| /* |
| * CAN bus driver for the alone generic (as possible as) MSCAN controller. |
| * |
| * Copyright (C) 2005-2006 Andrey Volkov <avolkov@varma-el.com>, |
| * Varma Electronics Oy |
| * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com> |
| * Copytight (C) 2008-2009 Pengutronix <kernel@pengutronix.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the version 2 of the GNU General Public License |
| * as published by the Free Software Foundation |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/if_arp.h> |
| #include <linux/if_ether.h> |
| #include <linux/list.h> |
| #include <linux/can.h> |
| #include <linux/can/dev.h> |
| #include <linux/can/error.h> |
| #include <linux/io.h> |
| |
| #include "mscan.h" |
| |
| static struct can_bittiming_const mscan_bittiming_const = { |
| .name = "mscan", |
| .tseg1_min = 4, |
| .tseg1_max = 16, |
| .tseg2_min = 2, |
| .tseg2_max = 8, |
| .sjw_max = 4, |
| .brp_min = 1, |
| .brp_max = 64, |
| .brp_inc = 1, |
| }; |
| |
| struct mscan_state { |
| u8 mode; |
| u8 canrier; |
| u8 cantier; |
| }; |
| |
| static enum can_state state_map[] = { |
| CAN_STATE_ERROR_ACTIVE, |
| CAN_STATE_ERROR_WARNING, |
| CAN_STATE_ERROR_PASSIVE, |
| CAN_STATE_BUS_OFF |
| }; |
| |
| static int mscan_set_mode(struct net_device *dev, u8 mode) |
| { |
| struct mscan_priv *priv = netdev_priv(dev); |
| struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; |
| int ret = 0; |
| int i; |
| u8 canctl1; |
| |
| if (mode != MSCAN_NORMAL_MODE) { |
| if (priv->tx_active) { |
| /* Abort transfers before going to sleep */# |
| out_8(®s->cantarq, priv->tx_active); |
| /* Suppress TX done interrupts */ |
| out_8(®s->cantier, 0); |
| } |
| |
| canctl1 = in_8(®s->canctl1); |
| if ((mode & MSCAN_SLPRQ) && !(canctl1 & MSCAN_SLPAK)) { |
| setbits8(®s->canctl0, MSCAN_SLPRQ); |
| for (i = 0; i < MSCAN_SET_MODE_RETRIES; i++) { |
| if (in_8(®s->canctl1) & MSCAN_SLPAK) |
| break; |
| udelay(100); |
| } |
| /* |
| * The mscan controller will fail to enter sleep mode, |
| * while there are irregular activities on bus, like |
| * somebody keeps retransmitting. This behavior is |
| * undocumented and seems to differ between mscan built |
| * in mpc5200b and mpc5200. We proceed in that case, |
| * since otherwise the slprq will be kept set and the |
| * controller will get stuck. NOTE: INITRQ or CSWAI |
| * will abort all active transmit actions, if still |
| * any, at once. |
| */ |
| if (i >= MSCAN_SET_MODE_RETRIES) |
| dev_dbg(dev->dev.parent, |
| "device failed to enter sleep mode. " |
| "We proceed anyhow.\n"); |
| else |
| priv->can.state = CAN_STATE_SLEEPING; |
| } |
| |
| if ((mode & MSCAN_INITRQ) && !(canctl1 & MSCAN_INITAK)) { |
| setbits8(®s->canctl0, MSCAN_INITRQ); |
| for (i = 0; i < MSCAN_SET_MODE_RETRIES; i++) { |
| if (in_8(®s->canctl1) & MSCAN_INITAK) |
| break; |
| } |
| if (i >= MSCAN_SET_MODE_RETRIES) |
| ret = -ENODEV; |
| } |
| if (!ret) |
