Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/dmfe.txt
new file mode 100644
index 0000000..c0e8398
--- /dev/null
+++ b/Documentation/networking/dmfe.txt
@@ -0,0 +1,59 @@
+ dmfe.c: Version 1.28 01/18/2000
+
+ A Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.
+ Copyright (C) 1997 Sten Wang
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+
+ A. Compiler command:
+
+ A-1: For normal single or multiple processor kernel
+ "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall
+ -Wstrict-prototypes -O6 -c dmfe.c"
+
+ A-2: For single or multiple processor with kernel module version function
+ "gcc -DMODULE -DMODVERSIONS -D__KERNEL__ -I/usr/src/linux/net/inet
+ -Wall -Wstrict-prototypes -O6 -c dmfe.c"
+
+
+ B. The following steps teach you how to activate a DM9102 board:
+
+ 1. Used the upper compiler command to compile dmfe.c
+
+ 2. Insert dmfe module into kernel
+ "insmod dmfe" ;;Auto Detection Mode (Suggest)
+ "insmod dmfe mode=0" ;;Force 10M Half Duplex
+ "insmod dmfe mode=1" ;;Force 100M Half Duplex
+ "insmod dmfe mode=4" ;;Force 10M Full Duplex
+ "insmod dmfe mode=5" ;;Force 100M Full Duplex
+
+ 3. Config a dm9102 network interface
+ "ifconfig eth0 172.22.3.18"
+ ^^^^^^^^^^^ Your IP address
+
+ 4. Activate the IP routing table. For some distributions, it is not
+ necessary. You can type "route" to check.
+
+ "route add default eth0"
+
+
+ 5. Well done. Your DM9102 adapter is now activated.
+
+
+ C. Object files description:
+ 1. dmfe_rh61.o: For Redhat 6.1
+
+ If you can make sure your kernel version, you can rename
+ to dmfe.o and directly use it without re-compiling.
+
+
+ Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw