| /* |
| * arch/arm/mach-pxa/include/mach/pxa-regs.h |
| * |
| * Author: Nicolas Pitre |
| * Created: Jun 15, 2001 |
| * Copyright: MontaVista Software Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef __PXA_REGS_H |
| #define __PXA_REGS_H |
| |
| |
| /* |
| * PXA Chip selects |
| */ |
| |
| #define PXA_CS0_PHYS 0x00000000 |
| #define PXA_CS1_PHYS 0x04000000 |
| #define PXA_CS2_PHYS 0x08000000 |
| #define PXA_CS3_PHYS 0x0C000000 |
| #define PXA_CS4_PHYS 0x10000000 |
| #define PXA_CS5_PHYS 0x14000000 |
| |
| |
| /* |
| * Personal Computer Memory Card International Association (PCMCIA) sockets |
| */ |
| |
| #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ |
| #define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ |
| #define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ |
| #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ |
| #define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ |
| |
| #define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ |
| #define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ |
| #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ |
| #define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ |
| |
| #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ |
| #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ |
| #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ |
| #define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ |
| |
| #define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ |
| (0x20000000 + (Nb)*PCMCIASp) |
| #define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ |
| #define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ |
| (_PCMCIA (Nb) + 2*PCMCIAPrtSp) |
| #define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ |
| (_PCMCIA (Nb) + 3*PCMCIAPrtSp) |
| |
| #define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ |
| #define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ |
| #define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ |
| #define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ |
| |
| #define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ |
| #define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ |
| #define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ |
| #define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ |
| |
| |
| |
| /* |
| * DMA Controller |
| */ |
| #define DCSR(x) __REG2(0x40000000, (x) << 2) |
| |
| #define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ |
| #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ |
| #define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ |
| #define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ |
| #define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ |
| #define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ |
| #define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ |
| #define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ |
| |
| #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) |
| #define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ |
| #define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ |
| #define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ |
| #define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ |
| #define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ |
| #define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ |
| #define DCSR_EORINTR (1 << 9) /* The end of Receive */ |
| #endif |
| |
| #define DALGN __REG(0x400000a0) /* DMA Alignment Register */ |
| #define DINT __REG(0x400000f0) /* DMA Interrupt Register */ |
| |
| #define DRCMR(n) (*(((n) < 64) ? \ |
| &__REG2(0x40000100, ((n) & 0x3f) << 2) : \ |
| &__REG2(0x40001100, ((n) & 0x3f) << 2))) |
| |
| #define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ |
| #define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ |
| |
| #define DDADR(x) __REG2(0x40000200, (x) << 4) |
| #define DSADR(x) __REG2(0x40000204, (x) << 4) |
| #define DTADR(x) __REG2(0x40000208, (x) << 4) |
| #define DCMD(x) __REG2(0x4000020c, (x) << 4) |
| |
| #define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ |
| #define DDADR_STOP (1 << 0) /* Stop (read / write) */ |
| |
| #define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ |
| #define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ |
| #define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ |
| #define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ |
| #define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ |
| #define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ |
| #define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ |
| #define DCMD_BURST8 (1 << 16) /* 8 byte burst */ |
| #define DCMD_BURST16 (2 << 16) /* 16 byte burst */ |
| #define DCMD_BURST32 (3 << 16) /* 32 byte burst */ |
| #define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ |
| #define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ |
| #define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ |
| #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ |
| |
| |
| /* |
| * UARTs |
| */ |
| |
| /* Full Function UART (FFUART) */ |
| #define FFUART FFRBR |
| #define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ |
| #define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ |
| #define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ |
| #define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ |
| #define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ |
| #define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ |
| #define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ |
| #define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ |
| #define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ |
| #define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ |
| #define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ |
| #define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ |
| #define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ |
| |
| /* Bluetooth UART (BTUART) */ |
| #define BTUART BTRBR |
| #define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ |
| #define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ |
| #define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ |
| #define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ |
| #define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ |
| #define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ |
| #define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ |
| #define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ |
| #define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ |
| #define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ |
| #define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ |
| #define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ |
| #define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ |
| |
| /* Standard UART (STUART) */ |
| #define STUART STRBR |
| #define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ |
| #define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ |
| #define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ |
| #define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ |
| #define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ |
| #define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ |
| #define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ |
| #define STLSR __REG(0x40700014) /* Line Status Register (read only) */ |
| #define STMSR __REG(0x40700018) /* Reserved */ |
| #define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ |
| #define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ |
| #define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ |
| #define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ |
| |
| /* Hardware UART (HWUART) */ |
| #define HWUART HWRBR |
| #define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */ |
| #define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */ |
| #define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */ |
| #define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */ |
| #define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */ |
| #define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */ |
| #define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */ |
| #define HWLSR __REG(0x41600014) /* Line Status Register (read only) */ |
| #define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */ |
| #define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */ |
| #define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */ |
| #define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */ |
| #define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */ |
| #define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */ |
| #define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ |
| #define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ |
| |
| #define IER_DMAE (1 << 7) /* DMA Requests Enable */ |
| #define IER_UUE (1 << 6) /* UART Unit Enable */ |
| #define IER_NRZE (1 << 5) /* NRZ coding Enable */ |
| #define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ |
| #define IER_MIE (1 << 3) /* Modem Interrupt Enable */ |
| #define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ |
| #define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ |
| #define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ |
| |
| #define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ |
| #define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ |
| #define IIR_TOD (1 << 3) /* Time Out Detected */ |
| #define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ |
| #define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ |
| #define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ |
| |
| #define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ |
| #define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ |
| #define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ |
| #define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ |
| #define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ |
| #define FCR_ITL_1 (0) |
| #define FCR_ITL_8 (FCR_ITL1) |
| #define FCR_ITL_16 (FCR_ITL2) |
| #define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) |
| |
| #define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ |
| #define LCR_SB (1 << 6) /* Set Break */ |
| #define LCR_STKYP (1 << 5) /* Sticky Parity */ |
| #define LCR_EPS (1 << 4) /* Even Parity Select */ |
| #define LCR_PEN (1 << 3) /* Parity Enable */ |
| #define LCR_STB (1 << 2) /* Stop Bit */ |
| #define LCR_WLS1 (1 << 1) /* Word Length Select */ |
| #define LCR_WLS0 (1 << 0) /* Word Length Select */ |
| |
| #define LSR_FIFOE (1 << 7) /* FIFO Error Status */ |
| #define LSR_TEMT (1 << 6) /* Transmitter Empty */ |
| #define LSR_TDRQ (1 << 5) /* Transmit Data Request */ |
| #define LSR_BI (1 << 4) /* Break Interrupt */ |
| #define LSR_FE (1 << 3) /* Framing Error */ |
| #define LSR_PE (1 << 2) /* Parity Error */ |
| #define LSR_OE (1 << 1) /* Overrun Error */ |
| #define LSR_DR (1 << 0) /* Data Ready */ |
| |
| #define MCR_LOOP (1 << 4) |
| #define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ |
| #define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ |
| #define MCR_RTS (1 << 1) /* Request to Send */ |
| #define MCR_DTR (1 << 0) /* Data Terminal Ready */ |
| |
| #define MSR_DCD (1 << 7) /* Data Carrier Detect */ |
| #define MSR_RI (1 << 6) /* Ring Indicator */ |
| #define MSR_DSR (1 << 5) /* Data Set Ready */ |
| #define MSR_CTS (1 << 4) /* Clear To Send */ |
| #define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ |
| #define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ |
| #define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ |
| #define MSR_DCTS (1 << 0) /* Delta Clear To Send */ |
| |
| /* |
| * IrSR (Infrared Selection Register) |
| */ |
| #define STISR_RXPL (1 << 4) /* Receive Data Polarity */ |
| #define STISR_TXPL (1 << 3) /* Transmit Data Polarity */ |
| #define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */ |
| #define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */ |
| #define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */ |
| |
| |
| /* |
| * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c |
| */ |
| |
| /* |
| * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c |
| */ |
| |
| /* |
| * AC97 Controller registers |
| */ |
| |
| #define POCR __REG(0x40500000) /* PCM Out Control Register */ |
| #define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ |
| #define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ |
| |
| #define PICR __REG(0x40500004) /* PCM In Control Register */ |
| #define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ |
| #define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ |
| |
| #define MCCR __REG(0x40500008) /* Mic In Control Register */ |
| #define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ |
| #define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ |
| |
| #define GCR __REG(0x4050000C) /* Global Control Register */ |
| #ifdef CONFIG_PXA3xx |
| #define GCR_CLKBPB (1 << 31) /* Internal clock enable */ |
| #endif |
| #define GCR_nDMAEN (1 << 24) /* non DMA Enable */ |
| #define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ |
| #define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ |
| #define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ |
| #define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */ |
| #define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */ |
| #define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */ |
| #define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */ |
| #define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */ |
| #define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ |
| #define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ |
| |
| #define POSR __REG(0x40500010) /* PCM Out Status Register */ |
| #define POSR_FIFOE (1 << 4) /* FIFO error */ |
| #define POSR_FSR (1 << 2) /* FIFO Service Request */ |
| |
| #define PISR __REG(0x40500014) /* PCM In Status Register */ |
| #define PISR_FIFOE (1 << 4) /* FIFO error */ |
| #define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ |
| #define PISR_FSR (1 << 2) /* FIFO Service Request */ |
| |
| #define MCSR __REG(0x40500018) /* Mic In Status Register */ |
| #define MCSR_FIFOE (1 << 4) /* FIFO error */ |
| #define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ |
| #define MCSR_FSR (1 << 2) /* FIFO Service Request */ |
| |
| #define GSR __REG(0x4050001C) /* Global Status Register */ |
| #define GSR_CDONE (1 << 19) /* Command Done */ |
| #define GSR_SDONE (1 << 18) /* Status Done */ |
| #define GSR_RDCS (1 << 15) /* Read Completion Status */ |
| #define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */ |
| #define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */ |
| #define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */ |
| #define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */ |
| #define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */ |
| #define GSR_SCR (1 << 9) /* Secondary Codec Ready */ |
| #define GSR_PCR (1 << 8) /* Primary Codec Ready */ |
| #define GSR_MCINT (1 << 7) /* Mic In Interrupt */ |
| #define GSR_POINT (1 << 6) /* PCM Out Interrupt */ |
| #define GSR_PIINT (1 << 5) /* PCM In Interrupt */ |
| #define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */ |
| #define GSR_MOINT (1 << 2) /* Modem Out Interrupt */ |
| #define GSR_MIINT (1 << 1) /* Modem In Interrupt */ |
| #define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ |
| |
| #define CAR __REG(0x40500020) /* CODEC Access Register */ |
| #define CAR_CAIP (1 << 0) /* Codec Access In Progress */ |
| |
| #define PCDR __REG(0x40500040) /* PCM FIFO Data Register */ |
| #define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */ |
| |
| #define MOCR __REG(0x40500100) /* Modem Out Control Register */ |
| #define MOCR_FEIE (1 << 3) /* FIFO Error */ |
| #define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ |
| |
| #define MICR __REG(0x40500108) /* Modem In Control Register */ |
| #define MICR_FEIE (1 << 3) /* FIFO Error */ |
| #define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ |
| |
| #define MOSR __REG(0x40500110) /* Modem Out Status Register */ |
| #define MOSR_FIFOE (1 << 4) /* FIFO error */ |
| #define MOSR_FSR (1 << 2) /* FIFO Service Request */ |
| |
| #define MISR __REG(0x40500118) /* Modem In Status Register */ |
| #define MISR_FIFOE (1 << 4) /* FIFO error */ |
| #define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ |
| #define MISR_FSR (1 << 2) /* FIFO Service Request */ |
| |
| #define MODR __REG(0x40500140) /* Modem FIFO Data Register */ |
| |
| #define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */ |
| #define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */ |
| #define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ |
| #define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ |
| |
| |
| /* |
| * Fast Infrared Communication Port |
| */ |
| |
| #define FICP __REG(0x40800000) /* Start of FICP area */ |
| #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ |
| #define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ |
| #define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ |
| #define ICDR __REG(0x4080000c) /* ICP Data Register */ |
| #define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ |
| #define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ |
| |
