Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
new file mode 100644
index 0000000..0732efd
--- /dev/null
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -0,0 +1,434 @@
+/* SF16FMR2 radio driver for Linux radio support
+ * heavily based on fmi driver...
+ * (c) 2000-2002 Ziglio Frediano, freddy77@angelfire.com
+ *
+ * Notes on the hardware
+ *
+ * Frequency control is done digitally -- ie out(port,encodefreq(95.8));
+ * No volume control - only mute/unmute - you have to use line volume
+ *
+ * For read stereo/mono you must wait 0.1 sec after set frequency and
+ * card unmuted so I set frequency on unmute
+ * Signal handling seem to work only on autoscanning (not implemented)
+ */
+
+#include <linux/module.h> /* Modules */
+#include <linux/init.h> /* Initdata */
+#include <linux/ioport.h> /* check_region, request_region */
+#include <linux/delay.h> /* udelay */
+#include <asm/io.h> /* outb, outb_p */
+#include <asm/uaccess.h> /* copy to/from user */
+#include <linux/videodev.h> /* kernel radio structs */
+#include <asm/semaphore.h>
+
+static struct semaphore lock;
+
+#undef DEBUG
+//#define DEBUG 1
+
+#ifdef DEBUG
+# define debug_print(s) printk s
+#else
+# define debug_print(s)
+#endif
+
+/* this should be static vars for module size */
+struct fmr2_device
+{
+ int port;
+ int curvol; /* 0-65535, if not volume 0 or 65535 */
+ int mute;
+ int stereo; /* card is producing stereo audio */
+ unsigned long curfreq; /* freq in kHz */
+ int card_type;
+ __u32 flags;
+};
+
+static int io = 0x384;
+static int radio_nr = -1;
+
+/* hw precision is 12.5 kHz
+ * It is only usefull to give freq in intervall of 200 (=0.0125Mhz),
+ * other bits will be truncated
+ */
+#define RSF16_ENCODE(x) ((x)/200+856)
+#define RSF16_MINFREQ 87*16000
+#define RSF16_MAXFREQ 108*16000
+
+static inline void wait(int n,int port)
+{
+ for (;n;--n) inb(port);
+}
+
+static void outbits(int bits, unsigned int data, int nWait, int port)
+{
+ int bit;
+ for(;--bits>=0;) {
+ bit = (data>>bits) & 1;
+ outb(bit,port);
+ wait(nWait,port);
+ outb(bit|2,port);
+ wait(nWait,port);
+ outb(bit,port);
+ wait(nWait,port);
+ }
+}
+
+static inline void fmr2_mute(int port)
+{
+ outb(0x00, port);
+ wait(4,port);
+}
+
+static inline void fmr2_unmute(int port)
+{
+ outb(0x04, port);
+ wait(4,port);
+}
+
+static inline int fmr2_stereo_mode(int port)
+{
+ int n = inb(port);
+ outb(6,port);
+ inb(port);
+ n = ((n>>3)&1)^1;
+ debug_print((KERN_DEBUG "stereo: %d\n", n));
+ return n;
+}
+
+static int fmr2_product_info(struct fmr2_device *dev)
+{
+ int n = inb(dev->port);
+ n &= 0xC1;
+ if (n == 0)
+ {
+ /* this should support volume set */
+ dev->card_type = 12;
+ return 0;
+ }
+ /* not volume (mine is 11) */
+ dev->card_type = (n==128)?11:0;
+ return n;
+}
+
+static inline int fmr2_getsigstr(struct fmr2_device *dev)
+{
+ /* !!! work only if scanning freq */
+ int port = dev->port, res = 0xffff;
+ outb(5,port);
+ wait(4,port);
+ if (!(inb(port)&1)) res = 0;
+ debug_print((KERN_DEBUG "signal: %d\n", res));
+ return res;
+}
+
+/* set frequency and unmute card */
+static int fmr2_setfreq(struct fmr2_device *dev)
+{
+ int port = dev->port;
+ unsigned long freq = dev->curfreq;
+
+ fmr2_mute(port);
+
+ /* 0x42 for mono output
+ * 0x102 forward scanning
+ * 0x182 scansione avanti
+ */
+ outbits(9,0x2,3,port);
+ outbits(16,RSF16_ENCODE(freq),2,port);
