drivers/input/touchscreen/Kconfig - kernel/msm - Gitiles

 #
 # Touchscreen driver configuration
 #
 menuconfig INPUT_TOUCHSCREEN
 	bool "Touchscreens"
 	help
 	  Say Y here, and a list of supported touchscreens will be displayed.
 	  This option doesn't affect the kernel.

 	  If unsure, say Y.

 if INPUT_TOUCHSCREEN

 config TOUCHSCREEN_ADS7846
 	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
 	depends on SPI_MASTER
 	depends on HWMON = n || HWMON
 	help
 	  Say Y here if you have a touchscreen interface using the
 	  ADS7846/TSC2046 or ADS7843 controller, and your board-specific
 	  setup code includes that in its table of SPI devices.

 	  If HWMON is selected, and the driver is told the reference voltage
 	  on your board, you will also get hwmon interfaces for the voltage
 	  (and on ads7846/tsc2046, temperature) sensors of this chip.

 	  If unsure, say N (but it's safe to say "Y").

 	  To compile this driver as a module, choose M here: the
 	  module will be called ads7846.

 config TOUCHSCREEN_AD7877
 	tristate "AD7877 based touchscreens"
 	depends on SPI_MASTER
 	help
 	  Say Y here if you have a touchscreen interface using the
 	  AD7877 controller, and your board-specific initialization
 	  code includes that in its table of SPI devices.

 	  If unsure, say N (but it's safe to say "Y").

 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7877.

 config TOUCHSCREEN_AD7879_I2C
 	tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
 	depends on I2C
 	select TOUCHSCREEN_AD7879
 	help
 	  Say Y here if you have a touchscreen interface using the
 	  AD7879-1 controller, and your board-specific initialization
 	  code includes that in its table of I2C devices.

 	  If unsure, say N (but it's safe to say "Y").

 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7879.

 config TOUCHSCREEN_AD7879_SPI
 	tristate "AD7879 based touchscreens: AD7879 SPI Interface"
 	depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
 	select TOUCHSCREEN_AD7879
 	help
 	  Say Y here if you have a touchscreen interface using the
 	  AD7879 controller, and your board-specific initialization
 	  code includes that in its table of SPI devices.

 	  If unsure, say N (but it's safe to say "Y").

 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7879.

 config TOUCHSCREEN_AD7879
 	tristate
 	default n

 config TOUCHSCREEN_BITSY
 	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
 	depends on SA1100_BITSY
 	select SERIO
 	help
 	  Say Y here if you have the h3600 (Bitsy) touchscreen.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called h3600_ts_input.

 config TOUCHSCREEN_CORGI
 	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
 	depends on PXA_SHARPSL
 	select CORGI_SSP_DEPRECATED
 	default y
 	help
 	  Say Y here to enable the driver for the touchscreen on the
 	  Sharp SL-C7xx and SL-Cxx00 series of PDAs.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called corgi_ts.

 	  NOTE: this driver is deprecated, try enable SPI and generic
 	  ADS7846-based touchscreen driver.

 config TOUCHSCREEN_DA9034
 	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 	depends on PMIC_DA903X
 	default y
 	help
 	  Say Y here to enable the support for the touchscreen found
 	  on Dialog Semiconductor DA9034 PMIC.

 config TOUCHSCREEN_FUJITSU
 	tristate "Fujitsu serial touchscreen"
 	select SERIO
 	help
 	  Say Y here if you have the Fujitsu touchscreen (such as one
 	  installed in Lifebook P series laptop) connected to your
 	  system.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called fujitsu-ts.

 config TOUCHSCREEN_GUNZE
 	tristate "Gunze AHL-51S touchscreen"
 	select SERIO
 	help
 	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
 	  your system.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called gunze.

 config TOUCHSCREEN_ELO
 	tristate "Elo serial touchscreens"
 	select SERIO
 	help
 	  Say Y here if you have an Elo serial touchscreen connected to
 	  your system.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called elo.

 config TOUCHSCREEN_WACOM_W8001
 	tristate "Wacom W8001 penabled serial touchscreen"
 	select SERIO
 	help
 	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
 	  connected to your system.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called wacom_w8001.


 config TOUCHSCREEN_MTOUCH
 	tristate "MicroTouch serial touchscreens"
 	select SERIO
 	help
 	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 	  your system.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called mtouch.

 config TOUCHSCREEN_INEXIO
 	tristate "iNexio serial touchscreens"
 	select SERIO
 	help
 	  Say Y here if you have an iNexio serial touchscreen connected to
 	  your system.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called inexio.

 config TOUCHSCREEN_MK712
 	tristate "ICS MicroClock MK712 touchscreen"
 	help
 	  Say Y here if you have the ICS MicroClock MK712 touchscreen
 	  controller chip in your system.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called mk712.

 config TOUCHSCREEN_HP600
 	tristate "HP Jornada 6xx touchscreen"
 	depends on SH_HP6XX && SH_ADC
 	help
 	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
           support the built-in touchscreen.