| #define ICCR0_AME (1 << 7) /* Address match enable */ |
| #define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */ |
| #define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */ |
| #define ICCR0_RXE (1 << 4) /* Receive enable */ |
| #define ICCR0_TXE (1 << 3) /* Transmit enable */ |
| #define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */ |
| #define ICCR0_LBM (1 << 1) /* Loopback mode */ |
| #define ICCR0_ITR (1 << 0) /* IrDA transmission */ |
| |
| #define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */ |
| #define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */ |
| #define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */ |
| #define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */ |
| #define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */ |
| #define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */ |
| |
| #ifdef CONFIG_PXA27x |
| #define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */ |
| #endif |
| #define ICSR0_FRE (1 << 5) /* Framing error */ |
| #define ICSR0_RFS (1 << 4) /* Receive FIFO service request */ |
| #define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */ |
| #define ICSR0_RAB (1 << 2) /* Receiver abort */ |
| #define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */ |
| #define ICSR0_EIF (1 << 0) /* End/Error in FIFO */ |
| |
| #define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */ |
| #define ICSR1_CRE (1 << 5) /* CRC error */ |
| #define ICSR1_EOF (1 << 4) /* End of frame */ |
| #define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */ |
| #define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */ |
| #define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */ |
| #define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */ |
| |
| |
| /* |
| * Real Time Clock |
| */ |
| |
| #define RCNR __REG(0x40900000) /* RTC Count Register */ |
| #define RTAR __REG(0x40900004) /* RTC Alarm Register */ |
| #define RTSR __REG(0x40900008) /* RTC Status Register */ |
| #define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ |
| #define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ |
| |
| #define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ |
| #define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ |
| #define RTSR_HZE (1 << 3) /* HZ interrupt enable */ |
| #define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ |
| #define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ |
| #define RTSR_AL (1 << 0) /* RTC alarm detected */ |
| |
| |
| /* |
| * OS Timer & Match Registers |
| */ |
| |
| #define OSMR0 __REG(0x40A00000) /* */ |
| #define OSMR1 __REG(0x40A00004) /* */ |
| #define OSMR2 __REG(0x40A00008) /* */ |
| #define OSMR3 __REG(0x40A0000C) /* */ |
| #define OSMR4 __REG(0x40A00080) /* */ |
| #define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ |
| #define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ |
| #define OMCR4 __REG(0x40A000C0) /* */ |
| #define OSSR __REG(0x40A00014) /* OS Timer Status Register */ |
| #define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ |
| #define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ |
| |
| #define OSSR_M3 (1 << 3) /* Match status channel 3 */ |
| #define OSSR_M2 (1 << 2) /* Match status channel 2 */ |
| #define OSSR_M1 (1 << 1) /* Match status channel 1 */ |
| #define OSSR_M0 (1 << 0) /* Match status channel 0 */ |
| |
| #define OWER_WME (1 << 0) /* Watchdog Match Enable */ |
| |
| #define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ |
| #define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ |
| #define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ |
| #define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ |
| |
| |
| /* |
| * Pulse Width Modulator |
| */ |
| |
| #define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ |
| #define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ |
| #define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ |
| |
| #define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */ |
| #define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ |
| #define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ |
| |
| |
| /* |
| * Interrupt Controller |
| */ |
| |
| #define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ |
| #define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ |
| #define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ |
| #define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ |
| #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ |
| #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ |
| |
| #define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ |
| #define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ |
| #define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ |
| #define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ |
| #define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ |
| |
| /* |
| * General Purpose I/O |
| */ |
| |
| #define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000)) |
| #define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004)) |
| #define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008)) |
| #define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100)) |
| |
| #define GPLR_OFFSET 0x00 |
| #define GPDR_OFFSET 0x0C |
| #define GPSR_OFFSET 0x18 |
| #define GPCR_OFFSET 0x24 |
| #define GRER_OFFSET 0x30 |
| #define GFER_OFFSET 0x3C |
| #define GEDR_OFFSET 0x48 |
| |
| #define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ |
| #define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ |
| #define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ |
| |
| #define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ |
| #define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ |
| #define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ |
| |
