ide: use proper printk() KERN_* levels in ide-probe.c
While at it:
- fixup printk() messages in save_match() and hwif_init().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index d227fe4..994e410 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -155,7 +155,8 @@
if (strstr(id->model, "E X A B Y T E N E S T"))
goto err_misc;
- printk("%s: %s, ", drive->name, id->model);
+ printk(KERN_INFO "%s: %s, ", drive->name, id->model);
+
drive->present = 1;
drive->dead = 0;
@@ -164,16 +165,17 @@
*/
if (cmd == WIN_PIDENTIFY) {
u8 type = (id->config >> 8) & 0x1f;
- printk("ATAPI ");
+
+ printk(KERN_CONT "ATAPI ");
switch (type) {
case ide_floppy:
if (!strstr(id->model, "CD-ROM")) {
if (!strstr(id->model, "oppy") &&
!strstr(id->model, "poyp") &&
!strstr(id->model, "ZIP"))
- printk("cdrom or floppy?, assuming ");
+ printk(KERN_CONT "cdrom or floppy?, assuming ");
if (drive->media != ide_cdrom) {
- printk ("FLOPPY");
+ printk(KERN_CONT "FLOPPY");
drive->removable = 1;
break;
}
@@ -186,25 +188,25 @@
/* kludge for Apple PowerBook internal zip */
if (!strstr(id->model, "CD-ROM") &&
strstr(id->model, "ZIP")) {
- printk ("FLOPPY");
+ printk(KERN_CONT "FLOPPY");
type = ide_floppy;
break;
}
#endif
- printk ("CD/DVD-ROM");
+ printk(KERN_CONT "CD/DVD-ROM");
break;
case ide_tape:
- printk ("TAPE");
+ printk(KERN_CONT "TAPE");
break;
case ide_optical:
- printk ("OPTICAL");
+ printk(KERN_CONT "OPTICAL");
drive->removable = 1;
break;
default:
- printk("UNKNOWN (type %d)", type);
+ printk(KERN_CONT "UNKNOWN (type %d)", type);
break;
}
- printk (" drive\n");
+ printk(KERN_CONT " drive\n");
drive->media = type;
/* an ATAPI device ignores DRDY */
drive->ready_stat = 0;
@@ -224,7 +226,9 @@
drive->removable = 1;
drive->media = ide_disk;
- printk("%s DISK drive\n", (id->config == 0x848a) ? "CFA" : "ATA" );
+
+ printk(KERN_CONT "%s DISK drive\n",
+ (id->config == 0x848a) ? "CFA" : "ATA");
return;
@@ -375,7 +379,7 @@
/* Mmmm.. multiple IRQs..
* don't know which was ours
*/
- printk("%s: IRQ probe failed (0x%lx)\n",
+ printk(KERN_ERR "%s: IRQ probe failed (0x%lx)\n",
drive->name, cookie);
}
}
@@ -444,7 +448,7 @@
return 4;
}
#ifdef DEBUG
- printk("probing for %s: present=%d, media=%d, probetype=%s\n",
+ printk(KERN_INFO "probing for %s: present=%d, media=%d, probetype=%s\n",
drive->name, drive->present, drive->media,
(cmd == WIN_IDENTIFY) ? "ATA" : "ATAPI");
#endif
@@ -522,7 +526,8 @@
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
u8 stat;
- printk("%s: enabling %s -- ", hwif->name, drive->id->model);
+ printk(KERN_INFO "%s: enabling %s -- ", hwif->name, drive->id->model);
+
SELECT_DRIVE(drive);
msleep(50);
tp_ops->exec_command(hwif, EXABYTE_ENABLE_NEST);
@@ -871,7 +876,7 @@
if (m && m->hwgroup && m->hwgroup != new->hwgroup) {
if (!new->hwgroup)
return;
- printk("%s: potential irq problem with %s and %s\n",
+ printk(KERN_WARNING "%s: potential IRQ problem with %s and %s\n",
hwif->name, new->name, m->name);
}
if (!m || m->irq != hwif->irq) /* don't undo a prior perfect match */
@@ -1130,17 +1135,17 @@
}
#if !defined(__mc68000__)
- printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
+ printk(KERN_INFO "%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
io_ports->data_addr, io_ports->status_addr,
io_ports->ctl_addr, hwif->irq);
#else
- printk("%s at 0x%08lx on irq %d", hwif->name,
+ printk(KERN_INFO "%s at 0x%08lx on irq %d", hwif->name,
io_ports->data_addr, hwif->irq);
#endif /* __mc68000__ */
if (match)
- printk(" (%sed with %s)",
+ printk(KERN_CONT " (%sed with %s)",
hwif->sharing_irq ? "shar" : "serializ", match->name);
- printk("\n");
+ printk(KERN_CONT "\n");
mutex_unlock(&ide_cfg_mtx);
return 0;
@@ -1275,7 +1280,7 @@
if (!hwif->irq) {
hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
if (!hwif->irq) {
- printk("%s: DISABLED, NO IRQ\n", hwif->name);
+ printk(KERN_ERR "%s: disabled, no IRQ\n", hwif->name);
return 0;
}
}
@@ -1305,16 +1310,16 @@
*/
hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
if (!hwif->irq) {
- printk("%s: Disabled unable to get IRQ %d.\n",
+ printk(KERN_ERR "%s: disabled, unable to get IRQ %d\n",
hwif->name, old_irq);
goto out;
}
if (init_irq(hwif)) {
- printk("%s: probed IRQ %d and default IRQ %d failed.\n",
+ printk(KERN_ERR "%s: probed IRQ %d and default IRQ %d failed\n",
hwif->name, old_irq, hwif->irq);
goto out;
}
- printk("%s: probed IRQ %d failed, using default.\n",
+ printk(KERN_WARNING "%s: probed IRQ %d failed, using default\n",
hwif->name, hwif->irq);
done: