| /* |
| * ACPI 3.0 based NUMA setup |
| * Copyright 2004 Andi Kleen, SuSE Labs. |
| * |
| * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs. |
| * |
| * Called from acpi_numa_init while reading the SRAT and SLIT tables. |
| * Assumes all memory regions belonging to a single proximity domain |
| * are in one chunk. Holes between them will be included in the node. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/acpi.h> |
| #include <linux/mmzone.h> |
| #include <linux/bitmap.h> |
| #include <linux/module.h> |
| #include <linux/topology.h> |
| #include <asm/proto.h> |
| #include <asm/numa.h> |
| |
| static struct acpi_table_slit *acpi_slit; |
| |
| static nodemask_t nodes_parsed __initdata; |
| static nodemask_t nodes_found __initdata; |
| static struct node nodes[MAX_NUMNODES] __initdata; |
| static __u8 pxm2node[256] = { [0 ... 255] = 0xff }; |
| |
| static int node_to_pxm(int n); |
| |
| int pxm_to_node(int pxm) |
| { |
| if ((unsigned)pxm >= 256) |
| return 0; |
| return pxm2node[pxm]; |
| } |
| |
| static __init int setup_node(int pxm) |
| { |
| unsigned node = pxm2node[pxm]; |
| if (node == 0xff) { |
| if (nodes_weight(nodes_found) >= MAX_NUMNODES) |
| return -1; |
| node = first_unset_node(nodes_found); |
| node_set(node, nodes_found); |
| pxm2node[pxm] = node; |
| } |
| return pxm2node[pxm]; |
| } |
| |
| static __init int conflicting_nodes(unsigned long start, unsigned long end) |
| { |
| int i; |
| for_each_node_mask(i, nodes_parsed) { |
| struct node *nd = &nodes[i]; |
| if (nd->start == nd->end) |
| continue; |
| if (nd->end > start && nd->start < end) |
| return i; |
| if (nd->end == end && nd->start == start) |
| return i; |
| } |
| return -1; |
| } |
| |
| static __init void cutoff_node(int i, unsigned long start, unsigned long end) |
| { |
| struct node *nd = &nodes[i]; |
| if (nd->start < start) { |
| nd->start = start; |
| if (nd->end < nd->start) |
| nd->start = nd->end; |
| } |
| if (nd->end > end) { |
| nd->end = end; |
| if (nd->start > nd->end) |
| nd->start = nd->end; |
| } |
| } |
| |
| static __init void bad_srat(void) |
| { |
| int i; |
| printk(KERN_ERR "SRAT: SRAT not used.\n"); |
| acpi_numa = -1; |
| for (i = 0; i < MAX_LOCAL_APIC; i++) |
| apicid_to_node[i] = NUMA_NO_NODE; |
| } |
| |
| static __init inline int srat_disabled(void) |
| { |
| return numa_off || acpi_numa < 0; |
| } |
| |
| /* Callback for SLIT parsing */ |
| void __init acpi_numa_slit_init(struct acpi_table_slit *slit) |
| { |
| acpi_slit = slit; |
| } |
| |
| /* Callback for Proximity Domain -> LAPIC mapping */ |
| void __init |
| acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) |
| { |
| int pxm, node; |
| if (srat_disabled() || pa->flags.enabled == 0) |
| return; |
| pxm = pa->proximity_domain; |
| node = setup_node(pxm); |
| if (node < 0) { |
| printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); |
| bad_srat(); |
| return; |
| } |
| apicid_to_node[pa->apic_id] = node; |
| acpi_numa = 1; |
| printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n", |
| pxm, pa->apic_id, node); |
| } |
| |
| /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ |
| void __init |
| acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) |
| { |
| struct node *nd; |
| unsigned long start, end; |
| int node, pxm; |
| int i; |
| |
| if (srat_disabled() || ma->flags.enabled == 0) |
| return; |
| pxm = ma->proximity_domain; |
| node = setup_node(pxm); |
| if (node < 0) { |
| printk(KERN_ERR "SRAT: Too many proximity domains.\n"); |
| bad_srat(); |
| return; |
| } |
| start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32); |
| end = start + (ma->length_lo | ((u64)ma->length_hi << 32)); |
| /* It is fine to add this area to the nodes data it will be used later*/ |
| if (ma->flags.hot_pluggable == 1) |
| printk(KERN_INFO "SRAT: hot plug zone found %lx - %lx \n", |
| start, end); |
| i = conflicting_nodes(start, end); |
| if (i == node) { |
| printk(KERN_WARNING |
| "SRAT: Warning: PXM %d (%lx-%lx) overlaps with itself (%Lx-%Lx)\n", |
| pxm, start, end, nodes[i].start, nodes[i].end); |
| } else if (i >= 0) { |
| printk(KERN_ERR |
| "SRAT: PXM %d (%lx-%lx) overlaps with PXM %d (%Lx-%Lx)\n", |
| pxm, start, end, node_to_pxm(i), |
| nodes[i].start, nodes[i].end); |
| bad_srat(); |
| return; |
| } |
| nd = &nodes[node]; |
| if (!node_test_and_set(node, nodes_parsed)) { |
| nd->start = start; |
| nd->end = end; |
| } else { |
| if (start < nd->start) |
| nd->start = start; |
| if (nd->end < end) |
| nd->end = end; |
| } |
| printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm, |
| nd->start, nd->end); |
| } |
| |
| void __init acpi_numa_arch_fixup(void) {} |
| |
| /* Use the information discovered above to actually set up the nodes. */ |
| int __init acpi_scan_nodes(unsigned long start, unsigned long end) |
| { |
| int i; |
| if (acpi_numa <= 0) |
| return -1; |
| |
| /* First clean up the node list */ |
| for_each_node_mask(i, nodes_parsed) { |
| cutoff_node(i, start, end); |
| if (nodes[i].start == nodes[i].end) |
| node_clear(i, nodes_parsed); |
| } |
| |
| memnode_shift = compute_hash_shift(nodes, nodes_weight(nodes_parsed)); |
| if (memnode_shift < 0) { |
| printk(KERN_ERR |
| "SRAT: No NUMA node hash function found. Contact maintainer\n"); |
| bad_srat(); |
| return -1; |
| } |
| |
| /* Finally register nodes */ |
| for_each_node_mask(i, nodes_parsed) |
| setup_node_bootmem(i, nodes[i].start, nodes[i].end); |
| for (i = 0; i < NR_CPUS; i++) { |
| if (cpu_to_node[i] == NUMA_NO_NODE) |
| continue; |
| if (!node_isset(cpu_to_node[i], nodes_parsed)) |
| numa_set_node(i, NUMA_NO_NODE); |
| } |
| numa_init_array(); |
| return 0; |
| } |
| |
| static int node_to_pxm(int n) |
| { |
| int i; |
| if (pxm2node[n] == n) |
| return n; |
| for (i = 0; i < 256; i++) |
| if (pxm2node[i] == n) |
| return i; |
| return 0; |
| } |
| |
| int __node_distance(int a, int b) |
| { |
| int index; |
| |
| if (!acpi_slit) |
| return a == b ? 10 : 20; |
| index = acpi_slit->localities * node_to_pxm(a); |
| return acpi_slit->entry[index + node_to_pxm(b)]; |
| } |
| |
| EXPORT_SYMBOL(__node_distance); |