Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc:
[MMC] sdhci: version bump sdhci
[MMC] sdhci: support controller specific quirks
[MMC] sdhci: more DMA capabilities tests
[MMC] sdhci: reset sdhci controller early
[MMC] sdhci: check controller version
[MMC] sdhci: check only relevant inhibit bits
[MMC] sdhci: Test for invalid block size
[MMC] sdhci: Avoid sdhci DMA boundaries
[MMC] Fix sdhci PIO routines
[MMC] sdhci: fix interrupt handling
[MMC] sdhci: correct register order
[MMC] sdhci: proper timeout handling
[MMC] sdhci: fix sdhci reset timeout
[MMC] sdhci: fix timeout loops in sdhci
[MMC] sdhci: support for multiple voltages
[MMC] sdhci: print device id
[MMC] sdhci: check SDHCI base clock
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index a871c09..7413469 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -8,12 +8,6 @@
* published by the Free Software Foundation.
*/
- /*
- * Note that PIO transfer is rather crappy atm. The buffer full/empty
- * interrupts aren't reliable so we currently transfer the entire buffer
- * directly. Patches to solve the problem are welcome.
- */
-
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/pci.h>
@@ -27,13 +21,17 @@
#include "sdhci.h"
#define DRIVER_NAME "sdhci"
-#define DRIVER_VERSION "0.11"
+#define DRIVER_VERSION "0.12"
#define BUGMAIL "<sdhci-devel@list.drzeus.cx>"
#define DBG(f, x...) \
pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
+static unsigned int debug_nodma = 0;
+static unsigned int debug_forcedma = 0;
+static unsigned int debug_quirks = 0;
+
static const struct pci_device_id pci_ids[] __devinitdata = {
/* handle any SD host controller */
{PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)},
@@ -94,12 +92,27 @@
static void sdhci_reset(struct sdhci_host *host, u8 mask)
{
+ unsigned long timeout;
+
writeb(mask, host->ioaddr + SDHCI_SOFTWARE_RESET);
- if (mask & SDHCI_RESET_ALL) {
+ if (mask & SDHCI_RESET_ALL)
host->clock = 0;
- mdelay(50);
+ /* Wait max 100 ms */
+ timeout = 100;
+
+ /* hw clears the bit when it's done */
+ while (readb(host->ioaddr + SDHCI_SOFTWARE_RESET) & mask) {
+ if (timeout == 0) {
+ printk(KERN_ERR "%s: Reset 0x%x never completed. "
+ "Please report this to " BUGMAIL ".\n",
+ mmc_hostname(host->mmc), (int)mask);
+ sdhci_dumpregs(host);
+ return;
+ }
+ timeout--;
+ mdelay(1);
}
}
@@ -109,13 +122,15 @@
sdhci_reset(host, SDHCI_RESET_ALL);
- intmask = ~(SDHCI_INT_CARD_INT | SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
+ intmask = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
+ SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
+ SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
+ SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT |
+ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL |
+ SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE;
writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
- /* This is unknown magic. */
- writeb(0xE, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
}
static void sdhci_activate_led(struct sdhci_host *host)
@@ -172,79 +187,46 @@
return host->num_sg;
}
-static void sdhci_transfer_pio(struct sdhci_host *host)
+static void sdhci_read_block_pio(struct sdhci_host *host)
{
+ int blksize, chunk_remain;
+ u32 data;
char *buffer;
- u32 mask;
- int bytes, size;
- unsigned long max_jiffies;
+ int size;
- BUG_ON(!host->data);
+ DBG("PIO reading\n");
- if (host->num_sg == 0)
- return;
-
- bytes = 0;
- if (host->data->flags & MMC_DATA_READ)
- mask = SDHCI_DATA_AVAILABLE;
- else
- mask = SDHCI_SPACE_AVAILABLE;
+ blksize = host->data->blksz;
+ chunk_remain = 0;
+ data = 0;
buffer = sdhci_kmap_sg(host) + host->offset;
- /* Transfer shouldn't take more than 5 s */
- max_jiffies = jiffies + HZ * 5;
-
- while (host->size > 0) {
- if (time_after(jiffies, max_jiffies)) {
- printk(KERN_ERR "%s: PIO transfer stalled. "
- "Please report this to "
- BUGMAIL ".\n", mmc_hostname(host->mmc));
- sdhci_dumpregs(host);
-