| #define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ |
| #define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ |
| #define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ |
| |
| #define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ |
| #define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ |
| #define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ |
| |
| #define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ |
| #define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ |
| #define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ |
| |
| #define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ |
| #define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ |
| #define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ |
| |
| #define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ |
| #define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ |
| #define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ |
| |
| #define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ |
| #define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ |
| #define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ |
| #define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ |
| #define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ |
| #define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */ |
| #define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ |
| #define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ |
| |
| #define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ |
| #define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ |
| #define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ |
| #define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ |
| #define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ |
| #define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ |
| #define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ |
| |
| /* More handy macros. The argument is a literal GPIO number. */ |
| |
| #define GPIO_bit(x) (1 << ((x) & 0x1f)) |
| |
| #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) |
| |
| /* Interrupt Controller */ |
| |
| #define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) |
| #define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) |
| #define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) |
| #define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) |
| #define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) |
| #define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) |
| #define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) |
| #define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) |
| |
| #define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) |
| #define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) |
| #define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) |
| #define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) |
| #define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) |
| #define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) |
| #define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) |
| #define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ |
| ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) |
| #else |
| |
| #define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) |
| #define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) |
| #define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) |
| #define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) |
| #define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) |
| #define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) |
| #define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) |
| #define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) |
| |
| #endif |
| |
| /* |
| * Power Manager - see pxa2xx-regs.h |
| */ |
| |
| /* |
| * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h |
| */ |
| |
| /* |
| * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h |
| */ |
| |
| /* |
| * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h |
| */ |
| |
| #ifdef CONFIG_PXA27x |
| |
| /* Camera Interface */ |
| #define CICR0 __REG(0x50000000) |
| #define CICR1 __REG(0x50000004) |
| #define CICR2 __REG(0x50000008) |
| #define CICR3 __REG(0x5000000C) |
| #define CICR4 __REG(0x50000010) |
| #define CISR __REG(0x50000014) |
| #define CIFR __REG(0x50000018) |
| #define CITOR __REG(0x5000001C) |
| #define CIBR0 __REG(0x50000028) |
| #define CIBR1 __REG(0x50000030) |
| #define CIBR2 __REG(0x50000038) |
| |
| #define CICR0_DMAEN (1 << 31) /* DMA request enable */ |
| #define CICR0_PAR_EN (1 << 30) /* Parity enable */ |
| #define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */ |
| #define CICR0_ENB (1 << 28) /* Camera interface enable */ |
| #define CICR0_DIS (1 << 27) /* Camera interface disable */ |
| #define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */ |
| #define CICR0_TOM (1 << 9) /* Time-out mask */ |
| #define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */ |
| #define CICR0_FEM (1 << 7) /* FIFO-empty mask */ |
| #define CICR0_EOLM (1 << 6) /* End-of-line mask */ |
| #define CICR0_PERRM (1 << 5) /* Parity-error mask */ |
| #define CICR0_QDM (1 << 4) /* Quick-disable mask */ |
| #define CICR0_CDM (1 << 3) /* Disable-done mask */ |
| #define CICR0_SOFM (1 << 2) /* Start-of-frame mask */ |
| #define CICR0_EOFM (1 << 1) /* End-of-frame mask */ |
| #define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ |
| |
| #define CICR1_TBIT (1 << 31) /* Transparency bit */ |
| #define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */ |
| #define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */ |
| #define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ |
| #define CICR1_RGB_F (1 << 11) /* RGB format */ |
