| /* |
| * This file is part of wl1251 |
| * |
| * Copyright (c) 1998-2007 Texas Instruments Incorporated |
| * Copyright (C) 2008 Nokia Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/skbuff.h> |
| #include <linux/gfp.h> |
| #include <net/mac80211.h> |
| |
| #include "wl1251.h" |
| #include "reg.h" |
| #include "io.h" |
| #include "rx.h" |
| #include "cmd.h" |
| #include "acx.h" |
| |
| static void wl1251_rx_header(struct wl1251 *wl, |
| struct wl1251_rx_descriptor *desc) |
| { |
| u32 rx_packet_ring_addr; |
| |
| rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr; |
| if (wl->rx_current_buffer) |
| rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size; |
| |
| wl1251_mem_read(wl, rx_packet_ring_addr, desc, sizeof(*desc)); |
| } |
| |
| static void wl1251_rx_status(struct wl1251 *wl, |
| struct wl1251_rx_descriptor *desc, |
| struct ieee80211_rx_status *status, |
| u8 beacon) |
| { |
| u64 mactime; |
| int ret; |
| |
| memset(status, 0, sizeof(struct ieee80211_rx_status)); |
| |
| status->band = IEEE80211_BAND_2GHZ; |
| status->mactime = desc->timestamp; |
| |
| /* |
| * The rx status timestamp is a 32 bits value while the TSF is a |
| * 64 bits one. |
| * For IBSS merging, TSF is mandatory, so we have to get it |
| * somehow, so we ask for ACX_TSF_INFO. |
| * That could be moved to the get_tsf() hook, but unfortunately, |
| * this one must be atomic, while our SPI routines can sleep. |
| */ |
| if ((wl->bss_type == BSS_TYPE_IBSS) && beacon) { |
| ret = wl1251_acx_tsf_info(wl, &mactime); |
| if (ret == 0) |
| status->mactime = mactime; |
| } |
| |
| status->signal = desc->rssi; |
| |
| /* |
| * FIXME: guessing that snr needs to be divided by two, otherwise |
| * the values don't make any sense |
| */ |
| wl->noise = desc->rssi - desc->snr / 2; |
| |
| status->freq = ieee80211_channel_to_frequency(desc->channel, |
| status->band); |
| |
| status->flag |= RX_FLAG_MACTIME_MPDU; |
| |
| if (desc->flags & RX_DESC_ENCRYPTION_MASK) { |
| status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED; |
| |
| if (likely(!(desc->flags & RX_DESC_DECRYPT_FAIL))) |
| status->flag |= RX_FLAG_DECRYPTED; |
| |
| if (unlikely(desc->flags & RX_DESC_MIC_FAIL)) |
| status->flag |= RX_FLAG_MMIC_ERROR; |
| } |
| |
| if (unlikely(!(desc->flags & RX_DESC_VALID_FCS))) |
| status->flag |= RX_FLAG_FAILED_FCS_CRC; |
| |
| switch (desc->rate) { |
| /* skip 1 and 12 Mbps because they have same value 0x0a */ |
| case RATE_2MBPS: |
| status->rate_idx = 1; |
| break; |
| case RATE_5_5MBPS: |
| status->rate_idx = 2; |
| break; |
| case RATE_11MBPS: |
| status->rate_idx = 3; |
| break; |
| case RATE_6MBPS: |
| status->rate_idx = 4; |
| break; |
| case RATE_9MBPS: |
| status->rate_idx = 5; |
| break; |
| case RATE_18MBPS: |
| status->rate_idx = 7; |
| break; |
| case RATE_24MBPS: |
| status->rate_idx = 8; |
| break; |
| case RATE_36MBPS: |
| status->rate_idx = 9; |
| break; |
| case RATE_48MBPS: |
| status->rate_idx = 10; |
| break; |
| case RATE_54MBPS: |
| status->rate_idx = 11; |
| break; |
| } |
| |
| /* for 1 and 12 Mbps we have to check the modulation */ |
| if (desc->rate == RATE_1MBPS) { |
| if (!(desc->mod_pre & OFDM_RATE_BIT)) |
| /* CCK -> RATE_1MBPS */ |
| status->rate_idx = 0; |
| else |
| /* OFDM -> RATE_12MBPS */ |
| status->rate_idx = 6; |
| } |
| |
| if (desc->mod_pre & SHORT_PREAMBLE_BIT) |
| status->flag |= RX_FLAG_SHORTPRE; |
| } |
| |
| static void wl1251_rx_body(struct wl1251 *wl, |
| struct wl1251_rx_descriptor *desc) |
| { |
| struct sk_buff *skb; |
| struct ieee80211_rx_status status; |
| u8 *rx_buffer, beacon = 0; |
| u16 length, *fc; |
| u32 curr_id, last_id_inc, rx_packet_ring_addr; |
| |
| length = WL1251_RX_ALIGN(desc->length - PLCP_HEADER_LENGTH); |
| curr_id = (desc->flags & RX_DESC_SEQNUM_MASK) >> RX_DESC_PACKETID_SHIFT; |
| last_id_inc = (wl->rx_last_id + 1) % (RX_MAX_PACKET_ID + 1); |
| |
| if (last_id_inc != curr_id) { |
| wl1251_warning("curr ID:%d, last ID inc:%d", |
| curr_id, last_id_inc); |
| wl->rx_last_id = curr_id; |
| } else { |
| wl->rx_last_id = last_id_inc; |
| } |
| |
| rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr + |
| sizeof(struct wl1251_rx_descriptor) + 20; |
| if (wl->rx_current_buffer) |
| rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size; |
| |
| skb = __dev_alloc_skb(length, GFP_KERNEL); |
| if (!skb) { |
| wl1251_error("Couldn't allocate RX frame"); |
| return; |
| } |
| |
| rx_buffer = skb_put(skb, length); |
| wl1251_mem_read(wl, rx_packet_ring_addr, rx_buffer, length); |
| |
| /* The actual lenght doesn't include the target's alignment */ |
| skb->len = desc->length - PLCP_HEADER_LENGTH; |
| |
| fc = (u16 *)skb->data; |
| |
| if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON) |
| beacon = 1; |
| |
| wl1251_rx_status(wl, desc, &status, beacon); |
| |
| wl1251_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len, |
| beacon ? "beacon" : ""); |
| |
| memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status)); |
| ieee80211_rx_ni(wl->hw, skb); |
| } |
| |
| static void wl1251_rx_ack(struct wl1251 *wl) |
| { |
| u32 data, addr; |
| |
| if (wl->rx_current_buffer) { |
| addr = ACX_REG_INTERRUPT_TRIG_H; |
| data = INTR_TRIG_RX_PROC1; |
| } else { |
| addr = ACX_REG_INTERRUPT_TRIG; |
| data = INTR_TRIG_RX_PROC0; |
| } |
| |
| wl1251_reg_write32(wl, addr, data); |
| |
| /* Toggle buffer ring */ |
| wl->rx_current_buffer = !wl->rx_current_buffer; |
| } |
| |
| |
| void wl1251_rx(struct wl1251 *wl) |
| { |
| struct wl1251_rx_descriptor *rx_desc; |
| |
| if (wl->state != WL1251_STATE_ON) |
| return; |
| |
| rx_desc = wl->rx_descriptor; |
| |
| /* We first read the frame's header */ |
| wl1251_rx_header(wl, rx_desc); |
| |
| /* Now we can read the body */ |
| wl1251_rx_body(wl, rx_desc); |
| |
| /* Finally, we need to ACK the RX */ |
| wl1251_rx_ack(wl); |
| } |