ide: merge ->dma_host_{on,off} methods into ->dma_host_set method
Merge ->dma_host_{on,off} methods into ->dma_host_set method
which takes 'int on' argument.
There should be no functionality changes caused by this patch.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 780911e..c9648b1 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -408,23 +408,28 @@
}
/**
- * ide_dma_host_off - Generic DMA kill
+ * ide_dma_host_set - Enable/disable DMA on a host
* @drive: drive to control
*
- * Perform the generic IDE controller DMA off operation. This
- * works for most IDE bus mastering controllers
+ * Enable/disable DMA on an IDE controller following generic
+ * bus-mastering IDE controller behaviour.
*/
-void ide_dma_host_off(ide_drive_t *drive)
+void ide_dma_host_set(ide_drive_t *drive, int on)
{
ide_hwif_t *hwif = HWIF(drive);
u8 unit = (drive->select.b.unit & 0x01);
u8 dma_stat = hwif->INB(hwif->dma_status);
- hwif->OUTB((dma_stat & ~(1<<(5+unit))), hwif->dma_status);
+ if (on)
+ dma_stat |= (1 << (5 + unit));
+ else
+ dma_stat &= ~(1 << (5 + unit));
+
+ hwif->OUTB(dma_stat, hwif->dma_status);
}
-EXPORT_SYMBOL(ide_dma_host_off);
+EXPORT_SYMBOL_GPL(ide_dma_host_set);
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
/**
@@ -439,7 +444,7 @@
drive->using_dma = 0;
ide_toggle_bounce(drive, 0);
- drive->hwif->dma_host_off(drive);
+ drive->hwif->dma_host_set(drive, 0);
}
EXPORT_SYMBOL(ide_dma_off_quietly);
@@ -460,29 +465,6 @@
EXPORT_SYMBOL(ide_dma_off);
-#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
-/**
- * ide_dma_host_on - Enable DMA on a host
- * @drive: drive to enable for DMA
- *
- * Enable DMA on an IDE controller following generic bus mastering
- * IDE controller behaviour
- */
-
-void ide_dma_host_on(ide_drive_t *drive)
-{
- if (1) {
- ide_hwif_t *hwif = HWIF(drive);
- u8 unit = (drive->select.b.unit & 0x01);
- u8 dma_stat = hwif->INB(hwif->dma_status);
-
- hwif->OUTB((dma_stat|(1<<(5+unit))), hwif->dma_status);
- }
-}
-
-EXPORT_SYMBOL(ide_dma_host_on);
-#endif
-
/**
* ide_dma_on - Enable DMA on a device
* @drive: drive to enable DMA on
@@ -495,7 +477,7 @@
drive->using_dma = 1;
ide_toggle_bounce(drive, 1);
- drive->hwif->dma_host_on(drive);
+ drive->hwif->dma_host_set(drive, 1);
}
EXPORT_SYMBOL(ide_dma_on);
@@ -980,10 +962,8 @@
if (!(hwif->dma_prdtable))
hwif->dma_prdtable = (hwif->dma_base + 4);
- if (!hwif->dma_host_off)
- hwif->dma_host_off = &ide_dma_host_off;
- if (!hwif->dma_host_on)
- hwif->dma_host_on = &ide_dma_host_on;
+ if (!hwif->dma_host_set)
+ hwif->dma_host_set = &ide_dma_host_set;
if (!hwif->dma_setup)
hwif->dma_setup = &ide_dma_setup;
if (!hwif->dma_exec_cmd)