+
+ fmr2_unmute(port);
+
+ /* wait 0.11 sec */
+ msleep(110);
+
+ /* NOTE if mute this stop radio
+ you must set freq on unmute */
+ dev->stereo = fmr2_stereo_mode(port);
+ return 0;
+}
+
+/* !!! not tested, in my card this does't work !!! */
+static int fmr2_setvolume(struct fmr2_device *dev)
+{
+ int i,a,n, port = dev->port;
+
+ if (dev->card_type != 11) return 1;
+
+ switch( (dev->curvol+(1<<11)) >> 12 )
+ {
+ case 0: case 1: n = 0x21; break;
+ case 2: n = 0x84; break;
+ case 3: n = 0x90; break;
+ case 4: n = 0x104; break;
+ case 5: n = 0x110; break;
+ case 6: n = 0x204; break;
+ case 7: n = 0x210; break;
+ case 8: n = 0x402; break;
+ case 9: n = 0x404; break;
+ default:
+ case 10: n = 0x408; break;
+ case 11: n = 0x410; break;
+ case 12: n = 0x801; break;
+ case 13: n = 0x802; break;
+ case 14: n = 0x804; break;
+ case 15: n = 0x808; break;
+ case 16: n = 0x810; break;
+ }
+ for(i=12;--i>=0;)
+ {
+ a = ((n >> i) & 1) << 6; /* if (a=0) a= 0; else a= 0x40; */
+ outb(a|4, port);
+ wait(4,port);
+ outb(a|0x24, port);
+ wait(4,port);
+ outb(a|4, port);
+ wait(4,port);
+ }
+ for(i=6;--i>=0;)
+ {
+ a = ((0x18 >> i) & 1) << 6;
+ outb(a|4, port);
+ wait(4,port);
+ outb(a|0x24, port);
+ wait(4,port);
+ outb(a|4, port);
+ wait(4,port);
+ }
+ wait(4,port);
+ outb(0x14, port);
+
+ return 0;
+}
+
+static int fmr2_do_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, void *arg)
+{
+ struct video_device *dev = video_devdata(file);
+ struct fmr2_device *fmr2 = dev->priv;
+ debug_print((KERN_DEBUG "freq %ld flags %d vol %d mute %d "
+ "stereo %d type %d\n",
+ fmr2->curfreq, fmr2->flags, fmr2->curvol, fmr2->mute,
+ fmr2->stereo, fmr2->card_type));
+
+ switch(cmd)
+ {
+ case VIDIOCGCAP:
+ {
+ struct video_capability *v = arg;
+ memset(v,0,sizeof(*v));
+ strcpy(v->name, "SF16-FMR2 radio");
+ v->type=VID_TYPE_TUNER;
+ v->channels=1;
+ v->audios=1;
+ return 0;
+ }
+ case VIDIOCGTUNER:
+ {
+ struct video_tuner *v = arg;
+ int mult;
+
+ if(v->tuner) /* Only 1 tuner */
+ return -EINVAL;
+ strcpy(v->name, "FM");
+ mult = (fmr2->flags & VIDEO_TUNER_LOW) ? 1 : 1000;
+ v->rangelow = RSF16_MINFREQ/mult;
+ v->rangehigh = RSF16_MAXFREQ/mult;
+ v->flags = fmr2->flags | VIDEO_AUDIO_MUTABLE;
+ if (fmr2->mute)
+ v->flags |= VIDEO_AUDIO_MUTE;
+ v->mode=VIDEO_MODE_AUTO;
+ down(&lock);
+ v->signal = fmr2_getsigstr(fmr2);
+ up(&lock);
+ return 0;
+ }
+ case VIDIOCSTUNER:
+ {
+ struct video_tuner *v = arg;
+ if (v->tuner!=0)
+ return -EINVAL;
+ fmr2->flags = v->flags & VIDEO_TUNER_LOW;
+ return 0;
+ }
+ case VIDIOCGFREQ:
+ {
+ unsigned long *freq = arg;
+ *freq = fmr2->curfreq;
+ if (!(fmr2->flags & VIDEO_TUNER_LOW))
+ *freq /= 1000;
+ return 0;
+ }
+ case VIDIOCSFREQ:
+ {
+ unsigned long *freq = arg;
+ if (!(fmr2->flags & VIDEO_TUNER_LOW))
+ *freq *= 1000;
+ if ( *freq < RSF16_MINFREQ || *freq > RSF16_MAXFREQ )
+ return -EINVAL;
+ /* rounding in steps of 200 to match th freq
+ * that will be used
+ */
+ fmr2->curfreq = (*freq/200)*200;
+
+ /* set card freq (if not muted) */
+ if (fmr2->curvol && !fmr2->mute)
+ {
+ down(&lock);
+ fmr2_setfreq(fmr2);
+ up(&lock);
+ }
+ return 0;
+ }
+ case VIDIOCGAUDIO:
+ {
+ struct video_audio *v = arg;
+ memset(v,0,sizeof(*v));
+ /* !!! do not return VIDEO_AUDIO_MUTE */
+ v->flags = VIDEO_AUDIO_MUTABLE;
+ strcpy(v->name, "Radio");
+ /* get current stereo mode */
