Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
new file mode 100644
index 0000000..14e9632
--- /dev/null
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -0,0 +1,1014 @@
+/*
+ * budget-av.c: driver for the SAA7146 based Budget DVB cards
+ *              with analog video in
+ *
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ *
+ * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
+ *                               Andrew de Quincey <adq_dvb@lidskialf.net>
+ *
+ * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
+ *
+ * Copyright (C) 1999-2002 Ralph  Metzler
+ *                       & Marcus Metzler for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org/dvb/
+ */
+
+#include "budget.h"
+#include "stv0299.h"
+#include "tda10021.h"
+#include "tda1004x.h"
+#include <media/saa7146_vv.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/spinlock.h>
+
+#include "dvb_ca_en50221.h"
+
+#define DEBICICAM		0x02420000
+
+struct budget_av {
+	struct budget budget;
+	struct video_device *vd;
+	int cur_input;
+	int has_saa7113;
+	struct tasklet_struct ciintf_irq_tasklet;
+	int slot_status;
+	struct dvb_ca_en50221 ca;
+};
+
+static int enable_ci = 0;
+
+
+/****************************************************************************
+ * INITIALIZATION
+ ****************************************************************************/
+
+static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg)
+{
+	u8 mm1[] = { 0x00 };
+	u8 mm2[] = { 0x00 };
+	struct i2c_msg msgs[2];
+
+	msgs[0].flags = 0;
+	msgs[1].flags = I2C_M_RD;
+	msgs[0].addr = msgs[1].addr = id / 2;
+	mm1[0] = reg;
+	msgs[0].len = 1;
+	msgs[1].len = 1;
+	msgs[0].buf = mm1;
+	msgs[1].buf = mm2;
+
+	i2c_transfer(i2c, msgs, 2);
+
+	return mm2[0];
+}
+
+static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len)
+{
+	u8 mm1[] = { reg };
+	struct i2c_msg msgs[2] = {
+		{.addr = id / 2,.flags = 0,.buf = mm1,.len = 1},
+		{.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len}
+	};
+
+	if (i2c_transfer(i2c, msgs, 2) != 2)
+		return -EIO;
+
+	return 0;
+}
+
+static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val)
+{
+	u8 msg[2] = { reg, val };
+	struct i2c_msg msgs;
+
+	msgs.flags = 0;
+	msgs.addr = id / 2;
+	msgs.len = 2;
+	msgs.buf = msg;
+	return i2c_transfer(i2c, &msgs, 1);
+}
+
+static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	int result;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
+	udelay(1);
+
+	result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 0);
+
+	if (result == -ETIMEDOUT)
+		budget_av->slot_status = 0;
+	return result;
+}
+
+static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	int result;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
+	udelay(1);
+
+	result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 0);
+
+	if (result == -ETIMEDOUT)
+		budget_av->slot_status = 0;
+	return result;
+}
+
+static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	int result;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+	udelay(1);
+
+	result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
+
+	if (result == -ETIMEDOUT)
+		budget_av->slot_status = 0;
+	return result;
+}
+
+static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	int result;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+	udelay(1);
+
+	result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
+
+	if (result == -ETIMEDOUT)
+		budget_av->slot_status = 0;
+	return result;
+}
+
+static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	struct saa7146_dev *saa = budget_av->budget.dev;
+	int max = 20;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	dprintk(1, "ciintf_slot_reset\n");
+
+	/* reset the card */
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
+	msleep(100);
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+
+	while (--max > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
+		msleep(100);
+
+	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+	return 0;
+}
+
+static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	struct saa7146_dev *saa = budget_av->budget.dev;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	dprintk(1, "ciintf_slot_shutdown\n");
+
+	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+	budget_av->slot_status = 0;
+	return 0;
+}
+
+static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	struct saa7146_dev *saa = budget_av->budget.dev;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
+
+	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
+	return 0;
+}
+
+static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	struct saa7146_dev *saa = budget_av->budget.dev;
+	int cam = 0;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	if (!budget_av->slot_status) {
+		saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
+		udelay(1);
+		cam = saa7146_read(saa, PSR) & MASK_06;
+		saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
+
+		if (cam)
+			budget_av->slot_status = 1;
+	} else if (!open) {
+		saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+		if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
+			budget_av->slot_status = 0;
+	}
+
+	if (budget_av->slot_status == 1)
+		return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+
+	return 0;
+}
+
+static int ciintf_init(struct budget_av *budget_av)
+{
+	struct saa7146_dev *saa = budget_av->budget.dev;
+	int result;
+
+	memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
+
+	/* setup GPIOs */
+	saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
+	saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
+	saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
+
+	/* Reset the card */
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
+	msleep(50);
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+	msleep(100);
+
+	/* Enable DEBI pins */
+	saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
+
+	/* register CI interface */
+	budget_av->ca.owner = THIS_MODULE;
+	budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem;
+	budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem;
+	budget_av->ca.read_cam_control = ciintf_read_cam_control;
+	budget_av->ca.write_cam_control = ciintf_write_cam_control;
+	budget_av->ca.slot_reset = ciintf_slot_reset;
+	budget_av->ca.slot_shutdown = ciintf_slot_shutdown;
+	budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
+	budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
+	budget_av->ca.data = budget_av;
+	if ((result = dvb_ca_en50221_init(budget_av->budget.dvb_adapter,
+					  &budget_av->ca, 0, 1)) != 0) {
+		printk("budget_av: CI interface detected, but initialisation failed.\n");
+		goto error;
+	}
+	// success!
