diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl
index d858d92..4a38f60 100644
--- a/Documentation/DocBook/sh.tmpl
+++ b/Documentation/DocBook/sh.tmpl
@@ -79,10 +79,6 @@
       </sect2>
     </sect1>
   </chapter>
-  <chapter id="clk">
-    <title>Clock Framework Extensions</title>
-!Iinclude/linux/sh_clk.h
-  </chapter>
   <chapter id="mach">
     <title>Machine Specific Interfaces</title>
     <sect1 id="dreamcast">
diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX
index a618fd9..30a7054 100644
--- a/Documentation/fb/00-INDEX
+++ b/Documentation/fb/00-INDEX
@@ -4,33 +4,41 @@
 				    Geert Uytterhoeven <geert@linux-m68k.org>
 
 00-INDEX
-	- this file
+	- this file.
 arkfb.txt
 	- info on the fbdev driver for ARK Logic chips.
 aty128fb.txt
 	- info on the ATI Rage128 frame buffer driver.
 cirrusfb.txt
 	- info on the driver for Cirrus Logic chipsets.
+cmap_xfbdev.txt
+	- an introduction to fbdev's cmap structures.
 deferred_io.txt
 	- an introduction to deferred IO.
+efifb.txt
+	- info on the EFI platform driver for Intel based Apple computers.
+ep93xx-fb.txt
+	- info on the driver for EP93xx LCD controller.
 fbcon.txt
 	- intro to and usage guide for the framebuffer console (fbcon).
 framebuffer.txt
 	- introduction to frame buffer devices.
-imacfb.txt
-	- info on the generic EFI platform driver for Intel based Macs.
+gxfb.txt
+	- info on the framebuffer driver for AMD Geode GX2 based processors.
 intel810.txt
 	- documentation for the Intel 810/815 framebuffer driver.
 intelfb.txt
 	- docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver.
 internals.txt
 	- quick overview of frame buffer device internals.
+lxfb.txt
+	- info on the framebuffer driver for AMD Geode LX based processors.
 matroxfb.txt
 	- info on the Matrox framebuffer driver for Alpha, Intel and PPC.
+metronomefb.txt
+	- info on the driver for the Metronome display controller.
 modedb.txt
 	- info on the video mode database.
-matroxfb.txt
-	- info on the Matrox frame buffer driver.
 pvr2fb.txt
 	- info on the PowerVR 2 frame buffer driver.
 pxafb.txt
@@ -39,13 +47,23 @@
 	- info on the fbdev driver for S3 Trio/Virge chips.
 sa1100fb.txt
 	- information about the driver for the SA-1100 LCD controller.
+sh7760fb.txt
+	- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
 sisfb.txt
 	- info on the framebuffer device driver for various SiS chips.
 sstfb.txt
 	- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
 tgafb.txt
-	- info on the TGA (DECChip 21030) frame buffer driver
+	- info on the TGA (DECChip 21030) frame buffer driver.
+tridentfb.txt
+	info on the framebuffer driver for some Trident chip based cards.
+uvesafb.txt
+	- info on the userspace VESA (VBE2+ compliant) frame buffer device.
 vesafb.txt
-	- info on the VESA frame buffer device
+	- info on the VESA frame buffer device.
+viafb.modes
+	- list of modes for VIA Integration Graphic Chip.
+viafb.txt
+	- info on the VIA Integration Graphic Chip console framebuffer driver.
 vt8623fb.txt
 	- info on the fb driver for the graphics core in VIA VT8623 chipsets.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 92e83e5..cdd2a6e 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2385,6 +2385,11 @@
 			improve throughput, but will also increase the
 			amount of memory reserved for use by the client.
 
+	swapaccount[=0|1]
+			[KNL] Enable accounting of swap in memory resource
+			controller if no parameter or 1 is given or disable
+			it if 0 is given (See Documentation/cgroups/memory.txt)
+
 	swiotlb=	[IA-64] Number of I/O TLB slabs
 
 	switches=	[HW,M68k]
diff --git a/Documentation/sh/clk.txt b/Documentation/sh/clk.txt
deleted file mode 100644
index 114b595..0000000
--- a/Documentation/sh/clk.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Clock framework on SuperH architecture
-
-The framework on SH extends existing API by the function clk_set_rate_ex,
-which prototype is as follows:
-
-    clk_set_rate_ex (struct clk *clk, unsigned long rate, int algo_id)
-
-The algo_id parameter is used to specify algorithm used to recalculate clocks,
-adjanced to clock, specified as first argument. It is assumed that algo_id==0
-means no changes to adjanced clock
-
-Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method,
-if it is present in ops structure. The method should set the clock rate and adjust
-all needed clocks according to the passed algo_id.
-Exact values for algo_id are machine-dependent. For the sh7722, the following
-values are defined:
-
-	NO_CHANGE	= 0,
-	IUS_N1_N1,	/* I:U = N:1, U:Sh = N:1 */
-	IUS_322,	/* I:U:Sh = 3:2:2	 */
-	IUS_522,	/* I:U:Sh = 5:2:2 	 */
-	IUS_N11,	/* I:U:Sh = N:1:1	 */
-	SB_N1,		/* Sh:B = N:1		 */
-	SB3_N1,		/* Sh:B3 = N:1		 */
-	SB3_32,		/* Sh:B3 = 3:2		 */
-	SB3_43,		/* Sh:B3 = 4:3		 */
-	SB3_54,		/* Sh:B3 = 5:4		 */
-	BP_N1,		/* B:P	 = N:1		 */
-	IP_N1		/* I:P	 = N:1		 */
-
-Each of these constants means relation between clocks that can be set via the FRQCR
-register
diff --git a/MAINTAINERS b/MAINTAINERS
index a92c994..b3be8b3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1359,7 +1359,7 @@
 
 BONDING DRIVER
 M:	Jay Vosburgh <fubar@us.ibm.com>
-L:	bonding-devel@lists.sourceforge.net
+L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
 F:	drivers/net/bonding/
@@ -2444,10 +2444,12 @@
 FRAMEBUFFER LAYER
 L:	linux-fbdev@vger.kernel.org
 W:	http://linux-fbdev.sourceforge.net/
+Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
 S:	Orphan
 F:	Documentation/fb/
-F:	drivers/video/fb*
+F:	drivers/video/
+F:	include/video/
 F:	include/linux/fb.h
 
 FREESCALE DMA DRIVER
@@ -5837,6 +5839,8 @@
 W:	http://www.tilera.com/scm/
 S:	Supported
 F:	arch/tile/
+F:	drivers/char/hvc_tile.c
+F:	drivers/net/tile/
 
 TLAN NETWORK DRIVER
 M:	Samuel Chessman <chessman@tux.org>
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 6825c34..9be21ba 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -1084,6 +1084,6 @@
 reloc_end:
 
 		.align
-		.section ".stack", "w"
+		.section ".stack", "aw", %nobits
 user_stack:	.space	4096
 user_stack_end:
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index d081689..366a924 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -57,7 +57,7 @@
   .bss			: { *(.bss) }
   _end = .;
 
-  .stack (NOLOAD)	: { *(.stack) }
+  .stack		: { *(.stack) }
 
   .stab 0		: { *(.stab) }
   .stabstr 0		: { *(.stabstr) }
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 062b58c..749bb66 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -238,7 +238,7 @@
 	@ Slightly optimised to avoid incrementing the pointer twice
 	usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
 	.if	\rept == 2
-	usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+	usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
 	.endif
 
 	add\cond \ptr, #\rept * \inc
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index 68870c7..b4ffe9d 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -13,6 +13,10 @@
 
 #ifdef CONFIG_CPU_HAS_ASID
 #define ASID(mm)	((mm)->context.id & 255)
+
+/* init_mm.context.id_lock should be initialized. */
+#define INIT_MM_CONTEXT(name)                                                 \
+	.context.id_lock    = __SPIN_LOCK_UNLOCKED(name.context.id_lock),
 #else
 #define ASID(mm)	(0)
 #endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index b155414..53d1d5d 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -374,6 +374,9 @@
 
 #define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
 
+/* we don't need complex calculations here as the pmd is folded into the pgd */
+#define pmd_addr_end(addr,end)	(end)
+
 /*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index 1e4cbd4..64f6bc1 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -174,8 +174,8 @@
  */
 .L_found:
 #if __LINUX_ARM_ARCH__ >= 5
-		rsb	r1, r3, #0
-		and	r3, r3, r1
+		rsb	r0, r3, #0
+		and	r3, r3, r0
 		clz	r3, r3
 		rsb	r3, r3, #31
 		add	r0, r2, r3
@@ -190,5 +190,7 @@
 		addeq	r2, r2, #1
 		mov	r0, r2
 #endif
+		cmp	r1, r0			@ Clamp to maxbit
+		movlo	r0, r1
 		mov	pc, lr
 
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
index cff4e0a..a6299e8 100644
--- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -11,6 +11,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END		0xd0000000
+#define VMALLOC_END		0xd0000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
index 3db3a09..7397bd7 100644
--- a/arch/arm/mach-bcmring/include/mach/vmalloc.h
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -22,4 +22,4 @@
  * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
  * larger physical memory designs better.
  */
-#define VMALLOC_END       0xf0000000
+#define VMALLOC_END       0xf0000000UL
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
index 30b3a287..467b961 100644
--- a/arch/arm/mach-clps711x/include/mach/vmalloc.h
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 9be261b..2652af1 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -359,8 +359,8 @@
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK("davinci-asp.0", NULL, &asp0_clk),
-	CLK("davinci-asp.1", NULL, &asp1_clk),
+	CLK("davinci-mcbsp.0", NULL, &asp0_clk),
+	CLK("davinci-mcbsp.1", NULL, &asp1_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
 	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
 	CLK("spi_davinci.0", NULL, &spi0_clk),
@@ -664,7 +664,7 @@
 };
 
 static struct platform_device dm355_asp1_device = {
-	.name		= "davinci-asp",
+	.name		= "davinci-mcbsp",
 	.id		= 1,
 	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
 	.resource	= dm355_asp1_resources,
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index a12065e..c466d71 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -459,7 +459,7 @@
 	CLK(NULL, "usb", &usb_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("davinci_voicecodec", NULL, &voicecodec_clk),
-	CLK("davinci-asp.0", NULL, &asp0_clk),
+	CLK("davinci-mcbsp", NULL, &asp0_clk),
 	CLK(NULL, "rto", &rto_clk),
 	CLK(NULL, "mjcp", &mjcp_clk),
 	CLK(NULL, NULL, NULL),
@@ -922,8 +922,8 @@
 };
 
 static struct platform_device dm365_asp_device = {
-	.name		= "davinci-asp",
-	.id		= 0,
+	.name		= "davinci-mcbsp",
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(dm365_asp_resources),
 	.resource	= dm365_asp_resources,
 };
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 0608dd7..9a2376b 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -302,7 +302,7 @@
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("palm_bk3710", NULL, &ide_clk),
-	CLK("davinci-asp", NULL, &asp_clk),
+	CLK("davinci-mcbsp", NULL, &asp_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
 	CLK(NULL, "spi", &spi_clk),
 	CLK(NULL, "gpio", &gpio_clk),
@@ -580,7 +580,7 @@
 };
 
 static struct platform_device dm644x_asp_device = {
-	.name		= "davinci-asp",
+	.name		= "davinci-mcbsp",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(dm644x_asp_resources),
 	.resource	= dm644x_asp_resources,
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
index 60bde56..ea141b7 100644
--- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       0xdf000000
+#define VMALLOC_END       0xdf000000UL
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
index 0ffbb7c..40ba78e 100644
--- a/arch/arm/mach-footbridge/include/mach/vmalloc.h
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  */
 
 
-#define VMALLOC_END       0xf0000000
+#define VMALLOC_END       0xf0000000UL
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
index a45915b..8520b4a 100644
--- a/arch/arm/mach-h720x/include/mach/vmalloc.h
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -5,6 +5,6 @@
 #ifndef __ARCH_ARM_VMALLOC_H
 #define __ARCH_ARM_VMALLOC_H
 
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
 
 #endif
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 026263c..7e1e9dc 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -250,9 +250,6 @@
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
 #define ADS7846_PENDOWN (GPIO_PORTD | 25)
 
 static void ads7846_dev_init(void)
@@ -273,9 +270,7 @@
 	.get_pendown_state	= ads7846_get_pendown_state,
 	.keep_vref_on		= 1,
 };
-#endif
 
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
 	[0] = {
 		.modalias	= "ads7846",
@@ -294,7 +289,6 @@
 	.chipselect	= eukrea_mbimx27_spi_cs,
 	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
 };
-#endif
 
 static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
 	{
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
index e056e7c..2f5a2ba 100644
--- a/arch/arm/mach-integrator/include/mach/vmalloc.h
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
index 31a32ad..d138448 100644
--- a/arch/arm/mach-msm/include/mach/vmalloc.h
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -16,7 +16,7 @@
 #ifndef __ASM_ARCH_MSM_VMALLOC_H
 #define __ASM_ARCH_MSM_VMALLOC_H
 
-#define VMALLOC_END	  0xd0000000
+#define VMALLOC_END	  0xd0000000UL
 
 #endif
 
diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h
index 93afa10..d94d282 100644
--- a/arch/arm/mach-mx25/devices-imx25.h
+++ b/arch/arm/mach-mx25/devices-imx25.h
@@ -42,9 +42,9 @@
 #define imx25_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
 
-extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
+extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
 #define imx25_add_spi_imx(id, pdata)	\
-	imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
+	imx_add_spi_imx(&imx25_cspi_data[id], pdata)
 #define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
 #define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
 #define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 99e0894..fda5654 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -14,6 +14,7 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
+#include <mach/spi.h>
 
 #include <asm/mach-types.h>
 
@@ -59,14 +60,12 @@
 };
 
 /* Platform Data for MXC CSPI */
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
 
 static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
 	.chipselect = pcm037_spi1_cs,
 	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
 };
-#endif
 
 /* GPIO-keys input device */
 static struct gpio_keys_button pcm037_gpio_keys[] = {
@@ -171,7 +170,7 @@
 	},
 };
 
-static int eet_init_devices(void)
+static int __init eet_init_devices(void)
 {
 	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
 		return 0;
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
index 7cca357..871f1ef 100644
--- a/arch/arm/mach-netx/include/mach/vmalloc.h
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -16,4 +16,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
index b001f67..22ec4a4 100644
--- a/arch/arm/mach-omap1/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap1/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	0xd8000000
+#define VMALLOC_END	0xd8000000UL
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
index 4da31e9..8663199 100644
--- a/arch/arm/mach-omap2/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap2/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  0xf8000000
+#define VMALLOC_END	  0xf8000000UL
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
index 31b65ee..184913c 100644
--- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
  * area for the same reason. ;)
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
index 3bcd86f..fb70022 100644
--- a/arch/arm/mach-rpc/include/mach/vmalloc.h
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       0xdc000000
+#define VMALLOC_END       0xdc000000UL
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 8aa2f19..6b86a72 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -77,13 +77,13 @@
 
 	/* Configures BT serial port GPIOs */
 	s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
-	s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
-	s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
-	s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
-	s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
 
 
 	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 084d121..00174da 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -168,12 +168,11 @@
 
 static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 {
-	s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
+	s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
 }
 
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
 
 static void s3c2416_irq_uart3_mask(unsigned int irqno)
 {
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 0e0d693..8934247 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -166,12 +166,11 @@
 
 static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 {
-	s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
+	s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
 }
 
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
 
 static void s3c2443_irq_uart3_mask(unsigned int irqno)
 {
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 249c629..89f35e0 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -45,7 +45,7 @@
 
 #include <video/platform_lcd.h>
 
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index f9ef9b5..4957ab0 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -46,7 +46,7 @@
 
 #include <video/platform_lcd.h>
 
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 0ad7924..5dd1681 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/i2c.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index bcd7a5d..1fbc45b 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
index 8e845b6..b10df98 100644
--- a/arch/arm/mach-shark/include/mach/vmalloc.h
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
 /*
  * arch/arm/mach-shark/include/mach/vmalloc.h
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index d326054..d440e5f 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -567,38 +567,127 @@
 
 /* FSI */
 #define IRQ_FSI		evt2irq(0x1840)
+static int __fsi_set_rate(struct clk *clk, long rate, int enable)
+{
+	int ret = 0;
 
-static int fsi_set_rate(int is_porta, int rate)
+	if (rate <= 0)
+		return ret;
+
+	if (enable) {
+		ret = clk_set_rate(clk, rate);
+		if (0 == ret)
+			ret = clk_enable(clk);
+	} else {
+		clk_disable(clk);
+	}
+
+	return ret;
+}
+
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+	return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
+}
+
+static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
+{
+	struct clk *fsia_ick;
+	struct clk *fsiack;
+	int ret = -EIO;
+
+	fsia_ick = clk_get(dev, "icka");
+	if (IS_ERR(fsia_ick))
+		return PTR_ERR(fsia_ick);
+
+	/*
+	 * FSIACK is connected to AK4642,
+	 * and use external clock pin from it.
+	 * it is parent of fsia_ick now.
+	 */
+	fsiack = clk_get_parent(fsia_ick);
+	if (!fsiack)
+		goto fsia_ick_out;
+
+	/*
+	 * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
+	 *
+	 ** FIXME **
+	 * Because the freq_table of external clk (fsiack) are all 0,
+	 * the return value of clk_round_rate became 0.
+	 * So, it use __fsi_set_rate here.
+	 */
+	ret = __fsi_set_rate(fsiack, rate, enable);
+	if (ret < 0)
+		goto fsiack_out;
+
+	ret = __fsi_set_round_rate(fsia_ick, rate, enable);
+	if ((ret < 0) && enable)
+		__fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
+
+fsiack_out:
+	clk_put(fsiack);
+
+fsia_ick_out:
+	clk_put(fsia_ick);
+
+	return 0;
+}
+
+static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
 {
 	struct clk *fsib_clk;
 	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+	long fsib_rate = 0;
+	long fdiv_rate = 0;
+	int ackmd_bpfmd;
 	int ret;
 
-	/* set_rate is not needed if port A */
-	if (is_porta)
-		return 0;
-
-	fsib_clk = clk_get(NULL, "fsib_clk");
-	if (IS_ERR(fsib_clk))
-		return -EINVAL;
-
 	switch (rate) {
 	case 44100:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		fsib_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
 		break;
 	case 48000:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
-		clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		fsib_rate	= 85428000; /* around 48kHz x 256 x 7 */
+		fdiv_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
 		break;
 	default:
 		pr_err("unsupported rate in FSI2 port B\n");
-		ret = -EINVAL;
-		break;
+		return -EINVAL;
 	}
 
+	/* FSI B setting */
+	fsib_clk = clk_get(dev, "ickb");
+	if (IS_ERR(fsib_clk))
+		return -EIO;
+
+	ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
 	clk_put(fsib_clk);
+	if (ret < 0)
+		return ret;
+
+	/* FSI DIV setting */
+	ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
+	if (ret < 0) {
+		/* disable FSI B */
+		if (enable)
+			__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
+		return ret;
+	}
+
+	return ackmd_bpfmd;
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+{
+	int ret;
+
+	if (is_porta)
+		ret = fsi_ak4642_set_rate(dev, rate, enable);
+	else
+		ret = fsi_hdmi_set_rate(dev, rate, enable);
 
 	return ret;
 }
@@ -880,6 +969,11 @@
 		goto out;
 	}
 
+	ret = clk_enable(&sh7372_pllc2_clk);
+	if (ret < 0) {
+		pr_err("Cannot enable pllc2 clock\n");
+		goto out;
+	}
 	pr_debug("PLLC2 set frequency %lu\n", rate);
 
 	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
@@ -896,23 +990,11 @@
 
 device_initcall(hdmi_init_pm_clock);
 
-#define FSIACK_DUMMY_RATE 48000
 static int __init fsi_init_pm_clock(void)
 {
 	struct clk *fsia_ick;
 	int ret;
 
-	/*
-	 * FSIACK is connected to AK4642,
-	 * and the rate is depend on playing sound rate.
-	 * So, set dummy rate (= 48k) here
-	 */
-	ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
-	if (ret < 0) {
-		pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
-		return ret;
-	}
-
 	fsia_ick = clk_get(&fsi_device.dev, "icka");
 	if (IS_ERR(fsia_ick)) {
 		ret = PTR_ERR(fsia_ick);
@@ -921,16 +1003,9 @@
 	}
 
 	ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
-	if (ret < 0) {
-		pr_err("Cannot set FSI-A parent: %d\n", ret);
-		goto out;
-	}
-
-	ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
 	if (ret < 0)
-		pr_err("Cannot set FSI-A rate: %d\n", ret);
+		pr_err("Cannot set FSI-A parent: %d\n", ret);
 
-out:
 	clk_put(fsia_ick);
 
 	return ret;
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 7db31e6..3aa0260 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -220,8 +220,7 @@
 	__raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR);
 }
 
-static int pllc2_set_rate(struct clk *clk,
-			  unsigned long rate, int algo_id)
+static int pllc2_set_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long value;
 	int idx;
@@ -230,21 +229,13 @@
 	if (idx < 0)
 		return idx;
 
-	if (rate == clk->parent->rate) {
-		pllc2_disable(clk);
-		return 0;
-	}
+	if (rate == clk->parent->rate)
+		return -EINVAL;
 
 	value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
 
-	if (value & 0x80000000)
-		pllc2_disable(clk);
-
 	__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
 
-	if (value & 0x80000000)
-		return pllc2_enable(clk);
-
 	return 0;
 }
 
@@ -453,32 +444,24 @@
 	unsigned long value;
 
 	value  = __raw_readl(clk->mapping->base) >> 16;
-	if (value < 2) {
-		fsidiv_disable(clk);
-		return -ENOENT;
-	}
+	if (value < 2)
+		return -EIO;
 
 	__raw_writel((value << 16) | 0x3, clk->mapping->base);
 
 	return 0;
 }
 
-static int fsidiv_set_rate(struct clk *clk,
-			   unsigned long rate, int algo_id)
+static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
 {
 	int idx;
 
-	if (clk->parent->rate == rate) {
-		fsidiv_disable(clk);
-		return 0;
-	}
-
 	idx = (clk->parent->rate / rate) & 0xffff;
 	if (idx < 2)
-		return -ENOENT;
+		return -EINVAL;
 
 	__raw_writel(idx << 16, clk->mapping->base);
-	return fsidiv_enable(clk);
+	return 0;
 }
 
 static struct clk_ops fsidiv_clk_ops = {
@@ -609,8 +592,6 @@
 	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
 	CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
 	CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
-	CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
-	CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
 	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
 	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
 	CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
@@ -647,8 +628,8 @@
 	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
-	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
-	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 73fb1a5..608a137 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -75,14 +75,14 @@
 static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
 {
 	/* wait for the operation to complete */
-	while (readl(reg) & mask)
+	while (readl_relaxed(reg) & mask)
 		;
 }
 
 static inline void ux500_cache_sync(void)
 {
 	void __iomem *base = __io_address(UX500_L2CC_BASE);
-	writel(0, base + L2X0_CACHE_SYNC);
+	writel_relaxed(0, base + L2X0_CACHE_SYNC);
 	ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -107,7 +107,7 @@
 	uint32_t l2x0_way_mask = (1<<16) - 1;	/* Bitmask of active ways */
 
 	/* invalidate all ways */
-	writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
 	ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
 	ux500_cache_sync();
 }
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
index ebd8a25..7d8e069 100644
--- a/arch/arm/mach-versatile/include/mach/vmalloc.h
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -18,4 +18,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END		0xd8000000
+#define VMALLOC_END		0xd8000000UL
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 17e7b0b..55c17a6 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -206,8 +206,8 @@
 	 */
 	if (pfn_valid(pfn)) {
 		printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory.  This leads\n"
-		       KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
-		       KERN_WARNING "will fail in the next kernel release.  Please fix your driver.\n");
+		       "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
+		       "will fail in the next kernel release.  Please fix your driver.\n");
 		WARN_ON(1);
 	}
 
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
index 02d9890..3a705c7 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -12,15 +12,7 @@
 
 #include <mach/hardware.h>
 #include <mach/devices-common.h>
-#ifdef SDMA_IS_MERGED
 #include <mach/sdma.h>
-#else
-struct sdma_platform_data {
-	int sdma_version;
-	char *cpu_name;
-	int to_version;
-};
-#endif
 
 struct imx_imx_sdma_data {
 	resource_size_t iobase;
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
index e48340e..17f724c 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -27,6 +27,7 @@
 	imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
 	imx21_cspi_data_entry(0, 1),
 	imx21_cspi_data_entry(1, 2),
+};
 #endif
 
 #ifdef CONFIG_ARCH_MX25
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index aedf9c1..63cdc60 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2008 STMicroelectronics
  * Copyright (C) 2010 Alessandro Rubini
+ * Copyright (C) 2010 Linus Walleij for ST-Ericsson
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2, as
@@ -16,11 +17,13 @@
 #include <linux/clk.h>
 #include <linux/jiffies.h>
 #include <linux/err.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/timer.h>
 #include <asm/mach/time.h>
 
 #include <plat/mtu.h>
 
-void __iomem *mtu_base; /* ssigned by machine code */
+void __iomem *mtu_base; /* Assigned by machine code */
 
 /*
  * Kernel assumes that sched_clock can be called early
@@ -48,16 +51,82 @@
 /*
  * Override the global weak sched_clock symbol with this
  * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by OMAP implementation.)
+ * better resolution when scheduling the kernel.
+ *
+ * Because the hardware timer period may be quite short
+ * (32.3 secs on the 133 MHz MTU timer selection on ux500)
+ * and because cnt32_to_63() needs to be called at least once per
+ * half period to work properly, a kernel keepwarm() timer is set up
+ * to ensure this requirement is always met.
+ *
+ * Also the sched_clock timer will wrap around at some point,
+ * here we set it to run continously for a year.
  */
+#define SCHED_CLOCK_MIN_WRAP 3600*24*365
+static struct timer_list cnt32_to_63_keepwarm_timer;
+static u32 sched_mult;
+static u32 sched_shift;
+
 unsigned long long notrace sched_clock(void)
 {
-	return clocksource_cyc2ns(nmdk_clksrc.read(
-				  &nmdk_clksrc),
-				  nmdk_clksrc.mult,
-				  nmdk_clksrc.shift);
+	u64 cycles;
+
+	if (unlikely(!mtu_base))
+		return 0;
+
+	cycles = cnt32_to_63(-readl(mtu_base + MTU_VAL(0)));
+	/*
+	 * sched_mult is guaranteed to be even so will
+	 * shift out bit 63
+	 */
+	return (cycles * sched_mult) >> sched_shift;
+}
+
+/* Just kick sched_clock every so often */
+static void cnt32_to_63_keepwarm(unsigned long data)
+{
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+	(void) sched_clock();
+}
+
+/*
+ * Set up a timer to keep sched_clock():s 32_to_63 algorithm warm
+ * once in half a 32bit timer wrap interval.
+ */
+static void __init nmdk_sched_clock_init(unsigned long rate)
+{
+	u32 v;
+	unsigned long delta;
+	u64 days;
+
+	/* Find the apropriate mult and shift factors */
+	clocks_calc_mult_shift(&sched_mult, &sched_shift,
+			       rate, NSEC_PER_SEC, SCHED_CLOCK_MIN_WRAP);
+	/* We need to multiply by an even number to get rid of bit 63 */
+	if (sched_mult & 1)
+		sched_mult++;
+
+	/* Let's see what we get, take max counter and scale it */
+	days = (0xFFFFFFFFFFFFFFFFLLU * sched_mult) >> sched_shift;
+	do_div(days, NSEC_PER_SEC);
+	do_div(days, (3600*24));
+
+	pr_info("sched_clock: using %d bits @ %lu Hz wrap in %lu days\n",
+		(64 - sched_shift), rate, (unsigned long) days);
+
+	/*
+	 * Program a timer to kick us at half 32bit wraparound
+	 * Formula: seconds per wrap = (2^32) / f
+	 */
+	v = 0xFFFFFFFFUL / rate;
+	/* We want half of the wrap time to keep cnt32_to_63 warm */
+	v /= 2;
+	pr_debug("sched_clock: prescaled timer rate: %lu Hz, "
+		 "initialize keepwarm timer every %d seconds\n", rate, v);
+	/* Convert seconds to jiffies */
+	delta = msecs_to_jiffies(v*1000);
+	setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, delta);
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + delta));
 }
 
 /* Clockevent device: use one-shot mode */
@@ -161,13 +230,15 @@
 	writel(0, mtu_base + MTU_BGLR(0));
 	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 
-	/* Now the scheduling clock is ready */
+	/* Now the clock source is ready */
 	nmdk_clksrc.read = nmdk_read_timer;
 
 	if (clocksource_register(&nmdk_clksrc))
 		pr_err("timer: failed to initialize clock source %s\n",
 		       nmdk_clksrc.name);
 
+	nmdk_sched_clock_init(rate);
+
 	/* Timer 1 is used for events */
 
 	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h
index e49c5b6..1ab332e 100644
--- a/arch/arm/plat-pxa/include/plat/sdhci.h
+++ b/arch/arm/plat-pxa/include/plat/sdhci.h
@@ -17,6 +17,9 @@
 /* Require clock free running */
 #define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0)
 
+/* Board design supports 8-bit data on SD/SDIO BUS */
+#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
+
 /*
  * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
  * @max_speed: the maximum speed supported
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9793544..704175b 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -29,8 +29,8 @@
 	} else {
 		s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
 		s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
index db9e9e4..72457af 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -31,8 +31,8 @@
 	} else {
 		s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
 		s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index 8ea663a..c3972b6 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -29,8 +29,8 @@
 	} else {
 		s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
 		s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
 	}
 }
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index ac15139..1995c17 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -95,7 +95,6 @@
 static int notrace s390_revalidate_registers(struct mci *mci)
 {
 	int kill_task;
-	u64 tmpclock;
 	u64 zero;
 	void *fpt_save_area, *fpt_creg_save_area;
 
@@ -214,11 +213,10 @@
 			: "0", "cc");
 #endif
 	/* Revalidate clock comparator register */
-	asm volatile(
-		"	stck	0(%1)\n"
-		"	sckc	0(%1)"
-		: "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory");
-
+	if (S390_lowcore.clock_comparator == -1)
+		set_clock_comparator(S390_lowcore.mcck_clock);
+	else
+		set_clock_comparator(S390_lowcore.clock_comparator);
 	/* Check if old PSW is valid */
 	if (!mci->wp)
 		/*
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 752b362..7c37ec3 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -29,17 +29,21 @@
 {
 	unsigned long mask, cr0, cr0_saved;
 	u64 clock_saved;
+	u64 end;
 
+	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+	end = get_clock() + (usecs << 12);
 	clock_saved = local_tick_disable();
-	set_clock_comparator(get_clock() + (usecs << 12));
 	__ctl_store(cr0_saved, 0, 0);
 	cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
 	__ctl_load(cr0 , 0, 0);
-	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
 	lockdep_off();
-	trace_hardirqs_on();
-	__load_psw_mask(mask);
-	local_irq_disable();
+	do {
+		set_clock_comparator(end);
+		trace_hardirqs_on();
+		__load_psw_mask(mask);
+		local_irq_disable();
+	} while (get_clock() < end);
 	lockdep_on();
 	__ctl_load(cr0_saved, 0, 0);
 	local_tick_enable(clock_saved);
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index 46d5179..e3c73cd 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -199,10 +199,13 @@
 #define ARCH_HAS_PREFETCHW
 static inline void prefetch(void *x)
 {
-	__asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory");
+	__builtin_prefetch(x, 0, 3);
 }
 
-#define prefetchw(x)	prefetch(x)
+static inline void prefetchw(void *x)
+{
+	__builtin_prefetch(x, 1, 3);
+}
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index 4eabc68c..b601fa3 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -110,7 +110,7 @@
 	return 0;
 }
 
-static int shoc_clk_set_rate(struct clk *clk, unsigned long rate, int algo_id)
+static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long frqcr3;
 	unsigned int tmp;
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 81f5837..8c6a350 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -88,7 +88,7 @@
 	}
 
 	if (op & CACHEFLUSH_I)
-		flush_cache_all();
+		flush_icache_range(addr, addr+len);
 
 	up_read(&current->mm->mmap_sem);
 	return 0;
diff --git a/arch/sh/kernel/vsyscall/vsyscall-trapa.S b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
index 3b6eb34..3e70f85 100644
--- a/arch/sh/kernel/vsyscall/vsyscall-trapa.S
+++ b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
@@ -8,9 +8,9 @@
 	 * fill out .eh_frame -- PFM. */
 .LEND_vsyscall:
 	.size __kernel_vsyscall,.-.LSTART_vsyscall
-	.previous
 
 	.section .eh_frame,"a",@progbits
+	.previous
 .LCIE:
 	.ualong	.LCIE_end - .LCIE_start
 .LCIE_start:
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 07ec8a8..e11b5fc 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -329,6 +329,18 @@
 
 menu "Bus options"
 
+config PCI
+	bool "PCI support"
+	default y
+	select PCI_DOMAINS
+	---help---
+	  Enable PCI root complex support, so PCIe endpoint devices can
+	  be attached to the Tile chip.  Many, but not all, PCI devices
+	  are supported under Tilera's root complex driver.
+
+config PCI_DOMAINS
+	bool
+
 config NO_IOMEM
 	def_bool !PCI
 
diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h
index c5741da4..14a3f85 100644
--- a/arch/tile/include/asm/cacheflush.h
+++ b/arch/tile/include/asm/cacheflush.h
@@ -137,4 +137,56 @@
 	mb_incoherent();
 }
 
+/*
+ * Flush & invalidate a VA range that is homed remotely on a single core,
+ * waiting until the memory controller holds the flushed values.
+ */
+static inline void finv_buffer_remote(void *buffer, size_t size)
+{
+	char *p;
+	int i;
+
+	/*
+	 * Flush and invalidate the buffer out of the local L1/L2
+	 * and request the home cache to flush and invalidate as well.
+	 */
+	__finv_buffer(buffer, size);
+
+	/*
+	 * Wait for the home cache to acknowledge that it has processed
+	 * all the flush-and-invalidate requests.  This does not mean
+	 * that the flushed data has reached the memory controller yet,
+	 * but it does mean the home cache is processing the flushes.
+	 */
+	__insn_mf();
+
+	/*
+	 * Issue a load to the last cache line, which can't complete
+	 * until all the previously-issued flushes to the same memory
+	 * controller have also completed.  If we weren't striping
+	 * memory, that one load would be sufficient, but since we may
+	 * be, we also need to back up to the last load issued to
+	 * another memory controller, which would be the point where
+	 * we crossed an 8KB boundary (the granularity of striping
+	 * across memory controllers).  Keep backing up and doing this
+	 * until we are before the beginning of the buffer, or have
+	 * hit all the controllers.
+	 */
+	for (i = 0, p = (char *)buffer + size - 1;
+	     i < (1 << CHIP_LOG_NUM_MSHIMS()) && p >= (char *)buffer;
+	     ++i) {
+		const unsigned long STRIPE_WIDTH = 8192;
+
+		/* Force a load instruction to issue. */
+		*(volatile char *)p;
+
+		/* Jump to end of previous stripe. */
+		p -= STRIPE_WIDTH;
+		p = (char *)((unsigned long)p | (STRIPE_WIDTH - 1));
+	}
+
+	/* Wait for the loads (and thus flushes) to have completed. */
+	__insn_mf();
+}
+
 #endif /* _ASM_TILE_CACHEFLUSH_H */
diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h
index ee43328..d3cbb9b 100644
--- a/arch/tile/include/asm/io.h
+++ b/arch/tile/include/asm/io.h
@@ -55,9 +55,6 @@
 #define ioremap_writethrough(physaddr, size)	ioremap(physaddr, size)
 #define ioremap_fullcache(physaddr, size)	ioremap(physaddr, size)
 
-void __iomem *ioport_map(unsigned long port, unsigned int len);
-extern inline void ioport_unmap(void __iomem *addr) {}
-
 #define mmiowb()
 
 /* Conversion between virtual and physical mappings.  */
@@ -189,12 +186,22 @@
  * we never run, uses them unconditionally.
  */
 
-static inline int ioport_panic(void)
+static inline long ioport_panic(void)
 {
 	panic("inb/outb and friends do not exist on tile");
 	return 0;
 }
 
+static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
+{
+	return (void __iomem *) ioport_panic();
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+	ioport_panic();
+}
+
 static inline u8 inb(unsigned long addr)
 {
 	return ioport_panic();
diff --git a/arch/tile/include/asm/pci-bridge.h b/arch/tile/include/asm/pci-bridge.h
deleted file mode 100644
index e853b0e..0000000
--- a/arch/tile/include/asm/pci-bridge.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- */
-
-#ifndef _ASM_TILE_PCI_BRIDGE_H
-#define _ASM_TILE_PCI_BRIDGE_H
-
-#include <linux/ioport.h>
-#include <linux/pci.h>
-
-struct device_node;
-struct pci_controller;
-
-/*
- * pci_io_base returns the memory address at which you can access
- * the I/O space for PCI bus number `bus' (or NULL on error).
- */
-extern void __iomem *pci_bus_io_base(unsigned int bus);
-extern unsigned long pci_bus_io_base_phys(unsigned int bus);
-extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
-
-/* Allocate a new PCI host bridge structure */
-extern struct pci_controller *pcibios_alloc_controller(void);
-
-/* Helper function for setting up resources */
-extern void pci_init_resource(struct resource *res, unsigned long start,
-			      unsigned long end, int flags, char *name);
-
-/* Get the PCI host controller for a bus */
-extern struct pci_controller *pci_bus_to_hose(int bus);
-
-/*
- * Structure of a PCI controller (host bridge)
- */
-struct pci_controller {
-	int index;		/* PCI domain number */
-	struct pci_bus *root_bus;
-
-	int first_busno;
-	int last_busno;
-
-	int hv_cfg_fd[2];	/* config{0,1} fds for this PCIe controller */
-	int hv_mem_fd;		/* fd to Hypervisor for MMIO operations */
-
-	struct pci_ops *ops;
-
-	int irq_base;		/* Base IRQ from the Hypervisor	*/
-	int plx_gen1;		/* flag for PLX Gen 1 configuration */
-
-	/* Address ranges that are routed to this controller/bridge. */
-	struct resource mem_resources[3];
-};
-
-static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
-{
-	return bus->sysdata;
-}
-
-extern void setup_indirect_pci_nomap(struct pci_controller *hose,
-			       void __iomem *cfg_addr, void __iomem *cfg_data);
-extern void setup_indirect_pci(struct pci_controller *hose,
-			       u32 cfg_addr, u32 cfg_data);
-extern void setup_grackle(struct pci_controller *hose);
-
-extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
-
-/*
- *   The following code swizzles for exactly one bridge.  The routine
- *   common_swizzle below handles multiple bridges.  But there are a
- *   some boards that don't follow the PCI spec's suggestion so we
- *   break this piece out separately.
- */
-static inline unsigned char bridge_swizzle(unsigned char pin,
-		unsigned char idsel)
-{
-	return (((pin-1) + idsel) % 4) + 1;
-}
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those PPC systems that do not already have PCI
- * interrupts properly routed.
- */
-/* FIXME - double check this */
-#define PCI_IRQ_TABLE_LOOKUP ({ \
-	long _ctl_ = -1; \
-	if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
-		_ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
-	_ctl_; \
-})
-
-/*
- * Scan the buses below a given PCI host bridge and assign suitable
- * resources to all devices found.
- */
-extern int pciauto_bus_scan(struct pci_controller *, int);
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#else
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	return (unsigned long)-1;
-}
-#endif
-
-#endif /* _ASM_TILE_PCI_BRIDGE_H */
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
index b0c15da..c3fc458 100644
--- a/arch/tile/include/asm/pci.h
+++ b/arch/tile/include/asm/pci.h
@@ -15,7 +15,29 @@
 #ifndef _ASM_TILE_PCI_H
 #define _ASM_TILE_PCI_H
 
-#include <asm/pci-bridge.h>
+#include <linux/pci.h>
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	int index;		/* PCI domain number */
+	struct pci_bus *root_bus;
+
+	int first_busno;
+	int last_busno;
+
+	int hv_cfg_fd[2];	/* config{0,1} fds for this PCIe controller */
+	int hv_mem_fd;		/* fd to Hypervisor for MMIO operations */
+
+	struct pci_ops *ops;
+
+	int irq_base;		/* Base IRQ from the Hypervisor	*/
+	int plx_gen1;		/* flag for PLX Gen 1 configuration */
+
+	/* Address ranges that are routed to this controller/bridge. */
+	struct resource mem_resources[3];
+};
 
 /*
  * The hypervisor maps the entirety of CPA-space as bus addresses, so
@@ -24,57 +46,13 @@
  */
 #define PCI_DMA_BUS_IS_PHYS     1
 
-struct pci_controller *pci_bus_to_hose(int bus);
-unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp);
 int __init tile_pci_init(void);
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
+
 void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
+
 void __devinit pcibios_fixup_bus(struct pci_bus *bus);
 
-int __devinit _tile_cfg_read(struct pci_controller *hose,
-				    int bus,
-				    int slot,
-				    int function,
-				    int offset,
-				    int size,
-				    u32 *val);
-int __devinit _tile_cfg_write(struct pci_controller *hose,
-				     int bus,
-				     int slot,
-				     int function,
-				     int offset,
-				     int size,
-				     u32 val);
-
-/*
- * These are used to to config reads and writes in the early stages of
- * setup before the driver infrastructure has been set up enough to be
- * able to do config reads and writes.
- */
-#define early_cfg_read(where, size, value) \
-	_tile_cfg_read(controller, \
-		       current_bus, \
-		       pci_slot, \
-		       pci_fn, \
-		       where, \
-		       size, \
-		       value)
-
-#define early_cfg_write(where, size, value) \
-	_tile_cfg_write(controller, \
-		       current_bus, \
-		       pci_slot, \
-		       pci_fn, \
-		       where, \
-		       size, \
-		       value)
-
-
-
-#define PCICFG_BYTE	1
-#define PCICFG_WORD	2
-#define PCICFG_DWORD	4
-
 #define	TILE_NUM_PCIE	2
 
 #define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index)
@@ -88,33 +66,33 @@
 }
 
 /*
- * I/O space is currently not supported.
+ * pcibios_assign_all_busses() tells whether or not the bus numbers
+ * should be reassigned, in case the BIOS didn't do it correctly, or
+ * in case we don't have a BIOS and we want to let Linux do it.
  */
+static inline int pcibios_assign_all_busses(void)
+{
+	return 1;
+}
 
-#define TILE_PCIE_LOWER_IO		0x0
-#define TILE_PCIE_UPPER_IO		0x10000
-#define TILE_PCIE_PCIE_IO_SIZE		0x0000FFFF
-
-#define _PAGE_NO_CACHE		0
-#define _PAGE_GUARDED		0
-
-
-#define pcibios_assign_all_busses()    pci_assign_all_buses
-extern int pci_assign_all_buses;
-
+/*
+ * No special bus mastering setup handling.
+ */
 static inline void pcibios_set_master(struct pci_dev *dev)
 {
-	/* No special bus mastering setup handling */
 }
 
 #define PCIBIOS_MIN_MEM		0
-#define PCIBIOS_MIN_IO		TILE_PCIE_LOWER_IO
+#define PCIBIOS_MIN_IO		0
 
 /*
  * This flag tells if the platform is TILEmpower that needs
  * special configuration for the PLX switch chip.
  */
-extern int blade_pci;
+extern int tile_plx_gen1;
+
+/* Use any cpu for PCI. */
+#define cpumask_of_pcibus(bus) cpu_online_mask
 
 /* implement the pci_ DMA API in terms of the generic device dma_ one */
 #include <asm-generic/pci-dma-compat.h>
@@ -122,7 +100,4 @@
 /* generic pci stuff */
 #include <asm-generic/pci.h>
 
-/* Use any cpu for PCI. */
-#define cpumask_of_pcibus(bus) cpu_online_mask
-
 #endif /* _ASM_TILE_PCI_H */
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
index 1747ff3..a9e7c87 100644
--- a/arch/tile/include/asm/processor.h
+++ b/arch/tile/include/asm/processor.h
@@ -292,8 +292,18 @@
 /* Are we using huge pages in the TLB for kernel data? */
 extern int kdata_huge;
 
+/* Support standard Linux prefetching. */
+#define ARCH_HAS_PREFETCH
+#define prefetch(x) __builtin_prefetch(x)
 #define PREFETCH_STRIDE CHIP_L2_LINE_SIZE()
 
+/* Bring a value into the L1D, faulting the TLB if necessary. */
+#ifdef __tilegx__
+#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x))
+#else
+#define prefetch_L1(x) __insn_prefetch_L1((void *)(x))
+#endif
+
 #else /* __ASSEMBLY__ */
 
