av7110_ca.c
@@ -123,7 +123,7 @@
}
static int ci_ll_reset(struct dvb_ringbuffer *cibuf, struct file *file,
- int slots, ca_slot_info_t *slot)
+ int slots, ca_slot_info_t *slot)
{
int i;
int len = 0;
@@ -370,7 +370,7 @@
int av7110_ca_register(struct av7110 *av7110)
{
- return dvb_register_device(av7110->dvb_adapter, &av7110->ca_dev,
+ return dvb_register_device(&av7110->dvb_adapter, &av7110->ca_dev,
&dvbdev_ca, av7110, DVB_DEVICE_CA);
}
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index bd6e5ea..7fa4a0e 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -104,7 +104,7 @@
/* av7110 ARM core boot stuff */
-
+#if 0
void av7110_reset_arm(struct av7110 *av7110)
{
saa7146_setgpio(av7110->dev, RESET_LINE, SAA7146_GPIO_OUTLO);
@@ -124,7 +124,7 @@
av7110->arm_ready = 1;
dprintk(1, "reset ARM\n");
}
-
+#endif /* 0 */
static int waitdebi(struct av7110 *av7110, int adr, int state)
{
@@ -335,7 +335,7 @@
return 0;
}
-int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length)
+static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length)
{
int i;
unsigned long start;
@@ -455,7 +455,7 @@
return 0;
}
-int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length)
+static int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length)
{
int ret;
@@ -500,6 +500,7 @@
return ret;
}
+#if 0
int av7110_send_ci_cmd(struct av7110 *av7110, u8 subcom, u8 *buf, u8 len)
{
int i, ret;
@@ -521,6 +522,7 @@
printk(KERN_ERR "dvb-ttpci: av7110_send_ci_cmd error %d\n", ret);
return ret;
}
+#endif /* 0 */
int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
int request_buf_len, u16 *reply_buf, int reply_buf_len)
@@ -593,7 +595,7 @@
return 0;
}
-int av7110_fw_query(struct av7110 *av7110, u16 tag, u16* buf, s16 length)
+static int av7110_fw_query(struct av7110 *av7110, u16 tag, u16* buf, s16 length)
{
int ret;
ret = av7110_fw_request(av7110, &tag, 0, buf, length);
@@ -617,7 +619,7 @@
if (av7110_fw_query(av7110, tag, buf, 16)) {
printk("dvb-ttpci: failed to boot firmware @ card %d\n",
- av7110->dvb_adapter->num);
+ av7110->dvb_adapter.num);
return -EIO;
}
@@ -628,16 +630,16 @@
av7110->avtype = (buf[8] << 16) + buf[9];
printk("dvb-ttpci: info @ card %d: firm %08x, rtsl %08x, vid %08x, app %08x\n",
- av7110->dvb_adapter->num, av7110->arm_fw,
+ av7110->dvb_adapter.num, av7110->arm_fw,
av7110->arm_rtsl, av7110->arm_vid, av7110->arm_app);
/* print firmware capabilities */
if (FW_CI_LL_SUPPORT(av7110->arm_app))
printk("dvb-ttpci: firmware @ card %d supports CI link layer interface\n",
- av7110->dvb_adapter->num);
+ av7110->dvb_adapter.num);
else
printk("dvb-ttpci: no firmware support for CI link layer interface @ card %d\n",
- av7110->dvb_adapter->num);
+ av7110->dvb_adapter.num);
return 0;
}
diff --git a/drivers/media/dvb/ttpci/av7110_hw.h b/drivers/media/dvb/ttpci/av7110_hw.h
index bf901c6..52061e1 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.h
+++ b/drivers/media/dvb/ttpci/av7110_hw.h
@@ -364,7 +364,6 @@
-extern void av7110_reset_arm(struct av7110 *av7110);
extern int av7110_bootarm(struct av7110 *av7110);
extern int av7110_firmversion(struct av7110 *av7110);
#define FW_CI_LL_SUPPORT(arm_app) ((arm_app) & 0x80000000)
@@ -373,12 +372,8 @@
extern int av7110_wait_msgstate(struct av7110 *av7110, u16 flags);
extern int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...);
-extern int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length);
-extern int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length);
-extern int av7110_send_ci_cmd(struct av7110 *av7110, u8 subcom, u8 *buf, u8 len);
extern int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
int request_buf_len, u16 *reply_buf, int reply_buf_len);
-extern int av7110_fw_query(struct av7110 *av7110, u16 tag, u16* Buff, s16 length);
/* DEBI (saa7146 data extension bus interface) access */
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index 6d2256f..665cdb8 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -10,7 +10,7 @@
#define UP_TIMEOUT (HZ/4)
-/* enable ir debugging by or'ing av7110_debug with 16 */
+/* enable ir debugging by or'ing debug with 16 */
static int ir_initialized;
static struct input_dev input_dev;
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index eb84fb0..e65fc36 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -46,13 +46,13 @@
if (i2c_transfer(&av7110->i2c_adap, &msgs, 1) != 1) {
dprintk(1, "dvb-ttpci: failed @ card %d, %u = %u\n",
- av7110->dvb_adapter->num, reg, val);
+ av7110->dvb_adapter.num, reg, val);
return -EIO;
}
return 0;
}
-int msp_readreg(struct av7110 *av7110, u8 dev, u16 reg, u16 *val)
+static int msp_readreg(struct av7110 *av7110, u8 dev, u16 reg, u16 *val)
{
u8 msg1[3] = { dev, reg >> 8, reg & 0xff };
u8 msg2[2];
@@ -63,7 +63,7 @@
if (i2c_transfer(&av7110->i2c_adap, &msgs[0], 2) != 2) {
dprintk(1, "dvb-ttpci: failed @ card %d, %u\n",
- av7110->dvb_adapter->num, reg);
+ av7110->dvb_adapter.num, reg);
return -EIO;
}
*val = (msg2[0] << 8) | msg2[1];
@@ -552,13 +552,13 @@
return -ENODEV;
printk("dvb-ttpci: DVB-C analog module @ card %d detected, initializing MSP3400\n",
- av7110->dvb_adapter->num);
+ av7110->dvb_adapter.num);
av7110->adac_type = DVB_ADAC_MSP;
msleep(100); // the probing above resets the msp...
msp_readreg(av7110, MSP_RD_DSP, 0x001e, &version1);
msp_readreg(av7110, MSP_RD_DSP, 0x001f, &version2);
dprintk(1, "dvb-ttpci: @ card %d MSP3400 version 0x%04x 0x%04x\n",
- av7110->dvb_adapter->num, version1, version2);
+ av7110->dvb_adapter.num, version1, version2);
msp_writereg(av7110, MSP_WR_DSP, 0x0013, 0x0c00);
msp_writereg(av7110, MSP_WR_DSP, 0x0000, 0x7f00); // loudspeaker + headphone
msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0220); // loudspeaker source
@@ -596,7 +596,7 @@
/* init the saa7113 */
while (*i != 0xff) {
if (i2c_writereg(av7110, 0x48, i[0], i[1]) != 1) {
- dprintk(1, "saa7113 initialization failed @ card %d", av7110->dvb_adapter->num);
+ dprintk(1, "saa7113 initialization failed @ card %d", av7110->dvb_adapter.num);
break;
}
i += 2;
@@ -726,11 +726,11 @@
{
struct av7110 *av7110 = (struct av7110*) dev->ext_priv;
- if (std->id == V4L2_STD_PAL) {
+ if (std->id & V4L2_STD_PAL) {
av7110->vidmode = VIDEO_MODE_PAL;
av7110_set_vidmode(av7110, av7110->vidmode);
}
- else if (std->id == V4L2_STD_NTSC) {
+ else if (std->id & V4L2_STD_NTSC) {
av7110->vidmode = VIDEO_MODE_NTSC;
av7110_set_vidmode(av7110, av7110->vidmode);
}
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 14e9632..6e0f5d3 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -59,8 +59,12 @@
struct dvb_ca_en50221 ca;
};
-static int enable_ci = 0;
-
+/* GPIO CI Connections:
+ * 0 - Vcc/Reset (Reset is controlled by capacitor)
+ * 1 - Attribute Memory
+ * 2 - Card Enable (Active Low)
+ * 3 - Card Detect
+ */
/****************************************************************************
* INITIALIZATION
@@ -188,22 +192,35 @@
{
struct budget_av *budget_av = (struct budget_av *) ca->data;
struct saa7146_dev *saa = budget_av->budget.dev;
- int max = 20;
+ int timeout = 50; // 5 seconds (4.4.6 Ready)
if (slot != 0)
return -EINVAL;
dprintk(1, "ciintf_slot_reset\n");
- /* reset the card */
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
- msleep(100);
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
- while (--max > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
+ msleep(2);
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */
+ msleep(20); /* 20 ms Vcc settling time */
+
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
+
+ /* This should have been based on pin 16 READY of the pcmcia port,
+ * but AFAICS it is not routed to the saa7146 */
+ while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
msleep(100);
- ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+ if (timeout <= 0)
+ {
+ printk(KERN_ERR "budget-av: cam reset failed (timeout).\n");
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
+ return -ETIMEDOUT;
+ }
+
return 0;
}
@@ -240,7 +257,6 @@
{
struct budget_av *budget_av = (struct budget_av *) ca->data;
struct saa7146_dev *saa = budget_av->budget.dev;
- int cam = 0;
if (slot != 0)
return -EINVAL;
@@ -248,15 +264,21 @@
if (!budget_av->slot_status) {
saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
udelay(1);
- cam = saa7146_read(saa, PSR) & MASK_06;
- saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
-
- if (cam)
+ if (saa7146_read(saa, PSR) & MASK_06)
+ {
+ printk(KERN_INFO "budget-av: cam inserted\n");
budget_av->slot_status = 1;
+ }
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
} else if (!open) {
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
+ {
+ printk(KERN_INFO "budget-av: cam ejected\n");
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
budget_av->slot_status = 0;
+ }
}
if (budget_av->slot_status == 1)
@@ -272,17 +294,11 @@
memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
- /* setup GPIOs */
- saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+ saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
- /* Reset the card */
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
- msleep(50);
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
- msleep(100);
-
/* Enable DEBI pins */
saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
@@ -297,13 +313,14 @@
budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
budget_av->ca.data = budget_av;
- if ((result = dvb_ca_en50221_init(budget_av->budget.dvb_adapter,
+
+ if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
&budget_av->ca, 0, 1)) != 0) {
- printk("budget_av: CI interface detected, but initialisation failed.\n");
+ printk(KERN_ERR "budget-av: ci initialisation failed.\n");
goto error;
}
- // success!
- printk("ciintf_init: CI interface initialised\n");
+
+ printk(KERN_INFO "budget-av: ci interface initialised.\n");
budget_av->budget.ci_present = 1;
return 0;
@@ -361,8 +378,12 @@
static int saa7113_init(struct budget_av *budget_av)
{
struct budget *budget = &budget_av->budget;
+ struct saa7146_dev *saa = budget->dev;
const u8 *data = saa7113_tab;
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
+ msleep(200);
+
if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
dprintk(1, "saa7113 not found on KNC card\n");
return -ENODEV;
@@ -697,75 +718,90 @@
return pwm;
}
+#define SUBID_DVBS_KNC1 0x0010
+#define SUBID_DVBS_KNC1_PLUS 0x0011
+#define SUBID_DVBS_TYPHOON 0x4f56
+#define SUBID_DVBS_CINERGY1200 0x1154
+
+#define SUBID_DVBC_KNC1 0x0020
+#define SUBID_DVBC_KNC1_PLUS 0x0021
+#define SUBID_DVBC_CINERGY1200 0x1156
+
+#define SUBID_DVBT_KNC1_PLUS 0x0031
+#define SUBID_DVBT_KNC1 0x0030
+#define SUBID_DVBT_CINERGY1200 0x1157
static void frontend_init(struct budget_av *budget_av)
{
- switch (budget_av->budget.dev->pci->subsystem_device) {
- case 0x4f56: // Typhoon/KNC1 DVB-S budget (stv0299/Philips SU1278(tsa5059))
- budget_av->budget.dvb_frontend =
- stv0299_attach(&typhoon_config, &budget_av->budget.i2c_adap);
- if (budget_av->budget.dvb_frontend != NULL) {
+ struct saa7146_dev * saa = budget_av->budget.dev;
+ struct dvb_frontend * fe = NULL;
+
+ switch (saa->pci->subsystem_device) {
+ case SUBID_DVBS_KNC1_PLUS:
+ case SUBID_DVBC_KNC1_PLUS:
+ case SUBID_DVBT_KNC1_PLUS:
+ // Enable / PowerON Frontend
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
break;
- }
+ }
+
+ switch (saa->pci->subsystem_device) {
+
+ case SUBID_DVBS_KNC1:
+ case SUBID_DVBS_KNC1_PLUS:
+ case SUBID_DVBS_TYPHOON:
+ fe = stv0299_attach(&typhoon_config,
+ &budget_av->budget.i2c_adap);
break;
- case 0x0020: // KNC1 DVB-C budget (tda10021/Philips CU1216(tua6034))
- budget_av->budget.dvb_frontend =
- tda10021_attach(&philips_cu1216_config,
- &budget_av->budget.i2c_adap, read_pwm(budget_av));
- if (budget_av->budget.dvb_frontend != NULL) {
- break;
- }
+ case SUBID_DVBS_CINERGY1200:
+ fe = stv0299_attach(&cinergy_1200s_config,
+ &budget_av->budget.i2c_adap);
break;
- case 0x0030: // KNC1 DVB-T budget (tda10046/Philips TU1216(tda6651tt))
- budget_av->budget.dvb_frontend =
- tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
- if (budget_av->budget.dvb_frontend != NULL) {
- break;
- }
+ case SUBID_DVBC_KNC1:
+ case SUBID_DVBC_KNC1_PLUS:
+ fe = tda10021_attach(&philips_cu1216_config,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
break;
- case 0x1154: // TerraTec Cinergy 1200 DVB-S (stv0299/Philips SU1278(tsa5059))
- budget_av->budget.dvb_frontend =
- stv0299_attach(&cinergy_1200s_config, &budget_av->budget.i2c_adap);
- if (budget_av->budget.dvb_frontend != NULL) {
- break;
- }
+ case SUBID_DVBT_KNC1:
+ case SUBID_DVBT_KNC1_PLUS:
+ fe = tda10046_attach(&philips_tu1216_config,
+ &budget_av->budget.i2c_adap);
break;
- case 0x1156: // Terratec Cinergy 1200 DVB-C (tda10021/Philips CU1216(tua6034))
- budget_av->budget.dvb_frontend =
- tda10021_attach(&philips_cu1216_config,
- &budget_av->budget.i2c_adap, read_pwm(budget_av));
- if (budget_av->budget.dvb_frontend) {
- break;
- }
+ case SUBID_DVBC_CINERGY1200:
+ fe = tda10021_attach(&philips_cu1216_config,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
break;
- case 0x1157: // Terratec Cinergy 1200 DVB-T (tda10046/Philips TU1216(tda6651tt))
- budget_av->budget.dvb_frontend =
- tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
- if (budget_av->budget.dvb_frontend) {
- break;
- }
+ case SUBID_DVBT_CINERGY1200:
+ fe = tda10046_attach(&philips_tu1216_config,
+ &budget_av->budget.i2c_adap);
break;
}
- if (budget_av->budget.dvb_frontend == NULL) {
- printk("budget_av: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
- budget_av->budget.dev->pci->vendor,
- budget_av->budget.dev->pci->device,
- budget_av->budget.dev->pci->subsystem_vendor,
- budget_av->budget.dev->pci->subsystem_device);
- } else {
- if (dvb_register_frontend
- (budget_av->budget.dvb_adapter, budget_av->budget.dvb_frontend)) {
- printk("budget-av: Frontend registration failed!\n");
- if (budget_av->budget.dvb_frontend->ops->release)
- budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
- budget_av->budget.dvb_frontend = NULL;
- }
+ if (fe == NULL) {
+ printk(KERN_ERR "budget-av: A frontend driver was not found "
+ "for device %04x/%04x subsystem %04x/%04x\n",
+ saa->pci->vendor,
+ saa->pci->device,
+ saa->pci->subsystem_vendor,
+ saa->pci->subsystem_device);
+ return;
+ }
+
+ budget_av->budget.dvb_frontend = fe;
+
+ if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
+ budget_av->budget.dvb_frontend)) {
+ printk(KERN_ERR "budget-av: Frontend registration failed!\n");
+ if (budget_av->budget.dvb_frontend->ops->release)
+ budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
+ budget_av->budget.dvb_frontend = NULL;
}
}
@@ -822,6 +858,7 @@
memset(budget_av, 0, sizeof(struct budget_av));
+ budget_av->has_saa7113 = 0;
budget_av->budget.ci_present = 0;
dev->ext_priv = budget_av;
@@ -836,10 +873,7 @@
saa7146_write(dev, DD1_INIT, 0x07000600);
saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
- saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTHI);
- msleep(500);
-
- if (0 == saa7113_init(budget_av)) {
+ if (saa7113_init(budget_av) == 0) {
budget_av->has_saa7113 = 1;
if (0 != saa7146_vv_init(dev, &vv_data)) {
@@ -860,31 +894,26 @@
saa7113_setinput(budget_av, 0);
} else {
- budget_av->has_saa7113 = 0;
-
- saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
+ ciintf_init(budget_av);
}
/* fixme: find some sane values here... */
saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
- mac = budget_av->budget.dvb_adapter->proposed_mac;
+ mac = budget_av->budget.dvb_adapter.proposed_mac;
if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
- printk("KNC1-%d: Could not read MAC from KNC1 card\n",
- budget_av->budget.dvb_adapter->num);
+ printk(KERN_ERR "KNC1-%d: Could not read MAC from KNC1 card\n",
+ budget_av->budget.dvb_adapter.num);
memset(mac, 0, 6);
} else {
- printk("KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
- budget_av->budget.dvb_adapter->num,
+ printk(KERN_INFO "KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+ budget_av->budget.dvb_adapter.num,
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
}
- budget_av->budget.dvb_adapter->priv = budget_av;
+ budget_av->budget.dvb_adapter.priv = budget_av;
frontend_init(budget_av);
- if (enable_ci)
- ciintf_init(budget_av);
-
return 0;
}
@@ -963,14 +992,21 @@
MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
+MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
+MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
+MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
+ MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
+ MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
+ MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
+ MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
@@ -1010,5 +1046,3 @@
MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
"budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
-module_param_named(enable_ci, enable_ci, int, 0644);
-MODULE_PARM_DESC(enable_ci, "Turn on/off CI module (default:off).");
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 521111be..dce1161 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -395,7 +395,7 @@
budget_ci->ca.slot_shutdown = ciintf_slot_shutdown;
budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable;
budget_ci->ca.data = budget_ci;
- if ((result = dvb_ca_en50221_init(budget_ci->budget.dvb_adapter,
+ if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
&budget_ci->ca,
DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
DVB_CA_EN50221_FLAG_IRQ_FR |
@@ -881,7 +881,7 @@
budget_ci->budget.dev->pci->subsystem_device);
} else {
if (dvb_register_frontend
- (budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) {
+ (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) {
printk("budget-ci: Frontend registration failed!\n");
if (budget_ci->budget.dvb_frontend->ops->release)
budget_ci->budget.dvb_frontend->ops->release(budget_ci->budget.dvb_frontend);
@@ -916,7 +916,7 @@
ciintf_init(budget_ci);
- budget_ci->budget.dvb_adapter->priv = budget_ci;
+ budget_ci->budget.dvb_adapter.priv = budget_ci;
frontend_init(budget_ci);
return 0;
diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
index 93a9b40..0498a05 100644
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ b/drivers/media/dvb/ttpci/budget-core.c
@@ -298,7 +298,7 @@
budget->dmxdev.demux = &dvbdemux->dmx;
budget->dmxdev.capabilities = 0;
- dvb_dmxdev_init(&budget->dmxdev, budget->dvb_adapter);
+ dvb_dmxdev_init(&budget->dmxdev, &budget->dvb_adapter);
budget->hw_frontend.source = DMX_FRONTEND_0;
@@ -316,7 +316,7 @@
if (ret < 0)
return ret;
- dvb_net_init(budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx);
+ dvb_net_init(&budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx);
return 0;
}
@@ -385,11 +385,11 @@
strcpy(budget->i2c_adap.name, budget->card->name);
if (i2c_add_adapter(&budget->i2c_adap) < 0) {
- dvb_unregister_adapter(budget->dvb_adapter);
+ dvb_unregister_adapter(&budget->dvb_adapter);
return -ENOMEM;
}
- ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter->proposed_mac);
+ ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter.proposed_mac);
if (NULL ==
(budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, length, &budget->pt))) {
@@ -417,7 +417,7 @@
vfree(budget->grabbing);
- dvb_unregister_adapter(budget->dvb_adapter);
+ dvb_unregister_adapter(&budget->dvb_adapter);
return ret;
}
@@ -432,7 +432,7 @@
i2c_del_adapter(&budget->i2c_adap);
- dvb_unregister_adapter(budget->dvb_adapter);
+ dvb_unregister_adapter(&budget->dvb_adapter);
tasklet_kill(&budget->vpe_tasklet);
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 5d524a4..8142e26 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -453,7 +453,7 @@
budget->dev->pci->subsystem_vendor,
budget->dev->pci->subsystem_device);
} else {
- if (dvb_register_frontend(budget->dvb_adapter, budget->dvb_frontend)) {
+ if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) {
printk("budget-av: Frontend registration failed!\n");
if (budget->dvb_frontend->ops->release)
budget->dvb_frontend->ops->release(budget->dvb_frontend);
@@ -702,7 +702,7 @@
dev->ext_priv = budget;
- budget->dvb_adapter->priv = budget;
+ budget->dvb_adapter.priv = budget;
frontend_init(budget);
return 0;
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index 5e6a10f..083fd44 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -468,7 +468,7 @@
budget->dev->pci->subsystem_vendor,
budget->dev->pci->subsystem_device);
} else {
- if (dvb_register_frontend(budget->dvb_adapter, budget->dvb_frontend)) {
+ if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) {
printk("budget: Frontend registration failed!\n");
if (budget->dvb_frontend->ops->release)
budget->dvb_frontend->ops->release(budget->dvb_frontend);
@@ -497,7 +497,7 @@
return err;
}
- budget->dvb_adapter->priv = budget;
+ budget->dvb_adapter.priv = budget;
frontend_init(budget);
return 0;
diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h
index 10bd41f..c6ef496b 100644
--- a/drivers/media/dvb/ttpci/budget.h
+++ b/drivers/media/dvb/ttpci/budget.h
@@ -64,7 +64,7 @@
spinlock_t debilock;
- struct dvb_adapter *dvb_adapter;
+ struct dvb_adapter dvb_adapter;
struct dvb_frontend *dvb_frontend;
void *priv;
};
@@ -92,6 +92,9 @@
#define BUDGET_KNC1S 8
#define BUDGET_KNC1C 9
#define BUDGET_KNC1T 10
+#define BUDGET_KNC1SP 11
+#define BUDGET_KNC1CP 12
+#define BUDGET_KNC1TP 13
#define BUDGET_VIDEO_PORTA 0
#define BUDGET_VIDEO_PORTB 1
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 4c046ec..afa0e7a 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -84,7 +84,7 @@
struct semaphore semi2c;
struct semaphore semusb;
- struct dvb_adapter *adapter;
+ struct dvb_adapter adapter;
struct usb_device *dev;
struct i2c_adapter i2c_adap;
@@ -1065,7 +1065,7 @@
return 0;
}
-struct cx22700_config alps_tdmb7_config = {
+static struct cx22700_config alps_tdmb7_config = {
.demod_address = 0x43,
.pll_set = alps_tdmb7_pll_set,
};
@@ -1412,7 +1412,7 @@
le16_to_cpu(ttusb->dev->descriptor.idVendor),
le16_to_cpu(ttusb->dev->descriptor.idProduct));
} else {
- if (dvb_register_frontend(ttusb->adapter, ttusb->fe)) {
+ if (dvb_register_frontend(&ttusb->adapter, ttusb->fe)) {
printk("dvb-ttusb-budget: Frontend registration failed!\n");
if (ttusb->fe->ops->release)
ttusb->fe->ops->release(ttusb->fe);
@@ -1462,7 +1462,7 @@
up(&ttusb->semi2c);
dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE);
- ttusb->adapter->priv = ttusb;
+ ttusb->adapter.priv = ttusb;
/* i2c */
memset(&ttusb->i2c_adap, 0, sizeof(struct i2c_adapter));
@@ -1481,7 +1481,7 @@
result = i2c_add_adapter(&ttusb->i2c_adap);
if (result) {
- dvb_unregister_adapter (ttusb->adapter);
+ dvb_unregister_adapter (&ttusb->adapter);
return result;
}
@@ -1503,7 +1503,7 @@
if ((result = dvb_dmx_init(&ttusb->dvb_demux)) < 0) {
printk("ttusb_dvb: dvb_dmx_init failed (errno = %d)\n", result);
i2c_del_adapter(&ttusb->i2c_adap);
- dvb_unregister_adapter (ttusb->adapter);
+ dvb_unregister_adapter (&ttusb->adapter);
return -ENODEV;
}
//FIXME dmxdev (nur WAS?)
@@ -1511,21 +1511,21 @@
ttusb->dmxdev.demux = &ttusb->dvb_demux.dmx;
ttusb->dmxdev.capabilities = 0;
- if ((result = dvb_dmxdev_init(&ttusb->dmxdev, ttusb->adapter)) < 0) {
+ if ((result = dvb_dmxdev_init(&ttusb->dmxdev, &ttusb->adapter)) < 0) {
printk("ttusb_dvb: dvb_dmxdev_init failed (errno = %d)\n",
result);
dvb_dmx_release(&ttusb->dvb_demux);
i2c_del_adapter(&ttusb->i2c_adap);
- dvb_unregister_adapter (ttusb->adapter);
+ dvb_unregister_adapter (&ttusb->adapter);
return -ENODEV;
}
- if (dvb_net_init(ttusb->adapter, &ttusb->dvbnet, &ttusb->dvb_demux.dmx)) {
+ if (dvb_net_init(&ttusb->adapter, &ttusb->dvbnet, &ttusb->dvb_demux.dmx)) {
printk("ttusb_dvb: dvb_net_init failed!\n");
dvb_dmxdev_release(&ttusb->dmxdev);
dvb_dmx_release(&ttusb->dvb_demux);
i2c_del_adapter(&ttusb->i2c_adap);
- dvb_unregister_adapter (ttusb->adapter);
+ dvb_unregister_adapter (&ttusb->adapter);
return -ENODEV;
}
@@ -1559,7 +1559,7 @@
dvb_dmx_release(&ttusb->dvb_demux);
if (ttusb->fe != NULL) dvb_unregister_frontend(ttusb->fe);
i2c_del_adapter(&ttusb->i2c_adap);
- dvb_unregister_adapter(ttusb->adapter);
+ dvb_unregister_adapter(&ttusb->adapter);
ttusb_free_iso_urbs(ttusb);
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 64e771b..505bdaf 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -98,7 +98,7 @@
int can_playback;
/* DVB bits */
- struct dvb_adapter *adapter;
+ struct dvb_adapter adapter;
struct dmxdev dmxdev;
struct dvb_demux demux;
struct dmx_frontend frontend;
@@ -1435,7 +1435,7 @@
printk("%s: dvb_dmx_init failed: error %d\n", __FUNCTION__,
result);
- dvb_unregister_adapter(dec->adapter);
+ dvb_unregister_adapter(&dec->adapter);
return result;
}
@@ -1444,12 +1444,12 @@
dec->dmxdev.demux = &dec->demux.dmx;
dec->dmxdev.capabilities = 0;
- if ((result = dvb_dmxdev_init(&dec->dmxdev, dec->adapter)) < 0) {
+ if ((result = dvb_dmxdev_init(&dec->dmxdev, &dec->adapter)) < 0) {
printk("%s: dvb_dmxdev_init failed: error %d\n",
__FUNCTION__, result);
dvb_dmx_release(&dec->demux);
- dvb_unregister_adapter(dec->adapter);
+ dvb_unregister_adapter(&dec->adapter);
return result;
}
@@ -1463,7 +1463,7 @@
dvb_dmxdev_release(&dec->dmxdev);
dvb_dmx_release(&dec->demux);
- dvb_unregister_adapter(dec->adapter);
+ dvb_unregister_adapter(&dec->adapter);
return result;
}
@@ -1476,12 +1476,12 @@
dec->demux.dmx.remove_frontend(&dec->demux.dmx, &dec->frontend);
dvb_dmxdev_release(&dec->dmxdev);
dvb_dmx_release(&dec->demux);
- dvb_unregister_adapter(dec->adapter);
+ dvb_unregister_adapter(&dec->adapter);
return result;
}
- dvb_net_init(dec->adapter, &dec->dvb_net, &dec->demux.dmx);
+ dvb_net_init(&dec->adapter, &dec->dvb_net, &dec->demux.dmx);
return 0;
}
@@ -1496,7 +1496,7 @@
dvb_dmxdev_release(&dec->dmxdev);
dvb_dmx_release(&dec->demux);
if (dec->fe) dvb_unregister_frontend(dec->fe);
- dvb_unregister_adapter(dec->adapter);
+ dvb_unregister_adapter(&dec->adapter);
}
static void ttusb_dec_exit_rc(struct ttusb_dec *dec)
@@ -1565,15 +1565,15 @@
}
}
-int fe_send_command(struct dvb_frontend* fe, const u8 command,
- int param_length, const u8 params[],
- int *result_length, u8 cmd_result[])
+static int fe_send_command(struct dvb_frontend* fe, const u8 command,
+ int param_length, const u8 params[],
+ int *result_length, u8 cmd_result[])
{
struct ttusb_dec* dec = (struct ttusb_dec*) fe->dvb->priv;
return ttusb_dec_send_command(dec, command, param_length, params, result_length, cmd_result);
}
-struct ttusbdecfe_config fe_config = {
+static struct ttusbdecfe_config fe_config = {
.send_command = fe_send_command
};
@@ -1620,7 +1620,7 @@
}
ttusb_dec_init_dvb(dec);
- dec->adapter->priv = dec;
+ dec->adapter.priv = dec;
switch (le16_to_cpu(id->idProduct)) {
case 0x1006:
dec->fe = ttusbdecfe_dvbs_attach(&fe_config);
@@ -1637,7 +1637,7 @@
le16_to_cpu(dec->udev->descriptor.idVendor),
le16_to_cpu(dec->udev->descriptor.idProduct));
} else {
- if (dvb_register_frontend(dec->adapter, dec->fe)) {
+ if (dvb_register_frontend(&dec->adapter, dec->fe)) {
printk("budget-ci: Frontend registration failed!\n");
if (dec->fe->ops->release)
dec->fe->ops->release(dec->fe);
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index d3dd422..6c05fdd 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -240,6 +240,7 @@
select VIDEO_BUF
select VIDEO_IR
select VIDEO_TUNER
+ select CRC32
---help---
This is a video4linux driver for Philips SAA7130/7134 based
TV cards.
diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bttv-cards.c
index 85224b9..6334122 100644
--- a/drivers/media/video/bttv-cards.c
+++ b/drivers/media/video/bttv-cards.c
@@ -1946,7 +1946,6 @@
.no_tda9875 = 1,
.no_tda7432 = 1,
.tuner_type = TUNER_ABSENT,
- .no_video = 1,
.pll = PLL_28,
},{
.name = "Teppro TEV-560/InterVision IV-560",
diff --git a/drivers/media/video/bttv-i2c.c b/drivers/media/video/bttv-i2c.c
index e3f477d..c2368bc 100644
--- a/drivers/media/video/bttv-i2c.c
+++ b/drivers/media/video/bttv-i2c.c
@@ -363,6 +363,9 @@
/* read EEPROM content */
void __devinit bttv_readee(struct bttv *btv, unsigned char *eedata, int addr)
{
+ memset(eedata, 0, 256);
+ if (0 != btv->i2c_rc)
+ return;
btv->i2c_client.addr = addr >> 1;
tveeprom_read(&btv->i2c_client, eedata, 256);
}
diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c
index fe6abe3..1db0226 100644
--- a/drivers/media/video/saa7134/saa6752hs.c
+++ b/drivers/media/video/saa7134/saa6752hs.c
@@ -43,15 +43,15 @@
static const struct v4l2_format v4l2_format_table[] =
{
[SAA6752HS_VF_D1] = {
- .fmt.pix.width = 720, .fmt.pix.height = 576 },
+ .fmt = { .pix = { .width = 720, .height = 576 }, }, },
[SAA6752HS_VF_2_3_D1] = {
- .fmt.pix.width = 480, .fmt.pix.height = 576 },
+ .fmt = { .pix = { .width = 480, .height = 576 }, }, },
[SAA6752HS_VF_1_2_D1] = {
- .fmt.pix.width = 352, .fmt.pix.height = 576 },
+ .fmt = { .pix = { .width = 352, .height = 576 }, }, },
[SAA6752HS_VF_SIF] = {
- .fmt.pix.width = 352, .fmt.pix.height = 288 },
+ .fmt = { .pix = { .width = 352, .height = 288 }, }, },
[SAA6752HS_VF_UNKNOWN] = {
- .fmt.pix.width = 0, .fmt.pix.height = 0},
+ .fmt = { .pix = { .width = 0, .height = 0 }, }, },
};
struct saa6752hs_state {
diff --git a/drivers/media/video/video-buf-dvb.c b/drivers/media/video/video-buf-dvb.c
index 31cc4ed..5f87007 100644
--- a/drivers/media/video/video-buf-dvb.c
+++ b/drivers/media/video/video-buf-dvb.c
@@ -149,10 +149,10 @@
dvb->name, result);
goto fail_adapter;
}
- dvb->adapter->priv = adapter_priv;
+ dvb->adapter.priv = adapter_priv;
/* register frontend */
- result = dvb_register_frontend(dvb->adapter, dvb->frontend);
+ result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
if (result < 0) {
printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n",
dvb->name, result);
@@ -178,7 +178,7 @@
dvb->dmxdev.filternum = 256;
dvb->dmxdev.demux = &dvb->demux.dmx;
dvb->dmxdev.capabilities = 0;
- result = dvb_dmxdev_init(&dvb->dmxdev, dvb->adapter);
+ result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
if (result < 0) {
printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n",
dvb->name, result);
@@ -209,7 +209,7 @@
}
/* register network adapter */
- dvb_net_init(dvb->adapter, &dvb->net, &dvb->demux.dmx);
+ dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
return 0;
fail_fe_conn:
@@ -223,7 +223,7 @@
fail_dmx:
dvb_unregister_frontend(dvb->frontend);
fail_frontend:
- dvb_unregister_adapter(dvb->adapter);
+ dvb_unregister_adapter(&dvb->adapter);
fail_adapter:
return result;
}
@@ -236,7 +236,7 @@
dvb_dmxdev_release(&dvb->dmxdev);
dvb_dmx_release(&dvb->demux);
dvb_unregister_frontend(dvb->frontend);
- dvb_unregister_adapter(dvb->adapter);
+ dvb_unregister_adapter(&dvb->adapter);
}
EXPORT_SYMBOL(videobuf_dvb_register);
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 2e70d74..4991bbd 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -51,7 +51,7 @@
config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support"
- depends on MMC && ISA && ISA_DMA_API
+ depends on MMC && ISA_DMA_API
help
This selects the Winbond(R) W83L51xD Secure digital and
Multimedia card Interface.
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index b5b4a7b..d4eee99 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -383,7 +383,10 @@
struct mmc_blk_data *md;
int err;
- if (card->csd.cmdclass & ~0x1ff)
+ /*
+ * Check that the card supports the command class(es) we need.
+ */
+ if (!(card->csd.cmdclass & CCC_BLOCK_READ))
return -ENODEV;
if (card->csd.read_blkbits < 9) {
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 3974752..b7fbd30 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -28,7 +28,9 @@
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/pnp.h>
#include <linux/highmem.h>
#include <linux/mmc/host.h>
#include <linux/mmc/protocol.h>
@@ -40,7 +42,7 @@
#include "wbsd.h"
#define DRIVER_NAME "wbsd"
-#define DRIVER_VERSION "1.1"
+#define DRIVER_VERSION "1.2"
#ifdef CONFIG_MMC_DEBUG
#define DBG(x...) \
@@ -52,10 +54,6 @@
#define DBGF(x...) do { } while (0)
#endif
-static unsigned int io = 0x248;
-static unsigned int irq = 6;
-static int dma = 2;
-
#ifdef CONFIG_MMC_DEBUG
void DBG_REG(int reg, u8 value)
{
@@ -79,28 +77,61 @@
#endif
/*
+ * Device resources
+ */
+
+#ifdef CONFIG_PNP
+
+static const struct pnp_device_id pnp_dev_table[] = {
+ { "WEC0517", 0 },
+ { "WEC0518", 0 },
+ { "", 0 },
+};
+
+MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
+
+#endif /* CONFIG_PNP */
+
+#ifdef CONFIG_PNP
+static unsigned int nopnp = 0;
+#else
+static const unsigned int nopnp = 1;
+#endif
+static unsigned int io = 0x248;
+static unsigned int irq = 6;
+static int dma = 2;
+
+/*
* Basic functions
*/
static inline void wbsd_unlock_config(struct wbsd_host* host)
{
+ BUG_ON(host->config == 0);
+
outb(host->unlock_code, host->config);
outb(host->unlock_code, host->config);
}
static inline void wbsd_lock_config(struct wbsd_host* host)
{
+ BUG_ON(host->config == 0);
+
outb(LOCK_CODE, host->config);
}
static inline void wbsd_write_config(struct wbsd_host* host, u8 reg, u8 value)
{
+ BUG_ON(host->config == 0);
+
outb(reg, host->config);
outb(value, host->config + 1);
}
static inline u8 wbsd_read_config(struct wbsd_host* host, u8 reg)
{
+ BUG_ON(host->config == 0);
+
outb(reg, host->config);
return inb(host->config + 1);
}
@@ -133,6 +164,13 @@
wbsd_write_index(host, WBSD_IDX_SETUP, setup);
/*
+ * Set DAT3 to input
+ */
+ setup &= ~WBSD_DAT3_H;
+ wbsd_write_index(host, WBSD_IDX_SETUP, setup);
+ host->flags &= ~WBSD_FIGNORE_DETECT;
+
+ /*
* Read back default clock.
*/
host->clk = wbsd_read_index(host, WBSD_IDX_CLK);
@@ -148,6 +186,14 @@
wbsd_write_index(host, WBSD_IDX_TAAC, 0x7F);
/*
+ * Test for card presence
+ */
+ if (inb(host->base + WBSD_CSR) & WBSD_CARDPRESENT)
+ host->flags |= WBSD_FCARD_PRESENT;
+ else
+ host->flags &= ~WBSD_FCARD_PRESENT;
+
+ /*
* Enable interesting interrupts.
*/
ier = 0;
@@ -407,8 +453,6 @@
}
}
-static irqreturn_t wbsd_irq(int irq, void *dev_id, struct pt_regs *regs);
-
static void wbsd_send_command(struct wbsd_host* host, struct mmc_command* cmd)
{
int i;
@@ -646,6 +690,13 @@
}
wbsd_kunmap_sg(host);
+
+ /*
+ * The controller stops sending interrupts for
+ * 'FIFO empty' under certain conditions. So we
+ * need to be a bit more pro-active.
+ */
+ tasklet_schedule(&host->fifo_tasklet);
}
static void wbsd_prepare_data(struct wbsd_host* host, struct mmc_data* data)
@@ -850,9 +901,11 @@
wbsd_request_end(host, host->mrq);
}
-/*
- * MMC Callbacks
- */
+/*****************************************************************************\
+ * *
+ * MMC layer callbacks *
+ * *
+\*****************************************************************************/
static void wbsd_request(struct mmc_host* mmc, struct mmc_request* mrq)
{
@@ -874,7 +927,7 @@
* If there is no card in the slot then
* timeout immediatly.
*/
- if (!(inb(host->base + WBSD_CSR) & WBSD_CARDPRESENT))
+ if (!(host->flags & WBSD_FCARD_PRESENT))
{
cmd->error = MMC_ERR_TIMEOUT;
goto done;
@@ -953,33 +1006,50 @@
host->clk = clk;
}
+ /*
+ * Power up card.
+ */
if (ios->power_mode != MMC_POWER_OFF)
{
- /*
- * Power up card.
- */
pwr = inb(host->base + WBSD_CSR);
pwr &= ~WBSD_POWER_N;
outb(pwr, host->base + WBSD_CSR);
-
- /*
- * This behaviour is stolen from the
- * Windows driver. Don't know why, but
- * it is needed.
- */
- setup = wbsd_read_index(host, WBSD_IDX_SETUP);
- if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
- setup |= WBSD_DAT3_H;
- else
- setup &= ~WBSD_DAT3_H;
- wbsd_write_index(host, WBSD_IDX_SETUP, setup);
-
- mdelay(1);
}
+ /*
+ * MMC cards need to have pin 1 high during init.
+ * Init time corresponds rather nicely with the bus mode.
+ * It wreaks havoc with the card detection though so
+ * that needs to be disabed.
+ */
+ setup = wbsd_read_index(host, WBSD_IDX_SETUP);
+ if ((ios->power_mode == MMC_POWER_ON) &&
+ (ios->bus_mode == MMC_BUSMODE_OPENDRAIN))
+ {
+ setup |= WBSD_DAT3_H;
+ host->flags |= WBSD_FIGNORE_DETECT;
+ }
+ else
+ {
+ setup &= ~WBSD_DAT3_H;
+ host->flags &= ~WBSD_FIGNORE_DETECT;
+ }
+ wbsd_write_index(host, WBSD_IDX_SETUP, setup);
+
spin_unlock_bh(&host->lock);
}
+static struct mmc_host_ops wbsd_ops = {
+ .request = wbsd_request,
+ .set_ios = wbsd_set_ios,
+};
+
+/*****************************************************************************\
+ * *
+ * Interrupt handling *
+ * *
+\*****************************************************************************/
+
/*
* Tasklets
*/
@@ -1005,17 +1075,33 @@
{
struct wbsd_host* host = (struct wbsd_host*)param;
u8 csr;
+ int change = 0;
spin_lock(&host->lock);
+ if (host->flags & WBSD_FIGNORE_DETECT)
+ {
+ spin_unlock(&host->lock);
+ return;
+ }
+
csr = inb(host->base + WBSD_CSR);
WARN_ON(csr == 0xff);
if (csr & WBSD_CARDPRESENT)
- DBG("Card inserted\n");
- else
+ {
+ if (!(host->flags & WBSD_FCARD_PRESENT))
+ {
+ DBG("Card inserted\n");
+ host->flags |= WBSD_FCARD_PRESENT;
+ change = 1;
+ }
+ }
+ else if (host->flags & WBSD_FCARD_PRESENT)
{
DBG("Card removed\n");
+ host->flags &= ~WBSD_FCARD_PRESENT;
+ change = 1;
if (host->mrq)
{
@@ -1033,7 +1119,8 @@
*/
spin_unlock(&host->lock);
- mmc_detect_change(host->mmc);
+ if (change)
+ mmc_detect_change(host->mmc);
}
static void wbsd_tasklet_fifo(unsigned long param)
@@ -1200,11 +1287,85 @@
return IRQ_HANDLED;
}
+/*****************************************************************************\
+ * *
+ * Device initialisation and shutdown *
+ * *
+\*****************************************************************************/
+
/*
- * Support functions for probe
+ * Allocate/free MMC structure.
*/
-static int wbsd_scan(struct wbsd_host* host)
+static int __devinit wbsd_alloc_mmc(struct device* dev)
+{
+ struct mmc_host* mmc;
+ struct wbsd_host* host;
+
+ /*
+ * Allocate MMC structure.
+ */
+ mmc = mmc_alloc_host(sizeof(struct wbsd_host), dev);
+ if (!mmc)
+ return -ENOMEM;
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+
+ host->dma = -1;
+
+ /*
+ * Set host parameters.
+ */
+ mmc->ops = &wbsd_ops;
+ mmc->f_min = 375000;
+ mmc->f_max = 24000000;
+ mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
+
+ spin_lock_init(&host->lock);
+
+ /*
+ * Maximum number of segments. Worst case is one sector per segment
+ * so this will be 64kB/512.
+ */
+ mmc->max_hw_segs = 128;
+ mmc->max_phys_segs = 128;
+
+ /*
+ * Maximum number of sectors in one transfer. Also limited by 64kB
+ * buffer.
+ */
+ mmc->max_sectors = 128;
+
+ /*
+ * Maximum segment size. Could be one segment with the maximum number
+ * of segments.
+ */
+ mmc->max_seg_size = mmc->max_sectors * 512;
+
+ dev_set_drvdata(dev, mmc);
+
+ return 0;
+}
+
+static void __devexit wbsd_free_mmc(struct device* dev)
+{
+ struct mmc_host* mmc;
+
+ mmc = dev_get_drvdata(dev);
+ if (!mmc)
+ return;
+
+ mmc_free_host(mmc);
+
+ dev_set_drvdata(dev, NULL);
+}
+
+/*
+ * Scan for known chip id:s
+ */
+
+static int __devinit wbsd_scan(struct wbsd_host* host)
{
int i, j, k;
int id;
@@ -1258,12 +1419,16 @@
return -ENODEV;
}
-static int wbsd_request_regions(struct wbsd_host* host)
+/*
+ * Allocate/free io port ranges
+ */
+
+static int __devinit wbsd_request_region(struct wbsd_host* host, int base)
{
if (io & 0x7)
return -EINVAL;
- if (!request_region(io, 8, DRIVER_NAME))
+ if (!request_region(base, 8, DRIVER_NAME))
return -EIO;
host->base = io;
@@ -1271,19 +1436,25 @@
return 0;
}
-static void wbsd_release_regions(struct wbsd_host* host)
+static void __devexit wbsd_release_regions(struct wbsd_host* host)
{
if (host->base)
release_region(host->base, 8);
+
+ host->base = 0;
if (host->config)
release_region(host->config, 2);
+
+ host->config = 0;
}
-static void wbsd_init_dma(struct wbsd_host* host)
+/*
+ * Allocate/free DMA port and buffer
+ */
+
+static void __devinit wbsd_request_dma(struct wbsd_host* host, int dma)
{
- host->dma = -1;
-
if (dma < 0)
return;
@@ -1294,7 +1465,7 @@
* We need to allocate a special buffer in
* order for ISA to be able to DMA to it.
*/
- host->dma_buffer = kmalloc(65536,
+ host->dma_buffer = kmalloc(WBSD_DMA_SIZE,
GFP_NOIO | GFP_DMA | __GFP_REPEAT | __GFP_NOWARN);
if (!host->dma_buffer)
goto free;
@@ -1302,7 +1473,8 @@
/*
* Translate the address to a physical address.
*/
- host->dma_addr = isa_virt_to_bus(host->dma_buffer);
+ host->dma_addr = dma_map_single(host->mmc->dev, host->dma_buffer,
+ WBSD_DMA_SIZE, DMA_BIDIRECTIONAL);
/*
* ISA DMA must be aligned on a 64k basis.
@@ -1325,6 +1497,10 @@
*/
BUG_ON(1);
+ dma_unmap_single(host->mmc->dev, host->dma_addr, WBSD_DMA_SIZE,
+ DMA_BIDIRECTIONAL);
+ host->dma_addr = (dma_addr_t)NULL;
+
kfree(host->dma_buffer);
host->dma_buffer = NULL;
@@ -1336,86 +1512,39 @@
"Falling back on FIFO.\n", dma);
}
-static struct mmc_host_ops wbsd_ops = {
- .request = wbsd_request,
- .set_ios = wbsd_set_ios,
-};
+static void __devexit wbsd_release_dma(struct wbsd_host* host)
+{
+ if (host->dma_addr)
+ dma_unmap_single(host->mmc->dev, host->dma_addr, WBSD_DMA_SIZE,
+ DMA_BIDIRECTIONAL);
+ if (host->dma_buffer)
+ kfree(host->dma_buffer);
+ if (host->dma >= 0)
+ free_dma(host->dma);
+
+ host->dma = -1;
+ host->dma_buffer = NULL;
+ host->dma_addr = (dma_addr_t)NULL;
+}
/*
- * Device probe
+ * Allocate/free IRQ.
*/
-static int wbsd_probe(struct device* dev)
+static int __devinit wbsd_request_irq(struct wbsd_host* host, int irq)
{
- struct wbsd_host* host = NULL;
- struct mmc_host* mmc = NULL;
int ret;
/*
- * Allocate MMC structure.
- */
- mmc = mmc_alloc_host(sizeof(struct wbsd_host), dev);
- if (!mmc)
- return -ENOMEM;
-
- host = mmc_priv(mmc);
- host->mmc = mmc;
-
- /*
- * Scan for hardware.
- */
- ret = wbsd_scan(host);
- if (ret)
- goto freemmc;
-
- /*
- * Reset the chip.
- */
- wbsd_write_config(host, WBSD_CONF_SWRST, 1);
- wbsd_write_config(host, WBSD_CONF_SWRST, 0);
-
- /*
- * Allocate I/O ports.
- */
- ret = wbsd_request_regions(host);
- if (ret)
- goto release;
-
- /*
- * Set host parameters.
- */
- mmc->ops = &wbsd_ops;
- mmc->f_min = 375000;
- mmc->f_max = 24000000;
- mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
-
- spin_lock_init(&host->lock);
-
- /*
- * Select SD/MMC function.
- */
- wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD);
-
- /*
- * Set up card detection.
- */
- wbsd_write_config(host, WBSD_CONF_PINS, 0x02);
-
- /*
- * Configure I/O port.
- */
- wbsd_write_config(host, WBSD_CONF_PORT_HI, host->base >> 8);
- wbsd_write_config(host, WBSD_CONF_PORT_LO, host->base & 0xff);
-
- /*
* Allocate interrupt.
*/
+
ret = request_irq(irq, wbsd_irq, SA_SHIRQ, DRIVER_NAME, host);
if (ret)
- goto release;
+ return ret;
host->irq = irq;
-
+
/*
* Set up tasklets.
*/
@@ -1426,138 +1555,323 @@
tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish, (unsigned long)host);
tasklet_init(&host->block_tasklet, wbsd_tasklet_block, (unsigned long)host);
- /*
- * Configure interrupt.
- */
- wbsd_write_config(host, WBSD_CONF_IRQ, host->irq);
-
- /*
- * Allocate DMA.
- */
- wbsd_init_dma(host);
-
- /*
- * If all went well, then configure DMA.
- */
- if (host->dma >= 0)
- wbsd_write_config(host, WBSD_CONF_DRQ, host->dma);
-
- /*
- * Maximum number of segments. Worst case is one sector per segment
- * so this will be 64kB/512.
- */
- mmc->max_hw_segs = 128;
- mmc->max_phys_segs = 128;
-
- /*
- * Maximum number of sectors in one transfer. Also limited by 64kB
- * buffer.
- */
- mmc->max_sectors = 128;
-
- /*
- * Maximum segment size. Could be one segment with the maximum number
- * of segments.
- */
- mmc->max_seg_size = mmc->max_sectors * 512;
-
- /*
- * Enable chip.
- */
- wbsd_write_config(host, WBSD_CONF_ENABLE, 1);
-
- /*
- * Power up chip.
- */
- wbsd_write_config(host, WBSD_CONF_POWER, 0x20);
-
- /*
- * Power Management stuff. No idea how this works.
- * Not tested.
- */
-#ifdef CONFIG_PM
- wbsd_write_config(host, WBSD_CONF_PME, 0xA0);
-#endif
-
- /*
- * Reset the chip into a known state.
- */
- wbsd_init_device(host);
-
- dev_set_drvdata(dev, mmc);
-
- /*
- * Add host to MMC layer.
- */
- mmc_add_host(mmc);
-
- printk(KERN_INFO "%s: W83L51xD id %x at 0x%x irq %d dma %d\n",
- mmc->host_name, (int)host->chip_id, (int)host->base,
- (int)host->irq, (int)host->dma);
-
return 0;
-
-release:
- wbsd_release_regions(host);
-
-freemmc:
- mmc_free_host(mmc);
-
- return ret;
}
-/*
- * Device remove
- */
-
-static int wbsd_remove(struct device* dev)
+static void __devexit wbsd_release_irq(struct wbsd_host* host)
{
- struct mmc_host* mmc = dev_get_drvdata(dev);
- struct wbsd_host* host;
-
- if (!mmc)
- return 0;
-
- host = mmc_priv(mmc);
-
- /*
- * Unregister host with MMC layer.
- */
- mmc_remove_host(mmc);
-
- /*
- * Power down the SD/MMC function.
- */
- wbsd_unlock_config(host);
- wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD);
- wbsd_write_config(host, WBSD_CONF_ENABLE, 0);
- wbsd_lock_config(host);
-
- /*
- * Free resources.
- */
- if (host->dma_buffer)
- kfree(host->dma_buffer);
-
- if (host->dma >= 0)
- free_dma(host->dma);
+ if (!host->irq)
+ return;
free_irq(host->irq, host);
+ host->irq = 0;
+
tasklet_kill(&host->card_tasklet);
tasklet_kill(&host->fifo_tasklet);
tasklet_kill(&host->crc_tasklet);
tasklet_kill(&host->timeout_tasklet);
tasklet_kill(&host->finish_tasklet);
tasklet_kill(&host->block_tasklet);
+}
+
+/*
+ * Allocate all resources for the host.
+ */
+
+static int __devinit wbsd_request_resources(struct wbsd_host* host,
+ int base, int irq, int dma)
+{
+ int ret;
+ /*
+ * Allocate I/O ports.
+ */
+ ret = wbsd_request_region(host, base);
+ if (ret)
+ return ret;
+
+ /*
+ * Allocate interrupt.
+ */
+ ret = wbsd_request_irq(host, irq);
+ if (ret)
+ return ret;
+
+ /*
+ * Allocate DMA.
+ */
+ wbsd_request_dma(host, dma);
+
+ return 0;
+}
+
+/*
+ * Release all resources for the host.
+ */
+
+static void __devexit wbsd_release_resources(struct wbsd_host* host)
+{
+ wbsd_release_dma(host);
+ wbsd_release_irq(host);
wbsd_release_regions(host);
+}
+
+/*
+ * Configure the resources the chip should use.
+ */
+
+static void __devinit wbsd_chip_config(struct wbsd_host* host)
+{
+ /*
+ * Reset the chip.
+ */
+ wbsd_write_config(host, WBSD_CONF_SWRST, 1);
+ wbsd_write_config(host, WBSD_CONF_SWRST, 0);
+
+ /*
+ * Select SD/MMC function.
+ */
+ wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD);
- mmc_free_host(mmc);
+ /*
+ * Set up card detection.
+ */
+ wbsd_write_config(host, WBSD_CONF_PINS, WBSD_PINS_DETECT_GP11);
+
+ /*
+ * Configure chip
+ */
+ wbsd_write_config(host, WBSD_CONF_PORT_HI, host->base >> 8);
+ wbsd_write_config(host, WBSD_CONF_PORT_LO, host->base & 0xff);
+
+ wbsd_write_config(host, WBSD_CONF_IRQ, host->irq);
+
+ if (host->dma >= 0)
+ wbsd_write_config(host, WBSD_CONF_DRQ, host->dma);
+
+ /*
+ * Enable and power up chip.
+ */
+ wbsd_write_config(host, WBSD_CONF_ENABLE, 1);
+ wbsd_write_config(host, WBSD_CONF_POWER, 0x20);
+}
+
+/*
+ * Check that configured resources are correct.
+ */
+
+static int __devinit wbsd_chip_validate(struct wbsd_host* host)
+{
+ int base, irq, dma;
+
+ /*
+ * Select SD/MMC function.
+ */
+ wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD);
+
+ /*
+ * Read configuration.
+ */
+ base = wbsd_read_config(host, WBSD_CONF_PORT_HI) << 8;
+ base |= wbsd_read_config(host, WBSD_CONF_PORT_LO);
+
+ irq = wbsd_read_config(host, WBSD_CONF_IRQ);
+
+ dma = wbsd_read_config(host, WBSD_CONF_DRQ);
+
+ /*
+ * Validate against given configuration.
+ */
+ if (base != host->base)
+ return 0;
+ if (irq != host->irq)
+ return 0;
+ if ((dma != host->dma) && (host->dma != -1))
+ return 0;
+
+ return 1;
+}
+
+/*****************************************************************************\
+ * *
+ * Devices setup and shutdown *
+ * *
+\*****************************************************************************/
+
+static int __devinit wbsd_init(struct device* dev, int base, int irq, int dma,
+ int pnp)
+{
+ struct wbsd_host* host = NULL;
+ struct mmc_host* mmc = NULL;
+ int ret;
+
+ ret = wbsd_alloc_mmc(dev);
+ if (ret)
+ return ret;
+
+ mmc = dev_get_drvdata(dev);
+ host = mmc_priv(mmc);
+
+ /*
+ * Scan for hardware.
+ */
+ ret = wbsd_scan(host);
+ if (ret)
+ {
+ if (pnp && (ret == -ENODEV))
+ {
+ printk(KERN_WARNING DRIVER_NAME
+ ": Unable to confirm device presence. You may "
+ "experience lock-ups.\n");
+ }
+ else
+ {
+ wbsd_free_mmc(dev);
+ return ret;
+ }
+ }
+
+ /*
+ * Request resources.
+ */
+ ret = wbsd_request_resources(host, io, irq, dma);
+ if (ret)
+ {
+ wbsd_release_resources(host);
+ wbsd_free_mmc(dev);
+ return ret;
+ }
+
+ /*
+ * See if chip needs to be configured.
+ */
+ if (pnp && (host->config != 0))
+ {
+ if (!wbsd_chip_validate(host))
+ {
+ printk(KERN_WARNING DRIVER_NAME
+ ": PnP active but chip not configured! "
+ "You probably have a buggy BIOS. "
+ "Configuring chip manually.\n");
+ wbsd_chip_config(host);
+ }
+ }
+ else
+ wbsd_chip_config(host);
+
+ /*
+ * Power Management stuff. No idea how this works.
+ * Not tested.
+ */
+#ifdef CONFIG_PM
+ if (host->config)
+ wbsd_write_config(host, WBSD_CONF_PME, 0xA0);
+#endif
+ /*
+ * Allow device to initialise itself properly.
+ */
+ mdelay(5);
+
+ /*
+ * Reset the chip into a known state.
+ */
+ wbsd_init_device(host);
+
+ mmc_add_host(mmc);
+
+ printk(KERN_INFO "%s: W83L51xD", mmc->host_name);
+ if (host->chip_id != 0)
+ printk(" id %x", (int)host->chip_id);
+ printk(" at 0x%x irq %d", (int)host->base, (int)host->irq);
+ if (host->dma >= 0)
+ printk(" dma %d", (int)host->dma);
+ else
+ printk(" FIFO");
+ if (pnp)
+ printk(" PnP");
+ printk("\n");
return 0;
}
+static void __devexit wbsd_shutdown(struct device* dev, int pnp)
+{
+ struct mmc_host* mmc = dev_get_drvdata(dev);
+ struct wbsd_host* host;
+
+ if (!mmc)
+ return;
+
+ host = mmc_priv(mmc);
+
+ mmc_remove_host(mmc);
+
+ if (!pnp)
+ {
+ /*
+ * Power down the SD/MMC function.
+ */
+ wbsd_unlock_config(host);
+ wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD);
+ wbsd_write_config(host, WBSD_CONF_ENABLE, 0);
+ wbsd_lock_config(host);
+ }
+
+ wbsd_release_resources(host);
+
+ wbsd_free_mmc(dev);
+}
+
+/*
+ * Non-PnP
+ */
+
+static int __devinit wbsd_probe(struct device* dev)
+{
+ return wbsd_init(dev, io, irq, dma, 0);
+}
+
+static int __devexit wbsd_remove(struct device* dev)
+{
+ wbsd_shutdown(dev, 0);
+
+ return 0;
+}
+
+/*
+ * PnP
+ */
+
+#ifdef CONFIG_PNP
+
+static int __devinit
+wbsd_pnp_probe(struct pnp_dev * pnpdev, const struct pnp_device_id *dev_id)
+{
+ int io, irq, dma;
+
+ /*
+ * Get resources from PnP layer.
+ */
+ io = pnp_port_start(pnpdev, 0);
+ irq = pnp_irq(pnpdev, 0);
+ if (pnp_dma_valid(pnpdev, 0))
+ dma = pnp_dma(pnpdev, 0);
+ else
+ dma = -1;
+
+ DBGF("PnP resources: port %3x irq %d dma %d\n", io, irq, dma);
+
+ return wbsd_init(&pnpdev->dev, io, irq, dma, 1);
+}
+
+static void __devexit wbsd_pnp_remove(struct pnp_dev * dev)
+{
+ wbsd_shutdown(&dev->dev, 1);
+}
+
+#endif /* CONFIG_PNP */
+
/*
* Power management
*/
@@ -1581,17 +1895,7 @@
#define wbsd_resume NULL
#endif
-static void wbsd_release(struct device *dev)
-{
-}
-
-static struct platform_device wbsd_device = {
- .name = DRIVER_NAME,
- .id = -1,
- .dev = {
- .release = wbsd_release,
- },
-};
+static struct platform_device *wbsd_device;
static struct device_driver wbsd_driver = {
.name = DRIVER_NAME,
@@ -1603,6 +1907,17 @@
.resume = wbsd_resume,
};
+#ifdef CONFIG_PNP
+
+static struct pnp_driver wbsd_pnp_driver = {
+ .name = DRIVER_NAME,
+ .id_table = pnp_dev_table,
+ .probe = wbsd_pnp_probe,
+ .remove = wbsd_pnp_remove,
+};
+
+#endif /* CONFIG_PNP */
+
/*
* Module loading/unloading
*/
@@ -1615,29 +1930,57 @@
": Winbond W83L51xD SD/MMC card interface driver, "
DRIVER_VERSION "\n");
printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
-
- result = driver_register(&wbsd_driver);
- if (result < 0)
- return result;
- result = platform_device_register(&wbsd_device);
- if (result < 0)
- return result;
+#ifdef CONFIG_PNP
+
+ if (!nopnp)
+ {
+ result = pnp_register_driver(&wbsd_pnp_driver);
+ if (result < 0)
+ return result;
+ }
+
+#endif /* CONFIG_PNP */
+
+ if (nopnp)
+ {
+ result = driver_register(&wbsd_driver);
+ if (result < 0)
+ return result;
+
+ wbsd_device = platform_device_register_simple(DRIVER_NAME, -1,
+ NULL, 0);
+ if (IS_ERR(wbsd_device))
+ return PTR_ERR(wbsd_device);
+ }
return 0;
}
static void __exit wbsd_drv_exit(void)
{
- platform_device_unregister(&wbsd_device);
+#ifdef CONFIG_PNP
+
+ if (!nopnp)
+ pnp_unregister_driver(&wbsd_pnp_driver);
- driver_unregister(&wbsd_driver);
+#endif /* CONFIG_PNP */
+
+ if (nopnp)
+ {
+ platform_device_unregister(wbsd_device);
+
+ driver_unregister(&wbsd_driver);
+ }
DBG("unloaded\n");
}
module_init(wbsd_drv_init);
module_exit(wbsd_drv_exit);
+#ifdef CONFIG_PNP
+module_param(nopnp, uint, 0444);
+#endif
module_param(io, uint, 0444);
module_param(irq, uint, 0444);
module_param(dma, int, 0444);
@@ -1646,6 +1989,9 @@
MODULE_DESCRIPTION("Winbond W83L51xD SD/MMC card interface driver");
MODULE_VERSION(DRIVER_VERSION);
+#ifdef CONFIG_PNP
+MODULE_PARM_DESC(nopnp, "Scan for device instead of relying on PNP. (default 0)");
+#endif
MODULE_PARM_DESC(io, "I/O base to allocate. Must be 8 byte aligned. (default 0x248)");
MODULE_PARM_DESC(irq, "IRQ to allocate. (default 6)");
MODULE_PARM_DESC(dma, "DMA channel to allocate. -1 for no DMA. (default 2)");
diff --git a/drivers/mmc/wbsd.h b/drivers/mmc/wbsd.h
index fdc03b5..864f3082 100644
--- a/drivers/mmc/wbsd.h
+++ b/drivers/mmc/wbsd.h
@@ -35,6 +35,12 @@
#define DEVICE_SD 0x03
+#define WBSD_PINS_DAT3_HI 0x20
+#define WBSD_PINS_DAT3_OUT 0x10
+#define WBSD_PINS_GP11_HI 0x04
+#define WBSD_PINS_DETECT_GP11 0x02
+#define WBSD_PINS_DETECT_DAT3 0x01
+
#define WBSD_CMDR 0x00
#define WBSD_DFR 0x01
#define WBSD_EIR 0x02
@@ -133,6 +139,7 @@
#define WBSD_CRC_OK 0x05 /* S010E (00101) */
#define WBSD_CRC_FAIL 0x0B /* S101E (01011) */
+#define WBSD_DMA_SIZE 65536
struct wbsd_host
{
@@ -140,6 +147,11 @@
spinlock_t lock; /* Mutex */
+ int flags; /* Driver states */
+
+#define WBSD_FCARD_PRESENT (1<<0) /* Card is present */
+#define WBSD_FIGNORE_DETECT (1<<1) /* Ignore card detection */
+
struct mmc_request* mrq; /* Current request */
u8 isr; /* Accumulated ISR */
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index d639cb8..72cdf19 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -54,6 +54,7 @@
#include <linux/config.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/netdevice.h>
@@ -91,16 +92,17 @@
MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
MODULE_DESCRIPTION("RealTek RTL-8139C+ series 10/100 PCI Ethernet driver");
+MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
static int debug = -1;
-MODULE_PARM (debug, "i");
+module_param(debug, int, 0);
MODULE_PARM_DESC (debug, "8139cp: bitmapped message enable number");
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
The RTL chips use a 64 element hash table based on the Ethernet CRC. */
static int multicast_filter_limit = 32;
-MODULE_PARM (multicast_filter_limit, "i");
+module_param(multicast_filter_limit, int, 0);
MODULE_PARM_DESC (multicast_filter_limit, "8139cp: maximum number of filtered multicast addresses");
#define PFX DRV_NAME ": "
@@ -186,6 +188,9 @@
RingEnd = (1 << 30), /* End of descriptor ring */
FirstFrag = (1 << 29), /* First segment of a packet */
LastFrag = (1 << 28), /* Final segment of a packet */
+ LargeSend = (1 << 27), /* TCP Large Send Offload (TSO) */
+ MSSShift = 16, /* MSS value position */
+ MSSMask = 0xfff, /* MSS value: 11 bits */
TxError = (1 << 23), /* Tx error summary */
RxError = (1 << 20), /* Rx error summary */
IPCS = (1 << 18), /* Calculate IP checksum */
@@ -312,7 +317,7 @@
struct ring_info {
struct sk_buff *skb;
dma_addr_t mapping;
- unsigned frag;
+ u32 len;
};
struct cp_dma_stats {
@@ -394,6 +399,9 @@
static void __cp_set_rx_mode (struct net_device *dev);
static void cp_tx (struct cp_private *cp);
static void cp_clean_rings (struct cp_private *cp);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void cp_poll_controller(struct net_device *dev);
+#endif
static struct pci_device_id cp_pci_tbl[] = {
{ PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139,
@@ -688,6 +696,19 @@
return IRQ_HANDLED;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void cp_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ cp_interrupt(dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
+
static void cp_tx (struct cp_private *cp)
{
unsigned tx_head = cp->tx_head;
@@ -707,7 +728,7 @@
BUG();
pci_unmap_single(cp->pdev, cp->tx_skb[tx_tail].mapping,
- skb->len, PCI_DMA_TODEVICE);
+ cp->tx_skb[tx_tail].len, PCI_DMA_TODEVICE);
if (status & LastFrag) {
if (status & (TxError | TxFIFOUnder)) {
@@ -749,10 +770,11 @@
{
struct cp_private *cp = netdev_priv(dev);
unsigned entry;
- u32 eor;
+ u32 eor, flags;
#if CP_VLAN_TAG_USED
u32 vlan_tag = 0;
#endif
+ int mss = 0;
spin_lock_irq(&cp->lock);
@@ -772,6 +794,9 @@
entry = cp->tx_head;
eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
+ if (dev->features & NETIF_F_TSO)
+ mss = skb_shinfo(skb)->tso_size;
+
if (skb_shinfo(skb)->nr_frags == 0) {
struct cp_desc *txd = &cp->tx_ring[entry];
u32 len;
@@ -783,26 +808,26 @@
txd->addr = cpu_to_le64(mapping);
wmb();
- if (skb->ip_summed == CHECKSUM_HW) {
+ flags = eor | len | DescOwn | FirstFrag | LastFrag;
+
+ if (mss)
+ flags |= LargeSend | ((mss & MSSMask) << MSSShift);
+ else if (skb->ip_summed == CHECKSUM_HW) {
const struct iphdr *ip = skb->nh.iph;
if (ip->protocol == IPPROTO_TCP)
- txd->opts1 = cpu_to_le32(eor | len | DescOwn |
- FirstFrag | LastFrag |
- IPCS | TCPCS);
+ flags |= IPCS | TCPCS;
else if (ip->protocol == IPPROTO_UDP)
- txd->opts1 = cpu_to_le32(eor | len | DescOwn |
- FirstFrag | LastFrag |
- IPCS | UDPCS);
+ flags |= IPCS | UDPCS;
else
- BUG();
- } else
- txd->opts1 = cpu_to_le32(eor | len | DescOwn |
- FirstFrag | LastFrag);
+ WARN_ON(1); /* we need a WARN() */
+ }
+
+ txd->opts1 = cpu_to_le32(flags);
wmb();
cp->tx_skb[entry].skb = skb;
cp->tx_skb[entry].mapping = mapping;
- cp->tx_skb[entry].frag = 0;
+ cp->tx_skb[entry].len = len;
entry = NEXT_TX(entry);
} else {
struct cp_desc *txd;
@@ -820,7 +845,7 @@
first_len, PCI_DMA_TODEVICE);
cp->tx_skb[entry].skb = skb;
cp->tx_skb[entry].mapping = first_mapping;
- cp->tx_skb[entry].frag = 1;
+ cp->tx_skb[entry].len = first_len;
entry = NEXT_TX(entry);
for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
@@ -836,16 +861,19 @@
len, PCI_DMA_TODEVICE);
eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
- if (skb->ip_summed == CHECKSUM_HW) {
- ctrl = eor | len | DescOwn | IPCS;
+ ctrl = eor | len | DescOwn;
+
+ if (mss)
+ ctrl |= LargeSend |
+ ((mss & MSSMask) << MSSShift);
+ else if (skb->ip_summed == CHECKSUM_HW) {
if (ip->protocol == IPPROTO_TCP)
- ctrl |= TCPCS;
+ ctrl |= IPCS | TCPCS;
else if (ip->protocol == IPPROTO_UDP)
- ctrl |= UDPCS;
+ ctrl |= IPCS | UDPCS;
else
BUG();
- } else
- ctrl = eor | len | DescOwn;
+ }
if (frag == skb_shinfo(skb)->nr_frags - 1)
ctrl |= LastFrag;
@@ -860,7 +888,7 @@
cp->tx_skb[entry].skb = skb;
cp->tx_skb[entry].mapping = mapping;
- cp->tx_skb[entry].frag = frag + 2;
+ cp->tx_skb[entry].len = len;
entry = NEXT_TX(entry);
}
@@ -1074,7 +1102,6 @@
cp->rx_skb[i].mapping = pci_map_single(cp->pdev,
skb->tail, cp->rx_buf_sz, PCI_DMA_FROMDEVICE);
cp->rx_skb[i].skb = skb;
- cp->rx_skb[i].frag = 0;
cp->rx_ring[i].opts2 = 0;
cp->rx_ring[i].addr = cpu_to_le64(cp->rx_skb[i].mapping);
@@ -1126,9 +1153,6 @@
{
unsigned i;
- memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE);
- memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
-
for (i = 0; i < CP_RX_RING_SIZE; i++) {
if (cp->rx_skb[i].skb) {
pci_unmap_single(cp->pdev, cp->rx_skb[i].mapping,
@@ -1140,13 +1164,18 @@
for (i = 0; i < CP_TX_RING_SIZE; i++) {
if (cp->tx_skb[i].skb) {
struct sk_buff *skb = cp->tx_skb[i].skb;
+
pci_unmap_single(cp->pdev, cp->tx_skb[i].mapping,
- skb->len, PCI_DMA_TODEVICE);
- dev_kfree_skb(skb);
+ cp->tx_skb[i].len, PCI_DMA_TODEVICE);
+ if (le32_to_cpu(cp->tx_ring[i].opts1) & LastFrag)
+ dev_kfree_skb(skb);
cp->net_stats.tx_dropped++;
}
}
+ memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE);
+ memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
+
memset(&cp->rx_skb, 0, sizeof(struct ring_info) * CP_RX_RING_SIZE);
memset(&cp->tx_skb, 0, sizeof(struct ring_info) * CP_TX_RING_SIZE);
}
@@ -1538,6 +1567,8 @@
.set_tx_csum = ethtool_op_set_tx_csum, /* local! */
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = ethtool_op_set_tso,
.get_regs = cp_get_regs,
.get_wol = cp_get_wol,
.set_wol = cp_set_wol,
@@ -1749,6 +1780,9 @@
dev->get_stats = cp_get_stats;
dev->do_ioctl = cp_ioctl;
dev->poll = cp_rx_poll;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = cp_poll_controller;
+#endif
dev->weight = 16; /* arbitrary? from NAPI_HOWTO.txt. */
#ifdef BROKEN
dev->change_mtu = cp_change_mtu;
@@ -1768,6 +1802,10 @@
if (pci_using_dac)
dev->features |= NETIF_F_HIGHDMA;
+#if 0 /* disabled by default until verified */
+ dev->features |= NETIF_F_TSO;
+#endif
+
dev->irq = pdev->irq;
rc = register_netdev(dev);
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index d4bd20c..047202c 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -569,7 +569,7 @@
};
struct rtl8139_private {
- void *mmio_addr;
+ void __iomem *mmio_addr;
int drv_flags;
struct pci_dev *pci_dev;
u32 msg_enable;
@@ -614,7 +614,7 @@
MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
-static int read_eeprom (void *ioaddr, int location, int addr_len);
+static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
static int rtl8139_open (struct net_device *dev);
static int mdio_read (struct net_device *dev, int phy_id, int location);
static void mdio_write (struct net_device *dev, int phy_id, int location,
@@ -638,46 +638,20 @@
static void rtl8139_hw_start (struct net_device *dev);
static struct ethtool_ops rtl8139_ethtool_ops;
-#ifdef USE_IO_OPS
-
-#define RTL_R8(reg) inb (((unsigned long)ioaddr) + (reg))
-#define RTL_R16(reg) inw (((unsigned long)ioaddr) + (reg))
-#define RTL_R32(reg) ((unsigned long) inl (((unsigned long)ioaddr) + (reg)))
-#define RTL_W8(reg, val8) outb ((val8), ((unsigned long)ioaddr) + (reg))
-#define RTL_W16(reg, val16) outw ((val16), ((unsigned long)ioaddr) + (reg))
-#define RTL_W32(reg, val32) outl ((val32), ((unsigned long)ioaddr) + (reg))
-#define RTL_W8_F RTL_W8
-#define RTL_W16_F RTL_W16
-#define RTL_W32_F RTL_W32
-#undef readb
-#undef readw
-#undef readl
-#undef writeb
-#undef writew
-#undef writel
-#define readb(addr) inb((unsigned long)(addr))
-#define readw(addr) inw((unsigned long)(addr))
-#define readl(addr) inl((unsigned long)(addr))
-#define writeb(val,addr) outb((val),(unsigned long)(addr))
-#define writew(val,addr) outw((val),(unsigned long)(addr))
-#define writel(val,addr) outl((val),(unsigned long)(addr))
-
-#else
-
/* write MMIO register, with flush */
/* Flush avoids rtl8139 bug w/ posted MMIO writes */
-#define RTL_W8_F(reg, val8) do { writeb ((val8), ioaddr + (reg)); readb (ioaddr + (reg)); } while (0)
-#define RTL_W16_F(reg, val16) do { writew ((val16), ioaddr + (reg)); readw (ioaddr + (reg)); } while (0)
-#define RTL_W32_F(reg, val32) do { writel ((val32), ioaddr + (reg)); readl (ioaddr + (reg)); } while (0)
+#define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
+#define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
+#define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
#define MMIO_FLUSH_AUDIT_COMPLETE 1
#if MMIO_FLUSH_AUDIT_COMPLETE
/* write MMIO register */
-#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg))
-#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg))
-#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg))
+#define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg))
#else
@@ -689,11 +663,9 @@
#endif /* MMIO_FLUSH_AUDIT_COMPLETE */
/* read MMIO register */
-#define RTL_R8(reg) readb (ioaddr + (reg))
-#define RTL_R16(reg) readw (ioaddr + (reg))
-#define RTL_R32(reg) ((unsigned long) readl (ioaddr + (reg)))
-
-#endif /* USE_IO_OPS */
+#define RTL_R8(reg) ioread8 (ioaddr + (reg))
+#define RTL_R16(reg) ioread16 (ioaddr + (reg))
+#define RTL_R32(reg) ((unsigned long) ioread32 (ioaddr + (reg)))
static const u16 rtl8139_intr_mask =
@@ -740,10 +712,13 @@
assert (tp->pci_dev != NULL);
pdev = tp->pci_dev;
-#ifndef USE_IO_OPS
+#ifdef USE_IO_OPS
if (tp->mmio_addr)
- iounmap (tp->mmio_addr);
-#endif /* !USE_IO_OPS */
+ ioport_unmap (tp->mmio_addr);
+#else
+ if (tp->mmio_addr)
+ pci_iounmap (pdev, tp->mmio_addr);
+#endif /* USE_IO_OPS */
/* it's ok to call this even if we have no regions to free */
pci_release_regions (pdev);
@@ -753,7 +728,7 @@
}
-static void rtl8139_chip_reset (void *ioaddr)
+static void rtl8139_chip_reset (void __iomem *ioaddr)
{
int i;
@@ -773,7 +748,7 @@
static int __devinit rtl8139_init_board (struct pci_dev *pdev,
struct net_device **dev_out)
{
- void *ioaddr;
+ void __iomem *ioaddr;
struct net_device *dev;
struct rtl8139_private *tp;
u8 tmp8;
@@ -855,13 +830,18 @@
pci_set_master (pdev);
#ifdef USE_IO_OPS
- ioaddr = (void *) pio_start;
+ ioaddr = ioport_map(pio_start, pio_len);
+ if (!ioaddr) {
+ printk (KERN_ERR PFX "%s: cannot map PIO, aborting\n", pci_name(pdev));
+ rc = -EIO;
+ goto err_out;
+ }
dev->base_addr = pio_start;
tp->mmio_addr = ioaddr;
tp->regs_len = pio_len;
#else
/* ioremap MMIO region */
- ioaddr = ioremap (mmio_start, mmio_len);
+ ioaddr = pci_iomap(pdev, 1, 0);
if (ioaddr == NULL) {
printk (KERN_ERR PFX "%s: cannot remap MMIO, aborting\n", pci_name(pdev));
rc = -EIO;
@@ -947,7 +927,7 @@
struct net_device *dev = NULL;
struct rtl8139_private *tp;
int i, addr_len, option;
- void *ioaddr;
+ void __iomem *ioaddr;
static int board_idx = -1;
u8 pci_rev;
@@ -1147,47 +1127,46 @@
No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
*/
-#define eeprom_delay() readl(ee_addr)
+#define eeprom_delay() RTL_R32(Cfg9346)
/* The EEPROM commands include the alway-set leading bit. */
#define EE_WRITE_CMD (5)
#define EE_READ_CMD (6)
#define EE_ERASE_CMD (7)
-static int __devinit read_eeprom (void *ioaddr, int location, int addr_len)
+static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
{
int i;
unsigned retval = 0;
- void *ee_addr = ioaddr + Cfg9346;
int read_cmd = location | (EE_READ_CMD << addr_len);
- writeb (EE_ENB & ~EE_CS, ee_addr);
- writeb (EE_ENB, ee_addr);
+ RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
+ RTL_W8 (Cfg9346, EE_ENB);
eeprom_delay ();
/* Shift the read command bits out. */
for (i = 4 + addr_len; i >= 0; i--) {
int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
- writeb (EE_ENB | dataval, ee_addr);
+ RTL_W8 (Cfg9346, EE_ENB | dataval);
eeprom_delay ();
- writeb (EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
+ RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
eeprom_delay ();
}
- writeb (EE_ENB, ee_addr);
+ RTL_W8 (Cfg9346, EE_ENB);
eeprom_delay ();
for (i = 16; i > 0; i--) {
- writeb (EE_ENB | EE_SHIFT_CLK, ee_addr);
+ RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
eeprom_delay ();
retval =
- (retval << 1) | ((readb (ee_addr) & EE_DATA_READ) ? 1 :
+ (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
0);
- writeb (EE_ENB, ee_addr);
+ RTL_W8 (Cfg9346, EE_ENB);
eeprom_delay ();
}
/* Terminate the EEPROM access. */
- writeb (~EE_CS, ee_addr);
+ RTL_W8 (Cfg9346, ~EE_CS);
eeprom_delay ();
return retval;
@@ -1206,7 +1185,7 @@
#define MDIO_WRITE0 (MDIO_DIR)
#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
-#define mdio_delay(mdio_addr) readb(mdio_addr)
+#define mdio_delay() RTL_R8(Config4)
static char mii_2_8139_map[8] = {
@@ -1223,15 +1202,15 @@
#ifdef CONFIG_8139TOO_8129
/* Syncronize the MII management interface by shifting 32 one bits out. */
-static void mdio_sync (void *mdio_addr)
+static void mdio_sync (void __iomem *ioaddr)
{
int i;
for (i = 32; i >= 0; i--) {
- writeb (MDIO_WRITE1, mdio_addr);
- mdio_delay (mdio_addr);
- writeb (MDIO_WRITE1 | MDIO_CLK, mdio_addr);
- mdio_delay (mdio_addr);
+ RTL_W8 (Config4, MDIO_WRITE1);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
+ mdio_delay ();
}
}
#endif
@@ -1241,35 +1220,36 @@
struct rtl8139_private *tp = netdev_priv(dev);
int retval = 0;
#ifdef CONFIG_8139TOO_8129
- void *mdio_addr = tp->mmio_addr + Config4;
+ void __iomem *ioaddr = tp->mmio_addr;
int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
int i;
#endif
if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
return location < 8 && mii_2_8139_map[location] ?
- readw (tp->mmio_addr + mii_2_8139_map[location]) : 0;
+ RTL_R16 (mii_2_8139_map[location]) : 0;
}
#ifdef CONFIG_8139TOO_8129
- mdio_sync (mdio_addr);
+ mdio_sync (ioaddr);
/* Shift the read command bits out. */
for (i = 15; i >= 0; i--) {
int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
- writeb (MDIO_DIR | dataval, mdio_addr);
- mdio_delay (mdio_addr);
- writeb (MDIO_DIR | dataval | MDIO_CLK, mdio_addr);
- mdio_delay (mdio_addr);
+ RTL_W8 (Config4, MDIO_DIR | dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
+ mdio_delay ();
}
/* Read the two transition, 16 data, and wire-idle bits. */
for (i = 19; i > 0; i--) {
- writeb (0, mdio_addr);
- mdio_delay (mdio_addr);
- retval = (retval << 1) | ((readb (mdio_addr) & MDIO_DATA_IN) ? 1 : 0);
- writeb (MDIO_CLK, mdio_addr);
- mdio_delay (mdio_addr);
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
}
#endif
@@ -1282,13 +1262,13 @@
{
struct rtl8139_private *tp = netdev_priv(dev);
#ifdef CONFIG_8139TOO_8129
- void *mdio_addr = tp->mmio_addr + Config4;
+ void __iomem *ioaddr = tp->mmio_addr;
int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
int i;
#endif
if (phy_id > 31) { /* Really a 8139. Use internal registers. */
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
if (location == 0) {
RTL_W8 (Cfg9346, Cfg9346_Unlock);
RTL_W16 (BasicModeCtrl, value);
@@ -1299,23 +1279,23 @@
}
#ifdef CONFIG_8139TOO_8129
- mdio_sync (mdio_addr);
+ mdio_sync (ioaddr);
/* Shift the command bits out. */
for (i = 31; i >= 0; i--) {
int dataval =
(mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
- writeb (dataval, mdio_addr);
- mdio_delay (mdio_addr);
- writeb (dataval | MDIO_CLK, mdio_addr);
- mdio_delay (mdio_addr);
+ RTL_W8 (Config4, dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, dataval | MDIO_CLK);
+ mdio_delay ();
}
/* Clear out extra bits. */
for (i = 2; i > 0; i--) {
- writeb (0, mdio_addr);
- mdio_delay (mdio_addr);
- writeb (MDIO_CLK, mdio_addr);
- mdio_delay (mdio_addr);
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
}
#endif
}
@@ -1325,7 +1305,7 @@
{
struct rtl8139_private *tp = netdev_priv(dev);
int retval;
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
retval = request_irq (dev->irq, rtl8139_interrupt, SA_SHIRQ, dev->name, dev);
if (retval)
@@ -1382,7 +1362,7 @@
static void rtl8139_hw_start (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
u32 i;
u8 tmp;
@@ -1484,7 +1464,7 @@
struct rtl8139_private *tp)
{
int linkcase;
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
/* This is a complicated state machine to configure the "twister" for
impedance/echos based on the cable length.
@@ -1568,7 +1548,7 @@
static inline void rtl8139_thread_iter (struct net_device *dev,
struct rtl8139_private *tp,
- void *ioaddr)
+ void __iomem *ioaddr)
{
int mii_lpa;
@@ -1676,7 +1656,7 @@
static void rtl8139_tx_timeout (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
int i;
u8 tmp8;
unsigned long flags;
@@ -1721,7 +1701,7 @@
static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
unsigned int entry;
unsigned int len = skb->len;
@@ -1763,7 +1743,7 @@
static void rtl8139_tx_interrupt (struct net_device *dev,
struct rtl8139_private *tp,
- void *ioaddr)
+ void __iomem *ioaddr)
{
unsigned long dirty_tx, tx_left;
@@ -1833,7 +1813,7 @@
/* TODO: clean this up! Rx reset need not be this intensive */
static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
- struct rtl8139_private *tp, void *ioaddr)
+ struct rtl8139_private *tp, void __iomem *ioaddr)
{
u8 tmp8;
#ifdef CONFIG_8139_OLD_RX_RESET
@@ -1930,7 +1910,7 @@
static void rtl8139_isr_ack(struct rtl8139_private *tp)
{
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
u16 status;
status = RTL_R16 (IntrStatus) & RxAckBits;
@@ -1949,7 +1929,7 @@
static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
int budget)
{
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
int received = 0;
unsigned char *rx_ring = tp->rx_ring;
unsigned int cur_rx = tp->cur_rx;
@@ -2087,7 +2067,7 @@
static void rtl8139_weird_interrupt (struct net_device *dev,
struct rtl8139_private *tp,
- void *ioaddr,
+ void __iomem *ioaddr,
int status, int link_changed)
{
DPRINTK ("%s: Abnormal interrupt, status %8.8x.\n",
@@ -2127,7 +2107,7 @@
static int rtl8139_poll(struct net_device *dev, int *budget)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
int orig_budget = min(*budget, dev->quota);
int done = 1;
@@ -2165,7 +2145,7 @@
{
struct net_device *dev = (struct net_device *) dev_instance;
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
u16 status, ackstat;
int link_changed = 0; /* avoid bogus "uninit" warning */
int handled = 0;
@@ -2241,7 +2221,7 @@
static int rtl8139_close (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
int ret = 0;
unsigned long flags;
@@ -2304,7 +2284,7 @@
static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct rtl8139_private *np = netdev_priv(dev);
- void *ioaddr = np->mmio_addr;
+ void __iomem *ioaddr = np->mmio_addr;
spin_lock_irq(&np->lock);
if (rtl_chip_info[np->chipset].flags & HasLWake) {
@@ -2338,7 +2318,7 @@
static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct rtl8139_private *np = netdev_priv(dev);
- void *ioaddr = np->mmio_addr;
+ void __iomem *ioaddr = np->mmio_addr;
u32 support;
u8 cfg3, cfg5;
@@ -2506,7 +2486,7 @@
static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
unsigned long flags;
if (netif_running(dev)) {
@@ -2525,7 +2505,7 @@
static void __set_rx_mode (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
u32 mc_filter[2]; /* Multicast hash filter */
int i, rx_mode;
u32 tmp;
@@ -2586,7 +2566,7 @@
{
struct net_device *dev = pci_get_drvdata (pdev);
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
unsigned long flags;
pci_save_state (pdev);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3a0a55b..cebee52 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -824,6 +824,18 @@
<file:Documentation/networking/net-modules.txt>. The module
will be called smc9194.
+config DM9000
+ tristate "DM9000 support"
+ depends on ARM && NET_ETHERNET
+ select CRC32
+ select MII
+ ---help---
+ Support for DM9000 chipset.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will be
+ called dm9000.
+
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
depends on NET_ETHERNET && ISA
@@ -1555,6 +1567,7 @@
tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
depends on NET_PCI && PCI
select CRC32
+ select MII
---help---
This is a driver for the Fast Ethernet PCI network cards based on
the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
@@ -2031,6 +2044,15 @@
To compile this driver as a module, choose M here: the module
will be called tg3. This is recommended.
+config BNX2
+ tristate "Broadcom NetXtremeII support"
+ depends on PCI
+ help
+ This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called bnx2. This is recommended.
+
config GIANFAR
tristate "Gianfar Ethernet"
depends on 85xx || 83xx
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6202b10..0d97be0 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -51,6 +51,7 @@
obj-$(CONFIG_STNIC) += stnic.o 8390.o
obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_TIGON3) += tg3.o
+obj-$(CONFIG_BNX2) += bnx2.o
obj-$(CONFIG_TC35815) += tc35815.o
obj-$(CONFIG_SK98LIN) += sk98lin/
obj-$(CONFIG_SKFP) += skfp/
@@ -179,6 +180,7 @@
obj-$(CONFIG_IBMVETH) += ibmveth.o
obj-$(CONFIG_S2IO) += s2io.o
obj-$(CONFIG_SMC91X) += smc91x.o
+obj-$(CONFIG_DM9000) += dm9000.o
obj-$(CONFIG_FEC_8XX) += fec_8xx/
obj-$(CONFIG_ARM) += arm/
@@ -187,7 +189,7 @@
obj-$(CONFIG_WAN) += wan/
obj-$(CONFIG_ARCNET) += arcnet/
obj-$(CONFIG_NET_PCMCIA) += pcmcia/
-obj-$(CONFIG_NET_WIRELESS) += wireless/
+obj-$(CONFIG_NET_RADIO) += wireless/
obj-$(CONFIG_NET_TULIP) += tulip/
obj-$(CONFIG_HAMRADIO) += hamradio/
obj-$(CONFIG_IRDA) += irda/
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index f2e937a..b7dd726 100755
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -738,6 +738,7 @@
short vtag;
#endif
int rx_pkt_limit = dev->quota;
+ unsigned long flags;
do{
/* process receive packets until we use the quota*/
@@ -841,18 +842,19 @@
/* Receive descriptor is empty now */
dev->quota -= num_rx_pkt;
*budget -= num_rx_pkt;
+
+ spin_lock_irqsave(&lp->lock, flags);
netif_rx_complete(dev);
- /* enable receive interrupt */
writel(VAL0|RINTEN0, mmio + INTEN0);
writel(VAL2 | RDMD0, mmio + CMD0);
+ spin_unlock_irqrestore(&lp->lock, flags);
return 0;
+
rx_not_empty:
/* Do not call a netif_rx_complete */
dev->quota -= num_rx_pkt;
*budget -= num_rx_pkt;
return 1;
-
-
}
#else
@@ -1261,18 +1263,20 @@
struct net_device * dev = (struct net_device *) dev_id;
struct amd8111e_priv *lp = netdev_priv(dev);
void __iomem *mmio = lp->mmio;
- unsigned int intr0;
+ unsigned int intr0, intren0;
unsigned int handled = 1;
- if(dev == NULL)
+ if(unlikely(dev == NULL))
return IRQ_NONE;
- if (regs) spin_lock (&lp->lock);
+ spin_lock(&lp->lock);
+
/* disabling interrupt */
writel(INTREN, mmio + CMD0);
/* Read interrupt status */
intr0 = readl(mmio + INT0);
+ intren0 = readl(mmio + INTEN0);
/* Process all the INT event until INTR bit is clear. */
@@ -1293,11 +1297,11 @@
/* Schedule a polling routine */
__netif_rx_schedule(dev);
}
- else {
+ else if (intren0 & RINTEN0) {
printk("************Driver bug! \
interrupt while in poll\n");
- /* Fix by disabling interrupts */
- writel(RINT0, mmio + INT0);
+ /* Fix by disable receive interrupts */
+ writel(RINTEN0, mmio + INTEN0);
}
}
#else
@@ -1321,7 +1325,7 @@
err_no_interrupt:
writel( VAL0 | INTREN,mmio + CMD0);
- if (regs) spin_unlock(&lp->lock);
+ spin_unlock(&lp->lock);
return IRQ_RETVAL(handled);
}
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
new file mode 100644
index 0000000..8acc655
--- /dev/null
+++ b/drivers/net/bnx2.c
@@ -0,0 +1,5530 @@
+/* bnx2.c: Broadcom NX2 network driver.
+ *
+ * Copyright (c) 2004, 2005 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Michael Chan (mchan@broadcom.com)
+ */
+
+#include "bnx2.h"
+#include "bnx2_fw.h"
+
+#define DRV_MODULE_NAME "bnx2"
+#define PFX DRV_MODULE_NAME ": "
+#define DRV_MODULE_VERSION "1.2.19"
+#define DRV_MODULE_RELDATE "May 23, 2005"
+
+#define RUN_AT(x) (jiffies + (x))
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (5*HZ)
+
+static char version[] __devinitdata =
+ "Broadcom NetXtreme II Gigabit Ethernet Driver " DRV_MODULE_NAME " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+
+MODULE_AUTHOR("Michael Chan <mchan@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706 Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+static int disable_msi = 0;
+
+module_param(disable_msi, int, 0);
+MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
+
+typedef enum {
+ BCM5706 = 0,
+ NC370T,
+ NC370I,
+ BCM5706S,
+ NC370F,
+} board_t;
+
+/* indexed by board_t, above */
+static struct {
+ char *name;
+} board_info[] __devinitdata = {
+ { "Broadcom NetXtreme II BCM5706 1000Base-T" },
+ { "HP NC370T Multifunction Gigabit Server Adapter" },
+ { "HP NC370i Multifunction Gigabit Server Adapter" },
+ { "Broadcom NetXtreme II BCM5706 1000Base-SX" },
+ { "HP NC370F Multifunction Gigabit Server Adapter" },
+ { 0 },
+ };
+
+static struct pci_device_id bnx2_pci_tbl[] = {
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706,
+ PCI_VENDOR_ID_HP, 0x3101, 0, 0, NC370T },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706,
+ PCI_VENDOR_ID_HP, 0x3106, 0, 0, NC370I },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5706 },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706S,
+ PCI_VENDOR_ID_HP, 0x3102, 0, 0, NC370F },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706S,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5706S },
+ { 0, }
+};
+
+static struct flash_spec flash_table[] =
+{
+ /* Slow EEPROM */
+ {0x00000000, 0x40030380, 0x009f0081, 0xa184a053, 0xaf000400,
+ 1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE,
+ SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE,
+ "EEPROM - slow"},
+ /* Fast EEPROM */
+ {0x02000000, 0x62008380, 0x009f0081, 0xa184a053, 0xaf000400,
+ 1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE,
+ SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE,
+ "EEPROM - fast"},
+ /* ATMEL AT45DB011B (buffered flash) */
+ {0x02000003, 0x6e008173, 0x00570081, 0x68848353, 0xaf000400,
+ 1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE,
+ BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE,
+ "Buffered flash"},
+ /* Saifun SA25F005 (non-buffered flash) */
+ /* strap, cfg1, & write1 need updates */
+ {0x01000003, 0x5f008081, 0x00050081, 0x03840253, 0xaf020406,
+ 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
+ SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE,
+ "Non-buffered flash (64kB)"},
+ /* Saifun SA25F010 (non-buffered flash) */
+ /* strap, cfg1, & write1 need updates */
+ {0x00000001, 0x47008081, 0x00050081, 0x03840253, 0xaf020406,
+ 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
+ SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*2,
+ "Non-buffered flash (128kB)"},
+ /* Saifun SA25F020 (non-buffered flash) */
+ /* strap, cfg1, & write1 need updates */
+ {0x00000003, 0x4f008081, 0x00050081, 0x03840253, 0xaf020406,
+ 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
+ SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*4,
+ "Non-buffered flash (256kB)"},
+};
+
+MODULE_DEVICE_TABLE(pci, bnx2_pci_tbl);
+
+static u32
+bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset)
+{
+ REG_WR(bp, BNX2_PCICFG_REG_WINDOW_ADDRESS, offset);
+ return (REG_RD(bp, BNX2_PCICFG_REG_WINDOW));
+}
+
+static void
+bnx2_reg_wr_ind(struct bnx2 *bp, u32 offset, u32 val)
+{
+ REG_WR(bp, BNX2_PCICFG_REG_WINDOW_ADDRESS, offset);
+ REG_WR(bp, BNX2_PCICFG_REG_WINDOW, val);
+}
+
+static void
+bnx2_ctx_wr(struct bnx2 *bp, u32 cid_addr, u32 offset, u32 val)
+{
+ offset += cid_addr;
+ REG_WR(bp, BNX2_CTX_DATA_ADR, offset);
+ REG_WR(bp, BNX2_CTX_DATA, val);
+}
+
+static int
+bnx2_read_phy(struct bnx2 *bp, u32 reg, u32 *val)
+{
+ u32 val1;
+ int i, ret;
+
+ if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
+ val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE);
+ val1 &= ~BNX2_EMAC_MDIO_MODE_AUTO_POLL;
+
+ REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1);
+ REG_RD(bp, BNX2_EMAC_MDIO_MODE);
+
+ udelay(40);
+ }
+
+ val1 = (bp->phy_addr << 21) | (reg << 16) |
+ BNX2_EMAC_MDIO_COMM_COMMAND_READ | BNX2_EMAC_MDIO_COMM_DISEXT |
+ BNX2_EMAC_MDIO_COMM_START_BUSY;
+ REG_WR(bp, BNX2_EMAC_MDIO_COMM, val1);
+
+ for (i = 0; i < 50; i++) {
+ udelay(10);
+
+ val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM);
+ if (!(val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)) {
+ udelay(5);
+
+ val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM);
+ val1 &= BNX2_EMAC_MDIO_COMM_DATA;
+
+ break;
+ }
+ }
+
+ if (val1 & BNX2_EMAC_MDIO_COMM_START_BUSY) {
+ *val = 0x0;
+ ret = -EBUSY;
+ }
+ else {
+ *val = val1;
+ ret = 0;
+ }
+
+ if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
+ val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE);
+ val1 |= BNX2_EMAC_MDIO_MODE_AUTO_POLL;
+
+ REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1);
+ REG_RD(bp, BNX2_EMAC_MDIO_MODE);
+
+ udelay(40);
+ }
+
+ return ret;
+}
+
+static int
+bnx2_write_phy(struct bnx2 *bp, u32 reg, u32 val)
+{
+ u32 val1;
+ int i, ret;
+
+ if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
+ val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE);
+ val1 &= ~BNX2_EMAC_MDIO_MODE_AUTO_POLL;
+
+ REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1);
+ REG_RD(bp, BNX2_EMAC_MDIO_MODE);
+
+ udelay(40);
+ }
+
+ val1 = (bp->phy_addr << 21) | (reg << 16) | val |
+ BNX2_EMAC_MDIO_COMM_COMMAND_WRITE |
+ BNX2_EMAC_MDIO_COMM_START_BUSY | BNX2_EMAC_MDIO_COMM_DISEXT;
+ REG_WR(bp, BNX2_EMAC_MDIO_COMM, val1);
+
+ for (i = 0; i < 50; i++) {
+ udelay(10);
+
+ val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM);
+ if (!(val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)) {
+ udelay(5);
+ break;
+ }
+ }
+
+ if (val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)
+ ret = -EBUSY;
+ else
+ ret = 0;
+
+ if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
+ val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE);
+ val1 |= BNX2_EMAC_MDIO_MODE_AUTO_POLL;
+
+ REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1);
+ REG_RD(bp, BNX2_EMAC_MDIO_MODE);
+
+ udelay(40);
+ }
+
+ return ret;
+}
+
+static void
+bnx2_disable_int(struct bnx2 *bp)
+{
+ REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
+ BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
+ REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD);
+}
+
+static void
+bnx2_enable_int(struct bnx2 *bp)
+{
+ u32 val;
+
+ REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
+ BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | bp->last_status_idx);
+
+ val = REG_RD(bp, BNX2_HC_COMMAND);
+ REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW);
+}
+
+static void
+bnx2_disable_int_sync(struct bnx2 *bp)
+{
+ atomic_inc(&bp->intr_sem);
+ bnx2_disable_int(bp);
+ synchronize_irq(bp->pdev->irq);
+}
+
+static void
+bnx2_netif_stop(struct bnx2 *bp)
+{
+ bnx2_disable_int_sync(bp);
+ if (netif_running(bp->dev)) {
+ netif_poll_disable(bp->dev);
+ netif_tx_disable(bp->dev);
+ bp->dev->trans_start = jiffies; /* prevent tx timeout */
+ }
+}
+
+static void
+bnx2_netif_start(struct bnx2 *bp)
+{
+ if (atomic_dec_and_test(&bp->intr_sem)) {
+ if (netif_running(bp->dev)) {
+ netif_wake_queue(bp->dev);
+ netif_poll_enable(bp->dev);
+ bnx2_enable_int(bp);
+ }
+ }
+}
+
+static void
+bnx2_free_mem(struct bnx2 *bp)
+{
+ if (bp->stats_blk) {
+ pci_free_consistent(bp->pdev, sizeof(struct statistics_block),
+ bp->stats_blk, bp->stats_blk_mapping);
+ bp->stats_blk = NULL;
+ }
+ if (bp->status_blk) {
+ pci_free_consistent(bp->pdev, sizeof(struct status_block),
+ bp->status_blk, bp->status_blk_mapping);
+ bp->status_blk = NULL;
+ }
+ if (bp->tx_desc_ring) {
+ pci_free_consistent(bp->pdev,
+ sizeof(struct tx_bd) * TX_DESC_CNT,
+ bp->tx_desc_ring, bp->tx_desc_mapping);
+ bp->tx_desc_ring = NULL;
+ }
+ if (bp->tx_buf_ring) {
+ kfree(bp->tx_buf_ring);
+ bp->tx_buf_ring = NULL;
+ }
+ if (bp->rx_desc_ring) {
+ pci_free_consistent(bp->pdev,
+ sizeof(struct rx_bd) * RX_DESC_CNT,
+ bp->rx_desc_ring, bp->rx_desc_mapping);
+ bp->rx_desc_ring = NULL;
+ }
+ if (bp->rx_buf_ring) {
+ kfree(bp->rx_buf_ring);
+ bp->rx_buf_ring = NULL;
+ }
+}
+
+static int
+bnx2_alloc_mem(struct bnx2 *bp)
+{
+ bp->tx_buf_ring = kmalloc(sizeof(struct sw_bd) * TX_DESC_CNT,
+ GFP_KERNEL);
+ if (bp->tx_buf_ring == NULL)
+ return -ENOMEM;
+
+ memset(bp->tx_buf_ring, 0, sizeof(struct sw_bd) * TX_DESC_CNT);
+ bp->tx_desc_ring = pci_alloc_consistent(bp->pdev,
+ sizeof(struct tx_bd) *
+ TX_DESC_CNT,
+ &bp->tx_desc_mapping);
+ if (bp->tx_desc_ring == NULL)
+ goto alloc_mem_err;
+
+ bp->rx_buf_ring = kmalloc(sizeof(struct sw_bd) * RX_DESC_CNT,
+ GFP_KERNEL);
+ if (bp->rx_buf_ring == NULL)
+ goto alloc_mem_err;
+
+ memset(bp->rx_buf_ring, 0, sizeof(struct sw_bd) * RX_DESC_CNT);
+ bp->rx_desc_ring = pci_alloc_consistent(bp->pdev,
+ sizeof(struct rx_bd) *
+ RX_DESC_CNT,
+ &bp->rx_desc_mapping);
+ if (bp->rx_desc_ring == NULL)
+ goto alloc_mem_err;
+
+ bp->status_blk = pci_alloc_consistent(bp->pdev,
+ sizeof(struct status_block),
+ &bp->status_blk_mapping);
+ if (bp->status_blk == NULL)
+ goto alloc_mem_err;
+
+ memset(bp->status_blk, 0, sizeof(struct status_block));
+
+ bp->stats_blk = pci_alloc_consistent(bp->pdev,
+ sizeof(struct statistics_block),
+ &bp->stats_blk_mapping);
+ if (bp->stats_blk == NULL)
+ goto alloc_mem_err;
+
+ memset(bp->stats_blk, 0, sizeof(struct statistics_block));
+
+ return 0;
+
+alloc_mem_err:
+ bnx2_free_mem(bp);
+ return -ENOMEM;
+}
+
+static void
+bnx2_report_link(struct bnx2 *bp)
+{
+ if (bp->link_up) {
+ netif_carrier_on(bp->dev);
+ printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name);
+
+ printk("%d Mbps ", bp->line_speed);
+
+ if (bp->duplex == DUPLEX_FULL)
+ printk("full duplex");
+ else
+ printk("half duplex");
+
+ if (bp->flow_ctrl) {
+ if (bp->flow_ctrl & FLOW_CTRL_RX) {
+ printk(", receive ");
+ if (bp->flow_ctrl & FLOW_CTRL_TX)
+ printk("& transmit ");
+ }
+ else {
+ printk(", transmit ");
+ }
+ printk("flow control ON");
+ }
+ printk("\n");
+ }
+ else {
+ netif_carrier_off(bp->dev);
+ printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
+ }
+}
+
+static void
+bnx2_resolve_flow_ctrl(struct bnx2 *bp)
+{
+ u32 local_adv, remote_adv;
+
+ bp->flow_ctrl = 0;
+ if ((bp->autoneg & (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) !=
+ (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) {
+
+ if (bp->duplex == DUPLEX_FULL) {
+ bp->flow_ctrl = bp->req_flow_ctrl;
+ }
+ return;
+ }
+
+ if (bp->duplex != DUPLEX_FULL) {
+ return;
+ }
+
+ bnx2_read_phy(bp, MII_ADVERTISE, &local_adv);
+ bnx2_read_phy(bp, MII_LPA, &remote_adv);
+
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ u32 new_local_adv = 0;
+ u32 new_remote_adv = 0;
+
+ if (local_adv & ADVERTISE_1000XPAUSE)
+ new_local_adv |= ADVERTISE_PAUSE_CAP;
+ if (local_adv & ADVERTISE_1000XPSE_ASYM)
+ new_local_adv |= ADVERTISE_PAUSE_ASYM;
+ if (remote_adv & ADVERTISE_1000XPAUSE)
+ new_remote_adv |= ADVERTISE_PAUSE_CAP;
+ if (remote_adv & ADVERTISE_1000XPSE_ASYM)
+ new_remote_adv |= ADVERTISE_PAUSE_ASYM;
+
+ local_adv = new_local_adv;
+ remote_adv = new_remote_adv;
+ }
+
+ /* See Table 28B-3 of 802.3ab-1999 spec. */
+ if (local_adv & ADVERTISE_PAUSE_CAP) {
+ if(local_adv & ADVERTISE_PAUSE_ASYM) {
+ if (remote_adv & ADVERTISE_PAUSE_CAP) {
+ bp->flow_ctrl = FLOW_CTRL_TX | FLOW_CTRL_RX;
+ }
+ else if (remote_adv & ADVERTISE_PAUSE_ASYM) {
+ bp->flow_ctrl = FLOW_CTRL_RX;
+ }
+ }
+ else {
+ if (remote_adv & ADVERTISE_PAUSE_CAP) {
+ bp->flow_ctrl = FLOW_CTRL_TX | FLOW_CTRL_RX;
+ }
+ }
+ }
+ else if (local_adv & ADVERTISE_PAUSE_ASYM) {
+ if ((remote_adv & ADVERTISE_PAUSE_CAP) &&
+ (remote_adv & ADVERTISE_PAUSE_ASYM)) {
+
+ bp->flow_ctrl = FLOW_CTRL_TX;
+ }
+ }
+}
+
+static int
+bnx2_serdes_linkup(struct bnx2 *bp)
+{
+ u32 bmcr, local_adv, remote_adv, common;
+
+ bp->link_up = 1;
+ bp->line_speed = SPEED_1000;
+
+ bnx2_read_phy(bp, MII_BMCR, &bmcr);
+ if (bmcr & BMCR_FULLDPLX) {
+ bp->duplex = DUPLEX_FULL;
+ }
+ else {
+ bp->duplex = DUPLEX_HALF;
+ }
+
+ if (!(bmcr & BMCR_ANENABLE)) {
+ return 0;
+ }
+
+ bnx2_read_phy(bp, MII_ADVERTISE, &local_adv);
+ bnx2_read_phy(bp, MII_LPA, &remote_adv);
+
+ common = local_adv & remote_adv;
+ if (common & (ADVERTISE_1000XHALF | ADVERTISE_1000XFULL)) {
+
+ if (common & ADVERTISE_1000XFULL) {
+ bp->duplex = DUPLEX_FULL;
+ }
+ else {
+ bp->duplex = DUPLEX_HALF;
+ }
+ }
+
+ return 0;
+}
+
+static int
+bnx2_copper_linkup(struct bnx2 *bp)
+{
+ u32 bmcr;
+
+ bnx2_read_phy(bp, MII_BMCR, &bmcr);
+ if (bmcr & BMCR_ANENABLE) {
+ u32 local_adv, remote_adv, common;
+
+ bnx2_read_phy(bp, MII_CTRL1000, &local_adv);
+ bnx2_read_phy(bp, MII_STAT1000, &remote_adv);
+
+ common = local_adv & (remote_adv >> 2);
+ if (common & ADVERTISE_1000FULL) {
+ bp->line_speed = SPEED_1000;
+ bp->duplex = DUPLEX_FULL;
+ }
+ else if (common & ADVERTISE_1000HALF) {
+ bp->line_speed = SPEED_1000;
+ bp->duplex = DUPLEX_HALF;
+ }
+ else {
+ bnx2_read_phy(bp, MII_ADVERTISE, &local_adv);
+ bnx2_read_phy(bp, MII_LPA, &remote_adv);
+
+ common = local_adv & remote_adv;
+ if (common & ADVERTISE_100FULL) {
+ bp->line_speed = SPEED_100;
+ bp->duplex = DUPLEX_FULL;
+ }
+ else if (common & ADVERTISE_100HALF) {
+ bp->line_speed = SPEED_100;
+ bp->duplex = DUPLEX_HALF;
+ }
+ else if (common & ADVERTISE_10FULL) {
+ bp->line_speed = SPEED_10;
+ bp->duplex = DUPLEX_FULL;
+ }
+ else if (common & ADVERTISE_10HALF) {
+ bp->line_speed = SPEED_10;
+ bp->duplex = DUPLEX_HALF;
+ }
+ else {
+ bp->line_speed = 0;
+ bp->link_up = 0;
+ }
+ }
+ }
+ else {
+ if (bmcr & BMCR_SPEED100) {
+ bp->line_speed = SPEED_100;
+ }
+ else {
+ bp->line_speed = SPEED_10;
+ }
+ if (bmcr & BMCR_FULLDPLX) {
+ bp->duplex = DUPLEX_FULL;
+ }
+ else {
+ bp->duplex = DUPLEX_HALF;
+ }
+ }
+
+ return 0;
+}
+
+static int
+bnx2_set_mac_link(struct bnx2 *bp)
+{
+ u32 val;
+
+ REG_WR(bp, BNX2_EMAC_TX_LENGTHS, 0x2620);
+ if (bp->link_up && (bp->line_speed == SPEED_1000) &&
+ (bp->duplex == DUPLEX_HALF)) {
+ REG_WR(bp, BNX2_EMAC_TX_LENGTHS, 0x26ff);
+ }
+
+ /* Configure the EMAC mode register. */
+ val = REG_RD(bp, BNX2_EMAC_MODE);
+
+ val &= ~(BNX2_EMAC_MODE_PORT | BNX2_EMAC_MODE_HALF_DUPLEX |
+ BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK);
+
+ if (bp->link_up) {
+ if (bp->line_speed != SPEED_1000)
+ val |= BNX2_EMAC_MODE_PORT_MII;
+ else
+ val |= BNX2_EMAC_MODE_PORT_GMII;
+ }
+ else {
+ val |= BNX2_EMAC_MODE_PORT_GMII;
+ }
+
+ /* Set the MAC to operate in the appropriate duplex mode. */
+ if (bp->duplex == DUPLEX_HALF)
+ val |= BNX2_EMAC_MODE_HALF_DUPLEX;
+ REG_WR(bp, BNX2_EMAC_MODE, val);
+
+ /* Enable/disable rx PAUSE. */
+ bp->rx_mode &= ~BNX2_EMAC_RX_MODE_FLOW_EN;
+
+ if (bp->flow_ctrl & FLOW_CTRL_RX)
+ bp->rx_mode |= BNX2_EMAC_RX_MODE_FLOW_EN;
+ REG_WR(bp, BNX2_EMAC_RX_MODE, bp->rx_mode);
+
+ /* Enable/disable tx PAUSE. */
+ val = REG_RD(bp, BNX2_EMAC_TX_MODE);
+ val &= ~BNX2_EMAC_TX_MODE_FLOW_EN;
+
+ if (bp->flow_ctrl & FLOW_CTRL_TX)
+ val |= BNX2_EMAC_TX_MODE_FLOW_EN;
+ REG_WR(bp, BNX2_EMAC_TX_MODE, val);
+
+ /* Acknowledge the interrupt. */
+ REG_WR(bp, BNX2_EMAC_STATUS, BNX2_EMAC_STATUS_LINK_CHANGE);
+
+ return 0;
+}
+
+static int
+bnx2_set_link(struct bnx2 *bp)
+{
+ u32 bmsr;
+ u8 link_up;
+
+ if (bp->loopback == MAC_LOOPBACK) {
+ bp->link_up = 1;
+ return 0;
+ }
+
+ link_up = bp->link_up;
+
+ bnx2_read_phy(bp, MII_BMSR, &bmsr);
+ bnx2_read_phy(bp, MII_BMSR, &bmsr);
+
+ if ((bp->phy_flags & PHY_SERDES_FLAG) &&
+ (CHIP_NUM(bp) == CHIP_NUM_5706)) {
+ u32 val;
+
+ val = REG_RD(bp, BNX2_EMAC_STATUS);
+ if (val & BNX2_EMAC_STATUS_LINK)
+ bmsr |= BMSR_LSTATUS;
+ else
+ bmsr &= ~BMSR_LSTATUS;
+ }
+
+ if (bmsr & BMSR_LSTATUS) {
+ bp->link_up = 1;
+
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ bnx2_serdes_linkup(bp);
+ }
+ else {
+ bnx2_copper_linkup(bp);
+ }
+ bnx2_resolve_flow_ctrl(bp);
+ }
+ else {
+ if ((bp->phy_flags & PHY_SERDES_FLAG) &&
+ (bp->autoneg & AUTONEG_SPEED)) {
+
+ u32 bmcr;
+
+ bnx2_read_phy(bp, MII_BMCR, &bmcr);
+ if (!(bmcr & BMCR_ANENABLE)) {
+ bnx2_write_phy(bp, MII_BMCR, bmcr |
+ BMCR_ANENABLE);
+ }
+ }
+ bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG;
+ bp->link_up = 0;
+ }
+
+ if (bp->link_up != link_up) {
+ bnx2_report_link(bp);
+ }
+
+ bnx2_set_mac_link(bp);
+
+ return 0;
+}
+
+static int
+bnx2_reset_phy(struct bnx2 *bp)
+{
+ int i;
+ u32 reg;
+
+ bnx2_write_phy(bp, MII_BMCR, BMCR_RESET);
+
+#define PHY_RESET_MAX_WAIT 100
+ for (i = 0; i < PHY_RESET_MAX_WAIT; i++) {
+ udelay(10);
+
+ bnx2_read_phy(bp, MII_BMCR, ®);
+ if (!(reg & BMCR_RESET)) {
+ udelay(20);
+ break;
+ }
+ }
+ if (i == PHY_RESET_MAX_WAIT) {
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static u32
+bnx2_phy_get_pause_adv(struct bnx2 *bp)
+{
+ u32 adv = 0;
+
+ if ((bp->req_flow_ctrl & (FLOW_CTRL_RX | FLOW_CTRL_TX)) ==
+ (FLOW_CTRL_RX | FLOW_CTRL_TX)) {
+
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ adv = ADVERTISE_1000XPAUSE;
+ }
+ else {
+ adv = ADVERTISE_PAUSE_CAP;
+ }
+ }
+ else if (bp->req_flow_ctrl & FLOW_CTRL_TX) {
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ adv = ADVERTISE_1000XPSE_ASYM;
+ }
+ else {
+ adv = ADVERTISE_PAUSE_ASYM;
+ }
+ }
+ else if (bp->req_flow_ctrl & FLOW_CTRL_RX) {
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ adv = ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM;
+ }
+ else {
+ adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+ }
+ }
+ return adv;
+}
+
+static int
+bnx2_setup_serdes_phy(struct bnx2 *bp)
+{
+ u32 adv, bmcr;
+ u32 new_adv = 0;
+
+ if (!(bp->autoneg & AUTONEG_SPEED)) {
+ u32 new_bmcr;
+
+ bnx2_read_phy(bp, MII_BMCR, &bmcr);
+ new_bmcr = bmcr & ~BMCR_ANENABLE;
+ new_bmcr |= BMCR_SPEED1000;
+ if (bp->req_duplex == DUPLEX_FULL) {
+ new_bmcr |= BMCR_FULLDPLX;
+ }
+ else {
+ new_bmcr &= ~BMCR_FULLDPLX;
+ }
+ if (new_bmcr != bmcr) {
+ /* Force a link down visible on the other side */
+ if (bp->link_up) {
+ bnx2_read_phy(bp, MII_ADVERTISE, &adv);
+ adv &= ~(ADVERTISE_1000XFULL |
+ ADVERTISE_1000XHALF);
+ bnx2_write_phy(bp, MII_ADVERTISE, adv);
+ bnx2_write_phy(bp, MII_BMCR, bmcr |
+ BMCR_ANRESTART | BMCR_ANENABLE);
+
+ bp->link_up = 0;
+ netif_carrier_off(bp->dev);
+ }
+ bnx2_write_phy(bp, MII_BMCR, new_bmcr);
+ }
+ return 0;
+ }
+
+ if (bp->advertising & ADVERTISED_1000baseT_Full)
+ new_adv |= ADVERTISE_1000XFULL;
+
+ new_adv |= bnx2_phy_get_pause_adv(bp);
+
+ bnx2_read_phy(bp, MII_ADVERTISE, &adv);
+ bnx2_read_phy(bp, MII_BMCR, &bmcr);
+
+ bp->serdes_an_pending = 0;
+ if ((adv != new_adv) || ((bmcr & BMCR_ANENABLE) == 0)) {
+ /* Force a link down visible on the other side */
+ if (bp->link_up) {
+ int i;
+
+ bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK);
+ for (i = 0; i < 110; i++) {
+ udelay(100);
+ }
+ }
+
+ bnx2_write_phy(bp, MII_ADVERTISE, new_adv);
+ bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART |
+ BMCR_ANENABLE);
+ bp->serdes_an_pending = SERDES_AN_TIMEOUT / bp->timer_interval;
+ }
+
+ return 0;
+}
+
+#define ETHTOOL_ALL_FIBRE_SPEED \
+ (ADVERTISED_1000baseT_Full)
+
+#define ETHTOOL_ALL_COPPER_SPEED \
+ (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \
+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \
+ ADVERTISED_1000baseT_Full)
+
+#define PHY_ALL_10_100_SPEED (ADVERTISE_10HALF | ADVERTISE_10FULL | \
+ ADVERTISE_100HALF | ADVERTISE_100FULL | ADVERTISE_CSMA)
+
+#define PHY_ALL_1000_SPEED (ADVERTISE_1000HALF | ADVERTISE_1000FULL)
+
+static int
+bnx2_setup_copper_phy(struct bnx2 *bp)
+{
+ u32 bmcr;
+ u32 new_bmcr;
+
+ bnx2_read_phy(bp, MII_BMCR, &bmcr);
+
+ if (bp->autoneg & AUTONEG_SPEED) {
+ u32 adv_reg, adv1000_reg;
+ u32 new_adv_reg = 0;
+ u32 new_adv1000_reg = 0;
+
+ bnx2_read_phy(bp, MII_ADVERTISE, &adv_reg);
+ adv_reg &= (PHY_ALL_10_100_SPEED | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+
+ bnx2_read_phy(bp, MII_CTRL1000, &adv1000_reg);
+ adv1000_reg &= PHY_ALL_1000_SPEED;
+
+ if (bp->advertising & ADVERTISED_10baseT_Half)
+ new_adv_reg |= ADVERTISE_10HALF;
+ if (bp->advertising & ADVERTISED_10baseT_Full)
+ new_adv_reg |= ADVERTISE_10FULL;
+ if (bp->advertising & ADVERTISED_100baseT_Half)
+ new_adv_reg |= ADVERTISE_100HALF;
+ if (bp->advertising & ADVERTISED_100baseT_Full)
+ new_adv_reg |= ADVERTISE_100FULL;
+ if (bp->advertising & ADVERTISED_1000baseT_Full)
+ new_adv1000_reg |= ADVERTISE_1000FULL;
+
+ new_adv_reg |= ADVERTISE_CSMA;
+
+ new_adv_reg |= bnx2_phy_get_pause_adv(bp);
+
+ if ((adv1000_reg != new_adv1000_reg) ||
+ (adv_reg != new_adv_reg) ||
+ ((bmcr & BMCR_ANENABLE) == 0)) {
+
+ bnx2_write_phy(bp, MII_ADVERTISE, new_adv_reg);
+ bnx2_write_phy(bp, MII_CTRL1000, new_adv1000_reg);
+ bnx2_write_phy(bp, MII_BMCR, BMCR_ANRESTART |
+ BMCR_ANENABLE);
+ }
+ else if (bp->link_up) {
+ /* Flow ctrl may have changed from auto to forced */
+ /* or vice-versa. */
+
+ bnx2_resolve_flow_ctrl(bp);
+ bnx2_set_mac_link(bp);
+ }
+ return 0;
+ }
+
+ new_bmcr = 0;
+ if (bp->req_line_speed == SPEED_100) {
+ new_bmcr |= BMCR_SPEED100;
+ }
+ if (bp->req_duplex == DUPLEX_FULL) {
+ new_bmcr |= BMCR_FULLDPLX;
+ }
+ if (new_bmcr != bmcr) {
+ u32 bmsr;
+ int i = 0;
+
+ bnx2_read_phy(bp, MII_BMSR, &bmsr);
+ bnx2_read_phy(bp, MII_BMSR, &bmsr);
+
+ if (bmsr & BMSR_LSTATUS) {
+ /* Force link down */
+ bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK);
+ do {
+ udelay(100);
+ bnx2_read_phy(bp, MII_BMSR, &bmsr);
+ bnx2_read_phy(bp, MII_BMSR, &bmsr);
+ i++;
+ } while ((bmsr & BMSR_LSTATUS) && (i < 620));
+ }
+
+ bnx2_write_phy(bp, MII_BMCR, new_bmcr);
+
+ /* Normally, the new speed is setup after the link has
+ * gone down and up again. In some cases, link will not go
+ * down so we need to set up the new speed here.
+ */
+ if (bmsr & BMSR_LSTATUS) {
+ bp->line_speed = bp->req_line_speed;
+ bp->duplex = bp->req_duplex;
+ bnx2_resolve_flow_ctrl(bp);
+ bnx2_set_mac_link(bp);
+ }
+ }
+ return 0;
+}
+
+static int
+bnx2_setup_phy(struct bnx2 *bp)
+{
+ if (bp->loopback == MAC_LOOPBACK)
+ return 0;
+
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ return (bnx2_setup_serdes_phy(bp));
+ }
+ else {
+ return (bnx2_setup_copper_phy(bp));
+ }
+}
+
+static int
+bnx2_init_serdes_phy(struct bnx2 *bp)
+{
+ bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG;
+
+ if (CHIP_NUM(bp) == CHIP_NUM_5706) {
+ REG_WR(bp, BNX2_MISC_UNUSED0, 0x300);
+ }
+
+ if (bp->dev->mtu > 1500) {
+ u32 val;
+
+ /* Set extended packet length bit */
+ bnx2_write_phy(bp, 0x18, 0x7);
+ bnx2_read_phy(bp, 0x18, &val);
+ bnx2_write_phy(bp, 0x18, (val & 0xfff8) | 0x4000);
+
+ bnx2_write_phy(bp, 0x1c, 0x6c00);
+ bnx2_read_phy(bp, 0x1c, &val);
+ bnx2_write_phy(bp, 0x1c, (val & 0x3ff) | 0xec02);
+ }
+ else {
+ u32 val;
+
+ bnx2_write_phy(bp, 0x18, 0x7);
+ bnx2_read_phy(bp, 0x18, &val);
+ bnx2_write_phy(bp, 0x18, val & ~0x4007);
+
+ bnx2_write_phy(bp, 0x1c, 0x6c00);
+ bnx2_read_phy(bp, 0x1c, &val);
+ bnx2_write_phy(bp, 0x1c, (val & 0x3fd) | 0xec00);
+ }
+
+ return 0;
+}
+
+static int
+bnx2_init_copper_phy(struct bnx2 *bp)
+{
+ bp->phy_flags |= PHY_CRC_FIX_FLAG;
+
+ if (bp->phy_flags & PHY_CRC_FIX_FLAG) {
+ bnx2_write_phy(bp, 0x18, 0x0c00);
+ bnx2_write_phy(bp, 0x17, 0x000a);
+ bnx2_write_phy(bp, 0x15, 0x310b);
+ bnx2_write_phy(bp, 0x17, 0x201f);
+ bnx2_write_phy(bp, 0x15, 0x9506);
+ bnx2_write_phy(bp, 0x17, 0x401f);
+ bnx2_write_phy(bp, 0x15, 0x14e2);
+ bnx2_write_phy(bp, 0x18, 0x0400);
+ }
+
+ if (bp->dev->mtu > 1500) {
+ u32 val;
+
+ /* Set extended packet length bit */
+ bnx2_write_phy(bp, 0x18, 0x7);
+ bnx2_read_phy(bp, 0x18, &val);
+ bnx2_write_phy(bp, 0x18, val | 0x4000);
+
+ bnx2_read_phy(bp, 0x10, &val);
+ bnx2_write_phy(bp, 0x10, val | 0x1);
+ }
+ else {
+ u32 val;
+
+ bnx2_write_phy(bp, 0x18, 0x7);
+ bnx2_read_phy(bp, 0x18, &val);
+ bnx2_write_phy(bp, 0x18, val & ~0x4007);
+
+ bnx2_read_phy(bp, 0x10, &val);
+ bnx2_write_phy(bp, 0x10, val & ~0x1);
+ }
+
+ return 0;
+}
+
+
+static int
+bnx2_init_phy(struct bnx2 *bp)
+{
+ u32 val;
+ int rc = 0;
+
+ bp->phy_flags &= ~PHY_INT_MODE_MASK_FLAG;
+ bp->phy_flags |= PHY_INT_MODE_LINK_READY_FLAG;
+
+ REG_WR(bp, BNX2_EMAC_ATTENTION_ENA, BNX2_EMAC_ATTENTION_ENA_LINK);
+
+ bnx2_reset_phy(bp);
+
+ bnx2_read_phy(bp, MII_PHYSID1, &val);
+ bp->phy_id = val << 16;
+ bnx2_read_phy(bp, MII_PHYSID2, &val);
+ bp->phy_id |= val & 0xffff;
+
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ rc = bnx2_init_serdes_phy(bp);
+ }
+ else {
+ rc = bnx2_init_copper_phy(bp);
+ }
+
+ bnx2_setup_phy(bp);
+
+ return rc;
+}
+
+static int
+bnx2_set_mac_loopback(struct bnx2 *bp)
+{
+ u32 mac_mode;
+
+ mac_mode = REG_RD(bp, BNX2_EMAC_MODE);
+ mac_mode &= ~BNX2_EMAC_MODE_PORT;
+ mac_mode |= BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK;
+ REG_WR(bp, BNX2_EMAC_MODE, mac_mode);
+ bp->link_up = 1;
+ return 0;
+}
+
+static int
+bnx2_fw_sync(struct bnx2 *bp, u32 msg_data)
+{
+ int i;
+ u32 val;
+
+ if (bp->fw_timed_out)
+ return -EBUSY;
+
+ bp->fw_wr_seq++;
+ msg_data |= bp->fw_wr_seq;
+
+ REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data);
+
+ /* wait for an acknowledgement. */
+ for (i = 0; i < (FW_ACK_TIME_OUT_MS * 1000)/5; i++) {
+ udelay(5);
+
+ val = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_FW_MB);
+
+ if ((val & BNX2_FW_MSG_ACK) == (msg_data & BNX2_DRV_MSG_SEQ))
+ break;
+ }
+
+ /* If we timed out, inform the firmware that this is the case. */
+ if (((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) &&
+ ((msg_data & BNX2_DRV_MSG_DATA) != BNX2_DRV_MSG_DATA_WAIT0)) {
+
+ msg_data &= ~BNX2_DRV_MSG_CODE;
+ msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT;
+
+ REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data);
+
+ bp->fw_timed_out = 1;
+
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static void
+bnx2_init_context(struct bnx2 *bp)
+{
+ u32 vcid;
+
+ vcid = 96;
+ while (vcid) {
+ u32 vcid_addr, pcid_addr, offset;
+
+ vcid--;
+
+ if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
+ u32 new_vcid;
+
+ vcid_addr = GET_PCID_ADDR(vcid);
+ if (vcid & 0x8) {
+ new_vcid = 0x60 + (vcid & 0xf0) + (vcid & 0x7);
+ }
+ else {
+ new_vcid = vcid;
+ }
+ pcid_addr = GET_PCID_ADDR(new_vcid);
+ }
+ else {
+ vcid_addr = GET_CID_ADDR(vcid);
+ pcid_addr = vcid_addr;
+ }
+
+ REG_WR(bp, BNX2_CTX_VIRT_ADDR, 0x00);
+ REG_WR(bp, BNX2_CTX_PAGE_TBL, pcid_addr);
+
+ /* Zero out the context. */
+ for (offset = 0; offset < PHY_CTX_SIZE; offset += 4) {
+ CTX_WR(bp, 0x00, offset, 0);
+ }
+
+ REG_WR(bp, BNX2_CTX_VIRT_ADDR, vcid_addr);
+ REG_WR(bp, BNX2_CTX_PAGE_TBL, pcid_addr);
+ }
+}
+
+static int
+bnx2_alloc_bad_rbuf(struct bnx2 *bp)
+{
+ u16 *good_mbuf;
+ u32 good_mbuf_cnt;
+ u32 val;
+
+ good_mbuf = kmalloc(512 * sizeof(u16), GFP_KERNEL);
+ if (good_mbuf == NULL) {
+ printk(KERN_ERR PFX "Failed to allocate memory in "
+ "bnx2_alloc_bad_rbuf\n");
+ return -ENOMEM;
+ }
+
+ REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS,
+ BNX2_MISC_ENABLE_SET_BITS_RX_MBUF_ENABLE);
+
+ good_mbuf_cnt = 0;
+
+ /* Allocate a bunch of mbufs and save the good ones in an array. */
+ val = REG_RD_IND(bp, BNX2_RBUF_STATUS1);
+ while (val & BNX2_RBUF_STATUS1_FREE_COUNT) {
+ REG_WR_IND(bp, BNX2_RBUF_COMMAND, BNX2_RBUF_COMMAND_ALLOC_REQ);
+
+ val = REG_RD_IND(bp, BNX2_RBUF_FW_BUF_ALLOC);
+
+ val &= BNX2_RBUF_FW_BUF_ALLOC_VALUE;
+
+ /* The addresses with Bit 9 set are bad memory blocks. */
+ if (!(val & (1 << 9))) {
+ good_mbuf[good_mbuf_cnt] = (u16) val;
+ good_mbuf_cnt++;
+ }
+
+ val = REG_RD_IND(bp, BNX2_RBUF_STATUS1);
+ }
+
+ /* Free the good ones back to the mbuf pool thus discarding
+ * all the bad ones. */
+ while (good_mbuf_cnt) {
+ good_mbuf_cnt--;
+
+ val = good_mbuf[good_mbuf_cnt];
+ val = (val << 9) | val | 1;
+
+ REG_WR_IND(bp, BNX2_RBUF_FW_BUF_FREE, val);
+ }
+ kfree(good_mbuf);
+ return 0;
+}
+
+static void
+bnx2_set_mac_addr(struct bnx2 *bp)
+{
+ u32 val;
+ u8 *mac_addr = bp->dev->dev_addr;
+
+ val = (mac_addr[0] << 8) | mac_addr[1];
+
+ REG_WR(bp, BNX2_EMAC_MAC_MATCH0, val);
+
+ val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
+ (mac_addr[4] << 8) | mac_addr[5];
+
+ REG_WR(bp, BNX2_EMAC_MAC_MATCH1, val);
+}
+
+static inline int
+bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index)
+{
+ struct sk_buff *skb;
+ struct sw_bd *rx_buf = &bp->rx_buf_ring[index];
+ dma_addr_t mapping;
+ struct rx_bd *rxbd = &bp->rx_desc_ring[index];
+ unsigned long align;
+
+ skb = dev_alloc_skb(bp->rx_buf_size);
+ if (skb == NULL) {
+ return -ENOMEM;
+ }
+
+ if (unlikely((align = (unsigned long) skb->data & 0x7))) {
+ skb_reserve(skb, 8 - align);
+ }
+
+ skb->dev = bp->dev;
+ mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size,
+ PCI_DMA_FROMDEVICE);
+
+ rx_buf->skb = skb;
+ pci_unmap_addr_set(rx_buf, mapping, mapping);
+
+ rxbd->rx_bd_haddr_hi = (u64) mapping >> 32;
+ rxbd->rx_bd_haddr_lo = (u64) mapping & 0xffffffff;
+
+ bp->rx_prod_bseq += bp->rx_buf_use_size;
+
+ return 0;
+}
+
+static void
+bnx2_phy_int(struct bnx2 *bp)
+{
+ u32 new_link_state, old_link_state;
+
+ new_link_state = bp->status_blk->status_attn_bits &
+ STATUS_ATTN_BITS_LINK_STATE;
+ old_link_state = bp->status_blk->status_attn_bits_ack &
+ STATUS_ATTN_BITS_LINK_STATE;
+ if (new_link_state != old_link_state) {
+ if (new_link_state) {
+ REG_WR(bp, BNX2_PCICFG_STATUS_BIT_SET_CMD,
+ STATUS_ATTN_BITS_LINK_STATE);
+ }
+ else {
+ REG_WR(bp, BNX2_PCICFG_STATUS_BIT_CLEAR_CMD,
+ STATUS_ATTN_BITS_LINK_STATE);
+ }
+ bnx2_set_link(bp);
+ }
+}
+
+static void
+bnx2_tx_int(struct bnx2 *bp)
+{
+ u16 hw_cons, sw_cons, sw_ring_cons;
+ int tx_free_bd = 0;
+
+ hw_cons = bp->status_blk->status_tx_quick_consumer_index0;
+ if ((hw_cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT) {
+ hw_cons++;
+ }
+ sw_cons = bp->tx_cons;
+
+ while (sw_cons != hw_cons) {
+ struct sw_bd *tx_buf;
+ struct sk_buff *skb;
+ int i, last;
+
+ sw_ring_cons = TX_RING_IDX(sw_cons);
+
+ tx_buf = &bp->tx_buf_ring[sw_ring_cons];
+ skb = tx_buf->skb;
+#ifdef BCM_TSO
+ /* partial BD completions possible with TSO packets */
+ if (skb_shinfo(skb)->tso_size) {
+ u16 last_idx, last_ring_idx;
+
+ last_idx = sw_cons +
+ skb_shinfo(skb)->nr_frags + 1;
+ last_ring_idx = sw_ring_cons +
+ skb_shinfo(skb)->nr_frags + 1;
+ if (unlikely(last_ring_idx >= MAX_TX_DESC_CNT)) {
+ last_idx++;
+ }
+ if (((s16) ((s16) last_idx - (s16) hw_cons)) > 0) {
+ break;
+ }
+ }
+#endif
+ pci_unmap_single(bp->pdev, pci_unmap_addr(tx_buf, mapping),
+ skb_headlen(skb), PCI_DMA_TODEVICE);
+
+ tx_buf->skb = NULL;
+ last = skb_shinfo(skb)->nr_frags;
+
+ for (i = 0; i < last; i++) {
+ sw_cons = NEXT_TX_BD(sw_cons);
+
+ pci_unmap_page(bp->pdev,
+ pci_unmap_addr(
+ &bp->tx_buf_ring[TX_RING_IDX(sw_cons)],
+ mapping),
+ skb_shinfo(skb)->frags[i].size,
+ PCI_DMA_TODEVICE);
+ }
+
+ sw_cons = NEXT_TX_BD(sw_cons);
+
+ tx_free_bd += last + 1;
+
+ dev_kfree_skb_irq(skb);
+
+ hw_cons = bp->status_blk->status_tx_quick_consumer_index0;
+ if ((hw_cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT) {
+ hw_cons++;
+ }
+ }
+
+ atomic_add(tx_free_bd, &bp->tx_avail_bd);
+
+ if (unlikely(netif_queue_stopped(bp->dev))) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&bp->tx_lock, flags);
+ if ((netif_queue_stopped(bp->dev)) &&
+ (atomic_read(&bp->tx_avail_bd) > MAX_SKB_FRAGS)) {
+
+ netif_wake_queue(bp->dev);
+ }
+ spin_unlock_irqrestore(&bp->tx_lock, flags);
+ }
+
+ bp->tx_cons = sw_cons;
+
+}
+
+static inline void
+bnx2_reuse_rx_skb(struct bnx2 *bp, struct sk_buff *skb,
+ u16 cons, u16 prod)
+{
+ struct sw_bd *cons_rx_buf = &bp->rx_buf_ring[cons];
+ struct sw_bd *prod_rx_buf = &bp->rx_buf_ring[prod];
+ struct rx_bd *cons_bd = &bp->rx_desc_ring[cons];
+ struct rx_bd *prod_bd = &bp->rx_desc_ring[prod];
+
+ pci_dma_sync_single_for_device(bp->pdev,
+ pci_unmap_addr(cons_rx_buf, mapping),
+ bp->rx_offset + RX_COPY_THRESH, PCI_DMA_FROMDEVICE);
+
+ prod_rx_buf->skb = cons_rx_buf->skb;
+ pci_unmap_addr_set(prod_rx_buf, mapping,
+ pci_unmap_addr(cons_rx_buf, mapping));
+
+ memcpy(prod_bd, cons_bd, 8);
+
+ bp->rx_prod_bseq += bp->rx_buf_use_size;
+
+}
+
+static int
+bnx2_rx_int(struct bnx2 *bp, int budget)
+{
+ u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod;
+ struct l2_fhdr *rx_hdr;
+ int rx_pkt = 0;
+
+ hw_cons = bp->status_blk->status_rx_quick_consumer_index0;
+ if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) {
+ hw_cons++;
+ }
+ sw_cons = bp->rx_cons;
+ sw_prod = bp->rx_prod;
+
+ /* Memory barrier necessary as speculative reads of the rx
+ * buffer can be ahead of the index in the status block
+ */
+ rmb();
+ while (sw_cons != hw_cons) {
+ unsigned int len;
+ u16 status;
+ struct sw_bd *rx_buf;
+ struct sk_buff *skb;
+
+ sw_ring_cons = RX_RING_IDX(sw_cons);
+ sw_ring_prod = RX_RING_IDX(sw_prod);
+
+ rx_buf = &bp->rx_buf_ring[sw_ring_cons];
+ skb = rx_buf->skb;
+ pci_dma_sync_single_for_cpu(bp->pdev,
+ pci_unmap_addr(rx_buf, mapping),
+ bp->rx_offset + RX_COPY_THRESH, PCI_DMA_FROMDEVICE);
+
+ rx_hdr = (struct l2_fhdr *) skb->data;
+ len = rx_hdr->l2_fhdr_pkt_len - 4;
+
+ if (rx_hdr->l2_fhdr_errors &
+ (L2_FHDR_ERRORS_BAD_CRC |
+ L2_FHDR_ERRORS_PHY_DECODE |
+ L2_FHDR_ERRORS_ALIGNMENT |
+ L2_FHDR_ERRORS_TOO_SHORT |
+ L2_FHDR_ERRORS_GIANT_FRAME)) {
+
+ goto reuse_rx;
+ }
+
+ /* Since we don't have a jumbo ring, copy small packets
+ * if mtu > 1500
+ */
+ if ((bp->dev->mtu > 1500) && (len <= RX_COPY_THRESH)) {
+ struct sk_buff *new_skb;
+
+ new_skb = dev_alloc_skb(len + 2);
+ if (new_skb == NULL)
+ goto reuse_rx;
+
+ /* aligned copy */
+ memcpy(new_skb->data,
+ skb->data + bp->rx_offset - 2,
+ len + 2);
+
+ skb_reserve(new_skb, 2);
+ skb_put(new_skb, len);
+ new_skb->dev = bp->dev;
+
+ bnx2_reuse_rx_skb(bp, skb,
+ sw_ring_cons, sw_ring_prod);
+
+ skb = new_skb;
+ }
+ else if (bnx2_alloc_rx_skb(bp, sw_ring_prod) == 0) {
+ pci_unmap_single(bp->pdev,
+ pci_unmap_addr(rx_buf, mapping),
+ bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
+
+ skb_reserve(skb, bp->rx_offset);
+ skb_put(skb, len);
+ }
+ else {
+reuse_rx:
+ bnx2_reuse_rx_skb(bp, skb,
+ sw_ring_cons, sw_ring_prod);
+ goto next_rx;
+ }
+
+ skb->protocol = eth_type_trans(skb, bp->dev);
+
+ if ((len > (bp->dev->mtu + ETH_HLEN)) &&
+ (htons(skb->protocol) != 0x8100)) {
+
+ dev_kfree_skb_irq(skb);
+ goto next_rx;
+
+ }
+
+ status = rx_hdr->l2_fhdr_status;
+ skb->ip_summed = CHECKSUM_NONE;
+ if (bp->rx_csum &&
+ (status & (L2_FHDR_STATUS_TCP_SEGMENT |
+ L2_FHDR_STATUS_UDP_DATAGRAM))) {
+
+ u16 cksum = rx_hdr->l2_fhdr_tcp_udp_xsum;
+
+ if (cksum == 0xffff)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ }
+
+#ifdef BCM_VLAN
+ if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) && (bp->vlgrp != 0)) {
+ vlan_hwaccel_receive_skb(skb, bp->vlgrp,
+ rx_hdr->l2_fhdr_vlan_tag);
+ }
+ else
+#endif
+ netif_receive_skb(skb);
+
+ bp->dev->last_rx = jiffies;
+ rx_pkt++;
+
+next_rx:
+ rx_buf->skb = NULL;
+
+ sw_cons = NEXT_RX_BD(sw_cons);
+ sw_prod = NEXT_RX_BD(sw_prod);
+
+ if ((rx_pkt == budget))
+ break;
+ }
+ bp->rx_cons = sw_cons;
+ bp->rx_prod = sw_prod;
+
+ REG_WR16(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BDIDX, sw_prod);
+
+ REG_WR(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BSEQ, bp->rx_prod_bseq);
+
+ mmiowb();
+
+ return rx_pkt;
+
+}
+
+/* MSI ISR - The only difference between this and the INTx ISR
+ * is that the MSI interrupt is always serviced.
+ */
+static irqreturn_t
+bnx2_msi(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_instance;
+ struct bnx2 *bp = dev->priv;
+
+ REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
+ BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM |
+ BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
+
+ /* Return here if interrupt is disabled. */
+ if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
+ return IRQ_RETVAL(1);
+ }
+
+ if (netif_rx_schedule_prep(dev)) {
+ __netif_rx_schedule(dev);
+ }
+
+ return IRQ_RETVAL(1);
+}
+
+static irqreturn_t
+bnx2_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_instance;
+ struct bnx2 *bp = dev->priv;
+
+ /* When using INTx, it is possible for the interrupt to arrive
+ * at the CPU before the status block posted prior to the
+ * interrupt. Reading a register will flush the status block.
+ * When using MSI, the MSI message will always complete after
+ * the status block write.
+ */
+ if ((bp->status_blk->status_idx == bp->last_status_idx) ||
+ (REG_RD(bp, BNX2_PCICFG_MISC_STATUS) &
+ BNX2_PCICFG_MISC_STATUS_INTA_VALUE))
+ return IRQ_RETVAL(0);
+
+ REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
+ BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM |
+ BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
+
+ /* Return here if interrupt is shared and is disabled. */
+ if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
+ return IRQ_RETVAL(1);
+ }
+
+ if (netif_rx_schedule_prep(dev)) {
+ __netif_rx_schedule(dev);
+ }
+
+ return IRQ_RETVAL(1);
+}
+
+static int
+bnx2_poll(struct net_device *dev, int *budget)
+{
+ struct bnx2 *bp = dev->priv;
+ int rx_done = 1;
+
+ bp->last_status_idx = bp->status_blk->status_idx;
+
+ rmb();
+ if ((bp->status_blk->status_attn_bits &
+ STATUS_ATTN_BITS_LINK_STATE) !=
+ (bp->status_blk->status_attn_bits_ack &
+ STATUS_ATTN_BITS_LINK_STATE)) {
+
+ unsigned long flags;
+
+ spin_lock_irqsave(&bp->phy_lock, flags);
+ bnx2_phy_int(bp);
+ spin_unlock_irqrestore(&bp->phy_lock, flags);
+ }
+
+ if (bp->status_blk->status_tx_quick_consumer_index0 != bp->tx_cons) {
+ bnx2_tx_int(bp);
+ }
+
+ if (bp->status_blk->status_rx_quick_consumer_index0 != bp->rx_cons) {
+ int orig_budget = *budget;
+ int work_done;
+
+ if (orig_budget > dev->quota)
+ orig_budget = dev->quota;
+
+ work_done = bnx2_rx_int(bp, orig_budget);
+ *budget -= work_done;
+ dev->quota -= work_done;
+
+ if (work_done >= orig_budget) {
+ rx_done = 0;
+ }
+ }
+
+ if (rx_done) {
+ netif_rx_complete(dev);
+ REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
+ BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
+ bp->last_status_idx);
+ return 0;
+ }
+
+ return 1;
+}
+
+/* Called with rtnl_lock from vlan functions and also dev->xmit_lock
+ * from set_multicast.
+ */
+static void
+bnx2_set_rx_mode(struct net_device *dev)
+{
+ struct bnx2 *bp = dev->priv;
+ u32 rx_mode, sort_mode;
+ int i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bp->phy_lock, flags);
+
+ rx_mode = bp->rx_mode & ~(BNX2_EMAC_RX_MODE_PROMISCUOUS |
+ BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG);
+ sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN;
+#ifdef BCM_VLAN
+ if (!bp->vlgrp) {
+ rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
+ }
+#else
+ rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
+#endif
+ if (dev->flags & IFF_PROMISC) {
+ /* Promiscuous mode. */
+ rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS;
+ sort_mode |= BNX2_RPM_SORT_USER0_PROM_EN;
+ }
+ else if (dev->flags & IFF_ALLMULTI) {
+ for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) {
+ REG_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4),
+ 0xffffffff);
+ }
+ sort_mode |= BNX2_RPM_SORT_USER0_MC_EN;
+ }
+ else {
+ /* Accept one or more multicast(s). */
+ struct dev_mc_list *mclist;
+ u32 mc_filter[NUM_MC_HASH_REGISTERS];
+ u32 regidx;
+ u32 bit;
+ u32 crc;
+
+ memset(mc_filter, 0, 4 * NUM_MC_HASH_REGISTERS);
+
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+
+ crc = ether_crc_le(ETH_ALEN, mclist->dmi_addr);
+ bit = crc & 0xff;
+ regidx = (bit & 0xe0) >> 5;
+ bit &= 0x1f;
+ mc_filter[regidx] |= (1 << bit);
+ }
+
+ for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) {
+ REG_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4),
+ mc_filter[i]);
+ }
+
+ sort_mode |= BNX2_RPM_SORT_USER0_MC_HSH_EN;
+ }
+
+ if (rx_mode != bp->rx_mode) {
+ bp->rx_mode = rx_mode;
+ REG_WR(bp, BNX2_EMAC_RX_MODE, rx_mode);
+ }
+
+ REG_WR(bp, BNX2_RPM_SORT_USER0, 0x0);
+ REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode);
+ REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode | BNX2_RPM_SORT_USER0_ENA);
+
+ spin_unlock_irqrestore(&bp->phy_lock, flags);
+}
+
+static void
+load_rv2p_fw(struct bnx2 *bp, u32 *rv2p_code, u32 rv2p_code_len,
+ u32 rv2p_proc)
+{
+ int i;
+ u32 val;
+
+
+ for (i = 0; i < rv2p_code_len; i += 8) {
+ REG_WR(bp, BNX2_RV2P_INSTR_HIGH, *rv2p_code);
+ rv2p_code++;
+ REG_WR(bp, BNX2_RV2P_INSTR_LOW, *rv2p_code);
+ rv2p_code++;
+
+ if (rv2p_proc == RV2P_PROC1) {
+ val = (i / 8) | BNX2_RV2P_PROC1_ADDR_CMD_RDWR;
+ REG_WR(bp, BNX2_RV2P_PROC1_ADDR_CMD, val);
+ }
+ else {
+ val = (i / 8) | BNX2_RV2P_PROC2_ADDR_CMD_RDWR;
+ REG_WR(bp, BNX2_RV2P_PROC2_ADDR_CMD, val);
+ }
+ }
+
+ /* Reset the processor, un-stall is done later. */
+ if (rv2p_proc == RV2P_PROC1) {
+ REG_WR(bp, BNX2_RV2P_COMMAND, BNX2_RV2P_COMMAND_PROC1_RESET);
+ }
+ else {
+ REG_WR(bp, BNX2_RV2P_COMMAND, BNX2_RV2P_COMMAND_PROC2_RESET);
+ }
+}
+
+static void
+load_cpu_fw(struct bnx2 *bp, struct cpu_reg *cpu_reg, struct fw_info *fw)
+{
+ u32 offset;
+ u32 val;
+
+ /* Halt the CPU. */
+ val = REG_RD_IND(bp, cpu_reg->mode);
+ val |= cpu_reg->mode_value_halt;
+ REG_WR_IND(bp, cpu_reg->mode, val);
+ REG_WR_IND(bp, cpu_reg->state, cpu_reg->state_value_clear);
+
+ /* Load the Text area. */
+ offset = cpu_reg->spad_base + (fw->text_addr - cpu_reg->mips_view_base);
+ if (fw->text) {
+ int j;
+
+ for (j = 0; j < (fw->text_len / 4); j++, offset += 4) {
+ REG_WR_IND(bp, offset, fw->text[j]);
+ }
+ }
+
+ /* Load the Data area. */
+ offset = cpu_reg->spad_base + (fw->data_addr - cpu_reg->mips_view_base);
+ if (fw->data) {
+ int j;
+
+ for (j = 0; j < (fw->data_len / 4); j++, offset += 4) {
+ REG_WR_IND(bp, offset, fw->data[j]);
+ }
+ }
+
+ /* Load the SBSS area. */
+ offset = cpu_reg->spad_base + (fw->sbss_addr - cpu_reg->mips_view_base);
+ if (fw->sbss) {
+ int j;
+
+ for (j = 0; j < (fw->sbss_len / 4); j++, offset += 4) {
+ REG_WR_IND(bp, offset, fw->sbss[j]);
+ }
+ }
+
+ /* Load the BSS area. */
+ offset = cpu_reg->spad_base + (fw->bss_addr - cpu_reg->mips_view_base);
+ if (fw->bss) {
+ int j;
+
+ for (j = 0; j < (fw->bss_len/4); j++, offset += 4) {
+ REG_WR_IND(bp, offset, fw->bss[j]);
+ }
+ }
+
+ /* Load the Read-Only area. */
+ offset = cpu_reg->spad_base +
+ (fw->rodata_addr - cpu_reg->mips_view_base);
+ if (fw->rodata) {
+ int j;
+
+ for (j = 0; j < (fw->rodata_len / 4); j++, offset += 4) {
+ REG_WR_IND(bp, offset, fw->rodata[j]);
+ }
+ }
+
+ /* Clear the pre-fetch instruction. */
+ REG_WR_IND(bp, cpu_reg->inst, 0);
+ REG_WR_IND(bp, cpu_reg->pc, fw->start_addr);
+
+ /* Start the CPU. */
+ val = REG_RD_IND(bp, cpu_reg->mode);
+ val &= ~cpu_reg->mode_value_halt;
+ REG_WR_IND(bp, cpu_reg->state, cpu_reg->state_value_clear);
+ REG_WR_IND(bp, cpu_reg->mode, val);
+}
+
+static void
+bnx2_init_cpus(struct bnx2 *bp)
+{
+ struct cpu_reg cpu_reg;
+ struct fw_info fw;
+
+ /* Initialize the RV2P processor. */
+ load_rv2p_fw(bp, bnx2_rv2p_proc1, sizeof(bnx2_rv2p_proc1), RV2P_PROC1);
+ load_rv2p_fw(bp, bnx2_rv2p_proc2, sizeof(bnx2_rv2p_proc2), RV2P_PROC2);
+
+ /* Initialize the RX Processor. */
+ cpu_reg.mode = BNX2_RXP_CPU_MODE;
+ cpu_reg.mode_value_halt = BNX2_RXP_CPU_MODE_SOFT_HALT;
+ cpu_reg.mode_value_sstep = BNX2_RXP_CPU_MODE_STEP_ENA;
+ cpu_reg.state = BNX2_RXP_CPU_STATE;
+ cpu_reg.state_value_clear = 0xffffff;
+ cpu_reg.gpr0 = BNX2_RXP_CPU_REG_FILE;
+ cpu_reg.evmask = BNX2_RXP_CPU_EVENT_MASK;
+ cpu_reg.pc = BNX2_RXP_CPU_PROGRAM_COUNTER;
+ cpu_reg.inst = BNX2_RXP_CPU_INSTRUCTION;
+ cpu_reg.bp = BNX2_RXP_CPU_HW_BREAKPOINT;
+ cpu_reg.spad_base = BNX2_RXP_SCRATCH;
+ cpu_reg.mips_view_base = 0x8000000;
+
+ fw.ver_major = bnx2_RXP_b06FwReleaseMajor;
+ fw.ver_minor = bnx2_RXP_b06FwReleaseMinor;
+ fw.ver_fix = bnx2_RXP_b06FwReleaseFix;
+ fw.start_addr = bnx2_RXP_b06FwStartAddr;
+
+ fw.text_addr = bnx2_RXP_b06FwTextAddr;
+ fw.text_len = bnx2_RXP_b06FwTextLen;
+ fw.text_index = 0;
+ fw.text = bnx2_RXP_b06FwText;
+
+ fw.data_addr = bnx2_RXP_b06FwDataAddr;
+ fw.data_len = bnx2_RXP_b06FwDataLen;
+ fw.data_index = 0;
+ fw.data = bnx2_RXP_b06FwData;
+
+ fw.sbss_addr = bnx2_RXP_b06FwSbssAddr;
+ fw.sbss_len = bnx2_RXP_b06FwSbssLen;
+ fw.sbss_index = 0;
+ fw.sbss = bnx2_RXP_b06FwSbss;
+
+ fw.bss_addr = bnx2_RXP_b06FwBssAddr;
+ fw.bss_len = bnx2_RXP_b06FwBssLen;
+ fw.bss_index = 0;
+ fw.bss = bnx2_RXP_b06FwBss;
+
+ fw.rodata_addr = bnx2_RXP_b06FwRodataAddr;
+ fw.rodata_len = bnx2_RXP_b06FwRodataLen;
+ fw.rodata_index = 0;
+ fw.rodata = bnx2_RXP_b06FwRodata;
+
+ load_cpu_fw(bp, &cpu_reg, &fw);
+
+ /* Initialize the TX Processor. */
+ cpu_reg.mode = BNX2_TXP_CPU_MODE;
+ cpu_reg.mode_value_halt = BNX2_TXP_CPU_MODE_SOFT_HALT;
+ cpu_reg.mode_value_sstep = BNX2_TXP_CPU_MODE_STEP_ENA;
+ cpu_reg.state = BNX2_TXP_CPU_STATE;
+ cpu_reg.state_value_clear = 0xffffff;
+ cpu_reg.gpr0 = BNX2_TXP_CPU_REG_FILE;
+ cpu_reg.evmask = BNX2_TXP_CPU_EVENT_MASK;
+ cpu_reg.pc = BNX2_TXP_CPU_PROGRAM_COUNTER;
+ cpu_reg.inst = BNX2_TXP_CPU_INSTRUCTION;
+ cpu_reg.bp = BNX2_TXP_CPU_HW_BREAKPOINT;
+ cpu_reg.spad_base = BNX2_TXP_SCRATCH;
+ cpu_reg.mips_view_base = 0x8000000;
+
+ fw.ver_major = bnx2_TXP_b06FwReleaseMajor;
+ fw.ver_minor = bnx2_TXP_b06FwReleaseMinor;
+ fw.ver_fix = bnx2_TXP_b06FwReleaseFix;
+ fw.start_addr = bnx2_TXP_b06FwStartAddr;
+
+ fw.text_addr = bnx2_TXP_b06FwTextAddr;
+ fw.text_len = bnx2_TXP_b06FwTextLen;
+ fw.text_index = 0;
+ fw.text = bnx2_TXP_b06FwText;
+
+ fw.data_addr = bnx2_TXP_b06FwDataAddr;
+ fw.data_len = bnx2_TXP_b06FwDataLen;
+ fw.data_index = 0;
+ fw.data = bnx2_TXP_b06FwData;
+
+ fw.sbss_addr = bnx2_TXP_b06FwSbssAddr;
+ fw.sbss_len = bnx2_TXP_b06FwSbssLen;
+ fw.sbss_index = 0;
+ fw.sbss = bnx2_TXP_b06FwSbss;
+
+ fw.bss_addr = bnx2_TXP_b06FwBssAddr;
+ fw.bss_len = bnx2_TXP_b06FwBssLen;
+ fw.bss_index = 0;
+ fw.bss = bnx2_TXP_b06FwBss;
+
+ fw.rodata_addr = bnx2_TXP_b06FwRodataAddr;
+ fw.rodata_len = bnx2_TXP_b06FwRodataLen;
+ fw.rodata_index = 0;
+ fw.rodata = bnx2_TXP_b06FwRodata;
+
+ load_cpu_fw(bp, &cpu_reg, &fw);
+
+ /* Initialize the TX Patch-up Processor. */
+ cpu_reg.mode = BNX2_TPAT_CPU_MODE;
+ cpu_reg.mode_value_halt = BNX2_TPAT_CPU_MODE_SOFT_HALT;
+ cpu_reg.mode_value_sstep = BNX2_TPAT_CPU_MODE_STEP_ENA;
+ cpu_reg.state = BNX2_TPAT_CPU_STATE;
+ cpu_reg.state_value_clear = 0xffffff;
+ cpu_reg.gpr0 = BNX2_TPAT_CPU_REG_FILE;
+ cpu_reg.evmask = BNX2_TPAT_CPU_EVENT_MASK;
+ cpu_reg.pc = BNX2_TPAT_CPU_PROGRAM_COUNTER;
+ cpu_reg.inst = BNX2_TPAT_CPU_INSTRUCTION;
+ cpu_reg.bp = BNX2_TPAT_CPU_HW_BREAKPOINT;
+ cpu_reg.spad_base = BNX2_TPAT_SCRATCH;
+ cpu_reg.mips_view_base = 0x8000000;
+
+ fw.ver_major = bnx2_TPAT_b06FwReleaseMajor;
+ fw.ver_minor = bnx2_TPAT_b06FwReleaseMinor;
+ fw.ver_fix = bnx2_TPAT_b06FwReleaseFix;
+ fw.start_addr = bnx2_TPAT_b06FwStartAddr;
+
+ fw.text_addr = bnx2_TPAT_b06FwTextAddr;
+ fw.text_len = bnx2_TPAT_b06FwTextLen;
+ fw.text_index = 0;
+ fw.text = bnx2_TPAT_b06FwText;
+
+ fw.data_addr = bnx2_TPAT_b06FwDataAddr;
+ fw.data_len = bnx2_TPAT_b06FwDataLen;
+ fw.data_index = 0;
+ fw.data = bnx2_TPAT_b06FwData;
+
+ fw.sbss_addr = bnx2_TPAT_b06FwSbssAddr;
+ fw.sbss_len = bnx2_TPAT_b06FwSbssLen;
+ fw.sbss_index = 0;
+ fw.sbss = bnx2_TPAT_b06FwSbss;
+
+ fw.bss_addr = bnx2_TPAT_b06FwBssAddr;
+ fw.bss_len = bnx2_TPAT_b06FwBssLen;
+ fw.bss_index = 0;
+ fw.bss = bnx2_TPAT_b06FwBss;
+
+ fw.rodata_addr = bnx2_TPAT_b06FwRodataAddr;
+ fw.rodata_len = bnx2_TPAT_b06FwRodataLen;
+ fw.rodata_index = 0;
+ fw.rodata = bnx2_TPAT_b06FwRodata;
+
+ load_cpu_fw(bp, &cpu_reg, &fw);
+
+ /* Initialize the Completion Processor. */
+ cpu_reg.mode = BNX2_COM_CPU_MODE;
+ cpu_reg.mode_value_halt = BNX2_COM_CPU_MODE_SOFT_HALT;
+ cpu_reg.mode_value_sstep = BNX2_COM_CPU_MODE_STEP_ENA;
+ cpu_reg.state = BNX2_COM_CPU_STATE;
+ cpu_reg.state_value_clear = 0xffffff;
+ cpu_reg.gpr0 = BNX2_COM_CPU_REG_FILE;
+ cpu_reg.evmask = BNX2_COM_CPU_EVENT_MASK;
+ cpu_reg.pc = BNX2_COM_CPU_PROGRAM_COUNTER;
+ cpu_reg.inst = BNX2_COM_CPU_INSTRUCTION;
+ cpu_reg.bp = BNX2_COM_CPU_HW_BREAKPOINT;
+ cpu_reg.spad_base = BNX2_COM_SCRATCH;
+ cpu_reg.mips_view_base = 0x8000000;
+
+ fw.ver_major = bnx2_COM_b06FwReleaseMajor;
+ fw.ver_minor = bnx2_COM_b06FwReleaseMinor;
+ fw.ver_fix = bnx2_COM_b06FwReleaseFix;
+ fw.start_addr = bnx2_COM_b06FwStartAddr;
+
+ fw.text_addr = bnx2_COM_b06FwTextAddr;
+ fw.text_len = bnx2_COM_b06FwTextLen;
+ fw.text_index = 0;
+ fw.text = bnx2_COM_b06FwText;
+
+ fw.data_addr = bnx2_COM_b06FwDataAddr;
+ fw.data_len = bnx2_COM_b06FwDataLen;
+ fw.data_index = 0;
+ fw.data = bnx2_COM_b06FwData;
+
+ fw.sbss_addr = bnx2_COM_b06FwSbssAddr;
+ fw.sbss_len = bnx2_COM_b06FwSbssLen;
+ fw.sbss_index = 0;
+ fw.sbss = bnx2_COM_b06FwSbss;
+
+ fw.bss_addr = bnx2_COM_b06FwBssAddr;
+ fw.bss_len = bnx2_COM_b06FwBssLen;
+ fw.bss_index = 0;
+ fw.bss = bnx2_COM_b06FwBss;
+
+ fw.rodata_addr = bnx2_COM_b06FwRodataAddr;
+ fw.rodata_len = bnx2_COM_b06FwRodataLen;
+ fw.rodata_index = 0;
+ fw.rodata = bnx2_COM_b06FwRodata;
+
+ load_cpu_fw(bp, &cpu_reg, &fw);
+
+}
+
+static int
+bnx2_set_power_state(struct bnx2 *bp, int state)
+{
+ u16 pmcsr;
+
+ pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmcsr);
+
+ switch (state) {
+ case 0: {
+ u32 val;
+
+ pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL,
+ (pmcsr & ~PCI_PM_CTRL_STATE_MASK) |
+ PCI_PM_CTRL_PME_STATUS);
+
+ if (pmcsr & PCI_PM_CTRL_STATE_MASK)
+ /* delay required during transition out of D3hot */
+ msleep(20);
+
+ val = REG_RD(bp, BNX2_EMAC_MODE);
+ val |= BNX2_EMAC_MODE_MPKT_RCVD | BNX2_EMAC_MODE_ACPI_RCVD;
+ val &= ~BNX2_EMAC_MODE_MPKT;
+ REG_WR(bp, BNX2_EMAC_MODE, val);
+
+ val = REG_RD(bp, BNX2_RPM_CONFIG);
+ val &= ~BNX2_RPM_CONFIG_ACPI_ENA;
+ REG_WR(bp, BNX2_RPM_CONFIG, val);
+ break;
+ }
+ case 3: {
+ int i;
+ u32 val, wol_msg;
+
+ if (bp->wol) {
+ u32 advertising;
+ u8 autoneg;
+
+ autoneg = bp->autoneg;
+ advertising = bp->advertising;
+
+ bp->autoneg = AUTONEG_SPEED;
+ bp->advertising = ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_Autoneg;
+
+ bnx2_setup_copper_phy(bp);
+
+ bp->autoneg = autoneg;
+ bp->advertising = advertising;
+
+ bnx2_set_mac_addr(bp);
+
+ val = REG_RD(bp, BNX2_EMAC_MODE);
+
+ /* Enable port mode. */
+ val &= ~BNX2_EMAC_MODE_PORT;
+ val |= BNX2_EMAC_MODE_PORT_MII |
+ BNX2_EMAC_MODE_MPKT_RCVD |
+ BNX2_EMAC_MODE_ACPI_RCVD |
+ BNX2_EMAC_MODE_FORCE_LINK |
+ BNX2_EMAC_MODE_MPKT;
+
+ REG_WR(bp, BNX2_EMAC_MODE, val);
+
+ /* receive all multicast */
+ for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) {
+ REG_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4),
+ 0xffffffff);
+ }
+ REG_WR(bp, BNX2_EMAC_RX_MODE,
+ BNX2_EMAC_RX_MODE_SORT_MODE);
+
+ val = 1 | BNX2_RPM_SORT_USER0_BC_EN |
+ BNX2_RPM_SORT_USER0_MC_EN;
+ REG_WR(bp, BNX2_RPM_SORT_USER0, 0x0);
+ REG_WR(bp, BNX2_RPM_SORT_USER0, val);
+ REG_WR(bp, BNX2_RPM_SORT_USER0, val |
+ BNX2_RPM_SORT_USER0_ENA);
+
+ /* Need to enable EMAC and RPM for WOL. */
+ REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS,
+ BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_MAC_ENABLE |
+ BNX2_MISC_ENABLE_SET_BITS_TX_HEADER_Q_ENABLE |
+ BNX2_MISC_ENABLE_SET_BITS_EMAC_ENABLE);
+
+ val = REG_RD(bp, BNX2_RPM_CONFIG);
+ val &= ~BNX2_RPM_CONFIG_ACPI_ENA;
+ REG_WR(bp, BNX2_RPM_CONFIG, val);
+
+ wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_WOL;
+ }
+ else {
+ wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
+ }
+
+ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg);
+
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ if ((CHIP_ID(bp) == CHIP_ID_5706_A0) ||
+ (CHIP_ID(bp) == CHIP_ID_5706_A1)) {
+
+ if (bp->wol)
+ pmcsr |= 3;
+ }
+ else {
+ pmcsr |= 3;
+ }
+ if (bp->wol) {
+ pmcsr |= PCI_PM_CTRL_PME_ENABLE;
+ }
+ pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL,
+ pmcsr);
+
+ /* No more memory access after this point until
+ * device is brought back to D0.
+ */
+ udelay(50);
+ break;
+ }
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int
+bnx2_acquire_nvram_lock(struct bnx2 *bp)
+{
+ u32 val;
+ int j;
+
+ /* Request access to the flash interface. */
+ REG_WR(bp, BNX2_NVM_SW_ARB, BNX2_NVM_SW_ARB_ARB_REQ_SET2);
+ for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
+ val = REG_RD(bp, BNX2_NVM_SW_ARB);
+ if (val & BNX2_NVM_SW_ARB_ARB_ARB2)
+ break;
+
+ udelay(5);
+ }
+
+ if (j >= NVRAM_TIMEOUT_COUNT)
+ return -EBUSY;
+
+ return 0;
+}
+
+static int
+bnx2_release_nvram_lock(struct bnx2 *bp)
+{
+ int j;
+ u32 val;
+
+ /* Relinquish nvram interface. */
+ REG_WR(bp, BNX2_NVM_SW_ARB, BNX2_NVM_SW_ARB_ARB_REQ_CLR2);
+
+ for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
+ val = REG_RD(bp, BNX2_NVM_SW_ARB);
+ if (!(val & BNX2_NVM_SW_ARB_ARB_ARB2))
+ break;
+
+ udelay(5);
+ }
+
+ if (j >= NVRAM_TIMEOUT_COUNT)
+ return -EBUSY;
+
+ return 0;
+}
+
+
+static int
+bnx2_enable_nvram_write(struct bnx2 *bp)
+{
+ u32 val;
+
+ val = REG_RD(bp, BNX2_MISC_CFG);
+ REG_WR(bp, BNX2_MISC_CFG, val | BNX2_MISC_CFG_NVM_WR_EN_PCI);
+
+ if (!bp->flash_info->buffered) {
+ int j;
+
+ REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE);
+ REG_WR(bp, BNX2_NVM_COMMAND,
+ BNX2_NVM_COMMAND_WREN | BNX2_NVM_COMMAND_DOIT);
+
+ for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
+ udelay(5);
+
+ val = REG_RD(bp, BNX2_NVM_COMMAND);
+ if (val & BNX2_NVM_COMMAND_DONE)
+ break;
+ }
+
+ if (j >= NVRAM_TIMEOUT_COUNT)
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static void
+bnx2_disable_nvram_write(struct bnx2 *bp)
+{
+ u32 val;
+
+ val = REG_RD(bp, BNX2_MISC_CFG);
+ REG_WR(bp, BNX2_MISC_CFG, val & ~BNX2_MISC_CFG_NVM_WR_EN);
+}
+
+
+static void
+bnx2_enable_nvram_access(struct bnx2 *bp)
+{
+ u32 val;
+
+ val = REG_RD(bp, BNX2_NVM_ACCESS_ENABLE);
+ /* Enable both bits, even on read. */
+ REG_WR(bp, BNX2_NVM_ACCESS_ENABLE,
+ val | BNX2_NVM_ACCESS_ENABLE_EN | BNX2_NVM_ACCESS_ENABLE_WR_EN);
+}
+
+static void
+bnx2_disable_nvram_access(struct bnx2 *bp)
+{
+ u32 val;
+
+ val = REG_RD(bp, BNX2_NVM_ACCESS_ENABLE);
+ /* Disable both bits, even after read. */
+ REG_WR(bp, BNX2_NVM_ACCESS_ENABLE,
+ val & ~(BNX2_NVM_ACCESS_ENABLE_EN |
+ BNX2_NVM_ACCESS_ENABLE_WR_EN));
+}
+
+static int
+bnx2_nvram_erase_page(struct bnx2 *bp, u32 offset)
+{
+ u32 cmd;
+ int j;
+
+ if (bp->flash_info->buffered)
+ /* Buffered flash, no erase needed */
+ return 0;
+
+ /* Build an erase command */
+ cmd = BNX2_NVM_COMMAND_ERASE | BNX2_NVM_COMMAND_WR |
+ BNX2_NVM_COMMAND_DOIT;
+
+ /* Need to clear DONE bit separately. */
+ REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE);
+
+ /* Address of the NVRAM to read from. */
+ REG_WR(bp, BNX2_NVM_ADDR, offset & BNX2_NVM_ADDR_NVM_ADDR_VALUE);
+
+ /* Issue an erase command. */
+ REG_WR(bp, BNX2_NVM_COMMAND, cmd);
+
+ /* Wait for completion. */
+ for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
+ u32 val;
+
+ udelay(5);
+
+ val = REG_RD(bp, BNX2_NVM_COMMAND);
+ if (val & BNX2_NVM_COMMAND_DONE)
+ break;
+ }
+
+ if (j >= NVRAM_TIMEOUT_COUNT)
+ return -EBUSY;
+
+ return 0;
+}
+
+static int
+bnx2_nvram_read_dword(struct bnx2 *bp, u32 offset, u8 *ret_val, u32 cmd_flags)
+{
+ u32 cmd;
+ int j;
+
+ /* Build the command word. */
+ cmd = BNX2_NVM_COMMAND_DOIT | cmd_flags;
+
+ /* Calculate an offset of a buffered flash. */
+ if (bp->flash_info->buffered) {
+ offset = ((offset / bp->flash_info->page_size) <<
+ bp->flash_info->page_bits) +
+ (offset % bp->flash_info->page_size);
+ }
+
+ /* Need to clear DONE bit separately. */
+ REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE);
+
+ /* Address of the NVRAM to read from. */
+ REG_WR(bp, BNX2_NVM_ADDR, offset & BNX2_NVM_ADDR_NVM_ADDR_VALUE);
+
+ /* Issue a read command. */
+ REG_WR(bp, BNX2_NVM_COMMAND, cmd);
+
+ /* Wait for completion. */
+ for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
+ u32 val;
+
+ udelay(5);
+
+ val = REG_RD(bp, BNX2_NVM_COMMAND);
+ if (val & BNX2_NVM_COMMAND_DONE) {
+ val = REG_RD(bp, BNX2_NVM_READ);
+
+ val = be32_to_cpu(val);
+ memcpy(ret_val, &val, 4);
+ break;
+ }
+ }
+ if (j >= NVRAM_TIMEOUT_COUNT)
+ return -EBUSY;
+
+ return 0;
+}
+
+
+static int
+bnx2_nvram_write_dword(struct bnx2 *bp, u32 offset, u8 *val, u32 cmd_flags)
+{
+ u32 cmd, val32;
+ int j;
+
+ /* Build the command word. */
+ cmd = BNX2_NVM_COMMAND_DOIT | BNX2_NVM_COMMAND_WR | cmd_flags;
+
+ /* Calculate an offset of a buffered flash. */
+ if (bp->flash_info->buffered) {
+ offset = ((offset / bp->flash_info->page_size) <<
+ bp->flash_info->page_bits) +
+ (offset % bp->flash_info->page_size);
+ }
+
+ /* Need to clear DONE bit separately. */
+ REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE);
+
+ memcpy(&val32, val, 4);
+ val32 = cpu_to_be32(val32);
+
+ /* Write the data. */
+ REG_WR(bp, BNX2_NVM_WRITE, val32);
+
+ /* Address of the NVRAM to write to. */
+ REG_WR(bp, BNX2_NVM_ADDR, offset & BNX2_NVM_ADDR_NVM_ADDR_VALUE);
+
+ /* Issue the write command. */
+ REG_WR(bp, BNX2_NVM_COMMAND, cmd);
+
+ /* Wait for completion. */
+ for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
+ udelay(5);
+
+ if (REG_RD(bp, BNX2_NVM_COMMAND) & BNX2_NVM_COMMAND_DONE)
+ break;
+ }
+ if (j >= NVRAM_TIMEOUT_COUNT)
+ return -EBUSY;
+
+ return 0;
+}
+
+static int
+bnx2_init_nvram(struct bnx2 *bp)
+{
+ u32 val;
+ int j, entry_count, rc;
+ struct flash_spec *flash;
+
+ /* Determine the selected interface. */
+ val = REG_RD(bp, BNX2_NVM_CFG1);
+
+ entry_count = sizeof(flash_table) / sizeof(struct flash_spec);
+
+ rc = 0;
+ if (val & 0x40000000) {
+
+ /* Flash interface has been reconfigured */
+ for (j = 0, flash = &flash_table[0]; j < entry_count;
+ j++, flash++) {
+
+ if (val == flash->config1) {
+ bp->flash_info = flash;
+ break;
+ }
+ }
+ }
+ else {
+ /* Not yet been reconfigured */
+
+ for (j = 0, flash = &flash_table[0]; j < entry_count;
+ j++, flash++) {
+
+ if ((val & FLASH_STRAP_MASK) == flash->strapping) {
+ bp->flash_info = flash;
+
+ /* Request access to the flash interface. */
+ if ((rc = bnx2_acquire_nvram_lock(bp)) != 0)
+ return rc;
+
+ /* Enable access to flash interface */
+ bnx2_enable_nvram_access(bp);
+
+ /* Reconfigure the flash interface */
+ REG_WR(bp, BNX2_NVM_CFG1, flash->config1);
+ REG_WR(bp, BNX2_NVM_CFG2, flash->config2);
+ REG_WR(bp, BNX2_NVM_CFG3, flash->config3);
+ REG_WR(bp, BNX2_NVM_WRITE1, flash->write1);
+
+ /* Disable access to flash interface */
+ bnx2_disable_nvram_access(bp);
+ bnx2_release_nvram_lock(bp);
+
+ break;
+ }
+ }
+ } /* if (val & 0x40000000) */
+
+ if (j == entry_count) {
+ bp->flash_info = NULL;
+ printk(KERN_ALERT "Unknown flash/EEPROM type.\n");
+ rc = -ENODEV;
+ }
+
+ return rc;
+}
+
+static int
+bnx2_nvram_read(struct bnx2 *bp, u32 offset, u8 *ret_buf,
+ int buf_size)
+{
+ int rc = 0;
+ u32 cmd_flags, offset32, len32, extra;
+
+ if (buf_size == 0)
+ return 0;
+
+ /* Request access to the flash interface. */
+ if ((rc = bnx2_acquire_nvram_lock(bp)) != 0)
+ return rc;
+
+ /* Enable access to flash interface */
+ bnx2_enable_nvram_access(bp);
+
+ len32 = buf_size;
+ offset32 = offset;
+ extra = 0;
+
+ cmd_flags = 0;
+
+ if (offset32 & 3) {
+ u8 buf[4];
+ u32 pre_len;
+
+ offset32 &= ~3;
+ pre_len = 4 - (offset & 3);
+
+ if (pre_len >= len32) {
+ pre_len = len32;
+ cmd_flags = BNX2_NVM_COMMAND_FIRST |
+ BNX2_NVM_COMMAND_LAST;
+ }
+ else {
+ cmd_flags = BNX2_NVM_COMMAND_FIRST;
+ }
+
+ rc = bnx2_nvram_read_dword(bp, offset32, buf, cmd_flags);
+
+ if (rc)
+ return rc;
+
+ memcpy(ret_buf, buf + (offset & 3), pre_len);
+
+ offset32 += 4;
+ ret_buf += pre_len;
+ len32 -= pre_len;
+ }
+ if (len32 & 3) {
+ extra = 4 - (len32 & 3);
+ len32 = (len32 + 4) & ~3;
+ }
+
+ if (len32 == 4) {
+ u8 buf[4];
+
+ if (cmd_flags)
+ cmd_flags = BNX2_NVM_COMMAND_LAST;
+ else
+ cmd_flags = BNX2_NVM_COMMAND_FIRST |
+ BNX2_NVM_COMMAND_LAST;
+
+ rc = bnx2_nvram_read_dword(bp, offset32, buf, cmd_flags);
+
+ memcpy(ret_buf, buf, 4 - extra);
+ }
+ else if (len32 > 0) {
+ u8 buf[4];
+
+ /* Read the first word. */
+ if (cmd_flags)
+ cmd_flags = 0;
+ else
+ cmd_flags = BNX2_NVM_COMMAND_FIRST;
+
+ rc = bnx2_nvram_read_dword(bp, offset32, ret_buf, cmd_flags);
+
+ /* Advance to the next dword. */
+ offset32 += 4;
+ ret_buf += 4;
+ len32 -= 4;
+
+ while (len32 > 4 && rc == 0) {
+ rc = bnx2_nvram_read_dword(bp, offset32, ret_buf, 0);
+
+ /* Advance to the next dword. */
+ offset32 += 4;
+ ret_buf += 4;
+ len32 -= 4;
+ }
+
+ if (rc)
+ return rc;
+
+ cmd_flags = BNX2_NVM_COMMAND_LAST;
+ rc = bnx2_nvram_read_dword(bp, offset32, buf, cmd_flags);
+
+ memcpy(ret_buf, buf, 4 - extra);
+ }
+
+ /* Disable access to flash interface */
+ bnx2_disable_nvram_access(bp);
+
+ bnx2_release_nvram_lock(bp);
+
+ return rc;
+}
+
+static int
+bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
+ int buf_size)
+{
+ u32 written, offset32, len32;
+ u8 *buf, start[4], end[4];
+ int rc = 0;
+ int align_start, align_end;
+
+ buf = data_buf;
+ offset32 = offset;
+ len32 = buf_size;
+ align_start = align_end = 0;
+
+ if ((align_start = (offset32 & 3))) {
+ offset32 &= ~3;
+ len32 += align_start;
+ if ((rc = bnx2_nvram_read(bp, offset32, start, 4)))
+ return rc;
+ }
+
+ if (len32 & 3) {
+ if ((len32 > 4) || !align_start) {
+ align_end = 4 - (len32 & 3);
+ len32 += align_end;
+ if ((rc = bnx2_nvram_read(bp, offset32 + len32 - 4,
+ end, 4))) {
+ return rc;
+ }
+ }
+ }
+
+ if (align_start || align_end) {
+ buf = kmalloc(len32, GFP_KERNEL);
+ if (buf == 0)
+ return -ENOMEM;
+ if (align_start) {
+ memcpy(buf, start, 4);
+ }
+ if (align_end) {
+ memcpy(buf + len32 - 4, end, 4);
+ }
+ memcpy(buf + align_start, data_buf, buf_size);
+ }
+
+ written = 0;
+ while ((written < len32) && (rc == 0)) {
+ u32 page_start, page_end, data_start, data_end;
+ u32 addr, cmd_flags;
+ int i;
+ u8 flash_buffer[264];
+
+ /* Find the page_start addr */
+ page_start = offset32 + written;
+ page_start -= (page_start % bp->flash_info->page_size);
+ /* Find the page_end addr */
+ page_end = page_start + bp->flash_info->page_size;
+ /* Find the data_start addr */
+ data_start = (written == 0) ? offset32 : page_start;
+ /* Find the data_end addr */
+ data_end = (page_end > offset32 + len32) ?
+ (offset32 + len32) : page_end;
+
+ /* Request access to the flash interface. */
+ if ((rc = bnx2_acquire_nvram_lock(bp)) != 0)
+ goto nvram_write_end;
+
+ /* Enable access to flash interface */
+ bnx2_enable_nvram_access(bp);
+
+ cmd_flags = BNX2_NVM_COMMAND_FIRST;
+ if (bp->flash_info->buffered == 0) {
+ int j;
+
+ /* Read the whole page into the buffer
+ * (non-buffer flash only) */
+ for (j = 0; j < bp->flash_info->page_size; j += 4) {
+ if (j == (bp->flash_info->page_size - 4)) {
+ cmd_flags |= BNX2_NVM_COMMAND_LAST;
+ }
+ rc = bnx2_nvram_read_dword(bp,
+ page_start + j,
+ &flash_buffer[j],
+ cmd_flags);
+
+ if (rc)
+ goto nvram_write_end;
+
+ cmd_flags = 0;
+ }
+ }
+
+ /* Enable writes to flash interface (unlock write-protect) */
+ if ((rc = bnx2_enable_nvram_write(bp)) != 0)
+ goto nvram_write_end;
+
+ /* Erase the page */
+ if ((rc = bnx2_nvram_erase_page(bp, page_start)) != 0)
+ goto nvram_write_end;
+
+ /* Re-enable the write again for the actual write */
+ bnx2_enable_nvram_write(bp);
+
+ /* Loop to write back the buffer data from page_start to
+ * data_start */
+ i = 0;
+ if (bp->flash_info->buffered == 0) {
+ for (addr = page_start; addr < data_start;
+ addr += 4, i += 4) {
+
+ rc = bnx2_nvram_write_dword(bp, addr,
+ &flash_buffer[i], cmd_flags);
+
+ if (rc != 0)
+ goto nvram_write_end;
+
+ cmd_flags = 0;
+ }
+ }
+
+ /* Loop to write the new data from data_start to data_end */
+ for (addr = data_start; addr < data_end; addr += 4, i++) {
+ if ((addr == page_end - 4) ||
+ ((bp->flash_info->buffered) &&
+ (addr == data_end - 4))) {
+
+ cmd_flags |= BNX2_NVM_COMMAND_LAST;
+ }
+ rc = bnx2_nvram_write_dword(bp, addr, buf,
+ cmd_flags);
+
+ if (rc != 0)
+ goto nvram_write_end;
+
+ cmd_flags = 0;
+ buf += 4;
+ }
+
+ /* Loop to write back the buffer data from data_end
+ * to page_end */
+ if (bp->flash_info->buffered == 0) {
+ for (addr = data_end; addr < page_end;
+ addr += 4, i += 4) {
+
+ if (addr == page_end-4) {
+ cmd_flags = BNX2_NVM_COMMAND_LAST;
+ }
+ rc = bnx2_nvram_write_dword(bp, addr,
+ &flash_buffer[i], cmd_flags);
+
+ if (rc != 0)
+ goto nvram_write_end;
+
+ cmd_flags = 0;
+ }
+ }
+
+ /* Disable writes to flash interface (lock write-protect) */
+ bnx2_disable_nvram_write(bp);
+
+ /* Disable access to flash interface */
+ bnx2_disable_nvram_access(bp);
+ bnx2_release_nvram_lock(bp);
+
+ /* Increment written */
+ written += data_end - data_start;
+ }
+
+nvram_write_end:
+ if (align_start || align_end)
+ kfree(buf);
+ return rc;
+}
+
+static int
+bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
+{
+ u32 val;
+ int i, rc = 0;
+
+ /* Wait for the current PCI transaction to complete before
+ * issuing a reset. */
+ REG_WR(bp, BNX2_MISC_ENABLE_CLR_BITS,
+ BNX2_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE |
+ BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE |
+ BNX2_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE |
+ BNX2_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE);
+ val = REG_RD(bp, BNX2_MISC_ENABLE_CLR_BITS);
+ udelay(5);
+
+ /* Deposit a driver reset signature so the firmware knows that
+ * this is a soft reset. */
+ REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_RESET_SIGNATURE,
+ BNX2_DRV_RESET_SIGNATURE_MAGIC);
+
+ bp->fw_timed_out = 0;
+
+ /* Wait for the firmware to tell us it is ok to issue a reset. */
+ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code);
+
+ /* Do a dummy read to force the chip to complete all current transaction
+ * before we issue a reset. */
+ val = REG_RD(bp, BNX2_MISC_ID);
+
+ val = BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ |
+ BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
+ BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP;
+
+ /* Chip reset. */
+ REG_WR(bp, BNX2_PCICFG_MISC_CONFIG, val);
+
+ if ((CHIP_ID(bp) == CHIP_ID_5706_A0) ||
+ (CHIP_ID(bp) == CHIP_ID_5706_A1))
+ msleep(15);
+
+ /* Reset takes approximate 30 usec */
+ for (i = 0; i < 10; i++) {
+ val = REG_RD(bp, BNX2_PCICFG_MISC_CONFIG);
+ if ((val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ |
+ BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) == 0) {
+ break;
+ }
+ udelay(10);
+ }
+
+ if (val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ |
+ BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) {
+ printk(KERN_ERR PFX "Chip reset did not complete\n");
+ return -EBUSY;
+ }
+
+ /* Make sure byte swapping is properly configured. */
+ val = REG_RD(bp, BNX2_PCI_SWAP_DIAG0);
+ if (val != 0x01020304) {
+ printk(KERN_ERR PFX "Chip not in correct endian mode\n");
+ return -ENODEV;
+ }
+
+ bp->fw_timed_out = 0;
+
+ /* Wait for the firmware to finish its initialization. */
+ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT1 | reset_code);
+
+ if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
+ /* Adjust the voltage regular to two steps lower. The default
+ * of this register is 0x0000000e. */
+ REG_WR(bp, BNX2_MISC_VREG_CONTROL, 0x000000fa);
+
+ /* Remove bad rbuf memory from the free pool. */
+ rc = bnx2_alloc_bad_rbuf(bp);
+ }
+
+ return rc;
+}
+
+static int
+bnx2_init_chip(struct bnx2 *bp)
+{
+ u32 val;
+
+ /* Make sure the interrupt is not active. */
+ REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
+
+ val = BNX2_DMA_CONFIG_DATA_BYTE_SWAP |
+ BNX2_DMA_CONFIG_DATA_WORD_SWAP |
+#ifdef __BIG_ENDIAN
+ BNX2_DMA_CONFIG_CNTL_BYTE_SWAP |
+#endif
+ BNX2_DMA_CONFIG_CNTL_WORD_SWAP |
+ DMA_READ_CHANS << 12 |
+ DMA_WRITE_CHANS << 16;
+
+ val |= (0x2 << 20) | (1 << 11);
+
+ if ((bp->flags & PCIX_FLAG) && (bp->bus_speed_mhz = 133))
+ val |= (1 << 23);
+
+ if ((CHIP_NUM(bp) == CHIP_NUM_5706) &&
+ (CHIP_ID(bp) != CHIP_ID_5706_A0) && !(bp->flags & PCIX_FLAG))
+ val |= BNX2_DMA_CONFIG_CNTL_PING_PONG_DMA;
+
+ REG_WR(bp, BNX2_DMA_CONFIG, val);
+
+ if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
+ val = REG_RD(bp, BNX2_TDMA_CONFIG);
+ val |= BNX2_TDMA_CONFIG_ONE_DMA;
+ REG_WR(bp, BNX2_TDMA_CONFIG, val);
+ }
+
+ if (bp->flags & PCIX_FLAG) {
+ u16 val16;
+
+ pci_read_config_word(bp->pdev, bp->pcix_cap + PCI_X_CMD,
+ &val16);
+ pci_write_config_word(bp->pdev, bp->pcix_cap + PCI_X_CMD,
+ val16 & ~PCI_X_CMD_ERO);
+ }
+
+ REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS,
+ BNX2_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE |
+ BNX2_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE |
+ BNX2_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE);
+
+ /* Initialize context mapping and zero out the quick contexts. The
+ * context block must have already been enabled. */
+ bnx2_init_context(bp);
+
+ bnx2_init_cpus(bp);
+ bnx2_init_nvram(bp);
+
+ bnx2_set_mac_addr(bp);
+
+ val = REG_RD(bp, BNX2_MQ_CONFIG);
+ val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE;
+ val |= BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256;
+ REG_WR(bp, BNX2_MQ_CONFIG, val);
+
+ val = 0x10000 + (MAX_CID_CNT * MB_KERNEL_CTX_SIZE);
+ REG_WR(bp, BNX2_MQ_KNL_BYP_WIND_START, val);
+ REG_WR(bp, BNX2_MQ_KNL_WIND_END, val);
+
+ val = (BCM_PAGE_BITS - 8) << 24;
+ REG_WR(bp, BNX2_RV2P_CONFIG, val);
+
+ /* Configure page size. */
+ val = REG_RD(bp, BNX2_TBDR_CONFIG);
+ val &= ~BNX2_TBDR_CONFIG_PAGE_SIZE;
+ val |= (BCM_PAGE_BITS - 8) << 24 | 0x40;
+ REG_WR(bp, BNX2_TBDR_CONFIG, val);
+
+ val = bp->mac_addr[0] +
+ (bp->mac_addr[1] << 8) +
+ (bp->mac_addr[2] << 16) +
+ bp->mac_addr[3] +
+ (bp->mac_addr[4] << 8) +
+ (bp->mac_addr[5] << 16);
+ REG_WR(bp, BNX2_EMAC_BACKOFF_SEED, val);
+
+ /* Program the MTU. Also include 4 bytes for CRC32. */
+ val = bp->dev->mtu + ETH_HLEN + 4;
+ if (val > (MAX_ETHERNET_PACKET_SIZE + 4))
+ val |= BNX2_EMAC_RX_MTU_SIZE_JUMBO_ENA;
+ REG_WR(bp, BNX2_EMAC_RX_MTU_SIZE, val);
+
+ bp->last_status_idx = 0;
+ bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE;
+
+ /* Set up how to generate a link change interrupt. */
+ REG_WR(bp, BNX2_EMAC_ATTENTION_ENA, BNX2_EMAC_ATTENTION_ENA_LINK);
+
+ REG_WR(bp, BNX2_HC_STATUS_ADDR_L,
+ (u64) bp->status_blk_mapping & 0xffffffff);
+ REG_WR(bp, BNX2_HC_STATUS_ADDR_H, (u64) bp->status_blk_mapping >> 32);
+
+ REG_WR(bp, BNX2_HC_STATISTICS_ADDR_L,
+ (u64) bp->stats_blk_mapping & 0xffffffff);
+ REG_WR(bp, BNX2_HC_STATISTICS_ADDR_H,
+ (u64) bp->stats_blk_mapping >> 32);
+
+ REG_WR(bp, BNX2_HC_TX_QUICK_CONS_TRIP,
+ (bp->tx_quick_cons_trip_int << 16) | bp->tx_quick_cons_trip);
+
+ REG_WR(bp, BNX2_HC_RX_QUICK_CONS_TRIP,
+ (bp->rx_quick_cons_trip_int << 16) | bp->rx_quick_cons_trip);
+
+ REG_WR(bp, BNX2_HC_COMP_PROD_TRIP,
+ (bp->comp_prod_trip_int << 16) | bp->comp_prod_trip);
+
+ REG_WR(bp, BNX2_HC_TX_TICKS, (bp->tx_ticks_int << 16) | bp->tx_ticks);
+
+ REG_WR(bp, BNX2_HC_RX_TICKS, (bp->rx_ticks_int << 16) | bp->rx_ticks);
+
+ REG_WR(bp, BNX2_HC_COM_TICKS,
+ (bp->com_ticks_int << 16) | bp->com_ticks);
+
+ REG_WR(bp, BNX2_HC_CMD_TICKS,
+ (bp->cmd_ticks_int << 16) | bp->cmd_ticks);
+
+ REG_WR(bp, BNX2_HC_STATS_TICKS, bp->stats_ticks & 0xffff00);
+ REG_WR(bp, BNX2_HC_STAT_COLLECT_TICKS, 0xbb8); /* 3ms */
+
+ if (CHIP_ID(bp) == CHIP_ID_5706_A1)
+ REG_WR(bp, BNX2_HC_CONFIG, BNX2_HC_CONFIG_COLLECT_STATS);
+ else {
+ REG_WR(bp, BNX2_HC_CONFIG, BNX2_HC_CONFIG_RX_TMR_MODE |
+ BNX2_HC_CONFIG_TX_TMR_MODE |
+ BNX2_HC_CONFIG_COLLECT_STATS);
+ }
+
+ /* Clear internal stats counters. */
+ REG_WR(bp, BNX2_HC_COMMAND, BNX2_HC_COMMAND_CLR_STAT_NOW);
+
+ REG_WR(bp, BNX2_HC_ATTN_BITS_ENABLE, STATUS_ATTN_BITS_LINK_STATE);
+
+ /* Initialize the receive filter. */
+ bnx2_set_rx_mode(bp->dev);
+
+ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET);
+
+ REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, 0x5ffffff);
+ REG_RD(bp, BNX2_MISC_ENABLE_SET_BITS);
+
+ udelay(20);
+
+ return 0;
+}
+
+
+static void
+bnx2_init_tx_ring(struct bnx2 *bp)
+{
+ struct tx_bd *txbd;
+ u32 val;
+
+ txbd = &bp->tx_desc_ring[MAX_TX_DESC_CNT];
+
+ txbd->tx_bd_haddr_hi = (u64) bp->tx_desc_mapping >> 32;
+ txbd->tx_bd_haddr_lo = (u64) bp->tx_desc_mapping & 0xffffffff;
+
+ bp->tx_prod = 0;
+ bp->tx_cons = 0;
+ bp->tx_prod_bseq = 0;
+ atomic_set(&bp->tx_avail_bd, bp->tx_ring_size);
+
+ val = BNX2_L2CTX_TYPE_TYPE_L2;
+ val |= BNX2_L2CTX_TYPE_SIZE_L2;
+ CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TYPE, val);
+
+ val = BNX2_L2CTX_CMD_TYPE_TYPE_L2;
+ val |= 8 << 16;
+ CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_CMD_TYPE, val);
+
+ val = (u64) bp->tx_desc_mapping >> 32;
+ CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TBDR_BHADDR_HI, val);
+
+ val = (u64) bp->tx_desc_mapping & 0xffffffff;
+ CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TBDR_BHADDR_LO, val);
+}
+
+static void
+bnx2_init_rx_ring(struct bnx2 *bp)
+{
+ struct rx_bd *rxbd;
+ int i;
+ u16 prod, ring_prod;
+ u32 val;
+
+ /* 8 for CRC and VLAN */
+ bp->rx_buf_use_size = bp->dev->mtu + ETH_HLEN + bp->rx_offset + 8;
+ /* 8 for alignment */
+ bp->rx_buf_size = bp->rx_buf_use_size + 8;
+
+ ring_prod = prod = bp->rx_prod = 0;
+ bp->rx_cons = 0;
+ bp->rx_prod_bseq = 0;
+
+ rxbd = &bp->rx_desc_ring[0];
+ for (i = 0; i < MAX_RX_DESC_CNT; i++, rxbd++) {
+ rxbd->rx_bd_len = bp->rx_buf_use_size;
+ rxbd->rx_bd_flags = RX_BD_FLAGS_START | RX_BD_FLAGS_END;
+ }
+
+ rxbd->rx_bd_haddr_hi = (u64) bp->rx_desc_mapping >> 32;
+ rxbd->rx_bd_haddr_lo = (u64) bp->rx_desc_mapping & 0xffffffff;
+
+ val = BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE;
+ val |= BNX2_L2CTX_CTX_TYPE_SIZE_L2;
+ val |= 0x02 << 8;
+ CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_CTX_TYPE, val);
+
+ val = (u64) bp->rx_desc_mapping >> 32;
+ CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_NX_BDHADDR_HI, val);
+
+ val = (u64) bp->rx_desc_mapping & 0xffffffff;
+ CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_NX_BDHADDR_LO, val);
+
+ for ( ;ring_prod < bp->rx_ring_size; ) {
+ if (bnx2_alloc_rx_skb(bp, ring_prod) < 0) {
+ break;
+ }
+ prod = NEXT_RX_BD(prod);
+ ring_prod = RX_RING_IDX(prod);
+ }
+ bp->rx_prod = prod;
+
+ REG_WR16(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BDIDX, prod);
+
+ REG_WR(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BSEQ, bp->rx_prod_bseq);
+}
+
+static void
+bnx2_free_tx_skbs(struct bnx2 *bp)
+{
+ int i;
+
+ if (bp->tx_buf_ring == NULL)
+ return;
+
+ for (i = 0; i < TX_DESC_CNT; ) {
+ struct sw_bd *tx_buf = &bp->tx_buf_ring[i];
+ struct sk_buff *skb = tx_buf->skb;
+ int j, last;
+
+ if (skb == NULL) {
+ i++;
+ continue;
+ }
+
+ pci_unmap_single(bp->pdev, pci_unmap_addr(tx_buf, mapping),
+ skb_headlen(skb), PCI_DMA_TODEVICE);
+
+ tx_buf->skb = NULL;
+
+ last = skb_shinfo(skb)->nr_frags;
+ for (j = 0; j < last; j++) {
+ tx_buf = &bp->tx_buf_ring[i + j + 1];
+ pci_unmap_page(bp->pdev,
+ pci_unmap_addr(tx_buf, mapping),
+ skb_shinfo(skb)->frags[j].size,
+ PCI_DMA_TODEVICE);
+ }
+ dev_kfree_skb_any(skb);
+ i += j + 1;
+ }
+
+}
+
+static void
+bnx2_free_rx_skbs(struct bnx2 *bp)
+{
+ int i;
+
+ if (bp->rx_buf_ring == NULL)
+ return;
+
+ for (i = 0; i < RX_DESC_CNT; i++) {
+ struct sw_bd *rx_buf = &bp->rx_buf_ring[i];
+ struct sk_buff *skb = rx_buf->skb;
+
+ if (skb == 0)
+ continue;
+
+ pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping),
+ bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
+
+ rx_buf->skb = NULL;
+
+ dev_kfree_skb_any(skb);
+ }
+}
+
+static void
+bnx2_free_skbs(struct bnx2 *bp)
+{
+ bnx2_free_tx_skbs(bp);
+ bnx2_free_rx_skbs(bp);
+}
+
+static int
+bnx2_reset_nic(struct bnx2 *bp, u32 reset_code)
+{
+ int rc;
+
+ rc = bnx2_reset_chip(bp, reset_code);
+ bnx2_free_skbs(bp);
+ if (rc)
+ return rc;
+
+ bnx2_init_chip(bp);
+ bnx2_init_tx_ring(bp);
+ bnx2_init_rx_ring(bp);
+ return 0;
+}
+
+static int
+bnx2_init_nic(struct bnx2 *bp)
+{
+ int rc;
+
+ if ((rc = bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET)) != 0)
+ return rc;
+
+ bnx2_init_phy(bp);
+ bnx2_set_link(bp);
+ return 0;
+}
+
+static int
+bnx2_test_registers(struct bnx2 *bp)
+{
+ int ret;
+ int i;
+ static struct {
+ u16 offset;
+ u16 flags;
+ u32 rw_mask;
+ u32 ro_mask;
+ } reg_tbl[] = {
+ { 0x006c, 0, 0x00000000, 0x0000003f },
+ { 0x0090, 0, 0xffffffff, 0x00000000 },
+ { 0x0094, 0, 0x00000000, 0x00000000 },
+
+ { 0x0404, 0, 0x00003f00, 0x00000000 },
+ { 0x0418, 0, 0x00000000, 0xffffffff },
+ { 0x041c, 0, 0x00000000, 0xffffffff },
+ { 0x0420, 0, 0x00000000, 0x80ffffff },
+ { 0x0424, 0, 0x00000000, 0x00000000 },
+ { 0x0428, 0, 0x00000000, 0x00000001 },
+ { 0x0450, 0, 0x00000000, 0x0000ffff },
+ { 0x0454, 0, 0x00000000, 0xffffffff },
+ { 0x0458, 0, 0x00000000, 0xffffffff },
+
+ { 0x0808, 0, 0x00000000, 0xffffffff },
+ { 0x0854, 0, 0x00000000, 0xffffffff },
+ { 0x0868, 0, 0x00000000, 0x77777777 },
+ { 0x086c, 0, 0x00000000, 0x77777777 },
+ { 0x0870, 0, 0x00000000, 0x77777777 },
+ { 0x0874, 0, 0x00000000, 0x77777777 },
+
+ { 0x0c00, 0, 0x00000000, 0x00000001 },
+ { 0x0c04, 0, 0x00000000, 0x03ff0001 },
+ { 0x0c08, 0, 0x0f0ff073, 0x00000000 },
+ { 0x0c0c, 0, 0x00ffffff, 0x00000000 },
+ { 0x0c30, 0, 0x00000000, 0xffffffff },
+ { 0x0c34, 0, 0x00000000, 0xffffffff },
+ { 0x0c38, 0, 0x00000000, 0xffffffff },
+ { 0x0c3c, 0, 0x00000000, 0xffffffff },
+ { 0x0c40, 0, 0x00000000, 0xffffffff },
+ { 0x0c44, 0, 0x00000000, 0xffffffff },
+ { 0x0c48, 0, 0x00000000, 0x0007ffff },
+ { 0x0c4c, 0, 0x00000000, 0xffffffff },
+ { 0x0c50, 0, 0x00000000, 0xffffffff },
+ { 0x0c54, 0, 0x00000000, 0xffffffff },
+ { 0x0c58, 0, 0x00000000, 0xffffffff },
+ { 0x0c5c, 0, 0x00000000, 0xffffffff },
+ { 0x0c60, 0, 0x00000000, 0xffffffff },
+ { 0x0c64, 0, 0x00000000, 0xffffffff },
+ { 0x0c68, 0, 0x00000000, 0xffffffff },
+ { 0x0c6c, 0, 0x00000000, 0xffffffff },
+ { 0x0c70, 0, 0x00000000, 0xffffffff },
+ { 0x0c74, 0, 0x00000000, 0xffffffff },
+ { 0x0c78, 0, 0x00000000, 0xffffffff },
+ { 0x0c7c, 0, 0x00000000, 0xffffffff },
+ { 0x0c80, 0, 0x00000000, 0xffffffff },
+ { 0x0c84, 0, 0x00000000, 0xffffffff },
+ { 0x0c88, 0, 0x00000000, 0xffffffff },
+ { 0x0c8c, 0, 0x00000000, 0xffffffff },
+ { 0x0c90, 0, 0x00000000, 0xffffffff },
+ { 0x0c94, 0, 0x00000000, 0xffffffff },
+ { 0x0c98, 0, 0x00000000, 0xffffffff },
+ { 0x0c9c, 0, 0x00000000, 0xffffffff },
+ { 0x0ca0, 0, 0x00000000, 0xffffffff },
+ { 0x0ca4, 0, 0x00000000, 0xffffffff },
+ { 0x0ca8, 0, 0x00000000, 0x0007ffff },
+ { 0x0cac, 0, 0x00000000, 0xffffffff },
+ { 0x0cb0, 0, 0x00000000, 0xffffffff },
+ { 0x0cb4, 0, 0x00000000, 0xffffffff },
+ { 0x0cb8, 0, 0x00000000, 0xffffffff },
+ { 0x0cbc, 0, 0x00000000, 0xffffffff },
+ { 0x0cc0, 0, 0x00000000, 0xffffffff },
+ { 0x0cc4, 0, 0x00000000, 0xffffffff },
+ { 0x0cc8, 0, 0x00000000, 0xffffffff },
+ { 0x0ccc, 0, 0x00000000, 0xffffffff },
+ { 0x0cd0, 0, 0x00000000, 0xffffffff },
+ { 0x0cd4, 0, 0x00000000, 0xffffffff },
+ { 0x0cd8, 0, 0x00000000, 0xffffffff },
+ { 0x0cdc, 0, 0x00000000, 0xffffffff },
+ { 0x0ce0, 0, 0x00000000, 0xffffffff },
+ { 0x0ce4, 0, 0x00000000, 0xffffffff },
+ { 0x0ce8, 0, 0x00000000, 0xffffffff },
+ { 0x0cec, 0, 0x00000000, 0xffffffff },
+ { 0x0cf0, 0, 0x00000000, 0xffffffff },
+ { 0x0cf4, 0, 0x00000000, 0xffffffff },
+ { 0x0cf8, 0, 0x00000000, 0xffffffff },
+ { 0x0cfc, 0, 0x00000000, 0xffffffff },
+ { 0x0d00, 0, 0x00000000, 0xffffffff },
+ { 0x0d04, 0, 0x00000000, 0xffffffff },
+
+ { 0x1000, 0, 0x00000000, 0x00000001 },
+ { 0x1004, 0, 0x00000000, 0x000f0001 },
+ { 0x1044, 0, 0x00000000, 0xffc003ff },
+ { 0x1080, 0, 0x00000000, 0x0001ffff },
+ { 0x1084, 0, 0x00000000, 0xffffffff },
+ { 0x1088, 0, 0x00000000, 0xffffffff },
+ { 0x108c, 0, 0x00000000, 0xffffffff },
+ { 0x1090, 0, 0x00000000, 0xffffffff },
+ { 0x1094, 0, 0x00000000, 0xffffffff },
+ { 0x1098, 0, 0x00000000, 0xffffffff },
+ { 0x109c, 0, 0x00000000, 0xffffffff },
+ { 0x10a0, 0, 0x00000000, 0xffffffff },
+
+ { 0x1408, 0, 0x01c00800, 0x00000000 },
+ { 0x149c, 0, 0x8000ffff, 0x00000000 },
+ { 0x14a8, 0, 0x00000000, 0x000001ff },
+ { 0x14ac, 0, 0x4fffffff, 0x10000000 },
+ { 0x14b0, 0, 0x00000002, 0x00000001 },
+ { 0x14b8, 0, 0x00000000, 0x00000000 },
+ { 0x14c0, 0, 0x00000000, 0x00000009 },
+ { 0x14c4, 0, 0x00003fff, 0x00000000 },
+ { 0x14cc, 0, 0x00000000, 0x00000001 },
+ { 0x14d0, 0, 0xffffffff, 0x00000000 },
+ { 0x1500, 0, 0x00000000, 0xffffffff },
+ { 0x1504, 0, 0x00000000, 0xffffffff },
+ { 0x1508, 0, 0x00000000, 0xffffffff },
+ { 0x150c, 0, 0x00000000, 0xffffffff },
+ { 0x1510, 0, 0x00000000, 0xffffffff },
+ { 0x1514, 0, 0x00000000, 0xffffffff },
+ { 0x1518, 0, 0x00000000, 0xffffffff },
+ { 0x151c, 0, 0x00000000, 0xffffffff },
+ { 0x1520, 0, 0x00000000, 0xffffffff },
+ { 0x1524, 0, 0x00000000, 0xffffffff },
+ { 0x1528, 0, 0x00000000, 0xffffffff },
+ { 0x152c, 0, 0x00000000, 0xffffffff },
+ { 0x1530, 0, 0x00000000, 0xffffffff },
+ { 0x1534, 0, 0x00000000, 0xffffffff },
+ { 0x1538, 0, 0x00000000, 0xffffffff },
+ { 0x153c, 0, 0x00000000, 0xffffffff },
+ { 0x1540, 0, 0x00000000, 0xffffffff },
+ { 0x1544, 0, 0x00000000, 0xffffffff },
+ { 0x1548, 0, 0x00000000, 0xffffffff },
+ { 0x154c, 0, 0x00000000, 0xffffffff },
+ { 0x1550, 0, 0x00000000, 0xffffffff },
+ { 0x1554, 0, 0x00000000, 0xffffffff },
+ { 0x1558, 0, 0x00000000, 0xffffffff },
+ { 0x1600, 0, 0x00000000, 0xffffffff },
+ { 0x1604, 0, 0x00000000, 0xffffffff },
+ { 0x1608, 0, 0x00000000, 0xffffffff },
+ { 0x160c, 0, 0x00000000, 0xffffffff },
+ { 0x1610, 0, 0x00000000, 0xffffffff },
+ { 0x1614, 0, 0x00000000, 0xffffffff },
+ { 0x1618, 0, 0x00000000, 0xffffffff },
+ { 0x161c, 0, 0x00000000, 0xffffffff },
+ { 0x1620, 0, 0x00000000, 0xffffffff },
+ { 0x1624, 0, 0x00000000, 0xffffffff },
+ { 0x1628, 0, 0x00000000, 0xffffffff },
+ { 0x162c, 0, 0x00000000, 0xffffffff },
+ { 0x1630, 0, 0x00000000, 0xffffffff },
+ { 0x1634, 0, 0x00000000, 0xffffffff },
+ { 0x1638, 0, 0x00000000, 0xffffffff },
+ { 0x163c, 0, 0x00000000, 0xffffffff },
+ { 0x1640, 0, 0x00000000, 0xffffffff },
+ { 0x1644, 0, 0x00000000, 0xffffffff },
+ { 0x1648, 0, 0x00000000, 0xffffffff },
+ { 0x164c, 0, 0x00000000, 0xffffffff },
+ { 0x1650, 0, 0x00000000, 0xffffffff },
+ { 0x1654, 0, 0x00000000, 0xffffffff },
+
+ { 0x1800, 0, 0x00000000, 0x00000001 },
+ { 0x1804, 0, 0x00000000, 0x00000003 },
+ { 0x1840, 0, 0x00000000, 0xffffffff },
+ { 0x1844, 0, 0x00000000, 0xffffffff },
+ { 0x1848, 0, 0x00000000, 0xffffffff },
+ { 0x184c, 0, 0x00000000, 0xffffffff },
+ { 0x1850, 0, 0x00000000, 0xffffffff },
+ { 0x1900, 0, 0x7ffbffff, 0x00000000 },
+ { 0x1904, 0, 0xffffffff, 0x00000000 },
+ { 0x190c, 0, 0xffffffff, 0x00000000 },
+ { 0x1914, 0, 0xffffffff, 0x00000000 },
+ { 0x191c, 0, 0xffffffff, 0x00000000 },
+ { 0x1924, 0, 0xffffffff, 0x00000000 },
+ { 0x192c, 0, 0xffffffff, 0x00000000 },
+ { 0x1934, 0, 0xffffffff, 0x00000000 },
+ { 0x193c, 0, 0xffffffff, 0x00000000 },
+ { 0x1944, 0, 0xffffffff, 0x00000000 },
+ { 0x194c, 0, 0xffffffff, 0x00000000 },
+ { 0x1954, 0, 0xffffffff, 0x00000000 },
+ { 0x195c, 0, 0xffffffff, 0x00000000 },
+ { 0x1964, 0, 0xffffffff, 0x00000000 },
+ { 0x196c, 0, 0xffffffff, 0x00000000 },
+ { 0x1974, 0, 0xffffffff, 0x00000000 },
+ { 0x197c, 0, 0xffffffff, 0x00000000 },
+ { 0x1980, 0, 0x0700ffff, 0x00000000 },
+
+ { 0x1c00, 0, 0x00000000, 0x00000001 },
+ { 0x1c04, 0, 0x00000000, 0x00000003 },
+ { 0x1c08, 0, 0x0000000f, 0x00000000 },
+ { 0x1c40, 0, 0x00000000, 0xffffffff },
+ { 0x1c44, 0, 0x00000000, 0xffffffff },
+ { 0x1c48, 0, 0x00000000, 0xffffffff },
+ { 0x1c4c, 0, 0x00000000, 0xffffffff },
+ { 0x1c50, 0, 0x00000000, 0xffffffff },
+ { 0x1d00, 0, 0x7ffbffff, 0x00000000 },
+ { 0x1d04, 0, 0xffffffff, 0x00000000 },
+ { 0x1d0c, 0, 0xffffffff, 0x00000000 },
+ { 0x1d14, 0, 0xffffffff, 0x00000000 },
+ { 0x1d1c, 0, 0xffffffff, 0x00000000 },
+ { 0x1d24, 0, 0xffffffff, 0x00000000 },
+ { 0x1d2c, 0, 0xffffffff, 0x00000000 },
+ { 0x1d34, 0, 0xffffffff, 0x00000000 },
+ { 0x1d3c, 0, 0xffffffff, 0x00000000 },
+ { 0x1d44, 0, 0xffffffff, 0x00000000 },
+ { 0x1d4c, 0, 0xffffffff, 0x00000000 },
+ { 0x1d54, 0, 0xffffffff, 0x00000000 },
+ { 0x1d5c, 0, 0xffffffff, 0x00000000 },
+ { 0x1d64, 0, 0xffffffff, 0x00000000 },
+ { 0x1d6c, 0, 0xffffffff, 0x00000000 },
+ { 0x1d74, 0, 0xffffffff, 0x00000000 },
+ { 0x1d7c, 0, 0xffffffff, 0x00000000 },
+ { 0x1d80, 0, 0x0700ffff, 0x00000000 },
+
+ { 0x2004, 0, 0x00000000, 0x0337000f },
+ { 0x2008, 0, 0xffffffff, 0x00000000 },
+ { 0x200c, 0, 0xffffffff, 0x00000000 },
+ { 0x2010, 0, 0xffffffff, 0x00000000 },
+ { 0x2014, 0, 0x801fff80, 0x00000000 },
+ { 0x2018, 0, 0x000003ff, 0x00000000 },
+
+ { 0x2800, 0, 0x00000000, 0x00000001 },
+ { 0x2804, 0, 0x00000000, 0x00003f01 },
+ { 0x2808, 0, 0x0f3f3f03, 0x00000000 },
+ { 0x2810, 0, 0xffff0000, 0x00000000 },
+ { 0x2814, 0, 0xffff0000, 0x00000000 },
+ { 0x2818, 0, 0xffff0000, 0x00000000 },
+ { 0x281c, 0, 0xffff0000, 0x00000000 },
+ { 0x2834, 0, 0xffffffff, 0x00000000 },
+ { 0x2840, 0, 0x00000000, 0xffffffff },
+ { 0x2844, 0, 0x00000000, 0xffffffff },
+ { 0x2848, 0, 0xffffffff, 0x00000000 },
+ { 0x284c, 0, 0xf800f800, 0x07ff07ff },
+
+ { 0x2c00, 0, 0x00000000, 0x00000011 },
+ { 0x2c04, 0, 0x00000000, 0x00030007 },
+
+ { 0x3000, 0, 0x00000000, 0x00000001 },
+ { 0x3004, 0, 0x00000000, 0x007007ff },
+ { 0x3008, 0, 0x00000003, 0x00000000 },
+ { 0x300c, 0, 0xffffffff, 0x00000000 },
+ { 0x3010, 0, 0xffffffff, 0x00000000 },
+ { 0x3014, 0, 0xffffffff, 0x00000000 },
+ { 0x3034, 0, 0xffffffff, 0x00000000 },
+ { 0x3038, 0, 0xffffffff, 0x00000000 },
+ { 0x3050, 0, 0x00000001, 0x00000000 },
+
+ { 0x3c00, 0, 0x00000000, 0x00000001 },
+ { 0x3c04, 0, 0x00000000, 0x00070000 },
+ { 0x3c08, 0, 0x00007f71, 0x07f00000 },
+ { 0x3c0c, 0, 0x1f3ffffc, 0x00000000 },
+ { 0x3c10, 0, 0xffffffff, 0x00000000 },
+ { 0x3c14, 0, 0x00000000, 0xffffffff },
+ { 0x3c18, 0, 0x00000000, 0xffffffff },
+ { 0x3c1c, 0, 0xfffff000, 0x00000000 },
+ { 0x3c20, 0, 0xffffff00, 0x00000000 },
+ { 0x3c24, 0, 0xffffffff, 0x00000000 },
+ { 0x3c28, 0, 0xffffffff, 0x00000000 },
+ { 0x3c2c, 0, 0xffffffff, 0x00000000 },
+ { 0x3c30, 0, 0xffffffff, 0x00000000 },
+ { 0x3c34, 0, 0xffffffff, 0x00000000 },
+ { 0x3c38, 0, 0xffffffff, 0x00000000 },
+ { 0x3c3c, 0, 0xffffffff, 0x00000000 },
+ { 0x3c40, 0, 0xffffffff, 0x00000000 },
+ { 0x3c44, 0, 0xffffffff, 0x00000000 },
+ { 0x3c48, 0, 0xffffffff, 0x00000000 },
+ { 0x3c4c, 0, 0xffffffff, 0x00000000 },
+ { 0x3c50, 0, 0xffffffff, 0x00000000 },
+ { 0x3c54, 0, 0xffffffff, 0x00000000 },
+ { 0x3c58, 0, 0xffffffff, 0x00000000 },
+ { 0x3c5c, 0, 0xffffffff, 0x00000000 },
+ { 0x3c60, 0, 0xffffffff, 0x00000000 },
+ { 0x3c64, 0, 0xffffffff, 0x00000000 },
+ { 0x3c68, 0, 0xffffffff, 0x00000000 },
+ { 0x3c6c, 0, 0xffffffff, 0x00000000 },
+ { 0x3c70, 0, 0xffffffff, 0x00000000 },
+ { 0x3c74, 0, 0x0000003f, 0x00000000 },
+ { 0x3c78, 0, 0x00000000, 0x00000000 },
+ { 0x3c7c, 0, 0x00000000, 0x00000000 },
+ { 0x3c80, 0, 0x3fffffff, 0x00000000 },
+ { 0x3c84, 0, 0x0000003f, 0x00000000 },
+ { 0x3c88, 0, 0x00000000, 0xffffffff },
+ { 0x3c8c, 0, 0x00000000, 0xffffffff },
+
+ { 0x4000, 0, 0x00000000, 0x00000001 },
+ { 0x4004, 0, 0x00000000, 0x00030000 },
+ { 0x4008, 0, 0x00000ff0, 0x00000000 },
+ { 0x400c, 0, 0xffffffff, 0x00000000 },
+ { 0x4088, 0, 0x00000000, 0x00070303 },
+
+ { 0x4400, 0, 0x00000000, 0x00000001 },
+ { 0x4404, 0, 0x00000000, 0x00003f01 },
+ { 0x4408, 0, 0x7fff00ff, 0x00000000 },
+ { 0x440c, 0, 0xffffffff, 0x00000000 },
+ { 0x4410, 0, 0xffff, 0x0000 },
+ { 0x4414, 0, 0xffff, 0x0000 },
+ { 0x4418, 0, 0xffff, 0x0000 },
+ { 0x441c, 0, 0xffff, 0x0000 },
+ { 0x4428, 0, 0xffffffff, 0x00000000 },
+ { 0x442c, 0, 0xffffffff, 0x00000000 },
+ { 0x4430, 0, 0xffffffff, 0x00000000 },
+ { 0x4434, 0, 0xffffffff, 0x00000000 },
+ { 0x4438, 0, 0xffffffff, 0x00000000 },
+ { 0x443c, 0, 0xffffffff, 0x00000000 },
+ { 0x4440, 0, 0xffffffff, 0x00000000 },
+ { 0x4444, 0, 0xffffffff, 0x00000000 },
+
+ { 0x4c00, 0, 0x00000000, 0x00000001 },
+ { 0x4c04, 0, 0x00000000, 0x0000003f },
+ { 0x4c08, 0, 0xffffffff, 0x00000000 },
+ { 0x4c0c, 0, 0x0007fc00, 0x00000000 },
+ { 0x4c10, 0, 0x80003fe0, 0x00000000 },
+ { 0x4c14, 0, 0xffffffff, 0x00000000 },
+ { 0x4c44, 0, 0x00000000, 0x9fff9fff },
+ { 0x4c48, 0, 0x00000000, 0xb3009fff },
+ { 0x4c4c, 0, 0x00000000, 0x77f33b30 },
+ { 0x4c50, 0, 0x00000000, 0xffffffff },
+
+ { 0x5004, 0, 0x00000000, 0x0000007f },
+ { 0x5008, 0, 0x0f0007ff, 0x00000000 },
+ { 0x500c, 0, 0xf800f800, 0x07ff07ff },
+
+ { 0x5400, 0, 0x00000008, 0x00000001 },
+ { 0x5404, 0, 0x00000000, 0x0000003f },
+ { 0x5408, 0, 0x0000001f, 0x00000000 },
+ { 0x540c, 0, 0xffffffff, 0x00000000 },
+ { 0x5410, 0, 0xffffffff, 0x00000000 },
+ { 0x5414, 0, 0x0000ffff, 0x00000000 },
+ { 0x5418, 0, 0x0000ffff, 0x00000000 },
+ { 0x541c, 0, 0x0000ffff, 0x00000000 },
+ { 0x5420, 0, 0x0000ffff, 0x00000000 },
+ { 0x5428, 0, 0x000000ff, 0x00000000 },
+ { 0x542c, 0, 0xff00ffff, 0x00000000 },
+ { 0x5430, 0, 0x001fff80, 0x00000000 },
+ { 0x5438, 0, 0xffffffff, 0x00000000 },
+ { 0x543c, 0, 0xffffffff, 0x00000000 },
+ { 0x5440, 0, 0xf800f800, 0x07ff07ff },
+
+ { 0x5c00, 0, 0x00000000, 0x00000001 },
+ { 0x5c04, 0, 0x00000000, 0x0003000f },
+ { 0x5c08, 0, 0x00000003, 0x00000000 },
+ { 0x5c0c, 0, 0x0000fff8, 0x00000000 },
+ { 0x5c10, 0, 0x00000000, 0xffffffff },
+ { 0x5c80, 0, 0x00000000, 0x0f7113f1 },
+ { 0x5c84, 0, 0x00000000, 0x0000f333 },
+ { 0x5c88, 0, 0x00000000, 0x00077373 },
+ { 0x5c8c, 0, 0x00000000, 0x0007f737 },
+
+ { 0x6808, 0, 0x0000ff7f, 0x00000000 },
+ { 0x680c, 0, 0xffffffff, 0x00000000 },
+ { 0x6810, 0, 0xffffffff, 0x00000000 },
+ { 0x6814, 0, 0xffffffff, 0x00000000 },
+ { 0x6818, 0, 0xffffffff, 0x00000000 },
+ { 0x681c, 0, 0xffffffff, 0x00000000 },
+ { 0x6820, 0, 0x00ff00ff, 0x00000000 },
+ { 0x6824, 0, 0x00ff00ff, 0x00000000 },
+ { 0x6828, 0, 0x00ff00ff, 0x00000000 },
+ { 0x682c, 0, 0x03ff03ff, 0x00000000 },
+ { 0x6830, 0, 0x03ff03ff, 0x00000000 },
+ { 0x6834, 0, 0x03ff03ff, 0x00000000 },
+ { 0x6838, 0, 0x03ff03ff, 0x00000000 },
+ { 0x683c, 0, 0x0000ffff, 0x00000000 },
+ { 0x6840, 0, 0x00000ff0, 0x00000000 },
+ { 0x6844, 0, 0x00ffff00, 0x00000000 },
+ { 0x684c, 0, 0xffffffff, 0x00000000 },
+ { 0x6850, 0, 0x7f7f7f7f, 0x00000000 },
+ { 0x6854, 0, 0x7f7f7f7f, 0x00000000 },
+ { 0x6858, 0, 0x7f7f7f7f, 0x00000000 },
+ { 0x685c, 0, 0x7f7f7f7f, 0x00000000 },
+ { 0x6908, 0, 0x00000000, 0x0001ff0f },
+ { 0x690c, 0, 0x00000000, 0x0ffe00f0 },
+
+ { 0xffff, 0, 0x00000000, 0x00000000 },
+ };
+
+ ret = 0;
+ for (i = 0; reg_tbl[i].offset != 0xffff; i++) {
+ u32 offset, rw_mask, ro_mask, save_val, val;
+
+ offset = (u32) reg_tbl[i].offset;
+ rw_mask = reg_tbl[i].rw_mask;
+ ro_mask = reg_tbl[i].ro_mask;
+
+ save_val = readl((u8 *) bp->regview + offset);
+
+ writel(0, (u8 *) bp->regview + offset);
+
+ val = readl((u8 *) bp->regview + offset);
+ if ((val & rw_mask) != 0) {
+ goto reg_test_err;
+ }
+
+ if ((val & ro_mask) != (save_val & ro_mask)) {
+ goto reg_test_err;
+ }
+
+ writel(0xffffffff, (u8 *) bp->regview + offset);
+
+ val = readl((u8 *) bp->regview + offset);
+ if ((val & rw_mask) != rw_mask) {
+ goto reg_test_err;
+ }
+
+ if ((val & ro_mask) != (save_val & ro_mask)) {
+ goto reg_test_err;
+ }
+
+ writel(save_val, (u8 *) bp->regview + offset);
+ continue;
+
+reg_test_err:
+ writel(save_val, (u8 *) bp->regview + offset);
+ ret = -ENODEV;
+ break;
+ }
+ return ret;
+}
+
+static int
+bnx2_do_mem_test(struct bnx2 *bp, u32 start, u32 size)
+{
+ static u32 test_pattern[] = { 0x00000000, 0xffffffff, 0x55555555,
+ 0xaaaaaaaa , 0xaa55aa55, 0x55aa55aa };
+ int i;
+
+ for (i = 0; i < sizeof(test_pattern) / 4; i++) {
+ u32 offset;
+
+ for (offset = 0; offset < size; offset += 4) {
+
+ REG_WR_IND(bp, start + offset, test_pattern[i]);
+
+ if (REG_RD_IND(bp, start + offset) !=
+ test_pattern[i]) {
+ return -ENODEV;
+ }
+ }
+ }
+ return 0;
+}
+
+static int
+bnx2_test_memory(struct bnx2 *bp)
+{
+ int ret = 0;
+ int i;
+ static struct {
+ u32 offset;
+ u32 len;
+ } mem_tbl[] = {
+ { 0x60000, 0x4000 },
+ { 0xa0000, 0x4000 },
+ { 0xe0000, 0x4000 },
+ { 0x120000, 0x4000 },
+ { 0x1a0000, 0x4000 },
+ { 0x160000, 0x4000 },
+ { 0xffffffff, 0 },
+ };
+
+ for (i = 0; mem_tbl[i].offset != 0xffffffff; i++) {
+ if ((ret = bnx2_do_mem_test(bp, mem_tbl[i].offset,
+ mem_tbl[i].len)) != 0) {
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static int
+bnx2_test_loopback(struct bnx2 *bp)
+{
+ unsigned int pkt_size, num_pkts, i;
+ struct sk_buff *skb, *rx_skb;
+ unsigned char *packet;
+ u16 rx_start_idx, rx_idx, send_idx;
+ u32 send_bseq, val;
+ dma_addr_t map;
+ struct tx_bd *txbd;
+ struct sw_bd *rx_buf;
+ struct l2_fhdr *rx_hdr;
+ int ret = -ENODEV;
+
+ if (!netif_running(bp->dev))
+ return -ENODEV;
+
+ bp->loopback = MAC_LOOPBACK;
+ bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_DIAG);
+ bnx2_set_mac_loopback(bp);
+
+ pkt_size = 1514;
+ skb = dev_alloc_skb(pkt_size);
+ packet = skb_put(skb, pkt_size);
+ memcpy(packet, bp->mac_addr, 6);
+ memset(packet + 6, 0x0, 8);
+ for (i = 14; i < pkt_size; i++)
+ packet[i] = (unsigned char) (i & 0xff);
+
+ map = pci_map_single(bp->pdev, skb->data, pkt_size,
+ PCI_DMA_TODEVICE);
+
+ val = REG_RD(bp, BNX2_HC_COMMAND);
+ REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW_WO_INT);
+ REG_RD(bp, BNX2_HC_COMMAND);
+
+ udelay(5);
+ rx_start_idx = bp->status_blk->status_rx_quick_consumer_index0;
+
+ send_idx = 0;
+ send_bseq = 0;
+ num_pkts = 0;
+
+ txbd = &bp->tx_desc_ring[send_idx];
+
+ txbd->tx_bd_haddr_hi = (u64) map >> 32;
+ txbd->tx_bd_haddr_lo = (u64) map & 0xffffffff;
+ txbd->tx_bd_mss_nbytes = pkt_size;
+ txbd->tx_bd_vlan_tag_flags = TX_BD_FLAGS_START | TX_BD_FLAGS_END;
+
+ num_pkts++;
+ send_idx = NEXT_TX_BD(send_idx);
+
+ send_bseq += pkt_size;
+
+ REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, send_idx);
+ REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, send_bseq);
+
+
+ udelay(100);
+
+ val = REG_RD(bp, BNX2_HC_COMMAND);
+ REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW_WO_INT);
+ REG_RD(bp, BNX2_HC_COMMAND);
+
+ udelay(5);
+
+ pci_unmap_single(bp->pdev, map, pkt_size, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(skb);
+
+ if (bp->status_blk->status_tx_quick_consumer_index0 != send_idx) {
+ goto loopback_test_done;
+ }
+
+ rx_idx = bp->status_blk->status_rx_quick_consumer_index0;
+ if (rx_idx != rx_start_idx + num_pkts) {
+ goto loopback_test_done;
+ }
+
+ rx_buf = &bp->rx_buf_ring[rx_start_idx];
+ rx_skb = rx_buf->skb;
+
+ rx_hdr = (struct l2_fhdr *) rx_skb->data;
+ skb_reserve(rx_skb, bp->rx_offset);
+
+ pci_dma_sync_single_for_cpu(bp->pdev,
+ pci_unmap_addr(rx_buf, mapping),
+ bp->rx_buf_size, PCI_DMA_FROMDEVICE);
+
+ if (rx_hdr->l2_fhdr_errors &
+ (L2_FHDR_ERRORS_BAD_CRC |
+ L2_FHDR_ERRORS_PHY_DECODE |
+ L2_FHDR_ERRORS_ALIGNMENT |
+ L2_FHDR_ERRORS_TOO_SHORT |
+ L2_FHDR_ERRORS_GIANT_FRAME)) {
+
+ goto loopback_test_done;
+ }
+
+ if ((rx_hdr->l2_fhdr_pkt_len - 4) != pkt_size) {
+ goto loopback_test_done;
+ }
+
+ for (i = 14; i < pkt_size; i++) {
+ if (*(rx_skb->data + i) != (unsigned char) (i & 0xff)) {
+ goto loopback_test_done;
+ }
+ }
+
+ ret = 0;
+
+loopback_test_done:
+ bp->loopback = 0;
+ return ret;
+}
+
+#define NVRAM_SIZE 0x200
+#define CRC32_RESIDUAL 0xdebb20e3
+
+static int
+bnx2_test_nvram(struct bnx2 *bp)
+{
+ u32 buf[NVRAM_SIZE / 4];
+ u8 *data = (u8 *) buf;
+ int rc = 0;
+ u32 magic, csum;
+
+ if ((rc = bnx2_nvram_read(bp, 0, data, 4)) != 0)
+ goto test_nvram_done;
+
+ magic = be32_to_cpu(buf[0]);
+ if (magic != 0x669955aa) {
+ rc = -ENODEV;
+ goto test_nvram_done;
+ }
+
+ if ((rc = bnx2_nvram_read(bp, 0x100, data, NVRAM_SIZE)) != 0)
+ goto test_nvram_done;
+
+ csum = ether_crc_le(0x100, data);
+ if (csum != CRC32_RESIDUAL) {
+ rc = -ENODEV;
+ goto test_nvram_done;
+ }
+
+ csum = ether_crc_le(0x100, data + 0x100);
+ if (csum != CRC32_RESIDUAL) {
+ rc = -ENODEV;
+ }
+
+test_nvram_done:
+ return rc;
+}
+
+static int
+bnx2_test_link(struct bnx2 *bp)
+{
+ u32 bmsr;
+
+ spin_lock_irq(&bp->phy_lock);
+ bnx2_read_phy(bp, MII_BMSR, &bmsr);
+ bnx2_read_phy(bp, MII_BMSR, &bmsr);
+ spin_unlock_irq(&bp->phy_lock);
+
+ if (bmsr & BMSR_LSTATUS) {
+ return 0;
+ }
+ return -ENODEV;
+}
+
+static int
+bnx2_test_intr(struct bnx2 *bp)
+{
+ int i;
+ u32 val;
+ u16 status_idx;
+
+ if (!netif_running(bp->dev))
+ return -ENODEV;
+
+ status_idx = REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD) & 0xffff;
+
+ /* This register is not touched during run-time. */
+ val = REG_RD(bp, BNX2_HC_COMMAND);
+ REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW);
+ REG_RD(bp, BNX2_HC_COMMAND);
+
+ for (i = 0; i < 10; i++) {
+ if ((REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD) & 0xffff) !=
+ status_idx) {
+
+ break;
+ }
+
+ msleep_interruptible(10);
+ }
+ if (i < 10)
+ return 0;
+
+ return -ENODEV;
+}
+
+static void
+bnx2_timer(unsigned long data)
+{
+ struct bnx2 *bp = (struct bnx2 *) data;
+ u32 msg;
+
+ if (atomic_read(&bp->intr_sem) != 0)
+ goto bnx2_restart_timer;
+
+ msg = (u32) ++bp->fw_drv_pulse_wr_seq;
+ REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_PULSE_MB, msg);
+
+ if ((bp->phy_flags & PHY_SERDES_FLAG) &&
+ (CHIP_NUM(bp) == CHIP_NUM_5706)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&bp->phy_lock, flags);
+ if (bp->serdes_an_pending) {
+ bp->serdes_an_pending--;
+ }
+ else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) {
+ u32 bmcr;
+
+ bnx2_read_phy(bp, MII_BMCR, &bmcr);
+
+ if (bmcr & BMCR_ANENABLE) {
+ u32 phy1, phy2;
+
+ bnx2_write_phy(bp, 0x1c, 0x7c00);
+ bnx2_read_phy(bp, 0x1c, &phy1);
+
+ bnx2_write_phy(bp, 0x17, 0x0f01);
+ bnx2_read_phy(bp, 0x15, &phy2);
+ bnx2_write_phy(bp, 0x17, 0x0f01);
+ bnx2_read_phy(bp, 0x15, &phy2);
+
+ if ((phy1 & 0x10) && /* SIGNAL DETECT */
+ !(phy2 & 0x20)) { /* no CONFIG */
+
+ bmcr &= ~BMCR_ANENABLE;
+ bmcr |= BMCR_SPEED1000 |
+ BMCR_FULLDPLX;
+ bnx2_write_phy(bp, MII_BMCR, bmcr);
+ bp->phy_flags |=
+ PHY_PARALLEL_DETECT_FLAG;
+ }
+ }
+ }
+ else if ((bp->link_up) && (bp->autoneg & AUTONEG_SPEED) &&
+ (bp->phy_flags & PHY_PARALLEL_DETECT_FLAG)) {
+ u32 phy2;
+
+ bnx2_write_phy(bp, 0x17, 0x0f01);
+ bnx2_read_phy(bp, 0x15, &phy2);
+ if (phy2 & 0x20) {
+ u32 bmcr;
+
+ bnx2_read_phy(bp, MII_BMCR, &bmcr);
+ bmcr |= BMCR_ANENABLE;
+ bnx2_write_phy(bp, MII_BMCR, bmcr);
+
+ bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG;
+
+ }
+ }
+
+ spin_unlock_irqrestore(&bp->phy_lock, flags);
+ }
+
+bnx2_restart_timer:
+ bp->timer.expires = RUN_AT(bp->timer_interval);
+
+ add_timer(&bp->timer);
+}
+
+/* Called with rtnl_lock */
+static int
+bnx2_open(struct net_device *dev)
+{
+ struct bnx2 *bp = dev->priv;
+ int rc;
+
+ bnx2_set_power_state(bp, 0);
+ bnx2_disable_int(bp);
+
+ rc = bnx2_alloc_mem(bp);
+ if (rc)
+ return rc;
+
+ if ((CHIP_ID(bp) != CHIP_ID_5706_A0) &&
+ (CHIP_ID(bp) != CHIP_ID_5706_A1) &&
+ !disable_msi) {
+
+ if (pci_enable_msi(bp->pdev) == 0) {
+ bp->flags |= USING_MSI_FLAG;
+ rc = request_irq(bp->pdev->irq, bnx2_msi, 0, dev->name,
+ dev);
+ }
+ else {
+ rc = request_irq(bp->pdev->irq, bnx2_interrupt,
+ SA_SHIRQ, dev->name, dev);
+ }
+ }
+ else {
+ rc = request_irq(bp->pdev->irq, bnx2_interrupt, SA_SHIRQ,
+ dev->name, dev);
+ }
+ if (rc) {
+ bnx2_free_mem(bp);
+ return rc;
+ }
+
+ rc = bnx2_init_nic(bp);
+
+ if (rc) {
+ free_irq(bp->pdev->irq, dev);
+ if (bp->flags & USING_MSI_FLAG) {
+ pci_disable_msi(bp->pdev);
+ bp->flags &= ~USING_MSI_FLAG;
+ }
+ bnx2_free_skbs(bp);
+ bnx2_free_mem(bp);
+ return rc;
+ }
+
+ init_timer(&bp->timer);
+
+ bp->timer.expires = RUN_AT(bp->timer_interval);
+ bp->timer.data = (unsigned long) bp;
+ bp->timer.function = bnx2_timer;
+ add_timer(&bp->timer);
+
+ atomic_set(&bp->intr_sem, 0);
+
+ bnx2_enable_int(bp);
+
+ if (bp->flags & USING_MSI_FLAG) {
+ /* Test MSI to make sure it is working
+ * If MSI test fails, go back to INTx mode
+ */
+ if (bnx2_test_intr(bp) != 0) {
+ printk(KERN_WARNING PFX "%s: No interrupt was generated"
+ " using MSI, switching to INTx mode. Please"
+ " report this failure to the PCI maintainer"
+ " and include system chipset information.\n",
+ bp->dev->name);
+
+ bnx2_disable_int(bp);
+ free_irq(bp->pdev->irq, dev);
+ pci_disable_msi(bp->pdev);
+ bp->flags &= ~USING_MSI_FLAG;
+
+ rc = bnx2_init_nic(bp);
+
+ if (!rc) {
+ rc = request_irq(bp->pdev->irq, bnx2_interrupt,
+ SA_SHIRQ, dev->name, dev);
+ }
+ if (rc) {
+ bnx2_free_skbs(bp);
+ bnx2_free_mem(bp);
+ del_timer_sync(&bp->timer);
+ return rc;
+ }
+ bnx2_enable_int(bp);
+ }
+ }
+ if (bp->flags & USING_MSI_FLAG) {
+ printk(KERN_INFO PFX "%s: using MSI\n", dev->name);
+ }
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static void
+bnx2_reset_task(void *data)
+{
+ struct bnx2 *bp = data;
+
+ bnx2_netif_stop(bp);
+
+ bnx2_init_nic(bp);
+
+ atomic_set(&bp->intr_sem, 1);
+ bnx2_netif_start(bp);
+}
+
+static void
+bnx2_tx_timeout(struct net_device *dev)
+{
+ struct bnx2 *bp = dev->priv;
+
+ /* This allows the netif to be shutdown gracefully before resetting */
+ schedule_work(&bp->reset_task);
+}
+
+#ifdef BCM_VLAN
+/* Called with rtnl_lock */
+static void
+bnx2_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp)
+{
+ struct bnx2 *bp = dev->priv;
+
+ bnx2_netif_stop(bp);
+
+ bp->vlgrp = vlgrp;
+ bnx2_set_rx_mode(dev);
+
+ bnx2_netif_start(bp);
+}
+
+/* Called with rtnl_lock */
+static void
+bnx2_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid)
+{
+ struct bnx2 *bp = dev->priv;
+
+ bnx2_netif_stop(bp);
+
+ if (bp->vlgrp)
+ bp->vlgrp->vlan_devices[vid] = NULL;
+ bnx2_set_rx_mode(dev);
+
+ bnx2_netif_start(bp);
+}
+#endif
+
+/* Called with dev->xmit_lock.
