Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
new file mode 100644
index 0000000..70bf1f1
--- /dev/null
+++ b/drivers/media/video/mxb.c
@@ -0,0 +1,1035 @@
+/*
+ mxb - v4l2 driver for the Multimedia eXtension Board
+
+ Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
+
+ Visit http://www.mihu.de/linux/saa7146/mxb/
+ for further details about this card.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#define DEBUG_VARIABLE debug
+
+#include <media/saa7146_vv.h>
+#include <media/tuner.h>
+#include <linux/video_decoder.h>
+
+#include "mxb.h"
+#include "tea6415c.h"
+#include "tea6420.h"
+#include "tda9840.h"
+
+#define I2C_SAA7111 0x24
+
+#define MXB_BOARD_CAN_DO_VBI(dev) (dev->revision != 0)
+
+/* global variable */
+static int mxb_num = 0;
+
+/* initial frequence the tuner will be tuned to.
+ in verden (lower saxony, germany) 4148 is a
+ channel called "phoenix" */
+static int freq = 4148;
+module_param(freq, int, 0644);
+MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup");
+
+static int debug = 0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
+
+#define MXB_INPUTS 4
+enum { TUNER, AUX1, AUX3, AUX3_YC };
+
+static struct v4l2_input mxb_inputs[MXB_INPUTS] = {
+ { TUNER, "Tuner", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
+ { AUX1, "AUX1", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
+ { AUX3, "AUX3 Composite", V4L2_INPUT_TYPE_CAMERA, 4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
+ { AUX3_YC, "AUX3 S-Video", V4L2_INPUT_TYPE_CAMERA, 4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
+};
+
+/* this array holds the information, which port of the saa7146 each
+ input actually uses. the mxb uses port 0 for every input */
+static struct {
+ int hps_source;
+ int hps_sync;
+} input_port_selection[MXB_INPUTS] = {
+ { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
+ { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
+ { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
+ { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
+};
+
+/* this array holds the information of the audio source (mxb_audios),
+ which has to be switched corresponding to the video source (mxb_channels) */
+static int video_audio_connect[MXB_INPUTS] =
+ { 0, 1, 3, 3 };
+
+/* these are the necessary input-output-pins for bringing one audio source
+(see above) to the CD-output */
+static struct tea6420_multiplex TEA6420_cd[MXB_AUDIOS+1][2] =
+ {
+ {{1,1,0},{1,1,0}}, /* Tuner */
+ {{5,1,0},{6,1,0}}, /* AUX 1 */
+ {{4,1,0},{6,1,0}}, /* AUX 2 */
+ {{3,1,0},{6,1,0}}, /* AUX 3 */
+ {{1,1,0},{3,1,0}}, /* Radio */
+ {{1,1,0},{2,1,0}}, /* CD-Rom */
+ {{6,1,0},{6,1,0}} /* Mute */
+ };
+
+/* these are the necessary input-output-pins for bringing one audio source
+(see above) to the line-output */
+static struct tea6420_multiplex TEA6420_line[MXB_AUDIOS+1][2] =
+ {
+ {{2,3,0},{1,2,0}},
+ {{5,3,0},{6,2,0}},
+ {{4,3,0},{6,2,0}},
+ {{3,3,0},{6,2,0}},
+ {{2,3,0},{3,2,0}},
+ {{2,3,0},{2,2,0}},
+ {{6,3,0},{6,2,0}} /* Mute */
+ };
+
+#define MAXCONTROLS 1
+static struct v4l2_queryctrl mxb_controls[] = {
+ { V4L2_CID_AUDIO_MUTE, V4L2_CTRL_TYPE_BOOLEAN, "Mute", 0, 1, 1, 0, 0 },
+};
+
+static struct saa7146_extension_ioctls ioctls[] = {
+ { VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE },
+ { VIDIOC_G_INPUT, SAA7146_EXCLUSIVE },
+ { VIDIOC_S_INPUT, SAA7146_EXCLUSIVE },
+ { VIDIOC_QUERYCTRL, SAA7146_BEFORE },
