arm/dt: msm8610: Add support for booting up the modem subsystem
Add the necessary PIL device entry that will allow the
PIL MSS driver to load and boot the modem on the MSM8610.
Change-Id: I120fd14b7c7da96c654d174d20eacc6c5ec82db3
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
diff --git a/arch/arm/boot/dts/msm8610.dtsi b/arch/arm/boot/dts/msm8610.dtsi
index 53d0d5d..b6a6c74 100644
--- a/arch/arm/boot/dts/msm8610.dtsi
+++ b/arch/arm/boot/dts/msm8610.dtsi
@@ -429,6 +429,28 @@
compatible = "qcom,msm-pcm-hostless";
};
+ qcom,mss@fc880000 {
+ compatible = "qcom,pil-q6v5-mss";
+ reg = <0xfc880000 0x100>,
+ <0xfd485000 0x400>,
+ <0xfc820000 0x020>,
+ <0xfc401680 0x004>,
+ <0x0d1fc000 0x4000>,
+ <0xfd485194 0x4>;
+ reg-names = "qdsp6_base", "halt_base", "rmb_base",
+ "restart_reg", "metadata_base", "cxrail_bhs_reg";
+
+ interrupts = <0 24 1>;
+ vdd_mss-supply = <&pm8110_s1>;
+ vdd_cx-supply = <&pm8110_s1_corner>;
+ vdd_mx-supply = <&pm8110_l3>;
+ vdd_pll-supply = <&pm8110_l10>;
+ qcom,vdd_pll = <1800000>;
+ qcom,is-loadable;
+ qcom,firmware-name = "mba";
+ qcom,pil-self-auth;
+ };
+
qcom,lpass@fe200000 {
compatible = "qcom,pil-q6v5-lpass";
reg = <0xfe200000 0x00100>,