Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
new file mode 100644
index 0000000..e55dee3
--- /dev/null
+++ b/drivers/input/keyboard/Kconfig
@@ -0,0 +1,185 @@
+#
+# Input core configuration
+#
+menuconfig INPUT_KEYBOARD
+ bool "Keyboards" if EMBEDDED || !X86
+ default y
+ help
+ Say Y here, and a list of supported keyboards will be displayed.
+ This option doesn't affect the kernel.
+
+ If unsure, say Y.
+
+if INPUT_KEYBOARD
+
+config KEYBOARD_ATKBD
+ tristate "AT keyboard" if !PC
+ default y
+ select SERIO
+ select SERIO_LIBPS2
+ select SERIO_I8042 if PC
+ select SERIO_GSCPS2 if GSC
+ help
+ Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
+ you'll need this, unless you have a different type keyboard (USB, ADB
+ or other). This also works for AT and PS/2 keyboards connected over a
+ PS/2 to serial converter.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atkbd.
+
+config KEYBOARD_ATKBD_HP_KEYCODES
+ bool "Use HP keyboard scancodes"
+ depends on PARISC && KEYBOARD_ATKBD
+ default y
+ help
+ Say Y here if you have a PA-RISC machine and want to use an AT or
+ PS/2 keyboard, and your keyboard uses keycodes that are specific to
+ PA-RISC keyboards.
+
+ Say N if you use a standard keyboard.
+
+config KEYBOARD_ATKBD_RDI_KEYCODES
+ bool "Use PrecisionBook keyboard scancodes"
+ depends on KEYBOARD_ATKBD_HP_KEYCODES
+ default n
+ help
+ If you have an RDI PrecisionBook, say Y here if you want to use its
+ built-in keyboard (as opposed to an external keyboard).
+
+ The PrecisionBook has five keys that conflict with those used by most
+ AT and PS/2 keyboards. These are as follows:
+
+ PrecisionBook Standard AT or PS/2
+
+ F1 F12
+ Left Ctrl Left Alt
+ Caps Lock Left Ctrl
+ Right Ctrl Caps Lock
+ Left 102nd key (the key to the right of Left Shift)
+
+ If you say N here, and use the PrecisionBook keyboard, then each key
+ in the left-hand column will be interpreted as the corresponding key
+ in the right-hand column.
+
+ If you say Y here, and use an external keyboard, then each key in the
+ right-hand column will be interpreted as the key shown in the
+ left-hand column.
+
+config KEYBOARD_SUNKBD
+ tristate "Sun Type 4 and Type 5 keyboard"
+ select SERIO
+ help
+ Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
+ connected either to the Sun keyboard connector or to an serial
+ (RS-232) port via a simple adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sunkbd.
+
+config KEYBOARD_LKKBD
+ tristate "DECstation/VAXstation LK201/LK401 keyboard"
+ select SERIO
+ help
+ Say Y here if you want to use a LK201 or LK401 style serial
+ keyboard. This keyboard is also useable on PCs if you attach
+ it with the inputattach program. The connector pinout is
+ described within lkkbd.c.
+
+ To compile this driver as a module, choose M here: the
+ module will be called lkkbd.
+
+config KEYBOARD_LOCOMO
+ tristate "LoCoMo Keyboard Support"
+ depends on SHARP_LOCOMO
+ help
+ Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
+
+ To compile this driver as a module, choose M here: the
+ module will be called locomokbd.
+
+config KEYBOARD_XTKBD
+ tristate "XT keyboard"
+ select SERIO
+ help
+ Say Y here if you want to use the old IBM PC/XT keyboard (or
+ compatible) on your system. This is only possible with a
+ parallel port keyboard adapter, you cannot connect it to the
+ keyboard port on a PC that runs Linux.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xtkbd.
+
+config KEYBOARD_NEWTON
+ tristate "Newton keyboard"
+ select SERIO
+ help
+ Say Y here if you have a Newton keyboard on a serial port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called newtonkbd.
+
+config KEYBOARD_CORGI
+ tristate "Corgi keyboard"
+ depends on PXA_SHARPSL
+ default y
+ help
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
+ series of PDAs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called corgikbd.
+
+config KEYBOARD_MAPLE
+ tristate "Maple bus keyboard"
+ depends on SH_DREAMCAST && MAPLE
+ help
+ Say Y here if you have a DreamCast console running Linux and have
+ a keyboard attached to its Maple bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called maple_keyb.
+
+config KEYBOARD_AMIGA
+ tristate "Amiga keyboard"
+ depends on AMIGA
+ help
+ Say Y here if you are running Linux on any AMIGA and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called amikbd.
+
+config KEYBOARD_HIL_OLD
+ tristate "HP HIL keyboard support (simple driver)"
+ depends on GSC
+ default y
+ help
+ The "Human Interface Loop" is a older, 8-channel USB-like
+ controller used in several Hewlett Packard models. This driver
+ was adapted from the one written for m68k/hp300, and implements
+ support for a keyboard attached to the HIL port, but not for
+ any other types of HIL input devices like mice or tablets.
+ However, it has been thoroughly tested and is stable.
+
+ If you want full HIL support including support for multiple
+ keyboards, mices and tablets, you have to enable the
+ "HP System Device Controller i8042 Support" in the input/serio
+ submenu.
+
+config KEYBOARD_HIL
+ tristate "HP HIL keyboard support"
+ depends on GSC
+ default y
+ select HP_SDC
+ select HIL_MLC
+ select SERIO
+ help
+ The "Human Interface Loop" is a older, 8-channel USB-like
+ controller used in several Hewlett Packard models.
+ This driver implements support for HIL-keyboards attached
+ to your machine, so normally you should say Y here.
+
+endif