+ * hard_start_xmit is pseudo-lockless - a lock is only required when
+ * the tx queue is full. This way, we get the benefit of lockless
+ * operations most of the time without the complexities to handle
+ * netif_stop_queue/wake_queue race conditions.
+ */
+static int
+bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct bnx2 *bp = dev->priv;
+ dma_addr_t mapping;
+ struct tx_bd *txbd;
+ struct sw_bd *tx_buf;
+ u32 len, vlan_tag_flags, last_frag, mss;
+ u16 prod, ring_prod;
+ int i;
+
+ if (unlikely(atomic_read(&bp->tx_avail_bd) <
+ (skb_shinfo(skb)->nr_frags + 1))) {
+
+ netif_stop_queue(dev);
+ printk(KERN_ERR PFX "%s: BUG! Tx ring full when queue awake!\n",
+ dev->name);
+
+ return NETDEV_TX_BUSY;
+ }
+ len = skb_headlen(skb);
+ prod = bp->tx_prod;
+ ring_prod = TX_RING_IDX(prod);
+
+ vlan_tag_flags = 0;
+ if (skb->ip_summed == CHECKSUM_HW) {
+ vlan_tag_flags |= TX_BD_FLAGS_TCP_UDP_CKSUM;
+ }
+
+ if (bp->vlgrp != 0 && vlan_tx_tag_present(skb)) {
+ vlan_tag_flags |=
+ (TX_BD_FLAGS_VLAN_TAG | (vlan_tx_tag_get(skb) << 16));
+ }
+#ifdef BCM_TSO
+ if ((mss = skb_shinfo(skb)->tso_size) &&
+ (skb->len > (bp->dev->mtu + ETH_HLEN))) {
+ u32 tcp_opt_len, ip_tcp_len;
+
+ if (skb_header_cloned(skb) &&
+ pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ tcp_opt_len = ((skb->h.th->doff - 5) * 4);
+ vlan_tag_flags |= TX_BD_FLAGS_SW_LSO;
+
+ tcp_opt_len = 0;
+ if (skb->h.th->doff > 5) {
+ tcp_opt_len = (skb->h.th->doff - 5) << 2;
+ }
+ ip_tcp_len = (skb->nh.iph->ihl << 2) + sizeof(struct tcphdr);
+
+ skb->nh.iph->check = 0;
+ skb->nh.iph->tot_len = ntohs(mss + ip_tcp_len + tcp_opt_len);
+ skb->h.th->check =
+ ~csum_tcpudp_magic(skb->nh.iph->saddr,
+ skb->nh.iph->daddr,
+ 0, IPPROTO_TCP, 0);
+
+ if (tcp_opt_len || (skb->nh.iph->ihl > 5)) {
+ vlan_tag_flags |= ((skb->nh.iph->ihl - 5) +
+ (tcp_opt_len >> 2)) << 8;
+ }
+ }
+ else
+#endif
+ {
+ mss = 0;
+ }
+
+ mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
+
+ tx_buf = &bp->tx_buf_ring[ring_prod];
+ tx_buf->skb = skb;
+ pci_unmap_addr_set(tx_buf, mapping, mapping);
+
+ txbd = &bp->tx_desc_ring[ring_prod];
+
+ txbd->tx_bd_haddr_hi = (u64) mapping >> 32;
+ txbd->tx_bd_haddr_lo = (u64) mapping & 0xffffffff;
+ txbd->tx_bd_mss_nbytes = len | (mss << 16);
+ txbd->tx_bd_vlan_tag_flags = vlan_tag_flags | TX_BD_FLAGS_START;
+
+ last_frag = skb_shinfo(skb)->nr_frags;
+
+ for (i = 0; i < last_frag; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+ prod = NEXT_TX_BD(prod);
+ ring_prod = TX_RING_IDX(prod);
+ txbd = &bp->tx_desc_ring[ring_prod];
+
+ len = frag->size;
+ mapping = pci_map_page(bp->pdev, frag->page, frag->page_offset,
+ len, PCI_DMA_TODEVICE);
+ pci_unmap_addr_set(&bp->tx_buf_ring[ring_prod],
+ mapping, mapping);
+
+ txbd->tx_bd_haddr_hi = (u64) mapping >> 32;
+ txbd->tx_bd_haddr_lo = (u64) mapping & 0xffffffff;
+ txbd->tx_bd_mss_nbytes = len | (mss << 16);
+ txbd->tx_bd_vlan_tag_flags = vlan_tag_flags;
+
+ }
+ txbd->tx_bd_vlan_tag_flags |= TX_BD_FLAGS_END;
+
+ prod = NEXT_TX_BD(prod);
+ bp->tx_prod_bseq += skb->len;
+
+ atomic_sub(last_frag + 1, &bp->tx_avail_bd);
+
+ REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, prod);
+ REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, bp->tx_prod_bseq);
+
+ mmiowb();
+
+ bp->tx_prod = prod;
+ dev->trans_start = jiffies;
+
+ if (unlikely(atomic_read(&bp->tx_avail_bd) <= MAX_SKB_FRAGS)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&bp->tx_lock, flags);
+ if (atomic_read(&bp->tx_avail_bd) <= MAX_SKB_FRAGS) {
+ netif_stop_queue(dev);
+
+ if (atomic_read(&bp->tx_avail_bd) > MAX_SKB_FRAGS)
+ netif_wake_queue(dev);
+ }
+ spin_unlock_irqrestore(&bp->tx_lock, flags);
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/* Called with rtnl_lock */
+static int
+bnx2_close(struct net_device *dev)
+{
+ struct bnx2 *bp = dev->priv;
+ u32 reset_code;
+
+ flush_scheduled_work();
+ bnx2_netif_stop(bp);
+ del_timer_sync(&bp->timer);
+ if (bp->wol)
+ reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL;
+ else
+ reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
+ bnx2_reset_chip(bp, reset_code);
+ free_irq(bp->pdev->irq, dev);
+ if (bp->flags & USING_MSI_FLAG) {
+ pci_disable_msi(bp->pdev);
+ bp->flags &= ~USING_MSI_FLAG;
+ }
+ bnx2_free_skbs(bp);
+ bnx2_free_mem(bp);
+ bp->link_up = 0;
+ netif_carrier_off(bp->dev);
+ bnx2_set_power_state(bp, 3);
+ return 0;
+}
+
+#define GET_NET_STATS64(ctr) \
+ (unsigned long) ((unsigned long) (ctr##_hi) << 32) + \
+ (unsigned long) (ctr##_lo)
+
+#define GET_NET_STATS32(ctr) \
+ (ctr##_lo)
+
+#if (BITS_PER_LONG == 64)
+#define GET_NET_STATS GET_NET_STATS64
+#else
+#define GET_NET_STATS GET_NET_STATS32
+#endif
+
+static struct net_device_stats *
+bnx2_get_stats(struct net_device *dev)
+{
+ struct bnx2 *bp = dev->priv;
+ struct statistics_block *stats_blk = bp->stats_blk;
+ struct net_device_stats *net_stats = &bp->net_stats;
+
+ if (bp->stats_blk == NULL) {
+ return net_stats;
+ }
+ net_stats->rx_packets =
+ GET_NET_STATS(stats_blk->stat_IfHCInUcastPkts) +
+ GET_NET_STATS(stats_blk->stat_IfHCInMulticastPkts) +
+ GET_NET_STATS(stats_blk->stat_IfHCInBroadcastPkts);
+
+ net_stats->tx_packets =
+ GET_NET_STATS(stats_blk->stat_IfHCOutUcastPkts) +
+ GET_NET_STATS(stats_blk->stat_IfHCOutMulticastPkts) +
+ GET_NET_STATS(stats_blk->stat_IfHCOutBroadcastPkts);
+
+ net_stats->rx_bytes =
+ GET_NET_STATS(stats_blk->stat_IfHCInOctets);
+
+ net_stats->tx_bytes =
+ GET_NET_STATS(stats_blk->stat_IfHCOutOctets);
+
+ net_stats->multicast =
+ GET_NET_STATS(stats_blk->stat_IfHCOutMulticastPkts);
+
+ net_stats->collisions =
+ (unsigned long) stats_blk->stat_EtherStatsCollisions;
+
+ net_stats->rx_length_errors =
+ (unsigned long) (stats_blk->stat_EtherStatsUndersizePkts +
+ stats_blk->stat_EtherStatsOverrsizePkts);
+
+ net_stats->rx_over_errors =
+ (unsigned long) stats_blk->stat_IfInMBUFDiscards;
+
+ net_stats->rx_frame_errors =
+ (unsigned long) stats_blk->stat_Dot3StatsAlignmentErrors;
+
+ net_stats->rx_crc_errors =
+ (unsigned long) stats_blk->stat_Dot3StatsFCSErrors;
+
+ net_stats->rx_errors = net_stats->rx_length_errors +
+ net_stats->rx_over_errors + net_stats->rx_frame_errors +
+ net_stats->rx_crc_errors;
+
+ net_stats->tx_aborted_errors =
+ (unsigned long) (stats_blk->stat_Dot3StatsExcessiveCollisions +
+ stats_blk->stat_Dot3StatsLateCollisions);
+
+ if (CHIP_NUM(bp) == CHIP_NUM_5706)
+ net_stats->tx_carrier_errors = 0;
+ else {
+ net_stats->tx_carrier_errors =
+ (unsigned long)
+ stats_blk->stat_Dot3StatsCarrierSenseErrors;
+ }
+
+ net_stats->tx_errors =
+ (unsigned long)
+ stats_blk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors
+ +
+ net_stats->tx_aborted_errors +
+ net_stats->tx_carrier_errors;
+
+ return net_stats;
+}
+
+/* All ethtool functions called with rtnl_lock */
+
+static int
+bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct bnx2 *bp = dev->priv;
+
+ cmd->supported = SUPPORTED_Autoneg;
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ cmd->supported |= SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE;
+
+ cmd->port = PORT_FIBRE;
+ }
+ else {
+ cmd->supported |= SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_TP;
+
+ cmd->port = PORT_TP;
+ }
+
+ cmd->advertising = bp->advertising;
+
+ if (bp->autoneg & AUTONEG_SPEED) {
+ cmd->autoneg = AUTONEG_ENABLE;
+ }
+ else {
+ cmd->autoneg = AUTONEG_DISABLE;
+ }
+
+ if (netif_carrier_ok(dev)) {
+ cmd->speed = bp->line_speed;
+ cmd->duplex = bp->duplex;
+ }
+ else {
+ cmd->speed = -1;
+ cmd->duplex = -1;
+ }
+
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->phy_address = bp->phy_addr;
+
+ return 0;
+}
+
+static int
+bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct bnx2 *bp = dev->priv;
+ u8 autoneg = bp->autoneg;
+ u8 req_duplex = bp->req_duplex;
+ u16 req_line_speed = bp->req_line_speed;
+ u32 advertising = bp->advertising;
+
+ if (cmd->autoneg == AUTONEG_ENABLE) {
+ autoneg |= AUTONEG_SPEED;
+
+ cmd->advertising &= ETHTOOL_ALL_COPPER_SPEED;
+
+ /* allow advertising 1 speed */
+ if ((cmd->advertising == ADVERTISED_10baseT_Half) ||
+ (cmd->advertising == ADVERTISED_10baseT_Full) ||
+ (cmd->advertising == ADVERTISED_100baseT_Half) ||
+ (cmd->advertising == ADVERTISED_100baseT_Full)) {
+
+ if (bp->phy_flags & PHY_SERDES_FLAG)
+ return -EINVAL;
+
+ advertising = cmd->advertising;
+
+ }
+ else if (cmd->advertising == ADVERTISED_1000baseT_Full) {
+ advertising = cmd->advertising;
+ }
+ else if (cmd->advertising == ADVERTISED_1000baseT_Half) {
+ return -EINVAL;
+ }
+ else {
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ advertising = ETHTOOL_ALL_FIBRE_SPEED;
+ }
+ else {
+ advertising = ETHTOOL_ALL_COPPER_SPEED;
+ }
+ }
+ advertising |= ADVERTISED_Autoneg;
+ }
+ else {
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ if ((cmd->speed != SPEED_1000) ||
+ (cmd->duplex != DUPLEX_FULL)) {
+ return -EINVAL;
+ }
+ }
+ else if (cmd->speed == SPEED_1000) {
+ return -EINVAL;
+ }
+ autoneg &= ~AUTONEG_SPEED;
+ req_line_speed = cmd->speed;
+ req_duplex = cmd->duplex;
+ advertising = 0;
+ }
+
+ bp->autoneg = autoneg;
+ bp->advertising = advertising;
+ bp->req_line_speed = req_line_speed;
+ bp->req_duplex = req_duplex;
+
+ spin_lock_irq(&bp->phy_lock);
+
+ bnx2_setup_phy(bp);
+
+ spin_unlock_irq(&bp->phy_lock);
+
+ return 0;
+}
+
+static void
+bnx2_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct bnx2 *bp = dev->priv;
+
+ strcpy(info->driver, DRV_MODULE_NAME);
+ strcpy(info->version, DRV_MODULE_VERSION);
+ strcpy(info->bus_info, pci_name(bp->pdev));
+ info->fw_version[0] = ((bp->fw_ver & 0xff000000) >> 24) + '0';
+ info->fw_version[2] = ((bp->fw_ver & 0xff0000) >> 16) + '0';
+ info->fw_version[4] = ((bp->fw_ver & 0xff00) >> 8) + '0';
+ info->fw_version[6] = (bp->fw_ver & 0xff) + '0';
+ info->fw_version[1] = info->fw_version[3] = info->fw_version[5] = '.';
+ info->fw_version[7] = 0;
+}
+
+static void
+bnx2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct bnx2 *bp = dev->priv;
+
+ if (bp->flags & NO_WOL_FLAG) {
+ wol->supported = 0;
+ wol->wolopts = 0;
+ }
+ else {
+ wol->supported = WAKE_MAGIC;
+ if (bp->wol)
+ wol->wolopts = WAKE_MAGIC;
+ else
+ wol->wolopts = 0;
+ }
+ memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+
+static int
+bnx2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct bnx2 *bp = dev->priv;
+
+ if (wol->wolopts & ~WAKE_MAGIC)
+ return -EINVAL;
+
+ if (wol->wolopts & WAKE_MAGIC) {
+ if (bp->flags & NO_WOL_FLAG)
+ return -EINVAL;
+
+ bp->wol = 1;
+ }
+ else {
+ bp->wol = 0;
+ }
+ return 0;
+}
+
+static int
+bnx2_nway_reset(struct net_device *dev)
+{
+ struct bnx2 *bp = dev->priv;
+ u32 bmcr;
+
+ if (!(bp->autoneg & AUTONEG_SPEED)) {
+ return -EINVAL;
+ }
+
+ spin_lock_irq(&bp->phy_lock);
+
+ /* Force a link down visible on the other side */
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK);
+ spin_unlock_irq(&bp->phy_lock);
+
+ msleep(20);
+
+ spin_lock_irq(&bp->phy_lock);
+ if (CHIP_NUM(bp) == CHIP_NUM_5706) {
+ bp->serdes_an_pending = SERDES_AN_TIMEOUT /
+ bp->timer_interval;
+ }
+ }
+
+ bnx2_read_phy(bp, MII_BMCR, &bmcr);
+ bmcr &= ~BMCR_LOOPBACK;
+ bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART | BMCR_ANENABLE);
+
+ spin_unlock_irq(&bp->phy_lock);
+
+ return 0;
+}
+
+static int
+bnx2_get_eeprom_len(struct net_device *dev)
+{
+ struct bnx2 *bp = dev->priv;
+
+ if (bp->flash_info == 0)
+ return 0;
+
+ return (int) bp->flash_info->total_size;
+}
+
+static int
+bnx2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+ u8 *eebuf)
+{
+ struct bnx2 *bp = dev->priv;
+ int rc;
+
+ if (eeprom->offset > bp->flash_info->total_size)
+ return -EINVAL;
+
+ if ((eeprom->offset + eeprom->len) > bp->flash_info->total_size)
+ eeprom->len = bp->flash_info->total_size - eeprom->offset;
+
+ rc = bnx2_nvram_read(bp, eeprom->offset, eebuf, eeprom->len);
+
+ return rc;
+}
+
+static int
+bnx2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+ u8 *eebuf)
+{
+ struct bnx2 *bp = dev->priv;
+ int rc;
+
+ if (eeprom->offset > bp->flash_info->total_size)
+ return -EINVAL;
+
+ if ((eeprom->offset + eeprom->len) > bp->flash_info->total_size)
+ eeprom->len = bp->flash_info->total_size - eeprom->offset;
+
+ rc = bnx2_nvram_write(bp, eeprom->offset, eebuf, eeprom->len);
+
+ return rc;
+}
+
+static int
+bnx2_get_coalesce(struct net_device *dev, struct ethtool_coalesce *coal)
+{
+ struct bnx2 *bp = dev->priv;
+
+ memset(coal, 0, sizeof(struct ethtool_coalesce));
+
+ coal->rx_coalesce_usecs = bp->rx_ticks;
+ coal->rx_max_coalesced_frames = bp->rx_quick_cons_trip;
+ coal->rx_coalesce_usecs_irq = bp->rx_ticks_int;
+ coal->rx_max_coalesced_frames_irq = bp->rx_quick_cons_trip_int;
+
+ coal->tx_coalesce_usecs = bp->tx_ticks;
+ coal->tx_max_coalesced_frames = bp->tx_quick_cons_trip;
+ coal->tx_coalesce_usecs_irq = bp->tx_ticks_int;
+ coal->tx_max_coalesced_frames_irq = bp->tx_quick_cons_trip_int;
+
+ coal->stats_block_coalesce_usecs = bp->stats_ticks;
+
+ return 0;
+}
+
+static int
+bnx2_set_coalesce(struct net_device *dev, struct ethtool_coalesce *coal)
+{
+ struct bnx2 *bp = dev->priv;
+
+ bp->rx_ticks = (u16) coal->rx_coalesce_usecs;
+ if (bp->rx_ticks > 0x3ff) bp->rx_ticks = 0x3ff;
+
+ bp->rx_quick_cons_trip = (u16) coal->rx_max_coalesced_frames;
+ if (bp->rx_quick_cons_trip > 0xff) bp->rx_quick_cons_trip = 0xff;
+
+ bp->rx_ticks_int = (u16) coal->rx_coalesce_usecs_irq;
+ if (bp->rx_ticks_int > 0x3ff) bp->rx_ticks_int = 0x3ff;
+
+ bp->rx_quick_cons_trip_int = (u16) coal->rx_max_coalesced_frames_irq;
+ if (bp->rx_quick_cons_trip_int > 0xff)
+ bp->rx_quick_cons_trip_int = 0xff;
+
+ bp->tx_ticks = (u16) coal->tx_coalesce_usecs;
+ if (bp->tx_ticks > 0x3ff) bp->tx_ticks = 0x3ff;
+
+ bp->tx_quick_cons_trip = (u16) coal->tx_max_coalesced_frames;
+ if (bp->tx_quick_cons_trip > 0xff) bp->tx_quick_cons_trip = 0xff;
+
+ bp->tx_ticks_int = (u16) coal->tx_coalesce_usecs_irq;
+ if (bp->tx_ticks_int > 0x3ff) bp->tx_ticks_int = 0x3ff;
+
+ bp->tx_quick_cons_trip_int = (u16) coal->tx_max_coalesced_frames_irq;
+ if (bp->tx_quick_cons_trip_int > 0xff) bp->tx_quick_cons_trip_int =
+ 0xff;
+
+ bp->stats_ticks = coal->stats_block_coalesce_usecs;
+ if (bp->stats_ticks > 0xffff00) bp->stats_ticks = 0xffff00;
+ bp->stats_ticks &= 0xffff00;
+
+ if (netif_running(bp->dev)) {
+ bnx2_netif_stop(bp);
+ bnx2_init_nic(bp);
+ bnx2_netif_start(bp);
+ }
+
+ return 0;
+}
+
+static void
+bnx2_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
+{
+ struct bnx2 *bp = dev->priv;
+
+ ering->rx_max_pending = MAX_RX_DESC_CNT;
+ ering->rx_mini_max_pending = 0;
+ ering->rx_jumbo_max_pending = 0;
+
+ ering->rx_pending = bp->rx_ring_size;
+ ering->rx_mini_pending = 0;
+ ering->rx_jumbo_pending = 0;
+
+ ering->tx_max_pending = MAX_TX_DESC_CNT;
+ ering->tx_pending = bp->tx_ring_size;
+}
+
+static int
+bnx2_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
+{
+ struct bnx2 *bp = dev->priv;
+
+ if ((ering->rx_pending > MAX_RX_DESC_CNT) ||
+ (ering->tx_pending > MAX_TX_DESC_CNT) ||
+ (ering->tx_pending <= MAX_SKB_FRAGS)) {
+
+ return -EINVAL;
+ }
+ bp->rx_ring_size = ering->rx_pending;
+ bp->tx_ring_size = ering->tx_pending;
+
+ if (netif_running(bp->dev)) {
+ bnx2_netif_stop(bp);
+ bnx2_init_nic(bp);
+ bnx2_netif_start(bp);
+ }
+
+ return 0;
+}
+
+static void
+bnx2_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
+{
+ struct bnx2 *bp = dev->priv;
+
+ epause->autoneg = ((bp->autoneg & AUTONEG_FLOW_CTRL) != 0);
+ epause->rx_pause = ((bp->flow_ctrl & FLOW_CTRL_RX) != 0);
+ epause->tx_pause = ((bp->flow_ctrl & FLOW_CTRL_TX) != 0);
+}
+
+static int
+bnx2_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
+{
+ struct bnx2 *bp = dev->priv;
+
+ bp->req_flow_ctrl = 0;
+ if (epause->rx_pause)
+ bp->req_flow_ctrl |= FLOW_CTRL_RX;
+ if (epause->tx_pause)
+ bp->req_flow_ctrl |= FLOW_CTRL_TX;
+
+ if (epause->autoneg) {
+ bp->autoneg |= AUTONEG_FLOW_CTRL;
+ }
+ else {
+ bp->autoneg &= ~AUTONEG_FLOW_CTRL;
+ }
+
+ spin_lock_irq(&bp->phy_lock);
+
+ bnx2_setup_phy(bp);
+
+ spin_unlock_irq(&bp->phy_lock);
+
+ return 0;
+}
+
+static u32
+bnx2_get_rx_csum(struct net_device *dev)
+{
+ struct bnx2 *bp = dev->priv;
+
+ return bp->rx_csum;
+}
+
+static int
+bnx2_set_rx_csum(struct net_device *dev, u32 data)
+{
+ struct bnx2 *bp = dev->priv;
+
+ bp->rx_csum = data;
+ return 0;
+}
+
+#define BNX2_NUM_STATS 45
+
+struct {
+ char string[ETH_GSTRING_LEN];
+} bnx2_stats_str_arr[BNX2_NUM_STATS] = {
+ { "rx_bytes" },
+ { "rx_error_bytes" },
+ { "tx_bytes" },
+ { "tx_error_bytes" },
+ { "rx_ucast_packets" },
+ { "rx_mcast_packets" },
+ { "rx_bcast_packets" },
+ { "tx_ucast_packets" },
+ { "tx_mcast_packets" },
+ { "tx_bcast_packets" },
+ { "tx_mac_errors" },
+ { "tx_carrier_errors" },
+ { "rx_crc_errors" },
+ { "rx_align_errors" },
+ { "tx_single_collisions" },
+ { "tx_multi_collisions" },
+ { "tx_deferred" },
+ { "tx_excess_collisions" },
+ { "tx_late_collisions" },
+ { "tx_total_collisions" },
+ { "rx_fragments" },
+ { "rx_jabbers" },
+ { "rx_undersize_packets" },
+ { "rx_oversize_packets" },
+ { "rx_64_byte_packets" },
+ { "rx_65_to_127_byte_packets" },
+ { "rx_128_to_255_byte_packets" },
+ { "rx_256_to_511_byte_packets" },
+ { "rx_512_to_1023_byte_packets" },
+ { "rx_1024_to_1522_byte_packets" },
+ { "rx_1523_to_9022_byte_packets" },
+ { "tx_64_byte_packets" },
+ { "tx_65_to_127_byte_packets" },
+ { "tx_128_to_255_byte_packets" },
+ { "tx_256_to_511_byte_packets" },
+ { "tx_512_to_1023_byte_packets" },
+ { "tx_1024_to_1522_byte_packets" },
+ { "tx_1523_to_9022_byte_packets" },
+ { "rx_xon_frames" },
+ { "rx_xoff_frames" },
+ { "tx_xon_frames" },
+ { "tx_xoff_frames" },
+ { "rx_mac_ctrl_frames" },
+ { "rx_filtered_packets" },
+ { "rx_discards" },
+};
+
+#define STATS_OFFSET32(offset_name) (offsetof(struct statistics_block, offset_name) / 4)
+
+unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = {
+ STATS_OFFSET32(stat_IfHCInOctets_hi),
+ STATS_OFFSET32(stat_IfHCInBadOctets_hi),
+ STATS_OFFSET32(stat_IfHCOutOctets_hi),
+ STATS_OFFSET32(stat_IfHCOutBadOctets_hi),
+ STATS_OFFSET32(stat_IfHCInUcastPkts_hi),
+ STATS_OFFSET32(stat_IfHCInMulticastPkts_hi),
+ STATS_OFFSET32(stat_IfHCInBroadcastPkts_hi),
+ STATS_OFFSET32(stat_IfHCOutUcastPkts_hi),
+ STATS_OFFSET32(stat_IfHCOutMulticastPkts_hi),
+ STATS_OFFSET32(stat_IfHCOutBroadcastPkts_hi),
+ STATS_OFFSET32(stat_emac_tx_stat_dot3statsinternalmactransmiterrors),
+ STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors),
+ STATS_OFFSET32(stat_Dot3StatsFCSErrors),
+ STATS_OFFSET32(stat_Dot3StatsAlignmentErrors),
+ STATS_OFFSET32(stat_Dot3StatsSingleCollisionFrames),
+ STATS_OFFSET32(stat_Dot3StatsMultipleCollisionFrames),
+ STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions),
+ STATS_OFFSET32(stat_Dot3StatsExcessiveCollisions),
+ STATS_OFFSET32(stat_Dot3StatsLateCollisions),
+ STATS_OFFSET32(stat_EtherStatsCollisions),
+ STATS_OFFSET32(stat_EtherStatsFragments),
+ STATS_OFFSET32(stat_EtherStatsJabbers),
+ STATS_OFFSET32(stat_EtherStatsUndersizePkts),
+ STATS_OFFSET32(stat_EtherStatsOverrsizePkts),
+ STATS_OFFSET32(stat_EtherStatsPktsRx64Octets),
+ STATS_OFFSET32(stat_EtherStatsPktsRx65Octetsto127Octets),
+ STATS_OFFSET32(stat_EtherStatsPktsRx128Octetsto255Octets),
+ STATS_OFFSET32(stat_EtherStatsPktsRx256Octetsto511Octets),
+ STATS_OFFSET32(stat_EtherStatsPktsRx512Octetsto1023Octets),
+ STATS_OFFSET32(stat_EtherStatsPktsRx1024Octetsto1522Octets),
+ STATS_OFFSET32(stat_EtherStatsPktsRx1523Octetsto9022Octets),
+ STATS_OFFSET32(stat_EtherStatsPktsTx64Octets),
+ STATS_OFFSET32(stat_EtherStatsPktsTx65Octetsto127Octets),
+ STATS_OFFSET32(stat_EtherStatsPktsTx128Octetsto255Octets),
+ STATS_OFFSET32(stat_EtherStatsPktsTx256Octetsto511Octets),
+ STATS_OFFSET32(stat_EtherStatsPktsTx512Octetsto1023Octets),
+ STATS_OFFSET32(stat_EtherStatsPktsTx1024Octetsto1522Octets),
+ STATS_OFFSET32(stat_EtherStatsPktsTx1523Octetsto9022Octets),
+ STATS_OFFSET32(stat_XonPauseFramesReceived),
+ STATS_OFFSET32(stat_XoffPauseFramesReceived),
+ STATS_OFFSET32(stat_OutXonSent),
+ STATS_OFFSET32(stat_OutXoffSent),
+ STATS_OFFSET32(stat_MacControlFramesReceived),
+ STATS_OFFSET32(stat_IfInFramesL2FilterDiscards),
+ STATS_OFFSET32(stat_IfInMBUFDiscards),
+};
+
+/* stat_IfHCInBadOctets and stat_Dot3StatsCarrierSenseErrors are
+ * skipped because of errata.
+ */
+u8 bnx2_5706_stats_len_arr[BNX2_NUM_STATS] = {
+ 8,0,8,8,8,8,8,8,8,8,
+ 4,0,4,4,4,4,4,4,4,4,
+ 4,4,4,4,4,4,4,4,4,4,
+ 4,4,4,4,4,4,4,4,4,4,
+ 4,4,4,4,4,
+};
+
+#define BNX2_NUM_TESTS 6
+
+struct {
+ char string[ETH_GSTRING_LEN];
+} bnx2_tests_str_arr[BNX2_NUM_TESTS] = {
+ { "register_test (offline)" },
+ { "memory_test (offline)" },
+ { "loopback_test (offline)" },
+ { "nvram_test (online)" },
+ { "interrupt_test (online)" },
+ { "link_test (online)" },
+};
+
+static int
+bnx2_self_test_count(struct net_device *dev)
+{
+ return BNX2_NUM_TESTS;
+}
+
+static void
+bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf)
+{
+ struct bnx2 *bp = dev->priv;
+
+ memset(buf, 0, sizeof(u64) * BNX2_NUM_TESTS);
+ if (etest->flags & ETH_TEST_FL_OFFLINE) {
+ bnx2_netif_stop(bp);
+ bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_DIAG);
+ bnx2_free_skbs(bp);
+
+ if (bnx2_test_registers(bp) != 0) {
+ buf[0] = 1;
+ etest->flags |= ETH_TEST_FL_FAILED;
+ }
+ if (bnx2_test_memory(bp) != 0) {
+ buf[1] = 1;
+ etest->flags |= ETH_TEST_FL_FAILED;
+ }
+ if (bnx2_test_loopback(bp) != 0) {
+ buf[2] = 1;
+ etest->flags |= ETH_TEST_FL_FAILED;
+ }
+
+ if (!netif_running(bp->dev)) {
+ bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET);
+ }
+ else {
+ bnx2_init_nic(bp);
+ bnx2_netif_start(bp);
+ }
+
+ /* wait for link up */
+ msleep_interruptible(3000);
+ if ((!bp->link_up) && !(bp->phy_flags & PHY_SERDES_FLAG))
+ msleep_interruptible(4000);
+ }
+
+ if (bnx2_test_nvram(bp) != 0) {
+ buf[3] = 1;
+ etest->flags |= ETH_TEST_FL_FAILED;
+ }
+ if (bnx2_test_intr(bp) != 0) {
+ buf[4] = 1;
+ etest->flags |= ETH_TEST_FL_FAILED;
+ }
+
+ if (bnx2_test_link(bp) != 0) {
+ buf[5] = 1;
+ etest->flags |= ETH_TEST_FL_FAILED;
+
+ }
+}
+
+static void
+bnx2_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
+{
+ switch (stringset) {
+ case ETH_SS_STATS:
+ memcpy(buf, bnx2_stats_str_arr,
+ sizeof(bnx2_stats_str_arr));
+ break;
+ case ETH_SS_TEST:
+ memcpy(buf, bnx2_tests_str_arr,
+ sizeof(bnx2_tests_str_arr));
+ break;
+ }
+}
+
+static int
+bnx2_get_stats_count(struct net_device *dev)
+{
+ return BNX2_NUM_STATS;
+}
+
+static void
+bnx2_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *buf)
+{
+ struct bnx2 *bp = dev->priv;
+ int i;
+ u32 *hw_stats = (u32 *) bp->stats_blk;
+ u8 *stats_len_arr = 0;
+
+ if (hw_stats == NULL) {
+ memset(buf, 0, sizeof(u64) * BNX2_NUM_STATS);
+ return;
+ }
+
+ if (CHIP_NUM(bp) == CHIP_NUM_5706)
+ stats_len_arr = bnx2_5706_stats_len_arr;
+
+ for (i = 0; i < BNX2_NUM_STATS; i++) {
+ if (stats_len_arr[i] == 0) {
+ /* skip this counter */
+ buf[i] = 0;
+ continue;
+ }
+ if (stats_len_arr[i] == 4) {
+ /* 4-byte counter */
+ buf[i] = (u64)
+ *(hw_stats + bnx2_stats_offset_arr[i]);
+ continue;
+ }
+ /* 8-byte counter */
+ buf[i] = (((u64) *(hw_stats +
+ bnx2_stats_offset_arr[i])) << 32) +
+ *(hw_stats + bnx2_stats_offset_arr[i] + 1);
+ }
+}
+
+static int
+bnx2_phys_id(struct net_device *dev, u32 data)
+{
+ struct bnx2 *bp = dev->priv;
+ int i;
+ u32 save;
+
+ if (data == 0)
+ data = 2;
+
+ save = REG_RD(bp, BNX2_MISC_CFG);
+ REG_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC);
+
+ for (i = 0; i < (data * 2); i++) {
+ if ((i % 2) == 0) {
+ REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE);
+ }
+ else {
+ REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE |
+ BNX2_EMAC_LED_1000MB_OVERRIDE |
+ BNX2_EMAC_LED_100MB_OVERRIDE |
+ BNX2_EMAC_LED_10MB_OVERRIDE |
+ BNX2_EMAC_LED_TRAFFIC_OVERRIDE |
+ BNX2_EMAC_LED_TRAFFIC);
+ }
+ msleep_interruptible(500);
+ if (signal_pending(current))
+ break;
+ }
+ REG_WR(bp, BNX2_EMAC_LED, 0);
+ REG_WR(bp, BNX2_MISC_CFG, save);
+ return 0;
+}
+
+static struct ethtool_ops bnx2_ethtool_ops = {
+ .get_settings = bnx2_get_settings,
+ .set_settings = bnx2_set_settings,
+ .get_drvinfo = bnx2_get_drvinfo,
+ .get_wol = bnx2_get_wol,
+ .set_wol = bnx2_set_wol,
+ .nway_reset = bnx2_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = bnx2_get_eeprom_len,
+ .get_eeprom = bnx2_get_eeprom,
+ .set_eeprom = bnx2_set_eeprom,
+ .get_coalesce = bnx2_get_coalesce,
+ .set_coalesce = bnx2_set_coalesce,
+ .get_ringparam = bnx2_get_ringparam,
+ .set_ringparam = bnx2_set_ringparam,
+ .get_pauseparam = bnx2_get_pauseparam,
+ .set_pauseparam = bnx2_set_pauseparam,
+ .get_rx_csum = bnx2_get_rx_csum,
+ .set_rx_csum = bnx2_set_rx_csum,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+#ifdef BCM_TSO
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = ethtool_op_set_tso,
+#endif
+ .self_test_count = bnx2_self_test_count,
+ .self_test = bnx2_self_test,
+ .get_strings = bnx2_get_strings,
+ .phys_id = bnx2_phys_id,
+ .get_stats_count = bnx2_get_stats_count,
+ .get_ethtool_stats = bnx2_get_ethtool_stats,
+};
+
+/* Called with rtnl_lock */
+static int
+bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data;
+ struct bnx2 *bp = dev->priv;
+ int err;
+
+ switch(cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = bp->phy_addr;
+
+ /* fallthru */
+ case SIOCGMIIREG: {
+ u32 mii_regval;
+
+ spin_lock_irq(&bp->phy_lock);
+ err = bnx2_read_phy(bp, data->reg_num & 0x1f, &mii_regval);
+ spin_unlock_irq(&bp->phy_lock);
+
+ data->val_out = mii_regval;
+
+ return err;
+ }
+
+ case SIOCSMIIREG:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ spin_lock_irq(&bp->phy_lock);
+ err = bnx2_write_phy(bp, data->reg_num & 0x1f, data->val_in);
+ spin_unlock_irq(&bp->phy_lock);
+
+ return err;
+
+ default:
+ /* do nothing */
+ break;
+ }
+ return -EOPNOTSUPP;
+}
+
+/* Called with rtnl_lock */
+static int
+bnx2_change_mac_addr(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+ struct bnx2 *bp = dev->priv;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ if (netif_running(dev))
+ bnx2_set_mac_addr(bp);
+
+ return 0;
+}
+
+/* Called with rtnl_lock */
+static int
+bnx2_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct bnx2 *bp = dev->priv;
+
+ if (((new_mtu + ETH_HLEN) > MAX_ETHERNET_JUMBO_PACKET_SIZE) ||
+ ((new_mtu + ETH_HLEN) < MIN_ETHERNET_PACKET_SIZE))
+ return -EINVAL;
+
+ dev->mtu = new_mtu;
+ if (netif_running(dev)) {
+ bnx2_netif_stop(bp);
+
+ bnx2_init_nic(bp);
+
+ bnx2_netif_start(bp);
+ }
+ return 0;
+}
+
+#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
+static void
+poll_bnx2(struct net_device *dev)
+{
+ struct bnx2 *bp = dev->priv;
+
+ disable_irq(bp->pdev->irq);
+ bnx2_interrupt(bp->pdev->irq, dev, NULL);
+ enable_irq(bp->pdev->irq);
+}
+#endif
+
+static int __devinit
+bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
+{
+ struct bnx2 *bp;
+ unsigned long mem_len;
+ int rc;
+ u32 reg;
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ bp = dev->priv;
+
+ bp->flags = 0;
+ bp->phy_flags = 0;
+
+ /* enable device (incl. PCI PM wakeup), and bus-mastering */
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ printk(KERN_ERR PFX "Cannot enable PCI device, aborting.");
+ goto err_out;
+ }
+
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ printk(KERN_ERR PFX "Cannot find PCI device base address, "
+ "aborting.\n");
+ rc = -ENODEV;
+ goto err_out_disable;
+ }
+
+ rc = pci_request_regions(pdev, DRV_MODULE_NAME);
+ if (rc) {
+ printk(KERN_ERR PFX "Cannot obtain PCI resources, aborting.\n");
+ goto err_out_disable;
+ }
+
+ pci_set_master(pdev);
+
+ bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (bp->pm_cap == 0) {
+ printk(KERN_ERR PFX "Cannot find power management capability, "
+ "aborting.\n");
+ rc = -EIO;
+ goto err_out_release;
+ }
+
+ bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX);
+ if (bp->pcix_cap == 0) {
+ printk(KERN_ERR PFX "Cannot find PCIX capability, aborting.\n");
+ rc = -EIO;
+ goto err_out_release;
+ }
+
+ if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) {
+ bp->flags |= USING_DAC_FLAG;
+ if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) != 0) {
+ printk(KERN_ERR PFX "pci_set_consistent_dma_mask "
+ "failed, aborting.\n");
+ rc = -EIO;
+ goto err_out_release;
+ }
+ }
+ else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) {
+ printk(KERN_ERR PFX "System does not support DMA, aborting.\n");
+ rc = -EIO;
+ goto err_out_release;
+ }
+
+ bp->dev = dev;
+ bp->pdev = pdev;
+
+ spin_lock_init(&bp->phy_lock);
+ spin_lock_init(&bp->tx_lock);
+ INIT_WORK(&bp->reset_task, bnx2_reset_task, bp);
+
+ dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0);
+ mem_len = MB_GET_CID_ADDR(17);
+ dev->mem_end = dev->mem_start + mem_len;
+ dev->irq = pdev->irq;
+
+ bp->regview = ioremap_nocache(dev->base_addr, mem_len);
+
+ if (!bp->regview) {
+ printk(KERN_ERR PFX "Cannot map register space, aborting.\n");
+ rc = -ENOMEM;
+ goto err_out_release;
+ }
+
+ /* Configure byte swap and enable write to the reg_window registers.
+ * Rely on CPU to do target byte swapping on big endian systems
+ * The chip's target access swapping will not swap all accesses
+ */
+ pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG,
+ BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
+ BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP);
+
+ bnx2_set_power_state(bp, 0);
+
+ bp->chip_id = REG_RD(bp, BNX2_MISC_ID);
+
+ bp->phy_addr = 1;
+
+ /* Get bus information. */
+ reg = REG_RD(bp, BNX2_PCICFG_MISC_STATUS);
+ if (reg & BNX2_PCICFG_MISC_STATUS_PCIX_DET) {
+ u32 clkreg;
+
+ bp->flags |= PCIX_FLAG;
+
+ clkreg = REG_RD(bp, BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS);
+
+ clkreg &= BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET;
+ switch (clkreg) {
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ:
+ bp->bus_speed_mhz = 133;
+ break;
+
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ:
+ bp->bus_speed_mhz = 100;
+ break;
+
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ:
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ:
+ bp->bus_speed_mhz = 66;
+ break;
+
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ:
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ:
+ bp->bus_speed_mhz = 50;
+ break;
+
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW:
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ:
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ:
+ bp->bus_speed_mhz = 33;
+ break;
+ }
+ }
+ else {
+ if (reg & BNX2_PCICFG_MISC_STATUS_M66EN)
+ bp->bus_speed_mhz = 66;
+ else
+ bp->bus_speed_mhz = 33;
+ }
+
+ if (reg & BNX2_PCICFG_MISC_STATUS_32BIT_DET)
+ bp->flags |= PCI_32BIT_FLAG;
+
+ /* 5706A0 may falsely detect SERR and PERR. */
+ if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
+ reg = REG_RD(bp, PCI_COMMAND);
+ reg &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
+ REG_WR(bp, PCI_COMMAND, reg);
+ }
+ else if ((CHIP_ID(bp) == CHIP_ID_5706_A1) &&
+ !(bp->flags & PCIX_FLAG)) {
+
+ printk(KERN_ERR PFX "5706 A1 can only be used in a PCIX bus, "
+ "aborting.\n");
+ goto err_out_unmap;
+ }
+
+ bnx2_init_nvram(bp);
+
+ /* Get the permanent MAC address. First we need to make sure the
+ * firmware is actually running.
+ */
+ reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DEV_INFO_SIGNATURE);
+
+ if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) !=
+ BNX2_DEV_INFO_SIGNATURE_MAGIC) {
+ printk(KERN_ERR PFX "Firmware not running, aborting.\n");
+ rc = -ENODEV;
+ goto err_out_unmap;
+ }
+
+ bp->fw_ver = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE +
+ BNX2_DEV_INFO_BC_REV);
+
+ reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_UPPER);
+ bp->mac_addr[0] = (u8) (reg >> 8);
+ bp->mac_addr[1] = (u8) reg;
+
+ reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_LOWER);
+ bp->mac_addr[2] = (u8) (reg >> 24);
+ bp->mac_addr[3] = (u8) (reg >> 16);
+ bp->mac_addr[4] = (u8) (reg >> 8);
+ bp->mac_addr[5] = (u8) reg;
+
+ bp->tx_ring_size = MAX_TX_DESC_CNT;
+ bp->rx_ring_size = 100;
+
+ bp->rx_csum = 1;
+
+ bp->rx_offset = sizeof(struct l2_fhdr) + 2;
+
+ bp->tx_quick_cons_trip_int = 20;
+ bp->tx_quick_cons_trip = 20;
+ bp->tx_ticks_int = 80;
+ bp->tx_ticks = 80;
+
+ bp->rx_quick_cons_trip_int = 6;
+ bp->rx_quick_cons_trip = 6;
+ bp->rx_ticks_int = 18;
+ bp->rx_ticks = 18;
+
+ bp->stats_ticks = 1000000 & 0xffff00;
+
+ bp->timer_interval = HZ;
+
+ /* Disable WOL support if we are running on a SERDES chip. */
+ if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT) {
+ bp->phy_flags |= PHY_SERDES_FLAG;
+ bp->flags |= NO_WOL_FLAG;
+ }
+
+ if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
+ bp->tx_quick_cons_trip_int =
+ bp->tx_quick_cons_trip;
+ bp->tx_ticks_int = bp->tx_ticks;
+ bp->rx_quick_cons_trip_int =
+ bp->rx_quick_cons_trip;
+ bp->rx_ticks_int = bp->rx_ticks;
+ bp->comp_prod_trip_int = bp->comp_prod_trip;
+ bp->com_ticks_int = bp->com_ticks;
+ bp->cmd_ticks_int = bp->cmd_ticks;
+ }
+
+ bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL;
+ bp->req_line_speed = 0;
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg;
+ }
+ else {
+ bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg;
+ }
+
+ bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX;
+
+ return 0;
+
+err_out_unmap:
+ if (bp->regview) {
+ iounmap(bp->regview);
+ }
+
+err_out_release:
+ pci_release_regions(pdev);
+
+err_out_disable:
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+
+err_out:
+ return rc;
+}
+
+static int __devinit
+bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int version_printed = 0;
+ struct net_device *dev = NULL;
+ struct bnx2 *bp;
+ int rc, i;
+
+ if (version_printed++ == 0)
+ printk(KERN_INFO "%s", version);
+
+ /* dev zeroed in init_etherdev */
+ dev = alloc_etherdev(sizeof(*bp));
+
+ if (!dev)
+ return -ENOMEM;
+
+ rc = bnx2_init_board(pdev, dev);
+ if (rc < 0) {
+ free_netdev(dev);
+ return rc;
+ }
+
+ dev->open = bnx2_open;
+ dev->hard_start_xmit = bnx2_start_xmit;
+ dev->stop = bnx2_close;
+ dev->get_stats = bnx2_get_stats;
+ dev->set_multicast_list = bnx2_set_rx_mode;
+ dev->do_ioctl = bnx2_ioctl;
+ dev->set_mac_address = bnx2_change_mac_addr;
+ dev->change_mtu = bnx2_change_mtu;
+ dev->tx_timeout = bnx2_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+#ifdef BCM_VLAN
+ dev->vlan_rx_register = bnx2_vlan_rx_register;
+ dev->vlan_rx_kill_vid = bnx2_vlan_rx_kill_vid;
+#endif
+ dev->poll = bnx2_poll;
+ dev->ethtool_ops = &bnx2_ethtool_ops;
+ dev->weight = 64;
+
+ bp = dev->priv;
+
+#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
+ dev->poll_controller = poll_bnx2;
+#endif
+
+ if ((rc = register_netdev(dev))) {
+ printk(KERN_ERR PFX "Cannot register net device\n");
+ if (bp->regview)
+ iounmap(bp->regview);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(dev);
+ return rc;
+ }
+
+ pci_set_drvdata(pdev, dev);
+
+ memcpy(dev->dev_addr, bp->mac_addr, 6);
+ bp->name = board_info[ent->driver_data].name,
+ printk(KERN_INFO "%s: %s (%c%d) PCI%s %s %dMHz found at mem %lx, "
+ "IRQ %d, ",
+ dev->name,
+ bp->name,
+ ((CHIP_ID(bp) & 0xf000) >> 12) + 'A',
+ ((CHIP_ID(bp) & 0x0ff0) >> 4),
+ ((bp->flags & PCIX_FLAG) ? "-X" : ""),
+ ((bp->flags & PCI_32BIT_FLAG) ? "32-bit" : "64-bit"),
+ bp->bus_speed_mhz,
+ dev->base_addr,
+ bp->pdev->irq);
+
+ printk("node addr ");
+ for (i = 0; i < 6; i++)
+ printk("%2.2x", dev->dev_addr[i]);
+ printk("\n");
+
+ dev->features |= NETIF_F_SG;
+ if (bp->flags & USING_DAC_FLAG)
+ dev->features |= NETIF_F_HIGHDMA;
+ dev->features |= NETIF_F_IP_CSUM;
+#ifdef BCM_VLAN
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+#endif
+#ifdef BCM_TSO
+ dev->features |= NETIF_F_TSO;
+#endif
+
+ netif_carrier_off(bp->dev);
+
+ return 0;
+}
+
+static void __devexit
+bnx2_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct bnx2 *bp = dev->priv;
+
+ unregister_netdev(dev);
+
+ if (bp->regview)
+ iounmap(bp->regview);
+
+ free_netdev(dev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static int
+bnx2_suspend(struct pci_dev *pdev, u32 state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct bnx2 *bp = dev->priv;
+ u32 reset_code;
+
+ if (!netif_running(dev))
+ return 0;
+
+ bnx2_netif_stop(bp);
+ netif_device_detach(dev);
+ del_timer_sync(&bp->timer);
+ if (bp->wol)
+ reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL;
+ else
+ reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
+ bnx2_reset_chip(bp, reset_code);
+ bnx2_free_skbs(bp);
+ bnx2_set_power_state(bp, state);
+ return 0;
+}
+
+static int
+bnx2_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct bnx2 *bp = dev->priv;
+
+ if (!netif_running(dev))
+ return 0;
+
+ bnx2_set_power_state(bp, 0);
+ netif_device_attach(dev);
+ bnx2_init_nic(bp);
+ bnx2_netif_start(bp);
+ return 0;
+}
+
+static struct pci_driver bnx2_pci_driver = {
+ name: DRV_MODULE_NAME,
+ id_table: bnx2_pci_tbl,
+ probe: bnx2_init_one,
+ remove: __devexit_p(bnx2_remove_one),
+ suspend: bnx2_suspend,
+ resume: bnx2_resume,
+};
+
+static int __init bnx2_init(void)
+{
+ return pci_module_init(&bnx2_pci_driver);
+}
+
+static void __exit bnx2_cleanup(void)
+{
+ pci_unregister_driver(&bnx2_pci_driver);
+}
+
+module_init(bnx2_init);
+module_exit(bnx2_cleanup);
+
+
+
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
new file mode 100644
index 0000000..8214a28
--- /dev/null
+++ b/drivers/net/bnx2.h
@@ -0,0 +1,4352 @@
+/* bnx2.h: Broadcom NX2 network driver.
+ *
+ * Copyright (c) 2004, 2005 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Michael Chan (mchan@broadcom.com)
+ */
+
+
+#ifndef BNX2_H
+#define BNX2_H
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/dma-mapping.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/delay.h>
+#include <asm/byteorder.h>
+#include <linux/time.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#ifdef NETIF_F_HW_VLAN_TX
+#include <linux/if_vlan.h>
+#define BCM_VLAN 1
+#endif
+#ifdef NETIF_F_TSO
+#include <net/ip.h>
+#include <net/tcp.h>
+#include <net/checksum.h>
+#define BCM_TSO 1
+#endif
+#include <linux/workqueue.h>
+#include <linux/crc32.h>
+
+/* Hardware data structures and register definitions automatically
+ * generated from RTL code. Do not modify.
+ */
+
+/*
+ * tx_bd definition
+ */
+struct tx_bd {
+ u32 tx_bd_haddr_hi;
+ u32 tx_bd_haddr_lo;
+ u32 tx_bd_mss_nbytes;
+ u32 tx_bd_vlan_tag_flags;
+ #define TX_BD_FLAGS_CONN_FAULT (1<<0)
+ #define TX_BD_FLAGS_TCP_UDP_CKSUM (1<<1)
+ #define TX_BD_FLAGS_IP_CKSUM (1<<2)
+ #define TX_BD_FLAGS_VLAN_TAG (1<<3)
+ #define TX_BD_FLAGS_COAL_NOW (1<<4)
+ #define TX_BD_FLAGS_DONT_GEN_CRC (1<<5)
+ #define TX_BD_FLAGS_END (1<<6)
+ #define TX_BD_FLAGS_START (1<<7)
+ #define TX_BD_FLAGS_SW_OPTION_WORD (0x1f<<8)
+ #define TX_BD_FLAGS_SW_FLAGS (1<<13)
+ #define TX_BD_FLAGS_SW_SNAP (1<<14)
+ #define TX_BD_FLAGS_SW_LSO (1<<15)
+
+};
+
+
+/*
+ * rx_bd definition
+ */
+struct rx_bd {
+ u32 rx_bd_haddr_hi;
+ u32 rx_bd_haddr_lo;
+ u32 rx_bd_len;
+ u32 rx_bd_flags;
+ #define RX_BD_FLAGS_NOPUSH (1<<0)
+ #define RX_BD_FLAGS_DUMMY (1<<1)
+ #define RX_BD_FLAGS_END (1<<2)
+ #define RX_BD_FLAGS_START (1<<3)
+
+};
+
+
+/*
+ * status_block definition
+ */
+struct status_block {
+ u32 status_attn_bits;
+ #define STATUS_ATTN_BITS_LINK_STATE (1L<<0)
+ #define STATUS_ATTN_BITS_TX_SCHEDULER_ABORT (1L<<1)
+ #define STATUS_ATTN_BITS_TX_BD_READ_ABORT (1L<<2)
+ #define STATUS_ATTN_BITS_TX_BD_CACHE_ABORT (1L<<3)
+ #define STATUS_ATTN_BITS_TX_PROCESSOR_ABORT (1L<<4)
+ #define STATUS_ATTN_BITS_TX_DMA_ABORT (1L<<5)
+ #define STATUS_ATTN_BITS_TX_PATCHUP_ABORT (1L<<6)
+ #define STATUS_ATTN_BITS_TX_ASSEMBLER_ABORT (1L<<7)
+ #define STATUS_ATTN_BITS_RX_PARSER_MAC_ABORT (1L<<8)
+ #define STATUS_ATTN_BITS_RX_PARSER_CATCHUP_ABORT (1L<<9)
+ #define STATUS_ATTN_BITS_RX_MBUF_ABORT (1L<<10)
+ #define STATUS_ATTN_BITS_RX_LOOKUP_ABORT (1L<<11)
+ #define STATUS_ATTN_BITS_RX_PROCESSOR_ABORT (1L<<12)
+ #define STATUS_ATTN_BITS_RX_V2P_ABORT (1L<<13)
+ #define STATUS_ATTN_BITS_RX_BD_CACHE_ABORT (1L<<14)
+ #define STATUS_ATTN_BITS_RX_DMA_ABORT (1L<<15)
+ #define STATUS_ATTN_BITS_COMPLETION_ABORT (1L<<16)
+ #define STATUS_ATTN_BITS_HOST_COALESCE_ABORT (1L<<17)
+ #define STATUS_ATTN_BITS_MAILBOX_QUEUE_ABORT (1L<<18)
+ #define STATUS_ATTN_BITS_CONTEXT_ABORT (1L<<19)
+ #define STATUS_ATTN_BITS_CMD_SCHEDULER_ABORT (1L<<20)
+ #define STATUS_ATTN_BITS_CMD_PROCESSOR_ABORT (1L<<21)
+ #define STATUS_ATTN_BITS_MGMT_PROCESSOR_ABORT (1L<<22)
+ #define STATUS_ATTN_BITS_MAC_ABORT (1L<<23)
+ #define STATUS_ATTN_BITS_TIMER_ABORT (1L<<24)
+ #define STATUS_ATTN_BITS_DMAE_ABORT (1L<<25)
+ #define STATUS_ATTN_BITS_FLSH_ABORT (1L<<26)
+ #define STATUS_ATTN_BITS_GRC_ABORT (1L<<27)
+ #define STATUS_ATTN_BITS_PARITY_ERROR (1L<<31)
+
+ u32 status_attn_bits_ack;
+#if defined(__BIG_ENDIAN)
+ u16 status_tx_quick_consumer_index0;
+ u16 status_tx_quick_consumer_index1;
+ u16 status_tx_quick_consumer_index2;
+ u16 status_tx_quick_consumer_index3;
+ u16 status_rx_quick_consumer_index0;
+ u16 status_rx_quick_consumer_index1;
+ u16 status_rx_quick_consumer_index2;
+ u16 status_rx_quick_consumer_index3;
+ u16 status_rx_quick_consumer_index4;
+ u16 status_rx_quick_consumer_index5;
+ u16 status_rx_quick_consumer_index6;
+ u16 status_rx_quick_consumer_index7;
+ u16 status_rx_quick_consumer_index8;
+ u16 status_rx_quick_consumer_index9;
+ u16 status_rx_quick_consumer_index10;
+ u16 status_rx_quick_consumer_index11;
+ u16 status_rx_quick_consumer_index12;
+ u16 status_rx_quick_consumer_index13;
+ u16 status_rx_quick_consumer_index14;
+ u16 status_rx_quick_consumer_index15;
+ u16 status_completion_producer_index;
+ u16 status_cmd_consumer_index;
+ u16 status_idx;
+ u16 status_unused;
+#elif defined(__LITTLE_ENDIAN)
+ u16 status_tx_quick_consumer_index1;
+ u16 status_tx_quick_consumer_index0;
+ u16 status_tx_quick_consumer_index3;
+ u16 status_tx_quick_consumer_index2;
+ u16 status_rx_quick_consumer_index1;
+ u16 status_rx_quick_consumer_index0;
+ u16 status_rx_quick_consumer_index3;
+ u16 status_rx_quick_consumer_index2;
+ u16 status_rx_quick_consumer_index5;
+ u16 status_rx_quick_consumer_index4;
+ u16 status_rx_quick_consumer_index7;
+ u16 status_rx_quick_consumer_index6;
+ u16 status_rx_quick_consumer_index9;
+ u16 status_rx_quick_consumer_index8;
+ u16 status_rx_quick_consumer_index11;
+ u16 status_rx_quick_consumer_index10;
+ u16 status_rx_quick_consumer_index13;
+ u16 status_rx_quick_consumer_index12;
+ u16 status_rx_quick_consumer_index15;
+ u16 status_rx_quick_consumer_index14;
+ u16 status_cmd_consumer_index;
+ u16 status_completion_producer_index;
+ u16 status_unused;
+ u16 status_idx;
+#endif
+};
+
+
+/*
+ * statistics_block definition
+ */
+struct statistics_block {
+ u32 stat_IfHCInOctets_hi;
+ u32 stat_IfHCInOctets_lo;
+ u32 stat_IfHCInBadOctets_hi;
+ u32 stat_IfHCInBadOctets_lo;
+ u32 stat_IfHCOutOctets_hi;
+ u32 stat_IfHCOutOctets_lo;
+ u32 stat_IfHCOutBadOctets_hi;
+ u32 stat_IfHCOutBadOctets_lo;
+ u32 stat_IfHCInUcastPkts_hi;
+ u32 stat_IfHCInUcastPkts_lo;
+ u32 stat_IfHCInMulticastPkts_hi;
+ u32 stat_IfHCInMulticastPkts_lo;
+ u32 stat_IfHCInBroadcastPkts_hi;
+ u32 stat_IfHCInBroadcastPkts_lo;
+ u32 stat_IfHCOutUcastPkts_hi;
+ u32 stat_IfHCOutUcastPkts_lo;
+ u32 stat_IfHCOutMulticastPkts_hi;
+ u32 stat_IfHCOutMulticastPkts_lo;
+ u32 stat_IfHCOutBroadcastPkts_hi;
+ u32 stat_IfHCOutBroadcastPkts_lo;
+ u32 stat_emac_tx_stat_dot3statsinternalmactransmiterrors;
+ u32 stat_Dot3StatsCarrierSenseErrors;
+ u32 stat_Dot3StatsFCSErrors;
+ u32 stat_Dot3StatsAlignmentErrors;
+ u32 stat_Dot3StatsSingleCollisionFrames;
+ u32 stat_Dot3StatsMultipleCollisionFrames;
+ u32 stat_Dot3StatsDeferredTransmissions;
+ u32 stat_Dot3StatsExcessiveCollisions;
+ u32 stat_Dot3StatsLateCollisions;
+ u32 stat_EtherStatsCollisions;
+ u32 stat_EtherStatsFragments;
+ u32 stat_EtherStatsJabbers;
+ u32 stat_EtherStatsUndersizePkts;
+ u32 stat_EtherStatsOverrsizePkts;
+ u32 stat_EtherStatsPktsRx64Octets;
+ u32 stat_EtherStatsPktsRx65Octetsto127Octets;
+ u32 stat_EtherStatsPktsRx128Octetsto255Octets;
+ u32 stat_EtherStatsPktsRx256Octetsto511Octets;
+ u32 stat_EtherStatsPktsRx512Octetsto1023Octets;
+ u32 stat_EtherStatsPktsRx1024Octetsto1522Octets;
+ u32 stat_EtherStatsPktsRx1523Octetsto9022Octets;
+ u32 stat_EtherStatsPktsTx64Octets;
+ u32 stat_EtherStatsPktsTx65Octetsto127Octets;
+ u32 stat_EtherStatsPktsTx128Octetsto255Octets;
+ u32 stat_EtherStatsPktsTx256Octetsto511Octets;
+ u32 stat_EtherStatsPktsTx512Octetsto1023Octets;
+ u32 stat_EtherStatsPktsTx1024Octetsto1522Octets;
+ u32 stat_EtherStatsPktsTx1523Octetsto9022Octets;
+ u32 stat_XonPauseFramesReceived;
+ u32 stat_XoffPauseFramesReceived;
+ u32 stat_OutXonSent;
+ u32 stat_OutXoffSent;
+ u32 stat_FlowControlDone;
+ u32 stat_MacControlFramesReceived;
+ u32 stat_XoffStateEntered;
+ u32 stat_IfInFramesL2FilterDiscards;
+ u32 stat_IfInRuleCheckerDiscards;
+ u32 stat_IfInFTQDiscards;
+ u32 stat_IfInMBUFDiscards;
+ u32 stat_IfInRuleCheckerP4Hit;
+ u32 stat_CatchupInRuleCheckerDiscards;
+ u32 stat_CatchupInFTQDiscards;
+ u32 stat_CatchupInMBUFDiscards;
+ u32 stat_CatchupInRuleCheckerP4Hit;
+ u32 stat_GenStat00;
+ u32 stat_GenStat01;
+ u32 stat_GenStat02;
+ u32 stat_GenStat03;
+ u32 stat_GenStat04;
+ u32 stat_GenStat05;
+ u32 stat_GenStat06;
+ u32 stat_GenStat07;
+ u32 stat_GenStat08;
+ u32 stat_GenStat09;
+ u32 stat_GenStat10;
+ u32 stat_GenStat11;
+ u32 stat_GenStat12;
+ u32 stat_GenStat13;
+ u32 stat_GenStat14;
+ u32 stat_GenStat15;
+};
+
+
+/*
+ * l2_fhdr definition
+ */
+struct l2_fhdr {
+#if defined(__BIG_ENDIAN)
+ u16 l2_fhdr_errors;
+ u16 l2_fhdr_status;
+#elif defined(__LITTLE_ENDIAN)
+ u16 l2_fhdr_status;
+ u16 l2_fhdr_errors;
+#endif
+ #define L2_FHDR_ERRORS_BAD_CRC (1<<1)
+ #define L2_FHDR_ERRORS_PHY_DECODE (1<<2)
+ #define L2_FHDR_ERRORS_ALIGNMENT (1<<3)
+ #define L2_FHDR_ERRORS_TOO_SHORT (1<<4)
+ #define L2_FHDR_ERRORS_GIANT_FRAME (1<<5)
+
+ #define L2_FHDR_STATUS_RULE_CLASS (0x7<<0)
+ #define L2_FHDR_STATUS_RULE_P2 (1<<3)
+ #define L2_FHDR_STATUS_RULE_P3 (1<<4)
+ #define L2_FHDR_STATUS_RULE_P4 (1<<5)
+ #define L2_FHDR_STATUS_L2_VLAN_TAG (1<<6)
+ #define L2_FHDR_STATUS_L2_LLC_SNAP (1<<7)
+ #define L2_FHDR_STATUS_RSS_HASH (1<<8)
+ #define L2_FHDR_STATUS_IP_DATAGRAM (1<<13)
+ #define L2_FHDR_STATUS_TCP_SEGMENT (1<<14)
+ #define L2_FHDR_STATUS_UDP_DATAGRAM (1<<15)
+
+ u32 l2_fhdr_hash;
+#if defined(__BIG_ENDIAN)
+ u16 l2_fhdr_pkt_len;
+ u16 l2_fhdr_vlan_tag;
+ u16 l2_fhdr_ip_xsum;
+ u16 l2_fhdr_tcp_udp_xsum;
+#elif defined(__LITTLE_ENDIAN)
+ u16 l2_fhdr_vlan_tag;
+ u16 l2_fhdr_pkt_len;
+ u16 l2_fhdr_tcp_udp_xsum;
+ u16 l2_fhdr_ip_xsum;
+#endif
+};
+
+
+/*
+ * l2_context definition
+ */
+#define BNX2_L2CTX_TYPE 0x00000000
+#define BNX2_L2CTX_TYPE_SIZE_L2 ((0xc0/0x20)<<16)
+#define BNX2_L2CTX_TYPE_TYPE (0xf<<28)
+#define BNX2_L2CTX_TYPE_TYPE_EMPTY (0<<28)
+#define BNX2_L2CTX_TYPE_TYPE_L2 (1<<28)
+
+#define BNX2_L2CTX_TX_HOST_BIDX 0x00000088
+#define BNX2_L2CTX_EST_NBD 0x00000088
+#define BNX2_L2CTX_CMD_TYPE 0x00000088
+#define BNX2_L2CTX_CMD_TYPE_TYPE (0xf<<24)
+#define BNX2_L2CTX_CMD_TYPE_TYPE_L2 (0<<24)
+#define BNX2_L2CTX_CMD_TYPE_TYPE_TCP (1<<24)
+
+#define BNX2_L2CTX_TX_HOST_BSEQ 0x00000090
+#define BNX2_L2CTX_TSCH_BSEQ 0x00000094
+#define BNX2_L2CTX_TBDR_BSEQ 0x00000098
+#define BNX2_L2CTX_TBDR_BOFF 0x0000009c
+#define BNX2_L2CTX_TBDR_BIDX 0x0000009c
+#define BNX2_L2CTX_TBDR_BHADDR_HI 0x000000a0
+#define BNX2_L2CTX_TBDR_BHADDR_LO 0x000000a4
+#define BNX2_L2CTX_TXP_BOFF 0x000000a8
+#define BNX2_L2CTX_TXP_BIDX 0x000000a8
+#define BNX2_L2CTX_TXP_BSEQ 0x000000ac
+
+
+/*
+ * l2_bd_chain_context definition
+ */
+#define BNX2_L2CTX_BD_PRE_READ 0x00000000
+#define BNX2_L2CTX_CTX_SIZE 0x00000000
+#define BNX2_L2CTX_CTX_TYPE 0x00000000
+#define BNX2_L2CTX_CTX_TYPE_SIZE_L2 ((0x20/20)<<16)
+#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE (0xf<<28)
+#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_UNDEFINED (0<<28)
+#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE (1<<28)
+
+#define BNX2_L2CTX_HOST_BDIDX 0x00000004
+#define BNX2_L2CTX_HOST_BSEQ 0x00000008
+#define BNX2_L2CTX_NX_BSEQ 0x0000000c
+#define BNX2_L2CTX_NX_BDHADDR_HI 0x00000010
+#define BNX2_L2CTX_NX_BDHADDR_LO 0x00000014
+#define BNX2_L2CTX_NX_BDIDX 0x00000018
+
+
+/*
+ * pci_config_l definition
+ * offset: 0000
+ */
+#define BNX2_PCICFG_MISC_CONFIG 0x00000068
+#define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2)
+#define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3)
+#define BNX2_PCICFG_MISC_CONFIG_CLOCK_CTL_ENA (1L<<5)
+#define BNX2_PCICFG_MISC_CONFIG_TARGET_GRC_WORD_SWAP (1L<<6)
+#define BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA (1L<<7)
+#define BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ (1L<<8)
+#define BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY (1L<<9)
+#define BNX2_PCICFG_MISC_CONFIG_ASIC_METAL_REV (0xffL<<16)
+#define BNX2_PCICFG_MISC_CONFIG_ASIC_BASE_REV (0xfL<<24)
+#define BNX2_PCICFG_MISC_CONFIG_ASIC_ID (0xfL<<28)
+
+#define BNX2_PCICFG_MISC_STATUS 0x0000006c
+#define BNX2_PCICFG_MISC_STATUS_INTA_VALUE (1L<<0)
+#define BNX2_PCICFG_MISC_STATUS_32BIT_DET (1L<<1)
+#define BNX2_PCICFG_MISC_STATUS_M66EN (1L<<2)
+#define BNX2_PCICFG_MISC_STATUS_PCIX_DET (1L<<3)
+#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED (0x3L<<4)
+#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_66 (0L<<4)
+#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_100 (1L<<4)
+#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_133 (2L<<4)
+#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_PCI_MODE (3L<<4)
+
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS 0x00000070
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET (0xfL<<0)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ (0L<<0)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ (1L<<0)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ (2L<<0)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ (3L<<0)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ (4L<<0)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ (5L<<0)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ (6L<<0)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ (7L<<0)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW (0xfL<<0)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_DISABLE (1L<<6)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT (1L<<7)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC (0x7L<<8)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_UNDEF (0L<<8)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_12 (1L<<8)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_6 (2L<<8)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_62 (4L<<8)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PLAY_DEAD (1L<<11)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED (0xfL<<12)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_100 (0L<<12)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_80 (1L<<12)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_50 (2L<<12)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_40 (4L<<12)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_25 (8L<<12)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_STOP (1L<<16)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_PLL_STOP (1L<<17)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_RESERVED_18 (1L<<18)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_USE_SPD_DET (1L<<19)
+#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_RESERVED (0xfffL<<20)
+
+#define BNX2_PCICFG_REG_WINDOW_ADDRESS 0x00000078
+#define BNX2_PCICFG_REG_WINDOW 0x00000080
+#define BNX2_PCICFG_INT_ACK_CMD 0x00000084
+#define BNX2_PCICFG_INT_ACK_CMD_INDEX (0xffffL<<0)
+#define BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID (1L<<16)
+#define BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM (1L<<17)
+#define BNX2_PCICFG_INT_ACK_CMD_MASK_INT (1L<<18)
+
+#define BNX2_PCICFG_STATUS_BIT_SET_CMD 0x00000088
+#define BNX2_PCICFG_STATUS_BIT_CLEAR_CMD 0x0000008c
+#define BNX2_PCICFG_MAILBOX_QUEUE_ADDR 0x00000090
+#define BNX2_PCICFG_MAILBOX_QUEUE_DATA 0x00000094
+
+
+/*
+ * pci_reg definition
+ * offset: 0x400
+ */
+#define BNX2_PCI_GRC_WINDOW_ADDR 0x00000400
+#define BNX2_PCI_GRC_WINDOW_ADDR_PCI_GRC_WINDOW_ADDR_VALUE (0x3ffffL<<8)
+
+#define BNX2_PCI_CONFIG_1 0x00000404
+#define BNX2_PCI_CONFIG_1_READ_BOUNDARY (0x7L<<8)
+#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_OFF (0L<<8)
+#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_16 (1L<<8)
+#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_32 (2L<<8)
+#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_64 (3L<<8)
+#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_128 (4L<<8)
+#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_256 (5L<<8)
+#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_512 (6L<<8)
+#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_1024 (7L<<8)
+#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY (0x7L<<11)
+#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_OFF (0L<<11)
+#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_16 (1L<<11)
+#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_32 (2L<<11)
+#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_64 (3L<<11)
+#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_128 (4L<<11)
+#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_256 (5L<<11)
+#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_512 (6L<<11)
+#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_1024 (7L<<11)
+
+#define BNX2_PCI_CONFIG_2 0x00000408
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE (0xfL<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0)
+#define BNX2_PCI_CONFIG_2_BAR1_64ENA (1L<<4)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5)
+#define BNX2_PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6)
+#define BNX2_PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_1K (1L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_2K (2L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_4K (3L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_8K (4L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_16K (5L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_32K (6L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_64K (7L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_128K (8L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_256K (9L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_512K (10L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_1M (11L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_2M (12L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_4M (13L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_8M (14L<<8)
+#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_16M (15L<<8)
+#define BNX2_PCI_CONFIG_2_MAX_SPLIT_LIMIT (0x1fL<<16)
+#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT (0x3L<<21)
+#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_512 (0L<<21)
+#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_1K (1L<<21)
+#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_2K (2L<<21)
+#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_4K (3L<<21)
+#define BNX2_PCI_CONFIG_2_FORCE_32_BIT_MSTR (1L<<23)
+#define BNX2_PCI_CONFIG_2_FORCE_32_BIT_TGT (1L<<24)
+#define BNX2_PCI_CONFIG_2_KEEP_REQ_ASSERT (1L<<25)
+
+#define BNX2_PCI_CONFIG_3 0x0000040c
+#define BNX2_PCI_CONFIG_3_STICKY_BYTE (0xffL<<0)
+#define BNX2_PCI_CONFIG_3_FORCE_PME (1L<<24)
+#define BNX2_PCI_CONFIG_3_PME_STATUS (1L<<25)
+#define BNX2_PCI_CONFIG_3_PME_ENABLE (1L<<26)
+#define BNX2_PCI_CONFIG_3_PM_STATE (0x3L<<27)
+#define BNX2_PCI_CONFIG_3_VAUX_PRESET (1L<<30)
+#define BNX2_PCI_CONFIG_3_PCI_POWER (1L<<31)
+
+#define BNX2_PCI_PM_DATA_A 0x00000410
+#define BNX2_PCI_PM_DATA_A_PM_DATA_0_PRG (0xffL<<0)
+#define BNX2_PCI_PM_DATA_A_PM_DATA_1_PRG (0xffL<<8)
+#define BNX2_PCI_PM_DATA_A_PM_DATA_2_PRG (0xffL<<16)
+#define BNX2_PCI_PM_DATA_A_PM_DATA_3_PRG (0xffL<<24)
+
+#define BNX2_PCI_PM_DATA_B 0x00000414
+#define BNX2_PCI_PM_DATA_B_PM_DATA_4_PRG (0xffL<<0)
+#define BNX2_PCI_PM_DATA_B_PM_DATA_5_PRG (0xffL<<8)
+#define BNX2_PCI_PM_DATA_B_PM_DATA_6_PRG (0xffL<<16)
+#define BNX2_PCI_PM_DATA_B_PM_DATA_7_PRG (0xffL<<24)
+
+#define BNX2_PCI_SWAP_DIAG0 0x00000418
+#define BNX2_PCI_SWAP_DIAG1 0x0000041c
+#define BNX2_PCI_EXP_ROM_ADDR 0x00000420
+#define BNX2_PCI_EXP_ROM_ADDR_ADDRESS (0x3fffffL<<2)
+#define BNX2_PCI_EXP_ROM_ADDR_REQ (1L<<31)
+
+#define BNX2_PCI_EXP_ROM_DATA 0x00000424
+#define BNX2_PCI_VPD_INTF 0x00000428
+#define BNX2_PCI_VPD_INTF_INTF_REQ (1L<<0)
+
+#define BNX2_PCI_VPD_ADDR_FLAG 0x0000042c
+#define BNX2_PCI_VPD_ADDR_FLAG_ADDRESS (0x1fff<<2)
+#define BNX2_PCI_VPD_ADDR_FLAG_WR (1<<15)
+
+#define BNX2_PCI_VPD_DATA 0x00000430
+#define BNX2_PCI_ID_VAL1 0x00000434
+#define BNX2_PCI_ID_VAL1_DEVICE_ID (0xffffL<<0)
+#define BNX2_PCI_ID_VAL1_VENDOR_ID (0xffffL<<16)
+
+#define BNX2_PCI_ID_VAL2 0x00000438
+#define BNX2_PCI_ID_VAL2_SUBSYSTEM_VENDOR_ID (0xffffL<<0)
+#define BNX2_PCI_ID_VAL2_SUBSYSTEM_ID (0xffffL<<16)
+
+#define BNX2_PCI_ID_VAL3 0x0000043c
+#define BNX2_PCI_ID_VAL3_CLASS_CODE (0xffffffL<<0)
+#define BNX2_PCI_ID_VAL3_REVISION_ID (0xffL<<24)
+
+#define BNX2_PCI_ID_VAL4 0x00000440
+#define BNX2_PCI_ID_VAL4_CAP_ENA (0xfL<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_0 (0L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_1 (1L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_2 (2L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_3 (3L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_4 (4L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_5 (5L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_6 (6L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_7 (7L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_8 (8L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_9 (9L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_10 (10L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_11 (11L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_12 (12L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_13 (13L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_14 (14L<<0)
+#define BNX2_PCI_ID_VAL4_CAP_ENA_15 (15L<<0)
+#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG (0x3L<<6)
+#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_0 (0L<<6)
+#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_1 (1L<<6)
+#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_2 (2L<<6)
+#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_3 (3L<<6)
+#define BNX2_PCI_ID_VAL4_MSI_LIMIT (0x7L<<9)
+#define BNX2_PCI_ID_VAL4_MSI_ADVERTIZE (0x7L<<12)
+#define BNX2_PCI_ID_VAL4_MSI_ENABLE (1L<<15)
+#define BNX2_PCI_ID_VAL4_MAX_64_ADVERTIZE (1L<<16)
+#define BNX2_PCI_ID_VAL4_MAX_133_ADVERTIZE (1L<<17)
+#define BNX2_PCI_ID_VAL4_MAX_MEM_READ_SIZE (0x3L<<21)
+#define BNX2_PCI_ID_VAL4_MAX_SPLIT_SIZE (0x7L<<23)
+#define BNX2_PCI_ID_VAL4_MAX_CUMULATIVE_SIZE (0x7L<<26)
+
+#define BNX2_PCI_ID_VAL5 0x00000444
+#define BNX2_PCI_ID_VAL5_D1_SUPPORT (1L<<0)
+#define BNX2_PCI_ID_VAL5_D2_SUPPORT (1L<<1)
+#define BNX2_PCI_ID_VAL5_PME_IN_D0 (1L<<2)
+#define BNX2_PCI_ID_VAL5_PME_IN_D1 (1L<<3)
+#define BNX2_PCI_ID_VAL5_PME_IN_D2 (1L<<4)
+#define BNX2_PCI_ID_VAL5_PME_IN_D3_HOT (1L<<5)
+
+#define BNX2_PCI_PCIX_EXTENDED_STATUS 0x00000448
+#define BNX2_PCI_PCIX_EXTENDED_STATUS_NO_SNOOP (1L<<8)
+#define BNX2_PCI_PCIX_EXTENDED_STATUS_LONG_BURST (1L<<9)
+#define BNX2_PCI_PCIX_EXTENDED_STATUS_SPLIT_COMP_MSG_CLASS (0xfL<<16)
+#define BNX2_PCI_PCIX_EXTENDED_STATUS_SPLIT_COMP_MSG_IDX (0xffL<<24)
+
+#define BNX2_PCI_ID_VAL6 0x0000044c
+#define BNX2_PCI_ID_VAL6_MAX_LAT (0xffL<<0)
+#define BNX2_PCI_ID_VAL6_MIN_GNT (0xffL<<8)
+#define BNX2_PCI_ID_VAL6_BIST (0xffL<<16)
+
+#define BNX2_PCI_MSI_DATA 0x00000450
+#define BNX2_PCI_MSI_DATA_PCI_MSI_DATA (0xffffL<<0)
+
+#define BNX2_PCI_MSI_ADDR_H 0x00000454
+#define BNX2_PCI_MSI_ADDR_L 0x00000458
+
+
+/*
+ * misc_reg definition
+ * offset: 0x800
+ */
+#define BNX2_MISC_COMMAND 0x00000800
+#define BNX2_MISC_COMMAND_ENABLE_ALL (1L<<0)
+#define BNX2_MISC_COMMAND_DISABLE_ALL (1L<<1)
+#define BNX2_MISC_COMMAND_CORE_RESET (1L<<4)
+#define BNX2_MISC_COMMAND_HARD_RESET (1L<<5)
+#define BNX2_MISC_COMMAND_PAR_ERROR (1L<<8)
+#define BNX2_MISC_COMMAND_PAR_ERR_RAM (0x7fL<<16)
+
+#define BNX2_MISC_CFG 0x00000804
+#define BNX2_MISC_CFG_PCI_GRC_TMOUT (1L<<0)
+#define BNX2_MISC_CFG_NVM_WR_EN (0x3L<<1)
+#define BNX2_MISC_CFG_NVM_WR_EN_PROTECT (0L<<1)
+#define BNX2_MISC_CFG_NVM_WR_EN_PCI (1L<<1)
+#define BNX2_MISC_CFG_NVM_WR_EN_ALLOW (2L<<1)
+#define BNX2_MISC_CFG_NVM_WR_EN_ALLOW2 (3L<<1)
+#define BNX2_MISC_CFG_BIST_EN (1L<<3)
+#define BNX2_MISC_CFG_CK25_OUT_ALT_SRC (1L<<4)
+#define BNX2_MISC_CFG_BYPASS_BSCAN (1L<<5)
+#define BNX2_MISC_CFG_BYPASS_EJTAG (1L<<6)
+#define BNX2_MISC_CFG_CLK_CTL_OVERRIDE (1L<<7)
+#define BNX2_MISC_CFG_LEDMODE (0x3L<<8)
+#define BNX2_MISC_CFG_LEDMODE_MAC (0L<<8)
+#define BNX2_MISC_CFG_LEDMODE_GPHY1 (1L<<8)
+#define BNX2_MISC_CFG_LEDMODE_GPHY2 (2L<<8)
+
+#define BNX2_MISC_ID 0x00000808
+#define BNX2_MISC_ID_BOND_ID (0xfL<<0)
+#define BNX2_MISC_ID_CHIP_METAL (0xffL<<4)
+#define BNX2_MISC_ID_CHIP_REV (0xfL<<12)
+#define BNX2_MISC_ID_CHIP_NUM (0xffffL<<16)
+
+#define BNX2_MISC_ENABLE_STATUS_BITS 0x0000080c
+#define BNX2_MISC_ENABLE_STATUS_BITS_TX_SCHEDULER_ENABLE (1L<<0)
+#define BNX2_MISC_ENABLE_STATUS_BITS_TX_BD_READ_ENABLE (1L<<1)
+#define BNX2_MISC_ENABLE_STATUS_BITS_TX_BD_CACHE_ENABLE (1L<<2)
+#define BNX2_MISC_ENABLE_STATUS_BITS_TX_PROCESSOR_ENABLE (1L<<3)
+#define BNX2_MISC_ENABLE_STATUS_BITS_TX_DMA_ENABLE (1L<<4)
+#define BNX2_MISC_ENABLE_STATUS_BITS_TX_PATCHUP_ENABLE (1L<<5)
+#define BNX2_MISC_ENABLE_STATUS_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6)
+#define BNX2_MISC_ENABLE_STATUS_BITS_TX_HEADER_Q_ENABLE (1L<<7)
+#define BNX2_MISC_ENABLE_STATUS_BITS_TX_ASSEMBLER_ENABLE (1L<<8)
+#define BNX2_MISC_ENABLE_STATUS_BITS_EMAC_ENABLE (1L<<9)
+#define BNX2_MISC_ENABLE_STATUS_BITS_RX_PARSER_MAC_ENABLE (1L<<10)
+#define BNX2_MISC_ENABLE_STATUS_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11)
+#define BNX2_MISC_ENABLE_STATUS_BITS_RX_MBUF_ENABLE (1L<<12)
+#define BNX2_MISC_ENABLE_STATUS_BITS_RX_LOOKUP_ENABLE (1L<<13)
+#define BNX2_MISC_ENABLE_STATUS_BITS_RX_PROCESSOR_ENABLE (1L<<14)
+#define BNX2_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE (1L<<15)
+#define BNX2_MISC_ENABLE_STATUS_BITS_RX_BD_CACHE_ENABLE (1L<<16)
+#define BNX2_MISC_ENABLE_STATUS_BITS_RX_DMA_ENABLE (1L<<17)
+#define BNX2_MISC_ENABLE_STATUS_BITS_COMPLETION_ENABLE (1L<<18)
+#define BNX2_MISC_ENABLE_STATUS_BITS_HOST_COALESCE_ENABLE (1L<<19)
+#define BNX2_MISC_ENABLE_STATUS_BITS_MAILBOX_QUEUE_ENABLE (1L<<20)
+#define BNX2_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE (1L<<21)
+#define BNX2_MISC_ENABLE_STATUS_BITS_CMD_SCHEDULER_ENABLE (1L<<22)
+#define BNX2_MISC_ENABLE_STATUS_BITS_CMD_PROCESSOR_ENABLE (1L<<23)
+#define BNX2_MISC_ENABLE_STATUS_BITS_MGMT_PROCESSOR_ENABLE (1L<<24)
+#define BNX2_MISC_ENABLE_STATUS_BITS_TIMER_ENABLE (1L<<25)
+#define BNX2_MISC_ENABLE_STATUS_BITS_DMA_ENGINE_ENABLE (1L<<26)
+#define BNX2_MISC_ENABLE_STATUS_BITS_UMP_ENABLE (1L<<27)
+
+#define BNX2_MISC_ENABLE_SET_BITS 0x00000810
+#define BNX2_MISC_ENABLE_SET_BITS_TX_SCHEDULER_ENABLE (1L<<0)
+#define BNX2_MISC_ENABLE_SET_BITS_TX_BD_READ_ENABLE (1L<<1)
+#define BNX2_MISC_ENABLE_SET_BITS_TX_BD_CACHE_ENABLE (1L<<2)
+#define BNX2_MISC_ENABLE_SET_BITS_TX_PROCESSOR_ENABLE (1L<<3)
+#define BNX2_MISC_ENABLE_SET_BITS_TX_DMA_ENABLE (1L<<4)
+#define BNX2_MISC_ENABLE_SET_BITS_TX_PATCHUP_ENABLE (1L<<5)
+#define BNX2_MISC_ENABLE_SET_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6)
+#define BNX2_MISC_ENABLE_SET_BITS_TX_HEADER_Q_ENABLE (1L<<7)
+#define BNX2_MISC_ENABLE_SET_BITS_TX_ASSEMBLER_ENABLE (1L<<8)
+#define BNX2_MISC_ENABLE_SET_BITS_EMAC_ENABLE (1L<<9)
+#define BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_MAC_ENABLE (1L<<10)
+#define BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11)
+#define BNX2_MISC_ENABLE_SET_BITS_RX_MBUF_ENABLE (1L<<12)
+#define BNX2_MISC_ENABLE_SET_BITS_RX_LOOKUP_ENABLE (1L<<13)
+#define BNX2_MISC_ENABLE_SET_BITS_RX_PROCESSOR_ENABLE (1L<<14)
+#define BNX2_MISC_ENABLE_SET_BITS_RX_V2P_ENABLE (1L<<15)
+#define BNX2_MISC_ENABLE_SET_BITS_RX_BD_CACHE_ENABLE (1L<<16)
+#define BNX2_MISC_ENABLE_SET_BITS_RX_DMA_ENABLE (1L<<17)
+#define BNX2_MISC_ENABLE_SET_BITS_COMPLETION_ENABLE (1L<<18)
+#define BNX2_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE (1L<<19)
+#define BNX2_MISC_ENABLE_SET_BITS_MAILBOX_QUEUE_ENABLE (1L<<20)
+#define BNX2_MISC_ENABLE_SET_BITS_CONTEXT_ENABLE (1L<<21)
+#define BNX2_MISC_ENABLE_SET_BITS_CMD_SCHEDULER_ENABLE (1L<<22)
+#define BNX2_MISC_ENABLE_SET_BITS_CMD_PROCESSOR_ENABLE (1L<<23)
+#define BNX2_MISC_ENABLE_SET_BITS_MGMT_PROCESSOR_ENABLE (1L<<24)
+#define BNX2_MISC_ENABLE_SET_BITS_TIMER_ENABLE (1L<<25)
+#define BNX2_MISC_ENABLE_SET_BITS_DMA_ENGINE_ENABLE (1L<<26)
+#define BNX2_MISC_ENABLE_SET_BITS_UMP_ENABLE (1L<<27)
+
+#define BNX2_MISC_ENABLE_CLR_BITS 0x00000814
+#define BNX2_MISC_ENABLE_CLR_BITS_TX_SCHEDULER_ENABLE (1L<<0)
+#define BNX2_MISC_ENABLE_CLR_BITS_TX_BD_READ_ENABLE (1L<<1)
+#define BNX2_MISC_ENABLE_CLR_BITS_TX_BD_CACHE_ENABLE (1L<<2)
+#define BNX2_MISC_ENABLE_CLR_BITS_TX_PROCESSOR_ENABLE (1L<<3)
+#define BNX2_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE (1L<<4)
+#define BNX2_MISC_ENABLE_CLR_BITS_TX_PATCHUP_ENABLE (1L<<5)
+#define BNX2_MISC_ENABLE_CLR_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6)
+#define BNX2_MISC_ENABLE_CLR_BITS_TX_HEADER_Q_ENABLE (1L<<7)
+#define BNX2_MISC_ENABLE_CLR_BITS_TX_ASSEMBLER_ENABLE (1L<<8)
+#define BNX2_MISC_ENABLE_CLR_BITS_EMAC_ENABLE (1L<<9)
+#define BNX2_MISC_ENABLE_CLR_BITS_RX_PARSER_MAC_ENABLE (1L<<10)
+#define BNX2_MISC_ENABLE_CLR_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11)
+#define BNX2_MISC_ENABLE_CLR_BITS_RX_MBUF_ENABLE (1L<<12)
+#define BNX2_MISC_ENABLE_CLR_BITS_RX_LOOKUP_ENABLE (1L<<13)
+#define BNX2_MISC_ENABLE_CLR_BITS_RX_PROCESSOR_ENABLE (1L<<14)
+#define BNX2_MISC_ENABLE_CLR_BITS_RX_V2P_ENABLE (1L<<15)
+#define BNX2_MISC_ENABLE_CLR_BITS_RX_BD_CACHE_ENABLE (1L<<16)
+#define BNX2_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE (1L<<17)
+#define BNX2_MISC_ENABLE_CLR_BITS_COMPLETION_ENABLE (1L<<18)
+#define BNX2_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE (1L<<19)
+#define BNX2_MISC_ENABLE_CLR_BITS_MAILBOX_QUEUE_ENABLE (1L<<20)
+#define BNX2_MISC_ENABLE_CLR_BITS_CONTEXT_ENABLE (1L<<21)
+#define BNX2_MISC_ENABLE_CLR_BITS_CMD_SCHEDULER_ENABLE (1L<<22)
+#define BNX2_MISC_ENABLE_CLR_BITS_CMD_PROCESSOR_ENABLE (1L<<23)
+#define BNX2_MISC_ENABLE_CLR_BITS_MGMT_PROCESSOR_ENABLE (1L<<24)
+#define BNX2_MISC_ENABLE_CLR_BITS_TIMER_ENABLE (1L<<25)
+#define BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE (1L<<26)
+#define BNX2_MISC_ENABLE_CLR_BITS_UMP_ENABLE (1L<<27)
+
+#define BNX2_MISC_CLOCK_CONTROL_BITS 0x00000818
+#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET (0xfL<<0)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ (0L<<0)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ (1L<<0)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ (2L<<0)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ (3L<<0)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ (4L<<0)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ (5L<<0)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ (6L<<0)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ (7L<<0)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW (0xfL<<0)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_DISABLE (1L<<6)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT (1L<<7)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC (0x7L<<8)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_UNDEF (0L<<8)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_12 (1L<<8)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_6 (2L<<8)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_62 (4L<<8)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_PLAY_DEAD (1L<<11)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED (0xfL<<12)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_100 (0L<<12)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_80 (1L<<12)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_50 (2L<<12)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_40 (4L<<12)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_25 (8L<<12)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_STOP (1L<<16)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_PLL_STOP (1L<<17)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED_18 (1L<<18)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_USE_SPD_DET (1L<<19)
+#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED (0xfffL<<20)
+
+#define BNX2_MISC_GPIO 0x0000081c
+#define BNX2_MISC_GPIO_VALUE (0xffL<<0)
+#define BNX2_MISC_GPIO_SET (0xffL<<8)
+#define BNX2_MISC_GPIO_CLR (0xffL<<16)
+#define BNX2_MISC_GPIO_FLOAT (0xffL<<24)
+
+#define BNX2_MISC_GPIO_INT 0x00000820
+#define BNX2_MISC_GPIO_INT_INT_STATE (0xfL<<0)
+#define BNX2_MISC_GPIO_INT_OLD_VALUE (0xfL<<8)
+#define BNX2_MISC_GPIO_INT_OLD_SET (0xfL<<16)
+#define BNX2_MISC_GPIO_INT_OLD_CLR (0xfL<<24)
+
+#define BNX2_MISC_CONFIG_LFSR 0x00000824
+#define BNX2_MISC_CONFIG_LFSR_DIV (0xffffL<<0)
+
+#define BNX2_MISC_LFSR_MASK_BITS 0x00000828
+#define BNX2_MISC_LFSR_MASK_BITS_TX_SCHEDULER_ENABLE (1L<<0)
+#define BNX2_MISC_LFSR_MASK_BITS_TX_BD_READ_ENABLE (1L<<1)
+#define BNX2_MISC_LFSR_MASK_BITS_TX_BD_CACHE_ENABLE (1L<<2)
+#define BNX2_MISC_LFSR_MASK_BITS_TX_PROCESSOR_ENABLE (1L<<3)
+#define BNX2_MISC_LFSR_MASK_BITS_TX_DMA_ENABLE (1L<<4)
+#define BNX2_MISC_LFSR_MASK_BITS_TX_PATCHUP_ENABLE (1L<<5)
+#define BNX2_MISC_LFSR_MASK_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6)
+#define BNX2_MISC_LFSR_MASK_BITS_TX_HEADER_Q_ENABLE (1L<<7)
+#define BNX2_MISC_LFSR_MASK_BITS_TX_ASSEMBLER_ENABLE (1L<<8)
+#define BNX2_MISC_LFSR_MASK_BITS_EMAC_ENABLE (1L<<9)
+#define BNX2_MISC_LFSR_MASK_BITS_RX_PARSER_MAC_ENABLE (1L<<10)
+#define BNX2_MISC_LFSR_MASK_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11)
+#define BNX2_MISC_LFSR_MASK_BITS_RX_MBUF_ENABLE (1L<<12)
+#define BNX2_MISC_LFSR_MASK_BITS_RX_LOOKUP_ENABLE (1L<<13)
+#define BNX2_MISC_LFSR_MASK_BITS_RX_PROCESSOR_ENABLE (1L<<14)
+#define BNX2_MISC_LFSR_MASK_BITS_RX_V2P_ENABLE (1L<<15)
+#define BNX2_MISC_LFSR_MASK_BITS_RX_BD_CACHE_ENABLE (1L<<16)
+#define BNX2_MISC_LFSR_MASK_BITS_RX_DMA_ENABLE (1L<<17)
+#define BNX2_MISC_LFSR_MASK_BITS_COMPLETION_ENABLE (1L<<18)
+#define BNX2_MISC_LFSR_MASK_BITS_HOST_COALESCE_ENABLE (1L<<19)
+#define BNX2_MISC_LFSR_MASK_BITS_MAILBOX_QUEUE_ENABLE (1L<<20)
+#define BNX2_MISC_LFSR_MASK_BITS_CONTEXT_ENABLE (1L<<21)
+#define BNX2_MISC_LFSR_MASK_BITS_CMD_SCHEDULER_ENABLE (1L<<22)
+#define BNX2_MISC_LFSR_MASK_BITS_CMD_PROCESSOR_ENABLE (1L<<23)
+#define BNX2_MISC_LFSR_MASK_BITS_MGMT_PROCESSOR_ENABLE (1L<<24)
+#define BNX2_MISC_LFSR_MASK_BITS_TIMER_ENABLE (1L<<25)
+#define BNX2_MISC_LFSR_MASK_BITS_DMA_ENGINE_ENABLE (1L<<26)
+#define BNX2_MISC_LFSR_MASK_BITS_UMP_ENABLE (1L<<27)
+
+#define BNX2_MISC_ARB_REQ0 0x0000082c
+#define BNX2_MISC_ARB_REQ1 0x00000830
+#define BNX2_MISC_ARB_REQ2 0x00000834
+#define BNX2_MISC_ARB_REQ3 0x00000838
+#define BNX2_MISC_ARB_REQ4 0x0000083c
+#define BNX2_MISC_ARB_FREE0 0x00000840
+#define BNX2_MISC_ARB_FREE1 0x00000844
+#define BNX2_MISC_ARB_FREE2 0x00000848
+#define BNX2_MISC_ARB_FREE3 0x0000084c
+#define BNX2_MISC_ARB_FREE4 0x00000850
+#define BNX2_MISC_ARB_REQ_STATUS0 0x00000854
+#define BNX2_MISC_ARB_REQ_STATUS1 0x00000858
+#define BNX2_MISC_ARB_REQ_STATUS2 0x0000085c
+#define BNX2_MISC_ARB_REQ_STATUS3 0x00000860
+#define BNX2_MISC_ARB_REQ_STATUS4 0x00000864
+#define BNX2_MISC_ARB_GNT0 0x00000868
+#define BNX2_MISC_ARB_GNT0_0 (0x7L<<0)
+#define BNX2_MISC_ARB_GNT0_1 (0x7L<<4)
+#define BNX2_MISC_ARB_GNT0_2 (0x7L<<8)
+#define BNX2_MISC_ARB_GNT0_3 (0x7L<<12)
+#define BNX2_MISC_ARB_GNT0_4 (0x7L<<16)
+#define BNX2_MISC_ARB_GNT0_5 (0x7L<<20)
+#define BNX2_MISC_ARB_GNT0_6 (0x7L<<24)
+#define BNX2_MISC_ARB_GNT0_7 (0x7L<<28)
+
+#define BNX2_MISC_ARB_GNT1 0x0000086c
+#define BNX2_MISC_ARB_GNT1_8 (0x7L<<0)
+#define BNX2_MISC_ARB_GNT1_9 (0x7L<<4)
+#define BNX2_MISC_ARB_GNT1_10 (0x7L<<8)
+#define BNX2_MISC_ARB_GNT1_11 (0x7L<<12)
+#define BNX2_MISC_ARB_GNT1_12 (0x7L<<16)
+#define BNX2_MISC_ARB_GNT1_13 (0x7L<<20)
+#define BNX2_MISC_ARB_GNT1_14 (0x7L<<24)
+#define BNX2_MISC_ARB_GNT1_15 (0x7L<<28)
+
+#define BNX2_MISC_ARB_GNT2 0x00000870
+#define BNX2_MISC_ARB_GNT2_16 (0x7L<<0)
+#define BNX2_MISC_ARB_GNT2_17 (0x7L<<4)
+#define BNX2_MISC_ARB_GNT2_18 (0x7L<<8)
+#define BNX2_MISC_ARB_GNT2_19 (0x7L<<12)
+#define BNX2_MISC_ARB_GNT2_20 (0x7L<<16)
+#define BNX2_MISC_ARB_GNT2_21 (0x7L<<20)
+#define BNX2_MISC_ARB_GNT2_22 (0x7L<<24)
+#define BNX2_MISC_ARB_GNT2_23 (0x7L<<28)
+
+#define BNX2_MISC_ARB_GNT3 0x00000874
+#define BNX2_MISC_ARB_GNT3_24 (0x7L<<0)
+#define BNX2_MISC_ARB_GNT3_25 (0x7L<<4)
+#define BNX2_MISC_ARB_GNT3_26 (0x7L<<8)
+#define BNX2_MISC_ARB_GNT3_27 (0x7L<<12)
+#define BNX2_MISC_ARB_GNT3_28 (0x7L<<16)
+#define BNX2_MISC_ARB_GNT3_29 (0x7L<<20)
+#define BNX2_MISC_ARB_GNT3_30 (0x7L<<24)
+#define BNX2_MISC_ARB_GNT3_31 (0x7L<<28)
+
+#define BNX2_MISC_PRBS_CONTROL 0x00000878
+#define BNX2_MISC_PRBS_CONTROL_EN (1L<<0)
+#define BNX2_MISC_PRBS_CONTROL_RSTB (1L<<1)
+#define BNX2_MISC_PRBS_CONTROL_INV (1L<<2)
+#define BNX2_MISC_PRBS_CONTROL_ERR_CLR (1L<<3)
+#define BNX2_MISC_PRBS_CONTROL_ORDER (0x3L<<4)
+#define BNX2_MISC_PRBS_CONTROL_ORDER_7TH (0L<<4)
+#define BNX2_MISC_PRBS_CONTROL_ORDER_15TH (1L<<4)
+#define BNX2_MISC_PRBS_CONTROL_ORDER_23RD (2L<<4)
+#define BNX2_MISC_PRBS_CONTROL_ORDER_31ST (3L<<4)
+
+#define BNX2_MISC_PRBS_STATUS 0x0000087c
+#define BNX2_MISC_PRBS_STATUS_LOCK (1L<<0)
+#define BNX2_MISC_PRBS_STATUS_STKY (1L<<1)
+#define BNX2_MISC_PRBS_STATUS_ERRORS (0x3fffL<<2)
+#define BNX2_MISC_PRBS_STATUS_STATE (0xfL<<16)
+
+#define BNX2_MISC_SM_ASF_CONTROL 0x00000880
+#define BNX2_MISC_SM_ASF_CONTROL_ASF_RST (1L<<0)
+#define BNX2_MISC_SM_ASF_CONTROL_TSC_EN (1L<<1)
+#define BNX2_MISC_SM_ASF_CONTROL_WG_TO (1L<<2)
+#define BNX2_MISC_SM_ASF_CONTROL_HB_TO (1L<<3)
+#define BNX2_MISC_SM_ASF_CONTROL_PA_TO (1L<<4)
+#define BNX2_MISC_SM_ASF_CONTROL_PL_TO (1L<<5)
+#define BNX2_MISC_SM_ASF_CONTROL_RT_TO (1L<<6)
+#define BNX2_MISC_SM_ASF_CONTROL_SMB_EVENT (1L<<7)
+#define BNX2_MISC_SM_ASF_CONTROL_RES (0xfL<<8)
+#define BNX2_MISC_SM_ASF_CONTROL_SMB_EN (1L<<12)
+#define BNX2_MISC_SM_ASF_CONTROL_SMB_BB_EN (1L<<13)
+#define BNX2_MISC_SM_ASF_CONTROL_SMB_NO_ADDR_FILT (1L<<14)
+#define BNX2_MISC_SM_ASF_CONTROL_SMB_AUTOREAD (1L<<15)
+#define BNX2_MISC_SM_ASF_CONTROL_NIC_SMB_ADDR1 (0x3fL<<16)
+#define BNX2_MISC_SM_ASF_CONTROL_NIC_SMB_ADDR2 (0x3fL<<24)
+#define BNX2_MISC_SM_ASF_CONTROL_EN_NIC_SMB_ADDR_0 (1L<<30)
+#define BNX2_MISC_SM_ASF_CONTROL_SMB_EARLY_ATTN (1L<<31)
+
+#define BNX2_MISC_SMB_IN 0x00000884
+#define BNX2_MISC_SMB_IN_DAT_IN (0xffL<<0)
+#define BNX2_MISC_SMB_IN_RDY (1L<<8)
+#define BNX2_MISC_SMB_IN_DONE (1L<<9)
+#define BNX2_MISC_SMB_IN_FIRSTBYTE (1L<<10)
+#define BNX2_MISC_SMB_IN_STATUS (0x7L<<11)
+#define BNX2_MISC_SMB_IN_STATUS_OK (0x0L<<11)
+#define BNX2_MISC_SMB_IN_STATUS_PEC (0x1L<<11)
+#define BNX2_MISC_SMB_IN_STATUS_OFLOW (0x2L<<11)
+#define BNX2_MISC_SMB_IN_STATUS_STOP (0x3L<<11)
+#define BNX2_MISC_SMB_IN_STATUS_TIMEOUT (0x4L<<11)
+
+#define BNX2_MISC_SMB_OUT 0x00000888
+#define BNX2_MISC_SMB_OUT_DAT_OUT (0xffL<<0)
+#define BNX2_MISC_SMB_OUT_RDY (1L<<8)
+#define BNX2_MISC_SMB_OUT_START (1L<<9)
+#define BNX2_MISC_SMB_OUT_LAST (1L<<10)
+#define BNX2_MISC_SMB_OUT_ACC_TYPE (1L<<11)
+#define BNX2_MISC_SMB_OUT_ENB_PEC (1L<<12)
+#define BNX2_MISC_SMB_OUT_GET_RX_LEN (1L<<13)
+#define BNX2_MISC_SMB_OUT_SMB_READ_LEN (0x3fL<<14)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS (0xfL<<20)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_OK (0L<<20)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_FIRST_NACK (1L<<20)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_SUB_NACK (9L<<20)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_UFLOW (2L<<20)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_STOP (3L<<20)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_TIMEOUT (4L<<20)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_FIRST_LOST (5L<<20)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_SUB_LOST (0xdL<<20)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_BADACK (0x6L<<20)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_SLAVEMODE (1L<<24)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_DAT_EN (1L<<25)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_DAT_IN (1L<<26)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_CLK_EN (1L<<27)
+#define BNX2_MISC_SMB_OUT_SMB_OUT_CLK_IN (1L<<28)
+
+#define BNX2_MISC_SMB_WATCHDOG 0x0000088c
+#define BNX2_MISC_SMB_WATCHDOG_WATCHDOG (0xffffL<<0)
+
+#define BNX2_MISC_SMB_HEARTBEAT 0x00000890
+#define BNX2_MISC_SMB_HEARTBEAT_HEARTBEAT (0xffffL<<0)
+
+#define BNX2_MISC_SMB_POLL_ASF 0x00000894
+#define BNX2_MISC_SMB_POLL_ASF_POLL_ASF (0xffffL<<0)
+
+#define BNX2_MISC_SMB_POLL_LEGACY 0x00000898
+#define BNX2_MISC_SMB_POLL_LEGACY_POLL_LEGACY (0xffffL<<0)
+
+#define BNX2_MISC_SMB_RETRAN 0x0000089c
+#define BNX2_MISC_SMB_RETRAN_RETRAN (0xffL<<0)
+
+#define BNX2_MISC_SMB_TIMESTAMP 0x000008a0
+#define BNX2_MISC_SMB_TIMESTAMP_TIMESTAMP (0xffffffffL<<0)
+
+#define BNX2_MISC_PERR_ENA0 0x000008a4
+#define BNX2_MISC_PERR_ENA0_COM_MISC_CTXC (1L<<0)
+#define BNX2_MISC_PERR_ENA0_COM_MISC_REGF (1L<<1)
+#define BNX2_MISC_PERR_ENA0_COM_MISC_SCPAD (1L<<2)
+#define BNX2_MISC_PERR_ENA0_CP_MISC_CTXC (1L<<3)
+#define BNX2_MISC_PERR_ENA0_CP_MISC_REGF (1L<<4)
+#define BNX2_MISC_PERR_ENA0_CP_MISC_SCPAD (1L<<5)
+#define BNX2_MISC_PERR_ENA0_CS_MISC_TMEM (1L<<6)
+#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM0 (1L<<7)
+#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM1 (1L<<8)
+#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM2 (1L<<9)
+#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM3 (1L<<10)
+#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM4 (1L<<11)
+#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM5 (1L<<12)
+#define BNX2_MISC_PERR_ENA0_CTX_MISC_PGTBL (1L<<13)
+#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR0 (1L<<14)
+#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR1 (1L<<15)
+#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR2 (1L<<16)
+#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR3 (1L<<17)
+#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR4 (1L<<18)
+#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DW0 (1L<<19)
+#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DW1 (1L<<20)
+#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DW2 (1L<<21)
+#define BNX2_MISC_PERR_ENA0_HC_MISC_DMA (1L<<22)
+#define BNX2_MISC_PERR_ENA0_MCP_MISC_REGF (1L<<23)
+#define BNX2_MISC_PERR_ENA0_MCP_MISC_SCPAD (1L<<24)
+#define BNX2_MISC_PERR_ENA0_MQ_MISC_CTX (1L<<25)
+#define BNX2_MISC_PERR_ENA0_RBDC_MISC (1L<<26)
+#define BNX2_MISC_PERR_ENA0_RBUF_MISC_MB (1L<<27)
+#define BNX2_MISC_PERR_ENA0_RBUF_MISC_PTR (1L<<28)
+#define BNX2_MISC_PERR_ENA0_RDE_MISC_RPC (1L<<29)
+#define BNX2_MISC_PERR_ENA0_RDE_MISC_RPM (1L<<30)
+#define BNX2_MISC_PERR_ENA0_RV2P_MISC_CB0REGS (1L<<31)
+
+#define BNX2_MISC_PERR_ENA1 0x000008a8
+#define BNX2_MISC_PERR_ENA1_RV2P_MISC_CB1REGS (1L<<0)
+#define BNX2_MISC_PERR_ENA1_RV2P_MISC_P1IRAM (1L<<1)
+#define BNX2_MISC_PERR_ENA1_RV2P_MISC_P2IRAM (1L<<2)
+#define BNX2_MISC_PERR_ENA1_RXP_MISC_CTXC (1L<<3)
+#define BNX2_MISC_PERR_ENA1_RXP_MISC_REGF (1L<<4)
+#define BNX2_MISC_PERR_ENA1_RXP_MISC_SCPAD (1L<<5)
+#define BNX2_MISC_PERR_ENA1_RXP_MISC_RBUFC (1L<<6)
+#define BNX2_MISC_PERR_ENA1_TBDC_MISC (1L<<7)
+#define BNX2_MISC_PERR_ENA1_TDMA_MISC (1L<<8)
+#define BNX2_MISC_PERR_ENA1_THBUF_MISC_MB0 (1L<<9)
+#define BNX2_MISC_PERR_ENA1_THBUF_MISC_MB1 (1L<<10)
+#define BNX2_MISC_PERR_ENA1_TPAT_MISC_REGF (1L<<11)
+#define BNX2_MISC_PERR_ENA1_TPAT_MISC_SCPAD (1L<<12)
+#define BNX2_MISC_PERR_ENA1_TPBUF_MISC_MB (1L<<13)
+#define BNX2_MISC_PERR_ENA1_TSCH_MISC_LR (1L<<14)
+#define BNX2_MISC_PERR_ENA1_TXP_MISC_CTXC (1L<<15)
+#define BNX2_MISC_PERR_ENA1_TXP_MISC_REGF (1L<<16)
+#define BNX2_MISC_PERR_ENA1_TXP_MISC_SCPAD (1L<<17)
+#define BNX2_MISC_PERR_ENA1_UMP_MISC_FIORX (1L<<18)
+#define BNX2_MISC_PERR_ENA1_UMP_MISC_FIOTX (1L<<19)
+#define BNX2_MISC_PERR_ENA1_UMP_MISC_RX (1L<<20)
+#define BNX2_MISC_PERR_ENA1_UMP_MISC_TX (1L<<21)
+#define BNX2_MISC_PERR_ENA1_RDMAQ_MISC (1L<<22)
+#define BNX2_MISC_PERR_ENA1_CSQ_MISC (1L<<23)
+#define BNX2_MISC_PERR_ENA1_CPQ_MISC (1L<<24)
+#define BNX2_MISC_PERR_ENA1_MCPQ_MISC (1L<<25)
+#define BNX2_MISC_PERR_ENA1_RV2PMQ_MISC (1L<<26)
+#define BNX2_MISC_PERR_ENA1_RV2PPQ_MISC (1L<<27)
+#define BNX2_MISC_PERR_ENA1_RV2PTQ_MISC (1L<<28)
+#define BNX2_MISC_PERR_ENA1_RXPQ_MISC (1L<<29)
+#define BNX2_MISC_PERR_ENA1_RXPCQ_MISC (1L<<30)
+#define BNX2_MISC_PERR_ENA1_RLUPQ_MISC (1L<<31)
+
+#define BNX2_MISC_PERR_ENA2 0x000008ac
+#define BNX2_MISC_PERR_ENA2_COMQ_MISC (1L<<0)
+#define BNX2_MISC_PERR_ENA2_COMXQ_MISC (1L<<1)
+#define BNX2_MISC_PERR_ENA2_COMTQ_MISC (1L<<2)
+#define BNX2_MISC_PERR_ENA2_TSCHQ_MISC (1L<<3)
+#define BNX2_MISC_PERR_ENA2_TBDRQ_MISC (1L<<4)
+#define BNX2_MISC_PERR_ENA2_TXPQ_MISC (1L<<5)
+#define BNX2_MISC_PERR_ENA2_TDMAQ_MISC (1L<<6)
+#define BNX2_MISC_PERR_ENA2_TPATQ_MISC (1L<<7)
+#define BNX2_MISC_PERR_ENA2_TASQ_MISC (1L<<8)
+
+#define BNX2_MISC_DEBUG_VECTOR_SEL 0x000008b0
+#define BNX2_MISC_DEBUG_VECTOR_SEL_0 (0xfffL<<0)
+#define BNX2_MISC_DEBUG_VECTOR_SEL_1 (0xfffL<<12)
+
+#define BNX2_MISC_VREG_CONTROL 0x000008b4
+#define BNX2_MISC_VREG_CONTROL_1_2 (0xfL<<0)
+#define BNX2_MISC_VREG_CONTROL_2_5 (0xfL<<4)
+
+#define BNX2_MISC_FINAL_CLK_CTL_VAL 0x000008b8
+#define BNX2_MISC_FINAL_CLK_CTL_VAL_MISC_FINAL_CLK_CTL_VAL (0x3ffffffL<<6)
+
+#define BNX2_MISC_UNUSED0 0x000008bc
+
+
+/*
+ * nvm_reg definition
+ * offset: 0x6400
+ */
+#define BNX2_NVM_COMMAND 0x00006400
+#define BNX2_NVM_COMMAND_RST (1L<<0)
+#define BNX2_NVM_COMMAND_DONE (1L<<3)
+#define BNX2_NVM_COMMAND_DOIT (1L<<4)
+#define BNX2_NVM_COMMAND_WR (1L<<5)
+#define BNX2_NVM_COMMAND_ERASE (1L<<6)
+#define BNX2_NVM_COMMAND_FIRST (1L<<7)
+#define BNX2_NVM_COMMAND_LAST (1L<<8)
+#define BNX2_NVM_COMMAND_WREN (1L<<16)
+#define BNX2_NVM_COMMAND_WRDI (1L<<17)
+#define BNX2_NVM_COMMAND_EWSR (1L<<18)
+#define BNX2_NVM_COMMAND_WRSR (1L<<19)
+
+#define BNX2_NVM_STATUS 0x00006404
+#define BNX2_NVM_STATUS_PI_FSM_STATE (0xfL<<0)
+#define BNX2_NVM_STATUS_EE_FSM_STATE (0xfL<<4)
+#define BNX2_NVM_STATUS_EQ_FSM_STATE (0xfL<<8)
+
+#define BNX2_NVM_WRITE 0x00006408
+#define BNX2_NVM_WRITE_NVM_WRITE_VALUE (0xffffffffL<<0)
+#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_BIT_BANG (0L<<0)
+#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_EECLK (1L<<0)
+#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_EEDATA (2L<<0)
+#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SCLK (4L<<0)
+#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_CS_B (8L<<0)
+#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SO (16L<<0)
+#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SI (32L<<0)
+
+#define BNX2_NVM_ADDR 0x0000640c
+#define BNX2_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
+#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_BIT_BANG (0L<<0)
+#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_EECLK (1L<<0)
+#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_EEDATA (2L<<0)
+#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SCLK (4L<<0)
+#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_CS_B (8L<<0)
+#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SO (16L<<0)
+#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SI (32L<<0)
+
+#define BNX2_NVM_READ 0x00006410
+#define BNX2_NVM_READ_NVM_READ_VALUE (0xffffffffL<<0)
+#define BNX2_NVM_READ_NVM_READ_VALUE_BIT_BANG (0L<<0)
+#define BNX2_NVM_READ_NVM_READ_VALUE_EECLK (1L<<0)
+#define BNX2_NVM_READ_NVM_READ_VALUE_EEDATA (2L<<0)
+#define BNX2_NVM_READ_NVM_READ_VALUE_SCLK (4L<<0)
+#define BNX2_NVM_READ_NVM_READ_VALUE_CS_B (8L<<0)
+#define BNX2_NVM_READ_NVM_READ_VALUE_SO (16L<<0)
+#define BNX2_NVM_READ_NVM_READ_VALUE_SI (32L<<0)
+
+#define BNX2_NVM_CFG1 0x00006414
+#define BNX2_NVM_CFG1_FLASH_MODE (1L<<0)
+#define BNX2_NVM_CFG1_BUFFER_MODE (1L<<1)
+#define BNX2_NVM_CFG1_PASS_MODE (1L<<2)
+#define BNX2_NVM_CFG1_BITBANG_MODE (1L<<3)
+#define BNX2_NVM_CFG1_STATUS_BIT (0x7L<<4)
+#define BNX2_NVM_CFG1_STATUS_BIT_FLASH_RDY (0L<<4)
+#define BNX2_NVM_CFG1_STATUS_BIT_BUFFER_RDY (7L<<4)
+#define BNX2_NVM_CFG1_SPI_CLK_DIV (0xfL<<7)
+#define BNX2_NVM_CFG1_SEE_CLK_DIV (0x7ffL<<11)
+#define BNX2_NVM_CFG1_PROTECT_MODE (1L<<24)
+#define BNX2_NVM_CFG1_FLASH_SIZE (1L<<25)
+#define BNX2_NVM_CFG1_COMPAT_BYPASSS (1L<<31)
+
+#define BNX2_NVM_CFG2 0x00006418
+#define BNX2_NVM_CFG2_ERASE_CMD (0xffL<<0)
+#define BNX2_NVM_CFG2_DUMMY (0xffL<<8)
+#define BNX2_NVM_CFG2_STATUS_CMD (0xffL<<16)
+
+#define BNX2_NVM_CFG3 0x0000641c
+#define BNX2_NVM_CFG3_BUFFER_RD_CMD (0xffL<<0)
+#define BNX2_NVM_CFG3_WRITE_CMD (0xffL<<8)
+#define BNX2_NVM_CFG3_BUFFER_WRITE_CMD (0xffL<<16)
+#define BNX2_NVM_CFG3_READ_CMD (0xffL<<24)
+
+#define BNX2_NVM_SW_ARB 0x00006420
+#define BNX2_NVM_SW_ARB_ARB_REQ_SET0 (1L<<0)
+#define BNX2_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1)
+#define BNX2_NVM_SW_ARB_ARB_REQ_SET2 (1L<<2)
+#define BNX2_NVM_SW_ARB_ARB_REQ_SET3 (1L<<3)
+#define BNX2_NVM_SW_ARB_ARB_REQ_CLR0 (1L<<4)
+#define BNX2_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5)
+#define BNX2_NVM_SW_ARB_ARB_REQ_CLR2 (1L<<6)
+#define BNX2_NVM_SW_ARB_ARB_REQ_CLR3 (1L<<7)
+#define BNX2_NVM_SW_ARB_ARB_ARB0 (1L<<8)
+#define BNX2_NVM_SW_ARB_ARB_ARB1 (1L<<9)
+#define BNX2_NVM_SW_ARB_ARB_ARB2 (1L<<10)
+#define BNX2_NVM_SW_ARB_ARB_ARB3 (1L<<11)
+#define BNX2_NVM_SW_ARB_REQ0 (1L<<12)
+#define BNX2_NVM_SW_ARB_REQ1 (1L<<13)
+#define BNX2_NVM_SW_ARB_REQ2 (1L<<14)
+#define BNX2_NVM_SW_ARB_REQ3 (1L<<15)
+
+#define BNX2_NVM_ACCESS_ENABLE 0x00006424
+#define BNX2_NVM_ACCESS_ENABLE_EN (1L<<0)
+#define BNX2_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
+
+#define BNX2_NVM_WRITE1 0x00006428
+#define BNX2_NVM_WRITE1_WREN_CMD (0xffL<<0)
+#define BNX2_NVM_WRITE1_WRDI_CMD (0xffL<<8)
+#define BNX2_NVM_WRITE1_SR_DATA (0xffL<<16)
+
+
+
+/*
+ * dma_reg definition
+ * offset: 0xc00
+ */
+#define BNX2_DMA_COMMAND 0x00000c00
+#define BNX2_DMA_COMMAND_ENABLE (1L<<0)
+
+#define BNX2_DMA_STATUS 0x00000c04
+#define BNX2_DMA_STATUS_PAR_ERROR_STATE (1L<<0)
+#define BNX2_DMA_STATUS_READ_TRANSFERS_STAT (1L<<16)
+#define BNX2_DMA_STATUS_READ_DELAY_PCI_CLKS_STAT (1L<<17)
+#define BNX2_DMA_STATUS_BIG_READ_TRANSFERS_STAT (1L<<18)
+#define BNX2_DMA_STATUS_BIG_READ_DELAY_PCI_CLKS_STAT (1L<<19)
+#define BNX2_DMA_STATUS_BIG_READ_RETRY_AFTER_DATA_STAT (1L<<20)
+#define BNX2_DMA_STATUS_WRITE_TRANSFERS_STAT (1L<<21)
+#define BNX2_DMA_STATUS_WRITE_DELAY_PCI_CLKS_STAT (1L<<22)
+#define BNX2_DMA_STATUS_BIG_WRITE_TRANSFERS_STAT (1L<<23)
+#define BNX2_DMA_STATUS_BIG_WRITE_DELAY_PCI_CLKS_STAT (1L<<24)
+#define BNX2_DMA_STATUS_BIG_WRITE_RETRY_AFTER_DATA_STAT (1L<<25)
+
+#define BNX2_DMA_CONFIG 0x00000c08
+#define BNX2_DMA_CONFIG_DATA_BYTE_SWAP (1L<<0)
+#define BNX2_DMA_CONFIG_DATA_WORD_SWAP (1L<<1)
+#define BNX2_DMA_CONFIG_CNTL_BYTE_SWAP (1L<<4)
+#define BNX2_DMA_CONFIG_CNTL_WORD_SWAP (1L<<5)
+#define BNX2_DMA_CONFIG_ONE_DMA (1L<<6)
+#define BNX2_DMA_CONFIG_CNTL_TWO_DMA (1L<<7)
+#define BNX2_DMA_CONFIG_CNTL_FPGA_MODE (1L<<8)
+#define BNX2_DMA_CONFIG_CNTL_PING_PONG_DMA (1L<<10)
+#define BNX2_DMA_CONFIG_CNTL_PCI_COMP_DLY (1L<<11)
+#define BNX2_DMA_CONFIG_NO_RCHANS_IN_USE (0xfL<<12)
+#define BNX2_DMA_CONFIG_NO_WCHANS_IN_USE (0xfL<<16)
+#define BNX2_DMA_CONFIG_PCI_CLK_CMP_BITS (0x7L<<20)
+#define BNX2_DMA_CONFIG_PCI_FAST_CLK_CMP (1L<<23)
+#define BNX2_DMA_CONFIG_BIG_SIZE (0xfL<<24)
+#define BNX2_DMA_CONFIG_BIG_SIZE_NONE (0x0L<<24)
+#define BNX2_DMA_CONFIG_BIG_SIZE_64 (0x1L<<24)
+#define BNX2_DMA_CONFIG_BIG_SIZE_128 (0x2L<<24)
+#define BNX2_DMA_CONFIG_BIG_SIZE_256 (0x4L<<24)
+#define BNX2_DMA_CONFIG_BIG_SIZE_512 (0x8L<<24)
+
+#define BNX2_DMA_BLACKOUT 0x00000c0c
+#define BNX2_DMA_BLACKOUT_RD_RETRY_BLACKOUT (0xffL<<0)
+#define BNX2_DMA_BLACKOUT_2ND_RD_RETRY_BLACKOUT (0xffL<<8)
+#define BNX2_DMA_BLACKOUT_WR_RETRY_BLACKOUT (0xffL<<16)
+
+#define BNX2_DMA_RCHAN_STAT 0x00000c30
+#define BNX2_DMA_RCHAN_STAT_COMP_CODE_0 (0x7L<<0)
+#define BNX2_DMA_RCHAN_STAT_PAR_ERR_0 (1L<<3)
+#define BNX2_DMA_RCHAN_STAT_COMP_CODE_1 (0x7L<<4)
+#define BNX2_DMA_RCHAN_STAT_PAR_ERR_1 (1L<<7)
+#define BNX2_DMA_RCHAN_STAT_COMP_CODE_2 (0x7L<<8)
+#define BNX2_DMA_RCHAN_STAT_PAR_ERR_2 (1L<<11)
+#define BNX2_DMA_RCHAN_STAT_COMP_CODE_3 (0x7L<<12)
+#define BNX2_DMA_RCHAN_STAT_PAR_ERR_3 (1L<<15)
+#define BNX2_DMA_RCHAN_STAT_COMP_CODE_4 (0x7L<<16)
+#define BNX2_DMA_RCHAN_STAT_PAR_ERR_4 (1L<<19)
+#define BNX2_DMA_RCHAN_STAT_COMP_CODE_5 (0x7L<<20)
+#define BNX2_DMA_RCHAN_STAT_PAR_ERR_5 (1L<<23)
+#define BNX2_DMA_RCHAN_STAT_COMP_CODE_6 (0x7L<<24)
+#define BNX2_DMA_RCHAN_STAT_PAR_ERR_6 (1L<<27)
+#define BNX2_DMA_RCHAN_STAT_COMP_CODE_7 (0x7L<<28)
+#define BNX2_DMA_RCHAN_STAT_PAR_ERR_7 (1L<<31)
+
+#define BNX2_DMA_WCHAN_STAT 0x00000c34
+#define BNX2_DMA_WCHAN_STAT_COMP_CODE_0 (0x7L<<0)
+#define BNX2_DMA_WCHAN_STAT_PAR_ERR_0 (1L<<3)
+#define BNX2_DMA_WCHAN_STAT_COMP_CODE_1 (0x7L<<4)
+#define BNX2_DMA_WCHAN_STAT_PAR_ERR_1 (1L<<7)
+#define BNX2_DMA_WCHAN_STAT_COMP_CODE_2 (0x7L<<8)
+#define BNX2_DMA_WCHAN_STAT_PAR_ERR_2 (1L<<11)
+#define BNX2_DMA_WCHAN_STAT_COMP_CODE_3 (0x7L<<12)
+#define BNX2_DMA_WCHAN_STAT_PAR_ERR_3 (1L<<15)
+#define BNX2_DMA_WCHAN_STAT_COMP_CODE_4 (0x7L<<16)
+#define BNX2_DMA_WCHAN_STAT_PAR_ERR_4 (1L<<19)
+#define BNX2_DMA_WCHAN_STAT_COMP_CODE_5 (0x7L<<20)
+#define BNX2_DMA_WCHAN_STAT_PAR_ERR_5 (1L<<23)
+#define BNX2_DMA_WCHAN_STAT_COMP_CODE_6 (0x7L<<24)
+#define BNX2_DMA_WCHAN_STAT_PAR_ERR_6 (1L<<27)
+#define BNX2_DMA_WCHAN_STAT_COMP_CODE_7 (0x7L<<28)
+#define BNX2_DMA_WCHAN_STAT_PAR_ERR_7 (1L<<31)
+
+#define BNX2_DMA_RCHAN_ASSIGNMENT 0x00000c38
+#define BNX2_DMA_RCHAN_ASSIGNMENT_0 (0xfL<<0)
+#define BNX2_DMA_RCHAN_ASSIGNMENT_1 (0xfL<<4)
+#define BNX2_DMA_RCHAN_ASSIGNMENT_2 (0xfL<<8)
+#define BNX2_DMA_RCHAN_ASSIGNMENT_3 (0xfL<<12)
+#define BNX2_DMA_RCHAN_ASSIGNMENT_4 (0xfL<<16)
+#define BNX2_DMA_RCHAN_ASSIGNMENT_5 (0xfL<<20)
+#define BNX2_DMA_RCHAN_ASSIGNMENT_6 (0xfL<<24)
+#define BNX2_DMA_RCHAN_ASSIGNMENT_7 (0xfL<<28)
+
+#define BNX2_DMA_WCHAN_ASSIGNMENT 0x00000c3c
+#define BNX2_DMA_WCHAN_ASSIGNMENT_0 (0xfL<<0)
+#define BNX2_DMA_WCHAN_ASSIGNMENT_1 (0xfL<<4)
+#define BNX2_DMA_WCHAN_ASSIGNMENT_2 (0xfL<<8)
+#define BNX2_DMA_WCHAN_ASSIGNMENT_3 (0xfL<<12)
+#define BNX2_DMA_WCHAN_ASSIGNMENT_4 (0xfL<<16)
+#define BNX2_DMA_WCHAN_ASSIGNMENT_5 (0xfL<<20)
+#define BNX2_DMA_WCHAN_ASSIGNMENT_6 (0xfL<<24)
+#define BNX2_DMA_WCHAN_ASSIGNMENT_7 (0xfL<<28)
+
+#define BNX2_DMA_RCHAN_STAT_00 0x00000c40
+#define BNX2_DMA_RCHAN_STAT_00_RCHAN_STA_HOST_ADDR_LOW (0xffffffffL<<0)
+
+#define BNX2_DMA_RCHAN_STAT_01 0x00000c44
+#define BNX2_DMA_RCHAN_STAT_01_RCHAN_STA_HOST_ADDR_HIGH (0xffffffffL<<0)
+
+#define BNX2_DMA_RCHAN_STAT_02 0x00000c48
+#define BNX2_DMA_RCHAN_STAT_02_LENGTH (0xffffL<<0)
+#define BNX2_DMA_RCHAN_STAT_02_WORD_SWAP (1L<<16)
+#define BNX2_DMA_RCHAN_STAT_02_BYTE_SWAP (1L<<17)
+#define BNX2_DMA_RCHAN_STAT_02_PRIORITY_LVL (1L<<18)
+
+#define BNX2_DMA_RCHAN_STAT_10 0x00000c4c
+#define BNX2_DMA_RCHAN_STAT_11 0x00000c50
+#define BNX2_DMA_RCHAN_STAT_12 0x00000c54
+#define BNX2_DMA_RCHAN_STAT_20 0x00000c58
+#define BNX2_DMA_RCHAN_STAT_21 0x00000c5c
+#define BNX2_DMA_RCHAN_STAT_22 0x00000c60
+#define BNX2_DMA_RCHAN_STAT_30 0x00000c64
+#define BNX2_DMA_RCHAN_STAT_31 0x00000c68
+#define BNX2_DMA_RCHAN_STAT_32 0x00000c6c
+#define BNX2_DMA_RCHAN_STAT_40 0x00000c70
+#define BNX2_DMA_RCHAN_STAT_41 0x00000c74
+#define BNX2_DMA_RCHAN_STAT_42 0x00000c78
+#define BNX2_DMA_RCHAN_STAT_50 0x00000c7c
+#define BNX2_DMA_RCHAN_STAT_51 0x00000c80
+#define BNX2_DMA_RCHAN_STAT_52 0x00000c84
+#define BNX2_DMA_RCHAN_STAT_60 0x00000c88
+#define BNX2_DMA_RCHAN_STAT_61 0x00000c8c
+#define BNX2_DMA_RCHAN_STAT_62 0x00000c90
+#define BNX2_DMA_RCHAN_STAT_70 0x00000c94
+#define BNX2_DMA_RCHAN_STAT_71 0x00000c98
+#define BNX2_DMA_RCHAN_STAT_72 0x00000c9c
+#define BNX2_DMA_WCHAN_STAT_00 0x00000ca0
+#define BNX2_DMA_WCHAN_STAT_00_WCHAN_STA_HOST_ADDR_LOW (0xffffffffL<<0)
+
+#define BNX2_DMA_WCHAN_STAT_01 0x00000ca4
+#define BNX2_DMA_WCHAN_STAT_01_WCHAN_STA_HOST_ADDR_HIGH (0xffffffffL<<0)
+
+#define BNX2_DMA_WCHAN_STAT_02 0x00000ca8
+#define BNX2_DMA_WCHAN_STAT_02_LENGTH (0xffffL<<0)
+#define BNX2_DMA_WCHAN_STAT_02_WORD_SWAP (1L<<16)
+#define BNX2_DMA_WCHAN_STAT_02_BYTE_SWAP (1L<<17)
+#define BNX2_DMA_WCHAN_STAT_02_PRIORITY_LVL (1L<<18)
+
+#define BNX2_DMA_WCHAN_STAT_10 0x00000cac
+#define BNX2_DMA_WCHAN_STAT_11 0x00000cb0
+#define BNX2_DMA_WCHAN_STAT_12 0x00000cb4
+#define BNX2_DMA_WCHAN_STAT_20 0x00000cb8
+#define BNX2_DMA_WCHAN_STAT_21 0x00000cbc
+#define BNX2_DMA_WCHAN_STAT_22 0x00000cc0
+#define BNX2_DMA_WCHAN_STAT_30 0x00000cc4
+#define BNX2_DMA_WCHAN_STAT_31 0x00000cc8
+#define BNX2_DMA_WCHAN_STAT_32 0x00000ccc
+#define BNX2_DMA_WCHAN_STAT_40 0x00000cd0
+#define BNX2_DMA_WCHAN_STAT_41 0x00000cd4
+#define BNX2_DMA_WCHAN_STAT_42 0x00000cd8
+#define BNX2_DMA_WCHAN_STAT_50 0x00000cdc
+#define BNX2_DMA_WCHAN_STAT_51 0x00000ce0
+#define BNX2_DMA_WCHAN_STAT_52 0x00000ce4
+#define BNX2_DMA_WCHAN_STAT_60 0x00000ce8
+#define BNX2_DMA_WCHAN_STAT_61 0x00000cec
+#define BNX2_DMA_WCHAN_STAT_62 0x00000cf0
+#define BNX2_DMA_WCHAN_STAT_70 0x00000cf4
+#define BNX2_DMA_WCHAN_STAT_71 0x00000cf8
+#define BNX2_DMA_WCHAN_STAT_72 0x00000cfc
+#define BNX2_DMA_ARB_STAT_00 0x00000d00
+#define BNX2_DMA_ARB_STAT_00_MASTER (0xffffL<<0)
+#define BNX2_DMA_ARB_STAT_00_MASTER_ENC (0xffL<<16)
+#define BNX2_DMA_ARB_STAT_00_CUR_BINMSTR (0xffL<<24)
+
+#define BNX2_DMA_ARB_STAT_01 0x00000d04
+#define BNX2_DMA_ARB_STAT_01_LPR_RPTR (0xfL<<0)
+#define BNX2_DMA_ARB_STAT_01_LPR_WPTR (0xfL<<4)
+#define BNX2_DMA_ARB_STAT_01_LPB_RPTR (0xfL<<8)
+#define BNX2_DMA_ARB_STAT_01_LPB_WPTR (0xfL<<12)
+#define BNX2_DMA_ARB_STAT_01_HPR_RPTR (0xfL<<16)
+#define BNX2_DMA_ARB_STAT_01_HPR_WPTR (0xfL<<20)
+#define BNX2_DMA_ARB_STAT_01_HPB_RPTR (0xfL<<24)
+#define BNX2_DMA_ARB_STAT_01_HPB_WPTR (0xfL<<28)
+
+#define BNX2_DMA_FUSE_CTRL0_CMD 0x00000f00
+#define BNX2_DMA_FUSE_CTRL0_CMD_PWRUP_DONE (1L<<0)
+#define BNX2_DMA_FUSE_CTRL0_CMD_SHIFT_DONE (1L<<1)
+#define BNX2_DMA_FUSE_CTRL0_CMD_SHIFT (1L<<2)
+#define BNX2_DMA_FUSE_CTRL0_CMD_LOAD (1L<<3)
+#define BNX2_DMA_FUSE_CTRL0_CMD_SEL (0xfL<<8)
+
+#define BNX2_DMA_FUSE_CTRL0_DATA 0x00000f04
+#define BNX2_DMA_FUSE_CTRL1_CMD 0x00000f08
+#define BNX2_DMA_FUSE_CTRL1_CMD_PWRUP_DONE (1L<<0)
+#define BNX2_DMA_FUSE_CTRL1_CMD_SHIFT_DONE (1L<<1)
+#define BNX2_DMA_FUSE_CTRL1_CMD_SHIFT (1L<<2)
+#define BNX2_DMA_FUSE_CTRL1_CMD_LOAD (1L<<3)
+#define BNX2_DMA_FUSE_CTRL1_CMD_SEL (0xfL<<8)
+
+#define BNX2_DMA_FUSE_CTRL1_DATA 0x00000f0c
+#define BNX2_DMA_FUSE_CTRL2_CMD 0x00000f10
+#define BNX2_DMA_FUSE_CTRL2_CMD_PWRUP_DONE (1L<<0)
+#define BNX2_DMA_FUSE_CTRL2_CMD_SHIFT_DONE (1L<<1)
+#define BNX2_DMA_FUSE_CTRL2_CMD_SHIFT (1L<<2)
+#define BNX2_DMA_FUSE_CTRL2_CMD_LOAD (1L<<3)
+#define BNX2_DMA_FUSE_CTRL2_CMD_SEL (0xfL<<8)
+
+#define BNX2_DMA_FUSE_CTRL2_DATA 0x00000f14
+
+
+/*
+ * context_reg definition
+ * offset: 0x1000
+ */
+#define BNX2_CTX_COMMAND 0x00001000
+#define BNX2_CTX_COMMAND_ENABLED (1L<<0)
+
+#define BNX2_CTX_STATUS 0x00001004
+#define BNX2_CTX_STATUS_LOCK_WAIT (1L<<0)
+#define BNX2_CTX_STATUS_READ_STAT (1L<<16)
+#define BNX2_CTX_STATUS_WRITE_STAT (1L<<17)
+#define BNX2_CTX_STATUS_ACC_STALL_STAT (1L<<18)
+#define BNX2_CTX_STATUS_LOCK_STALL_STAT (1L<<19)
+
+#define BNX2_CTX_VIRT_ADDR 0x00001008
+#define BNX2_CTX_VIRT_ADDR_VIRT_ADDR (0x7fffL<<6)
+
+#define BNX2_CTX_PAGE_TBL 0x0000100c
+#define BNX2_CTX_PAGE_TBL_PAGE_TBL (0x3fffL<<6)
+
+#define BNX2_CTX_DATA_ADR 0x00001010
+#define BNX2_CTX_DATA_ADR_DATA_ADR (0x7ffffL<<2)
+
+#define BNX2_CTX_DATA 0x00001014
+#define BNX2_CTX_LOCK 0x00001018
+#define BNX2_CTX_LOCK_TYPE (0x7L<<0)
+#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_VOID (0x0L<<0)
+#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_COMPLETE (0x7L<<0)
+#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_PROTOCOL (0x1L<<0)
+#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_TX (0x2L<<0)
+#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_TIMER (0x4L<<0)
+#define BNX2_CTX_LOCK_CID_VALUE (0x3fffL<<7)
+#define BNX2_CTX_LOCK_GRANTED (1L<<26)
+#define BNX2_CTX_LOCK_MODE (0x7L<<27)
+#define BNX2_CTX_LOCK_MODE_UNLOCK (0x0L<<27)
+#define BNX2_CTX_LOCK_MODE_IMMEDIATE (0x1L<<27)
+#define BNX2_CTX_LOCK_MODE_SURE (0x2L<<27)
+#define BNX2_CTX_LOCK_STATUS (1L<<30)
+#define BNX2_CTX_LOCK_REQ (1L<<31)
+
+#define BNX2_CTX_ACCESS_STATUS 0x00001040
+#define BNX2_CTX_ACCESS_STATUS_MASTERENCODED (0xfL<<0)
+#define BNX2_CTX_ACCESS_STATUS_ACCESSMEMORYSM (0x3L<<10)
+#define BNX2_CTX_ACCESS_STATUS_PAGETABLEINITSM (0x3L<<12)
+#define BNX2_CTX_ACCESS_STATUS_ACCESSMEMORYINITSM (0x3L<<14)
+#define BNX2_CTX_ACCESS_STATUS_QUALIFIED_REQUEST (0x7ffL<<17)
+
+#define BNX2_CTX_DBG_LOCK_STATUS 0x00001044
+#define BNX2_CTX_DBG_LOCK_STATUS_SM (0x3ffL<<0)
+#define BNX2_CTX_DBG_LOCK_STATUS_MATCH (0x3ffL<<22)
+
+#define BNX2_CTX_CHNL_LOCK_STATUS_0 0x00001080
+#define BNX2_CTX_CHNL_LOCK_STATUS_0_CID (0x3fffL<<0)
+#define BNX2_CTX_CHNL_LOCK_STATUS_0_TYPE (0x3L<<14)
+#define BNX2_CTX_CHNL_LOCK_STATUS_0_MODE (1L<<16)
+
+#define BNX2_CTX_CHNL_LOCK_STATUS_1 0x00001084
+#define BNX2_CTX_CHNL_LOCK_STATUS_2 0x00001088
+#define BNX2_CTX_CHNL_LOCK_STATUS_3 0x0000108c
+#define BNX2_CTX_CHNL_LOCK_STATUS_4 0x00001090
+#define BNX2_CTX_CHNL_LOCK_STATUS_5 0x00001094
+#define BNX2_CTX_CHNL_LOCK_STATUS_6 0x00001098
+#define BNX2_CTX_CHNL_LOCK_STATUS_7 0x0000109c
+#define BNX2_CTX_CHNL_LOCK_STATUS_8 0x000010a0
+
+
+/*
+ * emac_reg definition
+ * offset: 0x1400
+ */
+#define BNX2_EMAC_MODE 0x00001400
+#define BNX2_EMAC_MODE_RESET (1L<<0)
+#define BNX2_EMAC_MODE_HALF_DUPLEX (1L<<1)
+#define BNX2_EMAC_MODE_PORT (0x3L<<2)
+#define BNX2_EMAC_MODE_PORT_NONE (0L<<2)
+#define BNX2_EMAC_MODE_PORT_MII (1L<<2)
+#define BNX2_EMAC_MODE_PORT_GMII (2L<<2)
+#define BNX2_EMAC_MODE_PORT_UNDEF (3L<<2)
+#define BNX2_EMAC_MODE_MAC_LOOP (1L<<4)
+#define BNX2_EMAC_MODE_TAGGED_MAC_CTL (1L<<7)
+#define BNX2_EMAC_MODE_TX_BURST (1L<<8)
+#define BNX2_EMAC_MODE_MAX_DEFER_DROP_ENA (1L<<9)
+#define BNX2_EMAC_MODE_EXT_LINK_POL (1L<<10)
+#define BNX2_EMAC_MODE_FORCE_LINK (1L<<11)
+#define BNX2_EMAC_MODE_MPKT (1L<<18)
+#define BNX2_EMAC_MODE_MPKT_RCVD (1L<<19)
+#define BNX2_EMAC_MODE_ACPI_RCVD (1L<<20)
+
+#define BNX2_EMAC_STATUS 0x00001404
+#define BNX2_EMAC_STATUS_LINK (1L<<11)
+#define BNX2_EMAC_STATUS_LINK_CHANGE (1L<<12)
+#define BNX2_EMAC_STATUS_MI_COMPLETE (1L<<22)
+#define BNX2_EMAC_STATUS_MI_INT (1L<<23)
+#define BNX2_EMAC_STATUS_AP_ERROR (1L<<24)
+#define BNX2_EMAC_STATUS_PARITY_ERROR_STATE (1L<<31)
+
+#define BNX2_EMAC_ATTENTION_ENA 0x00001408
+#define BNX2_EMAC_ATTENTION_ENA_LINK (1L<<11)
+#define BNX2_EMAC_ATTENTION_ENA_MI_COMPLETE (1L<<22)
+#define BNX2_EMAC_ATTENTION_ENA_MI_INT (1L<<23)
+#define BNX2_EMAC_ATTENTION_ENA_AP_ERROR (1L<<24)
+
+#define BNX2_EMAC_LED 0x0000140c
+#define BNX2_EMAC_LED_OVERRIDE (1L<<0)
+#define BNX2_EMAC_LED_1000MB_OVERRIDE (1L<<1)
+#define BNX2_EMAC_LED_100MB_OVERRIDE (1L<<2)
+#define BNX2_EMAC_LED_10MB_OVERRIDE (1L<<3)
+#define BNX2_EMAC_LED_TRAFFIC_OVERRIDE (1L<<4)
+#define BNX2_EMAC_LED_BLNK_TRAFFIC (1L<<5)
+#define BNX2_EMAC_LED_TRAFFIC (1L<<6)
+#define BNX2_EMAC_LED_1000MB (1L<<7)
+#define BNX2_EMAC_LED_100MB (1L<<8)
+#define BNX2_EMAC_LED_10MB (1L<<9)
+#define BNX2_EMAC_LED_TRAFFIC_STAT (1L<<10)
+#define BNX2_EMAC_LED_BLNK_RATE (0xfffL<<19)
+#define BNX2_EMAC_LED_BLNK_RATE_ENA (1L<<31)
+
+#define BNX2_EMAC_MAC_MATCH0 0x00001410
+#define BNX2_EMAC_MAC_MATCH1 0x00001414
+#define BNX2_EMAC_MAC_MATCH2 0x00001418
+#define BNX2_EMAC_MAC_MATCH3 0x0000141c
+#define BNX2_EMAC_MAC_MATCH4 0x00001420
+#define BNX2_EMAC_MAC_MATCH5 0x00001424
+#define BNX2_EMAC_MAC_MATCH6 0x00001428
+#define BNX2_EMAC_MAC_MATCH7 0x0000142c
+#define BNX2_EMAC_MAC_MATCH8 0x00001430
+#define BNX2_EMAC_MAC_MATCH9 0x00001434
+#define BNX2_EMAC_MAC_MATCH10 0x00001438
+#define BNX2_EMAC_MAC_MATCH11 0x0000143c
+#define BNX2_EMAC_MAC_MATCH12 0x00001440
+#define BNX2_EMAC_MAC_MATCH13 0x00001444
+#define BNX2_EMAC_MAC_MATCH14 0x00001448
+#define BNX2_EMAC_MAC_MATCH15 0x0000144c
+#define BNX2_EMAC_MAC_MATCH16 0x00001450
+#define BNX2_EMAC_MAC_MATCH17 0x00001454
+#define BNX2_EMAC_MAC_MATCH18 0x00001458
+#define BNX2_EMAC_MAC_MATCH19 0x0000145c
+#define BNX2_EMAC_MAC_MATCH20 0x00001460
+#define BNX2_EMAC_MAC_MATCH21 0x00001464
+#define BNX2_EMAC_MAC_MATCH22 0x00001468
+#define BNX2_EMAC_MAC_MATCH23 0x0000146c
+#define BNX2_EMAC_MAC_MATCH24 0x00001470
+#define BNX2_EMAC_MAC_MATCH25 0x00001474
+#define BNX2_EMAC_MAC_MATCH26 0x00001478
+#define BNX2_EMAC_MAC_MATCH27 0x0000147c
+#define BNX2_EMAC_MAC_MATCH28 0x00001480
+#define BNX2_EMAC_MAC_MATCH29 0x00001484
+#define BNX2_EMAC_MAC_MATCH30 0x00001488
+#define BNX2_EMAC_MAC_MATCH31 0x0000148c
+#define BNX2_EMAC_BACKOFF_SEED 0x00001498
+#define BNX2_EMAC_BACKOFF_SEED_EMAC_BACKOFF_SEED (0x3ffL<<0)
+
+#define BNX2_EMAC_RX_MTU_SIZE 0x0000149c
+#define BNX2_EMAC_RX_MTU_SIZE_MTU_SIZE (0xffffL<<0)
+#define BNX2_EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31)
+
+#define BNX2_EMAC_SERDES_CNTL 0x000014a4
+#define BNX2_EMAC_SERDES_CNTL_RXR (0x7L<<0)
+#define BNX2_EMAC_SERDES_CNTL_RXG (0x3L<<3)
+#define BNX2_EMAC_SERDES_CNTL_RXCKSEL (1L<<6)
+#define BNX2_EMAC_SERDES_CNTL_TXBIAS (0x7L<<7)
+#define BNX2_EMAC_SERDES_CNTL_BGMAX (1L<<10)
+#define BNX2_EMAC_SERDES_CNTL_BGMIN (1L<<11)
+#define BNX2_EMAC_SERDES_CNTL_TXMODE (1L<<12)
+#define BNX2_EMAC_SERDES_CNTL_TXEDGE (1L<<13)
+#define BNX2_EMAC_SERDES_CNTL_SERDES_MODE (1L<<14)
+#define BNX2_EMAC_SERDES_CNTL_PLLTEST (1L<<15)
+#define BNX2_EMAC_SERDES_CNTL_CDET_EN (1L<<16)
+#define BNX2_EMAC_SERDES_CNTL_TBI_LBK (1L<<17)
+#define BNX2_EMAC_SERDES_CNTL_REMOTE_LBK (1L<<18)
+#define BNX2_EMAC_SERDES_CNTL_REV_PHASE (1L<<19)
+#define BNX2_EMAC_SERDES_CNTL_REGCTL12 (0x3L<<20)
+#define BNX2_EMAC_SERDES_CNTL_REGCTL25 (0x3L<<22)
+
+#define BNX2_EMAC_SERDES_STATUS 0x000014a8
+#define BNX2_EMAC_SERDES_STATUS_RX_STAT (0xffL<<0)
+#define BNX2_EMAC_SERDES_STATUS_COMMA_DET (1L<<8)
+
+#define BNX2_EMAC_MDIO_COMM 0x000014ac
+#define BNX2_EMAC_MDIO_COMM_DATA (0xffffL<<0)
+#define BNX2_EMAC_MDIO_COMM_REG_ADDR (0x1fL<<16)
+#define BNX2_EMAC_MDIO_COMM_PHY_ADDR (0x1fL<<21)
+#define BNX2_EMAC_MDIO_COMM_COMMAND (0x3L<<26)
+#define BNX2_EMAC_MDIO_COMM_COMMAND_UNDEFINED_0 (0L<<26)
+#define BNX2_EMAC_MDIO_COMM_COMMAND_WRITE (1L<<26)
+#define BNX2_EMAC_MDIO_COMM_COMMAND_READ (2L<<26)
+#define BNX2_EMAC_MDIO_COMM_COMMAND_UNDEFINED_3 (3L<<26)
+#define BNX2_EMAC_MDIO_COMM_FAIL (1L<<28)
+#define BNX2_EMAC_MDIO_COMM_START_BUSY (1L<<29)
+#define BNX2_EMAC_MDIO_COMM_DISEXT (1L<<30)
+
+#define BNX2_EMAC_MDIO_STATUS 0x000014b0
+#define BNX2_EMAC_MDIO_STATUS_LINK (1L<<0)
+#define BNX2_EMAC_MDIO_STATUS_10MB (1L<<1)
+
+#define BNX2_EMAC_MDIO_MODE 0x000014b4
+#define BNX2_EMAC_MDIO_MODE_SHORT_PREAMBLE (1L<<1)
+#define BNX2_EMAC_MDIO_MODE_AUTO_POLL (1L<<4)
+#define BNX2_EMAC_MDIO_MODE_BIT_BANG (1L<<8)
+#define BNX2_EMAC_MDIO_MODE_MDIO (1L<<9)
+#define BNX2_EMAC_MDIO_MODE_MDIO_OE (1L<<10)
+#define BNX2_EMAC_MDIO_MODE_MDC (1L<<11)
+#define BNX2_EMAC_MDIO_MODE_MDINT (1L<<12)
+#define BNX2_EMAC_MDIO_MODE_CLOCK_CNT (0x1fL<<16)
+
+#define BNX2_EMAC_MDIO_AUTO_STATUS 0x000014b8
+#define BNX2_EMAC_MDIO_AUTO_STATUS_AUTO_ERR (1L<<0)
+
+#define BNX2_EMAC_TX_MODE 0x000014bc
+#define BNX2_EMAC_TX_MODE_RESET (1L<<0)
+#define BNX2_EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3)
+#define BNX2_EMAC_TX_MODE_FLOW_EN (1L<<4)
+#define BNX2_EMAC_TX_MODE_BIG_BACKOFF (1L<<5)
+#define BNX2_EMAC_TX_MODE_LONG_PAUSE (1L<<6)
+#define BNX2_EMAC_TX_MODE_LINK_AWARE (1L<<7)
+
+#define BNX2_EMAC_TX_STATUS 0x000014c0
+#define BNX2_EMAC_TX_STATUS_XOFFED (1L<<0)
+#define BNX2_EMAC_TX_STATUS_XOFF_SENT (1L<<1)
+#define BNX2_EMAC_TX_STATUS_XON_SENT (1L<<2)
+#define BNX2_EMAC_TX_STATUS_LINK_UP (1L<<3)
+#define BNX2_EMAC_TX_STATUS_UNDERRUN (1L<<4)
+
+#define BNX2_EMAC_TX_LENGTHS 0x000014c4
+#define BNX2_EMAC_TX_LENGTHS_SLOT (0xffL<<0)
+#define BNX2_EMAC_TX_LENGTHS_IPG (0xfL<<8)
+#define BNX2_EMAC_TX_LENGTHS_IPG_CRS (0x3L<<12)
+
+#define BNX2_EMAC_RX_MODE 0x000014c8
+#define BNX2_EMAC_RX_MODE_RESET (1L<<0)
+#define BNX2_EMAC_RX_MODE_FLOW_EN (1L<<2)
+#define BNX2_EMAC_RX_MODE_KEEP_MAC_CONTROL (1L<<3)
+#define BNX2_EMAC_RX_MODE_KEEP_PAUSE (1L<<4)
+#define BNX2_EMAC_RX_MODE_ACCEPT_OVERSIZE (1L<<5)
+#define BNX2_EMAC_RX_MODE_ACCEPT_RUNTS (1L<<6)
+#define BNX2_EMAC_RX_MODE_LLC_CHK (1L<<7)
+#define BNX2_EMAC_RX_MODE_PROMISCUOUS (1L<<8)
+#define BNX2_EMAC_RX_MODE_NO_CRC_CHK (1L<<9)
+#define BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10)
+#define BNX2_EMAC_RX_MODE_FILT_BROADCAST (1L<<11)
+#define BNX2_EMAC_RX_MODE_SORT_MODE (1L<<12)
+
+#define BNX2_EMAC_RX_STATUS 0x000014cc
+#define BNX2_EMAC_RX_STATUS_FFED (1L<<0)
+#define BNX2_EMAC_RX_STATUS_FF_RECEIVED (1L<<1)
+#define BNX2_EMAC_RX_STATUS_N_RECEIVED (1L<<2)
+
+#define BNX2_EMAC_MULTICAST_HASH0 0x000014d0
+#define BNX2_EMAC_MULTICAST_HASH1 0x000014d4
+#define BNX2_EMAC_MULTICAST_HASH2 0x000014d8
+#define BNX2_EMAC_MULTICAST_HASH3 0x000014dc
+#define BNX2_EMAC_MULTICAST_HASH4 0x000014e0
+#define BNX2_EMAC_MULTICAST_HASH5 0x000014e4
+#define BNX2_EMAC_MULTICAST_HASH6 0x000014e8
+#define BNX2_EMAC_MULTICAST_HASH7 0x000014ec
+#define BNX2_EMAC_RX_STAT_IFHCINOCTETS 0x00001500
+#define BNX2_EMAC_RX_STAT_IFHCINBADOCTETS 0x00001504
+#define BNX2_EMAC_RX_STAT_ETHERSTATSFRAGMENTS 0x00001508
+#define BNX2_EMAC_RX_STAT_IFHCINUCASTPKTS 0x0000150c
+#define BNX2_EMAC_RX_STAT_IFHCINMULTICASTPKTS 0x00001510
+#define BNX2_EMAC_RX_STAT_IFHCINBROADCASTPKTS 0x00001514
+#define BNX2_EMAC_RX_STAT_DOT3STATSFCSERRORS 0x00001518
+#define BNX2_EMAC_RX_STAT_DOT3STATSALIGNMENTERRORS 0x0000151c
+#define BNX2_EMAC_RX_STAT_DOT3STATSCARRIERSENSEERRORS 0x00001520
+#define BNX2_EMAC_RX_STAT_XONPAUSEFRAMESRECEIVED 0x00001524
+#define BNX2_EMAC_RX_STAT_XOFFPAUSEFRAMESRECEIVED 0x00001528
+#define BNX2_EMAC_RX_STAT_MACCONTROLFRAMESRECEIVED 0x0000152c
+#define BNX2_EMAC_RX_STAT_XOFFSTATEENTERED 0x00001530
+#define BNX2_EMAC_RX_STAT_DOT3STATSFRAMESTOOLONG 0x00001534
+#define BNX2_EMAC_RX_STAT_ETHERSTATSJABBERS 0x00001538
+#define BNX2_EMAC_RX_STAT_ETHERSTATSUNDERSIZEPKTS 0x0000153c
+#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS64OCTETS 0x00001540
+#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS65OCTETSTO127OCTETS 0x00001544
+#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS128OCTETSTO255OCTETS 0x00001548
+#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS256OCTETSTO511OCTETS 0x0000154c
+#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS512OCTETSTO1023OCTETS 0x00001550
+#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS1024OCTETSTO1522OCTETS 0x00001554
+#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS1523OCTETSTO9022OCTETS 0x00001558
+#define BNX2_EMAC_RXMAC_DEBUG0 0x0000155c
+#define BNX2_EMAC_RXMAC_DEBUG1 0x00001560
+#define BNX2_EMAC_RXMAC_DEBUG1_LENGTH_NE_BYTE_COUNT (1L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG1_LENGTH_OUT_RANGE (1L<<1)
+#define BNX2_EMAC_RXMAC_DEBUG1_BAD_CRC (1L<<2)
+#define BNX2_EMAC_RXMAC_DEBUG1_RX_ERROR (1L<<3)
+#define BNX2_EMAC_RXMAC_DEBUG1_ALIGN_ERROR (1L<<4)
+#define BNX2_EMAC_RXMAC_DEBUG1_LAST_DATA (1L<<5)
+#define BNX2_EMAC_RXMAC_DEBUG1_ODD_BYTE_START (1L<<6)
+#define BNX2_EMAC_RXMAC_DEBUG1_BYTE_COUNT (0xffffL<<7)
+#define BNX2_EMAC_RXMAC_DEBUG1_SLOT_TIME (0xffL<<23)
+
+#define BNX2_EMAC_RXMAC_DEBUG2 0x00001564
+#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE (0x7L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_IDLE (0x0L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_SFD (0x1L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_DATA (0x2L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_SKEEP (0x3L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_EXT (0x4L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_DROP (0x5L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_SDROP (0x6L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_FC (0x7L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE (0xfL<<3)
+#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_IDLE (0x0L<<3)
+#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA0 (0x1L<<3)
+#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA1 (0x2L<<3)
+#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA2 (0x3L<<3)
+#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA3 (0x4L<<3)
+#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_ABORT (0x5L<<3)
+#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_WAIT (0x6L<<3)
+#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_STATUS (0x7L<<3)
+#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_LAST (0x8L<<3)
+#define BNX2_EMAC_RXMAC_DEBUG2_BYTE_IN (0xffL<<7)
+#define BNX2_EMAC_RXMAC_DEBUG2_FALSEC (1L<<15)
+#define BNX2_EMAC_RXMAC_DEBUG2_TAGGED (1L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG2_PAUSE_STATE (1L<<18)
+#define BNX2_EMAC_RXMAC_DEBUG2_PAUSE_STATE_IDLE (0L<<18)
+#define BNX2_EMAC_RXMAC_DEBUG2_PAUSE_STATE_PAUSED (1L<<18)
+#define BNX2_EMAC_RXMAC_DEBUG2_SE_COUNTER (0xfL<<19)
+#define BNX2_EMAC_RXMAC_DEBUG2_QUANTA (0x1fL<<23)
+
+#define BNX2_EMAC_RXMAC_DEBUG3 0x00001568
+#define BNX2_EMAC_RXMAC_DEBUG3_PAUSE_CTR (0xffffL<<0)
+#define BNX2_EMAC_RXMAC_DEBUG3_TMP_PAUSE_CTR (0xffffL<<16)
+
+#define BNX2_EMAC_RXMAC_DEBUG4 0x0000156c
+#define BNX2_EMAC_RXMAC_DEBUG4_TYPE_FIELD (0xffffL<<0)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE (0x3fL<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_IDLE (0x0L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UMAC2 (0x1L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UMAC3 (0x2L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UNI (0x3L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MMAC2 (0x7L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MMAC3 (0x5L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA1 (0x6L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA2 (0x7L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA3 (0x8L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MC2 (0x9L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MC3 (0xaL<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MWAIT1 (0xeL<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MWAIT2 (0xfL<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MCHECK (0x10L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MC (0x11L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BC2 (0x12L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BC3 (0x13L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BSA1 (0x14L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BSA2 (0x15L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BSA3 (0x16L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BTYPE (0x17L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BC (0x18L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PTYPE (0x19L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_CMD (0x1aL<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MAC (0x1bL<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_LATCH (0x1cL<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_XOFF (0x1dL<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_XON (0x1eL<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PAUSED (0x1fL<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_NPAUSED (0x20L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_TTYPE (0x21L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_TVAL (0x22L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_USA1 (0x23L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_USA2 (0x24L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_USA3 (0x25L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UTYPE (0x26L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UTTYPE (0x27L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UTVAL (0x28L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MTYPE (0x29L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_DROP (0x2aL<<16)
+#define BNX2_EMAC_RXMAC_DEBUG4_DROP_PKT (1L<<22)
+#define BNX2_EMAC_RXMAC_DEBUG4_SLOT_FILLED (1L<<23)
+#define BNX2_EMAC_RXMAC_DEBUG4_FALSE_CARRIER (1L<<24)
+#define BNX2_EMAC_RXMAC_DEBUG4_LAST_DATA (1L<<25)
+#define BNX2_EMAC_RXMAC_DEBUG4_sfd_FOUND (1L<<26)
+#define BNX2_EMAC_RXMAC_DEBUG4_ADVANCE (1L<<27)
+#define BNX2_EMAC_RXMAC_DEBUG4_START (1L<<28)
+
+#define BNX2_EMAC_RXMAC_DEBUG5 0x00001570
+#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM (0x7L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_IDLE (0L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_WAIT_EOF (1L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_WAIT_STAT (2L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_SET_EOF4FCRC (3L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_SET_EOF4RDE (4L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_SET_EOF4ALL (5L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_1WD_WAIT_STAT (6L<<0)
+#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1 (0x7L<<4)
+#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_VDW (0x0L<<4)
+#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_STAT (0x1L<<4)
+#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_AEOF (0x2L<<4)
+#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_NEOF (0x3L<<4)
+#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_SOF (0x4L<<4)
+#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_SAEOF (0x6L<<4)
+#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_SNEOF (0x7L<<4)
+#define BNX2_EMAC_RXMAC_DEBUG5_EOF_DETECTED (1L<<7)
+#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF0 (0x7L<<8)
+#define BNX2_EMAC_RXMAC_DEBUG5_RPM_IDI_FIFO_FULL (1L<<11)
+#define BNX2_EMAC_RXMAC_DEBUG5_LOAD_CCODE (1L<<12)
+#define BNX2_EMAC_RXMAC_DEBUG5_LOAD_DATA (1L<<13)
+#define BNX2_EMAC_RXMAC_DEBUG5_LOAD_STAT (1L<<14)
+#define BNX2_EMAC_RXMAC_DEBUG5_CLR_STAT (1L<<15)
+#define BNX2_EMAC_RXMAC_DEBUG5_IDI_RPM_CCODE (0x3L<<16)
+#define BNX2_EMAC_RXMAC_DEBUG5_IDI_RPM_ACCEPT (1L<<19)
+#define BNX2_EMAC_RXMAC_DEBUG5_FMLEN (0xfffL<<20)
+
+#define BNX2_EMAC_RX_STAT_AC0 0x00001580
+#define BNX2_EMAC_RX_STAT_AC1 0x00001584
+#define BNX2_EMAC_RX_STAT_AC2 0x00001588
+#define BNX2_EMAC_RX_STAT_AC3 0x0000158c
+#define BNX2_EMAC_RX_STAT_AC4 0x00001590
+#define BNX2_EMAC_RX_STAT_AC5 0x00001594
+#define BNX2_EMAC_RX_STAT_AC6 0x00001598
+#define BNX2_EMAC_RX_STAT_AC7 0x0000159c
+#define BNX2_EMAC_RX_STAT_AC8 0x000015a0
+#define BNX2_EMAC_RX_STAT_AC9 0x000015a4
+#define BNX2_EMAC_RX_STAT_AC10 0x000015a8
+#define BNX2_EMAC_RX_STAT_AC11 0x000015ac
+#define BNX2_EMAC_RX_STAT_AC12 0x000015b0
+#define BNX2_EMAC_RX_STAT_AC13 0x000015b4
+#define BNX2_EMAC_RX_STAT_AC14 0x000015b8
+#define BNX2_EMAC_RX_STAT_AC15 0x000015bc
+#define BNX2_EMAC_RX_STAT_AC16 0x000015c0
+#define BNX2_EMAC_RX_STAT_AC17 0x000015c4
+#define BNX2_EMAC_RX_STAT_AC18 0x000015c8
+#define BNX2_EMAC_RX_STAT_AC19 0x000015cc
+#define BNX2_EMAC_RX_STAT_AC20 0x000015d0
+#define BNX2_EMAC_RX_STAT_AC21 0x000015d4
+#define BNX2_EMAC_RX_STAT_AC22 0x000015d8
+#define BNX2_EMAC_RXMAC_SUC_DBG_OVERRUNVEC 0x000015dc
+#define BNX2_EMAC_TX_STAT_IFHCOUTOCTETS 0x00001600
+#define BNX2_EMAC_TX_STAT_IFHCOUTBADOCTETS 0x00001604
+#define BNX2_EMAC_TX_STAT_ETHERSTATSCOLLISIONS 0x00001608
+#define BNX2_EMAC_TX_STAT_OUTXONSENT 0x0000160c
+#define BNX2_EMAC_TX_STAT_OUTXOFFSENT 0x00001610
+#define BNX2_EMAC_TX_STAT_FLOWCONTROLDONE 0x00001614
+#define BNX2_EMAC_TX_STAT_DOT3STATSSINGLECOLLISIONFRAMES 0x00001618
+#define BNX2_EMAC_TX_STAT_DOT3STATSMULTIPLECOLLISIONFRAMES 0x0000161c
+#define BNX2_EMAC_TX_STAT_DOT3STATSDEFERREDTRANSMISSIONS 0x00001620
+#define BNX2_EMAC_TX_STAT_DOT3STATSEXCESSIVECOLLISIONS 0x00001624
+#define BNX2_EMAC_TX_STAT_DOT3STATSLATECOLLISIONS 0x00001628
+#define BNX2_EMAC_TX_STAT_IFHCOUTUCASTPKTS 0x0000162c
+#define BNX2_EMAC_TX_STAT_IFHCOUTMULTICASTPKTS 0x00001630
+#define BNX2_EMAC_TX_STAT_IFHCOUTBROADCASTPKTS 0x00001634
+#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS64OCTETS 0x00001638
+#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS65OCTETSTO127OCTETS 0x0000163c
+#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS128OCTETSTO255OCTETS 0x00001640
+#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS256OCTETSTO511OCTETS 0x00001644
+#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS512OCTETSTO1023OCTETS 0x00001648
+#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS1024OCTETSTO1522OCTETS 0x0000164c
+#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS1523OCTETSTO9022OCTETS 0x00001650
+#define BNX2_EMAC_TX_STAT_DOT3STATSINTERNALMACTRANSMITERRORS 0x00001654
+#define BNX2_EMAC_TXMAC_DEBUG0 0x00001658
+#define BNX2_EMAC_TXMAC_DEBUG1 0x0000165c
+#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE (0xfL<<0)
+#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_IDLE (0x0L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_START0 (0x1L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA0 (0x4L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA1 (0x5L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA2 (0x6L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA3 (0x7L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_WAIT0 (0x8L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_WAIT1 (0x9L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG1_CRS_ENABLE (1L<<4)
+#define BNX2_EMAC_TXMAC_DEBUG1_BAD_CRC (1L<<5)
+#define BNX2_EMAC_TXMAC_DEBUG1_SE_COUNTER (0xfL<<6)
+#define BNX2_EMAC_TXMAC_DEBUG1_SEND_PAUSE (1L<<10)
+#define BNX2_EMAC_TXMAC_DEBUG1_LATE_COLLISION (1L<<11)
+#define BNX2_EMAC_TXMAC_DEBUG1_MAX_DEFER (1L<<12)
+#define BNX2_EMAC_TXMAC_DEBUG1_DEFERRED (1L<<13)
+#define BNX2_EMAC_TXMAC_DEBUG1_ONE_BYTE (1L<<14)
+#define BNX2_EMAC_TXMAC_DEBUG1_IPG_TIME (0xfL<<15)
+#define BNX2_EMAC_TXMAC_DEBUG1_SLOT_TIME (0xffL<<19)
+
+#define BNX2_EMAC_TXMAC_DEBUG2 0x00001660
+#define BNX2_EMAC_TXMAC_DEBUG2_BACK_OFF (0x3ffL<<0)
+#define BNX2_EMAC_TXMAC_DEBUG2_BYTE_COUNT (0xffffL<<10)
+#define BNX2_EMAC_TXMAC_DEBUG2_COL_COUNT (0x1fL<<26)
+#define BNX2_EMAC_TXMAC_DEBUG2_COL_BIT (1L<<31)
+
+#define BNX2_EMAC_TXMAC_DEBUG3 0x00001664
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE (0xfL<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_IDLE (0x0L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_PRE1 (0x1L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_PRE2 (0x2L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_SFD (0x3L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_DATA (0x4L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_CRC1 (0x5L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_CRC2 (0x6L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_EXT (0x7L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_STATB (0x8L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_STATG (0x9L<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_JAM (0xaL<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_EJAM (0xbL<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_BJAM (0xcL<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_SWAIT (0xdL<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_BACKOFF (0xeL<<0)
+#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE (0x7L<<4)
+#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_IDLE (0x0L<<4)
+#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_WAIT (0x1L<<4)
+#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_UNI (0x2L<<4)
+#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_MC (0x3L<<4)
+#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_BC2 (0x4L<<4)
+#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_BC3 (0x5L<<4)
+#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_BC (0x6L<<4)
+#define BNX2_EMAC_TXMAC_DEBUG3_CRS_DONE (1L<<7)
+#define BNX2_EMAC_TXMAC_DEBUG3_XOFF (1L<<8)
+#define BNX2_EMAC_TXMAC_DEBUG3_SE_COUNTER (0xfL<<9)
+#define BNX2_EMAC_TXMAC_DEBUG3_QUANTA_COUNTER (0x1fL<<13)
+
+#define BNX2_EMAC_TXMAC_DEBUG4 0x00001668
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_COUNTER (0xffffL<<0)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE (0xfL<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_IDLE (0x0L<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA1 (0x2L<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA2 (0x3L<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA3 (0x6L<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC1 (0x7L<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC2 (0x5L<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC3 (0x4L<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_TYPE (0xcL<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CMD (0xeL<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_TIME (0xaL<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CRC1 (0x8L<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CRC2 (0x9L<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_WAIT (0xdL<<16)
+#define BNX2_EMAC_TXMAC_DEBUG4_STATS0_VALID (1L<<20)
+#define BNX2_EMAC_TXMAC_DEBUG4_APPEND_CRC (1L<<21)
+#define BNX2_EMAC_TXMAC_DEBUG4_SLOT_FILLED (1L<<22)
+#define BNX2_EMAC_TXMAC_DEBUG4_MAX_DEFER (1L<<23)
+#define BNX2_EMAC_TXMAC_DEBUG4_SEND_EXTEND (1L<<24)
+#define BNX2_EMAC_TXMAC_DEBUG4_SEND_PADDING (1L<<25)
+#define BNX2_EMAC_TXMAC_DEBUG4_EOF_LOC (1L<<26)
+#define BNX2_EMAC_TXMAC_DEBUG4_COLLIDING (1L<<27)
+#define BNX2_EMAC_TXMAC_DEBUG4_COL_IN (1L<<28)
+#define BNX2_EMAC_TXMAC_DEBUG4_BURSTING (1L<<29)
+#define BNX2_EMAC_TXMAC_DEBUG4_ADVANCE (1L<<30)
+#define BNX2_EMAC_TXMAC_DEBUG4_GO (1L<<31)
+
+#define BNX2_EMAC_TX_STAT_AC0 0x00001680
+#define BNX2_EMAC_TX_STAT_AC1 0x00001684
+#define BNX2_EMAC_TX_STAT_AC2 0x00001688
+#define BNX2_EMAC_TX_STAT_AC3 0x0000168c
+#define BNX2_EMAC_TX_STAT_AC4 0x00001690
+#define BNX2_EMAC_TX_STAT_AC5 0x00001694
+#define BNX2_EMAC_TX_STAT_AC6 0x00001698
+#define BNX2_EMAC_TX_STAT_AC7 0x0000169c
+#define BNX2_EMAC_TX_STAT_AC8 0x000016a0
+#define BNX2_EMAC_TX_STAT_AC9 0x000016a4
+#define BNX2_EMAC_TX_STAT_AC10 0x000016a8
+#define BNX2_EMAC_TX_STAT_AC11 0x000016ac
+#define BNX2_EMAC_TX_STAT_AC12 0x000016b0
+#define BNX2_EMAC_TX_STAT_AC13 0x000016b4
+#define BNX2_EMAC_TX_STAT_AC14 0x000016b8
+#define BNX2_EMAC_TX_STAT_AC15 0x000016bc
+#define BNX2_EMAC_TX_STAT_AC16 0x000016c0
+#define BNX2_EMAC_TX_STAT_AC17 0x000016c4
+#define BNX2_EMAC_TX_STAT_AC18 0x000016c8
+#define BNX2_EMAC_TX_STAT_AC19 0x000016cc
+#define BNX2_EMAC_TX_STAT_AC20 0x000016d0
+#define BNX2_EMAC_TX_STAT_AC21 0x000016d4
+#define BNX2_EMAC_TXMAC_SUC_DBG_OVERRUNVEC 0x000016d8
+
+
+/*
+ * rpm_reg definition
+ * offset: 0x1800
+ */
+#define BNX2_RPM_COMMAND 0x00001800
+#define BNX2_RPM_COMMAND_ENABLED (1L<<0)
+#define BNX2_RPM_COMMAND_OVERRUN_ABORT (1L<<4)
+
+#define BNX2_RPM_STATUS 0x00001804
+#define BNX2_RPM_STATUS_MBUF_WAIT (1L<<0)
+#define BNX2_RPM_STATUS_FREE_WAIT (1L<<1)
+
+#define BNX2_RPM_CONFIG 0x00001808
+#define BNX2_RPM_CONFIG_NO_PSD_HDR_CKSUM (1L<<0)
+#define BNX2_RPM_CONFIG_ACPI_ENA (1L<<1)
+#define BNX2_RPM_CONFIG_ACPI_KEEP (1L<<2)
+#define BNX2_RPM_CONFIG_MP_KEEP (1L<<3)
+#define BNX2_RPM_CONFIG_SORT_VECT_VAL (0xfL<<4)
+#define BNX2_RPM_CONFIG_IGNORE_VLAN (1L<<31)
+
+#define BNX2_RPM_VLAN_MATCH0 0x00001810
+#define BNX2_RPM_VLAN_MATCH0_RPM_VLAN_MTCH0_VALUE (0xfffL<<0)
+
+#define BNX2_RPM_VLAN_MATCH1 0x00001814
+#define BNX2_RPM_VLAN_MATCH1_RPM_VLAN_MTCH1_VALUE (0xfffL<<0)
+
+#define BNX2_RPM_VLAN_MATCH2 0x00001818
+#define BNX2_RPM_VLAN_MATCH2_RPM_VLAN_MTCH2_VALUE (0xfffL<<0)
+
+#define BNX2_RPM_VLAN_MATCH3 0x0000181c
+#define BNX2_RPM_VLAN_MATCH3_RPM_VLAN_MTCH3_VALUE (0xfffL<<0)
+
+#define BNX2_RPM_SORT_USER0 0x00001820
+#define BNX2_RPM_SORT_USER0_PM_EN (0xffffL<<0)
+#define BNX2_RPM_SORT_USER0_BC_EN (1L<<16)
+#define BNX2_RPM_SORT_USER0_MC_EN (1L<<17)
+#define BNX2_RPM_SORT_USER0_MC_HSH_EN (1L<<18)
+#define BNX2_RPM_SORT_USER0_PROM_EN (1L<<19)
+#define BNX2_RPM_SORT_USER0_VLAN_EN (0xfL<<20)
+#define BNX2_RPM_SORT_USER0_PROM_VLAN (1L<<24)
+#define BNX2_RPM_SORT_USER0_ENA (1L<<31)
+
+#define BNX2_RPM_SORT_USER1 0x00001824
+#define BNX2_RPM_SORT_USER1_PM_EN (0xffffL<<0)
+#define BNX2_RPM_SORT_USER1_BC_EN (1L<<16)
+#define BNX2_RPM_SORT_USER1_MC_EN (1L<<17)
+#define BNX2_RPM_SORT_USER1_MC_HSH_EN (1L<<18)
+#define BNX2_RPM_SORT_USER1_PROM_EN (1L<<19)
+#define BNX2_RPM_SORT_USER1_VLAN_EN (0xfL<<20)
+#define BNX2_RPM_SORT_USER1_PROM_VLAN (1L<<24)
+#define BNX2_RPM_SORT_USER1_ENA (1L<<31)
+
+#define BNX2_RPM_SORT_USER2 0x00001828
+#define BNX2_RPM_SORT_USER2_PM_EN (0xffffL<<0)
+#define BNX2_RPM_SORT_USER2_BC_EN (1L<<16)
+#define BNX2_RPM_SORT_USER2_MC_EN (1L<<17)
+#define BNX2_RPM_SORT_USER2_MC_HSH_EN (1L<<18)
+#define BNX2_RPM_SORT_USER2_PROM_EN (1L<<19)
+#define BNX2_RPM_SORT_USER2_VLAN_EN (0xfL<<20)
+#define BNX2_RPM_SORT_USER2_PROM_VLAN (1L<<24)
+#define BNX2_RPM_SORT_USER2_ENA (1L<<31)
+
+#define BNX2_RPM_SORT_USER3 0x0000182c
+#define BNX2_RPM_SORT_USER3_PM_EN (0xffffL<<0)
+#define BNX2_RPM_SORT_USER3_BC_EN (1L<<16)
+#define BNX2_RPM_SORT_USER3_MC_EN (1L<<17)
+#define BNX2_RPM_SORT_USER3_MC_HSH_EN (1L<<18)
+#define BNX2_RPM_SORT_USER3_PROM_EN (1L<<19)
+#define BNX2_RPM_SORT_USER3_VLAN_EN (0xfL<<20)
+#define BNX2_RPM_SORT_USER3_PROM_VLAN (1L<<24)
+#define BNX2_RPM_SORT_USER3_ENA (1L<<31)
+
+#define BNX2_RPM_STAT_L2_FILTER_DISCARDS 0x00001840
+#define BNX2_RPM_STAT_RULE_CHECKER_DISCARDS 0x00001844
+#define BNX2_RPM_STAT_IFINFTQDISCARDS 0x00001848
+#define BNX2_RPM_STAT_IFINMBUFDISCARD 0x0000184c
+#define BNX2_RPM_STAT_RULE_CHECKER_P4_HIT 0x00001850
+#define BNX2_RPM_STAT_AC0 0x00001880
+#define BNX2_RPM_STAT_AC1 0x00001884
+#define BNX2_RPM_STAT_AC2 0x00001888
+#define BNX2_RPM_STAT_AC3 0x0000188c
+#define BNX2_RPM_STAT_AC4 0x00001890
+#define BNX2_RPM_RC_CNTL_0 0x00001900
+#define BNX2_RPM_RC_CNTL_0_OFFSET (0xffL<<0)
+#define BNX2_RPM_RC_CNTL_0_CLASS (0x7L<<8)
+#define BNX2_RPM_RC_CNTL_0_PRIORITY (1L<<11)
+#define BNX2_RPM_RC_CNTL_0_P4 (1L<<12)
+#define BNX2_RPM_RC_CNTL_0_HDR_TYPE (0x7L<<13)
+#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_START (0L<<13)
+#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_IP (1L<<13)
+#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_TCP (2L<<13)
+#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_UDP (3L<<13)
+#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_DATA (4L<<13)
+#define BNX2_RPM_RC_CNTL_0_COMP (0x3L<<16)
+#define BNX2_RPM_RC_CNTL_0_COMP_EQUAL (0L<<16)
+#define BNX2_RPM_RC_CNTL_0_COMP_NEQUAL (1L<<16)
+#define BNX2_RPM_RC_CNTL_0_COMP_GREATER (2L<<16)
+#define BNX2_RPM_RC_CNTL_0_COMP_LESS (3L<<16)
+#define BNX2_RPM_RC_CNTL_0_SBIT (1L<<19)
+#define BNX2_RPM_RC_CNTL_0_CMDSEL (0xfL<<20)
+#define BNX2_RPM_RC_CNTL_0_MAP (1L<<24)
+#define BNX2_RPM_RC_CNTL_0_DISCARD (1L<<25)
+#define BNX2_RPM_RC_CNTL_0_MASK (1L<<26)
+#define BNX2_RPM_RC_CNTL_0_P1 (1L<<27)
+#define BNX2_RPM_RC_CNTL_0_P2 (1L<<28)
+#define BNX2_RPM_RC_CNTL_0_P3 (1L<<29)
+#define BNX2_RPM_RC_CNTL_0_NBIT (1L<<30)
+
+#define BNX2_RPM_RC_VALUE_MASK_0 0x00001904
+#define BNX2_RPM_RC_VALUE_MASK_0_VALUE (0xffffL<<0)
+#define BNX2_RPM_RC_VALUE_MASK_0_MASK (0xffffL<<16)
+
+#define BNX2_RPM_RC_CNTL_1 0x00001908
+#define BNX2_RPM_RC_CNTL_1_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_1_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_1 0x0000190c
+#define BNX2_RPM_RC_CNTL_2 0x00001910
+#define BNX2_RPM_RC_CNTL_2_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_2_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_2 0x00001914
+#define BNX2_RPM_RC_CNTL_3 0x00001918
+#define BNX2_RPM_RC_CNTL_3_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_3_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_3 0x0000191c
+#define BNX2_RPM_RC_CNTL_4 0x00001920
+#define BNX2_RPM_RC_CNTL_4_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_4_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_4 0x00001924
+#define BNX2_RPM_RC_CNTL_5 0x00001928
+#define BNX2_RPM_RC_CNTL_5_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_5_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_5 0x0000192c
+#define BNX2_RPM_RC_CNTL_6 0x00001930
+#define BNX2_RPM_RC_CNTL_6_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_6_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_6 0x00001934
+#define BNX2_RPM_RC_CNTL_7 0x00001938
+#define BNX2_RPM_RC_CNTL_7_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_7_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_7 0x0000193c
+#define BNX2_RPM_RC_CNTL_8 0x00001940
+#define BNX2_RPM_RC_CNTL_8_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_8_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_8 0x00001944
+#define BNX2_RPM_RC_CNTL_9 0x00001948
+#define BNX2_RPM_RC_CNTL_9_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_9_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_9 0x0000194c
+#define BNX2_RPM_RC_CNTL_10 0x00001950
+#define BNX2_RPM_RC_CNTL_10_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_10_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_10 0x00001954
+#define BNX2_RPM_RC_CNTL_11 0x00001958
+#define BNX2_RPM_RC_CNTL_11_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_11_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_11 0x0000195c
+#define BNX2_RPM_RC_CNTL_12 0x00001960
+#define BNX2_RPM_RC_CNTL_12_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_12_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_12 0x00001964
+#define BNX2_RPM_RC_CNTL_13 0x00001968
+#define BNX2_RPM_RC_CNTL_13_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_13_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_13 0x0000196c
+#define BNX2_RPM_RC_CNTL_14 0x00001970
+#define BNX2_RPM_RC_CNTL_14_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_14_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_14 0x00001974
+#define BNX2_RPM_RC_CNTL_15 0x00001978
+#define BNX2_RPM_RC_CNTL_15_A (0x3ffffL<<0)
+#define BNX2_RPM_RC_CNTL_15_B (0xfffL<<19)
+
+#define BNX2_RPM_RC_VALUE_MASK_15 0x0000197c
+#define BNX2_RPM_RC_CONFIG 0x00001980
+#define BNX2_RPM_RC_CONFIG_RULE_ENABLE (0xffffL<<0)
+#define BNX2_RPM_RC_CONFIG_DEF_CLASS (0x7L<<24)
+
+#define BNX2_RPM_DEBUG0 0x00001984
+#define BNX2_RPM_DEBUG0_FM_BCNT (0xffffL<<0)
+#define BNX2_RPM_DEBUG0_T_DATA_OFST_VLD (1L<<16)
+#define BNX2_RPM_DEBUG0_T_UDP_OFST_VLD (1L<<17)
+#define BNX2_RPM_DEBUG0_T_TCP_OFST_VLD (1L<<18)
+#define BNX2_RPM_DEBUG0_T_IP_OFST_VLD (1L<<19)
+#define BNX2_RPM_DEBUG0_IP_MORE_FRGMT (1L<<20)
+#define BNX2_RPM_DEBUG0_T_IP_NO_TCP_UDP_HDR (1L<<21)
+#define BNX2_RPM_DEBUG0_LLC_SNAP (1L<<22)
+#define BNX2_RPM_DEBUG0_FM_STARTED (1L<<23)
+#define BNX2_RPM_DEBUG0_DONE (1L<<24)
+#define BNX2_RPM_DEBUG0_WAIT_4_DONE (1L<<25)
+#define BNX2_RPM_DEBUG0_USE_TPBUF_CKSUM (1L<<26)
+#define BNX2_RPM_DEBUG0_RX_NO_PSD_HDR_CKSUM (1L<<27)
+#define BNX2_RPM_DEBUG0_IGNORE_VLAN (1L<<28)
+#define BNX2_RPM_DEBUG0_RP_ENA_ACTIVE (1L<<31)
+
+#define BNX2_RPM_DEBUG1 0x00001988
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST (0xffffL<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_IDLE (0L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B6_ALL (1L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B2_IPLLC (2L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B6_IP (4L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B2_IP (8L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_IP_START (16L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_IP (32L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_TCP (64L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_UDP (128L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_AH (256L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ESP (512L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ESP_PAYLOAD (1024L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_DATA (2048L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ADD_CARRY (0x2000L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ADD_CARRYOUT (0x4000L<<0)
+#define BNX2_RPM_DEBUG1_FSM_CUR_ST_LATCH_RESULT (0x8000L<<0)
+#define BNX2_RPM_DEBUG1_HDR_BCNT (0x7ffL<<16)
+#define BNX2_RPM_DEBUG1_UNKNOWN_ETYPE_D (1L<<28)
+#define BNX2_RPM_DEBUG1_VLAN_REMOVED_D2 (1L<<29)
+#define BNX2_RPM_DEBUG1_VLAN_REMOVED_D1 (1L<<30)
+#define BNX2_RPM_DEBUG1_EOF_0XTRA_WD (1L<<31)
+
+#define BNX2_RPM_DEBUG2 0x0000198c
+#define BNX2_RPM_DEBUG2_CMD_HIT_VEC (0xffffL<<0)
+#define BNX2_RPM_DEBUG2_IP_BCNT (0xffL<<16)
+#define BNX2_RPM_DEBUG2_THIS_CMD_M4 (1L<<24)
+#define BNX2_RPM_DEBUG2_THIS_CMD_M3 (1L<<25)
+#define BNX2_RPM_DEBUG2_THIS_CMD_M2 (1L<<26)
+#define BNX2_RPM_DEBUG2_THIS_CMD_M1 (1L<<27)
+#define BNX2_RPM_DEBUG2_IPIPE_EMPTY (1L<<28)
+#define BNX2_RPM_DEBUG2_FM_DISCARD (1L<<29)
+#define BNX2_RPM_DEBUG2_LAST_RULE_IN_FM_D2 (1L<<30)
+#define BNX2_RPM_DEBUG2_LAST_RULE_IN_FM_D1 (1L<<31)
+
+#define BNX2_RPM_DEBUG3 0x00001990
+#define BNX2_RPM_DEBUG3_AVAIL_MBUF_PTR (0x1ffL<<0)
+#define BNX2_RPM_DEBUG3_RDE_RLUPQ_WR_REQ_INT (1L<<9)
+#define BNX2_RPM_DEBUG3_RDE_RBUF_WR_LAST_INT (1L<<10)
+#define BNX2_RPM_DEBUG3_RDE_RBUF_WR_REQ_INT (1L<<11)
+#define BNX2_RPM_DEBUG3_RDE_RBUF_FREE_REQ (1L<<12)
+#define BNX2_RPM_DEBUG3_RDE_RBUF_ALLOC_REQ (1L<<13)
+#define BNX2_RPM_DEBUG3_DFSM_MBUF_NOTAVAIL (1L<<14)
+#define BNX2_RPM_DEBUG3_RBUF_RDE_SOF_DROP (1L<<15)
+#define BNX2_RPM_DEBUG3_DFIFO_VLD_ENTRY_CT (0xfL<<16)
+#define BNX2_RPM_DEBUG3_RDE_SRC_FIFO_ALMFULL (1L<<21)
+#define BNX2_RPM_DEBUG3_DROP_NXT_VLD (1L<<22)
+#define BNX2_RPM_DEBUG3_DROP_NXT (1L<<23)
+#define BNX2_RPM_DEBUG3_FTQ_FSM (0x3L<<24)
+#define BNX2_RPM_DEBUG3_FTQ_FSM_IDLE (0x0L<<24)
+#define BNX2_RPM_DEBUG3_FTQ_FSM_WAIT_ACK (0x1L<<24)
+#define BNX2_RPM_DEBUG3_FTQ_FSM_WAIT_FREE (0x2L<<24)
+#define BNX2_RPM_DEBUG3_MBWRITE_FSM (0x3L<<26)
+#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_SOF (0x0L<<26)
+#define BNX2_RPM_DEBUG3_MBWRITE_FSM_GET_MBUF (0x1L<<26)
+#define BNX2_RPM_DEBUG3_MBWRITE_FSM_DMA_DATA (0x2L<<26)
+#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_DATA (0x3L<<26)
+#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_EOF (0x4L<<26)
+#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_MF_ACK (0x5L<<26)
+#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_DROP_NXT_VLD (0x6L<<26)
+#define BNX2_RPM_DEBUG3_MBWRITE_FSM_DONE (0x7L<<26)
+#define BNX2_RPM_DEBUG3_MBFREE_FSM (1L<<29)
+#define BNX2_RPM_DEBUG3_MBFREE_FSM_IDLE (0L<<29)
+#define BNX2_RPM_DEBUG3_MBFREE_FSM_WAIT_ACK (1L<<29)
+#define BNX2_RPM_DEBUG3_MBALLOC_FSM (1L<<30)
+#define BNX2_RPM_DEBUG3_MBALLOC_FSM_ET_MBUF (0x0L<<30)
+#define BNX2_RPM_DEBUG3_MBALLOC_FSM_IVE_MBUF (0x1L<<30)
+#define BNX2_RPM_DEBUG3_CCODE_EOF_ERROR (1L<<31)
+
+#define BNX2_RPM_DEBUG4 0x00001994
+#define BNX2_RPM_DEBUG4_DFSM_MBUF_CLUSTER (0x1ffffffL<<0)
+#define BNX2_RPM_DEBUG4_DFIFO_CUR_CCODE (0x7L<<25)
+#define BNX2_RPM_DEBUG4_MBWRITE_FSM (0x7L<<28)
+#define BNX2_RPM_DEBUG4_DFIFO_EMPTY (1L<<31)
+
+#define BNX2_RPM_DEBUG5 0x00001998
+#define BNX2_RPM_DEBUG5_RDROP_WPTR (0x1fL<<0)
+#define BNX2_RPM_DEBUG5_RDROP_ACPI_RPTR (0x1fL<<5)
+#define BNX2_RPM_DEBUG5_RDROP_MC_RPTR (0x1fL<<10)
+#define BNX2_RPM_DEBUG5_RDROP_RC_RPTR (0x1fL<<15)
+#define BNX2_RPM_DEBUG5_RDROP_ACPI_EMPTY (1L<<20)
+#define BNX2_RPM_DEBUG5_RDROP_MC_EMPTY (1L<<21)
+#define BNX2_RPM_DEBUG5_RDROP_AEOF_VEC_AT_RDROP_MC_RPTR (1L<<22)
+#define BNX2_RPM_DEBUG5_HOLDREG_WOL_DROP_INT (1L<<23)
+#define BNX2_RPM_DEBUG5_HOLDREG_DISCARD (1L<<24)
+#define BNX2_RPM_DEBUG5_HOLDREG_MBUF_NOTAVAIL (1L<<25)
+#define BNX2_RPM_DEBUG5_HOLDREG_MC_EMPTY (1L<<26)
+#define BNX2_RPM_DEBUG5_HOLDREG_RC_EMPTY (1L<<27)
+#define BNX2_RPM_DEBUG5_HOLDREG_FC_EMPTY (1L<<28)
+#define BNX2_RPM_DEBUG5_HOLDREG_ACPI_EMPTY (1L<<29)
+#define BNX2_RPM_DEBUG5_HOLDREG_FULL_T (1L<<30)
+#define BNX2_RPM_DEBUG5_HOLDREG_RD (1L<<31)
+
+#define BNX2_RPM_DEBUG6 0x0000199c
+#define BNX2_RPM_DEBUG6_ACPI_VEC (0xffffL<<0)
+#define BNX2_RPM_DEBUG6_VEC (0xffffL<<16)
+
+#define BNX2_RPM_DEBUG7 0x000019a0
+#define BNX2_RPM_DEBUG7_RPM_DBG7_LAST_CRC (0xffffffffL<<0)
+
+#define BNX2_RPM_DEBUG8 0x000019a4
+#define BNX2_RPM_DEBUG8_PS_ACPI_FSM (0xfL<<0)
+#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_IDLE (0L<<0)
+#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_W1_ADDR (1L<<0)
+#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_W2_ADDR (2L<<0)
+#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_W3_ADDR (3L<<0)
+#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_WAIT_THBUF (4L<<0)
+#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W3_DATA (5L<<0)
+#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W0_ADDR (6L<<0)
+#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W1_ADDR (7L<<0)
+#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W2_ADDR (8L<<0)
+#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W3_ADDR (9L<<0)
+#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_WAIT_THBUF (10L<<0)
+#define BNX2_RPM_DEBUG8_COMPARE_AT_W0 (1L<<4)
+#define BNX2_RPM_DEBUG8_COMPARE_AT_W3_DATA (1L<<5)
+#define BNX2_RPM_DEBUG8_COMPARE_AT_SOF_WAIT (1L<<6)
+#define BNX2_RPM_DEBUG8_COMPARE_AT_SOF_W3 (1L<<7)
+#define BNX2_RPM_DEBUG8_COMPARE_AT_SOF_W2 (1L<<8)
+#define BNX2_RPM_DEBUG8_EOF_W_LTEQ6_VLDBYTES (1L<<9)
+#define BNX2_RPM_DEBUG8_EOF_W_LTEQ4_VLDBYTES (1L<<10)
+#define BNX2_RPM_DEBUG8_NXT_EOF_W_12_VLDBYTES (1L<<11)
+#define BNX2_RPM_DEBUG8_EOF_DET (1L<<12)
+#define BNX2_RPM_DEBUG8_SOF_DET (1L<<13)
+#define BNX2_RPM_DEBUG8_WAIT_4_SOF (1L<<14)
+#define BNX2_RPM_DEBUG8_ALL_DONE (1L<<15)
+#define BNX2_RPM_DEBUG8_THBUF_ADDR (0x7fL<<16)
+#define BNX2_RPM_DEBUG8_BYTE_CTR (0xffL<<24)
+
+#define BNX2_RPM_DEBUG9 0x000019a8
+#define BNX2_RPM_DEBUG9_OUTFIFO_COUNT (0x7L<<0)
+#define BNX2_RPM_DEBUG9_RDE_ACPI_RDY (1L<<3)
+#define BNX2_RPM_DEBUG9_VLD_RD_ENTRY_CT (0x7L<<4)
+#define BNX2_RPM_DEBUG9_OUTFIFO_OVERRUN_OCCURRED (1L<<28)
+#define BNX2_RPM_DEBUG9_INFIFO_OVERRUN_OCCURRED (1L<<29)
+#define BNX2_RPM_DEBUG9_ACPI_MATCH_INT (1L<<30)
+#define BNX2_RPM_DEBUG9_ACPI_ENABLE_SYN (1L<<31)
+
+#define BNX2_RPM_ACPI_DBG_BUF_W00 0x000019c0
+#define BNX2_RPM_ACPI_DBG_BUF_W01 0x000019c4
+#define BNX2_RPM_ACPI_DBG_BUF_W02 0x000019c8
+#define BNX2_RPM_ACPI_DBG_BUF_W03 0x000019cc
+#define BNX2_RPM_ACPI_DBG_BUF_W10 0x000019d0
+#define BNX2_RPM_ACPI_DBG_BUF_W11 0x000019d4
+#define BNX2_RPM_ACPI_DBG_BUF_W12 0x000019d8
+#define BNX2_RPM_ACPI_DBG_BUF_W13 0x000019dc
+#define BNX2_RPM_ACPI_DBG_BUF_W20 0x000019e0
+#define BNX2_RPM_ACPI_DBG_BUF_W21 0x000019e4
+#define BNX2_RPM_ACPI_DBG_BUF_W22 0x000019e8
+#define BNX2_RPM_ACPI_DBG_BUF_W23 0x000019ec
+#define BNX2_RPM_ACPI_DBG_BUF_W30 0x000019f0
+#define BNX2_RPM_ACPI_DBG_BUF_W31 0x000019f4
+#define BNX2_RPM_ACPI_DBG_BUF_W32 0x000019f8
+#define BNX2_RPM_ACPI_DBG_BUF_W33 0x000019fc
+
+
+/*
+ * rbuf_reg definition
+ * offset: 0x200000
+ */
+#define BNX2_RBUF_COMMAND 0x00200000
+#define BNX2_RBUF_COMMAND_ENABLED (1L<<0)
+#define BNX2_RBUF_COMMAND_FREE_INIT (1L<<1)
+#define BNX2_RBUF_COMMAND_RAM_INIT (1L<<2)
+#define BNX2_RBUF_COMMAND_OVER_FREE (1L<<4)
+#define BNX2_RBUF_COMMAND_ALLOC_REQ (1L<<5)
+
+#define BNX2_RBUF_STATUS1 0x00200004
+#define BNX2_RBUF_STATUS1_FREE_COUNT (0x3ffL<<0)
+
+#define BNX2_RBUF_STATUS2 0x00200008
+#define BNX2_RBUF_STATUS2_FREE_TAIL (0x3ffL<<0)
+#define BNX2_RBUF_STATUS2_FREE_HEAD (0x3ffL<<16)
+
+#define BNX2_RBUF_CONFIG 0x0020000c
+#define BNX2_RBUF_CONFIG_XOFF_TRIP (0x3ffL<<0)
+#define BNX2_RBUF_CONFIG_XON_TRIP (0x3ffL<<16)
+
+#define BNX2_RBUF_FW_BUF_ALLOC 0x00200010
+#define BNX2_RBUF_FW_BUF_ALLOC_VALUE (0x1ffL<<7)
+
+#define BNX2_RBUF_FW_BUF_FREE 0x00200014
+#define BNX2_RBUF_FW_BUF_FREE_COUNT (0x7fL<<0)
+#define BNX2_RBUF_FW_BUF_FREE_TAIL (0x1ffL<<7)
+#define BNX2_RBUF_FW_BUF_FREE_HEAD (0x1ffL<<16)
+
+#define BNX2_RBUF_FW_BUF_SEL 0x00200018
+#define BNX2_RBUF_FW_BUF_SEL_COUNT (0x7fL<<0)
+#define BNX2_RBUF_FW_BUF_SEL_TAIL (0x1ffL<<7)
+#define BNX2_RBUF_FW_BUF_SEL_HEAD (0x1ffL<<16)
+
+#define BNX2_RBUF_CONFIG2 0x0020001c
+#define BNX2_RBUF_CONFIG2_MAC_DROP_TRIP (0x3ffL<<0)
+#define BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP (0x3ffL<<16)
+
+#define BNX2_RBUF_CONFIG3 0x00200020
+#define BNX2_RBUF_CONFIG3_CU_DROP_TRIP (0x3ffL<<0)
+#define BNX2_RBUF_CONFIG3_CU_KEEP_TRIP (0x3ffL<<16)
+
+#define BNX2_RBUF_PKT_DATA 0x00208000
+#define BNX2_RBUF_CLIST_DATA 0x00210000
+#define BNX2_RBUF_BUF_DATA 0x00220000
+
+
+/*
+ * rv2p_reg definition
+ * offset: 0x2800
+ */
+#define BNX2_RV2P_COMMAND 0x00002800
+#define BNX2_RV2P_COMMAND_ENABLED (1L<<0)
+#define BNX2_RV2P_COMMAND_PROC1_INTRPT (1L<<1)
+#define BNX2_RV2P_COMMAND_PROC2_INTRPT (1L<<2)
+#define BNX2_RV2P_COMMAND_ABORT0 (1L<<4)
+#define BNX2_RV2P_COMMAND_ABORT1 (1L<<5)
+#define BNX2_RV2P_COMMAND_ABORT2 (1L<<6)
+#define BNX2_RV2P_COMMAND_ABORT3 (1L<<7)
+#define BNX2_RV2P_COMMAND_ABORT4 (1L<<8)
+#define BNX2_RV2P_COMMAND_ABORT5 (1L<<9)
+#define BNX2_RV2P_COMMAND_PROC1_RESET (1L<<16)
+#define BNX2_RV2P_COMMAND_PROC2_RESET (1L<<17)
+#define BNX2_RV2P_COMMAND_CTXIF_RESET (1L<<18)
+
+#define BNX2_RV2P_STATUS 0x00002804
+#define BNX2_RV2P_STATUS_ALWAYS_0 (1L<<0)
+#define BNX2_RV2P_STATUS_RV2P_GEN_STAT0_CNT (1L<<8)
+#define BNX2_RV2P_STATUS_RV2P_GEN_STAT1_CNT (1L<<9)
+#define BNX2_RV2P_STATUS_RV2P_GEN_STAT2_CNT (1L<<10)
+#define BNX2_RV2P_STATUS_RV2P_GEN_STAT3_CNT (1L<<11)
+#define BNX2_RV2P_STATUS_RV2P_GEN_STAT4_CNT (1L<<12)
+#define BNX2_RV2P_STATUS_RV2P_GEN_STAT5_CNT (1L<<13)
+
+#define BNX2_RV2P_CONFIG 0x00002808
+#define BNX2_RV2P_CONFIG_STALL_PROC1 (1L<<0)
+#define BNX2_RV2P_CONFIG_STALL_PROC2 (1L<<1)
+#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT0 (1L<<8)
+#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT1 (1L<<9)
+#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT2 (1L<<10)
+#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT3 (1L<<11)
+#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT4 (1L<<12)
+#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT5 (1L<<13)
+#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT0 (1L<<16)
+#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT1 (1L<<17)
+#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT2 (1L<<18)
+#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT3 (1L<<19)
+#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT4 (1L<<20)
+#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT5 (1L<<21)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE (0xfL<<24)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE_256 (0L<<24)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE_512 (1L<<24)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE_1K (2L<<24)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE_2K (3L<<24)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE_4K (4L<<24)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE_8K (5L<<24)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE_16K (6L<<24)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE_32K (7L<<24)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE_64K (8L<<24)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE_128K (9L<<24)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE_256K (10L<<24)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE_512K (11L<<24)
+#define BNX2_RV2P_CONFIG_PAGE_SIZE_1M (12L<<24)
+
+#define BNX2_RV2P_GEN_BFR_ADDR_0 0x00002810
+#define BNX2_RV2P_GEN_BFR_ADDR_0_VALUE (0xffffL<<16)
+
+#define BNX2_RV2P_GEN_BFR_ADDR_1 0x00002814
+#define BNX2_RV2P_GEN_BFR_ADDR_1_VALUE (0xffffL<<16)
+
+#define BNX2_RV2P_GEN_BFR_ADDR_2 0x00002818
+#define BNX2_RV2P_GEN_BFR_ADDR_2_VALUE (0xffffL<<16)
+
+#define BNX2_RV2P_GEN_BFR_ADDR_3 0x0000281c
+#define BNX2_RV2P_GEN_BFR_ADDR_3_VALUE (0xffffL<<16)
+
+#define BNX2_RV2P_INSTR_HIGH 0x00002830
+#define BNX2_RV2P_INSTR_HIGH_HIGH (0x1fL<<0)
+
+#define BNX2_RV2P_INSTR_LOW 0x00002834
+#define BNX2_RV2P_PROC1_ADDR_CMD 0x00002838
+#define BNX2_RV2P_PROC1_ADDR_CMD_ADD (0x3ffL<<0)
+#define BNX2_RV2P_PROC1_ADDR_CMD_RDWR (1L<<31)
+
+#define BNX2_RV2P_PROC2_ADDR_CMD 0x0000283c
+#define BNX2_RV2P_PROC2_ADDR_CMD_ADD (0x3ffL<<0)
+#define BNX2_RV2P_PROC2_ADDR_CMD_RDWR (1L<<31)
+
+#define BNX2_RV2P_PROC1_GRC_DEBUG 0x00002840
+#define BNX2_RV2P_PROC2_GRC_DEBUG 0x00002844
+#define BNX2_RV2P_GRC_PROC_DEBUG 0x00002848
+#define BNX2_RV2P_DEBUG_VECT_PEEK 0x0000284c
+#define BNX2_RV2P_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0)
+#define BNX2_RV2P_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11)
+#define BNX2_RV2P_DEBUG_VECT_PEEK_1_SEL (0xfL<<12)
+#define BNX2_RV2P_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16)
+#define BNX2_RV2P_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27)
+#define BNX2_RV2P_DEBUG_VECT_PEEK_2_SEL (0xfL<<28)
+
+#define BNX2_RV2P_PFTQ_DATA 0x00002b40
+#define BNX2_RV2P_PFTQ_CMD 0x00002b78
+#define BNX2_RV2P_PFTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_RV2P_PFTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_RV2P_PFTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_RV2P_PFTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_RV2P_PFTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_RV2P_PFTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_RV2P_PFTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_RV2P_PFTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_RV2P_PFTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_RV2P_PFTQ_CMD_POP (1L<<30)
+#define BNX2_RV2P_PFTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_RV2P_PFTQ_CTL 0x00002b7c
+#define BNX2_RV2P_PFTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_RV2P_PFTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_RV2P_PFTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_RV2P_PFTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_RV2P_PFTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+#define BNX2_RV2P_TFTQ_DATA 0x00002b80
+#define BNX2_RV2P_TFTQ_CMD 0x00002bb8
+#define BNX2_RV2P_TFTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_RV2P_TFTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_RV2P_TFTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_RV2P_TFTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_RV2P_TFTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_RV2P_TFTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_RV2P_TFTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_RV2P_TFTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_RV2P_TFTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_RV2P_TFTQ_CMD_POP (1L<<30)
+#define BNX2_RV2P_TFTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_RV2P_TFTQ_CTL 0x00002bbc
+#define BNX2_RV2P_TFTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_RV2P_TFTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_RV2P_TFTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_RV2P_TFTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_RV2P_TFTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+#define BNX2_RV2P_MFTQ_DATA 0x00002bc0
+#define BNX2_RV2P_MFTQ_CMD 0x00002bf8
+#define BNX2_RV2P_MFTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_RV2P_MFTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_RV2P_MFTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_RV2P_MFTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_RV2P_MFTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_RV2P_MFTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_RV2P_MFTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_RV2P_MFTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_RV2P_MFTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_RV2P_MFTQ_CMD_POP (1L<<30)
+#define BNX2_RV2P_MFTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_RV2P_MFTQ_CTL 0x00002bfc
+#define BNX2_RV2P_MFTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_RV2P_MFTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_RV2P_MFTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_RV2P_MFTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_RV2P_MFTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+
+
+/*
+ * mq_reg definition
+ * offset: 0x3c00
+ */
+#define BNX2_MQ_COMMAND 0x00003c00
+#define BNX2_MQ_COMMAND_ENABLED (1L<<0)
+#define BNX2_MQ_COMMAND_OVERFLOW (1L<<4)
+#define BNX2_MQ_COMMAND_WR_ERROR (1L<<5)
+#define BNX2_MQ_COMMAND_RD_ERROR (1L<<6)
+
+#define BNX2_MQ_STATUS 0x00003c04
+#define BNX2_MQ_STATUS_CTX_ACCESS_STAT (1L<<16)
+#define BNX2_MQ_STATUS_CTX_ACCESS64_STAT (1L<<17)
+#define BNX2_MQ_STATUS_PCI_STALL_STAT (1L<<18)
+
+#define BNX2_MQ_CONFIG 0x00003c08
+#define BNX2_MQ_CONFIG_TX_HIGH_PRI (1L<<0)
+#define BNX2_MQ_CONFIG_HALT_DIS (1L<<1)
+#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE (0x7L<<4)
+#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256 (0L<<4)
+#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_512 (1L<<4)
+#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_1K (2L<<4)
+#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_2K (3L<<4)
+#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_4K (4L<<4)
+#define BNX2_MQ_CONFIG_MAX_DEPTH (0x7fL<<8)
+#define BNX2_MQ_CONFIG_CUR_DEPTH (0x7fL<<20)
+
+#define BNX2_MQ_ENQUEUE1 0x00003c0c
+#define BNX2_MQ_ENQUEUE1_OFFSET (0x3fL<<2)
+#define BNX2_MQ_ENQUEUE1_CID (0x3fffL<<8)
+#define BNX2_MQ_ENQUEUE1_BYTE_MASK (0xfL<<24)
+#define BNX2_MQ_ENQUEUE1_KNL_MODE (1L<<28)
+
+#define BNX2_MQ_ENQUEUE2 0x00003c10
+#define BNX2_MQ_BAD_WR_ADDR 0x00003c14
+#define BNX2_MQ_BAD_RD_ADDR 0x00003c18
+#define BNX2_MQ_KNL_BYP_WIND_START 0x00003c1c
+#define BNX2_MQ_KNL_BYP_WIND_START_VALUE (0xfffffL<<12)
+
+#define BNX2_MQ_KNL_WIND_END 0x00003c20
+#define BNX2_MQ_KNL_WIND_END_VALUE (0xffffffL<<8)
+
+#define BNX2_MQ_KNL_WRITE_MASK1 0x00003c24
+#define BNX2_MQ_KNL_TX_MASK1 0x00003c28
+#define BNX2_MQ_KNL_CMD_MASK1 0x00003c2c
+#define BNX2_MQ_KNL_COND_ENQUEUE_MASK1 0x00003c30
+#define BNX2_MQ_KNL_RX_V2P_MASK1 0x00003c34
+#define BNX2_MQ_KNL_WRITE_MASK2 0x00003c38
+#define BNX2_MQ_KNL_TX_MASK2 0x00003c3c
+#define BNX2_MQ_KNL_CMD_MASK2 0x00003c40
+#define BNX2_MQ_KNL_COND_ENQUEUE_MASK2 0x00003c44
+#define BNX2_MQ_KNL_RX_V2P_MASK2 0x00003c48
+#define BNX2_MQ_KNL_BYP_WRITE_MASK1 0x00003c4c
+#define BNX2_MQ_KNL_BYP_TX_MASK1 0x00003c50
+#define BNX2_MQ_KNL_BYP_CMD_MASK1 0x00003c54
+#define BNX2_MQ_KNL_BYP_COND_ENQUEUE_MASK1 0x00003c58
+#define BNX2_MQ_KNL_BYP_RX_V2P_MASK1 0x00003c5c
+#define BNX2_MQ_KNL_BYP_WRITE_MASK2 0x00003c60
+#define BNX2_MQ_KNL_BYP_TX_MASK2 0x00003c64
+#define BNX2_MQ_KNL_BYP_CMD_MASK2 0x00003c68
+#define BNX2_MQ_KNL_BYP_COND_ENQUEUE_MASK2 0x00003c6c
+#define BNX2_MQ_KNL_BYP_RX_V2P_MASK2 0x00003c70
+#define BNX2_MQ_MEM_WR_ADDR 0x00003c74
+#define BNX2_MQ_MEM_WR_ADDR_VALUE (0x3fL<<0)
+
+#define BNX2_MQ_MEM_WR_DATA0 0x00003c78
+#define BNX2_MQ_MEM_WR_DATA0_VALUE (0xffffffffL<<0)
+
+#define BNX2_MQ_MEM_WR_DATA1 0x00003c7c
+#define BNX2_MQ_MEM_WR_DATA1_VALUE (0xffffffffL<<0)
+
+#define BNX2_MQ_MEM_WR_DATA2 0x00003c80
+#define BNX2_MQ_MEM_WR_DATA2_VALUE (0x3fffffffL<<0)
+
+#define BNX2_MQ_MEM_RD_ADDR 0x00003c84
+#define BNX2_MQ_MEM_RD_ADDR_VALUE (0x3fL<<0)
+
+#define BNX2_MQ_MEM_RD_DATA0 0x00003c88
+#define BNX2_MQ_MEM_RD_DATA0_VALUE (0xffffffffL<<0)
+
+#define BNX2_MQ_MEM_RD_DATA1 0x00003c8c
+#define BNX2_MQ_MEM_RD_DATA1_VALUE (0xffffffffL<<0)
+
+#define BNX2_MQ_MEM_RD_DATA2 0x00003c90
+#define BNX2_MQ_MEM_RD_DATA2_VALUE (0x3fffffffL<<0)
+
+
+
+/*
+ * tbdr_reg definition
+ * offset: 0x5000
+ */
+#define BNX2_TBDR_COMMAND 0x00005000
+#define BNX2_TBDR_COMMAND_ENABLE (1L<<0)
+#define BNX2_TBDR_COMMAND_SOFT_RST (1L<<1)
+#define BNX2_TBDR_COMMAND_MSTR_ABORT (1L<<4)
+
+#define BNX2_TBDR_STATUS 0x00005004
+#define BNX2_TBDR_STATUS_DMA_WAIT (1L<<0)
+#define BNX2_TBDR_STATUS_FTQ_WAIT (1L<<1)
+#define BNX2_TBDR_STATUS_FIFO_OVERFLOW (1L<<2)
+#define BNX2_TBDR_STATUS_FIFO_UNDERFLOW (1L<<3)
+#define BNX2_TBDR_STATUS_SEARCHMISS_ERROR (1L<<4)
+#define BNX2_TBDR_STATUS_FTQ_ENTRY_CNT (1L<<5)
+#define BNX2_TBDR_STATUS_BURST_CNT (1L<<6)
+
+#define BNX2_TBDR_CONFIG 0x00005008
+#define BNX2_TBDR_CONFIG_MAX_BDS (0xffL<<0)
+#define BNX2_TBDR_CONFIG_SWAP_MODE (1L<<8)
+#define BNX2_TBDR_CONFIG_PRIORITY (1L<<9)
+#define BNX2_TBDR_CONFIG_CACHE_NEXT_PAGE_PTRS (1L<<10)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE (0xfL<<24)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE_256 (0L<<24)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE_512 (1L<<24)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE_1K (2L<<24)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE_2K (3L<<24)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE_4K (4L<<24)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE_8K (5L<<24)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE_16K (6L<<24)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE_32K (7L<<24)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE_64K (8L<<24)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE_128K (9L<<24)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE_256K (10L<<24)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE_512K (11L<<24)
+#define BNX2_TBDR_CONFIG_PAGE_SIZE_1M (12L<<24)
+
+#define BNX2_TBDR_DEBUG_VECT_PEEK 0x0000500c
+#define BNX2_TBDR_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0)
+#define BNX2_TBDR_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11)
+#define BNX2_TBDR_DEBUG_VECT_PEEK_1_SEL (0xfL<<12)
+#define BNX2_TBDR_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16)
+#define BNX2_TBDR_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27)
+#define BNX2_TBDR_DEBUG_VECT_PEEK_2_SEL (0xfL<<28)
+
+#define BNX2_TBDR_FTQ_DATA 0x000053c0
+#define BNX2_TBDR_FTQ_CMD 0x000053f8
+#define BNX2_TBDR_FTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_TBDR_FTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_TBDR_FTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_TBDR_FTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_TBDR_FTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_TBDR_FTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_TBDR_FTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_TBDR_FTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_TBDR_FTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_TBDR_FTQ_CMD_POP (1L<<30)
+#define BNX2_TBDR_FTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_TBDR_FTQ_CTL 0x000053fc
+#define BNX2_TBDR_FTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_TBDR_FTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_TBDR_FTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_TBDR_FTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_TBDR_FTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+
+
+/*
+ * tdma_reg definition
+ * offset: 0x5c00
+ */
+#define BNX2_TDMA_COMMAND 0x00005c00
+#define BNX2_TDMA_COMMAND_ENABLED (1L<<0)
+#define BNX2_TDMA_COMMAND_MASTER_ABORT (1L<<4)
+#define BNX2_TDMA_COMMAND_BAD_L2_LENGTH_ABORT (1L<<7)
+
+#define BNX2_TDMA_STATUS 0x00005c04
+#define BNX2_TDMA_STATUS_DMA_WAIT (1L<<0)
+#define BNX2_TDMA_STATUS_PAYLOAD_WAIT (1L<<1)
+#define BNX2_TDMA_STATUS_PATCH_FTQ_WAIT (1L<<2)
+#define BNX2_TDMA_STATUS_LOCK_WAIT (1L<<3)
+#define BNX2_TDMA_STATUS_FTQ_ENTRY_CNT (1L<<16)
+#define BNX2_TDMA_STATUS_BURST_CNT (1L<<17)
+
+#define BNX2_TDMA_CONFIG 0x00005c08
+#define BNX2_TDMA_CONFIG_ONE_DMA (1L<<0)
+#define BNX2_TDMA_CONFIG_ONE_RECORD (1L<<1)
+#define BNX2_TDMA_CONFIG_LIMIT_SZ (0xfL<<4)
