| /* |
| * Alchemy PCI host mode support. |
| * |
| * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. <source@mvista.com> |
| * |
| * Support for all devices (greater than 16) added by David Gathright. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/platform_device.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/vmalloc.h> |
| |
| #include <asm/mach-au1x00/au1000.h> |
| |
| #ifdef CONFIG_DEBUG_PCI |
| #define DBG(x...) printk(KERN_DEBUG x) |
| #else |
| #define DBG(x...) do {} while (0) |
| #endif |
| |
| #define PCI_ACCESS_READ 0 |
| #define PCI_ACCESS_WRITE 1 |
| |
| struct alchemy_pci_context { |
| struct pci_controller alchemy_pci_ctrl; /* leave as first member! */ |
| void __iomem *regs; /* ctrl base */ |
| /* tools for wired entry for config space access */ |
| unsigned long last_elo0; |
| unsigned long last_elo1; |
| int wired_entry; |
| struct vm_struct *pci_cfg_vm; |
| |
| unsigned long pm[12]; |
| |
| int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin); |
| int (*board_pci_idsel)(unsigned int devsel, int assert); |
| }; |
| |
| /* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr |
| * in arch/mips/alchemy/common/setup.c |
| */ |
| static struct resource alchemy_pci_def_memres = { |
| .start = ALCHEMY_PCI_MEMWIN_START, |
| .end = ALCHEMY_PCI_MEMWIN_END, |
| .name = "PCI memory space", |
| .flags = IORESOURCE_MEM |
| }; |
| |
| static struct resource alchemy_pci_def_iores = { |
| .start = ALCHEMY_PCI_IOWIN_START, |
| .end = ALCHEMY_PCI_IOWIN_END, |
| .name = "PCI IO space", |
| .flags = IORESOURCE_IO |
| }; |
| |
| static void mod_wired_entry(int entry, unsigned long entrylo0, |
| unsigned long entrylo1, unsigned long entryhi, |
| unsigned long pagemask) |
| { |
| unsigned long old_pagemask; |
| unsigned long old_ctx; |
| |
| /* Save old context and create impossible VPN2 value */ |
| old_ctx = read_c0_entryhi() & 0xff; |
| old_pagemask = read_c0_pagemask(); |
| write_c0_index(entry); |
| write_c0_pagemask(pagemask); |
| write_c0_entryhi(entryhi); |
| write_c0_entrylo0(entrylo0); |
| write_c0_entrylo1(entrylo1); |
| tlb_write_indexed(); |
| write_c0_entryhi(old_ctx); |
| write_c0_pagemask(old_pagemask); |
| } |
| |
| static void alchemy_pci_wired_entry(struct alchemy_pci_context *ctx) |
| { |
| ctx->wired_entry = read_c0_wired(); |
| add_wired_entry(0, 0, (unsigned long)ctx->pci_cfg_vm->addr, PM_4K); |
| ctx->last_elo0 = ctx->last_elo1 = ~0; |
| } |
| |
| static int config_access(unsigned char access_type, struct pci_bus *bus, |
| unsigned int dev_fn, unsigned char where, u32 *data) |
| { |
| struct alchemy_pci_context *ctx = bus->sysdata; |
| unsigned int device = PCI_SLOT(dev_fn); |
| unsigned int function = PCI_FUNC(dev_fn); |
| unsigned long offset, status, cfg_base, flags, entryLo0, entryLo1, r; |
| int error = PCIBIOS_SUCCESSFUL; |
| |
| if (device > 19) { |
| *data = 0xffffffff; |
| return -1; |
| } |
| |
| /* YAMON on all db1xxx boards wipes the TLB and writes zero to C0_wired |
| * on resume, clearing our wired entry. Unfortunately the ->resume() |
| * callback is called way way way too late (and ->suspend() too early) |
| * to have them destroy and recreate it. Instead just test if c0_wired |
| * is now lower than the index we retrieved before suspending and then |
| * recreate the entry if necessary. Of course this is totally bonkers |
| * and breaks as soon as someone else adds another wired entry somewhere |
| * else. Anyone have any ideas how to handle this better? |
| */ |
| if (unlikely(read_c0_wired() < ctx->wired_entry)) |
| alchemy_pci_wired_entry(ctx); |
| |
| local_irq_save(flags); |
| r = __raw_readl(ctx->regs + PCI_REG_STATCMD) & 0x0000ffff; |
| r |= PCI_STATCMD_STATUS(0x2000); |
| __raw_writel(r, ctx->regs + PCI_REG_STATCMD); |
| wmb(); |
| |
| /* Allow board vendors to implement their own off-chip IDSEL. |