| priv->can.state = CAN_STATE_STOPPED; |
| |
| if (mode & MSCAN_CSWAI) |
| setbits8(®s->canctl0, MSCAN_CSWAI); |
| |
| } else { |
| canctl1 = in_8(®s->canctl1); |
| if (canctl1 & (MSCAN_SLPAK | MSCAN_INITAK)) { |
| clrbits8(®s->canctl0, MSCAN_SLPRQ | MSCAN_INITRQ); |
| for (i = 0; i < MSCAN_SET_MODE_RETRIES; i++) { |
| canctl1 = in_8(®s->canctl1); |
| if (!(canctl1 & (MSCAN_INITAK | MSCAN_SLPAK))) |
| break; |
| } |
| if (i >= MSCAN_SET_MODE_RETRIES) |
| ret = -ENODEV; |
| else |
| priv->can.state = CAN_STATE_ERROR_ACTIVE; |
| } |
| } |
| return ret; |
| } |
| |
| static int mscan_start(struct net_device *dev) |
| { |
| struct mscan_priv *priv = netdev_priv(dev); |
| struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; |
| u8 canrflg; |
| int err; |
| |
| out_8(®s->canrier, 0); |
| |
| INIT_LIST_HEAD(&priv->tx_head); |
| priv->prev_buf_id = 0; |
| priv->cur_pri = 0; |
| priv->tx_active = 0; |
| priv->shadow_canrier = 0; |
| priv->flags = 0; |
| |
| err = mscan_set_mode(dev, MSCAN_NORMAL_MODE); |
| if (err) |
| return err; |
| |
| canrflg = in_8(®s->canrflg); |
| priv->shadow_statflg = canrflg & MSCAN_STAT_MSK; |
| priv->can.state = state_map[max(MSCAN_STATE_RX(canrflg), |
| MSCAN_STATE_TX(canrflg))]; |
| out_8(®s->cantier, 0); |
| |
| /* Enable receive interrupts. */ |
| out_8(®s->canrier, MSCAN_OVRIE | MSCAN_RXFIE | MSCAN_CSCIE | |
| MSCAN_RSTATE1 | MSCAN_RSTATE0 | MSCAN_TSTATE1 | MSCAN_TSTATE0); |
| |
| return 0; |
| } |
| |
| static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct can_frame *frame = (struct can_frame *)skb->data; |
| struct mscan_priv *priv = netdev_priv(dev); |
| struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; |
| int i, rtr, buf_id; |
| u32 can_id; |
| |
| if (frame->can_dlc > 8) |
| return -EINVAL; |
| |
| out_8(®s->cantier, 0); |
| |
| i = ~priv->tx_active & MSCAN_TXE; |
| buf_id = ffs(i) - 1; |
| switch (hweight8(i)) { |
| case 0: |
| netif_stop_queue(dev); |
| dev_err(dev->dev.parent, "Tx Ring full when queue awake!\n"); |
| return NETDEV_TX_BUSY; |
| case 1: |
| /* |
| * if buf_id < 3, then current frame will be send out of order, |
| * since buffer with lower id have higher priority (hell..) |
| */ |
| netif_stop_queue(dev); |
| case 2: |
| if (buf_id < priv->prev_buf_id) { |
| priv->cur_pri++; |
| if (priv->cur_pri == 0xff) { |
| set_bit(F_TX_WAIT_ALL, &priv->flags); |
| netif_stop_queue(dev); |
| } |
| } |
| set_bit(F_TX_PROGRESS, &priv->flags); |
| break; |
| } |
| priv->prev_buf_id = buf_id; |
| out_8(®s->cantbsel, i); |
| |
| rtr = frame->can_id & CAN_RTR_FLAG; |
| |
| if (frame->can_id & CAN_EFF_FLAG) { |
| can_id = (frame->can_id & CAN_EFF_MASK) << 1; |
| if (rtr) |
| can_id |= 1; |
| out_be16(®s->tx.idr3_2, can_id); |
| |
| can_id >>= 16; |
| can_id = (can_id & 0x7) | ((can_id << 2) & 0xffe0) | (3 << 3); |
| } else { |
| can_id = (frame->can_id & CAN_SFF_MASK) << 5; |
| if (rtr) |
| can_id |= 1 << 4; |
| } |