+ { VIDIOC_G_CTRL, SAA7146_BEFORE },
+ { VIDIOC_S_CTRL, SAA7146_BEFORE },
+ { VIDIOC_G_TUNER, SAA7146_EXCLUSIVE },
+ { VIDIOC_S_TUNER, SAA7146_EXCLUSIVE },
+ { VIDIOC_G_FREQUENCY, SAA7146_EXCLUSIVE },
+ { VIDIOC_S_FREQUENCY, SAA7146_EXCLUSIVE },
+ { VIDIOC_G_AUDIO, SAA7146_EXCLUSIVE },
+ { VIDIOC_S_AUDIO, SAA7146_EXCLUSIVE },
+ { MXB_S_AUDIO_CD, SAA7146_EXCLUSIVE }, /* custom control */
+ { MXB_S_AUDIO_LINE, SAA7146_EXCLUSIVE }, /* custom control */
+ { 0, 0 }
+};
+
+struct mxb
+{
+ struct video_device *video_dev;
+ struct video_device *vbi_dev;
+
+ struct i2c_adapter i2c_adapter;
+
+ struct i2c_client* saa7111a;
+ struct i2c_client* tda9840;
+ struct i2c_client* tea6415c;
+ struct i2c_client* tuner;
+ struct i2c_client* tea6420_1;
+ struct i2c_client* tea6420_2;
+
+ int cur_mode; /* current audio mode (mono, stereo, ...) */
+ int cur_input; /* current input */
+ int cur_freq; /* current frequency the tuner is tuned to */
+ int cur_mute; /* current mute status */
+};
+
+static struct saa7146_extension extension;
+
+static int mxb_probe(struct saa7146_dev* dev)
+{
+ struct mxb* mxb = NULL;
+ struct i2c_client *client;
+ struct list_head *item;
+ int result;
+
+ if ((result = request_module("saa7111")) < 0) {
+ printk("mxb: saa7111 i2c module not available.\n");
+ return -ENODEV;
+ }
+ if ((result = request_module("tuner")) < 0) {
+ printk("mxb: tuner i2c module not available.\n");
+ return -ENODEV;
+ }
+ if ((result = request_module("tea6420")) < 0) {
+ printk("mxb: tea6420 i2c module not available.\n");
+ return -ENODEV;
+ }
+ if ((result = request_module("tea6415c")) < 0) {
+ printk("mxb: tea6415c i2c module not available.\n");
+ return -ENODEV;
+ }
+ if ((result = request_module("tda9840")) < 0) {
+ printk("mxb: tda9840 i2c module not available.\n");
+ return -ENODEV;
+ }
+
+ mxb = (struct mxb*)kmalloc(sizeof(struct mxb), GFP_KERNEL);
+ if( NULL == mxb ) {
+ DEB_D(("not enough kernel memory.\n"));
+ return -ENOMEM;
+ }
+ memset(mxb, 0x0, sizeof(struct mxb));
+
+ mxb->i2c_adapter = (struct i2c_adapter) {
+ .class = I2C_CLASS_TV_ANALOG,
+ .name = "mxb",
+ };
+
+ saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
+ if(i2c_add_adapter(&mxb->i2c_adapter) < 0) {
+ DEB_S(("cannot register i2c-device. skipping.\n"));
+ kfree(mxb);
+ return -EFAULT;
+ }
+
+ /* loop through all i2c-devices on the bus and look who is there */
+ list_for_each(item,&mxb->i2c_adapter.clients) {
+ client = list_entry(item, struct i2c_client, list);
+ if( I2C_TEA6420_1 == client->addr )
+ mxb->tea6420_1 = client;
+ if( I2C_TEA6420_2 == client->addr )
+ mxb->tea6420_2 = client;
+ if( I2C_TEA6415C_2 == client->addr )
+ mxb->tea6415c = client;
+ if( I2C_TDA9840 == client->addr )
+ mxb->tda9840 = client;
+ if( I2C_SAA7111 == client->addr )
+ mxb->saa7111a = client;
+ if( 0x60 == client->addr )
+ mxb->tuner = client;
+ }
+
+ /* check if all devices are present */
+ if( 0 == mxb->tea6420_1 || 0 == mxb->tea6420_2 || 0 == mxb->tea6415c
+ || 0 == mxb->tda9840 || 0 == mxb->saa7111a || 0 == mxb->tuner ) {
+
+ printk("mxb: did not find all i2c devices. aborting\n");
+ i2c_del_adapter(&mxb->i2c_adapter);
+ kfree(mxb);
+ return -ENODEV;
+ }
+
+ /* all devices are present, probe was successful */
+
+ /* we store the pointer in our private data field */
+ dev->ext_priv = mxb;
+
+ return 0;
+}
+
+/* some init data for the saa7740, the so-called 'sound arena module'.
