blob: 28b6b46c106aebf3245640a8f04de5421416bcbe [file] [log] [blame]
/*
* Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
/*
* This file contains support for diagnostic functions. It is accessed by
* opening the ipath_diag device, normally minor number 129. Diagnostic use
* of the InfiniPath chip may render the chip or board unusable until the
* driver is unloaded, or in some cases, until the system is rebooted.
*
* Accesses to the chip through this interface are not similar to going
* through the /sys/bus/pci resource mmap interface.
*/
#include <linux/io.h>
#include <linux/pci.h>
#include <asm/uaccess.h>
#include "ipath_kernel.h"
#include "ipath_common.h"
int ipath_diag_inuse;
static int diag_set_link;
static int ipath_diag_open(struct inode *in, struct file *fp);
static int ipath_diag_release(struct inode *in, struct file *fp);
static ssize_t ipath_diag_read(struct file *fp, char __user *data,
size_t count, loff_t *off);
static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
size_t count, loff_t *off);
static struct file_operations diag_file_ops = {
.owner = THIS_MODULE,
.write = ipath_diag_write,
.read = ipath_diag_read,
.open = ipath_diag_open,
.release = ipath_diag_release
};
int ipath_diag_add(struct ipath_devdata *dd)
{
char name[16];
snprintf(name, sizeof(name), "ipath_diag%d", dd->ipath_unit);
return ipath_cdev_init(IPATH_DIAG_MINOR_BASE + dd->ipath_unit, name,
&diag_file_ops, &dd->diag_cdev,
&dd->diag_class_dev);
}
void ipath_diag_remove(struct ipath_devdata *dd)
{
ipath_cdev_cleanup(&dd->diag_cdev, &dd->diag_class_dev);
}
/**
* ipath_read_umem64 - read a 64-bit quantity from the chip into user space
* @dd: the infinipath device
* @uaddr: the location to store the data in user memory
* @caddr: the source chip address (full pointer, not offset)
* @count: number of bytes to copy (multiple of 32 bits)
*
* This function also localizes all chip memory accesses.
* The copy should be written such that we read full cacheline packets
* from the chip. This is usually used for a single qword
*
* NOTE: This assumes the chip address is 64-bit aligned.
*/
static int ipath_read_umem64(struct ipath_devdata *dd, void __user *uaddr,
const void __iomem *caddr, size_t count)
{
const u64 __iomem *reg_addr = caddr;
const u64 __iomem *reg_end = reg_addr + (count / sizeof(u64));
int ret;
/* not very efficient, but it works for now */
if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
ret = -EINVAL;
goto bail;
}
while (reg_addr < reg_end) {
u64 data = readq(reg_addr);
if (copy_to_user(uaddr, &data, sizeof(u64))) {
ret = -EFAULT;
goto bail;
}
reg_addr++;
uaddr += sizeof(u64);
}
ret = 0;
bail:
return ret;
}
/**
* ipath_write_umem64 - write a 64-bit quantity to the chip from user space
* @dd: the infinipath device
* @caddr: the destination chip address (full pointer, not offset)
* @uaddr: the source of the data in user memory
* @count: the number of bytes to copy (multiple of 32 bits)
*
* This is usually used for a single qword
* NOTE: This assumes the chip address is 64-bit aligned.
*/
static int ipath_write_umem64(struct ipath_devdata *dd, void __iomem *caddr,
const void __user *uaddr, size_t count)
{
u64 __iomem *reg_addr = caddr;
const u64 __iomem *reg_end = reg_addr + (count / sizeof(u64));
int ret;
/* not very efficient, but it works for now */
if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
ret = -EINVAL;
goto bail;
}
while (reg_addr < reg_end) {
u64 data;
if (copy_from_user(&data, uaddr, sizeof(data))) {
ret = -EFAULT;
goto bail;
}
writeq(data, reg_addr);
reg_addr++;
uaddr += sizeof(u64);
}
ret = 0;
bail:
return ret;
}
/**
* ipath_read_umem32 - read a 32-bit quantity from the chip into user space
* @dd: the infinipath device
* @uaddr: the location to store the data in user memory
* @caddr: the source chip address (full pointer, not offset)
* @count: number of bytes to copy
*
* read 32 bit values, not 64 bit; for memories that only
* support 32 bit reads; usually a single dword.