- sdhci_kunmap_sg(host);
-
- host->data->error = MMC_ERR_FAILED;
- sdhci_finish_data(host);
- return;
+ while (blksize) {
+ if (chunk_remain == 0) {
+ data = readl(host->ioaddr + SDHCI_BUFFER);
+ chunk_remain = min(blksize, 4);
}
- if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask))
- continue;
-
size = min(host->size, host->remain);
+ size = min(size, chunk_remain);
- if (size >= 4) {
- if (host->data->flags & MMC_DATA_READ)
- *(u32*)buffer = readl(host->ioaddr + SDHCI_BUFFER);
- else
- writel(*(u32*)buffer, host->ioaddr + SDHCI_BUFFER);
- size = 4;
- } else if (size >= 2) {
- if (host->data->flags & MMC_DATA_READ)
- *(u16*)buffer = readw(host->ioaddr + SDHCI_BUFFER);
- else
- writew(*(u16*)buffer, host->ioaddr + SDHCI_BUFFER);
- size = 2;
- } else {
- if (host->data->flags & MMC_DATA_READ)
- *(u8*)buffer = readb(host->ioaddr + SDHCI_BUFFER);
- else
- writeb(*(u8*)buffer, host->ioaddr + SDHCI_BUFFER);
- size = 1;
- }
-
- buffer += size;
+ chunk_remain -= size;
+ blksize -= size;
host->offset += size;
host->remain -= size;
-
- bytes += size;
host->size -= size;
+ while (size) {
+ *buffer = data & 0xFF;
+ buffer++;
+ data >>= 8;
+ size--;
+ }
if (host->remain == 0) {
sdhci_kunmap_sg(host);
if (sdhci_next_sg(host) == 0) {
- DBG("PIO transfer: %d bytes\n", bytes);
+ BUG_ON(blksize != 0);
return;
}
buffer = sdhci_kmap_sg(host);
@@ -252,38 +234,137 @@
}
sdhci_kunmap_sg(host);
+}
- DBG("PIO transfer: %d bytes\n", bytes);
+static void sdhci_write_block_pio(struct sdhci_host *host)
+{
+ int blksize, chunk_remain;
+ u32 data;
+ char *buffer;
+ int bytes, size;
+
+ DBG("PIO writing\n");
+
+ blksize = host->data->blksz;
+ chunk_remain = 4;
+ data = 0;
+
+ bytes = 0;
+ buffer = sdhci_kmap_sg(host) + host->offset;
+
+ while (blksize) {
+ size = min(host->size, host->remain);
+ size = min(size, chunk_remain);
+
+ chunk_remain -= size;
+ blksize -= size;
+ host->offset += size;
+ host->remain -= size;
+ host->size -= size;
+ while (size) {
+ data >>= 8;
+ data |= (u32)*buffer << 24;
+ buffer++;
+ size--;
+ }
+
+ if (chunk_remain == 0) {
+ writel(data, host->ioaddr + SDHCI_BUFFER);
+ chunk_remain = min(blksize, 4);
+ }
+
+ if (host->remain == 0) {
+ sdhci_kunmap_sg(host);
+ if (sdhci_next_sg(host) == 0) {
+ BUG_ON(blksize != 0);
+ return;
+ }
+ buffer = sdhci_kmap_sg(host);
+ }
+ }
+
+ sdhci_kunmap_sg(host);
+}
+
+static void sdhci_transfer_pio(struct sdhci_host *host)
+{
+ u32 mask;
+
+ BUG_ON(!host->data);
+
+ if (host->size == 0)
+ return;
+
+ if (host->data->flags & MMC_DATA_READ)
+ mask = SDHCI_DATA_AVAILABLE;
+ else
+ mask = SDHCI_SPACE_AVAILABLE;
+
+ while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
+ if (host->data->flags & MMC_DATA_READ)
+ sdhci_read_block_pio(host);
+ else
+ sdhci_write_block_pio(host);
+
+ if (host->size == 0)
+ break;
+
+ BUG_ON(host->num_sg == 0);
+ }
+
+ DBG("PIO transfer complete.\n");
}
static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
{
- u16 mode;
+ u8 count;
+ unsigned target_timeout, current_timeout;
WARN_ON(host->data);
- if (data == NULL) {
- writew(0, host->ioaddr + SDHCI_TRANSFER_MODE);
+ if (data == NULL)
return;
- }
DBG("blksz %04x blks %04x flags %08x\n",
data->blksz, data->blocks, data->flags);
DBG("tsac %d ms nsac %d clk\n",
data->timeout_ns / 1000000, data->timeout_clks);
- mode = SDHCI_TRNS_BLK_CNT_EN;
- if (data->blocks > 1)
- mode |= SDHCI_TRNS_MULTI;
- if (data->flags & MMC_DATA_READ)
- mode |= SDHCI_TRNS_READ;
- if (host->flags & SDHCI_USE_DMA)
- mode |= SDHCI_TRNS_DMA;
+ /* Sanity checks */
+ BUG_ON(data->blksz * data->blocks > 524288);
+ BUG_ON(data->blksz > host->max_block);
+ BUG_ON(data->blocks > 65535);
- writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
+ /* timeout in us */
+ target_timeout = data->timeout_ns / 1000 +
+ data->timeout_clks / host->clock;
- writew(data->blksz, host->ioaddr + SDHCI_BLOCK_SIZE);
- writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT);
+ /*
+ * Figure out needed cycles.