+ there are no specs available, so we simply use some init values */
+static struct {
+ int length;
+ char data[9];
+} mxb_saa7740_init[] = {
+ { 3, { 0x80, 0x00, 0x00 } },{ 3, { 0x80, 0x89, 0x00 } },
+ { 3, { 0x80, 0xb0, 0x0a } },{ 3, { 0x00, 0x00, 0x00 } },
+ { 3, { 0x49, 0x00, 0x00 } },{ 3, { 0x4a, 0x00, 0x00 } },
+ { 3, { 0x4b, 0x00, 0x00 } },{ 3, { 0x4c, 0x00, 0x00 } },
+ { 3, { 0x4d, 0x00, 0x00 } },{ 3, { 0x4e, 0x00, 0x00 } },
+ { 3, { 0x4f, 0x00, 0x00 } },{ 3, { 0x50, 0x00, 0x00 } },
+ { 3, { 0x51, 0x00, 0x00 } },{ 3, { 0x52, 0x00, 0x00 } },
+ { 3, { 0x53, 0x00, 0x00 } },{ 3, { 0x54, 0x00, 0x00 } },
+ { 3, { 0x55, 0x00, 0x00 } },{ 3, { 0x56, 0x00, 0x00 } },
+ { 3, { 0x57, 0x00, 0x00 } },{ 3, { 0x58, 0x00, 0x00 } },
+ { 3, { 0x59, 0x00, 0x00 } },{ 3, { 0x5a, 0x00, 0x00 } },
+ { 3, { 0x5b, 0x00, 0x00 } },{ 3, { 0x5c, 0x00, 0x00 } },
+ { 3, { 0x5d, 0x00, 0x00 } },{ 3, { 0x5e, 0x00, 0x00 } },
+ { 3, { 0x5f, 0x00, 0x00 } },{ 3, { 0x60, 0x00, 0x00 } },
+ { 3, { 0x61, 0x00, 0x00 } },{ 3, { 0x62, 0x00, 0x00 } },
+ { 3, { 0x63, 0x00, 0x00 } },{ 3, { 0x64, 0x00, 0x00 } },
+ { 3, { 0x65, 0x00, 0x00 } },{ 3, { 0x66, 0x00, 0x00 } },
+ { 3, { 0x67, 0x00, 0x00 } },{ 3, { 0x68, 0x00, 0x00 } },
+ { 3, { 0x69, 0x00, 0x00 } },{ 3, { 0x6a, 0x00, 0x00 } },
+ { 3, { 0x6b, 0x00, 0x00 } },{ 3, { 0x6c, 0x00, 0x00 } },
+ { 3, { 0x6d, 0x00, 0x00 } },{ 3, { 0x6e, 0x00, 0x00 } },
+ { 3, { 0x6f, 0x00, 0x00 } },{ 3, { 0x70, 0x00, 0x00 } },
+ { 3, { 0x71, 0x00, 0x00 } },{ 3, { 0x72, 0x00, 0x00 } },
+ { 3, { 0x73, 0x00, 0x00 } },{ 3, { 0x74, 0x00, 0x00 } },
+ { 3, { 0x75, 0x00, 0x00 } },{ 3, { 0x76, 0x00, 0x00 } },
+ { 3, { 0x77, 0x00, 0x00 } },{ 3, { 0x41, 0x00, 0x42 } },
+ { 3, { 0x42, 0x10, 0x42 } },{ 3, { 0x43, 0x20, 0x42 } },
+ { 3, { 0x44, 0x30, 0x42 } },{ 3, { 0x45, 0x00, 0x01 } },
+ { 3, { 0x46, 0x00, 0x01 } },{ 3, { 0x47, 0x00, 0x01 } },
+ { 3, { 0x48, 0x00, 0x01 } },
+ { 9, { 0x01, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
+ { 9, { 0x21, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
+ { 9, { 0x09, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
+ { 9, { 0x29, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
+ { 9, { 0x11, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
+ { 9, { 0x31, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
+ { 9, { 0x19, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
+ { 9, { 0x39, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
+ { 9, { 0x05, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
+ { 9, { 0x25, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
+ { 9, { 0x0d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
+ { 9, { 0x2d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
+ { 9, { 0x15, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
+ { 9, { 0x35, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
+ { 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
+ { 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
+ { 3, { 0x80, 0xb3, 0x0a } },
+ {-1, { 0} }
+};
+
+static const unsigned char mxb_saa7111_init[] = {
+ 0x00, 0x00, /* 00 - ID byte */
+ 0x01, 0x00, /* 01 - reserved */
+
+ /*front end */
+ 0x02, 0xd8, /* 02 - FUSE=x, GUDL=x, MODE=x */
+ 0x03, 0x23, /* 03 - HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0, GAFIX=0, GAI1=256, GAI2=256 */
+ 0x04, 0x00, /* 04 - GAI1=256 */
+ 0x05, 0x00, /* 05 - GAI2=256 */
+
+ /* decoder */
+ 0x06, 0xf0, /* 06 - HSB at xx(50Hz) / xx(60Hz) pixels after end of last line */
+ 0x07, 0x30, /* 07 - HSS at xx(50Hz) / xx(60Hz) pixels after end of last line */
+ 0x08, 0xa8, /* 08 - AUFD=x, FSEL=x, EXFIL=x, VTRC=x, HPLL=x, VNOI=x */
+ 0x09, 0x02, /* 09 - BYPS=x, PREF=x, BPSS=x, VBLB=x, UPTCV=x, APER=x */
+ 0x0a, 0x80, /* 0a - BRIG=128 */
+ 0x0b, 0x47, /* 0b - CONT=1.109 */
+ 0x0c, 0x40, /* 0c - SATN=1.0 */
+ 0x0d, 0x00, /* 0d - HUE=0 */
+ 0x0e, 0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0, FCTC=0, CHBW=1 */
+ 0x0f, 0x00, /* 0f - reserved */
+ 0x10, 0xd0, /* 10 - OFTS=x, HDEL=x, VRLN=x, YDEL=x */
+ 0x11, 0x8c, /* 11 - GPSW=x, CM99=x, FECO=x, COMPO=x, OEYC=1, OEHV=1, VIPB=0, COLO=0 */
+ 0x12, 0x80, /* 12 - xx output control 2 */
+ 0x13, 0x30, /* 13 - xx output control 3 */
+ 0x14, 0x00, /* 14 - reserved */
+ 0x15, 0x15, /* 15 - VBI */
+ 0x16, 0x04, /* 16 - VBI */
+ 0x17, 0x00, /* 17 - VBI */
+};
+
+/* bring hardware to a sane state. this has to be done, just in case someone
+ wants to capture from this device before it has been properly initialized.
