ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs
Fix HDA beep frequency on IDT 92HD73xx and 92HD71Bxx codecs.
These codecs use the standard beep frequency calculation although the
datasheet says it's linear frequency.
Other IDT/STAC codecs might have the same problem. They should be
fixed individually later.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index f1e7bab..b8d730c 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -202,6 +202,7 @@
unsigned int spdif_mute: 1;
unsigned int check_volume_offset:1;
unsigned int auto_mic:1;
+ unsigned int linear_tone_beep:1;
/* gpio lines */
unsigned int eapd_mask;
@@ -3802,7 +3803,7 @@
return err;
if (codec->beep) {
/* IDT/STAC codecs have linear beep tone parameter */
- codec->beep->linear_tone = 1;
+ codec->beep->linear_tone = spec->linear_tone_beep;
/* if no beep switch is available, make its own one */
caps = query_amp_caps(codec, nid, HDA_OUTPUT);
if (!(caps & AC_AMPCAP_MUTE)) {
@@ -5005,6 +5006,7 @@
codec->no_trigger_sense = 1;
codec->spec = spec;
+ spec->linear_tone_beep = 1;
spec->num_pins = ARRAY_SIZE(stac9200_pin_nids);
spec->pin_nids = stac9200_pin_nids;
spec->board_config = snd_hda_check_board_config(codec, STAC_9200_MODELS,
@@ -5068,6 +5070,7 @@
codec->no_trigger_sense = 1;
codec->spec = spec;
+ spec->linear_tone_beep = 1;
spec->num_pins = ARRAY_SIZE(stac925x_pin_nids);
spec->pin_nids = stac925x_pin_nids;
@@ -5153,6 +5156,7 @@
codec->no_trigger_sense = 1;
codec->spec = spec;
+ spec->linear_tone_beep = 0;
codec->slave_dig_outs = stac92hd73xx_slave_dig_outs;
spec->num_pins = ARRAY_SIZE(stac92hd73xx_pin_nids);
spec->pin_nids = stac92hd73xx_pin_nids;
@@ -5300,6 +5304,7 @@
codec->no_trigger_sense = 1;
codec->spec = spec;
+ spec->linear_tone_beep = 1;
codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs;
spec->digbeep_nid = 0x21;
spec->mux_nids = stac92hd83xxx_mux_nids;
@@ -5522,6 +5527,7 @@
codec->no_trigger_sense = 1;
codec->spec = spec;
+ spec->linear_tone_beep = 0;
codec->patch_ops = stac92xx_patch_ops;
spec->num_pins = STAC92HD71BXX_NUM_PINS;
switch (codec->vendor_id) {
@@ -5779,6 +5785,7 @@
codec->no_trigger_sense = 1;
codec->spec = spec;
+ spec->linear_tone_beep = 1;
spec->num_pins = ARRAY_SIZE(stac922x_pin_nids);
spec->pin_nids = stac922x_pin_nids;
spec->board_config = snd_hda_check_board_config(codec, STAC_922X_MODELS,
@@ -5883,6 +5890,7 @@
codec->no_trigger_sense = 1;
codec->spec = spec;
+ spec->linear_tone_beep = 1;
codec->slave_dig_outs = stac927x_slave_dig_outs;
spec->num_pins = ARRAY_SIZE(stac927x_pin_nids);
spec->pin_nids = stac927x_pin_nids;
@@ -6018,6 +6026,7 @@
codec->no_trigger_sense = 1;
codec->spec = spec;
+ spec->linear_tone_beep = 1;
spec->num_pins = ARRAY_SIZE(stac9205_pin_nids);
spec->pin_nids = stac9205_pin_nids;
spec->board_config = snd_hda_check_board_config(codec, STAC_9205_MODELS,
@@ -6174,6 +6183,7 @@
return -ENOMEM;
codec->no_trigger_sense = 1;
codec->spec = spec;
+ spec->linear_tone_beep = 1;
spec->num_pins = ARRAY_SIZE(stac9872_pin_nids);
spec->pin_nids = stac9872_pin_nids;