| /* |
| * Xen time implementation. |
| * |
| * This is implemented in terms of a clocksource driver which uses |
| * the hypervisor clock as a nanosecond timebase, and a clockevent |
| * driver which uses the hypervisor's timer mechanism. |
| * |
| * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007 |
| */ |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/clocksource.h> |
| #include <linux/clockchips.h> |
| |
| #include <asm/xen/hypervisor.h> |
| #include <asm/xen/hypercall.h> |
| |
| #include <xen/events.h> |
| #include <xen/interface/xen.h> |
| #include <xen/interface/vcpu.h> |
| |
| #include "xen-ops.h" |
| |
| #define XEN_SHIFT 22 |
| |
| /* Xen may fire a timer up to this many ns early */ |
| #define TIMER_SLOP 100000 |
| |
| /* These are perodically updated in shared_info, and then copied here. */ |
| struct shadow_time_info { |
| u64 tsc_timestamp; /* TSC at last update of time vals. */ |
| u64 system_timestamp; /* Time, in nanosecs, since boot. */ |
| u32 tsc_to_nsec_mul; |
| int tsc_shift; |
| u32 version; |
| }; |
| |
| static DEFINE_PER_CPU(struct shadow_time_info, shadow_time); |
| |
| unsigned long xen_cpu_khz(void) |
| { |
| u64 cpu_khz = 1000000ULL << 32; |
| const struct vcpu_time_info *info = |
| &HYPERVISOR_shared_info->vcpu_info[0].time; |
| |
| do_div(cpu_khz, info->tsc_to_system_mul); |
| if (info->tsc_shift < 0) |
| cpu_khz <<= -info->tsc_shift; |
| else |
| cpu_khz >>= info->tsc_shift; |
| |
| return cpu_khz; |
| } |
| |
| /* |
| * Reads a consistent set of time-base values from Xen, into a shadow data |
| * area. |
| */ |
| static void get_time_values_from_xen(void) |
| { |
| struct vcpu_time_info *src; |
| struct shadow_time_info *dst; |
| |
| preempt_disable(); |
| |
| /* src is shared memory with the hypervisor, so we need to |
| make sure we get a consistent snapshot, even in the face of |
| being preempted. */ |
| src = &__get_cpu_var(xen_vcpu)->time; |
| dst = &__get_cpu_var(shadow_time); |
| |
| do { |
| dst->version = src->version; |
| rmb(); /* fetch version before data */ |
| dst->tsc_timestamp = src->tsc_timestamp; |
| dst->system_timestamp = src->system_time; |
| dst->tsc_to_nsec_mul = src->tsc_to_system_mul; |
| dst->tsc_shift = src->tsc_shift; |
| rmb(); /* test version after fetching data */ |
| } while ((src->version & 1) | (dst->version ^ src->version)); |
| |
| preempt_enable(); |
| } |
| |
| /* |
| * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction, |
| * yielding a 64-bit result. |
| */ |
| static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift) |
| { |
| u64 product; |
| #ifdef __i386__ |
| u32 tmp1, tmp2; |
| #endif |
| |
| if (shift < 0) |
| delta >>= -shift; |
| else |
| delta <<= shift; |
| |
| #ifdef __i386__ |
| __asm__ ( |
| "mul %5 ; " |
| "mov %4,%%eax ; " |
| "mov %%edx,%4 ; " |
| "mul %5 ; " |
| "xor %5,%5 ; " |
| "add %4,%%eax ; " |
| "adc %5,%%edx ; " |
| : "=A" (product), "=r" (tmp1), "=r" (tmp2) |
| : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); |
| #elif __x86_64__ |
| __asm__ ( |
| "mul %%rdx ; shrd $32,%%rdx,%%rax" |
| : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) ); |
| #else |
| #error implement me! |
| #endif |
| |
| return product; |
| } |
| |
| static u64 get_nsec_offset(struct shadow_time_info *shadow) |
| { |
| u64 now, delta; |
| rdtscll(now); |
| delta = now - shadow->tsc_timestamp; |
| return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift); |
| } |
| |
| cycle_t xen_clocksource_read(void) |
| { |
| struct shadow_time_info *shadow = &get_cpu_var(shadow_time); |
| cycle_t ret; |
| |
| get_time_values_from_xen(); |
| |
| ret = shadow->system_timestamp + get_nsec_offset(shadow); |
| |