 	  To compile this driver as a module, choose M here: the
 	  module will be called hp680_ts_input.

 config TOUCHSCREEN_HP7XX
 	tristate "HP Jornada 7xx touchscreen"
 	depends on SA1100_JORNADA720_SSP
 	help
 	  Say Y here if you have a HP Jornada 710/720/728 and want
 	  to support the built-in touchscreen.

 	  To compile this driver as a module, choose M here: the
 	  module will be called jornada720_ts.

 config TOUCHSCREEN_HTCPEN
 	tristate "HTC Shift X9500 touchscreen"
 	depends on ISA
 	help
 	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 	  Clio / Shangrila and want to support the built-in touchscreen.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called htcpen.

 config TOUCHSCREEN_PENMOUNT
 	tristate "Penmount serial touchscreen"
 	select SERIO
 	help
 	  Say Y here if you have a Penmount serial touchscreen connected to
 	  your system.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called penmount.

 config TOUCHSCREEN_MIGOR
 	tristate "Renesas MIGO-R touchscreen"
 	depends on SH_MIGOR && I2C
 	help
 	  Say Y here to enable MIGO-R touchscreen support.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called migor_ts.

 config TOUCHSCREEN_TOUCHRIGHT
 	tristate "Touchright serial touchscreen"
 	select SERIO
 	help
 	  Say Y here if you have a Touchright serial touchscreen connected to
 	  your system.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called touchright.

 config TOUCHSCREEN_TOUCHWIN
 	tristate "Touchwin serial touchscreen"
 	select SERIO
 	help
 	  Say Y here if you have a Touchwin serial touchscreen connected to
 	  your system.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called touchwin.

 config TOUCHSCREEN_ATMEL_TSADCC
 	tristate "Atmel Touchscreen Interface"
 	depends on ARCH_AT91SAM9RL
 	help
 	  Say Y here if you have a 4-wire touchscreen connected to the
           ADC Controller on your Atmel SoC (such as the AT91SAM9RL).

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called atmel_tsadcc.

 config TOUCHSCREEN_UCB1400
 	tristate "Philips UCB1400 touchscreen"
 	depends on AC97_BUS
 	depends on UCB1400_CORE
 	help
 	  This enables support for the Philips UCB1400 touchscreen interface.
 	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
 	  will be initialized only after the ALSA subsystem has been
 	  brought up and the UCB1400 detected.  You therefore have to
 	  configure ALSA support as well (either built-in or modular,
 	  independently of whether this driver is itself built-in or
 	  modular) for this driver to work.

 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_ts.

 config TOUCHSCREEN_WM97XX
 	tristate "Support for WM97xx AC97 touchscreen controllers"
 	depends on AC97_BUS
 	help
 	  Say Y here if you have a Wolfson Microelectronics WM97xx
 	  touchscreen connected to your system. Note that this option
 	  only enables core driver, you will also need to select
 	  support for appropriate chip below.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called wm97xx-ts.

 config TOUCHSCREEN_WM9705
 	bool "WM9705 Touchscreen interface support"
 	depends on TOUCHSCREEN_WM97XX
 	default y
 	help
 	  Say Y here to enable support for the Wolfson Microelectronics
 	  WM9705 touchscreen controller.

 config TOUCHSCREEN_WM9712
 	bool "WM9712 Touchscreen interface support"
 	depends on TOUCHSCREEN_WM97XX
 	default y
 	help
 	  Say Y here to enable support for the Wolfson Microelectronics
 	  WM9712 touchscreen controller.

 config TOUCHSCREEN_WM9713
 	bool "WM9713 Touchscreen interface support"
 	depends on TOUCHSCREEN_WM97XX
 	default y
 	help
 	  Say Y here to enable support for the Wolfson Microelectronics
 	  WM9713 touchscreen controller.

 config TOUCHSCREEN_WM97XX_MAINSTONE
 	tristate "WM97xx Mainstone accelerated touch"
 	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 	help
 	  Say Y here for support for streaming mode with WM97xx touchscreens
 	  on Mainstone systems.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called mainstone-wm97xx.