*/
static int ipath_read_umem32(struct ipath_devdata *dd, void __user *uaddr,
const void __iomem *caddr, size_t count)
{
const u32 __iomem *reg_addr = caddr;
const u32 __iomem *reg_end = reg_addr + (count / sizeof(u32));
int ret;
if (reg_addr < (u32 __iomem *) dd->ipath_kregbase ||
reg_end > (u32 __iomem *) dd->ipath_kregend) {
ret = -EINVAL;
goto bail;
}
/* not very efficient, but it works for now */
while (reg_addr < reg_end) {
u32 data = readl(reg_addr);
if (copy_to_user(uaddr, &data, sizeof(data))) {
ret = -EFAULT;
goto bail;
}
reg_addr++;
uaddr += sizeof(u32);
}
ret = 0;
bail:
return ret;
}
/**
* ipath_write_umem32 - write a 32-bit quantity to the chip from user space
* @dd: the infinipath device
* @caddr: the destination chip address (full pointer, not offset)
* @uaddr: the source of the data in user memory
* @count: number of bytes to copy
*
* write 32 bit values, not 64 bit; for memories that only
* support 32 bit write; usually a single dword.
*/
static int ipath_write_umem32(struct ipath_devdata *dd, void __iomem *caddr,
const void __user *uaddr, size_t count)
{
u32 __iomem *reg_addr = caddr;
const u32 __iomem *reg_end = reg_addr + (count / sizeof(u32));
int ret;
if (reg_addr < (u32 __iomem *) dd->ipath_kregbase ||
reg_end > (u32 __iomem *) dd->ipath_kregend) {
ret = -EINVAL;
goto bail;
}
while (reg_addr < reg_end) {
u32 data;
if (copy_from_user(&data, uaddr, sizeof(data))) {
ret = -EFAULT;
goto bail;
}
writel(data, reg_addr);
reg_addr++;
uaddr += sizeof(u32);
}
ret = 0;
bail:
return ret;
}
static int ipath_diag_open(struct inode *in, struct file *fp)
{
int unit = iminor(in) - IPATH_DIAG_MINOR_BASE;
struct ipath_devdata *dd;
int ret;
mutex_lock(&ipath_mutex);
if (ipath_diag_inuse) {
ret = -EBUSY;
goto bail;
}
dd = ipath_lookup(unit);
if (dd == NULL || !(dd->ipath_flags & IPATH_PRESENT) ||
!dd->ipath_kregbase) {
ret = -ENODEV;
goto bail;
}
fp->private_data = dd;
ipath_diag_inuse = 1;
diag_set_link = 0;
ret = 0;
/* Only expose a way to reset the device if we
make it into diag mode. */
ipath_expose_reset(&dd->pcidev->dev);
bail:
mutex_unlock(&ipath_mutex);
return ret;
}
static ssize_t ipath_diagpkt_write(struct file *fp,
const char __user *data,
size_t count, loff_t *off);
static struct file_operations diagpkt_file_ops = {
.owner = THIS_MODULE,
.write = ipath_diagpkt_write,
};
static struct cdev *diagpkt_cdev;
static struct class_device *diagpkt_class_dev;
int __init ipath_diagpkt_add(void)
{
return ipath_cdev_init(IPATH_DIAGPKT_MINOR,
"ipath_diagpkt", &diagpkt_file_ops,
&diagpkt_cdev, &diagpkt_class_dev);
}
void __exit ipath_diagpkt_remove(void)
{
ipath_cdev_cleanup(&diagpkt_cdev, &diagpkt_class_dev);
}
/**
* ipath_diagpkt_write - write an IB packet
* @fp: the diag data device file pointer
* @data: ipath_diag_pkt structure saying where to get the packet
* @count: size of data to write
* @off: unused by this code
*/
static ssize_t ipath_diagpkt_write(struct file *fp,
const char __user *data,
size_t count, loff_t *off)
{
u32 __iomem *piobuf;
u32 plen, clen, pbufn;
struct ipath_diag_pkt dp;
u32 *tmpbuf = NULL;
struct ipath_devdata *dd;
ssize_t ret = 0;
u64 val;
if (count < sizeof(dp)) {
ret = -EINVAL;
goto bail;
}
if (copy_from_user(&dp, data, sizeof(dp))) {
ret = -EFAULT;
goto bail;
}
/* send count must be an exact number of dwords */
if (dp.len & 3) {
ret = -EINVAL;
goto bail;
}
clen = dp.len >> 2;
dd = ipath_lookup(dp.unit);
if (!dd || !(dd->ipath_flags & IPATH_PRESENT) ||
!dd->ipath_kregbase) {
ipath_cdbg(VERBOSE, "illegal unit %u for diag data send\n",
