ftrace: add basic support for gcc profiler instrumentation
If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is
set to a non-zero value the ftrace routine will be called everytime
we enter a kernel function that is not marked with the "notrace"
attribute.
The ftrace routine will then call a registered function if a function
happens to be registered.
[ This code has been highly hacked by Steven Rostedt and Ingo Molnar,
so don't blame Arnaldo for all of this ;-) ]
Update:
It is now possible to register more than one ftrace function.
If only one ftrace function is registered, that will be the
function that ftrace calls directly. If more than one function
is registered, then ftrace will call a function that will loop
through the functions to call.
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
diff --git a/Makefile b/Makefile
index 20b3235..b4a273f 100644
--- a/Makefile
+++ b/Makefile
@@ -528,6 +528,10 @@
KBUILD_AFLAGS += -gdwarf-2
endif
+ifdef CONFIG_FTRACE
+KBUILD_CFLAGS += -pg
+endif
+
# We trigger additional mismatches with less inlining
ifdef CONFIG_DEBUG_SECTION_MISMATCH
KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index fe361ae..c742dfe 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -23,6 +23,7 @@
select HAVE_OPROFILE
select HAVE_KPROBES
select HAVE_KRETPROBES
+ select HAVE_FTRACE
select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
select HAVE_ARCH_KGDB if !X86_VOYAGER
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 2a609dc..f47b9b5 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -1109,6 +1109,33 @@
#endif /* CONFIG_XEN */
+#ifdef CONFIG_FTRACE
+ENTRY(mcount)
+ cmpl $ftrace_stub, ftrace_trace_function
+ jnz trace
+
+.globl ftrace_stub
+ftrace_stub:
+ ret
+
+ /* taken from glibc */
+trace:
+ pushl %eax
+ pushl %ecx
+ pushl %edx
+ movl 0xc(%esp), %eax
+ movl 0x4(%ebp), %edx
+
+ call *ftrace_trace_function
+
+ popl %edx
+ popl %ecx
+ popl %eax
+
+ jmp ftrace_stub
+END(mcount)
+#endif
+
.section .rodata,"a"
#include "syscall_table_32.S"
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 556a8df..f046e0c 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -54,6 +54,43 @@
.code64
+#ifdef CONFIG_FTRACE
+ENTRY(mcount)
+ cmpq $ftrace_stub, ftrace_trace_function
+ jnz trace
+.globl ftrace_stub
+ftrace_stub:
+ retq
+
+trace:
+ /* taken from glibc */
+ subq $0x38, %rsp
+ movq %rax, (%rsp)
+ movq %rcx, 8(%rsp)
+ movq %rdx, 16(%rsp)
+ movq %rsi, 24(%rsp)
+ movq %rdi, 32(%rsp)
+ movq %r8, 40(%rsp)
+ movq %r9, 48(%rsp)
+
+ movq 0x38(%rsp), %rdi
+ movq 8(%rbp), %rsi
+
+ call *ftrace_trace_function
+
+ movq 48(%rsp), %r9
+ movq 40(%rsp), %r8
+ movq 32(%rsp), %rdi
+ movq 24(%rsp), %rsi
+ movq 16(%rsp), %rdx
+ movq 8(%rsp), %rcx
+ movq (%rsp), %rax
+ addq $0x38, %rsp
+
+ jmp ftrace_stub
+END(mcount)
+#endif
+
#ifndef CONFIG_PREEMPT
#define retint_kernel retint_restore_args
#endif
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
new file mode 100644
index 0000000..b96ef14
--- /dev/null
+++ b/include/linux/ftrace.h
@@ -0,0 +1,38 @@
+#ifndef _LINUX_FTRACE_H
+#define _LINUX_FTRACE_H
+
+#ifdef CONFIG_FTRACE
+
+#include <linux/linkage.h>
+
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)__builtin_return_address(1))
+#define CALLER_ADDR2 ((unsigned long)__builtin_return_address(2))
+
+typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip);
+
+struct ftrace_ops {
+ ftrace_func_t func;
+ struct ftrace_ops *next;
+};
+
+/*
+ * The ftrace_ops must be a static and should also
+ * be read_mostly. These functions do modify read_mostly variables
+ * so use them sparely. Never free an ftrace_op or modify the
+ * next pointer after it has been registered. Even after unregistering
+ * it, the next pointer may still be used internally.
+ */
+int register_ftrace_function(struct ftrace_ops *ops);
+int unregister_ftrace_function(struct ftrace_ops *ops);
+void clear_ftrace_function(void);
+
+extern void ftrace_stub(unsigned long a0, unsigned long a1);
+extern void mcount(void);
+
+#else /* !CONFIG_FTRACE */
+# define register_ftrace_function(ops) do { } while (0)
+# define unregister_ftrace_function(ops) do { } while (0)
+# define clear_ftrace_function(ops) do { } while (0)
+#endif /* CONFIG_FTRACE */
+#endif /* _LINUX_FTRACE_H */
diff --git a/kernel/Makefile b/kernel/Makefile
index 1c9938a..fa05f6d 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -69,6 +69,7 @@
obj-$(CONFIG_TASKSTATS) += taskstats.o tsacct.o
obj-$(CONFIG_MARKERS) += marker.o
obj-$(CONFIG_LATENCYTOP) += latencytop.o
+obj-$(CONFIG_FTRACE) += trace/
ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y)
# According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
new file mode 100644
index 0000000..8185c91
--- /dev/null
+++ b/kernel/trace/Kconfig
@@ -0,0 +1,5 @@
+#
+# Architectures that offer an FTRACE implementation should select HAVE_FTRACE:
+#
+config HAVE_FTRACE
+ bool
diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile
new file mode 100644
index 0000000..bf4fd21
--- /dev/null
+++ b/kernel/trace/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_FTRACE) += libftrace.o
+
+libftrace-y := ftrace.o
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
new file mode 100644
index 0000000..b6a80b9
--- /dev/null
+++ b/kernel/trace/ftrace.c
@@ -0,0 +1,138 @@
+/*
+ * Infrastructure for profiling code inserted by 'gcc -pg'.