 config TOUCHSCREEN_WM97XX_ZYLONITE
 	tristate "Zylonite accelerated touch"
 	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 	select TOUCHSCREEN_WM9713
 	help
 	  Say Y here for support for streaming mode with the touchscreen
 	  on Zylonite systems.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called zylonite-wm97xx.

 config TOUCHSCREEN_USB_COMPOSITE
 	tristate "USB Touchscreen Driver"
 	depends on USB_ARCH_HAS_HCD
 	select USB
 	help
 	  USB Touchscreen driver for:
 	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 	  - PanJit TouchSet USB
 	  - 3M MicroTouch USB (EX II series)
 	  - ITM
 	  - some other eTurboTouch
 	  - Gunze AHL61
 	  - DMC TSC-10/25
 	  - IRTOUCHSYSTEMS/UNITOP
 	  - IdealTEK URTC1000
 	  - GoTop Super_Q2/GogoPen/PenPower tablets

 	  Have a look at <http://linux.chapter7.ch/touchkit/> for
 	  a usage description and the required user-space stuff.

 	  To compile this driver as a module, choose M here: the
 	  module will be called usbtouchscreen.

 config TOUCHSCREEN_USB_EGALAX
 	default y
 	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE

 config TOUCHSCREEN_USB_PANJIT
 	default y
 	bool "PanJit device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE

 config TOUCHSCREEN_USB_3M
 	default y
 	bool "3M/Microtouch EX II series device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE

 config TOUCHSCREEN_USB_ITM
 	default y
 	bool "ITM device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE

 config TOUCHSCREEN_USB_ETURBO
 	default y
 	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE

 config TOUCHSCREEN_USB_GUNZE
 	default y
 	bool "Gunze AHL61 device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE

 config TOUCHSCREEN_USB_DMC_TSC10
 	default y
 	bool "DMC TSC-10/25 device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE

 config TOUCHSCREEN_USB_IRTOUCH
 	default y
 	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE

 config TOUCHSCREEN_USB_IDEALTEK
 	default y
 	bool "IdealTEK URTC1000 device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE

 config TOUCHSCREEN_USB_GENERAL_TOUCH
 	default y
 	bool "GeneralTouch Touchscreen device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE

 config TOUCHSCREEN_USB_GOTOP
 	default y
 	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE

 config TOUCHSCREEN_TOUCHIT213
 	tristate "Sahara TouchIT-213 touchscreen"
 	select SERIO
 	help
 	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called touchit213.

 config TOUCHSCREEN_TSC2007
 	tristate "TSC2007 based touchscreens"
 	depends on I2C
 	help
 	  Say Y here if you have a TSC2007 based touchscreen.

 	  If unsure, say N.

 	  To compile this driver as a module, choose M here: the
 	  module will be called tsc2007.

 endif
	#
	# Touchscreen driver configuration
	#
	menuconfig INPUT_TOUCHSCREEN
	bool "Touchscreens"
	help
	Say Y here, and a list of supported touchscreens will be displayed.
	This option doesn't affect the kernel.

	If unsure, say Y.

	if INPUT_TOUCHSCREEN

	config TOUCHSCREEN_ADS7846
	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
	depends on SPI_MASTER
	depends on HWMON = n \|\| HWMON
	help
	Say Y here if you have a touchscreen interface using the
	ADS7846/TSC2046 or ADS7843 controller, and your board-specific
	setup code includes that in its table of SPI devices.

	If HWMON is selected, and the driver is told the reference voltage
	on your board, you will also get hwmon interfaces for the voltage
	(and on ads7846/tsc2046, temperature) sensors of this chip.

	If unsure, say N (but it's safe to say "Y").

	To compile this driver as a module, choose M here: the
	module will be called ads7846.

	config TOUCHSCREEN_AD7877
	tristate "AD7877 based touchscreens"
	depends on SPI_MASTER
	help
	Say Y here if you have a touchscreen interface using the
	AD7877 controller, and your board-specific initialization
	code includes that in its table of SPI devices.

	If unsure, say N (but it's safe to say "Y").

	To compile this driver as a module, choose M here: the
	module will be called ad7877.

	config TOUCHSCREEN_AD7879_I2C
	tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
	depends on I2C
	select TOUCHSCREEN_AD7879
	help
	Say Y here if you have a touchscreen interface using the
	AD7879-1 controller, and your board-specific initialization
	code includes that in its table of I2C devices.