+ * We do this in steps in order to fit inside a 32 bit int.
+ * The first step is the minimum timeout, which will have a
+ * minimum resolution of 6 bits:
+ * (1) 2^13*1000 > 2^22,
+ * (2) host->timeout_clk < 2^16
+ * =>
+ * (1) / (2) > 2^6
+ */
+ count = 0;
+ current_timeout = (1 << 13) * 1000 / host->timeout_clk;
+ while (current_timeout < target_timeout) {
+ count++;
+ current_timeout <<= 1;
+ if (count >= 0xF)
+ break;
+ }
+
+ if (count >= 0xF) {
+ printk(KERN_WARNING "%s: Too large timeout requested!\n",
+ mmc_hostname(host->mmc));
+ count = 0xE;
+ }
+
+ writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
if (host->flags & SDHCI_USE_DMA) {
int count;
@@ -302,12 +383,37 @@
host->offset = 0;
host->remain = host->cur_sg->length;
}
+
+ /* We do not handle DMA boundaries, so set it to max (512 KiB) */
+ writew(SDHCI_MAKE_BLKSZ(7, data->blksz),
+ host->ioaddr + SDHCI_BLOCK_SIZE);
+ writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT);
+}
+
+static void sdhci_set_transfer_mode(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+ u16 mode;
+
+ WARN_ON(host->data);
+
+ if (data == NULL)
+ return;
+
+ mode = SDHCI_TRNS_BLK_CNT_EN;
+ if (data->blocks > 1)
+ mode |= SDHCI_TRNS_MULTI;
+ if (data->flags & MMC_DATA_READ)
+ mode |= SDHCI_TRNS_READ;
+ if (host->flags & SDHCI_USE_DMA)
+ mode |= SDHCI_TRNS_DMA;
+
+ writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
}
static void sdhci_finish_data(struct sdhci_host *host)
{
struct mmc_data *data;
- u32 intmask;
u16 blocks;
BUG_ON(!host->data);
@@ -318,14 +424,6 @@
if (host->flags & SDHCI_USE_DMA) {
pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len,
(data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
- } else {
- intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
- intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
- writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
- intmask = readl(host->ioaddr + SDHCI_INT_ENABLE);
- intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
- writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
}
/*
@@ -371,27 +469,38 @@
static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
{
int flags;
- u32 present;
- unsigned long max_jiffies;
+ u32 mask;
+ unsigned long timeout;
WARN_ON(host->cmd);
DBG("Sending cmd (%x)\n", cmd->opcode);
/* Wait max 10 ms */
- max_jiffies = jiffies + (HZ + 99)/100;
- do {
- if (time_after(jiffies, max_jiffies)) {
+ timeout = 10;
+
+ mask = SDHCI_CMD_INHIBIT;
+ if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
+ mask |= SDHCI_DATA_INHIBIT;
+
+ /* We shouldn't wait for data inihibit for stop commands, even
+ though they might use busy signaling */
+ if (host->mrq->data && (cmd == host->mrq->data->stop))
+ mask &= ~SDHCI_DATA_INHIBIT;
+
+ while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
+ if (timeout == 0) {
printk(KERN_ERR "%s: Controller never released "
- "inhibit bits. Please report this to "
+ "inhibit bit(s). Please report this to "
BUGMAIL ".\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
cmd->error = MMC_ERR_FAILED;
tasklet_schedule(&host->finish_tasklet);
return;
}
- present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
- } while (present & (SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT));
+ timeout--;
+ mdelay(1);
+ }
mod_timer(&host->timer, jiffies + 10 * HZ);
@@ -401,6 +510,8 @@
writel(cmd->arg, host->ioaddr + SDHCI_ARGUMENT);
+ sdhci_set_transfer_mode(host, cmd->data);
+
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
printk(KERN_ERR "%s: Unsupported response type! "
"Please report this to " BUGMAIL ".\n",
@@ -456,31 +567,9 @@
DBG("Ending cmd (%x)\n", host->cmd->opcode);
- if (host->cmd->data) {
- u32 intmask;
-
+ if (host->cmd->data)
host->data = host->cmd->data;
-
- if (!(host->flags & SDHCI_USE_DMA)) {
- /*
- * Don't enable the interrupts until now to make sure we
- * get stable handling of the FIFO.