| out_be16(®s->tx.idr1_0, can_id); |
| |
| if (!rtr) { |
| void __iomem *data = ®s->tx.dsr1_0; |
| u16 *payload = (u16 *)frame->data; |
| |
| /* It is safe to write into dsr[dlc+1] */ |
| for (i = 0; i < (frame->can_dlc + 1) / 2; i++) { |
| out_be16(data, *payload++); |
| data += 2 + _MSCAN_RESERVED_DSR_SIZE; |
| } |
| } |
| |
| out_8(®s->tx.dlr, frame->can_dlc); |
| out_8(®s->tx.tbpr, priv->cur_pri); |
| |
| /* Start transmission. */ |
| out_8(®s->cantflg, 1 << buf_id); |
| |
| if (!test_bit(F_TX_PROGRESS, &priv->flags)) |
| dev->trans_start = jiffies; |
| |
| list_add_tail(&priv->tx_queue[buf_id].list, &priv->tx_head); |
| |
| can_put_echo_skb(skb, dev, buf_id); |
| |
| /* Enable interrupt. */ |
| priv->tx_active |= 1 << buf_id; |
| out_8(®s->cantier, priv->tx_active); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| /* This function returns the old state to see where we came from */ |
| static enum can_state check_set_state(struct net_device *dev, u8 canrflg) |
| { |
| struct mscan_priv *priv = netdev_priv(dev); |
| enum can_state state, old_state = priv->can.state; |
| |
| if (canrflg & MSCAN_CSCIF && old_state <= CAN_STATE_BUS_OFF) { |
| state = state_map[max(MSCAN_STATE_RX(canrflg), |
| MSCAN_STATE_TX(canrflg))]; |
| priv->can.state = state; |
| } |
| return old_state; |
| } |
| |
| static void mscan_get_rx_frame(struct net_device *dev, struct can_frame *frame) |
| { |
| struct mscan_priv *priv = netdev_priv(dev); |
| struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; |
| u32 can_id; |
| int i; |
| |
| can_id = in_be16(®s->rx.idr1_0); |
| if (can_id & (1 << 3)) { |
| frame->can_id = CAN_EFF_FLAG; |
| can_id = ((can_id << 16) | in_be16(®s->rx.idr3_2)); |
| can_id = ((can_id & 0xffe00000) | |
| ((can_id & 0x7ffff) << 2)) >> 2; |
| } else { |
| can_id >>= 4; |
| frame->can_id = 0; |
| } |
| |
| frame->can_id |= can_id >> 1; |
| if (can_id & 1) |
| frame->can_id |= CAN_RTR_FLAG; |
| frame->can_dlc = in_8(®s->rx.dlr) & 0xf; |
| |
| if (!(frame->can_id & CAN_RTR_FLAG)) { |
| void __iomem *data = ®s->rx.dsr1_0; |
| u16 *payload = (u16 *)frame->data; |
| |
| for (i = 0; i < (frame->can_dlc + 1) / 2; i++) { |
| *payload++ = in_be16(data); |
| data += 2 + _MSCAN_RESERVED_DSR_SIZE; |
| } |
| } |
| |
| out_8(®s->canrflg, MSCAN_RXF); |
| } |
| |
| static void mscan_get_err_frame(struct net_device *dev, struct can_frame *frame, |
| u8 canrflg) |
| { |
| struct mscan_priv *priv = netdev_priv(dev); |
| struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; |
| struct net_device_stats *stats = &dev->stats; |
| enum can_state old_state; |
| |
| dev_dbg(dev->dev.parent, "error interrupt (canrflg=%#x)\n", canrflg); |
| frame->can_id = CAN_ERR_FLAG; |
| |
| if (canrflg & MSCAN_OVRIF) { |
| frame->can_id |= CAN_ERR_CRTL; |
| frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; |
| stats->rx_over_errors++; |
| stats->rx_errors++; |
| } else { |
| frame->data[1] = 0; |