| * If it doesn't succeed, may as well bail out at this point. |
| */ |
| if (ctx->board_pci_idsel(device, 1) == 0) { |
| *data = 0xffffffff; |
| local_irq_restore(flags); |
| return -1; |
| } |
| |
| /* Setup the config window */ |
| if (bus->number == 0) |
| cfg_base = (1 << device) << 11; |
| else |
| cfg_base = 0x80000000 | (bus->number << 16) | (device << 11); |
| |
| /* Setup the lower bits of the 36-bit address */ |
| offset = (function << 8) | (where & ~0x3); |
| /* Pick up any address that falls below the page mask */ |
| offset |= cfg_base & ~PAGE_MASK; |
| |
| /* Page boundary */ |
| cfg_base = cfg_base & PAGE_MASK; |
| |
| /* To improve performance, if the current device is the same as |
| * the last device accessed, we don't touch the TLB. |
| */ |
| entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7; |
| entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7; |
| if ((entryLo0 != ctx->last_elo0) || (entryLo1 != ctx->last_elo1)) { |
| mod_wired_entry(ctx->wired_entry, entryLo0, entryLo1, |
| (unsigned long)ctx->pci_cfg_vm->addr, PM_4K); |
| ctx->last_elo0 = entryLo0; |
| ctx->last_elo1 = entryLo1; |
| } |
| |
| if (access_type == PCI_ACCESS_WRITE) |
| __raw_writel(*data, ctx->pci_cfg_vm->addr + offset); |
| else |
| *data = __raw_readl(ctx->pci_cfg_vm->addr + offset); |
| wmb(); |
| |
| DBG("alchemy-pci: cfg access %d bus %u dev %u at %x dat %x conf %lx\n", |
| access_type, bus->number, device, where, *data, offset); |
| |
| /* check for errors, master abort */ |
| status = __raw_readl(ctx->regs + PCI_REG_STATCMD); |
| if (status & (1 << 29)) { |
| *data = 0xffffffff; |
| error = -1; |
| DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d", |
| access_type, bus->number, device); |
| } else if ((status >> 28) & 0xf) { |
| DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n", |
| device, (status >> 28) & 0xf); |
| |
| /* clear errors */ |
| __raw_writel(status & 0xf000ffff, ctx->regs + PCI_REG_STATCMD); |
| |
| *data = 0xffffffff; |
| error = -1; |
| } |
| |
| /* Take away the IDSEL. */ |
| (void)ctx->board_pci_idsel(device, 0); |
| |
| local_irq_restore(flags); |
| return error; |
| } |
| |
| static int read_config_byte(struct pci_bus *bus, unsigned int devfn, |
| int where, u8 *val) |
| { |
| u32 data; |
| int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); |
| |
| if (where & 1) |
| data >>= 8; |
| if (where & 2) |
| data >>= 16; |
| *val = data & 0xff; |
| return ret; |
| } |
| |
| static int read_config_word(struct pci_bus *bus, unsigned int devfn, |
| int where, u16 *val) |
| { |
| u32 data; |
| int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); |
| |
| if (where & 2) |
| data >>= 16; |
| *val = data & 0xffff; |
| return ret; |
| } |
| |
| static int read_config_dword(struct pci_bus *bus, unsigned int devfn, |
| int where, u32 *val) |
| { |
| return config_access(PCI_ACCESS_READ, bus, devfn, where, val); |
| } |
| |
| static int write_config_byte(struct pci_bus *bus, unsigned int devfn, |
| int where, u8 val) |
| { |
| u32 data = 0; |
| |
| if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) |
| return -1; |
| |
| data = (data & ~(0xff << ((where & 3) << 3))) | |
| (val << ((where & 3) << 3)); |
| |
| if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) |
| return -1; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int write_config_word(struct pci_bus *bus, unsigned int devfn, |
| int where, u16 val) |
| { |
| u32 data = 0; |
| |
| if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) |
| return -1; |
| |
| data = (data & ~(0xffff << ((where & 3) << 3))) | |
| (val << ((where & 3) << 3)); |
| |
| if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) |
| return -1; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int write_config_dword(struct pci_bus *bus, unsigned int devfn, |