+ the capture engine would badly fail, because no valid signal arrives on the
+ saa7146, thus leading to timeouts and stuff. */
+static int mxb_init_done(struct saa7146_dev* dev)
+{
+ struct mxb* mxb = (struct mxb*)dev->ext_priv;
+ struct video_decoder_init init;
+ struct i2c_msg msg;
+
+ int i = 0, err = 0;
+ struct tea6415c_multiplex vm;
+
+ /* select video mode in saa7111a */
+ i = VIDEO_MODE_PAL;
+ /* fixme: currently pointless: gets overwritten by configuration below */
+ mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_NORM, &i);
+
+ /* write configuration to saa7111a */
+ init.data = mxb_saa7111_init;
+ init.len = sizeof(mxb_saa7111_init);
+ mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_INIT, &init);
+
+ /* select tuner-output on saa7111a */
+ i = 0;
+ mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_INPUT, &i);
+
+ /* enable vbi bypass */
+ i = 1;
+ mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_VBI_BYPASS, &i);
+
+ /* select a tuner type */
+ i = 5;
+ mxb->tuner->driver->command(mxb->tuner,TUNER_SET_TYPE, &i);
+
+ /* mute audio on tea6420s */
+ mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[6][0]);
+ mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[6][1]);
+ mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_cd[6][0]);
+ mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_cd[6][1]);
+
+ /* switch to tuner-channel on tea6415c*/
+ vm.out = 17;
+ vm.in = 3;
+ mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm);
+
+ /* select tuner-output on multicable on tea6415c*/
+ vm.in = 3;
+ vm.out = 13;
+ mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm);
+
+ /* tune in some frequency on tuner */
+ mxb->tuner->driver->command(mxb->tuner, VIDIOCSFREQ, &freq);
+
+ /* the rest for mxb */
+ mxb->cur_input = 0;
+ mxb->cur_freq = freq;
+ mxb->cur_mute = 1;
+
+ mxb->cur_mode = V4L2_TUNER_MODE_STEREO;
+ mxb->tda9840->driver->command(mxb->tda9840, TDA9840_SWITCH, &mxb->cur_mode);
+
+ /* check if the saa7740 (aka 'sound arena module') is present
+ on the mxb. if so, we must initialize it. due to lack of
+ informations about the saa7740, the values were reverse
+ engineered. */
+ msg.addr = 0x1b;
+ msg.flags = 0;
+ msg.len = mxb_saa7740_init[0].length;
+ msg.buf = &mxb_saa7740_init[0].data[0];
+
+ if( 1 == (err = i2c_transfer(&mxb->i2c_adapter, &msg, 1))) {
+ /* the sound arena module is a pos, that's probably the reason
+ philips refuses to hand out a datasheet for the saa7740...
+ it seems to screw up the i2c bus, so we disable fast irq
+ based i2c transactions here and rely on the slow and safe
+ polling method ... */
+ extension.flags &= ~SAA7146_USE_I2C_IRQ;
+ for(i = 1;;i++) {
+ if( -1 == mxb_saa7740_init[i].length ) {
+ break;
+ }
+
+ msg.len = mxb_saa7740_init[i].length;
+ msg.buf = &mxb_saa7740_init[i].data[0];
+ if( 1 != (err = i2c_transfer(&mxb->i2c_adapter, &msg, 1))) {
+ DEB_D(("failed to initialize 'sound arena module'.\n"));
+ goto err;
+ }
+ }
+ INFO(("'sound arena module' detected.\n"));
+ }
+err:
+ /* the rest for saa7146: you should definitely set some basic values
+ for the input-port handling of the saa7146. */
+
+ /* ext->saa has been filled by the core driver */
+
+ /* some stuff is done via variables */
+ saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source, input_port_selection[mxb->cur_input].hps_sync);
+
+ /* some stuff is done via direct write to the registers */
+
+ /* this is ugly, but because of the fact that this is completely
+ hardware dependend, it should be done directly... */
+ saa7146_write(dev, DD1_STREAM_B, 0x00000000);
+ saa7146_write(dev, DD1_INIT, 0x02000200);
+ saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
+
+ return 0;
+}
+
+/* interrupt-handler. this gets called when irq_mask is != 0.