- */
- intmask = readl(host->ioaddr + SDHCI_INT_ENABLE);
- intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL;
- writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
-
- intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
- intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL;
- writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
- /*
- * The buffer interrupts are to unreliable so we
- * start the transfer immediatly.
- */
- sdhci_transfer_pio(host);
- }
- } else
+ else
tasklet_schedule(&host->finish_tasklet);
host->cmd = NULL;
@@ -490,7 +579,7 @@
{
int div;
u16 clk;
- unsigned long max_jiffies;
+ unsigned long timeout;
if (clock == host->clock)
return;
@@ -511,17 +600,19 @@
writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
/* Wait max 10 ms */
- max_jiffies = jiffies + (HZ + 99)/100;
- do {
- if (time_after(jiffies, max_jiffies)) {
+ timeout = 10;
+ while (!((clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL))
+ & SDHCI_CLOCK_INT_STABLE)) {
+ if (timeout == 0) {
printk(KERN_ERR "%s: Internal clock never stabilised. "
"Please report this to " BUGMAIL ".\n",
mmc_hostname(host->mmc));
sdhci_dumpregs(host);
return;
}
- clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL);
- } while (!(clk & SDHCI_CLOCK_INT_STABLE));
+ timeout--;
+ mdelay(1);
+ }
clk |= SDHCI_CLOCK_CARD_EN;
writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
@@ -530,6 +621,46 @@
host->clock = clock;
}
+static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
+{
+ u8 pwr;
+
+ if (host->power == power)
+ return;
+
+ writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
+
+ if (power == (unsigned short)-1)
+ goto out;
+
+ pwr = SDHCI_POWER_ON;
+
+ switch (power) {
+ case MMC_VDD_170:
+ case MMC_VDD_180:
+ case MMC_VDD_190:
+ pwr |= SDHCI_POWER_180;
+ break;
+ case MMC_VDD_290:
+ case MMC_VDD_300:
+ case MMC_VDD_310:
+ pwr |= SDHCI_POWER_300;
+ break;
+ case MMC_VDD_320:
+ case MMC_VDD_330:
+ case MMC_VDD_340:
+ pwr |= SDHCI_POWER_330;
+ break;
+ default:
+ BUG();
+ }
+
+ writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
+
+out:
+ host->power = power;
+}
+
/*****************************************************************************\
* *
* MMC callbacks *
@@ -576,17 +707,15 @@
*/
if (ios->power_mode == MMC_POWER_OFF) {
writel(0, host->ioaddr + SDHCI_SIGNAL_ENABLE);
- spin_unlock_irqrestore(&host->lock, flags);
sdhci_init(host);
- spin_lock_irqsave(&host->lock, flags);
}
sdhci_set_clock(host, ios->clock);
if (ios->power_mode == MMC_POWER_OFF)
- writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
+ sdhci_set_power(host, -1);
else
- writeb(0xFF, host->ioaddr + SDHCI_POWER_CONTROL);
+ sdhci_set_power(host, ios->vdd);
ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
if (ios->bus_width == MMC_BUS_WIDTH_4)
@@ -793,7 +922,7 @@
if (host->data->error != MMC_ERR_NONE)
sdhci_finish_data(host);
else {
- if (intmask & (SDHCI_INT_BUF_FULL | SDHCI_INT_BUF_EMPTY))
+ if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
sdhci_transfer_pio(host);
if (intmask & SDHCI_INT_DATA_END)
@@ -818,50 +947,44 @@
DBG("*** %s got interrupt: 0x%08x\n", host->slot_descr, intmask);
- if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE))
+ if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
+ writel(intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE),
+ host->ioaddr + SDHCI_INT_STATUS);
tasklet_schedule(&host->card_tasklet);
+ }
+
+ intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
if (intmask & SDHCI_INT_CMD_MASK) {
- sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
-
writel(intmask & SDHCI_INT_CMD_MASK,
host->ioaddr + SDHCI_INT_STATUS);
+ sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
}
if (intmask & SDHCI_INT_DATA_MASK) {
- sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
