V4L/DVB (11861): saa7134: enable digital tv support for Hauppauge WinTV-HVR1110r3
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 112ff4f..e56934e 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -154,7 +154,7 @@
153 -> Kworld Plus TV Analog Lite PCI [17de:7128]
154 -> Avermedia AVerTV GO 007 FM Plus [1461:f31d]
155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid [0070:6706,0070:6708]
-156 -> Hauppauge WinTV-HVR1110r3 [0070:6707,0070:6709,0070:670a]
+156 -> Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a]
157 -> Avermedia AVerTV Studio 507UA [1461:a11b]
158 -> AVerMedia Cardbus TV/Radio (E501R) [1461:b7e9]
159 -> Beholder BeholdTV 505 RDS [0000:505B]
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 0ba6898..5bcce09 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -44,6 +44,7 @@
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
+ select DVB_TDA10048 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
---help---
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 0eced41..73482eb 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3364,13 +3364,15 @@
},
},
[SAA7134_BOARD_HAUPPAUGE_HVR1110R3] = {
- .name = "Hauppauge WinTV-HVR1110r3",
+ .name = "Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tuner_config = 3,
+ .mpeg = SAA7134_MPEG_DVB,
+ .ts_type = SAA7134_MPEG_TS_SERIAL,
.gpiomask = 0x0800100, /* GPIO 21 is an INPUT */
.inputs = {{
.name = name_tv,
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 4eff1ca..31930f2 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -48,6 +48,7 @@
#include "isl6405.h"
#include "lnbp21.h"
#include "tuner-simple.h"
+#include "tda10048.h"
#include "tda18271.h"
#include "lgdt3305.h"
#include "tda8290.h"
@@ -978,6 +979,18 @@
.vsb_if_khz = 3250,
};
+static struct tda10048_config hcw_tda10048_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_SERIAL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3500,
+ .dtv8_if_freq_khz = TDA10048_IF_4000,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .disable_gate_access = 1,
+};
+
static struct tda18271_std_map hauppauge_tda18271_std_map = {
.atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
.if_lvl = 1, .rfagc_top = 0x58, },
@@ -1106,6 +1119,19 @@
&tda827x_cfg_2) < 0)
goto dettach_frontend;
break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
+ &hcw_tda10048_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &hcw_tda18271_config);
+ }
+ break;
case SAA7134_BOARD_PHILIPS_TIGER:
if (configure_tda827x_fe(dev, &philips_tiger_config,
&tda827x_cfg_0) < 0)