Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/irda/smsc-ircc2.h b/drivers/net/irda/smsc-ircc2.h
new file mode 100644
index 0000000..458611c
--- /dev/null
+++ b/drivers/net/irda/smsc-ircc2.h
@@ -0,0 +1,194 @@
+/*********************************************************************
+ * $Id: smsc-ircc2.h,v 1.12.2.1 2002/10/27 10:52:37 dip Exp $
+ *
+ * Description: Definitions for the SMC IrCC chipset
+ * Status: Experimental.
+ * Author: Daniele Peri (peri@csai.unipa.it)
+ *
+ * Copyright (c) 2002 Daniele Peri
+ * All Rights Reserved.
+ *
+ * Based on smc-ircc.h:
+ *
+ * Copyright (c) 1999-2000, Dag Brattli <dagb@cs.uit.no>
+ * Copyright (c) 1998-1999, Thomas Davis (tadavis@jps.net>
+ * All Rights Reserved
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#ifndef SMSC_IRCC2_H
+#define SMSC_IRCC2_H
+
+/* DMA modes needed */
+#define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */
+#define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */
+
+/* Master Control Register */
+#define IRCC_MASTER 0x07
+#define IRCC_MASTER_POWERDOWN 0x80
+#define IRCC_MASTER_RESET 0x40
+#define IRCC_MASTER_INT_EN 0x20
+#define IRCC_MASTER_ERROR_RESET 0x10
+
+/* Register block 0 */
+
+/* Interrupt Identification */
+#define IRCC_IIR 0x01
+#define IRCC_IIR_ACTIVE_FRAME 0x80
+#define IRCC_IIR_EOM 0x40
+#define IRCC_IIR_RAW_MODE 0x20
+#define IRCC_IIR_FIFO 0x10
+
+/* Interrupt Enable */
+#define IRCC_IER 0x02
+#define IRCC_IER_ACTIVE_FRAME 0x80
+#define IRCC_IER_EOM 0x40
+#define IRCC_IER_RAW_MODE 0x20
+#define IRCC_IER_FIFO 0x10
+
+/* Line Status Register */
+#define IRCC_LSR 0x03
+#define IRCC_LSR_UNDERRUN 0x80
+#define IRCC_LSR_OVERRUN 0x40
+#define IRCC_LSR_FRAME_ERROR 0x20
+#define IRCC_LSR_SIZE_ERROR 0x10
+#define IRCC_LSR_CRC_ERROR 0x80
+#define IRCC_LSR_FRAME_ABORT 0x40
+
+/* Line Status Address Register */
+#define IRCC_LSAR 0x03
+#define IRCC_LSAR_ADDRESS_MASK 0x07
+
+/* Line Control Register A */
+#define IRCC_LCR_A 0x04
+#define IRCC_LCR_A_FIFO_RESET 0x80
+#define IRCC_LCR_A_FAST 0x40
+#define IRCC_LCR_A_GP_DATA 0x20
+#define IRCC_LCR_A_RAW_TX 0x10
+#define IRCC_LCR_A_RAW_RX 0x08
+#define IRCC_LCR_A_ABORT 0x04
+#define IRCC_LCR_A_DATA_DONE 0x02
+
+/* Line Control Register B */
+#define IRCC_LCR_B 0x05
+#define IRCC_LCR_B_SCE_DISABLED 0x00
+#define IRCC_LCR_B_SCE_TRANSMIT 0x40
+#define IRCC_LCR_B_SCE_RECEIVE 0x80
+#define IRCC_LCR_B_SCE_UNDEFINED 0xc0
+#define IRCC_LCR_B_SIP_ENABLE 0x20
+#define IRCC_LCR_B_BRICK_WALL 0x10
+
+/* Bus Status Register */
+#define IRCC_BSR 0x06
+#define IRCC_BSR_NOT_EMPTY 0x80
+#define IRCC_BSR_FIFO_FULL 0x40
+#define IRCC_BSR_TIMEOUT 0x20
+
+/* Register block 1 */
+
+#define IRCC_FIFO_THRESHOLD 0x02
+
+#define IRCC_SCE_CFGA 0x00
+#define IRCC_CFGA_AUX_IR 0x80
+#define IRCC_CFGA_HALF_DUPLEX 0x04
+#define IRCC_CFGA_TX_POLARITY 0x02
