ARM: pxa: change gpio to platform device
Remove most gpio macros and change gpio driver to platform driver.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index fb7dfc1..edcbada 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -231,6 +231,7 @@
pxa168_add_nand(&aspenite_nand_info);
pxa168_add_fb(&aspenite_lcd_info);
pxa168_add_keypad(&aspenite_keypad_info);
+ platform_device_register(&pxa168_device_gpio);
/* off-chip devices */
platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index 39f0878..c5d53e0 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -38,6 +38,7 @@
/* on-chip devices */
pxa168_add_uart(2);
+ platform_device_register(&pxa168_device_gpio);
}
MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index 983cfb1..eb07565 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -202,6 +202,7 @@
/* on-chip devices */
mmp2_add_uart(1);
mmp2_add_uart(3);
+ platform_device_register(&mmp2_device_gpio);
mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index a64c172..c1f0aa8 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -110,6 +110,7 @@
/* on-chip devices */
mmp2_add_uart(1);
mmp2_add_uart(2);
+ platform_device_register(&mmp2_device_gpio);
/* off-chip devices */
platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 6915656..933420a 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -184,6 +184,7 @@
pxa168_add_uart(3);
pxa168_add_ssp(0);
pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
+ platform_device_register(&pxa168_device_gpio);
pxa168_add_eth(&gplugd_eth_platform_data);
}
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index 904466d..13219eb 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -3,7 +3,6 @@
#include <asm-generic/gpio.h>
-#define __gpio_is_inverted(gpio) (0)
-#define __gpio_is_occupied(gpio) (0)
+#include <mach/cputype.h>
#endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index 2f7b2d3..cba22fe 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -32,6 +32,8 @@
extern struct pxa_device_desc mmp2_device_asram;
extern struct pxa_device_desc mmp2_device_isram;
+extern struct platform_device mmp2_device_gpio;
+
static inline int mmp2_add_uart(int id)
{
struct pxa_device_desc *d = NULL;
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 7fb568d..f928608 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -42,6 +42,8 @@
/* pdata can be NULL */
int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata);
+extern struct platform_device pxa168_device_gpio;
+
static inline int pxa168_add_uart(int id)
{
struct pxa_device_desc *d = NULL;
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 91be755..4de13ab 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -21,6 +21,8 @@
extern struct pxa_device_desc pxa910_device_pwm4;
extern struct pxa_device_desc pxa910_device_nand;
+extern struct platform_device pxa910_device_gpio;
+
static inline int pxa910_add_uart(int id)
{
struct pxa_device_desc *d = NULL;
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 5dd1d4a..1ed222d 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <asm/hardware/cache-tauros2.h>
@@ -24,7 +25,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mfp.h>
-#include <mach/gpio-pxa.h>
#include <mach/devices.h>
#include <mach/mmp2.h>
@@ -33,8 +33,6 @@
#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
-#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)
-
static struct mfp_addr_map mmp2_addr_map[] __initdata = {
MFP_ADDR_X(GPIO0, GPIO58, 0x54),
@@ -101,12 +99,6 @@
/* enable GPIO clock */
__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);
-
- /* unmask GPIO edge detection for all 6 banks -- APMASKx */
- for (i = 0; i < 6; i++)
- __raw_writel(0xffffffff, APMASK(i));
-
- pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL);
}
void __init mmp2_init_irq(void)
@@ -230,3 +222,21 @@
/* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
+struct resource mmp2_resource_gpio[] = {
+ {
+ .start = 0xd4019000,
+ .end = 0xd4019fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_MMP2_GPIO,
+ .end = IRQ_MMP2_GPIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mmp2_device_gpio = {
+ .name = "pxa-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mmp2_resource_gpio),
+ .resource = mmp2_resource_gpio,
+};
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 76ca15c..fefdfe5 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -13,6 +13,7 @@
#include <linux/list.h>
#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/platform_device.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
@@ -20,7 +21,6 @@
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/irqs.h>
-#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
@@ -43,20 +43,12 @@
MFP_ADDR_END,
};
-#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
-
static void __init pxa168_init_gpio(void)
{
int i;
/* enable GPIO clock */
__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO);
-
- /* unmask GPIO edge detection for all 4 banks - APMASKx */
- for (i = 0; i < 4; i++)
- __raw_writel(0xffffffff, APMASK(i));
-
- pxa_init_gpio(IRQ_PXA168_GPIOX, 0, 127, NULL);
}
void __init pxa168_init_irq(void)
@@ -174,6 +166,25 @@
PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
+struct resource pxa168_resource_gpio[] = {
+ {
+ .start = 0xd4019000,
+ .end = 0xd4019fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PXA168_GPIOX,
+ .end = IRQ_PXA168_GPIOX,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa168_device_gpio = {
+ .name = "pxa-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa168_resource_gpio),
+ .resource = pxa168_resource_gpio,
+};
+
struct resource pxa168_usb_host_resources[] = {
/* USB Host conroller register base */
[0] = {
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 4ebbfbb..7b992ce 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
@@ -19,7 +20,6 @@
#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
-#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/devices.h>
@@ -77,20 +77,12 @@
MFP_ADDR_END,
};
-#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
-
static void __init pxa910_init_gpio(void)
{
int i;
/* enable GPIO clock */
__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO);
-
- /* unmask GPIO edge detection for all 4 banks - APMASKx */
- for (i = 0; i < 4; i++)
- __raw_writel(0xffffffff, APMASK(i));
-
- pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL);
}
void __init pxa910_init_irq(void)
@@ -179,3 +171,22 @@
PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
+
+struct resource pxa910_resource_gpio[] = {
+ {
+ .start = 0xd4019000,
+ .end = 0xd4019fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PXA910_AP_GPIO,
+ .end = IRQ_PXA910_AP_GPIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa910_device_gpio = {
+ .name = "pxa-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa910_resource_gpio),
+ .resource = pxa910_resource_gpio,
+};
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index 331f5f3..bb2ddb7 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -94,6 +94,7 @@
/* on-chip devices */
pxa910_add_uart(1);
+ platform_device_register(&pxa910_device_gpio);
/* off-chip devices */
platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index 825a01c..703de85 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -78,6 +78,7 @@
pxa168_add_uart(1);
pxa168_add_keypad(&teton_bga_keypad_info);
pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
+ platform_device_register(&pxa168_device_gpio);
}
MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index fac0d5d..a80ed26 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -123,6 +123,7 @@
};
static struct platform_device *ttc_dkb_devices[] = {
+ &pxa910_device_gpio,
&ttc_dkb_device_onenand,
};