 /* Do some slow action (e.g. read a slow SPR). */
diff --git a/arch/tile/include/hv/drv_xgbe_impl.h b/arch/tile/include/hv/drv_xgbe_impl.h
new file mode 100644
index 0000000..3a73b2b
--- /dev/null
+++ b/arch/tile/include/hv/drv_xgbe_impl.h
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file drivers/xgbe/impl.h
+ * Implementation details for the NetIO library.
+ */
+
+#ifndef __DRV_XGBE_IMPL_H__
+#define __DRV_XGBE_IMPL_H__
+
+#include <hv/netio_errors.h>
+#include <hv/netio_intf.h>
+#include <hv/drv_xgbe_intf.h>
+
+
+/** How many groups we have (log2). */
+#define LOG2_NUM_GROUPS (12)
+/** How many groups we have. */
+#define NUM_GROUPS (1 << LOG2_NUM_GROUPS)
+
+/** Number of output requests we'll buffer per tile. */
+#define EPP_REQS_PER_TILE (32)
+
+/** Words used in an eDMA command without checksum acceleration. */
+#define EDMA_WDS_NO_CSUM      8
+/** Words used in an eDMA command with checksum acceleration. */
+#define EDMA_WDS_CSUM        10
+/** Total available words in the eDMA command FIFO. */
+#define EDMA_WDS_TOTAL      128
+
+
+/*
+ * FIXME: These definitions are internal and should have underscores!
+ * NOTE: The actual numeric values here are intentional and allow us to
+ * optimize the concept "if small ... else if large ... else ...", by
+ * checking for the low bit being set, and then for non-zero.
+ * These are used as array indices, so they must have the values (0, 1, 2)
+ * in some order.
+ */
+#define SIZE_SMALL (1)       /**< Small packet queue. */
+#define SIZE_LARGE (2)       /**< Large packet queue. */
+#define SIZE_JUMBO (0)       /**< Jumbo packet queue. */
+
+/** The number of "SIZE_xxx" values. */
+#define NETIO_NUM_SIZES 3
+
+
+/*
+ * Default numbers of packets for IPP drivers.  These values are chosen
+ * such that CIPP1 will not overflow its L2 cache.
+ */
+
+/** The default number of small packets. */
+#define NETIO_DEFAULT_SMALL_PACKETS 2750
+/** The default number of large packets. */
+#define NETIO_DEFAULT_LARGE_PACKETS 2500
+/** The default number of jumbo packets. */
+#define NETIO_DEFAULT_JUMBO_PACKETS 250
+
+
+/** Log2 of the size of a memory arena. */
+#define NETIO_ARENA_SHIFT      24      /* 16 MB */
+/** Size of a memory arena. */
+#define NETIO_ARENA_SIZE       (1 << NETIO_ARENA_SHIFT)
+
+
+/** A queue of packets.
+ *
+ * This structure partially defines a queue of packets waiting to be
+ * processed.  The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler.  The other part of the queue state, the read offset, is
+ * kept in user space, not in hypervisor space, so it is in a separate data
+ * structure.
+ *
+ * The read offset (__packet_receive_read in the user part of the queue
+ * structure) points to the next packet to be read. When the read offset is
+ * equal to the write offset, the queue is empty; therefore the queue must
+ * contain one more slot than the required maximum queue size.
+ *
+ * Here's an example of all 3 state variables and what they mean.  All
+ * pointers move left to right.
+ *
+ * @code
+ *   I   I   V   V   V   V   I   I   I   I
+ *   0   1   2   3   4   5   6   7   8   9  10
+ *           ^       ^       ^               ^
+ *           |               |               |
+ *           |               |               __last_packet_plus_one
+ *           |               __buffer_write
+ *           __packet_receive_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 packets (_last_packet_plus_one
+ * = 10).  The read pointer is at 2, and the write pointer is at 6; thus,
+ * there are valid, unread packets in slots 2, 3, 4, and 5.  The remaining
+ * slots are invalid (do not contain a packet).
+ */
+typedef struct {
+  /** Byte offset of the next notify packet to be written: zero for the first
+   *  packet on the queue, sizeof (netio_pkt_t) for the second packet on the
+   *  queue, etc. */
+  volatile uint32_t __packet_write;
+
+  /** Offset of the packet after the last valid packet (i.e., when any
+   *  pointer is incremented to this value, it wraps back to zero). */
+  uint32_t __last_packet_plus_one;
+}
+__netio_packet_queue_t;
+
+
+/** A queue of buffers.
+ *
+ * This structure partially defines a queue of empty buffers which have been
+ * obtained via requests to the IPP.  (The elements of the queue are packet
+ * handles, which are transformed into a full netio_pkt_t when the buffer is
+ * retrieved.)  The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler.  The other parts of the queue state, the read offset and
+ * requested write offset, are kept in user space, not in hypervisor space, so
+ * they are in a separate data structure.
+ *
+ * The read offset (__buffer_read in the user part of the queue structure)
+ * points to the next buffer to be read. When the read offset is equal to the
+ * write offset, the queue is empty; therefore the queue must contain one more
+ * slot than the required maximum queue size.
+ *
+ * The requested write offset (__buffer_requested_write in the user part of
+ * the queue structure) points to the slot which will hold the next buffer we
+ * request from the IPP, once we get around to sending such a request.  When
+ * the requested write offset is equal to the write offset, no requests for
+ * new buffers are outstanding; when the requested write offset is one greater
+ * than the read offset, no more requests may be sent.
+ *
+ * Note that, unlike the packet_queue, the buffer_queue places incoming
+ * buffers at decreasing addresses.  This makes the check for "is it time to
+ * wrap the buffer pointer" cheaper in the assembly code which receives new
+ * buffers, and means that the value which defines the queue size,
+ * __last_buffer, is different than in the packet queue.  Also, the offset
+ * used in the packet_queue is already scaled by the size of a packet; here we
+ * use unscaled slot indices for the offsets.  (These differences are
+ * historical, and in the future it's possible that the packet_queue will look
+ * more like this queue.)
+ *
+ * @code
+ * Here's an example of all 4 state variables and what they mean.  Remember:
+ * all pointers move right to left.
+ *
+ *   V   V   V   I   I   R   R   V   V   V
+ *   0   1   2   3   4   5   6   7   8   9
+ *           ^       ^       ^           ^
+ *           |       |       |           |
+ *           |       |       |           __last_buffer
+ *           |       |       __buffer_write
+ *           |       __buffer_requested_write
+ *           __buffer_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 buffers (_last_buffer = 9).
+ * The read pointer is at 2, and the write pointer is at 6; thus, there are
+ * valid, unread buffers in slots 2, 1, 0, 9, 8, and 7.  The requested write
+ * pointer is at 4; thus, requests have been made to the IPP for buffers which
+ * will be placed in slots 6 and 5 when they arrive.  Finally, the remaining
+ * slots are invalid (do not contain a buffer).
+ */
+typedef struct
+{
+  /** Ordinal number of the next buffer to be written: 0 for the first slot in
+   *  the queue, 1 for the second slot in the queue, etc. */
+  volatile uint32_t __buffer_write;
+
+  /** Ordinal number of the last buffer (i.e., when any pointer is decremented
+   *  below zero, it is reloaded with this value). */
+  uint32_t __last_buffer;
+}
+__netio_buffer_queue_t;
+
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+typedef struct __netio_queue_impl_t
+{
+  /** The queue of packets waiting to be received. */
+  __netio_packet_queue_t __packet_receive_queue;
+  /** The intr bit mask that IDs this device. */
+  unsigned int __intr_id;
+  /** Offset to queues of empty buffers, one per size. */
+  uint32_t __buffer_queue[NETIO_NUM_SIZES];
+  /** The address of the first EPP tile, or -1 if no EPP. */
+  /* ISSUE: Actually this is always "0" or "~0". */
+  uint32_t __epp_location;
+  /** The queue ID that this queue represents. */
+  unsigned int __queue_id;
+  /** Number of acknowledgements received. */
+  volatile uint32_t __acks_received;
+  /** Last completion number received for packet_sendv. */
+  volatile uint32_t __last_completion_rcv;
+  /** Number of packets allowed to be outstanding. */
+  uint32_t __max_outstanding;
+  /** First VA available for packets. */
+  void* __va_0;
+  /** First VA in second range available for packets. */
+  void* __va_1;
+  /** Padding to align the "__packets" field to the size of a netio_pkt_t. */
+  uint32_t __padding[3];
+  /** The packets themselves. */
+  netio_pkt_t __packets[0];
+}
+netio_queue_impl_t;
+
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+typedef struct __netio_queue_user_impl_t
+{
+  /** The next incoming packet to be read. */
+  uint32_t __packet_receive_read;
+  /** The next empty buffers to be read, one index per size. */
+  uint8_t __buffer_read[NETIO_NUM_SIZES];
+  /** Where the empty buffer we next request from the IPP will go, one index
+   * per size. */
+  uint8_t __buffer_requested_write[NETIO_NUM_SIZES];
+  /** PCIe interface flag. */
+  uint8_t __pcie;
+  /** Number of packets left to be received before we send a credit update. */
+  uint32_t __receive_credit_remaining;
+  /** Value placed in __receive_credit_remaining when it reaches zero. */
+  uint32_t __receive_credit_interval;
+  /** First fast I/O routine index. */
+  uint32_t __fastio_index;
+  /** Number of acknowledgements expected. */
+  uint32_t __acks_outstanding;
+  /** Last completion number requested. */
+  uint32_t __last_completion_req;
+  /** File descriptor for driver. */
+  int __fd;
+}
+netio_queue_user_impl_t;
+
+
+#define NETIO_GROUP_CHUNK_SIZE   64   /**< Max # groups in one IPP request */
+#define NETIO_BUCKET_CHUNK_SIZE  64   /**< Max # buckets in one IPP request */
+
+
+/** Internal structure used to convey packet send information to the
+ * hypervisor.  FIXME: Actually, it's not used for that anymore, but
+ * netio_packet_send() still uses it internally.
+ */
+typedef struct
+{
+  uint16_t flags;              /**< Packet flags (__NETIO_SEND_FLG_xxx) */
+  uint16_t transfer_size;      /**< Size of packet */
+  uint32_t va;                 /**< VA of start of packet */
+  __netio_pkt_handle_t handle; /**< Packet handle */
+  uint32_t csum0;              /**< First checksum word */
+  uint32_t csum1;              /**< Second checksum word */
+}
+__netio_send_cmd_t;
+
+
+/** Flags used in two contexts:
+ *  - As the "flags" member in the __netio_send_cmd_t, above; used only
+ *    for netio_pkt_send_{prepare,commit}.
+ *  - As part of the flags passed to the various send packet fast I/O calls.
+ */
+
+/** Need acknowledgement on this packet.  Note that some code in the
+ *  normal send_pkt fast I/O handler assumes that this is equal to 1. */
+#define __NETIO_SEND_FLG_ACK    0x1
+
+/** Do checksum on this packet.  (Only used with the __netio_send_cmd_t;
+ *  normal packet sends use a special fast I/O index to denote checksumming,
+ *  and multi-segment sends test the checksum descriptor.) */
+#define __NETIO_SEND_FLG_CSUM   0x2
+
+/** Get a completion on this packet.  Only used with multi-segment sends.  */
+#define __NETIO_SEND_FLG_COMPLETION 0x4
+
+/** Position of the number-of-extra-segments value in the flags word.
+    Only used with multi-segment sends. */
+#define __NETIO_SEND_FLG_XSEG_SHIFT 3
+
+/** Width of the number-of-extra-segments value in the flags word. */
+#define __NETIO_SEND_FLG_XSEG_WIDTH 2
+
+#endif /* __DRV_XGBE_IMPL_H__ */
diff --git a/arch/tile/include/hv/drv_xgbe_intf.h b/arch/tile/include/hv/drv_xgbe_intf.h
new file mode 100644
index 0000000..146e47d
--- /dev/null
+++ b/arch/tile/include/hv/drv_xgbe_intf.h
@@ -0,0 +1,615 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file drv_xgbe_intf.h
+ * Interface to the hypervisor XGBE driver.
+ */
+
+#ifndef __DRV_XGBE_INTF_H__
+#define __DRV_XGBE_INTF_H__
+
+/**
+ * An object for forwarding VAs and PAs to the hypervisor.
+ * @ingroup types
+ *
+ * This allows the supervisor to specify a number of areas of memory to
+ * store packet buffers.
+ */
+typedef struct
+{
+  /** The physical address of the memory. */
+  HV_PhysAddr pa;
+  /** Page table entry for the memory.  This is only used to derive the
+   *  memory's caching mode; the PA bits are ignored. */
+  HV_PTE pte;
+  /** The virtual address of the memory. */
+  HV_VirtAddr va;
+  /** Size (in bytes) of the memory area. */
+  int size;
+
+}
+netio_ipp_address_t;
+
+/** The various pread/pwrite offsets into the hypervisor-level driver.
+ * @ingroup types
+ */
+typedef enum
+{
+  /** Inform the Linux driver of the address of the NetIO arena memory.
+   *  This offset is actually only used to convey information from netio
+   *  to the Linux driver; it never makes it from there to the hypervisor.
+   *  Write-only; takes a uint32_t specifying the VA address. */
+  NETIO_FIXED_ADDR               = 0x5000000000000000ULL,
+
+  /** Inform the Linux driver of the size of the NetIO arena memory.
+   *  This offset is actually only used to convey information from netio
+   *  to the Linux driver; it never makes it from there to the hypervisor.
+   *  Write-only; takes a uint32_t specifying the VA size. */
+  NETIO_FIXED_SIZE               = 0x5100000000000000ULL,
+
+  /** Register current tile with IPP.  Write then read: write, takes a
+   *  netio_input_config_t, read returns a pointer to a netio_queue_impl_t. */
+  NETIO_IPP_INPUT_REGISTER_OFF   = 0x6000000000000000ULL,
+
+  /** Unregister current tile from IPP.  Write-only, takes a dummy argument. */
+  NETIO_IPP_INPUT_UNREGISTER_OFF = 0x6100000000000000ULL,
+
+  /** Start packets flowing.  Write-only, takes a dummy argument. */
+  NETIO_IPP_INPUT_INIT_OFF       = 0x6200000000000000ULL,
+
+  /** Stop packets flowing.  Write-only, takes a dummy argument. */
+  NETIO_IPP_INPUT_UNINIT_OFF     = 0x6300000000000000ULL,
+
+  /** Configure group (typically we group on VLAN).  Write-only: takes an
+   *  array of netio_group_t's, low 24 bits of the offset is the base group
+   *  number times the size of a netio_group_t. */
+  NETIO_IPP_INPUT_GROUP_CFG_OFF  = 0x6400000000000000ULL,
+
+  /** Configure bucket.  Write-only: takes an array of netio_bucket_t's, low
+   *  24 bits of the offset is the base bucket number times the size of a
+   *  netio_bucket_t. */
+  NETIO_IPP_INPUT_BUCKET_CFG_OFF = 0x6500000000000000ULL,
+
+  /** Get/set a parameter.  Read or write: read or write data is the parameter
+   *  value, low 32 bits of the offset is a __netio_getset_offset_t. */
+  NETIO_IPP_PARAM_OFF            = 0x6600000000000000ULL,
+
+  /** Get fast I/O index.  Read-only; returns a 4-byte base index value. */
+  NETIO_IPP_GET_FASTIO_OFF       = 0x6700000000000000ULL,
+
+  /** Configure hijack IP address.  Packets with this IPv4 dest address
+   *  go to bucket NETIO_NUM_BUCKETS - 1.  Write-only: takes an IP address
+   *  in some standard form.  FIXME: Define the form! */
+  NETIO_IPP_INPUT_HIJACK_CFG_OFF  = 0x6800000000000000ULL,
+
+  /**
+   * Offsets beyond this point are reserved for the supervisor (although that
+   * enforcement must be done by the supervisor driver itself).
+   */
+  NETIO_IPP_USER_MAX_OFF         = 0x6FFFFFFFFFFFFFFFULL,
+
+  /** Register I/O memory.  Write-only, takes a netio_ipp_address_t. */
+  NETIO_IPP_IOMEM_REGISTER_OFF   = 0x7000000000000000ULL,
+
+  /** Unregister I/O memory.  Write-only, takes a netio_ipp_address_t. */
+  NETIO_IPP_IOMEM_UNREGISTER_OFF = 0x7100000000000000ULL,
+
+  /* Offsets greater than 0x7FFFFFFF can't be used directly from Linux
+   * userspace code due to limitations in the pread/pwrite syscalls. */
+
+  /** Drain LIPP buffers. */
+  NETIO_IPP_DRAIN_OFF              = 0xFA00000000000000ULL,
+
+  /** Supply a netio_ipp_address_t to be used as shared memory for the
+   *  LEPP command queue. */
+  NETIO_EPP_SHM_OFF              = 0xFB00000000000000ULL,
+
+  /* 0xFC... is currently unused. */
+
+  /** Stop IPP/EPP tiles.  Write-only, takes a dummy argument.  */
+  NETIO_IPP_STOP_SHIM_OFF        = 0xFD00000000000000ULL,
+
+  /** Start IPP/EPP tiles.  Write-only, takes a dummy argument.  */
+  NETIO_IPP_START_SHIM_OFF       = 0xFE00000000000000ULL,
+
+  /** Supply packet arena.  Write-only, takes an array of
+    * netio_ipp_address_t values. */
+  NETIO_IPP_ADDRESS_OFF          = 0xFF00000000000000ULL,
+} netio_hv_offset_t;
+
+/** Extract the base offset from an offset */
+#define NETIO_BASE_OFFSET(off)    ((off) & 0xFF00000000000000ULL)
+/** Extract the local offset from an offset */
+#define NETIO_LOCAL_OFFSET(off)   ((off) & 0x00FFFFFFFFFFFFFFULL)
+
+
+/**
+ * Get/set offset.
+ */
+typedef union
+{
+  struct
+  {
+    uint64_t addr:48;        /**< Class-specific address */
+    unsigned int class:8;    /**< Class (e.g., NETIO_PARAM) */
+    unsigned int opcode:8;   /**< High 8 bits of NETIO_IPP_PARAM_OFF */
+  }
+  bits;                      /**< Bitfields */
+  uint64_t word;             /**< Aggregated value to use as the offset */
+}
+__netio_getset_offset_t;
+
+/**
+ * Fast I/O index offsets (must be contiguous).
+ */
+typedef enum
+{
+  NETIO_FASTIO_ALLOCATE         = 0, /**< Get empty packet buffer */
+  NETIO_FASTIO_FREE_BUFFER      = 1, /**< Give buffer back to IPP */
+  NETIO_FASTIO_RETURN_CREDITS   = 2, /**< Give credits to IPP */
+  NETIO_FASTIO_SEND_PKT_NOCK    = 3, /**< Send a packet, no checksum */
+  NETIO_FASTIO_SEND_PKT_CK      = 4, /**< Send a packet, with checksum */
+  NETIO_FASTIO_SEND_PKT_VEC     = 5, /**< Send a vector of packets */
+  NETIO_FASTIO_SENDV_PKT        = 6, /**< Sendv one packet */
+  NETIO_FASTIO_NUM_INDEX        = 7, /**< Total number of fast I/O indices */
+} netio_fastio_index_t;
+
+/** 3-word return type for Fast I/O call. */
+typedef struct
+{
+  int err;            /**< Error code. */
+  uint32_t val0;      /**< Value.  Meaning depends upon the specific call. */
+  uint32_t val1;      /**< Value.  Meaning depends upon the specific call. */
+} netio_fastio_rv3_t;
+
+/** 0-argument fast I/O call */
+int __netio_fastio0(uint32_t fastio_index);
+/** 1-argument fast I/O call */
+int __netio_fastio1(uint32_t fastio_index, uint32_t arg0);
+/** 3-argument fast I/O call, 2-word return value */
+netio_fastio_rv3_t __netio_fastio3_rv3(uint32_t fastio_index, uint32_t arg0,
+                                       uint32_t arg1, uint32_t arg2);
+/** 4-argument fast I/O call */
+int __netio_fastio4(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+                    uint32_t arg2, uint32_t arg3);
+/** 6-argument fast I/O call */
+int __netio_fastio6(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+                    uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5);
+/** 9-argument fast I/O call */
+int __netio_fastio9(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+                    uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5,
+                    uint32_t arg6, uint32_t arg7, uint32_t arg8);
+
+/** Allocate an empty packet.
+ * @param fastio_index Fast I/O index.
+ * @param size Size of the packet to allocate.
+ */
+#define __netio_fastio_allocate(fastio_index, size) \
+  __netio_fastio1((fastio_index) + NETIO_FASTIO_ALLOCATE, size)
+
+/** Free a buffer.
+ * @param fastio_index Fast I/O index.
+ * @param handle Handle for the packet to free.
+ */
+#define __netio_fastio_free_buffer(fastio_index, handle) \
+  __netio_fastio1((fastio_index) + NETIO_FASTIO_FREE_BUFFER, handle)
+
+/** Increment our receive credits.
+ * @param fastio_index Fast I/O index.
+ * @param credits Number of credits to add.
+ */
+#define __netio_fastio_return_credits(fastio_index, credits) \
+  __netio_fastio1((fastio_index) + NETIO_FASTIO_RETURN_CREDITS, credits)
+
+/** Send packet, no checksum.
+ * @param fastio_index Fast I/O index.
+ * @param ackflag Nonzero if we want an ack.
+ * @param size Size of the packet.
+ * @param va Virtual address of start of packet.
+ * @param handle Packet handle.
+ */
+#define __netio_fastio_send_pkt_nock(fastio_index, ackflag, size, va, handle) \
+  __netio_fastio4((fastio_index) + NETIO_FASTIO_SEND_PKT_NOCK, ackflag, \
+                  size, va, handle)
+
+/** Send packet, calculate checksum.
+ * @param fastio_index Fast I/O index.
+ * @param ackflag Nonzero if we want an ack.
+ * @param size Size of the packet.
+ * @param va Virtual address of start of packet.
+ * @param handle Packet handle.
+ * @param csum0 Shim checksum header.
+ * @param csum1 Checksum seed.
+ */
+#define __netio_fastio_send_pkt_ck(fastio_index, ackflag, size, va, handle, \
+                                   csum0, csum1) \
+  __netio_fastio6((fastio_index) + NETIO_FASTIO_SEND_PKT_CK, ackflag, \
+                  size, va, handle, csum0, csum1)
+
+
+/** Format for the "csum0" argument to the __netio_fastio_send routines
+ * and LEPP.  Note that this is currently exactly identical to the
+ * ShimProtocolOffloadHeader.
+ */
+typedef union
+{
+  struct
+  {
+    unsigned int start_byte:7;       /**< The first byte to be checksummed */
+    unsigned int count:14;           /**< Number of bytes to be checksummed. */
+    unsigned int destination_byte:7; /**< The byte to write the checksum to. */
+    unsigned int reserved:4;         /**< Reserved. */
+  } bits;                            /**< Decomposed method of access. */
+  unsigned int word;                 /**< To send out the IDN. */
+} __netio_checksum_header_t;
+
+
+/** Sendv packet with 1 or 2 segments.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus
+ *        1 in next 2 bits; expected checksum in high 16 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; if zero, no checksum.
+ * @param va_F Virtual address of first segment.
+ * @param va_L Virtual address of last segment, if 2 segments.
+ * @param len_F_L Length of first segment in low 16 bits; length of last
+ *        segment, if 2 segments, in high 16 bits.
+ */
+#define __netio_fastio_sendv_pkt_1_2(fastio_index, flags, confno, csum0, \
+                                     va_F, va_L, len_F_L) \
+  __netio_fastio6((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \
+                  csum0, va_F, va_L, len_F_L)
+
+/** Send packet on PCIe interface.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; Hard wired 0, not needed for PCIe.
+ * @param va_F Virtual address of the packet buffer.
+ * @param va_L Virtual address of last segment, if 2 segments. Hard wired 0.
+ * @param len_F_L Length of the packet buffer in low 16 bits.
+ */
+#define __netio_fastio_send_pcie_pkt(fastio_index, flags, confno, csum0, \
+                                     va_F, va_L, len_F_L) \
+  __netio_fastio6((fastio_index) + PCIE_FASTIO_SENDV_PKT, flags, confno, \
+                  csum0, va_F, va_L, len_F_L)
+
+/** Sendv packet with 3 or 4 segments.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus
+ *        1 in next 2 bits; expected checksum in high 16 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; if zero, no checksum.
+ * @param va_F Virtual address of first segment.
+ * @param va_L Virtual address of last segment (third segment if 3 segments,
+ *        fourth segment if 4 segments).
+ * @param len_F_L Length of first segment in low 16 bits; length of last
+ *        segment in high 16 bits.
+ * @param va_M0 Virtual address of "middle 0" segment; this segment is sent
+ *        second when there are three segments, and third if there are four.
+ * @param va_M1 Virtual address of "middle 1" segment; this segment is sent
+ *        second when there are four segments.
+ * @param len_M0_M1 Length of middle 0 segment in low 16 bits; length of middle
+ *        1 segment, if 4 segments, in high 16 bits.
+ */
+#define __netio_fastio_sendv_pkt_3_4(fastio_index, flags, confno, csum0, va_F, \
+                                     va_L, len_F_L, va_M0, va_M1, len_M0_M1) \
+  __netio_fastio9((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \
+                  csum0, va_F, va_L, len_F_L, va_M0, va_M1, len_M0_M1)
+
+/** Send vector of packets.
+ * @param fastio_index Fast I/O index.
+ * @param seqno Number of packets transmitted so far on this interface;
+ *        used to decide which packets should be acknowledged.
+ * @param nentries Number of entries in vector.
+ * @param va Virtual address of start of vector entry array.
+ * @return 3-word netio_fastio_rv3_t structure.  The structure's err member
+ *         is an error code, or zero if no error.  The val0 member is the
+ *         updated value of seqno; it has been incremented by 1 for each
+ *         packet sent.  That increment may be less than nentries if an
+ *         error occured, or if some of the entries in the vector contain
+ *         handles equal to NETIO_PKT_HANDLE_NONE.  The val1 member is the
+ *         updated value of nentries; it has been decremented by 1 for each
+ *         vector entry processed.  Again, that decrement may be less than
+ *         nentries (leaving the returned value positive) if an error
+ *         occurred.
+ */
+#define __netio_fastio_send_pkt_vec(fastio_index, seqno, nentries, va) \
+  __netio_fastio3_rv3((fastio_index) + NETIO_FASTIO_SEND_PKT_VEC, seqno, \
+                      nentries, va)
+
+
+/** An egress DMA command for LEPP. */
+typedef struct
+{
+  /** Is this a TSO transfer?
+   *
+   * NOTE: This field is always 0, to distinguish it from
+   * lepp_tso_cmd_t.  It must come first!
+   */
+  uint8_t tso               : 1;
+
+  /** Unused padding bits. */
+  uint8_t _unused           : 3;
+
+  /** Should this packet be sent directly from caches instead of DRAM,
+   * using hash-for-home to locate the packet data?
+   */
+  uint8_t hash_for_home     : 1;
+
+  /** Should we compute a checksum? */
+  uint8_t compute_checksum  : 1;
+
+  /** Is this the final buffer for this packet?
+   *
+   * A single packet can be split over several input buffers (a "gather"
+   * operation).  This flag indicates that this is the last buffer
+   * in a packet.
+   */
+  uint8_t end_of_packet     : 1;
+
+  /** Should LEPP advance 'comp_busy' when this DMA is fully finished? */
+  uint8_t send_completion   : 1;
+
+  /** High bits of Client Physical Address of the start of the buffer
+   *  to be egressed.
+   *
+   *  NOTE: Only 6 bits are actually needed here, as CPAs are
+   *  currently 38 bits.  So two bits could be scavenged from this.
+   */
+  uint8_t cpa_hi;
+
+  /** The number of bytes to be egressed. */
+  uint16_t length;
+
+  /** Low 32 bits of Client Physical Address of the start of the buffer
+   *  to be egressed.
+   */
+  uint32_t cpa_lo;
+
+  /** Checksum information (only used if 'compute_checksum'). */
+  __netio_checksum_header_t checksum_data;
+
+} lepp_cmd_t;
+
+
+/** A chunk of physical memory for a TSO egress. */
+typedef struct
+{
+  /** The low bits of the CPA. */
+  uint32_t cpa_lo;
+  /** The high bits of the CPA. */
+  uint16_t cpa_hi		: 15;
+  /** Should this packet be sent directly from caches instead of DRAM,
+   *  using hash-for-home to locate the packet data?
+   */
+  uint16_t hash_for_home	: 1;
+  /** The length in bytes. */
+  uint16_t length;
+} lepp_frag_t;
+
+
+/** An LEPP command that handles TSO. */
+typedef struct
+{
+  /** Is this a TSO transfer?
+   *
+   *  NOTE: This field is always 1, to distinguish it from
+   *  lepp_cmd_t.  It must come first!
+   */
+  uint8_t tso             : 1;
+
+  /** Unused padding bits. */
+  uint8_t _unused         : 7;
+
+  /** Size of the header[] array in bytes.  It must be in the range
+   *  [40, 127], which are the smallest header for a TCP packet over
+   *  Ethernet and the maximum possible prepend size supported by
+   *  hardware, respectively.  Note that the array storage must be
+   *  padded out to a multiple of four bytes so that the following
+   *  LEPP command is aligned properly.
+   */
+  uint8_t header_size;
+
+  /** Byte offset of the IP header in header[]. */
+  uint8_t ip_offset;
+
+  /** Byte offset of the TCP header in header[]. */
+  uint8_t tcp_offset;
+
+  /** The number of bytes to use for the payload of each packet,
+   *  except of course the last one, which may not have enough bytes.
+   *  This means that each Ethernet packet except the last will have a
+   *  size of header_size + payload_size.
+   */
+  uint16_t payload_size;
+
+  /** The length of the 'frags' array that follows this struct. */
+  uint16_t num_frags;
+
+  /** The actual frags. */
+  lepp_frag_t frags[0 /* Variable-sized; num_frags entries. */];
+
+  /*
+   * The packet header template logically follows frags[],
+   * but you can't declare that in C.
+   *
+   * uint32_t header[header_size_in_words_rounded_up];
+   */
+
+} lepp_tso_cmd_t;
+
+
+/** An LEPP completion ring entry. */
+typedef void* lepp_comp_t;
+
+
+/** Maximum number of frags for one TSO command.  This is adapted from
+ *  linux's "MAX_SKB_FRAGS", and presumably over-estimates by one, for
+ *  our page size of exactly 65536.  We add one for a "body" fragment.
+ */
+#define LEPP_MAX_FRAGS (65536 / HV_PAGE_SIZE_SMALL + 2 + 1)
+
+/** Total number of bytes needed for an lepp_tso_cmd_t. */
+#define LEPP_TSO_CMD_SIZE(num_frags, header_size) \
+  (sizeof(lepp_tso_cmd_t) + \
+   (num_frags) * sizeof(lepp_frag_t) + \
+   (((header_size) + 3) & -4))
+
+/** The size of the lepp "cmd" queue. */
+#define LEPP_CMD_QUEUE_BYTES \
+ (((CHIP_L2_CACHE_SIZE() - 2 * CHIP_L2_LINE_SIZE()) / \
+  (sizeof(lepp_cmd_t) + sizeof(lepp_comp_t))) * sizeof(lepp_cmd_t))
+
+/** The largest possible command that can go in lepp_queue_t::cmds[]. */
+#define LEPP_MAX_CMD_SIZE LEPP_TSO_CMD_SIZE(LEPP_MAX_FRAGS, 128)
+
+/** The largest possible value of lepp_queue_t::cmd_{head, tail} (inclusive).
+ */
+#define LEPP_CMD_LIMIT \
+  (LEPP_CMD_QUEUE_BYTES - LEPP_MAX_CMD_SIZE)
+
+/** The maximum number of completions in an LEPP queue. */
+#define LEPP_COMP_QUEUE_SIZE \
+  ((LEPP_CMD_LIMIT + sizeof(lepp_cmd_t) - 1) / sizeof(lepp_cmd_t))
+
+/** Increment an index modulo the queue size. */
+#define LEPP_QINC(var) \
+  (var = __insn_mnz(var - (LEPP_COMP_QUEUE_SIZE - 1), var + 1))
+
+/** A queue used to convey egress commands from the client to LEPP. */
+typedef struct
+{
+  /** Index of first completion not yet processed by user code.
+   *  If this is equal to comp_busy, there are no such completions.
+   *
+   *  NOTE: This is only read/written by the user.
+   */
+  unsigned int comp_head;
+
+  /** Index of first completion record not yet completed.
+   *  If this is equal to comp_tail, there are no such completions.
+   *  This index gets advanced (modulo LEPP_QUEUE_SIZE) whenever
+   *  a command with the 'completion' bit set is finished.
+   *
+   *  NOTE: This is only written by LEPP, only read by the user.
+   */
+  volatile unsigned int comp_busy;
+
+  /** Index of the first empty slot in the completion ring.
+   *  Entries from this up to but not including comp_head (in ring order)
+   *  can be filled in with completion data.
+   *
+   *  NOTE: This is only read/written by the user.
+   */
+  unsigned int comp_tail;
+
+  /** Byte index of first command enqueued for LEPP but not yet processed.
+   *
+   *  This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT.
+   *
+   *  NOTE: LEPP advances this counter as soon as it no longer needs
+   *  the cmds[] storage for this entry, but the transfer is not actually
+   *  complete (i.e. the buffer pointed to by the command is no longer
+   *  needed) until comp_busy advances.
+   *
+   *  If this is equal to cmd_tail, the ring is empty.
+   *
+   *  NOTE: This is only written by LEPP, only read by the user.
+   */
+  volatile unsigned int cmd_head;
+
+  /** Byte index of first empty slot in the command ring.  This field can
+   *  be incremented up to but not equal to cmd_head (because that would
+   *  mean the ring is empty).
+   *
+   *  This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT.
+   *
+   *  NOTE: This is read/written by the user, only read by LEPP.
+   */
+  volatile unsigned int cmd_tail;
+
+  /** A ring of variable-sized egress DMA commands.
+   *
+   *  NOTE: Only written by the user, only read by LEPP.
+   */
+  char cmds[LEPP_CMD_QUEUE_BYTES]
+    __attribute__((aligned(CHIP_L2_LINE_SIZE())));
+
+  /** A ring of user completion data.
+   *  NOTE: Only read/written by the user.
+   */
+  lepp_comp_t comps[LEPP_COMP_QUEUE_SIZE]
+    __attribute__((aligned(CHIP_L2_LINE_SIZE())));
+} lepp_queue_t;
+
+
+/** An internal helper function for determining the number of entries
+ *  available in a ring buffer, given that there is one sentinel.
+ */
+static inline unsigned int
+_lepp_num_free_slots(unsigned int head, unsigned int tail)
+{
+  /*
+   * One entry is reserved for use as a sentinel, to distinguish
+   * "empty" from "full".  So we compute
+   * (head - tail - 1) % LEPP_QUEUE_SIZE, but without using a slow % operation.
+   */
+  return (head - tail - 1) + ((head <= tail) ? LEPP_COMP_QUEUE_SIZE : 0);
+}
+
+
+/** Returns how many new comp entries can be enqueued. */
+static inline unsigned int
+lepp_num_free_comp_slots(const lepp_queue_t* q)
+{
+  return _lepp_num_free_slots(q->comp_head, q->comp_tail);
+}
+
+static inline int
+lepp_qsub(int v1, int v2)
+{
+  int delta = v1 - v2;
+  return delta + ((delta >> 31) & LEPP_COMP_QUEUE_SIZE);
+}
+
+
+/** FIXME: Check this from linux, via a new "pwrite()" call. */
+#define LIPP_VERSION 1
+
+
+/** We use exactly two bytes of alignment padding. */
+#define LIPP_PACKET_PADDING 2
+
+/** The minimum size of a "small" buffer (including the padding). */
+#define LIPP_SMALL_PACKET_SIZE 128
+
+/*
+ * NOTE: The following two values should total to less than around
+ * 13582, to keep the total size used for "lipp_state_t" below 64K.
+ */
+
+/** The maximum number of "small" buffers.
+ *  This is enough for 53 network cpus with 128 credits.  Note that
+ *  if these are exhausted, we will fall back to using large buffers.
+ */
+#define LIPP_SMALL_BUFFERS 6785
+
+/** The maximum number of "large" buffers.
+ *  This is enough for 53 network cpus with 128 credits.
+ */
+#define LIPP_LARGE_BUFFERS 6785
+
+#endif /* __DRV_XGBE_INTF_H__ */
diff --git a/arch/tile/include/hv/netio_errors.h b/arch/tile/include/hv/netio_errors.h
new file mode 100644
index 0000000..e1591bf
--- /dev/null
+++ b/arch/tile/include/hv/netio_errors.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * Error codes returned from NetIO routines.
+ */
+
+#ifndef __NETIO_ERRORS_H__
+#define __NETIO_ERRORS_H__
+
+/**
+ * @addtogroup error
+ *
+ * @brief The error codes returned by NetIO functions.
+ *
+ * NetIO functions return 0 (defined as ::NETIO_NO_ERROR) on success, and
+ * a negative value if an error occurs.
+ *
+ * In cases where a NetIO function failed due to a error reported by
+ * system libraries, the error code will be the negation of the
+ * system errno at the time of failure.  The @ref netio_strerror()
+ * function will deliver error strings for both NetIO and system error
+ * codes.
+ *
+ * @{
+ */
+
+/** The set of all NetIO errors. */
+typedef enum
+{
+  /** Operation successfully completed. */
+  NETIO_NO_ERROR        = 0,
+
+  /** A packet was successfully retrieved from an input queue. */
+  NETIO_PKT             = 0,
+
+  /** Largest NetIO error number. */
+  NETIO_ERR_MAX         = -701,
+
+  /** The tile is not registered with the IPP. */
+  NETIO_NOT_REGISTERED  = -701,
+
+  /** No packet was available to retrieve from the input queue. */
+  NETIO_NOPKT           = -702,
+
+  /** The requested function is not implemented. */
+  NETIO_NOT_IMPLEMENTED = -703,
+
+  /** On a registration operation, the target queue already has the maximum
+   *  number of tiles registered for it, and no more may be added.  On a
+   *  packet send operation, the output queue is full and nothing more can
+   *  be queued until some of the queued packets are actually transmitted. */
+  NETIO_QUEUE_FULL      = -704,
+
+  /** The calling process or thread is not bound to exactly one CPU. */
+  NETIO_BAD_AFFINITY    = -705,
+
+  /** Cannot allocate memory on requested controllers. */
+  NETIO_CANNOT_HOME     = -706,
+
+  /** On a registration operation, the IPP specified is not configured
+   *  to support the options requested; for instance, the application
+   *  wants a specific type of tagged headers which the configured IPP
+   *  doesn't support.  Or, the supplied configuration information is
+   *  not self-consistent, or is out of range; for instance, specifying
+   *  both NETIO_RECV and NETIO_NO_RECV, or asking for more than
+   *  NETIO_MAX_SEND_BUFFERS to be preallocated.  On a VLAN or bucket
+   *  configure operation, the number of items, or the base item, was
+   *  out of range.
+   */
+  NETIO_BAD_CONFIG      = -707,
+
+  /** Too many tiles have registered to transmit packets. */
+  NETIO_TOOMANY_XMIT    = -708,
+
+  /** Packet transmission was attempted on a queue which was registered
+      with transmit disabled. */
+  NETIO_UNREG_XMIT      = -709,
+
+  /** This tile is already registered with the IPP. */
+  NETIO_ALREADY_REGISTERED = -710,
+
+  /** The Ethernet link is down. The application should try again later. */
+  NETIO_LINK_DOWN       = -711,
+
+  /** An invalid memory buffer has been specified.  This may be an unmapped
+   * virtual address, or one which does not meet alignment requirements.
+   * For netio_input_register(), this error may be returned when multiple
+   * processes specify different memory regions to be used for NetIO
+   * buffers.  That can happen if these processes specify explicit memory
+   * regions with the ::NETIO_FIXED_BUFFER_VA flag, or if tmc_cmem_init()
+   * has not been called by a common ancestor of the processes.
+   */
+  NETIO_FAULT           = -712,
+
+  /** Cannot combine user-managed shared memory and cache coherence. */
+  NETIO_BAD_CACHE_CONFIG = -713,
+
+  /** Smallest NetIO error number. */
+  NETIO_ERR_MIN         = -713,
+
+#ifndef __DOXYGEN__
+  /** Used internally to mean that no response is needed; never returned to
+   *  an application. */
+  NETIO_NO_RESPONSE     = 1
+#endif
+} netio_error_t;
+
+/** @} */
+
+#endif /* __NETIO_ERRORS_H__ */
diff --git a/arch/tile/include/hv/netio_intf.h b/arch/tile/include/hv/netio_intf.h
new file mode 100644
index 0000000..8d20972
--- /dev/null
+++ b/arch/tile/include/hv/netio_intf.h
@@ -0,0 +1,2975 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * NetIO interface structures and macros.
+ */
+
+#ifndef __NETIO_INTF_H__
+#define __NETIO_INTF_H__
+
+#include <hv/netio_errors.h>
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__)
+#include <assert.h>
+#define netio_assert assert  /**< Enable assertions from macros */
+#else
+#define netio_assert(...) ((void)(0))  /**< Disable assertions from macros */
+#endif
+
+/*
+ * If none of these symbols are defined, we're building libnetio in an
+ * environment where we have pthreads, so we'll enable locking.
+ */
+#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__) && \
+    !defined(__NEWLIB__)
+#define _NETIO_PTHREAD       /**< Include a mutex in netio_queue_t below */
+
+/*
+ * If NETIO_UNLOCKED is defined, we don't do use per-cpu locks on
+ * per-packet NetIO operations.  We still do pthread locking on things
+ * like netio_input_register, though.  This is used for building
+ * libnetio_unlocked.
+ */
+#ifndef NETIO_UNLOCKED
+
+/* Avoid PLT overhead by using our own inlined per-cpu lock. */
+#include <sched.h>
+typedef int _netio_percpu_mutex_t;
+
+static __inline int
+_netio_percpu_mutex_init(_netio_percpu_mutex_t* lock)
+{
+  *lock = 0;
+  return 0;
+}
+
+static __inline int
+_netio_percpu_mutex_lock(_netio_percpu_mutex_t* lock)
+{
+  while (__builtin_expect(__insn_tns(lock), 0))
+    sched_yield();
+  return 0;
+}
+
+static __inline int
+_netio_percpu_mutex_unlock(_netio_percpu_mutex_t* lock)
+{
+  *lock = 0;
+  return 0;
+}
+
+#else /* NETIO_UNLOCKED */
+
+/* Don't do any locking for per-packet NetIO operations. */
+typedef int _netio_percpu_mutex_t;
+#define _netio_percpu_mutex_init(L)
+#define _netio_percpu_mutex_lock(L)
+#define _netio_percpu_mutex_unlock(L)
+
+#endif /* NETIO_UNLOCKED */
+#endif /* !__HV__, !__BOGUX, !__KERNEL__, !__NEWLIB__ */
+
+/** How many tiles can register for a given queue.
+ *  @ingroup setup */
+#define NETIO_MAX_TILES_PER_QUEUE  64
+
+
+/** Largest permissible queue identifier.
+ *  @ingroup setup  */
+#define NETIO_MAX_QUEUE_ID        255
+
+
+#ifndef __DOXYGEN__
+
+/* Metadata packet checksum/ethertype flags. */
+
+/** The L4 checksum has not been calculated. */
+#define _NETIO_PKT_NO_L4_CSUM_SHIFT           0
+#define _NETIO_PKT_NO_L4_CSUM_RMASK           1
+#define _NETIO_PKT_NO_L4_CSUM_MASK \
+         (_NETIO_PKT_NO_L4_CSUM_RMASK << _NETIO_PKT_NO_L4_CSUM_SHIFT)
+
+/** The L3 checksum has not been calculated. */
+#define _NETIO_PKT_NO_L3_CSUM_SHIFT           1
+#define _NETIO_PKT_NO_L3_CSUM_RMASK           1
+#define _NETIO_PKT_NO_L3_CSUM_MASK \
+         (_NETIO_PKT_NO_L3_CSUM_RMASK << _NETIO_PKT_NO_L3_CSUM_SHIFT)
+
+/** The L3 checksum is incorrect (or perhaps has not been calculated). */
+#define _NETIO_PKT_BAD_L3_CSUM_SHIFT          2
+#define _NETIO_PKT_BAD_L3_CSUM_RMASK          1
+#define _NETIO_PKT_BAD_L3_CSUM_MASK \
+         (_NETIO_PKT_BAD_L3_CSUM_RMASK << _NETIO_PKT_BAD_L3_CSUM_SHIFT)
+
+/** The Ethernet packet type is unrecognized. */
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT    3
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_RMASK    1
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_MASK \
+         (_NETIO_PKT_TYPE_UNRECOGNIZED_RMASK << \
+          _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT)
+
+/* Metadata packet type flags. */
+
+/** Where the packet type bits are; this field is the index into
+ *  _netio_pkt_info. */
+#define _NETIO_PKT_TYPE_SHIFT        4
+#define _NETIO_PKT_TYPE_RMASK        0x3F
+
+/** How many VLAN tags the packet has, and, if we have two, which one we
+ *  actually grouped on.  A VLAN within a proprietary (Marvell or Broadcom)
+ *  tag is counted here. */
+#define _NETIO_PKT_VLAN_SHIFT        4
+#define _NETIO_PKT_VLAN_RMASK        0x3
+#define _NETIO_PKT_VLAN_MASK \
+         (_NETIO_PKT_VLAN_RMASK << _NETIO_PKT_VLAN_SHIFT)
+#define _NETIO_PKT_VLAN_NONE         0   /* No VLAN tag. */
+#define _NETIO_PKT_VLAN_ONE          1   /* One VLAN tag. */
+#define _NETIO_PKT_VLAN_TWO_OUTER    2   /* Two VLAN tags, outer one used. */
+#define _NETIO_PKT_VLAN_TWO_INNER    3   /* Two VLAN tags, inner one used. */
+
+/** Which proprietary tags the packet has. */
+#define _NETIO_PKT_TAG_SHIFT         6
+#define _NETIO_PKT_TAG_RMASK         0x3
+#define _NETIO_PKT_TAG_MASK \
+          (_NETIO_PKT_TAG_RMASK << _NETIO_PKT_TAG_SHIFT)
+#define _NETIO_PKT_TAG_NONE          0   /* No proprietary tags. */
+#define _NETIO_PKT_TAG_MRVL          1   /* Marvell HyperG.Stack tags. */
+#define _NETIO_PKT_TAG_MRVL_EXT      2   /* HyperG.Stack extended tags. */
+#define _NETIO_PKT_TAG_BRCM          3   /* Broadcom HiGig tags. */
+
+/** Whether a packet has an LLC + SNAP header. */
+#define _NETIO_PKT_SNAP_SHIFT        8
+#define _NETIO_PKT_SNAP_RMASK        0x1
+#define _NETIO_PKT_SNAP_MASK \
+          (_NETIO_PKT_SNAP_RMASK << _NETIO_PKT_SNAP_SHIFT)
+
+/* NOTE: Bits 9 and 10 are unused. */
+
+/** Length of any custom data before the L2 header, in words. */
+#define _NETIO_PKT_CUSTOM_LEN_SHIFT  11
+#define _NETIO_PKT_CUSTOM_LEN_RMASK  0x1F
+#define _NETIO_PKT_CUSTOM_LEN_MASK \
+          (_NETIO_PKT_CUSTOM_LEN_RMASK << _NETIO_PKT_CUSTOM_LEN_SHIFT)
+
+/** The L4 checksum is incorrect (or perhaps has not been calculated). */
+#define _NETIO_PKT_BAD_L4_CSUM_SHIFT 16
+#define _NETIO_PKT_BAD_L4_CSUM_RMASK 0x1
+#define _NETIO_PKT_BAD_L4_CSUM_MASK \
+          (_NETIO_PKT_BAD_L4_CSUM_RMASK << _NETIO_PKT_BAD_L4_CSUM_SHIFT)
+
+/** Length of the L2 header, in words. */
+#define _NETIO_PKT_L2_LEN_SHIFT  17
+#define _NETIO_PKT_L2_LEN_RMASK  0x1F
+#define _NETIO_PKT_L2_LEN_MASK \
+          (_NETIO_PKT_L2_LEN_RMASK << _NETIO_PKT_L2_LEN_SHIFT)
+
+
+/* Flags in minimal packet metadata. */
+
+/** We need an eDMA checksum on this packet. */
+#define _NETIO_PKT_NEED_EDMA_CSUM_SHIFT            0
+#define _NETIO_PKT_NEED_EDMA_CSUM_RMASK            1
+#define _NETIO_PKT_NEED_EDMA_CSUM_MASK \
+         (_NETIO_PKT_NEED_EDMA_CSUM_RMASK << _NETIO_PKT_NEED_EDMA_CSUM_SHIFT)
+
+/* Data within the packet information table. */
+
+/* Note that, for efficiency, code which uses these fields assumes that none
+ * of the shift values below are zero.  See uses below for an explanation. */
+
+/** Offset within the L2 header of the innermost ethertype (in halfwords). */
+#define _NETIO_PKT_INFO_ETYPE_SHIFT       6
+#define _NETIO_PKT_INFO_ETYPE_RMASK    0x1F
+
+/** Offset within the L2 header of the VLAN tag (in halfwords). */
+#define _NETIO_PKT_INFO_VLAN_SHIFT       11
+#define _NETIO_PKT_INFO_VLAN_RMASK     0x1F
+
+#endif
+
+
+/** The size of a memory buffer representing a small packet.
+ *  @ingroup egress */
+#define SMALL_PACKET_SIZE 256
+
+/** The size of a memory buffer representing a large packet.
+ *  @ingroup egress */
+#define LARGE_PACKET_SIZE 2048
+
+/** The size of a memory buffer representing a jumbo packet.
+ *  @ingroup egress */
+#define JUMBO_PACKET_SIZE (12 * 1024)
+
+
+/* Common ethertypes.
+ * @ingroup ingress */
+/** @{ */
+/** The ethertype of IPv4. */
+#define ETHERTYPE_IPv4 (0x0800)
+/** The ethertype of ARP. */
+#define ETHERTYPE_ARP (0x0806)
+/** The ethertype of VLANs. */
+#define ETHERTYPE_VLAN (0x8100)
+/** The ethertype of a Q-in-Q header. */
+#define ETHERTYPE_Q_IN_Q (0x9100)
+/** The ethertype of IPv6. */
+#define ETHERTYPE_IPv6 (0x86DD)
+/** The ethertype of MPLS. */
+#define ETHERTYPE_MPLS (0x8847)
+/** @} */
+
+
+/** The possible return values of NETIO_PKT_STATUS.
+ * @ingroup ingress
+ */
+typedef enum
+{
+  /** No problems were detected with this packet. */
+  NETIO_PKT_STATUS_OK,
+  /** The packet is undersized; this is expected behavior if the packet's
+    * ethertype is unrecognized, but otherwise the packet is likely corrupt. */
+  NETIO_PKT_STATUS_UNDERSIZE,
+  /** The packet is oversized and some trailing bytes have been discarded.
+      This is expected behavior for short packets, since it's impossible to
+      precisely determine the amount of padding which may have been added to
+      them to make them meet the minimum Ethernet packet size. */
+  NETIO_PKT_STATUS_OVERSIZE,
+  /** The packet was judged to be corrupt by hardware (for instance, it had
+      a bad CRC, or part of it was discarded due to lack of buffer space in
+      the I/O shim) and should be discarded. */
+  NETIO_PKT_STATUS_BAD
+} netio_pkt_status_t;
+
+
+/** Log2 of how many buckets we have. */
+#define NETIO_LOG2_NUM_BUCKETS (10)
+
+/** How many buckets we have.
+ * @ingroup ingress */
+#define NETIO_NUM_BUCKETS (1 << NETIO_LOG2_NUM_BUCKETS)
+
+
+/**
+ * @brief A group-to-bucket identifier.
+ *
+ * @ingroup setup
+ *
+ * This tells us what to do with a given group.
+ */
+typedef union {
+  /** The header broken down into bits. */
+  struct {
+    /** Whether we should balance on L4, if available */
+    unsigned int __balance_on_l4:1;
+    /** Whether we should balance on L3, if available */
+    unsigned int __balance_on_l3:1;
+    /** Whether we should balance on L2, if available */
+    unsigned int __balance_on_l2:1;
+    /** Reserved for future use */
+    unsigned int __reserved:1;
+    /** The base bucket to use to send traffic */
+    unsigned int __bucket_base:NETIO_LOG2_NUM_BUCKETS;
+    /** The mask to apply to the balancing value. This must be one less
+     * than a power of two, e.g. 0x3 or 0xFF.
+     */
+    unsigned int __bucket_mask:NETIO_LOG2_NUM_BUCKETS;
+    /** Pad to 32 bits */
+    unsigned int __padding:(32 - 4 - 2 * NETIO_LOG2_NUM_BUCKETS);
+  } bits;
+  /** To send out the IDN. */
+  unsigned int word;
+}
+netio_group_t;
+
+
+/**
+ * @brief A VLAN-to-bucket identifier.
+ *
+ * @ingroup setup
+ *
+ * This tells us what to do with a given VLAN.
+ */
+typedef netio_group_t netio_vlan_t;
+
+
+/**
+ * A bucket-to-queue mapping.
+ * @ingroup setup
+ */
+typedef unsigned char netio_bucket_t;
+
+
+/**
+ * A packet size can always fit in a netio_size_t.
+ * @ingroup setup
+ */
+typedef unsigned int netio_size_t;
+
+
+/**
+ * @brief Ethernet standard (ingress) packet metadata.
+ *
+ * @ingroup ingress
+ *
+ * This is additional data associated with each packet.
+ * This structure is opaque and accessed through the @ref ingress.
+ *
+ * Also, the buffer population operation currently assumes that standard
+ * metadata is at least as large as minimal metadata, and will need to be
+ * modified if that is no longer the case.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  /** This structure is opaque. */
+  unsigned char opaque[24];
+#else
+  /** The overall ordinal of the packet */
+  unsigned int __packet_ordinal;
+  /** The ordinal of the packet within the group */
+  unsigned int __group_ordinal;
+  /** The best flow hash IPP could compute. */
+  unsigned int __flow_hash;
+  /** Flags pertaining to checksum calculation, packet type, etc. */
+  unsigned int __flags;
+  /** The first word of "user data". */
+  unsigned int __user_data_0;
+  /** The second word of "user data". */
+  unsigned int __user_data_1;
+#endif
+}
+netio_pkt_metadata_t;
+
+
+/** To ensure that the L3 header is aligned mod 4, the L2 header should be
+ * aligned mod 4 plus 2, since every supported L2 header is 4n + 2 bytes
+ * long.  The standard way to do this is to simply add 2 bytes of padding
+ * before the L2 header.
+ */
+#define NETIO_PACKET_PADDING 2
+
+
+
+/**
+ * @brief Ethernet minimal (egress) packet metadata.
+ *
+ * @ingroup egress
+ *
+ * This structure represents information about packets which have
+ * been processed by @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer().  This structure is opaque
+ * and accessed through the @ref egress.
+ *
+ * @internal This structure is actually copied into the memory used by
+ * standard metadata, which is assumed to be large enough.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  /** This structure is opaque. */
+  unsigned char opaque[14];
+#else
+  /** The offset of the L2 header from the start of the packet data. */
+  unsigned short l2_offset;
+  /** The offset of the L3 header from the start of the packet data. */
+  unsigned short l3_offset;
+  /** Where to write the checksum. */
+  unsigned char csum_location;
+  /** Where to start checksumming from. */
+  unsigned char csum_start;
+  /** Flags pertaining to checksum calculation etc. */
+  unsigned short flags;
+  /** The L2 length of the packet. */
+  unsigned short l2_length;
+  /** The checksum with which to seed the checksum generator. */
+  unsigned short csum_seed;
+  /** How much to checksum. */
+  unsigned short csum_length;
+#endif
+}
+netio_pkt_minimal_metadata_t;
+
+
+#ifndef __DOXYGEN__
+
+/**
+ * @brief An I/O notification header.
+ *
+ * This is the first word of data received from an I/O shim in a notification
+ * packet. It contains framing and status information.
+ */
+typedef union
+{
+  unsigned int word; /**< The whole word. */
+  /** The various fields. */
+  struct
+  {
+    unsigned int __channel:7;    /**< Resource channel. */
+    unsigned int __type:4;       /**< Type. */
+    unsigned int __ack:1;        /**< Whether an acknowledgement is needed. */
+    unsigned int __reserved:1;   /**< Reserved. */
+    unsigned int __protocol:1;   /**< A protocol-specific word is added. */
+    unsigned int __status:2;     /**< Status of the transfer. */
+    unsigned int __framing:2;    /**< Framing of the transfer. */
+    unsigned int __transfer_size:14; /**< Transfer size in bytes (total). */
+  } bits;
+}
+__netio_pkt_notif_t;
+
+
+/**
+ * Returns the base address of the packet.
+ */
+#define _NETIO_PKT_HANDLE_BASE(p) \
+  ((unsigned char*)((p).word & 0xFFFFFFC0))
+
+/**
+ * Returns the base address of the packet.
+ */
+#define _NETIO_PKT_BASE(p) \
+  _NETIO_PKT_HANDLE_BASE(p->__packet)
+
+/**
+ * @brief An I/O notification packet (second word)
+ *
+ * This is the second word of data received from an I/O shim in a notification
+ * packet.  This is the virtual address of the packet buffer, plus some flag
+ * bits.  (The virtual address of the packet is always 256-byte aligned so we
+ * have room for 8 bits' worth of flags in the low 8 bits.)
+ *
+ * @internal
+ * NOTE: The low two bits must contain "__queue", so the "packet size"
+ * (SIZE_SMALL, SIZE_LARGE, or SIZE_JUMBO) can be determined quickly.
+ *
+ * If __addr or __offset are moved, _NETIO_PKT_BASE
+ * (defined right below this) must be changed.
+ */
+typedef union
+{
+  unsigned int word; /**< The whole word. */
+  /** The various fields. */
+  struct
+  {
+    /** Which queue the packet will be returned to once it is sent back to
+        the IPP.  This is one of the SIZE_xxx values. */
+    unsigned int __queue:2;
+
+    /** The IPP handle of the sending IPP. */
+    unsigned int __ipp_handle:2;
+
+    /** Reserved for future use. */
+    unsigned int __reserved:1;
+
+    /** If 1, this packet has minimal (egress) metadata; otherwise, it
+        has standard (ingress) metadata. */
+    unsigned int __minimal:1;
+
+    /** Offset of the metadata within the packet.  This value is multiplied
+     *  by 64 and added to the base packet address to get the metadata
+     *  address.  Note that this field is aligned within the word such that
+     *  you can easily extract the metadata address with a 26-bit mask. */
+    unsigned int __offset:2;
+
+    /** The top 24 bits of the packet's virtual address. */
+    unsigned int __addr:24;
+  } bits;
+}
+__netio_pkt_handle_t;
+
+#endif /* !__DOXYGEN__ */
+
+
+/**
+ * @brief A handle for an I/O packet's storage.
+ * @ingroup ingress
+ *
+ * netio_pkt_handle_t encodes the concept of a ::netio_pkt_t with its
+ * packet metadata removed.  It is a much smaller type that exists to
+ * facilitate applications where the full ::netio_pkt_t type is too
+ * large, such as those that cache enormous numbers of packets or wish
+ * to transmit packet descriptors over the UDN.
+ *
+ * Because there is no metadata, most ::netio_pkt_t operations cannot be
+ * performed on a netio_pkt_handle_t.  It supports only
+ * netio_free_handle() (to free the buffer) and
+ * NETIO_PKT_CUSTOM_DATA_H() (to access a pointer to its contents).
+ * The application must acquire any additional metadata it wants from the
+ * original ::netio_pkt_t and record it separately.
+ *
+ * A netio_pkt_handle_t can be extracted from a ::netio_pkt_t by calling
+ * NETIO_PKT_HANDLE().  An invalid handle (analogous to NULL) can be
+ * created by assigning the value ::NETIO_PKT_HANDLE_NONE. A handle can
+ * be tested for validity with NETIO_PKT_HANDLE_IS_VALID().
+ */
+typedef struct
+{
+  unsigned int word; /**< Opaque bits. */
+} netio_pkt_handle_t;
+
+/**
+ * @brief A packet descriptor.
+ *
+ * @ingroup ingress
+ * @ingroup egress
+ *
+ * This data structure represents a packet.  The structure is manipulated
+ * through the @ref ingress and the @ref egress.
+ *
+ * While the contents of a netio_pkt_t are opaque, the structure itself is
+ * portable.  This means that it may be shared between all tiles which have
+ * done a netio_input_register() call for the interface on which the pkt_t
+ * was initially received (via netio_get_packet()) or retrieved (via
+ * netio_get_buffer()).  The contents of a netio_pkt_t can be transmitted to
+ * another tile via shared memory, or via a UDN message, or by other means.
+ * The destination tile may then use the pkt_t as if it had originally been
+ * received locally; it may read or write the packet's data, read its
+ * metadata, free the packet, send the packet, transfer the netio_pkt_t to
+ * yet another tile, and so forth.
+ *
+ * Once a netio_pkt_t has been transferred to a second tile, the first tile
+ * should not reference the original copy; in particular, if more than one
+ * tile frees or sends the same netio_pkt_t, the IPP's packet free lists will
+ * become corrupted.  Note also that each tile which reads or modifies
+ * packet data must obey the memory coherency rules outlined in @ref input.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  /** This structure is opaque. */
+  unsigned char opaque[32];
+#else
+  /** For an ingress packet (one with standard metadata), this is the
+   *  notification header we got from the I/O shim.  For an egress packet
+   *  (one with minimal metadata), this word is zero if the packet has not
+   *  been populated, and nonzero if it has. */
+  __netio_pkt_notif_t __notif_header;
+
+  /** Virtual address of the packet buffer, plus state flags. */
+  __netio_pkt_handle_t __packet;
+
+  /** Metadata associated with the packet. */
+  netio_pkt_metadata_t __metadata;
+#endif
+}
+netio_pkt_t;
+
+
+#ifndef __DOXYGEN__
+
+#define __NETIO_PKT_NOTIF_HEADER(pkt) ((pkt)->__notif_header)
+#define __NETIO_PKT_IPP_HANDLE(pkt) ((pkt)->__packet.bits.__ipp_handle)
+#define __NETIO_PKT_QUEUE(pkt) ((pkt)->__packet.bits.__queue)
+#define __NETIO_PKT_NOTIF_HEADER_M(mda, pkt) ((pkt)->__notif_header)
+#define __NETIO_PKT_IPP_HANDLE_M(mda, pkt) ((pkt)->__packet.bits.__ipp_handle)
+#define __NETIO_PKT_MINIMAL(pkt) ((pkt)->__packet.bits.__minimal)
+#define __NETIO_PKT_QUEUE_M(mda, pkt) ((pkt)->__packet.bits.__queue)
+#define __NETIO_PKT_FLAGS_M(mda, pkt) ((mda)->__flags)
+
+/* Packet information table, used by the attribute access functions below. */
+extern const uint16_t _netio_pkt_info[];
+
+#endif /* __DOXYGEN__ */
+
+
+#ifndef __DOXYGEN__
+/* These macros are deprecated and will disappear in a future MDE release. */
+#define NETIO_PKT_GOOD_CHECKSUM(pkt) \
+  NETIO_PKT_L4_CSUM_CORRECT(pkt)
+#define NETIO_PKT_GOOD_CHECKSUM_M(mda, pkt) \
+  NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt)
+#endif /* __DOXYGEN__ */
+
+
+/* Packet attribute access functions. */
+
+/** Return a pointer to the metadata for a packet.
+ * @ingroup ingress
+ *
+ * Calling this function once and passing the result to other retrieval
+ * functions with a "_M" suffix usually improves performance.  This
+ * function must be called on an 'ingress' packet (i.e. one retrieved
+ * by @ref netio_get_packet(), on which @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer have not been called). Use of this
+ * function on an 'egress' packet will cause an assertion failure.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's standard metadata.
+ */
+static __inline netio_pkt_metadata_t*
+NETIO_PKT_METADATA(netio_pkt_t* pkt)
+{
+  netio_assert(!pkt->__packet.bits.__minimal);
+  return &pkt->__metadata;
+}
+
+
+/** Return a pointer to the minimal metadata for a packet.
+ * @ingroup egress
+ *
+ * Calling this function once and passing the result to other retrieval
+ * functions with a "_MM" suffix usually improves performance.  This
+ * function must be called on an 'egress' packet (i.e. one on which
+ * @ref netio_populate_buffer() or @ref netio_populate_prepend_buffer()
+ * have been called, or one retrieved by @ref netio_get_buffer()). Use of
+ * this function on an 'ingress' packet will cause an assertion failure.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's standard metadata.
+ */
+static __inline netio_pkt_minimal_metadata_t*
+NETIO_PKT_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+  netio_assert(pkt->__packet.bits.__minimal);
+  return (netio_pkt_minimal_metadata_t*) &pkt->__metadata;
+}
+
+
+/** Determine whether a packet has 'minimal' metadata.
+ * @ingroup pktfuncs
+ *
+ * This function will return nonzero if the packet is an 'egress'
+ * packet (i.e. one on which @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer() have been called, or one
+ * retrieved by @ref netio_get_buffer()), and zero if the packet
+ * is an 'ingress' packet (i.e. one retrieved by @ref netio_get_packet(),
+ * which has not been converted into an 'egress' packet).
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet has minimal metadata.
+ */
+static __inline unsigned int
+NETIO_PKT_IS_MINIMAL(netio_pkt_t* pkt)
+{
+  return pkt->__packet.bits.__minimal;
+}
+
+
+/** Return a handle for a packet's storage.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A handle for the packet's storage.
+ */
+static __inline netio_pkt_handle_t
+NETIO_PKT_HANDLE(netio_pkt_t* pkt)
+{
+  netio_pkt_handle_t h;
+  h.word = pkt->__packet.word;
+  return h;
+}
+
+
+/** A special reserved value indicating the absence of a packet handle.
+ *
+ * @ingroup pktfuncs
+ */
+#define NETIO_PKT_HANDLE_NONE ((netio_pkt_handle_t) { 0 })
+
+
+/** Test whether a packet handle is valid.
+ *
+ * Applications may wish to use the reserved value NETIO_PKT_HANDLE_NONE
+ * to indicate no packet at all.  This function tests to see if a packet
+ * handle is a real handle, not this special reserved value.
+ *
+ * @ingroup pktfuncs
+ *
+ * @param[in] handle Handle on which to operate.
+ * @return One if the packet handle is valid, else zero.
+ */
+static __inline unsigned int
+NETIO_PKT_HANDLE_IS_VALID(netio_pkt_handle_t handle)
+{
+  return handle.word != 0;
+}
+
+
+
+/** Return a pointer to the start of the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] handle Handle on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA_H(netio_pkt_handle_t handle)
+{
+  return _NETIO_PKT_HANDLE_BASE(handle) + NETIO_PACKET_PADDING;
+}
+
+
+/** Return the length of the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's custom header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  /*
+   * Note that we effectively need to extract a quantity from the flags word
+   * which is measured in words, and then turn it into bytes by shifting
+   * it left by 2.  We do this all at once by just shifting right two less
+   * bits, and shifting the mask up two bits.
+   */
+  return ((mda->__flags >> (_NETIO_PKT_CUSTOM_LEN_SHIFT - 2)) &
+          (_NETIO_PKT_CUSTOM_LEN_RMASK << 2));
+}
+
+
+/** Return the length of the packet, starting with the custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (__NETIO_PKT_NOTIF_HEADER(pkt).bits.__transfer_size -
+          NETIO_PACKET_PADDING);
+}
+
+
+/** Return a pointer to the start of the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return NETIO_PKT_CUSTOM_DATA_H(NETIO_PKT_HANDLE(pkt));
+}
+
+
+/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  /*
+   * Note that we effectively need to extract a quantity from the flags word
+   * which is measured in words, and then turn it into bytes by shifting
+   * it left by 2.  We do this all at once by just shifting right two less
+   * bits, and shifting the mask up two bits.  We then add two bytes.
+   */
+  return ((mda->__flags >> (_NETIO_PKT_L2_LEN_SHIFT - 2)) &
+          (_NETIO_PKT_L2_LEN_RMASK << 2)) + 2;
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt) -
+          NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda,pkt));
+}
+
+
+/** Return a pointer to the start of the packet's L2 (Ethernet) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_CUSTOM_DATA_M(mda, pkt) +
+          NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt));
+}
+
+
+/** Retrieve the length of the packet, starting with the L3 (generally,
+ *  the IP) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_L2_LENGTH_M(mda, pkt) -
+          NETIO_PKT_L2_HEADER_LENGTH_M(mda,pkt));
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup ingress
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_L2_DATA_M(mda, pkt) +
+          NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt));
+}
+
+
+/** Return the ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given an ordinal number when it is delivered by the IPP.
+ * In the medium term, the ordinal is unique and monotonically increasing,
+ * being incremented by 1 for each packet; the ordinal of the first packet
+ * delivered after the IPP starts is zero.  (Since the ordinal is of finite
+ * size, given enough input packets, it will eventually wrap around to zero;
+ * in the long term, therefore, ordinals are not unique.)  The ordinals
+ * handed out by different IPPs are not disjoint, so two packets from
+ * different IPPs may have identical ordinals.  Packets dropped by the
+ * IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP packet ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__packet_ordinal;
+}
+
+
+/** Return the per-group ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given a per-group ordinal number when it is
+ * delivered by the IPP. By default, the group is the packet's VLAN,
+ * although IPP can be recompiled to use different values.  In
+ * the medium term, the ordinal is unique and monotonically
+ * increasing, being incremented by 1 for each packet; the ordinal of
+ * the first packet distributed to a particular group is zero.
+ * (Since the ordinal is of finite size, given enough input packets,
+ * it will eventually wrap around to zero; in the long term,
+ * therefore, ordinals are not unique.)  The ordinals handed out by
+ * different IPPs are not disjoint, so two packets from different IPPs
+ * may have identical ordinals; similarly, packets distributed to
+ * different groups may have identical ordinals.  Packets dropped by
+ * the IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP, per-group ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_GROUP_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__group_ordinal;
+}
+
+
+/** Return the VLAN ID assigned to the packet.
+ * @ingroup ingress
+ *
+ * This value is usually contained within the packet header.
+ *
+ * This value will be zero if the packet does not have a VLAN tag, or if
+ * this value was not extracted from the packet.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's VLAN ID.
+ */
+static __inline unsigned short
+NETIO_PKT_VLAN_ID_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  int vl = (mda->__flags >> _NETIO_PKT_VLAN_SHIFT) & _NETIO_PKT_VLAN_RMASK;
+  unsigned short* pkt_p;
+  int index;
+  unsigned short val;
+
+  if (vl == _NETIO_PKT_VLAN_NONE)
+    return 0;
+
+  pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt);
+  index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK;
+
+  val = pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_VLAN_SHIFT) &
+              _NETIO_PKT_INFO_VLAN_RMASK];
+
+#ifdef __TILECC__
+  return (__insn_bytex(val) >> 16) & 0xFFF;
+#else
+  return (__builtin_bswap32(val) >> 16) & 0xFFF;
+#endif
+}
+
+
+/** Return the ethertype of the packet.
+ * @ingroup ingress
+ *
+ * This value is usually contained within the packet header.
+ *
+ * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED_M()
+ * returns true, and otherwise, may not be well defined.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's ethertype.
+ */
+static __inline unsigned short
+NETIO_PKT_ETHERTYPE_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  unsigned short* pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt);
+  int index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK;
+
+  unsigned short val =
+    pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_ETYPE_SHIFT) &
+          _NETIO_PKT_INFO_ETYPE_RMASK];
+
+  return __builtin_bswap32(val) >> 16;
+}
+
+
+/** Return the flow hash computed on the packet.
+ * @ingroup ingress
+ *
+ * For TCP and UDP packets, this hash is calculated by hashing together
+ * the "5-tuple" values, specifically the source IP address, destination
+ * IP address, protocol type, source port and destination port.
+ * The hash value is intended to be helpful for millions of distinct
+ * flows.
+ *
+ * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is
+ * derived by hashing together the source and destination IP addresses.
+ *
+ * For MPLS-encapsulated packets, the flow hash is derived by hashing
+ * the first MPLS label.
+ *
+ * For all other packets the flow hash is computed from the source
+ * and destination Ethernet addresses.
+ *
+ * The hash is symmetric, meaning it produces the same value if the
+ * source and destination are swapped. The only exceptions are
+ * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple
+ * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32
+ * (Encap Security Payload), which use only the destination address
+ * since the source address is not meaningful.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's 32-bit flow hash.
+ */
+static __inline unsigned int
+NETIO_PKT_FLOW_HASH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__flow_hash;
+}
+
+
+/** Return the first word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first
+ * word of user data contains the least significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_low()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's first word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_0_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__user_data_0;
+}
+
+
+/** Return the second word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second
+ * word of user data contains the most significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_high()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's second word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_1_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__user_data_1;
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L4 checksum was calculated.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags & _NETIO_PKT_NO_L4_CSUM_MASK);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to
+ *  be correct.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags &
+           (_NETIO_PKT_BAD_L4_CSUM_MASK | _NETIO_PKT_NO_L4_CSUM_MASK));
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L3 (IP) checksum was calculated.
+*/
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags & _NETIO_PKT_NO_L3_CSUM_MASK);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated and found to be
+ *  correct.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags &
+           (_NETIO_PKT_BAD_L3_CSUM_MASK | _NETIO_PKT_NO_L3_CSUM_MASK));
+}
+
+
+/** Determine whether the ethertype was recognized and L3 packet data was
+ *  processed.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the ethertype was recognized and L3 packet data was
+ *   processed.
+ */
+static __inline unsigned int
+NETIO_PKT_ETHERTYPE_RECOGNIZED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags & _NETIO_PKT_TYPE_UNRECOGNIZED_MASK);
+}
+
+
+/** Retrieve the status of a packet and any errors that may have occurred
+ * during ingress processing (length mismatches, CRC errors, etc.).
+ * @ingroup ingress
+ *
+ * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns zero are always reported as underlength, as there is no a priori
+ * means to determine their length.  Normally, applications should use
+ * @ref NETIO_PKT_BAD_M() instead of explicitly checking status with this
+ * function.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's status.
+ */
+static __inline netio_pkt_status_t
+NETIO_PKT_STATUS_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status;
+}
+
+
+/** Report whether a packet is bad (i.e., was shorter than expected based on
+ *  its headers, or had a bad CRC).
+ * @ingroup ingress
+ *
+ * Note that this function does not verify L3 or L4 checksums.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet is bad and should be discarded.
+ */
+static __inline unsigned int
+NETIO_PKT_BAD_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return ((NETIO_PKT_STATUS_M(mda, pkt) & 1) &&
+          (NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt) ||
+           NETIO_PKT_STATUS_M(mda, pkt) == NETIO_PKT_STATUS_BAD));
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return mmd->l2_length;
+}
+
+
+/** Return the length of the L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd,
+                              netio_pkt_t* pkt)
+{
+  return mmd->l3_offset - mmd->l2_offset;
+}
+
+
+/** Return the length of the packet, starting with the L3 (IP) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_L2_LENGTH_MM(mmd, pkt) -
+          NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt));
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup egress
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return _NETIO_PKT_BASE(pkt) + mmd->l3_offset;
+}
+
+
+/** Return a pointer to the packet's L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return _NETIO_PKT_BASE(pkt) + mmd->l2_offset;
+}
+
+
+/** Retrieve the status of a packet and any errors that may have occurred
+ * during ingress processing (length mismatches, CRC errors, etc.).
+ * @ingroup ingress
+ *
+ * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns zero are always reported as underlength, as there is no a priori
+ * means to determine their length.  Normally, applications should use
+ * @ref NETIO_PKT_BAD() instead of explicitly checking status with this
+ * function.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's status.
+ */
+static __inline netio_pkt_status_t
+NETIO_PKT_STATUS(netio_pkt_t* pkt)
+{
+  netio_assert(!pkt->__packet.bits.__minimal);
+
+  return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status;
+}
+
+
+/** Report whether a packet is bad (i.e., was shorter than expected based on
+ *  its headers, or had a bad CRC).
+ * @ingroup ingress
+ *
+ * Note that this function does not verify L3 or L4 checksums.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet is bad and should be discarded.
+ */
+static __inline unsigned int
+NETIO_PKT_BAD(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_BAD_M(mda, pkt);
+}
+
+
+/** Return the length of the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's custom header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_HEADER_LENGTH(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt);
+}
+
+
+/** Return the length of the packet, starting with the custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return  The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_LENGTH(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt);
+}
+
+
+/** Return a pointer to the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_CUSTOM_DATA_M(mda, pkt);
+}
+
+
+/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt);
+  }
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return  The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L2_LENGTH_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L2_LENGTH_M(mda, pkt);
+  }
+}
+
+
+/** Return a pointer to the packet's L2 (Ethernet) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L2_DATA_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L2_DATA_M(mda, pkt);
+  }
+}
+
+
+/** Retrieve the length of the packet, starting with the L3 (generally, the IP)
+ * header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L3_LENGTH_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L3_LENGTH_M(mda, pkt);
+  }
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup pktfuncs
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L3_DATA_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L3_DATA_M(mda, pkt);
+  }
+}
+
+
+/** Return the ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given an ordinal number when it is delivered by the IPP.
+ * In the medium term, the ordinal is unique and monotonically increasing,
+ * being incremented by 1 for each packet; the ordinal of the first packet
+ * delivered after the IPP starts is zero.  (Since the ordinal is of finite
+ * size, given enough input packets, it will eventually wrap around to zero;
+ * in the long term, therefore, ordinals are not unique.)  The ordinals
+ * handed out by different IPPs are not disjoint, so two packets from
+ * different IPPs may have identical ordinals.  Packets dropped by the
+ * IPP or by the I/O shim are not assigned ordinals.
+ *
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP packet ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_ORDINAL(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_ORDINAL_M(mda, pkt);
+}
+
+
+/** Return the per-group ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given a per-group ordinal number when it is
+ * delivered by the IPP. By default, the group is the packet's VLAN,
+ * although IPP can be recompiled to use different values.  In
+ * the medium term, the ordinal is unique and monotonically
+ * increasing, being incremented by 1 for each packet; the ordinal of
+ * the first packet distributed to a particular group is zero.
+ * (Since the ordinal is of finite size, given enough input packets,
+ * it will eventually wrap around to zero; in the long term,
+ * therefore, ordinals are not unique.)  The ordinals handed out by
+ * different IPPs are not disjoint, so two packets from different IPPs
+ * may have identical ordinals; similarly, packets distributed to
+ * different groups may have identical ordinals.  Packets dropped by
+ * the IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP, per-group ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_GROUP_ORDINAL(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_GROUP_ORDINAL_M(mda, pkt);
+}
+
+
+/** Return the VLAN ID assigned to the packet.
+ * @ingroup ingress
+ *
+ * This is usually also contained within the packet header.  If the packet
+ * does not have a VLAN tag, the VLAN ID returned by this function is zero.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's VLAN ID.
+ */
+static __inline unsigned short
+NETIO_PKT_VLAN_ID(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_VLAN_ID_M(mda, pkt);
+}
+
+
+/** Return the ethertype of the packet.
+ * @ingroup ingress
+ *
+ * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns true, and otherwise, may not be well defined.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's ethertype.
+ */
+static __inline unsigned short
+NETIO_PKT_ETHERTYPE(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_ETHERTYPE_M(mda, pkt);
+}
+
+
+/** Return the flow hash computed on the packet.
+ * @ingroup ingress
+ *
+ * For TCP and UDP packets, this hash is calculated by hashing together
+ * the "5-tuple" values, specifically the source IP address, destination
+ * IP address, protocol type, source port and destination port.
+ * The hash value is intended to be helpful for millions of distinct
+ * flows.
+ *
+ * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is
+ * derived by hashing together the source and destination IP addresses.
+ *
+ * For MPLS-encapsulated packets, the flow hash is derived by hashing
+ * the first MPLS label.
+ *
+ * For all other packets the flow hash is computed from the source
+ * and destination Ethernet addresses.
+ *
+ * The hash is symmetric, meaning it produces the same value if the
+ * source and destination are swapped. The only exceptions are
+ * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple
+ * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32
+ * (Encap Security Payload), which use only the destination address
+ * since the source address is not meaningful.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's 32-bit flow hash.
+ */
+static __inline unsigned int
+NETIO_PKT_FLOW_HASH(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_FLOW_HASH_M(mda, pkt);
+}
+
+
+/** Return the first word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first
+ * word of user data contains the least significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_low()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's first word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_0(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_USER_DATA_0_M(mda, pkt);
+}
+
+
+/** Return the second word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second
+ * word of user data contains the most significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_high()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's second word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_1(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_USER_DATA_1_M(mda, pkt);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L4 checksum was calculated.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CALCULATED(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_L4_CSUM_CALCULATED_M(mda, pkt);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to
+ *  be correct.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CORRECT(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L3 (IP) checksum was calculated.
+*/
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CALCULATED(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_L3_CSUM_CALCULATED_M(mda, pkt);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated and found to be
+ *  correct.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CORRECT(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_L3_CSUM_CORRECT_M(mda, pkt);
+}
+
+
+/** Determine whether the Ethertype was recognized and L3 packet data was
+ *  processed.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the Ethertype was recognized and L3 packet data was
+ *   processed.
+ */
+static __inline unsigned int
+NETIO_PKT_ETHERTYPE_RECOGNIZED(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt);
+}
+
+
+/** Set an egress packet's L2 length, using a metadata pointer to speed the
+ * computation.
+ * @ingroup egress
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] len Packet L2 length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt,
+                           int len)
+{
+  mmd->l2_length = len;
+}
+
+
+/** Set an egress packet's L2 length.
+ * @ingroup egress
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] len Packet L2 length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_LENGTH(netio_pkt_t* pkt, int len)
+{
+  netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+  NETIO_PKT_SET_L2_LENGTH_MM(mmd, pkt, len);
+}
+
+
+/** Set an egress packet's L2 header length, using a metadata pointer to
+ *  speed the computation.
+ * @ingroup egress
+ *
+ * It is not normally necessary to call this routine; only the L2 length,
+ * not the header length, is needed to transmit a packet.  It may be useful if
+ * the egress packet will later be processed by code which expects to use
+ * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload.
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] len Packet L2 header length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd,
+                                  netio_pkt_t* pkt, int len)
+{
+  mmd->l3_offset = mmd->l2_offset + len;
+}
+
+
+/** Set an egress packet's L2 header length.
+ * @ingroup egress
+ *
+ * It is not normally necessary to call this routine; only the L2 length,
+ * not the header length, is needed to transmit a packet.  It may be useful if
+ * the egress packet will later be processed by code which expects to use
+ * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload.
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] len Packet L2 header length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_HEADER_LENGTH(netio_pkt_t* pkt, int len)
+{
+  netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+  NETIO_PKT_SET_L2_HEADER_LENGTH_MM(mmd, pkt, len);
+}
+
+
+/** Set up an egress packet for hardware checksum computation, using a
+ *  metadata pointer to speed the operation.
+ * @ingroup egress
+ *
+ *  NetIO provides the ability to automatically calculate a standard
+ *  16-bit Internet checksum on transmitted packets.  The application
+ *  may specify the point in the packet where the checksum starts, the
+ *  number of bytes to be checksummed, and the two bytes in the packet
+ *  which will be replaced with the completed checksum.  (If the range
+ *  of bytes to be checksummed includes the bytes to be replaced, the
+ *  initial values of those bytes will be included in the checksum.)
+ *
+ *  For some protocols, the packet checksum covers data which is not present
+ *  in the packet, or is at least not contiguous to the main data payload.
+ *  For instance, the TCP checksum includes a "pseudo-header" which includes
+ *  the source and destination IP addresses of the packet.  To accommodate
+ *  this, the checksum engine may be "seeded" with an initial value, which
+ *  the application would need to compute based on the specific protocol's
+ *  requirements.  Note that the seed is given in host byte order (little-
+ *  endian), not network byte order (big-endian); code written to compute a
+ *  pseudo-header checksum in network byte order will need to byte-swap it
+ *  before use as the seed.
+ *
+ *  Note that the checksum is computed as part of the transmission process,
+ *  so it will not be present in the packet upon completion of this routine.
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] start Offset within L2 packet of the first byte to include in
+ *   the checksum.
+ * @param[in] length Number of bytes to include in the checksum.
+ *   the checksum.
+ * @param[in] location Offset within L2 packet of the first of the two bytes
+ *   to be replaced with the calculated checksum.
+ * @param[in] seed Initial value of the running checksum before any of the
+ *   packet data is added.
+ */
+static __inline void
+NETIO_PKT_DO_EGRESS_CSUM_MM(netio_pkt_minimal_metadata_t* mmd,
+                            netio_pkt_t* pkt, int start, int length,
+                            int location, uint16_t seed)
+{
+  mmd->csum_start = start;
+  mmd->csum_length = length;
+  mmd->csum_location = location;
+  mmd->csum_seed = seed;
+  mmd->flags |= _NETIO_PKT_NEED_EDMA_CSUM_MASK;
+}
+
+
+/** Set up an egress packet for hardware checksum computation.
+ * @ingroup egress
+ *
+ *  NetIO provides the ability to automatically calculate a standard
+ *  16-bit Internet checksum on transmitted packets.  The application
+ *  may specify the point in the packet where the checksum starts, the
+ *  number of bytes to be checksummed, and the two bytes in the packet
+ *  which will be replaced with the completed checksum.  (If the range
+ *  of bytes to be checksummed includes the bytes to be replaced, the
+ *  initial values of those bytes will be included in the checksum.)
+ *
+ *  For some protocols, the packet checksum covers data which is not present
+ *  in the packet, or is at least not contiguous to the main data payload.
+ *  For instance, the TCP checksum includes a "pseudo-header" which includes
+ *  the source and destination IP addresses of the packet.  To accommodate
+ *  this, the checksum engine may be "seeded" with an initial value, which
+ *  the application would need to compute based on the specific protocol's
+ *  requirements.  Note that the seed is given in host byte order (little-
+ *  endian), not network byte order (big-endian); code written to compute a
+ *  pseudo-header checksum in network byte order will need to byte-swap it
+ *  before use as the seed.
+ *
+ *  Note that the checksum is computed as part of the transmission process,
+ *  so it will not be present in the packet upon completion of this routine.
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] start Offset within L2 packet of the first byte to include in
+ *   the checksum.
+ * @param[in] length Number of bytes to include in the checksum.
+ *   the checksum.
+ * @param[in] location Offset within L2 packet of the first of the two bytes
+ *   to be replaced with the calculated checksum.
+ * @param[in] seed Initial value of the running checksum before any of the
+ *   packet data is added.
+ */
+static __inline void
+NETIO_PKT_DO_EGRESS_CSUM(netio_pkt_t* pkt, int start, int length,
+                         int location, uint16_t seed)
+{
+  netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+  NETIO_PKT_DO_EGRESS_CSUM_MM(mmd, pkt, start, length, location, seed);
+}
+
+
+/** Return the number of bytes which could be prepended to a packet, using a
+ *  metadata pointer to speed the operation.
+ *  See @ref netio_populate_prepend_buffer() to get a full description of
+ *  prepending.
+ *
+ * @param[in,out] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (pkt->__packet.bits.__offset << 6) +
+         NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt);
+}
+
+
+/** Return the number of bytes which could be prepended to a packet, using a
+ *  metadata pointer to speed the operation.
+ *  See @ref netio_populate_prepend_buffer() to get a full description of
+ *  prepending.
+ * @ingroup egress
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return (pkt->__packet.bits.__offset << 6) + mmd->l2_offset;
+}
+
+
+/** Return the number of bytes which could be prepended to a packet.
+ *  See @ref netio_populate_prepend_buffer() to get a full description of
+ *  prepending.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_PREPEND_AVAIL_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_PREPEND_AVAIL_M(mda, pkt);
+  }
+}
+
+
+/** Flush a packet's minimal metadata from the cache, using a metadata pointer
+ *  to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+                                    netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's minimal metadata from the cache, using a metadata
+ *  pointer to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+                                  netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's minimal metadata from the cache,
+ *  using a metadata pointer to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+                                        netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's metadata from the cache, using a metadata pointer
+ *  to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's metadata from the cache, using a metadata
+ *  pointer to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's metadata from the cache,
+ *  using a metadata pointer to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_METADATA(netio_pkt_t* pkt)
+{
+}
+
+/** Number of NUMA nodes we can distribute buffers to.
+ * @ingroup setup */
+#define NETIO_NUM_NODE_WEIGHTS  16
+
+/**
+ * @brief An object for specifying the characteristics of NetIO communication
+ * endpoint.
+ *
+ * @ingroup setup
+ *
+ * The @ref netio_input_register() function uses this structure to define
+ * how an application tile will communicate with an IPP.
+ *
+ *
+ * Future updates to NetIO may add new members to this structure,
+ * which can affect the success of the registration operation.  Thus,
+ * if dynamically initializing the structure, applications are urged to
+ * zero it out first, for example:
+ *
+ * @code
+ * netio_input_config_t config;
+ * memset(&config, 0, sizeof (config));
+ * config.flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE;
+ * config.num_receive_packets = NETIO_MAX_RECEIVE_PKTS;
+ * config.queue_id = 0;
+ *     .
+ *     .
+ *     .
+ * @endcode
+ *
+ * since that guarantees that any unused structure members, including
+ * members which did not exist when the application was first developed,
+ * will not have unexpected values.
+ *
+ * If statically initializing the structure, we strongly recommend use of
+ * C99-style named initializers, for example:
+ *
+ * @code
+ * netio_input_config_t config = {
+ *    .flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE,
+ *    .num_receive_packets = NETIO_MAX_RECEIVE_PKTS,
+ *    .queue_id = 0,
+ * },
+ * @endcode
+ *
+ * instead of the old-style structure initialization:
+ *
+ * @code
+ * // Bad example! Currently equivalent to the above, but don't do this.
+ * netio_input_config_t config = {
+ *    NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE, NETIO_MAX_RECEIVE_PKTS, 0
+ * },
+ * @endcode
+ *
+ * since the C99 style requires no changes to the code if elements of the
+ * config structure are rearranged.  (It also makes the initialization much
+ * easier to understand.)
+ *
+ * Except for items which address a particular tile's transmit or receive
+ * characteristics, such as the ::NETIO_RECV flag, applications are advised
+ * to specify the same set of configuration data on all registrations.
+ * This prevents differing results if multiple tiles happen to do their
+ * registration operations in a different order on different invocations of
+ * the application.  This is particularly important for things like link
+ * management flags, and buffer size and homing specifications.
+ *
+ * Unless the ::NETIO_FIXED_BUFFER_VA flag is specified in flags, the NetIO
+ * buffer pool is automatically created and mapped into the application's
+ * virtual address space at an address chosen by the operating system,
+ * using the common memory (cmem) facility in the Tilera Multicore
+ * Components library.  The cmem facility allows multiple processes to gain
+ * access to shared memory which is mapped into each process at an
+ * identical virtual address.  In order for this to work, the processes
+ * must have a common ancestor, which must create the common memory using
+ * tmc_cmem_init().
+ *
+ * In programs using the iLib process creation API, or in programs which use
+ * only one process (which include programs using the pthreads library),
+ * tmc_cmem_init() is called automatically.  All other applications
+ * must call it explicitly, before any child processes which might call
+ * netio_input_register() are created.
+ */
+typedef struct
+{
+  /** Registration characteristics.
+
+      This value determines several characteristics of the registration;
+      flags for different types of behavior are ORed together to make the
+      final flag value.  Generally applications should specify exactly
+      one flag from each of the following categories:
+
+      - Whether the application will be receiving packets on this queue
+        (::NETIO_RECV or ::NETIO_NO_RECV).
+
+      - Whether the application will be transmitting packets on this queue,
+        and if so, whether it will request egress checksum calculation
+        (::NETIO_XMIT, ::NETIO_XMIT_CSUM, or ::NETIO_NO_XMIT).  It is
+        legal to call netio_get_buffer() without one of the XMIT flags,
+        as long as ::NETIO_RECV is specified; in this case, the retrieved
+        buffers must be passed to another tile for transmission.
+
+      - Whether the application expects any vendor-specific tags in
+        its packets' L2 headers (::NETIO_TAG_NONE, ::NETIO_TAG_BRCM,
+        or ::NETIO_TAG_MRVL).  This must match the configuration of the
+        target IPP.
+
+      To accommodate applications written to previous versions of the NetIO
+      interface, none of the flags above are currently required; if omitted,
+      NetIO behaves more or less as if ::NETIO_RECV | ::NETIO_XMIT_CSUM |
+      ::NETIO_TAG_NONE were used.  However, explicit specification of
+      the relevant flags allows NetIO to do a better job of resource
+      allocation, allows earlier detection of certain configuration errors,
+      and may enable advanced features or higher performance in the future,
+      so their use is strongly recommended.
+
+      Note that specifying ::NETIO_NO_RECV along with ::NETIO_NO_XMIT
+      is a special case, intended primarily for use by programs which
+      retrieve network statistics or do link management operations.
+      When these flags are both specified, the resulting queue may not
+      be used with NetIO routines other than netio_get(), netio_set(),
+      and netio_input_unregister().  See @ref link for more information
+      on link management.
+
+      Other flags are optional; their use is described below.
+  */
+  int flags;
+
+  /** Interface name.  This is a string which identifies the specific
+      Ethernet controller hardware to be used.  The format of the string
+      is a device type and a device index, separated by a slash; so,
+      the first 10 Gigabit Ethernet controller is named "xgbe/0", while
+      the second 10/100/1000 Megabit Ethernet controller is named "gbe/1".
+   */
+  const char* interface;
+
+  /** Receive packet queue size.  This specifies the maximum number
+      of ingress packets that can be received on this queue without
+      being retrieved by @ref netio_get_packet().  If the IPP's distribution
+      algorithm calls for a packet to be sent to this queue, and this
+      number of packets are already pending there, the new packet
+      will either be discarded, or sent to another tile registered
+      for the same queue_id (see @ref drops).  This value must
+      be at least ::NETIO_MIN_RECEIVE_PKTS, can always be at least
+      ::NETIO_MAX_RECEIVE_PKTS, and may be larger than that on certain
+      interfaces.
+   */
+  int num_receive_packets;
+
+  /** The queue ID being requested.  Legal values for this range from 0
+      to ::NETIO_MAX_QUEUE_ID, inclusive.  ::NETIO_MAX_QUEUE_ID is always
+      greater than or equal to the number of tiles; this allows one queue
+      for each tile, plus at least one additional queue.  Some applications
+      may wish to use the additional queue as a destination for unwanted
+      packets, since packets delivered to queues for which no tiles have
+      registered are discarded.
+   */
+  unsigned int queue_id;
+
+  /** Maximum number of small send buffers to be held in the local empty
+      buffer cache.  This specifies the size of the area which holds
+      empty small egress buffers requested from the IPP but not yet
+      retrieved via @ref netio_get_buffer().  This value must be greater
+      than zero if the application will ever use @ref netio_get_buffer()
+      to allocate empty small egress buffers; it may be no larger than
+      ::NETIO_MAX_SEND_BUFFERS.  See @ref epp for more details on empty
+      buffer caching.
+   */
+  int num_send_buffers_small_total;
+
+  /** Number of small send buffers to be preallocated at registration.
+      If this value is nonzero, the specified number of empty small egress
+      buffers will be requested from the IPP during the netio_input_register
+      operation; this may speed the execution of @ref netio_get_buffer().
+      This may be no larger than @ref num_send_buffers_small_total.  See @ref
+      epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_small_prealloc;
+
+  /** Maximum number of large send buffers to be held in the local empty
+      buffer cache.  This specifies the size of the area which holds empty
+      large egress buffers requested from the IPP but not yet retrieved via
+      @ref netio_get_buffer().  This value must be greater than zero if the
+      application will ever use @ref netio_get_buffer() to allocate empty
+      large egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS.
+      See @ref epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_large_total;
+
+  /** Number of large send buffers to be preallocated at registration.
+      If this value is nonzero, the specified number of empty large egress
+      buffers will be requested from the IPP during the netio_input_register
+      operation; this may speed the execution of @ref netio_get_buffer().
+      This may be no larger than @ref num_send_buffers_large_total.  See @ref
+      epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_large_prealloc;
+
+  /** Maximum number of jumbo send buffers to be held in the local empty
+      buffer cache.  This specifies the size of the area which holds empty
+      jumbo egress buffers requested from the IPP but not yet retrieved via
+      @ref netio_get_buffer().  This value must be greater than zero if the
+      application will ever use @ref netio_get_buffer() to allocate empty
+      jumbo egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS.
+      See @ref epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_jumbo_total;
+
+  /** Number of jumbo send buffers to be preallocated at registration.
+      If this value is nonzero, the specified number of empty jumbo egress
+      buffers will be requested from the IPP during the netio_input_register
+      operation; this may speed the execution of @ref netio_get_buffer().
+      This may be no larger than @ref num_send_buffers_jumbo_total.  See @ref
+      epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_jumbo_prealloc;
+
+  /** Total packet buffer size.  This determines the total size, in bytes,
+      of the NetIO buffer pool.  Note that the maximum number of available
+      buffers of each size is determined during hypervisor configuration
+      (see the <em>System Programmer's Guide</em> for details); this just
+      influences how much host memory is allocated for those buffers.
+
+      The buffer pool is allocated from common memory, which will be
+      automatically initialized if needed.  If your buffer pool is larger
+      than 240 MB, you might need to explicitly call @c tmc_cmem_init(),
+      as described in the Application Libraries Reference Manual (UG227).
+
+      Packet buffers are currently allocated in chunks of 16 MB; this
+      value will be rounded up to the next larger multiple of 16 MB.
+      If this value is zero, a default of 32 MB will be used; this was
+      the value used by previous versions of NetIO.  Note that taking this
+      default also affects the placement of buffers on Linux NUMA nodes.
+      See @ref buffer_node_weights for an explanation of buffer placement.
+
+      In order to successfully allocate packet buffers, Linux must have
+      available huge pages on the relevant Linux NUMA nodes.  See the
+      <em>System Programmer's Guide</em> for information on configuring
+      huge page support in Linux.
+   */
+  uint64_t total_buffer_size;
+
+  /** Buffer placement weighting factors.
+
+      This array specifies the relative amount of buffering to place
+      on each of the available Linux NUMA nodes.  This array is
+      indexed by the NUMA node, and the values in the array are
+      proportional to the amount of buffer space to allocate on that
+      node.
+
+      If memory striping is enabled in the Hypervisor, then there is
+      only one logical NUMA node (node 0). In that case, NetIO will by
+      default ignore the suggested buffer node weights, and buffers
+      will be striped across the physical memory controllers. See
+      UG209 System Programmer's Guide for a description of the
+      hypervisor option that controls memory striping.
+
+      If memory striping is disabled, then there are up to four NUMA
+      nodes, corresponding to the four DDRAM controllers in the TILE
+      processor architecture.  See UG100 Tile Processor Architecture
+      Overview for a diagram showing the location of each of the DDRAM
+      controllers relative to the tile array.
+
+      For instance, if memory striping is disabled, the following
+      configuration strucure:
+
+      @code
+      netio_input_config_t config = {
+            .
+            .
+            .
+        .total_buffer_size = 4 * 16 * 1024 * 1024;
+        .buffer_node_weights = { 1, 0, 1, 0 },
+      },
+      @endcode
+
+      would result in 32 MB of buffers being placed on controller 0, and
+      32 MB on controller 2.  (Since buffers are allocated in units of
+      16 MB, some sets of weights will not be able to be matched exactly.)
+
+      For the weights to be effective, @ref total_buffer_size must be
+      nonzero.  If @ref total_buffer_size is zero, causing the default
+      32 MB of buffer space to be used, then any specified weights will
+      be ignored, and buffers will positioned as they were in previous
+      versions of NetIO:
+
+      - For xgbe/0 and gbe/0, 16 MB of buffers will be placed on controller 1,
+        and the other 16 MB will be placed on controller 2.
+
+      - For xgbe/1 and gbe/1, 16 MB of buffers will be placed on controller 2,
+        and the other 16 MB will be placed on controller 3.
+
+      If @ref total_buffer_size is nonzero, but all weights are zero,
+      then all buffer space will be allocated on Linux NUMA node zero.
+
+      By default, the specified buffer placement is treated as a hint;
+      if sufficient free memory is not available on the specified
+      controllers, the buffers will be allocated elsewhere.  However,
+      if the ::NETIO_STRICT_HOMING flag is specified in @ref flags, then a
+      failure to allocate buffer space exactly as requested will cause the
+      registration operation to fail with an error of ::NETIO_CANNOT_HOME.
+
+      Note that maximal network performance cannot be achieved with
+      only one memory controller.
+   */
+  uint8_t buffer_node_weights[NETIO_NUM_NODE_WEIGHTS];
+
+  /** Fixed virtual address for packet buffers.  Only valid when
+      ::NETIO_FIXED_BUFFER_VA is specified in @ref flags; see the
+      description of that flag for details.
+   */
+  void* fixed_buffer_va;
+
+  /**
+      Maximum number of outstanding send packet requests.  This value is
+      only relevant when an EPP is in use; it determines the number of
+      slots in the EPP's outgoing packet queue which this tile is allowed
+      to consume, and thus the number of packets which may be sent before
+      the sending tile must wait for an acknowledgment from the EPP.
+      Modifying this value is generally only helpful when using @ref
+      netio_send_packet_vector(), where it can help improve performance by
+      allowing a single vector send operation to process more packets.
+      Typically it is not specified, and the default, which divides the
+      outgoing packet slots evenly between all tiles on the chip, is used.
+
+      If a registration asks for more outgoing packet queue slots than are
+      available, ::NETIO_TOOMANY_XMIT will be returned.  The total number
+      of packet queue slots which are available for all tiles for each EPP
+      is subject to change, but is currently ::NETIO_TOTAL_SENDS_OUTSTANDING.
+
+
+      This value is ignored if ::NETIO_XMIT is not specified in flags.
+      If you want to specify a large value here for a specific tile, you are
+      advised to specify NETIO_NO_XMIT on other, non-transmitting tiles so
+      that they do not consume a default number of packet slots.  Any tile
+      transmitting is required to have at least ::NETIO_MIN_SENDS_OUTSTANDING
+      slots allocated to it; values less than that will be silently
+      increased by the NetIO library.
+   */
+  int num_sends_outstanding;
+}
+netio_input_config_t;
+
+
+/** Registration flags; used in the @ref netio_input_config_t structure.
+ * @addtogroup setup
+ */
+/** @{ */
+
+/** Fail a registration request if we can't put packet buffers
+    on the specified memory controllers. */
+#define NETIO_STRICT_HOMING   0x00000002
+
+/** This application expects no tags on its L2 headers. */
+#define NETIO_TAG_NONE        0x00000004
+
+/** This application expects Marvell extended tags on its L2 headers. */
+#define NETIO_TAG_MRVL        0x00000008
+
+/** This application expects Broadcom tags on its L2 headers. */
+#define NETIO_TAG_BRCM        0x00000010
+
+/** This registration may call routines which receive packets. */
+#define NETIO_RECV            0x00000020
+
+/** This registration may not call routines which receive packets. */
+#define NETIO_NO_RECV         0x00000040
+
+/** This registration may call routines which transmit packets. */
+#define NETIO_XMIT            0x00000080
+
+/** This registration may call routines which transmit packets with
+    checksum acceleration. */
+#define NETIO_XMIT_CSUM       0x00000100
+
+/** This registration may not call routines which transmit packets. */
+#define NETIO_NO_XMIT         0x00000200
+
+/** This registration wants NetIO buffers mapped at an application-specified
+    virtual address.
+
+    NetIO buffers are by default created by the TMC common memory facility,
+    which must be configured by a common ancestor of all processes sharing
+    a network interface.  When this flag is specified, NetIO buffers are
+    instead mapped at an address chosen by the application (and specified
+    in @ref netio_input_config_t::fixed_buffer_va).  This allows multiple
+    unrelated but cooperating processes to share a NetIO interface.
+    All processes sharing the same interface must specify this flag,
+    and all must specify the same fixed virtual address.
+
+    @ref netio_input_config_t::fixed_buffer_va must be a
+    multiple of 16 MB, and the packet buffers will occupy @ref
+    netio_input_config_t::total_buffer_size bytes of virtual address
+    space, beginning at that address.  If any of those virtual addresses
+    are currently occupied by other memory objects, like application or
+    shared library code or data, @ref netio_input_register() will return
+    ::NETIO_FAULT.  While it is impossible to provide a fixed_buffer_va
+    which will work for all applications, a good first guess might be to
+    use 0xb0000000 minus @ref netio_input_config_t::total_buffer_size.
+    If that fails, it might be helpful to consult the running application's
+    virtual address description file (/proc/<em>pid</em>/maps) to see
+    which regions of virtual address space are available.
+ */
+#define NETIO_FIXED_BUFFER_VA 0x00000400
+
+/** This registration call will not complete unless the network link
+    is up.  The process will wait several seconds for this to happen (the
+    precise interval is link-dependent), but if the link does not come up,
+    ::NETIO_LINK_DOWN will be returned.  This flag is the default if
+    ::NETIO_NOREQUIRE_LINK_UP is not specified.  Note that this flag by
+    itself does not request that the link be brought up; that can be done
+    with the ::NETIO_AUTO_LINK_UPDN or ::NETIO_AUTO_LINK_UP flags (the
+    latter is the default if no NETIO_AUTO_LINK_xxx flags are specified),
+    or by explicitly setting the link's desired state via netio_set().
+    If the link is not brought up by one of those methods, and this flag
+    is specified, the registration operation will return ::NETIO_LINK_DOWN.
+    This flag is ignored if it is specified along with ::NETIO_NO_XMIT and
+    ::NETIO_NO_RECV.  See @ref link for more information on link
+    management.
+ */
+#define NETIO_REQUIRE_LINK_UP    0x00000800
+
+/** This registration call will complete even if the network link is not up.
+    Whenever the link is not up, packets will not be sent or received:
+    netio_get_packet() will return ::NETIO_NOPKT once all queued packets
+    have been drained, and netio_send_packet() and similar routines will
+    return NETIO_QUEUE_FULL once the outgoing packet queue in the EPP
+    or the I/O shim is full.  See @ref link for more information on link
+    management.
+ */
+#define NETIO_NOREQUIRE_LINK_UP  0x00001000
+
+#ifndef __DOXYGEN__
+/*
+ * These are part of the implementation of the NETIO_AUTO_LINK_xxx flags,
+ * but should not be used directly by applications, and are thus not
+ * documented.
+ */
+#define _NETIO_AUTO_UP        0x00002000
+#define _NETIO_AUTO_DN        0x00004000
+#define _NETIO_AUTO_PRESENT   0x00008000
+#endif
+
+/** Set the desired state of the link to up, allowing any speeds which are
+    supported by the link hardware, as part of this registration operation.
+    Do not take down the link automatically.  This is the default if
+    no other NETIO_AUTO_LINK_xxx flags are specified.  This flag is ignored
+    if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+    See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_UP     (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP)
+
+/** Set the desired state of the link to up, allowing any speeds which are
+    supported by the link hardware, as part of this registration operation.
+    Set the desired state of the link to down the next time no tiles are
+    registered for packet reception or transmission.  This flag is ignored
+    if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+    See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_UPDN   (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP | \
+                                _NETIO_AUTO_DN)
+
+/** Set the desired state of the link to down the next time no tiles are
+    registered for packet reception or transmission.  This flag is ignored
+    if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+    See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_DN     (_NETIO_AUTO_PRESENT | _NETIO_AUTO_DN)
+
+/** Do not bring up the link automatically as part of this registration
+    operation.  Do not take down the link automatically.  This flag
+    is ignored if it is specified along with ::NETIO_NO_XMIT and
+    ::NETIO_NO_RECV.  See @ref link for more information on link management.
+  */
+#define NETIO_AUTO_LINK_NONE   _NETIO_AUTO_PRESENT
+
+
+/** Minimum number of receive packets. */
+#define NETIO_MIN_RECEIVE_PKTS            16
+
+/** Lower bound on the maximum number of receive packets; may be higher
+    than this on some interfaces. */
+#define NETIO_MAX_RECEIVE_PKTS           128
+
+/** Maximum number of send buffers, per packet size. */
+#define NETIO_MAX_SEND_BUFFERS            16
+
+/** Number of EPP queue slots, and thus outstanding sends, per EPP. */
+#define NETIO_TOTAL_SENDS_OUTSTANDING   2015
+
+/** Minimum number of EPP queue slots, and thus outstanding sends, per
+ *  transmitting tile. */
+#define NETIO_MIN_SENDS_OUTSTANDING       16
+
+
+/**@}*/
+
+#ifndef __DOXYGEN__
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+struct __netio_queue_impl_t;
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+struct __netio_queue_user_impl_t;
+
+#endif /* !__DOXYGEN__ */
+
+
+/** A netio_queue_t describes a NetIO communications endpoint.
+ * @ingroup setup
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  uint8_t opaque[8];                 /**< This is an opaque structure. */
+#else
+  struct __netio_queue_impl_t* __system_part;    /**< The system part. */
+  struct __netio_queue_user_impl_t* __user_part; /**< The user part. */
+#ifdef _NETIO_PTHREAD
+  _netio_percpu_mutex_t lock;                    /**< Queue lock. */
+#endif
+#endif
+}
+netio_queue_t;
+
+
+/**
+ * @brief Packet send context.
+ *
+ * @ingroup egress
+ *
+ * Packet send context for use with netio_send_packet_prepare and _commit.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  uint8_t opaque[44];   /**< This is an opaque structure. */
+#else
+  uint8_t flags;        /**< Defined below */
+  uint8_t datalen;      /**< Number of valid words pointed to by data. */
+  uint32_t request[9];  /**< Request to be sent to the EPP or shim.  Note
+                             that this is smaller than the 11-word maximum
+                             request size, since some constant values are
+                             not saved in the context. */
+  uint32_t *data;       /**< Data to be sent to the EPP or shim via IDN. */
+#endif
+}
+netio_send_pkt_context_t;
+
+
+#ifndef __DOXYGEN__
+#define SEND_PKT_CTX_USE_EPP   1  /**< We're sending to an EPP. */
+#define SEND_PKT_CTX_SEND_CSUM 2  /**< Request includes a checksum. */
+#endif
+
+/**
+ * @brief Packet vector entry.
+ *
+ * @ingroup egress
+ *
+ * This data structure is used with netio_send_packet_vector() to send multiple
+ * packets with one NetIO call.  The structure should be initialized by
+ * calling netio_pkt_vector_set(), rather than by setting the fields
+ * directly.
+ *
+ * This structure is guaranteed to be a power of two in size, no
+ * bigger than one L2 cache line, and to be aligned modulo its size.
+ */
+typedef struct
+#ifndef __DOXYGEN__
+__attribute__((aligned(8)))
+#endif
+{
+  /** Reserved for use by the user application.  When initialized with
+   *  the netio_set_pkt_vector_entry() function, this field is guaranteed
+   *  to be visible to readers only after all other fields are already
+   *  visible.  This way it can be used as a valid flag or generation
+   *  counter. */
+  uint8_t user_data;
+
+  /* Structure members below this point should not be accessed directly by
+   * applications, as they may change in the future. */
+
+  /** Low 8 bits of the packet address to send.  The high bits are
+   *  acquired from the 'handle' field. */
+  uint8_t buffer_address_low;
+
+  /** Number of bytes to transmit. */
+  uint16_t size;
+
+  /** The raw handle from a netio_pkt_t.  If this is NETIO_PKT_HANDLE_NONE,
+   *  this vector entry will be skipped and no packet will be transmitted. */
+  netio_pkt_handle_t handle;
+}
+netio_pkt_vector_entry_t;
+
+
+/**
+ * @brief Initialize fields in a packet vector entry.
+ *
+ * @ingroup egress
+ *
+ * @param[out] v Pointer to the vector entry to be initialized.
+ * @param[in] pkt Packet to be transmitted when the vector entry is passed to
+ *        netio_send_packet_vector().  Note that the packet's attributes
+ *        (e.g., its L2 offset and length) are captured at the time this
+ *        routine is called; subsequent changes in those attributes will not
+ *        be reflected in the packet which is actually transmitted.
+ *        Changes in the packet's contents, however, will be so reflected.
+ *        If this is NULL, no packet will be transmitted.
+ * @param[in] user_data User data to be set in the vector entry.
+ *        This function guarantees that the "user_data" field will become
+ *        visible to a reader only after all other fields have become visible.
+ *        This allows a structure in a ring buffer to be written and read
+ *        by a polling reader without any locks or other synchronization.
+ */
+static __inline void
+netio_pkt_vector_set(volatile netio_pkt_vector_entry_t* v, netio_pkt_t* pkt,
+                     uint8_t user_data)
+{
+  if (pkt)
+  {
+    if (NETIO_PKT_IS_MINIMAL(pkt))
+    {
+      netio_pkt_minimal_metadata_t* mmd =
+        (netio_pkt_minimal_metadata_t*) &pkt->__metadata;
+      v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_MM(mmd, pkt) & 0xFF;
+      v->size = NETIO_PKT_L2_LENGTH_MM(mmd, pkt);
+    }
+    else
+    {
+      netio_pkt_metadata_t* mda = &pkt->__metadata;
+      v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_M(mda, pkt) & 0xFF;
+      v->size = NETIO_PKT_L2_LENGTH_M(mda, pkt);
+    }
+    v->handle.word = pkt->__packet.word;
+  }
+  else
+  {
+    v->handle.word = 0;   /* Set handle to NETIO_PKT_HANDLE_NONE. */
+  }
+
+  __asm__("" : : : "memory");
+
+  v->user_data = user_data;
+}
+
+
+/**
+ * Flags and structures for @ref netio_get() and @ref netio_set().
+ * @ingroup config
+ */
+
+/** @{ */
+/** Parameter class; addr is a NETIO_PARAM_xxx value. */
+#define NETIO_PARAM       0
+/** Interface MAC address. This address is only valid with @ref netio_get().
+ *  The value is a 6-byte MAC address.  Depending upon the overall system
+ *  design, a MAC address may or may not be available for each interface. */
+#define NETIO_PARAM_MAC        0
+
+/** Determine whether to suspend output on the receipt of pause frames.
+ *  If the value is nonzero, the I/O shim will suspend output when a pause
+ *  frame is received.  If the value is zero, pause frames will be ignored. */
+#define NETIO_PARAM_PAUSE_IN   1
+
+/** Determine whether to send pause frames if the I/O shim packet FIFOs are
+ *  nearly full.  If the value is zero, pause frames are not sent.  If
+ *  the value is nonzero, it is the delay value which will be sent in any
+ *  pause frames which are output, in units of 512 bit times. */
+#define NETIO_PARAM_PAUSE_OUT  2
+
+/** Jumbo frame support.  The value is a 4-byte integer.  If the value is
+ *  nonzero, the MAC will accept frames of up to 10240 bytes.  If the value
+ *  is zero, the MAC will only accept frames of up to 1544 bytes. */
+#define NETIO_PARAM_JUMBO      3
+
+/** I/O shim's overflow statistics register.  The value is two 16-bit integers.
+ *  The first 16-bit value (or the low 16 bits, if the value is treated as a
+ *  32-bit number) is the count of packets which were completely dropped and
+ *  not delivered by the shim.  The second 16-bit value (or the high 16 bits,
+ *  if the value is treated as a 32-bit number) is the count of packets
+ *  which were truncated and thus only partially delivered by the shim.  This
+ *  register is automatically reset to zero after it has been read.
+ */
+#define NETIO_PARAM_OVERFLOW   4
+
+/** IPP statistics.  This address is only valid with @ref netio_get().  The
+ *  value is a netio_stat_t structure.  Unlike the I/O shim statistics, the
+ *  IPP statistics are not all reset to zero on read; see the description
+ *  of the netio_stat_t for details. */
+#define NETIO_PARAM_STAT 5
+
+/** Possible link state.  The value is a combination of "NETIO_LINK_xxx"
+ *  flags.  With @ref netio_get(), this will indicate which flags are
+ *  actually supported by the hardware.
+ *
+ *  For historical reasons, specifying this value to netio_set() will have
+ *  the same behavior as using ::NETIO_PARAM_LINK_CONFIG, but this usage is
+ *  discouraged.
+ */
+#define NETIO_PARAM_LINK_POSSIBLE_STATE 6
+
+/** Link configuration. The value is a combination of "NETIO_LINK_xxx" flags.
+ *  With @ref netio_set(), this will attempt to immediately bring up the
+ *  link using whichever of the requested flags are supported by the
+ *  hardware, or take down the link if the flags are zero; if this is
+ *  not possible, an error will be returned.  Many programs will want
+ *  to use ::NETIO_PARAM_LINK_DESIRED_STATE instead.
+ *
+ *  For historical reasons, specifying this value to netio_get() will
+ *  have the same behavior as using ::NETIO_PARAM_LINK_POSSIBLE_STATE,
+ *  but this usage is discouraged.
+ */
+#define NETIO_PARAM_LINK_CONFIG NETIO_PARAM_LINK_POSSIBLE_STATE
+
+/** Current link state. This address is only valid with @ref netio_get().
+ *  The value is zero or more of the "NETIO_LINK_xxx" flags, ORed together.
+ *  If the link is down, the value ANDed with NETIO_LINK_SPEED will be
+ *  zero; if the link is up, the value ANDed with NETIO_LINK_SPEED will
+ *  result in exactly one of the NETIO_LINK_xxx values, indicating the
+ *  current speed. */
+#define NETIO_PARAM_LINK_CURRENT_STATE 7
+
+/** Variant symbol for current state, retained for compatibility with
+ *  pre-MDE-2.1 programs. */
+#define NETIO_PARAM_LINK_STATUS NETIO_PARAM_LINK_CURRENT_STATE
+
+/** Packet Coherence protocol. This address is only valid with @ref netio_get().
+ *  The value is nonzero if the interface is configured for cache-coherent DMA.
+ */
+#define NETIO_PARAM_COHERENT 8
+
+/** Desired link state. The value is a conbination of "NETIO_LINK_xxx"
+ *  flags, which specify the desired state for the link.  With @ref
+ *  netio_set(), this will, in the background, attempt to bring up the link
+ *  using whichever of the requested flags are reasonable, or take down the
+ *  link if the flags are zero.  The actual link up or down operation may
+ *  happen after this call completes.  If the link state changes in the
+ *  future, the system will continue to try to get back to the desired link
+ *  state; for instance, if the link is brought up successfully, and then
+ *  the network cable is disconnected, the link will go down.  However, the
+ *  desired state of the link is still up, so if the cable is reconnected,
+ *  the link will be brought up again.
+ *
+ *  With @ref netio_get(), this will indicate the desired state for the
+ *  link, as set with a previous netio_set() call, or implicitly by a
+ *  netio_input_register() or netio_input_unregister() operation.  This may
+ *  not reflect the current state of the link; to get that, use
+ *  ::NETIO_PARAM_LINK_CURRENT_STATE. */
+#define NETIO_PARAM_LINK_DESIRED_STATE 9
+
+/** NetIO statistics structure.  Retrieved using the ::NETIO_PARAM_STAT
+ *  address passed to @ref netio_get(). */
+typedef struct
+{
+  /** Number of packets which have been received by the IPP and forwarded
+   *  to a tile's receive queue for processing.  This value wraps at its
+   *  maximum, and is not cleared upon read. */
+  uint32_t packets_received;
+
+  /** Number of packets which have been dropped by the IPP, because they could
+   *  not be received, or could not be forwarded to a tile.  The former happens
+   *  when the IPP does not have a free packet buffer of suitable size for an
+   *  incoming frame.  The latter happens when all potential destination tiles
+   *  for a packet, as defined by the group, bucket, and queue configuration,
+   *  have full receive queues.   This value wraps at its maximum, and is not
+   *  cleared upon read. */
+  uint32_t packets_dropped;
+
+  /*
+   * Note: the #defines after each of the following four one-byte values
+   * denote their location within the third word of the netio_stat_t.  They
+   * are intended for use only by the IPP implementation and are thus omitted
+   * from the Doxygen output.
+   */
+
+  /** Number of packets dropped because no worker was able to accept a new
+   *  packet.  This value saturates at its maximum, and is cleared upon
+   *  read. */
+  uint8_t drops_no_worker;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_WORKER   0
+#endif
+
+  /** Number of packets dropped because no small buffers were available.
+   *  This value saturates at its maximum, and is cleared upon read. */
+  uint8_t drops_no_smallbuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_SMALLBUF 1
+#endif
+
+  /** Number of packets dropped because no large buffers were available.
+   *  This value saturates at its maximum, and is cleared upon read. */
+  uint8_t drops_no_largebuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_LARGEBUF 2
+#endif
+
+  /** Number of packets dropped because no jumbo buffers were available.
+   *  This value saturates at its maximum, and is cleared upon read. */
+  uint8_t drops_no_jumbobuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_JUMBOBUF 3
+#endif
+}
+netio_stat_t;
+
+
+/** Link can run, should run, or is running at 10 Mbps. */
+#define NETIO_LINK_10M         0x01
+
+/** Link can run, should run, or is running at 100 Mbps. */
+#define NETIO_LINK_100M        0x02
+
+/** Link can run, should run, or is running at 1 Gbps. */
+#define NETIO_LINK_1G          0x04
+
+/** Link can run, should run, or is running at 10 Gbps. */
+#define NETIO_LINK_10G         0x08
+
+/** Link should run at the highest speed supported by the link and by
+ *  the device connected to the link.  Only usable as a value for
+ *  the link's desired state; never returned as a value for the current
+ *  or possible states. */
+#define NETIO_LINK_ANYSPEED    0x10
+
+/** All legal link speeds. */
+#define NETIO_LINK_SPEED  (NETIO_LINK_10M  | \
+                           NETIO_LINK_100M | \
+                           NETIO_LINK_1G   | \
+                           NETIO_LINK_10G  | \
+                           NETIO_LINK_ANYSPEED)
+
+
+/** MAC register class.  Addr is a register offset within the MAC.
+ *  Registers within the XGbE and GbE MACs are documented in the Tile
+ *  Processor I/O Device Guide (UG104). MAC registers start at address
+ *  0x4000, and do not include the MAC_INTERFACE registers. */
+#define NETIO_MAC             1
+
+/** MDIO register class (IEEE 802.3 clause 22 format).  Addr is the "addr"
+ *  member of a netio_mdio_addr_t structure. */
+#define NETIO_MDIO            2
+
+/** MDIO register class (IEEE 802.3 clause 45 format).  Addr is the "addr"
+ *  member of a netio_mdio_addr_t structure. */
+#define NETIO_MDIO_CLAUSE45   3
+
+/** NetIO MDIO address type.  Retrieved or provided using the ::NETIO_MDIO
+ *  address passed to @ref netio_get() or @ref netio_set(). */
+typedef union
+{
+  struct
+  {
+    unsigned int reg:16;  /**< MDIO register offset.  For clause 22 access,
+                               must be less than 32. */
+    unsigned int phy:5;   /**< Which MDIO PHY to access. */
+    unsigned int dev:5;   /**< Which MDIO device to access within that PHY.
+                               Applicable for clause 45 access only; ignored
+                               for clause 22 access. */
+  }
+  bits;                   /**< Container for bitfields. */
+  uint64_t addr;          /**< Value to pass to @ref netio_get() or
+                           *   @ref netio_set(). */
+}
+netio_mdio_addr_t;
+
+/** @} */
+
+#endif /* __NETIO_INTF_H__ */
diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile
index 112b1e2..b4c8e8e 100644
--- a/arch/tile/kernel/Makefile
+++ b/arch/tile/kernel/Makefile
@@ -15,3 +15,4 @@
 obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_PCI)		+= pci.o
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
new file mode 100644
index 0000000..a1ee25b
--- /dev/null
+++ b/arch/tile/kernel/pci.c
@@ -0,0 +1,621 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/byteorder.h>
+#include <asm/hv_driver.h>
+#include <hv/drv_pcie_rc_intf.h>
+
+
+/*
+ * Initialization flow and process
+ * -------------------------------
+ *
+ * This files containes the routines to search for PCI buses,
+ * enumerate the buses, and configure any attached devices.
+ *
+ * There are two entry points here:
+ * 1) tile_pci_init
+ *    This sets up the pci_controller structs, and opens the
+ *    FDs to the hypervisor.  This is called from setup_arch() early
+ *    in the boot process.
+ * 2) pcibios_init
+ *    This probes the PCI bus(es) for any attached hardware.  It's
+ *    called by subsys_initcall.  All of the real work is done by the
+ *    generic Linux PCI layer.
+ *
+ */
+
+/*
+ * This flag tells if the platform is TILEmpower that needs
+ * special configuration for the PLX switch chip.
+ */
+int __write_once tile_plx_gen1;
+
+static struct pci_controller controllers[TILE_NUM_PCIE];
+static int num_controllers;
+
+static struct pci_ops tile_cfg_ops;
+
+
+/*
+ * We don't need to worry about the alignment of resources.
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+			    resource_size_t size, resource_size_t align)
+{
+	return res->start;
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Open a FD to the hypervisor PCI device.
+ *
+ * controller_id is the controller number, config type is 0 or 1 for
+ * config0 or config1 operations.
+ */
+static int __init tile_pcie_open(int controller_id, int config_type)
+{
+	char filename[32];
+	int fd;
+
+	sprintf(filename, "pcie/%d/config%d", controller_id, config_type);
+
+	fd = hv_dev_open((HV_VirtAddr)filename, 0);
+
+	return fd;
+}
+
+
+/*
+ * Get the IRQ numbers from the HV and set up the handlers for them.
+ */
+static int __init tile_init_irqs(int controller_id,
+				 struct pci_controller *controller)
+{
+	char filename[32];
+	int fd;
+	int ret;
+	int x;
+	struct pcie_rc_config rc_config;
+
+	sprintf(filename, "pcie/%d/ctl", controller_id);
+	fd = hv_dev_open((HV_VirtAddr)filename, 0);
+	if (fd < 0) {
+		pr_err("PCI: hv_dev_open(%s) failed\n", filename);
+		return -1;
+	}
+	ret = hv_dev_pread(fd, 0, (HV_VirtAddr)(&rc_config),
+			   sizeof(rc_config), PCIE_RC_CONFIG_MASK_OFF);
+	hv_dev_close(fd);
+	if (ret != sizeof(rc_config)) {
+		pr_err("PCI: wanted %zd bytes, got %d\n",
+		       sizeof(rc_config), ret);
+		return -1;
+	}
+	/* Record irq_base so that we can map INTx to IRQ # later. */
+	controller->irq_base = rc_config.intr;
+
+	for (x = 0; x < 4; x++)
+		tile_irq_activate(rc_config.intr + x,
+				  TILE_IRQ_HW_CLEAR);
+
+	if (rc_config.plx_gen1)
+		controller->plx_gen1 = 1;
+
+	return 0;
+}
+
+/*
+ * First initialization entry point, called from setup_arch().
+ *
+ * Find valid controllers and fill in pci_controller structs for each
+ * of them.
+ *
+ * Returns the number of controllers discovered.
+ */
+int __init tile_pci_init(void)
+{
+	int i;
+
+	pr_info("PCI: Searching for controllers...\n");
+
+	/* Do any configuration we need before using the PCIe */
+
+	for (i = 0; i < TILE_NUM_PCIE; i++) {
+		int hv_cfg_fd0 = -1;
+		int hv_cfg_fd1 = -1;
+		int hv_mem_fd = -1;
+		char name[32];
+		struct pci_controller *controller;
+
+		/*
+		 * Open the fd to the HV.  If it fails then this
+		 * device doesn't exist.
+		 */
+		hv_cfg_fd0 = tile_pcie_open(i, 0);
+		if (hv_cfg_fd0 < 0)
+			continue;
+		hv_cfg_fd1 = tile_pcie_open(i, 1);
+		if (hv_cfg_fd1 < 0) {
+			pr_err("PCI: Couldn't open config fd to HV "
+			    "for controller %d\n", i);
+			goto err_cont;
+		}
+
+		sprintf(name, "pcie/%d/mem", i);
+		hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0);
+		if (hv_mem_fd < 0) {
+			pr_err("PCI: Could not open mem fd to HV!\n");
+			goto err_cont;
+		}
+
+		pr_info("PCI: Found PCI controller #%d\n", i);
+
+		controller = &controllers[num_controllers];
+
+		if (tile_init_irqs(i, controller)) {
+			pr_err("PCI: Could not initialize "
+			       "IRQs, aborting.\n");
+			goto err_cont;
+		}
+
+		controller->index = num_controllers;
+		controller->hv_cfg_fd[0] = hv_cfg_fd0;
+		controller->hv_cfg_fd[1] = hv_cfg_fd1;
+		controller->hv_mem_fd = hv_mem_fd;
+		controller->first_busno = 0;
+		controller->last_busno = 0xff;
+		controller->ops = &tile_cfg_ops;
+
+		num_controllers++;
+		continue;
+
+err_cont:
+		if (hv_cfg_fd0 >= 0)
+			hv_dev_close(hv_cfg_fd0);
+		if (hv_cfg_fd1 >= 0)
+			hv_dev_close(hv_cfg_fd1);
+		if (hv_mem_fd >= 0)
+			hv_dev_close(hv_mem_fd);
+		continue;
+	}
+
+	/*
+	 * Before using the PCIe, see if we need to do any platform-specific
+	 * configuration, such as the PLX switch Gen 1 issue on TILEmpower.
+	 */
+	for (i = 0; i < num_controllers; i++) {
+		struct pci_controller *controller = &controllers[i];
+
+		if (controller->plx_gen1)
+			tile_plx_gen1 = 1;
+	}
+
+	return num_controllers;
+}
+
+/*
+ * (pin - 1) converts from the PCI standard's [1:4] convention to
+ * a normal [0:3] range.
+ */
+static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct pci_controller *controller =
+		(struct pci_controller *)dev->sysdata;
+	return (pin - 1) + controller->irq_base;
+}
+
+
+static void __init fixup_read_and_payload_sizes(void)
+{
+	struct pci_dev *dev = NULL;
+	int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */
+	int max_read_size = 0x2; /* Limit to 512 byte reads. */
+	u16 new_values;
+
+	/* Scan for the smallest maximum payload size. */
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		int pcie_caps_offset;
+		u32 devcap;
+		int max_payload;
+
+		pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
+		if (pcie_caps_offset == 0)
+			continue;
+
+		pci_read_config_dword(dev, pcie_caps_offset + PCI_EXP_DEVCAP,
+				      &devcap);
+		max_payload = devcap & PCI_EXP_DEVCAP_PAYLOAD;
+		if (max_payload < smallest_max_payload)
+			smallest_max_payload = max_payload;
+	}
+
+	/* Now, set the max_payload_size for all devices to that value. */
+	new_values = (max_read_size << 12) | (smallest_max_payload << 5);
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		int pcie_caps_offset;
+		u16 devctl;
+
+		pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
+		if (pcie_caps_offset == 0)
+			continue;
+
+		pci_read_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
+				     &devctl);
+		devctl &= ~(PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ);
+		devctl |= new_values;
+		pci_write_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
+				      devctl);
+	}
+}
+
+
+/*
+ * Second PCI initialization entry point, called by subsys_initcall.
+ *
+ * The controllers have been set up by the time we get here, by a call to
+ * tile_pci_init.
+ */
+static int __init pcibios_init(void)
+{
+	int i;
+
+	pr_info("PCI: Probing PCI hardware\n");
+
+	/*
+	 * Delay a bit in case devices aren't ready.  Some devices are
+	 * known to require at least 20ms here, but we use a more
+	 * conservative value.
+	 */
+	mdelay(250);
+
+	/* Scan all of the recorded PCI controllers.  */
+	for (i = 0; i < num_controllers; i++) {
+		struct pci_controller *controller = &controllers[i];
+		struct pci_bus *bus;
+
+		pr_info("PCI: initializing controller #%d\n", i);
+
+		/*
+		 * This comes from the generic Linux PCI driver.
+		 *
+		 * It reads the PCI tree for this bus into the Linux
+		 * data structures.
+		 *
+		 * This is inlined in linux/pci.h and calls into
+		 * pci_scan_bus_parented() in probe.c.
+		 */
+		bus = pci_scan_bus(0, controller->ops, controller);
+		controller->root_bus = bus;
+		controller->last_busno = bus->subordinate;
+
+	}
+
+	/* Do machine dependent PCI interrupt routing */
+	pci_fixup_irqs(pci_common_swizzle, tile_map_irq);
+
+	/*
+	 * This comes from the generic Linux PCI driver.
+	 *
+	 * It allocates all of the resources (I/O memory, etc)
+	 * associated with the devices read in above.
+	 */
+
+	pci_assign_unassigned_resources();
+
+	/* Configure the max_read_size and max_payload_size values. */
+	fixup_read_and_payload_sizes();
+
+	/* Record the I/O resources in the PCI controller structure. */
+	for (i = 0; i < num_controllers; i++) {
+		struct pci_bus *root_bus = controllers[i].root_bus;
+		struct pci_bus *next_bus;
+		struct pci_dev *dev;
+
+		list_for_each_entry(dev, &root_bus->devices, bus_list) {
+			/* Find the PCI host controller, ie. the 1st bridge. */
+			if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
+				(PCI_SLOT(dev->devfn) == 0)) {
+				next_bus = dev->subordinate;
+				controllers[i].mem_resources[0] =
+					*next_bus->resource[0];
+				controllers[i].mem_resources[1] =
+					 *next_bus->resource[1];
+				controllers[i].mem_resources[2] =
+					 *next_bus->resource[2];
+
+				break;
+			}
+		}
+
+	}
+
+	return 0;
+}
+subsys_initcall(pcibios_init);
+
+/*
+ * No bus fixups needed.
+ */
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+	/* Nothing needs to be done. */
+}
+
+/*
+ * This can be called from the generic PCI layer, but doesn't need to
+ * do anything.
+ */
+char __devinit *pcibios_setup(char *str)
+{
+	/* Nothing needs to be done. */
+	return str;
+}
+
+/*
+ * This is called from the generic Linux layer.
+ */
+void __init pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+/*
+ * Enable memory and/or address decoding, as appropriate, for the
+ * device described by the 'dev' struct.
+ *
+ * This is called from the generic PCI layer, and can be called
+ * for bridges or endpoints.
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	u8 header_type;
+	int i;
+	struct resource *r;
+
+	pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+		/*
+		 * For bridges, we enable both memory and I/O decoding
+		 * in call cases.
+		 */
+		cmd |= PCI_COMMAND_IO;
+		cmd |= PCI_COMMAND_MEMORY;
+	} else {
+		/*
+		 * For endpoints, we enable memory and/or I/O decoding
+		 * only if they have a memory resource of that type.
+		 */
+		for (i = 0; i < 6; i++) {
+			r = &dev->resource[i];
+			if (r->flags & IORESOURCE_UNSET) {
+				pr_err("PCI: Device %s not available "
+				       "because of resource collisions\n",
+				       pci_name(dev));
+				return -EINVAL;
+			}
+			if (r->flags & IORESOURCE_IO)
+				cmd |= PCI_COMMAND_IO;
+			if (r->flags & IORESOURCE_MEM)
+				cmd |= PCI_COMMAND_MEMORY;
+		}
+	}
+
+	/*
+	 * We only write the command if it changed.
+	 */
+	if (cmd != old_cmd)
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	return 0;
+}
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+	unsigned long start = pci_resource_start(dev, bar);
+	unsigned long len = pci_resource_len(dev, bar);
+	unsigned long flags = pci_resource_flags(dev, bar);
+
+	if (!len)
+		return NULL;
+	if (max && len > max)
+		len = max;
+
+	if (!(flags & IORESOURCE_MEM)) {
+		pr_info("PCI: Trying to map invalid resource %#lx\n", flags);
+		start = 0;
+	}
+
+	return (void __iomem *)start;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+
+/****************************************************************
+ *
+ * Tile PCI config space read/write routines
+ *
+ ****************************************************************/
+
+/*
+ * These are the normal read and write ops
+ * These are expanded with macros from  pci_bus_read_config_byte() etc.
+ *
+ * devfn is the combined PCI slot & function.
+ *
+ * offset is in bytes, from the start of config space for the
+ * specified bus & slot.
+ */
+
+static int __devinit tile_cfg_read(struct pci_bus *bus,
+				   unsigned int devfn,
+				   int offset,
+				   int size,
+				   u32 *val)
+{
+	struct pci_controller *controller = bus->sysdata;
+	int busnum = bus->number & 0xff;
+	int slot = (devfn >> 3) & 0x1f;
+	int function = devfn & 0x7;
+	u32 addr;
+	int config_mode = 1;
+
+	/*
+	 * There is no bridge between the Tile and bus 0, so we
+	 * use config0 to talk to bus 0.
+	 *
+	 * If we're talking to a bus other than zero then we
+	 * must have found a bridge.
+	 */
+	if (busnum == 0) {
+		/*
+		 * We fake an empty slot for (busnum == 0) && (slot > 0),
+		 * since there is only one slot on bus 0.
+		 */
+		if (slot) {
+			*val = 0xFFFFFFFF;
+			return 0;
+		}
+		config_mode = 0;
+	}
+
+	addr = busnum << 20;		/* Bus in 27:20 */
+	addr |= slot << 15;		/* Slot (device) in 19:15 */
+	addr |= function << 12;		/* Function is in 14:12 */
+	addr |= (offset & 0xFFF);	/* byte address in 0:11 */
+
+	return hv_dev_pread(controller->hv_cfg_fd[config_mode], 0,
+			    (HV_VirtAddr)(val), size, addr);
+}
+
+
+/*
+ * See tile_cfg_read() for relevent comments.
+ * Note that "val" is the value to write, not a pointer to that value.
+ */
+static int __devinit tile_cfg_write(struct pci_bus *bus,
+				    unsigned int devfn,
+				    int offset,
+				    int size,
+				    u32 val)
+{
+	struct pci_controller *controller = bus->sysdata;
+	int busnum = bus->number & 0xff;
+	int slot = (devfn >> 3) & 0x1f;
+	int function = devfn & 0x7;
+	u32 addr;
+	int config_mode = 1;
+	HV_VirtAddr valp = (HV_VirtAddr)&val;
+
+	/*
+	 * For bus 0 slot 0 we use config 0 accesses.
+	 */
+	if (busnum == 0) {
+		/*
+		 * We fake an empty slot for (busnum == 0) && (slot > 0),
+		 * since there is only one slot on bus 0.
+		 */
+		if (slot)
+			return 0;
+		config_mode = 0;
+	}
+
+	addr = busnum << 20;		/* Bus in 27:20 */
+	addr |= slot << 15;		/* Slot (device) in 19:15 */
+	addr |= function << 12;		/* Function is in 14:12 */
+	addr |= (offset & 0xFFF);	/* byte address in 0:11 */
+
+#ifdef __BIG_ENDIAN
+	/* Point to the correct part of the 32-bit "val". */
+	valp += 4 - size;
+#endif
+
+	return hv_dev_pwrite(controller->hv_cfg_fd[config_mode], 0,
+			     valp, size, addr);
+}
+
+
+static struct pci_ops tile_cfg_ops = {
+	.read =         tile_cfg_read,
+	.write =        tile_cfg_write,
+};
+
+
+/*
+ * In the following, each PCI controller's mem_resources[1]
+ * represents its (non-prefetchable) PCI memory resource.
+ * mem_resources[0] and mem_resources[2] refer to its PCI I/O and
+ * prefetchable PCI memory resources, respectively.
+ * For more details, see pci_setup_bridge() in setup-bus.c.
+ * By comparing the target PCI memory address against the
+ * end address of controller 0, we can determine the controller
+ * that should accept the PCI memory access.
+ */
+#define TILE_READ(size, type)						\
+type _tile_read##size(unsigned long addr)				\
+{									\
+	type val;							\
+	int idx = 0;							\
+	if (addr > controllers[0].mem_resources[1].end &&		\
+	    addr > controllers[0].mem_resources[2].end)			\
+		idx = 1;                                                \
+	if (hv_dev_pread(controllers[idx].hv_mem_fd, 0,			\
+			 (HV_VirtAddr)(&val), sizeof(type), addr))	\
+		pr_err("PCI: read %zd bytes at 0x%lX failed\n",		\
+		       sizeof(type), addr);				\
+	return val;							\
+}									\
+EXPORT_SYMBOL(_tile_read##size)
+
+TILE_READ(b, u8);
+TILE_READ(w, u16);
+TILE_READ(l, u32);
+TILE_READ(q, u64);
+
+#define TILE_WRITE(size, type)						\
+void _tile_write##size(type val, unsigned long addr)			\
+{									\
+	int idx = 0;							\
+	if (addr > controllers[0].mem_resources[1].end &&		\
+	    addr > controllers[0].mem_resources[2].end)			\
+		idx = 1;                                                \
+	if (hv_dev_pwrite(controllers[idx].hv_mem_fd, 0,		\
+			  (HV_VirtAddr)(&val), sizeof(type), addr))	\
+		pr_err("PCI: write %zd bytes at 0x%lX failed\n",	\
+		       sizeof(type), addr);				\
+}									\
+EXPORT_SYMBOL(_tile_write##size)
+
+TILE_WRITE(b, u8);
+TILE_WRITE(w, u16);
+TILE_WRITE(l, u32);
+TILE_WRITE(q, u64);
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index fb0b3cb..f185736 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -840,7 +840,7 @@
 	for_each_online_node(i)
 		register_one_node(i);
 