-
writel(intmask & SDHCI_INT_DATA_MASK,
host->ioaddr + SDHCI_INT_STATUS);
+ sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
}
intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
- if (intmask & SDHCI_INT_CARD_INT) {
- printk(KERN_ERR "%s: Unexpected card interrupt. Please "
- "report this to " BUGMAIL ".\n",
- mmc_hostname(host->mmc));
- sdhci_dumpregs(host);
- }
-
if (intmask & SDHCI_INT_BUS_POWER) {
- printk(KERN_ERR "%s: Unexpected bus power interrupt. Please "
- "report this to " BUGMAIL ".\n",
+ printk(KERN_ERR "%s: Card is consuming too much power!\n",
mmc_hostname(host->mmc));
- sdhci_dumpregs(host);
+ writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS);
}
- if (intmask & SDHCI_INT_ACMD12ERR) {
- printk(KERN_ERR "%s: Unexpected auto CMD12 error. Please "
+ intmask &= SDHCI_INT_BUS_POWER;
+
+ if (intmask) {
+ printk(KERN_ERR "%s: Unexpected interrupt 0x%08x. Please "
"report this to " BUGMAIL ".\n",
- mmc_hostname(host->mmc));
+ mmc_hostname(host->mmc), intmask);
sdhci_dumpregs(host);
- writew(~0, host->ioaddr + SDHCI_ACMD12_ERR);
- }
-
- if (intmask)
writel(intmask, host->ioaddr + SDHCI_INT_STATUS);
+ }
result = IRQ_HANDLED;
@@ -954,6 +1077,7 @@
static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
{
int ret;
+ unsigned int version;
struct sdhci_chip *chip;
struct mmc_host *mmc;
struct sdhci_host *host;
@@ -985,6 +1109,16 @@
return -ENODEV;
}
+ if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
+ printk(KERN_ERR DRIVER_NAME ": Vendor specific interface. Aborting.\n");
+ return -ENODEV;
+ }
+
+ if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) {
+ printk(KERN_ERR DRIVER_NAME ": Unknown interface. Aborting.\n");
+ return -ENODEV;
+ }
+
mmc = mmc_alloc_host(sizeof(struct sdhci_host), &pdev->dev);
if (!mmc)
return -ENOMEM;
@@ -1012,9 +1146,30 @@
goto release;
}
+ sdhci_reset(host, SDHCI_RESET_ALL);
+
+ version = readw(host->ioaddr + SDHCI_HOST_VERSION);
+ version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
+ if (version != 0) {
+ printk(KERN_ERR "%s: Unknown controller version (%d). "
+ "Cowardly refusing to continue.\n", host->slot_descr,
+ version);
+ ret = -ENODEV;
+ goto unmap;
+ }
+
caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
- if ((caps & SDHCI_CAN_DO_DMA) && ((pdev->class & 0x0000FF) == 0x01))
+ if (debug_nodma)
+ DBG("DMA forced off\n");
+ else if (debug_forcedma) {
+ DBG("DMA forced on\n");
+ host->flags |= SDHCI_USE_DMA;
+ } else if ((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA)
+ DBG("Controller doesn't have DMA interface\n");
+ else if (!(caps & SDHCI_CAN_DO_DMA))
+ DBG("Controller doesn't have DMA capability\n");
+ else
host->flags |= SDHCI_USE_DMA;
if (host->flags & SDHCI_USE_DMA) {
@@ -1030,18 +1185,59 @@
else /* XXX: Hack to get MMC layer to avoid highmem */
pdev->dma_mask = 0;
- host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
+ host->max_clk =
+ (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
+ if (host->max_clk == 0) {
+ printk(KERN_ERR "%s: Hardware doesn't specify base clock "
+ "frequency.\n", host->slot_descr);
+ ret = -ENODEV;
+ goto unmap;
+ }
host->max_clk *= 1000000;
+ host->timeout_clk =
+ (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
+ if (host->timeout_clk == 0) {
+ printk(KERN_ERR "%s: Hardware doesn't specify timeout clock "
+ "frequency.\n", host->slot_descr);
+ ret = -ENODEV;
+ goto unmap;
+ }
+ if (caps & SDHCI_TIMEOUT_CLK_UNIT)
+ host->timeout_clk *= 1000;
+
+ host->max_block = (caps & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT;
+ if (host->max_block >= 3) {
+ printk(KERN_ERR "%s: Invalid maximum block size.\n",
+ host->slot_descr);
+ ret = -ENODEV;
+ goto unmap;
+ }
+ host->max_block = 512 << host->max_block;
+
/*
* Set host parameters.