| #define CICR1_YCBCR_F (1 << 10) /* YCbCr format */ |
| #define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */ |
| #define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */ |
| #define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */ |
| #define CICR1_DW (0x7 << 0) /* Data width mask */ |
| |
| #define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock |
| wait count mask */ |
| #define CICR2_ELW (0xff << 16) /* End-of-line pixel clock |
| wait count mask */ |
| #define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */ |
| #define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock |
| wait count mask */ |
| #define CICR2_FSW (0x7 << 0) /* Frame stabilization |
| wait count mask */ |
| |
| #define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock |
| wait count mask */ |
| #define CICR3_EFW (0xff << 16) /* End-of-frame line clock |
| wait count mask */ |
| #define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */ |
| #define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock |
| wait count mask */ |
| #define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */ |
| |
| #define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */ |
| #define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */ |
| #define CICR4_PCP (1 << 22) /* Pixel clock polarity */ |
| #define CICR4_HSP (1 << 21) /* Horizontal sync polarity */ |
| #define CICR4_VSP (1 << 20) /* Vertical sync polarity */ |
| #define CICR4_MCLK_EN (1 << 19) /* MCLK enable */ |
| #define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */ |
| #define CICR4_DIV (0xff << 0) /* Clock divisor mask */ |
| |
| #define CISR_FTO (1 << 15) /* FIFO time-out */ |
| #define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */ |
| #define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */ |
| #define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */ |
| #define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */ |
| #define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */ |
| #define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */ |
| #define CISR_EOL (1 << 8) /* End of line */ |
| #define CISR_PAR_ERR (1 << 7) /* Parity error */ |
| #define CISR_CQD (1 << 6) /* Camera interface quick disable */ |
| #define CISR_CDD (1 << 5) /* Camera interface disable done */ |
| #define CISR_SOF (1 << 4) /* Start of frame */ |
| #define CISR_EOF (1 << 3) /* End of frame */ |
| #define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */ |
| #define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */ |
| #define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */ |
| |
| #define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */ |
| #define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */ |
| #define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */ |
| #define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */ |
| #define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */ |
| #define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */ |
| #define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */ |
| #define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */ |
| |
| #define SRAM_SIZE 0x40000 /* 4x64K */ |
| |
| #define SRAM_MEM_PHYS 0x5C000000 |
| |
| #define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */ |
| #define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */ |
| |
| #define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */ |
| #define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */ |
| #define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */ |
| #define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */ |
| |
| #define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */ |
| #define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */ |
| #define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */ |
| #define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */ |
| |
| #define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */ |
| #define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */ |
| #define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */ |
| #define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */ |
| |
| #define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */ |
| #define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */ |
| #define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */ |
| #define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */ |
| |
| #define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */ |
| #define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */ |
| #define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */ |
| #define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */ |
| |
| #define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */ |
| |
| #define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */ |
| #define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */ |
| #define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */ |
| |
| #define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */ |
| #define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */ |
| #define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */ |
| |
| #define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */ |
| #define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */ |
| #define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */ |
| |
| #define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */ |
| #define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */ |
| #define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */ |
| |
| #endif |
| |
| /* PWRMODE register M field values */ |
| |
| #define PWRMODE_IDLE 0x1 |
| #define PWRMODE_STANDBY 0x2 |
| #define PWRMODE_SLEEP 0x3 |
| #define PWRMODE_DEEPSLEEP 0x7 |
| |
| #endif |