| put_cpu_var(shadow_time); |
| |
| return ret; |
| } |
| |
| static void xen_read_wallclock(struct timespec *ts) |
| { |
| const struct shared_info *s = HYPERVISOR_shared_info; |
| u32 version; |
| u64 delta; |
| struct timespec now; |
| |
| /* get wallclock at system boot */ |
| do { |
| version = s->wc_version; |
| rmb(); /* fetch version before time */ |
| now.tv_sec = s->wc_sec; |
| now.tv_nsec = s->wc_nsec; |
| rmb(); /* fetch time before checking version */ |
| } while ((s->wc_version & 1) | (version ^ s->wc_version)); |
| |
| delta = xen_clocksource_read(); /* time since system boot */ |
| delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec; |
| |
| now.tv_nsec = do_div(delta, NSEC_PER_SEC); |
| now.tv_sec = delta; |
| |
| set_normalized_timespec(ts, now.tv_sec, now.tv_nsec); |
| } |
| |
| unsigned long xen_get_wallclock(void) |
| { |
| struct timespec ts; |
| |
| xen_read_wallclock(&ts); |
| |
| return ts.tv_sec; |
| } |
| |
| int xen_set_wallclock(unsigned long now) |
| { |
| /* do nothing for domU */ |
| return -1; |
| } |
| |
| static struct clocksource xen_clocksource __read_mostly = { |
| .name = "xen", |
| .rating = 400, |
| .read = xen_clocksource_read, |
| .mask = ~0, |
| .mult = 1<<XEN_SHIFT, /* time directly in nanoseconds */ |
| .shift = XEN_SHIFT, |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| }; |
| |
| /* |
| Xen clockevent implementation |
| |
| Xen has two clockevent implementations: |
| |
| The old timer_op one works with all released versions of Xen prior |
| to version 3.0.4. This version of the hypervisor provides a |
| single-shot timer with nanosecond resolution. However, sharing the |
| same event channel is a 100Hz tick which is delivered while the |
| vcpu is running. We don't care about or use this tick, but it will |
| cause the core time code to think the timer fired too soon, and |
| will end up resetting it each time. It could be filtered, but |
| doing so has complications when the ktime clocksource is not yet |
| the xen clocksource (ie, at boot time). |
| |
| The new vcpu_op-based timer interface allows the tick timer period |
| to be changed or turned off. The tick timer is not useful as a |
| periodic timer because events are only delivered to running vcpus. |
| The one-shot timer can report when a timeout is in the past, so |
| set_next_event is capable of returning -ETIME when appropriate. |
| This interface is used when available. |
| */ |
| |
| |
| /* |
| Get a hypervisor absolute time. In theory we could maintain an |
| offset between the kernel's time and the hypervisor's time, and |
| apply that to a kernel's absolute timeout. Unfortunately the |
| hypervisor and kernel times can drift even if the kernel is using |
| the Xen clocksource, because ntp can warp the kernel's clocksource. |
| */ |
| static s64 get_abs_timeout(unsigned long delta) |
| { |
| return xen_clocksource_read() + delta; |
| } |
| |
| static void xen_timerop_set_mode(enum clock_event_mode mode, |
| struct clock_event_device *evt) |
| { |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| /* unsupported */ |
| WARN_ON(1); |
| break; |
| |
| case CLOCK_EVT_MODE_ONESHOT: |
| break; |
| |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| HYPERVISOR_set_timer_op(0); /* cancel timeout */ |
| break; |
| } |
| } |
| |
| static int xen_timerop_set_next_event(unsigned long delta, |
| struct clock_event_device *evt) |
| { |
| WARN_ON(evt->mode != CLOCK_EVT_MODE_ONESHOT); |
| |
| if (HYPERVISOR_set_timer_op(get_abs_timeout(delta)) < 0) |
| BUG(); |
| |
| /* We may have missed the deadline, but there's no real way of |
| knowing for sure. If the event was in the past, then we'll |