| int where, u32 val) |
| { |
| return config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val); |
| } |
| |
| static int alchemy_pci_read(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 *val) |
| { |
| switch (size) { |
| case 1: { |
| u8 _val; |
| int rc = read_config_byte(bus, devfn, where, &_val); |
| |
| *val = _val; |
| return rc; |
| } |
| case 2: { |
| u16 _val; |
| int rc = read_config_word(bus, devfn, where, &_val); |
| |
| *val = _val; |
| return rc; |
| } |
| default: |
| return read_config_dword(bus, devfn, where, val); |
| } |
| } |
| |
| static int alchemy_pci_write(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 val) |
| { |
| switch (size) { |
| case 1: |
| return write_config_byte(bus, devfn, where, (u8) val); |
| case 2: |
| return write_config_word(bus, devfn, where, (u16) val); |
| default: |
| return write_config_dword(bus, devfn, where, val); |
| } |
| } |
| |
| static struct pci_ops alchemy_pci_ops = { |
| .read = alchemy_pci_read, |
| .write = alchemy_pci_write, |
| }; |
| |
| static int alchemy_pci_def_idsel(unsigned int devsel, int assert) |
| { |
| return 1; /* success */ |
| } |
| |
| static int __devinit alchemy_pci_probe(struct platform_device *pdev) |
| { |
| struct alchemy_pci_platdata *pd = pdev->dev.platform_data; |
| struct alchemy_pci_context *ctx; |
| void __iomem *virt_io; |
| unsigned long val; |
| struct resource *r; |
| int ret; |
| |
| /* need at least PCI IRQ mapping table */ |
| if (!pd) { |
| dev_err(&pdev->dev, "need platform data for PCI setup\n"); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) { |
| dev_err(&pdev->dev, "no memory for pcictl context\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!r) { |
| dev_err(&pdev->dev, "no pcictl ctrl regs resource\n"); |
| ret = -ENODEV; |
| goto out1; |
| } |
| |
| if (!request_mem_region(r->start, resource_size(r), pdev->name)) { |
| dev_err(&pdev->dev, "cannot claim pci regs\n"); |
| ret = -ENODEV; |
| goto out1; |
| } |
| |
| ctx->regs = ioremap_nocache(r->start, resource_size(r)); |
| if (!ctx->regs) { |
| dev_err(&pdev->dev, "cannot map pci regs\n"); |
| ret = -ENODEV; |
| goto out2; |
| } |
| |
| /* map parts of the PCI IO area */ |
| /* REVISIT: if this changes with a newer variant (doubt it) make this |
| * a platform resource. |
| */ |
| virt_io = ioremap(AU1500_PCI_IO_PHYS_ADDR, 0x00100000); |
| if (!virt_io) { |
| dev_err(&pdev->dev, "cannot remap pci io space\n"); |
| ret = -ENODEV; |
| goto out3; |
| } |
| ctx->alchemy_pci_ctrl.io_map_base = (unsigned long)virt_io; |
| |
| #ifdef CONFIG_DMA_NONCOHERENT |
| /* Au1500 revisions older than AD have borked coherent PCI */ |
| if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) && |
| (read_c0_prid() < 0x01030202)) { |
| val = __raw_readl(ctx->regs + PCI_REG_CONFIG); |
| val |= PCI_CONFIG_NC; |
| __raw_writel(val, ctx->regs + PCI_REG_CONFIG); |
| wmb(); |
| dev_info(&pdev->dev, "non-coherent PCI on Au1500 AA/AB/AC\n"); |
| } |
| #endif |
| |
| if (pd->board_map_irq) |
| ctx->board_map_irq = pd->board_map_irq; |
| |
| if (pd->board_pci_idsel) |
| ctx->board_pci_idsel = pd->board_pci_idsel; |
| else |
| ctx->board_pci_idsel = alchemy_pci_def_idsel; |
| |
| /* fill in relevant pci_controller members */ |
| ctx->alchemy_pci_ctrl.pci_ops = &alchemy_pci_ops; |
| ctx->alchemy_pci_ctrl.mem_resource = &alchemy_pci_def_memres; |
| ctx->alchemy_pci_ctrl.io_resource = &alchemy_pci_def_iores; |
| |
| /* we can't ioremap the entire pci config space because it's too large, |
| * nor can we dynamically ioremap it because some drivers use the |
| * PCI config routines from within atomic contex and that becomes a |
| * problem in get_vm_area(). Instead we use one wired TLB entry to |
| * handle all config accesses for all busses. |
| */ |