+ v->mode = fmr2->stereo ? VIDEO_SOUND_STEREO: VIDEO_SOUND_MONO;
+ /* volume supported ? */
+ if (fmr2->card_type == 11)
+ {
+ v->flags |= VIDEO_AUDIO_VOLUME;
+ v->step = 1 << 12;
+ v->volume = fmr2->curvol;
+ }
+ debug_print((KERN_DEBUG "Get flags %d vol %d\n", v->flags, v->volume));
+ return 0;
+ }
+ case VIDIOCSAUDIO:
+ {
+ struct video_audio *v = arg;
+ if(v->audio)
+ return -EINVAL;
+ debug_print((KERN_DEBUG "Set flags %d vol %d\n", v->flags, v->volume));
+ /* set volume */
+ if (v->flags & VIDEO_AUDIO_VOLUME)
+ fmr2->curvol = v->volume; /* !!! set with precision */
+ if (fmr2->card_type != 11) fmr2->curvol = 65535;
+ fmr2->mute = 0;
+ if (v->flags & VIDEO_AUDIO_MUTE)
+ fmr2->mute = 1;
+#ifdef DEBUG
+ if (fmr2->curvol && !fmr2->mute)
+ printk(KERN_DEBUG "unmute\n");
+ else
+ printk(KERN_DEBUG "mute\n");
+#endif
+ down(&lock);
+ if (fmr2->curvol && !fmr2->mute)
+ {
+ fmr2_setvolume(fmr2);
+ fmr2_setfreq(fmr2);
+ }
+ else fmr2_mute(fmr2->port);
+ up(&lock);
+ return 0;
+ }
+ case VIDIOCGUNIT:
+ {
+ struct video_unit *v = arg;
+ v->video=VIDEO_NO_UNIT;
+ v->vbi=VIDEO_NO_UNIT;
+ v->radio=dev->minor;
+ v->audio=0; /* How do we find out this??? */
+ v->teletext=VIDEO_NO_UNIT;
+ return 0;
+ }
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+static int fmr2_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+ {
+ return video_usercopy(inode, file, cmd, arg, fmr2_do_ioctl);
+}
+
+static struct fmr2_device fmr2_unit;
+
+static struct file_operations fmr2_fops = {
+ .owner = THIS_MODULE,
+ .open = video_exclusive_open,
+ .release = video_exclusive_release,
+ .ioctl = fmr2_ioctl,
+ .llseek = no_llseek,
+};
+
+static struct video_device fmr2_radio=
+{
+ .owner = THIS_MODULE,
+ .name = "SF16FMR2 radio",
+ . type = VID_TYPE_TUNER,
+ .hardware = VID_HARDWARE_SF16FMR2,
+ .fops = &fmr2_fops,
+};
+
+static int __init fmr2_init(void)
+{
+ fmr2_unit.port = io;
+ fmr2_unit.curvol = 0;
+ fmr2_unit.mute = 0;
+ fmr2_unit.curfreq = 0;
+ fmr2_unit.stereo = 1;
+ fmr2_unit.flags = VIDEO_TUNER_LOW;
+ fmr2_unit.card_type = 0;
+ fmr2_radio.priv = &fmr2_unit;
+
+ init_MUTEX(&lock);
+
+ if (request_region(io, 2, "sf16fmr2"))
+ {
+ printk(KERN_ERR "fmr2: port 0x%x already in use\n", io);
+ return -EBUSY;
+ }
+
+ if(video_register_device(&fmr2_radio, VFL_TYPE_RADIO, radio_nr)==-1)
+ {
+ release_region(io, 2);
+ return -EINVAL;
+ }
+
+ printk(KERN_INFO "SF16FMR2 radio card driver at 0x%x.\n", io);
+ debug_print((KERN_DEBUG "Mute %d Low %d\n",VIDEO_AUDIO_MUTE,VIDEO_TUNER_LOW));
+ /* mute card - prevents noisy bootups */
+ down(&lock);
+ fmr2_mute(io);
+ fmr2_product_info(&fmr2_unit);
+ up(&lock);
+ debug_print((KERN_DEBUG "card_type %d\n", fmr2_unit.card_type));
+ return 0;
+}
+
+MODULE_AUTHOR("Ziglio Frediano, freddy77@angelfire.com");
+MODULE_DESCRIPTION("A driver for the SF16FMR2 radio.");
+MODULE_LICENSE("GPL");
+
+module_param(io, int, 0);
+MODULE_PARM_DESC(io, "I/O address of the SF16FMR2 card (should be 0x384, if do not work try 0x284)");
+module_param(radio_nr, int, 0);
+
+static void __exit fmr2_cleanup_module(void)
+{
+ video_unregister_device(&fmr2_radio);
+ release_region(io,2);
+}
+
+module_init(fmr2_init);
+module_exit(fmr2_cleanup_module);
+
+#ifndef MODULE
+
+static int __init fmr2_setup_io(char *str)
+{
+ get_option(&str, &io);
+ return 1;
+}
+
+__setup("sf16fmr2=", fmr2_setup_io);
+
+#endif