+#define BNX2_TDMA_CONFIG_LIMIT_SZ_64 (0L<<4)
+#define BNX2_TDMA_CONFIG_LIMIT_SZ_128 (0x4L<<4)
+#define BNX2_TDMA_CONFIG_LIMIT_SZ_256 (0x6L<<4)
+#define BNX2_TDMA_CONFIG_LIMIT_SZ_512 (0x8L<<4)
+#define BNX2_TDMA_CONFIG_LINE_SZ (0xfL<<8)
+#define BNX2_TDMA_CONFIG_LINE_SZ_64 (0L<<8)
+#define BNX2_TDMA_CONFIG_LINE_SZ_128 (4L<<8)
+#define BNX2_TDMA_CONFIG_LINE_SZ_256 (6L<<8)
+#define BNX2_TDMA_CONFIG_LINE_SZ_512 (8L<<8)
+#define BNX2_TDMA_CONFIG_ALIGN_ENA (1L<<15)
+#define BNX2_TDMA_CONFIG_CHK_L2_BD (1L<<16)
+#define BNX2_TDMA_CONFIG_FIFO_CMP (0xfL<<20)
+
+#define BNX2_TDMA_PAYLOAD_PROD 0x00005c0c
+#define BNX2_TDMA_PAYLOAD_PROD_VALUE (0x1fffL<<3)
+
+#define BNX2_TDMA_DBG_WATCHDOG 0x00005c10
+#define BNX2_TDMA_DBG_TRIGGER 0x00005c14
+#define BNX2_TDMA_DMAD_FSM 0x00005c80
+#define BNX2_TDMA_DMAD_FSM_BD_INVLD (1L<<0)
+#define BNX2_TDMA_DMAD_FSM_PUSH (0xfL<<4)
+#define BNX2_TDMA_DMAD_FSM_ARB_TBDC (0x3L<<8)
+#define BNX2_TDMA_DMAD_FSM_ARB_CTX (1L<<12)
+#define BNX2_TDMA_DMAD_FSM_DR_INTF (1L<<16)
+#define BNX2_TDMA_DMAD_FSM_DMAD (0x7L<<20)
+#define BNX2_TDMA_DMAD_FSM_BD (0xfL<<24)
+
+#define BNX2_TDMA_DMAD_STATUS 0x00005c84
+#define BNX2_TDMA_DMAD_STATUS_RHOLD_PUSH_ENTRY (0x3L<<0)
+#define BNX2_TDMA_DMAD_STATUS_RHOLD_DMAD_ENTRY (0x3L<<4)
+#define BNX2_TDMA_DMAD_STATUS_RHOLD_BD_ENTRY (0x3L<<8)
+#define BNX2_TDMA_DMAD_STATUS_IFTQ_ENUM (0xfL<<12)
+
+#define BNX2_TDMA_DR_INTF_FSM 0x00005c88
+#define BNX2_TDMA_DR_INTF_FSM_L2_COMP (0x3L<<0)
+#define BNX2_TDMA_DR_INTF_FSM_TPATQ (0x7L<<4)
+#define BNX2_TDMA_DR_INTF_FSM_TPBUF (0x3L<<8)
+#define BNX2_TDMA_DR_INTF_FSM_DR_BUF (0x7L<<12)
+#define BNX2_TDMA_DR_INTF_FSM_DMAD (0x7L<<16)
+
+#define BNX2_TDMA_DR_INTF_STATUS 0x00005c8c
+#define BNX2_TDMA_DR_INTF_STATUS_HOLE_PHASE (0x7L<<0)
+#define BNX2_TDMA_DR_INTF_STATUS_DATA_AVAIL (0x3L<<4)
+#define BNX2_TDMA_DR_INTF_STATUS_SHIFT_ADDR (0x7L<<8)
+#define BNX2_TDMA_DR_INTF_STATUS_NXT_PNTR (0xfL<<12)
+#define BNX2_TDMA_DR_INTF_STATUS_BYTE_COUNT (0x7L<<16)
+
+#define BNX2_TDMA_FTQ_DATA 0x00005fc0
+#define BNX2_TDMA_FTQ_CMD 0x00005ff8
+#define BNX2_TDMA_FTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_TDMA_FTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_TDMA_FTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_TDMA_FTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_TDMA_FTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_TDMA_FTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_TDMA_FTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_TDMA_FTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_TDMA_FTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_TDMA_FTQ_CMD_POP (1L<<30)
+#define BNX2_TDMA_FTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_TDMA_FTQ_CTL 0x00005ffc
+#define BNX2_TDMA_FTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_TDMA_FTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_TDMA_FTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_TDMA_FTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_TDMA_FTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+
+
+/*
+ * hc_reg definition
+ * offset: 0x6800
+ */
+#define BNX2_HC_COMMAND 0x00006800
+#define BNX2_HC_COMMAND_ENABLE (1L<<0)
+#define BNX2_HC_COMMAND_SKIP_ABORT (1L<<4)
+#define BNX2_HC_COMMAND_COAL_NOW (1L<<16)
+#define BNX2_HC_COMMAND_COAL_NOW_WO_INT (1L<<17)
+#define BNX2_HC_COMMAND_STATS_NOW (1L<<18)
+#define BNX2_HC_COMMAND_FORCE_INT (0x3L<<19)
+#define BNX2_HC_COMMAND_FORCE_INT_NULL (0L<<19)
+#define BNX2_HC_COMMAND_FORCE_INT_HIGH (1L<<19)
+#define BNX2_HC_COMMAND_FORCE_INT_LOW (2L<<19)
+#define BNX2_HC_COMMAND_FORCE_INT_FREE (3L<<19)
+#define BNX2_HC_COMMAND_CLR_STAT_NOW (1L<<21)
+
+#define BNX2_HC_STATUS 0x00006804
+#define BNX2_HC_STATUS_MASTER_ABORT (1L<<0)
+#define BNX2_HC_STATUS_PARITY_ERROR_STATE (1L<<1)
+#define BNX2_HC_STATUS_PCI_CLK_CNT_STAT (1L<<16)
+#define BNX2_HC_STATUS_CORE_CLK_CNT_STAT (1L<<17)
+#define BNX2_HC_STATUS_NUM_STATUS_BLOCKS_STAT (1L<<18)
+#define BNX2_HC_STATUS_NUM_INT_GEN_STAT (1L<<19)
+#define BNX2_HC_STATUS_NUM_INT_MBOX_WR_STAT (1L<<20)
+#define BNX2_HC_STATUS_CORE_CLKS_TO_HW_INTACK_STAT (1L<<23)
+#define BNX2_HC_STATUS_CORE_CLKS_TO_SW_INTACK_STAT (1L<<24)
+#define BNX2_HC_STATUS_CORE_CLKS_DURING_SW_INTACK_STAT (1L<<25)
+
+#define BNX2_HC_CONFIG 0x00006808
+#define BNX2_HC_CONFIG_COLLECT_STATS (1L<<0)
+#define BNX2_HC_CONFIG_RX_TMR_MODE (1L<<1)
+#define BNX2_HC_CONFIG_TX_TMR_MODE (1L<<2)
+#define BNX2_HC_CONFIG_COM_TMR_MODE (1L<<3)
+#define BNX2_HC_CONFIG_CMD_TMR_MODE (1L<<4)
+#define BNX2_HC_CONFIG_STATISTIC_PRIORITY (1L<<5)
+#define BNX2_HC_CONFIG_STATUS_PRIORITY (1L<<6)
+#define BNX2_HC_CONFIG_STAT_MEM_ADDR (0xffL<<8)
+
+#define BNX2_HC_ATTN_BITS_ENABLE 0x0000680c
+#define BNX2_HC_STATUS_ADDR_L 0x00006810
+#define BNX2_HC_STATUS_ADDR_H 0x00006814
+#define BNX2_HC_STATISTICS_ADDR_L 0x00006818
+#define BNX2_HC_STATISTICS_ADDR_H 0x0000681c
+#define BNX2_HC_TX_QUICK_CONS_TRIP 0x00006820
+#define BNX2_HC_TX_QUICK_CONS_TRIP_VALUE (0xffL<<0)
+#define BNX2_HC_TX_QUICK_CONS_TRIP_INT (0xffL<<16)
+
+#define BNX2_HC_COMP_PROD_TRIP 0x00006824
+#define BNX2_HC_COMP_PROD_TRIP_VALUE (0xffL<<0)
+#define BNX2_HC_COMP_PROD_TRIP_INT (0xffL<<16)
+
+#define BNX2_HC_RX_QUICK_CONS_TRIP 0x00006828
+#define BNX2_HC_RX_QUICK_CONS_TRIP_VALUE (0xffL<<0)
+#define BNX2_HC_RX_QUICK_CONS_TRIP_INT (0xffL<<16)
+
+#define BNX2_HC_RX_TICKS 0x0000682c
+#define BNX2_HC_RX_TICKS_VALUE (0x3ffL<<0)
+#define BNX2_HC_RX_TICKS_INT (0x3ffL<<16)
+
+#define BNX2_HC_TX_TICKS 0x00006830
+#define BNX2_HC_TX_TICKS_VALUE (0x3ffL<<0)
+#define BNX2_HC_TX_TICKS_INT (0x3ffL<<16)
+
+#define BNX2_HC_COM_TICKS 0x00006834
+#define BNX2_HC_COM_TICKS_VALUE (0x3ffL<<0)
+#define BNX2_HC_COM_TICKS_INT (0x3ffL<<16)
+
+#define BNX2_HC_CMD_TICKS 0x00006838
+#define BNX2_HC_CMD_TICKS_VALUE (0x3ffL<<0)
+#define BNX2_HC_CMD_TICKS_INT (0x3ffL<<16)
+
+#define BNX2_HC_PERIODIC_TICKS 0x0000683c
+#define BNX2_HC_PERIODIC_TICKS_HC_PERIODIC_TICKS (0xffffL<<0)
+
+#define BNX2_HC_STAT_COLLECT_TICKS 0x00006840
+#define BNX2_HC_STAT_COLLECT_TICKS_HC_STAT_COLL_TICKS (0xffL<<4)
+
+#define BNX2_HC_STATS_TICKS 0x00006844
+#define BNX2_HC_STATS_TICKS_HC_STAT_TICKS (0xffffL<<8)
+
+#define BNX2_HC_STAT_MEM_DATA 0x0000684c
+#define BNX2_HC_STAT_GEN_SEL_0 0x00006850
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0 (0x7fL<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT0 (0L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT1 (1L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT2 (2L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT3 (3L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT4 (4L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT5 (5L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT6 (6L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT7 (7L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT8 (8L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT9 (9L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT10 (10L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT11 (11L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT0 (12L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT1 (13L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT2 (14L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT3 (15L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT4 (16L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT5 (17L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT6 (18L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT7 (19L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT0 (20L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT1 (21L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT2 (22L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT3 (23L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT4 (24L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT5 (25L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT6 (26L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT7 (27L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT8 (28L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT9 (29L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT10 (30L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT11 (31L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT0 (32L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT1 (33L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT2 (34L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT3 (35L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT0 (36L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT1 (37L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT2 (38L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT3 (39L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT4 (40L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT5 (41L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT6 (42L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT7 (43L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT0 (44L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT1 (45L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT2 (46L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT3 (47L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT4 (48L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT5 (49L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT6 (50L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT7 (51L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_PCI_CLK_CNT (52L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CORE_CLK_CNT (53L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_STATUS_BLOCKS (54L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_GEN (55L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_MBOX_WR (56L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_HW_INTACK (59L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_SW_INTACK (60L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_DURING_SW_INTACK (61L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCH_CMD_CNT (62L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCH_SLOT_CNT (63L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSCH_CMD_CNT (64L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSCH_SLOT_CNT (65L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RLUPQ_VALID_CNT (66L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXPQ_VALID_CNT (67L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXPCQ_VALID_CNT (68L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PPQ_VALID_CNT (69L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PMQ_VALID_CNT (70L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PTQ_VALID_CNT (71L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMAQ_VALID_CNT (72L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCHQ_VALID_CNT (73L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDRQ_VALID_CNT (74L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXPQ_VALID_CNT (75L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMAQ_VALID_CNT (76L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPATQ_VALID_CNT (77L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TASQ_VALID_CNT (78L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSQ_VALID_CNT (79L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CPQ_VALID_CNT (80L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMXQ_VALID_CNT (81L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMTQ_VALID_CNT (82L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMQ_VALID_CNT (83L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MGMQ_VALID_CNT (84L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_READ_TRANSFERS_CNT (85L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_READ_DELAY_PCI_CLKS_CNT (86L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_READ_TRANSFERS_CNT (87L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_READ_DELAY_PCI_CLKS_CNT (88L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_READ_RETRY_AFTER_DATA_CNT (89L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_WRITE_TRANSFERS_CNT (90L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_WRITE_DELAY_PCI_CLKS_CNT (91L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_WRITE_TRANSFERS_CNT (92L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_WRITE_DELAY_PCI_CLKS_CNT (93L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_WRITE_RETRY_AFTER_DATA_CNT (94L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_WR_CNT64 (95L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_RD_CNT64 (96L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_ACC_STALL_CLKS (97L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_LOCK_STALL_CLKS (98L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MBQ_CTX_ACCESS_STAT (99L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MBQ_CTX_ACCESS64_STAT (100L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MBQ_PCI_STALL_STAT (101L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDR_FTQ_ENTRY_CNT (102L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDR_BURST_CNT (103L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMA_FTQ_ENTRY_CNT (104L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMA_BURST_CNT (105L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMA_FTQ_ENTRY_CNT (106L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMA_BURST_CNT (107L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RLUP_MATCH_CNT (108L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_POLL_PASS_CNT (109L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR1_CNT (110L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR2_CNT (111L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR3_CNT (112L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR4_CNT (113L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR5_CNT (114L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT0 (115L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT1 (116L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT2 (117L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT3 (118L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT4 (119L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT5 (120L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RBDC_PROC1_MISS (121L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RBDC_PROC2_MISS (122L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RBDC_BURST_CNT (127L<<0)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_1 (0x7fL<<8)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_2 (0x7fL<<16)
+#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_3 (0x7fL<<24)
+
+#define BNX2_HC_STAT_GEN_SEL_1 0x00006854
+#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_4 (0x7fL<<0)
+#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_5 (0x7fL<<8)
+#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_6 (0x7fL<<16)
+#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_7 (0x7fL<<24)
+
+#define BNX2_HC_STAT_GEN_SEL_2 0x00006858
+#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_8 (0x7fL<<0)
+#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_9 (0x7fL<<8)
+#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_10 (0x7fL<<16)
+#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_11 (0x7fL<<24)
+
+#define BNX2_HC_STAT_GEN_SEL_3 0x0000685c
+#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_12 (0x7fL<<0)
+#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_13 (0x7fL<<8)
+#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_14 (0x7fL<<16)
+#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_15 (0x7fL<<24)
+
+#define BNX2_HC_STAT_GEN_STAT0 0x00006888
+#define BNX2_HC_STAT_GEN_STAT1 0x0000688c
+#define BNX2_HC_STAT_GEN_STAT2 0x00006890
+#define BNX2_HC_STAT_GEN_STAT3 0x00006894
+#define BNX2_HC_STAT_GEN_STAT4 0x00006898
+#define BNX2_HC_STAT_GEN_STAT5 0x0000689c
+#define BNX2_HC_STAT_GEN_STAT6 0x000068a0
+#define BNX2_HC_STAT_GEN_STAT7 0x000068a4
+#define BNX2_HC_STAT_GEN_STAT8 0x000068a8
+#define BNX2_HC_STAT_GEN_STAT9 0x000068ac
+#define BNX2_HC_STAT_GEN_STAT10 0x000068b0
+#define BNX2_HC_STAT_GEN_STAT11 0x000068b4
+#define BNX2_HC_STAT_GEN_STAT12 0x000068b8
+#define BNX2_HC_STAT_GEN_STAT13 0x000068bc
+#define BNX2_HC_STAT_GEN_STAT14 0x000068c0
+#define BNX2_HC_STAT_GEN_STAT15 0x000068c4
+#define BNX2_HC_STAT_GEN_STAT_AC0 0x000068c8
+#define BNX2_HC_STAT_GEN_STAT_AC1 0x000068cc
+#define BNX2_HC_STAT_GEN_STAT_AC2 0x000068d0
+#define BNX2_HC_STAT_GEN_STAT_AC3 0x000068d4
+#define BNX2_HC_STAT_GEN_STAT_AC4 0x000068d8
+#define BNX2_HC_STAT_GEN_STAT_AC5 0x000068dc
+#define BNX2_HC_STAT_GEN_STAT_AC6 0x000068e0
+#define BNX2_HC_STAT_GEN_STAT_AC7 0x000068e4
+#define BNX2_HC_STAT_GEN_STAT_AC8 0x000068e8
+#define BNX2_HC_STAT_GEN_STAT_AC9 0x000068ec
+#define BNX2_HC_STAT_GEN_STAT_AC10 0x000068f0
+#define BNX2_HC_STAT_GEN_STAT_AC11 0x000068f4
+#define BNX2_HC_STAT_GEN_STAT_AC12 0x000068f8
+#define BNX2_HC_STAT_GEN_STAT_AC13 0x000068fc
+#define BNX2_HC_STAT_GEN_STAT_AC14 0x00006900
+#define BNX2_HC_STAT_GEN_STAT_AC15 0x00006904
+#define BNX2_HC_VIS 0x00006908
+#define BNX2_HC_VIS_STAT_BUILD_STATE (0xfL<<0)
+#define BNX2_HC_VIS_STAT_BUILD_STATE_IDLE (0L<<0)
+#define BNX2_HC_VIS_STAT_BUILD_STATE_START (1L<<0)
+#define BNX2_HC_VIS_STAT_BUILD_STATE_REQUEST (2L<<0)
+#define BNX2_HC_VIS_STAT_BUILD_STATE_UPDATE64 (3L<<0)
+#define BNX2_HC_VIS_STAT_BUILD_STATE_UPDATE32 (4L<<0)
+#define BNX2_HC_VIS_STAT_BUILD_STATE_UPDATE_DONE (5L<<0)
+#define BNX2_HC_VIS_STAT_BUILD_STATE_DMA (6L<<0)
+#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_CONTROL (7L<<0)
+#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_LOW (8L<<0)
+#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_HIGH (9L<<0)
+#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_DATA (10L<<0)
+#define BNX2_HC_VIS_DMA_STAT_STATE (0xfL<<8)
+#define BNX2_HC_VIS_DMA_STAT_STATE_IDLE (0L<<8)
+#define BNX2_HC_VIS_DMA_STAT_STATE_STATUS_PARAM (1L<<8)
+#define BNX2_HC_VIS_DMA_STAT_STATE_STATUS_DMA (2L<<8)
+#define BNX2_HC_VIS_DMA_STAT_STATE_WRITE_COMP (3L<<8)
+#define BNX2_HC_VIS_DMA_STAT_STATE_COMP (4L<<8)
+#define BNX2_HC_VIS_DMA_STAT_STATE_STATISTIC_PARAM (5L<<8)
+#define BNX2_HC_VIS_DMA_STAT_STATE_STATISTIC_DMA (6L<<8)
+#define BNX2_HC_VIS_DMA_STAT_STATE_WRITE_COMP_1 (7L<<8)
+#define BNX2_HC_VIS_DMA_STAT_STATE_WRITE_COMP_2 (8L<<8)
+#define BNX2_HC_VIS_DMA_STAT_STATE_WAIT (9L<<8)
+#define BNX2_HC_VIS_DMA_STAT_STATE_ABORT (15L<<8)
+#define BNX2_HC_VIS_DMA_MSI_STATE (0x7L<<12)
+#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE (0x3L<<15)
+#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE_IDLE (0L<<15)
+#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE_COUNT (1L<<15)
+#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE_START (2L<<15)
+
+#define BNX2_HC_VIS_1 0x0000690c
+#define BNX2_HC_VIS_1_HW_INTACK_STATE (1L<<4)
+#define BNX2_HC_VIS_1_HW_INTACK_STATE_IDLE (0L<<4)
+#define BNX2_HC_VIS_1_HW_INTACK_STATE_COUNT (1L<<4)
+#define BNX2_HC_VIS_1_SW_INTACK_STATE (1L<<5)
+#define BNX2_HC_VIS_1_SW_INTACK_STATE_IDLE (0L<<5)
+#define BNX2_HC_VIS_1_SW_INTACK_STATE_COUNT (1L<<5)
+#define BNX2_HC_VIS_1_DURING_SW_INTACK_STATE (1L<<6)
+#define BNX2_HC_VIS_1_DURING_SW_INTACK_STATE_IDLE (0L<<6)
+#define BNX2_HC_VIS_1_DURING_SW_INTACK_STATE_COUNT (1L<<6)
+#define BNX2_HC_VIS_1_MAILBOX_COUNT_STATE (1L<<7)
+#define BNX2_HC_VIS_1_MAILBOX_COUNT_STATE_IDLE (0L<<7)
+#define BNX2_HC_VIS_1_MAILBOX_COUNT_STATE_COUNT (1L<<7)
+#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE (0xfL<<17)
+#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_IDLE (0L<<17)
+#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_DMA (1L<<17)
+#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_UPDATE (2L<<17)
+#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_ASSIGN (3L<<17)
+#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_WAIT (4L<<17)
+#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_REG_UPDATE (5L<<17)
+#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_REG_ASSIGN (6L<<17)
+#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_REG_WAIT (7L<<17)
+#define BNX2_HC_VIS_1_RAM_WR_ARB_STATE (0x3L<<21)
+#define BNX2_HC_VIS_1_RAM_WR_ARB_STATE_NORMAL (0L<<21)
+#define BNX2_HC_VIS_1_RAM_WR_ARB_STATE_CLEAR (1L<<21)
+#define BNX2_HC_VIS_1_INT_GEN_STATE (1L<<23)
+#define BNX2_HC_VIS_1_INT_GEN_STATE_DLE (0L<<23)
+#define BNX2_HC_VIS_1_INT_GEN_STATE_NTERRUPT (1L<<23)
+#define BNX2_HC_VIS_1_STAT_CHAN_ID (0x7L<<24)
+#define BNX2_HC_VIS_1_INT_B (1L<<27)
+
+#define BNX2_HC_DEBUG_VECT_PEEK 0x00006910
+#define BNX2_HC_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0)
+#define BNX2_HC_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11)
+#define BNX2_HC_DEBUG_VECT_PEEK_1_SEL (0xfL<<12)
+#define BNX2_HC_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16)
+#define BNX2_HC_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27)
+#define BNX2_HC_DEBUG_VECT_PEEK_2_SEL (0xfL<<28)
+
+
+
+/*
+ * txp_reg definition
+ * offset: 0x40000
+ */
+#define BNX2_TXP_CPU_MODE 0x00045000
+#define BNX2_TXP_CPU_MODE_LOCAL_RST (1L<<0)
+#define BNX2_TXP_CPU_MODE_STEP_ENA (1L<<1)
+#define BNX2_TXP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2)
+#define BNX2_TXP_CPU_MODE_PAGE_0_INST_ENA (1L<<3)
+#define BNX2_TXP_CPU_MODE_MSG_BIT1 (1L<<6)
+#define BNX2_TXP_CPU_MODE_INTERRUPT_ENA (1L<<7)
+#define BNX2_TXP_CPU_MODE_SOFT_HALT (1L<<10)
+#define BNX2_TXP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11)
+#define BNX2_TXP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12)
+#define BNX2_TXP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13)
+#define BNX2_TXP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15)
+
+#define BNX2_TXP_CPU_STATE 0x00045004
+#define BNX2_TXP_CPU_STATE_BREAKPOINT (1L<<0)
+#define BNX2_TXP_CPU_STATE_BAD_INST_HALTED (1L<<2)
+#define BNX2_TXP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3)
+#define BNX2_TXP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4)
+#define BNX2_TXP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5)
+#define BNX2_TXP_CPU_STATE_BAD_pc_HALTED (1L<<6)
+#define BNX2_TXP_CPU_STATE_ALIGN_HALTED (1L<<7)
+#define BNX2_TXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
+#define BNX2_TXP_CPU_STATE_SOFT_HALTED (1L<<10)
+#define BNX2_TXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
+#define BNX2_TXP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_TXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
+#define BNX2_TXP_CPU_STATE_INST_FETCH_STALL (1L<<15)
+#define BNX2_TXP_CPU_STATE_BLOCKED_READ (1L<<31)
+
+#define BNX2_TXP_CPU_EVENT_MASK 0x00045008
+#define BNX2_TXP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0)
+#define BNX2_TXP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2)
+#define BNX2_TXP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3)
+#define BNX2_TXP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4)
+#define BNX2_TXP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5)
+#define BNX2_TXP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6)
+#define BNX2_TXP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7)
+#define BNX2_TXP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8)
+#define BNX2_TXP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10)
+#define BNX2_TXP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11)
+#define BNX2_TXP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12)
+
+#define BNX2_TXP_CPU_PROGRAM_COUNTER 0x0004501c
+#define BNX2_TXP_CPU_INSTRUCTION 0x00045020
+#define BNX2_TXP_CPU_DATA_ACCESS 0x00045024
+#define BNX2_TXP_CPU_INTERRUPT_ENABLE 0x00045028
+#define BNX2_TXP_CPU_INTERRUPT_VECTOR 0x0004502c
+#define BNX2_TXP_CPU_INTERRUPT_SAVED_PC 0x00045030
+#define BNX2_TXP_CPU_HW_BREAKPOINT 0x00045034
+#define BNX2_TXP_CPU_HW_BREAKPOINT_DISABLE (1L<<0)
+#define BNX2_TXP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2)
+
+#define BNX2_TXP_CPU_DEBUG_VECT_PEEK 0x00045038
+#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0)
+#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11)
+#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12)
+#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16)
+#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27)
+#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28)
+
+#define BNX2_TXP_CPU_LAST_BRANCH_ADDR 0x00045048
+#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1)
+#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1)
+#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1)
+#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2)
+
+#define BNX2_TXP_CPU_REG_FILE 0x00045200
+#define BNX2_TXP_FTQ_DATA 0x000453c0
+#define BNX2_TXP_FTQ_CMD 0x000453f8
+#define BNX2_TXP_FTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_TXP_FTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_TXP_FTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_TXP_FTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_TXP_FTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_TXP_FTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_TXP_FTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_TXP_FTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_TXP_FTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_TXP_FTQ_CMD_POP (1L<<30)
+#define BNX2_TXP_FTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_TXP_FTQ_CTL 0x000453fc
+#define BNX2_TXP_FTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_TXP_FTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_TXP_FTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_TXP_FTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_TXP_FTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+#define BNX2_TXP_SCRATCH 0x00060000
+
+
+/*
+ * tpat_reg definition
+ * offset: 0x80000
+ */
+#define BNX2_TPAT_CPU_MODE 0x00085000
+#define BNX2_TPAT_CPU_MODE_LOCAL_RST (1L<<0)
+#define BNX2_TPAT_CPU_MODE_STEP_ENA (1L<<1)
+#define BNX2_TPAT_CPU_MODE_PAGE_0_DATA_ENA (1L<<2)
+#define BNX2_TPAT_CPU_MODE_PAGE_0_INST_ENA (1L<<3)
+#define BNX2_TPAT_CPU_MODE_MSG_BIT1 (1L<<6)
+#define BNX2_TPAT_CPU_MODE_INTERRUPT_ENA (1L<<7)
+#define BNX2_TPAT_CPU_MODE_SOFT_HALT (1L<<10)
+#define BNX2_TPAT_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11)
+#define BNX2_TPAT_CPU_MODE_BAD_INST_HALT_ENA (1L<<12)
+#define BNX2_TPAT_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13)
+#define BNX2_TPAT_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15)
+
+#define BNX2_TPAT_CPU_STATE 0x00085004
+#define BNX2_TPAT_CPU_STATE_BREAKPOINT (1L<<0)
+#define BNX2_TPAT_CPU_STATE_BAD_INST_HALTED (1L<<2)
+#define BNX2_TPAT_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3)
+#define BNX2_TPAT_CPU_STATE_PAGE_0_INST_HALTED (1L<<4)
+#define BNX2_TPAT_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5)
+#define BNX2_TPAT_CPU_STATE_BAD_pc_HALTED (1L<<6)
+#define BNX2_TPAT_CPU_STATE_ALIGN_HALTED (1L<<7)
+#define BNX2_TPAT_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
+#define BNX2_TPAT_CPU_STATE_SOFT_HALTED (1L<<10)
+#define BNX2_TPAT_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
+#define BNX2_TPAT_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_TPAT_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
+#define BNX2_TPAT_CPU_STATE_INST_FETCH_STALL (1L<<15)
+#define BNX2_TPAT_CPU_STATE_BLOCKED_READ (1L<<31)
+
+#define BNX2_TPAT_CPU_EVENT_MASK 0x00085008
+#define BNX2_TPAT_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0)
+#define BNX2_TPAT_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2)
+#define BNX2_TPAT_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3)
+#define BNX2_TPAT_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4)
+#define BNX2_TPAT_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5)
+#define BNX2_TPAT_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6)
+#define BNX2_TPAT_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7)
+#define BNX2_TPAT_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8)
+#define BNX2_TPAT_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10)
+#define BNX2_TPAT_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11)
+#define BNX2_TPAT_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12)
+
+#define BNX2_TPAT_CPU_PROGRAM_COUNTER 0x0008501c
+#define BNX2_TPAT_CPU_INSTRUCTION 0x00085020
+#define BNX2_TPAT_CPU_DATA_ACCESS 0x00085024
+#define BNX2_TPAT_CPU_INTERRUPT_ENABLE 0x00085028
+#define BNX2_TPAT_CPU_INTERRUPT_VECTOR 0x0008502c
+#define BNX2_TPAT_CPU_INTERRUPT_SAVED_PC 0x00085030
+#define BNX2_TPAT_CPU_HW_BREAKPOINT 0x00085034
+#define BNX2_TPAT_CPU_HW_BREAKPOINT_DISABLE (1L<<0)
+#define BNX2_TPAT_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2)
+
+#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK 0x00085038
+#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0)
+#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11)
+#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12)
+#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16)
+#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27)
+#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28)
+
+#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR 0x00085048
+#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1)
+#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1)
+#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1)
+#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2)
+
+#define BNX2_TPAT_CPU_REG_FILE 0x00085200
+#define BNX2_TPAT_FTQ_DATA 0x000853c0
+#define BNX2_TPAT_FTQ_CMD 0x000853f8
+#define BNX2_TPAT_FTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_TPAT_FTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_TPAT_FTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_TPAT_FTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_TPAT_FTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_TPAT_FTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_TPAT_FTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_TPAT_FTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_TPAT_FTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_TPAT_FTQ_CMD_POP (1L<<30)
+#define BNX2_TPAT_FTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_TPAT_FTQ_CTL 0x000853fc
+#define BNX2_TPAT_FTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_TPAT_FTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_TPAT_FTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_TPAT_FTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_TPAT_FTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+#define BNX2_TPAT_SCRATCH 0x000a0000
+
+
+/*
+ * rxp_reg definition
+ * offset: 0xc0000
+ */
+#define BNX2_RXP_CPU_MODE 0x000c5000
+#define BNX2_RXP_CPU_MODE_LOCAL_RST (1L<<0)
+#define BNX2_RXP_CPU_MODE_STEP_ENA (1L<<1)
+#define BNX2_RXP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2)
+#define BNX2_RXP_CPU_MODE_PAGE_0_INST_ENA (1L<<3)
+#define BNX2_RXP_CPU_MODE_MSG_BIT1 (1L<<6)
+#define BNX2_RXP_CPU_MODE_INTERRUPT_ENA (1L<<7)
+#define BNX2_RXP_CPU_MODE_SOFT_HALT (1L<<10)
+#define BNX2_RXP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11)
+#define BNX2_RXP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12)
+#define BNX2_RXP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13)
+#define BNX2_RXP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15)
+
+#define BNX2_RXP_CPU_STATE 0x000c5004
+#define BNX2_RXP_CPU_STATE_BREAKPOINT (1L<<0)
+#define BNX2_RXP_CPU_STATE_BAD_INST_HALTED (1L<<2)
+#define BNX2_RXP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3)
+#define BNX2_RXP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4)
+#define BNX2_RXP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5)
+#define BNX2_RXP_CPU_STATE_BAD_pc_HALTED (1L<<6)
+#define BNX2_RXP_CPU_STATE_ALIGN_HALTED (1L<<7)
+#define BNX2_RXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
+#define BNX2_RXP_CPU_STATE_SOFT_HALTED (1L<<10)
+#define BNX2_RXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
+#define BNX2_RXP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_RXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
+#define BNX2_RXP_CPU_STATE_INST_FETCH_STALL (1L<<15)
+#define BNX2_RXP_CPU_STATE_BLOCKED_READ (1L<<31)
+
+#define BNX2_RXP_CPU_EVENT_MASK 0x000c5008
+#define BNX2_RXP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0)
+#define BNX2_RXP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2)
+#define BNX2_RXP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3)
+#define BNX2_RXP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4)
+#define BNX2_RXP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5)
+#define BNX2_RXP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6)
+#define BNX2_RXP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7)
+#define BNX2_RXP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8)
+#define BNX2_RXP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10)
+#define BNX2_RXP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11)
+#define BNX2_RXP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12)
+
+#define BNX2_RXP_CPU_PROGRAM_COUNTER 0x000c501c
+#define BNX2_RXP_CPU_INSTRUCTION 0x000c5020
+#define BNX2_RXP_CPU_DATA_ACCESS 0x000c5024
+#define BNX2_RXP_CPU_INTERRUPT_ENABLE 0x000c5028
+#define BNX2_RXP_CPU_INTERRUPT_VECTOR 0x000c502c
+#define BNX2_RXP_CPU_INTERRUPT_SAVED_PC 0x000c5030
+#define BNX2_RXP_CPU_HW_BREAKPOINT 0x000c5034
+#define BNX2_RXP_CPU_HW_BREAKPOINT_DISABLE (1L<<0)
+#define BNX2_RXP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2)
+
+#define BNX2_RXP_CPU_DEBUG_VECT_PEEK 0x000c5038
+#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0)
+#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11)
+#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12)
+#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16)
+#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27)
+#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28)
+
+#define BNX2_RXP_CPU_LAST_BRANCH_ADDR 0x000c5048
+#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1)
+#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1)
+#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1)
+#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2)
+
+#define BNX2_RXP_CPU_REG_FILE 0x000c5200
+#define BNX2_RXP_CFTQ_DATA 0x000c5380
+#define BNX2_RXP_CFTQ_CMD 0x000c53b8
+#define BNX2_RXP_CFTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_RXP_CFTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_RXP_CFTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_RXP_CFTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_RXP_CFTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_RXP_CFTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_RXP_CFTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_RXP_CFTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_RXP_CFTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_RXP_CFTQ_CMD_POP (1L<<30)
+#define BNX2_RXP_CFTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_RXP_CFTQ_CTL 0x000c53bc
+#define BNX2_RXP_CFTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_RXP_CFTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_RXP_CFTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_RXP_CFTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_RXP_CFTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+#define BNX2_RXP_FTQ_DATA 0x000c53c0
+#define BNX2_RXP_FTQ_CMD 0x000c53f8
+#define BNX2_RXP_FTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_RXP_FTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_RXP_FTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_RXP_FTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_RXP_FTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_RXP_FTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_RXP_FTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_RXP_FTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_RXP_FTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_RXP_FTQ_CMD_POP (1L<<30)
+#define BNX2_RXP_FTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_RXP_FTQ_CTL 0x000c53fc
+#define BNX2_RXP_FTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_RXP_FTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_RXP_FTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_RXP_FTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_RXP_FTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+#define BNX2_RXP_SCRATCH 0x000e0000
+
+
+/*
+ * com_reg definition
+ * offset: 0x100000
+ */
+#define BNX2_COM_CPU_MODE 0x00105000
+#define BNX2_COM_CPU_MODE_LOCAL_RST (1L<<0)
+#define BNX2_COM_CPU_MODE_STEP_ENA (1L<<1)
+#define BNX2_COM_CPU_MODE_PAGE_0_DATA_ENA (1L<<2)
+#define BNX2_COM_CPU_MODE_PAGE_0_INST_ENA (1L<<3)
+#define BNX2_COM_CPU_MODE_MSG_BIT1 (1L<<6)
+#define BNX2_COM_CPU_MODE_INTERRUPT_ENA (1L<<7)
+#define BNX2_COM_CPU_MODE_SOFT_HALT (1L<<10)
+#define BNX2_COM_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11)
+#define BNX2_COM_CPU_MODE_BAD_INST_HALT_ENA (1L<<12)
+#define BNX2_COM_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13)
+#define BNX2_COM_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15)
+
+#define BNX2_COM_CPU_STATE 0x00105004
+#define BNX2_COM_CPU_STATE_BREAKPOINT (1L<<0)
+#define BNX2_COM_CPU_STATE_BAD_INST_HALTED (1L<<2)
+#define BNX2_COM_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3)
+#define BNX2_COM_CPU_STATE_PAGE_0_INST_HALTED (1L<<4)
+#define BNX2_COM_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5)
+#define BNX2_COM_CPU_STATE_BAD_pc_HALTED (1L<<6)
+#define BNX2_COM_CPU_STATE_ALIGN_HALTED (1L<<7)
+#define BNX2_COM_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
+#define BNX2_COM_CPU_STATE_SOFT_HALTED (1L<<10)
+#define BNX2_COM_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
+#define BNX2_COM_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_COM_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
+#define BNX2_COM_CPU_STATE_INST_FETCH_STALL (1L<<15)
+#define BNX2_COM_CPU_STATE_BLOCKED_READ (1L<<31)
+
+#define BNX2_COM_CPU_EVENT_MASK 0x00105008
+#define BNX2_COM_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0)
+#define BNX2_COM_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2)
+#define BNX2_COM_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3)
+#define BNX2_COM_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4)
+#define BNX2_COM_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5)
+#define BNX2_COM_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6)
+#define BNX2_COM_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7)
+#define BNX2_COM_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8)
+#define BNX2_COM_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10)
+#define BNX2_COM_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11)
+#define BNX2_COM_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12)
+
+#define BNX2_COM_CPU_PROGRAM_COUNTER 0x0010501c
+#define BNX2_COM_CPU_INSTRUCTION 0x00105020
+#define BNX2_COM_CPU_DATA_ACCESS 0x00105024
+#define BNX2_COM_CPU_INTERRUPT_ENABLE 0x00105028
+#define BNX2_COM_CPU_INTERRUPT_VECTOR 0x0010502c
+#define BNX2_COM_CPU_INTERRUPT_SAVED_PC 0x00105030
+#define BNX2_COM_CPU_HW_BREAKPOINT 0x00105034
+#define BNX2_COM_CPU_HW_BREAKPOINT_DISABLE (1L<<0)
+#define BNX2_COM_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2)
+
+#define BNX2_COM_CPU_DEBUG_VECT_PEEK 0x00105038
+#define BNX2_COM_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0)
+#define BNX2_COM_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11)
+#define BNX2_COM_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12)
+#define BNX2_COM_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16)
+#define BNX2_COM_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27)
+#define BNX2_COM_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28)
+
+#define BNX2_COM_CPU_LAST_BRANCH_ADDR 0x00105048
+#define BNX2_COM_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1)
+#define BNX2_COM_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1)
+#define BNX2_COM_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1)
+#define BNX2_COM_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2)
+
+#define BNX2_COM_CPU_REG_FILE 0x00105200
+#define BNX2_COM_COMXQ_FTQ_DATA 0x00105340
+#define BNX2_COM_COMXQ_FTQ_CMD 0x00105378
+#define BNX2_COM_COMXQ_FTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_COM_COMXQ_FTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_COM_COMXQ_FTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_COM_COMXQ_FTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_COM_COMXQ_FTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_COM_COMXQ_FTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_COM_COMXQ_FTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_COM_COMXQ_FTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_COM_COMXQ_FTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_COM_COMXQ_FTQ_CMD_POP (1L<<30)
+#define BNX2_COM_COMXQ_FTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_COM_COMXQ_FTQ_CTL 0x0010537c
+#define BNX2_COM_COMXQ_FTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_COM_COMXQ_FTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_COM_COMXQ_FTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_COM_COMXQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_COM_COMXQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+#define BNX2_COM_COMTQ_FTQ_DATA 0x00105380
+#define BNX2_COM_COMTQ_FTQ_CMD 0x001053b8
+#define BNX2_COM_COMTQ_FTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_COM_COMTQ_FTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_COM_COMTQ_FTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_COM_COMTQ_FTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_COM_COMTQ_FTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_COM_COMTQ_FTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_COM_COMTQ_FTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_COM_COMTQ_FTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_COM_COMTQ_FTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_COM_COMTQ_FTQ_CMD_POP (1L<<30)
+#define BNX2_COM_COMTQ_FTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_COM_COMTQ_FTQ_CTL 0x001053bc
+#define BNX2_COM_COMTQ_FTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_COM_COMTQ_FTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_COM_COMTQ_FTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_COM_COMTQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_COM_COMTQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+#define BNX2_COM_COMQ_FTQ_DATA 0x001053c0
+#define BNX2_COM_COMQ_FTQ_CMD 0x001053f8
+#define BNX2_COM_COMQ_FTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_COM_COMQ_FTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_COM_COMQ_FTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_COM_COMQ_FTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_COM_COMQ_FTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_COM_COMQ_FTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_COM_COMQ_FTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_COM_COMQ_FTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_COM_COMQ_FTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_COM_COMQ_FTQ_CMD_POP (1L<<30)
+#define BNX2_COM_COMQ_FTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_COM_COMQ_FTQ_CTL 0x001053fc
+#define BNX2_COM_COMQ_FTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_COM_COMQ_FTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_COM_COMQ_FTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_COM_COMQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_COM_COMQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+#define BNX2_COM_SCRATCH 0x00120000
+
+
+/*
+ * cp_reg definition
+ * offset: 0x180000
+ */
+#define BNX2_CP_CPU_MODE 0x00185000
+#define BNX2_CP_CPU_MODE_LOCAL_RST (1L<<0)
+#define BNX2_CP_CPU_MODE_STEP_ENA (1L<<1)
+#define BNX2_CP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2)
+#define BNX2_CP_CPU_MODE_PAGE_0_INST_ENA (1L<<3)
+#define BNX2_CP_CPU_MODE_MSG_BIT1 (1L<<6)
+#define BNX2_CP_CPU_MODE_INTERRUPT_ENA (1L<<7)
+#define BNX2_CP_CPU_MODE_SOFT_HALT (1L<<10)
+#define BNX2_CP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11)
+#define BNX2_CP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12)
+#define BNX2_CP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13)
+#define BNX2_CP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15)
+
+#define BNX2_CP_CPU_STATE 0x00185004
+#define BNX2_CP_CPU_STATE_BREAKPOINT (1L<<0)
+#define BNX2_CP_CPU_STATE_BAD_INST_HALTED (1L<<2)
+#define BNX2_CP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3)
+#define BNX2_CP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4)
+#define BNX2_CP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5)
+#define BNX2_CP_CPU_STATE_BAD_pc_HALTED (1L<<6)
+#define BNX2_CP_CPU_STATE_ALIGN_HALTED (1L<<7)
+#define BNX2_CP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
+#define BNX2_CP_CPU_STATE_SOFT_HALTED (1L<<10)
+#define BNX2_CP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
+#define BNX2_CP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_CP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
+#define BNX2_CP_CPU_STATE_INST_FETCH_STALL (1L<<15)
+#define BNX2_CP_CPU_STATE_BLOCKED_READ (1L<<31)
+
+#define BNX2_CP_CPU_EVENT_MASK 0x00185008
+#define BNX2_CP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0)
+#define BNX2_CP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2)
+#define BNX2_CP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3)
+#define BNX2_CP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4)
+#define BNX2_CP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5)
+#define BNX2_CP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6)
+#define BNX2_CP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7)
+#define BNX2_CP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8)
+#define BNX2_CP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10)
+#define BNX2_CP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11)
+#define BNX2_CP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12)
+
+#define BNX2_CP_CPU_PROGRAM_COUNTER 0x0018501c
+#define BNX2_CP_CPU_INSTRUCTION 0x00185020
+#define BNX2_CP_CPU_DATA_ACCESS 0x00185024
+#define BNX2_CP_CPU_INTERRUPT_ENABLE 0x00185028
+#define BNX2_CP_CPU_INTERRUPT_VECTOR 0x0018502c
+#define BNX2_CP_CPU_INTERRUPT_SAVED_PC 0x00185030
+#define BNX2_CP_CPU_HW_BREAKPOINT 0x00185034
+#define BNX2_CP_CPU_HW_BREAKPOINT_DISABLE (1L<<0)
+#define BNX2_CP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2)
+
+#define BNX2_CP_CPU_DEBUG_VECT_PEEK 0x00185038
+#define BNX2_CP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0)
+#define BNX2_CP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11)
+#define BNX2_CP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12)
+#define BNX2_CP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16)
+#define BNX2_CP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27)
+#define BNX2_CP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28)
+
+#define BNX2_CP_CPU_LAST_BRANCH_ADDR 0x00185048
+#define BNX2_CP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1)
+#define BNX2_CP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1)
+#define BNX2_CP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1)
+#define BNX2_CP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2)
+
+#define BNX2_CP_CPU_REG_FILE 0x00185200
+#define BNX2_CP_CPQ_FTQ_DATA 0x001853c0
+#define BNX2_CP_CPQ_FTQ_CMD 0x001853f8
+#define BNX2_CP_CPQ_FTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_CP_CPQ_FTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_CP_CPQ_FTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_CP_CPQ_FTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_CP_CPQ_FTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_CP_CPQ_FTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_CP_CPQ_FTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_CP_CPQ_FTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_CP_CPQ_FTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_CP_CPQ_FTQ_CMD_POP (1L<<30)
+#define BNX2_CP_CPQ_FTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_CP_CPQ_FTQ_CTL 0x001853fc
+#define BNX2_CP_CPQ_FTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_CP_CPQ_FTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_CP_CPQ_FTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_CP_CPQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_CP_CPQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+#define BNX2_CP_SCRATCH 0x001a0000
+
+
+/*
+ * mcp_reg definition
+ * offset: 0x140000
+ */
+#define BNX2_MCP_CPU_MODE 0x00145000
+#define BNX2_MCP_CPU_MODE_LOCAL_RST (1L<<0)
+#define BNX2_MCP_CPU_MODE_STEP_ENA (1L<<1)
+#define BNX2_MCP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2)
+#define BNX2_MCP_CPU_MODE_PAGE_0_INST_ENA (1L<<3)
+#define BNX2_MCP_CPU_MODE_MSG_BIT1 (1L<<6)
+#define BNX2_MCP_CPU_MODE_INTERRUPT_ENA (1L<<7)
+#define BNX2_MCP_CPU_MODE_SOFT_HALT (1L<<10)
+#define BNX2_MCP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11)
+#define BNX2_MCP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12)
+#define BNX2_MCP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13)
+#define BNX2_MCP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15)
+
+#define BNX2_MCP_CPU_STATE 0x00145004
+#define BNX2_MCP_CPU_STATE_BREAKPOINT (1L<<0)
+#define BNX2_MCP_CPU_STATE_BAD_INST_HALTED (1L<<2)
+#define BNX2_MCP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3)
+#define BNX2_MCP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4)
+#define BNX2_MCP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5)
+#define BNX2_MCP_CPU_STATE_BAD_pc_HALTED (1L<<6)
+#define BNX2_MCP_CPU_STATE_ALIGN_HALTED (1L<<7)
+#define BNX2_MCP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
+#define BNX2_MCP_CPU_STATE_SOFT_HALTED (1L<<10)
+#define BNX2_MCP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
+#define BNX2_MCP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_MCP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
+#define BNX2_MCP_CPU_STATE_INST_FETCH_STALL (1L<<15)
+#define BNX2_MCP_CPU_STATE_BLOCKED_READ (1L<<31)
+
+#define BNX2_MCP_CPU_EVENT_MASK 0x00145008
+#define BNX2_MCP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0)
+#define BNX2_MCP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2)
+#define BNX2_MCP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3)
+#define BNX2_MCP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4)
+#define BNX2_MCP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5)
+#define BNX2_MCP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6)
+#define BNX2_MCP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7)
+#define BNX2_MCP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8)
+#define BNX2_MCP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10)
+#define BNX2_MCP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11)
+#define BNX2_MCP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12)
+
+#define BNX2_MCP_CPU_PROGRAM_COUNTER 0x0014501c
+#define BNX2_MCP_CPU_INSTRUCTION 0x00145020
+#define BNX2_MCP_CPU_DATA_ACCESS 0x00145024
+#define BNX2_MCP_CPU_INTERRUPT_ENABLE 0x00145028
+#define BNX2_MCP_CPU_INTERRUPT_VECTOR 0x0014502c
+#define BNX2_MCP_CPU_INTERRUPT_SAVED_PC 0x00145030
+#define BNX2_MCP_CPU_HW_BREAKPOINT 0x00145034
+#define BNX2_MCP_CPU_HW_BREAKPOINT_DISABLE (1L<<0)
+#define BNX2_MCP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2)
+
+#define BNX2_MCP_CPU_DEBUG_VECT_PEEK 0x00145038
+#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0)
+#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11)
+#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12)
+#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16)
+#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27)
+#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28)
+
+#define BNX2_MCP_CPU_LAST_BRANCH_ADDR 0x00145048
+#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1)
+#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1)
+#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1)
+#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2)
+
+#define BNX2_MCP_CPU_REG_FILE 0x00145200
+#define BNX2_MCP_MCPQ_FTQ_DATA 0x001453c0
+#define BNX2_MCP_MCPQ_FTQ_CMD 0x001453f8
+#define BNX2_MCP_MCPQ_FTQ_CMD_OFFSET (0x3ffL<<0)
+#define BNX2_MCP_MCPQ_FTQ_CMD_WR_TOP (1L<<10)
+#define BNX2_MCP_MCPQ_FTQ_CMD_WR_TOP_0 (0L<<10)
+#define BNX2_MCP_MCPQ_FTQ_CMD_WR_TOP_1 (1L<<10)
+#define BNX2_MCP_MCPQ_FTQ_CMD_SFT_RESET (1L<<25)
+#define BNX2_MCP_MCPQ_FTQ_CMD_RD_DATA (1L<<26)
+#define BNX2_MCP_MCPQ_FTQ_CMD_ADD_INTERVEN (1L<<27)
+#define BNX2_MCP_MCPQ_FTQ_CMD_ADD_DATA (1L<<28)
+#define BNX2_MCP_MCPQ_FTQ_CMD_INTERVENE_CLR (1L<<29)
+#define BNX2_MCP_MCPQ_FTQ_CMD_POP (1L<<30)
+#define BNX2_MCP_MCPQ_FTQ_CMD_BUSY (1L<<31)
+
+#define BNX2_MCP_MCPQ_FTQ_CTL 0x001453fc
+#define BNX2_MCP_MCPQ_FTQ_CTL_INTERVENE (1L<<0)
+#define BNX2_MCP_MCPQ_FTQ_CTL_OVERFLOW (1L<<1)
+#define BNX2_MCP_MCPQ_FTQ_CTL_FORCE_INTERVENE (1L<<2)
+#define BNX2_MCP_MCPQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12)
+#define BNX2_MCP_MCPQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22)
+
+#define BNX2_MCP_ROM 0x00150000
+#define BNX2_MCP_SCRATCH 0x00160000
+
+
+#define NUM_MC_HASH_REGISTERS 8
+
+
+/* PHY_ID1: bits 31-16; PHY_ID2: bits 15-0. */
+#define PHY_BCM5706_PHY_ID 0x00206160
+
+#define PHY_ID(id) ((id) & 0xfffffff0)
+#define PHY_REV_ID(id) ((id) & 0xf)
+
+#define MIN_ETHERNET_PACKET_SIZE 60
+#define MAX_ETHERNET_PACKET_SIZE 1514
+#define MAX_ETHERNET_JUMBO_PACKET_SIZE 9014
+
+#define RX_COPY_THRESH 92
+
+#define DMA_READ_CHANS 5
+#define DMA_WRITE_CHANS 3
+
+#define BCM_PAGE_BITS 12
+#define BCM_PAGE_SIZE (1 << BCM_PAGE_BITS)
+
+#define TX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct tx_bd))
+#define MAX_TX_DESC_CNT (TX_DESC_CNT - 1)
+
+#define RX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct rx_bd))
+#define MAX_RX_DESC_CNT (RX_DESC_CNT - 1)
+
+#define NEXT_TX_BD(x) (((x) & (MAX_TX_DESC_CNT - 1)) == \
+ (MAX_TX_DESC_CNT - 1)) ? \
+ (x) + 2 : (x) + 1
+
+#define TX_RING_IDX(x) ((x) & MAX_TX_DESC_CNT)
+
+#define NEXT_RX_BD(x) (((x) & (MAX_RX_DESC_CNT - 1)) == \
+ (MAX_RX_DESC_CNT - 1)) ? \
+ (x) + 2 : (x) + 1
+
+#define RX_RING_IDX(x) ((x) & MAX_RX_DESC_CNT)
+
+
+/* Context size. */
+#define CTX_SHIFT 7
+#define CTX_SIZE (1 << CTX_SHIFT)
+#define CTX_MASK (CTX_SIZE - 1)
+#define GET_CID_ADDR(_cid) ((_cid) << CTX_SHIFT)
+#define GET_CID(_cid_addr) ((_cid_addr) >> CTX_SHIFT)
+
+#define PHY_CTX_SHIFT 6
+#define PHY_CTX_SIZE (1 << PHY_CTX_SHIFT)
+#define PHY_CTX_MASK (PHY_CTX_SIZE - 1)
+#define GET_PCID_ADDR(_pcid) ((_pcid) << PHY_CTX_SHIFT)
+#define GET_PCID(_pcid_addr) ((_pcid_addr) >> PHY_CTX_SHIFT)
+
+#define MB_KERNEL_CTX_SHIFT 8
+#define MB_KERNEL_CTX_SIZE (1 << MB_KERNEL_CTX_SHIFT)
+#define MB_KERNEL_CTX_MASK (MB_KERNEL_CTX_SIZE - 1)
+#define MB_GET_CID_ADDR(_cid) (0x10000 + ((_cid) << MB_KERNEL_CTX_SHIFT))
+
+#define MAX_CID_CNT 0x4000
+#define MAX_CID_ADDR (GET_CID_ADDR(MAX_CID_CNT))
+#define INVALID_CID_ADDR 0xffffffff
+
+#define TX_CID 16
+#define RX_CID 0
+
+#define MB_TX_CID_ADDR MB_GET_CID_ADDR(TX_CID)
+#define MB_RX_CID_ADDR MB_GET_CID_ADDR(RX_CID)
+
+struct sw_bd {
+ struct sk_buff *skb;
+ DECLARE_PCI_UNMAP_ADDR(mapping)
+};
+
+/* Buffered flash (Atmel: AT45DB011B) specific information */
+#define SEEPROM_PAGE_BITS 2
+#define SEEPROM_PHY_PAGE_SIZE (1 << SEEPROM_PAGE_BITS)
+#define SEEPROM_BYTE_ADDR_MASK (SEEPROM_PHY_PAGE_SIZE-1)
+#define SEEPROM_PAGE_SIZE 4
+#define SEEPROM_TOTAL_SIZE 65536
+
+#define BUFFERED_FLASH_PAGE_BITS 9
+#define BUFFERED_FLASH_PHY_PAGE_SIZE (1 << BUFFERED_FLASH_PAGE_BITS)
+#define BUFFERED_FLASH_BYTE_ADDR_MASK (BUFFERED_FLASH_PHY_PAGE_SIZE-1)
+#define BUFFERED_FLASH_PAGE_SIZE 264
+#define BUFFERED_FLASH_TOTAL_SIZE 131072
+
+#define SAIFUN_FLASH_PAGE_BITS 8
+#define SAIFUN_FLASH_PHY_PAGE_SIZE (1 << SAIFUN_FLASH_PAGE_BITS)
+#define SAIFUN_FLASH_BYTE_ADDR_MASK (SAIFUN_FLASH_PHY_PAGE_SIZE-1)
+#define SAIFUN_FLASH_PAGE_SIZE 256
+#define SAIFUN_FLASH_BASE_TOTAL_SIZE 65536
+
+#define NVRAM_TIMEOUT_COUNT 30000
+
+
+#define FLASH_STRAP_MASK (BNX2_NVM_CFG1_FLASH_MODE | \
+ BNX2_NVM_CFG1_BUFFER_MODE | \
+ BNX2_NVM_CFG1_PROTECT_MODE | \
+ BNX2_NVM_CFG1_FLASH_SIZE)
+
+struct flash_spec {
+ u32 strapping;
+ u32 config1;
+ u32 config2;
+ u32 config3;
+ u32 write1;
+ u32 buffered;
+ u32 page_bits;
+ u32 page_size;
+ u32 addr_mask;
+ u32 total_size;
+ u8 *name;
+};
+
+struct bnx2 {
+ /* Fields used in the tx and intr/napi performance paths are grouped */
+ /* together in the beginning of the structure. */
+ void __iomem *regview;
+
+ struct net_device *dev;
+ struct pci_dev *pdev;
+
+ atomic_t intr_sem;
+
+ struct status_block *status_blk;
+ u32 last_status_idx;
+
+ atomic_t tx_avail_bd;
+ struct tx_bd *tx_desc_ring;
+ struct sw_bd *tx_buf_ring;
+ u32 tx_prod_bseq;
+ u16 tx_prod;
+ u16 tx_cons;
+
+#ifdef BCM_VLAN
+ struct vlan_group *vlgrp;
+#endif
+
+ u32 rx_offset;
+ u32 rx_buf_use_size; /* useable size */
+ u32 rx_buf_size; /* with alignment */
+ struct rx_bd *rx_desc_ring;
+ struct sw_bd *rx_buf_ring;
+ u32 rx_prod_bseq;
+ u16 rx_prod;
+ u16 rx_cons;
+
+ u32 rx_csum;
+
+ /* Only used to synchronize netif_stop_queue/wake_queue when tx */
+ /* ring is full */
+ spinlock_t tx_lock;
+
+ /* End of fileds used in the performance code paths. */
+
+ char *name;
+
+ int timer_interval;
+ struct timer_list timer;
+ struct work_struct reset_task;
+
+ /* Used to synchronize phy accesses. */
+ spinlock_t phy_lock;
+
+ u32 flags;
+#define PCIX_FLAG 1
+#define PCI_32BIT_FLAG 2
+#define ONE_TDMA_FLAG 4 /* no longer used */
+#define NO_WOL_FLAG 8
+#define USING_DAC_FLAG 0x10
+#define USING_MSI_FLAG 0x20
+
+ u32 phy_flags;
+#define PHY_SERDES_FLAG 1
+#define PHY_CRC_FIX_FLAG 2
+#define PHY_PARALLEL_DETECT_FLAG 4
+#define PHY_INT_MODE_MASK_FLAG 0x300
+#define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100
+#define PHY_INT_MODE_LINK_READY_FLAG 0x200
+
+ u32 chip_id;
+ /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
+#define CHIP_NUM(bp) (((bp)->chip_id) & 0xffff0000)
+#define CHIP_NUM_5706 0x57060000
+
+#define CHIP_REV(bp) (((bp)->chip_id) & 0x0000f000)
+#define CHIP_REV_Ax 0x00000000
+#define CHIP_REV_Bx 0x00001000
+#define CHIP_REV_Cx 0x00002000
+
+#define CHIP_METAL(bp) (((bp)->chip_id) & 0x00000ff0)
+#define CHIP_BONDING(bp) (((bp)->chip_id) & 0x0000000f)
+
+#define CHIP_ID(bp) (((bp)->chip_id) & 0xfffffff0)
+#define CHIP_ID_5706_A0 0x57060000
+#define CHIP_ID_5706_A1 0x57060010
+
+#define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0xf)
+
+/* A serdes chip will have the first bit of the bond id set. */
+#define CHIP_BOND_ID_SERDES_BIT 0x01
+
+ u32 phy_addr;
+ u32 phy_id;
+
+ u16 bus_speed_mhz;
+ u8 wol;
+
+ u8 fw_timed_out;
+
+ u16 fw_wr_seq;
+ u16 fw_drv_pulse_wr_seq;
+
+ int tx_ring_size;
+ dma_addr_t tx_desc_mapping;
+
+
+ int rx_ring_size;
+ dma_addr_t rx_desc_mapping;
+
+ u16 tx_quick_cons_trip;
+ u16 tx_quick_cons_trip_int;
+ u16 rx_quick_cons_trip;
+ u16 rx_quick_cons_trip_int;
+ u16 comp_prod_trip;
+ u16 comp_prod_trip_int;
+ u16 tx_ticks;
+ u16 tx_ticks_int;
+ u16 com_ticks;
+ u16 com_ticks_int;
+ u16 cmd_ticks;
+ u16 cmd_ticks_int;
+ u16 rx_ticks;
+ u16 rx_ticks_int;
+
+ u32 stats_ticks;
+
+ dma_addr_t status_blk_mapping;
+
+ struct statistics_block *stats_blk;
+ dma_addr_t stats_blk_mapping;
+
+ u32 rx_mode;
+
+ u16 req_line_speed;
+ u8 req_duplex;
+
+ u8 link_up;
+
+ u16 line_speed;
+ u8 duplex;
+ u8 flow_ctrl; /* actual flow ctrl settings */
+ /* may be different from */
+ /* req_flow_ctrl if autoneg */
+#define FLOW_CTRL_TX 1
+#define FLOW_CTRL_RX 2
+
+ u32 advertising;
+
+ u8 req_flow_ctrl; /* flow ctrl advertisement */
+ /* settings or forced */
+ /* settings */
+ u8 autoneg;
+#define AUTONEG_SPEED 1
+#define AUTONEG_FLOW_CTRL 2
+
+ u8 loopback;
+#define MAC_LOOPBACK 1
+#define PHY_LOOPBACK 2
+
+ u8 serdes_an_pending;
+#define SERDES_AN_TIMEOUT (2 * HZ)
+
+ u8 mac_addr[8];
+
+ u32 fw_ver;
+
+ int pm_cap;
+ int pcix_cap;
+
+ struct net_device_stats net_stats;
+
+ struct flash_spec *flash_info;
+};
+
+static u32 bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset);
+static void bnx2_reg_wr_ind(struct bnx2 *bp, u32 offset, u32 val);
+
+#define REG_RD(bp, offset) \
+ readl(bp->regview + offset)
+
+#define REG_WR(bp, offset, val) \
+ writel(val, bp->regview + offset)
+
+#define REG_WR16(bp, offset, val) \
+ writew(val, bp->regview + offset)
+
+#define REG_RD_IND(bp, offset) \
+ bnx2_reg_rd_ind(bp, offset)
+
+#define REG_WR_IND(bp, offset, val) \
+ bnx2_reg_wr_ind(bp, offset, val)
+
+/* Indirect context access. Unlike the MBQ_WR, these macros will not
+ * trigger a chip event. */
+static void bnx2_ctx_wr(struct bnx2 *bp, u32 cid_addr, u32 offset, u32 val);
+
+#define CTX_WR(bp, cid_addr, offset, val) \
+ bnx2_ctx_wr(bp, cid_addr, offset, val)
+
+struct cpu_reg {
+ u32 mode;
+ u32 mode_value_halt;
+ u32 mode_value_sstep;
+
+ u32 state;
+ u32 state_value_clear;
+
+ u32 gpr0;
+ u32 evmask;
+ u32 pc;
+ u32 inst;
+ u32 bp;
+
+ u32 spad_base;
+
+ u32 mips_view_base;
+};
+
+struct fw_info {
+ u32 ver_major;
+ u32 ver_minor;
+ u32 ver_fix;
+
+ u32 start_addr;
+
+ /* Text section. */
+ u32 text_addr;
+ u32 text_len;
+ u32 text_index;
+ u32 *text;
+
+ /* Data section. */
+ u32 data_addr;
+ u32 data_len;
+ u32 data_index;
+ u32 *data;
+
+ /* SBSS section. */
+ u32 sbss_addr;
+ u32 sbss_len;
+ u32 sbss_index;
+ u32 *sbss;
+
+ /* BSS section. */
+ u32 bss_addr;
+ u32 bss_len;
+ u32 bss_index;
+ u32 *bss;
+
+ /* Read-only section. */
+ u32 rodata_addr;
+ u32 rodata_len;
+ u32 rodata_index;
+ u32 *rodata;
+};
+
+#define RV2P_PROC1 0
+#define RV2P_PROC2 1
+
+
+/* This value (in milliseconds) determines the frequency of the driver
+ * issuing the PULSE message code. The firmware monitors this periodic
+ * pulse to determine when to switch to an OS-absent mode. */
+#define DRV_PULSE_PERIOD_MS 250
+
+/* This value (in milliseconds) determines how long the driver should
+ * wait for an acknowledgement from the firmware before timing out. Once
+ * the firmware has timed out, the driver will assume there is no firmware
+ * running and there won't be any firmware-driver synchronization during a
+ * driver reset. */
+#define FW_ACK_TIME_OUT_MS 50
+
+
+#define BNX2_DRV_RESET_SIGNATURE 0x00000000
+#define BNX2_DRV_RESET_SIGNATURE_MAGIC 0x4841564b /* HAVK */
+//#define DRV_RESET_SIGNATURE_MAGIC 0x47495352 /* RSIG */
+
+#define BNX2_DRV_MB 0x00000004
+#define BNX2_DRV_MSG_CODE 0xff000000
+#define BNX2_DRV_MSG_CODE_RESET 0x01000000
+#define BNX2_DRV_MSG_CODE_UNLOAD 0x02000000
+#define BNX2_DRV_MSG_CODE_SHUTDOWN 0x03000000
+#define BNX2_DRV_MSG_CODE_SUSPEND_WOL 0x04000000
+#define BNX2_DRV_MSG_CODE_FW_TIMEOUT 0x05000000
+#define BNX2_DRV_MSG_CODE_PULSE 0x06000000
+#define BNX2_DRV_MSG_CODE_DIAG 0x07000000
+#define BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL 0x09000000
+
+#define BNX2_DRV_MSG_DATA 0x00ff0000
+#define BNX2_DRV_MSG_DATA_WAIT0 0x00010000
+#define BNX2_DRV_MSG_DATA_WAIT1 0x00020000
+#define BNX2_DRV_MSG_DATA_WAIT2 0x00030000
+#define BNX2_DRV_MSG_DATA_WAIT3 0x00040000
+
+#define BNX2_DRV_MSG_SEQ 0x0000ffff
+
+#define BNX2_FW_MB 0x00000008
+#define BNX2_FW_MSG_ACK 0x0000ffff
+#define BNX2_FW_MSG_STATUS_MASK 0x00ff0000
+#define BNX2_FW_MSG_STATUS_OK 0x00000000
+#define BNX2_FW_MSG_STATUS_FAILURE 0x00ff0000
+
+#define BNX2_LINK_STATUS 0x0000000c
+
+#define BNX2_DRV_PULSE_MB 0x00000010
+#define BNX2_DRV_PULSE_SEQ_MASK 0x0000ffff
+
+/* Indicate to the firmware not to go into the
+ * OS absent when it is not getting driver pulse.
+ * This is used for debugging. */
+#define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE 0x00010000
+
+#define BNX2_DEV_INFO_SIGNATURE 0x00000020
+#define BNX2_DEV_INFO_SIGNATURE_MAGIC 0x44564900
+#define BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK 0xffffff00
+#define BNX2_DEV_INFO_FEATURE_CFG_VALID 0x01
+#define BNX2_DEV_INFO_SECONDARY_PORT 0x80
+#define BNX2_DEV_INFO_DRV_ALWAYS_ALIVE 0x40
+
+#define BNX2_SHARED_HW_CFG_PART_NUM 0x00000024
+
+#define BNX2_SHARED_HW_CFG_POWER_DISSIPATED 0x00000034
+#define BNX2_SHARED_HW_CFG_POWER_STATE_D3_MASK 0xff000000
+#define BNX2_SHARED_HW_CFG_POWER_STATE_D2_MASK 0xff0000
+#define BNX2_SHARED_HW_CFG_POWER_STATE_D1_MASK 0xff00
+#define BNX2_SHARED_HW_CFG_POWER_STATE_D0_MASK 0xff
+
+#define BNX2_SHARED_HW_CFG POWER_CONSUMED 0x00000038
+#define BNX2_SHARED_HW_CFG_CONFIG 0x0000003c
+#define BNX2_SHARED_HW_CFG_DESIGN_NIC 0
+#define BNX2_SHARED_HW_CFG_DESIGN_LOM 0x1
+#define BNX2_SHARED_HW_CFG_PHY_COPPER 0
+#define BNX2_SHARED_HW_CFG_PHY_FIBER 0x2
+#define BNX2_SHARED_HW_CFG_LED_MODE_SHIFT_BITS 8
+#define BNX2_SHARED_HW_CFG_LED_MODE_MASK 0x300
+#define BNX2_SHARED_HW_CFG_LED_MODE_MAC 0
+#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY1 0x100
+#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY2 0x200
+
+#define BNX2_DEV_INFO_BC_REV 0x0000004c
+
+#define BNX2_PORT_HW_CFG_MAC_UPPER 0x00000050
+#define BNX2_PORT_HW_CFG_UPPERMAC_MASK 0xffff
+
+#define BNX2_PORT_HW_CFG_MAC_LOWER 0x00000054
+#define BNX2_PORT_HW_CFG_CONFIG 0x00000058
+
+#define BNX2_PORT_HW_CFG_IMD_MAC_A_UPPER 0x00000068
+#define BNX2_PORT_HW_CFG_IMD_MAC_A_LOWER 0x0000006c
+#define BNX2_PORT_HW_CFG_IMD_MAC_B_UPPER 0x00000070
+#define BNX2_PORT_HW_CFG_IMD_MAC_B_LOWER 0x00000074
+#define BNX2_PORT_HW_CFG_ISCSI_MAC_UPPER 0x00000078
+#define BNX2_PORT_HW_CFG_ISCSI_MAC_LOWER 0x0000007c
+
+#define BNX2_DEV_INFO_PER_PORT_HW_CONFIG2 0x000000b4
+
+#define BNX2_DEV_INFO_FORMAT_REV 0x000000c4
+#define BNX2_DEV_INFO_FORMAT_REV_MASK 0xff000000
+#define BNX2_DEV_INFO_FORMAT_REV_ID ('A' << 24)
+
+#define BNX2_SHARED_FEATURE 0x000000c8
+#define BNX2_SHARED_FEATURE_MASK 0xffffffff
+
+#define BNX2_PORT_FEATURE 0x000000d8
+#define BNX2_PORT2_FEATURE 0x00000014c
+#define BNX2_PORT_FEATURE_WOL_ENABLED 0x01000000
+#define BNX2_PORT_FEATURE_MBA_ENABLED 0x02000000
+#define BNX2_PORT_FEATURE_ASF_ENABLED 0x04000000
+#define BNX2_PORT_FEATURE_IMD_ENABLED 0x08000000
+#define BNX2_PORT_FEATURE_BAR1_SIZE_MASK 0xf
+#define BNX2_PORT_FEATURE_BAR1_SIZE_DISABLED 0x0
+#define BNX2_PORT_FEATURE_BAR1_SIZE_64K 0x1
+#define BNX2_PORT_FEATURE_BAR1_SIZE_128K 0x2
+#define BNX2_PORT_FEATURE_BAR1_SIZE_256K 0x3
+#define BNX2_PORT_FEATURE_BAR1_SIZE_512K 0x4
+#define BNX2_PORT_FEATURE_BAR1_SIZE_1M 0x5
+#define BNX2_PORT_FEATURE_BAR1_SIZE_2M 0x6
+#define BNX2_PORT_FEATURE_BAR1_SIZE_4M 0x7
+#define BNX2_PORT_FEATURE_BAR1_SIZE_8M 0x8
+#define BNX2_PORT_FEATURE_BAR1_SIZE_16M 0x9
+#define BNX2_PORT_FEATURE_BAR1_SIZE_32M 0xa
+#define BNX2_PORT_FEATURE_BAR1_SIZE_64M 0xb
+#define BNX2_PORT_FEATURE_BAR1_SIZE_128M 0xc
+#define BNX2_PORT_FEATURE_BAR1_SIZE_256M 0xd
+#define BNX2_PORT_FEATURE_BAR1_SIZE_512M 0xe
+#define BNX2_PORT_FEATURE_BAR1_SIZE_1G 0xf
+
+#define BNX2_PORT_FEATURE_WOL 0xdc
+#define BNX2_PORT2_FEATURE_WOL 0x150
+#define BNX2_PORT_FEATURE_WOL_DEFAULT_SHIFT_BITS 4
+#define BNX2_PORT_FEATURE_WOL_DEFAULT_MASK 0x30
+#define BNX2_PORT_FEATURE_WOL_DEFAULT_DISABLE 0
+#define BNX2_PORT_FEATURE_WOL_DEFAULT_MAGIC 0x10
+#define BNX2_PORT_FEATURE_WOL_DEFAULT_ACPI 0x20
+#define BNX2_PORT_FEATURE_WOL_DEFAULT_MAGIC_AND_ACPI 0x30
+#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_MASK 0xf
+#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_AUTONEG 0
+#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_10HALF 1
+#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_10FULL 2
+#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_100HALF 3
+#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_100FULL 4
+#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_1000HALF 5
+#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_1000FULL 6
+#define BNX2_PORT_FEATURE_WOL_AUTONEG_ADVERTISE_1000 0x40
+#define BNX2_PORT_FEATURE_WOL_RESERVED_PAUSE_CAP 0x400
+#define BNX2_PORT_FEATURE_WOL_RESERVED_ASYM_PAUSE_CAP 0x800
+
+#define BNX2_PORT_FEATURE_MBA 0xe0
+#define BNX2_PORT2_FEATURE_MBA 0x154
+#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_SHIFT_BITS 0
+#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK 0x3
+#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE 0
+#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_RPL 1
+#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_BOOTP 2
+#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_SHIFT_BITS 2
+#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_MASK 0x3c
+#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_AUTONEG 0
+#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_10HALF 0x4
+#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_10FULL 0x8
+#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_100HALF 0xc
+#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_100FULL 0x10
+#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_1000HALF 0x14
+#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_1000FULL 0x18
+#define BNX2_PORT_FEATURE_MBA_SETUP_PROMPT_ENABLE 0x40
+#define BNX2_PORT_FEATURE_MBA_HOTKEY_CTRL_S 0
+#define BNX2_PORT_FEATURE_MBA_HOTKEY_CTRL_B 0x80
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_SHIFT_BITS 8
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_MASK 0xff00
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_DISABLED 0
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_1K 0x100
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_2K 0x200
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_4K 0x300
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_8K 0x400
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_16K 0x500
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_32K 0x600
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_64K 0x700
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_128K 0x800
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_256K 0x900
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_512K 0xa00
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_1M 0xb00
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_2M 0xc00
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_4M 0xd00
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_8M 0xe00
+#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_16M 0xf00
+#define BNX2_PORT_FEATURE_MBA_MSG_TIMEOUT_SHIFT_BITS 16
+#define BNX2_PORT_FEATURE_MBA_MSG_TIMEOUT_MASK 0xf0000
+#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_SHIFT_BITS 20
+#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_MASK 0x300000
+#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_AUTO 0
+#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_BBS 0x100000
+#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_INT18H 0x200000
+#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_INT19H 0x300000
+
+#define BNX2_PORT_FEATURE_IMD 0xe4
+#define BNX2_PORT2_FEATURE_IMD 0x158
+#define BNX2_PORT_FEATURE_IMD_LINK_OVERRIDE_DEFAULT 0
+#define BNX2_PORT_FEATURE_IMD_LINK_OVERRIDE_ENABLE 1
+
+#define BNX2_PORT_FEATURE_VLAN 0xe8
+#define BNX2_PORT2_FEATURE_VLAN 0x15c
+#define BNX2_PORT_FEATURE_MBA_VLAN_TAG_MASK 0xffff
+#define BNX2_PORT_FEATURE_MBA_VLAN_ENABLE 0x10000
+
+#define BNX2_BC_STATE_RESET_TYPE 0x000001c0
+#define BNX2_BC_STATE_RESET_TYPE_SIG 0x00005254
+#define BNX2_BC_STATE_RESET_TYPE_SIG_MASK 0x0000ffff
+#define BNX2_BC_STATE_RESET_TYPE_NONE (BNX2_BC_STATE_RESET_TYPE_SIG | \
+ 0x00010000)
+#define BNX2_BC_STATE_RESET_TYPE_PCI (BNX2_BC_STATE_RESET_TYPE_SIG | \
+ 0x00020000)
+#define BNX2_BC_STATE_RESET_TYPE_VAUX (BNX2_BC_STATE_RESET_TYPE_SIG | \
+ 0x00030000)
+#define BNX2_BC_STATE_RESET_TYPE_DRV_MASK DRV_MSG_CODE
+#define BNX2_BC_STATE_RESET_TYPE_DRV_RESET (BNX2_BC_STATE_RESET_TYPE_SIG | \
+ DRV_MSG_CODE_RESET)
+#define BNX2_BC_STATE_RESET_TYPE_DRV_UNLOAD (BNX2_BC_STATE_RESET_TYPE_SIG | \
+ DRV_MSG_CODE_UNLOAD)
+#define BNX2_BC_STATE_RESET_TYPE_DRV_SHUTDOWN (BNX2_BC_STATE_RESET_TYPE_SIG | \
+ DRV_MSG_CODE_SHUTDOWN)
+#define BNX2_BC_STATE_RESET_TYPE_DRV_WOL (BNX2_BC_STATE_RESET_TYPE_SIG | \
+ DRV_MSG_CODE_WOL)
+#define BNX2_BC_STATE_RESET_TYPE_DRV_DIAG (BNX2_BC_STATE_RESET_TYPE_SIG | \
+ DRV_MSG_CODE_DIAG)
+#define BNX2_BC_STATE_RESET_TYPE_VALUE(msg) (BNX2_BC_STATE_RESET_TYPE_SIG | \
+ (msg))
+
+#define BNX2_BC_STATE 0x000001c4
+#define BNX2_BC_STATE_ERR_MASK 0x0000ff00
+#define BNX2_BC_STATE_SIGN 0x42530000
+#define BNX2_BC_STATE_SIGN_MASK 0xffff0000
+#define BNX2_BC_STATE_BC1_START (BNX2_BC_STATE_SIGN | 0x1)
+#define BNX2_BC_STATE_GET_NVM_CFG1 (BNX2_BC_STATE_SIGN | 0x2)
+#define BNX2_BC_STATE_PROG_BAR (BNX2_BC_STATE_SIGN | 0x3)
+#define BNX2_BC_STATE_INIT_VID (BNX2_BC_STATE_SIGN | 0x4)
+#define BNX2_BC_STATE_GET_NVM_CFG2 (BNX2_BC_STATE_SIGN | 0x5)
+#define BNX2_BC_STATE_APPLY_WKARND (BNX2_BC_STATE_SIGN | 0x6)
+#define BNX2_BC_STATE_LOAD_BC2 (BNX2_BC_STATE_SIGN | 0x7)
+#define BNX2_BC_STATE_GOING_BC2 (BNX2_BC_STATE_SIGN | 0x8)
+#define BNX2_BC_STATE_GOING_DIAG (BNX2_BC_STATE_SIGN | 0x9)
+#define BNX2_BC_STATE_RT_FINAL_INIT (BNX2_BC_STATE_SIGN | 0x81)
+#define BNX2_BC_STATE_RT_WKARND (BNX2_BC_STATE_SIGN | 0x82)
+#define BNX2_BC_STATE_RT_DRV_PULSE (BNX2_BC_STATE_SIGN | 0x83)
+#define BNX2_BC_STATE_RT_FIOEVTS (BNX2_BC_STATE_SIGN | 0x84)
+#define BNX2_BC_STATE_RT_DRV_CMD (BNX2_BC_STATE_SIGN | 0x85)
+#define BNX2_BC_STATE_RT_LOW_POWER (BNX2_BC_STATE_SIGN | 0x86)
+#define BNX2_BC_STATE_RT_SET_WOL (BNX2_BC_STATE_SIGN | 0x87)
+#define BNX2_BC_STATE_RT_OTHER_FW (BNX2_BC_STATE_SIGN | 0x88)
+#define BNX2_BC_STATE_RT_GOING_D3 (BNX2_BC_STATE_SIGN | 0x89)
+#define BNX2_BC_STATE_ERR_BAD_VERSION (BNX2_BC_STATE_SIGN | 0x0100)
+#define BNX2_BC_STATE_ERR_BAD_BC2_CRC (BNX2_BC_STATE_SIGN | 0x0200)
+#define BNX2_BC_STATE_ERR_BC1_LOOP (BNX2_BC_STATE_SIGN | 0x0300)
+#define BNX2_BC_STATE_ERR_UNKNOWN_CMD (BNX2_BC_STATE_SIGN | 0x0400)
+#define BNX2_BC_STATE_ERR_DRV_DEAD (BNX2_BC_STATE_SIGN | 0x0500)
+#define BNX2_BC_STATE_ERR_NO_RXP (BNX2_BC_STATE_SIGN | 0x0600)
+#define BNX2_BC_STATE_ERR_TOO_MANY_RBUF (BNX2_BC_STATE_SIGN | 0x0700)
+
+#define BNX2_BC_STATE_DEBUG_CMD 0x1dc
+#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE 0x42440000
+#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE_MASK 0xffff0000
+#define BNX2_BC_STATE_BC_DBG_CMD_LOOP_CNT_MASK 0xffff
+#define BNX2_BC_STATE_BC_DBG_CMD_LOOP_INFINITE 0xffff
+
+#define HOST_VIEW_SHMEM_BASE 0x167c00
+
+#endif
diff --git a/drivers/net/bnx2_fw.h b/drivers/net/bnx2_fw.h
new file mode 100644
index 0000000..35f3a2a
--- /dev/null
+++ b/drivers/net/bnx2_fw.h
@@ -0,0 +1,2468 @@
+/* bnx2_fw.h: Broadcom NX2 network driver.
+ *
+ * Copyright (c) 2004, 2005 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, except as noted below.
+ *
+ * This file contains firmware data derived from proprietary unpublished
+ * source code, Copyright (c) 2004, 2005 Broadcom Corporation.
+ *
+ * Permission is hereby granted for the distribution of this firmware data
+ * in hexadecimal or equivalent format, provided this copyright notice is
+ * accompanying it.
+ */
+
+
+static int bnx2_COM_b06FwReleaseMajor = 0x0;
+static int bnx2_COM_b06FwReleaseMinor = 0x0;
+static int bnx2_COM_b06FwReleaseFix = 0x0;
+static u32 bnx2_COM_b06FwStartAddr = 0x080004a0;
+static u32 bnx2_COM_b06FwTextAddr = 0x08000000;
+static int bnx2_COM_b06FwTextLen = 0x4594;
+static u32 bnx2_COM_b06FwDataAddr = 0x080045e0;
+static int bnx2_COM_b06FwDataLen = 0x0;
+static u32 bnx2_COM_b06FwRodataAddr = 0x08004598;
+static int bnx2_COM_b06FwRodataLen = 0x18;
+static u32 bnx2_COM_b06FwBssAddr = 0x08004600;
+static int bnx2_COM_b06FwBssLen = 0x88;
+static u32 bnx2_COM_b06FwSbssAddr = 0x080045e0;
+static int bnx2_COM_b06FwSbssLen = 0x1c;
+static u32 bnx2_COM_b06FwText[(0x4594/4) + 1] = {
+ 0x0a000128, 0x00000000, 0x00000000, 0x0000000d, 0x636f6d20, 0x302e362e,
+ 0x39000000, 0x00060902, 0x00000000, 0x00000003, 0x00000014, 0x00000032,
+ 0x00000003, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000010, 0x000003e8, 0x0000ea60, 0x00000001, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x0000ffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000002, 0x00000020, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x10000003, 0x00000000, 0x0000000d,
+ 0x0000000d, 0x3c020800, 0x244245e0, 0x3c030800, 0x24634688, 0xac400000,
+ 0x0043202b, 0x1480fffd, 0x24420004, 0x3c1d0800, 0x37bd7ffc, 0x03a0f021,
+ 0x3c100800, 0x261004a0, 0x3c1c0800, 0x279c45e0, 0x0e0001f2, 0x00000000,
+ 0x0000000d, 0x27bdffe8, 0x3c1a8000, 0x3c020008, 0x0342d825, 0x3c036010,
+ 0xafbf0010, 0x8c655000, 0x3c020800, 0x24470ac8, 0x3c040800, 0x24864600,
+ 0x2402ff7f, 0x00a22824, 0x34a5380c, 0xac655000, 0x00002821, 0x24020037,
+ 0x24030c80, 0xaf420008, 0xaf430024, 0xacc70000, 0x24a50001, 0x2ca20016,
+ 0x1440fffc, 0x24c60004, 0x24844600, 0x3c020800, 0x24420ad4, 0x3c030800,
+ 0x246309d4, 0xac820004, 0x3c020800, 0x24420618, 0x3c050800, 0x24a50ca0,
+ 0xac82000c, 0x3c020800, 0x24423100, 0xac830008, 0x3c030800, 0x246325c8,
+ 0xac820014, 0x3c020800, 0x24422b0c, 0xac830018, 0xac83001c, 0x3c030800,
+ 0x24630adc, 0xac820024, 0x3c020800, 0x24423040, 0xac83002c, 0x3c030800,
+ 0x24633060, 0xac820030, 0x3c020800, 0x24422f6c, 0xac830034, 0x3c030800,
+ 0x24632c60, 0xac82003c, 0x3c020800, 0x24420b6c, 0xac850010, 0xac850020,
+ 0xac830040, 0x0e000bd6, 0xac820050, 0x8fbf0010, 0x03e00008, 0x27bd0018,
+ 0x27bdffe0, 0xafb00010, 0x27500100, 0xafbf0018, 0xafb10014, 0x9203000b,
+ 0x24020003, 0x1462005b, 0x96110008, 0x32220001, 0x10400009, 0x27430080,
+ 0x8e020000, 0x96040014, 0x000211c2, 0x00021040, 0x00621821, 0xa4640000,
+ 0x0a0001cb, 0x3c020800, 0x3c020800, 0x8c430020, 0x1060002a, 0x3c030800,
+ 0x0e001006, 0x00000000, 0x97420108, 0x8f850018, 0x9743010c, 0x3042003e,
+ 0x00021400, 0x00621825, 0xaca30000, 0x8f840018, 0x8f420100, 0xac820004,
+ 0x97430116, 0x9742010e, 0x8f840018, 0x00031c00, 0x00431025, 0xac820008,
+ 0x97430110, 0x97440112, 0x8f850018, 0x00031c00, 0x00832025, 0xaca4000c,
+ 0x97420114, 0x8f840018, 0x3042ffff, 0xac820010, 0x8f830018, 0xac600014,
+ 0x8f820018, 0x3c030800, 0xac400018, 0x9462466e, 0x8f840018, 0x3c032000,
+ 0x00431025, 0xac82001c, 0x0e001044, 0x24040001, 0x3c030800, 0x8c620040,
+ 0x24420001, 0xac620040, 0x3c020800, 0x8c430044, 0x32240004, 0x24630001,
+ 0x10800017, 0xac430044, 0x8f4202b8, 0x04430007, 0x8e020020, 0x3c040800,
+ 0x8c830060, 0x24020001, 0x24630001, 0x0a0001ed, 0xac830060, 0x3c060800,
+ 0x8cc4005c, 0xaf420280, 0x96030016, 0x00001021, 0xa7430284, 0x8e050004,
+ 0x24840001, 0x3c031000, 0xaf450288, 0xaf4302b8, 0x0a0001ed, 0xacc4005c,
+ 0x32220002, 0x0a0001ed, 0x0002102b, 0x3c026000, 0xac400808, 0x0000000d,
+ 0x00001021, 0x8fbf0018, 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020,
+ 0x27bdffc8, 0xafbf0034, 0xafbe0030, 0xafb7002c, 0xafb60028, 0xafb50024,
+ 0xafb40020, 0xafb3001c, 0xafb20018, 0xafb10014, 0x0e00013f, 0xafb00010,
+ 0x24110020, 0x24150030, 0x2794000c, 0x27930008, 0x3c124000, 0x3c1e0800,
+ 0x3c170800, 0x3c160800, 0x8f820004, 0x3c040800, 0x8c830020, 0x10430004,
+ 0x00000000, 0xaf830004, 0x0e00110b, 0x00000000, 0x8f500000, 0x32020007,
+ 0x1040fff5, 0x32020001, 0x1040002b, 0x32020002, 0x8f420100, 0xaf420020,
+ 0x8f430104, 0xaf4300a8, 0x9342010b, 0x93630000, 0x306300ff, 0x10710005,
+ 0x304400ff, 0x10750006, 0x2c820016, 0x0a000227, 0x00000000, 0xaf940000,
+ 0x0a000228, 0x2c820016, 0xaf930000, 0x0a000228, 0x00000000, 0xaf800000,
+ 0x14400005, 0x00041880, 0x0e0002b2, 0x00000000, 0x0a000234, 0x00000000,
+ 0x3c020800, 0x24424600, 0x00621821, 0x8c620000, 0x0040f809, 0x00000000,
+ 0x10400005, 0x8fc20034, 0x8f420104, 0x3c016020, 0xac220014, 0x8fc20034,
+ 0xaf520138, 0x24420001, 0xafc20034, 0x32020002, 0x10400019, 0x32020004,
+ 0x8f420140, 0xaf420020, 0x93630000, 0x306300ff, 0x10710005, 0x00000000,
+ 0x10750006, 0x00000000, 0x0a000250, 0x00000000, 0xaf940000, 0x0a000251,
+ 0x00000000, 0xaf930000, 0x0a000251, 0x00000000, 0xaf800000, 0x0e0008b9,
+ 0x00000000, 0x8ee20038, 0xaf520178, 0x24420001, 0xaee20038, 0x32020004,
+ 0x1040ffad, 0x00000000, 0x8f420180, 0xaf420020, 0x93630000, 0x306300ff,
+ 0x10710005, 0x00000000, 0x10750006, 0x00000000, 0x0a00026a, 0x00000000,
+ 0xaf940000, 0x0a00026b, 0x00000000, 0xaf930000, 0x0a00026b, 0x00000000,
+ 0xaf800000, 0x93620000, 0x14510004, 0x8ec2003c, 0x0e000835, 0x00000000,
+ 0x8ec2003c, 0xaf5201b8, 0x24420001, 0x0a000206, 0xaec2003c, 0x27bdffe8,
+ 0xafbf0010, 0x97420108, 0x24033000, 0x30447000, 0x10830012, 0x28823001,
+ 0x10400007, 0x24024000, 0x1080000b, 0x24022000, 0x1082001a, 0x24020001,
+ 0x0a000299, 0x00000000, 0x1082000c, 0x24025000, 0x1082000e, 0x00000000,
+ 0x0a000299, 0x00000000, 0x0000000d, 0x0a00029b, 0x00001021, 0x0e000300,
+ 0x00000000, 0x0a00029b, 0x00001021, 0x0e00048f, 0x00000000, 0x0a00029b,
+ 0x00001021, 0x0e000fdf, 0x00000000, 0x0a00029b, 0x00001021, 0x0000000d,
+ 0x00001021, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x93620000, 0x24030020,
+ 0x304400ff, 0x10830005, 0x24020030, 0x10820007, 0x00000000, 0x0a0002af,
+ 0x00000000, 0x2782000c, 0xaf820000, 0x03e00008, 0x00000000, 0x27820008,
+ 0xaf820000, 0x03e00008, 0x00000000, 0xaf800000, 0x03e00008, 0x00000000,
+ 0x0000000d, 0x03e00008, 0x00001021, 0x03e00008, 0x00001021, 0x27440100,
+ 0x94830008, 0x30620004, 0x10400017, 0x30620002, 0x8f4202b8, 0x04430007,
+ 0x8c820020, 0x3c040800, 0x8c830060, 0x24020001, 0x24630001, 0x03e00008,
+ 0xac830060, 0xaf420280, 0x94830016, 0x3c060800, 0xa7430284, 0x8c850004,
+ 0x8cc4005c, 0x00001021, 0x3c031000, 0x24840001, 0xaf450288, 0xaf4302b8,
+ 0x03e00008, 0xacc4005c, 0x14400003, 0x3c040800, 0x03e00008, 0x00001021,
+ 0x8c830084, 0x24020001, 0x24630001, 0x03e00008, 0xac830084, 0x27450100,
+ 0x3c040800, 0x8c820088, 0x94a3000c, 0x24420001, 0x007a1821, 0xac820088,
+ 0x8ca40018, 0x90664000, 0xaf440038, 0x8ca2001c, 0x2403fff8, 0x00063600,
+ 0x00431024, 0x34420004, 0x3c030005, 0xaf42003c, 0xaf430030, 0x00000000,
+ 0x00000000, 0x00000000, 0xaf460404, 0x00000000, 0x00000000, 0x00000000,
+ 0x3c020006, 0x34420001, 0xaf420030, 0x00000000, 0x00000000, 0x00000000,
+ 0x8f420000, 0x30420010, 0x1040fffd, 0x00001021, 0x03e00008, 0x00000000,
+ 0x3c020800, 0x8c430020, 0x27bdffe8, 0xafb00010, 0x27500100, 0x1060001e,
+ 0xafbf0014, 0x0e001006, 0x00000000, 0x8f830018, 0x8e020018, 0xac620000,
+ 0x8f840018, 0x9602000c, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018,
+ 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, 0x8f840018,
+ 0x3c026000, 0x8c434448, 0xac830018, 0x96020008, 0x3c030800, 0x9464466e,
+ 0x8f850018, 0x00021400, 0x00441025, 0x24040001, 0x0e001044, 0xaca2001c,
+ 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x27bdffc8, 0xafb3001c,
+ 0x00009821, 0xafb7002c, 0x0000b821, 0xafbe0030, 0x0000f021, 0xafb50024,
+ 0x27550100, 0xafbf0034, 0xafb60028, 0xafb40020, 0xafb20018, 0xafb10014,
+ 0xafb00010, 0x96a20008, 0x8f540100, 0x8eb20018, 0x30420001, 0x10400037,
+ 0x02a0b021, 0x8f630054, 0x2642ffff, 0x00431023, 0x18400006, 0x00000000,
+ 0x0000000d, 0x00000000, 0x24000128, 0x0a000372, 0x00002021, 0x8f62004c,
+ 0x02421023, 0x18400028, 0x00002021, 0x93650120, 0x93640121, 0x3c030800,
+ 0x8c62008c, 0x308400ff, 0x24420001, 0x30a500ff, 0x00803821, 0x1485000b,
+ 0xac62008c, 0x3c040800, 0x8c830090, 0x24630001, 0xac830090, 0x93620122,
+ 0x30420001, 0x00021023, 0x30420005, 0x0a000372, 0x34440004, 0x27660100,
+ 0x00041080, 0x00c21021, 0x8c430000, 0x02431823, 0x04600004, 0x24820001,
+ 0x30440007, 0x1485fff9, 0x00041080, 0x10870007, 0x3c030800, 0xa3640121,
+ 0x8c620094, 0x24040005, 0x24420001, 0x0a000372, 0xac620094, 0x24040004,
+ 0x00809821, 0x9362003f, 0x304400ff, 0x38830016, 0x2c630001, 0x38820010,
+ 0x2c420001, 0x00621825, 0x1460000c, 0x24020001, 0x38830008, 0x2c630001,
+ 0x38820014, 0x2c420001, 0x00621825, 0x14600005, 0x24020001, 0x24020012,
+ 0x14820002, 0x00001021, 0x24020001, 0x50400007, 0x8eb10020, 0x8ea20020,
+ 0x8f630040, 0x00408821, 0x00431023, 0x5c400001, 0x8f710040, 0x9343010b,
+ 0x24020004, 0x54620005, 0x36730080, 0x96a20008, 0x36730002, 0x24170001,
+ 0x305e0020, 0x2402fffb, 0x02628024, 0x1200002a, 0x3c030800, 0x8c620030,
+ 0x02021024, 0x10400026, 0x3c020800, 0x8c430020, 0x10600024, 0x32620004,
+ 0x0e001006, 0x00000000, 0x8f830018, 0x8f420100, 0xac620000, 0x8f840018,
+ 0x02201821, 0x32620002, 0xac900004, 0x8f840018, 0x50400001, 0x8ec30014,
+ 0xac830008, 0x8f830018, 0x8ec20020, 0xac62000c, 0x8f840018, 0x8f620040,
+ 0xac820010, 0x8f830018, 0x8ec20018, 0xac620014, 0x8f840018, 0x3c026000,
+ 0x8c434448, 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c024010,
+ 0x00621825, 0xac83001c, 0x0e001044, 0x24040001, 0x32620004, 0x10400076,
+ 0x00003821, 0x3c029000, 0x34420001, 0x3c038000, 0x02821025, 0xa360007c,
+ 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620023,
+ 0x30420080, 0x10400011, 0x00000000, 0x8f65005c, 0x8f63004c, 0x9764003c,
+ 0x8f620064, 0x00a32823, 0x00852821, 0x00a2102b, 0x54400006, 0x3c023fff,
+ 0x93620023, 0x3042007f, 0xa3620023, 0xaf720064, 0x3c023fff, 0x0a0003f1,
+ 0x3442ffff, 0x8f62005c, 0x02421023, 0x04400011, 0x00000000, 0x8f65005c,
+ 0x8f630064, 0x9764003c, 0x3c023fff, 0x3442ffff, 0xaf720064, 0x00a32823,
+ 0x00852821, 0x0045102b, 0x10400004, 0x02451021, 0x3c053fff, 0x34a5ffff,
+ 0x02451021, 0xaf62005c, 0x24070001, 0xaf72004c, 0x8f620054, 0x16420005,
+ 0x00000000, 0x93620023, 0x30420040, 0x10400017, 0x24020001, 0x9762006a,
+ 0x00022880, 0x50a00001, 0x24050001, 0x97630068, 0x93640081, 0x3c020800,
+ 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021,
+ 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, 0x8f420074,
+ 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, 0x34420001,
+ 0x02821025, 0xa3600081, 0xaf420020, 0x9363007e, 0x9362007a, 0x10620004,
+ 0x00000000, 0x0e000f2a, 0x00000000, 0x00403821, 0x10e00017, 0x3c029000,
+ 0x34420001, 0x02821025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024,
+ 0x1440fffd, 0x3c028000, 0x9363007d, 0x34420001, 0x3c048000, 0x02821025,
+ 0xa363007d, 0xaf420020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002,
+ 0x3c031000, 0xaf5401c0, 0xa34201c4, 0xaf4301f8, 0x8ea30014, 0x8f620040,
+ 0x14430003, 0x00431023, 0x0a000443, 0x00001021, 0x28420001, 0x10400034,
+ 0x00000000, 0x8f620040, 0xaf630040, 0x9362003e, 0x30420001, 0x1440000b,
+ 0x3c029000, 0x93620022, 0x24420001, 0xa3620022, 0x93630022, 0x3c020800,
+ 0x8c440098, 0x0064182b, 0x1460001e, 0x3c020800, 0x3c029000, 0x34420001,
+ 0x02821025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd,
+ 0x00000000, 0x3c038000, 0x9362007d, 0x34630001, 0x3c048000, 0x02831825,
+ 0x34420001, 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd,
+ 0x24020002, 0x3c031000, 0xaf5401c0, 0xa34201c4, 0x24020001, 0xaf4301f8,
+ 0xa7620012, 0x0a000476, 0xa3600022, 0x9743007a, 0x9444002a, 0x00641821,
+ 0x3063fffe, 0xa7630012, 0x0e000b68, 0x00000000, 0x12e00003, 0x00000000,
+ 0x0e000f27, 0x00000000, 0x53c00004, 0x96a20008, 0x0e000c10, 0x00000000,
+ 0x96a20008, 0x8fbf0034, 0x8fbe0030, 0x8fb7002c, 0x8fb60028, 0x8fb50024,
+ 0x8fb40020, 0x8fb3001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x00021042,
+ 0x30420001, 0x03e00008, 0x27bd0038, 0x27bdffe8, 0xafbf0010, 0x97420108,
+ 0x2403000b, 0x304400ff, 0x1083004e, 0x2882000c, 0x10400011, 0x24020006,
+ 0x1082003e, 0x28820007, 0x10400007, 0x28820008, 0x1080002b, 0x24020001,
+ 0x1082002e, 0x3c026000, 0x0a000504, 0x00000000, 0x14400061, 0x2882000a,
+ 0x1440002b, 0x00000000, 0x0a0004ec, 0x00000000, 0x2402001c, 0x1082004e,
+ 0x2882001d, 0x1040000e, 0x24020019, 0x10820041, 0x2882001a, 0x10400005,
+ 0x2402000e, 0x10820036, 0x00000000, 0x0a000504, 0x00000000, 0x2402001b,
+ 0x1082003c, 0x00000000, 0x0a000504, 0x00000000, 0x240200c1, 0x10820040,
+ 0x288200c2, 0x10400005, 0x24020080, 0x1082001f, 0x00000000, 0x0a000504,
+ 0x00000000, 0x240200c2, 0x1082003b, 0x00000000, 0x0a000504, 0x00000000,
+ 0x3c026000, 0x0e000c7d, 0xac400808, 0x0a000506, 0x8fbf0010, 0x8c444448,
+ 0x3c030800, 0xac640064, 0x0e000c7d, 0x00000000, 0x3c026000, 0x8c444448,
+ 0x3c030800, 0x0a000505, 0xac640068, 0x8f440100, 0x0e000508, 0x00000000,
+ 0x3c026000, 0x8c444448, 0x3c030800, 0x0a000505, 0xac64006c, 0x0e000cab,
+ 0x00000000, 0x0a000506, 0x8fbf0010, 0x8f440100, 0x0e000cd5, 0x00000000,
+ 0x0a000506, 0x8fbf0010, 0x0e000d1c, 0x00000000, 0x0a000506, 0x8fbf0010,
+ 0x0000000d, 0x0a000506, 0x8fbf0010, 0x0e0005d7, 0x00000000, 0x0a000506,
+ 0x8fbf0010, 0x8f440100, 0x0e000d7e, 0x00000000, 0x0a000506, 0x8fbf0010,
+ 0x0e000e95, 0x00000000, 0x0a000506, 0x8fbf0010, 0x0e000626, 0x00000000,
+ 0x0a000506, 0x8fbf0010, 0x0e000b68, 0x00000000, 0x0a000506, 0x8fbf0010,
+ 0x0000000d, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0x3c029000,
+ 0x34420001, 0xafb00010, 0x00808021, 0x02021025, 0x3c038000, 0xafbf0014,
+ 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005,
+ 0x34420001, 0xa3620005, 0x8f63004c, 0x8f620054, 0x10620019, 0x3c028000,
+ 0x9762006a, 0x00022880, 0x50a00001, 0x24050001, 0x97630068, 0x93640081,
+ 0x3c020800, 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001,
+ 0x00a03021, 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021,
+ 0x8f420074, 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000,
+ 0x34420001, 0x02021025, 0x0e000c7d, 0xaf420020, 0x3c029000, 0x34420001,
+ 0x3c038000, 0x02021025, 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd,
+ 0x3c028000, 0x9363007d, 0x34420001, 0x3c048000, 0x02021025, 0xa363007d,
+ 0xaf420020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x8fbf0014, 0xaf5001c0,
+ 0x8fb00010, 0x24020002, 0x3c031000, 0xa34201c4, 0xaf4301f8, 0x03e00008,
+ 0x27bd0018, 0x27bdffd8, 0xafbf0020, 0xafb3001c, 0xafb20018, 0xafb10014,
+ 0xafb00010, 0x93630005, 0x00809021, 0x24020030, 0x30630030, 0x14620072,
+ 0x00a09821, 0x3c020800, 0x8c430020, 0x1060006c, 0x00000000, 0x0e001006,
+ 0x00000000, 0x8f820018, 0xac520000, 0x9363003e, 0x9362003f, 0x8f840018,
+ 0x00031a00, 0x00431025, 0xac820004, 0x93630081, 0x93620082, 0x8f850018,
+ 0x00031e00, 0x00021400, 0x00621825, 0xaca30008, 0x8f840018, 0x8f620040,
+ 0xac82000c, 0x8f830018, 0x8f620048, 0xac620010, 0x8f840018, 0x8f62004c,
+ 0x3c110800, 0xac820014, 0x8f830018, 0x8f620050, 0x26304660, 0x00002021,
+ 0xac620018, 0x9602000e, 0x8f850018, 0x3c03c00b, 0x00431025, 0x0e001044,
+ 0xaca2001c, 0x8f830018, 0x8f620054, 0xac620000, 0x8f840018, 0x8f620058,
+ 0xac820004, 0x8f830018, 0x8f62005c, 0xac620008, 0x8f840018, 0x8f620060,
+ 0xac82000c, 0x8f850018, 0x8f620064, 0xaca20010, 0x97630068, 0x9762006a,
+ 0x8f840018, 0x00031c00, 0x00431025, 0xac820014, 0x8f830018, 0x00002021,
+ 0xac600018, 0x9602000e, 0x8f850018, 0x3c03c00c, 0x00431025, 0x0e001044,
+ 0xaca2001c, 0x8f840018, 0x8f630018, 0xac830000, 0x936200c4, 0x30420002,
+ 0x10400006, 0x00000000, 0x976200c8, 0x8f830018, 0x3042ffff, 0x0a0005b5,
+ 0xac620004, 0x8f820018, 0xac400004, 0x8f830018, 0x8f62006c, 0xac620008,
+ 0x8f840018, 0x8f6200dc, 0xac82000c, 0x8f830018, 0xac600010, 0x93620005,
+ 0x8f830018, 0x00021600, 0x00531025, 0xac620014, 0x8f850018, 0x3c026000,
+ 0x8c434448, 0x24040001, 0x26224660, 0xaca30018, 0x9443000e, 0x8f850018,
+ 0x3c02400d, 0x00621825, 0x0e001044, 0xaca3001c, 0x0e000d48, 0x02402021,
+ 0x8fbf0020, 0x8fb3001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x03e00008,
+ 0x27bd0028, 0x27bdffe0, 0xafb00010, 0x27500100, 0xafbf0018, 0xafb10014,
+ 0x9603000c, 0x240200c1, 0x5462001d, 0x8e040000, 0x3c029000, 0x8f440100,
+ 0x34420001, 0x3c038000, 0x00821025, 0xaf420020, 0x8f420020, 0x00431024,
+ 0x1440fffd, 0x00000000, 0x3c038000, 0x9362007d, 0x34630001, 0x3c058000,
+ 0x00831825, 0x34420004, 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00451024,
+ 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4401c0, 0xa34201c4, 0xaf4301f8,
+ 0x0a000622, 0x8fbf0018, 0x8f65004c, 0x24060001, 0x0e000db5, 0x2407049f,
+ 0x3c020800, 0x8c430020, 0x9611000c, 0x1060001d, 0x8e100000, 0x0e001006,
+ 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x00111400, 0xac820004,
+ 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010,
+ 0x8f840018, 0x240204a2, 0xac820014, 0x8f850018, 0x3c026000, 0x8c434448,
+ 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024019,
+ 0x00621825, 0x0e001044, 0xaca3001c, 0x8fbf0018, 0x8fb10014, 0x8fb00010,
+ 0x03e00008, 0x27bd0020, 0x27bdffb0, 0xafb1002c, 0x27510100, 0xafbf004c,
+ 0xafbe0048, 0xafb70044, 0xafb60040, 0xafb5003c, 0xafb40038, 0xafb30034,
+ 0xafb20030, 0xafb00028, 0x8e350000, 0x9634000c, 0x3c026000, 0x8c434448,
+ 0x0000f021, 0xaf630170, 0x8f620040, 0x8e230014, 0x0000b821, 0x00431023,
+ 0x044001ec, 0x0000b021, 0x32820010, 0x1040002e, 0x3c026000, 0x9363003f,
+ 0x9222000e, 0x10430006, 0x2402000c, 0x9223000f, 0x10620003, 0x24020014,
+ 0x14620025, 0x3c026000, 0x32820004, 0x10400007, 0x241e0001, 0x8f620050,
+ 0x24420001, 0xaf620050, 0x8f630054, 0x24630001, 0xaf630054, 0x32830102,
+ 0x24020002, 0x5462000d, 0x9222000f, 0x8f620040, 0x24420001, 0xaf620040,
+ 0x8f630048, 0x8f620040, 0x24630001, 0x54620005, 0x9222000f, 0x8f620048,
+ 0x24420001, 0xaf620048, 0x9222000f, 0xa362003f, 0x9223000f, 0x24020012,
+ 0x14620007, 0x3c026000, 0x3c030800, 0x8c620074, 0x24420001, 0x0e000f6e,
+ 0xac620074, 0x3c026000, 0x8c434448, 0x32820040, 0xaf630174, 0x32830020,
+ 0xafa30010, 0x32830080, 0xafa30014, 0x32830001, 0xafa3001c, 0x32830008,
+ 0xafa30020, 0x32830100, 0x104000bb, 0xafa30018, 0x8e260010, 0x8f630054,
+ 0x24c2ffff, 0x00431023, 0x18400006, 0x00000000, 0x0000000d, 0x00000000,
+ 0x24000128, 0x0a0006b2, 0x00009021, 0x8f62004c, 0x00c21023, 0x18400028,
+ 0x00009021, 0x93650120, 0x93640121, 0x3c030800, 0x8c62008c, 0x308400ff,
+ 0x24420001, 0x30a500ff, 0x00804021, 0x1485000b, 0xac62008c, 0x3c040800,
+ 0x8c830090, 0x24630001, 0xac830090, 0x93620122, 0x30420001, 0x00021023,
+ 0x30420005, 0x0a0006b2, 0x34520004, 0x27670100, 0x00041080, 0x00e21021,
+ 0x8c430000, 0x00c31823, 0x04600004, 0x24820001, 0x30440007, 0x1485fff9,
+ 0x00041080, 0x10880007, 0x3c030800, 0xa3640121, 0x8c620094, 0x24120005,
+ 0x24420001, 0x0a0006b2, 0xac620094, 0x24120004, 0x32420001, 0x10400020,
+ 0x3c020800, 0x8c430020, 0x8e300000, 0x1060001c, 0x8e330010, 0x0e001006,
+ 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x24020001, 0xac820004,
+ 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010,
+ 0x8f820018, 0xac530014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001,
+ 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024010, 0x00621825,
+ 0x0e001044, 0xaca3001c, 0x32420004, 0x10400060, 0x00003821, 0x3c029000,
+ 0x8e260010, 0x34420001, 0x3c038000, 0x02a21025, 0xa360007c, 0xaf420020,
+ 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620023, 0x30420080,
+ 0x10400011, 0x00000000, 0x8f65005c, 0x8f63004c, 0x9764003c, 0x8f620064,
+ 0x00a32823, 0x00852821, 0x00a2102b, 0x54400006, 0x3c023fff, 0x93620023,
+ 0x3042007f, 0xa3620023, 0xaf660064, 0x3c023fff, 0x0a000702, 0x3442ffff,
+ 0x8f62005c, 0x00c21023, 0x04400011, 0x00000000, 0x8f65005c, 0x8f630064,
+ 0x9764003c, 0x3c023fff, 0x3442ffff, 0xaf660064, 0x00a32823, 0x00852821,
+ 0x0045102b, 0x10400004, 0x00c51021, 0x3c053fff, 0x34a5ffff, 0x00c51021,
+ 0xaf62005c, 0x24070001, 0xaf66004c, 0x8f620054, 0x14c20005, 0x00000000,
+ 0x93620023, 0x30420040, 0x10400017, 0x24020001, 0x9762006a, 0x00022880,
+ 0x50a00001, 0x24050001, 0x97630068, 0x93640081, 0x3c020800, 0x8c46004c,
+ 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, 0x3c020800,
+ 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, 0x8f420074, 0x2403fffe,
+ 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, 0x34420001, 0x02a21025,
+ 0xa3600081, 0xaf420020, 0x9363007e, 0x9362007a, 0x10620005, 0x00e0b021,
+ 0x0e000f2a, 0x00000000, 0x00403821, 0x00e0b021, 0x8fa20010, 0x10400008,
+ 0x00000000, 0x8e220018, 0xaf620018, 0x8e23001c, 0xaf63001c, 0x8e220020,
+ 0x24160001, 0xaf620058, 0x13c00036, 0x32820004, 0x10400035, 0x8fa30014,
+ 0x93620023, 0x30420040, 0x10400031, 0x3c020800, 0x8c430020, 0x1060001c,
+ 0x8e300000, 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, 0x8f830018,
+ 0xac600004, 0x8f820018, 0xac400008, 0x8f830018, 0xac60000c, 0x8f820018,
+ 0xac400010, 0x8f830018, 0x24020587, 0xac620014, 0x8f850018, 0x3c026000,
+ 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018,
+ 0x3c024019, 0x00621825, 0x0e001044, 0xaca3001c, 0x3c029000, 0x34420001,
+ 0x02a21025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd,
+ 0x24020001, 0xaf62000c, 0x93630023, 0x3c028000, 0x34420001, 0x02a21025,
+ 0x306300bf, 0xa3630023, 0xaf420020, 0x8fa30014, 0x10600012, 0x8fa3001c,
+ 0x9362007c, 0x24420001, 0xa362007c, 0x9363007e, 0x9362007a, 0x1462000b,
+ 0x8fa3001c, 0x9362007c, 0x3c030800, 0x8c640024, 0x0044102b, 0x14400005,
+ 0x8fa3001c, 0x0e000f2a, 0x00000000, 0x02c2b025, 0x8fa3001c, 0x3062ffff,
+ 0x10400003, 0x32820200, 0x0a000793, 0x24170004, 0x10400003, 0x00000000,
+ 0x24170040, 0x24160001, 0x13c0005d, 0x32820002, 0x1040005c, 0x8fa20020,
+ 0x9222000a, 0x30420020, 0x10400033, 0x3c100800, 0x93620023, 0x30420040,
+ 0x1040002f, 0x8e020020, 0x1040001e, 0x3c029000, 0x0e001006, 0x00000000,
+ 0x8f820018, 0xac550000, 0x8f840018, 0x3c02008d, 0xac820004, 0x8f830018,
+ 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f840018,
+ 0x240205bf, 0xac820014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001,
+ 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024019, 0x00621825,
+ 0x0e001044, 0xaca3001c, 0x3c029000, 0x34420001, 0x02a21025, 0xaf420020,
+ 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93630023,
+ 0x3c028000, 0x34420001, 0x02a21025, 0x306300bf, 0xa3630023, 0xaf420020,
+ 0x8e020020, 0x10400023, 0x8fa20020, 0x0e001006, 0x00000000, 0x8f840018,
+ 0x8e230000, 0xac830000, 0x9222000a, 0x8f830018, 0x00021600, 0xac620004,
+ 0x8f840018, 0x8f620040, 0xac820008, 0x8f850018, 0x8f63004c, 0xaca3000c,
+ 0x9362003f, 0x8f840018, 0x304200ff, 0xac820010, 0x8f830018, 0x3c026000,
+ 0xac600014, 0x8f850018, 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018,
+ 0x9443466e, 0x8f850018, 0x3c02401a, 0x00621825, 0x0e001044, 0xaca3001c,
+ 0x8fa20020, 0x1040000e, 0x8fa20018, 0x9222000a, 0xa3620082, 0x56e00005,
+ 0x36f70008, 0x8fa30018, 0x10600004, 0x00000000, 0x36f70008, 0x0a000801,
+ 0x24160001, 0x0e000de1, 0x02a02021, 0x8fa20018, 0x10400003, 0x00000000,
+ 0x36f70010, 0x24160001, 0x12c00019, 0x3c029000, 0x34420001, 0x02a21025,
+ 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000,
+ 0x3c038000, 0x9362007d, 0x34630001, 0x3c048000, 0x02a31825, 0x02e21025,
+ 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002,
+ 0x3c031000, 0xaf5501c0, 0xa34201c4, 0xaf4301f8, 0x9363003f, 0x24020012,
+ 0x14620004, 0x3c026000, 0x0e000f6e, 0x00000000, 0x3c026000, 0x8c434448,
+ 0xaf630178, 0x8fbf004c, 0x8fbe0048, 0x8fb70044, 0x8fb60040, 0x8fb5003c,
+ 0x8fb40038, 0x8fb30034, 0x8fb20030, 0x8fb1002c, 0x8fb00028, 0x03e00008,
+ 0x27bd0050, 0x27bdffe8, 0xafbf0014, 0xafb00010, 0x8f500180, 0x97420184,
+ 0x30420200, 0x14400015, 0x00000000, 0x8f430188, 0x3c02ff00, 0x00621824,
+ 0x3c020200, 0x10620031, 0x0043102b, 0x14400007, 0x3c020300, 0x1060000b,
+ 0x3c020100, 0x1062000d, 0x00000000, 0x0a0008b4, 0x00000000, 0x10620027,
+ 0x3c020400, 0x1062003e, 0x02002021, 0x0a0008b4, 0x00000000, 0x0e000e1e,
+ 0x02002021, 0x0a0008b6, 0x8fbf0014, 0x93620005, 0x30420020, 0x1440005e,
+ 0x8fbf0014, 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, 0x3c038000,
+ 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, 0x3c038000,
+ 0x34630001, 0x02031825, 0x34420020, 0xa3620005, 0xaf430020, 0x93620005,
+ 0x30420020, 0x14400003, 0x02002021, 0x0000000d, 0x02002021, 0x0e000553,
+ 0x24055854, 0x0a0008b6, 0x8fbf0014, 0x93620005, 0x30420001, 0x1040003f,
+ 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, 0x3c038000, 0x8f420020,
+ 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, 0x3c048000, 0x3c030800,
+ 0x304200fe, 0xa3620005, 0x8c620020, 0x34840001, 0x02042025, 0xaf440020,
+ 0x1040002d, 0x8fbf0014, 0x0a000894, 0x00000000, 0x00002821, 0x00003021,
+ 0x0e000f78, 0x240706a4, 0x3c020800, 0x8c430020, 0x10600023, 0x8fbf0014,
+ 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, 0x93630082, 0x9362003f,
+ 0x8f840018, 0x00031a00, 0x00431025, 0xac820004, 0x8f830018, 0xac600008,
+ 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, 0xac400014,
+ 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018,
+ 0x9443466e, 0x8f850018, 0x3c02400a, 0x00621825, 0x0e001044, 0xaca3001c,
+ 0x0a0008b6, 0x8fbf0014, 0x0000000d, 0x8fbf0014, 0x8fb00010, 0x03e00008,
+ 0x27bd0018, 0x27bdffe8, 0xafbf0010, 0x93420148, 0x2444ffff, 0x2c830005,
+ 0x10600047, 0x3c020800, 0x24424598, 0x00041880, 0x00621821, 0x8c640000,
+ 0x00800008, 0x00000000, 0x8f430144, 0x8f62000c, 0x14620006, 0x24020001,
+ 0xaf62000c, 0x0e000909, 0x00000000, 0x0a000907, 0x8fbf0010, 0x8f62000c,
+ 0x0a000900, 0x00000000, 0x97630010, 0x8f420144, 0x14430006, 0x24020001,
+ 0xa7620010, 0x0e000eeb, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620010,
+ 0x0a000900, 0x00000000, 0x97630012, 0x8f420144, 0x14430006, 0x24020001,
+ 0xa7620012, 0x0e000f06, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620012,
+ 0x0a000900, 0x00000000, 0x97630014, 0x8f420144, 0x14430006, 0x24020001,
+ 0xa7620014, 0x0e000f21, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620014,
+ 0x0a000900, 0x00000000, 0x97630016, 0x8f420144, 0x14430006, 0x24020001,
+ 0xa7620016, 0x0e000f24, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620016,
+ 0x14400006, 0x8fbf0010, 0x3c030800, 0x8c620070, 0x24420001, 0xac620070,
+ 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0xafbf0010, 0x93620081,
+ 0x3c030800, 0x8c640048, 0x0044102b, 0x14400028, 0x3c029000, 0x8f460140,
+ 0x34420001, 0x3c038000, 0x00c21025, 0xaf420020, 0x8f420020, 0x00431024,
+ 0x1440fffd, 0x3c048000, 0x34840001, 0x3c059000, 0x34a50001, 0x3c078000,
+ 0x24020012, 0x24030080, 0x00c42025, 0x00c52825, 0xa362003f, 0xa3630082,
+ 0xaf440020, 0xaf450020, 0x8f420020, 0x00471024, 0x1440fffd, 0x3c038000,
+ 0x9362007d, 0x34630001, 0x3c048000, 0x00c31825, 0x34420020, 0xa362007d,
+ 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000,
+ 0x0a00096d, 0xaf4601c0, 0x93620081, 0x24420001, 0x0e000f2a, 0xa3620081,
+ 0x9763006a, 0x00032880, 0x14a00002, 0x00403821, 0x24050001, 0x97630068,
+ 0x93640081, 0x3c020800, 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b,
+ 0x54400001, 0x00a03021, 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001,
+ 0x00c02021, 0x8f420074, 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c,
+ 0x10e0001a, 0x3c029000, 0x8f440140, 0x34420001, 0x3c038000, 0x00821025,
+ 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000,
+ 0x9362007d, 0x34630001, 0x3c058000, 0x00831825, 0x34420004, 0xa362007d,
+ 0xaf430020, 0x8f4201f8, 0x00451024, 0x1440fffd, 0x24020002, 0x3c031000,
+ 0xaf4401c0, 0xa34201c4, 0xaf4301f8, 0x8fbf0010, 0x03e00008, 0x27bd0018,
+ 0x27bdffd8, 0xafb3001c, 0x27530100, 0xafbf0024, 0xafb40020, 0xafb20018,
+ 0xafb10014, 0xafb00010, 0x96620008, 0x3c140800, 0x8f520100, 0x30420001,
+ 0x104000cf, 0x00000000, 0x8e700018, 0x8f630054, 0x2602ffff, 0x00431023,
+ 0x18400006, 0x00000000, 0x0000000d, 0x00000000, 0x24000128, 0x0a0009b6,
+ 0x00008821, 0x8f62004c, 0x02021023, 0x18400028, 0x00008821, 0x93650120,
+ 0x93640121, 0x3c030800, 0x8c62008c, 0x308400ff, 0x24420001, 0x30a500ff,
+ 0x00803821, 0x1485000b, 0xac62008c, 0x3c040800, 0x8c830090, 0x24630001,
+ 0xac830090, 0x93620122, 0x30420001, 0x00021023, 0x30420005, 0x0a0009b6,
+ 0x34510004, 0x27660100, 0x00041080, 0x00c21021, 0x8c430000, 0x02031823,
+ 0x04600004, 0x24820001, 0x30440007, 0x1485fff9, 0x00041080, 0x10870007,
+ 0x3c030800, 0xa3640121, 0x8c620094, 0x24110005, 0x24420001, 0x0a0009b6,
+ 0xac620094, 0x24110004, 0x32220001, 0x1040001e, 0x8e820020, 0x1040001d,
+ 0x32220004, 0x0e001006, 0x00000000, 0x8f820018, 0xac520000, 0x8f840018,
+ 0x24020001, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c,
+ 0x8f830018, 0xac600010, 0x8f820018, 0xac500014, 0x8f850018, 0x3c026000,
+ 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018,
+ 0x3c024010, 0x00621825, 0x0e001044, 0xaca3001c, 0x32220004, 0x10400076,
+ 0x00003821, 0x3c029000, 0x34420001, 0x3c038000, 0x02421025, 0xa360007c,
+ 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620023,
+ 0x30420080, 0x10400011, 0x00000000, 0x8f65005c, 0x8f63004c, 0x9764003c,
+ 0x8f620064, 0x00a32823, 0x00852821, 0x00a2102b, 0x54400006, 0x3c023fff,
+ 0x93620023, 0x3042007f, 0xa3620023, 0xaf700064, 0x3c023fff, 0x0a000a03,
+ 0x3442ffff, 0x8f62005c, 0x02021023, 0x04400011, 0x00000000, 0x8f65005c,
+ 0x8f630064, 0x9764003c, 0x3c023fff, 0x3442ffff, 0xaf700064, 0x00a32823,
+ 0x00852821, 0x0045102b, 0x10400004, 0x02051021, 0x3c053fff, 0x34a5ffff,
+ 0x02051021, 0xaf62005c, 0x24070001, 0xaf70004c, 0x8f620054, 0x16020005,
+ 0x00000000, 0x93620023, 0x30420040, 0x10400017, 0x24020001, 0x9762006a,
+ 0x00022880, 0x50a00001, 0x24050001, 0x97630068, 0x93640081, 0x3c020800,
+ 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021,
+ 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, 0x8f420074,
+ 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, 0x34420001,
+ 0x02421025, 0xa3600081, 0xaf420020, 0x9363007e, 0x9362007a, 0x10620004,
+ 0x00000000, 0x0e000f2a, 0x00000000, 0x00403821, 0x10e00017, 0x3c029000,
+ 0x34420001, 0x02421025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024,
+ 0x1440fffd, 0x3c028000, 0x9363007d, 0x34420001, 0x3c048000, 0x02421025,
+ 0xa363007d, 0xaf420020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002,
+ 0x3c031000, 0xaf5201c0, 0xa34201c4, 0xaf4301f8, 0x9342010b, 0x8e830020,
+ 0x27500100, 0x38420006, 0x10600029, 0x2c510001, 0x0e001006, 0x00000000,
+ 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, 0x96020008, 0xac820004,
+ 0x8f830018, 0x8e020014, 0xac620008, 0x8f850018, 0x3c026000, 0x8c434448,
+ 0xaca3000c, 0x8f840018, 0x96020012, 0xac820010, 0x8f850018, 0x8e030020,
+ 0xaca30014, 0x9602000c, 0x9603000e, 0x8f840018, 0x00021400, 0x00431025,
+ 0xac820018, 0x12200005, 0x3c020800, 0x9443466e, 0x8f840018, 0x0a000a78,
+ 0x3c024013, 0x9443466e, 0x8f840018, 0x3c024014, 0x00621825, 0xac83001c,
+ 0x0e001044, 0x24040001, 0x8e630014, 0x8f620040, 0x14430003, 0x00431023,
+ 0x0a000a83, 0x00001021, 0x28420001, 0x10400034, 0x00000000, 0x8f620040,
+ 0xaf630040, 0x9362003e, 0x30420001, 0x1440000b, 0x3c029000, 0x93620022,
+ 0x24420001, 0xa3620022, 0x93630022, 0x3c020800, 0x8c440098, 0x0064182b,
+ 0x1460001e, 0x3c020800, 0x3c029000, 0x34420001, 0x02421025, 0xaf420020,
+ 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000,
+ 0x9362007d, 0x34630001, 0x3c048000, 0x02431825, 0x34420001, 0xa362007d,
+ 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000,
+ 0xaf5201c0, 0xa34201c4, 0x24020001, 0xaf4301f8, 0xa7620012, 0x0a000ab6,
+ 0xa3600022, 0x9743007a, 0x9444002a, 0x00641821, 0x3063fffe, 0xa7630012,
+ 0x0e000b68, 0x00000000, 0x97420108, 0x8fbf0024, 0x8fb40020, 0x8fb3001c,
+ 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x00021042, 0x30420001, 0x03e00008,
+ 0x27bd0028, 0x27bdffe0, 0xafb20018, 0x3c120800, 0x8e420020, 0xafb00010,
+ 0x27500100, 0xafbf001c, 0x10400046, 0xafb10014, 0x0e001006, 0x00000000,
+ 0x8f840018, 0x8e020000, 0xac820000, 0x936300b1, 0x936200c5, 0x8f850018,
+ 0x00031e00, 0x00021400, 0x34420100, 0x00621825, 0xaca30004, 0x8f840018,
+ 0x8e02001c, 0xac820008, 0x8f830018, 0x8f620048, 0xac62000c, 0x8f840018,
+ 0x96020012, 0xac820010, 0x8f830018, 0x8f620040, 0x24040001, 0xac620014,
+ 0x8f850018, 0x3c026000, 0x8c434448, 0x3c020800, 0x24514660, 0xaca30018,
+ 0x9623000e, 0x8f850018, 0x3c024016, 0x00621825, 0x0e001044, 0xaca3001c,
+ 0x96030008, 0x30630010, 0x1060001c, 0x8e420020, 0x1040001a, 0x8e100000,
+ 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, 0x8f830018, 0xac600004,
+ 0x8f820018, 0xac400008, 0x8f830018, 0xac60000c, 0x8f820018, 0xac400010,
+ 0x8f830018, 0xac600014, 0x8f850018, 0x3c036000, 0x8c634448, 0x24040001,
+ 0xaca30018, 0x9622000e, 0x8f850018, 0x3c034015, 0x00431025, 0x0e001044,
+ 0xaca2001c, 0x00001021, 0x8fbf001c, 0x8fb20018, 0x8fb10014, 0x8fb00010,
+ 0x03e00008, 0x27bd0020, 0x27bdffe0, 0xafb20018, 0x3c120800, 0x8e420020,
+ 0xafb00010, 0x27500100, 0xafbf001c, 0x10400041, 0xafb10014, 0x0e001006,
+ 0x00000000, 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, 0x24020100,
+ 0xac820004, 0x8f830018, 0x8e02001c, 0xac620008, 0x8f840018, 0x8e020018,
+ 0xac82000c, 0x8f830018, 0x96020012, 0xac620010, 0x8f840018, 0x96020008,
+ 0xac820014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, 0x3c020800,
+ 0x24514660, 0xaca30018, 0x9623000e, 0x8f850018, 0x3c024017, 0x00621825,
+ 0x0e001044, 0xaca3001c, 0x96030008, 0x30630010, 0x1060001c, 0x8e420020,
+ 0x1040001a, 0x8e100000, 0x0e001006, 0x00000000, 0x8f820018, 0xac500000,
+ 0x8f830018, 0xac600004, 0x8f820018, 0xac400008, 0x8f830018, 0xac60000c,
+ 0x8f820018, 0xac400010, 0x8f830018, 0xac600014, 0x8f850018, 0x3c036000,
+ 0x8c634448, 0x24040001, 0xaca30018, 0x9622000e, 0x8f850018, 0x3c034015,
+ 0x00431025, 0x0e001044, 0xaca2001c, 0x00001021, 0x8fbf001c, 0x8fb20018,
+ 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x27bdffe8, 0xafbf0010,
+ 0x936200c4, 0x30420002, 0x10400019, 0x00000000, 0x936200c5, 0x936300b1,
+ 0x00431023, 0x304400ff, 0x30830080, 0x10600004, 0x00000000, 0x0000000d,
+ 0x00000000, 0x24000a6a, 0x93620004, 0x00441023, 0x304400ff, 0x30830080,
+ 0x10600004, 0x2482ffff, 0x8f650024, 0x0a000b82, 0x00000000, 0x00022b00,
+ 0x8f620024, 0x0045102b, 0x10400002, 0x00000000, 0x8f650024, 0x8f620048,
+ 0x8f630040, 0x00431823, 0x0065202b, 0x10800004, 0x00000000, 0x8f620040,
+ 0x00451021, 0xaf620048, 0x9762003c, 0x0062102b, 0x10400041, 0x8fbf0010,
+ 0x10a0003f, 0x3c029000, 0x34420001, 0x3c040800, 0x8c830080, 0x8f450100,
+ 0x3c068000, 0x24630001, 0x00a21025, 0xac830080, 0xaf420020, 0x8f420020,
+ 0x00461024, 0x1440fffd, 0x3c038000, 0x9362007d, 0x34630001, 0x3c048000,
+ 0x00a31825, 0x34420004, 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00441024,
+ 0x1440fffd, 0x24020002, 0x3c030800, 0xaf4501c0, 0xa34201c4, 0x8c640020,
+ 0x3c021000, 0xaf4201f8, 0x1080001f, 0x8fbf0010, 0x0e001006, 0x00000000,
+ 0x8f830018, 0x8f420100, 0xac620000, 0x8f840018, 0x8f620040, 0xac820004,
+ 0x8f850018, 0x8f620048, 0xaca20008, 0x8f830018, 0xac60000c, 0x8f820018,
+ 0xac400010, 0x8f830018, 0x3c026000, 0xac600014, 0x8f840018, 0x8c434448,
+ 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c0240c2, 0x00621825,
+ 0xac83001c, 0x0e001044, 0x24040001, 0x8fbf0010, 0x03e00008, 0x27bd0018,
+ 0x3c020800, 0x24423958, 0xaf82000c, 0x03e00008, 0x00000000, 0x27bdffe8,
+ 0xafb00010, 0x27500100, 0xafbf0014, 0x8e02001c, 0x14400003, 0x3c020800,
+ 0x0000000d, 0x3c020800, 0x8c430020, 0x10600026, 0x00001021, 0x0e001006,
+ 0x00000000, 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, 0x8e02001c,
+ 0xac820004, 0x8f830018, 0xac600008, 0x8f840018, 0x8e020018, 0xac82000c,
+ 0x8f850018, 0x96020012, 0xaca20010, 0x8f830018, 0x3c106000, 0xac600014,
+ 0x8f840018, 0x8e024448, 0x3c030800, 0xac820018, 0x9462466e, 0x8f840018,
+ 0x3c034012, 0x00431025, 0xac82001c, 0x0e001044, 0x24040001, 0x8e036800,
+ 0x00001021, 0x3c040001, 0x00641825, 0xae036800, 0x0a000c0d, 0x8fbf0014,
+ 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c020800, 0x97430078,
+ 0x9444002e, 0x00001021, 0x00641821, 0x3063fffe, 0x03e00008, 0xa7630010,
+ 0x27450100, 0x8f640048, 0x8ca30018, 0x00641023, 0x18400021, 0x00000000,
+ 0xaf630048, 0x8f620040, 0x9763003c, 0x00821023, 0x0043102a, 0x1040001a,
+ 0x3c029000, 0x8ca40000, 0x34420001, 0x3c038000, 0x00821025, 0xaf420020,
+ 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, 0x9362007d,
+ 0x34630001, 0x3c058000, 0x00831825, 0x34420004, 0xa362007d, 0xaf430020,
+ 0x8f4201f8, 0x00451024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4401c0,
+ 0xa34201c4, 0xaf4301f8, 0x03e00008, 0x00001021, 0x8f420100, 0x34420001,
+ 0xaf4200a4, 0x03e00008, 0x00001021, 0x27bdffe0, 0xafbf0018, 0xafb10014,
+ 0xafb00010, 0x9362007e, 0x30d000ff, 0x16020029, 0x00808821, 0x93620080,
+ 0x16020026, 0x00000000, 0x9362007f, 0x16020023, 0x00000000, 0x9362007a,
+ 0x16020004, 0x00000000, 0x0000000d, 0x00000000, 0x24000771, 0x0e000f49,
+ 0x00000000, 0x3c039000, 0x34630001, 0x3c048000, 0x02231825, 0xa370007a,
+ 0xaf430020, 0x8f420020, 0x00441024, 0x1440fffd, 0x3c028000, 0x9363007d,
+ 0x34420001, 0x3c048000, 0x02221025, 0xa363007d, 0xaf420020, 0x8f4201f8,
+ 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf5101c0, 0xa34201c4,
+ 0xaf4301f8, 0x0a000c79, 0x8fbf0018, 0x0000000d, 0x00000000, 0x24000781,
+ 0x8fbf0018, 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3c020800,
+ 0x8c430020, 0x27bdffe8, 0xafb00010, 0x27500100, 0x10600024, 0xafbf0014,
+ 0x0e001006, 0x00000000, 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018,
+ 0x8e020004, 0xac820004, 0x8f830018, 0x8e020018, 0xac620008, 0x8f840018,
+ 0x8e03001c, 0xac83000c, 0x9602000c, 0x9203000a, 0x8f840018, 0x00021400,
+ 0x00431025, 0xac820010, 0x8f830018, 0x3c026000, 0xac600014, 0x8f840018,
+ 0x8c434448, 0xac830018, 0x96020008, 0x3c030800, 0x9464466e, 0x8f850018,
+ 0x00021400, 0x00441025, 0x24040001, 0x0e001044, 0xaca2001c, 0x8fbf0014,
+ 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c020800, 0x8c430020, 0x27bdffe8,
+ 0xafb00010, 0x27500100, 0x10600020, 0xafbf0014, 0x0e001006, 0x00000000,
+ 0x8f820018, 0xac400000, 0x8f830018, 0xac600004, 0x8f820018, 0xac400008,
+ 0x8f830018, 0xac60000c, 0x9602000c, 0x9603000e, 0x8f840018, 0x00021400,
+ 0x00431025, 0xac820010, 0x8f830018, 0x3c026000, 0xac600014, 0x8f840018,
+ 0x8c434448, 0xac830018, 0x96020008, 0x3c030800, 0x9464466e, 0x8f850018,
+ 0x00021400, 0x00441025, 0x24040001, 0x0e001044, 0xaca2001c, 0x8fbf0014,
+ 0x8fb00010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0xafb00010, 0x27500100,
+ 0xafbf0014, 0x9602000c, 0x10400024, 0x00802821, 0x3c020800, 0x8c430020,
+ 0x1060003a, 0x8fbf0014, 0x0e001006, 0x00000000, 0x8f840018, 0x8e030000,
+ 0xac830000, 0x9602000c, 0x8f840018, 0x00021400, 0xac820004, 0x8f830018,
+ 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018,
+ 0xac400014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, 0x3c020800,
+ 0xaca30018, 0x9443466e, 0x8f850018, 0x3c02400b, 0x00621825, 0x0e001044,
+ 0xaca3001c, 0x0a000d19, 0x8fbf0014, 0x93620005, 0x30420010, 0x14400015,
+ 0x3c029000, 0x34420001, 0x00a21025, 0xaf420020, 0x3c038000, 0x8f420020,
+ 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, 0x93620005, 0x34630001,
+ 0x00a02021, 0x00a31825, 0x24055852, 0x34420010, 0xa3620005, 0x0e000553,
+ 0xaf430020, 0x0a000d19, 0x8fbf0014, 0x0000000d, 0x8fbf0014, 0x8fb00010,
+ 0x03e00008, 0x27bd0018, 0x3c020800, 0x8c430020, 0x27bdffe8, 0xafb00010,
+ 0x27500100, 0x10600022, 0xafbf0014, 0x0e001006, 0x00000000, 0x8f840018,
+ 0x8e020004, 0xac820000, 0x9603000c, 0x9762002c, 0x8f840018, 0x00031c00,
+ 0x00431025, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c,
+ 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, 0x8f850018, 0x3c026000,
+ 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018,
+ 0x3c02400e, 0x00621825, 0x0e001044, 0xaca3001c, 0x0e000d48, 0x8e040000,
+ 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c038000, 0x8f420278,
+ 0x00431024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf440240, 0xa3420244,
+ 0x03e00008, 0xaf430278, 0x3c020800, 0x8c430020, 0x27bdffe0, 0xafb10014,
+ 0x00808821, 0xafb20018, 0x00c09021, 0xafb00010, 0x30b0ffff, 0x1060001c,
+ 0xafbf001c, 0x0e001006, 0x00000000, 0x8f820018, 0xac510000, 0x8f840018,
+ 0x00101400, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c,
+ 0x8f830018, 0xac600010, 0x8f820018, 0xac520014, 0x8f840018, 0x3c026000,
+ 0x8c434448, 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c024019,
+ 0x00621825, 0xac83001c, 0x0e001044, 0x24040001, 0x8fbf001c, 0x8fb20018,
+ 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x27bdffe8, 0x27450100,
+ 0xafbf0010, 0x94a3000c, 0x240200c1, 0x14620029, 0x00803021, 0x3c029000,
+ 0x34420001, 0x00c21025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024,
+ 0x1440fffd, 0x3c028000, 0x34420001, 0x3c049000, 0x34840001, 0x3c058000,
+ 0x24030012, 0x00c21025, 0x00c42025, 0xa363003f, 0xaf420020, 0xaf440020,
+ 0x8f420020, 0x00451024, 0x1440fffd, 0x3c038000, 0x9362007d, 0x34630001,
+ 0x3c048000, 0x00c31825, 0x34420020, 0xa362007d, 0xaf430020, 0x8f4201f8,
+ 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4601c0, 0xa34201c4,
+ 0xaf4301f8, 0x0a000db3, 0x8fbf0010, 0x00c02021, 0x94a5000c, 0x24060001,
+ 0x0e000f78, 0x240706d8, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x3c020800,
+ 0x8c430020, 0x27bdffe0, 0xafb00010, 0x00808021, 0xafb20018, 0x00a09021,
+ 0xafb10014, 0x30d100ff, 0x1060001c, 0xafbf001c, 0x0e001006, 0x00000000,
+ 0x8f820018, 0xac500000, 0x8f840018, 0x24020001, 0xac820004, 0x8f830018,
+ 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018,
+ 0xac520014, 0x8f840018, 0x3c026000, 0x8c434448, 0x3c020800, 0xac830018,
+ 0x9443466e, 0x8f840018, 0x3c024010, 0x00621825, 0xac83001c, 0x0e001044,
+ 0x02202021, 0x8fbf001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x03e00008,
+ 0x27bd0020, 0x27bdffe8, 0xafbf0014, 0xafb00010, 0x93620005, 0x30420001,
+ 0x10400033, 0x00808021, 0x3c029000, 0x34420001, 0x02021025, 0xaf420020,
+ 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005,
+ 0x3c048000, 0x3c030800, 0x304200fe, 0xa3620005, 0x8c620020, 0x34840001,
+ 0x02042025, 0xaf440020, 0x10400020, 0x8fbf0014, 0x0e001006, 0x00000000,
+ 0x8f820018, 0xac500000, 0x93630082, 0x9362003f, 0x8f840018, 0x00031a00,
+ 0x00431025, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c,
+ 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, 0x8f840018, 0x3c026000,
+ 0x8c434448, 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c02400a,
+ 0x00621825, 0xac83001c, 0x0e001044, 0x24040001, 0x8fbf0014, 0x8fb00010,
+ 0x03e00008, 0x27bd0018, 0x27bdffe8, 0xafbf0010, 0x8f420188, 0x00803021,
+ 0x9364003f, 0x24030012, 0x00021402, 0x1483001c, 0x304500ff, 0x3c029000,
+ 0x34420001, 0x3c038000, 0x00c21025, 0xa3650080, 0xa365007a, 0xaf420020,
+ 0x8f420020, 0x00431024, 0x1440fffd, 0x3c028000, 0x9363007d, 0x34420001,
+ 0x3c048000, 0x00c21025, 0xa363007d, 0xaf420020, 0x8f4201f8, 0x00441024,
+ 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4601c0, 0xa34201c4, 0xaf4301f8,
+ 0x0a000e54, 0x8fbf0010, 0x9362007e, 0x1445000e, 0x00000000, 0x93620080,
+ 0x1045000b, 0x00000000, 0xa3650080, 0x8f820000, 0x93660080, 0x8f440180,
+ 0x8f65004c, 0x8c430000, 0x0060f809, 0x00000000, 0x0a000e54, 0x8fbf0010,
+ 0xa3650080, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x3c020800, 0x8c430020,
+ 0x27bdffe0, 0xafb10014, 0x00808821, 0xafb20018, 0x00a09021, 0xafb00010,
+ 0x30d000ff, 0x1060002f, 0xafbf001c, 0x0e001006, 0x00000000, 0x8f820018,
+ 0xac510000, 0x8f830018, 0xac700004, 0x8f820018, 0xac520008, 0x8f830018,
+ 0xac60000c, 0x8f820018, 0xac400010, 0x9763006a, 0x00032880, 0x50a00001,
+ 0x24050001, 0x97630068, 0x93640081, 0x3c020800, 0x8c46004c, 0x00652821,
+ 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, 0x3c020800, 0x8c440050,
+ 0x00c4182b, 0x54600001, 0x00c02021, 0x8f830018, 0x2402fffe, 0x00822824,
+ 0x3c026000, 0xac650014, 0x8f840018, 0x8c434448, 0x3c020800, 0xac830018,
+ 0x9443466e, 0x8f840018, 0x3c024011, 0x00621825, 0xac83001c, 0x0e001044,
+ 0x24040001, 0x8fbf001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x03e00008,
+ 0x27bd0020, 0x27bdffe8, 0xafbf0014, 0xafb00010, 0x8f440100, 0x27500100,
+ 0x8f650050, 0x0e000c45, 0x9206001b, 0x3c020800, 0x8c430020, 0x1060001d,
+ 0x8e100018, 0x0e001006, 0x00000000, 0x8f840018, 0x8f420100, 0xac820000,
+ 0x8f830018, 0xac700004, 0x8f840018, 0x8f620050, 0xac820008, 0x8f830018,
+ 0xac60000c, 0x8f820018, 0xac400010, 0x8f830018, 0x3c026000, 0xac600014,
+ 0x8f850018, 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e,
+ 0x8f850018, 0x3c02401c, 0x00621825, 0x0e001044, 0xaca3001c, 0x8fbf0014,
+ 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c029000, 0x8f460140, 0x34420001,
+ 0x3c038000, 0x00c21025, 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd,
+ 0x3c048000, 0x34840001, 0x3c059000, 0x34a50001, 0x3c078000, 0x24020012,
+ 0x24030080, 0x00c42025, 0x00c52825, 0xa362003f, 0xa3630082, 0xaf440020,
+ 0xaf450020, 0x8f420020, 0x00471024, 0x1440fffd, 0x3c038000, 0x9362007d,
+ 0x34630001, 0x3c048000, 0x00c31825, 0x34420020, 0xa362007d, 0xaf430020,
+ 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4601c0,
+ 0xa34201c4, 0x03e00008, 0xaf4301f8, 0x8f430238, 0x3c020800, 0x04610013,
+ 0x8c44009c, 0x2406fffe, 0x3c050800, 0x3c038000, 0x2484ffff, 0x14800009,
+ 0x00000000, 0x97420078, 0x8ca3007c, 0x24420001, 0x00461024, 0x24630001,
+ 0xa7620010, 0x03e00008, 0xaca3007c, 0x8f420238, 0x00431024, 0x1440fff3,
+ 0x2484ffff, 0x8f420140, 0x3c031000, 0xaf420200, 0x03e00008, 0xaf430238,
+ 0x3c029000, 0x8f440140, 0x34420001, 0x3c038000, 0x00821025, 0xaf420020,
+ 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, 0x9362007d,
+ 0x34630001, 0x3c058000, 0x00831825, 0x34420001, 0xa362007d, 0xaf430020,
+ 0x8f4201f8, 0x00451024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4401c0,
+ 0xa34201c4, 0x03e00008, 0xaf4301f8, 0x0000000d, 0x03e00008, 0x00000000,
+ 0x0000000d, 0x03e00008, 0x00000000, 0x24020001, 0x03e00008, 0xa7620010,
+ 0x9362003f, 0x304400ff, 0x3883000e, 0x2c630001, 0x38820010, 0x2c420001,
+ 0x00621825, 0x14600003, 0x24020012, 0x14820003, 0x00000000, 0x03e00008,
+ 0x00001021, 0x9363007e, 0x9362007a, 0x14620006, 0x00000000, 0x9363007e,
+ 0x24020001, 0x24630001, 0x03e00008, 0xa363007e, 0x9363007e, 0x93620080,
+ 0x14620004, 0x24020001, 0xa362000b, 0x03e00008, 0x24020001, 0x03e00008,
+ 0x00001021, 0x9362000b, 0x10400021, 0x00001021, 0xa360000b, 0x9362003f,
+ 0x304400ff, 0x3883000e, 0x2c630001, 0x38820010, 0x2c420001, 0x00621825,
+ 0x14600015, 0x00001821, 0x24020012, 0x10820012, 0x00000000, 0x9363007e,
+ 0x9362007a, 0x14620007, 0x00000000, 0x9362007e, 0x24030001, 0x24420001,
+ 0xa362007e, 0x03e00008, 0x00601021, 0x9363007e, 0x93620080, 0x14620004,
+ 0x00001821, 0x24020001, 0xa362000b, 0x24030001, 0x03e00008, 0x00601021,
+ 0x03e00008, 0x00000000, 0x24040001, 0xaf64000c, 0x8f6300dc, 0x8f6200cc,
+ 0x50620001, 0xa7640010, 0xa7640012, 0xa7640014, 0x03e00008, 0xa7640016,
+ 0x27bdffd8, 0xafb00010, 0x00808021, 0xafb3001c, 0x00c09821, 0xafbf0020,
+ 0xafb20018, 0xafb10014, 0x93620023, 0x00e09021, 0x30420040, 0x10400020,
+ 0x30b1ffff, 0x3c020800, 0x8c430020, 0x1060001c, 0x00000000, 0x0e001006,
+ 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x3c02008d, 0xac820004,
+ 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010,
+ 0x8f820018, 0xac520014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001,
+ 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024019, 0x00621825,
+ 0x0e001044, 0xaca3001c, 0x93620023, 0x30420020, 0x14400003, 0x3c020800,
+ 0x52600020, 0x3c029000, 0x8c430020, 0x1060001d, 0x3c029000, 0x0e001006,
+ 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x00111400, 0xac820004,
+ 0x8f830018, 0xac720008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010,
+ 0x8f820018, 0xac400014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001,
+ 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c02401b, 0x00621825,
+ 0x0e001044, 0xaca3001c, 0x3c029000, 0x34420001, 0x02021025, 0xaf420020,
+ 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93630023,
+ 0x3c028000, 0x34420001, 0x02021025, 0x8fbf0020, 0x8fb3001c, 0x8fb20018,
+ 0x8fb10014, 0x8fb00010, 0x3063009f, 0xa3630023, 0xaf420020, 0x03e00008,
+ 0x27bd0028, 0x3c020800, 0x8c430020, 0x27bdffe8, 0xafb00010, 0x27500100,
+ 0x1060001d, 0xafbf0014, 0x0e001006, 0x00000000, 0x8f830018, 0x8e020004,
+ 0xac620000, 0x8f840018, 0x8e020018, 0xac820004, 0x8f850018, 0x8e020000,
+ 0xaca20008, 0x8f830018, 0xac60000c, 0x8f820018, 0xac400010, 0x8f830018,
+ 0xac600014, 0x8f820018, 0xac400018, 0x96030008, 0x3c020800, 0x9444466e,
+ 0x8f850018, 0x00031c00, 0x00641825, 0x24040001, 0x0e001044, 0xaca3001c,
+ 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c060800, 0x24c54660,
+ 0x3c02000a, 0x03421821, 0x94640006, 0x94a2000a, 0x00441023, 0x00021400,
+ 0x00021c03, 0x04610006, 0xa4a40006, 0x0000000d, 0x00000000, 0x2400005a,
+ 0x0a00101b, 0x24020001, 0x8f820014, 0x0062102b, 0x14400002, 0x00001021,
+ 0x24020001, 0x304200ff, 0x1040001c, 0x274a0400, 0x3c07000a, 0x3c020800,
+ 0x24454660, 0x94a9000a, 0x8f880014, 0x03471021, 0x94430006, 0x00402021,
+ 0xa4a30006, 0x94820006, 0xa4a20006, 0x01221023, 0x00021400, 0x00021403,
+ 0x04410006, 0x0048102b, 0x0000000d, 0x00000000, 0x2400005a, 0x0a001036,
+ 0x24020001, 0x14400002, 0x00001021, 0x24020001, 0x304200ff, 0x1440ffec,
+ 0x03471021, 0x24c44660, 0x8c820010, 0xaf420038, 0x8c830014, 0x3c020005,
+ 0xaf43003c, 0xaf420030, 0xaf800010, 0xaf8a0018, 0x03e00008, 0x00000000,
+ 0x27bdffe0, 0x8f820010, 0x8f850018, 0x3c070800, 0x24e84660, 0xafbf001c,
+ 0xafb20018, 0xafb10014, 0xafb00010, 0x9503000a, 0x8d060014, 0x00009021,
+ 0x309000ff, 0x00e08821, 0x24420001, 0x24a50020, 0x24630001, 0xaf820010,
+ 0xaf850018, 0xa503000a, 0x24c30020, 0x3c028000, 0x04c10007, 0xad030014,
+ 0x00621024, 0x14400005, 0x26224660, 0x8d020010, 0x24420001, 0xad020010,
+ 0x26224660, 0x9444000a, 0x94450018, 0x0010102b, 0x00a41826, 0x2c630001,
+ 0x00621825, 0x1060001c, 0x3c030006, 0x8f820010, 0x24120001, 0x00021140,
+ 0x00431025, 0xaf420030, 0x00000000, 0x00000000, 0x00000000, 0x27450400,
+ 0x8f420000, 0x30420010, 0x1040fffd, 0x26224660, 0x9444000a, 0x94430018,
+ 0xaf800010, 0xaf850018, 0x14830012, 0x26274660, 0x0e0010d2, 0x00000000,
+ 0x1600000e, 0x26274660, 0x0e001006, 0x00000000, 0x0a00108f, 0x26274660,
+ 0x00041c00, 0x00031c03, 0x00051400, 0x00021403, 0x00621823, 0x18600002,
+ 0x3c026000, 0xac400808, 0x26274660, 0x94e2000e, 0x94e3000c, 0x24420001,
+ 0xa4e2000e, 0x3042ffff, 0x50430001, 0xa4e0000e, 0x12000005, 0x3c02000a,
+ 0x94e2000a, 0xa74200a2, 0x0a0010cc, 0x02401021, 0x03421821, 0x94640006,
+ 0x94e2000a, 0x00441023, 0x00021400, 0x00021c03, 0x04610006, 0xa4e40006,
+ 0x0000000d, 0x00000000, 0x2400005a, 0x0a0010ae, 0x24020001, 0x8f820014,
+ 0x0062102b, 0x14400002, 0x00001021, 0x24020001, 0x304200ff, 0x1040001b,
+ 0x3c020800, 0x3c06000a, 0x24454660, 0x94a8000a, 0x8f870014, 0x03461021,
+ 0x94430006, 0x00402021, 0xa4a30006, 0x94820006, 0xa4a20006, 0x01021023,
+ 0x00021400, 0x00021403, 0x04410006, 0x0047102b, 0x0000000d, 0x00000000,
+ 0x2400005a, 0x0a0010c8, 0x24020001, 0x14400002, 0x00001021, 0x24020001,
+ 0x304200ff, 0x1440ffec, 0x03461021, 0x02401021, 0x8fbf001c, 0x8fb20018,
+ 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3c020800, 0x24454660,
+ 0x94a3001a, 0x8ca40024, 0x00403021, 0x000318c0, 0x00832021, 0xaf44003c,
+ 0x8ca20020, 0xaf420038, 0x3c020050, 0x34420008, 0xaf420030, 0x00000000,
+ 0x00000000, 0x00000000, 0x8f420000, 0x30420020, 0x1040fffd, 0x00000000,
+ 0x8f430400, 0x24c64660, 0xacc30010, 0x8f420404, 0x3c030020, 0xacc20014,
+ 0xaf430030, 0x94c40018, 0x94c3001c, 0x94c2001a, 0x94c5001e, 0x00832021,
+ 0x24420001, 0xa4c2001a, 0x3042ffff, 0x14450002, 0xa4c40018, 0xa4c0001a,
+ 0x03e00008, 0x00000000, 0x8f820010, 0x3c030006, 0x00021140, 0x00431025,
+ 0xaf420030, 0x00000000, 0x00000000, 0x00000000, 0x27430400, 0x8f420000,
+ 0x30420010, 0x1040fffd, 0x00000000, 0xaf800010, 0xaf830018, 0x03e00008,
+ 0x00000000, 0x27bdffe8, 0xafb00010, 0x3c100800, 0x26104660, 0x3c05000a,
+ 0x02002021, 0x03452821, 0xafbf0014, 0x0e001128, 0x2406000a, 0x96020002,
+ 0x9603001e, 0x3042000f, 0x24420003, 0x00431804, 0x24027fff, 0x0043102b,
+ 0xaf830014, 0x10400004, 0x00000000, 0x0000000d, 0x00000000, 0x24000043,
+ 0x0e0010d2, 0x00000000, 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018,
+ 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000,
+ 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a001137, 0x00a01021,
+ 0xac860000, 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, 0x03e00008,
+ 0x00000000, 0x3c036000, 0x8c642b7c, 0x3c036010, 0x8c6553fc, 0x00041582,
+ 0x00042302, 0x308403ff, 0x00052d82, 0x00441026, 0x0002102b, 0x0005282b,
+ 0x00451025, 0x1440000d, 0x3c020050, 0x34420004, 0xaf400038, 0xaf40003c,
+ 0xaf420030, 0x00000000, 0x00000000, 0x8f420000, 0x30420020, 0x1040fffd,
+ 0x3c020020, 0xaf420030, 0x0000000d, 0x03e00008, 0x00000000, 0x3c020050,
+ 0x34420004, 0xaf440038, 0xaf45003c, 0xaf420030, 0x00000000, 0x00000000,
+ 0x8f420000, 0x30420020, 0x1040fffd, 0x3c020020, 0xaf420030, 0x03e00008,
+ 0x00000000, 0x00000000 };
+
+static u32 bnx2_COM_b06FwData[(0x0/4) + 1] = { 0x00000000 };
+static u32 bnx2_COM_b06FwRodata[(0x18/4) + 1] = {
+ 0x08002318, 0x08002348, 0x08002378, 0x080023a8, 0x080023d8, 0x00000000,
+ 0x00000000 };
+
+static u32 bnx2_COM_b06FwBss[(0x88/4) + 1] = { 0x00000000 };
+static u32 bnx2_COM_b06FwSbss[(0x1c/4) + 1] = { 0x00000000 };
+
+static int bnx2_RXP_b06FwReleaseMajor = 0x0;
+static int bnx2_RXP_b06FwReleaseMinor = 0x0;
+static int bnx2_RXP_b06FwReleaseFix = 0x0;
+static u32 bnx2_RXP_b06FwStartAddr = 0x08000060;
+static u32 bnx2_RXP_b06FwTextAddr = 0x08000000;
+static int bnx2_RXP_b06FwTextLen = 0x20b8;
+static u32 bnx2_RXP_b06FwDataAddr = 0x080020e0;
+static int bnx2_RXP_b06FwDataLen = 0x0;
+static u32 bnx2_RXP_b06FwRodataAddr = 0x00000000;
+static int bnx2_RXP_b06FwRodataLen = 0x0;
+static u32 bnx2_RXP_b06FwBssAddr = 0x08002100;
+static int bnx2_RXP_b06FwBssLen = 0x239c;
+static u32 bnx2_RXP_b06FwSbssAddr = 0x080020e0;
+static int bnx2_RXP_b06FwSbssLen = 0x14;
+
+static u32 bnx2_RXP_b06FwText[(0x20b8/4) + 1] = {
+ 0x0a000018, 0x00000000, 0x00000000, 0x0000000d, 0x72787020, 0x302e362e,
+ 0x39000000, 0x00060903, 0x00000000, 0x0000000d, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x10000003, 0x00000000, 0x0000000d, 0x0000000d, 0x3c020800,
+ 0x244220e0, 0x3c030800, 0x2463449c, 0xac400000, 0x0043202b, 0x1480fffd,
+ 0x24420004, 0x3c1d0800, 0x37bd3ffc, 0x03a0f021, 0x3c100800, 0x26100060,
+ 0x3c1c0800, 0x279c20e0, 0x0e000329, 0x00000000, 0x0000000d, 0x8f870008,
+ 0x2ce20080, 0x10400018, 0x3c030800, 0x24633490, 0x8f460100, 0x00072140,
+ 0x00831021, 0xac460000, 0x8f450104, 0x00641021, 0xac450004, 0x8f460108,
+ 0xac460008, 0x8f45010c, 0xac45000c, 0x8f460114, 0xac460010, 0x8f450118,
+ 0xac450014, 0x8f460124, 0xac460018, 0x8f450128, 0x00641821, 0x24e20001,
+ 0xaf820008, 0xac65001c, 0x03e00008, 0x00000000, 0x00804021, 0x8f830000,
+ 0x24070001, 0x3c020001, 0x00621024, 0x10400037, 0x00603021, 0x9742010e,
+ 0x3c038000, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003,
+ 0xa342018b, 0x8f840004, 0x24020080, 0x24030002, 0xaf420180, 0xa743018c,
+ 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000069, 0x00021400,
+ 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c,
+ 0x24020003, 0x30838000, 0x1060000d, 0xa7420188, 0x93420116, 0x304200fc,
+ 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600005, 0x00000000,
+ 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c,
+ 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6,
+ 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x30c21000,
+ 0x1040000f, 0x00000000, 0x9742010c, 0x3042fc00, 0x5440000b, 0x24070005,
+ 0x3c021000, 0x00c21024, 0x10400007, 0x3c030dff, 0x3463ffff, 0x3c020e00,
+ 0x00c21024, 0x0062182b, 0x54600001, 0x24070005, 0x8f82000c, 0x30434000,
+ 0x10600016, 0x00404821, 0x3c020f00, 0x00c21024, 0x14400012, 0x00000000,
+ 0x93420116, 0x34424000, 0x03421821, 0x94650002, 0x2ca21389, 0x1040000b,
+ 0x3c020800, 0x24422100, 0x00051942, 0x00031880, 0x00621821, 0x30a5001f,
+ 0x8c640000, 0x24020001, 0x00a21004, 0x00822024, 0x01044025, 0x11000037,
+ 0x3c021000, 0x9742010e, 0x34e60002, 0x3c038000, 0x24420004, 0x3045ffff,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x8f840004,
+ 0x24020180, 0x24030002, 0xaf420180, 0xa743018c, 0x10800005, 0xa745018e,
+ 0x9743011c, 0x9742011e, 0x0a0000cd, 0x00021400, 0x9743011e, 0x9742011c,
+ 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, 0x30828000, 0x1040000c,
+ 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000,
+ 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c,
+ 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff,
+ 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x03e00008,
+ 0x00001021, 0x00c21024, 0x104000ba, 0x3c020800, 0x8c430030, 0x1060003e,
+ 0x31224000, 0x1040003c, 0x3c030f00, 0x00c31824, 0x3c020100, 0x0043102b,
+ 0x14400038, 0x3c030800, 0x9742010e, 0x34e60002, 0x3c038000, 0x24420004,
+ 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b,
+ 0x8f840004, 0x24020080, 0x24030002, 0xaf420180, 0xa743018c, 0x10800005,
+ 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000110, 0x00021400, 0x9743011e,
+ 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, 0x30828000,
+ 0x1040000c, 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004,
+ 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024,
+ 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00,
+ 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8,
+ 0x03e00008, 0x00001021, 0x3c030800, 0x8c620024, 0x30420008, 0x1040003d,
+ 0x34e80002, 0x3c020f00, 0x00c21024, 0x5440003a, 0x3107ffff, 0x9742010c,
+ 0x30420200, 0x50400036, 0x3107ffff, 0x9742010e, 0x30e6fffb, 0x3c038000,
+ 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003,
+ 0xa342018b, 0x8f840004, 0x24020180, 0x24030002, 0xaf420180, 0xa743018c,
+ 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000153, 0x00021400,
+ 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c,
+ 0x30828000, 0x1040000c, 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021,
+ 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
+ 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff,
+ 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
+ 0xaf4201b8, 0x3107ffff, 0x8f820000, 0x3c068000, 0x9743010e, 0x00021442,
+ 0x30440780, 0x24630004, 0x3065ffff, 0x8f4201b8, 0x00461024, 0x1440fffd,
+ 0x24020003, 0xa342018b, 0x8f830004, 0x24020002, 0xaf440180, 0xa742018c,
+ 0x10600005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000189, 0x00021400,
+ 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c,
+ 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021,
+ 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
+ 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff,
+ 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
+ 0xaf4201b8, 0x03e00008, 0x00001021, 0x8f424000, 0x30420100, 0x104000ef,
+ 0x3c020800, 0x8c440024, 0x24030001, 0x14830036, 0x00404021, 0x9742010e,
+ 0x34e50002, 0x3c038000, 0x24420004, 0x3044ffff, 0x8f4201b8, 0x00431024,
+ 0x1440fffd, 0x24020003, 0xa342018b, 0x8f830004, 0x24020002, 0xaf400180,
+ 0xa742018c, 0x10600005, 0xa744018e, 0x9743011c, 0x9742011e, 0x0a0001c6,
+ 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8,
+ 0x8f84000c, 0x30828000, 0x1040000c, 0xa7450188, 0x93420116, 0x304200fc,
+ 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff,
+ 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104,
+ 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac,
+ 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x30820001, 0x10400035,
+ 0x30e90004, 0x9742010e, 0x30e6fffb, 0x3c038000, 0x24420004, 0x3044ffff,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x8f830004,
+ 0x24020002, 0xaf400180, 0xa742018c, 0x10600005, 0xa744018e, 0x9743011c,
+ 0x9742011e, 0x0a0001fe, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400,
+ 0x00621825, 0xaf4301a8, 0x8f84000c, 0x30828000, 0x1040000c, 0xa7470188,
+ 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff,
+ 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e,
+ 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825,
+ 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x30c7ffff, 0x8d020024,
+ 0x30420004, 0x10400037, 0x8d020024, 0x9742010e, 0x30e6fffb, 0x3c038000,
+ 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003,
+ 0xa342018b, 0x8f840004, 0x24020100, 0x24030002, 0xaf420180, 0xa743018c,
+ 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000237, 0x00021400,
+ 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c,
+ 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021,
+ 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
+ 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff,
+ 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
+ 0xaf4201b8, 0x30c7ffff, 0x8d020024, 0x30420008, 0x10400034, 0x00000000,
+ 0x9742010e, 0x3c038000, 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024,
+ 0x1440fffd, 0x24020003, 0xa342018b, 0x8f840004, 0x24020180, 0x24030002,
+ 0xaf420180, 0xa743018c, 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e,
+ 0x0a00026f, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825,
+ 0xaf4301a8, 0x8f84000c, 0x30828000, 0x1040000c, 0xa7470188, 0x93420116,
+ 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004,
+ 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c,
+ 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6,
+ 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x15200046, 0x00001021, 0x3c038000,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0x24032000, 0xa342018b,
+ 0xa7430188, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x3c030800,
+ 0x8c620024, 0x30420001, 0x10400035, 0x00001021, 0x9742010e, 0x34e50002,
+ 0x3c038000, 0x24420004, 0x3044ffff, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x24020003, 0xa342018b, 0x8f830004, 0x24020002, 0xaf400180, 0xa742018c,
+ 0x10600005, 0xa744018e, 0x9743011c, 0x9742011e, 0x0a0002b5, 0x00021400,
+ 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c,
+ 0x30828000, 0x1040000c, 0xa7450188, 0x93420116, 0x304200fc, 0x005a1021,
+ 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
+ 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff,
+ 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
+ 0xaf4201b8, 0x00001021, 0x03e00008, 0x00000000, 0x27bdffe0, 0xafbf0018,
+ 0xafb10014, 0xafb00010, 0x8f420140, 0xaf420020, 0x8f430148, 0x3c027000,
+ 0x00621824, 0x3c024000, 0x1062000c, 0x0043102b, 0x14400006, 0x3c025000,
+ 0x3c023000, 0x1062000b, 0x3c024000, 0x0a00031f, 0x00000000, 0x10620034,
+ 0x3c024000, 0x0a00031f, 0x00000000, 0x0e00067c, 0x00000000, 0x0a00031f,
+ 0x3c024000, 0x8f420148, 0x24030002, 0x3044ffff, 0x00021402, 0x305000ff,
+ 0x1203000c, 0x27510180, 0x2a020003, 0x10400005, 0x24020003, 0x0600001d,
+ 0x36053000, 0x0a00030a, 0x3c038000, 0x12020007, 0x00000000, 0x0a000317,
+ 0x00000000, 0x0e000423, 0x00000000, 0x0a000308, 0x00402021, 0x0e000435,
+ 0x00000000, 0x00402021, 0x36053000, 0x3c038000, 0x8f4201b8, 0x00431024,
+ 0x1440fffd, 0x24020002, 0xa6250008, 0xa222000b, 0xa6240010, 0x8f420144,
+ 0x3c031000, 0xae220024, 0xaf4301b8, 0x0a00031f, 0x3c024000, 0x0000000d,
+ 0x00000000, 0x240001c3, 0x0a00031f, 0x3c024000, 0x0e0007f7, 0x00000000,
+ 0x3c024000, 0xaf420178, 0x00000000, 0x8fbf0018, 0x8fb10014, 0x8fb00010,
+ 0x03e00008, 0x27bd0020, 0x24020800, 0x03e00008, 0xaf4201b8, 0x27bdffe8,
+ 0x3c04600c, 0xafbf0014, 0xafb00010, 0x8c825000, 0x3c1a8000, 0x2403ff7f,
+ 0x3c106000, 0x00431024, 0x3442380c, 0x24030003, 0xac825000, 0x3c040008,
+ 0xaf430008, 0x8e020808, 0x3c030800, 0xac600020, 0x3042fff0, 0x2c420001,
+ 0xaf820004, 0x0e000819, 0x0344d825, 0x0e000781, 0x00000000, 0x3c020400,
+ 0x3442000c, 0x3c03ffff, 0x34630806, 0xae021948, 0xae03194c, 0x8e021980,
+ 0x34420200, 0xae021980, 0x8f500000, 0x32020003, 0x1040fffd, 0x32020001,
+ 0x10400004, 0x32020002, 0x0e0003bd, 0x00000000, 0x32020002, 0x1040fff6,
+ 0x00000000, 0x0e0002d4, 0x00000000, 0x0a00034a, 0x00000000, 0x27bdffe8,
+ 0x3c04600c, 0xafbf0014, 0xafb00010, 0x8c825000, 0x3c1a8000, 0x2403ff7f,
+ 0x3c106000, 0x00431024, 0x3442380c, 0x24030003, 0xac825000, 0x3c040008,
+ 0xaf430008, 0x8e020808, 0x3c030800, 0xac600020, 0x3042fff0, 0x2c420001,
+ 0xaf820004, 0x0e000819, 0x0344d825, 0x0e000781, 0x00000000, 0x3c020400,
+ 0x3442000c, 0x3c03ffff, 0x34630806, 0xae021948, 0xae03194c, 0x8e021980,
+ 0x8fbf0014, 0x34420200, 0xae021980, 0x8fb00010, 0x03e00008, 0x27bd0018,
+ 0x30a5ffff, 0x30c6ffff, 0x30e7ffff, 0x3c038000, 0x8f4201b8, 0x00431024,
+ 0x1440fffd, 0x24020003, 0xa342018b, 0x8f830004, 0xaf440180, 0xa745018c,
+ 0x10600005, 0xa746018e, 0x9743011c, 0x9742011e, 0x0a000393, 0x00021400,
+ 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c,
+ 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021,
+ 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
+ 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff,
+ 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
+ 0xaf4201b8, 0x03e00008, 0x00000000, 0x3c038000, 0x8f4201b8, 0x00431024,
+ 0x1440fffd, 0x24020002, 0x24032000, 0xa342018b, 0xa7430188, 0x3c021000,
+ 0xaf4201b8, 0x03e00008, 0x00000000, 0x27bdffe8, 0xafbf0010, 0x8f460128,
+ 0xaf460020, 0x8f420104, 0x8f450100, 0x24030800, 0x3c040010, 0xaf820000,
+ 0x00441024, 0xaf85000c, 0xaf4301b8, 0x14400005, 0x3c02001f, 0x3c030800,
+ 0x8c620020, 0x0a0003d5, 0x00002021, 0x3442ff00, 0x14c20009, 0x2402bfff,
+ 0x3c030800, 0x8c620020, 0x24040001, 0x24420001, 0x0e00004c, 0xac620020,
+ 0x0a0003e4, 0x00000000, 0x00a21024, 0x14400006, 0x00000000, 0xaf400048,
+ 0x0e000448, 0xaf400040, 0x0a0003e4, 0x00000000, 0x0e000783, 0x00000000,
+ 0x10400005, 0x3c024000, 0x8f430124, 0x3c026020, 0xac430014, 0x3c024000,
+ 0xaf420138, 0x00000000, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe0,
+ 0xafbf0018, 0xafb10014, 0xafb00010, 0x8f420148, 0x24030002, 0x3044ffff,
+ 0x00021402, 0x305000ff, 0x1203000c, 0x27510180, 0x2a020003, 0x10400005,
+ 0x24020003, 0x0600001d, 0x36053000, 0x0a00040e, 0x3c038000, 0x12020007,
+ 0x00000000, 0x0a00041b, 0x00000000, 0x0e000423, 0x00000000, 0x0a00040c,
+ 0x00402021, 0x0e000435, 0x00000000, 0x00402021, 0x36053000, 0x3c038000,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0xa6250008, 0xa222000b,
+ 0xa6240010, 0x8f420144, 0x3c031000, 0xae220024, 0xaf4301b8, 0x0a00041f,
+ 0x8fbf0018, 0x0000000d, 0x00000000, 0x240001c3, 0x8fbf0018, 0x8fb10014,
+ 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3084ffff, 0x2c821389, 0x1040000d,
+ 0x00001021, 0x3c030800, 0x24632100, 0x00042942, 0x00052880, 0x00a32821,
+ 0x3086001f, 0x8ca40000, 0x24030001, 0x00c31804, 0x00832025, 0x03e00008,
+ 0xaca40000, 0x03e00008, 0x24020091, 0x3084ffff, 0x2c821389, 0x1040000e,
+ 0x00001021, 0x3c030800, 0x24632100, 0x00042942, 0x00052880, 0x00a32821,
+ 0x3086001f, 0x24030001, 0x8ca40000, 0x00c31804, 0x00031827, 0x00832024,
+ 0x03e00008, 0xaca40000, 0x03e00008, 0x24020091, 0x27bdffb0, 0x3c026000,
+ 0xafbf0048, 0x8c434448, 0xaf630140, 0x93620005, 0x30420001, 0x14400005,
+ 0x00000000, 0x0e0007ed, 0x00000000, 0x0a00067a, 0x8fbf0048, 0x93420116,
+ 0x93430112, 0x8f430104, 0x3c040020, 0x34424000, 0x00641824, 0x1060000d,
+ 0x03426021, 0x8f430128, 0x27420180, 0xac430000, 0x8f650040, 0x24040008,
+ 0x240340c1, 0xa4430008, 0x24030002, 0xa043000b, 0x3c031000, 0x0a000563,
+ 0xa044000a, 0x8f420104, 0x3c030040, 0x00431024, 0x10400007, 0x00000000,
+ 0x8f430128, 0x27420180, 0xac430000, 0x8f650040, 0x0a00055c, 0x24040010,
+ 0xaf400048, 0xaf400054, 0xaf400040, 0x8f630048, 0x8f620040, 0x00624823,
+ 0x05210004, 0x00000000, 0x0000000d, 0x00000000, 0x24000132, 0x9742011a,
+ 0x3046ffff, 0x10c00004, 0x8d880004, 0x01061021, 0x0a000487, 0x2445ffff,
+ 0x01002821, 0x918a000d, 0xa7a00020, 0xafa00028, 0x9364003f, 0x3c026000,
+ 0x8c434448, 0x308700ff, 0x31420004, 0x10400033, 0xaf630144, 0x24090012,
+ 0x14e90006, 0x3c040800, 0x8c830028, 0x24020001, 0x24630001, 0x0a00054e,
+ 0xac830028, 0x8f620044, 0x15020012, 0x97a20020, 0x27a60010, 0x27450180,
+ 0x3442001a, 0xa7a20020, 0x8f630040, 0x3c048000, 0x24020020, 0xa3a70022,
+ 0xa3a90023, 0xa3a2001a, 0xafa30028, 0x8f4201b8, 0x00441024, 0x1440fffd,
+ 0x00000000, 0x0a000533, 0x00000000, 0x8f620044, 0x01021023, 0x0440009e,
+ 0x24020001, 0x8f620048, 0x01021023, 0x0441009a, 0x24020001, 0x97a20020,
+ 0x27a60010, 0x34420001, 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000,
+ 0xafa30028, 0x8f4201b8, 0x00441024, 0x1440fffd, 0x00000000, 0x0a000533,
+ 0x00000000, 0x3c026000, 0x8c424448, 0xaf620148, 0x8f630040, 0x00685823,
+ 0x19600013, 0x00cb102a, 0x54400007, 0x314a00fe, 0x5566000c, 0x010b4021,
+ 0x31420001, 0x54400009, 0x010b4021, 0x314a00fe, 0x24020001, 0xa7a20020,
+ 0x8f630040, 0x00c05821, 0x00003021, 0x0a0004dd, 0xafa30028, 0x00cb1023,
+ 0x0a0004dd, 0x3046ffff, 0x00005821, 0x8f620048, 0x2442ffff, 0x00a21823,
+ 0x18600019, 0x0066102a, 0x14400013, 0x24020001, 0xa7a20020, 0x8f630040,
+ 0xafa30028, 0x8f620040, 0x55020005, 0x27a60010, 0x55200003, 0x27a60010,
+ 0x0a0004f6, 0x00c01821, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024,
+ 0x1440fffd, 0x00000000, 0x0a000533, 0x00000000, 0x8f650048, 0x00c31023,
+ 0x3046ffff, 0x314a00f6, 0x3c046000, 0x8c824448, 0x31430002, 0x1060001e,
+ 0xaf62014c, 0x8f620044, 0x1502000e, 0x97a20020, 0x27a60010, 0x34420200,
+ 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, 0xafa30028, 0x8f4201b8,
+ 0x00441024, 0x1440fffd, 0x00000000, 0x0a000533, 0x00000000, 0x27a60010,
+ 0x34420001, 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, 0xafa30028,
+ 0x8f4201b8, 0x00441024, 0x1440fffd, 0x00000000, 0x0a000533, 0x00000000,
+ 0x3c026000, 0x8c424448, 0x31430010, 0xaf620150, 0x54600003, 0x8d890008,
+ 0x0a00054e, 0x24020001, 0x8f630054, 0x2522ffff, 0x00431023, 0x1840002a,
+ 0x24020001, 0x27a60010, 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000,
+ 0xafa30028, 0x8f4201b8, 0x00441024, 0x1440fffd, 0x00000000, 0x8f420128,
+ 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008, 0xaca30018, 0x90c4000a,
+ 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010, 0xa4a20010, 0x90c30012,
+ 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014, 0xaca30014, 0x8cc20024,
+ 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc4002c, 0x24020001, 0x3c031000,
+ 0xaca4002c, 0xaf4301b8, 0xaf400044, 0xaf400050, 0x0a00067a, 0x8fbf0048,
+ 0x3c026000, 0x8c424448, 0x31430020, 0x10600019, 0xaf620154, 0x8f430128,
+ 0x27420180, 0xac430000, 0x8f650040, 0x24040004, 0x240340c1, 0xa4430008,
+ 0x24030002, 0xa044000a, 0x24040008, 0xa043000b, 0x3c031000, 0xa4440010,
+ 0xa0400012, 0xa0400013, 0xac400014, 0xac400024, 0xac400028, 0xac40002c,
+ 0xac450018, 0x0e0007ed, 0xaf4301b8, 0x0a00067a, 0x8fbf0048, 0x8f430104,
+ 0x8c824448, 0x38e3000a, 0x2c630001, 0xaf620158, 0x38e2000c, 0x2c420001,
+ 0x00621825, 0x14600003, 0x2402000e, 0x14e2002a, 0x00000000, 0x50c00008,
+ 0x9584000e, 0x10c00004, 0xa7a60040, 0x01061021, 0x0a000583, 0x2445ffff,
+ 0x01002821, 0x9584000e, 0x93630035, 0x8f62004c, 0x00642004, 0x00892021,
+ 0x00821023, 0x1840001f, 0x3c026000, 0x8f620018, 0x01021023, 0x1c40000f,
+ 0x97a20020, 0x8f620018, 0x15020018, 0x3c026000, 0x8f62001c, 0x01221023,
+ 0x1c400008, 0x97a20020, 0x8f62001c, 0x15220011, 0x3c026000, 0x8f620058,
+ 0x00821023, 0x1840000c, 0x97a20020, 0xafa50028, 0xafa80034, 0xafa90038,
+ 0xafa4003c, 0x34420020, 0x0a0005a8, 0xa7a20020, 0x8f680040, 0x00003021,
+ 0x8f640058, 0x01002821, 0x3c026000, 0x8c434448, 0xaf63015c, 0x8f62004c,
+ 0x01221023, 0x18400009, 0x00000000, 0x8f620054, 0x01221023, 0x1c400005,
+ 0x97a20020, 0xafa50028, 0xafa90024, 0x0a0005c3, 0x34420040, 0x9742011a,
+ 0x1440000c, 0x24020014, 0x8f620058, 0x14820009, 0x24020014, 0x8f63004c,
+ 0x8f620054, 0x10620004, 0x97a20020, 0xafa50028, 0x34420080, 0xa7a20020,
+ 0x24020014, 0x10e2000a, 0x28e20015, 0x10400005, 0x2402000c, 0x10e20006,
+ 0x3c026000, 0x0a000600, 0x00000000, 0x24020016, 0x14e20031, 0x3c026000,
+ 0x8f620054, 0x24420001, 0x1522002d, 0x3c026000, 0x24020014, 0x10e2001e,
+ 0x28e20015, 0x10400005, 0x2402000c, 0x10e20008, 0x3c026000, 0x0a000600,
+ 0x00000000, 0x24020016, 0x10e2000c, 0x97a20020, 0x0a000600, 0x3c026000,
+ 0x97a30020, 0x2402000e, 0xafa50028, 0xa3a70022, 0xa3a20023, 0xafa90024,
+ 0x34630054, 0x0a0005ff, 0xa7a30020, 0x24030010, 0x24040002, 0xafa50028,
+ 0xa3a70022, 0xa3a30023, 0xa3a4001a, 0xafa90024, 0x0a0005fe, 0x3442005d,
+ 0x97a20020, 0x24030012, 0x24040002, 0xafa50028, 0xa3a70022, 0xa3a30023,
+ 0xa3a4001a, 0xafa90024, 0x3042fffe, 0x3442005c, 0xa7a20020, 0x3c026000,
+ 0x8c434448, 0x31420001, 0xaf630160, 0x1040002c, 0x2402000c, 0x10e20014,
+ 0x28e2000d, 0x10400005, 0x2402000a, 0x10e20008, 0x97a20020, 0x0a000631,
+ 0x3c026000, 0x2402000e, 0x10e20018, 0x3c026000, 0x0a000631, 0x00000000,
+ 0x24030008, 0x24040002, 0xafa50028, 0xa3a70022, 0xa3a30023, 0xa3a4001a,
+ 0x0a00062f, 0x34420013, 0x97a30020, 0x30620004, 0x1440000b, 0x97a20020,
+ 0x3462001b, 0xa7a20020, 0x24020016, 0x24030002, 0xafa50028, 0xa3a70022,
+ 0xa3a20023, 0x0a000630, 0xa3a3001a, 0x97a20020, 0x24030010, 0x24040002,
+ 0xafa50028, 0xa3a70022, 0xa3a30023, 0xa3a4001a, 0x3442001b, 0xa7a20020,
+ 0x3c026000, 0x8c434448, 0x31420009, 0x0002102b, 0x00021023, 0x30420007,
+ 0x34440003, 0xaf630164, 0x10c00016, 0x24030800, 0x8f820010, 0x27450180,
+ 0x24420001, 0xaf820010, 0x24020004, 0xaf4301b8, 0xa4a40008, 0xa0a2000b,
+ 0x93440120, 0x3c031000, 0xa4a6000e, 0xaca90024, 0xaca80028, 0x008b2021,
+ 0xa4a4000c, 0xaf4301b8, 0x97a20020, 0x00003021, 0x3042ffbf, 0x0a000650,
+ 0xa7a20020, 0x24060001, 0x3c026000, 0x8c434448, 0xaf630168, 0x97a20020,
+ 0x10400020, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x00000000, 0x8f420128, 0xaca20000, 0x8fa30028, 0x240240c1, 0xa4a20008,
+ 0xaca30018, 0x93a4001a, 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x97a20020,
+ 0xa4a20010, 0x93a30022, 0xa0a30012, 0x93a20023, 0xa0a20013, 0x8fa30024,
+ 0xaca30014, 0x8fa20034, 0xaca20024, 0x8fa30038, 0xaca30028, 0x8fa2003c,
+ 0x3c031000, 0xaca2002c, 0xaf4301b8, 0x3c026000, 0x8c434448, 0x00c01021,
+ 0xaf63016c, 0x8fbf0048, 0x03e00008, 0x27bd0050, 0x8f460140, 0x8f470148,
+ 0x3c028000, 0x00e24024, 0x00072c02, 0x30a300ff, 0x2402000b, 0x1062008f,
+ 0x27440180, 0x2862000c, 0x10400011, 0x24020006, 0x1062005a, 0x28620007,
+ 0x10400007, 0x24020008, 0x10600024, 0x24020001, 0x10620037, 0x00000000,
+ 0x0a00077e, 0x00000000, 0x106200a9, 0x24020009, 0x106200bb, 0x00071c02,
+ 0x0a00077e, 0x00000000, 0x2402001b, 0x106200c7, 0x2862001c, 0x10400007,
+ 0x2402000e, 0x106200b1, 0x24020019, 0x106200c2, 0x00071c02, 0x0a00077e,
+ 0x00000000, 0x24020080, 0x10620060, 0x28620081, 0x10400005, 0x2402001c,
+ 0x10620094, 0x00071c02, 0x0a00077e, 0x00000000, 0x240200c2, 0x106200c5,
+ 0x00a01821, 0x0a00077e, 0x00000000, 0x00a01821, 0x3c058000, 0x8f4201b8,
+ 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002, 0xac860000,
+ 0xac800004, 0xa082000a, 0xa083000b, 0xa4870010, 0x8f430144, 0x3c021000,
+ 0xac800028, 0xac830024, 0x3c036000, 0xaf4201b8, 0x03e00008, 0xac600808,
+ 0x11000009, 0x00a01821, 0x3c020800, 0x24030002, 0xa0434490, 0x24424490,
+ 0xac460008, 0x8f430144, 0x03e00008, 0xac430004, 0x3c058000, 0x8f4201b8,
+ 0x00451024, 0x1440fffd, 0x24020002, 0xac800000, 0xac860004, 0xa4830008,
+ 0xa082000a, 0xa082000b, 0xa4870010, 0xac800024, 0x8f420144, 0x3c031000,
+ 0xac820028, 0x3c026000, 0xaf4301b8, 0x03e00008, 0xac400808, 0x00a01821,
+ 0x3c080800, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x00000000,
+ 0xac860000, 0x91024490, 0x00002821, 0x10400002, 0x25064490, 0x8cc50008,
+ 0xac850004, 0xa4830008, 0x91034490, 0x24020002, 0xa082000b, 0xa4870010,
+ 0x34630001, 0xa083000a, 0x8f420144, 0xac820024, 0x91034490, 0x10600002,
+ 0x00001021, 0x8cc20004, 0xac820028, 0x3c021000, 0xaf4201b8, 0x3c026000,
+ 0xa1004490, 0x03e00008, 0xac400808, 0x00a01821, 0x3c058000, 0x8f4201b8,
+ 0x00451024, 0x1440fffd, 0x24020002, 0xa082000b, 0xa4830008, 0xa4870010,
+ 0x8f420144, 0x3c031000, 0xa4820012, 0x03e00008, 0xaf4301b8, 0x30e2ffff,
+ 0x14400028, 0x00071c02, 0x93620005, 0x30420004, 0x14400020, 0x3c029000,
+ 0x34420001, 0x00c21025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024,
+ 0x1440fffd, 0x00000000, 0x93620005, 0x3c038000, 0x34630001, 0x00c31825,
+ 0x34420004, 0xa3620005, 0xaf430020, 0x93620005, 0x30420004, 0x14400003,
+ 0x3c038000, 0x0000000d, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x24020005, 0x3c031000, 0xac860000, 0xa082000b, 0xaf4301b8, 0x0a00073d,
+ 0x00071c02, 0x0000000d, 0x03e00008, 0x00000000, 0x00071c02, 0x3c058000,
+ 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002,
+ 0xac860000, 0xac800004, 0xa082000a, 0xa083000b, 0xa4870010, 0x8f430144,
+ 0x3c021000, 0xac800028, 0xac830024, 0x03e00008, 0xaf4201b8, 0x00071c02,
+ 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002, 0xac800000,
+ 0xac860004, 0xa4830008, 0xa082000a, 0xa082000b, 0xa4870010, 0xac800024,
+ 0x8f420144, 0x3c031000, 0xac820028, 0x03e00008, 0xaf4301b8, 0x00071c02,
+ 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008,
+ 0x24030002, 0xa082000a, 0x3c021000, 0xac860000, 0xac800004, 0xa083000b,
+ 0xa4870010, 0xac800024, 0xac800028, 0x03e00008, 0xaf4201b8, 0x3c058000,
+ 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002, 0xac860000, 0xac800004,
+ 0xa4830008, 0xa080000a, 0x0a000748, 0xa082000b, 0x0000000d, 0x03e00008,
+ 0x00000000, 0x03e00008, 0x00000000, 0x8f420100, 0x3042003e, 0x14400011,
+ 0x24020001, 0xaf400048, 0x8f420100, 0x304207c0, 0x10400005, 0x00000000,
+ 0xaf40004c, 0xaf400050, 0x03e00008, 0x24020001, 0xaf400054, 0xaf400040,
+ 0x8f420100, 0x30423800, 0x54400001, 0xaf400044, 0x24020001, 0x03e00008,
+ 0x00000000, 0x3c029000, 0x34420001, 0x00822025, 0xaf440020, 0x3c038000,
+ 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x03e00008, 0x00000000,
+ 0x3c028000, 0x34420001, 0x00822025, 0x03e00008, 0xaf440020, 0x8f430128,
+ 0x27420180, 0xac430000, 0x8f650040, 0x240340c1, 0xa4430008, 0x24030002,
+ 0xa044000a, 0x24040008, 0xa043000b, 0x3c031000, 0xa4440010, 0xa0400012,
+ 0xa0400013, 0xac400014, 0xac400024, 0xac400028, 0xac40002c, 0xac450018,
+ 0x03e00008, 0xaf4301b8, 0x24020001, 0xacc40000, 0x03e00008, 0xa4e50000,
+ 0x03e00008, 0x24020001, 0x24020001, 0xaf400044, 0x03e00008, 0xaf400050,
+ 0x00803021, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x00000000, 0x8f420128, 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008,
+ 0xaca30018, 0x90c4000a, 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010,
+ 0xa4a20010, 0x90c30012, 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014,
+ 0xaca30014, 0x8cc20024, 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc2002c,
+ 0x3c031000, 0xaca2002c, 0x24020001, 0xaf4301b8, 0xaf400044, 0x03e00008,
+ 0xaf400050, 0x27bdffe8, 0xafbf0010, 0x0e000326, 0x00000000, 0x00002021,
+ 0x0e00004c, 0xaf400180, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x8f460148,
+ 0x27450180, 0x3c038000, 0x00061402, 0x304700ff, 0x8f4201b8, 0x00431024,
+ 0x1440fffd, 0x00000000, 0x8f440140, 0x00061202, 0x304200ff, 0x00061c02,
+ 0xaca20004, 0x24020002, 0xa4a30008, 0x30c300ff, 0xa0a2000b, 0xaca30024,
+ 0x10e0000a, 0xaca40000, 0x28e20004, 0x14400005, 0x24020001, 0x24020005,
+ 0x54e20005, 0xa0a0000a, 0x24020001, 0x0a000816, 0xa0a2000a, 0xa0a0000a,
+ 0x3c021000, 0x03e00008, 0xaf4201b8, 0x03e00008, 0x00001021, 0x10c00007,
+ 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000, 0x14c0fffb,
+ 0x24840004, 0x03e00008, 0x00000000, 0x0a00082a, 0x00a01021, 0xac860000,
+ 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, 0x03e00008, 0x00000000,
+ 0x00000000 };
+
+static u32 bnx2_RXP_b06FwData[(0x0/4) + 1] = { 0x00000000 };
+static u32 bnx2_RXP_b06FwRodata[(0x0/4) + 1] = { 0x00000000 };
+static u32 bnx2_RXP_b06FwBss[(0x239c/4) + 1] = { 0x00000000 };
+static u32 bnx2_RXP_b06FwSbss[(0x14/4) + 1] = { 0x00000000 };
+
+static u32 bnx2_rv2p_proc1[] = {
+ 0x00000008, 0xac000001, 0x0000000c, 0x2f800001, 0x00000010, 0x213f0004,
+ 0x00000010, 0x20bf002c, 0x00000010, 0x203f0143, 0x00000018, 0x8000fffd,
+ 0x00000010, 0xb1b8b017, 0x0000000b, 0x2fdf0002, 0x00000000, 0x03d80000,
+ 0x00000000, 0x2c380000, 0x00000008, 0x2c800000, 0x00000008, 0x2d000000,
+ 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, 0x00000008, 0x02000002,
+ 0x00000010, 0x91de0000, 0x0000000f, 0x42e0001c, 0x00000010, 0x91840a08,
+ 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, 0x00000008, 0x2d800150,
+ 0x00000000, 0x00000000, 0x00000010, 0x91de0000, 0x00000010, 0x2c620002,
+ 0x00000018, 0x80000012, 0x0000000b, 0x2fdf0002, 0x0000000c, 0x1f800002,
+ 0x00000000, 0x2c070000, 0x00000018, 0x8000ffe6, 0x00000008, 0x02000002,
+ 0x0000000f, 0x42e0001c, 0x00000010, 0x91840a08, 0x00000008, 0x2c8000b0,
+ 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800108,