	If unsure, say N (but it's safe to say "Y").

	To compile this driver as a module, choose M here: the
	module will be called ad7879.

	config TOUCHSCREEN_AD7879_SPI
	tristate "AD7879 based touchscreens: AD7879 SPI Interface"
	depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
	select TOUCHSCREEN_AD7879
	help
	Say Y here if you have a touchscreen interface using the
	AD7879 controller, and your board-specific initialization
	code includes that in its table of SPI devices.

	If unsure, say N (but it's safe to say "Y").

	To compile this driver as a module, choose M here: the
	module will be called ad7879.

	config TOUCHSCREEN_AD7879
	tristate
	default n

	config TOUCHSCREEN_BITSY
	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	depends on SA1100_BITSY
	select SERIO
	help
	Say Y here if you have the h3600 (Bitsy) touchscreen.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called h3600_ts_input.

	config TOUCHSCREEN_CORGI
	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
	depends on PXA_SHARPSL
	select CORGI_SSP_DEPRECATED
	default y
	help
	Say Y here to enable the driver for the touchscreen on the
	Sharp SL-C7xx and SL-Cxx00 series of PDAs.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called corgi_ts.

	NOTE: this driver is deprecated, try enable SPI and generic
	ADS7846-based touchscreen driver.

	config TOUCHSCREEN_DA9034
	tristate "Touchscreen support for Dialog Semiconductor DA9034"
	depends on PMIC_DA903X
	default y
	help
	Say Y here to enable the support for the touchscreen found
	on Dialog Semiconductor DA9034 PMIC.

	config TOUCHSCREEN_FUJITSU
	tristate "Fujitsu serial touchscreen"
	select SERIO
	help
	Say Y here if you have the Fujitsu touchscreen (such as one
	installed in Lifebook P series laptop) connected to your
	system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called fujitsu-ts.

	config TOUCHSCREEN_GUNZE
	tristate "Gunze AHL-51S touchscreen"
	select SERIO
	help
	Say Y here if you have the Gunze AHL-51 touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called gunze.

	config TOUCHSCREEN_ELO
	tristate "Elo serial touchscreens"
	select SERIO
	help
	Say Y here if you have an Elo serial touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called elo.

	config TOUCHSCREEN_WACOM_W8001
	tristate "Wacom W8001 penabled serial touchscreen"
	select SERIO
	help
	Say Y here if you have an Wacom W8001 penabled serial touchscreen
	connected to your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called wacom_w8001.


	config TOUCHSCREEN_MTOUCH
	tristate "MicroTouch serial touchscreens"
	select SERIO
	help
	Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called mtouch.

	config TOUCHSCREEN_INEXIO
	tristate "iNexio serial touchscreens"
	select SERIO
	help
	Say Y here if you have an iNexio serial touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called inexio.

	config TOUCHSCREEN_MK712
	tristate "ICS MicroClock MK712 touchscreen"
	help
	Say Y here if you have the ICS MicroClock MK712 touchscreen
	controller chip in your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called mk712.

	config TOUCHSCREEN_HP600
	tristate "HP Jornada 6xx touchscreen"
	depends on SH_HP6XX && SH_ADC
	help
	Say Y here if you have a HP Jornada 620/660/680/690 and want to
	support the built-in touchscreen.

	To compile this driver as a module, choose M here: the
	module will be called hp680_ts_input.

	config TOUCHSCREEN_HP7XX
	tristate "HP Jornada 7xx touchscreen"
	depends on SA1100_JORNADA720_SSP
	help
	Say Y here if you have a HP Jornada 710/720/728 and want
	to support the built-in touchscreen.

	To compile this driver as a module, choose M here: the
	module will be called jornada720_ts.

	config TOUCHSCREEN_HTCPEN
	tristate "HTC Shift X9500 touchscreen"
	depends on ISA
	help
	Say Y here if you have an HTC Shift UMPC also known as HTC X9500
	Clio / Shangrila and want to support the built-in touchscreen.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called htcpen.

	config TOUCHSCREEN_PENMOUNT
	tristate "Penmount serial touchscreen"
	select SERIO
	help
	Say Y here if you have a Penmount serial touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called penmount.

	config TOUCHSCREEN_MIGOR
	tristate "Renesas MIGO-R touchscreen"
	depends on SH_MIGOR && I2C
	help
	Say Y here to enable MIGO-R touchscreen support.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called migor_ts.

	config TOUCHSCREEN_TOUCHRIGHT
	tristate "Touchright serial touchscreen"
	select SERIO
	help
	Say Y here if you have a Touchright serial touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called touchright.

	config TOUCHSCREEN_TOUCHWIN
	tristate "Touchwin serial touchscreen"
	select SERIO
	help
	Say Y here if you have a Touchwin serial touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called touchwin.

	config TOUCHSCREEN_ATMEL_TSADCC
	tristate "Atmel Touchscreen Interface"
	depends on ARCH_AT91SAM9RL
	help
	Say Y here if you have a 4-wire touchscreen connected to the
	ADC Controller on your Atmel SoC (such as the AT91SAM9RL).