-	for_each_present_cpu(i)
+	for (i = 0; i < smp_height * smp_width; ++i)
 		register_cpu(&cpu_devices[i], i);
 
 	return 0;
diff --git a/arch/tile/lib/memchr_32.c b/arch/tile/lib/memchr_32.c
index 6235283..cc3d9ba 100644
--- a/arch/tile/lib/memchr_32.c
+++ b/arch/tile/lib/memchr_32.c
@@ -18,12 +18,24 @@
 
 void *memchr(const void *s, int c, size_t n)
 {
+	const uint32_t *last_word_ptr;
+	const uint32_t *p;
+	const char *last_byte_ptr;
+	uintptr_t s_int;
+	uint32_t goal, before_mask, v, bits;
+	char *ret;
+
+	if (__builtin_expect(n == 0, 0)) {
+		/* Don't dereference any memory if the array is empty. */
+		return NULL;
+	}
+
 	/* Get an aligned pointer. */
-	const uintptr_t s_int = (uintptr_t) s;
-	const uint32_t *p = (const uint32_t *)(s_int & -4);
+	s_int = (uintptr_t) s;
+	p = (const uint32_t *)(s_int & -4);
 
 	/* Create four copies of the byte for which we are looking. */
-	const uint32_t goal = 0x01010101 * (uint8_t) c;
+	goal = 0x01010101 * (uint8_t) c;
 
 	/* Read the first word, but munge it so that bytes before the array
 	 * will not match goal.
@@ -31,23 +43,14 @@
 	 * Note that this shift count expression works because we know
 	 * shift counts are taken mod 32.
 	 */
-	const uint32_t before_mask = (1 << (s_int << 3)) - 1;
-	uint32_t v = (*p | before_mask) ^ (goal & before_mask);
+	before_mask = (1 << (s_int << 3)) - 1;
+	v = (*p | before_mask) ^ (goal & before_mask);
 
 	/* Compute the address of the last byte. */
-	const char *const last_byte_ptr = (const char *)s + n - 1;
+	last_byte_ptr = (const char *)s + n - 1;
 
 	/* Compute the address of the word containing the last byte. */
-	const uint32_t *const last_word_ptr =
-	    (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
-
-	uint32_t bits;
-	char *ret;
-
-	if (__builtin_expect(n == 0, 0)) {
-		/* Don't dereference any memory if the array is empty. */
-		return NULL;
-	}
+	last_word_ptr = (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
 
 	while ((bits = __insn_seqb(v, goal)) == 0) {
 		if (__builtin_expect(p == last_word_ptr, 0)) {
diff --git a/arch/tile/lib/spinlock_32.c b/arch/tile/lib/spinlock_32.c
index 485e24d..5cd1c40 100644
--- a/arch/tile/lib/spinlock_32.c
+++ b/arch/tile/lib/spinlock_32.c
@@ -167,23 +167,30 @@
 	 * when we compare them.
 	 */
 	u32 my_ticket_;
-
-	/* Take out the next ticket; this will also stop would-be readers. */
-	if (val & 1)
-		val = get_rwlock(rwlock);
-	rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
-
-	/* Extract my ticket value from the original word. */
-	my_ticket_ = val >> WR_NEXT_SHIFT;
+	u32 iterations = 0;
 
 	/*
-	 * Wait until the "current" field matches our ticket, and
-	 * there are no remaining readers.
+	 * Wait until there are no readers, then bump up the next
+	 * field and capture the ticket value.
 	 */
 	for (;;) {
+		if (!(val & 1)) {
+			if ((val >> RD_COUNT_SHIFT) == 0)
+				break;
+			rwlock->lock = val;
+		}
+		delay_backoff(iterations++);
+		val = __insn_tns((int *)&rwlock->lock);
+	}
+
+	/* Take out the next ticket and extract my ticket value. */
+	rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
+	my_ticket_ = val >> WR_NEXT_SHIFT;
+
+	/* Wait until the "current" field matches our ticket. */
+	for (;;) {
 		u32 curr_ = val >> WR_CURR_SHIFT;
-		u32 readers = val >> RD_COUNT_SHIFT;
-		u32 delta = ((my_ticket_ - curr_) & WR_MASK) + !!readers;
+		u32 delta = ((my_ticket_ - curr_) & WR_MASK);
 		if (likely(delta == 0))
 			break;
 
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 7f7338c..1664cce 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -727,6 +727,9 @@
 
 static void free_winch(struct winch *winch, int free_irq_ok)
 {
+	if (free_irq_ok)
+		free_irq(WINCH_IRQ, winch);
+
 	list_del(&winch->list);
 
 	if (winch->pid != -1)
@@ -735,8 +738,6 @@
 		os_close_file(winch->fd);
 	if (winch->stack != 0)
 		free_stack(winch->stack, 0);
-	if (free_irq_ok)
-		free_irq(WINCH_IRQ, winch);
 	kfree(winch);
 }
 
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 4d293dc..9479a03 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -216,8 +216,8 @@
 }
 
 /* Return an pointer with offset calculated */
-static inline unsigned long __set_fixmap_offset(enum fixed_addresses idx,
-				phys_addr_t phys, pgprot_t flags)
+static __always_inline unsigned long
+__set_fixmap_offset(enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
 {
 	__set_fixmap(idx, phys, flags);
 	return fix_to_virt(idx) + (phys & (PAGE_SIZE - 1));
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 3ea3dc4..6b89f5e 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -128,7 +128,7 @@
 #define FAM10H_MMIO_CONF_ENABLE		(1<<0)
 #define FAM10H_MMIO_CONF_BUSRANGE_MASK	0xf
 #define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2
-#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffff
+#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffffULL
 #define FAM10H_MMIO_CONF_BASE_SHIFT	20
 #define MSR_FAM10H_NODE_ID		0xc001100c
 
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 18e3b8a..ef99758 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -824,27 +824,27 @@
 #define __PV_IS_CALLEE_SAVE(func)			\
 	((struct paravirt_callee_save) { func })
 
-static inline unsigned long arch_local_save_flags(void)
+static inline notrace unsigned long arch_local_save_flags(void)
 {
 	return PVOP_CALLEE0(unsigned long, pv_irq_ops.save_fl);
 }
 
-static inline void arch_local_irq_restore(unsigned long f)
+static inline notrace void arch_local_irq_restore(unsigned long f)
 {
 	PVOP_VCALLEE1(pv_irq_ops.restore_fl, f);
 }
 
-static inline void arch_local_irq_disable(void)
+static inline notrace void arch_local_irq_disable(void)
 {
 	PVOP_VCALLEE0(pv_irq_ops.irq_disable);
 }
 
-static inline void arch_local_irq_enable(void)
+static inline notrace void arch_local_irq_enable(void)
 {
 	PVOP_VCALLEE0(pv_irq_ops.irq_enable);
 }
 
-static inline unsigned long arch_local_irq_save(void)
+static inline notrace unsigned long arch_local_irq_save(void)
 {
 	unsigned long f;
 
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index e969f69..a501741 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -199,6 +199,8 @@
 #define UVH_APICID		0x002D0E00L
 #define UV_APIC_PNODE_SHIFT	6
 
+#define UV_APICID_HIBIT_MASK	0xffff0000
+
 /* Local Bus from cpu's perspective */
 #define LOCAL_BUS_BASE		0x1c00000
 #define LOCAL_BUS_SIZE		(4 * 1024 * 1024)
@@ -491,8 +493,10 @@
 	}
 }
 
+extern unsigned int uv_apicid_hibits;
 static unsigned long uv_hub_ipi_value(int apicid, int vector, int mode)
 {
+	apicid |= uv_apicid_hibits;
 	return (1UL << UVH_IPI_INT_SEND_SHFT) |
 			((apicid) << UVH_IPI_INT_APIC_ID_SHFT) |
 			(mode << UVH_IPI_INT_DELIVERY_MODE_SHFT) |
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index 6d90adf..20cafea 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -5,7 +5,7 @@
  *
  * SGI UV MMR definitions
  *
- * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Silicon Graphics, Inc. All rights reserved.
  */
 
 #ifndef _ASM_X86_UV_UV_MMRS_H
@@ -754,6 +754,23 @@
 };
 
 /* ========================================================================= */
+/*                   UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK                     */
+/* ========================================================================= */
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK 0x320130UL
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_32 0x009f0
+
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_SHFT 0
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_MASK 0x00000000ffffffffUL
+
+union uvh_lb_target_physical_apic_id_mask_u {
+	unsigned long v;
+	struct uvh_lb_target_physical_apic_id_mask_s {
+		unsigned long bit_enables : 32;  /* RW */
+		unsigned long rsvd_32_63  : 32;  /*    */
+	} s;
+};
+
+/* ========================================================================= */
 /*                               UVH_NODE_ID                                 */
 /* ========================================================================= */
 #define UVH_NODE_ID 0x0UL
diff --git a/arch/x86/include/asm/xen/interface.h b/arch/x86/include/asm/xen/interface.h
index e8506c1..1c10c88 100644
--- a/arch/x86/include/asm/xen/interface.h
+++ b/arch/x86/include/asm/xen/interface.h
@@ -61,9 +61,9 @@
 #define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
 #endif
 
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
+#define MACH2PHYS_VIRT_START  mk_unsigned_long(__MACH2PHYS_VIRT_START)
+#define MACH2PHYS_VIRT_END    mk_unsigned_long(__MACH2PHYS_VIRT_END)
+#define MACH2PHYS_NR_ENTRIES  ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>__MACH2PHYS_SHIFT)
 
 /* Maximum number of virtual CPUs in multi-processor guests. */
 #define MAX_VIRT_CPUS 32
diff --git a/arch/x86/include/asm/xen/interface_32.h b/arch/x86/include/asm/xen/interface_32.h
index 42a7e00..8413688 100644
--- a/arch/x86/include/asm/xen/interface_32.h
+++ b/arch/x86/include/asm/xen/interface_32.h
@@ -32,6 +32,11 @@
 /* And the trap vector is... */
 #define TRAP_INSTR "int $0x82"
 
+#define __MACH2PHYS_VIRT_START 0xF5800000
+#define __MACH2PHYS_VIRT_END   0xF6800000
+
+#define __MACH2PHYS_SHIFT      2
+
 /*
  * Virtual addresses beyond this are not modifiable by guest OSes. The
  * machine->physical mapping table starts at this address, read-only.
diff --git a/arch/x86/include/asm/xen/interface_64.h b/arch/x86/include/asm/xen/interface_64.h
index 100d266..839a481 100644
--- a/arch/x86/include/asm/xen/interface_64.h
+++ b/arch/x86/include/asm/xen/interface_64.h
@@ -39,18 +39,7 @@
 #define __HYPERVISOR_VIRT_END   0xFFFF880000000000
 #define __MACH2PHYS_VIRT_START  0xFFFF800000000000
 #define __MACH2PHYS_VIRT_END    0xFFFF804000000000
-
-#ifndef HYPERVISOR_VIRT_START
-#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
-#define HYPERVISOR_VIRT_END   mk_unsigned_long(__HYPERVISOR_VIRT_END)
-#endif
-
-#define MACH2PHYS_VIRT_START  mk_unsigned_long(__MACH2PHYS_VIRT_START)
-#define MACH2PHYS_VIRT_END    mk_unsigned_long(__MACH2PHYS_VIRT_END)
-#define MACH2PHYS_NR_ENTRIES  ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>3)
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
+#define __MACH2PHYS_SHIFT       3
 
 /*
  * int HYPERVISOR_set_segment_base(unsigned int which, unsigned long base)
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index dd8c141..8760cc6 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -5,6 +5,7 @@
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <linux/pfn.h>
+#include <linux/mm.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
@@ -35,6 +36,8 @@
 #define MAX_DOMAIN_PAGES						\
     ((unsigned long)((u64)CONFIG_XEN_MAX_DOMAIN_MEMORY * 1024 * 1024 * 1024 / PAGE_SIZE))
 
+extern unsigned long *machine_to_phys_mapping;
+extern unsigned int   machine_to_phys_order;
 
 extern unsigned long get_phys_to_machine(unsigned long pfn);
 extern bool set_phys_to_machine(unsigned long pfn, unsigned long mfn);
@@ -69,10 +72,8 @@
 	if (xen_feature(XENFEAT_auto_translated_physmap))
 		return mfn;
 
-#if 0
 	if (unlikely((mfn >> machine_to_phys_order) != 0))
-		return max_mapnr;
-#endif
+		return ~0;
 
 	pfn = 0;
 	/*
diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c
index cefd694..62f6e1e 100644
--- a/arch/x86/kernel/apic/hw_nmi.c
+++ b/arch/x86/kernel/apic/hw_nmi.c
@@ -17,15 +17,16 @@
 #include <linux/nmi.h>
 #include <linux/module.h>
 
-/* For reliability, we're prepared to waste bits here. */
-static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
-
 u64 hw_nmi_get_sample_period(void)
 {
 	return (u64)(cpu_khz) * 1000 * 60;
 }
 
 #ifdef ARCH_HAS_NMI_WATCHDOG
+
+/* For reliability, we're prepared to waste bits here. */
+static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
+
 void arch_trigger_all_cpu_backtrace(void)
 {
 	int i;
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 194539a..c1c52c3 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -44,6 +44,8 @@
 static union uvh_apicid uvh_apicid;
 int uv_min_hub_revision_id;
 EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
+unsigned int uv_apicid_hibits;
+EXPORT_SYMBOL_GPL(uv_apicid_hibits);
 static DEFINE_SPINLOCK(uv_nmi_lock);
 
 static inline bool is_GRU_range(u64 start, u64 end)
@@ -85,6 +87,23 @@
 		uvh_apicid.s.pnode_shift = UV_APIC_PNODE_SHIFT;
 }
 
+/*
+ * Add an extra bit as dictated by bios to the destination apicid of
+ * interrupts potentially passing through the UV HUB.  This prevents
+ * a deadlock between interrupts and IO port operations.
+ */
+static void __init uv_set_apicid_hibit(void)
+{
+	union uvh_lb_target_physical_apic_id_mask_u apicid_mask;
+	unsigned long *mmr;
+
+	mmr = early_ioremap(UV_LOCAL_MMR_BASE |
+		UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK, sizeof(*mmr));
+	apicid_mask.v = *mmr;
+	early_iounmap(mmr, sizeof(*mmr));
+	uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK;
+}
+
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	int nodeid;
@@ -102,6 +121,7 @@
 			__get_cpu_var(x2apic_extra_bits) =
 				nodeid << (uvh_apicid.s.pnode_shift - 1);
 			uv_system_type = UV_NON_UNIQUE_APIC;
+			uv_set_apicid_hibit();
 			return 1;
 		}
 	}
@@ -155,6 +175,7 @@
 	int pnode;
 
 	pnode = uv_apicid_to_pnode(phys_apicid);
+	phys_apicid |= uv_apicid_hibits;
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	    ((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
@@ -236,7 +257,7 @@
 	int cpu = cpumask_first(cpumask);
 
 	if ((unsigned)cpu < nr_cpu_ids)
-		return per_cpu(x86_cpu_to_apicid, cpu);
+		return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
 	else
 		return BAD_APICID;
 }
@@ -255,7 +276,7 @@
 		if (cpumask_test_cpu(cpu, cpu_online_mask))
 			break;
 	}
-	return per_cpu(x86_cpu_to_apicid, cpu);
+	return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
 }
 
 static unsigned int x2apic_get_apic_id(unsigned long x)
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 59e175e..591e601 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -395,7 +395,7 @@
 	 * A tiny bit of offset fixup is necessary - 4*4 means the 4 words
 	 * pushed above; +8 corresponds to copy_thread's esp0 setting.
 	 */
-	pushl_cfi (TI_sysenter_return-THREAD_SIZE_asm+8+4*4)(%esp)
+	pushl_cfi ((TI_sysenter_return)-THREAD_SIZE_asm+8+4*4)(%esp)
 	CFI_REL_OFFSET eip, 0
 
 	pushl_cfi %eax
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index fe2690d..e3ba417 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -295,6 +295,7 @@
 	.endm
 
 /* save partial stack frame */
+	.pushsection .kprobes.text, "ax"
 ENTRY(save_args)
 	XCPT_FRAME
 	cld
@@ -334,6 +335,7 @@
 	ret
 	CFI_ENDPROC
 END(save_args)
+	.popsection
 
 ENTRY(save_rest)
 	PARTIAL_FRAME 1 REST_SKIP+8
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index ff15c9d..42c5942 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -433,6 +433,10 @@
 	dr6_p = (unsigned long *)ERR_PTR(args->err);
 	dr6 = *dr6_p;
 
+	/* If it's a single step, TRAP bits are random */
+	if (dr6 & DR_STEP)
+		return NOTIFY_DONE;
+
 	/* Do an early return if no trap bits are set in DR6 */
 	if ((dr6 & DR_TRAP_BITS) == 0)
 		return NOTIFY_DONE;
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c
index 6da143c..ac861b8 100644
--- a/arch/x86/kernel/mmconf-fam10h_64.c
+++ b/arch/x86/kernel/mmconf-fam10h_64.c
@@ -25,7 +25,6 @@
 };
 
 static u64 __cpuinitdata fam10h_pci_mmconf_base;
-static int __cpuinitdata fam10h_pci_mmconf_base_status;
 
 static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = {
 	{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
@@ -44,10 +43,12 @@
 	return start1 - start2;
 }
 
-/*[47:0] */
-/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */
+#define MMCONF_UNIT (1ULL << FAM10H_MMIO_CONF_BASE_SHIFT)
+#define MMCONF_MASK (~(MMCONF_UNIT - 1))
+#define MMCONF_SIZE (MMCONF_UNIT << 8)
+/* need to avoid (0xfd<<32), (0xfe<<32), and (0xff<<32), ht used space */
 #define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32)
-#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32)))
+#define BASE_VALID(b) ((b) + MMCONF_SIZE <= (0xfdULL<<32) || (b) >= (1ULL<<40))
 static void __cpuinit get_fam10h_pci_mmconf_base(void)
 {
 	int i;
@@ -64,12 +65,11 @@
 	struct range range[8];
 
 	/* only try to get setting from BSP */
-	/* -1 or 1 */
-	if (fam10h_pci_mmconf_base_status)
+	if (fam10h_pci_mmconf_base)
 		return;
 
 	if (!early_pci_allowed())
-		goto fail;
+		return;
 
 	found = 0;
 	for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
@@ -91,7 +91,7 @@
 	}
 
 	if (!found)
-		goto fail;
+		return;
 
 	/* SYS_CFG */
 	address = MSR_K8_SYSCFG;
@@ -99,16 +99,16 @@
 
 	/* TOP_MEM2 is not enabled? */
 	if (!(val & (1<<21))) {
-		tom2 = 0;
+		tom2 = 1ULL << 32;
 	} else {
 		/* TOP_MEM2 */
 		address = MSR_K8_TOP_MEM2;
 		rdmsrl(address, val);
-		tom2 = val & (0xffffULL<<32);
+		tom2 = max(val & 0xffffff800000ULL, 1ULL << 32);
 	}
 
 	if (base <= tom2)
-		base = tom2 + (1ULL<<32);
+		base = (tom2 + 2 * MMCONF_UNIT - 1) & MMCONF_MASK;
 
 	/*
 	 * need to check if the range is in the high mmio range that is
@@ -123,11 +123,11 @@
 		if (!(reg & 3))
 			continue;
 
-		start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
+		start = (u64)(reg & 0xffffff00) << 8; /* 39:16 on 31:8*/
 		reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
-		end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
+		end = ((u64)(reg & 0xffffff00) << 8) | 0xffff; /* 39:16 on 31:8*/
 
-		if (!end)
+		if (end < tom2)
 			continue;
 
 		range[hi_mmio_num].start = start;
@@ -143,32 +143,27 @@
 
 	if (range[hi_mmio_num - 1].end < base)
 		goto out;
-	if (range[0].start > base)
+	if (range[0].start > base + MMCONF_SIZE)
 		goto out;
 
 	/* need to find one window */
-	base = range[0].start - (1ULL << 32);
+	base = (range[0].start & MMCONF_MASK) - MMCONF_UNIT;
 	if ((base > tom2) && BASE_VALID(base))
 		goto out;
-	base = range[hi_mmio_num - 1].end + (1ULL << 32);
-	if ((base > tom2) && BASE_VALID(base))
+	base = (range[hi_mmio_num - 1].end + MMCONF_UNIT) & MMCONF_MASK;
+	if (BASE_VALID(base))
 		goto out;
 	/* need to find window between ranges */
-	if (hi_mmio_num > 1)
-	for (i = 0; i < hi_mmio_num - 1; i++) {
-		if (range[i + 1].start > (range[i].end + (1ULL << 32))) {
-			base = range[i].end + (1ULL << 32);
-			if ((base > tom2) && BASE_VALID(base))
-				goto out;
-		}
+	for (i = 1; i < hi_mmio_num; i++) {
+		base = (range[i - 1].end + MMCONF_UNIT) & MMCONF_MASK;
+		val = range[i].start & MMCONF_MASK;
+		if (val >= base + MMCONF_SIZE && BASE_VALID(base))
+			goto out;
 	}
-
-fail:
-	fam10h_pci_mmconf_base_status = -1;
 	return;
+
 out:
 	fam10h_pci_mmconf_base = base;
-	fam10h_pci_mmconf_base_status = 1;
 }
 
 void __cpuinit fam10h_check_enable_mmcfg(void)
@@ -190,11 +185,10 @@
 
 		/* only trust the one handle 256 buses, if acpi=off */
 		if (!acpi_pci_disabled || busnbits >= 8) {
-			u64 base;
-			base = val & (0xffffULL << 32);
-			if (fam10h_pci_mmconf_base_status <= 0) {
+			u64 base = val & MMCONF_MASK;
+
+			if (!fam10h_pci_mmconf_base) {
 				fam10h_pci_mmconf_base = base;
-				fam10h_pci_mmconf_base_status = 1;
 				return;
 			} else if (fam10h_pci_mmconf_base ==  base)
 				return;
@@ -206,8 +200,10 @@
 	 * with 256 buses
 	 */
 	get_fam10h_pci_mmconf_base();
-	if (fam10h_pci_mmconf_base_status <= 0)
+	if (!fam10h_pci_mmconf_base) {
+		pci_probe &= ~PCI_CHECK_ENABLE_AMD_MMCONF;
 		return;
+	}
 
 	printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n");
 	val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) |
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 12cdbb1..6acc724 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -223,7 +223,7 @@
 
 static void __cpuinit calculate_tlb_offset(void)
 {
-	int cpu, node, nr_node_vecs;
+	int cpu, node, nr_node_vecs, idx = 0;
 	/*
 	 * we are changing tlb_vector_offset for each CPU in runtime, but this
 	 * will not cause inconsistency, as the write is atomic under X86. we
@@ -239,7 +239,7 @@
 		nr_node_vecs = NUM_INVALIDATE_TLB_VECTORS/nr_online_nodes;
 
 	for_each_online_node(node) {
-		int node_offset = (node % NUM_INVALIDATE_TLB_VECTORS) *
+		int node_offset = (idx % NUM_INVALIDATE_TLB_VECTORS) *
 			nr_node_vecs;
 		int cpu_offset = 0;
 		for_each_cpu(cpu, cpumask_of_node(node)) {
@@ -248,6 +248,7 @@
 			cpu_offset++;
 			cpu_offset = cpu_offset % nr_node_vecs;
 		}
+		idx++;
 	}
 }
 
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index a318194..ba9caa8 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1455,7 +1455,7 @@
 	 * the below initialization can't be in firmware because the
 	 * messaging IRQ will be determined by the OS
 	 */
-	apicid = uvhub_to_first_apicid(uvhub);
+	apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits;
 	uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
 				      ((apicid << 32) | vector));
 }
diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
index 56e421b..9daf5d1 100644
--- a/arch/x86/platform/uv/uv_time.c
+++ b/arch/x86/platform/uv/uv_time.c
@@ -89,6 +89,7 @@
 
 	apicid = cpu_physical_id(cpu);
 	pnode = uv_apicid_to_pnode(apicid);
+	apicid |= uv_apicid_hibits;
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	      (apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	      (X86_PLATFORM_IPI_VECTOR << UVH_IPI_INT_VECTOR_SHFT);
@@ -107,6 +108,7 @@
 static int uv_setup_intr(int cpu, u64 expires)
 {
 	u64 val;
+	unsigned long apicid = cpu_physical_id(cpu) | uv_apicid_hibits;
 	int pnode = uv_cpu_to_pnode(cpu);
 
 	uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG,
@@ -117,7 +119,7 @@
 		UVH_EVENT_OCCURRED0_RTC1_MASK);
 
 	val = (X86_PLATFORM_IPI_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) |
-		((u64)cpu_physical_id(cpu) << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
+		((u64)apicid << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
 
 	/* Set configuration */
 	uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG, val);
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 235c0f4..02c710b 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -75,6 +75,11 @@
 enum xen_domain_type xen_domain_type = XEN_NATIVE;
 EXPORT_SYMBOL_GPL(xen_domain_type);
 
+unsigned long *machine_to_phys_mapping = (void *)MACH2PHYS_VIRT_START;
+EXPORT_SYMBOL(machine_to_phys_mapping);
+unsigned int   machine_to_phys_order;
+EXPORT_SYMBOL(machine_to_phys_order);
+
 struct start_info *xen_start_info;
 EXPORT_SYMBOL_GPL(xen_start_info);
 
@@ -1090,6 +1095,8 @@
 /* First C function to be called on Xen boot */
 asmlinkage void __init xen_start_kernel(void)
 {
+	struct physdev_set_iopl set_iopl;
+	int rc;
 	pgd_t *pgd;
 
 	if (!xen_start_info)
@@ -1097,6 +1104,8 @@
 
 	xen_domain_type = XEN_PV_DOMAIN;
 
+	xen_setup_machphys_mapping();
+
 	/* Install Xen paravirt ops */
 	pv_info = xen_info;
 	pv_init_ops = xen_init_ops;
@@ -1191,8 +1200,6 @@
 	/* Allocate and initialize top and mid mfn levels for p2m structure */
 	xen_build_mfn_list_list();
 
-	init_mm.pgd = pgd;
-
 	/* keep using Xen gdt for now; no urgent need to change it */
 
 #ifdef CONFIG_X86_32
@@ -1202,10 +1209,18 @@
 #else
 	pv_info.kernel_rpl = 0;
 #endif
-
 	/* set the limit of our address space */
 	xen_reserve_top();
 
+	/* We used to do this in xen_arch_setup, but that is too late on AMD
+	 * were early_cpu_init (run before ->arch_setup()) calls early_amd_init
+	 * which pokes 0xcf8 port.
+	 */
+	set_iopl.iopl = 1;
+	rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
+	if (rc != 0)
+		xen_raw_printk("physdev_op failed %d\n", rc);
+
 #ifdef CONFIG_X86_32
 	/* set up basic CPUID stuff */
 	cpu_detect(&new_cpu_data);
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 21ed8d7..a1feff9 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -2034,6 +2034,20 @@
 	set_page_prot(pmd, PAGE_KERNEL_RO);
 }
 
+void __init xen_setup_machphys_mapping(void)
+{
+	struct xen_machphys_mapping mapping;
+	unsigned long machine_to_phys_nr_ents;
+
+	if (HYPERVISOR_memory_op(XENMEM_machphys_mapping, &mapping) == 0) {
+		machine_to_phys_mapping = (unsigned long *)mapping.v_start;
+		machine_to_phys_nr_ents = mapping.max_mfn + 1;
+	} else {
+		machine_to_phys_nr_ents = MACH2PHYS_NR_ENTRIES;
+	}
+	machine_to_phys_order = fls(machine_to_phys_nr_ents - 1);
+}
+
 #ifdef CONFIG_X86_64
 static void convert_pfn_mfn(void *v)
 {
@@ -2119,44 +2133,83 @@
 	return pgd;
 }
 #else	/* !CONFIG_X86_64 */
-static RESERVE_BRK_ARRAY(pmd_t, level2_kernel_pgt, PTRS_PER_PMD);
+static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD);
+static RESERVE_BRK_ARRAY(pmd_t, swapper_kernel_pmd, PTRS_PER_PMD);
+
+static __init void xen_write_cr3_init(unsigned long cr3)
+{
+	unsigned long pfn = PFN_DOWN(__pa(swapper_pg_dir));
+
+	BUG_ON(read_cr3() != __pa(initial_page_table));
+	BUG_ON(cr3 != __pa(swapper_pg_dir));
+
+	/*
+	 * We are switching to swapper_pg_dir for the first time (from
+	 * initial_page_table) and therefore need to mark that page
+	 * read-only and then pin it.
+	 *
+	 * Xen disallows sharing of kernel PMDs for PAE
+	 * guests. Therefore we must copy the kernel PMD from
+	 * initial_page_table into a new kernel PMD to be used in
+	 * swapper_pg_dir.
+	 */
+	swapper_kernel_pmd =
+		extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
+	memcpy(swapper_kernel_pmd, initial_kernel_pmd,
+	       sizeof(pmd_t) * PTRS_PER_PMD);
+	swapper_pg_dir[KERNEL_PGD_BOUNDARY] =
+		__pgd(__pa(swapper_kernel_pmd) | _PAGE_PRESENT);
+	set_page_prot(swapper_kernel_pmd, PAGE_KERNEL_RO);
+
+	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+	xen_write_cr3(cr3);
+	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, pfn);
+
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE,
+			  PFN_DOWN(__pa(initial_page_table)));
+	set_page_prot(initial_page_table, PAGE_KERNEL);
+	set_page_prot(initial_kernel_pmd, PAGE_KERNEL);
+
+	pv_mmu_ops.write_cr3 = &xen_write_cr3;
+}
 
 __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
 					 unsigned long max_pfn)
 {
 	pmd_t *kernel_pmd;
 
-	level2_kernel_pgt = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
+	initial_kernel_pmd =
+		extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
 
 	max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
 				  xen_start_info->nr_pt_frames * PAGE_SIZE +
 				  512*1024);
 
 	kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
-	memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
+	memcpy(initial_kernel_pmd, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
 
-	xen_map_identity_early(level2_kernel_pgt, max_pfn);
+	xen_map_identity_early(initial_kernel_pmd, max_pfn);
 
-	memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
-	set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
-			__pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
+	memcpy(initial_page_table, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+	initial_page_table[KERNEL_PGD_BOUNDARY] =
+		__pgd(__pa(initial_kernel_pmd) | _PAGE_PRESENT);
 
-	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
-	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+	set_page_prot(initial_kernel_pmd, PAGE_KERNEL_RO);
+	set_page_prot(initial_page_table, PAGE_KERNEL_RO);
 	set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
 
 	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
 
-	xen_write_cr3(__pa(swapper_pg_dir));
-
-	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE,
+			  PFN_DOWN(__pa(initial_page_table)));
+	xen_write_cr3(__pa(initial_page_table));
 
 	memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
 		      __pa(xen_start_info->pt_base +
 			   xen_start_info->nr_pt_frames * PAGE_SIZE),
 		      "XEN PAGETABLES");
 
-	return swapper_pg_dir;
+	return initial_page_table;
 }
 #endif	/* CONFIG_X86_64 */
 
@@ -2290,7 +2343,11 @@
 	.write_cr2 = xen_write_cr2,
 
 	.read_cr3 = xen_read_cr3,
+#ifdef CONFIG_X86_32
+	.write_cr3 = xen_write_cr3_init,
+#else
 	.write_cr3 = xen_write_cr3,
+#endif
 
 	.flush_tlb_user = xen_flush_tlb,
 	.flush_tlb_kernel = xen_flush_tlb,
@@ -2627,7 +2684,8 @@
 
 	prot = __pgprot(pgprot_val(prot) | _PAGE_IOMAP);
 
-	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+	BUG_ON(!((vma->vm_flags & (VM_PFNMAP | VM_RESERVED | VM_IO)) ==
+				(VM_PFNMAP | VM_RESERVED | VM_IO)));
 
 	rmd.mfn = mfn;
 	rmd.prot = prot;
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 769c4b0..01afd8a 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -23,7 +23,6 @@
 #include <xen/interface/callback.h>
 #include <xen/interface/memory.h>
 #include <xen/interface/physdev.h>
-#include <xen/interface/memory.h>
 #include <xen/features.h>
 
 #include "xen-ops.h"
@@ -248,8 +247,7 @@
 	else
 		extra_pages = 0;
 