+ 0x00000000, 0x00000000, 0x00000010, 0x91de0000, 0x00000018, 0x80000004,
+ 0x0000000c, 0x1f800002, 0x00000000, 0x00000000, 0x00000018, 0x8000ffd9,
+ 0x0000000c, 0x29800002, 0x0000000c, 0x1f800002, 0x00000000, 0x2adf0000,
+ 0x00000008, 0x2a000005, 0x00000018, 0x8000ffd4, 0x00000008, 0x02240030,
+ 0x00000018, 0x00040000, 0x00000018, 0x80000015, 0x00000018, 0x80000017,
+ 0x00000018, 0x8000001b, 0x00000018, 0x8000004c, 0x00000018, 0x8000008c,
+ 0x00000018, 0x8000000f, 0x00000018, 0x8000000e, 0x00000018, 0x8000000d,
+ 0x00000018, 0x8000000c, 0x00000018, 0x800000c2, 0x00000018, 0x8000000a,
+ 0x00000018, 0x80000009, 0x00000018, 0x80000008, 0x00000018, 0x800000fd,
+ 0x00000018, 0x80000006, 0x00000018, 0x80000005, 0x00000018, 0x800000ff,
+ 0x00000018, 0x80000104, 0x00000018, 0x80000002, 0x00000018, 0x80000098,
+ 0x00000018, 0x80000000, 0x0000000c, 0x1f800001, 0x00000000, 0x00000000,
+ 0x00000018, 0x8000ffba, 0x00000010, 0x91d40000, 0x0000000c, 0x29800001,
+ 0x0000000c, 0x1f800001, 0x00000008, 0x2a000002, 0x00000018, 0x8000ffb5,
+ 0x00000010, 0xb1a0b012, 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c200000,
+ 0x00000008, 0x2c800000, 0x00000008, 0x2d000000, 0x00000010, 0x91d40000,
+ 0x00000008, 0x2d80011c, 0x00000000, 0x00000000, 0x00000010, 0x91de0000,
+ 0x0000000f, 0x47600008, 0x0000000f, 0x060e0001, 0x00000010, 0x001f0000,
+ 0x00000000, 0x0f580000, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000,
+ 0x00000000, 0x0b660000, 0x00000000, 0x0d610000, 0x00000018, 0x80000013,
+ 0x0000000f, 0x47600008, 0x0000000b, 0x2fdf0002, 0x00000008, 0x2c800000,
+ 0x00000008, 0x2d000000, 0x00000010, 0x91d40000, 0x00000008, 0x2d80011c,
+ 0x0000000f, 0x060e0001, 0x00000010, 0x001f0000, 0x00000000, 0x0f580000,
+ 0x00000010, 0x91de0000, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000,
+ 0x00000000, 0x0b660000, 0x00000000, 0x0d610000, 0x00000000, 0x02620000,
+ 0x0000000b, 0x2fdf0002, 0x00000000, 0x309a0000, 0x00000000, 0x31040000,
+ 0x00000000, 0x0c961800, 0x00000009, 0x0c99ffff, 0x00000004, 0xcc993400,
+ 0x00000010, 0xb1963202, 0x00000008, 0x0f800000, 0x0000000c, 0x29800001,
+ 0x00000010, 0x00220002, 0x0000000c, 0x29520001, 0x0000000c, 0x29520000,
+ 0x00000008, 0x22000001, 0x0000000c, 0x1f800001, 0x00000000, 0x2adf0000,
+ 0x00000008, 0x2a000003, 0x00000018, 0x8000ff83, 0x00000010, 0xb1a0b01d,
+ 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c200000, 0x00000008, 0x2c8000b0,
+ 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800150,
+ 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000008, 0x2c800000,
+ 0x00000008, 0x2d000000, 0x00000008, 0x2d800108, 0x00000000, 0x00000000,
+ 0x00000010, 0x91de0000, 0x0000000f, 0x47600008, 0x00000000, 0x060e0000,
+ 0x00000010, 0x001f0000, 0x00000000, 0x0f580000, 0x00000010, 0x91de0000,
+ 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, 0x00000000, 0x0b670000,
+ 0x00000000, 0x0d620000, 0x00000000, 0x0ce71800, 0x00000009, 0x0c99ffff,
+ 0x00000004, 0xcc993400, 0x00000010, 0xb1963220, 0x00000008, 0x0f800000,
+ 0x00000018, 0x8000001e, 0x0000000f, 0x47600008, 0x0000000b, 0x2fdf0002,
+ 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, 0x00000010, 0x91d40000,
+ 0x00000008, 0x2d80012c, 0x0000000f, 0x060e0001, 0x00000010, 0x001f0000,
+ 0x00000000, 0x0f580000, 0x00000010, 0x91de0000, 0x00000000, 0x0a640000,
+ 0x00000000, 0x0ae50000, 0x00000000, 0x0b670000, 0x00000000, 0x0d620000,
+ 0x00000000, 0x02630000, 0x0000000f, 0x47620010, 0x00000000, 0x0ce71800,
+ 0x0000000b, 0x2fdf0002, 0x00000000, 0x311a0000, 0x00000000, 0x31840000,
+ 0x0000000b, 0xc20000ff, 0x00000002, 0x42040000, 0x00000001, 0x31620800,
+ 0x0000000f, 0x020e0010, 0x00000002, 0x31620800, 0x00000009, 0x0c99ffff,
+ 0x00000004, 0xcc993400, 0x00000010, 0xb1963202, 0x00000008, 0x0f800000,
+ 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x0000000c, 0x61420006,
+ 0x00000008, 0x22000008, 0x00000000, 0x2adf0000, 0x00000008, 0x2a000004,
+ 0x00000018, 0x8000ff42, 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008,
+ 0x00000010, 0x91a0b008, 0x00000010, 0x91d40000, 0x0000000c, 0x31620018,
+ 0x00000008, 0x2d800001, 0x00000000, 0x00000000, 0x00000010, 0x91de0000,
+ 0x00000008, 0xac000001, 0x00000018, 0x8000000e, 0x00000000, 0x0380b000,
+ 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c004000, 0x00000010, 0x91d40000,
+ 0x00000008, 0x2d800101, 0x00000000, 0x00000000, 0x00000010, 0x91de0000,
+ 0x0000000c, 0x31620018, 0x00000008, 0x2d800001, 0x00000000, 0x00000000,
+ 0x00000010, 0x91de0000, 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c000e00,
+ 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x00000008, 0x2a000007,
+ 0x00000018, 0x8000ff27, 0x00000010, 0xb1a0b016, 0x0000000b, 0x2fdf0002,
+ 0x00000000, 0x03d80000, 0x00000000, 0x2c200000, 0x00000008, 0x2c8000b0,
+ 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800150,
+ 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000008, 0x2c800000,
+ 0x00000008, 0x2d000000, 0x00000008, 0x2d800108, 0x00000008, 0x07000001,
+ 0x00000010, 0xb5de1c00, 0x00000010, 0x2c620002, 0x00000018, 0x8000000a,
+ 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c070000, 0x0000000c, 0x1f800001,
+ 0x00000010, 0x91de0000, 0x00000018, 0x8000ff11, 0x00000008, 0x2c8000b0,
+ 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800108,
+ 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x00000010, 0x91de0000,
+ 0x00000000, 0x2adf0000, 0x00000008, 0x2a00000a, 0x00000018, 0x8000ff07,
+ 0x00000000, 0x82265600, 0x0000000f, 0x47220008, 0x00000009, 0x070e000f,
+ 0x00000008, 0x070e0008, 0x00000008, 0x02800001, 0x00000007, 0x02851c00,
+ 0x00000008, 0x82850001, 0x00000000, 0x02840a00, 0x00000007, 0x42851c00,
+ 0x00000003, 0xc3aa5200, 0x00000000, 0x03b10e00, 0x00000010, 0x001f0000,
+ 0x0000000f, 0x0f280007, 0x00000007, 0x4b071c00, 0x00000000, 0x00000000,
+ 0x0000000f, 0x0a960003, 0x00000000, 0x0a955c00, 0x00000000, 0x4a005a00,
+ 0x00000000, 0x0c960a00, 0x00000009, 0x0c99ffff, 0x00000008, 0x0d00ffff,
+ 0x00000010, 0xb1963202, 0x00000008, 0x0f800005, 0x00000010, 0x00220020,
+ 0x00000000, 0x02a70000, 0x00000010, 0xb1850002, 0x00000008, 0x82850200,
+ 0x00000000, 0x02000000, 0x00000000, 0x03a60000, 0x00000018, 0x8000004e,
+ 0x00000000, 0x072b0000, 0x00000001, 0x878c1c00, 0x00000000, 0x870e1e00,
+ 0x00000000, 0x860c1e00, 0x00000000, 0x03061e00, 0x00000010, 0xb18e0003,
+ 0x00000018, 0x80000047, 0x00000018, 0x8000fffa, 0x00000010, 0x918c0003,
+ 0x00000010, 0xb1870002, 0x00000018, 0x80000043, 0x00000010, 0x91d40000,
+ 0x0000000c, 0x29800001, 0x00000000, 0x2a860000, 0x00000000, 0x230c0000,
+ 0x00000000, 0x2b070000, 0x00000010, 0xb187000e, 0x00000008, 0x2a000008,
+ 0x00000018, 0x8000003b, 0x00000010, 0x91d40000, 0x00000000, 0x28d18c00,
+ 0x00000000, 0x2a860000, 0x00000000, 0x230c0000, 0x00000000, 0x2b070000,
+ 0x00000018, 0x8000fff8, 0x00000010, 0x91d40000, 0x0000000c, 0x29800001,
+ 0x00000000, 0x2aab0000, 0x00000000, 0xa3265600, 0x00000000, 0x2b000000,
+ 0x0000000c, 0x1f800001, 0x00000008, 0x2a000008, 0x00000018, 0x8000fec8,
+ 0x00000010, 0x91d40000, 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001,
+ 0x00000008, 0x2a000009, 0x00000018, 0x8000fec3, 0x00000010, 0x91d40000,
+ 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x00000000, 0x29420000,
+ 0x00000008, 0x2a000002, 0x00000018, 0x8000febd, 0x00000018, 0x8000febc,
+ 0x00000010, 0xb1bcb016, 0x0000000b, 0x2fdf0002, 0x00000000, 0x03d80000,
+ 0x00000000, 0x2c3c0000, 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008,
+ 0x00000010, 0x91d40000, 0x00000008, 0x2d800150, 0x00000000, 0x00000000,
+ 0x00000010, 0x205f0000, 0x00000008, 0x2c800000, 0x00000008, 0x2d000000,
+ 0x00000008, 0x2d800108, 0x00000008, 0x07000001, 0x00000010, 0xb5de1c00,
+ 0x00000010, 0x2c620002, 0x00000018, 0x8000000a, 0x0000000b, 0x2fdf0002,
+ 0x00000000, 0x2c070000, 0x0000000c, 0x1f800000, 0x00000010, 0x91de0000,
+ 0x00000018, 0x8000fea6, 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008,
+ 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, 0x0000000c, 0x29800000,
+ 0x0000000c, 0x1f800000, 0x00000010, 0x91de0000, 0x00000000, 0x2adf0000,
+ 0x00000008, 0x2a000006, 0x00000018, 0x8000fe9c, 0x00000008, 0x03050004,
+ 0x00000006, 0x83040c00, 0x00000008, 0x02850200, 0x00000000, 0x86050c00,
+ 0x00000001, 0x860c0e00, 0x00000008, 0x02040004, 0x00000000, 0x02041800,
+ 0x00000000, 0x83871800, 0x00000018, 0x00020000 };
+
+static u32 bnx2_rv2p_proc2[] = {
+ 0x00000000, 0x2a000000, 0x00000010, 0xb1d40000, 0x00000008, 0x02540003,
+ 0x00000018, 0x00040000, 0x00000018, 0x8000000a, 0x00000018, 0x8000000a,
+ 0x00000018, 0x8000000e, 0x00000018, 0x80000056, 0x00000018, 0x800001b9,
+ 0x00000018, 0x800001e1, 0x00000018, 0x8000019b, 0x00000018, 0x800001f9,
+ 0x00000018, 0x8000019f, 0x00000018, 0x800001a6, 0x00000018, 0x80000000,
+ 0x0000000c, 0x29800001, 0x00000000, 0x2a000000, 0x0000000c, 0x29800000,
+ 0x00000010, 0x20530000, 0x00000018, 0x8000ffee, 0x0000000c, 0x29800001,
+ 0x00000010, 0x91de0000, 0x00000010, 0x001f0000, 0x00000000, 0x2f80aa00,
+ 0x00000000, 0x2a000000, 0x00000000, 0x0d610000, 0x00000000, 0x03620000,
+ 0x00000000, 0x2c400000, 0x00000000, 0x02638c00, 0x00000000, 0x26460000,
+ 0x00000010, 0x00420002, 0x00000008, 0x02040012, 0x00000010, 0xb9060836,
+ 0x00000000, 0x0f580000, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000,
+ 0x00000000, 0x0b660000, 0x00000000, 0x0c000000, 0x00000000, 0x0b800000,
+ 0x00000010, 0x00420009, 0x00000008, 0x0cc60012, 0x00000008, 0x0f800003,
+ 0x00000000, 0x00000000, 0x00000010, 0x009f0000, 0x00000008, 0x27110012,
+ 0x00000000, 0x66900000, 0x00000008, 0xa31b0012, 0x00000018, 0x80000008,
+ 0x00000000, 0x0cc60000, 0x00000008, 0x0f800003, 0x00000000, 0x00000000,
+ 0x00000010, 0x009f0000, 0x00000000, 0x27110000, 0x00000000, 0x66900000,
+ 0x00000000, 0x231b0000, 0x00000010, 0xb197320e, 0x00000000, 0x25960000,
+ 0x00000000, 0x021b0000, 0x00000010, 0x001f0000, 0x00000008, 0x0f800003,
+ 0x0000000c, 0x29800000, 0x00000010, 0x20530000, 0x00000000, 0x22c50800,
+ 0x00000010, 0x009f0000, 0x00000000, 0x27002200, 0x00000000, 0x26802000,
+ 0x00000000, 0x231b0000, 0x0000000c, 0x69520001, 0x00000018, 0x8000fff3,
+ 0x00000010, 0x01130002, 0x00000010, 0xb1980003, 0x00000010, 0x001f0000,
+ 0x00000008, 0x0f800004, 0x00000008, 0x22000003, 0x00000008, 0x2c80000c,
+ 0x00000008, 0x2d00000c, 0x00000010, 0x009f0000, 0x00000000, 0x25960000,
+ 0x0000000c, 0x29800000, 0x00000000, 0x32140000, 0x00000000, 0x32950000,
+ 0x00000000, 0x33160000, 0x00000000, 0x31e32e00, 0x00000008, 0x2d800010,
+ 0x00000010, 0x20530000, 0x00000018, 0x8000ffac, 0x00000000, 0x23000000,
+ 0x00000000, 0x25e60000, 0x00000008, 0x2200000b, 0x0000000c, 0x69520000,
+ 0x0000000c, 0x29800000, 0x00000010, 0x20530000, 0x00000018, 0x8000ffa5,
+ 0x0000000c, 0x29800001, 0x00000010, 0x91de0000, 0x00000000, 0x2fd50000,
+ 0x00000010, 0x001f0000, 0x00000000, 0x02700000, 0x00000000, 0x0d620000,
+ 0x00000000, 0xbb630800, 0x00000000, 0x2a000000, 0x00000009, 0x076000ff,
+ 0x0000000f, 0x2c0e0007, 0x00000008, 0x2c800000, 0x00000008, 0x2d000064,
+ 0x00000008, 0x2d80011c, 0x00000009, 0x06420002, 0x0000000c, 0x61420001,
+ 0x00000000, 0x0f400000, 0x00000000, 0x02d08c00, 0x00000000, 0x23000000,
+ 0x00000004, 0x826da000, 0x00000000, 0x8304a000, 0x00000000, 0x22c50c00,
+ 0x00000000, 0x03760000, 0x00000004, 0x83860a00, 0x00000000, 0x83870c00,
+ 0x00000010, 0x91de0000, 0x00000000, 0x037c0000, 0x00000000, 0x837b0c00,
+ 0x00000001, 0x83060e00, 0x00000000, 0x83870c00, 0x00000000, 0x82850e00,
+ 0x00000010, 0xb1860016, 0x0000000f, 0x47610018, 0x00000000, 0x068e0000,
+ 0x0000000f, 0x47670010, 0x0000000f, 0x47e20010, 0x00000000, 0x870e1e00,
+ 0x00000010, 0xb70e1a10, 0x00000010, 0x0ce7000e, 0x00000008, 0x22000009,
+ 0x00000000, 0x286d0000, 0x0000000f, 0x65680010, 0x00000003, 0xf66c9400,
+ 0x00000010, 0xb972a003, 0x0000000c, 0x73e70019, 0x0000000c, 0x21420004,
+ 0x00000018, 0x8000023f, 0x00000000, 0x37ed0000, 0x0000000c, 0x73e7001a,
+ 0x00000010, 0x20530000, 0x00000008, 0x22000008, 0x0000000c, 0x61420004,
+ 0x00000000, 0x02f60000, 0x00000004, 0x82840a00, 0x00000010, 0xb1840a2b,
+ 0x00000010, 0x2d67000a, 0x00000010, 0xb96d0804, 0x00000004, 0xb6ed0a00,
+ 0x00000000, 0x37ed0000, 0x00000018, 0x80000029, 0x0000000c, 0x61420000,
+ 0x00000000, 0x37040000, 0x00000000, 0x37850000, 0x0000000c, 0x33e7001a,
+ 0x00000018, 0x80000024, 0x00000010, 0xb96d0809, 0x00000004, 0xb6ed0a00,
+ 0x00000000, 0x036d0000, 0x00000004, 0xb76e0c00, 0x00000010, 0x91ee0c1f,
+ 0x0000000c, 0x73e7001a, 0x00000004, 0xb6ef0c00, 0x00000000, 0x37ed0000,
+ 0x00000018, 0x8000001b, 0x0000000c, 0x61420000, 0x00000010, 0xb7ee0a05,
+ 0x00000010, 0xb96f0815, 0x00000003, 0xb76e0800, 0x00000004, 0xb7ef0a00,
+ 0x00000018, 0x80000015, 0x00000010, 0x0ce7000c, 0x00000008, 0x22000009,
+ 0x00000000, 0x286d0000, 0x0000000f, 0x65680010, 0x00000003, 0xf66c9400,
+ 0x00000010, 0xb972a003, 0x0000000c, 0x73e70019, 0x0000000c, 0x21420004,
+ 0x00000018, 0x80000215, 0x00000010, 0x20530000, 0x00000008, 0x22000008,
+ 0x0000000c, 0x61420004, 0x00000000, 0x37040000, 0x00000000, 0x37850000,
+ 0x00000000, 0x036d0000, 0x00000003, 0xb8f10c00, 0x00000018, 0x80000004,
+ 0x00000000, 0x02840000, 0x00000002, 0x21421800, 0x0000000c, 0x61420000,
+ 0x00000000, 0x286d0000, 0x0000000f, 0x65ed0010, 0x00000009, 0x266dffff,
+ 0x00000000, 0x23000000, 0x00000010, 0xb1840a3d, 0x00000010, 0x01420002,
+ 0x00000004, 0xb8f10a00, 0x00000003, 0x83760a00, 0x00000010, 0xb8040c39,
+ 0x00000010, 0xb7e6080a, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000,
+ 0x00000009, 0x0c68ffff, 0x00000009, 0x0b67ffff, 0x00000000, 0x0be60000,
+ 0x00000000, 0x0c840000, 0x00000010, 0xb197320c, 0x00000008, 0x0f800002,
+ 0x00000018, 0x8000000a, 0x00000000, 0x0a6a0000, 0x00000000, 0x0aeb0000,
+ 0x00000000, 0x0c000000, 0x00000009, 0x0b6cffff, 0x00000000, 0x0be90000,
+ 0x00000000, 0x0c840000, 0x00000010, 0xb1973203, 0x00000008, 0x0f800002,
+ 0x00000018, 0x80000001, 0x00000010, 0x001f0000, 0x00000000, 0x0c860000,
+ 0x00000000, 0x06980000, 0x00000008, 0x0f800003, 0x00000000, 0x00000000,
+ 0x00000010, 0x009f0000, 0x00000010, 0xb1973210, 0x00000000, 0x231b0000,
+ 0x00000000, 0x02043600, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010,
+ 0x00000009, 0x2607ffff, 0x00000000, 0x27111a00, 0x00000000, 0x66900000,
+ 0x0000000c, 0x29000000, 0x00000018, 0x800001de, 0x00000000, 0x06980000,
+ 0x00000010, 0x20530000, 0x00000000, 0x22c58c00, 0x00000010, 0x001f0000,
+ 0x00000008, 0x0f800003, 0x00000018, 0x8000fff0, 0x00000000, 0x02043600,
+ 0x00000000, 0x231b0000, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010,
+ 0x00000009, 0x2607ffff, 0x00000000, 0x27111a00, 0x00000000, 0x66900000,
+ 0x0000000c, 0x29000000, 0x00000010, 0x91840a02, 0x00000002, 0x21421800,
+ 0x00000000, 0x32140000, 0x00000000, 0x32950000, 0x00000005, 0x73e72c00,
+ 0x00000005, 0x74683000, 0x00000000, 0x33170000, 0x00000018, 0x80000138,
+ 0x00000010, 0x91c60004, 0x00000008, 0x07000004, 0x00000010, 0xb1c41c02,
+ 0x00000010, 0x91840a04, 0x00000018, 0x800001c3, 0x00000010, 0x20530000,
+ 0x00000000, 0x22c58c00, 0x00000010, 0xb1840a8e, 0x0000000c, 0x21420006,
+ 0x00000010, 0x0ce7001a, 0x0000000f, 0x43680010, 0x00000000, 0x03f30c00,
+ 0x00000010, 0x91870850, 0x0000000f, 0x46ec0010, 0x00000010, 0xb68d0c4e,
+ 0x00000000, 0x838d0c00, 0x00000000, 0xa3050800, 0x00000001, 0xa3460e00,
+ 0x00000000, 0x02048c00, 0x00000010, 0x91840a02, 0x00000002, 0x21421800,
+ 0x00000010, 0x001f0000, 0x00000008, 0x22000008, 0x00000003, 0x8384a000,
+ 0x0000000f, 0x65870010, 0x00000009, 0x2607ffff, 0x00000000, 0x27750c00,
+ 0x00000000, 0x66f40000, 0x0000000c, 0x29000000, 0x00000018, 0x800001aa,
+ 0x00000000, 0x03068c00, 0x00000003, 0xf4680c00, 0x00000010, 0x20530000,
+ 0x00000000, 0x22c58c00, 0x00000018, 0x8000ffe5, 0x00000000, 0x39760000,
+ 0x00000000, 0x39840000, 0x0000000c, 0x33e70019, 0x00000010, 0x001f0000,
+ 0x00000000, 0x031e0000, 0x00000000, 0x0760fe00, 0x0000000f, 0x0f0e0007,
+ 0x00000000, 0x83850800, 0x00000000, 0x0a7d0000, 0x00000000, 0x0afe0000,
+ 0x00000000, 0x0b7f0000, 0x00000000, 0x0d7a0000, 0x00000000, 0x0c000000,
+ 0x00000000, 0x0bfc0000, 0x00000000, 0x0c970e00, 0x00000008, 0x0f800003,
+ 0x0000000f, 0x47670010, 0x00000008, 0x070e0001, 0x0000000b, 0xc38000ff,
+ 0x00000002, 0x43870000, 0x00000001, 0x33e70e00, 0x0000000f, 0x038e0010,
+ 0x00000002, 0x33e70e00, 0x00000000, 0x28f30000, 0x00000010, 0x009f0000,
+ 0x00000000, 0x02043600, 0x00000010, 0x91840a02, 0x00000002, 0x21421800,
+ 0x00000008, 0x22000006, 0x00000000, 0x231b0000, 0x00000000, 0x23ff0000,
+ 0x00000000, 0x241b0000, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010,
+ 0x00000009, 0x2607ffff, 0x00000000, 0x27110000, 0x00000000, 0x26900000,
+ 0x0000000c, 0x29000000, 0x00000018, 0x8000017e, 0x00000003, 0xf4683600,
+ 0x00000000, 0x3a100000, 0x00000000, 0x3a910000, 0x00000003, 0xf66c2400,
+ 0x00000010, 0x001f0000, 0x00000010, 0xb1923604, 0x00000008, 0x0f800004,
+ 0x00000000, 0x00000000, 0x00000010, 0x009f0000, 0x00000000, 0x3e170000,
+ 0x00000000, 0x3e940000, 0x00000000, 0x3f150000, 0x00000000, 0x3f960000,
+ 0x00000010, 0x001f0000, 0x00000000, 0x0f060000, 0x00000010, 0x20530000,
+ 0x00000000, 0x22c53600, 0x00000018, 0x8000ffac, 0x00000010, 0x001f0000,
+ 0x00000000, 0x031e0000, 0x00000000, 0x83850800, 0x00000009, 0x076000ff,
+ 0x0000000f, 0x0f0e0007, 0x00000000, 0x0c000000, 0x00000000, 0x0a7d0000,
+ 0x00000000, 0x0afe0000, 0x00000000, 0x0b7f0000, 0x00000000, 0x0d7a0000,
+ 0x00000000, 0x0bfc0000, 0x00000000, 0x0c970e00, 0x00000008, 0x0f800003,
+ 0x0000000f, 0x47670010, 0x00000008, 0x070e0001, 0x0000000b, 0xc38000ff,
+ 0x00000002, 0x43870000, 0x00000001, 0x33e70e00, 0x0000000f, 0x038e0010,
+ 0x00000002, 0x33e70e00, 0x00000000, 0x39840000, 0x00000003, 0xb9720800,
+ 0x00000000, 0x28f30000, 0x0000000f, 0x65680010, 0x00000010, 0x009f0000,
+ 0x00000000, 0x02043600, 0x00000010, 0x91840a02, 0x00000002, 0x21421800,
+ 0x00000008, 0x22000007, 0x00000000, 0x231b0000, 0x00000000, 0x23ff0000,
+ 0x00000000, 0x241b0000, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010,
+ 0x00000009, 0x2607ffff, 0x00000000, 0x27110000, 0x00000000, 0x26900000,
+ 0x0000000c, 0x29000000, 0x00000018, 0x80000145, 0x00000003, 0xf4683600,
+ 0x00000000, 0x3a100000, 0x00000000, 0x3a910000, 0x00000003, 0xf66c2400,
+ 0x00000010, 0x001f0000, 0x00000010, 0xb1923604, 0x00000008, 0x0f800004,
+ 0x00000000, 0x00000000, 0x00000010, 0x009f0000, 0x00000000, 0x3e170000,
+ 0x00000000, 0x3e940000, 0x00000000, 0x3f150000, 0x00000000, 0x3f960000,
+ 0x00000010, 0x001f0000, 0x00000000, 0x0f060000, 0x00000010, 0x20530000,
+ 0x00000000, 0x22c53600, 0x00000018, 0x8000ff73, 0x00000010, 0x0ce70005,
+ 0x00000008, 0x2c80000c, 0x00000008, 0x2d000070, 0x00000008, 0x2d800010,
+ 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000018, 0x8000011d,
+ 0x00000000, 0x2c1e0000, 0x00000008, 0x2c8000b8, 0x00000008, 0x2d000010,
+ 0x00000008, 0x2d800048, 0x00000000, 0x00000000, 0x00000010, 0x91de0000,
+ 0x00000018, 0x8000fe5d, 0x0000000c, 0x29800001, 0x00000000, 0x2a000000,
+ 0x00000010, 0x001f0000, 0x00000000, 0x0f008000, 0x00000008, 0x0f800007,
+ 0x00000018, 0x80000006, 0x0000000c, 0x29800001, 0x00000000, 0x2a000000,
+ 0x00000010, 0x001f0000, 0x0000000f, 0x0f470007, 0x00000008, 0x0f800008,
+ 0x00000018, 0x80000119, 0x00000010, 0x20530000, 0x00000018, 0x8000fe4f,
+ 0x0000000c, 0x29800001, 0x00000010, 0x91de0000, 0x00000000, 0x2fd50000,
+ 0x00000000, 0x2a000000, 0x00000009, 0x0261ffff, 0x0000000d, 0x70e10001,
+ 0x00000018, 0x80000101, 0x00000000, 0x2c400000, 0x00000008, 0x2c8000c4,
+ 0x00000008, 0x2d00001c, 0x00000008, 0x2d800001, 0x00000005, 0x70e10800,
+ 0x00000010, 0x91de0000, 0x00000018, 0x8000fe41, 0x0000000c, 0x29800001,
+ 0x00000010, 0x91de0000, 0x00000000, 0x2fd50000, 0x00000010, 0x001f0000,
+ 0x00000000, 0x02700000, 0x00000000, 0x0d620000, 0x00000000, 0xbb630800,
+ 0x00000000, 0x2a000000, 0x00000000, 0x0f400000, 0x00000000, 0x2c400000,
+ 0x0000000c, 0x73e7001b, 0x00000010, 0x0ce7000e, 0x00000000, 0x286d0000,
+ 0x0000000f, 0x65ed0010, 0x00000009, 0x266dffff, 0x00000018, 0x80000069,
+ 0x00000008, 0x02000004, 0x00000010, 0x91c40803, 0x00000018, 0x800000f6,
+ 0x00000010, 0x20530000, 0x00000018, 0x800000e5, 0x00000008, 0x2c8000b8,
+ 0x00000008, 0x2d000010, 0x00000008, 0x2d800048, 0x00000018, 0x80000005,
+ 0x00000008, 0x2c8000c4, 0x00000008, 0x2d00001c, 0x00000008, 0x2d800001,
+ 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000008, 0x2c800048,
+ 0x00000008, 0x2d000068, 0x00000008, 0x2d800104, 0x00000000, 0x00000000,
+ 0x00000010, 0x91de0000, 0x00000000, 0x27f60000, 0x00000010, 0xb87a9e04,
+ 0x00000008, 0x2200000d, 0x00000018, 0x800000e2, 0x00000010, 0x20530000,
+ 0x00000018, 0x8000fe18, 0x0000000c, 0x29800001, 0x00000010, 0x91de0000,
+ 0x00000000, 0x2fd50000, 0x00000010, 0x001f0000, 0x00000000, 0x02700000,
+ 0x00000000, 0x0d620000, 0x00000000, 0xbb630800, 0x00000000, 0x2a000000,
+ 0x00000010, 0x0e670011, 0x00000000, 0x286d0000, 0x0000000f, 0x65ed0010,
+ 0x00000009, 0x266dffff, 0x00000004, 0xb8f1a000, 0x00000000, 0x0f400000,
+ 0x0000000c, 0x73e7001c, 0x00000018, 0x80000040, 0x00000008, 0x02000004,
+ 0x00000010, 0x91c40802, 0x00000018, 0x800000cd, 0x00000000, 0x2c1e0000,
+ 0x00000008, 0x2c8000b8, 0x00000008, 0x2d000010, 0x00000008, 0x2d800048,
+ 0x00000010, 0x20530000, 0x00000010, 0x91de0000, 0x00000018, 0x8000fdfe,
+ 0x0000000c, 0x29800001, 0x00000000, 0x03550000, 0x00000000, 0x06460000,
+ 0x00000000, 0x03d60000, 0x00000000, 0x2a000000, 0x0000000f, 0x0f480007,
+ 0x00000010, 0xb18c0027, 0x0000000f, 0x47420008, 0x00000009, 0x070e000f,
+ 0x00000008, 0x070e0008, 0x00000010, 0x001f0000, 0x00000008, 0x09000001,
+ 0x00000007, 0x09121c00, 0x00000003, 0xcbca9200, 0x00000000, 0x0b97a200,
+ 0x00000007, 0x4b171c00, 0x0000000f, 0x0a960003, 0x00000000, 0x0a959c00,
+ 0x00000000, 0x4a009a00, 0x00000008, 0x82120001, 0x00000001, 0x0c170800,
+ 0x00000000, 0x02180000, 0x00000000, 0x0c971800, 0x00000008, 0x0d00ffff,
+ 0x00000008, 0x0f800006, 0x0000000c, 0x29000000, 0x00000008, 0x22000001,
+ 0x00000000, 0x22c50c00, 0x00000010, 0x009f0000, 0x00000010, 0xb197320b,
+ 0x00000000, 0x231b0000, 0x00000000, 0x27110800, 0x00000000, 0x66900000,
+ 0x00000018, 0x800000a4, 0x00000000, 0x02180000, 0x00000010, 0x20530000,
+ 0x00000000, 0x22c53600, 0x00000010, 0x001f0000, 0x00000008, 0x0f800006,
+ 0x00000018, 0x8000fff5, 0x00000010, 0x91870002, 0x00000008, 0x2200000a,
+ 0x00000000, 0x231b0000, 0x00000000, 0x27110800, 0x00000000, 0x66900000,
+ 0x00000018, 0x80000098, 0x00000008, 0x0200000a, 0x00000010, 0x91c40804,
+ 0x00000010, 0x02c20003, 0x00000010, 0x001f0000, 0x00000008, 0x0f800008,
+ 0x00000010, 0x20530000, 0x00000018, 0x8000fdc9, 0x00000000, 0x06820000,
+ 0x00000010, 0x001f0000, 0x00000010, 0x0ce70028, 0x00000000, 0x03720000,
+ 0x00000000, 0xa8760c00, 0x00000000, 0x0cf60000, 0x00000010, 0xb8723224,
+ 0x00000000, 0x03440000, 0x00000008, 0x22000010, 0x00000000, 0x03ca0000,
+ 0x0000000f, 0x65680010, 0x00000000, 0x0bcf0000, 0x00000000, 0x27f20000,
+ 0x00000010, 0xb7ef3203, 0x0000000c, 0x21420004, 0x0000000c, 0x73e70019,
+ 0x00000000, 0x07520000, 0x00000000, 0x29000000, 0x00000018, 0x8000007e,
+ 0x00000004, 0xb9723200, 0x00000010, 0x20530000, 0x00000000, 0x22060000,
+ 0x0000000c, 0x61420004, 0x00000000, 0x25070000, 0x00000000, 0x27970000,
+ 0x00000000, 0x290e0000, 0x00000010, 0x0ce70010, 0x00000010, 0xb873320f,
+ 0x0000000f, 0x436c0010, 0x00000000, 0x03f30c00, 0x00000000, 0x03f30000,
+ 0x00000000, 0x83990e00, 0x00000001, 0x83860e00, 0x00000000, 0x83060e00,
+ 0x00000003, 0xf66c0c00, 0x00000000, 0x39f30e00, 0x00000000, 0x3af50e00,
+ 0x00000000, 0x7a740000, 0x0000000f, 0x43680010, 0x00000001, 0x83860e00,
+ 0x00000000, 0x83060e00, 0x00000003, 0xf4680c00, 0x00000000, 0x286d0000,
+ 0x00000000, 0x03690000, 0x00000010, 0xb1f60c54, 0x00000000, 0x0a6a0000,
+ 0x00000000, 0x0aeb0000, 0x00000009, 0x0b6cffff, 0x00000000, 0x0c000000,
+ 0x00000000, 0x0be90000, 0x00000003, 0x8cf6a000, 0x0000000c, 0x09800002,
+ 0x00000010, 0x009f0000, 0x00000010, 0xb8173209, 0x00000000, 0x35140000,
+ 0x00000000, 0x35950000, 0x00000005, 0x766c2c00, 0x00000000, 0x34970000,
+ 0x00000004, 0xb8f12e00, 0x00000010, 0x001f0000, 0x00000008, 0x0f800004,
+ 0x00000018, 0x8000fff7, 0x00000000, 0x03e90000, 0x00000010, 0xb8f6a01a,
+ 0x00000010, 0x20130019, 0x00000010, 0xb1f10e18, 0x00000000, 0x83973200,
+ 0x00000000, 0x38700e00, 0x00000000, 0xbb760e00, 0x00000000, 0x37d00000,
+ 0x0000000c, 0x73e7001a, 0x00000003, 0xb8f1a000, 0x00000000, 0x32140000,
+ 0x00000000, 0x32950000, 0x00000005, 0x73e72c00, 0x00000000, 0x33190000,
+ 0x00000005, 0x74680000, 0x00000010, 0x0ce7000d, 0x00000008, 0x22000009,
+ 0x00000000, 0x07520000, 0x00000000, 0x29000000, 0x0000000c, 0x73e70019,
+ 0x0000000f, 0x65680010, 0x0000000c, 0x21420004, 0x00000018, 0x8000003c,
+ 0x00000010, 0x20530000, 0x0000000c, 0x61420004, 0x00000000, 0x290e0000,
+ 0x00000018, 0x80000002, 0x00000010, 0x91973206, 0x00000000, 0x35140000,
+ 0x00000000, 0x35950000, 0x00000005, 0x766c2c00, 0x00000000, 0x34990000,
+ 0x00000004, 0xb8f13200, 0x00000000, 0x83690c00, 0x00000010, 0xb1860013,
+ 0x00000000, 0x28e90000, 0x00000008, 0x22000004, 0x00000000, 0x23ec0000,
+ 0x00000000, 0x03690000, 0x00000010, 0xb8660c07, 0x00000009, 0x036cffff,
+ 0x00000000, 0x326a0000, 0x00000000, 0x32eb0000, 0x00000005, 0x73e70c00,
+ 0x00000000, 0x33690000, 0x00000005, 0x74680000, 0x0000000c, 0x73e7001c,
+ 0x00000000, 0x03690000, 0x00000010, 0xb1f60c12, 0x00000010, 0xb1d00c11,
+ 0x0000000c, 0x21420005, 0x0000000c, 0x33e7001c, 0x00000018, 0x8000000e,
+ 0x00000010, 0x2e67000d, 0x00000000, 0x03690000, 0x00000010, 0xb1f60c0b,
+ 0x00000010, 0xb1d00c0a, 0x00000000, 0x03440000, 0x00000008, 0x2200000c,
+ 0x00000000, 0x07520000, 0x00000000, 0x29000000, 0x00000018, 0x80000015,
+ 0x0000000c, 0x33e7001c, 0x00000010, 0x20530000, 0x00000000, 0x22060000,
+ 0x00000000, 0x290e0000, 0x00000018, 0x000d0000, 0x00000000, 0x06820000,
+ 0x00000010, 0x2de7000d, 0x00000010, 0x0ce7000c, 0x00000000, 0x27f20000,
+ 0x00000010, 0xb96d9e0a, 0x00000000, 0xa86d9e00, 0x00000009, 0x0361ffff,
+ 0x00000010, 0xb7500c07, 0x00000008, 0x2200000f, 0x0000000f, 0x65680010,
+ 0x00000000, 0x29000000, 0x00000018, 0x80000004, 0x0000000c, 0x33e7001b,
+ 0x00000010, 0x20530000, 0x00000018, 0x000d0000, 0x00000000, 0x2b820000,
+ 0x00000010, 0x20d2002f, 0x00000010, 0x0052002e, 0x00000009, 0x054e0007,
+ 0x00000010, 0xb18a002c, 0x00000000, 0x050a8c00, 0x00000008, 0x850a0008,
+ 0x00000010, 0x918a0029, 0x00000003, 0xc5008800, 0x00000008, 0xa3460001,
+ 0x00000010, 0xb1c60007, 0x00000008, 0x22000001, 0x0000000c, 0x29800000,
+ 0x00000010, 0x20530000, 0x00000000, 0x274e8c00, 0x00000000, 0x66cd0000,
+ 0x00000000, 0x22c58c00, 0x00000008, 0x22000014, 0x00000003, 0x22c58e00,
+ 0x00000003, 0x23c58e00, 0x00000003, 0x22c58e00, 0x00000003, 0x26cd9e00,
+ 0x00000003, 0x27cd9e00, 0x00000003, 0x26cd9e00, 0x00000003, 0x274ea000,
+ 0x00000003, 0x284ea000, 0x00000003, 0x274ea000, 0x0000000c, 0x69520000,
+ 0x0000000c, 0x29800000, 0x00000010, 0x20530000, 0x00000003, 0x22c58e00,
+ 0x00000003, 0x23c58e00, 0x00000003, 0x22c58e00, 0x00000003, 0x26cd9e00,
+ 0x00000003, 0x27cd9e00, 0x00000003, 0x26cd9e00, 0x00000003, 0x274ea000,
+ 0x00000003, 0x284ea000, 0x00000003, 0x274ea000, 0x00000000, 0xa2c58c00,
+ 0x00000000, 0xa74e8c00, 0x00000000, 0xe6cd0000, 0x0000000f, 0x620a0010,
+ 0x00000008, 0x23460001, 0x0000000c, 0x29800000, 0x00000010, 0x20530000,
+ 0x0000000c, 0x29520000, 0x00000018, 0x80000002, 0x0000000c, 0x29800000,
+ 0x00000018, 0x00570000 };
+
+static int bnx2_TPAT_b06FwReleaseMajor = 0x0;
+static int bnx2_TPAT_b06FwReleaseMinor = 0x0;
+static int bnx2_TPAT_b06FwReleaseFix = 0x0;
+static u32 bnx2_TPAT_b06FwStartAddr = 0x08000858;
+static u32 bnx2_TPAT_b06FwTextAddr = 0x08000800;
+static int bnx2_TPAT_b06FwTextLen = 0x1314;
+static u32 bnx2_TPAT_b06FwDataAddr = 0x08001b40;
+static int bnx2_TPAT_b06FwDataLen = 0x0;
+static u32 bnx2_TPAT_b06FwRodataAddr = 0x00000000;
+static int bnx2_TPAT_b06FwRodataLen = 0x0;
+static u32 bnx2_TPAT_b06FwBssAddr = 0x08001b90;
+static int bnx2_TPAT_b06FwBssLen = 0x80;
+static u32 bnx2_TPAT_b06FwSbssAddr = 0x08001b40;
+static int bnx2_TPAT_b06FwSbssLen = 0x48;
+
+static u32 bnx2_TPAT_b06FwText[(0x1314/4) + 1] = {
+ 0x0a000216, 0x00000000, 0x00000000, 0x0000000d, 0x74706174, 0x20302e36,
+ 0x2e390000, 0x00060901, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x10000003,
+ 0x00000000, 0x0000000d, 0x0000000d, 0x3c020800, 0x24421b40, 0x3c030800,
+ 0x24631c10, 0xac400000, 0x0043202b, 0x1480fffd, 0x24420004, 0x3c1d0800,
+ 0x37bd3ffc, 0x03a0f021, 0x3c100800, 0x26100858, 0x3c1c0800, 0x279c1b40,
+ 0x0e00051f, 0x00000000, 0x0000000d, 0x8f820024, 0x27bdffe8, 0xafbf0014,
+ 0x10400004, 0xafb00010, 0x0000000d, 0x00000000, 0x2400015f, 0x8f82001c,
+ 0x8c450008, 0x24030800, 0xaf430178, 0x97430104, 0x3c020008, 0xaf420140,
+ 0x8f820034, 0x30420001, 0x10400006, 0x3070ffff, 0x24020002, 0x2603fffe,
+ 0xa7420146, 0x0a000246, 0xa7430148, 0xa7400146, 0x8f850034, 0x30a20020,
+ 0x0002102b, 0x00021023, 0x30460009, 0x30a30c00, 0x24020400, 0x14620002,
+ 0x34c40001, 0x34c40005, 0xa744014a, 0x3c020800, 0x8c440820, 0x3c030048,
+ 0x24020002, 0x00832025, 0x30a30006, 0x1062000d, 0x2c620003, 0x50400005,
+ 0x24020004, 0x10600012, 0x3c020001, 0x0a000271, 0x00000000, 0x10620007,
+ 0x24020006, 0x1462000f, 0x3c020111, 0x0a000269, 0x00821025, 0x0a000268,
+ 0x3c020101, 0x3c020011, 0x00821025, 0x24030001, 0xaf421000, 0xaf830030,
+ 0x0a000271, 0x00000000, 0x00821025, 0xaf421000, 0xaf800030, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x8f830030, 0x1060003f, 0x3c048000,
+ 0x8f421000, 0x00441024, 0x1040fffd, 0x00000000, 0x10600039, 0x00000000,
+ 0x8f421000, 0x3c030020, 0x00431024, 0x10400034, 0x00000000, 0x97421014,
+ 0x14400031, 0x00000000, 0x97421008, 0x8f84001c, 0x24420006, 0x00024082,
+ 0x00081880, 0x00643821, 0x8ce50000, 0x30430003, 0x30420001, 0x10400004,
+ 0x00000000, 0x0000000d, 0x0a0002b0, 0x00081080, 0x5460000f, 0x30a5ffff,
+ 0x3c06ffff, 0x00a62824, 0x0005182b, 0x00a61026, 0x0002102b, 0x00621824,
+ 0x10600004, 0x00000000, 0x0000000d, 0x00000000, 0x240001fc, 0x8ce20000,
+ 0x0a0002af, 0x00462825, 0x0005182b, 0x38a2ffff, 0x0002102b, 0x00621824,
+ 0x10600004, 0x00000000, 0x0000000d, 0x00000000, 0x24000206, 0x8ce20000,
+ 0x3445ffff, 0x00081080, 0x00441021, 0x3c030800, 0xac450000, 0x8c620840,
+ 0x24420001, 0xac620840, 0x8f820008, 0x10400003, 0x00000000, 0x0e000660,
+ 0x00000000, 0x8f840028, 0x02002821, 0x24820008, 0x30421fff, 0x24434000,
+ 0x0343d821, 0x30a30007, 0xaf840018, 0xaf820028, 0xaf420084, 0x10600002,
+ 0x24a20007, 0x3045fff8, 0x8f820044, 0x8f840004, 0x00451821, 0xaf82002c,
+ 0x0064102b, 0xaf830044, 0x14400002, 0x00641023, 0xaf820044, 0x8f840044,
+ 0x34028000, 0x8fbf0014, 0x8fb00010, 0x00821021, 0x03421821, 0x3c021000,
+ 0xaf83001c, 0xaf440080, 0xaf420178, 0x03e00008, 0x27bd0018, 0x8f820024,
+ 0x27bdffe8, 0xafbf0014, 0x10400004, 0xafb00010, 0x0000000d, 0x00000000,
+ 0x24000249, 0x8f85001c, 0x24020001, 0xaf820024, 0x8ca70008, 0xa3800023,
+ 0x8f620004, 0x3c100800, 0x26041b90, 0x00021402, 0xa3820010, 0x304600ff,
+ 0x24c60005, 0x0e00064a, 0x00063082, 0x8f640004, 0x8f430108, 0x3c021000,
+ 0x00621824, 0xa7840020, 0x10600008, 0x00000000, 0x97420104, 0x93830023,
+ 0x2442ffec, 0x34630002, 0xa3830023, 0x0a000304, 0x3045ffff, 0x97420104,
+ 0x2442fff0, 0x3045ffff, 0x8f620004, 0x3042ffff, 0x2c420013, 0x14400004,
+ 0x00000000, 0x93820023, 0x34420001, 0xa3820023, 0x93830023, 0x24020001,
+ 0x10620009, 0x28620002, 0x14400014, 0x24020002, 0x10620012, 0x24020003,
+ 0x1062000a, 0x00000000, 0x0a000325, 0x00000000, 0x8f82001c, 0x8c43000c,
+ 0x3c04ffff, 0x00641824, 0x00651825, 0x0a000325, 0xac43000c, 0x8f82001c,
+ 0x8c430010, 0x3c04ffff, 0x00641824, 0x00651825, 0xac430010, 0x8f620004,
+ 0x3042ffff, 0x24420002, 0x00021083, 0xa3820038, 0x304500ff, 0x8f82001c,
+ 0x3c04ffff, 0x00052880, 0x00a22821, 0x8ca70000, 0x97820020, 0x97430104,
+ 0x00e42024, 0x24420002, 0x00621823, 0x00833825, 0xaca70000, 0x93840038,
+ 0x26061b90, 0x00041080, 0x00461021, 0x90430000, 0x3063000f, 0x00832021,
+ 0xa3840022, 0x308200ff, 0x3c04fff6, 0x24420003, 0x00021080, 0x00461021,
+ 0x8c450000, 0x93830022, 0x8f82001c, 0x3484ffff, 0x00a43824, 0x00031880,
+ 0x00621821, 0xaf850000, 0xac67000c, 0x93820022, 0x93830022, 0x8f84001c,
+ 0x24420003, 0x00021080, 0x00461021, 0x24630004, 0x00031880, 0xac470000,
+ 0x93820022, 0x00661821, 0x94670002, 0x00021080, 0x00441021, 0xac670000,
+ 0x24030010, 0xac470010, 0xa7430140, 0x24030002, 0xa7400142, 0xa7400144,
+ 0xa7430146, 0x97420104, 0x8f840034, 0x24030001, 0x2442fffe, 0x30840006,
+ 0xa7420148, 0x24020002, 0xa743014a, 0x1082000d, 0x2c820003, 0x10400005,
+ 0x24020004, 0x10800011, 0x3c020009, 0x0a000383, 0x00000000, 0x10820007,
+ 0x24020006, 0x1482000d, 0x3c020119, 0x0a00037d, 0x24030001, 0x0a00037c,
+ 0x3c020109, 0x3c020019, 0x24030001, 0xaf421000, 0xaf830030, 0x0a000383,
+ 0x00000000, 0xaf421000, 0xaf800030, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x93820010, 0x24030008, 0x8f840030, 0x24420002, 0x30420007,
+ 0x00621823, 0x30630007, 0xaf83000c, 0x10800005, 0x3c038000, 0x8f421000,
+ 0x00431024, 0x1040fffd, 0x00000000, 0x8f820028, 0xaf820018, 0x24420010,
+ 0x30421fff, 0xaf820028, 0xaf420084, 0x97430104, 0x24424000, 0x0342d821,
+ 0x3063ffff, 0x30620007, 0x10400002, 0x24620007, 0x3043fff8, 0x8f820044,
+ 0x8f840004, 0x00431821, 0xaf82002c, 0x0064102b, 0xaf830044, 0x14400002,
+ 0x00641023, 0xaf820044, 0x8f840044, 0x34028000, 0x8fbf0014, 0x8fb00010,
+ 0x00821021, 0x03421821, 0x3c021000, 0xaf83001c, 0xaf440080, 0xaf420178,
+ 0x03e00008, 0x27bd0018, 0x8f820024, 0x27bdffe8, 0xafbf0014, 0x14400004,
+ 0xafb00010, 0x0000000d, 0x00000000, 0x240002db, 0x8f620004, 0x04410009,
+ 0x3c050800, 0x93820022, 0x8f830000, 0x24a41b90, 0xaf800024, 0x24420003,
+ 0x00021080, 0x00441021, 0xac430000, 0x93820038, 0x24a51b90, 0x93860010,
+ 0x3c040001, 0x27700008, 0x24420001, 0x00021080, 0x00451021, 0x8c430000,
+ 0x24c60005, 0x00063082, 0x00641821, 0x02002021, 0x0e00064a, 0xac430000,
+ 0x93840022, 0x3c057fff, 0x8f620004, 0x00042080, 0x00902021, 0x8c830004,
+ 0x34a5ffff, 0x00451024, 0x00621821, 0xac830004, 0x93850038, 0x3c07ffff,
+ 0x93840010, 0x00052880, 0x00b02821, 0x8ca30000, 0x97420104, 0x97860020,
+ 0x00671824, 0x00441021, 0x00461023, 0x3042ffff, 0x00621825, 0xaca30000,
+ 0x93830023, 0x24020001, 0x10620009, 0x28620002, 0x1440001a, 0x24020002,
+ 0x10620018, 0x24020003, 0x1062000d, 0x00000000, 0x0a000411, 0x00000000,
+ 0x93820010, 0x97430104, 0x8e04000c, 0x00621821, 0x2463fff2, 0x3063ffff,
+ 0x00872024, 0x00832025, 0x0a000411, 0xae04000c, 0x93820010, 0x97430104,
+ 0x8e040010, 0x00621821, 0x2463ffee, 0x3063ffff, 0x00872024, 0x00832025,
+ 0xae040010, 0x9783000e, 0x8f840034, 0x2402000a, 0xa7420140, 0xa7430142,
+ 0x93820010, 0xa7420144, 0xa7400146, 0x97430104, 0x30840006, 0x24020001,
+ 0xa7430148, 0xa742014a, 0x24020002, 0x1082000d, 0x2c820003, 0x10400005,
+ 0x24020004, 0x10800011, 0x3c020041, 0x0a000437, 0x00000000, 0x10820007,
+ 0x24020006, 0x1482000d, 0x3c020151, 0x0a000431, 0x24030001, 0x0a000430,
+ 0x3c020141, 0x3c020051, 0x24030001, 0xaf421000, 0xaf830030, 0x0a000437,
+ 0x00000000, 0xaf421000, 0xaf800030, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x8f820030, 0x93840010, 0x8f850028, 0x10400005, 0x3c038000,
+ 0x8f421000, 0x00431024, 0x1040fffd, 0x00000000, 0x2483000a, 0x30620007,
+ 0x10400002, 0x24620007, 0x304303f8, 0x00a31021, 0x30421fff, 0xaf850018,
+ 0xaf820028, 0xaf420084, 0x97430104, 0x24424000, 0x0342d821, 0x3063ffff,
+ 0x30620007, 0x10400002, 0x24620007, 0x3043fff8, 0x8f820044, 0x8f840004,
+ 0x00431821, 0xaf82002c, 0x0064102b, 0xaf830044, 0x14400002, 0x00641023,
+ 0xaf820044, 0x8f840044, 0x34028000, 0x8fbf0014, 0x8fb00010, 0x00821021,
+ 0x03421821, 0x3c021000, 0xaf83001c, 0xaf440080, 0xaf420178, 0x03e00008,
+ 0x27bd0018, 0x3c026000, 0x8c444448, 0x3c030800, 0xac64082c, 0x8f620000,
+ 0x97430104, 0x3c048000, 0x3046ffff, 0x3067ffff, 0x8f420178, 0x00441024,
+ 0x1440fffd, 0x2402000a, 0x30c30007, 0xa7420140, 0x24020008, 0x00431023,
+ 0x30420007, 0x24c3fffe, 0xa7420142, 0xa7430144, 0xa7400146, 0xa7470148,
+ 0x8f420108, 0x3c036000, 0x8f850034, 0x30420020, 0x0002102b, 0x00021023,
+ 0x30420009, 0x34420001, 0xa742014a, 0x8c644448, 0x3c020800, 0x30a50006,
+ 0xac440830, 0x24020002, 0x10a2000d, 0x2ca20003, 0x10400005, 0x24020004,
+ 0x10a00011, 0x3c020041, 0x0a0004a8, 0x00000000, 0x10a20007, 0x24020006,
+ 0x14a2000d, 0x3c020151, 0x0a0004a2, 0x24030001, 0x0a0004a1, 0x3c020141,
+ 0x3c020051, 0x24030001, 0xaf421000, 0xaf830030, 0x0a0004a8, 0x00000000,
+ 0xaf421000, 0xaf800030, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x8f820030, 0x24c30008, 0x10400006, 0x30e6ffff, 0x3c048000, 0x8f421000,
+ 0x00441024, 0x1040fffd, 0x00000000, 0x3c026000, 0x8c444448, 0x3065ffff,
+ 0x3c020800, 0x30a30007, 0x10600003, 0xac440834, 0x24a20007, 0x3045fff8,
+ 0x8f840028, 0x00851021, 0x30421fff, 0x24434000, 0x0343d821, 0x30c30007,
+ 0xaf840018, 0xaf820028, 0xaf420084, 0x10600002, 0x24c20007, 0x3046fff8,
+ 0x8f820044, 0x8f840004, 0x00461821, 0xaf82002c, 0x0064102b, 0xaf830044,
+ 0x14400002, 0x00641023, 0xaf820044, 0x8f840044, 0x34028000, 0x3c030800,
+ 0x8c650844, 0x00821021, 0x03421821, 0xaf83001c, 0xaf440080, 0x10a00006,
+ 0x2402000e, 0x93830043, 0x14620004, 0x3c021000, 0x2402043f, 0xa7420148,
+ 0x3c021000, 0x3c036000, 0xaf420178, 0x8c644448, 0x3c020800, 0x03e00008,
+ 0xac440838, 0x8f820034, 0x30424000, 0x10400005, 0x24020800, 0x0000000d,
+ 0x00000000, 0x24000405, 0x24020800, 0xaf420178, 0x97440104, 0x3c030008,
+ 0xaf430140, 0x8f820034, 0x30420001, 0x10400006, 0x3085ffff, 0x24020002,
+ 0x24a3fffe, 0xa7420146, 0x0a0004ff, 0xa7430148, 0xa7400146, 0x8f840028,
+ 0x2402000d, 0xa742014a, 0x24830008, 0x30631fff, 0x24624000, 0x0342d821,
+ 0x30a20007, 0xaf840018, 0xaf830028, 0xaf430084, 0x10400002, 0x24a20007,
+ 0x3045fff8, 0x8f820044, 0x8f840004, 0x00451821, 0xaf82002c, 0x0064102b,
+ 0xaf830044, 0x14400002, 0x00641023, 0xaf820044, 0x8f840044, 0x34028000,
+ 0x00821021, 0x03421821, 0x3c021000, 0xaf83001c, 0xaf440080, 0x03e00008,
+ 0xaf420178, 0x27bdffe8, 0x3c046008, 0xafbf0014, 0xafb00010, 0x8c825000,
+ 0x3c1a8000, 0x2403ff7f, 0x375b4000, 0x00431024, 0x3442380c, 0xac825000,
+ 0x8f430008, 0x3c100800, 0x37428000, 0x34630001, 0xaf430008, 0xaf82001c,
+ 0x3c02601c, 0xaf800028, 0xaf400080, 0xaf400084, 0x8c450008, 0x3c036000,
+ 0x8c620808, 0x3c040800, 0x3c030080, 0xac830820, 0x3042fff0, 0x38420010,
+ 0x2c420001, 0xaf850004, 0xaf820008, 0x0e00062f, 0x00000000, 0x8f420000,
+ 0x30420001, 0x1040fffb, 0x00000000, 0x8f440108, 0x30822000, 0xaf840034,
+ 0x10400004, 0x8e02083c, 0x24420001, 0x0a00059d, 0xae02083c, 0x30820200,
+ 0x10400027, 0x00000000, 0x97420104, 0x1040001c, 0x30824000, 0x14400005,
+ 0x00000000, 0x0e00022d, 0x00000000, 0x0a000592, 0x00000000, 0x8f620008,
+ 0x8f630000, 0x24020030, 0x00031e02, 0x306300f0, 0x10620007, 0x28620031,
+ 0x14400031, 0x24020040, 0x10620007, 0x00000000, 0x0a000592, 0x00000000,
+ 0x0e0002dd, 0x00000000, 0x0a000592, 0x00000000, 0x0e0003b8, 0x00000000,
+ 0x0a000592, 0x00000000, 0x30820040, 0x1440002d, 0x00000000, 0x0000000d,
+ 0x00000000, 0x240004a6, 0x0a00059d, 0x00000000, 0x8f430100, 0x24020d00,
+ 0x1462000f, 0x30820006, 0x97420104, 0x10400005, 0x30820040, 0x0e0004e9,
+ 0x00000000, 0x0a000592, 0x00000000, 0x1440001b, 0x00000000, 0x0000000d,
+ 0x00000000, 0x240004b8, 0x0a00059d, 0x00000000, 0x1040000e, 0x30821000,
+ 0x10400005, 0x00000000, 0x0e00065d, 0x00000000, 0x0a000592, 0x00000000,
+ 0x0e00046b, 0x00000000, 0x8f820040, 0x24420001, 0xaf820040, 0x0a00059d,
+ 0x00000000, 0x30820040, 0x14400004, 0x00000000, 0x0000000d, 0x00000000,
+ 0x240004cf, 0x8f420138, 0x3c034000, 0x00431025, 0xaf420138, 0x0a00053f,
+ 0x00000000, 0x3c046008, 0x8c835000, 0x3c1a8000, 0x2402ff7f, 0x375b4000,
+ 0x00621824, 0x3463380c, 0xac835000, 0x8f420008, 0x3c056000, 0x3c03601c,
+ 0x34420001, 0xaf420008, 0x37428000, 0xaf800028, 0xaf82001c, 0xaf400080,
+ 0xaf400084, 0x8c660008, 0x8ca20808, 0x3c040800, 0x3c030080, 0xac830820,
+ 0x3042fff0, 0x38420010, 0x2c420001, 0xaf860004, 0xaf820008, 0x03e00008,
+ 0x00000000, 0x3084ffff, 0x30820007, 0x10400002, 0x24820007, 0x3044fff8,
+ 0x8f820028, 0x00441821, 0x30631fff, 0x24644000, 0x0344d821, 0xaf820018,
+ 0xaf830028, 0x03e00008, 0xaf430084, 0x3084ffff, 0x30820007, 0x10400002,
+ 0x24820007, 0x3044fff8, 0x8f820044, 0x8f830004, 0x00442021, 0xaf82002c,
+ 0x0083102b, 0xaf840044, 0x14400002, 0x00831023, 0xaf820044, 0x8f820044,
+ 0x34038000, 0x00431821, 0x03432021, 0xaf84001c, 0x03e00008, 0xaf420080,
+ 0x8f830034, 0x24020002, 0x30630006, 0x1062000d, 0x2c620003, 0x50400005,
+ 0x24020004, 0x10600012, 0x3c020001, 0x0a000601, 0x00000000, 0x10620007,
+ 0x24020006, 0x1462000f, 0x3c020111, 0x0a0005f9, 0x00821025, 0x0a0005f8,
+ 0x3c020101, 0x3c020011, 0x00821025, 0x24030001, 0xaf421000, 0xaf830030,
+ 0x0a000601, 0x00000000, 0x00821025, 0xaf421000, 0xaf800030, 0x00000000,
+ 0x00000000, 0x00000000, 0x03e00008, 0x00000000, 0x8f820030, 0x10400005,
+ 0x3c038000, 0x8f421000, 0x00431024, 0x1040fffd, 0x00000000, 0x03e00008,
+ 0x00000000, 0x8f820034, 0x27bdffe8, 0x30424000, 0x14400005, 0xafbf0010,
+ 0x0e00022d, 0x00000000, 0x0a00062d, 0x8fbf0010, 0x8f620008, 0x8f630000,
+ 0x24020030, 0x00031e02, 0x306300f0, 0x10620008, 0x28620031, 0x1440000d,
+ 0x8fbf0010, 0x24020040, 0x10620007, 0x00000000, 0x0a00062d, 0x00000000,
+ 0x0e0002dd, 0x00000000, 0x0a00062d, 0x8fbf0010, 0x0e0003b8, 0x00000000,
+ 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x8f84003c, 0x1080000f, 0x3c026000,
+ 0x8c430c3c, 0x30630fff, 0xaf830014, 0x14600011, 0x3082000f, 0x10400005,
+ 0x308200f0, 0x10400003, 0x30820f00, 0x14400006, 0x00000000, 0x0000000d,
+ 0x00000000, 0x2400050e, 0x03e00008, 0x00000000, 0x0000000d, 0x00000000,
+ 0x24000513, 0x03e00008, 0x00000000, 0xaf83003c, 0x03e00008, 0x00000000,
+ 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000,
+ 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a000659, 0x00a01021,
+ 0xac860000, 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, 0x03e00008,
+ 0x00000000, 0x0000000d, 0x03e00008, 0x00000000, 0x3c040800, 0x8c82084c,
+ 0x54400007, 0xac80084c, 0x8f820034, 0x24030400, 0x30420c00, 0x1443005b,
+ 0x00000000, 0xac80084c, 0x0000000d, 0x00000000, 0x2400003c, 0x3c026000,
+ 0x8c444448, 0x3c030800, 0xac640850, 0x24000043, 0x97420104, 0x3045ffff,
+ 0x000530c2, 0x24a2007f, 0x000239c2, 0x2400004e, 0x3c046020, 0x24030020,
+ 0xac830000, 0x8c820000, 0x30420020, 0x10400005, 0x3c036020, 0x8c620000,
+ 0x30420020, 0x1440fffd, 0x00000000, 0x3c026020, 0x8c430010, 0x24040001,
+ 0x0087102b, 0x30ea007f, 0x24abfffe, 0x10400010, 0x00034240, 0x3c056020,
+ 0x24090020, 0xaca90000, 0x8ca20000, 0x30420020, 0x10400006, 0x24840001,
+ 0x3c036020, 0x8c620000, 0x30420020, 0x1440fffd, 0x00000000, 0x0087102b,
+ 0x1440fff4, 0x00000000, 0x8f85001c, 0x3c026020, 0x8c430010, 0x3c046020,
+ 0x34848000, 0x006a1825, 0x01034025, 0x2400006b, 0x10c0000b, 0x00000000,
+ 0x8ca30000, 0x24a50004, 0x8ca20000, 0x24a50004, 0x24c6ffff, 0xac820000,
+ 0x24840004, 0xac830000, 0x14c0fff7, 0x24840004, 0x24000077, 0x3c020007,
+ 0x34427700, 0x3c036000, 0xac6223c8, 0xac6b23cc, 0xac6823e4, 0x24000086,
+ 0x3c046000, 0x3c038000, 0x8c8223f8, 0x00431024, 0x1440fffd, 0x3c021000,
+ 0x3c056000, 0x24030019, 0xaca223f8, 0xa743014a, 0x8ca44448, 0x3c020800,
+ 0xac440854, 0x03e00008, 0x00000000, 0x00000000 };
+
+static u32 bnx2_TPAT_b06FwData[(0x0/4) + 1] = { 0x00000000 };
+static u32 bnx2_TPAT_b06FwRodata[(0x0/4) + 1] = { 0x00000000 };
+static u32 bnx2_TPAT_b06FwBss[(0x80/4) + 1] = { 0x00000000 };
+static u32 bnx2_TPAT_b06FwSbss[(0x48/4) + 1] = { 0x00000000 };
+
+static int bnx2_TXP_b06FwReleaseMajor = 0x0;
+static int bnx2_TXP_b06FwReleaseMinor = 0x0;
+static int bnx2_TXP_b06FwReleaseFix = 0x0;
+static u32 bnx2_TXP_b06FwStartAddr = 0x08002090;
+static u32 bnx2_TXP_b06FwTextAddr = 0x08000000;
+static int bnx2_TXP_b06FwTextLen = 0x3ffc;
+static u32 bnx2_TXP_b06FwDataAddr = 0x08004020;
+static int bnx2_TXP_b06FwDataLen = 0x0;
+static u32 bnx2_TXP_b06FwRodataAddr = 0x00000000;
+static int bnx2_TXP_b06FwRodataLen = 0x0;
+static u32 bnx2_TXP_b06FwBssAddr = 0x08004060;
+static int bnx2_TXP_b06FwBssLen = 0x194;
+static u32 bnx2_TXP_b06FwSbssAddr = 0x08004020;
+static int bnx2_TXP_b06FwSbssLen = 0x34;
+static u32 bnx2_TXP_b06FwText[(0x3ffc/4) + 1] = {
+ 0x0a000824, 0x00000000, 0x00000000, 0x0000000d, 0x74787020, 0x302e362e,
+ 0x39000000, 0x00060900, 0x0000000a, 0x000003e8, 0x0000ea60, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x10000003, 0x00000000, 0x0000000d,
+ 0x0000000d, 0x3c020800, 0x24424020, 0x3c030800, 0x246341f4, 0xac400000,
+ 0x0043202b, 0x1480fffd, 0x24420004, 0x3c1d0800, 0x37bd7ffc, 0x03a0f021,
+ 0x3c100800, 0x26102090, 0x3c1c0800, 0x279c4020, 0x0e000a0e, 0x00000000,
+ 0x0000000d, 0x8f840014, 0x27bdffe8, 0xafb00010, 0x8f460104, 0x8f830008,
+ 0x8c8500ac, 0xaf430080, 0x948200a8, 0xa7420e10, 0x948300aa, 0xa7430e12,
+ 0x8c8200ac, 0xaf420e18, 0x97430e10, 0xa7430e14, 0x97420e12, 0xa7420e16,
+ 0x8f430e18, 0x00005021, 0x00c53023, 0x10c001a3, 0xaf430e1c, 0x240f0800,
+ 0x3c0e1000, 0x2419fff8, 0x24100010, 0x3c188100, 0x93620008, 0x10400009,
+ 0x00000000, 0x97620010, 0x00c2102b, 0x14400005, 0x00000000, 0x97620010,
+ 0x3042ffff, 0x0a000862, 0xaf420e00, 0xaf460e00, 0x8f420000, 0x30420008,
+ 0x1040fffd, 0x00000000, 0x97420e08, 0x8f450e04, 0x3044ffff, 0x30820001,
+ 0x14400005, 0x00000000, 0x14a00005, 0x3083a040, 0x0a0009e6, 0x00000000,
+ 0x0000000d, 0x3083a040, 0x24020040, 0x14620049, 0x3082a000, 0x8f87000c,
+ 0x30880036, 0x30890008, 0xaf4f0178, 0x00e01821, 0x9742008a, 0x00431023,
+ 0x2442ffff, 0x30421fff, 0x2c420008, 0x1440fffa, 0x00000000, 0x8f830018,
+ 0x00a05021, 0x00c53023, 0x24e24000, 0x03422821, 0x306b00ff, 0x24630001,
+ 0xaf830018, 0x93840012, 0x000b1400, 0x3c030100, 0x00431025, 0xaca20000,
+ 0x8f820018, 0x30840007, 0x00042240, 0x34870001, 0x00e83825, 0x1120000f,
+ 0xaca20004, 0x97430e0a, 0x8f84000c, 0x00ee3825, 0x2402000e, 0x00781825,
+ 0xaf430160, 0x25430006, 0x24840008, 0x30841fff, 0xa742015a, 0xa7430158,
+ 0xaf84000c, 0x0a0008a9, 0x00000000, 0x8f83000c, 0x25420002, 0xa7420158,
+ 0x24630008, 0x30631fff, 0xaf83000c, 0x54c0000c, 0x8f420e14, 0x97420e10,
+ 0x97430e12, 0x8f840014, 0x00021400, 0x00621825, 0xac8300a8, 0x8f850014,
+ 0x8f420e18, 0x34e70040, 0xaca200ac, 0x8f420e14, 0x8f430e1c, 0xaf420144,
+ 0xaf430148, 0xa34b0152, 0xaf470154, 0x0a0009f1, 0xaf4e0178, 0x10400128,
+ 0x00000000, 0x97620010, 0x00a2102b, 0x10400003, 0x30820040, 0x10400122,
+ 0x00000000, 0xafa60008, 0xa7840010, 0xaf850004, 0x93620008, 0x1440005e,
+ 0x27ac0008, 0xaf60000c, 0x97820010, 0x30424000, 0x10400002, 0x2403000e,
+ 0x24030016, 0xa363000a, 0x24034007, 0xaf630014, 0x93820012, 0x8f630014,
+ 0x30420007, 0x00021240, 0x00621825, 0xaf630014, 0x97820010, 0x8f630014,
+ 0x30420010, 0x00621825, 0xaf630014, 0x97820010, 0x30420008, 0x5040000e,
+ 0x00002821, 0x8f620014, 0x004e1025, 0xaf620014, 0x97430e0a, 0x2402000e,
+ 0x00781825, 0xaf630004, 0xa3620002, 0x9363000a, 0x3405fffc, 0x24630004,
+ 0x0a0008f2, 0xa363000a, 0xaf600004, 0xa3600002, 0x97820010, 0x9363000a,
+ 0x30421f00, 0x00021182, 0x24420028, 0x00621821, 0xa3630009, 0x97420e0c,
+ 0xa7620010, 0x93630009, 0x24020008, 0x24630002, 0x30630007, 0x00431023,
+ 0x30420007, 0xa362000b, 0x93640009, 0x97620010, 0x8f890004, 0x97830010,
+ 0x00441021, 0x00a21021, 0x30630040, 0x10600006, 0x3045ffff, 0x15250005,
+ 0x0125102b, 0x3c068000, 0x0a000925, 0x00005821, 0x0125102b, 0x144000c8,
+ 0x00005021, 0x97420e14, 0xa7420e10, 0x97430e16, 0xa7430e12, 0x8f420e1c,
+ 0xaf420e18, 0xaf450e00, 0x8f420000, 0x30420008, 0x1040fffd, 0x00000000,
+ 0x97420e08, 0x00a04821, 0xa7820010, 0x8f430e04, 0x00003021, 0x240b0001,
+ 0xaf830004, 0x97620010, 0x0a000936, 0x304dffff, 0x8f890004, 0x97820010,
+ 0x30420040, 0x10400004, 0x01206821, 0x3c068000, 0x0a000936, 0x00005821,
+ 0x97630010, 0x8f820004, 0x144300a7, 0x00005021, 0x00003021, 0x240b0001,
+ 0x8d820000, 0x00491023, 0x1440000d, 0xad820000, 0x8f620014, 0x34420040,
+ 0xaf620014, 0x97430e10, 0x97420e12, 0x8f840014, 0x00031c00, 0x00431025,
+ 0xac8200a8, 0x8f830014, 0x8f420e18, 0xac6200ac, 0x93620008, 0x1440003f,
+ 0x00000000, 0x25260002, 0x8f84000c, 0x9743008a, 0x3063ffff, 0xafa30000,
+ 0x8fa20000, 0x00441023, 0x2442ffff, 0x30421fff, 0x2c420010, 0x1440fff7,
+ 0x00000000, 0x8f82000c, 0x8f830018, 0x00021082, 0x00021080, 0x24424000,
+ 0x03422821, 0x00605021, 0x24630001, 0x314200ff, 0x00021400, 0xaf830018,
+ 0x3c033200, 0x00431025, 0xaca20000, 0x93630009, 0x9362000a, 0x00031c00,
+ 0x00431025, 0xaca20004, 0x8f830018, 0xaca30008, 0x97820010, 0x30420008,
+ 0x10400002, 0x00c04021, 0x25280006, 0x97430e14, 0x93640002, 0x8f450e1c,
+ 0x8f660004, 0x8f670014, 0xaf4f0178, 0x3063ffff, 0xa7430144, 0x97420e16,
+ 0xa7420146, 0xaf450148, 0xa34a0152, 0x8f82000c, 0x308400ff, 0xa744015a,
+ 0xaf460160, 0xa7480158, 0xaf470154, 0xaf4e0178, 0x00501021, 0x30421fff,
+ 0xaf82000c, 0x0a0009c5, 0x8d820000, 0x93620009, 0x9363000b, 0x8f85000c,
+ 0x2463000a, 0x00435021, 0x25440007, 0x00992024, 0x9743008a, 0x3063ffff,
+ 0xafa30000, 0x8fa20000, 0x00451023, 0x2442ffff, 0x30421fff, 0x0044102b,
+ 0x1440fff7, 0x00000000, 0x8f82000c, 0x8f840018, 0x00021082, 0x00021080,
+ 0x24424000, 0x03422821, 0x00804021, 0x24840001, 0xaf840018, 0x93630009,
+ 0x310200ff, 0x00022400, 0x3c024100, 0x24630002, 0x00621825, 0x00832025,
+ 0xaca40000, 0x8f62000c, 0x00461025, 0xaca20004, 0x97430e14, 0x93640002,
+ 0x8f450e1c, 0x8f660004, 0x8f670014, 0xaf4f0178, 0x3063ffff, 0xa7430144,
+ 0x97420e16, 0x308400ff, 0xa7420146, 0xaf450148, 0xa3480152, 0x8f83000c,
+ 0x25420007, 0x00591024, 0xa744015a, 0xaf460160, 0xa7490158, 0xaf470154,
+ 0xaf4e0178, 0x00621821, 0x30631fff, 0xaf83000c, 0x8d820000, 0x14400005,
+ 0x00000000, 0x8f620014, 0x2403ffbf, 0x00431024, 0xaf620014, 0x8f62000c,
+ 0x004d1021, 0xaf62000c, 0x93630008, 0x14600008, 0x00000000, 0x11600006,
+ 0x00000000, 0x8f630014, 0x3c02efff, 0x3442fffe, 0x00621824, 0xaf630014,
+ 0xa36b0008, 0x01205021, 0x15400016, 0x8fa60008, 0x97420e14, 0x97430e16,
+ 0x8f850014, 0x00021400, 0x00621825, 0xaca300a8, 0x8f840014, 0x8f420e1c,
+ 0x0a0009f3, 0xac8200ac, 0x97420e14, 0x97430e16, 0x8f840014, 0x00021400,
+ 0x00621825, 0xac8300a8, 0x8f850014, 0x8f420e1c, 0x00005021, 0x0a0009f3,
+ 0xaca200ac, 0x14c0fe64, 0x00000000, 0x55400018, 0x8fb00010, 0x3c038000,
+ 0x8f420178, 0x00431024, 0x1440fffd, 0x00000000, 0x97430e14, 0x8f440e1c,
+ 0x24020800, 0xaf420178, 0x3063ffff, 0xa7430144, 0x97420e16, 0x3c031000,
+ 0xa7420146, 0x24020240, 0xaf440148, 0xa3400152, 0xa740015a, 0xaf400160,
+ 0xa7400158, 0xaf420154, 0xaf430178, 0x8fb00010, 0x03e00008, 0x27bd0018,
+ 0x27bdffd8, 0x3c1a8000, 0x3c0420ff, 0x3484fffd, 0x3c020008, 0x03421821,
+ 0xafbf0020, 0xafb3001c, 0xafb20018, 0xafb10014, 0xafb00010, 0xaf830014,
+ 0xaf440e00, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x3c0200ff, 0x3442fffd, 0x3c046004, 0xaf420e00, 0x8c835000, 0x24130d00,
+ 0x3c120800, 0x3c114000, 0x2402ff7f, 0x00621824, 0x3463380c, 0x24020009,
+ 0xac835000, 0xaf420008, 0xaf800018, 0xaf80000c, 0x0e000fa1, 0x00000000,
+ 0x0e000a96, 0x00000000, 0x3c020800, 0x24504080, 0x8f420000, 0x30420001,
+ 0x1040fffd, 0x00000000, 0x8f440100, 0xaf840008, 0xaf440020, 0x93430108,
+ 0xa3830012, 0x93820012, 0x30420001, 0x10400008, 0x00000000, 0x93820012,
+ 0x30420006, 0x00021100, 0x0e00083b, 0x0050d821, 0x0a000a52, 0x00000000,
+ 0x14930005, 0x00000000, 0x0e00083b, 0x265b4100, 0x0a000a52, 0x00000000,
+ 0x0e000ba3, 0x00000000, 0xaf510138, 0x0a000a36, 0x00000000, 0x27bdfff8,
+ 0x3084ffff, 0x24820007, 0x3044fff8, 0x8f85000c, 0x9743008a, 0x3063ffff,
+ 0xafa30000, 0x8fa20000, 0x00451023, 0x2442ffff, 0x30421fff, 0x0044102b,
+ 0x1440fff7, 0x00000000, 0x8f82000c, 0x00021082, 0x00021080, 0x24424000,
+ 0x03421021, 0x03e00008, 0x27bd0008, 0x3084ffff, 0x8f82000c, 0x24840007,
+ 0x3084fff8, 0x00441021, 0x30421fff, 0xaf82000c, 0x03e00008, 0x00000000,
+ 0x27bdffe8, 0x3c1a8000, 0x3c0420ff, 0x3484fffd, 0x3c020008, 0x03421821,
+ 0xafbf0010, 0xaf830014, 0xaf440e00, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x3c0200ff, 0x3442fffd, 0x3c046004, 0xaf420e00,
+ 0x8c825000, 0x2403ff7f, 0x00431024, 0x3442380c, 0x24030009, 0xac825000,
+ 0xaf430008, 0xaf800018, 0xaf80000c, 0x0e000fa1, 0x00000000, 0x0e000a96,
+ 0x00000000, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0x3c02000a,
+ 0x03421821, 0x3c040800, 0x24844120, 0x24050018, 0xafbf0010, 0xaf830024,
+ 0x0e000fad, 0x00003021, 0x3c050800, 0x3c020800, 0x24423d60, 0xaca24180,
+ 0x24a54180, 0x3c020800, 0x24423e18, 0x3c030800, 0x24633e2c, 0x3c040800,
+ 0xaca20004, 0x3c020800, 0x24423d68, 0xaca30008, 0xac824190, 0x24844190,
+ 0x3c020800, 0x24423da4, 0x3c070800, 0x24e73de4, 0x3c060800, 0x24c63e40,
+ 0x3c050800, 0x24a52b28, 0x3c030800, 0xac820004, 0x3c020800, 0x24423e48,
+ 0xac870008, 0xac86000c, 0xac850010, 0xac6241b0, 0x246341b0, 0x8fbf0010,
+ 0x3c020800, 0x24423e60, 0xac620004, 0xac670008, 0xac66000c, 0xac650010,
+ 0x03e00008, 0x27bd0018, 0x27bdffc8, 0x3c020800, 0x24424120, 0xafbf0030,
+ 0xafb3002c, 0xafb20028, 0xafb10024, 0xafb00020, 0x90470021, 0x8c510008,
+ 0x8c45001c, 0x8f900020, 0x3c060800, 0x3c038000, 0x8f420178, 0x00431024,
+ 0x1440fffd, 0x8cc2414c, 0x24c3414c, 0x2473ffd4, 0xaf420144, 0x8e620030,
+ 0x30b22000, 0xaf420148, 0x3c021000, 0xaf50014c, 0xa3470152, 0xa7510158,
+ 0xaf450154, 0xaf420178, 0x12400004, 0x3c030800, 0x8c620030, 0x24420001,
+ 0xac620030, 0x93420109, 0x9344010a, 0x00111c00, 0xafa30018, 0x00071a00,
+ 0xafa50014, 0x8cc5414c, 0x00021600, 0x00042400, 0x00441025, 0x00431025,
+ 0xafa20010, 0x8f440100, 0x8e660030, 0x0e000fe1, 0x02003821, 0x1640000e,
+ 0x8fbf0030, 0x8f820000, 0x8e630030, 0x8c44017c, 0x02031823, 0x00711823,
+ 0x00641823, 0x2c630002, 0x14600006, 0x8fb3002c, 0x0000000d, 0x00000000,
+ 0x240000ca, 0x8fbf0030, 0x8fb3002c, 0x8fb20028, 0x8fb10024, 0x8fb00020,
+ 0x03e00008, 0x27bd0038, 0x974309da, 0x00804021, 0xad030000, 0x8f4209dc,
+ 0xad020004, 0x8f4309e0, 0xad030008, 0x934409d9, 0x24020001, 0x30840003,
+ 0x1082001f, 0x30a900ff, 0x28820002, 0x10400005, 0x24020002, 0x10800009,
+ 0x3c0a0800, 0x0a000b64, 0x93420934, 0x1082000b, 0x24020003, 0x10820026,
+ 0x3c0a0800, 0x0a000b64, 0x93420934, 0x974209e4, 0x00021400, 0x34420800,
+ 0xad02000c, 0x0a000b63, 0x25080010, 0x974209e4, 0x00021400, 0x34428100,
+ 0xad02000c, 0x974309e8, 0x3c0a0800, 0x00031c00, 0x34630800, 0xad030010,
+ 0x0a000b63, 0x25080014, 0x974409e4, 0x3c050800, 0x24a24120, 0x94430018,
+ 0x94460010, 0x9447000c, 0x00a05021, 0x24020800, 0xad000010, 0xad020014,
+ 0x00042400, 0x00661821, 0x00671823, 0x2463fff2, 0x00832025, 0xad04000c,
+ 0x0a000b63, 0x25080018, 0x974209e4, 0x3c050800, 0x00021400, 0x34428100,
+ 0xad02000c, 0x974409e8, 0x24a24120, 0x94430018, 0x94460010, 0x9447000c,
+ 0x00a05021, 0x24020800, 0xad000014, 0xad020018, 0x00042400, 0x00661821,
+ 0x00671823, 0x2463ffee, 0x00832025, 0xad040010, 0x2508001c, 0x93420934,
+ 0x93450921, 0x3c074000, 0x25444120, 0x94830014, 0x94860010, 0x00021082,
+ 0x00021600, 0x00052c00, 0x00a72825, 0x00451025, 0x00661821, 0x00431025,
+ 0xad020000, 0x97830028, 0x974209ea, 0x00621821, 0x00031c00, 0xad030004,
+ 0x97820028, 0x24420001, 0x30427fff, 0xa7820028, 0x93430920, 0x3c020006,
+ 0x00031e00, 0x00621825, 0xad030008, 0x8f42092c, 0xad02000c, 0x8f430930,
+ 0xad030010, 0x8f440938, 0x25080014, 0xad040000, 0x8f820020, 0x11200004,
+ 0xad020004, 0x8f420940, 0x0a000b8d, 0x2442ffff, 0x8f420940, 0xad020008,
+ 0x8f440948, 0x8f420940, 0x93430936, 0x00822823, 0x00652806, 0x3402ffff,
+ 0x0045102b, 0x54400001, 0x3405ffff, 0x93420937, 0x25444120, 0x90830020,
+ 0xad000010, 0x00021700, 0x34630010, 0x00031c00, 0x00431025, 0x00451025,
+ 0xad02000c, 0x03e00008, 0x25020014, 0x27bdffb0, 0x3c020008, 0x03421821,
+ 0xafbf004c, 0xafbe0048, 0xafb70044, 0xafb60040, 0xafb5003c, 0xafb40038,
+ 0xafb30034, 0xafb20030, 0xafb1002c, 0xafb00028, 0xaf830000, 0x24020040,
+ 0xaf420814, 0xaf400810, 0x8f420944, 0x8f430950, 0x8f440954, 0x8f45095c,
+ 0xaf820030, 0xaf830020, 0xaf84001c, 0xaf85002c, 0x93430900, 0x24020020,
+ 0x10620005, 0x24020030, 0x10620022, 0x3c030800, 0x0a000bf1, 0x8c62002c,
+ 0x24020088, 0xaf420818, 0x3c020800, 0x24424180, 0xafa20020, 0x93430109,
+ 0x3c020800, 0x10600009, 0x24574190, 0x3c026000, 0x24030100, 0xac43081c,
+ 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x2400031d, 0x9342010a,
+ 0x30420080, 0x1440001c, 0x00000000, 0x3c026000, 0x24030100, 0xac43081c,
+ 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x24000324, 0x0a000bf4,
+ 0x00000000, 0x93430109, 0x3063007f, 0x00031140, 0x000318c0, 0x00431021,
+ 0x24430088, 0xaf430818, 0x0000000d, 0x3c020800, 0x244241d0, 0x3c030800,
+ 0x247741e0, 0x0a000bf4, 0xafa20020, 0x24420001, 0x0a000f4c, 0xac62002c,
+ 0x8f840000, 0x8f850020, 0x24020800, 0xaf420178, 0x8f4209a4, 0x8c83017c,
+ 0x00a21023, 0x00431023, 0x2c420002, 0x14400004, 0x00000000, 0x0000000d,
+ 0x00000000, 0x24000349, 0x8f420104, 0x8f430988, 0x00431023, 0x58400005,
+ 0x8f4209a0, 0x0000000d, 0x00000000, 0x2400034d, 0x8f4209a0, 0x3c100800,
+ 0xae02414c, 0x8f4309a4, 0x2604414c, 0x2491ffd4, 0xae230030, 0x8f420104,
+ 0xae250024, 0x00431023, 0xac82ffd4, 0x8fa30020, 0x8c620000, 0x0040f809,
+ 0x0200b021, 0x00409021, 0x32440010, 0x32420002, 0x10400007, 0xafa40024,
+ 0x8e22001c, 0x32500040, 0x2403ffbf, 0x00431024, 0x0a000f13, 0xae22001c,
+ 0x32420020, 0x10400002, 0x3c020800, 0x245741b0, 0x32420001, 0x14400007,
+ 0x00000000, 0x8f820008, 0xaf420080, 0x8ec3414c, 0xaf430e10, 0x8e220030,
+ 0xaf420e18, 0x9343010b, 0x93420905, 0x30420008, 0x1040003c, 0x307400ff,
+ 0x8f820000, 0x8c430074, 0x0460000a, 0x00000000, 0x3c026000, 0x24030100,
+ 0xac43081c, 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x24000384,
+ 0x8f820000, 0x9044007b, 0x9343010a, 0x14830027, 0x32500040, 0x24072000,
+ 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, 0x1440fffd, 0x8ec2414c,
+ 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, 0x3c030100, 0xaf420148,
+ 0x24020047, 0xaf43014c, 0x00001821, 0xa3420152, 0x3c021000, 0xa7430158,
+ 0xaf470154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, 0x24630001,
+ 0xad230030, 0x93420109, 0x9343010a, 0xafa70014, 0xafa00018, 0x00021600,
+ 0x00031c00, 0x00431025, 0x34424700, 0xafa20010, 0x8f440100, 0x0e000fe1,
+ 0x3c070100, 0x3c030800, 0x24624120, 0x0a000d01, 0x8c43001c, 0x32820002,
+ 0x10400047, 0x3c039000, 0x34630001, 0x8f820008, 0x32500040, 0x3c048000,
+ 0x00431025, 0xaf420020, 0x8f420020, 0x00441024, 0x1440fffd, 0x00000000,
+ 0x8f830000, 0x90620005, 0x3c058000, 0x34420008, 0xa0620005, 0x8f860000,
+ 0x34a50001, 0x8f840008, 0x8cc20074, 0x3c038000, 0x00852025, 0x00431025,
+ 0xacc20074, 0xaf440020, 0x90c3007b, 0x9342010a, 0x14620028, 0x3c040800,
+ 0x24072000, 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, 0x1440fffd,
+ 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, 0x3c030100,
+ 0xaf420148, 0x24020046, 0xaf43014c, 0x00001821, 0xa3420152, 0x3c021000,
+ 0xa7430158, 0xaf470154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030,
+ 0x24630001, 0xad230030, 0x93420109, 0x9343010a, 0xafa70014, 0xafa00018,
+ 0x00021600, 0x00031c00, 0x00431025, 0x34424600, 0xafa20010, 0x8f440100,
+ 0x0e000fe1, 0x3c070100, 0x3c040800, 0x24824120, 0x0a000d01, 0x8c43001c,
+ 0x93420108, 0x30420010, 0x50400050, 0x9343093f, 0x8f860000, 0x90c3007f,
+ 0x90c2007e, 0x90c40080, 0x306800ff, 0x00021600, 0x00081c00, 0x00431025,
+ 0x00042200, 0x90c3007a, 0x90c5000a, 0x00441025, 0x11050028, 0x00623825,
+ 0xa0c8000a, 0x24086000, 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024,
+ 0x1440fffd, 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030,
+ 0x00001821, 0xaf420148, 0x24020052, 0xaf47014c, 0xa3420152, 0x3c021000,
+ 0xa7430158, 0xaf480154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030,
+ 0x24630001, 0xad230030, 0x93420109, 0x9343010a, 0xafa80014, 0xafa00018,
+ 0x00021600, 0x00031c00, 0x00431025, 0x34425200, 0xafa20010, 0x0e000fe1,
+ 0x8f440100, 0x0a000cfb, 0x00000000, 0x3c026000, 0x24030100, 0xac43081c,
+ 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x240003cd, 0x16800009,
+ 0x3c040800, 0x3c030800, 0x24624120, 0x8c43001c, 0x32500040, 0x2404ffbf,
+ 0x00641824, 0x0a000f13, 0xac43001c, 0x8c824120, 0x10400005, 0x3c030800,
+ 0x8c620034, 0xac804120, 0x24420001, 0xac620034, 0x9343093f, 0x24020012,
+ 0x1462000f, 0x329e0038, 0x17c0000c, 0x3c030800, 0x8f830000, 0x8c62004c,
+ 0xac62005c, 0x3c020800, 0x24444120, 0x8c82001c, 0x32500040, 0x2403ffbf,
+ 0x00431024, 0x0a000f13, 0xac82001c, 0xac604120, 0x97420908, 0x000211c0,
+ 0xaf420024, 0x97420908, 0x3c030080, 0x34630003, 0x000211c0, 0xaf42080c,
+ 0xaf43081c, 0x974209ec, 0x8f4309a4, 0xa7820028, 0x3c020800, 0x24444120,
+ 0xac830028, 0x93420937, 0x93430934, 0x00021080, 0x00621821, 0xa4830014,
+ 0x934209d8, 0x00621821, 0xa4830016, 0x934209d8, 0x93430934, 0x00809821,
+ 0x00431021, 0x24420010, 0xa4820012, 0x0000a821, 0x24020006, 0x13c00003,
+ 0xae62001c, 0x0a000d82, 0x24120008, 0x8f420958, 0x8f830020, 0x8f84002c,
+ 0x00431023, 0x00832023, 0x04800003, 0xae620004, 0x04410003, 0x0082102b,
+ 0x0a000d4e, 0xae600004, 0x54400001, 0xae640004, 0x8ee20000, 0x0040f809,
+ 0x00000000, 0x00409021, 0x32420001, 0x5440001e, 0x8ee20004, 0x8e630008,
+ 0x1060002b, 0x3c02c000, 0x00621025, 0xaf420e00, 0x8f420000, 0x30420008,
+ 0x1040fffd, 0x00000000, 0x97420e08, 0xa7820010, 0x8f430e04, 0x8e620008,
+ 0xaf830004, 0x8f840004, 0x0044102b, 0x1040000b, 0x24150001, 0x24020100,
+ 0x3c016000, 0xac22081c, 0x3c020001, 0x3c016000, 0xac22081c, 0x0000000d,
+ 0x00000000, 0x24000449, 0x24150001, 0x8ee20004, 0x0040f809, 0x00000000,
+ 0x02429025, 0x32420002, 0x5040001d, 0x8f470940, 0x12a00006, 0x8ec2414c,
+ 0x8f830000, 0xac6200a8, 0x8f840000, 0x8e620030, 0xac8200ac, 0x32420004,
+ 0x50400013, 0x8f470940, 0x3c020800, 0x3283007d, 0x106000fe, 0x245741b0,
+ 0x32820001, 0x50400006, 0x36520002, 0x8f830030, 0x8f420940, 0x106200f7,
+ 0x00000000, 0x36520002, 0x24020008, 0xa660000c, 0xa662000e, 0xae600008,
+ 0xa2600020, 0x8f470940, 0x3c030800, 0x24684120, 0x8d020028, 0x8d050008,
+ 0x9504000c, 0x9506000a, 0x95030022, 0x00451021, 0x00862021, 0x00641821,
+ 0xaf870030, 0xad020028, 0x32820030, 0x10400006, 0xa5030010, 0x91020020,
+ 0x32910040, 0x34420004, 0x0a000dd4, 0xa1020020, 0x93420923, 0x30420040,
+ 0x10400029, 0x32910040, 0x8f830000, 0x8f840020, 0x8c620084, 0x00441023,
+ 0x0442000a, 0x3c039000, 0x95020010, 0x8c630084, 0x00821021, 0x00621823,
+ 0x1c600004, 0x3c039000, 0x91020020, 0x34420001, 0xa1020020, 0x34630001,
+ 0x8f820008, 0x32910040, 0x3c048000, 0x00431025, 0xaf420020, 0x8f420020,
+ 0x00441024, 0x1440fffd, 0x00000000, 0x8f840000, 0x9083003f, 0x2402000a,
+ 0x10620005, 0x2402000c, 0x9083003f, 0x24020008, 0x14620002, 0x24020014,
+ 0xa082003f, 0x8f830008, 0x3c028000, 0x34420001, 0x00621825, 0xaf430020,
+ 0x3c040800, 0x24904120, 0x9602000c, 0x96030016, 0x9604000e, 0x00431021,
+ 0x00442021, 0x24840002, 0x3084ffff, 0x0e000a55, 0xa6020018, 0x8f850018,
+ 0x00a01821, 0xa2030021, 0x8ee60008, 0x00402021, 0x24a50001, 0xaf850018,
+ 0x00c0f809, 0x00000000, 0x00402021, 0x0e000b12, 0x02202821, 0x8ee3000c,
+ 0x0060f809, 0x00402021, 0x96040018, 0x9602000e, 0x00822021, 0x24840002,
+ 0x0e000a6b, 0x3084ffff, 0x3c030800, 0x8c624120, 0x8e030008, 0x3c040800,
+ 0x00431023, 0x14400012, 0xac824120, 0x54600006, 0x8e02001c, 0x3243004a,
+ 0x24020002, 0x14620005, 0x00000000, 0x8e02001c, 0x34420040, 0x0a000e0b,
+ 0xae02001c, 0x52a00006, 0x36520002, 0x8e02002c, 0xaf420e10, 0x8e030030,
+ 0xaf430e18, 0x36520002, 0x52a00008, 0x96670010, 0x8f830000, 0x8f420e10,
+ 0xac6200a8, 0x8f840000, 0x8f420e18, 0xac8200ac, 0x96670010, 0x92680020,
+ 0x24020040, 0xaf420814, 0x8f830020, 0x8f82001c, 0x00671821, 0x00621023,
+ 0xaf830020, 0x58400005, 0x8f42095c, 0x8f820000, 0xaf83001c, 0xac430054,
+ 0x8f42095c, 0x31030008, 0xaf82002c, 0x1060001a, 0x00000000, 0x8f840000,
+ 0x90820120, 0x90830121, 0x304600ff, 0x00c31823, 0x30630007, 0x24020007,
+ 0x1062000e, 0x00000000, 0x90820122, 0x304200fe, 0xa0820122, 0x8f850000,
+ 0x00061880, 0x8f840020, 0x24a20100, 0x00431021, 0x24c30001, 0x30630007,
+ 0xac440000, 0x0a000e40, 0xa0a30120, 0x90820122, 0x34420001, 0xa0820122,
+ 0x14e00003, 0x31020001, 0x10400031, 0x32510002, 0x8f820000, 0x8c43000c,
+ 0x30630001, 0x1060002c, 0x32510002, 0x3c029000, 0x8f830008, 0x34420001,
+ 0x3c048000, 0x00621825, 0xaf430020, 0x8f420020, 0x00441024, 0x1440fffd,
+ 0x00000000, 0x8f870000, 0x8ce2000c, 0x30420001, 0x10400018, 0x00000000,
+ 0x94e2006a, 0x00022880, 0x50a00001, 0x24050001, 0x94e30068, 0x90e40081,
+ 0x3c020800, 0x8c460024, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001,
+ 0x00a03021, 0x3c020800, 0x8c440028, 0x00c4182b, 0x54600001, 0x00c02021,
+ 0x8f430074, 0x2402fffe, 0x00822824, 0x00a31821, 0xace3000c, 0x8f830008,
+ 0x3c028000, 0x34420001, 0x00621825, 0xaf430020, 0x8f830020, 0x3c020800,
+ 0x24504120, 0xae030024, 0x8ee20010, 0x0040f809, 0x00000000, 0x12a00005,
+ 0x00000000, 0x8f420e10, 0xae02002c, 0x8f430e18, 0xae030030, 0x1220feba,
+ 0x0000a821, 0x8f870024, 0x97860028, 0x8f830000, 0x8f820030, 0x8f840020,
+ 0x8f85001c, 0x32500040, 0xa4e6002c, 0xac620044, 0x32420008, 0xac640050,
+ 0xac650054, 0x1040007a, 0x32820020, 0x10400027, 0x32910010, 0x24072000,
+ 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, 0x1440fffd, 0x8ec2414c,
+ 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, 0x3c030400, 0xaf420148,
+ 0x24020041, 0xaf43014c, 0x00001821, 0xa3420152, 0x3c021000, 0xa7430158,
+ 0xaf470154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, 0x24630001,
+ 0xad230030, 0x93420109, 0x9343010a, 0xafa70014, 0xafa00018, 0x00021600,
+ 0x00031c00, 0x00431025, 0x34424100, 0xafa20010, 0x8f440100, 0x0e000fe1,
+ 0x3c070400, 0x12200028, 0x24072000, 0x3c090800, 0x3c038000, 0x8f420178,
+ 0x00431024, 0x1440fffd, 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144,
+ 0x8c820030, 0x3c030300, 0xaf420148, 0x2402004e, 0xaf43014c, 0x00001821,
+ 0xa3420152, 0x3c021000, 0xa7430158, 0xaf470154, 0xaf420178, 0x8ec5414c,
+ 0x8d230030, 0x8c860030, 0x24630001, 0xad230030, 0x93420109, 0x9343010a,
+ 0xafa70014, 0xafa00018, 0x00021600, 0x00031c00, 0x00431025, 0x34424e00,
+ 0xafa20010, 0x8f440100, 0x0e000fe1, 0x3c070300, 0x0a000f0b, 0x8fa30024,
+ 0x32820008, 0x10400026, 0x3c090800, 0x24072000, 0x3c038000, 0x8f420178,
+ 0x00431024, 0x1440fffd, 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144,
+ 0x8c820030, 0x3c030200, 0xaf420148, 0x2402004b, 0xaf43014c, 0x00001821,
+ 0xa3420152, 0x3c021000, 0xa7430158, 0xaf470154, 0xaf420178, 0x8ec5414c,
+ 0x8d230030, 0x8c860030, 0x24630001, 0xad230030, 0x93420109, 0x9343010a,
+ 0xafa70014, 0xafa00018, 0x00021600, 0x00031c00, 0x00431025, 0x34424b00,
+ 0xafa20010, 0x8f440100, 0x0e000fe1, 0x3c070200, 0x8fa30024, 0x14600004,
+ 0x8fa40020, 0x32420010, 0x10400004, 0x00000000, 0x8c820004, 0x0040f809,
+ 0x00000000, 0x12000006, 0x8fa30020, 0x8c620008, 0x0040f809, 0x00000000,
+ 0x0a000f4d, 0x8fbf004c, 0x3c030800, 0x8c62413c, 0x30420040, 0x1440002f,
+ 0x8fbf004c, 0x24040040, 0x8f910020, 0x3c038000, 0x8f420178, 0x00431024,
+ 0x1440fffd, 0x8ec2414c, 0x26d0414c, 0x2610ffd4, 0xaf420144, 0x8e020030,
+ 0x00001821, 0xaf420148, 0x24020049, 0xaf51014c, 0xa3420152, 0x3c021000,
+ 0xa7430158, 0xaf440154, 0xaf420178, 0x8ec5414c, 0x8e060030, 0x93420109,
+ 0x9343010a, 0xafa40014, 0xafa00018, 0x00021600, 0x00031c00, 0x00431025,
+ 0x34424900, 0xafa20010, 0x8f440100, 0x0e000fe1, 0x02203821, 0x8f830000,
+ 0x8e020030, 0x8c64017c, 0x02221023, 0x00441023, 0x2c420002, 0x14400005,
+ 0x8fbf004c, 0x0000000d, 0x00000000, 0x240000ca, 0x8fbf004c, 0x8fbe0048,
+ 0x8fb70044, 0x8fb60040, 0x8fb5003c, 0x8fb40038, 0x8fb30034, 0x8fb20030,
+ 0x8fb1002c, 0x8fb00028, 0x03e00008, 0x27bd0050, 0x03e00008, 0x00001021,
+ 0x3c030800, 0x24654120, 0x8ca40004, 0x8c634120, 0x0064102b, 0x54400001,
+ 0x00602021, 0x9743093c, 0x0083102b, 0x54400001, 0x00801821, 0x00001021,
+ 0xaca30008, 0x03e00008, 0xa4a00022, 0x8f850004, 0x97840010, 0x3c030800,
+ 0x24634120, 0x24020008, 0xa462000e, 0x8f820004, 0xa460000c, 0x000420c2,
+ 0x30840008, 0x2c420001, 0x00021023, 0x30420006, 0xac650008, 0x03e00008,
+ 0xa0640020, 0x3c020800, 0x24424120, 0x90450021, 0x94430018, 0x3c021100,
+ 0xac800004, 0x00052c00, 0x24630002, 0x00621825, 0x00a32825, 0x24820008,
+ 0x03e00008, 0xac850000, 0x0000000d, 0x00000000, 0x2400016f, 0x03e00008,
+ 0x00000000, 0x0000000d, 0x00000000, 0x2400017b, 0x03e00008, 0x00000000,
+ 0x03e00008, 0x00000000, 0x3c020800, 0x24424120, 0xac400008, 0xa4400022,
+ 0x03e00008, 0x24020001, 0x3c020800, 0x24424120, 0x24030008, 0xac400008,
+ 0xa440000c, 0xa443000e, 0xa0400020, 0x03e00008, 0x24020004, 0x03e00008,
+ 0x00001021, 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004,
+ 0xac820000, 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a000fb2,
+ 0x00a01021, 0xac860000, 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff,
+ 0x03e00008, 0x00000000, 0x3c0a0800, 0x8d490068, 0x3c050800, 0x24a51090,
+ 0x00093140, 0x00c51021, 0xac440000, 0x8f440e04, 0x00a61021, 0xac440004,
+ 0x97430e08, 0x97420e0c, 0x00a62021, 0x00031c00, 0x00431025, 0xac820008,
+ 0x8f430e10, 0x00801021, 0xac43000c, 0x8f440e14, 0xac440010, 0x8f430e18,
+ 0x3c0800ff, 0xac430014, 0x8f470e1c, 0x3508ffff, 0x25290001, 0xac470018,
+ 0x3c070800, 0x8ce3006c, 0x9344010a, 0x3c026000, 0x24630001, 0xace3006c,
+ 0x8c434448, 0x3129007f, 0x00a62821, 0xad490068, 0x00042600, 0x00681824,
+ 0x00832025, 0x03e00008, 0xaca4001c, 0x8fac0010, 0x8fad0014, 0x8fae0018,
+ 0x3c0b0800, 0x8d6a0060, 0x3c080800, 0x25080078, 0x000a4940, 0x01281021,
+ 0x01091821, 0xac440000, 0x00601021, 0xac650004, 0xac460008, 0xac67000c,
+ 0xac4c0010, 0xac6d0014, 0x3c036000, 0xac4e0018, 0x8c654448, 0x3c040800,
+ 0x8c820064, 0x254a0001, 0x314a007f, 0x01094021, 0xad6a0060, 0x24420001,
+ 0xac820064, 0x03e00008, 0xad05001c, 0x00000000 };
+
+static u32 bnx2_TXP_b06FwData[(0x0/4) + 1] = { 0x00000000 };
+static u32 bnx2_TXP_b06FwRodata[(0x0/4) + 1] = { 0x00000000 };
+static u32 bnx2_TXP_b06FwBss[(0x194/4) + 1] = { 0x00000000 };
+static u32 bnx2_TXP_b06FwSbss[(0x34/4) + 1] = { 0x00000000 };
+
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 770e28f..269a5e4 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3037,7 +3037,7 @@
bond_set_slave_inactive_flags(bond->current_arp_slave);
/* search for next candidate */
- bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave) {
+ bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave->next) {
if (IS_UP(slave->dev)) {
slave->link = BOND_LINK_BACK;
bond_set_slave_active_flags(slave);
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
new file mode 100644
index 0000000..f4ba0ff
--- /dev/null
+++ b/drivers/net/dm9000.c
@@ -0,0 +1,1219 @@
+/*
+ * dm9000.c: Version 1.2 03/18/2003
+ *
+ * A Davicom DM9000 ISA NIC fast Ethernet driver for Linux.
+ * Copyright (C) 1997 Sten Wang
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
+ *
+ * V0.11 06/20/2001 REG_0A bit3=1, default enable BP with DA match
+ * 06/22/2001 Support DM9801 progrmming
+ * E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000
+ * E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200
+ * R17 = (R17 & 0xfff0) | NF + 3
+ * E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200
+ * R17 = (R17 & 0xfff0) | NF
+ *
+ * v1.00 modify by simon 2001.9.5
+ * change for kernel 2.4.x
+ *
+ * v1.1 11/09/2001 fix force mode bug
+ *
+ * v1.2 03/18/2003 Weilun Huang <weilun_huang@davicom.com.tw>:
+ * Fixed phy reset.
+ * Added tx/rx 32 bit mode.
+ * Cleaned up for kernel merge.
+ *
+ * 03/03/2004 Sascha Hauer <s.hauer@pengutronix.de>
+ * Port to 2.6 kernel
+ *
+ * 24-Sep-2004 Ben Dooks <ben@simtec.co.uk>
+ * Cleanup of code to remove ifdefs
+ * Allowed platform device data to influence access width
+ * Reformatting areas of code
+ *
+ * 17-Mar-2005 Sascha Hauer <s.hauer@pengutronix.de>
+ * * removed 2.4 style module parameters
+ * * removed removed unused stat counter and fixed
+ * net_device_stats
+ * * introduced tx_timeout function
+ * * reworked locking
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/version.h>
+#include <linux/spinlock.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/dm9000.h>
+#include <linux/delay.h>
+
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include "dm9000.h"
+
+/* Board/System/Debug information/definition ---------------- */
+
+#define DM9000_PHY 0x40 /* PHY address 0x01 */
+
+#define TRUE 1
+#define FALSE 0
+
+#define CARDNAME "dm9000"
+#define PFX CARDNAME ": "
+
+#define DM9000_TIMER_WUT jiffies+(HZ*2) /* timer wakeup time : 2 second */
+
+#define DM9000_DEBUG 0
+
+#if DM9000_DEBUG > 2
+#define PRINTK3(args...) printk(CARDNAME ": " args)
+#else
+#define PRINTK3(args...) do { } while(0)
+#endif
+
+#if DM9000_DEBUG > 1
+#define PRINTK2(args...) printk(CARDNAME ": " args)
+#else
+#define PRINTK2(args...) do { } while(0)
+#endif
+
+#if DM9000_DEBUG > 0
+#define PRINTK1(args...) printk(CARDNAME ": " args)
+#define PRINTK(args...) printk(CARDNAME ": " args)
+#else
+#define PRINTK1(args...) do { } while(0)
+#define PRINTK(args...) printk(KERN_DEBUG args)
+#endif
+
+/*
+ * Transmit timeout, default 5 seconds.
+ */
+static int watchdog = 5000;
+module_param(watchdog, int, 0400);
+MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
+
+/* Structure/enum declaration ------------------------------- */
+typedef struct board_info {
+
+ void __iomem *io_addr; /* Register I/O base address */
+ void __iomem *io_data; /* Data I/O address */
+ u16 irq; /* IRQ */
+
+ u16 tx_pkt_cnt;
+ u16 queue_pkt_len;
+ u16 queue_start_addr;
+ u16 dbug_cnt;
+ u8 io_mode; /* 0:word, 2:byte */
+ u8 phy_addr;
+
+ void (*inblk)(void __iomem *port, void *data, int length);
+ void (*outblk)(void __iomem *port, void *data, int length);
+ void (*dumpblk)(void __iomem *port, int length);
+
+ struct resource *addr_res; /* resources found */
+ struct resource *data_res;
+ struct resource *addr_req; /* resources requested */
+ struct resource *data_req;
+ struct resource *irq_res;
+
+ struct timer_list timer;
+ struct net_device_stats stats;
+ unsigned char srom[128];
+ spinlock_t lock;
+
+ struct mii_if_info mii;
+ u32 msg_enable;
+} board_info_t;
+
+/* function declaration ------------------------------------- */
+static int dm9000_probe(struct device *);
+static int dm9000_open(struct net_device *);
+static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
+static int dm9000_stop(struct net_device *);
+static int dm9000_do_ioctl(struct net_device *, struct ifreq *, int);
+
+
+static void dm9000_timer(unsigned long);
+static void dm9000_init_dm9000(struct net_device *);
+
+static struct net_device_stats *dm9000_get_stats(struct net_device *);
+
+static irqreturn_t dm9000_interrupt(int, void *, struct pt_regs *);
+
+static int dm9000_phy_read(struct net_device *dev, int phyaddr_unsused, int reg);
+static void dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg,
+ int value);
+static u16 read_srom_word(board_info_t *, int);
+static void dm9000_rx(struct net_device *);
+static void dm9000_hash_table(struct net_device *);
+
+//#define DM9000_PROGRAM_EEPROM
+#ifdef DM9000_PROGRAM_EEPROM
+static void program_eeprom(board_info_t * db);
+#endif
+/* DM9000 network board routine ---------------------------- */
+
+static void
+dm9000_reset(board_info_t * db)
+{
+ PRINTK1("dm9000x: resetting\n");
+ /* RESET device */
+ writeb(DM9000_NCR, db->io_addr);
+ udelay(200);
+ writeb(NCR_RST, db->io_data);
+ udelay(200);
+}
+
+/*
+ * Read a byte from I/O port
+ */
+static u8
+ior(board_info_t * db, int reg)
+{
+ writeb(reg, db->io_addr);
+ return readb(db->io_data);
+}
+
+/*
+ * Write a byte to I/O port
+ */
+
+static void
+iow(board_info_t * db, int reg, int value)
+{
+ writeb(reg, db->io_addr);
+ writeb(value, db->io_data);
+}
+
+/* routines for sending block to chip */
+
+static void dm9000_outblk_8bit(void __iomem *reg, void *data, int count)
+{
+ writesb(reg, data, count);
+}
+
+static void dm9000_outblk_16bit(void __iomem *reg, void *data, int count)
+{
+ writesw(reg, data, (count+1) >> 1);
+}
+
+static void dm9000_outblk_32bit(void __iomem *reg, void *data, int count)
+{
+ writesl(reg, data, (count+3) >> 2);
+}
+
+/* input block from chip to memory */
+
+static void dm9000_inblk_8bit(void __iomem *reg, void *data, int count)
+{
+ readsb(reg, data, count+1);
+}
+
+
+static void dm9000_inblk_16bit(void __iomem *reg, void *data, int count)
+{
+ readsw(reg, data, (count+1) >> 1);
+}
+
+static void dm9000_inblk_32bit(void __iomem *reg, void *data, int count)
+{
+ readsl(reg, data, (count+3) >> 2);
+}
+
+/* dump block from chip to null */
+
+static void dm9000_dumpblk_8bit(void __iomem *reg, int count)
+{
+ int i;
+ int tmp;
+
+ for (i = 0; i < count; i++)
+ tmp = readb(reg);
+}
+
+static void dm9000_dumpblk_16bit(void __iomem *reg, int count)
+{
+ int i;
+ int tmp;
+
+ count = (count + 1) >> 1;
+
+ for (i = 0; i < count; i++)
+ tmp = readw(reg);
+}
+
+static void dm9000_dumpblk_32bit(void __iomem *reg, int count)
+{
+ int i;
+ int tmp;
+
+ count = (count + 3) >> 2;
+
+ for (i = 0; i < count; i++)
+ tmp = readl(reg);
+}
+
+/* dm9000_set_io
+ *
+ * select the specified set of io routines to use with the
+ * device
+ */
+
+static void dm9000_set_io(struct board_info *db, int byte_width)
+{
+ /* use the size of the data resource to work out what IO
+ * routines we want to use
+ */
+
+ switch (byte_width) {
+ case 1:
+ db->dumpblk = dm9000_dumpblk_8bit;
+ db->outblk = dm9000_outblk_8bit;
+ db->inblk = dm9000_inblk_8bit;
+ break;
+
+ case 2:
+ db->dumpblk = dm9000_dumpblk_16bit;
+ db->outblk = dm9000_outblk_16bit;
+ db->inblk = dm9000_inblk_16bit;
+ break;
+
+ case 3:
+ printk(KERN_ERR PFX ": 3 byte IO, falling back to 16bit\n");
+ db->dumpblk = dm9000_dumpblk_16bit;
+ db->outblk = dm9000_outblk_16bit;
+ db->inblk = dm9000_inblk_16bit;
+ break;
+
+ case 4:
+ default:
+ db->dumpblk = dm9000_dumpblk_32bit;
+ db->outblk = dm9000_outblk_32bit;
+ db->inblk = dm9000_inblk_32bit;
+ break;
+ }
+}
+
+
+/* Our watchdog timed out. Called by the networking layer */
+static void dm9000_timeout(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ u8 reg_save;
+ unsigned long flags;
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+ spin_lock_irqsave(db->lock,flags);
+
+ netif_stop_queue(dev);
+ dm9000_reset(db);
+ dm9000_init_dm9000(dev);
+ /* We can accept TX packets again */
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+
+ /* Restore previous register address */
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(db->lock,flags);
+}
+
+
+/* dm9000_release_board
+ *
+ * release a board, and any mapped resources
+ */
+
+static void
+dm9000_release_board(struct platform_device *pdev, struct board_info *db)
+{
+ if (db->data_res == NULL) {
+ if (db->addr_res != NULL)
+ release_mem_region((unsigned long)db->io_addr, 4);
+ return;
+ }
+
+ /* unmap our resources */
+
+ iounmap(db->io_addr);
+ iounmap(db->io_data);
+
+ /* release the resources */
+
+ if (db->data_req != NULL) {
+ release_resource(db->data_req);
+ kfree(db->data_req);
+ }
+
+ if (db->addr_res != NULL) {
+ release_resource(db->data_req);
+ kfree(db->addr_req);
+ }
+}
+
+#define res_size(_r) (((_r)->end - (_r)->start) + 1)
+
+/*
+ * Search DM9000 board, allocate space and register it
+ */
+static int
+dm9000_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct dm9000_plat_data *pdata = pdev->dev.platform_data;
+ struct board_info *db; /* Point a board information structure */
+ struct net_device *ndev;
+ unsigned long base;
+ int ret = 0;
+ int iosize;
+ int i;
+ u32 id_val;
+
+ printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
+
+ /* Init network device */
+ ndev = alloc_etherdev(sizeof (struct board_info));
+ if (!ndev) {
+ printk("%s: could not allocate device.\n", CARDNAME);
+ return -ENOMEM;
+ }
+
+ SET_MODULE_OWNER(ndev);
+ SET_NETDEV_DEV(ndev, dev);
+
+ PRINTK2("dm9000_probe()");
+
+ /* setup board info structure */
+ db = (struct board_info *) ndev->priv;
+ memset(db, 0, sizeof (*db));
+
+ if (pdev->num_resources < 2) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ switch (pdev->num_resources) {
+ case 2:
+ base = pdev->resource[0].start;
+
+ if (!request_mem_region(base, 4, ndev->name)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ ndev->base_addr = base;
+ ndev->irq = pdev->resource[1].start;
+ db->io_addr = (void *)base;
+ db->io_data = (void *)(base + 4);
+
+ break;
+
+ case 3:
+ db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ db->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+ if (db->addr_res == NULL || db->data_res == NULL) {
+ printk(KERN_ERR PFX "insufficient resources\n");
+ ret = -ENOENT;
+ goto out;
+ }
+
+ i = res_size(db->addr_res);
+ db->addr_req = request_mem_region(db->addr_res->start, i,
+ pdev->name);
+
+ if (db->addr_req == NULL) {
+ printk(KERN_ERR PFX "cannot claim address reg area\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ db->io_addr = ioremap(db->addr_res->start, i);
+
+ if (db->io_addr == NULL) {
+ printk(KERN_ERR "failed to ioremap address reg\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ iosize = res_size(db->data_res);
+ db->data_req = request_mem_region(db->data_res->start, iosize,
+ pdev->name);
+
+ if (db->data_req == NULL) {
+ printk(KERN_ERR PFX "cannot claim data reg area\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ db->io_data = ioremap(db->data_res->start, iosize);
+
+ if (db->io_data == NULL) {
+ printk(KERN_ERR "failed to ioremap data reg\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* fill in parameters for net-dev structure */
+
+ ndev->base_addr = (unsigned long)db->io_addr;
+ ndev->irq = db->irq_res->start;
+
+ /* ensure at least we have a default set of IO routines */
+ dm9000_set_io(db, iosize);
+
+ }
+
+ /* check to see if anything is being over-ridden */
+ if (pdata != NULL) {
+ /* check to see if the driver wants to over-ride the
+ * default IO width */
+
+ if (pdata->flags & DM9000_PLATF_8BITONLY)
+ dm9000_set_io(db, 1);
+
+ if (pdata->flags & DM9000_PLATF_16BITONLY)
+ dm9000_set_io(db, 2);
+
+ if (pdata->flags & DM9000_PLATF_32BITONLY)
+ dm9000_set_io(db, 4);
+
+ /* check to see if there are any IO routine
+ * over-rides */
+
+ if (pdata->inblk != NULL)
+ db->inblk = pdata->inblk;
+
+ if (pdata->outblk != NULL)
+ db->outblk = pdata->outblk;
+
+ if (pdata->dumpblk != NULL)
+ db->dumpblk = pdata->dumpblk;
+ }
+
+ dm9000_reset(db);
+
+ /* try two times, DM9000 sometimes gets the first read wrong */
+ for (i = 0; i < 2; i++) {
+ id_val = ior(db, DM9000_VIDL);
+ id_val |= (u32)ior(db, DM9000_VIDH) << 8;
+ id_val |= (u32)ior(db, DM9000_PIDL) << 16;
+ id_val |= (u32)ior(db, DM9000_PIDH) << 24;
+
+ if (id_val == DM9000_ID)
+ break;
+ printk("%s: read wrong id 0x%08x\n", CARDNAME, id_val);
+ }
+
+ if (id_val != DM9000_ID) {
+ printk("%s: wrong id: 0x%08x\n", CARDNAME, id_val);
+ goto release;
+ }
+
+ /* from this point we assume that we have found a DM9000 */
+
+ /* driver system function */
+ ether_setup(ndev);
+
+ ndev->open = &dm9000_open;
+ ndev->hard_start_xmit = &dm9000_start_xmit;
+ ndev->tx_timeout = &dm9000_timeout;
+ ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
+ ndev->stop = &dm9000_stop;
+ ndev->get_stats = &dm9000_get_stats;
+ ndev->set_multicast_list = &dm9000_hash_table;
+ ndev->do_ioctl = &dm9000_do_ioctl;
+
+#ifdef DM9000_PROGRAM_EEPROM
+ program_eeprom(db);
+#endif
+ db->msg_enable = NETIF_MSG_LINK;
+ db->mii.phy_id_mask = 0x1f;
+ db->mii.reg_num_mask = 0x1f;
+ db->mii.force_media = 0;
+ db->mii.full_duplex = 0;
+ db->mii.dev = ndev;
+ db->mii.mdio_read = dm9000_phy_read;
+ db->mii.mdio_write = dm9000_phy_write;
+
+ /* Read SROM content */
+ for (i = 0; i < 64; i++)
+ ((u16 *) db->srom)[i] = read_srom_word(db, i);
+
+ /* Set Node Address */
+ for (i = 0; i < 6; i++)
+ ndev->dev_addr[i] = db->srom[i];
+
+ if (!is_valid_ether_addr(ndev->dev_addr))
+ printk("%s: Invalid ethernet MAC address. Please "
+ "set using ifconfig\n", ndev->name);
+
+ dev_set_drvdata(dev, ndev);
+ ret = register_netdev(ndev);
+
+ if (ret == 0) {
+ printk("%s: dm9000 at %p,%p IRQ %d MAC: ",
+ ndev->name, db->io_addr, db->io_data, ndev->irq);
+ for (i = 0; i < 5; i++)
+ printk("%02x:", ndev->dev_addr[i]);
+ printk("%02x\n", ndev->dev_addr[5]);
+ }
+ return 0;
+
+ release:
+ out:
+ printk("%s: not found (%d).\n", CARDNAME, ret);
+
+ dm9000_release_board(pdev, db);
+ kfree(ndev);
+
+ return ret;
+}
+
+/*
+ * Open the interface.
+ * The interface is opened whenever "ifconfig" actives it.
+ */
+static int
+dm9000_open(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+
+ PRINTK2("entering dm9000_open\n");
+
+ if (request_irq(dev->irq, &dm9000_interrupt, SA_SHIRQ, dev->name, dev))
+ return -EAGAIN;
+
+ /* Initialize DM9000 board */
+ dm9000_reset(db);
+ dm9000_init_dm9000(dev);
+
+ /* Init driver variable */
+ db->dbug_cnt = 0;
+
+ /* set and active a timer process */
+ init_timer(&db->timer);
+ db->timer.expires = DM9000_TIMER_WUT * 2;
+ db->timer.data = (unsigned long) dev;
+ db->timer.function = &dm9000_timer;
+ add_timer(&db->timer);
+
+ mii_check_media(&db->mii, netif_msg_link(db), 1);
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/*
+ * Initilize dm9000 board
+ */
+static void
+dm9000_init_dm9000(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+
+ PRINTK1("entering %s\n",__FUNCTION__);
+
+ /* I/O mode */
+ db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */
+
+ /* GPIO0 on pre-activate PHY */
+ iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
+ iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
+ iow(db, DM9000_GPR, 0); /* Enable PHY */
+
+ /* Program operating register */
+ iow(db, DM9000_TCR, 0); /* TX Polling clear */
+ iow(db, DM9000_BPTR, 0x3f); /* Less 3Kb, 200us */
+ iow(db, DM9000_FCR, 0xff); /* Flow Control */
+ iow(db, DM9000_SMCR, 0); /* Special Mode */
+ /* clear TX status */
+ iow(db, DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END);
+ iow(db, DM9000_ISR, ISR_CLR_STATUS); /* Clear interrupt status */
+
+ /* Set address filter table */
+ dm9000_hash_table(dev);
+
+ /* Activate DM9000 */
+ iow(db, DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN);
+ /* Enable TX/RX interrupt mask */
+ iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
+
+ /* Init Driver variable */
+ db->tx_pkt_cnt = 0;
+ db->queue_pkt_len = 0;
+ dev->trans_start = 0;
+ spin_lock_init(&db->lock);
+}
+
+/*
+ * Hardware start transmission.
+ * Send a packet to media from the upper layer.
+ */
+static int
+dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+
+ PRINTK3("dm9000_start_xmit\n");
+
+ if (db->tx_pkt_cnt > 1)
+ return 1;
+
+ netif_stop_queue(dev);
+
+ /* Disable all interrupts */
+ iow(db, DM9000_IMR, IMR_PAR);
+
+ /* Move data to DM9000 TX RAM */
+ writeb(DM9000_MWCMD, db->io_addr);
+
+ (db->outblk)(db->io_data, skb->data, skb->len);
+ db->stats.tx_bytes += skb->len;
+
+ /* TX control: First packet immediately send, second packet queue */
+ if (db->tx_pkt_cnt == 0) {
+
+ /* First Packet */
+ db->tx_pkt_cnt++;
+
+ /* Set TX length to DM9000 */
+ iow(db, DM9000_TXPLL, skb->len & 0xff);
+ iow(db, DM9000_TXPLH, (skb->len >> 8) & 0xff);
+
+ /* Issue TX polling command */
+ iow(db, DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
+
+ dev->trans_start = jiffies; /* save the time stamp */
+
+ } else {
+ /* Second packet */
+ db->tx_pkt_cnt++;
+ db->queue_pkt_len = skb->len;
+ }
+
+ /* free this SKB */
+ dev_kfree_skb(skb);
+
+ /* Re-enable resource check */
+ if (db->tx_pkt_cnt == 1)
+ netif_wake_queue(dev);
+
+ /* Re-enable interrupt */
+ iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
+
+ return 0;
+}
+
+static void
+dm9000_shutdown(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+
+ /* RESET device */
+ dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */
+ iow(db, DM9000_GPR, 0x01); /* Power-Down PHY */
+ iow(db, DM9000_IMR, IMR_PAR); /* Disable all interrupt */
+ iow(db, DM9000_RCR, 0x00); /* Disable RX */
+}
+
+/*
+ * Stop the interface.
+ * The interface is stopped when it is brought.
+ */
+static int
+dm9000_stop(struct net_device *ndev)
+{
+ board_info_t *db = (board_info_t *) ndev->priv;
+
+ PRINTK1("entering %s\n",__FUNCTION__);
+
+ /* deleted timer */
+ del_timer(&db->timer);
+
+ netif_stop_queue(ndev);
+ netif_carrier_off(ndev);
+
+ /* free interrupt */
+ free_irq(ndev->irq, ndev);
+
+ dm9000_shutdown(ndev);
+
+ return 0;
+}
+
+/*
+ * DM9000 interrupt handler
+ * receive the packet to upper layer, free the transmitted packet
+ */
+
+void
+dm9000_tx_done(struct net_device *dev, board_info_t * db)
+{
+ int tx_status = ior(db, DM9000_NSR); /* Got TX status */
+
+ if (tx_status & (NSR_TX2END | NSR_TX1END)) {
+ /* One packet sent complete */
+ db->tx_pkt_cnt--;
+ db->stats.tx_packets++;
+
+ /* Queue packet check & send */
+ if (db->tx_pkt_cnt > 0) {
+ iow(db, DM9000_TXPLL, db->queue_pkt_len & 0xff);
+ iow(db, DM9000_TXPLH, (db->queue_pkt_len >> 8) & 0xff);
+ iow(db, DM9000_TCR, TCR_TXREQ);
+ dev->trans_start = jiffies;
+ }
+ netif_wake_queue(dev);
+ }
+}
+
+static irqreturn_t
+dm9000_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ board_info_t *db;
+ int int_status;
+ u8 reg_save;
+
+ PRINTK3("entering %s\n",__FUNCTION__);
+
+ if (!dev) {
+ PRINTK1("dm9000_interrupt() without DEVICE arg\n");
+ return IRQ_HANDLED;
+ }
+
+ /* A real interrupt coming */
+ db = (board_info_t *) dev->priv;
+ spin_lock(&db->lock);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ /* Disable all interrupts */
+ iow(db, DM9000_IMR, IMR_PAR);
+
+ /* Got DM9000 interrupt status */
+ int_status = ior(db, DM9000_ISR); /* Got ISR */
+ iow(db, DM9000_ISR, int_status); /* Clear ISR status */
+
+ /* Received the coming packet */
+ if (int_status & ISR_PRS)
+ dm9000_rx(dev);
+
+ /* Trnasmit Interrupt check */
+ if (int_status & ISR_PTS)
+ dm9000_tx_done(dev, db);
+
+ /* Re-enable interrupt mask */
+ iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
+
+ /* Restore previous register address */
+ writeb(reg_save, db->io_addr);
+
+ spin_unlock(&db->lock);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Get statistics from driver.
+ */
+static struct net_device_stats *
+dm9000_get_stats(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ return &db->stats;
+}
+
+/*
+ * Process the upper socket ioctl command
+ */
+static int
+dm9000_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ PRINTK1("entering %s\n",__FUNCTION__);
+ return 0;
+}
+
+/*
+ * A periodic timer routine
+ * Dynamic media sense, allocated Rx buffer...
+ */
+static void
+dm9000_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ board_info_t *db = (board_info_t *) dev->priv;
+ u8 reg_save;
+ unsigned long flags;
+
+ PRINTK3("dm9000_timer()\n");
+
+ spin_lock_irqsave(db->lock,flags);
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ mii_check_media(&db->mii, netif_msg_link(db), 0);
+
+ /* Restore previous register address */
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(db->lock,flags);
+
+ /* Set timer again */
+ db->timer.expires = DM9000_TIMER_WUT;
+ add_timer(&db->timer);
+}
+
+struct dm9000_rxhdr {
+ u16 RxStatus;
+ u16 RxLen;
+} __attribute__((__packed__));
+
+/*
+ * Received a packet and pass to upper layer
+ */
+static void
+dm9000_rx(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ struct dm9000_rxhdr rxhdr;
+ struct sk_buff *skb;
+ u8 rxbyte, *rdptr;
+ int GoodPacket;
+ int RxLen;
+
+ /* Check packet ready or not */
+ do {
+ ior(db, DM9000_MRCMDX); /* Dummy read */
+
+ /* Get most updated data */
+ rxbyte = readb(db->io_data);
+
+ /* Status check: this byte must be 0 or 1 */
+ if (rxbyte > DM9000_PKT_RDY) {
+ printk("status check failed: %d\n", rxbyte);
+ iow(db, DM9000_RCR, 0x00); /* Stop Device */
+ iow(db, DM9000_ISR, IMR_PAR); /* Stop INT request */
+ return;
+ }
+
+ if (rxbyte != DM9000_PKT_RDY)
+ return;
+
+ /* A packet ready now & Get status/length */
+ GoodPacket = TRUE;
+ writeb(DM9000_MRCMD, db->io_addr);
+
+ (db->inblk)(db->io_data, &rxhdr, sizeof(rxhdr));
+
+ RxLen = rxhdr.RxLen;
+
+ /* Packet Status check */
+ if (RxLen < 0x40) {
+ GoodPacket = FALSE;
+ PRINTK1("Bad Packet received (runt)\n");
+ }
+
+ if (RxLen > DM9000_PKT_MAX) {
+ PRINTK1("RST: RX Len:%x\n", RxLen);
+ }
+
+ if (rxhdr.RxStatus & 0xbf00) {
+ GoodPacket = FALSE;
+ if (rxhdr.RxStatus & 0x100) {
+ PRINTK1("fifo error\n");
+ db->stats.rx_fifo_errors++;
+ }
+ if (rxhdr.RxStatus & 0x200) {
+ PRINTK1("crc error\n");
+ db->stats.rx_crc_errors++;
+ }
+ if (rxhdr.RxStatus & 0x8000) {
+ PRINTK1("length error\n");
+ db->stats.rx_length_errors++;
+ }
+ }
+
+ /* Move data from DM9000 */
+ if (GoodPacket
+ && ((skb = dev_alloc_skb(RxLen + 4)) != NULL)) {
+ skb->dev = dev;
+ skb_reserve(skb, 2);
+ rdptr = (u8 *) skb_put(skb, RxLen - 4);
+
+ /* Read received packet from RX SRAM */
+
+ (db->inblk)(db->io_data, rdptr, RxLen);
+ db->stats.rx_bytes += RxLen;
+
+ /* Pass to upper layer */
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ db->stats.rx_packets++;
+
+ } else {
+ /* need to dump the packet's data */
+
+ (db->dumpblk)(db->io_data, RxLen);
+ }
+ } while (rxbyte == DM9000_PKT_RDY);
+}
+
+/*
+ * Read a word data from SROM
+ */
+static u16
+read_srom_word(board_info_t * db, int offset)
+{
+ iow(db, DM9000_EPAR, offset);
+ iow(db, DM9000_EPCR, EPCR_ERPRR);
+ mdelay(8); /* according to the datasheet 200us should be enough,
+ but it doesn't work */
+ iow(db, DM9000_EPCR, 0x0);
+ return (ior(db, DM9000_EPDRL) + (ior(db, DM9000_EPDRH) << 8));
+}
+
+#ifdef DM9000_PROGRAM_EEPROM
+/*
+ * Write a word data to SROM
+ */
+static void
+write_srom_word(board_info_t * db, int offset, u16 val)
+{
+ iow(db, DM9000_EPAR, offset);
+ iow(db, DM9000_EPDRH, ((val >> 8) & 0xff));
+ iow(db, DM9000_EPDRL, (val & 0xff));
+ iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW);
+ mdelay(8); /* same shit */
+ iow(db, DM9000_EPCR, 0);
+}
+
+/*
+ * Only for development:
+ * Here we write static data to the eeprom in case
+ * we don't have valid content on a new board
+ */
+static void
+program_eeprom(board_info_t * db)
+{
+ u16 eeprom[] = { 0x0c00, 0x007f, 0x1300, /* MAC Address */
+ 0x0000, /* Autoload: accept nothing */
+ 0x0a46, 0x9000, /* Vendor / Product ID */
+ 0x0000, /* pin control */
+ 0x0000,
+ }; /* Wake-up mode control */
+ int i;
+ for (i = 0; i < 8; i++)
+ write_srom_word(db, i, eeprom[i]);
+}
+#endif
+
+
+/*
+ * Calculate the CRC valude of the Rx packet
+ * flag = 1 : return the reverse CRC (for the received packet CRC)
+ * 0 : return the normal CRC (for Hash Table index)
+ */
+
+static unsigned long
+cal_CRC(unsigned char *Data, unsigned int Len, u8 flag)
+{
+
+ u32 crc = ether_crc_le(Len, Data);
+
+ if (flag)
+ return ~crc;
+
+ return crc;
+}
+
+/*
+ * Set DM9000 multicast address
+ */
+static void
+dm9000_hash_table(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ struct dev_mc_list *mcptr = dev->mc_list;
+ int mc_cnt = dev->mc_count;
+ u32 hash_val;
+ u16 i, oft, hash_table[4];
+ unsigned long flags;
+
+ PRINTK2("dm9000_hash_table()\n");
+
+ spin_lock_irqsave(&db->lock,flags);
+
+ for (i = 0, oft = 0x10; i < 6; i++, oft++)
+ iow(db, oft, dev->dev_addr[i]);
+
+ /* Clear Hash Table */
+ for (i = 0; i < 4; i++)
+ hash_table[i] = 0x0;
+
+ /* broadcast address */
+ hash_table[3] = 0x8000;
+
+ /* the multicast address in Hash Table : 64 bits */
+ for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ hash_val = cal_CRC((char *) mcptr->dmi_addr, 6, 0) & 0x3f;
+ hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
+ }
+
+ /* Write the hash table to MAC MD table */
+ for (i = 0, oft = 0x16; i < 4; i++) {
+ iow(db, oft++, hash_table[i] & 0xff);
+ iow(db, oft++, (hash_table[i] >> 8) & 0xff);
+ }
+
+ spin_unlock_irqrestore(&db->lock,flags);
+}
+
+
+/*
+ * Read a word from phyxcer
+ */
+static int
+dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&db->lock,flags);
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ iow(db, DM9000_EPCR, 0xc); /* Issue phyxcer read command */
+ udelay(100); /* Wait read complete */
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */
+
+ /* The read data keeps on REG_0D & REG_0E */
+ ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
+
+ spin_unlock_irqrestore(&db->lock,flags);
+
+ return ret;
+}
+
+/*
+ * Write a word to phyxcer
+ */
+static void
+dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&db->lock,flags);
+
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Fill the written data into REG_0D & REG_0E */
+ iow(db, DM9000_EPDRL, (value & 0xff));
+ iow(db, DM9000_EPDRH, ((value >> 8) & 0xff));
+
+ iow(db, DM9000_EPCR, 0xa); /* Issue phyxcer write command */
+ udelay(500); /* Wait write complete */
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
+
+ spin_unlock_irqrestore(&db->lock,flags);
+}
+
+static int
+dm9000_drv_suspend(struct device *dev, u32 state, u32 level)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+
+ if (ndev && level == SUSPEND_DISABLE) {
+ if (netif_running(ndev)) {
+ netif_device_detach(ndev);
+ dm9000_shutdown(ndev);
+ }
+ }
+ return 0;
+}
+
+static int
+dm9000_drv_resume(struct device *dev, u32 level)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ board_info_t *db = (board_info_t *) ndev->priv;
+
+ if (ndev && level == RESUME_ENABLE) {
+
+ if (netif_running(ndev)) {
+ dm9000_reset(db);
+ dm9000_init_dm9000(ndev);
+
+ netif_device_attach(ndev);
+ }
+ }
+ return 0;
+}
+
+static int
+dm9000_drv_remove(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct net_device *ndev = dev_get_drvdata(dev);
+
+ dev_set_drvdata(dev, NULL);
+
+ unregister_netdev(ndev);
+ dm9000_release_board(pdev, (board_info_t *) ndev->priv);
+ kfree(ndev); /* free device structure */
+
+ PRINTK1("clean_module() exit\n");
+
+ return 0;
+}
+
+static struct device_driver dm9000_driver = {
+ .name = "dm9000",
+ .bus = &platform_bus_type,
+ .probe = dm9000_probe,
+ .remove = dm9000_drv_remove,
+ .suspend = dm9000_drv_suspend,
+ .resume = dm9000_drv_resume,
+};
+
+static int __init
+dm9000_init(void)
+{
+ return driver_register(&dm9000_driver); /* search board and register */
+}
+
+static void __exit
+dm9000_cleanup(void)
+{
+ driver_unregister(&dm9000_driver);
+}
+
+module_init(dm9000_init);
+module_exit(dm9000_cleanup);
+
+MODULE_AUTHOR("Sascha Hauer, Ben Dooks");
+MODULE_DESCRIPTION("Davicom DM9000 network driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h
new file mode 100644
index 0000000..82cad36
--- /dev/null
+++ b/drivers/net/dm9000.h
@@ -0,0 +1,135 @@
+/*
+ * dm9000 Ethernet
+ */
+
+#ifndef _DM9000X_H_
+#define _DM9000X_H_
+
+#define DM9000_ID 0x90000A46
+
+/* although the registers are 16 bit, they are 32-bit aligned.
+ */
+
+#define DM9000_NCR 0x00
+#define DM9000_NSR 0x01
+#define DM9000_TCR 0x02
+#define DM9000_TSR1 0x03
+#define DM9000_TSR2 0x04
+#define DM9000_RCR 0x05
+#define DM9000_RSR 0x06
+#define DM9000_ROCR 0x07
+#define DM9000_BPTR 0x08
+#define DM9000_FCTR 0x09
+#define DM9000_FCR 0x0A
+#define DM9000_EPCR 0x0B
+#define DM9000_EPAR 0x0C
+#define DM9000_EPDRL 0x0D
+#define DM9000_EPDRH 0x0E
+#define DM9000_WCR 0x0F
+
+#define DM9000_PAR 0x10
+#define DM9000_MAR 0x16
+
+#define DM9000_GPCR 0x1e
+#define DM9000_GPR 0x1f
+#define DM9000_TRPAL 0x22
+#define DM9000_TRPAH 0x23
+#define DM9000_RWPAL 0x24
+#define DM9000_RWPAH 0x25
+
+#define DM9000_VIDL 0x28
+#define DM9000_VIDH 0x29
+#define DM9000_PIDL 0x2A
+#define DM9000_PIDH 0x2B
+
+#define DM9000_CHIPR 0x2C
+#define DM9000_SMCR 0x2F
+
+#define DM9000_MRCMDX 0xF0
+#define DM9000_MRCMD 0xF2
+#define DM9000_MRRL 0xF4
+#define DM9000_MRRH 0xF5
+#define DM9000_MWCMDX 0xF6
+#define DM9000_MWCMD 0xF8
+#define DM9000_MWRL 0xFA
+#define DM9000_MWRH 0xFB
+#define DM9000_TXPLL 0xFC
+#define DM9000_TXPLH 0xFD
+#define DM9000_ISR 0xFE
+#define DM9000_IMR 0xFF
+
+#define NCR_EXT_PHY (1<<7)
+#define NCR_WAKEEN (1<<6)
+#define NCR_FCOL (1<<4)
+#define NCR_FDX (1<<3)
+#define NCR_LBK (3<<1)
+#define NCR_RST (1<<0)
+
+#define NSR_SPEED (1<<7)
+#define NSR_LINKST (1<<6)
+#define NSR_WAKEST (1<<5)
+#define NSR_TX2END (1<<3)
+#define NSR_TX1END (1<<2)
+#define NSR_RXOV (1<<1)
+
+#define TCR_TJDIS (1<<6)
+#define TCR_EXCECM (1<<5)
+#define TCR_PAD_DIS2 (1<<4)
+#define TCR_CRC_DIS2 (1<<3)
+#define TCR_PAD_DIS1 (1<<2)
+#define TCR_CRC_DIS1 (1<<1)
+#define TCR_TXREQ (1<<0)
+
+#define TSR_TJTO (1<<7)
+#define TSR_LC (1<<6)
+#define TSR_NC (1<<5)
+#define TSR_LCOL (1<<4)
+#define TSR_COL (1<<3)
+#define TSR_EC (1<<2)
+
+#define RCR_WTDIS (1<<6)
+#define RCR_DIS_LONG (1<<5)
+#define RCR_DIS_CRC (1<<4)
+#define RCR_ALL (1<<3)
+#define RCR_RUNT (1<<2)
+#define RCR_PRMSC (1<<1)
+#define RCR_RXEN (1<<0)
+
+#define RSR_RF (1<<7)
+#define RSR_MF (1<<6)
+#define RSR_LCS (1<<5)
+#define RSR_RWTO (1<<4)
+#define RSR_PLE (1<<3)
+#define RSR_AE (1<<2)
+#define RSR_CE (1<<1)
+#define RSR_FOE (1<<0)
+
+#define FCTR_HWOT(ot) (( ot & 0xf ) << 4 )
+#define FCTR_LWOT(ot) ( ot & 0xf )
+
+#define IMR_PAR (1<<7)
+#define IMR_ROOM (1<<3)
+#define IMR_ROM (1<<2)
+#define IMR_PTM (1<<1)
+#define IMR_PRM (1<<0)
+
+#define ISR_ROOS (1<<3)
+#define ISR_ROS (1<<2)
+#define ISR_PTS (1<<1)
+#define ISR_PRS (1<<0)
+#define ISR_CLR_STATUS (ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS)
+
+#define EPCR_REEP (1<<5)
+#define EPCR_WEP (1<<4)
+#define EPCR_EPOS (1<<3)
+#define EPCR_ERPRR (1<<2)
+#define EPCR_ERPRW (1<<1)
+#define EPCR_ERRE (1<<0)
+
+#define GPCR_GEP_CNTL (1<<0)
+
+#define DM9000_PKT_RDY 0x01 /* Packet ready to receive */
+#define DM9000_PKT_MAX 1536 /* Received packet max size */
+
+#endif /* _DM9000X_H_ */
+
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 1b68dd5..4a47df5 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -155,9 +155,9 @@
#define DRV_NAME "e100"
#define DRV_EXT "-NAPI"
-#define DRV_VERSION "3.3.6-k2"DRV_EXT
+#define DRV_VERSION "3.4.8-k2"DRV_EXT
#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
-#define DRV_COPYRIGHT "Copyright(c) 1999-2004 Intel Corporation"
+#define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation"
#define PFX DRV_NAME ": "
#define E100_WATCHDOG_PERIOD (2 * HZ)
@@ -210,11 +210,17 @@
INTEL_8255X_ETHERNET_DEVICE(0x1069, 6),
INTEL_8255X_ETHERNET_DEVICE(0x106A, 6),
INTEL_8255X_ETHERNET_DEVICE(0x106B, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1091, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1092, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1093, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1094, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1095, 7),
INTEL_8255X_ETHERNET_DEVICE(0x1209, 0),
INTEL_8255X_ETHERNET_DEVICE(0x1229, 0),
INTEL_8255X_ETHERNET_DEVICE(0x2449, 2),
INTEL_8255X_ETHERNET_DEVICE(0x2459, 2),
INTEL_8255X_ETHERNET_DEVICE(0x245D, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7),
{ 0, }
};
MODULE_DEVICE_TABLE(pci, e100_id_table);
@@ -269,6 +275,12 @@
rus_mask = 0x3C,
};
+enum ru_state {
+ RU_SUSPENDED = 0,
+ RU_RUNNING = 1,
+ RU_UNINITIALIZED = -1,
+};
+
enum scb_stat_ack {
stat_ack_not_ours = 0x00,
stat_ack_sw_gen = 0x04,
@@ -510,7 +522,7 @@
struct rx *rx_to_use;
struct rx *rx_to_clean;
struct rfd blank_rfd;
- int ru_running;
+ enum ru_state ru_running;
spinlock_t cb_lock ____cacheline_aligned;
spinlock_t cmd_lock;
@@ -539,6 +551,7 @@
struct timer_list watchdog;
struct timer_list blink_timer;
struct mii_if_info mii;
+ struct work_struct tx_timeout_task;
enum loopback loopback;
struct mem *mem;
@@ -770,7 +783,7 @@
return 0;
}
-#define E100_WAIT_SCB_TIMEOUT 40
+#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
{
unsigned long flags;
@@ -840,6 +853,10 @@
* because the controller is too busy, so
* let's just queue the command and try again
* when another command is scheduled. */
+ if(err == -ENOSPC) {
+ //request a reset
+ schedule_work(&nic->tx_timeout_task);
+ }
break;
} else {
nic->cuc_cmd = cuc_resume;
@@ -884,7 +901,7 @@
static void e100_get_defaults(struct nic *nic)
{
- struct param_range rfds = { .min = 64, .max = 256, .count = 64 };
+ struct param_range rfds = { .min = 16, .max = 256, .count = 64 };
struct param_range cbs = { .min = 64, .max = 256, .count = 64 };
pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
@@ -899,8 +916,9 @@
/* Quadwords to DMA into FIFO before starting frame transmit */
nic->tx_threshold = 0xE0;
- nic->tx_command = cpu_to_le16(cb_tx | cb_i | cb_tx_sf |
- ((nic->mac >= mac_82558_D101_A4) ? cb_cid : 0));
+ /* no interrupt for every tx completion, delay = 256us if not 557*/
+ nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf |
+ ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i));
/* Template for a freshly allocated RFD */
nic->blank_rfd.command = cpu_to_le16(cb_el);
@@ -964,7 +982,8 @@
if(nic->flags & multicast_all)
config->multicast_all = 0x1; /* 1=accept, 0=no */
- if(!(nic->flags & wol_magic))
+ /* disable WoL when up */
+ if(netif_running(nic->netdev) || !(nic->flags & wol_magic))
config->magic_packet_disable = 0x1; /* 1=off, 0=on */
if(nic->mac >= mac_82558_D101_A4) {
@@ -1203,7 +1222,9 @@
}
}
- e100_exec_cmd(nic, cuc_dump_reset, 0);
+
+ if(e100_exec_cmd(nic, cuc_dump_reset, 0))
+ DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n");
}
static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex)
@@ -1279,12 +1300,15 @@
struct sk_buff *skb)
{
cb->command = nic->tx_command;
+ /* interrupt every 16 packets regardless of delay */
+ if((nic->cbs_avail & ~15) == nic->cbs_avail) cb->command |= cb_i;
cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd);
cb->u.tcb.tcb_byte_count = 0;
cb->u.tcb.threshold = nic->tx_threshold;
cb->u.tcb.tbd_count = 1;
cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
skb->data, skb->len, PCI_DMA_TODEVICE));
+ // check for mapping failure?
cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
}
@@ -1297,7 +1321,8 @@
/* SW workaround for ICH[x] 10Mbps/half duplex Tx hang.
Issue a NOP command followed by a 1us delay before
issuing the Tx command. */
- e100_exec_cmd(nic, cuc_nop, 0);
+ if(e100_exec_cmd(nic, cuc_nop, 0))
+ DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n");
udelay(1);
}
@@ -1415,12 +1440,18 @@
return 0;
}
-static inline void e100_start_receiver(struct nic *nic)
+static inline void e100_start_receiver(struct nic *nic, struct rx *rx)
{
+ if(!nic->rxs) return;
+ if(RU_SUSPENDED != nic->ru_running) return;
+
+ /* handle init time starts */
+ if(!rx) rx = nic->rxs;
+
/* (Re)start RU if suspended or idle and RFA is non-NULL */
- if(!nic->ru_running && nic->rx_to_clean->skb) {
- e100_exec_cmd(nic, ruc_start, nic->rx_to_clean->dma_addr);
- nic->ru_running = 1;
+ if(rx->skb) {
+ e100_exec_cmd(nic, ruc_start, rx->dma_addr);
+ nic->ru_running = RU_RUNNING;
}
}
@@ -1437,6 +1468,13 @@
rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+ if(pci_dma_mapping_error(rx->dma_addr)) {
+ dev_kfree_skb_any(rx->skb);
+ rx->skb = 0;
+ rx->dma_addr = 0;
+ return -ENOMEM;
+ }
+
/* Link the RFD to end of RFA by linking previous RFD to
* this one, and clearing EL bit of previous. */
if(rx->prev->skb) {
@@ -1471,7 +1509,7 @@
/* If data isn't ready, nothing to indicate */
if(unlikely(!(rfd_status & cb_complete)))
- return -EAGAIN;
+ return -ENODATA;
/* Get actual data size */
actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF;
@@ -1482,6 +1520,10 @@
pci_unmap_single(nic->pdev, rx->dma_addr,
RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+ /* this allows for a fast restart without re-enabling interrupts */
+ if(le16_to_cpu(rfd->command) & cb_el)
+ nic->ru_running = RU_SUSPENDED;
+
/* Pull off the RFD and put the actual data (minus eth hdr) */
skb_reserve(skb, sizeof(struct rfd));
skb_put(skb, actual_size);
@@ -1514,20 +1556,45 @@
unsigned int work_to_do)
{
struct rx *rx;
+ int restart_required = 0;
+ struct rx *rx_to_start = NULL;
+
+ /* are we already rnr? then pay attention!!! this ensures that
+ * the state machine progression never allows a start with a
+ * partially cleaned list, avoiding a race between hardware
+ * and rx_to_clean when in NAPI mode */
+ if(RU_SUSPENDED == nic->ru_running)
+ restart_required = 1;
/* Indicate newly arrived packets */
for(rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) {
- if(e100_rx_indicate(nic, rx, work_done, work_to_do))
+ int err = e100_rx_indicate(nic, rx, work_done, work_to_do);
+ if(-EAGAIN == err) {
+ /* hit quota so have more work to do, restart once
+ * cleanup is complete */
+ restart_required = 0;
+ break;
+ } else if(-ENODATA == err)
break; /* No more to clean */
}
+ /* save our starting point as the place we'll restart the receiver */
+ if(restart_required)
+ rx_to_start = nic->rx_to_clean;
+
/* Alloc new skbs to refill list */
for(rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) {
if(unlikely(e100_rx_alloc_skb(nic, rx)))
break; /* Better luck next time (see watchdog) */
}
- e100_start_receiver(nic);
+ if(restart_required) {
+ // ack the rnr?
+ writeb(stat_ack_rnr, &nic->csr->scb.stat_ack);
+ e100_start_receiver(nic, rx_to_start);
+ if(work_done)
+ (*work_done)++;
+ }
}
static void e100_rx_clean_list(struct nic *nic)
@@ -1535,6 +1602,8 @@
struct rx *rx;
unsigned int i, count = nic->params.rfds.count;
+ nic->ru_running = RU_UNINITIALIZED;
+
if(nic->rxs) {
for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
if(rx->skb) {
@@ -1548,7 +1617,6 @@
}
nic->rx_to_use = nic->rx_to_clean = NULL;
- nic->ru_running = 0;
}
static int e100_rx_alloc_list(struct nic *nic)
@@ -1557,6 +1625,7 @@
unsigned int i, count = nic->params.rfds.count;
nic->rx_to_use = nic->rx_to_clean = NULL;
+ nic->ru_running = RU_UNINITIALIZED;
if(!(nic->rxs = kmalloc(sizeof(struct rx) * count, GFP_ATOMIC)))
return -ENOMEM;
@@ -1572,6 +1641,7 @@
}
nic->rx_to_use = nic->rx_to_clean = nic->rxs;
+ nic->ru_running = RU_SUSPENDED;
return 0;
}
@@ -1593,7 +1663,7 @@
/* We hit Receive No Resource (RNR); restart RU after cleaning */
if(stat_ack & stat_ack_rnr)
- nic->ru_running = 0;
+ nic->ru_running = RU_SUSPENDED;
e100_disable_irq(nic);
netif_rx_schedule(netdev);
@@ -1663,6 +1733,7 @@
return 0;
}
+#ifdef CONFIG_PM
static int e100_asf(struct nic *nic)
{
/* ASF can be enabled from eeprom */
@@ -1671,6 +1742,7 @@
!(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE));
}
+#endif
static int e100_up(struct nic *nic)
{
@@ -1683,13 +1755,16 @@
if((err = e100_hw_init(nic)))
goto err_clean_cbs;
e100_set_multicast_list(nic->netdev);
- e100_start_receiver(nic);
+ e100_start_receiver(nic, 0);
mod_timer(&nic->watchdog, jiffies);
if((err = request_irq(nic->pdev->irq, e100_intr, SA_SHIRQ,
nic->netdev->name, nic->netdev)))
goto err_no_irq;
- e100_enable_irq(nic);
netif_wake_queue(nic->netdev);
+ netif_poll_enable(nic->netdev);
+ /* enable ints _after_ enabling poll, preventing a race between
+ * disable ints+schedule */
+ e100_enable_irq(nic);
return 0;
err_no_irq:
@@ -1703,11 +1778,13 @@
static void e100_down(struct nic *nic)
{
+ /* wait here for poll to complete */
+ netif_poll_disable(nic->netdev);
+ netif_stop_queue(nic->netdev);
e100_hw_reset(nic);
free_irq(nic->pdev->irq, nic->netdev);
del_timer_sync(&nic->watchdog);
netif_carrier_off(nic->netdev);
- netif_stop_queue(nic->netdev);
e100_clean_cbs(nic);
e100_rx_clean_list(nic);
}
@@ -1716,6 +1793,15 @@
{
struct nic *nic = netdev_priv(netdev);
+ /* Reset outside of interrupt context, to avoid request_irq
+ * in interrupt context */
+ schedule_work(&nic->tx_timeout_task);
+}
+
+static void e100_tx_timeout_task(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
readb(&nic->csr->scb.status));
e100_down(netdev_priv(netdev));
@@ -1749,7 +1835,7 @@
mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR,
BMCR_LOOPBACK);
- e100_start_receiver(nic);
+ e100_start_receiver(nic, 0);
if(!(skb = dev_alloc_skb(ETH_DATA_LEN))) {
err = -ENOMEM;
@@ -1869,7 +1955,6 @@
else
nic->flags &= ~wol_magic;
- pci_enable_wake(nic->pdev, 0, nic->flags & (wol_magic | e100_asf(nic)));
e100_exec_cb(nic, NULL, e100_configure);
return 0;
@@ -2223,6 +2308,7 @@
e100_get_defaults(nic);
+ /* locks must be initialized before calling hw_reset */
spin_lock_init(&nic->cb_lock);
spin_lock_init(&nic->cmd_lock);
@@ -2240,6 +2326,9 @@
nic->blink_timer.function = e100_blink_led;
nic->blink_timer.data = (unsigned long)nic;
+ INIT_WORK(&nic->tx_timeout_task,
+ (void (*)(void *))e100_tx_timeout_task, netdev);
+
if((err = e100_alloc(nic))) {
DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n");
goto err_out_iounmap;
@@ -2263,7 +2352,8 @@
(nic->eeprom[eeprom_id] & eeprom_id_wol))
nic->flags |= wol_magic;
- pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic)));
+ /* ack any pending wake events, disable PME */
+ pci_enable_wake(pdev, 0, 0);
strcpy(netdev->name, "eth%d");
if((err = register_netdev(netdev))) {
@@ -2335,7 +2425,10 @@
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
- e100_hw_init(nic);
+ /* ack any pending wake events, disable PME */
+ pci_enable_wake(pdev, 0, 0);
+ if(e100_hw_init(nic))
+ DPRINTK(HW, ERR, "e100_hw_init failed\n");
netif_device_attach(netdev);
if(netif_running(netdev))
@@ -2345,6 +2438,21 @@
}
#endif
+
+static void e100_shutdown(struct device *dev)
+{
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+#ifdef CONFIG_PM
+ pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic)));
+#else
+ pci_enable_wake(pdev, 0, nic->flags & (wol_magic));
+#endif
+}
+
+
static struct pci_driver e100_driver = {
.name = DRV_NAME,
.id_table = e100_id_table,
@@ -2354,6 +2462,11 @@
.suspend = e100_suspend,
.resume = e100_resume,
#endif
+
+ .driver = {
+ .shutdown = e100_shutdown,
+ }
+
};
static int __init e100_init_module(void)
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 148930d..af1e82c 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -1,7 +1,7 @@
/*******************************************************************************
- Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
+ Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
@@ -112,6 +112,8 @@
#define E1000_MAX_82544_RXD 4096
/* Supported Rx Buffer Sizes */
+#define E1000_RXBUFFER_128 128 /* Used for packet split */
+#define E1000_RXBUFFER_256 256 /* Used for packet split */
#define E1000_RXBUFFER_2048 2048
#define E1000_RXBUFFER_4096 4096
#define E1000_RXBUFFER_8192 8192
@@ -137,15 +139,19 @@
/* How many Rx Buffers do we bundle into one write to the hardware ? */
#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
-#define AUTO_ALL_MODES 0
-#define E1000_EEPROM_82544_APM 0x0004
-#define E1000_EEPROM_APME 0x0400
+#define AUTO_ALL_MODES 0
+#define E1000_EEPROM_82544_APM 0x0400
+#define E1000_EEPROM_APME 0x0400
#ifndef E1000_MASTER_SLAVE
/* Switch to override PHY master/slave setting */
#define E1000_MASTER_SLAVE e1000_ms_hw_default
#endif
+#define E1000_MNG_VLAN_NONE -1
+/* Number of packet split data buffers (not including the header buffer) */
+#define PS_PAGE_BUFFERS MAX_PS_BUFFERS-1
+
/* only works for sizes that are powers of 2 */
#define E1000_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1)))
@@ -159,6 +165,9 @@
uint16_t next_to_watch;
};
+struct e1000_ps_page { struct page *ps_page[MAX_PS_BUFFERS]; };
+struct e1000_ps_page_dma { uint64_t ps_page_dma[MAX_PS_BUFFERS]; };
+
struct e1000_desc_ring {
/* pointer to the descriptor ring memory */
void *desc;
@@ -174,12 +183,19 @@
unsigned int next_to_clean;
/* array of buffer information structs */
struct e1000_buffer *buffer_info;
+ /* arrays of page information for packet split */
+ struct e1000_ps_page *ps_page;
+ struct e1000_ps_page_dma *ps_page_dma;
};
#define E1000_DESC_UNUSED(R) \
((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
(R)->next_to_clean - (R)->next_to_use - 1)
+#define E1000_RX_DESC_PS(R, i) \
+ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
+#define E1000_RX_DESC_EXT(R, i) \
+ (&(((union e1000_rx_desc_extended *)((R).desc))[i]))
#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
@@ -192,6 +208,7 @@
struct timer_list watchdog_timer;
struct timer_list phy_info_timer;
struct vlan_group *vlgrp;
+ uint16_t mng_vlan_id;
uint32_t bd_number;
uint32_t rx_buffer_len;
uint32_t part_num;
@@ -228,14 +245,23 @@
boolean_t detect_tx_hung;
/* RX */
+#ifdef CONFIG_E1000_NAPI
+ boolean_t (*clean_rx) (struct e1000_adapter *adapter, int *work_done,
+ int work_to_do);
+#else
+ boolean_t (*clean_rx) (struct e1000_adapter *adapter);
+#endif
+ void (*alloc_rx_buf) (struct e1000_adapter *adapter);
struct e1000_desc_ring rx_ring;
uint64_t hw_csum_err;
uint64_t hw_csum_good;
uint32_t rx_int_delay;
uint32_t rx_abs_int_delay;
boolean_t rx_csum;
+ boolean_t rx_ps;
uint32_t gorcl;
uint64_t gorcl_old;
+ uint16_t rx_ps_bsize0;
/* Interrupt Throttle Rate */
uint32_t itr;
@@ -257,5 +283,8 @@
int msg_enable;
+#ifdef CONFIG_PCI_MSI
+ boolean_t have_msi;
+#endif
};
#endif /* _E1000_H_ */
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 0a2ca7c..237247f 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -1,7 +1,7 @@
/*******************************************************************************
- Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
+ Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
@@ -69,6 +69,7 @@
{ "rx_crc_errors", E1000_STAT(net_stats.rx_crc_errors) },
{ "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
{ "rx_fifo_errors", E1000_STAT(net_stats.rx_fifo_errors) },
+ { "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
{ "rx_missed_errors", E1000_STAT(net_stats.rx_missed_errors) },
{ "tx_aborted_errors", E1000_STAT(net_stats.tx_aborted_errors) },
{ "tx_carrier_errors", E1000_STAT(net_stats.tx_carrier_errors) },
@@ -593,7 +594,7 @@
tx_old = adapter->tx_ring;
rx_old = adapter->rx_ring;
- if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ if((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
return -EINVAL;
if(netif_running(adapter->netdev))
@@ -784,8 +785,8 @@
/* Hook up test interrupt handler just for this test */
if(!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) {
shared_int = FALSE;
- } else if(request_irq(irq, &e1000_test_intr, SA_SHIRQ,
- netdev->name, netdev)){
+ } else if(request_irq(irq, &e1000_test_intr, SA_SHIRQ,
+ netdev->name, netdev)){
*data = 1;
return -1;
}
@@ -842,10 +843,8 @@
* test failed.
*/
adapter->test_icr = 0;
- E1000_WRITE_REG(&adapter->hw, IMC,
- (~mask & 0x00007FFF));
- E1000_WRITE_REG(&adapter->hw, ICS,
- (~mask & 0x00007FFF));
+ E1000_WRITE_REG(&adapter->hw, IMC, ~mask & 0x00007FFF);
+ E1000_WRITE_REG(&adapter->hw, ICS, ~mask & 0x00007FFF);
msec_delay(10);
if(adapter->test_icr) {
@@ -919,7 +918,8 @@
/* Setup Tx descriptor ring and Tx buffers */
- txdr->count = 80;
+ if(!txdr->count)
+ txdr->count = E1000_DEFAULT_TXD;
size = txdr->count * sizeof(struct e1000_buffer);
if(!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
@@ -974,7 +974,8 @@
/* Setup Rx descriptor ring and Rx buffers */
- rxdr->count = 80;
+ if(!rxdr->count)
+ rxdr->count = E1000_DEFAULT_RXD;
size = rxdr->count * sizeof(struct e1000_buffer);
if(!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
@@ -1008,7 +1009,7 @@
struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
struct sk_buff *skb;
- if(!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN,
+ if(!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN,
GFP_KERNEL))) {
ret_val = 6;
goto err_nomem;
@@ -1310,31 +1311,62 @@
struct e1000_desc_ring *txdr = &adapter->test_tx_ring;
struct e1000_desc_ring *rxdr = &adapter->test_rx_ring;
struct pci_dev *pdev = adapter->pdev;
- int i, ret_val;
+ int i, j, k, l, lc, good_cnt, ret_val=0;
+ unsigned long time;
E1000_WRITE_REG(&adapter->hw, RDT, rxdr->count - 1);
- for(i = 0; i < 64; i++) {
- e1000_create_lbtest_frame(txdr->buffer_info[i].skb, 1024);
- pci_dma_sync_single_for_device(pdev, txdr->buffer_info[i].dma,
- txdr->buffer_info[i].length,
- PCI_DMA_TODEVICE);
- }
- E1000_WRITE_REG(&adapter->hw, TDT, i);
+ /* Calculate the loop count based on the largest descriptor ring
+ * The idea is to wrap the largest ring a number of times using 64
+ * send/receive pairs during each loop
+ */
- msec_delay(200);
+ if(rxdr->count <= txdr->count)
+ lc = ((txdr->count / 64) * 2) + 1;
+ else
+ lc = ((rxdr->count / 64) * 2) + 1;
- i = 0;
- do {
- pci_dma_sync_single_for_cpu(pdev, rxdr->buffer_info[i].dma,
- rxdr->buffer_info[i].length,
- PCI_DMA_FROMDEVICE);
-
- ret_val = e1000_check_lbtest_frame(rxdr->buffer_info[i].skb,
- 1024);
- i++;
- } while (ret_val != 0 && i < 64);
-
+ k = l = 0;
+ for(j = 0; j <= lc; j++) { /* loop count loop */
+ for(i = 0; i < 64; i++) { /* send the packets */
+ e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
+ 1024);
+ pci_dma_sync_single_for_device(pdev,
+ txdr->buffer_info[k].dma,
+ txdr->buffer_info[k].length,
+ PCI_DMA_TODEVICE);
+ if(unlikely(++k == txdr->count)) k = 0;
+ }
+ E1000_WRITE_REG(&adapter->hw, TDT, k);
+ msec_delay(200);
+ time = jiffies; /* set the start time for the receive */
+ good_cnt = 0;
+ do { /* receive the sent packets */
+ pci_dma_sync_single_for_cpu(pdev,
+ rxdr->buffer_info[l].dma,
+ rxdr->buffer_info[l].length,
+ PCI_DMA_FROMDEVICE);
+
+ ret_val = e1000_check_lbtest_frame(
+ rxdr->buffer_info[l].skb,
+ 1024);
+ if(!ret_val)
+ good_cnt++;
+ if(unlikely(++l == rxdr->count)) l = 0;
+ /* time + 20 msecs (200 msecs on 2.4) is more than
+ * enough time to complete the receives, if it's
+ * exceeded, break and error off
+ */
+ } while (good_cnt < 64 && jiffies < (time + 20));
+ if(good_cnt != 64) {
+ ret_val = 13; /* ret_val is the same as mis-compare */
+ break;
+ }
+ if(jiffies >= (time + 2)) {
+ ret_val = 14; /* error code for time out error */
+ break;
+ }
+ } /* end loop count loop */
return ret_val;
}
@@ -1354,13 +1386,12 @@
e1000_link_test(struct e1000_adapter *adapter, uint64_t *data)
{
*data = 0;
-
if (adapter->hw.media_type == e1000_media_type_internal_serdes) {
int i = 0;
adapter->hw.serdes_link_down = TRUE;
- /* on some blade server designs link establishment */
- /* could take as long as 2-3 minutes. */
+ /* On some blade server designs, link establishment
+ * could take as long as 2-3 minutes */
do {
e1000_check_for_link(&adapter->hw);
if (adapter->hw.serdes_link_down == FALSE)
@@ -1368,9 +1399,11 @@
msec_delay(20);
} while (i++ < 3750);
- *data = 1;
+ *data = 1;
} else {
e1000_check_for_link(&adapter->hw);
+ if(adapter->hw.autoneg) /* if auto_neg is set wait for it */
+ msec_delay(4000);
if(!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) {
*data = 1;
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 786a9b9..723589b 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -1,7 +1,7 @@
/*******************************************************************************
- Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
+ Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
@@ -63,10 +63,11 @@
static int32_t e1000_acquire_eeprom(struct e1000_hw *hw);
static void e1000_release_eeprom(struct e1000_hw *hw);
static void e1000_standby_eeprom(struct e1000_hw *hw);
-static int32_t e1000_id_led_init(struct e1000_hw * hw);
static int32_t e1000_set_vco_speed(struct e1000_hw *hw);
static int32_t e1000_polarity_reversal_workaround(struct e1000_hw *hw);
static int32_t e1000_set_phy_mode(struct e1000_hw *hw);
+static int32_t e1000_host_if_read_cookie(struct e1000_hw *hw, uint8_t *buffer);
+static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length);
/* IGP cable length table */
static const
@@ -80,6 +81,17 @@
100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110,
110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120};
+static const
+uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
+ { 8, 13, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43,
+ 22, 24, 27, 30, 32, 35, 37, 40, 42, 44, 47, 49, 51, 54, 56, 58,
+ 32, 35, 38, 41, 44, 47, 50, 53, 55, 58, 61, 63, 66, 69, 71, 74,
+ 43, 47, 51, 54, 58, 61, 64, 67, 71, 74, 77, 80, 82, 85, 88, 90,
+ 57, 62, 66, 70, 74, 77, 81, 85, 88, 91, 94, 97, 100, 103, 106, 108,
+ 73, 78, 82, 87, 91, 95, 98, 102, 105, 109, 112, 114, 117, 119, 122, 124,
+ 91, 96, 101, 105, 109, 113, 116, 119, 122, 125, 127, 128, 128, 128, 128, 128,
+ 108, 113, 117, 121, 124, 127, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128};
+
/******************************************************************************
* Set the phy type member in the hw struct.
@@ -91,10 +103,14 @@
{
DEBUGFUNC("e1000_set_phy_type");
+ if(hw->mac_type == e1000_undefined)
+ return -E1000_ERR_PHY_TYPE;
+
switch(hw->phy_id) {
case M88E1000_E_PHY_ID:
case M88E1000_I_PHY_ID:
case M88E1011_I_PHY_ID:
+ case M88E1111_I_PHY_ID:
hw->phy_type = e1000_phy_m88;
break;
case IGP01E1000_I_PHY_ID:
@@ -128,7 +144,6 @@
DEBUGFUNC("e1000_phy_init_script");
-
if(hw->phy_init_script) {
msec_delay(20);
@@ -271,6 +286,7 @@
case E1000_DEV_ID_82546GB_FIBER:
case E1000_DEV_ID_82546GB_SERDES:
case E1000_DEV_ID_82546GB_PCIE:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
hw->mac_type = e1000_82546_rev_3;
break;
case E1000_DEV_ID_82541EI:
@@ -289,12 +305,19 @@
case E1000_DEV_ID_82547GI:
hw->mac_type = e1000_82547_rev_2;
break;
+ case E1000_DEV_ID_82573E:
+ case E1000_DEV_ID_82573E_IAMT:
+ hw->mac_type = e1000_82573;
+ break;
default:
/* Should never have loaded on this device */
return -E1000_ERR_MAC_TYPE;
}
switch(hw->mac_type) {
+ case e1000_82573:
+ hw->eeprom_semaphore_present = TRUE;
+ /* fall through */
case e1000_82541:
case e1000_82547:
case e1000_82541_rev_2:
@@ -360,6 +383,9 @@
uint32_t icr;
uint32_t manc;
uint32_t led_ctrl;
+ uint32_t timeout;
+ uint32_t extcnf_ctrl;
+ int32_t ret_val;
DEBUGFUNC("e1000_reset_hw");
@@ -369,6 +395,15 @@
e1000_pci_clear_mwi(hw);
}
+ if(hw->bus_type == e1000_bus_type_pci_express) {
+ /* Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ if(e1000_disable_pciex_master(hw) != E1000_SUCCESS) {
+ DEBUGOUT("PCI-E Master disable polling has failed.\n");
+ }
+ }
+
/* Clear interrupt mask to stop board from generating interrupts */
DEBUGOUT("Masking off all interrupts\n");
E1000_WRITE_REG(hw, IMC, 0xffffffff);
@@ -393,10 +428,32 @@
/* Must reset the PHY before resetting the MAC */
if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
- E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST));
+ E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST));
msec_delay(5);
}
+ /* Must acquire the MDIO ownership before MAC reset.
+ * Ownership defaults to firmware after a reset. */
+ if(hw->mac_type == e1000_82573) {
+ timeout = 10;
+
+ extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+
+ do {
+ E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl);
+ extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+
+ if(extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
+ break;
+ else
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+
+ msec_delay(2);
+ timeout--;
+ } while(timeout);
+ }
+
/* Issue a global reset to the MAC. This will reset the chip's
* transmit, receive, DMA, and link units. It will not effect
* the current PCI configuration. The global reset bit is self-
@@ -450,6 +507,18 @@
/* Wait for EEPROM reload */
msec_delay(20);
break;
+ case e1000_82573:
+ udelay(10);
+ ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH(hw);
+ /* fall through */
+ ret_val = e1000_get_auto_rd_done(hw);
+ if(ret_val)
+ /* We don't want to continue accessing MAC registers. */
+ return ret_val;
+ break;
default:
/* Wait for EEPROM reload (it happens automatically) */
msec_delay(5);
@@ -457,7 +526,7 @@
}
/* Disable HW ARPs on ASF enabled adapters */
- if(hw->mac_type >= e1000_82540) {
+ if(hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) {
manc = E1000_READ_REG(hw, MANC);
manc &= ~(E1000_MANC_ARP_EN);
E1000_WRITE_REG(hw, MANC, manc);
@@ -510,6 +579,8 @@
uint16_t pcix_stat_hi_word;
uint16_t cmd_mmrbc;
uint16_t stat_mmrbc;
+ uint32_t mta_size;
+
DEBUGFUNC("e1000_init_hw");
/* Initialize Identification LED */
@@ -524,8 +595,8 @@
/* Disabling VLAN filtering. */
DEBUGOUT("Initializing the IEEE VLAN\n");
- E1000_WRITE_REG(hw, VET, 0);
-
+ if (hw->mac_type < e1000_82545_rev_3)
+ E1000_WRITE_REG(hw, VET, 0);
e1000_clear_vfta(hw);
/* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
@@ -553,14 +624,16 @@
/* Zero out the Multicast HASH table */
DEBUGOUT("Zeroing the MTA\n");
- for(i = 0; i < E1000_MC_TBL_SIZE; i++)
+ mta_size = E1000_MC_TBL_SIZE;
+ for(i = 0; i < mta_size; i++)
E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
/* Set the PCI priority bit correctly in the CTRL register. This
* determines if the adapter gives priority to receives, or if it
- * gives equal priority to transmits and receives.
+ * gives equal priority to transmits and receives. Valid only on
+ * 82542 and 82543 silicon.
*/
- if(hw->dma_fairness) {
+ if(hw->dma_fairness && hw->mac_type <= e1000_82543) {
ctrl = E1000_READ_REG(hw, CTRL);
E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PRIOR);
}
@@ -598,9 +671,21 @@
if(hw->mac_type > e1000_82544) {
ctrl = E1000_READ_REG(hw, TXDCTL);
ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82573:
+ ctrl |= E1000_TXDCTL_COUNT_DESC;
+ break;
+ }
E1000_WRITE_REG(hw, TXDCTL, ctrl);
}
+ if (hw->mac_type == e1000_82573) {
+ e1000_enable_tx_pkt_filtering(hw);
+ }
+
+
/* Clear all of the statistics registers (clear on read). It is
* important that we do this after we have tried to establish link
* because the symbol error count will increment wildly if there
@@ -679,7 +764,7 @@
* control setting, then the variable hw->fc will
* be initialized based on a value in the EEPROM.
*/
- if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data) < 0) {
+ if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data)) {
DEBUGOUT("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
@@ -736,6 +821,7 @@
E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW);
E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH);
E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE);
+
E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time);
/* Set the flow control receive threshold registers. Normally,
@@ -906,20 +992,18 @@
}
/******************************************************************************
-* Detects which PHY is present and the speed and duplex
+* Make sure we have a valid PHY and change PHY mode before link setup.
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
static int32_t
-e1000_setup_copper_link(struct e1000_hw *hw)
+e1000_copper_link_preconfig(struct e1000_hw *hw)
{
uint32_t ctrl;
- uint32_t led_ctrl;
int32_t ret_val;
- uint16_t i;
uint16_t phy_data;
- DEBUGFUNC("e1000_setup_copper_link");
+ DEBUGFUNC("e1000_copper_link_preconfig");
ctrl = E1000_READ_REG(hw, CTRL);
/* With 82543, we need to force speed and duplex on the MAC equal to what
@@ -933,7 +1017,9 @@
} else {
ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
E1000_WRITE_REG(hw, CTRL, ctrl);
- e1000_phy_hw_reset(hw);
+ ret_val = e1000_phy_hw_reset(hw);
+ if(ret_val)
+ return ret_val;
}
/* Make sure we have a valid PHY */
@@ -961,274 +1047,398 @@
hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2)
hw->phy_reset_disable = FALSE;
- if(!hw->phy_reset_disable) {
- if (hw->phy_type == e1000_phy_igp) {
+ return E1000_SUCCESS;
+}
- ret_val = e1000_phy_reset(hw);
- if(ret_val) {
- DEBUGOUT("Error Resetting the PHY\n");
- return ret_val;
- }
- /* Wait 10ms for MAC to configure PHY from eeprom settings */
- msec_delay(15);
+/********************************************************************
+* Copper link setup for e1000_phy_igp series.
+*
+* hw - Struct containing variables accessed by shared code
+*********************************************************************/
+static int32_t
+e1000_copper_link_igp_setup(struct e1000_hw *hw)
+{
+ uint32_t led_ctrl;
+ int32_t ret_val;
+ uint16_t phy_data;
- /* Configure activity LED after PHY reset */
- led_ctrl = E1000_READ_REG(hw, LEDCTL);
- led_ctrl &= IGP_ACTIVITY_LED_MASK;
- led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
- E1000_WRITE_REG(hw, LEDCTL, led_ctrl);
+ DEBUGFUNC("e1000_copper_link_igp_setup");
- /* disable lplu d3 during driver init */
- ret_val = e1000_set_d3_lplu_state(hw, FALSE);
- if(ret_val) {
- DEBUGOUT("Error Disabling LPLU D3\n");
- return ret_val;
- }
+ if (hw->phy_reset_disable)
+ return E1000_SUCCESS;
+
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
- /* Configure mdi-mdix settings */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL,
- &phy_data);
+ /* Wait 10ms for MAC to configure PHY from eeprom settings */
+ msec_delay(15);
+
+ /* Configure activity LED after PHY reset */
+ led_ctrl = E1000_READ_REG(hw, LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ E1000_WRITE_REG(hw, LEDCTL, led_ctrl);
+
+ /* disable lplu d3 during driver init */
+ ret_val = e1000_set_d3_lplu_state(hw, FALSE);
+ if (ret_val) {
+ DEBUGOUT("Error Disabling LPLU D3\n");
+ return ret_val;
+ }
+
+ /* disable lplu d0 during driver init */
+ ret_val = e1000_set_d0_lplu_state(hw, FALSE);
+ if (ret_val) {
+ DEBUGOUT("Error Disabling LPLU D0\n");
+ return ret_val;
+ }
+ /* Configure mdi-mdix settings */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ hw->dsp_config_state = e1000_dsp_config_disabled;
+ /* Force MDI for earlier revs of the IGP PHY */
+ phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX | IGP01E1000_PSCR_FORCE_MDI_MDIX);
+ hw->mdix = 1;
+
+ } else {
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 2:
+ phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 0:
+ default:
+ phy_data |= IGP01E1000_PSCR_AUTO_MDIX;
+ break;
+ }
+ }
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if(ret_val)
+ return ret_val;
+
+ /* set auto-master slave resolution settings */
+ if(hw->autoneg) {
+ e1000_ms_type phy_ms_setting = hw->master_slave;
+
+ if(hw->ffe_config_state == e1000_ffe_config_active)
+ hw->ffe_config_state = e1000_ffe_config_enabled;
+
+ if(hw->dsp_config_state == e1000_dsp_config_activated)
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+
+ /* when autonegotiation advertisment is only 1000Mbps then we
+ * should disable SmartSpeed and enable Auto MasterSlave
+ * resolution as hardware default. */
+ if(hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+ /* Disable SmartSpeed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
if(ret_val)
return ret_val;
-
- if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
- hw->dsp_config_state = e1000_dsp_config_disabled;
- /* Force MDI for earlier revs of the IGP PHY */
- phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX |
- IGP01E1000_PSCR_FORCE_MDI_MDIX);
- hw->mdix = 1;
-
- } else {
- hw->dsp_config_state = e1000_dsp_config_enabled;
- phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
-
- switch (hw->mdix) {
- case 1:
- phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
- break;
- case 2:
- phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
- break;
- case 0:
- default:
- phy_data |= IGP01E1000_PSCR_AUTO_MDIX;
- break;
- }
- }
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL,
- phy_data);
- if(ret_val)
- return ret_val;
-
- /* set auto-master slave resolution settings */
- if(hw->autoneg) {
- e1000_ms_type phy_ms_setting = hw->master_slave;
-
- if(hw->ffe_config_state == e1000_ffe_config_active)
- hw->ffe_config_state = e1000_ffe_config_enabled;
-
- if(hw->dsp_config_state == e1000_dsp_config_activated)
- hw->dsp_config_state = e1000_dsp_config_enabled;
-
- /* when autonegotiation advertisment is only 1000Mbps then we
- * should disable SmartSpeed and enable Auto MasterSlave
- * resolution as hardware default. */
- if(hw->autoneg_advertised == ADVERTISE_1000_FULL) {
- /* Disable SmartSpeed */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- &phy_data);
- if(ret_val)
- return ret_val;
- phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1000_write_phy_reg(hw,
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw,
IGP01E1000_PHY_PORT_CONFIG,
phy_data);
- if(ret_val)
- return ret_val;
- /* Set auto Master/Slave resolution process */
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
- if(ret_val)
- return ret_val;
- phy_data &= ~CR_1000T_MS_ENABLE;
- ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
- if(ret_val)
- return ret_val;
- }
-
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
- if(ret_val)
- return ret_val;
-
- /* load defaults for future use */
- hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ?
- ((phy_data & CR_1000T_MS_VALUE) ?
- e1000_ms_force_master :
- e1000_ms_force_slave) :
- e1000_ms_auto;
-
- switch (phy_ms_setting) {
- case e1000_ms_force_master:
- phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
- break;
- case e1000_ms_force_slave:
- phy_data |= CR_1000T_MS_ENABLE;
- phy_data &= ~(CR_1000T_MS_VALUE);
- break;
- case e1000_ms_auto:
- phy_data &= ~CR_1000T_MS_ENABLE;
- default:
- break;
- }
- ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
- if(ret_val)
- return ret_val;
- }
- } else {
- /* Enable CRS on TX. This must be set for half-duplex operation. */
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL,
- &phy_data);
if(ret_val)
return ret_val;
+ /* Set auto Master/Slave resolution process */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if(ret_val)
+ return ret_val;
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if(ret_val)
+ return ret_val;
+ }
- phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if(ret_val)
+ return ret_val;
- /* Options:
- * MDI/MDI-X = 0 (default)
- * 0 - Auto for all speeds
- * 1 - MDI mode
- * 2 - MDI-X mode
- * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
- */
- phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+ /* load defaults for future use */
+ hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ?
+ ((phy_data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) :
+ e1000_ms_auto;
- switch (hw->mdix) {
- case 1:
- phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
- break;
- case 2:
- phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
- break;
- case 3:
- phy_data |= M88E1000_PSCR_AUTO_X_1000T;
- break;
- case 0:
+ switch (phy_ms_setting) {
+ case e1000_ms_force_master:
+ phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ phy_data |= CR_1000T_MS_ENABLE;
+ phy_data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ phy_data &= ~CR_1000T_MS_ENABLE;
default:
- phy_data |= M88E1000_PSCR_AUTO_X_MODE;
- break;
- }
+ break;
+ }
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if(ret_val)
+ return ret_val;
+ }
- /* Options:
- * disable_polarity_correction = 0 (default)
- * Automatic Correction for Reversed Cable Polarity
- * 0 - Disabled
- * 1 - Enabled
- */
- phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
- if(hw->disable_polarity_correction == 1)
- phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL,
- phy_data);
- if(ret_val)
- return ret_val;
+ return E1000_SUCCESS;
+}
- /* Force TX_CLK in the Extended PHY Specific Control Register
- * to 25MHz clock.
- */
- ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- &phy_data);
- if(ret_val)
- return ret_val;
- phy_data |= M88E1000_EPSCR_TX_CLK_25;
+/********************************************************************
+* Copper link setup for e1000_phy_m88 series.
+*
+* hw - Struct containing variables accessed by shared code
+*********************************************************************/
+static int32_t
+e1000_copper_link_mgp_setup(struct e1000_hw *hw)
+{
+ int32_t ret_val;
+ uint16_t phy_data;
- if (hw->phy_revision < M88E1011_I_REV_4) {
- /* Configure Master and Slave downshift values */
- phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ DEBUGFUNC("e1000_copper_link_mgp_setup");
+
+ if(hw->phy_reset_disable)
+ return E1000_SUCCESS;
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if(ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if(hw->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if(ret_val)
+ return ret_val;
+
+ /* Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+ if(ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+ if (hw->phy_revision < M88E1011_I_REV_4) {
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
- phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
- ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- phy_data);
- if(ret_val)
- return ret_val;
- }
+ ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if(ret_val)
+ return ret_val;
+ }
- /* SW Reset the PHY so all changes take effect */
- ret_val = e1000_phy_reset(hw);
- if(ret_val) {
- DEBUGOUT("Error Resetting the PHY\n");
- return ret_val;
- }
+ /* SW Reset the PHY so all changes take effect */
+ ret_val = e1000_phy_reset(hw);
+ if(ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/********************************************************************
+* Setup auto-negotiation and flow control advertisements,
+* and then perform auto-negotiation.
+*
+* hw - Struct containing variables accessed by shared code
+*********************************************************************/
+static int32_t
+e1000_copper_link_autoneg(struct e1000_hw *hw)
+{
+ int32_t ret_val;
+ uint16_t phy_data;
+
+ DEBUGFUNC("e1000_copper_link_autoneg");
+
+ /* Perform some bounds checking on the hw->autoneg_advertised
+ * parameter. If this variable is zero, then set it to the default.
+ */
+ hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ /* If autoneg_advertised is zero, we assume it was not defaulted
+ * by the calling code so we set to advertise full capability.
+ */
+ if(hw->autoneg_advertised == 0)
+ hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
+ ret_val = e1000_phy_setup_autoneg(hw);
+ if(ret_val) {
+ DEBUGOUT("Error Setting up Auto-Negotiation\n");
+ return ret_val;
+ }
+ DEBUGOUT("Restarting Auto-Neg\n");
+
+ /* Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if(ret_val)
+ return ret_val;
+
+ phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if(ret_val)
+ return ret_val;
+
+ /* Does the user want to wait for Auto-Neg to complete here, or
+ * check at a later time (for example, callback routine).
+ */
+ if(hw->wait_autoneg_complete) {
+ ret_val = e1000_wait_autoneg(hw);
+ if(ret_val) {
+ DEBUGOUT("Error while waiting for autoneg to complete\n");
+ return ret_val;
}
+ }
- /* Options:
- * autoneg = 1 (default)
- * PHY will advertise value(s) parsed from
- * autoneg_advertised and fc
- * autoneg = 0
- * PHY will be set to 10H, 10F, 100H, or 100F
- * depending on value parsed from forced_speed_duplex.
- */
+ hw->get_link_status = TRUE;
- /* Is autoneg enabled? This is enabled by default or by software
- * override. If so, call e1000_phy_setup_autoneg routine to parse the
- * autoneg_advertised and fc options. If autoneg is NOT enabled, then
- * the user should have provided a speed/duplex override. If so, then
- * call e1000_phy_force_speed_duplex to parse and set this up.
- */
- if(hw->autoneg) {
- /* Perform some bounds checking on the hw->autoneg_advertised
- * parameter. If this variable is zero, then set it to the default.
- */
- hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ return E1000_SUCCESS;
+}
- /* If autoneg_advertised is zero, we assume it was not defaulted
- * by the calling code so we set to advertise full capability.
- */
- if(hw->autoneg_advertised == 0)
- hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
- DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
- ret_val = e1000_phy_setup_autoneg(hw);
- if(ret_val) {
- DEBUGOUT("Error Setting up Auto-Negotiation\n");
- return ret_val;
- }
- DEBUGOUT("Restarting Auto-Neg\n");
-
- /* Restart auto-negotiation by setting the Auto Neg Enable bit and
- * the Auto Neg Restart bit in the PHY control register.
- */
- ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
- if(ret_val)
- return ret_val;
-
- phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
- ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
- if(ret_val)
- return ret_val;
-
- /* Does the user want to wait for Auto-Neg to complete here, or
- * check at a later time (for example, callback routine).
- */
- if(hw->wait_autoneg_complete) {
- ret_val = e1000_wait_autoneg(hw);
- if(ret_val) {
- DEBUGOUT("Error while waiting for autoneg to complete\n");
- return ret_val;
- }
- }
- hw->get_link_status = TRUE;
- } else {
- DEBUGOUT("Forcing speed and duplex\n");
- ret_val = e1000_phy_force_speed_duplex(hw);
- if(ret_val) {
- DEBUGOUT("Error Forcing Speed and Duplex\n");
- return ret_val;
- }
+/******************************************************************************
+* Config the MAC and the PHY after link is up.
+* 1) Set up the MAC to the current PHY speed/duplex
+* if we are on 82543. If we
+* are on newer silicon, we only need to configure
+* collision distance in the Transmit Control Register.
+* 2) Set up flow control on the MAC to that established with
+* the link partner.
+* 3) Config DSP to improve Gigabit link quality for some PHY revisions.
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static int32_t
+e1000_copper_link_postconfig(struct e1000_hw *hw)
+{
+ int32_t ret_val;
+ DEBUGFUNC("e1000_copper_link_postconfig");
+
+ if(hw->mac_type >= e1000_82544) {
+ e1000_config_collision_dist(hw);
+ } else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if(ret_val) {
+ DEBUGOUT("Error configuring MAC to PHY settings\n");
+ return ret_val;
}
- } /* !hw->phy_reset_disable */
+ }
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if(ret_val) {
+ DEBUGOUT("Error Configuring Flow Control\n");
+ return ret_val;
+ }
+
+ /* Config DSP to improve Giga link quality */
+ if(hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_config_dsp_after_link_change(hw, TRUE);
+ if(ret_val) {
+ DEBUGOUT("Error Configuring DSP after link up\n");
+ return ret_val;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Detects which PHY is present and setup the speed and duplex
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static int32_t
+e1000_setup_copper_link(struct e1000_hw *hw)
+{
+ int32_t ret_val;
+ uint16_t i;
+ uint16_t phy_data;
+
+ DEBUGFUNC("e1000_setup_copper_link");
+
+ /* Check if it is a valid PHY and set PHY mode if necessary. */
+ ret_val = e1000_copper_link_preconfig(hw);
+ if(ret_val)
+ return ret_val;
+
+ if (hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_2) {
+ ret_val = e1000_copper_link_igp_setup(hw);
+ if(ret_val)
+ return ret_val;
+ } else if (hw->phy_type == e1000_phy_m88) {
+ ret_val = e1000_copper_link_mgp_setup(hw);
+ if(ret_val)
+ return ret_val;
+ }
+
+ if(hw->autoneg) {
+ /* Setup autoneg and flow control advertisement
+ * and perform autonegotiation */
+ ret_val = e1000_copper_link_autoneg(hw);
+ if(ret_val)
+ return ret_val;
+ } else {
+ /* PHY will be set to 10H, 10F, 100H,or 100F
+ * depending on value from forced_speed_duplex. */
+ DEBUGOUT("Forcing speed and duplex\n");
+ ret_val = e1000_phy_force_speed_duplex(hw);
+ if(ret_val) {
+ DEBUGOUT("Error Forcing Speed and Duplex\n");
+ return ret_val;
+ }
+ }
/* Check link status. Wait up to 100 microseconds for link to become
* valid.
@@ -1242,37 +1452,11 @@
return ret_val;
if(phy_data & MII_SR_LINK_STATUS) {
- /* We have link, so we need to finish the config process:
- * 1) Set up the MAC to the current PHY speed/duplex
- * if we are on 82543. If we
- * are on newer silicon, we only need to configure
- * collision distance in the Transmit Control Register.
- * 2) Set up flow control on the MAC to that established with
- * the link partner.
- */
- if(hw->mac_type >= e1000_82544) {
- e1000_config_collision_dist(hw);
- } else {
- ret_val = e1000_config_mac_to_phy(hw);
- if(ret_val) {
- DEBUGOUT("Error configuring MAC to PHY settings\n");
- return ret_val;
- }
- }
- ret_val = e1000_config_fc_after_link_up(hw);
- if(ret_val) {
- DEBUGOUT("Error Configuring Flow Control\n");
+ /* Config the MAC and PHY after link is up */
+ ret_val = e1000_copper_link_postconfig(hw);
+ if(ret_val)
return ret_val;
- }
- DEBUGOUT("Valid link established!!!\n");
-
- if(hw->phy_type == e1000_phy_igp) {
- ret_val = e1000_config_dsp_after_link_change(hw, TRUE);
- if(ret_val) {
- DEBUGOUT("Error Configuring DSP after link up\n");
- return ret_val;
- }
- }
+
DEBUGOUT("Valid link established!!!\n");
return E1000_SUCCESS;
}
@@ -1302,10 +1486,10 @@
if(ret_val)
return ret_val;
- /* Read the MII 1000Base-T Control Register (Address 9). */
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
- if(ret_val)
- return ret_val;
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+ if(ret_val)
+ return ret_val;
/* Need to parse both autoneg_advertised and fc and set up
* the appropriate PHY registers. First we will parse for
@@ -1417,7 +1601,7 @@
DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
- ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
if(ret_val)
return ret_val;
@@ -1678,6 +1862,11 @@
DEBUGFUNC("e1000_config_mac_to_phy");
+ /* 82544 or newer MAC, Auto Speed Detection takes care of
+ * MAC speed/duplex configuration.*/
+ if (hw->mac_type >= e1000_82544)
+ return E1000_SUCCESS;
+
/* Read the Device Control Register and set the bits to Force Speed
* and Duplex.
*/
@@ -1688,45 +1877,25 @@
/* Set up duplex in the Device Control and Transmit Control
* registers depending on negotiated values.
*/
- if (hw->phy_type == e1000_phy_igp) {
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
- &phy_data);
- if(ret_val)
- return ret_val;
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if(ret_val)
+ return ret_val;
- if(phy_data & IGP01E1000_PSSR_FULL_DUPLEX) ctrl |= E1000_CTRL_FD;
- else ctrl &= ~E1000_CTRL_FD;
+ if(phy_data & M88E1000_PSSR_DPLX)
+ ctrl |= E1000_CTRL_FD;
+ else
+ ctrl &= ~E1000_CTRL_FD;
- e1000_config_collision_dist(hw);
+ e1000_config_collision_dist(hw);
- /* Set up speed in the Device Control register depending on
- * negotiated values.
- */
- if((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
- IGP01E1000_PSSR_SPEED_1000MBPS)
- ctrl |= E1000_CTRL_SPD_1000;
- else if((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
- IGP01E1000_PSSR_SPEED_100MBPS)
- ctrl |= E1000_CTRL_SPD_100;
- } else {
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if(ret_val)
- return ret_val;
+ /* Set up speed in the Device Control register depending on
+ * negotiated values.
+ */
+ if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
+ ctrl |= E1000_CTRL_SPD_1000;
+ else if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
+ ctrl |= E1000_CTRL_SPD_100;
- if(phy_data & M88E1000_PSSR_DPLX) ctrl |= E1000_CTRL_FD;
- else ctrl &= ~E1000_CTRL_FD;
-
- e1000_config_collision_dist(hw);
-
- /* Set up speed in the Device Control register depending on
- * negotiated values.
- */
- if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
- ctrl |= E1000_CTRL_SPD_1000;
- else if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
- ctrl |= E1000_CTRL_SPD_100;
- }
/* Write the configured values back to the Device Control Reg. */
E1000_WRITE_REG(hw, CTRL, ctrl);
return E1000_SUCCESS;
@@ -2494,8 +2663,8 @@
DEBUGFUNC("e1000_read_phy_reg");
-
- if(hw->phy_type == e1000_phy_igp &&
+ if((hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
(uint16_t)reg_addr);
@@ -2600,8 +2769,8 @@
DEBUGFUNC("e1000_write_phy_reg");
-
- if(hw->phy_type == e1000_phy_igp &&
+ if((hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
(uint16_t)reg_addr);
@@ -2679,19 +2848,27 @@
return E1000_SUCCESS;
}
+
/******************************************************************************
* Returns the PHY to the power-on reset state
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-void
+int32_t
e1000_phy_hw_reset(struct e1000_hw *hw)
{
uint32_t ctrl, ctrl_ext;
uint32_t led_ctrl;
+ int32_t ret_val;
DEBUGFUNC("e1000_phy_hw_reset");
+ /* In the case of the phy reset being blocked, it's not an error, we
+ * simply return success without performing the reset. */
+ ret_val = e1000_check_phy_reset_block(hw);
+ if (ret_val)
+ return E1000_SUCCESS;
+
DEBUGOUT("Resetting Phy...\n");
if(hw->mac_type > e1000_82543) {
@@ -2727,6 +2904,11 @@
led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
E1000_WRITE_REG(hw, LEDCTL, led_ctrl);
}
+
+ /* Wait for FW to finish PHY configuration. */
+ ret_val = e1000_get_phy_cfg_done(hw);
+
+ return ret_val;
}
/******************************************************************************
@@ -2744,7 +2926,19 @@
DEBUGFUNC("e1000_phy_reset");
- if(hw->mac_type != e1000_82541_rev_2) {
+ /* In the case of the phy reset being blocked, it's not an error, we
+ * simply return success without performing the reset. */
+ ret_val = e1000_check_phy_reset_block(hw);
+ if (ret_val)
+ return E1000_SUCCESS;
+
+ switch (hw->mac_type) {
+ case e1000_82541_rev_2:
+ ret_val = e1000_phy_hw_reset(hw);
+ if(ret_val)
+ return ret_val;
+ break;
+ default:
ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
if(ret_val)
return ret_val;
@@ -2755,9 +2949,10 @@
return ret_val;
udelay(1);
- } else e1000_phy_hw_reset(hw);
+ break;
+ }
- if(hw->phy_type == e1000_phy_igp)
+ if(hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2)
e1000_phy_init_script(hw);
return E1000_SUCCESS;
@@ -2811,6 +3006,9 @@
case e1000_82547_rev_2:
if(hw->phy_id == IGP01E1000_I_PHY_ID) match = TRUE;
break;
+ case e1000_82573:
+ if(hw->phy_id == M88E1111_I_PHY_ID) match = TRUE;
+ break;
default:
DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
return -E1000_ERR_CONFIG;
@@ -2866,7 +3064,7 @@
/* The downshift status is checked only once, after link is established,
* and it stored in the hw->speed_downgraded parameter. */
- phy_info->downshift = hw->speed_downgraded;
+ phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
/* IGP01E1000 does not need to support it. */
phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
@@ -2905,7 +3103,7 @@
if(ret_val)
return ret_val;
- /* transalte to old method */
+ /* Translate to old method */
average = (max_length + min_length) / 2;
if(average <= e1000_igp_cable_length_50)
@@ -2940,7 +3138,7 @@
/* The downshift status is checked only once, after link is established,
* and it stored in the hw->speed_downgraded parameter. */
- phy_info->downshift = hw->speed_downgraded;
+ phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
if(ret_val)
@@ -3029,7 +3227,8 @@
return -E1000_ERR_CONFIG;
}
- if(hw->phy_type == e1000_phy_igp)
+ if(hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_2)
return e1000_phy_igp_get_info(hw, phy_info);
else
return e1000_phy_m88_get_info(hw, phy_info);
@@ -3055,11 +3254,12 @@
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-void
+int32_t
e1000_init_eeprom_params(struct e1000_hw *hw)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
uint32_t eecd = E1000_READ_REG(hw, EECD);
+ int32_t ret_val = E1000_SUCCESS;
uint16_t eeprom_size;
DEBUGFUNC("e1000_init_eeprom_params");
@@ -3074,6 +3274,8 @@
eeprom->opcode_bits = 3;
eeprom->address_bits = 6;
eeprom->delay_usec = 50;
+ eeprom->use_eerd = FALSE;
+ eeprom->use_eewr = FALSE;
break;
case e1000_82540:
case e1000_82545:
@@ -3090,6 +3292,8 @@
eeprom->word_size = 64;
eeprom->address_bits = 6;
}
+ eeprom->use_eerd = FALSE;
+ eeprom->use_eewr = FALSE;
break;
case e1000_82541:
case e1000_82541_rev_2:
@@ -3118,42 +3322,60 @@
eeprom->address_bits = 6;
}
}
+ eeprom->use_eerd = FALSE;
+ eeprom->use_eewr = FALSE;
+ break;
+ case e1000_82573:
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ eeprom->use_eerd = TRUE;
+ eeprom->use_eewr = TRUE;
+ if(e1000_is_onboard_nvm_eeprom(hw) == FALSE) {
+ eeprom->type = e1000_eeprom_flash;
+ eeprom->word_size = 2048;
+
+ /* Ensure that the Autonomous FLASH update bit is cleared due to
+ * Flash update issue on parts which use a FLASH for NVM. */
+ eecd &= ~E1000_EECD_AUPDEN;
+ E1000_WRITE_REG(hw, EECD, eecd);
+ }
break;
default:
break;
}
if (eeprom->type == e1000_eeprom_spi) {
- eeprom->word_size = 64;
- if (e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size) == 0) {
- eeprom_size &= EEPROM_SIZE_MASK;
-
- switch (eeprom_size) {
- case EEPROM_SIZE_16KB:
- eeprom->word_size = 8192;
- break;
- case EEPROM_SIZE_8KB:
- eeprom->word_size = 4096;
- break;
- case EEPROM_SIZE_4KB:
- eeprom->word_size = 2048;
- break;
- case EEPROM_SIZE_2KB:
- eeprom->word_size = 1024;
- break;
- case EEPROM_SIZE_1KB:
- eeprom->word_size = 512;
- break;
- case EEPROM_SIZE_512B:
- eeprom->word_size = 256;
- break;
- case EEPROM_SIZE_128B:
- default:
- eeprom->word_size = 64;
- break;
- }
+ /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to
+ * 32KB (incremented by powers of 2).