| } |
| |
| old_state = check_set_state(dev, canrflg); |
| /* State changed */ |
| if (old_state != priv->can.state) { |
| switch (priv->can.state) { |
| case CAN_STATE_ERROR_WARNING: |
| frame->can_id |= CAN_ERR_CRTL; |
| priv->can.can_stats.error_warning++; |
| if ((priv->shadow_statflg & MSCAN_RSTAT_MSK) < |
| (canrflg & MSCAN_RSTAT_MSK)) |
| frame->data[1] |= CAN_ERR_CRTL_RX_WARNING; |
| if ((priv->shadow_statflg & MSCAN_TSTAT_MSK) < |
| (canrflg & MSCAN_TSTAT_MSK)) |
| frame->data[1] |= CAN_ERR_CRTL_TX_WARNING; |
| break; |
| case CAN_STATE_ERROR_PASSIVE: |
| frame->can_id |= CAN_ERR_CRTL; |
| priv->can.can_stats.error_passive++; |
| frame->data[1] |= CAN_ERR_CRTL_RX_PASSIVE; |
| break; |
| case CAN_STATE_BUS_OFF: |
| frame->can_id |= CAN_ERR_BUSOFF; |
| /* |
| * The MSCAN on the MPC5200 does recover from bus-off |
| * automatically. To avoid that we stop the chip doing |
| * a light-weight stop (we are in irq-context). |
| */ |
| out_8(®s->cantier, 0); |
| out_8(®s->canrier, 0); |
| setbits8(®s->canctl0, MSCAN_SLPRQ | MSCAN_INITRQ); |
| can_bus_off(dev); |
| break; |
| default: |
| break; |
| } |
| } |
| priv->shadow_statflg = canrflg & MSCAN_STAT_MSK; |
| frame->can_dlc = CAN_ERR_DLC; |
| out_8(®s->canrflg, MSCAN_ERR_IF); |
| } |
| |
| static int mscan_rx_poll(struct napi_struct *napi, int quota) |
| { |
| struct mscan_priv *priv = container_of(napi, struct mscan_priv, napi); |
| struct net_device *dev = napi->dev; |
| struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; |
| struct net_device_stats *stats = &dev->stats; |
| int npackets = 0; |
| int ret = 1; |
| struct sk_buff *skb; |
| struct can_frame *frame; |
| u8 canrflg; |
| |
| while (npackets < quota && ((canrflg = in_8(®s->canrflg)) & |
| (MSCAN_RXF | MSCAN_ERR_IF))) { |
| |
| skb = alloc_can_skb(dev, &frame); |
| if (!skb) { |
| if (printk_ratelimit()) |
| dev_notice(dev->dev.parent, "packet dropped\n"); |
| stats->rx_dropped++; |
| out_8(®s->canrflg, canrflg); |
| continue; |
| } |
| |
| if (canrflg & MSCAN_RXF) |
| mscan_get_rx_frame(dev, frame); |
| else if (canrflg & MSCAN_ERR_IF) |
| mscan_get_err_frame(dev, frame, canrflg); |
| |
| stats->rx_packets++; |
| stats->rx_bytes += frame->can_dlc; |
| npackets++; |
| netif_receive_skb(skb); |
| } |
| |
| if (!(in_8(®s->canrflg) & (MSCAN_RXF | MSCAN_ERR_IF))) { |
| napi_complete(&priv->napi); |
| clear_bit(F_RX_PROGRESS, &priv->flags); |
| if (priv->can.state < CAN_STATE_BUS_OFF) |
| out_8(®s->canrier, priv->shadow_canrier); |
| ret = 0; |
| } |
| return ret; |
| } |
| |
| static irqreturn_t mscan_isr(int irq, void *dev_id) |
| { |
| struct net_device *dev = (struct net_device *)dev_id; |
| struct mscan_priv *priv = netdev_priv(dev); |
| struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; |
| struct net_device_stats *stats = &dev->stats; |
| u8 cantier, cantflg, canrflg; |
| irqreturn_t ret = IRQ_NONE; |
| |
| cantier = in_8(®s->cantier) & MSCAN_TXE; |