+	printk("ciintf_init: CI interface initialised\n");
+	budget_av->budget.ci_present = 1;
+	return 0;
+
+error:
+	saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+	return result;
+}
+
+static void ciintf_deinit(struct budget_av *budget_av)
+{
+	struct saa7146_dev *saa = budget_av->budget.dev;
+
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
+	saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
+	saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
+	saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
+
+	/* release the CA device */
+	dvb_ca_en50221_release(&budget_av->ca);
+
+	/* disable DEBI pins */
+	saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+}
+
+
+static const u8 saa7113_tab[] = {
+	0x01, 0x08,
+	0x02, 0xc0,
+	0x03, 0x33,
+	0x04, 0x00,
+	0x05, 0x00,
+	0x06, 0xeb,
+	0x07, 0xe0,
+	0x08, 0x28,
+	0x09, 0x00,
+	0x0a, 0x80,
+	0x0b, 0x47,
+	0x0c, 0x40,
+	0x0d, 0x00,
+	0x0e, 0x01,
+	0x0f, 0x44,
+
+	0x10, 0x08,
+	0x11, 0x0c,
+	0x12, 0x7b,
+	0x13, 0x00,
+	0x15, 0x00, 0x16, 0x00, 0x17, 0x00,
+
+	0x57, 0xff,
+	0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07,
+	0x5b, 0x83, 0x5e, 0x00,
+	0xff
+};
+
+static int saa7113_init(struct budget_av *budget_av)
+{
+	struct budget *budget = &budget_av->budget;
+	const u8 *data = saa7113_tab;
+
+	if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
+		dprintk(1, "saa7113 not found on KNC card\n");
+		return -ENODEV;
+	}
+
+	dprintk(1, "saa7113 detected and initializing\n");
+
+	while (*data != 0xff) {
+		i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1));
+		data += 2;
+	}
+
+	dprintk(1, "saa7113  status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f));
+
+	return 0;
+}
+
+static int saa7113_setinput(struct budget_av *budget_av, int input)
+{
+	struct budget *budget = &budget_av->budget;
+
+	if (1 != budget_av->has_saa7113)
+		return -ENODEV;
+
+	if (input == 1) {
+		i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7);
+		i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80);
+	} else if (input == 0) {
+		i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0);
+		i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00);
+	} else
+		return -EINVAL;
+
+	budget_av->cur_input = input;
+	return 0;
+}
+
+
+static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+	u8 m1;
+
+	aclk = 0xb5;
+	if (srate < 2000000)
+		bclk = 0x86;
+	else if (srate < 5000000)
+		bclk = 0x89;
+	else if (srate < 15000000)
+		bclk = 0x8f;
+	else if (srate < 45000000)
+		bclk = 0x95;
+
+	m1 = 0x14;
+	if (srate < 4000000)
+		m1 = 0x10;
+
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+	stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+	stv0299_writereg(fe, 0x0f, 0x80 | m1);
+
+	return 0;
+}
+
+static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe,
+					struct dvb_frontend_parameters *params)
+{
+	struct budget_av *budget_av = (struct budget_av *) fe->dvb->priv;
+	u32 div;
+	u8 buf[4];
+	struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
+
+	if ((params->frequency < 950000) || (params->frequency > 2150000))
+		return -EINVAL;
+
+	div = (params->frequency + (125 - 1)) / 125;	// round correctly
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+	buf[3] = 0x20;
+
+	if (params->u.qpsk.symbol_rate < 4000000)
+		buf[3] |= 1;
+
+	if (params->frequency < 1250000)
+		buf[3] |= 0;
+	else if (params->frequency < 1550000)
+		buf[3] |= 0x40;
+	else if (params->frequency < 2050000)
+		buf[3] |= 0x80;
+	else if (params->frequency < 2150000)
+		buf[3] |= 0xC0;
+
+	if (i2c_transfer(&budget_av->budget.i2c_adap, &msg, 1) != 1)
+		return -EIO;
+	return 0;
+}
+