+#define IRCC_CFGA_RX_POLARITY 0x01
+
+#define IRCC_CFGA_COM 0x00
+#define IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK 0x87
+#define IRCC_CFGA_IRDA_SIR_A 0x08
+#define IRCC_CFGA_ASK_SIR 0x10
+#define IRCC_CFGA_IRDA_SIR_B 0x18
+#define IRCC_CFGA_IRDA_HDLC 0x20
+#define IRCC_CFGA_IRDA_4PPM 0x28
+#define IRCC_CFGA_CONSUMER 0x30
+#define IRCC_CFGA_RAW_IR 0x38
+#define IRCC_CFGA_OTHER 0x40
+
+#define IRCC_IR_HDLC 0x04
+#define IRCC_IR_4PPM 0x01
+#define IRCC_IR_CONSUMER 0x02
+
+#define IRCC_SCE_CFGB 0x01
+#define IRCC_CFGB_LOOPBACK 0x20
+#define IRCC_CFGB_LPBCK_TX_CRC 0x10
+#define IRCC_CFGB_NOWAIT 0x08
+#define IRCC_CFGB_STRING_MOVE 0x04
+#define IRCC_CFGB_DMA_BURST 0x02
+#define IRCC_CFGB_DMA_ENABLE 0x01
+
+#define IRCC_CFGB_MUX_COM 0x00
+#define IRCC_CFGB_MUX_IR 0x40
+#define IRCC_CFGB_MUX_AUX 0x80
+#define IRCC_CFGB_MUX_INACTIVE 0xc0
+
+/* Register block 3 - Identification Registers! */
+#define IRCC_ID_HIGH 0x00 /* 0x10 */
+#define IRCC_ID_LOW 0x01 /* 0xB8 */
+#define IRCC_CHIP_ID 0x02 /* 0xF1 */
+#define IRCC_VERSION 0x03 /* 0x01 */
+#define IRCC_INTERFACE 0x04 /* low 4 = DMA, high 4 = IRQ */
+#define IRCC_INTERFACE_DMA_MASK 0x0F /* low 4 = DMA, high 4 = IRQ */
+#define IRCC_INTERFACE_IRQ_MASK 0xF0 /* low 4 = DMA, high 4 = IRQ */
+
+/* Register block 4 - IrDA */
+#define IRCC_CONTROL 0x00
+#define IRCC_BOF_COUNT_LO 0x01 /* Low byte */
+#define IRCC_BOF_COUNT_HI 0x00 /* High nibble (bit 0-3) */
+#define IRCC_BRICKWALL_CNT_LO 0x02 /* Low byte */
+#define IRCC_BRICKWALL_CNT_HI 0x03 /* High nibble (bit 4-7) */
+#define IRCC_TX_SIZE_LO 0x04 /* Low byte */
+#define IRCC_TX_SIZE_HI 0x03 /* High nibble (bit 0-3) */
+#define IRCC_RX_SIZE_HI 0x05 /* High nibble (bit 0-3) */
+#define IRCC_RX_SIZE_LO 0x06 /* Low byte */
+
+#define IRCC_1152 0x80
+#define IRCC_CRC 0x40
+
+/* Register block 5 - IrDA */
+#define IRCC_ATC 0x00
+#define IRCC_ATC_nPROGREADY 0x80
+#define IRCC_ATC_SPEED 0x40
+#define IRCC_ATC_ENABLE 0x20
+#define IRCC_ATC_MASK 0xE0
+
+
+#define IRCC_IRHALFDUPLEX_TIMEOUT 0x01
+
+#define IRCC_SCE_TX_DELAY_TIMER 0x02
+
+/*
+ * Other definitions
+ */
+
+#define SMSC_IRCC2_MAX_SIR_SPEED 115200
+#define SMSC_IRCC2_FIR_CHIP_IO_EXTENT 8
+#define SMSC_IRCC2_SIR_CHIP_IO_EXTENT 8
+#define SMSC_IRCC2_FIFO_SIZE 16
+#define SMSC_IRCC2_FIFO_THRESHOLD 64
+/* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
+#define SMSC_IRCC2_RX_BUFF_TRUESIZE 14384
+#define SMSC_IRCC2_TX_BUFF_TRUESIZE 14384
+#define SMSC_IRCC2_MIN_TURN_TIME 0x07
+#define SMSC_IRCC2_WINDOW_SIZE 0x07
+/* Maximum wait for hw transmitter to finish */
+#define SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US 1000 /* 1 ms */
+/* Maximum wait for ATC transceiver programming to finish */
+#define SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES 1
+#endif /* SMSC_IRCC2_H */