+ */
+ if(hw->mac_type <= e1000_82547_rev_2) {
+ /* Set to default value for initial eeprom read. */
+ eeprom->word_size = 64;
+ ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size);
+ if(ret_val)
+ return ret_val;
+ eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT;
+ /* 256B eeprom size was not supported in earlier hardware, so we
+ * bump eeprom_size up one to ensure that "1" (which maps to 256B)
+ * is never the result used in the shifting logic below. */
+ if(eeprom_size)
+ eeprom_size++;
+ } else {
+ eeprom_size = (uint16_t)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+ E1000_EECD_SIZE_EX_SHIFT);
}
+
+ eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT);
}
+ return ret_val;
}
/******************************************************************************
@@ -3306,8 +3528,12 @@
DEBUGFUNC("e1000_acquire_eeprom");
+ if(e1000_get_hw_eeprom_semaphore(hw))
+ return -E1000_ERR_EEPROM;
+
eecd = E1000_READ_REG(hw, EECD);
+ if (hw->mac_type != e1000_82573) {
/* Request EEPROM Access */
if(hw->mac_type > e1000_82544) {
eecd |= E1000_EECD_REQ;
@@ -3326,6 +3552,7 @@
return -E1000_ERR_EEPROM;
}
}
+ }
/* Setup EEPROM for Read/Write */
@@ -3443,6 +3670,8 @@
eecd &= ~E1000_EECD_REQ;
E1000_WRITE_REG(hw, EECD, eecd);
}
+
+ e1000_put_hw_eeprom_semaphore(hw);
}
/******************************************************************************
@@ -3504,8 +3733,10 @@
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
uint32_t i = 0;
+ int32_t ret_val;
DEBUGFUNC("e1000_read_eeprom");
+
/* A check for invalid values: offset too large, too many words, and not
* enough words.
*/
@@ -3515,9 +3746,23 @@
return -E1000_ERR_EEPROM;
}
- /* Prepare the EEPROM for reading */
- if(e1000_acquire_eeprom(hw) != E1000_SUCCESS)
- return -E1000_ERR_EEPROM;
+ /* FLASH reads without acquiring the semaphore are safe in 82573-based
+ * controllers.
+ */
+ if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) ||
+ (hw->mac_type != e1000_82573)) {
+ /* Prepare the EEPROM for reading */
+ if(e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+ }
+
+ if(eeprom->use_eerd == TRUE) {
+ ret_val = e1000_read_eeprom_eerd(hw, offset, words, data);
+ if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) ||
+ (hw->mac_type != e1000_82573))
+ e1000_release_eeprom(hw);
+ return ret_val;
+ }
if(eeprom->type == e1000_eeprom_spi) {
uint16_t word_in;
@@ -3569,6 +3814,132 @@
}
/******************************************************************************
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+int32_t
+e1000_read_eeprom_eerd(struct e1000_hw *hw,
+ uint16_t offset,
+ uint16_t words,
+ uint16_t *data)
+{
+ uint32_t i, eerd = 0;
+ int32_t error = 0;
+
+ for (i = 0; i < words; i++) {
+ eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) +
+ E1000_EEPROM_RW_REG_START;
+
+ E1000_WRITE_REG(hw, EERD, eerd);
+ error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ);
+
+ if(error) {
+ break;
+ }
+ data[i] = (E1000_READ_REG(hw, EERD) >> E1000_EEPROM_RW_REG_DATA);
+
+ }
+
+ return error;
+}
+
+/******************************************************************************
+ * Writes a 16 bit word from the EEPROM using the EEWR register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+int32_t
+e1000_write_eeprom_eewr(struct e1000_hw *hw,
+ uint16_t offset,
+ uint16_t words,
+ uint16_t *data)
+{
+ uint32_t register_value = 0;
+ uint32_t i = 0;
+ int32_t error = 0;
+
+ for (i = 0; i < words; i++) {
+ register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) |
+ ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) |
+ E1000_EEPROM_RW_REG_START;
+
+ error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
+ if(error) {
+ break;
+ }
+
+ E1000_WRITE_REG(hw, EEWR, register_value);
+
+ error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
+
+ if(error) {
+ break;
+ }
+ }
+
+ return error;
+}
+
+/******************************************************************************
+ * Polls the status bit (bit 1) of the EERD to determine when the read is done.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+int32_t
+e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
+{
+ uint32_t attempts = 100000;
+ uint32_t i, reg = 0;
+ int32_t done = E1000_ERR_EEPROM;
+
+ for(i = 0; i < attempts; i++) {
+ if(eerd == E1000_EEPROM_POLL_READ)
+ reg = E1000_READ_REG(hw, EERD);
+ else
+ reg = E1000_READ_REG(hw, EEWR);
+
+ if(reg & E1000_EEPROM_RW_REG_DONE) {
+ done = E1000_SUCCESS;
+ break;
+ }
+ udelay(5);
+ }
+
+ return done;
+}
+
+/***************************************************************************
+* Description: Determines if the onboard NVM is FLASH or EEPROM.
+*
+* hw - Struct containing variables accessed by shared code
+****************************************************************************/
+boolean_t
+e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
+{
+ uint32_t eecd = 0;
+
+ if(hw->mac_type == e1000_82573) {
+ eecd = E1000_READ_REG(hw, EECD);
+
+ /* Isolate bits 15 & 16 */
+ eecd = ((eecd >> 15) & 0x03);
+
+ /* If both bits are set, device is Flash type */
+ if(eecd == 0x03) {
+ return FALSE;
+ }
+ }
+ return TRUE;
+}
+
+/******************************************************************************
* Verifies that the EEPROM has a valid checksum
*
* hw - Struct containing variables accessed by shared code
@@ -3585,6 +3956,25 @@
DEBUGFUNC("e1000_validate_eeprom_checksum");
+ if ((hw->mac_type == e1000_82573) &&
+ (e1000_is_onboard_nvm_eeprom(hw) == FALSE)) {
+ /* Check bit 4 of word 10h. If it is 0, firmware is done updating
+ * 10h-12h. Checksum may need to be fixed. */
+ e1000_read_eeprom(hw, 0x10, 1, &eeprom_data);
+ if ((eeprom_data & 0x10) == 0) {
+ /* Read 0x23 and check bit 15. This bit is a 1 when the checksum
+ * has already been fixed. If the checksum is still wrong and this
+ * bit is a 1, we need to return bad checksum. Otherwise, we need
+ * to set this bit to a 1 and update the checksum. */
+ e1000_read_eeprom(hw, 0x23, 1, &eeprom_data);
+ if ((eeprom_data & 0x8000) == 0) {
+ eeprom_data |= 0x8000;
+ e1000_write_eeprom(hw, 0x23, 1, &eeprom_data);
+ e1000_update_eeprom_checksum(hw);
+ }
+ }
+ }
+
for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
DEBUGOUT("EEPROM Read Error\n");
@@ -3628,6 +4018,8 @@
if(e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
DEBUGOUT("EEPROM Write Error\n");
return -E1000_ERR_EEPROM;
+ } else if (hw->eeprom.type == e1000_eeprom_flash) {
+ e1000_commit_shadow_ram(hw);
}
return E1000_SUCCESS;
}
@@ -3663,6 +4055,10 @@
return -E1000_ERR_EEPROM;
}
+ /* 82573 reads only through eerd */
+ if(eeprom->use_eewr == TRUE)
+ return e1000_write_eeprom_eewr(hw, offset, words, data);
+
/* Prepare the EEPROM for writing */
if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
return -E1000_ERR_EEPROM;
@@ -3833,6 +4229,65 @@
}
/******************************************************************************
+ * Flushes the cached eeprom to NVM. This is done by saving the modified values
+ * in the eeprom cache and the non modified values in the currently active bank
+ * to the new bank.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+int32_t
+e1000_commit_shadow_ram(struct e1000_hw *hw)
+{
+ uint32_t attempts = 100000;
+ uint32_t eecd = 0;
+ uint32_t flop = 0;
+ uint32_t i = 0;
+ int32_t error = E1000_SUCCESS;
+
+ /* The flop register will be used to determine if flash type is STM */
+ flop = E1000_READ_REG(hw, FLOP);
+
+ if (hw->mac_type == e1000_82573) {
+ for (i=0; i < attempts; i++) {
+ eecd = E1000_READ_REG(hw, EECD);
+ if ((eecd & E1000_EECD_FLUPD) == 0) {
+ break;
+ }
+ udelay(5);
+ }
+
+ if (i == attempts) {
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* If STM opcode located in bits 15:8 of flop, reset firmware */
+ if ((flop & 0xFF00) == E1000_STM_OPCODE) {
+ E1000_WRITE_REG(hw, HICR, E1000_HICR_FW_RESET);
+ }
+
+ /* Perform the flash update */
+ E1000_WRITE_REG(hw, EECD, eecd | E1000_EECD_FLUPD);
+
+ for (i=0; i < attempts; i++) {
+ eecd = E1000_READ_REG(hw, EECD);
+ if ((eecd & E1000_EECD_FLUPD) == 0) {
+ break;
+ }
+ udelay(5);
+ }
+
+ if (i == attempts) {
+ return -E1000_ERR_EEPROM;
+ }
+ }
+
+ return error;
+}
+
+/******************************************************************************
* Reads the adapter's part number from the EEPROM
*
* hw - Struct containing variables accessed by shared code
@@ -3911,6 +4366,7 @@
e1000_init_rx_addrs(struct e1000_hw *hw)
{
uint32_t i;
+ uint32_t rar_num;
DEBUGFUNC("e1000_init_rx_addrs");
@@ -3919,9 +4375,10 @@
e1000_rar_set(hw, hw->mac_addr, 0);
+ rar_num = E1000_RAR_ENTRIES;
/* Zero out the other 15 receive addresses. */
DEBUGOUT("Clearing RAR[1-15]\n");
- for(i = 1; i < E1000_RAR_ENTRIES; i++) {
+ for(i = 1; i < rar_num; i++) {
E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
}
@@ -3950,7 +4407,9 @@
{
uint32_t hash_value;
uint32_t i;
-
+ uint32_t num_rar_entry;
+ uint32_t num_mta_entry;
+
DEBUGFUNC("e1000_mc_addr_list_update");
/* Set the new number of MC addresses that we are being requested to use. */
@@ -3958,14 +4417,16 @@
/* Clear RAR[1-15] */
DEBUGOUT(" Clearing RAR[1-15]\n");
- for(i = rar_used_count; i < E1000_RAR_ENTRIES; i++) {
+ num_rar_entry = E1000_RAR_ENTRIES;
+ for(i = rar_used_count; i < num_rar_entry; i++) {
E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
}
/* Clear the MTA */
DEBUGOUT(" Clearing MTA\n");
- for(i = 0; i < E1000_NUM_MTA_REGISTERS; i++) {
+ num_mta_entry = E1000_NUM_MTA_REGISTERS;
+ for(i = 0; i < num_mta_entry; i++) {
E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
}
@@ -3989,7 +4450,7 @@
/* Place this multicast address in the RAR if there is room, *
* else put it in the MTA
*/
- if(rar_used_count < E1000_RAR_ENTRIES) {
+ if (rar_used_count < num_rar_entry) {
e1000_rar_set(hw,
mc_addr_list + (i * (ETH_LENGTH_OF_ADDRESS + pad)),
rar_used_count);
@@ -4040,6 +4501,7 @@
}
hash_value &= 0xFFF;
+
return hash_value;
}
@@ -4144,12 +4606,33 @@
e1000_clear_vfta(struct e1000_hw *hw)
{
uint32_t offset;
+ uint32_t vfta_value = 0;
+ uint32_t vfta_offset = 0;
+ uint32_t vfta_bit_in_reg = 0;
- for(offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++)
- E1000_WRITE_REG_ARRAY(hw, VFTA, offset, 0);
+ if (hw->mac_type == e1000_82573) {
+ if (hw->mng_cookie.vlan_id != 0) {
+ /* The VFTA is a 4096b bit-field, each identifying a single VLAN
+ * ID. The following operations determine which 32b entry
+ * (i.e. offset) into the array we want to set the VLAN ID
+ * (i.e. bit) of the manageability unit. */
+ vfta_offset = (hw->mng_cookie.vlan_id >>
+ E1000_VFTA_ENTRY_SHIFT) &
+ E1000_VFTA_ENTRY_MASK;
+ vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id &
+ E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+ }
+ }
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ /* If the offset we want to clear is the same offset of the
+ * manageability VLAN ID, then clear all bits except that of the
+ * manageability unit */
+ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
+ }
}
-static int32_t
+int32_t
e1000_id_led_init(struct e1000_hw * hw)
{
uint32_t ledctl;
@@ -4480,6 +4963,19 @@
temp = E1000_READ_REG(hw, MGTPRC);
temp = E1000_READ_REG(hw, MGTPDC);
temp = E1000_READ_REG(hw, MGTPTC);
+
+ if(hw->mac_type <= e1000_82547_rev_2) return;
+
+ temp = E1000_READ_REG(hw, IAC);
+ temp = E1000_READ_REG(hw, ICRXOC);
+ temp = E1000_READ_REG(hw, ICRXPTC);
+ temp = E1000_READ_REG(hw, ICRXATC);
+ temp = E1000_READ_REG(hw, ICTXPTC);
+ temp = E1000_READ_REG(hw, ICTXATC);
+ temp = E1000_READ_REG(hw, ICTXQEC);
+ temp = E1000_READ_REG(hw, ICTXQMTC);
+ temp = E1000_READ_REG(hw, ICRXDMTC);
+
}
/******************************************************************************
@@ -4646,6 +5142,11 @@
hw->bus_speed = e1000_bus_speed_unknown;
hw->bus_width = e1000_bus_width_unknown;
break;
+ case e1000_82573:
+ hw->bus_type = e1000_bus_type_pci_express;
+ hw->bus_speed = e1000_bus_speed_2500;
+ hw->bus_width = e1000_bus_width_pciex_4;
+ break;
default:
status = E1000_READ_REG(hw, STATUS);
hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
@@ -4749,6 +5250,7 @@
/* Use old method for Phy older than IGP */
if(hw->phy_type == e1000_phy_m88) {
+
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
&phy_data);
if(ret_val)
@@ -4865,7 +5367,8 @@
return ret_val;
*polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >>
M88E1000_PSSR_REV_POLARITY_SHIFT;
- } else if(hw->phy_type == e1000_phy_igp) {
+ } else if(hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_2) {
/* Read the Status register to check the speed */
ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
&phy_data);
@@ -4917,7 +5420,8 @@
DEBUGFUNC("e1000_check_downshift");
- if(hw->phy_type == e1000_phy_igp) {
+ if(hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_2) {
ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
&phy_data);
if(ret_val)
@@ -4933,6 +5437,7 @@
hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
M88E1000_PSSR_DOWNSHIFT_SHIFT;
}
+
return E1000_SUCCESS;
}
@@ -5047,7 +5552,7 @@
if(ret_val)
return ret_val;
- msec_delay(20);
+ msec_delay_irq(20);
ret_val = e1000_write_phy_reg(hw, 0x0000,
IGP01E1000_IEEE_FORCE_GIGA);
@@ -5071,7 +5576,7 @@
if(ret_val)
return ret_val;
- msec_delay(20);
+ msec_delay_irq(20);
/* Now enable the transmitter */
ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
@@ -5096,7 +5601,7 @@
if(ret_val)
return ret_val;
- msec_delay(20);
+ msec_delay_irq(20);
ret_val = e1000_write_phy_reg(hw, 0x0000,
IGP01E1000_IEEE_FORCE_GIGA);
@@ -5112,7 +5617,7 @@
if(ret_val)
return ret_val;
- msec_delay(20);
+ msec_delay_irq(20);
/* Now enable the transmitter */
ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
@@ -5187,22 +5692,36 @@
uint16_t phy_data;
DEBUGFUNC("e1000_set_d3_lplu_state");
- if(!((hw->mac_type == e1000_82541_rev_2) ||
- (hw->mac_type == e1000_82547_rev_2)))
+ if(hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2)
return E1000_SUCCESS;
/* During driver activity LPLU should not be used or it will attain link
* from the lowest speeds starting from 10Mbps. The capability is used for
* Dx transitions and states */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
- if(ret_val)
- return ret_val;
-
- if(!active) {
- phy_data &= ~IGP01E1000_GMII_FLEX_SPD;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
+ if(hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
if(ret_val)
return ret_val;
+ } else {
+ ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
+ if(ret_val)
+ return ret_val;
+ }
+
+ if(!active) {
+ if(hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data &= ~IGP01E1000_GMII_FLEX_SPD;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
+ if(ret_val)
+ return ret_val;
+ } else {
+ phy_data &= ~IGP02E1000_PM_D3_LPLU;
+ ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
/* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
* Dx states where the power conservation is most important. During
@@ -5236,11 +5755,105 @@
(hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) ||
(hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) {
- phy_data |= IGP01E1000_GMII_FLEX_SPD;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
+ if(hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data |= IGP01E1000_GMII_FLEX_SPD;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
+ if(ret_val)
+ return ret_val;
+ } else {
+ phy_data |= IGP02E1000_PM_D3_LPLU;
+ ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* When LPLU is enabled we should disable SmartSpeed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
if(ret_val)
return ret_val;
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data);
+ if(ret_val)
+ return ret_val;
+
+ }
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ *
+ * This function sets the lplu d0 state according to the active flag. When
+ * activating lplu this function also disables smart speed and vise versa.
+ * lplu will not be activated unless the device autonegotiation advertisment
+ * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * hw: Struct containing variables accessed by shared code
+ * active - true to enable lplu false to disable lplu.
+ *
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ *
+ ****************************************************************************/
+
+int32_t
+e1000_set_d0_lplu_state(struct e1000_hw *hw,
+ boolean_t active)
+{
+ int32_t ret_val;
+ uint16_t phy_data;
+ DEBUGFUNC("e1000_set_d0_lplu_state");
+
+ if(hw->mac_type <= e1000_82547_rev_2)
+ return E1000_SUCCESS;
+
+ ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
+ if(ret_val)
+ return ret_val;
+
+ if (!active) {
+ phy_data &= ~IGP02E1000_PM_D0_LPLU;
+ ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
+ * Dx states where the power conservation is most important. During
+ * driver activity we should enable SmartSpeed, so performance is
+ * maintained. */
+ if (hw->smart_speed == e1000_smart_speed_on) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if(ret_val)
+ return ret_val;
+
+ phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if(ret_val)
+ return ret_val;
+ } else if (hw->smart_speed == e1000_smart_speed_off) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if(ret_val)
+ return ret_val;
+ }
+
+
+ } else {
+
+ phy_data |= IGP02E1000_PM_D0_LPLU;
+ ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
+ if (ret_val)
+ return ret_val;
+
/* When LPLU is enabled we should disable SmartSpeed */
ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
if(ret_val)
@@ -5318,6 +5931,338 @@
return E1000_SUCCESS;
}
+
+/*****************************************************************************
+ * This function reads the cookie from ARC ram.
+ *
+ * returns: - E1000_SUCCESS .
+ ****************************************************************************/
+int32_t
+e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer)
+{
+ uint8_t i;
+ uint32_t offset = E1000_MNG_DHCP_COOKIE_OFFSET;
+ uint8_t length = E1000_MNG_DHCP_COOKIE_LENGTH;
+
+ length = (length >> 2);
+ offset = (offset >> 2);
+
+ for (i = 0; i < length; i++) {
+ *((uint32_t *) buffer + i) =
+ E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i);
+ }
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function checks whether the HOST IF is enabled for command operaton
+ * and also checks whether the previous command is completed.
+ * It busy waits in case of previous command is not completed.
+ *
+ * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or
+ * timeout
+ * - E1000_SUCCESS for success.
+ ****************************************************************************/
+int32_t
+e1000_mng_enable_host_if(struct e1000_hw * hw)
+{
+ uint32_t hicr;
+ uint8_t i;
+
+ /* Check that the host interface is enabled. */
+ hicr = E1000_READ_REG(hw, HICR);
+ if ((hicr & E1000_HICR_EN) == 0) {
+ DEBUGOUT("E1000_HOST_EN bit disabled.\n");
+ return -E1000_ERR_HOST_INTERFACE_COMMAND;
+ }
+ /* check the previous command is completed */
+ for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
+ hicr = E1000_READ_REG(hw, HICR);
+ if (!(hicr & E1000_HICR_C))
+ break;
+ msec_delay_irq(1);
+ }
+
+ if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
+ DEBUGOUT("Previous command timeout failed .\n");
+ return -E1000_ERR_HOST_INTERFACE_COMMAND;
+ }
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ * This function writes the buffer content at the offset given on the host if.
+ * It also does alignment considerations to do the writes in most efficient way.
+ * Also fills up the sum of the buffer in *buffer parameter.
+ *
+ * returns - E1000_SUCCESS for success.
+ ****************************************************************************/
+int32_t
+e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer,
+ uint16_t length, uint16_t offset, uint8_t *sum)
+{
+ uint8_t *tmp;
+ uint8_t *bufptr = buffer;
+ uint32_t data;
+ uint16_t remaining, i, j, prev_bytes;
+
+ /* sum = only sum of the data and it is not checksum */
+
+ if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) {
+ return -E1000_ERR_PARAM;
+ }
+
+ tmp = (uint8_t *)&data;
+ prev_bytes = offset & 0x3;
+ offset &= 0xFFFC;
+ offset >>= 2;
+
+ if (prev_bytes) {
+ data = E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset);
+ for (j = prev_bytes; j < sizeof(uint32_t); j++) {
+ *(tmp + j) = *bufptr++;
+ *sum += *(tmp + j);
+ }
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset, data);
+ length -= j - prev_bytes;
+ offset++;
+ }
+
+ remaining = length & 0x3;
+ length -= remaining;
+
+ /* Calculate length in DWORDs */
+ length >>= 2;
+
+ /* The device driver writes the relevant command block into the
+ * ram area. */
+ for (i = 0; i < length; i++) {
+ for (j = 0; j < sizeof(uint32_t); j++) {
+ *(tmp + j) = *bufptr++;
+ *sum += *(tmp + j);
+ }
+
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data);
+ }
+ if (remaining) {
+ for (j = 0; j < sizeof(uint32_t); j++) {
+ if (j < remaining)
+ *(tmp + j) = *bufptr++;
+ else
+ *(tmp + j) = 0;
+
+ *sum += *(tmp + j);
+ }
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data);
+ }
+
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function writes the command header after does the checksum calculation.
+ *
+ * returns - E1000_SUCCESS for success.
+ ****************************************************************************/
+int32_t
+e1000_mng_write_cmd_header(struct e1000_hw * hw,
+ struct e1000_host_mng_command_header * hdr)
+{
+ uint16_t i;
+ uint8_t sum;
+ uint8_t *buffer;
+
+ /* Write the whole command header structure which includes sum of
+ * the buffer */
+
+ uint16_t length = sizeof(struct e1000_host_mng_command_header);
+
+ sum = hdr->checksum;
+ hdr->checksum = 0;
+
+ buffer = (uint8_t *) hdr;
+ i = length;
+ while(i--)
+ sum += buffer[i];
+
+ hdr->checksum = 0 - sum;
+
+ length >>= 2;
+ /* The device driver writes the relevant command block into the ram area. */
+ for (i = 0; i < length; i++)
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((uint32_t *) hdr + i));
+
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function indicates to ARC that a new command is pending which completes
+ * one write operation by the driver.
+ *
+ * returns - E1000_SUCCESS for success.
+ ****************************************************************************/
+int32_t
+e1000_mng_write_commit(
+ struct e1000_hw * hw)
+{
+ uint32_t hicr;
+
+ hicr = E1000_READ_REG(hw, HICR);
+ /* Setting this bit tells the ARC that a new command is pending. */
+ E1000_WRITE_REG(hw, HICR, hicr | E1000_HICR_C);
+
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function checks the mode of the firmware.
+ *
+ * returns - TRUE when the mode is IAMT or FALSE.
+ ****************************************************************************/
+boolean_t
+e1000_check_mng_mode(
+ struct e1000_hw *hw)
+{
+ uint32_t fwsm;
+
+ fwsm = E1000_READ_REG(hw, FWSM);
+
+ if((fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
+ return TRUE;
+
+ return FALSE;
+}
+
+
+/*****************************************************************************
+ * This function writes the dhcp info .
+ ****************************************************************************/
+int32_t
+e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer,
+ uint16_t length)
+{
+ int32_t ret_val;
+ struct e1000_host_mng_command_header hdr;
+
+ hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
+ hdr.command_length = length;
+ hdr.reserved1 = 0;
+ hdr.reserved2 = 0;
+ hdr.checksum = 0;
+
+ ret_val = e1000_mng_enable_host_if(hw);
+ if (ret_val == E1000_SUCCESS) {
+ ret_val = e1000_mng_host_if_write(hw, buffer, length, sizeof(hdr),
+ &(hdr.checksum));
+ if (ret_val == E1000_SUCCESS) {
+ ret_val = e1000_mng_write_cmd_header(hw, &hdr);
+ if (ret_val == E1000_SUCCESS)
+ ret_val = e1000_mng_write_commit(hw);
+ }
+ }
+ return ret_val;
+}
+
+
+/*****************************************************************************
+ * This function calculates the checksum.
+ *
+ * returns - checksum of buffer contents.
+ ****************************************************************************/
+uint8_t
+e1000_calculate_mng_checksum(char *buffer, uint32_t length)
+{
+ uint8_t sum = 0;
+ uint32_t i;
+
+ if (!buffer)
+ return 0;
+
+ for (i=0; i < length; i++)
+ sum += buffer[i];
+
+ return (uint8_t) (0 - sum);
+}
+
+/*****************************************************************************
+ * This function checks whether tx pkt filtering needs to be enabled or not.
+ *
+ * returns - TRUE for packet filtering or FALSE.
+ ****************************************************************************/
+boolean_t
+e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
+{
+ /* called in init as well as watchdog timer functions */
+
+ int32_t ret_val, checksum;
+ boolean_t tx_filter = FALSE;
+ struct e1000_host_mng_dhcp_cookie *hdr = &(hw->mng_cookie);
+ uint8_t *buffer = (uint8_t *) &(hw->mng_cookie);
+
+ if (e1000_check_mng_mode(hw)) {
+ ret_val = e1000_mng_enable_host_if(hw);
+ if (ret_val == E1000_SUCCESS) {
+ ret_val = e1000_host_if_read_cookie(hw, buffer);
+ if (ret_val == E1000_SUCCESS) {
+ checksum = hdr->checksum;
+ hdr->checksum = 0;
+ if ((hdr->signature == E1000_IAMT_SIGNATURE) &&
+ checksum == e1000_calculate_mng_checksum((char *)buffer,
+ E1000_MNG_DHCP_COOKIE_LENGTH)) {
+ if (hdr->status &
+ E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT)
+ tx_filter = TRUE;
+ } else
+ tx_filter = TRUE;
+ } else
+ tx_filter = TRUE;
+ }
+ }
+
+ hw->tx_pkt_filtering = tx_filter;
+ return tx_filter;
+}
+
+/******************************************************************************
+ * Verifies the hardware needs to allow ARPs to be processed by the host
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * returns: - TRUE/FALSE
+ *
+ *****************************************************************************/
+uint32_t
+e1000_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+ uint32_t manc;
+ uint32_t fwsm, factps;
+
+ if (hw->asf_firmware_present) {
+ manc = E1000_READ_REG(hw, MANC);
+
+ if (!(manc & E1000_MANC_RCV_TCO_EN) ||
+ !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
+ return FALSE;
+ if (e1000_arc_subsystem_valid(hw) == TRUE) {
+ fwsm = E1000_READ_REG(hw, FWSM);
+ factps = E1000_READ_REG(hw, FACTPS);
+
+ if (((fwsm & E1000_FWSM_MODE_MASK) ==
+ (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT)) &&
+ (factps & E1000_FACTPS_MNGCG))
+ return TRUE;
+ } else
+ if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN))
+ return TRUE;
+ }
+ return FALSE;
+}
+
static int32_t
e1000_polarity_reversal_workaround(struct e1000_hw *hw)
{
@@ -5403,3 +6348,265 @@
return E1000_SUCCESS;
}
+/***************************************************************************
+ *
+ * Disables PCI-Express master access.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - none.
+ *
+ ***************************************************************************/
+void
+e1000_set_pci_express_master_disable(struct e1000_hw *hw)
+{
+ uint32_t ctrl;
+
+ DEBUGFUNC("e1000_set_pci_express_master_disable");
+
+ if (hw->bus_type != e1000_bus_type_pci_express)
+ return;
+
+ ctrl = E1000_READ_REG(hw, CTRL);
+ ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
+ E1000_WRITE_REG(hw, CTRL, ctrl);
+}
+
+/***************************************************************************
+ *
+ * Enables PCI-Express master access.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - none.
+ *
+ ***************************************************************************/
+void
+e1000_enable_pciex_master(struct e1000_hw *hw)
+{
+ uint32_t ctrl;
+
+ DEBUGFUNC("e1000_enable_pciex_master");
+
+ if (hw->bus_type != e1000_bus_type_pci_express)
+ return;
+
+ ctrl = E1000_READ_REG(hw, CTRL);
+ ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE;
+ E1000_WRITE_REG(hw, CTRL, ctrl);
+}
+
+/*******************************************************************************
+ *
+ * Disables PCI-Express master access and verifies there are no pending requests
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_MASTER_REQUESTS_PENDING if master disable bit hasn't
+ * caused the master requests to be disabled.
+ * E1000_SUCCESS master requests disabled.
+ *
+ ******************************************************************************/
+int32_t
+e1000_disable_pciex_master(struct e1000_hw *hw)
+{
+ int32_t timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */
+
+ DEBUGFUNC("e1000_disable_pciex_master");
+
+ if (hw->bus_type != e1000_bus_type_pci_express)
+ return E1000_SUCCESS;
+
+ e1000_set_pci_express_master_disable(hw);
+
+ while(timeout) {
+ if(!(E1000_READ_REG(hw, STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
+ break;
+ else
+ udelay(100);
+ timeout--;
+ }
+
+ if(!timeout) {
+ DEBUGOUT("Master requests are pending.\n");
+ return -E1000_ERR_MASTER_REQUESTS_PENDING;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/*******************************************************************************
+ *
+ * Check for EEPROM Auto Read bit done.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ *
+ ******************************************************************************/
+int32_t
+e1000_get_auto_rd_done(struct e1000_hw *hw)
+{
+ int32_t timeout = AUTO_READ_DONE_TIMEOUT;
+
+ DEBUGFUNC("e1000_get_auto_rd_done");
+
+ switch (hw->mac_type) {
+ default:
+ msec_delay(5);
+ break;
+ case e1000_82573:
+ while(timeout) {
+ if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break;
+ else msec_delay(1);
+ timeout--;
+ }
+
+ if(!timeout) {
+ DEBUGOUT("Auto read by HW from EEPROM has not completed.\n");
+ return -E1000_ERR_RESET;
+ }
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ * Checks if the PHY configuration is done
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ *
+ ***************************************************************************/
+int32_t
+e1000_get_phy_cfg_done(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_get_phy_cfg_done");
+
+ /* Simply wait for 10ms */
+ msec_delay(10);
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Using the combination of SMBI and SWESMBI semaphore bits when resetting
+ * adapter or Eeprom access.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_EEPROM if fail to access EEPROM.
+ * E1000_SUCCESS at any other case.
+ *
+ ***************************************************************************/
+int32_t
+e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
+{
+ int32_t timeout;
+ uint32_t swsm;
+
+ DEBUGFUNC("e1000_get_hw_eeprom_semaphore");
+
+ if(!hw->eeprom_semaphore_present)
+ return E1000_SUCCESS;
+
+
+ /* Get the FW semaphore. */
+ timeout = hw->eeprom.word_size + 1;
+ while(timeout) {
+ swsm = E1000_READ_REG(hw, SWSM);
+ swsm |= E1000_SWSM_SWESMBI;
+ E1000_WRITE_REG(hw, SWSM, swsm);
+ /* if we managed to set the bit we got the semaphore. */
+ swsm = E1000_READ_REG(hw, SWSM);
+ if(swsm & E1000_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ timeout--;
+ }
+
+ if(!timeout) {
+ /* Release semaphores */
+ e1000_put_hw_eeprom_semaphore(hw);
+ DEBUGOUT("Driver can't access the Eeprom - SWESMBI bit is set.\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ * This function clears HW semaphore bits.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - None.
+ *
+ ***************************************************************************/
+void
+e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
+{
+ uint32_t swsm;
+
+ DEBUGFUNC("e1000_put_hw_eeprom_semaphore");
+
+ if(!hw->eeprom_semaphore_present)
+ return;
+
+ swsm = E1000_READ_REG(hw, SWSM);
+ /* Release both semaphores. */
+ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+ E1000_WRITE_REG(hw, SWSM, swsm);
+}
+
+/******************************************************************************
+ * Checks if PHY reset is blocked due to SOL/IDER session, for example.
+ * Returning E1000_BLK_PHY_RESET isn't necessarily an error. But it's up to
+ * the caller to figure out how to deal with it.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_BLK_PHY_RESET
+ * E1000_SUCCESS
+ *
+ *****************************************************************************/
+int32_t
+e1000_check_phy_reset_block(struct e1000_hw *hw)
+{
+ uint32_t manc = 0;
+ if(hw->mac_type > e1000_82547_rev_2)
+ manc = E1000_READ_REG(hw, MANC);
+ return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
+ E1000_BLK_PHY_RESET : E1000_SUCCESS;
+}
+
+uint8_t
+e1000_arc_subsystem_valid(struct e1000_hw *hw)
+{
+ uint32_t fwsm;
+
+ /* On 8257x silicon, registers in the range of 0x8800 - 0x8FFC
+ * may not be provided a DMA clock when no manageability features are
+ * enabled. We do not want to perform any reads/writes to these registers
+ * if this is the case. We read FWSM to determine the manageability mode.
+ */
+ switch (hw->mac_type) {
+ case e1000_82573:
+ fwsm = E1000_READ_REG(hw, FWSM);
+ if((fwsm & E1000_FWSM_MODE_MASK) != 0)
+ return TRUE;
+ break;
+ default:
+ break;
+ }
+ return FALSE;
+}
+
+
+
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index f397e63..a0263ee 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -1,7 +1,7 @@
/*******************************************************************************
- Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
+ Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
@@ -57,6 +57,7 @@
e1000_82541_rev_2,
e1000_82547,
e1000_82547_rev_2,
+ e1000_82573,
e1000_num_macs
} e1000_mac_type;
@@ -64,6 +65,7 @@
e1000_eeprom_uninitialized = 0,
e1000_eeprom_spi,
e1000_eeprom_microwire,
+ e1000_eeprom_flash,
e1000_num_eeprom_types
} e1000_eeprom_type;
@@ -96,6 +98,7 @@
e1000_bus_type_unknown = 0,
e1000_bus_type_pci,
e1000_bus_type_pcix,
+ e1000_bus_type_pci_express,
e1000_bus_type_reserved
} e1000_bus_type;
@@ -107,6 +110,7 @@
e1000_bus_speed_100,
e1000_bus_speed_120,
e1000_bus_speed_133,
+ e1000_bus_speed_2500,
e1000_bus_speed_reserved
} e1000_bus_speed;
@@ -115,6 +119,8 @@
e1000_bus_width_unknown = 0,
e1000_bus_width_32,
e1000_bus_width_64,
+ e1000_bus_width_pciex_1,
+ e1000_bus_width_pciex_4,
e1000_bus_width_reserved
} e1000_bus_width;
@@ -196,6 +202,7 @@
typedef enum {
e1000_phy_m88 = 0,
e1000_phy_igp,
+ e1000_phy_igp_2,
e1000_phy_undefined = 0xFF
} e1000_phy_type;
@@ -242,8 +249,19 @@
uint16_t address_bits;
uint16_t delay_usec;
uint16_t page_size;
+ boolean_t use_eerd;
+ boolean_t use_eewr;
};
+/* Flex ASF Information */
+#define E1000_HOST_IF_MAX_SIZE 2048
+
+typedef enum {
+ e1000_byte_align = 0,
+ e1000_word_align = 1,
+ e1000_dword_align = 2
+} e1000_align_type;
+
/* Error Codes */
@@ -254,11 +272,16 @@
#define E1000_ERR_PARAM 4
#define E1000_ERR_MAC_TYPE 5
#define E1000_ERR_PHY_TYPE 6
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_ERR_HOST_INTERFACE_COMMAND 11
+#define E1000_BLK_PHY_RESET 12
/* Function prototypes */
/* Initialization */
int32_t e1000_reset_hw(struct e1000_hw *hw);
int32_t e1000_init_hw(struct e1000_hw *hw);
+int32_t e1000_id_led_init(struct e1000_hw * hw);
int32_t e1000_set_mac_type(struct e1000_hw *hw);
void e1000_set_media_type(struct e1000_hw *hw);
@@ -275,7 +298,7 @@
/* PHY */
int32_t e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy_data);
int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
-void e1000_phy_hw_reset(struct e1000_hw *hw);
+int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
int32_t e1000_phy_reset(struct e1000_hw *hw);
int32_t e1000_detect_gig_phy(struct e1000_hw *hw);
int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
@@ -287,13 +310,86 @@
int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);
/* EEPROM Functions */
-void e1000_init_eeprom_params(struct e1000_hw *hw);
+int32_t e1000_init_eeprom_params(struct e1000_hw *hw);
+boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw);
+int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data);
+int32_t e1000_write_eeprom_eewr(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data);
+int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd);
+
+/* MNG HOST IF functions */
+uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw);
+
+#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */
+
+#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */
+#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
+#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
+#define E1000_MNG_IAMT_MODE 0x3
+#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */
+
+#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */
+#define E1000_VFTA_ENTRY_SHIFT 0x5
+#define E1000_VFTA_ENTRY_MASK 0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
+
+struct e1000_host_mng_command_header {
+ uint8_t command_id;
+ uint8_t checksum;
+ uint16_t reserved1;
+ uint16_t reserved2;
+ uint16_t command_length;
+};
+
+struct e1000_host_mng_command_info {
+ struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ uint8_t command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658*/
+};
+#ifdef __BIG_ENDIAN
+struct e1000_host_mng_dhcp_cookie{
+ uint32_t signature;
+ uint16_t vlan_id;
+ uint8_t reserved0;
+ uint8_t status;
+ uint32_t reserved1;
+ uint8_t checksum;
+ uint8_t reserved3;
+ uint16_t reserved2;
+};
+#else
+struct e1000_host_mng_dhcp_cookie{
+ uint32_t signature;
+ uint8_t status;
+ uint8_t reserved0;
+ uint16_t vlan_id;
+ uint32_t reserved1;
+ uint16_t reserved2;
+ uint8_t reserved3;
+ uint8_t checksum;
+};
+#endif
+
+int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer,
+ uint16_t length);
+boolean_t e1000_check_mng_mode(struct e1000_hw *hw);
+boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
+int32_t e1000_mng_enable_host_if(struct e1000_hw *hw);
+int32_t e1000_mng_host_if_write(struct e1000_hw *hw, uint8_t *buffer,
+ uint16_t length, uint16_t offset, uint8_t *sum);
+int32_t e1000_mng_write_cmd_header(struct e1000_hw* hw,
+ struct e1000_host_mng_command_header* hdr);
+
+int32_t e1000_mng_write_commit(struct e1000_hw *hw);
+
int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data);
int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw);
int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw);
int32_t e1000_write_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data);
int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num);
int32_t e1000_read_mac_addr(struct e1000_hw * hw);
+int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
+void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask);
/* Filters (multicast, vlan, receive) */
void e1000_init_rx_addrs(struct e1000_hw *hw);
@@ -313,7 +409,6 @@
/* Adaptive IFS Functions */
/* Everything else */
-uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw);
void e1000_clear_hw_cntrs(struct e1000_hw *hw);
void e1000_reset_adaptive(struct e1000_hw *hw);
void e1000_update_adaptive(struct e1000_hw *hw);
@@ -330,6 +425,19 @@
void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value);
int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, boolean_t link_up);
int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active);
+int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active);
+void e1000_set_pci_express_master_disable(struct e1000_hw *hw);
+void e1000_enable_pciex_master(struct e1000_hw *hw);
+int32_t e1000_disable_pciex_master(struct e1000_hw *hw);
+int32_t e1000_get_auto_rd_done(struct e1000_hw *hw);
+int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw);
+int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
+void e1000_release_software_semaphore(struct e1000_hw *hw);
+int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
+int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw);
+void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
+int32_t e1000_commit_shadow_ram(struct e1000_hw *hw);
+uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw);
#define E1000_READ_REG_IO(a, reg) \
e1000_read_reg_io((a), E1000_##reg)
@@ -369,6 +477,10 @@
#define E1000_DEV_ID_82546GB_SERDES 0x107B
#define E1000_DEV_ID_82546GB_PCIE 0x108A
#define E1000_DEV_ID_82547EI 0x1019
+#define E1000_DEV_ID_82573E 0x108B
+#define E1000_DEV_ID_82573E_IAMT 0x108C
+
+#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
#define NODE_ADDRESS_SIZE 6
#define ETH_LENGTH_OF_ADDRESS 6
@@ -381,6 +493,7 @@
#define E1000_REVISION_0 0
#define E1000_REVISION_1 1
#define E1000_REVISION_2 2
+#define E1000_REVISION_3 3
#define SPEED_10 10
#define SPEED_100 100
@@ -437,6 +550,7 @@
E1000_IMS_RXSEQ | \
E1000_IMS_LSC)
+
/* Number of high/low register pairs in the RAR. The RAR (Receive Address
* Registers) holds the directed and multicast addresses that we monitor. We
* reserve one of these spots for our directed address, allowing us room for
@@ -457,14 +571,74 @@
uint16_t special;
};
+/* Receive Descriptor - Extended */
+union e1000_rx_desc_extended {
+ struct {
+ uint64_t buffer_addr;
+ uint64_t reserved;
+ } read;
+ struct {
+ struct {
+ uint32_t mrq; /* Multiple Rx Queues */
+ union {
+ uint32_t rss; /* RSS Hash */
+ struct {
+ uint16_t ip_id; /* IP id */
+ uint16_t csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ uint32_t status_error; /* ext status/error */
+ uint16_t length;
+ uint16_t vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define MAX_PS_BUFFERS 4
+/* Receive Descriptor - Packet Split */
+union e1000_rx_desc_packet_split {
+ struct {
+ /* one buffer for protocol header(s), three data buffers */
+ uint64_t buffer_addr[MAX_PS_BUFFERS];
+ } read;
+ struct {
+ struct {
+ uint32_t mrq; /* Multiple Rx Queues */
+ union {
+ uint32_t rss; /* RSS Hash */
+ struct {
+ uint16_t ip_id; /* IP id */
+ uint16_t csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ uint32_t status_error; /* ext status/error */
+ uint16_t length0; /* length of buffer 0 */
+ uint16_t vlan; /* VLAN tag */
+ } middle;
+ struct {
+ uint16_t header_status;
+ uint16_t length[3]; /* length of buffers 1-3 */
+ } upper;
+ uint64_t reserved;
+ } wb; /* writeback */
+};
+
/* Receive Decriptor bit definitions */
#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */
#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */
+#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
+#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
@@ -474,9 +648,20 @@
#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
-#define E1000_RXD_SPC_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */
+#define E1000_RXD_SPC_PRI_SHIFT 13
#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
-#define E1000_RXD_SPC_CFI_SHIFT 0x000C /* CFI is bit 12 */
+#define E1000_RXD_SPC_CFI_SHIFT 12
+
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
+#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
/* mask to determine if packets should be dropped due to frame errors */
#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
@@ -486,6 +671,15 @@
E1000_RXD_ERR_CXE | \
E1000_RXD_ERR_RXE)
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
/* Transmit Descriptor */
struct e1000_tx_desc {
uint64_t buffer_addr; /* Address of the descriptor's data buffer */
@@ -667,6 +861,7 @@
#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
#define E1000_RCTL 0x00100 /* RX Control - RW */
#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
@@ -676,9 +871,23 @@
#define E1000_TBT 0x00448 /* TX Burst Timer - RW */
#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
+#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_FLASH_UPDATES 1000
+#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
+#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
+#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_FLSWCTL 0x01030 /* FLASH control register */
+#define E1000_FLSWDATA 0x01034 /* FLASH data register */
+#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
+#define E1000_FLOP 0x0103C /* FLASH Opcode Register */
+#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */
@@ -688,6 +897,7 @@
#define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */
#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
+#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
@@ -703,6 +913,14 @@
#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
+#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */
+#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */
+#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */
+#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */
+#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */
+#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */
+#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */
+#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */
#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
@@ -761,7 +979,17 @@
#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_IAC 0x4100 /* Interrupt Assertion Count */
+#define E1000_ICRXPTC 0x4104 /* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXATC 0x4108 /* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICTXPTC 0x410C /* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXATC 0x4110 /* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXQEC 0x4118 /* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQMTC 0x411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x4120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXOC 0x4124 /* Interrupt Cause Receiver Overrun Count */
#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
+#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
#define E1000_RA 0x05400 /* Receive Address - RW Array */
#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
@@ -779,6 +1007,16 @@
#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
+#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
+#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
+#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
+#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_FWSM 0x05B54 /* FW Semaphore */
+#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
+#define E1000_HICR 0x08F00 /* Host Inteface Control */
/* Register Set (82542)
*
* Some of the 82542 registers are located at different offsets than they are
@@ -829,6 +1067,18 @@
#define E1000_82542_VFTA 0x00600
#define E1000_82542_LEDCTL E1000_LEDCTL
#define E1000_82542_PBA E1000_PBA
+#define E1000_82542_PBS E1000_PBS
+#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
+#define E1000_82542_EEARBC E1000_EEARBC
+#define E1000_82542_FLASHT E1000_FLASHT
+#define E1000_82542_EEWR E1000_EEWR
+#define E1000_82542_FLSWCTL E1000_FLSWCTL
+#define E1000_82542_FLSWDATA E1000_FLSWDATA
+#define E1000_82542_FLSWCNT E1000_FLSWCNT
+#define E1000_82542_FLOP E1000_FLOP
+#define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL
+#define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE
+#define E1000_82542_ERT E1000_ERT
#define E1000_82542_RXDCTL E1000_RXDCTL
#define E1000_82542_RADV E1000_RADV
#define E1000_82542_RSRPD E1000_RSRPD
@@ -913,6 +1163,38 @@
#define E1000_82542_FFMT E1000_FFMT
#define E1000_82542_FFVT E1000_FFVT
#define E1000_82542_HOST_IF E1000_HOST_IF
+#define E1000_82542_IAM E1000_IAM
+#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
+#define E1000_82542_PSRCTL E1000_PSRCTL
+#define E1000_82542_RAID E1000_RAID
+#define E1000_82542_TARC0 E1000_TARC0
+#define E1000_82542_TDBAL1 E1000_TDBAL1
+#define E1000_82542_TDBAH1 E1000_TDBAH1
+#define E1000_82542_TDLEN1 E1000_TDLEN1
+#define E1000_82542_TDH1 E1000_TDH1
+#define E1000_82542_TDT1 E1000_TDT1
+#define E1000_82542_TXDCTL1 E1000_TXDCTL1
+#define E1000_82542_TARC1 E1000_TARC1
+#define E1000_82542_RFCTL E1000_RFCTL
+#define E1000_82542_GCR E1000_GCR
+#define E1000_82542_GSCL_1 E1000_GSCL_1
+#define E1000_82542_GSCL_2 E1000_GSCL_2
+#define E1000_82542_GSCL_3 E1000_GSCL_3
+#define E1000_82542_GSCL_4 E1000_GSCL_4
+#define E1000_82542_FACTPS E1000_FACTPS
+#define E1000_82542_SWSM E1000_SWSM
+#define E1000_82542_FWSM E1000_FWSM
+#define E1000_82542_FFLT_DBG E1000_FFLT_DBG
+#define E1000_82542_IAC E1000_IAC
+#define E1000_82542_ICRXPTC E1000_ICRXPTC
+#define E1000_82542_ICRXATC E1000_ICRXATC
+#define E1000_82542_ICTXPTC E1000_ICTXPTC
+#define E1000_82542_ICTXATC E1000_ICTXATC
+#define E1000_82542_ICTXQEC E1000_ICTXQEC
+#define E1000_82542_ICTXQMTC E1000_ICTXQMTC
+#define E1000_82542_ICRXDMTC E1000_ICRXDMTC
+#define E1000_82542_ICRXOC E1000_ICRXOC
+#define E1000_82542_HICR E1000_HICR
/* Statistics counters collected by the MAC */
struct e1000_hw_stats {
@@ -974,11 +1256,21 @@
uint64_t bptc;
uint64_t tsctc;
uint64_t tsctfc;
+ uint64_t iac;
+ uint64_t icrxptc;
+ uint64_t icrxatc;
+ uint64_t ictxptc;
+ uint64_t ictxatc;
+ uint64_t ictxqec;
+ uint64_t ictxqmtc;
+ uint64_t icrxdmtc;
+ uint64_t icrxoc;
};
/* Structure containing variables used by the shared code (e1000_hw.c) */
struct e1000_hw {
- uint8_t __iomem *hw_addr;
+ uint8_t *hw_addr;
+ uint8_t *flash_address;
e1000_mac_type mac_type;
e1000_phy_type phy_type;
uint32_t phy_init_script;
@@ -993,6 +1285,7 @@
e1000_ms_type original_master_slave;
e1000_ffe_config ffe_config_state;
uint32_t asf_firmware_present;
+ uint32_t eeprom_semaphore_present;
unsigned long io_base;
uint32_t phy_id;
uint32_t phy_revision;
@@ -1009,6 +1302,8 @@
uint32_t ledctl_default;
uint32_t ledctl_mode1;
uint32_t ledctl_mode2;
+ boolean_t tx_pkt_filtering;
+ struct e1000_host_mng_dhcp_cookie mng_cookie;
uint16_t phy_spd_default;
uint16_t autoneg_advertised;
uint16_t pci_cmd_word;
@@ -1047,16 +1342,24 @@
boolean_t adaptive_ifs;
boolean_t ifs_params_forced;
boolean_t in_ifs_mode;
+ boolean_t mng_reg_access_disabled;
};
#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */
#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */
+#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */
+#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */
+#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */
+#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */
/* Register Bit Masks */
/* Device Control */
#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
@@ -1070,6 +1373,7 @@
#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
@@ -1089,6 +1393,7 @@
#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
@@ -1098,6 +1403,8 @@
#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
+#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
@@ -1128,6 +1435,18 @@
#ifndef E1000_EEPROM_GRANT_ATTEMPTS
#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
#endif
+#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */
+#define E1000_EECD_SIZE_EX_SHIFT 11
+#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */
+#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
+#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
+#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
+#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
+#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
+#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+#define E1000_STM_OPCODE 0xDB00
+#define E1000_HICR_FW_RESET 0xC0
/* EEPROM Read */
#define E1000_EERD_START 0x00000001 /* Start Read */
@@ -1171,6 +1490,8 @@
#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
+#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
/* MDI Control */
#define E1000_MDIC_DATA_MASK 0x0000FFFF
@@ -1187,14 +1508,17 @@
/* LED Control */
#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_BLINK_RATE 0x0000020
#define E1000_LEDCTL_LED0_IVRT 0x00000040
#define E1000_LEDCTL_LED0_BLINK 0x00000080
#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00
#define E1000_LEDCTL_LED1_MODE_SHIFT 8
+#define E1000_LEDCTL_LED1_BLINK_RATE 0x0002000
#define E1000_LEDCTL_LED1_IVRT 0x00004000
#define E1000_LEDCTL_LED1_BLINK 0x00008000
#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000
#define E1000_LEDCTL_LED2_MODE_SHIFT 16
+#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000
#define E1000_LEDCTL_LED2_IVRT 0x00400000
#define E1000_LEDCTL_LED2_BLINK 0x00800000
#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
@@ -1238,6 +1562,10 @@
#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
#define E1000_ICR_TXD_LOW 0x00008000
#define E1000_ICR_SRPD 0x00010000
+#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
+#define E1000_ICR_MNG 0x00040000 /* Manageability event */
+#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
/* Interrupt Cause Set */
#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
@@ -1255,6 +1583,9 @@
#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
#define E1000_ICS_SRPD E1000_ICR_SRPD
+#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
/* Interrupt Mask Set */
#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
@@ -1272,6 +1603,9 @@
#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
#define E1000_IMS_SRPD E1000_ICR_SRPD
+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
/* Interrupt Mask Clear */
#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
@@ -1289,6 +1623,9 @@
#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
#define E1000_IMC_SRPD E1000_ICR_SRPD
+#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */
/* Receive Control */
#define E1000_RCTL_RST 0x00000001 /* Software reset */
@@ -1301,6 +1638,8 @@
#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
+#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
@@ -1327,6 +1666,34 @@
#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */
+#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */
+
+/* Use byte values for the following shift parameters
+ * Usage:
+ * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ * E1000_PSRCTL_BSIZE0_MASK) |
+ * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ * E1000_PSRCTL_BSIZE1_MASK) |
+ * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ * E1000_PSRCTL_BSIZE2_MASK) |
+ * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ * E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256], default=256
+ * value1 = [1024..64512], default=4096
+ * value2 = [0..64512], default=4096
+ * value3 = [0..64512], default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
/* Receive Descriptor */
#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
@@ -1341,6 +1708,23 @@
#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+/* Header split receive */
+#define E1000_RFCTL_ISCSI_DIS 0x00000001
+#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E
+#define E1000_RFCTL_ISCSI_DWC_SHIFT 1
+#define E1000_RFCTL_NFSW_DIS 0x00000040
+#define E1000_RFCTL_NFSR_DIS 0x00000080
+#define E1000_RFCTL_NFS_VER_MASK 0x00000300
+#define E1000_RFCTL_NFS_VER_SHIFT 8
+#define E1000_RFCTL_IPV6_DIS 0x00000400
+#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800
+#define E1000_RFCTL_ACK_DIS 0x00001000
+#define E1000_RFCTL_ACKD_DIS 0x00002000
+#define E1000_RFCTL_IPFRSP_DIS 0x00004000
+#define E1000_RFCTL_EXTEN 0x00008000
+#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
+#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+
/* Receive Descriptor Control */
#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
@@ -1354,6 +1738,8 @@
#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
+ still to be processed. */
/* Transmit Configuration Word */
#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
@@ -1387,12 +1773,16 @@
#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
+#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
/* Receive Checksum Control */
#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
+#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+
/* Definitions for power management and wakeup registers */
/* Wake Up Control */
@@ -1411,6 +1801,7 @@
#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
@@ -1446,13 +1837,19 @@
#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
* Filtering */
+#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
* filtering */
#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host
* memory */
+#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address
+ * filtering */
+#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */
+#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
@@ -1463,11 +1860,97 @@
#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
+
+/* FW Semaphore Register */
+#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */
+#define E1000_FWSM_MODE_SHIFT 1
+#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */
+
+/* FFLT Debug Register */
+#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */
+
+typedef enum {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_interface_only
+} e1000_mng_mode;
+
+/* Host Inteface Control Register */
+#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */
+#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done
+ * to put command in RAM */
+#define E1000_HICR_SV 0x00000004 /* Status Validity */
+#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */
+
+/* Host Interface Command Interface - Address range 0x8800-0x8EFF */
+#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */
+#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */
+#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */
+#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */
+
+struct e1000_host_command_header {
+ uint8_t command_id;
+ uint8_t command_length;
+ uint8_t command_options; /* I/F bits for command, status for return */
+ uint8_t checksum;
+};
+struct e1000_host_command_info {
+ struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ uint8_t command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */
+};
+
+/* Host SMB register #0 */
+#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */
+#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */
+#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */
+#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */
+
+/* Host SMB register #1 */
+#define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN
+#define E1000_HSMC1R_DATAIN E1000_HSMC0R_DATAIN
+#define E1000_HSMC1R_DATAOUT E1000_HSMC0R_DATAOUT
+#define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT
+
+/* FW Status Register */
+#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */
+
/* Wake Up Packet Length */
#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
#define E1000_MDALIGN 4096
+#define E1000_GCR_BEM32 0x00400000
+/* Function Active and Power State to MNG */
+#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003
+#define E1000_FACTPS_LAN0_VALID 0x00000004
+#define E1000_FACTPS_FUNC0_AUX_EN 0x00000008
+#define E1000_FACTPS_FUNC1_POWER_STATE_MASK 0x000000C0
+#define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT 6
+#define E1000_FACTPS_LAN1_VALID 0x00000100
+#define E1000_FACTPS_FUNC1_AUX_EN 0x00000200
+#define E1000_FACTPS_FUNC2_POWER_STATE_MASK 0x00003000
+#define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT 12
+#define E1000_FACTPS_IDE_ENABLE 0x00004000
+#define E1000_FACTPS_FUNC2_AUX_EN 0x00008000
+#define E1000_FACTPS_FUNC3_POWER_STATE_MASK 0x000C0000
+#define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT 18
+#define E1000_FACTPS_SP_ENABLE 0x00100000
+#define E1000_FACTPS_FUNC3_AUX_EN 0x00200000
+#define E1000_FACTPS_FUNC4_POWER_STATE_MASK 0x03000000
+#define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT 24
+#define E1000_FACTPS_IPMI_ENABLE 0x04000000
+#define E1000_FACTPS_FUNC4_AUX_EN 0x08000000
+#define E1000_FACTPS_MNGCG 0x20000000
+#define E1000_FACTPS_LAN_FUNC_SEL 0x40000000
+#define E1000_FACTPS_PM_STATE_CHANGED 0x80000000
+
/* EEPROM Commands - Microwire */
#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */
#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */
@@ -1477,22 +1960,20 @@
/* EEPROM Commands - SPI */
#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
-#define EEPROM_READ_OPCODE_SPI 0x3 /* EEPROM read opcode */
-#define EEPROM_WRITE_OPCODE_SPI 0x2 /* EEPROM write opcode */
-#define EEPROM_A8_OPCODE_SPI 0x8 /* opcode bit-3 = address bit-8 */
-#define EEPROM_WREN_OPCODE_SPI 0x6 /* EEPROM set Write Enable latch */
-#define EEPROM_WRDI_OPCODE_SPI 0x4 /* EEPROM reset Write Enable latch */
-#define EEPROM_RDSR_OPCODE_SPI 0x5 /* EEPROM read Status register */
-#define EEPROM_WRSR_OPCODE_SPI 0x1 /* EEPROM write Status register */
+#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
+#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */
+#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */
+#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */
+#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */
+#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
+#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
+#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
/* EEPROM Size definitions */
-#define EEPROM_SIZE_16KB 0x1800
-#define EEPROM_SIZE_8KB 0x1400
-#define EEPROM_SIZE_4KB 0x1000
-#define EEPROM_SIZE_2KB 0x0C00
-#define EEPROM_SIZE_1KB 0x0800
-#define EEPROM_SIZE_512B 0x0400
-#define EEPROM_SIZE_128B 0x0000
+#define EEPROM_WORD_SIZE_SHIFT 6
+#define EEPROM_SIZE_SHIFT 10
#define EEPROM_SIZE_MASK 0x1C00
/* EEPROM Word Offsets */
@@ -1606,7 +2087,22 @@
#define IFS_MIN 40
#define IFS_RATIO 4
+/* Extended Configuration Control and Size */
+#define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE 0x00000002
+#define E1000_EXTCNF_CTRL_D_UD_ENABLE 0x00000004
+#define E1000_EXTCNF_CTRL_D_UD_LATENCY 0x00000008
+#define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010
+#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
+#define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x1FFF0000
+
+#define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF
+#define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000
+
/* PBA constants */
+#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
#define E1000_PBA_22K 0x0016
#define E1000_PBA_24K 0x0018
@@ -1663,6 +2159,13 @@
/* Number of milliseconds we wait for auto-negotiation to complete */
#define LINK_UP_TIMEOUT 500
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT 800
+/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
+#define AUTO_READ_DONE_TIMEOUT 10
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT 40
+
#define E1000_TX_BUFFER_SIZE ((uint32_t)1514)
/* The carrier extension symbol, as received by the NIC. */
@@ -1763,6 +2266,7 @@
#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */
#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
+#define IGP02E1000_PHY_POWER_MGMT 0x19
#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */
/* IGP01E1000 AGC Registers - stores the cable length values*/
@@ -1771,12 +2275,20 @@
#define IGP01E1000_PHY_AGC_C 0x1472
#define IGP01E1000_PHY_AGC_D 0x1872
+/* IGP02E1000 AGC Registers for cable length values */
+#define IGP02E1000_PHY_AGC_A 0x11B1
+#define IGP02E1000_PHY_AGC_B 0x12B1
+#define IGP02E1000_PHY_AGC_C 0x14B1
+#define IGP02E1000_PHY_AGC_D 0x18B1
+
/* IGP01E1000 DSP Reset Register */
#define IGP01E1000_PHY_DSP_RESET 0x1F33
#define IGP01E1000_PHY_DSP_SET 0x1F71
#define IGP01E1000_PHY_DSP_FFE 0x1F35
#define IGP01E1000_PHY_CHANNEL_NUM 4
+#define IGP02E1000_PHY_CHANNEL_NUM 4
+
#define IGP01E1000_PHY_AGC_PARAM_A 0x1171
#define IGP01E1000_PHY_AGC_PARAM_B 0x1271
#define IGP01E1000_PHY_AGC_PARAM_C 0x1471
@@ -2060,20 +2572,30 @@
#define IGP01E1000_MSE_CHANNEL_B 0x0F00
#define IGP01E1000_MSE_CHANNEL_A 0xF000
+#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
+#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */
+#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */
+
/* IGP01E1000 DSP reset macros */
#define DSP_RESET_ENABLE 0x0
#define DSP_RESET_DISABLE 0x2
#define E1000_MAX_DSP_RESETS 10
-/* IGP01E1000 AGC Registers */
+/* IGP01E1000 & IGP02E1000 AGC Registers */
#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */
+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */
+
+/* IGP02E1000 AGC Register Length 9-bit mask */
+#define IGP02E1000_AGC_LENGTH_MASK 0x7F
/* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */
#define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128
+#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 128
-/* The precision of the length is +/- 10 meters */
+/* The precision error of the cable length is +/- 10 meters */
#define IGP01E1000_AGC_RANGE 10
+#define IGP02E1000_AGC_RANGE 10
/* IGP01E1000 PCS Initialization register */
/* bits 3:6 in the PCS registers stores the channels polarity */
@@ -2113,6 +2635,8 @@
#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
#define M88E1011_I_REV_4 0x04
+#define M88E1111_I_PHY_ID 0x01410CC0
+#define L1LXT971A_PHY_ID 0x001378E0
/* Miscellaneous PHY bit definitions. */
#define PHY_PREAMBLE 0xFFFFFFFF
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 82549a6..325495b 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1,7 +1,7 @@
/*******************************************************************************
- Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
+ Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
@@ -29,33 +29,9 @@
#include "e1000.h"
/* Change Log
- * 5.3.12 6/7/04
- * - kcompat NETIF_MSG for older kernels (2.4.9) <sean.p.mcdermott@intel.com>
- * - if_mii support and associated kcompat for older kernels
- * - More errlogging support from Jon Mason <jonmason@us.ibm.com>
- * - Fix TSO issues on PPC64 machines -- Jon Mason <jonmason@us.ibm.com>
- *
- * 5.7.1 12/16/04
- * - Resurrect 82547EI/GI related fix in e1000_intr to avoid deadlocks. This
- * fix was removed as it caused system instability. The suspected cause of
- * this is the called to e1000_irq_disable in e1000_intr. Inlined the
- * required piece of e1000_irq_disable into e1000_intr - Anton Blanchard
- * 5.7.0 12/10/04
- * - include fix to the condition that determines when to quit NAPI - Robert Olsson
- * - use netif_poll_{disable/enable} to synchronize between NAPI and i/f up/down
- * 5.6.5 11/01/04
- * - Enabling NETIF_F_SG without checksum offload is illegal -
- John Mason <jdmason@us.ibm.com>
- * 5.6.3 10/26/04
- * - Remove redundant initialization - Jamal Hadi
- * - Reset buffer_info->dma in tx resource cleanup logic
- * 5.6.2 10/12/04
- * - Avoid filling tx_ring completely - shemminger@osdl.org
- * - Replace schedule_timeout() with msleep()/msleep_interruptible() -
- * nacc@us.ibm.com
- * - Sparse cleanup - shemminger@osdl.org
- * - Fix tx resource cleanup logic
- * - LLTX support - ak@suse.de and hadi@cyberus.ca
+ * 6.0.44+ 2/15/05
+ * o applied Anton's patch to resolve tx hang in hardware
+ * o Applied Andrew Mortons patch - e1000 stops working after resume
*/
char e1000_driver_name[] = "e1000";
@@ -65,7 +41,7 @@
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "5.7.6-k2"DRIVERNAPI
+#define DRV_VERSION "6.0.54-k2"DRIVERNAPI
char e1000_driver_version[] = DRV_VERSION;
char e1000_copyright[] = "Copyright (c) 1999-2004 Intel Corporation.";
@@ -96,6 +72,7 @@
INTEL_E1000_ETHERNET_DEVICE(0x1017),
INTEL_E1000_ETHERNET_DEVICE(0x1018),
INTEL_E1000_ETHERNET_DEVICE(0x1019),
+ INTEL_E1000_ETHERNET_DEVICE(0x101A),
INTEL_E1000_ETHERNET_DEVICE(0x101D),
INTEL_E1000_ETHERNET_DEVICE(0x101E),
INTEL_E1000_ETHERNET_DEVICE(0x1026),
@@ -110,6 +87,9 @@
INTEL_E1000_ETHERNET_DEVICE(0x107B),
INTEL_E1000_ETHERNET_DEVICE(0x107C),
INTEL_E1000_ETHERNET_DEVICE(0x108A),
+ INTEL_E1000_ETHERNET_DEVICE(0x108B),
+ INTEL_E1000_ETHERNET_DEVICE(0x108C),
+ INTEL_E1000_ETHERNET_DEVICE(0x1099),
/* required last entry */
{0,}
};
@@ -155,10 +135,14 @@
static int e1000_clean(struct net_device *netdev, int *budget);
static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
int *work_done, int work_to_do);
+static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+ int *work_done, int work_to_do);
#else
static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter);
+static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter);
#endif
static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter);
+static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter);
static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
int cmd);
@@ -286,7 +270,29 @@
E1000_WRITE_FLUSH(&adapter->hw);
}
}
-
+void
+e1000_update_mng_vlan(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ uint16_t vid = adapter->hw.mng_cookie.vlan_id;
+ uint16_t old_vid = adapter->mng_vlan_id;
+ if(adapter->vlgrp) {
+ if(!adapter->vlgrp->vlan_devices[vid]) {
+ if(adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
+ e1000_vlan_rx_add_vid(netdev, vid);
+ adapter->mng_vlan_id = vid;
+ } else
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+
+ if((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !adapter->vlgrp->vlan_devices[old_vid])
+ e1000_vlan_rx_kill_vid(netdev, old_vid);
+ }
+ }
+}
+
int
e1000_up(struct e1000_adapter *adapter)
{
@@ -310,19 +316,33 @@
e1000_configure_tx(adapter);
e1000_setup_rctl(adapter);
e1000_configure_rx(adapter);
- e1000_alloc_rx_buffers(adapter);
+ adapter->alloc_rx_buf(adapter);
+#ifdef CONFIG_PCI_MSI
+ if(adapter->hw.mac_type > e1000_82547_rev_2) {
+ adapter->have_msi = TRUE;
+ if((err = pci_enable_msi(adapter->pdev))) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate MSI interrupt Error: %d\n", err);
+ adapter->have_msi = FALSE;
+ }
+ }
+#endif
if((err = request_irq(adapter->pdev->irq, &e1000_intr,
SA_SHIRQ | SA_SAMPLE_RANDOM,
- netdev->name, netdev)))
+ netdev->name, netdev))) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate interrupt Error: %d\n", err);
return err;
+ }
mod_timer(&adapter->watchdog_timer, jiffies);
- e1000_irq_enable(adapter);
#ifdef CONFIG_E1000_NAPI
netif_poll_enable(netdev);
#endif
+ e1000_irq_enable(adapter);
+
return 0;
}
@@ -333,6 +353,11 @@
e1000_irq_disable(adapter);
free_irq(adapter->pdev->irq, netdev);
+#ifdef CONFIG_PCI_MSI
+ if(adapter->hw.mac_type > e1000_82547_rev_2 &&
+ adapter->have_msi == TRUE)
+ pci_disable_msi(adapter->pdev);
+#endif
del_timer_sync(&adapter->tx_fifo_stall_timer);
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
@@ -350,62 +375,93 @@
e1000_clean_rx_ring(adapter);
/* If WoL is not enabled
+ * and management mode is not IAMT
* Power down the PHY so no link is implied when interface is down */
- if(!adapter->wol && adapter->hw.media_type == e1000_media_type_copper) {
+ if(!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.media_type == e1000_media_type_copper &&
+ !e1000_check_mng_mode(&adapter->hw) &&
+ !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN)) {
uint16_t mii_reg;
e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
mii_reg |= MII_CR_POWER_DOWN;
e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
+ mdelay(1);
}
}
void
e1000_reset(struct e1000_adapter *adapter)
{
- uint32_t pba;
+ struct net_device *netdev = adapter->netdev;
+ uint32_t pba, manc;
+ uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
+ uint16_t fc_low_water_mark = E1000_FC_LOW_DIFF;
/* Repartition Pba for greater than 9k mtu
* To take effect CTRL.RST is required.
*/
- if(adapter->hw.mac_type < e1000_82547) {
- if(adapter->rx_buffer_len > E1000_RXBUFFER_8192)
- pba = E1000_PBA_40K;
- else
- pba = E1000_PBA_48K;
- } else {
- if(adapter->rx_buffer_len > E1000_RXBUFFER_8192)
- pba = E1000_PBA_22K;
- else
- pba = E1000_PBA_30K;
+ switch (adapter->hw.mac_type) {
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ pba = E1000_PBA_30K;
+ break;
+ case e1000_82573:
+ pba = E1000_PBA_12K;
+ break;
+ default:
+ pba = E1000_PBA_48K;
+ break;
+ }
+
+ if((adapter->hw.mac_type != e1000_82573) &&
+ (adapter->rx_buffer_len > E1000_RXBUFFER_8192)) {
+ pba -= 8; /* allocate more FIFO for Tx */
+ /* send an XOFF when there is enough space in the
+ * Rx FIFO to hold one extra full size Rx packet
+ */
+ fc_high_water_mark = netdev->mtu + ENET_HEADER_SIZE +
+ ETHERNET_FCS_SIZE + 1;
+ fc_low_water_mark = fc_high_water_mark + 8;
+ }
+
+
+ if(adapter->hw.mac_type == e1000_82547) {
adapter->tx_fifo_head = 0;
adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
adapter->tx_fifo_size =
(E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
atomic_set(&adapter->tx_fifo_stall, 0);
}
+
E1000_WRITE_REG(&adapter->hw, PBA, pba);
/* flow control settings */
adapter->hw.fc_high_water = (pba << E1000_PBA_BYTES_SHIFT) -
- E1000_FC_HIGH_DIFF;
+ fc_high_water_mark;
adapter->hw.fc_low_water = (pba << E1000_PBA_BYTES_SHIFT) -
- E1000_FC_LOW_DIFF;
+ fc_low_water_mark;
adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
adapter->hw.fc_send_xon = 1;
adapter->hw.fc = adapter->hw.original_fc;
+ /* Allow time for pending master requests to run */
e1000_reset_hw(&adapter->hw);
if(adapter->hw.mac_type >= e1000_82544)
E1000_WRITE_REG(&adapter->hw, WUC, 0);
if(e1000_init_hw(&adapter->hw))
DPRINTK(PROBE, ERR, "Hardware Error\n");
-
+ e1000_update_mng_vlan(adapter);
/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE);
e1000_reset_adaptive(&adapter->hw);
e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
+ if (adapter->en_mng_pt) {
+ manc = E1000_READ_REG(&adapter->hw, MANC);
+ manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
+ E1000_WRITE_REG(&adapter->hw, MANC, manc);
+ }
}
/**
@@ -426,15 +482,13 @@
{
struct net_device *netdev;
struct e1000_adapter *adapter;
+ unsigned long mmio_start, mmio_len;
+ uint32_t swsm;
+
static int cards_found = 0;
- unsigned long mmio_start;
- int mmio_len;
- int pci_using_dac;
- int i;
- int err;
+ int i, err, pci_using_dac;
uint16_t eeprom_data;
uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
-
if((err = pci_enable_device(pdev)))
return err;
@@ -521,6 +575,9 @@
if((err = e1000_sw_init(adapter)))
goto err_sw_init;
+ if((err = e1000_check_phy_reset_block(&adapter->hw)))
+ DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
+
if(adapter->hw.mac_type >= e1000_82543) {
netdev->features = NETIF_F_SG |
NETIF_F_HW_CSUM |
@@ -533,6 +590,11 @@
if((adapter->hw.mac_type >= e1000_82544) &&
(adapter->hw.mac_type != e1000_82547))
netdev->features |= NETIF_F_TSO;
+
+#ifdef NETIF_F_TSO_IPV6
+ if(adapter->hw.mac_type > e1000_82547_rev_2)
+ netdev->features |= NETIF_F_TSO_IPV6;
+#endif
#endif
if(pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
@@ -540,6 +602,8 @@
/* hard_start_xmit is safe against parallel locking */
netdev->features |= NETIF_F_LLTX;
+ adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
+
/* before reading the EEPROM, reset the controller to
* put the device in a known good starting state */
@@ -555,7 +619,7 @@
/* copy the MAC address out of the EEPROM */
- if (e1000_read_mac_addr(&adapter->hw))
+ if(e1000_read_mac_addr(&adapter->hw))
DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
@@ -629,6 +693,17 @@
/* reset the hardware with the new settings */
e1000_reset(adapter);
+ /* Let firmware know the driver has taken over */
+ switch(adapter->hw.mac_type) {
+ case e1000_82573:
+ swsm = E1000_READ_REG(&adapter->hw, SWSM);
+ E1000_WRITE_REG(&adapter->hw, SWSM,
+ swsm | E1000_SWSM_DRV_LOAD);
+ break;
+ default:
+ break;
+ }
+
strcpy(netdev->name, "eth%d");
if((err = register_netdev(netdev)))
goto err_register;
@@ -664,7 +739,7 @@
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev->priv;
- uint32_t manc;
+ uint32_t manc, swsm;
flush_scheduled_work();
@@ -677,9 +752,21 @@
}
}
+ switch(adapter->hw.mac_type) {
+ case e1000_82573:
+ swsm = E1000_READ_REG(&adapter->hw, SWSM);
+ E1000_WRITE_REG(&adapter->hw, SWSM,
+ swsm & ~E1000_SWSM_DRV_LOAD);
+ break;
+
+ default:
+ break;
+ }
+
unregister_netdev(netdev);
- e1000_phy_hw_reset(&adapter->hw);
+ if(!e1000_check_phy_reset_block(&adapter->hw))
+ e1000_phy_hw_reset(&adapter->hw);
iounmap(adapter->hw.hw_addr);
pci_release_regions(pdev);
@@ -717,6 +804,7 @@
pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ adapter->rx_ps_bsize0 = E1000_RXBUFFER_256;
hw->max_frame_size = netdev->mtu +
ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
@@ -730,7 +818,10 @@
/* initialize eeprom parameters */
- e1000_init_eeprom_params(hw);
+ if(e1000_init_eeprom_params(hw)) {
+ E1000_ERR("EEPROM initialization failed\n");
+ return -EIO;
+ }
switch(hw->mac_type) {
default:
@@ -795,6 +886,11 @@
if((err = e1000_up(adapter)))
goto err_up;
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ if((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
+ e1000_update_mng_vlan(adapter);
+ }
return E1000_SUCCESS;
@@ -830,14 +926,18 @@
e1000_free_tx_resources(adapter);
e1000_free_rx_resources(adapter);
+ if((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ }
return 0;
}
/**
* e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
* @adapter: address of board private structure
- * @begin: address of beginning of memory
- * @end: address of end of memory
+ * @start: address of beginning of memory
+ * @len: length of memory
**/
static inline boolean_t
e1000_check_64k_bound(struct e1000_adapter *adapter,
@@ -846,12 +946,10 @@
unsigned long begin = (unsigned long) start;
unsigned long end = begin + len;
- /* first rev 82545 and 82546 need to not allow any memory
- * write location to cross a 64k boundary due to errata 23 */
+ /* First rev 82545 and 82546 need to not allow any memory
+ * write location to cross 64k boundary due to errata 23 */
if (adapter->hw.mac_type == e1000_82545 ||
- adapter->hw.mac_type == e1000_82546 ) {
-
- /* check buffer doesn't cross 64kB */
+ adapter->hw.mac_type == e1000_82546) {
return ((begin ^ (end - 1)) >> 16) != 0 ? FALSE : TRUE;
}
@@ -875,8 +973,8 @@
size = sizeof(struct e1000_buffer) * txdr->count;
txdr->buffer_info = vmalloc(size);
if(!txdr->buffer_info) {
- DPRINTK(PROBE, ERR,
- "Unable to Allocate Memory for the Transmit descriptor ring\n");
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the transmit descriptor ring\n");
return -ENOMEM;
}
memset(txdr->buffer_info, 0, size);
@@ -889,38 +987,38 @@
txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
if(!txdr->desc) {
setup_tx_desc_die:
- DPRINTK(PROBE, ERR,
- "Unable to Allocate Memory for the Transmit descriptor ring\n");
vfree(txdr->buffer_info);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the transmit descriptor ring\n");
return -ENOMEM;
}
- /* fix for errata 23, cant cross 64kB boundary */
+ /* Fix for errata 23, can't cross 64kB boundary */
if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
void *olddesc = txdr->desc;
dma_addr_t olddma = txdr->dma;
- DPRINTK(TX_ERR,ERR,"txdr align check failed: %u bytes at %p\n",
- txdr->size, txdr->desc);
- /* try again, without freeing the previous */
+ DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
+ "at %p\n", txdr->size, txdr->desc);
+ /* Try again, without freeing the previous */
txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
- /* failed allocation, critial failure */
if(!txdr->desc) {
+ /* Failed allocation, critical failure */
pci_free_consistent(pdev, txdr->size, olddesc, olddma);
goto setup_tx_desc_die;
}
if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
/* give up */
- pci_free_consistent(pdev, txdr->size,
- txdr->desc, txdr->dma);
+ pci_free_consistent(pdev, txdr->size, txdr->desc,
+ txdr->dma);
pci_free_consistent(pdev, txdr->size, olddesc, olddma);
DPRINTK(PROBE, ERR,
- "Unable to Allocate aligned Memory for the Transmit"
- " descriptor ring\n");
+ "Unable to allocate aligned memory "
+ "for the transmit descriptor ring\n");
vfree(txdr->buffer_info);
return -ENOMEM;
} else {
- /* free old, move on with the new one since its okay */
+ /* Free old allocation, new allocation was successful */
pci_free_consistent(pdev, txdr->size, olddesc, olddma);
}
}
@@ -1022,59 +1120,88 @@
{
struct e1000_desc_ring *rxdr = &adapter->rx_ring;
struct pci_dev *pdev = adapter->pdev;
- int size;
+ int size, desc_len;
size = sizeof(struct e1000_buffer) * rxdr->count;
rxdr->buffer_info = vmalloc(size);
if(!rxdr->buffer_info) {
- DPRINTK(PROBE, ERR,
- "Unable to Allocate Memory for the Recieve descriptor ring\n");
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
return -ENOMEM;
}
memset(rxdr->buffer_info, 0, size);
+ size = sizeof(struct e1000_ps_page) * rxdr->count;
+ rxdr->ps_page = kmalloc(size, GFP_KERNEL);
+ if(!rxdr->ps_page) {
+ vfree(rxdr->buffer_info);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(rxdr->ps_page, 0, size);
+
+ size = sizeof(struct e1000_ps_page_dma) * rxdr->count;
+ rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL);
+ if(!rxdr->ps_page_dma) {
+ vfree(rxdr->buffer_info);
+ kfree(rxdr->ps_page);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(rxdr->ps_page_dma, 0, size);
+
+ if(adapter->hw.mac_type <= e1000_82547_rev_2)
+ desc_len = sizeof(struct e1000_rx_desc);
+ else
+ desc_len = sizeof(union e1000_rx_desc_packet_split);
+
/* Round up to nearest 4K */
- rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc);
+ rxdr->size = rxdr->count * desc_len;
E1000_ROUNDUP(rxdr->size, 4096);
rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
if(!rxdr->desc) {
setup_rx_desc_die:
- DPRINTK(PROBE, ERR,
- "Unble to Allocate Memory for the Recieve descriptor ring\n");
vfree(rxdr->buffer_info);
+ kfree(rxdr->ps_page);
+ kfree(rxdr->ps_page_dma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
return -ENOMEM;
}
- /* fix for errata 23, cant cross 64kB boundary */
+ /* Fix for errata 23, can't cross 64kB boundary */
if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
void *olddesc = rxdr->desc;
dma_addr_t olddma = rxdr->dma;
- DPRINTK(RX_ERR,ERR,
- "rxdr align check failed: %u bytes at %p\n",
- rxdr->size, rxdr->desc);
- /* try again, without freeing the previous */
+ DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
+ "at %p\n", rxdr->size, rxdr->desc);
+ /* Try again, without freeing the previous */
rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
- /* failed allocation, critial failure */
if(!rxdr->desc) {
+ /* Failed allocation, critical failure */
pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
goto setup_rx_desc_die;
}
if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
/* give up */
- pci_free_consistent(pdev, rxdr->size,
- rxdr->desc, rxdr->dma);
+ pci_free_consistent(pdev, rxdr->size, rxdr->desc,
+ rxdr->dma);
pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
- DPRINTK(PROBE, ERR,
- "Unable to Allocate aligned Memory for the"
- " Receive descriptor ring\n");
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate aligned memory "
+ "for the receive descriptor ring\n");
vfree(rxdr->buffer_info);
+ kfree(rxdr->ps_page);
+ kfree(rxdr->ps_page_dma);
return -ENOMEM;
} else {
- /* free old, move on with the new one since its okay */
+ /* Free old allocation, new allocation was successful */
pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
}
}
@@ -1087,14 +1214,15 @@
}
/**
- * e1000_setup_rctl - configure the receive control register
+ * e1000_setup_rctl - configure the receive control registers
* @adapter: Board private structure
**/
static void
e1000_setup_rctl(struct e1000_adapter *adapter)
{
- uint32_t rctl;
+ uint32_t rctl, rfctl;
+ uint32_t psrctl = 0;
rctl = E1000_READ_REG(&adapter->hw, RCTL);
@@ -1109,24 +1237,69 @@
else
rctl &= ~E1000_RCTL_SBP;
+ if (adapter->netdev->mtu <= ETH_DATA_LEN)
+ rctl &= ~E1000_RCTL_LPE;
+ else
+ rctl |= E1000_RCTL_LPE;
+
/* Setup buffer sizes */
- rctl &= ~(E1000_RCTL_SZ_4096);
- rctl |= (E1000_RCTL_BSEX | E1000_RCTL_LPE);
- switch (adapter->rx_buffer_len) {
- case E1000_RXBUFFER_2048:
- default:
- rctl |= E1000_RCTL_SZ_2048;
- rctl &= ~(E1000_RCTL_BSEX | E1000_RCTL_LPE);
- break;
- case E1000_RXBUFFER_4096:
- rctl |= E1000_RCTL_SZ_4096;
- break;
- case E1000_RXBUFFER_8192:
- rctl |= E1000_RCTL_SZ_8192;
- break;
- case E1000_RXBUFFER_16384:
- rctl |= E1000_RCTL_SZ_16384;
- break;
+ if(adapter->hw.mac_type == e1000_82573) {
+ /* We can now specify buffers in 1K increments.
+ * BSIZE and BSEX are ignored in this case. */
+ rctl |= adapter->rx_buffer_len << 0x11;
+ } else {
+ rctl &= ~E1000_RCTL_SZ_4096;
+ rctl |= E1000_RCTL_BSEX;
+ switch (adapter->rx_buffer_len) {
+ case E1000_RXBUFFER_2048:
+ default:
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_4096:
+ rctl |= E1000_RCTL_SZ_4096;
+ break;
+ case E1000_RXBUFFER_8192:
+ rctl |= E1000_RCTL_SZ_8192;
+ break;
+ case E1000_RXBUFFER_16384:
+ rctl |= E1000_RCTL_SZ_16384;
+ break;
+ }
+ }
+
+#ifdef CONFIG_E1000_PACKET_SPLIT
+ /* 82571 and greater support packet-split where the protocol
+ * header is placed in skb->data and the packet data is
+ * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
+ * In the case of a non-split, skb->data is linearly filled,
+ * followed by the page buffers. Therefore, skb->data is
+ * sized to hold the largest protocol header.
+ */
+ adapter->rx_ps = (adapter->hw.mac_type > e1000_82547_rev_2)
+ && (adapter->netdev->mtu
+ < ((3 * PAGE_SIZE) + adapter->rx_ps_bsize0));
+#endif
+ if(adapter->rx_ps) {
+ /* Configure extra packet-split registers */
+ rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
+ rfctl |= E1000_RFCTL_EXTEN;
+ /* disable IPv6 packet split support */
+ rfctl |= E1000_RFCTL_IPV6_DIS;
+ E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
+
+ rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC;
+
+ psrctl |= adapter->rx_ps_bsize0 >>
+ E1000_PSRCTL_BSIZE0_SHIFT;
+ psrctl |= PAGE_SIZE >>
+ E1000_PSRCTL_BSIZE1_SHIFT;
+ psrctl |= PAGE_SIZE <<
+ E1000_PSRCTL_BSIZE2_SHIFT;
+ psrctl |= PAGE_SIZE <<
+ E1000_PSRCTL_BSIZE3_SHIFT;
+
+ E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
}
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
@@ -1143,9 +1316,18 @@
e1000_configure_rx(struct e1000_adapter *adapter)
{
uint64_t rdba = adapter->rx_ring.dma;
- uint32_t rdlen = adapter->rx_ring.count * sizeof(struct e1000_rx_desc);
- uint32_t rctl;
- uint32_t rxcsum;
+ uint32_t rdlen, rctl, rxcsum;
+
+ if(adapter->rx_ps) {
+ rdlen = adapter->rx_ring.count *
+ sizeof(union e1000_rx_desc_packet_split);
+ adapter->clean_rx = e1000_clean_rx_irq_ps;
+ adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
+ } else {
+ rdlen = adapter->rx_ring.count * sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
+ }
/* disable receives while setting up the descriptors */
rctl = E1000_READ_REG(&adapter->hw, RCTL);
@@ -1172,13 +1354,27 @@
E1000_WRITE_REG(&adapter->hw, RDT, 0);
/* Enable 82543 Receive Checksum Offload for TCP and UDP */
- if((adapter->hw.mac_type >= e1000_82543) &&
- (adapter->rx_csum == TRUE)) {
+ if(adapter->hw.mac_type >= e1000_82543) {
rxcsum = E1000_READ_REG(&adapter->hw, RXCSUM);
- rxcsum |= E1000_RXCSUM_TUOFL;
+ if(adapter->rx_csum == TRUE) {
+ rxcsum |= E1000_RXCSUM_TUOFL;
+
+ /* Enable 82573 IPv4 payload checksum for UDP fragments
+ * Must be used in conjunction with packet-split. */
+ if((adapter->hw.mac_type > e1000_82547_rev_2) &&
+ (adapter->rx_ps)) {
+ rxcsum |= E1000_RXCSUM_IPPCSE;
+ }
+ } else {
+ rxcsum &= ~E1000_RXCSUM_TUOFL;
+ /* don't need to clear IPPCSE as it defaults to 0 */
+ }
E1000_WRITE_REG(&adapter->hw, RXCSUM, rxcsum);
}
+ if (adapter->hw.mac_type == e1000_82573)
+ E1000_WRITE_REG(&adapter->hw, ERT, 0x0100);
+
/* Enable Receives */
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
}
@@ -1210,13 +1406,11 @@
e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
struct e1000_buffer *buffer_info)
{
- struct pci_dev *pdev = adapter->pdev;
-
if(buffer_info->dma) {
- pci_unmap_page(pdev,
- buffer_info->dma,
- buffer_info->length,
- PCI_DMA_TODEVICE);
+ pci_unmap_page(adapter->pdev,
+ buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_TODEVICE);
buffer_info->dma = 0;
}
if(buffer_info->skb) {
@@ -1241,7 +1435,7 @@
/* Free all the Tx ring sk_buffs */
if (likely(adapter->previous_buffer_info.skb != NULL)) {
- e1000_unmap_and_free_tx_resource(adapter,
+ e1000_unmap_and_free_tx_resource(adapter,
&adapter->previous_buffer_info);
}
@@ -1281,6 +1475,10 @@
vfree(rx_ring->buffer_info);
rx_ring->buffer_info = NULL;
+ kfree(rx_ring->ps_page);
+ rx_ring->ps_page = NULL;
+ kfree(rx_ring->ps_page_dma);
+ rx_ring->ps_page_dma = NULL;
pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
@@ -1297,16 +1495,19 @@
{
struct e1000_desc_ring *rx_ring = &adapter->rx_ring;
struct e1000_buffer *buffer_info;
+ struct e1000_ps_page *ps_page;
+ struct e1000_ps_page_dma *ps_page_dma;
struct pci_dev *pdev = adapter->pdev;
unsigned long size;
- unsigned int i;
+ unsigned int i, j;
/* Free all the Rx ring sk_buffs */
for(i = 0; i < rx_ring->count; i++) {
buffer_info = &rx_ring->buffer_info[i];
if(buffer_info->skb) {
-
+ ps_page = &rx_ring->ps_page[i];
+ ps_page_dma = &rx_ring->ps_page_dma[i];
pci_unmap_single(pdev,
buffer_info->dma,
buffer_info->length,
@@ -1314,11 +1515,25 @@
dev_kfree_skb(buffer_info->skb);
buffer_info->skb = NULL;
+
+ for(j = 0; j < PS_PAGE_BUFFERS; j++) {
+ if(!ps_page->ps_page[j]) break;
+ pci_unmap_single(pdev,
+ ps_page_dma->ps_page_dma[j],
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ ps_page_dma->ps_page_dma[j] = 0;
+ put_page(ps_page->ps_page[j]);
+ ps_page->ps_page[j] = NULL;
+ }
}
}
size = sizeof(struct e1000_buffer) * rx_ring->count;
memset(rx_ring->buffer_info, 0, size);
+ size = sizeof(struct e1000_ps_page) * rx_ring->count;
+ memset(rx_ring->ps_page, 0, size);
+ size = sizeof(struct e1000_ps_page_dma) * rx_ring->count;
+ memset(rx_ring->ps_page_dma, 0, size);
/* Zero out the descriptor ring */
@@ -1422,15 +1637,15 @@
struct e1000_adapter *adapter = netdev->priv;
struct e1000_hw *hw = &adapter->hw;
struct dev_mc_list *mc_ptr;
+ unsigned long flags;
uint32_t rctl;
uint32_t hash_value;
int i;
- unsigned long flags;
-
- /* Check for Promiscuous and All Multicast modes */
spin_lock_irqsave(&adapter->tx_lock, flags);
+ /* Check for Promiscuous and All Multicast modes */
+
rctl = E1000_READ_REG(hw, RCTL);
if(netdev->flags & IFF_PROMISC) {
@@ -1556,6 +1771,11 @@
uint32_t link;
e1000_check_for_link(&adapter->hw);
+ if (adapter->hw.mac_type == e1000_82573) {
+ e1000_enable_tx_pkt_filtering(&adapter->hw);
+ if(adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
+ e1000_update_mng_vlan(adapter);
+ }
if((adapter->hw.media_type == e1000_media_type_internal_serdes) &&
!(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE))
@@ -1632,7 +1852,7 @@
/* Cause software interrupt to ensure rx ring is cleaned */
E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
- /* Force detection of hung controller every watchdog period*/
+ /* Force detection of hung controller every watchdog period */
adapter->detect_tx_hung = TRUE;
/* Reset the timer */
@@ -1642,6 +1862,7 @@
#define E1000_TX_FLAGS_CSUM 0x00000001
#define E1000_TX_FLAGS_VLAN 0x00000002
#define E1000_TX_FLAGS_TSO 0x00000004
+#define E1000_TX_FLAGS_IPV4 0x00000008
#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
#define E1000_TX_FLAGS_VLAN_SHIFT 16
@@ -1652,7 +1873,7 @@
struct e1000_context_desc *context_desc;
unsigned int i;
uint32_t cmd_length = 0;
- uint16_t ipcse, tucse, mss;
+ uint16_t ipcse = 0, tucse, mss;
uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
int err;
@@ -1665,23 +1886,37 @@
hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
mss = skb_shinfo(skb)->tso_size;
- skb->nh.iph->tot_len = 0;
- skb->nh.iph->check = 0;
- skb->h.th->check = ~csum_tcpudp_magic(skb->nh.iph->saddr,
- skb->nh.iph->daddr,
- 0,
- IPPROTO_TCP,
- 0);
+ if(skb->protocol == ntohs(ETH_P_IP)) {
+ skb->nh.iph->tot_len = 0;
+ skb->nh.iph->check = 0;
+ skb->h.th->check =
+ ~csum_tcpudp_magic(skb->nh.iph->saddr,
+ skb->nh.iph->daddr,
+ 0,
+ IPPROTO_TCP,
+ 0);
+ cmd_length = E1000_TXD_CMD_IP;
+ ipcse = skb->h.raw - skb->data - 1;
+#ifdef NETIF_F_TSO_IPV6
+ } else if(skb->protocol == ntohs(ETH_P_IPV6)) {
+ skb->nh.ipv6h->payload_len = 0;
+ skb->h.th->check =
+ ~csum_ipv6_magic(&skb->nh.ipv6h->saddr,
+ &skb->nh.ipv6h->daddr,
+ 0,
+ IPPROTO_TCP,
+ 0);
+ ipcse = 0;
+#endif
+ }
ipcss = skb->nh.raw - skb->data;
ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data;
- ipcse = skb->h.raw - skb->data - 1;
tucss = skb->h.raw - skb->data;
tucso = (void *)&(skb->h.th->check) - (void *)skb->data;
tucse = 0;
cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
- E1000_TXD_CMD_IP | E1000_TXD_CMD_TCP |
- (skb->len - (hdr_len)));
+ E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
i = adapter->tx_ring.next_to_use;
context_desc = E1000_CONTEXT_DESC(adapter->tx_ring, i);
@@ -1760,6 +1995,15 @@
if(unlikely(mss && !nr_frags && size == len && size > 8))
size -= 4;
#endif
+ /* work-around for errata 10 and it applies
+ * to all controllers in PCI-X mode
+ * The fix is to make sure that the first descriptor of a
+ * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
+ */
+ if(unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
+ (size > 2015) && count == 0))
+ size = 2015;
+
/* Workaround for potential 82544 hang in PCI-X. Avoid
* terminating buffers within evenly-aligned dwords. */
if(unlikely(adapter->pcix_82544 &&
@@ -1840,7 +2084,10 @@
if(likely(tx_flags & E1000_TX_FLAGS_TSO)) {
txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
E1000_TXD_CMD_TSE;
- txd_upper |= (E1000_TXD_POPTS_IXSM | E1000_TXD_POPTS_TXSM) << 8;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+
+ if(likely(tx_flags & E1000_TX_FLAGS_IPV4))
+ txd_upper |= E1000_TXD_POPTS_IXSM << 8;
}
if(likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
@@ -1915,6 +2162,53 @@
return 0;
}
+#define MINIMUM_DHCP_PACKET_SIZE 282
+static inline int
+e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ uint16_t length, offset;
+ if(vlan_tx_tag_present(skb)) {
+ if(!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
+ ( adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
+ return 0;
+ }
+ if(htons(ETH_P_IP) == skb->protocol) {
+ const struct iphdr *ip = skb->nh.iph;
+ if(IPPROTO_UDP == ip->protocol) {
+ struct udphdr *udp = (struct udphdr *)(skb->h.uh);
+ if(ntohs(udp->dest) == 67) {
+ offset = (uint8_t *)udp + 8 - skb->data;
+ length = skb->len - offset;
+
+ return e1000_mng_write_dhcp_info(hw,
+ (uint8_t *)udp + 8, length);
+ }
+ }
+ } else if((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) {
+ struct ethhdr *eth = (struct ethhdr *) skb->data;
+ if((htons(ETH_P_IP) == eth->h_proto)) {
+ const struct iphdr *ip =
+ (struct iphdr *)((uint8_t *)skb->data+14);
+ if(IPPROTO_UDP == ip->protocol) {
+ struct udphdr *udp =
+ (struct udphdr *)((uint8_t *)ip +
+ (ip->ihl << 2));
+ if(ntohs(udp->dest) == 67) {
+ offset = (uint8_t *)udp + 8 - skb->data;
+ length = skb->len - offset;
+
+ return e1000_mng_write_dhcp_info(hw,
+ (uint8_t *)udp + 8,
+ length);
+ }
+ }
+ }
+ }
+ return 0;
+}
+
#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
static int
e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
@@ -1939,7 +2233,7 @@
#ifdef NETIF_F_TSO
mss = skb_shinfo(skb)->tso_size;
- /* The controller does a simple calculation to
+ /* The controller does a simple calculation to
* make sure there is enough room in the FIFO before
* initiating the DMA for each buffer. The calc is:
* 4 = ceil(buffer len/mss). To make sure we don't
@@ -1952,7 +2246,7 @@
if((mss) || (skb->ip_summed == CHECKSUM_HW))
count++;
- count++; /* for sentinel desc */
+ count++;
#else
if(skb->ip_summed == CHECKSUM_HW)
count++;
@@ -1962,6 +2256,13 @@
if(adapter->pcix_82544)
count++;
+ /* work-around for errata 10 and it applies to all controllers
+ * in PCI-X mode, so add one more descriptor to the count
+ */
+ if(unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
+ (len > 2015)))
+ count++;
+
nr_frags = skb_shinfo(skb)->nr_frags;
for(f = 0; f < nr_frags; f++)
count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
@@ -1975,6 +2276,9 @@
local_irq_restore(flags);
return NETDEV_TX_LOCKED;
}
+ if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) )
+ e1000_transfer_dhcp_info(adapter, skb);
+
/* need: count + 2 desc gap to keep tail from touching
* head, otherwise try next time */
@@ -2011,6 +2315,12 @@
else if(likely(e1000_tx_csum(adapter, skb)))
tx_flags |= E1000_TX_FLAGS_CSUM;
+ /* Old method was to assume IPv4 packet by default if TSO was enabled.
+ * 82573 hardware supports TSO capabilities for IPv6 as well...
+ * no longer assume, we must. */
+ if(likely(skb->protocol == ntohs(ETH_P_IP)))
+ tx_flags |= E1000_TX_FLAGS_IPV4;
+
e1000_tx_queue(adapter,
e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss),
tx_flags);
@@ -2077,7 +2387,6 @@
e1000_change_mtu(struct net_device *netdev, int new_mtu)
{
struct e1000_adapter *adapter = netdev->priv;
- int old_mtu = adapter->rx_buffer_len;
int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
@@ -2086,29 +2395,45 @@
return -EINVAL;
}
- if(max_frame <= MAXIMUM_ETHERNET_FRAME_SIZE) {
- adapter->rx_buffer_len = E1000_RXBUFFER_2048;
-
- } else if(adapter->hw.mac_type < e1000_82543) {
- DPRINTK(PROBE, ERR, "Jumbo Frames not supported on 82542\n");
+#define MAX_STD_JUMBO_FRAME_SIZE 9216
+ /* might want this to be bigger enum check... */
+ if (adapter->hw.mac_type == e1000_82573 &&
+ max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
+ "on 82573\n");
return -EINVAL;
-
- } else if(max_frame <= E1000_RXBUFFER_4096) {
- adapter->rx_buffer_len = E1000_RXBUFFER_4096;
-
- } else if(max_frame <= E1000_RXBUFFER_8192) {
- adapter->rx_buffer_len = E1000_RXBUFFER_8192;
-
- } else {
- adapter->rx_buffer_len = E1000_RXBUFFER_16384;
}
- if(old_mtu != adapter->rx_buffer_len && netif_running(netdev)) {
+ if(adapter->hw.mac_type > e1000_82547_rev_2) {
+ adapter->rx_buffer_len = max_frame;
+ E1000_ROUNDUP(adapter->rx_buffer_len, 1024);
+ } else {
+ if(unlikely((adapter->hw.mac_type < e1000_82543) &&
+ (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) {
+ DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
+ "on 82542\n");
+ return -EINVAL;
+
+ } else {
+ if(max_frame <= E1000_RXBUFFER_2048) {
+ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ } else if(max_frame <= E1000_RXBUFFER_4096) {
+ adapter->rx_buffer_len = E1000_RXBUFFER_4096;
+ } else if(max_frame <= E1000_RXBUFFER_8192) {
+ adapter->rx_buffer_len = E1000_RXBUFFER_8192;
+ } else if(max_frame <= E1000_RXBUFFER_16384) {
+ adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+ }
+ }
+ }
+
+ netdev->mtu = new_mtu;
+
+ if(netif_running(netdev)) {
e1000_down(adapter);
e1000_up(adapter);
}
- netdev->mtu = new_mtu;
adapter->hw.max_frame_size = max_frame;
return 0;
@@ -2199,6 +2524,17 @@
adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
}
+ if(hw->mac_type > e1000_82547_rev_2) {
+ adapter->stats.iac += E1000_READ_REG(hw, IAC);
+ adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
+ adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
+ adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
+ adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
+ adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
+ adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
+ adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
+ adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
+ }
/* Fill out the OS statistics structure */
@@ -2213,9 +2549,9 @@
adapter->net_stats.rx_errors = adapter->stats.rxerrc +
adapter->stats.crcerrs + adapter->stats.algnerrc +
- adapter->stats.rlec + adapter->stats.rnbc +
- adapter->stats.mpc + adapter->stats.cexterr;
- adapter->net_stats.rx_dropped = adapter->stats.rnbc;
+ adapter->stats.rlec + adapter->stats.mpc +
+ adapter->stats.cexterr;
+ adapter->net_stats.rx_dropped = adapter->stats.mpc;
adapter->net_stats.rx_length_errors = adapter->stats.rlec;
adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
@@ -2300,11 +2636,11 @@
*/
if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2){
atomic_inc(&adapter->irq_sem);
- E1000_WRITE_REG(&adapter->hw, IMC, ~0);
+ E1000_WRITE_REG(hw, IMC, ~0);
}
for(i = 0; i < E1000_MAX_INTR; i++)
- if(unlikely(!e1000_clean_rx_irq(adapter) &
+ if(unlikely(!adapter->clean_rx(adapter) &
!e1000_clean_tx_irq(adapter)))
break;
@@ -2328,16 +2664,15 @@
int work_to_do = min(*budget, netdev->quota);
int tx_cleaned;
int work_done = 0;
-
+
tx_cleaned = e1000_clean_tx_irq(adapter);
- e1000_clean_rx_irq(adapter, &work_done, work_to_do);
+ adapter->clean_rx(adapter, &work_done, work_to_do);
*budget -= work_done;
netdev->quota -= work_done;
- /* if no Tx and not enough Rx work done, exit the polling mode */
- if((!tx_cleaned && (work_done < work_to_do)) ||
- !netif_running(netdev)) {
+ /* If no Tx and no Rx work done, exit the polling mode */
+ if ((!tx_cleaned && (work_done == 0)) || !netif_running(netdev)) {
netif_rx_complete(netdev);
e1000_irq_enable(adapter);
return 0;
@@ -2367,11 +2702,10 @@
eop_desc = E1000_TX_DESC(*tx_ring, eop);
while(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
- /* pre-mature writeback of Tx descriptors */
- /* clear (free buffers and unmap pci_mapping) */
- /* previous_buffer_info */
+ /* Premature writeback of Tx descriptors clear (free buffers
+ * and unmap pci_mapping) previous_buffer_info */
if (likely(adapter->previous_buffer_info.skb != NULL)) {
- e1000_unmap_and_free_tx_resource(adapter,
+ e1000_unmap_and_free_tx_resource(adapter,
&adapter->previous_buffer_info);
}
@@ -2380,26 +2714,30 @@
buffer_info = &tx_ring->buffer_info[i];
cleaned = (i == eop);
- /* pre-mature writeback of Tx descriptors */
- /* save the cleaning of the this for the */
- /* next iteration */
- if (cleaned) {
- memcpy(&adapter->previous_buffer_info,
- buffer_info,
- sizeof(struct e1000_buffer));
- memset(buffer_info,
- 0,
- sizeof(struct e1000_buffer));
+#ifdef NETIF_F_TSO
+ if (!(netdev->features & NETIF_F_TSO)) {
+#endif
+ e1000_unmap_and_free_tx_resource(adapter,
+ buffer_info);
+#ifdef NETIF_F_TSO
} else {
- e1000_unmap_and_free_tx_resource(adapter,
- buffer_info);
+ if (cleaned) {
+ memcpy(&adapter->previous_buffer_info,
+ buffer_info,
+ sizeof(struct e1000_buffer));
+ memset(buffer_info, 0,
+ sizeof(struct e1000_buffer));
+ } else {
+ e1000_unmap_and_free_tx_resource(
+ adapter, buffer_info);
+ }
}
+#endif
tx_desc->buffer_addr = 0;
tx_desc->lower.data = 0;
tx_desc->upper.data = 0;
- cleaned = (i == eop);
if(unlikely(++i == tx_ring->count)) i = 0;
}
@@ -2416,57 +2754,107 @@
netif_wake_queue(netdev);
spin_unlock(&adapter->tx_lock);
-
if(adapter->detect_tx_hung) {
- /* detect a transmit hang in hardware, this serializes the
+
+ /* Detect a transmit hang in hardware, this serializes the
* check with the clearing of time_stamp and movement of i */
adapter->detect_tx_hung = FALSE;
- if(tx_ring->buffer_info[i].dma &&
- time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ) &&
- !(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_TXOFF))
- netif_stop_queue(netdev);
- }
+ if (tx_ring->buffer_info[i].dma &&
+ time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ)
+ && !(E1000_READ_REG(&adapter->hw, STATUS) &
+ E1000_STATUS_TXOFF)) {
+ /* detected Tx unit hang */
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+ DPRINTK(TX_ERR, ERR, "Detected Tx Unit Hang\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " dma <%llx>\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ E1000_READ_REG(&adapter->hw, TDH),
+ E1000_READ_REG(&adapter->hw, TDT),
+ tx_ring->next_to_use,
+ i,
+ tx_ring->buffer_info[i].dma,
+ tx_ring->buffer_info[i].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->upper.fields.status);
+ netif_stop_queue(netdev);
+ }
+ }
+#ifdef NETIF_F_TSO
+
+ if( unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
+ time_after(jiffies, adapter->previous_buffer_info.time_stamp + HZ)))
+ e1000_unmap_and_free_tx_resource(
+ adapter, &adapter->previous_buffer_info);
+
+#endif
return cleaned;
}
/**
* e1000_rx_checksum - Receive Checksum Offload for 82543
- * @adapter: board private structure
- * @rx_desc: receive descriptor
- * @sk_buff: socket buffer with received data
+ * @adapter: board private structure
+ * @status_err: receive descriptor status and error fields
+ * @csum: receive descriptor csum field
+ * @sk_buff: socket buffer with received data
**/
static inline void
e1000_rx_checksum(struct e1000_adapter *adapter,
- struct e1000_rx_desc *rx_desc,
- struct sk_buff *skb)
+ uint32_t status_err, uint32_t csum,
+ struct sk_buff *skb)
{
+ uint16_t status = (uint16_t)status_err;
+ uint8_t errors = (uint8_t)(status_err >> 24);
+ skb->ip_summed = CHECKSUM_NONE;
+
/* 82543 or newer only */
- if(unlikely((adapter->hw.mac_type < e1000_82543) ||
+ if(unlikely(adapter->hw.mac_type < e1000_82543)) return;
/* Ignore Checksum bit is set */
- (rx_desc->status & E1000_RXD_STAT_IXSM) ||
- /* TCP Checksum has not been calculated */
- (!(rx_desc->status & E1000_RXD_STAT_TCPCS)))) {
- skb->ip_summed = CHECKSUM_NONE;
+ if(unlikely(status & E1000_RXD_STAT_IXSM)) return;
+ /* TCP/UDP checksum error bit is set */
+ if(unlikely(errors & E1000_RXD_ERR_TCPE)) {
+ /* let the stack verify checksum errors */
+ adapter->hw_csum_err++;
return;
}
-
- /* At this point we know the hardware did the TCP checksum */
- /* now look at the TCP checksum error bit */
- if(rx_desc->errors & E1000_RXD_ERR_TCPE) {
- /* let the stack verify checksum errors */
- skb->ip_summed = CHECKSUM_NONE;
- adapter->hw_csum_err++;
+ /* TCP/UDP Checksum has not been calculated */
+ if(adapter->hw.mac_type <= e1000_82547_rev_2) {
+ if(!(status & E1000_RXD_STAT_TCPCS))
+ return;
} else {
+ if(!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
+ return;
+ }
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (likely(status & E1000_RXD_STAT_TCPCS)) {
/* TCP checksum is good */
skb->ip_summed = CHECKSUM_UNNECESSARY;
- adapter->hw_csum_good++;
+ } else if (adapter->hw.mac_type > e1000_82547_rev_2) {
+ /* IP fragment with UDP payload */
+ /* Hardware complements the payload checksum, so we undo it
+ * and then put the value in host order for further stack use.
+ */
+ csum = ntohl(csum ^ 0xFFFF);
+ skb->csum = csum;
+ skb->ip_summed = CHECKSUM_HW;
}
+ adapter->hw_csum_good++;
}
/**
- * e1000_clean_rx_irq - Send received data up the network stack
+ * e1000_clean_rx_irq - Send received data up the network stack; legacy
* @adapter: board private structure
**/
@@ -2513,7 +2901,7 @@
if(unlikely(!(rx_desc->status & E1000_RXD_STAT_EOP))) {
/* All receives must fit into a single buffer */
E1000_DBG("%s: Receive packet consumed multiple"
- " buffers\n", netdev->name);
+ " buffers\n", netdev->name);
dev_kfree_skb_irq(skb);
goto next_desc;
}
@@ -2539,15 +2927,17 @@
skb_put(skb, length - ETHERNET_FCS_SIZE);
/* Receive Checksum Offload */
- e1000_rx_checksum(adapter, rx_desc, skb);
-
+ e1000_rx_checksum(adapter,
+ (uint32_t)(rx_desc->status) |
+ ((uint32_t)(rx_desc->errors) << 24),
+ rx_desc->csum, skb);
skb->protocol = eth_type_trans(skb, netdev);
#ifdef CONFIG_E1000_NAPI
if(unlikely(adapter->vlgrp &&
(rx_desc->status & E1000_RXD_STAT_VP))) {
vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
- le16_to_cpu(rx_desc->special) &
- E1000_RXD_SPC_VLAN_MASK);
+ le16_to_cpu(rx_desc->special) &
+ E1000_RXD_SPC_VLAN_MASK);
} else {
netif_receive_skb(skb);
}
@@ -2570,16 +2960,142 @@
rx_desc = E1000_RX_DESC(*rx_ring, i);
}
-
rx_ring->next_to_clean = i;
-
- e1000_alloc_rx_buffers(adapter);
+ adapter->alloc_rx_buf(adapter);
return cleaned;
}
/**
- * e1000_alloc_rx_buffers - Replace used receive buffers
+ * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
+ * @adapter: board private structure
+ **/
+
+static boolean_t
+#ifdef CONFIG_E1000_NAPI
+e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, int *work_done,
+ int work_to_do)
+#else
+e1000_clean_rx_irq_ps(struct e1000_adapter *adapter)
+#endif
+{
+ struct e1000_desc_ring *rx_ring = &adapter->rx_ring;
+ union e1000_rx_desc_packet_split *rx_desc;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_buffer *buffer_info;
+ struct e1000_ps_page *ps_page;
+ struct e1000_ps_page_dma *ps_page_dma;
+ struct sk_buff *skb;
+ unsigned int i, j;
+ uint32_t length, staterr;
+ boolean_t cleaned = FALSE;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
+ staterr = rx_desc->wb.middle.status_error;
+
+ while(staterr & E1000_RXD_STAT_DD) {
+ buffer_info = &rx_ring->buffer_info[i];
+ ps_page = &rx_ring->ps_page[i];
+ ps_page_dma = &rx_ring->ps_page_dma[i];
+#ifdef CONFIG_E1000_NAPI
+ if(unlikely(*work_done >= work_to_do))
+ break;
+ (*work_done)++;
+#endif
+ cleaned = TRUE;
+ pci_unmap_single(pdev, buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+
+ skb = buffer_info->skb;
+
+ if(unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
+ E1000_DBG("%s: Packet Split buffers didn't pick up"
+ " the full packet\n", netdev->name);
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+
+ if(unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+
+ length = le16_to_cpu(rx_desc->wb.middle.length0);
+
+ if(unlikely(!length)) {
+ E1000_DBG("%s: Last part of the packet spanning"
+ " multiple descriptors\n", netdev->name);
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+
+ /* Good Receive */
+ skb_put(skb, length);
+
+ for(j = 0; j < PS_PAGE_BUFFERS; j++) {
+ if(!(length = le16_to_cpu(rx_desc->wb.upper.length[j])))
+ break;
+
+ pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ ps_page_dma->ps_page_dma[j] = 0;
+ skb_shinfo(skb)->frags[j].page =
+ ps_page->ps_page[j];
+ ps_page->ps_page[j] = NULL;
+ skb_shinfo(skb)->frags[j].page_offset = 0;
+ skb_shinfo(skb)->frags[j].size = length;
+ skb_shinfo(skb)->nr_frags++;
+ skb->len += length;
+ skb->data_len += length;
+ }
+
+ e1000_rx_checksum(adapter, staterr,
+ rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ skb->protocol = eth_type_trans(skb, netdev);
+
+#ifdef HAVE_RX_ZERO_COPY
+ if(likely(rx_desc->wb.upper.header_status &
+ E1000_RXDPS_HDRSTAT_HDRSP))
+ skb_shinfo(skb)->zero_copy = TRUE;
+#endif
+#ifdef CONFIG_E1000_NAPI
+ if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+ le16_to_cpu(rx_desc->wb.middle.vlan &
+ E1000_RXD_SPC_VLAN_MASK));
+ } else {
+ netif_receive_skb(skb);
+ }
+#else /* CONFIG_E1000_NAPI */
+ if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
+ vlan_hwaccel_rx(skb, adapter->vlgrp,
+ le16_to_cpu(rx_desc->wb.middle.vlan &
+ E1000_RXD_SPC_VLAN_MASK));
+ } else {
+ netif_rx(skb);
+ }
+#endif /* CONFIG_E1000_NAPI */
+ netdev->last_rx = jiffies;
+
+next_desc:
+ rx_desc->wb.middle.status_error &= ~0xFF;
+ buffer_info->skb = NULL;
+ if(unlikely(++i == rx_ring->count)) i = 0;
+
+ rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
+ staterr = rx_desc->wb.middle.status_error;
+ }
+ rx_ring->next_to_clean = i;
+ adapter->alloc_rx_buf(adapter);
+
+ return cleaned;
+}
+
+/**
+ * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
* @adapter: address of board private structure
**/
@@ -2592,43 +3108,43 @@
struct e1000_rx_desc *rx_desc;
struct e1000_buffer *buffer_info;
struct sk_buff *skb;
- unsigned int i, bufsz;
+ unsigned int i;
+ unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
i = rx_ring->next_to_use;
buffer_info = &rx_ring->buffer_info[i];
while(!buffer_info->skb) {
- bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
-
skb = dev_alloc_skb(bufsz);
+
if(unlikely(!skb)) {
/* Better luck next round */
break;
}
- /* fix for errata 23, cant cross 64kB boundary */
+ /* Fix for errata 23, can't cross 64kB boundary */
if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
struct sk_buff *oldskb = skb;
- DPRINTK(RX_ERR,ERR,
- "skb align check failed: %u bytes at %p\n",
- bufsz, skb->data);
- /* try again, without freeing the previous */
+ DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
+ "at %p\n", bufsz, skb->data);
+ /* Try again, without freeing the previous */
skb = dev_alloc_skb(bufsz);
+ /* Failed allocation, critical failure */
if (!skb) {
dev_kfree_skb(oldskb);
break;
}
+
if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
/* give up */
dev_kfree_skb(skb);
dev_kfree_skb(oldskb);
break; /* while !buffer_info->skb */
} else {
- /* move on with the new one */
+ /* Use new allocation */
dev_kfree_skb(oldskb);
}
}
-
/* Make buffer alignment 2 beyond a 16 byte boundary
* this will result in a 16 byte aligned IP header after
* the 14 byte MAC header is removed
@@ -2644,25 +3160,23 @@
adapter->rx_buffer_len,
PCI_DMA_FROMDEVICE);
- /* fix for errata 23, cant cross 64kB boundary */
- if(!e1000_check_64k_bound(adapter,
- (void *)(unsigned long)buffer_info->dma,
- adapter->rx_buffer_len)) {
- DPRINTK(RX_ERR,ERR,
- "dma align check failed: %u bytes at %ld\n",
- adapter->rx_buffer_len, (unsigned long)buffer_info->dma);
-
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter,
+ (void *)(unsigned long)buffer_info->dma,
+ adapter->rx_buffer_len)) {
+ DPRINTK(RX_ERR, ERR,
+ "dma align check failed: %u bytes at %p\n",
+ adapter->rx_buffer_len,
+ (void *)(unsigned long)buffer_info->dma);
dev_kfree_skb(skb);
buffer_info->skb = NULL;
- pci_unmap_single(pdev,
- buffer_info->dma,
+ pci_unmap_single(pdev, buffer_info->dma,
adapter->rx_buffer_len,
PCI_DMA_FROMDEVICE);
break; /* while !buffer_info->skb */
}
-
rx_desc = E1000_RX_DESC(*rx_ring, i);
rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
@@ -2672,7 +3186,6 @@
* applicable for weak-ordered memory model archs,
* such as IA-64). */
wmb();
-
E1000_WRITE_REG(&adapter->hw, RDT, i);
}
@@ -2684,6 +3197,95 @@
}
/**
+ * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
+ * @adapter: address of board private structure
+ **/
+
+static void
+e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter)
+{
+ struct e1000_desc_ring *rx_ring = &adapter->rx_ring;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ union e1000_rx_desc_packet_split *rx_desc;
+ struct e1000_buffer *buffer_info;
+ struct e1000_ps_page *ps_page;
+ struct e1000_ps_page_dma *ps_page_dma;
+ struct sk_buff *skb;
+ unsigned int i, j;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+ ps_page = &rx_ring->ps_page[i];
+ ps_page_dma = &rx_ring->ps_page_dma[i];
+
+ while(!buffer_info->skb) {
+ rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
+
+ for(j = 0; j < PS_PAGE_BUFFERS; j++) {
+ if(unlikely(!ps_page->ps_page[j])) {
+ ps_page->ps_page[j] =
+ alloc_page(GFP_ATOMIC);
+ if(unlikely(!ps_page->ps_page[j]))
+ goto no_buffers;
+ ps_page_dma->ps_page_dma[j] =
+ pci_map_page(pdev,
+ ps_page->ps_page[j],
+ 0, PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ }
+ /* Refresh the desc even if buffer_addrs didn't
+ * change because each write-back erases this info.
+ */
+ rx_desc->read.buffer_addr[j+1] =
+ cpu_to_le64(ps_page_dma->ps_page_dma[j]);
+ }
+
+ skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN);
+
+ if(unlikely(!skb))
+ break;
+
+ /* Make buffer alignment 2 beyond a 16 byte boundary
+ * this will result in a 16 byte aligned IP header after
+ * the 14 byte MAC header is removed
+ */
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ skb->dev = netdev;
+
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_ps_bsize0;
+ buffer_info->dma = pci_map_single(pdev, skb->data,
+ adapter->rx_ps_bsize0,
+ PCI_DMA_FROMDEVICE);
+
+ rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
+
+ if(unlikely((i & ~(E1000_RX_BUFFER_WRITE - 1)) == i)) {
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ /* Hardware increments by 16 bytes, but packet split
+ * descriptors are 32 bytes...so we increment tail
+ * twice as much.
+ */
+ E1000_WRITE_REG(&adapter->hw, RDT, i<<1);
+ }
+
+ if(unlikely(++i == rx_ring->count)) i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ ps_page = &rx_ring->ps_page[i];
+ ps_page_dma = &rx_ring->ps_page_dma[i];
+ }
+
+no_buffers:
+ rx_ring->next_to_use = i;
+}
+
+/**
* e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
* @adapter:
**/
@@ -2856,9 +3458,10 @@
e1000_pci_set_mwi(struct e1000_hw *hw)
{
struct e1000_adapter *adapter = hw->back;
+ int ret_val = pci_set_mwi(adapter->pdev);
- int ret;
- ret = pci_set_mwi(adapter->pdev);
+ if(ret_val)
+ DPRINTK(PROBE, ERR, "Error in setting MWI\n");
}
void
@@ -2917,6 +3520,7 @@
rctl |= E1000_RCTL_VFE;
rctl &= ~E1000_RCTL_CFIEN;
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ e1000_update_mng_vlan(adapter);
} else {
/* disable VLAN tag insert/strip */
ctrl = E1000_READ_REG(&adapter->hw, CTRL);
@@ -2927,6 +3531,10 @@
rctl = E1000_READ_REG(&adapter->hw, RCTL);
rctl &= ~E1000_RCTL_VFE;
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ if(adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ }
}
e1000_irq_enable(adapter);
@@ -2937,7 +3545,10 @@
{
struct e1000_adapter *adapter = netdev->priv;
uint32_t vfta, index;
-
+ if((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ (vid == adapter->mng_vlan_id))
+ return;
/* add VID to filter table */
index = (vid >> 5) & 0x7F;
vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
@@ -2958,6 +3569,10 @@
e1000_irq_enable(adapter);
+ if((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ (vid == adapter->mng_vlan_id))
+ return;
/* remove VID from filter table */
index = (vid >> 5) & 0x7F;
vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
@@ -3004,8 +3619,7 @@
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
- DPRINTK(PROBE, ERR,
- "Unsupported Speed/Duplexity configuration\n");
+ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
return -EINVAL;
}
return 0;
@@ -3033,7 +3647,7 @@
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev->priv;
- uint32_t ctrl, ctrl_ext, rctl, manc, status;
+ uint32_t ctrl, ctrl_ext, rctl, manc, status, swsm;
uint32_t wufc = adapter->wol;
netif_device_detach(netdev);
@@ -3075,6 +3689,9 @@
E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
}
+ /* Allow time for pending master requests to run */
+ e1000_disable_pciex_master(&adapter->hw);
+
E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
pci_enable_wake(pdev, 3, 1);
@@ -3099,6 +3716,16 @@
}
}
+ switch(adapter->hw.mac_type) {
+ case e1000_82573:
+ swsm = E1000_READ_REG(&adapter->hw, SWSM);
+ E1000_WRITE_REG(&adapter->hw, SWSM,
+ swsm & ~E1000_SWSM_DRV_LOAD);
+ break;
+ default:
+ break;
+ }
+
pci_disable_device(pdev);
state = (state > 0) ? 3 : 0;
@@ -3113,13 +3740,12 @@
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev->priv;
- uint32_t manc, ret;
+ uint32_t manc, ret, swsm;
pci_set_power_state(pdev, 0);
pci_restore_state(pdev);
ret = pci_enable_device(pdev);
- if (pdev->is_busmaster)
- pci_set_master(pdev);
+ pci_set_master(pdev);
pci_enable_wake(pdev, 3, 0);
pci_enable_wake(pdev, 4, 0); /* 4 == D3 cold */
@@ -3139,10 +3765,19 @@
E1000_WRITE_REG(&adapter->hw, MANC, manc);
}
+ switch(adapter->hw.mac_type) {
+ case e1000_82573:
+ swsm = E1000_READ_REG(&adapter->hw, SWSM);
+ E1000_WRITE_REG(&adapter->hw, SWSM,
+ swsm | E1000_SWSM_DRV_LOAD);
+ break;
+ default:
+ break;
+ }
+
return 0;
}
#endif
-
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
* Polling 'interrupt' - used by things like netconsole to send skbs
@@ -3150,7 +3785,7 @@
* the interrupt routine is executing.
*/
static void
-e1000_netpoll (struct net_device *netdev)
+e1000_netpoll(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev->priv;
disable_irq(adapter->pdev->irq);
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h
index 970c656..aac64de 100644
--- a/drivers/net/e1000/e1000_osdep.h
+++ b/drivers/net/e1000/e1000_osdep.h
@@ -1,7 +1,7 @@
/*******************************************************************************
- Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
+ Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
@@ -42,7 +42,12 @@
#include <linux/sched.h>
#ifndef msec_delay
-#define msec_delay(x) msleep(x)
+#define msec_delay(x) do { if(in_interrupt()) { \
+ /* Don't mdelay in interrupt context! */ \
+ BUG(); \
+ } else { \
+ msleep(x); \
+ } } while(0)
/* Some workarounds require millisecond delays and are run during interrupt
* context. Most notably, when establishing link, the phy may need tweaking
@@ -96,6 +101,29 @@
(((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
((offset) << 2)))
+#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
+#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
+
+#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
+ writew((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1))))
+
+#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
+ readw((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1)))
+
+#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
+ writeb((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset))))
+
+#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
+ readb((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset)))
+
#define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS)
#endif /* _E1000_OSDEP_H_ */
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index e914d09..676247f 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -1,7 +1,7 @@
/*******************************************************************************
- Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
+ Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
@@ -478,7 +478,6 @@
DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
opt.name);
break;
- case -1:
default:
e1000_validate_option(&adapter->itr, &opt,
adapter);
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index cda48c5..4ebcd05 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -81,6 +81,7 @@
* cause DMA to kfree'd memory.
* 0.31: 14 Nov 2004: ethtool support for getting/setting link
* capabilities.
+ * 0.32: 16 Apr 2005: RX_ERROR4 handling added.
*
* Known bugs:
* We suspect that on some hardware no TX done interrupts are generated.
@@ -92,7 +93,7 @@
* DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
* superfluous timer interrupts from the nic.
*/
-#define FORCEDETH_VERSION "0.31"
+#define FORCEDETH_VERSION "0.32"
#define DRV_NAME "forcedeth"
#include <linux/module.h>
@@ -109,6 +110,7 @@
#include <linux/mii.h>
#include <linux/random.h>
#include <linux/init.h>
+#include <linux/if_vlan.h>
#include <asm/irq.h>
#include <asm/io.h>
@@ -1013,6 +1015,59 @@
spin_unlock_irq(&np->lock);
}
+/*
+ * Called when the nic notices a mismatch between the actual data len on the
+ * wire and the len indicated in the 802 header
+ */
+static int nv_getlen(struct net_device *dev, void *packet, int datalen)
+{
+ int hdrlen; /* length of the 802 header */
+ int protolen; /* length as stored in the proto field */
+
+ /* 1) calculate len according to header */
+ if ( ((struct vlan_ethhdr *)packet)->h_vlan_proto == __constant_htons(ETH_P_8021Q)) {
+ protolen = ntohs( ((struct vlan_ethhdr *)packet)->h_vlan_encapsulated_proto );
+ hdrlen = VLAN_HLEN;
+ } else {
+ protolen = ntohs( ((struct ethhdr *)packet)->h_proto);
+ hdrlen = ETH_HLEN;
+ }
+ dprintk(KERN_DEBUG "%s: nv_getlen: datalen %d, protolen %d, hdrlen %d\n",
+ dev->name, datalen, protolen, hdrlen);
+ if (protolen > ETH_DATA_LEN)
+ return datalen; /* Value in proto field not a len, no checks possible */
+
+ protolen += hdrlen;
+ /* consistency checks: */
+ if (datalen > ETH_ZLEN) {
+ if (datalen >= protolen) {
+ /* more data on wire than in 802 header, trim of
+ * additional data.
+ */
+ dprintk(KERN_DEBUG "%s: nv_getlen: accepting %d bytes.\n",
+ dev->name, protolen);
+ return protolen;
+ } else {
+ /* less data on wire than mentioned in header.
+ * Discard the packet.
+ */
+ dprintk(KERN_DEBUG "%s: nv_getlen: discarding long packet.\n",
+ dev->name);
+ return -1;
+ }
+ } else {
+ /* short packet. Accept only if 802 values are also short */
+ if (protolen > ETH_ZLEN) {
+ dprintk(KERN_DEBUG "%s: nv_getlen: discarding short packet.\n",
+ dev->name);
+ return -1;
+ }
+ dprintk(KERN_DEBUG "%s: nv_getlen: accepting %d bytes.\n",
+ dev->name, datalen);
+ return datalen;
+ }
+}
+
static void nv_rx_process(struct net_device *dev)
{
struct fe_priv *np = get_nvpriv(dev);
@@ -1064,7 +1119,7 @@
np->stats.rx_errors++;
goto next_pkt;
}
- if (Flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3|NV_RX_ERROR4)) {
+ if (Flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3)) {
np->stats.rx_errors++;
goto next_pkt;
}
@@ -1078,22 +1133,24 @@
np->stats.rx_errors++;
goto next_pkt;
}
- if (Flags & NV_RX_ERROR) {
- /* framing errors are soft errors, the rest is fatal. */
- if (Flags & NV_RX_FRAMINGERR) {
- if (Flags & NV_RX_SUBSTRACT1) {
- len--;
- }
- } else {
+ if (Flags & NV_RX_ERROR4) {
+ len = nv_getlen(dev, np->rx_skbuff[i]->data, len);
+ if (len < 0) {
np->stats.rx_errors++;
goto next_pkt;
}
}
+ /* framing errors are soft errors. */
+ if (Flags & NV_RX_FRAMINGERR) {
+ if (Flags & NV_RX_SUBSTRACT1) {
+ len--;
+ }
+ }
} else {
if (!(Flags & NV_RX2_DESCRIPTORVALID))
goto next_pkt;
- if (Flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3|NV_RX2_ERROR4)) {
+ if (Flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3)) {
np->stats.rx_errors++;
goto next_pkt;
}
@@ -1107,17 +1164,19 @@
np->stats.rx_errors++;
goto next_pkt;
}
- if (Flags & NV_RX2_ERROR) {
- /* framing errors are soft errors, the rest is fatal. */
- if (Flags & NV_RX2_FRAMINGERR) {
- if (Flags & NV_RX2_SUBSTRACT1) {
- len--;
- }
- } else {
+ if (Flags & NV_RX2_ERROR4) {
+ len = nv_getlen(dev, np->rx_skbuff[i]->data, len);
+ if (len < 0) {
np->stats.rx_errors++;
goto next_pkt;
}
}
+ /* framing errors are soft errors */
+ if (Flags & NV_RX2_FRAMINGERR) {
+ if (Flags & NV_RX2_SUBSTRACT1) {
+ len--;
+ }
+ }
Flags &= NV_RX2_CHECKSUMMASK;
if (Flags == NV_RX2_CHECKSUMOK1 ||
Flags == NV_RX2_CHECKSUMOK2 ||
@@ -1480,6 +1539,13 @@
enable_irq(dev->irq);
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void nv_poll_controller(struct net_device *dev)
+{
+ nv_do_nic_poll((unsigned long) dev);
+}
+#endif
+
static void nv_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
struct fe_priv *np = get_nvpriv(dev);
@@ -1962,6 +2028,9 @@
dev->get_stats = nv_get_stats;
dev->change_mtu = nv_change_mtu;
dev->set_multicast_list = nv_set_multicast;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = nv_poll_controller;
+#endif
SET_ETHTOOL_OPS(dev, &ops);
dev->tx_timeout = nv_tx_timeout;
dev->watchdog_timeo = NV_WATCHDOG_TIMEO;
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 1c563f9..a7f15d9 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -374,29 +374,6 @@
}
/* --------------------------------------------------------------------- */
-/*
- * high performance HDLC encoder
- * yes, it's ugly, but generates pretty good code
- */
-
-#define ENCODEITERA(j) \
-({ \
- if (!(notbitstream & (0x1f0 << j))) \
- goto stuff##j; \
- encodeend##j: ; \
-})
-
-#define ENCODEITERB(j) \
-({ \
- stuff##j: \
- bitstream &= ~(0x100 << j); \
- bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | \
- ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); \
- numbit++; \
- notbitstream = ~bitstream; \
- goto encodeend##j; \
-})
-
static void encode_hdlc(struct baycom_state *bc)
{
@@ -405,6 +382,7 @@
int pkt_len;
unsigned bitstream, notbitstream, bitbuf, numbit, crc;
unsigned char crcarr[2];
+ int j;
if (bc->hdlctx.bufcnt > 0)
return;
@@ -429,24 +407,14 @@
pkt_len--;
if (!pkt_len)
bp = crcarr;
- ENCODEITERA(0);
- ENCODEITERA(1);
- ENCODEITERA(2);
- ENCODEITERA(3);
- ENCODEITERA(4);
- ENCODEITERA(5);
- ENCODEITERA(6);
- ENCODEITERA(7);
- goto enditer;
- ENCODEITERB(0);
- ENCODEITERB(1);
- ENCODEITERB(2);
- ENCODEITERB(3);
- ENCODEITERB(4);
- ENCODEITERB(5);
- ENCODEITERB(6);
- ENCODEITERB(7);
- enditer:
+ for (j = 0; j < 8; j++)
+ if (unlikely(!(notbitstream & (0x1f0 << j)))) {
+ bitstream &= ~(0x100 << j);
+ bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |
+ ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);
+ numbit++;
+ notbitstream = ~bitstream;
+ }
numbit += 8;
while (numbit >= 8) {
*wp++ = bitbuf;
@@ -610,37 +578,6 @@
bc->stats.rx_packets++;
}
-#define DECODEITERA(j) \
-({ \
- if (!(notbitstream & (0x0fc << j))) /* flag or abort */ \
- goto flgabrt##j; \
- if ((bitstream & (0x1f8 << j)) == (0xf8 << j)) /* stuffed bit */ \
- goto stuff##j; \
- enditer##j: ; \
-})
-
-#define DECODEITERB(j) \
-({ \
- flgabrt##j: \
- if (!(notbitstream & (0x1fc << j))) { /* abort received */ \
- state = 0; \
- goto enditer##j; \
- } \
- if ((bitstream & (0x1fe << j)) != (0x0fc << j)) /* flag received */ \
- goto enditer##j; \
- if (state) \
- do_rxpacket(dev); \
- bc->hdlcrx.bufcnt = 0; \
- bc->hdlcrx.bufptr = bc->hdlcrx.buf; \
- state = 1; \
- numbits = 7-j; \
- goto enditer##j; \
- stuff##j: \
- numbits--; \
- bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); \
- goto enditer##j; \
-})
-
static int receive(struct net_device *dev, int cnt)
{
struct baycom_state *bc = netdev_priv(dev);
@@ -649,6 +586,7 @@
unsigned char tmp[128];
unsigned char *cp;
int cnt2, ret = 0;
+ int j;
numbits = bc->hdlcrx.numbits;
state = bc->hdlcrx.state;
@@ -669,24 +607,32 @@
bitbuf |= (*cp) << 8;
numbits += 8;
notbitstream = ~bitstream;
- DECODEITERA(0);
- DECODEITERA(1);
- DECODEITERA(2);
- DECODEITERA(3);
- DECODEITERA(4);
- DECODEITERA(5);
- DECODEITERA(6);
- DECODEITERA(7);
- goto enddec;
- DECODEITERB(0);
- DECODEITERB(1);
- DECODEITERB(2);
- DECODEITERB(3);
- DECODEITERB(4);
- DECODEITERB(5);
- DECODEITERB(6);
- DECODEITERB(7);
- enddec:
+ for (j = 0; j < 8; j++) {
+
+ /* flag or abort */
+ if (unlikely(!(notbitstream & (0x0fc << j)))) {
+
+ /* abort received */
+ if (!(notbitstream & (0x1fc << j)))
+ state = 0;
+
+ /* not flag received */
+ else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) {
+ if (state)
+ do_rxpacket(dev);
+ bc->hdlcrx.bufcnt = 0;
+ bc->hdlcrx.bufptr = bc->hdlcrx.buf;
+ state = 1;
+ numbits = 7-j;
+ }
+ }
+
+ /* stuffed bit */
+ else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
+ numbits--;
+ bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);
+ }
+ }
while (state && numbits >= 8) {
if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) {
state = 0;
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index ab44358..6482d99 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -1595,7 +1595,7 @@
static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct ocp_enet_private *fep = dev->priv;
- uint *data = (uint *) & rq->ifr_ifru;
+ uint16_t *data = (uint16_t *) & rq->ifr_ifru;
switch (cmd) {
case SIOCGMIIPHY:
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 855f8b2..13ed8dc 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -924,7 +924,7 @@
spin_lock_irqsave(&cnx->lock, flags);
- if (! cnx->state & VETH_STATE_READY)
+ if (! (cnx->state & VETH_STATE_READY))
goto drop;
if ((skb->len - 14) > VETH_MAX_MTU)
@@ -1023,6 +1023,8 @@
lpmask = veth_transmit_to_many(skb, lpmask, dev);
+ dev->trans_start = jiffies;
+
if (! lpmask) {
dev_kfree_skb(skb);
} else {
@@ -1262,13 +1264,18 @@
vlan = skb->data[9];
dev = veth_dev[vlan];
- if (! dev)
- /* Some earlier versions of the driver sent
- broadcasts down all connections, even to
- lpars that weren't on the relevant vlan.
- So ignore packets belonging to a vlan we're
- not on. */
+ if (! dev) {
+ /*
+ * Some earlier versions of the driver sent
+ * broadcasts down all connections, even to lpars
+ * that weren't on the relevant vlan. So ignore
+ * packets belonging to a vlan we're not on.
+ * We can also be here if we receive packets while
+ * the driver is going down, because then dev is NULL.
+ */
+ dev_kfree_skb_irq(skb);
continue;
+ }
port = (struct veth_port *)dev->priv;
dest = *((u64 *) skb->data) & 0xFFFFFFFFFFFF0000;
@@ -1381,18 +1388,25 @@
{
int i;
- vio_unregister_driver(&veth_driver);
+ /* Stop the queues first to stop any new packets being sent. */
+ for (i = 0; i < HVMAXARCHITECTEDVIRTUALLANS; i++)
+ if (veth_dev[i])
+ netif_stop_queue(veth_dev[i]);
+ /* Stop the connections before we unregister the driver. This
+ * ensures there's no skbs lying around holding the device open. */
for (i = 0; i < HVMAXARCHITECTEDLPS; ++i)
veth_stop_connection(i);
HvLpEvent_unregisterHandler(HvLpEvent_Type_VirtualLan);
/* Hypervisor callbacks may have scheduled more work while we
- * were destroying connections. Now that we've disconnected from
+ * were stoping connections. Now that we've disconnected from
* the hypervisor make sure everything's finished. */
flush_scheduled_work();
+ vio_unregister_driver(&veth_driver);
+
for (i = 0; i < HVMAXARCHITECTEDLPS; ++i)
veth_destroy_connection(i);
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index 26c4f15..f8d3385 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -110,7 +110,7 @@
#define IXGB_TX_QUEUE_WAKE 16
/* How many Rx Buffers do we bundle into one write to the hardware ? */
-#define IXGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+#define IXGB_RX_BUFFER_WRITE 4 /* Must be power of 2 */
/* only works for sizes that are powers of 2 */
#define IXGB_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1)))
diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c
index 653e99f..3aae110 100644
--- a/drivers/net/ixgb/ixgb_ee.c
+++ b/drivers/net/ixgb/ixgb_ee.c
@@ -411,7 +411,7 @@
ixgb_cleanup_eeprom(hw);
/* clear the init_ctrl_reg_1 to signify that the cache is invalidated */
- ee_map->init_ctrl_reg_1 = EEPROM_ICW1_SIGNATURE_CLEAR;
+ ee_map->init_ctrl_reg_1 = le16_to_cpu(EEPROM_ICW1_SIGNATURE_CLEAR);
return;
}
@@ -483,7 +483,7 @@
DEBUGOUT("ixgb_ee: Checksum invalid.\n");
/* clear the init_ctrl_reg_1 to signify that the cache is
* invalidated */
- ee_map->init_ctrl_reg_1 = EEPROM_ICW1_SIGNATURE_CLEAR;
+ ee_map->init_ctrl_reg_1 = le16_to_cpu(EEPROM_ICW1_SIGNATURE_CLEAR);
return (FALSE);
}
@@ -579,7 +579,7 @@
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return(ee_map->compatibility);
+ return (le16_to_cpu(ee_map->compatibility));
return(0);
}
@@ -616,7 +616,7 @@
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return(ee_map->init_ctrl_reg_1);
+ return (le16_to_cpu(ee_map->init_ctrl_reg_1));
return(0);
}
@@ -635,7 +635,7 @@
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return(ee_map->init_ctrl_reg_2);
+ return (le16_to_cpu(ee_map->init_ctrl_reg_2));
return(0);
}
@@ -654,7 +654,7 @@
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return(ee_map->subsystem_id);
+ return (le16_to_cpu(ee_map->subsystem_id));
return(0);
}
@@ -673,7 +673,7 @@
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return(ee_map->subvendor_id);
+ return (le16_to_cpu(ee_map->subvendor_id));
return(0);
}
@@ -692,7 +692,7 @@
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return(ee_map->device_id);
+ return (le16_to_cpu(ee_map->device_id));
return(0);
}
@@ -711,7 +711,7 @@
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return(ee_map->vendor_id);
+ return (le16_to_cpu(ee_map->vendor_id));
return(0);
}
@@ -730,7 +730,7 @@
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return(ee_map->swdpins_reg);
+ return (le16_to_cpu(ee_map->swdpins_reg));
return(0);
}
@@ -749,7 +749,7 @@
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return(ee_map->d3_power);
+ return (le16_to_cpu(ee_map->d3_power));
return(0);
}
@@ -768,7 +768,7 @@
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
- return(ee_map->d0_power);
+ return (le16_to_cpu(ee_map->d0_power));
return(0);
}
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index aea10e8..3fa1138 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -252,7 +252,9 @@
uint32_t *reg_start = reg;
uint8_t i;
- regs->version = (adapter->hw.device_id << 16) | adapter->hw.subsystem_id;
+ /* the 1 (one) below indicates an attempt at versioning, if the
+ * interface in ethtool or the driver this 1 should be incremented */
+ regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id;
/* General Registers */
*reg++ = IXGB_READ_REG(hw, CTRL0); /* 0 */
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 7d26623..35f6a7c 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -47,7 +47,7 @@
#else
#define DRIVERNAPI "-NAPI"
#endif
-char ixgb_driver_version[] = "1.0.90-k2"DRIVERNAPI;
+char ixgb_driver_version[] = "1.0.95-k2"DRIVERNAPI;
char ixgb_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
/* ixgb_pci_tbl - PCI Device ID Table
@@ -103,6 +103,7 @@
static int ixgb_set_mac(struct net_device *netdev, void *p);
static irqreturn_t ixgb_intr(int irq, void *data, struct pt_regs *regs);
static boolean_t ixgb_clean_tx_irq(struct ixgb_adapter *adapter);
+
#ifdef CONFIG_IXGB_NAPI
static int ixgb_clean(struct net_device *netdev, int *budget);
static boolean_t ixgb_clean_rx_irq(struct ixgb_adapter *adapter,
@@ -120,33 +121,20 @@
static void ixgb_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
static void ixgb_restore_vlan(struct ixgb_adapter *adapter);
-static int ixgb_notify_reboot(struct notifier_block *, unsigned long event,
- void *ptr);
-static int ixgb_suspend(struct pci_dev *pdev, uint32_t state);
-
#ifdef CONFIG_NET_POLL_CONTROLLER
/* for netdump / net console */
static void ixgb_netpoll(struct net_device *dev);
#endif
-struct notifier_block ixgb_notifier_reboot = {
- .notifier_call = ixgb_notify_reboot,
- .next = NULL,
- .priority = 0
-};
-
/* Exported from other modules */
extern void ixgb_check_options(struct ixgb_adapter *adapter);
static struct pci_driver ixgb_driver = {
- .name = ixgb_driver_name,
+ .name = ixgb_driver_name,
.id_table = ixgb_pci_tbl,
- .probe = ixgb_probe,
- .remove = __devexit_p(ixgb_remove),
- /* Power Managment Hooks */
- .suspend = NULL,
- .resume = NULL
+ .probe = ixgb_probe,
+ .remove = __devexit_p(ixgb_remove),
};
MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
@@ -169,17 +157,12 @@
static int __init
ixgb_init_module(void)
{
- int ret;
printk(KERN_INFO "%s - version %s\n",
ixgb_driver_string, ixgb_driver_version);
printk(KERN_INFO "%s\n", ixgb_copyright);
- ret = pci_module_init(&ixgb_driver);
- if(ret >= 0) {
- register_reboot_notifier(&ixgb_notifier_reboot);
- }
- return ret;
+ return pci_module_init(&ixgb_driver);
}
module_init(ixgb_init_module);
@@ -194,7 +177,6 @@
static void __exit
ixgb_exit_module(void)
{
- unregister_reboot_notifier(&ixgb_notifier_reboot);
pci_unregister_driver(&ixgb_driver);
}
@@ -224,8 +206,8 @@
{
if(atomic_dec_and_test(&adapter->irq_sem)) {
IXGB_WRITE_REG(&adapter->hw, IMS,
- IXGB_INT_RXT0 | IXGB_INT_RXDMT0 | IXGB_INT_TXDW |
- IXGB_INT_RXO | IXGB_INT_LSC);
+ IXGB_INT_RXT0 | IXGB_INT_RXDMT0 | IXGB_INT_TXDW |
+ IXGB_INT_LSC);
IXGB_WRITE_FLUSH(&adapter->hw);
}
}
@@ -1209,10 +1191,10 @@
| IXGB_CONTEXT_DESC_CMD_TSE
| IXGB_CONTEXT_DESC_CMD_IP
| IXGB_CONTEXT_DESC_CMD_TCP
- | IXGB_CONTEXT_DESC_CMD_RS
| IXGB_CONTEXT_DESC_CMD_IDE
| (skb->len - (hdr_len)));
+
if(++i == adapter->tx_ring.count) i = 0;
adapter->tx_ring.next_to_use = i;
@@ -1247,8 +1229,7 @@
context_desc->mss = 0;
context_desc->cmd_type_len =
cpu_to_le32(IXGB_CONTEXT_DESC_TYPE
- | IXGB_TX_DESC_CMD_RS
- | IXGB_TX_DESC_CMD_IDE);
+ | IXGB_TX_DESC_CMD_IDE);
if(++i == adapter->tx_ring.count) i = 0;
adapter->tx_ring.next_to_use = i;
@@ -1273,6 +1254,7 @@
unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
unsigned int f;
+
len -= skb->data_len;
i = tx_ring->next_to_use;
@@ -1526,14 +1508,33 @@
void
ixgb_update_stats(struct ixgb_adapter *adapter)
{
+ struct net_device *netdev = adapter->netdev;
+
+ if((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) ||
+ (netdev->mc_count > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) {
+ u64 multi = IXGB_READ_REG(&adapter->hw, MPRCL);
+ u32 bcast_l = IXGB_READ_REG(&adapter->hw, BPRCL);
+ u32 bcast_h = IXGB_READ_REG(&adapter->hw, BPRCH);
+ u64 bcast = ((u64)bcast_h << 32) | bcast_l;
+
+ multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32);
+ /* fix up multicast stats by removing broadcasts */
+ multi -= bcast;
+
+ adapter->stats.mprcl += (multi & 0xFFFFFFFF);
+ adapter->stats.mprch += (multi >> 32);
+ adapter->stats.bprcl += bcast_l;
+ adapter->stats.bprch += bcast_h;
+ } else {
+ adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL);
+ adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH);
+ adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL);
+ adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH);
+ }
adapter->stats.tprl += IXGB_READ_REG(&adapter->hw, TPRL);
adapter->stats.tprh += IXGB_READ_REG(&adapter->hw, TPRH);
adapter->stats.gprcl += IXGB_READ_REG(&adapter->hw, GPRCL);
adapter->stats.gprch += IXGB_READ_REG(&adapter->hw, GPRCH);
- adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL);
- adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH);
- adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL);
- adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH);
adapter->stats.uprcl += IXGB_READ_REG(&adapter->hw, UPRCL);
adapter->stats.uprch += IXGB_READ_REG(&adapter->hw, UPRCH);
adapter->stats.vprcl += IXGB_READ_REG(&adapter->hw, VPRCL);
@@ -1823,7 +1824,6 @@
struct pci_dev *pdev = adapter->pdev;
struct ixgb_rx_desc *rx_desc, *next_rxd;
struct ixgb_buffer *buffer_info, *next_buffer, *next2_buffer;
- struct sk_buff *skb, *next_skb;
uint32_t length;
unsigned int i, j;
boolean_t cleaned = FALSE;
@@ -1833,6 +1833,8 @@
buffer_info = &rx_ring->buffer_info[i];
while(rx_desc->status & IXGB_RX_DESC_STATUS_DD) {
+ struct sk_buff *skb, *next_skb;
+ u8 status;
#ifdef CONFIG_IXGB_NAPI
if(*work_done >= work_to_do)
@@ -1840,7 +1842,9 @@
(*work_done)++;
#endif
+ status = rx_desc->status;
skb = buffer_info->skb;
+
prefetch(skb->data);
if(++i == rx_ring->count) i = 0;
@@ -1855,7 +1859,6 @@
next_skb = next_buffer->skb;
prefetch(next_skb);
-
cleaned = TRUE;
pci_unmap_single(pdev,
@@ -1865,7 +1868,7 @@
length = le16_to_cpu(rx_desc->length);
- if(unlikely(!(rx_desc->status & IXGB_RX_DESC_STATUS_EOP))) {
+ if(unlikely(!(status & IXGB_RX_DESC_STATUS_EOP))) {
/* All receives must fit into a single buffer */
@@ -1873,12 +1876,7 @@
"length<%x>\n", length);
dev_kfree_skb_irq(skb);
- rx_desc->status = 0;
- buffer_info->skb = NULL;
-
- rx_desc = next_rxd;
- buffer_info = next_buffer;
- continue;
+ goto rxdesc_done;
}
if (unlikely(rx_desc->errors
@@ -1887,12 +1885,7 @@
IXGB_RX_DESC_ERRORS_RXE))) {
dev_kfree_skb_irq(skb);
- rx_desc->status = 0;
- buffer_info->skb = NULL;
-
- rx_desc = next_rxd;
- buffer_info = next_buffer;
- continue;
+ goto rxdesc_done;
}
/* Good Receive */
@@ -1903,7 +1896,7 @@
skb->protocol = eth_type_trans(skb, netdev);
#ifdef CONFIG_IXGB_NAPI
- if(adapter->vlgrp && (rx_desc->status & IXGB_RX_DESC_STATUS_VP)) {
+ if(adapter->vlgrp && (status & IXGB_RX_DESC_STATUS_VP)) {
vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
le16_to_cpu(rx_desc->special) &
IXGB_RX_DESC_SPECIAL_VLAN_MASK);
@@ -1911,7 +1904,7 @@
netif_receive_skb(skb);
}
#else /* CONFIG_IXGB_NAPI */
- if(adapter->vlgrp && (rx_desc->status & IXGB_RX_DESC_STATUS_VP)) {
+ if(adapter->vlgrp && (status & IXGB_RX_DESC_STATUS_VP)) {
vlan_hwaccel_rx(skb, adapter->vlgrp,
le16_to_cpu(rx_desc->special) &
IXGB_RX_DESC_SPECIAL_VLAN_MASK);
@@ -1921,9 +1914,12 @@
#endif /* CONFIG_IXGB_NAPI */
netdev->last_rx = jiffies;
+rxdesc_done:
+ /* clean up descriptor, might be written over by hw */
rx_desc->status = 0;
buffer_info->skb = NULL;
+ /* use prefetched values */
rx_desc = next_rxd;
buffer_info = next_buffer;
}
@@ -1959,8 +1955,8 @@
num_group_tail_writes = IXGB_RX_BUFFER_WRITE;
- /* leave one descriptor unused */
- while(--cleancount > 0) {
+ /* leave three descriptors unused */
+ while(--cleancount > 2) {
rx_desc = IXGB_RX_DESC(*rx_ring, i);
skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN);
@@ -1987,6 +1983,10 @@
PCI_DMA_FROMDEVICE);
rx_desc->buff_addr = cpu_to_le64(buffer_info->dma);
+ /* guarantee DD bit not set now before h/w gets descriptor
+ * this is the rest of the workaround for h/w double
+ * writeback. */
+ rx_desc->status = 0;
if((i & ~(num_group_tail_writes- 1)) == i) {
/* Force memory writes to complete before letting h/w
@@ -2099,54 +2099,6 @@
}
}
-/**
- * ixgb_notify_reboot - handles OS notification of reboot event.
- * @param nb notifier block, unused
- * @param event Event being passed to driver to act upon
- * @param p A pointer to our net device
- **/
-static int
-ixgb_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
-{
- struct pci_dev *pdev = NULL;
-
- switch(event) {
- case SYS_DOWN:
- case SYS_HALT:
- case SYS_POWER_OFF:
- while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
- if (pci_dev_driver(pdev) == &ixgb_driver)
- ixgb_suspend(pdev, 3);
- }
- }
- return NOTIFY_DONE;
-}
-
-/**
- * ixgb_suspend - driver suspend function called from notify.
- * @param pdev pci driver structure used for passing to
- * @param state power state to enter
- **/
-static int
-ixgb_suspend(struct pci_dev *pdev, uint32_t state)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct ixgb_adapter *adapter = netdev->priv;
-
- netif_device_detach(netdev);
-
- if(netif_running(netdev))
- ixgb_down(adapter, TRUE);
-
- pci_save_state(pdev);
-
- state = (state > 0) ? 3 : 0;
- pci_set_power_state(pdev, state);
- msec_delay(200);
-
- return 0;
-}
-
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
* Polling 'interrupt' - used by things like netconsole to send skbs
@@ -2157,6 +2109,7 @@
static void ixgb_netpoll(struct net_device *dev)
{
struct ixgb_adapter *adapter = dev->priv;
+
disable_irq(adapter->pdev->irq);
ixgb_intr(adapter->pdev->irq, dev, NULL);
enable_irq(adapter->pdev->irq);
diff --git a/drivers/net/ixgb/ixgb_osdep.h b/drivers/net/ixgb/ixgb_osdep.h
index 9eba928..dba2048 100644
--- a/drivers/net/ixgb/ixgb_osdep.h
+++ b/drivers/net/ixgb/ixgb_osdep.h
@@ -45,8 +45,7 @@
/* Don't mdelay in interrupt context! */ \
BUG(); \
} else { \
- set_current_state(TASK_UNINTERRUPTIBLE); \
- schedule_timeout((x * HZ)/1000 + 2); \
+ msleep(x); \
} } while(0)
#endif
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 223bdad..babb59e 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -2433,9 +2433,9 @@
rx_mode = RxFilterEnable | AcceptBroadcast
| AcceptMulticast | AcceptMyPhys;
for (i = 0; i < 64; i += 2) {
- writew(HASH_TABLE + i, ioaddr + RxFilterAddr);
- writew((mc_filter[i+1]<<8) + mc_filter[i],
- ioaddr + RxFilterData);
+ writel(HASH_TABLE + i, ioaddr + RxFilterAddr);
+ writel((mc_filter[i + 1] << 8) + mc_filter[i],
+ ioaddr + RxFilterData);
}
}
writel(rx_mode, ioaddr + RxFilterAddr);
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index 2fcc181..c336b46 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1,4 +1,4 @@
-#define _VERSION "0.20"
+#define VERSION "0.22"
/* ns83820.c by Benjamin LaHaise with contributions.
*
* Questions/comments/discussion to linux-ns83820@kvack.org.
@@ -63,9 +63,11 @@
* - fix missed txok introduced during performance
* tuning
* 0.20 - fix stupid RFEN thinko. i am such a smurf.
- *
* 20040828 0.21 - add hardware vlan accleration
* by Neil Horman <nhorman@redhat.com>
+ * 20050406 0.22 - improved DAC ifdefs from Andi Kleen
+ * - removal of dead code from Adrian Bunk
+ * - fix half duplex collision behaviour
* Driver Overview
* ===============
*
@@ -129,18 +131,6 @@
#undef Dprintk
#define Dprintk dprintk
-#if defined(CONFIG_HIGHMEM64G) || defined(__ia64__)
-#define USE_64BIT_ADDR "+"
-#endif
-
-#if defined(USE_64BIT_ADDR)
-#define VERSION _VERSION USE_64BIT_ADDR
-#define TRY_DAC 1
-#else
-#define VERSION _VERSION
-#define TRY_DAC 0
-#endif
-
/* tunables */
#define RX_BUF_SIZE 1500 /* 8192 */
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
@@ -386,22 +376,16 @@
#define LINK_DOWN 0x02
#define LINK_UP 0x04
-#ifdef USE_64BIT_ADDR
-#define HW_ADDR_LEN 8
+#define HW_ADDR_LEN sizeof(dma_addr_t)
#define desc_addr_set(desc, addr) \
do { \
- u64 __addr = (addr); \
- (desc)[0] = cpu_to_le32(__addr); \
- (desc)[1] = cpu_to_le32(__addr >> 32); \
+ ((desc)[0] = cpu_to_le32(addr)); \
+ if (HW_ADDR_LEN == 8) \
+ (desc)[1] = cpu_to_le32(((u64)addr) >> 32); \
} while(0)
#define desc_addr_get(desc) \
- (((u64)le32_to_cpu((desc)[1]) << 32) \
- | le32_to_cpu((desc)[0]))
-#else
-#define HW_ADDR_LEN 4
-#define desc_addr_set(desc, addr) ((desc)[0] = cpu_to_le32(addr))
-#define desc_addr_get(desc) (le32_to_cpu((desc)[0]))
-#endif
+ (le32_to_cpu((desc)[0]) | \
+ (HW_ADDR_LEN == 8 ? ((dma_addr_t)le32_to_cpu((desc)[1]))<<32 : 0))
#define DESC_LINK 0
#define DESC_BUFPTR (DESC_LINK + HW_ADDR_LEN/4)
@@ -727,11 +711,23 @@
speed = ((cfg / CFG_SPDSTS0) & 3);
fullduplex = (cfg & CFG_DUPSTS);
- if (fullduplex)
+ if (fullduplex) {
new_cfg |= CFG_SB;
+ writel(readl(dev->base + TXCFG)
+ | TXCFG_CSI | TXCFG_HBI,
+ dev->base + TXCFG);
+ writel(readl(dev->base + RXCFG) | RXCFG_RX_FD,
+ dev->base + RXCFG);
+ } else {
+ writel(readl(dev->base + TXCFG)
+ & ~(TXCFG_CSI | TXCFG_HBI),
+ dev->base + TXCFG);
+ writel(readl(dev->base + RXCFG) & ~(RXCFG_RX_FD),
+ dev->base + RXCFG);
+ }
if ((cfg & CFG_LNKSTS) &&
- ((new_cfg ^ dev->CFG_cache) & CFG_MODE_1000)) {
+ ((new_cfg ^ dev->CFG_cache) != 0)) {
writel(new_cfg, dev->base + CFG);
dev->CFG_cache = new_cfg;
}
@@ -1189,7 +1185,6 @@
for (;;) {
volatile u32 *desc = dev->tx_descs + (free_idx * DESC_SIZE);
- u32 residue = 0;
dprintk("frag[%3u]: %4u @ 0x%08Lx\n", free_idx, len,
(unsigned long long)buf);
@@ -1199,17 +1194,11 @@
desc_addr_set(desc + DESC_BUFPTR, buf);
desc[DESC_EXTSTS] = cpu_to_le32(extsts);
- cmdsts = ((nr_frags|residue) ? CMDSTS_MORE : do_intr ? CMDSTS_INTR : 0);
+ cmdsts = ((nr_frags) ? CMDSTS_MORE : do_intr ? CMDSTS_INTR : 0);
cmdsts |= (desc == first_desc) ? 0 : CMDSTS_OWN;
cmdsts |= len;
desc[DESC_CMDSTS] = cpu_to_le32(cmdsts);
- if (residue) {
- buf += len;
- len = residue;
- continue;
- }
-
if (!nr_frags)
break;
@@ -1841,7 +1830,8 @@
int using_dac = 0;
/* See if we can set the dma mask early on; failure is fatal. */
- if (TRY_DAC && !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) {
+ if (sizeof(dma_addr_t) == 8 &&
+ !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) {
using_dac = 1;
} else if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
using_dac = 0;
@@ -1972,9 +1962,8 @@
/* When compiled with 64 bit addressing, we must always enable
* the 64 bit descriptor format.
*/
-#ifdef USE_64BIT_ADDR
- dev->CFG_cache |= CFG_M64ADDR;
-#endif
+ if (sizeof(dma_addr_t) == 8)
+ dev->CFG_cache |= CFG_M64ADDR;
if (using_dac)
dev->CFG_cache |= CFG_T64ADDR;
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 17947e6..13f1148 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -22,8 +22,8 @@
*************************************************************************/
#define DRV_NAME "pcnet32"
-#define DRV_VERSION "1.30i"
-#define DRV_RELDATE "06.28.2004"
+#define DRV_VERSION "1.30j"
+#define DRV_RELDATE "29.04.2005"
#define PFX DRV_NAME ": "
static const char *version =
@@ -256,6 +256,7 @@
* homepna for selecting HomePNA mode for PCNet/Home 79C978.
* v1.30h 24 Jun 2004 Don Fry correctly select auto, speed, duplex in bcr32.
* v1.30i 28 Jun 2004 Don Fry change to use module_param.
+ * v1.30j 29 Apr 2005 Don Fry fix skb/map leak with loopback test.
*/
@@ -395,6 +396,7 @@
static int pcnet32_get_regs_len(struct net_device *dev);
static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
void *ptr);
+static void pcnet32_purge_tx_ring(struct net_device *dev);
enum pci_flags_bit {
PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
@@ -785,6 +787,7 @@
}
clean_up:
+ pcnet32_purge_tx_ring(dev);
x = a->read_csr(ioaddr, 15) & 0xFFFF;
a->write_csr(ioaddr, 15, (x & ~0x0044)); /* reset bits 6 and 2 */
diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c
index e68cf5f..20edeb3 100644
--- a/drivers/net/shaper.c
+++ b/drivers/net/shaper.c
@@ -100,35 +100,8 @@
#define SHAPER_BANNER "CymruNet Traffic Shaper BETA 0.04 for Linux 2.1\n"
-/*
- * Locking
- */
-
-static int shaper_lock(struct shaper *sh)
-{
- /*
- * Lock in an interrupt must fail
- */
- while (test_and_set_bit(0, &sh->locked))
- {
- if (!in_interrupt())
- sleep_on(&sh->wait_queue);
- else
- return 0;
-
- }
- return 1;
-}
-
static void shaper_kick(struct shaper *sh);
-static void shaper_unlock(struct shaper *sh)
-{
- clear_bit(0, &sh->locked);
- wake_up(&sh->wait_queue);
- shaper_kick(sh);
-}
-
/*
* Compute clocks on a buffer
*/
@@ -157,17 +130,15 @@
* Throw a frame at a shaper.
*/
-static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb)
+
+static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
+ struct shaper *shaper = dev->priv;
struct sk_buff *ptr;
- /*
- * Get ready to work on this shaper. Lock may fail if its
- * an interrupt and locked.
- */
-
- if(!shaper_lock(shaper))
- return -1;
+ if (down_trylock(&shaper->sem))
+ return -1;
+
ptr=shaper->sendq.prev;
/*
@@ -260,7 +231,8 @@
dev_kfree_skb(ptr);
shaper->stats.collisions++;
}
- shaper_unlock(shaper);
+ shaper_kick(shaper);
+ up(&shaper->sem);
return 0;
}
@@ -297,8 +269,13 @@
static void shaper_timer(unsigned long data)
{
- struct shaper *sh=(struct shaper *)data;
- shaper_kick(sh);
+ struct shaper *shaper = (struct shaper *)data;
+
+ if (!down_trylock(&shaper->sem)) {
+ shaper_kick(shaper);
+ up(&shaper->sem);
+ } else
+ mod_timer(&shaper->timer, jiffies);
}
/*
@@ -311,19 +288,6 @@
struct sk_buff *skb;
/*
- * Shaper unlock will kick
- */
-
- if (test_and_set_bit(0, &shaper->locked))
- {
- if(sh_debug)
- printk("Shaper locked.\n");
- mod_timer(&shaper->timer, jiffies);
- return;
- }
-
-
- /*
* Walk the list (may be empty)
*/
@@ -364,8 +328,6 @@
if(skb!=NULL)
mod_timer(&shaper->timer, SHAPERCB(skb)->shapeclock);
-
- clear_bit(0, &shaper->locked);
}
@@ -376,14 +338,12 @@
static void shaper_flush(struct shaper *shaper)
{
struct sk_buff *skb;
- if(!shaper_lock(shaper))
- {
- printk(KERN_ERR "shaper: shaper_flush() called by an irq!\n");
- return;
- }
+
+ down(&shaper->sem);
while((skb=skb_dequeue(&shaper->sendq))!=NULL)
dev_kfree_skb(skb);
- shaper_unlock(shaper);
+ shaper_kick(shaper);
+ up(&shaper->sem);
}
/*
@@ -426,13 +386,6 @@
* ARP and other resolutions and not before.
*/
-
-static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct shaper *sh=dev->priv;
- return shaper_qframe(sh, skb);
-}
-
static struct net_device_stats *shaper_get_stats(struct net_device *dev)
{
struct shaper *sh=dev->priv;
@@ -623,7 +576,6 @@
init_timer(&sh->timer);
sh->timer.function=shaper_timer;
sh->timer.data=(unsigned long)sh;
- init_waitqueue_head(&sh->wait_queue);
}
/*
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 3e9d9aa..3107aed 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -162,6 +162,7 @@
struct mii_phy * mii;
struct mii_phy * first_mii; /* record the first mii structure */
unsigned int cur_phy;
+ struct mii_if_info mii_info;
struct timer_list timer; /* Link status detection timer. */
u8 autong_complete; /* 1: auto-negotiate complete */
@@ -203,7 +204,7 @@
static int sis900_mii_probe (struct net_device * net_dev);
static void sis900_init_rxfilter (struct net_device * net_dev);
static u16 read_eeprom(long ioaddr, int location);
-static u16 mdio_read(struct net_device *net_dev, int phy_id, int location);
+static int mdio_read(struct net_device *net_dev, int phy_id, int location);
static void mdio_write(struct net_device *net_dev, int phy_id, int location, int val);
static void sis900_timer(unsigned long data);
static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy);
@@ -478,7 +479,13 @@
sis_priv->msg_enable = sis900_debug;
else
sis_priv->msg_enable = SIS900_DEF_MSG;
-
+
+ sis_priv->mii_info.dev = net_dev;
+ sis_priv->mii_info.mdio_read = mdio_read;
+ sis_priv->mii_info.mdio_write = mdio_write;
+ sis_priv->mii_info.phy_id_mask = 0x1f;
+ sis_priv->mii_info.reg_num_mask = 0x1f;
+
/* Get Mac address according to the chip revision */
pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &(sis_priv->chipset_rev));
if(netif_msg_probe(sis_priv))
@@ -725,6 +732,8 @@
pci_name(sis_priv->pci_dev), sis_priv->cur_phy);
}
+ sis_priv->mii_info.phy_id = sis_priv->cur_phy;
+
status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL);
status &= (~MII_CNTL_ISOLATE);
@@ -852,7 +861,7 @@
* Please see SiS7014 or ICS spec
*/
-static u16 mdio_read(struct net_device *net_dev, int phy_id, int location)
+static int mdio_read(struct net_device *net_dev, int phy_id, int location)
{
long mdio_addr = net_dev->base_addr + mear;
int mii_cmd = MIIread|(phy_id<<MIIpmdShift)|(location<<MIIregShift);
@@ -1966,10 +1975,47 @@
sis_priv->msg_enable = value;
}
+static u32 sis900_get_link(struct net_device *net_dev)
+{
+ struct sis900_private *sis_priv = net_dev->priv;
+ return mii_link_ok(&sis_priv->mii_info);
+}
+
+static int sis900_get_settings(struct net_device *net_dev,
+ struct ethtool_cmd *cmd)
+{
+ struct sis900_private *sis_priv = net_dev->priv;
+ spin_lock_irq(&sis_priv->lock);
+ mii_ethtool_gset(&sis_priv->mii_info, cmd);
+ spin_unlock_irq(&sis_priv->lock);
+ return 0;
+}
+
+static int sis900_set_settings(struct net_device *net_dev,
+ struct ethtool_cmd *cmd)
+{
+ struct sis900_private *sis_priv = net_dev->priv;
+ int rt;
+ spin_lock_irq(&sis_priv->lock);
+ rt = mii_ethtool_sset(&sis_priv->mii_info, cmd);
+ spin_unlock_irq(&sis_priv->lock);
+ return rt;
+}
+
+static int sis900_nway_reset(struct net_device *net_dev)
+{
+ struct sis900_private *sis_priv = net_dev->priv;
+ return mii_nway_restart(&sis_priv->mii_info);
+}
+
static struct ethtool_ops sis900_ethtool_ops = {
.get_drvinfo = sis900_get_drvinfo,
.get_msglevel = sis900_get_msglevel,
.set_msglevel = sis900_set_msglevel,
+ .get_link = sis900_get_link,
+ .get_settings = sis900_get_settings,
+ .set_settings = sis900_set_settings,
+ .nway_reset = sis900_nway_reset,
};
/**
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f79b02e..fc9b5cd 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -61,8 +61,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.27"
-#define DRV_MODULE_RELDATE "May 5, 2005"
+#define DRV_MODULE_VERSION "3.29"
+#define DRV_MODULE_RELDATE "May 23, 2005"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -133,6 +133,8 @@
/* number of ETHTOOL_GSTATS u64's */
#define TG3_NUM_STATS (sizeof(struct tg3_ethtool_stats)/sizeof(u64))
+#define TG3_NUM_TEST 6
+
static char version[] __devinitdata =
DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
@@ -206,6 +208,8 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752M,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753M,
@@ -314,6 +318,17 @@
{ "nic_tx_threshold_hit" }
};
+static struct {
+ const char string[ETH_GSTRING_LEN];
+} ethtool_test_keys[TG3_NUM_TEST] = {
+ { "nvram test (online) " },
+ { "link test (online) " },
+ { "register test (offline)" },
+ { "memory test (offline)" },
+ { "loopback test (offline)" },
+ { "interrupt test (offline)" },
+};
+
static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val)
{
if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) {
@@ -420,7 +435,8 @@
{
tw32(TG3PCI_MISC_HOST_CTRL,
(tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT));
- tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000000);
+ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
+ (tp->last_tag << 24));
tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
tg3_cond_int(tp);
@@ -455,10 +471,16 @@
{
tw32(TG3PCI_MISC_HOST_CTRL,
(tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT));
- tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000000);
+ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
+ tp->last_tag << 24);
mmiowb();
- if (tg3_has_work(tp))
+ /* When doing tagged status, this work check is unnecessary.
+ * The last_tag we write above tells the chip which piece of
+ * work we've completed.
+ */
+ if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) &&
+ tg3_has_work(tp))
tw32(HOSTCC_MODE, tp->coalesce_mode |
(HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW));
}
@@ -2500,7 +2522,7 @@
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
if (netif_carrier_ok(tp->dev)) {
tw32(HOSTCC_STAT_COAL_TICKS,
- DEFAULT_STAT_COAL_TICKS);
+ tp->coal.stats_block_coalesce_usecs);
} else {
tw32(HOSTCC_STAT_COAL_TICKS, 0);
}
@@ -2886,7 +2908,6 @@
* All RX "locking" is done by ensuring outside
* code synchronizes with dev->poll()
*/
- done = 1;
if (sblk->idx[0].rx_producer != tp->rx_rcb_ptr) {
int orig_budget = *budget;
int work_done;
@@ -2898,12 +2919,14 @@
*budget -= work_done;
netdev->quota -= work_done;
-
- if (work_done >= orig_budget)
- done = 0;
}
+ if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
+ tp->last_tag = sblk->status_tag;
+ rmb();
+
/* if no more work, tell net stack and NIC we're done */
+ done = !tg3_has_work(tp);
if (done) {
spin_lock_irqsave(&tp->lock, flags);
__netif_rx_complete(netdev);
@@ -2928,22 +2951,21 @@
spin_lock_irqsave(&tp->lock, flags);
/*
- * writing any value to intr-mbox-0 clears PCI INTA# and
+ * Writing any value to intr-mbox-0 clears PCI INTA# and
* chip-internal interrupt pending events.
- * writing non-zero to intr-mbox-0 additional tells the
+ * Writing non-zero to intr-mbox-0 additional tells the
* NIC to stop sending us irqs, engaging "in-intr-handler"
* event coalescing.
*/
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
+ tp->last_tag = sblk->status_tag;
sblk->status &= ~SD_STATUS_UPDATED;
-
if (likely(tg3_has_work(tp)))
netif_rx_schedule(dev); /* schedule NAPI poll */
else {
- /* no work, re-enable interrupts
- */
+ /* No work, re-enable interrupts. */
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
- 0x00000000);
+ tp->last_tag << 24);
}
spin_unlock_irqrestore(&tp->lock, flags);
@@ -2969,6 +2991,52 @@
if ((sblk->status & SD_STATUS_UPDATED) ||
!(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
/*
+ * Writing any value to intr-mbox-0 clears PCI INTA# and
+ * chip-internal interrupt pending events.
+ * Writing non-zero to intr-mbox-0 additional tells the
+ * NIC to stop sending us irqs, engaging "in-intr-handler"
+ * event coalescing.
+ */
+ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
+ 0x00000001);
+ sblk->status &= ~SD_STATUS_UPDATED;
+ if (likely(tg3_has_work(tp)))
+ netif_rx_schedule(dev); /* schedule NAPI poll */
+ else {
+ /* No work, shared interrupt perhaps? re-enable
+ * interrupts, and flush that PCI write
+ */
+ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
+ 0x00000000);
+ tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
+ }
+ } else { /* shared interrupt */
+ handled = 0;
+ }
+
+ spin_unlock_irqrestore(&tp->lock, flags);
+
+ return IRQ_RETVAL(handled);
+}
+
+static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct tg3 *tp = netdev_priv(dev);
+ struct tg3_hw_status *sblk = tp->hw_status;
+ unsigned long flags;
+ unsigned int handled = 1;
+
+ spin_lock_irqsave(&tp->lock, flags);
+
+ /* In INTx mode, it is possible for the interrupt to arrive at
+ * the CPU before the status block posted prior to the interrupt.
+ * Reading the PCI State register will confirm whether the
+ * interrupt is ours and will flush the status block.
+ */
+ if ((sblk->status & SD_STATUS_UPDATED) ||
+ !(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
+ /*
* writing any value to intr-mbox-0 clears PCI INTA# and
* chip-internal interrupt pending events.
* writing non-zero to intr-mbox-0 additional tells the
@@ -2977,13 +3045,8 @@
*/
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
0x00000001);
- /*
- * Flush PCI write. This also guarantees that our
- * status block has been flushed to host memory.
- */
- tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
+ tp->last_tag = sblk->status_tag;
sblk->status &= ~SD_STATUS_UPDATED;
-
if (likely(tg3_has_work(tp)))
netif_rx_schedule(dev); /* schedule NAPI poll */
else {
@@ -2991,7 +3054,7 @@
* interrupts, and flush that PCI write
*/
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
- 0x00000000);
+ tp->last_tag << 24);
tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
}
} else { /* shared interrupt */
@@ -3020,7 +3083,7 @@
}
static int tg3_init_hw(struct tg3 *);
-static int tg3_halt(struct tg3 *, int);
+static int tg3_halt(struct tg3 *, int, int);
#ifdef CONFIG_NET_POLL_CONTROLLER
static void tg3_poll_controller(struct net_device *dev)
@@ -3044,7 +3107,7 @@
restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER;
tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER;
- tg3_halt(tp, 0);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
tg3_init_hw(tp);
tg3_netif_start(tp);
@@ -3390,7 +3453,7 @@
spin_lock_irq(&tp->lock);
spin_lock(&tp->tx_lock);
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_set_mtu(dev, tp, new_mtu);
@@ -4081,19 +4144,19 @@
}
/* tp->lock is held. */
-static int tg3_halt(struct tg3 *tp, int silent)
+static int tg3_halt(struct tg3 *tp, int kind, int silent)
{
int err;
tg3_stop_fw(tp);
- tg3_write_sig_pre_reset(tp, RESET_KIND_SHUTDOWN);
+ tg3_write_sig_pre_reset(tp, kind);
tg3_abort_hw(tp, silent);
err = tg3_chip_reset(tp);
- tg3_write_sig_legacy(tp, RESET_KIND_SHUTDOWN);
- tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN);
+ tg3_write_sig_legacy(tp, kind);
+ tg3_write_sig_post_reset(tp, kind);
if (err)
return err;
@@ -4307,7 +4370,12 @@
*/
tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG;
+ /* It is possible that bootcode is still loading at this point.
+ * Get the nvram lock first before halting the cpu.
+ */
+ tg3_nvram_lock(tp);
err = tg3_halt_cpu(tp, cpu_base);
+ tg3_nvram_unlock(tp);
if (err)
goto out;
@@ -5044,6 +5112,27 @@
}
static void __tg3_set_rx_mode(struct net_device *);
+static void tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
+{
+ tw32(HOSTCC_RXCOL_TICKS, ec->rx_coalesce_usecs);
+ tw32(HOSTCC_TXCOL_TICKS, ec->tx_coalesce_usecs);
+ tw32(HOSTCC_RXMAX_FRAMES, ec->rx_max_coalesced_frames);
+ tw32(HOSTCC_TXMAX_FRAMES, ec->tx_max_coalesced_frames);
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+ tw32(HOSTCC_RXCOAL_TICK_INT, ec->rx_coalesce_usecs_irq);
+ tw32(HOSTCC_TXCOAL_TICK_INT, ec->tx_coalesce_usecs_irq);
+ }
+ tw32(HOSTCC_RXCOAL_MAXF_INT, ec->rx_max_coalesced_frames_irq);
+ tw32(HOSTCC_TXCOAL_MAXF_INT, ec->tx_max_coalesced_frames_irq);
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+ u32 val = ec->stats_block_coalesce_usecs;
+
+ if (!netif_carrier_ok(tp->dev))
+ val = 0;
+
+ tw32(HOSTCC_STAT_COAL_TICKS, val);
+ }
+}
/* tp->lock is held. */
static int tg3_reset_hw(struct tg3 *tp)
@@ -5366,16 +5455,7 @@
udelay(10);
}
- tw32(HOSTCC_RXCOL_TICKS, 0);
- tw32(HOSTCC_TXCOL_TICKS, LOW_TXCOL_TICKS);
- tw32(HOSTCC_RXMAX_FRAMES, 1);
- tw32(HOSTCC_TXMAX_FRAMES, LOW_RXMAX_FRAMES);
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
- tw32(HOSTCC_RXCOAL_TICK_INT, 0);
- tw32(HOSTCC_TXCOAL_TICK_INT, 0);
- }
- tw32(HOSTCC_RXCOAL_MAXF_INT, 1);
- tw32(HOSTCC_TXCOAL_MAXF_INT, 0);
+ tg3_set_coalesce(tp, &tp->coal);
/* set status block DMA address */
tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH,
@@ -5388,8 +5468,6 @@
* the tg3_periodic_fetch_stats call there, and
* tg3_get_stats to see how this works for 5705/5750 chips.
*/
- tw32(HOSTCC_STAT_COAL_TICKS,
- DEFAULT_STAT_COAL_TICKS);
tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH,
((u64) tp->stats_mapping >> 32));
tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
@@ -5445,7 +5523,8 @@
udelay(100);
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0);
- tr32(MAILBOX_INTERRUPT_0);
+ tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
+ tp->last_tag = 0;
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
tw32_f(DMAC_MODE, DMAC_MODE_ENABLE);
@@ -5723,31 +5802,33 @@
spin_lock_irqsave(&tp->lock, flags);
spin_lock(&tp->tx_lock);
- /* All of this garbage is because when using non-tagged
- * IRQ status the mailbox/status_block protocol the chip
- * uses with the cpu is race prone.
- */
- if (tp->hw_status->status & SD_STATUS_UPDATED) {
- tw32(GRC_LOCAL_CTRL,
- tp->grc_local_ctrl | GRC_LCLCTRL_SETINT);
- } else {
- tw32(HOSTCC_MODE, tp->coalesce_mode |
- (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW));
- }
+ if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
+ /* All of this garbage is because when using non-tagged
+ * IRQ status the mailbox/status_block protocol the chip
+ * uses with the cpu is race prone.
+ */
+ if (tp->hw_status->status & SD_STATUS_UPDATED) {
+ tw32(GRC_LOCAL_CTRL,
+ tp->grc_local_ctrl | GRC_LCLCTRL_SETINT);
+ } else {
+ tw32(HOSTCC_MODE, tp->coalesce_mode |
+ (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW));
+ }
- if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
- tp->tg3_flags2 |= TG3_FLG2_RESTART_TIMER;
- spin_unlock(&tp->tx_lock);
- spin_unlock_irqrestore(&tp->lock, flags);
- schedule_work(&tp->reset_task);
- return;
+ if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
+ tp->tg3_flags2 |= TG3_FLG2_RESTART_TIMER;
+ spin_unlock(&tp->tx_lock);
+ spin_unlock_irqrestore(&tp->lock, flags);
+ schedule_work(&tp->reset_task);
+ return;
+ }
}
- if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
- tg3_periodic_fetch_stats(tp);
-
/* This part only runs once per second. */
if (!--tp->timer_counter) {
+ if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+ tg3_periodic_fetch_stats(tp);
+
if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) {
u32 mac_stat;
int phy_event;
@@ -5818,6 +5899,9 @@
int err, i;
u32 int_mbox = 0;
+ if (!netif_running(dev))
+ return -ENODEV;
+
tg3_disable_ints(tp);
free_irq(tp->pdev->irq, dev);
@@ -5846,9 +5930,13 @@
if (tp->tg3_flags2 & TG3_FLG2_USING_MSI)
err = request_irq(tp->pdev->irq, tg3_msi,
SA_SAMPLE_RANDOM, dev->name, dev);
- else
- err = request_irq(tp->pdev->irq, tg3_interrupt,
+ else {
+ irqreturn_t (*fn)(int, void *, struct pt_regs *)=tg3_interrupt;
+ if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
+ fn = tg3_interrupt_tagged;
+ err = request_irq(tp->pdev->irq, fn,
SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev);
+ }
if (err)
return err;
@@ -5900,9 +5988,14 @@
tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
- err = request_irq(tp->pdev->irq, tg3_interrupt,
- SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev);
+ {
+ irqreturn_t (*fn)(int, void *, struct pt_regs *)=tg3_interrupt;
+ if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
+ fn = tg3_interrupt_tagged;
+ err = request_irq(tp->pdev->irq, fn,
+ SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev);
+ }
if (err)
return err;
@@ -5912,7 +6005,7 @@
spin_lock_irq(&tp->lock);
spin_lock(&tp->tx_lock);
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
err = tg3_init_hw(tp);
spin_unlock(&tp->tx_lock);
@@ -5948,7 +6041,13 @@
if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
(GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5750_AX) &&
(GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5750_BX)) {
- if (pci_enable_msi(tp->pdev) == 0) {
+ /* All MSI supporting chips should support tagged
+ * status. Assert that this is the case.
+ */
+ if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
+ printk(KERN_WARNING PFX "%s: MSI without TAGGED? "
+ "Not using MSI.\n", tp->dev->name);
+ } else if (pci_enable_msi(tp->pdev) == 0) {
u32 msi_mode;
msi_mode = tr32(MSGINT_MODE);
@@ -5959,9 +6058,14 @@
if (tp->tg3_flags2 & TG3_FLG2_USING_MSI)
err = request_irq(tp->pdev->irq, tg3_msi,
SA_SAMPLE_RANDOM, dev->name, dev);
- else
- err = request_irq(tp->pdev->irq, tg3_interrupt,
+ else {
+ irqreturn_t (*fn)(int, void *, struct pt_regs *)=tg3_interrupt;
+ if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
+ fn = tg3_interrupt_tagged;
+
+ err = request_irq(tp->pdev->irq, fn,
SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev);
+ }
if (err) {
if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
@@ -5977,12 +6081,19 @@
err = tg3_init_hw(tp);
if (err) {
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_free_rings(tp);
} else {
- tp->timer_offset = HZ / 10;
- tp->timer_counter = tp->timer_multiplier = 10;
- tp->asf_counter = tp->asf_multiplier = (10 * 120);
+ if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
+ tp->timer_offset = HZ;
+ else
+ tp->timer_offset = HZ / 10;
+
+ BUG_ON(tp->timer_offset > HZ);
+ tp->timer_counter = tp->timer_multiplier =
+ (HZ / tp->timer_offset);
+ tp->asf_counter = tp->asf_multiplier =
+ ((HZ / tp->timer_offset) * 120);
init_timer(&tp->timer);
tp->timer.expires = jiffies + tp->timer_offset;
@@ -6005,6 +6116,7 @@
if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
err = tg3_test_msi(tp);
+
if (err) {
spin_lock_irq(&tp->lock);
spin_lock(&tp->tx_lock);
@@ -6013,7 +6125,7 @@
pci_disable_msi(tp->pdev);
tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
}
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_free_rings(tp);
tg3_free_consistent(tp);
@@ -6286,7 +6398,7 @@
tg3_disable_ints(tp);
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_free_rings(tp);
tp->tg3_flags &=
~(TG3_FLAG_INIT_COMPLETE |
@@ -7006,7 +7118,7 @@
tp->tx_pending = ering->tx_pending;
if (netif_running(dev)) {
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_init_hw(tp);
tg3_netif_start(tp);
}
@@ -7049,7 +7161,7 @@
tp->tg3_flags &= ~TG3_FLAG_TX_PAUSE;
if (netif_running(dev)) {
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_init_hw(tp);
tg3_netif_start(tp);
}
@@ -7108,12 +7220,20 @@
return TG3_NUM_STATS;
}
+static int tg3_get_test_count (struct net_device *dev)
+{
+ return TG3_NUM_TEST;
+}
+
static void tg3_get_strings (struct net_device *dev, u32 stringset, u8 *buf)
{
switch (stringset) {
case ETH_SS_STATS:
memcpy(buf, ðtool_stats_keys, sizeof(ethtool_stats_keys));
break;
+ case ETH_SS_TEST:
+ memcpy(buf, ðtool_test_keys, sizeof(ethtool_test_keys));
+ break;
default:
WARN_ON(1); /* we need a WARN() */
break;
@@ -7127,6 +7247,516 @@
memcpy(tmp_stats, tg3_get_estats(tp), sizeof(tp->estats));
}
+#define NVRAM_TEST_SIZE 0x100
+
+static int tg3_test_nvram(struct tg3 *tp)
+{
+ u32 *buf, csum;
+ int i, j, err = 0;
+
+ buf = kmalloc(NVRAM_TEST_SIZE, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ for (i = 0, j = 0; i < NVRAM_TEST_SIZE; i += 4, j++) {
+ u32 val;
+
+ if ((err = tg3_nvram_read(tp, i, &val)) != 0)
+ break;
+ buf[j] = cpu_to_le32(val);
+ }
+ if (i < NVRAM_TEST_SIZE)
+ goto out;
+
+ err = -EIO;
+ if (cpu_to_be32(buf[0]) != TG3_EEPROM_MAGIC)
+ goto out;
+
+ /* Bootstrap checksum at offset 0x10 */
+ csum = calc_crc((unsigned char *) buf, 0x10);
+ if(csum != cpu_to_le32(buf[0x10/4]))
+ goto out;
+
+ /* Manufacturing block starts at offset 0x74, checksum at 0xfc */
+ csum = calc_crc((unsigned char *) &buf[0x74/4], 0x88);
+ if (csum != cpu_to_le32(buf[0xfc/4]))
+ goto out;
+
+ err = 0;
+
+out:
+ kfree(buf);
+ return err;
+}
+
+#define TG3_SERDES_TIMEOUT_SEC 2
+#define TG3_COPPER_TIMEOUT_SEC 6
+
+static int tg3_test_link(struct tg3 *tp)
+{
+ int i, max;
+
+ if (!netif_running(tp->dev))
+ return -ENODEV;
+
+ if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
+ max = TG3_SERDES_TIMEOUT_SEC;
+ else
+ max = TG3_COPPER_TIMEOUT_SEC;
+
+ for (i = 0; i < max; i++) {
+ if (netif_carrier_ok(tp->dev))
+ return 0;
+
+ if (msleep_interruptible(1000))
+ break;
+ }
+
+ return -EIO;
+}
+
+/* Only test the commonly used registers */
+static int tg3_test_registers(struct tg3 *tp)
+{
+ int i, is_5705;
+ u32 offset, read_mask, write_mask, val, save_val, read_val;
+ static struct {
+ u16 offset;
+ u16 flags;
+#define TG3_FL_5705 0x1
+#define TG3_FL_NOT_5705 0x2
+#define TG3_FL_NOT_5788 0x4
+ u32 read_mask;
+ u32 write_mask;
+ } reg_tbl[] = {
+ /* MAC Control Registers */
+ { MAC_MODE, TG3_FL_NOT_5705,
+ 0x00000000, 0x00ef6f8c },
+ { MAC_MODE, TG3_FL_5705,
+ 0x00000000, 0x01ef6b8c },
+ { MAC_STATUS, TG3_FL_NOT_5705,
+ 0x03800107, 0x00000000 },
+ { MAC_STATUS, TG3_FL_5705,
+ 0x03800100, 0x00000000 },
+ { MAC_ADDR_0_HIGH, 0x0000,
+ 0x00000000, 0x0000ffff },
+ { MAC_ADDR_0_LOW, 0x0000,
+ 0x00000000, 0xffffffff },
+ { MAC_RX_MTU_SIZE, 0x0000,
+ 0x00000000, 0x0000ffff },
+ { MAC_TX_MODE, 0x0000,
+ 0x00000000, 0x00000070 },
+ { MAC_TX_LENGTHS, 0x0000,
+ 0x00000000, 0x00003fff },
+ { MAC_RX_MODE, TG3_FL_NOT_5705,
+ 0x00000000, 0x000007fc },
+ { MAC_RX_MODE, TG3_FL_5705,
+ 0x00000000, 0x000007dc },
+ { MAC_HASH_REG_0, 0x0000,
+ 0x00000000, 0xffffffff },
+ { MAC_HASH_REG_1, 0x0000,
+ 0x00000000, 0xffffffff },
+ { MAC_HASH_REG_2, 0x0000,
+ 0x00000000, 0xffffffff },
+ { MAC_HASH_REG_3, 0x0000,
+ 0x00000000, 0xffffffff },
+
+ /* Receive Data and Receive BD Initiator Control Registers. */
+ { RCVDBDI_JUMBO_BD+0, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_JUMBO_BD+4, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_JUMBO_BD+8, TG3_FL_NOT_5705,
+ 0x00000000, 0x00000003 },
+ { RCVDBDI_JUMBO_BD+0xc, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_STD_BD+0, 0x0000,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_STD_BD+4, 0x0000,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_STD_BD+8, 0x0000,
+ 0x00000000, 0xffff0002 },
+ { RCVDBDI_STD_BD+0xc, 0x0000,
+ 0x00000000, 0xffffffff },
+
+ /* Receive BD Initiator Control Registers. */
+ { RCVBDI_STD_THRESH, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { RCVBDI_STD_THRESH, TG3_FL_5705,
+ 0x00000000, 0x000003ff },
+ { RCVBDI_JUMBO_THRESH, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+
+ /* Host Coalescing Control Registers. */
+ { HOSTCC_MODE, TG3_FL_NOT_5705,
+ 0x00000000, 0x00000004 },
+ { HOSTCC_MODE, TG3_FL_5705,
+ 0x00000000, 0x000000f6 },
+ { HOSTCC_RXCOL_TICKS, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_RXCOL_TICKS, TG3_FL_5705,
+ 0x00000000, 0x000003ff },
+ { HOSTCC_TXCOL_TICKS, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_TXCOL_TICKS, TG3_FL_5705,
+ 0x00000000, 0x000003ff },
+ { HOSTCC_RXMAX_FRAMES, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_RXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788,
+ 0x00000000, 0x000000ff },
+ { HOSTCC_TXMAX_FRAMES, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_TXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788,
+ 0x00000000, 0x000000ff },
+ { HOSTCC_RXCOAL_TICK_INT, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_TXCOAL_TICK_INT, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788,
+ 0x00000000, 0x000000ff },
+ { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788,
+ 0x00000000, 0x000000ff },
+ { HOSTCC_STAT_COAL_TICKS, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATS_BLK_HOST_ADDR, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATS_BLK_HOST_ADDR+4, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATUS_BLK_HOST_ADDR, 0x0000,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATUS_BLK_HOST_ADDR+4, 0x0000,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATS_BLK_NIC_ADDR, 0x0000,
+ 0xffffffff, 0x00000000 },
+ { HOSTCC_STATUS_BLK_NIC_ADDR, 0x0000,
+ 0xffffffff, 0x00000000 },
+
+ /* Buffer Manager Control Registers. */
+ { BUFMGR_MB_POOL_ADDR, 0x0000,
+ 0x00000000, 0x007fff80 },
+ { BUFMGR_MB_POOL_SIZE, 0x0000,
+ 0x00000000, 0x007fffff },
+ { BUFMGR_MB_RDMA_LOW_WATER, 0x0000,
+ 0x00000000, 0x0000003f },
+ { BUFMGR_MB_MACRX_LOW_WATER, 0x0000,
+ 0x00000000, 0x000001ff },
+ { BUFMGR_MB_HIGH_WATER, 0x0000,
+ 0x00000000, 0x000001ff },
+ { BUFMGR_DMA_DESC_POOL_ADDR, TG3_FL_NOT_5705,
+ 0xffffffff, 0x00000000 },
+ { BUFMGR_DMA_DESC_POOL_SIZE, TG3_FL_NOT_5705,
+ 0xffffffff, 0x00000000 },
+
+ /* Mailbox Registers */
+ { GRCMBOX_RCVSTD_PROD_IDX+4, 0x0000,
+ 0x00000000, 0x000001ff },
+ { GRCMBOX_RCVJUMBO_PROD_IDX+4, TG3_FL_NOT_5705,
+ 0x00000000, 0x000001ff },
+ { GRCMBOX_RCVRET_CON_IDX_0+4, 0x0000,
+ 0x00000000, 0x000007ff },
+ { GRCMBOX_SNDHOST_PROD_IDX_0+4, 0x0000,
+ 0x00000000, 0x000001ff },
+
+ { 0xffff, 0x0000, 0x00000000, 0x00000000 },
+ };
+
+ if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+ is_5705 = 1;
+ else
+ is_5705 = 0;
+
+ for (i = 0; reg_tbl[i].offset != 0xffff; i++) {
+ if (is_5705 && (reg_tbl[i].flags & TG3_FL_NOT_5705))
+ continue;
+
+ if (!is_5705 && (reg_tbl[i].flags & TG3_FL_5705))
+ continue;
+
+ if ((tp->tg3_flags2 & TG3_FLG2_IS_5788) &&
+ (reg_tbl[i].flags & TG3_FL_NOT_5788))
+ continue;
+
+ offset = (u32) reg_tbl[i].offset;
+ read_mask = reg_tbl[i].read_mask;
+ write_mask = reg_tbl[i].write_mask;
+
+ /* Save the original register content */
+ save_val = tr32(offset);
+
+ /* Determine the read-only value. */
+ read_val = save_val & read_mask;
+
+ /* Write zero to the register, then make sure the read-only bits
+ * are not changed and the read/write bits are all zeros.
+ */
+ tw32(offset, 0);
+
+ val = tr32(offset);
+
+ /* Test the read-only and read/write bits. */
+ if (((val & read_mask) != read_val) || (val & write_mask))
+ goto out;
+
+ /* Write ones to all the bits defined by RdMask and WrMask, then
+ * make sure the read-only bits are not changed and the
+ * read/write bits are all ones.
+ */
+ tw32(offset, read_mask | write_mask);
+
+ val = tr32(offset);
+
+ /* Test the read-only bits. */
+ if ((val & read_mask) != read_val)
+ goto out;
+
+ /* Test the read/write bits. */
+ if ((val & write_mask) != write_mask)
+ goto out;
+
+ tw32(offset, save_val);
+ }
+
+ return 0;
+
+out:
+ printk(KERN_ERR PFX "Register test failed at offset %x\n", offset);
+ tw32(offset, save_val);
+ return -EIO;
+}
+
+static int tg3_do_mem_test(struct tg3 *tp, u32 offset, u32 len)
+{
+ static u32 test_pattern[] = { 0x00000000, 0xffffffff, 0xaa55a55a };
+ int i;
+ u32 j;
+
+ for (i = 0; i < sizeof(test_pattern)/sizeof(u32); i++) {
+ for (j = 0; j < len; j += 4) {
+ u32 val;
+
+ tg3_write_mem(tp, offset + j, test_pattern[i]);
+ tg3_read_mem(tp, offset + j, &val);
+ if (val != test_pattern[i])
+ return -EIO;
+ }
+ }
+ return 0;
+}
+
+static int tg3_test_memory(struct tg3 *tp)
+{
+ static struct mem_entry {
+ u32 offset;
+ u32 len;
+ } mem_tbl_570x[] = {
+ { 0x00000000, 0x01000},
+ { 0x00002000, 0x1c000},
+ { 0xffffffff, 0x00000}
+ }, mem_tbl_5705[] = {
+ { 0x00000100, 0x0000c},
+ { 0x00000200, 0x00008},
+ { 0x00000b50, 0x00400},
+ { 0x00004000, 0x00800},
+ { 0x00006000, 0x01000},
+ { 0x00008000, 0x02000},
+ { 0x00010000, 0x0e000},
+ { 0xffffffff, 0x00000}
+ };
+ struct mem_entry *mem_tbl;
+ int err = 0;
+ int i;
+
+ if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+ mem_tbl = mem_tbl_5705;
+ else
+ mem_tbl = mem_tbl_570x;
+
+ for (i = 0; mem_tbl[i].offset != 0xffffffff; i++) {
+ if ((err = tg3_do_mem_test(tp, mem_tbl[i].offset,
+ mem_tbl[i].len)) != 0)
+ break;
+ }
+
+ return err;
+}
+
+static int tg3_test_loopback(struct tg3 *tp)
+{
+ u32 mac_mode, send_idx, rx_start_idx, rx_idx, tx_idx, opaque_key;
+ u32 desc_idx;
+ struct sk_buff *skb, *rx_skb;
+ u8 *tx_data;
+ dma_addr_t map;
+ int num_pkts, tx_len, rx_len, i, err;
+ struct tg3_rx_buffer_desc *desc;
+
+ if (!netif_running(tp->dev))
+ return -ENODEV;
+
+ err = -EIO;
+
+ tg3_abort_hw(tp, 1);
+
+ /* Clearing this flag to keep interrupts disabled */
+ tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
+ tg3_reset_hw(tp);
+
+ mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
+ MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY |
+ MAC_MODE_PORT_MODE_GMII;
+ tw32(MAC_MODE, mac_mode);
+
+ tx_len = 1514;
+ skb = dev_alloc_skb(tx_len);
+ tx_data = skb_put(skb, tx_len);
+ memcpy(tx_data, tp->dev->dev_addr, 6);
+ memset(tx_data + 6, 0x0, 8);
+
+ tw32(MAC_RX_MTU_SIZE, tx_len + 4);
+
+ for (i = 14; i < tx_len; i++)
+ tx_data[i] = (u8) (i & 0xff);
+
+ map = pci_map_single(tp->pdev, skb->data, tx_len, PCI_DMA_TODEVICE);
+
+ tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
+ HOSTCC_MODE_NOW);
+
+ udelay(10);
+
+ rx_start_idx = tp->hw_status->idx[0].rx_producer;
+
+ send_idx = 0;
+ num_pkts = 0;
+
+ tg3_set_txd(tp, send_idx, map, tx_len, 0, 1);
+
+ send_idx++;
+ num_pkts++;
+
+ tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, send_idx);
+ tr32(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW);
+
+ udelay(10);
+
+ for (i = 0; i < 10; i++) {
+ tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
+ HOSTCC_MODE_NOW);
+
+ udelay(10);
+
+ tx_idx = tp->hw_status->idx[0].tx_consumer;
+ rx_idx = tp->hw_status->idx[0].rx_producer;
+ if ((tx_idx == send_idx) &&
+ (rx_idx == (rx_start_idx + num_pkts)))
+ break;
+ }
+
+ pci_unmap_single(tp->pdev, map, tx_len, PCI_DMA_TODEVICE);
+ dev_kfree_skb(skb);
+
+ if (tx_idx != send_idx)
+ goto out;
+
+ if (rx_idx != rx_start_idx + num_pkts)
+ goto out;
+
+ desc = &tp->rx_rcb[rx_start_idx];
+ desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK;
+ opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK;
+ if (opaque_key != RXD_OPAQUE_RING_STD)
+ goto out;
+
+ if ((desc->err_vlan & RXD_ERR_MASK) != 0 &&
+ (desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII))
+ goto out;
+
+ rx_len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) - 4;
+ if (rx_len != tx_len)
+ goto out;
+
+ rx_skb = tp->rx_std_buffers[desc_idx].skb;
+
+ map = pci_unmap_addr(&tp->rx_std_buffers[desc_idx], mapping);
+ pci_dma_sync_single_for_cpu(tp->pdev, map, rx_len, PCI_DMA_FROMDEVICE);
+
+ for (i = 14; i < tx_len; i++) {
+ if (*(rx_skb->data + i) != (u8) (i & 0xff))
+ goto out;
+ }
+ err = 0;
+
+ /* tg3_free_rings will unmap and free the rx_skb */
+out:
+ return err;
+}
+
+static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
+ u64 *data)
+{
+ struct tg3 *tp = netdev_priv(dev);
+
+ memset(data, 0, sizeof(u64) * TG3_NUM_TEST);
+
+ if (tg3_test_nvram(tp) != 0) {
+ etest->flags |= ETH_TEST_FL_FAILED;
+ data[0] = 1;
+ }
+ if (tg3_test_link(tp) != 0) {
+ etest->flags |= ETH_TEST_FL_FAILED;
+ data[1] = 1;
+ }
+ if (etest->flags & ETH_TEST_FL_OFFLINE) {
+ if (netif_running(dev))
+ tg3_netif_stop(tp);
+
+ spin_lock_irq(&tp->lock);
+ spin_lock(&tp->tx_lock);
+
+ tg3_halt(tp, RESET_KIND_SUSPEND, 1);
+ tg3_nvram_lock(tp);
+ tg3_halt_cpu(tp, RX_CPU_BASE);
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ tg3_halt_cpu(tp, TX_CPU_BASE);
+ tg3_nvram_unlock(tp);
+
+ if (tg3_test_registers(tp) != 0) {
+ etest->flags |= ETH_TEST_FL_FAILED;
+ data[2] = 1;
+ }
+ if (tg3_test_memory(tp) != 0) {
+ etest->flags |= ETH_TEST_FL_FAILED;
+ data[3] = 1;
+ }
+ if (tg3_test_loopback(tp) != 0) {
+ etest->flags |= ETH_TEST_FL_FAILED;
+ data[4] = 1;
+ }
+
+ spin_unlock(&tp->tx_lock);
+ spin_unlock_irq(&tp->lock);
+ if (tg3_test_interrupt(tp) != 0) {
+ etest->flags |= ETH_TEST_FL_FAILED;
+ data[5] = 1;
+ }
+ spin_lock_irq(&tp->lock);
+ spin_lock(&tp->tx_lock);
+
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
+ if (netif_running(dev)) {
+ tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
+ tg3_init_hw(tp);
+ tg3_netif_start(tp);
+ }
+ spin_unlock(&tp->tx_lock);
+ spin_unlock_irq(&tp->lock);
+ }
+}
+
static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mii_ioctl_data *data = if_mii(ifr);
@@ -7203,6 +7833,14 @@
}
#endif
+static int tg3_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)
+{
+ struct tg3 *tp = netdev_priv(dev);
+
+ memcpy(ec, &tp->coal, sizeof(*ec));
+ return 0;
+}
+
static struct ethtool_ops tg3_ethtool_ops = {
.get_settings = tg3_get_settings,
.set_settings = tg3_set_settings,
@@ -7232,9 +7870,12 @@
.get_tso = ethtool_op_get_tso,
.set_tso = tg3_set_tso,
#endif
+ .self_test_count = tg3_get_test_count,
+ .self_test = tg3_self_test,
.get_strings = tg3_get_strings,
.get_stats_count = tg3_get_stats_count,
.get_ethtool_stats = tg3_get_ethtool_stats,
+ .get_coalesce = tg3_get_coalesce,
};
static void __devinit tg3_get_eeprom_size(struct tg3 *tp)
@@ -8422,15 +9063,7 @@
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
- /* Only 5701 and later support tagged irq status mode.
- * Also, 5788 chips cannot use tagged irq status.
- *
- * However, since we are using NAPI avoid tagged irq status
- * because the interrupt condition is more difficult to
- * fully clear in that mode.
- */
tp->coalesce_mode = 0;
-
if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_AX &&
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_BX)
tp->coalesce_mode |= HOSTCC_MODE_32BYTE;
@@ -8494,6 +9127,18 @@
grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788M))
tp->tg3_flags2 |= TG3_FLG2_IS_5788;
+ if (!(tp->tg3_flags2 & TG3_FLG2_IS_5788) &&
+ (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700))
+ tp->tg3_flags |= TG3_FLAG_TAGGED_STATUS;
+ if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) {
+ tp->coalesce_mode |= (HOSTCC_MODE_CLRTICK_RXBD |
+ HOSTCC_MODE_CLRTICK_TXBD);
+
+ tp->misc_host_ctrl |= MISC_HOST_CTRL_TAGGED_STATUS;
+ pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
+ tp->misc_host_ctrl);
+ }
+
/* these are limited to 10/100 only */
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 &&
(grc_misc_cfg == 0x8000 || grc_misc_cfg == 0x4000)) ||
@@ -8671,6 +9316,146 @@
return 0;
}
+#define BOUNDARY_SINGLE_CACHELINE 1
+#define BOUNDARY_MULTI_CACHELINE 2
+
+static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val)
+{
+ int cacheline_size;
+ u8 byte;
+ int goal;
+
+ pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE, &byte);
+ if (byte == 0)
+ cacheline_size = 1024;
+ else
+ cacheline_size = (int) byte * 4;
+
+ /* On 5703 and later chips, the boundary bits have no
+ * effect.
+ */
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 &&
+ !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
+ goto out;
+
+#if defined(CONFIG_PPC64) || defined(CONFIG_IA64) || defined(CONFIG_PARISC)
+ goal = BOUNDARY_MULTI_CACHELINE;
+#else
+#if defined(CONFIG_SPARC64) || defined(CONFIG_ALPHA)
+ goal = BOUNDARY_SINGLE_CACHELINE;
+#else
+ goal = 0;
+#endif
+#endif
+
+ if (!goal)
+ goto out;
+
+ /* PCI controllers on most RISC systems tend to disconnect
+ * when a device tries to burst across a cache-line boundary.
+ * Therefore, letting tg3 do so just wastes PCI bandwidth.
+ *
+ * Unfortunately, for PCI-E there are only limited
+ * write-side controls for this, and thus for reads
+ * we will still get the disconnects. We'll also waste
+ * these PCI cycles for both read and write for chips
+ * other than 5700 and 5701 which do not implement the
+ * boundary bits.
+ */
+ if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
+ !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) {
+ switch (cacheline_size) {
+ case 16:
+ case 32:
+ case 64:
+ case 128:
+ if (goal == BOUNDARY_SINGLE_CACHELINE) {
+ val |= (DMA_RWCTRL_READ_BNDRY_128_PCIX |
+ DMA_RWCTRL_WRITE_BNDRY_128_PCIX);
+ } else {
+ val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX |
+ DMA_RWCTRL_WRITE_BNDRY_384_PCIX);
+ }
+ break;
+
+ case 256:
+ val |= (DMA_RWCTRL_READ_BNDRY_256_PCIX |
+ DMA_RWCTRL_WRITE_BNDRY_256_PCIX);
+ break;
+
+ default:
+ val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX |
+ DMA_RWCTRL_WRITE_BNDRY_384_PCIX);
+ break;
+ };
+ } else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
+ switch (cacheline_size) {
+ case 16:
+ case 32:
+ case 64:
+ if (goal == BOUNDARY_SINGLE_CACHELINE) {
+ val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE;
+ val |= DMA_RWCTRL_WRITE_BNDRY_64_PCIE;
+ break;
+ }
+ /* fallthrough */
+ case 128:
+ default:
+ val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE;
+ val |= DMA_RWCTRL_WRITE_BNDRY_128_PCIE;
+ break;
+ };
+ } else {
+ switch (cacheline_size) {
+ case 16:
+ if (goal == BOUNDARY_SINGLE_CACHELINE) {
+ val |= (DMA_RWCTRL_READ_BNDRY_16 |
+ DMA_RWCTRL_WRITE_BNDRY_16);
+ break;
+ }
+ /* fallthrough */
+ case 32:
+ if (goal == BOUNDARY_SINGLE_CACHELINE) {
+ val |= (DMA_RWCTRL_READ_BNDRY_32 |
+ DMA_RWCTRL_WRITE_BNDRY_32);
+ break;
+ }
+ /* fallthrough */
+ case 64:
+ if (goal == BOUNDARY_SINGLE_CACHELINE) {
+ val |= (DMA_RWCTRL_READ_BNDRY_64 |
+ DMA_RWCTRL_WRITE_BNDRY_64);
+ break;
+ }
+ /* fallthrough */
+ case 128:
+ if (goal == BOUNDARY_SINGLE_CACHELINE) {
+ val |= (DMA_RWCTRL_READ_BNDRY_128 |
+ DMA_RWCTRL_WRITE_BNDRY_128);
+ break;
+ }
+ /* fallthrough */
+ case 256:
+ val |= (DMA_RWCTRL_READ_BNDRY_256 |
+ DMA_RWCTRL_WRITE_BNDRY_256);
+ break;
+ case 512:
+ val |= (DMA_RWCTRL_READ_BNDRY_512 |
+ DMA_RWCTRL_WRITE_BNDRY_512);
+ break;
+ case 1024:
+ default:
+ val |= (DMA_RWCTRL_READ_BNDRY_1024 |
+ DMA_RWCTRL_WRITE_BNDRY_1024);
+ break;
+ };
+ }
+
+out:
+ return val;
+}
+
static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dma, int size, int to_device)
{
struct tg3_internal_buffer_desc test_desc;
@@ -8752,12 +9537,12 @@
return ret;
}
-#define TEST_BUFFER_SIZE 0x400
+#define TEST_BUFFER_SIZE 0x2000
static int __devinit tg3_test_dma(struct tg3 *tp)
{
dma_addr_t buf_dma;
- u32 *buf;
+ u32 *buf, saved_dma_rwctrl;
int ret;
buf = pci_alloc_consistent(tp->pdev, TEST_BUFFER_SIZE, &buf_dma);
@@ -8769,46 +9554,7 @@
tp->dma_rwctrl = ((0x7 << DMA_RWCTRL_PCI_WRITE_CMD_SHIFT) |
(0x6 << DMA_RWCTRL_PCI_READ_CMD_SHIFT));
-#ifndef CONFIG_X86
- {
- u8 byte;
- int cacheline_size;
- pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE, &byte);
-
- if (byte == 0)
- cacheline_size = 1024;
- else
- cacheline_size = (int) byte * 4;
-
- switch (cacheline_size) {
- case 16:
- case 32:
- case 64:
- case 128:
- if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
- !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) {
- tp->dma_rwctrl |=
- DMA_RWCTRL_WRITE_BNDRY_384_PCIX;
- break;
- } else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
- tp->dma_rwctrl &=
- ~(DMA_RWCTRL_PCI_WRITE_CMD);
- tp->dma_rwctrl |=
- DMA_RWCTRL_WRITE_BNDRY_128_PCIE;
- break;
- }
- /* fallthrough */
- case 256:
- if (!(tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
- !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
- tp->dma_rwctrl |=
- DMA_RWCTRL_WRITE_BNDRY_256;
- else if (!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
- tp->dma_rwctrl |=
- DMA_RWCTRL_WRITE_BNDRY_256_PCIX;
- };
- }
-#endif
+ tp->dma_rwctrl = tg3_calc_dma_bndry(tp, tp->dma_rwctrl);
if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
/* DMA read watermark not used on PCIE */
@@ -8827,7 +9573,7 @@
if (ccval == 0x6 || ccval == 0x7)
tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
- /* Set bit 23 to renable PCIX hw bug fix */
+ /* Set bit 23 to enable PCIX hw bug fix */
tp->dma_rwctrl |= 0x009f0000;
} else {
tp->dma_rwctrl |= 0x001b000f;
@@ -8868,6 +9614,13 @@
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701)
goto out;
+ /* It is best to perform DMA test with maximum write burst size
+ * to expose the 5700/5701 write DMA bug.