-	if (!xen_initial_domain())
-		xen_add_extra_mem(extra_pages);
+	xen_add_extra_mem(extra_pages);
 
 	return "Xen";
 }
@@ -337,9 +335,6 @@
 
 void __init xen_arch_setup(void)
 {
-	struct physdev_set_iopl set_iopl;
-	int rc;
-
 	xen_panic_handler_init();
 
 	HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
@@ -356,11 +351,6 @@
 	xen_enable_sysenter();
 	xen_enable_syscall();
 
-	set_iopl.iopl = 1;
-	rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
-	if (rc != 0)
-		printk(KERN_INFO "physdev_op failed %d\n", rc);
-
 #ifdef CONFIG_ACPI
 	if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
 		printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 56ad453..004be80 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -645,7 +645,7 @@
 {
 	unsigned int nr_reads = 0, nr_writes = 0;
 	unsigned int max_nr_reads = throtl_grp_quantum*3/4;
-	unsigned int max_nr_writes = throtl_grp_quantum - nr_reads;
+	unsigned int max_nr_writes = throtl_grp_quantum - max_nr_reads;
 	struct bio *bio;
 
 	/* Try to dispatch 75% READS and 25% WRITES */
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index a1725e6..7888501 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1341,7 +1341,7 @@
 {
 	struct request_queue *q;
 	int cnt = FD_MAX_UNITS;
-	struct request *rq;
+	struct request *rq = NULL;
 
 	/* Find next queue we can dispatch from */
 	fdc_queue = fdc_queue + 1;
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 4e4cc6c..605a67e 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1399,7 +1399,7 @@
 {
 	struct request_queue *q;
 	int old_pos = fdc_queue;
-	struct request *rq;
+	struct request *rq = NULL;
 
 	do {
 		q = unit[fdc_queue].disk->queue;
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index a67d0a6..f291587 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -66,6 +66,7 @@
 MODULE_LICENSE("GPL");
 
 static DEFINE_MUTEX(cciss_mutex);
+static struct proc_dir_entry *proc_cciss;
 
 #include "cciss_cmd.h"
 #include "cciss.h"
@@ -363,8 +364,6 @@
 #define ENG_GIG_FACTOR (ENG_GIG/512)
 #define ENGAGE_SCSI	"engage scsi"
 
-static struct proc_dir_entry *proc_cciss;
-
 static void cciss_seq_show_header(struct seq_file *seq)
 {
 	ctlr_info_t *h = seq->private;
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 255035c..4f9e22f 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -65,7 +65,7 @@
 
 struct blk_shadow {
 	struct blkif_request req;
-	unsigned long request;
+	struct request *request;
 	unsigned long frame[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 };
 
@@ -136,7 +136,7 @@
 			       unsigned long id)
 {
 	info->shadow[id].req.id  = info->shadow_free;
-	info->shadow[id].request = 0;
+	info->shadow[id].request = NULL;
 	info->shadow_free = id;
 }
 
@@ -245,14 +245,11 @@
 }
 
 /*
- * blkif_queue_request
+ * Generate a Xen blkfront IO request from a blk layer request.  Reads
+ * and writes are handled as expected.  Since we lack a loose flush
+ * request, we map flushes into a full ordered barrier.
  *
- * request block io
- *
- * id: for guest use only.
- * operation: BLKIF_OP_{READ,WRITE,PROBE}
- * buffer: buffer to read/write into. this should be a
- *   virtual address in the guest os.
+ * @req: a request struct
  */
 static int blkif_queue_request(struct request *req)
 {
@@ -281,7 +278,7 @@
 	/* Fill out a communications ring structure. */
 	ring_req = RING_GET_REQUEST(&info->ring, info->ring.req_prod_pvt);
 	id = get_id_from_freelist(info);
-	info->shadow[id].request = (unsigned long)req;
+	info->shadow[id].request = req;
 
 	ring_req->id = id;
 	ring_req->sector_number = (blkif_sector_t)blk_rq_pos(req);
@@ -290,6 +287,18 @@
 	ring_req->operation = rq_data_dir(req) ?
 		BLKIF_OP_WRITE : BLKIF_OP_READ;
 
+	if (req->cmd_flags & (REQ_FLUSH | REQ_FUA)) {
+		/*
+		 * Ideally we could just do an unordered
+		 * flush-to-disk, but all we have is a full write
+		 * barrier at the moment.  However, a barrier write is
+		 * a superset of FUA, so we can implement it the same
+		 * way.  (It's also a FLUSH+FUA, since it is
+		 * guaranteed ordered WRT previous writes.)
+		 */
+		ring_req->operation = BLKIF_OP_WRITE_BARRIER;
+	}
+
 	ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
 	BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
 
@@ -634,7 +643,7 @@
 
 		bret = RING_GET_RESPONSE(&info->ring, i);
 		id   = bret->id;
-		req  = (struct request *)info->shadow[id].request;
+		req  = info->shadow[id].request;
 
 		blkif_completion(&info->shadow[id]);
 
@@ -647,6 +656,16 @@
 				printk(KERN_WARNING "blkfront: %s: write barrier op failed\n",
 				       info->gd->disk_name);
 				error = -EOPNOTSUPP;
+			}
+			if (unlikely(bret->status == BLKIF_RSP_ERROR &&
+				     info->shadow[id].req.nr_segments == 0)) {
+				printk(KERN_WARNING "blkfront: %s: empty write barrier op failed\n",
+				       info->gd->disk_name);
+				error = -EOPNOTSUPP;
+			}
+			if (unlikely(error)) {
+				if (error == -EOPNOTSUPP)
+					error = 0;
 				info->feature_flush = 0;
 				xlvbd_flush(info);
 			}
@@ -899,7 +918,7 @@
 	/* Stage 3: Find pending requests and requeue them. */
 	for (i = 0; i < BLK_RING_SIZE; i++) {
 		/* Not in use? */
-		if (copy[i].request == 0)
+		if (!copy[i].request)
 			continue;
 
 		/* Grab a request slot and copy shadow state into it. */
@@ -916,9 +935,7 @@
 				req->seg[j].gref,
 				info->xbdev->otherend_id,
 				pfn_to_mfn(info->shadow[req->id].frame[j]),
-				rq_data_dir(
-					(struct request *)
-					info->shadow[req->id].request));
+				rq_data_dir(info->shadow[req->id].request));
 		info->shadow[req->id].req = *req;
 
 		info->ring.req_prod_pvt++;
@@ -1067,14 +1084,8 @@
 	 */
 	info->feature_flush = 0;
 
-	/*
-	 * The driver doesn't properly handled empty flushes, so
-	 * lets disable barrier support for now.
-	 */
-#if 0
 	if (!err && barrier)
-		info->feature_flush = REQ_FLUSH;
-#endif
+		info->feature_flush = REQ_FLUSH | REQ_FUA;
 
 	err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size);
 	if (err) {
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 6c1b676..896a2ce 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1547,31 +1547,16 @@
 	nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2;
 
 	vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL);
-	if (!vqs) {
-		err = -ENOMEM;
-		goto fail;
-	}
 	io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL);
-	if (!io_callbacks) {
-		err = -ENOMEM;
-		goto free_vqs;
-	}
 	io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL);
-	if (!io_names) {
-		err = -ENOMEM;
-		goto free_callbacks;
-	}
 	portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
 				  GFP_KERNEL);
-	if (!portdev->in_vqs) {
-		err = -ENOMEM;
-		goto free_names;
-	}
 	portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
 				   GFP_KERNEL);
-	if (!portdev->out_vqs) {
+	if (!vqs || !io_callbacks || !io_names || !portdev->in_vqs ||
+			!portdev->out_vqs) {
 		err = -ENOMEM;
-		goto free_invqs;
+		goto free;
 	}
 
 	/*
@@ -1605,7 +1590,7 @@
 					      io_callbacks,
 					      (const char **)io_names);
 	if (err)
-		goto free_outvqs;
+		goto free;
 
 	j = 0;
 	portdev->in_vqs[0] = vqs[0];
@@ -1621,23 +1606,19 @@
 			portdev->out_vqs[i] = vqs[j + 1];
 		}
 	}
-	kfree(io_callbacks);
 	kfree(io_names);
+	kfree(io_callbacks);
 	kfree(vqs);
 
 	return 0;
 
-free_names:
-	kfree(io_names);
-free_callbacks:
-	kfree(io_callbacks);
-free_outvqs:
+free:
 	kfree(portdev->out_vqs);
-free_invqs:
 	kfree(portdev->in_vqs);
-free_vqs:
+	kfree(io_names);
+	kfree(io_callbacks);
 	kfree(vqs);
-fail:
+
 	return err;
 }
 
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index 9379834..c4c40be 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -497,12 +497,14 @@
 	0
 };
 
+#ifdef MODULE
 static struct pci_device_id i5k_amb_ids[] __devinitdata = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR) },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, i5k_amb_ids);
+#endif
 
 static int __devinit i5k_amb_probe(struct platform_device *pdev)
 {
diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
index 9f4bae0..8853afc 100644
--- a/drivers/hwmon/lis3lv02d_i2c.c
+++ b/drivers/hwmon/lis3lv02d_i2c.c
@@ -186,7 +186,7 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int lis3lv02d_i2c_suspend(struct device *dev)
 {
 	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
@@ -213,12 +213,9 @@
 
 	return 0;
 }
-#else
-#define lis3lv02d_i2c_suspend	NULL
-#define lis3lv02d_i2c_resume	NULL
-#define lis3lv02d_i2c_shutdown	NULL
-#endif
+#endif /* CONFIG_PM_SLEEP */
 
+#ifdef CONFIG_PM_RUNTIME
 static int lis3_i2c_runtime_suspend(struct device *dev)
 {
 	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
@@ -236,6 +233,7 @@
 	lis3lv02d_poweron(lis3);
 	return 0;
 }
+#endif /* CONFIG_PM_RUNTIME */
 
 static const struct i2c_device_id lis3lv02d_id[] = {
 	{"lis3lv02d", 0 },
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 3782f31f..33facd0 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -125,11 +125,22 @@
 	u8			num_leds;
 };
 
-#define cdev_to_led(c)		container_of(c, struct lp5521_led, cdev)
-#define engine_to_lp5521(eng)	container_of((eng), struct lp5521_chip, \
-						engines[(eng)->id - 1])
-#define led_to_lp5521(led)	container_of((led), struct lp5521_chip, \
-						leds[(led)->id])
+static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev)
+{
+	return container_of(cdev, struct lp5521_led, cdev);
+}
+
+static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine)
+{
+	return container_of(engine, struct lp5521_chip,
+			    engines[engine->id - 1]);
+}
+
+static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led)
+{
+	return container_of(led, struct lp5521_chip,
+			    leds[led->id]);
+}
 
 static void lp5521_led_brightness_work(struct work_struct *work);
 
@@ -185,14 +196,17 @@
 
 	/* move current engine to direct mode and remember the state */
 	ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT);
-	usleep_range(1000, 10000);
+	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
+	usleep_range(1000, 2000);
 	ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode);
 
 	/* For loading, all the engines to load mode */
 	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
-	usleep_range(1000, 10000);
+	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
+	usleep_range(1000, 2000);
 	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
-	usleep_range(1000, 10000);
+	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
+	usleep_range(1000, 2000);
 
 	addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE;
 	i2c_smbus_write_i2c_block_data(client,
@@ -231,10 +245,6 @@
 
 	lp5521_init_engine(chip, attr_group);
 
-	lp5521_write(client, LP5521_REG_RESET, 0xff);
-
-	usleep_range(10000, 20000);
-
 	/* Set all PWMs to direct control mode */
 	ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F);
 
@@ -251,8 +261,8 @@
 	ret |= lp5521_write(client, LP5521_REG_ENABLE,
 			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM |
 			LP5521_EXEC_RUN);
-	/* enable takes 500us */
-	usleep_range(500, 20000);
+	/* enable takes 500us. 1 - 2 ms leaves some margin */
+	usleep_range(1000, 2000);
 
 	return ret;
 }
@@ -305,7 +315,8 @@
 			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM);
 	if (ret)
 		return ret;
-	usleep_range(1000, 10000);
+	/* enable takes 500us. 1 - 2 ms leaves some margin */
+	usleep_range(1000, 2000);
 	ret = lp5521_read(client, LP5521_REG_ENABLE, &buf);
 	if (ret)
 		return ret;
@@ -693,11 +704,16 @@
 
 	if (pdata->enable) {
 		pdata->enable(0);
-		usleep_range(1000, 10000);
+		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
 		pdata->enable(1);
-		usleep_range(1000, 10000); /* Spec says min 500us */
+		usleep_range(1000, 2000); /* 500us abs min. */
 	}
 
+	lp5521_write(client, LP5521_REG_RESET, 0xff);
+	usleep_range(10000, 20000); /*
+				     * Exact value is not available. 10 - 20ms
+				     * appears to be enough for reset.
+				     */
 	ret = lp5521_detect(client);
 
 	if (ret) {
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 1e11fcc..0cc4ead 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -134,15 +134,18 @@
 	u8			num_leds;
 };
 
-#define cdev_to_led(c)          container_of(c, struct lp5523_led, cdev)
+static inline struct lp5523_led *cdev_to_led(struct led_classdev *cdev)
+{
+	return container_of(cdev, struct lp5523_led, cdev);
+}
 
-static struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
+static inline struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
 {
 	return container_of(engine, struct lp5523_chip,
 			    engines[engine->id - 1]);
 }
 
-static struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
+static inline struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
 {
 	return container_of(led, struct lp5523_chip,
 			    leds[led->id]);
@@ -200,13 +203,9 @@
 		{ 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
 	};
 
-	lp5523_write(client, LP5523_REG_RESET, 0xff);
-
-	usleep_range(10000, 100000);
-
 	ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
-	/* Chip startup time after reset is 500 us */
-	usleep_range(1000, 10000);
+	/* Chip startup time is 500 us, 1 - 2 ms gives some margin */
+	usleep_range(1000, 2000);
 
 	ret |= lp5523_write(client, LP5523_REG_CONFIG,
 			    LP5523_AUTO_INC | LP5523_PWR_SAVE |
@@ -243,8 +242,8 @@
 		return -1;
 	}
 
-	/* Wait 3ms and check the engine status */
-	usleep_range(3000, 20000);
+	/* Let the programs run for couple of ms and check the engine status */
+	usleep_range(3000, 6000);
 	lp5523_read(client, LP5523_REG_STATUS, &status);
 	status &= LP5523_ENG_STATUS_MASK;
 
@@ -449,10 +448,10 @@
 	/* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
 	lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL,
 				    LP5523_EN_LEDTEST | 16);
-	usleep_range(3000, 10000);
+	usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
 	ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
 	if (!(status & LP5523_LEDTEST_DONE))
-		usleep_range(3000, 10000);
+		usleep_range(3000, 6000); /* Was not ready. Wait little bit */
 
 	ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
 	vdd--;	/* There may be some fluctuation in measurement */
@@ -468,16 +467,16 @@
 			chip->pdata->led_config[i].led_current);
 
 		lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff);
-		/* let current stabilize 2ms before measurements start */
-		usleep_range(2000, 10000);
+		/* let current stabilize 2 - 4ms before measurements start */
+		usleep_range(2000, 4000);
 		lp5523_write(chip->client,
 			     LP5523_REG_LED_TEST_CTRL,
 			     LP5523_EN_LEDTEST | i);
-		/* ledtest takes 2.7ms */
-		usleep_range(3000, 10000);
+		/* ADC conversion time is 2.7 ms typically */
+		usleep_range(3000, 6000);
 		ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
 		if (!(status & LP5523_LEDTEST_DONE))
-			usleep_range(3000, 10000);
+			usleep_range(3000, 6000);/* Was not ready. Wait. */
 		ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
 
 		if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
@@ -930,11 +929,16 @@
 
 	if (pdata->enable) {
 		pdata->enable(0);
-		usleep_range(1000, 10000);
+		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
 		pdata->enable(1);
-		usleep_range(1000, 10000); /* Spec says min 500us */
+		usleep_range(1000, 2000); /* 500us abs min. */
 	}
 
+	lp5523_write(client, LP5523_REG_RESET, 0xff);
+	usleep_range(10000, 20000); /*
+				     * Exact value is not available. 10 - 20ms
+				     * appears to be enough for reset.
+				     */
 	ret = lp5523_detect(client);
 	if (ret)
 		goto fail2;
diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c
index a688293..614ebeb 100644
--- a/drivers/leds/leds-ss4200.c
+++ b/drivers/leds/leds-ss4200.c
@@ -102,6 +102,7 @@
 			DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00")
 		}
 	},
+	{}
 };
 
 /*
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 324a366..84c46a1 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1337,7 +1337,7 @@
 	md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
 		       rdev->sb_page);
 	md_super_wait(rdev->mddev);
-	return num_sectors / 2; /* kB for sysfs */
+	return num_sectors;
 }
 
 
@@ -1704,7 +1704,7 @@
 	md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
 		       rdev->sb_page);
 	md_super_wait(rdev->mddev);
-	return num_sectors / 2; /* kB for sysfs */
+	return num_sectors;
 }
 
 static struct super_type super_types[] = {
@@ -4338,6 +4338,8 @@
 	if (mddev->kobj.sd &&
 	    sysfs_create_group(&mddev->kobj, &md_bitmap_group))
 		printk(KERN_DEBUG "pointless warning\n");
+
+	blk_queue_flush(mddev->queue, REQ_FLUSH | REQ_FUA);
  abort:
 	mutex_unlock(&disks_mutex);
 	if (!error && mddev->kobj.sd) {
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 45f8324..845cf95 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1161,6 +1161,7 @@
 		 * is not possible.
 		 */
 		if (!test_bit(Faulty, &rdev->flags) &&
+		    !mddev->recovery_disabled &&
 		    mddev->degraded < conf->raid_disks) {
 			err = -EBUSY;
 			goto abort;
diff --git a/drivers/misc/isl29020.c b/drivers/misc/isl29020.c
index ca47e62..307aada 100644
--- a/drivers/misc/isl29020.c
+++ b/drivers/misc/isl29020.c
@@ -183,9 +183,7 @@
 
 static int isl29020_remove(struct i2c_client *client)
 {
-	struct als_data *data = i2c_get_clientdata(client);
 	sysfs_remove_group(&client->dev.kobj, &m_als_gr);
-	kfree(data);
 	return 0;
 }
 
@@ -245,6 +243,6 @@
 module_init(sensor_isl29020_init);
 module_exit(sensor_isl29020_exit);
 
-MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com");
+MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com>");
 MODULE_DESCRIPTION("Intersil isl29020 ALS Driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c
index d551f09..6956f7e 100644
--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -439,18 +439,23 @@
 	 * nodes that can comprise an access protection grouping. The access
 	 * protection is in regards to memory, IOI and IPI.
 	 */
-	max_regions = 64;
 	region_size = xp_region_size;
 
-	switch (region_size) {
-	case 128:
-		max_regions *= 2;
-	case 64:
-		max_regions *= 2;
-	case 32:
-		max_regions *= 2;
-		region_size = 16;
-		DBUG_ON(!is_shub2());
+	if (is_uv())
+		max_regions = 256;
+	else {
+		max_regions = 64;
+
+		switch (region_size) {
+		case 128:
+			max_regions *= 2;
+		case 64:
+			max_regions *= 2;
+		case 32:
+			max_regions *= 2;
+			region_size = 16;
+			DBUG_ON(!is_shub2());
+		}
 	}
 
 	for (region = 0; region < max_regions; region++) {
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 8f86d70..31ae07a 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1559,7 +1559,7 @@
 
 	if (host->caps & MMC_CAP_DISABLE)
 		cancel_delayed_work(&host->disable);
-	cancel_delayed_work(&host->detect);
+	cancel_delayed_work_sync(&host->detect);
 	mmc_flush_scheduled_work();
 
 	/* clear pm flags now and let card drivers set them as needed */
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 995261f..77f93c3 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -375,7 +375,7 @@
 	struct mmc_card *oldcard)
 {
 	struct mmc_card *card;
-	int err, ddr = MMC_SDR_MODE;
+	int err, ddr = 0;
 	u32 cid[4];
 	unsigned int max_dtr;
 
@@ -562,7 +562,11 @@
 			       1 << bus_width, ddr);
 			err = 0;
 		} else {
-			mmc_card_set_ddr_mode(card);
+			if (ddr)
+				mmc_card_set_ddr_mode(card);
+			else
+				ddr = MMC_SDR_MODE;
+
 			mmc_set_bus_width_ddr(card->host, bus_width, ddr);
 		}
 	}
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index c3ad105..efef5f9 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -547,9 +547,11 @@
 	BUG_ON(!host->card);
 
 	/* Make sure card is powered before detecting it */
-	err = pm_runtime_get_sync(&host->card->dev);
-	if (err < 0)
-		goto out;
+	if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+		err = pm_runtime_get_sync(&host->card->dev);
+		if (err < 0)
+			goto out;
+	}
 
 	mmc_claim_host(host);
 
@@ -560,6 +562,20 @@
 
 	mmc_release_host(host);
 
+	/*
+	 * Tell PM core it's OK to power off the card now.
+	 *
+	 * The _sync variant is used in order to ensure that the card
+	 * is left powered off in case an error occurred, and the card
+	 * is going to be removed.
+	 *
+	 * Since there is no specific reason to believe a new user
+	 * is about to show up at this point, the _sync variant is
+	 * desirable anyway.
+	 */
+	if (host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_sync(&host->card->dev);
+
 out:
 	if (err) {
 		mmc_sdio_remove(host);
@@ -568,9 +584,6 @@
 		mmc_detach_bus(host);
 		mmc_release_host(host);
 	}
-
-	/* Tell PM core that we're done */
-	pm_runtime_put(&host->card->dev);
 }
 
 /*
@@ -718,16 +731,21 @@
 	card = host->card;
 
 	/*
-	 * Let runtime PM core know our card is active
+	 * Enable runtime PM only if supported by host+card+board
 	 */
-	err = pm_runtime_set_active(&card->dev);
-	if (err)
-		goto remove;
+	if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+		/*
+		 * Let runtime PM core know our card is active
+		 */
+		err = pm_runtime_set_active(&card->dev);
+		if (err)
+			goto remove;
 
-	/*
-	 * Enable runtime PM for this card
-	 */
-	pm_runtime_enable(&card->dev);
+		/*
+		 * Enable runtime PM for this card
+		 */
+		pm_runtime_enable(&card->dev);
+	}
 
 	/*
 	 * The number of functions on the card is encoded inside
@@ -745,9 +763,10 @@
 			goto remove;
 
 		/*
-		 * Enable Runtime PM for this func
+		 * Enable Runtime PM for this func (if supported)
 		 */
-		pm_runtime_enable(&card->sdio_func[i]->dev);
+		if (host->caps & MMC_CAP_POWER_OFF_CARD)
+			pm_runtime_enable(&card->sdio_func[i]->dev);
 	}
 
 	mmc_release_host(host);
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 2716c7a..203da44 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -17,6 +17,7 @@
 #include <linux/pm_runtime.h>
 
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/sdio_func.h>
 
 #include "sdio_cis.h"
@@ -132,9 +133,11 @@
 	 * it should call pm_runtime_put_noidle() in its probe routine and
 	 * pm_runtime_get_noresume() in its remove routine.
 	 */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto out;
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto out;
+	}
 
 	/* Set the default block size so the driver is sure it's something
 	 * sensible. */
@@ -151,7 +154,8 @@
 	return 0;
 
 disable_runtimepm:
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 out:
 	return ret;
 }
@@ -160,12 +164,14 @@
 {
 	struct sdio_driver *drv = to_sdio_driver(dev->driver);
 	struct sdio_func *func = dev_to_sdio_func(dev);
-	int ret;
+	int ret = 0;
 
 	/* Make sure card is powered before invoking ->remove() */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto out;
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto out;
+	}
 
 	drv->remove(func);
 
@@ -178,10 +184,12 @@
 	}
 
 	/* First, undo the increment made directly above */
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 
 	/* Then undo the runtime PM settings in sdio_bus_probe() */
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 
 out:
 	return ret;
@@ -191,6 +199,8 @@
 
 static int sdio_bus_pm_prepare(struct device *dev)
 {
+	struct sdio_func *func = dev_to_sdio_func(dev);
+
 	/*
 	 * Resume an SDIO device which was suspended at run time at this
 	 * point, in order to allow standard SDIO suspend/resume paths
@@ -212,7 +222,8 @@
 	 * since there is little point in failing system suspend if a
 	 * device can't be resumed.
 	 */
-	pm_runtime_resume(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_resume(dev);
 
 	return 0;
 }
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 82a1079..5d46021 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1002,7 +1002,7 @@
 	 * Monitor a 0->1 transition first
 	 */
 	if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
-		while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit))
+		while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
 					&& (i++ < limit))
 			cpu_relax();
 	}
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 2e9cca1..9b82910 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdhci-pltfm.h>
+#include <mach/hardware.h>
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
@@ -112,6 +113,13 @@
 	clk_enable(clk);
 	pltfm_host->clk = clk;
 
+	if (cpu_is_mx35() || cpu_is_mx51())
+		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+	/* Fix errata ENGcm07207 which is present on i.MX25 and i.MX35 */
+	if (cpu_is_mx25() || cpu_is_mx35())
+		host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+
 	return 0;
 }
 
@@ -133,10 +141,8 @@
 };
 
 struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
-	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_MULTIBLOCK
-			| SDHCI_QUIRK_BROKEN_ADMA,
+	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA,
 	/* ADMA has issues. Might be fixable */
-	/* NO_MULTIBLOCK might be MX35 only (Errata: ENGcm07207) */
 	.ops = &sdhci_esdhc_ops,
 	.init = esdhc_pltfm_init,
 	.exit = esdhc_pltfm_exit,
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 55746ba..3d9c246 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -149,11 +149,11 @@
  * ADMA operation is disabled for Moorestown platform due to
  * hardware bugs.
  */
-static int mrst_hc1_probe(struct sdhci_pci_chip *chip)
+static int mrst_hc_probe(struct sdhci_pci_chip *chip)
 {
 	/*
-	 * slots number is fixed here for MRST as SDIO3 is never used and has
-	 * hardware bugs.
+	 * slots number is fixed here for MRST as SDIO3/5 are never used and
+	 * have hardware bugs.
 	 */
 	chip->num_slots = 1;
 	return 0;
@@ -163,9 +163,9 @@
 	.quirks		= SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
 };
 
-static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1 = {
+static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = {
 	.quirks		= SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
-	.probe		= mrst_hc1_probe,
+	.probe		= mrst_hc_probe,
 };
 
 static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
@@ -538,7 +538,15 @@
 		.device		= PCI_DEVICE_ID_INTEL_MRST_SD1,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
-		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_MRST_SD2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
 	},
 
 	{
@@ -637,6 +645,7 @@
 {
 	struct sdhci_pci_chip *chip;
 	struct sdhci_pci_slot *slot;
+	mmc_pm_flag_t slot_pm_flags;
 	mmc_pm_flag_t pm_flags = 0;
 	int i, ret;
 
@@ -657,7 +666,11 @@
 			return ret;
 		}
 
-		pm_flags |= slot->host->mmc->pm_flags;
+		slot_pm_flags = slot->host->mmc->pm_flags;
+		if (slot_pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+			sdhci_enable_irq_wakeups(slot->host);
+
+		pm_flags |= slot_pm_flags;
 	}
 
 	if (chip->fixes && chip->fixes->suspend) {
@@ -671,8 +684,10 @@
 
 	pci_save_state(pdev);
 	if (pm_flags & MMC_PM_KEEP_POWER) {
-		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) {
+			pci_pme_active(pdev, true);
 			pci_enable_wake(pdev, PCI_D3hot, 1);
+		}
 		pci_set_power_state(pdev, PCI_D3hot);
 	} else {
 		pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c
index fc406ac..5a61208 100644
--- a/drivers/mmc/host/sdhci-pxa.c
+++ b/drivers/mmc/host/sdhci-pxa.c
@@ -141,6 +141,10 @@
 	if (pdata->quirks)
 		host->quirks |= pdata->quirks;
 
+	/* If slot design supports 8 bit data, indicate this to MMC. */
+	if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
+		host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add host\n");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 782c0ee..a25db42 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1185,18 +1185,32 @@
 	if (host->ops->platform_send_init_74_clocks)
 		host->ops->platform_send_init_74_clocks(host, ios->power_mode);
 
+	/*
+	 * If your platform has 8-bit width support but is not a v3 controller,
+	 * or if it requires special setup code, you should implement that in
+	 * platform_8bit_width().
+	 */
+	if (host->ops->platform_8bit_width)
+		host->ops->platform_8bit_width(host, ios->bus_width);
+	else {
+		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+		if (ios->bus_width == MMC_BUS_WIDTH_8) {
+			ctrl &= ~SDHCI_CTRL_4BITBUS;
+			if (host->version >= SDHCI_SPEC_300)
+				ctrl |= SDHCI_CTRL_8BITBUS;
+		} else {
+			if (host->version >= SDHCI_SPEC_300)
+				ctrl &= ~SDHCI_CTRL_8BITBUS;
+			if (ios->bus_width == MMC_BUS_WIDTH_4)
+				ctrl |= SDHCI_CTRL_4BITBUS;
+			else
+				ctrl &= ~SDHCI_CTRL_4BITBUS;
+		}
+		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+	}
+
 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 
-	if (ios->bus_width == MMC_BUS_WIDTH_8)
-		ctrl |= SDHCI_CTRL_8BITBUS;
-	else
-		ctrl &= ~SDHCI_CTRL_8BITBUS;
-
-	if (ios->bus_width == MMC_BUS_WIDTH_4)
-		ctrl |= SDHCI_CTRL_4BITBUS;
-	else
-		ctrl &= ~SDHCI_CTRL_4BITBUS;
-
 	if ((ios->timing == MMC_TIMING_SD_HS ||
 	     ios->timing == MMC_TIMING_MMC_HS)
 	    && !(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT))
@@ -1681,6 +1695,16 @@
 
 EXPORT_SYMBOL_GPL(sdhci_resume_host);
 
+void sdhci_enable_irq_wakeups(struct sdhci_host *host)
+{
+	u8 val;
+	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+	val |= SDHCI_WAKE_ON_INT;
+	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+
+EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
+
 #endif /* CONFIG_PM */
 
 /*****************************************************************************\
@@ -1845,11 +1869,19 @@
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
 	else
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
+
 	mmc->f_max = host->max_clk;
 	mmc->caps |= MMC_CAP_SDIO_IRQ;
 
+	/*
+	 * A controller may support 8-bit width, but the board itself
+	 * might not have the pins brought out.  Boards that support
+	 * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
+	 * their platform code before calling sdhci_add_host(), and we
+	 * won't assume 8-bit width for hosts without that CAP.
+	 */
 	if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
-		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
 
 	if (caps & SDHCI_CAN_DO_HISPD)
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index b7b8a3b..e42d7f0 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -76,7 +76,7 @@
 #define   SDHCI_CTRL_ADMA1	0x08
 #define   SDHCI_CTRL_ADMA32	0x10
 #define   SDHCI_CTRL_ADMA64	0x18
-#define  SDHCI_CTRL_8BITBUS	0x20
+#define   SDHCI_CTRL_8BITBUS	0x20
 
 #define SDHCI_POWER_CONTROL	0x29
 #define  SDHCI_POWER_ON		0x01
@@ -87,6 +87,9 @@
 #define SDHCI_BLOCK_GAP_CONTROL	0x2A
 
 #define SDHCI_WAKE_UP_CONTROL	0x2B
+#define  SDHCI_WAKE_ON_INT	0x01
+#define  SDHCI_WAKE_ON_INSERT	0x02
+#define  SDHCI_WAKE_ON_REMOVE	0x04
 
 #define SDHCI_CLOCK_CONTROL	0x2C
 #define  SDHCI_DIVIDER_SHIFT	8
@@ -152,6 +155,7 @@
 #define  SDHCI_CLOCK_BASE_SHIFT	8
 #define  SDHCI_MAX_BLOCK_MASK	0x00030000
 #define  SDHCI_MAX_BLOCK_SHIFT  16
+#define  SDHCI_CAN_DO_8BIT	0x00040000
 #define  SDHCI_CAN_DO_ADMA2	0x00080000
 #define  SDHCI_CAN_DO_ADMA1	0x00100000
 #define  SDHCI_CAN_DO_HISPD	0x00200000
@@ -212,6 +216,8 @@
 	unsigned int	(*get_max_clock)(struct sdhci_host *host);
 	unsigned int	(*get_min_clock)(struct sdhci_host *host);
 	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
+	int		(*platform_8bit_width)(struct sdhci_host *host,
+					       int width);
 	void (*platform_send_init_74_clocks)(struct sdhci_host *host,
 					     u8 power_mode);
 	unsigned int    (*get_ro)(struct sdhci_host *host);
@@ -317,6 +323,7 @@
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
 extern int sdhci_resume_host(struct sdhci_host *host);
+extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
 #endif
 
 #endif /* __SDHCI_HW_H */
diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c
index b4ead4a..f8f65df 100644
--- a/drivers/mmc/host/ushc.c
+++ b/drivers/mmc/host/ushc.c
@@ -425,7 +425,7 @@
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 	struct mmc_host *mmc;
 	struct ushc_data *ushc;
-	int ret = -ENOMEM;
+	int ret;
 
 	mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev);
 	if (mmc == NULL)
@@ -462,11 +462,15 @@
 	mmc->max_blk_count = 511;
 
 	ushc->int_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->int_urb == NULL)
+	if (ushc->int_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->int_data = kzalloc(sizeof(struct ushc_int_data), GFP_KERNEL);
-	if (ushc->int_data == NULL)
+	if (ushc->int_data == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	usb_fill_int_urb(ushc->int_urb, ushc->usb_dev,
 			 usb_rcvintpipe(usb_dev,
 					intf->cur_altsetting->endpoint[0].desc.bEndpointAddress),
@@ -475,11 +479,15 @@
 			 intf->cur_altsetting->endpoint[0].desc.bInterval);
 
 	ushc->cbw_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->cbw_urb == NULL)
+	if (ushc->cbw_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->cbw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
-	if (ushc->cbw == NULL)
+	if (ushc->cbw == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->cbw->signature = USHC_CBW_SIGNATURE;
 
 	usb_fill_bulk_urb(ushc->cbw_urb, ushc->usb_dev, usb_sndbulkpipe(usb_dev, 2),
@@ -487,15 +495,21 @@
 			  cbw_callback, ushc);
 
 	ushc->data_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->data_urb == NULL)
+	if (ushc->data_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 
 	ushc->csw_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->csw_urb == NULL)
+	if (ushc->csw_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
-	if (ushc->csw == NULL)
+	if (ushc->csw == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	usb_fill_bulk_urb(ushc->csw_urb, ushc->usb_dev, usb_rcvbulkpipe(usb_dev, 6),
 			  ushc->csw, sizeof(struct ushc_csw),
 			  csw_callback, ushc);
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 3c63186..204345b 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -787,16 +787,15 @@
 		 * erased, so it became unstable and corrupted, and should be
 		 * erased.
 		 */
-		return 0;
+		err = 0;
+		goto out_unlock;
 	}
 
 	if (err)
-		return err;
+		goto out_unlock;
 
-	if (ubi_check_pattern(ubi->peb_buf1, 0xFF, ubi->leb_size)) {
-		mutex_unlock(&ubi->buf_mutex);
-		return 0;
-	}
+	if (ubi_check_pattern(ubi->peb_buf1, 0xFF, ubi->leb_size))
+		goto out_unlock;
 
 	ubi_err("PEB %d contains corrupted VID header, and the data does not "
 		"contain all 0xFF, this may be a non-UBI PEB or a severe VID "
@@ -806,8 +805,11 @@
 		pnum, ubi->leb_start, ubi->leb_size);
 	ubi_dbg_print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
 			       ubi->peb_buf1, ubi->leb_size, 1);
+	err = 1;
+
+out_unlock:
 	mutex_unlock(&ubi->buf_mutex);
-	return 1;
+	return err;
 }
 
 /**
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f6668cd..43db398 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2945,6 +2945,18 @@
 
 source "drivers/net/caif/Kconfig"
 
+config TILE_NET
+	tristate "Tilera GBE/XGBE network driver support"
+	depends on TILE
+	default y
+	select CRC32
+	help
+	  This is a standard Linux network device driver for the
+	  on-chip Tilera Gigabit Ethernet and XAUI interfaces.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called tile_net.
+
 config XEN_NETDEV_FRONTEND
 	tristate "Xen network device frontend driver"
 	depends on XEN
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 652fc6b..b90738d 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -301,3 +301,4 @@
 
 obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
 obj-$(CONFIG_PCH_GBE) += pch_gbe/
+obj-$(CONFIG_TILE_NET) += tile/
diff --git a/drivers/net/atl1c/atl1c_hw.c b/drivers/net/atl1c/atl1c_hw.c
index 919080b..1bf6720 100644
--- a/drivers/net/atl1c/atl1c_hw.c
+++ b/drivers/net/atl1c/atl1c_hw.c
@@ -82,7 +82,7 @@
 	addr[0] = addr[1] = 0;
 	AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data);
 	if (atl1c_check_eeprom_exist(hw)) {
-		if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b) {
+		if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c) {
 			/* Enable OTP CLK */
 			if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) {
 				otp_ctrl_data |= OTP_CTRL_CLK_EN;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4686c39..4d62f7b 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -31,7 +31,7 @@
 
 char e1000_driver_name[] = "e1000";
 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
-#define DRV_VERSION "7.3.21-k6-NAPI"
+#define DRV_VERSION "7.3.21-k8-NAPI"
 const char e1000_driver_version[] = DRV_VERSION;
 static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -485,9 +485,6 @@
 	struct net_device *netdev = adapter->netdev;
 	u32 rctl, tctl;
 
-	/* signal that we're down so the interrupt handler does not
-	 * reschedule our watchdog timer */
-	set_bit(__E1000_DOWN, &adapter->flags);
 
 	/* disable receives in the hardware */
 	rctl = er32(RCTL);
@@ -508,6 +505,13 @@
 
 	e1000_irq_disable(adapter);
 
+	/*
+	 * Setting DOWN must be after irq_disable to prevent
+	 * a screaming interrupt.  Setting DOWN also prevents
+	 * timers and tasks from rescheduling.
+	 */
+	set_bit(__E1000_DOWN, &adapter->flags);
+
 	del_timer_sync(&adapter->tx_fifo_stall_timer);
 	del_timer_sync(&adapter->watchdog_timer);
 	del_timer_sync(&adapter->phy_info_timer);
diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c
index 00b38bc..52a7c86 100644
--- a/drivers/net/irda/sh_sir.c
+++ b/drivers/net/irda/sh_sir.c
@@ -258,7 +258,7 @@
 
 	/* Baud Rate Error Correction x 10000 */
 	u32 rate_err_array[] = {
-		0000, 0625, 1250, 1875,
+		   0,  625, 1250, 1875,
 		2500, 3125, 3750, 4375,
 		5000, 5625, 6250, 6875,
 		7500, 8125, 8750, 9375,
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index f0bd1a1..e8b9c53 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -30,11 +30,14 @@
 #include <linux/ethtool.h>
 #include <linux/phy.h>
 #include <linux/marvell_phy.h>
+#include <linux/of.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
+#define MII_MARVELL_PHY_PAGE		22
+
 #define MII_M1011_IEVENT		0x13
 #define MII_M1011_IEVENT_CLEAR		0x0000
 
@@ -80,7 +83,6 @@
 #define MII_88E1121_PHY_LED_CTRL	16
 #define MII_88E1121_PHY_LED_PAGE	3
 #define MII_88E1121_PHY_LED_DEF		0x0030
-#define MII_88E1121_PHY_PAGE		22
 
 #define MII_M1011_PHY_STATUS		0x11
 #define MII_M1011_PHY_STATUS_1000	0x8000
@@ -186,13 +188,94 @@
 	return 0;
 }
 
+#ifdef CONFIG_OF_MDIO
+/*
+ * Set and/or override some configuration registers based on the
+ * marvell,reg-init property stored in the of_node for the phydev.
+ *
+ * marvell,reg-init = <reg-page reg mask value>,...;
+ *
+ * There may be one or more sets of <reg-page reg mask value>:
+ *
+ * reg-page: which register bank to use.
+ * reg: the register.
+ * mask: if non-zero, ANDed with existing register value.
+ * value: ORed with the masked value and written to the regiser.
+ *
+ */
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+	const __be32 *paddr;
+	int len, i, saved_page, current_page, page_changed, ret;
+
+	if (!phydev->dev.of_node)
+		return 0;
+
+	paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len);
+	if (!paddr || len < (4 * sizeof(*paddr)))
+		return 0;
+
+	saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+	if (saved_page < 0)
+		return saved_page;
+	page_changed = 0;
+	current_page = saved_page;
+
+	ret = 0;
+	len /= sizeof(*paddr);
+	for (i = 0; i < len - 3; i += 4) {
+		u16 reg_page = be32_to_cpup(paddr + i);
+		u16 reg = be32_to_cpup(paddr + i + 1);
+		u16 mask = be32_to_cpup(paddr + i + 2);
+		u16 val_bits = be32_to_cpup(paddr + i + 3);
+		int val;
+
+		if (reg_page != current_page) {
+			current_page = reg_page;
+			page_changed = 1;
+			ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page);
+			if (ret < 0)
+				goto err;
+		}
+
+		val = 0;
+		if (mask) {
+			val = phy_read(phydev, reg);
+			if (val < 0) {
+				ret = val;
+				goto err;
+			}
+			val &= mask;
+		}
+		val |= val_bits;
+
+		ret = phy_write(phydev, reg, val);
+		if (ret < 0)
+			goto err;
+
+	}
+err:
+	if (page_changed) {
+		i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page);
+		if (ret == 0)
+			ret = i;
+	}
+	return ret;
+}
+#else
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+	return 0;
+}
+#endif /* CONFIG_OF_MDIO */
+
 static int m88e1121_config_aneg(struct phy_device *phydev)
 {
 	int err, oldpage, mscr;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE,
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
 			MII_88E1121_PHY_MSCR_PAGE);
 	if (err < 0)
 		return err;
@@ -218,7 +301,7 @@
 			return err;
 	}
 
-	phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 
 	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 	if (err < 0)
@@ -229,11 +312,11 @@
 	if (err < 0)
 		return err;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
 	phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
-	phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 
 	err = genphy_config_aneg(phydev);
 
@@ -244,9 +327,9 @@
 {
 	int err, oldpage, mscr;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE,
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
 			MII_88E1121_PHY_MSCR_PAGE);
 	if (err < 0)
 		return err;
@@ -258,7 +341,7 @@
 	if (err < 0)
 		return err;
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 	if (err < 0)
 		return err;
 
@@ -368,6 +451,9 @@
 			return err;
 	}
 
+	err = marvell_of_reg_init(phydev);
+	if (err < 0)
+		return err;
 
 	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 	if (err < 0)
@@ -398,7 +484,7 @@
 	int err;
 
 	/* Change address */
-	err = phy_write(phydev, 0x16, 0x0002);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
 	if (err < 0)
 		return err;
 
@@ -408,7 +494,7 @@
 		return err;
 
 	/* Change address */
-	err = phy_write(phydev, 0x16, 0x0003);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003);
 	if (err < 0)
 		return err;
 
@@ -420,8 +506,42 @@
 	if (err < 0)
 		return err;
 
+	err = marvell_of_reg_init(phydev);
+	if (err < 0)
+		return err;
+
 	/* Reset address */
-	err = phy_write(phydev, 0x16, 0x0);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int m88e1149_config_init(struct phy_device *phydev)
+{
+	int err;
+
+	/* Change address */
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
+	if (err < 0)
+		return err;
+
+	/* Enable 1000 Mbit */
+	err = phy_write(phydev, 0x15, 0x1048);
+	if (err < 0)
+		return err;
+
+	err = marvell_of_reg_init(phydev);
+	if (err < 0)
+		return err;
+
+	/* Reset address */
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
 	if (err < 0)
 		return err;
 
@@ -491,6 +611,10 @@
 		}
 	}
 
+	err = marvell_of_reg_init(phydev);
+	if (err < 0)
+		return err;
+
 	return 0;
 }
 
@@ -685,6 +809,19 @@
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
+		.phy_id = MARVELL_PHY_ID_88E1149R,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
+		.name = "Marvell 88E1149R",
+		.features = PHY_GBIT_FEATURES,
+		.flags = PHY_HAS_INTERRUPT,
+		.config_init = &m88e1149_config_init,
+		.config_aneg = &m88e1118_config_aneg,
+		.read_status = &genphy_read_status,
+		.ack_interrupt = &marvell_ack_interrupt,
+		.config_intr = &marvell_config_intr,
+		.driver = { .owner = THIS_MODULE },
+	},
+	{
 		.phy_id = MARVELL_PHY_ID_88E1240,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1240",
@@ -735,6 +872,7 @@
 	{ 0x01410e10, 0xfffffff0 },
 	{ 0x01410cb0, 0xfffffff0 },
 	{ 0x01410cd0, 0xfffffff0 },
+	{ 0x01410e50, 0xfffffff0 },
 	{ 0x01410e30, 0xfffffff0 },
 	{ 0x01410e90, 0xfffffff0 },
 	{ }
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index c30e0fe..528eaef 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -62,15 +62,15 @@
 /* NETIF_MSG_PKTDATA | */
     NETIF_MSG_HW | NETIF_MSG_WOL | 0;
 
-static int debug = 0x00007fff;	/* defaults above */
-module_param(debug, int, 0);
+static int debug = -1;	/* defaults above */
+module_param(debug, int, 0664);
 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 
 #define MSIX_IRQ 0
 #define MSI_IRQ 1
 #define LEG_IRQ 2
 static int qlge_irq_type = MSIX_IRQ;
-module_param(qlge_irq_type, int, MSIX_IRQ);
+module_param(qlge_irq_type, int, 0664);
 MODULE_PARM_DESC(qlge_irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
 
 static int qlge_mpi_coredump;
diff --git a/drivers/net/tile/Makefile b/drivers/net/tile/Makefile
new file mode 100644
index 0000000..f634f14
--- /dev/null
+++ b/drivers/net/tile/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the TILE on-chip networking support.
+#
+
+obj-$(CONFIG_TILE_NET) += tile_net.o
+ifdef CONFIG_TILEGX
+tile_net-objs := tilegx.o mpipe.o iorpc_mpipe.o dma_queue.o
+else
+tile_net-objs := tilepro.o
+endif
diff --git a/drivers/net/tile/tilepro.c b/drivers/net/tile/tilepro.c
new file mode 100644
index 0000000..0e6bac5
--- /dev/null
+++ b/drivers/net/tile/tilepro.c
@@ -0,0 +1,2406 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>      /* printk() */
+#include <linux/slab.h>        /* kmalloc() */
+#include <linux/errno.h>       /* error codes */
+#include <linux/types.h>       /* size_t */
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>   /* struct device, and other headers */
+#include <linux/etherdevice.h> /* eth_type_trans */
+#include <linux/skbuff.h>
+#include <linux/ioctl.h>
+#include <linux/cdev.h>
+#include <linux/hugetlb.h>
+#include <linux/in6.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <asm/checksum.h>
+#include <asm/homecache.h>
+
+#include <hv/drv_xgbe_intf.h>
+#include <hv/drv_xgbe_impl.h>
+#include <hv/hypervisor.h>
+#include <hv/netio_intf.h>
+
+/* For TSO */
+#include <linux/ip.h>
+#include <linux/tcp.h>
+
+
+/* There is no singlethread_cpu, so schedule work on the current cpu. */
+#define singlethread_cpu -1
+
+
+/*
+ * First, "tile_net_init_module()" initializes all four "devices" which
+ * can be used by linux.
+ *
+ * Then, "ifconfig DEVICE up" calls "tile_net_open()", which analyzes
+ * the network cpus, then uses "tile_net_open_aux()" to initialize
+ * LIPP/LEPP, and then uses "tile_net_open_inner()" to register all
+ * the tiles, provide buffers to LIPP, allow ingress to start, and
+ * turn on hypervisor interrupt handling (and NAPI) on all tiles.
+ *
+ * If registration fails due to the link being down, then "retry_work"
+ * is used to keep calling "tile_net_open_inner()" until it succeeds.
+ *
+ * If "ifconfig DEVICE down" is called, it uses "tile_net_stop()" to
+ * stop egress, drain the LIPP buffers, unregister all the tiles, stop
+ * LIPP/LEPP, and wipe the LEPP queue.
+ *
+ * We start out with the ingress interrupt enabled on each CPU.  When
+ * this interrupt fires, we disable it, and call "napi_schedule()".
+ * This will cause "tile_net_poll()" to be called, which will pull
+ * packets from the netio queue, filtering them out, or passing them
+ * to "netif_receive_skb()".  If our budget is exhausted, we will
+ * return, knowing we will be called again later.  Otherwise, we
+ * reenable the ingress interrupt, and call "napi_complete()".
+ *
+ *
+ * NOTE: The use of "native_driver" ensures that EPP exists, and that
+ * "epp_sendv" is legal, and that "LIPP" is being used.
+ *
+ * NOTE: Failing to free completions for an arbitrarily long time
+ * (which is defined to be illegal) does in fact cause bizarre
+ * problems.  The "egress_timer" helps prevent this from happening.
+ *
+ * NOTE: The egress code can be interrupted by the interrupt handler.
+ */
+
+
+/* HACK: Allow use of "jumbo" packets. */
+/* This should be 1500 if "jumbo" is not set in LIPP. */
+/* This should be at most 10226 (10240 - 14) if "jumbo" is set in LIPP. */
+/* ISSUE: This has not been thoroughly tested (except at 1500). */
+#define TILE_NET_MTU 1500
+
+/* HACK: Define to support GSO. */
+/* ISSUE: This may actually hurt performance of the TCP blaster. */
+/* #define TILE_NET_GSO */
+
+/* Define this to collapse "duplicate" acks. */
+/* #define IGNORE_DUP_ACKS */
+
+/* HACK: Define this to verify incoming packets. */
+/* #define TILE_NET_VERIFY_INGRESS */
+
+/* Use 3000 to enable the Linux Traffic Control (QoS) layer, else 0. */
+#define TILE_NET_TX_QUEUE_LEN 0
+
+/* Define to dump packets (prints out the whole packet on tx and rx). */
+/* #define TILE_NET_DUMP_PACKETS */
+
+/* Define to enable debug spew (all PDEBUG's are enabled). */
+/* #define TILE_NET_DEBUG */
+
+
+/* Define to activate paranoia checks. */
+/* #define TILE_NET_PARANOIA */
+
+/* Default transmit lockup timeout period, in jiffies. */
+#define TILE_NET_TIMEOUT (5 * HZ)
+
+/* Default retry interval for bringing up the NetIO interface, in jiffies. */
+#define TILE_NET_RETRY_INTERVAL (5 * HZ)
+
+/* Number of ports (xgbe0, xgbe1, gbe0, gbe1). */
+#define TILE_NET_DEVS 4
+
+
+
+/* Paranoia. */
+#if NET_IP_ALIGN != LIPP_PACKET_PADDING
+#error "NET_IP_ALIGN must match LIPP_PACKET_PADDING."
+#endif
+
+
+/* Debug print. */
+#ifdef TILE_NET_DEBUG
+#define PDEBUG(fmt, args...) net_printk(fmt, ## args)
+#else
+#define PDEBUG(fmt, args...)
+#endif
+
+
+MODULE_AUTHOR("Tilera");
+MODULE_LICENSE("GPL");
+
+
+#define IS_MULTICAST(mac_addr) \
+	(((u8 *)(mac_addr))[0] & 0x01)
+
+#define IS_BROADCAST(mac_addr) \
+	(((u16 *)(mac_addr))[0] == 0xffff)
+
+
+/*
+ * Queue of incoming packets for a specific cpu and device.
+ *
+ * Includes a pointer to the "system" data, and the actual "user" data.
+ */
+struct tile_netio_queue {
+	netio_queue_impl_t *__system_part;
+	netio_queue_user_impl_t __user_part;
+
+};
+
+
+/*
+ * Statistics counters for a specific cpu and device.
+ */
+struct tile_net_stats_t {
+	u32 rx_packets;
+	u32 rx_bytes;
+	u32 tx_packets;
+	u32 tx_bytes;
+};
+
+
+/*
+ * Info for a specific cpu and device.
+ *
+ * ISSUE: There is a "dev" pointer in "napi" as well.
+ */
+struct tile_net_cpu {
+	/* The NAPI struct. */
+	struct napi_struct napi;
+	/* Packet queue. */
+	struct tile_netio_queue queue;
+	/* Statistics. */
+	struct tile_net_stats_t stats;
+	/* ISSUE: Is this needed? */
+	bool napi_enabled;
+	/* True if this tile has succcessfully registered with the IPP. */
+	bool registered;
+	/* True if the link was down last time we tried to register. */
+	bool link_down;
+	/* True if "egress_timer" is scheduled. */
+	bool egress_timer_scheduled;
+	/* Number of small sk_buffs which must still be provided. */
+	unsigned int num_needed_small_buffers;
+	/* Number of large sk_buffs which must still be provided. */
+	unsigned int num_needed_large_buffers;
+	/* A timer for handling egress completions. */
+	struct timer_list egress_timer;
+};
+
+
+/*
+ * Info for a specific device.
+ */
+struct tile_net_priv {
+	/* Our network device. */
+	struct net_device *dev;
+	/* The actual egress queue. */
+	lepp_queue_t *epp_queue;
+	/* Protects "epp_queue->cmd_tail" and "epp_queue->comp_tail" */
+	spinlock_t cmd_lock;
+	/* Protects "epp_queue->comp_head". */
+	spinlock_t comp_lock;
+	/* The hypervisor handle for this interface. */
+	int hv_devhdl;
+	/* The intr bit mask that IDs this device. */
+	u32 intr_id;
+	/* True iff "tile_net_open_aux()" has succeeded. */
+	int partly_opened;
+	/* True iff "tile_net_open_inner()" has succeeded. */
+	int fully_opened;
+	/* Effective network cpus. */
+	struct cpumask network_cpus_map;
+	/* Number of network cpus. */
+	int network_cpus_count;
+	/* Credits per network cpu. */
+	int network_cpus_credits;
+	/* Network stats. */
+	struct net_device_stats stats;
+	/* For NetIO bringup retries. */
+	struct delayed_work retry_work;
+	/* Quick access to per cpu data. */
+	struct tile_net_cpu *cpu[NR_CPUS];
+};
+
+
+/*
+ * The actual devices (xgbe0, xgbe1, gbe0, gbe1).
+ */
+static struct net_device *tile_net_devs[TILE_NET_DEVS];
+
+/*
+ * The "tile_net_cpu" structures for each device.
+ */
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_xgbe0);
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_xgbe1);
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_gbe0);
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_gbe1);
+
+
+/*
+ * True if "network_cpus" was specified.
+ */
+static bool network_cpus_used;
+
+/*
+ * The actual cpus in "network_cpus".
+ */
+static struct cpumask network_cpus_map;
+
+
+
+#ifdef TILE_NET_DEBUG
+/*
+ * printk with extra stuff.
+ *
+ * We print the CPU we're running in brackets.
+ */
+static void net_printk(char *fmt, ...)
+{
+	int i;
+	int len;
+	va_list args;
+	static char buf[256];
+
+	len = sprintf(buf, "tile_net[%2.2d]: ", smp_processor_id());
+	va_start(args, fmt);
+	i = vscnprintf(buf + len, sizeof(buf) - len - 1, fmt, args);
+	va_end(args);
+	buf[255] = '\0';
+	pr_notice(buf);
+}
+#endif
+
+
+#ifdef TILE_NET_DUMP_PACKETS
+/*
+ * Dump a packet.
+ */
+static void dump_packet(unsigned char *data, unsigned long length, char *s)
+{
+	unsigned long i;
+	static unsigned int count;
+
+	pr_info("dump_packet(data %p, length 0x%lx s %s count 0x%x)\n",
+	       data, length, s, count++);
+
+	pr_info("\n");
+
+	for (i = 0; i < length; i++) {
+		if ((i & 0xf) == 0)
+			sprintf(buf, "%8.8lx:", i);
+		sprintf(buf + strlen(buf), " %2.2x", data[i]);
+		if ((i & 0xf) == 0xf || i == length - 1)
+			pr_info("%s\n", buf);
+	}
+}
+#endif
+
+
+/*
+ * Provide support for the __netio_fastio1() swint
+ * (see <hv/drv_xgbe_intf.h> for how it is used).
+ *
+ * The fastio swint2 call may clobber all the caller-saved registers.
+ * It rarely clobbers memory, but we allow for the possibility in
+ * the signature just to be on the safe side.
+ *
+ * Also, gcc doesn't seem to allow an input operand to be
+ * clobbered, so we fake it with dummy outputs.
+ *
+ * This function can't be static because of the way it is declared
+ * in the netio header.
+ */
+inline int __netio_fastio1(u32 fastio_index, u32 arg0)
+{
+	long result, clobber_r1, clobber_r10;
+	asm volatile("swint2"
+		     : "=R00" (result),
+		       "=R01" (clobber_r1), "=R10" (clobber_r10)
+		     : "R10" (fastio_index), "R01" (arg0)
+		     : "memory", "r2", "r3", "r4",
+		       "r5", "r6", "r7", "r8", "r9",
+		       "r11", "r12", "r13", "r14",
+		       "r15", "r16", "r17", "r18", "r19",
+		       "r20", "r21", "r22", "r23", "r24",
+		       "r25", "r26", "r27", "r28", "r29");
+	return result;
+}
+
+
+/*
+ * Provide a linux buffer to LIPP.
+ */
+static void tile_net_provide_linux_buffer(struct tile_net_cpu *info,
+					  void *va, bool small)
+{
+	struct tile_netio_queue *queue = &info->queue;
+
+	/* Convert "va" and "small" to "linux_buffer_t". */
+	unsigned int buffer = ((unsigned int)(__pa(va) >> 7) << 1) + small;
+
+	__netio_fastio_free_buffer(queue->__user_part.__fastio_index, buffer);
+}
+
+
+/*
+ * Provide a linux buffer for LIPP.
+ */
+static bool tile_net_provide_needed_buffer(struct tile_net_cpu *info,
+					   bool small)
+{
+	/* ISSUE: What should we use here? */
+	unsigned int large_size = NET_IP_ALIGN + TILE_NET_MTU + 100;
+
+	/* Round up to ensure to avoid "false sharing" with last cache line. */
+	unsigned int buffer_size =
+		 (((small ? LIPP_SMALL_PACKET_SIZE : large_size) +
+		   CHIP_L2_LINE_SIZE() - 1) & -CHIP_L2_LINE_SIZE());
+
+	/*
+	 * ISSUE: Since CPAs are 38 bits, and we can only encode the
+	 * high 31 bits in a "linux_buffer_t", the low 7 bits must be
+	 * zero, and thus, we must align the actual "va" mod 128.
+	 */
+	const unsigned long align = 128;
+
+	struct sk_buff *skb;
+	void *va;
+
+	struct sk_buff **skb_ptr;
+
+	/* Note that "dev_alloc_skb()" adds NET_SKB_PAD more bytes, */
+	/* and also "reserves" that many bytes. */
+	/* ISSUE: Can we "share" the NET_SKB_PAD bytes with "skb_ptr"? */
+	int len = sizeof(*skb_ptr) + align + buffer_size;
+
+	while (1) {
+
+		/* Allocate (or fail). */
+		skb = dev_alloc_skb(len);
+		if (skb == NULL)
+			return false;
+
+		/* Make room for a back-pointer to 'skb'. */
+		skb_reserve(skb, sizeof(*skb_ptr));
+
+		/* Make sure we are aligned. */
+		skb_reserve(skb, -(long)skb->data & (align - 1));
+
+		/* This address is given to IPP. */
+		va = skb->data;
+
+		if (small)
+			break;
+
+		/* ISSUE: This has never been observed! */
+		/* Large buffers must not span a huge page. */
+		if (((((long)va & ~HPAGE_MASK) + 1535) & HPAGE_MASK) == 0)
+			break;
+		pr_err("Leaking unaligned linux buffer at %p.\n", va);
+	}
+
+	/* Skip two bytes to satisfy LIPP assumptions. */
+	/* Note that this aligns IP on a 16 byte boundary. */
+	/* ISSUE: Do this when the packet arrives? */
+	skb_reserve(skb, NET_IP_ALIGN);
+
+	/* Save a back-pointer to 'skb'. */
+	skb_ptr = va - sizeof(*skb_ptr);
+	*skb_ptr = skb;
+
+	/* Invalidate the packet buffer. */
+	if (!hash_default)
+		__inv_buffer(skb->data, buffer_size);
+
+	/* Make sure "skb_ptr" has been flushed. */
+	__insn_mf();
+
+#ifdef TILE_NET_PARANOIA
+#if CHIP_HAS_CBOX_HOME_MAP()
+	if (hash_default) {
+		HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)va);
+		if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3)
+			panic("Non-coherent ingress buffer!");
+	}
+#endif
+#endif
+
+	/* Provide the new buffer. */
+	tile_net_provide_linux_buffer(info, va, small);
+
+	return true;
+}
+
+
+/*
+ * Provide linux buffers for LIPP.
+ */
+static void tile_net_provide_needed_buffers(struct tile_net_cpu *info)
+{
+	while (info->num_needed_small_buffers != 0) {
+		if (!tile_net_provide_needed_buffer(info, true))
+			goto oops;
+		info->num_needed_small_buffers--;
+	}
+
+	while (info->num_needed_large_buffers != 0) {
+		if (!tile_net_provide_needed_buffer(info, false))
+			goto oops;
+		info->num_needed_large_buffers--;
+	}
+
+	return;
+
+oops:
+
+	/* Add a description to the page allocation failure dump. */
+	pr_notice("Could not provide a linux buffer to LIPP.\n");
+}
+
+
+/*
+ * Grab some LEPP completions, and store them in "comps", of size
+ * "comps_size", and return the number of completions which were
+ * stored, so the caller can free them.
+ *
+ * If "pending" is not NULL, it will be set to true if there might
+ * still be some pending completions caused by this tile, else false.
+ */
+static unsigned int tile_net_lepp_grab_comps(struct net_device *dev,
+					     struct sk_buff *comps[],
+					     unsigned int comps_size,
+					     bool *pending)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	lepp_queue_t *eq = priv->epp_queue;
+
+	unsigned int n = 0;
+
+	unsigned int comp_head;
+	unsigned int comp_busy;
+	unsigned int comp_tail;
+
+	spin_lock(&priv->comp_lock);
+
+	comp_head = eq->comp_head;
+	comp_busy = eq->comp_busy;
+	comp_tail = eq->comp_tail;
+
+	while (comp_head != comp_busy && n < comps_size) {
+		comps[n++] = eq->comps[comp_head];
+		LEPP_QINC(comp_head);
+	}
+
+	if (pending != NULL)
+		*pending = (comp_head != comp_tail);
+
+	eq->comp_head = comp_head;
+
+	spin_unlock(&priv->comp_lock);
+
+	return n;
+}
+
+
+/*
+ * Make sure the egress timer is scheduled.
+ *
+ * Note that we use "schedule if not scheduled" logic instead of the more
+ * obvious "reschedule" logic, because "reschedule" is fairly expensive.
+ */
+static void tile_net_schedule_egress_timer(struct tile_net_cpu *info)
+{
+	if (!info->egress_timer_scheduled) {
+		mod_timer_pinned(&info->egress_timer, jiffies + 1);
+		info->egress_timer_scheduled = true;
+	}
+}
+
+
+/*
+ * The "function" for "info->egress_timer".
+ *
+ * This timer will reschedule itself as long as there are any pending
+ * completions expected (on behalf of any tile).
+ *
+ * ISSUE: Realistically, will the timer ever stop scheduling itself?
+ *
+ * ISSUE: This timer is almost never actually needed, so just use a global
+ * timer that can run on any tile.
+ *
+ * ISSUE: Maybe instead track number of expected completions, and free
+ * only that many, resetting to zero if "pending" is ever false.
+ */
+static void tile_net_handle_egress_timer(unsigned long arg)
+{
+	struct tile_net_cpu *info = (struct tile_net_cpu *)arg;
+	struct net_device *dev = info->napi.dev;
+
+	struct sk_buff *olds[32];
+	unsigned int wanted = 32;
+	unsigned int i, nolds = 0;
+	bool pending;
+
+	/* The timer is no longer scheduled. */
+	info->egress_timer_scheduled = false;
+
+	nolds = tile_net_lepp_grab_comps(dev, olds, wanted, &pending);
+
+	for (i = 0; i < nolds; i++)
+		kfree_skb(olds[i]);
+
+	/* Reschedule timer if needed. */
+	if (pending)
+		tile_net_schedule_egress_timer(info);
+}
+
+
+#ifdef IGNORE_DUP_ACKS
+
+/*
+ * Help detect "duplicate" ACKs.  These are sequential packets (for a
+ * given flow) which are exactly 66 bytes long, sharing everything but
+ * ID=2@0x12, Hsum=2@0x18, Ack=4@0x2a, WinSize=2@0x30, Csum=2@0x32,
+ * Tstamps=10@0x38.  The ID's are +1, the Hsum's are -1, the Ack's are
+ * +N, and the Tstamps are usually identical.
+ *
+ * NOTE: Apparently truly duplicate acks (with identical "ack" values),
+ * should not be collapsed, as they are used for some kind of flow control.
+ */
+static bool is_dup_ack(char *s1, char *s2, unsigned int len)
+{
+	int i;
+
+	unsigned long long ignorable = 0;
+
+	/* Identification. */
+	ignorable |= (1ULL << 0x12);
+	ignorable |= (1ULL << 0x13);
+
+	/* Header checksum. */
+	ignorable |= (1ULL << 0x18);
+	ignorable |= (1ULL << 0x19);
+
+	/* ACK. */
+	ignorable |= (1ULL << 0x2a);
+	ignorable |= (1ULL << 0x2b);
+	ignorable |= (1ULL << 0x2c);
+	ignorable |= (1ULL << 0x2d);
+
+	/* WinSize. */
+	ignorable |= (1ULL << 0x30);
+	ignorable |= (1ULL << 0x31);
+
+	/* Checksum. */
+	ignorable |= (1ULL << 0x32);
+	ignorable |= (1ULL << 0x33);
+
+	for (i = 0; i < len; i++, ignorable >>= 1) {
+
+		if ((ignorable & 1) || (s1[i] == s2[i]))
+			continue;
+
+#ifdef TILE_NET_DEBUG
+		/* HACK: Mention non-timestamp diffs. */
+		if (i < 0x38 && i != 0x2f &&
+		    net_ratelimit())
+			pr_info("Diff at 0x%x\n", i);
+#endif
+
+		return false;
+	}
+
+#ifdef TILE_NET_NO_SUPPRESS_DUP_ACKS
+	/* HACK: Do not suppress truly duplicate ACKs. */
+	/* ISSUE: Is this actually necessary or helpful? */
+	if (s1[0x2a] == s2[0x2a] &&
+	    s1[0x2b] == s2[0x2b] &&
+	    s1[0x2c] == s2[0x2c] &&
+	    s1[0x2d] == s2[0x2d]) {
+		return false;
+	}
+#endif
+
+	return true;
+}
+
+#endif
+
+
+
+/*
+ * Like "tile_net_handle_packets()", but just discard packets.
+ */
+static void tile_net_discard_packets(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+	struct tile_netio_queue *queue = &info->queue;
+	netio_queue_impl_t *qsp = queue->__system_part;
+	netio_queue_user_impl_t *qup = &queue->__user_part;
+
+	while (qup->__packet_receive_read !=
+	       qsp->__packet_receive_queue.__packet_write) {
+
+		int index = qup->__packet_receive_read;
+
+		int index2_aux = index + sizeof(netio_pkt_t);
+		int index2 =
+			((index2_aux ==
+			  qsp->__packet_receive_queue.__last_packet_plus_one) ?
+			 0 : index2_aux);
+
+		netio_pkt_t *pkt = (netio_pkt_t *)
+			((unsigned long) &qsp[1] + index);
+
+		/* Extract the "linux_buffer_t". */
+		unsigned int buffer = pkt->__packet.word;
+
+		/* Convert "linux_buffer_t" to "va". */
+		void *va = __va((phys_addr_t)(buffer >> 1) << 7);
+
+		/* Acquire the associated "skb". */
+		struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+		struct sk_buff *skb = *skb_ptr;
+
+		kfree_skb(skb);
+
+		/* Consume this packet. */
+		qup->__packet_receive_read = index2;
+	}
+}
+
+
+/*
+ * Handle the next packet.  Return true if "processed", false if "filtered".
+ */
+static bool tile_net_poll_aux(struct tile_net_cpu *info, int index)
+{
+	struct net_device *dev = info->napi.dev;
+
+	struct tile_netio_queue *queue = &info->queue;
+	netio_queue_impl_t *qsp = queue->__system_part;
+	netio_queue_user_impl_t *qup = &queue->__user_part;
+	struct tile_net_stats_t *stats = &info->stats;
+
+	int filter;
+
+	int index2_aux = index + sizeof(netio_pkt_t);
+	int index2 =
+		((index2_aux ==
+		  qsp->__packet_receive_queue.__last_packet_plus_one) ?
+		 0 : index2_aux);
+
+	netio_pkt_t *pkt = (netio_pkt_t *)((unsigned long) &qsp[1] + index);
+
+	netio_pkt_metadata_t *metadata = NETIO_PKT_METADATA(pkt);
+
+	/* Extract the packet size. */
+	unsigned long len =
+		(NETIO_PKT_CUSTOM_LENGTH(pkt) +
+		 NET_IP_ALIGN - NETIO_PACKET_PADDING);
+
+	/* Extract the "linux_buffer_t". */
+	unsigned int buffer = pkt->__packet.word;
+
+	/* Extract "small" (vs "large"). */
+	bool small = ((buffer & 1) != 0);
+
+	/* Convert "linux_buffer_t" to "va". */
+	void *va = __va((phys_addr_t)(buffer >> 1) << 7);
+
+	/* Extract the packet data pointer. */
+	/* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */
+	unsigned char *buf = va + NET_IP_ALIGN;
+
+#ifdef IGNORE_DUP_ACKS
+
+	static int other;
+	static int final;
+	static int keep;
+	static int skip;
+
+#endif
+
+	/* Invalidate the packet buffer. */
+	if (!hash_default)
+		__inv_buffer(buf, len);
+
+	/* ISSUE: Is this needed? */
+	dev->last_rx = jiffies;
+
+#ifdef TILE_NET_DUMP_PACKETS
+	dump_packet(buf, len, "rx");
+#endif /* TILE_NET_DUMP_PACKETS */
+
+#ifdef TILE_NET_VERIFY_INGRESS
+	if (!NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt) &&
+	    NETIO_PKT_L4_CSUM_CALCULATED_M(metadata, pkt)) {
+		/*
+		 * FIXME: This complains about UDP packets
+		 * with a "zero" checksum (bug 6624).
+		 */
+#ifdef TILE_NET_PANIC_ON_BAD
+		dump_packet(buf, len, "rx");
+		panic("Bad L4 checksum.");
+#else
+		pr_warning("Bad L4 checksum on %d byte packet.\n", len);
+#endif
+	}
+	if (!NETIO_PKT_L3_CSUM_CORRECT_M(metadata, pkt) &&
+	    NETIO_PKT_L3_CSUM_CALCULATED_M(metadata, pkt)) {
+		dump_packet(buf, len, "rx");
+		panic("Bad L3 checksum.");
+	}
+	switch (NETIO_PKT_STATUS_M(metadata, pkt)) {
+	case NETIO_PKT_STATUS_OVERSIZE:
+		if (len >= 64) {
+			dump_packet(buf, len, "rx");
+			panic("Unexpected OVERSIZE.");
+		}
+		break;
+	case NETIO_PKT_STATUS_BAD:
+#ifdef TILE_NET_PANIC_ON_BAD
+		dump_packet(buf, len, "rx");
+		panic("Unexpected BAD packet.");
+#else
+		pr_warning("Unexpected BAD %d byte packet.\n", len);
+#endif
+	}
+#endif
+
+	filter = 0;
+
+	if (!(dev->flags & IFF_UP)) {
+		/* Filter packets received before we're up. */
+		filter = 1;
+	} else if (!(dev->flags & IFF_PROMISC)) {
+		/*
+		 * FIXME: Implement HW multicast filter.
+		 */
+		if (!IS_MULTICAST(buf) && !IS_BROADCAST(buf)) {
+			/* Filter packets not for our address. */
+			const u8 *mine = dev->dev_addr;
+			filter = compare_ether_addr(mine, buf);
+		}
+	}
+
+#ifdef IGNORE_DUP_ACKS
+
+	if (len != 66) {
+		/* FIXME: Must check "is_tcp_ack(buf, len)" somehow. */
+
+		other++;
+
+	} else if (index2 ==
+		   qsp->__packet_receive_queue.__packet_write) {
+
+		final++;
+
+	} else {
+
+		netio_pkt_t *pkt2 = (netio_pkt_t *)
+			((unsigned long) &qsp[1] + index2);
+
+		netio_pkt_metadata_t *metadata2 =
+			NETIO_PKT_METADATA(pkt2);
+
+		/* Extract the packet size. */
+		unsigned long len2 =
+			(NETIO_PKT_CUSTOM_LENGTH(pkt2) +
+			 NET_IP_ALIGN - NETIO_PACKET_PADDING);
+
+		if (len2 == 66 &&
+		    NETIO_PKT_FLOW_HASH_M(metadata, pkt) ==
+		    NETIO_PKT_FLOW_HASH_M(metadata2, pkt2)) {
+
+			/* Extract the "linux_buffer_t". */
+			unsigned int buffer2 = pkt2->__packet.word;
+
+			/* Convert "linux_buffer_t" to "va". */
+			void *va2 =
+				__va((phys_addr_t)(buffer2 >> 1) << 7);
+
+			/* Extract the packet data pointer. */
+			/* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */
+			unsigned char *buf2 = va2 + NET_IP_ALIGN;
+
+			/* Invalidate the packet buffer. */
+			if (!hash_default)
+				__inv_buffer(buf2, len2);
+
+			if (is_dup_ack(buf, buf2, len)) {
+				skip++;
+				filter = 1;
+			} else {
+				keep++;
+			}
+		}
+	}
+
+	if (net_ratelimit())
+		pr_info("Other %d Final %d Keep %d Skip %d.\n",
+			other, final, keep, skip);
+
+#endif
+
+	if (filter) {
+
+		/* ISSUE: Update "drop" statistics? */
+
+		tile_net_provide_linux_buffer(info, va, small);
+
+	} else {
+
+		/* Acquire the associated "skb". */
+		struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+		struct sk_buff *skb = *skb_ptr;
+
+		/* Paranoia. */
+		if (skb->data != buf)
+			panic("Corrupt linux buffer from LIPP! "
+			      "VA=%p, skb=%p, skb->data=%p\n",
+			      va, skb, skb->data);
+
+		/* Encode the actual packet length. */
+		skb_put(skb, len);
+
+		/* NOTE: This call also sets "skb->dev = dev". */
+		skb->protocol = eth_type_trans(skb, dev);
+
+		/* ISSUE: Discard corrupt packets? */
+		/* ISSUE: Discard packets with bad checksums? */
+
+		/* Avoid recomputing TCP/UDP checksums. */
+		if (NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt))
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+		netif_receive_skb(skb);
+
+		stats->rx_packets++;
+		stats->rx_bytes += len;
+
+		if (small)
+			info->num_needed_small_buffers++;
+		else
+			info->num_needed_large_buffers++;
+	}
+
+	/* Return four credits after every fourth packet. */
+	if (--qup->__receive_credit_remaining == 0) {
+		u32 interval = qup->__receive_credit_interval;
+		qup->__receive_credit_remaining = interval;
+		__netio_fastio_return_credits(qup->__fastio_index, interval);
+	}
+
+	/* Consume this packet. */
+	qup->__packet_receive_read = index2;
+
+	return !filter;
+}
+
+
+/*
+ * Handle some packets for the given device on the current CPU.
+ *
+ * ISSUE: The "rotting packet" race condition occurs if a packet
+ * arrives after the queue appears to be empty, and before the
+ * hypervisor interrupt is re-enabled.
+ */
+static int tile_net_poll(struct napi_struct *napi, int budget)
+{
+	struct net_device *dev = napi->dev;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+	struct tile_netio_queue *queue = &info->queue;
+	netio_queue_impl_t *qsp = queue->__system_part;
+	netio_queue_user_impl_t *qup = &queue->__user_part;
+
+	unsigned int work = 0;
+
+	while (1) {
+		int index = qup->__packet_receive_read;
+		if (index == qsp->__packet_receive_queue.__packet_write)
+			break;
+
+		if (tile_net_poll_aux(info, index)) {
+			if (++work >= budget)
+				goto done;
+		}
+	}
+
+	napi_complete(&info->napi);
+
+	/* Re-enable hypervisor interrupts. */
+	enable_percpu_irq(priv->intr_id);
+
+	/* HACK: Avoid the "rotting packet" problem. */
+	if (qup->__packet_receive_read !=
+	    qsp->__packet_receive_queue.__packet_write)
+		napi_schedule(&info->napi);
+
+	/* ISSUE: Handle completions? */
+
+done:
+
+	tile_net_provide_needed_buffers(info);
+
+	return work;
+}
+
+
+/*
+ * Handle an ingress interrupt for the given device on the current cpu.
+ */
+static irqreturn_t tile_net_handle_ingress_interrupt(int irq, void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+	/* Disable hypervisor interrupt. */
+	disable_percpu_irq(priv->intr_id);
+
+	napi_schedule(&info->napi);
+
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * One time initialization per interface.
+ */
+static int tile_net_open_aux(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	int ret;
+	int dummy;
+	unsigned int epp_lotar;
+
+	/*
+	 * Find out where EPP memory should be homed.
+	 */
+	ret = hv_dev_pread(priv->hv_devhdl, 0,
+			   (HV_VirtAddr)&epp_lotar, sizeof(epp_lotar),
+			   NETIO_EPP_SHM_OFF);
+	if (ret < 0) {
+		pr_err("could not read epp_shm_queue lotar.\n");
+		return -EIO;
+	}
+
+	/*
+	 * Home the page on the EPP.
+	 */
+	{
+		int epp_home = hv_lotar_to_cpu(epp_lotar);
+		struct page *page = virt_to_page(priv->epp_queue);
+		homecache_change_page_home(page, 0, epp_home);
+	}
+
+	/*
+	 * Register the EPP shared memory queue.
+	 */
+	{
+		netio_ipp_address_t ea = {
+			.va = 0,
+			.pa = __pa(priv->epp_queue),
+			.pte = hv_pte(0),
+			.size = PAGE_SIZE,
+		};
+		ea.pte = hv_pte_set_lotar(ea.pte, epp_lotar);
+		ea.pte = hv_pte_set_mode(ea.pte, HV_PTE_MODE_CACHE_TILE_L3);
+		ret = hv_dev_pwrite(priv->hv_devhdl, 0,
+				    (HV_VirtAddr)&ea,
+				    sizeof(ea),
+				    NETIO_EPP_SHM_OFF);
+		if (ret < 0)
+			return -EIO;
+	}
+
+	/*
+	 * Start LIPP/LEPP.
+	 */
+	if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+			  sizeof(dummy), NETIO_IPP_START_SHIM_OFF) < 0) {
+		pr_warning("Failed to start LIPP/LEPP.\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+
+/*
+ * Register with hypervisor on each CPU.
+ *
+ * Strangely, this function does important things even if it "fails",
+ * which is especially common if the link is not up yet.  Hopefully
+ * these things are all "harmless" if done twice!
+ */
+static void tile_net_register(void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info;
+
+	struct tile_netio_queue *queue;
+
+	/* Only network cpus can receive packets. */
+	int queue_id =
+		cpumask_test_cpu(my_cpu, &priv->network_cpus_map) ? 0 : 255;
+
+	netio_input_config_t config = {
+		.flags = 0,
+		.num_receive_packets = priv->network_cpus_credits,
+		.queue_id = queue_id
+	};
+
+	int ret = 0;
+	netio_queue_impl_t *queuep;
+
+	PDEBUG("tile_net_register(queue_id %d)\n", queue_id);
+
+	if (!strcmp(dev->name, "xgbe0"))
+		info = &__get_cpu_var(hv_xgbe0);
+	else if (!strcmp(dev->name, "xgbe1"))
+		info = &__get_cpu_var(hv_xgbe1);
+	else if (!strcmp(dev->name, "gbe0"))
+		info = &__get_cpu_var(hv_gbe0);
+	else if (!strcmp(dev->name, "gbe1"))
+		info = &__get_cpu_var(hv_gbe1);
+	else
+		BUG();
+
+	/* Initialize the egress timer. */
+	init_timer(&info->egress_timer);
+	info->egress_timer.data = (long)info;
+	info->egress_timer.function = tile_net_handle_egress_timer;
+
+	priv->cpu[my_cpu] = info;
+
+	/*
+	 * Register ourselves with the IPP.
+	 */
+	ret = hv_dev_pwrite(priv->hv_devhdl, 0,
+			    (HV_VirtAddr)&config,
+			    sizeof(netio_input_config_t),
+			    NETIO_IPP_INPUT_REGISTER_OFF);
+	PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_REGISTER_OFF) returned %d\n",
+	       ret);
+	if (ret < 0) {
+		printk(KERN_DEBUG "hv_dev_pwrite NETIO_IPP_INPUT_REGISTER_OFF"
+		       " failure %d\n", ret);
+		info->link_down = (ret == NETIO_LINK_DOWN);
+		return;
+	}
+
+	/*
+	 * Get the pointer to our queue's system part.
+	 */
+
+	ret = hv_dev_pread(priv->hv_devhdl, 0,
+			   (HV_VirtAddr)&queuep,
+			   sizeof(netio_queue_impl_t *),
+			   NETIO_IPP_INPUT_REGISTER_OFF);
+	PDEBUG("hv_dev_pread(NETIO_IPP_INPUT_REGISTER_OFF) returned %d\n",
+	       ret);
+	PDEBUG("queuep %p\n", queuep);
+	if (ret <= 0) {
+		/* ISSUE: Shouldn't this be a fatal error? */
+		pr_err("hv_dev_pread NETIO_IPP_INPUT_REGISTER_OFF failure\n");
+		return;
+	}
+
+	queue = &info->queue;
+
+	queue->__system_part = queuep;
+
+	memset(&queue->__user_part, 0, sizeof(netio_queue_user_impl_t));
+
+	/* This is traditionally "config.num_receive_packets / 2". */
+	queue->__user_part.__receive_credit_interval = 4;
+	queue->__user_part.__receive_credit_remaining =
+		queue->__user_part.__receive_credit_interval;
+
+	/*
+	 * Get a fastio index from the hypervisor.
+	 * ISSUE: Shouldn't this check the result?
+	 */
+	ret = hv_dev_pread(priv->hv_devhdl, 0,
+			   (HV_VirtAddr)&queue->__user_part.__fastio_index,
+			   sizeof(queue->__user_part.__fastio_index),
+			   NETIO_IPP_GET_FASTIO_OFF);
+	PDEBUG("hv_dev_pread(NETIO_IPP_GET_FASTIO_OFF) returned %d\n", ret);
+
+	netif_napi_add(dev, &info->napi, tile_net_poll, 64);
+
+	/* Now we are registered. */
+	info->registered = true;
+}
+
+
+/*
+ * Unregister with hypervisor on each CPU.
+ */
+static void tile_net_unregister(void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+	int ret = 0;
+	int dummy = 0;
+
+	/* Do nothing if never registered. */
+	if (info == NULL)
+		return;
+
+	/* Do nothing if already unregistered. */
+	if (!info->registered)
+		return;
+
+	/*
+	 * Unregister ourselves with LIPP.
+	 */
+	ret = hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+			    sizeof(dummy), NETIO_IPP_INPUT_UNREGISTER_OFF);
+	PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_UNREGISTER_OFF) returned %d\n",
+	       ret);
+	if (ret < 0) {
+		/* FIXME: Just panic? */
+		pr_err("hv_dev_pwrite NETIO_IPP_INPUT_UNREGISTER_OFF"
+		       " failure %d\n", ret);
+	}
+
+	/*
+	 * Discard all packets still in our NetIO queue.  Hopefully,
+	 * once the unregister call is complete, there will be no
+	 * packets still in flight on the IDN.
+	 */
+	tile_net_discard_packets(dev);
+
+	/* Reset state. */
+	info->num_needed_small_buffers = 0;
+	info->num_needed_large_buffers = 0;
+
+	/* Cancel egress timer. */
+	del_timer(&info->egress_timer);
+	info->egress_timer_scheduled = false;
+
+	netif_napi_del(&info->napi);
+
+	/* Now we are unregistered. */
+	info->registered = false;
+}
+
+
+/*
+ * Helper function for "tile_net_stop()".
+ *
+ * Also used to handle registration failure in "tile_net_open_inner()",
+ * when "fully_opened" is known to be false, and the various extra
+ * steps in "tile_net_stop()" are not necessary.  ISSUE: It might be
+ * simpler if we could just call "tile_net_stop()" anyway.
+ */
+static void tile_net_stop_aux(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	int dummy = 0;
+
+	/* Unregister all tiles, so LIPP will stop delivering packets. */
+	on_each_cpu(tile_net_unregister, (void *)dev, 1);
+
+	/* Stop LIPP/LEPP. */
+	if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+			  sizeof(dummy), NETIO_IPP_STOP_SHIM_OFF) < 0)
+		panic("Failed to stop LIPP/LEPP!\n");
+
+	priv->partly_opened = 0;
+}
+
+
+/*
+ * Disable ingress interrupts for the given device on the current cpu.
+ */
+static void tile_net_disable_intr(void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+	/* Disable hypervisor interrupt. */
+	disable_percpu_irq(priv->intr_id);
+
+	/* Disable NAPI if needed. */
+	if (info != NULL && info->napi_enabled) {
+		napi_disable(&info->napi);
+		info->napi_enabled = false;
+	}
+}
+
+
+/*
+ * Enable ingress interrupts for the given device on the current cpu.
+ */
+static void tile_net_enable_intr(void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+	/* Enable hypervisor interrupt. */
+	enable_percpu_irq(priv->intr_id);
+
+	/* Enable NAPI. */
+	napi_enable(&info->napi);
+	info->napi_enabled = true;
+}
+
+
+/*
+ * tile_net_open_inner does most of the work of bringing up the interface.
+ * It's called from tile_net_open(), and also from tile_net_retry_open().
+ * The return value is 0 if the interface was brought up, < 0 if
+ * tile_net_open() should return the return value as an error, and > 0 if
+ * tile_net_open() should return success and schedule a work item to
+ * periodically retry the bringup.
+ */
+static int tile_net_open_inner(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info;
+	struct tile_netio_queue *queue;
+	unsigned int irq;
+	int i;
+
+	/*
+	 * First try to register just on the local CPU, and handle any
+	 * semi-expected "link down" failure specially.  Note that we
+	 * do NOT call "tile_net_stop_aux()", unlike below.
+	 */
+	tile_net_register(dev);
+	info = priv->cpu[my_cpu];
+	if (!info->registered) {
+		if (info->link_down)
+			return 1;
+		return -EAGAIN;
+	}
+
+	/*
+	 * Now register everywhere else.  If any registration fails,
+	 * even for "link down" (which might not be possible), we
+	 * clean up using "tile_net_stop_aux()".
+	 */
+	smp_call_function(tile_net_register, (void *)dev, 1);
+	for_each_online_cpu(i) {
+		if (!priv->cpu[i]->registered) {
+			tile_net_stop_aux(dev);
+			return -EAGAIN;
+		}
+	}
+
+	queue = &info->queue;
+
+	/*
+	 * Set the device intr bit mask.
+	 * The tile_net_register above sets per tile __intr_id.
+	 */
+	priv->intr_id = queue->__system_part->__intr_id;
+	BUG_ON(!priv->intr_id);
+
+	/*
+	 * Register the device interrupt handler.
+	 * The __ffs() function returns the index into the interrupt handler
+	 * table from the interrupt bit mask which should have one bit
+	 * and one bit only set.
+	 */
+	irq = __ffs(priv->intr_id);
+	tile_irq_activate(irq, TILE_IRQ_PERCPU);
+	BUG_ON(request_irq(irq, tile_net_handle_ingress_interrupt,
+			   0, dev->name, (void *)dev) != 0);
+
+	/* ISSUE: How could "priv->fully_opened" ever be "true" here? */
+
+	if (!priv->fully_opened) {
+
+		int dummy = 0;
+
+		/* Allocate initial buffers. */
+
+		int max_buffers =
+			priv->network_cpus_count * priv->network_cpus_credits;
+
+		info->num_needed_small_buffers =
+			min(LIPP_SMALL_BUFFERS, max_buffers);
+
+		info->num_needed_large_buffers =
+			min(LIPP_LARGE_BUFFERS, max_buffers);
+
+		tile_net_provide_needed_buffers(info);
+
+		if (info->num_needed_small_buffers != 0 ||
+		    info->num_needed_large_buffers != 0)
+			panic("Insufficient memory for buffer stack!");
+
+		/* Start LIPP/LEPP and activate "ingress" at the shim. */
+		if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+				  sizeof(dummy), NETIO_IPP_INPUT_INIT_OFF) < 0)
+			panic("Failed to activate the LIPP Shim!\n");
+
+		priv->fully_opened = 1;
+	}
+
+	/* On each tile, enable the hypervisor to trigger interrupts. */
+	/* ISSUE: Do this before starting LIPP/LEPP? */
+	on_each_cpu(tile_net_enable_intr, (void *)dev, 1);
+
+	/* Start our transmit queue. */
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+
+/*
+ * Called periodically to retry bringing up the NetIO interface,
+ * if it doesn't come up cleanly during tile_net_open().
+ */
+static void tile_net_open_retry(struct work_struct *w)
+{
+	struct delayed_work *dw =
+		container_of(w, struct delayed_work, work);
+
+	struct tile_net_priv *priv =
+		container_of(dw, struct tile_net_priv, retry_work);
+
+	/*
+	 * Try to bring the NetIO interface up.  If it fails, reschedule
+	 * ourselves to try again later; otherwise, tell Linux we now have
+	 * a working link.  ISSUE: What if the return value is negative?
+	 */
+	if (tile_net_open_inner(priv->dev))
+		schedule_delayed_work_on(singlethread_cpu, &priv->retry_work,
+					 TILE_NET_RETRY_INTERVAL);
+	else
+		netif_carrier_on(priv->dev);
+}
+
+
+/*
+ * Called when a network interface is made active.
+ *
+ * Returns 0 on success, negative value on failure.
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP).  At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ *
+ * If the actual link is not available yet, then we tell Linux that
+ * we have no carrier, and we keep checking until the link comes up.
+ */
+static int tile_net_open(struct net_device *dev)
+{
+	int ret = 0;
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	/*
+	 * We rely on priv->partly_opened to tell us if this is the
+	 * first time this interface is being brought up. If it is
+	 * set, the IPP was already initialized and should not be
+	 * initialized again.
+	 */
+	if (!priv->partly_opened) {
+
+		int count;
+		int credits;
+
+		/* Initialize LIPP/LEPP, and start the Shim. */
+		ret = tile_net_open_aux(dev);
+		if (ret < 0) {
+			pr_err("tile_net_open_aux failed: %d\n", ret);
+			return ret;
+		}
+
+		/* Analyze the network cpus. */
+
+		if (network_cpus_used)
+			cpumask_copy(&priv->network_cpus_map,
+				     &network_cpus_map);
+		else
+			cpumask_copy(&priv->network_cpus_map, cpu_online_mask);
+
+
+		count = cpumask_weight(&priv->network_cpus_map);
+
+		/* Limit credits to available buffers, and apply min. */
+		credits = max(16, (LIPP_LARGE_BUFFERS / count) & ~1);
+
+		/* Apply "GBE" max limit. */
+		/* ISSUE: Use higher limit for XGBE? */
+		credits = min(NETIO_MAX_RECEIVE_PKTS, credits);
+
+		priv->network_cpus_count = count;
+		priv->network_cpus_credits = credits;
+
+#ifdef TILE_NET_DEBUG
+		pr_info("Using %d network cpus, with %d credits each\n",
+		       priv->network_cpus_count, priv->network_cpus_credits);
+#endif
+
+		priv->partly_opened = 1;
+	}
+
+	/*
+	 * Attempt to bring up the link.
+	 */
+	ret = tile_net_open_inner(dev);
+	if (ret <= 0) {
+		if (ret == 0)
+			netif_carrier_on(dev);
+		return ret;
+	}
+
+	/*
+	 * We were unable to bring up the NetIO interface, but we want to
+	 * try again in a little bit.  Tell Linux that we have no carrier
+	 * so it doesn't try to use the interface before the link comes up
+	 * and then remember to try again later.
+	 */
+	netif_carrier_off(dev);
+	schedule_delayed_work_on(singlethread_cpu, &priv->retry_work,
+				 TILE_NET_RETRY_INTERVAL);
+
+	return 0;
+}
+
+
+/*
+ * Disables a network interface.
+ *
+ * Returns 0, this is not allowed to fail.
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS.  The hardware is still under the drivers control, but
+ * needs to be disabled.  A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ *
+ * ISSUE: Can this can be called while "tile_net_poll()" is running?
+ */
+static int tile_net_stop(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	bool pending = true;
+
+	PDEBUG("tile_net_stop()\n");
+
+	/* ISSUE: Only needed if not yet fully open. */
+	cancel_delayed_work_sync(&priv->retry_work);
+
+	/* Can't transmit any more. */
+	netif_stop_queue(dev);
+
+	/*
+	 * Disable hypervisor interrupts on each tile.
+	 */
+	on_each_cpu(tile_net_disable_intr, (void *)dev, 1);
+
+	/*
+	 * Unregister the interrupt handler.
+	 * The __ffs() function returns the index into the interrupt handler
+	 * table from the interrupt bit mask which should have one bit
+	 * and one bit only set.
+	 */
+	if (priv->intr_id)
+		free_irq(__ffs(priv->intr_id), dev);
+
+	/*
+	 * Drain all the LIPP buffers.
+	 */
+
+	while (true) {
+		int buffer;
+
+		/* NOTE: This should never fail. */
+		if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&buffer,
+				 sizeof(buffer), NETIO_IPP_DRAIN_OFF) < 0)
+			break;
+
+		/* Stop when done. */
+		if (buffer == 0)
+			break;
+
+		{
+			/* Convert "linux_buffer_t" to "va". */
+			void *va = __va((phys_addr_t)(buffer >> 1) << 7);
+
+			/* Acquire the associated "skb". */
+			struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+			struct sk_buff *skb = *skb_ptr;
+
+			kfree_skb(skb);
+		}
+	}
+
+	/* Stop LIPP/LEPP. */
+	tile_net_stop_aux(dev);
+
+
+	priv->fully_opened = 0;
+
+
+	/*
+	 * XXX: ISSUE: It appears that, in practice anyway, by the
+	 * time we get here, there are no pending completions.
+	 */
+	while (pending) {
+
+		struct sk_buff *olds[32];
+		unsigned int wanted = 32;
+		unsigned int i, nolds = 0;
+
+		nolds = tile_net_lepp_grab_comps(dev, olds,
+						 wanted, &pending);
+
+		/* ISSUE: We have never actually seen this debug spew. */
+		if (nolds != 0)
+			pr_info("During tile_net_stop(), grabbed %d comps.\n",
+			       nolds);
+
+		for (i = 0; i < nolds; i++)
+			kfree_skb(olds[i]);
+	}
+
+
+	/* Wipe the EPP queue. */
+	memset(priv->epp_queue, 0, sizeof(lepp_queue_t));
+
+	/* Evict the EPP queue. */
+	finv_buffer(priv->epp_queue, PAGE_SIZE);
+
+	return 0;
+}
+
+
+/*
+ * Prepare the "frags" info for the resulting LEPP command.
+ *
+ * If needed, flush the memory used by the frags.
+ */
+static unsigned int tile_net_tx_frags(lepp_frag_t *frags,
+				      struct sk_buff *skb,
+				      void *b_data, unsigned int b_len)
+{
+	unsigned int i, n = 0;
+
+	struct skb_shared_info *sh = skb_shinfo(skb);
+
+	phys_addr_t cpa;
+
+	if (b_len != 0) {
+
+		if (!hash_default)
+			finv_buffer_remote(b_data, b_len);
+
+		cpa = __pa(b_data);
+		frags[n].cpa_lo = cpa;
+		frags[n].cpa_hi = cpa >> 32;
+		frags[n].length = b_len;
+		frags[n].hash_for_home = hash_default;
+		n++;
+	}
+
+	for (i = 0; i < sh->nr_frags; i++) {
+
+		skb_frag_t *f = &sh->frags[i];
+		unsigned long pfn = page_to_pfn(f->page);
+
+		/* FIXME: Compute "hash_for_home" properly. */
+		/* ISSUE: The hypervisor checks CHIP_HAS_REV1_DMA_PACKETS(). */
+		int hash_for_home = hash_default;
+
+		/* FIXME: Hmmm. */
+		if (!hash_default) {
+			void *va = pfn_to_kaddr(pfn) + f->page_offset;
+			BUG_ON(PageHighMem(f->page));
+			finv_buffer_remote(va, f->size);
+		}
+
+		cpa = ((phys_addr_t)pfn << PAGE_SHIFT) + f->page_offset;
+		frags[n].cpa_lo = cpa;
+		frags[n].cpa_hi = cpa >> 32;
+		frags[n].length = f->size;
+		frags[n].hash_for_home = hash_for_home;
+		n++;
+	}
+
+	return n;
+}
+
+
+/*
+ * This function takes "skb", consisting of a header template and a
+ * payload, and hands it to LEPP, to emit as one or more segments,
+ * each consisting of a possibly modified header, plus a piece of the
+ * payload, via a process known as "tcp segmentation offload".
+ *
+ * Usually, "data" will contain the header template, of size "sh_len",
+ * and "sh->frags" will contain "skb->data_len" bytes of payload, and
+ * there will be "sh->gso_segs" segments.
+ *
+ * Sometimes, if "sendfile()" requires copying, we will be called with
+ * "data" containing the header and payload, with "frags" being empty.
+ *
+ * In theory, "sh->nr_frags" could be 3, but in practice, it seems
+ * that this will never actually happen.
+ *
+ * See "emulate_large_send_offload()" for some reference code, which
+ * does not handle checksumming.
+ *
+ * ISSUE: How do we make sure that high memory DMA does not migrate?
+ */
+static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+	struct tile_net_stats_t *stats = &info->stats;
+
+	struct skb_shared_info *sh = skb_shinfo(skb);
+
+	unsigned char *data = skb->data;
+
+	/* The ip header follows the ethernet header. */
+	struct iphdr *ih = ip_hdr(skb);
+	unsigned int ih_len = ih->ihl * 4;
+
+	/* Note that "nh == ih", by definition. */
+	unsigned char *nh = skb_network_header(skb);
+	unsigned int eh_len = nh - data;
+
+	/* The tcp header follows the ip header. */
+	struct tcphdr *th = (struct tcphdr *)(nh + ih_len);
+	unsigned int th_len = th->doff * 4;
+
+	/* The total number of header bytes. */
+	/* NOTE: This may be less than skb_headlen(skb). */
+	unsigned int sh_len = eh_len + ih_len + th_len;
+
+	/* The number of payload bytes at "skb->data + sh_len". */
+	/* This is non-zero for sendfile() without HIGHDMA. */
+	unsigned int b_len = skb_headlen(skb) - sh_len;
+
+	/* The total number of payload bytes. */
+	unsigned int d_len = b_len + skb->data_len;
+
+	/* The maximum payload size. */
+	unsigned int p_len = sh->gso_size;
+
+	/* The total number of segments. */
+	unsigned int num_segs = sh->gso_segs;
+
+	/* The temporary copy of the command. */
+	u32 cmd_body[(LEPP_MAX_CMD_SIZE + 3) / 4];
+	lepp_tso_cmd_t *cmd = (lepp_tso_cmd_t *)cmd_body;
+
+	/* Analyze the "frags". */
+	unsigned int num_frags =
+		tile_net_tx_frags(cmd->frags, skb, data + sh_len, b_len);
+
+	/* The size of the command, including frags and header. */
+	size_t cmd_size = LEPP_TSO_CMD_SIZE(num_frags, sh_len);
+
+	/* The command header. */
+	lepp_tso_cmd_t cmd_init = {
+		.tso = true,
+		.header_size = sh_len,
+		.ip_offset = eh_len,
+		.tcp_offset = eh_len + ih_len,
+		.payload_size = p_len,
+		.num_frags = num_frags,
+	};
+
+	unsigned long irqflags;
+
+	lepp_queue_t *eq = priv->epp_queue;
+
+	struct sk_buff *olds[4];
+	unsigned int wanted = 4;
+	unsigned int i, nolds = 0;
+
+	unsigned int cmd_head, cmd_tail, cmd_next;
+	unsigned int comp_tail;
+
+	unsigned int free_slots;
+
+
+	/* Paranoia. */
+	BUG_ON(skb->protocol != htons(ETH_P_IP));
+	BUG_ON(ih->protocol != IPPROTO_TCP);
+	BUG_ON(skb->ip_summed != CHECKSUM_PARTIAL);
+	BUG_ON(num_frags > LEPP_MAX_FRAGS);
+	/*--BUG_ON(num_segs != (d_len + (p_len - 1)) / p_len); */
+	BUG_ON(num_segs <= 1);
+
+
+	/* Finish preparing the command. */
+
+	/* Copy the command header. */
+	*cmd = cmd_init;
+
+	/* Copy the "header". */
+	memcpy(&cmd->frags[num_frags], data, sh_len);
+
+
+	/* Prefetch and wait, to minimize time spent holding the spinlock. */
+	prefetch_L1(&eq->comp_tail);
+	prefetch_L1(&eq->cmd_tail);
+	mb();
+
+
+	/* Enqueue the command. */
+
+	spin_lock_irqsave(&priv->cmd_lock, irqflags);
+
+	/*
+	 * Handle completions if needed to make room.
+	 * HACK: Spin until there is sufficient room.
+	 */
+	free_slots = lepp_num_free_comp_slots(eq);
+	if (free_slots < 1) {
+spin:
+		nolds += tile_net_lepp_grab_comps(dev, olds + nolds,
+						  wanted - nolds, NULL);
+		if (lepp_num_free_comp_slots(eq) < 1)
+			goto spin;
+	}
+
+	cmd_head = eq->cmd_head;
+	cmd_tail = eq->cmd_tail;
+
+	/* NOTE: The "gotos" below are untested. */
+
+	/* Prepare to advance, detecting full queue. */
+	cmd_next = cmd_tail + cmd_size;
+	if (cmd_tail < cmd_head && cmd_next >= cmd_head)
+		goto spin;
+	if (cmd_next > LEPP_CMD_LIMIT) {
+		cmd_next = 0;
+		if (cmd_next == cmd_head)
+			goto spin;
+	}
+
+	/* Copy the command. */
+	memcpy(&eq->cmds[cmd_tail], cmd, cmd_size);
+
+	/* Advance. */
+	cmd_tail = cmd_next;
+
+	/* Record "skb" for eventual freeing. */
+	comp_tail = eq->comp_tail;
+	eq->comps[comp_tail] = skb;
+	LEPP_QINC(comp_tail);
+	eq->comp_tail = comp_tail;
+
+	/* Flush before allowing LEPP to handle the command. */
+	__insn_mf();
+
+	eq->cmd_tail = cmd_tail;
+
+	spin_unlock_irqrestore(&priv->cmd_lock, irqflags);
+
+	if (nolds == 0)
+		nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL);
+
+	/* Handle completions. */
+	for (i = 0; i < nolds; i++)
+		kfree_skb(olds[i]);
+
+	/* Update stats. */
+	stats->tx_packets += num_segs;
+	stats->tx_bytes += (num_segs * sh_len) + d_len;
+
+	/* Make sure the egress timer is scheduled. */
+	tile_net_schedule_egress_timer(info);
+
+	return NETDEV_TX_OK;
+}
+
+
+/*
+ * Transmit a packet (called by the kernel via "hard_start_xmit" hook).
+ */
+static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+	struct tile_net_stats_t *stats = &info->stats;
+
+	unsigned long irqflags;
+
+	struct skb_shared_info *sh = skb_shinfo(skb);
+
+	unsigned int len = skb->len;
+	unsigned char *data = skb->data;
+
+	unsigned int csum_start = skb->csum_start - skb_headroom(skb);
+
+	lepp_frag_t frags[LEPP_MAX_FRAGS];
+
+	unsigned int num_frags;
+
+	lepp_queue_t *eq = priv->epp_queue;
+
+	struct sk_buff *olds[4];
+	unsigned int wanted = 4;
+	unsigned int i, nolds = 0;
+
+	unsigned int cmd_size = sizeof(lepp_cmd_t);
+
+	unsigned int cmd_head, cmd_tail, cmd_next;
+	unsigned int comp_tail;
+
+	lepp_cmd_t cmds[LEPP_MAX_FRAGS];
+
+	unsigned int free_slots;
+
+
+	/*
+	 * This is paranoia, since we think that if the link doesn't come
+	 * up, telling Linux we have no carrier will keep it from trying
+	 * to transmit.  If it does, though, we can't execute this routine,
+	 * since data structures we depend on aren't set up yet.
+	 */
+	if (!info->registered)
+		return NETDEV_TX_BUSY;
+
+
+	/* Save the timestamp. */
+	dev->trans_start = jiffies;
+
+
+#ifdef TILE_NET_PARANOIA
+#if CHIP_HAS_CBOX_HOME_MAP()
+	if (hash_default) {
+		HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)data);
+		if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3)
+			panic("Non-coherent egress buffer!");
+	}
+#endif
+#endif
+
+
+#ifdef TILE_NET_DUMP_PACKETS
+	/* ISSUE: Does not dump the "frags". */
+	dump_packet(data, skb_headlen(skb), "tx");
+#endif /* TILE_NET_DUMP_PACKETS */
+
+
+	if (sh->gso_size != 0)
+		return tile_net_tx_tso(skb, dev);
+
+
+	/* Prepare the commands. */
+
+	num_frags = tile_net_tx_frags(frags, skb, data, skb_headlen(skb));
+
+	for (i = 0; i < num_frags; i++) {
+
+		bool final = (i == num_frags - 1);
+
+		lepp_cmd_t cmd = {
+			.cpa_lo = frags[i].cpa_lo,
+			.cpa_hi = frags[i].cpa_hi,
+			.length = frags[i].length,
+			.hash_for_home = frags[i].hash_for_home,
+			.send_completion = final,
+			.end_of_packet = final
+		};
+
+		if (i == 0 && skb->ip_summed == CHECKSUM_PARTIAL) {
+			cmd.compute_checksum = 1;
+			cmd.checksum_data.bits.start_byte = csum_start;
+			cmd.checksum_data.bits.count = len - csum_start;
+			cmd.checksum_data.bits.destination_byte =
+				csum_start + skb->csum_offset;
+		}
+
+		cmds[i] = cmd;
+	}
+
+
+	/* Prefetch and wait, to minimize time spent holding the spinlock. */
+	prefetch_L1(&eq->comp_tail);
+	prefetch_L1(&eq->cmd_tail);
+	mb();
+
+
+	/* Enqueue the commands. */
+
+	spin_lock_irqsave(&priv->cmd_lock, irqflags);
+
+	/*
+	 * Handle completions if needed to make room.
+	 * HACK: Spin until there is sufficient room.
+	 */
+	free_slots = lepp_num_free_comp_slots(eq);
+	if (free_slots < 1) {
+spin:
+		nolds += tile_net_lepp_grab_comps(dev, olds + nolds,
+						  wanted - nolds, NULL);
+		if (lepp_num_free_comp_slots(eq) < 1)
+			goto spin;
+	}
+
+	cmd_head = eq->cmd_head;
+	cmd_tail = eq->cmd_tail;
+
+	/* NOTE: The "gotos" below are untested. */
+
+	/* Copy the commands, or fail. */
+	for (i = 0; i < num_frags; i++) {
+
+		/* Prepare to advance, detecting full queue. */
+		cmd_next = cmd_tail + cmd_size;
+		if (cmd_tail < cmd_head && cmd_next >= cmd_head)
+			goto spin;
+		if (cmd_next > LEPP_CMD_LIMIT) {
+			cmd_next = 0;
+			if (cmd_next == cmd_head)
+				goto spin;
+		}
+
+		/* Copy the command. */
+		*(lepp_cmd_t *)&eq->cmds[cmd_tail] = cmds[i];
+
+		/* Advance. */
+		cmd_tail = cmd_next;
+	}
+
+	/* Record "skb" for eventual freeing. */
+	comp_tail = eq->comp_tail;
+	eq->comps[comp_tail] = skb;
+	LEPP_QINC(comp_tail);
+	eq->comp_tail = comp_tail;
+
+	/* Flush before allowing LEPP to handle the command. */
+	__insn_mf();
+
+	eq->cmd_tail = cmd_tail;
+
+	spin_unlock_irqrestore(&priv->cmd_lock, irqflags);
+
+	if (nolds == 0)
+		nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL);
+
+	/* Handle completions. */
+	for (i = 0; i < nolds; i++)
+		kfree_skb(olds[i]);
+
+	/* HACK: Track "expanded" size for short packets (e.g. 42 < 60). */
+	stats->tx_packets++;
+	stats->tx_bytes += ((len >= ETH_ZLEN) ? len : ETH_ZLEN);
+
+	/* Make sure the egress timer is scheduled. */
+	tile_net_schedule_egress_timer(info);
+
+	return NETDEV_TX_OK;
+}
+
+
+/*
+ * Deal with a transmit timeout.
+ */
+static void tile_net_tx_timeout(struct net_device *dev)
+{
+	PDEBUG("tile_net_tx_timeout()\n");
+	PDEBUG("Transmit timeout at %ld, latency %ld\n", jiffies,
+	       jiffies - dev->trans_start);
+
+	/* XXX: ISSUE: This doesn't seem useful for us. */
+	netif_wake_queue(dev);
+}
+
+
+/*
+ * Ioctl commands.
+ */
+static int tile_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	return -EOPNOTSUPP;
+}
+
+
+/*
+ * Get System Network Statistics.
+ *
+ * Returns the address of the device statistics structure.
+ */
+static struct net_device_stats *tile_net_get_stats(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	u32 rx_packets = 0;
+	u32 tx_packets = 0;
+	u32 rx_bytes = 0;
+	u32 tx_bytes = 0;
+	int i;
+
+	for_each_online_cpu(i) {
+		if (priv->cpu[i]) {
+			rx_packets += priv->cpu[i]->stats.rx_packets;
+			rx_bytes += priv->cpu[i]->stats.rx_bytes;
+			tx_packets += priv->cpu[i]->stats.tx_packets;
+			tx_bytes += priv->cpu[i]->stats.tx_bytes;
+		}
+	}
+
+	priv->stats.rx_packets = rx_packets;
+	priv->stats.rx_bytes = rx_bytes;
+	priv->stats.tx_packets = tx_packets;
+	priv->stats.tx_bytes = tx_bytes;
+
+	return &priv->stats;
+}
+
+
+/*
+ * Change the "mtu".
+ *
+ * The "change_mtu" method is usually not needed.
+ * If you need it, it must be like this.
+ */
+static int tile_net_change_mtu(struct net_device *dev, int new_mtu)
+{
+	PDEBUG("tile_net_change_mtu()\n");
+
+	/* Check ranges. */
+	if ((new_mtu < 68) || (new_mtu > 1500))
+		return -EINVAL;
+
+	/* Accept the value. */
+	dev->mtu = new_mtu;
+
+	return 0;
+}
+
+
+/*
+ * Change the Ethernet Address of the NIC.
+ *
+ * The hypervisor driver does not support changing MAC address.  However,
+ * the IPP does not do anything with the MAC address, so the address which
+ * gets used on outgoing packets, and which is accepted on incoming packets,
+ * is completely up to the NetIO program or kernel driver which is actually
+ * handling them.
+ *
+ * Returns 0 on success, negative on failure.
+ */
+static int tile_net_set_mac_address(struct net_device *dev, void *p)
+{
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
+	/* ISSUE: Note that "dev_addr" is now a pointer. */
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+	return 0;
+}
+
+
+/*
+ * Obtain the MAC address from the hypervisor.
+ * This must be done before opening the device.
+ */
+static int tile_net_get_mac(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	char hv_dev_name[32];
+	int len;
+
+	__netio_getset_offset_t offset = { .word = NETIO_IPP_PARAM_OFF };
+
+	int ret;
+
+	/* For example, "xgbe0". */
+	strcpy(hv_dev_name, dev->name);
+	len = strlen(hv_dev_name);
+
+	/* For example, "xgbe/0". */
+	hv_dev_name[len] = hv_dev_name[len - 1];
+	hv_dev_name[len - 1] = '/';
+	len++;
+
+	/* For example, "xgbe/0/native_hash". */
+	strcpy(hv_dev_name + len, hash_default ? "/native_hash" : "/native");
+
+	/* Get the hypervisor handle for this device. */
+	priv->hv_devhdl = hv_dev_open((HV_VirtAddr)hv_dev_name, 0);
+	PDEBUG("hv_dev_open(%s) returned %d %p\n",
+	       hv_dev_name, priv->hv_devhdl, &priv->hv_devhdl);
+	if (priv->hv_devhdl < 0) {
+		if (priv->hv_devhdl == HV_ENODEV)
+			printk(KERN_DEBUG "Ignoring unconfigured device %s\n",
+				 hv_dev_name);
+		else
+			printk(KERN_DEBUG "hv_dev_open(%s) returned %d\n",
+				 hv_dev_name, priv->hv_devhdl);
+		return -1;
+	}
+
+	/*
+	 * Read the hardware address from the hypervisor.
+	 * ISSUE: Note that "dev_addr" is now a pointer.
+	 */
+	offset.bits.class = NETIO_PARAM;
+	offset.bits.addr = NETIO_PARAM_MAC;
+	ret = hv_dev_pread(priv->hv_devhdl, 0,
+			   (HV_VirtAddr)dev->dev_addr, dev->addr_len,
+			   offset.word);
+	PDEBUG("hv_dev_pread(NETIO_PARAM_MAC) returned %d\n", ret);
+	if (ret <= 0) {
+		printk(KERN_DEBUG "hv_dev_pread(NETIO_PARAM_MAC) %s failed\n",
+		       dev->name);
+		/*
+		 * Since the device is configured by the hypervisor but we
+		 * can't get its MAC address, we are most likely running
+		 * the simulator, so let's generate a random MAC address.
+		 */
+		random_ether_addr(dev->dev_addr);
+	}
+
+	return 0;
+}
+
+
+static struct net_device_ops tile_net_ops = {
+	.ndo_open = tile_net_open,
+	.ndo_stop = tile_net_stop,
+	.ndo_start_xmit = tile_net_tx,
+	.ndo_do_ioctl = tile_net_ioctl,
+	.ndo_get_stats = tile_net_get_stats,
+	.ndo_change_mtu = tile_net_change_mtu,
+	.ndo_tx_timeout = tile_net_tx_timeout,
+	.ndo_set_mac_address = tile_net_set_mac_address
+};
+
+
+/*
+ * The setup function.
+ *
+ * This uses ether_setup() to assign various fields in dev, including
+ * setting IFF_BROADCAST and IFF_MULTICAST, then sets some extra fields.
+ */
+static void tile_net_setup(struct net_device *dev)
+{
+	PDEBUG("tile_net_setup()\n");
+
+	ether_setup(dev);
+
+	dev->netdev_ops = &tile_net_ops;
+
+	dev->watchdog_timeo = TILE_NET_TIMEOUT;
+
+	/* We want lockless xmit. */
+	dev->features |= NETIF_F_LLTX;
+
+	/* We support hardware tx checksums. */
+	dev->features |= NETIF_F_HW_CSUM;
+
+	/* We support scatter/gather. */
+	dev->features |= NETIF_F_SG;
+
+	/* We support TSO. */
+	dev->features |= NETIF_F_TSO;
+
+#ifdef TILE_NET_GSO
+	/* We support GSO. */
+	dev->features |= NETIF_F_GSO;
+#endif
+
+	if (hash_default)
+		dev->features |= NETIF_F_HIGHDMA;
+
+	/* ISSUE: We should support NETIF_F_UFO. */
+
+	dev->tx_queue_len = TILE_NET_TX_QUEUE_LEN;
+
+	dev->mtu = TILE_NET_MTU;
+}
+
+
+/*
+ * Allocate the device structure, register the device, and obtain the
+ * MAC address from the hypervisor.
+ */
+static struct net_device *tile_net_dev_init(const char *name)
+{
+	int ret;
+	struct net_device *dev;
+	struct tile_net_priv *priv;
+	struct page *page;
+
+	/*
+	 * Allocate the device structure.  This allocates "priv", calls
+	 * tile_net_setup(), and saves "name".  Normally, "name" is a
+	 * template, instantiated by register_netdev(), but not for us.
+	 */
+	dev = alloc_netdev(sizeof(*priv), name, tile_net_setup);
+	if (!dev) {
+		pr_err("alloc_netdev(%s) failed\n", name);
+		return NULL;
+	}
+
+	priv = netdev_priv(dev);
+
+	/* Initialize "priv". */
+
+	memset(priv, 0, sizeof(*priv));
+
+	/* Save "dev" for "tile_net_open_retry()". */
+	priv->dev = dev;
+
+	INIT_DELAYED_WORK(&priv->retry_work, tile_net_open_retry);
+
+	spin_lock_init(&priv->cmd_lock);
+	spin_lock_init(&priv->comp_lock);
+
+	/* Allocate "epp_queue". */
+	BUG_ON(get_order(sizeof(lepp_queue_t)) != 0);
+	page = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0);
+	if (!page) {
+		free_netdev(dev);
+		return NULL;
+	}
+	priv->epp_queue = page_address(page);
+
+	/* Register the network device. */
+	ret = register_netdev(dev);
+	if (ret) {
+		pr_err("register_netdev %s failed %d\n", dev->name, ret);
+		free_page((unsigned long)priv->epp_queue);
+		free_netdev(dev);
+		return NULL;
+	}
+
+	/* Get the MAC address. */
+	ret = tile_net_get_mac(dev);
+	if (ret < 0) {
+		unregister_netdev(dev);
+		free_page((unsigned long)priv->epp_queue);
+		free_netdev(dev);
+		return NULL;
+	}
+
+	return dev;
+}
+
+
+/*
+ * Module cleanup.
+ */
+static void tile_net_cleanup(void)
+{
+	int i;
+
+	for (i = 0; i < TILE_NET_DEVS; i++) {
+		if (tile_net_devs[i]) {
+			struct net_device *dev = tile_net_devs[i];
+			struct tile_net_priv *priv = netdev_priv(dev);
+			unregister_netdev(dev);
+			finv_buffer(priv->epp_queue, PAGE_SIZE);
+			free_page((unsigned long)priv->epp_queue);
+			free_netdev(dev);
+		}
+	}
+}
+
+
+/*
+ * Module initialization.
+ */
+static int tile_net_init_module(void)
+{
+	pr_info("Tilera IPP Net Driver\n");
+
+	tile_net_devs[0] = tile_net_dev_init("xgbe0");
+	tile_net_devs[1] = tile_net_dev_init("xgbe1");
+	tile_net_devs[2] = tile_net_dev_init("gbe0");
+	tile_net_devs[3] = tile_net_dev_init("gbe1");
+
+	return 0;
+}
+
+
+#ifndef MODULE
+/*
+ * The "network_cpus" boot argument specifies the cpus that are dedicated
+ * to handle ingress packets.
+ *
+ * The parameter should be in the form "network_cpus=m-n[,x-y]", where
+ * m, n, x, y are integer numbers that represent the cpus that can be
+ * neither a dedicated cpu nor a dataplane cpu.
+ */
+static int __init network_cpus_setup(char *str)
+{
+	int rc = cpulist_parse_crop(str, &network_cpus_map);
+	if (rc != 0) {
+		pr_warning("network_cpus=%s: malformed cpu list\n",
+		       str);
+	} else {
+
+		/* Remove dedicated cpus. */
+		cpumask_and(&network_cpus_map, &network_cpus_map,
+			    cpu_possible_mask);
+
+
+		if (cpumask_empty(&network_cpus_map)) {
+			pr_warning("Ignoring network_cpus='%s'.\n",
+			       str);
+		} else {
+			char buf[1024];
+			cpulist_scnprintf(buf, sizeof(buf), &network_cpus_map);
+			pr_info("Linux network CPUs: %s\n", buf);
+			network_cpus_used = true;
+		}
+	}
+
+	return 0;
+}
+__setup("network_cpus=", network_cpus_setup);
+#endif
+
+
+module_init(tile_net_init_module);
+module_exit(tile_net_cleanup);
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index f01e344..98e6fdf 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -49,6 +49,7 @@
 obj-$(CONFIG_X86_VISWS) += setup-irq.o
 obj-$(CONFIG_MN10300) += setup-bus.o
 obj-$(CONFIG_MICROBLAZE) += setup-bus.o
+obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
 
 #
 # ACPI Related PCI FW Functions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index f5c63fe..6f9350c 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2136,6 +2136,24 @@
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
 			quirk_unhide_mch_dev6);
 
+#ifdef CONFIG_TILE
+/*
+ * The Tilera TILEmpower platform needs to set the link speed
+ * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed
+ * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe
+ * capability register of the PEX8624 PCIe switch. The switch
+ * supports link speed auto negotiation, but falsely sets
+ * the link speed to 5GT/s.
+ */
+static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev)
+{
+	if (tile_plx_gen1) {
+		pci_write_config_dword(dev, 0x98, 0x1);
+		mdelay(50);
+	}
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1);
+#endif /* CONFIG_TILE */
 
 #ifdef CONFIG_PCI_MSI
 /* Some chipsets do not support MSI. We cannot easily rely on setting
diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c
index 752dbee..5d9c666 100644
--- a/drivers/s390/cio/qdio_thinint.c
+++ b/drivers/s390/cio/qdio_thinint.c
@@ -292,8 +292,8 @@
 		return;
 
 	/* reset adapter interrupt indicators */
-	put_indicator(irq_ptr->dsci);
 	set_subchannel_ind(irq_ptr, 1);
+	put_indicator(irq_ptr->dsci);
 }
 
 void __exit tiqdio_unregister_thinints(void)
diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h
index 377cfb7..f30f8d6 100644
--- a/drivers/scsi/arm/fas216.h
+++ b/drivers/scsi/arm/fas216.h
@@ -345,7 +345,7 @@
  *	   : SCpnt - Command to queue
  * Returns : 0 - success, else error
  */
-extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *)
+extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *);
 
 /* Function: irqreturn_t fas216_intr (FAS216_Info *info)
  * Purpose : handle interrupts from the interface to progress a command
diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index cb12a8e..3f5e387 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -418,8 +418,11 @@
 		list_add(&clk->sibling, &root_clks);
 
 	list_add(&clk->node, &clock_list);
+
+#ifdef CONFIG_SH_CLK_CPG_LEGACY
 	if (clk->ops && clk->ops->init)
 		clk->ops->init(clk);
+#endif
 
 out_unlock:
 	mutex_unlock(&clock_list_sem);
@@ -455,19 +458,13 @@
 
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
-	return clk_set_rate_ex(clk, rate, 0);
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id)
-{
 	int ret = -EOPNOTSUPP;
 	unsigned long flags;
 
 	spin_lock_irqsave(&clock_lock, flags);
 
 	if (likely(clk->ops && clk->ops->set_rate)) {
-		ret = clk->ops->set_rate(clk, rate, algo_id);
+		ret = clk->ops->set_rate(clk, rate);
 		if (ret != 0)
 			goto out_unlock;
 	} else {
@@ -485,7 +482,7 @@
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(clk_set_rate_ex);
+EXPORT_SYMBOL_GPL(clk_set_rate);
 
 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
@@ -653,8 +650,7 @@
 					clkp->ops->set_parent(clkp,
 						clkp->parent);
 				if (likely(clkp->ops->set_rate))
-					clkp->ops->set_rate(clkp,
-						rate, NO_CHANGE);
+					clkp->ops->set_rate(clkp, rate);
 				else if (likely(clkp->ops->recalc))
 					clkp->rate = clkp->ops->recalc(clkp);
 			}
diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index 3aea5f0..6172335 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -110,8 +110,7 @@
 	return 0;
 }
 
-static int sh_clk_div6_set_rate(struct clk *clk,
-				unsigned long rate, int algo_id)
+static int sh_clk_div6_set_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long value;
 	int idx;
@@ -132,7 +131,7 @@
 	unsigned long value;
 	int ret;
 
-	ret = sh_clk_div6_set_rate(clk, clk->rate, 0);
+	ret = sh_clk_div6_set_rate(clk, clk->rate);
 	if (ret == 0) {
 		value = __raw_readl(clk->enable_reg);
 		value &= ~0x100; /* clear stop bit to enable clock */
@@ -253,7 +252,7 @@
 	return 0;
 }
 
-static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate, int algo_id)
+static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate)
 {
 	struct clk_div4_table *d4t = clk->priv;
 	unsigned long value;
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index ea071a5..44447f5 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2301,7 +2301,7 @@
 	return ret;
 }
 
-static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot);
+static DEVICE_ATTR(stat_status, S_IWUSR | S_IRUGO, read_status, reboot);
 
 static ssize_t read_human_status(struct device *dev,
 			struct device_attribute *attr, char *buf)
@@ -2364,8 +2364,7 @@
 	return ret;
 }
 
-static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO,
-				read_human_status, NULL);
+static DEVICE_ATTR(stat_human_status, S_IRUGO, read_human_status, NULL);
 
 static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -2397,7 +2396,7 @@
 	return ret;
 }
 
-static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL);
+static DEVICE_ATTR(stat_delin, S_IRUGO, read_delin, NULL);
 
 #define UEA_ATTR(name, reset)					\
 								\
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index b5e20e8..717ff65 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -2017,7 +2017,7 @@
 			}
 		} else {
 			/* gpio_request fail so use -EINVAL for gpio_is_valid */
-			ubc->vbus_pin = -EINVAL;
+			udc->vbus_pin = -EINVAL;
 		}
 	}
 
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 86afdc7..6e25996 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -1067,7 +1067,7 @@
 						    &debug_registers_fops))
 		goto file_error;
 
-	if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus,
+	if (!debugfs_create_file("lpm", S_IRUGO|S_IWUSR, ehci->debug_dir, bus,
 						    &debug_lpm_fops))
 		goto file_error;
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 502a7e6..e906280 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1063,10 +1063,11 @@
 				tmp && tmp != qh;
 				tmp = tmp->qh_next.qh)
 			continue;
-		/* periodic qh self-unlinks on empty */
-		if (!tmp)
-			goto nogood;
-		unlink_async (ehci, qh);
+		/* periodic qh self-unlinks on empty, and a COMPLETING qh
+		 * may already be unlinked.
+		 */
+		if (tmp)
+			unlink_async(ehci, qh);
 		/* FALL THROUGH */
 	case QH_STATE_UNLINK:		/* wait for hw to finish? */
 	case QH_STATE_UNLINK_WAIT:
@@ -1083,7 +1084,6 @@
 		}
 		/* else FALL THROUGH */
 	default:
-nogood:
 		/* caller was supposed to have unlinked any requests;
 		 * that's not our job.  just leak this memory.
 		 */
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index d36e4e7..12f70c3 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -141,6 +141,10 @@
 		qh_put (ehci->async);
 	ehci->async = NULL;
 
+	if (ehci->dummy)
+		qh_put(ehci->dummy);
+	ehci->dummy = NULL;
+
 	/* DMA consistent memory and pools */
 	if (ehci->qtd_pool)
 		dma_pool_destroy (ehci->qtd_pool);
@@ -227,8 +231,26 @@
 	if (ehci->periodic == NULL) {
 		goto fail;
 	}
-	for (i = 0; i < ehci->periodic_size; i++)
-		ehci->periodic [i] = EHCI_LIST_END(ehci);
+
+	if (ehci->use_dummy_qh) {
+		struct ehci_qh_hw	*hw;
+		ehci->dummy = ehci_qh_alloc(ehci, flags);
+		if (!ehci->dummy)
+			goto fail;
+
+		hw = ehci->dummy->hw;
+		hw->hw_next = EHCI_LIST_END(ehci);
+		hw->hw_qtd_next = EHCI_LIST_END(ehci);
+		hw->hw_alt_next = EHCI_LIST_END(ehci);
+		hw->hw_token &= ~QTD_STS_ACTIVE;
+		ehci->dummy->hw = hw;
+
+		for (i = 0; i < ehci->periodic_size; i++)
+			ehci->periodic[i] = ehci->dummy->qh_dma;
+	} else {
+		for (i = 0; i < ehci->periodic_size; i++)
+			ehci->periodic[i] = EHCI_LIST_END(ehci);
+	}
 
 	/* software shadow of hardware table */
 	ehci->pshadow = kcalloc(ehci->periodic_size, sizeof(void *), flags);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index a1e8d27..01bb72b 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -103,6 +103,19 @@
 	if (retval)
 		return retval;
 
+	if ((pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x7808) ||
+	    (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x4396)) {
+		/* EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
+		 * read/write memory space which does not belong to it when
+		 * there is NULL pointer with T-bit set to 1 in the frame list
+		 * table. To avoid the issue, the frame list link pointer
+		 * should always contain a valid pointer to a inactive qh.
+		 */
+		ehci->use_dummy_qh = 1;
+		ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI "
+				"dummy qh workaround\n");
+	}
+
 	/* data structure init */
 	retval = ehci_init(hcd);
 	if (retval)
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index a92526d..d9f78eb 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -98,7 +98,14 @@
 	 */
 	*prev_p = *periodic_next_shadow(ehci, &here,
 			Q_NEXT_TYPE(ehci, *hw_p));
-	*hw_p = *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p));
+
+	if (!ehci->use_dummy_qh ||
+	    *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p))
+			!= EHCI_LIST_END(ehci))
+		*hw_p = *shadow_next_periodic(ehci, &here,
+				Q_NEXT_TYPE(ehci, *hw_p));
+	else
+		*hw_p = ehci->dummy->qh_dma;
 }
 
 /* how many of the uframe's 125 usecs are allocated? */
@@ -2335,7 +2342,11 @@
 				 * pointer for much longer, if at all.
 				 */
 				*q_p = q.itd->itd_next;
-				*hw_p = q.itd->hw_next;
+				if (!ehci->use_dummy_qh ||
+				    q.itd->hw_next != EHCI_LIST_END(ehci))
+					*hw_p = q.itd->hw_next;
+				else
+					*hw_p = ehci->dummy->qh_dma;
 				type = Q_NEXT_TYPE(ehci, q.itd->hw_next);
 				wmb();
 				modified = itd_complete (ehci, q.itd);
@@ -2368,7 +2379,11 @@
 				 * URB completion.
 				 */
 				*q_p = q.sitd->sitd_next;
-				*hw_p = q.sitd->hw_next;
+				if (!ehci->use_dummy_qh ||
+				    q.sitd->hw_next != EHCI_LIST_END(ehci))
+					*hw_p = q.sitd->hw_next;
+				else
+					*hw_p = ehci->dummy->qh_dma;
 				type = Q_NEXT_TYPE(ehci, q.sitd->hw_next);
 				wmb();
 				modified = sitd_complete (ehci, q.sitd);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bde823f..ba8eab3 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -73,6 +73,7 @@
 
 	/* async schedule support */
 	struct ehci_qh		*async;
+	struct ehci_qh		*dummy;		/* For AMD quirk use */
 	struct ehci_qh		*reclaim;
 	unsigned		scanning : 1;
 
@@ -131,6 +132,7 @@
 	unsigned		need_io_watchdog:1;
 	unsigned		broken_periodic:1;
 	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
+	unsigned		use_dummy_qh:1;	/* AMD Frame List table quirk*/
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 6c4fb4e..43a39eb 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2683,7 +2683,7 @@
 	return 0;
 }
 
-static int __init isp1362_probe(struct platform_device *pdev)
+static int __devinit isp1362_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
 	struct isp1362_hcd *isp1362_hcd;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 2027706..d178761 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1045,7 +1045,7 @@
 	if (udev->speed == USB_SPEED_SUPER)
 		return ep->ss_ep_comp.wBytesPerInterval;
 
-	max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+	max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
 	max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
 	/* A 0 in max burst means 1 transfer per ESIT */
 	return max_packet * (max_burst + 1);
@@ -1135,7 +1135,7 @@
 		/* Fall through */
 	case USB_SPEED_FULL:
 	case USB_SPEED_LOW:
-		max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+		max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
 		ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
 		break;
 	default:
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9f3115e..df558f6 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2104,7 +2104,6 @@
 
 	if (!(status & STS_EINT)) {
 		spin_unlock(&xhci->lock);
-		xhci_warn(xhci, "Spurious interrupt.\n");
 		return IRQ_NONE;
 	}
 	xhci_dbg(xhci, "op reg status = %08x\n", status);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5d7d4e9..06fca08 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -577,6 +577,65 @@
 	xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
 }
 
+static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
+{
+	u64	val_64;
+
+	/* step 2: initialize command ring buffer */
+	val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+		(xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+				      xhci->cmd_ring->dequeue) &
+		 (u64) ~CMD_RING_RSVD_BITS) |
+		xhci->cmd_ring->cycle_state;
+	xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
+			(long unsigned long) val_64);
+	xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+}
+
+/*
+ * The whole command ring must be cleared to zero when we suspend the host.
+ *
+ * The host doesn't save the command ring pointer in the suspend well, so we
+ * need to re-program it on resume.  Unfortunately, the pointer must be 64-byte
+ * aligned, because of the reserved bits in the command ring dequeue pointer
+ * register.  Therefore, we can't just set the dequeue pointer back in the
+ * middle of the ring (TRBs are 16-byte aligned).
+ */
+static void xhci_clear_command_ring(struct xhci_hcd *xhci)
+{
+	struct xhci_ring *ring;
+	struct xhci_segment *seg;
+
+	ring = xhci->cmd_ring;
+	seg = ring->deq_seg;
+	do {
+		memset(seg->trbs, 0, SEGMENT_SIZE);
+		seg = seg->next;
+	} while (seg != ring->deq_seg);
+
+	/* Reset the software enqueue and dequeue pointers */
+	ring->deq_seg = ring->first_seg;
+	ring->dequeue = ring->first_seg->trbs;
+	ring->enq_seg = ring->deq_seg;
+	ring->enqueue = ring->dequeue;
+
+	/*
+	 * Ring is now zeroed, so the HW should look for change of ownership
+	 * when the cycle bit is set to 1.
+	 */
+	ring->cycle_state = 1;
+
+	/*
+	 * Reset the hardware dequeue pointer.
+	 * Yes, this will need to be re-written after resume, but we're paranoid
+	 * and want to make sure the hardware doesn't access bogus memory
+	 * because, say, the BIOS or an SMI started the host without changing
+	 * the command ring pointers.
+	 */
+	xhci_set_cmd_ring_deq(xhci);
+}
+
 /*
  * Stop HC (not bus-specific)
  *
@@ -604,6 +663,7 @@
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
 	}
+	xhci_clear_command_ring(xhci);
 
 	/* step 3: save registers */
 	xhci_save_registers(xhci);
@@ -635,7 +695,6 @@
 	u32			command, temp = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
-	u64	val_64;
 	int	old_state, retval;
 
 	old_state = hcd->state;
@@ -648,15 +707,7 @@
 		/* step 1: restore register */
 		xhci_restore_registers(xhci);
 		/* step 2: initialize command ring buffer */
-		val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
-		val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
-			 (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
-					       xhci->cmd_ring->dequeue) &
-			 (u64) ~CMD_RING_RSVD_BITS) |
-			 xhci->cmd_ring->cycle_state;
-		xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
-				(long unsigned long) val_64);
-		xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+		xhci_set_cmd_ring_deq(xhci);
 		/* step 3: restore state and start state*/
 		/* step 3: set CRS flag */
 		command = xhci_readl(xhci, &xhci->op_regs->command);
@@ -714,6 +765,7 @@
 		return retval;
 	}
 
+	spin_unlock_irq(&xhci->lock);
 	/* Re-setup MSI-X */
 	if (hcd->irq)
 		free_irq(hcd->irq, hcd);
@@ -736,6 +788,7 @@
 		hcd->irq = pdev->irq;
 	}
 
+	spin_lock_irq(&xhci->lock);
 	/* step 4: set Run/Stop bit */
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_RUN;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 93d3bf4..85e6564 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -621,6 +621,11 @@
 #define MAX_PACKET_MASK		(0xffff << 16)
 #define MAX_PACKET_DECODED(p)	(((p) >> 16) & 0xffff)
 
+/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
+ * USB2.0 spec 9.6.6.
+ */
+#define GET_MAX_PACKET(p)	((p) & 0x7ff)
+
 /* tx_info bitmasks */
 #define AVG_TRB_LENGTH_FOR_EP(p)	((p) & 0xffff)
 #define MAX_ESIT_PAYLOAD_FOR_EP(p)	(((p) & 0xffff) << 16)
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index 2f43c57..9251773 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -196,11 +196,9 @@
 	return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
 }
 
-static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
-		   get_port0_handler, set_port0_handler);
+static DEVICE_ATTR(port0, S_IRUGO | S_IWUSR, get_port0_handler, set_port0_handler);
 
-static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
-		   get_port1_handler, set_port1_handler);
+static DEVICE_ATTR(port1, S_IRUGO | S_IWUSR, get_port1_handler, set_port1_handler);
 
 
 static int cypress_probe(struct usb_interface *interface,
diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c
index d77aba4..f63776a 100644
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -86,7 +86,7 @@
 	return count;
 }
 
-static DEVICE_ATTR(speed, S_IWUGO | S_IRUGO, show_speed, set_speed);
+static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR, show_speed, set_speed);
 
 static int tv_probe(struct usb_interface *interface,
 		    const struct usb_device_id *id)
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 63da2c3..c96f51d 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -94,7 +94,7 @@
 	change_color(led);						\
 	return count;							\
 }									\
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value);
+static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, show_##value, set_##value);
 show_set(blue);
 show_set(red);
 show_set(green);
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index de8ef94..417b8f2 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -192,7 +192,7 @@
 								\
 	return count;						\
 }								\
-static DEVICE_ATTR(name, S_IWUGO | S_IRUGO, show_attr_##name, set_attr_##name);
+static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_attr_##name, set_attr_##name);
 
 static ssize_t show_attr_text(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -223,7 +223,7 @@
 	return count;
 }
 
-static DEVICE_ATTR(text, S_IWUGO | S_IRUGO, show_attr_text, set_attr_text);
+static DEVICE_ATTR(text, S_IRUGO | S_IWUSR, show_attr_text, set_attr_text);
 
 static ssize_t show_attr_decimals(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -272,8 +272,7 @@
 	return count;
 }
 
-static DEVICE_ATTR(decimals, S_IWUGO | S_IRUGO,
-	show_attr_decimals, set_attr_decimals);
+static DEVICE_ATTR(decimals, S_IRUGO | S_IWUSR, show_attr_decimals, set_attr_decimals);
 
 static ssize_t show_attr_textmode(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -319,8 +318,7 @@
 	return -EINVAL;
 }
 
-static DEVICE_ATTR(textmode, S_IWUGO | S_IRUGO,
-	show_attr_textmode, set_attr_textmode);
+static DEVICE_ATTR(textmode, S_IRUGO | S_IWUSR, show_attr_textmode, set_attr_textmode);
 
 
 MYDEV_ATTR_SIMPLE_UNSIGNED(powered, update_display_powered);
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
index bdc3ea6..9fea482 100644
--- a/drivers/usb/otg/langwell_otg.c
+++ b/drivers/usb/otg/langwell_otg.c
@@ -1896,7 +1896,7 @@
 	}
 	return count;
 }
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
+static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req);
 
 static ssize_t
 get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1942,8 +1942,7 @@
 	}
 	return count;
 }
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
-	get_a_bus_drop, set_a_bus_drop);
+static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop);
 
 static ssize_t
 get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1988,7 +1987,7 @@
 	}
 	return count;
 }
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
+static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req);
 
 static ssize_t
 set_a_clr_err(struct device *dev, struct device_attribute *attr,
@@ -2012,7 +2011,7 @@
 	}
 	return count;
 }
-static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
+static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err);
 
 static struct attribute *inputs_attrs[] = {
 	&dev_attr_a_bus_req.attr,
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
index 57fc2f5..ceba512 100644
--- a/drivers/usb/storage/sierra_ms.c
+++ b/drivers/usb/storage/sierra_ms.c
@@ -121,7 +121,7 @@
 	}
 	return result;
 }
-static DEVICE_ATTR(truinst, S_IWUGO | S_IRUGO, show_truinst, NULL);
+static DEVICE_ATTR(truinst, S_IRUGO, show_truinst, NULL);
 
 int sierra_ms_init(struct us_data *us)
 {
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index e207810..0870329 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -197,12 +197,12 @@
 {
 	struct backlight_device *bd = to_backlight_device(dev);
 
-	if (bd->ops->options & BL_CORE_SUSPENDRESUME) {
-		mutex_lock(&bd->ops_lock);
+	mutex_lock(&bd->ops_lock);
+	if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) {
 		bd->props.state |= BL_CORE_SUSPENDED;
 		backlight_update_status(bd);
-		mutex_unlock(&bd->ops_lock);
 	}
+	mutex_unlock(&bd->ops_lock);
 
 	return 0;
 }
@@ -211,12 +211,12 @@
 {
 	struct backlight_device *bd = to_backlight_device(dev);
 
-	if (bd->ops->options & BL_CORE_SUSPENDRESUME) {
-		mutex_lock(&bd->ops_lock);
+	mutex_lock(&bd->ops_lock);
+	if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) {
 		bd->props.state &= ~BL_CORE_SUSPENDED;
 		backlight_update_status(bd);
-		mutex_unlock(&bd->ops_lock);
 	}
+	mutex_unlock(&bd->ops_lock);
 
 	return 0;
 }
diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c
index f53b9f1..affdf3e 100644
--- a/drivers/video/fbcmap.c
+++ b/drivers/video/fbcmap.c
@@ -88,34 +88,48 @@
  *
  */
 
-int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp)
+int fb_alloc_cmap_gfp(struct fb_cmap *cmap, int len, int transp, gfp_t flags)
 {
-    int size = len*sizeof(u16);
+	int size = len * sizeof(u16);
+	int ret = -ENOMEM;
 
-    if (cmap->len != len) {
-	fb_dealloc_cmap(cmap);
-	if (!len)
-	    return 0;
-	if (!(cmap->red = kmalloc(size, GFP_ATOMIC)))
-	    goto fail;
-	if (!(cmap->green = kmalloc(size, GFP_ATOMIC)))
-	    goto fail;
-	if (!(cmap->blue = kmalloc(size, GFP_ATOMIC)))
-	    goto fail;
-	if (transp) {
-	    if (!(cmap->transp = kmalloc(size, GFP_ATOMIC)))
+	if (cmap->len != len) {
+		fb_dealloc_cmap(cmap);
+		if (!len)
+			return 0;
+
+		cmap->red = kmalloc(size, flags);
+		if (!cmap->red)
+			goto fail;
+		cmap->green = kmalloc(size, flags);
+		if (!cmap->green)
+			goto fail;
+		cmap->blue = kmalloc(size, flags);
+		if (!cmap->blue)
+			goto fail;
+		if (transp) {
+			cmap->transp = kmalloc(size, flags);
+			if (!cmap->transp)
+				goto fail;
+		} else {
+			cmap->transp = NULL;
+		}
+	}
+	cmap->start = 0;
+	cmap->len = len;
+	ret = fb_copy_cmap(fb_default_cmap(len), cmap);
+	if (ret)
 		goto fail;
-	} else
-	    cmap->transp = NULL;
-    }
-    cmap->start = 0;
-    cmap->len = len;
-    fb_copy_cmap(fb_default_cmap(len), cmap);
-    return 0;
+	return 0;
 
 fail:
-    fb_dealloc_cmap(cmap);
-    return -ENOMEM;
+	fb_dealloc_cmap(cmap);
+	return ret;
+}
+
+int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp)
+{
+	return fb_alloc_cmap_gfp(cmap, len, transp, GFP_ATOMIC);
 }
 
 /**
@@ -250,8 +264,12 @@
 	int rc, size = cmap->len * sizeof(u16);
 	struct fb_cmap umap;
 
+	if (size < 0 || size < cmap->len)
+		return -E2BIG;
+
 	memset(&umap, 0, sizeof(struct fb_cmap));
-	rc = fb_alloc_cmap(&umap, cmap->len, cmap->transp != NULL);
+	rc = fb_alloc_cmap_gfp(&umap, cmap->len, cmap->transp != NULL,
+				GFP_KERNEL);
 	if (rc)
 		return rc;
 	if (copy_from_user(umap.red, cmap->red, size) ||
diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
index bc35a95..85ec7f6 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/geode/lxfb_ops.c
@@ -276,10 +276,10 @@
 		write_fp(par, FP_PT1, 0);
 		temp = FP_PT2_SCRC;
 
-		if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+		if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
 			temp |= FP_PT2_HSP;
 
-		if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+		if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
 			temp |= FP_PT2_VSP;
 
 		write_fp(par, FP_PT2, temp);
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 7cfc170..ca0f6be 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 
+#include <mach/dma.h>
 #include <mach/hardware.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
@@ -1420,6 +1421,9 @@
 	struct device *dev;
 	struct mx3fb_platform_data *mx3fb_pdata;
 
+	if (!imx_dma_is_ipu(chan))
+		return false;
+
 	if (!rq)
 		return false;
 
