tty-usb-option: Coding style
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 4350990..e4eca95 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -43,8 +43,10 @@
#include <linux/usb/serial.h>
/* Function prototypes */
-static int option_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void option_close(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int option_open(struct tty_struct *tty, struct usb_serial_port *port,
+ struct file *filp);
+static void option_close(struct tty_struct *tty, struct usb_serial_port *port,
+ struct file *filp);
static int option_startup(struct usb_serial *serial);
static void option_shutdown(struct usb_serial *serial);
static int option_write_room(struct tty_struct *tty);
@@ -393,15 +395,15 @@
return 0;
failed_driver_register:
- usb_serial_deregister (&option_1port_device);
+ usb_serial_deregister(&option_1port_device);
failed_1port_device_register:
return retval;
}
static void __exit option_exit(void)
{
- usb_deregister (&option_driver);
- usb_serial_deregister (&option_1port_device);
+ usb_deregister(&option_driver);
+ usb_serial_deregister(&option_1port_device);
}
module_init(option_init);
@@ -471,7 +473,7 @@
i = 0;
left = count;
- for (i=0; left > 0 && i < N_OUT_URB; i++) {
+ for (i = 0; left > 0 && i < N_OUT_URB; i++) {
todo = left;
if (todo > OUT_BUFLEN)
todo = OUT_BUFLEN;
@@ -492,7 +494,7 @@
usb_pipeendpoint(this_urb->pipe), i);
/* send the data */
- memcpy (this_urb->transfer_buffer, buf, todo);
+ memcpy(this_urb->transfer_buffer, buf, todo);
this_urb->transfer_buffer_length = todo;
this_urb->dev = port->serial->dev;
@@ -583,7 +585,7 @@
struct usb_serial *serial = port->serial;
dbg("%s", __func__);
- dbg("%s: urb %p port %p has data %p", __func__,urb,port,portdata);
+ dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
if (status == 0) {
struct usb_ctrlrequest *req_pkt =
@@ -613,7 +615,7 @@
tty_hangup(port->port.tty);
} else {
dbg("%s: type %x req %x", __func__,
- req_pkt->bRequestType,req_pkt->bRequest);
+ req_pkt->bRequestType, req_pkt->bRequest);
}
} else
dbg("%s: error %d", __func__, status);
@@ -639,7 +641,7 @@
portdata = usb_get_serial_port_data(port);
- for (i=0; i < N_OUT_URB; i++) {
+ for (i = 0; i < N_OUT_URB; i++) {
this_urb = portdata->out_urbs[i];
if (this_urb && !test_bit(i, &portdata->out_busy))
data_len += OUT_BUFLEN;
@@ -659,7 +661,7 @@
portdata = usb_get_serial_port_data(port);
- for (i=0; i < N_OUT_URB; i++) {
+ for (i = 0; i < N_OUT_URB; i++) {
this_urb = portdata->out_urbs[i];
/* FIXME: This locking is insufficient as this_urb may
go unused during the test */
@@ -689,7 +691,7 @@
/* Reset low level data toggle and start reading from endpoints */
for (i = 0; i < N_IN_URB; i++) {
urb = portdata->in_urbs[i];
- if (! urb)
+ if (!urb)
continue;
if (urb->dev != serial->dev) {
dbg("%s: dev %p != %p", __func__,
@@ -714,7 +716,7 @@
/* Reset low level data toggle on out endpoints */
for (i = 0; i < N_OUT_URB; i++) {
urb = portdata->out_urbs[i];
- if (! urb)
+ if (!urb)
continue;
urb->dev = serial->dev;
/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
@@ -726,7 +728,7 @@
option_send_setup(tty, port);
- return (0);
+ return 0;
}
static void option_close(struct tty_struct *tty,
@@ -784,7 +786,7 @@
/* Setup urbs */
static void option_setup_urbs(struct usb_serial *serial)
{
- int i,j;
+ int i, j;
struct usb_serial_port *port;
struct option_port_private *portdata;
@@ -794,18 +796,22 @@
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
- /* Do indat endpoints first */
+ /* Do indat endpoints first */
for (j = 0; j < N_IN_URB; ++j) {
- portdata->in_urbs[j] = option_setup_urb (serial,
- port->bulk_in_endpointAddress, USB_DIR_IN, port,
- portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
+ portdata->in_urbs[j] = option_setup_urb(serial,
+ port->bulk_in_endpointAddress,
+ USB_DIR_IN, port,
+ portdata->in_buffer[j],
+ IN_BUFLEN, option_indat_callback);
}
/* outdat endpoints */
for (j = 0; j < N_OUT_URB; ++j) {
- portdata->out_urbs[j] = option_setup_urb (serial,
- port->bulk_out_endpointAddress, USB_DIR_OUT, port,
- portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
+ portdata->out_urbs[j] = option_setup_urb(serial,
+ port->bulk_out_endpointAddress,
+ USB_DIR_OUT, port,
+ portdata->out_buffer[j],
+ OUT_BUFLEN, option_outdat_callback);
}
}
}
@@ -834,8 +840,8 @@
val |= 0x02;
return usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 0x22,0x21,val,ifNum,NULL,0,USB_CTRL_SET_TIMEOUT);
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
}
return 0;
}
@@ -856,7 +862,7 @@
if (!portdata) {
dbg("%s: kmalloc for option_port_private (%d) failed!.",
__func__, i);
- return (1);
+ return 1;
}
for (j = 0; j < N_IN_URB; j++) {
@@ -875,17 +881,15 @@
usb_set_serial_port_data(port, portdata);
- if (! port->interrupt_in_urb)
+ if (!port->interrupt_in_urb)
continue;
err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (err)
dbg("%s: submit irq_in urb failed %d",
__func__, err);
}
-
option_setup_urbs(serial);
-
- return (0);
+ return 0;
bail_out_error2:
for (j = 0; j < N_OUT_URB; j++)
@@ -924,7 +928,8 @@
for (j = 0; j < N_IN_URB; j++) {
if (portdata->in_urbs[j]) {
usb_free_urb(portdata->in_urbs[j]);
- free_page((unsigned long)portdata->in_buffer[j]);
+ free_page((unsigned long)
+ portdata->in_buffer[j]);
portdata->in_urbs[j] = NULL;
}
}