| get an immediate interrupt. */ |
| |
| return 0; |
| } |
| |
| static const struct clock_event_device xen_timerop_clockevent = { |
| .name = "xen", |
| .features = CLOCK_EVT_FEAT_ONESHOT, |
| |
| .max_delta_ns = 0xffffffff, |
| .min_delta_ns = TIMER_SLOP, |
| |
| .mult = 1, |
| .shift = 0, |
| .rating = 500, |
| |
| .set_mode = xen_timerop_set_mode, |
| .set_next_event = xen_timerop_set_next_event, |
| }; |
| |
| |
| |
| static void xen_vcpuop_set_mode(enum clock_event_mode mode, |
| struct clock_event_device *evt) |
| { |
| int cpu = smp_processor_id(); |
| |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| WARN_ON(1); /* unsupported */ |
| break; |
| |
| case CLOCK_EVT_MODE_ONESHOT: |
| if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL)) |
| BUG(); |
| break; |
| |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| if (HYPERVISOR_vcpu_op(VCPUOP_stop_singleshot_timer, cpu, NULL) || |
| HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL)) |
| BUG(); |
| break; |
| } |
| } |
| |
| static int xen_vcpuop_set_next_event(unsigned long delta, |
| struct clock_event_device *evt) |
| { |
| int cpu = smp_processor_id(); |
| struct vcpu_set_singleshot_timer single; |
| int ret; |
| |
| WARN_ON(evt->mode != CLOCK_EVT_MODE_ONESHOT); |
| |
| single.timeout_abs_ns = get_abs_timeout(delta); |
| single.flags = VCPU_SSHOTTMR_future; |
| |
| ret = HYPERVISOR_vcpu_op(VCPUOP_set_singleshot_timer, cpu, &single); |
| |
| BUG_ON(ret != 0 && ret != -ETIME); |
| |
| return ret; |
| } |
| |
| static const struct clock_event_device xen_vcpuop_clockevent = { |
| .name = "xen", |
| .features = CLOCK_EVT_FEAT_ONESHOT, |
| |
| .max_delta_ns = 0xffffffff, |
| .min_delta_ns = TIMER_SLOP, |
| |
| .mult = 1, |
| .shift = 0, |
| .rating = 500, |
| |
| .set_mode = xen_vcpuop_set_mode, |
| .set_next_event = xen_vcpuop_set_next_event, |
| }; |
| |
| static const struct clock_event_device *xen_clockevent = |
| &xen_timerop_clockevent; |
| static DEFINE_PER_CPU(struct clock_event_device, xen_clock_events); |
| |
| static irqreturn_t xen_timer_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = &__get_cpu_var(xen_clock_events); |
| irqreturn_t ret; |
| |
| ret = IRQ_NONE; |
| if (evt->event_handler) { |
| evt->event_handler(evt); |
| ret = IRQ_HANDLED; |
| } |
| |
| return ret; |
| } |
| |
| static void xen_setup_timer(int cpu) |
| { |
| const char *name; |
| struct clock_event_device *evt; |
| int irq; |
| |
| printk(KERN_INFO "installing Xen timer for CPU %d\n", cpu); |
| |
| name = kasprintf(GFP_KERNEL, "timer%d", cpu); |
| if (!name) |
| name = "<timer kasprintf failed>"; |
| |
| irq = bind_virq_to_irqhandler(VIRQ_TIMER, cpu, xen_timer_interrupt, |
| IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING, |
| name, NULL); |
| |
| evt = &get_cpu_var(xen_clock_events); |
| memcpy(evt, xen_clockevent, sizeof(*evt)); |
| |
| evt->cpumask = cpumask_of_cpu(cpu); |
| evt->irq = irq; |
| clockevents_register_device(evt); |
| |
| put_cpu_var(xen_clock_events); |
| } |
| |
| __init void xen_time_init(void) |
| { |
| int cpu = smp_processor_id(); |
| |
| get_time_values_from_xen(); |
| |
| clocksource_register(&xen_clocksource); |
| |
| if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) { |
| /* Successfully turned off 100hz tick, so we have the |
| vcpuop-based timer interface */ |
| printk(KERN_DEBUG "Xen: using vcpuop timer interface\n"); |
| xen_clockevent = &xen_vcpuop_clockevent; |
| } |
| |
| /* Set initial system time with full resolution */ |
| xen_read_wallclock(&xtime); |
| set_normalized_timespec(&wall_to_monotonic, |
| -xtime.tv_sec, -xtime.tv_nsec); |
| |
| tsc_disable = 0; |
| |
| xen_setup_timer(cpu); |
| } |