| config ASOC_SAMSUNG |
| tristate "ASoC support for Samsung" |
| depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 |
| select S3C64XX_DMA if ARCH_S3C64XX |
| select S3C2410_DMA if ARCH_S3C2410 |
| help |
| Say Y or M if you want to add support for codecs attached to |
| the Samsung SoCs' Audio interfaces. You will also need to |
| select the audio interfaces to support below. |
| |
| config SND_S3C24XX_I2S |
| tristate |
| select S3C2410_DMA |
| |
| config SND_S3C_I2SV2_SOC |
| tristate |
| |
| config SND_S3C2412_SOC_I2S |
| tristate |
| select SND_S3C_I2SV2_SOC |
| select S3C2410_DMA |
| |
| config SND_SAMSUNG_PCM |
| tristate |
| |
| config SND_SAMSUNG_AC97 |
| tristate |
| select SND_SOC_AC97_BUS |
| |
| config SND_SAMSUNG_SPDIF |
| tristate |
| select SND_SOC_SPDIF |
| |
| config SND_SAMSUNG_I2S |
| tristate |
| |
| config ASOC_SAMSUNG_NEO1973_WM8753 |
| tristate "SoC I2S Audio support for NEO1973 - WM8753" |
| depends on ASOC_SAMSUNG && MACH_NEO1973_GTA01 |
| select SND_S3C24XX_I2S |
| select SND_SOC_WM8753 |
| help |
| Say Y if you want to add support for SoC audio on smdk2440 |
| with the WM8753. |
| |
| config ASOC_SAMSUNG_NEO1973_GTA02_WM8753 |
| tristate "Audio support for the Openmoko Neo FreeRunner (GTA02)" |
| depends on ASOC_SAMSUNG && MACH_NEO1973_GTA02 |
| select SND_S3C24XX_I2S |
| select SND_SOC_WM8753 |
| help |
| This driver provides audio support for the Openmoko Neo FreeRunner |
| smartphone. |
| |
| config ASOC_SAMSUNG_JIVE_WM8750 |
| tristate "SoC I2S Audio support for Jive" |
| depends on ASOC_SAMSUNG && MACH_JIVE |
| select SND_SOC_WM8750 |
| select SND_S3C2412_SOC_I2S |
| help |
| Sat Y if you want to add support for SoC audio on the Jive. |
| |
| config ASOC_SAMSUNG_SMDK_WM8580 |
| tristate "SoC I2S Audio support for WM8580 on SMDK" |
| depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100) |
| select SND_SOC_WM8580 |
| select SND_SAMSUNG_I2S |
| help |
| Say Y if you want to add support for SoC audio on the SMDKs. |
| |
| config ASOC_SAMSUNG_SMDK2443_WM9710 |
| tristate "SoC AC97 Audio support for SMDK2443 - WM9710" |
| depends on ASOC_SAMSUNG && MACH_SMDK2443 |
| select S3C2410_DMA |
| select AC97_BUS |
| select SND_SOC_AC97_CODEC |
| select SND_SAMSUNG_AC97 |
| help |
| Say Y if you want to add support for SoC audio on smdk2443 |
| with the WM9710. |
| |
| config ASOC_SAMSUNG_LN2440SBC_ALC650 |
| tristate "SoC AC97 Audio support for LN2440SBC - ALC650" |
| depends on ASOC_SAMSUNG && ARCH_S3C2410 |
| select S3C2410_DMA |
| select AC97_BUS |
| select SND_SOC_AC97_CODEC |
| select SND_SAMSUNG_AC97 |
| help |
| Say Y if you want to add support for SoC audio on ln2440sbc |
| with the ALC650. |
| |
| config ASOC_SAMSUNG_S3C24XX_UDA134X |
| tristate "SoC I2S Audio support UDA134X wired to a S3C24XX" |
| depends on ASOC_SAMSUNG && ARCH_S3C2410 |
| select SND_S3C24XX_I2S |
| select SND_SOC_L3 |
| select SND_SOC_UDA134X |
| |
| config ASOC_SAMSUNG_SIMTEC |
| tristate |
| help |
| Internal node for common S3C24XX/Simtec suppor |
| |
| config ASOC_SAMSUNG_SIMTEC_TLV320AIC23 |
| tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards" |
| depends on ASOC_SAMSUNG && ARCH_S3C2410 |
| select SND_S3C24XX_I2S |
| select SND_SOC_TLV320AIC23 |
| select ASOC_SAMSUNG_SIMTEC |
| |
| config ASOC_SAMSUNG_SIMTEC_HERMES |
| tristate "SoC I2S Audio support for Simtec Hermes board" |
| depends on ASOC_SAMSUNG && ARCH_S3C2410 |
| select SND_S3C24XX_I2S |
| select SND_SOC_TLV320AIC3X |
| select ASOC_SAMSUNG_SIMTEC |
| |
| config ASOC_SAMSUNG_H1940_UDA1380 |
| tristate "Audio support for the HP iPAQ H1940" |
| depends on ASOC_SAMSUNG && ARCH_H1940 |
| select SND_S3C24XX_I2S |
| select SND_SOC_UDA1380 |
| help |
| This driver provides audio support for HP iPAQ h1940 PDA. |
| |
| config ASOC_SAMSUNG_RX1950_UDA1380 |
| tristate "Audio support for the HP iPAQ RX1950" |
| depends on ASOC_SAMSUNG && MACH_RX1950 |
| select SND_S3C24XX_I2S |
| select SND_SOC_UDA1380 |
| help |
| This driver provides audio support for HP iPAQ RX1950 PDA. |
| |
| config ASOC_SAMSUNG_SMDK_WM9713 |
| tristate "SoC AC97 Audio support for SMDK with WM9713" |
| depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110) |
| select SND_SOC_WM9713 |
| select SND_SAMSUNG_AC97 |
| help |
| Sat Y if you want to add support for SoC audio on the SMDK. |
| |
| config ASOC_SMARTQ |
| tristate "SoC I2S Audio support for SmartQ board" |
| depends on ASOC_SAMSUNG && MACH_SMARTQ |
| select SND_SAMSUNG_I2S |
| select SND_SOC_WM8750 |
| |
| config ASOC_GONI_AQUILA_WM8994 |
| tristate "SoC I2S Audio support for AQUILA/GONI - WM8994" |
| depends on ASOC_SAMSUNG && (MACH_GONI || MACH_AQUILA) |
| select SND_SAMSUNG_I2S |
| select SND_SOC_WM8994 |
| help |
| Say Y if you want to add support for SoC audio on goni or aquila |
| with the WM8994. |
| |
| config ASOC_SAMSUNG_SMDK_SPDIF |
| tristate "SoC S/PDIF Audio support for SMDK" |
| depends on ASOC_SAMSUNG && (MACH_SMDKC100 || MACH_SMDKC110 || MACH_SMDKV210) |
| select SND_SAMSUNG_SPDIF |
| help |
| Say Y if you want to add support for SoC S/PDIF audio on the SMDK. |