Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/ppc/boot/utils/mkprep.c b/arch/ppc/boot/utils/mkprep.c
new file mode 100644
index 0000000..f6d5a2f
--- /dev/null
+++ b/arch/ppc/boot/utils/mkprep.c
@@ -0,0 +1,293 @@
+/*
+ * Makes a prep bootable image which can be dd'd onto
+ * a disk device to make a bootdisk. Will take
+ * as input a elf executable, strip off the header
+ * and write out a boot image as:
+ * 1) default - strips elf header
+ * suitable as a network boot image
+ * 2) -pbp - strips elf header and writes out prep boot partition image
+ * cat or dd onto disk for booting
+ * 3) -asm - strips elf header and writes out as asm data
+ * useful for generating data for a compressed image
+ * -- Cort
+ *
+ * Modified for x86 hosted builds by Matt Porter <porter@neta.com>
+ * Modified for Sparc hosted builds by Peter Wahl <PeterWahl@web.de>
+ */
+
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <strings.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+#define cpu_to_le32(x) le32_to_cpu((x))
+unsigned long le32_to_cpu(unsigned long x)
+{
+ return (((x & 0x000000ffU) << 24) |
+ ((x & 0x0000ff00U) << 8) |
+ ((x & 0x00ff0000U) >> 8) |
+ ((x & 0xff000000U) >> 24));
+}
+
+
+#define cpu_to_le16(x) le16_to_cpu((x))
+unsigned short le16_to_cpu(unsigned short x)
+{
+ return (((x & 0x00ff) << 8) |
+ ((x & 0xff00) >> 8));
+}
+
+#define cpu_to_be32(x) (x)
+#define be32_to_cpu(x) (x)
+#define cpu_to_be16(x) (x)
+#define be16_to_cpu(x) (x)
+
+/* size of read buffer */
+#define SIZE 0x1000
+
+
+typedef unsigned long dword_t;
+typedef unsigned short word_t;
+typedef unsigned char byte_t;
+typedef byte_t block_t[512];
+typedef byte_t page_t[4096];
+
+
+/*
+ * Partition table entry
+ * - from the PReP spec
+ */
+typedef struct partition_entry {
+ byte_t boot_indicator;
+ byte_t starting_head;
+ byte_t starting_sector;
+ byte_t starting_cylinder;
+
+ byte_t system_indicator;
+ byte_t ending_head;
+ byte_t ending_sector;
+ byte_t ending_cylinder;
+
+ dword_t beginning_sector;
+ dword_t number_of_sectors;
+} partition_entry_t;
+
+#define BootActive 0x80
+#define SystemPrep 0x41
+
+void copy_image(int , int);
+void write_prep_partition(int , int );
+void write_asm_data( int in, int out );
+
+unsigned int elfhdr_size = 65536;
+
+int main(int argc, char *argv[])
+{
+ int in_fd, out_fd;
+ int argptr = 1;
+ unsigned int prep = 0;
+ unsigned int asmoutput = 0;
+
+ if ( (argc < 3) || (argc > 4) )
+ {
+ fprintf(stderr, "usage: %s [-pbp] [-asm] <boot-file> <image>\n",argv[0]);
+ exit(-1);
+ }
+
+ /* needs to handle args more elegantly -- but this is a small/simple program */
+
+ /* check for -pbp */
+ if ( !strcmp( argv[argptr], "-pbp" ) )
+ {
+ prep = 1;
+ argptr++;
+ }
+
+ /* check for -asm */
+ if ( !strcmp( argv[argptr], "-asm" ) )
+ {
+ asmoutput = 1;
+ argptr++;
+ }
+
+ /* input file */
+ if ( !strcmp( argv[argptr], "-" ) )
+ in_fd = 0; /* stdin */
+ else
+ if ((in_fd = open( argv[argptr] , 0)) < 0)
+ exit(-1);
+ argptr++;
+
+ /* output file */
+ if ( !strcmp( argv[argptr], "-" ) )
+ out_fd = 1; /* stdout */
+ else
+ if ((out_fd = creat( argv[argptr] , 0755)) < 0)
+ exit(-1);
+ argptr++;
+
+ /* skip elf header in input file */
+ /*if ( !prep )*/
+ lseek(in_fd, elfhdr_size, SEEK_SET);
+
+ /* write prep partition if necessary */
+ if ( prep )
+ write_prep_partition( in_fd, out_fd );
+
+ /* write input image to bootimage */
+ if ( asmoutput )
+ write_asm_data( in_fd, out_fd );
+ else
+ copy_image(in_fd, out_fd);
+
+ return 0;
+}
+
+void write_prep_partition(int in, int out)
+{
+ unsigned char block[512];
+ partition_entry_t pe;
+ dword_t *entry = (dword_t *)&block[0];
+ dword_t *length = (dword_t *)&block[sizeof(long)];
+ struct stat info;
+
+ if (fstat(in, &info) < 0)
+ {
+ fprintf(stderr,"info failed\n");
+ exit(-1);
+ }
+
+ bzero( block, sizeof block );
+
+ /* set entry point and boot image size skipping over elf header */
+#ifdef __i386__
+ *entry = 0x400/*+65536*/;
+ *length = info.st_size-elfhdr_size+0x400;
+#else
+ *entry = cpu_to_le32(0x400/*+65536*/);
+ *length = cpu_to_le32(info.st_size-elfhdr_size+0x400);
+#endif /* __i386__ */
+
+ /* sets magic number for msdos partition (used by linux) */
+ block[510] = 0x55;
+ block[511] = 0xAA;
+
+ /*
+ * Build a "PReP" partition table entry in the boot record
+ * - "PReP" may only look at the system_indicator
+ */
+ pe.boot_indicator = BootActive;
+ pe.system_indicator = SystemPrep;
+ /*
+ * The first block of the diskette is used by this "boot record" which
+ * actually contains the partition table. (The first block of the
+ * partition contains the boot image, but I digress...) We'll set up
+ * one partition on the diskette and it shall contain the rest of the
+ * diskette.
