[ALSA] Add snd-miro driver
Added snd-miro driver for miroSOUND PCM by Martin Langer.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/isa/opti9xx/miro.h b/sound/isa/opti9xx/miro.h
new file mode 100644
index 0000000..6e1385b
--- /dev/null
+++ b/sound/isa/opti9xx/miro.h
@@ -0,0 +1,73 @@
+#ifndef _MIRO_H_
+#define _MIRO_H_
+
+#define ACI_REG_COMMAND 0 /* write register offset */
+#define ACI_REG_STATUS 1 /* read register offset */
+#define ACI_REG_BUSY 2 /* busy register offset */
+#define ACI_REG_RDS 2 /* PCM20: RDS register offset */
+#define ACI_MINTIME 500 /* ACI time out limit */
+
+#define ACI_SET_MUTE 0x0d
+#define ACI_SET_POWERAMP 0x0f
+#define ACI_SET_TUNERMUTE 0xa3
+#define ACI_SET_TUNERMONO 0xa4
+#define ACI_SET_IDE 0xd0
+#define ACI_SET_WSS 0xd1
+#define ACI_SET_SOLOMODE 0xd2
+#define ACI_SET_PREAMP 0x03
+#define ACI_GET_PREAMP 0x21
+#define ACI_WRITE_TUNE 0xa7
+#define ACI_READ_TUNERSTEREO 0xa8
+#define ACI_READ_TUNERSTATION 0xa9
+#define ACI_READ_VERSION 0xf1
+#define ACI_READ_IDCODE 0xf2
+#define ACI_INIT 0xff
+#define ACI_STATUS 0xf0
+#define ACI_S_GENERAL 0x00
+#define ACI_ERROR_OP 0xdf
+
+/* ACI Mixer */
+
+/* These are the values for the right channel GET registers.
+ Add an offset of 0x01 for the left channel register.
+ (left=right+0x01) */
+
+#define ACI_GET_MASTER 0x03
+#define ACI_GET_MIC 0x05
+#define ACI_GET_LINE 0x07
+#define ACI_GET_CD 0x09
+#define ACI_GET_SYNTH 0x0b
+#define ACI_GET_PCM 0x0d
+#define ACI_GET_LINE1 0x10 /* Radio on PCM20 */
+#define ACI_GET_LINE2 0x12
+
+#define ACI_GET_EQ1 0x22 /* from Bass ... */
+#define ACI_GET_EQ2 0x24
+#define ACI_GET_EQ3 0x26
+#define ACI_GET_EQ4 0x28
+#define ACI_GET_EQ5 0x2a
+#define ACI_GET_EQ6 0x2c
+#define ACI_GET_EQ7 0x2e /* ... to Treble */
+
+/* And these are the values for the right channel SET registers.
+ For left channel access you have to add an offset of 0x08.
+ MASTER is an exception, which needs an offset of 0x01 */
+
+#define ACI_SET_MASTER 0x00
+#define ACI_SET_MIC 0x30
+#define ACI_SET_LINE 0x31
+#define ACI_SET_CD 0x34
+#define ACI_SET_SYNTH 0x33
+#define ACI_SET_PCM 0x32
+#define ACI_SET_LINE1 0x35 /* Radio on PCM20 */
+#define ACI_SET_LINE2 0x36
+
+#define ACI_SET_EQ1 0x40 /* from Bass ... */
+#define ACI_SET_EQ2 0x41
+#define ACI_SET_EQ3 0x42
+#define ACI_SET_EQ4 0x43
+#define ACI_SET_EQ5 0x44
+#define ACI_SET_EQ6 0x45
+#define ACI_SET_EQ7 0x46 /* ... to Treble */
+
+#endif /* _MIRO_H_ */