+ it must clear the interrupt-bits in irq_mask it has handled */
+/*
+void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask)
+{
+ struct mxb* mxb = (struct mxb*)dev->ext_priv;
+}
+*/
+
+static struct saa7146_ext_vv vv_data;
+
+/* this function only gets called when the probing was successful */
+static int mxb_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
+{
+ struct mxb* mxb = (struct mxb*)dev->ext_priv;
+
+ DEB_EE(("dev:%p\n",dev));
+
+ /* checking for i2c-devices can be omitted here, because we
+ already did this in "mxb_vl42_probe" */
+
+ saa7146_vv_init(dev,&vv_data);
+ if( 0 != saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) {
+ ERR(("cannot register capture v4l2 device. skipping.\n"));
+ return -1;
+ }
+
+ /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/
+ if( 0 != MXB_BOARD_CAN_DO_VBI(dev)) {
+ if( 0 != saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) {
+ ERR(("cannot register vbi v4l2 device. skipping.\n"));
+ }
+ }
+
+ i2c_use_client(mxb->tea6420_1);
+ i2c_use_client(mxb->tea6420_2);
+ i2c_use_client(mxb->tea6415c);
+ i2c_use_client(mxb->tda9840);
+ i2c_use_client(mxb->saa7111a);
+ i2c_use_client(mxb->tuner);
+
+ printk("mxb: found 'Multimedia eXtension Board'-%d.\n",mxb_num);
+
+ mxb_num++;
+ mxb_init_done(dev);
+ return 0;
+}
+
+static int mxb_detach(struct saa7146_dev* dev)
+{
+ struct mxb* mxb = (struct mxb*)dev->ext_priv;
+
+ DEB_EE(("dev:%p\n",dev));
+
+ i2c_release_client(mxb->tea6420_1);
+ i2c_release_client(mxb->tea6420_2);
+ i2c_release_client(mxb->tea6415c);
+ i2c_release_client(mxb->tda9840);
+ i2c_release_client(mxb->saa7111a);
+ i2c_release_client(mxb->tuner);
+
+ saa7146_unregister_device(&mxb->video_dev,dev);
+ if( 0 != MXB_BOARD_CAN_DO_VBI(dev)) {
+ saa7146_unregister_device(&mxb->vbi_dev,dev);
+ }
+ saa7146_vv_release(dev);
+
+ mxb_num--;
+
+ i2c_del_adapter(&mxb->i2c_adapter);
+ kfree(mxb);
+
+ return 0;
+}
+
+static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
+{
+ struct saa7146_dev *dev = fh->dev;
+ struct mxb* mxb = (struct mxb*)dev->ext_priv;
+ struct saa7146_vv *vv = dev->vv_data;
+
+ switch(cmd) {
+ case VIDIOC_ENUMINPUT:
+ {
+ struct v4l2_input *i = arg;
+
+ DEB_EE(("VIDIOC_ENUMINPUT %d.\n",i->index));
+ if( i->index < 0 || i->index >= MXB_INPUTS) {
+ return -EINVAL;
+ }
+ memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input));
+
+ return 0;
+ }
+ /* the saa7146 provides some controls (brightness, contrast, saturation)
+ which gets registered *after* this function. because of this we have
+ to return with a value != 0 even if the function succeded.. */
+ case VIDIOC_QUERYCTRL:
+ {
+ struct v4l2_queryctrl *qc = arg;
+ int i;
+
+ for (i = MAXCONTROLS - 1; i >= 0; i--) {
+ if (mxb_controls[i].id == qc->id) {
+ *qc = mxb_controls[i];
+ DEB_D(("VIDIOC_QUERYCTRL %d.\n",qc->id));
+ return 0;
+ }
+ }
+ return -EAGAIN;
+ }
+ case VIDIOC_G_CTRL:
+ {
+ struct v4l2_control *vc = arg;
+ int i;
+
+ for (i = MAXCONTROLS - 1; i >= 0; i--) {
+ if (mxb_controls[i].id == vc->id) {
+ break;
+ }
+ }
+
+ if( i < 0 ) {
+ return -EAGAIN;
+ }
+
+ switch (vc->id ) {
+ case V4L2_CID_AUDIO_MUTE: {
+ vc->value = mxb->cur_mute;
+ DEB_D(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n",vc->value));
+ return 0;
+ }
+ }
+
+ DEB_EE(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n",vc->value));
+ return 0;
+ }
+
+ case VIDIOC_S_CTRL:
+ {
+ struct v4l2_control *vc = arg;
+ int i = 0;
+
+ for (i = MAXCONTROLS - 1; i >= 0; i--) {
+ if (mxb_controls[i].id == vc->id) {
+ break;
+ }
+ }
+
+ if( i < 0 ) {
+ return -EAGAIN;
+ }
+
+ switch (vc->id ) {
+ case V4L2_CID_AUDIO_MUTE: {
+ mxb->cur_mute = vc->value;
+ if( 0 == vc->value ) {