+static u8 typhoon_cinergy1200s_inittab[] = {
+	0x01, 0x15,
+	0x02, 0x30,
+	0x03, 0x00,
+	0x04, 0x7d,		/* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+	0x05, 0x35,		/* I2CT = 0, SCLT = 1, SDAT = 1 */
+	0x06, 0x40,		/* DAC not used, set to high impendance mode */
+	0x07, 0x00,		/* DAC LSB */
+	0x08, 0x40,		/* DiSEqC off */
+	0x09, 0x00,		/* FIFO */
+	0x0c, 0x51,		/* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+	0x0d, 0x82,		/* DC offset compensation = ON, beta_agc1 = 2 */
+	0x0e, 0x23,		/* alpha_tmg = 2, beta_tmg = 3 */
+	0x10, 0x3f,		// AGC2  0x3d
+	0x11, 0x84,
+	0x12, 0xb5,		// Lock detect: -64  Carrier freq detect:on
+	0x15, 0xc9,		// lock detector threshold
+	0x16, 0x00,
+	0x17, 0x00,
+	0x18, 0x00,
+	0x19, 0x00,
+	0x1a, 0x00,
+	0x1f, 0x50,
+	0x20, 0x00,
+	0x21, 0x00,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x28, 0x00,		// out imp: normal  out type: parallel FEC mode:0
+	0x29, 0x1e,		// 1/2 threshold
+	0x2a, 0x14,		// 2/3 threshold
+	0x2b, 0x0f,		// 3/4 threshold
+	0x2c, 0x09,		// 5/6 threshold
+	0x2d, 0x05,		// 7/8 threshold
+	0x2e, 0x01,
+	0x31, 0x1f,		// test all FECs
+	0x32, 0x19,		// viterbi and synchro search
+	0x33, 0xfc,		// rs control
+	0x34, 0x93,		// error control
+	0x0f, 0x92,
+	0xff, 0xff
+};
+
+static struct stv0299_config typhoon_config = {
+	.demod_address = 0x68,
+	.inittab = typhoon_cinergy1200s_inittab,
+	.mclk = 88000000UL,
+	.invert = 0,
+	.enhanced_tuning = 0,
+	.skip_reinit = 0,
+	.lock_output = STV0229_LOCKOUTPUT_1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP0,
+	.min_delay_ms = 100,
+	.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+	.pll_set = philips_su1278_ty_ci_pll_set,
+};
+
+
+static struct stv0299_config cinergy_1200s_config = {
+	.demod_address = 0x68,
+	.inittab = typhoon_cinergy1200s_inittab,
+	.mclk = 88000000UL,
+	.invert = 0,
+	.enhanced_tuning = 0,
+	.skip_reinit = 0,
+	.lock_output = STV0229_LOCKOUTPUT_0,
+	.volt13_op0_op1 = STV0299_VOLT13_OP0,
+	.min_delay_ms = 100,
+	.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+	.pll_set = philips_su1278_ty_ci_pll_set,
+};
+
+
+static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+	struct budget *budget = (struct budget *) fe->dvb->priv;
+	u8 buf[4];
+	struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
+
+#define TUNER_MUL 62500
+
+	u32 div = (params->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = 0x8e;
+	buf[3] = (params->frequency < 174500000 ? 0xa1 :
+		  params->frequency < 454000000 ? 0x92 : 0x34);
+
+	if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+		return -EIO;
+	return 0;
+}
+
+static struct tda10021_config philips_cu1216_config = {
+	.demod_address = 0x0c,
+	.pll_set = philips_cu1216_pll_set,
+};
+
+
+
+
+static int philips_tu1216_pll_init(struct dvb_frontend *fe)
+{
+	struct budget *budget = (struct budget *) fe->dvb->priv;
+	static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
+	struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
+
+	// setup PLL configuration
+	if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
+		return -EIO;
+	msleep(1);
+
+	return 0;
+}
+
+static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+	struct budget *budget = (struct budget *) fe->dvb->priv;
+	u8 tuner_buf[4];
+	struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len =
+			sizeof(tuner_buf) };
+	int tuner_frequency = 0;
+	u8 band, cp, filter;
+
+	// determine charge pump
+	tuner_frequency = params->frequency + 36166000;
+	if (tuner_frequency < 87000000)
+		return -EINVAL;
+	else if (tuner_frequency < 130000000)
+		cp = 3;
+	else if (tuner_frequency < 160000000)
+		cp = 5;