+ */
+ pe.starting_head = 0; /* zero-based */
+ pe.starting_sector = 2; /* one-based */
+ pe.starting_cylinder = 0; /* zero-based */
+ pe.ending_head = 1; /* assumes two heads */
+ pe.ending_sector = 18; /* assumes 18 sectors/track */
+ pe.ending_cylinder = 79; /* assumes 80 cylinders/diskette */
+
+ /*
+ * The "PReP" software ignores the above fields and just looks at
+ * the next two.
+ * - size of the diskette is (assumed to be)
+ * (2 tracks/cylinder)(18 sectors/tracks)(80 cylinders/diskette)
+ * - unlike the above sector numbers, the beginning sector is zero-based!
+ */
+#if 0
+ pe.beginning_sector = cpu_to_le32(1);
+#else
+ /* This has to be 0 on the PowerStack? */
+#ifdef __i386__
+ pe.beginning_sector = 0;
+#else
+ pe.beginning_sector = cpu_to_le32(0);
+#endif /* __i386__ */
+#endif
+
+#ifdef __i386__
+ pe.number_of_sectors = 2*18*80-1;
+#else
+ pe.number_of_sectors = cpu_to_le32(2*18*80-1);
+#endif /* __i386__ */
+
+ memcpy(&block[0x1BE], &pe, sizeof(pe));
+
+ write( out, block, sizeof(block) );
+ write( out, entry, sizeof(*entry) );
+ write( out, length, sizeof(*length) );
+ /* set file position to 2nd sector where image will be written */
+ lseek( out, 0x400, SEEK_SET );
+}
+
+
+
+void
+copy_image(int in, int out)
+{
+ char buf[SIZE];
+ int n;
+
+ while ( (n = read(in, buf, SIZE)) > 0 )
+ write(out, buf, n);
+}
+
+
+void
+write_asm_data( int in, int out )
+{
+ int i, cnt, pos, len;
+ unsigned int cksum, val;
+ unsigned char *lp;
+ unsigned char buf[SIZE];
+ unsigned char str[256];
+
+ write( out, "\t.data\n\t.globl input_data\ninput_data:\n",
+ strlen( "\t.data\n\t.globl input_data\ninput_data:\n" ) );
+ pos = 0;
+ cksum = 0;
+ while ((len = read(in, buf, sizeof(buf))) > 0)
+ {
+ cnt = 0;
+ lp = (unsigned char *)buf;
+ len = (len + 3) & ~3; /* Round up to longwords */
+ for (i = 0; i < len; i += 4)
+ {
+ if (cnt == 0)
+ {
+ write( out, "\t.long\t", strlen( "\t.long\t" ) );
+ }
+ sprintf( str, "0x%02X%02X%02X%02X", lp[0], lp[1], lp[2], lp[3]);
+ write( out, str, strlen(str) );
+ val = *(unsigned long *)lp;
+ cksum ^= val;
+ lp += 4;
+ if (++cnt == 4)
+ {
+ cnt = 0;
+ sprintf( str, " # %x \n", pos+i-12);
+ write( out, str, strlen(str) );
+ } else
+ {
+ write( out, ",", 1 );
+ }
+ }
+ if (cnt)
+ {
+ write( out, "0\n", 2 );
+ }
+ pos += len;
+ }
+ sprintf(str, "\t.globl input_len\ninput_len:\t.long\t0x%x\n", pos);
+ write( out, str, strlen(str) );
+
+ fprintf(stderr, "cksum = %x\n", cksum);
+}