+ */
+ saved_dma_rwctrl = tp->dma_rwctrl;
+ tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK;
+ tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
+
while (1) {
u32 *p = buf, i;
@@ -8906,8 +9659,9 @@
if (p[i] == i)
continue;
- if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) ==
- DMA_RWCTRL_WRITE_BNDRY_DISAB) {
+ if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) !=
+ DMA_RWCTRL_WRITE_BNDRY_16) {
+ tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK;
tp->dma_rwctrl |= DMA_RWCTRL_WRITE_BNDRY_16;
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
break;
@@ -8924,6 +9678,14 @@
break;
}
}
+ if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) !=
+ DMA_RWCTRL_WRITE_BNDRY_16) {
+ /* DMA test passed without adjusting DMA boundary,
+ * just restore the calculated DMA boundary
+ */
+ tp->dma_rwctrl = saved_dma_rwctrl;
+ tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
+ }
out:
pci_free_consistent(tp->pdev, TEST_BUFFER_SIZE, buf, buf_dma);
@@ -9011,6 +9773,31 @@
return peer;
}
+static void __devinit tg3_init_coal(struct tg3 *tp)
+{
+ struct ethtool_coalesce *ec = &tp->coal;
+
+ memset(ec, 0, sizeof(*ec));
+ ec->cmd = ETHTOOL_GCOALESCE;
+ ec->rx_coalesce_usecs = LOW_RXCOL_TICKS;
+ ec->tx_coalesce_usecs = LOW_TXCOL_TICKS;
+ ec->rx_max_coalesced_frames = LOW_RXMAX_FRAMES;
+ ec->tx_max_coalesced_frames = LOW_TXMAX_FRAMES;
+ ec->rx_coalesce_usecs_irq = DEFAULT_RXCOAL_TICK_INT;
+ ec->tx_coalesce_usecs_irq = DEFAULT_TXCOAL_TICK_INT;
+ ec->rx_max_coalesced_frames_irq = DEFAULT_RXCOAL_MAXF_INT;
+ ec->tx_max_coalesced_frames_irq = DEFAULT_TXCOAL_MAXF_INT;
+ ec->stats_block_coalesce_usecs = DEFAULT_STAT_COAL_TICKS;
+
+ if (tp->coalesce_mode & (HOSTCC_MODE_CLRTICK_RXBD |
+ HOSTCC_MODE_CLRTICK_TXBD)) {
+ ec->rx_coalesce_usecs = LOW_RXCOL_TICKS_CLRTCKS;
+ ec->rx_coalesce_usecs_irq = DEFAULT_RXCOAL_TICK_INT_CLRTCKS;
+ ec->tx_coalesce_usecs = LOW_TXCOL_TICKS_CLRTCKS;
+ ec->tx_coalesce_usecs_irq = DEFAULT_TXCOAL_TICK_INT_CLRTCKS;
+ }
+}
+
static int __devinit tg3_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -9232,7 +10019,7 @@
(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
pci_save_state(tp->pdev);
tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
}
err = tg3_test_dma(tp);
@@ -9256,6 +10043,8 @@
/* flow control autonegotiation is default behavior */
tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
+ tg3_init_coal(tp);
+
err = register_netdev(dev);
if (err) {
printk(KERN_ERR PFX "Cannot register net device, "
@@ -9298,6 +10087,8 @@
(tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0,
(tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0,
(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
+ printk(KERN_INFO "%s: dma_rwctrl[%08x]\n",
+ dev->name, tp->dma_rwctrl);
return 0;
@@ -9355,7 +10146,7 @@
spin_lock_irq(&tp->lock);
spin_lock(&tp->tx_lock);
- tg3_halt(tp, 1);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
spin_unlock(&tp->tx_lock);
spin_unlock_irq(&tp->lock);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 8de6f21..993f84c 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -876,10 +876,12 @@
#define HOSTCC_STATUS_ERROR_ATTN 0x00000004
#define HOSTCC_RXCOL_TICKS 0x00003c08
#define LOW_RXCOL_TICKS 0x00000032
+#define LOW_RXCOL_TICKS_CLRTCKS 0x00000014
#define DEFAULT_RXCOL_TICKS 0x00000048
#define HIGH_RXCOL_TICKS 0x00000096
#define HOSTCC_TXCOL_TICKS 0x00003c0c
#define LOW_TXCOL_TICKS 0x00000096
+#define LOW_TXCOL_TICKS_CLRTCKS 0x00000048
#define DEFAULT_TXCOL_TICKS 0x0000012c
#define HIGH_TXCOL_TICKS 0x00000145
#define HOSTCC_RXMAX_FRAMES 0x00003c10
@@ -892,8 +894,10 @@
#define HIGH_TXMAX_FRAMES 0x00000052
#define HOSTCC_RXCOAL_TICK_INT 0x00003c18
#define DEFAULT_RXCOAL_TICK_INT 0x00000019
+#define DEFAULT_RXCOAL_TICK_INT_CLRTCKS 0x00000014
#define HOSTCC_TXCOAL_TICK_INT 0x00003c1c
#define DEFAULT_TXCOAL_TICK_INT 0x00000019
+#define DEFAULT_TXCOAL_TICK_INT_CLRTCKS 0x00000014
#define HOSTCC_RXCOAL_MAXF_INT 0x00003c20
#define DEFAULT_RXCOAL_MAXF_INT 0x00000005
#define HOSTCC_TXCOAL_MAXF_INT 0x00003c24
@@ -2023,6 +2027,7 @@
struct tg3_hw_status *hw_status;
dma_addr_t status_mapping;
+ u32 last_tag;
u32 msg_enable;
@@ -2068,6 +2073,7 @@
u32 rx_offset;
u32 tg3_flags;
+#define TG3_FLAG_TAGGED_STATUS 0x00000001
#define TG3_FLAG_TXD_MBOX_HWBUG 0x00000002
#define TG3_FLAG_RX_CHECKSUMS 0x00000004
#define TG3_FLAG_USE_LINKCHG_REG 0x00000008
@@ -2225,7 +2231,7 @@
#define SST_25VF0X0_PAGE_SIZE 4098
-
+ struct ethtool_coalesce coal;
};
#endif /* !(_T3_H) */
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index a7ffa64..9680a30 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -193,6 +193,12 @@
static int duplex[MAX_TLAN_BOARDS];
static int speed[MAX_TLAN_BOARDS];
static int boards_found;
+module_param_array(aui, int, NULL, 0);
+module_param_array(duplex, int, NULL, 0);
+module_param_array(speed, int, NULL, 0);
+MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)");
+MODULE_PARM_DESC(duplex, "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)");
+MODULE_PARM_DESC(speed, "ThunderLAN port speen setting(s) (0,10,100)");
MODULE_AUTHOR("Maintainer: Samuel Chessman <chessman@tux.org>");
MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters");
@@ -204,8 +210,13 @@
/* Turn on debugging. See Documentation/networking/tlan.txt for details */
static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "ThunderLAN debug mask");
static int bbuf;
+module_param(bbuf, int, 0);
+MODULE_PARM_DESC(bbuf, "ThunderLAN use big buffer (0-1)");
+
static u8 *TLanPadBuffer;
static dma_addr_t TLanPadBufferDMA;
static char TLanSignature[] = "TLAN";
@@ -2381,6 +2392,7 @@
TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET );
return;
}
+ TLan_SetMulticastList(dev);
} /* TLan_FinishReset */
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index edae09a..919c40c 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -174,6 +174,7 @@
break;
}
spin_unlock_irqrestore(&tp->mii_lock, flags);
+ return;
}
/* Establish sync by sending 32 logic ones. */
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index d098b3b..e0ae3ed 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1104,7 +1104,7 @@
if (entry != 0) {
/* Avoid a chip errata by prefixing a dummy entry. Don't do
this on the ULI526X as it triggers a different problem */
- if (!(tp->chip_id == ULI526X && (tp->revision = 0x40 || tp->revision == 0x50))) {
+ if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) {
tp->tx_buffers[entry].skb = NULL;
tp->tx_buffers[entry].mapping = 0;
tp->tx_ring[entry].length =
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 0aaa12c..1d3231c 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -323,7 +323,7 @@
For a complete list of supported cards visit <http://prism54.org>.
Here is the latest confirmed list of supported cards:
- 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
+ 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
Allnet ALL0271 PCI Card
Compex WL54G Cardbus Card
Corega CG-WLCB54GT Cardbus Card
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 463c789..fb10a2d 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -754,7 +754,7 @@
u8 zero;
u8 ssidLen;
u8 ssid[32];
- u16 rssi;
+ u16 dBm;
#define CAP_ESS (1<<0)
#define CAP_IBSS (1<<1)
#define CAP_PRIVACY (1<<4)
@@ -1125,6 +1125,9 @@
static int encapsulate(struct airo_info *ai, etherHead *pPacket, MICBuffer *buffer, int len);
static int decapsulate(struct airo_info *ai, MICBuffer *mic, etherHead *pPacket, u16 payLen);
+static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi);
+static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm);
+
#include <linux/crypto.h>
#endif
@@ -1713,6 +1716,7 @@
list->fh.dwell = le16_to_cpu(list->fh.dwell);
list->dsChannel = le16_to_cpu(list->dsChannel);
list->atimWindow = le16_to_cpu(list->atimWindow);
+ list->dBm = le16_to_cpu(list->dBm);
return rc;
}
@@ -3245,7 +3249,10 @@
wstats.level = 0x100 - apriv->rssi[hdr.rssi[1]].rssidBm;
else
wstats.level = (hdr.rssi[1] + 321) / 2;
- wstats.updated = 3;
+ wstats.noise = apriv->wstats.qual.noise;
+ wstats.updated = IW_QUAL_LEVEL_UPDATED
+ | IW_QUAL_QUAL_UPDATED
+ | IW_QUAL_NOISE_UPDATED;
/* Update spy records */
wireless_spy_update(dev, sa, &wstats);
}
@@ -3588,7 +3595,10 @@
wstats.level = 0x100 - ai->rssi[hdr.rssi[1]].rssidBm;
else
wstats.level = (hdr.rssi[1] + 321) / 2;
- wstats.updated = 3;
+ wstats.noise = ai->wstats.qual.noise;
+ wstats.updated = IW_QUAL_QUAL_UPDATED
+ | IW_QUAL_LEVEL_UPDATED
+ | IW_QUAL_NOISE_UPDATED;
/* Update spy records */
wireless_spy_update(ai->dev, sa, &wstats);
}
@@ -3679,7 +3689,7 @@
status = PC4500_readrid(ai,RID_RSSI,&rssi_rid,sizeof(rssi_rid),lock);
if ( status == SUCCESS ) {
if (ai->rssi || (ai->rssi = kmalloc(512, GFP_KERNEL)) != NULL)
- memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512);
+ memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); /* Skip RID length member */
}
else {
if (ai->rssi) {
@@ -5348,7 +5358,7 @@
(int)BSSList_rid.bssid[5],
(int)BSSList_rid.ssidLen,
BSSList_rid.ssid,
- (int)BSSList_rid.rssi);
+ (int)BSSList_rid.dBm);
ptr += sprintf(ptr, " channel = %d %s %s %s %s\n",
(int)BSSList_rid.dsChannel,
BSSList_rid.cap & CAP_ESS ? "ESS" : "",
@@ -5593,6 +5603,29 @@
* would not work at all... - Jean II
*/
+static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi)
+{
+ if( !rssi_rid )
+ return 0;
+
+ return (0x100 - rssi_rid[rssi].rssidBm);
+}
+
+static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm)
+{
+ int i;
+
+ if( !rssi_rid )
+ return 0;
+
+ for( i = 0; i < 256; i++ )
+ if (rssi_rid[i].rssidBm == dbm)
+ return rssi_rid[i].rssipct;
+
+ return 0;
+}
+
+
static int airo_get_quality (StatusRid *status_rid, CapabilityRid *cap_rid)
{
int quality = 0;
@@ -6443,12 +6476,30 @@
}
range->num_frequency = k;
- /* Hum... Should put the right values there */
- range->max_qual.qual = airo_get_max_quality(&cap_rid);
- range->max_qual.level = 0x100 - 120; /* -120 dBm */
- range->max_qual.noise = 0;
range->sensitivity = 65535;
+ /* Hum... Should put the right values there */
+ if (local->rssi)
+ range->max_qual.qual = 100; /* % */
+ else
+ range->max_qual.qual = airo_get_max_quality(&cap_rid);
+ range->max_qual.level = 0; /* 0 means we use dBm */
+ range->max_qual.noise = 0;
+ range->max_qual.updated = 0;
+
+ /* Experimental measurements - boundary 11/5.5 Mb/s */
+ /* Note : with or without the (local->rssi), results
+ * are somewhat different. - Jean II */
+ if (local->rssi) {
+ range->avg_qual.qual = 50; /* % */
+ range->avg_qual.level = 186; /* -70 dBm */
+ } else {
+ range->avg_qual.qual = airo_get_avg_quality(&cap_rid);
+ range->avg_qual.level = 176; /* -80 dBm */
+ }
+ range->avg_qual.noise = 0;
+ range->avg_qual.updated = 0;
+
for(i = 0 ; i < 8 ; i++) {
range->bitrate[i] = cap_rid.supportedRates[i] * 500000;
if(range->bitrate[i] == 0)
@@ -6508,15 +6559,6 @@
range->max_retry = 65535;
range->min_r_time = 1024;
range->max_r_time = 65535 * 1024;
- /* Experimental measurements - boundary 11/5.5 Mb/s */
- /* Note : with or without the (local->rssi), results
- * are somewhat different. - Jean II */
- range->avg_qual.qual = airo_get_avg_quality(&cap_rid);
- if (local->rssi)
- range->avg_qual.level = 186; /* -70 dBm */
- else
- range->avg_qual.level = 176; /* -80 dBm */
- range->avg_qual.noise = 0;
/* Event capability (kernel + driver) */
range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
@@ -6676,12 +6718,18 @@
loseSync = 0;
memcpy(address[i].sa_data, BSSList.bssid, ETH_ALEN);
address[i].sa_family = ARPHRD_ETHER;
- if (local->rssi)
- qual[i].level = 0x100 - local->rssi[BSSList.rssi].rssidBm;
- else
- qual[i].level = (BSSList.rssi + 321) / 2;
- qual[i].qual = qual[i].noise = 0;
- qual[i].updated = 2;
+ if (local->rssi) {
+ qual[i].level = 0x100 - BSSList.dBm;
+ qual[i].qual = airo_dbm_to_pct( local->rssi, BSSList.dBm );
+ qual[i].updated = IW_QUAL_QUAL_UPDATED;
+ } else {
+ qual[i].level = (BSSList.dBm + 321) / 2;
+ qual[i].qual = 0;
+ qual[i].updated = IW_QUAL_QUAL_INVALID;
+ }
+ qual[i].noise = local->wstats.qual.noise;
+ qual[i].updated = IW_QUAL_LEVEL_UPDATED
+ | IW_QUAL_NOISE_UPDATED;
if (BSSList.index == 0xffff)
break;
}
@@ -6760,7 +6808,7 @@
static inline char *airo_translate_scan(struct net_device *dev,
char *current_ev,
char *end_buf,
- BSSListRid *list)
+ BSSListRid *bss)
{
struct airo_info *ai = dev->priv;
struct iw_event iwe; /* Temporary buffer */
@@ -6771,22 +6819,22 @@
/* First entry *MUST* be the AP MAC address */
iwe.cmd = SIOCGIWAP;
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
- memcpy(iwe.u.ap_addr.sa_data, list->bssid, ETH_ALEN);
+ memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN);
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
/* Other entries will be displayed in the order we give them */
/* Add the ESSID */
- iwe.u.data.length = list->ssidLen;
+ iwe.u.data.length = bss->ssidLen;
if(iwe.u.data.length > 32)
iwe.u.data.length = 32;
iwe.cmd = SIOCGIWESSID;
iwe.u.data.flags = 1;
- current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, list->ssid);
+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid);
/* Add mode */
iwe.cmd = SIOCGIWMODE;
- capabilities = le16_to_cpu(list->cap);
+ capabilities = le16_to_cpu(bss->cap);
if(capabilities & (CAP_ESS | CAP_IBSS)) {
if(capabilities & CAP_ESS)
iwe.u.mode = IW_MODE_MASTER;
@@ -6797,19 +6845,25 @@
/* Add frequency */
iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = le16_to_cpu(list->dsChannel);
+ iwe.u.freq.m = le16_to_cpu(bss->dsChannel);
iwe.u.freq.m = frequency_list[iwe.u.freq.m] * 100000;
iwe.u.freq.e = 1;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
/* Add quality statistics */
iwe.cmd = IWEVQUAL;
- if (ai->rssi)
- iwe.u.qual.level = 0x100 - ai->rssi[list->rssi].rssidBm;
- else
- iwe.u.qual.level = (list->rssi + 321) / 2;
- iwe.u.qual.noise = 0;
- iwe.u.qual.qual = 0;
+ if (ai->rssi) {
+ iwe.u.qual.level = 0x100 - bss->dBm;
+ iwe.u.qual.qual = airo_dbm_to_pct( ai->rssi, bss->dBm );
+ iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED;
+ } else {
+ iwe.u.qual.level = (bss->dBm + 321) / 2;
+ iwe.u.qual.qual = 0;
+ iwe.u.qual.updated = IW_QUAL_QUAL_INVALID;
+ }
+ iwe.u.qual.noise = ai->wstats.qual.noise;
+ iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED
+ | IW_QUAL_NOISE_UPDATED;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
/* Add encryption capability */
@@ -6819,7 +6873,7 @@
else
iwe.u.data.flags = IW_ENCODE_DISABLED;
iwe.u.data.length = 0;
- current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, list->ssid);
+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid);
/* Rate : stuffing multiple values in a single event require a bit
* more of magic - Jean II */
@@ -6831,10 +6885,10 @@
/* Max 8 values */
for(i = 0 ; i < 8 ; i++) {
/* NULL terminated */
- if(list->rates[i] == 0)
+ if(bss->rates[i] == 0)
break;
/* Bit rate given in 500 kb/s units (+ 0x80) */
- iwe.u.bitrate.value = ((list->rates[i] & 0x7f) * 500000);
+ iwe.u.bitrate.value = ((bss->rates[i] & 0x7f) * 500000);
/* Add new value to event */
current_val = iwe_stream_add_value(current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN);
}
@@ -7153,18 +7207,22 @@
/* The status */
local->wstats.status = status_rid.mode;
- /* Signal quality and co. But where is the noise level ??? */
- local->wstats.qual.qual = airo_get_quality(&status_rid, &cap_rid);
- if (local->rssi)
- local->wstats.qual.level = 0x100 - local->rssi[status_rid.sigQuality].rssidBm;
- else
+ /* Signal quality and co */
+ if (local->rssi) {
+ local->wstats.qual.level = airo_rssi_to_dbm( local->rssi, status_rid.sigQuality );
+ /* normalizedSignalStrength appears to be a percentage */
+ local->wstats.qual.qual = status_rid.normalizedSignalStrength;
+ } else {
local->wstats.qual.level = (status_rid.normalizedSignalStrength + 321) / 2;
+ local->wstats.qual.qual = airo_get_quality(&status_rid, &cap_rid);
+ }
+ local->wstats.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED;
if (status_rid.len >= 124) {
- local->wstats.qual.noise = 256 - status_rid.noisedBm;
- local->wstats.qual.updated = 7;
+ local->wstats.qual.noise = 0x100 - status_rid.noisedBm;
+ local->wstats.qual.updated |= IW_QUAL_NOISE_UPDATED;
} else {
local->wstats.qual.noise = 0;
- local->wstats.qual.updated = 3;
+ local->wstats.qual.updated |= IW_QUAL_NOISE_INVALID;
}
/* Packets discarded in the wireless adapter due to wireless
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index a91b507..a4ed28d 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -321,6 +321,7 @@
{ 0x01bf, 0x3302, NULL, ATMEL_FW_TYPE_502E, "Belkin F5D6020-V2" },
{ 0, 0, "BT/Voyager 1020 Laptop Adapter", ATMEL_FW_TYPE_502, "BT Voyager 1020" },
{ 0, 0, "IEEE 802.11b/Wireless LAN PC Card", ATMEL_FW_TYPE_502, "Siemens Gigaset PC Card II" },
+ { 0, 0, "IEEE 802.11b/Wireless LAN Card S", ATMEL_FW_TYPE_504_2958, "Siemens Gigaset PC Card II" },
{ 0, 0, "CNet/CNWLC 11Mbps Wireless PC Card V-5", ATMEL_FW_TYPE_502E, "CNet CNWLC-811ARL" },
{ 0, 0, "Wireless/PC_CARD", ATMEL_FW_TYPE_502D, "Planet WL-3552" },
{ 0, 0, "OEM/11Mbps Wireless LAN PC Card V-3", ATMEL_FW_TYPE_502, "OEM 11Mbps WLAN PCMCIA Card" },
diff --git a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c
index 021d0f7..3903f8c 100644
--- a/drivers/pci/hotplug.c
+++ b/drivers/pci/hotplug.c
@@ -52,116 +52,17 @@
if ((buffer_size - length <= 0) || (i >= num_envp))
return -ENOMEM;
+ envp[i++] = scratch;
+ length += scnprintf (scratch, buffer_size - length,
+ "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x\n",
+ pdev->vendor, pdev->device,
+ pdev->subsystem_vendor, pdev->subsystem_device,
+ (u8)(pdev->class >> 16), (u8)(pdev->class >> 8),
+ (u8)(pdev->class));
+ if ((buffer_size - length <= 0) || (i >= num_envp))
+ return -ENOMEM;
+
envp[i] = NULL;
return 0;
}
-
-static int pci_visit_bus (struct pci_visit * fn, struct pci_bus_wrapped *wrapped_bus, struct pci_dev_wrapped *wrapped_parent)
-{
- struct list_head *ln;
- struct pci_dev *dev;
- struct pci_dev_wrapped wrapped_dev;
- int result = 0;
-
- pr_debug("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(wrapped_bus->bus),
- wrapped_bus->bus->number);
-
- if (fn->pre_visit_pci_bus) {
- result = fn->pre_visit_pci_bus(wrapped_bus, wrapped_parent);
- if (result)
- return result;
- }
-
- ln = wrapped_bus->bus->devices.next;
- while (ln != &wrapped_bus->bus->devices) {
- dev = pci_dev_b(ln);
- ln = ln->next;
-
- memset(&wrapped_dev, 0, sizeof(struct pci_dev_wrapped));
- wrapped_dev.dev = dev;
-
- result = pci_visit_dev(fn, &wrapped_dev, wrapped_bus);
- if (result)
- return result;
- }
-
- if (fn->post_visit_pci_bus)
- result = fn->post_visit_pci_bus(wrapped_bus, wrapped_parent);
-
- return result;
-}
-
-static int pci_visit_bridge (struct pci_visit * fn,
- struct pci_dev_wrapped *wrapped_dev,
- struct pci_bus_wrapped *wrapped_parent)
-{
- struct pci_bus *bus;
- struct pci_bus_wrapped wrapped_bus;
- int result = 0;
-
- pr_debug("PCI: Scanning bridge %s\n", pci_name(wrapped_dev->dev));
-
- if (fn->visit_pci_dev) {
- result = fn->visit_pci_dev(wrapped_dev, wrapped_parent);
- if (result)
- return result;
- }
-
- bus = wrapped_dev->dev->subordinate;
- if (bus) {
- memset(&wrapped_bus, 0, sizeof(struct pci_bus_wrapped));
- wrapped_bus.bus = bus;
-
- result = pci_visit_bus(fn, &wrapped_bus, wrapped_dev);
- }
- return result;
-}
-
-/**
- * pci_visit_dev - scans the pci buses.
- * @fn: callback functions that are called while visiting
- * @wrapped_dev: the device to scan
- * @wrapped_parent: the bus where @wrapped_dev is connected to
- *
- * Every bus and every function is presented to a custom
- * function that can act upon it.
- */
-int pci_visit_dev(struct pci_visit *fn, struct pci_dev_wrapped *wrapped_dev,
- struct pci_bus_wrapped *wrapped_parent)
-{
- struct pci_dev* dev = wrapped_dev ? wrapped_dev->dev : NULL;
- int result = 0;
-
- if (!dev)
- return 0;
-
- if (fn->pre_visit_pci_dev) {
- result = fn->pre_visit_pci_dev(wrapped_dev, wrapped_parent);
- if (result)
- return result;
- }
-
- switch (dev->class >> 8) {
- case PCI_CLASS_BRIDGE_PCI:
- result = pci_visit_bridge(fn, wrapped_dev,
- wrapped_parent);
- if (result)
- return result;
- break;
- default:
- pr_debug("PCI: Scanning device %s\n", pci_name(dev));
- if (fn->visit_pci_dev) {
- result = fn->visit_pci_dev (wrapped_dev,
- wrapped_parent);
- if (result)
- return result;
- }
- }
-
- if (fn->post_visit_pci_dev)
- result = fn->post_visit_pci_dev(wrapped_dev, wrapped_parent);
-
- return result;
-}
-EXPORT_SYMBOL(pci_visit_dev);
diff --git a/drivers/pci/hotplug/cpci_hotplug.h b/drivers/pci/hotplug/cpci_hotplug.h
index 3ddd759..d9769b3 100644
--- a/drivers/pci/hotplug/cpci_hotplug.h
+++ b/drivers/pci/hotplug/cpci_hotplug.h
@@ -31,7 +31,7 @@
#include <linux/types.h>
#include <linux/pci.h>
-/* PICMG 2.12 R2.0 HS CSR bits: */
+/* PICMG 2.1 R2.0 HS CSR bits: */
#define HS_CSR_INS 0x0080
#define HS_CSR_EXT 0x0040
#define HS_CSR_PI 0x0030
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index ed24360..8132d94 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -1,7 +1,7 @@
/*
* CompactPCI Hot Plug Driver
*
- * Copyright (C) 2002 SOMA Networks, Inc.
+ * Copyright (C) 2002,2005 SOMA Networks, Inc.
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
*
@@ -33,11 +33,11 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/smp_lock.h>
+#include <asm/atomic.h>
#include <linux/delay.h>
#include "pci_hotplug.h"
#include "cpci_hotplug.h"
-#define DRIVER_VERSION "0.2"
#define DRIVER_AUTHOR "Scott Murray <scottm@somanetworks.com>"
#define DRIVER_DESC "CompactPCI Hot Plug Core"
@@ -45,18 +45,19 @@
#define dbg(format, arg...) \
do { \
- if(cpci_debug) \
+ if (cpci_debug) \
printk (KERN_DEBUG "%s: " format "\n", \
MY_NAME , ## arg); \
- } while(0)
+ } while (0)
#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
/* local variables */
-static spinlock_t list_lock;
+static DECLARE_RWSEM(list_rwsem);
static LIST_HEAD(slot_list);
static int slots;
+static atomic_t extracting;
int cpci_debug;
static struct cpci_hp_controller *controller;
static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */
@@ -68,6 +69,8 @@
static int set_attention_status(struct hotplug_slot *slot, u8 value);
static int get_power_status(struct hotplug_slot *slot, u8 * value);
static int get_attention_status(struct hotplug_slot *slot, u8 * value);
+static int get_adapter_status(struct hotplug_slot *slot, u8 * value);
+static int get_latch_status(struct hotplug_slot *slot, u8 * value);
static struct hotplug_slot_ops cpci_hotplug_slot_ops = {
.owner = THIS_MODULE,
@@ -76,6 +79,8 @@
.set_attention_status = set_attention_status,
.get_power_status = get_power_status,
.get_attention_status = get_attention_status,
+ .get_adapter_status = get_adapter_status,
+ .get_latch_status = get_latch_status,
};
static int
@@ -106,10 +111,8 @@
dbg("%s - physical_slot = %s", __FUNCTION__, hotplug_slot->name);
- if(controller->ops->set_power) {
+ if (controller->ops->set_power)
retval = controller->ops->set_power(slot, 1);
- }
-
return retval;
}
@@ -121,35 +124,41 @@
dbg("%s - physical_slot = %s", __FUNCTION__, hotplug_slot->name);
+ down_write(&list_rwsem);
+
/* Unconfigure device */
dbg("%s - unconfiguring slot %s",
__FUNCTION__, slot->hotplug_slot->name);
- if((retval = cpci_unconfigure_slot(slot))) {
+ if ((retval = cpci_unconfigure_slot(slot))) {
err("%s - could not unconfigure slot %s",
__FUNCTION__, slot->hotplug_slot->name);
- return retval;
+ goto disable_error;
}
dbg("%s - finished unconfiguring slot %s",
__FUNCTION__, slot->hotplug_slot->name);
/* Clear EXT (by setting it) */
- if(cpci_clear_ext(slot)) {
+ if (cpci_clear_ext(slot)) {
err("%s - could not clear EXT for slot %s",
__FUNCTION__, slot->hotplug_slot->name);
retval = -ENODEV;
+ goto disable_error;
}
cpci_led_on(slot);
- if(controller->ops->set_power) {
- retval = controller->ops->set_power(slot, 0);
- }
+ if (controller->ops->set_power)
+ if ((retval = controller->ops->set_power(slot, 0)))
+ goto disable_error;
- if(update_adapter_status(slot->hotplug_slot, 0)) {
+ if (update_adapter_status(slot->hotplug_slot, 0))
warn("failure to update adapter file");
+
+ if (slot->extracting) {
+ slot->extracting = 0;
+ atomic_dec(&extracting);
}
-
- slot->extracting = 0;
-
+disable_error:
+ up_write(&list_rwsem);
return retval;
}
@@ -158,9 +167,8 @@
{
u8 power = 1;
- if(controller->ops->get_power) {
+ if (controller->ops->get_power)
power = controller->ops->get_power(slot);
- }
return power;
}
@@ -188,6 +196,20 @@
return cpci_set_attention_status(hotplug_slot->private, status);
}
+static int
+get_adapter_status(struct hotplug_slot *hotplug_slot, u8 * value)
+{
+ *value = hotplug_slot->info->adapter_status;
+ return 0;
+}
+
+static int
+get_latch_status(struct hotplug_slot *hotplug_slot, u8 * value)
+{
+ *value = hotplug_slot->info->latch_status;
+ return 0;
+}
+
static void release_slot(struct hotplug_slot *hotplug_slot)
{
struct slot *slot = hotplug_slot->private;
@@ -216,9 +238,8 @@
int status = -ENOMEM;
int i;
- if(!(controller && bus)) {
+ if (!(controller && bus))
return -ENODEV;
- }
/*
* Create a structure for each slot, and register that slot
@@ -273,10 +294,10 @@
}
/* Add slot to our internal list */
- spin_lock(&list_lock);
+ down_write(&list_rwsem);
list_add(&slot->slot_list, &slot_list);
slots++;
- spin_unlock(&list_lock);
+ up_write(&list_rwsem);
}
return 0;
error_name:
@@ -295,32 +316,30 @@
cpci_hp_unregister_bus(struct pci_bus *bus)
{
struct slot *slot;
- struct list_head *tmp;
- struct list_head *next;
- int status;
+ struct slot *tmp;
+ int status = 0;
- spin_lock(&list_lock);
- if(!slots) {
- spin_unlock(&list_lock);
+ down_write(&list_rwsem);
+ if (!slots) {
+ up_write(&list_rwsem);
return -1;
}
- list_for_each_safe(tmp, next, &slot_list) {
- slot = list_entry(tmp, struct slot, slot_list);
- if(slot->bus == bus) {
- dbg("deregistering slot %s", slot->hotplug_slot->name);
- status = pci_hp_deregister(slot->hotplug_slot);
- if(status) {
- err("pci_hp_deregister failed with error %d",
- status);
- return status;
- }
-
+ list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) {
+ if (slot->bus == bus) {
list_del(&slot->slot_list);
slots--;
+
+ dbg("deregistering slot %s", slot->hotplug_slot->name);
+ status = pci_hp_deregister(slot->hotplug_slot);
+ if (status) {
+ err("pci_hp_deregister failed with error %d",
+ status);
+ break;
+ }
}
}
- spin_unlock(&list_lock);
- return 0;
+ up_write(&list_rwsem);
+ return status;
}
/* This is the interrupt mode interrupt handler */
@@ -330,7 +349,7 @@
dbg("entered cpci_hp_intr");
/* Check to see if it was our interrupt */
- if((controller->irq_flags & SA_SHIRQ) &&
+ if ((controller->irq_flags & SA_SHIRQ) &&
!controller->ops->check_irq(controller->dev_id)) {
dbg("exited cpci_hp_intr, not our interrupt");
return IRQ_NONE;
@@ -347,46 +366,38 @@
}
/*
- * According to PICMG 2.12 R2.0, section 6.3.2, upon
+ * According to PICMG 2.1 R2.0, section 6.3.2, upon
* initialization, the system driver shall clear the
* INS bits of the cold-inserted devices.
*/
static int
-init_slots(void)
+init_slots(int clear_ins)
{
struct slot *slot;
- struct list_head *tmp;
struct pci_dev* dev;
dbg("%s - enter", __FUNCTION__);
- spin_lock(&list_lock);
- if(!slots) {
- spin_unlock(&list_lock);
+ down_read(&list_rwsem);
+ if (!slots) {
+ up_read(&list_rwsem);
return -1;
}
- list_for_each(tmp, &slot_list) {
- slot = list_entry(tmp, struct slot, slot_list);
+ list_for_each_entry(slot, &slot_list, slot_list) {
dbg("%s - looking at slot %s",
__FUNCTION__, slot->hotplug_slot->name);
- if(cpci_check_and_clear_ins(slot)) {
+ if (clear_ins && cpci_check_and_clear_ins(slot))
dbg("%s - cleared INS for slot %s",
__FUNCTION__, slot->hotplug_slot->name);
- dev = pci_find_slot(slot->bus->number, PCI_DEVFN(slot->number, 0));
- if(dev) {
- if(update_adapter_status(slot->hotplug_slot, 1)) {
- warn("failure to update adapter file");
- }
- if(update_latch_status(slot->hotplug_slot, 1)) {
- warn("failure to update latch file");
- }
- slot->dev = dev;
- } else {
- err("%s - no driver attached to device in slot %s",
- __FUNCTION__, slot->hotplug_slot->name);
- }
+ dev = pci_get_slot(slot->bus, PCI_DEVFN(slot->number, 0));
+ if (dev) {
+ if (update_adapter_status(slot->hotplug_slot, 1))
+ warn("failure to update adapter file");
+ if (update_latch_status(slot->hotplug_slot, 1))
+ warn("failure to update latch file");
+ slot->dev = dev;
}
}
- spin_unlock(&list_lock);
+ up_read(&list_rwsem);
dbg("%s - exit", __FUNCTION__);
return 0;
}
@@ -395,27 +406,28 @@
check_slots(void)
{
struct slot *slot;
- struct list_head *tmp;
int extracted;
int inserted;
+ u16 hs_csr;
- spin_lock(&list_lock);
- if(!slots) {
- spin_unlock(&list_lock);
+ down_read(&list_rwsem);
+ if (!slots) {
+ up_read(&list_rwsem);
err("no slots registered, shutting down");
return -1;
}
extracted = inserted = 0;
- list_for_each(tmp, &slot_list) {
- slot = list_entry(tmp, struct slot, slot_list);
+ list_for_each_entry(slot, &slot_list, slot_list) {
dbg("%s - looking at slot %s",
__FUNCTION__, slot->hotplug_slot->name);
- if(cpci_check_and_clear_ins(slot)) {
- u16 hs_csr;
-
- /* Some broken hardware (e.g. PLX 9054AB) asserts ENUM# twice... */
- if(slot->dev) {
- warn("slot %s already inserted", slot->hotplug_slot->name);
+ if (cpci_check_and_clear_ins(slot)) {
+ /*
+ * Some broken hardware (e.g. PLX 9054AB) asserts
+ * ENUM# twice...
+ */
+ if (slot->dev) {
+ warn("slot %s already inserted",
+ slot->hotplug_slot->name);
inserted++;
continue;
}
@@ -432,7 +444,7 @@
/* Configure device */
dbg("%s - configuring slot %s",
__FUNCTION__, slot->hotplug_slot->name);
- if(cpci_configure_slot(slot)) {
+ if (cpci_configure_slot(slot)) {
err("%s - could not configure slot %s",
__FUNCTION__, slot->hotplug_slot->name);
continue;
@@ -445,13 +457,11 @@
dbg("%s - slot %s HS_CSR (2) = %04x",
__FUNCTION__, slot->hotplug_slot->name, hs_csr);
- if(update_latch_status(slot->hotplug_slot, 1)) {
+ if (update_latch_status(slot->hotplug_slot, 1))
warn("failure to update latch file");
- }
- if(update_adapter_status(slot->hotplug_slot, 1)) {
+ if (update_adapter_status(slot->hotplug_slot, 1))
warn("failure to update adapter file");
- }
cpci_led_off(slot);
@@ -461,9 +471,7 @@
__FUNCTION__, slot->hotplug_slot->name, hs_csr);
inserted++;
- } else if(cpci_check_ext(slot)) {
- u16 hs_csr;
-
+ } else if (cpci_check_ext(slot)) {
/* Process extraction request */
dbg("%s - slot %s extracted",
__FUNCTION__, slot->hotplug_slot->name);
@@ -473,23 +481,40 @@
dbg("%s - slot %s HS_CSR = %04x",
__FUNCTION__, slot->hotplug_slot->name, hs_csr);
- if(!slot->extracting) {
- if(update_latch_status(slot->hotplug_slot, 0)) {
+ if (!slot->extracting) {
+ if (update_latch_status(slot->hotplug_slot, 0)) {
warn("failure to update latch file");
}
slot->extracting = 1;
+ atomic_inc(&extracting);
}
extracted++;
+ } else if (slot->extracting) {
+ hs_csr = cpci_get_hs_csr(slot);
+ if (hs_csr == 0xffff) {
+ /*
+ * Hmmm, we're likely hosed at this point, should we
+ * bother trying to tell the driver or not?
+ */
+ err("card in slot %s was improperly removed",
+ slot->hotplug_slot->name);
+ if (update_adapter_status(slot->hotplug_slot, 0))
+ warn("failure to update adapter file");
+ slot->extracting = 0;
+ atomic_dec(&extracting);
+ }
}
}
- spin_unlock(&list_lock);
- if(inserted || extracted) {
+ up_read(&list_rwsem);
+ dbg("inserted=%d, extracted=%d, extracting=%d",
+ inserted, extracted, atomic_read(&extracting));
+ if (inserted || extracted)
return extracted;
- }
- else {
+ else if (!atomic_read(&extracting)) {
err("cannot find ENUM# source, shutting down");
return -1;
}
+ return 0;
}
/* This is the interrupt mode worker thread body */
@@ -497,54 +522,37 @@
event_thread(void *data)
{
int rc;
- struct slot *slot;
- struct list_head *tmp;
lock_kernel();
daemonize("cpci_hp_eventd");
unlock_kernel();
dbg("%s - event thread started", __FUNCTION__);
- while(1) {
+ while (1) {
dbg("event thread sleeping");
down_interruptible(&event_semaphore);
dbg("event thread woken, thread_finished = %d",
thread_finished);
- if(thread_finished || signal_pending(current))
+ if (thread_finished || signal_pending(current))
break;
- while(controller->ops->query_enum()) {
+ do {
rc = check_slots();
- if (rc > 0)
+ if (rc > 0) {
/* Give userspace a chance to handle extraction */
msleep(500);
- else if (rc < 0) {
+ } else if (rc < 0) {
dbg("%s - error checking slots", __FUNCTION__);
thread_finished = 1;
break;
}
- }
- /* Check for someone yanking out a board */
- list_for_each(tmp, &slot_list) {
- slot = list_entry(tmp, struct slot, slot_list);
- if(slot->extracting) {
- /*
- * Hmmm, we're likely hosed at this point, should we
- * bother trying to tell the driver or not?
- */
- err("card in slot %s was improperly removed",
- slot->hotplug_slot->name);
- if(update_adapter_status(slot->hotplug_slot, 0)) {
- warn("failure to update adapter file");
- }
- slot->extracting = 0;
- }
- }
+ } while (atomic_read(&extracting) && !thread_finished);
+ if (thread_finished)
+ break;
/* Re-enable ENUM# interrupt */
dbg("%s - re-enabling irq", __FUNCTION__);
controller->ops->enable_irq();
}
-
dbg("%s - event thread signals exit", __FUNCTION__);
up(&thread_exit);
return 0;
@@ -555,45 +563,27 @@
poll_thread(void *data)
{
int rc;
- struct slot *slot;
- struct list_head *tmp;
lock_kernel();
daemonize("cpci_hp_polld");
unlock_kernel();
- while(1) {
- if(thread_finished || signal_pending(current))
+ while (1) {
+ if (thread_finished || signal_pending(current))
break;
-
- while(controller->ops->query_enum()) {
- rc = check_slots();
- if(rc > 0)
- /* Give userspace a chance to handle extraction */
- msleep(500);
- else if (rc < 0) {
- dbg("%s - error checking slots", __FUNCTION__);
- thread_finished = 1;
- break;
- }
- }
- /* Check for someone yanking out a board */
- list_for_each(tmp, &slot_list) {
- slot = list_entry(tmp, struct slot, slot_list);
- if(slot->extracting) {
- /*
- * Hmmm, we're likely hosed at this point, should we
- * bother trying to tell the driver or not?
- */
- err("card in slot %s was improperly removed",
- slot->hotplug_slot->name);
- if(update_adapter_status(slot->hotplug_slot, 0)) {
- warn("failure to update adapter file");
+ if (controller->ops->query_enum()) {
+ do {
+ rc = check_slots();
+ if (rc > 0) {
+ /* Give userspace a chance to handle extraction */
+ msleep(500);
+ } else if (rc < 0) {
+ dbg("%s - error checking slots", __FUNCTION__);
+ thread_finished = 1;
+ break;
}
- slot->extracting = 0;
- }
+ } while (atomic_read(&extracting) && !thread_finished);
}
-
msleep(100);
}
dbg("poll thread signals exit");
@@ -611,12 +601,11 @@
init_MUTEX_LOCKED(&thread_exit);
thread_finished = 0;
- if(controller->irq) {
+ if (controller->irq)
pid = kernel_thread(event_thread, NULL, 0);
- } else {
+ else
pid = kernel_thread(poll_thread, NULL, 0);
- }
- if(pid < 0) {
+ if (pid < 0) {
err("Can't start up our thread");
return -1;
}
@@ -629,9 +618,8 @@
{
thread_finished = 1;
dbg("thread finish command given");
- if(controller->irq) {
+ if (controller->irq)
up(&event_semaphore);
- }
dbg("wait for thread to exit");
down(&thread_exit);
}
@@ -641,42 +629,67 @@
{
int status = 0;
- if(!controller) {
- controller = new_controller;
- if(controller->irq) {
- if(request_irq(controller->irq,
- cpci_hp_intr,
- controller->irq_flags,
- MY_NAME, controller->dev_id)) {
- err("Can't get irq %d for the hotplug cPCI controller", controller->irq);
- status = -ENODEV;
- }
- dbg("%s - acquired controller irq %d", __FUNCTION__,
- controller->irq);
+ if (controller)
+ return -1;
+ if (!(new_controller && new_controller->ops))
+ return -EINVAL;
+ if (new_controller->irq) {
+ if (!(new_controller->ops->enable_irq &&
+ new_controller->ops->disable_irq))
+ status = -EINVAL;
+ if (request_irq(new_controller->irq,
+ cpci_hp_intr,
+ new_controller->irq_flags,
+ MY_NAME,
+ new_controller->dev_id)) {
+ err("Can't get irq %d for the hotplug cPCI controller",
+ new_controller->irq);
+ status = -ENODEV;
}
- } else {
- err("cPCI hotplug controller already registered");
- status = -1;
+ dbg("%s - acquired controller irq %d",
+ __FUNCTION__, new_controller->irq);
}
+ if (!status)
+ controller = new_controller;
return status;
}
+static void
+cleanup_slots(void)
+{
+ struct slot *slot;
+ struct slot *tmp;
+
+ /*
+ * Unregister all of our slots with the pci_hotplug subsystem,
+ * and free up all memory that we had allocated.
+ */
+ down_write(&list_rwsem);
+ if (!slots)
+ goto cleanup_null;
+ list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) {
+ list_del(&slot->slot_list);
+ pci_hp_deregister(slot->hotplug_slot);
+ }
+cleanup_null:
+ up_write(&list_rwsem);
+ return;
+}
+
int
cpci_hp_unregister_controller(struct cpci_hp_controller *old_controller)
{
int status = 0;
- if(controller) {
- if(!thread_finished) {
+ if (controller) {
+ if (!thread_finished)
cpci_stop_thread();
- }
- if(controller->irq) {
+ if (controller->irq)
free_irq(controller->irq, controller->dev_id);
- }
controller = NULL;
- } else {
+ cleanup_slots();
+ } else
status = -ENODEV;
- }
return status;
}
@@ -687,32 +700,28 @@
int status;
dbg("%s - enter", __FUNCTION__);
- if(!controller) {
+ if (!controller)
+ return -ENODEV;
+
+ down_read(&list_rwsem);
+ if (list_empty(&slot_list)) {
+ up_read(&list_rwsem);
return -ENODEV;
}
+ up_read(&list_rwsem);
- spin_lock(&list_lock);
- if(!slots) {
- spin_unlock(&list_lock);
- return -ENODEV;
- }
- spin_unlock(&list_lock);
-
- if(first) {
- status = init_slots();
- if(status) {
- return status;
- }
+ status = init_slots(first);
+ if (first)
first = 0;
- }
+ if (status)
+ return status;
status = cpci_start_thread();
- if(status) {
+ if (status)
return status;
- }
dbg("%s - thread started", __FUNCTION__);
- if(controller->irq) {
+ if (controller->irq) {
/* Start enum interrupt processing */
dbg("%s - enabling irq", __FUNCTION__);
controller->ops->enable_irq();
@@ -724,11 +733,9 @@
int
cpci_hp_stop(void)
{
- if(!controller) {
+ if (!controller)
return -ENODEV;
- }
-
- if(controller->irq) {
+ if (controller->irq) {
/* Stop enum interrupt processing */
dbg("%s - disabling irq", __FUNCTION__);
controller->ops->disable_irq();
@@ -737,41 +744,10 @@
return 0;
}
-static void __exit
-cleanup_slots(void)
-{
- struct list_head *tmp;
- struct slot *slot;
-
- /*
- * Unregister all of our slots with the pci_hotplug subsystem,
- * and free up all memory that we had allocated.
- */
- spin_lock(&list_lock);
- if(!slots) {
- goto null_cleanup;
- }
- list_for_each(tmp, &slot_list) {
- slot = list_entry(tmp, struct slot, slot_list);
- list_del(&slot->slot_list);
- pci_hp_deregister(slot->hotplug_slot);
- kfree(slot->hotplug_slot->info);
- kfree(slot->hotplug_slot->name);
- kfree(slot->hotplug_slot);
- kfree(slot);
- }
- null_cleanup:
- spin_unlock(&list_lock);
- return;
-}
-
int __init
cpci_hotplug_init(int debug)
{
- spin_lock_init(&list_lock);
cpci_debug = debug;
-
- info(DRIVER_DESC " version: " DRIVER_VERSION);
return 0;
}
@@ -781,7 +757,8 @@
/*
* Clean everything up.
*/
- cleanup_slots();
+ cpci_hp_stop();
+ cpci_hp_unregister_controller(controller);
}
EXPORT_SYMBOL_GPL(cpci_hp_register_controller);
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index 2e96961..c878028 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -1,7 +1,7 @@
/*
* CompactPCI Hot Plug Driver PCI functions
*
- * Copyright (C) 2002 by SOMA Networks, Inc.
+ * Copyright (C) 2002,2005 by SOMA Networks, Inc.
*
* All rights reserved.
*
@@ -32,20 +32,16 @@
#include "pci_hotplug.h"
#include "cpci_hotplug.h"
-#if !defined(MODULE)
#define MY_NAME "cpci_hotplug"
-#else
-#define MY_NAME THIS_MODULE->name
-#endif
extern int cpci_debug;
#define dbg(format, arg...) \
do { \
- if(cpci_debug) \
+ if (cpci_debug) \
printk (KERN_DEBUG "%s: " format "\n", \
MY_NAME , ## arg); \
- } while(0)
+ } while (0)
#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
@@ -61,16 +57,15 @@
hs_cap = pci_bus_find_capability(slot->bus,
slot->devfn,
PCI_CAP_ID_CHSWP);
- if(!hs_cap) {
+ if (!hs_cap)
return 0;
- }
- if(pci_bus_read_config_word(slot->bus,
+ if (pci_bus_read_config_word(slot->bus,
slot->devfn,
hs_cap + 2,
- &hs_csr)) {
+ &hs_csr))
return 0;
- }
+
return hs_csr & 0x0008 ? 1 : 0;
}
@@ -82,27 +77,22 @@
hs_cap = pci_bus_find_capability(slot->bus,
slot->devfn,
PCI_CAP_ID_CHSWP);
- if(!hs_cap) {
+ if (!hs_cap)
return 0;
- }
-
- if(pci_bus_read_config_word(slot->bus,
+ if (pci_bus_read_config_word(slot->bus,
slot->devfn,
hs_cap + 2,
- &hs_csr)) {
+ &hs_csr))
return 0;
- }
- if(status) {
+ if (status)
hs_csr |= HS_CSR_LOO;
- } else {
+ else
hs_csr &= ~HS_CSR_LOO;
- }
- if(pci_bus_write_config_word(slot->bus,
+ if (pci_bus_write_config_word(slot->bus,
slot->devfn,
hs_cap + 2,
- hs_csr)) {
+ hs_csr))
return 0;
- }
return 1;
}
@@ -114,51 +104,16 @@
hs_cap = pci_bus_find_capability(slot->bus,
slot->devfn,
PCI_CAP_ID_CHSWP);
- if(!hs_cap) {
+ if (!hs_cap)
return 0xFFFF;
- }
-
- if(pci_bus_read_config_word(slot->bus,
+ if (pci_bus_read_config_word(slot->bus,
slot->devfn,
hs_cap + 2,
- &hs_csr)) {
+ &hs_csr))
return 0xFFFF;
- }
return hs_csr;
}
-#if 0
-u16 cpci_set_hs_csr(struct slot* slot, u16 hs_csr)
-{
- int hs_cap;
- u16 new_hs_csr;
-
- hs_cap = pci_bus_find_capability(slot->bus,
- slot->devfn,
- PCI_CAP_ID_CHSWP);
- if(!hs_cap) {
- return 0xFFFF;
- }
-
- /* Write out the new value */
- if(pci_bus_write_config_word(slot->bus,
- slot->devfn,
- hs_cap + 2,
- hs_csr)) {
- return 0xFFFF;
- }
-
- /* Read back what we just wrote out */
- if(pci_bus_read_config_word(slot->bus,
- slot->devfn,
- hs_cap + 2,
- &new_hs_csr)) {
- return 0xFFFF;
- }
- return new_hs_csr;
-}
-#endif
-
int cpci_check_and_clear_ins(struct slot* slot)
{
int hs_cap;
@@ -168,24 +123,22 @@
hs_cap = pci_bus_find_capability(slot->bus,
slot->devfn,
PCI_CAP_ID_CHSWP);
- if(!hs_cap) {
+ if (!hs_cap)
return 0;
- }
- if(pci_bus_read_config_word(slot->bus,
+ if (pci_bus_read_config_word(slot->bus,
slot->devfn,
hs_cap + 2,
- &hs_csr)) {
+ &hs_csr))
return 0;
- }
- if(hs_csr & HS_CSR_INS) {
+ if (hs_csr & HS_CSR_INS) {
/* Clear INS (by setting it) */
- if(pci_bus_write_config_word(slot->bus,
+ if (pci_bus_write_config_word(slot->bus,
slot->devfn,
hs_cap + 2,
- hs_csr)) {
+ hs_csr))
ins = 0;
- }
- ins = 1;
+ else
+ ins = 1;
}
return ins;
}
@@ -199,18 +152,15 @@
hs_cap = pci_bus_find_capability(slot->bus,
slot->devfn,
PCI_CAP_ID_CHSWP);
- if(!hs_cap) {
+ if (!hs_cap)
return 0;
- }
- if(pci_bus_read_config_word(slot->bus,
+ if (pci_bus_read_config_word(slot->bus,
slot->devfn,
hs_cap + 2,
- &hs_csr)) {
+ &hs_csr))
return 0;
- }
- if(hs_csr & HS_CSR_EXT) {
+ if (hs_csr & HS_CSR_EXT)
ext = 1;
- }
return ext;
}
@@ -222,23 +172,20 @@
hs_cap = pci_bus_find_capability(slot->bus,
slot->devfn,
PCI_CAP_ID_CHSWP);
- if(!hs_cap) {
+ if (!hs_cap)
return -ENODEV;
- }
- if(pci_bus_read_config_word(slot->bus,
+ if (pci_bus_read_config_word(slot->bus,
slot->devfn,
hs_cap + 2,
- &hs_csr)) {
+ &hs_csr))
return -ENODEV;
- }
- if(hs_csr & HS_CSR_EXT) {
+ if (hs_csr & HS_CSR_EXT) {
/* Clear EXT (by setting it) */
- if(pci_bus_write_config_word(slot->bus,
+ if (pci_bus_write_config_word(slot->bus,
slot->devfn,
hs_cap + 2,
- hs_csr)) {
+ hs_csr))
return -ENODEV;
- }
}
return 0;
}
@@ -251,19 +198,16 @@
hs_cap = pci_bus_find_capability(slot->bus,
slot->devfn,
PCI_CAP_ID_CHSWP);
- if(!hs_cap) {
+ if (!hs_cap)
return -ENODEV;
- }
- if(pci_bus_read_config_word(slot->bus,
+ if (pci_bus_read_config_word(slot->bus,
slot->devfn,
hs_cap + 2,
- &hs_csr)) {
+ &hs_csr))
return -ENODEV;
- }
- if((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) {
- /* Set LOO */
+ if ((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) {
hs_csr |= HS_CSR_LOO;
- if(pci_bus_write_config_word(slot->bus,
+ if (pci_bus_write_config_word(slot->bus,
slot->devfn,
hs_cap + 2,
hs_csr)) {
@@ -283,19 +227,16 @@
hs_cap = pci_bus_find_capability(slot->bus,
slot->devfn,
PCI_CAP_ID_CHSWP);
- if(!hs_cap) {
+ if (!hs_cap)
return -ENODEV;
- }
- if(pci_bus_read_config_word(slot->bus,
+ if (pci_bus_read_config_word(slot->bus,
slot->devfn,
hs_cap + 2,
- &hs_csr)) {
+ &hs_csr))
return -ENODEV;
- }
- if(hs_csr & HS_CSR_LOO) {
- /* Clear LOO */
+ if (hs_csr & HS_CSR_LOO) {
hs_csr &= ~HS_CSR_LOO;
- if(pci_bus_write_config_word(slot->bus,
+ if (pci_bus_write_config_word(slot->bus,
slot->devfn,
hs_cap + 2,
hs_csr)) {
@@ -312,268 +253,21 @@
* Device configuration functions
*/
-static int cpci_configure_dev(struct pci_bus *bus, struct pci_dev *dev)
-{
- u8 irq_pin;
- int r;
-
- dbg("%s - enter", __FUNCTION__);
-
- /* NOTE: device already setup from prior scan */
-
- /* FIXME: How would we know if we need to enable the expansion ROM? */
- pci_write_config_word(dev, PCI_ROM_ADDRESS, 0x00L);
-
- /* Assign resources */
- dbg("assigning resources for %02x:%02x.%x",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- for (r = 0; r < 6; r++) {
- struct resource *res = dev->resource + r;
- if(res->flags)
- pci_assign_resource(dev, r);
- }
- dbg("finished assigning resources for %02x:%02x.%x",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-
- /* Does this function have an interrupt at all? */
- dbg("checking for function interrupt");
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq_pin);
- if(irq_pin) {
- dbg("function uses interrupt pin %d", irq_pin);
- }
-
- /*
- * Need to explicitly set irq field to 0 so that it'll get assigned
- * by the pcibios platform dependent code called by pci_enable_device.
- */
- dev->irq = 0;
-
- dbg("enabling device");
- pci_enable_device(dev); /* XXX check return */
- dbg("now dev->irq = %d", dev->irq);
- if(irq_pin && dev->irq) {
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- }
-
- /* Can't use pci_insert_device at the moment, do it manually for now */
- pci_proc_attach_device(dev);
- dbg("notifying drivers");
- //pci_announce_device_to_drivers(dev);
- dbg("%s - exit", __FUNCTION__);
- return 0;
-}
-
-static int cpci_configure_bridge(struct pci_bus* bus, struct pci_dev* dev)
-{
- int rc;
- struct pci_bus* child;
- struct resource* r;
- u8 max, n;
- u16 command;
-
- dbg("%s - enter", __FUNCTION__);
-
- /* Do basic bridge initialization */
- rc = pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40);
- if(rc) {
- printk(KERN_ERR "%s - write of PCI_LATENCY_TIMER failed\n", __FUNCTION__);
- }
- rc = pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40);
- if(rc) {
- printk(KERN_ERR "%s - write of PCI_SEC_LATENCY_TIMER failed\n", __FUNCTION__);
- }
- rc = pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES / 4);
- if(rc) {
- printk(KERN_ERR "%s - write of PCI_CACHE_LINE_SIZE failed\n", __FUNCTION__);
- }
-
- /*
- * Set parent bridge's subordinate field so that configuration space
- * access will work in pci_scan_bridge and friends.
- */
- max = pci_max_busnr();
- bus->subordinate = max + 1;
- pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, max + 1);
-
- /* Scan behind bridge */
- n = pci_scan_bridge(bus, dev, max, 2);
- child = pci_find_bus(0, max + 1);
- if (!child)
- return -ENODEV;
- pci_proc_attach_bus(child);
-
- /*
- * Update parent bridge's subordinate field if there were more bridges
- * behind the bridge that was scanned.
- */
- if(n > max) {
- bus->subordinate = n;
- pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, n);
- }
-
- /*
- * Update the bridge resources of the bridge to accommodate devices
- * behind it.
- */
- pci_bus_size_bridges(child);
- pci_bus_assign_resources(child);
-
- /* Enable resource mapping via command register */
- command = PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- r = child->resource[0];
- if(r && r->start) {
- command |= PCI_COMMAND_IO;
- }
- r = child->resource[1];
- if(r && r->start) {
- command |= PCI_COMMAND_MEMORY;
- }
- r = child->resource[2];
- if(r && r->start) {
- command |= PCI_COMMAND_MEMORY;
- }
- rc = pci_write_config_word(dev, PCI_COMMAND, command);
- if(rc) {
- err("Error setting command register");
- return rc;
- }
-
- /* Set bridge control register */
- command = PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR | PCI_BRIDGE_CTL_NO_ISA;
- rc = pci_write_config_word(dev, PCI_BRIDGE_CONTROL, command);
- if(rc) {
- err("Error setting bridge control register");
- return rc;
- }
- dbg("%s - exit", __FUNCTION__);
- return 0;
-}
-
-static int configure_visit_pci_dev(struct pci_dev_wrapped *wrapped_dev,
- struct pci_bus_wrapped *wrapped_bus)
-{
- int rc;
- struct pci_dev *dev = wrapped_dev->dev;
- struct pci_bus *bus = wrapped_bus->bus;
- struct slot* slot;
-
- dbg("%s - enter", __FUNCTION__);
-
- /*
- * We need to fix up the hotplug representation with the Linux
- * representation.
- */
- if(wrapped_dev->data) {
- slot = (struct slot*) wrapped_dev->data;
- slot->dev = dev;
- }
-
- /* If it's a bridge, scan behind it for devices */
- if(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- rc = cpci_configure_bridge(bus, dev);
- if(rc)
- return rc;
- }
-
- /* Actually configure device */
- if(dev) {
- rc = cpci_configure_dev(bus, dev);
- if(rc)
- return rc;
- }
- dbg("%s - exit", __FUNCTION__);
- return 0;
-}
-
-static int unconfigure_visit_pci_dev_phase2(struct pci_dev_wrapped *wrapped_dev,
- struct pci_bus_wrapped *wrapped_bus)
-{
- struct pci_dev *dev = wrapped_dev->dev;
- struct slot* slot;
-
- dbg("%s - enter", __FUNCTION__);
- if(!dev)
- return -ENODEV;
-
- /* Remove the Linux representation */
- if(pci_remove_device_safe(dev)) {
- err("Could not remove device\n");
- return -1;
- }
-
- /*
- * Now remove the hotplug representation.
- */
- if(wrapped_dev->data) {
- slot = (struct slot*) wrapped_dev->data;
- slot->dev = NULL;
- } else {
- dbg("No hotplug representation for %02x:%02x.%x",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- }
- dbg("%s - exit", __FUNCTION__);
- return 0;
-}
-
-static int unconfigure_visit_pci_bus_phase2(struct pci_bus_wrapped *wrapped_bus,
- struct pci_dev_wrapped *wrapped_dev)
-{
- struct pci_bus *bus = wrapped_bus->bus;
- struct pci_bus *parent = bus->self->bus;
-
- dbg("%s - enter", __FUNCTION__);
-
- /* The cleanup code for proc entries regarding buses should be in the kernel... */
- if(bus->procdir)
- dbg("detach_pci_bus %s", bus->procdir->name);
- pci_proc_detach_bus(bus);
-
- /* The cleanup code should live in the kernel... */
- bus->self->subordinate = NULL;
-
- /* unlink from parent bus */
- list_del(&bus->node);
-
- /* Now, remove */
- if(bus)
- kfree(bus);
-
- /* Update parent's subordinate field */
- if(parent) {
- u8 n = pci_bus_max_busnr(parent);
- if(n < parent->subordinate) {
- parent->subordinate = n;
- pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, n);
- }
- }
- dbg("%s - exit", __FUNCTION__);
- return 0;
-}
-
-static struct pci_visit configure_functions = {
- .visit_pci_dev = configure_visit_pci_dev,
-};
-
-static struct pci_visit unconfigure_functions_phase2 = {
- .post_visit_pci_bus = unconfigure_visit_pci_bus_phase2,
- .post_visit_pci_dev = unconfigure_visit_pci_dev_phase2
-};
-
-
int cpci_configure_slot(struct slot* slot)
{
- int rc = 0;
+ unsigned char busnr;
+ struct pci_bus *child;
dbg("%s - enter", __FUNCTION__);
- if(slot->dev == NULL) {
+ if (slot->dev == NULL) {
dbg("pci_dev null, finding %02x:%02x:%x",
slot->bus->number, PCI_SLOT(slot->devfn), PCI_FUNC(slot->devfn));
- slot->dev = pci_find_slot(slot->bus->number, slot->devfn);
+ slot->dev = pci_get_slot(slot->bus, slot->devfn);
}
/* Still NULL? Well then scan for it! */
- if(slot->dev == NULL) {
+ if (slot->dev == NULL) {
int n;
dbg("pci_dev still null");
@@ -583,79 +277,47 @@
*/
n = pci_scan_slot(slot->bus, slot->devfn);
dbg("%s: pci_scan_slot returned %d", __FUNCTION__, n);
- if(n > 0)
+ if (n > 0)
pci_bus_add_devices(slot->bus);
- slot->dev = pci_find_slot(slot->bus->number, slot->devfn);
- if(slot->dev == NULL) {
+ slot->dev = pci_get_slot(slot->bus, slot->devfn);
+ if (slot->dev == NULL) {
err("Could not find PCI device for slot %02x", slot->number);
- return 0;
- }
- }
- dbg("slot->dev = %p", slot->dev);
- if(slot->dev) {
- struct pci_dev *dev;
- struct pci_dev_wrapped wrapped_dev;
- struct pci_bus_wrapped wrapped_bus;
- int i;
-
- memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped));
- memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped));
-
- for (i = 0; i < 8; i++) {
- dev = pci_find_slot(slot->bus->number,
- PCI_DEVFN(PCI_SLOT(slot->dev->devfn), i));
- if(!dev)
- continue;
- wrapped_dev.dev = dev;
- wrapped_bus.bus = slot->dev->bus;
- if(i)
- wrapped_dev.data = NULL;
- else
- wrapped_dev.data = (void*) slot;
- rc = pci_visit_dev(&configure_functions, &wrapped_dev, &wrapped_bus);
+ return 1;
}
}
- dbg("%s - exit, rc = %d", __FUNCTION__, rc);
- return rc;
+ if (slot->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ pci_read_config_byte(slot->dev, PCI_SECONDARY_BUS, &busnr);
+ child = pci_add_new_bus(slot->dev->bus, slot->dev, busnr);
+ pci_do_scan_bus(child);
+ pci_bus_size_bridges(child);
+ }
+
+ pci_bus_assign_resources(slot->dev->bus);
+
+ dbg("%s - exit", __FUNCTION__);
+ return 0;
}
int cpci_unconfigure_slot(struct slot* slot)
{
- int rc = 0;
int i;
- struct pci_dev_wrapped wrapped_dev;
- struct pci_bus_wrapped wrapped_bus;
struct pci_dev *dev;
dbg("%s - enter", __FUNCTION__);
-
- if(!slot->dev) {
+ if (!slot->dev) {
err("No device for slot %02x\n", slot->number);
return -ENODEV;
}
- memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped));
- memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped));
-
for (i = 0; i < 8; i++) {
- dev = pci_find_slot(slot->bus->number,
+ dev = pci_get_slot(slot->bus,
PCI_DEVFN(PCI_SLOT(slot->devfn), i));
- if(dev) {
- wrapped_dev.dev = dev;
- wrapped_bus.bus = dev->bus;
- if(i)
- wrapped_dev.data = NULL;
- else
- wrapped_dev.data = (void*) slot;
- dbg("%s - unconfigure phase 2", __FUNCTION__);
- rc = pci_visit_dev(&unconfigure_functions_phase2,
- &wrapped_dev,
- &wrapped_bus);
- if(rc)
- break;
+ if (dev) {
+ pci_remove_bus_device(dev);
+ slot->dev = NULL;
}
}
- dbg("%s - exit, rc = %d", __FUNCTION__, rc);
- return rc;
+ dbg("%s - exit", __FUNCTION__);
+ return 0;
}
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index f313121..46b294a 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -130,6 +130,7 @@
u8 slot_bus; /* Bus where the slots handled by this controller sit */
u8 ctrlcap;
u16 vendor_id;
+ u8 cap_base;
};
struct irq_mapping {
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index ed1fd8d..df4915d 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -607,7 +607,7 @@
static struct pcie_port_service_id port_pci_ids[] = { {
.vendor = PCI_ANY_ID,
.device = PCI_ANY_ID,
- .port_type = PCIE_RC_PORT,
+ .port_type = PCIE_ANY_PORT,
.service_type = PCIE_PORT_SERVICE_HP,
.driver_data = 0,
}, { /* end: all zeroes */ }
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 9e70c46..1cda30b 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -109,20 +109,20 @@
};
static int pcie_cap_base = 0; /* Base of the PCI Express capability item structure */
-#define PCIE_CAP_ID ( pcie_cap_base + PCIECAPID )
-#define NXT_CAP_PTR ( pcie_cap_base + NXTCAPPTR )
-#define CAP_REG ( pcie_cap_base + CAPREG )
-#define DEV_CAP ( pcie_cap_base + DEVCAP )
-#define DEV_CTRL ( pcie_cap_base + DEVCTRL )
-#define DEV_STATUS ( pcie_cap_base + DEVSTATUS )
-#define LNK_CAP ( pcie_cap_base + LNKCAP )
-#define LNK_CTRL ( pcie_cap_base + LNKCTRL )
-#define LNK_STATUS ( pcie_cap_base + LNKSTATUS )
-#define SLOT_CAP ( pcie_cap_base + SLOTCAP )
-#define SLOT_CTRL ( pcie_cap_base + SLOTCTRL )
-#define SLOT_STATUS ( pcie_cap_base + SLOTSTATUS )
-#define ROOT_CTRL ( pcie_cap_base + ROOTCTRL )
-#define ROOT_STATUS ( pcie_cap_base + ROOTSTATUS )
+#define PCIE_CAP_ID(cb) ( cb + PCIECAPID )
+#define NXT_CAP_PTR(cb) ( cb + NXTCAPPTR )
+#define CAP_REG(cb) ( cb + CAPREG )
+#define DEV_CAP(cb) ( cb + DEVCAP )
+#define DEV_CTRL(cb) ( cb + DEVCTRL )
+#define DEV_STATUS(cb) ( cb + DEVSTATUS )
+#define LNK_CAP(cb) ( cb + LNKCAP )
+#define LNK_CTRL(cb) ( cb + LNKCTRL )
+#define LNK_STATUS(cb) ( cb + LNKSTATUS )
+#define SLOT_CAP(cb) ( cb + SLOTCAP )
+#define SLOT_CTRL(cb) ( cb + SLOTCTRL )
+#define SLOT_STATUS(cb) ( cb + SLOTSTATUS )
+#define ROOT_CTRL(cb) ( cb + ROOTCTRL )
+#define ROOT_STATUS(cb) ( cb + ROOTSTATUS )
#define hp_register_read_word(pdev, reg , value) \
pci_read_config_word(pdev, reg, &value)
@@ -303,7 +303,7 @@
return -1;
}
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+ retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status);
if (retval) {
err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
return retval;
@@ -317,7 +317,7 @@
}
dbg("%s: Before hp_register_write_word SLOT_CTRL %x\n", __FUNCTION__, cmd);
- retval = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL, cmd | CMD_CMPL_INTR_ENABLE);
+ retval = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), cmd | CMD_CMPL_INTR_ENABLE);
if (retval) {
err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
return retval;
@@ -342,7 +342,7 @@
return -1;
}
- retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS, lnk_status);
+ retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS(ctrl->cap_base), lnk_status);
if (retval) {
err("%s : hp_register_read_word LNK_STATUS failed\n", __FUNCTION__);
@@ -376,14 +376,14 @@
return -1;
}
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+ retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
if (retval) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
return retval;
}
- dbg("%s: SLOT_CTRL %x, value read %x\n", __FUNCTION__,SLOT_CTRL, slot_ctrl);
+ dbg("%s: SLOT_CTRL %x, value read %x\n", __FUNCTION__,SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
atten_led_state = (slot_ctrl & ATTN_LED_CTRL) >> 6;
@@ -423,13 +423,13 @@
return -1;
}
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+ retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
if (retval) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
return retval;
}
- dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL, slot_ctrl);
+ dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
pwr_state = (slot_ctrl & PWR_CTRL) >> 10;
@@ -463,7 +463,7 @@
return -1;
}
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+ retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status);
if (retval) {
err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
@@ -490,7 +490,7 @@
return -1;
}
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+ retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status);
if (retval) {
err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
@@ -518,7 +518,7 @@
return -1;
}
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+ retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status);
if (retval) {
err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
@@ -549,7 +549,7 @@
err("%s: Invalid HPC slot number!\n", __FUNCTION__);
return -1;
}
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+ rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
if (rc) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
@@ -574,7 +574,7 @@
slot_cmd = slot_cmd | HP_INTR_ENABLE;
pcie_write_cmd(slot, slot_cmd);
- dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL, slot_cmd);
+ dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
return rc;
}
@@ -598,7 +598,7 @@
return ;
}
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+ rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
if (rc) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
@@ -611,7 +611,7 @@
pcie_write_cmd(slot, slot_cmd);
- dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL, slot_cmd);
+ dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
return;
}
@@ -633,7 +633,7 @@
return ;
}
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+ rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
if (rc) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
@@ -646,7 +646,7 @@
if (!pciehp_poll_mode)
slot_cmd = slot_cmd | HP_INTR_ENABLE;
pcie_write_cmd(slot, slot_cmd);
- dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL, slot_cmd);
+ dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
return;
}
@@ -669,7 +669,7 @@
return ;
}
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+ rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
if (rc) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
@@ -683,7 +683,7 @@
slot_cmd = slot_cmd | HP_INTR_ENABLE;
pcie_write_cmd(slot, slot_cmd);
- dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL, slot_cmd);
+ dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
return;
}
@@ -707,7 +707,7 @@
*first_device_num = 0;
*num_ctlr_slots = 1;
- rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP, slot_cap);
+ rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP(ctrl->cap_base), slot_cap);
if (rc) {
err("%s : hp_register_read_dword SLOT_CAP failed\n", __FUNCTION__);
@@ -793,13 +793,13 @@
return -1;
}
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+ retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
if (retval) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
return retval;
}
- dbg("%s: SLOT_CTRL %x, value read %xn", __FUNCTION__, SLOT_CTRL,
+ dbg("%s: SLOT_CTRL %x, value read %xn", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base),
slot_ctrl);
slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_ON;
@@ -813,7 +813,7 @@
err("%s: Write %x command failed!\n", __FUNCTION__, slot_cmd);
return -1;
}
- dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL, slot_cmd);
+ dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
DBG_LEAVE_ROUTINE
@@ -842,13 +842,13 @@
err("%s: Invalid HPC slot number!\n", __FUNCTION__);
return -1;
}
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+ retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
if (retval) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
return retval;
}
- dbg("%s: SLOT_CTRL %x, value read %x\n", __FUNCTION__, SLOT_CTRL,
+ dbg("%s: SLOT_CTRL %x, value read %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base),
slot_ctrl);
slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_OFF;
@@ -862,7 +862,7 @@
err("%s: Write command failed!\n", __FUNCTION__);
return -1;
}
- dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL, slot_cmd);
+ dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
DBG_LEAVE_ROUTINE
@@ -900,7 +900,7 @@
return IRQ_NONE;
}
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+ rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
if (rc) {
err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
return IRQ_NONE;
@@ -918,7 +918,7 @@
dbg("%s: intr_loc %x\n", __FUNCTION__, intr_loc);
/* Mask Hot-plug Interrupt Enable */
if (!pciehp_poll_mode) {
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, temp_word);
+ rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
return IRQ_NONE;
@@ -928,14 +928,14 @@
dbg("%s: hp_register_read_word SLOT_CTRL with value %x\n", __FUNCTION__, temp_word);
temp_word = (temp_word & ~HP_INTR_ENABLE & ~CMD_CMPL_INTR_ENABLE) | 0x00;
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL, temp_word);
+ rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
return IRQ_NONE;
}
dbg("%s: hp_register_write_word SLOT_CTRL with value %x\n", __FUNCTION__, temp_word);
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+ rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
if (rc) {
err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
return IRQ_NONE;
@@ -944,7 +944,7 @@
/* Clear command complete interrupt caused by this write */
temp_word = 0x1f;
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word);
+ rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
return IRQ_NONE;
@@ -975,14 +975,14 @@
/* Clear all events after serving them */
temp_word = 0x1F;
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word);
+ rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
return IRQ_NONE;
}
/* Unmask Hot-plug Interrupt Enable */
if (!pciehp_poll_mode) {
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, temp_word);
+ rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
return IRQ_NONE;
@@ -992,14 +992,14 @@
dbg("%s: hp_register_read_word SLOT_CTRL with value %x\n", __FUNCTION__, temp_word);
temp_word = (temp_word & ~HP_INTR_ENABLE) | HP_INTR_ENABLE;
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL, temp_word);
+ rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
return IRQ_NONE;
}
dbg("%s: hp_register_write_word SLOT_CTRL with value %x\n", __FUNCTION__, temp_word);
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+ rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
if (rc) {
err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
return IRQ_NONE;
@@ -1008,7 +1008,7 @@
/* Clear command complete interrupt caused by this write */
temp_word = 0x1F;
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word);
+ rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
return IRQ_NONE;
@@ -1038,7 +1038,7 @@
return -1;
}
- retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP, lnk_cap);
+ retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP(slot->ctrl->cap_base), lnk_cap);
if (retval) {
err("%s : hp_register_read_dword LNK_CAP failed\n", __FUNCTION__);
@@ -1079,7 +1079,7 @@
return -1;
}
- retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP, lnk_cap);
+ retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP(slot->ctrl->cap_base), lnk_cap);
if (retval) {
err("%s : hp_register_read_dword LNK_CAP failed\n", __FUNCTION__);
@@ -1141,7 +1141,7 @@
return -1;
}
- retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS, lnk_status);
+ retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS(slot->ctrl->cap_base), lnk_status);
if (retval) {
err("%s : hp_register_read_word LNK_STATUS failed\n", __FUNCTION__);
@@ -1182,7 +1182,7 @@
return -1;
}
- retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS, lnk_status);
+ retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS(slot->ctrl->cap_base), lnk_status);
if (retval) {
err("%s : hp_register_read_word LNK_STATUS failed\n", __FUNCTION__);
@@ -1292,47 +1292,48 @@
goto abort_free_ctlr;
}
- pcie_cap_base = cap_base;
+ ctrl->cap_base = cap_base;
dbg("%s: pcie_cap_base %x\n", __FUNCTION__, pcie_cap_base);
- rc = hp_register_read_word(pdev, CAP_REG, cap_reg);
+ rc = hp_register_read_word(pdev, CAP_REG(ctrl->cap_base), cap_reg);
if (rc) {
err("%s : hp_register_read_word CAP_REG failed\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: CAP_REG offset %x cap_reg %x\n", __FUNCTION__, CAP_REG, cap_reg);
+ dbg("%s: CAP_REG offset %x cap_reg %x\n", __FUNCTION__, CAP_REG(ctrl->cap_base), cap_reg);
- if (((cap_reg & SLOT_IMPL) == 0) || ((cap_reg & DEV_PORT_TYPE) != 0x0040)){
+ if (((cap_reg & SLOT_IMPL) == 0) || (((cap_reg & DEV_PORT_TYPE) != 0x0040)
+ && ((cap_reg & DEV_PORT_TYPE) != 0x0060))) {
dbg("%s : This is not a root port or the port is not connected to a slot\n", __FUNCTION__);
goto abort_free_ctlr;
}
- rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP, slot_cap);
+ rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP(ctrl->cap_base), slot_cap);
if (rc) {
err("%s : hp_register_read_word CAP_REG failed\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: SLOT_CAP offset %x slot_cap %x\n", __FUNCTION__, SLOT_CAP, slot_cap);
+ dbg("%s: SLOT_CAP offset %x slot_cap %x\n", __FUNCTION__, SLOT_CAP(ctrl->cap_base), slot_cap);
if (!(slot_cap & HP_CAP)) {
dbg("%s : This slot is not hot-plug capable\n", __FUNCTION__);
goto abort_free_ctlr;
}
/* For debugging purpose */
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+ rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
if (rc) {
err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: SLOT_STATUS offset %x slot_status %x\n", __FUNCTION__, SLOT_STATUS, slot_status);
+ dbg("%s: SLOT_STATUS offset %x slot_status %x\n", __FUNCTION__, SLOT_STATUS(ctrl->cap_base), slot_status);
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+ rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), slot_ctrl);
if (rc) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: SLOT_CTRL offset %x slot_ctrl %x\n", __FUNCTION__, SLOT_CTRL, slot_ctrl);
+ dbg("%s: SLOT_CTRL offset %x slot_ctrl %x\n", __FUNCTION__, SLOT_CTRL(ctrl->cap_base), slot_ctrl);
if (first) {
spin_lock_init(&hpc_event_lock);
@@ -1372,36 +1373,37 @@
php_ctlr->num_slots = 1;
/* Mask Hot-plug Interrupt Enable */
- rc = hp_register_read_word(pdev, SLOT_CTRL, temp_word);
+ rc = hp_register_read_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL, temp_word);
+ dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL(ctrl->cap_base), temp_word);
temp_word = (temp_word & ~HP_INTR_ENABLE & ~CMD_CMPL_INTR_ENABLE) | 0x00;
- rc = hp_register_write_word(pdev, SLOT_CTRL, temp_word);
+ rc = hp_register_write_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
goto abort_free_ctlr;
}
dbg("%s : Mask HPIE hp_register_write_word SLOT_CTRL %x\n", __FUNCTION__, temp_word);
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+ rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
if (rc) {
err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: Mask HPIE SLOT_STATUS offset %x reads slot_status %x\n", __FUNCTION__, SLOT_STATUS, slot_status);
+ dbg("%s: Mask HPIE SLOT_STATUS offset %x reads slot_status %x\n", __FUNCTION__, SLOT_STATUS(ctrl->cap_base)
+ , slot_status);
temp_word = 0x1F; /* Clear all events */
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word);
+ rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: SLOT_STATUS offset %x writes slot_status %x\n", __FUNCTION__, SLOT_STATUS, temp_word);
+ dbg("%s: SLOT_STATUS offset %x writes slot_status %x\n", __FUNCTION__, SLOT_STATUS(ctrl->cap_base), temp_word);
if (pciehp_poll_mode) {/* Install interrupt polling code */
/* Install and start the interrupt polling timer */
@@ -1417,12 +1419,12 @@
}
}
- rc = hp_register_read_word(pdev, SLOT_CTRL, temp_word);
+ rc = hp_register_read_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL, temp_word);
+ dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL(ctrl->cap_base), temp_word);
dbg("%s: slot_cap %x\n", __FUNCTION__, slot_cap);
intr_enable = intr_enable | PRSN_DETECT_ENABLE;
@@ -1446,27 +1448,27 @@
dbg("%s: temp_word %x\n", __FUNCTION__, temp_word);
/* Unmask Hot-plug Interrupt Enable for the interrupt notification mechanism case */
- rc = hp_register_write_word(pdev, SLOT_CTRL, temp_word);
+ rc = hp_register_write_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
goto abort_free_ctlr;
}
dbg("%s : Unmask HPIE hp_register_write_word SLOT_CTRL with %x\n", __FUNCTION__, temp_word);
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+ rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
if (rc) {
err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
goto abort_free_ctlr;
}
dbg("%s: Unmask HPIE SLOT_STATUS offset %x reads slot_status %x\n", __FUNCTION__,
- SLOT_STATUS, slot_status);
+ SLOT_STATUS(ctrl->cap_base), slot_status);
temp_word = 0x1F; /* Clear all events */
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word);
+ rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: SLOT_STATUS offset %x writes slot_status %x\n", __FUNCTION__, SLOT_STATUS, temp_word);
+ dbg("%s: SLOT_STATUS offset %x writes slot_status %x\n", __FUNCTION__, SLOT_STATUS(ctrl->cap_base), temp_word);
/* Add this HPC instance into the HPC list */
spin_lock(&list_lock);
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index f0c53f8..a70a5c5 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -95,7 +95,7 @@
*/
static void release_slot(struct hotplug_slot *hotplug_slot)
{
- struct slot *slot = (struct slot *)hotplug_slot->private;
+ struct slot *slot = hotplug_slot->private;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index 9f90eb8..490a955 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -1885,7 +1885,7 @@
func = shpchp_slot_find(p_slot->bus, p_slot->device, 0);
if (!func) {
dbg("%s: Error! slot NULL\n", __FUNCTION__);
- return 1;
+ return -ENODEV;
}
/* Check to see if (latch closed, card present, power off) */
@@ -1894,19 +1894,19 @@
if (rc || !getstatus) {
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
- return 1;
+ return -ENODEV;
}
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
- return 1;
+ return -ENODEV;
}
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
- return 1;
+ return -ENODEV;
}
up(&p_slot->ctrl->crit_sect);
@@ -1914,7 +1914,7 @@
func = shpchp_slot_create(p_slot->bus);
if (func == NULL)
- return 1;
+ return -ENOMEM;
func->bus = p_slot->bus;
func->device = p_slot->device;
@@ -1939,7 +1939,7 @@
/* Setup slot structure with entry for empty slot */
func = shpchp_slot_create(p_slot->bus);
if (func == NULL)
- return (1); /* Out of memory */
+ return -ENOMEM; /* Out of memory */
func->bus = p_slot->bus;
func->device = p_slot->device;
@@ -1972,7 +1972,7 @@
struct pci_func *func;
if (!p_slot->ctrl)
- return 1;
+ return -ENODEV;
pci_bus = p_slot->ctrl->pci_dev->subordinate;
@@ -1983,19 +1983,19 @@
if (ret || !getstatus) {
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
- return 1;
+ return -ENODEV;
}
ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (ret || getstatus) {
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
- return 1;
+ return -ENODEV;
}
ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (ret || !getstatus) {
info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
- return 1;
+ return -ENODEV;
}
up(&p_slot->ctrl->crit_sect);
@@ -2011,7 +2011,7 @@
/* Check the Class Code */
rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
if (rc)
- return rc;
+ return -ENODEV;
if (class_code == PCI_BASE_CLASS_DISPLAY) {
/* Display/Video adapter (not supported) */
@@ -2020,13 +2020,13 @@
/* See if it's a bridge */
rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
if (rc)
- return rc;
+ return -ENODEV;
/* If it's a bridge, check the VGA Enable bit */
if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR);
if (rc)
- return rc;
+ return -ENODEV;
/* If the VGA Enable bit is set, remove isn't supported */
if (BCR & PCI_BRIDGE_CTL_VGA) {
@@ -2042,12 +2042,12 @@
if ((func != NULL) && !rc) {
rc = remove_board(func, p_slot->ctrl);
} else if (!rc)
- rc = 1;
+ rc = -ENODEV;
if (p_slot)
update_slot_info(p_slot);
- return(rc);
+ return rc;
}
diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c
index 243a51d..7957cdc 100644
--- a/drivers/pci/hotplug/shpchprm_acpi.c
+++ b/drivers/pci/hotplug/shpchprm_acpi.c
@@ -1626,7 +1626,7 @@
pci_bus->number = func->bus;
devfn = PCI_DEVFN(func->device, func->function);
- ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->bus);
+ ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus);
if (ab) {
if (ab->_hpp) {
@@ -1681,7 +1681,7 @@
| PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
bcmd = bcommand = bcommand | PCI_BRIDGE_CTL_NO_ISA;
- ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->bus);
+ ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus);
if (ab) {
if (ab->_hpp) {
if (ab->_hpp->enable_perr) {
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 8568b20..6ca0061 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -73,6 +73,17 @@
return (str - buf);
}
+static ssize_t modalias_show(struct device *dev, char *buf)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+
+ return sprintf(buf, "pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x\n",
+ pci_dev->vendor, pci_dev->device,
+ pci_dev->subsystem_vendor, pci_dev->subsystem_device,
+ (u8)(pci_dev->class >> 16), (u8)(pci_dev->class >> 8),
+ (u8)(pci_dev->class));
+}
+
struct device_attribute pci_dev_attrs[] = {
__ATTR_RO(resource),
__ATTR_RO(vendor),
@@ -82,6 +93,7 @@
__ATTR_RO(class),
__ATTR_RO(irq),
__ATTR_RO(local_cpus),
+ __ATTR_RO(modalias),
__ATTR_NULL,
};
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 79cdc16..744da0d 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -32,33 +32,6 @@
extern unsigned char pci_bus_max_busnr(struct pci_bus *bus);
extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
-struct pci_dev_wrapped {
- struct pci_dev *dev;
- void *data;
-};
-
-struct pci_bus_wrapped {
- struct pci_bus *bus;
- void *data;
-};
-
-struct pci_visit {
- int (* pre_visit_pci_bus) (struct pci_bus_wrapped *,
- struct pci_dev_wrapped *);
- int (* post_visit_pci_bus) (struct pci_bus_wrapped *,
- struct pci_dev_wrapped *);
-
- int (* pre_visit_pci_dev) (struct pci_dev_wrapped *,
- struct pci_bus_wrapped *);
- int (* visit_pci_dev) (struct pci_dev_wrapped *,
- struct pci_bus_wrapped *);
- int (* post_visit_pci_dev) (struct pci_dev_wrapped *,
- struct pci_bus_wrapped *);
-};
-
-extern int pci_visit_dev(struct pci_visit *fn,
- struct pci_dev_wrapped *wrapped_dev,
- struct pci_bus_wrapped *wrapped_parent);
extern void pci_remove_legacy_files(struct pci_bus *bus);
/* Lock for read/write access to pci device and bus lists */
diff --git a/drivers/pci/pcie/portdrv_bus.c b/drivers/pci/pcie/portdrv_bus.c
index 4037a3e..3e84b50 100644
--- a/drivers/pci/pcie/portdrv_bus.c
+++ b/drivers/pci/pcie/portdrv_bus.c
@@ -39,7 +39,8 @@
driver->id_table->vendor != pciedev->id.vendor) ||
(driver->id_table->device != PCI_ANY_ID &&
driver->id_table->device != pciedev->id.device) ||
- driver->id_table->port_type != pciedev->id.port_type ||
+ (driver->id_table->port_type != PCIE_ANY_PORT &&
+ driver->id_table->port_type != pciedev->id.port_type) ||
driver->id_table->service_type != pciedev->id.service_type )
return 0;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 026aa04..637e949 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -18,6 +18,7 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/acpi.h>
#include "pci.h"
/* Deal with broken BIOS'es that neglect to enable passive release,
@@ -467,9 +468,6 @@
* non-x86 architectures (yes Via exists on PPC among other places),
* we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
* interrupts delivered properly.
- *
- * TODO: When we have device-specific interrupt routers,
- * quirk_via_irqpic will go away from quirks.
*/
/*
@@ -494,6 +492,29 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi );
+static void quirk_via_irqpic(struct pci_dev *dev)
+{
+ u8 irq, new_irq;
+
+#ifdef CONFIG_X86_IO_APIC
+ if (nr_ioapics && !skip_ioapic_setup)
+ return;
+#endif
+#ifdef CONFIG_ACPI
+ if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
+ return;
+#endif
+ new_irq = dev->irq & 0xf;
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
+ if (new_irq != irq) {
+ printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
+ pci_name(dev), irq, new_irq);
+ udelay(15); /* unknown if delay really needed */
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
+ }
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);
+
/*
* PIIX3 USB: We have to disable USB interrupts that are
* hardwired to PIRQD# and may be shared with an
@@ -683,19 +704,6 @@
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb );
-/*
- * VIA northbridges care about PCI_INTERRUPT_LINE
- */
-int via_interrupt_line_quirk;
-
-static void __devinit quirk_via_bridge(struct pci_dev *pdev)
-{
- if(pdev->devfn == 0) {
- printk(KERN_INFO "PCI: Via IRQ fixup\n");
- via_interrupt_line_quirk = 1;
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_bridge );
/*
* Serverworks CSB5 IDE does not fully support native mode
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 66150d0..c4ade28 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -1592,9 +1592,9 @@
/* Set up character device for user mode clients */
i = register_chrdev(0, "pcmcia", &ds_fops);
- if (i == -EBUSY)
+ if (i < 0)
printk(KERN_NOTICE "unable to find a free device # for "
- "Driver Services\n");
+ "Driver Services (error=%d)\n", i);
else
major_dev = i;
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 02cfe24..ceeb3cf 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -7,7 +7,7 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999-2001
*
- * $Revision: 1.161 $
+ * $Revision: 1.164 $
*/
#include <linux/config.h>
@@ -1766,10 +1766,10 @@
printk(KERN_WARNING
"dasd_generic_probe: could not add sysfs entries "
"for %s\n", cdev->dev.bus_id);
+ } else {
+ cdev->handler = &dasd_int_handler;
}
- cdev->handler = &dasd_int_handler;
-
return ret;
}
@@ -1780,6 +1780,8 @@
{
struct dasd_device *device;
+ cdev->handler = NULL;
+
dasd_remove_sysfs_files(cdev);
device = dasd_device_from_cdev(cdev);
if (IS_ERR(device))
@@ -1810,14 +1812,14 @@
struct dasd_device *device;
int feature_diag, rc;
- feature_diag = dasd_get_feature(cdev, DASD_FEATURE_USEDIAG);
- if (feature_diag < 0)
- return feature_diag;
-
device = dasd_create_device(cdev);
if (IS_ERR(device))
return PTR_ERR(device);
+ feature_diag = dasd_get_feature(cdev, DASD_FEATURE_USEDIAG);
+ if (feature_diag < 0)
+ return feature_diag;
+
if (feature_diag) {
if (!dasd_diag_discipline_pointer) {
printk (KERN_WARNING
diff --git a/drivers/s390/net/Makefile b/drivers/s390/net/Makefile
index 7cabb80..90d4d0e 100644
--- a/drivers/s390/net/Makefile
+++ b/drivers/s390/net/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_SMSGIUCV) += smsgiucv.o
obj-$(CONFIG_CTC) += ctc.o fsm.o cu3088.o
obj-$(CONFIG_LCS) += lcs.o cu3088.o
-qeth-y := qeth_main.o qeth_mpc.o qeth_sys.o qeth_eddp.o qeth_tso.o
+obj-$(CONFIG_CLAW) += claw.o cu3088.o
+qeth-y := qeth_main.o qeth_mpc.o qeth_sys.o qeth_eddp.o
qeth-$(CONFIG_PROC_FS) += qeth_proc.o
obj-$(CONFIG_QETH) += qeth.o
diff --git a/drivers/s390/net/ctcdbug.h b/drivers/s390/net/ctcdbug.h
index ef88839..7fe2ebd 100644
--- a/drivers/s390/net/ctcdbug.h
+++ b/drivers/s390/net/ctcdbug.h
@@ -1,6 +1,6 @@
/*
*
- * linux/drivers/s390/net/ctcdbug.h ($Revision: 1.4 $)
+ * linux/drivers/s390/net/ctcdbug.h ($Revision: 1.5 $)
*
* CTC / ESCON network driver - s390 dbf exploit.
*
@@ -9,7 +9,7 @@
* Author(s): Original Code written by
* Peter Tiedemann (ptiedem@de.ibm.com)
*
- * $Revision: 1.4 $ $Date: 2004/10/15 09:26:58 $
+ * $Revision: 1.5 $ $Date: 2005/02/27 19:46:44 $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,9 +25,11 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
+#ifndef _CTCDBUG_H_
+#define _CTCDBUG_H_
#include <asm/debug.h>
+#include "ctcmain.h"
/**
* Debug Facility stuff
*/
@@ -41,7 +43,7 @@
#define CTC_DBF_DATA_LEN 128
#define CTC_DBF_DATA_INDEX 3
#define CTC_DBF_DATA_NR_AREAS 1
-#define CTC_DBF_DATA_LEVEL 2
+#define CTC_DBF_DATA_LEVEL 3
#define CTC_DBF_TRACE_NAME "ctc_trace"
#define CTC_DBF_TRACE_LEN 16
@@ -121,3 +123,5 @@
printk("\n");
}
+
+#endif
diff --git a/drivers/s390/net/ctcmain.c b/drivers/s390/net/ctcmain.c
index 7266bf5..ff3e95e 100644
--- a/drivers/s390/net/ctcmain.c
+++ b/drivers/s390/net/ctcmain.c
@@ -1,5 +1,5 @@
/*
- * $Id: ctcmain.c,v 1.72 2005/03/17 10:51:52 ptiedem Exp $
+ * $Id: ctcmain.c,v 1.74 2005/03/24 09:04:17 mschwide Exp $
*
* CTC / ESCON network driver
*
@@ -37,12 +37,11 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * RELEASE-TAG: CTC/ESCON network driver $Revision: 1.72 $
+ * RELEASE-TAG: CTC/ESCON network driver $Revision: 1.74 $
*
*/
#undef DEBUG
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -74,288 +73,13 @@
#include "ctctty.h"
#include "fsm.h"
#include "cu3088.h"
+
#include "ctcdbug.h"
+#include "ctcmain.h"
MODULE_AUTHOR("(C) 2000 IBM Corp. by Fritz Elfert (felfert@millenux.com)");
MODULE_DESCRIPTION("Linux for S/390 CTC/Escon Driver");
MODULE_LICENSE("GPL");
-
-/**
- * CCW commands, used in this driver.
- */
-#define CCW_CMD_WRITE 0x01
-#define CCW_CMD_READ 0x02
-#define CCW_CMD_SET_EXTENDED 0xc3
-#define CCW_CMD_PREPARE 0xe3
-
-#define CTC_PROTO_S390 0
-#define CTC_PROTO_LINUX 1
-#define CTC_PROTO_LINUX_TTY 2
-#define CTC_PROTO_OS390 3
-#define CTC_PROTO_MAX 3
-
-#define CTC_BUFSIZE_LIMIT 65535
-#define CTC_BUFSIZE_DEFAULT 32768
-
-#define CTC_TIMEOUT_5SEC 5000
-
-#define CTC_INITIAL_BLOCKLEN 2
-
-#define READ 0
-#define WRITE 1
-
-#define CTC_ID_SIZE BUS_ID_SIZE+3
-
-
-struct ctc_profile {
- unsigned long maxmulti;
- unsigned long maxcqueue;
- unsigned long doios_single;
- unsigned long doios_multi;
- unsigned long txlen;
- unsigned long tx_time;
- struct timespec send_stamp;
-};
-
-/**
- * Definition of one channel
- */
-struct channel {
-
- /**
- * Pointer to next channel in list.
- */
- struct channel *next;
- char id[CTC_ID_SIZE];
- struct ccw_device *cdev;
-
- /**
- * Type of this channel.
- * CTC/A or Escon for valid channels.
- */
- enum channel_types type;
-
- /**
- * Misc. flags. See CHANNEL_FLAGS_... below
- */
- __u32 flags;
-
- /**
- * The protocol of this channel
- */
- __u16 protocol;
-
- /**
- * I/O and irq related stuff
- */
- struct ccw1 *ccw;
- struct irb *irb;
-
- /**
- * RX/TX buffer size
- */
- int max_bufsize;
-
- /**
- * Transmit/Receive buffer.
- */
- struct sk_buff *trans_skb;
-
- /**
- * Universal I/O queue.
- */
- struct sk_buff_head io_queue;
-
- /**
- * TX queue for collecting skb's during busy.
- */
- struct sk_buff_head collect_queue;
-
- /**
- * Amount of data in collect_queue.
- */
- int collect_len;
-
- /**
- * spinlock for collect_queue and collect_len
- */
- spinlock_t collect_lock;
-
- /**
- * Timer for detecting unresposive
- * I/O operations.
- */
- fsm_timer timer;
-
- /**
- * Retry counter for misc. operations.
- */
- int retry;
-
- /**
- * The finite state machine of this channel
- */
- fsm_instance *fsm;
-
- /**
- * The corresponding net_device this channel
- * belongs to.
- */
- struct net_device *netdev;
-
- struct ctc_profile prof;
-
- unsigned char *trans_skb_data;
-
- __u16 logflags;
-};
-
-#define CHANNEL_FLAGS_READ 0
-#define CHANNEL_FLAGS_WRITE 1
-#define CHANNEL_FLAGS_INUSE 2
-#define CHANNEL_FLAGS_BUFSIZE_CHANGED 4
-#define CHANNEL_FLAGS_FAILED 8
-#define CHANNEL_FLAGS_WAITIRQ 16
-#define CHANNEL_FLAGS_RWMASK 1
-#define CHANNEL_DIRECTION(f) (f & CHANNEL_FLAGS_RWMASK)
-
-#define LOG_FLAG_ILLEGALPKT 1
-#define LOG_FLAG_ILLEGALSIZE 2
-#define LOG_FLAG_OVERRUN 4
-#define LOG_FLAG_NOMEM 8
-
-#define CTC_LOGLEVEL_INFO 1
-#define CTC_LOGLEVEL_NOTICE 2
-#define CTC_LOGLEVEL_WARN 4
-#define CTC_LOGLEVEL_EMERG 8
-#define CTC_LOGLEVEL_ERR 16
-#define CTC_LOGLEVEL_DEBUG 32
-#define CTC_LOGLEVEL_CRIT 64
-
-#define CTC_LOGLEVEL_DEFAULT \
-(CTC_LOGLEVEL_INFO | CTC_LOGLEVEL_NOTICE | CTC_LOGLEVEL_WARN | CTC_LOGLEVEL_CRIT)
-
-#define CTC_LOGLEVEL_MAX ((CTC_LOGLEVEL_CRIT<<1)-1)
-
-static int loglevel = CTC_LOGLEVEL_DEFAULT;
-
-#define ctc_pr_debug(fmt, arg...) \
-do { if (loglevel & CTC_LOGLEVEL_DEBUG) printk(KERN_DEBUG fmt,##arg); } while (0)
-
-#define ctc_pr_info(fmt, arg...) \
-do { if (loglevel & CTC_LOGLEVEL_INFO) printk(KERN_INFO fmt,##arg); } while (0)
-
-#define ctc_pr_notice(fmt, arg...) \
-do { if (loglevel & CTC_LOGLEVEL_NOTICE) printk(KERN_NOTICE fmt,##arg); } while (0)
-
-#define ctc_pr_warn(fmt, arg...) \
-do { if (loglevel & CTC_LOGLEVEL_WARN) printk(KERN_WARNING fmt,##arg); } while (0)
-
-#define ctc_pr_emerg(fmt, arg...) \
-do { if (loglevel & CTC_LOGLEVEL_EMERG) printk(KERN_EMERG fmt,##arg); } while (0)
-
-#define ctc_pr_err(fmt, arg...) \
-do { if (loglevel & CTC_LOGLEVEL_ERR) printk(KERN_ERR fmt,##arg); } while (0)
-
-#define ctc_pr_crit(fmt, arg...) \
-do { if (loglevel & CTC_LOGLEVEL_CRIT) printk(KERN_CRIT fmt,##arg); } while (0)
-
-/**
- * Linked list of all detected channels.
- */
-static struct channel *channels = NULL;
-
-struct ctc_priv {
- struct net_device_stats stats;
- unsigned long tbusy;
- /**
- * The finite state machine of this interface.
- */
- fsm_instance *fsm;
- /**
- * The protocol of this device
- */
- __u16 protocol;
- /**
- * Timer for restarting after I/O Errors
- */
- fsm_timer restart_timer;
-
- int buffer_size;
-
- struct channel *channel[2];
-};
-
-/**
- * Definition of our link level header.
- */
-struct ll_header {
- __u16 length;
- __u16 type;
- __u16 unused;
-};
-#define LL_HEADER_LENGTH (sizeof(struct ll_header))
-
-/**
- * Compatibility macros for busy handling
- * of network devices.
- */
-static __inline__ void
-ctc_clear_busy(struct net_device * dev)
-{
- clear_bit(0, &(((struct ctc_priv *) dev->priv)->tbusy));
- if (((struct ctc_priv *)dev->priv)->protocol != CTC_PROTO_LINUX_TTY)
- netif_wake_queue(dev);
-}
-
-static __inline__ int
-ctc_test_and_set_busy(struct net_device * dev)
-{
- if (((struct ctc_priv *)dev->priv)->protocol != CTC_PROTO_LINUX_TTY)
- netif_stop_queue(dev);
- return test_and_set_bit(0, &((struct ctc_priv *) dev->priv)->tbusy);
-}
-
-/**
- * Print Banner.
- */
-static void
-print_banner(void)
-{
- static int printed = 0;
- char vbuf[] = "$Revision: 1.72 $";
- char *version = vbuf;
-
- if (printed)
- return;
- if ((version = strchr(version, ':'))) {
- char *p = strchr(version + 1, '$');
- if (p)
- *p = '\0';
- } else
- version = " ??? ";
- printk(KERN_INFO "CTC driver Version%s"
-#ifdef DEBUG
- " (DEBUG-VERSION, " __DATE__ __TIME__ ")"
-#endif
- " initialized\n", version);
- printed = 1;
-}
-
-/**
- * Return type of a detected device.
- */
-static enum channel_types
-get_channel_type(struct ccw_device_id *id)
-{
- enum channel_types type = (enum channel_types) id->driver_info;
-
- if (type == channel_type_ficon)
- type = channel_type_escon;
-
- return type;
-}
-
/**
* States of the interface statemachine.
*/
@@ -371,7 +95,7 @@
/**
* MUST be always the last element!!
*/
- NR_DEV_STATES
+ CTC_NR_DEV_STATES
};
static const char *dev_state_names[] = {
@@ -399,7 +123,7 @@
/**
* MUST be always the last element!!
*/
- NR_DEV_EVENTS
+ CTC_NR_DEV_EVENTS
};
static const char *dev_event_names[] = {
@@ -476,40 +200,6 @@
NR_CH_EVENTS,
};
-static const char *ch_event_names[] = {
- "ccw_device success",
- "ccw_device busy",
- "ccw_device enodev",
- "ccw_device ioerr",
- "ccw_device unknown",
-
- "Status ATTN & BUSY",
- "Status ATTN",
- "Status BUSY",
-
- "Unit check remote reset",
- "Unit check remote system reset",
- "Unit check TX timeout",
- "Unit check TX parity",
- "Unit check Hardware failure",
- "Unit check RX parity",
- "Unit check ZERO",
- "Unit check Unknown",
-
- "SubChannel check Unknown",
-
- "Machine check failure",
- "Machine check operational",
-
- "IRQ normal",
- "IRQ final",
-
- "Timer",
-
- "Start",
- "Stop",
-};
-
/**
* States of the channel statemachine.
*/
@@ -545,6 +235,87 @@
NR_CH_STATES,
};
+static int loglevel = CTC_LOGLEVEL_DEFAULT;
+
+/**
+ * Linked list of all detected channels.
+ */
+static struct channel *channels = NULL;
+
+/**
+ * Print Banner.
+ */
+static void
+print_banner(void)
+{
+ static int printed = 0;
+ char vbuf[] = "$Revision: 1.74 $";
+ char *version = vbuf;
+
+ if (printed)
+ return;
+ if ((version = strchr(version, ':'))) {
+ char *p = strchr(version + 1, '$');
+ if (p)
+ *p = '\0';
+ } else
+ version = " ??? ";
+ printk(KERN_INFO "CTC driver Version%s"
+#ifdef DEBUG
+ " (DEBUG-VERSION, " __DATE__ __TIME__ ")"
+#endif
+ " initialized\n", version);
+ printed = 1;
+}
+
+/**
+ * Return type of a detected device.
+ */
+static enum channel_types
+get_channel_type(struct ccw_device_id *id)
+{
+ enum channel_types type = (enum channel_types) id->driver_info;
+
+ if (type == channel_type_ficon)
+ type = channel_type_escon;
+
+ return type;
+}
+
+static const char *ch_event_names[] = {
+ "ccw_device success",
+ "ccw_device busy",
+ "ccw_device enodev",
+ "ccw_device ioerr",
+ "ccw_device unknown",
+
+ "Status ATTN & BUSY",
+ "Status ATTN",
+ "Status BUSY",
+
+ "Unit check remote reset",
+ "Unit check remote system reset",
+ "Unit check TX timeout",
+ "Unit check TX parity",
+ "Unit check Hardware failure",
+ "Unit check RX parity",
+ "Unit check ZERO",
+ "Unit check Unknown",
+
+ "SubChannel check Unknown",
+
+ "Machine check failure",
+ "Machine check operational",
+
+ "IRQ normal",
+ "IRQ final",
+
+ "Timer",
+
+ "Start",
+ "Stop",
+};
+
static const char *ch_state_names[] = {
"Idle",
"Stopped",
@@ -1934,7 +1705,6 @@
ch->cdev = cdev;
snprintf(ch->id, CTC_ID_SIZE, "ch-%s", cdev->dev.bus_id);
ch->type = type;
- loglevel = CTC_LOGLEVEL_DEFAULT;
ch->fsm = init_fsm(ch->id, ch_state_names,
ch_event_names, NR_CH_STATES, NR_CH_EVENTS,
ch_fsm, CH_FSM_LEN, GFP_KERNEL);
@@ -2697,6 +2467,7 @@
/*
* sysfs attributes
*/
+
static ssize_t
buffer_show(struct device *dev, char *buf)
{
@@ -2715,57 +2486,61 @@
struct ctc_priv *priv;
struct net_device *ndev;
int bs1;
+ char buffer[16];
DBF_TEXT(trace, 3, __FUNCTION__);
+ DBF_TEXT(trace, 3, buf);
priv = dev->driver_data;
- if (!priv)
+ if (!priv) {
+ DBF_TEXT(trace, 3, "bfnopriv");
return -ENODEV;
- ndev = priv->channel[READ]->netdev;
- if (!ndev)
- return -ENODEV;
- sscanf(buf, "%u", &bs1);
+ }
+ sscanf(buf, "%u", &bs1);
if (bs1 > CTC_BUFSIZE_LIMIT)
- return -EINVAL;
+ goto einval;
+ if (bs1 < (576 + LL_HEADER_LENGTH + 2))
+ goto einval;
+ priv->buffer_size = bs1; // just to overwrite the default
+
+ ndev = priv->channel[READ]->netdev;
+ if (!ndev) {
+ DBF_TEXT(trace, 3, "bfnondev");
+ return -ENODEV;
+ }
+
if ((ndev->flags & IFF_RUNNING) &&
(bs1 < (ndev->mtu + LL_HEADER_LENGTH + 2)))
- return -EINVAL;
- if (bs1 < (576 + LL_HEADER_LENGTH + 2))
- return -EINVAL;
+ goto einval;
- priv->buffer_size = bs1;
- priv->channel[READ]->max_bufsize =
- priv->channel[WRITE]->max_bufsize = bs1;
+ priv->channel[READ]->max_bufsize = bs1;
+ priv->channel[WRITE]->max_bufsize = bs1;
if (!(ndev->flags & IFF_RUNNING))
ndev->mtu = bs1 - LL_HEADER_LENGTH - 2;
priv->channel[READ]->flags |= CHANNEL_FLAGS_BUFSIZE_CHANGED;
priv->channel[WRITE]->flags |= CHANNEL_FLAGS_BUFSIZE_CHANGED;
+ sprintf(buffer, "%d",priv->buffer_size);
+ DBF_TEXT(trace, 3, buffer);
return count;
+einval:
+ DBF_TEXT(trace, 3, "buff_err");
+ return -EINVAL;
}
static ssize_t
loglevel_show(struct device *dev, char *buf)
{
- struct ctc_priv *priv;
-
- priv = dev->driver_data;
- if (!priv)
- return -ENODEV;
return sprintf(buf, "%d\n", loglevel);
}
static ssize_t
loglevel_write(struct device *dev, const char *buf, size_t count)
{
- struct ctc_priv *priv;
int ll1;
DBF_TEXT(trace, 5, __FUNCTION__);
- priv = dev->driver_data;
- if (!priv)
- return -ENODEV;
sscanf(buf, "%i", &ll1);
if ((ll1 > CTC_LOGLEVEL_MAX) || (ll1 < 0))
@@ -2835,27 +2610,6 @@
return count;
}
-static DEVICE_ATTR(buffer, 0644, buffer_show, buffer_write);
-static DEVICE_ATTR(loglevel, 0644, loglevel_show, loglevel_write);
-static DEVICE_ATTR(stats, 0644, stats_show, stats_write);
-
-static int
-ctc_add_attributes(struct device *dev)
-{
-// device_create_file(dev, &dev_attr_buffer);
- device_create_file(dev, &dev_attr_loglevel);
- device_create_file(dev, &dev_attr_stats);
- return 0;
-}
-
-static void
-ctc_remove_attributes(struct device *dev)
-{
- device_remove_file(dev, &dev_attr_stats);
- device_remove_file(dev, &dev_attr_loglevel);
-// device_remove_file(dev, &dev_attr_buffer);
-}
-
static void
ctc_netdev_unregister(struct net_device * dev)
@@ -2899,52 +2653,6 @@
#endif
}
-/**
- * Initialize everything of the net device except the name and the
- * channel structs.
- */
-static struct net_device *
-ctc_init_netdevice(struct net_device * dev, int alloc_device,
- struct ctc_priv *privptr)
-{
- if (!privptr)
- return NULL;
-
- DBF_TEXT(setup, 3, __FUNCTION__);
- if (alloc_device) {
- dev = kmalloc(sizeof (struct net_device), GFP_KERNEL);
- if (!dev)
- return NULL;
- memset(dev, 0, sizeof (struct net_device));
- }
-
- dev->priv = privptr;
- privptr->fsm = init_fsm("ctcdev", dev_state_names,
- dev_event_names, NR_DEV_STATES, NR_DEV_EVENTS,
- dev_fsm, DEV_FSM_LEN, GFP_KERNEL);
- if (privptr->fsm == NULL) {
- if (alloc_device)
- kfree(dev);
- return NULL;
- }
- fsm_newstate(privptr->fsm, DEV_STATE_STOPPED);
- fsm_settimer(privptr->fsm, &privptr->restart_timer);
- if (dev->mtu == 0)
- dev->mtu = CTC_BUFSIZE_DEFAULT - LL_HEADER_LENGTH - 2;
- dev->hard_start_xmit = ctc_tx;
- dev->open = ctc_open;
- dev->stop = ctc_close;
- dev->get_stats = ctc_stats;
- dev->change_mtu = ctc_change_mtu;
- dev->hard_header_len = LL_HEADER_LENGTH + 2;
- dev->addr_len = 0;
- dev->type = ARPHRD_SLIP;
- dev->tx_queue_len = 100;
- dev->flags = IFF_POINTOPOINT | IFF_NOARP;
- SET_MODULE_OWNER(dev);
- return dev;
-}
-
static ssize_t
ctc_proto_show(struct device *dev, char *buf)
{
@@ -2977,7 +2685,6 @@
return count;
}
-static DEVICE_ATTR(protocol, 0644, ctc_proto_show, ctc_proto_store);
static ssize_t
ctc_type_show(struct device *dev, char *buf)
@@ -2991,8 +2698,13 @@
return sprintf(buf, "%s\n", cu3088_type[cgdev->cdev[0]->id.driver_info]);
}
+static DEVICE_ATTR(buffer, 0644, buffer_show, buffer_write);
+static DEVICE_ATTR(protocol, 0644, ctc_proto_show, ctc_proto_store);
static DEVICE_ATTR(type, 0444, ctc_type_show, NULL);
+static DEVICE_ATTR(loglevel, 0644, loglevel_show, loglevel_write);
+static DEVICE_ATTR(stats, 0644, stats_show, stats_write);
+
static struct attribute *ctc_attr[] = {
&dev_attr_protocol.attr,
&dev_attr_type.attr,
@@ -3005,6 +2717,21 @@
};
static int
+ctc_add_attributes(struct device *dev)
+{
+ device_create_file(dev, &dev_attr_loglevel);
+ device_create_file(dev, &dev_attr_stats);
+ return 0;
+}
+
+static void
+ctc_remove_attributes(struct device *dev)
+{
+ device_remove_file(dev, &dev_attr_stats);
+ device_remove_file(dev, &dev_attr_loglevel);
+}
+
+static int
ctc_add_files(struct device *dev)
{
pr_debug("%s() called\n", __FUNCTION__);
@@ -3028,15 +2755,15 @@
*
* @returns 0 on success, !0 on failure.
*/
-
static int
ctc_probe_device(struct ccwgroup_device *cgdev)
{
struct ctc_priv *priv;
int rc;
+ char buffer[16];
pr_debug("%s() called\n", __FUNCTION__);
- DBF_TEXT(trace, 3, __FUNCTION__);
+ DBF_TEXT(setup, 3, __FUNCTION__);
if (!get_device(&cgdev->dev))
return -ENODEV;
@@ -3060,10 +2787,70 @@
cgdev->cdev[1]->handler = ctc_irq_handler;
cgdev->dev.driver_data = priv;
+ sprintf(buffer, "%p", priv);
+ DBF_TEXT(data, 3, buffer);
+
+ sprintf(buffer, "%u", (unsigned int)sizeof(struct ctc_priv));
+ DBF_TEXT(data, 3, buffer);
+
+ sprintf(buffer, "%p", &channels);
+ DBF_TEXT(data, 3, buffer);
+
+ sprintf(buffer, "%u", (unsigned int)sizeof(struct channel));
+ DBF_TEXT(data, 3, buffer);
+
return 0;
}
/**
+ * Initialize everything of the net device except the name and the
+ * channel structs.
+ */
+static struct net_device *
+ctc_init_netdevice(struct net_device * dev, int alloc_device,
+ struct ctc_priv *privptr)
+{
+ if (!privptr)
+ return NULL;
+
+ DBF_TEXT(setup, 3, __FUNCTION__);
+
+ if (alloc_device) {
+ dev = kmalloc(sizeof (struct net_device), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+ memset(dev, 0, sizeof (struct net_device));
+ }
+
+ dev->priv = privptr;
+ privptr->fsm = init_fsm("ctcdev", dev_state_names,
+ dev_event_names, CTC_NR_DEV_STATES, CTC_NR_DEV_EVENTS,
+ dev_fsm, DEV_FSM_LEN, GFP_KERNEL);
+ if (privptr->fsm == NULL) {
+ if (alloc_device)
+ kfree(dev);
+ return NULL;
+ }
+ fsm_newstate(privptr->fsm, DEV_STATE_STOPPED);
+ fsm_settimer(privptr->fsm, &privptr->restart_timer);
+ if (dev->mtu == 0)
+ dev->mtu = CTC_BUFSIZE_DEFAULT - LL_HEADER_LENGTH - 2;
+ dev->hard_start_xmit = ctc_tx;
+ dev->open = ctc_open;
+ dev->stop = ctc_close;
+ dev->get_stats = ctc_stats;
+ dev->change_mtu = ctc_change_mtu;
+ dev->hard_header_len = LL_HEADER_LENGTH + 2;
+ dev->addr_len = 0;
+ dev->type = ARPHRD_SLIP;
+ dev->tx_queue_len = 100;
+ dev->flags = IFF_POINTOPOINT | IFF_NOARP;
+ SET_MODULE_OWNER(dev);
+ return dev;
+}
+
+
+/**
*
* Setup an interface.
*
@@ -3081,6 +2868,7 @@
struct ctc_priv *privptr;
struct net_device *dev;
int ret;
+ char buffer[16];
pr_debug("%s() called\n", __FUNCTION__);
DBF_TEXT(setup, 3, __FUNCTION__);
@@ -3089,6 +2877,9 @@
if (!privptr)
return -ENODEV;
+ sprintf(buffer, "%d", privptr->buffer_size);
+ DBF_TEXT(setup, 3, buffer);
+
type = get_channel_type(&cgdev->cdev[0]->id);
snprintf(read_id, CTC_ID_SIZE, "ch-%s", cgdev->cdev[0]->dev.bus_id);
@@ -3177,9 +2968,10 @@
struct ctc_priv *priv;
struct net_device *ndev;
- DBF_TEXT(trace, 3, __FUNCTION__);
+ DBF_TEXT(setup, 3, __FUNCTION__);
pr_debug("%s() called\n", __FUNCTION__);
+
priv = cgdev->dev.driver_data;
ndev = NULL;
if (!priv)
@@ -3215,7 +3007,6 @@
channel_remove(priv->channel[READ]);
if (priv->channel[WRITE])
channel_remove(priv->channel[WRITE]);
-
priv->channel[READ] = priv->channel[WRITE] = NULL;
return 0;
@@ -3228,7 +3019,7 @@
struct ctc_priv *priv;
pr_debug("%s() called\n", __FUNCTION__);
- DBF_TEXT(trace, 3, __FUNCTION__);
+ DBF_TEXT(setup, 3, __FUNCTION__);
priv = cgdev->dev.driver_data;
if (!priv)
@@ -3265,6 +3056,7 @@
static void __exit
ctc_exit(void)
{
+ DBF_TEXT(setup, 3, __FUNCTION__);
unregister_cu3088_discipline(&ctc_group_driver);
ctc_tty_cleanup();
ctc_unregister_dbf_views();
@@ -3282,6 +3074,10 @@
{
int ret = 0;
+ loglevel = CTC_LOGLEVEL_DEFAULT;
+
+ DBF_TEXT(setup, 3, __FUNCTION__);
+
print_banner();
ret = ctc_register_dbf_views();
diff --git a/drivers/s390/net/ctcmain.h b/drivers/s390/net/ctcmain.h
new file mode 100644
index 0000000..ba3605f
--- /dev/null
+++ b/drivers/s390/net/ctcmain.h
@@ -0,0 +1,276 @@
+/*
+ * $Id: ctcmain.h,v 1.4 2005/03/24 09:04:17 mschwide Exp $
+ *
+ * CTC / ESCON network driver
+ *
+ * Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Author(s): Fritz Elfert (elfert@de.ibm.com, felfert@millenux.com)
+ Peter Tiedemann (ptiedem@de.ibm.com)
+ *
+ *
+ * Documentation used:
+ * - Principles of Operation (IBM doc#: SA22-7201-06)
+ * - Common IO/-Device Commands and Self Description (IBM doc#: SA22-7204-02)
+ * - Common IO/-Device Commands and Self Description (IBM doc#: SN22-5535)
+ * - ESCON Channel-to-Channel Adapter (IBM doc#: SA22-7203-00)
+ * - ESCON I/O Interface (IBM doc#: SA22-7202-029
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * RELEASE-TAG: CTC/ESCON network driver $Revision: 1.4 $
+ *
+ */
+
+#ifndef _CTCMAIN_H_
+#define _CTCMAIN_H_
+
+#include <asm/ccwdev.h>
+#include <asm/ccwgroup.h>
+
+#include "ctctty.h"
+#include "fsm.h"
+#include "cu3088.h"
+
+
+/**
+ * CCW commands, used in this driver.
+ */
+#define CCW_CMD_WRITE 0x01
+#define CCW_CMD_READ 0x02
+#define CCW_CMD_SET_EXTENDED 0xc3
+#define CCW_CMD_PREPARE 0xe3
+
+#define CTC_PROTO_S390 0
+#define CTC_PROTO_LINUX 1
+#define CTC_PROTO_LINUX_TTY 2
+#define CTC_PROTO_OS390 3
+#define CTC_PROTO_MAX 3
+
+#define CTC_BUFSIZE_LIMIT 65535
+#define CTC_BUFSIZE_DEFAULT 32768
+
+#define CTC_TIMEOUT_5SEC 5000
+
+#define CTC_INITIAL_BLOCKLEN 2
+
+#define READ 0
+#define WRITE 1
+
+#define CTC_ID_SIZE BUS_ID_SIZE+3
+
+
+struct ctc_profile {
+ unsigned long maxmulti;
+ unsigned long maxcqueue;
+ unsigned long doios_single;
+ unsigned long doios_multi;
+ unsigned long txlen;
+ unsigned long tx_time;
+ struct timespec send_stamp;
+};
+
+/**
+ * Definition of one channel
+ */
+struct channel {
+
+ /**
+ * Pointer to next channel in list.
+ */
+ struct channel *next;
+ char id[CTC_ID_SIZE];
+ struct ccw_device *cdev;
+
+ /**
+ * Type of this channel.
+ * CTC/A or Escon for valid channels.
+ */
+ enum channel_types type;
+
+ /**
+ * Misc. flags. See CHANNEL_FLAGS_... below
+ */
+ __u32 flags;
+
+ /**
+ * The protocol of this channel
+ */
+ __u16 protocol;
+
+ /**
+ * I/O and irq related stuff
+ */
+ struct ccw1 *ccw;
+ struct irb *irb;
+
+ /**
+ * RX/TX buffer size
+ */
+ int max_bufsize;
+
+ /**
+ * Transmit/Receive buffer.
+ */
+ struct sk_buff *trans_skb;
+
+ /**
+ * Universal I/O queue.
+ */
+ struct sk_buff_head io_queue;
+
+ /**
+ * TX queue for collecting skb's during busy.
+ */
+ struct sk_buff_head collect_queue;
+
+ /**
+ * Amount of data in collect_queue.
+ */
+ int collect_len;
+
+ /**
+ * spinlock for collect_queue and collect_len
+ */
+ spinlock_t collect_lock;
+
+ /**
+ * Timer for detecting unresposive
+ * I/O operations.
+ */
+ fsm_timer timer;
+
+ /**
+ * Retry counter for misc. operations.
+ */
+ int retry;
+
+ /**
+ * The finite state machine of this channel
+ */
+ fsm_instance *fsm;
+
+ /**
+ * The corresponding net_device this channel
+ * belongs to.
+ */
+ struct net_device *netdev;
+
+ struct ctc_profile prof;
+
+ unsigned char *trans_skb_data;
+
+ __u16 logflags;
+};
+
+#define CHANNEL_FLAGS_READ 0
+#define CHANNEL_FLAGS_WRITE 1
+#define CHANNEL_FLAGS_INUSE 2
+#define CHANNEL_FLAGS_BUFSIZE_CHANGED 4
+#define CHANNEL_FLAGS_FAILED 8
+#define CHANNEL_FLAGS_WAITIRQ 16
+#define CHANNEL_FLAGS_RWMASK 1
+#define CHANNEL_DIRECTION(f) (f & CHANNEL_FLAGS_RWMASK)
+
+#define LOG_FLAG_ILLEGALPKT 1
+#define LOG_FLAG_ILLEGALSIZE 2
+#define LOG_FLAG_OVERRUN 4
+#define LOG_FLAG_NOMEM 8
+
+#define CTC_LOGLEVEL_INFO 1
+#define CTC_LOGLEVEL_NOTICE 2
+#define CTC_LOGLEVEL_WARN 4
+#define CTC_LOGLEVEL_EMERG 8
+#define CTC_LOGLEVEL_ERR 16
+#define CTC_LOGLEVEL_DEBUG 32
+#define CTC_LOGLEVEL_CRIT 64
+
+#define CTC_LOGLEVEL_DEFAULT \
+(CTC_LOGLEVEL_INFO | CTC_LOGLEVEL_NOTICE | CTC_LOGLEVEL_WARN | CTC_LOGLEVEL_CRIT)
+
+#define CTC_LOGLEVEL_MAX ((CTC_LOGLEVEL_CRIT<<1)-1)
+
+#define ctc_pr_debug(fmt, arg...) \
+do { if (loglevel & CTC_LOGLEVEL_DEBUG) printk(KERN_DEBUG fmt,##arg); } while (0)
+
+#define ctc_pr_info(fmt, arg...) \
+do { if (loglevel & CTC_LOGLEVEL_INFO) printk(KERN_INFO fmt,##arg); } while (0)
+
+#define ctc_pr_notice(fmt, arg...) \
+do { if (loglevel & CTC_LOGLEVEL_NOTICE) printk(KERN_NOTICE fmt,##arg); } while (0)
+
+#define ctc_pr_warn(fmt, arg...) \
+do { if (loglevel & CTC_LOGLEVEL_WARN) printk(KERN_WARNING fmt,##arg); } while (0)
+
+#define ctc_pr_emerg(fmt, arg...) \
+do { if (loglevel & CTC_LOGLEVEL_EMERG) printk(KERN_EMERG fmt,##arg); } while (0)
+
+#define ctc_pr_err(fmt, arg...) \
+do { if (loglevel & CTC_LOGLEVEL_ERR) printk(KERN_ERR fmt,##arg); } while (0)
+
+#define ctc_pr_crit(fmt, arg...) \
+do { if (loglevel & CTC_LOGLEVEL_CRIT) printk(KERN_CRIT fmt,##arg); } while (0)
+
+struct ctc_priv {
+ struct net_device_stats stats;
+ unsigned long tbusy;
+ /**
+ * The finite state machine of this interface.
+ */
+ fsm_instance *fsm;
+ /**
+ * The protocol of this device
+ */
+ __u16 protocol;
+ /**
+ * Timer for restarting after I/O Errors
+ */
+ fsm_timer restart_timer;
+
+ int buffer_size;
+
+ struct channel *channel[2];
+};
+
+/**
+ * Definition of our link level header.
+ */
+struct ll_header {
+ __u16 length;
+ __u16 type;
+ __u16 unused;
+};
+#define LL_HEADER_LENGTH (sizeof(struct ll_header))
+
+/**
+ * Compatibility macros for busy handling
+ * of network devices.
+ */
+static __inline__ void
+ctc_clear_busy(struct net_device * dev)
+{
+ clear_bit(0, &(((struct ctc_priv *) dev->priv)->tbusy));
+ if (((struct ctc_priv *)dev->priv)->protocol != CTC_PROTO_LINUX_TTY)
+ netif_wake_queue(dev);
+}
+
+static __inline__ int
+ctc_test_and_set_busy(struct net_device * dev)
+{
+ if (((struct ctc_priv *)dev->priv)->protocol != CTC_PROTO_LINUX_TTY)
+ netif_stop_queue(dev);
+ return test_and_set_bit(0, &((struct ctc_priv *) dev->priv)->tbusy);
+}
+
+#endif
diff --git a/drivers/s390/net/ctctty.c b/drivers/s390/net/ctctty.c
index 9257d60..3080393 100644
--- a/drivers/s390/net/ctctty.c
+++ b/drivers/s390/net/ctctty.c
@@ -1,5 +1,5 @@
/*
- * $Id: ctctty.c,v 1.26 2004/08/04 11:06:55 mschwide Exp $
+ * $Id: ctctty.c,v 1.29 2005/04/05 08:50:44 mschwide Exp $
*
* CTC / ESCON network driver, tty interface.
*
@@ -1056,8 +1056,7 @@
info->tty = 0;
tty->closing = 0;
if (info->blocked_open) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ/2);
+ msleep_interruptible(500);
wake_up_interruptible(&info->open_wait);
}
info->flags &= ~(CTC_ASYNC_NORMAL_ACTIVE | CTC_ASYNC_CLOSING);
diff --git a/drivers/s390/net/cu3088.c b/drivers/s390/net/cu3088.c
index 1b0a9f1..0075894 100644
--- a/drivers/s390/net/cu3088.c
+++ b/drivers/s390/net/cu3088.c
@@ -1,5 +1,5 @@
/*
- * $Id: cu3088.c,v 1.34 2004/06/15 13:16:27 pavlic Exp $
+ * $Id: cu3088.c,v 1.35 2005/03/30 19:28:52 richtera Exp $
*
* CTC / LCS ccw_device driver
*
@@ -39,6 +39,7 @@
"FICON channel",
"P390 LCS card",
"OSA LCS card",
+ "CLAW channel device",
"unknown channel type",
"unsupported channel type",
};
@@ -51,6 +52,7 @@
{ CCW_DEVICE(0x3088, 0x1e), .driver_info = channel_type_ficon },
{ CCW_DEVICE(0x3088, 0x01), .driver_info = channel_type_p390 },
{ CCW_DEVICE(0x3088, 0x60), .driver_info = channel_type_osa2 },
+ { CCW_DEVICE(0x3088, 0x61), .driver_info = channel_type_claw },
{ /* end of list */ }
};
diff --git a/drivers/s390/net/cu3088.h b/drivers/s390/net/cu3088.h
index 0ec49a8..1753661 100644
--- a/drivers/s390/net/cu3088.h
+++ b/drivers/s390/net/cu3088.h
@@ -23,6 +23,9 @@
/* Device is a OSA2 card */
channel_type_osa2,
+ /* Device is a CLAW channel device */
+ channel_type_claw,
+
/* Device is a channel, but we don't know
* anything about it */
channel_type_unknown,
diff --git a/drivers/s390/net/iucv.c b/drivers/s390/net/iucv.c
index 1ac6563..e08e74e 100644
--- a/drivers/s390/net/iucv.c
+++ b/drivers/s390/net/iucv.c
@@ -1,5 +1,5 @@
/*
- * $Id: iucv.c,v 1.43 2005/02/09 14:47:43 braunu Exp $
+ * $Id: iucv.c,v 1.45 2005/04/26 22:59:06 braunu Exp $
*
* IUCV network driver
*
@@ -29,7 +29,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * RELEASE-TAG: IUCV lowlevel driver $Revision: 1.43 $
+ * RELEASE-TAG: IUCV lowlevel driver $Revision: 1.45 $
*
*/
@@ -355,7 +355,7 @@
static void
iucv_banner(void)
{
- char vbuf[] = "$Revision: 1.43 $";
+ char vbuf[] = "$Revision: 1.45 $";
char *version = vbuf;
if ((version = strchr(version, ':'))) {
@@ -2553,12 +2553,12 @@
#endif
EXPORT_SYMBOL (iucv_reply_prmmsg);
EXPORT_SYMBOL (iucv_send);
-#if 0
EXPORT_SYMBOL (iucv_send2way);
EXPORT_SYMBOL (iucv_send2way_array);
-EXPORT_SYMBOL (iucv_send_array);
EXPORT_SYMBOL (iucv_send2way_prmmsg);
EXPORT_SYMBOL (iucv_send2way_prmmsg_array);
+#if 0
+EXPORT_SYMBOL (iucv_send_array);
EXPORT_SYMBOL (iucv_send_prmmsg);
EXPORT_SYMBOL (iucv_setmask);
#endif
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 0f76e94..cccfed2 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -11,7 +11,7 @@
* Frank Pavlic (pavlic@de.ibm.com) and
* Martin Schwidefsky <schwidefsky@de.ibm.com>
*
- * $Revision: 1.96 $ $Date: 2004/11/11 13:42:33 $
+ * $Revision: 1.98 $ $Date: 2005/04/18 13:41:29 $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -59,7 +59,7 @@
/**
* initialization string for output
*/
-#define VERSION_LCS_C "$Revision: 1.96 $"
+#define VERSION_LCS_C "$Revision: 1.98 $"
static char version[] __initdata = "LCS driver ("VERSION_LCS_C "/" VERSION_LCS_H ")";
static char debug_buffer[255];
@@ -1098,14 +1098,6 @@
PRINT_ERR("Query IPAssist failed. Assuming unsupported!\n");
return -EOPNOTSUPP;
}
- /* Print out supported assists: IPv6 */
- PRINT_INFO("LCS device %s %s IPv6 support\n", card->dev->name,
- (card->ip_assists_supported & LCS_IPASS_IPV6_SUPPORT) ?
- "with" : "without");
- /* Print out supported assist: Multicast */
- PRINT_INFO("LCS device %s %s Multicast support\n", card->dev->name,
- (card->ip_assists_supported & LCS_IPASS_MULTICAST_SUPPORT) ?
- "with" : "without");
if (card->ip_assists_supported & LCS_IPASS_MULTICAST_SUPPORT)
return 0;
return -EOPNOTSUPP;
@@ -1160,7 +1152,7 @@
}
}
/* re-insert all entries from the failed_list into ipm_list */
- list_for_each_entry(ipm, &failed_list, list) {
+ list_for_each_entry_safe(ipm, tmp, &failed_list, list) {
list_del_init(&ipm->list);
list_add_tail(&ipm->list, &card->ipm_list);
}
@@ -2198,30 +2190,39 @@
if (!dev)
goto out;
card->dev = dev;
-netdev_out:
card->dev->priv = card;
card->dev->open = lcs_open_device;
card->dev->stop = lcs_stop_device;
card->dev->hard_start_xmit = lcs_start_xmit;
card->dev->get_stats = lcs_getstats;
SET_MODULE_OWNER(dev);
- if (lcs_register_netdev(ccwgdev) != 0)
- goto out;
memcpy(card->dev->dev_addr, card->mac, LCS_MAC_LENGTH);
#ifdef CONFIG_IP_MULTICAST
if (!lcs_check_multicast_support(card))
card->dev->set_multicast_list = lcs_set_multicast_list;
#endif
- netif_stop_queue(card->dev);
+netdev_out:
lcs_set_allowed_threads(card,0xffffffff);
if (recover_state == DEV_STATE_RECOVER) {
lcs_set_multicast_list(card->dev);
card->dev->flags |= IFF_UP;
netif_wake_queue(card->dev);
card->state = DEV_STATE_UP;
- } else
+ } else {
lcs_stopcard(card);
+ }
+ if (lcs_register_netdev(ccwgdev) != 0)
+ goto out;
+
+ /* Print out supported assists: IPv6 */
+ PRINT_INFO("LCS device %s %s IPv6 support\n", card->dev->name,
+ (card->ip_assists_supported & LCS_IPASS_IPV6_SUPPORT) ?
+ "with" : "without");
+ /* Print out supported assist: Multicast */
+ PRINT_INFO("LCS device %s %s Multicast support\n", card->dev->name,
+ (card->ip_assists_supported & LCS_IPASS_MULTICAST_SUPPORT) ?
+ "with" : "without");
return 0;
out:
diff --git a/drivers/s390/net/qeth.h b/drivers/s390/net/qeth.h
index a341041..a755b57 100644
--- a/drivers/s390/net/qeth.h
+++ b/drivers/s390/net/qeth.h
@@ -24,7 +24,7 @@
#include "qeth_mpc.h"
-#define VERSION_QETH_H "$Revision: 1.135 $"
+#define VERSION_QETH_H "$Revision: 1.139 $"
#ifdef CONFIG_QETH_IPV6
#define QETH_VERSION_IPV6 ":IPv6"
@@ -288,7 +288,8 @@
#define QETH_TX_TIMEOUT 100 * HZ
#define QETH_HEADER_SIZE 32
#define MAX_PORTNO 15
-#define QETH_FAKE_LL_LEN ETH_HLEN
+#define QETH_FAKE_LL_LEN_ETH ETH_HLEN
+#define QETH_FAKE_LL_LEN_TR (sizeof(struct trh_hdr)-TR_MAXRIFLEN+sizeof(struct trllc))
#define QETH_FAKE_LL_V6_ADDR_POS 24
/*IPv6 address autoconfiguration stuff*/
@@ -369,6 +370,25 @@
} hdr;
} __attribute__ ((packed));
+/*TCP Segmentation Offload header*/
+struct qeth_hdr_ext_tso {
+ __u16 hdr_tot_len;
+ __u8 imb_hdr_no;
+ __u8 reserved;
+ __u8 hdr_type;
+ __u8 hdr_version;
+ __u16 hdr_len;
+ __u32 payload_len;
+ __u16 mss;
+ __u16 dg_hdr_len;
+ __u8 padding[16];
+} __attribute__ ((packed));
+
+struct qeth_hdr_tso {
+ struct qeth_hdr hdr; /*hdr->hdr.l3.xxx*/
+ struct qeth_hdr_ext_tso ext;
+} __attribute__ ((packed));
+
/* flags for qeth_hdr.flags */
#define QETH_HDR_PASSTHRU 0x10
@@ -866,6 +886,7 @@
return hdr;
}
+
inline static int
qeth_get_hlen(__u8 link_type)
{
@@ -873,19 +894,19 @@
switch (link_type) {
case QETH_LINK_TYPE_HSTR:
case QETH_LINK_TYPE_LANE_TR:
- return sizeof(struct qeth_hdr) + TR_HLEN;
+ return sizeof(struct qeth_hdr_tso) + TR_HLEN;
default:
#ifdef CONFIG_QETH_VLAN
- return sizeof(struct qeth_hdr) + VLAN_ETH_HLEN;
+ return sizeof(struct qeth_hdr_tso) + VLAN_ETH_HLEN;
#else
- return sizeof(struct qeth_hdr) + ETH_HLEN;
+ return sizeof(struct qeth_hdr_tso) + ETH_HLEN;
#endif
}
#else /* CONFIG_QETH_IPV6 */
#ifdef CONFIG_QETH_VLAN
- return sizeof(struct qeth_hdr) + VLAN_HLEN;
+ return sizeof(struct qeth_hdr_tso) + VLAN_HLEN;
#else
- return sizeof(struct qeth_hdr);
+ return sizeof(struct qeth_hdr_tso);
#endif
#endif /* CONFIG_QETH_IPV6 */
}
diff --git a/drivers/s390/net/qeth_eddp.c b/drivers/s390/net/qeth_eddp.c
index 7ee1c06..f94f1f25 100644
--- a/drivers/s390/net/qeth_eddp.c
+++ b/drivers/s390/net/qeth_eddp.c
@@ -1,6 +1,6 @@
/*
*
- * linux/drivers/s390/net/qeth_eddp.c ($Revision: 1.11 $)
+ * linux/drivers/s390/net/qeth_eddp.c ($Revision: 1.13 $)
*
* Enhanced Device Driver Packing (EDDP) support for the qeth driver.
*
@@ -8,7 +8,7 @@
*
* Author(s): Thomas Spatzier <tspat@de.ibm.com>
*
- * $Revision: 1.11 $ $Date: 2005/03/24 09:04:18 $
+ * $Revision: 1.13 $ $Date: 2005/05/04 20:19:18 $
*
*/
#include <linux/config.h>
@@ -85,7 +85,7 @@
qeth_eddp_buf_release_contexts(struct qeth_qdio_out_buffer *buf)
{
struct qeth_eddp_context_reference *ref;
-
+
QETH_DBF_TEXT(trace, 6, "eddprctx");
while (!list_empty(&buf->ctx_list)){
ref = list_entry(buf->ctx_list.next,
@@ -139,7 +139,7 @@
"buffer!\n");
goto out;
}
- }
+ }
/* check if the whole next skb fits into current buffer */
if ((QETH_MAX_BUFFER_ELEMENTS(queue->card) -
buf->next_element_to_fill)
@@ -152,7 +152,7 @@
* and increment ctx's refcnt */
must_refcnt = 1;
continue;
- }
+ }
if (must_refcnt){
must_refcnt = 0;
if (qeth_eddp_buf_ref_context(buf, ctx)){
@@ -202,40 +202,29 @@
return flush_cnt;
}
-static inline int
-qeth_get_skb_data_len(struct sk_buff *skb)
-{
- int len = skb->len;
- int i;
-
- for (i = 0; i < skb_shinfo(skb)->nr_frags; ++i)
- len -= skb_shinfo(skb)->frags[i].size;
- return len;
-}
-
static inline void
qeth_eddp_create_segment_hdrs(struct qeth_eddp_context *ctx,
- struct qeth_eddp_data *eddp)
+ struct qeth_eddp_data *eddp, int data_len)
{
u8 *page;
int page_remainder;
int page_offset;
- int hdr_len;
+ int pkt_len;
struct qeth_eddp_element *element;
QETH_DBF_TEXT(trace, 5, "eddpcrsh");
page = ctx->pages[ctx->offset >> PAGE_SHIFT];
page_offset = ctx->offset % PAGE_SIZE;
element = &ctx->elements[ctx->num_elements];
- hdr_len = eddp->nhl + eddp->thl;
+ pkt_len = eddp->nhl + eddp->thl + data_len;
/* FIXME: layer2 and VLAN !!! */
if (eddp->qh.hdr.l2.id == QETH_HEADER_TYPE_LAYER2)
- hdr_len += ETH_HLEN;
+ pkt_len += ETH_HLEN;
if (eddp->mac.h_proto == __constant_htons(ETH_P_8021Q))
- hdr_len += VLAN_HLEN;
- /* does complete header fit in current page ? */
+ pkt_len += VLAN_HLEN;
+ /* does complete packet fit in current page ? */
page_remainder = PAGE_SIZE - page_offset;
- if (page_remainder < (sizeof(struct qeth_hdr) + hdr_len)){
+ if (page_remainder < (sizeof(struct qeth_hdr) + pkt_len)){
/* no -> go to start of next page */
ctx->offset += page_remainder;
page = ctx->pages[ctx->offset >> PAGE_SHIFT];
@@ -281,7 +270,7 @@
int left_in_frag;
int copy_len;
u8 *src;
-
+
QETH_DBF_TEXT(trace, 5, "eddpcdtc");
if (skb_shinfo(eddp->skb)->nr_frags == 0) {
memcpy(dst, eddp->skb->data + eddp->skb_offset, len);
@@ -292,7 +281,7 @@
while (len > 0) {
if (eddp->frag < 0) {
/* we're in skb->data */
- left_in_frag = qeth_get_skb_data_len(eddp->skb)
+ left_in_frag = (eddp->skb->len - eddp->skb->data_len)
- eddp->skb_offset;
src = eddp->skb->data + eddp->skb_offset;
} else {
@@ -424,7 +413,7 @@
struct tcphdr *tcph;
int data_len;
u32 hcsum;
-
+
QETH_DBF_TEXT(trace, 5, "eddpftcp");
eddp->skb_offset = sizeof(struct qeth_hdr) + eddp->nhl + eddp->thl;
tcph = eddp->skb->h.th;
@@ -464,7 +453,7 @@
else
hcsum = qeth_eddp_check_tcp6_hdr(eddp, data_len);
/* fill the next segment into the context */
- qeth_eddp_create_segment_hdrs(ctx, eddp);
+ qeth_eddp_create_segment_hdrs(ctx, eddp, data_len);
qeth_eddp_create_segment_data_tcp(ctx, eddp, data_len, hcsum);
if (eddp->skb_offset >= eddp->skb->len)
break;
@@ -474,13 +463,13 @@
eddp->th.tcp.h.seq += data_len;
}
}
-
+
static inline int
qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx,
struct sk_buff *skb, struct qeth_hdr *qhdr)
{
struct qeth_eddp_data *eddp = NULL;
-
+
QETH_DBF_TEXT(trace, 5, "eddpficx");
/* create our segmentation headers and copy original headers */
if (skb->protocol == ETH_P_IP)
@@ -520,7 +509,7 @@
int hdr_len)
{
int skbs_per_page;
-
+
QETH_DBF_TEXT(trace, 5, "eddpcanp");
/* can we put multiple skbs in one page? */
skbs_per_page = PAGE_SIZE / (skb_shinfo(skb)->tso_size + hdr_len);
@@ -600,7 +589,7 @@
struct qeth_hdr *qhdr)
{
struct qeth_eddp_context *ctx = NULL;
-
+
QETH_DBF_TEXT(trace, 5, "creddpct");
if (skb->protocol == ETH_P_IP)
ctx = qeth_eddp_create_context_generic(card, skb,
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index 607b925..208127a 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -1,6 +1,6 @@
/*
*
- * linux/drivers/s390/net/qeth_main.c ($Revision: 1.206 $)
+ * linux/drivers/s390/net/qeth_main.c ($Revision: 1.214 $)
*
* Linux on zSeries OSA Express and HiperSockets support
*
@@ -12,7 +12,7 @@
* Frank Pavlic (pavlic@de.ibm.com) and
* Thomas Spatzier <tspat@de.ibm.com>
*
- * $Revision: 1.206 $ $Date: 2005/03/24 09:04:18 $
+ * $Revision: 1.214 $ $Date: 2005/05/04 20:19:18 $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -80,7 +80,7 @@
#include "qeth_eddp.h"
#include "qeth_tso.h"
-#define VERSION_QETH_C "$Revision: 1.206 $"
+#define VERSION_QETH_C "$Revision: 1.214 $"
static const char *version = "qeth S/390 OSA-Express driver";
/**
@@ -158,6 +158,9 @@
static int
qeth_set_online(struct ccwgroup_device *);
+static int
+__qeth_set_online(struct ccwgroup_device *gdev, int recovery_mode);
+
static struct qeth_ipaddr *
qeth_get_addr_buffer(enum qeth_prot_versions);
@@ -510,10 +513,10 @@
wake_up(&card->wait_q);
}
-static int qeth_stop_card(struct qeth_card *);
+static int qeth_stop_card(struct qeth_card *, int);
static int
-qeth_set_offline(struct ccwgroup_device *cgdev)
+__qeth_set_offline(struct ccwgroup_device *cgdev, int recovery_mode)
{
struct qeth_card *card = (struct qeth_card *) cgdev->dev.driver_data;
int rc = 0;
@@ -523,7 +526,7 @@
QETH_DBF_HEX(setup, 3, &card, sizeof(void *));
recover_flag = card->state;
- if (qeth_stop_card(card) == -ERESTARTSYS){
+ if (qeth_stop_card(card, recovery_mode) == -ERESTARTSYS){
PRINT_WARN("Stopping card %s interrupted by user!\n",
CARD_BUS_ID(card));
return -ERESTARTSYS;
@@ -540,6 +543,12 @@
}
static int
+qeth_set_offline(struct ccwgroup_device *cgdev)
+{
+ return __qeth_set_offline(cgdev, 0);
+}
+
+static int
qeth_wait_for_threads(struct qeth_card *card, unsigned long threads);
@@ -953,8 +962,8 @@
PRINT_WARN("Recovery of device %s started ...\n",
CARD_BUS_ID(card));
card->use_hard_stop = 1;
- qeth_set_offline(card->gdev);
- rc = qeth_set_online(card->gdev);
+ __qeth_set_offline(card->gdev,1);
+ rc = __qeth_set_online(card->gdev,1);
if (!rc)
PRINT_INFO("Device %s successfully recovered!\n",
CARD_BUS_ID(card));
@@ -2152,9 +2161,15 @@
if (!skb_len)
return NULL;
if (card->options.fake_ll){
- if (!(skb = qeth_get_skb(skb_len + QETH_FAKE_LL_LEN)))
- goto no_mem;
- skb_pull(skb, QETH_FAKE_LL_LEN);
+ if(card->dev->type == ARPHRD_IEEE802_TR){
+ if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_TR)))
+ goto no_mem;
+ skb_reserve(skb,QETH_FAKE_LL_LEN_TR);
+ } else {
+ if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_ETH)))
+ goto no_mem;
+ skb_reserve(skb,QETH_FAKE_LL_LEN_ETH);
+ }
} else if (!(skb = qeth_get_skb(skb_len)))
goto no_mem;
data_ptr = element->addr + offset;
@@ -2229,14 +2244,68 @@
}
static inline void
-qeth_rebuild_skb_fake_ll(struct qeth_card *card, struct sk_buff *skb,
+qeth_rebuild_skb_fake_ll_tr(struct qeth_card *card, struct sk_buff *skb,
+ struct qeth_hdr *hdr)
+{
+ struct trh_hdr *fake_hdr;
+ struct trllc *fake_llc;
+ struct iphdr *ip_hdr;
+
+ QETH_DBF_TEXT(trace,5,"skbfktr");
+ skb->mac.raw = skb->data - QETH_FAKE_LL_LEN_TR;
+ /* this is a fake ethernet header */
+ fake_hdr = (struct trh_hdr *) skb->mac.raw;
+
+ /* the destination MAC address */
+ switch (skb->pkt_type){
+ case PACKET_MULTICAST:
+ switch (skb->protocol){
+#ifdef CONFIG_QETH_IPV6
+ case __constant_htons(ETH_P_IPV6):
+ ndisc_mc_map((struct in6_addr *)
+ skb->data + QETH_FAKE_LL_V6_ADDR_POS,
+ fake_hdr->daddr, card->dev, 0);
+ break;
+#endif /* CONFIG_QETH_IPV6 */
+ case __constant_htons(ETH_P_IP):
+ ip_hdr = (struct iphdr *)skb->data;
+ ip_tr_mc_map(ip_hdr->daddr, fake_hdr->daddr);
+ break;
+ default:
+ memcpy(fake_hdr->daddr, card->dev->dev_addr, TR_ALEN);
+ }
+ break;
+ case PACKET_BROADCAST:
+ memset(fake_hdr->daddr, 0xff, TR_ALEN);
+ break;
+ default:
+ memcpy(fake_hdr->daddr, card->dev->dev_addr, TR_ALEN);
+ }
+ /* the source MAC address */
+ if (hdr->hdr.l3.ext_flags & QETH_HDR_EXT_SRC_MAC_ADDR)
+ memcpy(fake_hdr->saddr, &hdr->hdr.l3.dest_addr[2], TR_ALEN);
+ else
+ memset(fake_hdr->saddr, 0, TR_ALEN);
+ fake_hdr->rcf=0;
+ fake_llc = (struct trllc*)&(fake_hdr->rcf);
+ fake_llc->dsap = EXTENDED_SAP;
+ fake_llc->ssap = EXTENDED_SAP;
+ fake_llc->llc = UI_CMD;
+ fake_llc->protid[0] = 0;
+ fake_llc->protid[1] = 0;
+ fake_llc->protid[2] = 0;
+ fake_llc->ethertype = ETH_P_IP;
+}
+
+static inline void
+qeth_rebuild_skb_fake_ll_eth(struct qeth_card *card, struct sk_buff *skb,
struct qeth_hdr *hdr)
{
struct ethhdr *fake_hdr;
struct iphdr *ip_hdr;
- QETH_DBF_TEXT(trace,5,"skbfake");
- skb->mac.raw = skb->data - QETH_FAKE_LL_LEN;
+ QETH_DBF_TEXT(trace,5,"skbfketh");
+ skb->mac.raw = skb->data - QETH_FAKE_LL_LEN_ETH;
/* this is a fake ethernet header */
fake_hdr = (struct ethhdr *) skb->mac.raw;
@@ -2253,10 +2322,7 @@
#endif /* CONFIG_QETH_IPV6 */
case __constant_htons(ETH_P_IP):
ip_hdr = (struct iphdr *)skb->data;
- if (card->dev->type == ARPHRD_IEEE802_TR)
- ip_tr_mc_map(ip_hdr->daddr, fake_hdr->h_dest);
- else
- ip_eth_mc_map(ip_hdr->daddr, fake_hdr->h_dest);
+ ip_eth_mc_map(ip_hdr->daddr, fake_hdr->h_dest);
break;
default:
memcpy(fake_hdr->h_dest, card->dev->dev_addr, ETH_ALEN);
@@ -2278,6 +2344,16 @@
}
static inline void
+qeth_rebuild_skb_fake_ll(struct qeth_card *card, struct sk_buff *skb,
+ struct qeth_hdr *hdr)
+{
+ if (card->dev->type == ARPHRD_IEEE802_TR)
+ qeth_rebuild_skb_fake_ll_tr(card, skb, hdr);
+ else
+ qeth_rebuild_skb_fake_ll_eth(card, skb, hdr);
+}
+
+static inline void
qeth_rebuild_skb_vlan(struct qeth_card *card, struct sk_buff *skb,
struct qeth_hdr *hdr)
{
@@ -3440,16 +3516,25 @@
unsigned short type, void *daddr, void *saddr,
unsigned len)
{
- struct ethhdr *hdr;
+ if(dev->type == ARPHRD_IEEE802_TR){
+ struct trh_hdr *hdr;
+ hdr = (struct trh_hdr *)skb_push(skb, QETH_FAKE_LL_LEN_TR);
+ memcpy(hdr->saddr, dev->dev_addr, TR_ALEN);
+ memcpy(hdr->daddr, "FAKELL", TR_ALEN);
+ return QETH_FAKE_LL_LEN_TR;
- hdr = (struct ethhdr *)skb_push(skb, QETH_FAKE_LL_LEN);
- memcpy(hdr->h_source, dev->dev_addr, ETH_ALEN);
- memcpy(hdr->h_dest, "FAKELL", ETH_ALEN);
- if (type != ETH_P_802_3)
- hdr->h_proto = htons(type);
- else
- hdr->h_proto = htons(len);
- return QETH_FAKE_LL_LEN;
+ } else {
+ struct ethhdr *hdr;
+ hdr = (struct ethhdr *)skb_push(skb, QETH_FAKE_LL_LEN_ETH);
+ memcpy(hdr->h_source, dev->dev_addr, ETH_ALEN);
+ memcpy(hdr->h_dest, "FAKELL", ETH_ALEN);
+ if (type != ETH_P_802_3)
+ hdr->h_proto = htons(type);
+ else
+ hdr->h_proto = htons(len);
+ return QETH_FAKE_LL_LEN_ETH;
+
+ }
}
static inline int
@@ -3710,16 +3795,12 @@
qeth_prepare_skb(struct qeth_card *card, struct sk_buff **skb,
struct qeth_hdr **hdr, int ipv)
{
- int rc = 0;
#ifdef CONFIG_QETH_VLAN
u16 *tag;
#endif
QETH_DBF_TEXT(trace, 6, "prepskb");
- rc = qeth_realloc_headroom(card, skb, sizeof(struct qeth_hdr));
- if (rc)
- return rc;
#ifdef CONFIG_QETH_VLAN
if (card->vlangrp && vlan_tx_tag_present(*skb) &&
((ipv == 6) || card->options.layer2) ) {
@@ -3882,9 +3963,15 @@
memcpy(hdr->hdr.l3.dest_addr, &skb->nh.ipv6h->daddr, 16);
}
} else { /* passthrough */
- if (!memcmp(skb->data + sizeof(struct qeth_hdr),
+ if((skb->dev->type == ARPHRD_IEEE802_TR) &&
+ !memcmp(skb->data + sizeof(struct qeth_hdr) +
+ sizeof(__u16), skb->dev->broadcast, 6)) {
+ hdr->hdr.l3.flags = QETH_CAST_BROADCAST |
+ QETH_HDR_PASSTHRU;
+ } else if (!memcmp(skb->data + sizeof(struct qeth_hdr),
skb->dev->broadcast, 6)) { /* broadcast? */
- hdr->hdr.l3.flags = QETH_CAST_BROADCAST | QETH_HDR_PASSTHRU;
+ hdr->hdr.l3.flags = QETH_CAST_BROADCAST |
+ QETH_HDR_PASSTHRU;
} else {
hdr->hdr.l3.flags = (cast_type == RTN_MULTICAST) ?
QETH_CAST_MULTICAST | QETH_HDR_PASSTHRU :
@@ -3894,67 +3981,29 @@
}
static inline void
-__qeth_fill_buffer_frag(struct sk_buff *skb, struct qdio_buffer *buffer,
- int *next_element_to_fill)
-{
- int length = skb->len;
- struct skb_frag_struct *frag;
- int fragno;
- unsigned long addr;
- int element;
- int first_lap = 1;
-
- fragno = skb_shinfo(skb)->nr_frags; /* start with last frag */
- element = *next_element_to_fill + fragno;
- while (length > 0) {
- if (fragno > 0) {
- frag = &skb_shinfo(skb)->frags[fragno - 1];
- addr = (page_to_pfn(frag->page) << PAGE_SHIFT) +
- frag->page_offset;
- buffer->element[element].addr = (char *)addr;
- buffer->element[element].length = frag->size;
- length -= frag->size;
- if (first_lap)
- buffer->element[element].flags =
- SBAL_FLAGS_LAST_FRAG;
- else
- buffer->element[element].flags =
- SBAL_FLAGS_MIDDLE_FRAG;
- } else {
- buffer->element[element].addr = skb->data;
- buffer->element[element].length = length;
- length = 0;
- buffer->element[element].flags =
- SBAL_FLAGS_FIRST_FRAG;
- }
- element--;
- fragno--;
- first_lap = 0;
- }
- *next_element_to_fill += skb_shinfo(skb)->nr_frags + 1;
-}
-
-static inline void
__qeth_fill_buffer(struct sk_buff *skb, struct qdio_buffer *buffer,
- int *next_element_to_fill)
+ int is_tso, int *next_element_to_fill)
{
int length = skb->len;
int length_here;
int element;
char *data;
- int first_lap = 1;
+ int first_lap ;
element = *next_element_to_fill;
data = skb->data;
+ first_lap = (is_tso == 0 ? 1 : 0);
+
while (length > 0) {
/* length_here is the remaining amount of data in this page */
length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE);
if (length < length_here)
length_here = length;
+
buffer->element[element].addr = data;
buffer->element[element].length = length_here;
length -= length_here;
- if (!length){
+ if (!length) {
if (first_lap)
buffer->element[element].flags = 0;
else
@@ -3981,17 +4030,35 @@
struct sk_buff *skb)
{
struct qdio_buffer *buffer;
- int flush_cnt = 0;
+ struct qeth_hdr_tso *hdr;
+ int flush_cnt = 0, hdr_len, large_send = 0;
QETH_DBF_TEXT(trace, 6, "qdfillbf");
+
buffer = buf->buffer;
atomic_inc(&skb->users);
skb_queue_tail(&buf->skb_list, skb);
+
+ hdr = (struct qeth_hdr_tso *) skb->data;
+ /*check first on TSO ....*/
+ if (hdr->hdr.hdr.l3.id == QETH_HEADER_TYPE_TSO) {
+ int element = buf->next_element_to_fill;
+
+ hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len;
+ /*fill first buffer entry only with header information */
+ buffer->element[element].addr = skb->data;
+ buffer->element[element].length = hdr_len;
+ buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG;
+ buf->next_element_to_fill++;
+ skb->data += hdr_len;
+ skb->len -= hdr_len;
+ large_send = 1;
+ }
if (skb_shinfo(skb)->nr_frags == 0)
- __qeth_fill_buffer(skb, buffer,
+ __qeth_fill_buffer(skb, buffer, large_send,
(int *)&buf->next_element_to_fill);
else
- __qeth_fill_buffer_frag(skb, buffer,
+ __qeth_fill_buffer_frag(skb, buffer, large_send,
(int *)&buf->next_element_to_fill);
if (!queue->do_pack) {
@@ -4184,6 +4251,25 @@
}
static inline int
+qeth_get_elements_no(struct qeth_card *card, void *hdr, struct sk_buff *skb)
+{
+ int elements_needed = 0;
+
+ if (skb_shinfo(skb)->nr_frags > 0) {
+ elements_needed = (skb_shinfo(skb)->nr_frags + 1);
+ }
+ if (elements_needed == 0 )
+ elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE)
+ + skb->len) >> PAGE_SHIFT);
+ if (elements_needed > QETH_MAX_BUFFER_ELEMENTS(card)){
+ PRINT_ERR("qeth_do_send_packet: invalid size of "
+ "IP packet. Discarded.");
+ return 0;
+ }
+ return elements_needed;
+}
+
+static inline int
qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
{
int ipv = 0;
@@ -4205,7 +4291,11 @@
dev_kfree_skb_irq(skb);
return 0;
}
- skb_pull(skb, QETH_FAKE_LL_LEN);
+ if(card->dev->type == ARPHRD_IEEE802_TR){
+ skb_pull(skb, QETH_FAKE_LL_LEN_TR);
+ } else {
+ skb_pull(skb, QETH_FAKE_LL_LEN_ETH);
+ }
}
}
cast_type = qeth_get_cast_type(card, skb);
@@ -4221,19 +4311,25 @@
if (skb_shinfo(skb)->tso_size)
large_send = card->options.large_send;
- if ((rc = qeth_prepare_skb(card, &skb, &hdr, ipv))){
- QETH_DBF_TEXT_(trace, 4, "pskbe%d", rc);
- return rc;
- }
/*are we able to do TSO ? If so ,prepare and send it from here */
if ((large_send == QETH_LARGE_SEND_TSO) &&
(cast_type == RTN_UNSPEC)) {
- rc = qeth_tso_send_packet(card, skb, queue,
- ipv, cast_type);
- goto do_statistics;
+ rc = qeth_tso_prepare_packet(card, skb, ipv, cast_type);
+ if (rc) {
+ card->stats.tx_dropped++;
+ card->stats.tx_errors++;
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ elements_needed++;
+ } else {
+ if ((rc = qeth_prepare_skb(card, &skb, &hdr, ipv))) {
+ QETH_DBF_TEXT_(trace, 4, "pskbe%d", rc);
+ return rc;
+ }
+ qeth_fill_header(card, hdr, skb, ipv, cast_type);
}
- qeth_fill_header(card, hdr, skb, ipv, cast_type);
if (large_send == QETH_LARGE_SEND_EDDP) {
ctx = qeth_eddp_create_context(card, skb, hdr);
if (ctx == NULL) {
@@ -4241,7 +4337,7 @@
return -EINVAL;
}
} else {
- elements_needed = qeth_get_elements_no(card,(void*) hdr, skb);
+ elements_needed += qeth_get_elements_no(card,(void*) hdr, skb);
if (!elements_needed)
return -EINVAL;
}
@@ -4252,12 +4348,12 @@
else
rc = qeth_do_send_packet_fast(card, queue, skb, hdr,
elements_needed, ctx);
-do_statistics:
if (!rc){
card->stats.tx_packets++;
card->stats.tx_bytes += skb->len;
#ifdef CONFIG_QETH_PERF_STATS
- if (skb_shinfo(skb)->tso_size) {
+ if (skb_shinfo(skb)->tso_size &&
+ !(large_send == QETH_LARGE_SEND_NO)) {
card->perf_stats.large_send_bytes += skb->len;
card->perf_stats.large_send_cnt++;
}
@@ -7154,7 +7250,7 @@
}
static int
-qeth_stop_card(struct qeth_card *card)
+qeth_stop_card(struct qeth_card *card, int recovery_mode)
{
int rc = 0;
@@ -7167,9 +7263,13 @@
if (card->read.state == CH_STATE_UP &&
card->write.state == CH_STATE_UP &&
(card->state == CARD_STATE_UP)) {
- rtnl_lock();
- dev_close(card->dev);
- rtnl_unlock();
+ if(recovery_mode) {
+ qeth_stop(card->dev);
+ } else {
+ rtnl_lock();
+ dev_close(card->dev);
+ rtnl_unlock();
+ }
if (!card->use_hard_stop) {
__u8 *mac = &card->dev->dev_addr[0];
rc = qeth_layer2_send_delmac(card, mac);
@@ -7341,13 +7441,17 @@
}
static void
-qeth_start_again(struct qeth_card *card)
+qeth_start_again(struct qeth_card *card, int recovery_mode)
{
QETH_DBF_TEXT(setup ,2, "startag");
- rtnl_lock();
- dev_open(card->dev);
- rtnl_unlock();
+ if(recovery_mode) {
+ qeth_open(card->dev);
+ } else {
+ rtnl_lock();
+ dev_open(card->dev);
+ rtnl_unlock();
+ }
/* this also sets saved unicast addresses */
qeth_set_multicast_list(card->dev);
}
@@ -7404,7 +7508,7 @@
static int
-qeth_set_online(struct ccwgroup_device *gdev)
+__qeth_set_online(struct ccwgroup_device *gdev, int recovery_mode)
{
struct qeth_card *card = gdev->dev.driver_data;
int rc = 0;
@@ -7464,12 +7568,12 @@
* we can also use this state for recovery purposes*/
qeth_set_allowed_threads(card, 0xffffffff, 0);
if (recover_flag == CARD_STATE_RECOVER)
- qeth_start_again(card);
+ qeth_start_again(card, recovery_mode);
qeth_notify_processes();
return 0;
out_remove:
card->use_hard_stop = 1;
- qeth_stop_card(card);
+ qeth_stop_card(card, 0);
ccw_device_set_offline(CARD_DDEV(card));
ccw_device_set_offline(CARD_WDEV(card));
ccw_device_set_offline(CARD_RDEV(card));
@@ -7480,6 +7584,12 @@
return -ENODEV;
}
+static int
+qeth_set_online(struct ccwgroup_device *gdev)
+{
+ return __qeth_set_online(gdev, 0);
+}
+
static struct ccw_device_id qeth_ids[] = {
{CCW_DEVICE(0x1731, 0x01), driver_info:QETH_CARD_TYPE_OSAE},
{CCW_DEVICE(0x1731, 0x05), driver_info:QETH_CARD_TYPE_IQD},
diff --git a/drivers/s390/net/qeth_tso.c b/drivers/s390/net/qeth_tso.c
deleted file mode 100644
index c919762..0000000
--- a/drivers/s390/net/qeth_tso.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * linux/drivers/s390/net/qeth_tso.c ($Revision: 1.6 $)
- *
- * Header file for qeth TCP Segmentation Offload support.
- *
- * Copyright 2004 IBM Corporation
- *
- * Author(s): Frank Pavlic <pavlic@de.ibm.com>
- *
- * $Revision: 1.6 $ $Date: 2005/03/24 09:04:18 $
- *
- */
-
-#include <linux/skbuff.h>
-#include <linux/tcp.h>
-#include <linux/ip.h>
-#include <linux/ipv6.h>
-#include <net/ip6_checksum.h>
-#include "qeth.h"
-#include "qeth_mpc.h"
-#include "qeth_tso.h"
-
-/**
- * skb already partially prepared
- * classic qdio header in skb->data
- * */
-static inline struct qeth_hdr_tso *
-qeth_tso_prepare_skb(struct qeth_card *card, struct sk_buff **skb)
-{
- int rc = 0;
-
- QETH_DBF_TEXT(trace, 5, "tsoprsk");
- rc = qeth_realloc_headroom(card, skb,sizeof(struct qeth_hdr_ext_tso));
- if (rc)
- return NULL;
-
- return qeth_push_skb(card, skb, sizeof(struct qeth_hdr_ext_tso));
-}
-
-/**
- * fill header for a TSO packet
- */
-static inline void
-qeth_tso_fill_header(struct qeth_card *card, struct sk_buff *skb)
-{
- struct qeth_hdr_tso *hdr;
- struct tcphdr *tcph;
- struct iphdr *iph;
-
- QETH_DBF_TEXT(trace, 5, "tsofhdr");
-
- hdr = (struct qeth_hdr_tso *) skb->data;
- iph = skb->nh.iph;
- tcph = skb->h.th;
- /*fix header to TSO values ...*/
- hdr->hdr.hdr.l3.id = QETH_HEADER_TYPE_TSO;
- /*set values which are fix for the first approach ...*/
- hdr->ext.hdr_tot_len = (__u16) sizeof(struct qeth_hdr_ext_tso);
- hdr->ext.imb_hdr_no = 1;
- hdr->ext.hdr_type = 1;
- hdr->ext.hdr_version = 1;
- hdr->ext.hdr_len = 28;
- /*insert non-fix values */
- hdr->ext.mss = skb_shinfo(skb)->tso_size;
- hdr->ext.dg_hdr_len = (__u16)(iph->ihl*4 + tcph->doff*4);
- hdr->ext.payload_len = (__u16)(skb->len - hdr->ext.dg_hdr_len -
- sizeof(struct qeth_hdr_tso));
-}
-
-/**
- * change some header values as requested by hardware
- */
-static inline void
-qeth_tso_set_tcpip_header(struct qeth_card *card, struct sk_buff *skb)
-{
- struct iphdr *iph;
- struct ipv6hdr *ip6h;
- struct tcphdr *tcph;
-
- iph = skb->nh.iph;
- ip6h = skb->nh.ipv6h;
- tcph = skb->h.th;
-
- tcph->check = 0;
- if (skb->protocol == ETH_P_IPV6) {
- ip6h->payload_len = 0;
- tcph->check = ~csum_ipv6_magic(&ip6h->saddr, &ip6h->daddr,
- 0, IPPROTO_TCP, 0);
- return;
- }
- /*OSA want us to set these values ...*/
- tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
- 0, IPPROTO_TCP, 0);
- iph->tot_len = 0;
- iph->check = 0;
-}
-
-static inline struct qeth_hdr_tso *
-qeth_tso_prepare_packet(struct qeth_card *card, struct sk_buff *skb,
- int ipv, int cast_type)
-{
- struct qeth_hdr_tso *hdr;
- int rc = 0;
-
- QETH_DBF_TEXT(trace, 5, "tsoprep");
-
- /*get headroom for tso qdio header */
- hdr = (struct qeth_hdr_tso *) qeth_tso_prepare_skb(card, &skb);
- if (hdr == NULL) {
- QETH_DBF_TEXT_(trace, 4, "2err%d", rc);
- return NULL;
- }
- memset(hdr, 0, sizeof(struct qeth_hdr_tso));
- /*fill first 32 bytes of qdio header as used
- *FIXME: TSO has two struct members
- * with different names but same size
- * */
- qeth_fill_header(card, &hdr->hdr, skb, ipv, cast_type);
- qeth_tso_fill_header(card, skb);
- qeth_tso_set_tcpip_header(card, skb);
- return hdr;
-}
-
-static inline int
-qeth_tso_get_queue_buffer(struct qeth_qdio_out_q *queue)
-{
- struct qeth_qdio_out_buffer *buffer;
- int flush_cnt = 0;
-
- QETH_DBF_TEXT(trace, 5, "tsobuf");
-
- /* force to non-packing*/
- if (queue->do_pack)
- queue->do_pack = 0;
- buffer = &queue->bufs[queue->next_buf_to_fill];
- /* get a new buffer if current is already in use*/
- if ((atomic_read(&buffer->state) == QETH_QDIO_BUF_EMPTY) &&
- (buffer->next_element_to_fill > 0)) {
- atomic_set(&buffer->state, QETH_QDIO_BUF_PRIMED);
- queue->next_buf_to_fill = (queue->next_buf_to_fill + 1) %
- QDIO_MAX_BUFFERS_PER_Q;
- flush_cnt++;
- }
- return flush_cnt;
-}
-
-static inline void
-__qeth_tso_fill_buffer_frag(struct qeth_qdio_out_buffer *buf,
- struct sk_buff *skb)
-{
- struct skb_frag_struct *frag;
- struct qdio_buffer *buffer;
- int fragno, cnt, element;
- unsigned long addr;
-
- QETH_DBF_TEXT(trace, 6, "tsfilfrg");
-
- /*initialize variables ...*/
- fragno = skb_shinfo(skb)->nr_frags;
- buffer = buf->buffer;
- element = buf->next_element_to_fill;
- /*fill buffer elements .....*/
- for (cnt = 0; cnt < fragno; cnt++) {
- frag = &skb_shinfo(skb)->frags[cnt];
- addr = (page_to_pfn(frag->page) << PAGE_SHIFT) +
- frag->page_offset;
- buffer->element[element].addr = (char *)addr;
- buffer->element[element].length = frag->size;
- if (cnt < (fragno - 1))
- buffer->element[element].flags =
- SBAL_FLAGS_MIDDLE_FRAG;
- else
- buffer->element[element].flags =
- SBAL_FLAGS_LAST_FRAG;
- element++;
- }
- buf->next_element_to_fill = element;
-}
-
-static inline int
-qeth_tso_fill_buffer(struct qeth_qdio_out_buffer *buf,
- struct sk_buff *skb)
-{
- int length, length_here, element;
- int hdr_len;
- struct qdio_buffer *buffer;
- struct qeth_hdr_tso *hdr;
- char *data;
-
- QETH_DBF_TEXT(trace, 3, "tsfilbuf");
-
- /*increment user count and queue skb ...*/
- atomic_inc(&skb->users);
- skb_queue_tail(&buf->skb_list, skb);
-
- /*initialize all variables...*/
- buffer = buf->buffer;
- hdr = (struct qeth_hdr_tso *)skb->data;
- hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len;
- data = skb->data + hdr_len;
- length = skb->len - hdr_len;
- element = buf->next_element_to_fill;
- /*fill first buffer entry only with header information */
- buffer->element[element].addr = skb->data;
- buffer->element[element].length = hdr_len;
- buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG;
- buf->next_element_to_fill++;
-
- if (skb_shinfo(skb)->nr_frags > 0) {
- __qeth_tso_fill_buffer_frag(buf, skb);
- goto out;
- }
-
- /*start filling buffer entries ...*/
- element++;
- while (length > 0) {
- /* length_here is the remaining amount of data in this page */
- length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE);
- if (length < length_here)
- length_here = length;
- buffer->element[element].addr = data;
- buffer->element[element].length = length_here;
- length -= length_here;
- if (!length)
- buffer->element[element].flags =
- SBAL_FLAGS_LAST_FRAG;
- else
- buffer->element[element].flags =
- SBAL_FLAGS_MIDDLE_FRAG;
- data += length_here;
- element++;
- }
- /*set the buffer to primed ...*/
- buf->next_element_to_fill = element;
-out:
- atomic_set(&buf->state, QETH_QDIO_BUF_PRIMED);
- return 1;
-}
-
-int
-qeth_tso_send_packet(struct qeth_card *card, struct sk_buff *skb,
- struct qeth_qdio_out_q *queue, int ipv, int cast_type)
-{
- int flush_cnt = 0;
- struct qeth_hdr_tso *hdr;
- struct qeth_qdio_out_buffer *buffer;
- int start_index;
-
- QETH_DBF_TEXT(trace, 3, "tsosend");
-
- if (!(hdr = qeth_tso_prepare_packet(card, skb, ipv, cast_type)))
- return -ENOMEM;
- /*check if skb fits in one SBAL ...*/
- if (!(qeth_get_elements_no(card, (void*)hdr, skb)))
- return -EINVAL;
- /*lock queue, force switching to non-packing and send it ...*/
- while (atomic_compare_and_swap(QETH_OUT_Q_UNLOCKED,
- QETH_OUT_Q_LOCKED,
- &queue->state));
- start_index = queue->next_buf_to_fill;
- buffer = &queue->bufs[queue->next_buf_to_fill];
- /*check if card is too busy ...*/
- if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY){
- card->stats.tx_dropped++;
- goto out;
- }
- /*let's force to non-packing and get a new SBAL*/
- flush_cnt += qeth_tso_get_queue_buffer(queue);
- buffer = &queue->bufs[queue->next_buf_to_fill];
- if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY) {
- card->stats.tx_dropped++;
- goto out;
- }
- flush_cnt += qeth_tso_fill_buffer(buffer, skb);
- queue->next_buf_to_fill = (queue->next_buf_to_fill + 1) %
- QDIO_MAX_BUFFERS_PER_Q;
-out:
- atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
- if (flush_cnt)
- qeth_flush_buffers(queue, 0, start_index, flush_cnt);
- /*do some statistics */
- card->stats.tx_packets++;
- card->stats.tx_bytes += skb->len;
- return 0;
-}
diff --git a/drivers/s390/net/qeth_tso.h b/drivers/s390/net/qeth_tso.h
index 83504de..ad33e6f 100644
--- a/drivers/s390/net/qeth_tso.h
+++ b/drivers/s390/net/qeth_tso.h
@@ -1,5 +1,5 @@
/*
- * linux/drivers/s390/net/qeth_tso.h ($Revision: 1.4 $)
+ * linux/drivers/s390/net/qeth_tso.h ($Revision: 1.7 $)
*
* Header file for qeth TCP Segmentation Offload support.
*
@@ -7,52 +7,148 @@
*
* Author(s): Frank Pavlic <pavlic@de.ibm.com>
*
- * $Revision: 1.4 $ $Date: 2005/03/24 09:04:18 $
+ * $Revision: 1.7 $ $Date: 2005/05/04 20:19:18 $
*
*/
#ifndef __QETH_TSO_H__
#define __QETH_TSO_H__
+#include <linux/skbuff.h>
+#include <linux/tcp.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <net/ip6_checksum.h>
+#include "qeth.h"
+#include "qeth_mpc.h"
-extern int
-qeth_tso_send_packet(struct qeth_card *, struct sk_buff *,
- struct qeth_qdio_out_q *, int , int);
-struct qeth_hdr_ext_tso {
- __u16 hdr_tot_len;
- __u8 imb_hdr_no;
- __u8 reserved;
- __u8 hdr_type;
- __u8 hdr_version;
- __u16 hdr_len;
- __u32 payload_len;
- __u16 mss;
- __u16 dg_hdr_len;
- __u8 padding[16];
-} __attribute__ ((packed));
+static inline struct qeth_hdr_tso *
+qeth_tso_prepare_skb(struct qeth_card *card, struct sk_buff **skb)
+{
+ QETH_DBF_TEXT(trace, 5, "tsoprsk");
+ return qeth_push_skb(card, skb, sizeof(struct qeth_hdr_tso));
+}
-struct qeth_hdr_tso {
- struct qeth_hdr hdr; /*hdr->hdr.l3.xxx*/
- struct qeth_hdr_ext_tso ext;
-} __attribute__ ((packed));
+/**
+ * fill header for a TSO packet
+ */
+static inline void
+qeth_tso_fill_header(struct qeth_card *card, struct sk_buff *skb)
+{
+ struct qeth_hdr_tso *hdr;
+ struct tcphdr *tcph;
+ struct iphdr *iph;
-/*some helper functions*/
+ QETH_DBF_TEXT(trace, 5, "tsofhdr");
+
+ hdr = (struct qeth_hdr_tso *) skb->data;
+ iph = skb->nh.iph;
+ tcph = skb->h.th;
+ /*fix header to TSO values ...*/
+ hdr->hdr.hdr.l3.id = QETH_HEADER_TYPE_TSO;
+ /*set values which are fix for the first approach ...*/
+ hdr->ext.hdr_tot_len = (__u16) sizeof(struct qeth_hdr_ext_tso);
+ hdr->ext.imb_hdr_no = 1;
+ hdr->ext.hdr_type = 1;
+ hdr->ext.hdr_version = 1;
+ hdr->ext.hdr_len = 28;
+ /*insert non-fix values */
+ hdr->ext.mss = skb_shinfo(skb)->tso_size;
+ hdr->ext.dg_hdr_len = (__u16)(iph->ihl*4 + tcph->doff*4);
+ hdr->ext.payload_len = (__u16)(skb->len - hdr->ext.dg_hdr_len -
+ sizeof(struct qeth_hdr_tso));
+}
+
+/**
+ * change some header values as requested by hardware
+ */
+static inline void
+qeth_tso_set_tcpip_header(struct qeth_card *card, struct sk_buff *skb)
+{
+ struct iphdr *iph;
+ struct ipv6hdr *ip6h;
+ struct tcphdr *tcph;
+
+ iph = skb->nh.iph;
+ ip6h = skb->nh.ipv6h;
+ tcph = skb->h.th;
+
+ tcph->check = 0;
+ if (skb->protocol == ETH_P_IPV6) {
+ ip6h->payload_len = 0;
+ tcph->check = ~csum_ipv6_magic(&ip6h->saddr, &ip6h->daddr,
+ 0, IPPROTO_TCP, 0);
+ return;
+ }
+ /*OSA want us to set these values ...*/
+ tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
+ 0, IPPROTO_TCP, 0);
+ iph->tot_len = 0;
+ iph->check = 0;
+}
static inline int
-qeth_get_elements_no(struct qeth_card *card, void *hdr, struct sk_buff *skb)
+qeth_tso_prepare_packet(struct qeth_card *card, struct sk_buff *skb,
+ int ipv, int cast_type)
{
- int elements_needed = 0;
+ struct qeth_hdr_tso *hdr;
- if (skb_shinfo(skb)->nr_frags > 0)
- elements_needed = (skb_shinfo(skb)->nr_frags + 1);
- if (elements_needed == 0 )
- elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE)
- + skb->len) >> PAGE_SHIFT);
- if (elements_needed > QETH_MAX_BUFFER_ELEMENTS(card)){
- PRINT_ERR("qeth_do_send_packet: invalid size of "
- "IP packet. Discarded.");
- return 0;
+ QETH_DBF_TEXT(trace, 5, "tsoprep");
+
+ hdr = (struct qeth_hdr_tso *) qeth_tso_prepare_skb(card, &skb);
+ if (hdr == NULL) {
+ QETH_DBF_TEXT(trace, 4, "tsoperr");
+ return -ENOMEM;
}
- return elements_needed;
+ memset(hdr, 0, sizeof(struct qeth_hdr_tso));
+ /*fill first 32 bytes of qdio header as used
+ *FIXME: TSO has two struct members
+ * with different names but same size
+ * */
+ qeth_fill_header(card, &hdr->hdr, skb, ipv, cast_type);
+ qeth_tso_fill_header(card, skb);
+ qeth_tso_set_tcpip_header(card, skb);
+ return 0;
+}
+
+static inline void
+__qeth_fill_buffer_frag(struct sk_buff *skb, struct qdio_buffer *buffer,
+ int is_tso, int *next_element_to_fill)
+{
+ struct skb_frag_struct *frag;
+ int fragno;
+ unsigned long addr;
+ int element, cnt, dlen;
+
+ fragno = skb_shinfo(skb)->nr_frags;
+ element = *next_element_to_fill;
+ dlen = 0;
+
+ if (is_tso)
+ buffer->element[element].flags =
+ SBAL_FLAGS_MIDDLE_FRAG;
+ else
+ buffer->element[element].flags =
+ SBAL_FLAGS_FIRST_FRAG;
+ if ( (dlen = (skb->len - skb->data_len)) ) {
+ buffer->element[element].addr = skb->data;
+ buffer->element[element].length = dlen;
+ element++;
+ }
+ for (cnt = 0; cnt < fragno; cnt++) {
+ frag = &skb_shinfo(skb)->frags[cnt];
+ addr = (page_to_pfn(frag->page) << PAGE_SHIFT) +
+ frag->page_offset;
+ buffer->element[element].addr = (char *)addr;
+ buffer->element[element].length = frag->size;
+ if (cnt < (fragno - 1))
+ buffer->element[element].flags =
+ SBAL_FLAGS_MIDDLE_FRAG;
+ else
+ buffer->element[element].flags =
+ SBAL_FLAGS_LAST_FRAG;
+ element++;
+ }
+ *next_element_to_fill = element;
}
#endif /* __QETH_TSO_H__ */
diff --git a/drivers/sbus/char/aurora.c b/drivers/sbus/char/aurora.c
index e5fa170..650d5e9 100644
--- a/drivers/sbus/char/aurora.c
+++ b/drivers/sbus/char/aurora.c
@@ -81,10 +81,6 @@
int irqhit=0;
#endif
-#ifndef MIN
-#define MIN(a,b) ((a) < (b) ? (a) : (b))
-#endif
-
static struct tty_driver *aurora_driver;
static struct Aurora_board aurora_board[AURORA_NBOARD] = {
{0,},
@@ -594,7 +590,7 @@
&bp->r[chip]->r[CD180_TDR]);
port->COR2 &= ~COR2_ETC;
}
- count = MIN(port->break_length, 0xff);
+ count = min(port->break_length, 0xff);
sbus_writeb(CD180_C_ESC,
&bp->r[chip]->r[CD180_TDR]);
sbus_writeb(CD180_C_DELAY,
@@ -1575,7 +1571,7 @@
save_flags(flags);
while (1) {
cli();
- c = MIN(count, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
+ c = min(count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
SERIAL_XMIT_SIZE - port->xmit_head));
if (c <= 0) {
restore_flags(flags);
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index da5bd33..fc5263c 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -32,6 +32,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/dma-mapping.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -289,6 +290,8 @@
{
struct ahci_host_priv *hpriv = host_set->private_data;
kfree(hpriv);
+
+ ata_host_stop(host_set);
}
static int ahci_port_start(struct ata_port *ap)
diff --git a/drivers/scsi/aic7xxx/aic7770_osm.c b/drivers/scsi/aic7xxx/aic7770_osm.c
index c2b47f2..682ca0b 100644
--- a/drivers/scsi/aic7xxx/aic7770_osm.c
+++ b/drivers/scsi/aic7xxx/aic7770_osm.c
@@ -41,7 +41,6 @@
#include "aic7xxx_osm.h"
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
#include <linux/device.h>
#include <linux/eisa.h>
@@ -62,13 +61,6 @@
};
typedef struct device *aic7770_dev_t;
-#else
-#define MINSLOT 1
-#define NUMSLOTS 16
-#define IDOFFSET 0x80
-
-typedef void *aic7770_dev_t;
-#endif
static int aic7770_linux_config(struct aic7770_identity *entry,
aic7770_dev_t dev, u_int eisaBase);
@@ -76,7 +68,6 @@
int
ahc_linux_eisa_init(void)
{
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
struct eisa_device_id *eid;
struct aic7770_identity *id;
int i;
@@ -110,44 +101,6 @@
eid->sig[0] = 0;
return eisa_driver_register(&aic7770_driver);
-#else /* LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) */
- struct aic7770_identity *entry;
- u_int slot;
- u_int eisaBase;
- u_int i;
- int ret = -ENODEV;
-
- if (aic7xxx_probe_eisa_vl == 0)
- return ret;
-
- eisaBase = 0x1000 + AHC_EISA_SLOT_OFFSET;
- for (slot = 1; slot < NUMSLOTS; eisaBase+=0x1000, slot++) {
- uint32_t eisa_id;
- size_t id_size;
-
- if (request_region(eisaBase, AHC_EISA_IOSIZE, "aic7xxx") == 0)
- continue;
-
- eisa_id = 0;
- id_size = sizeof(eisa_id);
- for (i = 0; i < 4; i++) {
- /* VLcards require priming*/
- outb(0x80 + i, eisaBase + IDOFFSET);
- eisa_id |= inb(eisaBase + IDOFFSET + i)
- << ((id_size-i-1) * 8);
- }
- release_region(eisaBase, AHC_EISA_IOSIZE);
- if (eisa_id & 0x80000000)
- continue; /* no EISA card in slot */
-
- entry = aic7770_find_device(eisa_id);
- if (entry != NULL) {
- aic7770_linux_config(entry, NULL, eisaBase);
- ret = 0;
- }
- }
- return ret;
-#endif
}
void
@@ -187,11 +140,10 @@
ahc_free(ahc);
return (error);
}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+
dev->driver_data = (void *)ahc;
if (aic7xxx_detect_complete)
error = ahc_linux_register_host(ahc, &aic7xxx_driver_template);
-#endif
return (error);
}
@@ -225,7 +177,6 @@
return (-error);
}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
static int
aic7770_eisa_dev_probe(struct device *dev)
{
@@ -261,4 +212,3 @@
return (0);
}
-#endif
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 550c992..7c02b7d 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -2488,7 +2488,7 @@
sprintf(current->comm, "ahd_dv_%d", ahd->unit);
#else
daemonize("ahd_dv_%d", ahd->unit);
- current->flags |= PF_FREEZE;
+ current->flags |= PF_NOFREEZE;
#endif
unlock_kernel();
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index d978e4a..c13e563 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -134,11 +134,6 @@
#include "aiclib.c"
#include <linux/init.h> /* __setup */
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#include "sd.h" /* For geometry detection */
-#endif
-
#include <linux/mm.h> /* For fetching system memory size */
#include <linux/blkdev.h> /* For block_size() */
#include <linux/delay.h> /* For ssleep/msleep */
@@ -148,11 +143,6 @@
*/
spinlock_t ahc_list_spinlock;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-/* For dynamic sglist size calculation. */
-u_int ahc_linux_nseg;
-#endif
-
/*
* Set this to the delay in seconds after SCSI bus reset.
* Note, we honor this only for the initial bus reset.
@@ -436,15 +426,12 @@
struct ahc_linux_device *,
struct scb *);
static void ahc_linux_queue_cmd_complete(struct ahc_softc *ahc,
- Scsi_Cmnd *cmd);
+ struct scsi_cmnd *cmd);
static void ahc_linux_sem_timeout(u_long arg);
static void ahc_linux_freeze_simq(struct ahc_softc *ahc);
static void ahc_linux_release_simq(u_long arg);
-static void ahc_linux_dev_timed_unfreeze(u_long arg);
-static int ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag);
+static int ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag);
static void ahc_linux_initialize_scsi_bus(struct ahc_softc *ahc);
-static void ahc_linux_size_nseg(void);
-static void ahc_linux_thread_run_complete_queue(struct ahc_softc *ahc);
static u_int ahc_linux_user_tagdepth(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo);
static void ahc_linux_device_queue_depth(struct ahc_softc *ahc,
@@ -458,54 +445,27 @@
u_int);
static void ahc_linux_free_device(struct ahc_softc*,
struct ahc_linux_device*);
-static void ahc_linux_run_device_queue(struct ahc_softc*,
- struct ahc_linux_device*);
+static int ahc_linux_run_command(struct ahc_softc*,
+ struct ahc_linux_device *,
+ struct scsi_cmnd *);
static void ahc_linux_setup_tag_info_global(char *p);
static aic_option_callback_t ahc_linux_setup_tag_info;
static int aic7xxx_setup(char *s);
static int ahc_linux_next_unit(void);
-static void ahc_runq_tasklet(unsigned long data);
-static struct ahc_cmd *ahc_linux_run_complete_queue(struct ahc_softc *ahc);
/********************************* Inlines ************************************/
-static __inline void ahc_schedule_runq(struct ahc_softc *ahc);
static __inline struct ahc_linux_device*
ahc_linux_get_device(struct ahc_softc *ahc, u_int channel,
- u_int target, u_int lun, int alloc);
-static __inline void ahc_schedule_completeq(struct ahc_softc *ahc);
-static __inline void ahc_linux_check_device_queue(struct ahc_softc *ahc,
- struct ahc_linux_device *dev);
-static __inline struct ahc_linux_device *
- ahc_linux_next_device_to_run(struct ahc_softc *ahc);
-static __inline void ahc_linux_run_device_queues(struct ahc_softc *ahc);
+ u_int target, u_int lun);
static __inline void ahc_linux_unmap_scb(struct ahc_softc*, struct scb*);
static __inline int ahc_linux_map_seg(struct ahc_softc *ahc, struct scb *scb,
struct ahc_dma_seg *sg,
dma_addr_t addr, bus_size_t len);
-static __inline void
-ahc_schedule_completeq(struct ahc_softc *ahc)
-{
- if ((ahc->platform_data->flags & AHC_RUN_CMPLT_Q_TIMER) == 0) {
- ahc->platform_data->flags |= AHC_RUN_CMPLT_Q_TIMER;
- ahc->platform_data->completeq_timer.expires = jiffies;
- add_timer(&ahc->platform_data->completeq_timer);
- }
-}
-
-/*
- * Must be called with our lock held.
- */
-static __inline void
-ahc_schedule_runq(struct ahc_softc *ahc)
-{
- tasklet_schedule(&ahc->platform_data->runq_tasklet);
-}
-
static __inline struct ahc_linux_device*
ahc_linux_get_device(struct ahc_softc *ahc, u_int channel, u_int target,
- u_int lun, int alloc)
+ u_int lun)
{
struct ahc_linux_target *targ;
struct ahc_linux_device *dev;
@@ -515,102 +475,15 @@
if (channel != 0)
target_offset += 8;
targ = ahc->platform_data->targets[target_offset];
- if (targ == NULL) {
- if (alloc != 0) {
- targ = ahc_linux_alloc_target(ahc, channel, target);
- if (targ == NULL)
- return (NULL);
- } else
- return (NULL);
- }
+ BUG_ON(targ == NULL);
dev = targ->devices[lun];
- if (dev == NULL && alloc != 0)
- dev = ahc_linux_alloc_device(ahc, targ, lun);
- return (dev);
-}
-
-#define AHC_LINUX_MAX_RETURNED_ERRORS 4
-static struct ahc_cmd *
-ahc_linux_run_complete_queue(struct ahc_softc *ahc)
-{
- struct ahc_cmd *acmd;
- u_long done_flags;
- int with_errors;
-
- with_errors = 0;
- ahc_done_lock(ahc, &done_flags);
- while ((acmd = TAILQ_FIRST(&ahc->platform_data->completeq)) != NULL) {
- Scsi_Cmnd *cmd;
-
- if (with_errors > AHC_LINUX_MAX_RETURNED_ERRORS) {
- /*
- * Linux uses stack recursion to requeue
- * commands that need to be retried. Avoid
- * blowing out the stack by "spoon feeding"
- * commands that completed with error back
- * the operating system in case they are going
- * to be retried. "ick"
- */
- ahc_schedule_completeq(ahc);
- break;
- }
- TAILQ_REMOVE(&ahc->platform_data->completeq,
- acmd, acmd_links.tqe);
- cmd = &acmd_scsi_cmd(acmd);
- cmd->host_scribble = NULL;
- if (ahc_cmd_get_transaction_status(cmd) != DID_OK
- || (cmd->result & 0xFF) != SCSI_STATUS_OK)
- with_errors++;
-
- cmd->scsi_done(cmd);
- }
- ahc_done_unlock(ahc, &done_flags);
- return (acmd);
-}
-
-static __inline void
-ahc_linux_check_device_queue(struct ahc_softc *ahc,
- struct ahc_linux_device *dev)
-{
- if ((dev->flags & AHC_DEV_FREEZE_TIL_EMPTY) != 0
- && dev->active == 0) {
- dev->flags &= ~AHC_DEV_FREEZE_TIL_EMPTY;
- dev->qfrozen--;
- }
-
- if (TAILQ_FIRST(&dev->busyq) == NULL
- || dev->openings == 0 || dev->qfrozen != 0)
- return;
-
- ahc_linux_run_device_queue(ahc, dev);
-}
-
-static __inline struct ahc_linux_device *
-ahc_linux_next_device_to_run(struct ahc_softc *ahc)
-{
-
- if ((ahc->flags & AHC_RESOURCE_SHORTAGE) != 0
- || (ahc->platform_data->qfrozen != 0))
- return (NULL);
- return (TAILQ_FIRST(&ahc->platform_data->device_runq));
-}
-
-static __inline void
-ahc_linux_run_device_queues(struct ahc_softc *ahc)
-{
- struct ahc_linux_device *dev;
-
- while ((dev = ahc_linux_next_device_to_run(ahc)) != NULL) {
- TAILQ_REMOVE(&ahc->platform_data->device_runq, dev, links);
- dev->flags &= ~AHC_DEV_ON_RUN_LIST;
- ahc_linux_check_device_queue(ahc, dev);
- }
+ return dev;
}
static __inline void
ahc_linux_unmap_scb(struct ahc_softc *ahc, struct scb *scb)
{
- Scsi_Cmnd *cmd;
+ struct scsi_cmnd *cmd;
cmd = scb->io_ctx;
ahc_sync_sglist(ahc, scb, BUS_DMASYNC_POSTWRITE);
@@ -650,109 +523,15 @@
return (consumed);
}
-/************************ Host template entry points *************************/
-static int ahc_linux_detect(Scsi_Host_Template *);
-static int ahc_linux_queue(Scsi_Cmnd *, void (*)(Scsi_Cmnd *));
-static const char *ahc_linux_info(struct Scsi_Host *);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-static int ahc_linux_slave_alloc(Scsi_Device *);
-static int ahc_linux_slave_configure(Scsi_Device *);
-static void ahc_linux_slave_destroy(Scsi_Device *);
-#if defined(__i386__)
-static int ahc_linux_biosparam(struct scsi_device*,
- struct block_device*,
- sector_t, int[]);
-#endif
-#else
-static int ahc_linux_release(struct Scsi_Host *);
-static void ahc_linux_select_queue_depth(struct Scsi_Host *host,
- Scsi_Device *scsi_devs);
-#if defined(__i386__)
-static int ahc_linux_biosparam(Disk *, kdev_t, int[]);
-#endif
-#endif
-static int ahc_linux_bus_reset(Scsi_Cmnd *);
-static int ahc_linux_dev_reset(Scsi_Cmnd *);
-static int ahc_linux_abort(Scsi_Cmnd *);
-
-/*
- * Calculate a safe value for AHC_NSEG (as expressed through ahc_linux_nseg).
- *
- * In pre-2.5.X...
- * The midlayer allocates an S/G array dynamically when a command is issued
- * using SCSI malloc. This array, which is in an OS dependent format that
- * must later be copied to our private S/G list, is sized to house just the
- * number of segments needed for the current transfer. Since the code that
- * sizes the SCSI malloc pool does not take into consideration fragmentation
- * of the pool, executing transactions numbering just a fraction of our
- * concurrent transaction limit with list lengths aproaching AHC_NSEG will
- * quickly depleat the SCSI malloc pool of usable space. Unfortunately, the
- * mid-layer does not properly handle this scsi malloc failures for the S/G
- * array and the result can be a lockup of the I/O subsystem. We try to size
- * our S/G list so that it satisfies our drivers allocation requirements in
- * addition to avoiding fragmentation of the SCSI malloc pool.
- */
-static void
-ahc_linux_size_nseg(void)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- u_int cur_size;
- u_int best_size;
-
- /*
- * The SCSI allocator rounds to the nearest 512 bytes
- * an cannot allocate across a page boundary. Our algorithm
- * is to start at 1K of scsi malloc space per-command and
- * loop through all factors of the PAGE_SIZE and pick the best.
- */
- best_size = 0;
- for (cur_size = 1024; cur_size <= PAGE_SIZE; cur_size *= 2) {
- u_int nseg;
-
- nseg = cur_size / sizeof(struct scatterlist);
- if (nseg < AHC_LINUX_MIN_NSEG)
- continue;
-
- if (best_size == 0) {
- best_size = cur_size;
- ahc_linux_nseg = nseg;
- } else {
- u_int best_rem;
- u_int cur_rem;
-
- /*
- * Compare the traits of the current "best_size"
- * with the current size to determine if the
- * current size is a better size.
- */
- best_rem = best_size % sizeof(struct scatterlist);
- cur_rem = cur_size % sizeof(struct scatterlist);
- if (cur_rem < best_rem) {
- best_size = cur_size;
- ahc_linux_nseg = nseg;
- }
- }
- }
-#endif
-}
-
/*
* Try to detect an Adaptec 7XXX controller.
*/
static int
-ahc_linux_detect(Scsi_Host_Template *template)
+ahc_linux_detect(struct scsi_host_template *template)
{
struct ahc_softc *ahc;
int found = 0;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- /*
- * It is a bug that the upper layer takes
- * this lock just prior to calling us.
- */
- spin_unlock_irq(&io_request_lock);
-#endif
-
/*
* Sanity checking of Linux SCSI data structures so
* that some of our hacks^H^H^H^H^Hassumptions aren't
@@ -764,7 +543,6 @@
printf("ahc_linux_detect: Unable to attach\n");
return (0);
}
- ahc_linux_size_nseg();
/*
* If we've been passed any parameters, process them now.
*/
@@ -793,48 +571,11 @@
found++;
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- spin_lock_irq(&io_request_lock);
-#endif
aic7xxx_detect_complete++;
return (found);
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-/*
- * Free the passed in Scsi_Host memory structures prior to unloading the
- * module.
- */
-int
-ahc_linux_release(struct Scsi_Host * host)
-{
- struct ahc_softc *ahc;
- u_long l;
-
- ahc_list_lock(&l);
- if (host != NULL) {
-
- /*
- * We should be able to just perform
- * the free directly, but check our
- * list for extra sanity.
- */
- ahc = ahc_find_softc(*(struct ahc_softc **)host->hostdata);
- if (ahc != NULL) {
- u_long s;
-
- ahc_lock(ahc, &s);
- ahc_intr_enable(ahc, FALSE);
- ahc_unlock(ahc, &s);
- ahc_free(ahc);
- }
- }
- ahc_list_unlock(&l);
- return (0);
-}
-#endif
-
/*
* Return a string describing the driver.
*/
@@ -867,11 +608,10 @@
* Queue an SCB to the controller.
*/
static int
-ahc_linux_queue(Scsi_Cmnd * cmd, void (*scsi_done) (Scsi_Cmnd *))
+ahc_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
{
struct ahc_softc *ahc;
struct ahc_linux_device *dev;
- u_long flags;
ahc = *(struct ahc_softc **)cmd->device->host->hostdata;
@@ -880,205 +620,152 @@
*/
cmd->scsi_done = scsi_done;
- ahc_midlayer_entrypoint_lock(ahc, &flags);
-
/*
* Close the race of a command that was in the process of
* being queued to us just as our simq was frozen. Let
* DV commands through so long as we are only frozen to
* perform DV.
*/
- if (ahc->platform_data->qfrozen != 0) {
+ if (ahc->platform_data->qfrozen != 0)
+ return SCSI_MLQUEUE_HOST_BUSY;
- ahc_cmd_set_transaction_status(cmd, CAM_REQUEUE_REQ);
- ahc_linux_queue_cmd_complete(ahc, cmd);
- ahc_schedule_completeq(ahc);
- ahc_midlayer_entrypoint_unlock(ahc, &flags);
- return (0);
- }
dev = ahc_linux_get_device(ahc, cmd->device->channel, cmd->device->id,
- cmd->device->lun, /*alloc*/TRUE);
- if (dev == NULL) {
- ahc_cmd_set_transaction_status(cmd, CAM_RESRC_UNAVAIL);
- ahc_linux_queue_cmd_complete(ahc, cmd);
- ahc_schedule_completeq(ahc);
- ahc_midlayer_entrypoint_unlock(ahc, &flags);
- printf("%s: aic7xxx_linux_queue - Unable to allocate device!\n",
- ahc_name(ahc));
- return (0);
- }
+ cmd->device->lun);
+ BUG_ON(dev == NULL);
+
cmd->result = CAM_REQ_INPROG << 16;
- TAILQ_INSERT_TAIL(&dev->busyq, (struct ahc_cmd *)cmd, acmd_links.tqe);
- if ((dev->flags & AHC_DEV_ON_RUN_LIST) == 0) {
- TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq, dev, links);
- dev->flags |= AHC_DEV_ON_RUN_LIST;
- ahc_linux_run_device_queues(ahc);
- }
- ahc_midlayer_entrypoint_unlock(ahc, &flags);
- return (0);
+
+ return ahc_linux_run_command(ahc, dev, cmd);
}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
static int
-ahc_linux_slave_alloc(Scsi_Device *device)
+ahc_linux_slave_alloc(struct scsi_device *device)
{
struct ahc_softc *ahc;
+ struct ahc_linux_target *targ;
+ struct scsi_target *starget = device->sdev_target;
+ struct ahc_linux_device *dev;
+ unsigned int target_offset;
+ unsigned long flags;
+ int retval = -ENOMEM;
+
+ target_offset = starget->id;
+ if (starget->channel != 0)
+ target_offset += 8;
ahc = *((struct ahc_softc **)device->host->hostdata);
if (bootverbose)
printf("%s: Slave Alloc %d\n", ahc_name(ahc), device->id);
- return (0);
+ ahc_lock(ahc, &flags);
+ targ = ahc->platform_data->targets[target_offset];
+ if (targ == NULL) {
+ struct seeprom_config *sc;
+
+ targ = ahc_linux_alloc_target(ahc, starget->channel,
+ starget->id);
+ sc = ahc->seep_config;
+ if (targ == NULL)
+ goto out;
+
+ if (sc) {
+ unsigned short scsirate;
+ struct ahc_devinfo devinfo;
+ struct ahc_initiator_tinfo *tinfo;
+ struct ahc_tmode_tstate *tstate;
+ char channel = starget->channel + 'A';
+ unsigned int our_id = ahc->our_id;
+
+ if (starget->channel)
+ our_id = ahc->our_id_b;
+
+ if ((ahc->features & AHC_ULTRA2) != 0) {
+ scsirate = sc->device_flags[target_offset] & CFXFER;
+ } else {
+ scsirate = (sc->device_flags[target_offset] & CFXFER) << 4;
+ if (sc->device_flags[target_offset] & CFSYNCH)
+ scsirate |= SOFS;
+ }
+ if (sc->device_flags[target_offset] & CFWIDEB) {
+ scsirate |= WIDEXFER;
+ spi_max_width(starget) = 1;
+ } else
+ spi_max_width(starget) = 0;
+ spi_min_period(starget) =
+ ahc_find_period(ahc, scsirate, AHC_SYNCRATE_DT);
+ tinfo = ahc_fetch_transinfo(ahc, channel, ahc->our_id,
+ targ->target, &tstate);
+ ahc_compile_devinfo(&devinfo, our_id, targ->target,
+ CAM_LUN_WILDCARD, channel,
+ ROLE_INITIATOR);
+ ahc_set_syncrate(ahc, &devinfo, NULL, 0, 0, 0,
+ AHC_TRANS_GOAL, /*paused*/FALSE);
+ ahc_set_width(ahc, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
+ AHC_TRANS_GOAL, /*paused*/FALSE);
+ }
+
+ }
+ dev = targ->devices[device->lun];
+ if (dev == NULL) {
+ dev = ahc_linux_alloc_device(ahc, targ, device->lun);
+ if (dev == NULL)
+ goto out;
+ }
+ retval = 0;
+
+ out:
+ ahc_unlock(ahc, &flags);
+ return retval;
}
static int
-ahc_linux_slave_configure(Scsi_Device *device)
+ahc_linux_slave_configure(struct scsi_device *device)
{
struct ahc_softc *ahc;
struct ahc_linux_device *dev;
- u_long flags;
ahc = *((struct ahc_softc **)device->host->hostdata);
+
if (bootverbose)
printf("%s: Slave Configure %d\n", ahc_name(ahc), device->id);
- ahc_midlayer_entrypoint_lock(ahc, &flags);
- /*
- * Since Linux has attached to the device, configure
- * it so we don't free and allocate the device
- * structure on every command.
- */
- dev = ahc_linux_get_device(ahc, device->channel,
- device->id, device->lun,
- /*alloc*/TRUE);
- if (dev != NULL) {
- dev->flags &= ~AHC_DEV_UNCONFIGURED;
- dev->scsi_device = device;
- ahc_linux_device_queue_depth(ahc, dev);
- }
- ahc_midlayer_entrypoint_unlock(ahc, &flags);
+
+ dev = ahc_linux_get_device(ahc, device->channel, device->id,
+ device->lun);
+ dev->scsi_device = device;
+ ahc_linux_device_queue_depth(ahc, dev);
/* Initial Domain Validation */
if (!spi_initial_dv(device->sdev_target))
spi_dv_device(device);
- return (0);
+ return 0;
}
static void
-ahc_linux_slave_destroy(Scsi_Device *device)
+ahc_linux_slave_destroy(struct scsi_device *device)
{
struct ahc_softc *ahc;
struct ahc_linux_device *dev;
- u_long flags;
ahc = *((struct ahc_softc **)device->host->hostdata);
if (bootverbose)
printf("%s: Slave Destroy %d\n", ahc_name(ahc), device->id);
- ahc_midlayer_entrypoint_lock(ahc, &flags);
dev = ahc_linux_get_device(ahc, device->channel,
- device->id, device->lun,
- /*alloc*/FALSE);
- /*
- * Filter out "silly" deletions of real devices by only
- * deleting devices that have had slave_configure()
- * called on them. All other devices that have not
- * been configured will automatically be deleted by
- * the refcounting process.
- */
- if (dev != NULL
- && (dev->flags & AHC_DEV_SLAVE_CONFIGURED) != 0) {
- dev->flags |= AHC_DEV_UNCONFIGURED;
- if (TAILQ_EMPTY(&dev->busyq)
- && dev->active == 0
- && (dev->flags & AHC_DEV_TIMER_ACTIVE) == 0)
- ahc_linux_free_device(ahc, dev);
- }
- ahc_midlayer_entrypoint_unlock(ahc, &flags);
+ device->id, device->lun);
+
+ BUG_ON(dev->active);
+
+ ahc_linux_free_device(ahc, dev);
}
-#else
-/*
- * Sets the queue depth for each SCSI device hanging
- * off the input host adapter.
- */
-static void
-ahc_linux_select_queue_depth(struct Scsi_Host *host, Scsi_Device *scsi_devs)
-{
- Scsi_Device *device;
- Scsi_Device *ldev;
- struct ahc_softc *ahc;
- u_long flags;
-
- ahc = *((struct ahc_softc **)host->hostdata);
- ahc_lock(ahc, &flags);
- for (device = scsi_devs; device != NULL; device = device->next) {
-
- /*
- * Watch out for duplicate devices. This works around
- * some quirks in how the SCSI scanning code does its
- * device management.
- */
- for (ldev = scsi_devs; ldev != device; ldev = ldev->next) {
- if (ldev->host == device->host
- && ldev->channel == device->channel
- && ldev->id == device->id
- && ldev->lun == device->lun)
- break;
- }
- /* Skip duplicate. */
- if (ldev != device)
- continue;
-
- if (device->host == host) {
- struct ahc_linux_device *dev;
-
- /*
- * Since Linux has attached to the device, configure
- * it so we don't free and allocate the device
- * structure on every command.
- */
- dev = ahc_linux_get_device(ahc, device->channel,
- device->id, device->lun,
- /*alloc*/TRUE);
- if (dev != NULL) {
- dev->flags &= ~AHC_DEV_UNCONFIGURED;
- dev->scsi_device = device;
- ahc_linux_device_queue_depth(ahc, dev);
- device->queue_depth = dev->openings
- + dev->active;
- if ((dev->flags & (AHC_DEV_Q_BASIC
- | AHC_DEV_Q_TAGGED)) == 0) {
- /*
- * We allow the OS to queue 2 untagged
- * transactions to us at any time even
- * though we can only execute them
- * serially on the controller/device.
- * This should remove some latency.
- */
- device->queue_depth = 2;
- }
- }
- }
- }
- ahc_unlock(ahc, &flags);
-}
-#endif
#if defined(__i386__)
/*
* Return the disk geometry for the given SCSI device.
*/
static int
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
ahc_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int geom[])
{
uint8_t *bh;
-#else
-ahc_linux_biosparam(Disk *disk, kdev_t dev, int geom[])
-{
- struct scsi_device *sdev = disk->device;
- u_long capacity = disk->capacity;
- struct buffer_head *bh;
-#endif
int heads;
int sectors;
int cylinders;
@@ -1090,22 +777,11 @@
ahc = *((struct ahc_softc **)sdev->host->hostdata);
channel = sdev->channel;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
bh = scsi_bios_ptable(bdev);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,17)
- bh = bread(MKDEV(MAJOR(dev), MINOR(dev) & ~0xf), 0, block_size(dev));
-#else
- bh = bread(MKDEV(MAJOR(dev), MINOR(dev) & ~0xf), 0, 1024);
-#endif
-
if (bh) {
ret = scsi_partsize(bh, capacity,
&geom[2], &geom[0], &geom[1]);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
kfree(bh);
-#else
- brelse(bh);
-#endif
if (ret != -1)
return (ret);
}
@@ -1135,7 +811,7 @@
* Abort the current SCSI command(s).
*/
static int
-ahc_linux_abort(Scsi_Cmnd *cmd)
+ahc_linux_abort(struct scsi_cmnd *cmd)
{
int error;
@@ -1149,7 +825,7 @@
* Attempt to send a target reset message to the device that timed out.
*/
static int
-ahc_linux_dev_reset(Scsi_Cmnd *cmd)
+ahc_linux_dev_reset(struct scsi_cmnd *cmd)
{
int error;
@@ -1163,18 +839,14 @@
* Reset the SCSI bus.
*/
static int
-ahc_linux_bus_reset(Scsi_Cmnd *cmd)
+ahc_linux_bus_reset(struct scsi_cmnd *cmd)
{
struct ahc_softc *ahc;
- u_long s;
int found;
ahc = *(struct ahc_softc **)cmd->device->host->hostdata;
- ahc_midlayer_entrypoint_lock(ahc, &s);
found = ahc_reset_channel(ahc, cmd->device->channel + 'A',
/*initiate reset*/TRUE);
- ahc_linux_run_complete_queue(ahc);
- ahc_midlayer_entrypoint_unlock(ahc, &s);
if (bootverbose)
printf("%s: SCSI bus reset delivered. "
@@ -1183,7 +855,7 @@
return SUCCESS;
}
-Scsi_Host_Template aic7xxx_driver_template = {
+struct scsi_host_template aic7xxx_driver_template = {
.module = THIS_MODULE,
.name = "aic7xxx",
.proc_info = ahc_linux_proc_info,
@@ -1206,33 +878,6 @@
/**************************** Tasklet Handler *********************************/
-/*
- * In 2.4.X and above, this routine is called from a tasklet,
- * so we must re-acquire our lock prior to executing this code.