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 9b13647..b02d97a 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -860,7 +860,7 @@
 		/* Couldn't reconfigure, hopefully, can continue as before */
 		return;
 
-	info->fix.line_length = mode2.xres * (ch->cfg.bpp / 8);
+	info->fix.line_length = mode1.xres * (ch->cfg.bpp / 8);
 
 	/*
 	 * fb_set_var() calls the notifier change internally, only if
@@ -868,7 +868,7 @@
 	 * user event, we have to call the chain ourselves.
 	 */
 	event.info = info;
-	event.data = &mode2;
+	event.data = &mode1;
 	fb_notifier_call_chain(evnt, &event);
 }
 
diff --git a/drivers/video/sis/init.c b/drivers/video/sis/init.c
index c311ad3..31137ad 100644
--- a/drivers/video/sis/init.c
+++ b/drivers/video/sis/init.c
@@ -62,11 +62,11 @@
 
 #include "init.h"
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 #include "300vtbl.h"
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 #include "310vtbl.h"
 #endif
 
@@ -78,7 +78,7 @@
 /*         POINTER INITIALIZATION            */
 /*********************************************/
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static void
 InitCommonPointer(struct SiS_Private *SiS_Pr)
 {
@@ -160,7 +160,7 @@
 }
 #endif
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static void
 InitTo300Pointer(struct SiS_Private *SiS_Pr)
 {
@@ -237,7 +237,7 @@
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 InitTo310Pointer(struct SiS_Private *SiS_Pr)
 {
@@ -321,13 +321,13 @@
 SiSInitPtr(struct SiS_Private *SiS_Pr)
 {
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       InitTo300Pointer(SiS_Pr);
 #else
       return false;
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       InitTo310Pointer(SiS_Pr);
 #else
       return false;
@@ -340,9 +340,7 @@
 /*            HELPER: Get ModeID             */
 /*********************************************/
 
-#ifndef SIS_XORG_XF86
 static
-#endif
 unsigned short
 SiS_GetModeID(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDisplay,
 		int Depth, bool FSTN, int LCDwidth, int LCDheight)
@@ -884,51 +882,51 @@
 void
 SiS_SetReg(SISIOADDRESS port, unsigned short index, unsigned short data)
 {
-   OutPortByte(port, index);
-   OutPortByte(port + 1, data);
+	outb((u8)index, port);
+	outb((u8)data, port + 1);
 }
 
 void
 SiS_SetRegByte(SISIOADDRESS port, unsigned short data)
 {
-   OutPortByte(port, data);
+	outb((u8)data, port);
 }
 
 void
 SiS_SetRegShort(SISIOADDRESS port, unsigned short data)
 {
-   OutPortWord(port, data);
+	outw((u16)data, port);
 }
 
 void
 SiS_SetRegLong(SISIOADDRESS port, unsigned int data)
 {
-   OutPortLong(port, data);
+	outl((u32)data, port);
 }
 
 unsigned char
 SiS_GetReg(SISIOADDRESS port, unsigned short index)
 {
-   OutPortByte(port, index);
-   return(InPortByte(port + 1));
+	outb((u8)index, port);
+	return inb(port + 1);
 }
 
 unsigned char
 SiS_GetRegByte(SISIOADDRESS port)
 {
-   return(InPortByte(port));
+	return inb(port);
 }
 
 unsigned short
 SiS_GetRegShort(SISIOADDRESS port)
 {
-   return(InPortWord(port));
+	return inw(port);
 }
 
 unsigned int
 SiS_GetRegLong(SISIOADDRESS port)
 {
-   return(InPortLong(port));
+	return inl(port);
 }
 
 void
@@ -1089,7 +1087,7 @@
 SiSInitPCIetc(struct SiS_Private *SiS_Pr)
 {
    switch(SiS_Pr->ChipType) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    case SIS_300:
    case SIS_540:
    case SIS_630:
@@ -1108,7 +1106,7 @@
       SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x5A);
       break;
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    case SIS_315H:
    case SIS_315:
    case SIS_315PRO:
@@ -1152,9 +1150,7 @@
 /*             HELPER: SetLVDSetc            */
 /*********************************************/
 
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiSSetLVDSetc(struct SiS_Private *SiS_Pr)
 {
@@ -1174,7 +1170,7 @@
    if((temp == 1) || (temp == 2)) return;
 
    switch(SiS_Pr->ChipType) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    case SIS_540:
    case SIS_630:
    case SIS_730:
@@ -1188,7 +1184,7 @@
 	}
 	break;
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    case SIS_550:
    case SIS_650:
    case SIS_740:
@@ -1420,9 +1416,7 @@
 /*             HELPER: GetVBType             */
 /*********************************************/
 
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiS_GetVBType(struct SiS_Private *SiS_Pr)
 {
@@ -1487,7 +1481,6 @@
 /*           HELPER: Check RAM size          */
 /*********************************************/
 
-#ifdef SIS_LINUX_KERNEL
 static bool
 SiS_CheckMemorySize(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 		unsigned short ModeIdIndex)
@@ -1501,13 +1494,12 @@
    if(AdapterMemSize < memorysize) return false;
    return true;
 }
-#endif
 
 /*********************************************/
 /*           HELPER: Get DRAM type           */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static unsigned char
 SiS_Get310DRAMType(struct SiS_Private *SiS_Pr)
 {
@@ -1574,7 +1566,6 @@
 /*           HELPER: ClearBuffer             */
 /*********************************************/
 
-#ifdef SIS_LINUX_KERNEL
 static void
 SiS_ClearBuffer(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 {
@@ -1587,7 +1578,7 @@
 
    if(SiS_Pr->SiS_ModeType >= ModeEGA) {
       if(ModeNo > 0x13) {
-	 SiS_SetMemory(memaddr, memsize, 0);
+	 memset_io(memaddr, 0, memsize);
       } else {
 	 pBuffer = (unsigned short SISIOMEMTYPE *)memaddr;
 	 for(i = 0; i < 0x4000; i++) writew(0x0000, &pBuffer[i]);
@@ -1596,10 +1587,9 @@
       pBuffer = (unsigned short SISIOMEMTYPE *)memaddr;
       for(i = 0; i < 0x4000; i++) writew(0x0720, &pBuffer[i]);
    } else {
-      SiS_SetMemory(memaddr, 0x8000, 0);
+      memset_io(memaddr, 0, 0x8000);
    }
 }
-#endif
 
 /*********************************************/
 /*           HELPER: SearchModeID            */
@@ -2132,7 +2122,7 @@
       SiS_SetReg(SiS_Pr->SiS_P3d4,0x14,0x4F);
    }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType == XGI_20) {
       SiS_SetReg(SiS_Pr->SiS_P3d4,0x04,crt1data[4] - 1);
       if(!(temp = crt1data[5] & 0x1f)) {
@@ -2215,7 +2205,7 @@
    SiS_SetReg(SiS_Pr->SiS_P3c4,0x2c,clkb);
 
    if(SiS_Pr->ChipType >= SIS_315H) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       SiS_SetReg(SiS_Pr->SiS_P3c4,0x2D,0x01);
       if(SiS_Pr->ChipType == XGI_20) {
          unsigned short mf = SiS_GetModeFlag(SiS_Pr, ModeNo, ModeIdIndex);
@@ -2236,7 +2226,7 @@
 /*                  FIFO                     */
 /*********************************************/
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 void
 SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *idx1,
 		unsigned short *idx2)
@@ -2506,11 +2496,7 @@
    SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x09,0x80,data);
 
   /* Write foreground and background queue */
-#ifdef SIS_LINUX_KERNEL
    templ = sisfb_read_nbridge_pci_dword(SiS_Pr, 0x50);
-#else
-   templ = pciReadLong(0x00000000, 0x50);
-#endif
 
    if(SiS_Pr->ChipType == SIS_730) {
 
@@ -2530,13 +2516,8 @@
 
    }
 
-#ifdef SIS_LINUX_KERNEL
    sisfb_write_nbridge_pci_dword(SiS_Pr, 0x50, templ);
    templ = sisfb_read_nbridge_pci_dword(SiS_Pr, 0xA0);
-#else
-   pciWriteLong(0x00000000, 0x50, templ);
-   templ = pciReadLong(0x00000000, 0xA0);
-#endif
 
    /* GUI grant timer (PCI config 0xA3) */
    if(SiS_Pr->ChipType == SIS_730) {
@@ -2552,15 +2533,11 @@
 
    }
 
-#ifdef SIS_LINUX_KERNEL
    sisfb_write_nbridge_pci_dword(SiS_Pr, 0xA0, templ);
-#else
-   pciWriteLong(0x00000000, 0xA0, templ);
-#endif
 }
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_SetCRT1FIFO_310(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex)
 {
@@ -2612,7 +2589,7 @@
    }
 
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       if(VCLK > 150) data |= 0x80;
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x07,0x7B,data);
 
@@ -2621,7 +2598,7 @@
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xF7,data);
 #endif
    } else if(SiS_Pr->ChipType < XGI_20) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       if(VCLK >= 166) data |= 0x0c;
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xf3,data);
 
@@ -2630,7 +2607,7 @@
       }
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       if(VCLK >= 200) data |= 0x0c;
       if(SiS_Pr->ChipType == XGI_20) data &= ~0x04;
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xf3,data);
@@ -2675,7 +2652,7 @@
 		unsigned short ModeIdIndex, unsigned short RRTI)
 {
    unsigned short data, infoflag = 0, modeflag, resindex;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned char  *ROMAddr  = SiS_Pr->VirtualRomBase;
    unsigned short data2, data3;
 #endif
@@ -2736,7 +2713,7 @@
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x0F,0xB7,data);
    }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x31,0xfb);
    }
@@ -2826,7 +2803,7 @@
 
    SiS_SetVCLKState(SiS_Pr, ModeNo, RRTI, ModeIdIndex);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(((SiS_Pr->ChipType >= SIS_315H) && (SiS_Pr->ChipType < SIS_661)) ||
        (SiS_Pr->ChipType == XGI_40)) {
       if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x31) & 0x40) {
@@ -2845,7 +2822,7 @@
 #endif
 }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_SetupDualChip(struct SiS_Private *SiS_Pr)
 {
@@ -2999,11 +2976,6 @@
    SiS_Pr->SiS_SelectCRT2Rate = 0;
    SiS_Pr->SiS_SetFlag &= (~ProgrammingCRT2);
 
-#ifdef SIS_XORG_XF86
-   xf86DrvMsgVerb(0, X_PROBED, 4, "(init: VBType=0x%04x, VBInfo=0x%04x)\n",
-                    SiS_Pr->SiS_VBType, SiS_Pr->SiS_VBInfo);
-#endif
-
    if(SiS_Pr->SiS_VBInfo & SetSimuScanMode) {
       if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) {
          SiS_Pr->SiS_SetFlag |= ProgrammingCRT2;
@@ -3028,7 +3000,7 @@
    }
 
    switch(SiS_Pr->ChipType) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    case SIS_300:
       SiS_SetCRT1FIFO_300(SiS_Pr, ModeNo, RefreshRateTableIndex);
       break;
@@ -3039,7 +3011,7 @@
       break;
 #endif
    default:
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       if(SiS_Pr->ChipType == XGI_20) {
          unsigned char sr2b = 0, sr2c = 0;
          switch(ModeNo) {
@@ -3062,7 +3034,7 @@
 
    SiS_SetCRT1ModeRegs(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType == XGI_40) {
       SiS_SetupDualChip(SiS_Pr);
    }
@@ -3070,11 +3042,9 @@
 
    SiS_LoadDAC(SiS_Pr, ModeNo, ModeIdIndex);
 
-#ifdef SIS_LINUX_KERNEL
    if(SiS_Pr->SiS_flag_clearbuffer) {
       SiS_ClearBuffer(SiS_Pr, ModeNo);
    }
-#endif
 
    if(!(SiS_Pr->SiS_VBInfo & (SetSimuScanMode | SwitchCRT2 | SetCRT2ToLCDA))) {
       SiS_WaitRetrace1(SiS_Pr);
@@ -3104,7 +3074,7 @@
 static void
 SiS_ResetVB(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned char  *ROMAddr = SiS_Pr->VirtualRomBase;
    unsigned short temp;
 
@@ -3139,7 +3109,7 @@
     * which locks CRT2 in some way to CRT1 timing. Disable
     * this here.
     */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if((IS_SIS651) || (IS_SISM650) ||
       SiS_Pr->ChipType == SIS_340 ||
       SiS_Pr->ChipType == XGI_40) {
@@ -3160,7 +3130,7 @@
 static void
 SiS_Handle760(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned int somebase;
    unsigned char temp1, temp2, temp3;
 
@@ -3170,11 +3140,7 @@
        (!(SiS_Pr->SiS_SysFlags & SF_760UMA)) )
       return;
 
-#ifdef SIS_LINUX_KERNEL
    somebase = sisfb_read_mio_pci_word(SiS_Pr, 0x74);
-#else
-   somebase = pciReadWord(0x00001000, 0x74);
-#endif
    somebase &= 0xffff;
 
    if(somebase == 0) return;
@@ -3190,105 +3156,34 @@
       temp2 = 0x0b;
    }
 
-#ifdef SIS_LINUX_KERNEL
    sisfb_write_nbridge_pci_byte(SiS_Pr, 0x7e, temp1);
    sisfb_write_nbridge_pci_byte(SiS_Pr, 0x8d, temp2);
-#else
-   pciWriteByte(0x00000000, 0x7e, temp1);
-   pciWriteByte(0x00000000, 0x8d, temp2);
-#endif
 
    SiS_SetRegByte((somebase + 0x85), temp3);
 #endif
 }
 
 /*********************************************/
-/*      X.org/XFree86: SET SCREEN PITCH      */
-/*********************************************/
-
-#ifdef SIS_XORG_XF86
-static void
-SiS_SetPitchCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
-   SISPtr pSiS = SISPTR(pScrn);
-   unsigned short HDisplay = pSiS->scrnPitch >> 3;
-
-   SiS_SetReg(SiS_Pr->SiS_P3d4,0x13,(HDisplay & 0xFF));
-   SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x0E,0xF0,(HDisplay >> 8));
-}
-
-static void
-SiS_SetPitchCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
-   SISPtr pSiS = SISPTR(pScrn);
-   unsigned short HDisplay = pSiS->scrnPitch2 >> 3;
-
-    /* Unlock CRT2 */
-   if(pSiS->VGAEngine == SIS_315_VGA)
-      SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2F, 0x01);
-   else
-      SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x24, 0x01);
-
-   SiS_SetReg(SiS_Pr->SiS_Part1Port,0x07,(HDisplay & 0xFF));
-   SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x09,0xF0,(HDisplay >> 8));
-}
-
-static void
-SiS_SetPitch(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
-   SISPtr pSiS = SISPTR(pScrn);
-   bool isslavemode = false;
-
-   if( (pSiS->VBFlags2 & VB2_VIDEOBRIDGE) &&
-       ( ((pSiS->VGAEngine == SIS_300_VGA) &&
-	  (SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0xa0) == 0x20) ||
-	 ((pSiS->VGAEngine == SIS_315_VGA) &&
-	  (SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x50) == 0x10) ) ) {
-      isslavemode = true;
-   }
-
-   /* We need to set pitch for CRT1 if bridge is in slave mode, too */
-   if((pSiS->VBFlags & DISPTYPE_DISP1) || (isslavemode)) {
-      SiS_SetPitchCRT1(SiS_Pr, pScrn);
-   }
-   /* We must not set the pitch for CRT2 if bridge is in slave mode */
-   if((pSiS->VBFlags & DISPTYPE_DISP2) && (!isslavemode)) {
-      SiS_SetPitchCRT2(SiS_Pr, pScrn);
-   }
-}
-#endif
-
-/*********************************************/
 /*                 SiSSetMode()              */
 /*********************************************/
 
-#ifdef SIS_XORG_XF86
-/* We need pScrn for setting the pitch correctly */
-bool
-SiSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, unsigned short ModeNo, bool dosetpitch)
-#else
 bool
 SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
-#endif
 {
    SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
    unsigned short RealModeNo, ModeIdIndex;
    unsigned char  backupreg = 0;
-#ifdef SIS_LINUX_KERNEL
    unsigned short KeepLockReg;
 
    SiS_Pr->UseCustomMode = false;
    SiS_Pr->CRT1UsesCustomMode = false;
-#endif
 
    SiS_Pr->SiS_flag_clearbuffer = 0;
 
    if(SiS_Pr->UseCustomMode) {
       ModeNo = 0xfe;
    } else {
-#ifdef SIS_LINUX_KERNEL
       if(!(ModeNo & 0x80)) SiS_Pr->SiS_flag_clearbuffer = 1;
-#endif
       ModeNo &= 0x7f;
    }
 
@@ -3301,13 +3196,8 @@
    SiS_GetSysFlags(SiS_Pr);
 
    SiS_Pr->SiS_VGAINFO = 0x11;
-#if defined(SIS_XORG_XF86) && (defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__))
-   if(pScrn) SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#endif
 
-#ifdef SIS_LINUX_KERNEL
    KeepLockReg = SiS_GetReg(SiS_Pr->SiS_P3c4,0x05);
-#endif
    SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
 
    SiSInitPCIetc(SiS_Pr);
@@ -3344,12 +3234,10 @@
    SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
    SiS_SetLowModeTest(SiS_Pr, ModeNo);
 
-#ifdef SIS_LINUX_KERNEL
    /* Check memory size (kernel framebuffer driver only) */
    if(!SiS_CheckMemorySize(SiS_Pr, ModeNo, ModeIdIndex)) {
       return false;
    }
-#endif
 
    SiS_OpenCRTC(SiS_Pr);
 
@@ -3384,7 +3272,7 @@
    SiS_DisplayOn(SiS_Pr);
    SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
 	 if(!(SiS_IsDualEdge(SiS_Pr))) {
@@ -3396,7 +3284,7 @@
 
    if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
       if(SiS_Pr->ChipType >= SIS_315H) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	 if(!SiS_Pr->SiS_ROMNew) {
 	    if(SiS_IsVAMode(SiS_Pr)) {
 	       SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x35,0x01);
@@ -3424,424 +3312,16 @@
       }
    }
 
-#ifdef SIS_XORG_XF86
-   if(pScrn) {
-      /* SetPitch: Adapt to virtual size & position */
-      if((ModeNo > 0x13) && (dosetpitch)) {
-	 SiS_SetPitch(SiS_Pr, pScrn);
-      }
-
-      /* Backup/Set ModeNo in BIOS scratch area */
-      SiS_GetSetModeID(pScrn, ModeNo);
-   }
-#endif
-
    SiS_CloseCRTC(SiS_Pr);
 
    SiS_Handle760(SiS_Pr);
 
-#ifdef SIS_LINUX_KERNEL
    /* We never lock registers in XF86 */
    if(KeepLockReg != 0xA1) SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x00);
-#endif
 
    return true;
 }
 
-/*********************************************/
-/*       X.org/XFree86: SiSBIOSSetMode()     */
-/*           for non-Dual-Head mode          */
-/*********************************************/
-
-#ifdef SIS_XORG_XF86
-bool
-SiSBIOSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-               DisplayModePtr mode, bool IsCustom)
-{
-   SISPtr pSiS = SISPTR(pScrn);
-   unsigned short ModeNo = 0;
-
-   SiS_Pr->UseCustomMode = false;
-
-   if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
-      xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, "Setting custom mode %dx%d\n",
-		SiS_Pr->CHDisplay,
-		(mode->Flags & V_INTERLACE ? SiS_Pr->CVDisplay * 2 :
-		   (mode->Flags & V_DBLSCAN ? SiS_Pr->CVDisplay / 2 :
-		      SiS_Pr->CVDisplay)));
-
-   } else {
-
-      /* Don't need vbflags here; checks done earlier */
-      ModeNo = SiS_GetModeNumber(pScrn, mode, pSiS->VBFlags);
-      if(!ModeNo) return false;
-
-      xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, "Setting standard mode 0x%x\n", ModeNo);
-
-   }
-
-   return(SiSSetMode(SiS_Pr, pScrn, ModeNo, true));
-}
-
-/*********************************************/
-/*    X.org/XFree86: SiSBIOSSetModeCRT2()    */
-/*           for Dual-Head modes             */
-/*********************************************/
-
-bool
-SiSBIOSSetModeCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-               DisplayModePtr mode, bool IsCustom)
-{
-   SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
-   SISPtr  pSiS = SISPTR(pScrn);
-#ifdef SISDUALHEAD
-   SISEntPtr pSiSEnt = pSiS->entityPrivate;
-#endif
-   unsigned short ModeIdIndex;
-   unsigned short ModeNo = 0;
-   unsigned char  backupreg = 0;
-
-   SiS_Pr->UseCustomMode = false;
-
-   /* Remember: Custom modes for CRT2 are ONLY supported
-    *     -) on the 30x/B/C, and
-    *     -) if CRT2 is LCD or VGA, or CRT1 is LCDA
-    */
-
-   if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
-	 ModeNo = 0xfe;
-
-   } else {
-
-	 ModeNo = SiS_GetModeNumber(pScrn, mode, pSiS->VBFlags);
-	 if(!ModeNo) return false;
-
-   }
-
-   SiSRegInit(SiS_Pr, BaseAddr);
-   SiSInitPtr(SiS_Pr);
-   SiS_GetSysFlags(SiS_Pr);
-#if defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__)
-   SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#else
-   SiS_Pr->SiS_VGAINFO = 0x11;
-#endif
-
-   SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
-
-   SiSInitPCIetc(SiS_Pr);
-   SiSSetLVDSetc(SiS_Pr);
-   SiSDetermineROMUsage(SiS_Pr);
-
-   /* Save mode info so we can set it from within SetMode for CRT1 */
-#ifdef SISDUALHEAD
-   if(pSiS->DualHeadMode) {
-      pSiSEnt->CRT2ModeNo = ModeNo;
-      pSiSEnt->CRT2DMode = mode;
-      pSiSEnt->CRT2IsCustom = IsCustom;
-      pSiSEnt->CRT2CR30 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30);
-      pSiSEnt->CRT2CR31 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31);
-      pSiSEnt->CRT2CR35 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
-      pSiSEnt->CRT2CR38 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-#if 0
-      /* We can't set CRT2 mode before CRT1 mode is set - says who...? */
-      if(pSiSEnt->CRT1ModeNo == -1) {
-	 xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-		"Setting CRT2 mode delayed until after setting CRT1 mode\n");
-	 return true;
-      }
-#endif
-      pSiSEnt->CRT2ModeSet = true;
-   }
-#endif
-
-   if(SiS_Pr->UseCustomMode) {
-
-      unsigned short temptemp = SiS_Pr->CVDisplay;
-
-      if(SiS_Pr->CModeFlag & DoubleScanMode)     temptemp >>= 1;
-      else if(SiS_Pr->CInfoFlag & InterlaceMode) temptemp <<= 1;
-
-      xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-	  "Setting custom mode %dx%d on CRT2\n",
-	  SiS_Pr->CHDisplay, temptemp);
-
-   } else {
-
-      xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-	  "Setting standard mode 0x%x on CRT2\n", ModeNo);
-
-   }
-
-   SiS_UnLockCRT2(SiS_Pr);
-
-   if(!SiS_Pr->UseCustomMode) {
-      if(!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex))) return false;
-   } else {
-      ModeIdIndex = 0;
-   }
-
-   SiS_GetVBType(SiS_Pr);
-
-   SiS_InitVB(SiS_Pr);
-   if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
-      if(SiS_Pr->ChipType >= SIS_315H) {
-	 SiS_ResetVB(SiS_Pr);
-	 SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x32,0x10);
-	 SiS_SetRegOR(SiS_Pr->SiS_Part2Port,0x00,0x0c);
-	 backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-      } else {
-	 backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
-      }
-   }
-
-   /* Get VB information (connectors, connected devices) */
-   if(!SiS_Pr->UseCustomMode) {
-      SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 1);
-   } else {
-      /* If this is a custom mode, we don't check the modeflag for CRT2Mode */
-      SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 0);
-   }
-   SiS_SetYPbPr(SiS_Pr);
-   SiS_SetTVMode(SiS_Pr, ModeNo, ModeIdIndex);
-   SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
-   SiS_SetLowModeTest(SiS_Pr, ModeNo);
-
-   SiS_ResetSegmentRegisters(SiS_Pr);
-
-   /* Set mode on CRT2 */
-   if( (SiS_Pr->SiS_VBType & VB_SISVB)    ||
-       (SiS_Pr->SiS_IF_DEF_LVDS     == 1) ||
-       (SiS_Pr->SiS_IF_DEF_CH70xx   != 0) ||
-       (SiS_Pr->SiS_IF_DEF_TRUMPION != 0) ) {
-      SiS_SetCRT2Group(SiS_Pr, ModeNo);
-   }
-
-   SiS_StrangeStuff(SiS_Pr);
-
-   SiS_DisplayOn(SiS_Pr);
-   SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
-
-   if(SiS_Pr->ChipType >= SIS_315H) {
-      if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
-	 if(!(SiS_IsDualEdge(SiS_Pr))) {
-	    SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x13,0xfb);
-	 }
-      }
-   }
-
-   if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
-      if(SiS_Pr->ChipType >= SIS_315H) {
-	 if(!SiS_Pr->SiS_ROMNew) {
-	    if(SiS_IsVAMode(SiS_Pr)) {
-	       SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x35,0x01);
-	    } else {
-	       SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x35,0xFE);
-	    }
-	 }
-
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupreg);
-
-	 if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x30) & SetCRT2ToLCD) {
-	    SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x38,0xfc);
-	 }
-      } else if((SiS_Pr->ChipType == SIS_630) ||
-	        (SiS_Pr->ChipType == SIS_730)) {
-         SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupreg);
-      }
-   }
-
-   /* SetPitch: Adapt to virtual size & position */
-   SiS_SetPitchCRT2(SiS_Pr, pScrn);
-
-   SiS_Handle760(SiS_Pr);
-
-   return true;
-}
-
-/*********************************************/
-/*    X.org/XFree86: SiSBIOSSetModeCRT1()    */
-/*           for Dual-Head modes             */
-/*********************************************/
-
-bool
-SiSBIOSSetModeCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-                   DisplayModePtr mode, bool IsCustom)
-{
-   SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
-   SISPtr  pSiS = SISPTR(pScrn);
-   unsigned short ModeIdIndex, ModeNo = 0;
-   unsigned char  backupreg = 0;
-#ifdef SISDUALHEAD
-   SISEntPtr pSiSEnt = pSiS->entityPrivate;
-   unsigned char  backupcr30, backupcr31, backupcr38, backupcr35, backupp40d=0;
-   bool backupcustom;
-#endif
-
-   SiS_Pr->UseCustomMode = false;
-
-   if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
-	 unsigned short temptemp = SiS_Pr->CVDisplay;
-
-	 if(SiS_Pr->CModeFlag & DoubleScanMode)     temptemp >>= 1;
-	 else if(SiS_Pr->CInfoFlag & InterlaceMode) temptemp <<= 1;
-
-	 xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-	 	"Setting custom mode %dx%d on CRT1\n",
-	 	SiS_Pr->CHDisplay, temptemp);
-	 ModeNo = 0xfe;
-
-   } else {
-
-	 ModeNo = SiS_GetModeNumber(pScrn, mode, 0); /* don't give VBFlags */
-	 if(!ModeNo) return false;
-
-	 xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-	 	"Setting standard mode 0x%x on CRT1\n", ModeNo);
-   }
-
-   SiSInitPtr(SiS_Pr);
-   SiSRegInit(SiS_Pr, BaseAddr);
-   SiS_GetSysFlags(SiS_Pr);
-#if defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__)
-   SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#else
-   SiS_Pr->SiS_VGAINFO = 0x11;
-#endif
-
-   SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
-
-   SiSInitPCIetc(SiS_Pr);
-   SiSSetLVDSetc(SiS_Pr);
-   SiSDetermineROMUsage(SiS_Pr);
-
-   SiS_UnLockCRT2(SiS_Pr);
-
-   if(!SiS_Pr->UseCustomMode) {
-      if(!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex))) return false;
-   } else {
-      ModeIdIndex = 0;
-   }
-
-   /* Determine VBType */
-   SiS_GetVBType(SiS_Pr);
-
-   SiS_InitVB(SiS_Pr);
-   if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
-      if(SiS_Pr->ChipType >= SIS_315H) {
-         backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-      } else {
-         backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
-      }
-   }
-
-   /* Get VB information (connectors, connected devices) */
-   /* (We don't care if the current mode is a CRT2 mode) */
-   SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 0);
-   SiS_SetYPbPr(SiS_Pr);
-   SiS_SetTVMode(SiS_Pr, ModeNo, ModeIdIndex);
-   SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
-   SiS_SetLowModeTest(SiS_Pr, ModeNo);
-
-   SiS_OpenCRTC(SiS_Pr);
-
-   /* Set mode on CRT1 */
-   SiS_SetCRT1Group(SiS_Pr, ModeNo, ModeIdIndex);
-   if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
-      SiS_SetCRT2Group(SiS_Pr, ModeNo);
-   }
-
-   /* SetPitch: Adapt to virtual size & position */
-   SiS_SetPitchCRT1(SiS_Pr, pScrn);
-
-   SiS_HandleCRT1(SiS_Pr);
-
-   SiS_StrangeStuff(SiS_Pr);
-
-   SiS_CloseCRTC(SiS_Pr);
-
-#ifdef SISDUALHEAD
-   if(pSiS->DualHeadMode) {
-      pSiSEnt->CRT1ModeNo = ModeNo;
-      pSiSEnt->CRT1DMode = mode;
-   }
-#endif
-
-   if(SiS_Pr->UseCustomMode) {
-      SiS_Pr->CRT1UsesCustomMode = true;
-      SiS_Pr->CSRClock_CRT1 = SiS_Pr->CSRClock;
-      SiS_Pr->CModeFlag_CRT1 = SiS_Pr->CModeFlag;
-   } else {
-      SiS_Pr->CRT1UsesCustomMode = false;
-   }
-
-   /* Reset CRT2 if changing mode on CRT1 */
-#ifdef SISDUALHEAD
-   if(pSiS->DualHeadMode) {
-      if(pSiSEnt->CRT2ModeNo != -1) {
-	 xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-				"(Re-)Setting mode for CRT2\n");
-	 backupcustom = SiS_Pr->UseCustomMode;
-	 backupcr30 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30);
-	 backupcr31 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31);
-	 backupcr35 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
-	 backupcr38 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-	 if(SiS_Pr->SiS_VBType & VB_SISVB) {
-	    /* Backup LUT-enable */
-	    if(pSiSEnt->CRT2ModeSet) {
-	       backupp40d = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x0d) & 0x08;
-	    }
-	 }
-	 if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
-	    SiS_SetReg(SiS_Pr->SiS_P3d4,0x30,pSiSEnt->CRT2CR30);
-	    SiS_SetReg(SiS_Pr->SiS_P3d4,0x31,pSiSEnt->CRT2CR31);
-	    SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,pSiSEnt->CRT2CR35);
-	    SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,pSiSEnt->CRT2CR38);
-	 }
-
-	 SiSBIOSSetModeCRT2(SiS_Pr, pSiSEnt->pScrn_1,
-			    pSiSEnt->CRT2DMode, pSiSEnt->CRT2IsCustom);
-
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x30,backupcr30);
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x31,backupcr31);
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupcr35);
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupcr38);
-	 if(SiS_Pr->SiS_VBType & VB_SISVB) {
-	    SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x0d, ~0x08, backupp40d);
-	 }
-	 SiS_Pr->UseCustomMode = backupcustom;
-      }
-   }
-#endif
-
-   /* Warning: From here, the custom mode entries in SiS_Pr are
-    * possibly overwritten
-    */
-
-   SiS_DisplayOn(SiS_Pr);
-   SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
-
-   if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
-      if(SiS_Pr->ChipType >= SIS_315H) {
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupreg);
-      } else if((SiS_Pr->ChipType == SIS_630) ||
-                (SiS_Pr->ChipType == SIS_730)) {
-         SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupreg);
-      }
-   }
-
-   SiS_Handle760(SiS_Pr);
-
-   /* Backup/Set ModeNo in BIOS scratch area */
-   SiS_GetSetModeID(pScrn,ModeNo);
-
-   return true;
-}
-#endif /* Linux_XF86 */
-
 #ifndef GETBITSTR
 #define BITMASK(h,l)    	(((unsigned)(1U << ((h)-(l)+1))-1)<<(l))
 #define GENMASK(mask)   	BITMASK(1?mask,0?mask)
@@ -3927,7 +3407,7 @@
    SiS_Pr->CVBlankStart = SiS_Pr->SiS_VGAVDE;
 
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       tempbx = SiS_Pr->SiS_VGAHT;
       if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
          tempbx = SiS_Pr->PanelHT;
@@ -3936,7 +3416,7 @@
       remaining = tempbx % 8;
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       /* OK for LCDA, LVDS */
       tempbx = SiS_Pr->PanelHT - SiS_Pr->PanelXRes;
       tempax = SiS_Pr->SiS_VGAHDE;  /* not /2 ! */
@@ -3950,7 +3430,7 @@
    SiS_Pr->CHTotal = SiS_Pr->CHBlankEnd = tempbx;
 
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       if(SiS_Pr->SiS_VGAHDE == SiS_Pr->PanelXRes) {
 	 SiS_Pr->CHSyncStart = SiS_Pr->SiS_VGAHDE + ((SiS_Pr->PanelHRS + 1) & ~1);
 	 SiS_Pr->CHSyncEnd = SiS_Pr->CHSyncStart + SiS_Pr->PanelHRE;
@@ -3982,7 +3462,7 @@
       }
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       tempax = VGAHDE;
       if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
 	 tempbx = SiS_Pr->PanelXRes;
@@ -4001,7 +3481,7 @@
    if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
       tempax = SiS_Pr->PanelYRes;
    } else if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       /* Stupid hack for 640x400/320x200 */
       if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) {
 	 if((tempax + tempbx) == 438) tempbx += 16;
@@ -4054,36 +3534,12 @@
    if(modeflag & DoubleScanMode) tempax |= 0x80;
    SiS_SetRegANDOR(SiS_Pr->SiS_P3d4,0x09,0x5F,tempax);
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO, "%d %d %d %d  %d %d %d %d  (%d %d %d %d)\n",
-	SiS_Pr->CHDisplay, SiS_Pr->CHSyncStart, SiS_Pr->CHSyncEnd, SiS_Pr->CHTotal,
-	SiS_Pr->CVDisplay, SiS_Pr->CVSyncStart, SiS_Pr->CVSyncEnd, SiS_Pr->CVTotal,
-	SiS_Pr->CHBlankStart, SiS_Pr->CHBlankEnd, SiS_Pr->CVBlankStart, SiS_Pr->CVBlankEnd);
-   xf86DrvMsg(0, X_INFO, " {{0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
-	SiS_Pr->CCRT1CRTC[0], SiS_Pr->CCRT1CRTC[1],
-	SiS_Pr->CCRT1CRTC[2], SiS_Pr->CCRT1CRTC[3],
-	SiS_Pr->CCRT1CRTC[4], SiS_Pr->CCRT1CRTC[5],
-	SiS_Pr->CCRT1CRTC[6], SiS_Pr->CCRT1CRTC[7]);
-   xf86DrvMsg(0, X_INFO, "   0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
-	SiS_Pr->CCRT1CRTC[8], SiS_Pr->CCRT1CRTC[9],
-	SiS_Pr->CCRT1CRTC[10], SiS_Pr->CCRT1CRTC[11],
-	SiS_Pr->CCRT1CRTC[12], SiS_Pr->CCRT1CRTC[13],
-	SiS_Pr->CCRT1CRTC[14], SiS_Pr->CCRT1CRTC[15]);
-   xf86DrvMsg(0, X_INFO, "   0x%02x}},\n", SiS_Pr->CCRT1CRTC[16]);
-#endif
-#endif
 }
 
 void
 SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
 			int xres, int yres,
-#ifdef SIS_XORG_XF86
-			DisplayModePtr current
-#endif
-#ifdef SIS_LINUX_KERNEL
 			struct fb_var_screeninfo *var, bool writeres
-#endif
 )
 {
    unsigned short HRE, HBE, HRS, HBS, HDE, HT;
@@ -4127,25 +3583,10 @@
 
    D = B - F - C;
 
-#ifdef SIS_XORG_XF86
-   current->HDisplay   = (E * 8);
-   current->HSyncStart = (E * 8) + (F * 8);
-   current->HSyncEnd   = (E * 8) + (F * 8) + (C * 8);
-   current->HTotal     = (E * 8) + (F * 8) + (C * 8) + (D * 8);
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO,
-		"H: A %d B %d C %d D %d E %d F %d  HT %d HDE %d HRS %d HBS %d HBE %d HRE %d\n",
-		A, B, C, D, E, F, HT, HDE, HRS, HBS, HBE, HRE);
-#else
-   (void)VBS;  (void)HBS;  (void)A;
-#endif
-#endif
-#ifdef SIS_LINUX_KERNEL
    if(writeres) var->xres = xres = E * 8;
    var->left_margin = D * 8;
    var->right_margin = F * 8;
    var->hsync_len = C * 8;
-#endif
 
    /* Vertical */
    sr_data = crdata[13];
@@ -4192,30 +3633,10 @@
 
    D = B - F - C;
 
-#ifdef SIS_XORG_XF86
-   current->VDisplay   = VDE + 1;
-   current->VSyncStart = VRS + 1;
-   current->VSyncEnd   = ((VRS & ~0x1f) | VRE) + 1;
-   if(VRE <= (VRS & 0x1f)) current->VSyncEnd += 32;
-   current->VTotal     = E + D + C + F;
-#if 0
-   current->VDisplay   = E;
-   current->VSyncStart = E + D;
-   current->VSyncEnd   = E + D + C;
-   current->VTotal     = E + D + C + F;
-#endif
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO,
-	"V: A %d B %d C %d D %d E %d F %d  VT %d VDE %d VRS %d VBS %d VBE %d VRE %d\n",
-	A, B, C, D, E, F, VT, VDE, VRS, VBS, VBE, VRE);
-#endif
-#endif
-#ifdef SIS_LINUX_KERNEL
    if(writeres) var->yres = yres = E;
    var->upper_margin = D;
    var->lower_margin = F;
    var->vsync_len = C;
-#endif
 
    if((xres == 320) && ((yres == 200) || (yres == 240))) {
 	/* Terrible hack, but correct CRTC data for
@@ -4224,17 +3645,9 @@
 	 * a negative D. The CRT controller does not
 	 * seem to like correcting HRE to 50)
 	 */
-#ifdef SIS_XORG_XF86
-      current->HDisplay   = 320;
-      current->HSyncStart = 328;
-      current->HSyncEnd   = 376;
-      current->HTotal     = 400;
-#endif
-#ifdef SIS_LINUX_KERNEL
       var->left_margin = (400 - 376);
       var->right_margin = (328 - 320);
       var->hsync_len = (376 - 328);
-#endif
 
    }
 
diff --git a/drivers/video/sis/init.h b/drivers/video/sis/init.h
index b96005c..ee8ed3c 100644
--- a/drivers/video/sis/init.h
+++ b/drivers/video/sis/init.h
@@ -53,21 +53,8 @@
 #ifndef _INIT_H_
 #define _INIT_H_
 
-#include "osdef.h"
 #include "initdef.h"
 
-#ifdef SIS_XORG_XF86
-#include "sis.h"
-#define SIS_NEED_inSISREG
-#define SIS_NEED_inSISREGW
-#define SIS_NEED_inSISREGL
-#define SIS_NEED_outSISREG
-#define SIS_NEED_outSISREGW
-#define SIS_NEED_outSISREGL
-#include "sis_regs.h"
-#endif
-
-#ifdef SIS_LINUX_KERNEL
 #include "vgatypes.h"
 #include "vstruct.h"
 #ifdef SIS_CP
@@ -78,7 +65,6 @@
 #include <linux/fb.h>
 #include "sis.h"
 #include <video/sisfb.h>
-#endif
 
 /* Mode numbers */
 static const unsigned short ModeIndex_320x200[]      = {0x59, 0x41, 0x00, 0x4f};
@@ -286,7 +272,7 @@
 	{ 1280, 854, 8,16}    /* 0x22 */
 };
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static const struct SiS_StandTable_S SiS_StandTable[]=
 {
 /* 0x00: MD_0_200 */
@@ -1521,10 +1507,6 @@
 };
 
 bool		SiSInitPtr(struct SiS_Private *SiS_Pr);
-#ifdef SIS_XORG_XF86
-unsigned short	SiS_GetModeID(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDisplay,
-				int Depth, bool FSTN, int LCDwith, int LCDheight);
-#endif
 unsigned short	SiS_GetModeID_LCD(int VGAEngine, unsigned int VBFlags, int HDisplay,
 				int VDisplay, int Depth, bool FSTN,
 				unsigned short CustomT, int LCDwith, int LCDheight,
@@ -1550,17 +1532,11 @@
 void		SiS_DisplayOn(struct SiS_Private *SiS_Pr);
 void		SiS_DisplayOff(struct SiS_Private *SiS_Pr);
 void		SiSRegInit(struct SiS_Private *SiS_Pr, SISIOADDRESS BaseAddr);
-#ifndef SIS_LINUX_KERNEL
-void		SiSSetLVDSetc(struct SiS_Private *SiS_Pr);
-#endif
 void		SiS_SetEnableDstn(struct SiS_Private *SiS_Pr, int enable);
 void		SiS_SetEnableFstn(struct SiS_Private *SiS_Pr, int enable);
 unsigned short	SiS_GetModeFlag(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 				unsigned short ModeIdIndex);
 bool		SiSDetermineROMLayout661(struct SiS_Private *SiS_Pr);
-#ifndef SIS_LINUX_KERNEL
-void		SiS_GetVBType(struct SiS_Private *SiS_Pr);
-#endif
 
 bool		SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo,
 				unsigned short *ModeIdIndex);
@@ -1572,37 +1548,19 @@
 				unsigned short ModeIdIndex);
 unsigned short	SiS_GetOffset(struct SiS_Private *SiS_Pr,unsigned short ModeNo,
 				unsigned short ModeIdIndex, unsigned short RRTI);
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 void		SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *idx1,
 				unsigned short *idx2);
 unsigned short	SiS_GetFIFOThresholdB300(unsigned short idx1, unsigned short idx2);
 unsigned short	SiS_GetLatencyFactor630(struct SiS_Private *SiS_Pr, unsigned short index);
 #endif
 void		SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex);
-#ifdef SIS_XORG_XF86
-bool		SiSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, unsigned short ModeNo,
-				bool dosetpitch);
-bool		SiSBIOSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-				DisplayModePtr mode, bool IsCustom);
-bool		SiSBIOSSetModeCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-				DisplayModePtr mode, bool IsCustom);
-bool		SiSBIOSSetModeCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-				DisplayModePtr mode, bool IsCustom);
-#endif
-#ifdef SIS_LINUX_KERNEL
 bool		SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
-#endif
 void		SiS_CalcCRRegisters(struct SiS_Private *SiS_Pr, int depth);
 void		SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 				unsigned short ModeIdIndex);
-#ifdef SIS_XORG_XF86
-void		SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres,
-				int yres, DisplayModePtr current);
-#endif
-#ifdef SIS_LINUX_KERNEL
 void		SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres,
 				int yres, struct fb_var_screeninfo *var, bool writeres);
-#endif
 
 /* From init301.c: */
 extern void		SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
@@ -1626,29 +1584,16 @@
 extern bool		SiS_IsVAMode(struct SiS_Private *);
 extern bool		SiS_IsDualEdge(struct SiS_Private *);
 
-#ifdef SIS_XORG_XF86
-/* From other modules: */
-extern unsigned short	SiS_CheckBuildCustomMode(ScrnInfoPtr pScrn, DisplayModePtr mode,
-				unsigned int VBFlags);
-extern unsigned char	SiS_GetSetBIOSScratch(ScrnInfoPtr pScrn, unsigned short offset,
-				unsigned char value);
-extern unsigned char	SiS_GetSetModeID(ScrnInfoPtr pScrn, unsigned char id);
-extern unsigned short 	SiS_GetModeNumber(ScrnInfoPtr pScrn, DisplayModePtr mode,
-				unsigned int VBFlags);
-#endif
-
-#ifdef SIS_LINUX_KERNEL
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 extern unsigned int	sisfb_read_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg);
 extern void		sisfb_write_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg,
 				unsigned int val);
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 extern void		sisfb_write_nbridge_pci_byte(struct SiS_Private *SiS_Pr, int reg,
 				unsigned char val);
 extern unsigned int	sisfb_read_mio_pci_word(struct SiS_Private *SiS_Pr, int reg);
 #endif
-#endif
 
 #endif
 
diff --git a/drivers/video/sis/init301.c b/drivers/video/sis/init301.c
index da33d80..9fa66fd 100644
--- a/drivers/video/sis/init301.c
+++ b/drivers/video/sis/init301.c
@@ -75,11 +75,11 @@
 
 #include "init301.h"
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 #include "oem300.h"
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 #include "oem310.h"
 #endif
 
@@ -87,9 +87,7 @@
 #define SiS_I2CDELAYSHORT  150
 
 static unsigned short	SiS_GetBIOSLCDResInfo(struct SiS_Private *SiS_Pr);
-#ifdef SIS_LINUX_KERNEL
 static void		SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val);
-#endif
 
 /*********************************************/
 /*         HELPER: Lock/Unlock CRT2          */
@@ -106,9 +104,7 @@
       SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x24,0x01);
 }
 
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiS_LockCRT2(struct SiS_Private *SiS_Pr)
 {
@@ -138,7 +134,7 @@
 /*    HELPER: Get Pointer to LCD structure   */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static unsigned char *
 GetLCDStructPtr661(struct SiS_Private *SiS_Pr)
 {
@@ -404,7 +400,7 @@
 /*    HELPER: GET SOME DATA FROM BIOS ROM    */
 /*********************************************/
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static bool
 SiS_CR36BIOSWord23b(struct SiS_Private *SiS_Pr)
 {
@@ -449,7 +445,7 @@
       SiS_GetReg(SiS_Pr->SiS_P3c4, 0x05);
 }
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static void
 SiS_GenericDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 {
@@ -457,7 +453,7 @@
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_LongDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 {
@@ -467,7 +463,7 @@
 }
 #endif
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static void
 SiS_ShortDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 {
@@ -480,14 +476,14 @@
 static void
 SiS_PanelDelay(struct SiS_Private *SiS_Pr, unsigned short DelayTime)
 {
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
    unsigned char  *ROMAddr = SiS_Pr->VirtualRomBase;
    unsigned short PanelID, DelayIndex, Delay=0;
 #endif
 
    if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 
       PanelID = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36);
       if(SiS_Pr->SiS_VBType & VB_SISVB) {
@@ -513,11 +509,11 @@
       }
       SiS_ShortDelay(SiS_Pr, Delay);
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
    } else {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 
       if((SiS_Pr->ChipType >= SIS_661)    ||
 	 (SiS_Pr->ChipType <= SIS_315PRO) ||
@@ -579,12 +575,12 @@
 
       }
 
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
 
    }
 }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_PanelDelayLoop(struct SiS_Private *SiS_Pr, unsigned short DelayTime, unsigned short DelayLoop)
 {
@@ -613,7 +609,7 @@
    while((!(SiS_GetRegByte(SiS_Pr->SiS_P3da) & 0x08)) && --watchdog);
 }
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static void
 SiS_WaitRetrace2(struct SiS_Private *SiS_Pr, unsigned short reg)
 {
@@ -630,7 +626,7 @@
 SiS_WaitVBRetrace(struct SiS_Private *SiS_Pr)
 {
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
 	 if(!(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x20)) return;
       }
@@ -641,7 +637,7 @@
       }
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       if(!(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x40)) {
 	 SiS_WaitRetrace1(SiS_Pr);
       } else {
@@ -686,7 +682,7 @@
 /*               HELPER: MISC                */
 /*********************************************/
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static bool
 SiS_Is301B(struct SiS_Private *SiS_Pr)
 {
@@ -708,7 +704,7 @@
 bool
 SiS_IsDualEdge(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       if((SiS_Pr->ChipType != SIS_650) || (SiS_GetReg(SiS_Pr->SiS_P3d4,0x5f) & 0xf0)) {
 	 if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x38) & EnableDualEdge) return true;
@@ -721,7 +717,7 @@
 bool
 SiS_IsVAMode(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned short flag;
 
    if(SiS_Pr->ChipType >= SIS_315H) {
@@ -732,7 +728,7 @@
    return false;
 }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsVAorLCD(struct SiS_Private *SiS_Pr)
 {
@@ -745,7 +741,7 @@
 static bool
 SiS_IsDualLink(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       if((SiS_CRT2IsLCD(SiS_Pr)) ||
          (SiS_IsVAMode(SiS_Pr))) {
@@ -756,7 +752,7 @@
    return false;
 }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_TVEnabled(struct SiS_Private *SiS_Pr)
 {
@@ -768,7 +764,7 @@
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_LCDAEnabled(struct SiS_Private *SiS_Pr)
 {
@@ -777,7 +773,7 @@
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_WeHaveBacklightCtrl(struct SiS_Private *SiS_Pr)
 {
@@ -788,7 +784,7 @@
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsNotM650orLater(struct SiS_Private *SiS_Pr)
 {
@@ -804,7 +800,7 @@
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsYPbPr(struct SiS_Private *SiS_Pr)
 {
@@ -816,7 +812,7 @@
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsChScart(struct SiS_Private *SiS_Pr)
 {
@@ -828,7 +824,7 @@
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsTVOrYPbPrOrScart(struct SiS_Private *SiS_Pr)
 {
@@ -848,7 +844,7 @@
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsLCDOrLCDA(struct SiS_Private *SiS_Pr)
 {
@@ -914,7 +910,7 @@
 /*********************************************/
 
 /* Setup general purpose IO for Chrontel communication */
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 void
 SiS_SetChrontelGPIO(struct SiS_Private *SiS_Pr, unsigned short myvbinfo)
 {
@@ -923,11 +919,7 @@
 
    if(!(SiS_Pr->SiS_ChSW)) return;
 
-#ifdef SIS_LINUX_KERNEL
    acpibase = sisfb_read_lpc_pci_dword(SiS_Pr, 0x74);
-#else
-   acpibase = pciReadLong(0x00000800, 0x74);
-#endif
    acpibase &= 0xFFFF;
    if(!acpibase) return;
    temp = SiS_GetRegShort((acpibase + 0x3c));	/* ACPI register 0x3c: GP Event 1 I/O mode select */
@@ -969,7 +961,7 @@
 	tempax &= (DriverMode | LoadDACFlag | SetNotSimuMode | SetPALTV);
 	tempbx |= tempax;
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	if(SiS_Pr->ChipType >= SIS_315H) {
 	   if(SiS_Pr->SiS_VBType & VB_SISLCDA) {
 	      if(ModeNo == 0x03) {
@@ -1019,7 +1011,7 @@
 	   }
 	}
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
         if(!(SiS_Pr->SiS_VBType & VB_SISVGA2)) {
 	   tempbx &= ~(SetCRT2ToRAMDAC);
@@ -1154,24 +1146,16 @@
 
    SiS_Pr->SiS_VBInfo = tempbx;
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    if(SiS_Pr->ChipType == SIS_630) {
       SiS_SetChrontelGPIO(SiS_Pr, SiS_Pr->SiS_VBInfo);
    }
 #endif
 
-#ifdef SIS_LINUX_KERNEL
 #if 0
    printk(KERN_DEBUG "sisfb: (init301: VBInfo= 0x%04x, SetFlag=0x%04x)\n",
       SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag);
 #endif
-#endif
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_PROBED, "(init301: VBInfo=0x%04x, SetFlag=0x%04x)\n",
-      SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag);
-#endif
-#endif
 }
 
 /*********************************************/
@@ -1415,12 +1399,6 @@
    }
 
    SiS_Pr->SiS_VBInfo &= ~SetPALTV;
-
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO, "(init301: TVMode %x, VBInfo %x)\n", SiS_Pr->SiS_TVMode, SiS_Pr->SiS_VBInfo);
-#endif
-#endif
 }
 
 /*********************************************/
@@ -1443,22 +1421,10 @@
 static void
 SiS_GetLCDInfoBIOS(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned char  *ROMAddr;
    unsigned short temp;
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO, "Paneldata driver: [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n",
-	SiS_Pr->PanelHT, SiS_Pr->PanelVT,
-	SiS_Pr->PanelHRS, SiS_Pr->PanelHRE,
-	SiS_Pr->PanelVRS, SiS_Pr->PanelVRE,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B);
-#endif
-#endif
-
    if((ROMAddr = GetLCDStructPtr661(SiS_Pr))) {
       if((temp = SISGETROMW(6)) != SiS_Pr->PanelHT) {
 	 SiS_Pr->SiS_NeedRomModeData = true;
@@ -1480,18 +1446,6 @@
       SiS_Pr->SiS_VCLKData[VCLK_CUSTOM_315].SR2C =
 	 SiS_Pr->SiS_VBVCLKData[VCLK_CUSTOM_315].Part4_B = ROMAddr[20];
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-      xf86DrvMsg(0, X_INFO, "Paneldata BIOS:  [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n",
-	SiS_Pr->PanelHT, SiS_Pr->PanelVT,
-	SiS_Pr->PanelHRS, SiS_Pr->PanelHRE,
-	SiS_Pr->PanelVRS, SiS_Pr->PanelVRE,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B);
-#endif
-#endif
-
    }
 #endif
 }
@@ -1517,13 +1471,13 @@
 {
   unsigned short temp,modeflag,resinfo=0,modexres=0,modeyres=0;
   bool panelcanscale = false;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
   static const unsigned char SiS300SeriesLCDRes[] =
           { 0,  1,  2,  3,  7,  4,  5,  8,
 	    0,  0, 10,  0,  0,  0,  0, 15 };
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned char   *myptr = NULL;
 #endif
 
@@ -1562,7 +1516,7 @@
      SiS_Pr->SiS_LCDTypeInfo = (temp & 0x0F) - 1;
   }
   temp &= 0x0f;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   if(SiS_Pr->ChipType < SIS_315H) {
      /* Very old BIOSes only know 7 sizes (NetVista 2179, 1.01g) */
      if(SiS_Pr->SiS_VBType & VB_SIS301) {
@@ -1574,7 +1528,7 @@
 #endif
 
   /* Translate to our internal types */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_Pr->ChipType == SIS_550) {
      if     (temp == Panel310_1152x768)  temp = Panel_320x240_2; /* Verified working */
      else if(temp == Panel310_320x240_2) temp = Panel_320x240_2;
@@ -1597,7 +1551,7 @@
 
   SiS_Pr->SiS_LCDResInfo = temp;
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
      if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) {
 	SiS_Pr->SiS_LCDResInfo = Panel_Barco1366;
@@ -1639,7 +1593,7 @@
   else if(SiS_Pr->UsePanelScaler == 1) SiS_Pr->SiS_LCDInfo |= DontExpandLCD;
 
   /* Dual link, Pass 1:1 BIOS default, etc. */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_Pr->ChipType >= SIS_661) {
      if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
 	if(temp & 0x08) SiS_Pr->SiS_LCDInfo |= LCDPass11;
@@ -2076,7 +2030,7 @@
      }
   }
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
      if(SiS_Pr->SiS_CustomT == CUT_PANEL848 || SiS_Pr->SiS_CustomT == CUT_PANEL856) {
 	SiS_Pr->SiS_LCDInfo = 0x80 | 0x40 | 0x20;   /* neg h/v sync, RGB24(D0 = 0) */
@@ -2186,17 +2140,10 @@
      SiS_Pr->SiS_SetFlag |= LCDVESATiming;
   }
 
-#ifdef SIS_LINUX_KERNEL
 #if 0
   printk(KERN_DEBUG "sisfb: (LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x)\n",
 	SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo);
 #endif
-#endif
-#ifdef SIS_XORG_XF86
-  xf86DrvMsgVerb(0, X_PROBED, 4,
-	"(init301: LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x SetFlag=0x%04x)\n",
-	SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo, SiS_Pr->SiS_SetFlag);
-#endif
 }
 
 /*********************************************/
@@ -2359,7 +2306,7 @@
 	      VCLKIndex = SiS_Pr->PanelVCLKIdx315;
 	   }
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	   /* Special Timing: Barco iQ Pro R series */
 	   if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) VCLKIndex = 0x44;
 
@@ -2410,12 +2357,6 @@
 
   }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-  xf86DrvMsg(0, X_INFO, "VCLKIndex %d (0x%x)\n", VCLKIndex, VCLKIndex);
-#endif
-#endif
-
   return VCLKIndex;
 }
 
@@ -2428,10 +2369,10 @@
 {
   unsigned short i, j, modeflag, tempah=0;
   short tempcl;
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
   unsigned short tempbl;
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned char  *ROMAddr = SiS_Pr->VirtualRomBase;
   unsigned short tempah2, tempbl2;
 #endif
@@ -2454,7 +2395,7 @@
 
      if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300    /* ---- 300 series ---- */
+#ifdef CONFIG_FB_SIS_300    /* ---- 300 series ---- */
 
 	/* For 301BDH: (with LCD via LVDS) */
 	if(SiS_Pr->SiS_VBType & VB_NoLCD) {
@@ -2477,11 +2418,11 @@
 
 	if(SiS_Pr->SiS_VBInfo & SetInSlaveMode)  tempah ^= 0xA0;
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
      } else {
 
-#ifdef SIS315H    /* ------- 315/330 series ------ */
+#ifdef CONFIG_FB_SIS_315    /* ------- 315/330 series ------ */
 
 	if(ModeNo > 0x13) {
 	   tempcl -= ModeVGA;
@@ -2494,7 +2435,7 @@
 
 	if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) tempah ^= 0x50;
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
      }
 
@@ -2503,7 +2444,7 @@
      if(SiS_Pr->ChipType < SIS_315H) {
 	SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,tempah);
      } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
 	   SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x00,0xa0,tempah);
 	} else if(SiS_Pr->SiS_VBType & VB_SISVB) {
@@ -2584,7 +2525,7 @@
 
 	if(SiS_Pr->ChipType >= SIS_315H) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	   /* LVDS can only be slave in 8bpp modes */
 	   tempah = 0x80;
 	   if((modeflag & CRT2Mode) && (SiS_Pr->SiS_ModeType > ModeVGA)) {
@@ -2604,7 +2545,7 @@
 
 	} else {
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	   tempah = 0;
 	   if( (!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) && (SiS_Pr->SiS_ModeType > ModeVGA) ) {
 	      tempah |= 0x02;
@@ -2626,7 +2567,7 @@
 
      if(SiS_Pr->ChipType >= SIS_315H) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	/* unsigned char bridgerev = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x01); */
 
 	/* The following is nearly unpreditable and varies from machine
@@ -2718,11 +2659,11 @@
 	   SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x23,tempbl,tempah);
 	}
 
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
 
      } else if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x21,0x3f);
 
 	if((SiS_Pr->SiS_VBInfo & DisableCRT2Display) ||
@@ -2745,7 +2686,7 @@
 
   } else {  /* LVDS */
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
      if(SiS_Pr->ChipType >= SIS_315H) {
 
 	if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) {
@@ -2931,7 +2872,7 @@
 	   }
 	}
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	if(SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) {
 	   if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) {
 	      if(!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) {
@@ -3036,7 +2977,7 @@
 	case Panel_1280x1024: tempbx = 24; break;
 	case Panel_1400x1050: tempbx = 26; break;
 	case Panel_1600x1200: tempbx = 28; break;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	case Panel_Barco1366: tempbx = 80; break;
 #endif
 	}
@@ -3053,7 +2994,7 @@
 
 	if(SiS_Pr->SiS_LCDInfo & LCDPass11) tempbx = 30;
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	if(SiS_Pr->SiS_CustomT == CUT_BARCO1024) {
 	   tempbx = 82;
 	   if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) tempbx++;
@@ -3189,7 +3130,7 @@
 
    if((SiS_Pr->SiS_VBType & VB_SISVB) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       SiS_CalcPanelLinkTiming(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
       SiS_CalcLCDACRT1Timing(SiS_Pr, ModeNo, ModeIdIndex);
 #endif
@@ -3214,7 +3155,7 @@
 	 case 16: LVDSData = SiS_Pr->SiS_LVDS800x600Data_1;    break;
 	 case 18: LVDSData = SiS_Pr->SiS_LVDS1024x600Data_1;   break;
 	 case 20: LVDSData = SiS_Pr->SiS_LVDS1024x768Data_1;   break;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	 case 80: LVDSData = SiS_Pr->SiS_LVDSBARCO1366Data_1;  break;
 	 case 81: LVDSData = SiS_Pr->SiS_LVDSBARCO1366Data_2;  break;
 	 case 82: LVDSData = SiS_Pr->SiS_LVDSBARCO1024Data_1;  break;
@@ -3248,7 +3189,7 @@
 	     (SiS_Pr->SiS_SetFlag & SetDOSMode) ) {
 	    SiS_Pr->SiS_HDE = SiS_Pr->PanelXRes;
             SiS_Pr->SiS_VDE = SiS_Pr->PanelYRes;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	    if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) {
 	       if(ResIndex < 0x08) {
 		  SiS_Pr->SiS_HDE = 1280;
@@ -3270,7 +3211,7 @@
   unsigned short resinfo, CRT2Index, ResIndex;
   const struct SiS_LCDData *LCDPtr = NULL;
   const struct SiS_TVData  *TVPtr  = NULL;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   short resinfo661;
 #endif
 
@@ -3283,7 +3224,7 @@
   } else {
      modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
      resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
      resinfo661 = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].ROMMODEIDX661;
      if( (SiS_Pr->SiS_VBInfo & SetCRT2ToLCD)   &&
 	 (SiS_Pr->SiS_SetFlag & LCDVESATiming) &&
@@ -3460,7 +3401,7 @@
 
 	} else if( (!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) && (romptr) && (ROMAddr) ) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	   SiS_Pr->SiS_RVBHCMAX  = ROMAddr[romptr];
 	   SiS_Pr->SiS_RVBHCFACT = ROMAddr[romptr+1];
 	   SiS_Pr->SiS_VGAHT     = ROMAddr[romptr+2] | ((ROMAddr[romptr+3] & 0x0f) << 8);
@@ -3520,19 +3461,13 @@
 	      case Panel_1680x1050     :
 	      case Panel_1680x1050 + 32: LCDPtr = SiS_Pr->SiS_LCD1680x1050Data;     break;
 	      case 100		       : LCDPtr = SiS_Pr->SiS_NoScaleData;	    break;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	      case 200                 : LCDPtr = SiS310_ExtCompaq1280x1024Data;    break;
 	      case 201                 : LCDPtr = SiS_Pr->SiS_St2LCD1280x1024Data;  break;
 #endif
 	      default                  : LCDPtr = SiS_Pr->SiS_ExtLCD1024x768Data;   break;
 	   }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-	   xf86DrvMsg(0, X_INFO, "GetCRT2Data: Index %d ResIndex %d\n", CRT2Index, ResIndex);
-#endif
-#endif
-
 	   SiS_Pr->SiS_RVBHCMAX  = (LCDPtr+ResIndex)->RVBHCMAX;
 	   SiS_Pr->SiS_RVBHCFACT = (LCDPtr+ResIndex)->RVBHCFACT;
 	   SiS_Pr->SiS_VGAHT     = (LCDPtr+ResIndex)->VGAHT;
@@ -3624,7 +3559,7 @@
 {
    const struct SiS_LVDSDes *PanelDesPtr = NULL;
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) {
 
       if(SiS_Pr->ChipType < SIS_315H) {
@@ -3696,7 +3631,7 @@
 
   if((SiS_Pr->SiS_VBType & VB_SIS30xBLV) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
      if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
 	/* non-pass 1:1 only, see above */
 	if(SiS_Pr->SiS_VGAHDE != SiS_Pr->PanelXRes) {
@@ -3771,7 +3706,7 @@
      } else {
 
         if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	   switch(SiS_Pr->SiS_LCDResInfo) {
 	   case Panel_800x600:
 	      if(SiS_Pr->SiS_VGAVDE == SiS_Pr->PanelYRes) {
@@ -3816,7 +3751,7 @@
 	   }
 #endif
         } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	   switch(SiS_Pr->SiS_LCDResInfo) {
 	   case Panel_1024x768:
 	   case Panel_1280x1024:
@@ -3844,7 +3779,7 @@
 	         if(SiS_Pr->ChipType < SIS_315H) {
 	            if(!(modeflag & HalfDCLK)) SiS_Pr->SiS_LCDHDES = 320;
 	         } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 		    if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768)  SiS_Pr->SiS_LCDHDES = 480;
 		    if(SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) SiS_Pr->SiS_LCDHDES = 804;
 		    if(SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) SiS_Pr->SiS_LCDHDES = 704;
@@ -3866,7 +3801,7 @@
 /*           DISABLE VIDEO BRIDGE            */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static int
 SiS_HandlePWD(struct SiS_Private *SiS_Pr)
 {
@@ -3891,11 +3826,6 @@
 	 ret = 1;
       }
       SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x27,0x7f,temp);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-      xf86DrvMsg(0, 0, "Setting PWD %x\n", temp);
-#endif
-#endif
    }
 #endif
    return ret;
@@ -3909,7 +3839,7 @@
 void
 SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short tempah, pushax=0, modenum;
 #endif
   unsigned short temp=0;
@@ -3920,7 +3850,7 @@
 
 	if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300	   /* 300 series */
+#ifdef CONFIG_FB_SIS_300	   /* 300 series */
 
 	   if(!(SiS_CR36BIOSWord23b(SiS_Pr))) {
 	      if(SiS_Pr->SiS_VBType & VB_SISLVDS) {
@@ -3953,11 +3883,11 @@
 	      }
 	   }
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
         } else {
 
-#ifdef SIS315H	   /* 315 series */
+#ifdef CONFIG_FB_SIS_315	   /* 315 series */
 
 	   int didpwd = 0;
 	   bool custom1 = (SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) ||
@@ -4081,14 +4011,14 @@
 
 	   }
 
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
 
 	}
 
      } else {     /* ============ For 301 ================ */
 
         if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	   if(!(SiS_CR36BIOSWord23b(SiS_Pr))) {
 	      SiS_SetRegSR11ANDOR(SiS_Pr,0xF7,0x08);
 	      SiS_PanelDelay(SiS_Pr, 3);
@@ -4111,7 +4041,7 @@
 	    SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x20);
 	    SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,temp);
 	} else {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	    SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x1E,0xDF);            /* disable CRT2 */
 	    if( (!(SiS_CRT2IsLCD(SiS_Pr))) ||
 		(!(SiS_CR36BIOSWord23d(SiS_Pr))) ) {
@@ -4127,7 +4057,7 @@
 
     if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300	/* 300 series */
+#ifdef CONFIG_FB_SIS_300	/* 300 series */
 
 	if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) {
 	   SiS_SetCH700x(SiS_Pr,0x0E,0x09);
@@ -4171,11 +4101,11 @@
 	   SiS_SetRegSR11ANDOR(SiS_Pr,0xFB,0x04);
 	}
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
     } else {
 
-#ifdef SIS315H	/* 315 series */
+#ifdef CONFIG_FB_SIS_315	/* 315 series */
 
 	if(!(SiS_IsNotM650orLater(SiS_Pr))) {
 	   /*if(SiS_Pr->ChipType < SIS_340) { */ /* XGI needs this */
@@ -4288,7 +4218,7 @@
 	   }
         }
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
     }  /* 315 series */
 
@@ -4304,14 +4234,12 @@
  * from outside the context of a mode switch!
  * MUST call getVBType before calling this
  */
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 {
   unsigned short temp=0, tempah;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short temp1, pushax=0;
   bool delaylong = false;
 #endif
@@ -4322,7 +4250,7 @@
 
       if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300     /* 300 series */
+#ifdef CONFIG_FB_SIS_300     /* 300 series */
 
 	 if(SiS_CRT2IsLCD(SiS_Pr)) {
 	    if(SiS_Pr->SiS_VBType & VB_SISLVDS) {
@@ -4385,11 +4313,11 @@
 	 }
 
 
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
       } else {
 
-#ifdef SIS315H    /* 315 series */
+#ifdef CONFIG_FB_SIS_315    /* 315 series */
 
 #ifdef SET_EMI
 	 unsigned char   r30=0, r31=0, r32=0, r33=0, cr36=0;
@@ -4688,7 +4616,7 @@
 	    SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x00,0x7f);
 	 }
 
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
 
       }
 
@@ -4739,7 +4667,7 @@
 
     if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300    /* 300 series */
+#ifdef CONFIG_FB_SIS_300    /* 300 series */
 
        if(SiS_CRT2IsLCD(SiS_Pr)) {
 	  if(SiS_Pr->ChipType == SIS_730) {
@@ -4783,11 +4711,11 @@
 	  }
        }
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
     } else {
 
-#ifdef SIS315H    /* 315 series */
+#ifdef CONFIG_FB_SIS_315    /* 315 series */
 
        if(!(SiS_IsNotM650orLater(SiS_Pr))) {
 	  /*if(SiS_Pr->ChipType < SIS_340) {*/  /* XGI needs this */
@@ -4881,7 +4809,7 @@
 	  }
        }
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
     } /* 310 series */
 
@@ -4971,7 +4899,7 @@
 
       if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300  /* ---- 300 series --- */
+#ifdef CONFIG_FB_SIS_300  /* ---- 300 series --- */
 
 	 if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {			/* 630 - 301B(-DH) */
 
@@ -5000,11 +4928,11 @@
 
 	 }
 
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
       } else {
 
-#ifdef SIS315H  /* ------- 315 series ------ */
+#ifdef CONFIG_FB_SIS_315  /* ------- 315 series ------ */
 
 	 if(SiS_Pr->SiS_VBType & VB_SISLVDS) {	  		/* 315 - LVDS */
 
@@ -5076,13 +5004,13 @@
 	    }
 
          }
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
       }
    }
 }
 
 /* Set CRT2 FIFO on 300/540/630/730 */
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static void
 SiS_SetCRT2FIFO_300(struct SiS_Private *SiS_Pr,unsigned short ModeNo)
 {
@@ -5154,13 +5082,8 @@
 
      } else {
 
-#ifdef SIS_LINUX_KERNEL
 	pci50 = sisfb_read_nbridge_pci_dword(SiS_Pr, 0x50);
 	pciA0 = sisfb_read_nbridge_pci_dword(SiS_Pr, 0xa0);
-#else
-	pci50 = pciReadLong(0x00000000, 0x50);
-	pciA0 = pciReadLong(0x00000000, 0xA0);
-#endif
 
         if(SiS_Pr->ChipType == SIS_730) {
 
@@ -5262,7 +5185,7 @@
 #endif
 
 /* Set CRT2 FIFO on 315/330 series */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_SetCRT2FIFO_310(struct SiS_Private *SiS_Pr)
 {
@@ -5420,27 +5343,6 @@
 
   temp = SiS_GetRegByte((SiS_Pr->SiS_P3ca+0x02));
   SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,temp);			/* ? */
-
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO, "%d %d %d %d  %d %d %d %d  (%d %d %d %d)\n",
-	SiS_Pr->CHDisplay, SiS_Pr->CHSyncStart, SiS_Pr->CHSyncEnd, SiS_Pr->CHTotal,
-	SiS_Pr->CVDisplay, SiS_Pr->CVSyncStart, SiS_Pr->CVSyncEnd, SiS_Pr->CVTotal,
-	SiS_Pr->CHBlankStart, SiS_Pr->CHBlankEnd, SiS_Pr->CVBlankStart, SiS_Pr->CVBlankEnd);
-
-   xf86DrvMsg(0, X_INFO, " {{0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
-	SiS_Pr->CCRT1CRTC[0], SiS_Pr->CCRT1CRTC[1],
-	SiS_Pr->CCRT1CRTC[2], SiS_Pr->CCRT1CRTC[3],
-	SiS_Pr->CCRT1CRTC[4], SiS_Pr->CCRT1CRTC[5],
-	SiS_Pr->CCRT1CRTC[6], SiS_Pr->CCRT1CRTC[7]);
-   xf86DrvMsg(0, X_INFO, "   0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
-	SiS_Pr->CCRT1CRTC[8], SiS_Pr->CCRT1CRTC[9],
-	SiS_Pr->CCRT1CRTC[10], SiS_Pr->CCRT1CRTC[11],
-	SiS_Pr->CCRT1CRTC[12], SiS_Pr->CCRT1CRTC[13],
-	SiS_Pr->CCRT1CRTC[14], SiS_Pr->CCRT1CRTC[15]);
-   xf86DrvMsg(0, X_INFO, "   0x%02x}},\n", SiS_Pr->CCRT1CRTC[16]);
-#endif
-#endif
 }
 