| cantflg = in_8(®s->cantflg) & cantier; |
| |
| if (cantier && cantflg) { |
| struct list_head *tmp, *pos; |
| |
| list_for_each_safe(pos, tmp, &priv->tx_head) { |
| struct tx_queue_entry *entry = |
| list_entry(pos, struct tx_queue_entry, list); |
| u8 mask = entry->mask; |
| |
| if (!(cantflg & mask)) |
| continue; |
| |
| out_8(®s->cantbsel, mask); |
| stats->tx_bytes += in_8(®s->tx.dlr); |
| stats->tx_packets++; |
| can_get_echo_skb(dev, entry->id); |
| priv->tx_active &= ~mask; |
| list_del(pos); |
| } |
| |
| if (list_empty(&priv->tx_head)) { |
| clear_bit(F_TX_WAIT_ALL, &priv->flags); |
| clear_bit(F_TX_PROGRESS, &priv->flags); |
| priv->cur_pri = 0; |
| } else { |
| dev->trans_start = jiffies; |
| } |
| |
| if (!test_bit(F_TX_WAIT_ALL, &priv->flags)) |
| netif_wake_queue(dev); |
| |
| out_8(®s->cantier, priv->tx_active); |
| ret = IRQ_HANDLED; |
| } |
| |
| canrflg = in_8(®s->canrflg); |
| if ((canrflg & ~MSCAN_STAT_MSK) && |
| !test_and_set_bit(F_RX_PROGRESS, &priv->flags)) { |
| if (canrflg & ~MSCAN_STAT_MSK) { |
| priv->shadow_canrier = in_8(®s->canrier); |
| out_8(®s->canrier, 0); |
| napi_schedule(&priv->napi); |
| ret = IRQ_HANDLED; |
| } else { |
| clear_bit(F_RX_PROGRESS, &priv->flags); |
| } |
| } |
| return ret; |
| } |
| |
| static int mscan_do_set_mode(struct net_device *dev, enum can_mode mode) |
| { |
| struct mscan_priv *priv = netdev_priv(dev); |
| int ret = 0; |
| |
| if (!priv->open_time) |
| return -EINVAL; |
| |
| switch (mode) { |
| case CAN_MODE_START: |
| if (priv->can.state <= CAN_STATE_BUS_OFF) |
| mscan_set_mode(dev, MSCAN_INIT_MODE); |
| ret = mscan_start(dev); |
| if (ret) |
| break; |
| if (netif_queue_stopped(dev)) |
| netif_wake_queue(dev); |
| break; |
| |
| default: |
| ret = -EOPNOTSUPP; |
| break; |
| } |
| return ret; |
| } |
| |
| static int mscan_do_set_bittiming(struct net_device *dev) |
| { |
| struct mscan_priv *priv = netdev_priv(dev); |
| struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; |
| struct can_bittiming *bt = &priv->can.bittiming; |
| u8 btr0, btr1; |
| |
| btr0 = BTR0_SET_BRP(bt->brp) | BTR0_SET_SJW(bt->sjw); |
| btr1 = (BTR1_SET_TSEG1(bt->prop_seg + bt->phase_seg1) | |
| BTR1_SET_TSEG2(bt->phase_seg2) | |
| BTR1_SET_SAM(priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)); |
| |
| dev_info(dev->dev.parent, "setting BTR0=0x%02x BTR1=0x%02x\n", |
| btr0, btr1); |
| |
| out_8(®s->canbtr0, btr0); |
| out_8(®s->canbtr1, btr1); |
| |
| return 0; |
| } |
| |
| static int mscan_open(struct net_device *dev) |
| { |
| int ret; |
| struct mscan_priv *priv = netdev_priv(dev); |
| struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; |
| |
| /* common open */ |
| ret = open_candev(dev); |
| if (ret) |
| return ret; |
| |
| napi_enable(&priv->napi); |
| |
| ret = request_irq(dev->irq, mscan_isr, 0, dev->name, dev); |
| if (ret < 0) { |
| napi_disable(&priv->napi); |