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called atmel_tsadcc.

	config TOUCHSCREEN_UCB1400
	tristate "Philips UCB1400 touchscreen"
	depends on AC97_BUS
	depends on UCB1400_CORE
	help
	This enables support for the Philips UCB1400 touchscreen interface.
	The UCB1400 is an AC97 audio codec. The touchscreen interface
	will be initialized only after the ALSA subsystem has been
	brought up and the UCB1400 detected. You therefore have to
	configure ALSA support as well (either built-in or modular,
	independently of whether this driver is itself built-in or
	modular) for this driver to work.

	To compile this driver as a module, choose M here: the
	module will be called ucb1400_ts.

	config TOUCHSCREEN_WM97XX
	tristate "Support for WM97xx AC97 touchscreen controllers"
	depends on AC97_BUS
	help
	Say Y here if you have a Wolfson Microelectronics WM97xx
	touchscreen connected to your system. Note that this option
	only enables core driver, you will also need to select
	support for appropriate chip below.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called wm97xx-ts.

	config TOUCHSCREEN_WM9705
	bool "WM9705 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	Say Y here to enable support for the Wolfson Microelectronics
	WM9705 touchscreen controller.

	config TOUCHSCREEN_WM9712
	bool "WM9712 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	Say Y here to enable support for the Wolfson Microelectronics
	WM9712 touchscreen controller.

	config TOUCHSCREEN_WM9713
	bool "WM9713 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	Say Y here to enable support for the Wolfson Microelectronics
	WM9713 touchscreen controller.

	config TOUCHSCREEN_WM97XX_MAINSTONE
	tristate "WM97xx Mainstone accelerated touch"
	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
	help
	Say Y here for support for streaming mode with WM97xx touchscreens
	on Mainstone systems.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called mainstone-wm97xx.

	config TOUCHSCREEN_WM97XX_ZYLONITE
	tristate "Zylonite accelerated touch"
	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
	select TOUCHSCREEN_WM9713
	help
	Say Y here for support for streaming mode with the touchscreen
	on Zylonite systems.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called zylonite-wm97xx.

	config TOUCHSCREEN_USB_COMPOSITE
	tristate "USB Touchscreen Driver"
	depends on USB_ARCH_HAS_HCD
	select USB
	help
	USB Touchscreen driver for:
	- eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
	- PanJit TouchSet USB
	- 3M MicroTouch USB (EX II series)
	- ITM
	- some other eTurboTouch
	- Gunze AHL61
	- DMC TSC-10/25
	- IRTOUCHSYSTEMS/UNITOP
	- IdealTEK URTC1000
	- GoTop Super_Q2/GogoPen/PenPower tablets

	Have a look at <http://linux.chapter7.ch/touchkit/> for
	a usage description and the required user-space stuff.

	To compile this driver as a module, choose M here: the
	module will be called usbtouchscreen.

	config TOUCHSCREEN_USB_EGALAX
	default y
	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_PANJIT
	default y
	bool "PanJit device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_3M
	default y
	bool "3M/Microtouch EX II series device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_ITM
	default y
	bool "ITM device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_ETURBO
	default y
	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_GUNZE
	default y
	bool "Gunze AHL61 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_DMC_TSC10
	default y
	bool "DMC TSC-10/25 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_IRTOUCH
	default y
	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_IDEALTEK
	default y
	bool "IdealTEK URTC1000 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_GENERAL_TOUCH
	default y
	bool "GeneralTouch Touchscreen device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_GOTOP
	default y
	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_TOUCHIT213
	tristate "Sahara TouchIT-213 touchscreen"
	select SERIO
	help
	Say Y here if you have a Sahara TouchIT-213 Tablet PC.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called touchit213.

	config TOUCHSCREEN_TSC2007
	tristate "TSC2007 based touchscreens"
	depends on I2C
	help
	Say Y here if you have a TSC2007 based touchscreen.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called tsc2007.

	endif