+	else if (tuner_frequency < 200000000)
+		cp = 6;
+	else if (tuner_frequency < 290000000)
+		cp = 3;
+	else if (tuner_frequency < 420000000)
+		cp = 5;
+	else if (tuner_frequency < 480000000)
+		cp = 6;
+	else if (tuner_frequency < 620000000)
+		cp = 3;
+	else if (tuner_frequency < 830000000)
+		cp = 5;
+	else if (tuner_frequency < 895000000)
+		cp = 7;
+	else
+		return -EINVAL;
+
+	// determine band
+	if (params->frequency < 49000000)
+		return -EINVAL;
+	else if (params->frequency < 161000000)
+		band = 1;
+	else if (params->frequency < 444000000)
+		band = 2;
+	else if (params->frequency < 861000000)
+		band = 4;
+	else
+		return -EINVAL;
+
+	// setup PLL filter
+	switch (params->u.ofdm.bandwidth) {
+	case BANDWIDTH_6_MHZ:
+		filter = 0;
+		break;
+
+	case BANDWIDTH_7_MHZ:
+		filter = 0;
+		break;
+
+	case BANDWIDTH_8_MHZ:
+		filter = 1;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	// calculate divisor
+	// ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
+	tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000;
+
+	// setup tuner buffer
+	tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
+	tuner_buf[1] = tuner_frequency & 0xff;
+	tuner_buf[2] = 0xca;
+	tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+
+	if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
+		return -EIO;
+
+	msleep(1);
+	return 0;
+}
+
+static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
+					   const struct firmware **fw, char *name)
+{
+	struct budget *budget = (struct budget *) fe->dvb->priv;
+
+	return request_firmware(fw, name, &budget->dev->pci->dev);
+}
+
+static struct tda1004x_config philips_tu1216_config = {
+
+	.demod_address = 0x8,
+	.invert = 1,
+	.invert_oclk = 1,
+	.pll_init = philips_tu1216_pll_init,
+	.pll_set = philips_tu1216_pll_set,
+	.request_firmware = philips_tu1216_request_firmware,
+};
+
+
+
+
+static u8 read_pwm(struct budget_av *budget_av)
+{
+	u8 b = 0xff;
+	u8 pwm;
+	struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
+	{.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
+	};
+
+	if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2)
+	    || (pwm == 0xff))
+		pwm = 0x48;
+
+	return pwm;
+}
+
+
+static void frontend_init(struct budget_av *budget_av)
+{
+	switch (budget_av->budget.dev->pci->subsystem_device) {
+	case 0x4f56:		// Typhoon/KNC1 DVB-S budget (stv0299/Philips SU1278(tsa5059))
+		budget_av->budget.dvb_frontend =
+			stv0299_attach(&typhoon_config, &budget_av->budget.i2c_adap);
+		if (budget_av->budget.dvb_frontend != NULL) {
+			break;
+		}
+		break;
+
+	case 0x0020:		// KNC1 DVB-C budget (tda10021/Philips CU1216(tua6034))
+		budget_av->budget.dvb_frontend =
+			tda10021_attach(&philips_cu1216_config,
+					&budget_av->budget.i2c_adap, read_pwm(budget_av));
+		if (budget_av->budget.dvb_frontend != NULL) {
+			break;
+		}
+		break;
+
+	case 0x0030:		// KNC1 DVB-T budget (tda10046/Philips TU1216(tda6651tt))
+		budget_av->budget.dvb_frontend =
+			tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
+		if (budget_av->budget.dvb_frontend != NULL) {
+			break;
+		}
+		break;
+
+	case 0x1154:		// TerraTec Cinergy 1200 DVB-S (stv0299/Philips SU1278(tsa5059))
+		budget_av->budget.dvb_frontend =
+			stv0299_attach(&cinergy_1200s_config, &budget_av->budget.i2c_adap);
+		if (budget_av->budget.dvb_frontend != NULL) {
+			break;
+		}
+		break;
+
+	case 0x1156:		// Terratec Cinergy 1200 DVB-C (tda10021/Philips CU1216(tua6034))
+		budget_av->budget.dvb_frontend =
+			tda10021_attach(&philips_cu1216_config,
+					&budget_av->budget.i2c_adap, read_pwm(budget_av));
+		if (budget_av->budget.dvb_frontend) {
+			break;
+		}