| printk(KERN_ERR "%s - failed to attach interrupt\n", |
| dev->name); |
| return ret; |
| } |
| |
| priv->open_time = jiffies; |
| |
| clrbits8(®s->canctl1, MSCAN_LISTEN); |
| |
| ret = mscan_start(dev); |
| if (ret) |
| return ret; |
| |
| netif_start_queue(dev); |
| |
| return 0; |
| } |
| |
| static int mscan_close(struct net_device *dev) |
| { |
| struct mscan_priv *priv = netdev_priv(dev); |
| struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; |
| |
| netif_stop_queue(dev); |
| napi_disable(&priv->napi); |
| |
| out_8(®s->cantier, 0); |
| out_8(®s->canrier, 0); |
| mscan_set_mode(dev, MSCAN_INIT_MODE); |
| close_candev(dev); |
| free_irq(dev->irq, dev); |
| priv->open_time = 0; |
| |
| return 0; |
| } |
| |
| static const struct net_device_ops mscan_netdev_ops = { |
| .ndo_open = mscan_open, |
| .ndo_stop = mscan_close, |
| .ndo_start_xmit = mscan_start_xmit, |
| }; |
| |
| int register_mscandev(struct net_device *dev, int clock_src) |
| { |
| struct mscan_priv *priv = netdev_priv(dev); |
| struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; |
| u8 ctl1; |
| |
| ctl1 = in_8(®s->canctl1); |
| if (clock_src) |
| ctl1 |= MSCAN_CLKSRC; |
| else |
| ctl1 &= ~MSCAN_CLKSRC; |
| |
| ctl1 |= MSCAN_CANE; |
| out_8(®s->canctl1, ctl1); |
| udelay(100); |
| |
| /* acceptance mask/acceptance code (accept everything) */ |
| out_be16(®s->canidar1_0, 0); |
| out_be16(®s->canidar3_2, 0); |
| out_be16(®s->canidar5_4, 0); |
| out_be16(®s->canidar7_6, 0); |
| |
| out_be16(®s->canidmr1_0, 0xffff); |
| out_be16(®s->canidmr3_2, 0xffff); |
| out_be16(®s->canidmr5_4, 0xffff); |
| out_be16(®s->canidmr7_6, 0xffff); |
| /* Two 32 bit Acceptance Filters */ |
| out_8(®s->canidac, MSCAN_AF_32BIT); |
| |
| mscan_set_mode(dev, MSCAN_INIT_MODE); |
| |
| return register_candev(dev); |
| } |
| |
| void unregister_mscandev(struct net_device *dev) |
| { |
| struct mscan_priv *priv = netdev_priv(dev); |
| struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; |
| mscan_set_mode(dev, MSCAN_INIT_MODE); |
| clrbits8(®s->canctl1, MSCAN_CANE); |
| unregister_candev(dev); |
| } |
| |
| struct net_device *alloc_mscandev(void) |
| { |
| struct net_device *dev; |
| struct mscan_priv *priv; |
| int i; |
| |
| dev = alloc_candev(sizeof(struct mscan_priv), MSCAN_ECHO_SKB_MAX); |
| if (!dev) |
| return NULL; |
| priv = netdev_priv(dev); |
| |
| dev->netdev_ops = &mscan_netdev_ops; |
| |
| dev->flags |= IFF_ECHO; /* we support local echo */ |
| |
| netif_napi_add(dev, &priv->napi, mscan_rx_poll, 8); |
| |
| priv->can.bittiming_const = &mscan_bittiming_const; |
| priv->can.do_set_bittiming = mscan_do_set_bittiming; |
| priv->can.do_set_mode = mscan_do_set_mode; |
| |
| for (i = 0; i < TX_QUEUE_SIZE; i++) { |
| priv->tx_queue[i].id = i; |
| priv->tx_queue[i].mask = 1 << i; |
| } |
| |
| return dev; |
| } |
| |
| MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("CAN port driver for a MSCAN based chips"); |