 /* Setup panel link
@@ -5455,17 +5357,17 @@
   unsigned short push2, tempax, tempbx, tempcx, temp;
   unsigned int   tempeax = 0, tempebx, tempecx, tempvcfact = 0;
   bool islvds = false, issis  = false, chkdclkfirst = false;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   unsigned short crt2crtc = 0;
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short pushcx;
 #endif
 
   if(ModeNo <= 0x13) {
      modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag;
      resinfo = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ResInfo;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
      crt2crtc = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC;
 #endif
   } else if(SiS_Pr->UseCustomMode) {
@@ -5473,7 +5375,7 @@
   } else {
      modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
      resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
      crt2crtc = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 #endif
   }
@@ -5494,7 +5396,7 @@
      }
   }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if((SiS_Pr->ChipType >= SIS_315H) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) {
      if(IS_SIS330) {
         SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2D,0x10);
@@ -5744,7 +5646,7 @@
 
   if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300      /* 300 series */
+#ifdef CONFIG_FB_SIS_300      /* 300 series */
      tempeax = SiS_Pr->SiS_VGAVDE << 6;
      temp = (tempeax % (unsigned int)SiS_Pr->SiS_VDE);
      tempeax = tempeax / (unsigned int)SiS_Pr->SiS_VDE;
@@ -5755,11 +5657,11 @@
      temp = (unsigned short)(tempeax & 0x00FF);
      SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1E,temp);      	/* BPLVCFACT */
      tempvcfact = temp;
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
   } else {
 
-#ifdef SIS315H  /* 315 series */
+#ifdef CONFIG_FB_SIS_315  /* 315 series */
      tempeax = SiS_Pr->SiS_VGAVDE << 18;
      tempebx = SiS_Pr->SiS_VDE;
      temp = (tempeax % tempebx);
@@ -5845,7 +5747,7 @@
   temp = (unsigned short)(tempecx & 0x00FF);
   SiS_SetReg(SiS_Pr->SiS_Part1Port,0x23,temp);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_Pr->ChipType >= SIS_315H) {
      if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
         if((islvds) || (SiS_Pr->SiS_VBInfo & VB_SISLVDS)) {
@@ -5863,7 +5765,7 @@
   }
 #endif
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   if(SiS_Pr->SiS_IF_DEF_TRUMPION) {
      unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
      unsigned char *trumpdata;
@@ -5899,7 +5801,7 @@
   }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_Pr->SiS_IF_DEF_FSTN || SiS_Pr->SiS_IF_DEF_DSTN) {
      SiS_SetReg(SiS_Pr->SiS_Part1Port,0x25,0x00);
      SiS_SetReg(SiS_Pr->SiS_Part1Port,0x26,0x00);
@@ -5999,7 +5901,7 @@
         SiS_SetReg(SiS_Pr->SiS_Part1Port,0x45,0x0a);
      }
   }
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 }
 
 /* Set Part 1 */
@@ -6007,12 +5909,12 @@
 SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex,
 		unsigned short RefreshRateTableIndex)
 {
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
   unsigned char   *ROMAddr = SiS_Pr->VirtualRomBase;
 #endif
   unsigned short  temp=0, tempax=0, tempbx=0, tempcx=0, bridgeadd=0;
   unsigned short  pushbx=0, CRT1Index=0, modeflag, resinfo=0;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short  tempbl=0;
 #endif
 
@@ -6038,11 +5940,11 @@
          (SiS_Pr->SiS_VBInfo & SetInSlaveMode)) ) {
 
      if(SiS_Pr->ChipType < SIS_315H ) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	SiS_SetCRT2FIFO_300(SiS_Pr, ModeNo);
 #endif
      } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	SiS_SetCRT2FIFO_310(SiS_Pr);
 #endif
      }
@@ -6051,7 +5953,7 @@
 
      if(SiS_Pr->ChipType < SIS_315H ) {
 
-#ifdef SIS300   /* ------------- 300 series --------------*/
+#ifdef CONFIG_FB_SIS_300   /* ------------- 300 series --------------*/
 
 	temp = (SiS_Pr->SiS_VGAHT - 1) & 0x0FF;   		  /* BTVGA2HT 0x08,0x09 */
 	SiS_SetReg(SiS_Pr->SiS_Part1Port,0x08,temp);              /* CRT2 Horizontal Total */
@@ -6070,11 +5972,11 @@
 
 	bridgeadd = 12;
 
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
      } else {
 
-#ifdef SIS315H  /* ------------------- 315/330 series --------------- */
+#ifdef CONFIG_FB_SIS_315  /* ------------------- 315/330 series --------------- */
 
 	tempcx = SiS_Pr->SiS_VGAHT;				  /* BTVGA2HT 0x08,0x09 */
 	if(modeflag & HalfDCLK) {
@@ -6125,7 +6027,7 @@
 	   }
         }
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
      }  /* 315/330 series */
 
@@ -6256,7 +6158,7 @@
 
      if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300  /* ---------- 300 series -------------- */
+#ifdef CONFIG_FB_SIS_300  /* ---------- 300 series -------------- */
 
 	if(SiS_Pr->SiS_VBType & VB_SISVB) {
 	   temp = 0x20;
@@ -6310,11 +6212,11 @@
 
 	SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,~0x3C,temp);   /* Panel Link Delay Compensation; (Software Command Reset; Power Saving) */
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
      } else {
 
-#ifdef SIS315H   /* --------------- 315/330 series ---------------*/
+#ifdef CONFIG_FB_SIS_315   /* --------------- 315/330 series ---------------*/
 
 	if(SiS_Pr->ChipType < SIS_661) {
 
@@ -6349,7 +6251,7 @@
 	if(modeflag & HalfDCLK)       tempax |= 0x40;
 	SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2C,0x3f,tempax);
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
      }
 
@@ -6381,7 +6283,7 @@
 /*         SET PART 2 REGISTER GROUP         */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static unsigned char *
 SiS_GetGroup2CLVXPtr(struct SiS_Private *SiS_Pr, int tabletype)
 {
@@ -6478,7 +6380,7 @@
 }
 #endif
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static void
 SiS_Group2LCDSpecial(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short crt2crtc)
 {
@@ -6690,7 +6592,7 @@
   unsigned int   longtemp, PhaseIndex;
   bool           newtvphase;
   const unsigned char *TimingPoint;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short resindex, CRT2Index;
   const struct SiS_Part2PortTbl *CRT2Part2Ptr = NULL;
 
@@ -7069,7 +6971,7 @@
   SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x17,0xFB);
   SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x18,0xDF);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_GetCRT2Part2Ptr(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex,
                           			&CRT2Index, &resindex)) {
       switch(CRT2Index) {
@@ -7130,12 +7032,6 @@
 
     /* Non-expanding: lcdvdes = tempcx = VT-1; lcdvdee = tempbx = VDE-1 */
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdvdes 0x%x lcdvdee 0x%x\n", tempcx, tempbx);
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x05,tempcx);	/* lcdvdes  */
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x06,tempbx);	/* lcdvdee  */
 
@@ -7184,12 +7080,6 @@
        tempbx = SiS_Pr->CVSyncStart;
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdvrs 0x%x\n", tempbx);
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x04,tempbx);	    /* lcdvrs */
 
     temp = (tempbx >> 4) & 0xF0;
@@ -7201,15 +7091,9 @@
        temp |= (SiS_Pr->CVSyncEnd & 0x0f);
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdvre[3:0] 0x%x\n", (temp & 0x0f));
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,temp);
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
     SiS_Group2LCDSpecial(SiS_Pr, ModeNo, crt2crtc);
 #endif
 
@@ -7245,12 +7129,6 @@
        tempax >>= 1;
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdhdee 0x%x\n", tempbx);
-#endif
-#endif
-
     tempbx += bridgeoffset;
 
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x23,tempbx);	    /* lcdhdee */
@@ -7276,12 +7154,6 @@
        tempbx += bridgeoffset;
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdhrs 0x%x\n", tempbx);
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x1C,tempbx);	    /* lcdhrs */
     SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x1D,0x0F,((tempbx >> 4) & 0xf0));
 
@@ -7300,20 +7172,14 @@
        tempbx += bridgeoffset;
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdhre 0x%x\n", tempbx);
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x21,tempbx);	    /* lcdhre */
 
     SiS_SetGroup2_Tail(SiS_Pr, ModeNo);
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
     SiS_Set300Part2Regs(SiS_Pr, ModeIdIndex, RefreshRateTableIndex, ModeNo);
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   } /* CRT2-LCD from table */
 #endif
 }
@@ -7382,7 +7248,7 @@
 /*         SET PART 4 REGISTER GROUP         */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 #if 0
 static void
 SiS_ShiftXPos(struct SiS_Private *SiS_Pr, int shift)
@@ -8011,7 +7877,7 @@
 
    if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) {
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 
       /* Chrontel 7005 - I assume that it does not come with a 315 series chip */
 
@@ -8124,7 +7990,7 @@
 
       /* Chrontel 7019 - assumed that it does not come with a 300 series chip */
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 
       unsigned short temp;
 
@@ -8175,7 +8041,7 @@
 
 }
 
-#ifdef SIS315H  /* ----------- 315 series only ---------- */
+#ifdef CONFIG_FB_SIS_315  /* ----------- 315 series only ---------- */
 
 void
 SiS_Chrontel701xBLOn(struct SiS_Private *SiS_Pr)
@@ -8657,7 +8523,7 @@
 bool
 SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    unsigned char  *ROMAddr  = SiS_Pr->VirtualRomBase;
 #endif
    unsigned short ModeIdIndex, RefreshRateTableIndex;
@@ -8703,16 +8569,6 @@
       SiS_GetLVDSDesData(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
    }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-  xf86DrvMsg(0, X_INFO, "(init301: LCDHDES 0x%03x LCDVDES 0x%03x)\n", SiS_Pr->SiS_LCDHDES, SiS_Pr->SiS_LCDVDES);
-  xf86DrvMsg(0, X_INFO, "(init301: HDE     0x%03x VDE     0x%03x)\n", SiS_Pr->SiS_HDE, SiS_Pr->SiS_VDE);
-  xf86DrvMsg(0, X_INFO, "(init301: VGAHDE  0x%03x VGAVDE  0x%03x)\n", SiS_Pr->SiS_VGAHDE, SiS_Pr->SiS_VGAVDE);
-  xf86DrvMsg(0, X_INFO, "(init301: HT      0x%03x VT      0x%03x)\n", SiS_Pr->SiS_HT, SiS_Pr->SiS_VT);
-  xf86DrvMsg(0, X_INFO, "(init301: VGAHT   0x%03x VGAVT   0x%03x)\n", SiS_Pr->SiS_VGAHT, SiS_Pr->SiS_VGAVT);
-#endif
-#endif
-
    if(SiS_Pr->SiS_SetFlag & LowModeTests) {
       SiS_SetGroup1(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
    }
@@ -8722,12 +8578,12 @@
       if(SiS_Pr->SiS_SetFlag & LowModeTests) {
 
 	 SiS_SetGroup2(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	 SiS_SetGroup2_C_ELV(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
 #endif
 	 SiS_SetGroup3(SiS_Pr, ModeNo, ModeIdIndex);
 	 SiS_SetGroup4(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	 SiS_SetGroup4_C_ELV(SiS_Pr, ModeNo, ModeIdIndex);
 #endif
 	 SiS_SetGroup5(SiS_Pr, ModeNo, ModeIdIndex);
@@ -8758,7 +8614,7 @@
 	 if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) {
 	    if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) {
 	       if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 		  SiS_SetCH701xForLCD(SiS_Pr);
 #endif
 	       }
@@ -8771,7 +8627,7 @@
 
    }
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    if(SiS_Pr->ChipType < SIS_315H) {
       if(SiS_Pr->SiS_SetFlag & LowModeTests) {
 	 if(SiS_Pr->SiS_UseOEM) {
@@ -8794,7 +8650,7 @@
    }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       if(SiS_Pr->SiS_SetFlag & LowModeTests) {
 	 if(SiS_Pr->ChipType < SIS_661) {
@@ -8873,7 +8729,7 @@
   }
 }
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static unsigned char *
 SiS_SetTrumpBlockLoop(struct SiS_Private *SiS_Pr, unsigned char *dataptr)
 {
@@ -8923,11 +8779,6 @@
      dataptr = SiS_SetTrumpBlockLoop(SiS_Pr, dataptr);
      if(!dataptr) return false;
   }
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-  xf86DrvMsg(0, X_INFO, "Trumpion block success\n");
-#endif
-#endif
   return true;
 }
 #endif
@@ -9002,9 +8853,7 @@
   SiS_SetChReg(SiS_Pr, reg, val, 0);
 }
 
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val)
 {
@@ -9091,9 +8940,7 @@
 
 /* Read from Chrontel 70xx */
 /* Parameter is [Register no (S7-S0)] */
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 unsigned short
 SiS_GetCH70xx(struct SiS_Private *SiS_Pr, unsigned short tempbx)
 {
@@ -9114,9 +8961,7 @@
 }
 
 /* Our own DDC functions */
-#ifndef SIS_XORG_XF86
 static
-#endif
 unsigned short
 SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags, int VGAEngine,
                 unsigned short adaptnum, unsigned short DDCdatatype, bool checkcr32,
@@ -9224,12 +9069,6 @@
 
     SiS_SetupDDCN(SiS_Pr);
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "DDC Port %x Index %x Shift %d\n",
-    		SiS_Pr->SiS_DDC_Port, SiS_Pr->SiS_DDC_Index, temp);
-#endif
-#endif
     return 0;
 }
 
@@ -9292,11 +9131,6 @@
     SiS_SetSwitchDDC2(SiS_Pr);
     if(SiS_PrepareDDC(SiS_Pr)) {
          SiS_SetStop(SiS_Pr);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-         xf86DrvMsg(0, X_INFO, "Probe: Prepare failed\n");
-#endif
-#endif
          return 0xFFFF;
     }
     mask = 0xf0;
@@ -9310,11 +9144,6 @@
        } else {
            failed = true;
 	   ret = 0xFFFF;
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-           xf86DrvMsg(0, X_INFO, "Probe: Read 1 failed\n");
-#endif
-#endif
        }
     }
     if(!failed) {
@@ -9324,11 +9153,6 @@
        if(temp == value) ret = 0;
        else {
           ret = 0xFFFF;
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-          xf86DrvMsg(0, X_INFO, "Probe: Read 2 failed\n");
-#endif
-#endif
           if(SiS_Pr->SiS_DDC_DeviceAddr == 0xa0) {
              if(temp == 0x30) ret = 0;
           }
@@ -9338,9 +9162,7 @@
     return ret;
 }
 
-#ifndef SIS_XORG_XF86
 static
-#endif
 unsigned short
 SiS_ProbeDDC(struct SiS_Private *SiS_Pr)
 {
@@ -9357,9 +9179,7 @@
    return flag;
 }
 
-#ifndef SIS_XORG_XF86
 static
-#endif
 unsigned short
 SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype, unsigned char *buffer)
 {
@@ -9606,11 +9426,6 @@
     temp = SiS_GetReg(SiS_Pr->SiS_DDC_Port,SiS_Pr->SiS_DDC_Index);
   } while((!(temp & SiS_Pr->SiS_DDC_Clk)) && --watchdog);
   if (!watchdog) {
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-        xf86DrvMsg(0, X_INFO, "SetClkHigh failed\n");
-#endif
-#endif
   	return 0xFFFF;
   }
   SiS_DDC2Delay(SiS_Pr,SiS_I2CDELAYSHORT);
@@ -9641,7 +9456,7 @@
 
 /* =============== SiS 315/330 O.E.M. ================= */
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 
 static unsigned short
 GetRAMDACromptr(struct SiS_Private *SiS_Pr)
@@ -10829,7 +10644,7 @@
 
 /*  =================  SiS 300 O.E.M. ================== */
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 
 static void
 SetOEMLCDData2(struct SiS_Private *SiS_Pr, unsigned short ModeNo,unsigned short ModeIdIndex,
diff --git a/drivers/video/sis/init301.h b/drivers/video/sis/init301.h
index 51d9922..e1fd31d 100644
--- a/drivers/video/sis/init301.h
+++ b/drivers/video/sis/init301.h
@@ -53,15 +53,8 @@
 #ifndef  _INIT301_H_
 #define  _INIT301_H_
 
-#include "osdef.h"
 #include "initdef.h"
 
-#ifdef SIS_XORG_XF86
-#include "sis.h"
-#include "sis_regs.h"
-#endif
-
-#ifdef SIS_LINUX_KERNEL
 #include "vgatypes.h"
 #include "vstruct.h"
 #ifdef SIS_CP
@@ -72,7 +65,6 @@
 #include <linux/fb.h>
 #include "sis.h"
 #include <video/sisfb.h>
-#endif
 
 static const unsigned char SiS_YPbPrTable[3][64] = {
   {
@@ -237,7 +229,7 @@
     0xFF,0xFF,
 };
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 /* 661 et al LCD data structure (2.03.00) */
 static const unsigned char SiS_LCDStruct661[] = {
     /* 1024x768 */
@@ -279,7 +271,7 @@
 };
 #endif
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static unsigned char SiS300_TrumpionData[14][80] = {
   { 0x02,0x0A,0x0A,0x01,0x04,0x01,0x00,0x03,0x0D,0x00,0x0D,0x10,0x7F,0x00,0x80,0x02,
     0x20,0x03,0x0B,0x00,0x90,0x01,0xC1,0x01,0x60,0x0C,0x30,0x10,0x00,0x00,0x04,0x23,
@@ -356,9 +348,6 @@
 #endif
 
 void		SiS_UnLockCRT2(struct SiS_Private *SiS_Pr);
-#ifndef SIS_LINUX_KERNEL
-void		SiS_LockCRT2(struct SiS_Private *SiS_Pr);
-#endif
 void		SiS_EnableCRT2(struct SiS_Private *SiS_Pr);
 unsigned short	SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex);
 void		SiS_WaitRetrace1(struct SiS_Private *SiS_Pr);
@@ -375,9 +364,6 @@
 			unsigned short RefreshRateTableIndex);
 unsigned short	SiS_GetResInfo(struct SiS_Private *SiS_Pr,unsigned short ModeNo,unsigned short ModeIdIndex);
 void		SiS_DisableBridge(struct SiS_Private *SiS_Pr);
-#ifndef SIS_LINUX_KERNEL
-void		SiS_EnableBridge(struct SiS_Private *SiS_Pr);
-#endif
 bool		SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
 void		SiS_SiS30xBLOn(struct SiS_Private *SiS_Pr);
 void		SiS_SiS30xBLOff(struct SiS_Private *SiS_Pr);
@@ -386,13 +372,9 @@
 unsigned short	SiS_GetCH700x(struct SiS_Private *SiS_Pr, unsigned short tempax);
 void		SiS_SetCH701x(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val);
 unsigned short	SiS_GetCH701x(struct SiS_Private *SiS_Pr, unsigned short tempax);
-#ifndef SIS_LINUX_KERNEL
-void		SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val);
-unsigned short	SiS_GetCH70xx(struct SiS_Private *SiS_Pr, unsigned short tempax);
-#endif
 void		SiS_SetCH70xxANDOR(struct SiS_Private *SiS_Pr, unsigned short reg,
 			unsigned char orval,unsigned short andval);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void	SiS_Chrontel701xOn(struct SiS_Private *SiS_Pr);
 static void	SiS_Chrontel701xOff(struct SiS_Private *SiS_Pr);
 static void	SiS_ChrontelInitTVVSync(struct SiS_Private *SiS_Pr);
@@ -401,7 +383,7 @@
 void		SiS_Chrontel701xBLOff(struct SiS_Private *SiS_Pr);
 #endif /* 315 */
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static  bool	SiS_SetTrumpionBlock(struct SiS_Private *SiS_Pr, unsigned char *dataptr);
 void		SiS_SetChrontelGPIO(struct SiS_Private *SiS_Pr, unsigned short myvbinfo);
 #endif
@@ -412,21 +394,12 @@
 			unsigned short adaptnum, unsigned short DDCdatatype,
 			unsigned char *buffer, unsigned int VBFlags2);
 
-#ifdef SIS_XORG_XF86
-unsigned short		SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags,
-				int VGAEngine, unsigned short adaptnum, unsigned short DDCdatatype,
-				bool checkcr32, unsigned int VBFlags2);
-unsigned short		SiS_ProbeDDC(struct SiS_Private *SiS_Pr);
-unsigned short		SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype,
-				unsigned char *buffer);
-#else
 static unsigned short	SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags,
 				int VGAEngine, unsigned short adaptnum, unsigned short DDCdatatype,
 				bool checkcr32, unsigned int VBFlags2);
 static unsigned short	SiS_ProbeDDC(struct SiS_Private *SiS_Pr);
 static unsigned short	SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype,
 				unsigned char *buffer);
-#endif
 static void		SiS_SetSwitchDDC2(struct SiS_Private *SiS_Pr);
 static unsigned short	SiS_SetStart(struct SiS_Private *SiS_Pr);
 static unsigned short	SiS_SetStop(struct SiS_Private *SiS_Pr);
@@ -441,13 +414,13 @@
 static void		SiS_SendACK(struct SiS_Private *SiS_Pr, unsigned short yesno);
 static unsigned short	SiS_DoProbeDDC(struct SiS_Private *SiS_Pr);
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static void		SiS_OEM300Setting(struct SiS_Private *SiS_Pr,
 				unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefTabindex);
 static void		SetOEMLCDData2(struct SiS_Private *SiS_Pr,
 				unsigned short ModeNo, unsigned short ModeIdIndex,unsigned short RefTableIndex);
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void		SiS_OEM310Setting(struct SiS_Private *SiS_Pr,
 				unsigned short ModeNo,unsigned short ModeIdIndex, unsigned short RRTI);
 static void		SiS_OEM661Setting(struct SiS_Private *SiS_Pr,
@@ -482,15 +455,13 @@
 extern void		SiS_CalcCRRegisters(struct SiS_Private *SiS_Pr, int depth);
 extern unsigned short	SiS_GetRefCRTVCLK(struct SiS_Private *SiS_Pr, unsigned short Index, int UseWide);
 extern unsigned short	SiS_GetRefCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short Index, int UseWide);
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 extern void		SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *tempbx,
 				unsigned short *tempcl);
 extern unsigned short	SiS_GetFIFOThresholdB300(unsigned short tempbx, unsigned short tempcl);
 extern unsigned short	SiS_GetLatencyFactor630(struct SiS_Private *SiS_Pr, unsigned short index);
-#ifdef SIS_LINUX_KERNEL
 extern unsigned int	sisfb_read_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg);
 extern unsigned int	sisfb_read_lpc_pci_dword(struct SiS_Private *SiS_Pr, int reg);
 #endif
-#endif
 
 #endif
diff --git a/drivers/video/sis/initextlfb.c b/drivers/video/sis/initextlfb.c
index 99c04a4..9dec64d 100644
--- a/drivers/video/sis/initextlfb.c
+++ b/drivers/video/sis/initextlfb.c
@@ -25,7 +25,6 @@
  * Author:	Thomas Winischhofer <thomas@winischhofer.net>
  */
 
-#include "osdef.h"
 #include "initdef.h"
 #include "vgatypes.h"
 #include "vstruct.h"
@@ -59,7 +58,7 @@
 
     if(rateindex > 0) rateindex--;
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
     switch(ModeNo) {
     case 0x5a: ModeNo = 0x50; break;
     case 0x5b: ModeNo = 0x56;
@@ -103,7 +102,7 @@
 
     if(rateindex > 0) rateindex--;
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
     switch(ModeNo) {
        case 0x5a: ModeNo = 0x50; break;
        case 0x5b: ModeNo = 0x56;
@@ -187,7 +186,7 @@
 
     if(rateindex > 0) rateindex--;
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
     switch(ModeNo) {
        case 0x5a: ModeNo = 0x50; break;
        case 0x5b: ModeNo = 0x56;
diff --git a/drivers/video/sis/osdef.h b/drivers/video/sis/osdef.h
deleted file mode 100644
index 6ff8f98..0000000
--- a/drivers/video/sis/osdef.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* $XFree86$ */
-/* $XdotOrg$ */
-/*
- * OS depending defines
- *
- * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria
- *
- * If distributed as part of the Linux kernel, the following license terms
- * apply:
- *
- * * This program is free software; you can redistribute it and/or modify
- * * it under the terms of the GNU General Public License as published by
- * * the Free Software Foundation; either version 2 of the named License,
- * * or any later version.
- * *
- * * This program is distributed in the hope that it will be useful,
- * * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * * GNU General Public License for more details.
- * *
- * * You should have received a copy of the GNU General Public License
- * * along with this program; if not, write to the Free Software
- * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
- *
- * Otherwise, the following license terms apply:
- *
- * * Redistribution and use in source and binary forms, with or without
- * * modification, are permitted provided that the following conditions
- * * are met:
- * * 1) Redistributions of source code must retain the above copyright
- * *    notice, this list of conditions and the following disclaimer.
- * * 2) Redistributions in binary form must reproduce the above copyright
- * *    notice, this list of conditions and the following disclaimer in the
- * *    documentation and/or other materials provided with the distribution.
- * * 3) The name of the author may not be used to endorse or promote products
- * *    derived from this software without specific prior written permission.
- * *
- * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Author: 	Thomas Winischhofer <thomas@winischhofer.net>
- *		Silicon Integrated Systems, Inc. (used by permission)
- *
- */
-
-#ifndef _SIS_OSDEF_H_
-#define _SIS_OSDEF_H_
-
-/* The choices are: */
-#define SIS_LINUX_KERNEL		/* Linux kernel framebuffer */
-#undef  SIS_XORG_XF86			/* XFree86/X.org */
-
-#ifdef OutPortByte
-#undef OutPortByte
-#endif
-
-#ifdef OutPortWord
-#undef OutPortWord
-#endif
-
-#ifdef OutPortLong
-#undef OutPortLong
-#endif
-
-#ifdef InPortByte
-#undef InPortByte
-#endif
-
-#ifdef InPortWord
-#undef InPortWord
-#endif
-
-#ifdef InPortLong
-#undef InPortLong
-#endif
-
-/**********************************************************************/
-/*  LINUX KERNEL                                                      */
-/**********************************************************************/
-
-#ifdef SIS_LINUX_KERNEL
-
-#ifdef CONFIG_FB_SIS_300
-#define SIS300
-#endif
-
-#ifdef CONFIG_FB_SIS_315
-#define SIS315H
-#endif
-
-#if !defined(SIS300) && !defined(SIS315H)
-#warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is set
-#warning sisfb will not work!
-#endif
-
-#define OutPortByte(p,v) outb((u8)(v),(SISIOADDRESS)(p))
-#define OutPortWord(p,v) outw((u16)(v),(SISIOADDRESS)(p))
-#define OutPortLong(p,v) outl((u32)(v),(SISIOADDRESS)(p))
-#define InPortByte(p)    inb((SISIOADDRESS)(p))
-#define InPortWord(p)    inw((SISIOADDRESS)(p))
-#define InPortLong(p)    inl((SISIOADDRESS)(p))
-#define SiS_SetMemory(MemoryAddress,MemorySize,value) memset_io(MemoryAddress, value, MemorySize)
-
-#endif /* LINUX_KERNEL */
-
-/**********************************************************************/
-/*  XFree86/X.org                                                    */
-/**********************************************************************/
-
-#ifdef SIS_XORG_XF86
-
-#define SIS300
-#define SIS315H
-
-#define OutPortByte(p,v) outSISREG((IOADDRESS)(p),(CARD8)(v))
-#define OutPortWord(p,v) outSISREGW((IOADDRESS)(p),(CARD16)(v))
-#define OutPortLong(p,v) outSISREGL((IOADDRESS)(p),(CARD32)(v))
-#define InPortByte(p)    inSISREG((IOADDRESS)(p))
-#define InPortWord(p)    inSISREGW((IOADDRESS)(p))
-#define InPortLong(p)    inSISREGL((IOADDRESS)(p))
-#define SiS_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize)
-
-#endif /* XF86 */
-
-#endif  /* _OSDEF_H_ */
diff --git a/drivers/video/sis/sis.h b/drivers/video/sis/sis.h
index 7c5710e..80d89d3 100644
--- a/drivers/video/sis/sis.h
+++ b/drivers/video/sis/sis.h
@@ -24,7 +24,6 @@
 #ifndef _SIS_H_
 #define _SIS_H_
 
-#include "osdef.h"
 #include <video/sisfb.h>
 
 #include "vgatypes.h"
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 3dde12b..7e3370f 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -60,6 +60,11 @@
 #include "sis.h"
 #include "sis_main.h"
 
+#if !defined(CONFIG_FB_SIS_300) && !defined(CONFIG_FB_SIS_315)
+#warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is set
+#warning sisfb will not work!
+#endif
+
 static void sisfb_handle_command(struct sis_video_info *ivideo,
 				 struct sisfb_cmd *sisfb_command);
 
@@ -4114,14 +4119,6 @@
 			if(sisfb_check_rom(rom_base, ivideo)) {
 
 				if((myrombase = vmalloc(65536))) {
-
-					/* Work around bug in pci/rom.c: Folks forgot to check
-					 * whether the size retrieved from the BIOS image eventually
-					 * is larger than the mapped size
-					 */
-					if(pci_resource_len(pdev, PCI_ROM_RESOURCE) < romsize)
-						romsize = pci_resource_len(pdev, PCI_ROM_RESOURCE);
-
 					memcpy_fromio(myrombase, rom_base,
 							(romsize > 65536) ? 65536 : romsize);
 				}
@@ -4155,23 +4152,6 @@
 
         }
 
-#else
-
-	pci_read_config_dword(pdev, PCI_ROM_ADDRESS, &temp);
-	pci_write_config_dword(pdev, PCI_ROM_ADDRESS,
-			(ivideo->video_base & PCI_ROM_ADDRESS_MASK) | PCI_ROM_ADDRESS_ENABLE);
-
-	rom_base = ioremap(ivideo->video_base, 65536);
-	if(rom_base) {
-		if(sisfb_check_rom(rom_base, ivideo)) {
-			if((myrombase = vmalloc(65536)))
-				memcpy_fromio(myrombase, rom_base, 65536);
-		}
-		iounmap(rom_base);
-	}
-
-	pci_write_config_dword(pdev, PCI_ROM_ADDRESS, temp);
-
 #endif
 
 	return myrombase;
diff --git a/drivers/video/sis/vgatypes.h b/drivers/video/sis/vgatypes.h
index 81a22ea..12c0dfa 100644
--- a/drivers/video/sis/vgatypes.h
+++ b/drivers/video/sis/vgatypes.h
@@ -55,21 +55,10 @@
 
 #define SISIOMEMTYPE
 
-#ifdef SIS_LINUX_KERNEL
 typedef unsigned long SISIOADDRESS;
 #include <linux/types.h>  /* Need __iomem */
 #undef SISIOMEMTYPE
 #define SISIOMEMTYPE __iomem
-#endif
-
-#ifdef SIS_XORG_XF86
-#if XF86_VERSION_CURRENT < XF86_VERSION_NUMERIC(4,2,0,0,0)
-typedef unsigned long IOADDRESS;
-typedef unsigned long SISIOADDRESS;
-#else
-typedef IOADDRESS SISIOADDRESS;
-#endif
-#endif
 
 typedef enum _SIS_CHIP_TYPE {
     SIS_VGALegacy = 0,
diff --git a/drivers/video/sis/vstruct.h b/drivers/video/sis/vstruct.h
index bef4aae..ea94d21 100644
--- a/drivers/video/sis/vstruct.h
+++ b/drivers/video/sis/vstruct.h
@@ -233,24 +233,15 @@
 {
 	unsigned char			ChipType;
 	unsigned char			ChipRevision;
-#ifdef SIS_XORG_XF86
-	PCITAG				PciTag;
-#endif
-#ifdef SIS_LINUX_KERNEL
 	void				*ivideo;
-#endif
 	unsigned char 			*VirtualRomBase;
 	bool				UseROM;
-#ifdef SIS_LINUX_KERNEL
 	unsigned char SISIOMEMTYPE	*VideoMemoryAddress;
 	unsigned int			VideoMemorySize;
-#endif
 	SISIOADDRESS			IOAddress;
 	SISIOADDRESS			IOAddress2;  /* For dual chip XGI volari */
 
-#ifdef SIS_LINUX_KERNEL
 	SISIOADDRESS			RelIO;
-#endif
 	SISIOADDRESS			SiS_P3c4;
 	SISIOADDRESS			SiS_P3d4;
 	SISIOADDRESS			SiS_P3c0;
@@ -280,9 +271,6 @@
 	unsigned short			SiS_IF_DEF_FSTN;
 	unsigned short			SiS_SysFlags;
 	unsigned char			SiS_VGAINFO;
-#ifdef SIS_XORG_XF86
-	unsigned short			SiS_CP1, SiS_CP2, SiS_CP3, SiS_CP4;
-#endif
 	bool				SiS_UseROM;
 	bool				SiS_ROMNew;
 	bool				SiS_XGIROM;
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 3a43ebf..efb35aa 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -9,19 +9,19 @@
 			   struct device_attribute *attr, char *buf)
 {
 	struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
-	return sprintf(buf, "%hu", dev->id.device);
+	return sprintf(buf, "0x%04x\n", dev->id.device);
 }
 static ssize_t vendor_show(struct device *_d,
 			   struct device_attribute *attr, char *buf)
 {
 	struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
-	return sprintf(buf, "%hu", dev->id.vendor);
+	return sprintf(buf, "0x%04x\n", dev->id.vendor);
 }
 static ssize_t status_show(struct device *_d,
 			   struct device_attribute *attr, char *buf)
 {
 	struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
-	return sprintf(buf, "0x%08x", dev->config->get_status(dev));
+	return sprintf(buf, "0x%08x\n", dev->config->get_status(dev));
 }
 static ssize_t modalias_show(struct device *_d,
 			     struct device_attribute *attr, char *buf)
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 1475ed6..cc2f73e 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -230,9 +230,6 @@
 	pr_debug("Added buffer head %i to %p\n", head, vq);
 	END_USE(vq);
 
-	/* If we're indirect, we can fit many (assuming not OOM). */
-	if (vq->indirect)
-		return vq->num_free ? vq->vring.num : 0;
 	return vq->num_free;
 }
 EXPORT_SYMBOL_GPL(virtqueue_add_buf_gfp);
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index eb8a78d..533a199 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -8,9 +8,12 @@
 obj-$(CONFIG_HOTPLUG_CPU)	+= cpu_hotplug.o
 obj-$(CONFIG_XEN_XENCOMM)	+= xencomm.o
 obj-$(CONFIG_XEN_BALLOON)	+= balloon.o
-obj-$(CONFIG_XEN_DEV_EVTCHN)	+= evtchn.o
+obj-$(CONFIG_XEN_DEV_EVTCHN)	+= xen-evtchn.o
 obj-$(CONFIG_XENFS)		+= xenfs/
 obj-$(CONFIG_XEN_SYS_HYPERVISOR)	+= sys-hypervisor.o
 obj-$(CONFIG_XEN_PLATFORM_PCI)	+= platform-pci.o
 obj-$(CONFIG_SWIOTLB_XEN)	+= swiotlb-xen.o
 obj-$(CONFIG_XEN_DOM0)		+= pci.o
+
+xen-evtchn-y			:= evtchn.o
+
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 500290b..2b17ad5 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -50,6 +50,7 @@
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
 #include <asm/tlb.h>
+#include <asm/e820.h>
 
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/hypercall.h>
@@ -119,7 +120,7 @@
 }
 
 /* balloon_append: add the given page to the balloon. */
-static void balloon_append(struct page *page)
+static void __balloon_append(struct page *page)
 {
 	/* Lowmem is re-populated first, so highmem pages go at list tail. */
 	if (PageHighMem(page)) {
@@ -130,7 +131,11 @@
 		list_add(&page->lru, &ballooned_pages);
 		balloon_stats.balloon_low++;
 	}
+}
 
+static void balloon_append(struct page *page)
+{
+	__balloon_append(page);
 	totalram_pages--;
 }
 
@@ -191,7 +196,7 @@
 
 static int increase_reservation(unsigned long nr_pages)
 {
-	unsigned long  pfn, i, flags;
+	unsigned long  pfn, i;
 	struct page   *page;
 	long           rc;
 	struct xen_memory_reservation reservation = {
@@ -203,8 +208,6 @@
 	if (nr_pages > ARRAY_SIZE(frame_list))
 		nr_pages = ARRAY_SIZE(frame_list);
 
-	spin_lock_irqsave(&xen_reservation_lock, flags);
-
 	page = balloon_first_page();
 	for (i = 0; i < nr_pages; i++) {
 		BUG_ON(page == NULL);
@@ -247,14 +250,12 @@
 	balloon_stats.current_pages += rc;
 
  out:
-	spin_unlock_irqrestore(&xen_reservation_lock, flags);
-
 	return rc < 0 ? rc : rc != nr_pages;
 }
 
 static int decrease_reservation(unsigned long nr_pages)
 {
-	unsigned long  pfn, i, flags;
+	unsigned long  pfn, i;
 	struct page   *page;
 	int            need_sleep = 0;
 	int ret;
@@ -292,8 +293,6 @@
 	kmap_flush_unused();
 	flush_tlb_all();
 
-	spin_lock_irqsave(&xen_reservation_lock, flags);
-
 	/* No more mappings: invalidate P2M and add to balloon. */
 	for (i = 0; i < nr_pages; i++) {
 		pfn = mfn_to_pfn(frame_list[i]);
@@ -308,8 +307,6 @@
 
 	balloon_stats.current_pages -= nr_pages;
 
-	spin_unlock_irqrestore(&xen_reservation_lock, flags);
-
 	return need_sleep;
 }
 
@@ -395,7 +392,7 @@
 
 static int __init balloon_init(void)
 {
-	unsigned long pfn;
+	unsigned long pfn, extra_pfn_end;
 	struct page *page;
 
 	if (!xen_pv_domain())
@@ -416,10 +413,15 @@
 	register_balloon(&balloon_sysdev);
 
 	/* Initialise the balloon with excess memory space. */
-	for (pfn = xen_start_info->nr_pages; pfn < max_pfn; pfn++) {
+	extra_pfn_end = min(e820_end_of_ram_pfn(),
+			    (unsigned long)PFN_DOWN(xen_extra_mem_start + xen_extra_mem_size));
+	for (pfn = PFN_UP(xen_extra_mem_start);
+	     pfn < extra_pfn_end;
+	     pfn++) {
 		page = pfn_to_page(pfn);
-		if (!PageReserved(page))
-			balloon_append(page);
+		/* totalram_pages doesn't include the boot-time
+		   balloon extension, so don't subtract from it. */
+		__balloon_append(page);
 	}
 
 	target_watch.callback = watch_target;
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 321a0c8..2811bb9 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -278,17 +278,17 @@
 	cpumask_copy(irq_to_desc(irq)->affinity, cpumask_of(cpu));
 #endif
 
-	__clear_bit(chn, cpu_evtchn_mask(cpu_from_irq(irq)));
-	__set_bit(chn, cpu_evtchn_mask(cpu));
+	clear_bit(chn, cpu_evtchn_mask(cpu_from_irq(irq)));
+	set_bit(chn, cpu_evtchn_mask(cpu));
 
 	irq_info[irq].cpu = cpu;
 }
 
 static void init_evtchn_cpu_bindings(void)
 {
+	int i;
 #ifdef CONFIG_SMP
 	struct irq_desc *desc;
-	int i;
 
 	/* By default all event channels notify CPU#0. */
 	for_each_irq_desc(i, desc) {
@@ -296,7 +296,10 @@
 	}
 #endif
 
-	memset(cpu_evtchn_mask(0), ~0, sizeof(struct cpu_evtchn_s));
+	for_each_possible_cpu(i)
+		memset(cpu_evtchn_mask(i),
+		       (i == 0) ? ~0 : 0, sizeof(struct cpu_evtchn_s));
+
 }
 
 static inline void clear_evtchn(int port)
@@ -752,7 +755,7 @@
 		goto out;
 
 	if (xen_initial_domain()) {
-		unmap_irq.pirq = info->u.pirq.gsi;
+		unmap_irq.pirq = info->u.pirq.pirq;
 		unmap_irq.domid = DOMID_SELF;
 		rc = HYPERVISOR_physdev_op(PHYSDEVOP_unmap_pirq, &unmap_irq);
 		if (rc) {
diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index fec6ba3..ef11daf 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -69,20 +69,51 @@
 	const char *name;
 };
 
-/* Who's bound to each port? */
-static struct per_user_data *port_user[NR_EVENT_CHANNELS];
+/*
+ * Who's bound to each port?  This is logically an array of struct
+ * per_user_data *, but we encode the current enabled-state in bit 0.
+ */
+static unsigned long *port_user;
 static DEFINE_SPINLOCK(port_user_lock); /* protects port_user[] and ring_prod */
 
-irqreturn_t evtchn_interrupt(int irq, void *data)
+static inline struct per_user_data *get_port_user(unsigned port)
+{
+	return (struct per_user_data *)(port_user[port] & ~1);
+}
+
+static inline void set_port_user(unsigned port, struct per_user_data *u)
+{
+	port_user[port] = (unsigned long)u;
+}
+
+static inline bool get_port_enabled(unsigned port)
+{
+	return port_user[port] & 1;
+}
+
+static inline void set_port_enabled(unsigned port, bool enabled)
+{
+	if (enabled)
+		port_user[port] |= 1;
+	else
+		port_user[port] &= ~1;
+}
+
+static irqreturn_t evtchn_interrupt(int irq, void *data)
 {
 	unsigned int port = (unsigned long)data;
 	struct per_user_data *u;
 
 	spin_lock(&port_user_lock);
 
-	u = port_user[port];
+	u = get_port_user(port);
+
+	WARN(!get_port_enabled(port),
+	     "Interrupt for port %d, but apparently not enabled; per-user %p\n",
+	     port, u);
 
 	disable_irq_nosync(irq);
+	set_port_enabled(port, false);
 
 	if ((u->ring_prod - u->ring_cons) < EVTCHN_RING_SIZE) {
 		u->ring[EVTCHN_RING_MASK(u->ring_prod)] = port;
@@ -92,9 +123,8 @@
 			kill_fasync(&u->evtchn_async_queue,
 				    SIGIO, POLL_IN);
 		}
-	} else {
+	} else
 		u->ring_overflow = 1;
-	}
 
 	spin_unlock(&port_user_lock);
 
@@ -198,9 +228,18 @@
 		goto out;
 
 	spin_lock_irq(&port_user_lock);
-	for (i = 0; i < (count/sizeof(evtchn_port_t)); i++)
-		if ((kbuf[i] < NR_EVENT_CHANNELS) && (port_user[kbuf[i]] == u))
-			enable_irq(irq_from_evtchn(kbuf[i]));
+
+	for (i = 0; i < (count/sizeof(evtchn_port_t)); i++) {
+		unsigned port = kbuf[i];
+
+		if (port < NR_EVENT_CHANNELS &&
+		    get_port_user(port) == u &&
+		    !get_port_enabled(port)) {
+			set_port_enabled(port, true);
+			enable_irq(irq_from_evtchn(port));
+		}
+	}
+
 	spin_unlock_irq(&port_user_lock);
 
 	rc = count;
@@ -222,8 +261,9 @@
 	 * interrupt handler yet, and our caller has already
 	 * serialized bind operations.)
 	 */
-	BUG_ON(port_user[port] != NULL);
-	port_user[port] = u;
+	BUG_ON(get_port_user(port) != NULL);
+	set_port_user(port, u);
+	set_port_enabled(port, true); /* start enabled */
 
 	rc = bind_evtchn_to_irqhandler(port, evtchn_interrupt, IRQF_DISABLED,
 				       u->name, (void *)(unsigned long)port);
@@ -239,10 +279,7 @@
 
 	unbind_from_irqhandler(irq, (void *)(unsigned long)port);
 
-	/* make sure we unbind the irq handler before clearing the port */
-	barrier();
-
-	port_user[port] = NULL;
+	set_port_user(port, NULL);
 }
 
 static long evtchn_ioctl(struct file *file,
@@ -333,15 +370,17 @@
 		spin_lock_irq(&port_user_lock);
 
 		rc = -ENOTCONN;
-		if (port_user[unbind.port] != u) {
+		if (get_port_user(unbind.port) != u) {
 			spin_unlock_irq(&port_user_lock);
 			break;
 		}
 
-		evtchn_unbind_from_user(u, unbind.port);
+		disable_irq(irq_from_evtchn(unbind.port));
 
 		spin_unlock_irq(&port_user_lock);
 
+		evtchn_unbind_from_user(u, unbind.port);
+
 		rc = 0;
 		break;
 	}
@@ -355,7 +394,7 @@
 
 		if (notify.port >= NR_EVENT_CHANNELS) {
 			rc = -EINVAL;
-		} else if (port_user[notify.port] != u) {
+		} else if (get_port_user(notify.port) != u) {
 			rc = -ENOTCONN;
 		} else {
 			notify_remote_via_evtchn(notify.port);
@@ -431,7 +470,7 @@
 
 	filp->private_data = u;
 
-	return 0;
+	return nonseekable_open(inode, filp);;
 }
 
 static int evtchn_release(struct inode *inode, struct file *filp)
@@ -444,14 +483,21 @@
 	free_page((unsigned long)u->ring);
 
 	for (i = 0; i < NR_EVENT_CHANNELS; i++) {
-		if (port_user[i] != u)
+		if (get_port_user(i) != u)
 			continue;
 
-		evtchn_unbind_from_user(port_user[i], i);
+		disable_irq(irq_from_evtchn(i));
 	}
 
 	spin_unlock_irq(&port_user_lock);
 
+	for (i = 0; i < NR_EVENT_CHANNELS; i++) {
+		if (get_port_user(i) != u)
+			continue;
+
+		evtchn_unbind_from_user(get_port_user(i), i);
+	}
+
 	kfree(u->name);
 	kfree(u);
 
@@ -467,12 +513,12 @@
 	.fasync  = evtchn_fasync,
 	.open    = evtchn_open,
 	.release = evtchn_release,
-	.llseek = noop_llseek,
+	.llseek	 = no_llseek,
 };
 
 static struct miscdevice evtchn_miscdev = {
 	.minor        = MISC_DYNAMIC_MINOR,
-	.name         = "evtchn",
+	.name         = "xen/evtchn",
 	.fops         = &evtchn_fops,
 };
 static int __init evtchn_init(void)
@@ -482,8 +528,11 @@
 	if (!xen_domain())
 		return -ENODEV;
 
+	port_user = kcalloc(NR_EVENT_CHANNELS, sizeof(*port_user), GFP_KERNEL);
+	if (port_user == NULL)
+		return -ENOMEM;
+
 	spin_lock_init(&port_user_lock);
-	memset(port_user, 0, sizeof(port_user));
 
 	/* Create '/dev/misc/evtchn'. */
 	err = misc_register(&evtchn_miscdev);
@@ -499,6 +548,9 @@
 
 static void __exit evtchn_cleanup(void)
 {
+	kfree(port_user);
+	port_user = NULL;
+
 	misc_deregister(&evtchn_miscdev);
 }
 
diff --git a/drivers/xen/xenfs/privcmd.c b/drivers/xen/xenfs/privcmd.c
index 0f5d416..dbd3b16 100644
--- a/drivers/xen/xenfs/privcmd.c
+++ b/drivers/xen/xenfs/privcmd.c
@@ -265,9 +265,7 @@
 	xen_pfn_t *mfnp = data;
 	struct mmap_batch_state *st = state;
 
-	put_user(*mfnp, st->user++);
-
-	return 0;
+	return put_user(*mfnp, st->user++);
 }
 
 static struct vm_operations_struct privcmd_vm_ops;
@@ -322,10 +320,8 @@
 	up_write(&mm->mmap_sem);
 
 	if (state.err > 0) {
-		ret = 0;
-
 		state.user = m.arr;
-		traverse_pages(m.num, sizeof(xen_pfn_t),
+		ret = traverse_pages(m.num, sizeof(xen_pfn_t),
 			       &pagelist,
 			       mmap_return_errors, &state);
 	}
@@ -383,8 +379,9 @@
 	if (xen_feature(XENFEAT_auto_translated_physmap))
 		return -ENOSYS;
 
-	/* DONTCOPY is essential for Xen as copy_page_range is broken. */
-	vma->vm_flags |= VM_RESERVED | VM_IO | VM_DONTCOPY;
+	/* DONTCOPY is essential for Xen because copy_page_range doesn't know
+	 * how to recreate these mappings */
+	vma->vm_flags |= VM_RESERVED | VM_IO | VM_DONTCOPY | VM_PFNMAP;
 	vma->vm_ops = &privcmd_vm_ops;
 	vma->vm_private_data = NULL;
 
diff --git a/drivers/xen/xenfs/super.c b/drivers/xen/xenfs/super.c
index f6339d1..1aa3897 100644
--- a/drivers/xen/xenfs/super.c
+++ b/drivers/xen/xenfs/super.c
@@ -12,8 +12,6 @@
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/magic.h>
-#include <linux/mm.h>
-#include <linux/backing-dev.h>
 
 #include <xen/xen.h>
 
@@ -24,28 +22,12 @@
 MODULE_DESCRIPTION("Xen filesystem");
 MODULE_LICENSE("GPL");
 
-static int xenfs_set_page_dirty(struct page *page)
-{
-	return !TestSetPageDirty(page);
-}
-
-static const struct address_space_operations xenfs_aops = {
-	.set_page_dirty = xenfs_set_page_dirty,
-};
-
-static struct backing_dev_info xenfs_backing_dev_info = {
-	.ra_pages	= 0,	/* No readahead */
-	.capabilities	= BDI_CAP_NO_ACCT_AND_WRITEBACK,
-};
-
 static struct inode *xenfs_make_inode(struct super_block *sb, int mode)
 {
 	struct inode *ret = new_inode(sb);
 
 	if (ret) {
 		ret->i_mode = mode;
-		ret->i_mapping->a_ops = &xenfs_aops;
-		ret->i_mapping->backing_dev_info = &xenfs_backing_dev_info;
 		ret->i_uid = ret->i_gid = 0;
 		ret->i_blocks = 0;
 		ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME;
@@ -121,9 +103,9 @@
 	return rc;
 }
 
-static int xenfs_mount(struct file_system_type *fs_type,
-			int flags, const char *dev_name,
-			void *data)
+static struct dentry *xenfs_mount(struct file_system_type *fs_type,
+				  int flags, const char *dev_name,
+				  void *data)
 {
 	return mount_single(fs_type, flags, data, xenfs_fill_super);
 }
@@ -137,25 +119,11 @@
 
 static int __init xenfs_init(void)
 {
-	int err;
-	if (!xen_domain()) {
-		printk(KERN_INFO "xenfs: not registering filesystem on non-xen platform\n");
-		return 0;
-	}
+	if (xen_domain())
+		return register_filesystem(&xenfs_type);
 
-	err = register_filesystem(&xenfs_type);
-	if (err) {
-		printk(KERN_ERR "xenfs: Unable to register filesystem!\n");
-		goto out;
-	}
-
-	err = bdi_init(&xenfs_backing_dev_info);
-	if (err)
-		unregister_filesystem(&xenfs_type);
-
- out:
-
-	return err;
+	printk(KERN_INFO "XENFS: not registering filesystem on non-xen platform\n");
+	return 0;
 }
 
 static void __exit xenfs_exit(void)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index c822458..9242d29 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -134,6 +134,7 @@
 void fuse_finish_open(struct inode *inode, struct file *file)
 {
 	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = get_fuse_conn(inode);
 
 	if (ff->open_flags & FOPEN_DIRECT_IO)
 		file->f_op = &fuse_direct_io_file_operations;
@@ -141,6 +142,15 @@
 		invalidate_inode_pages2(inode->i_mapping);
 	if (ff->open_flags & FOPEN_NONSEEKABLE)
 		nonseekable_open(inode, file);
+	if (fc->atomic_o_trunc && (file->f_flags & O_TRUNC)) {
+		struct fuse_inode *fi = get_fuse_inode(inode);
+
+		spin_lock(&fc->lock);
+		fi->attr_version = ++fc->attr_version;
+		i_size_write(inode, 0);
+		spin_unlock(&fc->lock);
+		fuse_invalidate_attr(inode);
+	}
 }
 
 int fuse_open_common(struct inode *inode, struct file *file, bool isdir)
diff --git a/fs/ioprio.c b/fs/ioprio.c
index 2f7d05c..7da2a06 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -103,22 +103,15 @@
 	}
 
 	ret = -ESRCH;
-	/*
-	 * We want IOPRIO_WHO_PGRP/IOPRIO_WHO_USER to be "atomic",
-	 * so we can't use rcu_read_lock(). See re-copy of ->ioprio
-	 * in copy_process().
-	 */
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 	switch (which) {
 		case IOPRIO_WHO_PROCESS:
-			rcu_read_lock();
 			if (!who)
 				p = current;
 			else
 				p = find_task_by_vpid(who);
 			if (p)
 				ret = set_task_ioprio(p, ioprio);
-			rcu_read_unlock();
 			break;
 		case IOPRIO_WHO_PGRP:
 			if (!who)
@@ -141,12 +134,7 @@
 				break;
 
 			do_each_thread(g, p) {
-				int match;
-
-				rcu_read_lock();
-				match = __task_cred(p)->uid == who;
-				rcu_read_unlock();
-				if (!match)
+				if (__task_cred(p)->uid != who)
 					continue;
 				ret = set_task_ioprio(p, ioprio);
 				if (ret)
@@ -160,7 +148,7 @@
 			ret = -EINVAL;
 	}
 
-	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 	return ret;
 }
 
@@ -204,17 +192,15 @@
 	int ret = -ESRCH;
 	int tmpio;
 
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 	switch (which) {
 		case IOPRIO_WHO_PROCESS:
-			rcu_read_lock();
 			if (!who)
 				p = current;
 			else
 				p = find_task_by_vpid(who);
 			if (p)
 				ret = get_task_ioprio(p);
-			rcu_read_unlock();
 			break;
 		case IOPRIO_WHO_PGRP:
 			if (!who)
@@ -241,12 +227,7 @@
 				break;
 
 			do_each_thread(g, p) {
-				int match;
-
-				rcu_read_lock();
-				match = __task_cred(p)->uid == user->uid;
-				rcu_read_unlock();
-				if (!match)
+				if (__task_cred(p)->uid != user->uid)
 					continue;
 				tmpio = get_task_ioprio(p);
 				if (tmpio < 0)
@@ -264,6 +245,6 @@
 			ret = -EINVAL;
 	}
 
-	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 	return ret;
 }
diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c
index 49c844d..59e5fe7 100644
--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -335,7 +335,7 @@
 	 * the device at this point.
 	 *
 	 * To prevent nilfs_dat_translate() from returning the
-	 * uncommited block number, this makes a copy of the entry
+	 * uncommitted block number, this makes a copy of the entry
 	 * buffer and redirects nilfs_dat_translate() to the copy.
 	 */
 	if (!buffer_nilfs_redirected(entry_bh)) {
diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index 3e90f86..e00d945 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -349,8 +349,8 @@
 		ino = vdesc->vd_ino;
 		cno = vdesc->vd_cno;
 		inode = nilfs_iget_for_gc(sb, ino, cno);
-		if (unlikely(inode == NULL)) {
-			ret = -ENOMEM;
+		if (IS_ERR(inode)) {
+			ret = PTR_ERR(inode);
 			goto failed;
 		}
 		do {
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index da6b01d..c126c83 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -706,6 +706,7 @@
  * skip over unmapped regions.
  */
 #define PAGEMAP_WALK_SIZE	(PMD_SIZE)
+#define PAGEMAP_WALK_MASK	(PMD_MASK)
 static ssize_t pagemap_read(struct file *file, char __user *buf,
 			    size_t count, loff_t *ppos)
 {
@@ -776,7 +777,7 @@
 		unsigned long end;
 
 		pm.pos = 0;
-		end = start_vaddr + PAGEMAP_WALK_SIZE;
+		end = (start_vaddr + PAGEMAP_WALK_SIZE) & PAGEMAP_WALK_MASK;
 		/* overflow ? */
 		if (end < start_vaddr || end > end_vaddr)
 			end = end_vaddr;
diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c
index bd9763e..79265fd 100644
--- a/fs/reiserfs/ioctl.c
+++ b/fs/reiserfs/ioctl.c
@@ -183,12 +183,11 @@
 		return 0;
 	}
 
-	/* we need to make sure nobody is changing the file size beneath
-	 ** us
-	 */
-	reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb);
 	depth = reiserfs_write_lock_once(inode->i_sb);
 
+	/* we need to make sure nobody is changing the file size beneath us */
+	reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb);
+
 	write_from = inode->i_size & (blocksize - 1);
 	/* if we are on a block boundary, we are already unpacked.  */
 	if (write_from == 0) {
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index a7d9dc2..7b776d7 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -175,10 +175,21 @@
 	return 0;
 }
 
-#define enable_intr_remapping(mode)	(-1)
-#define disable_intr_remapping()	(0)
-#define reenable_intr_remapping(mode)	(0)
 #define intr_remapping_enabled		(0)
+
+static inline int enable_intr_remapping(int eim)
+{
+	return -1;
+}
+
+static inline void disable_intr_remapping(void)
+{
+}
+
+static inline int reenable_intr_remapping(int eim)
+{
+	return 0;
+}
 #endif
 
 /* Can't use the common MSI interrupt functions
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 7fca3dc..d1631d3 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1122,6 +1122,7 @@
 
 /* drivers/video/fbcmap.c */
 extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp);
+extern int fb_alloc_cmap_gfp(struct fb_cmap *cmap, int len, int transp, gfp_t flags);
 extern void fb_dealloc_cmap(struct fb_cmap *cmap);
 extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to);
 extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index eedc00b..c9e06cc 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -34,9 +34,9 @@
 #define SEEK_MAX	SEEK_END
 
 struct fstrim_range {
-	uint64_t start;
-	uint64_t len;
-	uint64_t minlen;
+	__u64 start;
+	__u64 len;
+	__u64 minlen;
 };
 
 /* And dynamically-tunable limits and defaults: */
diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h
index a2d6ea4..d1e55fe 100644
--- a/include/linux/hw_breakpoint.h
+++ b/include/linux/hw_breakpoint.h
@@ -33,6 +33,8 @@
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 
+extern int __init init_hw_breakpoint(void);
+
 static inline void hw_breakpoint_init(struct perf_event_attr *attr)
 {
 	memset(attr, 0, sizeof(*attr));
@@ -108,6 +110,8 @@
 
 #else /* !CONFIG_HAVE_HW_BREAKPOINT */
 
+static inline int __init init_hw_breakpoint(void) { return 0; }
+
 static inline struct perf_event *
 register_user_hw_breakpoint(struct perf_event_attr *attr,
 			    perf_overflow_handler_t triggered,
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index 1ff81b5..dd3c34e 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -11,6 +11,7 @@
 #define MARVELL_PHY_ID_88E1118		0x01410e10
 #define MARVELL_PHY_ID_88E1121R		0x01410cb0
 #define MARVELL_PHY_ID_88E1145		0x01410cd0
+#define MARVELL_PHY_ID_88E1149R		0x01410e50
 #define MARVELL_PHY_ID_88E1240		0x01410e30
 #define MARVELL_PHY_ID_88E1318S		0x01410e90
 
diff --git a/include/linux/mfd/wm8350/audio.h b/include/linux/mfd/wm8350/audio.h
index a95141e..bd581c6 100644
--- a/include/linux/mfd/wm8350/audio.h
+++ b/include/linux/mfd/wm8350/audio.h
@@ -522,9 +522,6 @@
 #define WM8350_MCLK_SEL_PLL_32K			3
 #define WM8350_MCLK_SEL_MCLK			5
 
-#define WM8350_MCLK_DIR_OUT			0
-#define WM8350_MCLK_DIR_IN			1
-
 /* clock divider id's */
 #define WM8350_ADC_CLKDIV			0
 #define WM8350_DAC_CLKDIV			1
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 6d87f68..30f6fad 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -168,6 +168,7 @@
 						/* DDR mode at 1.8V */
 #define MMC_CAP_1_2V_DDR	(1 << 12)	/* can support */
 						/* DDR mode at 1.2V */
+#define MMC_CAP_POWER_OFF_CARD	(1 << 13)	/* Can power off after boot */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
diff --git a/include/linux/module.h b/include/linux/module.h
index b29e745..7575bbb 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -517,7 +517,7 @@
 #define symbol_put_addr(p) do { } while(0)
 
 #endif /* CONFIG_MODULE_UNLOAD */
-int use_module(struct module *a, struct module *b);
+int ref_module(struct module *a, struct module *b);
 
 /* This is a #define so the string doesn't get put in every .o file */
 #define module_name(mod)			\
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index 5bb13b3..b02195d 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -59,8 +59,6 @@
 static inline int TestClearPageCgroup##uname(struct page_cgroup *pc)	\
 	{ return test_and_clear_bit(PCG_##lname, &pc->flags);  }
 
-TESTPCGFLAG(Locked, LOCK)
-
 /* Cache flag is set only once (at allocation) */
 TESTPCGFLAG(Cache, CACHE)
 CLEARPCGFLAG(Cache, CACHE)
@@ -104,6 +102,11 @@
 	bit_spin_unlock(PCG_LOCK, &pc->flags);
 }
 
+static inline int page_is_cgroup_locked(struct page_cgroup *pc)
+{
+	return bit_spin_is_locked(PCG_LOCK, &pc->flags);
+}
+
 #else /* CONFIG_CGROUP_MEM_RES_CTLR */
 struct page_cgroup;
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c6bcfe9..d369b53 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2441,6 +2441,7 @@
 #define PCI_DEVICE_ID_INTEL_MFD_SDIO2	0x0822
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC0	0x0823
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC1	0x0824
+#define PCI_DEVICE_ID_INTEL_MRST_SD2	0x084F
 #define PCI_DEVICE_ID_INTEL_I960	0x0960
 #define PCI_DEVICE_ID_INTEL_I960RM	0x0962
 #define PCI_DEVICE_ID_INTEL_8257X_SOL	0x1062
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index cea0c38..9a52f72 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -19,11 +19,13 @@
 };
 
 struct clk_ops {
+#ifdef CONFIG_SH_CLK_CPG_LEGACY
 	void (*init)(struct clk *clk);
+#endif
 	int (*enable)(struct clk *clk);
 	void (*disable)(struct clk *clk);
 	unsigned long (*recalc)(struct clk *clk);
-	int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
+	int (*set_rate)(struct clk *clk, unsigned long rate);
 	int (*set_parent)(struct clk *clk, struct clk *parent);
 	long (*round_rate)(struct clk *clk, unsigned long rate);
 };
@@ -67,36 +69,6 @@
 void clk_unregister(struct clk *);
 void clk_enable_init_clocks(void);
 
-/**
- * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
- * @clk: clock source
- * @rate: desired clock rate in Hz
- * @algo_id: algorithm id to be passed down to ops->set_rate
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
-
-enum clk_sh_algo_id {
-	NO_CHANGE = 0,
-
-	IUS_N1_N1,
-	IUS_322,
-	IUS_522,
-	IUS_N11,
-
-	SB_N1,
-
-	SB3_N1,
-	SB3_32,
-	SB3_43,
-	SB3_54,
-
-	BP_N1,
-
-	IP_N1,
-};
-
 struct clk_div_mult_table {
 	unsigned int *divisors;
 	unsigned int nr_divisors;
diff --git a/include/sound/sh_fsi.h b/include/sound/sh_fsi.h
index fa60cbd..d798941 100644
--- a/include/sound/sh_fsi.h
+++ b/include/sound/sh_fsi.h
@@ -85,7 +85,9 @@
  *     ACK_MD (FSI2)
  *     CKG1   (FSI)
  *
- * err:  return value < 0
+ * err		: return value <  0
+ * no change	: return value == 0
+ * change xMD	: return value >  0
  *
  * 0x-00000AB
  *
@@ -111,7 +113,7 @@
 struct sh_fsi_platform_info {
 	unsigned long porta_flags;
 	unsigned long portb_flags;
-	int (*set_rate)(int is_porta, int rate); /* for master mode */
+	int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 };
 
 #endif /* __SOUND_FSI_H */
diff --git a/include/video/da8xx-fb.h b/include/video/da8xx-fb.h
index 6316cda..89d43b3 100644
--- a/include/video/da8xx-fb.h
+++ b/include/video/da8xx-fb.h
@@ -99,7 +99,6 @@
 #define FBIPUT_COLOR		_IOW('F', 6, int)
 #define FBIPUT_HSYNC		_IOW('F', 9, int)
 #define FBIPUT_VSYNC		_IOW('F', 10, int)
-#define FBIO_WAITFORVSYNC	_IOW('F', 0x20, u_int32_t)
 
 #endif  /* ifndef DA8XX_FB_H */
 
diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h
index d7a6c13..eac3ce1 100644
--- a/include/xen/interface/memory.h
+++ b/include/xen/interface/memory.h
@@ -141,6 +141,19 @@
 DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list);
 
 /*
+ * Returns the location in virtual address space of the machine_to_phys
+ * mapping table. Architectures which do not have a m2p table, or which do not
+ * map it by default into guest address space, do not implement this command.
+ * arg == addr of xen_machphys_mapping_t.
+ */
+#define XENMEM_machphys_mapping     12
+struct xen_machphys_mapping {
+    unsigned long v_start, v_end; /* Start and end virtual addresses.   */
+    unsigned long max_mfn;        /* Maximum MFN that can be looked up. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mapping_t);
+
+/*
  * Sets the GPFN at which a particular page appears in the specified guest's
  * pseudophysical address space.
  * arg == addr of xen_add_to_physmap_t.
diff --git a/include/xen/page.h b/include/xen/page.h
index eaf85fa..0be36b9 100644
--- a/include/xen/page.h
+++ b/include/xen/page.h
@@ -1 +1,8 @@
+#ifndef _XEN_PAGE_H
+#define _XEN_PAGE_H
+
 #include <asm/xen/page.h>
+
+extern phys_addr_t xen_extra_mem_start, xen_extra_mem_size;
+
+#endif	/* _XEN_PAGE_H */
diff --git a/include/xen/privcmd.h b/include/xen/privcmd.h
index b42cdfd..17857fb 100644
--- a/include/xen/privcmd.h
+++ b/include/xen/privcmd.h
@@ -34,13 +34,10 @@
 #define __LINUX_PUBLIC_PRIVCMD_H__
 
 #include <linux/types.h>
+#include <linux/compiler.h>
 
 typedef unsigned long xen_pfn_t;
 
-#ifndef __user
-#define __user
-#endif
-
 struct privcmd_hypercall {
 	__u64 op;
 	__u64 arg[5];
diff --git a/init/Kconfig b/init/Kconfig
index 88c1046..c972899 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -613,6 +613,19 @@
 	  if boot option "noswapaccount" is set, swap will not be accounted.
 	  Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
 	  size is 4096bytes, 512k per 1Gbytes of swap.
+config CGROUP_MEM_RES_CTLR_SWAP_ENABLED
+	bool "Memory Resource Controller Swap Extension enabled by default"
+	depends on CGROUP_MEM_RES_CTLR_SWAP
+	default y
+	help
+	  Memory Resource Controller Swap Extension comes with its price in
+	  a bigger memory consumption. General purpose distribution kernels
+	  which want to enable the feautre but keep it disabled by default
+	  and let the user enable it by swapaccount boot command line
+	  parameter should have this option unselected.
+	  For those who want to have the feature enabled by default should
+	  select this option (if, for some reason, they need to disable it
+	  then noswapaccount does the trick).
 
 menuconfig CGROUP_SCHED
 	bool "Group CPU scheduler"
diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c
index 2c9120f..e532582 100644
--- a/kernel/hw_breakpoint.c
+++ b/kernel/hw_breakpoint.c
@@ -620,7 +620,7 @@
 	.read		= hw_breakpoint_pmu_read,
 };
 
-static int __init init_hw_breakpoint(void)
+int __init init_hw_breakpoint(void)
 {
 	unsigned int **task_bp_pinned;
 	int cpu, err_cpu;
@@ -655,6 +655,5 @@
 
 	return -ENOMEM;
 }
-core_initcall(init_hw_breakpoint);
 
 
diff --git a/kernel/irq_work.c b/kernel/irq_work.c
index f16763f..90f8819 100644
--- a/kernel/irq_work.c
+++ b/kernel/irq_work.c
@@ -145,7 +145,9 @@
 		 * Clear the BUSY bit and return to the free state if
 		 * no-one else claimed it meanwhile.
 		 */
-		cmpxchg(&entry->next, next_flags(NULL, IRQ_WORK_BUSY), NULL);
+		(void)cmpxchg(&entry->next,
+			      next_flags(NULL, IRQ_WORK_BUSY),
+			      NULL);
 	}
 }
 EXPORT_SYMBOL_GPL(irq_work_run);
diff --git a/kernel/module.c b/kernel/module.c
index 437a74a..d190664 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2326,6 +2326,18 @@
 	kmemleak_scan_area(mod->trace_events, sizeof(*mod->trace_events) *
 			   mod->num_trace_events, GFP_KERNEL);
 #endif
+#ifdef CONFIG_TRACING
+	mod->trace_bprintk_fmt_start = section_objs(info, "__trace_printk_fmt",
+					 sizeof(*mod->trace_bprintk_fmt_start),
+					 &mod->num_trace_bprintk_fmt);
+	/*
+	 * This section contains pointers to allocated objects in the trace
+	 * code and not scanning it leads to false positives.
+	 */
+	kmemleak_scan_area(mod->trace_bprintk_fmt_start,
+			   sizeof(*mod->trace_bprintk_fmt_start) *
+			   mod->num_trace_bprintk_fmt, GFP_KERNEL);
+#endif
 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
 	/* sechdrs[0].sh_size is always zero */
 	mod->ftrace_callsites = section_objs(info, "__mcount_loc",
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index cb6c0d2..671f6c8 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -31,6 +31,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/perf_event.h>
 #include <linux/ftrace_event.h>
+#include <linux/hw_breakpoint.h>
 
 #include <asm/irq_regs.h>
 
@@ -2234,11 +2235,6 @@
 	raw_spin_unlock_irq(&ctx->lock);
 	mutex_unlock(&ctx->mutex);
 
-	mutex_lock(&event->owner->perf_event_mutex);
-	list_del_init(&event->owner_entry);
-	mutex_unlock(&event->owner->perf_event_mutex);
-	put_task_struct(event->owner);
-
 	free_event(event);
 
 	return 0;
@@ -2251,9 +2247,43 @@
 static int perf_release(struct inode *inode, struct file *file)
 {
 	struct perf_event *event = file->private_data;
+	struct task_struct *owner;
 
 	file->private_data = NULL;
 
+	rcu_read_lock();
+	owner = ACCESS_ONCE(event->owner);
+	/*
+	 * Matches the smp_wmb() in perf_event_exit_task(). If we observe
+	 * !owner it means the list deletion is complete and we can indeed
+	 * free this event, otherwise we need to serialize on
+	 * owner->perf_event_mutex.
+	 */
+	smp_read_barrier_depends();
+	if (owner) {
+		/*
+		 * Since delayed_put_task_struct() also drops the last
+		 * task reference we can safely take a new reference
+		 * while holding the rcu_read_lock().
+		 */
+		get_task_struct(owner);
+	}
+	rcu_read_unlock();
+
+	if (owner) {
+		mutex_lock(&owner->perf_event_mutex);
+		/*
+		 * We have to re-check the event->owner field, if it is cleared
+		 * we raced with perf_event_exit_task(), acquiring the mutex
+		 * ensured they're done, and we can proceed with freeing the
+		 * event.
+		 */
+		if (event->owner)
+			list_del_init(&event->owner_entry);
+		mutex_unlock(&owner->perf_event_mutex);
+		put_task_struct(owner);
+	}
+
 	return perf_event_release_kernel(event);
 }
 
@@ -5677,7 +5707,7 @@
 	mutex_unlock(&ctx->mutex);
 
 	event->owner = current;
-	get_task_struct(current);
+
 	mutex_lock(&current->perf_event_mutex);
 	list_add_tail(&event->owner_entry, &current->perf_event_list);
 	mutex_unlock(&current->perf_event_mutex);
@@ -5745,12 +5775,6 @@
 	++ctx->generation;
 	mutex_unlock(&ctx->mutex);
 
-	event->owner = current;
-	get_task_struct(current);
-	mutex_lock(&current->perf_event_mutex);
-	list_add_tail(&event->owner_entry, &current->perf_event_list);
-	mutex_unlock(&current->perf_event_mutex);
-
 	return event;
 
 err_free:
@@ -5901,8 +5925,24 @@
  */
 void perf_event_exit_task(struct task_struct *child)
 {
+	struct perf_event *event, *tmp;
 	int ctxn;
 