+		break;
+
+	case 0x1157:		// Terratec Cinergy 1200 DVB-T (tda10046/Philips TU1216(tda6651tt))
+		budget_av->budget.dvb_frontend =
+			tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
+		if (budget_av->budget.dvb_frontend) {
+			break;
+		}
+		break;
+	}
+
+	if (budget_av->budget.dvb_frontend == NULL) {
+		printk("budget_av: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
+		       budget_av->budget.dev->pci->vendor,
+		       budget_av->budget.dev->pci->device,
+		       budget_av->budget.dev->pci->subsystem_vendor,
+		       budget_av->budget.dev->pci->subsystem_device);
+	} else {
+		if (dvb_register_frontend
+		    (budget_av->budget.dvb_adapter, budget_av->budget.dvb_frontend)) {
+			printk("budget-av: Frontend registration failed!\n");
+			if (budget_av->budget.dvb_frontend->ops->release)
+				budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
+			budget_av->budget.dvb_frontend = NULL;
+		}
+	}
+}
+
+
+static void budget_av_irq(struct saa7146_dev *dev, u32 * isr)
+{
+	struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
+
+	dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av);
+
+	if (*isr & MASK_10)
+		ttpci_budget_irq10_handler(dev, isr);
+}
+
+static int budget_av_detach(struct saa7146_dev *dev)
+{
+	struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
+	int err;
+
+	dprintk(2, "dev: %p\n", dev);
+
+	if (1 == budget_av->has_saa7113) {
+		saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
+
+		msleep(200);
+
+		saa7146_unregister_device(&budget_av->vd, dev);
+	}
+
+	if (budget_av->budget.ci_present)
+		ciintf_deinit(budget_av);
+
+	if (budget_av->budget.dvb_frontend != NULL)
+		dvb_unregister_frontend(budget_av->budget.dvb_frontend);
+	err = ttpci_budget_deinit(&budget_av->budget);
+
+	kfree(budget_av);
+
+	return err;
+}
+
+static struct saa7146_ext_vv vv_data;
+
+static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
+{
+	struct budget_av *budget_av;
+	u8 *mac;
+	int err;
+
+	dprintk(2, "dev: %p\n", dev);
+
+	if (!(budget_av = kmalloc(sizeof(struct budget_av), GFP_KERNEL)))
+		return -ENOMEM;
+
+	memset(budget_av, 0, sizeof(struct budget_av));
+
+	budget_av->budget.ci_present = 0;
+
+	dev->ext_priv = budget_av;
+
+	if ((err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE))) {
+		kfree(budget_av);
+		return err;
+	}
+
+	/* knc1 initialization */
+	saa7146_write(dev, DD1_STREAM_B, 0x04000000);
+	saa7146_write(dev, DD1_INIT, 0x07000600);
+	saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
+
+	saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTHI);
+	msleep(500);
+
+	if (0 == saa7113_init(budget_av)) {
+		budget_av->has_saa7113 = 1;
+
+		if (0 != saa7146_vv_init(dev, &vv_data)) {
+			/* fixme: proper cleanup here */
+			ERR(("cannot init vv subsystem.\n"));
+			return err;
+		}
+
+		if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
+			/* fixme: proper cleanup here */
+			ERR(("cannot register capture v4l2 device.\n"));
+			return err;
+		}
+
+		/* beware: this modifies dev->vv ... */
+		saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A,
+						SAA7146_HPS_SYNC_PORT_A);
+
+		saa7113_setinput(budget_av, 0);
+	} else {
+		budget_av->has_saa7113 = 0;
+
+		saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
+	}
+
+	/* fixme: find some sane values here... */
+	saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
+
+	mac = budget_av->budget.dvb_adapter->proposed_mac;
+	if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
+		printk("KNC1-%d: Could not read MAC from KNC1 card\n",
+		       budget_av->budget.dvb_adapter->num);
+		memset(mac, 0, 6);
+	} else {