+ *
+ * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
+ * Copyright (C) 2004-2008 Ingo Molnar <mingo@redhat.com>
+ *
+ * Originally ported from the -rt patch by:
+ * Copyright (C) 2007 Arnaldo Carvalho de Melo <acme@redhat.com>
+ *
+ * Based on code in the latency_tracer, that is:
+ *
+ * Copyright (C) 2004-2006 Ingo Molnar
+ * Copyright (C) 2004 William Lee Irwin III
+ */
+
+#include <linux/module.h>
+#include <linux/ftrace.h>
+
+static DEFINE_SPINLOCK(ftrace_func_lock);
+static struct ftrace_ops ftrace_list_end __read_mostly =
+{
+ .func = ftrace_stub,
+};
+
+static struct ftrace_ops *ftrace_list __read_mostly = &ftrace_list_end;
+ftrace_func_t ftrace_trace_function __read_mostly = ftrace_stub;
+
+/* mcount is defined per arch in assembly */
+EXPORT_SYMBOL(mcount);
+
+notrace void ftrace_list_func(unsigned long ip, unsigned long parent_ip)
+{
+ struct ftrace_ops *op = ftrace_list;
+
+ /* in case someone actually ports this to alpha! */
+ read_barrier_depends();
+
+ while (op != &ftrace_list_end) {
+ /* silly alpha */
+ read_barrier_depends();
+ op->func(ip, parent_ip);
+ op = op->next;
+ };
+}
+
+/**
+ * register_ftrace_function - register a function for profiling
+ * @ops - ops structure that holds the function for profiling.
+ *
+ * Register a function to be called by all functions in the
+ * kernel.
+ *
+ * Note: @ops->func and all the functions it calls must be labeled
+ * with "notrace", otherwise it will go into a
+ * recursive loop.
+ */
+int register_ftrace_function(struct ftrace_ops *ops)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ftrace_func_lock, flags);
+ ops->next = ftrace_list;
+ /*
+ * We are entering ops into the ftrace_list but another
+ * CPU might be walking that list. We need to make sure
+ * the ops->next pointer is valid before another CPU sees
+ * the ops pointer included into the ftrace_list.
+ */
+ smp_wmb();
+ ftrace_list = ops;
+ /*
+ * For one func, simply call it directly.
+ * For more than one func, call the chain.
+ */
+ if (ops->next == &ftrace_list_end)
+ ftrace_trace_function = ops->func;
+ else
+ ftrace_trace_function = ftrace_list_func;
+ spin_unlock_irqrestore(&ftrace_func_lock, flags);
+
+ return 0;
+}
+
+/**
+ * unregister_ftrace_function - unresgister a function for profiling.
+ * @ops - ops structure that holds the function to unregister
+ *
+ * Unregister a function that was added to be called by ftrace profiling.
+ */
+int unregister_ftrace_function(struct ftrace_ops *ops)
+{
+ unsigned long flags;
+ struct ftrace_ops **p;
+ int ret = 0;
+
+ spin_lock_irqsave(&ftrace_func_lock, flags);
+
+ /*
+ * If we are the only function, then the ftrace pointer is
+ * pointing directly to that function.
+ */
+ if (ftrace_list == ops && ops->next == &ftrace_list_end) {
+ ftrace_trace_function = ftrace_stub;
+ ftrace_list = &ftrace_list_end;
+ goto out;
+ }
+
+ for (p = &ftrace_list; *p != &ftrace_list_end; p = &(*p)->next)
+ if (*p == ops)
+ break;
+
+ if (*p != ops) {
+ ret = -1;
+ goto out;
+ }
+
+ *p = (*p)->next;
+
+ /* If we only have one func left, then call that directly */
+ if (ftrace_list->next == &ftrace_list_end)
+ ftrace_trace_function = ftrace_list->func;
+
+ out:
+ spin_unlock_irqrestore(&ftrace_func_lock, flags);
+
+ return 0;
+}
+
+/**
+ * clear_ftrace_function - reset the ftrace function
+ *
+ * This NULLs the ftrace function and in essence stops
+ * tracing. There may be lag
+ */
+void clear_ftrace_function(void)
+{
+ ftrace_trace_function = ftrace_stub;
+}
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index d2099f4..d8b6279 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -634,6 +634,8 @@
Enable this option if you want to use the LatencyTOP tool
to find out which userspace is blocking on what kernel operations.
+source kernel/trace/Kconfig
+
config PROVIDE_OHCI1394_DMA_INIT
bool "Remote debugging over FireWire early on boot"
depends on PCI && X86