+ /* switch the audio-source */
+ mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[mxb->cur_input]][0]);
+ mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[mxb->cur_input]][1]);
+ } else {
+ mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[6][0]);
+ mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[6][1]);
+ }
+ DEB_EE(("VIDIOC_S_CTRL, V4L2_CID_AUDIO_MUTE: %d.\n",vc->value));
+ break;
+ }
+ }
+ return 0;
+ }
+ case VIDIOC_G_INPUT:
+ {
+ int *input = (int *)arg;
+ *input = mxb->cur_input;
+
+ DEB_EE(("VIDIOC_G_INPUT %d.\n",*input));
+ return 0;
+ }
+ case VIDIOC_S_INPUT:
+ {
+ int input = *(int *)arg;
+ struct tea6415c_multiplex vm;
+ int i = 0;
+
+ DEB_EE(("VIDIOC_S_INPUT %d.\n",input));
+
+ if (input < 0 || input >= MXB_INPUTS) {
+ return -EINVAL;
+ }
+
+ /* fixme: locke das setzen des inputs mit hilfe des mutexes
+ down(&dev->lock);
+ video_mux(dev,*i);
+ up(&dev->lock);
+ */
+
+ /* fixme: check if streaming capture
+ if ( 0 != dev->streaming ) {
+ DEB_D(("VIDIOC_S_INPUT illegal while streaming.\n"));
+ return -EPERM;
+ }
+ */
+
+ mxb->cur_input = input;
+
+ saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, input_port_selection[input].hps_sync);
+
+ /* prepare switching of tea6415c and saa7111a;
+ have a look at the 'background'-file for further informations */
+ switch( input ) {
+
+ case TUNER:
+ {
+ i = 0;
+ vm.in = 3;
+ vm.out = 17;
+
+ if ( 0 != mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm)) {
+ printk("VIDIOC_S_INPUT: could not address tea6415c #1\n");
+ return -EFAULT;
+ }
+ /* connect tuner-output always to multicable */
+ vm.in = 3;
+ vm.out = 13;
+ break;
+ }
+ case AUX3_YC:
+ {
+ /* nothing to be done here. aux3_yc is
+ directly connected to the saa711a */
+ i = 5;
+ break;
+ }
+ case AUX3:
+ {
+ /* nothing to be done here. aux3 is
+ directly connected to the saa711a */
+ i = 1;
+ break;
+ }
+ case AUX1:
+ {
+ i = 0;
+ vm.in = 1;
+ vm.out = 17;
+ break;
+ }
+ }
+
+ /* switch video in tea6415c only if necessary */
+ switch( input ) {
+ case TUNER:
+ case AUX1:
+ {
+ if ( 0 != mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm)) {
+ printk("VIDIOC_S_INPUT: could not address tea6415c #3\n");
+ return -EFAULT;
+ }
+ break;
+ }
+ default:
+ {
+ break;
+ }
+ }
+
+ /* switch video in saa7111a */
+ if ( 0 != mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_INPUT, &i)) {
+ printk("VIDIOC_S_INPUT: could not address saa7111a #1.\n");
+ }
+
+ /* switch the audio-source only if necessary */
+ if( 0 == mxb->cur_mute ) {
+ mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[input]][0]);
+ mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[input]][1]);
+ }
+
+ return 0;
+ }
+ case VIDIOC_G_TUNER:
+ {
+ struct v4l2_tuner *t = arg;
+ int byte = 0;
+
+ if( 0 != t->index ) {
+ DEB_D(("VIDIOC_G_TUNER: channel %d does not have a tuner attached.\n", t->index));
+ return -EINVAL;
+ }
+
+ DEB_EE(("VIDIOC_G_TUNER: %d\n", t->index));
+
+ memset(t,0,sizeof(*t));
+ strcpy(t->name, "Television");
+
+ t->type = V4L2_TUNER_ANALOG_TV;
+ t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
+ t->rangelow = 772; /* 48.25 MHZ / 62.5 kHz = 772, see fi1216mk2-specs, page 2 */
+ t->rangehigh = 13684; /* 855.25 MHz / 62.5 kHz = 13684 */
+ /* FIXME: add the real signal strength here */
+ t->signal = 0xffff;
+ t->afc = 0;
+
+ mxb->tda9840->driver->command(mxb->tda9840,TDA9840_DETECT, &byte);
+ t->audmode = mxb->cur_mode;
+
+ if( byte < 0 ) {
+ t->rxsubchans = V4L2_TUNER_SUB_MONO;
+ } else {
+ switch(byte) {
+ case TDA9840_MONO_DETECT: {
+ t->rxsubchans = V4L2_TUNER_SUB_MONO;
+ DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_MONO.\n"));
+ break;
+ }
+ case TDA9840_DUAL_DETECT: {