- * In all prior kernels, ahc_schedule_runq() calls this routine
- * directly and ahc_schedule_runq() is called with our lock held.
- */
-static void
-ahc_runq_tasklet(unsigned long data)
-{
- struct ahc_softc* ahc;
- struct ahc_linux_device *dev;
- u_long flags;
-
- ahc = (struct ahc_softc *)data;
- ahc_lock(ahc, &flags);
- while ((dev = ahc_linux_next_device_to_run(ahc)) != NULL) {
-
- TAILQ_REMOVE(&ahc->platform_data->device_runq, dev, links);
- dev->flags &= ~AHC_DEV_ON_RUN_LIST;
- ahc_linux_check_device_queue(ahc, dev);
- /* Yeild to our interrupt handler */
- ahc_unlock(ahc, &flags);
- ahc_lock(ahc, &flags);
- }
- ahc_unlock(ahc, &flags);
-}
-
/******************************** Macros **************************************/
#define BUILD_SCSIID(ahc, cmd) \
((((cmd)->device->id << TID_SHIFT) & TID) \
@@ -1278,37 +923,11 @@
ahc_dmamem_alloc(struct ahc_softc *ahc, bus_dma_tag_t dmat, void** vaddr,
int flags, bus_dmamap_t *mapp)
{
- bus_dmamap_t map;
-
- map = malloc(sizeof(*map), M_DEVBUF, M_NOWAIT);
- if (map == NULL)
- return (ENOMEM);
- /*
- * Although we can dma data above 4GB, our
- * "consistent" memory is below 4GB for
- * space efficiency reasons (only need a 4byte
- * address). For this reason, we have to reset
- * our dma mask when doing allocations.
- */
- if (ahc->dev_softc != NULL)
- if (pci_set_dma_mask(ahc->dev_softc, 0xFFFFFFFF)) {
- printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n");
- kfree(map);
- return (ENODEV);
- }
*vaddr = pci_alloc_consistent(ahc->dev_softc,
- dmat->maxsize, &map->bus_addr);
- if (ahc->dev_softc != NULL)
- if (pci_set_dma_mask(ahc->dev_softc,
- ahc->platform_data->hw_dma_mask)) {
- printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n");
- kfree(map);
- return (ENODEV);
- }
+ dmat->maxsize, mapp);
if (*vaddr == NULL)
- return (ENOMEM);
- *mapp = map;
- return(0);
+ return ENOMEM;
+ return 0;
}
void
@@ -1316,7 +935,7 @@
void* vaddr, bus_dmamap_t map)
{
pci_free_consistent(ahc->dev_softc, dmat->maxsize,
- vaddr, map->bus_addr);
+ vaddr, map);
}
int
@@ -1330,7 +949,7 @@
*/
bus_dma_segment_t stack_sg;
- stack_sg.ds_addr = map->bus_addr;
+ stack_sg.ds_addr = map;
stack_sg.ds_len = dmat->maxsize;
cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0);
return (0);
@@ -1339,12 +958,6 @@
void
ahc_dmamap_destroy(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map)
{
- /*
- * The map may is NULL in our < 2.3.X implementation.
- * Now it's 2.6.5, but just in case...
- */
- BUG_ON(map == NULL);
- free(map, M_DEVBUF);
}
int
@@ -1550,7 +1163,7 @@
uint32_t aic7xxx_verbose;
int
-ahc_linux_register_host(struct ahc_softc *ahc, Scsi_Host_Template *template)
+ahc_linux_register_host(struct ahc_softc *ahc, struct scsi_host_template *template)
{
char buf[80];
struct Scsi_Host *host;
@@ -1564,11 +1177,7 @@
*((struct ahc_softc **)host->hostdata) = ahc;
ahc_lock(ahc, &s);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
scsi_assign_lock(host, &ahc->platform_data->spin_lock);
-#elif AHC_SCSI_HAS_HOST_LOCK != 0
- host->lock = &ahc->platform_data->spin_lock;
-#endif
ahc->platform_data->host = host;
host->can_queue = AHC_MAX_QUEUE;
host->cmd_per_lun = 2;
@@ -1587,19 +1196,14 @@
ahc_set_name(ahc, new_name);
}
host->unique_id = ahc->unit;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- scsi_set_pci_device(host, ahc->dev_softc);
-#endif
ahc_linux_initialize_scsi_bus(ahc);
ahc_intr_enable(ahc, TRUE);
ahc_unlock(ahc, &s);
host->transportt = ahc_linux_transport_template;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
scsi_add_host(host, (ahc->dev_softc ? &ahc->dev_softc->dev : NULL)); /* XXX handle failure */
scsi_scan_host(host);
-#endif
return (0);
}
@@ -1717,19 +1321,9 @@
if (ahc->platform_data == NULL)
return (ENOMEM);
memset(ahc->platform_data, 0, sizeof(struct ahc_platform_data));
- TAILQ_INIT(&ahc->platform_data->completeq);
- TAILQ_INIT(&ahc->platform_data->device_runq);
ahc->platform_data->irq = AHC_LINUX_NOIRQ;
- ahc->platform_data->hw_dma_mask = 0xFFFFFFFF;
ahc_lockinit(ahc);
- ahc_done_lockinit(ahc);
- init_timer(&ahc->platform_data->completeq_timer);
- ahc->platform_data->completeq_timer.data = (u_long)ahc;
- ahc->platform_data->completeq_timer.function =
- (ahc_linux_callback_t *)ahc_linux_thread_run_complete_queue;
init_MUTEX_LOCKED(&ahc->platform_data->eh_sem);
- tasklet_init(&ahc->platform_data->runq_tasklet, ahc_runq_tasklet,
- (unsigned long)ahc);
ahc->seltime = (aic7xxx_seltime & 0x3) << 4;
ahc->seltime_b = (aic7xxx_seltime & 0x3) << 4;
if (aic7xxx_pci_parity == 0)
@@ -1746,12 +1340,8 @@
int i, j;
if (ahc->platform_data != NULL) {
- del_timer_sync(&ahc->platform_data->completeq_timer);
- tasklet_kill(&ahc->platform_data->runq_tasklet);
if (ahc->platform_data->host != NULL) {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
scsi_remove_host(ahc->platform_data->host);
-#endif
scsi_host_put(ahc->platform_data->host);
}
@@ -1787,16 +1377,7 @@
release_mem_region(ahc->platform_data->mem_busaddr,
0x1000);
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- /*
- * In 2.4 we detach from the scsi midlayer before the PCI
- * layer invokes our remove callback. No per-instance
- * detach is provided, so we must reach inside the PCI
- * subsystem's internals and detach our driver manually.
- */
- if (ahc->dev_softc != NULL)
- ahc->dev_softc->driver = NULL;
-#endif
+
free(ahc->platform_data, M_DEVBUF);
}
}
@@ -1820,7 +1401,7 @@
dev = ahc_linux_get_device(ahc, devinfo->channel - 'A',
devinfo->target,
- devinfo->lun, /*alloc*/FALSE);
+ devinfo->lun);
if (dev == NULL)
return;
was_queuing = dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED);
@@ -1873,7 +1454,6 @@
dev->maxtags = 0;
dev->openings = 1 - dev->active;
}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
if (dev->scsi_device != NULL) {
switch ((dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED))) {
case AHC_DEV_Q_BASIC:
@@ -1899,90 +1479,13 @@
break;
}
}
-#endif
}
int
ahc_platform_abort_scbs(struct ahc_softc *ahc, int target, char channel,
int lun, u_int tag, role_t role, uint32_t status)
{
- int chan;
- int maxchan;
- int targ;
- int maxtarg;
- int clun;
- int maxlun;
- int count;
-
- if (tag != SCB_LIST_NULL)
- return (0);
-
- chan = 0;
- if (channel != ALL_CHANNELS) {
- chan = channel - 'A';
- maxchan = chan + 1;
- } else {
- maxchan = (ahc->features & AHC_TWIN) ? 2 : 1;
- }
- targ = 0;
- if (target != CAM_TARGET_WILDCARD) {
- targ = target;
- maxtarg = targ + 1;
- } else {
- maxtarg = (ahc->features & AHC_WIDE) ? 16 : 8;
- }
- clun = 0;
- if (lun != CAM_LUN_WILDCARD) {
- clun = lun;
- maxlun = clun + 1;
- } else {
- maxlun = AHC_NUM_LUNS;
- }
-
- count = 0;
- for (; chan < maxchan; chan++) {
-
- for (; targ < maxtarg; targ++) {
-
- for (; clun < maxlun; clun++) {
- struct ahc_linux_device *dev;
- struct ahc_busyq *busyq;
- struct ahc_cmd *acmd;
-
- dev = ahc_linux_get_device(ahc, chan,
- targ, clun,
- /*alloc*/FALSE);
- if (dev == NULL)
- continue;
-
- busyq = &dev->busyq;
- while ((acmd = TAILQ_FIRST(busyq)) != NULL) {
- Scsi_Cmnd *cmd;
-
- cmd = &acmd_scsi_cmd(acmd);
- TAILQ_REMOVE(busyq, acmd,
- acmd_links.tqe);
- count++;
- cmd->result = status << 16;
- ahc_linux_queue_cmd_complete(ahc, cmd);
- }
- }
- }
- }
-
- return (count);
-}
-
-static void
-ahc_linux_thread_run_complete_queue(struct ahc_softc *ahc)
-{
- u_long flags;
-
- ahc_lock(ahc, &flags);
- del_timer(&ahc->platform_data->completeq_timer);
- ahc->platform_data->flags &= ~AHC_RUN_CMPLT_Q_TIMER;
- ahc_linux_run_complete_queue(ahc);
- ahc_unlock(ahc, &flags);
+ return 0;
}
static u_int
@@ -2045,213 +1548,200 @@
}
}
-static void
-ahc_linux_run_device_queue(struct ahc_softc *ahc, struct ahc_linux_device *dev)
+static int
+ahc_linux_run_command(struct ahc_softc *ahc, struct ahc_linux_device *dev,
+ struct scsi_cmnd *cmd)
{
- struct ahc_cmd *acmd;
- struct scsi_cmnd *cmd;
struct scb *scb;
struct hardware_scb *hscb;
struct ahc_initiator_tinfo *tinfo;
struct ahc_tmode_tstate *tstate;
uint16_t mask;
+ struct scb_tailq *untagged_q = NULL;
- if ((dev->flags & AHC_DEV_ON_RUN_LIST) != 0)
- panic("running device on run list");
+ /*
+ * Schedule us to run later. The only reason we are not
+ * running is because the whole controller Q is frozen.
+ */
+ if (ahc->platform_data->qfrozen != 0)
+ return SCSI_MLQUEUE_HOST_BUSY;
- while ((acmd = TAILQ_FIRST(&dev->busyq)) != NULL
- && dev->openings > 0 && dev->qfrozen == 0) {
+ /*
+ * We only allow one untagged transaction
+ * per target in the initiator role unless
+ * we are storing a full busy target *lun*
+ * table in SCB space.
+ */
+ if (!blk_rq_tagged(cmd->request)
+ && (ahc->features & AHC_SCB_BTT) == 0) {
+ int target_offset;
- /*
- * Schedule us to run later. The only reason we are not
- * running is because the whole controller Q is frozen.
- */
- if (ahc->platform_data->qfrozen != 0) {
- TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq,
- dev, links);
- dev->flags |= AHC_DEV_ON_RUN_LIST;
- return;
- }
- /*
- * Get an scb to use.
- */
- if ((scb = ahc_get_scb(ahc)) == NULL) {
- TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq,
- dev, links);
- dev->flags |= AHC_DEV_ON_RUN_LIST;
- ahc->flags |= AHC_RESOURCE_SHORTAGE;
- return;
- }
- TAILQ_REMOVE(&dev->busyq, acmd, acmd_links.tqe);
- cmd = &acmd_scsi_cmd(acmd);
- scb->io_ctx = cmd;
- scb->platform_data->dev = dev;
- hscb = scb->hscb;
- cmd->host_scribble = (char *)scb;
-
- /*
- * Fill out basics of the HSCB.
- */
- hscb->control = 0;
- hscb->scsiid = BUILD_SCSIID(ahc, cmd);
- hscb->lun = cmd->device->lun;
- mask = SCB_GET_TARGET_MASK(ahc, scb);
- tinfo = ahc_fetch_transinfo(ahc, SCB_GET_CHANNEL(ahc, scb),
- SCB_GET_OUR_ID(scb),
- SCB_GET_TARGET(ahc, scb), &tstate);
- hscb->scsirate = tinfo->scsirate;
- hscb->scsioffset = tinfo->curr.offset;
- if ((tstate->ultraenb & mask) != 0)
- hscb->control |= ULTRAENB;
-
- if ((ahc->user_discenable & mask) != 0)
- hscb->control |= DISCENB;
-
- if ((tstate->auto_negotiate & mask) != 0) {
- scb->flags |= SCB_AUTO_NEGOTIATE;
- scb->hscb->control |= MK_MESSAGE;
- }
-
- if ((dev->flags & (AHC_DEV_Q_TAGGED|AHC_DEV_Q_BASIC)) != 0) {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
- int msg_bytes;
- uint8_t tag_msgs[2];
-
- msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs);
- if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) {
- hscb->control |= tag_msgs[0];
- if (tag_msgs[0] == MSG_ORDERED_TASK)
- dev->commands_since_idle_or_otag = 0;
- } else
-#endif
- if (dev->commands_since_idle_or_otag == AHC_OTAG_THRESH
- && (dev->flags & AHC_DEV_Q_TAGGED) != 0) {
- hscb->control |= MSG_ORDERED_TASK;
- dev->commands_since_idle_or_otag = 0;
- } else {
- hscb->control |= MSG_SIMPLE_TASK;
- }
- }
-
- hscb->cdb_len = cmd->cmd_len;
- if (hscb->cdb_len <= 12) {
- memcpy(hscb->shared_data.cdb, cmd->cmnd, hscb->cdb_len);
- } else {
- memcpy(hscb->cdb32, cmd->cmnd, hscb->cdb_len);
- scb->flags |= SCB_CDB32_PTR;
- }
-
- scb->platform_data->xfer_len = 0;
- ahc_set_residual(scb, 0);
- ahc_set_sense_residual(scb, 0);
- scb->sg_count = 0;
- if (cmd->use_sg != 0) {
- struct ahc_dma_seg *sg;
- struct scatterlist *cur_seg;
- struct scatterlist *end_seg;
- int nseg;
-
- cur_seg = (struct scatterlist *)cmd->request_buffer;
- nseg = pci_map_sg(ahc->dev_softc, cur_seg, cmd->use_sg,
- cmd->sc_data_direction);
- end_seg = cur_seg + nseg;
- /* Copy the segments into the SG list. */
- sg = scb->sg_list;
- /*
- * The sg_count may be larger than nseg if
- * a transfer crosses a 32bit page.
- */
- while (cur_seg < end_seg) {
- dma_addr_t addr;
- bus_size_t len;
- int consumed;
-
- addr = sg_dma_address(cur_seg);
- len = sg_dma_len(cur_seg);
- consumed = ahc_linux_map_seg(ahc, scb,
- sg, addr, len);
- sg += consumed;
- scb->sg_count += consumed;
- cur_seg++;
- }
- sg--;
- sg->len |= ahc_htole32(AHC_DMA_LAST_SEG);
-
- /*
- * Reset the sg list pointer.
- */
- scb->hscb->sgptr =
- ahc_htole32(scb->sg_list_phys | SG_FULL_RESID);
-
- /*
- * Copy the first SG into the "current"
- * data pointer area.
- */
- scb->hscb->dataptr = scb->sg_list->addr;
- scb->hscb->datacnt = scb->sg_list->len;
- } else if (cmd->request_bufflen != 0) {
- struct ahc_dma_seg *sg;
- dma_addr_t addr;
-
- sg = scb->sg_list;
- addr = pci_map_single(ahc->dev_softc,
- cmd->request_buffer,
- cmd->request_bufflen,
- cmd->sc_data_direction);
- scb->platform_data->buf_busaddr = addr;
- scb->sg_count = ahc_linux_map_seg(ahc, scb,
- sg, addr,
- cmd->request_bufflen);
- sg->len |= ahc_htole32(AHC_DMA_LAST_SEG);
-
- /*
- * Reset the sg list pointer.
- */
- scb->hscb->sgptr =
- ahc_htole32(scb->sg_list_phys | SG_FULL_RESID);
-
- /*
- * Copy the first SG into the "current"
- * data pointer area.
- */
- scb->hscb->dataptr = sg->addr;
- scb->hscb->datacnt = sg->len;
- } else {
- scb->hscb->sgptr = ahc_htole32(SG_LIST_NULL);
- scb->hscb->dataptr = 0;
- scb->hscb->datacnt = 0;
- scb->sg_count = 0;
- }
-
- ahc_sync_sglist(ahc, scb, BUS_DMASYNC_PREWRITE);
- LIST_INSERT_HEAD(&ahc->pending_scbs, scb, pending_links);
- dev->openings--;
- dev->active++;
- dev->commands_issued++;
- if ((dev->flags & AHC_DEV_PERIODIC_OTAG) != 0)
- dev->commands_since_idle_or_otag++;
-
- /*
- * We only allow one untagged transaction
- * per target in the initiator role unless
- * we are storing a full busy target *lun*
- * table in SCB space.
- */
- if ((scb->hscb->control & (TARGET_SCB|TAG_ENB)) == 0
- && (ahc->features & AHC_SCB_BTT) == 0) {
- struct scb_tailq *untagged_q;
- int target_offset;
-
- target_offset = SCB_GET_TARGET_OFFSET(ahc, scb);
- untagged_q = &(ahc->untagged_queues[target_offset]);
- TAILQ_INSERT_TAIL(untagged_q, scb, links.tqe);
- scb->flags |= SCB_UNTAGGEDQ;
- if (TAILQ_FIRST(untagged_q) != scb)
- continue;
- }
- scb->flags |= SCB_ACTIVE;
- ahc_queue_scb(ahc, scb);
+ target_offset = cmd->device->id + cmd->device->channel * 8;
+ untagged_q = &(ahc->untagged_queues[target_offset]);
+ if (!TAILQ_EMPTY(untagged_q))
+ /* if we're already executing an untagged command
+ * we're busy to another */
+ return SCSI_MLQUEUE_DEVICE_BUSY;
}
+
+ /*
+ * Get an scb to use.
+ */
+ if ((scb = ahc_get_scb(ahc)) == NULL) {
+ ahc->flags |= AHC_RESOURCE_SHORTAGE;
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
+ scb->io_ctx = cmd;
+ scb->platform_data->dev = dev;
+ hscb = scb->hscb;
+ cmd->host_scribble = (char *)scb;
+
+ /*
+ * Fill out basics of the HSCB.
+ */
+ hscb->control = 0;
+ hscb->scsiid = BUILD_SCSIID(ahc, cmd);
+ hscb->lun = cmd->device->lun;
+ mask = SCB_GET_TARGET_MASK(ahc, scb);
+ tinfo = ahc_fetch_transinfo(ahc, SCB_GET_CHANNEL(ahc, scb),
+ SCB_GET_OUR_ID(scb),
+ SCB_GET_TARGET(ahc, scb), &tstate);
+ hscb->scsirate = tinfo->scsirate;
+ hscb->scsioffset = tinfo->curr.offset;
+ if ((tstate->ultraenb & mask) != 0)
+ hscb->control |= ULTRAENB;
+
+ if ((ahc->user_discenable & mask) != 0)
+ hscb->control |= DISCENB;
+
+ if ((tstate->auto_negotiate & mask) != 0) {
+ scb->flags |= SCB_AUTO_NEGOTIATE;
+ scb->hscb->control |= MK_MESSAGE;
+ }
+
+ if ((dev->flags & (AHC_DEV_Q_TAGGED|AHC_DEV_Q_BASIC)) != 0) {
+ int msg_bytes;
+ uint8_t tag_msgs[2];
+
+ msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs);
+ if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) {
+ hscb->control |= tag_msgs[0];
+ if (tag_msgs[0] == MSG_ORDERED_TASK)
+ dev->commands_since_idle_or_otag = 0;
+ } else if (dev->commands_since_idle_or_otag == AHC_OTAG_THRESH
+ && (dev->flags & AHC_DEV_Q_TAGGED) != 0) {
+ hscb->control |= MSG_ORDERED_TASK;
+ dev->commands_since_idle_or_otag = 0;
+ } else {
+ hscb->control |= MSG_SIMPLE_TASK;
+ }
+ }
+
+ hscb->cdb_len = cmd->cmd_len;
+ if (hscb->cdb_len <= 12) {
+ memcpy(hscb->shared_data.cdb, cmd->cmnd, hscb->cdb_len);
+ } else {
+ memcpy(hscb->cdb32, cmd->cmnd, hscb->cdb_len);
+ scb->flags |= SCB_CDB32_PTR;
+ }
+
+ scb->platform_data->xfer_len = 0;
+ ahc_set_residual(scb, 0);
+ ahc_set_sense_residual(scb, 0);
+ scb->sg_count = 0;
+ if (cmd->use_sg != 0) {
+ struct ahc_dma_seg *sg;
+ struct scatterlist *cur_seg;
+ struct scatterlist *end_seg;
+ int nseg;
+
+ cur_seg = (struct scatterlist *)cmd->request_buffer;
+ nseg = pci_map_sg(ahc->dev_softc, cur_seg, cmd->use_sg,
+ cmd->sc_data_direction);
+ end_seg = cur_seg + nseg;
+ /* Copy the segments into the SG list. */
+ sg = scb->sg_list;
+ /*
+ * The sg_count may be larger than nseg if
+ * a transfer crosses a 32bit page.
+ */
+ while (cur_seg < end_seg) {
+ dma_addr_t addr;
+ bus_size_t len;
+ int consumed;
+
+ addr = sg_dma_address(cur_seg);
+ len = sg_dma_len(cur_seg);
+ consumed = ahc_linux_map_seg(ahc, scb,
+ sg, addr, len);
+ sg += consumed;
+ scb->sg_count += consumed;
+ cur_seg++;
+ }
+ sg--;
+ sg->len |= ahc_htole32(AHC_DMA_LAST_SEG);
+
+ /*
+ * Reset the sg list pointer.
+ */
+ scb->hscb->sgptr =
+ ahc_htole32(scb->sg_list_phys | SG_FULL_RESID);
+
+ /*
+ * Copy the first SG into the "current"
+ * data pointer area.
+ */
+ scb->hscb->dataptr = scb->sg_list->addr;
+ scb->hscb->datacnt = scb->sg_list->len;
+ } else if (cmd->request_bufflen != 0) {
+ struct ahc_dma_seg *sg;
+ dma_addr_t addr;
+
+ sg = scb->sg_list;
+ addr = pci_map_single(ahc->dev_softc,
+ cmd->request_buffer,
+ cmd->request_bufflen,
+ cmd->sc_data_direction);
+ scb->platform_data->buf_busaddr = addr;
+ scb->sg_count = ahc_linux_map_seg(ahc, scb,
+ sg, addr,
+ cmd->request_bufflen);
+ sg->len |= ahc_htole32(AHC_DMA_LAST_SEG);
+
+ /*
+ * Reset the sg list pointer.
+ */
+ scb->hscb->sgptr =
+ ahc_htole32(scb->sg_list_phys | SG_FULL_RESID);
+
+ /*
+ * Copy the first SG into the "current"
+ * data pointer area.
+ */
+ scb->hscb->dataptr = sg->addr;
+ scb->hscb->datacnt = sg->len;
+ } else {
+ scb->hscb->sgptr = ahc_htole32(SG_LIST_NULL);
+ scb->hscb->dataptr = 0;
+ scb->hscb->datacnt = 0;
+ scb->sg_count = 0;
+ }
+
+ LIST_INSERT_HEAD(&ahc->pending_scbs, scb, pending_links);
+ dev->openings--;
+ dev->active++;
+ dev->commands_issued++;
+ if ((dev->flags & AHC_DEV_PERIODIC_OTAG) != 0)
+ dev->commands_since_idle_or_otag++;
+
+ scb->flags |= SCB_ACTIVE;
+ if (untagged_q) {
+ TAILQ_INSERT_TAIL(untagged_q, scb, links.tqe);
+ scb->flags |= SCB_UNTAGGEDQ;
+ }
+ ahc_queue_scb(ahc, scb);
+ return 0;
}
/*
@@ -2267,9 +1757,6 @@
ahc = (struct ahc_softc *) dev_id;
ahc_lock(ahc, &flags);
ours = ahc_intr(ahc);
- if (ahc_linux_next_device_to_run(ahc) != NULL)
- ahc_schedule_runq(ahc);
- ahc_linux_run_complete_queue(ahc);
ahc_unlock(ahc, &flags);
return IRQ_RETVAL(ours);
}
@@ -2278,8 +1765,6 @@
ahc_platform_flushwork(struct ahc_softc *ahc)
{
- while (ahc_linux_run_complete_queue(ahc) != NULL)
- ;
}
static struct ahc_linux_target*
@@ -2348,9 +1833,6 @@
if (dev == NULL)
return (NULL);
memset(dev, 0, sizeof(*dev));
- init_timer(&dev->timer);
- TAILQ_INIT(&dev->busyq);
- dev->flags = AHC_DEV_UNCONFIGURED;
dev->lun = lun;
dev->target = targ;
@@ -2373,7 +1855,7 @@
}
static void
-__ahc_linux_free_device(struct ahc_softc *ahc, struct ahc_linux_device *dev)
+ahc_linux_free_device(struct ahc_softc *ahc, struct ahc_linux_device *dev)
{
struct ahc_linux_target *targ;
@@ -2385,13 +1867,6 @@
ahc_linux_free_target(ahc, targ);
}
-static void
-ahc_linux_free_device(struct ahc_softc *ahc, struct ahc_linux_device *dev)
-{
- del_timer_sync(&dev->timer);
- __ahc_linux_free_device(ahc, dev);
-}
-
void
ahc_send_async(struct ahc_softc *ahc, char channel,
u_int target, u_int lun, ac_code code, void *arg)
@@ -2463,28 +1938,9 @@
}
case AC_SENT_BDR:
{
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
WARN_ON(lun != CAM_LUN_WILDCARD);
scsi_report_device_reset(ahc->platform_data->host,
channel - 'A', target);
-#else
- Scsi_Device *scsi_dev;
-
- /*
- * Find the SCSI device associated with this
- * request and indicate that a UA is expected.
- */
- for (scsi_dev = ahc->platform_data->host->host_queue;
- scsi_dev != NULL; scsi_dev = scsi_dev->next) {
- if (channel - 'A' == scsi_dev->channel
- && target == scsi_dev->id
- && (lun == CAM_LUN_WILDCARD
- || lun == scsi_dev->lun)) {
- scsi_dev->was_reset = 1;
- scsi_dev->expecting_cc_ua = 1;
- }
- }
-#endif
break;
}
case AC_BUS_RESET:
@@ -2504,7 +1960,7 @@
void
ahc_done(struct ahc_softc *ahc, struct scb *scb)
{
- Scsi_Cmnd *cmd;
+ struct scsi_cmnd *cmd;
struct ahc_linux_device *dev;
LIST_REMOVE(scb, pending_links);
@@ -2515,7 +1971,7 @@
target_offset = SCB_GET_TARGET_OFFSET(ahc, scb);
untagged_q = &(ahc->untagged_queues[target_offset]);
TAILQ_REMOVE(untagged_q, scb, links.tqe);
- ahc_run_untagged_queue(ahc, untagged_q);
+ BUG_ON(!TAILQ_EMPTY(untagged_q));
}
if ((scb->flags & SCB_ACTIVE) == 0) {
@@ -2583,8 +2039,6 @@
}
} else if (ahc_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) {
ahc_linux_handle_scsi_status(ahc, dev, scb);
- } else if (ahc_get_transaction_status(scb) == CAM_SEL_TIMEOUT) {
- dev->flags |= AHC_DEV_UNCONFIGURED;
}
if (dev->openings == 1
@@ -2606,16 +2060,6 @@
if (dev->active == 0)
dev->commands_since_idle_or_otag = 0;
- if (TAILQ_EMPTY(&dev->busyq)) {
- if ((dev->flags & AHC_DEV_UNCONFIGURED) != 0
- && dev->active == 0
- && (dev->flags & AHC_DEV_TIMER_ACTIVE) == 0)
- ahc_linux_free_device(ahc, dev);
- } else if ((dev->flags & AHC_DEV_ON_RUN_LIST) == 0) {
- TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq, dev, links);
- dev->flags |= AHC_DEV_ON_RUN_LIST;
- }
-
if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
printf("Recovery SCB completes\n");
if (ahc_get_transaction_status(scb) == CAM_BDR_SENT
@@ -2659,7 +2103,7 @@
case SCSI_STATUS_CHECK_COND:
case SCSI_STATUS_CMD_TERMINATED:
{
- Scsi_Cmnd *cmd;
+ struct scsi_cmnd *cmd;
/*
* Copy sense information to the OS's cmd
@@ -2754,52 +2198,15 @@
ahc_platform_set_tags(ahc, &devinfo,
(dev->flags & AHC_DEV_Q_BASIC)
? AHC_QUEUE_BASIC : AHC_QUEUE_TAGGED);
- /* FALLTHROUGH */
- }
- case SCSI_STATUS_BUSY:
- {
- /*
- * Set a short timer to defer sending commands for
- * a bit since Linux will not delay in this case.
- */
- if ((dev->flags & AHC_DEV_TIMER_ACTIVE) != 0) {
- printf("%s:%c:%d: Device Timer still active during "
- "busy processing\n", ahc_name(ahc),
- dev->target->channel, dev->target->target);
- break;
- }
- dev->flags |= AHC_DEV_TIMER_ACTIVE;
- dev->qfrozen++;
- init_timer(&dev->timer);
- dev->timer.data = (u_long)dev;
- dev->timer.expires = jiffies + (HZ/2);
- dev->timer.function = ahc_linux_dev_timed_unfreeze;
- add_timer(&dev->timer);
break;
}
}
}
static void
-ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, Scsi_Cmnd *cmd)
+ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, struct scsi_cmnd *cmd)
{
/*
- * Typically, the complete queue has very few entries
- * queued to it before the queue is emptied by
- * ahc_linux_run_complete_queue, so sorting the entries
- * by generation number should be inexpensive.
- * We perform the sort so that commands that complete
- * with an error are retuned in the order origionally
- * queued to the controller so that any subsequent retries
- * are performed in order. The underlying ahc routines do
- * not guarantee the order that aborted commands will be
- * returned to us.
- */
- struct ahc_completeq *completeq;
- struct ahc_cmd *list_cmd;
- struct ahc_cmd *acmd;
-
- /*
* Map CAM error codes into Linux Error codes. We
* avoid the conversion so that the DV code has the
* full error information available when making
@@ -2852,26 +2259,7 @@
new_status = DID_ERROR;
break;
case CAM_REQUEUE_REQ:
- /*
- * If we want the request requeued, make sure there
- * are sufficent retries. In the old scsi error code,
- * we used to be able to specify a result code that
- * bypassed the retry count. Now we must use this
- * hack. We also "fake" a check condition with
- * a sense code of ABORTED COMMAND. This seems to
- * evoke a retry even if this command is being sent
- * via the eh thread. Ick! Ick! Ick!
- */
- if (cmd->retries > 0)
- cmd->retries--;
- new_status = DID_OK;
- ahc_cmd_set_scsi_status(cmd, SCSI_STATUS_CHECK_COND);
- cmd->result |= (DRIVER_SENSE << 24);
- memset(cmd->sense_buffer, 0,
- sizeof(cmd->sense_buffer));
- cmd->sense_buffer[0] = SSD_ERRCODE_VALID
- | SSD_CURRENT_ERROR;
- cmd->sense_buffer[2] = SSD_KEY_ABORTED_COMMAND;
+ new_status = DID_REQUEUE;
break;
default:
/* We should never get here */
@@ -2882,17 +2270,7 @@
ahc_cmd_set_transaction_status(cmd, new_status);
}
- completeq = &ahc->platform_data->completeq;
- list_cmd = TAILQ_FIRST(completeq);
- acmd = (struct ahc_cmd *)cmd;
- while (list_cmd != NULL
- && acmd_scsi_cmd(list_cmd).serial_number
- < acmd_scsi_cmd(acmd).serial_number)
- list_cmd = TAILQ_NEXT(list_cmd, acmd_links.tqe);
- if (list_cmd != NULL)
- TAILQ_INSERT_BEFORE(list_cmd, acmd, acmd_links.tqe);
- else
- TAILQ_INSERT_TAIL(completeq, acmd, acmd_links.tqe);
+ cmd->scsi_done(cmd);
}
static void
@@ -2940,7 +2318,6 @@
ahc->platform_data->qfrozen--;
if (ahc->platform_data->qfrozen == 0)
unblock_reqs = 1;
- ahc_schedule_runq(ahc);
ahc_unlock(ahc, &s);
/*
* There is still a race here. The mid-layer
@@ -2952,37 +2329,12 @@
scsi_unblock_requests(ahc->platform_data->host);
}
-static void
-ahc_linux_dev_timed_unfreeze(u_long arg)
-{
- struct ahc_linux_device *dev;
- struct ahc_softc *ahc;
- u_long s;
-
- dev = (struct ahc_linux_device *)arg;
- ahc = dev->target->ahc;
- ahc_lock(ahc, &s);
- dev->flags &= ~AHC_DEV_TIMER_ACTIVE;
- if (dev->qfrozen > 0)
- dev->qfrozen--;
- if (dev->qfrozen == 0
- && (dev->flags & AHC_DEV_ON_RUN_LIST) == 0)
- ahc_linux_run_device_queue(ahc, dev);
- if (TAILQ_EMPTY(&dev->busyq)
- && dev->active == 0)
- __ahc_linux_free_device(ahc, dev);
- ahc_unlock(ahc, &s);
-}
-
static int
-ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag)
+ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
{
struct ahc_softc *ahc;
- struct ahc_cmd *acmd;
- struct ahc_cmd *list_acmd;
struct ahc_linux_device *dev;
struct scb *pending_scb;
- u_long s;
u_int saved_scbptr;
u_int active_scb_index;
u_int last_phase;
@@ -2998,7 +2350,6 @@
paused = FALSE;
wait = FALSE;
ahc = *(struct ahc_softc **)cmd->device->host->hostdata;
- acmd = (struct ahc_cmd *)cmd;
printf("%s:%d:%d:%d: Attempting to queue a%s message\n",
ahc_name(ahc), cmd->device->channel,
@@ -3011,22 +2362,6 @@
printf("\n");
/*
- * In all versions of Linux, we have to work around
- * a major flaw in how the mid-layer is locked down
- * if we are to sleep successfully in our error handler
- * while allowing our interrupt handler to run. Since
- * the midlayer acquires either the io_request_lock or
- * our lock prior to calling us, we must use the
- * spin_unlock_irq() method for unlocking our lock.
- * This will force interrupts to be enabled on the
- * current CPU. Since the EH thread should not have
- * been running with CPU interrupts disabled other than
- * by acquiring either the io_request_lock or our own
- * lock, this *should* be safe.
- */
- ahc_midlayer_entrypoint_lock(ahc, &s);
-
- /*
* First determine if we currently own this command.
* Start by searching the device queue. If not found
* there, check the pending_scb list. If not found
@@ -3034,7 +2369,7 @@
* command, return success.
*/
dev = ahc_linux_get_device(ahc, cmd->device->channel, cmd->device->id,
- cmd->device->lun, /*alloc*/FALSE);
+ cmd->device->lun);
if (dev == NULL) {
/*
@@ -3048,24 +2383,6 @@
goto no_cmd;
}
- TAILQ_FOREACH(list_acmd, &dev->busyq, acmd_links.tqe) {
- if (list_acmd == acmd)
- break;
- }
-
- if (list_acmd != NULL) {
- printf("%s:%d:%d:%d: Command found on device queue\n",
- ahc_name(ahc), cmd->device->channel, cmd->device->id,
- cmd->device->lun);
- if (flag == SCB_ABORT) {
- TAILQ_REMOVE(&dev->busyq, list_acmd, acmd_links.tqe);
- cmd->result = DID_ABORT << 16;
- ahc_linux_queue_cmd_complete(ahc, cmd);
- retval = SUCCESS;
- goto done;
- }
- }
-
if ((dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED)) == 0
&& ahc_search_untagged_queues(ahc, cmd, cmd->device->id,
cmd->device->channel + 'A',
@@ -3299,53 +2616,42 @@
}
spin_lock_irq(&ahc->platform_data->spin_lock);
}
- ahc_schedule_runq(ahc);
- ahc_linux_run_complete_queue(ahc);
- ahc_midlayer_entrypoint_unlock(ahc, &s);
return (retval);
}
void
ahc_platform_dump_card_state(struct ahc_softc *ahc)
{
- struct ahc_linux_device *dev;
- int channel;
- int maxchannel;
- int target;
- int maxtarget;
- int lun;
- int i;
-
- maxchannel = (ahc->features & AHC_TWIN) ? 1 : 0;
- maxtarget = (ahc->features & AHC_WIDE) ? 15 : 7;
- for (channel = 0; channel <= maxchannel; channel++) {
-
- for (target = 0; target <=maxtarget; target++) {
-
- for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
- struct ahc_cmd *acmd;
-
- dev = ahc_linux_get_device(ahc, channel, target,
- lun, /*alloc*/FALSE);
- if (dev == NULL)
- continue;
-
- printf("DevQ(%d:%d:%d): ",
- channel, target, lun);
- i = 0;
- TAILQ_FOREACH(acmd, &dev->busyq,
- acmd_links.tqe) {
- if (i++ > AHC_SCB_MAX)
- break;
- }
- printf("%d waiting\n", i);
- }
- }
- }
}
static void ahc_linux_exit(void);
+static void ahc_linux_get_width(struct scsi_target *starget)
+{
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata);
+ struct ahc_tmode_tstate *tstate;
+ struct ahc_initiator_tinfo *tinfo
+ = ahc_fetch_transinfo(ahc,
+ starget->channel + 'A',
+ shost->this_id, starget->id, &tstate);
+ spi_width(starget) = tinfo->curr.width;
+}
+
+static void ahc_linux_set_width(struct scsi_target *starget, int width)
+{
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata);
+ struct ahc_devinfo devinfo;
+ unsigned long flags;
+
+ ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
+ starget->channel + 'A', ROLE_INITIATOR);
+ ahc_lock(ahc, &flags);
+ ahc_set_width(ahc, &devinfo, width, AHC_TRANS_GOAL, FALSE);
+ ahc_unlock(ahc, &flags);
+}
+
static void ahc_linux_get_period(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
@@ -3376,8 +2682,21 @@
if (offset == 0)
offset = MAX_OFFSET;
+ if (period < 9)
+ period = 9; /* 12.5ns is our minimum */
+ if (period == 9)
+ ppr_options |= MSG_EXT_PPR_DT_REQ;
+
ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
+
+ /* all PPR requests apart from QAS require wide transfers */
+ if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) {
+ ahc_linux_get_width(starget);
+ if (spi_width(starget) == 0)
+ ppr_options &= MSG_EXT_PPR_QAS_REQ;
+ }
+
syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, AHC_SYNCRATE_DT);
ahc_lock(ahc, &flags);
ahc_set_syncrate(ahc, &devinfo, syncrate, period, offset,
@@ -3425,32 +2744,6 @@
ahc_unlock(ahc, &flags);
}
-static void ahc_linux_get_width(struct scsi_target *starget)
-{
- struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
- struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata);
- struct ahc_tmode_tstate *tstate;
- struct ahc_initiator_tinfo *tinfo
- = ahc_fetch_transinfo(ahc,
- starget->channel + 'A',
- shost->this_id, starget->id, &tstate);
- spi_width(starget) = tinfo->curr.width;
-}
-
-static void ahc_linux_set_width(struct scsi_target *starget, int width)
-{
- struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
- struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata);
- struct ahc_devinfo devinfo;
- unsigned long flags;
-
- ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
- starget->channel + 'A', ROLE_INITIATOR);
- ahc_lock(ahc, &flags);
- ahc_set_width(ahc, &devinfo, width, AHC_TRANS_GOAL, FALSE);
- ahc_unlock(ahc, &flags);
-}
-
static void ahc_linux_get_dt(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
@@ -3479,10 +2772,15 @@
unsigned long flags;
struct ahc_syncrate *syncrate;
+ if (dt) {
+ period = 9; /* 12.5ns is the only period valid for DT */
+ ppr_options |= MSG_EXT_PPR_DT_REQ;
+ } else if (period == 9)
+ period = 10; /* if resetting DT, period must be >= 25ns */
+
ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
- syncrate = ahc_find_syncrate(ahc, &period, &ppr_options,
- dt ? AHC_SYNCRATE_DT : AHC_SYNCRATE_ULTRA2);
+ syncrate = ahc_find_syncrate(ahc, &period, &ppr_options,AHC_SYNCRATE_DT);
ahc_lock(ahc, &flags);
ahc_set_syncrate(ahc, &devinfo, syncrate, period, tinfo->curr.offset,
ppr_options, AHC_TRANS_GOAL, FALSE);
@@ -3514,7 +2812,6 @@
unsigned int ppr_options = tinfo->curr.ppr_options
& ~MSG_EXT_PPR_QAS_REQ;
unsigned int period = tinfo->curr.period;
- unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
unsigned long flags;
struct ahc_syncrate *syncrate;
@@ -3523,8 +2820,7 @@
ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
- syncrate = ahc_find_syncrate(ahc, &period, &ppr_options,
- dt ? AHC_SYNCRATE_DT : AHC_SYNCRATE_ULTRA2);
+ syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, AHC_SYNCRATE_DT);
ahc_lock(ahc, &flags);
ahc_set_syncrate(ahc, &devinfo, syncrate, period, tinfo->curr.offset,
ppr_options, AHC_TRANS_GOAL, FALSE);
@@ -3556,7 +2852,6 @@
unsigned int ppr_options = tinfo->curr.ppr_options
& ~MSG_EXT_PPR_IU_REQ;
unsigned int period = tinfo->curr.period;
- unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
unsigned long flags;
struct ahc_syncrate *syncrate;
@@ -3565,8 +2860,7 @@
ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
- syncrate = ahc_find_syncrate(ahc, &period, &ppr_options,
- dt ? AHC_SYNCRATE_DT : AHC_SYNCRATE_ULTRA2);
+ syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, AHC_SYNCRATE_DT);
ahc_lock(ahc, &flags);
ahc_set_syncrate(ahc, &devinfo, syncrate, period, tinfo->curr.offset,
ppr_options, AHC_TRANS_GOAL, FALSE);
@@ -3599,7 +2893,6 @@
static int __init
ahc_linux_init(void)
{
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
ahc_linux_transport_template = spi_attach_transport(&ahc_linux_transport_functions);
if (!ahc_linux_transport_template)
return -ENODEV;
@@ -3608,29 +2901,11 @@
spi_release_transport(ahc_linux_transport_template);
ahc_linux_exit();
return -ENODEV;
-#else
- scsi_register_module(MODULE_SCSI_HA, &aic7xxx_driver_template);
- if (aic7xxx_driver_template.present == 0) {
- scsi_unregister_module(MODULE_SCSI_HA,
- &aic7xxx_driver_template);
- return (-ENODEV);
- }
-
- return (0);
-#endif
}
static void
ahc_linux_exit(void)
{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- /*
- * In 2.4 we have to unregister from the PCI core _after_
- * unregistering from the scsi midlayer to avoid dangling
- * references.
- */
- scsi_unregister_module(MODULE_SCSI_HA, &aic7xxx_driver_template);
-#endif
ahc_linux_pci_exit();
ahc_linux_eisa_exit();
spi_release_transport(ahc_linux_transport_template);
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.h b/drivers/scsi/aic7xxx/aic7xxx_osm.h
index ed9027b..30c200d 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.h
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.h
@@ -59,6 +59,7 @@
#ifndef _AIC7XXX_LINUX_H_
#define _AIC7XXX_LINUX_H_
+#include <linux/config.h>
#include <linux/types.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
@@ -66,18 +67,21 @@
#include <linux/pci.h>
#include <linux/smp_lock.h>
#include <linux/version.h>
+#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/io.h>
-#include <linux/interrupt.h> /* For tasklet support. */
-#include <linux/config.h>
-#include <linux/slab.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
/* Core SCSI definitions */
#define AIC_LIB_PREFIX ahc
-#include "scsi.h"
-#include <scsi/scsi_host.h>
/* Name space conflict with BSD queue macros */
#ifdef LIST_HEAD
@@ -106,7 +110,7 @@
/************************* Forward Declarations *******************************/
struct ahc_softc;
typedef struct pci_dev *ahc_dev_softc_t;
-typedef Scsi_Cmnd *ahc_io_ctx_t;
+typedef struct scsi_cmnd *ahc_io_ctx_t;
/******************************* Byte Order ***********************************/
#define ahc_htobe16(x) cpu_to_be16(x)
@@ -144,7 +148,7 @@
extern u_int aic7xxx_no_probe;
extern u_int aic7xxx_allow_memio;
extern int aic7xxx_detect_complete;
-extern Scsi_Host_Template aic7xxx_driver_template;
+extern struct scsi_host_template aic7xxx_driver_template;
/***************************** Bus Space/DMA **********************************/
@@ -174,11 +178,7 @@
};
typedef struct ahc_linux_dma_tag* bus_dma_tag_t;
-struct ahc_linux_dmamap
-{
- dma_addr_t bus_addr;
-};
-typedef struct ahc_linux_dmamap* bus_dmamap_t;
+typedef dma_addr_t bus_dmamap_t;
typedef int bus_dma_filter_t(void*, dma_addr_t);
typedef void bus_dmamap_callback_t(void *, bus_dma_segment_t *, int, int);
@@ -281,12 +281,6 @@
/***************************** SMP support ************************************/
#include <linux/spinlock.h>
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) || defined(SCSI_HAS_HOST_LOCK))
-#define AHC_SCSI_HAS_HOST_LOCK 1
-#else
-#define AHC_SCSI_HAS_HOST_LOCK 0
-#endif
-
#define AIC7XXX_DRIVER_VERSION "6.2.36"
/**************************** Front End Queues ********************************/
@@ -328,20 +322,15 @@
*/
TAILQ_HEAD(ahc_busyq, ahc_cmd);
typedef enum {
- AHC_DEV_UNCONFIGURED = 0x01,
AHC_DEV_FREEZE_TIL_EMPTY = 0x02, /* Freeze queue until active == 0 */
- AHC_DEV_TIMER_ACTIVE = 0x04, /* Our timer is active */
- AHC_DEV_ON_RUN_LIST = 0x08, /* Queued to be run later */
AHC_DEV_Q_BASIC = 0x10, /* Allow basic device queuing */
AHC_DEV_Q_TAGGED = 0x20, /* Allow full SCSI2 command queueing */
AHC_DEV_PERIODIC_OTAG = 0x40, /* Send OTAG to prevent starvation */
- AHC_DEV_SLAVE_CONFIGURED = 0x80 /* slave_configure() has been called */
} ahc_linux_dev_flags;
struct ahc_linux_target;
struct ahc_linux_device {
TAILQ_ENTRY(ahc_linux_device) links;
- struct ahc_busyq busyq;
/*
* The number of transactions currently
@@ -382,11 +371,6 @@
ahc_linux_dev_flags flags;
/*
- * Per device timer.
- */
- struct timer_list timer;
-
- /*
* The high limit for the tags variable.
*/
u_int maxtags;
@@ -419,7 +403,7 @@
#define AHC_OTAG_THRESH 500
int lun;
- Scsi_Device *scsi_device;
+ struct scsi_device *scsi_device;
struct ahc_linux_target *target;
};
@@ -439,32 +423,16 @@
* manner and are allocated below 4GB, the number of S/G segments is
* unrestricted.
*/
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-/*
- * We dynamically adjust the number of segments in pre-2.5 kernels to
- * avoid fragmentation issues in the SCSI mid-layer's private memory
- * allocator. See aic7xxx_osm.c ahc_linux_size_nseg() for details.
- */
-extern u_int ahc_linux_nseg;
-#define AHC_NSEG ahc_linux_nseg
-#define AHC_LINUX_MIN_NSEG 64
-#else
#define AHC_NSEG 128
-#endif
/*
* Per-SCB OSM storage.
*/
-typedef enum {
- AHC_UP_EH_SEMAPHORE = 0x1
-} ahc_linux_scb_flags;
-
struct scb_platform_data {
struct ahc_linux_device *dev;
dma_addr_t buf_busaddr;
uint32_t xfer_len;
uint32_t sense_resid; /* Auto-Sense residual */
- ahc_linux_scb_flags flags;
};
/*
@@ -473,39 +441,24 @@
* alignment restrictions of the various platforms supported by
* this driver.
*/
-typedef enum {
- AHC_RUN_CMPLT_Q_TIMER = 0x10
-} ahc_linux_softc_flags;
-
-TAILQ_HEAD(ahc_completeq, ahc_cmd);
-
struct ahc_platform_data {
/*
* Fields accessed from interrupt context.
*/
struct ahc_linux_target *targets[AHC_NUM_TARGETS];
- TAILQ_HEAD(, ahc_linux_device) device_runq;
- struct ahc_completeq completeq;
spinlock_t spin_lock;
- struct tasklet_struct runq_tasklet;
u_int qfrozen;
- pid_t dv_pid;
- struct timer_list completeq_timer;
struct timer_list reset_timer;
struct semaphore eh_sem;
- struct semaphore dv_sem;
- struct semaphore dv_cmd_sem; /* XXX This needs to be in
- * the target struct
- */
- struct scsi_device *dv_scsi_dev;
struct Scsi_Host *host; /* pointer to scsi host */
#define AHC_LINUX_NOIRQ ((uint32_t)~0)
uint32_t irq; /* IRQ for this adapter */
uint32_t bios_address;
uint32_t mem_busaddr; /* Mem Base Addr */
- uint64_t hw_dma_mask;
- ahc_linux_softc_flags flags;
+
+#define AHC_UP_EH_SEMAPHORE 0x1
+ uint32_t flags;
};
/************************** OS Utility Wrappers *******************************/
@@ -594,7 +547,7 @@
/**************************** Initialization **********************************/
int ahc_linux_register_host(struct ahc_softc *,
- Scsi_Host_Template *);
+ struct scsi_host_template *);
uint64_t ahc_linux_get_memsize(void);
@@ -615,17 +568,6 @@
static __inline void ahc_lock(struct ahc_softc *, unsigned long *flags);
static __inline void ahc_unlock(struct ahc_softc *, unsigned long *flags);
-/* Lock acquisition and release of the above lock in midlayer entry points. */
-static __inline void ahc_midlayer_entrypoint_lock(struct ahc_softc *,
- unsigned long *flags);
-static __inline void ahc_midlayer_entrypoint_unlock(struct ahc_softc *,
- unsigned long *flags);
-
-/* Lock held during command compeletion to the upper layer */
-static __inline void ahc_done_lockinit(struct ahc_softc *);
-static __inline void ahc_done_lock(struct ahc_softc *, unsigned long *flags);
-static __inline void ahc_done_unlock(struct ahc_softc *, unsigned long *flags);
-
/* Lock held during ahc_list manipulation and ahc softc frees */
extern spinlock_t ahc_list_spinlock;
static __inline void ahc_list_lockinit(void);
@@ -651,57 +593,6 @@
}
static __inline void
-ahc_midlayer_entrypoint_lock(struct ahc_softc *ahc, unsigned long *flags)
-{
- /*
- * In 2.5.X and some 2.4.X versions, the midlayer takes our
- * lock just before calling us, so we avoid locking again.
- * For other kernel versions, the io_request_lock is taken
- * just before our entry point is called. In this case, we
- * trade the io_request_lock for our per-softc lock.
- */
-#if AHC_SCSI_HAS_HOST_LOCK == 0
- spin_unlock(&io_request_lock);
- spin_lock(&ahc->platform_data->spin_lock);
-#endif
-}
-
-static __inline void
-ahc_midlayer_entrypoint_unlock(struct ahc_softc *ahc, unsigned long *flags)
-{
-#if AHC_SCSI_HAS_HOST_LOCK == 0
- spin_unlock(&ahc->platform_data->spin_lock);
- spin_lock(&io_request_lock);
-#endif
-}
-
-static __inline void
-ahc_done_lockinit(struct ahc_softc *ahc)
-{
- /*
- * In 2.5.X, our own lock is held during completions.
- * In previous versions, the io_request_lock is used.
- * In either case, we can't initialize this lock again.
- */
-}
-
-static __inline void
-ahc_done_lock(struct ahc_softc *ahc, unsigned long *flags)
-{
-#if AHC_SCSI_HAS_HOST_LOCK == 0
- spin_lock_irqsave(&io_request_lock, *flags);
-#endif
-}
-
-static __inline void
-ahc_done_unlock(struct ahc_softc *ahc, unsigned long *flags)
-{
-#if AHC_SCSI_HAS_HOST_LOCK == 0
- spin_unlock_irqrestore(&io_request_lock, *flags);
-#endif
-}
-
-static __inline void
ahc_list_lockinit(void)
{
spin_lock_init(&ahc_list_spinlock);
@@ -767,12 +658,6 @@
} ahc_power_state;
/**************************** VL/EISA Routines ********************************/
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) \
- && (defined(__i386__) || defined(__alpha__)) \
- && (!defined(CONFIG_EISA)))
-#define CONFIG_EISA
-#endif
-
#ifdef CONFIG_EISA
extern uint32_t aic7xxx_probe_eisa_vl;
int ahc_linux_eisa_init(void);
@@ -888,22 +773,18 @@
}
/**************************** Proc FS Support *********************************/
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-int ahc_linux_proc_info(char *, char **, off_t, int, int, int);
-#else
int ahc_linux_proc_info(struct Scsi_Host *, char *, char **,
off_t, int, int);
-#endif
/*************************** Domain Validation ********************************/
/*********************** Transaction Access Wrappers *************************/
-static __inline void ahc_cmd_set_transaction_status(Scsi_Cmnd *, uint32_t);
+static __inline void ahc_cmd_set_transaction_status(struct scsi_cmnd *, uint32_t);
static __inline void ahc_set_transaction_status(struct scb *, uint32_t);
-static __inline void ahc_cmd_set_scsi_status(Scsi_Cmnd *, uint32_t);
+static __inline void ahc_cmd_set_scsi_status(struct scsi_cmnd *, uint32_t);
static __inline void ahc_set_scsi_status(struct scb *, uint32_t);
-static __inline uint32_t ahc_cmd_get_transaction_status(Scsi_Cmnd *cmd);
+static __inline uint32_t ahc_cmd_get_transaction_status(struct scsi_cmnd *cmd);
static __inline uint32_t ahc_get_transaction_status(struct scb *);
-static __inline uint32_t ahc_cmd_get_scsi_status(Scsi_Cmnd *cmd);
+static __inline uint32_t ahc_cmd_get_scsi_status(struct scsi_cmnd *cmd);
static __inline uint32_t ahc_get_scsi_status(struct scb *);
static __inline void ahc_set_transaction_tag(struct scb *, int, u_int);
static __inline u_long ahc_get_transfer_length(struct scb *);
@@ -922,7 +803,7 @@
static __inline void ahc_freeze_scb(struct scb *scb);
static __inline
-void ahc_cmd_set_transaction_status(Scsi_Cmnd *cmd, uint32_t status)
+void ahc_cmd_set_transaction_status(struct scsi_cmnd *cmd, uint32_t status)
{
cmd->result &= ~(CAM_STATUS_MASK << 16);
cmd->result |= status << 16;
@@ -935,7 +816,7 @@
}
static __inline
-void ahc_cmd_set_scsi_status(Scsi_Cmnd *cmd, uint32_t status)
+void ahc_cmd_set_scsi_status(struct scsi_cmnd *cmd, uint32_t status)
{
cmd->result &= ~0xFFFF;
cmd->result |= status;
@@ -948,7 +829,7 @@
}
static __inline
-uint32_t ahc_cmd_get_transaction_status(Scsi_Cmnd *cmd)
+uint32_t ahc_cmd_get_transaction_status(struct scsi_cmnd *cmd)
{
return ((cmd->result >> 16) & CAM_STATUS_MASK);
}
@@ -960,7 +841,7 @@
}
static __inline
-uint32_t ahc_cmd_get_scsi_status(Scsi_Cmnd *cmd)
+uint32_t ahc_cmd_get_scsi_status(struct scsi_cmnd *cmd)
{
return (cmd->result & 0xFFFF);
}
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
index 6f6674a..2a0ebce 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
@@ -221,13 +221,11 @@
&& ahc_linux_get_memsize() > 0x80000000
&& pci_set_dma_mask(pdev, mask_39bit) == 0) {
ahc->flags |= AHC_39BIT_ADDRESSING;
- ahc->platform_data->hw_dma_mask = mask_39bit;
} else {
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n");
return (-ENODEV);
}
- ahc->platform_data->hw_dma_mask = DMA_32BIT_MASK;
}
ahc->dev_softc = pci;
error = ahc_pci_config(ahc, entry);
@@ -236,15 +234,8 @@
return (-error);
}
pci_set_drvdata(pdev, ahc);
- if (aic7xxx_detect_complete) {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+ if (aic7xxx_detect_complete)
ahc_linux_register_host(ahc, &aic7xxx_driver_template);
-#else
- printf("aic7xxx: ignoring PCI device found after "
- "initialization\n");
- return (-ENODEV);
-#endif
- }
return (0);
}
diff --git a/drivers/scsi/aic7xxx/aic7xxx_proc.c b/drivers/scsi/aic7xxx/aic7xxx_proc.c
index 85e80ee..5fece85 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_proc.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_proc.c
@@ -289,13 +289,8 @@
* Return information to handle /proc support for the driver.
*/
int
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-ahc_linux_proc_info(char *buffer, char **start, off_t offset,
- int length, int hostno, int inout)
-#else
ahc_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start,
off_t offset, int length, int inout)
-#endif
{
struct ahc_softc *ahc;
struct info_str info;
@@ -307,15 +302,7 @@
retval = -EINVAL;
ahc_list_lock(&s);
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- TAILQ_FOREACH(ahc, &ahc_tailq, links) {
- if (ahc->platform_data->host->host_no == hostno)
- break;
- }
-#else
ahc = ahc_find_softc(*(struct ahc_softc **)shost->hostdata);
-#endif
-
if (ahc == NULL)
goto done;
diff --git a/drivers/scsi/aic7xxx/aiclib.c b/drivers/scsi/aic7xxx/aiclib.c
index 79bfd9e..7c5a6db 100644
--- a/drivers/scsi/aic7xxx/aiclib.c
+++ b/drivers/scsi/aic7xxx/aiclib.c
@@ -35,7 +35,6 @@
#include <linux/version.h>
/* Core SCSI definitions */
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include "aiclib.h"
#include "cam.h"
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 3867f91..3be5464 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -153,6 +153,7 @@
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_operations piix_sata_ops = {
@@ -180,6 +181,7 @@
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info piix_port_info[] = {
@@ -663,15 +665,6 @@
return ata_pci_init_one(pdev, port_info, n_ports);
}
-/**
- * piix_init -
- *
- * LOCKING:
- *
- * RETURNS:
- *
- */
-
static int __init piix_init(void)
{
int rc;
@@ -687,13 +680,6 @@
return 0;
}
-/**
- * piix_exit -
- *
- * LOCKING:
- *
- */
-
static void __exit piix_exit(void)
{
pci_unregister_driver(&piix_pci_driver);
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 2e2486b..83f062e 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -179,8 +179,18 @@
return;
}
count = min(pc->sg->length - pc->b_count, bcount);
- buf = page_address(pc->sg->page) + pc->sg->offset;
- drive->hwif->atapi_input_bytes(drive, buf + pc->b_count, count);
+ if (PageHighMem(pc->sg->page)) {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ buf = kmap_atomic(pc->sg->page, KM_IRQ0) + pc->sg->offset;
+ drive->hwif->atapi_input_bytes(drive, buf + pc->b_count, count);
+ kunmap_atomic(buf - pc->sg->offset, KM_IRQ0);
+ local_irq_restore(flags);
+ } else {
+ buf = page_address(pc->sg->page) + pc->sg->offset;
+ drive->hwif->atapi_input_bytes(drive, buf + pc->b_count, count);
+ }
bcount -= count; pc->b_count += count;
if (pc->b_count == pc->sg->length) {
pc->sg++;
@@ -201,8 +211,18 @@
return;
}
count = min(pc->sg->length - pc->b_count, bcount);
- buf = page_address(pc->sg->page) + pc->sg->offset;
- drive->hwif->atapi_output_bytes(drive, buf + pc->b_count, count);
+ if (PageHighMem(pc->sg->page)) {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ buf = kmap_atomic(pc->sg->page, KM_IRQ0) + pc->sg->offset;
+ drive->hwif->atapi_output_bytes(drive, buf + pc->b_count, count);
+ kunmap_atomic(buf - pc->sg->offset, KM_IRQ0);
+ local_irq_restore(flags);
+ } else {
+ buf = page_address(pc->sg->page) + pc->sg->offset;
+ drive->hwif->atapi_output_bytes(drive, buf + pc->b_count, count);
+ }
bcount -= count; pc->b_count += count;
if (pc->b_count == pc->sg->length) {
pc->sg++;
@@ -713,7 +733,6 @@
*/
static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi)
{
- DRIVER(drive)->busy++;
if (drive->id && (drive->id->config & 0x0060) == 0x20)
set_bit (IDESCSI_DRQ_INTERRUPT, &scsi->flags);
set_bit(IDESCSI_TRANSFORM, &scsi->transform);
@@ -722,17 +741,16 @@
set_bit(IDESCSI_LOG_CMD, &scsi->log);
#endif /* IDESCSI_DEBUG_LOG */
idescsi_add_settings(drive);
- DRIVER(drive)->busy--;
}
-static int idescsi_cleanup (ide_drive_t *drive)
+static int ide_scsi_remove(struct device *dev)
{
+ ide_drive_t *drive = to_ide_device(dev);
struct Scsi_Host *scsihost = drive->driver_data;
struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost);
struct gendisk *g = scsi->disk;
- if (ide_unregister_subdriver(drive))
- return 1;
+ ide_unregister_subdriver(drive, scsi->driver);
ide_unregister_region(g);
@@ -746,7 +764,7 @@
return 0;
}
-static int idescsi_attach(ide_drive_t *drive);
+static int ide_scsi_probe(struct device *);
#ifdef CONFIG_PROC_FS
static ide_proc_entry_t idescsi_proc[] = {
@@ -757,24 +775,22 @@
# define idescsi_proc NULL
#endif
-/*
- * IDE subdriver functions, registered with ide.c
- */
static ide_driver_t idescsi_driver = {
.owner = THIS_MODULE,
- .name = "ide-scsi",
+ .gen_driver = {
+ .name = "ide-scsi",
+ .bus = &ide_bus_type,
+ .probe = ide_scsi_probe,
+ .remove = ide_scsi_remove,
+ },
.version = IDESCSI_VERSION,
.media = ide_scsi,
- .busy = 0,
.supports_dsc_overlap = 0,
.proc = idescsi_proc,
- .attach = idescsi_attach,
- .cleanup = idescsi_cleanup,
.do_request = idescsi_do_request,
.end_request = idescsi_end_request,
.error = idescsi_atapi_error,
.abort = idescsi_atapi_abort,
- .drives = LIST_HEAD_INIT(idescsi_driver.drives),
};
static int idescsi_ide_open(struct inode *inode, struct file *filp)
@@ -821,8 +837,6 @@
.ioctl = idescsi_ide_ioctl,
};
-static int idescsi_attach(ide_drive_t *drive);
-
static int idescsi_slave_configure(struct scsi_device * sdp)
{
/* Configure detected device */
@@ -1095,8 +1109,9 @@
.proc_name = "ide-scsi",
};
-static int idescsi_attach(ide_drive_t *drive)
+static int ide_scsi_probe(struct device *dev)
{
+ ide_drive_t *drive = to_ide_device(dev);
idescsi_scsi_t *idescsi;
struct Scsi_Host *host;
struct gendisk *g;
@@ -1112,7 +1127,7 @@
!drive->present ||
drive->media == ide_disk ||
!(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t))))
- return 1;
+ return -ENODEV;
g = alloc_disk(1 << PARTN_BITS);
if (!g)
@@ -1138,20 +1153,19 @@
idescsi->host = host;
idescsi->disk = g;
g->private_data = &idescsi->driver;
- err = ide_register_subdriver(drive, &idescsi_driver);
+ ide_register_subdriver(drive, &idescsi_driver);
+ err = 0;
+ idescsi_setup(drive, idescsi);
+ g->fops = &idescsi_ops;
+ ide_register_region(g);
+ err = scsi_add_host(host, &drive->gendev);
if (!err) {
- idescsi_setup (drive, idescsi);
- g->fops = &idescsi_ops;
- ide_register_region(g);
- err = scsi_add_host(host, &drive->gendev);
- if (!err) {
- scsi_scan_host(host);
- return 0;
- }
- /* fall through on error */
- ide_unregister_region(g);
- ide_unregister_subdriver(drive);
+ scsi_scan_host(host);
+ return 0;
}
+ /* fall through on error */
+ ide_unregister_region(g);
+ ide_unregister_subdriver(drive, &idescsi_driver);
put_disk(g);
out_host_put:
@@ -1161,12 +1175,12 @@
static int __init init_idescsi_module(void)
{
- return ide_register_driver(&idescsi_driver);
+ return driver_register(&idescsi_driver.gen_driver);
}
static void __exit exit_idescsi_module(void)
{
- ide_unregister_driver(&idescsi_driver);
+ driver_unregister(&idescsi_driver.gen_driver);
}
module_init(init_idescsi_module);
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 0b5d3a5..21d194c 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -186,6 +186,28 @@
ata_wait_idle(ap);
}
+
+/**
+ * ata_tf_load - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @tf: ATA taskfile register set
+ *
+ * Outputs ATA taskfile to standard ATA host controller using MMIO
+ * or PIO as indicated by the ATA_FLAG_MMIO flag.
+ * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
+ * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
+ * hob_lbal, hob_lbam, and hob_lbah.
+ *
+ * This function waits for idle (!BUSY and !DRQ) after writing
+ * registers. If the control register has a new value, this
+ * function also waits for idle after writing control and before
+ * writing the remaining registers.
+ *
+ * May be used as the tf_load() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
@@ -195,11 +217,11 @@
}
/**
- * ata_exec_command - issue ATA command to host controller
+ * ata_exec_command_pio - issue ATA command to host controller
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
*
- * Issues PIO/MMIO write to ATA command register, with proper
+ * Issues PIO write to ATA command register, with proper
* synchronization with interrupt handler / other threads.
*
* LOCKING:
@@ -235,6 +257,18 @@
ata_pause(ap);
}
+
+/**
+ * ata_exec_command - issue ATA command to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Issues PIO/MMIO write to ATA command register, with proper
+ * synchronization with interrupt handler / other threads.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
@@ -305,7 +339,7 @@
}
/**
- * ata_tf_read - input device's ATA taskfile shadow registers
+ * ata_tf_read_pio - input device's ATA taskfile shadow registers
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
@@ -368,6 +402,23 @@
}
}
+
+/**
+ * ata_tf_read - input device's ATA taskfile shadow registers
+ * @ap: Port from which input is read
+ * @tf: ATA taskfile register set for storing input
+ *
+ * Reads ATA taskfile registers for currently-selected device
+ * into @tf.
+ *
+ * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48
+ * is set, also reads the hob registers.
+ *
+ * May be used as the tf_read() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
@@ -381,7 +432,7 @@
* @ap: port where the device is
*
* Reads ATA taskfile status register for currently-selected device
- * and return it's value. This also clears pending interrupts
+ * and return its value. This also clears pending interrupts
* from this device
*
* LOCKING:
@@ -397,7 +448,7 @@
* @ap: port where the device is
*
* Reads ATA taskfile status register for currently-selected device
- * via MMIO and return it's value. This also clears pending interrupts
+ * via MMIO and return its value. This also clears pending interrupts
* from this device
*
* LOCKING:
@@ -408,6 +459,20 @@
return readb((void __iomem *) ap->ioaddr.status_addr);
}
+
+/**
+ * ata_check_status - Read device status reg & clear interrupt
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile status register for currently-selected device
+ * and return its value. This also clears pending interrupts
+ * from this device
+ *
+ * May be used as the check_status() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
u8 ata_check_status(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_MMIO)
@@ -415,6 +480,20 @@
return ata_check_status_pio(ap);
}
+
+/**
+ * ata_altstatus - Read device alternate status reg
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile alternate status register for
+ * currently-selected device and return its value.
+ *
+ * Note: may NOT be used as the check_altstatus() entry in
+ * ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
u8 ata_altstatus(struct ata_port *ap)
{
if (ap->ops->check_altstatus)
@@ -425,6 +504,20 @@
return inb(ap->ioaddr.altstatus_addr);
}
+
+/**
+ * ata_chk_err - Read device error reg
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile error register for
+ * currently-selected device and return its value.
+ *
+ * Note: may NOT be used as the check_err() entry in
+ * ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
u8 ata_chk_err(struct ata_port *ap)
{
if (ap->ops->check_err)
@@ -873,10 +966,24 @@
}
}
+
+/**
+ * ata_noop_dev_select - Select device 0/1 on ATA bus
+ * @ap: ATA channel to manipulate
+ * @device: ATA device (numbered from zero) to select
+ *
+ * This function performs no actual function.
+ *
+ * May be used as the dev_select() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * caller.
+ */
void ata_noop_dev_select (struct ata_port *ap, unsigned int device)
{
}
+
/**
* ata_std_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
@@ -884,7 +991,9 @@
*
* Use the method defined in the ATA specification to
* make either device 0, or device 1, active on the
- * ATA channel.
+ * ATA channel. Works with both PIO and MMIO.
+ *
+ * May be used as the dev_select() entry in ata_port_operations.
*
* LOCKING:
* caller.
@@ -1190,7 +1299,12 @@
* ata_bus_probe - Reset and probe ATA bus
* @ap: Bus to probe
*
+ * Master ATA bus probing function. Initiates a hardware-dependent
+ * bus reset, then attempts to identify any devices found on
+ * the bus.
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*
* RETURNS:
* Zero on success, non-zero on error.
@@ -1229,10 +1343,14 @@
}
/**
- * ata_port_probe -
- * @ap:
+ * ata_port_probe - Mark port as enabled
+ * @ap: Port for which we indicate enablement
*
- * LOCKING:
+ * Modify @ap data structure such that the system
+ * thinks that the entire port is enabled.
+ *
+ * LOCKING: host_set lock, or some other form of
+ * serialization.
*/
void ata_port_probe(struct ata_port *ap)
@@ -1241,10 +1359,15 @@
}
/**
- * __sata_phy_reset -
- * @ap:
+ * __sata_phy_reset - Wake/reset a low-level SATA PHY
+ * @ap: SATA port associated with target SATA PHY.
+ *
+ * This function issues commands to standard SATA Sxxx
+ * PHY registers, to wake up the phy (and device), and
+ * clear any reset condition.
*
* LOCKING:
+ * PCI/etc. bus probe sem.
*
*/
void __sata_phy_reset(struct ata_port *ap)
@@ -1253,11 +1376,11 @@
unsigned long timeout = jiffies + (HZ * 5);
if (ap->flags & ATA_FLAG_SATA_RESET) {
- scr_write(ap, SCR_CONTROL, 0x301); /* issue phy wake/reset */
- scr_read(ap, SCR_STATUS); /* dummy read; flush */
+ /* issue phy wake/reset */
+ scr_write_flush(ap, SCR_CONTROL, 0x301);
udelay(400); /* FIXME: a guess */
}
- scr_write(ap, SCR_CONTROL, 0x300); /* issue phy wake/clear reset */
+ scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */
/* wait for phy to become ready, if necessary */
do {
@@ -1289,10 +1412,14 @@
}
/**
- * __sata_phy_reset -
- * @ap:
+ * sata_phy_reset - Reset SATA bus.
+ * @ap: SATA port associated with target SATA PHY.
+ *
+ * This function resets the SATA bus, and then probes
+ * the bus for devices.
*
* LOCKING:
+ * PCI/etc. bus probe sem.
*
*/
void sata_phy_reset(struct ata_port *ap)
@@ -1304,10 +1431,16 @@
}
/**
- * ata_port_disable -
- * @ap:
+ * ata_port_disable - Disable port.
+ * @ap: Port to be disabled.
*
- * LOCKING:
+ * Modify @ap data structure such that the system
+ * thinks that the entire port is disabled, and should
+ * never attempt to probe or communicate with devices
+ * on this port.
+ *
+ * LOCKING: host_set lock, or some other form of
+ * serialization.
*/
void ata_port_disable(struct ata_port *ap)
@@ -1416,7 +1549,10 @@
* ata_set_mode - Program timings and issue SET FEATURES - XFER
* @ap: port on which timings will be programmed
*
+ * Set ATA device disk transfer mode (PIO3, UDMA6, etc.).
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*
*/
static void ata_set_mode(struct ata_port *ap)
@@ -1467,7 +1603,10 @@
* @tmout_pat: impatience timeout
* @tmout: overall timeout
*
- * LOCKING:
+ * Sleep until ATA Status register bit BSY clears,
+ * or a timeout occurs.
+ *
+ * LOCKING: None.
*
*/
@@ -1553,10 +1692,14 @@
}
/**
- * ata_bus_edd -
- * @ap:
+ * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command.
+ * @ap: Port to reset and probe
+ *
+ * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and
+ * probe the bus. Not often used these days.
*
* LOCKING:
+ * PCI/etc. bus probe sem.
*
*/
@@ -1633,8 +1776,8 @@
* the device is ATA or ATAPI.
*
* LOCKING:
- * Inherited from caller. Some functions called by this function
- * obtain the host_set lock.
+ * PCI/etc. bus probe sem.
+ * Obtains host_set lock.
*
* SIDE EFFECTS:
* Sets ATA_FLAG_PORT_DISABLED if bus reset fails.
@@ -1876,7 +2019,11 @@
* @xfer_mode_out: (output) SET FEATURES - XFER MODE code
* @xfer_shift_out: (output) bit shift that selects this mode
*
+ * Based on host and device capabilities, determine the
+ * maximum transfer mode that is amenable to all.
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*
* RETURNS:
* Zero on success, negative on error.
@@ -1909,7 +2056,11 @@
* @ap: Port associated with device @dev
* @dev: Device to which command will be sent
*
+ * Issue SET FEATURES - XFER MODE command to device @dev
+ * on port @ap.
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*/
static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
@@ -1947,10 +2098,13 @@
}
/**
- * ata_sg_clean -
- * @qc:
+ * ata_sg_clean - Unmap DMA memory associated with command
+ * @qc: Command containing DMA memory to be released
+ *
+ * Unmap all mapped DMA memory associated with this command.
*
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
*/
static void ata_sg_clean(struct ata_queued_cmd *qc)
@@ -1981,7 +2135,11 @@
* ata_fill_sg - Fill PCI IDE PRD table
* @qc: Metadata associated with taskfile to be transferred
*
+ * Fill PCI IDE PRD (scatter-gather) table with segments
+ * associated with the current disk command.
+ *
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
*
*/
static void ata_fill_sg(struct ata_queued_cmd *qc)
@@ -2028,7 +2186,13 @@
* ata_check_atapi_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
+ * Allow low-level driver to filter ATA PACKET commands, returning
+ * a status indicating whether or not it is OK to use DMA for the
+ * supplied PACKET command.
+ *
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ *
* RETURNS: 0 when ATAPI DMA can be used
* nonzero otherwise
*/
@@ -2046,6 +2210,8 @@
* ata_qc_prep - Prepare taskfile for submission
* @qc: Metadata associated with taskfile to be prepared
*
+ * Prepare ATA taskfile for submission.
+ *
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
@@ -2057,6 +2223,32 @@
ata_fill_sg(qc);
}
+/**
+ * ata_sg_init_one - Associate command with memory buffer
+ * @qc: Command to be associated
+ * @buf: Memory buffer
+ * @buflen: Length of memory buffer, in bytes.
+ *
+ * Initialize the data-related elements of queued_cmd @qc
+ * to point to a single memory buffer, @buf of byte length @buflen.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+
+
+/**
+ * ata_sg_init_one - Prepare a one-entry scatter-gather list.
+ * @qc: Queued command
+ * @buf: transfer buffer
+ * @buflen: length of buf
+ *
+ * Builds a single-entry scatter-gather list to initiate a
+ * transfer utilizing the specified buffer.
+ *
+ * LOCKING:
+ */
void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
{
struct scatterlist *sg;
@@ -2071,9 +2263,35 @@
sg = qc->sg;
sg->page = virt_to_page(buf);
sg->offset = (unsigned long) buf & ~PAGE_MASK;
- sg_dma_len(sg) = buflen;
+ sg->length = buflen;
}
+/**
+ * ata_sg_init - Associate command with scatter-gather table.
+ * @qc: Command to be associated
+ * @sg: Scatter-gather table.
+ * @n_elem: Number of elements in s/g table.
+ *
+ * Initialize the data-related elements of queued_cmd @qc
+ * to point to a scatter-gather table @sg, containing @n_elem
+ * elements.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+
+/**
+ * ata_sg_init - Assign a scatter gather list to a queued command
+ * @qc: Queued command
+ * @sg: Scatter-gather list
+ * @n_elem: length of sg list
+ *
+ * Attaches a scatter-gather list to a queued command.
+ *
+ * LOCKING:
+ */
+
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem)
{
@@ -2083,14 +2301,16 @@
}
/**
- * ata_sg_setup_one -
- * @qc:
+ * ata_sg_setup_one - DMA-map the memory buffer associated with a command.
+ * @qc: Command with memory buffer to be mapped.
+ *
+ * DMA-map the memory buffer associated with queued_cmd @qc.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
* RETURNS:
- *
+ * Zero on success, negative on error.
*/
static int ata_sg_setup_one(struct ata_queued_cmd *qc)
@@ -2101,11 +2321,12 @@
dma_addr_t dma_address;
dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt,
- sg_dma_len(sg), dir);
+ sg->length, dir);
if (dma_mapping_error(dma_address))
return -1;
sg_dma_address(sg) = dma_address;
+ sg_dma_len(sg) = sg->length;
DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg),
qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
@@ -2114,13 +2335,16 @@
}
/**
- * ata_sg_setup -
- * @qc:
+ * ata_sg_setup - DMA-map the scatter-gather table associated with a command.
+ * @qc: Command with scatter-gather table to be mapped.
+ *
+ * DMA-map the scatter-gather table associated with queued_cmd @qc.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
* RETURNS:
+ * Zero on success, negative on error.
*
*/
@@ -2150,6 +2374,7 @@
* @ap:
*
* LOCKING:
+ * None. (executing in kernel thread context)
*
* RETURNS:
*
@@ -2197,6 +2422,7 @@
* @ap:
*
* LOCKING:
+ * None. (executing in kernel thread context)
*/
static void ata_pio_complete (struct ata_port *ap)
@@ -2239,6 +2465,18 @@
ata_qc_complete(qc, drv_stat);
}
+
+/**
+ * swap_buf_le16 -
+ * @buf: Buffer to swap
+ * @buf_words: Number of 16-bit words in buffer.
+ *
+ * Swap halves of 16-bit words if needed to convert from
+ * little-endian byte order to native cpu byte order, or
+ * vice-versa.
+ *
+ * LOCKING:
+ */
void swap_buf_le16(u16 *buf, unsigned int buf_words)
{
#ifdef __BIG_ENDIAN
@@ -2310,7 +2548,7 @@
qc->cursect++;
qc->cursg_ofs++;
- if ((qc->cursg_ofs * ATA_SECT_SIZE) == sg_dma_len(&sg[qc->cursg])) {
+ if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) {
qc->cursg++;
qc->cursg_ofs = 0;
}
@@ -2347,7 +2585,7 @@
page = nth_page(page, (offset >> PAGE_SHIFT));
offset %= PAGE_SIZE;
- count = min(sg_dma_len(sg) - qc->cursg_ofs, bytes);
+ count = min(sg->length - qc->cursg_ofs, bytes);
/* don't cross page boundaries */
count = min(count, (unsigned int)PAGE_SIZE - offset);
@@ -2358,7 +2596,7 @@
qc->curbytes += count;
qc->cursg_ofs += count;
- if (qc->cursg_ofs == sg_dma_len(sg)) {
+ if (qc->cursg_ofs == sg->length) {
qc->cursg++;
qc->cursg_ofs = 0;
}
@@ -2371,7 +2609,7 @@
kunmap(page);
if (bytes) {
- if (qc->cursg_ofs < sg_dma_len(sg))
+ if (qc->cursg_ofs < sg->length)
goto next_page;
goto next_sg;
}
@@ -2414,6 +2652,7 @@
* @ap:
*
* LOCKING:
+ * None. (executing in kernel thread context)
*/
static void ata_pio_block(struct ata_port *ap)
@@ -2539,7 +2778,7 @@
ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
qc->dma_dir = DMA_FROM_DEVICE;
- memset(&qc->cdb, 0, sizeof(ap->cdb_len));
+ memset(&qc->cdb, 0, ap->cdb_len);
qc->cdb[0] = REQUEST_SENSE;
qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
@@ -2582,6 +2821,7 @@
* transaction completed successfully.
*
* LOCKING:
+ * Inherited from SCSI layer (none, can sleep)
*/
static void ata_qc_timeout(struct ata_queued_cmd *qc)
@@ -2691,6 +2931,7 @@
* @dev: Device from whom we request an available command structure
*
* LOCKING:
+ * None.
*/
static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
@@ -2716,6 +2957,7 @@
* @dev: Device from whom we request an available command structure
*
* LOCKING:
+ * None.
*/
struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
@@ -2780,6 +3022,7 @@
* in case something prevents using it.
*
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
*
*/
void ata_qc_free(struct ata_queued_cmd *qc)
@@ -2793,9 +3036,13 @@
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
- * @drv_stat: ATA status register contents
+ * @drv_stat: ATA Status register contents
+ *
+ * Indicate to the mid and upper layers that an ATA
+ * command has completed, with either an ok or not-ok status.
*
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
*
*/
@@ -2811,6 +3058,7 @@
/* call completion callback */
rc = qc->complete_fn(qc, drv_stat);
+ qc->flags &= ~ATA_QCFLAG_ACTIVE;
/* if callback indicates not to complete command (non-zero),
* return immediately
@@ -2890,6 +3138,7 @@
return -1;
}
+
/**
* ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
* @qc: command to issue to device
@@ -2899,6 +3148,8 @@
* classes called "protocols", and issuing each type of protocol
* is slightly different.
*
+ * May be used as the qc_issue() entry in ata_port_operations.
+ *
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
@@ -2956,7 +3207,7 @@
}
/**
- * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
*
* LOCKING:
@@ -3063,6 +3314,18 @@
ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
}
+
+/**
+ * ata_bmdma_start - Start a PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Writes the ATA_DMA_START flag to the DMA command register.
+ *
+ * May be used as the bmdma_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
void ata_bmdma_start(struct ata_queued_cmd *qc)
{
if (qc->ap->flags & ATA_FLAG_MMIO)
@@ -3071,6 +3334,20 @@
ata_bmdma_start_pio(qc);
}
+
+/**
+ * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Writes address of PRD table to device's PRD Table Address
+ * register, sets the DMA control register, and calls
+ * ops->exec_command() to start the transfer.
+ *
+ * May be used as the bmdma_setup() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
void ata_bmdma_setup(struct ata_queued_cmd *qc)
{
if (qc->ap->flags & ATA_FLAG_MMIO)
@@ -3079,6 +3356,19 @@
ata_bmdma_setup_pio(qc);
}
+
+/**
+ * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Clear interrupt and error flags in DMA status register.
+ *
+ * May be used as the irq_clear() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
void ata_bmdma_irq_clear(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_MMIO) {
@@ -3091,6 +3381,19 @@
}
+
+/**
+ * ata_bmdma_status - Read PCI IDE BMDMA status
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Read and return BMDMA status register.
+ *
+ * May be used as the bmdma_status() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
u8 ata_bmdma_status(struct ata_port *ap)
{
u8 host_stat;
@@ -3102,6 +3405,19 @@
return host_stat;
}
+
+/**
+ * ata_bmdma_stop - Stop PCI IDE BMDMA transfer
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Clears the ATA_DMA_START flag in the dma control register
+ *
+ * May be used as the bmdma_stop() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
void ata_bmdma_stop(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_MMIO) {
@@ -3201,13 +3517,18 @@
/**
* ata_interrupt - Default ATA host interrupt handler
- * @irq: irq line
- * @dev_instance: pointer to our host information structure
+ * @irq: irq line (unused)
+ * @dev_instance: pointer to our ata_host_set information structure
* @regs: unused
*
+ * Default interrupt handler for PCI IDE devices. Calls
+ * ata_host_intr() for each port that is not disabled.
+ *
* LOCKING:
+ * Obtains host_set lock during operation.
*
* RETURNS:
+ * IRQ_NONE or IRQ_HANDLED.
*
*/
@@ -3229,7 +3550,8 @@
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (!(qc->tf.ctl & ATA_NIEN)))
+ if (qc && (!(qc->tf.ctl & ATA_NIEN)) &&
+ (qc->flags & ATA_QCFLAG_ACTIVE))
handled |= ata_host_intr(ap, qc);
}
}
@@ -3299,6 +3621,19 @@
ata_qc_complete(qc, ATA_ERR);
}
+
+/**
+ * ata_port_start - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table.
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ */
+
int ata_port_start (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
@@ -3312,6 +3647,18 @@
return 0;
}
+
+/**
+ * ata_port_stop - Undo ata_port_start()
+ * @ap: Port to shut down
+ *
+ * Frees the PRD table.
+ *
+ * May be used as the port_stop() entry in ata_port_operations.
+ *
+ * LOCKING:
+ */
+
void ata_port_stop (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
@@ -3319,6 +3666,13 @@
dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
}
+void ata_host_stop (struct ata_host_set *host_set)
+{
+ if (host_set->mmio_base)
+ iounmap(host_set->mmio_base);
+}
+
+
/**
* ata_host_remove - Unregister SCSI host structure with upper layers
* @ap: Port to unregister
@@ -3347,7 +3701,11 @@
* @ent: Probe information provided by low-level driver
* @port_no: Port number associated with this ata_port
*
+ * Initialize a new ata_port structure, and its associated
+ * scsi_host.
+ *
* LOCKING:
+ * Inherited from caller.
*
*/
@@ -3402,9 +3760,13 @@
* @host_set: Collections of ports to which we add
* @port_no: Port number associated with this host
*
+ * Attach low-level ATA driver to system.
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*
* RETURNS:
+ * New ata_port on success, for NULL on error.
*
*/
@@ -3437,12 +3799,22 @@
}
/**
- * ata_device_add -
- * @ent:
+ * ata_device_add - Register hardware device with ATA and SCSI layers
+ * @ent: Probe information describing hardware device to be registered
+ *
+ * This function processes the information provided in the probe
+ * information struct @ent, allocates the necessary ATA and SCSI
+ * host information structures, initializes them, and registers
+ * everything with requisite kernel subsystems.
+ *
+ * This function requests irqs, probes the ATA bus, and probes
+ * the SCSI bus.
*
* LOCKING:
+ * PCI/etc. bus probe sem.
*
* RETURNS:
+ * Number of ports registered. Zero on error (no ports registered).
*
*/
@@ -3594,7 +3966,15 @@
/**
* ata_std_ports - initialize ioaddr with standard port offsets.
* @ioaddr: IO address structure to be initialized
+ *
+ * Utility function which initializes data_addr, error_addr,
+ * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
+ * device_addr, status_addr, and command_addr to standard offsets
+ * relative to cmd_addr.
+ *
+ * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
*/
+
void ata_std_ports(struct ata_ioports *ioaddr)
{
ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
@@ -3636,6 +4016,20 @@
return probe_ent;
}
+
+
+/**
+ * ata_pci_init_native_mode - Initialize native-mode driver
+ * @pdev: pci device to be initialized
+ * @port: array[2] of pointers to port info structures.
+ *
+ * Utility function which allocates and initializes an
+ * ata_probe_ent structure for a standard dual-port
+ * PIO-based IDE controller. The returned ata_probe_ent
+ * structure can be passed to ata_device_add(). The returned
+ * ata_probe_ent structure should then be freed with kfree().
+ */
+
#ifdef CONFIG_PCI
struct ata_probe_ent *
ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
@@ -3717,10 +4111,19 @@
* @port_info: Information from low-level host driver
* @n_ports: Number of ports attached to host controller
*
+ * This is a helper function which can be called from a driver's
+ * xxx_init_one() probe function if the hardware uses traditional
+ * IDE taskfile registers.
+ *
+ * This function calls pci_enable_device(), reserves its register
+ * regions, sets the dma mask, enables bus master mode, and calls
+ * ata_device_add()
+ *
* LOCKING:
* Inherited from PCI layer (may sleep).
*
* RETURNS:
+ * Zero on success, negative on errno-based value on error.
*
*/
@@ -3875,10 +4278,6 @@
}
free_irq(host_set->irq, host_set);
- if (host_set->ops->host_stop)
- host_set->ops->host_stop(host_set);
- if (host_set->mmio_base)
- iounmap(host_set->mmio_base);
for (i = 0; i < host_set->n_ports; i++) {
ap = host_set->ports[i];
@@ -3897,6 +4296,9 @@
scsi_host_put(ap->host);
}
+ if (host_set->ops->host_stop)
+ host_set->ops->host_stop(host_set);
+
kfree(host_set);
pci_release_regions(pdev);
@@ -3940,15 +4342,6 @@
#endif /* CONFIG_PCI */
-/**
- * ata_init -
- *
- * LOCKING:
- *
- * RETURNS:
- *
- */
-
static int __init ata_init(void)
{
ata_wq = create_workqueue("ata");
@@ -3994,6 +4387,7 @@
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_port_stop);
+EXPORT_SYMBOL_GPL(ata_host_stop);
EXPORT_SYMBOL_GPL(ata_interrupt);
EXPORT_SYMBOL_GPL(ata_qc_prep);
EXPORT_SYMBOL_GPL(ata_bmdma_setup);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 4c96df0..7a4adc4 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -347,7 +347,10 @@
*/
if ((dev->flags & ATA_DFLAG_LBA48) &&
((dev->flags & ATA_DFLAG_LOCK_SECTORS) == 0)) {
- sdev->host->max_sectors = 2048;
+ /*
+ * do not overwrite sdev->host->max_sectors, since
+ * other drives on this host may not support LBA48
+ */
blk_queue_max_sectors(sdev->request_queue, 2048);
}
}
@@ -944,7 +947,7 @@
}
/**
- * ata_scsiop_noop -
+ * ata_scsiop_noop - Command handler that simply returns success.
* @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 6518226..d90430b 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -26,7 +26,7 @@
#define __LIBATA_H__
#define DRV_NAME "libata"
-#define DRV_VERSION "1.10" /* must be exactly four chars */
+#define DRV_VERSION "1.11" /* must be exactly four chars */
struct ata_scsi_args {
u16 *id;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 5794482..3c97aa4 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -507,6 +507,7 @@
int ret, i;
unsigned int id, lun;
unsigned long serial;
+ unsigned long flags;
if (!CMD_SP(cmd))
return FAILED;
@@ -519,7 +520,7 @@
/* Check active list for command command. */
spin_unlock_irq(ha->host->host_lock);
- spin_lock(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
sp = ha->outstanding_cmds[i];
@@ -534,7 +535,7 @@
sp->state));
DEBUG3(qla2x00_print_scsi_cmd(cmd);)
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (qla2x00_abort_command(ha, sp)) {
DEBUG2(printk("%s(%ld): abort_command "
"mbx failed.\n", __func__, ha->host_no));
@@ -543,20 +544,19 @@
"mbx success.\n", __func__, ha->host_no));
ret = SUCCESS;
}
- spin_lock(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
break;
}
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Wait for the command to be returned. */
if (ret == SUCCESS) {
- spin_unlock(&ha->hardware_lock);
if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
qla_printk(KERN_ERR, ha,
"scsi(%ld:%d:%d): Abort handler timed out -- %lx "
"%x.\n", ha->host_no, id, lun, serial, ret);
}
- spin_lock(&ha->hardware_lock);
}
spin_lock_irq(ha->host->host_lock);
@@ -588,6 +588,7 @@
int status;
srb_t *sp;
struct scsi_cmnd *cmd;
+ unsigned long flags;
status = 0;
@@ -596,11 +597,11 @@
* array
*/
for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
- spin_lock(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
sp = ha->outstanding_cmds[cnt];
if (sp) {
cmd = sp->cmd;
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (cmd->device->id == t) {
if (!qla2x00_eh_wait_on_command(ha, cmd)) {
status = 1;
@@ -608,7 +609,7 @@
}
}
} else {
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
}
return (status);
@@ -740,6 +741,7 @@
int status;
srb_t *sp;
struct scsi_cmnd *cmd;
+ unsigned long flags;
status = 1;
@@ -748,17 +750,17 @@
* array
*/
for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
- spin_lock(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
sp = ha->outstanding_cmds[cnt];
if (sp) {
cmd = sp->cmd;
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
status = qla2x00_eh_wait_on_command(ha, cmd);
if (status == 0)
break;
}
else {
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
}
return (status);
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index 69009f8..b0403cc 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -329,6 +329,8 @@
host->host_desc->disable_hotplug(host_set);
kfree(host);
+
+ ata_host_stop(host_set);
}
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 19a13e3..b18c905 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -122,6 +122,7 @@
.scr_write = pdc_sata_scr_write,
.port_start = pdc_port_start,
.port_stop = pdc_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info pdc_port_info[] = {
@@ -151,6 +152,8 @@
static struct pci_device_id pdc_ata_pci_tbl[] = {
{ PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
+ { PCI_VENDOR_ID_PROMISE, 0x3571, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3375, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index dfd3621..1383e8a 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -536,6 +536,8 @@
writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
+
+ ata_host_stop(host_set);
}
static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index f0489dc..238580d 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -82,6 +82,7 @@
{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
{ 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
{ 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
{ } /* terminate list */
};
@@ -160,6 +161,7 @@
.scr_write = sil_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info sil_port_info[] = {
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index 5105ddd..e418b89 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -114,6 +114,7 @@
.scr_write = sis_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info sis_port_info = {
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 8d1a5d2..edef1fa 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -313,6 +313,7 @@
.scr_write = k2_sata_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base)
@@ -395,7 +396,7 @@
/* Clear a magic bit in SCR1 according to Darwin, those help
* some funky seagate drives (though so far, those were already
- * set by the firmware on the machines I had access to
+ * set by the firmware on the machines I had access to)
*/
writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000,
mmio_base + K2_SATA_SICR1_OFFSET);
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index 7011865..140cea0 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -245,6 +245,8 @@
iounmap(dimm_mmio);
kfree(hpriv);
+
+ ata_host_stop(host_set);
}
static int pdc_port_start(struct ata_port *ap)
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index 0bff4f4..a71fb54 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -113,6 +113,7 @@
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info uli_port_info = {
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 3a78306..f43183c 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -134,6 +134,7 @@
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info svia_port_info = {
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 2c28f0a..c5e09dc 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -21,6 +21,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -230,6 +231,7 @@
.scr_write = vsc_sata_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base)
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index cca7726..8d0d302 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1197,6 +1197,7 @@
if (!starget)
return ERR_PTR(-ENOMEM);
+ get_device(&starget->dev);
down(&shost->scan_mutex);
res = scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata);
if (res != SCSI_SCAN_LUN_PRESENT)
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 28966d0..67c6cc4 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -35,7 +35,7 @@
#define SPI_PRINTK(x, l, f, a...) dev_printk(l, &(x)->dev, f , ##a)
-#define SPI_NUM_ATTRS 10 /* increase this if you add attributes */
+#define SPI_NUM_ATTRS 13 /* increase this if you add attributes */
#define SPI_OTHER_ATTRS 1 /* Increase this if you add "always
* on" attributes */
#define SPI_HOST_ATTRS 1
@@ -219,8 +219,11 @@
struct scsi_target *starget = to_scsi_target(dev);
spi_period(starget) = -1; /* illegal value */
+ spi_min_period(starget) = 0;
spi_offset(starget) = 0; /* async */
+ spi_max_offset(starget) = 255;
spi_width(starget) = 0; /* narrow */
+ spi_max_width(starget) = 1;
spi_iu(starget) = 0; /* no IU */
spi_dt(starget) = 0; /* ST */
spi_qas(starget) = 0;
@@ -235,6 +238,34 @@
return 0;
}
+#define spi_transport_show_simple(field, format_string) \
+ \
+static ssize_t \
+show_spi_transport_##field(struct class_device *cdev, char *buf) \
+{ \
+ struct scsi_target *starget = transport_class_to_starget(cdev); \
+ struct spi_transport_attrs *tp; \
+ \
+ tp = (struct spi_transport_attrs *)&starget->starget_data; \
+ return snprintf(buf, 20, format_string, tp->field); \
+}
+
+#define spi_transport_store_simple(field, format_string) \
+ \
+static ssize_t \
+store_spi_transport_##field(struct class_device *cdev, const char *buf, \
+ size_t count) \
+{ \
+ int val; \
+ struct scsi_target *starget = transport_class_to_starget(cdev); \
+ struct spi_transport_attrs *tp; \
+ \
+ tp = (struct spi_transport_attrs *)&starget->starget_data; \
+ val = simple_strtoul(buf, NULL, 0); \
+ tp->field = val; \
+ return count; \
+}
+
#define spi_transport_show_function(field, format_string) \
\
static ssize_t \
@@ -261,6 +292,25 @@
struct spi_internal *i = to_spi_internal(shost->transportt); \
\
val = simple_strtoul(buf, NULL, 0); \
+ i->f->set_##field(starget, val); \
+ return count; \
+}
+
+#define spi_transport_store_max(field, format_string) \
+static ssize_t \
+store_spi_transport_##field(struct class_device *cdev, const char *buf, \
+ size_t count) \
+{ \
+ int val; \
+ struct scsi_target *starget = transport_class_to_starget(cdev); \
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); \
+ struct spi_internal *i = to_spi_internal(shost->transportt); \
+ struct spi_transport_attrs *tp \
+ = (struct spi_transport_attrs *)&starget->starget_data; \
+ \
+ val = simple_strtoul(buf, NULL, 0); \
+ if (val > tp->max_##field) \
+ val = tp->max_##field; \
i->f->set_##field(starget, val); \
return count; \
}
@@ -272,9 +322,24 @@
show_spi_transport_##field, \
store_spi_transport_##field);
+#define spi_transport_simple_attr(field, format_string) \
+ spi_transport_show_simple(field, format_string) \
+ spi_transport_store_simple(field, format_string) \
+static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR, \
+ show_spi_transport_##field, \
+ store_spi_transport_##field);
+
+#define spi_transport_max_attr(field, format_string) \
+ spi_transport_show_function(field, format_string) \
+ spi_transport_store_max(field, format_string) \
+ spi_transport_simple_attr(max_##field, format_string) \
+static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR, \
+ show_spi_transport_##field, \
+ store_spi_transport_##field);
+
/* The Parallel SCSI Tranport Attributes: */
-spi_transport_rd_attr(offset, "%d\n");
-spi_transport_rd_attr(width, "%d\n");
+spi_transport_max_attr(offset, "%d\n");
+spi_transport_max_attr(width, "%d\n");
spi_transport_rd_attr(iu, "%d\n");
spi_transport_rd_attr(dt, "%d\n");
spi_transport_rd_attr(qas, "%d\n");
@@ -300,26 +365,18 @@
/* Translate the period into ns according to the current spec
* for SDTR/PPR messages */
-static ssize_t show_spi_transport_period(struct class_device *cdev, char *buf)
-
+static ssize_t
+show_spi_transport_period_helper(struct class_device *cdev, char *buf,
+ int period)
{
- struct scsi_target *starget = transport_class_to_starget(cdev);
- struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
- struct spi_transport_attrs *tp;
int len, picosec;
- struct spi_internal *i = to_spi_internal(shost->transportt);
- tp = (struct spi_transport_attrs *)&starget->starget_data;
-
- if (i->f->get_period)
- i->f->get_period(starget);
-
- if (tp->period < 0 || tp->period > 0xff) {
+ if (period < 0 || period > 0xff) {
picosec = -1;
- } else if (tp->period <= SPI_STATIC_PPR) {
- picosec = ppr_to_ps[tp->period];
+ } else if (period <= SPI_STATIC_PPR) {
+ picosec = ppr_to_ps[period];
} else {
- picosec = tp->period * 4000;
+ picosec = period * 4000;
}
if (picosec == -1) {
@@ -334,12 +391,9 @@
}
static ssize_t
-store_spi_transport_period(struct class_device *cdev, const char *buf,
- size_t count)
+store_spi_transport_period_helper(struct class_device *cdev, const char *buf,
+ size_t count, int *periodp)
{
- struct scsi_target *starget = transport_class_to_starget(cdev);
- struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
- struct spi_internal *i = to_spi_internal(shost->transportt);
int j, picosec, period = -1;
char *endp;
@@ -368,15 +422,79 @@
if (period > 0xff)
period = 0xff;
- i->f->set_period(starget, period);
+ *periodp = period;
return count;
}
+static ssize_t
+show_spi_transport_period(struct class_device *cdev, char *buf)
+{
+ struct scsi_target *starget = transport_class_to_starget(cdev);
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct spi_internal *i = to_spi_internal(shost->transportt);
+ struct spi_transport_attrs *tp =
+ (struct spi_transport_attrs *)&starget->starget_data;
+
+ if (i->f->get_period)
+ i->f->get_period(starget);
+
+ return show_spi_transport_period_helper(cdev, buf, tp->period);
+}
+
+static ssize_t
+store_spi_transport_period(struct class_device *cdev, const char *buf,
+ size_t count)
+{
+ struct scsi_target *starget = transport_class_to_starget(cdev);
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct spi_internal *i = to_spi_internal(shost->transportt);
+ struct spi_transport_attrs *tp =
+ (struct spi_transport_attrs *)&starget->starget_data;
+ int period, retval;
+
+ retval = store_spi_transport_period_helper(cdev, buf, count, &period);
+
+ if (period < tp->min_period)
+ period = tp->min_period;
+
+ i->f->set_period(starget, period);
+
+ return retval;
+}
+
static CLASS_DEVICE_ATTR(period, S_IRUGO | S_IWUSR,
show_spi_transport_period,
store_spi_transport_period);
+static ssize_t
+show_spi_transport_min_period(struct class_device *cdev, char *buf)
+{
+ struct scsi_target *starget = transport_class_to_starget(cdev);
+ struct spi_transport_attrs *tp =
+ (struct spi_transport_attrs *)&starget->starget_data;
+
+ return show_spi_transport_period_helper(cdev, buf, tp->min_period);
+}
+
+static ssize_t
+store_spi_transport_min_period(struct class_device *cdev, const char *buf,
+ size_t count)
+{
+ struct scsi_target *starget = transport_class_to_starget(cdev);
+ struct spi_transport_attrs *tp =
+ (struct spi_transport_attrs *)&starget->starget_data;
+
+ return store_spi_transport_period_helper(cdev, buf, count,
+ &tp->min_period);
+}
+
+
+static CLASS_DEVICE_ATTR(min_period, S_IRUGO | S_IWUSR,
+ show_spi_transport_min_period,
+ store_spi_transport_min_period);
+
+
static ssize_t show_spi_host_signalling(struct class_device *cdev, char *buf)
{
struct Scsi_Host *shost = transport_class_to_shost(cdev);
@@ -642,6 +760,7 @@
{
struct spi_internal *i = to_spi_internal(sreq->sr_host->transportt);
struct scsi_device *sdev = sreq->sr_device;
+ struct scsi_target *starget = sdev->sdev_target;
int len = sdev->inquiry_len;
/* first set us up for narrow async */
DV_SET(offset, 0);
@@ -655,9 +774,11 @@
}
/* test width */
- if (i->f->set_width && sdev->wdtr) {
+ if (i->f->set_width && spi_max_width(starget) && sdev->wdtr) {
i->f->set_width(sdev->sdev_target, 1);
+ printk("WIDTH IS %d\n", spi_max_width(starget));
+
if (spi_dv_device_compare_inquiry(sreq, buffer,
buffer + len,
DV_LOOPS)
@@ -684,8 +805,8 @@
retry:
/* now set up to the maximum */
- DV_SET(offset, 255);
- DV_SET(period, 1);
+ DV_SET(offset, spi_max_offset(starget));
+ DV_SET(period, spi_min_period(starget));
if (len == 0) {
SPI_PRINTK(sdev->sdev_target, KERN_INFO, "Domain Validation skipping write tests\n");
@@ -892,6 +1013,16 @@
if (i->f->show_##field) \
count++
+#define SETUP_RELATED_ATTRIBUTE(field, rel_field) \
+ i->private_attrs[count] = class_device_attr_##field; \
+ if (!i->f->set_##rel_field) { \
+ i->private_attrs[count].attr.mode = S_IRUGO; \
+ i->private_attrs[count].store = NULL; \
+ } \
+ i->attrs[count] = &i->private_attrs[count]; \
+ if (i->f->show_##rel_field) \
+ count++
+
#define SETUP_HOST_ATTRIBUTE(field) \
i->private_host_attrs[count] = class_device_attr_##field; \
if (!i->f->set_##field) { \
@@ -975,8 +1106,11 @@
i->f = ft;
SETUP_ATTRIBUTE(period);
+ SETUP_RELATED_ATTRIBUTE(min_period, period);
SETUP_ATTRIBUTE(offset);
+ SETUP_RELATED_ATTRIBUTE(max_offset, offset);
SETUP_ATTRIBUTE(width);
+ SETUP_RELATED_ATTRIBUTE(max_width, width);
SETUP_ATTRIBUTE(iu);
SETUP_ATTRIBUTE(dt);
SETUP_ATTRIBUTE(qas);
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 33fbda7..0b10169 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -126,18 +126,8 @@
flag = TTY_FRAME;
}
- if ((rxs & port->ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((rxs & RXSTAT_OVERRUN) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag);
+
status = *CSR_UARTFLG;
}
tty_flip_buffer_push(tty);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0d93586..30e8beb 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -682,8 +682,6 @@
* from EXCR1. Switch back to bank 0, change it in MCR. Then
* switch back to bank 2, read it from EXCR1 again and check
* it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
- * On PowerPC we don't want to change baud_base, as we have
- * a number of different divisors. -- Tom Rini
*/
serial_outp(up, UART_LCR, 0);
status1 = serial_in(up, UART_MCR);
@@ -699,16 +697,25 @@
serial_outp(up, UART_MCR, status1);
if ((status2 ^ status1) & UART_MCR_LOOP) {
-#ifndef CONFIG_PPC
+ unsigned short quot;
+
serial_outp(up, UART_LCR, 0xE0);
+
+ quot = serial_inp(up, UART_DLM) << 8;
+ quot += serial_inp(up, UART_DLL);
+ quot <<= 3;
+
status1 = serial_in(up, 0x04); /* EXCR1 */
status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
serial_outp(up, 0x04, status1);
- serial_outp(up, UART_LCR, 0);
- up->port.uartclk = 921600*16;
-#endif
+
+ serial_outp(up, UART_DLL, quot & 0xff);
+ serial_outp(up, UART_DLM, quot >> 8);
+ serial_outp(up, UART_LCR, 0);
+
+ up->port.uartclk = 921600*16;
up->port.type = PORT_NS16550A;
up->capabilities |= UART_NATSEMI;
return;
@@ -1122,18 +1129,9 @@
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
- if ((lsr & up->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((lsr & UART_LSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+
+ uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
+
ignore_char:
lsr = serial_inp(up, UART_LSR);
} while ((lsr & UART_LSR_DR) && (max_count-- > 0));
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index f2a5e29..2884b31 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -198,18 +198,8 @@
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
- if ((rsr & port->ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((rsr & UART01x_RSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(port, rsr, UART01x_RSR_OE, ch, flag);
+
ignore_char:
status = UART_GET_FR(port);
}
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index d5cbef3..7db88ee 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -163,18 +163,8 @@
if (uart_handle_sysrq_char(&uap->port, ch, regs))
goto ignore_char;
- if ((rsr & uap->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((rsr & UART01x_RSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
+
ignore_char:
status = readw(uap->port.membase + UART01x_FR);
}
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 6242f30..e92522b 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -143,10 +143,7 @@
* CHECK: does overrun affect the current character?
* ASSUMPTION: it does not.
*/
- if ((ch & port->ignore_status_mask & ~RXSTAT_OVERRUN) == 0)
- tty_insert_flip_char(tty, ch, flg);
- if ((ch & ~port->ignore_status_mask & RXSTAT_OVERRUN) == 0)
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ uart_insert_char(port, ch, UARTDR_OVERR, ch, flg);
ignore_char:
status = clps_readl(SYSFLG(port));
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 51d8a49..9dc151d 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -161,20 +161,12 @@
else if (*status & UART_LSR_FE)
flag = TTY_FRAME;
}
+
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
- if ((*status & up->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((*status & UART_LSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+
+ uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
+
ignore_char:
*status = serial_in(up, UART_LSR);
} while ((*status & UART_LSR_DR) && (max_count-- > 0));
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 435750d..2a9f7ad 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -394,20 +394,7 @@
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
- if ((uerstat & port->ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
-
- if ((uerstat & S3C2410_UERSTAT_OVERRUN) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
-
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, ch, flag);
ignore_char:
continue;
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 157218b..22565a6 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -237,10 +237,7 @@
if (uart_handle_sysrq_char(&sport->port, ch, regs))
goto ignore_char;
- if ((status & port->ignore_status_mask & ~UTSR1_TO_SM(UTSR1_ROR)) == 0)
- tty_insert_flip_char(tty, ch, flg);
- if (status & ~port->ignore_status_mask & UTSR1_TO_SM(UTSR1_ROR))
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ uart_insert_char(&sport->port, status, UTSR1_TO_SM(UTSR1_ROR), ch, flg);
ignore_char:
status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 6eeb48f..0d7b65f 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -661,10 +661,10 @@
/* Is this a multiport card? */
tuple->DesiredTuple = CISTPL_MANFID;
if (first_tuple(handle, tuple, parse) == CS_SUCCESS) {
- info->manfid = le16_to_cpu(buf[0]);
+ info->manfid = parse->manfid.manf;
for (i = 0; i < MULTI_COUNT; i++)
if ((info->manfid == multi_id[i].manfid) &&
- (le16_to_cpu(buf[1]) == multi_id[i].prodid))
+ (parse->manfid.card == multi_id[i].prodid))
break;
if (i < MULTI_COUNT)
info->multi = multi_id[i].multi;
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index 85cfa08..56f269b 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -190,18 +190,7 @@
if (uart_handle_sysrq_char (port, (unsigned char) data, regs))
continue;
- if ((data & port->ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, data, flag);
- }
- if ((data & RxOverrunError)
- && tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(port, data, RxOverrunError, data, flag);
}
tty_flip_buffer_push (tty);
return;
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 37b2ef2..3f1051a 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -350,18 +350,9 @@
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
- if ((disr & up->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((disr & TXX9_SIDISR_UOER) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+
+ uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag);
+
ignore_char:
disr = sio_in(up, TXX9_SIDISR);
} while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0));
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 39b788d..10e2990 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -61,6 +61,16 @@
unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */
unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */
int type; /* SAB82532 version */
+
+ /* Setting configuration bits while the transmitter is active
+ * can cause garbage characters to get emitted by the chip.
+ * Therefore, we cache such writes here and do the real register
+ * write the next time the transmitter becomes idle.
+ */
+ unsigned int cached_ebrg;
+ unsigned char cached_mode;
+ unsigned char cached_pvr;
+ unsigned char cached_dafo;
};
/*
@@ -236,6 +246,7 @@
}
static void sunsab_stop_tx(struct uart_port *, unsigned int);
+static void sunsab_tx_idle(struct uart_sunsab_port *);
static void transmit_chars(struct uart_sunsab_port *up,
union sab82532_irq_status *stat)
@@ -258,6 +269,7 @@
return;
set_bit(SAB82532_XPR, &up->irqflags);
+ sunsab_tx_idle(up);
if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
up->interrupt_mask1 |= SAB82532_IMR1_XPR;
@@ -397,21 +409,21 @@
struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
if (mctrl & TIOCM_RTS) {
- writeb(readb(&up->regs->rw.mode) & ~SAB82532_MODE_FRTS,
- &up->regs->rw.mode);
- writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
- &up->regs->rw.mode);
+ up->cached_mode &= ~SAB82532_MODE_FRTS;
+ up->cached_mode |= SAB82532_MODE_RTS;
} else {
- writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS,
- &up->regs->rw.mode);
- writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
- &up->regs->rw.mode);
+ up->cached_mode |= (SAB82532_MODE_FRTS |
+ SAB82532_MODE_RTS);
}
if (mctrl & TIOCM_DTR) {
- writeb(readb(&up->regs->rw.pvr) & ~(up->pvr_dtr_bit), &up->regs->rw.pvr);
+ up->cached_pvr &= ~(up->pvr_dtr_bit);
} else {
- writeb(readb(&up->regs->rw.pvr) | up->pvr_dtr_bit, &up->regs->rw.pvr);
+ up->cached_pvr |= up->pvr_dtr_bit;
}
+
+ set_bit(SAB82532_REGS_PENDING, &up->irqflags);
+ if (test_bit(SAB82532_XPR, &up->irqflags))
+ sunsab_tx_idle(up);
}
/* port->lock is not held. */
@@ -450,6 +462,25 @@
}
/* port->lock held by caller. */
+static void sunsab_tx_idle(struct uart_sunsab_port *up)
+{
+ if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) {
+ u8 tmp;
+
+ clear_bit(SAB82532_REGS_PENDING, &up->irqflags);
+ writeb(up->cached_mode, &up->regs->rw.mode);
+ writeb(up->cached_pvr, &up->regs->rw.pvr);
+ writeb(up->cached_dafo, &up->regs->w.dafo);
+
+ writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr);
+ tmp = readb(&up->regs->rw.ccr2);
+ tmp &= ~0xc0;
+ tmp |= (up->cached_ebrg >> 2) & 0xc0;
+ writeb(tmp, &up->regs->rw.ccr2);
+ }
+}
+
+/* port->lock held by caller. */
static void sunsab_start_tx(struct uart_port *port, unsigned int tty_start)
{
struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
@@ -517,12 +548,16 @@
spin_lock_irqsave(&up->port.lock, flags);
- val = readb(&up->regs->rw.dafo);
+ val = up->cached_dafo;
if (break_state)
val |= SAB82532_DAFO_XBRK;
else
val &= ~SAB82532_DAFO_XBRK;
- writeb(val, &up->regs->rw.dafo);
+ up->cached_dafo = val;
+
+ set_bit(SAB82532_REGS_PENDING, &up->irqflags);
+ if (test_bit(SAB82532_XPR, &up->irqflags))
+ sunsab_tx_idle(up);
spin_unlock_irqrestore(&up->port.lock, flags);
}
@@ -566,8 +601,9 @@
SAB82532_CCR2_TOE, &up->regs->w.ccr2);
writeb(0, &up->regs->w.ccr3);
writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4);
- writeb(SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
- SAB82532_MODE_RAC, &up->regs->w.mode);
+ up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
+ SAB82532_MODE_RAC);
+ writeb(up->cached_mode, &up->regs->w.mode);
writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
tmp = readb(&up->regs->rw.ccr0);
@@ -598,7 +634,6 @@
{
struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
unsigned long flags;
- unsigned char tmp;
spin_lock_irqsave(&up->port.lock, flags);
@@ -609,14 +644,13 @@
writeb(up->interrupt_mask1, &up->regs->w.imr1);
/* Disable break condition */
- tmp = readb(&up->regs->rw.dafo);
- tmp &= ~SAB82532_DAFO_XBRK;
- writeb(tmp, &up->regs->rw.dafo);
+ up->cached_dafo = readb(&up->regs->rw.dafo);
+ up->cached_dafo &= ~SAB82532_DAFO_XBRK;
+ writeb(up->cached_dafo, &up->regs->rw.dafo);
/* Disable Receiver */
- tmp = readb(&up->regs->rw.mode);
- tmp &= ~SAB82532_MODE_RAC;
- writeb(tmp, &up->regs->rw.mode);
+ up->cached_mode &= ~SAB82532_MODE_RAC;
+ writeb(up->cached_mode, &up->regs->rw.mode);
/*
* XXX FIXME
@@ -685,7 +719,6 @@
unsigned int iflag, unsigned int baud,
unsigned int quot)
{
- unsigned int ebrg;
unsigned char dafo;
int bits, n, m;
@@ -714,10 +747,11 @@
} else {
dafo |= SAB82532_DAFO_PAR_EVEN;
}
+ up->cached_dafo = dafo;
calc_ebrg(baud, &n, &m);
- ebrg = n | (m << 6);
+ up->cached_ebrg = n | (m << 6);
up->tec_timeout = (10 * 1000000) / baud;
up->cec_timeout = up->tec_timeout >> 2;
@@ -770,16 +804,13 @@
uart_update_timeout(&up->port, cflag,
(up->port.uartclk / (16 * quot)));
- /* Now bang the new settings into the chip. */
- sunsab_cec_wait(up);
- sunsab_tec_wait(up);
- writeb(dafo, &up->regs->w.dafo);
- writeb(ebrg & 0xff, &up->regs->w.bgr);
- writeb((readb(&up->regs->rw.ccr2) & ~0xc0) | ((ebrg >> 2) & 0xc0),
- &up->regs->rw.ccr2);
-
- writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RAC, &up->regs->rw.mode);
-
+ /* Now schedule a register update when the chip's
+ * transmitter is idle.
+ */
+ up->cached_mode |= SAB82532_MODE_RAC;
+ set_bit(SAB82532_REGS_PENDING, &up->irqflags);
+ if (test_bit(SAB82532_XPR, &up->irqflags))
+ sunsab_tx_idle(up);
}
/* port->lock is not held. */
@@ -1084,11 +1115,13 @@
up->pvr_dsr_bit = (1 << 3);
up->pvr_dtr_bit = (1 << 2);
}
- writeb((1 << 1) | (1 << 2) | (1 << 4), &up->regs->w.pvr);
- writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS,
- &up->regs->rw.mode);
- writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
- &up->regs->rw.mode);
+ up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4);
+ writeb(up->cached_pvr, &up->regs->w.pvr);
+ up->cached_mode = readb(&up->regs->rw.mode);
+ up->cached_mode |= SAB82532_MODE_FRTS;
+ writeb(up->cached_mode, &up->regs->rw.mode);
+ up->cached_mode |= SAB82532_MODE_RTS;
+ writeb(up->cached_mode, &up->regs->rw.mode);
up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT;
up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT;
diff --git a/drivers/serial/sunsab.h b/drivers/serial/sunsab.h
index 686086f..b78e1f7 100644
--- a/drivers/serial/sunsab.h
+++ b/drivers/serial/sunsab.h
@@ -126,6 +126,7 @@
/* irqflags bits */
#define SAB82532_ALLS 0x00000001
#define SAB82532_XPR 0x00000002
+#define SAB82532_REGS_PENDING 0x00000004
/* RFIFO Status Byte */
#define SAB82532_RSTAT_PE 0x80
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 3078861..5d2ceb6 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -412,10 +412,8 @@
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
- if ((lsr & port->ignore_status_mask) == 0)
- tty_insert_flip_char(tty, ch, flag);
- if ((lsr & UART_LSR_OE) && (tty->flip.count < TTY_FLIPBUF_SIZE))
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+ uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
ignore_char:
lsr = siu_read(port, UART_LSR);
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 233f922..2a1697b 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -386,6 +386,8 @@
if (instance->u.atm_dev->signal != ATM_PHY_SIG_LOST) {
instance->u.atm_dev->signal = ATM_PHY_SIG_LOST;
printk(KERN_NOTICE "ADSL line is down\n");
+ /* It'll never resync again unless we ask it to... */
+ speedtch_start_synchro(instance);
}
break;
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index ec9b3bd..4d0c9e6 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -286,6 +286,37 @@
}
static DEVICE_ATTR(interface, S_IRUGO, show_interface_string, NULL);
+static ssize_t show_modalias(struct device *dev, char *buf)
+{
+ struct usb_interface *intf;
+ struct usb_device *udev;
+ int len;
+
+ intf = to_usb_interface(dev);
+ udev = interface_to_usbdev(intf);
+
+ len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct),
+ le16_to_cpu(udev->descriptor.bcdDevice),
+ udev->descriptor.bDeviceClass,
+ udev->descriptor.bDeviceSubClass,
+ udev->descriptor.bDeviceProtocol);
+ buf += len;
+
+ if (udev->descriptor.bDeviceClass == 0) {
+ struct usb_host_interface *alt = intf->cur_altsetting;
+
+ return len + sprintf(buf, "%02Xisc%02Xip%02X\n",
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol);
+ } else {
+ return len + sprintf(buf, "*isc*ip*\n");
+ }
+}
+static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
+
static struct attribute *intf_attrs[] = {
&dev_attr_bInterfaceNumber.attr,
&dev_attr_bAlternateSetting.attr,
@@ -293,6 +324,7 @@
&dev_attr_bInterfaceClass.attr,
&dev_attr_bInterfaceSubClass.attr,
&dev_attr_bInterfaceProtocol.attr,
+ &dev_attr_modalias.attr,
NULL,
};
static struct attribute_group intf_attr_grp = {
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 3196c32..19e598c 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -124,3 +124,14 @@
To compile this driver as a module, choose M here: the
module will be called sl811-hcd.
+config USB_SL811_CS
+ tristate "CF/PCMCIA support for SL811HS HCD"
+ depends on USB_SL811_HCD && PCMCIA
+ default N
+ help
+ Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
+ REX-CFU1U CF card (often used with PDAs). If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called "sl811_cs".
+
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index a574ca0..5dbd3e7 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -7,4 +7,5 @@
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
+obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 02fefab..429330b 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -72,6 +72,7 @@
}
/* turn off now-idle HC */
+ del_timer_sync (&ehci->watchdog);
ehci_halt (ehci);
hcd->state = HC_STATE_SUSPENDED;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index a374b76..99d43f7 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -2,8 +2,8 @@
* SL811HS HCD (Host Controller Driver) for USB.
*
* Copyright (C) 2004 Psion Teklogix (for NetBook PRO)
- * Copyright (C) 2004 David Brownell
- *
+ * Copyright (C) 2004-2005 David Brownell
+ *
* Periodic scheduling is based on Roman's OHCI code
* Copyright (C) 1999 Roman Weissgaerber
*
@@ -15,7 +15,7 @@
* For documentation, see the SL811HS spec and the "SL811HS Embedded Host"
* document (providing significant pieces missing from that spec); plus
* the SL811S spec if you want peripheral side info.
- */
+ */
/*
* Status: Passed basic stress testing, works with hubs, mice, keyboards,
@@ -67,7 +67,7 @@
MODULE_DESCRIPTION("SL811HS USB Host Controller Driver");
MODULE_LICENSE("GPL");
-#define DRIVER_VERSION "15 Dec 2004"
+#define DRIVER_VERSION "19 May 2005"
#ifndef DEBUG
@@ -121,6 +121,10 @@
/* reset as thoroughly as we can */
if (sl811->board && sl811->board->reset)
sl811->board->reset(hcd->self.controller);
+ else {
+ sl811_write(sl811, SL11H_CTLREG1, SL11H_CTL1MASK_SE0);
+ mdelay(20);
+ }
sl811_write(sl811, SL11H_IRQ_ENABLE, 0);
sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
@@ -443,6 +447,7 @@
spin_lock(&urb->lock);
if (urb->status == -EINPROGRESS)
urb->status = status;
+ urb->hcpriv = NULL;
spin_unlock(&urb->lock);
spin_unlock(&sl811->lock);
@@ -472,7 +477,7 @@
if (*prev)
*prev = ep->next;
sl811->load[i] -= ep->load;
- }
+ }
ep->branch = PERIODIC_SIZE;
sl811->periodic_count--;
sl811_to_hcd(sl811)->self.bandwidth_allocated
@@ -661,9 +666,9 @@
#ifdef QUIRK2
/* this may no longer be necessary ... */
- if (irqstat == 0 && ret == IRQ_NONE) {
+ if (irqstat == 0) {
irqstat = checkdone(sl811);
- if (irqstat /* && irq != ~0 */ )
+ if (irqstat)
sl811->stat_lost++;
}
#endif
@@ -722,7 +727,8 @@
if (sl811->active_a) {
sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0);
finish_request(sl811, sl811->active_a,
- container_of(sl811->active_a->hep->urb_list.next,
+ container_of(sl811->active_a
+ ->hep->urb_list.next,
struct urb, urb_list),
NULL, -ESHUTDOWN);
sl811->active_a = NULL;
@@ -731,7 +737,8 @@
if (sl811->active_b) {
sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0);
finish_request(sl811, sl811->active_b,
- container_of(sl811->active_b->hep->urb_list.next,
+ container_of(sl811->active_b
+ ->hep->urb_list.next,
struct urb, urb_list),
NULL, -ESHUTDOWN);
sl811->active_b = NULL;
@@ -761,7 +768,7 @@
goto retry;
}
- if (sl811->periodic_count == 0 && list_empty(&sl811->async))
+ if (sl811->periodic_count == 0 && list_empty(&sl811->async))
sofirq_off(sl811);
sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable);
@@ -796,7 +803,7 @@
}
if (j < PERIODIC_SIZE)
continue;
- branch = i;
+ branch = i;
}
}
return branch;
@@ -890,6 +897,7 @@
break;
}
+ ep->hep = hep;
hep->hcpriv = ep;
}
@@ -961,15 +969,16 @@
static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
{
struct sl811 *sl811 = hcd_to_sl811(hcd);
- struct usb_host_endpoint *hep = urb->hcpriv;
+ struct usb_host_endpoint *hep;
unsigned long flags;
struct sl811h_ep *ep;
int retval = 0;
- if (!hep)
- return -EINVAL;
-
spin_lock_irqsave(&sl811->lock, flags);
+ hep = urb->hcpriv;
+ if (!hep)
+ goto fail;
+
ep = hep->hcpriv;
if (ep) {
/* finish right away if this urb can't be active ...
@@ -1017,6 +1026,7 @@
VDBG("dequeue, urb %p active %s; wait4irq\n", urb,
(sl811->active_a == ep) ? "A" : "B");
} else
+fail:
retval = -EINVAL;
spin_unlock_irqrestore(&sl811->lock, flags);
return retval;
@@ -1576,6 +1586,9 @@
if (sl811->board && sl811->board->power)
hub_set_power_budget(udev, sl811->board->power * 2);
+ /* enable power and interupts */
+ port_power(sl811, 1);
+
return 0;
}
@@ -1618,7 +1631,7 @@
/*-------------------------------------------------------------------------*/
-static int __init_or_module
+static int __devexit
sl811h_remove(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
@@ -1631,21 +1644,20 @@
remove_debug_file(sl811);
usb_remove_hcd(hcd);
- iounmap(sl811->data_reg);
+ /* some platforms may use IORESOURCE_IO */
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- release_mem_region(res->start, 1);
+ if (res)
+ iounmap(sl811->data_reg);
- iounmap(sl811->addr_reg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, 1);
+ if (res)
+ iounmap(sl811->addr_reg);
usb_put_hcd(hcd);
return 0;
}
-#define resource_len(r) (((r)->end - (r)->start) + 1)
-
-static int __init
+static int __devinit
sl811h_probe(struct device *dev)
{
struct usb_hcd *hcd;
@@ -1656,7 +1668,7 @@
void __iomem *addr_reg;
void __iomem *data_reg;
int retval;
- u8 tmp;
+ u8 tmp, ioaddr = 0;
/* basic sanity checks first. board-specific init logic should
* have initialized these three resources and probably board
@@ -1664,13 +1676,8 @@
* minimal sanity checking.
*/
pdev = container_of(dev, struct platform_device, dev);
- if (pdev->num_resources < 3)
- return -ENODEV;
-
- addr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
irq = platform_get_irq(pdev, 0);
- if (!addr || !data || irq < 0)
+ if (pdev->num_resources < 3 || irq < 0)
return -ENODEV;
/* refuse to confuse usbcore */
@@ -1679,24 +1686,31 @@
return -EINVAL;
}
- if (!request_mem_region(addr->start, 1, hcd_name)) {
- retval = -EBUSY;
- goto err1;
- }
- addr_reg = ioremap(addr->start, resource_len(addr));
- if (addr_reg == NULL) {
- retval = -ENOMEM;
- goto err2;
- }
+ /* the chip may be wired for either kind of addressing */
+ addr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ retval = -EBUSY;
+ if (!addr || !data) {
+ addr = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ data = platform_get_resource(pdev, IORESOURCE_IO, 1);
+ if (!addr || !data)
+ return -ENODEV;
+ ioaddr = 1;
- if (!request_mem_region(data->start, 1, hcd_name)) {
- retval = -EBUSY;
- goto err3;
- }
- data_reg = ioremap(data->start, resource_len(addr));
- if (data_reg == NULL) {
- retval = -ENOMEM;
- goto err4;
+ addr_reg = (void __iomem *) addr->start;
+ data_reg = (void __iomem *) data->start;
+ } else {
+ addr_reg = ioremap(addr->start, 1);
+ if (addr_reg == NULL) {
+ retval = -ENOMEM;
+ goto err2;
+ }
+
+ data_reg = ioremap(data->start, 1);
+ if (data_reg == NULL) {
+ retval = -ENOMEM;
+ goto err4;
+ }
}
/* allocate and initialize hcd */
@@ -1737,12 +1751,14 @@
goto err6;
}
- /* sl811s would need a different handler for this irq */
-#ifdef CONFIG_ARM
- /* Cypress docs say the IRQ is IRQT_HIGH ... */
- set_irq_type(irq, IRQT_RISING);
-#endif
- retval = usb_add_hcd(hcd, irq, SA_INTERRUPT);
+ /* The chip's IRQ is level triggered, active high. A requirement
+ * for platform device setup is to cope with things like signal
+ * inverters (e.g. CF is active low) or working only with edge
+ * triggers (e.g. most ARM CPUs). Initial driver stress testing
+ * was on a system with single edge triggering, so most sorts of
+ * triggering arrangement should work.
+ */
+ retval = usb_add_hcd(hcd, irq, SA_INTERRUPT | SA_SHIRQ);
if (retval != 0)
goto err6;
@@ -1752,14 +1768,12 @@
err6:
usb_put_hcd(hcd);
err5:
- iounmap(data_reg);
+ if (!ioaddr)
+ iounmap(data_reg);
err4:
- release_mem_region(data->start, 1);
- err3:
- iounmap(addr_reg);
+ if (!ioaddr)
+ iounmap(addr_reg);
err2:
- release_mem_region(addr->start, 1);
- err1:
DBG("init error, %d\n", retval);
return retval;
}
@@ -1767,7 +1781,7 @@
#ifdef CONFIG_PM
/* for this device there's no useful distinction between the controller
- * and its root hub, except that the root hub only gets direct PM calls
+ * and its root hub, except that the root hub only gets direct PM calls
* when CONFIG_USB_SUSPEND is enabled.
*/
@@ -1821,20 +1835,22 @@
#endif
-static struct device_driver sl811h_driver = {
+/* this driver is exported so sl811_cs can depend on it */
+struct device_driver sl811h_driver = {
.name = (char *) hcd_name,
.bus = &platform_bus_type,
.probe = sl811h_probe,
- .remove = sl811h_remove,
+ .remove = __devexit_p(sl811h_remove),
.suspend = sl811h_suspend,
.resume = sl811h_resume,
};
+EXPORT_SYMBOL(sl811h_driver);
/*-------------------------------------------------------------------------*/
-
-static int __init sl811h_init(void)
+
+static int __init sl811h_init(void)
{
if (usb_disabled())
return -ENODEV;
@@ -1844,8 +1860,8 @@
}
module_init(sl811h_init);
-static void __exit sl811h_cleanup(void)
-{
+static void __exit sl811h_cleanup(void)
+{
driver_unregister(&sl811h_driver);
}
module_exit(sl811h_cleanup);
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
new file mode 100644
index 0000000..6e17326
--- /dev/null
+++ b/drivers/usb/host/sl811_cs.c
@@ -0,0 +1,442 @@
+/*
+ * PCMCIA driver for SL811HS (as found in REX-CFU1U)
+ * Filename: sl811_cs.c
+ * Author: Yukio Yamamoto
+ *
+ * Port to sl811-hcd and 2.6.x by
+ * Botond Botyanszki <boti@rocketmail.com>
+ * Simon Pickering
+ *
+ * Last update: 2005-05-12
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#include <linux/usb_sl811.h>
+
+MODULE_AUTHOR("Botond Botyanszki");
+MODULE_DESCRIPTION("REX-CFU1U PCMCIA driver for 2.6");
+MODULE_LICENSE("GPL");
+
+
+/*====================================================================*/
+/* MACROS */
+/*====================================================================*/
+
+#if defined(DEBUG) || defined(CONFIG_USB_DEBUG) || defined(PCMCIA_DEBUG)
+
+static int pc_debug = 0;
+module_param(pc_debug, int, 0644);
+
+#define DBG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG "sl811_cs: " args)
+
+#else
+#define DBG(n, args...) do{}while(0)
+#endif /* no debugging */
+
+#define INFO(args...) printk(KERN_INFO "sl811_cs: " args)
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444)
+
+#define CS_CHECK(fn, ret) \
+ do { \
+ last_fn = (fn); \
+ if ((last_ret = (ret)) != 0) \
+ goto cs_failed; \
+ } while (0)
+
+/*====================================================================*/
+/* VARIABLES */
+/*====================================================================*/
+
+static const char driver_name[DEV_NAME_LEN] = "sl811_cs";
+
+static dev_link_t *dev_list = NULL;
+
+static int irq_list[4] = { -1 };
+static int irq_list_count;
+
+module_param_array(irq_list, int, &irq_list_count, 0444);
+
+INT_MODULE_PARM(irq_mask, 0xdeb8);
+
+typedef struct local_info_t {
+ dev_link_t link;
+ dev_node_t node;
+} local_info_t;
+
+/*====================================================================*/
+
+static void release_platform_dev(struct device * dev)
+{
+ DBG(0, "sl811_cs platform_dev release\n");
+ dev->parent = NULL;
+}
+
+static struct sl811_platform_data platform_data = {
+ .potpg = 100,
+ .power = 50, /* == 100mA */
+ // .reset = ... FIXME: invoke CF reset on the card
+};
+
+static struct resource resources[] = {
+ [0] = {
+ .flags = IORESOURCE_IRQ,
+ },
+ [1] = {
+ // .name = "address",
+ .flags = IORESOURCE_IO,
+ },
+ [2] = {
+ // .name = "data",
+ .flags = IORESOURCE_IO,
+ },
+};
+
+extern struct device_driver sl811h_driver;
+
+static struct platform_device platform_dev = {
+ .id = -1,
+ .dev = {
+ .platform_data = &platform_data,
+ .release = release_platform_dev,
+ },
+ .resource = resources,
+ .num_resources = ARRAY_SIZE(resources),
+};
+
+static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq)
+{
+ if (platform_dev.dev.parent)
+ return -EBUSY;
+ platform_dev.dev.parent = parent;
+
+ /* finish seting up the platform device */
+ resources[0].start = irq;
+
+ resources[1].start = base_addr;
+ resources[1].end = base_addr;
+
+ resources[2].start = base_addr + 1;
+ resources[2].end = base_addr + 1;
+
+ /* The driver core will probe for us. We know sl811-hcd has been
+ * initialized already because of the link order dependency.
+ */
+ platform_dev.name = sl811h_driver.name;
+ return platform_device_register(&platform_dev);
+}
+
+/*====================================================================*/
+
+static void sl811_cs_detach(dev_link_t *link)
+{
+ dev_link_t **linkp;
+
+ DBG(0, "sl811_cs_detach(0x%p)\n", link);
+
+ /* Locate device structure */
+ for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) {
+ if (*linkp == link)
+ break;
+ }
+ if (*linkp == NULL)
+ return;
+
+ /* Break the link with Card Services */
+ if (link->handle)
+ pcmcia_deregister_client(link->handle);
+
+ /* Unlink device structure, and free it */
+ *linkp = link->next;
+ /* This points to the parent local_info_t struct */
+ kfree(link->priv);
+}
+
+static void sl811_cs_release(dev_link_t * link)
+{
+
+ DBG(0, "sl811_cs_release(0x%p)\n", link);
+
+ if (link->open) {
+ DBG(1, "sl811_cs: release postponed, '%s' still open\n",
+ link->dev->dev_name);
+ link->state |= DEV_STALE_CONFIG;
+ return;
+ }
+
+ /* Unlink the device chain */
+ link->dev = NULL;
+
+ platform_device_unregister(&platform_dev);
+ pcmcia_release_configuration(link->handle);
+ if (link->io.NumPorts1)
+ pcmcia_release_io(link->handle, &link->io);
+ if (link->irq.AssignedIRQ)
+ pcmcia_release_irq(link->handle, &link->irq);
+ link->state &= ~DEV_CONFIG;
+
+ if (link->state & DEV_STALE_LINK)
+ sl811_cs_detach(link);
+}
+
+static void sl811_cs_config(dev_link_t *link)
+{
+ client_handle_t handle = link->handle;
+ struct device *parent = &handle_to_dev(handle);
+ local_info_t *dev = link->priv;
+ tuple_t tuple;
+ cisparse_t parse;
+ int last_fn, last_ret;
+ u_char buf[64];
+ config_info_t conf;
+ cistpl_cftable_entry_t dflt = { 0 };
+
+ DBG(0, "sl811_cs_config(0x%p)\n", link);
+
+ tuple.DesiredTuple = CISTPL_CONFIG;
+ tuple.Attributes = 0;
+ tuple.TupleData = buf;
+ tuple.TupleDataMax = sizeof(buf);
+ tuple.TupleOffset = 0;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+ link->conf.ConfigBase = parse.config.base;
+ link->conf.Present = parse.config.rmask[0];
+
+ /* Configure card */
+ link->state |= DEV_CONFIG;
+
+ /* Look up the current Vcc */
+ CS_CHECK(GetConfigurationInfo,
+ pcmcia_get_configuration_info(handle, &conf));
+ link->conf.Vcc = conf.Vcc;
+
+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ while (1) {
+ cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
+
+ if (pcmcia_get_tuple_data(handle, &tuple) != 0
+ || pcmcia_parse_tuple(handle, &tuple, &parse)
+ != 0)
+ goto next_entry;
+
+ if (cfg->flags & CISTPL_CFTABLE_DEFAULT) {
+ dflt = *cfg;
+ }
+
+ if (cfg->index == 0)
+ goto next_entry;
+
+ link->conf.ConfigIndex = cfg->index;
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000
+ != conf.Vcc)
+ goto next_entry;
+ } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000
+ != conf.Vcc)
+ goto next_entry;
+ }
+
+ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ link->conf.Vpp1 = link->conf.Vpp2 =
+ cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
+ link->conf.Vpp1 = link->conf.Vpp2 =
+ dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+ /* we need an interrupt */
+ if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
+ link->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ link->io.NumPorts1 = link->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
+
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ link->io.BasePort1 = io->win[0].base;
+ link->io.NumPorts1 = io->win[0].len;
+
+ if (pcmcia_request_io(link->handle, &link->io) != 0)
+ goto next_entry;
+ }
+ break;
+
+next_entry:
+ if (link->io.NumPorts1)
+ pcmcia_release_io(link->handle, &link->io);
+ last_ret = pcmcia_get_next_tuple(handle, &tuple);
+ }
+
+ /* require an IRQ and two registers */
+ if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
+ goto cs_failed;
+ if (link->conf.Attributes & CONF_ENABLE_IRQ)
+ CS_CHECK(RequestIRQ,
+ pcmcia_request_irq(link->handle, &link->irq));
+ else
+ goto cs_failed;
+
+ CS_CHECK(RequestConfiguration,
+ pcmcia_request_configuration(link->handle, &link->conf));
+
+ sprintf(dev->node.dev_name, driver_name);
+ dev->node.major = dev->node.minor = 0;
+ link->dev = &dev->node;
+
+ printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
+ dev->node.dev_name, link->conf.ConfigIndex,
+ link->conf.Vcc/10, link->conf.Vcc%10);
+ if (link->conf.Vpp1)
+ printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+ printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", io 0x%04x-0x%04x", link->io.BasePort1,
+ link->io.BasePort1+link->io.NumPorts1-1);
+ printk("\n");
+
+ link->state &= ~DEV_CONFIG_PENDING;
+
+ if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
+ < 0) {
+cs_failed:
+ printk("sl811_cs_config failed\n");
+ cs_error(link->handle, last_fn, last_ret);
+ sl811_cs_release(link);
+ link->state &= ~DEV_CONFIG_PENDING;
+ }
+}
+
+static int
+sl811_cs_event(event_t event, int priority, event_callback_args_t *args)
+{
+ dev_link_t *link = args->client_data;
+
+ DBG(1, "sl811_cs_event(0x%06x)\n", event);
+
+ switch (event) {
+ case CS_EVENT_CARD_REMOVAL:
+ link->state &= ~DEV_PRESENT;
+ if (link->state & DEV_CONFIG)
+ sl811_cs_release(link);
+ break;
+
+ case CS_EVENT_CARD_INSERTION:
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ sl811_cs_config(link);
+ break;
+
+ case CS_EVENT_PM_SUSPEND:
+ link->state |= DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_RESET_PHYSICAL:
+ if (link->state & DEV_CONFIG)
+ pcmcia_release_configuration(link->handle);
+ break;
+
+ case CS_EVENT_PM_RESUME:
+ link->state &= ~DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_CARD_RESET:
+ if (link->state & DEV_CONFIG)
+ pcmcia_request_configuration(link->handle, &link->conf);
+ DBG(0, "reset sl811-hcd here?\n");
+ break;
+ }
+ return 0;
+}
+
+static dev_link_t *sl811_cs_attach(void)
+{
+ local_info_t *local;
+ dev_link_t *link;
+ client_reg_t client_reg;
+ int ret, i;
+
+ local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
+ if (!local)
+ return NULL;
+ memset(local, 0, sizeof(local_info_t));
+ link = &local->link;
+ link->priv = local;
+
+ /* Initialize */
+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
+ if (irq_list[0] == -1)
+ link->irq.IRQInfo2 = irq_mask;
+ else
+ for (i = 0; i < irq_list_count; i++)
+ link->irq.IRQInfo2 |= 1 << irq_list[i];
+ link->irq.Handler = NULL;
+
+ link->conf.Attributes = 0;
+ link->conf.Vcc = 33;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+
+ /* Register with Card Services */
+ link->next = dev_list;
+ dev_list = link;
+ client_reg.dev_info = (dev_info_t *) &driver_name;
+ client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
+ client_reg.EventMask =
+ CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+ CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+ CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+ client_reg.event_handler = &sl811_cs_event;
+ client_reg.Version = 0x0210;
+ client_reg.event_callback_args.client_data = link;
+ ret = pcmcia_register_client(&link->handle, &client_reg);
+ if (ret != CS_SUCCESS) {
+ cs_error(link->handle, RegisterClient, ret);
+ sl811_cs_detach(link);
+ return NULL;
+ }
+
+ return link;
+}
+
+static struct pcmcia_driver sl811_cs_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = (char *)driver_name,
+ },
+ .attach = sl811_cs_attach,
+ .detach = sl811_cs_detach,
+};
+
+/*====================================================================*/
+
+static int __init init_sl811_cs(void)
+{
+ return pcmcia_register_driver(&sl811_cs_driver);
+}
+module_init(init_sl811_cs);
+
+static void __exit exit_sl811_cs(void)
+{
+ pcmcia_unregister_driver(&sl811_cs_driver);
+}
+module_exit(exit_sl811_cs);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 869ff73..2d8bd9d 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1315,6 +1315,8 @@
#define USB_DEVICE_ID_WACOM_INTUOS2 0x0040
#define USB_DEVICE_ID_WACOM_VOLITO 0x0060
#define USB_DEVICE_ID_WACOM_PTU 0x0003
+#define USB_DEVICE_ID_WACOM_INTUOS3 0x00B0
+#define USB_DEVICE_ID_WACOM_CINTIQ 0x003F
#define USB_VENDOR_ID_KBGEAR 0x084e
#define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001
@@ -1401,6 +1403,7 @@
#define USB_VENDOR_ID_DELORME 0x1163
#define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100
+#define USB_DEVICE_ID_DELORME_EM_LT20 0x0200
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
@@ -1412,6 +1415,12 @@
#define USB_VENDOR_ID_BTC 0x046e
#define USB_DEVICE_ID_BTC_KEYBOARD 0x5303
+#define USB_VENDOR_ID_VERNIER 0x08f7
+#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001
+#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002
+#define USB_DEVICE_ID_VERNIER_SKIP 0x0003
+#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004
+
/*
* Alphabetically sorted blacklist by quirk type.
@@ -1437,6 +1446,7 @@
{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
@@ -1456,6 +1466,10 @@
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE },
@@ -1481,6 +1495,10 @@
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
diff --git a/drivers/usb/media/pwc/ChangeLog b/drivers/usb/media/pwc/ChangeLog
deleted file mode 100644
index b2eb71a..0000000
--- a/drivers/usb/media/pwc/ChangeLog
+++ /dev/null
@@ -1,143 +0,0 @@
-9.0.2
-
-* Adding #ifdef to compile PWC before and after 2.6.5
-
-9.0.1
-
-9.0
-
-
-8.12
-
-* Implement motorized pan/tilt feature for Logitech QuickCam Orbit/Spere.
-
-8.11.1
-
-* Fix for PCVC720/40, would not be able to set videomode
-* Fix for Samsung MPC models, appearantly they are based on a newer chipset
-
-8.11
-
-* 20 dev_hints (per request)
-* Hot unplugging should be better, no more dangling pointers or memory leaks
-* Added reserved Logitech webcam IDs
-* Device now remembers size & fps between close()/open()
-* Removed palette stuff altogether
-
-8.10.1
-
-* Added IDs for PCVC720K/40 and Creative Labs Webcam Pro
-
-8.10
-
-* Fixed ID for QuickCam Notebook pro
-* Added GREALSIZE ioctl() call
-* Fixed bug in case PWCX was not loaded and invalid size was set
-
-8.9
-
-* Merging with kernel 2.5.49
-* Adding IDs for QuickCam Zoom & QuickCam Notebook
-
-8.8
-
-* Fixing 'leds' parameter
-* Adding IDs for Logitech QuickCam Pro 4000
-* Making URB init/cleanup a little nicer
-
-8.7
-
-* Incorporating changes in ioctl() parameter passing
-* Also changes to URB mechanism
-
-8.6
-
-* Added ID's for Visionite VCS UM100 and UC300
-* Removed YUV420-interlaced palette altogether (was confusing)
-* Removed MIRROR stuff as it didn't work anyway
-* Fixed a problem with the 'leds' parameter (wouldn't blink)
-* Added ioctl()s for advanced features: 'extended' whitebalance ioctl()s,
- CONTOUR, BACKLIGHT, FLICKER, DYNNOISE.
-* VIDIOCGCAP.name now contains real camera model name instead of
- 'Philips xxx webcam'
-* Added PROBE ioctl (see previous point & API doc)
-
-8.5
-
-* Adding IDs for Creative Labs Webcam 5
-* Adding IDs for SOTEC CMS-001 webcam
-* Solving possible hang in VIDIOCSYNC when unplugging the cam
-* Forgot to return structure in VIDIOCPWCGAWB, oops
-* Time interval for the LEDs are now in milliseconds
-
-8.4
-
-* Fixing power_save option for Vesta range
-* Handling new error codes in ISOC callback
-* Adding dev_hint module parameter, to specify /dev/videoX device nodes
-
-8.3
-
-* Adding Samsung C10 and C30 cameras
-* Removing palette module parameter
-* Fixed typo in ID of QuickCam 3000 Pro
-* Adding LED settings (blinking while in use) for ToUCam cameras.
-* Turns LED off when camera is not in use.
-
-8.2
-
-* Making module more silent when trace = 0
-* Adding QuickCam 3000 Pro IDs
-* Chrominance control for the Vesta cameras
-* Hopefully fixed problems on machines with BIGMEM and > 1GB of RAM
-* Included Oliver Neukem's lock_kernel() patch
-* Allocates less memory for image buffers
-* Adds ioctl()s for the whitebalancing
-
-8.1
-
-* Adding support for 750
-* Adding V4L GAUDIO/SAUDIO/UNIT ioctl() calls
-
-8.0
-* 'damage control' after inclusion in 2.4.5.
-* Changed wait-queue mechanism in read/mmap/poll according to the book.
-* Included YUV420P palette.
-* Changed interface to decompressor module.
-* Cleaned up pwc structure a bit.
-
-7.0
-
-* Fixed bug in vcvt_420i_yuyv; extra variables on stack were misaligned.
-* There is now a clear error message when an image size is selected that
- is only supported using the decompressor, and the decompressor isn't
- loaded.
-* When the decompressor wasn't loaded, selecting large image size
- would create skewed or double images.
-
-6.3
-
-* Introduced spinlocks for the buffer pointer manipulation; a number of
- reports seem to suggest the down()/up() semaphores were the cause of
- lockups, since they are not suitable for interrupt/user locking.
-* Separated decompressor and core code into 2 modules.
-
-6.2
-
-* Non-integral image sizes are now padded with gray or black.
-* Added SHUTTERSPEED ioctl().
-* Fixed buglet in VIDIOCPWCSAGC; the function would always return an error,
- even though the call succeeded.
-* Added hotplug support for 2.4.*.
-* Memory: the 645/646 uses less memory now.
-
-6.1
-
-* VIDIOCSPICT returns -EINVAL with invalid palettes.
-* Added saturation control.
-* Split decompressors from rest.
-* Fixed bug that would reset the framerate to the default framerate if
- the rate field was set to 0 (which is not what I intended, nl. do not
- change the framerate!).
-* VIDIOCPWCSCQUAL (setting compression quality) now takes effect immediately.
-* Workaround for a bug in the 730 sensor.
diff --git a/drivers/usb/media/pwc/Makefile b/drivers/usb/media/pwc/Makefile
index e0b41ed..2d93a77 100644
--- a/drivers/usb/media/pwc/Makefile
+++ b/drivers/usb/media/pwc/Makefile
@@ -1,6 +1,6 @@
ifneq ($(KERNELRELEASE),)
-pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-dec1.o pwc-dec23.o pwc-kiara.o pwc-timon.o
+pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-timon.o pwc-kiara.o
obj-$(CONFIG_USB_PWC) += pwc.o
diff --git a/drivers/usb/media/pwc/pwc-ctrl.c b/drivers/usb/media/pwc/pwc-ctrl.c
index 42ec468..5309919 100644
--- a/drivers/usb/media/pwc/pwc-ctrl.c
+++ b/drivers/usb/media/pwc/pwc-ctrl.c
@@ -48,8 +48,6 @@
#include "pwc-uncompress.h"
#include "pwc-kiara.h"
#include "pwc-timon.h"
-#include "pwc-dec1.h"
-#include "pwc-dec23.h"
/* Request types: video */
#define SET_LUM_CTL 0x01
@@ -246,7 +244,7 @@
switch(pdev->type) {
case 645:
case 646:
- pwc_dec1_init(pdev->type, pdev->release, buf, pdev->decompress_data);
+/* pwc_dec1_init(pdev->type, pdev->release, buf, pdev->decompress_data); */
break;
case 675:
@@ -256,7 +254,7 @@
case 730:
case 740:
case 750:
- pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data);
+/* pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */
break;
}
}
@@ -318,8 +316,8 @@
if (ret < 0)
return ret;
- if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW)
- pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data);
+/* if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW)
+ pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */
pdev->cmd_len = 13;
memcpy(pdev->cmd_buf, buf, 13);
@@ -397,8 +395,8 @@
if (ret < 0)
return ret;
- if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW)
- pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data);
+/* if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW)
+ pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */
pdev->cmd_len = 12;
memcpy(pdev->cmd_buf, buf, 12);
diff --git a/drivers/usb/media/pwc/pwc-dec1.c b/drivers/usb/media/pwc/pwc-dec1.c
deleted file mode 100644
index 57d03d9..0000000
--- a/drivers/usb/media/pwc/pwc-dec1.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* Linux driver for Philips webcam
- Decompression for chipset version 1
- (C) 2004 Luc Saillard (luc@saillard.org)
-
- NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
- driver and thus may have bugs that are not present in the original version.
- Please send bug reports and support requests to <luc@saillard.org>.
- The decompression routines have been implemented by reverse-engineering the
- Nemosoft binary pwcx module. Caveat emptor.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-
-
-#include "pwc-dec1.h"
-
-
-void pwc_dec1_init(int type, int release, void *buffer, void *table)
-{
-
-}
-
-void pwc_dec1_exit(void)
-{
-
-
-
-}
-
diff --git a/drivers/usb/media/pwc/pwc-dec1.h b/drivers/usb/media/pwc/pwc-dec1.h
deleted file mode 100644
index a7ffd9c..0000000
--- a/drivers/usb/media/pwc/pwc-dec1.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Linux driver for Philips webcam
- (C) 2004 Luc Saillard (luc@saillard.org)
-
- NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
- driver and thus may have bugs that are not present in the original version.
- Please send bug reports and support requests to <luc@saillard.org>.
- The decompression routines have been implemented by reverse-engineering the
- Nemosoft binary pwcx module. Caveat emptor.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-
-
-#ifndef PWC_DEC1_H
-#define PWC_DEC1_H
-
-void pwc_dec1_init(int type, int release, void *buffer, void *private_data);
-void pwc_dec1_exit(void);
-
-#endif
-
-
-
diff --git a/drivers/usb/media/pwc/pwc-dec23.c b/drivers/usb/media/pwc/pwc-dec23.c
deleted file mode 100644
index 98fa3f7..0000000
--- a/drivers/usb/media/pwc/pwc-dec23.c
+++ /dev/null
@@ -1,623 +0,0 @@
-/* Linux driver for Philips webcam
- Decompression for chipset version 2 et 3
- (C) 2004 Luc Saillard (luc@saillard.org)
-
- NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
- driver and thus may have bugs that are not present in the original version.
- Please send bug reports and support requests to <luc@saillard.org>.
- The decompression routines have been implemented by reverse-engineering the
- Nemosoft binary pwcx module. Caveat emptor.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include "pwc-timon.h"
-#include "pwc-kiara.h"
-#include "pwc-dec23.h"
-#include "pwc-ioctl.h"
-
-#include <linux/string.h>
-
-/****
- *
- *
- *
- */
-
-
-static void fill_table_a000(unsigned int *p)
-{
- static unsigned int initial_values[12] = {
- 0xFFAD9B00, 0xFFDDEE00, 0x00221200, 0x00526500,
- 0xFFC21E00, 0x003DE200, 0xFF924B80, 0xFFD2A300,
- 0x002D5D00, 0x006DB480, 0xFFED3E00, 0x0012C200
- };
- static unsigned int values_derivated[12] = {
- 0x0000A4CA, 0x00004424, 0xFFFFBBDC, 0xFFFF5B36,
- 0x00007BC4, 0xFFFF843C, 0x0000DB69, 0x00005ABA,
- 0xFFFFA546, 0xFFFF2497, 0x00002584, 0xFFFFDA7C
- };
- unsigned int temp_values[12];
- int i,j;
-
- memcpy(temp_values,initial_values,sizeof(initial_values));
- for (i=0;i<256;i++)
- {
- for (j=0;j<12;j++)
- {
- *p++ = temp_values[j];
- temp_values[j] += values_derivated[j];
- }
- }
-}
-
-static void fill_table_d000(unsigned char *p)
-{
- int bit,byte;
-
- for (bit=0; bit<8; bit++)
- {
- unsigned char bitpower = 1<<bit;
- unsigned char mask = bitpower-1;
- for (byte=0; byte<256; byte++)
- {
- if (byte & bitpower)
- *p++ = -(byte & mask);
- else
- *p++ = (byte & mask);
- }
- }
-}
-
-/*
- *
- * Kiara: 0 <= ver <= 7
- * Timon: 0 <= ver <= 15
- *
- */
-static void fill_table_color(unsigned int version, const unsigned int *romtable,
- unsigned char *p0004,
- unsigned char *p8004)
-{
- const unsigned int *table;
- unsigned char *p0, *p8;
- int i,j,k;
- int dl,bit,pw;
-
- romtable += version*256;
-
- for (i=0; i<2; i++)
- {
- table = romtable + i*128;
-
- for (dl=0; dl<16; dl++)
- {
- p0 = p0004 + (i<<14) + (dl<<10);
- p8 = p8004 + (i<<12) + (dl<<8);
-
- for (j=0; j<8; j++ , table++, p0+=128)
- {
- for (k=0; k<16; k++)
- {
- if (k==0)
- bit=1;
- else if (k>=1 && k<3)
- bit=(table[0]>>15)&7;
- else if (k>=3 && k<6)
- bit=(table[0]>>12)&7;
- else if (k>=6 && k<10)
- bit=(table[0]>>9)&7;
- else if (k>=10 && k<13)
- bit=(table[0]>>6)&7;
- else if (k>=13 && k<15)
- bit=(table[0]>>3)&7;
- else
- bit=(table[0])&7;
- if (k == 0)
- *(unsigned char *)p8++ = 8;
- else
- *(unsigned char *)p8++ = j - bit;
- *(unsigned char *)p8++ = bit;
-
- pw = 1<<bit;
- p0[k+0x00] = (1*pw) + 0x80;
- p0[k+0x10] = (2*pw) + 0x80;
- p0[k+0x20] = (3*pw) + 0x80;
- p0[k+0x30] = (4*pw) + 0x80;
- p0[k+0x40] = (-pw) + 0x80;
- p0[k+0x50] = (2*-pw) + 0x80;
- p0[k+0x60] = (3*-pw) + 0x80;
- p0[k+0x70] = (4*-pw) + 0x80;
- } /* end of for (k=0; k<16; k++, p8++) */
- } /* end of for (j=0; j<8; j++ , table++) */
- } /* end of for (dl=0; dl<16; dl++) */
- } /* end of for (i=0; i<2; i++) */
-}
-
-/*
- * precision = (pdev->xx + pdev->yy)
- *
- */
-static void fill_table_dc00_d800(unsigned int precision, unsigned int *pdc00, unsigned int *pd800)
-{
- int i;
- unsigned int offset1, offset2;
-
- for(i=0,offset1=0x4000, offset2=0; i<256 ; i++,offset1+=0x7BC4, offset2+=0x7BC4)
- {
- unsigned int msb = offset1 >> 15;
-
- if ( msb > 255)
- {
- if (msb)
- msb=0;
- else
- msb=255;
- }
-
- *pdc00++ = msb << precision;
- *pd800++ = offset2;
- }
-
-}
-
-/*
- * struct {
- * unsigned char op; // operation to execute
- * unsigned char bits; // bits use to perform operation
- * unsigned char offset1; // offset to add to access in the table_0004 % 16
- * unsigned char offset2; // offset to add to access in the table_0004
- * }
- *
- */
-static unsigned int table_ops[] = {
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x10, 0x00,0x06,0x01,0x30,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x01,0x20, 0x01,0x00,0x00,0x00,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x50, 0x00,0x05,0x02,0x00,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x03,0x00, 0x01,0x00,0x00,0x00,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x10, 0x00,0x06,0x02,0x10,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x01,0x60, 0x01,0x00,0x00,0x00,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x50, 0x00,0x05,0x02,0x40,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x03,0x40, 0x01,0x00,0x00,0x00,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x10, 0x00,0x06,0x01,0x70,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x01,0x20, 0x01,0x00,0x00,0x00,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x50, 0x00,0x05,0x02,0x00,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x03,0x00, 0x01,0x00,0x00,0x00,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x10, 0x00,0x06,0x02,0x50,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x01,0x60, 0x01,0x00,0x00,0x00,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x50, 0x00,0x05,0x02,0x40,
-0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x03,0x40, 0x01,0x00,0x00,0x00
-};
-
-/*
- * TODO: multiply by 4 all values
- *
- */
-static unsigned int MulIdx[256] = {
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 2, 3, 0, 1, 2, 3, 0, 1, 2, 3, 0, 1, 2, 3,
- 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3,
- 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5, 4, 4, 4, 4,
- 6, 7, 8, 9, 7,10,11, 8, 8,11,10, 7, 9, 8, 7, 6,
- 4, 5, 5, 4, 4, 5, 5, 4, 4, 5, 5, 4, 4, 5, 5, 4,
- 1, 3, 0, 2, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3, 0, 2,
- 0, 3, 3, 0, 1, 2, 2, 1, 2, 1, 1, 2, 3, 0, 0, 3,
- 0, 1, 2, 3, 3, 2, 1, 0, 3, 2, 1, 0, 0, 1, 2, 3,
- 1, 1, 1, 1, 3, 3, 3, 3, 0, 0, 0, 0, 2, 2, 2, 2,
- 7,10,11, 8, 9, 8, 7, 6, 6, 7, 8, 9, 8,11,10, 7,
- 4, 5, 5, 4, 5, 4, 4, 5, 5, 4, 4, 5, 4, 5, 5, 4,
- 7, 9, 6, 8,10, 8, 7,11,11, 7, 8,10, 8, 6, 9, 7,
- 1, 3, 0, 2, 2, 0, 3, 1, 2, 0, 3, 1, 1, 3, 0, 2,
- 1, 2, 2, 1, 3, 0, 0, 3, 0, 3, 3, 0, 2, 1, 1, 2,
-10, 8, 7,11, 8, 6, 9, 7, 7, 9, 6, 8,11, 7, 8,10
-};
-
-
-
-void pwc_dec23_init(int type, int release, unsigned char *mode, void *data)
-{
- int flags;
- struct pwc_dec23_private *pdev = data;
- release = release;
-
- switch (type)
- {
- case 720:
- case 730:
- case 740:
- case 750:
- flags = mode[2]&0x18; /* our: flags = 8, mode[2]==e8 */
- if (flags==8)
- pdev->zz = 7;
- else if (flags==0x10)
- pdev->zz = 8;
- else
- pdev->zz = 6;
- flags = mode[2]>>5; /* our: 7 */
-
- fill_table_color(flags, (unsigned int *)KiaraRomTable, pdev->table_0004, pdev->table_8004);
- break;
-
-
- case 675:
- case 680:
- case 690:
- flags = mode[2]&6;
- if (flags==2)
- pdev->zz = 7;
- else if (flags==4)
- pdev->zz = 8;
- else
- pdev->zz = 6;
- flags = mode[2]>>3;
-
- fill_table_color(flags, (unsigned int *)TimonRomTable, pdev->table_0004, pdev->table_8004);
- break;
-
- default:
- /* Not supported */
- return;
- }
-
- /* * * * ** */
- pdev->xx = 8 - pdev->zz;
- pdev->yy = 15 - pdev->xx;
- pdev->zzmask = 0xFF>>pdev->xx;
- //pdev->zzmask = (1U<<pdev->zz)-1;
-
-
- fill_table_dc00_d800(pdev->xx + pdev->yy, pdev->table_dc00, pdev->table_d800);
- fill_table_a000(pdev->table_a004);
- fill_table_d000(pdev->table_d004);
-}
-
-
-/*
- * To manage the stream, we keep in a 32 bits variables,
- * the next bits in the stream. fill_reservoir() add to
- * the reservoir at least wanted nbits.
- *
- *
- */
-#define fill_nbits(reservoir,nbits_in_reservoir,stream,nbits_wanted) do { \
- while (nbits_in_reservoir<nbits_wanted) \
- { \
- reservoir |= (*(stream)++) << nbits_in_reservoir; \
- nbits_in_reservoir+=8; \
- } \
-} while(0);
-
-#define get_nbits(reservoir,nbits_in_reservoir,stream,nbits_wanted,result) do { \
- fill_nbits(reservoir,nbits_in_reservoir,stream,nbits_wanted); \
- result = (reservoir) & ((1U<<nbits_wanted)-1); \
- reservoir >>= nbits_wanted; \
- nbits_in_reservoir -= nbits_wanted; \
-} while(0);
-
-
-
-static void DecompressBand23(const struct pwc_dec23_private *pdev,
- const unsigned char *rawyuv,
- unsigned char *planar_y,
- unsigned char *planar_u,
- unsigned char *planar_v,
- unsigned int image_x, /* aka number of pixels wanted ??? */
- unsigned int pixels_per_line, /* aka number of pixels per line */
- int flags)
-{
-
-
- unsigned int reservoir, nbits_in_reservoir;
- int first_4_bits;
- unsigned int bytes_per_channel;
- int line_size; /* size of the line (4Y+U+V) */
- int passes;
- const unsigned char *ptable0004, *ptable8004;
-
- int even_line;
- unsigned int temp_colors[16];
- int nblocks;
-
- const unsigned char *stream;
- unsigned char *dest_y, *dest_u=NULL, *dest_v=NULL;
- unsigned int offset_to_plane_u, offset_to_plane_v;
-
- int i;
-
-
- reservoir = 0;
- nbits_in_reservoir = 0;
- stream = rawyuv+1; /* The first byte of the stream is skipped */
- even_line = 1;
-
- get_nbits(reservoir,nbits_in_reservoir,stream,4,first_4_bits);
-
- line_size = pixels_per_line*3;
-
- for (passes=0;passes<2;passes++)
- {
- if (passes==0)
- {
- bytes_per_channel = pixels_per_line;
- dest_y = planar_y;
- nblocks = image_x/4;
- }
- else
- {
- /* Format planar: All Y, then all U, then all V */
- bytes_per_channel = pixels_per_line/2;
- dest_u = planar_u;
- dest_v = planar_v;
- dest_y = dest_u;
- nblocks = image_x/8;
- }
-
- offset_to_plane_u = bytes_per_channel*2;
- offset_to_plane_v = bytes_per_channel*3;
- /*
- printf("bytes_per_channel = %d\n",bytes_per_channel);
- printf("offset_to_plane_u = %d\n",offset_to_plane_u);
- printf("offset_to_plane_v = %d\n",offset_to_plane_v);
- */
-
- while (nblocks-->0)
- {
- unsigned int gray_index;
-
- fill_nbits(reservoir,nbits_in_reservoir,stream,16);
- gray_index = reservoir & pdev->zzmask;
- reservoir >>= pdev->zz;
- nbits_in_reservoir -= pdev->zz;
-
- fill_nbits(reservoir,nbits_in_reservoir,stream,2);
-
- if ( (reservoir & 3) == 0)
- {
- reservoir>>=2;
- nbits_in_reservoir-=2;
- for (i=0;i<16;i++)
- temp_colors[i] = pdev->table_dc00[gray_index];
-
- }
- else
- {
- unsigned int channel_v, offset1;
-
- /* swap bit 0 and 2 of offset_OR */
- channel_v = ((reservoir & 1) << 2) | (reservoir & 2) | ((reservoir & 4)>>2);
- reservoir>>=3;
- nbits_in_reservoir-=3;
-
- for (i=0;i<16;i++)
- temp_colors[i] = pdev->table_d800[gray_index];
-
- ptable0004 = pdev->table_0004 + (passes*16384) + (first_4_bits*1024) + (channel_v*128);
- ptable8004 = pdev->table_8004 + (passes*4096) + (first_4_bits*256) + (channel_v*32);
-
- offset1 = 0;
- while(1)
- {
- unsigned int index_in_table_ops, op, rows=0;
- fill_nbits(reservoir,nbits_in_reservoir,stream,16);
-
- /* mode is 0,1 or 2 */
- index_in_table_ops = (reservoir&0x3F);
- op = table_ops[ index_in_table_ops*4 ];
- if (op == 2)
- {
- reservoir >>= 2;
- nbits_in_reservoir -= 2;
- break; /* exit the while(1) */
- }
- if (op == 0)
- {
- unsigned int shift;
-
- offset1 = (offset1 + table_ops[index_in_table_ops*4+2]) & 0x0F;
- shift = table_ops[ index_in_table_ops*4+1 ];
- reservoir >>= shift;
- nbits_in_reservoir -= shift;
- rows = ptable0004[ offset1 + table_ops[index_in_table_ops*4+3] ];
- }
- if (op == 1)
- {
- /* 10bits [ xxxx xxxx yyyy 000 ]
- * yyy => offset in the table8004
- * xxx => offset in the tabled004
- */
- unsigned int mask, shift;
- unsigned int col1, row1, total_bits;
-
- offset1 = (offset1 + ((reservoir>>3)&0x0F)+1) & 0x0F;
-
- col1 = (reservoir>>7) & 0xFF;
- row1 = ptable8004 [ offset1*2 ];
-
- /* Bit mask table */
- mask = pdev->table_d004[ (row1<<8) + col1 ];
- shift = ptable8004 [ offset1*2 + 1];
- rows = ((mask << shift) + 0x80) & 0xFF;
-
- total_bits = row1 + 8;
- reservoir >>= total_bits;
- nbits_in_reservoir -= total_bits;
- }
- {
- const unsigned int *table_a004 = pdev->table_a004 + rows*12;
- unsigned int *poffset = MulIdx + offset1*16; /* 64/4 (int) */
- for (i=0;i<16;i++)
- {
- temp_colors[i] += table_a004[ *poffset ];
- poffset++;
- }
- }
- }
- }
-#define USE_SIGNED_INT_FOR_COLOR
-#ifdef USE_SIGNED_INT_FOR_COLOR
-# define CLAMP(x) ((x)>255?255:((x)<0?0:x))
-#else
-# define CLAMP(x) ((x)>255?255:x)
-#endif
-
- if (passes == 0)
- {
-#ifdef USE_SIGNED_INT_FOR_COLOR
- const int *c = temp_colors;
-#else
- const unsigned int *c = temp_colors;
-#endif
- unsigned char *d;
-
- d = dest_y;
- for (i=0;i<4;i++,c++)
- *d++ = CLAMP((*c) >> pdev->yy);
-
- d = dest_y + bytes_per_channel;
- for (i=0;i<4;i++,c++)
- *d++ = CLAMP((*c) >> pdev->yy);
-
- d = dest_y + offset_to_plane_u;
- for (i=0;i<4;i++,c++)
- *d++ = CLAMP((*c) >> pdev->yy);
-
- d = dest_y + offset_to_plane_v;
- for (i=0;i<4;i++,c++)
- *d++ = CLAMP((*c) >> pdev->yy);
-
- dest_y += 4;
- }
- else if (passes == 1)
- {
-#ifdef USE_SIGNED_INT_FOR_COLOR
- int *c1 = temp_colors;
- int *c2 = temp_colors+4;
-#else
- unsigned int *c1 = temp_colors;
- unsigned int *c2 = temp_colors+4;
-#endif
- unsigned char *d;
-
- d = dest_y;
- for (i=0;i<4;i++,c1++,c2++)
- {
- *d++ = CLAMP((*c1) >> pdev->yy);
- *d++ = CLAMP((*c2) >> pdev->yy);
- }
- c1 = temp_colors+12;
- //c2 = temp_colors+8;
- d = dest_y + bytes_per_channel;
- for (i=0;i<4;i++,c1++,c2++)
- {
- *d++ = CLAMP((*c1) >> pdev->yy);
- *d++ = CLAMP((*c2) >> pdev->yy);
- }
-
- if (even_line) /* Each line, swap u/v */
- {
- even_line=0;
- dest_y = dest_v;
- dest_u += 8;
- }
- else
- {
- even_line=1;
- dest_y = dest_u;
- dest_v += 8;
- }
- }
-
- } /* end of while (nblocks-->0) */
-
- } /* end of for (passes=0;passes<2;passes++) */
-
-}
-
-
-/**
- *
- * image: size of the image wanted
- * view : size of the image returned by the camera
- * offset: (x,y) to displayer image in the view
- *
- * src: raw data
- * dst: image output
- * flags: PWCX_FLAG_PLANAR
- * pdev: private buffer
- * bandlength:
- *
- */
-void pwc_dec23_decompress(const struct pwc_coord *image,
- const struct pwc_coord *view,
- const struct pwc_coord *offset,
- const void *src,
- void *dst,
- int flags,
- const void *data,
- int bandlength)
-{
- const struct pwc_dec23_private *pdev = data;
- unsigned char *pout, *pout_planar_y=NULL, *pout_planar_u=NULL, *pout_planar_v=NULL;
- int i,n,stride,pixel_size;
-
-
- if (flags & PWCX_FLAG_BAYER)
- {
- pout = dst + (view->x * offset->y) + offset->x;
- pixel_size = view->x * 4;
- }
- else
- {
- n = view->x * view->y;
-
- /* offset in Y plane */
- stride = view->x * offset->y;
- pout_planar_y = dst + stride + offset->x;
-
- /* offsets in U/V planes */
- stride = (view->x * offset->y)/4 + offset->x/2;
- pout_planar_u = dst + n + + stride;
- pout_planar_v = dst + n + n/4 + stride;
-
- pixel_size = view->x * 4;
- }
-
-
- for (i=0;i<image->y;i+=4)
- {
- if (flags & PWCX_FLAG_BAYER)
- {
- //TODO:
- //DecompressBandBayer(pdev,src,pout,image.x,view->x,flags);
- src += bandlength;
- pout += pixel_size;
- }
- else
- {
- DecompressBand23(pdev,src,pout_planar_y,pout_planar_u,pout_planar_v,image->x,view->x,flags);
- src += bandlength;
- pout_planar_y += pixel_size;
- pout_planar_u += view->x;
- pout_planar_v += view->x;
- }
- }
-}
-
-void pwc_dec23_exit(void)
-{
- /* Do nothing */
-
-}
-
diff --git a/drivers/usb/media/pwc/pwc-dec23.h b/drivers/usb/media/pwc/pwc-dec23.h
deleted file mode 100644
index 5b2aacd..0000000
--- a/drivers/usb/media/pwc/pwc-dec23.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* Linux driver for Philips webcam
- (C) 2004 Luc Saillard (luc@saillard.org)
-
- NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
- driver and thus may have bugs that are not present in the original version.
- Please send bug reports and support requests to <luc@saillard.org>.
- The decompression routines have been implemented by reverse-engineering the
- Nemosoft binary pwcx module. Caveat emptor.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#ifndef PWC_DEC23_H
-#define PWC_DEC23_H
-
-struct pwc_dec23_private
-{
- unsigned char xx,yy,zz,zzmask;
-
- unsigned char table_0004[2*0x4000];
- unsigned char table_8004[2*0x1000];
- unsigned int table_a004[256*12];
-
- unsigned char table_d004[8*256];
- unsigned int table_d800[256];
- unsigned int table_dc00[256];
-};
-
-
-void pwc_dec23_init(int type, int release, unsigned char *buffer, void *private_data);
-void pwc_dec23_exit(void);
-void pwc_dec23_decompress(const struct pwc_coord *image,
- const struct pwc_coord *view,
- const struct pwc_coord *offset,
- const void *src,
- void *dst,
- int flags,
- const void *data,
- int bandlength);
-
-
-
-#endif
-
-
-
diff --git a/drivers/usb/media/pwc/pwc-if.c b/drivers/usb/media/pwc/pwc-if.c
index cca47f4..5429ff3 100644
--- a/drivers/usb/media/pwc/pwc-if.c
+++ b/drivers/usb/media/pwc/pwc-if.c
@@ -68,8 +68,6 @@
#include "pwc-ioctl.h"
#include "pwc-kiara.h"
#include "pwc-timon.h"
-#include "pwc-dec23.h"
-#include "pwc-dec1.h"
#include "pwc-uncompress.h"
/* Function prototypes and driver templates */
@@ -322,6 +320,7 @@
case 730:
case 740:
case 750:
+#if 0
Trace(TRACE_MEMORY,"private_data(%zu)\n",sizeof(struct pwc_dec23_private));
kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL); /* Timon & Kiara */
break;
@@ -330,6 +329,8 @@
/* TODO & FIXME */
kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL);
break;
+#endif
+ ;
}
if (kbuf == NULL) {
Err("Failed to allocate decompress table.\n");
@@ -1131,11 +1132,11 @@
case 730:
case 740:
case 750:
- pwc_dec23_exit(); /* Timon & Kiara */
+/* pwc_dec23_exit(); *//* Timon & Kiara */
break;
case 645:
case 646:
- pwc_dec1_exit();
+/* pwc_dec1_exit(); */
break;
}
diff --git a/drivers/usb/media/pwc/pwc-kiara.c b/drivers/usb/media/pwc/pwc-kiara.c
index 5485800..c498c68 100644
--- a/drivers/usb/media/pwc/pwc-kiara.c
+++ b/drivers/usb/media/pwc/pwc-kiara.c
@@ -316,576 +316,3 @@
},
};
-
-/*
- * Rom table for kiara chips
- *
- * 32 roms tables (one for each resolution ?)
- * 2 tables per roms (one for each passes) (Y, and U&V)
- * 128 bytes per passes
- */
-
-const unsigned int KiaraRomTable [8][2][16][8] =
-{
- { /* version 0 */
- { /* version 0, passes 0 */
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000001,0x00000001},
- {0x00000000,0x00000000,0x00000009,0x00000009,
- 0x00000009,0x00000009,0x00000009,0x00000009},
- {0x00000000,0x00000000,0x00000009,0x00000049,
- 0x00000049,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000249,0x0000024a,0x00000049},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000249,0x00000249,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000049,0x00000249,
- 0x00000249,0x0000124a,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000049,0x00000249,
- 0x0000124a,0x00009252,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00009252,0x00009292,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x00009292,0x00009292,0x00009493,0x000124db},
- {0x00000000,0x00000000,0x00000249,0x0000924a,
- 0x00009492,0x0000a49b,0x0000a49b,0x000124db},
- {0x00000000,0x00000000,0x00001249,0x00009252,
- 0x0000a493,0x000124db,0x000124db,0x000126dc},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x000124db,0x000126dc,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000124db,0x000136e4,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001b92d,0x0001b925},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b925,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 0, passes 1 */
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000},
- {0x00000000,0x00000000,0x00000001,0x00000009,
- 0x00000009,0x00000009,0x00000009,0x00000001},
- {0x00000000,0x00000000,0x00000009,0x00000009,
- 0x00000049,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000249,0x00000249,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000049,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x00001252},
- {0x00000000,0x00000000,0x00000049,0x00001249,
- 0x0000124a,0x0000124a,0x00001252,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x00009252,0x00009252,0x00009292,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x0000924a,
- 0x00009292,0x00009292,0x00009292,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x00009292,
- 0x00009492,0x00009493,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x0000a493,0x000124db,0x000126dc,0x000126dc},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000126dc,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00009252,0x00009493,
- 0x000126dc,0x000126dc,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000136e4,0x000136e4,0x0001b725,0x0001b724},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 1 */
- { /* version 1, passes 0 */
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000001},
- {0x00000000,0x00000000,0x00000009,0x00000009,
- 0x00000009,0x00000009,0x00000009,0x00000009},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000249,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000049,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x00001252},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x0000124a,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x0000124a,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x0000124a,0x00009252,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x00009252,0x00009292,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x00009252,0x00009292,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x0000924a,
- 0x00009252,0x00009493,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x0000924a,
- 0x00009292,0x00009493,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x00009252,
- 0x00009492,0x00009493,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x000124db,0x000124db,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000126dc,0x000126dc,0x000126dc},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 1, passes 1 */
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000},
- {0x00000000,0x00000000,0x00000049,0x00000009,
- 0x00000049,0x00000009,0x00000001,0x00000000},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000049,0x00000000},
- {0x00000000,0x00000000,0x00000249,0x00000049,
- 0x00000249,0x00000049,0x0000024a,0x00000001},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x00000001},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x00000001},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x00000009},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x0000124a,0x0000024a,0x00000009},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x0000124a,0x0000024a,0x00000009},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x00009252,0x00001252,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x00009292,0x00001252,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x00009292,0x00001252,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00001252,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009292,0x00009292,0x00001252,0x0000024a},
- {0x00000000,0x00000000,0x0000924a,0x0000924a,
- 0x00009492,0x00009493,0x00009292,0x00001252},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 2 */
- { /* version 2, passes 0 */
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x0000124a,0x00001252,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x00009252,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x0000124a,0x00009292,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x00009252,0x00009493,0x00009493,0x0000a49b},
- {0x00000000,0x00000000,0x00000249,0x0000924a,
- 0x00009292,0x00009493,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009292,0x00009493,0x0000a49b,0x000124db},
- {0x00000000,0x00000000,0x00001249,0x00009252,
- 0x00009492,0x0000a49b,0x0000a49b,0x000124db},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x000124db,0x000124db,0x000126dc},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x0000a493,0x000124db,0x000126dc,0x000126dc},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x000136e4},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000126dc,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0001249b,0x000126dc,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000136e4,0x000136e4,0x0001b724},
- {0x00000000,0x00000000,0x00009252,0x000124db,
- 0x000126dc,0x0001b724,0x0001b725,0x0001b925},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 2, passes 1 */
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00000249,
- 0x0000124a,0x0000124a,0x00001252,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x0000124a,0x00009292,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009292,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x0000a49b,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009292,0x00009493,0x0000a49b,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009292,0x00009493,0x0000a49b,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009492,0x0000a49b,0x0000a49b,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00009252,
- 0x00009492,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x0000a49b,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x00009252,0x0000a49b,
- 0x0001249b,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 3 */
- { /* version 3, passes 0 */
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x0000124a,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009292,0x00009493,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009492,0x0000a49b,0x0000a49b,0x000124db},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x000124db,0x000126dc,0x000126dc},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x000126dc},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000126dc,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000126dc,0x000136e4,0x0001b724},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0001249b,0x000126dc,0x000136e4,0x0001b724},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x0001b724},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000136e4,0x0001b725,0x0001b724},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000136e4,0x0001b725,0x0001b925},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x000136e4,0x0001b92d,0x0001b925},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001b92d,0x0001c92d},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000126dc,0x0001b724,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x000136e4,0x0001b925,0x00025bb6,0x00024b77},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 3, passes 1 */
- {0x00000000,0x00000000,0x00001249,0x00000249,
- 0x0000124a,0x0000124a,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009292,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009492,0x00009493,0x0000a49b,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00009252,
- 0x00009492,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x0000a49b,0x000126dc,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x0000a49b,0x000126dc,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x0000a49b,0x000126dc,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x000124db,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00009492,0x0000a49b,
- 0x000136e4,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x0001b724,0x0001b724,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 4 */
- { /* version 4, passes 0 */
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000249,0x00000049,
- 0x00000249,0x00000249,0x0000024a,0x00000049},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x00009252,0x00001252,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009493,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009292,0x00009493,0x00009493,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000124db,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0001249b,0x000126dc,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00009252,0x00009493,
- 0x000124db,0x000136e4,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00009252,0x0000a49b,
- 0x000124db,0x000136e4,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x000136e4,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00009492,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001b725,0x0001b724},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x000136e4,0x0001b925,0x0001b92d,0x0001b925},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 4, passes 1 */
- {0x00000000,0x00000000,0x00000249,0x00000049,
- 0x00000009,0x00000009,0x00000009,0x00000009},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000049,0x00000049,0x00000009,0x00000009},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x00000249,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x0000124a,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x0000124a,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009252,0x0000124a,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x00009252,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x00009292,0x00009292,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x00009292,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x00009493,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000124db,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000136e4,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009252,0x000124db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 5 */
- { /* version 5, passes 0 */
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x00000249,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009292,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009492,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x0000a49b,0x000124db,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000126dc,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x000136e4,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x000136e4,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001b725,0x000136e4},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000136e4,0x0001b724,0x0001b92d,0x0001b724},
- {0x00000000,0x00000000,0x00009492,0x0000a49b,
- 0x000136e4,0x0001b724,0x0001b92d,0x0001b724},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b925,0x0001c96e,0x0001b925},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x0001b724,0x0001b925,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x0001c924,0x0002496d,0x00025bb6,0x00024b77},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 5, passes 1 */
- {0x00000000,0x00000000,0x00001249,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x0000124a,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009252,0x00009252,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x0000a49b,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x0000a49b,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x0000a49b,0x00009292,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000124db,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000124db,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000126dc,0x000126dc,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000136e4,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009292,0x000124db,
- 0x000136e4,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009492,0x000126db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 6 */
- { /* version 6, passes 0 */
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x0000a493,0x0000a49b,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000126dc,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x000136e4,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001b725,0x000126dc},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000136e4,0x0001b724,0x0001b92d,0x000136e4},
- {0x00000000,0x00000000,0x00009492,0x0000a49b,
- 0x000136e4,0x0001b724,0x0001b92d,0x0001b724},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b724,0x0001b92d,0x0001b724},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b925,0x0001b92d,0x0001b925},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x0001b724,0x0001b925,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x0001b724,0x0001c92d,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x0001b724,0x0001c92d,0x00024b76,0x0002496e},
- {0x00000000,0x00000000,0x00012492,0x000126db,
- 0x0001c924,0x00024b6d,0x0002ddb6,0x00025bbf},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 6, passes 1 */
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x0000124a,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x00009252,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x00009292,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x0000a49b,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000124db,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000126dc,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000126dc,0x000126dc,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000136e4,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009492,0x000126db,
- 0x000136e4,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009492,0x000126db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00009492,0x000126db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001c924,0x0001b724,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 7 */
- { /* version 7, passes 0 */
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x0000a49b,
- 0x0001249b,0x000126dc,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x000136e4,0x0001b725,0x000124db},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000136e4,0x0001b724,0x0001b725,0x000126dc},
- {0x00000000,0x00000000,0x00009292,0x000124db,
- 0x000136e4,0x0001b724,0x0001b725,0x000126dc},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b724,0x0001c96e,0x000136e4},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001c92d,0x0001c96e,0x0001b724},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x000136e4,0x0001c92d,0x0001c96e,0x0001b724},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x0001b724,0x0001c92d,0x0001c96e,0x0001b925},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x0001b724,0x0001c92d,0x00024b76,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x0001b924,0x0001c92d,0x00024b76,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x0001b924,0x0001c92d,0x00024b76,0x0002496e},
- {0x00000000,0x00000000,0x00012492,0x000136db,
- 0x00024924,0x00024b6d,0x0002ddb6,0x00025bbf},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 7, passes 1 */
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x0000124a,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x00009492,0x00009292,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x0000a49b,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000126dc,0x000124db,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000136e4,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000136db,
- 0x0001b724,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000136db,
- 0x0001b724,0x000126dc,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00009292,0x000136db,
- 0x0001b724,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009492,0x000136db,
- 0x0001b724,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00012492,0x0001b6db,
- 0x0001c924,0x0001b724,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- }
-};
-
diff --git a/drivers/usb/media/pwc/pwc-timon.c b/drivers/usb/media/pwc/pwc-timon.c
index f950a4e..dee9671 100644
--- a/drivers/usb/media/pwc/pwc-timon.c
+++ b/drivers/usb/media/pwc/pwc-timon.c
@@ -314,1133 +314,3 @@
},
};
-/*
- * 16 versions:
- * 2 tables (one for Y, and one for U&V)
- * 16 levels of details per tables
- * 8 blocs
- */
-
-const unsigned int TimonRomTable [16][2][16][8] =
-{
- { /* version 0 */
- { /* version 0, passes 0 */
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000001},
- {0x00000000,0x00000000,0x00000001,0x00000001,
- 0x00000001,0x00000001,0x00000001,0x00000001},
- {0x00000000,0x00000000,0x00000001,0x00000001,
- 0x00000001,0x00000009,0x00000009,0x00000009},
- {0x00000000,0x00000000,0x00000009,0x00000001,
- 0x00000009,0x00000009,0x00000009,0x00000009},
- {0x00000000,0x00000000,0x00000009,0x00000009,
- 0x00000009,0x00000009,0x00000049,0x00000009},
- {0x00000000,0x00000000,0x00000009,0x00000009,
- 0x00000009,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000009,0x00000009,
- 0x00000049,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000009,0x00000049,
- 0x00000049,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000249,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000249,0x00000249,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000249,0x00000249,0x00001252,0x0000024a},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000249,0x0000124a,0x00001252,0x0000024a},
- {0x00000000,0x00000000,0x00000049,0x00000249,
- 0x00000249,0x0000124a,0x00001252,0x0000024a},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x0000124a,0x00009252,0x00009292,0x00001252},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 0, passes 1 */
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000},
- {0x00000000,0x00000000,0x00000001,0x00000001,
- 0x00000001,0x00000001,0x00000000,0x00000000},
- {0x00000000,0x00000000,0x00000009,0x00000001,
- 0x00000001,0x00000009,0x00000000,0x00000000},
- {0x00000000,0x00000000,0x00000009,0x00000009,
- 0x00000009,0x00000009,0x00000000,0x00000000},
- {0x00000000,0x00000000,0x00000009,0x00000009,
- 0x00000009,0x00000009,0x00000001,0x00000000},
- {0x00000000,0x00000000,0x00000049,0x00000009,
- 0x00000009,0x00000049,0x00000001,0x00000001},
- {0x00000000,0x00000000,0x00000049,0x00000009,
- 0x00000009,0x00000049,0x00000001,0x00000001},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000009,0x00000001},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000009,0x00000001},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000009,0x00000001},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000009,0x00000009},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000249,0x00000049,0x00000009},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000249,0x00000049,0x00000009},
- {0x00000000,0x00000000,0x00000249,0x00000049,
- 0x00000249,0x00000249,0x00000049,0x00000009},
- {0x00000000,0x00000000,0x00001249,0x00000249,
- 0x0000124a,0x0000124a,0x0000024a,0x00000049},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 1 */
- { /* version 1, passes 0 */
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000001},
- {0x00000000,0x00000000,0x00000001,0x00000001,
- 0x00000001,0x00000009,0x00000009,0x00000009},
- {0x00000000,0x00000000,0x00000009,0x00000009,
- 0x00000009,0x00000009,0x00000009,0x00000009},
- {0x00000000,0x00000000,0x00000009,0x00000009,
- 0x00000009,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000009,0x00000049,
- 0x00000049,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000249,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000249,0x00000249,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000049,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x00001252},
- {0x00000000,0x00000000,0x00000049,0x00000249,
- 0x00000249,0x0000124a,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00000049,0x00000249,
- 0x0000124a,0x0000124a,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x0000124a,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x0000124a,0x00009252,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x00009252,0x00009252,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x0000924a,
- 0x00009292,0x00009493,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x00009252,
- 0x00009492,0x0000a49b,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 1, passes 1 */
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000},
- {0x00000000,0x00000000,0x00000009,0x00000009,
- 0x00000009,0x00000001,0x00000001,0x00000000},
- {0x00000000,0x00000000,0x00000009,0x00000009,
- 0x00000009,0x00000009,0x00000001,0x00000000},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000009,0x00000001,0x00000000},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000001,0x00000001},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000009,0x00000001},
- {0x00000000,0x00000000,0x00000249,0x00000049,
- 0x00000049,0x00000249,0x00000009,0x00000001},
- {0x00000000,0x00000000,0x00000249,0x00000049,
- 0x00000249,0x00000249,0x00000009,0x00000009},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x00000249,0x00000049,0x00000009},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x0000124a,0x00000049,0x00000009},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x0000124a,0x00000049,0x00000009},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x0000124a,0x0000024a,0x00000049},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x0000124a,0x0000024a,0x00000049},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x0000124a,0x0000024a,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009252,0x00001252,0x0000024a},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 2 */
- { /* version 2, passes 0 */
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000001},
- {0x00000000,0x00000000,0x00000009,0x00000009,
- 0x00000009,0x00000009,0x00000009,0x00000009},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000249,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000049,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x00001252},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x0000124a,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x0000124a,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x0000124a,0x00009252,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x00009252,0x00009292,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x00009252,0x00009292,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x0000924a,
- 0x00009252,0x00009493,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x0000924a,
- 0x00009292,0x00009493,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x00009252,
- 0x00009492,0x00009493,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x000124db,0x000124db,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000126dc,0x000126dc,0x000126dc},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 2, passes 1 */
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000},
- {0x00000000,0x00000000,0x00000049,0x00000009,
- 0x00000049,0x00000009,0x00000001,0x00000000},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000049,0x00000000},
- {0x00000000,0x00000000,0x00000249,0x00000049,
- 0x00000249,0x00000049,0x0000024a,0x00000001},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x00000001},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x00000001},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x00000009},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x0000124a,0x0000024a,0x00000009},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x0000124a,0x0000024a,0x00000009},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x00009252,0x00001252,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x00009292,0x00001252,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x00009292,0x00001252,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00001252,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009292,0x00009292,0x00001252,0x0000024a},
- {0x00000000,0x00000000,0x0000924a,0x0000924a,
- 0x00009492,0x00009493,0x00009292,0x00001252},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 3 */
- { /* version 3, passes 0 */
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000001},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000049,0x00000249,
- 0x00000249,0x00000249,0x00001252,0x0000024a},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x0000124a,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x00009252,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x0000124a,0x00009292,0x00009292,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x00009252,0x00009292,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x00009292,0x00009493,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x00009252,
- 0x00009292,0x00009493,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00001249,0x00009252,
- 0x00009292,0x0000a49b,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00001249,0x00009252,
- 0x00009492,0x0000a49b,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x0000a49b,0x000124db,0x000124db},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x0000a493,0x0000a49b,0x000124db,0x000124db},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0001249b,0x000126dc,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000136e4,0x0001b725,0x000136e4},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 3, passes 1 */
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000},
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000001,0x00000000},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x00000249,0x00000049,0x00000001},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x0000124a,0x00001252,0x00000001},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x0000124a,0x00001252,0x00000009},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x0000124a,0x00009252,0x00009292,0x00000009},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x00009252,0x00009292,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009252,0x00009292,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009493,0x00009292,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009493,0x00009292,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009493,0x00009493,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009292,0x00009493,0x00009493,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009492,0x00009493,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009252,
- 0x00009492,0x0000a49b,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x00009292,
- 0x0000a493,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 4 */
- { /* version 4, passes 0 */
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x0000124a,0x00001252,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x00009252,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x0000124a,0x00009292,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x00009252,0x00009493,0x00009493,0x0000a49b},
- {0x00000000,0x00000000,0x00000249,0x0000924a,
- 0x00009292,0x00009493,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009292,0x00009493,0x0000a49b,0x000124db},
- {0x00000000,0x00000000,0x00001249,0x00009252,
- 0x00009492,0x0000a49b,0x0000a49b,0x000124db},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x000124db,0x000124db,0x000126dc},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x0000a493,0x000124db,0x000126dc,0x000126dc},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x000136e4},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000126dc,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0001249b,0x000126dc,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000136e4,0x000136e4,0x0001b724},
- {0x00000000,0x00000000,0x00009252,0x000124db,
- 0x000126dc,0x0001b724,0x0001b725,0x0001b925},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 4, passes 1 */
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00000249,
- 0x0000124a,0x0000124a,0x00001252,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x0000124a,0x00009292,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009292,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x0000a49b,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009292,0x00009493,0x0000a49b,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009292,0x00009493,0x0000a49b,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009492,0x0000a49b,0x0000a49b,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00009252,
- 0x00009492,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x0000a49b,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x00009252,0x0000a49b,
- 0x0001249b,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 5 */
- { /* version 5, passes 0 */
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x0000124a,0x00001252,0x00009292},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x0000124a,0x00009292,0x00009292,0x00009493},
- {0x00000000,0x00000000,0x00000249,0x0000924a,
- 0x00009292,0x00009493,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009292,0x00009493,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009492,0x0000a49b,0x0000a49b,0x000124db},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x0000a49b,0x000124db,0x000124db},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x0000a493,0x000124db,0x000124db,0x000126dc},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x000126dc},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000126dc,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0001249b,0x000126dc,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0001249b,0x000126dc,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0001249b,0x000126dc,0x0001b725,0x0001b724},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000126dc,0x0001b725,0x0001b724},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x000136e4,0x0001b92d,0x0001b925},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b724,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 5, passes 1 */
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x00000249,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x0000124a,0x00001252,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009292,0x00009493,0x00009493,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009292,0x00009493,0x00009493,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009292,0x00009493,0x0000a49b,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009492,0x00009493,0x000124db,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x00009493,0x000124db,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x0000a49b,0x000124db,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x0000a49b,0x000124db,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000124db,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000124db,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000124db,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009252,0x000124db,
- 0x000126dc,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 6 */
- { /* version 6, passes 0 */
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x0000124a,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009292,0x00009493,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009492,0x0000a49b,0x0000a49b,0x000124db},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x000124db,0x000126dc,0x000126dc},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x000126dc},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000126dc,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000126dc,0x000136e4,0x0001b724},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0001249b,0x000126dc,0x000136e4,0x0001b724},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x0001b724},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000136e4,0x0001b725,0x0001b724},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000136e4,0x0001b725,0x0001b925},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x000136e4,0x0001b92d,0x0001b925},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001b92d,0x0001c92d},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000126dc,0x0001b724,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x000136e4,0x0001b925,0x00025bb6,0x00024b77},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 6, passes 1 */
- {0x00000000,0x00000000,0x00001249,0x00000249,
- 0x0000124a,0x0000124a,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009292,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009492,0x00009493,0x0000a49b,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00009252,
- 0x00009492,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x0000a49b,0x000126dc,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x0000a49b,0x000126dc,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x0000a49b,0x000126dc,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x000124db,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00009492,0x0000a49b,
- 0x000136e4,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x0001b724,0x0001b724,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 7 */
- { /* version 7, passes 0 */
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009292,0x00009493,0x0000a49b,0x000124db},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x0000a493,0x0000a49b,0x000124db,0x000126dc},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x000136e4},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0001249b,0x000126dc,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00001249,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x0001b724},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x0001b724},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000136e4,0x0001b725,0x0001b724},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x000136e4,0x0001b725,0x0001b925},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001b92d,0x0001b925},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x00009292,0x000124db,
- 0x000126dc,0x0001b724,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b724,0x0001c96e,0x0002496e},
- {0x00000000,0x00000000,0x00009492,0x000126db,
- 0x000136e4,0x0001b925,0x0001c96e,0x0002496e},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b724,0x0002496d,0x00025bb6,0x00025bbf},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 7, passes 1 */
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009492,0x00009493,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x0000a49b,0x000124db,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000124db,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x000124db,0x000136e4,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x000124db,0x000136e4,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000124db,0x000136e4,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x000136e4,0x000136e4,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x000136e4,0x000136e4,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000136e4,0x000136e4,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x000136e4,0x0001b724,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00012492,0x000126db,
- 0x0001b724,0x0001b925,0x0001b725,0x000136e4},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 8 */
- { /* version 8, passes 0 */
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009292,0x00009493,0x0000a49b,0x000124db},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x0000a493,0x000124db,0x000126dc,0x000126dc},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x000136e4},
- {0x00000000,0x00000000,0x00001249,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x0001b724},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x0001b724},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000136e4,0x0001b725,0x0001b724},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x000136e4,0x0001b725,0x0001b925},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001b92d,0x0001c92d},
- {0x00000000,0x00000000,0x00009252,0x000124db,
- 0x000126dc,0x0001b724,0x0001b92d,0x0001c92d},
- {0x00000000,0x00000000,0x00009292,0x000124db,
- 0x000126dc,0x0001b925,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b925,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b925,0x00024b76,0x00024b77},
- {0x00000000,0x00000000,0x00009492,0x000126db,
- 0x000136e4,0x0001b925,0x00024b76,0x00025bbf},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x000136e4,0x0001c92d,0x00024b76,0x00025bbf},
- {0x00000000,0x00000000,0x00012492,0x000136db,
- 0x0001b724,0x00024b6d,0x0002ddb6,0x0002efff},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 8, passes 1 */
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009493,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x0000a493,0x0000a49b,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x0000a49b,0x000124db,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x000124db,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x000124db,0x000136e4,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x000126dc,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x000136e4,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000126dc,0x000136e4,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000126dc,0x000136e4,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00009292,0x000124db,
- 0x000136e4,0x0001b724,0x0001b725,0x000136e4},
- {0x00000000,0x00000000,0x00009492,0x000126db,
- 0x000136e4,0x0001b925,0x0001b725,0x0001b724},
- {0x00000000,0x00000000,0x00009492,0x000126db,
- 0x000136e4,0x0001b925,0x0001b725,0x0001b724},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b724,0x0002496d,0x0001b92d,0x0001b925},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 9 */
- { /* version 9, passes 0 */
- {0x00000000,0x00000000,0x00000049,0x00000049,
- 0x00000049,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00000249,0x00000049,
- 0x00000249,0x00000249,0x0000024a,0x00000049},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x0000124a,0x00009252,0x00001252,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009493,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009292,0x00009493,0x00009493,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000124db,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0001249b,0x000126dc,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00009252,0x00009493,
- 0x000124db,0x000136e4,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00009252,0x0000a49b,
- 0x000124db,0x000136e4,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x000136e4,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00009492,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001b725,0x0001b724},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x000136e4,0x0001b925,0x0001b92d,0x0001b925},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 9, passes 1 */
- {0x00000000,0x00000000,0x00000249,0x00000049,
- 0x00000009,0x00000009,0x00000009,0x00000009},
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000049,0x00000049,0x00000009,0x00000009},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x00000249,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x0000124a,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x0000124a,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009252,0x0000124a,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x00009252,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x00009292,0x00009292,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x00009292,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x00009493,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000124db,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000136e4,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009252,0x000124db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 10 */
- { /* version 10, passes 0 */
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00000249,0x00001249,
- 0x00009252,0x00009292,0x00009292,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009292,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009492,0x00009493,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x000124db,0x000124db,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000124db,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0001249b,0x000126dc,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000126dc,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00009252,0x0000a49b,
- 0x000124db,0x000136e4,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x000136e4,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x00009492,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001b92d,0x0001b724},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000126dc,0x0001b925,0x0001b92d,0x0001b925},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x000136e4,0x0002496d,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 10, passes 1 */
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000049,0x00000049,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x00000249,0x00000049,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x00009252,0x0000024a,0x00000049},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009493,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00009252,
- 0x00009492,0x00009493,0x00001252,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x00009493,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x00009492,0x00009493,0x00009292,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x00009493,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x0000a49b,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x0000a49b,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000136e4,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000136e4,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009252,0x000126db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 11 */
- { /* version 11, passes 0 */
- {0x00000000,0x00000000,0x00000249,0x00000249,
- 0x00000249,0x00000249,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009292,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009492,0x0000a49b,0x0000a49b,0x00009292},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x0000a49b,0x000124db,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000126dc,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x000136e4,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x000136e4,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001b725,0x000136e4},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000136e4,0x0001b724,0x0001b92d,0x0001b724},
- {0x00000000,0x00000000,0x00009492,0x0000a49b,
- 0x000136e4,0x0001b724,0x0001b92d,0x0001b724},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b925,0x0001c96e,0x0001b925},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x0001b724,0x0001b925,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x0001c924,0x0002496d,0x00025bb6,0x00024b77},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 11, passes 1 */
- {0x00000000,0x00000000,0x00001249,0x00000249,
- 0x00000249,0x00000249,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x0000124a,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009252,0x00009252,0x0000024a,0x0000024a},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x0000a49b,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x0000a49b,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x0000a49b,0x00009292,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000124db,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000124db,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000126dc,0x000126dc,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000136e4,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009292,0x000124db,
- 0x000136e4,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009492,0x000126db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 12 */
- { /* version 12, passes 0 */
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x0000a493,0x0000a49b,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x000126dc,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x000136e4,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001b725,0x000126dc},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000136e4,0x0001b724,0x0001b92d,0x000136e4},
- {0x00000000,0x00000000,0x00009492,0x0000a49b,
- 0x000136e4,0x0001b724,0x0001b92d,0x0001b724},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b724,0x0001b92d,0x0001b724},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b925,0x0001b92d,0x0001b925},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x0001b724,0x0001b925,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x0001b724,0x0001c92d,0x0001c96e,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x0001b724,0x0001c92d,0x00024b76,0x0002496e},
- {0x00000000,0x00000000,0x00012492,0x000126db,
- 0x0001c924,0x00024b6d,0x0002ddb6,0x00025bbf},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 12, passes 1 */
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x0000124a,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x00001249,0x00009292,
- 0x00009492,0x00009252,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x00009292,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x0000a49b,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000124db,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000124db,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000126dc,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000126dc,0x000126dc,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000136e4,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009492,0x000126db,
- 0x000136e4,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009492,0x000126db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00009492,0x000126db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001c924,0x0001b724,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 13 */
- { /* version 13, passes 0 */
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x00009252,0x00009292,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x000124db,0x000126dc,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x0000a49b,
- 0x0001249b,0x000126dc,0x000126dc,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x000136e4,0x0001b725,0x000124db},
- {0x00000000,0x00000000,0x00009292,0x0000a49b,
- 0x000136e4,0x0001b724,0x0001b725,0x000126dc},
- {0x00000000,0x00000000,0x00009292,0x000124db,
- 0x000136e4,0x0001b724,0x0001b725,0x000126dc},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b724,0x0001c96e,0x000136e4},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001c92d,0x0001c96e,0x0001b724},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x000136e4,0x0001c92d,0x0001c96e,0x0001b724},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x0001b724,0x0001c92d,0x0001c96e,0x0001b925},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x0001b724,0x0001c92d,0x00024b76,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x0001b924,0x0001c92d,0x00024b76,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x0001b924,0x0001c92d,0x00024b76,0x0002496e},
- {0x00000000,0x00000000,0x00012492,0x000136db,
- 0x00024924,0x00024b6d,0x0002ddb6,0x00025bbf},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 13, passes 1 */
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x0000124a,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x00009492,0x00009292,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x0000a49b,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000126dc,0x000124db,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000136e4,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000136db,
- 0x0001b724,0x000124db,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000136db,
- 0x0001b724,0x000126dc,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00009292,0x000136db,
- 0x0001b724,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x00009492,0x000136db,
- 0x0001b724,0x000126dc,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00012492,0x0001b6db,
- 0x0001c924,0x0001b724,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 14 */
- { /* version 14, passes 0 */
- {0x00000000,0x00000000,0x00001249,0x0000924a,
- 0x00009292,0x00009493,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00001249,0x0000a49b,
- 0x0000a493,0x000124db,0x000126dc,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x0000a49b},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000126dc,0x000136e4,0x0001b725,0x000124db},
- {0x00000000,0x00000000,0x00009292,0x000124db,
- 0x000126dc,0x0001b724,0x0001b92d,0x000126dc},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b724,0x0001b92d,0x000126dc},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001c92d,0x0001c96e,0x000136e4},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x0001b724,0x0001c92d,0x0001c96e,0x0001b724},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x0001b724,0x0001c92d,0x00024b76,0x0001b925},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x0001b724,0x0001c92d,0x00024b76,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x0001b724,0x0001c92d,0x00024b76,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b724,0x0001c92d,0x00024b76,0x0002496e},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b924,0x0002496d,0x00024b76,0x00024b77},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b924,0x00024b6d,0x0002ddb6,0x00025bbf},
- {0x00000000,0x00000000,0x00012492,0x0001b6db,
- 0x00024924,0x0002db6d,0x00036db6,0x0002efff},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 14, passes 1 */
- {0x00000000,0x00000000,0x00001249,0x00001249,
- 0x0000124a,0x0000124a,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x00009493,
- 0x0000a493,0x00009292,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x0000a49b,0x00001252,0x00001252},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000136e4,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000136e4,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000136e4,0x000136e4,0x00009493,0x00009292},
- {0x00000000,0x00000000,0x00009492,0x000136db,
- 0x0001b724,0x000136e4,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x00009492,0x000136db,
- 0x0001b724,0x000136e4,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x00009492,0x000136db,
- 0x0001b724,0x000136e4,0x0000a49b,0x00009493},
- {0x00000000,0x00000000,0x00009492,0x000136db,
- 0x0001b724,0x000136e4,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b724,0x000136e4,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b724,0x000136e4,0x000124db,0x0000a49b},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b724,0x000136e4,0x000126dc,0x000124db},
- {0x00000000,0x00000000,0x00012492,0x0001b6db,
- 0x0001c924,0x0001b724,0x000136e4,0x000126dc},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- },
- { /* version 15 */
- { /* version 15, passes 0 */
- {0x00000000,0x00000000,0x00001249,0x00009493,
- 0x0000a493,0x0000a49b,0x000124db,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0001249b,0x000126dc,0x000136e4,0x000124db},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x000126dc,0x0001b724,0x0001b725,0x000126dc},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000136e4,0x0001b724,0x0001b92d,0x000126dc},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x000136e4,0x0001b925,0x0001c96e,0x000136e4},
- {0x00000000,0x00000000,0x00009492,0x000124db,
- 0x0001b724,0x0001c92d,0x0001c96e,0x0001b724},
- {0x00000000,0x00000000,0x0000a492,0x000124db,
- 0x0001b724,0x0001c92d,0x0001c96e,0x0001b724},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x0001b724,0x0001c92d,0x0001c96e,0x0001b925},
- {0x00000000,0x00000000,0x0000a492,0x000126db,
- 0x0001b924,0x0001c92d,0x00024b76,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b924,0x0001c92d,0x00024b76,0x0001c92d},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001b924,0x0002496d,0x00024b76,0x0002496e},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001c924,0x0002496d,0x00025bb6,0x00024b77},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001c924,0x00024b6d,0x00025bb6,0x00024b77},
- {0x00000000,0x00000000,0x00012492,0x000136db,
- 0x0001c924,0x00024b6d,0x0002ddb6,0x00025bbf},
- {0x00000000,0x00000000,0x00012492,0x0001b6db,
- 0x00024924,0x0002db6d,0x00036db6,0x0002efff},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- },
- { /* version 15, passes 1 */
- {0x00000000,0x00000000,0x0000924a,0x0000924a,
- 0x00009292,0x00009292,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x0000a49b,
- 0x0000a493,0x000124db,0x00009292,0x00009292},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000124db,0x0001b724,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000126dc,0x0001b724,0x00009493,0x00009493},
- {0x00000000,0x00000000,0x0000924a,0x000124db,
- 0x000136e4,0x0001b724,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00009292,0x000136db,
- 0x0001b724,0x0001b724,0x0000a49b,0x0000a49b},
- {0x00000000,0x00000000,0x00009492,0x000136db,
- 0x0001c924,0x0001b724,0x000124db,0x000124db},
- {0x00000000,0x00000000,0x00009492,0x000136db,
- 0x0001c924,0x0001b724,0x000124db,0x000124db},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001c924,0x0001b724,0x000126dc,0x000126dc},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001c924,0x0001b925,0x000126dc,0x000126dc},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001c924,0x0001b925,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001c924,0x0001b925,0x000136e4,0x000136e4},
- {0x00000000,0x00000000,0x0000a492,0x000136db,
- 0x0001c924,0x0001b925,0x0001b725,0x0001b724},
- {0x00000000,0x00000000,0x00012492,0x000136db,
- 0x0001c924,0x0001b925,0x0001b725,0x0001b724},
- {0x00000000,0x00000000,0x00012492,0x0001b6db,
- 0x00024924,0x0002496d,0x0001b92d,0x0001b925},
- {0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000}
- }
- }
-};
diff --git a/drivers/usb/media/pwc/pwc-uncompress.c b/drivers/usb/media/pwc/pwc-uncompress.c
index c062e43..bc3b163 100644
--- a/drivers/usb/media/pwc/pwc-uncompress.c
+++ b/drivers/usb/media/pwc/pwc-uncompress.c
@@ -29,8 +29,6 @@
#include "pwc.h"
#include "pwc-uncompress.h"
-#include "pwc-dec1.h"
-#include "pwc-dec23.h"
int pwc_decompress(struct pwc_device *pdev)
{
@@ -122,6 +120,7 @@
switch (pdev->type)
{
+#if 0
case 675:
case 680:
case 690:
@@ -137,6 +136,7 @@
case 645:
case 646:
/* TODO & FIXME */
+#endif
return -ENXIO; /* No such device or address: missing decompressor */
break;
}
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index db64c90..b104430 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -219,17 +219,21 @@
by some sample firmware from Epson.
config USB_ZAURUS
- boolean "Sharp Zaurus (stock ROMs)"
+ boolean "Sharp Zaurus (stock ROMs) and compatible"
depends on USB_USBNET
select CRC32
default y
help
Choose this option to support the usb networking links used by
Zaurus models like the SL-5000D, SL-5500, SL-5600, A-300, B-500.
+ This also supports some related device firmware, as used in some
+ PDAs from Olympus and some cell phones from Motorola.
- If you install an alternate ROM image, you may no longer need
- to support this protocol. Only the "eth-fd" driver really needs
- this non-conformant variant of CDC Ethernet protocol.
+ If you install an alternate ROM image, such as the Linux 2.6 based
+ versions of OpenZaurus, you should no longer need to support this
+ protocol. Only the "eth-fd" or "net_fd" drivers in these devices
+ really need this non-conformant variant of CDC Ethernet (or in
+ some cases CDC MDLM) protocol, not "g_ether".
config USB_CDCETHER
boolean "CDC Ethernet support (smart devices such as cable modems)"
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index f6bc6b3..4cbb408 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -1517,6 +1517,26 @@
}
}
+#endif /* NEED_GENERIC_CDC */
+
+
+#ifdef CONFIG_USB_CDCETHER
+#define HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * Communications Device Class, Ethernet Control model
+ *
+ * Takes two interfaces. The DATA interface is inactive till an altsetting
+ * is selected. Configuration data includes class descriptors.
+ *
+ * This should interop with whatever the 2.4 "CDCEther.c" driver
+ * (by Brad Hards) talked with.
+ *
+ *-------------------------------------------------------------------------*/
+
+#include <linux/ctype.h>
+
static void dumpspeed (struct usbnet *dev, __le32 *speeds)
{
@@ -1567,26 +1587,6 @@
}
}
-#endif /* NEED_GENERIC_CDC */
-
-
-#ifdef CONFIG_USB_CDCETHER
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Communications Device Class, Ethernet Control model
- *
- * Takes two interfaces. The DATA interface is inactive till an altsetting
- * is selected. Configuration data includes class descriptors.
