usb: Fix tusb6010 for DMA API
Commit 18eabe2347ae7a11b3db768695913724166dfb0e introduced
DMA buffer ownership. Fix tusb6010 accordingly. To compile,
also dummy musb_platform_save and restore functions need to
be added.
Also change the order of musb_read_fifo() to happen after
dma_cache_maint to have the DMA operations completed before
moving the remaining unaligned bytes with PIO. The DMA
access and PIO touch different areas of the FIFO, so this
change only makes the code a bit easier to follow.
Tested on n810 and g_ether with variable size ping test.
The test seems to fail for some ping sizes, but that seems to
be a different problem.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 5afa070..c061a88 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -39,7 +39,7 @@
struct tusb_omap_dma *tusb_dma;
- void __iomem *dma_addr;
+ dma_addr_t dma_addr;
u32 len;
u16 packet_sz;
@@ -126,6 +126,7 @@
struct tusb_omap_dma_ch *chdat = to_chdat(channel);
struct tusb_omap_dma *tusb_dma = chdat->tusb_dma;
struct musb *musb = chdat->musb;
+ struct device *dev = musb->controller;
struct musb_hw_ep *hw_ep = chdat->hw_ep;
void __iomem *ep_conf = hw_ep->conf;
void __iomem *mbase = musb->mregs;
@@ -173,13 +174,15 @@
DBG(3, "Using PIO for remaining %lu bytes\n", pio);
buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len;
if (chdat->tx) {
- dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
- chdat->transfer_len, DMA_TO_DEVICE);
+ dma_unmap_single(dev, chdat->dma_addr,
+ chdat->transfer_len,
+ DMA_TO_DEVICE);
musb_write_fifo(hw_ep, pio, buf);
} else {
+ dma_unmap_single(dev, chdat->dma_addr,
+ chdat->transfer_len,
+ DMA_FROM_DEVICE);
musb_read_fifo(hw_ep, pio, buf);
- dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
- chdat->transfer_len, DMA_FROM_DEVICE);
}
channel->actual_len += pio;
}
@@ -224,6 +227,7 @@
struct tusb_omap_dma_ch *chdat = to_chdat(channel);
struct tusb_omap_dma *tusb_dma = chdat->tusb_dma;
struct musb *musb = chdat->musb;
+ struct device *dev = musb->controller;
struct musb_hw_ep *hw_ep = chdat->hw_ep;
void __iomem *mbase = musb->mregs;
void __iomem *ep_conf = hw_ep->conf;
@@ -299,14 +303,16 @@
chdat->packet_sz = packet_sz;
chdat->len = len;
channel->actual_len = 0;
- chdat->dma_addr = (void __iomem *)dma_addr;
+ chdat->dma_addr = dma_addr;
channel->status = MUSB_DMA_STATUS_BUSY;
/* Since we're recycling dma areas, we need to clean or invalidate */
if (chdat->tx)
- dma_cache_maint(phys_to_virt(dma_addr), len, DMA_TO_DEVICE);
+ dma_map_single(dev, phys_to_virt(dma_addr), len,
+ DMA_TO_DEVICE);
else
- dma_cache_maint(phys_to_virt(dma_addr), len, DMA_FROM_DEVICE);
+ dma_map_single(dev, phys_to_virt(dma_addr), len,
+ DMA_FROM_DEVICE);
/* Use 16-bit transfer if dma_addr is not 32-bit aligned */
if ((dma_addr & 0x3) == 0) {