*/
mmc->ops = &sdhci_ops;
mmc->f_min = host->max_clk / 256;
mmc->f_max = host->max_clk;
- mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->ocr_avail = 0;
+ if (caps & SDHCI_CAN_VDD_330)
+ mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
+ else if (caps & SDHCI_CAN_VDD_300)
+ mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31;
+ else if (caps & SDHCI_CAN_VDD_180)
+ mmc->ocr_avail |= MMC_VDD_17_18|MMC_VDD_18_19;
+
+ if (mmc->ocr_avail == 0) {
+ printk(KERN_ERR "%s: Hardware doesn't report any "
+ "support voltages.\n", host->slot_descr);
+ ret = -ENODEV;
+ goto unmap;
+ }
+
spin_lock_init(&host->lock);
/*
@@ -1054,10 +1250,10 @@
mmc->max_phys_segs = 16;
/*
- * Maximum number of sectors in one transfer. Limited by sector
- * count register.
+ * Maximum number of sectors in one transfer. Limited by DMA boundary
+ * size (512KiB), which means (512 KiB/512=) 1024 entries.
*/
- mmc->max_sectors = 0x3FFF;
+ mmc->max_sectors = 1024;
/*
* Maximum segment size. Could be one segment with the maximum number
@@ -1078,7 +1274,7 @@
ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
host->slot_descr, host);
if (ret)
- goto unmap;
+ goto untasklet;
sdhci_init(host);
@@ -1097,10 +1293,10 @@
return 0;
-unmap:
+untasklet:
tasklet_kill(&host->card_tasklet);
tasklet_kill(&host->finish_tasklet);
-
+unmap:
iounmap(host->ioaddr);
release:
pci_release_region(pdev, host->bar);
@@ -1144,13 +1340,18 @@
const struct pci_device_id *ent)
{
int ret, i;
- u8 slots;
+ u8 slots, rev;
struct sdhci_chip *chip;
BUG_ON(pdev == NULL);
BUG_ON(ent == NULL);
- DBG("found at %s\n", pci_name(pdev));
+ pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev);
+
+ printk(KERN_INFO DRIVER_NAME
+ ": SDHCI controller found at %s [%04x:%04x] (rev %x)\n",
+ pci_name(pdev), (int)pdev->vendor, (int)pdev->device,
+ (int)rev);
ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots);
if (ret)
@@ -1173,6 +1374,10 @@
}
chip->pdev = pdev;
+ chip->quirks = ent->driver_data;
+
+ if (debug_quirks)
+ chip->quirks = debug_quirks;
chip->num_slots = slots;
pci_set_drvdata(pdev, chip);
@@ -1251,7 +1456,15 @@
module_init(sdhci_drv_init);
module_exit(sdhci_drv_exit);
+module_param(debug_nodma, uint, 0444);
+module_param(debug_forcedma, uint, 0444);
+module_param(debug_quirks, uint, 0444);
+
MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
MODULE_DESCRIPTION("Secure Digital Host Controller Interface driver");
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
+
+MODULE_PARM_DESC(debug_nodma, "Forcefully disable DMA transfers. (default 0)");
+MODULE_PARM_DESC(debug_forcedma, "Forcefully enable DMA transfers. (default 0)");
+MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
diff --git a/drivers/mmc/sdhci.h b/drivers/mmc/sdhci.h
index 3b270ef..f245334 100644
--- a/drivers/mmc/sdhci.h
+++ b/drivers/mmc/sdhci.h
@@ -12,6 +12,10 @@
* PCI registers
*/
+#define PCI_SDHCI_IFPIO 0x00
+#define PCI_SDHCI_IFDMA 0x01
+#define PCI_SDHCI_IFVENDOR 0x02
+
#define PCI_SLOT_INFO 0x40 /* 8 bits */
#define PCI_SLOT_INFO_SLOTS(x) ((x >> 4) & 7)
#define PCI_SLOT_INFO_FIRST_BAR_MASK 0x07
@@ -23,6 +27,7 @@
#define SDHCI_DMA_ADDRESS 0x00
#define SDHCI_BLOCK_SIZE 0x04
+#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
#define SDHCI_BLOCK_COUNT 0x06
@@ -67,6 +72,10 @@
#define SDHCI_CTRL_4BITBUS 0x02
#define SDHCI_POWER_CONTROL 0x29
+#define SDHCI_POWER_ON 0x01
+#define SDHCI_POWER_180 0x0A
+#define SDHCI_POWER_300 0x0C
+#define SDHCI_POWER_330 0x0E
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
@@ -91,8 +100,8 @@
#define SDHCI_INT_RESPONSE 0x00000001
#define SDHCI_INT_DATA_END 0x00000002
#define SDHCI_INT_DMA_END 0x00000008
-#define SDHCI_INT_BUF_EMPTY 0x00000010
-#define SDHCI_INT_BUF_FULL 0x00000020
+#define SDHCI_INT_SPACE_AVAIL 0x00000010
+#define SDHCI_INT_DATA_AVAIL 0x00000020
#define SDHCI_INT_CARD_INSERT 0x00000040
#define SDHCI_INT_CARD_REMOVE 0x00000080
#define SDHCI_INT_CARD_INT 0x00000100
@@ -112,7 +121,7 @@
#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
- SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL | \
+ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
SDHCI_INT_DATA_END_BIT)
@@ -121,9 +130,17 @@
/* 3E-3F reserved */
#define SDHCI_CAPABILITIES 0x40
-#define SDHCI_CAN_DO_DMA 0x00400000
+#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
+#define SDHCI_TIMEOUT_CLK_SHIFT 0
+#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
#define SDHCI_CLOCK_BASE_MASK 0x00003F00
#define SDHCI_CLOCK_BASE_SHIFT 8
+#define SDHCI_MAX_BLOCK_MASK 0x00030000
+#define SDHCI_MAX_BLOCK_SHIFT 16
+#define SDHCI_CAN_DO_DMA 0x00400000
+#define SDHCI_CAN_VDD_330 0x01000000
+#define SDHCI_CAN_VDD_300 0x02000000
+#define SDHCI_CAN_VDD_180 0x04000000
/* 44-47 reserved for more caps */
@@ -136,6 +153,10 @@
#define SDHCI_SLOT_INT_STATUS 0xFC
#define SDHCI_HOST_VERSION 0xFE
+#define SDHCI_VENDOR_VER_MASK 0xFF00
+#define SDHCI_VENDOR_VER_SHIFT 8
+#define SDHCI_SPEC_VER_MASK 0x00FF
+#define SDHCI_SPEC_VER_SHIFT 0
struct sdhci_chip;
@@ -149,8 +170,11 @@
#define SDHCI_USE_DMA (1<<0)
unsigned int max_clk; /* Max possible freq (MHz) */
+ unsigned int timeout_clk; /* Timeout freq (KHz) */
+ unsigned int max_block; /* Max block size (bytes) */
unsigned int clock; /* Current clock (MHz) */
+ unsigned short power; /* Current voltage */
struct mmc_request *mrq; /* Current request */
struct mmc_command *cmd; /* Current command */
@@ -180,6 +204,8 @@
struct sdhci_chip {
struct pci_dev *pdev;
+ unsigned long quirks;
+
int num_slots; /* Slots on controller */
struct sdhci_host *hosts[0]; /* Pointers to hosts */
};