- *
- * This should interop with whatever the 2.4 "CDCEther.c" driver
- * (by Brad Hards) talked with.
- *
- *-------------------------------------------------------------------------*/
-
-#include <linux/ctype.h>
-
static u8 nibble (unsigned char c)
{
if (likely (isdigit (c)))
@@ -2765,7 +2765,7 @@
}
/* expect bcdVersion 1.0, ignore */
if (memcmp(&desc->bGUID, blan_guid, 16)
- || memcmp(&desc->bGUID, blan_guid, 16) ) {
+ && memcmp(&desc->bGUID, safe_guid, 16) ) {
/* hey, this one might _really_ be MDLM! */
dev_dbg (&intf->dev, "MDLM guid\n");
goto bad_desc;
@@ -2797,11 +2797,13 @@
* - bPad (ignored, for PADAFTER -- BLAN-only)
* bits are:
* - 0x01 -- Zaurus framing (add CRC)
- * - 0x02 -- PADBEFORE
- * - 0x04 -- PADAFTER
+ * - 0x02 -- PADBEFORE (CRC includes some padding)
+ * - 0x04 -- PADAFTER (some padding after CRC)
* - 0x08 -- "fermat" packet mangling (for hw bugs)
+ * the PADBEFORE appears not to matter; we interop
+ * with devices that use it and those that don't.
*/
- if (detail->bDetailData[1] != 0x01) {
+ if ((detail->bDetailData[1] & ~02) != 0x01) {
/* bmDataCapabilites == 0 would be fine too,
* but framing is minidriver-coupled for now.
*/
@@ -4071,9 +4073,6 @@
USB_DEVICE (0x8086, 0x07d3), // "blob" bootloader
.driver_info = (unsigned long) &blob_info,
}, {
- USB_DEVICE (0x22b8, 0x600c), // USBNET Motorola E680
- .driver_info = (unsigned long) &linuxdev_info,
-}, {
// Linux Ethernet/RNDIS gadget on pxa210/25x/26x
// e.g. Gumstix, current OpenZaurus, ...
USB_DEVICE_VER (0x0525, 0xa4a2, 0x0203, 0x0203),
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index bc798ed..9438909 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -455,6 +455,17 @@
To compile this driver as a module, choose M here: the
module will be called keyspan_pda.
+config USB_SERIAL_OPTION
+ tristate "USB Option PCMCIA serial driver"
+ depends on USB_SERIAL && USB_OHCI_HCD && PCCARD
+ help
+ Say Y here if you want to use an Option card. This is a
+ GSM card, controlled by three serial ports which are connected
+ via an OHCI adapter located on a PC card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called option.
+
config USB_SERIAL_OMNINET
tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
depends on USB_SERIAL && EXPERIMENTAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index d56ff6d..6c7cdcc 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -32,6 +32,7 @@
obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o
obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
+obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o
obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 7e9bb63..4ace996 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -7,6 +7,14 @@
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
+ * Support to set flow control line levels using TIOCMGET and TIOCMSET
+ * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
+ * control thanks to Munir Nassar nassarmu@real-time.com
+ *
+ * Outstanding Issues:
+ * Buffers are not flushed when the port is opened.
+ * Multiple calls to write() may fail with "Resource temporarily unavailable"
+ *
*/
#include <linux/config.h>
@@ -24,7 +32,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.03"
+#define DRIVER_VERSION "v0.04"
#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
/*
@@ -35,6 +43,9 @@
static void cp2101_close(struct usb_serial_port*, struct file*);
static void cp2101_get_termios(struct usb_serial_port*);
static void cp2101_set_termios(struct usb_serial_port*, struct termios*);
+static int cp2101_tiocmget (struct usb_serial_port *, struct file *);
+static int cp2101_tiocmset (struct usb_serial_port *, struct file *,
+ unsigned int, unsigned int);
static void cp2101_break_ctl(struct usb_serial_port*, int);
static int cp2101_startup (struct usb_serial *);
static void cp2101_shutdown(struct usb_serial*);
@@ -43,9 +54,10 @@
static int debug;
static struct usb_device_id id_table [] = {
- {USB_DEVICE(0x10c4, 0xea60) }, /*Silicon labs factory default*/
- {USB_DEVICE(0x10ab, 0x10c5) }, /*Siemens MC60 Cable*/
- { } /* Terminating Entry*/
+ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+ { } /* Terminating Entry */
};
MODULE_DEVICE_TABLE (usb, id_table);
@@ -70,32 +82,35 @@
.close = cp2101_close,
.break_ctl = cp2101_break_ctl,
.set_termios = cp2101_set_termios,
+ .tiocmget = cp2101_tiocmget,
+ .tiocmset = cp2101_tiocmset,
.attach = cp2101_startup,
.shutdown = cp2101_shutdown,
};
-/*Config request types*/
+/* Config request types */
#define REQTYPE_HOST_TO_DEVICE 0x41
#define REQTYPE_DEVICE_TO_HOST 0xc1
-/*Config SET requests. To GET, add 1 to the request number*/
-#define CP2101_UART 0x00 /*Enable / Disable*/
-#define CP2101_BAUDRATE 0x01 /*(BAUD_RATE_GEN_FREQ / baudrate)*/
-#define CP2101_BITS 0x03 /*0x(0)(data bits)(parity)(stop bits)*/
-#define CP2101_BREAK 0x05 /*On / Off*/
-#define CP2101_DTRRTS 0x07 /*101 / 202 ???*/
-#define CP2101_CONFIG_16 0x13 /*16 bytes of config data ???*/
-#define CP2101_CONFIG_6 0x19 /*6 bytes of config data ???*/
+/* Config SET requests. To GET, add 1 to the request number */
+#define CP2101_UART 0x00 /* Enable / Disable */
+#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */
+#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */
+#define CP2101_BREAK 0x05 /* On / Off */
+#define CP2101_CONTROL 0x07 /* Flow control line states */
+#define CP2101_MODEMCTL 0x13 /* Modem controls */
+#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */
-/*CP2101_UART*/
+/* CP2101_UART */
#define UART_ENABLE 0x0001
#define UART_DISABLE 0x0000
-/*CP2101_BAUDRATE*/
+/* CP2101_BAUDRATE */
#define BAUD_RATE_GEN_FREQ 0x384000
-/*CP2101_BITS*/
+/* CP2101_BITS */
#define BITS_DATA_MASK 0X0f00
+#define BITS_DATA_5 0X0500
#define BITS_DATA_6 0X0600
#define BITS_DATA_7 0X0700
#define BITS_DATA_8 0X0800
@@ -112,64 +127,137 @@
#define BITS_STOP_1 0x0000
#define BITS_STOP_1_5 0x0001
#define BITS_STOP_2 0x0002
+
+/* CP2101_BREAK */
#define BREAK_ON 0x0000
#define BREAK_OFF 0x0001
+/* CP2101_CONTROL */
+#define CONTROL_DTR 0x0001
+#define CONTROL_RTS 0x0002
+#define CONTROL_CTS 0x0010
+#define CONTROL_DSR 0x0020
+#define CONTROL_RING 0x0040
+#define CONTROL_DCD 0x0080
+#define CONTROL_WRITE_DTR 0x0100
+#define CONTROL_WRITE_RTS 0x0200
-static int cp2101_get_config(struct usb_serial_port* port, u8 request)
+/*
+ * cp2101_get_config
+ * Reads from the CP2101 configuration registers
+ * 'size' is specified in bytes.
+ * 'data' is a pointer to a pre-allocated array of integers large
+ * enough to hold 'size' bytes (with 4 bytes to each integer)
+ */
+static int cp2101_get_config(struct usb_serial_port* port, u8 request,
+ unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
- unsigned char buf[4];
- unsigned int value;
- int result, i;
+ u32 *buf;
+ int result, i, length;
- /*For get requests, the request number must be incremented*/
+ /* Number of integers required to contain the array */
+ length = (((size - 1) | 3) + 1)/4;
+
+ buf = kmalloc (length * sizeof(u32), GFP_KERNEL);
+ memset(buf, 0, length * sizeof(u32));
+
+ if (!buf) {
+ dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ /* For get requests, the request number must be incremented */
request++;
- /*Issue the request, attempting to read 4 bytes*/
+ /* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg (serial->dev,usb_rcvctrlpipe (serial->dev, 0),
request, REQTYPE_DEVICE_TO_HOST, 0x0000,
- 0, buf, 4, 300);
+ 0, buf, size, 300);
- if (result < 0) {
+ /* Convert data into an array of integers */
+ for (i=0; i<length; i++)
+ data[i] = le32_to_cpu(buf[i]);
+
+ kfree(buf);
+
+ if (result != size) {
dev_err(&port->dev, "%s - Unable to send config request, "
- "request=0x%x result=%d\n",
- __FUNCTION__, request, result);
- return result;
+ "request=0x%x size=%d result=%d\n",
+ __FUNCTION__, request, size, result);
+ return -EPROTO;
}
- /*Assemble each byte read into an integer value*/
- value = 0;
- for (i=0; i<4 && i<result; i++)
- value |= (buf[i] << (i * 8));
-
- dbg( " %s - request=0x%x result=%d value=0x%x",
- __FUNCTION__, request, result, value);
-
- return value;
-}
-
-static int cp2101_set_config(struct usb_serial_port* port, u8 request, u16 value)
-{
- struct usb_serial *serial = port->serial;
- int result;
- result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0),
- request, REQTYPE_HOST_TO_DEVICE, value,
- 0, NULL, 0, 300);
-
- if (result <0) {
- dev_err(&port->dev, "%s - Unable to send config request, "
- "request=0x%x value=0x%x result=%d\n",
- __FUNCTION__, request, value, result);
- return result;
- }
-
- dbg(" %s - request=0x%x value=0x%x result=%d",
- __FUNCTION__, request, value, result);
-
return 0;
}
+/*
+ * cp2101_set_config
+ * Writes to the CP2101 configuration registers
+ * Values less than 16 bits wide are sent directly
+ * 'size' is specified in bytes.
+ */
+static int cp2101_set_config(struct usb_serial_port* port, u8 request,
+ unsigned int *data, int size)
+{
+ struct usb_serial *serial = port->serial;
+ u32 *buf;
+ int result, i, length;
+
+ /* Number of integers required to contain the array */
+ length = (((size - 1) | 3) + 1)/4;
+
+ buf = kmalloc(length * sizeof(u32), GFP_KERNEL);
+ if (!buf) {
+ dev_err(&port->dev, "%s - out of memory.\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ /* Array of integers into bytes */
+ for (i = 0; i < length; i++)
+ buf[i] = cpu_to_le32(data[i]);
+
+ if (size > 2) {
+ result = usb_control_msg (serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ request, REQTYPE_HOST_TO_DEVICE, 0x0000,
+ 0, buf, size, 300);
+ } else {
+ result = usb_control_msg (serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ request, REQTYPE_HOST_TO_DEVICE, data[0],
+ 0, NULL, 0, 300);
+ }
+
+ kfree(buf);
+
+ if ((size > 2 && result != size) || result < 0) {
+ dev_err(&port->dev, "%s - Unable to send request, "
+ "request=0x%x size=%d result=%d\n",
+ __FUNCTION__, request, size, result);
+ return -EPROTO;
+ }
+
+ /* Single data value */
+ result = usb_control_msg (serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ request, REQTYPE_HOST_TO_DEVICE, data[0],
+ 0, NULL, 0, 300);
+ return 0;
+}
+
+/*
+ * cp2101_set_config_single
+ * Convenience function for calling cp2101_set_config on single data values
+ * without requiring an integer pointer
+ */
+static inline int cp2101_set_config_single(struct usb_serial_port* port,
+ u8 request, unsigned int data)
+{
+ return cp2101_set_config(port, request, &data, 2);
+}
+
static int cp2101_open (struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial = port->serial;
@@ -177,7 +265,7 @@
dbg("%s - port %d", __FUNCTION__, port->number);
- if (cp2101_set_config(port, CP2101_UART, UART_ENABLE)) {
+ if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) {
dev_err(&port->dev, "%s - Unable to enable UART\n",
__FUNCTION__);
return -EPROTO;
@@ -198,9 +286,12 @@
return result;
}
- /*Configure the termios structure*/
+ /* Configure the termios structure */
cp2101_get_termios(port);
+ /* Set the DTR and RTS pins low */
+ cp2101_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0);
+
return 0;
}
@@ -228,16 +319,18 @@
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
- cp2101_set_config(port, CP2101_UART, UART_DISABLE);
+ cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
}
-/* cp2101_get_termios*/
-/* Reads the baud rate, data bits, parity and stop bits from the device*/
-/* Corrects any unsupported values*/
-/* Configures the termios structure to reflect the state of the device*/
+/*
+ * cp2101_get_termios
+ * Reads the baud rate, data bits, parity, stop bits and flow control mode
+ * from the device, corrects any unsupported values, and configures the
+ * termios structure to reflect the state of the device
+ */
static void cp2101_get_termios (struct usb_serial_port *port)
{
- unsigned int cflag;
+ unsigned int cflag, modem_ctl[4];
int baud;
int bits;
@@ -249,15 +342,16 @@
}
cflag = port->tty->termios->c_cflag;
- baud = cp2101_get_config(port, CP2101_BAUDRATE);
- /*Convert to baudrate*/
+ cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
+ /* Convert to baudrate */
if (baud)
baud = BAUD_RATE_GEN_FREQ / baud;
dbg("%s - baud rate = %d", __FUNCTION__, baud);
cflag &= ~CBAUD;
switch (baud) {
- /* The baud rates which are commented out below
+ /*
+ * The baud rates which are commented out below
* appear to be supported by the device
* but are non-standard
*/
@@ -284,14 +378,18 @@
dbg("%s - Baud rate is not supported, "
"using 9600 baud", __FUNCTION__);
cflag |= B9600;
- cp2101_set_config(port, CP2101_BAUDRATE,
+ cp2101_set_config_single(port, CP2101_BAUDRATE,
(BAUD_RATE_GEN_FREQ/9600));
break;
}
- bits = cp2101_get_config(port, CP2101_BITS);
+ cp2101_get_config(port, CP2101_BITS, &bits, 2);
cflag &= ~CSIZE;
switch(bits & BITS_DATA_MASK) {
+ case BITS_DATA_5:
+ dbg("%s - data bits = 5", __FUNCTION__);
+ cflag |= CS5;
+ break;
case BITS_DATA_6:
dbg("%s - data bits = 6", __FUNCTION__);
cflag |= CS6;
@@ -310,7 +408,7 @@
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
default:
dbg("%s - Unknown number of data bits, "
@@ -318,7 +416,7 @@
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
}
@@ -341,21 +439,21 @@
"disabling parity)", __FUNCTION__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
case BITS_PARITY_SPACE:
dbg("%s - parity = SPACE (not supported, "
"disabling parity)", __FUNCTION__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
default:
dbg("%s - Unknown parity mode, "
"disabling parity", __FUNCTION__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
}
@@ -366,9 +464,9 @@
break;
case BITS_STOP_1_5:
dbg("%s - stop bits = 1.5 (not supported, "
- "using 1 stop bit", __FUNCTION__);
+ "using 1 stop bit)", __FUNCTION__);
bits &= ~BITS_STOP_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
case BITS_STOP_2:
dbg("%s - stop bits = 2", __FUNCTION__);
@@ -378,10 +476,19 @@
dbg("%s - Unknown number of stop bits, "
"using 1 stop bit", __FUNCTION__);
bits &= ~BITS_STOP_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
}
+ cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ if (modem_ctl[0] & 0x0008) {
+ dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+ cflag |= CRTSCTS;
+ } else {
+ dbg("%s - flow control = NONE", __FUNCTION__);
+ cflag &= ~CRTSCTS;
+ }
+
port->tty->termios->c_cflag = cflag;
}
@@ -389,8 +496,8 @@
struct termios *old_termios)
{
unsigned int cflag, old_cflag=0;
- int baud=0;
- int bits;
+ int baud=0, bits;
+ unsigned int modem_ctl[4];
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -400,7 +507,7 @@
}
cflag = port->tty->termios->c_cflag;
- /* check that they really want us to change something */
+ /* Check that they really want us to change something */
if (old_termios) {
if ((cflag == old_termios->c_cflag) &&
(RELEVANT_IFLAG(port->tty->termios->c_iflag)
@@ -415,7 +522,8 @@
/* If the baud rate is to be updated*/
if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
switch (cflag & CBAUD) {
- /* The baud rates which are commented out below
+ /*
+ * The baud rates which are commented out below
* appear to be supported by the device
* but are non-standard
*/
@@ -448,18 +556,22 @@
if (baud) {
dbg("%s - Setting baud rate to %d baud", __FUNCTION__,
baud);
- if (cp2101_set_config(port, CP2101_BAUDRATE,
+ if (cp2101_set_config_single(port, CP2101_BAUDRATE,
(BAUD_RATE_GEN_FREQ / baud)))
dev_err(&port->dev, "Baud rate requested not "
"supported by device\n");
}
}
- /*If the number of data bits is to be updated*/
+ /* If the number of data bits is to be updated */
if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
- bits = cp2101_get_config(port, CP2101_BITS);
+ cp2101_get_config(port, CP2101_BITS, &bits, 2);
bits &= ~BITS_DATA_MASK;
switch (cflag & CSIZE) {
+ case CS5:
+ bits |= BITS_DATA_5;
+ dbg("%s - data bits = 5", __FUNCTION__);
+ break;
case CS6:
bits |= BITS_DATA_6;
dbg("%s - data bits = 6", __FUNCTION__);
@@ -483,13 +595,13 @@
bits |= BITS_DATA_8;
break;
}
- if (cp2101_set_config(port, CP2101_BITS, bits))
+ if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
dev_err(&port->dev, "Number of data bits requested "
"not supported by device\n");
}
if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
- bits = cp2101_get_config(port, CP2101_BITS);
+ cp2101_get_config(port, CP2101_BITS, &bits, 2);
bits &= ~BITS_PARITY_MASK;
if (cflag & PARENB) {
if (cflag & PARODD) {
@@ -500,13 +612,13 @@
dbg("%s - parity = EVEN", __FUNCTION__);
}
}
- if (cp2101_set_config(port, CP2101_BITS, bits))
+ if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
dev_err(&port->dev, "Parity mode not supported "
"by device\n");
}
if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
- bits = cp2101_get_config(port, CP2101_BITS);
+ cp2101_get_config(port, CP2101_BITS, &bits, 2);
bits &= ~BITS_STOP_MASK;
if (cflag & CSTOPB) {
bits |= BITS_STOP_2;
@@ -515,15 +627,90 @@
bits |= BITS_STOP_1;
dbg("%s - stop bits = 1", __FUNCTION__);
}
- if (cp2101_set_config(port, CP2101_BITS, bits))
+ if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
dev_err(&port->dev, "Number of stop bits requested "
"not supported by device\n");
}
+
+ if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+ cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
+ __FUNCTION__, modem_ctl[0], modem_ctl[1],
+ modem_ctl[2], modem_ctl[3]);
+
+ if (cflag & CRTSCTS) {
+ modem_ctl[0] &= ~0x7B;
+ modem_ctl[0] |= 0x09;
+ modem_ctl[1] = 0x80;
+ dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+ } else {
+ modem_ctl[0] &= ~0x7B;
+ modem_ctl[0] |= 0x01;
+ modem_ctl[1] |= 0x40;
+ dbg("%s - flow control = NONE", __FUNCTION__);
+ }
+
+ dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
+ __FUNCTION__, modem_ctl[0], modem_ctl[1],
+ modem_ctl[2], modem_ctl[3]);
+ cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ }
+
+}
+
+static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ int control = 0;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (set & TIOCM_RTS) {
+ control |= CONTROL_RTS;
+ control |= CONTROL_WRITE_RTS;
+ }
+ if (set & TIOCM_DTR) {
+ control |= CONTROL_DTR;
+ control |= CONTROL_WRITE_DTR;
+ }
+ if (clear & TIOCM_RTS) {
+ control &= ~CONTROL_RTS;
+ control |= CONTROL_WRITE_RTS;
+ }
+ if (clear & TIOCM_DTR) {
+ control &= ~CONTROL_DTR;
+ control |= CONTROL_WRITE_DTR;
+ }
+
+ dbg("%s - control = 0x%.4x", __FUNCTION__, control);
+
+ return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
+
+}
+
+static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file)
+{
+ int control, result;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ cp2101_get_config(port, CP2101_CONTROL, &control, 1);
+
+ result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
+ |((control & CONTROL_RTS) ? TIOCM_RTS : 0)
+ |((control & CONTROL_CTS) ? TIOCM_CTS : 0)
+ |((control & CONTROL_DSR) ? TIOCM_DSR : 0)
+ |((control & CONTROL_RING)? TIOCM_RI : 0)
+ |((control & CONTROL_DCD) ? TIOCM_CD : 0);
+
+ dbg("%s - control = 0x%.2x", __FUNCTION__, control);
+
+ return result;
}
static void cp2101_break_ctl (struct usb_serial_port *port, int break_state)
{
- u16 state;
+ int state;
dbg("%s - port %d", __FUNCTION__, port->number);
if (break_state == 0)
@@ -532,12 +719,12 @@
state = BREAK_ON;
dbg("%s - turning break %s", __FUNCTION__,
state==BREAK_OFF ? "off" : "on");
- cp2101_set_config(port, CP2101_BREAK, state);
+ cp2101_set_config(port, CP2101_BREAK, &state, 2);
}
static int cp2101_startup (struct usb_serial *serial)
{
- /*CP2101 buffers behave strangely unless device is reset*/
+ /* CP2101 buffers behave strangely unless device is reset */
usb_reset_device(serial->dev);
return 0;
}
@@ -548,7 +735,7 @@
dbg("%s", __FUNCTION__);
- /* stop reads and writes on all ports */
+ /* Stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {
cp2101_cleanup(serial->port[i]);
}
@@ -560,16 +747,16 @@
retval = usb_serial_register(&cp2101_device);
if (retval)
- return retval; /*Failed to register*/
+ return retval; /* Failed to register */
retval = usb_register(&cp2101_driver);
if (retval) {
- /*Failed to register*/
+ /* Failed to register */
usb_serial_deregister(&cp2101_device);
return retval;
}
- /*Success*/
+ /* Success */
info(DRIVER_DESC " " DRIVER_VERSION);
return 0;
}
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index f34a9bb..012e63e 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -89,6 +89,7 @@
static struct usb_device_id id_table_earthmate [] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
+ { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ } /* Terminating entry */
};
@@ -99,6 +100,7 @@
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
+ { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 1012ee6..1fa119e 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -13,6 +13,7 @@
/* DeLorme Earthmate USB - a GPS device */
#define VENDOR_ID_DELORME 0x1163
#define PRODUCT_ID_EARTHMATEUSB 0x0100
+#define PRODUCT_ID_EARTHMATEUSB_LT20 0x0200
/* Cypress HID->COM RS232 Adapter */
#define VENDOR_ID_CYPRESS 0x04b4
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 52394f0..051c3a7 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -364,6 +364,7 @@
{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0, 0x3ff) },
+ { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0, 0x3ff) },
{ USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0, 0x3ff) },
@@ -475,6 +476,7 @@
{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0x400, 0xffff) },
+ { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
@@ -618,6 +620,7 @@
{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
{ USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index a52bb13..8866376 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -144,6 +144,8 @@
/* ELV USB Module UO100 (PID sent by Stefan Frings) */
#define FTDI_ELV_UO100_PID 0xFB58 /* Product Id */
+/* ELV USB Module UM100 (PID sent by Arnim Laeuger) */
+#define FTDI_ELV_UM100_PID 0xFB5A /* Product Id */
/*
* Definitions for ID TECH (www.idt-net.com) devices
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
new file mode 100644
index 0000000..b722175
--- /dev/null
+++ b/drivers/usb/serial/option.c
@@ -0,0 +1,729 @@
+/*
+ Option Card (PCMCIA to) USB to Serial Driver
+
+ Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de>
+
+ This driver is free software; you can redistribute it and/or modify
+ it under the terms of Version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
+
+ History:
+
+ 2005-05-19 v0.1 Initial version, based on incomplete docs
+ and analysis of misbehavior of the standard driver
+ 2005-05-20 v0.2 Extended the input buffer to avoid losing
+ random 64-byte chunks of data
+ 2005-05-21 v0.3 implemented chars_in_buffer()
+ turned on low_latency
+ simplified the code somewhat
+*/
+#define DRIVER_VERSION "v0.3"
+#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
+#define DRIVER_DESC "Option Card (PC-Card to) USB to Serial Driver"
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+/* Function prototypes */
+static int option_open (struct usb_serial_port *port, struct file *filp);
+static void option_close (struct usb_serial_port *port, struct file *filp);
+static int option_startup (struct usb_serial *serial);
+static void option_shutdown (struct usb_serial *serial);
+static void option_rx_throttle (struct usb_serial_port *port);
+static void option_rx_unthrottle (struct usb_serial_port *port);
+static int option_write_room (struct usb_serial_port *port);
+
+static void option_instat_callback(struct urb *urb, struct pt_regs *regs);
+
+
+static int option_write (struct usb_serial_port *port,
+ const unsigned char *buf, int count);
+
+static int option_chars_in_buffer (struct usb_serial_port *port);
+static int option_ioctl (struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static void option_set_termios (struct usb_serial_port *port,
+ struct termios *old);
+static void option_break_ctl (struct usb_serial_port *port, int break_state);
+static int option_tiocmget (struct usb_serial_port *port, struct file *file);
+static int option_tiocmset (struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear);
+static int option_send_setup (struct usb_serial_port *port);
+
+/* Vendor and product IDs */
+#define OPTION_VENDOR_ID 0x0AF0
+
+#define OPTION_PRODUCT_OLD 0x5000
+#define OPTION_PRODUCT_WLAN 0x6000
+
+static struct usb_device_id option_ids[] = {
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_WLAN) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, option_ids);
+
+static struct usb_driver option_driver = {
+ .owner = THIS_MODULE,
+ .name = "option",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = option_ids,
+};
+
+/* The card has three separate interfaces, wich the serial driver
+ * recognizes separately, thus num_port=1.
+ */
+static struct usb_serial_device_type option_3port_device = {
+ .owner = THIS_MODULE,
+ .name = "Option 3-port card",
+ .short_name = "option",
+ .id_table = option_ids,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
+ .num_ports = 1, /* 3 */
+ .open = option_open,
+ .close = option_close,
+ .write = option_write,
+ .write_room = option_write_room,
+ .chars_in_buffer = option_chars_in_buffer,
+ .throttle = option_rx_throttle,
+ .unthrottle = option_rx_unthrottle,
+ .ioctl = option_ioctl,
+ .set_termios = option_set_termios,
+ .break_ctl = option_break_ctl,
+ .tiocmget = option_tiocmget,
+ .tiocmset = option_tiocmset,
+ .attach = option_startup,
+ .shutdown = option_shutdown,
+ .read_int_callback = option_instat_callback,
+};
+
+static int debug;
+
+/* per port private data */
+
+#define N_IN_URB 4
+#define N_OUT_URB 1
+#define IN_BUFLEN 1024
+#define OUT_BUFLEN 1024
+
+struct option_port_private {
+ /* Input endpoints and buffer for this port */
+ struct urb *in_urbs[N_IN_URB];
+ char in_buffer[N_IN_URB][IN_BUFLEN];
+ /* Output endpoints and buffer for this port */
+ struct urb *out_urbs[N_OUT_URB];
+ char out_buffer[N_OUT_URB][OUT_BUFLEN];
+
+ /* Settings for the port */
+ int rts_state; /* Handshaking pins (outputs) */
+ int dtr_state;
+ int cts_state; /* Handshaking pins (inputs) */
+ int dsr_state;
+ int dcd_state;
+ int ri_state;
+ // int break_on;
+
+ unsigned long tx_start_time[N_OUT_URB];
+};
+
+
+/* Functions used by new usb-serial code. */
+static int __init
+option_init (void)
+{
+ int retval;
+ retval = usb_serial_register(&option_3port_device);
+ if (retval)
+ goto failed_3port_device_register;
+ retval = usb_register(&option_driver);
+ if (retval)
+ goto failed_driver_register;
+
+ info(DRIVER_DESC ": " DRIVER_VERSION);
+
+ return 0;
+
+failed_driver_register:
+ usb_serial_deregister (&option_3port_device);
+failed_3port_device_register:
+ return retval;
+}
+
+static void __exit
+option_exit (void)
+{
+ usb_deregister (&option_driver);
+ usb_serial_deregister (&option_3port_device);
+}
+
+module_init(option_init);
+module_exit(option_exit);
+
+static void
+option_rx_throttle (struct usb_serial_port *port)
+{
+ dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_rx_unthrottle (struct usb_serial_port *port)
+{
+ dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_break_ctl (struct usb_serial_port *port, int break_state)
+{
+ /* Unfortunately, I don't know how to send a break */
+ dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_set_termios (struct usb_serial_port *port,
+ struct termios *old_termios)
+{
+ dbg("%s", __FUNCTION__);
+
+ option_send_setup(port);
+}
+
+static int
+option_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+ unsigned int value;
+ struct option_port_private *portdata;
+
+ portdata = usb_get_serial_port_data(port);
+
+ value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
+ ((portdata->dtr_state) ? TIOCM_DTR : 0) |
+ ((portdata->cts_state) ? TIOCM_CTS : 0) |
+ ((portdata->dsr_state) ? TIOCM_DSR : 0) |
+ ((portdata->dcd_state) ? TIOCM_CAR : 0) |
+ ((portdata->ri_state) ? TIOCM_RNG : 0);
+
+ return value;
+}
+
+static int
+option_tiocmset (struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct option_port_private *portdata;
+
+ portdata = usb_get_serial_port_data(port);
+
+ if (set & TIOCM_RTS)
+ portdata->rts_state = 1;
+ if (set & TIOCM_DTR)
+ portdata->dtr_state = 1;
+
+ if (clear & TIOCM_RTS)
+ portdata->rts_state = 0;
+ if (clear & TIOCM_DTR)
+ portdata->dtr_state = 0;
+ return option_send_setup(port);
+}
+
+static int
+option_ioctl (struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ return -ENOIOCTLCMD;
+}
+
+/* Write */
+static int
+option_write(struct usb_serial_port *port,
+ const unsigned char *buf, int count)
+{
+ struct option_port_private *portdata;
+ int i;
+ int left, todo;
+ struct urb *this_urb = NULL; /* spurious */
+ int err;
+
+ portdata = usb_get_serial_port_data(port);
+
+ dbg("%s: write (%d chars)", __FUNCTION__, count);
+
+#if 0
+ spin_lock(&port->lock);
+ if (port->write_urb_busy) {
+ spin_unlock(&port->lock);
+ dbg("%s: already writing", __FUNCTION__);
+ return 0;
+ }
+ port->write_urb_busy = 1;
+ spin_unlock(&port->lock);
+#endif
+
+ i = 0;
+ left = count;
+ while (left>0) {
+ todo = left;
+ if (todo > OUT_BUFLEN)
+ todo = OUT_BUFLEN;
+
+ for (;i < N_OUT_URB; i++) {
+ /* Check we have a valid urb/endpoint before we use it... */
+ this_urb = portdata->out_urbs[i];
+ if (this_urb->status != -EINPROGRESS)
+ break;
+ if (this_urb->transfer_flags & URB_ASYNC_UNLINK)
+ continue;
+ if (time_before(jiffies, portdata->tx_start_time[i] + 10 * HZ))
+ continue;
+ this_urb->transfer_flags |= URB_ASYNC_UNLINK;
+ usb_unlink_urb(this_urb);
+ }
+
+ if (i == N_OUT_URB) {
+ /* no bulk out free! */
+ dbg("%s: no output urb -- left %d", __FUNCTION__,count-left);
+#if 0
+ port->write_urb_busy = 0;
+#endif
+ return count-left;
+ }
+
+ dbg("%s: endpoint %d buf %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), i);
+
+ memcpy (this_urb->transfer_buffer, buf, todo);
+
+ /* send the data out the bulk port */
+ this_urb->transfer_buffer_length = todo;
+
+ this_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ this_urb->dev = port->serial->dev;
+ err = usb_submit_urb(this_urb, GFP_ATOMIC);
+ if (err) {
+ dbg("usb_submit_urb %p (write bulk) failed (%d,, has %d)", this_urb, err, this_urb->status);
+ continue;
+ }
+ portdata->tx_start_time[i] = jiffies;
+ buf += todo;
+ left -= todo;
+ }
+
+ count -= left;
+#if 0
+ port->write_urb_busy = 0;
+#endif
+ dbg("%s: wrote (did %d)", __FUNCTION__, count);
+ return count;
+}
+
+static void
+option_indat_callback (struct urb *urb, struct pt_regs *regs)
+{
+ int i, err;
+ int endpoint;
+ struct usb_serial_port *port;
+ struct tty_struct *tty;
+ unsigned char *data = urb->transfer_buffer;
+
+ dbg("%s: %p", __FUNCTION__, urb);
+
+ endpoint = usb_pipeendpoint(urb->pipe);
+ port = (struct usb_serial_port *) urb->context;
+
+ if (urb->status) {
+ dbg("%s: nonzero status: %d on endpoint %02x.",
+ __FUNCTION__, urb->status, endpoint);
+ } else {
+ tty = port->tty;
+ if (urb->actual_length) {
+ for (i = 0; i < urb->actual_length ; ++i) {
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ tty_flip_buffer_push(tty);
+ tty_insert_flip_char(tty, data[i], 0);
+ }
+ tty_flip_buffer_push(tty);
+ } else {
+ dbg("%s: empty read urb received", __FUNCTION__);
+ }
+
+ /* Resubmit urb so we continue receiving */
+ if (port->open_count && urb->status != -ESHUTDOWN) {
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err)
+ printk(KERN_ERR "%s: resubmit read urb failed. (%d)", __FUNCTION__, err);
+ }
+ }
+ return;
+}
+
+static void
+option_outdat_callback (struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_serial_port *port;
+
+ dbg("%s", __FUNCTION__);
+
+ port = (struct usb_serial_port *) urb->context;
+
+ if (port->open_count)
+ schedule_work(&port->work);
+}
+
+static void
+option_instat_callback (struct urb *urb, struct pt_regs *regs)
+{
+ int err;
+ struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+ struct option_port_private *portdata = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+
+ dbg("%s", __FUNCTION__);
+ dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata);
+
+ if (urb->status == 0) {
+ struct usb_ctrlrequest *req_pkt =
+ (struct usb_ctrlrequest *)urb->transfer_buffer;
+
+ if (!req_pkt) {
+ dbg("%s: NULL req_pkt\n", __FUNCTION__);
+ return;
+ }
+ if ((req_pkt->bRequestType == 0xA1) && (req_pkt->bRequest == 0x20)) {
+ int old_dcd_state;
+ unsigned char signals = *((unsigned char *)
+ urb->transfer_buffer + sizeof(struct usb_ctrlrequest));
+
+ dbg("%s: signal x%x", __FUNCTION__, signals);
+
+ old_dcd_state = portdata->dcd_state;
+ portdata->cts_state = 1;
+ portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
+ portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
+ portdata->ri_state = ((signals & 0x08) ? 1 : 0);
+
+ if (port->tty && !C_CLOCAL(port->tty)
+ && old_dcd_state && !portdata->dcd_state) {
+ tty_hangup(port->tty);
+ }
+ } else
+ dbg("%s: type %x req %x", __FUNCTION__, req_pkt->bRequestType,req_pkt->bRequest);
+ } else
+ dbg("%s: error %d", __FUNCTION__, urb->status);
+
+ /* Resubmit urb so we continue receiving IRQ data */
+ if (urb->status != -ESHUTDOWN) {
+ urb->dev = serial->dev;
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err)
+ dbg("%s: resubmit intr urb failed. (%d)", __FUNCTION__, err);
+ }
+}
+
+
+static int
+option_write_room (struct usb_serial_port *port)
+{
+ struct option_port_private *portdata;
+ int i;
+ int data_len = 0;
+ struct urb *this_urb;
+
+ portdata = usb_get_serial_port_data(port);
+
+ for (i=0; i < N_OUT_URB; i++)
+ this_urb = portdata->out_urbs[i];
+ if (this_urb && this_urb->status != -EINPROGRESS)
+ data_len += OUT_BUFLEN;
+
+ dbg("%s: %d", __FUNCTION__, data_len);
+ return data_len;
+}
+
+
+static int
+option_chars_in_buffer (struct usb_serial_port *port)
+{
+ struct option_port_private *portdata;
+ int i;
+ int data_len = 0;
+ struct urb *this_urb;
+
+ portdata = usb_get_serial_port_data(port);
+
+ for (i=0; i < N_OUT_URB; i++)
+ this_urb = portdata->out_urbs[i];
+ if (this_urb && this_urb->status == -EINPROGRESS)
+ data_len += this_urb->transfer_buffer_length;
+
+ dbg("%s: %d", __FUNCTION__, data_len);
+ return data_len;
+}
+
+
+static int
+option_open (struct usb_serial_port *port, struct file *filp)
+{
+ struct option_port_private *portdata;
+ struct usb_serial *serial = port->serial;
+ int i, err;
+ struct urb *urb;
+
+ portdata = usb_get_serial_port_data(port);
+
+ dbg("%s", __FUNCTION__);
+
+ /* Set some sane defaults */
+ portdata->rts_state = 1;
+ portdata->dtr_state = 1;
+
+ /* Reset low level data toggle and start reading from endpoints */
+ for (i = 0; i < N_IN_URB; i++) {
+ urb = portdata->in_urbs[i];
+ if (! urb)
+ continue;
+ if (urb->dev != serial->dev) {
+ dbg("%s: dev %p != %p", __FUNCTION__, urb->dev, serial->dev);
+ continue;
+ }
+
+ /* make sure endpoint data toggle is synchronized with the device */
+
+ usb_clear_halt(urb->dev, urb->pipe);
+
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err) {
+ dbg("%s: submit urb %d failed (%d) %d", __FUNCTION__, i, err,
+ urb->transfer_buffer_length);
+ }
+ }
+
+ /* Reset low level data toggle on out endpoints */
+ for (i = 0; i < N_OUT_URB; i++) {
+ urb = portdata->out_urbs[i];
+ if (! urb)
+ continue;
+ urb->dev = serial->dev;
+ /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */
+ }
+
+ port->tty->low_latency = 1;
+
+ option_send_setup(port);
+
+ return (0);
+}
+
+static inline void
+stop_urb(struct urb *urb)
+{
+ if (urb && urb->status == -EINPROGRESS) {
+ urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ usb_kill_urb(urb);
+ }
+}
+
+static void
+option_close(struct usb_serial_port *port, struct file *filp)
+{
+ int i;
+ struct usb_serial *serial = port->serial;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+ portdata = usb_get_serial_port_data(port);
+
+ portdata->rts_state = 0;
+ portdata->dtr_state = 0;
+
+ if (serial->dev) {
+ option_send_setup(port);
+
+ /* Stop reading/writing urbs */
+ for (i = 0; i < N_IN_URB; i++)
+ stop_urb(portdata->in_urbs[i]);
+ for (i = 0; i < N_OUT_URB; i++)
+ stop_urb(portdata->out_urbs[i]);
+ }
+ port->tty = NULL;
+}
+
+
+/* Helper functions used by option_setup_urbs */
+static struct urb *
+option_setup_urb (struct usb_serial *serial, int endpoint,
+ int dir, void *ctx, char *buf, int len,
+ void (*callback)(struct urb *, struct pt_regs *regs))
+{
+ struct urb *urb;
+
+ if (endpoint == -1)
+ return NULL; /* endpoint not needed */
+
+ urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
+ if (urb == NULL) {
+ dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint);
+ return NULL;
+ }
+
+ /* Fill URB using supplied data. */
+ usb_fill_bulk_urb(urb, serial->dev,
+ usb_sndbulkpipe(serial->dev, endpoint) | dir,
+ buf, len, callback, ctx);
+
+ return urb;
+}
+
+/* Setup urbs */
+static void
+option_setup_urbs(struct usb_serial *serial)
+{
+ int j;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+
+ port = serial->port[0];
+ portdata = usb_get_serial_port_data(port);
+
+ /* Do indat endpoints first */
+ for (j = 0; j <= N_IN_URB; ++j) {
+ portdata->in_urbs[j] = option_setup_urb (serial,
+ port->bulk_in_endpointAddress, USB_DIR_IN, port,
+ portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
+ }
+
+ /* outdat endpoints */
+ for (j = 0; j <= N_OUT_URB; ++j) {
+ portdata->out_urbs[j] = option_setup_urb (serial,
+ port->bulk_out_endpointAddress, USB_DIR_OUT, port,
+ portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
+ }
+}
+
+
+static int
+option_send_setup(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+
+ portdata = usb_get_serial_port_data(port);
+
+ if (port->tty) {
+ int val = 0;
+ if (portdata->dtr_state)
+ val |= 0x01;
+ if (portdata->rts_state)
+ val |= 0x02;
+
+ return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
+ }
+
+ return 0;
+}
+
+
+static int
+option_startup (struct usb_serial *serial)
+{
+ int i, err;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+
+ /* Now setup per port private data */
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ portdata = kmalloc(sizeof(struct option_port_private), GFP_KERNEL);
+ if (!portdata) {
+ dbg("%s: kmalloc for option_port_private (%d) failed!.", __FUNCTION__, i);
+ return (1);
+ }
+ memset(portdata, 0, sizeof(struct option_port_private));
+
+ usb_set_serial_port_data(port, portdata);
+
+ if (! port->interrupt_in_urb)
+ continue;
+ err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+ if (err)
+ dbg("%s: submit irq_in urb failed %d", __FUNCTION__, err);
+ }
+
+ option_setup_urbs(serial);
+
+ return (0);
+}
+
+static void
+option_shutdown (struct usb_serial *serial)
+{
+ int i, j;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+
+ /* Stop reading/writing urbs */
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ portdata = usb_get_serial_port_data(port);
+ for (j = 0; j < N_IN_URB; j++)
+ stop_urb(portdata->in_urbs[j]);
+ for (j = 0; j < N_OUT_URB; j++)
+ stop_urb(portdata->out_urbs[j]);
+ }
+
+ /* Now free them */
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ portdata = usb_get_serial_port_data(port);
+
+ for (j = 0; j < N_IN_URB; j++) {
+ if (portdata->in_urbs[j]) {
+ usb_free_urb(portdata->in_urbs[j]);
+ portdata->in_urbs[j] = NULL;
+ }
+ }
+ for (j = 0; j < N_OUT_URB; j++) {
+ if (portdata->out_urbs[j]) {
+ usb_free_urb(portdata->out_urbs[j]);
+ portdata->out_urbs[j] = NULL;
+ }
+ }
+ }
+
+ /* Now free per port private data */
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ kfree(usb_get_serial_port_data(port));
+ }
+}
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages");
+
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4536f63..5da76dd 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1297,13 +1297,6 @@
goto exit_bus;
}
- /* register the generic driver, if we should */
- result = usb_serial_generic_register(debug);
- if (result < 0) {
- err("%s - registering generic driver failed", __FUNCTION__);
- goto exit_generic;
- }
-
usb_serial_tty_driver->owner = THIS_MODULE;
usb_serial_tty_driver->driver_name = "usbserial";
usb_serial_tty_driver->devfs_name = "usb/tts/";
@@ -1329,17 +1322,24 @@
goto exit_tty;
}
+ /* register the generic driver, if we should */
+ result = usb_serial_generic_register(debug);
+ if (result < 0) {
+ err("%s - registering generic driver failed", __FUNCTION__);
+ goto exit_generic;
+ }
+
info(DRIVER_DESC " " DRIVER_VERSION);
return result;
+exit_generic:
+ usb_deregister(&usb_serial_driver);
+
exit_tty:
tty_unregister_driver(usb_serial_tty_driver);
exit_reg_driver:
- usb_serial_generic_deregister();
-
-exit_generic:
bus_unregister(&usb_serial_bus_type);
exit_bus:
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index d2891f4..9fcc7bd 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -862,6 +862,15 @@
US_SC_DEVICE, US_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
+/* Reported by Filippo Bardelli <filibard@libero.it>
+ * The device reports a subclass of RBC, which is wrong.
+ */
+UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100,
+ "Trumpion Microelectronics, Inc.",
+ "33520 USB Digital Voice Recorder",
+ US_SC_UFI, US_PR_DEVICE, NULL,
+ 0),
+
/* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
"Trumpion",
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c
index 549e229..25f9a9a 100644
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/intelfb/intelfbdrv.c
@@ -228,17 +228,17 @@
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DEVICE_TABLE(pci, intelfb_pci_table);
-static int accel __initdata = 1;
-static int vram __initdata = 4;
-static int hwcursor __initdata = 1;
-static int mtrr __initdata = 1;
-static int fixed __initdata = 0;
-static int noinit __initdata = 0;
-static int noregister __initdata = 0;
-static int probeonly __initdata = 0;
-static int idonly __initdata = 0;
-static int bailearly __initdata = 0;
-static char *mode __initdata = NULL;
+static int accel = 1;
+static int vram = 4;
+static int hwcursor = 1;
+static int mtrr = 1;
+static int fixed = 0;
+static int noinit = 0;
+static int noregister = 0;
+static int probeonly = 0;
+static int idonly = 0;
+static int bailearly = 0;
+static char *mode = NULL;
module_param(accel, bool, S_IRUGO);
MODULE_PARM_DESC(accel, "Enable console acceleration");
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index ce9423b..c374be5 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -251,7 +251,7 @@
}
/* Populate argv and envp */
- p = current->mm->arg_start;
+ p = current->mm->arg_end = current->mm->arg_start;
while (argc-- > 0) {
size_t len;
__put_user((elf_addr_t)p, argv++);
@@ -1301,7 +1301,7 @@
static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p,
struct mm_struct *mm)
{
- int i, len;
+ unsigned int i, len;
/* first copy the parameters from user space */
memset(psinfo, 0, sizeof(struct elf_prpsinfo));
diff --git a/fs/buffer.c b/fs/buffer.c
index 6f88dcc..7e9e409 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2094,9 +2094,12 @@
continue;
if (!buffer_mapped(bh)) {
+ int err = 0;
+
fully_mapped = 0;
if (iblock < lblock) {
- if (get_block(inode, iblock, bh, 0))
+ err = get_block(inode, iblock, bh, 0);
+ if (err)
SetPageError(page);
}
if (!buffer_mapped(bh)) {
@@ -2104,7 +2107,8 @@
memset(kaddr + i * blocksize, 0, blocksize);
flush_dcache_page(page);
kunmap_atomic(kaddr, KM_USER0);
- set_buffer_uptodate(bh);
+ if (!err)
+ set_buffer_uptodate(bh);
continue;
}
/*
diff --git a/fs/cifs/README b/fs/cifs/README
index e74df0c..34b0cf7 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -371,7 +371,7 @@
on newly created files, directories, and devices (create,
mkdir, mknod) which will result in the server setting the
uid and gid to the default (usually the server uid of the
- usern who mounted the share). Letting the server (rather than
+ user who mounted the share). Letting the server (rather than
the client) set the uid and gid is the default. This
parameter has no effect if the CIFS Unix Extensions are not
negotiated.
@@ -384,7 +384,7 @@
client (e.g. when the application is doing large sequential
reads bigger than page size without rereading the same data)
this can provide better performance than the default
- behavior which caches reads (reaadahead) and writes
+ behavior which caches reads (readahead) and writes
(writebehind) through the local Linux client pagecache
if oplock (caching token) is granted and held. Note that
direct allows write operations larger than page size
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 0010511..ea239de 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -228,7 +228,7 @@
const struct nls_table *nls_codepage,
int remap_special_chars);
#endif /* CONFIG_CIFS_EXPERIMENTAL */
-extern int cifs_convertUCSpath(char *target, const __u16 *source, int maxlen,
+extern int cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
const struct nls_table * codepage);
extern int cifsConvertToUCS(__le16 * target, const char *source, int maxlen,
const struct nls_table * cp, int mapChars);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 741ff0c..3c628bf 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -567,7 +567,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->fileName, fileName,
+ cifsConvertToUCS((__le16 *) pSMB->fileName, fileName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -665,7 +665,7 @@
return rc;
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = cifsConvertToUCS((__u16 *) pSMB->DirName, name,
+ name_len = cifsConvertToUCS((__le16 *) pSMB->DirName, name,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -719,7 +719,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
count = 1; /* account for one byte pad to word boundary */
name_len =
- cifsConvertToUCS((__u16 *) (pSMB->fileName + 1),
+ cifsConvertToUCS((__le16 *) (pSMB->fileName + 1),
fileName, PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -1141,7 +1141,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->OldFileName, fromName,
+ cifsConvertToUCS((__le16 *) pSMB->OldFileName, fromName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -1149,7 +1149,7 @@
/* protocol requires ASCII signature byte on Unicode string */
pSMB->OldFileName[name_len + 1] = 0x00;
name_len2 =
- cifsConvertToUCS((__u16 *) &pSMB->OldFileName[name_len + 2],
+ cifsConvertToUCS((__le16 *) &pSMB->OldFileName[name_len + 2],
toName, PATH_MAX, nls_codepage, remap);
name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ;
name_len2 *= 2; /* convert to bytes */
@@ -1236,10 +1236,10 @@
/* unicode only call */
if(target_name == NULL) {
sprintf(dummy_string,"cifs%x",pSMB->hdr.Mid);
- len_of_str = cifsConvertToUCS((__u16 *)rename_info->target_name,
+ len_of_str = cifsConvertToUCS((__le16 *)rename_info->target_name,
dummy_string, 24, nls_codepage, remap);
} else {
- len_of_str = cifsConvertToUCS((__u16 *)rename_info->target_name,
+ len_of_str = cifsConvertToUCS((__le16 *)rename_info->target_name,
target_name, PATH_MAX, nls_codepage, remap);
}
rename_info->target_name_len = cpu_to_le32(2 * len_of_str);
@@ -1296,7 +1296,7 @@
pSMB->Flags = cpu_to_le16(flags & COPY_TREE);
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = cifsConvertToUCS((__u16 *) pSMB->OldFileName,
+ name_len = cifsConvertToUCS((__le16 *) pSMB->OldFileName,
fromName, PATH_MAX, nls_codepage,
remap);
name_len++; /* trailing null */
@@ -1304,7 +1304,7 @@
pSMB->OldFileName[name_len] = 0x04; /* pad */
/* protocol requires ASCII signature byte on Unicode string */
pSMB->OldFileName[name_len + 1] = 0x00;
- name_len2 = cifsConvertToUCS((__u16 *)&pSMB->OldFileName[name_len + 2],
+ name_len2 = cifsConvertToUCS((__le16 *)&pSMB->OldFileName[name_len + 2],
toName, PATH_MAX, nls_codepage, remap);
name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ;
name_len2 *= 2; /* convert to bytes */
@@ -1453,7 +1453,7 @@
return rc;
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = cifsConvertToUCS((__u16 *) pSMB->FileName, toName,
+ name_len = cifsConvertToUCS((__le16 *) pSMB->FileName, toName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -1476,7 +1476,7 @@
data_offset = (char *) (&pSMB->hdr.Protocol) + offset;
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len_target =
- cifsConvertToUCS((__u16 *) data_offset, fromName, PATH_MAX,
+ cifsConvertToUCS((__le16 *) data_offset, fromName, PATH_MAX,
nls_codepage, remap);
name_len_target++; /* trailing null */
name_len_target *= 2;
@@ -1546,14 +1546,14 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->OldFileName, fromName,
+ cifsConvertToUCS((__le16 *) pSMB->OldFileName, fromName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
pSMB->OldFileName[name_len] = 0; /* pad */
pSMB->OldFileName[name_len + 1] = 0x04;
name_len2 =
- cifsConvertToUCS((__u16 *)&pSMB->OldFileName[name_len + 2],
+ cifsConvertToUCS((__le16 *)&pSMB->OldFileName[name_len + 2],
toName, PATH_MAX, nls_codepage, remap);
name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ;
name_len2 *= 2; /* convert to bytes */
@@ -1939,7 +1939,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->FileName, searchName,
+ cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -2024,7 +2024,7 @@
return rc;
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->FileName, fileName,
+ cifsConvertToUCS((__le16 *) pSMB->FileName, fileName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -2188,7 +2188,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->FileName, searchName,
+ cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -2269,7 +2269,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->FileName, searchName,
+ cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -2350,7 +2350,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((wchar_t *) pSMB->FileName, searchName, PATH_MAX
+ cifsConvertToUCS((__le16 *) pSMB->FileName, searchName, PATH_MAX
/* find define for this maxpathcomponent */
, nls_codepage);
name_len++; /* trailing null */
@@ -2435,7 +2435,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->FileName,searchName,
+ cifsConvertToUCS((__le16 *) pSMB->FileName,searchName,
PATH_MAX, nls_codepage, remap);
/* We can not add the asterik earlier in case
it got remapped to 0xF03A as if it were part of the
@@ -2726,7 +2726,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->FileName, searchName,
+ cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
PATH_MAX,nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -2837,7 +2837,7 @@
if (ses->capabilities & CAP_UNICODE) {
pSMB->hdr.Flags2 |= SMBFLG2_UNICODE;
name_len =
- cifsConvertToUCS((__u16 *) pSMB->RequestFileName,
+ cifsConvertToUCS((__le16 *) pSMB->RequestFileName,
searchName, PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -3369,7 +3369,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->FileName, fileName,
+ cifsConvertToUCS((__le16 *) pSMB->FileName, fileName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -3627,7 +3627,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->FileName, fileName,
+ cifsConvertToUCS((__le16 *) pSMB->FileName, fileName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -3708,7 +3708,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- ConvertToUCS((wchar_t *) pSMB->fileName, fileName,
+ ConvertToUCS((__le16 *) pSMB->fileName, fileName,
PATH_MAX, nls_codepage);
name_len++; /* trailing null */
name_len *= 2;
@@ -3759,7 +3759,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->FileName, fileName,
+ cifsConvertToUCS((__le16 *) pSMB->FileName, fileName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -3904,7 +3904,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((wchar_t *) pSMB->FileName, searchName,
+ cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -4047,7 +4047,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->FileName, searchName,
+ cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
@@ -4194,7 +4194,7 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUCS((__u16 *) pSMB->FileName, fileName,
+ cifsConvertToUCS((__le16 *) pSMB->FileName, fileName,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index e3137aa..3f3538d 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -392,7 +392,8 @@
rc = 0;
d_add(direntry, NULL);
} else {
- cERROR(1,("Error 0x%x or on cifs_get_inode_info in lookup",rc));
+ cERROR(1,("Error 0x%x on cifs_get_inode_info in lookup of %s",
+ rc,full_path));
/* BB special case check for Access Denied - watch security
exposure of returning dir info implicitly via different rc
if file exists or not but no access BB */
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 6709472..b8b78cb 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -422,7 +422,8 @@
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
if (!rc) {
- direntry->d_inode->i_nlink--;
+ if(direntry->d_inode)
+ direntry->d_inode->i_nlink--;
} else if (rc == -ENOENT) {
d_drop(direntry);
} else if (rc == -ETXTBSY) {
@@ -440,7 +441,8 @@
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
CIFSSMBClose(xid, pTcon, netfid);
- direntry->d_inode->i_nlink--;
+ if(direntry->d_inode)
+ direntry->d_inode->i_nlink--;
}
} else if (rc == -EACCES) {
/* try only if r/o attribute set in local lookup data? */
@@ -494,7 +496,8 @@
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (!rc) {
- direntry->d_inode->i_nlink--;
+ if(direntry->d_inode)
+ direntry->d_inode->i_nlink--;
} else if (rc == -ETXTBSY) {
int oplock = FALSE;
__u16 netfid;
@@ -514,17 +517,20 @@
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
CIFSSMBClose(xid, pTcon, netfid);
- direntry->d_inode->i_nlink--;
+ if(direntry->d_inode)
+ direntry->d_inode->i_nlink--;
}
/* BB if rc = -ETXTBUSY goto the rename logic BB */
}
}
}
- cifsInode = CIFS_I(direntry->d_inode);
- cifsInode->time = 0; /* will force revalidate to get info when
- needed */
- direntry->d_inode->i_ctime = inode->i_ctime = inode->i_mtime =
- current_fs_time(inode->i_sb);
+ if(direntry->d_inode) {
+ cifsInode = CIFS_I(direntry->d_inode);
+ cifsInode->time = 0; /* will force revalidate to get info
+ when needed */
+ direntry->d_inode->i_ctime = current_fs_time(inode->i_sb);
+ }
+ inode->i_ctime = inode->i_mtime = current_fs_time(inode->i_sb);
cifsInode = CIFS_I(inode);
cifsInode->time = 0; /* force revalidate of dir as well */
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index db14b50..072b4ee 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -571,6 +571,7 @@
break;
case UNI_LESSTHAN:
target[j] = '<';
+ break;
default:
len = cp->uni2char(src_char, &target[j],
NLS_MAX_CHARSET_SIZE);
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 545b440..981ccb2 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -225,8 +225,16 @@
int errno)
{
char nbuf[16];
- const char *errstr = ext3_decode_error(sb, errno, nbuf);
+ const char *errstr;
+ /* Special case: if the error is EROFS, and we're not already
+ * inside a transaction, then there's really no point in logging
+ * an error. */
+ if (errno == -EROFS && journal_current_handle() == NULL &&
+ (sb->s_flags & MS_RDONLY))
+ return;
+
+ errstr = ext3_decode_error(sb, errno, nbuf);
printk (KERN_CRIT "EXT3-fs error (device %s) in %s: %s\n",
sb->s_id, function, errstr);
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 14a0d33..4bf43ea 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -23,7 +23,6 @@
#include "kern_util.h"
#include "kern.h"
#include "user_util.h"
-#include "2_5compat.h"
#include "init.h"
struct hostfs_inode_info {
diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c
index 98d8304..5a97e34 100644
--- a/fs/jbd/checkpoint.c
+++ b/fs/jbd/checkpoint.c
@@ -188,7 +188,6 @@
} else {
jbd_unlock_bh_state(bh);
}
- jh = next_jh;
} while (jh != last_jh);
return ret;
@@ -339,8 +338,10 @@
}
} while (jh != last_jh && !retry);
- if (batch_count)
+ if (batch_count) {
__flush_batch(journal, bhs, &batch_count);
+ retry = 1;
+ }
/*
* If someone cleaned up this transaction while we slept, we're
diff --git a/fs/namei.c b/fs/namei.c
index defe678..dd78f01 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1580,6 +1580,7 @@
fail:
return dentry;
}
+EXPORT_SYMBOL_GPL(lookup_create);
int vfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
{
diff --git a/fs/proc/mmu.c b/fs/proc/mmu.c
index a704103..25d2d9c 100644
--- a/fs/proc/mmu.c
+++ b/fs/proc/mmu.c
@@ -50,13 +50,23 @@
read_lock(&vmlist_lock);
for (vma = vmlist; vma; vma = vma->next) {
+ unsigned long addr = (unsigned long) vma->addr;
+
+ /*
+ * Some archs keep another range for modules in vmlist
+ */
+ if (addr < VMALLOC_START)
+ continue;
+ if (addr >= VMALLOC_END)
+ break;
+
vmi->used += vma->size;
- free_area_size = (unsigned long) vma->addr - prev_end;
+ free_area_size = addr - prev_end;
if (vmi->largest_chunk < free_area_size)
vmi->largest_chunk = free_area_size;
- prev_end = vma->size + (unsigned long) vma->addr;
+ prev_end = vma->size + addr;
}
if (VMALLOC_END - prev_end > vmi->largest_chunk)
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index 67423c6..6fd57f1 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -12,15 +12,8 @@
#include <asm/uaccess.h>
#ifndef HAVE_ARCH_DEVTREE_FIXUPS
-static inline void set_node_proc_entry(struct device_node *np, struct proc_dir_entry *de)
-{
-}
-
-static void inline set_node_name_link(struct device_node *np, struct proc_dir_entry *de)
-{
-}
-
-static void inline set_node_addr_link(struct device_node *np, struct proc_dir_entry *de)
+static inline void set_node_proc_entry(struct device_node *np,
+ struct proc_dir_entry *de)
{
}
#endif
@@ -58,89 +51,67 @@
/*
* Process a node, adding entries for its children and its properties.
*/
-void proc_device_tree_add_node(struct device_node *np, struct proc_dir_entry *de)
+void proc_device_tree_add_node(struct device_node *np,
+ struct proc_dir_entry *de)
{
struct property *pp;
struct proc_dir_entry *ent;
- struct device_node *child, *sib;
- const char *p, *at;
- int l;
- struct proc_dir_entry *list, **lastp, *al;
+ struct device_node *child;
+ struct proc_dir_entry *list = NULL, **lastp;
+ const char *p;
set_node_proc_entry(np, de);
lastp = &list;
+ for (child = NULL; (child = of_get_next_child(np, child));) {
+ p = strrchr(child->full_name, '/');
+ if (!p)
+ p = child->full_name;
+ else
+ ++p;
+ ent = proc_mkdir(p, de);
+ if (ent == 0)
+ break;
+ *lastp = ent;
+ ent->next = NULL;
+ lastp = &ent->next;
+ proc_device_tree_add_node(child, ent);
+ }
+ of_node_put(child);
for (pp = np->properties; pp != 0; pp = pp->next) {
/*
+ * Yet another Apple device-tree bogosity: on some machines,
+ * they have properties & nodes with the same name. Those
+ * properties are quite unimportant for us though, thus we
+ * simply "skip" them here, but we do have to check.
+ */
+ for (ent = list; ent != NULL; ent = ent->next)
+ if (!strcmp(ent->name, pp->name))
+ break;
+ if (ent != NULL) {
+ printk(KERN_WARNING "device-tree: property \"%s\" name"
+ " conflicts with node in %s\n", pp->name,
+ np->full_name);
+ continue;
+ }
+
+ /*
* Unfortunately proc_register puts each new entry
* at the beginning of the list. So we rearrange them.
*/
- ent = create_proc_read_entry(pp->name, strncmp(pp->name, "security-", 9) ?
- S_IRUGO : S_IRUSR, de, property_read_proc, pp);
+ ent = create_proc_read_entry(pp->name,
+ strncmp(pp->name, "security-", 9)
+ ? S_IRUGO : S_IRUSR, de,
+ property_read_proc, pp);
if (ent == 0)
break;
if (!strncmp(pp->name, "security-", 9))
ent->size = 0; /* don't leak number of password chars */
else
ent->size = pp->length;
+ ent->next = NULL;
*lastp = ent;
lastp = &ent->next;
}
- child = NULL;
- while ((child = of_get_next_child(np, child))) {
- p = strrchr(child->full_name, '/');
- if (!p)
- p = child->full_name;
- else
- ++p;
- /* chop off '@0' if the name ends with that */
- l = strlen(p);
- if (l > 2 && p[l-2] == '@' && p[l-1] == '0')
- l -= 2;
- ent = proc_mkdir(p, de);
- if (ent == 0)
- break;
- *lastp = ent;
- lastp = &ent->next;
- proc_device_tree_add_node(child, ent);
-
- /*
- * If we left the address part on the name, consider
- * adding symlinks from the name and address parts.
- */
- if (p[l] != 0 || (at = strchr(p, '@')) == 0)
- continue;
-
- /*
- * If this is the first node with a given name property,
- * add a symlink with the name property as its name.
- */
- sib = NULL;
- while ((sib = of_get_next_child(np, sib)) && sib != child)
- if (sib->name && strcmp(sib->name, child->name) == 0)
- break;
- if (sib == child && strncmp(p, child->name, l) != 0) {
- al = proc_symlink(child->name, de, ent->name);
- if (al == 0) {
- of_node_put(sib);
- break;
- }
- set_node_name_link(child, al);
- *lastp = al;
- lastp = &al->next;
- }
- of_node_put(sib);
- /*
- * Add another directory with the @address part as its name.
- */
- al = proc_symlink(at, de, ent->name);
- if (al == 0)
- break;
- set_node_addr_link(child, al);
- *lastp = al;
- lastp = &al->next;
- }
- of_node_put(child);
- *lastp = NULL;
de->subdir = list;
}
diff --git a/fs/reiserfs/stree.c b/fs/reiserfs/stree.c
index da23ba7..c47f8fd 100644
--- a/fs/reiserfs/stree.c
+++ b/fs/reiserfs/stree.c
@@ -230,7 +230,6 @@
__constant_cpu_to_le32(0xffffffff)},}
};
-const struct in_core_key MAX_IN_CORE_KEY = {~0U, ~0U, ~0ULL>>4, 15};
/* Get delimiting key of the buffer by looking for it in the buffers in the path, starting from the bottom
of the path, and going upwards. We must check the path's validity at each step. If the key is not in
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 31e7512..b35b877 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -164,7 +164,9 @@
/* compose key to look for "save" links */
max_cpu_key.version = KEY_FORMAT_3_5;
- max_cpu_key.on_disk_key = MAX_IN_CORE_KEY;
+ max_cpu_key.on_disk_key.k_dir_id = ~0U;
+ max_cpu_key.on_disk_key.k_objectid = ~0U;
+ set_cpu_key_k_offset (&max_cpu_key, ~0U);
max_cpu_key.key_length = 3;
#ifdef CONFIG_QUOTA
diff --git a/fs/udf/udftime.c b/fs/udf/udftime.c
index 457a8fe..85d8dbe 100644
--- a/fs/udf/udftime.c
+++ b/fs/udf/udftime.c
@@ -46,7 +46,7 @@
#endif
/* How many days come before each month (0-12). */
-const unsigned short int __mon_yday[2][13] =
+static const unsigned short int __mon_yday[2][13] =
{
/* Normal years. */
{ 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 9278e9ab..93ce257 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -886,7 +886,6 @@
SetPageUptodate(page);
if (startio) {
- WARN_ON(page_dirty);
xfs_submit_page(page, wbc, bh_arr, cnt, 0, !page_dirty);
}
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index d0d412a..24fa3b1 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -565,7 +565,7 @@
.sendfile = linvfs_sendfile,
.unlocked_ioctl = linvfs_ioctl,
#ifdef CONFIG_COMPAT
- .compat_ioctl = xfs_compat_ioctl,
+ .compat_ioctl = linvfs_compat_ioctl,
#endif
.mmap = linvfs_file_mmap,
.open = linvfs_open,
@@ -587,7 +587,7 @@
.sendfile = linvfs_sendfile,
.unlocked_ioctl = linvfs_ioctl_invis,
#ifdef CONFIG_COMPAT
- .compat_ioctl = xfs_compat_invis_ioctl,
+ .compat_ioctl = linvfs_compat_invis_ioctl,
#endif
.mmap = linvfs_file_mmap,
.open = linvfs_open,
@@ -600,6 +600,9 @@
.read = generic_read_dir,
.readdir = linvfs_readdir,
.unlocked_ioctl = linvfs_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = linvfs_compat_ioctl,
+#endif
.fsync = linvfs_fsync,
};
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c
index 7a12c83..0f8f138 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2004 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2005 Silicon Graphics, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -58,8 +58,9 @@
__s32 ocount; /* output count pointer */
} xfs_fsop_bulkreq32_t;
-static unsigned long
-xfs_ioctl32_bulkstat(unsigned long arg)
+STATIC unsigned long
+xfs_ioctl32_bulkstat(
+ unsigned long arg)
{
xfs_fsop_bulkreq32_t __user *p32 = (void __user *)arg;
xfs_fsop_bulkreq_t __user *p = compat_alloc_user_space(sizeof(*p));
@@ -78,11 +79,11 @@
}
#endif
-static long
-__xfs_compat_ioctl(int mode, struct file *f, unsigned cmd, unsigned long arg)
+STATIC long
+__linvfs_compat_ioctl(int mode, struct file *f, unsigned cmd, unsigned long arg)
{
int error;
- struct inode *inode = f->f_dentry->d_inode;
+ struct inode *inode = f->f_dentry->d_inode;
vnode_t *vp = LINVFS_GET_VP(inode);
switch (cmd) {
@@ -152,12 +153,20 @@
return error;
}
-long xfs_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg)
+long
+linvfs_compat_ioctl(
+ struct file *f,
+ unsigned cmd,
+ unsigned long arg)
{
- return __xfs_compat_ioctl(0, f, cmd, arg);
+ return __linvfs_compat_ioctl(0, f, cmd, arg);
}
-long xfs_compat_invis_ioctl(struct file *f, unsigned cmd, unsigned long arg)
+long
+linvfs_compat_invis_ioctl(
+ struct file *f,
+ unsigned cmd,
+ unsigned long arg)
{
- return __xfs_compat_ioctl(IO_INVIS, f, cmd, arg);
+ return __linvfs_compat_ioctl(IO_INVIS, f, cmd, arg);
}
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.h b/fs/xfs/linux-2.6/xfs_ioctl32.h
index 779f69a..c874793 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.h
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2004 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2005 Silicon Graphics, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -30,5 +30,5 @@
* http://oss.sgi.com/projects/GenInfo/SGIGPLNoticeExplan/
*/
-long xfs_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg);
-long xfs_compat_invis_ioctl(struct file *f, unsigned cmd, unsigned long arg);
+long linvfs_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg);
+long linvfs_compat_invis_ioctl(struct file *f, unsigned cmd, unsigned long arg);
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 53dc658..455e2b2 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
@@ -66,7 +66,6 @@
#include "xfs_buf_item.h"
#include "xfs_utils.h"
#include "xfs_version.h"
-#include "xfs_ioctl32.h"
#include <linux/namei.h>
#include <linux/init.h>
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 991f8a6..469e1a7 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -278,7 +278,9 @@
switch (flags & (BMAPI_WRITE|BMAPI_ALLOCATE|BMAPI_UNWRITTEN)) {
case BMAPI_WRITE:
/* If we found an extent, return it */
- if (nimaps && (imap.br_startblock != HOLESTARTBLOCK)) {
+ if (nimaps &&
+ (imap.br_startblock != HOLESTARTBLOCK) &&
+ (imap.br_startblock != DELAYSTARTBLOCK)) {
xfs_iomap_map_trace(XFS_IOMAP_WRITE_MAP, io,
offset, count, iomapp, &imap, flags);
break;
diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h
index f32c203..93b840e 100644
--- a/include/asm-arm/arch-imx/imx-regs.h
+++ b/include/asm-arm/arch-imx/imx-regs.h
@@ -228,6 +228,30 @@
#define PD31_BIN_SPI2_TXD ( GPIO_PORTD | GPIO_BIN | 31 )
/*
+ * PWM controller
+ */
+#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */
+#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */
+#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */
+#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */
+
+#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */
+#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */
+#define PWMC_SWR (0x01<<16) /* Software Reset */
+#define PWMC_CLKSRC (0x01<<15) /* Clock Source */
+#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */
+#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */
+#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */
+#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */
+#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */
+#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
+#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */
+
+#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
+#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
+#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
+
+/*
* DMA Controller
*/
#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */
diff --git a/include/asm-arm/arch-s3c2410/regs-nand.h b/include/asm-arm/arch-s3c2410/regs-nand.h
index c443ac8..7cff235 100644
--- a/include/asm-arm/arch-s3c2410/regs-nand.h
+++ b/include/asm-arm/arch-s3c2410/regs-nand.h
@@ -1,16 +1,17 @@
/* linux/include/asm-arm/arch-s3c2410/regs-nand.h
*
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * S3C2410 clock register definitions
+ * S3C2410 NAND register definitions
*
* Changelog:
* 18-Aug-2004 BJD Copied file from 2.4 and updated
+ * 01-May-2005 BJD Added definitions for s3c2440 controller
*/
#ifndef __ASM_ARM_REGS_NAND
@@ -26,6 +27,22 @@
#define S3C2410_NFSTAT S3C2410_NFREG(0x10)
#define S3C2410_NFECC S3C2410_NFREG(0x14)
+#define S3C2440_NFCONT S3C2410_NFREG(0x04)
+#define S3C2440_NFCMD S3C2410_NFREG(0x08)
+#define S3C2440_NFADDR S3C2410_NFREG(0x0C)
+#define S3C2440_NFDATA S3C2410_NFREG(0x10)
+#define S3C2440_NFECCD0 S3C2410_NFREG(0x14)
+#define S3C2440_NFECCD1 S3C2410_NFREG(0x18)
+#define S3C2440_NFECCD S3C2410_NFREG(0x1C)
+#define S3C2440_NFSTAT S3C2410_NFREG(0x20)
+#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24)
+#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28)
+#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C)
+#define S3C2440_NFMECC1 S3C2410_NFREG(0x30)
+#define S3C2440_NFSECC S3C2410_NFREG(0x34)
+#define S3C2440_NFSBLK S3C2410_NFREG(0x38)
+#define S3C2440_NFEBLK S3C2410_NFREG(0x3C)
+
#define S3C2410_NFCONF_EN (1<<15)
#define S3C2410_NFCONF_512BYTE (1<<14)
#define S3C2410_NFCONF_4STEP (1<<13)
@@ -37,7 +54,28 @@
#define S3C2410_NFSTAT_BUSY (1<<0)
-/* think ECC can only be 8bit read? */
+#define S3C2440_NFCONF_BUSWIDTH_8 (0<<0)
+#define S3C2440_NFCONF_BUSWIDTH_16 (1<<0)
+#define S3C2440_NFCONF_ADVFLASH (1<<3)
+#define S3C2440_NFCONF_TACLS(x) ((x)<<12)
+#define S3C2440_NFCONF_TWRPH0(x) ((x)<<8)
+#define S3C2440_NFCONF_TWRPH1(x) ((x)<<4)
+
+#define S3C2440_NFCONT_LOCKTIGHT (1<<13)
+#define S3C2440_NFCONT_SOFTLOCK (1<<12)
+#define S3C2440_NFCONT_ILLEGALACC_EN (1<<10)
+#define S3C2440_NFCONT_RNBINT_EN (1<<9)
+#define S3C2440_NFCONT_RN_FALLING (1<<8)
+#define S3C2440_NFCONT_SPARE_ECCLOCK (1<<6)
+#define S3C2440_NFCONT_MAIN_ECCLOCK (1<<5)
+#define S3C2440_NFCONT_INITECC (1<<4)
+#define S3C2440_NFCONT_nFCE (1<<1)
+#define S3C2440_NFCONT_ENABLE (1<<0)
+
+#define S3C2440_NFSTAT_READY (1<<0)
+#define S3C2440_NFSTAT_nCE (1<<1)
+#define S3C2440_NFSTAT_RnB_CHANGE (1<<2)
+#define S3C2440_NFSTAT_ILLEGAL_ACCESS (1<<3)
#endif /* __ASM_ARM_REGS_NAND */
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
index 4ca3a8e..019c45d 100644
--- a/include/asm-arm/page.h
+++ b/include/asm-arm/page.h
@@ -114,19 +114,8 @@
unsigned long user);
#endif
-#define clear_user_page(addr,vaddr,pg) \
- do { \
- preempt_disable(); \
- __cpu_clear_user_page(addr, vaddr); \
- preempt_enable(); \
- } while (0)
-
-#define copy_user_page(to,from,vaddr,pg) \
- do { \
- preempt_disable(); \
- __cpu_copy_user_page(to, from, vaddr); \
- preempt_enable(); \
- } while (0)
+#define clear_user_page(addr,vaddr,pg) __cpu_clear_user_page(addr, vaddr)
+#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr)
#define clear_page(page) memzero((void *)(page), PAGE_SIZE)
extern void copy_page(void *to, const void *from);
@@ -171,6 +160,9 @@
#endif /* STRICT_MM_TYPECHECKS */
+/* the upper-most page table pointer */
+extern pmd_t *top_pmd;
+
/* Pure 2^n version of get_order */
static inline int get_order(unsigned long size)
{
diff --git a/include/asm-i386/linkage.h b/include/asm-i386/linkage.h
index af3d857..f4a6eba 100644
--- a/include/asm-i386/linkage.h
+++ b/include/asm-i386/linkage.h
@@ -5,9 +5,7 @@
#define FASTCALL(x) x __attribute__((regparm(3)))
#define fastcall __attribute__((regparm(3)))
-#ifdef CONFIG_REGPARM
-# define prevent_tail_call(ret) __asm__ ("" : "=r" (ret) : "0" (ret))
-#endif
+#define prevent_tail_call(ret) __asm__ ("" : "=r" (ret) : "0" (ret))
#ifdef CONFIG_X86_ALIGNMENT_16
#define __ALIGN .align 16,0x90
diff --git a/include/asm-i386/timer.h b/include/asm-i386/timer.h
index 40c54f6..c347098 100644
--- a/include/asm-i386/timer.h
+++ b/include/asm-i386/timer.h
@@ -53,6 +53,7 @@
extern unsigned long calibrate_tsc(void);
extern void init_cpu_khz(void);
+extern int recalibrate_cpu_khz(void);
#ifdef CONFIG_HPET_TIMER
extern struct init_timer_opts timer_hpet_init;
extern unsigned long calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr);
diff --git a/include/asm-ia64/ioctl32.h b/include/asm-ia64/ioctl32.h
deleted file mode 100644
index d0d227f..0000000
--- a/include/asm-ia64/ioctl32.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/ioctl32.h>
diff --git a/include/asm-ia64/perfmon.h b/include/asm-ia64/perfmon.h
index ed5416c..7f3333d 100644
--- a/include/asm-ia64/perfmon.h
+++ b/include/asm-ia64/perfmon.h
@@ -177,6 +177,10 @@
extern long perfmonctl(int fd, int cmd, void *arg, int narg);
+typedef struct {
+ void (*handler)(int irq, void *arg, struct pt_regs *regs);
+} pfm_intr_handler_desc_t;
+
extern void pfm_save_regs (struct task_struct *);
extern void pfm_load_regs (struct task_struct *);
@@ -187,6 +191,10 @@
extern void pfm_inherit(struct task_struct *task, struct pt_regs *regs);
extern void pfm_init_percpu(void);
extern void pfm_handle_work(void);
+extern int pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *h);
+extern int pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *h);
+
+
/*
* Reset PMD register flags
diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h
index 56d74ca..eb0395a 100644
--- a/include/asm-ia64/sn/sn_sal.h
+++ b/include/asm-ia64/sn/sn_sal.h
@@ -115,6 +115,13 @@
#define SAL_IROUTER_INTR_XMIT SAL_CONSOLE_INTR_XMIT
#define SAL_IROUTER_INTR_RECV SAL_CONSOLE_INTR_RECV
+/*
+ * Error Handling Features
+ */
+#define SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV 0x1
+#define SAL_ERR_FEAT_LOG_SBES 0x2
+#define SAL_ERR_FEAT_MFR_OVERRIDE 0x4
+#define SAL_ERR_FEAT_SBE_THRESHOLD 0xffff0000
/*
* SAL Error Codes
@@ -342,6 +349,25 @@
}
/*
+ * Set Error Handling Features
+ */
+static inline u64
+ia64_sn_plat_set_error_handling_features(void)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_REENTRANT(ret_stuff, SN_SAL_SET_ERROR_HANDLING_FEATURES,
+ (SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV | SAL_ERR_FEAT_LOG_SBES),
+ 0, 0, 0, 0, 0, 0);
+
+ return ret_stuff.status;
+}
+
+/*
* Checks for console input.
*/
static inline u64
@@ -472,7 +498,7 @@
ia64_sn_pod_mode(void)
{
struct ia64_sal_retval isrv;
- SAL_CALL(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0);
+ SAL_CALL_REENTRANT(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0);
if (isrv.status)
return 0;
return isrv.v0;
diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h
index 42fd106..c5883db 100644
--- a/include/asm-ppc/cpm2.h
+++ b/include/asm-ppc/cpm2.h
@@ -1039,6 +1039,52 @@
#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */
#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration Register 4-31
+ */
+#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */
+#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */
+#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */
+#define SIUMCR_CDIS 0x10000000 /* Core Disable */
+#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/
+#define SIUMCR_DPPC01 0x04000000 /* - " - */
+#define SIUMCR_DPPC10 0x08000000 /* - " - */
+#define SIUMCR_DPPC11 0x0c000000 /* - " - */
+#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */
+#define SIUMCR_L2CPC01 0x01000000 /* - " - */
+#define SIUMCR_L2CPC10 0x02000000 /* - " - */
+#define SIUMCR_L2CPC11 0x03000000 /* - " - */
+#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */
+#define SIUMCR_LBPC01 0x00400000 /* - " - */
+#define SIUMCR_LBPC10 0x00800000 /* - " - */
+#define SIUMCR_LBPC11 0x00c00000 /* - " - */
+#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/
+#define SIUMCR_APPC01 0x00100000 /* - " - */
+#define SIUMCR_APPC10 0x00200000 /* - " - */
+#define SIUMCR_APPC11 0x00300000 /* - " - */
+#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */
+#define SIUMCR_CS10PC01 0x00040000 /* - " - */
+#define SIUMCR_CS10PC10 0x00080000 /* - " - */
+#define SIUMCR_CS10PC11 0x000c0000 /* - " - */
+#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */
+#define SIUMCR_BCTLC01 0x00010000 /* - " - */
+#define SIUMCR_BCTLC10 0x00020000 /* - " - */
+#define SIUMCR_BCTLC11 0x00030000 /* - " - */
+#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */
+#define SIUMCR_MMR01 0x00004000 /* - " - */
+#define SIUMCR_MMR10 0x00008000 /* - " - */
+#define SIUMCR_MMR11 0x0000c000 /* - " - */
+#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control Register 9-8
+*/
+#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */
+#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */
+#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */
+#define SCCR_PCIDF_SHIFT 3
+
+
#endif /* __CPM2__ */
#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/m8260_pci.h b/include/asm-ppc/m8260_pci.h
index 163a6b9..bf9e05d 100644
--- a/include/asm-ppc/m8260_pci.h
+++ b/include/asm-ppc/m8260_pci.h
@@ -19,6 +19,7 @@
* Define the vendor/device ID for the MPC8265.
*/
#define PCI_DEVICE_ID_MPC8265 ((0x18C0 << 16) | PCI_VENDOR_ID_MOTOROLA)
+#define PCI_DEVICE_ID_MPC8272 ((0x18C1 << 16) | PCI_VENDOR_ID_MOTOROLA)
#define M8265_PCIBR0 0x101ac
#define M8265_PCIBR1 0x101b0
diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h
index d820894..89eb8a2 100644
--- a/include/asm-ppc/mpc8260.h
+++ b/include/asm-ppc/mpc8260.h
@@ -41,7 +41,7 @@
#endif
#ifdef CONFIG_PCI_8260
-#include <syslib/m8260_pci.h>
+#include <syslib/m82xx_pci.h>
#endif
/* Make sure the memory translation stuff is there if PCI not used.
diff --git a/include/asm-ppc64/iSeries/mf.h b/include/asm-ppc64/iSeries/mf.h
index 2e59a8e..db333e1 100644
--- a/include/asm-ppc64/iSeries/mf.h
+++ b/include/asm-ppc64/iSeries/mf.h
@@ -52,6 +52,7 @@
extern void mf_init(void);
extern int mf_get_rtc(struct rtc_time *tm);
+extern int mf_get_boot_rtc(struct rtc_time *tm);
extern int mf_set_rtc(struct rtc_time *tm);
#endif /* _ASM_PPC64_ISERIES_MF_H */
diff --git a/include/asm-ppc64/processor.h b/include/asm-ppc64/processor.h
index 0035efe..809c634b 100644
--- a/include/asm-ppc64/processor.h
+++ b/include/asm-ppc64/processor.h
@@ -120,103 +120,18 @@
/* Special Purpose Registers (SPRNs)*/
-#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
#define SPRN_CTR 0x009 /* Count Register */
#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
-#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
-#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
+#define DABR_TRANSLATION (1UL << 2)
#define SPRN_DAR 0x013 /* Data Address Register */
-#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */
-#define DBCR_EDM 0x80000000
-#define DBCR_IDM 0x40000000
-#define DBCR_RST(x) (((x) & 0x3) << 28)
-#define DBCR_RST_NONE 0
-#define DBCR_RST_CORE 1
-#define DBCR_RST_CHIP 2
-#define DBCR_RST_SYSTEM 3
-#define DBCR_IC 0x08000000 /* Instruction Completion Debug Evnt */
-#define DBCR_BT 0x04000000 /* Branch Taken Debug Event */
-#define DBCR_EDE 0x02000000 /* Exception Debug Event */
-#define DBCR_TDE 0x01000000 /* TRAP Debug Event */
-#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
-#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
-#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
-#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
-#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
-#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
-#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
-#define DAC_BYTE 0
-#define DAC_HALF 1
-#define DAC_WORD 2
-#define DAC_QUAD 3
-#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
-#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
-#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
-#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
-#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
-#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
-#define DBCR_SIA 0x00000008 /* Second IAC Enable */
-#define DBCR_SDA 0x00000004 /* Second DAC Enable */
-#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
-#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
-#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
-#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
-#define SPRN_DBSR 0x3F0 /* Debug Status Register */
-#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
-#define DCCR_NOCACHE 0 /* Noncacheable */
-#define DCCR_CACHE 1 /* Cacheable */
-#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
-#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
-#define DCWR_COPY 0 /* Copy-back */
-#define DCWR_WRITE 1 /* Write-through */
-#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
#define SPRN_DEC 0x016 /* Decrement Register */
-#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
#define DSISR_NOHPTE 0x40000000 /* no translation found */
#define DSISR_PROTFAULT 0x08000000 /* protection fault */
#define DSISR_ISSTORE 0x02000000 /* access was a store */
#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */
#define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */
-#define SPRN_EAR 0x11A /* External Address Register */
-#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
-#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
-#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
-#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
-#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
-#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
-#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
-#define ESR_PTR 0x02000000 /* Program Exception - Trap */
-#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
-#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */
-#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
-#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
-#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
-#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
-#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
-#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
-#define HID0_SBCLK (1<<27)
-#define HID0_EICE (1<<26)
-#define HID0_ECLK (1<<25)
-#define HID0_PAR (1<<24)
-#define HID0_DOZE (1<<23)
-#define HID0_NAP (1<<22)
-#define HID0_SLEEP (1<<21)
-#define HID0_DPM (1<<20)
-#define HID0_ICE (1<<15) /* Instruction Cache Enable */
-#define HID0_DCE (1<<14) /* Data Cache Enable */
-#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
-#define HID0_DLOCK (1<<12) /* Data Cache Lock */
-#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
-#define HID0_DCI (1<<10) /* Data Cache Invalidate */
-#define HID0_SPD (1<<9) /* Speculative disable */
-#define HID0_SGE (1<<7) /* Store Gathering Enable */
-#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
-#define HID0_BTIC (1<<5) /* Branch Target Instruction Cache Enable */
-#define HID0_ABE (1<<3) /* Address Broadcast Enable */
-#define HID0_BHTE (1<<2) /* Branch History Table Enable */
-#define HID0_BTCD (1<<1) /* Branch target cache disable */
#define SPRN_MSRDORM 0x3F1 /* Hardware Implementation Register 1 */
#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
@@ -225,23 +140,8 @@
#define SPRN_HID5 0x3F6 /* 970 HID5 */
#define SPRN_TSC 0x3FD /* Thread switch control */
#define SPRN_TST 0x3FC /* Thread switch timeout */
-#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
-#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
-#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
-#define ICCR_NOCACHE 0 /* Noncacheable */
-#define ICCR_CACHE 1 /* Cacheable */
-#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
-#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
-#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
-#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
-#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
#define SPRN_LR 0x008 /* Link Register */
-#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
-#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
-#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
-#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
-#define SPRN_PID 0x3B1 /* Process ID */
#define SPRN_PIR 0x3FF /* Processor Identification Register */
#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
#define SPRN_PURR 0x135 /* Processor Utilization of Resources Register */
@@ -249,9 +149,6 @@
#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
-#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
-#define SGR_NORMAL 0
-#define SGR_GUARDED 1
#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
@@ -264,50 +161,12 @@
#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, W/O) */
#define SPRN_TBWU 0x11D /* Time Base Write Upper Register (super, W/O) */
#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
-#define SPRN_TCR 0x3DA /* Timer Control Register */
-#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
-#define WP_2_17 0 /* 2^17 clocks */
-#define WP_2_21 1 /* 2^21 clocks */
-#define WP_2_25 2 /* 2^25 clocks */
-#define WP_2_29 3 /* 2^29 clocks */
-#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */
-#define WRC_NONE 0 /* No reset will occur */
-#define WRC_CORE 1 /* Core reset will occur */
-#define WRC_CHIP 2 /* Chip reset will occur */
-#define WRC_SYSTEM 3 /* System reset will occur */
-#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
-#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
-#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
-#define FP_2_9 0 /* 2^9 clocks */
-#define FP_2_13 1 /* 2^13 clocks */
-#define FP_2_17 2 /* 2^17 clocks */
-#define FP_2_21 3 /* 2^21 clocks */
-#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
-#define TCR_ARE 0x00400000 /* Auto Reload Enable */
-#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
-#define THRM1_TIN (1<<0)
-#define THRM1_TIV (1<<1)
-#define THRM1_THRES (0x7f<<2)
-#define THRM1_TID (1<<29)
-#define THRM1_TIE (1<<30)
-#define THRM1_V (1<<31)
-#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
-#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
-#define THRM3_E (1<<31)
-#define SPRN_TSR 0x3D8 /* Timer Status Register */
-#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
-#define TSR_WIS 0x40000000 /* WDT Interrupt Status */
-#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
-#define WRS_NONE 0 /* No WDT reset occurred */
-#define WRS_CORE 1 /* WDT forced core reset */
-#define WRS_CHIP 2 /* WDT forced chip reset */
-#define WRS_SYSTEM 3 /* WDT forced system reset */
-#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
-#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
#define SPRN_XER 0x001 /* Fixed Point Exception Register */
-#define SPRN_ZPR 0x3B0 /* Zone Protection Register */
#define SPRN_VRSAVE 0x100 /* Vector save */
+#define SPRN_CTRLF 0x088
+#define SPRN_CTRLT 0x098
+#define CTRL_RUNLATCH 0x1
/* Performance monitor SPRs */
#define SPRN_SIAR 780
@@ -352,28 +211,19 @@
#define CTR SPRN_CTR /* Counter Register */
#define DAR SPRN_DAR /* Data Address Register */
#define DABR SPRN_DABR /* Data Address Breakpoint Register */
-#define DCMP SPRN_DCMP /* Data TLB Compare Register */
#define DEC SPRN_DEC /* Decrement Register */
-#define DMISS SPRN_DMISS /* Data TLB Miss Register */
#define DSISR SPRN_DSISR /* Data Storage Interrupt Status Register */
-#define EAR SPRN_EAR /* External Address Register */
-#define HASH1 SPRN_HASH1 /* Primary Hash Address Register */
-#define HASH2 SPRN_HASH2 /* Secondary Hash Address Register */
#define HID0 SPRN_HID0 /* Hardware Implementation Register 0 */
#define MSRDORM SPRN_MSRDORM /* MSR Dormant Register */
#define NIADORM SPRN_NIADORM /* NIA Dormant Register */
#define TSC SPRN_TSC /* Thread switch control */
#define TST SPRN_TST /* Thread switch timeout */
#define IABR SPRN_IABR /* Instruction Address Breakpoint Register */
-#define ICMP SPRN_ICMP /* Instruction TLB Compare Register */
-#define IMISS SPRN_IMISS /* Instruction TLB Miss Register */
-#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */
#define L2CR SPRN_L2CR /* PPC 750 L2 control register */
#define __LR SPRN_LR
#define PVR SPRN_PVR /* Processor Version */
#define PIR SPRN_PIR /* Processor ID */
#define PURR SPRN_PURR /* Processor Utilization of Resource Register */
-//#define RPA SPRN_RPA /* Required Physical Address Register */
#define SDR1 SPRN_SDR1 /* MMU hash base register */
#define SPR0 SPRN_SPRG0 /* Supervisor Private Registers */
#define SPR1 SPRN_SPRG1
@@ -389,10 +239,6 @@
#define TBRU SPRN_TBRU /* Time Base Read Upper Register */
#define TBWL SPRN_TBWL /* Time Base Write Lower Register */
#define TBWU SPRN_TBWU /* Time Base Write Upper Register */
-#define ICTC 1019
-#define THRM1 SPRN_THRM1 /* Thermal Management Register 1 */
-#define THRM2 SPRN_THRM2 /* Thermal Management Register 2 */
-#define THRM3 SPRN_THRM3 /* Thermal Management Register 3 */
#define XER SPRN_XER
/* Processor Version Register (PVR) field extraction */
@@ -436,12 +282,6 @@
#define XGLUE(a,b) a##b
#define GLUE(a,b) XGLUE(a,b)
-/* iSeries CTRL register (for runlatch) */
-
-#define CTRLT 0x098
-#define CTRLF 0x088
-#define RUNLATCH 0x0001
-
#ifdef __ASSEMBLY__
#define _GLOBAL(name) \
@@ -656,6 +496,24 @@
#define HAVE_ARCH_PICK_MMAP_LAYOUT
+static inline void ppc64_runlatch_on(void)
+{
+ unsigned long ctrl;
+
+ ctrl = mfspr(SPRN_CTRLF);
+ ctrl |= CTRL_RUNLATCH;
+ mtspr(SPRN_CTRLT, ctrl);
+}
+
+static inline void ppc64_runlatch_off(void)
+{
+ unsigned long ctrl;
+
+ ctrl = mfspr(SPRN_CTRLF);
+ ctrl &= ~CTRL_RUNLATCH;
+ mtspr(SPRN_CTRLT, ctrl);
+}
+
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-ppc64/prom.h b/include/asm-ppc64/prom.h
index 2440a2c..04b1a84 100644
--- a/include/asm-ppc64/prom.h
+++ b/include/asm-ppc64/prom.h
@@ -147,9 +147,7 @@
struct device_node *sibling;
struct device_node *next; /* next device of same type */
struct device_node *allnext; /* next in list of all nodes */
- struct proc_dir_entry *pde; /* this node's proc directory */
- struct proc_dir_entry *name_link; /* name symlink */
- struct proc_dir_entry *addr_link; /* addr symlink */
+ struct proc_dir_entry *pde; /* this node's proc directory */
struct kref kref;
unsigned long _flags;
};
@@ -174,15 +172,6 @@
dn->pde = de;
}
-static void inline set_node_name_link(struct device_node *dn, struct proc_dir_entry *de)
-{
- dn->name_link = de;
-}
-
-static void inline set_node_addr_link(struct device_node *dn, struct proc_dir_entry *de)
-{
- dn->addr_link = de;
-}
/* OBSOLETE: Old stlye node lookup */
extern struct device_node *find_devices(const char *name);
diff --git a/include/asm-ppc64/thread_info.h b/include/asm-ppc64/thread_info.h
index 037b5e0..48b7900 100644
--- a/include/asm-ppc64/thread_info.h
+++ b/include/asm-ppc64/thread_info.h
@@ -96,7 +96,7 @@
#define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
#define TIF_32BIT 5 /* 32 bit binary */
-#define TIF_RUN_LIGHT 6 /* iSeries run light */
+/* #define SPARE 6 */
#define TIF_ABI_PENDING 7 /* 32/64 bit switch needed */
#define TIF_SYSCALL_AUDIT 8 /* syscall auditing active */
#define TIF_SINGLESTEP 9 /* singlestepping active */
@@ -110,7 +110,7 @@
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_32BIT (1<<TIF_32BIT)
-#define _TIF_RUN_LIGHT (1<<TIF_RUN_LIGHT)
+/* #define _SPARE (1<<SPARE) */
#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h
index d82f883..4bbbd9f 100644
--- a/include/asm-sh/thread_info.h
+++ b/include/asm-sh/thread_info.h
@@ -27,7 +27,7 @@
#endif
-#define PREEMPT_ACTIVE 0x4000000
+#define PREEMPT_ACTIVE 0x10000000
/*
* macros/functions for gaining access to the thread information structure
diff --git a/include/asm-sh64/thread_info.h b/include/asm-sh64/thread_info.h
index e65f394..8a32d6b 100644
--- a/include/asm-sh64/thread_info.h
+++ b/include/asm-sh64/thread_info.h
@@ -73,7 +73,7 @@
#define THREAD_SIZE 8192
-#define PREEMPT_ACTIVE 0x4000000
+#define PREEMPT_ACTIVE 0x10000000
/* thread information flags */
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
diff --git a/include/asm-sparc64/iommu.h b/include/asm-sparc64/iommu.h
index 5fd16e4..0de7a3d 100644
--- a/include/asm-sparc64/iommu.h
+++ b/include/asm-sparc64/iommu.h
@@ -16,4 +16,6 @@
#define IOPTE_CACHE 0x0000000000000010UL /* Cached (in UPA E-cache) */
#define IOPTE_WRITE 0x0000000000000002UL /* Writeable */
+#define IOMMU_NUM_CTXS 4096
+
#endif /* !(_SPARC_IOMMU_H) */
diff --git a/include/asm-sparc64/pbm.h b/include/asm-sparc64/pbm.h
index 9299963..4c15610 100644
--- a/include/asm-sparc64/pbm.h
+++ b/include/asm-sparc64/pbm.h
@@ -15,6 +15,7 @@
#include <asm/io.h>
#include <asm/page.h>
#include <asm/oplib.h>
+#include <asm/iommu.h>
/* The abstraction used here is that there are PCI controllers,
* each with one (Sabre) or two (PSYCHO/SCHIZO) PCI bus modules
@@ -40,9 +41,6 @@
*/
spinlock_t lock;
- /* Context allocator. */
- unsigned int iommu_cur_ctx;
-
/* IOMMU page table, a linear array of ioptes. */
iopte_t *page_table; /* The page table itself. */
int page_table_sz_bits; /* log2 of ow many pages does it map? */
@@ -87,6 +85,10 @@
u16 flush;
} alloc_info[PBM_NCLUSTERS];
+ /* CTX allocation. */
+ unsigned long ctx_lowest_free;
+ unsigned long ctx_bitmap[IOMMU_NUM_CTXS / (sizeof(unsigned long) * 8)];
+
/* Here a PCI controller driver describes the areas of
* PCI memory space where DMA to/from physical memory
* are addressed. Drivers interrogate the PCI layer
diff --git a/include/asm-sparc64/spitfire.h b/include/asm-sparc64/spitfire.h
index ad78ce6..9d7613e 100644
--- a/include/asm-sparc64/spitfire.h
+++ b/include/asm-sparc64/spitfire.h
@@ -48,6 +48,9 @@
extern enum ultra_tlb_layout tlb_type;
+extern int cheetah_pcache_forced_on;
+extern void cheetah_enable_pcache(void);
+
#define sparc64_highest_locked_tlbent() \
(tlb_type == spitfire ? \
SPITFIRE_HIGHEST_LOCKED_TLBENT : \
diff --git a/include/asm-um/arch-signal-i386.h b/include/asm-um/arch-signal-i386.h
deleted file mode 100644
index e69de29..0000000
--- a/include/asm-um/arch-signal-i386.h
+++ /dev/null
diff --git a/include/asm-um/elf-i386.h b/include/asm-um/elf-i386.h
index b72e235..9bab712 100644
--- a/include/asm-um/elf-i386.h
+++ b/include/asm-um/elf-i386.h
@@ -5,7 +5,7 @@
#ifndef __UM_ELF_I386_H
#define __UM_ELF_I386_H
-#include "user.h"
+#include <asm/user.h>
#define R_386_NONE 0
#define R_386_32 1
diff --git a/include/asm-um/elf-x86_64.h b/include/asm-um/elf-x86_64.h
index 19309d0..8a8246d 100644
--- a/include/asm-um/elf-x86_64.h
+++ b/include/asm-um/elf-x86_64.h
@@ -8,6 +8,27 @@
#include <asm/user.h>
+/* x86-64 relocation types, taken from asm-x86_64/elf.h */
+#define R_X86_64_NONE 0 /* No reloc */
+#define R_X86_64_64 1 /* Direct 64 bit */
+#define R_X86_64_PC32 2 /* PC relative 32 bit signed */
+#define R_X86_64_GOT32 3 /* 32 bit GOT entry */
+#define R_X86_64_PLT32 4 /* 32 bit PLT address */
+#define R_X86_64_COPY 5 /* Copy symbol at runtime */
+#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */
+#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */
+#define R_X86_64_RELATIVE 8 /* Adjust by program base */
+#define R_X86_64_GOTPCREL 9 /* 32 bit signed pc relative
+ offset to GOT */
+#define R_X86_64_32 10 /* Direct 32 bit zero extended */
+#define R_X86_64_32S 11 /* Direct 32 bit sign extended */
+#define R_X86_64_16 12 /* Direct 16 bit zero extended */
+#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */
+#define R_X86_64_8 14 /* Direct 8 bit sign extended */
+#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */
+
+#define R_X86_64_NUM 16
+
typedef unsigned long elf_greg_t;
#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
@@ -44,7 +65,8 @@
} while (0)
#ifdef TIF_IA32 /* XXX */
- clear_thread_flag(TIF_IA32); \
+#error XXX, indeed
+ clear_thread_flag(TIF_IA32);
#endif
#define USE_ELF_CORE_DUMP
diff --git a/include/asm-um/elf.h b/include/asm-um/elf.h
deleted file mode 100644
index e69de29..0000000
--- a/include/asm-um/elf.h
+++ /dev/null
diff --git a/include/asm-um/page.h b/include/asm-um/page.h
index 504ea8e..5afee8a 100644
--- a/include/asm-um/page.h
+++ b/include/asm-um/page.h
@@ -98,7 +98,13 @@
extern unsigned long to_phys(void *virt);
extern void *to_virt(unsigned long phys);
-#define __pa(virt) to_phys((void *) virt)
+
+/* Cast to unsigned long before casting to void * to avoid a warning from
+ * mmap_kmem about cutting a long long down to a void *. Not sure that
+ * casting is the right thing, but 32-bit UML can't have 64-bit virtual
+ * addresses
+ */
+#define __pa(virt) to_phys((void *) (unsigned long) virt)
#define __va(phys) to_virt((unsigned long) phys)
#define page_to_pfn(page) ((page) - mem_map)
diff --git a/include/asm-um/pgtable.h b/include/asm-um/pgtable.h
index 510e513..a880409 100644
--- a/include/asm-um/pgtable.h
+++ b/include/asm-um/pgtable.h
@@ -114,17 +114,9 @@
extern unsigned long pg0[1024];
/*
- * BAD_PAGETABLE is used when we need a bogus page-table, while
- * BAD_PAGE is used for a bogus page.
- *
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
*/
-extern pte_t __bad_page(void);
-extern pte_t * __bad_pagetable(void);
-
-#define BAD_PAGETABLE __bad_pagetable()
-#define BAD_PAGE __bad_page()
#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page)
diff --git a/include/asm-um/thread_info.h b/include/asm-um/thread_info.h
index a10ea15..1feaaf1 100644
--- a/include/asm-um/thread_info.h
+++ b/include/asm-um/thread_info.h
@@ -41,18 +41,17 @@
#define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack)
+#define THREAD_SIZE ((1 << CONFIG_KERNEL_STACK_ORDER) * PAGE_SIZE)
/* how to get the thread information struct from C */
static inline struct thread_info *current_thread_info(void)
{
struct thread_info *ti;
- unsigned long mask = PAGE_SIZE *
- (1 << CONFIG_KERNEL_STACK_ORDER) - 1;
- ti = (struct thread_info *) (((unsigned long) &ti) & ~mask);
+ unsigned long mask = THREAD_SIZE - 1;
+ ti = (struct thread_info *) (((unsigned long) &ti) & ~mask);
return ti;
}
/* thread information allocation */
-#define THREAD_SIZE ((1 << CONFIG_KERNEL_STACK_ORDER) * PAGE_SIZE)
#define alloc_thread_info(tsk) \
((struct thread_info *) kmalloc(THREAD_SIZE, GFP_KERNEL))
#define free_thread_info(ti) kfree(ti)
@@ -62,7 +61,7 @@
#endif
-#define PREEMPT_ACTIVE 0x4000000
+#define PREEMPT_ACTIVE 0x10000000
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
#define TIF_SIGPENDING 1 /* signal pending */
diff --git a/include/asm-x86_64/apicdef.h b/include/asm-x86_64/apicdef.h
index 3d7627f..bfebdb6 100644
--- a/include/asm-x86_64/apicdef.h
+++ b/include/asm-x86_64/apicdef.h
@@ -112,7 +112,7 @@
#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
-#define MAX_IO_APICS 32
+#define MAX_IO_APICS 128
/*
* All x86-64 systems are xAPIC compatible.
diff --git a/include/asm-x86_64/bug.h b/include/asm-x86_64/bug.h
index bdbf66e..3d2a666 100644
--- a/include/asm-x86_64/bug.h
+++ b/include/asm-x86_64/bug.h
@@ -21,6 +21,8 @@
asm volatile("ud2 ; .quad %c1 ; .short %c0" :: \
"i"(__LINE__), "i" (__stringify(__FILE__)))
void out_of_line_bug(void);
+#else
+static inline void out_of_line_bug(void) { }
#endif
#include <asm-generic/bug.h>
diff --git a/include/asm-x86_64/io_apic.h b/include/asm-x86_64/io_apic.h
index 7efc932..3257374 100644
--- a/include/asm-x86_64/io_apic.h
+++ b/include/asm-x86_64/io_apic.h
@@ -202,7 +202,6 @@
#define io_apic_assign_pci_irqs (mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
#ifdef CONFIG_ACPI_BOOT
-extern int io_apic_get_unique_id (int ioapic, int apic_id);
extern int io_apic_get_version (int ioapic);
extern int io_apic_get_redir_entries (int ioapic);
extern int io_apic_set_pci_routing (int ioapic, int pin, int irq, int, int);
diff --git a/include/asm-x86_64/ioctl32.h b/include/asm-x86_64/ioctl32.h
deleted file mode 100644
index d0d227f..0000000
--- a/include/asm-x86_64/ioctl32.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/ioctl32.h>
diff --git a/include/asm-x86_64/nmi.h b/include/asm-x86_64/nmi.h
index 21d56b0..d3abfc6 100644
--- a/include/asm-x86_64/nmi.h
+++ b/include/asm-x86_64/nmi.h
@@ -53,5 +53,7 @@
extern int panic_on_timeout;
extern int unknown_nmi_panic;
+
+extern int check_nmi_watchdog(void);
#endif /* ASM_NMI_H */
diff --git a/include/asm-x86_64/processor.h b/include/asm-x86_64/processor.h
index f0581c3..d641b19 100644
--- a/include/asm-x86_64/processor.h
+++ b/include/asm-x86_64/processor.h
@@ -62,7 +62,6 @@
int x86_tlbsize; /* number of 4K pages in DTLB/ITLB combined(in pages)*/
__u8 x86_virt_bits, x86_phys_bits;
__u8 x86_num_cores;
- __u8 x86_apicid;
__u32 x86_power;
__u32 extended_cpuid_level; /* Max extended CPUID function supported */
unsigned long loops_per_jiffy;
@@ -159,9 +158,9 @@
/*
- * User space process size. 47bits.
+ * User space process size. 47bits minus one guard page.
*/
-#define TASK_SIZE (0x800000000000UL)
+#define TASK_SIZE (0x800000000000UL - 4096)
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
diff --git a/include/asm-x86_64/proto.h b/include/asm-x86_64/proto.h
index d0f8f8b..f2f0736 100644
--- a/include/asm-x86_64/proto.h
+++ b/include/asm-x86_64/proto.h
@@ -30,6 +30,11 @@
extern void iommu_hole_init(void);
extern void time_init_gtod(void);
+extern int pmtimer_mark_offset(void);
+extern unsigned int do_gettimeoffset_pm(void);
+extern u32 pmtmr_ioport;
+extern unsigned long long monotonic_base;
+extern int sysctl_vsyscall;
extern void do_softirq_thunk(void);
diff --git a/include/asm-x86_64/vsyscall.h b/include/asm-x86_64/vsyscall.h
index b0c8d43..2872da2 100644
--- a/include/asm-x86_64/vsyscall.h
+++ b/include/asm-x86_64/vsyscall.h
@@ -25,6 +25,7 @@
#define VXTIME_TSC 1
#define VXTIME_HPET 2
+#define VXTIME_PMTMR 3
struct vxtime_data {
long hpet_address; /* HPET base address */
@@ -54,6 +55,8 @@
extern int sysctl_vsyscall;
extern seqlock_t xtime_lock;
+extern int sysctl_vsyscall;
+
#define ARCH_HAVE_XTIME_LOCK 1
#endif /* __KERNEL__ */
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index aefe6d0..d5a55bd 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -25,6 +25,8 @@
#ifndef _LINUX_ACPI_H
#define _LINUX_ACPI_H
+#ifdef CONFIG_ACPI
+
#ifndef _LINUX
#define _LINUX
#endif
@@ -533,4 +535,5 @@
extern int pnpacpi_disabled;
-#endif /*_LINUX_ACPI_H*/
+#endif /* CONFIG_ACPI */
+#endif /*_LINUX_ACPI_H*/
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index f21af06..927daa8 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -49,7 +49,7 @@
/* Frequency values here are CPU kHz so that hardware which doesn't run
* with some frequencies can complain without having to guess what per
* cent / per mille means.
- * Maximum transition latency is in microseconds - if it's unknown,
+ * Maximum transition latency is in nanoseconds - if it's unknown,
* CPUFREQ_ETERNAL shall be used.
*/
diff --git a/include/linux/device.h b/include/linux/device.h
index cf47045..df94c0d 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -273,9 +273,6 @@
BIOS data relevant to device) */
struct dev_pm_info power;
- u32 detach_state; /* State to enter when device is
- detached from its driver. */
-
u64 *dma_mask; /* dma mask (if dma'able device) */
u64 coherent_dma_mask;/* Like dma_mask, but for
alloc_coherent mappings as
diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h
new file mode 100644
index 0000000..0008e2a
--- /dev/null
+++ b/include/linux/dm9000.h
@@ -0,0 +1,36 @@
+/* include/linux/dm9000.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for dm9000 platform data
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifndef __DM9000_PLATFORM_DATA
+#define __DM9000_PLATFORM_DATA __FILE__
+
+/* IO control flags */
+
+#define DM9000_PLATF_8BITONLY (0x0001)
+#define DM9000_PLATF_16BITONLY (0x0002)
+#define DM9000_PLATF_32BITONLY (0x0004)
+
+/* platfrom data for platfrom device structure's platfrom_data field */
+
+struct dm9000_plat_data {
+ unsigned int flags;
+
+ /* allow replacement IO routines */
+
+ void (*inblk)(void __iomem *reg, void *data, int len);
+ void (*outblk)(void __iomem *reg, void *data, int len);
+ void (*dumpblk)(void __iomem *reg, int len);
+};
+
+#endif /* __DM9000_PLATFORM_DATA */
+
diff --git a/include/linux/err.h b/include/linux/err.h
index 17c55df..ff71d2a 100644
--- a/include/linux/err.h
+++ b/include/linux/err.h
@@ -13,6 +13,8 @@
* This should be a per-architecture thing, to allow different
* error and pointer decisions.
*/
+#define IS_ERR_VALUE(x) unlikely((x) > (unsigned long)-1000L)
+
static inline void *ERR_PTR(long error)
{
return (void *) error;
@@ -25,7 +27,7 @@
static inline long IS_ERR(const void *ptr)
{
- return unlikely((unsigned long)ptr > (unsigned long)-1000L);
+ return IS_ERR_VALUE((unsigned long)ptr);
}
#endif /* _LINUX_ERR_H */
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 220748b..a147825 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -56,18 +56,32 @@
}
/**
+ * is_multicast_ether_addr - Determine if the given Ethernet address is a
+ * multicast address.
+ *
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is a multicast address.
+ */
+static inline int is_multicast_ether_addr(const u8 *addr)
+{
+ return addr[0] & 0x01;
+}
+
+/**
* is_valid_ether_addr - Determine if the given Ethernet address is valid
* @addr: Pointer to a six-byte array containing the Ethernet address
*
* Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
- * a multicast address, and is not FF:FF:FF:FF:FF:FF. The multicast
- * and FF:FF:... tests are combined into the single test "!(addr[0]&1)".
+ * a multicast address, and is not FF:FF:FF:FF:FF:FF.
*
* Return true if the address is valid.
*/
static inline int is_valid_ether_addr(const u8 *addr)
{
- return !(addr[0]&1) && !is_zero_ether_addr(addr);
+ /* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
+ * explicitly check for it here. */
+ return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr);
}
/**
@@ -83,6 +97,6 @@
addr [0] &= 0xfe; /* clear multicast bit */
addr [0] |= 0x02; /* set local assignment bit (IEEE802) */
}
-#endif
+#endif /* __KERNEL__ */
#endif /* _LINUX_ETHERDEVICE_H */
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index c85b210..a0ab26a 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -256,6 +256,7 @@
u32 ethtool_op_get_link(struct net_device *dev);
u32 ethtool_op_get_tx_csum(struct net_device *dev);
int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
+int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data);
u32 ethtool_op_get_sg(struct net_device *dev);
int ethtool_op_set_sg(struct net_device *dev, u32 data);
u32 ethtool_op_get_tso(struct net_device *dev);
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index b1272f8..cd623ec 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -67,6 +67,8 @@
void gameport_close(struct gameport *gameport);
void gameport_rescan(struct gameport *gameport);
+#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
+
void __gameport_register_port(struct gameport *gameport, struct module *owner);
static inline void gameport_register_port(struct gameport *gameport)
{
@@ -75,6 +77,29 @@
void gameport_unregister_port(struct gameport *gameport);
+void gameport_set_phys(struct gameport *gameport, const char *fmt, ...)
+ __attribute__ ((format (printf, 2, 3)));
+
+#else
+
+static inline void gameport_register_port(struct gameport *gameport)
+{
+ return;
+}
+
+static inline void gameport_unregister_port(struct gameport *gameport)
+{
+ return;
+}
+
+static inline void gameport_set_phys(struct gameport *gameport,
+ const char *fmt, ...)
+{
+ return;
+}
+
+#endif
+
static inline struct gameport *gameport_allocate_port(void)
{
struct gameport *gameport = kcalloc(1, sizeof(struct gameport), GFP_KERNEL);
@@ -92,9 +117,6 @@
strlcpy(gameport->name, name, sizeof(gameport->name));
}
-void gameport_set_phys(struct gameport *gameport, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-
/*
* Use the following fucntions to manipulate gameport's per-port
* driver-specific data.
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index ebc712e..8336dba 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -43,13 +43,17 @@
#define __IRQ_MASK(x) ((1UL << (x))-1)
#define PREEMPT_MASK (__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)
-#define HARDIRQ_MASK (__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
#define SOFTIRQ_MASK (__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT)
+#define HARDIRQ_MASK (__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
#define PREEMPT_OFFSET (1UL << PREEMPT_SHIFT)
#define SOFTIRQ_OFFSET (1UL << SOFTIRQ_SHIFT)
#define HARDIRQ_OFFSET (1UL << HARDIRQ_SHIFT)
+#if PREEMPT_ACTIVE < (1 << (HARDIRQ_SHIFT + HARDIRQ_BITS))
+#error PREEMPT_ACTIVE is too low!
+#endif
+
#define hardirq_count() (preempt_count() & HARDIRQ_MASK)
#define softirq_count() (preempt_count() & SOFTIRQ_MASK)
#define irq_count() (preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK))
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 9cfc099..336d6e5 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -664,7 +664,6 @@
struct request *rq; /* current request */
struct ide_drive_s *next; /* circular list of hwgroup drives */
- struct ide_driver_s *driver;/* (ide_driver_t *) */
void *driver_data; /* extra driver data */
struct hd_driveid *id; /* drive model identification info */
struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
@@ -758,6 +757,8 @@
struct semaphore gendev_rel_sem; /* to deal with device release() */
} ide_drive_t;
+#define to_ide_device(dev)container_of(dev, ide_drive_t, gendev)
+
#define IDE_CHIPSET_PCI_MASK \
((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
#define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
@@ -1086,28 +1087,20 @@
*/
typedef struct ide_driver_s {
struct module *owner;
- const char *name;
const char *version;
u8 media;
- unsigned busy : 1;
unsigned supports_dsc_overlap : 1;
- int (*cleanup)(ide_drive_t *);
ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
int (*end_request)(ide_drive_t *, int, int);
ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
ide_startstop_t (*abort)(ide_drive_t *, struct request *rq);
int (*ioctl)(ide_drive_t *, struct inode *, struct file *, unsigned int, unsigned long);
ide_proc_entry_t *proc;
- int (*attach)(ide_drive_t *);
void (*ata_prebuilder)(ide_drive_t *);
void (*atapi_prebuilder)(ide_drive_t *);
struct device_driver gen_driver;
- struct list_head drives;
- struct list_head drivers;
} ide_driver_t;
-#define DRIVER(drive) ((drive)->driver)
-
int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
/*
@@ -1328,8 +1321,6 @@
void ide_init_disk(struct gendisk *, ide_drive_t *);
-extern int ata_attach(ide_drive_t *);
-
extern int ideprobe_init(void);
extern void ide_scan_pcibus(int scan_direction) __init;
@@ -1342,11 +1333,8 @@
extern void default_hwif_mmiops(ide_hwif_t *);
extern void default_hwif_transport(ide_hwif_t *);
-int ide_register_driver(ide_driver_t *driver);
-void ide_unregister_driver(ide_driver_t *driver);
-int ide_register_subdriver(ide_drive_t *, ide_driver_t *);
-int ide_unregister_subdriver (ide_drive_t *drive);
-int ide_replace_subdriver(ide_drive_t *drive, const char *driver);
+void ide_register_subdriver(ide_drive_t *, ide_driver_t *);
+void ide_unregister_subdriver(ide_drive_t *, ide_driver_t *);
#define ON_BOARD 1
#define NEVER_BOARD 0
diff --git a/include/linux/if_shaper.h b/include/linux/if_shaper.h
index 0485b25..004e6f0 100644
--- a/include/linux/if_shaper.h
+++ b/include/linux/if_shaper.h
@@ -23,7 +23,7 @@
__u32 shapeclock;
unsigned long recovery; /* Time we can next clock a packet out on
an empty queue */
- unsigned long locked;
+ struct semaphore sem;
struct net_device_stats stats;
struct net_device *dev;
int (*hard_start_xmit) (struct sk_buff *skb,
@@ -38,7 +38,6 @@
int (*hard_header_cache)(struct neighbour *neigh, struct hh_cache *hh);
void (*header_cache_update)(struct hh_cache *hh, struct net_device *dev, unsigned char * haddr);
struct net_device_stats* (*get_stats)(struct net_device *dev);
- wait_queue_head_t wait_queue;
struct timer_list timer;
};
diff --git a/include/linux/if_tr.h b/include/linux/if_tr.h
index 4fd451f..6688b41 100644
--- a/include/linux/if_tr.h
+++ b/include/linux/if_tr.h
@@ -9,7 +9,7 @@
*
* Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
* Donald Becker, <becker@super.org>
- * Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
+ * Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -19,24 +19,16 @@
#ifndef _LINUX_IF_TR_H
#define _LINUX_IF_TR_H
-
/* IEEE 802.5 Token-Ring magic constants. The frame sizes omit the preamble
and FCS/CRC (frame check sequence). */
-#define TR_ALEN 6 /* Octets in one ethernet addr */
-#define TR_HLEN (sizeof(struct trh_hdr)+sizeof(struct trllc))
-#define AC 0x10
-#define LLC_FRAME 0x40
-#if 0
-#define ETH_HLEN 14 /* Total octets in header. */
-#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
-#define ETH_DATA_LEN 1500 /* Max. octets in payload */
-#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
-#endif
-
+#define TR_ALEN 6 /* Octets in one token-ring addr */
+#define TR_HLEN (sizeof(struct trh_hdr)+sizeof(struct trllc))
+#define AC 0x10
+#define LLC_FRAME 0x40
/* LLC and SNAP constants */
-#define EXTENDED_SAP 0xAA
-#define UI_CMD 0x03
+#define EXTENDED_SAP 0xAA
+#define UI_CMD 0x03
/* This is an Token-Ring frame header. */
struct trh_hdr {
@@ -44,8 +36,8 @@
__u8 fc; /* frame control field */
__u8 daddr[TR_ALEN]; /* destination address */
__u8 saddr[TR_ALEN]; /* source address */
- __u16 rcf; /* route control field */
- __u16 rseg[8]; /* routing registers */
+ __be16 rcf; /* route control field */
+ __be16 rseg[8]; /* routing registers */
};
#ifdef __KERNEL__
@@ -63,7 +55,7 @@
__u8 ssap; /* source SAP */
__u8 llc; /* LLC control field */
__u8 protid[3]; /* protocol id */
- __u16 ethertype; /* ether type field */
+ __be16 ethertype; /* ether type field */
};
/* Token-Ring statistics collection data. */
@@ -96,14 +88,13 @@
};
/* source routing stuff */
-
-#define TR_RII 0x80
-#define TR_RCF_DIR_BIT 0x80
-#define TR_RCF_LEN_MASK 0x1f00
-#define TR_RCF_BROADCAST 0x8000 /* all-routes broadcast */
-#define TR_RCF_LIMITED_BROADCAST 0xC000 /* single-route broadcast */
-#define TR_RCF_FRAME2K 0x20
-#define TR_RCF_BROADCAST_MASK 0xC000
-#define TR_MAXRIFLEN 18
+#define TR_RII 0x80
+#define TR_RCF_DIR_BIT 0x80
+#define TR_RCF_LEN_MASK 0x1f00
+#define TR_RCF_BROADCAST 0x8000 /* all-routes broadcast */
+#define TR_RCF_LIMITED_BROADCAST 0xC000 /* single-route broadcast */
+#define TR_RCF_FRAME2K 0x20
+#define TR_RCF_BROADCAST_MASK 0xC000
+#define TR_MAXRIFLEN 18
#endif /* _LINUX_IF_TR_H */
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index 6fafb27..7e1e15f 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -29,6 +29,7 @@
int no_xfrm;
int no_policy;
int force_igmp_version;
+ int promote_secondaries;
void *sysctl;
};
@@ -71,6 +72,7 @@
#define IN_DEV_SEC_REDIRECTS(in_dev) (ipv4_devconf.secure_redirects || (in_dev)->cnf.secure_redirects)
#define IN_DEV_IDTAG(in_dev) ((in_dev)->cnf.tag)
#define IN_DEV_MEDIUM_ID(in_dev) ((in_dev)->cnf.medium_id)
+#define IN_DEV_PROMOTE_SECONDARIES(in_dev) (ipv4_devconf.promote_secondaries || (in_dev)->cnf.promote_secondaries)
#define IN_DEV_RX_REDIRECTS(in_dev) \
((IN_DEV_FORWARD(in_dev) && \
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 505160a..b009f80 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -410,6 +410,7 @@
extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf);
extern int ata_port_start (struct ata_port *ap);
extern void ata_port_stop (struct ata_port *ap);
+extern void ata_host_stop (struct ata_host_set *host_set);
extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
extern void ata_qc_prep(struct ata_queued_cmd *qc);
extern int ata_qc_issue_prot(struct ata_queued_cmd *qc);
@@ -466,12 +467,34 @@
return ap->ops->check_status(ap);
}
+
+/**
+ * ata_pause - Flush writes and pause 400 nanoseconds.
+ * @ap: Port to wait for.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
static inline void ata_pause(struct ata_port *ap)
{
ata_altstatus(ap);
ndelay(400);
}
+
+/**
+ * ata_busy_wait - Wait for a port status register
+ * @ap: Port to wait for.
+ *
+ * Waits up to max*10 microseconds for the selected bits in the port's
+ * status register to be cleared.
+ * Returns final value of status register.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits,
unsigned int max)
{
@@ -486,6 +509,18 @@
return status;
}
+
+/**
+ * ata_wait_idle - Wait for a port to be idle.
+ * @ap: Port to wait for.
+ *
+ * Waits up to 10ms for port's BUSY and DRQ signals to clear.
+ * Returns final value of status register.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
static inline u8 ata_wait_idle(struct ata_port *ap)
{
u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
@@ -524,6 +559,18 @@
tf->device = ATA_DEVICE_OBS | ATA_DEV1;
}
+
+/**
+ * ata_irq_on - Enable interrupts on a port.
+ * @ap: Port on which interrupts are enabled.
+ *
+ * Enable interrupts on a legacy IDE device using MMIO or PIO,
+ * wait for idle, clear any pending interrupts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
static inline u8 ata_irq_on(struct ata_port *ap)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
@@ -543,6 +590,18 @@
return tmp;
}
+
+/**
+ * ata_irq_ack - Acknowledge a device interrupt.
+ * @ap: Port on which interrupts are enabled.
+ *
+ * Wait up to 10 ms for legacy IDE device to become idle (BUSY
+ * or BUSY+DRQ clear). Obtain dma status and port status from
+ * device. Clear the interrupt. Return port status.
+ *
+ * LOCKING:
+ */
+
static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq)
{
unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
@@ -584,6 +643,13 @@
ap->ops->scr_write(ap, reg, val);
}
+static inline void scr_write_flush(struct ata_port *ap, unsigned int reg,
+ u32 val)
+{
+ ap->ops->scr_write(ap, reg, val);
+ (void) ap->ops->scr_read(ap, reg);
+}
+
static inline unsigned int sata_dev_present(struct ata_port *ap)
{
return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0;
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 20971fe..374b615 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -65,9 +65,13 @@
#define ADVERTISE_SLCT 0x001f /* Selector bits */
#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
+#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */
#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
+#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */
#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
+#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */
#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
+#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */
#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */
#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */
@@ -84,9 +88,13 @@
/* Link partner ability register. */
#define LPA_SLCT 0x001f /* Same as advertise selector */
#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
+#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */
#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
+#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */
#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
+#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */
#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
+#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/
#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */
#define LPA_PAUSE_CAP 0x0400 /* Can pause */
#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */
diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/protocol.h
index 7b904c5..8963428 100644
--- a/include/linux/mmc/protocol.h
+++ b/include/linux/mmc/protocol.h
@@ -195,6 +195,33 @@
#define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */
#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */
+/*
+ * Card Command Classes (CCC)
+ */
+#define CCC_BASIC (1<<0) /* (0) Basic protocol functions */
+ /* (CMD0,1,2,3,4,7,9,10,12,13,15) */
+#define CCC_STREAM_READ (1<<1) /* (1) Stream read commands */
+ /* (CMD11) */
+#define CCC_BLOCK_READ (1<<2) /* (2) Block read commands */
+ /* (CMD16,17,18) */
+#define CCC_STREAM_WRITE (1<<3) /* (3) Stream write commands */
+ /* (CMD20) */
+#define CCC_BLOCK_WRITE (1<<4) /* (4) Block write commands */
+ /* (CMD16,24,25,26,27) */
+#define CCC_ERASE (1<<5) /* (5) Ability to erase blocks */
+ /* (CMD32,33,34,35,36,37,38,39) */
+#define CCC_WRITE_PROT (1<<6) /* (6) Able to write protect blocks */
+ /* (CMD28,29,30) */
+#define CCC_LOCK_CARD (1<<7) /* (7) Able to lock down card */
+ /* (CMD16,CMD42) */
+#define CCC_APP_SPEC (1<<8) /* (8) Application specific */
+ /* (CMD55,56,57,ACMD*) */
+#define CCC_IO_MODE (1<<9) /* (9) I/O mode */
+ /* (CMD5,39,40,52,53) */
+#define CCC_SWITCH (1<<10) /* (10) High speed switch */
+ /* (CMD6,34,35,36,37,50) */
+ /* (11) Reserved */
+ /* (CMD?) */
/*
* CSD field definitions
diff --git a/include/linux/net.h b/include/linux/net.h
index 6d997ff..20cb226 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -101,7 +101,6 @@
* @sk: internal networking protocol agnostic socket representation
* @wait: wait queue for several uses
* @type: socket type (%SOCK_STREAM, etc)
- * @passcred: credentials (used only in Unix Sockets (aka PF_LOCAL))
*/
struct socket {
socket_state state;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index ac11d73..ba5d123 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -204,7 +204,7 @@
/* cached hardware header; allow for machine alignment needs. */
#define HH_DATA_MOD 16
#define HH_DATA_OFF(__len) \
- (HH_DATA_MOD - ((__len) & (HH_DATA_MOD - 1)))
+ (HH_DATA_MOD - (((__len - 1) & (HH_DATA_MOD - 1)) + 1))
#define HH_DATA_ALIGN(__len) \
(((__len)+(HH_DATA_MOD-1))&~(HH_DATA_MOD - 1))
unsigned long hh_data[HH_DATA_ALIGN(LL_MAX_HEADER) / sizeof(long)];
@@ -401,7 +401,7 @@
} reg_state;
/* Net device features */
- int features;
+ unsigned long features;
#define NETIF_F_SG 1 /* Scatter/gather IO. */
#define NETIF_F_IP_CSUM 2 /* Can checksum only TCP/UDP over IPv4. */
#define NETIF_F_NO_CSUM 4 /* Does not require checksum. F.e. loopack. */
@@ -503,7 +503,7 @@
#define SET_NETDEV_DEV(net, pdev) ((net)->class_dev.dev = (pdev))
struct packet_type {
- unsigned short type; /* This is really htons(ether_type). */
+ __be16 type; /* This is really htons(ether_type). */
struct net_device *dev; /* NULL is wildcarded here */
int (*func) (struct sk_buff *, struct net_device *,
struct packet_type *);
@@ -913,6 +913,7 @@
extern void dev_set_promiscuity(struct net_device *dev, int inc);
extern void dev_set_allmulti(struct net_device *dev, int inc);
extern void netdev_state_change(struct net_device *dev);
+extern void netdev_features_change(struct net_device *dev);
/* Load a device via the kmod */
extern void dev_load(const char *name);
extern void dev_mcast_init(void);
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index 9303a00..5937dd60 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -56,6 +56,7 @@
#define NETDEV_CHANGEADDR 0x0008
#define NETDEV_GOING_DOWN 0x0009
#define NETDEV_CHANGENAME 0x000A
+#define NETDEV_FEAT_CHANGE 0x000B
#define SYS_DOWN 0x0001 /* Notify of system down */
#define SYS_RESTART SYS_DOWN
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ae27792..b0d6134 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1230,6 +1230,12 @@
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL 0x0258
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL 0x0259
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL 0x025B
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE 0x0265
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA 0x0266
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2 0x0267
+#define PCI_DEVICE_ID_NVIDIA_NVENET_12 0x0268
+#define PCI_DEVICE_ID_NVIDIA_NVENET_13 0x0269
+#define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO 0x026B
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800 0x0280
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X 0x0281
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE 0x0282
@@ -2064,12 +2070,14 @@
#define PCI_VENDOR_ID_BROADCOM 0x14e4
#define PCI_DEVICE_ID_TIGON3_5752 0x1600
+#define PCI_DEVICE_ID_TIGON3_5752M 0x1601
#define PCI_DEVICE_ID_TIGON3_5700 0x1644
#define PCI_DEVICE_ID_TIGON3_5701 0x1645
#define PCI_DEVICE_ID_TIGON3_5702 0x1646
#define PCI_DEVICE_ID_TIGON3_5703 0x1647
#define PCI_DEVICE_ID_TIGON3_5704 0x1648
#define PCI_DEVICE_ID_TIGON3_5704S_2 0x1649
+#define PCI_DEVICE_ID_NX2_5706 0x164a
#define PCI_DEVICE_ID_TIGON3_5702FE 0x164d
#define PCI_DEVICE_ID_TIGON3_5705 0x1653
#define PCI_DEVICE_ID_TIGON3_5705_2 0x1654
@@ -2089,6 +2097,7 @@
#define PCI_DEVICE_ID_TIGON3_5702X 0x16a6
#define PCI_DEVICE_ID_TIGON3_5703X 0x16a7
#define PCI_DEVICE_ID_TIGON3_5704S 0x16a8
+#define PCI_DEVICE_ID_NX2_5706S 0x16aa
#define PCI_DEVICE_ID_TIGON3_5702A3 0x16c6
#define PCI_DEVICE_ID_TIGON3_5703A3 0x16c7
#define PCI_DEVICE_ID_TIGON3_5781 0x16dd
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index 73d84c0..1d9da36 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -427,6 +427,7 @@
TCA_NETEM_UNSPEC,
TCA_NETEM_CORR,
TCA_NETEM_DELAY_DIST,
+ TCA_NETEM_REORDER,
__TCA_NETEM_MAX,
};
@@ -437,7 +438,7 @@
__u32 latency; /* added delay (us) */
__u32 limit; /* fifo limit (packets) */
__u32 loss; /* random packet loss (0=none ~0=100%) */
- __u32 gap; /* re-ordering gap (0 for delay all) */
+ __u32 gap; /* re-ordering gap (0 for none) */
__u32 duplicate; /* random packet dup (0=none ~0=100%) */
__u32 jitter; /* random jitter in latency (us) */
};
@@ -449,6 +450,12 @@
__u32 dup_corr; /* duplicate correlation */
};
+struct tc_netem_reorder
+{
+ __u32 probability;
+ __u32 correlation;
+};
+
#define NETEM_DIST_SCALE 8192
#endif
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index c3fb598..d6025af 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -479,6 +479,25 @@
}
}
+#include <linux/tty_flip.h>
+
+static inline void
+uart_insert_char(struct uart_port *port, unsigned int status,
+ unsigned int overrun, unsigned int ch, unsigned int flag)
+{
+ struct tty_struct *tty = port->info->tty;
+
+ if ((status & port->ignore_status_mask & ~overrun) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+
+ /*
+ * Overrun is special. Since it's reported immediately,
+ * it doesn't affect the current character.
+ */
+ if (status & ~port->ignore_status_mask & overrun)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+}
+
/*
* UART_ENABLE_MS - determine if port should enable modem status irqs
*/
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index e895f3e..d6ba068 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -248,7 +248,7 @@
#define _spin_trylock_bh(lock) ({preempt_disable(); local_bh_disable(); \
_raw_spin_trylock(lock) ? \
- 1 : ({preempt_enable(); local_bh_enable(); 0;});})
+ 1 : ({preempt_enable_no_resched(); local_bh_enable(); 0;});})
#define _spin_lock(lock) \
do { \
@@ -383,7 +383,7 @@
#define _spin_unlock_bh(lock) \
do { \
_raw_spin_unlock(lock); \
- preempt_enable(); \
+ preempt_enable_no_resched(); \
local_bh_enable(); \
__release(lock); \
} while (0)
@@ -391,7 +391,7 @@
#define _write_unlock_bh(lock) \
do { \
_raw_write_unlock(lock); \
- preempt_enable(); \
+ preempt_enable_no_resched(); \
local_bh_enable(); \
__release(lock); \
} while (0)
@@ -423,8 +423,8 @@
#define _read_unlock_bh(lock) \
do { \
_raw_read_unlock(lock); \
+ preempt_enable_no_resched(); \
local_bh_enable(); \
- preempt_enable(); \
__release(lock); \
} while (0)
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 7729981..23032d9 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -399,6 +399,7 @@
NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
NET_IPV4_CONF_ARP_ANNOUNCE=18,
NET_IPV4_CONF_ARP_IGNORE=19,
+ NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
__NET_IPV4_CONF_MAX
};
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 41d1a64..2d1ac50 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -796,6 +796,10 @@
* of the iso_frame_desc array, and the number of errors is reported in
* error_count. Completion callbacks for ISO transfers will normally
* (re)submit URBs to ensure a constant transfer rate.
+ *
+ * Note that even fields marked "public" should not be touched by the driver
+ * when the urb is owned by the hcd, that is, since the call to
+ * usb_submit_urb() till the entry into the completion routine.
*/
struct urb
{
@@ -803,12 +807,12 @@
struct kref kref; /* reference count of the URB */
spinlock_t lock; /* lock for the URB */
void *hcpriv; /* private data for host controller */
- struct list_head urb_list; /* list pointer to all active urbs */
int bandwidth; /* bandwidth for INT/ISO request */
atomic_t use_count; /* concurrent submissions counter */
u8 reject; /* submissions will fail */
/* public, documented fields in the urb that can be used by drivers */
+ struct list_head urb_list; /* list head for use by the urb owner */
struct usb_device *dev; /* (in) pointer to associated device */
unsigned int pipe; /* (in) pipe information */
int status; /* (return) non-ISO status */
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 3a358c8..6409d9c 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -41,6 +41,7 @@
extern struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
unsigned long start, unsigned long end);
extern struct vm_struct *remove_vm_area(void *addr);
+extern struct vm_struct *__remove_vm_area(void *addr);
extern int map_vm_area(struct vm_struct *area, pgprot_t prot,
struct page ***pages);
extern void unmap_vm_area(struct vm_struct *area);
diff --git a/include/linux/wait.h b/include/linux/wait.h
index 17c874a..c9486c3 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -386,9 +386,7 @@
wait_queue_t name = { \
.task = current, \
.func = autoremove_wake_function, \
- .task_list = { .next = &(name).task_list, \
- .prev = &(name).task_list, \
- }, \
+ .task_list = LIST_HEAD_INIT((name).task_list), \
}
#define DEFINE_WAIT_BIT(name, word, bit) \
diff --git a/include/media/video-buf-dvb.h b/include/media/video-buf-dvb.h
index 94bd336..ad0a07a 100644
--- a/include/media/video-buf-dvb.h
+++ b/include/media/video-buf-dvb.h
@@ -16,7 +16,7 @@
int nfeeds;
/* videobuf_dvb_(un)register manges this */
- struct dvb_adapter *adapter;
+ struct dvb_adapter adapter;
struct dvb_demux demux;
struct dmxdev dmxdev;
struct dmx_frontend fe_hw;
diff --git a/include/net/act_generic.h b/include/net/act_generic.h
index 95b1207..c9daa7e 100644
--- a/include/net/act_generic.h
+++ b/include/net/act_generic.h
@@ -2,8 +2,8 @@
* include/net/act_generic.h
*
*/
-#ifndef ACT_GENERIC_H
-#define ACT_GENERIC_H
+#ifndef _NET_ACT_GENERIC_H
+#define _NET_ACT_GENERIC_H
static inline int tcf_defact_release(struct tcf_defact *p, int bind)
{
int ret = 0;
diff --git a/include/net/route.h b/include/net/route.h
index efe92b2..d34ca8f 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -181,9 +181,6 @@
memcpy(&fl, &(*rp)->fl, sizeof(fl));
fl.fl_ip_sport = sport;
fl.fl_ip_dport = dport;
-#if defined(CONFIG_IP_ROUTE_MULTIPATH_CACHED)
- fl.flags |= FLOWI_FLAG_MULTIPATHOLDROUTE;
-#endif
ip_rt_put(*rp);
*rp = NULL;
return ip_route_output_flow(rp, &fl, sk, 0);
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index e142a25..d675836 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -515,6 +515,8 @@
struct dst_entry *route;
u32 route_mtu_cached;
u32 child_mtu_cached;
+ u32 route_cookie;
+ u32 path_cookie;
};
static inline void xfrm_dst_destroy(struct xfrm_dst *xdst)
diff --git a/include/scsi/scsi_transport_spi.h b/include/scsi/scsi_transport_spi.h
index 6dcf497..a30d6cd 100644
--- a/include/scsi/scsi_transport_spi.h
+++ b/include/scsi/scsi_transport_spi.h
@@ -27,8 +27,11 @@
struct spi_transport_attrs {
int period; /* value in the PPR/SDTR command */
+ int min_period;
int offset;
+ int max_offset;
unsigned int width:1; /* 0 - narrow, 1 - wide */
+ unsigned int max_width:1;
unsigned int iu:1; /* Information Units enabled */
unsigned int dt:1; /* DT clocking enabled */
unsigned int qas:1; /* Quick Arbitration and Selection enabled */
@@ -63,8 +66,11 @@
/* accessor functions */
#define spi_period(x) (((struct spi_transport_attrs *)&(x)->starget_data)->period)
+#define spi_min_period(x) (((struct spi_transport_attrs *)&(x)->starget_data)->min_period)
#define spi_offset(x) (((struct spi_transport_attrs *)&(x)->starget_data)->offset)
+#define spi_max_offset(x) (((struct spi_transport_attrs *)&(x)->starget_data)->max_offset)
#define spi_width(x) (((struct spi_transport_attrs *)&(x)->starget_data)->width)
+#define spi_max_width(x) (((struct spi_transport_attrs *)&(x)->starget_data)->max_width)
#define spi_iu(x) (((struct spi_transport_attrs *)&(x)->starget_data)->iu)
#define spi_dt(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dt)
#define spi_qas(x) (((struct spi_transport_attrs *)&(x)->starget_data)->qas)
diff --git a/init/Kconfig b/init/Kconfig
index d920bae..a7660cc 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -442,7 +442,7 @@
config MODVERSIONS
bool "Module versioning support (EXPERIMENTAL)"
- depends on MODULES && EXPERIMENTAL && !UML
+ depends on MODULES && EXPERIMENTAL
help
Usually, you have to use modules compiled with your kernel.
Saying Y here makes it sometimes possible to use modules
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 961d740..00e8f25 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -166,9 +166,8 @@
* The hooks from fork and exit, cpuset_fork() and cpuset_exit(), don't
* (usually) grab cpuset_sem. These are the two most performance
* critical pieces of code here. The exception occurs on exit(),
- * if the last task using a cpuset exits, and the cpuset was marked
- * notify_on_release. In that case, the cpuset_sem is taken, the
- * path to the released cpuset calculated, and a usermode call made
+ * when a task in a notify_on_release cpuset exits. Then cpuset_sem
+ * is taken, and if the cpuset count is zero, a usermode call made
* to /sbin/cpuset_release_agent with the name of the cpuset (path
* relative to the root of cpuset file system) as the argument.
*
@@ -1404,6 +1403,18 @@
*
* Description: Detach cpuset from @tsk and release it.
*
+ * Note that cpusets marked notify_on_release force every task
+ * in them to take the global cpuset_sem semaphore when exiting.
+ * This could impact scaling on very large systems. Be reluctant
+ * to use notify_on_release cpusets where very high task exit
+ * scaling is required on large systems.
+ *
+ * Don't even think about derefencing 'cs' after the cpuset use
+ * count goes to zero, except inside a critical section guarded
+ * by the cpuset_sem semaphore. If you don't hold cpuset_sem,
+ * then a zero cpuset use count is a license to any other task to
+ * nuke the cpuset immediately.
+ *
**/
void cpuset_exit(struct task_struct *tsk)
@@ -1415,10 +1426,13 @@
tsk->cpuset = NULL;
task_unlock(tsk);
- if (atomic_dec_and_test(&cs->count)) {
+ if (notify_on_release(cs)) {
down(&cpuset_sem);
- check_for_release(cs);
+ if (atomic_dec_and_test(&cs->count))
+ check_for_release(cs);
up(&cpuset_sem);
+ } else {
+ atomic_dec(&cs->count);
}
}
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 2fb0e46..436c7d9 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -30,6 +30,7 @@
*/
irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = {
[0 ... NR_IRQS-1] = {
+ .status = IRQ_DISABLED,
.handler = &no_irq_type,
.lock = SPIN_LOCK_UNLOCKED
}
@@ -118,8 +119,6 @@
*/
desc->handler->ack(irq);
action_ret = handle_IRQ_event(irq, regs, desc->action);
- if (!noirqdebug)
- note_interrupt(irq, desc, action_ret);
desc->handler->end(irq);
return 1;
}
diff --git a/kernel/module.c b/kernel/module.c
index 5734ab0..83b3d37 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1758,6 +1758,7 @@
const char __user *uargs)
{
struct module *mod;
+ mm_segment_t old_fs = get_fs();
int ret = 0;
/* Must have permission */
@@ -1775,6 +1776,9 @@
return PTR_ERR(mod);
}
+ /* flush the icache in correct context */
+ set_fs(KERNEL_DS);
+
/* Flush the instruction cache, since we've played with text */
if (mod->module_init)
flush_icache_range((unsigned long)mod->module_init,
@@ -1783,6 +1787,8 @@
flush_icache_range((unsigned long)mod->module_core,
(unsigned long)mod->module_core + mod->core_size);
+ set_fs(old_fs);
+
/* Now sew it into the lists. They won't access us, since
strong_try_module_get() will fail. */
stop_machine_run(__link_module, mod, NR_CPUS);
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 7960ddf..4cdebc9 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -156,14 +156,14 @@
goto Unlock;
}
- pr_debug("PM: Preparing system for suspend\n");
+ pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
if ((error = suspend_prepare(state)))
goto Unlock;
- pr_debug("PM: Entering state.\n");
+ pr_debug("PM: Entering %s sleep\n", pm_states[state]);
error = suspend_enter(state);
- pr_debug("PM: Finishing up.\n");
+ pr_debug("PM: Finishing wakeup.\n");
suspend_finish(state);
Unlock:
up(&pm_sem);
diff --git a/kernel/printk.c b/kernel/printk.c
index 290a07c..01b58d7 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -160,42 +160,6 @@
__setup("console=", console_setup);
-/**
- * add_preferred_console - add a device to the list of preferred consoles.
- *
- * The last preferred console added will be used for kernel messages
- * and stdin/out/err for init. Normally this is used by console_setup
- * above to handle user-supplied console arguments; however it can also
- * be used by arch-specific code either to override the user or more
- * commonly to provide a default console (ie from PROM variables) when
- * the user has not supplied one.
- */
-int __init add_preferred_console(char *name, int idx, char *options)
-{
- struct console_cmdline *c;
- int i;
-
- /*
- * See if this tty is not yet registered, and
- * if we have a slot free.
- */
- for(i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++)
- if (strcmp(console_cmdline[i].name, name) == 0 &&
- console_cmdline[i].index == idx) {
- selected_console = i;
- return 0;
- }
- if (i == MAX_CMDLINECONSOLES)
- return -E2BIG;
- selected_console = i;
- c = &console_cmdline[i];
- memcpy(c->name, name, sizeof(c->name));
- c->name[sizeof(c->name) - 1] = 0;
- c->options = options;
- c->index = idx;
- return 0;
-}
-
static int __init log_buf_len_setup(char *str)
{
unsigned long size = memparse(str, &str);
@@ -671,6 +635,42 @@
#endif
/**
+ * add_preferred_console - add a device to the list of preferred consoles.
+ *
+ * The last preferred console added will be used for kernel messages
+ * and stdin/out/err for init. Normally this is used by console_setup
+ * above to handle user-supplied console arguments; however it can also
+ * be used by arch-specific code either to override the user or more
+ * commonly to provide a default console (ie from PROM variables) when
+ * the user has not supplied one.
+ */
+int __init add_preferred_console(char *name, int idx, char *options)
+{
+ struct console_cmdline *c;
+ int i;
+
+ /*
+ * See if this tty is not yet registered, and
+ * if we have a slot free.
+ */
+ for(i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++)
+ if (strcmp(console_cmdline[i].name, name) == 0 &&
+ console_cmdline[i].index == idx) {
+ selected_console = i;
+ return 0;
+ }
+ if (i == MAX_CMDLINECONSOLES)
+ return -E2BIG;
+ selected_console = i;
+ c = &console_cmdline[i];
+ memcpy(c->name, name, sizeof(c->name));
+ c->name[sizeof(c->name) - 1] = 0;
+ c->options = options;
+ c->index = idx;
+ return 0;
+}
+
+/**
* acquire_console_sem - lock the console system for exclusive use.
*
* Acquires a semaphore which guarantees that the caller has
diff --git a/kernel/profile.c b/kernel/profile.c
index 0221a50..ad8cbb7 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -49,15 +49,19 @@
static int __init profile_setup(char * str)
{
+ static char __initdata schedstr[] = "schedule";
int par;
- if (!strncmp(str, "schedule", 8)) {
+ if (!strncmp(str, schedstr, strlen(schedstr))) {
prof_on = SCHED_PROFILING;
- printk(KERN_INFO "kernel schedule profiling enabled\n");
- if (str[7] == ',')
- str += 8;
- }
- if (get_option(&str,&par)) {
+ if (str[strlen(schedstr)] == ',')
+ str += strlen(schedstr) + 1;
+ if (get_option(&str, &par))
+ prof_shift = par;
+ printk(KERN_INFO
+ "kernel schedule profiling enabled (shift: %ld)\n",
+ prof_shift);
+ } else if (get_option(&str, &par)) {
prof_shift = par;
prof_on = CPU_PROFILING;
printk(KERN_INFO "kernel profiling enabled (shift: %ld)\n",
diff --git a/kernel/sched.c b/kernel/sched.c
index 0dc3158..66b2ed7 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4243,7 +4243,7 @@
/* No more Mr. Nice Guy. */
if (dest_cpu == NR_CPUS) {
- tsk->cpus_allowed = cpuset_cpus_allowed(tsk);
+ cpus_setall(tsk->cpus_allowed);
dest_cpu = any_online_cpu(tsk->cpus_allowed);
/*
diff --git a/kernel/signal.c b/kernel/signal.c
index 8f3debc..b3c24c7 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -522,7 +522,16 @@
{
int sig = 0;
- sig = next_signal(pending, mask);
+ /* SIGKILL must have priority, otherwise it is quite easy
+ * to create an unkillable process, sending sig < SIGKILL
+ * to self */
+ if (unlikely(sigismember(&pending->signal, SIGKILL))) {
+ if (!sigismember(mask, SIGKILL))
+ sig = SIGKILL;
+ }
+
+ if (likely(!sig))
+ sig = next_signal(pending, mask);
if (sig) {
if (current->notifier) {
if (sigismember(current->notifier_mask, sig)) {
diff --git a/kernel/spinlock.c b/kernel/spinlock.c
index e15ed17..0c3f9d8 100644
--- a/kernel/spinlock.c
+++ b/kernel/spinlock.c
@@ -294,7 +294,7 @@
void __lockfunc _spin_unlock_bh(spinlock_t *lock)
{
_raw_spin_unlock(lock);
- preempt_enable();
+ preempt_enable_no_resched();
local_bh_enable();
}
EXPORT_SYMBOL(_spin_unlock_bh);
@@ -318,7 +318,7 @@
void __lockfunc _read_unlock_bh(rwlock_t *lock)
{
_raw_read_unlock(lock);
- preempt_enable();
+ preempt_enable_no_resched();
local_bh_enable();
}
EXPORT_SYMBOL(_read_unlock_bh);
@@ -342,7 +342,7 @@
void __lockfunc _write_unlock_bh(rwlock_t *lock)
{
_raw_write_unlock(lock);
- preempt_enable();
+ preempt_enable_no_resched();
local_bh_enable();
}
EXPORT_SYMBOL(_write_unlock_bh);
@@ -354,7 +354,7 @@
if (_raw_spin_trylock(lock))
return 1;
- preempt_enable();
+ preempt_enable_no_resched();
local_bh_enable();
return 0;
}
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index ac23847..0c42129 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -151,7 +151,8 @@
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && ((X86 && !X86_64) || CRIS || M68K || M68KNOMMU || FRV)
+ depends on DEBUG_KERNEL && ((X86 && !X86_64) || CRIS || M68K || M68KNOMMU || FRV || UML)
+ default y if DEBUG_INFO && UML
help
If you say Y here the resulting kernel image will be slightly larger
and slower, but it will give very useful debugging information.
diff --git a/mm/filemap.c b/mm/filemap.c
index 47263ac..1d33fec 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1004,7 +1004,7 @@
if (pos < size) {
retval = generic_file_direct_IO(READ, iocb,
iov, pos, nr_segs);
- if (retval >= 0 && !is_sync_kiocb(iocb))
+ if (retval > 0 && !is_sync_kiocb(iocb))
retval = -EIOCBQUEUED;
if (retval > 0)
*ppos = pos + retval;
diff --git a/mm/memory.c b/mm/memory.c
index 6bad4c4..d209f74 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1701,12 +1701,13 @@
spin_lock(&mm->page_table_lock);
page_table = pte_offset_map(pmd, address);
if (unlikely(!pte_same(*page_table, orig_pte))) {
- pte_unmap(page_table);
- spin_unlock(&mm->page_table_lock);
- unlock_page(page);
- page_cache_release(page);
ret = VM_FAULT_MINOR;
- goto out;
+ goto out_nomap;
+ }
+
+ if (unlikely(!PageUptodate(page))) {
+ ret = VM_FAULT_SIGBUS;
+ goto out_nomap;
}
/* The page isn't present yet, go ahead with the fault. */
@@ -1741,6 +1742,12 @@
spin_unlock(&mm->page_table_lock);
out:
return ret;
+out_nomap:
+ pte_unmap(page_table);
+ spin_unlock(&mm->page_table_lock);
+ unlock_page(page);
+ page_cache_release(page);
+ goto out;
}
/*
diff --git a/mm/mmap.c b/mm/mmap.c
index 01f9793..de54acd 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1244,7 +1244,7 @@
addr = mm->free_area_cache;
/* make sure it can fit in the remaining address space */
- if (addr >= len) {
+ if (addr > len) {
vma = find_vma(mm, addr-len);
if (!vma || addr <= vma->vm_start)
/* remember the address as a hint for next time */
@@ -1266,7 +1266,7 @@
/* try just below the current vma->vm_start */
addr = vma->vm_start-len;
- } while (len <= vma->vm_start);
+ } while (len < vma->vm_start);
/*
* A failed mmap() very likely causes application failure,
@@ -1302,37 +1302,40 @@
get_unmapped_area(struct file *file, unsigned long addr, unsigned long len,
unsigned long pgoff, unsigned long flags)
{
- if (flags & MAP_FIXED) {
- unsigned long ret;
+ unsigned long ret;
- if (addr > TASK_SIZE - len)
- return -ENOMEM;
- if (addr & ~PAGE_MASK)
- return -EINVAL;
- if (file && is_file_hugepages(file)) {
- /*
- * Check if the given range is hugepage aligned, and
- * can be made suitable for hugepages.
- */
- ret = prepare_hugepage_range(addr, len);
- } else {
- /*
- * Ensure that a normal request is not falling in a
- * reserved hugepage range. For some archs like IA-64,
- * there is a separate region for hugepages.
- */
- ret = is_hugepage_only_range(current->mm, addr, len);
- }
- if (ret)
- return -EINVAL;
- return addr;
+ if (!(flags & MAP_FIXED)) {
+ unsigned long (*get_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
+
+ get_area = current->mm->get_unmapped_area;
+ if (file && file->f_op && file->f_op->get_unmapped_area)
+ get_area = file->f_op->get_unmapped_area;
+ addr = get_area(file, addr, len, pgoff, flags);
+ if (IS_ERR_VALUE(addr))
+ return addr;
}
- if (file && file->f_op && file->f_op->get_unmapped_area)
- return file->f_op->get_unmapped_area(file, addr, len,
- pgoff, flags);
-
- return current->mm->get_unmapped_area(file, addr, len, pgoff, flags);
+ if (addr > TASK_SIZE - len)
+ return -ENOMEM;
+ if (addr & ~PAGE_MASK)
+ return -EINVAL;
+ if (file && is_file_hugepages(file)) {
+ /*
+ * Check if the given range is hugepage aligned, and
+ * can be made suitable for hugepages.
+ */
+ ret = prepare_hugepage_range(addr, len);
+ } else {
+ /*
+ * Ensure that a normal request is not falling in a
+ * reserved hugepage range. For some archs like IA-64,
+ * there is a separate region for hugepages.
+ */
+ ret = is_hugepage_only_range(current->mm, addr, len);
+ }
+ if (ret)
+ return -EINVAL;
+ return addr;
}
EXPORT_SYMBOL(get_unmapped_area);
diff --git a/mm/mremap.c b/mm/mremap.c
index 0dd7ace..ec7238a 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -224,6 +224,12 @@
split = 1;
}
+ /*
+ * if we failed to move page tables we still do total_vm increment
+ * since do_munmap() will decrement it by old_len == new_len
+ */
+ mm->total_vm += new_len >> PAGE_SHIFT;
+
if (do_munmap(mm, old_addr, old_len) < 0) {
/* OOM: unable to split vma, just get accounts right */
vm_unacct_memory(excess >> PAGE_SHIFT);
@@ -237,7 +243,6 @@
vma->vm_next->vm_flags |= VM_ACCOUNT;
}
- mm->total_vm += new_len >> PAGE_SHIFT;
__vm_stat_account(mm, vma->vm_flags, vma->vm_file, new_len>>PAGE_SHIFT);
if (vm_flags & VM_LOCKED) {
mm->locked_vm += new_len >> PAGE_SHIFT;
diff --git a/mm/nommu.c b/mm/nommu.c
index b293ec1..c53e9c8 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -150,7 +150,8 @@
kfree(addr);
}
-void *__vmalloc(unsigned long size, int gfp_mask, pgprot_t prot)
+void *__vmalloc(unsigned long size, unsigned int __nocast gfp_mask,
+ pgprot_t prot)
{
/*
* kmalloc doesn't like __GFP_HIGHMEM for some reason
diff --git a/mm/rmap.c b/mm/rmap.c
index 378de23..9827409 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -586,7 +586,7 @@
dec_mm_counter(mm, anon_rss);
}
- inc_mm_counter(mm, rss);
+ dec_mm_counter(mm, rss);
page_remove_rmap(page);
page_cache_release(page);
@@ -626,7 +626,7 @@
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
- pte_t *pte;
+ pte_t *pte, *original_pte;
pte_t pteval;
struct page *page;
unsigned long address;
@@ -658,7 +658,7 @@
if (!pmd_present(*pmd))
goto out_unlock;
- for (pte = pte_offset_map(pmd, address);
+ for (original_pte = pte = pte_offset_map(pmd, address);
address < end; pte++, address += PAGE_SIZE) {
if (!pte_present(*pte))
@@ -694,7 +694,7 @@
(*mapcount)--;
}
- pte_unmap(pte);
+ pte_unmap(original_pte);
out_unlock:
spin_unlock(&mm->page_table_lock);
}
diff --git a/mm/swapfile.c b/mm/swapfile.c
index a60e007..da48405 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -79,7 +79,7 @@
WARN_ON(page_count(page) <= 1);
bdi = bdev->bd_inode->i_mapping->backing_dev_info;
- bdi->unplug_io_fn(bdi, page);
+ blk_run_backing_dev(bdi, page);
}
up_read(&swap_unplug_sem);
}
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 2bd83e5..8ff16a1 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -248,6 +248,28 @@
return __get_vm_area(size, flags, VMALLOC_START, VMALLOC_END);
}
+/* Caller must hold vmlist_lock */
+struct vm_struct *__remove_vm_area(void *addr)
+{
+ struct vm_struct **p, *tmp;
+
+ for (p = &vmlist ; (tmp = *p) != NULL ;p = &tmp->next) {
+ if (tmp->addr == addr)
+ goto found;
+ }
+ return NULL;
+
+found:
+ unmap_vm_area(tmp);
+ *p = tmp->next;
+
+ /*
+ * Remove the guard page.
+ */
+ tmp->size -= PAGE_SIZE;
+ return tmp;
+}
+
/**
* remove_vm_area - find and remove a contingous kernel virtual area
*
@@ -255,30 +277,15 @@
*
* Search for the kernel VM area starting at @addr, and remove it.
* This function returns the found VM area, but using it is NOT safe
- * on SMP machines.
+ * on SMP machines, except for its size or flags.
*/
struct vm_struct *remove_vm_area(void *addr)
{
- struct vm_struct **p, *tmp;
-
+ struct vm_struct *v;
write_lock(&vmlist_lock);
- for (p = &vmlist ; (tmp = *p) != NULL ;p = &tmp->next) {
- if (tmp->addr == addr)
- goto found;
- }
+ v = __remove_vm_area(addr);
write_unlock(&vmlist_lock);
- return NULL;
-
-found:
- unmap_vm_area(tmp);
- *p = tmp->next;
- write_unlock(&vmlist_lock);
-
- /*
- * Remove the guard page.
- */
- tmp->size -= PAGE_SIZE;
- return tmp;
+ return v;
}
void __vunmap(void *addr, int deallocate_pages)
diff --git a/net/802/tr.c b/net/802/tr.c
index 85293cc..a755e88 100644
--- a/net/802/tr.c
+++ b/net/802/tr.c
@@ -47,12 +47,12 @@
* Each RIF entry we learn is kept this way
*/
-struct rif_cache_s {
+struct rif_cache {
unsigned char addr[TR_ALEN];
int iface;
- __u16 rcf;
- __u16 rseg[8];
- struct rif_cache_s *next;
+ __be16 rcf;
+ __be16 rseg[8];
+ struct rif_cache *next;
unsigned long last_used;
unsigned char local_ring;
};
@@ -64,7 +64,7 @@
* up a lot.
*/
-static struct rif_cache_s *rif_table[RIF_TABLE_SIZE];
+static struct rif_cache *rif_table[RIF_TABLE_SIZE];
static DEFINE_SPINLOCK(rif_lock);
@@ -249,7 +249,7 @@
{
int slack;
unsigned int hash;
- struct rif_cache_s *entry;
+ struct rif_cache *entry;
unsigned char *olddata;
static const unsigned char mcast_func_addr[]
= {0xC0,0x00,0x00,0x04,0x00,0x00};
@@ -337,7 +337,7 @@
static void tr_add_rif_info(struct trh_hdr *trh, struct net_device *dev)
{
unsigned int hash, rii_p = 0;
- struct rif_cache_s *entry;
+ struct rif_cache *entry;
spin_lock_bh(&rif_lock);
@@ -373,7 +373,7 @@
* FIXME: We ought to keep some kind of cache size
* limiting and adjust the timers to suit.
*/
- entry=kmalloc(sizeof(struct rif_cache_s),GFP_ATOMIC);
+ entry=kmalloc(sizeof(struct rif_cache),GFP_ATOMIC);
if(!entry)
{
@@ -435,7 +435,7 @@
spin_lock_bh(&rif_lock);
for(i =0; i < RIF_TABLE_SIZE; i++) {
- struct rif_cache_s *entry, **pentry;
+ struct rif_cache *entry, **pentry;
pentry = rif_table+i;
while((entry=*pentry) != NULL) {
@@ -467,10 +467,10 @@
#ifdef CONFIG_PROC_FS
-static struct rif_cache_s *rif_get_idx(loff_t pos)
+static struct rif_cache *rif_get_idx(loff_t pos)
{
int i;
- struct rif_cache_s *entry;
+ struct rif_cache *entry;
loff_t off = 0;
for(i = 0; i < RIF_TABLE_SIZE; i++)
@@ -493,7 +493,7 @@
static void *rif_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
int i;
- struct rif_cache_s *ent = v;
+ struct rif_cache *ent = v;
++*pos;
@@ -522,7 +522,7 @@
static int rif_seq_show(struct seq_file *seq, void *v)
{
int j, rcf_len, segment, brdgnmb;
- struct rif_cache_s *entry = v;
+ struct rif_cache *entry = v;
if (v == SEQ_START_TOKEN)
seq_puts(seq,
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index d9b72fd..f564ee9 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -21,10 +21,7 @@
static struct net_device_stats *br_dev_get_stats(struct net_device *dev)
{
- struct net_bridge *br;
-
- br = dev->priv;
-
+ struct net_bridge *br = netdev_priv(dev);
return &br->statistics;
}
@@ -54,9 +51,11 @@
static int br_dev_open(struct net_device *dev)
{
- netif_start_queue(dev);
+ struct net_bridge *br = netdev_priv(dev);
- br_stp_enable_bridge(dev->priv);
+ br_features_recompute(br);
+ netif_start_queue(dev);
+ br_stp_enable_bridge(br);
return 0;
}
@@ -67,7 +66,7 @@
static int br_dev_stop(struct net_device *dev)
{
- br_stp_disable_bridge(dev->priv);
+ br_stp_disable_bridge(netdev_priv(dev));
netif_stop_queue(dev);
@@ -76,7 +75,7 @@
static int br_change_mtu(struct net_device *dev, int new_mtu)
{
- if ((new_mtu < 68) || new_mtu > br_min_mtu(dev->priv))
+ if (new_mtu < 68 || new_mtu > br_min_mtu(netdev_priv(dev)))
return -EINVAL;
dev->mtu = new_mtu;
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 69872bf..91bb895 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -314,6 +314,28 @@
return mtu;
}
+/*
+ * Recomputes features using slave's features
+ */
+void br_features_recompute(struct net_bridge *br)
+{
+ struct net_bridge_port *p;
+ unsigned long features, checksum;
+
+ features = NETIF_F_SG | NETIF_F_FRAGLIST
+ | NETIF_F_HIGHDMA | NETIF_F_TSO;
+ checksum = NETIF_F_IP_CSUM; /* least commmon subset */
+
+ list_for_each_entry(p, &br->port_list, list) {
+ if (!(p->dev->features
+ & (NETIF_F_IP_CSUM|NETIF_F_NO_CSUM|NETIF_F_HW_CSUM)))
+ checksum = 0;
+ features &= p->dev->features;
+ }
+
+ br->dev->features = features | checksum | NETIF_F_LLTX;
+}
+
/* called with RTNL */
int br_add_if(struct net_bridge *br, struct net_device *dev)
{
@@ -368,6 +390,7 @@
spin_lock_bh(&br->lock);
br_stp_recalculate_bridge_id(br);
+ br_features_recompute(br);
spin_unlock_bh(&br->lock);
return 0;
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index 2b1cce4..8f5f2e7 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -26,7 +26,7 @@
#ifdef CONFIG_NETFILTER_DEBUG
skb->nf_debug = 0;
#endif
- netif_rx(skb);
+ netif_receive_skb(skb);
return 0;
}
@@ -54,6 +54,9 @@
struct net_bridge_fdb_entry *dst;
int passedup = 0;
+ /* insert into forwarding database after filtering to avoid spoofing */
+ br_fdb_update(p->br, p, eth_hdr(skb)->h_source);
+
if (br->dev->flags & IFF_PROMISC) {
struct sk_buff *skb2;
@@ -108,8 +111,7 @@
if (!is_valid_ether_addr(eth_hdr(skb)->h_source))
goto err;
- if (p->state == BR_STATE_LEARNING ||
- p->state == BR_STATE_FORWARDING)
+ if (p->state == BR_STATE_LEARNING)
br_fdb_update(p->br, p, eth_hdr(skb)->h_source);
if (p->br->stp_enabled &&
diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c
index f8fb49e..917311c 100644
--- a/net/bridge/br_notify.c
+++ b/net/bridge/br_notify.c
@@ -65,6 +65,15 @@
}
break;
+ case NETDEV_FEAT_CHANGE:
+ if (br->dev->flags & IFF_UP)
+ br_features_recompute(br);
+
+ /* could do recursive feature change notification
+ * but who would care??
+ */
+ break;
+
case NETDEV_DOWN:
if (br->dev->flags & IFF_UP)
br_stp_disable_port(p);
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 54d63f13..bdf95a7 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -174,6 +174,7 @@
extern int br_del_if(struct net_bridge *br,
struct net_device *dev);
extern int br_min_mtu(const struct net_bridge *br);
+extern void br_features_recompute(struct net_bridge *br);
/* br_input.c */
extern int br_handle_frame_finish(struct sk_buff *skb);
diff --git a/net/bridge/br_stp_bpdu.c b/net/bridge/br_stp_bpdu.c
index b91a875..d071f1c 100644
--- a/net/bridge/br_stp_bpdu.c
+++ b/net/bridge/br_stp_bpdu.c
@@ -140,6 +140,9 @@
struct net_bridge *br = p->br;
unsigned char *buf;
+ /* insert into forwarding database after filtering to avoid spoofing */
+ br_fdb_update(p->br, p, eth_hdr(skb)->h_source);
+
/* need at least the 802 and STP headers */
if (!pskb_may_pull(skb, sizeof(header)+1) ||
memcmp(skb->data, header, sizeof(header)))
diff --git a/net/core/dev.c b/net/core/dev.c
index d4d9e26..f15a3ff 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -761,6 +761,18 @@
}
/**
+ * netdev_features_change - device changes fatures
+ * @dev: device to cause notification
+ *
+ * Called to indicate a device has changed features.
+ */
+void netdev_features_change(struct net_device *dev)
+{
+ notifier_call_chain(&netdev_chain, NETDEV_FEAT_CHANGE, dev);
+}
+EXPORT_SYMBOL(netdev_features_change);
+
+/**
* netdev_state_change - device changes state
* @dev: device to cause notification
*
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index f05fde9..8ec4848 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -29,7 +29,7 @@
u32 ethtool_op_get_tx_csum(struct net_device *dev)
{
- return (dev->features & NETIF_F_IP_CSUM) != 0;
+ return (dev->features & (NETIF_F_IP_CSUM | NETIF_F_HW_CSUM)) != 0;
}
int ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
@@ -42,6 +42,15 @@
return 0;
}
+int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data)
+{
+ if (data)
+ dev->features |= NETIF_F_HW_CSUM;
+ else
+ dev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
+}
u32 ethtool_op_get_sg(struct net_device *dev)
{
return (dev->features & NETIF_F_SG) != 0;
@@ -682,6 +691,7 @@
void __user *useraddr = ifr->ifr_data;
u32 ethcmd;
int rc;
+ unsigned long old_features;
/*
* XXX: This can be pushed down into the ethtool_* handlers that
@@ -703,6 +713,8 @@
if ((rc = dev->ethtool_ops->begin(dev)) < 0)
return rc;
+ old_features = dev->features;
+
switch (ethcmd) {
case ETHTOOL_GSET:
rc = ethtool_get_settings(dev, useraddr);
@@ -712,7 +724,6 @@
break;
case ETHTOOL_GDRVINFO:
rc = ethtool_get_drvinfo(dev, useraddr);
-
break;
case ETHTOOL_GREGS:
rc = ethtool_get_regs(dev, useraddr);
@@ -801,6 +812,10 @@
if(dev->ethtool_ops->complete)
dev->ethtool_ops->complete(dev);
+
+ if (old_features != dev->features)
+ netdev_features_change(dev);
+
return rc;
ioctl:
@@ -817,3 +832,4 @@
EXPORT_SYMBOL(ethtool_op_set_sg);
EXPORT_SYMBOL(ethtool_op_set_tso);
EXPORT_SYMBOL(ethtool_op_set_tx_csum);
+EXPORT_SYMBOL(ethtool_op_set_tx_hw_csum);
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 060f703..910eb4c 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -21,6 +21,7 @@
#define to_net_dev(class) container_of(class, struct net_device, class_dev)
static const char fmt_hex[] = "%#x\n";
+static const char fmt_long_hex[] = "%#lx\n";
static const char fmt_dec[] = "%d\n";
static const char fmt_ulong[] = "%lu\n";
@@ -91,7 +92,7 @@
NETDEVICE_ATTR(addr_len, fmt_dec);
NETDEVICE_ATTR(iflink, fmt_dec);
NETDEVICE_ATTR(ifindex, fmt_dec);
-NETDEVICE_ATTR(features, fmt_hex);
+NETDEVICE_ATTR(features, fmt_long_hex);
NETDEVICE_ATTR(type, fmt_dec);
/* use same locking rules as GIFHWADDR ioctl's */
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 3cc9673..478a301 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -233,11 +233,14 @@
static void inet_del_ifa(struct in_device *in_dev, struct in_ifaddr **ifap,
int destroy)
{
+ struct in_ifaddr *promote = NULL;
struct in_ifaddr *ifa1 = *ifap;
ASSERT_RTNL();
- /* 1. Deleting primary ifaddr forces deletion all secondaries */
+ /* 1. Deleting primary ifaddr forces deletion all secondaries
+ * unless alias promotion is set
+ **/
if (!(ifa1->ifa_flags & IFA_F_SECONDARY)) {
struct in_ifaddr *ifa;
@@ -251,11 +254,16 @@
continue;
}
- *ifap1 = ifa->ifa_next;
+ if (!IN_DEV_PROMOTE_SECONDARIES(in_dev)) {
+ *ifap1 = ifa->ifa_next;
- rtmsg_ifa(RTM_DELADDR, ifa);
- notifier_call_chain(&inetaddr_chain, NETDEV_DOWN, ifa);
- inet_free_ifa(ifa);
+ rtmsg_ifa(RTM_DELADDR, ifa);
+ notifier_call_chain(&inetaddr_chain, NETDEV_DOWN, ifa);
+ inet_free_ifa(ifa);
+ } else {
+ promote = ifa;
+ break;
+ }
}
}
@@ -281,6 +289,13 @@
if (!in_dev->ifa_list)
inetdev_destroy(in_dev);
}
+
+ if (promote && IN_DEV_PROMOTE_SECONDARIES(in_dev)) {
+ /* not sure if we should send a delete notify first? */
+ promote->ifa_flags &= ~IFA_F_SECONDARY;
+ rtmsg_ifa(RTM_NEWADDR, promote);
+ notifier_call_chain(&inetaddr_chain, NETDEV_UP, promote);
+ }
}
static int inet_insert_ifa(struct in_ifaddr *ifa)
@@ -1384,6 +1399,15 @@
.proc_handler = &ipv4_doint_and_flush,
.strategy = &ipv4_doint_and_flush_strategy,
},
+ {
+ .ctl_name = NET_IPV4_CONF_PROMOTE_SECONDARIES,
+ .procname = "promote_secondaries",
+ .data = &ipv4_devconf.promote_secondaries,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &ipv4_doint_and_flush,
+ .strategy = &ipv4_doint_and_flush_strategy,
+ },
},
.devinet_dev = {
{
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 053a883..eae84cc 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -478,7 +478,7 @@
{
struct xfrm_decap_state decap;
- if (sizeof(struct esp_decap_data) <
+ if (sizeof(struct esp_decap_data) >
sizeof(decap.decap_data)) {
extern void decap_data_too_small(void);
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index daebd93..760dc82 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -490,6 +490,14 @@
/* Partially cloned skb? */
if (skb_shared(frag))
goto slow_path;
+
+ BUG_ON(frag->sk);
+ if (skb->sk) {
+ sock_hold(skb->sk);
+ frag->sk = skb->sk;
+ frag->destructor = sock_wfree;
+ skb->truesize -= frag->truesize;
+ }
}
/* Everything is OK. Generate! */
diff --git a/net/ipv4/ipvs/Makefile b/net/ipv4/ipvs/Makefile
index a788461..30e85de 100644
--- a/net/ipv4/ipvs/Makefile
+++ b/net/ipv4/ipvs/Makefile
@@ -11,7 +11,7 @@
ip_vs-objs := ip_vs_conn.o ip_vs_core.o ip_vs_ctl.o ip_vs_sched.o \
ip_vs_xmit.o ip_vs_app.o ip_vs_sync.o \
- ip_vs_est.o ip_vs_proto.o ip_vs_proto_icmp.o \
+ ip_vs_est.o ip_vs_proto.o \
$(ip_vs_proto-objs-y)
diff --git a/net/ipv4/ipvs/ip_vs_proto.c b/net/ipv4/ipvs/ip_vs_proto.c
index 253c462..867d4e9 100644
--- a/net/ipv4/ipvs/ip_vs_proto.c
+++ b/net/ipv4/ipvs/ip_vs_proto.c
@@ -216,9 +216,6 @@
#ifdef CONFIG_IP_VS_PROTO_UDP
REGISTER_PROTOCOL(&ip_vs_protocol_udp);
#endif
-#ifdef CONFIG_IP_VS_PROTO_ICMP
- REGISTER_PROTOCOL(&ip_vs_protocol_icmp);
-#endif
#ifdef CONFIG_IP_VS_PROTO_AH
REGISTER_PROTOCOL(&ip_vs_protocol_ah);
#endif
diff --git a/net/ipv4/ipvs/ip_vs_proto_icmp.c b/net/ipv4/ipvs/ip_vs_proto_icmp.c
deleted file mode 100644
index 191e94a..0000000
--- a/net/ipv4/ipvs/ip_vs_proto_icmp.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * ip_vs_proto_icmp.c: ICMP load balancing support for IP Virtual Server
- *
- * Authors: Julian Anastasov <ja@ssi.bg>, March 2002
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation;
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/icmp.h>
-#include <linux/netfilter.h>
-#include <linux/netfilter_ipv4.h>
-
-#include <net/ip_vs.h>
-
-
-static int icmp_timeouts[1] = { 1*60*HZ };
-
-static char * icmp_state_name_table[1] = { "ICMP" };
-
-static struct ip_vs_conn *
-icmp_conn_in_get(const struct sk_buff *skb,
- struct ip_vs_protocol *pp,
- const struct iphdr *iph,
- unsigned int proto_off,
- int inverse)
-{
-#if 0
- struct ip_vs_conn *cp;
-
- if (likely(!inverse)) {
- cp = ip_vs_conn_in_get(iph->protocol,
- iph->saddr, 0,
- iph->daddr, 0);
- } else {
- cp = ip_vs_conn_in_get(iph->protocol,
- iph->daddr, 0,
- iph->saddr, 0);
- }
-
- return cp;
-
-#else
- return NULL;
-#endif
-}
-
-static struct ip_vs_conn *
-icmp_conn_out_get(const struct sk_buff *skb,
- struct ip_vs_protocol *pp,
- const struct iphdr *iph,
- unsigned int proto_off,
- int inverse)
-{
-#if 0
- struct ip_vs_conn *cp;
-
- if (likely(!inverse)) {
- cp = ip_vs_conn_out_get(iph->protocol,
- iph->saddr, 0,
- iph->daddr, 0);
- } else {
- cp = ip_vs_conn_out_get(IPPROTO_UDP,
- iph->daddr, 0,
- iph->saddr, 0);
- }
-
- return cp;
-#else
- return NULL;
-#endif
-}
-
-static int
-icmp_conn_schedule(struct sk_buff *skb, struct ip_vs_protocol *pp,
- int *verdict, struct ip_vs_conn **cpp)
-{
- *verdict = NF_ACCEPT;
- return 0;
-}
-
-static int
-icmp_csum_check(struct sk_buff *skb, struct ip_vs_protocol *pp)
-{
- if (!(skb->nh.iph->frag_off & __constant_htons(IP_OFFSET))) {
- if (skb->ip_summed != CHECKSUM_UNNECESSARY) {
- if (ip_vs_checksum_complete(skb, skb->nh.iph->ihl * 4)) {
- IP_VS_DBG_RL_PKT(0, pp, skb, 0, "Failed checksum for");
- return 0;
- }
- }
- }
- return 1;
-}
-
-static void
-icmp_debug_packet(struct ip_vs_protocol *pp,
- const struct sk_buff *skb,
- int offset,
- const char *msg)
-{
- char buf[256];
- struct iphdr _iph, *ih;
-
- ih = skb_header_pointer(skb, offset, sizeof(_iph), &_iph);
- if (ih == NULL)
- sprintf(buf, "%s TRUNCATED", pp->name);
- else if (ih->frag_off & __constant_htons(IP_OFFSET))
- sprintf(buf, "%s %u.%u.%u.%u->%u.%u.%u.%u frag",
- pp->name, NIPQUAD(ih->saddr),
- NIPQUAD(ih->daddr));
- else {
- struct icmphdr _icmph, *ic;
-
- ic = skb_header_pointer(skb, offset + ih->ihl*4,
- sizeof(_icmph), &_icmph);
- if (ic == NULL)
- sprintf(buf, "%s TRUNCATED to %u bytes\n",
- pp->name, skb->len - offset);
- else
- sprintf(buf, "%s %u.%u.%u.%u->%u.%u.%u.%u T:%d C:%d",
- pp->name, NIPQUAD(ih->saddr),
- NIPQUAD(ih->daddr),
- ic->type, ic->code);
- }
- printk(KERN_DEBUG "IPVS: %s: %s\n", msg, buf);
-}
-
-static int
-icmp_state_transition(struct ip_vs_conn *cp, int direction,
- const struct sk_buff *skb,
- struct ip_vs_protocol *pp)
-{
- cp->timeout = pp->timeout_table[IP_VS_ICMP_S_NORMAL];
- return 1;
-}
-
-static int
-icmp_set_state_timeout(struct ip_vs_protocol *pp, char *sname, int to)
-{
- int num;
- char **names;
-
- num = IP_VS_ICMP_S_LAST;
- names = icmp_state_name_table;
- return ip_vs_set_state_timeout(pp->timeout_table, num, names, sname, to);
-}
-
-
-static void icmp_init(struct ip_vs_protocol *pp)
-{
- pp->timeout_table = icmp_timeouts;
-}
-
-static void icmp_exit(struct ip_vs_protocol *pp)
-{
-}
-
-struct ip_vs_protocol ip_vs_protocol_icmp = {
- .name = "ICMP",
- .protocol = IPPROTO_ICMP,
- .dont_defrag = 0,
- .init = icmp_init,
- .exit = icmp_exit,
- .conn_schedule = icmp_conn_schedule,
- .conn_in_get = icmp_conn_in_get,
- .conn_out_get = icmp_conn_out_get,
- .snat_handler = NULL,
- .dnat_handler = NULL,
- .csum_check = icmp_csum_check,
- .state_transition = icmp_state_transition,
- .register_app = NULL,
- .unregister_app = NULL,
- .app_conn_bind = NULL,
- .debug_packet = icmp_debug_packet,
- .timeout_change = NULL,
- .set_state_timeout = icmp_set_state_timeout,
-};
diff --git a/net/ipv4/ipvs/ip_vs_xmit.c b/net/ipv4/ipvs/ip_vs_xmit.c
index faa6176..de21da0 100644
--- a/net/ipv4/ipvs/ip_vs_xmit.c
+++ b/net/ipv4/ipvs/ip_vs_xmit.c
@@ -508,7 +508,6 @@
rc = NF_ACCEPT;
/* do not touch skb anymore */
atomic_inc(&cp->in_pkts);
- __ip_vs_conn_put(cp);
goto out;
}
diff --git a/net/ipv4/multipath_drr.c b/net/ipv4/multipath_drr.c
index 9349686..cf2e6bc 100644
--- a/net/ipv4/multipath_drr.c
+++ b/net/ipv4/multipath_drr.c
@@ -57,7 +57,6 @@
static struct multipath_device state[MULTIPATH_MAX_DEVICECANDIDATES];
static DEFINE_SPINLOCK(state_lock);
-static struct rtable *last_selection = NULL;
static int inline __multipath_findslot(void)
{
@@ -111,11 +110,6 @@
.notifier_call = drr_dev_event,
};
-static void drr_remove(struct rtable *rt)
-{
- if (last_selection == rt)
- last_selection = NULL;
-}
static void drr_safe_inc(atomic_t *usecount)
{
@@ -144,14 +138,6 @@
int devidx = -1;
int cur_min_devidx = -1;
- /* if necessary and possible utilize the old alternative */
- if ((flp->flags & FLOWI_FLAG_MULTIPATHOLDROUTE) != 0 &&
- last_selection != NULL) {
- result = last_selection;
- *rp = result;
- return;
- }
-
/* 1. make sure all alt. nexthops have the same GC related data */
/* 2. determine the new candidate to be returned */
result = NULL;
@@ -229,12 +215,10 @@
}
*rp = result;
- last_selection = result;
}
static struct ip_mp_alg_ops drr_ops = {
.mp_alg_select_route = drr_select_route,
- .mp_alg_remove = drr_remove,
};
static int __init drr_init(void)
@@ -244,7 +228,7 @@
if (err)
return err;
- err = multipath_alg_register(&drr_ops, IP_MP_ALG_RR);
+ err = multipath_alg_register(&drr_ops, IP_MP_ALG_DRR);
if (err)
goto fail;
diff --git a/net/ipv4/multipath_rr.c b/net/ipv4/multipath_rr.c
index 554a825..061b6b2 100644
--- a/net/ipv4/multipath_rr.c
+++ b/net/ipv4/multipath_rr.c
@@ -47,29 +47,12 @@
#include <net/checksum.h>
#include <net/ip_mp_alg.h>
-#define MULTIPATH_MAX_CANDIDATES 40
-
-static struct rtable* last_used = NULL;
-
-static void rr_remove(struct rtable *rt)
-{
- if (last_used == rt)
- last_used = NULL;
-}
-
static void rr_select_route(const struct flowi *flp,
struct rtable *first, struct rtable **rp)
{
struct rtable *nh, *result, *min_use_cand = NULL;
int min_use = -1;
- /* if necessary and possible utilize the old alternative */
- if ((flp->flags & FLOWI_FLAG_MULTIPATHOLDROUTE) != 0 &&
- last_used != NULL) {
- result = last_used;
- goto out;
- }
-
/* 1. make sure all alt. nexthops have the same GC related data
* 2. determine the new candidate to be returned
*/
@@ -90,15 +73,12 @@
if (!result)
result = first;
-out:
- last_used = result;
result->u.dst.__use++;
*rp = result;
}
static struct ip_mp_alg_ops rr_ops = {
.mp_alg_select_route = rr_select_route,
- .mp_alg_remove = rr_remove,
};
static int __init rr_init(void)
diff --git a/net/ipv4/netfilter/ip_conntrack_core.c b/net/ipv4/netfilter/ip_conntrack_core.c
index 28d9425..09e8246 100644
--- a/net/ipv4/netfilter/ip_conntrack_core.c
+++ b/net/ipv4/netfilter/ip_conntrack_core.c
@@ -940,37 +940,25 @@
struct sk_buff *
ip_ct_gather_frags(struct sk_buff *skb, u_int32_t user)
{
- struct sock *sk = skb->sk;
#ifdef CONFIG_NETFILTER_DEBUG
unsigned int olddebug = skb->nf_debug;
#endif
- if (sk) {
- sock_hold(sk);
- skb_orphan(skb);
- }
+ skb_orphan(skb);
local_bh_disable();
skb = ip_defrag(skb, user);
local_bh_enable();
- if (!skb) {
- if (sk)
- sock_put(sk);
- return skb;
- }
-
- if (sk) {
- skb_set_owner_w(skb, sk);
- sock_put(sk);
- }
-
- ip_send_check(skb->nh.iph);
- skb->nfcache |= NFC_ALTERED;
+ if (skb) {
+ ip_send_check(skb->nh.iph);
+ skb->nfcache |= NFC_ALTERED;
#ifdef CONFIG_NETFILTER_DEBUG
- /* Packet path as if nothing had happened. */
- skb->nf_debug = olddebug;
+ /* Packet path as if nothing had happened. */
+ skb->nf_debug = olddebug;
#endif
+ }
+
return skb;
}
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index e5746b6..eda1fba 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -3,6 +3,7 @@
* communicating with userspace via netlink.
*
* (C) 2000-2002 James Morris <jmorris@intercode.com.au>
+ * (C) 2003-2005 Netfilter Core Team <coreteam@netfilter.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -17,6 +18,7 @@
* 2005-01-10: Added /proc counter for dropped packets; fixed so
* packets aren't delivered to user space if they're going
* to be dropped.
+ * 2005-05-26: local_bh_{disable,enable} around nf_reinject (Harald Welte)
*
*/
#include <linux/module.h>
@@ -71,7 +73,15 @@
static void
ipq_issue_verdict(struct ipq_queue_entry *entry, int verdict)
{
+ /* TCP input path (and probably other bits) assume to be called
+ * from softirq context, not from syscall, like ipq_issue_verdict is
+ * called. TCP input path deadlocks with locks taken from timer
+ * softirq, e.g. We therefore emulate this by local_bh_disable() */
+
+ local_bh_disable();
nf_reinject(entry->skb, entry->info, verdict);
+ local_bh_enable();
+
kfree(entry);
}
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 79835a6..5bad504 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -4355,16 +4355,7 @@
goto no_ack;
}
- if (eaten) {
- if (tcp_in_quickack_mode(tp)) {
- tcp_send_ack(sk);
- } else {
- tcp_send_delayed_ack(sk);
- }
- } else {
- __tcp_ack_snd_check(sk, 0);
- }
-
+ __tcp_ack_snd_check(sk, 0);
no_ack:
if (eaten)
__kfree_skb(skb);
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 4a6952e..7c24e64 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -738,7 +738,7 @@
unsigned long amount;
amount = 0;
- spin_lock_irq(&sk->sk_receive_queue.lock);
+ spin_lock_bh(&sk->sk_receive_queue.lock);
skb = skb_peek(&sk->sk_receive_queue);
if (skb != NULL) {
/*
@@ -748,7 +748,7 @@
*/
amount = skb->len - sizeof(struct udphdr);
}
- spin_unlock_irq(&sk->sk_receive_queue.lock);
+ spin_unlock_bh(&sk->sk_receive_queue.lock);
return put_user(amount, (int __user *)arg);
}
@@ -848,12 +848,12 @@
/* Clear queue. */
if (flags&MSG_PEEK) {
int clear = 0;
- spin_lock_irq(&sk->sk_receive_queue.lock);
+ spin_lock_bh(&sk->sk_receive_queue.lock);
if (skb == skb_peek(&sk->sk_receive_queue)) {
__skb_unlink(skb, &sk->sk_receive_queue);
clear = 1;
}
- spin_unlock_irq(&sk->sk_receive_queue.lock);
+ spin_unlock_bh(&sk->sk_receive_queue.lock);
if (clear)
kfree_skb(skb);
}
@@ -1334,7 +1334,7 @@
struct sk_buff_head *rcvq = &sk->sk_receive_queue;
struct sk_buff *skb;
- spin_lock_irq(&rcvq->lock);
+ spin_lock_bh(&rcvq->lock);
while ((skb = skb_peek(rcvq)) != NULL) {
if (udp_checksum_complete(skb)) {
UDP_INC_STATS_BH(UDP_MIB_INERRORS);
@@ -1345,7 +1345,7 @@
break;
}
}
- spin_unlock_irq(&rcvq->lock);
+ spin_unlock_bh(&rcvq->lock);
/* nothing to see, move along */
if (skb == NULL)
diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c
index a93f6dc..0e5f749 100644
--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -535,10 +535,12 @@
if (err)
goto done;
- /* Do not check for fault */
- if (!freq.flr_label)
- copy_to_user(&((struct in6_flowlabel_req __user *) optval)->flr_label,
- &fl->label, sizeof(fl->label));
+ if (!freq.flr_label) {
+ if (copy_to_user(&((struct in6_flowlabel_req __user *) optval)->flr_label,
+ &fl->label, sizeof(fl->label))) {
+ /* Intentionally ignore fault. */
+ }
+ }
sfl1->fl = fl;
sfl1->next = np->ipv6_fl_list;
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 0f07114..b78a535 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -552,13 +552,17 @@
skb_headroom(frag) < hlen)
goto slow_path;
- /* Correct socket ownership. */
- if (frag->sk == NULL)
- goto slow_path;
-
/* Partially cloned skb? */
if (skb_shared(frag))
goto slow_path;
+
+ BUG_ON(frag->sk);
+ if (skb->sk) {
+ sock_hold(skb->sk);
+ frag->sk = skb->sk;
+ frag->destructor = sock_wfree;
+ skb->truesize -= frag->truesize;
+ }
}
err = 0;
@@ -1116,12 +1120,10 @@
tail_skb = &(tmp_skb->next);
skb->len += tmp_skb->len;
skb->data_len += tmp_skb->len;
-#if 0 /* Logically correct, but useless work, ip_fragment() will have to undo */
skb->truesize += tmp_skb->truesize;
__sock_put(tmp_skb->sk);
tmp_skb->destructor = NULL;
tmp_skb->sk = NULL;
-#endif
}
ipv6_addr_copy(final_dst, &fl->fl6_dst);
diff --git a/net/ipv6/ipv6_syms.c b/net/ipv6/ipv6_syms.c
index 2f4c91d..5ade5a5 100644
--- a/net/ipv6/ipv6_syms.c
+++ b/net/ipv6/ipv6_syms.c
@@ -37,5 +37,4 @@
EXPORT_SYMBOL(xfrm6_rcv);
#endif
EXPORT_SYMBOL(rt6_lookup);
-EXPORT_SYMBOL(fl6_sock_lookup);
EXPORT_SYMBOL(ipv6_push_nfrag_opts);
diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c
index 601a148..6b98677 100644
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -84,6 +84,7 @@
mtu = IPV6_MIN_MTU;
if (skb->len > mtu) {
+ skb->dev = dst->dev;
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, skb->dev);
ret = -EMSGSIZE;
}
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 4429b1a..cf1d91e 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -113,6 +113,8 @@
xdst = (struct xfrm_dst *)dst1;
xdst->route = &rt->u.dst;
+ if (rt->rt6i_node)
+ xdst->route_cookie = rt->rt6i_node->fn_sernum;
dst1->next = dst_prev;
dst_prev = dst1;
@@ -137,6 +139,8 @@
dst_prev->child = &rt->u.dst;
dst->path = &rt->u.dst;
+ if (rt->rt6i_node)
+ ((struct xfrm_dst *)dst)->path_cookie = rt->rt6i_node->fn_sernum;
*dst_p = dst;
dst = dst_prev;
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 733bf52..e41ce45 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -735,11 +735,15 @@
sock_hold(sk);
if (p->skb2 == NULL) {
- if (atomic_read(&p->skb->users) != 1) {
+ if (skb_shared(p->skb)) {
p->skb2 = skb_clone(p->skb, p->allocation);
} else {
- p->skb2 = p->skb;
- atomic_inc(&p->skb->users);
+ p->skb2 = skb_get(p->skb);
+ /*
+ * skb ownership may have been set when
+ * delivered to a previous socket.
+ */
+ skb_orphan(p->skb2);
}
}
if (p->skb2 == NULL) {
@@ -785,11 +789,12 @@
sk_for_each_bound(sk, node, &nl_table[ssk->sk_protocol].mc_list)
do_one_broadcast(sk, &info);
+ kfree_skb(skb);
+
netlink_unlock_table();
if (info.skb2)
kfree_skb(info.skb2);
- kfree_skb(skb);
if (info.delivered) {
if (info.congested && (allocation & __GFP_WAIT))
diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c
index 8a3db9d..d8bd2a5 100644
--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -18,7 +18,7 @@
#include <asm/byteorder.h>
-#if 1 /* control */
+#if 0 /* control */
#define DPRINTK(format,args...) printk(KERN_DEBUG format,##args)
#else
#define DPRINTK(format,args...)
@@ -73,8 +73,13 @@
DPRINTK("dsmark_graft(sch %p,[qdisc %p],new %p,old %p)\n",sch,p,new,
old);
- if (!new)
- new = &noop_qdisc;
+
+ if (new == NULL) {
+ new = qdisc_create_dflt(sch->dev, &pfifo_qdisc_ops);
+ if (new == NULL)
+ new = &noop_qdisc;
+ }
+
sch_tree_lock(sch);
*old = xchg(&p->q,new);
if (*old)
@@ -163,14 +168,15 @@
return;
for (i = 0; i < p->indices; i++) {
if (p->mask[i] == 0xff && !p->value[i])
- continue;
+ goto ignore;
if (walker->count >= walker->skip) {
if (walker->fn(sch, i+1, walker) < 0) {
walker->stop = 1;
break;
}
}
- walker->count++;
+ignore:
+ walker->count++;
}
}
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index e0c9fbe..bb9bf8d 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -53,7 +53,6 @@
struct netem_sched_data {
struct Qdisc *qdisc;
- struct sk_buff_head delayed;
struct timer_list timer;
u32 latency;
@@ -63,11 +62,12 @@
u32 gap;
u32 jitter;
u32 duplicate;
+ u32 reorder;
struct crndstate {
unsigned long last;
unsigned long rho;
- } delay_cor, loss_cor, dup_cor;
+ } delay_cor, loss_cor, dup_cor, reorder_cor;
struct disttable {
u32 size;
@@ -137,122 +137,68 @@
return x / NETEM_DIST_SCALE + (sigma / NETEM_DIST_SCALE) * t + mu;
}
-/* Put skb in the private delayed queue. */
-static int netem_delay(struct Qdisc *sch, struct sk_buff *skb)
-{
- struct netem_sched_data *q = qdisc_priv(sch);
- psched_tdiff_t td;
- psched_time_t now;
-
- PSCHED_GET_TIME(now);
- td = tabledist(q->latency, q->jitter, &q->delay_cor, q->delay_dist);
-
- /* Always queue at tail to keep packets in order */
- if (likely(q->delayed.qlen < q->limit)) {
- struct netem_skb_cb *cb = (struct netem_skb_cb *)skb->cb;
-
- PSCHED_TADD2(now, td, cb->time_to_send);
-
- pr_debug("netem_delay: skb=%p now=%llu tosend=%llu\n", skb,
- now, cb->time_to_send);
-
- __skb_queue_tail(&q->delayed, skb);
- return NET_XMIT_SUCCESS;
- }
-
- pr_debug("netem_delay: queue over limit %d\n", q->limit);
- sch->qstats.overlimits++;
- kfree_skb(skb);
- return NET_XMIT_DROP;
-}
-
/*
- * Move a packet that is ready to send from the delay holding
- * list to the underlying qdisc.
+ * Insert one skb into qdisc.
+ * Note: parent depends on return value to account for queue length.
+ * NET_XMIT_DROP: queue length didn't change.
+ * NET_XMIT_SUCCESS: one skb was queued.
*/
-static int netem_run(struct Qdisc *sch)
-{
- struct netem_sched_data *q = qdisc_priv(sch);
- struct sk_buff *skb;
- psched_time_t now;
-
- PSCHED_GET_TIME(now);
-
- skb = skb_peek(&q->delayed);
- if (skb) {
- const struct netem_skb_cb *cb
- = (const struct netem_skb_cb *)skb->cb;
- long delay
- = PSCHED_US2JIFFIE(PSCHED_TDIFF(cb->time_to_send, now));
- pr_debug("netem_run: skb=%p delay=%ld\n", skb, delay);
-
- /* if more time remaining? */
- if (delay > 0) {
- mod_timer(&q->timer, jiffies + delay);
- return 1;
- }
-
- __skb_unlink(skb, &q->delayed);
-
- if (q->qdisc->enqueue(skb, q->qdisc)) {
- sch->q.qlen--;
- sch->qstats.drops++;
- }
- }
-
- return 0;
-}
-
static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch)
{
struct netem_sched_data *q = qdisc_priv(sch);
+ struct netem_skb_cb *cb = (struct netem_skb_cb *)skb->cb;
+ struct sk_buff *skb2;
int ret;
+ int count = 1;
pr_debug("netem_enqueue skb=%p\n", skb);
+ /* Random duplication */
+ if (q->duplicate && q->duplicate >= get_crandom(&q->dup_cor))
+ ++count;
+
/* Random packet drop 0 => none, ~0 => all */
- if (q->loss && q->loss >= get_crandom(&q->loss_cor)) {
- pr_debug("netem_enqueue: random loss\n");
+ if (q->loss && q->loss >= get_crandom(&q->loss_cor))
+ --count;
+
+ if (count == 0) {
sch->qstats.drops++;
kfree_skb(skb);
- return 0; /* lie about loss so TCP doesn't know */
+ return NET_XMIT_DROP;
}
- /* Random duplication */
- if (q->duplicate && q->duplicate >= get_crandom(&q->dup_cor)) {
- struct sk_buff *skb2;
-
- skb2 = skb_clone(skb, GFP_ATOMIC);
- if (skb2 && netem_delay(sch, skb2) == NET_XMIT_SUCCESS) {
- struct Qdisc *qp;
-
- /* Since one packet can generate two packets in the
- * queue, the parent's qlen accounting gets confused,
- * so fix it.
- */
- qp = qdisc_lookup(sch->dev, TC_H_MAJ(sch->parent));
- if (qp)
- qp->q.qlen++;
-
- sch->q.qlen++;
- sch->bstats.bytes += skb2->len;
- sch->bstats.packets++;
- } else
- sch->qstats.drops++;
- }
-
- /* If doing simple delay then gap == 0 so all packets
- * go into the delayed holding queue
- * otherwise if doing out of order only "1 out of gap"
- * packets will be delayed.
+ /*
+ * If we need to duplicate packet, then re-insert at top of the
+ * qdisc tree, since parent queuer expects that only one
+ * skb will be queued.
*/
- if (q->counter < q->gap) {
+ if (count > 1 && (skb2 = skb_clone(skb, GFP_ATOMIC)) != NULL) {
+ struct Qdisc *rootq = sch->dev->qdisc;
+ u32 dupsave = q->duplicate; /* prevent duplicating a dup... */
+ q->duplicate = 0;
+
+ rootq->enqueue(skb2, rootq);
+ q->duplicate = dupsave;
+ }
+
+ if (q->gap == 0 /* not doing reordering */
+ || q->counter < q->gap /* inside last reordering gap */
+ || q->reorder < get_crandom(&q->reorder_cor)) {
+ psched_time_t now;
+ PSCHED_GET_TIME(now);
+ PSCHED_TADD2(now, tabledist(q->latency, q->jitter,
+ &q->delay_cor, q->delay_dist),
+ cb->time_to_send);
++q->counter;
ret = q->qdisc->enqueue(skb, q->qdisc);
} else {
+ /*
+ * Do re-ordering by putting one out of N packets at the front
+ * of the queue.
+ */
+ PSCHED_GET_TIME(cb->time_to_send);
q->counter = 0;
- ret = netem_delay(sch, skb);
- netem_run(sch);
+ ret = q->qdisc->ops->requeue(skb, q->qdisc);
}
if (likely(ret == NET_XMIT_SUCCESS)) {
@@ -296,22 +242,33 @@
{
struct netem_sched_data *q = qdisc_priv(sch);
struct sk_buff *skb;
- int pending;
-
- pending = netem_run(sch);
skb = q->qdisc->dequeue(q->qdisc);
if (skb) {
- pr_debug("netem_dequeue: return skb=%p\n", skb);
- sch->q.qlen--;
- sch->flags &= ~TCQ_F_THROTTLED;
- }
- else if (pending) {
- pr_debug("netem_dequeue: throttling\n");
- sch->flags |= TCQ_F_THROTTLED;
- }
+ const struct netem_skb_cb *cb
+ = (const struct netem_skb_cb *)skb->cb;
+ psched_time_t now;
+ long delay;
- return skb;
+ /* if more time remaining? */
+ PSCHED_GET_TIME(now);
+ delay = PSCHED_US2JIFFIE(PSCHED_TDIFF(cb->time_to_send, now));
+ pr_debug("netem_run: skb=%p delay=%ld\n", skb, delay);
+ if (delay <= 0) {
+ pr_debug("netem_dequeue: return skb=%p\n", skb);
+ sch->q.qlen--;
+ sch->flags &= ~TCQ_F_THROTTLED;
+ return skb;
+ }
+
+ mod_timer(&q->timer, jiffies + delay);
+ sch->flags |= TCQ_F_THROTTLED;
+
+ if (q->qdisc->ops->requeue(skb, q->qdisc) != 0)
+ sch->qstats.drops++;
+ }
+
+ return NULL;
}
static void netem_watchdog(unsigned long arg)
@@ -328,8 +285,6 @@
struct netem_sched_data *q = qdisc_priv(sch);
qdisc_reset(q->qdisc);
- skb_queue_purge(&q->delayed);
-
sch->q.qlen = 0;
sch->flags &= ~TCQ_F_THROTTLED;
del_timer_sync(&q->timer);
@@ -397,6 +352,19 @@
return 0;
}
+static int get_reorder(struct Qdisc *sch, const struct rtattr *attr)
+{
+ struct netem_sched_data *q = qdisc_priv(sch);
+ const struct tc_netem_reorder *r = RTA_DATA(attr);
+
+ if (RTA_PAYLOAD(attr) != sizeof(*r))
+ return -EINVAL;
+
+ q->reorder = r->probability;
+ init_crandom(&q->reorder_cor, r->correlation);
+ return 0;
+}
+
static int netem_change(struct Qdisc *sch, struct rtattr *opt)
{
struct netem_sched_data *q = qdisc_priv(sch);
@@ -417,9 +385,15 @@
q->jitter = qopt->jitter;
q->limit = qopt->limit;
q->gap = qopt->gap;
+ q->counter = 0;
q->loss = qopt->loss;
q->duplicate = qopt->duplicate;
+ /* for compatiablity with earlier versions.
+ * if gap is set, need to assume 100% probablity
+ */
+ q->reorder = ~0;
+
/* Handle nested options after initial queue options.
* Should have put all options in nested format but too late now.
*/
@@ -441,6 +415,11 @@
if (ret)
return ret;
}
+ if (tb[TCA_NETEM_REORDER-1]) {
+ ret = get_reorder(sch, tb[TCA_NETEM_REORDER-1]);
+ if (ret)
+ return ret;
+ }
}
@@ -455,11 +434,9 @@
if (!opt)
return -EINVAL;
- skb_queue_head_init(&q->delayed);
init_timer(&q->timer);
q->timer.function = netem_watchdog;
q->timer.data = (unsigned long) sch;
- q->counter = 0;
q->qdisc = qdisc_create_dflt(sch->dev, &pfifo_qdisc_ops);
if (!q->qdisc) {
@@ -491,6 +468,7 @@
struct rtattr *rta = (struct rtattr *) b;
struct tc_netem_qopt qopt;
struct tc_netem_corr cor;
+ struct tc_netem_reorder reorder;
qopt.latency = q->latency;
qopt.jitter = q->jitter;
@@ -504,6 +482,11 @@
cor.loss_corr = q->loss_cor.rho;
cor.dup_corr = q->dup_cor.rho;
RTA_PUT(skb, TCA_NETEM_CORR, sizeof(cor), &cor);
+
+ reorder.probability = q->reorder;
+ reorder.correlation = q->reorder_cor.rho;
+ RTA_PUT(skb, TCA_NETEM_REORDER, sizeof(reorder), &reorder);
+
rta->rta_len = skb->tail - b;
return skb->len;
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index c478fc8..c420eba 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -770,33 +770,12 @@
err = path_lookup(sunaddr->sun_path, LOOKUP_PARENT, &nd);
if (err)
goto out_mknod_parent;
- /*
- * Yucky last component or no last component at all?
- * (foo/., foo/.., /////)
- */
- err = -EEXIST;
- if (nd.last_type != LAST_NORM)
- goto out_mknod;
- /*
- * Lock the directory.
- */
- down(&nd.dentry->d_inode->i_sem);
- /*
- * Do the final lookup.
- */
- dentry = lookup_hash(&nd.last, nd.dentry);
+
+ dentry = lookup_create(&nd, 0);
err = PTR_ERR(dentry);
if (IS_ERR(dentry))
goto out_mknod_unlock;
- err = -ENOENT;
- /*
- * Special case - lookup gave negative, but... we had foo/bar/
- * From the vfs_mknod() POV we just have a negative dentry -
- * all is fine. Let's be bastards - you had / on the end, you've
- * been asking for (non-existent) directory. -ENOENT for you.
- */
- if (nd.last.name[nd.last.len] && !dentry->d_inode)
- goto out_mknod_dput;
+
/*
* All right, let's create it.
*/
@@ -845,7 +824,6 @@
dput(dentry);
out_mknod_unlock:
up(&nd.dentry->d_inode->i_sem);
-out_mknod:
path_release(&nd);
out_mknod_parent:
if (err==-EEXIST)
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index 080aae2..2f4531f 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -698,7 +698,7 @@
return -ENOMEM;
if (skb1->sk)
- skb_set_owner_w(skb, skb1->sk);
+ skb_set_owner_w(skb2, skb1->sk);
/* Looking around. Are we still alive?
* OK, link new skb, drop old one */
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 55ed979..d07f5ce 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1136,7 +1136,7 @@
struct xfrm_dst *last;
u32 mtu;
- if (!dst_check(dst->path, 0) ||
+ if (!dst_check(dst->path, ((struct xfrm_dst *)dst)->path_cookie) ||
(dst->dev && !netif_running(dst->dev)))
return 0;
@@ -1156,7 +1156,7 @@
xdst->child_mtu_cached = mtu;
}
- if (!dst_check(xdst->route, 0))
+ if (!dst_check(xdst->route, xdst->route_cookie))
return 0;
mtu = dst_mtu(xdst->route);
if (xdst->route_mtu_cached != mtu) {
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 5ddda2c..9750901 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -34,14 +34,21 @@
{
struct rtattr *rt = xfrma[type - 1];
struct xfrm_algo *algp;
+ int len;
if (!rt)
return 0;
- if ((rt->rta_len - sizeof(*rt)) < sizeof(*algp))
+ len = (rt->rta_len - sizeof(*rt)) - sizeof(*algp);
+ if (len < 0)
return -EINVAL;
algp = RTA_DATA(rt);
+
+ len -= (algp->alg_key_len + 7U) / 8;
+ if (len < 0)
+ return -EINVAL;
+
switch (type) {
case XFRMA_ALG_AUTH:
if (!algp->alg_key_len &&
@@ -162,6 +169,7 @@
struct rtattr *rta = u_arg;
struct xfrm_algo *p, *ualg;
struct xfrm_algo_desc *algo;
+ int len;
if (!rta)
return 0;
@@ -173,11 +181,12 @@
return -ENOSYS;
*props = algo->desc.sadb_alg_id;
- p = kmalloc(sizeof(*ualg) + ualg->alg_key_len, GFP_KERNEL);
+ len = sizeof(*ualg) + (ualg->alg_key_len + 7U) / 8;
+ p = kmalloc(len, GFP_KERNEL);
if (!p)
return -ENOMEM;
- memcpy(p, ualg, sizeof(*ualg) + ualg->alg_key_len);
+ memcpy(p, ualg, len);
*algpp = p;
return 0;
}
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index 5a820cf..8449d66 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -476,8 +476,8 @@
int rc = 0;
if (!ss_initialized) {
- avd->allowed = requested;
- avd->decided = requested;
+ avd->allowed = 0xffffffff;
+ avd->decided = 0xffffffff;
avd->auditallow = 0;
avd->auditdeny = 0xffffffff;
avd->seqno = latest_granting;
@@ -1196,9 +1196,11 @@
}
policydb_loaded_version = policydb.policyvers;
ss_initialized = 1;
-
+ seqno = ++latest_granting;
LOAD_UNLOCK;
selinux_complete_init();
+ avc_ss_reset(seqno);
+ selnl_notify_policyload(seqno);
return 0;
}
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index a9602f8..e537bd6 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -112,7 +112,7 @@
config SOUND_ES1370
tristate "Ensoniq AudioPCI (ES1370)"
- depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+ depends on SOUND_PRIME!=n && SOUND && PCI
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
@@ -125,7 +125,7 @@
config SOUND_ES1371
tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
- depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+ depends on SOUND_PRIME!=n && SOUND && PCI
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
@@ -138,7 +138,7 @@
config SOUND_ESSSOLO1
tristate "ESS Technology Solo1"
- depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT && PCI
+ depends on SOUND_PRIME!=n && SOUND && PCI
help
Say Y or M if you have a PCI sound card utilizing the ESS Technology
Solo1 chip. To find out if your sound card uses a
@@ -179,7 +179,7 @@
config SOUND_SONICVIBES
tristate "S3 SonicVibes"
- depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+ depends on SOUND_PRIME!=n && SOUND
help
Say Y or M if you have a PCI sound card utilizing the S3
SonicVibes chipset. To find out if your sound card uses a
@@ -226,7 +226,7 @@
config SOUND_TRIDENT
tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
- depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+ depends on SOUND_PRIME!=n && SOUND
---help---
Say Y or M if you have a PCI sound card utilizing the Trident
4DWave-DX/NX chipset or your mother board chipset has SiS 7018
@@ -739,7 +739,7 @@
config SOUND_MAD16
tristate "OPTi MAD16 and/or Mozart based cards"
- depends on SOUND_OSS && SOUND_GAMEPORT
+ depends on SOUND_OSS
---help---
Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
82C928 or 82C929 or 82C931) audio interface chip. These chips are
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 32d9475..080ef39 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -876,7 +876,7 @@
*/
static int __init snd_pmac_detect(pmac_t *chip)
{
- struct device_node *sound;
+ struct device_node *sound = NULL;
unsigned int *prop, l;
struct macio_chip* macio;
@@ -906,20 +906,22 @@
chip->is_pbook_G3 = 1;
chip->node = find_devices("awacs");
if (chip->node)
- return 0; /* ok */
+ sound = chip->node;
/*
* powermac G3 models have a node called "davbus"
* with a child called "sound".
*/
- chip->node = find_devices("davbus");
+ if (!chip->node)
+ chip->node = find_devices("davbus");
/*
* if we didn't find a davbus device, try 'i2s-a' since
* this seems to be what iBooks have
*/
if (! chip->node) {
chip->node = find_devices("i2s-a");
- if (chip->node && chip->node->parent && chip->node->parent->parent) {
+ if (chip->node && chip->node->parent &&
+ chip->node->parent->parent) {
if (device_is_compatible(chip->node->parent->parent,
"K2-Keylargo"))
chip->is_k2 = 1;
@@ -928,9 +930,11 @@
if (! chip->node)
return -ENODEV;
- sound = find_devices("sound");
- while (sound && sound->parent != chip->node)
- sound = sound->next;
+ if (!sound) {
+ sound = find_devices("sound");
+ while (sound && sound->parent != chip->node)
+ sound = sound->next;
+ }
if (! sound)
return -ENODEV;
prop = (unsigned int *) get_property(sound, "sub-frame", NULL);
@@ -1019,7 +1023,8 @@
}
}
if (chip->pdev == NULL)
- printk(KERN_WARNING "snd-powermac: can't locate macio PCI device !\n");
+ printk(KERN_WARNING "snd-powermac: can't locate macio PCI"
+ " device !\n");
detect_byte_swap(chip);
@@ -1027,7 +1032,8 @@
are available */
prop = (unsigned int *) get_property(sound, "sample-rates", &l);
if (! prop)
- prop = (unsigned int *) get_property(sound, "output-frame-rates", &l);
+ prop = (unsigned int *) get_property(sound,
+ "output-frame-rates", &l);
if (prop) {
int i;
chip->freqs_ok = 0;
@@ -1054,7 +1060,8 @@
/*
* exported - boolean info callbacks for ease of programming
*/
-int snd_pmac_boolean_stereo_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
+int snd_pmac_boolean_stereo_info(snd_kcontrol_t *kcontrol,
+ snd_ctl_elem_info_t *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
uinfo->count = 2;
@@ -1063,7 +1070,8 @@
return 0;
}
-int snd_pmac_boolean_mono_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
+int snd_pmac_boolean_mono_info(snd_kcontrol_t *kcontrol,
+ snd_ctl_elem_info_t *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
uinfo->count = 1;