| /* linux/arch/arm/mach-exynos4/setup-sdhci-gpio.c |
| * |
| * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * EXYNOS4 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/card.h> |
| |
| #include <plat/gpio-cfg.h> |
| #include <plat/regs-sdhci.h> |
| #include <plat/sdhci.h> |
| |
| void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) |
| { |
| struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; |
| unsigned int gpio; |
| |
| /* Set all the necessary GPK0[0:1] pins to special-function 2 */ |
| for (gpio = EXYNOS4_GPK0(0); gpio < EXYNOS4_GPK0(2); gpio++) { |
| s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); |
| s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| |
| switch (width) { |
| case 8: |
| for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { |
| /* Data pin GPK1[3:6] to special-funtion 3 */ |
| s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); |
| s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| case 4: |
| for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) { |
| /* Data pin GPK0[3:6] to special-funtion 2 */ |
| s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); |
| s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| default: |
| break; |
| } |
| |
| if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { |
| s3c_gpio_cfgpin(EXYNOS4_GPK0(2), S3C_GPIO_SFN(2)); |
| s3c_gpio_setpull(EXYNOS4_GPK0(2), S3C_GPIO_PULL_UP); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| } |
| |
| void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) |
| { |
| struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; |
| unsigned int gpio; |
| |
| /* Set all the necessary GPK1[0:1] pins to special-function 2 */ |
| for (gpio = EXYNOS4_GPK1(0); gpio < EXYNOS4_GPK1(2); gpio++) { |
| s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); |
| s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| |
| for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { |
| /* Data pin GPK1[3:6] to special-function 2 */ |
| s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); |
| s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| |
| if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { |
| s3c_gpio_cfgpin(EXYNOS4_GPK1(2), S3C_GPIO_SFN(2)); |
| s3c_gpio_setpull(EXYNOS4_GPK1(2), S3C_GPIO_PULL_UP); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| } |
| |
| void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) |
| { |
| struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; |
| unsigned int gpio; |
| |
| /* Set all the necessary GPK2[0:1] pins to special-function 2 */ |
| for (gpio = EXYNOS4_GPK2(0); gpio < EXYNOS4_GPK2(2); gpio++) { |
| s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); |
| s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| |
| switch (width) { |
| case 8: |
| for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) { |
| /* Data pin GPK3[3:6] to special-function 3 */ |
| s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); |
| s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| case 4: |
| for (gpio = EXYNOS4_GPK2(3); gpio <= EXYNOS4_GPK2(6); gpio++) { |
| /* Data pin GPK2[3:6] to special-function 2 */ |
| s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); |
| s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| default: |
| break; |
| } |
| |
| if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { |
| s3c_gpio_cfgpin(EXYNOS4_GPK2(2), S3C_GPIO_SFN(2)); |
| s3c_gpio_setpull(EXYNOS4_GPK2(2), S3C_GPIO_PULL_UP); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| } |
| |
| void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) |
| { |
| struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; |
| unsigned int gpio; |
| |
| /* Set all the necessary GPK3[0:1] pins to special-function 2 */ |
| for (gpio = EXYNOS4_GPK3(0); gpio < EXYNOS4_GPK3(2); gpio++) { |
| s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); |
| s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| |
| for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) { |
| /* Data pin GPK3[3:6] to special-function 2 */ |
| s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); |
| s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| |
| if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { |
| s3c_gpio_cfgpin(EXYNOS4_GPK3(2), S3C_GPIO_SFN(2)); |
| s3c_gpio_setpull(EXYNOS4_GPK3(2), S3C_GPIO_PULL_UP); |
| s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); |
| } |
| } |