+ t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
+ DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_LANG1.\n"));
+ break;
+ }
+ case TDA9840_STEREO_DETECT: {
+ t->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
+ DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_STEREO.\n"));
+ break;
+ }
+ default: { /* TDA9840_INCORRECT_DETECT */
+ t->rxsubchans = V4L2_TUNER_MODE_MONO;
+ DEB_D(("VIDIOC_G_TUNER: TDA9840_INCORRECT_DETECT => V4L2_TUNER_MODE_MONO\n"));
+ break;
+ }
+ }
+ }
+
+ return 0;
+ }
+ case VIDIOC_S_TUNER:
+ {
+ struct v4l2_tuner *t = arg;
+ int result = 0;
+ int byte = 0;
+
+ if( 0 != t->index ) {
+ DEB_D(("VIDIOC_S_TUNER: channel %d does not have a tuner attached.\n",t->index));
+ return -EINVAL;
+ }
+
+ switch(t->audmode) {
+ case V4L2_TUNER_MODE_STEREO: {
+ mxb->cur_mode = V4L2_TUNER_MODE_STEREO;
+ byte = TDA9840_SET_STEREO;
+ DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_STEREO\n"));
+ break;
+ }
+ case V4L2_TUNER_MODE_LANG1: {
+ mxb->cur_mode = V4L2_TUNER_MODE_LANG1;
+ byte = TDA9840_SET_LANG1;
+ DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1\n"));
+ break;
+ }
+ case V4L2_TUNER_MODE_LANG2: {
+ mxb->cur_mode = V4L2_TUNER_MODE_LANG2;
+ byte = TDA9840_SET_LANG2;
+ DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG2\n"));
+ break;
+ }
+ default: { /* case V4L2_TUNER_MODE_MONO: {*/
+ mxb->cur_mode = V4L2_TUNER_MODE_MONO;
+ byte = TDA9840_SET_MONO;
+ DEB_D(("VIDIOC_S_TUNER: TDA9840_SET_MONO\n"));
+ break;
+ }
+ }
+
+ if( 0 != (result = mxb->tda9840->driver->command(mxb->tda9840, TDA9840_SWITCH, &byte))) {
+ printk("VIDIOC_S_TUNER error. result:%d, byte:%d\n",result,byte);
+ }
+
+ return 0;
+ }
+ case VIDIOC_G_FREQUENCY:
+ {
+ struct v4l2_frequency *f = arg;
+
+ if(0 != mxb->cur_input) {
+ DEB_D(("VIDIOC_G_FREQ: channel %d does not have a tuner!\n",mxb->cur_input));
+ return -EINVAL;
+ }
+
+ memset(f,0,sizeof(*f));
+ f->type = V4L2_TUNER_ANALOG_TV;
+ f->frequency = mxb->cur_freq;
+
+ DEB_EE(("VIDIOC_G_FREQ: freq:0x%08x.\n", mxb->cur_freq));
+ return 0;
+ }
+ case VIDIOC_S_FREQUENCY:
+ {
+ struct v4l2_frequency *f = arg;
+ int t_locked = 0;
+ int v_byte = 0;
+
+ if (0 != f->tuner)
+ return -EINVAL;
+
+ if (V4L2_TUNER_ANALOG_TV != f->type)
+ return -EINVAL;
+
+ if(0 != mxb->cur_input) {
+ DEB_D(("VIDIOC_S_FREQ: channel %d does not have a tuner!\n",mxb->cur_input));
+ return -EINVAL;
+ }
+
+ DEB_EE(("VIDIOC_S_FREQUENCY: freq:0x%08x.\n",f->frequency));
+
+ mxb->cur_freq = f->frequency;
+
+ /* tune in desired frequency */
+ mxb->tuner->driver->command(mxb->tuner, VIDIOCSFREQ, &mxb->cur_freq);
+
+ /* check if pll of tuner & saa7111a is locked */
+// mxb->tuner->driver->command(mxb->tuner,TUNER_IS_LOCKED, &t_locked);
+ mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_GET_STATUS, &v_byte);
+
+ /* not locked -- anything to do here ? */
+ if( 0 == t_locked || 0 == (v_byte & DECODER_STATUS_GOOD)) {
+ }
+
+ /* hack: changing the frequency should invalidate the vbi-counter (=> alevt) */
+ spin_lock(&dev->slock);
+ vv->vbi_fieldcount = 0;
+ spin_unlock(&dev->slock);
+
+ return 0;
+ }
+ case MXB_S_AUDIO_CD:
+ {
+ int i = *(int*)arg;
+
+ if( i < 0 || i >= MXB_AUDIOS ) {
+ DEB_D(("illegal argument to MXB_S_AUDIO_CD: i:%d.\n",i));
+ return -EINVAL;
+ }
+
+ DEB_EE(("MXB_S_AUDIO_CD: i:%d.\n",i));
+
+ mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_cd[i][0]);
+ mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_cd[i][1]);
+
+ return 0;
+ }
+ case MXB_S_AUDIO_LINE:
+ {
+ int i = *(int*)arg;
+
+ if( i < 0 || i >= MXB_AUDIOS ) {
+ DEB_D(("illegal argument to MXB_S_AUDIO_LINE: i:%d.\n",i));
+ return -EINVAL;
+ }
+
+ DEB_EE(("MXB_S_AUDIO_LINE: i:%d.\n",i));
+ mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[i][0]);
+ mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[i][1]);
+
+ return 0;
+ }
+ case VIDIOC_G_AUDIO:
+ {
+ struct v4l2_audio *a = arg;
+
+ if( a->index < 0 || a->index > MXB_INPUTS ) {
+ DEB_D(("VIDIOC_G_AUDIO %d out of range.\n",a->index));
+ return -EINVAL;
+ }
+
+ DEB_EE(("VIDIOC_G_AUDIO %d.\n",a->index));
+ memcpy(a, &mxb_audios[video_audio_connect[mxb->cur_input]], sizeof(struct v4l2_audio));
+
+ return 0;
+ }
+ case VIDIOC_S_AUDIO:
+ {
+ struct v4l2_audio *a = arg;
+ DEB_D(("VIDIOC_S_AUDIO %d.\n",a->index));
+ return 0;
+ }
+ default:
+/*
+ DEB2(printk("does not handle this ioctl.\n"));
+*/
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std)
+{
+ struct mxb* mxb = (struct mxb*)dev->ext_priv;
+ int zero = 0;
+ int one = 1;
+
+ if(V4L2_STD_PAL_I == std->id ) {
+ DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n"));
+ /* set the 7146 gpio register -- I don't know what this does exactly */
+ saa7146_write(dev, GPIO_CTRL, 0x00404050);
+ /* unset the 7111 gpio register -- I don't know what this does exactly */
+ mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &zero);
+ } else {
+ DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n"));
+ /* set the 7146 gpio register -- I don't know what this does exactly */
+ saa7146_write(dev, GPIO_CTRL, 0x00404050);
+ /* set the 7111 gpio register -- I don't know what this does exactly */
+ mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &one);
+ }
+ return 0;
+}
+
+static struct saa7146_standard standard[] = {
+ {
+ .name = "PAL-BG", .id = V4L2_STD_PAL_BG,
+ .v_offset = 0x17, .v_field = 288,
+ .h_offset = 0x14, .h_pixels = 680,
+ .v_max_out = 576, .h_max_out = 768,
+ }, {
+ .name = "PAL-I", .id = V4L2_STD_PAL_I,
+ .v_offset = 0x17, .v_field = 288,
+ .h_offset = 0x14, .h_pixels = 680,
+ .v_max_out = 576, .h_max_out = 768,
+ }, {
+ .name = "NTSC", .id = V4L2_STD_NTSC,
+ .v_offset = 0x16, .v_field = 240,
+ .h_offset = 0x06, .h_pixels = 708,
+ .v_max_out = 480, .h_max_out = 640,
+ }, {
+ .name = "SECAM", .id = V4L2_STD_SECAM,
+ .v_offset = 0x14, .v_field = 288,
+ .h_offset = 0x14, .h_pixels = 720,
+ .v_max_out = 576, .h_max_out = 768,
+ }
+};
+
+static struct saa7146_pci_extension_data mxb = {
+ .ext_priv = "Multimedia eXtension Board",
+ .ext = &extension,
+};
+
+static struct pci_device_id pci_tbl[] = {
+ {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7146,
+ .subvendor = 0x0000,
+ .subdevice = 0x0000,
+ .driver_data = (unsigned long)&mxb,
+ }, {
+ .vendor = 0,
+ }
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_ext_vv vv_data = {
+ .inputs = MXB_INPUTS,
+ .capabilities = V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE,
+ .stds = &standard[0],
+ .num_stds = sizeof(standard)/sizeof(struct saa7146_standard),
+ .std_callback = &std_callback,
+ .ioctls = &ioctls[0],
+ .ioctl = mxb_ioctl,
+};
+
+static struct saa7146_extension extension = {
+ .name = MXB_IDENTIFIER,
+ .flags = SAA7146_USE_I2C_IRQ,
+
+ .pci_tbl = &pci_tbl[0],
+ .module = THIS_MODULE,
+
+ .probe = mxb_probe,
+ .attach = mxb_attach,
+ .detach = mxb_detach,
+
+ .irq_mask = 0,
+ .irq_func = NULL,
+};
+
+static int __init mxb_init_module(void)
+{
+ if( 0 != saa7146_register_extension(&extension)) {
+ DEB_S(("failed to register extension.\n"));
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void __exit mxb_cleanup_module(void)
+{
+ saa7146_unregister_extension(&extension);
+}
+
+module_init(mxb_init_module);
+module_exit(mxb_cleanup_module);
+
+MODULE_DESCRIPTION("video4linux-2 driver for the Siemens-Nixdorf 'Multimedia eXtension board'");
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_LICENSE("GPL");