Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/char/rio/linux_compat.h b/drivers/char/rio/linux_compat.h
new file mode 100644
index 0000000..d53843a
--- /dev/null
+++ b/drivers/char/rio/linux_compat.h
@@ -0,0 +1,122 @@
+/*
+ * (C) 2000 R.E.Wolff@BitWizard.nl
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/interrupt.h>
+
+
+#define disable(oldspl) save_flags (oldspl)
+#define restore(oldspl) restore_flags (oldspl)
+
+#define sysbrk(x) kmalloc ((x),in_interrupt()? GFP_ATOMIC : GFP_KERNEL)
+#define sysfree(p,size) kfree ((p))
+
+#define WBYTE(p,v) writeb(v, &p)
+#define RBYTE(p) readb (&p)
+#define WWORD(p,v) writew(v, &p)
+#define RWORD(p) readw(&p)
+#define WINDW(p,v) writew(v, p)
+#define RINDW(p) readw(p)
+
+#define DEBUG_ALL
+
+#define cprintf printk
+
+#ifdef __KERNEL__
+#define INKERNEL
+#endif
+
+struct ttystatics {
+ struct termios tm;
+};
+
+#define bzero(d, n) memset((d), 0, (n))
+#define bcopy(src, dest, n) memcpy ((dest), (src), (n))
+
+#define SEM_SIGIGNORE 0x1234
+
+#ifdef DEBUG_SEM
+#define swait(a,b) printk ("waiting: " __FILE__ " line %d\n", __LINE__)
+#define ssignal(sem) printk ("signalling: " __FILE__ " line %d\n", __LINE__)
+
+#define sreset(sem) printk ("sreset: " __FILE__ "\n")
+#define sem_init(sem,v) printk ("sreset: " __FILE__ "\n")
+#endif
+
+
+#define getpid() (current->pid)
+
+#define QSIZE SERIAL_XMIT_SIZE
+
+#define pseterr(errno) return (- errno)
+
+#define V_CBAUD CBAUD
+
+/* For one reason or another rioboot.c uses delay instead of RIODelay. */
+#define delay(x,y) RIODelay(NULL, y)
+
+extern int rio_debug;
+
+#define RIO_DEBUG_INIT 0x000001
+#define RIO_DEBUG_BOOT 0x000002
+#define RIO_DEBUG_CMD 0x000004
+#define RIO_DEBUG_CTRL 0x000008
+#define RIO_DEBUG_INTR 0x000010
+#define RIO_DEBUG_PARAM 0x000020
+#define RIO_DEBUG_ROUTE 0x000040
+#define RIO_DEBUG_TABLE 0x000080
+#define RIO_DEBUG_TTY 0x000100
+#define RIO_DEBUG_FLOW 0x000200
+#define RIO_DEBUG_MODEMSIGNALS 0x000400
+#define RIO_DEBUG_PROBE 0x000800
+#define RIO_DEBUG_CLEANUP 0x001000
+#define RIO_DEBUG_IFLOW 0x002000
+#define RIO_DEBUG_PFE 0x004000
+#define RIO_DEBUG_REC 0x008000
+#define RIO_DEBUG_SPINLOCK 0x010000
+#define RIO_DEBUG_DELAY 0x020000
+#define RIO_DEBUG_MOD_COUNT 0x040000
+
+/* Copied over from riowinif.h . This is ugly. The winif file declares
+also much other stuff which is incompatible with the headers from
+the older driver. The older driver includes "brates.h" which shadows
+the definitions from Linux, and is incompatible... */
+
+/* RxBaud and TxBaud definitions... */
+#define RIO_B0 0x00 /* RTS / DTR signals dropped */
+#define RIO_B50 0x01 /* 50 baud */
+#define RIO_B75 0x02 /* 75 baud */
+#define RIO_B110 0x03 /* 110 baud */
+#define RIO_B134 0x04 /* 134.5 baud */
+#define RIO_B150 0x05 /* 150 baud */
+#define RIO_B200 0x06 /* 200 baud */
+#define RIO_B300 0x07 /* 300 baud */
+#define RIO_B600 0x08 /* 600 baud */
+#define RIO_B1200 0x09 /* 1200 baud */
+#define RIO_B1800 0x0A /* 1800 baud */
+#define RIO_B2400 0x0B /* 2400 baud */
+#define RIO_B4800 0x0C /* 4800 baud */
+#define RIO_B9600 0x0D /* 9600 baud */
+#define RIO_B19200 0x0E /* 19200 baud */
+#define RIO_B38400 0x0F /* 38400 baud */
+#define RIO_B56000 0x10 /* 56000 baud */
+#define RIO_B57600 0x11 /* 57600 baud */
+#define RIO_B64000 0x12 /* 64000 baud */
+#define RIO_B115200 0x13 /* 115200 baud */
+#define RIO_B2000 0x14 /* 2000 baud */
+
+