dp.unit);
ret = -ENODEV;
goto bail;
}
if (ipath_diag_inuse && !diag_set_link &&
!(dd->ipath_flags & IPATH_LINKACTIVE)) {
diag_set_link = 1;
ipath_cdbg(VERBOSE, "Trying to set to set link active for "
"diag pkt\n");
ipath_set_linkstate(dd, IPATH_IB_LINKARM);
ipath_set_linkstate(dd, IPATH_IB_LINKACTIVE);
}
if (!(dd->ipath_flags & IPATH_INITTED)) {
/* no hardware, freeze, etc. */
ipath_cdbg(VERBOSE, "unit %u not usable\n", dd->ipath_unit);
ret = -ENODEV;
goto bail;
}
val = dd->ipath_lastibcstat & IPATH_IBSTATE_MASK;
if (val != IPATH_IBSTATE_INIT && val != IPATH_IBSTATE_ARM &&
val != IPATH_IBSTATE_ACTIVE) {
ipath_cdbg(VERBOSE, "unit %u not ready (state %llx)\n",
dd->ipath_unit, (unsigned long long) val);
ret = -EINVAL;
goto bail;
}
/* need total length before first word written */
/* +1 word is for the qword padding */
plen = sizeof(u32) + dp.len;
if ((plen + 4) > dd->ipath_ibmaxlen) {
ipath_dbg("Pkt len 0x%x > ibmaxlen %x\n",
plen - 4, dd->ipath_ibmaxlen);
ret = -EINVAL;
goto bail; /* before writing pbc */
}
tmpbuf = vmalloc(plen);
if (!tmpbuf) {
dev_info(&dd->pcidev->dev, "Unable to allocate tmp buffer, "
"failing\n");
ret = -ENOMEM;
goto bail;
}
if (copy_from_user(tmpbuf,
(const void __user *) (unsigned long) dp.data,
dp.len)) {
ret = -EFAULT;
goto bail;
}
piobuf = ipath_getpiobuf(dd, &pbufn);
if (!piobuf) {
ipath_cdbg(VERBOSE, "No PIO buffers avail unit for %u\n",
dd->ipath_unit);
ret = -EBUSY;
goto bail;
}
plen >>= 2; /* in dwords */
if (ipath_debug & __IPATH_PKTDBG)
ipath_cdbg(VERBOSE, "unit %u 0x%x+1w pio%d\n",
dd->ipath_unit, plen - 1, pbufn);
/* we have to flush after the PBC for correctness on some cpus
* or WC buffer can be written out of order */
writeq(plen, piobuf);
ipath_flush_wc();
/* copy all by the trigger word, then flush, so it's written
* to chip before trigger word, then write trigger word, then
* flush again, so packet is sent. */
__iowrite32_copy(piobuf + 2, tmpbuf, clen - 1);
ipath_flush_wc();
__raw_writel(tmpbuf[clen - 1], piobuf + clen + 1);
ipath_flush_wc();
ret = sizeof(dp);
bail:
vfree(tmpbuf);
return ret;
}
static int ipath_diag_release(struct inode *in, struct file *fp)
{
mutex_lock(&ipath_mutex);
ipath_diag_inuse = 0;
fp->private_data = NULL;
mutex_unlock(&ipath_mutex);
return 0;
}
static ssize_t ipath_diag_read(struct file *fp, char __user *data,
size_t count, loff_t *off)
{
struct ipath_devdata *dd = fp->private_data;
void __iomem *kreg_base;
ssize_t ret;
kreg_base = dd->ipath_kregbase;
if (count == 0)
ret = 0;
else if ((count % 4) || (*off % 4))
/* address or length is not 32-bit aligned, hence invalid */
ret = -EINVAL;
else if ((count % 8) || (*off % 8))
/* address or length not 64-bit aligned; do 32-bit reads */
ret = ipath_read_umem32(dd, data, kreg_base + *off, count);
else
ret = ipath_read_umem64(dd, data, kreg_base + *off, count);
if (ret >= 0) {
*off += count;
ret = count;
}
return ret;
}
static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
size_t count, loff_t *off)
{
struct ipath_devdata *dd = fp->private_data;
void __iomem *kreg_base;
ssize_t ret;
kreg_base = dd->ipath_kregbase;
if (count == 0)
ret = 0;
else if ((count % 4) || (*off % 4))
/* address or length is not 32-bit aligned, hence invalid */
ret = -EINVAL;
else if ((count % 8) || (*off % 8))
/* address or length not 64-bit aligned; do 32-bit writes */
ret = ipath_write_umem32(dd, kreg_base + *off, data, count);
else
ret = ipath_write_umem64(dd, kreg_base + *off, data, count);
if (ret >= 0) {
*off += count;
ret = count;
}
return ret;
}