| ctx->pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP); |
| if (!ctx->pci_cfg_vm) { |
| dev_err(&pdev->dev, "unable to get vm area\n"); |
| ret = -ENOMEM; |
| goto out4; |
| } |
| ctx->wired_entry = 8192; /* impossibly high value */ |
| |
| set_io_port_base((unsigned long)ctx->alchemy_pci_ctrl.io_map_base); |
| |
| /* board may want to modify bits in the config register, do it now */ |
| val = __raw_readl(ctx->regs + PCI_REG_CONFIG); |
| val &= ~pd->pci_cfg_clr; |
| val |= pd->pci_cfg_set; |
| val &= ~PCI_CONFIG_PD; /* clear disable bit */ |
| __raw_writel(val, ctx->regs + PCI_REG_CONFIG); |
| wmb(); |
| |
| platform_set_drvdata(pdev, ctx); |
| register_pci_controller(&ctx->alchemy_pci_ctrl); |
| |
| return 0; |
| |
| out4: |
| iounmap(virt_io); |
| out3: |
| iounmap(ctx->regs); |
| out2: |
| release_mem_region(r->start, resource_size(r)); |
| out1: |
| kfree(ctx); |
| out: |
| return ret; |
| } |
| |
| |
| #ifdef CONFIG_PM |
| /* save PCI controller register contents. */ |
| static int alchemy_pci_suspend(struct device *dev) |
| { |
| struct alchemy_pci_context *ctx = dev_get_drvdata(dev); |
| |
| ctx->pm[0] = __raw_readl(ctx->regs + PCI_REG_CMEM); |
| ctx->pm[1] = __raw_readl(ctx->regs + PCI_REG_CONFIG) & 0x0009ffff; |
| ctx->pm[2] = __raw_readl(ctx->regs + PCI_REG_B2BMASK_CCH); |
| ctx->pm[3] = __raw_readl(ctx->regs + PCI_REG_B2BBASE0_VID); |
| ctx->pm[4] = __raw_readl(ctx->regs + PCI_REG_B2BBASE1_SID); |
| ctx->pm[5] = __raw_readl(ctx->regs + PCI_REG_MWMASK_DEV); |
| ctx->pm[6] = __raw_readl(ctx->regs + PCI_REG_MWBASE_REV_CCL); |
| ctx->pm[7] = __raw_readl(ctx->regs + PCI_REG_ID); |
| ctx->pm[8] = __raw_readl(ctx->regs + PCI_REG_CLASSREV); |
| ctx->pm[9] = __raw_readl(ctx->regs + PCI_REG_PARAM); |
| ctx->pm[10] = __raw_readl(ctx->regs + PCI_REG_MBAR); |
| ctx->pm[11] = __raw_readl(ctx->regs + PCI_REG_TIMEOUT); |
| |
| return 0; |
| } |
| |
| static int alchemy_pci_resume(struct device *dev) |
| { |
| struct alchemy_pci_context *ctx = dev_get_drvdata(dev); |
| |
| __raw_writel(ctx->pm[0], ctx->regs + PCI_REG_CMEM); |
| __raw_writel(ctx->pm[2], ctx->regs + PCI_REG_B2BMASK_CCH); |
| __raw_writel(ctx->pm[3], ctx->regs + PCI_REG_B2BBASE0_VID); |
| __raw_writel(ctx->pm[4], ctx->regs + PCI_REG_B2BBASE1_SID); |
| __raw_writel(ctx->pm[5], ctx->regs + PCI_REG_MWMASK_DEV); |
| __raw_writel(ctx->pm[6], ctx->regs + PCI_REG_MWBASE_REV_CCL); |
| __raw_writel(ctx->pm[7], ctx->regs + PCI_REG_ID); |
| __raw_writel(ctx->pm[8], ctx->regs + PCI_REG_CLASSREV); |
| __raw_writel(ctx->pm[9], ctx->regs + PCI_REG_PARAM); |
| __raw_writel(ctx->pm[10], ctx->regs + PCI_REG_MBAR); |
| __raw_writel(ctx->pm[11], ctx->regs + PCI_REG_TIMEOUT); |
| wmb(); |
| __raw_writel(ctx->pm[1], ctx->regs + PCI_REG_CONFIG); |
| wmb(); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops alchemy_pci_pmops = { |
| .suspend = alchemy_pci_suspend, |
| .resume = alchemy_pci_resume, |
| }; |
| |
| #define ALCHEMY_PCICTL_PM (&alchemy_pci_pmops) |
| |
| #else |
| #define ALCHEMY_PCICTL_PM NULL |
| #endif |
| |
| static struct platform_driver alchemy_pcictl_driver = { |
| .probe = alchemy_pci_probe, |
| .driver = { |
| .name = "alchemy-pci", |
| .owner = THIS_MODULE, |
| .pm = ALCHEMY_PCICTL_PM, |
| }, |
| }; |
| |
| static int __init alchemy_pci_init(void) |
| { |
| /* Au1500/Au1550 have PCI */ |
| switch (alchemy_get_cputype()) { |
| case ALCHEMY_CPU_AU1500: |
| case ALCHEMY_CPU_AU1550: |
| return platform_driver_register(&alchemy_pcictl_driver); |
| } |
| return 0; |
| } |
| arch_initcall(alchemy_pci_init); |
| |
| |
| int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| struct alchemy_pci_context *ctx = dev->sysdata; |
| if (ctx && ctx->board_map_irq) |
| return ctx->board_map_irq(dev, slot, pin); |
| return -1; |
| } |
| |
| int pcibios_plat_dev_init(struct pci_dev *dev) |
| { |
| return 0; |
| } |