+	mutex_lock(&child->perf_event_mutex);
+	list_for_each_entry_safe(event, tmp, &child->perf_event_list,
+				 owner_entry) {
+		list_del_init(&event->owner_entry);
+
+		/*
+		 * Ensure the list deletion is visible before we clear
+		 * the owner, closes a race against perf_release() where
+		 * we need to serialize on the owner->perf_event_mutex.
+		 */
+		smp_wmb();
+		event->owner = NULL;
+	}
+	mutex_unlock(&child->perf_event_mutex);
+
 	for_each_task_context_nr(ctxn)
 		perf_event_exit_task_context(child, ctxn);
 }
@@ -6321,6 +6361,8 @@
 
 void __init perf_event_init(void)
 {
+	int ret;
+
 	perf_event_init_all_cpus();
 	init_srcu_struct(&pmus_srcu);
 	perf_pmu_register(&perf_swevent);
@@ -6328,4 +6370,7 @@
 	perf_pmu_register(&perf_task_clock);
 	perf_tp_register();
 	perf_cpu_notifier(perf_cpu_notify);
+
+	ret = init_hw_breakpoint();
+	WARN(ret, "hw_breakpoint initialization failed with: %d", ret);
 }
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 6842eeb..05bb717 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -37,13 +37,13 @@
 	if (pid == 0)
 		return 0;
 
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 	p = find_task_by_vpid(pid);
 	if (!p || !(CPUCLOCK_PERTHREAD(which_clock) ?
-		   same_thread_group(p, current) : thread_group_leader(p))) {
+		   same_thread_group(p, current) : has_group_leader_pid(p))) {
 		error = -EINVAL;
 	}
-	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 
 	return error;
 }
@@ -390,7 +390,7 @@
 
 	INIT_LIST_HEAD(&new_timer->it.cpu.entry);
 
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 	if (CPUCLOCK_PERTHREAD(new_timer->it_clock)) {
 		if (pid == 0) {
 			p = current;
@@ -404,7 +404,7 @@
 			p = current->group_leader;
 		} else {
 			p = find_task_by_vpid(pid);
-			if (p && !thread_group_leader(p))
+			if (p && !has_group_leader_pid(p))
 				p = NULL;
 		}
 	}
@@ -414,7 +414,7 @@
 	} else {
 		ret = -EINVAL;
 	}
-	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 
 	return ret;
 }
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 52ab113..00ebd76 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1758,10 +1758,6 @@
 	set_task_cpu(p, this_cpu);
 	activate_task(this_rq, p, 0);
 	check_preempt_curr(this_rq, p, 0);
-
-	/* re-arm NEWIDLE balancing when moving tasks */
-	src_rq->avg_idle = this_rq->avg_idle = 2*sysctl_sched_migration_cost;
-	this_rq->idle_stamp = 0;
 }
 
 /*
@@ -3219,8 +3215,10 @@
 		interval = msecs_to_jiffies(sd->balance_interval);
 		if (time_after(next_balance, sd->last_balance + interval))
 			next_balance = sd->last_balance + interval;
-		if (pulled_task)
+		if (pulled_task) {
+			this_rq->idle_stamp = 0;
 			break;
+		}
 	}
 
 	raw_spin_lock(&this_rq->lock);
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 0420841..c380612 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1283,6 +1283,8 @@
 	__ftrace_trace_stack(global_trace.buffer, flags, 3, preempt_count());
 }
 
+static DEFINE_PER_CPU(int, user_stack_count);
+
 void
 ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags, int pc)
 {
@@ -1301,6 +1303,18 @@
 	if (unlikely(in_nmi()))
 		return;
 
+	/*
+	 * prevent recursion, since the user stack tracing may
+	 * trigger other kernel events.
+	 */
+	preempt_disable();
+	if (__this_cpu_read(user_stack_count))
+		goto out;
+
+	__this_cpu_inc(user_stack_count);
+
+
+
 	event = trace_buffer_lock_reserve(buffer, TRACE_USER_STACK,
 					  sizeof(*entry), flags, pc);
 	if (!event)
@@ -1318,6 +1332,11 @@
 	save_stack_trace_user(&trace);
 	if (!filter_check_discard(call, entry, buffer, event))
 		ring_buffer_unlock_commit(buffer, event);
+
+	__this_cpu_dec(user_stack_count);
+
+ out:
+	preempt_enable();
 }
 
 #ifdef UNUSED
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 2efa8ea..7a22b41 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -61,7 +61,14 @@
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
 /* Turned on only when memory cgroup is enabled && really_do_swap_account = 1 */
 int do_swap_account __read_mostly;
-static int really_do_swap_account __initdata = 1; /* for remember boot option*/
+
+/* for remember boot option*/
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED
+static int really_do_swap_account __initdata = 1;
+#else
+static int really_do_swap_account __initdata = 0;
+#endif
+
 #else
 #define do_swap_account		(0)
 #endif
@@ -278,13 +285,14 @@
 
 /* "mc" and its members are protected by cgroup_mutex */
 static struct move_charge_struct {
-	spinlock_t	  lock; /* for from, to, moving_task */
+	spinlock_t	  lock; /* for from, to */
 	struct mem_cgroup *from;
 	struct mem_cgroup *to;
 	unsigned long precharge;
 	unsigned long moved_charge;
 	unsigned long moved_swap;
 	struct task_struct *moving_task;	/* a task moving charges */
+	struct mm_struct *mm;
 	wait_queue_head_t waitq;		/* a waitq for other context */
 } mc = {
 	.lock = __SPIN_LOCK_UNLOCKED(mc.lock),
@@ -2152,7 +2160,7 @@
 {
 	VM_BUG_ON(from == to);
 	VM_BUG_ON(PageLRU(pc->page));
-	VM_BUG_ON(!PageCgroupLocked(pc));
+	VM_BUG_ON(!page_is_cgroup_locked(pc));
 	VM_BUG_ON(!PageCgroupUsed(pc));
 	VM_BUG_ON(pc->mem_cgroup != from);
 
@@ -4631,7 +4639,7 @@
 	unsigned long precharge;
 	struct vm_area_struct *vma;
 
-	down_read(&mm->mmap_sem);
+	/* We've already held the mmap_sem */
 	for (vma = mm->mmap; vma; vma = vma->vm_next) {
 		struct mm_walk mem_cgroup_count_precharge_walk = {
 			.pmd_entry = mem_cgroup_count_precharge_pte_range,
@@ -4643,7 +4651,6 @@
 		walk_page_range(vma->vm_start, vma->vm_end,
 					&mem_cgroup_count_precharge_walk);
 	}
-	up_read(&mm->mmap_sem);
 
 	precharge = mc.precharge;
 	mc.precharge = 0;
@@ -4694,11 +4701,16 @@
 
 		mc.moved_swap = 0;
 	}
+	if (mc.mm) {
+		up_read(&mc.mm->mmap_sem);
+		mmput(mc.mm);
+	}
 	spin_lock(&mc.lock);
 	mc.from = NULL;
 	mc.to = NULL;
-	mc.moving_task = NULL;
 	spin_unlock(&mc.lock);
+	mc.moving_task = NULL;
+	mc.mm = NULL;
 	mem_cgroup_end_move(from);
 	memcg_oom_recover(from);
 	memcg_oom_recover(to);
@@ -4724,12 +4736,21 @@
 			return 0;
 		/* We move charges only when we move a owner of the mm */
 		if (mm->owner == p) {
+			/*
+			 * We do all the move charge works under one mmap_sem to
+			 * avoid deadlock with down_write(&mmap_sem)
+			 * -> try_charge() -> if (mc.moving_task) -> sleep.
+			 */
+			down_read(&mm->mmap_sem);
+
 			VM_BUG_ON(mc.from);
 			VM_BUG_ON(mc.to);
 			VM_BUG_ON(mc.precharge);
 			VM_BUG_ON(mc.moved_charge);
 			VM_BUG_ON(mc.moved_swap);
 			VM_BUG_ON(mc.moving_task);
+			VM_BUG_ON(mc.mm);
+
 			mem_cgroup_start_move(from);
 			spin_lock(&mc.lock);
 			mc.from = from;
@@ -4737,14 +4758,16 @@
 			mc.precharge = 0;
 			mc.moved_charge = 0;
 			mc.moved_swap = 0;
-			mc.moving_task = current;
 			spin_unlock(&mc.lock);
+			mc.moving_task = current;
+			mc.mm = mm;
 
 			ret = mem_cgroup_precharge_mc(mm);
 			if (ret)
 				mem_cgroup_clear_mc();
-		}
-		mmput(mm);
+			/* We call up_read() and mmput() in clear_mc(). */
+		} else
+			mmput(mm);
 	}
 	return ret;
 }
@@ -4832,7 +4855,7 @@
 	struct vm_area_struct *vma;
 
 	lru_add_drain_all();
-	down_read(&mm->mmap_sem);
+	/* We've already held the mmap_sem */
 	for (vma = mm->mmap; vma; vma = vma->vm_next) {
 		int ret;
 		struct mm_walk mem_cgroup_move_charge_walk = {
@@ -4851,7 +4874,6 @@
 			 */
 			break;
 	}
-	up_read(&mm->mmap_sem);
 }
 
 static void mem_cgroup_move_task(struct cgroup_subsys *ss,
@@ -4860,17 +4882,11 @@
 				struct task_struct *p,
 				bool threadgroup)
 {
-	struct mm_struct *mm;
-
-	if (!mc.to)
+	if (!mc.mm)
 		/* no need to move charge */
 		return;
 
-	mm = get_task_mm(p);
-	if (mm) {
-		mem_cgroup_move_charge(mm);
-		mmput(mm);
-	}
+	mem_cgroup_move_charge(mc.mm);
 	mem_cgroup_clear_mc();
 }
 #else	/* !CONFIG_MMU */
@@ -4911,10 +4927,20 @@
 };
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
+static int __init enable_swap_account(char *s)
+{
+	/* consider enabled if no parameter or 1 is given */
+	if (!s || !strcmp(s, "1"))
+		really_do_swap_account = 1;
+	else if (!strcmp(s, "0"))
+		really_do_swap_account = 0;
+	return 1;
+}
+__setup("swapaccount", enable_swap_account);
 
 static int __init disable_swap_account(char *s)
 {
-	really_do_swap_account = 0;
+	enable_swap_account("0");
 	return 1;
 }
 __setup("noswapaccount", disable_swap_account);
diff --git a/mm/nommu.c b/mm/nommu.c
index 3613517..27a9ac5 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1717,6 +1717,7 @@
 		mm->mmap = vma->vm_next;
 		delete_vma_from_mm(vma);
 		delete_vma(mm, vma);
+		cond_resched();
 	}
 
 	kleave("");
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 07a6544..e409270 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3008,14 +3008,6 @@
 		build_zonelist_cache(pgdat);
 	}
 
-#ifdef CONFIG_MEMORY_HOTPLUG
-	/* Setup real pagesets for the new zone */
-	if (data) {
-		struct zone *zone = data;
-		setup_zone_pageset(zone);
-	}
-#endif
-
 	/*
 	 * Initialize the boot_pagesets that are going to be used
 	 * for bootstrapping processors. The real pagesets for
@@ -3064,7 +3056,11 @@
 	} else {
 		/* we have to stop all cpus to guarantee there is no user
 		   of zonelist */
-		stop_machine(__build_all_zonelists, data, NULL);
+#ifdef CONFIG_MEMORY_HOTPLUG
+		if (data)
+			setup_zone_pageset((struct zone *)data);
+#endif
+		stop_machine(__build_all_zonelists, NULL, NULL);
 		/* cpuset refresh routine should be here */
 	}
 	vm_total_pages = nr_free_pagecache_pages();
diff --git a/mm/pagewalk.c b/mm/pagewalk.c
index 8b1a2ce..38cc58b 100644
--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -139,7 +139,6 @@
 	pgd_t *pgd;
 	unsigned long next;
 	int err = 0;
-	struct vm_area_struct *vma;
 
 	if (addr >= end)
 		return err;
@@ -149,15 +148,17 @@
 
 	pgd = pgd_offset(walk->mm, addr);
 	do {
+		struct vm_area_struct *uninitialized_var(vma);
+
 		next = pgd_addr_end(addr, end);
 
+#ifdef CONFIG_HUGETLB_PAGE
 		/*
 		 * handle hugetlb vma individually because pagetable walk for
 		 * the hugetlb page is dependent on the architecture and
 		 * we can't handled it in the same manner as non-huge pages.
 		 */
 		vma = find_vma(walk->mm, addr);
-#ifdef CONFIG_HUGETLB_PAGE
 		if (vma && is_vm_hugetlb_page(vma)) {
 			if (vma->vm_end < next)
 				next = vma->vm_end;
diff --git a/net/ceph/buffer.c b/net/ceph/buffer.c
index 53d8abf..bf3e6a1 100644
--- a/net/ceph/buffer.c
+++ b/net/ceph/buffer.c
@@ -19,7 +19,7 @@
 	if (b->vec.iov_base) {
 		b->is_vmalloc = false;
 	} else {
-		b->vec.iov_base = __vmalloc(len, gfp, PAGE_KERNEL);
+		b->vec.iov_base = __vmalloc(len, gfp | __GFP_HIGHMEM, PAGE_KERNEL);
 		if (!b->vec.iov_base) {
 			kfree(b);
 			return NULL;
diff --git a/net/core/request_sock.c b/net/core/request_sock.c
index 7552495..fceeb37 100644
--- a/net/core/request_sock.c
+++ b/net/core/request_sock.c
@@ -45,9 +45,7 @@
 	nr_table_entries = roundup_pow_of_two(nr_table_entries + 1);
 	lopt_size += nr_table_entries * sizeof(struct request_sock *);
 	if (lopt_size > PAGE_SIZE)
-		lopt = __vmalloc(lopt_size,
-			GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
-			PAGE_KERNEL);
+		lopt = vzalloc(lopt_size);
 	else
 		lopt = kzalloc(lopt_size, GFP_KERNEL);
 	if (lopt == NULL)
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 200eb53..0f28034 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -365,7 +365,7 @@
 	if (size <= PAGE_SIZE)
 		return kzalloc(size, GFP_KERNEL);
 	else
-		return __vmalloc(size, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
+		return vzalloc(size);
 }
 
 static void __tnode_vfree(struct work_struct *arg)
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 2fc35b3..23cc8e1 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2758,13 +2758,13 @@
 			ifa->state = INET6_IFADDR_STATE_DEAD;
 			spin_unlock_bh(&ifa->state_lock);
 
-			if (state == INET6_IFADDR_STATE_DEAD) {
-				in6_ifa_put(ifa);
-			} else {
+			if (state != INET6_IFADDR_STATE_DEAD) {
 				__ipv6_ifa_notify(RTM_DELADDR, ifa);
 				atomic_notifier_call_chain(&inet6addr_chain,
 							   NETDEV_DOWN, ifa);
 			}
+
+			in6_ifa_put(ifa);
 			write_lock_bh(&idev->lock);
 		}
 	}
diff --git a/net/xfrm/xfrm_hash.c b/net/xfrm/xfrm_hash.c
index a2023ec..1e98bc0 100644
--- a/net/xfrm/xfrm_hash.c
+++ b/net/xfrm/xfrm_hash.c
@@ -19,7 +19,7 @@
 	if (sz <= PAGE_SIZE)
 		n = kzalloc(sz, GFP_KERNEL);
 	else if (hashdist)
-		n = __vmalloc(sz, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
+		n = vzalloc(sz);
 	else
 		n = (struct hlist_head *)
 			__get_free_pages(GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO,
diff --git a/scripts/gfp-translate b/scripts/gfp-translate
index d81b968..c9230e1 100644
--- a/scripts/gfp-translate
+++ b/scripts/gfp-translate
@@ -63,7 +63,12 @@
 
 # Extract GFP flags from the kernel source
 TMPFILE=`mktemp -t gfptranslate-XXXXXX` || exit 1
-grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE
+grep -q ___GFP $SOURCE/include/linux/gfp.h
+if [ $? -eq 0 ]; then
+	grep "^#define ___GFP" $SOURCE/include/linux/gfp.h | sed -e 's/u$//' | grep -v GFP_BITS > $TMPFILE
+else
+	grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE
+fi
 
 # Parse the flags
 IFS="
diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c
index f2f41c8..6e24091 100644
--- a/sound/atmel/abdac.c
+++ b/sound/atmel/abdac.c
@@ -420,9 +420,9 @@
 		return PTR_ERR(pclk);
 	}
 	sample_clk = clk_get(&pdev->dev, "sample_clk");
-	if (IS_ERR(pclk)) {
+	if (IS_ERR(sample_clk)) {
 		dev_dbg(&pdev->dev, "no sample clock\n");
-		retval = PTR_ERR(pclk);
+		retval = PTR_ERR(sample_clk);
 		goto out_put_pclk;
 	}
 	clk_enable(pclk);
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index a1707cc..b75db8e 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -223,7 +223,7 @@
 	entry->jiffies = jiffies;
 	entry->pos = pos;
 	entry->period_size = runtime->period_size;
-	entry->buffer_size = runtime->buffer_size;;
+	entry->buffer_size = runtime->buffer_size;
 	entry->old_hw_ptr = runtime->status->hw_ptr;
 	entry->hw_ptr_base = runtime->hw_ptr_base;
 	log->idx = (log->idx + 1) % XRUN_LOG_CNT;
diff --git a/sound/oss/dev_table.c b/sound/oss/dev_table.c
index 727bdb9..d8cf3e5 100644
--- a/sound/oss/dev_table.c
+++ b/sound/oss/dev_table.c
@@ -71,7 +71,7 @@
 	if (sound_nblocks >= MAX_MEM_BLOCKS)
 		sound_nblocks = MAX_MEM_BLOCKS - 1;
 
-	op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_operations)));
+	op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct audio_operations)));
 	sound_nblocks++;
 	if (sound_nblocks >= MAX_MEM_BLOCKS)
 		sound_nblocks = MAX_MEM_BLOCKS - 1;
@@ -81,7 +81,6 @@
 		sound_unload_audiodev(num);
 		return -(ENOMEM);
 	}
-	memset((char *) op, 0, sizeof(struct audio_operations));
 	init_waitqueue_head(&op->in_sleeper);
 	init_waitqueue_head(&op->out_sleeper);	
 	init_waitqueue_head(&op->poll_sleeper);
@@ -128,7 +127,7 @@
 	/* FIXME: This leaks a mixer_operations struct every time its called
 	   until you unload sound! */
 	   
-	op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct mixer_operations)));
+	op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct mixer_operations)));
 	sound_nblocks++;
 	if (sound_nblocks >= MAX_MEM_BLOCKS)
 		sound_nblocks = MAX_MEM_BLOCKS - 1;
@@ -137,7 +136,6 @@
 		printk(KERN_ERR "Sound: Can't allocate mixer driver for (%s)\n", name);
 		return -ENOMEM;
 	}
-	memset((char *) op, 0, sizeof(struct mixer_operations));
 	memcpy((char *) op, (char *) driver, driver_size);
 
 	strlcpy(op->name, name, sizeof(op->name));
diff --git a/sound/oss/midibuf.c b/sound/oss/midibuf.c
index 782b3b8..ceedb1e 100644
--- a/sound/oss/midibuf.c
+++ b/sound/oss/midibuf.c
@@ -178,7 +178,7 @@
 		return err;
 
 	parms[dev].prech_timeout = MAX_SCHEDULE_TIMEOUT;
-	midi_in_buf[dev] = (struct midi_buf *) vmalloc(sizeof(struct midi_buf));
+	midi_in_buf[dev] = vmalloc(sizeof(struct midi_buf));
 
 	if (midi_in_buf[dev] == NULL)
 	{
@@ -188,7 +188,7 @@
 	}
 	midi_in_buf[dev]->len = midi_in_buf[dev]->head = midi_in_buf[dev]->tail = 0;
 
-	midi_out_buf[dev] = (struct midi_buf *) vmalloc(sizeof(struct midi_buf));
+	midi_out_buf[dev] = vmalloc(sizeof(struct midi_buf));
 
 	if (midi_out_buf[dev] == NULL)
 	{
diff --git a/sound/oss/pss.c b/sound/oss/pss.c
index e19dd5d..9b800ce 100644
--- a/sound/oss/pss.c
+++ b/sound/oss/pss.c
@@ -859,7 +859,7 @@
 			return 0;
 
 		case SNDCTL_COPR_LOAD:
-			buf = (copr_buffer *) vmalloc(sizeof(copr_buffer));
+			buf = vmalloc(sizeof(copr_buffer));
 			if (buf == NULL)
 				return -ENOSPC;
 			if (copy_from_user(buf, arg, sizeof(copr_buffer))) {
@@ -871,7 +871,7 @@
 			return err;
 		
 		case SNDCTL_COPR_SENDMSG:
-			mbuf = (copr_msg *)vmalloc(sizeof(copr_msg));
+			mbuf = vmalloc(sizeof(copr_msg));
 			if (mbuf == NULL)
 				return -ENOSPC;
 			if (copy_from_user(mbuf, arg, sizeof(copr_msg))) {
@@ -895,7 +895,7 @@
 
 		case SNDCTL_COPR_RCVMSG:
 			err = 0;
-			mbuf = (copr_msg *)vmalloc(sizeof(copr_msg));
+			mbuf = vmalloc(sizeof(copr_msg));
 			if (mbuf == NULL)
 				return -ENOSPC;
 			data = (unsigned short *)mbuf->data;
diff --git a/sound/oss/sequencer.c b/sound/oss/sequencer.c
index e85789e..5ea1098 100644
--- a/sound/oss/sequencer.c
+++ b/sound/oss/sequencer.c
@@ -1646,13 +1646,13 @@
 {
 	if (sequencer_ok)
 		return;
-	queue = (unsigned char *)vmalloc(SEQ_MAX_QUEUE * EV_SZ);
+	queue = vmalloc(SEQ_MAX_QUEUE * EV_SZ);
 	if (queue == NULL)
 	{
 		printk(KERN_ERR "sequencer: Can't allocate memory for sequencer output queue\n");
 		return;
 	}
-	iqueue = (unsigned char *)vmalloc(SEQ_MAX_QUEUE * IEV_SZ);
+	iqueue = vmalloc(SEQ_MAX_QUEUE * IEV_SZ);
 	if (iqueue == NULL)
 	{
 		printk(KERN_ERR "sequencer: Can't allocate memory for sequencer input queue\n");
diff --git a/sound/pci/asihpi/hpioctl.c b/sound/pci/asihpi/hpioctl.c
index 62895a7..22dbd91 100644
--- a/sound/pci/asihpi/hpioctl.c
+++ b/sound/pci/asihpi/hpioctl.c
@@ -435,7 +435,7 @@
 	struct hpi_message hm;
 	struct hpi_response hr;
 	struct hpi_adapter *pa;
-	pa = (struct hpi_adapter *)pci_get_drvdata(pci_dev);
+	pa = pci_get_drvdata(pci_dev);
 
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM,
 		HPI_SUBSYS_DELETE_ADAPTER);
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 4679ed8..2f3cacb 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -1129,10 +1129,11 @@
 
 		count_areas = size/2;
 		addr_area2 = addr+count_areas;
-		count_areas--; /* max. index */
 		snd_azf3328_dbgcodec("setdma: buffers %08lx[%u] / %08lx[%u]\n",
 				addr, count_areas, addr_area2, count_areas);
 
+		count_areas--; /* max. index */
+
 		/* build combined I/O buffer length word */
 		lengths = (count_areas << 16) | (count_areas);
 		spin_lock_irqsave(&chip->reg_lock, flags);
@@ -1740,11 +1741,15 @@
 	.rate_max =		AZF_FREQ_66200,
 	.channels_min =		1,
 	.channels_max =		2,
-	.buffer_bytes_max =	65536,
-	.period_bytes_min =	64,
-	.period_bytes_max =	65536,
-	.periods_min =		1,
-	.periods_max =		1024,
+	.buffer_bytes_max =	(64*1024),
+	.period_bytes_min =	1024,
+	.period_bytes_max =	(32*1024),
+	/* We simply have two DMA areas (instead of a list of descriptors
+	   such as other cards); I believe that this is a fixed hardware
+	   attribute and there isn't much driver magic to be done to expand it.
+	   Thus indicate that we have at least and at most 2 periods. */
+	.periods_min =		2,
+	.periods_max =		2,
 	/* FIXME: maybe that card actually has a FIFO?
 	 * Hmm, it seems newer revisions do have one, but we still don't know
 	 * its size... */
@@ -1980,8 +1985,13 @@
 	chip = snd_timer_chip(timer);
 	spin_lock_irqsave(&chip->reg_lock, flags);
 	/* disable timer countdown and interrupt */
-	/* FIXME: should we write TIMER_IRQ_ACK here? */
-	snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0);
+	/* Hmm, should we write TIMER_IRQ_ACK here?
+	   YES indeed, otherwise a rogue timer operation - which prompts
+	   ALSA(?) to call repeated stop() in vain, but NOT start() -
+	   will never end (value 0x03 is kept shown in control byte).
+	   Simply manually poking 0x04 _once_ immediately successfully stops
+	   the hardware/ALSA interrupt activity. */
+	snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x04);
 	spin_unlock_irqrestore(&chip->reg_lock, flags);
 	snd_azf3328_dbgcallleave();
 	return 0;
diff --git a/sound/pci/ctxfi/ctpcm.c b/sound/pci/ctxfi/ctpcm.c
index 85ab43e..457d211 100644
--- a/sound/pci/ctxfi/ctpcm.c
+++ b/sound/pci/ctxfi/ctpcm.c
@@ -129,8 +129,6 @@
 
 	apcm->substream = substream;
 	apcm->interrupt = ct_atc_pcm_interrupt;
-	runtime->private_data = apcm;
-	runtime->private_free = ct_atc_pcm_free_substream;
 	if (IEC958 == substream->pcm->device) {
 		runtime->hw = ct_spdif_passthru_playback_hw;
 		atc->spdif_out_passthru(atc, 1);
@@ -155,8 +153,12 @@
 	}
 
 	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
-	if (!apcm->timer)
+	if (!apcm->timer) {
+		kfree(apcm);
 		return -ENOMEM;
+	}
+	runtime->private_data = apcm;
+	runtime->private_free = ct_atc_pcm_free_substream;
 
 	return 0;
 }
@@ -278,8 +280,6 @@
 	apcm->started = 0;
 	apcm->substream = substream;
 	apcm->interrupt = ct_atc_pcm_interrupt;
-	runtime->private_data = apcm;
-	runtime->private_free = ct_atc_pcm_free_substream;
 	runtime->hw = ct_pcm_capture_hw;
 	runtime->hw.rate_max = atc->rsr * atc->msr;
 
@@ -298,8 +298,12 @@
 	}
 
 	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
-	if (!apcm->timer)
+	if (!apcm->timer) {
+		kfree(apcm);
 		return -ENOMEM;
+	}
+	runtime->private_data = apcm;
+	runtime->private_free = ct_atc_pcm_free_substream;
 
 	return 0;
 }
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 6361f75..846d1ea 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3100,6 +3100,7 @@
 	SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTRO),
 	SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP),
+	SND_PCI_QUIRK(0x1043, 0x13f3, "Asus A52J", CXT5066_HP_LAPTOP),
 	SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
 	SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
@@ -3110,6 +3111,7 @@
 	SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21b3, "Thinkpad Edge 13 (197)", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21b4, "Thinkpad Edge", CXT5066_IDEAPAD),
+	SND_PCI_QUIRK(0x17aa, 0x21c8, "Thinkpad Edge 11", CXT5066_IDEAPAD),
  	SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD),
  	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G series", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x390a, "Lenovo S10-3t", CXT5066_IDEAPAD),
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 5f00589..0ac6aed 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -14623,7 +14623,10 @@
 /* different alc269-variants */
 enum {
 	ALC269_TYPE_NORMAL,
+	ALC269_TYPE_ALC258,
 	ALC269_TYPE_ALC259,
+	ALC269_TYPE_ALC269VB,
+	ALC269_TYPE_ALC270,
 	ALC269_TYPE_ALC271X,
 };
 
@@ -15023,7 +15026,7 @@
 static int patch_alc269(struct hda_codec *codec)
 {
 	struct alc_spec *spec;
-	int board_config;
+	int board_config, coef;
 	int err;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
@@ -15034,14 +15037,23 @@
 
 	alc_auto_parse_customize_define(codec);
 
-	if ((alc_read_coef_idx(codec, 0) & 0x00f0) == 0x0010){
+	coef = alc_read_coef_idx(codec, 0);
+	if ((coef & 0x00f0) == 0x0010) {
 		if (codec->bus->pci->subsystem_vendor == 0x1025 &&
 		    spec->cdefine.platform_type == 1) {
 			alc_codec_rename(codec, "ALC271X");
 			spec->codec_variant = ALC269_TYPE_ALC271X;
-		} else {
+		} else if ((coef & 0xf000) == 0x1000) {
+			spec->codec_variant = ALC269_TYPE_ALC270;
+		} else if ((coef & 0xf000) == 0x2000) {
 			alc_codec_rename(codec, "ALC259");
 			spec->codec_variant = ALC269_TYPE_ALC259;
+		} else if ((coef & 0xf000) == 0x3000) {
+			alc_codec_rename(codec, "ALC258");
+			spec->codec_variant = ALC269_TYPE_ALC258;
+		} else {
+			alc_codec_rename(codec, "ALC269VB");
+			spec->codec_variant = ALC269_TYPE_ALC269VB;
 		}
 	} else
 		alc_fix_pll_init(codec, 0x20, 0x04, 15);
@@ -15104,7 +15116,7 @@
 	spec->stream_digital_capture = &alc269_pcm_digital_capture;
 
 	if (!spec->adc_nids) { /* wasn't filled automatically? use default */
-		if (spec->codec_variant != ALC269_TYPE_NORMAL) {
+		if (spec->codec_variant == ALC269_TYPE_NORMAL) {
 			spec->adc_nids = alc269_adc_nids;
 			spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids);
 			spec->capsrc_nids = alc269_capsrc_nids;
@@ -19298,6 +19310,7 @@
 
 static struct snd_pci_quirk alc662_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
+	SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
 	{}
@@ -19419,7 +19432,10 @@
 {
 	if ((alc_read_coef_idx(codec, 0) & 0x00f0)==0x0030){
 		kfree(codec->chip_name);
-		codec->chip_name = kstrdup("ALC888-VD", GFP_KERNEL);
+		if (codec->vendor_id == 0x10ec0887)
+			codec->chip_name = kstrdup("ALC887-VD", GFP_KERNEL);
+		else
+			codec->chip_name = kstrdup("ALC888-VD", GFP_KERNEL);
 		if (!codec->chip_name) {
 			alc_free(codec);
 			return -ENOMEM;
@@ -19909,7 +19925,7 @@
 	{ .id = 0x10ec0885, .rev = 0x100103, .name = "ALC889A",
 	  .patch = patch_alc882 },
 	{ .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
-	{ .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc882 },
+	{ .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc888 },
 	{ .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200",
 	  .patch = patch_alc882 },
 	{ .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc888 },
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 93fa59c..5c71080 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -389,6 +389,11 @@
 	0x11, 0x20, 0
 };
 
+#define STAC92HD87B_NUM_DMICS	 1
+static hda_nid_t stac92hd87b_dmic_nids[STAC92HD87B_NUM_DMICS + 1] = {
+	0x11, 0
+};
+
 #define STAC92HD83XXX_NUM_CAPS	2
 static unsigned long stac92hd83xxx_capvols[] = {
 	HDA_COMPOSE_AMP_VAL(0x17, 3, 0, HDA_OUTPUT),
@@ -3486,10 +3491,8 @@
 				return err;
 		}
 
-		if (snd_hda_get_bool_hint(codec, "separate_dmux") != 1) {
+		if (snd_hda_get_bool_hint(codec, "separate_dmux") != 1)
 			snd_hda_add_imux_item(imux, label, index, NULL);
-			spec->num_analog_muxes++;
-		}
 	}
 
 	return 0;
@@ -5452,12 +5455,17 @@
 				stac92hd83xxx_brd_tbl[spec->board_config]);
 
 	switch (codec->vendor_id) {
+	case 0x111d76d1:
+	case 0x111d76d9:
+		spec->dmic_nids = stac92hd87b_dmic_nids;
+		spec->num_dmics = stac92xx_connected_ports(codec,
+				stac92hd87b_dmic_nids,
+				STAC92HD87B_NUM_DMICS);
+		/* Fall through */
 	case 0x111d7666:
 	case 0x111d7667:
 	case 0x111d7668:
 	case 0x111d7669:
-	case 0x111d76d1:
-	case 0x111d76d9:
 		spec->num_pins = ARRAY_SIZE(stac92hd88xxx_pin_nids);
 		spec->pin_nids = stac92hd88xxx_pin_nids;
 		spec->mono_nid = 0;
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 400f9eb..629a549 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -1866,6 +1866,12 @@
 	},
 	{
 		.subvendor = 0x1028,
+		.subdevice = 0x0182,
+		.name = "Dell Latitude D610",	/* STAC9750/51 */
+		.type = AC97_TUNE_HP_ONLY
+	},
+	{
+		.subvendor = 0x1028,
 		.subdevice = 0x0186,
 		.name = "Dell Latitude D810", /* cf. Malone #41015 */
 		.type = AC97_TUNE_HP_MUTE_LED
diff --git a/sound/pci/mixart/mixart_hwdep.h b/sound/pci/mixart/mixart_hwdep.h
index a46f508..812e288 100644
--- a/sound/pci/mixart/mixart_hwdep.h
+++ b/sound/pci/mixart/mixart_hwdep.h
@@ -25,11 +25,21 @@
 
 #include <sound/hwdep.h>
 
+#ifndef readl_be
 #define readl_be(x) be32_to_cpu(__raw_readl(x))
-#define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr)
+#endif
 
+#ifndef writel_be
+#define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr)
+#endif
+
+#ifndef readl_le
 #define readl_le(x) le32_to_cpu(__raw_readl(x))
+#endif
+
+#ifndef writel_le
 #define writel_le(data,addr) __raw_writel(cpu_to_le32(data),addr)
+#endif
 
 #define MIXART_MEM(mgr,x)	((mgr)->mem[0].virt + (x))
 #define MIXART_REG(mgr,x)	((mgr)->mem[1].virt + (x))
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 8508117..b47cfd4 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -1228,10 +1228,8 @@
 					       chip->rsrc[i].start + 1,
 					       rnames[i]) == NULL) {
 				printk(KERN_ERR "snd: can't request rsrc "
-				       " %d (%s: 0x%016llx:%016llx)\n",
-				       i, rnames[i],
-				       (unsigned long long)chip->rsrc[i].start,
-				       (unsigned long long)chip->rsrc[i].end);
+				       " %d (%s: %pR)\n",
+				       i, rnames[i], &chip->rsrc[i]);
 				err = -ENODEV;
 				goto __error;
 			}
@@ -1256,10 +1254,8 @@
 					       chip->rsrc[i].start + 1,
 					       rnames[i]) == NULL) {
 				printk(KERN_ERR "snd: can't request rsrc "
-				       " %d (%s: 0x%016llx:%016llx)\n",
-				       i, rnames[i],
-				       (unsigned long long)chip->rsrc[i].start,
-				       (unsigned long long)chip->rsrc[i].end);
+				       " %d (%s: %pR)\n",
+				       i, rnames[i], &chip->rsrc[i]);
 				err = -ENODEV;
 				goto __error;
 			}
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index e720d5e..bee3c94 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -16,7 +16,8 @@
 
 config SND_AT91_SOC_SAM9G20_WM8731
 	tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
-	depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC
+	depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC && \
+                   AT91_PROGRAMMABLE_CLOCKS
 	select SND_ATMEL_SOC_SSC
 	select SND_SOC_WM8731
 	help
@@ -25,7 +26,7 @@
 
 config SND_AT32_SOC_PLAYPAQ
         tristate "SoC Audio support for PlayPaq with WM8510"
-        depends on SND_ATMEL_SOC && BOARD_PLAYPAQ
+        depends on SND_ATMEL_SOC && BOARD_PLAYPAQ && AT91_PROGRAMMABLE_CLOCKS
         select SND_ATMEL_SOC_SSC
         select SND_SOC_WM8510
         help
diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c
index bc22ee9..470cb93 100644
--- a/sound/soc/codecs/max98088.c
+++ b/sound/soc/codecs/max98088.c
@@ -28,6 +28,11 @@
 #include <sound/max98088.h>
 #include "max98088.h"
 
+enum max98088_type {
+       MAX98088,
+       MAX98089,
+};
+
 struct max98088_cdata {
        unsigned int rate;
        unsigned int fmt;
@@ -36,6 +41,7 @@
 
 struct max98088_priv {
        u8 reg_cache[M98088_REG_CNT];
+       enum max98088_type devtype;
        void *control_data;
        struct max98088_pdata *pdata;
        unsigned int sysclk;
@@ -2040,6 +2046,8 @@
        if (max98088 == NULL)
                return -ENOMEM;
 
+       max98088->devtype = id->driver_data;
+
        i2c_set_clientdata(i2c, max98088);
        max98088->control_data = i2c;
        max98088->pdata = i2c->dev.platform_data;
@@ -2059,7 +2067,8 @@
 }
 
 static const struct i2c_device_id max98088_i2c_id[] = {
-       { "max98088", 0 },
+       { "max98088", MAX98088 },
+       { "max98089", MAX98089 },
        { }
 };
 MODULE_DEVICE_TABLE(i2c, max98088_i2c_id);
diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c
index 7540a50..464f0cf 100644
--- a/sound/soc/codecs/uda134x.c
+++ b/sound/soc/codecs/uda134x.c
@@ -597,6 +597,7 @@
 	.resume =       uda134x_soc_resume,
 	.reg_cache_size = sizeof(uda134x_reg),
 	.reg_word_size = sizeof(u8),
+	.reg_cache_default = uda134x_reg,
 	.reg_cache_step = 1,
 	.read = uda134x_read_reg_cache,
 	.write = uda134x_write,
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index f4f1fba..7611add 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -831,7 +831,7 @@
 	}
 
 	/* MCLK direction */
-	if (dir == WM8350_MCLK_DIR_OUT)
+	if (dir == SND_SOC_CLOCK_OUT)
 		wm8350_set_bits(wm8350, WM8350_CLOCK_CONTROL_2,
 				WM8350_MCLK_DIR);
 	else
@@ -1586,6 +1586,13 @@
 	wm8350_set_bits(wm8350, WM8350_ROUT2_VOLUME,
 			WM8350_OUT2_VU | WM8350_OUT2R_MUTE);
 
+	/* Make sure AIF tristating is disabled by default */
+	wm8350_clear_bits(wm8350, WM8350_AI_FORMATING, WM8350_AIF_TRI);
+
+	/* Make sure we've got a sane companding setup too */
+	wm8350_clear_bits(wm8350, WM8350_ADC_DAC_COMP,
+			  WM8350_DAC_COMP | WM8350_LOOPBACK);
+
 	/* Make sure jack detect is disabled to start off with */
 	wm8350_clear_bits(wm8350, WM8350_JACK_DETECT,
 			  WM8350_JDL_ENA | WM8350_JDR_ENA);
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index 04182c4..0132a27 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -34,7 +34,6 @@
 /* codec private data */
 struct wm8776_priv {
 	enum snd_soc_control_type control_type;
-	u16 reg_cache[WM8776_CACHEREGNUM];
 	int sysclk[2];
 };
 
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 894d0cd..e809274 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -3500,8 +3500,11 @@
 {
 	struct wm8962_priv *wm8962 = dev_get_drvdata(dev);
 	long int time;
+	int ret;
 
-	strict_strtol(buf, 10, &time);
+	ret = strict_strtol(buf, 10, &time);
+	if (ret != 0)
+		return ret;
 
 	input_event(wm8962->beep, EV_SND, SND_TONE, time);
 
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 0db59c3..830dfdd66 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -3903,6 +3903,8 @@
 		return -ENOMEM;
 	snd_soc_codec_set_drvdata(codec, wm8994);
 
+	codec->reg_cache = &wm8994->reg_cache;
+
 	wm8994->pdata = dev_get_platdata(codec->dev->parent);
 	wm8994->codec = codec;
 
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 2b07b17..bc9e6b0 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -157,12 +157,23 @@
 }
 
 /* davinci-evm digital audio interface glue - connects codec <--> CPU */
-static struct snd_soc_dai_link evm_dai = {
+static struct snd_soc_dai_link dm6446_evm_dai = {
 	.name = "TLV320AIC3X",
 	.stream_name = "AIC3X",
-	.cpu_dai_name = "davinci-mcasp.0",
+	.cpu_dai_name = "davinci-mcbsp",
 	.codec_dai_name = "tlv320aic3x-hifi",
-	.codec_name = "tlv320aic3x-codec.0-001a",
+	.codec_name = "tlv320aic3x-codec.1-001b",
+	.platform_name = "davinci-pcm-audio",
+	.init = evm_aic3x_init,
+	.ops = &evm_ops,
+};
+
+static struct snd_soc_dai_link dm355_evm_dai = {
+	.name = "TLV320AIC3X",
+	.stream_name = "AIC3X",
+	.cpu_dai_name = "davinci-mcbsp.1",
+	.codec_dai_name = "tlv320aic3x-hifi",
+	.codec_name = "tlv320aic3x-codec.1-001b",
 	.platform_name = "davinci-pcm-audio",
 	.init = evm_aic3x_init,
 	.ops = &evm_ops,
@@ -172,10 +183,10 @@
 #ifdef CONFIG_SND_DM365_AIC3X_CODEC
 	.name = "TLV320AIC3X",
 	.stream_name = "AIC3X",
-	.cpu_dai_name = "davinci-i2s",
+	.cpu_dai_name = "davinci-mcbsp",
 	.codec_dai_name = "tlv320aic3x-hifi",
 	.init = evm_aic3x_init,
-	.codec_name = "tlv320aic3x-codec.0-001a",
+	.codec_name = "tlv320aic3x-codec.1-0018",
 	.ops = &evm_ops,
 #elif defined(CONFIG_SND_DM365_VOICE_CODEC)
 	.name = "Voice Codec - CQ93VC",
@@ -219,10 +230,17 @@
 	.ops = &evm_ops,
 };
 
-/* davinci dm6446, dm355 evm audio machine driver */
-static struct snd_soc_card snd_soc_card_evm = {
-	.name = "DaVinci EVM",
-	.dai_link = &evm_dai,
+/* davinci dm6446 evm audio machine driver */
+static struct snd_soc_card dm6446_snd_soc_card_evm = {
+	.name = "DaVinci DM6446 EVM",
+	.dai_link = &dm6446_evm_dai,
+	.num_links = 1,
+};
+
+/* davinci dm355 evm audio machine driver */
+static struct snd_soc_card dm355_snd_soc_card_evm = {
+	.name = "DaVinci DM355 EVM",
+	.dai_link = &dm355_evm_dai,
 	.num_links = 1,
 };
 
@@ -261,10 +279,10 @@
 	int ret;
 
 	if (machine_is_davinci_evm()) {
-		evm_snd_dev_data = &snd_soc_card_evm;
+		evm_snd_dev_data = &dm6446_snd_soc_card_evm;
 		index = 0;
 	} else if (machine_is_davinci_dm355_evm()) {
-		evm_snd_dev_data = &snd_soc_card_evm;
+		evm_snd_dev_data = &dm355_snd_soc_card_evm;
 		index = 1;
 	} else if (machine_is_davinci_dm365_evm()) {
 		evm_snd_dev_data = &dm365_snd_soc_card_evm;
diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index d46b545..9e0e565 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -426,9 +426,6 @@
 	snd_pcm_format_t fmt;
 	unsigned element_cnt = 1;
 
-	dai->capture_dma_data = dev->dma_params;
-	dai->playback_dma_data = dev->dma_params;
-
 	/* general line settings */
 	spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
 	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
@@ -601,6 +598,15 @@
 	return ret;
 }
 
+static int davinci_i2s_startup(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct davinci_mcbsp_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	snd_soc_dai_set_dma_data(dai, substream, dev->dma_params);
+	return 0;
+}
+
 static void davinci_i2s_shutdown(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {
@@ -612,6 +618,7 @@
 #define DAVINCI_I2S_RATES	SNDRV_PCM_RATE_8000_96000
 
 static struct snd_soc_dai_ops davinci_i2s_dai_ops = {
+	.startup	= davinci_i2s_startup,
 	.shutdown	= davinci_i2s_shutdown,
 	.prepare	= davinci_i2s_prepare,
 	.trigger	= davinci_i2s_trigger,
@@ -749,7 +756,7 @@
 	.probe		= davinci_i2s_probe,
 	.remove		= davinci_i2s_remove,
 	.driver		= {
-		.name	= "davinci-i2s",
+		.name	= "davinci-mcbsp",
 		.owner	= THIS_MODULE,
 	},
 };
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 86918ee..fb55d2c 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -715,9 +715,6 @@
 	int word_length;
 	u8 fifo_level;
 
-	cpu_dai->capture_dma_data = dev->dma_params;
-	cpu_dai->playback_dma_data = dev->dma_params;
-
 	davinci_hw_common_param(dev, substream->stream);
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		fifo_level = dev->txnumevt;
@@ -799,7 +796,17 @@
 	return ret;
 }
 
+static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
+				 struct snd_soc_dai *dai)
+{
+	struct davinci_audio_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	snd_soc_dai_set_dma_data(dai, substream, dev->dma_params);
+	return 0;
+}
+
 static struct snd_soc_dai_ops davinci_mcasp_dai_ops = {
+	.startup	= davinci_mcasp_startup,
 	.trigger	= davinci_mcasp_trigger,
 	.hw_params	= davinci_mcasp_hw_params,
 	.set_fmt	= davinci_mcasp_set_dai_fmt,
diff --git a/sound/soc/davinci/davinci-sffsdr.c b/sound/soc/davinci/davinci-sffsdr.c
index 009b652..6c6666a 100644
--- a/sound/soc/davinci/davinci-sffsdr.c
+++ b/sound/soc/davinci/davinci-sffsdr.c
@@ -84,7 +84,7 @@
 static struct snd_soc_dai_link sffsdr_dai = {
 	.name = "PCM3008", /* Codec name */
 	.stream_name = "PCM3008 HiFi",
-	.cpu_dai_name = "davinci-asp.0",
+	.cpu_dai_name = "davinci-mcbsp",
 	.codec_dai_name = "pcm3008-hifi",
 	.codec_name = "pcm3008-codec",
 	.platform_name = "davinci-pcm-audio",
diff --git a/sound/soc/davinci/davinci-vcif.c b/sound/soc/davinci/davinci-vcif.c
index ea232f6..fb4cc1e 100644
--- a/sound/soc/davinci/davinci-vcif.c
+++ b/sound/soc/davinci/davinci-vcif.c
@@ -97,9 +97,6 @@
 			&davinci_vcif_dev->dma_params[substream->stream];
 	u32 w;
 
-	dai->capture_dma_data = davinci_vcif_dev->dma_params;
-	dai->playback_dma_data = davinci_vcif_dev->dma_params;
-
 	/* Restart the codec before setup */
 	davinci_vcif_stop(substream);
 	davinci_vcif_start(substream);
@@ -174,9 +171,19 @@
 	return ret;
 }
 
+static int davinci_vcif_startup(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct davinci_vcif_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	snd_soc_dai_set_dma_data(dai, substream, dev->dma_params);
+	return 0;
+}
+
 #define DAVINCI_VCIF_RATES	SNDRV_PCM_RATE_8000_48000
 
 static struct snd_soc_dai_ops davinci_vcif_dai_ops = {
+	.startup	= davinci_vcif_startup,
 	.trigger	= davinci_vcif_trigger,
 	.hw_params	= davinci_vcif_hw_params,
 };
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
index 74ffed4..9018fa5 100644
--- a/sound/soc/fsl/mpc5200_psc_i2s.c
+++ b/sound/soc/fsl/mpc5200_psc_i2s.c
@@ -160,7 +160,7 @@
 	rc = snd_soc_register_dais(&op->dev, psc_i2s_dai, ARRAY_SIZE(psc_i2s_dai));
 	if (rc != 0) {
 		pr_err("Failed to register DAI\n");
-		return 0;
+		return rc;
 	}
 
 	psc_dma = dev_get_drvdata(&op->dev);
diff --git a/sound/soc/imx/eukrea-tlv320.c b/sound/soc/imx/eukrea-tlv320.c
index b596752..dd4fffd 100644
--- a/sound/soc/imx/eukrea-tlv320.c
+++ b/sound/soc/imx/eukrea-tlv320.c
@@ -34,8 +34,8 @@
 			    struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
 	int ret;
 
 	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
@@ -79,10 +79,10 @@
 static struct snd_soc_dai_link eukrea_tlv320_dai = {
 	.name		= "tlv320aic23",
 	.stream_name	= "TLV320AIC23",
-	.codec_dai	= "tlv320aic23-hifi",
+	.codec_dai_name	= "tlv320aic23-hifi",
 	.platform_name	= "imx-pcm-audio.0",
 	.codec_name	= "tlv320aic23-codec.0-001a",
-	.cpu_dai = "imx-ssi.0",
+	.cpu_dai_name	= "imx-ssi.0",
 	.ops		= &eukrea_tlv320_snd_ops,
 };
 
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index fd493ee..671ef8d 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/dmaengine.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
@@ -27,165 +28,146 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <mach/dma-mx1-mx2.h>
+#include <mach/dma.h>
 
 #include "imx-ssi.h"
 
 struct imx_pcm_runtime_data {
-	int sg_count;
-	struct scatterlist *sg_list;
-	int period;
+	int period_bytes;
 	int periods;
-	unsigned long dma_addr;
 	int dma;
-	struct snd_pcm_substream *substream;
 	unsigned long offset;
 	unsigned long size;
-	unsigned long period_cnt;
 	void *buf;
 	int period_time;
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *dma_chan;
+	struct imx_dma_data dma_data;
 };
 
-/* Called by the DMA framework when a period has elapsed */
-static void imx_ssi_dma_progression(int channel, void *data,
-					struct scatterlist *sg)
+static void audio_dma_irq(void *data)
 {
-	struct snd_pcm_substream *substream = data;
+	struct snd_pcm_substream *substream = (struct snd_pcm_substream *)data;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
 
-	if (!sg)
-		return;
+	iprtd->offset += iprtd->period_bytes;
+	iprtd->offset %= iprtd->period_bytes * iprtd->periods;
 
-	runtime = iprtd->substream->runtime;
-
-	iprtd->offset = sg->dma_address - runtime->dma_addr;
-
-	snd_pcm_period_elapsed(iprtd->substream);
+	snd_pcm_period_elapsed(substream);
 }
 
-static void imx_ssi_dma_callback(int channel, void *data)
+static bool filter(struct dma_chan *chan, void *param)
 {
-	pr_err("%s shouldn't be called\n", __func__);
+	struct imx_pcm_runtime_data *iprtd = param;
+
+	if (!imx_dma_is_general_purpose(chan))
+		return false;
+
+        chan->private = &iprtd->dma_data;
+
+        return true;
 }
 
-static void snd_imx_dma_err_callback(int channel, void *data, int err)
-{
-	struct snd_pcm_substream *substream = data;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct imx_pcm_dma_params *dma_params = 
-		snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
-	int ret;
-
-	pr_err("DMA timeout on channel %d -%s%s%s%s\n",
-		 channel,
-		 err & IMX_DMA_ERR_BURST ?    " burst" : "",
-		 err & IMX_DMA_ERR_REQUEST ?  " request" : "",
-		 err & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
-		 err & IMX_DMA_ERR_BUFFER ?   " buffer" : "");
-
-	imx_dma_disable(iprtd->dma);
-	ret = imx_dma_setup_sg(iprtd->dma, iprtd->sg_list, iprtd->sg_count,
-			IMX_DMA_LENGTH_LOOP, dma_params->dma_addr,
-			substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
-			DMA_MODE_WRITE : DMA_MODE_READ);
-	if (!ret)
-		imx_dma_enable(iprtd->dma);
-}
-
-static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream)
+static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct imx_pcm_dma_params *dma_params;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+	struct dma_slave_config slave_config;
+	dma_cap_mask_t mask;
+	enum dma_slave_buswidth buswidth;
 	int ret;
 
 	dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
 
-	iprtd->dma = imx_dma_request_by_prio(DRV_NAME, DMA_PRIO_HIGH);
-	if (iprtd->dma < 0) {
-		pr_err("Failed to claim the audio DMA\n");
-		return -ENODEV;
+	iprtd->dma_data.peripheral_type = IMX_DMATYPE_SSI;
+	iprtd->dma_data.priority = DMA_PRIO_HIGH;
+	iprtd->dma_data.dma_request = dma_params->dma;
+
+	/* Try to grab a DMA channel */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	iprtd->dma_chan = dma_request_channel(mask, filter, iprtd);
+	if (!iprtd->dma_chan)
+		return -EINVAL;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+	case SNDRV_PCM_FORMAT_S24_LE:
+		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		break;
+	default:
+		return 0;
 	}
 
-	ret = imx_dma_setup_handlers(iprtd->dma,
-				imx_ssi_dma_callback,
-				snd_imx_dma_err_callback, substream);
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		slave_config.direction = DMA_TO_DEVICE;
+		slave_config.dst_addr = dma_params->dma_addr;
+		slave_config.dst_addr_width = buswidth;
+		slave_config.dst_maxburst = dma_params->burstsize;
+	} else {
+		slave_config.direction = DMA_FROM_DEVICE;
+		slave_config.src_addr = dma_params->dma_addr;
+		slave_config.src_addr_width = buswidth;
+		slave_config.src_maxburst = dma_params->burstsize;
+	}
+
+	ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);
 	if (ret)
-		goto out;
-
-	ret = imx_dma_setup_progression_handler(iprtd->dma,
-			imx_ssi_dma_progression);
-	if (ret) {
-		pr_err("Failed to setup the DMA handler\n");
-		goto out;
-	}
-
-	ret = imx_dma_config_channel(iprtd->dma,
-			IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
-			IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
-			dma_params->dma, 1);
-	if (ret < 0) {
-		pr_err("Cannot configure DMA channel: %d\n", ret);
-		goto out;
-	}
-
-	imx_dma_config_burstlen(iprtd->dma, dma_params->burstsize * 2);
+		return ret;
 
 	return 0;
-out:
-	imx_dma_free(iprtd->dma);
-	return ret;
 }
 
 static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
-	int i;
 	unsigned long dma_addr;
+	struct dma_chan *chan;
+	struct imx_pcm_dma_params *dma_params;
+	int ret;
 
-	imx_ssi_dma_alloc(substream);
+	dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	ret = imx_ssi_dma_alloc(substream, params);
+	if (ret)
+		return ret;
+	chan = iprtd->dma_chan;
 
 	iprtd->size = params_buffer_bytes(params);
 	iprtd->periods = params_periods(params);
-	iprtd->period = params_period_bytes(params);
+	iprtd->period_bytes = params_period_bytes(params);
 	iprtd->offset = 0;
 	iprtd->period_time = HZ / (params_rate(params) /
 			params_period_size(params));
 
 	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
 
-	if (iprtd->sg_count != iprtd->periods) {
-		kfree(iprtd->sg_list);
-
-		iprtd->sg_list = kcalloc(iprtd->periods + 1,
-				sizeof(struct scatterlist), GFP_KERNEL);
-		if (!iprtd->sg_list)
-			return -ENOMEM;
-		iprtd->sg_count = iprtd->periods + 1;
-	}
-
-	sg_init_table(iprtd->sg_list, iprtd->sg_count);
 	dma_addr = runtime->dma_addr;
 
-	for (i = 0; i < iprtd->periods; i++) {
-		iprtd->sg_list[i].page_link = 0;
-		iprtd->sg_list[i].offset = 0;
-		iprtd->sg_list[i].dma_address = dma_addr;
-		iprtd->sg_list[i].length = iprtd->period;
-		dma_addr += iprtd->period;
+	iprtd->buf = (unsigned int *)substream->dma_buffer.area;
+
+	iprtd->desc = chan->device->device_prep_dma_cyclic(chan, dma_addr,
+			iprtd->period_bytes * iprtd->periods,
+			iprtd->period_bytes,
+			substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+			DMA_TO_DEVICE : DMA_FROM_DEVICE);
+	if (!iprtd->desc) {
+		dev_err(&chan->dev->device, "cannot prepare slave dma\n");
+		return -EINVAL;
 	}
 
-	/* close the loop */
-	iprtd->sg_list[iprtd->sg_count - 1].offset = 0;
-	iprtd->sg_list[iprtd->sg_count - 1].length = 0;
-	iprtd->sg_list[iprtd->sg_count - 1].page_link =
-			((unsigned long) iprtd->sg_list | 0x01) & ~0x02;
+	iprtd->desc->callback = audio_dma_irq;
+	iprtd->desc->callback_param = substream;
+
 	return 0;
 }
 
@@ -194,41 +176,21 @@
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
 
-	if (iprtd->dma >= 0) {
-		imx_dma_free(iprtd->dma);
-		iprtd->dma = -EINVAL;
+	if (iprtd->dma_chan) {
+		dma_release_channel(iprtd->dma_chan);
+		iprtd->dma_chan = NULL;
 	}
 
-	kfree(iprtd->sg_list);
-	iprtd->sg_list = NULL;
-
 	return 0;
 }
 
 static int snd_imx_pcm_prepare(struct snd_pcm_substream *substream)
 {
-	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct imx_pcm_dma_params *dma_params;
-	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
-	int err;
 
 	dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
 
-	iprtd->substream = substream;
-	iprtd->buf = (unsigned int *)substream->dma_buffer.area;
-	iprtd->period_cnt = 0;
-
-	pr_debug("%s: buf: %p period: %d periods: %d\n",
-			__func__, iprtd->buf, iprtd->period, iprtd->periods);
-
-	err = imx_dma_setup_sg(iprtd->dma, iprtd->sg_list, iprtd->sg_count,
-			IMX_DMA_LENGTH_LOOP, dma_params->dma_addr,
-			substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
-			DMA_MODE_WRITE : DMA_MODE_READ);
-	if (err)
-		return err;
-
 	return 0;
 }
 
@@ -241,14 +203,14 @@
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		imx_dma_enable(iprtd->dma);
+		dmaengine_submit(iprtd->desc);
 
 		break;
 
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		imx_dma_disable(iprtd->dma);
+		dmaengine_terminate_all(iprtd->dma_chan);
 
 		break;
 	default:
@@ -263,6 +225,9 @@
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
 
+	pr_debug("%s: %ld %ld\n", __func__, iprtd->offset,
+			bytes_to_frames(substream->runtime, iprtd->offset));
+
 	return bytes_to_frames(substream->runtime, iprtd->offset);
 }
 
@@ -279,7 +244,7 @@
 	.channels_max = 2,
 	.buffer_bytes_max = IMX_SSI_DMABUF_SIZE,
 	.period_bytes_min = 128,
-	.period_bytes_max = 16 * 1024,
+	.period_bytes_max = 65535, /* Limited by SDMA engine */
 	.periods_min = 2,
 	.periods_max = 255,
 	.fifo_size = 0,
@@ -304,11 +269,23 @@
 	}
 
 	snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
+
+	return 0;
+}
+
+static int snd_imx_close(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+	kfree(iprtd);
+
 	return 0;
 }
 
 static struct snd_pcm_ops imx_pcm_ops = {
 	.open		= snd_imx_open,
+	.close		= snd_imx_close,
 	.ioctl		= snd_pcm_lib_ioctl,
 	.hw_params	= snd_imx_pcm_hw_params,
 	.hw_free	= snd_imx_pcm_hw_free,
@@ -340,7 +317,6 @@
 			.name = "imx-pcm-audio",
 			.owner = THIS_MODULE,
 	},
-
 	.probe = imx_soc_platform_probe,
 	.remove = __devexit_p(imx_soc_platform_remove),
 };
@@ -356,4 +332,3 @@
 	platform_driver_unregister(&imx_pcm_driver);
 }
 module_exit(snd_imx_pcm_exit);
-
diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c
index d4bd345..d2d98c7 100644
--- a/sound/soc/imx/imx-ssi.c
+++ b/sound/soc/imx/imx-ssi.c
@@ -439,7 +439,22 @@
 }
 EXPORT_SYMBOL_GPL(imx_pcm_free);
 
+static int imx_ssi_dai_probe(struct snd_soc_dai *dai)
+{
+	struct imx_ssi *ssi = dev_get_drvdata(dai->dev);
+	uint32_t val;
+
+	snd_soc_dai_set_drvdata(dai, ssi);
+
+	val = SSI_SFCSR_TFWM0(ssi->dma_params_tx.burstsize) |
+		SSI_SFCSR_RFWM0(ssi->dma_params_rx.burstsize);
+	writel(val, ssi->base + SSI_SFCSR);
+
+	return 0;
+}
+
 static struct snd_soc_dai_driver imx_ssi_dai = {
+	.probe = imx_ssi_dai_probe,
 	.playback = {
 		.channels_min = 2,
 		.channels_max = 2,
@@ -455,20 +470,6 @@
 	.ops = &imx_ssi_pcm_dai_ops,
 };
 
-static int imx_ssi_dai_probe(struct snd_soc_dai *dai)
-{
-	struct imx_ssi *ssi = dev_get_drvdata(dai->dev);
-	uint32_t val;
-
-	snd_soc_dai_set_drvdata(dai, ssi);
-
-	val = SSI_SFCSR_TFWM0(ssi->dma_params_tx.burstsize) |
-		SSI_SFCSR_RFWM0(ssi->dma_params_rx.burstsize);
-	writel(val, ssi->base + SSI_SFCSR);
-
-	return 0;
-}
-
 static struct snd_soc_dai_driver imx_ac97_dai = {
 	.probe = imx_ssi_dai_probe,
 	.ac97_control = 1,
@@ -677,7 +678,17 @@
 		goto failed_register;
 	}
 
-	ssi->soc_platform_pdev = platform_device_alloc("imx-fiq-pcm-audio", pdev->id);
+	ssi->soc_platform_pdev_fiq = platform_device_alloc("imx-fiq-pcm-audio", pdev->id);
+	if (!ssi->soc_platform_pdev_fiq)
+		goto failed_pdev_fiq_alloc;
+	platform_set_drvdata(ssi->soc_platform_pdev_fiq, ssi);
+	ret = platform_device_add(ssi->soc_platform_pdev_fiq);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform device\n");
+		goto failed_pdev_fiq_add;
+	}
+
+	ssi->soc_platform_pdev = platform_device_alloc("imx-pcm-audio", pdev->id);
 	if (!ssi->soc_platform_pdev)
 		goto failed_pdev_alloc;
 	platform_set_drvdata(ssi->soc_platform_pdev, ssi);
@@ -692,6 +703,9 @@
 failed_pdev_add:
 	platform_device_put(ssi->soc_platform_pdev);
 failed_pdev_alloc:
+failed_pdev_fiq_add:
+	platform_device_put(ssi->soc_platform_pdev_fiq);
+failed_pdev_fiq_alloc:
 	snd_soc_unregister_dai(&pdev->dev);
 failed_register:
 failed_ac97:
diff --git a/sound/soc/imx/imx-ssi.h b/sound/soc/imx/imx-ssi.h
index 53b780d..a4406a1 100644
--- a/sound/soc/imx/imx-ssi.h
+++ b/sound/soc/imx/imx-ssi.h
@@ -185,6 +185,9 @@
 
 #define DRV_NAME "imx-ssi"
 
+#include <linux/dmaengine.h>
+#include <mach/dma.h>
+
 struct imx_pcm_dma_params {
 	int dma;
 	unsigned long dma_addr;
@@ -212,6 +215,7 @@
 	int enabled;
 
 	struct platform_device *soc_platform_pdev;
+	struct platform_device *soc_platform_pdev_fiq;
 };
 
 struct snd_soc_platform *imx_ssi_fiq_init(struct platform_device *pdev,
diff --git a/sound/soc/imx/phycore-ac97.c b/sound/soc/imx/phycore-ac97.c
index 6a65dd7..39f2373 100644
--- a/sound/soc/imx/phycore-ac97.c
+++ b/sound/soc/imx/phycore-ac97.c
@@ -20,9 +20,6 @@
 #include <sound/soc-dapm.h>
 #include <asm/mach-types.h>
 
-#include "../codecs/wm9712.h"
-#include "imx-ssi.h"
-
 static struct snd_soc_card imx_phycore;
 
 static struct snd_soc_ops imx_phycore_hifi_ops = {
@@ -41,7 +38,7 @@
 };
 
 static struct snd_soc_card imx_phycore = {
-	.name		= "PhyCORE-audio",
+	.name		= "PhyCORE-ac97-audio",
 	.dai_link	= imx_phycore_dai_ac97,
 	.num_links	= ARRAY_SIZE(imx_phycore_dai_ac97),
 };
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index d211c9f..7e84f24 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -644,15 +644,23 @@
 
 
 	case OMAP_MCBSP_CLKR_SRC_CLKR:
+		if (cpu_class_is_omap1())
+			break;
 		omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKR);
 		break;
 	case OMAP_MCBSP_CLKR_SRC_CLKX:
+		if (cpu_class_is_omap1())
+			break;
 		omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKX);
 		break;
 	case OMAP_MCBSP_FSR_SRC_FSR:
+		if (cpu_class_is_omap1())
+			break;
 		omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSR);
 		break;
 	case OMAP_MCBSP_FSR_SRC_FSX:
+		if (cpu_class_is_omap1())
+			break;
 		omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSX);
 		break;
 	default:
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 97e9423..f451acd 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -100,8 +100,13 @@
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	corgi_ext_control(codec);
+
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index b8207ce..5ef0526 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -72,9 +72,13 @@
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	magician_ext_control(codec);
 
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index af84ee9..84edd03 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -77,8 +77,13 @@
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	poodle_ext_control(codec);
+
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index f470f36..0b30d7d 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -108,8 +108,13 @@
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	spitz_ext_control(codec);
+
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index 73d0edd..7b983f9 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -81,8 +81,13 @@
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	tosa_ext_control(codec);
+
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 8a6b53c..d85bf8a 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -2,6 +2,7 @@
 	tristate "SoC Audio for the Samsung S3CXXXX chips"
 	depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
 	select S3C64XX_DMA if ARCH_S3C64XX
+	select S3C2410_DMA if ARCH_S3C2410
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  the S3C24XX AC97 or I2S interfaces. You will also need to
diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c b/sound/soc/s3c24xx/rx1950_uda1380.c
index ffd5cf2..468cc11 100644
--- a/sound/soc/s3c24xx/rx1950_uda1380.c
+++ b/sound/soc/s3c24xx/rx1950_uda1380.c
@@ -50,7 +50,6 @@
 	16000,
 	44100,
 	48000,
-	88200,
 };
 
 static struct snd_pcm_hw_constraint_list hw_rates = {
@@ -130,7 +129,6 @@
 };
 
 static struct platform_device *s3c24xx_snd_device;
-static struct clk *xtal;
 
 static int rx1950_startup(struct snd_pcm_substream *substream)
 {
@@ -179,10 +177,8 @@
 	case 44100:
 	case 88200:
 		clk_source = S3C24XX_CLKSRC_MPLL;
-		fs_mode = S3C2410_IISMOD_256FS;
-		div = clk_get_rate(xtal) / (256 * rate);
-		if (clk_get_rate(xtal) % (256 * rate) > (128 * rate))
-			div++;
+		fs_mode = S3C2410_IISMOD_384FS;
+		div = 1;
 		break;
 	default:
 		printk(KERN_ERR "%s: rate %d is not supported\n",
@@ -210,7 +206,7 @@
 
 	/* set MCLK division for sample rate */
 	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
-		S3C2410_IISMOD_384FS);
+		fs_mode);
 	if (ret < 0)
 		return ret;
 
@@ -295,17 +291,8 @@
 		goto err_plat_add;
 	}
 
-	xtal = clk_get(&s3c24xx_snd_device->dev, "xtal");
-
-	if (IS_ERR(xtal)) {
-		ret = PTR_ERR(xtal);
-		platform_device_unregister(s3c24xx_snd_device);
-		goto err_clk;
-	}
-
 	return 0;
 
-err_clk:
 err_plat_add:
 err_plat_alloc:
 err_gpio_conf:
@@ -320,7 +307,6 @@
 	platform_device_unregister(s3c24xx_snd_device);
 	snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
 		hp_jack_gpios);
-	clk_put(xtal);
 	gpio_free(S3C2410_GPA(1));
 }
 
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 507e709..4c2404b 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -132,6 +132,8 @@
 	struct fsi_stream playback;
 	struct fsi_stream capture;
 
+	long rate;
+
 	u32 mst_ctrl;
 };
 
@@ -854,10 +856,17 @@
 {
 	struct fsi_priv *fsi = fsi_get_priv(substream);
 	int is_play = fsi_is_play(substream);
+	struct fsi_master *master = fsi_get_master(fsi);
+	int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 
 	fsi_irq_disable(fsi, is_play);
 	fsi_clk_ctrl(fsi, 0);
 
+	set_rate = master->info->set_rate;
+	if (set_rate && fsi->rate)
+		set_rate(dai->dev, fsi_is_port_a(fsi), fsi->rate, 0);
+	fsi->rate = 0;
+
 	pm_runtime_put_sync(dai->dev);
 }
 
@@ -891,20 +900,20 @@
 {
 	struct fsi_priv *fsi = fsi_get_priv(substream);
 	struct fsi_master *master = fsi_get_master(fsi);
-	int (*set_rate)(int is_porta, int rate) = master->info->set_rate;
+	int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 	int fsi_ver = master->core->ver;
-	int is_play = fsi_is_play(substream);
+	long rate = params_rate(params);
 	int ret;
 
-	/* if slave mode, set_rate is not needed */
-	if (!fsi_is_master_mode(fsi, is_play))
+	set_rate = master->info->set_rate;
+	if (!set_rate)
 		return 0;
 
-	/* it is error if no set_rate */
-	if (!set_rate)
-		return -EIO;
+	ret = set_rate(dai->dev, fsi_is_port_a(fsi), rate, 1);
+	if (ret < 0) /* error */
+		return ret;
 
-	ret = set_rate(fsi_is_port_a(fsi), params_rate(params));
+	fsi->rate = rate;
 	if (ret > 0) {
 		u32 data = 0;
 
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 614a8b3..441285a 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3043,8 +3043,10 @@
 	for (i = 0; i < count; i++) {
 
 		dai = kzalloc(sizeof(struct snd_soc_dai), GFP_KERNEL);
-		if (dai == NULL)
-			return -ENOMEM;
+		if (dai == NULL) {
+			ret = -ENOMEM;
+			goto err;
+		}
 
 		/* create DAI component name */
 		dai->name = fmt_multiple_name(dev, &dai_drv[i]);
@@ -3263,9 +3265,6 @@
 	return 0;
 
 error:
-	for (i--; i >= 0; i--)
-		snd_soc_unregister_dai(dev);
-
 	if (codec->reg_cache)
 		kfree(codec->reg_cache);
 	kfree(codec->name);
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 7d85c64..75ed649 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -683,12 +683,12 @@
 			    struct snd_soc_dapm_widget *b,
 			    int sort[])
 {
-	if (a->codec != b->codec)
-		return (unsigned long)a - (unsigned long)b;
 	if (sort[a->id] != sort[b->id])
 		return sort[a->id] - sort[b->id];
 	if (a->reg != b->reg)
 		return a->reg - b->reg;
+	if (a->codec != b->codec)
+		return (unsigned long)a->codec - (unsigned long)b->codec;
 
 	return 0;
 }
diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
index 1bc56b2..337a002 100644
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
@@ -155,7 +155,7 @@
 	if (max_tries < 1)
 		max_tries = 1;
 
-	/* ssc_div must be a power of 2. */
+	/* ssc_div must be even. */
 	ssc_div = (ssc_div + 1) & ~1UL;
 
 	if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 93bd2ff..e2c2de2 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -697,17 +697,18 @@
 	if (err < 0)
 		err = event__synthesize_kernel_mmap(process_synthesized_event,
 						    session, machine, "_stext");
-	if (err < 0) {
-		pr_err("Couldn't record kernel reference relocation symbol.\n");
-		return err;
-	}
+	if (err < 0)
+		pr_err("Couldn't record kernel reference relocation symbol\n"
+		       "Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
+		       "Check /proc/kallsyms permission or run as root.\n");
 
 	err = event__synthesize_modules(process_synthesized_event,
 					session, machine);
-	if (err < 0) {
-		pr_err("Couldn't record kernel reference relocation symbol.\n");
-		return err;
-	}
+	if (err < 0)
+		pr_err("Couldn't record kernel module information.\n"
+		       "Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
+		       "Check /proc/modules permission or run as root.\n");
+
 	if (perf_guest)
 		perf_session__process_machines(session, event__synthesize_guest_os);
 
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index b39f499..0500895 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -295,7 +295,9 @@
 {
 	struct rb_node **p = &self->rb_node;
 	struct rb_node *parent = NULL;
-	struct symbol_name_rb_node *symn = ((void *)sym) - sizeof(*parent), *s;
+	struct symbol_name_rb_node *symn, *s;
+
+	symn = container_of(sym, struct symbol_name_rb_node, sym);
 
 	while (*p != NULL) {
 		parent = *p;