+		printk("KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+		       budget_av->budget.dvb_adapter->num,
+		       mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+	}
+
+	budget_av->budget.dvb_adapter->priv = budget_av;
+	frontend_init(budget_av);
+
+	if (enable_ci)
+		ciintf_init(budget_av);
+
+	return 0;
+}
+
+#define KNC1_INPUTS 2
+static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
+	{0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
+	{1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
+};
+
+static struct saa7146_extension_ioctls ioctls[] = {
+	{VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE},
+	{VIDIOC_G_INPUT, SAA7146_EXCLUSIVE},
+	{VIDIOC_S_INPUT, SAA7146_EXCLUSIVE},
+	{0, 0}
+};
+
+static int av_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
+
+	switch (cmd) {
+	case VIDIOC_ENUMINPUT:{
+		struct v4l2_input *i = arg;
+
+		dprintk(1, "VIDIOC_ENUMINPUT %d.\n", i->index);
+		if (i->index < 0 || i->index >= KNC1_INPUTS) {
+			return -EINVAL;
+		}
+		memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
+		return 0;
+	}
+	case VIDIOC_G_INPUT:{
+		int *input = (int *) arg;
+
+		*input = budget_av->cur_input;
+
+		dprintk(1, "VIDIOC_G_INPUT %d.\n", *input);
+		return 0;
+	}
+	case VIDIOC_S_INPUT:{
+		int input = *(int *) arg;
+		dprintk(1, "VIDIOC_S_INPUT %d.\n", input);
+		return saa7113_setinput(budget_av, input);
+	}
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+static struct saa7146_standard standard[] = {
+	{.name = "PAL",.id = V4L2_STD_PAL,
+	 .v_offset = 0x17,.v_field = 288,
+	 .h_offset = 0x14,.h_pixels = 680,
+	 .v_max_out = 576,.h_max_out = 768 },
+
+	{.name = "NTSC",.id = V4L2_STD_NTSC,
+	 .v_offset = 0x16,.v_field = 240,
+	 .h_offset = 0x06,.h_pixels = 708,
+	 .v_max_out = 480,.h_max_out = 640, },
+};
+
+static struct saa7146_ext_vv vv_data = {
+	.inputs = 2,
+	.capabilities = 0,	// perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
+	.flags = 0,
+	.stds = &standard[0],
+	.num_stds = sizeof(standard) / sizeof(struct saa7146_standard),
+	.ioctls = &ioctls[0],
+	.ioctl = av_ioctl,
+};
+
+static struct saa7146_extension budget_extension;
+
+MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
+MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
+MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
+MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
+MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
+
+static struct pci_device_id pci_tbl[] = {
+	MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
+	MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
+	MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
+	MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
+	MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
+	MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
+	{
+	 .vendor = 0,
+	}
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_extension budget_extension = {
+	.name = "budget dvb /w video in\0",
+	.pci_tbl = pci_tbl,
+
+	.module = THIS_MODULE,
+	.attach = budget_av_attach,
+	.detach = budget_av_detach,
+
+	.irq_mask = MASK_10,
+	.irq_func = budget_av_irq,
+};
+
+static int __init budget_av_init(void)
+{
+	return saa7146_register_extension(&budget_extension);
+}
+
+static void __exit budget_av_exit(void)
+{
+	saa7146_unregister_extension(&budget_extension);
+}
+
+module_init(budget_av_init);
+module_exit(budget_av_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
+		   "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
+module_param_named(enable_ci, enable_ci, int, 0644);
+MODULE_PARM_DESC(enable_ci, "Turn on/off CI module (default:off).");